Organizational diagnosis (OD) is a comprehensive review of an organization's objectives, re-source allocation, and utilization to achieve those objectives. This study employed OD to en-hance the effectiveness of the Department of Special Education within the Government of Punjab. A questionnaire based on Weisbord's six-box organizational model called the Organ-izational Diagnostic Questionnaire (ODQ), was administered to N=1200 participants, consist-ing of heads of top, middle, and bottom tiers at district and tehsil levels of special education schools, centers, and the main office. Out of these, 506 participants voluntarily completed the ODQ survey. The study findings indicated that the employees of the department possess a good understanding of the organization's objectives. However, there is a lack of opportunities for employee participation in departmental discussions, centralized decision-making, irra-tional task distribution, and unsupportive allocation of human resources. Additionally, there is poor communication, unsatisfactory promotions, incentives, and a lack of knowledge shar-ing among employees, as well as poor inter-relationships, conflicts, and ineffective help-seeking mechanisms. The study also revealed low readiness for change in the organization. Respondents' opinions differed significantly based on their qualifications, job experience, years served, and gender. To improve the department's capacity to absorb change, the study recommends enhancing collaboration and inter-departmental communication, soliciting comprehensive input from all tiers, and promoting employee participation, supportive supervision, and communication. The study contributes to the body of knowledge on OD and highlights the need for improved communication, collaboration, and employee participation, as well as a supportive and supervisory support system to enhance the effectiveness of organizations.

The research aims to discover the natural occurrence of patulin (PAT) in selected citrus fruits from the central cities of Punjab and Pakistan's Northern cities. Total 2970 samples of twelve citrus fruits; kinnow, orange, grapefruits, bitter orange, mausami, red blood, pineapple, sweet orange, rough lime, sweet lime, kagzi lime and lemon were examined using liquid chromatography fitted with UV detector. The limit of detection (LOD) and quantification limit was 0.04 and 0.12 µg/kg, respectively. The results have shown that 56% of samples of citrus fruits from Punjab's central cities, Pakistan, were discovered to be infected from PAT. The elevated amounts of PAT ranging from 0.04 to 1150 µg/kg were found in citrus fruit samples from Multan cities. Furthermore, 31.7% of samples of citrus fruits from Northern cities of Pakistan were discovered to be infected with PAT, and the elevated amounts were found ranging from 0.04-320 µg/kg from Swat city. About 22.1% of samples of citrus fruits have levels of PAT greater than the suggested limits established by the European Union (EU). PAT's dietary intake levels ranged from 0.10-1.11 µg/kg bw/day from the central cities of Punjab, Pakistan, and 0.13-1.93 µg/kg bw/day were documented from Northern cities of Pakistan.

Introduction: Lung cancer remains a global health concern, with non-small cell lung cancer (NSCLC) comprising the majority of cases. Early detection of lung cancer has led to an increased number of cases identified in the earlier stages of NSCLC. This required the revaluation of the NSCLC treatment approaches for early-stage NSCLC. Methods: We conducted a comprehensive search using multiple databases to identify relevant studies on treatment modalities for early-stage NSCLC. Inclusion criteria prioritized but were not limited to, clinical trials and meta-analyses on surgical approaches to early-stage NSCLC conducted from 2021 onwards. Discussion: Minimally invasive approaches, such as VATS and RATS, along with lung resection techniques, including sublobar resection have emerged as treatments for early-stage NSCLC. Ground-glass opacities (GGOs) hve shown prognostic significance, especially when analyzing the consolidation-tumor ratio (CTR). There have also been updates on managing GGOs, including the non-surgical approaches, the extent of lung resection indicated, and the level of lymphadenectomy required. Conclusion: The management of early-stage NSCLC requires further assessment of treatment strategies. This includes understanding the required extent of surgical resection, interpreting the significance of GGOs (specifically GGOs with a high CTR), and evaluating the efficacy of alternative therapies. Customized treatment involving surgical and non-surgical interventions is essential for advancing patient care.

This study was performed to evaluate the efficacy of nicotinic acid against Streptococcus pneumoniae biofilm. The experimental results indicate that S. pneumoniae forms biofilms, particularly at the liquid-air interface, as evidenced by the pellicle assay. Nicotinic acid demonstrated significant inhibition of S. pneumoniae biofilm formation at 6 h and 18 h, with higher concentrations leading to lower biofilm biomass, suggesting a concentration-dependent response. However, minimal biofilm inhibition was observed at 12 h. Treatment with nicotinic acid induced FTIR spectral changes in protein biomolecules of S. pneumoniae biofilm at 6 h and 18 h, evidenced by alterations in spectral peaks at 750 cm-1, 906 cm-1, 1540 cm-1, 1548 cm-1, and 1644 cm-1. Notably, no FTIR spectral changes were detected in 12 h S. pneumoniae biofilm following exposure to nicotinic acid. These findings suggest that nicotinic acid inhibits biofilm formation in a time and concentration-dependent manner, possibly by altering the structure of protein biomolecules within the biofilm.

The purpose of this paper is to explore the effect of corporate social responsibility (CSR) on brand image in the apparel industry in Jordan, using the moderating variable of customer consciousness. The current research uses a quantitative, descriptive, cause-effect, and cross-sectional approach, and also it uses a convenience sampling method. Data was collected from 440 respondents. Results indicate that Jordanian Apparel organizations have medium to highly implementing of all items and constructs of CSR, brand image items, and consciousness items. Moreover, there is a strong relationship between CSR dimensions, a medium relationship be-tween each CSR dimension and brand image, a medium relationship between each CSR dimension and consciousness, a medium relationship between total CSR and brand image, a medium relationship between total CSR and consciousness, and the medium relationship between brand image and consciousness. Results of the first model show that total CSR affects the brand image. Where social responsibility has the highest positive effect, followed by ethical responsibility, then economic responsibility, however, environmental responsibility negatively affects the brand image. The second model shows consciousness moderates the effect of CSR on the brand image. The study recommends longitudinal research on the Jordanian Apparel industry, especially to test the effect of environmental responsibility on the brand image. Moreover, the re-search uses customers’ consciousness as a moderating variable, which improves the effect of CSR on brand image. The Apparel industry organizations in Jordan should revise their daily practices particularly environmental responsibility and/or increase their customers’ awareness of their practices. Finally, the current research contributes to existing studies by using consciousness as a moderating variable.

Background: This study aims to investigate the effects of visual neurofeedback stimulation on the brain activity in overweight cases. The neuroscience studies indicated the personal decision about eating under the impact of environmental factors such as (visually, smelling, tasting) is related to neural activity of the prefrontal lobe of the brain. Therefore, there were many attempts to modify the food intake behavior in overweight cases through the stimulation of the prefrontal cortex. However, the empirical viewing of EEG-neurofeedback experiments has not explicated the details about the effect of the EEG-NF, the specificity of positive treatment effects remains in a challenging scope.Methods: This study is a cue-exposure EEG-NF experiment to verify the hypothesis of effecting the EEG-NF on the electrical activity of PFC and modifying the general symptoms of food intake behavior in overweight cases. Twenty-four individuals were recruited as participants for this study. These participants were assigned randomly into two groups; the EX-Group (N=12) enrolled in 8 sessions of the EEG-NF experiment, and the C-Group (N=12) was listed in no EEG-NF sessions. The participants provided researchers with a self-report questionnaire relating to their observation of general symptoms of food intake behavior, and EEG signals recordings into the pre and posts stimulation phase. The power spectral density (PSD) method was applied for EEG parameters extraction.Results: The results of a two-way analysis of variance (ANOVA) explained that a significant variation in variables between the two groups after the EEG-NF experiment. The analysis of the quantitative variables indicated that the effect of EEG-NF experiment was a significant decrement in EEG power bands which significantly influenced changing the median of self-report questionnaire responses that is related to general symptoms of food intake behavior.Conclusions: This study provides preliminary support for the therapeutic potential of EEG-NF experiment that targets the prefrontal cortex, to influence neural processes underlying food intake behavior in overweight cases.

Silicon-based photonic integrated circuit (PIC) is a research focus in producing high-density photonics. One of the potential applications of silicon PIC is the sensing and measurement system. In this work, we use the one-dimensional photonic crystal (1D-PhC) cavity design which and utilize it at the PIC level design. The 1D PhC design used as the compact model has the same characteristics as experimentally demonstrated in previous works. The compact model is made from the S-parameter extraction of the 1D-PhC device which is done by using Lumerical FDTD software. The PIC design integrates the 1D-PhC device as a sensing component with a PN-phase shifter (PN-PS) to function as a refractive index (RI) sensor calibration or tuning circuit. A custom design of PN-PS device is used by simulating and extracting the bias voltage-effective index (bias-Neff) data by using Lumerical DEVICE and MODE into the circuit simulator. The circuit-level simulation is done by using Lumerical Interconnect software. Finally, we show the GDSII layout design of the 1D-PhC based photonic sensor calibration circuit with an analysis of generic silicon PIC design rules. The designed PIC is applicable for the bio-sensing applications and photonic SOC component. This work also shows the promise of PIC design approach for further PIC development.

The objectives of the current research were to determine the levels of deoxynivalenol (DON) in four different cultivars of corn and subsequently to investigate the fate of DON during pro-cessing steps involved for the production of cornbread. The samples (n = 30) of each cultivar which were found positive were selected for the study. The average level of DON was ranged from LOD to 650 µg/kg. The amount of DON in cornflour samples were ranged from LOD to 630 µg/kg and insignificantly lower than the levels found in corn grain samples (p ≥ 0.05). Further-more, the levels of DON in corn dough samples were insignificantly higher than the levels in cornflour samples (p ≥ 0.05), with levels ranged from LOD to 645 µg/kg. However, the amount of DON in cornbread samples was significantly different from the levels found in corn grains sam-ples (p ≤ 0.05), with levels ranged from LOD to 611.5 µg/kg. The percentage reduction of DON in grains to cornbread samples was 22.4%, 35.6%, 44.5%, and 42.6% in type 1, type 2, type 3, and type 4 cultivars, respectively. The highest dietary exposure and hazard quotient (HQ) of DON was 0.13 and 0.17 µg/kg bw/d, in male and female individuals resulted from the consumption of cornbread samples, respectively.

The study focused on investigating the natural incidence of deoxynivalenol (DON) in corn and products from corn producing districts of Punjab, Pakistan. The analysis was carried out using HPLC with UV detector and immunoaffinity cleanup columns. The detection limit (LOD) and limit of quantification were 25 and 50 µg/kg, respectively. Total 1220 samples of corn and products were analyzed to detect the DON, and 539 (44.2%) samples were observed to be contaminated with DON (n ≥ LOD). Furthermore, 92 (7.5%) samples of corn & products have DON levels, elevated than the proposed limits of the EU. The data is significantly different from a normal distribution for DON in corn and products samples and from different locations (p < 0.05) for Shapiro-Wilk and Kolmogorov-Smirnov values. However, a significant difference in DON levels was found between corn and corn derived-products types (p ≤ 0.05). The lowest and highest exposure & hazard quotient (HQ) of 0.92 and 9.68 µg/kg bw/d were documented in cornflour samples.

Some herbicides exert hormetic or biphasic non-monotonic dose-response (NMDR), which is one of the major challenges for ecological risk assessment (ERA) of pesticides pollution. In this study, fish embryo toxicity test (FET) with Javanese medaka (Oryzias javanicus) to sublethal concentration of diuron was determined. Inverted U-shape heart rate was observed at 3 days post-exposure (dpe) and 7 dpe. However, at 13 dpe the heart rate (104 ± 2.90 heartbeat/min.) decreased in 10.00 mg.L-1 exposed-embryos. At 20 dpe, hatchability and survival rate were reduced in 5.00 mg.L-1 and 10.00 mg.L-1 exposed groups. Hormetic developmental deformities were observed in embryo-larvae of Javanese medaka. The results revealed a biphasic effect of low concentrations of diuron on some morphological and physiological features of Javanese medaka embryo-larvae, which might be attributed to endocrine disruption of this herbicide. Further studies to support these effects were recommended.

A university canteen is a queueing system characterised by non-stationary time of arrival with limited resources where the arrival rate is time dependent and has different pattern of arrival for different time interval. This means at certain time of the day, the arrival rate is much higher than other time and for a university canteen, the arrival rate of customer during the lunchtime is much higher and the food (resources) is limited. Non-stationary time dependent queueing system is not easily modelled mathematically hence such queueing systems are modelled using simulation tools such as ARENA. In order to model a non-stationary time dependent queueing system with limited resources and solve queueing problems using ARENA, researchers have to depend on their knowledge and experience in identifying the appropriate and relevant parameters for the system and make modifications to these parameters of the system to solve queueing problems by means of trial and error. Hence, this research work explores the potentials of applying a systematic problem solving tool, TRIZ to help users to make better decisions in deriving solutions to improve a non-stationary time dependent queueing system with limited resources. A case study was carried out to minimize the waiting time of the customers at the cafeteria of the Faculty of Engineering, Universiti Putra Malaysia (UPM), which has queueing problems for years during lunchtime. TRIZ was applied in this case study and the results showed that TRIZ can assist researchers to derive a solution model that lead to shorter waiting time without incurring additional cost and resources.

Farmers are continually looking for new reliable, objective and non-invasive methods for evaluation of ewe condition. Live weight (LW) and body condition score (BCS) are used by farmers as a basis to determine the condition of the animal. Body composition is an important aspect of monitoring animal condition. The body composition is the amount of fat, lean and bone; knowing the amount of each is important because the information can be used for better strategic management interventions. Experiments were conducted to establish the relationship between body composition and body parameters, at key life’s stages (weaning and pre-mating), using measurements automatically determined by an image processing ap-plication at Lincoln University sheep farm for 88 Coopworth ewes. Computerized Tomography technology was used to develop relationship with body parameters and a subset was used to validate the predicted model. Multivariate linear regression (MLR), artificial neural network (ANNs) and regression tree (RT) statistical analysis methods were evaluated to determine their efficacy to predict body fat, lean and bone. The results showed a correlation between fat, lean and bone determined by CT and the fat, lean, bone weight estimated by live weight and body parameters calculated using the image processing application with R2 values of 0.90 for fat, 0.72 for lean and 0.50 for bone using ANNs statistical model. From these results, farmers can utilize accurate measures of fat which will enhance nutritional and management practices.

Climate change has become the greatest threat to the survival of world and its ecosystem. With the irreversible impact on the ecosystem, problems like rise in sea level, food-insecurity, natural resources scarcity, seasonal disorders have increased over the past few years. Among these problems, the issue of water scarcity due to the lack of water resources and global warming has plagued several nations. Owing to the rising concerns over water scarcity United Nations (UN) has acknowledged water as a primary resource to the development of societies under the ‘Water Goal’ of the sustainable development goals. As the changing climate and intermittent availability of water resources pose major challenges to forecast demand, especially in countries like the United Arab Emirates (UAE) which has one of the highest per capita residential water consumption rates in the world. Therefore, the aim of this study is to propose an accurate water demand forecasting technique that incorporates all significant factors to predict the future water demands of the UAE. The forecasting model used is the Long Short Term Memory (LSTM), with the factors considered are mean temperature, mean rainfall, relative humidity, Gross Domestic Product (GDP), Consumer Price Index (CPI) and population growth. The LSTM model predicts the water demand forecasting in the UAE showing that the future demand will decrease from 1821 million m3 in 2018 to 1809.9 million m3 in 2027.

Various type of soils have been identified based on their electrical and magnetic properties, especially with regards to peat soils. Peat soils are commonly considered as partly decomposed vegetation. In this study, electrical and magnetic properties have been used in K-means clustering to identify layers of peat soils. K-means clustering is a partitioning method that treats observations in the data. Data cores were obtained at every centimeter and examined for their electrical conductivity (σ) and magnetic susceptibility (χ_m) properties. A 291 cm core was obtained at Tegal Arum Village in South Kalimantan, Indonesia. The K-means clustering results indicate two different layers at 148 cm, and this is supported by loss on ignition (LOI) measurements. In the first layers, a 87.65% LOI was found associated with peat soils (above 248 cm). Whereas, in the second layers, there was a 26.11% LOI associated with mineral soils (below 248 cm). The results of this study using K-means clustering can be used to delineate soil layers.

Sustainable Humanitarian logistics is gaining attention due to increased disasters. It involves various operations to support people's survival efforts. Key characteristics include unpredictable demand, sudden large demand volumes, high stakes in delivery timeliness, and limited resources. However, the complexity and unpredictability of disaster scenarios necessitate robust and adaptable performance measurement models to evaluate the effectiveness of sustainable humanitarian relief logistics (SHRL). This study proposes a novel performance measurement model for sustainable humanitarian logistics and supply chains that integrates the Fuzzy Delphi Method (FDM) and Fuzzy Decision-Making Trial and Evaluation Laboratory (Fuzzy-DEMATEL) method. In this research, using 115 articles focused on sustainable humanitarian logistics and supply chains, crisis management, and humanitarian aid, this research identified 25 key performance indicators (KPIs) in the initial phase. Following the implementation of FDM, 19 KPIs were identified as crucial for further analysis. These KPIs were then divided into four distinct categories: "Quality," "Accountability," "Operational Excellence," and "Sustainability". Initially, FDM is utilized to reach a consensus among experts concerning KPIs for humanitarian logistics and supply chains. By incorporating the inherent uncertainty and vagueness in expert judgments, FDM refines the list of key performance indicators that reflect the real-life conditions and constraints in disaster operations. Finally, the fuzzy DEMATEL approach was used to analyze interrelationships among factors, identifying cause-and-effect behavior and ranking them, forming a robust theoretical framework. The study concludes with the development of a comprehensive performance measurement model that facilitates the strategic planning and operational assessment of humanitarian organization operations. The integration of FDM and fuzzy DEMATEL methods offers multiple perspectives for decision-making and helps stakeholders identify critical areas for improvement. Based on the acquired results, the KPIs attached to the Quality (P1) aspect of the proposed framework have gained significant importance and main cause in the cause-and-effect relationship which impacts and is helpful to improve the performance of humanitarian organizations in all phases of disaster management. The KPIs prompt delivery (D1), and delivery accuracy (D2) are more significant, while capacity building and training (D19) and delivery compliance (D15) are least significant in SHRL scenarios. This research is expected to support humanitarian organizations in enhancing their capabilities, thereby improving the effectiveness and efficiency of aid delivery in disaster-stricken areas.

Despite advancements in antiretroviral therapy (ART) that reduces the viral load to undetectable levels, viral eradication has not been achieved due to HIV-1 persistence in resting CD4+ T-cells. We, therefore, characterized the tat gene, which is essential for HIV-1 replication, from 20 viro-logically controlled HIV-infected (HIV+) older patients on long-term ART with improved CD4+ T-cell counts. PBMC genomic DNA from HIV+ patients were used to amplify tat gene by PCR fol-lowed by nucleotide sequencing and analysis. Phylogenetic analysis showed that each patient’s tat sequences were confined to their own subtrees and well discriminated from other patients’ sequences. Moreover, there was a low degree of viral heterogeneity and lower estimates of genetic diversity within these patients’ tat sequences. Most patients’ Tat deduced amino acid sequences showed intact open reading frames and maintained the important functional domains for Tat functions, including transactivation, TAR binding and nuclear localization. Furthermore, Tat deduced amino acid sequences showed variation in previously characterized cytotoxic T lym-phocytes (CTL) epitopes, suggesting escape mutants. In conclusion, a low degree of genetic varia-bility and conservation of functional domains and variations in CTL epitopes were the features of tat sequences from 20 HIV+ older patients with undetectable viral load on long-term ART.

From the standpoint of Neoliberal Institutionalism, this study explores Malaysia's participation in activities that make energy the topic and/or object of foreign policies, whether through bilateral or multilateral engagements. This research, which aims to evaluate the relevance of energy in Malaysia's economy and diplomacy and to explain Malaysia's reason for its involvement in these cooperations, is necessary because of Malaysia's growing involvement in the global energy market. Information for this study was gathered from a variety of government sources, interviews, published statistical data, and previous studies. The study demonstrates how vital energy is to Malaysia's economy. The Lao PDR-Thailand-Malaysia-Singapore Power Integration Project (LTMS-PIP) initiative, in which Malaysia is participating, is evidence of the viability of multilateral power commerce in the area. The Peninsula Gas Utilisation (PGU) pipeline in Peninsular Malaysia and the Four-Fuel Diversification Policy 1981 (4FDP 1981), which increases natural gas utilisation, are related to Malaysia's participation in the Malaysia-Thailand Joint Development Area (MT-JDA). Malaysia would want to think about streamlining its energy administration.

Alcohol use disorder (AUD) represents major public and socioeconomic issues. Alcohol exerts its phar-macological effects by altering different neurotransmitter systems, such as g-aminobutyric acid (GABA), glutamate, opioids, etc. Recent evidence suggests that the dynorphin (DYN)/kappa opioid receptor (KOR) system mediates the negative affective states associated with alcohol withdrawal. This system is also in-volved in stress-mediated alcohol intake in alcohol-dependent subjects. The DYN/KOR system probably exerts its action in the central nucleus of the amygdala (CeA) to mediate the negative affective states as-sociated with alcohol withdrawal. This article aims to review the current literature regarding the role of the DYN/KOR system in the actions of alcohol. We first review the literature regarding the effect of alcohol on the level of the peptide and its receptor, and the role of the endogenous DYN/KOR system in alcohol reward and negative affective states associated with alcohol withdrawal is then discussed. We also review the literature regarding the effects of KOR ligands on these processes.

Ganoderma boninense is the major causal agent for the basal stem rot (BSR) disease in oil palm, causing the progressive rot of the basal part of the stem. Despite its prominence, key pathogenicity determinants for the aggressive nature of hemibiotrophic infection remain unknown. In this study, genome sequencing and annotation of G. boninense T10 were carried out using the Illumina sequencing platform and comparative genome analysis was performed with previously reported G. boninense strains (NJ3 and G3). The pan-secretome of G. boninense was constructed and comprised of 937 core orthogroups, 243 accessory orthogroups, and 84 strain-specific orthogroups. A set of core candidate effector proteins (CEPs) were found to be enriched with catalytic protein classified as the carbohydrate-active enzymes, hydrolases as well as non-catalytic proteins. Differential expression analysis revealed an upregulation of CEP genes which was linked to the suppression of PTI signaling cascade while the downregulation of CEP genes was linked to the inhibition of PTI by preventing host defense elicitation. Genome architecture analysis revealed the one-speed architecture of the G. boninense genome and the lack of preferential association of CEP genes to the transposable elements. The findings obtained from this study would aid in the characterization of pathogenicity determinants and molecular biomarkers of BSR disease.

Machine Learning has completely transformed health care system, which transmits medical data through IOT sensors. So it is very important to encrypt them to protect patient data. encrypting medical images from a performance perspective consumes time; hence the use of an auto encoder is essential. An auto encoder is used in this work to compress the image as a vector prior to the encryption process. The digital image passes across description function and a decoder to get back the image in the proposed work; various experiments are carried out on hyper parameters to achieve the highest outcome of the classification. The findings demonstrate that the combination of Mean Square Logarithmic Error as the loss function, ADA grad as an optimizer, two layers for the encoder, and another reverse for the decoder, RELU as the activation function generates the best auto encoder results. The combination of Mean square error (lose function), RMS prop (optimizer), three layers for the encoder and another reverse for the decoder, and RELU (activation function) has the best classification result. All the experiments with different hyper parameter has run almost very close to each other even when changing the number of layers. The running time is between 9 and 16 second for each epoch.

In this study, a novel porous geopolymer mortar (GP) was produced and tested experimentally. Industrial waste materials/by-products were used as constituents of the GP, along with dune sand. One sample was produced as a control sample for benchmarking. For the rest of the samples, 15%, 30%, and 45% by volume, the solid constituents were replaced with expanded polystyrene foam (EPS) beads. These mortar samples were heat cured to depolymerize the EPS to cause porosity inside the samples. Indoor experiments were conducted to evaluate the response of produced porous GP to high heat flux. The porous samples were able to reduce heat transmission across the opposite surfaces. Induced porosity resulted in a decrement in compressive strength from 77.2 MPa for the control sample to 15.8 MPa for 45% porous sample. However, the limit lies within the standards for partitioning walls in buildings and pavements in urban areas to absorb rainwater.

Excitotoxicity related to the dysfunction of the N-methyl-d-aspartate receptor (NMDAR) has been indicated to play an integral role in the pathophysiology of multiple disease states, including neurodegenerative disorders such as Parkinson’s disease. There is a notable gap in the market for novel NMDAR antagonists, however current methods to analyze potential antagonists rely on indirect measurements of calcium flux and hazardous radioligand binding assays. Recently, a fluorescent NMDAR ligand, N-adamantan-1-yl-dimethylamino-1-naphthalenesulfonic acid, known as AM-DAN was developed by our group. Additional studies on this ligand is necessary to evaluate its potential as a biological tool in NMDAR research. Therefore, this study was aimed at conducting structural analyses, fluorescence experiments, high-accuracy NMDAR molecular modelling and NMDAR phencyclidine (PCP) site competition binding studies using AM-DAN. Results revealed that AM-DAN has appropriate structural properties, significant fluorescent ability in various solvents and is able to bind selectively and compete for the PCP-binding site of the NMDAR. Therefore, AM-DAN holds promise as a novel fluorescent ligand to measure the affinity of prospective drugs binding at the NMDAR PCP-site and may circumvent the use of radioligands.

Many corner detector techniques have already been used in extracting information from UAV images to perform various photogrammetric and mapping activities. Among these techniques is the Feature from Accelerated Segment Test (FAST) and the Harris corner detector. It is widely agreed that the evaluation of detectors is of great importance because it evaluates and enhances the accuracy of the detected features. This research evaluates the performance of FAST-9 and FAST-12 as well as the Harris detector in terms of the repeatability rate, completeness, and correctness under different threshold values. Each method is evaluated in terms of its ability for detection UAV objects (crowd and cars features). Then the common detected features between both FAST versions and the Harris detector are extracted. This is to determine which method performs best under different image conditions (e.g., illumination variations, camera position and orientation, and image noise). The results show that the size of the threshold plays a crucial role in determining the number of detected feature points. An increase in the threshold value leads to a decrease in the number of detected points and vice versa. Thus, the correctness decreases whereas the completeness increases as a function of the threshold values. Furthermore, the relationship between the FAST-9 and the Harris detector is slightly better than those between the FAST-12 and the Harris detector. This is because the number of common features between the FAST-9 and the Harris detector are relatively higher than those between the FAST-12 and the Harris detector.

Gesture recognition has always been a technique to decrease the distance between the physical and the digital world. In this work, we introduce an Arduino based vehicle system which no longer require manual controlling of the cars. The proposed work is achieved by utilizing the Arduino microcontroller, accelerometer, RF sender/receiver, and Bluetooth. Two main contributions are presented in this work. Firstly, we show that the car can be controlled with hand-gestures according to the movement and position of the hand. Secondly, the proposed car system is further extended to be controlled by an android based mobile application having different modes (e.g., touch buttons mode, voice recognition mode). In addition, an automatic obstacle detection system is introduced to improve the safety measurements to avoid any hazards. The proposed systems are designed at lab-scale prototype to experimentally validate the efficiency, accuracy, and affordability of the systems. We remark that the proposed systems can be implemented under real conditions at large-scale in the future that will be useful in automobiles and robotics applications.

This study assesses the pursued impacts of Tulsi value chain development intervention on the livelihoods of rural poor in Uttarakhand state of India. Tulsi as an alternative livelihood, particularly for the rural poor, is less explored. With increased crop depredation of major cereal crops grown in the district by wild animals and pests, and decreasing availability of water agriculture, attempts were made to improve earnings from Tulsi as an alternative livelihood. Findings suggest that the average households’ gross profit from Tulsi farming increases by more than double within a span of two years. Total crop income of beneficiary farmers’ increases by 0.8 percent for every 1 percent increase in Tulsi income. Intervention helped enhance productivity of Tulsi, thereby enhancing earnings from Tulsi farming. Most importantly, intervention has shown a tremendous adoption rate. Towards the end of the intervention, the value chain work was out-scaled to another 19 villages in Chamoli district, thereby reaching out to more than 400 households.

Electrification coverage in Sarawak is the lowest at 78.74%, compared to Peninsular Malaysia at 99.62% and Sabah at 82.51%. Kapit, Sarawak with its 88.4% populations located in rural areas and mostly situated along the main riverbanks has great potential to generate electrical energy by hydrokinetic system. Yearly water velocity data is the most significant parameter to perform hydrokinetic analysis study. Nevertheless, the data retrieved from local river databases are inadequate for river energy analysis, thus hindering its progression. Instead, flow rates and rainfall data had been utilised to estimate the water velocity data. This signifies no estimation of water velocity in an unregulated river by using water level data had been made. Therefore, a novel technique of estimating the daily average water velocity data in unregulated rivers is proposed. The modelling of regression equation for water velocity estimation was performed and two regression model equations were generated to estimate both water level and water velocity on-site and proven to be valid as the coefficient of determination values had been R² = 87.4% and R²=87.9%, respectively. The combination of both regression model equations can be used to estimate long-term time series water velocity data for type-C unregulated river in remote areas.

This research work focuses on the potential application of an organic compound, santalol obtained from santalum album in the inhibition of the enzyme tyrosinase which is actively involved in the biosynthesis of the melanin pigment. Over-production of melanin causes undesirable pigmentation in humans as well as other organisms that significantly downgrade their aesthetic value. The study is designed to explain the purification of tyrosinase from the mushroom Agaricus bisporus, followed by activity assay and enzyme kinetic to give insight into the santalol modulated tyrosinase inhibition in a dose dependent manner. The multi-spectroscopic techniques like UV-vis, fluorescence, and isothermal calorimetry are employed to deduce the efficiency of santalol as potential candidate against the tyrosinase enzyme activity. Experimental results are further verified by molecular docking. Santalol derived from the essential oils of santalum album, is widely used as remedy for skin disorders and potion for fair complexion since ancient times. Based on enzyme kinetics and biophysical characterization, this is the first scientific evidence where santalol inhibits tyrosinase, which may be employed in agriculture, food, and cosmetic industries by prevent excess melanin formation or browning.

The endoplasmic reticulum (ER) plays a multifunctional role in lipid biosynthesis, calcium storage, protein folding, and processing. Thus, maintaining ER homeostasis in insulin-secreting beta-cells is essential. Several pathophysiological conditions and pharmacological agents disrupt the ER homeostasis, thereby causing ER stress. The cells react to ER stress by initiating an adaptive signaling process called the unfolded protein response (UPR). However, the ER initiates death signaling pathways whenever the ER stress persists. ER stress has been linked to several diseases, such as cancers, obesity, and diabetes. Thus, the regulation of ER stress may provide possible therapeutic targets for many diseases. Current evidence suggests that chronic hyperglycemia and hyperlipidemia linked to type II diabetes disrupt ER homeostasis, resulting in irreversible UPR activation and cells death. Despite much progress in understanding the pathophysiology of UPR and ER stress, to date, the mechanisms of ER stress in relation to type II diabetes remain unclear. This review provided up-to-date information regarding the current status of UPR, ER stress mechanisms, insulin dysfunction, oxidative stress, and the therapeutic potential of targeting specific ER stress pathways.

Salmonella enterica serovar Typhi, is one of the major infection spreading from consuming contaminated food and water. The poor sanitation is one the major cause for successful infection. S. typhi is responsible for causing typhoid fever, which is a growing public health concern in developing countries. This bacterium has acquired antimicrobial resistance to many promising which is a growing health concern for community. This study is aim to elucidate the molecular complexity of flouroquinolone resistance in S. Typhi isolates (n=286). Genomic data was downloaded from NCBI and analysis was done by Resfinder, MLST, and Pointfinder. Genomic analysis unveils a complex resistance profile, featuring antimicrobial resistance genes (ARG) including blaCTXM-15, blaTEM-1D, catA1, dfrA7, qnrS1, sul1, sul2, and tetA(B). The investigation focuses on mutations in DNA gyrA, parC, and qnrS1 genes which plays an important role in quinolone resistance. Mutation analysis reveals mutations such as DNA gyrA_S83F, DNA gyrA_D87N, DNA gyrA_S83Y, DNA gyrB_S464F, parC_S80I, and parE_L416F with the presence of qnrS1 gene produces resistance against quinolones. The Docking studies was conducted by “Autodock vina” and visualize by “Discovery studio” which demonstrate that these mutations leads to ciprofloxacin resistance, indicating reduced binding affinity, and altered solvent accessibility which indicates the structural changes at mutation sites. This study provides crucial insights into the molecular mechanisms driving flouroquinolone resistance in S. typhi, guiding future strategies to combat antibiotic resistance. Further validation through experimental mutagenesis is recommended, for targeted therapeutic interventions against the mounting threat of antibiotic-resistant S. typhi.

Background. Metronidazole treats obligate anaerobic bacterial and protozoal infections, with an elimination half-life of around eight hours. The long elimination half-life, the favorable ratio of steady-state serum levels to minimum inhibitory concentration, and the presence of active metabolites lead to consideration of metronidazole use at 12-hour dosage intervals. This systematic review aimed to compare the clinical outcomes of twice-daily and thrice-daily metronidazole dosing. Methods. We used the Preferred Reporting Items for Systematic Reviews and Meta-Analyses checklist. PubMed, Scopus, Science Direct, the Cochrane Database of Systematic Reviews, and the Cochrane Central Register of Controlled Trials to systematically identify all relevant studies published up to June 16, 2023. Results. The final analysis included two published retrospective cohort studies; a single site (n = 200) and a multisite study (n = 85) of ‘good’ quality, as measured by the Newcastle-Ottawa scale. The reported baseline characteristics of the 8-hour and 12-hour dosing groups were comparable, and neither study identified significant differences in primary and secondary clinical outcomes. Meta-analysis of the need to escalate antibiotic therapy also showed no statistically significant differences using the Mantel-Haenszel fixed-effect method (95% CI: 47.6% lower to 6.4 times higher risk, p = 0.342) and inverse-variance method (RR: 1.87, 95% CI: 0.52-6.65, p = 0.336). Conclusions. Dosing metronidazole every 12 hours is as effective as every 8-hour dosing for anaerobic infections. Healthcare systems may consider the adoption of every 12-hour metronidazole dosing with continued evaluation of patient outcomes.

With the development of health service, animal husbandry, aquaculture and chemical industry, more and more pollutants are discharged into the water environment, including antibiotics and heavy metal ions. These hazard substances pose a great threat to environment safety and human health. As two kinds of new green solvents, ionic liquids (ILs) and deep eutectic solvents (DESs) are widely used in various fields including separation and environmental engineering, which are attracting huge attention from academia and industry. In this study, the optimal ionic liquid and deep eutectic solvent were selected and their complex with β-cyclodextrin (β-CD) were firstly prepared by simple and effective inclusion way. After necessary characterization and analysis, two kinds of complex were applied to prepare a special sorbent disc with two different sides by adding diluent (excipient) and pressing under 5~15 MPa. As the result, the IL and DES could be stably immobilized on the disc and play the key role in selective adsorption for targets. Besides that, the experiments of different hazardous substances achieved the expected results. Based on this study, the complex disc showed a lot of merits in the separation performance, easy preparation and use, simple operation, and good stability. It was believed to be a useful tool for water purification and detection.

Three-dimensional reconstruction plays an important role in assisting doctors and surgeons in diagnosing bone defects’ healing progress. Common three-dimensional reconstruction methods include surface and volume rendering. As the focus is on the shape of the bone, volume rendering is omitted. Many improvements have been made on surface rendering methods like Marching Cubes and Marching Tetrahedra, but not many on working towards real-time or near real-time surface rendering for large medical images, and studying the effects of different parameter settings for the improvements. Hence, in this study, an attempt towards near real-time surface rendering for large medical images is made. Different parameter values are experimented on to study their effect on reconstruction accuracy, reconstruction and rendering time, and the number of vertices and faces. The proposed improvement involving three-dimensional data smoothing with convolution kernel Gaussian size 0.5 and mesh simplification reduction factor of 0.1, is the best parameter value combination for achieving a good balance between high reconstruction accuracy, low total execution time, and a low number of vertices and faces. It has successfully increased the reconstruction accuracy by 0.0235%, decreased the total execution time by 69.81%, and decreased the number of vertices and faces by 86.57% and 86.61% respectively.

Background: Maternal mortality (MM) is a matter of serious concern in low income developing countries (LDCs). Perspective: A great reduction has been observed regarding the maternal deaths globally after huge efforts since 1990 todate. However, the situation continues to be either stagnant or worsening in developing countries, suggesting that the efforts to cope with this issue are either insufficient or not properly implemented. We need to first diagnose the problem areas that are a great hurdle in the road to success towards the reduction of MM. Postpartum haemorrhage and preeclampsia are one of the most common causes of MM. Malnutrition, neurological dysfunction and cancer are among the non-obstetric causes. Trained medical and paramedical staff can be of great help in this regard by increasing awareness among masses at grass root level. Target set by Millennium Development goal has minimized the MM by 44%. But it has not met the target set by Millenium Development Goals 5 and a lot of measures need to be taken in this regard. Conclusions: Majority of the MDs are preventable and can be avoided by adopting appropriate frameworks, linked data sets, surveillance, birth attendants training, preparation for births, etc. Delay in decision to get healthcare, access to healthcare center and receiving these facilities are the main factors in MM.

In tracking-by-detection paradigm for multi-target tracking, target association is modeled as an optimization problem that is usually solved through network flow formulation. In this paper, we proposed combinatorial optimization formulation and used a bipartite graph matching for associating the targets in the consecutive frames. Usually, the target of interest is represented in a bounding box and track the whole box as a single entity. However, in the case of humans, the body goes through complex articulation and occlusion that severely deteriorate the tracking performance. To partially tackle the problem of occlusion, we argue that tracking the rigid body organ could lead to better tracking performance compared to the whole body tracking. Based on this assumption, we generated the target hypothesis of only the spatial locations of person’s heads in every frame. After the localization of head location, a constant velocity motion model is used for the temporal evolution of the targets in the visual scene. Qualitative results are evaluated on four challenging video surveillance dataset and promising results has been achieved.

The study investigates the determinants of mobile Internet banking adoption among Gen-Y in Malaysia. Align the issue of the study and research objectives, and the study underpinned Technology Acceptance Model (TAM) as the main guideline or a blueprint to analyze the research model. The study applied survey research design and analyzed using Structural Equation Modelling (SEM) under the PLS-SEM technique with SmartPLS 2.0. A total of 358 mobile internet banking users in Malaysia were random proportional selected as respondents and analyzed. Results from the partial least square structural equation modeling (PLS-SEM) revealed that perceived ease of use, perceived usefulness, facilitating condition, and personal innovativeness in IT have significantly influenced the attitude of mobile internet banking adoption in Malaysia. Additionally, perceived ease of use and facilitating conditions found to have a significant influence on the perceived usefulness of Mobile Internet Banking. Lastly, facilitating conditions and personal innovativeness in IT are significantly influence the perceived ease of use of mobile internet banking among Gen-Y in Malaysia

The Internet of Things (IoT) is an emerging technology that aims to enable the interconnection of a large number of smart devices and heterogeneous networks. Ad hoc networks play an important role in the designing of IoT-enabled platforms due to their efficient, flexible, low-cost, and dynamic infrastructures. These networks utilize the available resources efficiently to maintain the Quality of Service (QoS) in a multi-hop communication. However, in a multi-hop communication, the relay nodes can be malicious, thus requiring a secured and reliable data transmission. In this paper, we propose a QoS-aware secured communication scheme for IoT-based networks (QoS-IoT). In QoS-IoT, a Sybil attack detection mechanism is used for the identification of Sybil nodes and their forged identities in multi-hop communication. %by high-power and mobile nodes. After Sybil nodes detection, an optimal contention window (CW) is selected for QoS provisioning, i.e., to achieve per-flow fairness and efficient utilization of the available bandwidth. In a multi-hop communication, the MAC layer protocols do not perform well in terms of fairness and throughput, especially when the nodes generate a large amount of data. It is because the MAC layer has no capability of providing QoS to prioritized or forwarding flows. We evaluate the performance of QoS-IoT in terms of Sybil attack detection, fairness, throughput, and buffer utilization. The simulation results show that the proposed scheme outperforms the existing schemes and significantly enhances the performance of the network with a large volume of data. Moreover, the proposed scheme is resilient against Sybil attack.

Various methods of polymer surface tailoring have been studied to control the changes in wetting behavior. Polymers having precisely controlled wetting behavior in a specific environment are blessed with a wealth of opportunities and potential applications exploitable in biomaterial engineering. The controlled wetting behavior can be obtained by combining surface chemistry and morphology. Plasma assisted polymer surface modification technique have played a significant part to control surface chemistry and morphology. This review focuses on plasma polymerization and investigations regarding surface chemistry, surface wettability, coating kinetics, as well as coating stability. We begin with brief overview of plasma polymerization; these include growth mechanisms of plasma polymerization and influence of plasma parameters. Next, surface wettability and theoretical background structures and chemistry of superhydrophobic and superhydrophilic surfaces. In this review, overview of recent work on tunable wettability by tailoring surface chemistry and physical appearance (i.e. substrate texture) is also described. The formation of smart polymer coatings, which adjust their surface wettability by according to outside environment, including, pH, light, electric field and temperature. Finally, the applications of tunable wettability and pH responsiveness of polymer coatings in real life are addressed. This review should be of interest to plasma surface science communality specifically focused controlled wettability of smart polymer surfaces.

The fifth Industrial revolution (I5.0) prioritizes resilience and sustainability, integrating cognitive cyber-physical systems and advanced technologies to enhance machining processes. Numerous research studies have been conducted to optimize machining operations by identifying and reducing the sources of uncertainty and estimating the optimal cutting parameters. Virtual modeling and Tool Condition Monitoring (TCM) methodologies have been developed to assess the cutting states during machining processes. With a precise estimation of cutting states, the safety margin necessary to deal with the uncertainties can be reduced, resulting in improved process productivity. This paper reviews the recent advances in high-performance machining systems with a focus on the cyber-physical models developed for the cutting operation of difficult-to-cut materials using cemented carbide tools. An overview of the literature and background on the advances in the offline and online process optimization approaches have been presented. Process optimization objectives such as tool life utilization, dynamic stability, enhanced productivity, improved machined part quality, and reduced energy consumption and carbon emissions are independently investigated for the offline and online optimization methods. Addressing the critical objectives and constraints prevalent in industrial applications, the paper explores the challenges and opportunities inherent in developing a robust cyber-physical optimization system

This study aims to explore the E-marketing orientations and relationship management constructs in Jordanian startup enterprises to examine their influence on brand visibility and loyalty in the context of the digital market . The sample consists of 161 managers in startup companies, and structural equation modeling is used to study the relationships between the constructs of e-marketing orientation, capabilities, E-relationship management, brand visibility, and loyalty. The results illustrate that the realization of e-marketing orientation is directly achieved by capabilities and visibility, thereby stressing the importance of a formulated digital market approach and that the realization of effective e-relationship management directly expression by e-marketing capabilities, demonstrating the significance of the digital market concept’s approach. The results further demonstrate that e-marketing capabilities and visibility serve as mediators between the realization of e-marketing orientations and loyalty, Two explanations may be drawn, one from the R resource-Based View theory, and another derived from R elationship M arketing T heory Thus, the study has theoretical implications in terms of R esource-Based V iew and R elationship M arketing T heory. The study offers essential managerial insights for practitioners into the entrepreneurship domain concerned with the necessity of e-marketing capabilities and E-RM attitudes at a customer-centered approach and the strategic application of digital channels to enhance visibility in the intense competition context. Therefore, the empirical results have contributions as essential insights for both stakeholders and account for practical, theoretical, and managerial perspectives in the entrepreneurship domain.

In the realm of artificial intelligence (AI), generative systems, most notably Midjourney, have tremendous power to generate creative images of buildings and sites of Islamic architectural heritage through text-to-image generation based on the internet. The AI-generated representations have significant potential for architects, specialists, and common users. However, the system has considerable limitations when generating images for some buildings and sites where the representations appear too far from their original represented structures. This research article attempts to answer the question: What are the limitations of using the AI system of Midjourney in producing images similar to the original buildings and sites of the Islamic architectural heritage? The research employs prompt engineering techniques based on historical sources as inputs to examine the accuracy of the output of the AI-generated images of selected examples of structures of the Islamic tradition. It compares the output with the original look by employing direct observation and critical analysis of human intelligence (HI). It categorizes these limitations into four groups: (1) limits of the prompt, (2) limits of fame, (3) limits of regionality and historical styles, and (4) limits of architectural elements and details. It concludes that while Midjourney has great capability to represent high-end AI-generated images inspired by the Islamic tradition, it currently falls short of presenting the actual appearance of some of their original structures.

The Chat Generative Pre-training Transformer (GPT), also known as ChatGPT, is a powerful generative AI model that can simulate human-like dialogues across a variety of domains. However, this popularity has attracted the attention of malicious actors who exploit ChatGPT to launch cyberattacks. This paper examines the tactics that adversaries use to leverage ChatGPT in a variety of cyberattacks. Attackers pose as regular users and manipulate ChatGPT’s vulnerability to malicious interactions, particularly in the context of cyber assault. The paper presents illustrative examples of cyberattacks that are possible with ChatGPT and discusses the realm of ChatGPT-fueled cybersecurity threats. The paper also investigates the extent of user awareness of the relationship between ChatGPT and cyberattacks. A survey of 253 participants was conducted, and their responses were measured on a three-point Likert scale. The results provide a comprehensive understanding of how ChatGPT can be used to improve business processes and identify areas for improvement. Over 80% of the participants agreed that cyber criminals use ChatGPT for malicious purposes. This finding underscores the importance of improving the security of this novel model. Organizations must take steps to protect their computational infrastructure. This analysis also highlights opportunities for streamlining processes, improving service quality, and increasing efficiency. Finally, the paper provides recommendations for using ChatGPT in a secure manner, outlining ways to mitigate potential cyberattacks and strengthen defenses against adversaries.

The increading emission of carbon dioxide to the atmosphere has urged the scientific community to investigate alternatives to alleviate such emissions being the principal contributor to the greenhouse gas effect. One major alternative is carbon capture and utilisation (CCU) towards the production of value-added chemicals using diverse technologies. This work aims at the study of the catalytic potential of different cobalt-derived nanoparticels for methanol syntheis from carbon dioxide hydrogenation. Thanks to its abundance and cost-efficacy, cobalt can serve as an economical catalyst compared to noble-metal-based catalysts. In this work, we present a systematic comparison among different cobalt and cobalt oxide nanocomposites in terms of their efficiency as catalysts for carbon dioxide hydrogenation to methanol as well as how different supports can enhance their catalytic capacity. The oxygen vacancies in the cerium oxide act as carbon dioxide adsorption and activation sites, which facilitates a higher methanol production yield.

Purpose: This study aimed to describe the molecular epidemiology and seasonality of human rhinovirus (HRV) in chronic obstructive pulmonary disease (COPD) and its association with COPD exacerbations in Abu Dhabi, the United Arab Emirates (UAE). Methods: Sputum specimens were collected for analysis from all COPD patients who visited a medical center from November 2021 to October 2022. The real-time quantitative polymerase chain reaction (qPCR) test was used to detect HRV. Results: Of the 78 COPD patients included in the study, 58 (74%) pa-tients presented with one or more exacerbation episodes. The incidence of COPD exacerbation peaked over the winter and substantially decreased during the summer. HRV positivity in pa-tients during exacerbation (E1) was 11/58 (19%) and 15/58 (26%) two weeks after the exacerbation episode (E2). There was no significant difference in the HRV load in these patients. No statistically significant difference was observed in the detection of HRV during exacerbation compared to patients with stable COPD. Conclusion: This is the first study to assess the association between HRV detection by qPCR and COPD exacerbations in the UAE. The high sensitivity of the detec-tion technology helped collect reliable epidemiologic data. Few studies have provided similar Middle East data. This study's pattern of COPD exacerbations and HRV detection parallels that of temperate countries. This information can help with future, more extensive surveillance of res-piratory viruses in the UAE and the Middle East and their association with COPD exacerbations.

Fault detection in PV arrays and inverters is critical for ensuring maximum efficiency and performance. Artificial intelligence (AI) learning can be used to quickly identify issues, resulting in a sustainable environment with reduced downtime and maintenance costs. As the use of solar energy systems continues to grow, the need for reliable and efficient fault detection and diagnosis techniques becomes more critical. This paper presents a novel approach for fault detection in photovoltaic (PV) arrays and inverters, combining AI techniques. It integrates Elman Neural Network (ENN), Boosted Tree Algorithms (BTA), Multi-layer Perceptron (MLP), and Gaussian Processes Regression (GPR) for enhanced accuracy and reliability in fault diagnosis. It leverages their strengths for accuracy and reliability of fault diagnosis. Feature engineering-based sensitivity analysis was utilized for feature extraction, the fault detection and diagnosis were assessed using several statistical criteria including PBAIS, MAE, NSE, RMSE, and MAPE. Two intelligent learning scenarios are carried out, the first scenario is done for PV array fault detection with DC power (DCP) as output. The second scenario is done for inverter fault detection with AC power (ACP) as the output. The proposed technique is capable of detecting faults in PV arrays and inverters, providing a reliable solution for enhancing the performance and reliability of solar energy systems. Real-world solar energy dataset is used to evaluate the proposed technique, with results compared to existing detection techniques and obtained results show that it outperforms existing fault detection techniques, achieving higher accuracy and better performance. The GPR-M4 optimization justified reliably among all the models with MAPE=0.0393, and MAE=0.002 for inverter fault detection and MAPE=0.091, and MAE=0.000 for PV array fault detection.

Biogeochemical models estimate soil organic carbon (SOC) sequestration, crop growth, and yield. The DeNitrification and DeComposition (DNDC) model was used to simulate soil SOC dynamics and harvested C-biomass in rice-wheat rotation under organic/inorganic fertilizations with conventional tillage (CT) and reduced tillage (RT). Before calibration, DNDC under-predicted harvestable grain C-biomass of rice by 29.22% to 42.14% and over-simulated grain C-biomass of wheat by 55.01% with equal amounts of NPK and animal manure applied under CT. However, after calibration by adjusting default values of soil/crop parameters, DNDC simulated harvestable grain C-biomass of both crops very close to observed values (only -2.81% to -6.17% less). DNDC also predicted effects of nutrient management practices on grain C-biomass of rice/wheat under CT/RT using d-index (0.76 to 0.96) and the calculated root mean squared error (RMSE of 165.36 to 494.18 kg C ha-1). DNDC simulated SOC trends for rice-wheat using measured values of several statistical indices. Regression analysis between modeled and observed SOC dynamics was significant with R2 ranging from 0.35 to 0.46 (p < 0.01), and intercept ranging from 0.30 to 1.34 (p < 0.65). DNDC demonstrated that combined inorganic and organic fertilization may result in higher C-biomass and more SOC sequestration in rice-wheat systems.

Gwadar is essential for Pakistan's financial stability. The third deep-water port in Pakistan, Gwadar, plays a significant part in trade between the Gulf countries, Africa, China, United Arab Emirates, and Cordillera Administrative Region. However, the load Shedding of 12-16 hours in Gwadar is the most concerning issue. Pakistan imports 70 MW of electricity from Iran. The wind and solar system are already installed but for a limited residential area. In Gwadar, there are enough renewable energy resources that can be utilized for electricity generation. In this context, a Techno and Economic Analysis is performed using the Hybrid Optimization Model for Multiple Energy Resources (HOMER) Pro. Two models are considered for this study. Model-1 includes PV/Wind Turbine/ and Battery while Model-2 consists of PV/Wind Turbine/Converter and Grid. The yearly energy generated by Model-1 and Model-2 is 57.37 GWh and 81.5 GWh, respectively. The levelized cost of electricity (LCOE) for Model-1 and Model-2 is respectively $0.401/kWh and $0.0347/kWh. It is shown that the simple payback of Model-1 is of 6.70 years, and the simple payback of Model-2 is 7.77 years. Due to the high LCOE of Model-1, its payback year is lesser than model-2. All of these facts indicate that Model 2 is the most optimal solution.

Mandatory fortification of food with the synthetic folic acid (FA) was instituted in 1998 to reduce the incidence of neural tube defects. Adequate folate status is correlated with numerous health benefits. However, elevated consumption of FA is controversially associated with deleterious effects on health. We previously reported that excess FA mimicked folate depletion in a lymphoblastoid cell line. To explore the impact of FA intake from fortified food, we conducted an observational human study on 33 healthy participants aged 18-40 not taking any supplements. Food intake, anthropomorphic measurements, and blood samples were collected and analyzed. Our results show that individuals belonging to the highest tertile of folic acid intake, as well as ones with the highest folic acid to total folate intake ratio (FAR), display a significantly greater incidence of lymphocyte genomic damage. A decrease in global DNA methylation is observed in the highest tertile of FAR compared to the lowest (P=0.055). A downward trend in the overall gene expression of select DNA repair and one carbon cycle genes (MGMT, MLH1, UNG, MTHFR, MTR) is noted with increased folate status and FA intake. These results provide supporting evidence that high consumption of FA from fortified foods can precipitate genomic instability in peripheral lymphocyte in-vivo.

The electromagnetic inference is an issue from decades, where working for a better shielding material is still on-going. The purpose of this study is to review the existing methods in the formation of graphene, metal and polymer-based composites. Study indicates that in graphene and metal-based composites, the utilization of alternating deposition method showed the highest shielding effectiveness, whereas, in polymer-based composite, the utilization of chemical vapor deposition method showed highest shielding effectiveness. However, this review reveals that still there is a gap in the literature in terms of the selection of the method. Although there are various available methods which researchers adopt as per their convenience, none of the studies makes a comparison of the methods to form a similar composite. Therefore, as a future gap researcher needs to adopt various methods to form a single composite and then make a comparison of shielding effectiveness. This act will be useful for future researchers to select the appropriate method.

In this paper we designed system for smart university building based on artificial intelligence (AI) and internet of things (IOT). Our idea can be summarized in smart security system that has different sensors to detect the surrounding environment of the class room in campus which keep everyone and everything on campus safer. By using (IOT), (AI) technologies and applications and by using microcontroller programming we can make the university building safer, secure and more energy saves.

Orchids totalling close to 4000 species in Malaysia are one of the most diverse and most widespread family here had gained momentum in recognition among policy makers and guardians of the forest as one of the profiles that fit and can benefit plant conservation on a broad scale in recent years. Listed not only as conservation indicator but also as priority germplasm for sustainable floriculture industry in the country, a milestone that could safeguard wild orchids from verge of extinction in the natural habitat. Through our 30 years of studying orchids in the wild, we understand more about the distribution, rarity, threats and extinction of orchids than ever before, and we have the scientific tools to address many of the problems, yet many species face daily threats including habitat loss and unsustainable exploitation mainly via Internet trade. Prior to executing workable conservation plan, various research institutions working closely with Forestry Departments in Malaysia to first inventory and document the orchid species richness in the country. Selangor, Sarawak and Perlis Forestry Departments in collaboration with UPM have published seven orchid books that cover various habitat types. Selangor Forestry Department is leading on publishing biodiversity data in form of books for its various ecotourism’s sites and State Parks, and had published two books on orchids. Sarawak state has published one on the limestone orchids, and Perlis is the first to embark on the feat published one in 2010 and currently preparing a new book that includes other flagship wild flowers. Realizing the importance of documenting its biodiversity wealth, Malaysia has developed an information system that would be a one-stop retrieval point or repository for biodiversity facts and as a part of the commitments to CBD to facilitate reporting and the transfer of biological diversity and conservation-related information both nationally and internationally.

In this work, meshless methods are applied for the solution of two-dimensional steady-state heat conduction problems with nonlocal multi-point boundary conditions (NMBC). These meshless procedures are based on multiquadric radial basis function (MQ RBF) and its modified version (i.e. integrated MQ RBF). The proposed meshless methods which were recently published in \cite{Reutskiy2016} is compared with standard collocation method (i.e. Kansa's method). Three different sorts of solution domain are considered in which Dirichlet boundary condition is specified on some part of the boundary and is related to the unknown function values at a discrete set of interior points. The influence of NMBC on the accuracy and condition number of the system matrix associated to the proposed methods is investigated. The sensitivity of the shape parameter is also analyzed in the proposed methods. Performance of the proposed approaches in terms of accuracy and efficiency is confirmed on the benchmark problems.

Wireless Sensor Networks (WSN) are the core of Internet of Things and require cryptographic protection due to the increase number of attacks. Cryptographic methods for WSN should be fast and consume low power as these networks consist of battery-powered devices and constrained microcontrollers. NTRU, the fastest and secure public key cryptosystem, uses high degree polynomials, and is susceptible to the lattice basis reduction attack (LBRA). CPKC, proposed by NTRU authors, works on integers modulo $q$ and is easily attackable by LBRA since it uses small numbers for the sake of the correct decryption. Herein, RCPKC, a random congruential public key cryptosystem working on integers modulo $q$ is proposed, such that the norm of a two-dimensional vector formed by its private key is greater than $\sqrt{q}$. RCPKC works similar to NTRU, and it is a secure version of insecure CPKC. RCPKC specifies a range from which the random numbers shall be selected, and it provides correct decryption for valid users and incorrect decryption for an attacker using LBRA by Gaussian lattice reduction. Because of its resistance to LBRA, RCPKC is more secure. Simultaneously, due to the use of big numbers instead of high degree polynomials, RCPKC is about 24 (7) times faster in encryption (decryption) than NTRU. Also, RCPKC is more three times faster than the most effective known NTRU variant, BQTRU. Compared to NTRU, RCPKC reduces energy consumption at least seven times that allows increasing life-time of unattended WSN more than seven times.

More than 15,000 prescriptions and over the counter drugs are available according to the US Food and Drug Administration website. Moreover, several herbal medicines and dietary supplements are readily available to add to the list of possible drugs, which can potentially cause adverse drug interactions. These are a pressing concern for all as they can interfere with many dental procedures. Additionally, the number of geriatric patients seen in routine dental practice has increased over time. This implies that there are more patients with multiple diseases and health conditions like hypertension, diabetes, problems associated with the cardiovascular, renal and gastrointestinal systems, arthritis, osteoporosis, etc. All these require patients to be on certain medications. Furthermore, advancement in the dental field has led to more complex dental procedures (implants, grafts) being carried out in a general dental practice. These advanced and slightly more invasive treatments require the use of certain drugs before, during and after the treatment like local anesthetics, vasoconstrictors, anxiolytics, analgesics and antibiotics. All of these can possibly interact with medications a patient is already taking and can also interfere with the current dental treatment and create complications. This article aims to provide necessary information about commonly encountered systemic diseases and associated treating medications, their mechanism of action, possible complications and their management. The classes of drugs discussed include anti-platelet agents, vitamin K antagonists, novel oral anticoagulants, bisphosphonates, disease-modifying anti-rheumatic drugs and oral contraceptives.

Computational Fluid Dynamics (CFD) is utilized to study entropy generation for the rarefied steady state laminar 2-D flow of air-Al2O3 nanofluid in square cavity equipped with two solid fins at the hot wall. Such flows are of great importance in industrial applications, such cooling of the electronic equipment’s and nuclear reactors. In the current study, effects of Knudsen number (Kn), Rayleigh number (Ra) and the nano solid particles volume fraction (ϕ) on the entropy generation are investigated. The values of parameters considered in this work are as follows: 0≤Kn≤0.1, 〖10〗^3≤Ra≤〖10〗^6,0≤ϕ≤0.2. Length of the fins (LF) is considered to be fixed and equals to 0.5 m, whereas the location of the fins with respect to the lower wall (HF) is set to 0.25 and 0.75 m. Simulations demonstrate that there is an inverse direct effect of Kn on the entropy generation. Moreover, it is found that when Ra is less than 104, the entropy generation, due to the flow, increases as ϕ increases. In addition, the entropy generation due to the flow will decrease at Ra greater than 104 as ϕ increases. Moreover, the entropy generation due to heat will increase as both the ϕ and Ra increase. In addition, a correlation model of the total entropy generation as a function of all of the investigated parameters in this study is proposed. Finally, an optimization technique is adapted to find out the conditions at which the total entropy generation is minimized

In this investigation magnetic γ-Al2O3 ceramic nanocomposite particles bearing epoxide functionality are prepared following a multistep process. The ultimate nanocomposite particles are named as γ-Al2O3/Fe3O4/SiO2/poly(glycidyl methacrylate (PGMA). The surface property is evaluated by carrying out the adsorption study of Remazol navy (RN), a model reactive azo dye, on both γ-Al2O3/Fe3O4/SiO2 and γ-Al2O3/Fe3O4/SiO2/PGMA nanocomposite particles. The adsorption is carried out at the point of zero charge (PZC) to neutralize the effect of particle surface charge. The adsorption rate is very fast, reached equilibrium (qe) value within five min. Due to mesoporous structure of silica layer γ-Al2O3/Fe3O4/SiO2 nanocomposite particles possessed relatively higher specific surface area and magnitude of adsorption is dependent on the total specific surface area. The introduction of epoxide functionality favored high adsorption capacity in mass per unit surface area. The adsorption process strictly followed Langmuir model. Thermodynamic equilibrium parameters implied that irrespective of surface functionality the adsorption process is spontaneous and exothermic. Pseudo-second-order rate kinetic model is more appropriate to explain the adsorption kinetics.

Logistics Engineering has transcended over the decades into an approach for competitive benefits in organisational performance and logistics efficiency. Most industries are recognising that significant savings are available to companies that are able to ordinate and improve within their logistics operations. Companies today face great challenges because the successful supply of many products and services needs to the effective integration of logistics activities across a prolongation supply chain and an increasing geographical separation. Moreover, logistics integration approach involves both internal integration for an ordinated, unified process as well as relationships to react flexibly, changeability, and responsibility to customer's demands. In this study, by using of Fuzzy Vikor (F-Vikor), the best combination of RIR was selected and RIR Locating was done. The main aim of this paper is survey and design of the integrated operational logistics network (IOLN) and also, a proposed IOLN to integration of the Iran Khodro Co Supply Network.

A B S T R A C T Genital herpes disease is caused mainly by herpes simplex virus type 2 (HSV-2), which is sexually transmitted with a high prevalence in both developed and developing countries. No vaccine is currently available against genital herpes. In this study, we introduced and expressed two genes encoding HSV-2 glycoprotein D (gD) and VP16 protein and a GFP marker gene (control) in tobacco seedlings. Positive plant infection was assessed through characteristic tobacco mosaic virus disease symptoms on leaves and by monitoring the fluorescence emitted by the expressed GFP protein. Expression of the HSV-gD2 and VP16 antigens was verified by RT-PCR, ELISA and Western blot. As a proof of concept, the immunogenicity and the protection ability of the plant produced gD antigen was tested in a mouse model of genital herpes and compared to gD antigen produced in a mammalian expression system. This showed that the plant-gD preparation, when used in combination with a CpG oligodeoxynucleotide as adjuvant, was highly immunogenic and capable of inducing complete immunity to lethal vaginal HSV-2 challenge in mice. Thus, the data presented here may have implications for the development of a production system for highly immunogenic plant-based HSV-2 vaccine antigens.

The rodents of Saudi Arabia consist of 20 species and 12 genera within four families (Gliridae, Dipodidae, Muridae, and Hystricidae). Details on the past and present distribution of the rodents were included along with available data on their habitat preference and biology. The eastern central part of Saudi Arabia covering Tuwiq mountains plateau, including the vicinity of Riyadh, hosts the highest number of rodent species. Analysis of the rodent fauna of Saudi Arabia revealed that they have four major zoogeographical affinities; Palaearctic-Oriental (one species), Afrotropical- Palaearctic (six species), Palaearctic (four species), endemic to Saudi Arabia and Yemen (three species), Afrotropical-Palaearctic-Oriental (three species) and three cosmopolitan species. According to the National Red List, the Euphrates Jerboa, S. euphratica, is listed as Endangered, Near Threatened for the Indian Crested Porcupine, H. indica, three species as Data Deficient, while the rest are considered as Least Concern.

Chronic kidney disease (CKD) bears a heavy burden on patients and the health care system as whole. The incidence of CKD has been increasing in the Arab world over the years due to increases in Diabetes and hypertension which are the most prominent causes of CKD. Syrians are at higher risk for diabetes and hypertension due to the crisis that the country has been going through. 297 patients’ charts were examined in the kidney surgical hospital in Damascus Syria to determine risk factors for CKD, prevalence of diabetes among them and its associating demographic factors along with changes in serum creatinine, urea, fasting blood glucose levels and MDRD score among diabetic CKD patients. 64.6% of patients were above 50, 61.6% were males and 35.4% were diabetic. Patients with diabetes had lower creatinine levels upon admission than non-diabetics. The correlation between fasting blood glucose level and serum creatinine, urea and MDRD was not statistically significant. This paper shows that the prevalence of diabetes among CKD patients is similar in Syrians to the rest of the world despite the increase of diabetes incidence.

The accurate estimation of biomass carbon in forests is of paramount importance for effective forest management and mitigating climate change. This study presents a novel approach to produce a high-resolution map of biomass carbon over forests in Malaysia using the Aboveground Carbon Density Indicator (ACDI) and a comprehensive collection of 12 years of inventory data, i.e., from 2012 to 2023. The ACDI was derived based on several vegetation indices (VIs) that were produced from the original Landsat images to indicate the level of aboveground biomass carbon (AGC) stock in the forested areas. The VIs includes Normalised Difference Vegetation Index (NDVI), Normalised Burn Ratio (NBR), Shadow Index (SI), Soil-Adjusted Vegetation Index (SAVI), Iron Oxide Index (IO), Modified Normalised Difference Water Index (NDWI), and Enhanced Vegetation Index (EVI). The ACDI was then integrated with ground-based measurements, and serves as a robust indicator for estimating AGC. This calculation was conducted on Google Earth Engine (GEE) platform to match the date of field observation with the satellite imagery datasets. The production of seamless mosaic of the latest date of Landsat imagery and the forest type classification were also performed on GEE. The forested areas were classified into three major types, which are dry inland forest, mangrove forest, and peat swamp forest. Results indicated significant spatial variations in AGC across Malaysia's forests. The derived AGC prediction models based on the ACDI varied among the forest types. Based on the estimates, a 30-metre resolution, wall-to-wall map of AGC across the entire forested region of Malaysia has been created. The ACDI was calibrated and validated using a separate validation plots dataset to ensure the accuracy of the AGC estimates. The total AGC in all types of forests in Malaysia was estimated at 3.0 billion Mg C with an attainable accuracy of about 80%. These estimates were also divided into categories and reported to the AGC at the state level. This high-resolution map provides essential information for various stakeholders, with critical implications for carbon sequestration efforts, conservation priorities, and sustainable forest management. The presented methodology not only showcases the value of combining advanced remote sensing techniques with long-term inventory data but also underscores the potential for similar approaches in other tropical forest regions globally. Ultimately, this study contributes to the understanding of carbon dynamics in Malaysian forests and promotes effective strategies for mitigating climate change through better-informed forest conservation and management practices.

Optic neuritis (ON) is the most common cause of vision loss in young adults. It manifests as acute or subacute vision loss, often accompanied by retrobulbar discomfort or pain on eye movements. Typical ON is associated with Multiple Sclerosis and is generally mild and steroid-responsive, whereas atypical forms are characterized by unusual features, such as optic disc edema, poor treatment response and bilateral involvement, and are often associated with autoantibodies against aquaporin-4 (AQP4) and Myelin Oligodendrocyte Glycoprotein (MOG). However, in rare cases AQP4 and MOG antibodies will come back negative, plunging the clinician in a diagnostic conundrum. Seronegative ON warrants a broad differential diagnosis, including autoantibody-associated, granulomatous, and systemic disorders. These rare forms need to be identified promptly, as their management and prognosis is greatly different. The scope of this review is to describe possible, rarer etiologies of ON when AQP4 and MOG antibodies are negative and discuss their diagnosis and treatment.

Pediatric brain tumors are the leading cause of cancer-related death in children. Diagnosis cur-rently relies on surgical biopsy to obtain tumor tissue for histological analysis. There is a great need for less invasive approaches to molecularly profile tumors and monitor therapeutic response. Liquid biopsy analysis of circulating tumor biomarkers in biofluids like cerebrospinal fluid (CSF) and blood offers a promising minimally invasive strategy. This review discusses recent advances in developing liquid biopsy assays using next-generation sequencing, digital PCR, and emerging techniques to detect circulating tumor DNA (ctDNA), cells (CTCs), and exosomes in pediatric brain tumors. The ability to use these circulating biomarkers for non-invasive diagnosis, thera-peutic targeting, tracking response to therapy, and understanding resistance mechanisms is ex-amined. Technical and clinical validation challenges to translate liquid biopsies into routine clin-ical practice are also discussed.

The objective of this research is to conduct a comparative analysis between rectangular-shaped ASTM D3039 specimens with different angles (0°, 15°, and 90°) and various tensile test specimens based on ASTM and ISO standards, all 3D-printed using polyethylene terephthalate glycol (PETG) material through FDM. The study aimed to assesses the weak spot commonly found at the neck of the specimens. Two different printing orientations, namely flat and on-edge, were investigated, and a comprehensive examination and comparison were made regarding the variations in tensile strength, E-modulus, strain, and elongation at break among the tested samples. Additionally, the broken areas was evaluated, and a numerical study utilizing the finite element method (FEM) was conducted to identify stress risers' locations in each specimen type. The experimental results demonstrated that the ASTM D3039-0° specimen exhibited the best tensile properties when printed in the on-edge orientation, while the flat orientation yielded the best results in terms of the broken area. On the other hand, the ISO 527-2 specimens displayed the lowest tensile properties, regardless of the printing orientation. The study highlighted the enhanced tensile properties achieved with the rectangular shape. Specifically, the tensile strength of ASTM D3039-0° was 17.87% and 21% higher than that of the ISO 527 geometry shape for the flat and on-edge orientations, respectively. The numerical analysis indicated that the ISO 527-2 specimen had either no or minimal stress raisers, and the higher stresses observed in the narrow section were isolated from the gripping location.

Background: Our study aimed to assess the differences between domestic and international students in terms of social support, vital exhaustion, and depression during the time of COVID-19. Methods: The online cross-sectional survey was conducted via Google Forms® at three time intervals during the pandemic. Results: Respectively 1320, 246, and 139 students completed our questionnaires in the different time intervals. International students reported significantly lower values of perceived social support. Women reached higher scores regarding vital exhaustion in both samples. Concerning depression, international female students had higher values than their male counterparts but the difference diminished with time. No differences could be found in the comparison of depression between domestic female and male students. Significant correlations were found between depression, perceived social support, and vital exhaustion. Discussion: International students perceive diminished social support just when they need more. Decreased levels of perceived social support may contribute to the development of their psychological problems.

To investigate the dynamics of land surface temperature (LST) in Afghanistan in the period 2000-2021 and to assess the impact of such factors as soil moisture, precipitation, and vegetation coverage on it, remotely sensed soil moisture data from Land Data Assimilation System (FLDAS), precipitation data from Climate Hazards Group Infra-Red Precipitation with Station (CHIRPS), and NDVI and LST from Moderate Resolution Imaging Spectroradiometer (MODIS) were downloaded and correlations between them were analyzed using the regression method. The result shows that the LST in Afghanistan has a slightly decreasing, but insignificant trend during the study period (R=0.2, p-value=0.25), while vegetation coverage, precipitation, and soil moisture had an increasing trend. It was revealed that soil moisture has the highest impact on LST (R=0.7, p-value=0.0007), and the soil moisture, precipitation, and vegetation coverage explain almost 80% of spring (R2=0.73) and summer (R2=0.76) LST variability in Afghanistan. The LST variability analysis done separately for Afghanistan’s rivers subbasins shows that the LST of the Amu Darya subbasin had an upward trend in the study period, while for the Kabul subbasin the trend was downward.

Every petroleum processing industry produces sewage sludge containing several types of poly-cyclic aromatic hydrocarbon (PAHs) components. The degradation of PAH components by physical, biological and chemical methods is not efficient. The use of marine sponge symbiont bacteria is considered an alternative method in the degradation and reduction of PAHs com-pared to the previous method. This study aims to explore the potential and performance of a consortium of sponge symbiont bacteria in degrading anthracene and pyrene. There are three types of bacteria (Bacillus pumilus strain GLB197, Pseudomonas stutzeri strain SLG510A3-8, Acineto-bacter calcoaceticus strain SLCDA 976) were mixed to form a consortium. The interaction between the bacterial consortium suspension and PAH components was measured at 5-day intervals for 25 days. The biodegradation performance of bacteria on PAHs samples was determined based on five biodegradation parameters. The analysis results showed a decrease in the concentration of anthracene (21.89%) and pyrene (7.71%), equivalent to a ratio of 3: 1. The data was followed by a decrease in the abundance of anthracene (60.30%) and pyrene (27.52%), an equivalent ratio of 2: 1. The level of degradation of the pyrene component is lower than that of the anthracene compo-nent, presumably due to the higher toxicity of pyrene and the more stable molecular structure, making it difficult for bacterial cells to destroy it. The biodegradation products are organic compounds of alcohol, aldehyde, carboxylic acids and a small proportion of aromatic hydrocarbon components. Keywords: performance; biodegradation; bacterial consortium; marine sponge; PAHs

This paper presents a multi-year research study conducted at the University of Toledo, aimed at improving human-machine teaming (HMT) methods and technologies. With the incorporation of artificial intelligence (AI) into 21st-century machines, collaboration between humans and machines has become highly complicated for real-time applications. The penetration of intelligent and synthetic assistants (IA/SA) in virtually every field has opened a path for the new area of HMT. When it comes to crucial tasks such as patient treatment and care, defense, and industrial production, the use of non-standardized HMT technologies may pose a risk to human lives as well as up to billions of taxpayer dollars. A thorough literature survey revealed that there are not many established standards or benchmarks for HMT. In this paper, we aim to address the lack of HMT design and development standards. We propose a method to design an HMT based on a generalized architecture. This design includes the development of an intelligent collaborative system and human team. Followed by processes and metrics to test and validate the proposed model, we present a novel human-in-the-loop (HIL) simulation method using two controlled HMT scenarios; first, emergency care provider (ECP) training, and second, patient treatment by an experienced medic. Both scenarios include humans processing visual data and performing actions that represent real-world applications while responding to a Voice-Based Synthetic Assistant (VBSA) as a collaborator that keeps track of actions. As part of these HMT simulation studies, the impact of each parameter related to machines, humans, and HMT (such as errors made by humans and by the VBSA) is presented from the perspective of performance, rules, roles, and operation limitations. In addition, based on the analysis of results from two case studies, we presented guidelines for designing future HMT. Our conclusions indicate that the proposed HIL can be used to perform standardization studies in the pursuit of developing techniques for benchmarking HMT that can be used in critical situations.

Rice wheat cropping system prevailed in more than fifty percent areas of rice belt of central and upper Punjab. In this area yield of wheat is curtailed every year due to late harvesting of rice crop. In addition to this, lack of machinery for direct sowing of wheat into combine harvested rice is a major limitation for timely wheat sowing due to presence of heavy straw load dropped by the combine harvester. A field experiment was planned and executed during two consecutive years 2017-18 and 2018-19 at Agronomic Research Station Farooqabad to evaluate the various stubble management techniques for the sowing of wheat in a rice-wheat cropping system. The Experiment consist of four treatments Happy seeder (Zero tillage), conventional sowing without burning of rice stubble, Rotavator two times, and Conventional sowing with the burning of rice stubble. The trail was arranged as a Randomized Complete Block Design with four replications having a net plot size of 8 m x 20 m. The Treatments have significant effects on Plant height, Number of productive tillers, 1000- grain weight, and grain yield. Maximum plant height (94.74 and 94.25 cm), numbers of productive tillers/m2 (324.00 and 322.25), 1000-grain weight (36.35 and 36.20 g), grain yield (3780 and 3613 kg/ha), and benefit-cost ratio (2.54 and 2.43) were recorded from the treatment happy seeder (Zero tillage) during both years respectively. It is concluded that the sowing of wheat with a happy seeder (Zero tillage) is an appropriate technique in the rice-wheat cropping system by protecting the environment and soil health from the burning of rice stubbles.

Polyhydroxyalkanoate (PHA) co-polymers show relatively higher in vivo degradation rate compared to other PHAs thus they received a great deal of attention for a wide range of medical applications. Nanoparticles (NPs) loaded with poorly water soluble anticancer drug docetaxel (DCX) were produced using poly 3-hydroxybutyrate-co-4-hydroxybutyrate, P(3HB-co-4HB), co-polymers biosynthesised from Cupriavidus sp. USMAA1020 isolated from Malaysian environment. Three co-polymers with different molar proportions of 4-hydroxybutirate (4HB) were used: 16% (PHB16), 30% (PHB30) and 70% (PHB70) 4HB-containing P(3HB-co-4HB). Blank and DCX loaded nanoparticles were then characterized for their size and size distribution, surface charge, encapsulation efficiency and drug release. Pre-formulation studies showed that an optimised formulation could be achieved through the emulsification/solvent evaporation method using PHB70 with the addition of 1.0% PVA, as stabilizer and 0.03% VitE-TPGS, as surfactant. DCX-loaded PHB70 nanoparticles (DCX-PHB70) gave the desired particle size distribution in term of average particles sizes around 150 nm and narrow particle size distribution (PDI below 0.100). The encapsulation efficiencies result showed that at 30% w/w drug-to-polymer ratio: DCX- PHB16 NPs were able to encapsulate up to 42% of DCX; DCX-PHB30 NPs encapsulated up to 46% of DCX and DCX-PHB70 NPs encapsulated up to 50% of DCX within the nanoparticles system. Approximately 60% of DCX was released from the DCX-PHB70 NPs within 7 days for 5%, 10% and 20% of drug to polymer ratio while for the 30% and 40% drug to polymer ratios, an almost complete drug release (98%) after 7 days of incubation was observed.

The provision requirement of 10% openings of the total floor area stated in the Uniform Building by Law 1984 Malaysia has been practiced by designers for building plan submission approval. However, the effectiveness of thermal performance in landed residential buildings, despite the imposition by the by-law, has never been empirically measured and proven. Although terraced houses in Malaysia have dominated 40.9% of the total property transaction in 2019, such mass production with typical designs hardly provides its occupants with thermal comfort due to the static outdoor air condition and lack of external windows, where the conventional ventilation technique does not work well, even for houses with an air well system. Consequently, the occupants need to rely on mechanical cooling, which is a high energy-consuming component contributing to outdoor heat dissipation and therefore urban heat island effect. Thus, encouraging more effective natural ventilation to eliminate excessive heat from the indoor environment is critical. Since most of the research focuses on simulation modelling lacking sufficient empirical validation, this paper drawing on field measurement investigates natural ventilation performance in terraced housing with an air well system. More importantly, the key concern as to what extent the current air well system serving as a ventilator is effective to provide better thermal performance in the single storey terraced house is to be addressed. By adopting an existing single storey air welled terrace house, the existing indoor environmental conditions and thermal performance were monitored and measured using scientific equipment, namely HOBO U12 air temperature and air humidity, the HOBO U12 anemometer and the Delta Ohm HD32.3 Wet Bulb Globe Temperature meter for a six-month duration. The findings show that the air temperature of the air well ranged from 27.48°C to 30.92°C, while the mean relative humidity were from 72.67% to 79.25%. The mean air temperature for a test room (single sided ventilation room) ranged from 28.04°C to 30.92°C with a relative humidity of 70.16% to 76%. These empirical findings are of importance, offering novel policy insights and suggestions to potentially revising the existing building code standard and by laws; since the minimum provision of 10% openings has been revealed to be less effective to provide a desired thermal performance and comfort, mandatory compliance with, and the necessity for, the bylaw requirement should be revisited and further studied.

The hybrid seeds of several important crops with supreme qualities, including yield, biotic and abiotic stress tolerance, have been cultivated from decades. Thus far, a major challenge with hybrid seed, it does not hold ability to produce plants with same qualities over subsequent generations. Apomixis exist naturally an asexual mode of reproduction in flowering plants via avoiding meiosis and ultimately leads to seed production. Apomixis possess potential to preserve hybrid vigor for multiple generations for economically important plant genotypes. The evolution and genetics of asexual seed production is unclear and need much more efforts to find its genetic architecture. To fix hybrid vigor synthetic apomixis has been suggested an alternative. The development of MiMe (Mitosis instead of Meiosis) genotypes are utilized further for clonal gametes production. However, the identification and parental origin of genes responsible for synthetic apomixis are less known and need further understanding. Genome modifications utilizing genome editing technologies (GETs) like clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated protein 9 (cas9) a reverse genetics tool has paved way to utilize emerging technologies in plant molecular biology. From the last decade, several genes in important crops have been successfully edited. The vast availability of GETs has made the functional genomics studies easy to conduct in crops important for food security. The disruption of expression of genes specific to egg cell MATRILINEAL (MTL) or BABY BOOM1 (BBM1) through CRISPR/Cas genome editing system can promote haploid plants. The establishment of synthetic apomixis by engineering MiMe genotype by genome editing BBM1 expression or disruption of MTL leads toward clonal seed production. In present review, we discussed the current development in plants by utilizing CRISPR/Cas9 technology and its possibility of promoting apomixis in crops to preserve hybrid vigour. In addition to this, genetics, evolution, epigenetic modifications and strategy for MiMe genotype development has been discussed in detail.

Nutrients management is a mainspring in agricultural systems for sustained productivity, economy sustainability and environmental quality. Excessive and lesser nutrient application caused environmental pollution and reduced production, respectively impacting socio-economics of the entire ecosystems. Sustainable agricultural production thus demands supplementation of nutrients either through natural processes, application of animal by-products, and mineral fertilizers to crop fields. Technology application for treating useless agricultural wastes into useful source is a management strategy that prevents environment pollution. Crude animal manures triggered soil degradation, attenuation air and water quality, and resulted in higher concentrations of heavy metals. Primary nutrients, i.e., nitrogen, phosphorus and potassium are used globally and are non-renewable. Augmented upsurge in prices of inorganic fertilizers and required discharge restrictions on nutrient has stimulated the technological developments including biochar, composting, vermicomposting, composting with biochar, pyrolysis, forward osmosis, and electro-dialysis to recover nutrients. Therefore, outlining the research gaps considering the present and imminent potential of these technologies for adaptation of nutrient recycling is of great importance. Thus, it’s need of an hour to fix our environment and for that scientists are trying to introduce and renovate the technologies which have immense potential to mitigate the negative effects of technology adversities on our environment.

Penetration of grid connected inverters (GCI) has arisen in power systems due to increasing integration of renewable sources. However, restrictive grid codes require that renewable sources connected to the grid with power electronic systems must be properly connected and appropriate currents must be injected to support stability of the grid under grid faults. Simultaneous injection of symmetrical positive and negative sequence currents is mandatory to support stabilization of grid at the instant of grid faults. Conventional synchronously rotating frame dq current controllers are insufficient under grid faults due to low bandwidth of PI controllers. This paper proposes a new grid current control strategy for grid connected voltage source inverters under unbalanced grid voltage conditions. A proportional current controller with a first order low pass filter disturbance observer (DOb) is proposed which establishes positive sequence power requirements and independently control negative sequence current components under unbalanced voltage conditions. The method does not need any parameter, since it estimates nonlinear terms with low pass filter DOb. Simulations are implemented in Matlab/Simulink platform demonstrating the effectiveness of proposed method.

Frequency, amplitude and phase information of the grid voltage are of great importance in constructing a robust controller structure for grid connected inverter systems. This paper presents a simple and robust approach for the instantaneous estimation of positive and negative sequence voltage components under distorted voltage conditions. A second order generalized integrator (SOGI) is used to filter the distorted voltage and to generate orthogonal voltage components for each of the three phases. These filtered and orthogonal components are used for instantaneous calculation of symmetrical components. The implemented method is frequency adaptive; the method is demonstrated and compared to a conventional phase locked loop (PLL) technique with both MATLAB/Simulink simulations and experiments utilizing the dSPACE ds1103 digital controller.

The goal of the current study is to analyse several nonlinear two-dimensional time-fractional Rosenau Hymanequations. The two-dimensional fractional Rosenau-Hyman equation has extensive use in engineering and applied sciences. The fractional view analysis of two-dimensional time-fractional Rosenau-Hyman equations is discussed using the homotopy perturbation approach, adomian decomposition method, and Yang transformation. Some examples involving two-dimensional time-fractional Rosenau-Hyman equations are provided in order to better understand the suggested approaches. The solutions appear as infinite series. We offer a comparison between the accurate solutions and those that are generated employing the proposed approaches in order to demonstrate the effectiveness and applicability of the proposed techniques. The results are graphically illustrated using 2D and 3D graphs. It has been noted that the obtained results and the targeted problems real solutions are quite similar. Calculated solutions at various fractional levels describe some of the problems useful dynamics. Other fractional problems that arise in other fields of science and engineering can be solved using a modified version of the current techniques.

During the postpartum period, psychological disorders may emerge. Aims and objectives: 1 With the current study, we aim to raise awareness among healthcare professionals about postpartum depression (PPD) in women. To reach the aim we will perform the following tasks: (i) identify biological peripartum risk factors and calculate pooled prevalence of PPD for each of them; (ii) explore the strength of relationship between peripartum risk factors and PPD; (iii) rank the predictors by their prevalence and magnitude of association with PPD. The knowledge obtained will support the development and implementation of early diagnostic and preventive strategies. Methods and analysis: we will systematically go through peer-reviewed publications available in the PubMed search engine and online databases: Scopus, Web of Science, EMBASE. The scope of the review will include articles published any time in English, Arabic, or Polish. We will deduplicate literature sources with the Covidence software, evaluate heterogeneity between the study results, and critically assess credibility of selected articles with the Joanna Briggs Institute’s bias evaluation tool. The information to extract is incidence rate, prevalence, and odds ratio between each risk factor and PPD. A comprehensive analysis of the extracted data will allow us to achive the objectives. The study findings will contribute to risk stratification and more effective management of PPD in women.

Cancer have been known as a most important global mortality reason, which in spite of novel therapeutic ways, the leading death is still considerable. Molecular targeted diagnosis and therapy using aptamers with high affinity have converted to a popular technique for pathological angiogenesis and cancer therapy scientists. In this paper several aptamer-based diagnostic and therapeutic techniques such as aptamer-nanomaterial conjugation, aptamer-drug conjugation (physically or covalently) and biosensors, which successfully designed for biomarkers, are critically reviewed. The results obviously demonstrated that aptamer have potentially incorporated with targeted delivery systems and biosensors for detection of biomarkers which expressed by cancer cells. Aptamer-based therapeutic and diagnostic methods, as the main field of medical sciences, possess high potential in cancer therapy, pathological angiogenesis and increase of community health. The clinical use of aptamer is so limited due to unreliability resulted from targets impurities, inaccuracy in SELEX stages process, and in vitro synthesis which led to the lower selectivity for in vivo targets. Moreover, size behavior, probable toxicity, low-distribution and unpredictable behavior of nanomaterials in in vivo media make critical their usage in clinical assays. This review can be helpful for implementation and designing the future studies which are effective and applicable for clinical use.

It is a challenging problem that air-written Arabic letters has received a lot of attention in the past decades when compared to commonly spoken languages like English languages. To fill this gap, we propose a strong model that brings together machine learning (ML) and optical character recognition (OCR) methods. The model applied several ML methods, (i.e., Neural Networks (NN), Random Forest (RF), K-Nearest Neighbors (KNN), and Support Vector Machine (SVM), with deep convolutional neural networks (CNNs) such as VGG16, VGG19, and SqueezeNet for effective feature extraction. Our study utilizes the AHAWP dataset, which consists of varied writing styles and variations in hand signs, to train and evaluate the model. Preprocessing systems are applied to improve data quality by reduction bias. Besides, OCR methods are combined into our model to sequestrate individual letters from continuous air-written gestures and refine recognition results. Results of this study show that the proposed model has achieved the extreme accuracy of 88.8% using NN with VGG16. This study presents an inclusive approach that combines ML, deep CNNs, and OCR methods to address the issue of Arabic in air writing recognition research.

Hate Speech Detection in Arabic presents a multifaceted challenge due to the broad and diverse linguistic terrain. With its multiple dialects and rich cultural subtleties, Arabic requires particular measures to address hate speech online successfully. To address this issue, academics and developers have used natural language processing (NLP) methods and machine learning algorithms adapted to the complexities of Arabic text. However, many proposed methods were hampered by a lack of a comprehensive dataset/corpus of Arabic hate speech. In this research, we propose a novel multi-class public Arabic dataset comprised of 403,688 annotated tweets categorized as extremely positive, positive, neutral, or negative based on the presence of hate speech. Using our developed dataset, we additionally characterize the performance of multiple machine learning models for Hate speech identification in Arabic Jordanian dialect tweets. Specifically, the Word2Vec, TF-IDF, and AraBert text representation models have been applied to produce word vectors. With the help of these models, we can provide classification models with vectors representing text. After that, seven Machine learning classifiers have been evaluated: Support Vector Machine (SVM), Logistic Regression (LR), Naive Bays (NB), Random Forest (RF), AdaBoost (Ada), XGBoost (XGB), and CatBoost (CatB). In light of this, the experimental evaluation revealed that, in this challenging and unstructured setting, our gathered and annotated datasets were rather efficient and generated encouraging assessment outcomes. This will enable academics to delve further into this crucial field of study.

Background: The ever-growing emergence of antibiotic resistance associated with tuberculosis (TB) has become a global challenge. In 2012, USFDA has given expedited approval to bedaquiline (BDQ), as a new treatment for drug-resistant TB in adults when no other viable options are available. BDQ is a diarylquinoline derivative and exhibits targeted action on mycobacterium tuberculosis but due to poor solubility desired therapeutic action is not achieved. Objective: To develop a QbD-based self-nanoemulsifying drug delivery system of Bedaquiline using various oils, surfactants, and co-surfactants. Methods: The quality target product profile (QTPP) and critical quality attributes (CQAs) were identified with a patient-centric approach which facilitated the selection of critical material attributes (CMAs) during pre-formulation studies and initial risk assessment. Caprylic acid as a lipid, propylene glycol as a surfactant and Transcutol-P as a co-surfactant were selected as CMAs for the formulation of Bedaquiline fumarate SNEDDS. Pseudo-ternary phase diagrams were constructed to determine the optimal ratio of oil and Smix. To optimize the formulation, a Box-Benkhen design (BBD) was used. The optimized formulation (BDQ-F-SNEDSS) was further evaluated for parameters such as droplet size, polydispersity index (PDI), percentage transmittance, dilution studies, stability studies, and cell toxicity through the A549 cell. Results: Optimized BDQ-F-SNEDDS showed well-formed droplets of 98.88±2.1 nm with a zeta potential of 21.16 mV. In vitro, studies showed enhanced drug release with a high degree of stability at 25 ± 2 ºC & 60 ± 5 % and 40 ± 2 ºC & 75± 5 %. Furthermore, BDQ-F-SNEDDS showed promising cell viability in A549 cells indicating BDQ-F-SNEDDS as a safer formulation for oral delivery. Conclusion: Finally, it was concluded that the utilization of a QbD approach in the development of BDQ-F-loaded SNEDDS offers a promising strategy to improve the biopharmaceutical properties of the drug, resulting in potential cost and time savings.

(1) Background: Colon cancer is one of the leading causes of cancer morbidity and mortality globally. It is a multi-step process that involves genetic and epigenetic modifications leading to histological and morphological changes. Several complementary therapeutic options have been analyzed, shedding light on plant-based medication as a potential treatment for colon cancer. Flavonoids such as quercetin are known to have anti-cancer and anti-inflammatory properties. This in vitro study examines quercetin's anti-inflammatory, anti-apoptotic, anti-angiogenesis effects and antioxidant properties in colon cancer cells. (2) Methods: The antioxidant capacity of quercetin-treated cells was investigated using biochemical assays, and angiogenesis and cytokine levels were assessed using enzyme-linked immunosorbent assay (ELISA). The epigenetic modulation and differential expression of aging, apoptotic, and proliferation genes, and Histone deacetylases (HDACs) were also investigated. (3) Results: In this study, the quercetin-treated group significantly reduced the antioxidant enzymes, cytokines, and VEGF levels, altering the expression of epigenetic factors. Quercetin also induced significant senescence in colon cancer cells. Moreover, a considerable increase was observed in the apoptotic and hTERT genes. In contrast, a decrease in p53, proliferation genes, and HDACs was observed, providing a basis for the clinical use of quercetin in cancer treatment. (4) Conclusion: In vitro studies showed that quercetin treatment efficiently induces senescence and apoptosis in colon cancer cells. We also found that quercetin effectively modulated the expression of p53, Wnt1, CTNNB1, and HDACs, indicating that it could be used to treat colon cancer.

(1) Methadone is a chiral synthetic opioid primarily used to treat heroin and prescription-opioid addiction: the (R)-enantiomer (Levomethadone) activates the µ-opioid receptor more potently than the (S)-enantiomer, which is a more potent blocker of the hERG potassium channels, resulting in QTc prolongation. The purpose of this study is to assess the effect of methadone on the QTc interval and to investigate the benefits of Levomethadone. (2) The electrocardiograms of 165 patients taking methadone at various dosages and for different periods of time were examined: the QTc value was manually measured and then adjusted using Bazett's formula. (3) Data analysis revealed a linear association between the dosage of methadone and QTc length; no correlation was found between the QTc value and gender, age, or duration of therapy. 14% of the sample (23 patients) showed a prolongation of the QTc interval. 10 of the 23 patients with QTc elongation underwent a change of therapy from Methadone to Levomethadone: in 90% of these patients, a normalization in the QTc length was established. (4) This study confirmed the role of methadone, specifically its dosage, in QTc prolongation and the efficiency of Levomethadone as an adequate therapeutic substitute in these circumstances. This study validates the importance of a careful electrocardiographic monitoring in methadone-treated patients.

Background: Low-level (LLLT) and high-intensity laser therapy (HILT) can be beneficial additions to knee osteoarthritis (KOA) rehabilitation exercises; however, it is still being determined which modality is more effective. Aim: To compare the effects of LLLT and HILT as adjuncts to rehabilitation exercise (LL+EX and HL+EX) on clinical outcomes in KOA. Methods: Thirty-four adults with mild to moderate KOA were randomly allocated to either LL+EX (n = 17) or HL+EX (n = 17) groups. All participants underwent their designated laser treatment combined with rehabilitation exercises weekly for twelve consecutive weeks. The Knee Injury and Osteoarthritis Outcome Score (KOOS), Numerical Pain Rating Scale (NPRS), active knee flexion, and Timed Up-and-Go test (TUG) were assessed at baseline and immediately post-intervention. Results: Post-intervention, both groups significantly improved their KOOS, NPRS, active knee flexion, and TUG scores compared to baseline (p &lt; 0.01). The mean difference of change in KOOS, NPRS, and active knee flexion scores for the HL+EX group surpassed the minimal clinically important difference threshold. In contrast, the LL+EX group only demonstrated clinical significance in NPRS scores. Conclusions: Incorporating HILT as an adjunct to usual KOA rehabilitation led to significantly higher improvements in pain, physical function, and knee-related disability compared to LLLT.

Statistical modeling of lifetime data plays an essential role in a wide range of practical fields, such as health and engineering. There have been a lot of studies done to develop statistical models that can better describe health data than traditional models. For the first time, we pioneer a novel family of continuous probability distributions called the generalized odd beta prime generalized (GOBP-G) family of distributions. The cumulative distribution and probability density functions of the new family are presented. A new generalization of the Weibull distribution called "generalized odd beta prime-Weibull" (GOBPW) is proposed using the pioneered GOBP-G family. The mixture representations of the new distribution are defined and derived. Some formal statistical properties of the GOBPW distribution, such as the moments, moment generating function, incomplete moments, information generating function, entropies, stress-strength function, quantile function, and order statistics, are derived. The estimation of the parameters of the proposed distribution is evaluated using the maximum likelihood estimation approach. Different cancer disease data sets, such as the bladder, head and neck, acute bone, and blood cancers, are used to illustrate the applicability and usefulness of the new model and were compared using several statistical accuracy measures with that of well-established extended Weibull distributions, which are the beta modified Weibull distribution, Kumaraswamy modified Weibull distribution, gamma generalized modified Weibull distribution, gamma log-logistic Weibull distribution, and beta log-logistic Weibull distribution. The results show that the proposed model gives better results than the competitive models. This study could guide the relevant stakeholders in choosing a suitable statistical model for the health data instead of relying on traditional models to enhance decision-making.

Impervious surface area (ISA) is a crucial indicator for quantitative urban studies. It is also important for land use land cover classification, groundwater recharge, sustainable development, urban heat island effects, and more. Spectral ISA mapping suffers from mixed pixel problems, especially with bare soil. This study aims to develop an ISA index for spatiotemporal urban mapping from common multispectral bands by reducing soil signature better than in previous studies. This study proposed a global impervious surface area index (GISAI) enhancing ISA mapping accuracy using a temporal parameter of the remote sensing (RS) dataset. Bare soil spectral reflectance shows more fluctuation than urban ISA. Therefore, the study uses minimum composites of earlier urban indices to compile minimum soil signature. It is later improved by removing water, increasing the contrast between bare soil and urban ISA and reducing bright bare soil area. This study maps the ISA of all 12 megacities using the annual RS image collection from 2021. GISAI reduced the bare soil signature and achieved an overall accuracy of 87.29%, F1-score of 0.84, and Kappa coefficient of 0.75. However, it has some limitations with grey bare soil and barren hilly areas. By limiting bare soil signature, GISAI broadens the scope of inter-urban studies globally and lengthens potential urban time-series analysis using common multispectral bands.

Abstract: Carbohydrates form the major source of energy in Asian diets. A lower carbohydrate diet became the recommended golden standard for healthy lifestyle. However, the effects of low-carbohydrates diet on health in apparently healthy individuals have been poorly studied, especially in relation to insulin resistance syndrome (IRS). A total of 120 healthy weight participants with no previous history of a major medical condition and an average BMI of ≤ 25kg/m2 were recruited. Self-reported dietary intake and objective physical activity by accelerometry were tracked for seven days. Participants were divided into three categories according to their dietary intake of carbohydrates. Blood samples were collected for metabolic markers analysis. HOMA of insulin resistance (HOMA-IR), β-cell function (HOMA-B) and C-peptide were used to evaluate glucose homeostasis. The consumption of low carbohydrates (less than 45% of total energy) significantly correlated with higher HOMA-IR, Lower HOMA-β % compared to moderate carbohydrate intake (between 45% to 65%). However, only the HOMA-β % was significantly influenced by carbohydrates intake. Moreover, low carbohydrates intake was significantly associated with elevated C-peptide secretion. The substitution of carbohydrates with other macronutrients, such as fat and proteins in the Atkins/ketogenic diet, resulted in a pronounced induction of IRS-related inflammatory markers; FGF2, IP-10, IL-6, IL-17A, MDC and reduction of IL-13. Overall, the presented data highlight, for the first time, that low carbohydrate intake results in significant glucose homeostasis imbalance that may be driven by a heightened state of inflammatory response.

Insects quickly develop resistance to conventional chemical insecticides. The use of silica nanoparticles (SiO₂NPs) is a promising new approach for managing insect pests. The insects that have been studied are, in most cases, external feeders and internal leaf feeders have not been well studied. Here, we investigate the efficiency of SiO₂NPs in controlling the American serpentine leafminer Liriomyza trifolii (Diptera: Agromyzidae), a devastating insect pest of a wide range of crops. SiO₂NPs at concentrations of 50, 100, 200 and 400 mg/L compared to a control of distilled water were applied to intact Phaseolus vulgaris leaves by spraying to evaluate their effects, via the plant, on the number, survival, developmental/feeding speed, body mass/size and sex ratio of L. trifolii released after spraying. A qRT-PCR analysis was conducted to assess oxidative stress in L. trifolii based on the gene expression level of the two major antioxidant enzymes; catalase and superoxide dismutase. The number of mines, survival rate and puparia weight were lower than the control at the highest concentration of SiO₂NPs, while pupariation was delayed at most of the concentrations studied and puparium weight/size decreased at low concentrations. Sex ratio was not affected by SiO₂NPs. Gene expression levels of the antioxidant enzymes at the pupal stage were not significantly affected by SiO₂NPs at any concentration but some individuals showed up-regulation at low SiO₂NP concentrations, inferring development of resistance. This study demonstrated that a priori application of the highest concentration of SiO₂NPs to plants effectively reduces a leafminer population but that application of even the lowest concentration can decrease the life history trait values of surviving leafminers.

Lung cancer is a deadly disease if not diagnosed in its early stages. However, early detection of lung cancer is a challenging task due to the shape and size of its nodules. Radiologists need support from automated tools for precise opinion. Automated detection of the affected lungs nodule is difficult because of the shape similarity among healthy tissues. Over the years, several expert systems have been developed that help radiologists to diagnose lung cancer. In this article, we propose a framework to precisely detect lungs cancer by classifying it between benign and malignant nodules. The framework is tested using the subset of the publicly available at the Lung Image Database Consortium image collection (LIDC-IDRI). Multiple techniques including filtering and noise removing are applied for pre-processing. Subsequently, the OTSU and the semantic segmentation are used to accurately detect the unhealthy lungs nodules. In total, 13 nodules features were extracted using Principal Components Analysis (PCA) algorithm. Four optimal features are selected based on the classification performance. In the classification phase, 9 different classifiers are used along with two types of validation schemes i.e. train test holdout validation with 70-30 data split and 10 fold cross-validation. Our experiments show that the proposed system provides 99.23\% accuracy using logic boost classifier.

A practical wind farm controller for production maximisation based on coordinated control is presented. The farm controller emphasises computational efficiency without compromising accuracy. The controller combines Particle Swarm Optimisation (PSO) with a turbulence intensity based Jensen wake model (TI-JM) for exploiting the benefits of either curtailing upstream turbines using coefficient of power ($C_P$) or deflecting wakes by applying yaw-offsets for maximising net farm production. First, TI-JM is evaluated using convention control benchmarking WindPRO and real time SCADA data from three operating wind farms. Then the optimized strategies are evaluated using simulations based on TI-JM and PSO. The innovative control strategies can optimise a medium size wind farm, Lillgrund consisting of 48 wind turbines, requiring less than 50 seconds for a single simulation, increasing farm efficiency up to a maximum of 6% in full wake conditions.

This study concentrates on assessing the insecticidal attributes of γ-Al2O3 nanoparticles derived from remnants of Mentha pulegium, which include essential oil, ethanolic extract, and plant waste. The synthesis of γ-Al2O3 nanoparticles was executed via a direct sol-gel procedure, affirming the crystal structure through extensive physicochemical analyses such as UV-VIS, XRD, FTIR, and SEM. The evaluation of insecticidal activity in vitro was conducted against Xylosandrus crassiusculus, a pest that infests carob wood, utilizing strains from diverse forests in the Khenifra region, situated in the Moroccan Middle Atlas. The lethal doses 50 ranged from 40 mg/g to 68 mg/g, indicating moderate effectiveness compared to the commercial insecticide Permethrin. The optimization of the conditions for the efficiency of γ-Al2O3 nanoparticles was determined by experimental plans, revealing that time, humidity, and temperature were influential factors in the lethal dose 50 of these nanomaterials. Moreover, this study encompasses the establishment of correlations through Principal Component Analysis (PCA) and Ascending Hierarchical Classification (AHC) among various geographic, biological, and physical data, amalgamating geographic altitude, γ-Al2O3 nanoparticle insecticide parameters, as well as the attributes of mechanical tests conducted on carob wood affected by insects. The correlation highlights a close connection between the effectiveness of the insecticide, mountain altitude, and the mechanical parameters that were examined. Ultimately, these nanoparticles demonstrate promising potential as alternative insecticides, thus opening encouraging prospects for safeguarding against carob wood pests.

In recent years, Nigeria is witnessing increasing frequency of flood occurrence with devastating impact translating into significant loss of lives (in Nigeria, over 300 people died in September 2022) and properties. Addressing flood disaster requires holistic approach from policy and governance perspectives, integration of policies and programs and synergies between institutions. Using synergies and eliminating trade-offs, flood governance and policy coherence integrate all relevant policy fields and institutions to achieve common policy outcomes. The objective of this study is to examine and understand how flood governance and policy coherence are approached, as well as institutional design and implementation for coherence in Nigeria. The findings revealed that there is no single flood policy in Nigeria. Due to this, there is no focus and no defined objectives for flood governance, prevention, control, and management, and no imperative for the government to seek both short-term and long-term flood solutions. There is no synergy and coordination among institutions for flood governance in the country. Since the country established the federal ministry of environment in 1999, the environment, floods, and climate-related hazards were given less priority. State and local governments handle most flood disasters and emergencies. Federal assistance is provided, however, when flood disasters exceed the capabilities of local and state governments. This study recommends that across the country, flood policy needs to be designed, formulated, and implemented while assigning governance responsibility and decentralizing policy to state and local governments.

The oil and gas sector has recognised structural integrity assessment of ageing platform for prospective life extension as a rising concern, particularly in encountering the randomness of the harsh ocean environments. This condition leads to uncertainty in wave-in-deck load estimates and a high load level being imposed on offshore structures. This emphasises the necessity of enhanced reliability, as failure might result in inaccessibility because of the uncertainties related to long-distance services, such as accuracy of predictions of loads and responses. Even though the established guidelines present a fundamental assessment, additionally, comprehensive rules are required. This paper performed a reliability analysis incorporating practical approaches that can more accurately represent time-dependent structural deterioration. The following two procedures have been adopted by a majority of significant oil and gas operators to monitor the safety and integrity of these structures: a) Ultimate Strength Assessment (USA) method and b) Reliability Design Assessment (ReDA) method. A comparison of these two reliability approaches was performed on selected ageing jacket structures in the region of the Malaysian sea. The comparative findings, namely, reserve strength ratio (RSR) at various years of the return period (RP) and ratio value for risk of failure regarding the probability of failure (POF), provided a check and balance in strengthening confidence in the results. The findings showed that the structural components might safely survive either using the USA and ReDA method in such conditions, as the reliability indexes were determined to be satisfactory compared to allowable values from ISO 19902 design specifications. Therefore, these evaluations were determined to control the risk level of the structure during the remaining of its lifetime and undertake cost-effective inspections or mitigation strategies when necessary.

Guava is a vital fruit worldwide, especially in Pakistan, and due to its nutritional value famous in each age group. Due to a very short shelf life, the marketing and export of this fruit faced severe constraints. Therefore, in the current study, edible coating of chitosan (0, 0.5, 1.0, 1.5, and 2.0%) was evaluated on postharvest shelf life when guava fruits were stored (room temperature and 4 °C temperatures) for 12 days. The chitosan treated coating fruits have shown reduced total sugars and malondialdehyde levels compared to untreated control samples. However, a significant difference (p ≤ 0.05) in total sugar and malondialdehyde levels exists between samples stored in m compared to refrigerated temperature (4 °C). The chitosan-coated samples have shown a greater amount of vitamin C, quercetin, rutin, and total phenolic contents than control samples. However, these nutritional parameters' levels were significantly different (p ≤ 0.05) in samples stored at room than samples stored at refrigerated temperature. However, the levels of crude fiber, potassium, and sodium were found statistically nonsignificant (p ≥0.05) in control versus chitosan treated coating treatments. The findings have documented that the coatings of 1.5 and 2.0% were most effective for extension in shelf life and maintaining the nutritional attributes of guava fruit.

RLF-100 (Aviptadil), a synthetic form of Vasoactive Intestinal Peptide (VIP) is shown to block replication of the SARS-CoV-2 virus and has been granted Fast Track Designation by the US FDA for the treatment of Critical COVID-19 with Respiratory Failure. We describe the clinical course of the first patient treated with this investigational medication in an open label manner -- a 54 year old patient suffering antibody-mediated rejection of his double lung transplant who contracted COVID-19 with respiratory failure refractory to all currently available therapies. He received three infusions of RLF-100 under an FDA-approved emergency use IND. Within 24 hours of the third infusion, substantial improvement in oxygen saturation and radiographic improvement in characteristic COVID-19 pneumonitis was noted. He was discharged from intensive care at that point and scheduled for discharge to home at 1 week on room air. Despite an intervening hospitalization for trauma, he remains alive and free of respiratory failure at 28 days post treatment.

The current study emphasizes on optimizing a suitable ratio of enzymatically hydrolyzed potato powder (EHPP) and whole milk powder (WMP) to produce a quality yogurt by evaluating the physicochemical and rheological properties. The results showed that the addition of EHPP decreased the pH towards acidic conditions which resulted in the high acidity of yoghurt. The proximate composition showed that EHPP increased the ash, protein, water holding capacity (WHC) while fat, synersis, color parameters and total solid were decreased when compared to control yoghurt (CY) sample. Moreover, texture profile (TPA) analysis showed that the addition of EHPP decreased the hardness and cohesiveness while springiness did not show significant difference. Furthermore, rheological properties revealed that EHPP decreased the storage modulus (G’) and loss modulus (G”) when compared with control. In addition to this, sensory analysis revealed that the treatment P4M (1:3) was found as optimum ratio regarding taste, flavor, and aroma. Besides this, scanning electron microscopy (SEM) confirms that the high amount of EHPP resulted in the void holes while CY showed dense gel structure. The prepared yogurt with EHPP provides an excellent flavor, satisfying sweetness and homogeneous texture. These findings suggest the optimum formulation ratio of prepared yogurt was found to be P4M (1:3) for desirable attributes and consumer acceptance. The prepared yogurt from the EHPP presents the potential industrial applications.

The Middle East spans the transition between temperate Mediterranean climate in the Levant to hyper-arid sub-tropical deserts in the southern part of the Arabian Peninsula, with the complex alpine topography in the northeast feeding the Euphrates and Tigris rivers which support life in the southeastern Fertile Crescent (FC). Climate projections predict severe drying in major parts much of the ME in response to global warming, making it important to understand the controls of hydro-climate perturbations in the region. Here we discuss 23 ME speleothem stable oxygen isotope (δ¹⁸Occ) records from 16 sites from the SISAL_v1 database, which provide a record of past hydro-climatic variability. Sub-millennial changes in ME speleothem δ¹⁸Occ values primarily indicate changes in past precipitation amounts superimposed on variations of the main synoptic pattern in the region, specifically Mediterranean cyclones. The coherency (or lack thereof) between regional records is reviewed from Pleistocene to present, covering the Last Glacial Maximum (LGM), prominent events during deglaciation, and transition into the Holocene. The available speleothem δ¹⁸Occ time-series are investigated by binning and normalizing at 25-year and 200-year time windows over the Holocene. Important Holocene climatic oscillations are discussed, such as the 8.2 ka, 4.2 ka and 0.7 ka (the Little Ice Age) Before Present events. Common trends in the standardized anomalies are tested against different climate archives. Finally, recommendations for future speleothem-based research in the region are given along with comments on the utility and completeness of the SISAL database.

New class of biologically active and non-active compounds can be synthesized via transition metal mediated Suzuki cross coupling reaction that has a great impact on the advancement of organic chemistry. These resulted products can lend a helping hand in pharmaceutical and polymer chemistry for the betterment of mankind. Suzuki-Miyaura cross coupling reaction is one of the best tools through which many natural and non-natural compounds can be synthesized.

Rebar cages form the skeletal framework of reinforced concrete structural members. They comprise longitudinal and transverse reinforcing bars, usually connected by tie wires. Past studies have identified tie-wire connections as the "weak links" in large, prefabricated rebar cages, leading to their failure during site handling and construction stages. Recent research has explored the use of mechanical U-bolt connectors to bolster stability and safety of rebar cages while reducing their vulnerability and risk of failure. This paper presents a comprehensive experimental and numerical investigation of a new type of mechanical connector, referred to as "Cage Clamp", to enhance rebar cage stability and safety. Component-level experimental tests are conducted to determine the force-displacement response of Cage Clamp connectors for crossbar connections in different degrees of freedom. The results highlight the remarkable strength and stiffness of Cage Clamp connectors, significantly outperforming traditional tie-wire connections. Furthermore, full-scale experimental tests are performed on a circular underground pile-shaft rebar cage with Cage Clamp connectors to assess its behavior under various site handling conditions. The data obtained from these experiments are used to construct and refine detailed 3D finite element models of the rebar cages, capable of capturing the complex behavior of rebar cages with Cage Clamp connectors. Using the numerical model, a sensitivity analysis is performed to assess the effect of the number of Cage Clamps on the deflection and stability of the rebar cage. The findings show that using cage clamps to connect pick-up rebar with lateral reinforcement at every 8 to 10 feet is sufficient to ensure the stability of the cage during typical site handling conditions. The results of this study serve as a basis for establishing analysis, design, fabrication, and handling guidelines for rebar cages, contributing to safe and efficient construction practices.

In the past few decades, the transmission of data over an unsecure channel resulted in an increased rate of hacking. Therefore, the requirement to make multimedia data more secure is increasing day by day. Numerous algorithms are developed to improve efficiency and robustness. In this article, a novel and secure image encryption algorithm is presented. It is based on a modified chaotic logistic map (CLM) that provides the advantage of having less computational time to encrypt an input image. The encryption algorithm is based on Shannon’s idea of using substitution-permutation and one-time-pad network to achieve ideal secrecy. The CLM is used for substitution and permutation to improve randomness and increase dependency on the encryption key. Various statistical tests are conducted, such as Key Space Analysis, Complexity Analysis, Sensitivity Analysis, Strict Avalanche Criteria (SAC), Histogram Analysis, Entropy Analysis, Mean of Absolute Deviation (MAD) Analysis, Correlation Analysis, Contrast Analysis, and Homogeneity to give a comparative analysis of the proposed algorithm and verify its security. As a result of various statistical tests, it is evident that the proposed algorithm is more efficient and robust as compared to previous ones.

Cannabis, renowned for its historical medicinal use, harbours various bioactive compounds—cannabinoids, terpenes, and flavonoids. While major cannabinoids like THC and CBD have received extensive scrutiny for their pharmacological properties, emerging evidence underscores the collaborative interactions among these constituents, suggesting a collective therapeutic potential. This comprehensive review explores the intricate relationships and synergies between cannabinoids, terpenes, and flavonoids in cannabis. Cannabinoids, pivotal in cannabis's bioactivity, exhibit well-documented analgesic, anti-inflammatory, and neuroprotective effects. Terpenes, aromatic compounds imbuing distinct flavours, not only contribute to cannabis's sensory profile but also modulate cannabinoid effects through diverse molecular mechanisms. Flavonoids, another cannabis component, demonstrate anti-inflammatory, antioxidant, and neuroprotective properties, particularly relevant to neuroinflammation. The entourage hypothesis posits that combined cannabinoid, terpene, and flavonoid action yields synergistic or additive effects, surpassing individual compound efficacy. Recognizing the nuanced interactions is crucial for unravelling cannabis's complete therapeutic potential. Tailoring treatments based on the holistic composition of cannabis strains allows optimization of therapeutic outcomes while minimizing potential side effects. This review underscores the imperative to delve into the intricate roles of cannabinoids, terpenes, and flavonoids, offering promising prospects for innovative therapeutic interventions and advocating continued research to unlock cannabis's full therapeutic potential within the realm of natural plant-based medicine.