Climate change and global warming are becoming important problems around the globe. To prevent these environmental problems, many countries try to reduce the emissions of greenhouse gases (GHG) and manage the consumption of energy. In Korea, Korea Electric Power Corporation (KEPCO) has introduced Smart Grid (SG) technologies to its branch office in 2014. This was the first demonstration of smart grid on a building called Smart Grid Station. This paper treats the achievements of the Smart Grid Station (SGS) by its early target in three aspects. The things are peak reduction, power consumption reduction and electricity fee saving. The authors analyzed the achievements by comparing the data of 2015 with the data of 2014. Through the evaluation, the authors studied the case, proved the advantages of SGS, and suggested the requirements to improve and the direction to go of the system.

While the Internet of Things (IoT) technology has been widely recognized as the essential part of Smart Cities, it also brings new challenges in terms of privacy and security. Access control (AC) is among the top security concerns, which is critical in resource and information protection over IoT devices. Traditional access control approaches, like Access Control Lists (ACL), Role-based Access Control (RBAC) and Attribute-based Access Control (ABAC), are not able to provide a scalable, manageable and efficient mechanism to meet the requirements of IoT systems. Another weakness in today's AC is the centralized authorization server, which can be the performance bottleneck or the single point of failure. Inspired by the smart contract on top of a blockchain protocol, this paper proposes BlendCAC, which is a decentralized, federated capability-based AC mechanism to enable an effective protection for devices, services and information in large scale IoT systems. A federated capability-based delegation model (FCDM) is introduced to support hierarchical and multi-hop delegation. The mechanism for delegate authorization and revocation is explored. A robust identity-based capability token management strategy is proposed, which takes advantage of the smart contract for registering, propagating and revocating of the access authorization. A proof-of-concept prototype has been implemented on both resources-constrained devices (i.e., Raspberry PI node) and more powerful computing devices (i.e., laptops), and tested on a local private blockchain network. The experimental results demonstrate the feasibility of the BlendCAC to offer a decentralized, scalable, lightweight and fine-grained AC solution for IoT systems.

This study provides an evaluation of a web-based platform for game management and sales, developed using PHP, MySQL, and SASS. The development process utilized the SCRUM methodology, concentrating on essential modules such as user management, game catalog, payment processing, and technical support. The platform's performance was assessed using Google's Lighthouse tool, which evaluates four critical areas: performance, accessibility, best practices, and SEO. The results demonstrated exceptional performance with a score of 99/100 and perfect adherence to best practices with a score of 100/100, reflecting high efficiency and compliance with web development standards. Accessibility received a score of 83/100, indicating potential areas for improvement, while SEO achieved a score of 91/100, suggesting effective search engine optimization. The findings reveal that the platform exhibits high levels of optimization and operational efficiency. However, there remains an opportunity to enhance accessibility features. This study highlights the significance of rigorous web development practices and optimization efforts in achieving superior performance and user experience in web-based systems.

Studies on social media (SM) and disaster management (DM) have mainly focused on the adap-tation, application and use of SM in each stage of DM. With the widespread availability and use of SM, the effective utilisation of SM in DM is impeded by various challenges, but not yet com-prehensively researched. Therefore, this paper aims to identify the challenges, as well as the strategies to overcome the challenges and categorises them into a classified model. The study adopts a systematic literature review to present and analyse the challenges and strategies for us-ing SM in DM. Utilising prominent databases, 72 publications were carefully selected and ana-lysed qualitatively using content analysis. The findings revealed four key challenges to its users: spread of misinformation; insufficient human resources to manage SM use; lack of trust in infor-mation and authorities; and, poor information quality and content of messages. The study identi-fied several strategies to overcome challenges, which can be classified into three sectors of the SM community: individuals, organisations, and SM companies. These findings contribute to enhanc-ing the effective utilisation of SM in DM by community practitioners. Furthermore, this study provides insight into the current status of knowledge and identifies the research gaps around SM in DM for future research.

SUDEP is a sudden death in a person with epilepsy, without evidence of a seizure before death. While its cause is still unclear, various factors have been linked to seizure onset and cardiopulmonary function. Studies have shown that although 91.3% of epilepsy patients want information on premature death, only 31% of them receive it. The numbers emphasize the need for open and sensitive communication by medical professionals. It is important to choose the appropriate moment for the conversation, avoiding periods of stress and ensuring emotional stability in the patient, as well as clear, appropriate and easy to comprehend information about SUDEP. To facilitate this, knowing the patient's level of knowledge is essential. Education on the warning signs of seizures and SUDEP can help take precautions and can decrease the incidence of the phenomenon itself. Effective epilepsy care requires a comprehensive plan, including medication adherence and lifestyle changes. Regular communication and collaboration between the patient, caregiver and health professionals are essential for the effective management of epilepsy, so just as epilepsy has a fluid, changeable course of disease and follow-up appointments are very important, the topic of SUDEP is not a one-time conversation either.

The automobile industry is undergoing technological advancement, which includes breakthroughs such as hybrid cars, electric vehicles (EVs), and self-driving capabilities. However, despite these advances, issues remain, notably in recall management efficiency, security and risk of fraud. To solve these difficulties, the idea of Industry 4.0 has been adopted, which uses technologies such as sensors, IOT’s, and machine learning. Even this technology still has loopholes in the area of security which has been exploited negatively over time. In other to mitigate these loopholes we introduce Blockchain technology as a viable alternative, providing a safe and transparent environment. This study investigates and proposed the use of blockchain to create an enhanced Vehicle Tracking System (VTS) intended at enhancing recall management and reducing fraud in the automobile sector. The proposed solution was discussed in detail and a mock smart contract was also written, which was deployed on the Ethereum Virtual Machine (EVM).

This research delves into the epidemiology, clinical manifestations, and management of hyperprolactinemia, particularly focusing on prolactin-secreting pituitary adenomas, or prolactinomas, in Dolj County, a region historically underrepresented in medical literature. Hyperprolactinemia, a prevalent endocrine disorder, arises from excessive prolactin secretion by the pituitary gland's lactotrope cells and presents a diverse clinical picture. The most significant etiological contributors identified are prolactinomas, accounting for approximately 39% of all secretory pituitary tumors. In light of hyperprolactinemia's substantial morbidity and prevalence, this study underscores the necessity of comprehensive understanding of its regional epidemiology and clinical presentations. Our methodology incorporated collecting retrospective data across various medical facilities in Dolj, ensuing a meticulous analysis of clinical features, paraclinical investigation outcomes, and therapeutic responses among patients with prolactinomas. Emphasis was placed on discerning risk factors, demographic characteristics, and associated comorbidities to encapsulate the full spectrum of these tumors' impact within the community. Preliminary results suggest a nuanced incidence rate of prolactinomas within Dolj, with specific demographic and clinical trends potentially distinct from those reported in wider literature. These findings stress the critical role of localized studies in enhancing screening, diagnostic, and therapeutic protocols. Ultimately, this investigation offers critical insights into the epidemiology and symptomatology of prolactinomas in Dolj, significantly augmenting existing literature and informing regional medical practices.

Gastroesophageal (GE) junction adenocarcinoma is an aggressive malignancy of growing incidence and is associated with public health issues such as obesity and GERD. Management has evolved over the last 2 decades to incorporate a multidisciplinary approach including endoscopic intervention, and neoadjuvant chemotherapy/ chemoradiation and minimally invasive or more limited surgical approaches. Surgical approaches include esophagectomy, total gastrectomy, and more recently proximal gastrectomy. This review analyzes the evidence for and applicability of these varied approaches in management as well areas of continued controversy and investigation.

Bronchiolitis is an acute viral infection of the lower respiratory tract that affects infants and young children. Respiratory syncytial virus (RSV) is the most common causative agent, however other viruses can be the reason of the disease. We retrospectively reviewed the clinical features of infants aged less than 12 months referred to our Pediatric Units of Chivasso, Cirié and Ivrea for acute bronchiolitis requiring hospitalization over two consecutive bronchiolitis seasons. Patient-, disease- and treatment related variables were analyzed in this retrospective study. We were able to show how with the high flow oxygen support (HFNC) only a very low number of children (8 out of 192) need to be trasferred to our HUB referral centers. The probability of success were 96% for all patients and 93% for RSV vs. 98% for non-RSV patients (P=NS). Factor associated to failure of treatment were age below 1 months and the failure of HFNC. The wide and increasing use of HFNC in pediatric inpatients improved management of bronchiolitis in Spoke hospitals, reducing transfer to a Hub hospital provided with Intensive Care Units.

Traumatic Brain Injury (TBI) remains a leading cause of morbidity and mortality among all ages; despite the advances, understanding pathophysiological responses after TBI is still complex, involving multiple mechanisms. Previous reviews have focused on potential targets; however, the research on potential targets has continuously grown in the last five years, bringing even more alternatives and elucidating previous mechanisms. Knowing the key and updated pathophysiology concepts is vital for adequate management and better outcomes. This article reviews the underlying molecular mechanisms, the latest updates, and future directions for pathophysiology-based TBI management.

Telemedicine has been increasingly considered an effective strategy to support patients with several diagnosis and therapies, avoiding the on-site visit and drastically reducing the risks to share infections. In the recent years, a number of different technologies have been developed and applied to clinical studies, with the aim to investigate new ways for increase the early diagnoses and monitor the clinical evolution of the most predictable diseases directly from the patients’ home. Telemedicine refers to all those technological interfaces used to remotely perform clinical procedures. Telemedicine applications could be useful in several medical fields, such as preventive medicine, home patient care, education for healthcare professionals and patients, research, public health, and health management. On the other hand, the synergy of these different technologies has a significant impact on the clinical risks analysis, particularly useful in frail patients. Although Telemedicine shows to have important advantages, undoubtedly important issues still remain. The present work aims to shed light on the main advantages and disadvantages related to of each application’s features, which may serve as a useful tool for researchers.

Premature ventricular complexes (PVCs) are frequently encountered in clinical practice. The association of PVCs with adverse cardiovascular outcomes in the context of structural heart disease is well established, yet the association between PVCs and cardiovascular outcomes in the absence of structural heart disease is not fully elucidated. Cardiac magnetic resonance (CMR) seems to contribute prognostically in the latter subgroup. PVC- induced myocardial dysfunction refers to the impairment of ventricular function due to the PVCs and is mainly associated with a PVC burden greater than 10%. The surface 12- lead ECG is used to localize the anatomic site of origin and multiple algorithms have been developed to differentiate right ventricular and left ventricular outflow tract (RVOT and LVOT, respectively) origin. Novel algorithms include alternative ECG configurations and lately, sophisticated artificial intelligence methods have been utilized to distinguish the origins of outflow tract arrhythmias. The decision to therapeutically address PVCs should be taken upon the presence of symptoms or the development of PVC- induced myocardial dysfunction. The therapeutic modalities include pharmacological therapy, namely I-C antiarrhythmic drugs and beta blockers, as well as catheter ablation, which demonstrates superior efficacy and safety.

In the modern world, stress has become a pervasive concern that affects individuals' physical and mental well-being. To address this issue, many wearable devices have emerged as potential tools for stress detection and management, by measuring heart rate, heart rate variability (HRV), and various matrices related to it. This literature review aims to provide a comprehensive analysis of existing research on HRV tracking and Biofeedback using smartwatches and finger monitor/sensor pairing with reliable 3rd party mobile apps like Elite HRV, Welltory, and HRV4Training specifically designed for stress detection and management. we apply various algorithms and methodologies employed for HRV analysis and stress detection is discussed, including time-domain, frequency-domain, and non-linear analysis techniques. Prominent smartwatches, such as Apple Watch, Garmin, Fitbit, Polar, and Samsung Galaxy Watch, are evaluated based on their HRV measurement accuracy, data quality, sensor technology, and integration with stress management features. We describe the efficacy of smartwatches in providing real-time stress feedback, personalized stress management interventions, and promoting overall well-being. To assist researchers, doctors, and developers use smartwatch technology to address stress and promote holistic well-being, we discuss the data's advantages and limitations, future developments, and the significance of user-centered design and personalized interventions. Keywords: smartwatch; stress; wearable device; heart rate variability; comparative analysis

The article deals with human resource management and selected personnel indicators in 10 sustainable development. The main goal of this paper is to analyse and describe human resource 11 management focused on audit of workload, motivation of employees, the competence of staff, their 12 knowledge and experience. The article shows how the selected personnel indicators are examined 13 in selected establishments of multinational company in Slovakia, as an attractive employer inter-14 ested in growth of its employees, thus employer branding. For research methods, a case study meth-15 odology is used. Data collection was carried out through a questionnaire survey with employees in 16 the company as well as an interview with sale advisors and managers. The research aimed to point 17 out a case study of the investigation of selected personnel indicators in human resources manage-18 ment in a selected company and to examine the perception of the performance of employees in 19 connection with their financial evaluation and their satisfaction in the selected company with an 20 impact on employees´ performance. Furthermore, the research aimed to determine whether there 21 was a dependence between the subjectively perceived performance of the employees and selected 22 aspects. Further indicators were calculated, such as employment rate, proportion of wasted time 23 and labour productivity.

The article deals with human resource management and selected personnel indicators in sus-tainable development. The main goal of this paper is to analyse and describe human resource management focused on audit of workload, motivation of employees, the competence of staff, their knowledge and experience. The article shows how the selected personnel indicators are examined in selected establishments of multinational company in Slovakia, as an attractive em-ployer interested in growth of its employees, thus employer branding. For research methods, a case study methodology is used. Data collection was carried out through a questionnaire survey with employees in the company as well as an interview with sale advisors and managers. The research aimed to point out a case study of the investigation of selected personnel indicators in human resources management in a selected company and to examine the perception of the per-formance of employees in connection with their financial evaluation and their satisfaction in the selected company with an impact on employees´ performance. Furthermore, the research aimed to determine whether there was a dependence between the subjectively perceived performance of the employees and selected aspects. Further indicators were calculated, such as employment rate, proportion of wasted time and labour productivity.

According to the World Health Organization (WHO), dementia is the seventh leading reason of death among all illnesses and one of the leading causes of disability among the world’s elderly people. Day by day the number of Alzheimer’s patients is raising. Considering the increasing rate and the dangers, Alzheimer’s disease should be diagnosed carefully. Machine learning is a potential technique for Alzheimer’s diagnosis but general users do not trust machine learning models due to the black-box nature. Even, some of those models do not provide the best performance because of using only neuroimaging data. To solve these issues, this paper proposes a novel explainable Alzheimer’s disease prediction model using a multimodal dataset. This approach performs a data-level fusion using clinical data, Freesurfer MRI segmentation data, and psychological data. For Alzheimer’s disease vs cognitively normal prediction, the random forest classifier provides 100% accuracy. Furthermore, Alzheimer’s disease and non-Alzheimer’s dementia should be classified properly because their symptoms are similar. To the best of our knowledge, we are the first to present a three-class classification on Alzheimer’s disease vs cognitively normal vs non-Alzheimer’s dementia and achieved 99.86% accuracy using an ensemble model. Besides, a novel Alzheimer’s patient management architecture is also proposed in this work..

Gout is the most common form of inflammatory arthritis. Hyperuricaemia is the pre-requisite for gout and is influenced by variable modifiable and non-modifiable risk factors. Clinical features unique for gout are due to deposition of monosodium urate (MSU) crystal in articular and extra articular tissues. Among various treating agents, anti-inflammatory drugs and urate lowering therapies (ULT) are used widely and successfully, however, non-medicinal means are also effective in the disorder. In their updated guidelines, ACR (2012) and EULAR (2016) recommended both medicinal and non-medicinal approaches that could be used in treating gout, though some of the recommendations are based on lower level of evidence. Moreover, researchers’ continued effort in finding new gout managing agents appear promising, for example, role of Lesinurad in gout management (CLEAR1, CLEAR2). In this new synthesis the author is aimed to provide updated information on gout management based on a systematic review including published work within last ten years between 2008 and 2018 and for this purpose, using ‘clinical trials in gout management’ string, published worked searched in PubMed database from 1st September 2018 to 30 October 2018. Besides the recent ACR and EULAR evidence based management guidelines, the author reviewed another 91 (total 93) articles to make this new draft – 39 articles describe role of pharmacological agents and 54 describe different gout risks, pharmacokinetics/pharmacodynamics of ULT, association between raised sUA level and renal impairment, efficacy of non-pharmacological agents in reducing sUA. According to published work, anti-inflammatory agent is the most appropriate drug group in mitigating inflammatory symptoms of gout, though they often adversely affect over other vital 2 organs with impaired function. Besides ULT, uricase analogues are also found useful in non refractory gout. Since anti-inflammatory agents and ULT contraindicate in some clinical conditions, intra-articular steroid and or adrenocorticotropic hormone (ACTH) are appropriate alternatives instead. However, head-to-head comparison between different NSAIDs, NSAID and prednisolone, NSAID and colchicine are yet to perform. Use of combined anti-inflammatory preparations in gout is also based on lower level of evidence. Regarding effective maximum dose and long-standing impact of ULT on vital organs we are yet to reach a conclusion. Likewise, non-medicinal approaches are widely using in achieving target sUA level, though some of them are based on biased study outcomes and or study with inadequate power, requiring further analysis. Among non-pharmacological approaches, life-style modification, restriction of purine rich diets, avoidance of gout inciting agents are important, but inconclusive. Educating patients’ about diseases, risk factors, available treatment options and side effects from them are also important in terms of achieving sUA level, nevertheless too much counseling sometimes could be worthless.

The need to consider sustainability has substantially increased the complexity of implementing construction and infrastructure projects and new management practices have emerged during the past decade to tackle the global sustainability challenges, where the engagement and coordination of broader competences from stakeholders throughout the supply chain is required. This new project management paradigm has been accompanied by greater attention to the concept of collaborative business arrangements, often called partnering, that has emerged in construction and infrastructure projects to improve project deliveries. However, there are uncertainties about the optimal strategy to foster, integrate and maintain the required collaboration, particularly in sustainable management practices in infrastructure maintenance projects. This paper addresses these uncertainties, based on a single case study of an infrastructure maintenance contract involving an extensive collaborative business arrangement. The findings reveal that different collaborative practices affect diverse aspects of sustainable project management. Further, the extensive collaborative business arrangement has promoted sustainable deliveries based upon organizational learning and continuous improvements. Thus, this study offers an encouraging example of how extensive collaboration can be fostered and play a key role in sustainable project management practices.

Background: As noninvasive prenatal screening usage grows in the general obstetrics setting, proper patient education on the screen’s benefits and limitations is needed. Objective: Describe the use of a technology platform designed for large-scale dissemination of noninvasive prenatal screening information and results. Study Design: The technology platform functioned as follows: Patients were emailed a link to an noninvasive prenatal screening general-education video upon laboratory receipt of a test requisition. Providers were then notified upon availability of patients’ results. If noninvasive prenatal screening results were negative, the patient was sent an automated email with instructions to access results through a secure portal where she could watch tailored informational videos, request “on-demand” or scheduled genetic counseling, or decline any further services. If genetic counseling was elected, a summary of the session was sent to the ordering provider and patient upon completion. If noninvasive prenatal screening results were positive, either the ordering provider or a board-certified genetic counselor contacted the patient directly to communicate test results and provide counseling. The number and type of results issued through the platform, the number and type of genetic counseling consultations completed, and factors associated with requesting laboratory-delivered genetic counseling were tracked and analyzed for a 39-month period. Results: Over the study period, 67,122 noninvasive prenatal screening results were issued through the platform, and 4,673 patients elected genetic counseling consultations; 95.2% (n=4,450) of consultations were for patients receiving negative results. Over 70% (n= 3,370) of consultations were on-demand rather than scheduled. Median consultation time was 14 minutes for positive results and six minutes for negative results. A positive screen, advanced maternal age, family history, previous history of a pregnancy with a chromosomal abnormality, and other high-risk pregnancy were associated with the greatest odds of electing laboratory-delivered genetic counseling. Conclusions: By combining web education, automated notifications, and genetic counseling, we implemented a service that effectively facilitates results disclosure for ordering providers. These data demonstrate the capability to deliver noninvasive prenatal screening results, education, and counseling—congruent with management guidelines—to a large population, which is imperative to quality care as uptake increases.

The increase in the frequency of droughts in Africa has increased the interest in crops with drought escape mechanisms like grain Amaranth (Amaranthus hypochondriacus). However, the white-seeded grain Amaranth is easily cross-pollinated by its black seeded wild relatives such as smooth pigweed (Amaranthus hybridus). A study to investigate a minimum isolation distance enough to prevent seed contamination study was carried out at three sites namely Gweru and Bindura (2020/2021 rainy season) and Shamva (2021/2022 rainy season). Smooth pigweed was planted at distances of 3 to 150 m from pure grain Amaranth. Close monitoring of phenology and measurement of meteorological conditions such as temperature, wind speed and direction were done during the anthesis period. Cross-pollination in grain Amaranth was influenced by distance from the pollen source. A maximum of 12.9 % contamination rate was measured within the 10 m radius from the pollen donor plot and a minimum outcrossing rate of 0.45 % was recorded at the widest distance of 150 m. It can be concluded that complete removal of wild relatives of grain Amaranth is important within the field at as far as 150 m from the crop.

Abstract: Colistin is a last-resort antimicrobial for treating multidrug-resistant Gram-negative bacteria. Phe-notypic colistin resistance is highly associated with plasmid-mediated mobile colistin resistance (mcr) genes. mcr-bearing Enterobacteriaceae have been detected in many countries, with the emergence of colistin-resistant pathogens a global concern. This study assessed the distribution of mcr-1, mcr-2, mcr-3, mcr-4, and mcr-5 genes with the phenotypic colistin resistance in isolates from diarrheal infants and children in Bangladesh. Bacteria were identified using the API-20E biochemical panel and 16s rDNA gene sequencing. Polymerase chain reac-tions detected mcr gene variants in the isolates. Their susceptibilities to colistin were determined by agar dilu-tion and E-test by minimal inhibitory concentration (MIC) measurements. Over 30.0% (69/225) of isolates showed colistin resistance by agar dilution assessment (MIC> 2.0 μg/mL). Overall, 15.5% of isolates carried mcr genes (7, mcr-1; 17, mcr-2; 13, mcr-3; and co-occurrence occurred in 2 isolates). Clinical breakout MIC val-ues (≥ 4 μg/mL) were associated with 91.3% of mcr-positive isolates. The mcr-positive pathogens include twenty Escherichia spp., five Shigella flexneri, five Citrobacter spp., two Klebsiella pneumoniae, and three Pseudo-monas parafulva. mcr-genes appeared to be significantly associated with phenotypic colistin resistance phe-nomena (p=0.000), with 100% colistin-resistant isolates showing MDR phenomena. Age and sex of patients showed no significant association with detected mcr variants. Overall, mcr-associated colistin-resistant bacte-ria have emerged in Bangladesh, which warrants further research to determine their spread and instigate ac-tivities to reduce resistance.

Urban logistics is a critical component of smart city initiatives, aiming to enhance the efficiency and sustainability of goods delivery in densely populated areas. This paper explores the integration of artificial intelligence (AI), autonomous vehicles, and Internet of Things (IoT) technologies to optimize urban logistics. By leveraging real-time data from IoT-enabled infrastructure and AI-driven analytics, we propose a framework for dynamic route planning, traffic signal control, and predictive demand management for delivery services.

We explore the integration of smart pixel light modulators (SPLMs) into bidirectional optical neural networks (BONNs), highlighting their advantages over traditional spatial light modulators (SLMs). SPLMs enhance BONN performance by enabling faster light modulation in both directions, significantly increasing the refresh rate of neural network weights to hundreds of megahertz, thus facilitating the practical implementation of the backpropagation algorithm and two-mirror-like BONN structures. The architecture of an SPLM-based BONN (SPBONN) features bidirectional modulation, simplifying hardware with electrical fan-in and fan-out. Scalability limitations of the projection system restrict input and output array sizes but achieve high throughput, up to 4.3 × 10¹⁷ MAC/s with 100 layers. Energy assessments showed that the SPLM array, despite its higher power consumption compared to the SLM array, is manageable via effective heat dissipation. Smart pixels with programmable memory in the SPBONN provide a cost-effective solution for expanding network node size and overcoming scalability limitations without the need for additional hardware.

Power systems have been going through a barrage of transformations due to the recent developments in the field, such as deregulation and restructuring of the electric power supply chain, the proliferation of distributed generation (DG), and advancements in information and communications technologies. These have significantly impacted the approach to the planning, design, and operation of active distribution networks or systems. Due to this constant change, the system has become more complex to plan, maintain, and control. In this paper, the benefits, and challenges of active distribution systems relative to traditional passive and active distribution systems are evaluated and investigated while the management and operational characteristics of demand-side resources in Active Distribution Systems (ADS) are studied. In a typical ADS, there exist several vulnerabilities and threats that eventually pose a challenge in the control and automation of substations. These vulnerabilities and threats are reviewed, and potential mitigation measures are suggested. Also in this paper, the communication technologies, and their implementation in terms of control and automation capabilities in active distribution networks are also studied. From this work, it is concluded that communication technologies play an integral role in the realization of a more active distribution networks and that the internet of energy (IoE) is a major player in ADS in the reduction of faults due to human error, fast responses, and improving the stability of power supply. Cyber threats are also and will still be a continuous challenge in smart metering technologies and in substation automation systems (SAS) which will require frequent evaluation and mitigation measures so as not to prevent the power supply system from collapsing.

Recently, the Internet of Things (IoT) has attracted wide attention from many fields, especially healthcare, because of its large capacities of information perception and collection. In this paper, we present an IoT-based home telehealth system for providing smart healthcare management for individuals, especially older people. Each client node of the system is mainly composed of an electronic water meter that records the user's daily water usage and an unobtrusive sleep sensor that monitors the user's physiological parameters during sleep such as heart rate (HR), respiratory rate (RR), body movement (BM), and states on the bed or outside the bed. The sleep sensor senses the biosignals and states by a sensor matrix composed of 12 piezoelectric sensors. The collected data can be transmitted to a remote centralized cloud service by a wireless home gateway for analyzing the living pattern and rhythm of users. Furthermore, the periodic feedback of results can be provided to users themselves as well as their family and health advisers. In the present study, data collections from a total of 18 older subjects were made for one year to evaluate the effectiveness of the proposed system. By analyzing living pattern and rhythm, preliminary results indicate the effectiveness of the telehealth system and suggest the potential of the system regarding improvement of quality of life (QoL) of older people and promotion of their health.

Smart Cities leverage technology to address various urban challenges and creating disaster resilience is one of them. Technology is a vast and ever-evolving field, and hence the research on technology for improving disaster resilience is scattered. A major drawback of prevailing studies is that they continue to overlook the bottlenecks to effectively harness the benefits of technological innovations and that includes the need for a holistic and multidisciplinary approach. Therefore, this research intends to address that need by methodising the scattered research to provide meaningful insights towards the linkages between society and technological innovations through an urban scholar’s perspective. A comprehensive literature review was conducted to explore emerging and disruptive technologies for improving disaster resilience in Smart Cities. The review findings identified the emerging and disruptive technologies for improving disaster resilience in Smart Cities which were then classified. The findings suggested 4 key criteria to classify technologies including their impact the society, adoption speed, technology maturity and capabilities offered to the community. A Smart City which plans the technologies/ tools for disaster resilience may conduct the assessments under the aforementioned criteria, together with their context-specific feasibility assessments to make informed decisions and ultimately prioritise the most suitable for them.

The aim of this study was to determine the extent to which the Tyme Wear smart shirt is as reliable and valid in detecting personalized ventilatory thresholds when compared to the Parvo Medics TrueOne 2400. In this validation study, 19 subjects were recruited to conduct two graded exercise test (GXT) trials. Each GXT trial was separated by seven to ten days of rest. During the GXT, gas exchange and heart rate data were collected by the TrueOne 2400 (TRUE) in addition to the ventilation data collected by the Tyme Wear smart shirt (S-PRED). Gas exchange data from TRUE was used to detect VT1 and VT2. TRUE and S-PRED VT1 and VT2 were compared to determine the reliability and validity of the smart shirt. Of the 19 subjects, data from 15 subjects were used during analysis. S-PRED exhibited excellent (ICC > 0.90) reliability for detection of VT1 and VT2 utilizing time point and workload and moderate (0.90 > ICC > 0.75 ) reliability utilizing heart rate. TRUE exhibited excellent reliability for detection of VT1 and VT2 utilizing time point, workload, and heart rate. When compared to TRUE, S-PRED appears to underestimate the VT1 workload (p > 0.05) across both trials and heart rate (p < 0.05) for trial 1. However, S-PRED appears to underestimate VT2 workload (p < 0.05) and heart rate (p < 0.05) across both trials. The result from this study suggests that the Tyme Wear smart shirt is less valid but is comparable in reliability when compared to the gold standard. Moreover, despite the underestimation of S-PRED VT1 and VT2, the S-PRED detected personalized ventilatory thresholds will provide an adequate training workload for most individuals. In conclusion, the Tyme Wear smart shirt provides easily accessible testing to establish threshold-guided training zones but does not devalue the long-standing laboratory equivalent.

The COVID-19 pandemic has put lifestyles in question, changed daily routines and limited citizen freedoms that seemed inalienable before. A human activity that was greatly affected since the beginning of the health crisis is mobility. Focusing on mobility, we aim to discuss the transformational impact that the pandemic brought on this specific urban domain, especially with regards to the promotion of the smart growth agenda and the acceleration towards the smart city paradigm. We collect 60 initial policy responses related to urban mobility from 86 cities around the world and analyse them based on the challenge they aim to address, the exact principles of smart growth and sustainable mobility that they encapsulate and the level of ICT penetration. Our findings suggest that emerging strategies, although mainly temporary, are transformational, in line with the principles of smart growth. As a result the pandemic becomes an opportunity for shifting towards more sustainable urban planning and mobility practices. However, most policy responses adopted during the first months of the pandemic fail to leverage advancements made in the field of smart cities, and to adopt off-the-shelf solutions such as in monitoring, alerting and operations management.

This study assessed stakeholders’ perception on the prospects and challenges of practising Climate–Smart Agroforestry in the Asunafo North Municipal Assembly in the Ahafo Region in Ghana. Interviewer administered questionnaires were used to collect cross-sectional data from 250 cocoa, food and cash crop farmers drawn from four (4) communities using simple random sampling. And nine (9) in-depth interviews were also conducted to elicit key stakeholder perspectives. Stakeholders also held the view that Climate-Smart Agroforestry encourages the use of stress-tolerant crop varieties, increase income, improve soil productivity, diversify farm produce, urges the reduction of input supply and recommends the timely usage of the inputs, ensures better market system for farm produce, cost of production decreases during the practice of Agroforestry, agro-ecological functions and Climate-Smart Agroforestry can best help adapt to the threats of climate change in the agriculture sector. The challenges included insecure tree ownership right, fast-declining soil fertility and long maturity period of Agroforestry trees, land tenure issues, illegal tree logging (chainsaw operators) on farms, lack of practical understanding of the approach, inadequate knowledge and information and inadequate supportive facilities in the study area. The study recommends further studies on the existing forest policy and legislations and its implications on the practice and adoption of Climate-Smart Agroforestry in respond to climate change in the area.

In the paper, an improved smart meter data-based three-stage algorithm to calculate the power/energy losses in the three-phase networks with the voltage level below 0.4 kV (low voltage - LV) is presented. In the first stage, a loading function of input data was built having as main feature the working at the same time with files from the database of smart metering system (SMS) containing the hourly electricity records, and files including the characteristic load profiles established by the Distribution Network Operator (DNO) for the consumers with standard energy meters depending the following factors: consumption class, day and season. In the second stage, a function which is based on the work with the structure vectors was implemented to identify easy the configuration of analysed networks. In the third stage, an improved version of forward/backward sweep-based algorithm was proposed to calculate fast the power/energy losses to three-phase LV distribution networks in balanced and unbalanced regime. A real LV rural distribution network from a pilot zone belonging to a Distribution Network Operator (DNO) from Romania was used to confirm the accuracy of the proposed approach. The comparison with the results obtained using the DigSilent PowerFactory Simulation Package certified the performance of the algorithm, the mean absolute percentage error (MAPE) being 0.94%.

Aim: To analyze a single center's experience with Short Bowel Syndrome/ Chronic Intestinal Failure (SBS/CIF) in adult patients treated with Home Parenteral Nutrition (HPN). Materials and methods: In the last thirty years, 13 patients with SBS/CIF were included in an HPN program. Results: Between 1992 and 2023, 13 patients were included in an HPN program. The primary underlying pathology was acute mesenteric ischemia. The median age of the starting HPN was 44 years old. Most are submitted to several surgeries of extensive intestinal resection with posterior intestinal reconstruction. Five of the 13 patients have died while on HPN for a median of 42 months. The causes of death HPN-related were catheter sepsis, endocarditis with cardiac failure, or hepatic failure. One patient died due to underlying pathology: pelvic abscesses and bleeding related to radiotherapy. Eight patients remain alive with a median time of HPN of 173 months. During the HPN support, the most frequent complications were venous catheter infection and venous territory thrombosis. None of the eight patients alive have hepatic failure. Two patients recently started teduglutide, with good tolerance, and need reduction of HPN support. All these eight patients have a satisfactory quality of life (parenteral support needs range between five to two nutrition bags per week). Conclusion: HPN remains the gold standard of SBS/CIF treatment, although Teduglutide may reduce HPN needs and HPN complications and provide a better quality of life. An HPN multidisciplinary healthcare group support is essential to ensure these patients' survival and quality of life. Keywords Short bowel Syndrome, Chronic Intestinal failure, Home Parenteral Nutrition, Teduglutide, Complications of Parenteral Support.

This review investigates the pivotal challenge of recycling material waste in the context of Additive Manufacturing with an emphasis on decentralized 3D printing, shedding light on its environmental and economic implications. With additive manufacturing experiencing exponential growth, the environmental impacts of waste generation during 3D printing processes have become increasingly significant. The paper explores various recycled materials commonly used in 3D printing, including polymers like polylactic acid (PLA), acrylonitrile butadiene styrene (ABS), and polyethylene terephthalate glycol (PETG), evaluating their characteristics and usability. General recycling methodologies, encompassing mechanical and chemical processes, are examined with attention to challenges such as polymer sorting, additives, coatings, contamination, and thermoset reprocessing. The economic and societal impact of integrating recycled materials into 3D printing and the environmental impacts are examined. By identifying research gaps and proposing future trends, this review contributes to a deeper understanding of how recycling can play a pivotal role in achieving environmental sustainability and economic viability within the decentralized 3D printing landscape.

Tilapia, the second most extensively farmed fish in the Philippines, generates significant amounts of waste that are often underutilized, leading to environmental concerns. One specific waste material is tilapia heads, which contain a valuable extracellular matrix (ECM) and an abundant source of bioactive materials that have a potential application in various fields, including biomaterials for wound healing and nutraceuticals. This study aims to evaluate the effects of sonication as a viable decellularization method for extracting ECM from tilapia fish heads. Histological analyses, employing H&E staining, revealed a higher reduction in basophilic components in the sonication-assisted (dWS) samples compared to those without sonication (dNS), as confirmed by DNA quantification. Notably, dWS samples subjected to 1% SDS sonication for 10 minutes exhibited the lowest DNA content with a removal rate of 93.7%. However, the same dWS sample also manifested the highest protein removal with a retained protein of 33.86%. The SDS-PAGE analysis of both dWS and dNS samples exhibited a uniform pattern, featuring identical four subunit bands—namely, the β-dimer (225-227 kDa), γ bands (228-230 kDa), and two alpha chains (α1 and α2 chains) (116-120 kDa)—indicating that sonication did not introduce discernible alterations in the helical structure of collagen. ATR-FTIR spectra further confirmed the presence of collagen as indicated by the detection of collagen type I indicators, including amides A, B, I, II, and III, in all decellularized samples. The above findings highlight the potential of sonication to aid in the decellularization of waste tilapia heads with future research targeting practical applications in wound healing, nutraceuticals, and sustainable environmental preservation through waste utilization.

A suitable waste management strategy is crucial for a sustainable and efficient circular economy in the construction sector, and requires precise data on the volume of demolition waste (DW) gen-erated. Therefore, we developed an optimal machine learning (ML) model to forecast the quantity of recycling and landfill waste based on the characteristics of DW. A dataset comprising infor-mation on the characteristics of 150 buildings, demolition equipment utilized, and volume of five waste types generated (i.e., recyclable mineral, recyclable combustible, landfill specified, and landfill mix waste, and recyclable minerals) was constructed. ML models were developed to predict the quantities of such waste. Artificial neural network, decision tree, gradient boosting machine, k-nearest neighbors, linear regression, random forest (RF), and support vector regression were applied, and optimal models were derived via hyperparameter tuning. The RF model demonstrated superior performance. In both validation and test phases, the “recyclable mineral waste” and “recyclable combustible waste” models achieved accuracies of of 0.987 and 0.972, re-spectively. The “recyclable metals” and “landfill specified waste” models achieved accuracies of 0.953 and 0.858 or higher, respectively. Moreover, the “landfill mix waste” model exhibited an accuracy of 0.984 or higher. SHapley Additive exPlanations analysis highlighted floor area as the primary input variable influencing model performance. The type of equipment employed in demolition emerged as another crucial input variable impacting the volume of recycling and landfill wastes generated. The developed model can provide precise data on waste management, thereby facilitating the decision-making process for industry professionals.

E-waste management (EWM) refers to the operation-management of discarded or unproductive electronic devices and components, a challenge exacerbated due to overindulgent urbanization. This article presents a multidimensional cost-function-based analysis of the EWM framework structured on three modules - environmental, economic, and social uncertainties - which contemplate the 3 pillars of sustainability in an e-waste recycling plant, including the production-delivery-utilization process. The framework incorporates material recovery from a single e-waste facility provisioning for chemical and mechanical recycling. Each module is ranked using independent Machine Learning (ML) protocols: a) Analytical Hierarchical Process (AHP) and b) combined AHP and Principal Component Analysis (PCA). From a long list of possible contributors, the model identifies and ranks two key sustainability contributors to the EWM supply chain: overall energy consumption and volume of carbon dioxide generated. Another key finding is a precise time window for policy resurrection, which for the data considered, happens to be 400-600 days from the start of operation. Another interesting outcome is the quality of prediction using a combination of AHP and PCA, which consistently produced better results than any of these ML methods individually implemented. Model outcomes have been verified using a case study to outline a future E-waste sustained roadmap.

Electronic waste (e-waste), characterized by the widespread disposal of electronic devices, shows a growing environmental challenge. In this study, we explore the electrocatalytic potential of gold nanoparticles supported on Vulcan obtained from e-waste for their application as electrocatalysts for the methanol oxidation reaction in alkaline media. Gold nanoparticles are synthesized from gold coatings recovered from Intel Pentium 4 processor pins, highlighting their sustainability as electrocatalyst precursors. Comprehensive characterization, including UV-Vis spectroscopy, transmission electron microscopy (TEM), scanning electron microscopy (SEM) and X-ray dif-fraction, is performed to assess the electrocatalyst's structural properties. Electrochemical evalu-ation is carried out in 0.5 M KOH electrolyte employing the rotating disk electrode technique, us-ing cyclic voltammetry for the study of methanol oxidation. Remarkably, the gold nanoparticles show electrocatalytic activity on par with commercially synthesized counterparts, demonstrating the feasibility of this approach for sustainable electrocatalyst production. Thus, this research opens new routes for utilizing e-waste as a source of valuable catalyst materials, addressing en-vironmental and technological challenges in the field of alkaline fuel cells.

In the article, the authors presented the problem of the transition effect in bridge engineering, its causes, negative consequences, and suggested a solution involving the use of integral bridges with the embankment through a spatial bars structure using reinforced composite polymer material. Integral bridges are designed to collaborate with road or railway embankments in bearing loads. Additionally, their application minimizes maintenance and construction costs while enhancing durability. Current solutions in bridge engineering were described. It is predicted that the presented concept will reduce the amount of plastic waste and contribute to the long-term use of materials. The article emphasized the importance of sustainable development, recycling, and the potential application of substitute materials.

Annotation. The experience of using coal flotation waste (CFW) as a weakly exothermic insulating backfill for insulating the head part of forging dead-melted steel ingots is presented.It has been shown that when using weakly exothermic fills based on single-component fills in the form of CFW, it is possible to reduce the chemical heterogeneity of the ingot by producing a closed shrinkage cavity, which allows halving heat loss and depth of penetration of shrinkage looseness into the body of the ingot, reducing the segregation of impurities, compacting the head part of the ingot and increasing the yield; moreover, the profitable part of the ingot is more dense and less contaminated with nonmetallic inclusions.The studied patterns of the formation of a closed shrinkage cavity with a dense “bridge” in the head part of a dead-melted steel ingot made it possible to develop and implement a technology for casting large forging ingots of sufficiently high quality using weakly exothermic heat-insulating materials based on metallurgical waste (coke screenings, coal flotation waste)

Smelting used to be less efficient in the past; therefore, wastes obtained from historical processing at smelter plants usually contain certain quantities of valuable metals. Upon the extraction of useful metal elements, metallurgical slag can be repurposed as an alternative mineral raw material in the building sector. A case study was conducted, which included an investigation of the physico-chemical, mineralogical, and microstructural properties of Pb-Zn slag found at the historic landfill near the Topilnica Veles smelter in North Macedonia. The slag was sampled using drill holes. The mineralogical and microstructural analysis revealed that the Pb-Zn slag is a very complex and inhomogeneous alternative raw material with utilizable levels of metals, specifically Pb (2.3 wt%), Zn (7.1 wt%), and Ag (27.5 ppm). Crystalline mineral phases wurtzite, sphalerite, galena, cerussite, akermanite, wüstite, monticellite, franklinite, and zincite were identified in the analyzed samples. The slag’s matrix consisted of alumino-silicates, amorphous silicates, and mixtures of spinel and silicates. Because the extraction of Pb, Zn, and Ag has economic potential, the first reutilization stage will be to convert metal concentrates into their collective concentrate, from which the maximum amount of these valuable elements may be taken out. This will include combination of gravity concentration and separation techniques. The next step is to assess the Pb-Zn slag’s potential applications in civil engineering based on its mineralogical and physico-mechanical properties. Alumino-silicates, amorphous silicates, and mixtures of spinel and silicates present in Pb-Zn slag, which contain high concentrations of SiO2, Al2O3, CaO, and Fe2O3, are suitable for use in cementitious building composites. The goal of this research is to suggest a solution for closing the circle of slag's reutilization in terms of Zero Waste principles, so it is critical to thoroughly investigate the material and establish methods and preparation processes, as well as ways of concentrating useful components into commercial products.

Glycerol is the main residue in the biodiesel production industry; therefore, their valorisation is crucial. Acetalization of glycerol towards fuel additives as solketal (2,2-dimethyl-1,3-dioxolan-4-methanol) is of high interest, promoting circular economy since it can be added to the biodiesel or even fossil-diesel to improve their quality and efficiency. Straightforward prepared metal-organic framework (MOF) materials of MOF-808 family were applied to the valorisation of glycerol for the first time. In particular, MOF-808(Hf) revealed to be an effective heterogeneous catalyst to produce solketal under moderate conditions: small amount of the MOF material (only 4wt% of glycerol), ratio 1:6 of glycerol/acetone and temperature of 60 ºC. The high efficiency of MOF-808(Hf) was associated with the high amount of acid centres present in its structure. Furthermore, its structural characteristics such as window opening cavities size and pore diameters showed to be ideal to reuse this material during at least ten consecutive reaction cycles without losing activity (conversion > 90% and selectivity > 98%). Remarkably, it was not necessary the washing or other activation treatment of the MOF-808(Hf) catalyst between cycles (no pore blockage occurred) and it maintained structural integrity after the ten cycles, confirming to be a sustainable heterogeneous catalyst to the glycerol valorisation.

Over the past decade, plasma waste treatment has become a more prominent technology due to increasing problems with waste disposal and realizing opportunities to generate valuable co-products. Plasma waste treatment extensively uses atmospheric pressure (RF) inductive coupled plasma (ICP) torches. In situ Optical Emission Spectroscopy (OES) is used to evaluate the developed RF ICP torch for Municipal Solid Waste (MSW) treatment and ascertain the plasma parameters to understand the physical mechanism involved. The argon plasma jet's electron temperature and plasma density outside the torch chamber are calculated using the Boltzmann plot and Stark broadening at different gas flow rates, and RF power. The expected electron temperature and plasma density behaviour were observed at a low gas flow rate. The electron temperature decreases with the RF power from 8089 K to 6097 K as demand for increasing the plasma density. An energy loss mechanism was revealed while raising the gas flow rate, as the electron temperature increases with RF power from 5750 K to 6221 K, and the plasma density decreases. This behaviour is due to the anomalous skin effect. Detecting and avoiding this phenomenon is essential as it negatively affects torch energy efficiency and waste treatment.

Hybrid reverse osmosis electrodialysis systems make it possible to obtain solutions with a higher concentration of components compared to single electrodialysis treatment, i.e. more efficient separation of brine and pure water. The article proposes experimental and pilot-industrial studies of a hybrid membrane system operation using industrial wastewater for the disposal of liquid waste from an ion-exchange chemical-desalting water treatment plant of a thermal power plant, followed by a calculation of economic efficiency and an analysis of the environmental feasibility of their use. The developed technological scheme offers separate processing of acidic and alkaline waste regeneration solutions using calcium carbonate reagent and desalination on baromembrane and electromembrane units to obtain clean water and dry residue. The hybrid system includes a booster filter press and an evaporator. The hybrid system makes it possible to provide a thermal power plant with a "zero discharge" with a minimum consumption of reagents and electricity, as well as return all water from wastewater to the power plant cycle.

Indonesia's government anticipates waste problems by managing them through a large number of waste reduction programs. From a governance perspective in Indonesia, it is known that actors from diverse governmental levels and across sectors are involved in waste management, and their involvement largely depends on their institutional goals and problems. Hence, they are expected to coherently collaborate together by developing and implementing sustainable instruments and resources for improving waste management problems. However, it is necessary to understand how supportive and restrictive the governance of waste reduction programs is to encourage successful trash reduction. This study is designed to evaluate and examine the application of Community-Based Solid Waste Management (CBSWM) in Makassar. In this research, The Governance Assessment Tool (GAT) was applied to analyze the governance context of the waste reduction programs in Makassar qualitatively. From the assessment, contexts can be described as either supportive or restrictive of the processes of implementing public policies on waste management. As a result of such an assessment, this study shed light on some opportunities to improve the governance of waste management implementation's impact on reducing waste in Makassar, South Sulawesi, Indonesia. The conclusion of this study depicts that the most important actors are affiliated with the local government and the community. Moreover, this study shows that the assessment of contextual governance is predominantly restrictive.

With a view to sustainable development and circular economy, this work focused on the possibility to valorize a secondary waste stream of recycled carbon fiber (rCF) to produce a 3D printing usable material with PA6,6 polymer matrix. The reinforcing fibers implemented in the present research are the result of a double recovery action: starting with pyrolysis from which long fibers are obtained, used to produce non-woven fabrics and, subsequently, fiber agglomerate wastes obtained from this last process are ground in a ball mill. The effect of a different amount of reinforcement at 5% and 10% by weight on the mechanical properties of 3D printed thermoplastic composites was investigated. Although the recycled fraction was successfully integrated in the production of filaments for 3D printing and therefore in the production of specimens via Fused Deposition Modeling technique, the results showed that fibers did not improve the mechanical properties as expected, due to an unsuitable average size distribution and the presence of a predominant dusty fraction ascribed to the non-optimized ball milling process. PA6,6 + 10 wt.% rCF composites exhibited a tensile strength of 59.53 MPa and a tensile modulus of 2.24 GPa, which correspond to an improvement in mechanical behavior of 21 5 % and 5 21 % compared to the neat PA6,6 specimens, respectively. The printed composite specimens loaded with the lowest content of rCF provided the greatest improvement in strength (+ 9% over the neat sample). Then, a prediction of the “optimum” critical length of carbon fibers was proposed that could be used for future optimizations of the recycled fiber processing.

The detection of waste plastics in the marine and terrestrial environment using satellite Earth Observation data offers the possibility of large-scale mapping, and reducing on-the-ground manual investigation. In addition, costs are kept to a minimum by utilizing free-to-access Copernicus data. A Machine Learning based classifier was developed to run on Sentinel-1 and -2 data. In support of the training and validation, a dataset was created with terrestrial and aquatic cases by manually digitizing varying landcover classes alongside plastics under the sub-categories of greenhouses, plastic, tyres and waste sites. The trained classifier, including an Artificial Neural Network and post-processing decision tree, was verified using five locations encompassing these different forms of plastic. Although exact matchups are challenging to digitize, the performance has generated high accuracy statistics, and the resulting land cover classifications have been used to map the occurrence of plastic waste in aquatic and terrestrial environments.

Various metals and semiconductors containing Printed Circuit Boards (PCBs) are abundant in any electronic device equipped with controlling and computing features. These devices inevitably constitute E-waste after the end of service life. The typical construction of PCBs includes mechanically and chemically resistive materials, which significantly reduce the reaction rate or even avoid accessing chemical reagents (dissolvents) to target metals. Additionally, the presence of relatively reactive polymers and compounds from PCBs requires high energy consumption and reactive supply due to the formation of undesirable and sometimes environmentally hazardous reaction products. Preliminarily milling PCBs into powder is a promising method for increasing the reaction rate and avoiding liquid and gaseous emissions. Unfortunately, current state-of-the-art milling methods also lead to the presence of significantly more reactive polymers still adhered to milled target metal particles. This paper aims to find a novel single and two-stage disintegration-milling approach that can provide the formation of metal-rich particle size fractions. The morphology, particle fraction sizes, bulk density, and metal content in produced particles were measured and compared. Research results show the highest bulk density (up to 6.8 g·cm-3) and total metal content (up to 95.2 wt. %) in finest sieved fractions after the single-step milling of PCBs. Therefore, the concentrations of about half tested metallic elements are higher in the single milled specimen and with lower adhered plastics concentrations, as compared to double milled specimens.

Municipal solid waste management is a growing worldwide challenge. Landfill mining is a promising technique to reduce MSW landfills. In the present study, arbitrary embankments made of different MSW fractions are analyzed to find the safety factor of their slopes. Properties of Municipal solid waste fines (MSWF), Shredded MSW, MSW Incineration Ash, and MSW having particles less than 35 mm are used in the analysis. For doing the same, finite element-based application 'Plaxis-2D' is used. The safety of slopes is assessed while the water table is inserted, and a uniform load is applied to the embankment to establish how well they will perform in critical situations. It was found that the slope made of shredded MSW is most safe due to its low density and high friction angle, while the least safe slope is made of MSW having less than 35 mm fractions.

Lignocellulosic biomass fractionation is typically performed using methods that are somehow harsh to the environment, such as in the case of the kraft pulping. In recent years, the development of new sustainable and environmentally friendly alternatives has grown significantly. Among the developed systems, bio-based solvents emerge as promising alternatives for biomass processing. Therefore, in the present work, the bio-based and renewable chemicals, levulinic acid (LA) and formic acid (FA), were combined to fractionate lignocellulosic waste (i.e., Maritime pine sawdust) and isolate lignin. Different parameters, such as LA/FA ratio, temperature, and extraction time, were optimized to boost the yield and purity of extracted lignin. The LA/FA ratio was found to be crucial regarding the superior lignin extraction from the waste biomass. Moreover, the increase in temperature and extraction time enhances the amount of extracted residue but compromises the lignin purity and reduces its molecular weight. The electron microscopy images revealed that biomass samples suffer significant structural and morphological changes, which further suggests the suitability of the new developed bio-fractionation process. Same was concluded by the FTIR analysis, in which no remaining lignin was detected in the cellulose-rich fraction. Overall, the novel combination of bio-sourced FA and LA has shown to be a very promising system for lignin extraction of high purity from biomass waste, thus contributing to extend the opportunities of lignin manipulation and valorisation into novel added-value biomaterials.

In this study, the properties of unsaturated polyester resin were studied in the presence of recycled ceramic waste particles. Herein, composites were created that contained 28.5-50 wt% porcelain particles (particle size <180 µm). High filler contents increased the gel time and decreased the exotherm temperature of unsaturated polyester resin during curing. The obtained results showed that physical parameters, such as the resin density and porosity, increased as the filler content increased. In addition, the X-ray diffraction results indicated that the produced samples were a combination of ceramic waste particles and unsaturated polyester resin, resulting in semi crystalline structure. The results showed that the maximum water absorption at 40°C increased from 0.97 to 1.5% as the filler content increased from 28.5 to 50 wt%; in this process, the materials experienced a color change but did not lose mechanical performance. Finally, the samples were characterized by thermogravimetric analysis (TGA) to study the effect of porcelain powder on the thermal degradation of the resin. The TGA scans were analyzed with the Friedman method. The results indicated that the samples with porcelain powder exhibited substantially better thermal stability than unsaturated polyester resin.

The aim of the research was a comprehensive evaluation of concrete using the EIPI method. In the evaluation the compressive strength of concrete and its durability properties represented by sorptivity and air permeability were taken into account. Since copper slag waste with increased natural radioactivity was used in the assessed concrete, additional evaluation was carried out taking into account the influence of natural radioactivity within the performance index. Also the reference concrete, which was made without the use of copper slag waste, was evaluated for comparative purposes. In order to make the evaluation as comprehensive as possible, the concrete made with the use of three types of cement was subjected to the assessment: CEM I, CEM II and CEM III. The results show that in both approaches the best result was achieved by concrete with CEM III cement. If natural radioactivity is not taken into account in the evaluation, the best result is obtained by concrete made with copper slag waste, and if radioactivity is considered, the best result is obtained with concrete without addition of the waste. It follows from the above that although natural radioactivity has a significant impact on the EIPI evaluation result, the decisive factor is still the type of cement.

Global waste generation keeps increasing over the year and requires innovative solutions to minimize their impacts on environmental quality and public health. Predicted 2.2 billion tonnes per year of global municipal waste generation in the year 2025 which 1.6 fold is higher than in 2012. Hence, a strategic plan must be ascertained to overcome the future challenges of MSW locally and globally. Universiti Putra Malaysia (UPM) coined an initiative to demonstrate a showcase pilot plant for green energy production from MSW. Therefore, the data was obtained from the survey and actual sampling within the UPM compound to estimate the MSW generated and it's potentially used for green energy production. It is estimated that 5.0 – 7.0 tonne per day of MSW generated which about 30 - 35% is an organic fraction. Upon separation, the organic fractions were digested into biogas through anaerobic. At the maximum conversion of organic fraction, about 775 kWh of electricity may able to generate from the waste. In this study, the complete biorefinery setup and utilize organic components from the MSW generated in UPM was proposed that the biogas subsequently will be used to produce green energy in the form of electricity or cooking fuel.

Samples of sunflower Waste Cooking Oils (WCOs) subjected to several cycles of frying were treated with water under four different combinations of temperature and pH. The variation of the chemical composition of the oil samples was monitored through headspace Solid-Phase Microextraction (HS-SPME) coupled with gas-chromatographic technique (GC), ¹H NMR spectroscopy and ESI⁺ mass spectrometry measurements. The possibility to modify the chemical composition of the recycled vegetable oil by tuning the water treatment parameters was exploited for the designing of a mini-plant for the production of bio-lubricants. A full description of the proposed prototype is also reported.

This study evaluates the feasibility of stabilizing clay bricks with marble cutting waste (MCW). This waste currently discarded in huge quantities as a sludge resulted from sawing the marble blocks to slabs, grinding and polishing of marble processes to the landfills located around the marble processing factories located in the Shaq El-Thoban industrial zone, Cairo governorate, Egypt causing negative impacts on the environment, health and sustainable development. Experimental investigations were carried out to explore the effect of addition of the MCW in different clay-base mixes at different percentages up to 25% at the expense of the hydrated lime. Cement, hydrated lime and MCW are the three types of solidification agents used, clay and sand were also added in the formulations of the unfired clay brick specimens. Laboratory cylindrical stabilized and compressed specimens were made, and then they were cured in a humidity chamber for 2 and 4 weeks, then after were air dried, tested and evaluated according to the Egyptian code for the building by the stabilized and compressed earth soil (ECBS, 2016). To enhance the durability of the cured specimens, transparent silicon – based paint was used for this purpose. The laboratory results demonstrate high potential usage of MCW based additives up to 15% incorporating HL. In addition, the used paint could be an effective treatment way for the use of stabilized bricks in a wet environment. The use of eco-friendly building materials will be a great contribution for the environmental advantages and suggest a remarkable economical alternative to the fired building units.

A study was carried out in a Waste Sorting Plant (WSP) located in France and treating dry recyclable household waste (DRHW) as well as dry recyclable commercial and industrial waste (DRCIW). The aim was to investigate the exposure to bioaerosol and dust. The aim of the study was to assess the extent to which the measurement of concentration, species composition and particle size distribution can contribute to a better assessment of the biological risks associated with exposure. Both stationary and personal bioaerosol and dust samples were collect in the (WSP). The results confirm that waste and waste sorting activities are sources of airborne fungi. Indeed, ambient concentrations ranged from 7.3×103 to 8.5×105 CFU/m3 for culturable moulds and up to up to 4 mg/m3 for dust. Personal exposure to inhalable dust was found up to 3 mg/m3 for dust and ranged from 8.6×103 to 1.5×106 CFU/m3 for fungi. Airborne fungal communities were found to be dominated by the Penicillium genera in both bioaerosols and settled dust samples, followed by the Aspergillus, Cladosporium, Wallemia, Mucor, and Rhizopus genera. Fungi were carried by particles of aerodynamic diameters mainly between around 2.0 and 10.0 µm. The findings dealing with size distribution and biodiversity of bioaerosols suggest that employees are exposed to complex bioaerosols during their work and helps to make a finer diagnosis of the risks involved, which is often difficult in the absence of any OEL for bioaerosols in general.

In this study, the effects of food waste (FW) compost, vermicompost, and chemical fertilizers on the growth of organic red radish and soil quality are investigated to promote sustainable agriculture. Utilizing a comparative approach, it assesses the impacts of these fertilizers on various plant growth metrics and soil characteristics, highlighting the potential of converting FW into nutrient-rich amendments as a sustainable alternative to chemical fertilizers. The results indicate a significant variation in fresh weight among different treatments. For example, the FV 25% treatment demonstrated a relatively high mean fresh weight of 7.9664, while the CO 50% treatment yielded a much lower mean fresh weight of 0.2589. These numbers underscore the potential efficacy of specific FW treatments in enhancing plant growth, with VC 50% and FV 25% showing considerable promise in increasing crop yield. The study concludes that FW compost and vermicompost significantly enhance plant growth and soil quality, advocating for their use as sustainable and environmentally friendly alternatives to chemical fertilizers. The findings emphasize the importance of selecting appropriate fertilizer types and concentrations to optimize agricultural productivity and environmental sustainability, supporting the incorporation of FW into agricultural systems as a beneficial resource.

In the field of nasal delivery, one of the most fascinating applications is the delivery of drugs directly to the central nervous system bypassing the blood brain barrier. This approach would provide a series of benefits, such as dose lowering and direct targeting of potent drugs, ultimately reducing their systemic side effects. Recently, clinical trials have explored the nasal administration of insulin for the treatment of Alzheimer’s disease, with promising results. The use of nanomedicines could provide further options for making nose-to-brain delivery reality. In particular, apart from the selection of devices able to deposit the formulation in the upper part of the nose, surface modification of these nanomedicines appears the key strategy to optimize the delivery of drugs from the nasal cavity to the brain. In this review, nanomedicines delivery approaches based on surface electrostatic charges, mucoadhesive polymers, as well as chemical moieties targeting nasal epithelium, will be discussed and critically evaluated for nose-to-brain delivery.

Recent publications on acoustic MEMS transducers present a new three-dimensional folded diaphragm that utilizes buried in-plane vibrating structures to increase the active area from a small chip volume. Characterization of the mechanical properties plays a key role in the development of new MEMS transducers, whereby established measurement methods are usually tailored to structures close to the sample surface. In order to access the lateral vibrations, extensive and destructive sample preparation is required. This work presents a new passive measurement technique that combines acoustic transmission measurements and Lumped-element modelling. For diaphragms of different lengths, compliances between 0.08 ∙ 10-15 and 1.04 ∙ 10-15 m³/Pa are determined without using destructive or complex preparations. In particular, for lengths above 1000 µm, the results differ from numerical simulations only by 4% or less.

Given the conceptual confusion between resilience and sustainability in organizations in the literature, the present study reviews the 27-year global literature on resilience and sustainability in organizations to clarify the relationship between the two, and derive a framework as cutting-edge knowledge on how to ensure resilience and sustainability in organizations. Findings uncover five schools of thought: Sustainable Business Strategy, Predictive Analytics, Sustainable Supply Chain, Ecological Resilience and Sustainable Leadership. A cutting-edge framework, comprising sustainability practices, sustainability outputs, sustainability and resilience outcomes, is derived to guide future research and inform practitioners on how to ensure resilience and sustainability in their organizations.

The present research focuses on the endogenous development theory and investigates the relationship between economic growth (dependent variable) and renewable energy consumption, technological innovation, and export diversification (independent variables) in seven emerging economies known as the E-7. Previous studies have examined these factors individually but have not explored their combined impact on the E-7 economies. Therefore, this study contributes to the existing literature on the effects of renewable energy consumption, technological advancement, and export diversification on economic development. The study analyses the dynamic connection among these variables in seven selected emerging countries: Brazil, China, Indonesia, India, Mexico, Russia, and Turkey. Panel data from 1990 to 2022 is utilized, and various methodologies, including panel cointegration, the PMG-ARDL estimator, and robustness tests such as FMOLS and DOLS, are employed. Empirical inferences are drawn using the Dumitrescu-Hurlin Panel Causality (DHC) test, and the long-run relationships among the variables are validated using the Westerlund residual cointegration tests. The results from the PMG-ARDL estimator show that renewable energy consumption, technological advancement, and export diversification have a significant and positive impact on economic expansion, confirming the validity of the endogenous growth model in the E-7 countries. The control variable of the financial sector has a positive but insignificant effect on economic growth, while trade openness has a negative and significant effect. The DHC test results indicate a neutral feedback effect of renewable energy consumption on economic growth. The findings also reveal a unidirectional causal relationship between technological innovation and economic growth. Overall, these findings provide valuable insights for economic policymakers in the E-7 countries. By removing barriers to renewable energy consumption, technological innovation, and export diversification, policymakers can promote sustainable economic development.

This study examines the effects of working capital management strategies on firm’s financial performance of Indian cement companies using 11-year (2010-2020) financial data of 31 companies listed in Bombay Stock Exchange. It is intended to find out whether the strategies made by finance managers with respect to the components of working capital such as average receivable period, inventory conversion period, average payment period and cash conversion cycle, etc. affects the firm’s performances individually and in total. The results of Pearson’s correlation coefficient and random effect regression model shows that there exists a negative relationship between financial performance measured in terms of return on assets (ROA) and inventory turnover period (ITP) as well as accounts payable period (APP), whereas firm’s performance is not significantly affected by accounts receivable period (ARP) and cash conversion cycle (CCC). Similarly, it has been observed that the liquidity measures such as current ratio (CR) and quick ratio (QR) have a significant positive association with ROA. Moreover, the size of the firms and leverage are inversely related to ROA but the age of the firms is not significantly affecting their financial performances. Hence, it can be concluded that how an organisation designs its working capital strategy do have an impact on its performances.

Hidradenitis suppurativa and Langerhans cell histiocytosis are rare disorders that can reveal similar clinical manifestations, making differential diagnosis difficult. A definitive diagnosis requires biopsy and histological confirmation in suspicious cases. The complex pathophysiology of these diseases has still not been understood, therefore the treatment is still a challenge for physicians. It is seen with predilection in the intertriginous areas of the body, predominantly in the axillary region, rarely requiring a surgical procedure. However perineal, perianal, and gluteal HS usually necessitates some form of surgical treatment. Langerhans cell histiocytosis (histiocytosis X) is a very rare systemic disease manifested by clonal cell proliferation of histiocytic-dendritic nature, with pseudonodular manifestation that deeply infiltrates the hypodermis and ulcerates the epidermis on the surface. Langerhans cells are dendritic, antigen-presenting cells localized in the suprabasal regions of the squamous epithelium of the skin and mucous membranes, which help regulate the immune system. In this report, we present our experience with extensive gluteal, perineal, and perianal hidradenitis suppurativa and Langerhans cell histiocytosis cases, including our treatment methods and outcomes.

Understanding the subtle signs of carpal instability and other unique injury patterns in the wrist is a critical skill for radiologists. Proper patient management and outcomes are directly dependent on the accurate interpretation of wrist imaging studies. This review will provide a detailed overview of typical imaging features of carpal trauma and instability, management, and complications, using multimodality imaging and original medical illustrations. A detailed overview of the osseous, ligamentous, arterial anatomy of the wrist, arcs of Gilula, and zones of vulnerability will be provided. Carpal fractures, dislocations, special radiographic views, and imaging pearls will be discussed. Instability patterns and the myriad of associate abbreviations (CID, CIND, CIC, CIA, VISI, DISI, SLD, LTD, MCI, SLAC, SNAC) will be clarified. Expected outcomes, potential complications, and management will be reviewed.

The Kenya Forestry Service permits rental of low-density national forest areas for use as common farmland, but public access to such areas is restricted to prevent deforestation against a background of rising demand for fuel wood. This study was conducted to clarify characteristics relating to the production of indigenous bamboo (a useful wood resource) by the approximately 23% of locals who work on common farmland in central Kenya’s Kamae forest management area, with estimation to determine above-ground biomass. The results showed that bamboo still represents 60% of such biomass, indicating sustainability in the industry.

Tinnitus is a complex and heterogeneous psycho-physiological disorder responsible for causing a phantom ringing or buzzing sound albeit the absence of an external sound source. It has a direct influence on affecting the quality of life of its sufferers. Despite being around for a while, there hasn’t been a cure for tinnitus, and the usual course of action for its treatment involves use of tinnitus retaining and sound therapy, or Cognitive Behavioral Therapy (CBT). One positive aspect about these therapies is that they can be administered face-to-face as well as delivered via internet or smartphone. Smartphones are especially helpful as they are highly personalized devices, and offer a well-established ecosystem of apps, accessible via respective marketplaces of differing mobile platforms. Note that current therapeutic treatments such as CBT have shown to be effective in suppressing the tinnitus symptoms when administered face-to-face, their effectiveness when being delivered using smartphones is not known so far. A quick search on the prominent market places of popular mobile platforms (Android and iOS) yielded roughly 250 smartphone apps offering tinnitus-related therapies and tinnitus management. As this number is expected to steadily increase due to high interest in smartphone app development, a contemporary review of such apps is crucial. In this paper, we aim to review scientific studies validating the smartphone apps, particularly to test their effectiveness in tinnitus management and treatment. We use the PRISMA guidelines for systematic identification of studies on major scientific literature sources and delineate the outcomes of identified studies.

The production of municipal solid waste incineration bottom ash (MSWIBA) is very massive and has the potential to replace cement despite the problems of complex composition, uneven particle size distribution, and low reactivity. This paper adopts sodium silicate activation of MSWIBA-slag to improve the reactivity to prepare composite cementitious materials. It explores the hydration performance study of the composite cementitious materials by isothermal calorimetric analysis, Fourier Transform Infrared (FTIR) spectroscopy, XRD physical diffraction analysis, and SEM/EDS tests. SEM/EDS tests will be used to explore the hydration properties of the composite gelling. The results showed that with the increase of MSWIBA doping, the porosity between the materials increased, the degree of Hydration decreased, and the compressive strength decreased with the rise of MSWIBA. When sodium silicate increased from 25% to 35%, too much alkaline material occurred over the alkaline effect, which inhibited the Hydration of the particles, and the degree of hydration reaction decreased, and the compressive strength decreased accordingly; the exothermic process of Hydration can be mainly divided into five stages, quartz and calcite did not participate in the hydration reaction completely, and sexual aluminum participated in the hydration reaction. The vibrational peaks of Si-O-Ti (T = Si and Al) were present in the material. The vibrational peaks of XRD, FTIR, and SEM-EDS all indicate the presence of silica-aluminate network structures in the hydration products, mainly N-A-S-H and C-A-S-H gels.

Quarry waste fines and eggshells are unavoidable wastes which relentlessly contribute to environmental load and pollution. Although a number of studies have suggested various methods for recycling, these wastes remain underutilized due to some technical constraints. In addition, no study has yet been explored on the possibility of combining quarry waste fines (QWF) and eggshell powder (ESP) for tobermorite synthesis. Tobermorite is the main component which primarily provides strength to the autoclaved aerated concrete products. For this purpose, this study seeks to evaluate the potential of QWF- ESP mix at 10%, 15% and 20% amounts of cement, respectively. The XRF, XRD, and TGA–DTA techniques were used to characterize the waste materials while physical and mechanical property tests and XRD analysis were performed on the autoclaved samples. It was found that QWF contains 53.77% SiO2, while ESP contains 97.8% CaO which are key components for tobermorite synthesis. This study also revealed that the mixture with only 10% cement has the highest compressive strength among the QWF-ESP samples. Furthermore, the formation of tobermorite in the samples was confirmed through XRD analysis. Hence, the hydrothermal curing of QWF –ESP can be further developed to produce functional tobermorite – bearing materials.

This work shows the potential of a new way of co-treatment of domestic wastewater (DWW) and a liquid stream coming from the thermal hydrolysis of the organic fraction of municipal solid waste (OFMSW) mediated by a mixed culture of purple phototrophic bacteria (PPB) capable of assimilating carbon and nutrients from the medium. The biological system is an open single-step process operated under microaerophilic conditions at an oxidative reduction potential (ORP) &lt; 0 mV with a photoperiod of 12/24 h and fed during the light Stage only, so the results can be extrapolated to outdoors open ponds operation by monitoring the ORP. The effluent mostly complies with the discharge values of the Spanish legislation in COD and P values (&lt;125mg/L &lt;2 mg/L), respectively, and punctually on values in N (&lt;15mg/L). Applying an HRT of 3 d and a ratio of 100:7 (COD:N), the presence of PPB in the mixed culture surpassed 50% of 16S rRNA gene copies, removing 78% of COD, 53% of N and 66% of P. Furthermore, increasing the HRT to 5 d, removal efficiencies of 83% of COD, 65% of N and 91% of P were achieved. In addition, the reactors were further operated in a membrane bioreactor, thus separating the HRT from the SRT to increase the specific loading rate. Very satisfactory removal efficiencies were achieved by applying HRT and SRT of 2.3 and 3 d, respectively: 84% of COD, 49% of N and 93% of P despite low presence of PPB due to more oxidative conditions, which anyway step-by-step re-colonized the mixed culture until reaching &gt;20% of 16S rRNA gene copies after 49 d of operation. These results open the door to scale up the process in open photobioreactors capable of treating urban wastewater and municipal solid waste in a single stage and under microaerophilic conditions by controlling the ORP of the system. This novel urban biorefinery allows reducing treatment costs of two urban wastes and embed them in the circular bioeconomy through water recycling and valorizing PPB biomass as a source of carbon, nitrogen and phosphorus.

According to circular economy principles, the recycling and reuse of waste tyre rubber is one of the most advanced and ecological waste disposal technologies. Each year about 19 million tons of tyres are produced, and this amount is increasing each year. One of the most innovative ways to recycle rubber waste is devulcanization. There are many methods of rubber devulcanization, but the most popular are grinding and chemical. In this article devulcanized rubber granules were used for the preparation of rubber samples. Two of them were obtained by the grinding method and one by chemical devulcanization. 15 different rubber samples were produced for the experimental measurements. Multilayer constructions with two solid layers of plasterboard on both sides (GKB and GKFI) and porous acoustic material of rubber sample inside were produced. Measurements were made in an impedance tube and compared with the results of TMM analysis. The same trends of resonant frequencies were determined. According to the results, the resonant frequencies depended on the thickness of the material, since transmission loss values depended on the mass of construction. According to the test results of transmission loss, constructions with 50mm thick rubber samples had on average 3dB better results than the structures with 25mm samples and 5dB better results than structures with 12 mm thick rubber samples. In addition, it was found that higher density plasterboards (GKFI) increased the overall transmission loss value of the structure by 5 dB. The same trends were determined by the TMM method. The test results showed that multi-layered constructions with devulcanized waste rubber had high transmission loss result and could be used for sound insulating structures.

In many developing countries, plastic waste management is left to citizens. This usually results in hazardous landfilling or open-air burning, leading to emissions that are harmful to human health and the environment. An easy, profitable, and clean method of processing and transforming the waste into value is required. In this context, this study provides an open-source methodology to transform low-density polyethylene drinking water sachets, into pavement blocks by using a streamlined do-it-yourself approach that requires only modest capital. Two different materials, sand, and ashes are evaluated as additives in plastic composites and the mechanical strength of the resulting blocks are tested for different proportion mix of plastic, sand, and ash. The best composite had an elastic modulus of 169MPa, a compressive strength of 29MPa, and a water absorptivity of 2.2%. The composite pavers can be sold at 100% profit while employing workers at 1.5X the minimum wage. In the West African region, this technology has the potential to produce 19 million pavement tiles from 28,000 tons of plastic water sachets annually in Ghana, Nigeria, and Liberia. This can contribute to waste management in the region while generating a gross revenue of 2.85 billion XOF (4.33 million USD).

Computational studies suggest that hesperidin, a flavonoid abundant in citrus peel, binding the three main cellular receptors of SARS-CoV-2 virus can act in the prophylaxis and treatment of COVID-19. Herein we urge the uptake of hydrodynamic cavitation industrial-scale reactors based on the low cost, reliable Venturi tube for the extraction of citrus pectin rich in hesperidin (and in other bioflavonoids including naringing) by very fast processing of waste orange peel or waste lemon peel in water only. A device able to process up to 500 kg of waste peels per session, similar to the one lately deployed in Italy for hydrodynamic cavitation-assisted brewing, is capable to provide 36,000 doses of 1000 mg hesperidin per day.

One way to increase overall natural gas engine efficiency is to transform exhaust waste heat into useful energy by means of a bottoming cycle. Organic Rankine cycle (ORC) is a promising technology to convert medium and low grade waste heat into mechanical power and electricity. This paper presents an energy and exergy analysis of three ORC-Waste heat recovery configurations by using an intermediate thermal oil circuit: Simple ORC (SORC), ORC with Recuperator (RORC) and ORC with Double Pressure (DORC), and Cyclohexane, Toluene and Acetone have been proposed as working fluids. An energy and exergy thermodynamic model is proposed to evaluate each configuration performance, while available exhaust thermal energy variation under different engine loads was determined through an experimentally validated mathematical model. Additionally, the effect of evaportating pressure on net power output , absolute thermal efficiency increase, absolute specific fuel consumption decrease, overall energy conversion efficiency, and component exergy destruction is also investigated. Results evidence an improvement in operational performance for heat recovery through RORC with Toluene at an evaporation pressure of 3.4 MPa, achieving 146.25 kW of net power output, 11.58% of overall conversion efficiency, 28.4% of ORC thermal efficiency, and an specific fuel consumption reduction of 7.67% at a 1482 rpm engine speed, a 120.2 L/min natural gas Flow, 1.784 lambda, and 1758.77 kW mechanical engine power.

Abstract Background: Occipital neuralgia is a debilitating condition and traditional treatments often provide limited or temporary relief. Recently, ultrasound-guided hydrodissection of the greater occipital nerve (GON) has emerged as a promising minimally invasive approach. Objectives: To describe two novel ultrasound-guided hydrodissection with 5% dextrose for GON and discuss their advantages, disadvantages, and considerations. Methods: Two case reports are presented. Case 1 describes a lateral decubitus approach for hydrodissecting the GON between the semispinalis capitis (SSC) and obliquus capitis inferior (OCI) muscles. Case 2 details a cranial-to-caudal approach for hydrodissecting the GON within the SSC and upper trapezius (UT) muscles when the GON pass through these two muscles. Results: Both patients experienced significant and sustained pain relief with improvements in function and quality of life. Conclusions: Ultrasound-guided GON hydrodissection using 5% dextrose is a promising treatment for occipital neuralgia. The lateral decubitus and cranial to caudal approaches provide additional options to address patient-specific anatomical considerations and preferences.

The Interdisciplinary Canadian Collaborative ME Research Network (ICanCME), established in 2019, aims to foster research in Canada and contribute to finding the causes and possible treatments for myalgic encephalomyelitis /chronic fatigue syndrome (ME/CFS), thereby reducing the impact of ME/CFS on the health of Canadians. The main objectives of this paper are to suggest standards for ME/CFS research for the collection of data from participants (Recommended Data Elements) and to consider other factors, such as design, language, cultural issues, equity, and diversity. Consensus of the relevant contents of this research guideline was reached during the ICanCME working group meetings and were based on existing guidelines. Members of the working group contributed to guideline development based on their respective expertise. The proposed research guidelines could improve research quality and advance knowledge in the field of ME/CFS, and ultimately benefit ME/CFS patients.

Accurate estimation of livestock carrying capacity (LCC) and implementing an appropriate actual stocking rate (ASR) is key to sustainable management of grazing adapted alpine grassland ecosystems. Reliable determination of aboveground biomass is fundamental to these determinations. Peak aboveground biomass (AGBP) captured from satellite data at the peak of the growing season (POS) is widely used as a proxy for annual aboveground biomass (AGBA) to estimate LCC of grasslands. Here we demonstrate limitations of this approach and highlight the ability of POS in the estimation of ASR. We develop and trail new approaches that incorporate remote sensing phenology timings of grassland response to grazing activity, considering relations between biomass growth and consumption dynamics, in efforts to support more accurate and reliable estimation of LCC and ASR. Results show that based on averaged values from large-scale studies of alpine grassland on the Qinghai-Tibet Plateau (QTP), differences between AGBP and AGBA underestimate LCC by about 31%. Findings from a smaller-scale study that incorporate phenology timings into estimation of annual aboveground biomass reveal that Haibei alpine meadows were overgrazed by 11.5% during the study period from 2000-2005. The methods proposed can be extended to map grassland grazing pressure by predicting LCC and tracking ASR, thereby improving sustainable resource use in alpine grasslands.

Subacute rumen acidosis (SARA) is a prevalent issue in intensive livestock farming, particularly associated with high-concentrate diets. This study investigates the prevalence and impact of SARA in Greek dairy sheep farming and explores the use of computerized rumen colorimetry as a management and diagnostic tool for SARA in dairy sheep farms. Forty-two dairy sheep flocks were monitored regularly for rumen pH, milk composition, and milk yield over an approximately 9-month milking period. Computerized Rumen Mucosal Colorimetry was applied to 280 culled, aged ewes from these farms, with rumen wall samples taken for histological examination. SARA cases were identified in 19 farms (45%, n=48). Farms with SARA cases had lower milk fat levels, although milk yield was higher in these farms, while milk protein levels did not differ based on the SARA status of the farms. In culled ewes, rumen color was significantly associated with the farm's SARA status. Additionally, ewes from farms with more SARA cases exhibited increased thickness in the ruminal epithelium layers, particularly in the non-keratinized and total epithelium layers. In conclusion, SARA is a common disorder in the Greek dairy sheep industry, lowering the fat content of milk. The study suggests that computerized rumen epithelium colorimetry in aged culled ewes shows promise as a diagnostic tool for SARA in dairy sheep farms.

This study aims to get growth and feed efficiency of Nile tilapia (Oreochromis niloticus) with plant oils supplement from paring coconut (P.C.) and candlenut (C.N.) enrichment of Se in rations formula. The oil of P.C. was dominated by saturated fatty acid (SFA) lauric (42.67%), while the extract of C.N. was unsaturated fatty acids (UFA), linoleic (34.4%), and oleic (48.99%). The extract of P.C. and C.N. or mix oils added 4% in basal ration formula (28% crude protein (C.P.) with energy-protein ratio 8 kcal/kg). Completely Randomized Design (6 × 3) consists R1: basal ration; R2: basal formula with blend of paring coconut and candlenut oils (2% PC + 2% CN); R3: blend oils (R2) with trace additive Se; R4: 4% PC + Se; R5: 4% CN + Se; R6: control ration (32% CP). The result of production parameters showed that blend oils supplement enrichment Se 0.15 ppm in feed formula with ratio SFA: UFA = 1: 1 was the best growth rate equal with high protein feed. Feed efficiency ranged from 50.14-57.93% and protein efficiency ratio 1.72-2.06 both for CN oil (SFA: UFA = 1 : 2), paring coconut (SFA : UFA = 2 : 1) or blend oils (SFA : UFA = 1 : 1). Incorporation of blend oils with Se can be used for Nile tilapia fingerlings (≥ 10 g). Paring coconut oil was trend increasing on feed efficiency for tilapia bigger stadium (≥ 30 g).

The Smart Energy Research Lab (SERL) Observatory dataset described here comprises half-hourly and daily electricity and gas data, SERL survey data, Energy Performance Certificate (EPC) input data and 24 local hourly climate reanalysis variables from the European Centre for Medium-Range Weather Forecasts (ECMWF) for over 13,000 households in Great Britain (GB). Participants were recruited in September 2019, September 2020 and January 2021 and their smart meter data are collected from up to one year prior to sign up. Data collection will continue until at least August 2022, and longer if funding allows. Survey data relating to the dwelling, appliances, household demographics and attitudes was collected at sign up. Data are linked at the household level and UK-based academic researchers can apply for access within a secure virtual environment for research projects in the public interest. This is a data descriptor paper describing how the data was collected, the variables available and the representativeness of the sample compared to national estimates. It is intended as a guide for researchers working with or considering using the SERL Observatory dataset, or simply looking to learn more about it.

The delivery of Cytochrome c (Cyt c) to the cytosol stimulates apoptosis in cells were its release from mitochondria and apoptosis induction is inhibited. We developed a drug delivery system consisting of Cyt c nanoparticles decorated with folate-poly(ethylene glycol)-poly(lactic-co-glycolic acid)-thiol (FA-PEG-PLGA-SH) to deliver Cyt c into cancer cells and test their targeting in the Lewis Lung Carcinoma (LLC) mouse model. Cyt c-PLGA-PEG-FA nanoparticles (NPs) of 253 ± 55 and 354 ± 11 nm were obtained by Cyt c nanoprecipitation, followed by surface decoration with the co-polymer SH-PLGA-PEG-FA, and compared to a nanoparticle-free formulation. Overexpression of FA in LLC cells and internalization of Cyt c-PLGA-PEG-FA nanoparticles (NPs) was confirmed by confocal microscopy. Caspase activation assays show NPs retain 88-96% Cyt c activity. The NP formulations were more efficient in decreasing LLC cell viability than the NP-free formulation, with IC50: 49.2 to 70.1 μg/ml versus 129.5 μg/ml, respectively. Our NP system is thrice as selective towards cancerous than normal cells. In-vivo studies using tagged nanoparticles show accumulation in mouse LLC tumor 5 min post-injection. In conclusion, our NP delivery system for Cyt c shows superiority over the NP-free formulation and reaches a folic acid-overexpressing tumor in an immune-competent animal model.

In data-scarce regions, prudent planning and precise decision-making for sustainable development especially in agriculture remains a challenging task due to the lack of correct information. Remotely sensed satellite images provide a powerful source for assessing land use land cover (LULC) classes and crop identification. Applying Remote Sensing (RS) in conjunction with the Geographical Information System (GIS) and modern tools/ algorithms of artificial intelligence (AI) and deep learning has been proven effective for strategic planning and integrated resources management. The (this)study was conducted in the canal command area of the Lower Chenab Canal system in Punjab, Pakistan. Crop features/ classes were assessed using the Normalized Difference Vegetation Index (NDVI) algorithm. The MODIS (Moderate Resolution Imaging Spectroradiometer) 250 m and Landsat 5 TM (thematic mapper) images were deployed for NDVI time-series analysis with unsupervised classification technique to get LULC classes that helped to discern cropping pattern, crop rotation, and the area of specific crops, which were then used as a key input for agricultural mechanization planning and resources management. The accuracy of the LULC map was 78%, assessed by the error matrix approach. Limitations of high-resolution RS data availability and the accuracy of the results are the concerns observed in this study that could be managed by the availability of good quality local sources and advanced techniques of processing, which will make it more useful and applicable for regional agriculture and environmental management.

In the future, smart cities will provide key services including seamless communication, intelligent transport systems, advanced healthcare platforms, urban and infrastructure management, and digital services for local and regional government. Therefore, a new service and networking paradigm, called the Intelligent Edge Environment, has been specified. and is known as the Intelligent Edge Environment. As a key part of this system, a new secure service ecosystem must be developed to provide the secure realtime movement of services on different High-Performance Edge Cloud Systems. This paper explores these issues by introducing the following mechanisms: the Resource Allocation Algorithm, the Resource Allocation Secure Protocol and finally the Secure Service Protocols. These systems were integrated into the Basic Capabilities System Library and a multithreaded FUSE client connected to the Service Management Framework. Docker was used as a migration mechanism. A prototype was developed and implemented using a FUSE-Network Memory System in which the Network Memory Server was migrated as users move around. The result shows that this approach was safe and could be used to develop new applications and services for smart cities.

Some business license commitments in online single submission (OSS) currently only consist of an independent statement from the business actor, and there is no time limit for fulfilling the license, especially for low-risk bio-business licenses. Therefore, a system design is needed to monitor the fulfillment of business license commitments and to provide confidence to the public regarding the business provided. The system design started with discussing the importance of smart governance tools, defining the requirements for monitoring the commitment of bio-business licenses, selecting documents, determining important words and document types, and proposing a design. This research produces a prototype of a business license monitoring system. This smart governance tool checks the validity of business license documents. The proposed smart governance tool will overcome the complexity of the integration process for fulfilling business licenses from the Indonesian government units or agency systems with the OSS system. Apart from that, it is also very effective by looking at the thousands of government applications that currently exist and the desire to become one application solution that contains many functions that can fulfill the many needs of business actors for simple and transparent business licenses.

The fractal dimension of is identified in this paper. More importantly, the undertaken research has shown how affects the Koch snowflake . The study has demonstrated the existence of negative values of (Koch snowflake), which connects to a considerable number of extremely intriguing mathematical and physical research areas. The information-theoretic impact on the Sierpiniski Gasket dimension , which corresponds to , was treated in a more fundamental way. Notably, the credibility of this current study adds to the existing kThe fractal dimension of is identified in this paper. More importantly, the undertaken research has shown how affects the Koch snowflake . The study has demonstrated the existence of negative values of (Koch snowflake), which connects to a considerable number of extremely intriguing mathematical and physical research areas. The information-theoretic impact on the Sierpiniski Gasket dimension , which corresponds to , was treated in a more fundamental way. Notably, the credibility of this current study adds to the existing knowledge for the information- theoretic fractal dimensions. On another applicative note, this paper offers some potential applications of fractal dimension to smart cities. The investigation of the threshold theorems for and in terms of the triad is part of the next study phase. Additionally, investigating the newly obtained 's corresponding arbitrary Sierpinski Gasket for the first time.applicative note, this paper offers some potential applications of fractal dimension to smart cities. The investigation of the threshold theorems for and in terms of the triad is part of the next study phase. Additionally, investigating the newly obtained 's corresponding arbitrary Sierpinski Gasket for the first time.

The background of this work is related to the scheduling of household appliances, taking into account variations in energy costs during the day, due to official Brazilian domestic tariffs: constant and white. The white tariff can reach an average price of around 17\% lower than the constant, but charges twice its value at peak hours. In addition to cost reduction, we propose a methodology to reduce user discomfort due to time shifting of controllable devices, presenting a balanced solution through the analytical analysis of a new method here called tariff space, derived from white tariff posts. To achieve this goal, we explore the geometric properties of the movement of devices through the tariff space (geometric locus of the load), over which we can define a limited region in which the cost of a load under the white tariff will be equal to or less than the constant tariff. As a trial for the efficiency of this new methodology, we collected some benchmarks (such as execution time and memory usage) against a classic multi-objective algorithm (Hierarchical) available in the language portfolio in which the project has been executed (Julia language). As a result, both methodologies achieve similar results, but the one presented in this article shows a significant reduction in processing time and memory usage, which could lead to the future implementation of the solution in a simple, low-cost embedded system like an ARM cortex M.

With the breakthroughs and innovative developments in nanotechnology, research on the application of nanomedicine in cancer therapy has so far seen tremendous expansion and success. Intelligent stimulus-responsive nanocarriers are an emerging field of research and have great interest in cancer therapy owing to the fascinating properties such as excellent targeting function, high drug loading capacity, and targeted on-demand release properties. Responsive nanomaterials can be designed and constructed according to the dosing context and therapeutic needs, at the same time, activated by internal bio-stimuli (pH, redox, and enzymes) and/or external stimuli (ultrasound, light, temperature, and magnetic), respectively. What’s more, smart nanocarriers are also utilized for the precise and controllable release of antitumor drugs from cancer tissues and cells to achieve efficient diagnosis and treatment of tumors. Deeply investigated, responsive nanocarriers have attracted considerable attention due to their ability to release precisely at tumor-specific sites. Herein, we review the recent advances of novel stimuli-responsive nanocarriers in the field of cancer therapy. Finally, the challenges and application prospects of smart nanocarriers are further elaborately discussed.

The home is becoming a key location for healthcare delivery, including the use of technology driven by autonomous systems (AS) to monitor and support healthcare plans. Using the example of a smart mirror, this paper describes the outcomes of focus groups with people with multiple sclerosis (MS; n=6) and people who have had a stroke (n=15) to understand their attitudes towards the use of AS for healthcare in the home. We thematic analysis to analyse the data. The results indicate that the use of such technology depends on the level of adaptability and responsiveness to the users’ specific circumstances, including their relationships with the healthcare system. A smart mirror would need to support manual entry, responsive goal setting, effective aggregation of data sources and integration with other technology, have a range of input methods, be supportive rather than prescriptive in messaging, and give the user full control of their data. Barriers to adoption include a perceived lack of portability and practicality, lack of accessibility and inclusivity, a sense of redundancy, being overwhelmed by multiple technological devices, and a lack of trust in data sharing. These results inform the development and deployment of future health technologies based on the lived experiences of people with health conditions who require ongoing care.

Developing a low-cost wireless energy meter with power quality measurement for smart grid applications represents a significant advancement in efficient and accurate electrical energy monitoring.In increasingly complex and interconnected electrical systems, this device is essential in various applications, such as smart grids, enabling real-time energy usage monitoring. In such a context, smart meters expand the possibilities for sustainable and efficient energy use and promote better utilization of energy sources, especially non-renewable ones. According to the 2020 International Energy Agency (IEA) research, non-renewable energy sources represent 65% of the global total. The smart meter developed in this work is built based on the ESP32 microcontroller and easily accessible components, using a user-friendly development platform that offers a cost-effective solution while ensuring reliable performance. The main objective of the smart meter development was to enhance the software and simplify the hardware. Unlike traditional meters that perform electrical parameter calculations using complex hardware circuits, this project performed the calculations directly on the microcontroller. This approach reduced the complexity of the hardware, simplifying the meter’s design. With the high-performance processing capability of the microcontroller, efficient and accurate calculations of electrical parameters were achieved without the need for additional circuits. This software-driven approach with simplified hardware brought benefits such as reduced production costs, lower energy consumption, and increased meter development and updates flexibility. Furthermore, the integrated wireless connectivity in the microcontroller enables the transmission of collected data to remote monitoring systems for later analysis. The developed smart meter offers cost, energy efficiency, and flexibility benefits. It represents an innovative, efficient, and versatile solution for smart grid applications.

The construction industry has witnessed the increasing use of digital tools and smart solutions, particularly, in the realm of buildings energy automation within the concept of smart cities. While to truly realize the potential benefits of smart cities, a broader scope of smart initiatives is required to support the transition from smart buildings towards smart neighbourhoods, appreciated as the critical unit of urban development. To support this interplay of smart solutions between buildings and neighbourhoods, this article aims to collect and review all smart solutions presented in existing scientific articles, technical literature, and realized European projects. These solutions are classified under two main sections of buildings and neighbourhoods, which are investigated through five domains: buildings energy-related uses, renewable energy sources, water, waste, and open space management. Showcasing the quantitative outcomes demonstrates the potential benefits of implementing smart solutions from buildings to neighbourhoods. Moreover, this research concludes that the true enhancement of energy conservation goes beyond the buildings’ energy component and can be genuinely achieved by integrating intelligent elements of the neighbourhood, due to their strong interdependencies. Future research is recommended to focus on assessing the effectiveness of these solutions towards resource conservation.

Bread wheat (Triticum aestivum L.) is one of the world's most important staple food crop providing 20% global energy and dietary proteins. It is widely grown in sub-tropical and tropical areas and as such exposed to heat-stress especially at grain filling period (GFP). Global warming has further affected its production and productivity in these heat-stressed environments. We examined the effect of heat-stress on 18 morpho-physiological and yield-related traits in 96 bread wheat accessions. Heat susceptibility index (HSI <0.60) and yield stability (i <0.55) used as criteria for selecting the tolerant accessions. Heat-stress, imposed by delayed sowing, decreased crop growth and GFP, and as a result reduced morphological and yield-related traits, namely days to 50% anthesis, plant height, peduncle length, flag-leaf area, spike length, spikelets per spike, grain length and width, thousand grain weight (TGW), harvest index and yield. The reduction in the trait values was severe in susceptible accessions (48.2% yield reduction in IC277741) than the tolerant. Physiological traits like chlorophyll content, canopy temperature depression (CTD), normalized difference vegetation index (NDVI), plant waxiness and leaf rolling showed higher expression in the tolerant accessions under heat-stress. Scanning electron microscopy of matured wheat grains revealed ultrastructural changes in endosperm and aleurone cells caused due to heat-stress. The reduction of size and density of large starch granules is the major cause of yield and TGW decrease in the heat-stress susceptible lines. The most stable and high-yielding accessions namely IC566223, IC128454, IC335792, EC576707, IC535176, IC529207, IC446713 and IC416019 were identified as the climate-smart germplasm lines. Germplasm lines possessing desirable traits were selected as po-tential parents for the development of bi-parental and multi-parental populations.

This paper seeks to explore some of the issues to be welcomed but also warned against in general but also specified from an illustrative sample of ‘smart’ projects that caused outcomes that were neither ‘smart’ nor ‘resilient’. These give pointers to a ‘thirdspace’ as a descriptor of the most advanced application of sustainability thinking regarding relational spatial development planning. This contribution examines difficulties in delivering both ‘smart’ and ‘resilient’ responses of interest or value to citizens confronted with recurring crises that derive directly or with implications for sustainability issues. Identified are constraints and issues acting as obstacles to governance, management ‘layering’ and ‘learning’ causing failures of many weak or never-delivered projects. Critiques of static, or worse ‘magical’ thinking are increasingly invoked in consequence. In the analysis of ‘live cases’ all these problems showed up ‘in real life’. The author was pleased that his mentor, the late UCLA planning theorist Ed Soja’s application of the idea of ‘Thirdspace’ received prescient vindication from the results of this adjudication.

Smart primary healthcare building facility services capture a new level of process and operational data through advanced monitoring, enabling experts to use the building facilities to produce significant and efficient healthcare service delivery within the individual spheres of influence. This study assessed the impact of IoT services on achieving smart primary healthcare building facilities in the rural area of South Africa to enhance primary healthcare delivery. The study identified three (3) basic constructs of IoT services that comprised the application of IoT location recognition and tracking services, the application of the IoT high-speed communication network-based services, and the application of IoT-based services. The study is quantitative, and a questionnaire was used to collect data from the project managers and healthcare practitioners working with the primary healthcare agency in South Africa. The study found a variable degree of impact between the three (3) IoT constructs and the achievement of primary healthcare building facility services in South Africa. The study recommends adopting IoT essential services for achieving smart primary healthcare building facility services in the rural areas of South Africa and other developing countries facing similar primary healthcare delivery challenges.

Brinjal is a beautiful vegetable crop with strong nutritional properties specifically folate concentration and total chlorogenic acid content. These vitamins and minerals are very much effective in building up the immune system, whilst chlorogenic acid content protects the human body against heart illnesses, liver issues and diabetes. The quantity of these chemicals changes from cultivar to cultivar largely based upon the location of growth and changing environmental circumstances. Many plant breeding strategies are used to alleviate the losses but have proved to be less successful. Whereas the use of molecular markers and other biotechnology technologies have created a road for creating climate smart brinjal with maximum yields and nutritious contents.

This paper aims to provide the smart grid research community with an open and accessible general mathematical framework to develop and implement optimal flexibility mechanisms in large-scale network applications. The motivation of this paper is twofold. On the one hand, flexibility mechanisms are currently a hot topic of research, which is aimed to mitigate variation and uncertainty of electricity demand and supply in decentralised grids with a high aggregated share of renewables. On the other hand, a large part of such related research is performed by heuristic methods, which are generally inefficient (such methods do not guarantee optimality) and difficult to extrapolate for different use cases. Alternatively, this paper presents an MPC-based (Model Predictive Control) framework explicitly including a generic flexibility mechanism which is easy to particularise to specific strategies such as Demand Response, Flexible Production and Energy Efficiency Services. The proposed framework is benchmarked with other non-optimal control configurations to better show the advantages it provides. The work of this paper is completed by the implementation of a generic use case which aims to further clarify the use of the framework and thus, to ease its adoption by other researchers in their specific flexibility mechanisms applications.

Background: Limited research has been done to measure ambulatory respiratory behavior, in particular those associated with tobacco use, in the natural environment due to a lack of monitoring techniques. Respiratory topography parameters provide useful information for modelling particle deposition in the lung and assessing exposure risk and health effects associated with tobacco use. Commercially available Wearable Respiratory Monitors (WRM), such as the Hexoskin Smart Garment, have embedded sensors which measure chest motion and may be adapted for measuring ambulatory lung volume. Methods: Self-reported ‘everyday’ and ‘some days’ Hookah and Cigarette smokers were recruited for a 3-day natural environment observation study. Participants wore the Hexoskin shirt while using their preferred tobacco product. The shirt was calibrated on them prior to, during, and after the observation period. A novel method for calculating the calibration parameters is presented. Results: N=5 Hookah and N=3 Cigarette participants were enrolled. Calibration parameters were obtained and applied to the observed chest motion waveform from each participant to obtain their lung volume waveform. Respiratory topography parameters were derived from the lung volume waveform. Conclusion: The feasibility of using the Hexoskin for measuring ambulatory respiratory topography parameters in the natural environment is demonstrated..

Smart city infrastructure has a significant impact on improving the quality of humans life. However, a substantial increase in the urban population from the last few years is posing challenges related to resource management, safety, and security. In order to ensure safe mobility and security in the smart city environment, this paper proposes a novel Artificial Intelligence (AI) based approach empowering the authorities to better visualize the threats and to help them identify the highly-reported crime zones yielding greater predictability of crime hot-spots in a smart city. To this end, it first investigates the Hierarchical Density-Based Spatial Clustering of Applications with Noise (HDBSCAN) to detect the hot-spots that have a higher risk of crimes to be committed. Second, for crime prediction, Seasonal Auto-Regressive Integrated Moving Average (SARIMA) exploited in each dense crime region to predict the number of crimes in the future with spatial and temporal information. The proposed HDBSCAN and SARIMA based crime prediction model is evaluated on ten years of crime data (2008-2017) for New York City (NYC). The accuracy of the model is measured by considering different time period scenarios i.e. (a) year-wise, i.e., for each year and (b) for the whole period of ten years, using an 80:20 ratio where 80\% data was used for training and 20\% data was used for testing. The proposed approach outperforms with an average Mean Absolute Error (MAE) of 11.47.

Concerns of food and environmental security have increased enormously in recent years due to the vagaries of climate change and variability. Efforts to promote food security and environmental sustainability often reinforce each other and enable farmers to adapt to and mitigate the impact of climate change and other stresses. Some of these efforts are based on appropriate technologies and practices that restore natural ecosystems and improve the resilience of farming systems, thus enhancing food security. Climate smart agriculture (CSA) principles, for example, translate into a number of locally-devised and applied practices that work simultaneously through contextualised crop-soil-water-nutrient-pest-ecosystem management at a variety of scales. The purpose of this paper is to review concisely the current state-of-the-art literature and ascertain the potential of the Pfumvudza concept to enhance household food security, climate change mitigation and adaptation as it is promoted in Zimbabwe. The study relied heavily on data from print and electronic media. Datasets pertaining to carbon, nitrous oxide and methane storage in soils and crop yield under zero tillage and conventional tillage were compiled. Findings show that, compared to conventional farming, Pfumvudza has great potential to contribute towards household food security and reducing carbon emissions if implemented following the stipulated recommendations. These include among others, adequate land preparation and timely planting and acquiring inputs. However, nitrous oxide emissions tend to increase with reduced tillage and, the use of artificial fertilizers, pesticides and herbicides is environmentally unfriendly.

Due to an increase of the monocrystalline PV systems installations, for a drive towards the sustainable smart cities in the hot arid developing country such as Pakistan, pose challenges of the performance and degradation issues. Monocrystalline PV module efficiencies are declining and damaging under the continuous exposure to higher surface day-time temperatures in the different parts of the country. A MATLAB simulations were performed based on the validated mathematical approach. This paper investigates the hot arid surface temperature impacts on the performance of PV modules during the summer and winter seasons in Pakistan. The investigations are performed examining the power generating efficiency of the PV system. This paper also investigates the influence of installations of PV-system in the North, South, East and West regions of Pakistan. It was examined that the northern areas of Pakistan are more suitable for maintaining the long-term durability of the PV system. Investigations are performed for the peak summer and peak winter days. During summer months, cooling strategies have to be implemented to overcome the heating effects whilst reducing degradation effect on installed PV-system.

The unpredictable increase in electrical demand affects the quality of theenergy throughout the network. A solution to the problem is the increase of distributedgeneration units which burn fossil fuels.While this is an immediate solution to theproblem the ecosystem gets affected by the emission of CO2.A promising solutionis the integration of Distributed Renewable Energy Sources (DRES) to the conventionalelectrical system, thus, introducing the concept of smart microgrids (SMG) that requirea safe, reliable and technically planned two-way communication system. This documentpresents a heuristic based on planning capable of providing a bidirectional communicationnear optimal route map, following the structure of an hybrid Fiber-Wireless (FiWi) with thepurpose of obtaining information of electrical parameters that help us to manage the useof energy by integrating conventional electrical system to SMG. A FiWi network is basedon the integration of wireless access and optical networks. This integration increases thecoverage and reliability at a lower cost. The optimization model is based on clusteringtechniques, through the construction of balanced conglomerates. The method is used forthe development of the clusters along with the Nearest-Neighbor Spanning Tree Algorithm(N-NST). Additionally, Optimal Delay Balancing (ODB) model will be used to minimizethe end to end delay of each grouping. In addition, the heuristic observes real designparameters such as: capacity and coverage. Using the Dijkstra algorithm, the routes arebuilt following the minimum shorter path. Therefore, this paper presents a heuristic able to plan the deployment of smart meters (SMs) through a tree-like hierarchical topology for theintegration of SMG at the lowest cost.

Continuous in-home monitoring of older adults living alone aims to improve their quality of life and independence, by detecting early signs of illness and functional decline or emergency conditions. To meet requirements for technology acceptance by seniors (unobtrusiveness, non-intrusiveness, privacy-preservation), this study presents and discusses a new smart sensor system for the detection of abnormalities during daily activities, based on ultra-wideband radar providing rich, not privacy-sensitive, information useful for sensing both cardiorespiratory and body movements, regardless of ambient lighting conditions and physical obstructions (through-wall sensing). The radar sensing is a very promising technology, enabling the measurement of vital signs and body movements at a distance, and thus meeting both requirements of unobtrusiveness and accuracy. In particular, impulse-radio ultra-wideband radar has attracted considerable attention in recent years thanks to many properties that make it useful for assisted living purposes. The proposed sensing system, evaluated in meaningful assisted living scenarios by involving 30 participants, exhibited the ability to detect vital signs, to discriminate among dangerous situations and activities of daily living, and to accommodate individual physical characteristics and habits. The reported results show that vital signs can be detected also while carrying out daily activities or after a fall event (post-fall phase), with accuracy varying according to the level of movements, reaching up to 95% and 91% in detecting respiration and heart rates, respectively. Similarly, good results were achieved in fall detection by using the micro-motion signature and unsupervised learning, with sensitivity and specificity greater than 97% and 90%, respectively.

The understanding of various health-oriented vital sign data generated from body sensor networks (BSN) and discovery of the association between the generated parameters is an important task that may assist and promote important decision making in healthcare. For example, in a smart home scenario where the occupants’ health status is continuously monitored remotely, it is essential to provide required assistance when an unusual or critical situation is detected in their vital sign data. In this paper, we present an efficient approach to mine the incomplete (partial) periodic patterns obtained from BSN data. In addition, we employ a correlation test on the generated patterns and introduce the productive-associated partial periodic frequent patterns as the set of correlated partial periodical frequent items. The combination of these measures has the advantage of empowering healthcare providers and patients for quality of diagnosis, and also for better treatment and smart care, especially for the elderly people at smart home. We developed an efficient algorithm named PPFP-Growth (Productive Periodic Frequent Pattern growth) to discover all productive associated partial periodic patterns using these measures. PPFP-Growth is efficient, and the productiveness measure removes uncorrelated periodic items. An experimental evaluation on synthetic and real datasets shows the efficiency of the proposed PPFP-Growth algorithm, and can filter a huge number of partial periodic patterns to reveal only the correlated ones.

The smart management of water resources is an increasingly important topic in today's society. In this context, the paradigm of Smart Water Grids (SWGs) aims at a constant monitoring through a network of smart nodes deployed over the water distribution infrastructure. In such a way, a continuous assessment of water quality and state of health of the pipeline infrastructure can be achieved, allowing an early detection of leaks and water contamination. Acoustic wave-based technology has arisen as a viable communication technique among the nodes of the network. Such technology can be suitable to replace traditional wireless networks in SWGs, as the acoustic channel is intrinsically embedded in the water supply network. However, the fluid-filled pipe is one of the most challenging media to be employed for data communication. This paper aims at reviewing those works dealing with acoustic-based communication networks in real large-scale urban water supply networks. An overview on the characteristics, trends and design challenges of existing works is provided as a guideline for future research.