There is a pressing need for tools that can rapidly predict PM2.5 concentrations and assess health impacts under various emission scenarios, aiding in the selection of optimal mitigation strategies. Traditional chemical transport models (CTMs) like CMAQ are accurate but computationally intensive, limiting practical scenario analysis. To address this, we propose a novel method integrating a conditional U-Net surrogate model with health impact assessments, enabling swift estimation of PM2.5 concentrations and related health effects. The U-Net model was trained with 2019 South Korean PM2.5 data, including precursor emissions and boundary conditions. Our model showed high accuracy and significant efficiency, reducing processing times while maintaining reliability. By combining this surrogate model with the EPA’s BenMAP-CE tool, we estimated potential premature deaths under various emission reduction scenarios in South Korea, extending projections to 2050 to account for demographic changes. Additionally, we assessed the required PM2.5 emission reductions needed to counteract the increase in premature deaths due to an aging population. This integrated framework offers an efficient, user-friendly tool that bridges complex air quality modeling with practical policy evaluation, supporting the development of effective strategies to reduce PM2.5-related health risks and estimate economic benefits.

Objective: African Americans (AA) carry the largest burden for almost every type of cancer in the US and are also more likely to die from cancer. Approximately 10% of cancers can be explained by a hereditary factor and detected earlier. Many AA however have inequitable access to hereditary cancer risk assessment (HCRA) tools and information, further exacerbating cancer disparities. Innovative communication strategies to promote community-based HCRA information have promise to bridge AA to optimal primary cancer screening. The current pilot study followed a participatory process where researchers engaged with a Community Advisory Board (CAB) to explore how Communication Asset Mapping could assist Lay Health Advisors with dissemination of evidence-based HCRA information within AA faith communities. Methods: The research team and CAB conducted exploratory community group discussions with residents (N=21) guided by Communication Infrastructure Theory, and a community-engaged mapping process to inform the development of a Communication Asset Mapping (CAM) dissemination strategy. Results: Themes included: (1) Optimal locations (e.g. community centers) within identified networks (specified neighborhood networks) should have representatives who are trusted ambassadors to assist with HCRA information dissemination; (2) Trusted community member voices should fully represent the trusted network; and (3) Well-known and frequented geographic locations should be a true representation of participants’ neighborhoods for creating a robust health information network concerning HCRA. Conclusion: CAB and community residents appreciated the engagement process however, felt the impact was limited due to missing community voices within their neighborhoods to identify communication assets within the network for optimal HCRA information dissemination. CAM therefore is an important public health strategy in identification of trusted networks. The strategy was also helpful in pinpointing people who are critical communicators of emerging health information akin to HCRA.

The rapid proliferation of Internet of Things (IoT) devices has transformed various sectors, from smart homes to industrial systems. However, this growth has introduced significant security risks due to the increased attack surface and diverse nature of IoT devices. This paper presents a comprehensive assessment of IoT security risks and explores effective mitigation strategies. We first categorize the primary risks associated with IoT, including data breaches, device manipulation, and network vulnerabilities. Using a multi-layered approach, we analyze these risks in different contexts, such as consumer IoT, industrial IoT, and healthcare. The study then reviews existing security frameworks and protocols, highlighting their strengths and limitations. We propose a hybrid mitigation strategy combining encryption, access control, and anomaly detection to enhance IoT security. Furthermore, we discuss the role of regulatory standards and best practices in reinforcing IoT security. The findings underscore the need for a proactive and adaptive security posture to address evolving threats in the IoT landscape.

Cocoa is a natural resource that plays a very important role globally, being one of the most produced and traded commodities. Being a labor-intensive product and considering that its cultivation involves about 50 million people globally, it seems significant to explore its social sustainability. In light of this, this research aimed to map social risks within the cocoa supply chain from a life cycle perspective. Therefore, according to a Reference Scale Approach, or Type I, the Social Life Cycle Assessment was used, considering the two most influential Countries in its production, i.e. Côte d'Ivoire and Ghana. The results showed that there could be a very high risk that more than half of the cocoa globally is produced through child labour and with wages too low to guarantee workers a decent living, returning incomes of $30-38/month. Forced labour is much less frequent than child labour, while cocoa from Ghana may induce a high risk of improper work, considering the 30.2 hours per week worked by farmers. This is mainly due to the low association power of 10-16%, which reveals a high risk that workers may not organize themselves into trade unions. Finally, at 23-25%, there is also a very high risk of discrimination due to the high presence of migrant labour. The S-LCA results, therefore, showed that the cocoa industry is still characterized by socially unsustainable sourcing.

The transition to renewable energy sources is pivotal in addressing the escalating challenges of climate change and environmental degradation. Solar energy, particularly photovoltaic (PV) technology, stands out as a prominent solution due to its potential for clean and sustainable electricity generation with minimal greenhouse gas emissions. However, accurately assessing the carbon footprint of PV modules is essential for guiding policy, industry practices, and research. This paper reviews the state of current literature and highlights the difficulties in estimating the carbon footprint of PV modules manufactured in China. It emphasizes the inherent limitations of Process-Based Life Cycle Assessment (PLCA), including data collection challenges, dynamic environmental changes, and subjective methodological choices. The study underscores the need for improved transparency, standardization, and reproducibility in Life Cycle Assessments (LCAs) to provide more accurate and reliable environmental impact evaluations.

This study aims to quantify greenhouse gas (GHG) emissions from China's sludge treatment industry and explore the potential of novel technologies to mitigate these emissions, promoting sustainable sludge management practices. Using a life cycle assessment approach, the total GHG emissions from sludge treatment in 2017 were estimated at 18.54 Mt CO2-eq, with significant regional variations. Incineration contributed the highest emissions (1,011.53 kg CO2-eq/t dry sludge), followed by landfill (717.51 kg CO2-eq/t) and land application (276.41 kg CO2-eq/t). The uneven distribution of emissions across cities highlights the need for targeted mitigation strategies that consider local sustainability challenges. Principal component analysis revealed that economic factors and treatment scale significantly influence emissions, emphasizing the importance of integrating sustainability goals with economic development. To reduce the carbon footprint of sludge treatment and enhance sustainability, the mitigation potential and costs of various technologies were evaluated, including thermal conversion, anaerobic digestion, hydrothermal processes, and wet oxidation. These technologies offer GHG emission reductions ranging from 0.09 to 0.46 t CO2-eq/t dry solids compared to conventional methods, while also promoting resource recovery and circular economy principles. However, further optimization is necessary to enhance their environmental and economic performance, ensuring long-term sustainability. By implementing these technologies and adopting optimization strategies, China's sludge treatment industry can significantly contribute to achieving the country's carbon neutrality goal and fostering sustainable development.

Previous reviews have investigated machine learning (ML) models used to predict the risk of developing preeclampsia but have not described how the ML models are intended to be deployed throughout pregnancy or feature performance. The aim of this study is to provide an overview of the existing ML models and their intended deployment patterns and performance along with identified features of high importance. This review used the Preferred Reporting Items for Systematic Reviews and Meta-Analyses 2020 guidelines. PubMed, Engineering Village, and the Association for Computing Machinery were searched between January and February 2024. A total of 86 studies were found of which 14 were included. Out of 12 studies, eight showed the intent to use the ML model as a single-use, two intended a dual-use, and two intended multiple-use. A total of seven studies listed the features of the highest importance. Systolic and diastolic blood pressure were listed along with mean arterial pressure to be of high importance. Out of four studies intending to use the ML model more than a single-use, three of them were conducted in the years 2023 and 2024, whereas the remaining study is from 2011. No ML model emerged as superior across the subgroups of PE. Utilizing body mass index and either mean arterial pressure or diastolic blood pressure and systolic blood pressure may benefit the performance. The deployment patterns are mainly single use being within the gestation weeks 11+0 to 14+1.

A pivotal strategy in decarbonizing the transport sector is by transitioning from internal combustion engine vehicles (ICEVs) to electric vehicles (EVs), especially if they are charged with renewable energy. To provide an incentive to the common populace to switch to EVs, cities should set up - or enable or even encourage the private sector to do so - electric vehicle charging stations (EVCS) at multiple and suitably accessible locations. This paper aims to present a digitaltwin-enabled methodology study for selecting the most suitable possible locations to establish EVCS with consideration of the low voltage (LV) network operation in terms of power losses, active and reactive power in EV charging demand and the effect of the EVCS on the transformers, based on examples in Newcastle upon Tyne (England, UK). It also evaluates the most suitable type of charger that could be installed at these locations by studying the estimated traffic, cost and impact of the EVCS on the power grid, both at peak and off hours. This paper demonstrates how digitaltwin technologies, such as the web-based tool AutoDesign by Northern Powergrid and EA Technology and open source Pandapower can be used for identifying the most viable and cost-effective locations to connect EVCSs to a Distribution Network Operators (DNO)’s LV network. The results of the analysis indicate that with the installation of the most suitable type of EVCS in a particular location, the local power grid would not be significantly affected at any hour of the day.

This paper investigates the potential of different fermentation feedstocks towards succinic acid production. Three alternative flowsheets were constructed and modelled in SuperPro Designer™, utilizing different fermentation substrates: crude glycerol (a by-product of the biodiesel industry), a commercial 95% glucose syrup and pure glycerol. Techno-economic analysis of the modelled plants showed that all three potential investments can be economically profitable, with the crude glycerol case as the most promising one. The succinic acid production cost for the crude glycerol scenario is estimated at 3.59 $/kg, while a thorough study of the capacity effect to the economics showed that it could drop as low as $2.6 $/kg. Parametric analysis and optimization performed on a flowsheet level, indicated opportunities for lowering the production cost down to 3 $/kg, a value that could pave the framework for a further potential decrease in the selling price of the product.

The Simultaneous Localization And Mapping (SLAM) scanner is an easy and portable Light Detection And Ranging (LiDAR) data acquisition device. Its main output is a 3D point cloud covering the scanned scene. Regarding the importance of accuracy in the survey domain, this paper aims to assess the accuracy of two SLAM scanners: the NavVis VLX and the BLK2GO Scanner. This assessment is conducted for both outdoor and indoor environments. In this context, two types of reference data are used: the Total Station (TS) and the static scanner Z+F Imager 5016. To carry out the assessment, four comparisons are tested: cloud to cloud, cloud to mesh, mesh to mesh, and edge detection board assessment. However, the results of the assessments confirm that the accuracy of indoor SLAM scanner measurements (5 mm) is greater than that of outdoor ones (between 10 mm and 60 mm). Moreover, the comparison of cloud to cloud provides the best accuracy regarding direct accuracy measurement without manipulations. Finally, based on the high accuracy, scanning speed, flexibility, and the accuracy differences between tested cases, it is confirmed that SLAM scanners are effective tools for data acquisition.

Due to the growth of tourism, mining and manufacturing, economy of the Hainan Island, southern China has swiftly expanded, but also poses a risk of soil pollution by mercury (Hg) due to the traffic and mineral processing. In order to investigate the characteristics of soil Hg pollution in the Hainan Island and assess the health risk, a total of 239 samples were gathered from five representative regions across the island. A vehicle-mounted potable mercury analyzer was used to measure the atmospheric Hg and soil Hg concentrations in the collected samples. The results indicate that the soil Hg concentration of the five sub-study areas exhibits notable fluctuations, which was found to be influenced by various factors, including wind direction, mining activities, and economic development conditions. The degree of Hg pollution was assessed using both the Single Pollution Index Method and the Geoaccumulation Index Method. The results showed that although nearly half of the sampling points were contaminated, the current soil Hg level does not pose a non-carcinogenic risk to human health.

With the development of organizational biology and forced from the EU Cosmetic Regulation (EU/1223/2009) with the complete ban of animal testing for cosmetic purposes, 3D skin models have been widely developed due to their similar physiological structure and metabolic function to native human tissue. 3D skin models for in vitro cosmetic evaluation are still promising alternative methods for evaluating phototoxicity, corrosivity and irritation. These models have been used for early screening and later validation of toxicity and efficacy evaluation by many well-known cosmetic companies. 3D skin models have become an important tool in cosmetic evaluation research. This article reviews the development of 3D skin models and their application in cosmetic evaluation. An outlook on the current application and future technological development directions in the cosmetic field is also presented.

A review of quantitative risk assessment (QRA) models of L. monocytogenes in produce was carried out, with the objective of appraising and contrasting the effectiveness of the control strategies placed along the food chains. Despite nine of the thirteen QRA models recovered focused on fresh or RTE leafy greens, none of them represented important factors or sources of contamination in the primary production, such as type of cultivation, water, fertilisers or irrigation method/practices. Cross-contamination at processing and during consumer’s handling was modelled using transfer rates, which were shown to moderately drive the final risk of listeriosis; highlighting therefore the importance of accurately representing the transfer coefficient parameters. Many QRA models coincided in the fact that temperature fluctuations at retail or temperature abuse at home were key factors contributing to increasing the risk of listeriosis. In addition to a primary module that could help assess current on-farm practices and potential control measures, future QRA models for minimally-processed produce should also contain a refined sanitisation module able to estimate the effectiveness of various sanitisers as a function of type, concentration and exposure time. Finally, L. monocytogenes growth in the products down the supply chain should be estimated by using realistic time-temperature trajectories, and validated microbial kinetic parameters, both of them currently available in the literature.

A review of the published quantitative risk assessment (QRA) models of L. monocytogenes in seafood was performed, with the objective of appraising the effectiveness of the control strategies placed along the food chain. Whereas all the 13 QRA models retrieved were of short scope, covering at most from end of processing to consumption; the majority (85%) focused on smoked or gravad fish. Since the modelled pathways commenced with the packaged product, none of the QRA models addressed cross-contamination events. Many models agreed on the fact that keeping the product’s temperature at 4.0-4.5 ºC leads to greater reductions in the final risk of listeriosis than reducing the shelf life by one week; and that the effectiveness of both measures can be surpassed by reducing the initial occurrence of L. monocytogenes in the product (at the end of processing). It is therefore necessary that future QRA models for RTE seafood contains a processing module that can provide insight into intervention strategies that can retard L. monocytogenes growth, such as the use of bacteriocins, ad-hoc starter cultures and/or organic acids, and other strategies seeking to reduce cross-contamination at the facilities, such as stringent controls for sanitation procedures. Since risk estimates were shown to be moderately driven by growth kinetic parameters, namely, the exponential growth rate, the minimum temperature for growth, and the maximum population density, further work is needed to reduce uncertainties about them.

Air pollution poses a significant risk to public health and ecosystems. The use of sophisticated models to simulate the transformation and dispersion of pollutants in the atmosphere is a recognized method to assess air pollution levels and its sources and inform policy decisions for effective mitigation strategies in urban and industrial environments. The reliability of models depends, in part, on the sensitivity to the variance of input parameters, which can introduce uncertainty into the model's predictions. This uncertainty is especially challenging when the input parameters exhibit inherent variability. In this study, we analyse the uncertainty of an integrated emission/dispersion model by evaluating the relationship between input parameters and model outcomes. We uncover new aspects of this relationship while clarifying some previously known dependencies. Wind speed was found to have the most significant effect on calculated concentrations, with small differences leading to substantial concentration variations. The time of day, which reflects prevailing vertical turbulence conditions, was also found to have a notable impact on concentrations, whereas ambient temperature can also significantly influence model’s results. Based on these findings, we offer specific recommendations for regulators and scientists involved in environmental impact assessment to improve the accuracy and reliability of air pollution modelling.

Behavioural disorders in dogs are common and have severe welfare consequences for dogs. This study aimed to assess the factors that are significant and predictive of behaviour problems in dogs using the Animal Welfare Assessment Grid (AWAG) to further understand what factors influence their welfare. 177 AWAG assessments were undertaken across 129 dogs that clinicians deemed to have a behavioural disorder. Wilcoxon-rank sum tests were used to assess the difference in scores between dogs with behaviour disorders and a cohort of healthy dogs (n=117). This analysis showed that all physical factors besides body condition, all procedural factors besides procedure pain, and all psychological, and environmental factors were significantly different between healthy dogs and dogs with behaviour disorders. Spearman Rank Correlation Coefficient (RS) revealed several significant strong positive correlations including the procedural impact on the dog’s daily routine with aggression towards unfamiliar people and procedure pain, as well as other correlations between the dog’s behaviour during assessment with the frequency at which they encounter fears and anxieties, clinical assessment and procedure pain, and reaction to stressors and social interactions. These findings highlight the interdependent nature of the various influences of welfare. Logistic regression analysis identified that aggression towards the caregiver, fears and anxieties frequency, and choice, control, and predictability were all significant predictors of behaviour disorders. The findings have important implications for veterinary, behaviour, and animal welfare professionals as any changes across these factors may indicate poor welfare linked to emotional disorders in dogs.

Achieving sustainable development will require improved water management, but the main framework to address it, Integrated Water Resources Management (IWRM), lacks clarity and acceptance among a diverse community of many stakeholders. This creates communication problems and obscures issues that people care about like drinking water and pollution prevention. As a process within IWRM, the concept of water resources assessment also suffers from a lack of clarity, which leads to ambiguity and reports that are too general to lead to action. This lack of acceptance of IWRM and water resources assessment saps support for essential data collection, analysis, and reporting. Clarifying IWRM will require work within the water community and better messaging to stakeholders. Methods for water resources assessment can be clarified by linking outcomes to higher level reporting of policy and issues. Acceptance of the role of water resources assessment can be facilitated by adding it to the management instruments in the IWRM Toolbox. Stovepipes among water management agencies require coordination to achieve this, usually through framework studies. Improved messaging will involve what people and stakeholders care about and will require changed approaches to presentation of outcomes by categories, such as drinking water, pollution prevention, and flood risk reduction. Researchers can report outcomes with technical messaging that trends toward uniform language and definitions and the water resources management community can nudge its media outlets to carry unifying messages.

Purpose: To identify factors linked with nutritional risk via the Malnutrition Universal Screening Tool scale assessment among critically ill patients from a hospital in Cali (Colombia). Materials and methods: A retrospective, analytical observational study was conducted with patients admitted to an intensive care unit (ICU). Sociodemographic, clinical, hematological, and biochemical parameters were analyzed, as well as their association with nutritional risk and patient mortality. Binary logistic regression was applied to outline nutritional risk. Results: Overall, 28.4% prevalence of elevated nutritional risk was observed. An association was found between nutritional risk and hemoglobin and hematocrit values, primary diseases accounting for ICU admission, gastrointestinal symptoms, and nutritional support route (p < 0.05). Mortality was 11.6% and it was correlated with nutritional risk, hemoglobin, and blood urea nitrogen. Conclusions: Gastrointestinal symptoms and the type of nutritional support received during hospitalization may increase nutritional risk, whereas polycythemia was a protective factor. We found an associative model to determine nutritional risk with high specificity and an adequate diagnostic validity index.

To ensure sustainability of the future power grid, the rate of expansion of distributed renewable energy resources (DRER) has introduced operational challenges. These includes managing transmission constraints with DRER power injection, dispatching DRER efficiently, managing system frequency and ensuring sufficient reactive power for voltage support. Coupled with the intensification of wildfires, power infrastructure across the United States faces challenges to minimize the impact to maintain system reliability and resiliency. This research embarks on a comprehensive evaluation, beginning with an in-depth historical analysis to delineate regions most susceptible to wildfires. Utilizing a multidimensional approach, the study assesses wildfire-induced risks to power grids, by integrating historical wildfire occurrences, real-time wildfire proximities, Moderate Resolution Imaging Spectroradiometer (MODIS) derived vegetation metrics, and system parameters, by employing Principal Component Analysis (PCA) based optimal weights, leading to the formulation of a novel risk factor model. This risk factor has the potential to be the key to ensuring the resilience of a renewable-rich smart grid when faced with a severe weather event. Our model’s applicability was further verified through an empirical assessment, selecting representative networks from diverse regions, providing insights into the geographical variability of risk factors. Ultimately, this study offers stakeholders and policymakers a comprehensive tool-set, empowering decisions regarding infrastructure investments, grid reinforcements, and strategic power rerouting to ensure consistent energy delivery using risk assessment against wildfire.

The study is devoted to analyzing the economic sustainability of the town of Amherst, MA. The city's top employer and core enterprise is the University of Massachusetts Amherst, with over 32,000 students and almost 2,000 staff members. Based on a literature review, a hypothesis was put forward that a university city should have a high level of economic sustainability. To assess economic sustainability, the USCESI Index was developed. It evaluates sustainability in three groups of parameters: society, economy, and ecology. The first group includes the level of racial diversity, the level of education of the population, and the access to medical services. The second group consists of the Gini coefficient by income level, the median cost of housing, and the unemployment rate. The environmental situation is assessed according to the Air Quality Index developed by the US Environmental Protection Agency. For comparison, the town of Braintree, MA, was taken. The USCESI was calculated for both locations. The analysis showed that both Amherst and Braintree have a high degree of economic sustainability. However, it was revealed that proximity to a significant economic center has a more powerful positive impact on economic sustainability than the location of a large university.

In this paper, aiming at the safety evaluation of ultimate bearing safety capacity of ultra-high-performance-concrete (UHPC) composite pile bridge foundation, the symmetrical reliability method with forward and inverse analysis considering the randomness of parameters is proposed to evaluate the safety performance of composite pile foundation. The proposed method, consid-ering the randomness of parameters, was used to calculate the safety factor of ultimate bearing capacity of composite pile foundation to meet the prescribed target reliability requirements. An example was used to verify the correctness of the proposed method. The proposed method was applied to an actual engineering example and the sensitivity of the parameters were analyzed, the calculation results show that: ignoring the randomness of the parameters will overestimate the safety of the composite pile foundation; the target reliability index has a great influence on the safety of composite pile foundation; the influence of statistical parameters of random variables on the safety of UHPC composite pile foundation cannot be neglected; the initial iteration value of the safety factor has no effect on the final calculation result. The proposed method has high ac-curacy and applicability, and provides an effective way for the safety factor estimation of ultimate carrying capacity of UHPC composite pile foundation.

Circular economy has recently emerged as a key strategy for promoting sustainability and reducing waste in various industrial sectors. This paper provides an overview of circularity in aerospace, wind energy, transportation, automotive and sports goods using data and information from the literature and the EC funded project "RECREATE". The survey reviews the different definitions, assessment methods and metrics used to explore and evaluate circularity, including assessment frameworks such as Life Cycle Assessment (LCA) and assessment indicators. Furthermore, explores the challenges, possibilities and the available tools for enhancing circularity, such as digital tools. The survey highlights the importance of a holistic and systemic technique to circularity, concerning all stakeholders along the value chain. Overall, this study aims to contribute to a better understanding of circular economy and provides insights for future research.

Machine Learning techniques can be used to identify whether deficits in cognitive functions contribute to antisocial and aggressive behavior. This paper initially presents the results of tests conducted on delinquent and non-delinquent youths to assess their cognitive functions. The dataset extracted from these assessments, consisting of 37 predictor variables and one target. was used to train three algorithms that aim to predict whether the data corresponds to that of a young offender or a non-offending youth. Prior to this, statistical tests were conducted on the data to identify characteristics that exhibited significant differences in order to select the most relevant features and optimize the prediction results. Additionally, other feature selection methods, such as Boruta, RFE, and Filter, were applied, and their effects on the accuracy of each of the three machine learning models used (SVM, RF, and KNN) were compared. 80% of the data were utilized for training, while the remaining 20% were used for validation. The best result was achieved by the K-NN model trained with 19 features selected by the Boruta method, followed by the SVM model trained with 24 features selected by the filter method.

The wastewater circular economy (WW-CE) promises a solution to improve water and sanitation management worldwide. However, the transition from conventional to circular wastewater treatment plants (WWTPs) requires facilitation to aid in decision makers understanding of integral sustainability impacts of alternative WW-CE configurations. This research implemented Life Cycle Sustainability Assessment (LCSA), combining Life Cycle Assessment, Social Life Cycle Assessment and Life Cycle Costing with a Multi-criteria Decision Making (MCDM) model to quantify environmental, socio-cultural, and economic impacts of conventional WWTPs with the WW-CE. Two real WWTPs in Chile have embraced the WW-CEs and adopting the title of Biofactories. These were considered as case studies, compared under three scenarios to demonstrate the sustainability trade-offs of the transition from no sanitation to conventional WWTPs and Biofactory WW-CE configurations. Results demonstrated that the transition to WW-CEs improved integral sustainability according to the LCSA model implemented in both WWPTs. This study highlights the urgent need to adopt sustainable decision-making models to not only improve sanitation coverage, but also improve sustainability performance of the sanitation industry across the globe.

In the absence of a holistic view of Landscape Sustainability, credible data and consistent information are needed to help decision making and support adaptive management. However, consolidated tools (system of standards and controls) of assessment exist, but show a complexity of the references on one hand, and are mostly qualitative and environmental indicators based on the other hand. This review article deals with the theme of both environmental and landscape indicators in general, the principles and the fundamental definitions. The main models used, the prerequisites and various fields of application are also taken into consideration. Last but not least, various environmental and landscape indicators are presented and compared.

The oil spilled from the Gulf war caused land pollution and various petroleum compounds. Among petroleum compounds, polycyclic aromatic hydrocarbons (PAHs) are known for toxicity, and have been designated as carcinogenic, mutagenic, and endocrine disrupting substances by the United States Environmental Protection Agency (USEPA). According to the USEPA, toxic equivalents quotient (TEQ), and mutagenic equivalents quotient (MEQ) can be calculated by multiplying the toxic equivalency factor (TEF) and mutagenic equivalency factor (MEF) by the concentration of PAHs. The USEPA calculates the relative TEF for other PAHs by setting the TEF value of benzo(a)pyrene, which is highly toxic, to 1. Relative MEF is also calculated in the same way. In this study, the TPH concentrations of crude oil-contaminated soils collected from the Burgan in Kuwait were measured to be 5, 8, and 20% and TEQ and MEQ of the soils were calculated by multiplying the 16 PAHs concentrations measured for each sample by TEF and MEF, respectively. When the TPH concentration was increased by 4 times from 5% to 20%, the TEQ was increased by about 9 times and the MEQ was increased by about 10 times. Therefore, it was concluded that as the TPH concentration increases, the carcinogenicity and mutation rate increase greatly. In addition, ecotoxicity assessment was performed using luminescent bacteria to compare the relationship between the calculated TEQ and MEQ and actual ecotoxicity, and benzo(a)pyrene among 16 PAHs showed a coefficient of determination of 0.95. In this study, ecotoxicity in PAHs-contaminated environment can be estimated by analyzing benzo(a)pyrene as a representative substance.

Embryo quality evaluation during in vitro development is vital for the success of assisted reproductive technologies (ART). However, the subjective morphological assessment by embryologists may result in inconsistencies that affect the selection of the best embryo for transfer. To provide a more comprehensive evaluation of embryo quality, we performed the integration of embryo metabolomics with standardized morphokinetic classification. The culture medium of 55 embryos (from 21 couples undergoing ICSI) was collected at two timepoints (day 3 and 5). Samples were split into Good (n=29), Lagging (n=19) and Bad (n=10) according to embryo morphokinetic evaluation. Embryo metabolic performance was assessed by 1H-NMR, monitoring the variation of specific metabolites (pyruvate, lactate, alanine, glutamine, acetate, formate). Adjusted metabolite differentials were observed during the first three days of culture and found to be discriminative of embryo quality at the end of day 5. Pyruvate, alanine, glutamine, and acetate were major contributors to this discrimination. Good and Lagging embryos were found to export and accumulate pyruvate and glutamine in the 3 first days of culture, while Bad embryos consumed them. This suggests that Bad embryos have a less active metabolism than Good and Lagging embryos and these two metabolites as putative biomarkers for embryo quality. This study provides a more comprehensive evaluation of embryo quality and can lead to improvements in ART by enabling the selection of the best embryos. By combining morphological assessment and metabolomics, the selection of high-quality embryos with the potential to result in successful pregnancies may become more accurate and consistent.

As required by the EU legislation and the national risk management duties, the pesticide residues were determined by four specialized laboratories in 9,924 samples taken from 119 crops of economic importance and imported foodstuffs during 2017-2021 in Hungary. The screening method applied covered 622 pesticide residues as defined for enforcement purposes. The limit of detection ranged between 0.002-0.008 mg/kg. The 1.0% violation rate was lower than in the European Union for all commodities. No residue was detectable in 45.9% of the samples. For detailed analyses of the results, eight commodities (apple, cherry, grape, nectarine/peach, sweet peppers, and strawberry) were selected as they were analyzed over 195 samples and contained most frequently residues. Besides testing their conformity with national MRLs, applying 0.3MRL action limits for pre-export control, we found that 73% of the sampled lots would be compliant with ≥90% probability based on second independent sampling. Multiple residues (2-23) in one sample were detected in 36-50% of the tested lots. Noting the provisions of integrated pest management and the major pests and diseases of selected crops, normally 3-4, exceptionally 7-9 active ingredients of different mode of actions should be sufficient for their effective and economic protection.

Pose estimation has various applications in analyzing human movement and behavior, including providing feedback to users about their movements so they could adjust and improve their movement skills. To investigate the current research status and possible gaps, we searched Scopus and Web of Science for articles that (1) human `body' pose estimation is used and (2) user movement is assessed and communicated. We used either a bottom-up or top-down approach to analyze 20 articles for methods used to estimate human pose, assess movement, provide feedback to users, as well as methods to evaluate them. Our review found that pose estimation systems typically used CNNs while movement assessment methods varied from mathematical formulas or models, rule-based approaches, to machine learning. Feedback was primarily presented visually in verbal forms and nonverbal forms. The experiments to evaluate each part ranged from the use of public datasets to human participants. We found that while there was an improvement, the majority of pose estimation challenges remain. The effectiveness and factors for choosing movement assessment methods for a new context are still unclear. In the end, we suggest that studies about feedback prioritization and erroneous feedback are needed.

Abstract: The need to rapidly reduce GHG has accelerated the adoption of circular models of production. However, this has proved to be a challenging task for SMEs, who lack the financial, organizational and informational capabilities to implement circular business models. In this context, calculating the carbon footprint (CF) of their products could provide the basis for assessing the different circular economy (CE) practices. The aim of this study is to present a CF calculation tool that can be used to calculate the CF of SMEs. The design of the tool was based on the Life Cycle Assessment (LCA) methodology, taking into account the various barriers that SMEs face in adopting CE practices. The tool was tested in a small cheese factory in northern Greece. The pro-duction process was mapped, a GHG inventory was created and the total emissions related to the production of a specific product was estimated. The final aim is to test this tool at a large scale.

Functional somatic disorders (FSD) characterized by persistent and disabling physical symptoms are common in adolescents. Diagnostic uncertainty and insufficient illness explanations are proposed perpetuating factors that may constitute barriers for treatment engagement. This study evaluates the impact of manualized assessment and psychoeducation on diagnostic certainty and various clinical outcomes in adolescents with multi-system FSD. Ninety-one adolescents (15-19 years) included in a randomized trial testing group-based therapy (AHEAD) received systematic assessment (4 hrs.) and a subsequent psychiatric consultation (1.5 hrs.). Clinical outcomes included self-reported physical health, symptom severity, illness perception, illness related behavior, and psychological flexibility assessed before and approximately two months after assessment, prior to specialized treatment. Data were analyzed using t-tests. Immediately following assessment 71 (80.7%) adolescents out of 88 reported a higher diagnostic certainty and 74 (84.1%) reported that attending assessment gave them positive expectations for future treatment. A clinically relevant improvement of physical health was not observed at two months but considerable reductions were seen on symptom severity, illness worry, negative illness perceptions, limiting illness behavior and psychological inflexibility. The results underpin the importance of systematic assessment and psychoeducation which may be effective in their own right in specialized treatment of adolescents with severe FSD.

Peri-urban forests often have extensive networks of greenways that allow for outdoor recreation. However, information associated with these greenways often does not include their degree of naturalness, which is usually reduced to descriptions of flora and fauna and often overlook the factors that reduce naturalness. Therefore, in some cases, the naturalness of these greenways is not as high as expected. Having a quantification of their naturalness would be useful, especially for hikers interested in appreciating and enjoying nature. Additionally, this information would help outdoor recreation managers to design trails or decide which ones to promote as "greenways". The objectives of this study are (1) to design a method to calculate and map the naturalness of greenways using two approaches, one based on perceptual fieldwork and the other on Geographic Information Systems (GIS); (2) to apply the designed method to a specific greenway; and (3) to compare both methodological approaches. The results show that, for the greenway studied, the naturalness scores obtained are low in all three types of analyses used. Around 70% of the greenway sections in the GIS visibility analysis and 80% in the GIS proximity analysis have a low naturalness index, while this value is reduced to 40% with the fieldwork analysis. Although the results of the GIS approach (proximity and visibility) generate naturalness indices and spatial patterns that are very similar, they differ significantly from those derived from the fieldwork analysis. The discussion of the results suggests that the three methodologies used are valid for analysing the degree of naturalness of the trails, but if used together, it would be possible to add flexibility to the type of variables incorporated in the analysis.

Integrated assessment modelling (IAM) has been successfully used in the development of international agreements to reduce transboundary pollution in Europe, based on the GAINS model of IIASA. At a national level in the UK a similar approach has been taken with the UK Integrated Assessment Model, UKIAM, superimposing pollution abatement measures and behavioural change on energy projections designed to meet targets set for reduction of greenhouse gas emissions, and allowing for natural and imported contributions from other countries and shipping. This paper describes how UKIAM has been used in development of proposed targets for reduction of fine particulate PM2.5 in the Environment Act, exploring scenarios encompassing different levels of ambition up to 2050 with associated health and other environmental benefits. There are two PM2.5 targets, an annual mean concentration target setting a maximum concentration to be reached by a future year, and a population exposure reduction target with benefits for health across the whole population. The work goes further, to also demonstrate links to social deprivation. There is a strong connection between climate measures aimed at reducing net GHG emissions to zero by 2050 and future air quality, which may be positive or negative, as illustrated by sectoral studies for road transport where electrification of the fleet needs to match the evolution of energy production, and for domestic heating where use of wood for heating is an air quality issue. UKIAM has been validated against air pollution measurements and other modelling, but there are many uncertainties including future energy projections. New work is beginning to link UKIAM directly with the TIMES model addressing future energy projections, to explore different uptake scenarios for hydrogen production and use with respect to air quality.

To evaluate the impact of a new Substance Use Disorder (SUD) education program on medical students' representations, we selected the Substance Abuse Attitude Survey (SAAS) questionnaire, which we adapted to our curriculum and cultural context. To validate this adapted version, we conducted an exploratory factor analysis following the administration of our 29-items bSAAS questionnaire to 657 medical students in Belgium (response rate: 71,1%). 23 items correlated to 3 factors namely "Stereotypes and moralism", "Treatment optimism" and "Specialised treatment" were retained (70% of total variance explained, Cronbach's alpha= 0.80) and constituted the new questionnaire called beSAAS. The factor "Specialised treatment", stood out from previous studies which could be explained by our target population and the impact of the formal, informal, and hidden curriculum in medical education. This study highlighted certain factors influencing stereotypical representations such as age, gender, origin, and personal or professional experience with substance use. Our study allowed us to retain the beSAAS as a good questionnaire to evaluate SUD stigma and highlighted interesting findings to improve SUD training in medicine. Further studies are needed to complete its validity and reliability.

Background: Some studies have shown that an increase in visceral fat is associated with postoperative clinical and oncologic outcomes. However, no studies have used bioelectrical impedance analysis (BIA) to determine the effects of visceral fat on the oncologic outcomes of colorectal cancer (CRC). This study aimed to investigate the relationship between visceral fat area (VFA) and clinical, and oncologic outcomes in CRC. Methods: This study included 203 patients who underwent anthropometric measurements by BIA before surgical treatment for CRC between January 2016 and June 2020. Results: According to the cutoff level of VFA by receiver operating characteristic curve analysis, 85 (40.5%) patients had a low VFA, and 119 (59.5%) had a high VFA. Multivariate analysis found that preoperative CRP (hazard ratio [HR], 3.882; 95% confidence interval [CI], 1.001–15.051; p=0.050) and nodal stage (HR, 7.996; 95% CI, 1.414–45.209; p=0.019) were independent prognostic factors for overall survival, while sex (HR, 0.110; 95% CI, 0.013–0.905; p=0.040), lymphovascular invasion (HR, 3.560; 95% CI, 1.098–11.544; p=0.034), and VFA (HR, 4.263; 95% CI, 1.280–14.196; p=0.040) were independent prognostic factors for disease-free survival (DFS). Conclusion: High VFA preoperatively measured by BIA was associated with inflammations and was an independent prognostic factor for DFS.

The supply of mental health processes in primary care has gaps. This study aims to analyze the association of agreement criteria and flows between primary care teams and the Family Health Support Center (NASF) for mental health collaborative care, considering the difference between capital and non-capital cities in Brazil. This cross-sectional study was conducted based on secondary data from the Primary Care Access and Quality Improvement Program. Agreement criteria and flows were obtained from 3883 NASF teams of the matrix support or collaborative care. The Chi-square test and multiple Poisson regression were used; p &lt; 0.05 was considered statistically significant. Prevalence ratios of negative associations demonstrated protective factors for support actions: follow-up at Psychosocial Care Center, management of psychopharmacotherapy, offer of other therapeutic actions, care process for users of psychoactive substances, and offer of activities to prevent the use of psychoactive substances. Collaborative care in primary care was effective, and capital cities were a protective factor compared with non-capital cities.

The needs for environmental reporting to include positive outcomes considering differences between creation of less harm, benefits and net benefits are explored. To become mainstream, nature-positive development needs positive messaging, measures and metrics to guide, plan and assess urban outcomes. With the accelerating climate crisis and negative messages getting the upper-hand, it’s important to avoid paralysis by bad news. Whilst striving for a nature-positive world, more effort should be on moving beyond zero to qualify and quantify benefits, gains, and regenerative outcomes instead of oscillating around damage and loss sticking points. Life Cycle Benefit Assessment (LCBA) is a method to measure gains in accelerating restoration and climate security. It enables a good news focus as its reach is to quantify and show positive gains beyond the negative and zero loss outcomes. The paper aims to clarify concepts, challenges and quantitative methods then review real-world third-party-certified case studies. Climate security, human wellness and resource viability gains inside safe operating space within planetary boundaries are quantified as positive benefits. Contrary to conventional Life Cycle Impact Assessment (LCIA) LCBA assigns damage and loss as negative debts and benefit as positive gains. It concludes that LCBA offers business and design a new environment assessment tool, with research needed on economic and other outcomes.

Combination treatment, i.e., the use of two or more drugs for the same condition, is frequent in medicine if monotherapy yields an insufficient therapeutic response. We here review and challenge clinical study designs and formats of reporting outcomes for the evaluation of the benefit/risk ratio of combination treatment over monotherapy. We demonstrate that benefits of combination treatment at the group level over-estimate the probability of benefit at the single patient level based on outcome simulations under almost any imaginable setting. Based on these findings we propose that studies testing combination treatment should always report on percentages of responders to monotherapy and combination treatment. We provide equations that allow calculation of the percentage of patients truly benefitting from combination (responders to both monotherapies) and that of patients exposed to risk of harm from adverse effects without a reasonable expectation of individual benefit. These considerations are explained based on real clinical data, mostly from the field of functional urology (male lower urinary tract symptoms).

Clinical trials for Alzheimer’s disease (AD) face multiple challenges, such as the high screen failure rate and even allocation of heterogeneous participants. Artificial intelligence (AI), which has become a potent tool of modern science with the expansion in the volume, variety, and velocity of biological data, offers promising potential to address these issues in AD clinical trials. In this review, we introduce the current status of AD clinical trials and topic of machine learning. Then, a comprehensive review is focused on the potential applications of AI in the steps of AD clinical trials, including the prediction of AD biomarkers and differential diagnosis of AD in the prescreen during eligibility assessment and the likelihood stratification of patients who will progress to AD dementia and fast cognitive decline group from the slow decline group in randomization. Finally, this review provides challenges, developments and the future outlook on the integration of AI into AD clinical trials.

One of the main drivers behind the urbanization process is attributed to economic fundamentals of urban growth, which boost migration from rural to urban context. This migration can be studied geographically, with increasing rates of population as the main component in developing countries, over Asia and Africa, specifically. Research has been focusing in creating models and adaptative schemes to manage and plan cities to promote sustainable development for housing large quantities of population and preserve a long-term living environment. The approach from a smart city perspective, adjusted to the rapid urbanization condition can be helpful to deal urban issues by convergence and interaction between urban agents and information technology. At academia, few works have addressed the role of Smart Cities to face the challenge of rapid urbanization. The aim of this study is to research and analyze if strategies with smart city vision can lessen environmental impacts at cases with rapid urbanization, and how can we leverage technology to promote environmental sustainability at rapid urbanization phenomena occurring at developing countries using RIAM environmental assessment method in the case of Beijing, China'.

Past exploration for U deposit in the Philippines discovered the mineralization of radioactive allanite in Palawan. The allanite occurs as sand component in the heavily populated beach of Erawan, San Vicente, Palawan. This work assessed the risks associated with the radionuclides in Erawan beach by in situ ground radiometric survey of K, U, and Th in 694 sampling points. Principal component analysis (PCA) and Pearson correlation coefficient were used to determine the similarity between the radionuclides and to identify other probable anthropogenic sources of radionuclides. Our results show that the mean activity concentrations of K (597.8 Bq kg^-1) and Th (93.15 Bq kg^-1) are equivalent to 1.5 and 3.1 times of the world average natural radioactivity levels in soil, respectively, while the mean U (34.7 Bq kg^-1) is similar to the world average. The mean radiological risk assessments like radium equivalent, gamma specific activity index, external hazard index, internal hazard index, absorbed gamma dose rate, annual effective dose equivalent, annual gonadal equivalent dose, and excess lifetime cancer risk are 213.96 Bq kg^-1, 0.78, 0.58, 0.67, 97.24 nGy h^-1, 119.25 µSv y^-1, 684.39 µSv y^-1, and 0.42 (10^-3), respectively. Th consistently correlated most to the risks. We attribute the occurrence of Th to the presence of allanite, K to fertilizer use for farming, and U to both the allanite and farming. The results of our study can provide important baseline data for future detailed studies or monitoring of the long-term effects of elevated radiation levels to the local population of Erawan.

The use of multi-gene panels for germline testing in breast cancer enables the estimation of cancer risk and guides risk-reducing management options for tested individuals and their family members. We performed an analysis in our clinical database to identify breast cancer patients undergoing genetic testing with positive reports. We reviewed positive results with respect to the different levels of information provided in the reports; risk estimation and management, cascade family testing, information from secondary findings and actionable information for treatment decision-making. A total of 415 positive test reports were identified with 57.1%, 18.1%, 10.8% and 13.5% of individuals having pathogenic/likely pathogenic variants in high (BRCA1, BRCA2, PALB2, PTEN, TP53), moderate (ATM, CHEK2, NBN), low (BARD1, BRIP1, CHEK2, MLH1, MSH2, MSH6, NF1, RAD51C) and with insufficient evidence for breast cancer risk genes (FANCA, FANCM, NBN, MRE11, PMS2, RAD50, RAD51B, XRCC2, MUTYH), respectively. 6.7% of individuals were double heterozygotes with two pathogenic variants. Germline findings in 92% of individuals are linked to evidence-based treatment information and receive risk estimates for predisposition to breast and/or other cancer types. The use of germline findings for treatment decision making expands the indication of genetic testing to include individuals that could benefit from targeted treatments.

Optic nerve sheath diameter (ONSD) can help predict the neurologic outcome of patients with post-cardiac arrest (CA) return of spontaneous circulation (ROSC). We aimed to investigate the effect of ONSD changes before and after CA on neurologic outcomes in patients with ROSC after CA using brain computed tomography (CT). The study included patients hospitalized after CA, who had undergone pre- and post-CA brain CT from January 2001 to September 2020. The patients were divided into good and poor neurologic outcome (GNO and PNO, respectively) groups based on the neurologic outcome at hospital discharge. We performed between-group comparisons of the amount and rate of ONSD changes on brain CT and calculated the area under the curve (AUC) to determine their predictive value for neurologic outcomes. Among the 96 enrolled patients, 25 had GNO. Compared to the GNO group, the PNO group showed significantly higher amount (0.30 vs. 0.63 mm; p=0.030) and rate of change (5.26 vs. 12.29 %; p=0.041). The AUC for predicting PNO was 0.64 (95% CI=0.53–0.73; p=0.04) and patients with a rate of ONSD change &gt;27.2% had PNO with 100% specificity and positive predictive value. Hence, ONSD changes may predict neurologic outcomes in patients with post-CA ROSC.

Diagnosis of Awake Bruxism (AB) is problematic due to the inability to use continuous recordings during daytime activities. Recently, a new semi-instrumental approach was suggested, viz., an Ecological Momentary Assessment (EMA), with the use of a smartphone application. With the application subjects are requested to report, at least 12 times per day, the status of their masticatory muscle activity (relaxed muscles, jaw bracing without tooth contact, teeth contact, teeth clenching or teeth grinding). The aim of the present study was to compare the EMA to the assessment of AB as defined by a single point self-report. The most frequent condition recorded by the EMA was relaxed muscles (ca. 60%) and the least frequent one - Teeth grinding (0.6 %). The relaxed muscle condition also showed the lowest coefficient of variance over a 7day period of report. Additionally, only the relaxed muscles and the Jaw bracing conditions presented an acceptable ability to discriminate between AB positive and AB negative subjects, as defined by single point self-report questions. The combination between self-report and EMA may have a potential to promote our ability to diagnose AB. We suggest to re-consider the conditions of Teeth contact and Teeth grinding while using EMA to evaluate AB.

Research professors develop scientific products that impact and benefit society, but their competencies in doing so are rarely evaluated. Therefore, employing a mixed two-stage sequential design, this study developed a self-assessment model of research professors’ competencies with four domains, seven competencies, and 30 competency elements. Next, we conducted descriptive statistical analysis of those elements. In the first year, 320 respondents rated themselves on four levels: initial, basic, autonomous, and consolidated. In the assessment model’s second year, we compared 30 respondents’ results with those of their initial self-assessment. The main developmental challenge was Originality and Innovation, which remained at the initial level. Both Training of Researchers and Transformation of Society were at the basic level, and Digital Competency was at the autonomous level. Both Teaching Competence and Ethics and Citizenship attained the consolidated level. This information helps establish priorities for accelerating researchers’ training and the quality of their research.

Introduction In 2016 the European Union setup its first structured food provision program to combat food insecurity. We aimed to measure the program’s capacity in assisting its beneficiaries to achieve a healthy diet and measure their satisfaction. Methods A computational study was carried out to calculate daily food provision per person under the program for January 2016-December 2017. A cross sectional survey in 3942 beneficiaries took place in December 2017-June 2018 collecting anthropometric, sociodemographic and program satisfaction data. Descriptive statistics were performed and reported as relatively frequencies, mean ± standard deviation. Results Dairy, fresh meat, legumes, sugar, olive oil and tomato concentrate were the most commonly procured items. The program’s contribution to vegetable, dairy and cereal intake was the lowest (3.4%, 6.1%, 6.0% respectively) as opposed to free sugars (12.2%) and oils (24.5%). The program’s algorithm favors greatly (almost 3-fold) single person applications compared to 4+ persons applications. The monetary value was estimated at 21.23±23.4 euros/food provision, however 64.4% of beneficiaries reported a high positive impact on the household budget. 50.7% and 41.6% reported high positive impact on feelings of anxiety and security, respectively. ~70% of the beneficiaries were highly satisfied with the foods provided, with lower scores for quality and shelf-life (50.7% and 58.8% high respectively). Conclusions The program is met by high beneficiary satisfaction and is perceived as a substantial assistance. Increases in the amounts and variety of foods delivered, with a focus on fruit, vegetables and fish should be considered, to further improve the program’s dietary impact.

The temperature of the indoor environment is important for health and wellbeing especially at the extremes of age. The study aim was to undertsand the relationship between self-reported thermal sensation and extremity skin temperature in care home residents with and without dementia. The Abbreviated Mental Test (AMT) was used to discriminate residents to two categories, those with and those without dementia. After acclimatisation, measurements included: tympanic membrane temperature, thermal sensation rating followed by infrared thermal mapping of non-dominant hand and forearm. Sixty-nine afebrile adults (60-101 years of age) were studied in groups of two to five, in mean ambient temperatures of 21.4^oC-26.6^oC (median 23.6^oC). Significant differences were observed between groups; thermal sensation rating (p=0.02), tympanic temperature (p=0.01), fingertip skin temperature (p=0.01) and temperature gradients; fingertip-wrist p=0.001 and fingertip-distal forearm, p=0.001.

The traditional standards employed for pain assessment have many limitations. One such limitation is reliability because of inter-observer variability. Therefore, there have been many approaches to automate the task of pain recognition. Recently, deep-learning methods have appeared to solve many challenges, such as feature selection and cases with a small number of data sets. This study provides a systematic review of pain-recognition systems that are based on deep-learning models for the last two years only. Furthermore, it presents the major deep-learning methods that were used in review papers. Finally, it provides a discussion of the challenges and open issues.

Consumption of milk contaminated with antibiotic residues above the maximum residue limit (MRL) causes direct toxicity to humans and the development of superbugs that leads to the failure of antibiotic therapy and threatens human life. Besides, long-duration exposure might alter the nature of gut microflora results in the enhancement of many diseases. Therefore, we examined 300 raw and processed packet milk samples using thin layer chromatography (TLC) and ultra high performance liquid chromatography (UHPLC) method against five veterinary antibiotics and assessed the risk for consumers in Chattogram, Bangladesh. Risk analysis was calculated by using hazard quotient on the basis of 165 ml per capita milk consumption. We found a total of 7% prevalence of antibiotic residues in raw milk samples which were higher (8%) in individual samples than the pooled samples (4%). However, we did not find any processed packet milk samples as positive. The mean concentration of oxytetracycline residue was detected 61.29 µg/l and amoxicillin was 124 µg/l in individual milk samples. Risk analysis showed the hazard quotient values of 0.0056 for oxytetracycline and 0.0017 for amoxicillin residue which was confirmed that, no significant health risk associated with the consumption of milk produced and marketed in the study area. Our study might fill the gap of knowledge to measure the safety status of milk regarding public health issues.

The aim of this study was to introduce a new activity-based balance index by using accelerometer data. Twenty-seven junior soccer players from the Iranian premier league were selected. Four functional tests, consisting of one leg stance, dynamic Y balance, running and dribbling tests, were conducted to assess the players’ balance, activity and skill. During these four tests, besides their relative scores, the acceleration of their body center was also recorded. Activity-based balance index (ABI) was calculated using these acceleration data. The results showed positive correlations between ABI and both static and dynamic balance scores. Additionally, negative correlations were found between ABI and dribbling scores, which demonstrate the agility required for this skill. It seems that this new index achieves the evaluation of both the balance and the skill level of soccer players. Perhaps this is a new way of talent identification and also a re-development of balance tests from traditional to modern.

As organizations are vulnerable to cyber attacks, their protection becomes a significant issue. Capability Maturity Models can enable organizations to benchmark current maturity levels against best practices. Although many maturity models have been already proposed in the literature, a need for models that integrate several regulations exists. This article presents a light web-based model that can be used as a cybersecurity assessment tool for Higher Education Institutes (HEIs) of the UK. The novel Holistic Cybersecurity Maturity Assessment Framework incorporates all security and privacy regulations and best practices that HEIs must be compliant to and can be used as a self-assessment or a cybersecurity audit tool.

This review aimed to update the main aspects of aflatoxin production, occurrence and incidence in selected countries, and associated aflatoxicosis outbreaks. Means to reduce aflatoxin incidence in crops were also presented with an emphasis on the environment-friendly technology using atoxigenic strains of Aspergillus flavus. Aflatoxins are unavoidable widespread natural contaminants of foods and feeds with serious impact on health, agricultural and livestock productivity, and food safety. They are secondary metabolites produced by Aspergillus species distributed on three main sections of the genus (section Flavi, section Ochraceorosei, and section Nidulantes). Poor economic status of a country exacerbates the risk and the extent of crop contamination due to faulty storage conditions that are usually suitable for mold growth and mycotoxin production: temperature of 22 to 29°C and water activity of 0.90 to 0.99. This situation paralleled the prevalence of high liver cancer and the occasional acute aflatoxicosis episodes that have been associated with these regions. Risk assessment studies revealed that Southeast Asian and Sub-Saharan African countries remain at high risk and that, apart from the regulatory standards revision to be more restrictive, other actions to prevent or decontaminate crops are to be taken for adequate public health protection. Indeed, a review of publications on the incidence of aflatoxins in selected foods and feeds from countries whose crops are classically known for their highest contamination with aflatoxins, reveals that despite the intensive efforts made to reduce such an incidence, there has been no clear tendency, with the possible exception of South Africa, towards sustained improvements. Nonetheless, a global risk assessment of the new situation regarding crop contamination with aflatoxins by international organizations with the required expertise is suggested to appraise where we stand presently.

Endemic freshwater fish from semiarid environments are among the most threated species in the world due to the water overexploitation and habitat fragmentation problems. Stepped or pool-type fishways are used worldwide to reestablish longitudinal connectivity and mitigate fish migration problems. Many of them are being installed or planned in rivers of semiarid environments, however, very few studies about fish passage performance through pool-type fishways has been carried out to date on these regions. The present work focuses on the passage performance of two potamodromous cyprinids endemic of these regions, with different ecological and swimming behavior: southern Iberian barbel (Luciobarbus sclateri) and Iberian straight-mouth nase (Pseudochondrostoma polylepis), in two of the most common types of stepped fishways: vertical slot and submerged notch with bottom orifice fishways. Experiments were carried out during the spawning season in the Segura River (South-Eastern Spain), using a PIT tag and antennas system. Ascent success was greater than 80%, with a median transit time lower than 17 minutes per meter of height in all trials and for both species and fishway types. Results show that both types of fishways, if correctly designed and built, provide interesting alternatives for the restoration of fish migration pathways on these regions.

Considering the manufacturing of automotive components, there exists a dilemma around the substitution of traditional Cast Iron (CI) with lighter metals. Nowadays, aluminium alloys, being lighter compared to traditional materials, are considered as a more environmentally friendly solution. However, the energy required for the extraction of the primary materials and manufacturing of components is usually not taken into account in this debate. In this study, an extensive literature review has been performed to estimate the overall energy required for the manufacturing of an engine cylinder block using (a) cast iron and (b) aluminium alloys. Moreover, data from over 100 automotive companies, ranging from mining companies to consultancy firms, have been collected in order to support the soundness of this investigation. The environmental impact of the manufacturing of engine blocks made of these materials is presented with respect to the energy burden; the “cradle-to-grave approach” has been implemented to take into account the energy input of each stage of the component lifecycle starting from the resource extraction and reaching to the end-of-life processing stage. Our results indicate that although aluminium components contribute towards reduced fuel consumption during their use phase, the vehicle distance needed to be covered in order to compensate for the up-front energy consumption related to the primary material production and manufacturing phases is very high. Thus, the substitution of traditional materials with lightweight ones in the automotive industry should be very thoughtfully evaluated.

Background: The present study analyzes the evaluation of communication skills by standardized patients (SPs) and medical evaluators (Es) in an OSCE setting. Methods: The OSCE involved 189 sixth-year medical students, as well as 34 SPs and 63 Es. Communications skills were evaluated in 8 stations, simultaneously by SPs and Es. The SPs were actors who had been trained in the clinical case and who acted in accordance with a standardized script in a simulated clinical situation. The evaluators, also standardized, were Resident Doctors or staff Doctors from the Hospital Services involved. Results: The global scores awarded to students for communication skills were very similar in both groups, although the score awarded by Es was significantly higher, and a direct relationship was also observed between the mean scores awarded by both groups. Evaluators awarded significantly higher scores than SPs in 7 out of the 10 items on the checklist. Female medical students also scored significantly higher than their male counterparts in many items, including external appearance, listening, cordiality, optimism, interest, expression and empathy. Conclusions: Our data indicate that SPs and Es evaluated communication skills in a similar manner in an OSCE setting, a finding which suggests that health-related professionals can be used as an alternative to SPs, thus helping to lower economic costs. Our study also confirms a gender difference (in favor of women) in the evaluation of communications skills by both groups.Our data indicate that SPs and Es evaluated communication skills in a similar manner in an OSCE setting, a finding which suggests that health-related professionals can be used as an alternative to SPs, thus helping to lower economic costs. Our study also confirms a gender difference (in favor of women) in the evaluation of communications skills by both groups.

Improving the efficiency of the supply process in prefabricated components is challenging and requires accounting for a variety of risks involved in the management of the suppliers. The purpose of this study is to present a method to account for the systematic trade-offs between several supplier alternatives. A novel framework is presented for the whole assessment of supplier alternatives by taking advantage of the information extracted from customized building information modeling (BIM) and a database required for assessment of impacts. A data library related to assessment criteria for supply alternatives is built to facilitate the storage and sharing of information. Analytic hierarchy process (AHP) is used to select the optimal supplier that is able to provide the most satisfaction for the determined criteria. The proposed framework was also illustrated by the implementation in a mega project. The study implication is that BIM-enabled supplier selection can indeed lead to more benefits and higher values for all stakeholders.

This paper addresses the development of knowledge and assessment-centered learning approaches within a reflective learning framework in a first year physics class in a university faculty. The quality of students’ reflections was scored using a Self-reporting Reflective Learning Appraisal Questionnaire at the end of each learning approach. The results showed the differences between the approaches based on reflections on the learning control through self-knowledge, by connecting experience and knowledge, as well as through self-reflection and self-regulation. Assessment-centered activities fundamentally help students identify aspects of their attitudes towards, as well as regulate, their sustainability learning education.

An exploratory Life Cycle Assessment was carried out to provide insight into the environmental impacts of using the green seaweed Ulva spp. as a feedstock for production of bioplastic. The study focused on the production of lactic acid as a precursor of polylactic acid. The studied production process consists of (1) the cultivation of Ulva spp. in Integrated Multitrophic Aquaculture, (2) the processing of the biomass for solubilisation of sugars, (3) the fermentation of the sugars to lactic acid and (4) isolation of lactic acid from the fermentation broth. The study identifies environmental hotspots and compares the experimental seaweed production chain with conventional feedstock. The main hotspot identified is electricity consumption during seaweed cultivation. This impact of electricity consumption can be lowered by reducing energy use and sourcing renewable energy, and by improving the material efficiency in the product chain. To improve understanding of the environmental impacts of the production process, future studies can broaden the system boundaries and broaden the scope of sustainability issues included in the environmental assessment.

This research assess the effects of training program based on the usage of the digital learning objects in teaching practice at the Northern Borders University staff. E Assessment through the tablets and smart phones and the teachers’ attitudes towards such way of evaluation is the major objective of this study as the researcher expects that the assessment mechanism in the university through utilization of tablets and smart phones and its application will inevitably bring in a systematic improvement in the assessment and evaluation process of the curricula. Moreover, making use of the e learning objects in training will make a significant change in e training program of the university. Hence, the researcher has chosen voluntary random samples from the university teaching staff (men\women) from various different faculties (medicine, medical sciences, science, education and arts, business administration, home economics, and science and literature). These samples included 300 members of the teaching staff. In a group of 20 to 25 members, a personal training was conducted regarding the usage of tablets and smart phones and its applications in the assessment process. Each group participated by producing a complete e-assessment for their students in the Northern Borders University and by the e learning system i.e. Blackboard and Question Mark. The research also depends on the semi-experimental design of multiple groups and on testing the groups’ pre and post achievement tests. In addition, the research identifies the level of the university teaching staff in using the tablets and the smartphones and its applications in the assessment process by the note card that the individuals have during the test.

The social criteria of sustainable development have remained underexplored. Moreover, a large number of green building assessment tool and social sustainability documentations have been developed which, has had a direct impact on social criteria issues, but there seems to be a substantial gap in the study of social criteria in green building assessment tools. In examining the problem facing social sustainability, taking into consideration social sustainability in sustainable development reviews and green building assessment tool towards social aspects. This paper through analysis identified a centripetal conceptual framework composed of seven key components equity, education, participation & control, social cohesion, health & safety, accessibility & satisfaction, and cultural values. The interpretation of the social sustainability in green building assessment tool would impact building practitioners towards implementing social criteria in GBAT. The aim was to identify social categories as well as consider a starting point for the development of an effective social criteria assessment tool for green building.

Material efficiency is a key element of new thinking to address the challenges of reducing impacts on the environment and of resource scarcity, whilst at the same time meeting service and functionality demands on materials. Directly related to material efficiency is the concept of the Circular Economy, which is based on the principle of optimising the utility embodied in materials and products through the life cycle. Whilst steel, as a result of high recycling rates, is one of the most ‘circular’ of all manufactured materials, significant opportunities for greater material efficiency exist, which are yet to be widely implemented. In the field of Life Cycle Management, Life Cycle Assessment (LCA) is commonly used to assess the environmental benefits of recovering and recycling materials through the manufacturing supply chain and at end-of-life. As well as containing information to calculate environmental impacts, LCA models also provide the flows of materials through the product life cycle and can also be used to quantify material efficiency and the circularity of a product system. Using an example taken from renewable energy generation, this paper explores the correlation between product circularity and the environmental case for strategies designed to improve material efficiency. An LCA-based methodology for accounting for the recovery and re-use of materials from the supply chain, and at end-of-life, is used as the basis for calculating the carbon footprint benefits of five material efficiency scenarios. Resulting carbon footprints were then compared with a number of proposed material circularity indicators. Two conclusions from this exercise were that i) LCA methodologies based around end-of-life approaches are well placed for quantifying the environmental benefits of material efficiency and circular economy strategies and ii) when applying indicators relating to the circularity of materials these should also be supported by LCA studies.

The Inventory Déjà Vu Experiences Assessment (IDEA) is the only screening instrument proposed to evaluate Déjà vu (DV) experience. Here we intended to validate the Italian version of IDEA (I-IDEA) and at the same time to investigate the incidence and subjective qualities of DV phenomenon in Italian healthy adult individuals on basis of an Italian multicentre observational study. In this study we report normative data on the I-IDEA, collected on a sample of 542 Italian healthy subjects aging between 18 to 70 years (average age 40, range 18-70) with a formal educational from 1-19 years. From September 2013 to March 2016 were recruited 542 healthy volunteers from ten outpatient neurological clinics in ItalyAll participants (i.e family members of neurological patients enrolled, medicine’s student, physicians) had no neurological or psychiatric illness and they gave informed consent to participate in the study. All subjects enrolled had self-administered the questionnaire and they are able to complete I-IDEA test without any support. In total 396 (73%) of the 542 healthy controls had DV phenomenon. The frequency of DV was inversely related to age as well as to derealisation, jamais vu, precognitive dreams, depersonalization, paranormal activity, remembering dreams, travel frequency and daydreams (all P<0.012). The Italian version of IDEA maintains good properties in Italian version, thus confirming that this instrument is reliable for detecting and characterising the DV phenomenon.

Coastal inundation is an increasing problem. Sea-level rise will greatly increase the frequency and depth of inundation, forcing vulnerable communities to adapt. Communities will need to decide when and how to adapt. The process of decision-making along adaptive pathways is now being used internationally to plan for adaptation over time by anticipating decision points in the future however it unfolds. This process requires risk and uncertainty considerations to be transparent in the scenarios used in such planning. We outline a framework for uncertainty identification and management within coastal hazard assessments which recognizes different types of decision and identifies the types of uncertainty that must be accounted for, such as statistical, scenario and deep uncertainty types. We show how coastal-inundation hazard can be mapped and presented in a way that clearly separates sources of uncertainty, so that they are transparent within a dynamic adaptive pathways planning process. Traditional coastal inundation maps show inundated area only. We present maps of inundation depth and frequency which clearly show the degree of exposure, where that exposure occurs, and how much sea-level rise can be tolerated. The new uncertainty framework and mapping techniques can better identify decision points and their expected time range, which provides more useful input to the adaptation process than traditional coastal inundation assessments.

The city administration of China planned numerous metro projects and more metros can hardly avoid undercrossing a bridge. While metro shield construction when undercrossing a bridge (MSCUB) is frequently located in complicated natural and social context, which made the construction process more susceptible to safety accidents. Therefore, it is crucial to look into safety risk of MSCUB. The paper identified the safety risk factors during SSCUR by using literature review and experts’ evaluation, proposed a novel safety risk assessment model by integrating CFA and FER, and then selected a project case to test the validity of the suggested model. Research results show that (a) a safety risk factors list of MSCUB was identified, including 4 first-level safety risks and 37 second-level safety risk factors; (b) the proposed safety risk assessment model can be used to measure the risk values of the overall worksite safety risk, the first-level safety risks and the safety risk factors of MSCUB; (c) environment-type safety risk and personnel-type safety risk have higher risk values when shield construction undercrossing a bridge; (d) when compared to worker-type safety risk, manager-type safety risk is the higher risk value. The research can enrich the theoretic knowledge of MSCUB safety risk assessment and provide references to safety managers for conducting scientific and effective safety management on the construction site when subway undercrossing a river.

Technological advances in game-mediated robotics provide an opportunity to engage children with cerebral palsy (CP) and other neuromotor disabilities in more frequent and intensive therapy by making personalized, programmed interventions available 24/7 in children’s homes. Though shown to be clinically effective and feasible to produce, little is known of the subjective factors impacting acceptance of what we term assistive/rehabilitative (A/R) gamebots by their target populations. This research describes the conceptualization phase of an effort to develop a valid and reliable instrument to guide the design of A/R gamebots. We conducted in-depth interviews with 8 children with CP and their families who had trialed an exemplar A/R gamebot, PedBotHome, for 28 days in their homes. The goal was to understand how existing theories and instruments were either appropriate or inappropriate for measuring the subjective experience of A/R gamebots. Key findings were the importance of differentiating the use case of therapy from that of assistance in rehabilitative technology assessment, the need to incorporate the differing perspectives of children with CP and those of their parents into A/R gamebot evaluation, and the potential conflict between the goals of preserving the quality of the experience of game play for the child while also optimizing the intensity and duration of therapy provided during play.

In light of growing global supply chain instability and carbon neutrality initiatives, South Korea has highlighted the need for a circular economy to reduce its reliance on natural resources. As a critical strategy for promoting the circular economy, remanufacturing has become essential because of its ability to improve resource efficiency and reduce environmental impacts. The automotive sector, which accounts for 80% of the remanufacturing industry, plays a critical role in these efforts. Turbochargers, primarily made of cast iron, represent approximately 20% of sales in the sector and are significant contributors to greenhouse gas emissions, making them an important target for emission reduction. This study examined the greenhouse gas emissions associated with turbochargers across multiple remanufacturing cycles using the LCA method. The results indicated an approximate decrease of 50%, 48%, and 46%, based on the comparative analysis between brand-new products and those remanufacturing one-, two-, and three times. Comparing brand-new and remanufactured products does not fully capture the key advantage of remanufacturing. This advantage lies in its ability to extend the products life cycle by using core parts as primary raw materials and reducing the consumption of new resources. Therefore, it is important to consider the environmental impact of remanufacturing within an expanded process where brand-new products are included in the entire life cycle. Using this approach, the accumulated annual greenhouse gas reduction effect for multiple remanufacturing indicated decreases of approximately 25%, 32%, and 35% for remanufacturing one, two, and three times, respectively, compared to using only brand-new products. This study shows that multiple remanufacturing reduces greenhouse gas emissions compared to the use of brand-new products. In particular, as remanufacturing is repeated, the product lifespan can be extended from three years to up to 12 years with a concomitant decrease in annual greenhouse gas emissions. These findings provide valuable data for modeling and encouraging the greenhouse gas reduction potential driven by remanufacturing across various industrial sectors.

In 2011, Korea installed artificial structures on four rivers to secure water resources and reduce flood damage; however, these structures have altered ecosystems and aquatic communities. This study analyzed fish communities and environmental variables at 72 sites in the Geumgang River. Fish communities and environmental variables before weir installation were examined using site data from 2008–2009. The results showed that Cyprinidae dominated the 70 observed species. A self-organizing map categorized the 72 sites into 4 groups based on fish communities. Sensitive and insectivorous species decreased, whereas tolerant and omnivorous species increased from Groups I to IV. Twenty-one indicator species were identified, with fewer and less distinct distribution patterns in Groups II and III than in Groups I and IV. The fish assessment index (FAI) showed a decline in grades A and B and an increase in grades C and D from Groups I to IV. Correlation analysis between FAI and environmental variables indicated that fish communities in the Geumgang River were mainly influenced by water quality, reflecting altitude gradients and pollution levels. This study’s findings are anticipated to significantly inform water management strategies for the Geumgang, Yeongsangang, Nakdonggang, and Hangang Rivers.

Green Infrastructure (GI) is increasingly prioritised in landscape policy and planning, due to its potential to benefit ecosystems and enhance wildlife conservation. However, due to the uneven distribution of protected areas (PAs) and the fragmentation of habitats more generally, multi-level policy strategies are needed to create an integrated GI network bridging national, regional and local scales. To help address this challenge, we present proposals to integrate GI elements for the province of Almeria, southeast Spain. We delimit and define key GI elements, and apply GIS-based connectivity tools to generate ecological corridors connecting the province’s 35 PAs. Currently, the PAs are threatened by the advance of intensive greenhouse agriculture and tourism-related urban growth of the municipalities to which they belong. Common patterns in the location of the most suitable areas for the development of GI can be identified. New GI networks would be located along the coast, specifically in the western part of the study area. They would also occupy the valleys of the main rivers of the province. Around 50% of the area occupied by the proposed corridors would be located in places of medium and high suitability for the movement of species between core areas.

This paper explores Augmented Reality (AR) as an innovative active methodology for student assessment in the Higher Education Authority of Arcoverde, proposing an alternative to the traditional assessment model. It investigates how AR can transform the educational process, making assessments more interactive, engaging and effective. The study focuses on three main issues: the impact of AR on student motivation and engagement, its effectiveness in improving content comprehension and retention, and the challenges and limitations of its implementation as an assessment method. Employing dialectical methods, action research and literature reviews, this research documents a 34% increase in students’ content comprehension and a 47% increase in their participation in practical activities. These findings suggest that, despite the technical and curricular integration challenges, AR not only improves assessment methodologies, but also enhances learning, promoting a more dynamic and interactive environment. The overall objective is to demonstrate the ability of AR to replace conventional approaches with a more innovative and efficient practice, highlighting the importance of this technology in advancing pedagogical practices and improving student performance. This study sheds light on the relevance of AR in the educational field, encouraging its adoption to enrich the learning and assessment experience.

In this paper, aiming at the safety evaluation of ultimate bearing safety capacity of composite pile bridge foundation, the symmetrical reliability method with forward and inverse analysis con-sidering the randomness of parameters is proposed to evaluate the safety performance of com-posite pile foundation. The proposed method, considering the randomness of parameters, was used to calculate the safety factor of ultimate bearing capacity of composite pile foundation to meet the prescribed target reliability requirements. Through the example calculation of the safety coefficient of pile foundation, the results show that the statistical characteristics of random vari-ables that affect the safety coefficient of pile foundation have a significant impact. The degree of the safety coefficient depends on the probability distribution type and distribution parameters of the random parameters, among which the more important is the variation characteristics of the random variables. The stronger the parameter variability, the lower the safety level of the struc-ture. During design and evaluation, it is necessary to measure the safety reserve of pile founda-tions in accordance with engineering practice to ensure the safe construction and well operation of the pile.

Credit business is a vital part of the bank's core business, which has an extremely important impact on the bank's income and development. In the operation of credit business, credit risk assessment is particularly crucial, and accurate risk assessment can minimize risks while maximizing the bank's returns. We propose a method to optimize credit risk assessment using machine learning techniques. In this work, we employ a random forest machine learning model to process and analyze large amounts of loan application data. By using correlation analysis, information enrichment, etc., the characteristics that have the most impact on credit risk assessment are screened. Subsequently, the model was constructed using a random forest algorithm. Random forests improve the generalization ability and accuracy of the model by building multiple decision trees and introducing randomness between these trees. In the experimental analysis part, we compare the performance of various models on the German credit dataset, and the results show that the deep learning model outperforms the traditional machine learning model in most indicators, verifying the effectiveness of our method.

(1) Background: The aim of the work was to characterize the climatic evolution and change based on the Multi Criteria Classification through the dynamics of bioclimatic indices in viticulture across Italy and its regional administrative boundaries, focusing on latitudes and elevations. (2) Methods: The impact of climate change on viticulture in Italy was analysed and spatialized with reference to historical data from 1991 to 2021 and to the Future Scenarios up to 2080 assumed by SSP2-4.5 and SSP5-8.5, taking into account 13 GCMs. (3) Results: The bioclimatic indices have all shown a significant trend in the historical period, with an increase in temperature and a decrease in precipitation, reflecting their effects on the entire Italian territory with respect to HI, up to 44°N for CI and up to 46°N for DI, regardless of altitude. The Future Scenarios highlighted a shift towards the warmer classes of the two temperature-based indices (HI and CI) for both SSPs, especially for altitudes up to 900 m a.s.l.. The DI-based classification based on DI remained relatively stable in Italy over time, although DI values will become increasingly negative in the near future. (4) Conclusions: The climate in Italy is warming, especially in the south and in the coastal regions. By 2080, more areas will be “Very Hot” with “Warm Nights.” Drought will also increase and have a negative impact on viticulture. The importance of higher latitudes and altitudes in mitigating the effects of climate change justifies the continuing trend towards the relocation of vineyards as a medium-term solution and as an alternative to targeted cultivation methods that must be adopted in the short-term to safeguard the suitability of an area to quality viticulture.

This study evaluates the R3THA™ technology-supported assessment protocol for home-based rehabilitation in children with cerebral palsy (CP). It focuses on the reliability and validity of R3THA™ in assessing hand and arm function, comparing kinematic assessments with standard clinical assessments. Conducted during a 4-week summer camp, the study involved children with CP aged 3-18, assessing their functional and impairment levels. The findings suggest that R3THA™ is more reliable for children aged 8 and older, indicating that age significantly influences the protocol's effectiveness. Results also showed that R3THA-AP's kinematic measurements of hand and wrist movements were positively correlated with the Box and Blocks Test Index (BBTI), reflecting hand function and dexterity. Additionally, R3THA-AP's accuracy metrics for hand and wrist activities aligned with the Melbourne Assessment 2's Range of Motion (MA2-ROM) scores, suggesting a meaningful relationship between R3THA-AP data and clinical assessments of motor skills. However, no significant correlations were observed between R3THA-AP and MA2's accuracy and dexterity measures, indicating areas for further research. These findings validate R3THA-AP's utility in assessing motor abilities in CP, supporting its integration into clinical practice.

This study introduces a method for quantitatively assessing the complexity and predictability of fish behavior in closed systems through the application of information entropy, offering a novel lens to understand how fish adapt to environmental changes. Utilizing simulations rooted in a random walk model for fish movement, we delve into entropy fluctuations under varying environmental conditions, including responses to feeding and external stimuli. Our findings underscore the utility of information entropy in capturing the intricacies of fish behavior, particularly highlighting the synchrony in collective actions and adaptations to environmental shifts. This research not only broadens our comprehension of fish behavior but also paves the way for its application in fields like aquaculture and resource management. Through our analysis, we discovered that smaller grid sizes in simulations capture detailed local fluctuations, while larger grids elucidate general trends, pinpointing a 2.5m grid as optimal for our study. Moreover, changes in swimming speeds and behavioral adaptations during feeding were quantitatively analyzed, with results illustrating significant behavior modifications. Additionally, employing a Gaussian Mixture Model helped to clarify the nuanced changes in fish behavior in response to altered light conditions, demonstrating the layered complexity of fish responses to environmental stimuli. This investigation confirms the efficacy of information entropy as a robust metric for evaluating fish shoal behavior, offering a fresh methodology for ecological and environmental studies, with promising implications for sustainable management practices.

With challenged early detection came the collapse of a school roof, initiating a storm of public mistrust and hundreds of schools under investigation in the United Kingdom. The culprit is a poorly understood material heavily used in the 1950s to mid-1990s, reinforced autoclaved aerated concrete (RAAC). As a lightweight material with excellent insulation, RAAC was mainly used in roof and floor panels in many parts of the world. However, RAAC has a comparatively weak compressive strength, poor reinforcement anchorage, and high permeability and susceptibility to creep. The uniqueness of RAAC properties is exacerbated by poor manufacturing, negligent construction and maintenance as well as structural deviations from original design intent. Current guidance lacks in specifying RAAC management strategies beyond recommendations for periodic surveying. This paper delivers a state-of-the-art review of the material properties and structural performance of RAAC to recommend improved measures characterised by non-destructive testing methods and digital asset management. The reviewed literature targets understanding the influence of variable environmental exposure conditions, reinforcement condition, operational loading variations, structural deficiencies, and ageing, to predict their effect on the mechanism of RAAC failure. The established risk factors of RAAC are examined to inform of feasible response strategies against specific issues encountered in affected RAAC structures such as inadequate bearings, compromised transverse reinforcement, and environmental conditions.

Temporomandibular disorders (TMDs) refer to a group of conditions that affect the temporomandibular joint, causing pain and dysfunction in the jaw joint and related muscles. The diagnosis of TMDs typically involved clinical assessment through operator-based physical examination, self-reported questionnaire and imaging studies. To objectivize the measurement of TMD, this study aims at investigating on the feasibility to use machine-learning algorithms fed with data gathered from low-cost and portable instruments to discriminate the presence of TMD in adult subjects. Through this aim, the experimental protocol involved fifty participants, equally distributed between TMD and healthy subjects, acting as control group. The diagnosis of TMD has been performed by a skilled operator through the typical clinical scale. Participants underwent to a baropodometric analysis by using a pressure matrix and the evaluation of the cervical mobility through inertial sensors. Nine machine-learning algorithms belonging to support vector machine, k-nearest neighbours and decision tree were compared. The k-nearest neighbours based on cosine distance was found as the best performing, achieving performance of 0.94, 0.94 and 0.08 for the accuracy, F1-score and G-index, respectively. These findings open the possibility to use such methodology to support the diagnosis of TMDs in clinical environments.

Macrophages are well known for the involvement in the biocompatibility, as well as biodistribution, of nano(bio)materials. Although there are a number of rodent cell lines, they may not fully recapitulate primary cell responses; particularly for those of human cells. Isolation of tissue resident macrophages, from humans, is difficult and may result in insufficient cells with which to determine the possible interaction with nano(bio)materials. Isolation of primary human monocytes, and differentiation to monocyte-derived macrophages, may provide a useful tool with which to study, further, these interactions. To that end, we developed a standard operating procedure for this differentiation, as part of the REFINE project, and used it to measure the secretion of bioactive molecules from M1 and M2 differentiated monocytes in response to model nano(bio)materials, following an initial assessment of pyrogenic contamination which may confound, potential, observations. The SOP was deployed in two partner institutions with, broadly, similar results. The work presented here shows the utility of this assay but, highlights the relevance of donor variability in responses to nano(bio)materials. Whilst donor variability can provide some, logistical, challenges to application of such assays, this variability is much closer to the heterogeneous cells that are present in vivo, compared to homogeneous, non-human, cell lines.

Viral pathogens pose a substantial threat to public health and necessitate the development of effective remediation and antiviral strategies. This short communication aimed to investigate the antiviral efficacy of disinfectants on the surface proteins of human pathogenic viruses. Using in silico modeling, ligand binding energies (LBEs) of selected disinfectants were predicted and combined with their environmental impacts and costs through eco-pharmaco-economic analysis (EPEA). Results revealed the binding affinities of chemical disinfectants to viral proteins varied significantly (p

Attention to the work-related musculoskeletal disorders (WMSDs) involve also statistical surveys showing an increasing trend in the incidence of WMSDs. Technological development retrieves new tools and methods for the assessment of physical load at work. In addition to the conventional questionnaires and scaling assessment systems, these methods are mostly based on the direct sensing of appropriate parameters, which allows more precise quantification. The aim of this paper is to compare the assessment of ergonomic risk through current legislative regulations. A Captiv wireless sensor system was used at a car headlight quality control assembly workplace for sensing, data acquisition and data processing. During the evaluation of the postures and movements at work, we discovered differences in the applicable standards: Decree 542/2007 Coll. (Slovak legislation), STN EN 1005-4+A1, French standards default in the Captiv system. Standards define the thresholds for hazardous postures with significant differences in several evaluated body segments, which also affects the final evaluation of the measurements. Based on the results of our research, we found that respondents were in an acceptable position for approximately 63% of the total duration of the work activity in terms of the Legislative method, 44% with Captiv and 27% with Standards method.

Background: In 2020, the incidence of cancer was 844,778 cases among the population aged 0 to 19 years. Ninety percent of the population under 18 years of age lives in low- and middle-income countries, where cancer survivors report adverse outcomes. disease, which negatively impacts individuals’ general health, emotional state and external factors such as academic performance. Therefore, the objective of this article was to report the performance of the WCST and the sociodemographic characteristics of oncopediatric patients from Cali, Colombia. We report the reliability of the WCST instrument and indicate the association between the type of cancer and executive functioning in patients. Methods: In a cross-sectional observational study, 24 oncopediatric patients were interviewed and evaluated via the WCST. Results: The mean age was 12.08 years (3.98), 20.8% were women, 70.8% had a diagnosis of leukemia, 8 patients had acquired brain deficits, and more than 75% had adequate functioning in terms of the indicators of executive functions. Robust statistics were used to explore the differences between the types of diagnoses and performance in executive functions, and no statistically significant differences were found (p = 0.156). We accumulated evidence that the WCST has a reliable Cronbach's α of 0.804 and that oncopediatric patients without brain deficits had high scores for executive functions (p = 0.002) with a moderate effect size (0.727). Conclusions: The WCST is reliable for discriminating executive function among pediatric cancer patients. The evidence suggests that there are no differences between the types of cancer evaluated and executive functioning in the participants.

Patient access to new oncology drugs in Canada is only possible after navigating multiple sequential systemic checkpoints for national regulatory approval, health technology assessment (HTA) and collective government price negotiation. These steps delay access and prevent health care providers from being able to prescribe optimal therapy. Eighteen Canadian oncology clinicians from the medicine, nursing and pharmacy professions met to develop consensus recommendations for defining reasonable government performance standards around process and timeliness to improve Canadian cancer patients’ access to best care. A modified Delphi methodology was used to confirm strong consensus on 30 questions involving five themes: accountability, disparities, endpoints, timeliness, and cost-effectiveness. It was agreed that greater transparency is required across regulatory and HTA processes. Health professionals in oncology are frustrated for their patients because they are unable to deliver the modern guideline-supported therapies they want to provide due to delays in approval or funding. Canadian patients and their health care providers request improvements in timely access to life-saving therapeutics in line with other countries. Clinicians expect urgent improvements in our health systems to give our patients their best chance of survival.

Direct assessments of executive function (EF) are increasingly used in research and clinical settings, with a central assumption that they assess “universal” underlying skills. Their use is spreading globally, raising questions about the cultural appropriateness of assessments devised in Western, industrialized countries. We reviewed multidisciplinary evidence and theory to identify sets of cultural preferences that may be at odds with the implicit assumptions of EF assessments. These preferences relate to motivation and compliance; cultural expectations for interpersonal engagement; contextualized vs. academic thinking; cultural notions of speed and time; the willingness to be silly, be incorrect, or do the opposite; and subject-matter familiarity. In each case, we discuss how the cultural preference may be incompatible with the assumptions of assessments, and how future research and practice can address the issue. Many of the cultural preferences discussed differ between interdependent and independent cultures and between schooled and unschooled populations. Adapting testing protocols to these cultural preferences in different contexts will be important for expanding our scientific understanding of EF from the narrow slice of the human population that has participated in the research to date.

Flooding during the rainy season poses a significant threat to the city of Hargeisa, impacting the well-being of both its residents and the local ecosystems. This research focuses on urban flood control, with a specific emphasis on finding sustainable solutions for managing large stream in Hargeisa. The study identifies five key dimensions, including infrastructure, transportation, environmental soil, life, and property, as critical factors in addressing the issue. By employing a comparative method and collecting data through closed-ended questions, the research aims to analyze and weigh eleven potential solutions, seeking to identify the most effective approaches. The findings of the study indicate that constructing a dam emerges as a promising and sustainable solution, with a weightage of 70 percent. This highlights the potential of a dam in mitigating the impact of floods in the region. Additionally, considering the government's economic capacity, the implementation of check dams is identified as another viable option, with a weightage of 95 percent for reducing the flood power of the stream. These solutions offer practical and effective measures to address the recurring problem of flooding in Hargeisa. To support future decision-making and planning, the research underscores the need for establishing a comprehensive rainfall data database. This database would store relevant information on rainfall patterns, enabling better understanding and prediction of flood events. The study emphasizes the importance of collaboration between local government authorities, environmental organizations, and stakeholders to develop and implement effective flood control strategies. This research provides a systematic approach that can inform and benefit regional and global researchers, policymakers, and municipal governments in their efforts to address urban flood control challenges, not only in Hargeisa but also in similar contexts worldwide.

Post-extubation dysphagia (PED) can lead to serious health problems in critically ill patients. Contrasting its high incidence rate of 12.4% reported in a recent observational study, many ICUs lack routine bedside screening, likely due to limited awareness. This study aimed to establish baseline data on the current approaches and the status of perceived best practices in PED screening and treatment, as well as to assess awareness of PED. A nationwide cross-sectional, online survey was conducted in all fourteen adult ICUs in the Republic of Cyprus in June 2018, with a 100% response rate. Over 85% of ICUs lacked a standard screening protocol for PED. The most commonly reported assessment methods were cough reflex testing and the water swallow test. Treatment approaches included muscle strengthening exercises without swallowing and swallowing exercises. Only 28.6% of ICUs acknowledged PED as a common issue. The study identified significant gaps in awareness and knowledge regarding PED screening and treatment in Greek-Cypriot ICUs. Urgent implementation of comprehensive dysphagia education programs within the units is necessary, and interdisciplinary collaboration among nurses, intensivists, and speech and language therapists is crucial to improve the quality of care provided.

Negative thermal quenching (NTQ) denotes that the integral emission spectral intensity of a given phosphor increases continuously with increasing temperature up to a certain elevated temperature. NTQ has been a subject of intensive investigation in recent years and a large number of phosphors were reportedly to have exhibited NTQ. In this paper, a collection of results in the archival literature about NTQ of specific phosphors are discussed from a macroscopic viewpoint in the following three aspects:1) Could NTQ of a given phosphor be reproducible?2) Could the associated data for a given phosphor exhibited NTQ be in line with the law of conservation of energy?3) Could NTQ of a given phosphor be demonstrated in a prototype WLED device? By analyzing typical cases based on common sense, it is hoped to increase the awareness for the issues with the papers reporting NTQ of the specific phosphors based on spectral intensity along with for the importance of keeping stability and consistency of the measurement conditions in temperature-dependent spectral intensity measurement which is a prerequisite for the validity of the measurement results.

The study proposes a theoretical method for evaluating the 'safety against derailment' indicator of a specialized train composition for the transportation of very long rails. A composition of nine wagons, suitable for the transportation of rails with a length of 120 m, is considered. For the remaining recommended rail lengths, the number of wagons is reduced or increased, the method being modified depending on the required configuration. In accordance with the requirements of EN 14363:2019, the composition is in a curve with a radius of R=150 m. The rails bend, some of them contact the vertical stanchions of the wagon and cause additional transverse forces, which are balanced in the rail track. This is a prerequisite for derailment of the vehicle. The goal of the study is to determine the additional transverse forces that arise because of the bent rails. The task is statically indeterminate, and considering the dimensions of the rails, its solution becomes seriously difficult. For the purposes of the study, the finite element method was used. Based on the displacements of the support points of the rails (caused by the geometry of the curve) the bending line of the elastic load is determined and the forces in the supports are calculated. A group of five rails is considered, with results multiplied proportionally for cases other than five. The resulting forces are considered when determining the derailment safety criterion defined by EN 14363:2019.

This study determined the temporal variation of PM2.5 in ambient air in Thohoyandou and further assessed the associated health risks. The levels of PM2.5 were quantified for a period of 1 year (April 2017-April 2018) using the gravimetric method. There was no significant difference (P-value = 0.18) in concentrations of both PM2.5 samples collected during weekdays (11.29 µg.m-3) and weekends (9.86 µg.m-3). However, higher concentrations of PM2.5 were measured in spring and the lowest was measured in summer. The cancer risk obtained for PM2.5 (2.21 × 10−5, 3 × 10-4, and 5 × 10-4 for infants, children, and adults respectively) in the outdoor air of Thohoyandou has exceeded the limit values by the USEPA and WHO, implying a significant risk for the whole population. For non-carcinogenic risks, the HQ values were 2.60, 4.81, and 2.60 for infants, children, and adults respectively. The HQ value &gt;1 indicates a non-carcinogenic risk to the residents in Thohoyandou and a higher risk to children. Moreover, PM2.5 in Thohoyandou is responsible for 0.15% and 0.13% of deaths resulting from cardiovascular disease and lung cancer respectively for adults above 30 years. PM2.5 is causing adverse health effects in Thohoyandou as deduced from the health risk assessment. Therefore, it is recommended that further epidemiological studies be conducted in Thohoyandou to estimate the burden of disease due to exposure to particulate matter and suitable controlling policies be arranged to reduce particulate matter.

The present work fronts the human pose estimation problem, developing a method that enables automated ergonomic risk assessment. A research methodology is developed to calculate joint angles from digital snapshots or videos by using computer vision and machine learning techniques to get a more accurate ergonomic risk assessment. Starting from an ergonomic analysis, the study explores the use of a semi-supervised training method to detect the skeletons of workers. The research methodology developed aims to infer the positions and angles of the joints, to calculate the criticality index based on the RULA scores and fuzzy rules. Then, to prevent work-related musculoskeletal disorders (WMSD), improve production capacity and decrease the ergonomic risk, the system uses joint with a collaborative robot to support the worker in carrying out the most critical operations. The method has been tested on a real industrial case in which manual assembly activities of electrical components are conducted. The approach developed can overcome the limitations of recent developments based on computer vision or wearable measurement, sensors by performing an assessment with an objective and flexible ap-proach to postural analysis development.

The construction safety risks (such as landslides or slumps) of the high-fill subgrade are characterized by uncertainty and variability. In order to ensure the construction safety of the high-fill subgrade of the expressway, a comprehensive risk assessment model of high-fill subgrade construction according to the combination weighting method based on game theory was established. Firstly, settlement rate, lateral differential settlement, horizontal displacement at the foot of the slope, deep horizontal displacement, and excess pore pressure were selected as evaluation indicators, and an evaluation index system of high-fill subgrade was constructed. Secondly, the subjective and objective weights were obtained via the analytic hierarchy process and entropy method. Furthermore, the optimized weights were obtained by introducing game theory, and the construction risk of the high-fill subgrade was evaluated and analyzed using the fuzzy comprehensive evaluation method. Finally, based on the high-fill section of the Zhijiang-Tongren Expressway in Hunan Province (China), the evaluation model was validated through field measurement data. The results show that the safety scores obtained using the three methods of analytic hierarchy process, entropy method, and combination weighting method based on game theory are similar. The combination weighting evaluation model can correct the evaluation result error caused by a single weight and avoid information delay caused by the manual processing and analysis of monitoring data. The high-fill subgrade safety evaluation grade based on the combination weighting method and game theory is consistent with the engineering situation, and its fault tolerance range is within 20%. The evaluation model proposed in this study can scientifically and effectively evaluate the safety risks of high-fill subgrade construction, significantly improving the safety and reliability during the construction process.

(1) Background: Surgical phases form the basic building blocks for surgical skill assessment, feedback and teaching. Phase duration itself and its correlation to clinical parameters has not yet been investigated. Novel commercial platforms provide phase indications but have not been assessed for accuracy yet. (2) Methods: We assess 100 robot-assisted partial nephrectomy videos for phase duration based on previously defined proficiency metrics. We develop an annotation framework and subsequently compare our annotations to an existing commercial solution (Touch Surgery, Medtronic™). We subsequently explore clinical correlations between phase durations and peri-operative parameters. (3) Results: Objective and uniform phase assessment requires precise definitions derived from an iterative revision process. Comparison to a commercial solution shows large differences in definitions across phases. BMI and duration of renal tumor identification correlate positively, as well as tumor complexity and both tumor excision and renorraphy duration. (4) Conclusions: Surgical phase duration can be correlated with certain clinical outcomes. Further research should investigate if retrieved correlations are also clinically meaningful. This requires increasing dataset sizes and facilitation through intelligent computer vision algorithms. Commercial platforms can facilitate this dataset expansion and help unlock the full potential, provided the disclosure of phase annotation details.

Lymphedema is a chronic and debilitating disease that affects up to 250 million patients worldwide. Recent advances in understanding its pathophysiology, along with improved diagnosis and microsurgical techniques, have enhanced our ability to cope with the challenging task of treating this disease. This review provides an overview of the disease from a surgeon's point of view, including existing imaging modalities used for preoperative assessment, as well as surgical procedures used in its treatment. Advantages and drawbacks of various existing modalities used for pre or intraoperative assessment of lymphatic vessels are discussed. Lymphedema treatment has shifted from palliative debulking procedures (liposuction and direct excision) to those aimed at restoring lymphatic flow and countering the pathophysiology of the disease (lymphaticovenous anastomosis and vascularized lymph node transfer). A combination of both approaches can result in a synergistic benefit for patients and are discussed in this review. Despite recent advances, some controversies persist, and further studies are needed to better define surgical treatment algorithms.

Previous research via cell experiments has shown that ultrafine particles (UFPs, particles less than 100 nm) emitted from Three-Dimensional desktop printers (3D printers) had cytotoxicity. However, a few particles from different filaments and their cytotoxicity combinations have been tested. Here we quantify emissions of UFPs and use Air-Liquid Interface (ALI) from one commercially available filament extrusion desktop 3D printer utilizing three different filaments by controlled experiments. A549 cells were exposed at the ALI to UFPs generated by a working 3D printer for an average of 45 minutes and 90 minutes. Twenty-four hours after exposure, cells were analyzed for percent cytotoxicity grown on the 24-well ALI insert (LDH assay). UFP exposure resulted in decreased cell viability (significantly increased LDH levels). The result shows that Acrylonitrile butadiene styrene (ABS) has the most significant particle emission. ALI exposures enable in vitro testing of mixtures of particles such as UFP from a 3D printer. ABS is the only filament with a significant difference compared with the HEPA control in 90 minutes of exposure (p-value &lt;0.05). ABS and PETG we used during the experiment presented a significant difference compared with the HEPA control in 45 minutes of exposure.A screening analysis of potential exposure to these products in a typical environment suggests caution should be used when operating many printer and filament combinations in poorly ventilated spaces or without the aid of combined gas and particle filtration systems.

When undertaking wind assessment around buildings using large eddy simulation (LES), the implementation of the integral length scale at the inlet for inflow generation is controversial, as real atmospheric length scales require huge computational domains. While length scales significantly influence inflow generation in the domain, their effect on the downstream flow field has not yet, been investigated. In this paper, we validate the effectiveness and accuracy of implementing a reduced turbulence integral length scale for inflow generation in LES results at the rooftop of low-rise buildings and develop a technique to estimate the real local length scales using simulation results. We measure the wind locally and calculate the turbulence length scales from the energy spectrum of the wind data and simulation data. According to these results, there is an excellent agreement between the length scale from simulation and measurement when they are scaled with their corresponding freestream/inlet value. These results indicate that a reduced integral length scale can be safely used for LES to provide a reliable prediction of the energy spectrum as well as the length scales around complex geometries. The simulation results were confidently employed to obtain the best location for a wind turbine installation on low-rise buildings.

Damage assessment is one of the most crucial issues for bridge engineers, especially for existing steel bridges. Among several methodologies, the vibration measurement test is a typical approach in which the natural frequency variation of the structure is monitored to detect the existence of damage. However, locating and quantifying the damage is still a big challenge. In this regard, the artificial intelligence (AI)-based approach seems a potential way to accomplish those obstacles. This study deploys a comprehensive campaign to determine all dynamic parameters of a pre-damage steel truss bridge structure. Based on the results of mode shape, natural frequency, and damping ratio, a finite element model (FEM) is created and keeps updating. The artificial intelligence network's input data will be analyzed and evaluation from damage cases. The trained artificial neural network model will be curated and evaluated to confirm the approach's feasibility. During the actual operational stage of the steel truss bridge, this damage assessment system is showing good performance in terms of monitoring the structural behavior of the bridge under some unexpected accidents.

The emergence of novel pathogens is a well-known epidemiological risk, however, the unexpected emergence of a truly novel coronavirus-mediated pandemic, SARS-nCOV2 (COVID-19), underscored the significance of understanding this contagion. The COVID-19 pandemic caused unprecedented social, economic, and educational disruptions on a scale never seen before. In addition to social protocols, the development of safe, effective, affordable COVID-19 vaccines was developed within months, the cornerstone to mitigating this pandemic. We present an overview of the evolution of the SARS-nCOV2 pandemic from a historical perspective and describe its biology and behavior, especially the immunological aspects of the disease. We further provide an overview of COVID-19 therapeutics, treatment, and vaccine development. It is critical to understand the transmission mechanism of the disease to control and mitigate its progression. We describe cohort studies to identify secondary and tertiary syndromes. The transmission characteristics help its diagnosis and detection. During the pandemic, a lot of emphasis was placed on personal protection equipment. It is now concluded that the virus particles spread by aerosol dispersion. While the recommended distance may not be sufficient, the use of personal protective equipment and social distancing may be helpful in close-quarters environments. Such protocols in conjunction with safe and effective vaccines and personal hygiene are among the safe practices. While we learn from our experience, this review provides a holistic view of COVID-19, so we are better prepared for a future pandemic. In addition to a wide-spectrum automated analytics system, we also suggest that the use of artificial intelligence in conjunction with data analytics can further reduces the risk of speculatively diagnosing agents incorrectly, to eliminate future pandemic, where the novelty can be the cloud-based presumptive diagnosis.

Strengthening the analysis and risk assessment of the pig epidemic will help to better prevent and mitigate epidemic risks and promote high-quality development of the pig industry. Based on the systematic grasp of the situation of live pig epidemics, a risk assessment index system was constructed, and the spatial and temporal variation characteristics of the risk of pig epidemics in China were explored by the entropy method. In recent years, the overall trend in pig epidemics in time first increased and then decreased, and in space, the trend in the acceleration of the spread across the country continued to weaken. China still faces challenges, such as many types and a wide range of diseases, large total livestock breeding and weak epidemic prevention and control capacity, and a large risk of introduction of foreign animal epidemics. The spatial and temporal variation in the pig epidemic risk was obvious; there was one high-risk area, two higher-risk areas and 10 medium-risk areas in recent years, and the epidemic risk was highest in Beijing, Hainan, Liaoning, Tibet and Zhejiang. However, there were significant differences in the regional distribution of the risk of pig epidemics in different years. To further build a secure “defense system” for the high-quality development of the pig industry, it is recommended to improve the monitoring and early warning system of pig epidemic risk, perfect the pig epidemic prevention and control system, and strengthen the regional collaboration mechanism of epidemic prevention and control.

This paper presents the goals and components of a quantitative energy balance assessment framework to define PEDs flexibly in three important contexts: the context of the district's density and RES potential, the context of a district's location, induced mobility and the context of the dis-trict's future environment and its decarbonized energy demand or supply. It starts by introducing the practical goals of this definition approach: achievable, yet sufficiently ambitious to be inline with Paris 2050 for most urban and rural Austrian district typologies. It goes on to identify the main design parts of the definition: system boundaries, balancing weights and balance targets and argue how they can be linked to the definition goals in detail. In particular we specify three levels of system boundaries and argue their individual necessity: operation, including everyday mobili-ty, including embodied energy and emissions. It argues that all three pillars of PEDs, energy effi-ciency, onsite renewables and energy flexibility can be assessed with the single metric of a prima-ry energy balance when using carefully designed, time-dependent conversion factors. Finally, it is discussed how balance targets can be interpreted as information and requirements from the sur-rounding energy system, which we identify as a "context factor". Three examples of such context factors, each corresponding to the balance target of one of the previously defined system bounda-ries operation, mobility and embodied emissions are presented: Density (as a context of opera-tion), sectoral energy balances and location (as a context for mobility) and an outlook of a person-al emission budgets (as a context for embodied emissions). Finally, the proposed definition framework is applied to seven distinct district typologies in Austria and discussed in terms of its design goals.

Practitioners who assess the risk associated with urban trees often factor in the presence or absence of visual tree defects when determining whether a tree may fail. While these defects are a main fixture in many tree risk assessment systems and best management practices, the research supporting their usefulness in predicting tree failure during storms is limited. When looking at past research involving populations of storm-damaged trees, there are several defects that have never predicted failure (or have been associated with reduced rates of failure). In this study, we took a closer look at four such defects: codominant branches; branch unions with included bark; multiple stems originating from the same point; and overextended branches. After Hurricane Ian, we revisited 1519 risk assessed trees where one of these four defects was identified as the primary condition of concern. Fourteen of these trees experienced branch failure during the storm (which hit the study area as a downgraded tropical storm). Upon closer inspection, none of these failures occurred at the defect of concern. Our findings indicate that none of the defects assessed appeared to increase the likelihood of tree failure in the species tested. Our results are in line with past research on these defects derived from post-storm assessments and analysis.

The province of Jaén (Andalusia, Spain), despite being declared the European territory with the largest number of defensive constructions (castles and fortifications), has few conservation plans, with many remains included on the Red List of Spanish Heritage lying abandoned. This presents a problem for the conservation of the landscape and the optimal use of the province’s tourism potential. Through the study case of Magaña hamlet two actions are proposed to alleviate this situation: The creation of an archaeological and environmental risk chart with which to answer such questions as “How have climate change, anthropic alterations and environmental charac-teristics affected the state of conservation of certain heritage sites?” and to put forward proposals for improving their protection using as a basis digital and technological tools, such as remote sensing (SAR), taking advantage of data from the Sentinel 2A and 2B satellites, HBIM, RPAS and GIS. To foster the promotion of smart tourism by digitalising and virtualising tourist routes and archaeological remains by building a Smart Tourism App for mobile devices. Finally, public administrations will be apprised of the need to implement a conservation policy for cultural as-sets and their surroundings in a simple, quick and cost-effective manner.

This paper presents the life cycle assessment results of a study of plastic recycling via hydrothermal upgrading (HTU), a chemical recycling technology. It was investigated due to its potential to address current gaps in the plastic recycling system, largely due to several plastic packaging materials and formats that cannot be processed by traditional mechanical recycling technologies (primarily due to technoeconomic reasons). As society transitions towards a net-zero-based circular economy, assessments should be conducted with a futuristic outlook, preventing costly mistakes by employing the right technologies in the right areas. HTU can generate up to 76% reduction in climate change impacts when compared with comparable end-of-life treatment technologies whilst conserving material with the system. Additionally, further reductions could be achieved by changes in electricity consumption within the study. This represents a new insight to chemical recycling of polymers by establishing a prospective life cycle assessment study that looks to introduce a step-change in the recycling system. By creating a transparent cut-off model with consistent allocation, it highlights the benefits of introducing this technology as opposed to the current model of disposal through incineration or landfill.