Multiple myeloma (MM) is a genetically complex disease that results from a multistep transformation of normal to malignant plasma cells in the bone marrow. However, the molecular mechanisms responsible for the initiation and heterogeneous evolution of MM remain largely unknown. A fundamental step needed to understand the oncogenesis of MM and its response to therapy is the identification of driver mutations. The introduction of gene expression profiling (GEP) in MM was an important step in elucidating the molecular heterogeneity of MM and its clinical relevance. Since some mutations in myeloma occur in non-coding regions, studies based on the analysis of mRNA provide more comprehensive information on the oncogenic pathways and mechanisms relevant to MM biology. In this review, we discuss the role of gene expression profiling in understanding the biology of multiple myeloma together with the clinical manifestation of the disease, as well as its impact on treatment decisions and future directions.

Hadhramout Initiative Against Corona (HIAC ) formed a working group of clinicians relevant to the management of COVID-19 to formulate clinical practice guidelines (CPG) for clinicians caring for the patients infected with COVID-19 in Yemen. The regional guidelines on the management of COVID-19 were thoroughly reviewed and its applicability was assessed for Yemen. HIAC’s recommendations covered (2) sections: the first one is the diagnosis, including case definition, risk stratification of the affected cases, investigations (prioritization of reverse transcription-polymerase chain reaction (RT-PCR) testing, D-dimer, chest x-ray, and chest computed tomography, while the second part covers the treatments (mainly Favipiravir, Remdesivir, Hydroxychloroquine, and Glucocorticoid, Anticoagulants, and Supportive measures). In conclusion, the adoption of cost-effective and evidence-based guidelines in Yemen will standardize the management of the patients infected with COVID-19 and protect both the patients and the health care workers from malpractice.

The police occupy a very important position in the entire criminal justice system in Nigeria. The nature of police relationship with the people and the manner in which the public were handled at the station and on the street daily within the community affects the way the people perceive them and the level of cooperation they get from the people in curbing crime in the society. The study took place in Zaria, Kaduna state, Northern Nigeria .The study population was the police in Zaria. Three police stations (Zaria City, Sabon Gari and Samaru police stations) were purposively selected reflecting the socio-cultural and demographic backgrounds of Zaria residence and population. The Divisional Police officers and police officers in-charge of crime were interviewed. The police crime and incidence records were examined while the general conduct and social atmosphere of the police and police stations were observed. Using in- depth interview, observational method and police records, it was discovered that the socio economic status of suspects affected how they were treated by the police in the police stations studied. Also the environment a suspect lives affected how they were treated too by the police. It was recommended that the police make the rule of law their guide in the handling of suspects in the police stations irrespective of socio-demographic variable or area of habitation of the suspects. Police brutality and violations of citizen’s rights should be checked by senior police officers while community-policing style should be implemented across communities in Nigeria.

Proteins possess complex three-dimensional structures, and these structures are stable only within specific ranges of temperature which mostly correspond to the temperature ranges of the host organisms. However, few exceptional proteins, called heat-stable proteins, are stable at temperatures that are substantially higher than those tolerated by the host organisms themselves. Most of the heat-stable proteins possess heat stability to perform their functions at high temperatures, but some of them are intrinsically heat-stable due to their structure. Heat-stable proteins are usually divided into three or four groups depending upon the intricacies of their structures and thermal behaviors. Their peculiar property, i.e. heat-stability, makes them very valuable in applications such as polymerase chain reaction, industrial processes requiring high temperature, and protein engineering. Heat-stability also makes it feasible to purify such proteins, from the rest of the heat-labile proteins, using a simple heat-treatment method. Moreover, heat treatment can be used as a combined cell-lysis and protein purification step which, as compared to conventional methods, can result in a higher yield of heat-stable proteins. Furthermore, some special heat-stable proteins, i.e. intrinsically disordered proteins (which include the proteins involved in important neurodegenerative diseases), need heat-treatment step, in some cases, as the only way for their successful purification and study. Hence, this paper provides a first-ever comprehensive review of all major aspects of heat-stable proteins, i.e., their structure, evolution, classification, significance, and heat-treatment mediated purification.

Optical and mechanical properties of multilayer coatings depend on the selected layer materials and the deposition technology; therefore, knowledge of the performances of thin films is essential. In the present work, titanium dioxide (TiO2) and silicon dioxide (SiO2) thin films have been prepared by plasma ion-assisted deposition (PIAD). The optical, structural, and mechanical properties of thin films have been investigated using spectrometer/ellipsometer, X-ray diffraction (XRD), atomic force microscopy (AFM), and laser interferometer. The results show that TiO2 film fabricated by PIAD induces a high refractive index, wide optical band gap, amorphous structure, smooth surface, and tensile stress. In the case of SiO2 film, high bias voltage leads to dense structure and compressive stress. As an application, a three-wavelength high reflectance at 632.8, 808, and 1550nm is optimized and deposited. The dependence of total stress in the multilayer on the substrate temperature is studied as well. In conclusion, it is demonstrated that PIAD is an effective method for the preparation of ultralow stress TiO2/SiO2 multilayer films. The achieved stress is as low as 1.4Mpa. The result could provide guidance to the stress optimization of most optical components without prefiguring, backside coating, and post-deposition treatments.

Duplex and Super Duplex Stainless Steels are very prone to secondary phases formation related to ferrite decomposition at high temperatures. In the present paper the results on secondary phase precipitation in a 2510 Duplex Stainless Steel, heat treated in the temperature range 850-1050 °C for 3-30 minutes are presented. The precipitation starts at grain boundaries with a consistent ferrite transformation for very short times. The noses of the TTP curves are at 1000 °C for σ-phase and at 900 °C for χ-phase, respectively. The precipitation sequence involves a partial transformation of χ into σ, as previously evidenced in 2205 and 2507 grades. Furthermore, the experimental data were compared to the results of Thermo-Calc calculations.

Our first modern global pandemic is caused by a nanosized lipid vesicle, called SARS-CoV-2. Its molecular structure and biogenesis have remarkable similarities with Extracellular Vesicles (EVs, most notably exosomes) that are constantly shed by all cells during their life. Their resemblance may not be a coincidence. Growing body of evidence has shown that EVs have significant roles in various biological processes, including viral infection, transmission and anti-viral response. Drawing comparison with the virus might shed light on how we could fight the COVID-19 disease. This may include novel EV research and diagnostics technologies as well as novel EV-based treatments.

Background: Cancer has been one of the most critical health problems during the past decades which require serious consideration, especially in developing countries. Methods: 80 parents of the children with different types of cancers were studied via both questionnaire and person-to-person interview after announcing their informed consent. Results: The highest delay in patients' initial referral was due to the following factors: lack of attention or ignoring the first symptoms, delay in referring to the physician, low economic status and even lack of family support for the patient. In addition, visiting several doctors after the initial diagnosis, uncertainty about the first proposed method, and high cost of treatment can be mentioned as the main causes of delays in the start of treatment. Conclusion: Education plays an important role in identifying the signs of cancer. In addition, proper relationship and cooperation between the health system and physicians as well as provision of adequate information to patients could lead to the long-term cooperation of these patients in continuing their treatment.

The nuclear receptor superfamily comprises a large group of proteins with functions essential for cell signaling, survival and proliferation. There are multiple distinctions between nuclear superfamily classes defined by hallmark differences in function, ligand binding, tissue specificity, and DNA binding. In this review, we utilize the initial classification system, which defines subfamilies based on structure and functional difference. The defining feature of the nuclear receptor superfamily is that these proteins function as transcription factors. The loss of transcriptional regulation or gain of functioning of these receptors is a hallmark in numerous diseases. For example, in prostate cancer the androgen receptor is a primary target for current prostate cancer therapies. Targeted cancer therapies for nuclear hormone receptors have been more feasible than others to develop due to ligand availability and cell permeability of hormones. To better target these receptors, it is critical to understand their structural and functional regulation. Given that late-stage cancers often develop hormone insensitivity, we will explore the strengths and pitfalls of targeting other transcription factors outside of the nuclear receptor superfamily such as the signal transducer and activator of transcription (STAT).

In this study, the effect of heat treatment was investigated to influence the occurrence of fracture during manufacturing process of Alloy B steel with boron contents as high as 130 ppm. As the content of boron increases, it affects the phase transformation temperature and texture. The development of {111}<uvw> components in the γ-fiber is affected depending on the austenite fraction after phase transformation. The Alloy B steel indicated that the increase in the boron content increased the α to γ phase transformation temperature such that sufficient transformation did not occur in the normalizing condition. The cracks occurred at the point of the transition from elastic to plastic deformation in the ND direction during the rolling process, thereby resulting in failure. Therefore, it is necessary to avoid the intermediate heat treatment condition in which γ-fiber does not fully develop, i.e., an imperfect normalization.

Ti and Ti alloys are materials usually used in contact with hard tissue for applications such as artificial joints and dental implants. Ti6Al4V is a very common alloy used for dental implants, owing to its good mechanical properties and corrosion resistance. Nevertheless, because of uncertainties regarding the toxicity of vanadium and its influence on the human body, other Ti alloys containing no vanadium and retaining suitable properties are used. In this work Ti6Al4V and Ti6Al7Nb were oxidized in a water solution of calcium acetate (Ca(CH3COO)2) and calcium glycerophosphate (Ca(PO4CH(CH2OH)2) by Plasma Electrolytic Oxidation (PEO) for 20 minutes and then were hydrothermally treated (HTT) in water (pH=7) and in potassium hydroxide (KOH) solution (pH=11) for 2 hours at 200°C in a pressurized reactor. The surface morphologies, elemental composition and phase components were characterized by Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS) and X-Ray Diffraction (XRD), respectively. The surface roughness was measured by Atomic Force Microscope (AFM) and thickness measurements were made by SEM and thickness gauge. Also, corrosion tests were made to evaluate the corrosion behavior of the two alloys. The aim of this study is to compare two viable Ti alloys, Ti6Al4V and Ti6Al7Nb, and to attain on their surface hydroxyapatite (HA) coating improving the osseointegration, as it simulates a human bone.

Recent advances and demands in clinical applications drive a large amount of research to hydroxyapatite (HA) composite coatings fabricated by plasma spray. However, lower degree of HA crystallinity related to high temperature exposure in plasma spray usually leads to rapid weakening and disintegration of HA coatings and often promotes inflammatory responses in the surrounding tissue. In this research, graphene nanosheet (GNS) reinforced HA coatings were fabricated using plasma spray and followed by heat and hydrothermal treatment (hereafter referred to as thermal treatment). The addition of GNSs resulted in competing phenomenon to influence HA crystallinity viz. increased portion of the partially melted/unmelted zones and higher cooling rate during splat formation, leading to slight increase in HA crystallinity (~46.0-51.3%) in the as-sprayed coating. XRD and FTIR results showed that thermal treatment was capable of inducing significant transformation of amorphous HA to the crystalline form and removing other foreign non-HA compounds through regaining OH- ion, and therefore HA coatings displayed ~45.5-47.1% improvements in HA crystallinity regardless of addition or not of the GNS nanofillers. Microstructure observations revealed that thermal treatment enabled microcrack propagation due to stresses caused by crystallisation and phase transformations, and the residual partially melted/unmelted zone of the thermally treated GNS/HA coating was significantly decreased in size. More importantly, the added GNSs contributed greatly to the significant increase in surface nanoroughness of the thermally treated HA coatings owing to the fact that much more structural defects along with the GNSs mainly induced by thermal treatment might act as nucleation sites to accelerate HA nanoparticle precipitation, which would be beneficial for the improved adhesion strength of the osteoblast cells on the coating surface.

Coordinated sets of extremely numerous digital data, on a given social or economic event, are treated by Artificial Intelligence tools to obtain reasonably accurate, valuable predictions. The same approach, applied to biomedical issues, as how to choose the right drug to completely cure a given cancer patient, does not reach satisfactory results. It is the “organized biological complexity”, which requires a different systems approach, to integrate, in an Augmented Intelligence strategy, statistical computations of digital data, network construction of “omics” findings, well-designed mathematical models and new experiments in an iterative pathway to reconstruct the “logic” beneath the “organized complexity”, as shown here for Systems Metabolomics of cancer. On this basis new diagnostic approaches, able to identify precision drug treatments, as well as new discovery strategy for more effective anti-cancer drugs are described.

In this work, we synthesized chitosan grafted-poly acrylic acid (CS-g-PA) through surface-initiated atom transfer radical polymerization (SI-ATRP). We also studied the adsorption process of copper and lead ions onto CS-g-PA surface. Adsorption equilibrium studies indicated pH 4.0 as the best pH for the adsorption process, while the maximum adsorption capacity for Pb2+ ions was 98 mg*g-1 and for Cu2+ was 164 mg*g-1, higher adsorption capacities than chitosan alone (CS), where Pb2+ was only 14.8 mg*g-1and Cu2+ was 140 mg*g-1, respectively. Furthermore, the adsorption studies indicated that Langmuir model describes all the experimental data. All these results suggest that the new CS-g-PA polymers had potential as adsorbent for hazardous and toxic metal ions produced by different industries.

The correlation and comorbidity between depression and chronic pain have been observed for a long time. Generally, it is considered that the two conditions reinforce each other, whereas the causal relationship between them is not clear. However, some evidence suggested that chronic pain may reverse the progression of depression in some cases. This article presents a selective review of clinical and pharmacological relationship between depression and pain, and their interactions at neurochemical and neurobiological levels. In addition, we open a discussion on a recent case report of repeated success of using short but continuous pain (SCP) during meditation as the only treatment for depression, compared to initial success but no remission with other conventional antidepressants on the same patient. Together this review proposes an updated model for depression and its various treatments that is based on synaptic and system homeostasis. More importantly, it suggests that SCP may benefit depression recovery through its properties that are different from either acute or chronic pain and represents a novel research area that has been largely neglected to date.

Among all the processing technologies of heat-treatable aluminum alloys like 2219 aluminum alloy, using friction stir welding (FSW) as the joining technology and using electromagnetic forming (EMF) for plastic forming technology both have obvious advantages and successful applications. Therefore, there is a broad prospect for the compound technologies which can be used on the 2219 aluminum alloy to manufacture the large-scale thin-wall parts in the astronautic industry. The microstructure and mechanical properties of 2219 aluminum alloy under the process compounded of FSW, heat treatment, and EMF were investigated by means of tensile test, optical microscope (OM), and scanning electron microscope (SEM). The results show that the reduction of strength, which was caused during the FSW process, can be recovered effectively by the post-welding heat treatment composed of solid solution and aging, while the ductility was still reduced after heat treatment. Under the compound technology of FSW, heat treatment, and EMF, the forming limit of 2219 aluminum alloy decreased distinctly due to the poor ductility of the welding joint. A ribbon-pattern, which was formed due to the banded structure caused by FSW process, was found on the fracture surface of welded 2219 aluminum alloy after EMF treatment. During the EMF process, because of the effects of induced eddy current, a unique structure, which was manifested as a molted-surface appearance under the SEM observation, was formed as the material fractured.

The combination of interstitial hyperthermia treatment (IHT) with high dose rate brachytherapy (HDR-BT) for prostate cancer treatment and has the potential to improve clinical outcome, since it highly enhances the efficiency of cell kill, especially when applied simultaneously. Therefore, we have developed the ThermoBrachy applicators. To effectively apply optimal targeted IHT, treatment planning is considered essential. However, treatment planning in IHT is rarely applied since it is regarded difficult to accurately calculate the deposited energy in the tissue in a short enough time for clinical practice. In this study, we investigated various time-efficient methods for fast computation of the electromagnetic (EM) energy deposition resulting from the ThermoBrachy applicators. Initially, we investigated the use of an electro-quasistatic solver. Next, we extended our investigation to the application of geometric simplifications. Furthermore, we investigated the validity of the superpositioning principle, which can enable adaptive treatment plan optimization without the need for continuous recomputation of the EM field. Finally, we evaluated the accuracy of the methods by comparing them to the golden standard Finite-Difference Time-Domain calculation method using gamma-index analysis. The simplifications considerably reduced the computation time needed, improving from &gt;12 h to a few seconds. All investigated methods showed excellent agreement with the golden standard by showing a &gt;99% passing rate with 1%/0.5 mm Dose Difference and Distance-to-Agreement criteria. These results allow the proposed electromagnetic simulation method to be used for fast and accurate adaptive treatment planning.

This paper proposes a methodology for the development and its Verification and Validation(V&amp;V) of safety-rated software. The development methodology is based on the structured analysis and structured design methodology, which has been proven in the field of safety software development during long period. The suggested the development and the V&amp;V methodology additionally focuses on the quality attributes 3C+T (completeness, Correctness, Consistency and traceability), which are important criteria in IEC international standards. The software development life cycle is compiled from IEC international standardization, which are of the requirements analysis phase, design phase, implementation phase, testing phase, installation/commissioning phase, and operation &amp; maintenance phases. The activities of the development process method were defined from requirements analysis to implementation, and the activities of the verification and validation were defined to include the scope of the developer's activities and then to include the test phase, installation/commissioning phase, and operation phases additionally. In other words, testing phase performed by the developer was defined as informal testing, and testing performed by the verifier according to test criteria, test plans, and test procedures was defined as formal testing. According to proposed methodology, the requirements phase defines the sequence of Entity Relationship Diagram (ERD)-Context Diagram-Data Flow Diagram (DFD), functional decomposition process and defines operational scenario. In the design phase, module design such as task analysis and task allocation were defined. In the implementation phase, we listed the coding guidelines that must be followed for safety-related system. The test phase defined the test criteria, test plan, test procedure, and test result report activities. In the installation/commissioning and operation phases, recommendations for improving reliability, quality, and safety were proposed for deliverables such as user documentation and technical documentation.

This review explores the application of the conservative management model for pain to sports-related concussions (SRCs), framing concussions as a distinct form of pain syndrome with a pathophysiological foundation in central sensitization. Drawing parallels with proven pain management models, we underscore the significance of a proactive approach to concussion management. Recognizing concussions as a pain syndrome allows for the tailoring of interventions in alignment with conservative principles. This review first covers the epidemiology and controversies surrounding prolonged concussion recovery and persistent post-concussion symptoms (PPCS). Next, the pathophysiology of concussions is presented within the central sensitization framework, emphasizing the need for early intervention to mitigate the neuroplastic changes that lead to heightened pain sensitivity. Five components of the central sensitization process specific to concussion injuries are highlighted as targets for conservative interventions in the acute period: peripheral sensitization, cerebral metabolic dysfunction, neuroinflammation, glymphatic system dysfunction, and pain catastrophizing. These proactive interventions are emphasized as pivotal in accelerating concussion recovery and reducing the risk of prolonged symptoms and PPCS, in line with the philosophy of conservative management.

Prediabetes, a pivotal phase in glucose metabolism between normalcy and diabetes, exerts a profound influence on the aging process and the risk of age-related diseases. This comprehensive review delves into the intricate web of blood-based biomarkers that collectively expedite senescence, marking the transition from a state of health to age-related complications. Key findings underscore the significance of diverse biomarkers, such as telomere length, p16INK4a, senescence-associated secretory phenotype (SASP) factors, DNA methylation clocks, advanced glycation end products (AGEs), inflammatory and oxidative stress markers, circulating hormones, and additional factors like folate, B12, osteocalcin, and more. Not only do these biomarkers serve as indicators of senescence, but they actively fuel chronic inflammation, oxidative stress, and metabolic dysregulation, all of which contribute to accelerated aging. The implications of this understanding are profound, as prediabetes emerges as a critical period in an individual's life, influencing various physiological systems, including the vascular and neural systems, metabolic functions, hormonal regulation, and bone health. Recognizing the profound influence of prediabetes on senescence provides a foundation for personalized intervention strategies to mitigate age-related complications and promote healthy aging. Future research directions call for a more diverse array of biomarkers, in-depth exploration of their roles, and the development of tailored precision medicine strategies to ensure a holistic understanding and effective management of prediabetes-induced senescence and its implications for aging. This knowledge has far-reaching implications for public health and clinical practice, emphasizing the need for early detection and intervention in prediabetic individuals to enhance the quality of life in an aging population with diverse needs.

Malaria is one of the leading causes of illnesses and deaths in Africa at large and Nigeria in particular, especially amongst pregnant women and children under the age of five years. Our research revealed that though the government has deployed so many intervention systems to contend with this death-causing vector—the mosquitoes, malaria related deaths (MRDs) have continued to increase. This is because people have not sufficiently adopted those intervention systems to protect themselves. Further enquiries into the ineffective compliance of the people to the intervention systems revealed that the interventions are passive in nature. Based on these, we set up three measurable research outcomes to enable us to determine the appropriateness of persuasive technology in solving the malaria problem. We technically avoided a one-size-fits-all design approach and adopted Participatory System Design (PSD) and User-Centered Design (UCD) approaches in our system design methodologies. Well-structured questionnaires were used to extract information from the participants. The data obtained from the research survey was used in modeling the intervention system. The research was conducted in three phases: baseline, development and deployment of an intervention system—the Malaria Prevention and Control Support System (MPCSS), and an evaluation study to determine the performance of the intervention system. The research led to the following achievements: (1) encouraged an increase in the number of people who participated in malaria prevention and control activities by lowering the rate of malaria cases from 96.9% to 68.5% and increasing ownership of mosquito nets from 54% to 85.5%; (2) demonstrated that persuasive technology could be used to increase public awareness and knowledge of a given subject as noted in our evaluation result; and (3) demonstrated that persuasive technology is a veritable active intervention to combat malaria.

A recent report from the American Heart Association in 2018 shows that over 103 million American adults have hypertension. The angiotensin-converting enzyme (ACE) (EC 3.4.15.1) is a dipeptidyl carboxylase that, when inhibited, can reduce blood pressure through the renin-angiotensin system. ACE inhibitors are used as a first-line medication to be prescribed to treat hypertension, chronic kidney disease, heart failure among others. It has been suggested that ACE inhibitors can reduce the symptoms in mouse models. Despite the benefits of ACE inhibitors, previous studies also have suggested that alterations in the ACE gene are risk factors for Alzheimer’s disease (AD) and other neurological diseases. In mice, overexpression of ACE in the brain reduces symptoms of the AD-model systems. Thus, we find opposing effects of ACE on health. To clarify the effects, we dissect the functions of ACE as follows: (1) angiotensin-converting enzyme that hydrolyzes angiotensin I to make angiotensin II in the renin-angiotensin system; (2) amyloid-degrading enzyme that can hydrolyze beta-amyloid and reduce amyloid toxicity. The efficacy of the ACE inhibitors is well established in humans, while the knowledge specific to AD remains to be open for further research. We provide an overview of ACE and inhibitors that link a wide variety of age-related comorbidities from hypertension to Alzheimer’s disease to aging. ACE also serves as an example of the middle-life crisis theory that assumes deleterious events during the midlife, leading to age-related later events.

Papillary thyroid carcinoma (PTC) has two main histologic variants: classical-PTC (CL-PTC) and follicular variant PTC (FV-PTC). Recently, due to its similar features to benign lesions, the encapsulated FV-PTC variant was reclassified as noninvasive follicular thyroid neoplasm with papillary-like nuclear features (NIFTP). Nonetheless, specific molecular signatures are not yet available. It is well known that telomere-related genome instability is caused by inappropriate DNA repair of dysfunctional telomeres and that mechanisms involved in the damaged telomere repair processing may led to detrimental outcomes, altering the 3D nuclear telomere and genome organization in cancer cells. This pilot study aimed to evaluate whether a specific nuclear telomere architecture might characterize NIFTP, potentially distinguishing it from other PTC histologic variants. Our findings demonstrate that 3D telomere profiles of CL-PTC and FV-PTC were different from NIFTP and that NIFTP more closely resembles follicular thyroid adenoma (FTA). NIFTP has longer telomeres than CL-PTC and FV-PTC samples and telomere length overlaps in NIFTP and FTA. There was no association between BRAF expression and telomere length in all tested samples. Our data showing that 3D nuclear telomere organization is altered differently in thyroid cancer variants, suggest that this parameter might guide clinical management of NIFTP. Although further investigations in a larger cohort of patients are necessary to corroborate our observations, telomere-related genomic instability might be of value in the diagnosis of NIFTP and allow for a more appropriate selection of the correct treatment.

The identification of homogeneous flood regions is essential for regional flood frequency analysis. Despite the type of regionalization framework considered (e.g., region of influence or hierarchical clustering), selecting flood-related attributes to reflect flood generating mechanisms is required to discriminate flood regimes among catchments. To understand how different attributes perform across Canada for identifying homogeneous regions, this study examines five distinctive attributes (i.e., geographical proximity, flood seasonality, physiographic variables, monthly precipitation pattern, and monthly temperature pattern) for their ability to identify homogeneous regions at 186 gauging sites. We add an automatic component to enhance identification of homogeneous regions is proposed as an addition to the region of influence framework. Results are presented spatially for Canada to assess patterning of homogeneous regions. Memberships of two selected regions are investigated to provide insight into membership characteristics. Sites in eastern Canada are highly likely to identify homogeneous flood regions, while the western prairie and mountainous regions are not. Overall, it is revealed that the success of identifying homogeneous region is relevant to local hydrological complexities, to whether considered attribute reflects primary flooding mechanism, and to whether catchment sites are clustered in small geographic region. Formation of effective pooling groups affords the extension of record lengths across the Canadian domain (where gauges typically have <50 years of record), facilitating more comprehensive analysis of higher return periods floods need for climate change assessment.

Indirubin-3′-monoxime (I3M) exhibits anti-proliferative activity in various cancer cells; however, its anti-cancer mechanism remains incompletely elucidated. This study revealed that I3M promotes the expression of death receptor 5 (DR5) and tumor necrosis factor (TNF)-related apoptosis-inducing ligand (TRAIL) in HCT116 p53+/+ cells, resulting in caspase-mediated apoptosis. However, this study demonstrated that HCT116 p53-/- cells are insensitive to I3M-mediated apoptosis, indicating that I3M-induced apoptosis depends on the p53 status of HCT116 cells. Additionally, in HCT116 p53-/- cells, I3M significantly increased Ras expression, while in HCT116 p53+/+ cells, it reduced Ras expression. Furthermore, I3M remarkably increased the production of reactive oxygen species (ROS), which were reduced in transient p53 knockdown, indicating that I3M-mediated apoptosis is promoted by p53-mediated ROS production. Our results also showed that I3M enhanced transcription factor C/EBP homologous protein (CHOP) expression, resulting in endoplasmic reticulum (ER) stress-mediated DR5 expression, which is upregulated by ROS production in HCT116 p53+/+ cells. Moreover, co-treatment with TRAIL synergistically enhanced I3M-induced DR5 expression, thereby triggering TRAIL-induced apoptosis of HCT116 p53+/+ cells, which was interfered by a DR5-specific blocking chimeric antibody. In summary, I3M potently enhances TRAIL-induced apoptosis by upregulating DR5 expression via p53-mediated ROS production in HCT116 p53+/+ cells. However, HCT116 p53-/- cells were resistant to I3M-mediated apoptosis, suggesting that I3M could be a promising anti-cancer candidate against TRAIL-resistant p53+/+ cancer cells.

As a result of the cancer immunotherapy revolution hundreds of clinical trials of the newly approved immunotherapies are now under way to improve responses. Not unexpectedly, the 2018 Nobel Prize in Physiology or Medicine was awarded to James P. Allison and Tasuku Honjo for their development of cancer therapy by blockade of co-inhibitory signals. While success stories of terminal cancer patients achieving complete remissions are accumulating, not enough research has been done into the risks of the new therapies. Since the use of immunotherapy is becoming more common, and is expected to develop into first- and second-line treatments, immunotoxicity and autoimmunity are emerging as the nemesis of immunotherapy. Immune-related adverse events (IrAEs) could affect any tissue, their incidence may reach up to 90% of patients and toxicity is dose-dependent. While the combination of two immune checkpoint inhibitors (ICIs) increased efficacy, the incidence of severe adverse events was also increased. Apparently, ICIs cannot be restricted to the targeted anti-tumor T cell population. The long lasting objective of cancer regression can only be achieved by paying a price: tolerance to healthy self tissues is compromised. In the face of an ipilimumab induced pan-lymphocytic activation, a therapeutic paradigm shift is required. The task is not desperately trying to put the genie back in the bottle by immune suppressive treatments, but instead harnessing the autoimmune forces by an off label low-dose combined anti-CTLA-4 and anti-PD1 antibody blockade, which is supplemented with conventional interleukin-2 stimulation and hyperthermia. The proof-of-principle of the low-dose-combination therapy was demonstrated in a heavily pre-treated triple negative breast cancer (TNBC) patient with far advanced pulmonary metastases and severe shortness of breath, who had exhausted all conventional treatment. Her pulmonary metastases went into complete remission with transient WHO I-II diarrhea and skin rash. She lived for 27 months after starting the low-dose-combination therapy. She had recurrence as a sternal mass and pleural metastases up to 3 cm. Since the low-dose-combination protocol consists only of approved drugs and treatments, this exceptional response should instigate further research efforts.

The use of New-age (Nano) Modified Emulsions (NME) for the stabilisation of marginal materials for use in the upper-pavement layers of roads have been proven in laboratories, through Accelerated Pavement Tests (APT) and in practice. In addition, material design methods have been developed based on the scientific analysis of granular material mineralogy and the chemical interaction with the binder to design a material compatible NME stabilising agent for naturally available (often marginal) materials. However, the introduction of any new disruptive technology in a traditionally well-established industry, such as the road construction industry, is usually associated with considerable resistance. This is especially relevant when the new technology enables the use of granular materials traditionally considered to be of an unacceptable quality in combination with relatively new concepts such as New-age (Nano) Modified Emulsions (NME). In practice, few road construction projects are without any problems. The introduction of new-technologies obviously makes it an easy target to blame for any non-related problem that may arise during construction. This article aims to assist in pre-empting, recognising, preventing and resolving material or non-material related construction problems through the correct identification of the cause of the problem and recommending the best, most cost-effective way to correct any deficiencies on site.

Chronic Obstructive Pulmonary Disease (COPD) is a progressive respiratory disorder that poses significant challenges in treatment adherence. This systematic review aims to evaluate the effectiveness of mobile health (mHealth) interventions compared to conventional therapy in improving treatment adherence among COPD patients. A total of 13 randomized controlled trials and comparative cohort studies were included, all investigating the impact of mHealth interventions, such as medication reminders and remote monitoring, in adult COPD patients. Studies with participants under 18 years of age or those with severe comorbidities were excluded. The review identified 4,688 records through comprehensive searches in databases including MEDLINE, WEB OF SCIENCE, and SCOPUS. Of these, 13 studies met the inclusion criteria. Results showed that mHealth interventions improved treatment adherence in some studies, particularly in exercise and symptom monitoring . However, the evidence was inconsistent, and variations in outcomes were reported across different studies. The review concludes that while mHealth interventions show potential in enhancing treatment adherence in COPD patients, further high-quality research with larger sample sizes is required to confirm these findings and support the integration of mHealth into clinical practice. The need for more robust study designs is also emphasized to address current limitations in evidence.

Substance abuse and psychiatric disorders are two prevalent and interrelated public health concerns that often coexist, leading to complex clinical scenarios. This comorbidity poses significant challenges in diagnosis, treatment, and understanding the causal relationships between the two conditions. Frequently, one disorder is neglected in favor of the other, and misconceptions abound regarding which condition precipitates the other. This article explores the common comorbidity of substance abuse and psychiatric disorders, delving into the prevalence, diagnostic challenges, treatment implications, and the bidirectional nature of causality. By examining current research and clinical practice, we aim to shed light on the misconceptions and emphasize the need for integrated approaches to effectively address both conditions concurrently.

This paper explores the critical role of biomathematics in cancer research, focusing on how mathematical models enhance our understanding of tumor growth and optimize treatment strategies. It begins with an overview of cancer biology, highlighting the complexities of tumor dynamics and the molecular mechanisms driving growth. The paper then delves into various mathematical modeling approaches, including deterministic, stochastic, and agent-based models, illustrating their applications in predicting tumor behavior and treatment responses. Case studies demonstrate the real-world impact of these models on optimizing chemotherapy, radiation therapy, and immunotherapy. Challenges such as data availability, model complexity, and clinical translation are discussed, alongside future directions in the field, including advances in computational power and personalized medicine. Ultimately, this research emphasizes the transformative potential of biomathematics in improving cancer treatment outcomes and underscores the importance of interdisciplinary collaboration in advancing the field.

Background. While selective use of antibiotics for infected pancreatic necrosis (IPN) in acute pan-creatitis (AP) is recommended, studies indicate a high rate of inadequate treatment. Methods. A search of PubMed, Scopus, and Cochrane databases was conducted, focusing on primary research and meta-analyses. Data were categorized based on core concepts, and a narra-tive synthesis was performed. Results. The searches yielded 1016 publications. After assessing 203 full texts and additional sources, 80 studies were included. The answers obtained were: (1) Preventive treatment does not decrease the incidence of IPN or mortality. Given the risks of bacteria resistance and fungal infec-tions, antibiotics should be reserved for highly suspected or confirmed IPN; (2) The diagnosis of IPN not always require microbiological samples, as clinical suspicion or CT signs can suffice. Early di-agnosis and treatment may be improved by using biomarkers such as procalcitonin and novel mi-crobiological methods; (3) When indicated, early initiation of antibiotics of IPN is a key determinant in reducing mortality; (4) Antibiotics with good penetration into pancreatic tissue covering Gram-negative and Gram-positive bacteria should be used. Routine antifungal therapy is not recommended; (5) The step-up approach, including antibiotics, is the standard for IPN manage-ment; (6) Antibiotic duration should be kept to a minimum and should be based on the quality of source control and patient condition. Conclusions. Early antibiotic therapy is essential for the treatment of IPN, but prophylactic anti-biotics are not recommended in AP. High-quality RCTs are required to better understand the role of antibiotics and antifungals in AP management.

This study aims to evaluate the effectiveness of inactivating Salmonella enteritidis in fresh chicken breast by irradiation using a combination of short-wave UV (0, 3, 6, 9, 12 and 15 J / cm2) and a natural antimicrobial such as caffeine (0, 5, 10, 15 and 20 nM/g) as alternative proposals to conventional techniques to reduce pathogens in food. The temperatures used were from 2 to 22°C. The most suitable models were double Weibull in 60% of cases with an adjustment of R2 0.9903-0.9553 and Weibull + cola, in 46.67%, with an adjustment of R2 of 0.9998-0.9981. Noting that the most effective combination in the reduction of Salmonella was 12 J/cm2 of UV light and 15 nM/g of caffeine, with a reduction of 6 CFU/g and an inactivation rate of 0.72. The synergistic effect was observed by increasing caffeine and UV light. Furthermore, the physic-chemical characteristics of the food matrix were not affected by the combination of both technologies. Therefore, these results suggest that this combination can be used in the food industry to effectively inactivate Salmonella enteritidis, without deteriorating product quality.

The fixed and random effects models are popular methods for identifying the causal effects of treatment. First, I introduce the two-way fixed effects model and show a class of the estimators for the random effects models. Misidentification may occur in these models due to the treatment effect heterogeneity. Then, I propose the differential error component models to address such problems while the models exclude the fixed effects of units and time periods and consider the random effects of units and time periods. Meanwhile, I present a simulation of a staggered design and revisit the application in (De Chaisemartin and D'Haultfoeuille, 2020). The results demonstrate that one additional newspaper increases the 0.31% average effect of the presidential turnout and the 1.05% average effect when the newspapers’ changes are non-negative, where the proposed estimators are robust and efficient.

Glioblastoma (GBM) is an aggressive brain cancer characterized by significant molecular and cellular heterogeneity, complicating treatment efforts. Current standard therapies, including surgical resection, radiation, and temozolomide (TMZ) chemotherapy, often fail to achieve long-term remission due to tumor recurrence and resistance. A pro-oxidant environment is in-volved in glioma progression, with oxidative stress contributing to the genetic instability that leads to gliomagenesis. However, the generation of reactive oxygen species (ROS) results in the dysregulation of antioxidant defenses in GBM cells, creating a vulnerability that can be thera-peutically exploited. Evaluating pro-oxidant therapies in brain tumors is crucial due to their po-tential to selectively target and eradicate cancer cells by exploiting the elevated oxidative stress levels inherent in these malignant cells, thereby offering a novel and effective strategy for overcoming resistance to conventional therapies. This study investigates the therapeutic potential of doxorubicin (DOX) and photodynamic therapy (PDT) with Me-ALA, focusing on their effects on redox homeostasis. Basal ROS levels and antioxidant gene expression (NFE2L2, CAT, GSR) were quantitatively assessed across GBM cell lines, revealing significant variability probably linked to genetic differences. DOX and PDT treatments, both individually and in combination, were ana-lyzed for their efficacy in inducing oxidative stress and cytotoxicity. An in silico analysis further explored the relationship between gene mutations and oxidative stress in GBM patients, providing insights into the molecular mechanisms underlying treatment responses. Our findings suggest that pro-oxidant therapies, such as DOX and PDT in combination, could selectively target GBM cells, highlighting a promising avenue for improving therapeutic outcomes in GBM.

This work aimed to develop an anionic cellulose nanofiber (CNF) bio-adsorbent from palm date tree waste and to investigate its removal efficiency against cationic methylene blue dye from contaminated water. Palm date pulp was first prepared from palm date leaves through acid hydrolysis using H2SO4, followed by hydrolysis in a basic medium using KOH, in which the process completely removed the components of hemicellulose, lignin, and silica. To obtain anionic CNF, the resulting pulp was further treated with H2SO4, followed by centrifugation. Biogel formation of the CNF suspension was promoted by sonication, where its removal efficiency of methylene blue dye was studied as a function of dye concentration, temperature, contact time, and pH value. Two equilibrium models, the Langmuir and Freundlich models were employed, and the Langmuir model was found to be consistent with the experimental data. The highest removal efficiency was obtained at 60oC and was 5mg/gm. Furthermore, several kinetic models were used to gain insight into the adsorption mechanism. The pseudo-second-order model provided an accurate description of the adsorption process, while the Elovich equation suggested a chemical reaction between methylene blue dye and CNF. The study’s findings were in agreement with the pseudo-second-order model, indicating general chemical reactions. The study indicates that CNF adsorbents derived from renewable natural waste sources such as palm date leaves can be effective in removing cationic contaminants such as methylene blue dye.

In India, epilepsy is often viewed with superstition, considered a curse rather than a medical condition. Unfortunately, many affected individuals never receive proper medical attention from neurologists, leading them to seek out alternative remedies, including sorcery. Presently, the number of neurologists in India stands at approximately 3000, a concerning figure given the prevalence of epilepsy, which is reported to affect 5.59 to 10 individuals per 1000. This equates to over one million epilepsy patients across the country, representing more than 1% of the total population. Alarmingly, rural areas experience a higher incidence of epilepsy, around 2%, compared to urban centres, where the incidence is approximately 0.5%. This stark contrast underscores the urgent need for improved access to neurological care, particularly in underserved regions.The term "epilepsy" originates from the Greek verb meaning "to seize" or "to get hold of," forming the basis of its etymology. In certain societies, epilepsy is still interpreted as a "penalty for involvement in a forbidden ritual," although perceptions vary among different cultural groups. Individuals diagnosed with epilepsy (PWE) often exhibit behaviours that have led some to speculate about demonic possession or past-life transgressions as causative factors. Consequently, the term "epilepsy" carries diverse social connotations, leading to variations in treatment approaches based on differing perspectives of the condition. Regrettably, some negative attitudes towards epilepsy have fueled stigma, enduring disability, and significant adverse outcomes for those living with the condition.The majority of unreported cases turn to sorcery, exacerbating the already high mortality rates associated with epilepsy disorder and status epilepticus. Various treatment modalities exist for patients with epilepsy to manage their seizures. Given the debilitating and life-altering nature of epilepsy, India offers a range of options including medications (antiepileptic drugs or AEDs), devices, and surgical interventions. When an individual receives a diagnosis of epilepsy (defined as experiencing at least two unprovoked seizures within a short timeframe), life can be dramatically impacted. Several cases highlight the challenges patients face, leading to an increase in Disability Adjusted Life Years (DALY) overall. For newly born infants, constant vigilance from the mother is essential to monitor for any signs of seizure activity around the clock. When a pediatric patient is enrolled in school, their education is often profoundly disrupted. Should the patient be female, her existence would undergo a profound transformation, marked by societal perceptions deeming her as unfortunate and rendering the prospect of marriage untenable. Seizures in young adults precipitate job loss, thereby exacerbating societal burdens. Conclusion: There is a pressing need to raise awareness about epilepsy among the general populace of India. Dispelling misconceptions surrounding epilepsy is essential to steer individuals away from reliance on superstition, and instead, encourage them to seek guidance from certified specialists in nervous system disorders. Thankfully, by following the treatment regimen prescribed by a qualified neurologist, patients can significantly increase their chances of living a life free from seizures, thereby enhancing their overall quality of life and personal fulfilment.

Background: Although antiretroviral therapy (ART) effectively halt disease progression in HIV infections, complete eradiation of the virus remains elusive. Additionally, challenges such as long-term ART toxicity, drug resistance, and the demanding regimen of daily and lifelong ad-herence required by ART highlight the imperative need for alternative therapeutic and preventa-tive approaches. In recent years, broadly neutralizing antibodies (bNAbs) have emerged as promising candidates, offering potential for therapeutic, preventative and possibly curative in-terventions against HIV infection. Objective: This review aims to provide a comprehensive overview of the current state of knowledge regarding the passive immunization of bNAbs in HIV-1 infected individuals. Main findings: Recent findings from clinical trials have highlighted the potential of bNAbs in treatment, prevention, and in the quest of an HIV-1 cure. While monotherapy with a single bNAb is insufficient in maintaining viral suppression and preventing viral escape, ultimately leading to viral rebound, combination therapy with potent, non-overlapping epitope-targeting bNAbs have demonstrated prolonged viral suppression and delayed time to rebound by effec-tively restricting the emergence of escape mutations, albeit largely in individuals with bNAb-sensitive strains. Additionally, passive immunization of bNAb have provided ‘proof-of-concept’ for antibody-mediated prevention against HIV-1 acquisition, although com-plete prevention was not obtained. Therefore, further research on the use of bNAbs in HIV-1 treatment and prevention remains imperative.

The eutrophication of open water bodies, especially in coastal water area, has received intensive public focuses in recent years. Biological treatment of organic pollutants in industrial and domestic wastewater requires microbial flora to participate. The environmental impact of these microbes, particularly in regard to the spread of antibiotic resistance genes and pathogenicity in coastal water, remains largely unknown. We initiate studies to examine antibiotic resistance genes (ARGs) in microbial flora and study the mode of antibiotic spread in the coastal waters of Bohai Bay, North China by using high performance liquid chromatography-mass spectrum analysis and quantitative polymerase chain reaction. The metabolic features of bacteria related to the presence of ARGs in the coastal area showed the enrichment of Pseudomonadale species with triple resistance properties (ampicillin, kanamycin and gentamycin) at the estuary site locating adjacent to a coastal sewage treatment plant where both type I and type II polyketide synthase genes and b-lactam type antibiotics are detected. Pseudomonadale order is phylogenetically belonged to Proteobacteria Phylum, Gamma-proteobacteria Class and contains Pseudomonadaceae family and Pseudomonas genus. QPCR analysis suggests that the percent occupation of Pseudomonadale species to total Proteobacteria in the examined stations is close to several sampling stations close to sewage treatment plants, where consistent release of organic wastes occurred.

Chronic kidney disease (CKD) is characterized by a continuous decline in kidney function, often persisting for years or even a lifetime. This study presents a new exploration into the extraction and application of insect chitosan (Tenebrio molitor) targeting hemodialysis (HD). Initially, the potential of insect-derived chitosan as a sustainable and effective alternative to traditional sources (i.e. crustaceans) is demonstrated. Efficient extraction methods were developed (totaling between 6 h and 12 h), producing chitosan. Firstly, chitin was efficiently isolated from T. molitor through deproteinization and demineralization, with yields of approximately 5% (w/w). Subsequently, chitosan was obtained from the extracted chitin resulting in yields of between 65.0 ± 0.8% (w/w) and 79.3 ± 0.8% (w/w). Characterization using Fourier Transform Infrared Spectroscopy (FTIR) confirmed structural similarities with commercial chitosan and degrees of deacetylation in the 73 - 75% range. The bioactive properties of chitosan obtained from T. molitor, including antimicrobial and antioxidant activities, were evaluated. All the microorganisms tested were inhibited, exhibiting minimum lethal concentrations between 2 and 8 mg/mL, confirming the antimicrobial activity of the extracted chitosan. In addition, chitosan showed antioxidant activity in the range of 60 to 65 µmol Trolox equivalent/g, suggesting its viability for various medical applications.This study also developed a chitosan-based membrane (CH - M) culminating in a proof-of-concept phase for hemodialysis. The permeation characteristics of CH-M for urea and albumin were studied in vitro to assess their suitability as HD membranes. Urea was permeable to values of over 70% and albumin was retained.

Hazelnut, pistachio and cashew are tree nuts with health benefits but also with allergenic properties being prevalent food allergens in Europe. The allergic characteristics of these tree nuts after processing combining heat, pressure and enzymatic digestion were analyzed through in vitro (Western blot and ELISA) and in vivo test (Prick-Prick). In the analyzed population, the patients sensitized to Cor a 8 (nsLTP) were predominant over those sensitized against hazelnut seed storage proteins (Sprot, Cor a 9 and 14), which displayed higher IgE reactivity. The protease E5 effectively hydrolyzed proteins from hazelnut and pistachio, while E7 was efficient for cashew protein hydrolysis. When combined with pressured heating (autoclave and Controlled Instantaneous Depressurization (DIC)), these proteases notably reduced the allergenic reactivity. The combination of DIC treatment before enzymatic digestion resulted in the most effective methodology to drastically reduce or indeed eliminate the allergenic capacity of tree nuts.

This research aimed to synthesize Polyvinyl fluoride (PVDF) membranes and coat them with Tannic acid (TA) nanoparticles and Polyethylene glycol (PEG) additives so that the membrane's removal efficacy for humic acid (HA) pollutant from agricultural wastewater was investigated. Thus, six membranes with PEG:TA ratios of 0:0, 1:0, 0:1, 1:1, 4:1 and 1:4 were synthesized. Then the membranes' characteristics were identified by FT-IR ATR, FESEM, and AFM analysis, and HA's particle size and zeta potential were also investigated. Based on optimizing effective parameters, the operating pressure of 1.5 bar and HA concentration of 80 ppm were selected as optimal values. The membrane with PEG:TA=4:1, as the optimally modified membrane, had a pure water flux of 446.03 L/m2.h, effluent flux of 72.43 L/m2.h and pollutant removal rate of 86.62% at pH=7 After 60 min had passed. These values for the pristine membrane (PEG:TA=0:0) were 265.64 L/m2.h, 89.39 L/m2.h, and 75.59%, respectively. The results showed that although the effluent flux was lower in the optimized modified membrane than in the pristine membrane, HA removal percentage was increased.

Additive manufacturing (AM) or 3D printing of metals is gaining popularity due to its flexibility in fabricating parts with highly complex designs, as well as simplifying manufacturing steps and optimizing process times. In this investigation, 17-4 PH stainless steel was additively manufactured using Laser-Powder Bed Fusion (L-PBF), followed by functionalization through a DUPLEX treatment. This treatment involved a plasma-assisted nitriding process, followed by deposition of an arc-PVD c-Al0.7Cr0.3N hard coating. The microstructural modifications resulting from plasma nitriding (such as the formation of Fe2,3N and Fe4N, and the αN or expanded martensite phases), and the surface improvements with the c-Al0.7Cr0.3N coating on the 3D-printed 17-4 PH steel, are evaluated in comparison to conventionally manufactured 17-4 PH steel. These microstructural characteristics are correlated with the mechanical response of the treated surfaces. As a result of the plasma nitriding process, the hardness of the 3D-printed 17-4 PH SS increased by approximately 260%. The wear, measured through dynamic and static scratch-testing, was reduced by approximately 31%. This improvement was attributed to the modification of adhesive failure mechanisms, leading to a reduction in wear volume, improved coating adhesion, and enhanced scratch resistance.

Background: Several studies recently confirmed the emergence of resistance to antimalarial drugs in sub-Saharan Africa. Multiple first-line treatment (MFT) is one of the measures envisaged to respond to the emergence and spread of this resistance. The aim of this study was to identify perceived advantages and disadvantages of several MFT deployment strategies and to better understand potential implementation drivers and barriers. Methods: A qualitative survey was conducted in seven sub-Saharan countries amongst key opinion-leaders, national decision-makers, and end users. A total of 200 individual interviews were conducted and findings were analyzed following a thematic inductive approach. Results: From a policy perspective, the new MFT intervention would require endorsement at the global, national, and regional levels to ensure its inclusion in guidelines. Funding of the MFT intervention could be a bottleneck due to costs associated with additional training of healthcare workers, adaptation of drug delivery mechanisms, and higher costs of drugs. Concerning the MFT deployment strategies, a slight preference for the segmentation strategy was expressed over the rotation and geographic approaches, due to the perception that a segmentation approach is already in place at country level. Conclusions: The findings highlighted the need for a collective approach to MFT deployment through the engagement of stakeholders at all levels of malaria management.

Research indicates that painful experiences can significantly affect the fear of cancer recurrence among cancer survivors, which is a distressing concern that influences both physiological and psychological recovery. Yet, the role of potential factors and mechanisms in these relationships is not fully known. This cross-sectional study aimed to advance our comprehension of the associa-tions between total pain and the fear of recurrence in post-treatment cancer patients by examining two potential mediators: psychological flexibility and mentalization. Three hundred and thirty-five participants (aged 22 to 88, 49.1% female) who had finished their cancer treatment completed self-report assessments of total pain, fear of recurrence, psychological flexibility, and mentalization. The serial mediation analysis showed that all dimensions of total pain were positively related to the fear of recurrence indirectly through psychological flexibility and mentalization, in serial. Additionally, gender moderated these serial mediational effects. In line with the psychological flexibility model, personal capacities to face difficult internal/external problems and interpret one’s behaviour in motivational terms can counterbalance patients’ negative emotions and feelings related to the illness.

Pollutants accumulate in aquatic habitats as a result of mining activities. Lemna gibba and Lemna minor were used in this study to examine the accumulation capacities of Mo+, Pb+, and Cu++ in the acid fluids of the copper mining. Duckweed family includes water plants like L. minor and L. gibba. These are tiny, delicate, free-floating aquatic plants. Two reactors were assigned to L. gibba and L. minor, respectively. Throughout the course of eight days, these plants and reactor water were gathered every day. The acid mine water's pH, temperature, and electric conductivity were also tested every day. The L. gibba and L. minor were cleaned, dehydrated, and burned in a drying oven for a whole day at 300 oC. ICP-MS (Inductively Coupled Plasma Mass Spectroscopy) was used to determine the Mo+, Pb+, and Cu++ content of the plant and water samples. The concentrations of Mo, Pb, and Cu in the acid mine fluids of the copper mining were 30±4, 260±12, and 15535±322 μg L−1, respectively.in that order. When it came to extracting Mo, Pb, and Cu from the acidic fluids of the copper mining, L. gibba and L. minor performed well and efficiently compared to control samples; they did so 29 and 177 times for Mo, 30 and 109 times for Pb, and 495 and 1150 times for Cu. Considering all these findings, it has been shown that L. gibba and L. minor have the ability to efficiently remove Mo, Pb and Cu in acid mine fluids and can be good rehabilitation plants for polluted waters.

Static and functional occlusal relationships are the well-defined objectives of orthodontic therapy. To accomplish it, the jaws must be positioned in centric relation (CR)/ Central occlusion (CO) and appropriately proportioned in three space planes. Orthodontists have well-established techniques when analyzing the skeletal connection between the maxilla and mandible in both sagittal and vertical planes. Although there exist multiple analyses for the skeletal transverse dimension (STD), their inclusion in conventional orthodontic diagnosis is not widely acknowledged. Transverse tooth compensations have been visually represented in prosthodontic literature using a crosshatch arch that passes through the buccal and palatal cusps of maxillary molars, known as the Wilson curve. An inflated Wilson curve has long been seen as a prosthetic maxim, increasing the possibility of working and non-working side interferences. Research has indicated a connection between higher masticatory muscle activity and posterior occlusal contacts or interferences. When skeletal transverse issues are concealed by dental expansion, there is an elevated susceptibility to gingival recession in orthodontic patients who have a small Maxilla or constricted upper jaw. The temporomandibular joints, muscles, periodontal tissue, and airway might all suffer in a susceptible patient with a transverse insufficiency brought on by a narrow maxilla. As for orthodontists, the objective is to create skeletal connections and functional occlusion that are as near ideal as feasible. This will reduce the likelihood of occlusion-related inconsistencies exacerbating the negative consequences on the dentition, periodontium, or joints. An accurate skeletal and dental diagnostic in all three space planes is required. Our goal is to explain all approaches to enable readers to use a transverse skeletal diagnostic in their practice regardless of the technological level at their disposal. The initial step is to ascertain the kind and presence of deficiencies in the maxilla. Since fewer soft tissue alterations are caused by maxilla hypoplasia in the transverse direction, skeletal transverse dimension (STD) assessment is a more significant challenge than vertical or sagittal discrepancy assessment. Model analysis, clinical assessments, radiographic measurements, and occlusograms have all proven successful in producing accurate assessments. Most of the time, surgically assisted maxillary expansion (SARME) is reported to have higher stability than orthopedic maxillary expansion (OME). We examine and discourse on possible research opportunities using the Collaborative Cross (CC) mouse model as a substitute research model.

The purpose of this study was to 1) examine the impact of various types of heat processing used by consumers (water bath cooking WBC, oven convection roasting OCR, grilling G, pan frying PF) on the selenium content and its retention in goose breast meat (with and without skin); 2) Estimation of coverage of this element's daily requirement in adults after consuming 100 g of goose breast meat. The material used in the study comprised 36 breast muscles cut from carcasses of 17-week-old White Koluda geese. The moisture, ash, and selenium were determined in both raw and thermally processed muscles. It has been concluded that various methods of heat processing significantly impact cooking loss, moisture, ash and selenium content of meat. The heat processing increased the selenium content of the muscle regardless of the presence of skin, which affects the possibility of covering adults' Nutrient Reference Values-Requirements (NRV-R) for this element in the range of 33.3-44.8%. Goose breast meat can be a valuable component of a diversified diet. It provides many nutrients. It is also a safe source of selenium. It is unlikely that adult consumers, even those who eat goose regularly, will exceed this element's upper tolerable intake level.

The adsorption of actinide ions (Am(III) and U(VI)) from aqueous solutions by pristine and oxidized carbon fabrics has been investigated by means of batch experiments at different pH values (4, 7 and 9) and temperatures (25, 35 and 45 °C) under ambient atmospheric conditions. The experimental results indicate that both pH and fabric texture affect the adsorption rate and the relative removal efficiency, which results at 70% and 100% for Am(III) and U(VI), respectively. The Kd (L/kg) values for U(VI) have been generally found to be higher (2 &lt; log10(Kd)&lt; 3) than the corresponding values for the Am(III) adsorption (1.5 &lt; log10(Kd) &lt; 2). The data obtained from the experiments regarding the temperature effect imply that the relative adsorption for both actinides increases with temperature and that the adsorption is an endothermic and entropy-driven reaction. Application of the fabrics to remove the two actinides from contaminated seawater samples shows that both the relative removal efficiency and the Kd values decrease significantly due to the presence of competitive cations (e.g., Ca2+ and Fe3+) and complexing anions (CO32-) in the respective waters. Nevertheless, the removal efficiency is still remarkable (50% and 90% for Am(III) and U(VI), respectively), demonstrating that these materials could be attractive candidates for the treatment of radionuclide/actinide contaminated waters.

The aim of this study was to investigate the effect of laser irradiation to computer-aided de-sign/computer-aided fabrication (CAD/CAM) resin blocks coated with a silane coupling agent on the bond strength between the resin blocks and composite resin. The CAD/CAM resin blocks used in this study were Cerasmart 300 (GC) and Vita Enamic (Vita); they were cut into plates and then subjected to a series of treatments. After processing with a silane coupling agent, treatment with a semiconductor laser was performed at 3.0, 5.0, and 7.0 W, followed by the bonding procedures. The control group included those exposed to silane and bonded without laser application. After bonding, a mold with a simulated cavity was formed on the specimen and filled with flowable composite resin, and they were stored for 24 h or stressed by thermal cycling for subsequent testing that assessed the shear bond strength (n = 10). The results revealed that the bond strength was significantly enhanced by laser irradiation after applying a silane coupling agent, whereas significant effect was not detected between the materials. Particularly, 7 W laser irradiation had a significant effect on the bond strength between the composite resin and Cerasmart block after thermal cycling.

Colorectal liver metastases (CRLM) patients combined with hepatic lymph node metastases was a negative prognostic factor associated with outcomes. Up to now, there was still lack of a reliable method to identify the status of hepatic lymph nodes. The aim of this study was to investigate the predictive ability of mono-exponential, bi-exponential, and stretched-exponential diffusion-weighted imaging (DWI) models to distinguish between benign and malignant hepatic lymph nodes in CRLM patients who underwent neoadjuvant chemotherapy prior to surgery. In total, 97 CRLM patients with pathologically proved hepatic lymph node status were included. Various quantitative parameters, including the apparent diffusion coefficient (ADC) from mono-exponential model, D, D*, and f derived from intravoxel incoherent motion (IVIM) model, as well as DDC and α from stretched-exponential model (SEM), were measured. Multivariate analysis revealed that the pre- treatment DDC value and the short diameter of the largest lymph node after treatment were independent predictors of metastatic hepatic lymph nodes. A nomogram combining these two factors demonstrated excellent performance in distinguishing between benign and malignant lymph nodes in CRLM patients, with an area under the curve (AUC) of 0.873. Therefore, the nomogram can serve as a preoperative assessment tool for determining the status of hepatic lymph nodes and aiding in the decision-making process for surgical treatment in CRLM patients.

Background: Abdominal migraine (AM) is a clinical diagnosis specified by Rome IV and ICHD III as a functional gastrointestinal disease (FGID) and a migraine associated syndrome, respectively. AM is undiagnosed and undertreated, and thus far the FDA has not approved any drug for AM treatment. We and others showed that changes in the kynurenine (KYN) pathway of tryptophan (TRP) metabolism played an important role in the pathogenesis and treatment of FIGDs. Changes in the KYN pathway were shown in migraine. Findings: Abdominal migraine reflects impairments in communication within the gut-brain axis. Treatment approaches have not been sufficiently documented and are based on experience of physicians, presenting personal rather than evidence-based practice and including efficacy of some drugs used in adult migraine. Non-pharmacological treatment of AM is aimed preventing or ameliorating AM triggers. Modulations within the KYN pathway of TRP metabolism induced by changes in TRP content in the diet, may ameliorate FGIDs and support their pharmacological treatment. Pharmacological manipulations of brain KYNs in animals have brought promising results for clinical applications. Conclusions: In conclusion, controlled placebo-based clinical trials with dietary manipulation to adjust the amount of the product of the KYN pathway of TRP metabolism are justified in children and adolescents with AM. Further preclinical studies are needed to establish details of these trials.

The emergence of new SARSCoV-2 variants can affect vaccine efficacy, laboratory diagnosis and therapies already available, triggering interest in the search for antiviral agents for SARSCoV-2 infections. Ribavirin (RBV) is a broad-spectrum antiviral with demonstrated in vitro activity against multiple viruses, including SARSCoV-2. Methods. This retrospective study evaluated the dynamic and viral clearance of SARSCoV-2 in hospitalized adult participants (PTs) with COVID-19 pneumonia who received RBV aerosol within a compassionate use study. Was also assessed the impact of RBV on the clinical outcome and the mutational profile of SARSCoV-2. Results. The median RNA values measured in nine PTs included in the study de-creased from baseline to discharge (at BL, threshold cycle (Ct)=22.4, IQR 19.84-5.07; at discharge, Ct=27.92, IQR 26.43-36.11). Seven/9 PTs experienced a clinical improvement, while two PTs deceased during hos-pitalization. In PTs with a favorable outcome the virus clearance rate at discharge was 28.6%. The cumulative clearance rate was 71.4% within day 14th from discharge. A mutational pattern after RBV was detected in 3/5 PTs in whom was available whole genome sequencing. Conclusions. RBV may limit SARSCOV-2 replication resulting in a favorable clinical outcome. Ribavirin may also contribute to the mutational spectrum of SARSCoV-2.

Meningiomas are cerebral cancers that arise from abnormal cell development in the meninges and defensive layers covering the mind and spinal line. They can attack areas close to the cerebrum tissue and apply tension to neighboring designs, prompting different neurological side effects. Recent advances in atomic science and genomics have revealed insights into the fundamental subatomic adjustments and flagging pathways involved in the improvement of meningoma. Cabozantinib, a chemotherapeutic agent, has shown promising results in preclinical and clinical studies in various malignancies, including meningia. It inhibits angiogenesis, reduces cancer development, and prompts cell passage, providing areas of strength for clinical examination. Inhibition of VEGFR2 signaling has shown promise results in clinical trials in various cancer types, including a variety of cancers. This review summarizes the current knowledge on the pathophysiology and potential therapeutic effects of cabozanteb as a therapeutic agent for intracranial meninga.

Ketogenic dietary therapies (KDTs) are an effective and safe non-pharmacological treatment for drug-resistant epilepsy, but adherence can be challenging for both patients and caregivers. In Europe, there are no adequate tools to measure it other than monitoring ketosis. This study aimed to adapt and validate the Brazilian adherence questionnaire, Keto-check, into the Italian version: iKetoCheck. Using the Delphi technique, 12 judges validated the contents through agreement rate and the Content Validity Index (CVI). The iKetocheck was self-completed electronically by drug-resistant epilepsy or GLUT1 deficiency patients within an interval of 15 days to measure its reproducibility. Test-retest reliability was evaluated using Pearson correlation and relative significance test. Exploratory and confirmatory factorial analyses were made using Factor software. The final tool, iKetoCheck, consists of 10 questions with 5-point Likert scale answers. It evaluates various aspects such as informing caregivers about the diet, organization of meals, measurement of ketosis, weighing food consumed, diet negligence, use of carbohydrate-free medications, attending follow-up visits, reading food labels, consulting an expert for dietary concerns, and cooking at home. The factorial analysis resulted in three factors: "attention," "organization," and "precision," with satisfactory results for indices in exploratory and confirmatory analyses. Although higher mean values of ketonemia measurement were observed in patients with a higher adherence score, these values were not statistically significant (p=0.284). In conclusion, iKetoCheck is a valid tool for evaluating KDTs' adherence in Italian drug-resistant epilepsy or GLUT1 deficiency patients. It can provide valuable information to improve patient management and optimize the effectiveness of KDTs.

Starch is widely applied in various industrial sectors, including the food industry. Starch is used as a thickener, stabilizer, or emulsifier. However, arrowroot starch generally has weaknesses, such as unstable under heating and acidic conditions, which are generally applied to processing in the food industry. Modifications were applied to improve the characteristics of native arrowroot starch. In this study, arrowroot starch was modified by heat-moisture treatment (HMT), octenylsuccinylation (OSA), and dual modification between OSA and HMT in a different sequence, namely HMT followed by OSA, and OSA followed by HMT. This study aims to determine the effect of different modification methods on the physicochemical and functional properties of native arrowroot starch. The result shows that both single HMT and dual modification caused damage to native starch granules, such as the formation of cracks and roughness. Especially for single OSA treatment, there is no significant change in granule morphology after modification. All modification treatments did not change the crystalline type of starch but reduced the RC of native starch. Both single HMT and dual modifications (HMT-OSA, OSA-HMT) increased pasting temperature and setback, conversely decreasing the peak and breakdown viscosity of native starch. Whereas, single OSA has the opposite trend compared with the other modifications. HMT played a greater role in increasing the thermal stability and retrogradation ability of arrowroot starch. Both single modifications (HMT and OSA) increase the hardness and gumminess of native starch, conversely for dual modifications. HMT has a greater effect on color characteristics, where decreased the lightness and whiteness index of native arrowroot starch. Single OSA modification increased swelling volume higher than dual modification. Both single HMT and dual modifications increase water absorption capacity and decrease the oil absorption capacity of native arrowroot starch.

In interceptive treatments in which impacted teeth (incisor or first permanent molar) should be included into the dental arch, the main clinical problem is the provision of an anchorage area and a suitable appliance. The use of laser sintered metal orthodontic grids, designed and printed digitally, has expanded the boundaries of orthodontic treatment, especially in its interceptive phase. Our aim is to describe a digital model for providing anchorage during orthodontic-surgical traction of impacted teeth in the mixed dentition period. We present the treatment of three clinical cases with digitally projected and printed metal grids used for anchorage. In the described clinical cases, individually designed anchorage systems were used. They were created through design software and after that the metal grids were printed. The devices are placed in the oral area and don’t disturb the aesthetics of the patient in any way. The advantages of individual designed metal support grids allow to accommodate the features of relief of the hard palate and alveolar bone. This makes the grids comfortable for the patient and rigid enough to perform orthodontic tractions at the same time. The printed additional grids are applicable in mixed dentition and in complicated clinical cases in permanent dentition. Their individuality allows segmental treatments or treatments in cases requiring additional anchorage further from the active force.

(1) Background: Metastasis is a complex process in which the primary cancer cells spread to a distant organ or organs, creating a secondary tumour location, which in many patients leads to treatment failure and death. The aim of the present study was to assess the association of endothelial markers (i.e., sP-selectin, sE-selectin and von Willebrand factor) with the leptin-to-adiponectin ratio (LAR) and to perform an analysis of the predictive value on the survival of patients with luminal A and B invasive breast cancer (IBrC). (2) Methods: The trial included 70 previously untreated women with a median age of 54.5 years and a median tumour size of 1.5 cm. The concentrations of pre- and post-treatment endothelial markers, leptin, and adiponectin were evaluated with specific ELISA kits. The median duration of follow-up was 68.5 months (interquartile range (IQR) = 59–72 months) with a recurrence rate of 15.71%. (3) Results: Regardless of the treatment pattern, endothelial marker concentrations and the LAR increased after treatment. The follow-up showed a significantly higher relapse rate in patients with IBrC who had higher pre-treatment sP-selectin and post-treatment LAR levels. A post-treatment LAR of 0.83 ng/mL with a sensitivity of 88.9% and specificity of 57.9% was established as the optimal cut-off value for distinguishing patients with or without disease recurrence. Additionally, a higher risk of breast cancer relapse was associated with a lower post-treatment sP-selectin concentration. (4) Conclusions: Our results showed mainly that pre-treatment sP-selectin levels and post-treatment LAR may have a value as prognostic indicators and may contribute to predicting the future outcome in patients with early-stage IBrC.

This review focus on a critical analysis of nanocatalysts for Advanced Reductive Processes (ARP) and Oxidation Processes (AOP) designed for the degradation of poly/perfluoroalkyl substances (PFAS) in water. Ozone, ultraviolet and photocatalyzed ARP and/or AOP will be the basic treatment technologies. Besides the review of the nanomaterials with greater potential as catalyst for advanced processes of PFAS in water, the perspectives for its future development considering sustainability considerations will be discussed. Moreover, a brief analysis of the current state of the art of the ARP and AOP for the treatment of PFAS in water will be presented.

INTRODUCTION There have been several advances in the treatment of hepatitis C virus (HCV) infection which have resulted in major reductions in the morbidity and mortality from liver-associated disease. These are not widely available in the Caribbean, due in part, to lack of knowledge of the epidemiology of infections with HCV. As efforts are made to eliminate HCV from the region, these and other existing barriers such as lack of an established database on HCV must be addressed. This review seeks to identify gaps in the knowledge of HCV in the Caribbean with respect to seroprevalence, genotype distribution and general epidemiologic characteristics. MATERIALS AND METHODS The literature for the period January 1, 2005, to October 2022, was reviewed to gather country specific data on HCV across the Caribbean. References were identified through indexed journals accessed through established databases. The usage pattern of HCV drugs was determined from data obtained from Pharmacists and Infectious Diseases Specialists across the region. RESULTS The prevalence of HCV in the Caribbean was 1.5%; the region should therefore be considered an area of moderate prevalence. Notably, data from specific countries were limited. The prevalence of HCV among intravenous drug users (21.9-58.8%); persons living with HIV/AIDS (0.8 to 58.5%); prisoners (32.8-64%) and men who have sex with men (MSM) (0.8-6.9%) was generally higher than in the general population (0.8-2.3%). Genotype 1 (83% was most prevalent followed by genotypes 2 (7.2%) and 3(2.1%), respectively. Drugs currently being used for treatment of HCV infections across the Caribbean include Epclusa (Sofosbuvir/velpatasvir), and Harvoni (Ledipasvir/sofosbuvir). Some of these drugs, are only available in the private sector and are sourced externally whenever needed. CONCLUSION There is a paucity of current data on the seroprevalence of HCV in the Caribbean and well-designed prospective studies are indicated to drive the implementation of treatment and control programs for HCV in the region. Barriers which need to be first overcome include unavailability and high cost of drugs used to treat HCV infections, injecting drug use and limited access to medical care and laboratory testing.

The microstructure evolution, superplasticity, and room temperature mechanical properties of Ti-4%Al-1%V-3%Mo alloys modified with 0.01-2 wt.% boron were investigated. Increasing the boron content from 0 to 0.1 wt.% effectively refined prior β-grains, reducing a mean grain size from ~700 µm to ~210 µm. Whiskers of the TiB phase with a size in a range of 0.7-2.9 µm were observed after solidification and thermomechanical processing. Alloys with 0.01-0.1 wt.% boron exhibited similar superplastic elongations and strain rate sensitivity coefficient m of 0.4-0.5 at a strain rate of 1×10-3 s-1 and the elongation to failure decreased from 1000% at 875°С to 400-500% at 700°С. Along with this, the minor boron addition effectively decreased flow stress values, especially at 775 °C, that was explained by the acceleration of the recrystallization and globularization of the microstructure at the initial stage of deformation. Recrystallization-induced decrease in yield strength from 770 MPa to 680 MPa was observed with an increase in boron content from 0 to 0.1 wt.%. Heat treatment increased post-forming strength characteristics for the alloys with 0.01-0.1 wt.% boron by 90–140 MPa without ductility reduction. Alloys with 1-2 wt.% B demonstrated the opposite behavior. The grain refinement effect was not revealed, and prior β grain sizes were ~670-750 µm after solidification. Thermomechanical processing promoted the fragmentation of boride whiskers and the formation of near-spherical particles with a size of ~1 μm for the alloy with a eutectic concentration of 2 wt.% B. A high fraction of borides, ~5-11%, in the alloys with 1-2 wt.% B deteriorated the superplastic properties and drastically decreased ductility at room temperature. The alloy with 2 wt.% B demonstrated non-superplastic behavior and a low level of mechanical properties, meanwhile, the alloy with 1% boron exhibited high-temperature superplasticity at 875 °C with elongation of ~500%, and yield strength of 830 MPa, ultimate tensile strength of 1020 MPa at a room temperature after 100% of superplastic deformation.

Rice varieties such as Mahsuri Mutan and Basmati 370 are categorized as specialty rice with kernel elongation ratio exceeding 1.6 and 2.0, respectively. Ageing treatment in rice could affect the physical and chemical properties of rice such as grain size and shape, quality and taste of the cooked rice. The main objective of this study was to determine the effects of ageing treatment on the physicochemical properties of Mahsuri Mutan, Basmati 370 and MR219 rice varieties. The three rice varieties were subjected to heat treatment at 90ºC using the oven for 3 hours. After the heat treatment, the samples were cooled at room temperature (25ºC) for 1 hour. Physicochemical properties such as alkali digestion value, water uptake ratio (WUR), solids in cooking water (SCW), high kernel elongation (HKE) ratio and amylose contents were determined. Data collected on physicochemical traits and ageing vs non-ageing treatments were subjected to analysis of variance (ANOVA) using SAS software version 9.4. Phenotypic correlation coefficient indicated that there was a high positive correlation between HKE and water uptake ratio. The ageing treatment also showed significant difference in all the physicochemical traits of the varieties studied. Observation under electron microscope showed that the ageing samples had more cracks on the tissue structure compared to normal rice samples. The hexagon structure in Mahsuri Mutan gave more elongation effect on its kernel. The findings from this study could be useful to breeders in selection and development of new high kernel elongation rice variety.

Melasma is a challenging chronic skin condition associated with hyperpigmentation and un-known etiology. This scoping review mapped evidence of available treatments and their effectiveness in darker skin types. A comprehensive, systematic online search was conducted in Scopus, PubMed, CINAHL Complete, Cochrane, ScienceDirect, and Web of Science Core Collection. All eligible titles were exported to an Endnote20 library. Thematic content analysis was performed to summarise data on current melasma treatments for darker skin types. The quality of included articles was appraised using the Mixed Methods Appraisal Tool (MMAT) 2018 version. A total of 2863 articles were retrieved from the databases, and 10 met the eligibility criteria following abstract and full-text screening. Our findings demonstrate that topical treatments, chemical peels, lasers, and tranexamic acid are common treatment modalities used in darker skin types. Although these treatments may be effective in the short term, they bring about un-desirable side effects and sometimes worsen or result in reoccurrences of melasma. Based on the evidence mapped, current treatment modalities are not suitable for darker skin types. There are very few studies conducted on individuals of African descent. Further research is necessary to investigate treatment interventions which may be user-friendly when dealing with darker skin types.

The endometrium is an important part of the uterus. The human endometrium is a complex and dynamic tissue that goes through phases of growth and regression during any menstrual cycle. A thin endometrium might be relevant to a lower rate of implantation as well as a higher rate of miscarriage. Several treatments have been developed for thin endometrium, such as granulocyte colony-stimulating factor, stem cell therapy, acupuncture and physical therapy, among others. These approaches have been shown to have effects on the endometrium related to reducing the area of fibrosis, increasing the number of glands, promoting angiogenesis, increasing endometrial thickness, improving tissue structure, and increasing pregnancy rates. This review summarizes the key role of these treatments in repairing thin endometrium and improving clinical pregnancy rates

Despite of over 20 years of community directed treatment with ivermectin (CDTI), a high prevalence of onchocerciasis and onchocerciasis-associated epilepsy were observed in rural villages in Mahenge, Tanzania. Therefore, we assessed the knowledge, attitude and practice about onchocerciasis in four rural villages in the Mahenge area. This was a qualitative study conducted between June and July 2019. Eleven focus group discussions were organized with persons with epilepsy and their caretakers, community resource persons, and community drug distributors (CDDs), and two in-depth interviews with district programme coordinators of neglected tropical diseases (NTD). Most participants were aware about symptoms of onchocerciasis using local terminologies such as “ukurutu/rough dry skin” and “kuwashwa/itching”. A small proportion of people did not take ivermectin during CDTI for fear of adverse reactions such as itching and swelling. Some men believed that ivermectin may decrease libido. Challenges for high CDTI coverage included, long walking distance by CDDs to deliver drugs to households, persons being away for farming, low awareness of the disease and limited supervision by the NTD coordinators. In conclusion, ivermectin uptake in Mahenge should be optimised by continuous advocacy about the importance of taking ivermectin to prevent onchocerciasis-associated morbidity and by improving supervision during CDTI.

Developing countries are confronted with general issues of municipal wastewater management and treatment. Untreated faecal sludges and wastewaters from septic tanks and traditional toilet are rejected into rivers and sometimes using for urban agriculture without any treatment to reduce the biorisk. Consequently, there are potential environmental and public health risks. In this study, a wastewater treatment plant prototype coupled with Moringa Oleifera seeds treatment was developed to evaluate their effectiveness for the reduction of faecal indicator bacteria and antibiotics resistant bacteria in domestic wastewater. Results indicate that our performed prototype system presents high capacity to reduce bacteria with abatements up to 99.34%. High reductions of bacteria load were obtained after add of Moringa Oleifera seeds into waters, with reductions varied from 36.6-78.8% for E. coli, 28.3-84.6% for Faecal coliform, 35.3-95.6% for Vibrio cholerae and 32.1-92.4% for total flora. Same effects of Moringa Oleifera seeds were noted for reducing antibiotic resistant bacteria, Extended Spectrum Beta-lactamases and Carbapenem-Resistant Enterobacteriaceae with abatements up to 98% for E. coli and faecal coliform, 100% for Vibrio cholerae and 91.96% for total flora. Our results supported high capacity of Moringa Oleifera seeds as an excellent alternative for pathogens and antibiotics resistant bacteria reduction/purification from domestic wastewater

A major challenge in the clinical management of patients with mesial temporal lobe epilepsy (MTLE) is identifying those who do not respond to antiseizure medication (ASM), allowing for the timely pursuit of alternative treatments, such as epilepsy surgery. Here, we investigated changes in plasma metabolites as biomarkers of pharmacoresistance in patients with MTLE. Furthermore, we used the metabolomics data to gain insights into the mechanisms underlying MTLE and response to ASM. We performed an untargeted metabolomic method using magnetic resonance spectroscopy and multi- and univariate statistical analyses to compare data obtained from plasma samples of 28 patients with MTLE compared to 28 controls. The patients were further divided according to response to ASM: 20 patients were refractory to treatment, and eight were responsive to ASM. We only included patients using carbamazepine in combination with clobazam. We compared the group of patients with controls and found that the profiles of glucose (p = 0.01), saturated lipids (p = 0.0002), isoleucine (p = 0.0001), β-hydroxybutyrate (p = 0.0003), and proline (p = 0.02) were different in patients compared to controls (p &lt; 0.05). In addition, lipoproteins (p = 0.05), lactate (p = 0.05), glucose (p = 0.05), unsaturated lipids (p = 0.05), isoleucine (p = 0.05), and proline (p = 0.05), could discriminate between the two groups of patients classified according to response to ASM. The identified metabolites were linked to different biological pathways related to cell energy metabolism, and pathways linked to inflammatory processes and the modulation of neurotransmitter release and activity in MTLE. In contrast, we found that pyruvate metabolism may be linked to resistance to ASM. In conclusion, in addition to insights into the mechanisms underlying MTLE and the response to treatment with ASM, our results suggest that plasma metabolites may be used as biomarkers of disease and response to ASM in patients with MTLE. These findings warrant further studies exploring the clinical use of metabolites to assist in decision-making when treating patients with MTLE.

The orthodontic treatment brings numerous benefits and, in most cases, the benefits outweigh the possible disadvantages. Root resorption (RR) is a common adverse phenomenon associated with orthodontic treatment. This study evaluates the role of low-level laser emission / Photobiomodu-lation (LE/P) in quantitative measurements of root resorption (QRR). The application of LE/P was done after each orthodontic activation with 4 types of treatment intervention (TI) on the RR after fixed orthodontic treatment (FOT) of the upper arch with ectopic eye tooth/teeth [EET]. 32 Orthodontic patients scheduled for FOT were selected and assigned to the 4 groups. These were LE/P+Self ligating bracket (SLB), LE/P+Conventional bracket (CB), Non-Photobiomodulation (non-LE/P)+SLB, and non-LE/P+CB. Standard management stages of FOT were followed in the maxilla. Each patient received a single application of LE/P labially/buccally and palatally, a total of 5 different points during each activation or appointment. The main outcome measure was QRR in maxillary anteriors before and after FOT assessed via cone-beam computed tomography (CBCT) using 3D OnDemand software. Insignificant QRR was found between before and after FOT in SLB, CLB, and LE/P, non-LE/P groups (p > 0.05). QRR in the SLB vs CB and LE/P vs non-LE/P group was significantly different in 11, 13, and 23 (p < 0.05). QRR in the LE/P+SLB group (p < 0.05) was significantly different in 11, 13, and 23 than that in the other groups. The most severe QRR was found on the 13 (0.88 ± 0.28mm and 0.87±0.27mm) and 23 (1.19 ± 0.14 mm and 1.16±0.13mm) in the CB and non-LE/P group (p < 0.001). LE/P+SLB showed highly significant superior outcome (p < 0.001) in relation to non-LE/P+CB, the QRR of 23 were 0.813± 0.114mm and 1.156± 0.166mm respectively. Significantly higher amount of QRR found in EET patients after FOT treated with the CB, non-LE/P, and non-LE/P+CB system and warrants further investigation to explore potential specific causes.

Aim of this research paper is to introduce a novel method of hybrid orthodontic tooth-borne distalizer treatment of class II malocclusion by using 3D printed biocompatible personalized distalizer. Explains 3D designing, printing and clinical application of individualized biocompatible medical device dedicated for orthodontic teeth distalization. Compares such distalizer manufactured from two different biocompatible photopolymers (white and transparent). Evaluates their clinical performance and also patients’ aesthetical perception. Clinical part includes comparison of treatment debonding on the set of 12 complete orthodontic treatments with uni-lateral class II malocclusion managed with hybrid approach (CAT-Invisalign with 3D printed distalizer). Paper offers an evaluation of the personalized distalizer functioning in regard to current publications and comparison to conventional prefabricated alternatives like Carriere® Distalizer™ appliance. Results showed no significance of material differences on clinical performance of such individualized distalizers. Research showed preference of patients towards transparent biocompatible photopolymer instead of white A2 shade.

Complete pathologic response (pCR) predicts the long-term outcome of neoadjuvant treated (NAC) breast cancer (BC) but is reached in <10% of hormone-receptor-positive patients. Biomarkers able to guide adjustment or interruption of an ineffective therapy are desired. Here, we evaluated whether shifts in the serum concentration of thymidine kinase 1 (sTK1) during NAC could be utilized as a biomarker. In the PROMIX trial, women with localized HER2- BC received neoadjuvant epirubicin/docetaxel in six cycles. sTK1 was measured with an ELISA in 54 patients at cycles 1-4 and in a total of 131 patients before and 48h after cycle 1. The prognostic significance of the results was evaluated by log-rank tests of Kaplan–Meier estimates. Treatment resulted in a 2-fold increase of sTK1 before and 3-fold increase 48h after the cycles, except for the first cycle, where half of patients reacted with a decrease (post/pre sTK1- ratio <1.12) and the other half reacted with an increase (ratio >1.12). OS rates in ER+ patients with ratios of >1.12 and <1.12 were 97.7% and 78% (p=0.005), respectively, and DFS rates were 90.7% and 68% (p=0.006), respectively. Thus, response of sTK1 at the first cycle of chemotherapy could be used both as an early biomarker for guidance of chemotherapy and for the study of inherent tumor chemo-sensitivity, which could predict long-term outcome prior to therapy.

The effect of Zr addition on the melting temperature of the CoCrFeMnNi High Entropy Alloy (HEA), known as the “Cantor’s Alloy”, is investigated, together with its microstructure, mechan-ical properties and thermo-mechanical recrystallization process. The base and Zr-modified al-loys are obtained by vacuum induction melting of mechanically pre-alloyed powders followed by recrystallization. The alloys were characterized by X-ray diffraction, scanning and transmis-sion electron microscopy, thermal analyses, mechanical spectroscopy and indentation measures. The main advantages of Zr addition are: 1) a fast vacuum induction melting (VIM) process; 2) the lower melting temperature, due to Zr eutectics formation with all the Cantor’s alloy elements; 3) the good chemical alloy homogeneity; 4) the mechanical properties improvement of recrystallized grains with a coherent structure. The crystallographic lattice of both alloys resulted to be FCC. Results demonstrate that the Zr-modified HEA presents a higher recrystallization temperature and smaller grain size after recrystallization with respect to the Cantor’s alloy, with precipita-tion of a coherent second phase which enhance the alloy hardness and strength, while maintaining a good tensile ductility.

The use of Information Communication Technologies (ICT) in education brings up new possibilities of promoting the learning and health experiences. In this sense, education contexts of 21st century must consider these two areas of knowledge, especially their integration. This article presents learning practices developed with mobile devices and games, in order to improve learning and well-being in children and adolescents undergoing cancer treatment in non-formal educational setting. The methodology is based on qualitative case studies with content-based data analysis, involving informal interviews and observation methods. The study considers data from 5 patients who participated in the research between 2015 and 2019. The results demonstrate a positive influence of the practices with mobile technologies and games in terms of learning and in the well-being feeling of patients during the treatment.

Ti6Al4V samples obtained by selective laser melting were subjected to acid treatment, chemical oxidation in hydrogen peroxide solution and subsequent thermochemical treatment. The effect of temperature and time of acid etching of Ti6Al4V samples on surface roughness, morphology, topography and chemical and phase composition after the thermochemical treatment was studied. The surfaces were characterized using scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray diffraction and contact profilometry. Pore and protrusion sizes were measured. Acid etching modified the elemental composition and surface roughness of the alloy. Temperature had a greater influence on the morphology, topography and surface roughness of samples than time. Increases in roughness values were observed when applying successive chemical oxidation and thermochemical treatment compared to the values observed on surfaces with acid etching. After the thermochemical treatment, the samples with acid etching at a temperature of 80 °C showed a multiscale topography. In addition, a network-shaped structure was obtained on all surfaces, both on their protrusions and pores previously formed during the acid etching.

This paper presents multidisciplinary and innovative research concerning fighting against coronavirus through wastewater collection and treatment. Studies suggest that coronavirus exists in the wastewaters. Untreated wastewater is proved to spread the virus. Coronavirus is attacking people globally and shrinking the economy. This paper highlights the idea that the coronavirus shall be defeated with the help of wastewater collection and treatment as well. The question addressed by this paper is will communities defeat the coronavirus without well-collected and treated wastewaters? This research aims to display the role of wastewaters in the spread of coronavirus in cities and to require their collection. The methods to achieve the goals are theoretical surveys, case study strategy, mathematical modeling, statistical procedures, forecasting of future, and dialectical discussions. The findings of this research demonstrate the need for carefully collected and treated wastewaters to overcome the coronavirus. This paper gives suitable techniques to collect and treat wastewater such as wastewater stabilization ponds, bacterial reactors, and anaerobic ponds. The innovative idea of this paper, its suggested indicators to select a certain wastewater treatment technique in every city, and its outcome will assist the global community to fight the coronavirus more effectively.

Autoimmune hemolytic anemia is a rare condition characterized by destruction of red blood cells with and without involvement of complement. It is associated with significant morbidity and mortality. In warm autoimmune hemolytic anemia less than 50% of patients remain in a long-term remission following initial steroid therapy and subsequent therapies are required. Cold agglutinin disease is a clonal hematologic disorder which requires therapy in majority of patients and responds poorly to steroids and alkylators. Rituximab has a favorable toxicity profile and has demonstrated efficacy in autoimmune hemolytic anemia in first line as well as relapsed setting. Rituximab is the preferred therapy for steroid refractory wAIHA and as part of the first- and second-line treatment of cold agglutinin disease. This article reviews the mechanism of action of the rituximab and current literature its role in management of primary and secondary warm autoimmune hemolytic anemia and cold agglutinin disease.

Human infection caused by the SARS-CoV-2 virus, called COVID-19, is a new pandemic with devastating effects worldwide. Science seeks the rational and systematic explanation of phenomena. In pandemics, decisions on prevention and treatment of people should be consistently taken, supported by scientific knowledge and ethical principles to produce more good than harm. At first, prospective observational studies to systematically collect patient data, correlating protective or therapeutic interventions with outcomes to assess effectiveness and safety, should be prioritized as the most appropriate type of study. The proposed protocol in this article aims to provide doctors with information on the reduction of harm in early COVID-19 patients by applying individualized interventionist or expectant therapeutic strategies, respecting the autonomy and preferences of physicians and patients in clinical decision-making. The evaluation of the clinical status, besides laboratory confirmation of COVID-19, comprises an individualized symptom score for each patient, a global self-perception scale of the severity of the disease, a clinical progression scale developed by the WHO for clinical studies in COVID-19 and, at the first consultation, doctors´ overall impression on the clinical prognosis. The analysis of anonymized data should preferably use descriptive and inferential statistical resources. The case report form is available for free use in the protocol, along with examples of patient informed consent forms for the prescription of off-label medications and authorization to use the data. Their results may be useful to indicate interventions that are candidates for efficacy trials, in randomized controlled trials, with a higher chance of success. It respects the autonomy and preferences of doctors and patients to decide the best options for treatment in uncertain situations. It also allows the gathering of useful information for future more rigorous clinical trials, trying to link science, ethics, and personal clinical experience.

This study presents a novel technique utilizing high frequency vibration to shorten treatment time and preserve alveolar bone in challenging orthodontic cases treated with Invisalign® clear aligners. Four non-growing orthodontic patients (age range 14-47 years old) with Class II skeletal patterns (convex profiles with retrognathic mandibles) who sought correction of their crowded teeth and non-surgical correction of their convex profiles were included in this study. These patients were treated using Invisalign clear aligners together with high frequency vibration (HFV) devices (120 Hz) (VPro5™) that were used by all patients for five minutes per day during active orthodontic treatment. Vertical control and forward rotation of the mandible for each patient was achieved through pre-programming the Invisalign to produce posterior teeth intrusion. Successful forward rotation of the mandibles achieved in all patients led to improvement of their facial convex profiles (ANB improved 2.1 + 0.5 degrees; FMA improved 1.2 +1.1 degrees). Dental decompensation was achieved by lingual tipping of the lower incisors and palatal root torque of upper incisors. The use of HFV together with Invisalign facilitated achieving these results within a 12+6 month period. In addition, more bone labial to the lower incisors after their lingual movement was noted. In conclusion, the use of HFV concurrent with SmartTrack Invisalign aligners allowed complex tooth movement and forward projection without surgery in non-growing patients with skeletal Class II relationships. The clinical impact and implications of this case series is that the use of HFV facilitates complex orthodontic tooth movement including posterior teeth intrusion and incisor decompensation in addition to increased bone formation labial to lower incisors that may minimize future gum recession due to their labial inclination.

In an attempt to improve the quality of the agricultural drain in Egypt for its reuse again in the irrigation, low cost solution such as sand filter along with/ without other filtration media have been used in this research, As a result of that, pilot plant of sand filter mixed with other filtration media was tested for its ability to improve the sand performance in removing the suspended solids and organic matters from agricultural drain water of the Belbeis drain (in Sharkia governorate in Egypt). Only sand compared with sand with sponge and sand with Liyan Nanfang activated carbon (L.N.A.C) have been tested to find the optimum mixing sand/ medium ratio &optimum infiltration rate. The work has been done on four runs. It was found that sand mixed with sponge gave the best removal efficiency compared to that of the sand only and the sand mixed with L.N.A.C. The results presented that the concentration of CODt, CODsol and TSS was reduced from 125, 47 and 162 mg/l to 44, 34 and 28 mg/l respectively at optimum infiltration rate of 2 m³/m²/d for sand mixed with sponge.

In this experimental report the biocompatibility of elastomeric scaffold structures made via stereolithography employing table-top 3D printer (Ember, Autodesk) and commercial resin FormLabs Flexible (FormLabs) was studied. The samples were manufactured using standard printing and development protocol, which is known to inherit cytotoxicity due to remaining non-polymerized remaining monomers, despite the polymerized material being fully biocompatible. Additional steps were taken to remedy this problem: the fabricated structures were soaked in isopropanol and methanol for different conditions (temperature, duration) in order to leach out the non-polymerized monomers. Also printed structures were UV exposed to assure maximum polymerization degree of the material. Post-processed structures were seeded with myogenic stem cells and the number of live cells was evaluated as an indicator for the material biocompatibility. The straightforward post-processing protocol enhances the biocompatibility by 7 times after 7 days soaking in isopropanol and methanol and is comparable to control (glass and polystyrene) samples. This proposes the approach as a novel and simple method to be widely applicable for dramatic cytotoxicity reduction of optically 3D printed micro-/nano-scaffolds for biomedical applications.

Intermediate filaments constitute the third component of the cellular skeleton. Unlike actin and microtubule cytoskeletons, the intermediate filaments are composed of wide variety of structurally related proteins showing distinct expression patterns in tissues and cell types. Changes in expression patterns of intermediate filaments are often associated with cancer progression, in particular with phenotypes leading to increased cellular migration and invasion. In this review we will describe the role of vimentin intermediate filaments in cancer cell migration, cell adhesion structures, and metastasis formation. The potential for targeting vimentin in cancer treatment and the development of drugs targeting vimentin will be reviewed.

The recycling, incineration, and final disposal rate of municipal solid waste (MSW) are calculated based on the total amount of waste input to each facility in many countries. These statistic data have serious limitation in setting the national goal and policy for effective waste management because it is not considering the amount of foreign objectives in the process of each life-cycle stage. This case study is to estimate the actual rates of recycling, incineration, and final disposal by material flow analysis (MFA) after the collection of MSW in Korea. The actual rates of recycling, incineration and final disposal for MSW in 2016 were 49.9%, 32.9% and 23.1% respectively, indicating that the recycling rate was lower by 10.1%, while the incineration and final disposal rates were raised by 7.6% and 8.4% respectively, compared with the statistics for current MSW. In addition, the changed actual rates of recycling, incineration treatment, and final landfill, and variation of waste treatment charge according to treated amounts per treatment method was analyzed. This results of this study will contribute to establish national level of plan on effective waste management.

Background: The presence of HIV residual replication markers was investigated among distinct subgroups of individuals on antiretroviral treatment (ART). Methods: One hundred sixteen patients were distributed into 5 treatment groups: first-line suppressive ART with a non-nucleoside analog reverse-transcriptase inhibitor (NNRTI) (n = 26), first-line suppressive ART with boosted protease inhibitors (PI-r) (n = 25), suppressive salvage therapy using PI-r (n = 27), suppressive salvage therapy with PI-r and raltegravir (n = 22) and virologic failure (n = 16). Episomal and total DNA quantitation was evaluated. HIV antibody and LPS quantitation was performed. Results: Episomal DNA was positive in 26% to 38% of individuals under suppressive ART, and it was higher among ART virologic failure group (p = 0.04). HIV proviral load was higher among patients with detectable episomal DNA (p = 0.01). Individuals receiving initial PI-r treatment presented lower HIV antibody (p = 0.027) and LPS (p = 0.029) levels than individuals receiving NNRTI. There was a negative correlation between episomal DNA quantitation and the duration of suppressive ART (p = 0.04), CD4+ T-cell count (p = 0.08), and CD8+ T-cell count (p = 0.07). Conclusions: Residual HIV replication has been inferred among individuals under suppressive ART according to episomal DNA detection. Residual replication may decrease with longer periods of suppressive ART and higher levels of CD4+ and CD8+ T cells. The relationship between episomal DNA and total DNA suggests there is a replenishment of the proviral reservoir. Lower antibody and LPS levels among patients with initial PI-r ART suggest these regimens may more effectively suppress HIV, more effectively decreasing HIV antigenic component.

This study aims to determine the optimal configuration (position and operation duration) for wall mounted mechanical mixers based on the comparison of three-dimensional computational fluid dynamics (CFD) modelling results and physical data collected from the treatment plant. A three-dimensional model of anoxic zone 1, 2 and 3 of Northern Wastewater Treatment Plant (WWTP) located at Cairns Regional Council, Cairns, Queensland, Australia was developed and validated. The model was used to simulate the flow pattern of the WWTP and the simulation results are in good agreement with the physical data varying between 0% to 15% in key locations. The anoxic zones were subject to velocities less than the desired 0.3 metres per second however results for suspended solids concentration indicate that good mixing is being achieved. Results for suspended solids concentrations suggest that the anoxic zones are towards the upper limits recommended by literature for specific power dissipation. The duration for operation of mechanical mixers was investigated and identified that the duration could be reduced from 900 seconds down to 150 seconds. Alternative mixer positioning was also investigated and identified positioning which would increase the average flow velocity with decreased duration (150 seconds). The study identified that Council may achieve savings of $24,000 per year through optimisation of the mechanical mixers.

In this paper, ground tire rubber (GTR) was mechano-chemically modified with road bitumen 160/220 and subsequently treated using a microwave radiation. The combined impact of bitumen 160/220 content and microwave treatment on short-term devulcanization of GTR were studied by thermal camera, wavelength dispersive X-ray fluorescence spectrometry (WD-XRF), static headspace and gas chromatography-mass spectrometry (SHS-GC-MS), thermogravimetric analysis combined with Fourier transform infrared spectroscopy (TGA-FTIR), oscillating disc rheometer and static mechanical properties measurements. The obtained results showed that bitumen plasticizer prevent oxidation of GTR during microwave treatment and simultaneously improves processing and thermal stability of obtained reclaimed rubber.

This study investigated the removal characteristics of N-nitrosamines and their precursors at three pilot-scale water reclamation plants. These plants applies different integrated membrane systems: (1) microfiltration (MF) / nanofiltration (NF) / RO; (2) sand filtration/three-step RO; and (3) ultrafiltration (UF) / NF and UF / RO. Variable removal of N-nitrosodimethylamine (NDMA) by the RO membrane processes could be attributable to membrane fouling and feed water temperature. The effect of membrane fouling on N-nitrosamines removal was extensively evaluated at one of the plants by conducting one month of operation and chemical cleaning of the RO membrane element. Membrane fouling enhanced N-nitrosamines removal by the pilot-scale RO membrane process. This finding contributes to better understanding of variable removal of NDMA by RO membrane processes. This study also investigated the removal characteristics of N-nitrosamines precursors. The NF and RO membrane processes greatly reduced NDMA formation potential (FP), but the UF process had little effect. The contributions of MF, NF, and RO membrane processes for reducing FPs of NDMA, N-nitrosopyrrolidine (NPYR) and N-nitrosodiethylamine (NDEA) were different, suggesting different size distributions of their precursors.

Present work has systematically investigated the evolution of dispersoid and elevated-temperature properties including the strength and creep resistance during the various multi-step heat treatments in Al-Mn-Mg 3004 alloys. Results show that only α-Al(MnFe)Si dispersoid is observed in the studied temperature range (up to 625°C) and it coarsens with increasing temperature to 500°C but dissolves at 625°C. The evolution of elevated-temperature strength and creep resistance is greatly related to the temperature of each step during the multi-step heat treatments. Generally, lower temperature at the first-step heat treatment leads to higher properties while the properties decrease with increasing temperature of last-step heat treatment. Suitable models have been introduced to explain the evolution of strength and the creep threshold stress at elevated-temperature during the various heat treatments.

We aimed to investigate the relationship between membrane material and development of membrane fouling in a membrane bioreactor (MBR) using membranes with different pore sizes and hydrophilicities. Batch filtration tests were performed using submerged single hollow fiber membrane ultrafiltration (UF) modules with different polymeric membrane materials including cellulose acetate (CA), polyethersulfone (PES), and polyvinylidene fluoride (PVDF) with activated sludge taken from a municipal wastewater treatment plant. The three UF hollow fiber membranes were prepared by a non-solvent-induced phase separation method and had similar water permeabilities and pore sizes. The results revealed that transmembrane pressure (TMP) increased more sharply for the hydrophobic PVDF membrane than for the hydrophilic CA membrane in batch filtration tests, even when membranes with similar permeabilities and pore sizes were used. PVDF hollow fiber membranes with smaller pores had greater fouling propensity than those with larger pores. In contrast, CA hollow fiber membranes showed good mitigation of membrane fouling regardless of pore size. The results obtained in this study suggest that the surface hydrophilicity and pore size of UF membranes clearly affect the fouling properties in MBR operation when using activated sludge.

Late-stage epithelial ovarian cancer (EOC) involves widespread dissemination of malignant disease throughout the peritoneal cavity, often accompanied by ascites. EOC metastasis relies on the formation of multicellular aggregates, called spheroids. Given that Liver Kinase B1 (LKB1) is required for EOC spheroid viability and LKB1 loss in EOC cells decreases tumor burden in mice, we investigated whether the LKB1 complex controls invasive properties of human EOC spheroids. LKB1 signalling was antagonized through CRISPR/Cas9 genetic knockout of LKB1 and/or RNAi-dependent targeting of STE20-related kinase adaptor protein (STRAD; an LKB1 activator). EOC spheroids expressing nuclear GFP (green) or mKate2 (red) constructs were embedded in Matrigel for real-time live-cell invasion monitoring. Migration and invasion were also assessed in spheroid culture using Transwell chambers, spheroid reattachment, and mesothelial clearance assays. The loss of LKB1 and STRAD signalling decreased cell invasion through Matrigel and Transwell membranes, as well as mesothelial cell clearance. In the absence of LKB1, zymographic assays identified a loss of matrix metalloproteinase (MMP) activity, whereas spheroid reattachment assays found that coating plates with fibronectin restored the invasive potential. A three-dimensional EOC organoid model demonstrated that organoid area was greatly reduced by LKB1 loss. Overall, our data indicated that LKB1 and STRAD facilitated EOC metastasis by promoting MMP activity and fibronectin expression. Given that LKB1 and STRAD are crucial for EOC metastasis, targeting LKB1 and/or STRAD could disrupt the dissemination of EOC, making inhibitors of the LKB1 pathway an alternative therapeutic strategy for EOC patients.

Age-related macular degeneration (AMD) is an eye disease and the most common cause of vision loss in the Western World. In its advanced stage, AMD occurs in two clinically distinguished forms: dry and wet, but only wet AMD is treatable. However, the treatment based on repeated injections with vascular endothelial growth factor A (VEGFA) antagonists may at best stop the disease progression and prevent or delay vision loss but without an improvement of visual dysfunction. Moreover, it is a serious mental and financial burden for patients and may be linked with some complications. The recent first success of intravitreal gene therapy with ADVM-022, which transformed retinal cells to continuous production of aflibercept, a VEGF antagonist, after a single injection, has opened a revolutionary perspective in wet AMD treatment. Promising results obtained so far in other ongoing clinical trials support this perspective. In this narrative/hypothesis review, we present basic information on wet AMD pathogenesis and treatment, the idea of gene therapy in retinal diseases, update evidence on completed and ongoing clinical trials with gene therapy for wet AMD, and perspectives on the road to the clinic of “one and done” therapy for wet AMD to replace a lifetime of injections. Gene editing targeting the VEGFA gene is also presented as another gene therapy strategy to improve wet AMD management.

The assessment of Health-Related Quality of Life (HRQoL) in Thalassemia offers a holistic approach to the disease and facilitates better communication between physicians and patients. This study aimed to evaluate the HRQoL of Transfusion-Dependent Thalassemia (TDT) patients in Greece. This was a multicentre, cross-sectional study conducted in 2017, involving 283 adult TDT patients. All participants completed a set of two QoL questionnaires, the generic SF-36v2 and the disease-specific TranQol. Demographic and clinical characteristics were used to predefine patient subgroups. Significant factors identified in univariate analysis were entered into a multivariate analysis to assess their effect on HRQoL. The SF-36 scores of TDT patients were consistently lower, compared to the general population in Greece. The mean summary score of TranQol was relatively high (71±14%), exceeding levels observed in national surveys in other countries. Employment emerged as the most significant independent factor associated with better HRQoL, whereas age had the most significant negative effect. This study represents the first comprehensive QoL assessment in a representative sample of the TDT population in Greece. The implementation of TranQol allowed for the quantification of HRQoL in Greece, establishing a baseline for future follow-up, and identifying more vulnerable patient subgroups.

Age-related Macular Degeneration (AMD) is the major cause of elders’ vision loss, early screening and treatment are the most efficient way to reduce the rate of blindness. AI-based methods based on ophthalmic images play great potential for AMD diagnosis. However, low levels of accuracy, robustness, and explainability are challenges for AI approaches applied in clinics. Thus, this study proposed a multi-type of data source fusion method and a multi-model fusion approach for AMD detection. Typical unsupervised (Hierarchical Clustering and K-Means), typical supervised (SVM, VGG-16, and ResNet) methods, and proposed methods (multi-source data fusion-based method and multi-model fusion-based approach) are compared based on Optical Coherence Tomography (OCT), Fundus Autofluorescence (FAF), regular color fundus photography (CFP) and Ultra-Wide field Fundus (UWF) images. Data preprocessing and enhancements of each type of data are discussed. A feature extraction based on unsupervised ML models, feature combination and normalization, and multi-layer perception (MLP) algorithm are involved in the proposed multi-source data fusion-based method. Supervised ML and DL models and a voting mechanism are involved in the multi-model fusion-based approach. Findings show that the proposed methods present a high performance of accuracy and robustness. A real-world UWF database is involved from Shenzhen Aier Hospital. Practical and theoretical contributions are delivered. A reference value for medical diagnosis based on multiple digital images is contributed.

Vascular calcification (VC) is associated with increased cardiovascular risks in patients with chronic kidney disease (CKD). Sodium-glucose cotransporter 2 inhibitors, like empagliflozin, can improve cardiovascular and renal outcomes. We assessed the expression of Runt-related transcription factor 2 (Runx2), interleukin (IL)-1β, IL-6, AMP-activated protein kinase (AMPK), nuclear factor erythroid-2-related factor (Nrf2), and heme oxygenase 1 (HO-1) in inorganic phosphate–induced VC in mouse VSMCs to investigate the mechanisms underlying empagliflozin’s therapeutic effects. We evaluated biochemical parameters, mean artery pressure (MAP), pulse wave velocity (PWV), transcutaneous glomerular filtration rate (GFR), and histology in an in vivo mouse model with VC induced by an oral high-phosphorus diet following a 5/6 nephrectomy in ApoE−/− mice. Compared to the control group, empagliflozin-treated mice showed significant reductions in blood glucose, MAP, PWV, and calcification, as well as increased calcium and GFR levels. Empagliflozin inhibited osteogenic trans-differentiation by decreasing inflammatory cytokine expression and increasing AMPK, Nrf2, and HO-1 levels. Empagliflozin mitigates high phosphate–induced calcification in mouse VSMCs through the Nrf2/HO-1 anti-inflammatory pathway by activating AMPK. Animal experiments suggested that empagliflozin reduces VC in CKD ApoE−/− mice on a high-phosphate diet.

Migraine and neuropathic pain (NP) are evocative of painful, disabling, chronic conditions which exhibit resembling symptoms and thus considered to share a common etiology. Calcitonin gene-related peptide (CGRP) has gained credit as a target for migraine management; nevertheless, the efficacy and the applicability of CGRP modifiers warrant search for more effective therapeutic targets for pain management. This scoping review overviews human studies of common pathogenic factors in migraine and NP to explore potential novel therapeutic targets. CGRP causes inflammation in the meninges; monoclonal antibodies and inhibitors target CGRP. Gluta-mate-induced hyperexcitability and subsequent sensitization are closely linked to an alteration of the tryptophan (Trp)-kynurenine (KYN) metabolic system; the Trp-KYN system may serve as a potential target. Microglial overaction is observed in migraine and NP; modifying the microglial activity may be a possible approach. Cytokine-induced inflammation is a leading hypothesis of the pathogenesis of the conditions; alleviating neuroinflammation may complement a pain-relieving armamentarium. Transient receptor potential (TRP) ion channels evoke the release of several substances; TRP ion channels may potentially emerge as new targets. The endocannabinoid system plays a major role in the pain trafficking pathway; modification of the system may open a new path toward discovery of new analgesics. Here we highlight the mechanism of those common pathogenic factors to explore therapeutic targets for innovative pain management in migraine and NP.

SHANK3 encodes scaffold protein involved in postsynaptic receptor density in glutamatergic synapses, including those in the parvalbumin (PV)+inhibitory neurons – the key players in generation of sensory gamma oscillations, such as 40-Hz auditory steady-state response(ASSR). Here we describe a clinical and neurophysiological phenotype of a 15-years old girl (SH01) with microduplication of 16389 bp in 22q13.33, affecting the SHANK3 gene in comparison to typically developing children (n=32). EEG were recorded during the binaurally presentation of 40-Hz clicks’ trains lasting for 500 ms with inter-trial intervals 500-800 ms. SH01 was diagnosed with mild mental retardation and learning disabilities(F70.88) and had problems with reading and writing, as well as smaller vocabulary than TD peers. Her clinical phenotype generally resembled the phenotype of previously described patients with 22q13.33 microduplication. SH01 had mild autistic symptoms but below the threshold for ASD diagnosis. No seizures or MRI abnormalities were reported. While SH01 had relatively preserved auditory event-related potential(ERP) with slightly attenuated P1, her 40-Hz ASSR was totally absent significantly deviating from TD’s ASSR. Absence of 40-Hz ASSR in patient with microduplication, affected SHANK3 gene, indicates deficient temporal resolution of the auditory system, that might underlie language problems, and represent neurophysiological biomarker of SHANK3 abnormalities.

Although phylogenetic analysis shows coronaviruses (CoV) share similar genome sequences, CoVs encode different number of proteins (5 to 14), which has implication on viral pathogenicity and infection. Here, we aimed to identify (in-silico) the similarities between different members of coronavirus family. The analysis included 50 coronavirus proteomes, including SARS-CoV-2 (COVID-19), to find the variation of the number of protein functional motifs and domain in each coronavirus. For this role, we used the experimentally validated domain (motif) that known to be crucial for viral infection. Although human CoVs are classified within one genus, we found variations among them. SARS-CoV-1, SARS-CoV-2 and MERS-CoV encode different type of domains, which has implications on the molecular interactions triggered by each virus within human cells. Secondly, we used functional motifs to reconstruct the potential molecular pathways or interactions triggered by SARS-CoV-2 proteins within human cell.

Neuronal lesion or injury is a traditional approach to investigate neural circuit. Is any new neural pathway or new neurodegeneration related central nerve system injury? Spinal disc herniation can cause the spinal cord injury. However, the histological examination is still lack. It happened that a case of spinal disc herniation of a 10-year old dog was examined with NADPH diaphorase (N-d) histology. We did not find the N-d neurodegenerative aberrant in the tissue of the mid-rostral lumber segment besides the metamorphoses by the compression of the disc herniation. However, the severe neuropathological changes majorly occurred in the lumbosacral spinal cord. We found more diverse neurodegenerative alterations: the aging-related N-d body (ANB), megaloneurite and N-d homogeneous formazan globule in the lumbosacral spinal cord. We also found that a new circuit pathway (intermedial collateral pathway) showed by a megaloneurite between the lateral collateral pathway and the medial collateral pathway. The enormous notch caused by spinal disc herniation located at the mid-rostral lumber segments. The aging-related neurodegeneration occurred the specific lumbosacral segments. The homogeneous formazan globule was round or oval homogeneous N-d positivity which distributed in the gray matter and dorsal column. In the medulla oblongata, ANBs were revealed in the gracile nucleus, nucleus reticularis lateralis (ventrolateral spinal trigeminal nucleus) and middle of the spinal trigeminal nucleus.

The discharge of industrial effluents containing toxic heavy metals in water sources has serious consequences for human health and the environment, and biosorption appears to be an environmental-friendly and cost-effective alternative that can be used for wastewater treatment. The use of different types of agricultural waste as biosorbents for the removal of toxic heavy metals, although an alternative, is quite difficult to apply in practice because these wastes have many other uses. Based on these considerations, in this study, soybean biomass (SB), soybean waste biomass obtained from oil extraction (SBW) and biochar obtained from soybean waste pyrolysis (BC-SBW) were testes as biosorbents form the removal of Pb(II) and Cd(II) ions, in batch systems. Under optimal conditions (pH = 5.4, 4.0 g biosorbent/L, room temperature (25 ± 1 C), contact time = 180 min), the biosorption capacity increase in the order: SB < SBW < BC-SBW for both metal ions (Pb(II) ions (69.43 mg/g < 99.81 mg/g < 116.83 mg/g) and Cd(II) ions (25.63 mg/g < 36.12 mg/g < 49.10 mg/g)), indicating that BC-SBW has the highest efficiency in removing toxic heavy metals. In addition, experiments on wastewater samples have shown that, in addition to significant reducing the content of heavy metals, BC-SBW also significant improved other quality indicators (such as: pH, TSM, CCO-Cr, CBO5), compared to the other biosorbents (SB and SBW). Quantitative evaluation of the biosorptive performance of each biosorbent (SB, SBW and BC-SBW) shows that BC-SBW has a real chance of being used on an industrial scale for wastewater treatment. All these aspects allowed the development of a circular approach for the use of soybean biomass in the removal processes of toxic heavy metals. This approach minimizes the shortcomings of using biomass as a biosorbent and increase the chance of using these materials in industrial practice.

Objective: To explore the acceptability and feasibility of conducting comprehensive, community-based, hy-brid (in-person and virtual) mental health screening and feedback with diverse youth in the community. Methods: The Screening and Support for Youth intervention provides comprehensive assessment and thera-peutic feedback in community settings including symptoms, diagnoses, functional impairment, suicide, and clinical risk. Symptom severity, seven diagnoses and suicidality were assessed with the Kiddie Computer-ized Adaptive Test. Functional impairment was evaluated by youth self-report on the Weiss Functional Im-pairment Rating Scale. Measures were scored according to nationally developed norms and an algorithm was developed to aggregate symptoms and functioning to determine clinical risk. The results were discussed with participants in a motivational interview to promote insight and engagement in an online intervention. Results: Methodological innovations included using a QR code for recruitment, integrated in-person and virtual participation, and expansion from in-person recruitment within the schools to virtual engagement with youth throughout the community. The final sample included disproportionately more Black or African American and Hispanic youth as compared to school and community statistics, suggesting that hybrid re-search may facilitate recruitment of diverse populations. Qualitative interviews indicated that the screening and feedback raised youth awareness of their wellbeing and/or distress, its impact on their functioning, and engagement with options for improving wellbeing. Conclusion: Hybrid research, developed as a necessity during the pandemic, proved advantageous to the feasibility and acceptability of community-based recruit-ment of at risk, minoritized youth.

A major cause of genital discomfort in women around the world is bacterial vaginosis, which results from excessive growth of pathogenic bacteria in the vaginal ecosystem. Current treatment consists of antibiotics and/or probiotics, which show favourable therapeutic effects, but also cause problems such as drug resistance and recurrence. Considering faecal transplantation's success, transplantation of vaginal fluid from healthy donors could provide the most effective treatment for bacterial vaginosis. However, experimental treatments have shown that vaginal microbiome transplantation may not be a one-size-fits-all solution. The present article examines the limitations of current standardized therapy, the advantages of vaginal microbiome transplantation, and presents future novel strategies for treating bacterial vaginosis based on current research findings and clinical trials development worldwide.

Liver disease can significantly impact life expectancy, making early diagnosis and therapeutic intervention critical challenges in medical care. Imaging diagnostics play a crucial role in diagnosing and managing liver diseases. Recently, the application of artificial intelligence (AI) in medical imaging analysis has become indispensable for healthcare. AI, trained on vast datasets of medical images, has sometimes demonstrated diagnostic accuracy that surpasses human experts. AI-assisted imaging diagnostics are expected to contribute significantly to the standardization of diagnostic quality. Furthermore, AI has the potential to identify image features imperceptible to humans, thereby playing an essential role in clinical decision-making. This capability enables physicians to formulate more accurate diagnoses and develop effective treatment strategies, ultimately improving patient outcomes. Additionally, AI is anticipated to become a powerful tool in personalized medicine. By integrating individual patient imaging data with clinical information, AI can propose optimal treatment plans, making it an essential component in providing the most appropriate care for each patient. Current reports highlight the advantages of AI in managing liver diseases. As AI technology continues to evolve, it is expected to further advance personalized diagnostics and treatments, contributing to overall improvements in healthcare quality.

Drug-resistant tuberculosis (DR-TB) and HIV-coinfection present a conundrum to public health globally, and the achievement of the global END TB strategy in 2035. A descriptive, retrospective review of medical records of patients diagnosed with DR-TB who received treatment was conducted. Student’s t-test was performed to assess differences between two means and ANOVA between groups. Either the Chi-square test with and without trend or Fischer’s exact test was used to test the degree of association of categorical variables. Logistic regression was used to determine predictors of DR-TB treatment outcomes. Also, a decision tree classifier, which is a supervised machine learning algorithm was used. Python version 3.8. and R version 4.1.1 software were used for data analysis. A p-value of 0.05 with a 95% confidence interval (CI) was used to determine statistical significance. A total of 456 DR-TB patients were included in the study with more male patients (n = 256, 56.1%) than female patients (n = 200, 43.9%). The overall treatment success rate was 61.4%. There was a significant decrease in the % of patients cured during the Covid-19 pandemic compared to the pre-pandemic period. Our findings showed that machine learning can be used to predict TB patients' treatment outcomes.