Vegetation in drylands is sensitive to climatic changes and human activities. Remote sensing and spatial analyses provide us useful tools for monitoring long-term vegetation dynamics over large regional scale. In this study, we analyzed the oasis vegetation cover change of the Tarim Basin using Landsat data sets from six epochs, 1975s, 1990s, 2000s, 2005s, 2010s and 2014. The results show that vegetation cover of oases increases from 34600 km² in 1975s to 101000 km² in 2014, though there was a vegetation coverage decrease from 77600 km² in 2000s to 42680 km² in 2010s. The percentage of annul water consumption has increased from 34% in 1970s to 52% in 2010s in the upper Tarim River, and decreased from 15% in 1970s to 9% in 2010s in the lower Tarim River. The decrease of oases area from 2000s to 2010s probably resulted from the rapid urbanization and large scale land reclamation. Although there is an increasing trend for oases coverage, local degradation of oases especially in the northern part occurred. This may be caused by inadequate water supply of the Tarim River. The results of multiple regression show that human activities contribute 70% of oases area change. Human induced water resources reallocation and heat energy balance is the primary cause of total oasis change.

In the study, a new correction method was applied to reduce error during detection on mixed pesticide residue in apples by using Raman spectra. Combined with self-built pesticide residues detection system by Raman spectroscopy and the application of surface enhancement technology, rapid real-time qualitative and quantitative analysis of deltamethrin and acetamiprid residues in apples can be applied effectively. In quantitative analysis, compared with the intensity value of characteristic peaks of single pesticide with same concentration, the intensity value of characteristic peaks of the two pesticides decreased after mixing the pesticides, which interferes the results severely. By comparing the difference in the intensity of characteristic peaks of single and mixed pesticides, a correction method is proposed to eliminate the influence of pesticides mixture. Characteristic peak intensity values of gradient concentration pesticide from 10-1 g•kg-1 to 10-6 g•kg-1 and Lagrangian interpolation are applied in the correction method. And a smooth surface is applied to describe the correction ratio of characteristic peak intensity. Through detecting the characteristic peak intensity values of the mixed pesticide, correction ratio will be obtained. Then real values of the peak intensity of pesticides and the content of each component of the mixed pesticide will be acquired by the correction method. Correlation coefficient of model validation exceeds 0.88 generally and Root Mean Square Error also decreases obviously after correction, which proved the reliability of the method.

An ethanol vapor sensor based on a microfiber with quantum-dots (QDs) gel coating is proposed and demonstrated. The QDs gel was made from UV glue as the gel matrix and the CdSe/ZnS QDs with a concentration of 1mg/mL. The drawing and coating process were conducted by using a simple and low-cost home-made system. The bending, ethanol sensing, temperature response and time response tests were carried out, alternatively. The experimental results show that the fabricated sensor has a high sensitivity of -3.3%/ppm, a really low temperature cross-sensitivity of 0.17 ppm/℃ and a fast response time of 1.1s. The robust structure with ease of fabrication and excellent sensing performance render it a promising platform for real ethanol sensing application.

Due to the limitations on the capabilities of current robots regarding task learning and performance, imitation is an efficient social learning approach that endows a robot with the ability to transmit and reproduce human postures, actions, behaviors, etc., as a human does. Stable whole-body imitation and task-oriented teleoperation via imitation are challenging issues. In this paper, a novel comprehensive and unrestricted real-time whole-body imitation system for humanoid robots is designed and developed. To map human motions to a robot, an analytical method called geometrical analysis based on link vectors and virtual joints (GA-LVVJ) is proposed. In addition, a real-time locomotion method is employed to realize a natural mode of operation. To achieve safe mode switching, a filter strategy is proposed. Then, two quantitative vector-set-based methods of similarity evaluation focusing on the whole body and local links, called the Whole-Body-Focused (WBF) method and the Local-Link-Focused (LLF) method, respectively, are proposed and compared. Two experiments conducted to verify the effectiveness of the proposed methods and system are reported. Specifically, the first experiment validates the good stability and similarity features of our system, and the second experiment verifies the effectiveness with which complicated tasks can be executed. At last, an imitation learning mechanism in which the joint angles of demonstrators are mapped by GA-LVVJ is presented and developed to extend the proposed system.

A lightweight composite bridge deck system composed of steel orthotropic deck stiffened with thin Ultra-High Performance Concrete (UHPC) layer is developed to eliminate fatigue cracks in orthotropic steel decks. During the construction and operation period of the bridge, the debonding between the steel deck and the UHPC layer may introduce the several issues, such as crack-induced water invasion and distinct reduction of the shear resistance. In the study, an effective and novel non-destructive interface condition monitoring approach using piezoelectric lead zirconate titanate (PZT)-based technologies is proposed to detect interfacial delamination between steel deck and UHPC layer. Experimental tests are performed on several steel-UHPC composite slabs and a conventional steel-concrete composite slab. The thin styrofoam sheets with different sizes and thicknesses are set on different locations of the steel deck as the artificial debondings. The PZT ceramic patches are bonded on the surfaces of the steel deck and UHPC layer as the actuators/sensors. An improved PSO (Particle Swarm Optimization)-K-means clustering algorithms is proposed to obtain the debonding patterns based on the feature data set. The laboratory tests demonstrate that the proposed approach provides an effective and accurate way to detect interfacial debonding of steel-UHPC composite slab.

BACKGROUND: Chronic hepatitis B infected with Hepatitis B virus remains a major health concern worldwide. Despite standard interferon-α and nucleotide analogues have been shown to reduce the deterioration of liver disease among chronic hepatitis B patients, covalently closed circular DNA was still difficult to eradicate. METHODS: A literature search of Pubmed and Web of science was performed with the following key words: ‘CRISPR’, ‘CRISPR/Cas9’, ‘hepatitis B’, ‘HBV’, ‘chronic hepatitis B’ and ‘HBV cccDNA’. The information about CRISPR/Cas9 for the treatment of HBV cccDNA or hepatitis B was reviewed. RESULTS: CRISPR/Cas9 could treat hepatitis B through suppressing or clearing HBV cccDNA with different gRNAs. CONCLUSION: With the emergence of CRISPR/Cas9 (the RNA-guided clustered regulatory interspaced short palindromic repeats, CRISPR) editing technology, clearance of hepatitis B virus and better prevention of liver carcinoma seemed to be possible.

As a new type of gear, bevoloid gears have the advantages of compensating axial error, smooth transmission, and eliminating turning error, and they are widely used in applications requiring high transmission accuracy and stability. However, research on calculating the time-varying mesh stiffness of bevoloid gears is still limited, and there is an urgent need to propose a method that can calculate the stiffness of bevoloid gears quickly and accurately. This paper first establishes the bevoloid gear tooth profile expressions, then assumes a pair of bevoloid gears meshing with the same rack and derives the contact line equations of parallel axis bevoloid gear pairs, and analyze the contact process of bevoloid gears. We propose an analytical algorithm that uses the slicing method to calculate the stiffness of helical gears, straight bevoloid gears, and helical bevoloid gears, change the parameters of helical bevoloid gears respectively, and analyze the influence of different parameters on stiffness. Finally, the finite element method is used to verify the analytical method, and the correctness of the analytical calculation results is verified, and the errors are analyzed.

To address the deficiency of existing relation extraction models in effectively extracting relational triplets pertaining to railway traffic knowledge in Tibet, this paper constructs a Tibet Railway Traffic text dataset and provides an enhanced relation extraction model. The proposed model incorporates subject feature enhancement and relational attention mechanisms. It leverages a pre-trained model as the embedding layer to obtain vector representations of text. Subsequently, the subject is extracted and its semantic information is augmented using an LSTM neural network. Furthermore, during object extraction, the multi-head attention mechanism enables the model to prioritize relations associated with the aforementioned features. Finally, objects are extracted based on the subjects and relations. The proposed method has been comprehensively evaluated on multiple datasets, including the Tibet Railway Traffic text dataset and two public datasets. The results on the Tibet dataset achieves an F1-score of 93.3\%, surpassing the baseline model CasRel by 0.8\%, indicating a superior applicability of the proposed model. On the other hand, the model achieves F1-scores of 91.1\% and 92.6\% on two public datasets, NYT and WebNLG, respectively, outperforming the baseline CasRel by 1.5\% and 0.8\%, which highlights the good generalization ability of the proposed model.

Some biologically active compounds isolated from sea cucumbers stimulate the body’s immune response through activating immune cells. Immune function is closed related to the integrity intestinal barrier and balanced gut microbiota. However, it is unknown whether daily administration of holothurian wall hydrolysates (HWH) ameliorated intestinal dysbiosis and barrier injury induced by immunodeficiency. This study aimed to investigate the immunomodulatory effect and the underlying mechanism of HWH in cyclophosphamide (CTX)-induced immunocompromised mice. BALB/c mice received CTX (80 mg/kg, intraperitoneally) once a day for 3 days to induce immunodeficiency, and then oral administration of HWH (80 or 240 mg/kg), levamisole hydrochloride (LH, 40 mg/kg, positive control) respectively once a day for 7 days. We utilized 16S rRNA sequencing for microbial composition alterations, histopathological analysis for splenic and colonic morphology, Western blotting for expressions of tight junction proteins (TJs), and quantitative real-time (qRT-PCR) for measurements of pro-inflammatory cytokines. HWH attenuated the immune organ damage induced by CTX, increased the secretions of interleukin (IL)-6, IL-1β and tumor necrosis factor (TNF)-α, and promoted the recovery of goblet cells and the productions of TJs (claudin-1, occludin, and ZO-1) in the colon of the immunocompromised mice. Moreover, HWH promoted the growth of beneficial microorganisms such as Lactobacillus, Lachnospiraceae, Christensenellaceae, and Bifidobacterium, while suppressed the populations of Ruminococcus, Staphylococcus, and Streptococcus. These results demonstrate that HWH elicits intestinal mucosal immunity, repairs the damage to intestinal mucosal integrity, and normalizes the imbalanced intestinal microbial profiles in immunocompromised mice. It may be helpful to identify the biological activities of HWH, and supports the potential as new prebiotics, immunomodulatory agents, and medical additive for intestinal repair.

The connexin gene family is the most prevalent gene that contributes to hearing loss. Connexins 26 and 30, encoded by GJB2 and GJB6 respectively, are the most abundant expressed connexins in the inner ear. Connexin 43 which is encoded by GJA1 appears to be widely expressed in various organs, including the heart, skin, brain, and inner ear. The mutations that arise in GJB2, GJB6 and GJA1 can all result in comprehensive or non-comprehensive genetic deafness in newborns. As it is predicted that connexins include at least 20 isoforms in humans, the biosynthesis, structural composition, and degradation of connexins must be precisely regulated so that the gap junctions can operate properly. Certain mutations result in connexins possessing a faulty subcellular localization, failing to transport to the cell membrane and preventing gap junction formation, ultimately leading to connexin dysfunction and hearing loss. In this review, we provide a discussion of the transport models for connexin 43, connexins 30 and 26, mutations affecting trafficking pathways of connexin 26, the existing controversies in trafficking pathways of connexins, and the molecules involved in connexin trafficking and their functions. This review can contribute to a new way of understanding the etiological principles of connexin mutations and finding therapeutic strategies for hereditary deafness.

Industrial nameplates serve as a means of conveying critical information and parameters. In this work, we propose a novel approach for rectifying industrial nameplate pictures utilizing a probabilistic Hough transform. Our method effectively corrects for distortions and clipping, and features a collection of challenging nameplate pictures for analysis. To determine the corners of the nameplate, we employ a progressive probability Hough transform, which not only enhances detection accuracy but also possesses the ability to handle complex industrial scenarios. The results of our approach are clear and readable nameplate text, as demonstrated through experiments that show improved accuracy in model identification compared to other methods.

Identifying fake news on the media has been an important issue. This is especially true considering the wide spread of rumors on the popular social networks such as Twitter. Various kinds of techniques have been proposed for automatic rumor detection. In this work, we study the application of graph neural networks for rumor classification at a lower level, instead of applying existing neural network architectures to detect rumors. The responses to true rumors and false rumors display distinct characteristics. This suggests that it is essential to capture such interactions in an effective manner for a deep learning network to achieve better rumor detection performance. To this end we present a simplified aggregation graph neural network architecture. Experiments on publicly available Twitter datasets demonstrate that the proposed network has performance on a par with or even better than that of state-of-the-art graph convolutional networks, while significantly reducing the computational complexity.

Pneumonia caused by a new coronavirus SARS-CoV-2 has caused serious harm to people's lives and health in Wuhan, China. By February 26, 2020, over 80,000 people were infected and 2,814 died from the infection. The initial route of infection is the binding of the spike protein (S protein) of the virus to the angiotensin-converting enzyme 2 (ACE2). From bioinformatics analysis, we found that the S protein of SARS-CoV-2 produced an evolutionary mutation of K403R compared with the S protein of SARS-CoV, forming an adjacent RGD motif at the interaction surface. As the RGD motif is considered as a ligand for many cell surface integrins, we proposed that the binding of S protein of SARS-CoV-2 with integrins may facilitate the infection process of the virus. Therefore, high-throughput virtual screening was performed by choosing the key residues of S protein interface of SARS-CoV-2 and the adjacent RGD motif as potential binding site, to search for the potential agents targeting interaction of S protein of SARS-CoV-2 with both ACE2 and integrins as potential therapeutic drugs. Various libraries including the FDA-approved drugs etc. were screened, and Nadide, Losartan, 9'''-Methyllithospermate B and Leonurine etc. were identified as representative potential drugs candidate for COVID-19.

This paper proposes a novel micro-grid structure, which can operate fully-autonomously with inherent seamless switching. It can operate independently in both grid-connected and islanded mode as a self-governed entity without relying on the utility grid. An AC/DC/AC converter is employed as the interface between the micro-grid and the utility grid, which enables the two entities to have different voltages in grid-connected mode. Seamless switching between operation modes can be achieved naturally. The micro-grid is regulated to exchange predefined amount of power with the utility grid in grid-connected mode. This will benefit the power dispatching algorithm of the power system. The predefined power is estimated based on power forecasting of local renewable generations and loads with consideration of the Sate of Charge (SOC) of the battery, and is updated and broadcasted every certain period. A small scale AC micro-grid with a rotating generator, battery storage and solar arrays etc. is built for investigation. Matlab/Simulink results are provided to validate the robustness and flexibility of proposed micro-grid and its operation strategy.

The detection of temporary color steel buildings and the analysis of their spatiotemporal patterns and characteristics are of great importance in many developing cities, because areas densely distributed with color steel buildings are usually problematic regions with high population density, sustainable development and risk level, which are challenging for local governments. Using the high-resolution satellite images of the Anning District, Lanzhou City, China as the case study, this paper first extracts the information of the color steel buildings for two different periods. Then the spatiotemporal distributional characteristics of the color steel buildings are analyzed, both at small scale (temporary buildings) and large scale (planthouses, warehouses, etc.). Finally, this paper utilizes kernel density estimation, Delaunay triangulation and Voronoi diagrams to examine the spatial distribution, aggregation and proximity characteristics of the color steel buildings. Our experiments show that the temporal and spatial differences of urban development, the phased characteristics and urban space are represented by various types of color steel buildings. Thus, there are some robust coupling relationship between color steel buildings, urban spatial form and urban development.

Stess in laser cladding coating is an important factor affecting the safe operation of remanufacturing components. Ultrasonic testing has become a hot direction in nondestructive evaluation of stress, because it has the advantages of safety, non-destructive and on-line detection. This paper provides a review of ultrasonic testing for stress in remanufacturing laser cladding coating. It summarizes the recent research outcomes on ultrasonic testing for stress, analyzes mechanism of ultrasonic testing for stress. Remanufacturing laser cladding coating shows typical anisotropic behaviors, the ultrasonic testing signal in laser cladding coating is influenced by many complex factors, such as microstructure, defect, temperature and surface roughness, etc. At present, ultrasonic testing for stress in laser cladding coating can only be done roughly. The paper discusses active mechanism of micro / macro factors to the reliability of stress measurement and the impact of stress measurement to the quality and safety of remanufacturing components. Base on the discussion, the paper proposes strategies for acquisition of nondestructive, rapid and accurate measurement of stress in remanufacturing laser cladding coating.

To explore the forage quality of wild oat populations under different growth environments, the basic nutrient composition and forage quality of five wild oat populations in Israel were compared. Ash, crude protein, and soluble sugar content of oats were significantly (P<0.05) related to some forage quality and possible environment of population origin. Among them, the environmental factors of origin had significant effects on the indicators of ash, crude protein, and soluble sugars of oat straw, but less on the contents of crude fat, total phosphorus, and total potassium. Meanwhile, the annual rainfall and the number of days of rainfall in the country of origin greatly influenced the cellulose content. Finally, we investigated the similarity of feeding values of different populations using PCA analysis. The results showed that, in conclusion, the higher variability of wild oat populations may be a new possibility brought by feeding oats.

Brassica yellows virus (BrYV) is a tentative species of the genus Polerovirus, which occurs widely and mostly damage Brassicaceae plants in East Asia. Since BrYV could not be transmitted mechanically, an insect transmission method is required for further virus research. Here, a reliable and unrestricted method was described, in which non-viruliferous aphids (Myzus persicae) acquired BrYV from transgenic Arabidopsis thaliana plants with virus full length genome germinated from seeds and frozen infected leaves were used to transmit the virus to healthy plants, and there was no significant difference in acquisition rate though transmission rate from frozen infected leaves was somehow lower compared to fresh infected leaves. This novel simple method could be applied to preservation of virus inocula, evaluation of variety resistance to BrYV, biological research on interaction among BrYV, aphid and host, which also provide a new idea on establishing a basic method using virus genomic transgenic plants or frozen infected leaves for other poleroviruses research.

The refractive index of seawater is one of the essential parameters in ocean observation, so it is necessary to achieve high precision seawater refractive index measurement. In this paper, we propose a method for measuring the refractive index of seawater based on a Position Sensitive Detector (PSD). Theoretical model is established to depict the correlation between laser spot displacement and refractive index change, utilizing a combination of position sensitive detector and laser beam deflection principle. Based on this optical measurement method, a seawater refractive index measurement system was established. To effectively enhance the sensitivity of refractive index detection, a focusing lens was incorporated into the optical path of the measuring system, and simulations were conducted to investigate the impact of focal length on refractive index sensitivity. The calibration experiment of the measuring system was performed based on the relationship between refractive index of seawater and underwater pressure (depth). By measuring laser spot displacement at different depths, changes in displacement with respect to both refractive index and depth were determined. Experimental results demonstrate that the system exhibits a sensitivity of 9.9277×10−9RIU (refractive index unit), the refractive index deviation due to stability is calculated as ±7.545×10−9RIU. Thereby the feasibility of highly sensitive measurement of seawater refractive index is verified.

The traditional receiver employs scalar tracking loops, resulting in degraded navigation performance in weak signal and high dynamic scenarios. An innovative design of a vector tracking receiver based on nonlinear Kalman filter (KF) tracking loops is proposed in this paper, which combines the strengths of both vector tracking and KF tracking loops. Firstly, a comprehensive description of the vector tracking receiver model is presented, and unscented Kalman filter (UKF) is applied to nonlinear tracking loop. Secondly, to enhance the stability and robustness of the KF tracking loop, we introduce square root filtering and an adaptive mechanism. The tracking loop based on square root UKF (SRUKF) can dynamically adjust its filtering parameters based on signal noise and feedback Doppler error. Finally, the proposed method is implemented on a software-defined receiver (SDR), and the field vehicle experiment demonstrates the superiority of this method over other receivers in complex dynamic environments.

Focal adhesions (FAs) play a crucial role in cell spreading and adhesion, and their autophagic degradation is an emerging area of interest. Our study investigates the role of Thrombospondin Type 1 Domain-Containing Protein 1 (THSD1) in regulating autophagy and FA stability in brain endothelial cells, shedding light on its potential implications for cerebrovascular diseases. Our research reveals a physical interaction between THSD1 and FAs. Depletion of THSD1 significantly reduces FA numbers, impairing cell spreading and adhesion, in an autophagy-dependent manner. Intriguingly, THSD1-mediated autophagy activation operates independently of changes in mTOR and AMPK activation, implying that THSD1 primarily governs FA dynamics rather than serving as a global regulator of nutrient and energy status. Interestingly, THSD1 negatively regulates Beclin 1, a central autophagy regulator, at FAs through interactions with focal adhesion kinase (FAK). The loss of THSD1 diminishes FAK activity, consequently relieving its inhibitory phosphorylation on Beclin 1. This, in turn, promotes the complex formation between Beclin 1 and ATG14, a critical event for the activation of the autophagy cascade. In summary, our findings identify THSD1 as a novel regulator of autophagy that degrades FAs in brain endothelial cells. This underscores the distinctive nature of THSD1-mediated, cargo-directed autophagy and its potential relevance to vascular diseases due to the loss of endothelial FAs. Investigating the underlying mechanisms of THSD1-mediated pathways holds promise for discovering novel therapeutic targets in vascular diseases.

Cathode materials based on SrCoO3- perovskite-type oxides hold great potential, given the huge oxygen permeability exhibited by the cubic phase of this oxide, which must be stabilized though suitable cationic substitutions. We present here two novel materials of the series Sr1-xYxCoO3- (x= 0.1, 0.2), prepared by solid state reactions. The crystalline structure was explored by neutron powder diffraction. At RT, we identified a subtle tetragonal superstructure, yet preserving the wanted framework of vertex-sharing CoO6 octahedra. A noteworthy result of the neutron analysis is the presence of conspicuous amounts of oxygen vacancies, ordered in layers and responsible for the formation of the mentioned superstructure. The stability was investigated by thermal analysis, using thermogravimetry (TGA). The electrical conductivity gave a maximum value of 800 °C of 122 S·cm–1. To determine the resistance associated with the oxygen reduction reaction (ORR), electrochemical impedance spectroscopy as a function of temperature was carried out, finding a value for the activation energy of Ea= 0.82 eV. This is a much lower value than that usually obtained for cathodes with a high catalytic activity for the oxygen reduction reaction. In single-cell tests, the materials generated a power density up to 0.25 Wcm−2 at 800ºC, using pure H2 as fuel. All these features make this perovskite a suitable candidate as cathode material in intermediate-temperature SOFCs

The analysis of water inflow is a key issue in the construction of subsea tunnels. However, present research on the water inflow of subsea tunnels is predominantly focused on single-bore tunnels. Given the current practices in engineering, it is common to see a parallel configuration of three bores. In such cases, the proximity of tunnels to one another might result in alterations to the water inflow due to the interplay of seepage fields. This paper begins by conducting a numerical simulation to assess the water inflow characteristics of a three-bore parallel subsea tunnel. The study then investigates the impact of many factors, including the permeability coefficient of the surrounding rock, the depth of the seawater, the depth of the tunnel, the spacing between tunnels, and the relative size of the tunnels, on the water inflow phenomenon. Furthermore, based on the principles of the analytic hierarchy process and fuzzy mathematics, a comprehensive assessment framework is developed to evaluate the water inflow of three-bore parallel subsea tunnels. Ultimately, this grade of water inflow is used in practical engineering. The results show that there is mutual influence between the three parallel tunnels, and the predicted water inflow will be too large if the single tunnel model is adopted. The interaction between tunnels should be considered in the water inflow grade evaluation system of the three-hole parallel submarine tunnel. Engineering cases show that using a single-hole tunnel model without considering the interaction between tunnels will lead to higher water inflow grades. The research results of this paper can provide guidance for the waterproofing and drainage design of three parallel subsea tunnels and the stability analysis of surrounding rocks.

Recently, there has been a growing interest in distributed edge computing resource scheduling. For example, application scenarios such as intelligent traffic systems and Internet of Things(IoT) intelligent monitoring require the scheduling and migration of distributed resources. Distributed resource scheduling needs to consider the cost of resource scheduling, with the primary goal of finding the optimal strategy among various feasible solutions. There are different definitions for optimization objectives in different application scenarios, such as cost, transmission delay, energy consumption, etc. Current research mainly considers the optimization problem of local resource scheduling but needs more consideration of global resource scheduling. This paper defines a global resource scheduling problem for distributed edge computing and proves that the problem is NP-Hard. A heuristic solution strategy based on the Ant Colony Algorithm(ACO) was proposed, and Particle Swarm Optimization(PSO) was used to optimize the parameters of the ACO. Finally, an experimental comparative analysis was conducted to demonstrate that the algorithm proposed in this paper has good accuracy and iteration cost performance.

The rapid growth of Artificial Intelligence (AI) has led to considerable progress in Automated Fact Verification (AFV). This process involves collecting evidence for a statement, assessing its relevance, and predicting its accuracy. Recently, research has begun to explore automatic explanations as an integral part of the accuracy analysis process. However, the explainability within AFV is lagging compared to the wider field of explainable AI (XAI), which aims at making AI decisions more transparent. This study looks at the notion of explainability as a topic in the field of XAI, with a focus on how it applies to the specific task of Automatic Fact Verification. It examines the explainability of AFV, taking into account architectural, methodological, and dataset-related elements, with the aim of making AI more comprehensible and acceptable to the general society. Although there is a general consensus on the need for AI systems to be explainable, there a dearth of systems and processes to achieve it. In this research, we investigate the concept of explainable AI in general and demonstrate its various aspects through the particular task of Automated Fact Verification. We explore topic of faithfulness in the context of local and global explainability and how these correspond with architectural, methodological and data-based ways of achieving it. We examine these concepts for the specific case of AFV and analyze the current datasets used for AFV and how they can be adapted to further the identified aims on XAI. The paper concludes by highlighting the gaps and limitations in current data science practices and possible recommendations for modifications in architectural and data curation processes that would further the goals of XAI.

Based on the analysis of the working principle, circuit design and working loss of the common charger DC/DC converter, this paper designs a ZVS half-bridge three-level DC/DC converter based on non-phase-shift control mode, and proposes a multi-stage constant current and voltage limiting charging control strategy based on modulation wave selection control. The simulation results show that the proposed method and control strategy have faster voltage regulation ability and wider stability margin, and can achieve stable current sharing control in the charging process.

The fatigue life of concrete is affected by many interwoven factors whose effect is nonlinear. Be-cause of its unique self-learning ability and strong generalization capability, the Bayesian regu-larized backpropagation neural network (BR-BPNN) is proposed to predict concrete behavior in tensile fatigue. The optimal model was determined through various combinations of network parameters. The average relative impact value (ARIV) was constructed to evaluate the correla-tion between fatigue life and its influencing parameters (maximum stress level Smax, stress ratio R, static strength f, failure probability P). ARIV results were also compared with other factor as-sessment methods (weight equation and multiple linear regression analyses). Using BR-BPNN, S-N curves were then obtained for the combinations of R=0.1, 0.2, 0.5; f=5, 6, 7MPa; P=5%, 50%, 95%. The tensile fatigue results under different testing conditions were finally compared for compatibility. It was concluded that Smax has the most significant negative effect on fatigue life; the degree of influence of R, P, and f, which positively correlate with fatigue life, decreases suc-cessively. ARIV is confirmed as a feasible way to analyze the importance of parameters and could be recommended for future applications. The tensile fatigue performance of plain concrete under different stress states (flexural tension, axial tension, splitting tension) does not differ sig-nificantly. Besides utilizing the valuable fatigue test data scattered in the literature, insights gained from this work could provide a reference for subsequent fatigue test program design and fatigue evaluation.

By reviewing the research of development economics in recent years, five key terms of ‘innovation, coordination, green, openness and sharing’ are extracted, corresponding to the five dimensions of the New Development Concept advocated by China. Based on this, an evaluation index system of the development quality of China's fishery industry is constructed. The spatio-temporal characteristics of China's fishery industry development quality were analyzed by using the provincial panel data from 2007 to 2017. The results show that: i) China's fishery industry overall development quality continues to grow, while the variation of provincial quality is also increasing, and the contribution of innovation quality and sharing quality is increasing, becoming an important sub-dimension leading the overall development quality.ii) there is a significant spatial dependence among provincial quality, and the significance is further strengthening. The Hangzhou Bay area and Bohai Bay area have gradually become a dual-core area where the high-quality development of China's fishery industry agglomeration, and the radiation from the dual-core area to the peripheral areas may still be in the process of enhancement. The spatial and temporal distribution of China’s fishery industry development quality keeps the trend of ‘from northeast to southwest’, which is almost parallel to Hu Huanyong line. The gravity center of its distribution is close to the gravity center of Chinese population and economy, and the development quality experienced a process from relatively concentrated to dispersed and then returned to concentrated, and the development speed in the later period was higher than that in the earlier period. iii) Capital accumulation level is the dominant positive influencing factors, while government support level is the dominant negative influencing factors respectively, and both have significant spatial differentiation among provinces.

A series of novel superabsorbent composites of poly(acrylic acid)/semicoke were prepared by polymerization of acrylic acid using ammonium persulphate as initiator, N,N’-methylenebisacrylamide as crosslinker and semicoke which was the by-product of coal carbonizing as the inorganic components. FTIR and SEM analysis indicated that the superabsorbent composites had been successfully polymerized and the semicoke participated into the construction of 3D polymeric network. Meanwhile, the effects of initiator, crosslinker, semicoke, neutralization degree as well as the pH value were investigated, and the results showed that superabsorbent composites containing 10% of semicoke possessed the maximum water absorbency of 584 g/g in distilled water and 75 g/g in 0.9 % NaCl solution. The superabsorbent composites kept the high water absorbency within a wide pH range of 4-11, and still exhibited better re-swelling capability even after seven times. The superabsorbent composite with the excellent performance is a potential water-retaining agent used in the agriculture.

Dryland winter wheat in Loess Plateau is facing yield reduction due to shortage of soil moisture and delayed sowing time. Field experiment was conducted at Loess Plateau in Shanxi Province, China from 2012 to 2014, to study the effect of subsoiling and conventional tillage and different sowing dates on the soil water storage and contribution of N accumulation and remobilization to yield of winter wheat. The results showed that subsoiling significantly improved the soil water storage at 0-300 cm depth, improved the number of tillers and pre-anthesis N translocation in various organs of wheat and post-anthesis N accumulation, eventually increased the yield up to 17-36%. Delaying sowing time had reduced the soil water storage at sowing and winter accumulated temperature by about 180˚C. The contribution of N translocation to grain yield was maximum in glume+spike followed by in leaves and minimum by stem+sheath. In addition a close relationship was found between the N accumulation and translocation and the soil moisture in the 20-300 cm. Subsoiling during the fallow period and the medium sowing date was beneficial for improving the soil water storage and increased the N translocation to grain, thereby increasing the yield of wheat, especially in dry year.

A typical river-connected lake, Jinshan Lake, was selected as the study area. By the combination of field experiment, laboratory experiment and mathematical model, we plotted the relationship between the concentration of DCu-SCu and FDI, and constructed the mathematical model of the migration and transformation of HMCu in Jinshan Lake. We choose a typical diurnal tide to simulate and revealed the vertical migration characteristics of HMCu in Jinshan Lake during a diurnal tide. The results show that: (1) The release rate of DCu was proportional to FDI and background content, respectively. (2) Due to the nearby industrial enterprises and terrain characteristics, SA loads the most HMCu, the average concentration is 70.07mg/kg. According to the characteristics and geographical location of LC, the concentration of copper in the two states fluctuates greatly (DCu: 43.20~74.77 mg/kg, SCu: 53.63~74.67mg/kg). The fluctuation trend of SCu in ZA is significantly different from that in other areas, which mainly due to the complex hydraulic distribution and the sorption-desorption process of HMs in sediment particles. The hydraulic disturbance of JG is the least and relatively stable, which is the farthest from the inlet of the lake and is the least affected by the Yangtze river. (3) The FDI in a diurnal tide reaches the suspension condition of fine sediment particles in each region. FDI and sediment concentration on the vertical exchange of two - state Cu is significant.

Constructed rapid infiltration system (CRI) is a new type of sewage biofilm treatment technology, but due to its anaerobic zone lacks of the carbon sources and the condition for nitrate retention, its nitrogen removal perfomance is very poor; However, shortcut nitrification-denitrification process presents distinctive advantages, as it saves oxygen, requires less organic matter and needs less time for denitrification compared to conventional nitrogen removal method. Thus, if the shortcut nitrification-denitrification process could be applied to CRI system properly, the simpler, more economic and efficient nitrogen removal method will be obtained. But, as its reaction process shows that the first and the most important step of achieving shortcut nitrification-denitrification is to achieve shortcut nitrification. Thus, in this study, we explored the feasibility to achieve shortcut nitrification, which produces nitrite as the dominant nitrogen species in effluent, by addition of potassium chlorate (KClO₃) to the influent. In an experimental CRI model system, the effects on nitrogen removal, nitrate inhibition and nitrite accumulation were studied, and the advantages of achieving shortcut nitrification-denitrification were also analysed. The results showed that shortcut nitrification was successfully achieved and maintained in a CRI system by adding 5 mM KClO₃ to the influent at a constant pH of 8.4. Under these conditions nitrite accumulation rate was increased, while a lower concentration of 3 mM KClO₃ had no obvious effect. The addition of 5 mM KClO₃ in influent presumably allowed sufficient activity of ammonia-oxidizing bacteria (AOB) but inhibited nitrite-oxidizing bacteria (NOB) strongly enough to result in a maximum nitrite accumulation rate of up to over 80%. As a result, nitrite became the dominant nitrogen product in the effluent. Moreover, if the shortcut denitrification will be achieved in the subsequent research, it could save 60.27 mg carbon source (CH₃OH) consumption when treatment of per liter sewage in CRI system compared with full denitrification process.

The excessive vibration caused by crowds walking across footbridges has attracted great public concerns in the past few decades. This paper presents, from considering the dynamic characteristics of the bipedal crowd model, a new stability limit criterion based on the bipedal excitation model. The stability limit can be used to estimate the upper boundary of crowd size. In addition, the dynamic stable performances of a structure, under a certain walking crowd size, can be predicted by the stability criterion. This proposed mechanism provides an alternative comprehension how crowd excite the excessive sway motion with a large-span structure.

Postpartum depression (PPD) can interfere with the establishment of affective bonds between infant and mother, which is important for the cognitive, social-emotional, and physical development of the child. Rates of PPD have increased during the COVID-19 pandemic, likely due to the added stress and limited support available to new parents. The present study examined whether parenting-related stress, perceived bonding impairments, quality of observed mother-infant interactions and salivary oxytocin levels differ between depressed and non-depressed mothers, along with differential impacts of COVID-19 on depressed mothers. Participants included 70 mothers (45 depressed, 25 controls) with infants aged 2-6 months. All data were collected remotely to ease participant burden during the pandemic. Depression was associated with experiences of heightened parenting-related stress and bonding difficulties. These differences were not observed during mother-infant interactions or in salivary oxytocin levels. Differences in COVID-related experiences were minimal, though depressed mothers rated slightly higher stress associated with returning to work and financial impacts of the pandemic. Findings highlight the importance of early intervention for PPD to mitigate long-term effects on mothers, children, and families. Additionally, they underscore the need for an early intervention to support the developing mother-infant dyad relationship during this crucial time.

This paper is primarily focused on the robust control of an inverted pendulum system based on the policy iteration in reinforcement learning. First, a mathematical model of the single inverted pendulum system is established through a force analysis of the pendulum and trolley. Second, based on the theory of robust optimal control, the robust control of the uncertain linear inverted pendulum system is transformed into an optimal control problem with an appropriate performance index. Moreover, for the uncertain linear and nonlinear systems, two reinforcement-learning control algorithms are proposed using the policy iteration method. Finally, two numerical examples are provided to validate the reinforcement learning algorithms for the robust control of the inverted pendulum systems.

In order to alleviate the conflict between populations and land-resource, Tianjin has adopted multi-phase reclamation projects to formed large-scale artificial reclamation land. However, the reclamation areas are susceptible to subsidence, which demonstrate a serious threat to infrastructure and people’s lives and property. The SBAS-InSAR was used to acquired surface deformation of Tianjin Binhai New Area from January 2017 year to December 2022 year, analyzed in depth the response relationship between land subsidence and reclamation projects time as well as the land use type. The results show that the Lingang Industrial Zone was the earliest to be reclaimed, with extensive reclamation completed by 2016 year, while Nangang Industrial Zone and Hangu Port started reclamation projects in 2009 year, some areas are still currently under construction. There is a strong correlation between surface deformation and reclamation time, the severe land subsidence occurred over newly reclaimed areas. Surface deformation gradually intensifies from west to east, the maximum surface settlement in Nangang Industrial Zone, Lingang Industrial Zone from the west to the east has changed from -50 mm to -890 mm,45 mm to -580 mm, respectively, reclamation area of Hangu Port with maximum surface deformation is -250 mm. Significant differences deformation among different land use types, which reclamation projects completed in the same time. Subsidence is positively correlated with surface load, in areas with higher surface loads, the surface settlement is also severer,the average surface settlement for the heavy shipyard, 67 grain storage tanks, 27 grain storage tanks, road, and bare land are -201 mm, -166 mm, -107 mm, -64 mm, and -43 mm, respectively. This study reveals significant differences of surface deformation in the reclamation completed at different times and the load is the main driving factor of settlement difference in the reclamation land completed at the same time. Which has important guiding significance for preventing and controlling geological disasters in the reclamation area and later development planning.

The coastal zone, situated at the sensitive interface between land and sea, serves as a pivotal area of extensive human economic activities. As one of China's economic special zones, Xiamen exemplifies the comprehensive trajectory of coastal governance in China. This research adopts an interdisciplinary approach grounded in historical geography and political ecology, employing data collection methods encompassing historical literature, field surveys, and interviews. The research findings indicate that:(1) The year 1994 witnessed the pivotal role played by the United Nations Convention on the Law of the Sea (UNCLOS) in connecting Jimei Peninsula from a local context to the international arena, thus signifying a momentous turning point in the process of scale reconstruction. However, the subsequent implementation of the Coastal Exclusion Policy in 2002 had detrimental consequences, leading to the disintegration of the local scale, the erosion of maritime culture, and the disregard for the livelihood security of displaced coastal populations.(2)The Coastal Exclusion Policy serves as an instrumental tool for implementing scale politics, while its functional realignment has had profound implications for the coastal zone, encompassing economic transformation, ecological degradation, and the marginalization of the socio-cultural fabric that intertwines humans and the coastal environment.

Barnyardgrass (Echinochloa spp.) is a prevalent type of weed in rice fields worldwide. Despite the growing knowledge concerning allelopathic interference with barnyardgrass, little is understood regarding the competitive mechanisms between allelopathic rice and herbicide-resistant barnyardgrass at the plant physiological level. In this context, a hydroponic system was employed to investigate the root morphological traits and different phytohormones levels of two rice cultivars, i.e., the allelopathic rice cultivar “PI312777” (PI) and the non-allelopathic rice cultivar “Lemont” (LE), when co-planted with quinclorac-resistant and -susceptible barnyardgrass, respectively. The results showed that the shoot and root biomass were greater in the allelopathic rice cultivar. Moreover, the treatments at the two time points induced an increase in shoot and root biomass of PI when subjected to barnyardgrass stress. In terms of root morphology, PI exhibited significantly higher fine-root length in diameters &lt;0.5 mm, a greater number of root tips, and longer root tips compared to LE. In addition, the levels of different plant hormones, including auxin (IAA), abscisic acid (ABA), jasmonic acid (JA), and salicylic acid (SA), known for their diverse adaptation strategies to biotic stress, were analysed. The response to quinclorac-resistant barnyardgrass stress was consistent in terms of the content of well-known stress-related hormones, namely SA and JA. The accumulation of SA and JA was observed in both rice cultivars under the stress of quinclorac-resistant barnyardgrass, with higher contents of these hormones in PI than that in LE. The most significant change was observed in IAA and ABA contents in rice, which decreased significantly from 7 days to 14 days under co-culture stress. Additionally, PI contained higher levels of IAA and ABA than LE in the presence of barnyardgrass stress. This research may aid in the development of strategies for reducing the environmental impact of herbicides through the prudent selection of non-chemical herbicide control tactics.

There has been no significant efficacy in treatment for osteosarcoma (OS) metastasis after nearly four decades of trials. This motivates us to elucidate OS therapies according to their four bidirectional mutation stages. To refresh the OS therapy status quo, the historical developments and clinical advancements are briefly described. However, the main issue of metastasis remains unresolved, accounting for 90% of pulmonary metastasis deaths. Thus, this metastasis problem is related to immune evasion and chemoresistance that are being induced after long-term treatment by the use of immunotherapy for tumorigenesis. Therefore, it is rationale to discuss the relationship cycles of mutation stages including tumorigenesis, metastasis, immune evasion, and chemoresistance. Even though many combinational and targeted therapies have been developed to intensify these mutation treatments, successful clinical translations with higher cure rates are still rare. Through this review, an in-depth understanding of the bidirectional relationship between the four OS mutation stages and their respective therapies is provided. Herein, we summarise the medicines used to treat tumorigenesis, including COLGALT2 inhibitors, Tra2B, and AGAP1, miR-148a and miR-21-5p EVs, and the lncRNA LIFR-AS1. Following the medicines used to treat metastasis are AXL, miR-135a-5p, mRNA BCL6, TGFβ1, Tim-3, SOCS5, CASC15, KLF3-AS1, PDCD4, ATG5, and Rab22a-NeoF1. Then the medicines used to treat immune evasion are N-cadherin, anti-IL-9, USP12 inhibitor, IgG-4+ B-cells, LAP inhibitor, anti-Wnt2 mAb, anti-αvβ8 integrin, HK2-mediated IκBα, IDO inhibitor with NO, and TGF-βRII with anti-IgG1. Finally, the medicines used to treat chemoresistance are DHFR, FPGS, HSP-90AA1, XCT-790, ATKI, and IGF1. As a result, this contribution is expected to serve as a reference and guide for scientists and clinicians.

We live in extraordinary times, where COVID-19 pandemic has brought the whole world to a screeching halt. Tensions and contradictions that surround the pandemic ridden world include the availability, and the lack thereof, various facial protection measures to mitigate the viral spread. Here, we comprehensively explore the different type of facial protection measures, including masks, needed both for the pubic and the health care workers (HCW). We discuss the anatomy, the critical issues of disinfection and reusability of masks, the alternative equipment available for the protection of the facial region from airborne diseases, such as face shields and powered air purifying respirators (PAPR), and the skin-health impact of prolonged wearing of facial protection by HCW. Clearly, facial protection, either in the form of masks or alternates, appears to have mitigated the pandemic as seen from the minimal COVID-19 spread in countries where public mask wearing is strictly enforced. On the contrary, the healthcare systems, that appear to have been unprepared for emergencies of this nature, should be appropriately geared to handle the imbalance of supply and demand of personal protective equipment including face masks. These are two crucial lessons we can learn from this tragic experience.

The pile foundation in the permafrost region is in a negative temperature environment, so the concrete is affected by the negative temperature of the surrounding soil.It not only affects the formation of concrete strength, but also leads to engineering quality accidents in serious cases.Based on the actual measurement of temperature at different strata depths and the comprehensive consideration of surface temperature, terrestrial heat flux and other parameters, the law curve of temperature change along depth in Greater Khingan is established.The calculated results of the curve are consistent with the measured results of ground temperature.The results show that the variation trend of ground temperature along the strata depth at different monitoring sites is basically the same. From June to November, the ground temperature at different depths tends to be constant.From December to May, the ground temperature at any depth within the depth range of 0 to 5.5m follows the law of the cosine function.Below 5.5m, the earth temperature no longer varies with depth.The research results can be used as reference for pile foundation construction under negative temperature environment.

In recent years, nocturnal ozone enhancement(NOE) events have become a hot research topic in the field of atmospheric environment. By using statistically-based data analysis, we made a comparative investigation about nocturnal ozone concentrations and NOE events in 2022 and 2023, and further explored the effects of NOE events on O3 and PM2.5 at the night of the same day and the next day. The results showed that from 2022 to 2023 in Dongying, the annual average nocturnal ozone concentrations increased from 51 μg/m3 to 59 μg/m3, and the frequency of NOE events was higher in spring, summer and autumn, and lower in winter. NOE events not only had an obvious promoting effect on nocturnal O3 and Ox, and the daily maximum 8 h average concentration of O3 (MDA8-O3) of the same day (more apparent in summer and autumn), and nocturnal PM2.5 and PM2.5-bounded NO3- and SO42- (more apparent in winter), but also had a distinct influence on O3, Ox and MDA8-O3 of the next day (more apparent in summer). The results could strengthen the understanding of the phenomena of NOE events, and provide a scientific basis for the collaborative control of PM2.5 and ozone in urban areas in the Yellow River Delta, China.

There are many theories of carcinogenesis arguing against the orthodox mutation theory, debating on such as “epigenetic alteration” that is inheritable and yet, theoretically, reversible. Our integrated theory describes that any extracellular, intracellular, or intranuclear stressors, mutagenic or not, can initiate a lengthy tumorigenesis to engender a benign or malignant tumor, but the aberrations directly establishing cellular immortality and autonomy may be epigenetic or genetic alterations in the genomic DNA. A neoplasm is considered a semi-new organism with autonomy; it therefore should have genetic mutations to be “new”. We may be able to direct cancer cells towards differentiation as a remedy, because the extracellular milieu may control the phenotype of a cell and the tissue or organ made of the cell’s progenies, and the cytoplasm of a cell may override the nucleus in the phenotypic control. However, the nucleus retains the capacity to manifest itself if allowed by the microenvironment, which then allows the already reversed cells to revert back to tumor cells again. Neoplasms are malignant if they bear epigenetic or genetic anomalies in mutator genes defined as those whose alterations allow or accelerate alterations to occur in other genes, whereas neoplasms are benign if they bear epigenetic or genetic aberrations only in non-mutator genes. It is imperative to identify the immediate tumor-causing cellular alterations defined as those directly responsible for immortality and autonomy, and for treatment purposes to identify the extracellular and intracellular factors that control the phenotype of cancer cells.

With the trend of public infrastructure becoming more sustainable, large multi-purpose sports venues (LMPSVs) have become one of the world's most complex architectural projects and one of the landmark buildings of an international city. LMPSVs will lead the world in sustainable design, construction and operational innovations, and play a crucial role in raising awareness of sustainability around the world. System Thinking (ST), System Dynamics (SD) and Sustainable System Development (SSD) theories are three interrelated concepts that together form a methodological framework for solving complex system problems and driving strategies. The purpose of this study is to examine how LMPSVs can implement environmental, social, governance, and innovation (ESGI) enterprise transformation strategy (ETS) based on a sustainable systems development (SSD) framework. In view of the current global environmental challenges and social responsibility requirements, the motivation of this study is to provide an integrated transformation pathway for LMPSVs to achieve the goal of sustainable development and to contribute to the field of related disciplines. The methodology of this research adopts a combination of literature review and case study analysis, and the theoretical basis is mainly drawn from cutting-edge research in the fields of sustainable development, corporate social responsibility (CSR) and environmental management. Then, by analyzing successful transformation cases in China, we extract data and information to explore the application and effectiveness of these strategies in practice. The results of the study show that by implementing ESGI-based transformation strategy, LMPSVs can not only make significant progress in terms of environmental protection, social responsibility, and governance structure, but also drive long-term corporate growth and competitiveness through innovation. Specifically, these results are realized in terms of increased efficiency in energy use, improved waste management, community involvement and increased stakeholder satisfaction. The study concludes by emphasizing that the SSD-based ESGI Transformation Strategic framework provides a sustainable pathway for LMPSVs. In the future, the extension of this transformation strategy will help a wider range of industry sectors to achieve sustainable development goals, and has wide application potential and far-reaching social significance.

Xanthogranulomatous orchitis is a chronic, non-neoplastic inflammation that is quite rare. In this paper, we discuss the case of a 79-year-old male patient who presented with bilateral scrotum swelling and dysuria that persisted for two weeks. Despite two weeks of anti-infection treatment, the patient's symptoms persisted, leading to a decision to perform transurethral prostate resection and bilateral orchiectomy after careful consideration. After the surgery, the postoperative pathology indicated that the patient had xanthogranulomatous orchitis on the left side and acute positive orchitis with hemorrhage on the right side. Fortunately, three months after the procedure, the patient experienced no negative events and was pleased with the postoperative results.

As the world faces unprecedented environmental challenges and the rapid advancements of artificial intelligence (AI), it is crucial for universities to adapt their chemistry education to remain relevant and contribute to sustainability and the United Nations' Sustainable Development Goals (SDGs). This report offers critical insights into the development of university chemistry education over the next 10-20 years, forecasts its development over the next 10-20 years, and offers recommendations for the Ministry of Education and universities to ensure the continued relevance of chemistry programs in the face of AI.

Infrared sensors incorporating suspended zinc oxide (ZnO) pyroelectric films and thermally-insulated silicon substrates are fabricated using conventional MEMS-based thin-film deposition, photolithography, and etching techniques. The responsivity of the pyroelectric film is improved through annealing at 500℃ for 4 h. The voltage response of the fabricated sensors is evaluated experimentally for a substrate thickness of 1 µm over a sensing range of 30 cm. The results show that the voltage signal varies as an inverse exponential function of the distance. A positioning system based on three infrared sensors is implemented in LabVIEW. It is shown that the position estimates obtained using the proposed system are in excellent agreement with the actual locations. In general, the results presented in this study provide a useful source of reference for the further development of MEMS-based pyroelectric infrared sensors.

Three new species of the Sequester group of Pteromalus (Habrocytus) (Hymenoptera: Pteromalidae: Pteromalinae), Pteromalus (Habrocytus) boleensis Yan et Li sp. nov., Pteromalus (Habrocytus) longepedicelus Yan et Li sp. nov., and Pteromalus (Habrocytus) robustus Yan et Li sp. nov. are described and illustrated based on adult morphology and molecular data from Xinjiang, China. The DNA barcodes (ITS2) of Pteromalus (Habrocytus) boleensis sp. nov. and Pteromalus (Habrocytus) robustus sp. nov. have been generated and compared with all existing sequences of the Sequester species group. The results of morphological taxonomy and molecular identification are consistent. A key to all known species of the Sequester group in the world is provided.

Translation is spatiotemporally regulated and ER-associated mRNAs are generally in efficient translation. It is unclear whether the ER-associated mRNAs are deadenylated or degraded on the ER surface in situ or in the cytosol. Here, we showed that ER possessed active deadenylases, particularly the poly(A)-specific ribonuclease (PARN), in common cell lines and mouse tissues. Consistently, purified recombinant PARN exhibited a strong ability to insert into the Langmuir monolayer and liposome. ER-anchored PARN was found to be able to reshape the poly(A) length profile of the ER-associated RNAs by suppressing long poly(A) tails without significantly influencing the cytosolic RNAs. The shortening of long poly(A) tails did not affect global translation efficiency, suggesting that the non-specific action of PARN towards long poly(A) tails was beyond the scope of translation regulation on the ER surface. Transcriptome sequencing analysis indicated that the ER-anchored PARN trigged the degradation of a small subset of ER-enriched transcripts. The ER-anchored PARN modulated the translation of its targets by redistributing ribosomes to heavy polysomes, suggesting that PARN may play a role in dynamic ribosome reallocation. During DNA damage response, MK2 phosphorylated PARN-Ser557 to modulate PARN translocation from the ER to cytosol. By promoting the decay of ER-associated MDM2 transcripts with low ribosome occupancy, the ER-anchored PARN modulated DNA damage response and thereby cell viability. These findings revealed that a highly regulated communication between mRNA degradation rate and translation efficiency is present on the ER surface in situ and that PARN may contribute to this communication by modulating the dynamic ribosome reallocation between transcripts with low and high ribosome occupancies.

Hepatocellular carcinoma (HCC) is the fifth most common type of cancer, and is the third leading cause of cancer-related deaths each year. It involves a multi-step progression and is strongly associated with chronic inflammation induced by the intake of environmental toxins and/or viral infections (i.e., hepatitis B and C viruses). Although several genetic dysregulations are considered to be involved in disease progression, the detailed regulatory mechanisms are not well defined. Homeobox (Hox) genes that encode transcription factors with homeodomains control cell growth, differentiation, and morphogenesis in embryonic development. Recently, more aberrant expressions of Hox genes were found in a wide variety of human cancer, including HCC. In this review, we summarize the currently available evidence related to the role of Hox genes in the development of HCC. The objective is to determine the roles of this conserved transcription factor family and its potential use as a therapeutic target in future investigations.

The era of Internet of Things (IoT) has begun to evolve and with this the devices around us are getting more and more connected. Vehicular Ad-hoc NETworks (VANETs) is one of the applications of IoT. VANET allow vehicles within these networks to communicate effectively with each another. VANETs can provide an extensive range of applications that support and enhance passenger safety and comfort. It is important that VANETs are applied within a safe and reliable network topology; however, the challenging nature of reaching reliable and trustworthy agreement in such distributed systems is one of the most important issues in designing a fault-tolerant system. Therefore, protocols are required so that systems can still be correctly executed, reaching agreement on the same values in a distributed system, even if certain components in the system fail. In this study, the agreement problem is revisited in a VANET with multiple damages. The proposed protocol allows all fault-free nodes (vehicles) to reach agreement with minimal rounds of message exchanges, and tolerates the maximal number of allowable faulty components in the VANET.

Due to the fact that abrasive media can deform flexibly in abrasive flow machining (AFM) making this method easily to polish the complex holes and the curved surface of the hard machining shapes. Although abrasive media dominate the polishing behavior in AFM process, the mechanism of the abrasive media are not easy to understand because of the high viscous gels, therefore, many finishing works need lots of time to design AFM process. Power laws of the abrasive gels is studied here to evaluate the non-Newtonian flow of abrasive gels in complex holes polishing firstly, at the mean time different abrasive gels are utilized to finish the complex holes to follow the results by non-Newtonian flow calculation. Moreover, traditional AFM has difficulty to achieve a uniform roughness of radial distribution in the complex holes polishing because of the non-uniform abrasive forces. So a helical passageway is proposed to create a multiple motion of abrasive medium and to obtain the even surface of the complex holes in AFM process.

We study L_2-approximation problems in the weighted Hilbert spaces in the worst case setting. Three interesting weighted Hilbert spaces appear in this paper, whose weights are equipped with two positive parameters $\ga_j$ and $\az_j$ for $j=1,\,2,\dots,\,d$. We consider the worst case error of algorithms that use finitely many arbitrary continuous linear functionals. We discuss the exponential convergence-(t,s)-weak tractability (EC-(t,s)-WT) of these L_2-approximation problems under the absolute or normalized error criterion. In particular, we obtain the sufficient and necessary conditions for EC-(1,1)-WT and EC-(t,1)-WT with t

In this study, we investigated the effects of three surface treatment techniques on 316L stainless steel, low-temperature immersion corrosion, shot peening followed by immersion corrosion, and electrochemical corrosion. Surface alterations were analyzed using scanning electron microscopy, Raman spectroscopy, and α-step thin-film thickness profiling. Human osteoblast adhesion was evaluated using Liu’s stain and metallographic optical microscopy. The results revealed weak cell adhesion after low-temperature immersion and shot peening followed by immersion corrosion. By contrast, electrochemical corrosion, particularly with a high current density and low corrosive solution concentration, resulted in a uniformly corroded surface, thus promoting dense cell adhesion. All three techniques resulted in porous oxide layers. Overall, our experimental findings highlighted shot peening (1 kg/cm2 for 20 s) and electrochemical corrosion (0.5 M HCl) as effective processes. Electrochemical corrosion produced uniformly dense corrosion pits, whereas shot peening produced semicircular grooves with small corrosion pits, both favorable for cell adhesion. Electrochemical corrosion also yielded excellent cell adhesion, emphasizing its suitability for biomedical activity. We developed a process for creating a porous surface layer and thereby enhancing the cell adhesion to 316L stainless steel for potential biomedical implant applications.

Previous research has shown that the effectiveness of selecting filter set from a large set of commercial broadband filters by vector analyzing method based on maximum linear independence (MLI). However, the traditional MLI is suboptimal due to predefining the first filter of the selected filter set being the maximum ℓ2 norm among all those of the filters. An exhaustive imaging simulation is conducted to investigate the features of the most competent filter set. In the simulation, every filter in a subset of all the filters is selected serving as the first filter in turn. From the results of the simulation, we found there are remarkable characteristics for the most competent filter set. Besides smaller condition number, the geometric features of the best-performed filter set comprise the distinct peak of the transmittance of the first filter, the generally uniform distributing of the peaks of the transmittance curve of the filters, the substantial overlapping of the transmittance curves with those of the adjacent filer sets. Therefore, the best-performed filter sets can be decided intuitively by simple vector analyzing and just a few experimental verifications. This work would be useful for optimizing spectral sensitivity of broadband multispectral imaging sensors or SFA sensors.

Spermatogonial stem cells (SSCs) are the only primitive spermatogonial cells in males that can naturally transmit genetic information to their offspring and replicate throughout their lives. Phospholipase D family member 6 (PLD6) has recently been found to be a surface marker for SSCs in mice and boars; however, it has not been validated in cattle. The results of RT-PCR and qRT-PCR found that the relative expression of PLD6 gene in the testicular tissues of 2-year-old Simmental calves was significantly higher than that of 6-month-old calves. Immunofluorescent staining further verified the expression of PLD6 protein in bovine spermatogenic cells like germ cell marker VASA. Based on multiple bioinformatic databases, PLD6 is a conservative protein which has high homology with mouse Q5SWZ9 protein. It is closely involved in the normal functioning of the reproductive system. Molecular dynamics simulation analyzed the binding of PLD6 as a phospholipase to cardiolipin (CL), and PLD6-CL complex showed high stability. The protein interaction network analysis showed that there is a significant relationship between PLD6 and piRNA binding protein. PLD6 acts as an endonuclease and participates in piRNA production. In addition, PLD6 in bovine and mouse testes has a similar expression pattern with the spermatogonium-related genes VASA and PIWIL2. In conclusion, these analyses imply that PLD6 has a relatively high expression in bovine testes and could be used as a biomarker for spermatogenic cells including SSCs.

Nitrogen (N) strongly affects plant growth and metabolism. For shikonin biosynthesis, although the ammonium toxicity phenomenon has been reported, the effects of nitrogen on the shikonin synthesis remains obscure. In this study, we carried out four different concentrations of NH4+ treatments on Arnebia euchroma hairy roots (AEHR) to clarify the influence of NH4+ on the growth and shikonin accumulation in A. euchroma and the possible mechanism. The results showed that compared with the 0% NH4+ treatment (only nitrate as nitrogen source), 10% NH4+ treatment increased the fresh weight and the dry weight of AEHR, and promoted the synthesis of shikonins; 20% NH4+ treatment started to show the inhibition effects on growth and shikonin accumulation of AEHR and 30% NH4+ treatment exhibited the strongest inhibition effects. With increased percentage of NH4+, AEHRs became shorter and thicker with more branches. To further elucidate the mechanism, we analyzed the time-course of nitrogen assimilation, gene expression level of key enzymes involved in the shikonin biosynthesis pathway, and contents of various endogenous hormones under NH4+ toxicity condition. Results indicated that auxin and cytokinin might regulate the growth and architecture of AEHR under NH4+ toxicity, and jasmonate level was reduced along with the inhibition of shikonin biosynthesis. This first comprehensive investigation into the effects of ammonium/nitrate ratio on shikonin biosynthesis not only provided valuable data for optimizing the in vitro culture and shikonin production in A. euchroma, but also suggested potential fertilizer strategies for its cultivation.

Glaciation and mountain orogeny have generated new ecologic opportunities for plants, favoring an increase in the speciation rate. Moreover, they also act as corridors or barriers for plant lineages and populations. High genetic diversity ensures that species are able to survive and adapt. Gene flow is one of the most important determinants of the genetic diversity and structure of out-crossed species, and it is easily affected by biotic and abiotic factors. The aim of this study was to characterize the genetic diversity and structure of an alpine species, Festuca ovina L., in Xingjiang, China. A total of 100 individuals from 10 populations were analyzed using six amplified fragment length polymorphism (AFLP) primer pairs. A total of 583 clear bands were generated, of which 392 were polymorphic; thus, the percentage of polymorphic bands (PPB) was 67.24%. The total and average genetic diversities were 0.2722 and 0.2006 (0.1686-0.2225), respectively. The unweighted group method with arithmetic mean (UPGMA) tree, principal coordinates analysis (PCoA) and STRUCTURE analyses revealed that these populations or individuals could be clustered into two groups. The analysis of molecular variance analysis (AMOVA) suggested that most of the genetic variance existed within a population, and the genetic differentiation (Fst) among populations was 20.71%. The Shannon differentiation coefficient (G’st) among populations was 0.2350. Limited gene flow (Nm = 0.9571) was detected across all sampling sites. The Fst and Nm presented at different levels under the genetic barriers due to fragmentation. The population genetic diversity was significant relative to environmental factors such as temperature, altitude and precipitation.

Puerarin (PUE) is a compound isolated from the roots of Pueraria lobata. We studied the pharmacokinetics and tissue distribution kinetics of PUE in Sprague-Dawley rats following intraperitoneal administration of three concentrations. Indirect competitive ELISA based on an anti-PUE monoclonal antibody was used to determine the concentration of PUE in the blood, heart, liver, spleen, lung, kidney, hippocampus, cerebral cortex, and striatum. The plasma and tissue distribution kinetic characteristics following a single injection of PUE (20, 40, and 80 mg/kg) were calculated using a non-compartment model. In the high-dose (80 mg/kg) and medium-dose (40 mg/kg) groups, the kinetic profile of PUE in blood and kidney samples showed two absorption peaks, while that of the other tissues showed only one peak. In the low-dose (20 mg/kg) group, there was only one peak, irrespective of the sample type. Pharmacokinetic parameters such as the area under the curve, C_max, and T_max varied according to the administered dose. AUC and C_max values increased dose-dependently. PUE was widely distributed in areas of the brain such as the hippocampus, cerebral cortex, and striatum, providing a foundation for guiding the use of PUE in the treatment of cerebral ischaemic stroke and neurodegenerative diseases.

Genome-wide association studies (GWAS) have successfully revealed many disease-associated genetic variants. For a case-control study, the adequate power of an association test can be achieved with a large sample size, although genotyping large samples is expensive. A cost‐effective strategy to boost power is to integrate external control samples with publicly available genotyped data. However, the naïve integration of external controls may inflate the type I error rates if ignoring the systematic differences (batch effect) between studies, such as the differences in sequencing platforms, genotype calling procedures, population stratification, and so forth. To account for the batch effect, we propose an approach by integrating External Controls into the Association Test by Regression Calibration (iECAT-RC) in case-control association studies. Extensive simulation studies show that iECAT-RC not only can control type I error rates but also can boost statistical power in all models. We also apply iECAT-RC to the UK Biobank data for M72 Fibroblastic disorders by considering genotype calling as the batch effect. Four SNPs associated with Fibroblastic disorders have been detected by iECAT-RC and the other two comparison methods. However, our method has a higher probability of identifying these significant SNPs in the scenario of an unbalanced case-control association study.

The service life of the reinforced concrete structure in the marine environment can be impaired significantly due to chloride-induced corrosion. However, how the chloride diffusion in pre-cracked concrete structures is affected by the hydrostatic pressure magnitude is poorly understood. This study experimentally examined the effect of hydrostatic pressure on the chloride diffusion in pre-cracked concrete. Cracks with five different widths, i.e., 20 μm, 40 μm, 60 μm, 80 μm, and 100 μm, were manually created using a splitting tensile apparatus respectively. The chloride diffusion in the concrete with a certain crack was then studied under four different hydrostatic pressures of 0 MPa, 0.1 MPa, 0.3 MPa, and 0.5 MPa. Experimental results show that the chloride diffusion in concrete with a crack greatly relies on both the hydrostatic pressure and the crack width. The chloride concentration increases as the hydrostatic pressure grows, particularly for the wider cracks with width ranging from 60 μm to 100 μm. Surprisingly, the hydrostatic pressure has a negligible effect on the chloride distribution in the concrete with a crack width no larger than 40 μm. Both the chloride diffusion coefficient and the surface chloride concentration of concrete increased gradually as the hydrostatic pressure increased. The experimental findings enrich our understanding of the behavior of pre-cracked concrete when exposed to chloride-induced corrosion at different depths of marine environments.

This study investigates the microstructures and deformation mechanism of hetero-structured pure titanium under different high strain rates (500 s-1，1000 s-1，2000 s-1). The influence of strain rate on the deformation mechanism is examined. As the strain rate increases, the dominance of dislocation slip decreases while deformation twinning becomes more prominent. Notably, at a strain rate of 2000s-1, nanoscale twin lamellae are activated within grain with a size of 500nm, which is a rarely observed phenomenon in pure Ti. Additionally, martensitic phase transformation is also identified. These findings can greatly enhance our understanding of the mechanical responses of Ti and broaden the potential applications of Ti in dynamic deformation scenarios.

Crop residue burning produces a lot of polluting gases and fine particles, endangering human health, damaging soil structure, and causing fire accidents. In addition to the impact of residue burning on the local environment, pollutants can spread with the wind to more distant areas and impact the air quality of surrounding areas, especially cities. Nevertheless, a comparative analysis of the impact of two common residue burning parameters, the number of residue fire points and residue burned area, on urban air quality indicators has not been reported. In this study, the correlation between these two different residue burning parameters on air quality in Daqing City was investigated comparatively using the Visible Infrared Imaging Radiometer Suite (VIIRS) fire point product, the Moderate-resolution Imaging Spectroradiometer (MODIS) burned area product, and buffer zone analysis. The association between MODIS burned area products and air quality index (AQI) was found to be around 0.8, with a maximum of 0.816 at a buffer zone radius of 50 km. Meanwhile, it was found that the correlation between the number of residue fire points extracted from the VIIRS active fire products and air quality was above 0.6, again with a maximum of 0.745 at a buffer radius of 50 km. Within other levels of buffer zones, the correlation between residue burned area and AQI was consistently higher than that between residue fire points and AQI. By comparing the correlation between VIIRS fire points, MODIS burned area, and AQI with the concentration of each pollutant, we found that the correlation between residue burned area and AQI and the concentration of each pollutant is higher. MODIS burned area monitoring, on the other hand, detects changes in the time series of images taken by satellite at two transit moments to obtain the new burned area and cumulative burned area during this period, allowing the monitoring of fire traces caused by fire points at non-transit moments. From analyzing the correlation between residue fire points, residue burned area, and the concentration of each pollutant (PM2.5, PM10, CO, NO2, SO2, O3), we found significant correlations between residue burning and PM2.5, PM10, CO, and NO2 concentrations, with the highest correlation (R2) of 0.81 for PM2.5. Moreover, the correlation between residue burned area and PM2.5, PM10, CO, and NO2 concentrations was significantly higher than that between the number of residue fire points and their concentrations.

Direct femtosecond laser writing or inscription is a useful technique, and it has been 1 employed to engineer various materials in many applications including nonlinear photonic crystals, 2 which are of periodically patterned second-order nonlinearity to get and control the coherent light at 3 new frequencies. By manipulation of second-order nonlinearity, either erased or poled, quasi-phase 4 matching has been achieved in several crystals, especially three-dimensional nonlinear photonic 5 crystals have been originally proposed and proved to be truly three-dimensional. Here we shortly 6 review on the recent advances in the research field of nonlinear photonic crystals inscribed by 7 femtosecond laser. We also discuss some phenomena that not understood yet and the future possible research topics in this field.

Low-dimensional carbon-based (LDC) materials have attracted extensive research attentions in electrocatalysis because of their unique advantages such as structural diversity, low cost, and chemical tolerance. They have been widely used in a broad range of electrochemical reactions to relief environmental pollution and energy crisis. Typical examples include hydrogen evolution reaction (HER), oxygen evolution reaction (OER), oxygen reduction reaction (ORR), carbon dioxide reduction reaction (CO₂RR), and nitrogen reduction reaction (NRR). Traditional “trial and error” strategies seriously slowed down the rational design of electrocatalysts for these important applications. Recent studies show that the combination of density functional theory (DFT) calculations and experimental research is capable of accurately predicting the structures of electrocatalysts, thus could reveal the catalytic mechanisms. Herein, current well-recognized collaboration methods of theory and practice are reviewed. The history of modern DFT, commonly used calculation methods, and basic functionals are briefly summarized. Special attention is paid to descriptors that are widely accepted as a bridge links the structure and activity, and the breakthroughs for high-volume accurate prediction of electrocatalysts. Importantly, correlating multiple descriptors are used to systematically describe the complicated interfacial electrocatalytic processes of LDC catalysts. In addition, machine learning and high-throughput simulations are crucial in assisting the discovery of new multiple descriptors and reaction mechanisms. This review will guide the further development of LDC electrocatalysts for extended applications from the aspect of DFT computations.

The ridge line of the western Pacific subtropical high (WPSHRL) plays an important role in determining the shift of the summer rain belt in eastern China. In this study, we developed a forecast system for the June WPSHRL index based on the latest autumn and winter sea surface temperature (SST). Considering the adverse condition of the small observed sample size, a very simple neural network (NN) model was selected to extract the non-linear relationship between input predictors (SST) and target predictands (WPSHRL) in the forecast system. In addition, some techniques are used to deal with the adverse condition, enhance the stabilization of forecast skills, and analyze the interpretability of the forecast system. The forecast experiments show that the linear correlation coefficient between the predictions from the forecast system and their corresponding observations is around 0.6, and about three-fifths of the observed abnormal years (the years with an obviously high or low WPSHRL index) are successfully predicted. Furthermore, sensitivity experiments show that the forecast system is relatively stable in terms of forecast skill. The above evaluations suggest that the forecast system is valuable in a real application sense.

Based on the two-node Euler-Bernoulli beam, the tower system is discretized by finite element method, and the cubic Hermite polynomial is taken as the shape function of the beam element, and the structural characteristic matrix of the tower system is calculated, and the wind turbine-nacelle-tower multi-degree of freedom is established Finite element numerical model. The aerodynamic load calculation formula for any nacelle attitude angle is deduced. The influence of the vibration feedback of the flexible tower on the aerodynamic load of the wind turbine is studied. The results show that when the rigidity of the tower is large, the impact of tower vibration feedback on the aeroelastic load of the wind turbine is small. For a tower system with greater flexibility, the time-varying feedback of wind-induced vibration will cause greater aeroelastic load changes, especially the overturning moment of the tower top, which will cause a greater impact on the dynamic behavior of the tower in the downwind and crosswind directions. As the flexibility of the tower system increases, the interaction between tower vibration and aerodynamic load is gradually increasing. Taking the impact of the flexible tower on the aeroelastic load of the wind turbine into account, on the one hand, helps to predict the wind more accurately. The aerodynamic load of the wind turbine improves the efficiency of wind energy utilization. On the other hand, it can more accurately analyze the dynamic behavior of the flexible structure of the wind turbine, which is extremely beneficial to the structural optimization design of the wind turbine.

Remote sensing technology provides a new way to explore the earth for geoscience applications. In the context of continuous deepening of geological research and the vigorous development of geospatial information science, 3D geological modeling technology has become a research hotspot in the intersection of earth science and information science. The traditional 3D geological modeling technology refers to underground 3D modeling using geological data. This modeling method can only display the underground scene in 3D visualization, but cannot display the surface in detail. In this study, remote sensing technology is adopted to improve the traditional 3D geological modeling method, so that geological modeling can be integrated with remote sensing image, and a new 3D geological modeling method based on remote sensing technology is developed. This method can perform integrated 3D visualization of underground and aboveground scenes, which provides a new way for disaster prevention and reduction, geological prospecting and tectonic interpretation. The new 3D geological modeling method is mainly applied in the geological field, and has made new progress in multi-source heterogeneous geological data fusion, large-scale high-precision modeling, geological grid subdivision, attribute modeling technology, remote sensing image fusion and other aspects. Taking the Ya'an area as an example, this paper makes use of the new generation of 3D geological modeling technology to carry out 3D geological modeling and visual display. The 3D visualization in Ya'an area verifies the feasibility and effectiveness of the new 3D geological modeling method based on remote sensing technology in the current data environment.

The power converter is the significant device in a wind power system. Wind turbine will be shut down and off grid immediately with the occurrence of the IGBT module open-circuit fault of power converter, which will seriously impact the stability of grid and even threaten personal safety. However, in the existing diagnosis strategies of power converter, there are few single and double IGBT modules open-circuit fault diagnosis methods producing negative results including erroneous judgment, omissive judgment and low accuracy. In this paper, a novel method to diagnose the single and double IGBT modules open-circuit faults of the permanent magnet synchronous generator (PMSG) wind turbine grid-side converter (GSC) is proposed. Above all, collecting the three-phase current varying with wind speed of 22 failure states including a normal state of PMSG wind turbine GSC as the original signal data. Afterward, the original signal data are decomposed by using variational mode decomposition (VMD) to obtain the mode coefficient series, which are analyzed by the proposed method base on fault trend feature for extracting the trend feature vectors. Finally, the trend feature vectors are used as the input of deep belief network (DBN) for decision-making and obtaining the classification results. The simulation and experimental results show that the proposed method can diagnose the single and double IGBT modules open-circuit faults of GSC, and the accuracy is higher than the benchmark models.

Since matter, energy and information are the three major components of the world, is there an interaction between information and matter? In the present work, the coevolution of human language and brain is taken as a case of interaction between information and brain. Some evidence that may show interactions between human language and brain revealed by previous researches is summarized in this paper, such as the language areas in the cerebral cortex of the modern human brain, the evolution of human language and brain in human history, and the genetic basis for the evolution of language. Based on the evidence, a dynamic model is developed to investigate the possible mechanism of coevolution of human language and brain. In the model, human language development and brain development reinforce each other: the developmental level of language can be promoted by advances in brain function due to language-related gene mutations, in turn, whether such mutations are selected positively can be influenced by the current developmental level of language. The coevolution of human language and brain can be taken as a case of interaction between information and matter.

The extensive deployment of wireless infrastructure provides a low-cost way to track mobile users in indoor environment. This paper demonstrates a prototype model of an accurate and reliable room location awareness system in a real public environment, where three typical problems arise. First, a massive number of access points (APs) can be sensed leading to a high-dimensional classification problem. Second, heterogeneous devices record different received signal strength (RSS) levels due to the variations in chip-set and antenna attenuation. Third, APs are not necessarily visible in every scanning cycle leading to missing data. This paper presents a probabilistic Wi-Fi fingerprinting method in a hidden Markov model (HMM) framework for mobile user tracking. Considering the spatial correlation of the signal strengths from multiple APs, a Multivariate Gaussian Mixture Model (MVGMM) is fitted to model the probability distribution of RSS measurements in each cell. Furthermore, the unseen property of invisible AP has been investigated in this research, and demonstrated the efficiency of differentiation between cells. The proposed system is able to achieve comparable localization performance. The filed test results present a reliable 97% localization room level accuracy of multiple mobile users in a real university campus WiFi network without any prior knowledge of the environment.

Health care in Canada is managed by provinces/territories. We investigated regional differences in survival among Canadians diagnosed with central nervous system (CNS) tumours. We identified 50,670 patients diagnosed with a first-ever primary CNS tumour between 2008 and 2017 with follow-up until December 31, 2017. We selected the four highest incidence histologies and used proportional hazards regression to estimate hazard ratios (HRs) for five regions (British Columbia, Prairie provinces, Ontario, Atlantic provinces and the Territories), adjusting for sex, tumour behaviour and patient age. Ontario had the best survival profile for all histologies investigated. The Atlantic provinces had the highest HR for glioblastoma (HR=1.26, 95% CI:1.18-1.35) and malignant glioma not otherwise specified (NOS) (Overall: HR=1.87, 95% CI:1.43-2.43; Pediatric population: HR=2.86, 95% CI:1.28-6.39). For meningioma, the Territories had the highest HR (HR=2.44, 95% CI:1.09-5.45) followed by the Prairie provinces (HR=1.52, 95% CI:1.38-1.67). For malignant unclassified tumours, the highest HRs were in British Columbia (HR=1.45, 95% CI:1.22-1.71) and the Atlantic provinces (HR=1.40, 95% CI:1.13-1.74). There are regional differences in the survival of CNS patients at the population level for all four specific histological types of CNS tumours investigated. Factors contributing to these observed regional survival differences are unknown and warrant further investigation.

Aims: The study aims to take the COVID-19 pandemic as an example to provide a scientific reference for diabetic patients’ self-health management and nurses’ work for these patients when facing future pandemics. Review Methods: It conducted a comprehensive literature search and analysed relevant texts. This article reviews the daily health management of diabetic patients in the context of the COVID-19 pandemic and the role that nurses should play in this process. Results: Diabetic patients face challenges in self-health management during the pandemic, including disruptions in healthcare access, increased mental problems, and unhealthy lifestyles. Nurses serve as the front-line interface between these patients and the healthcare system. Adopting telehealth and remote consultation has effectively bridged the gap created by social distancing measures. Conclusion: Daily self-health management can significantly improve glycemic control and reduce the risk of diabetes-related complications, which is vital during the pandemic when patients may be experiencing disruptions to their routine care. Moreover, empowering patients through educational initiatives led by nurses can bring better self-monitoring, medication adherence, and lifestyle modifications, all of which are crucial in mitigating the effects of diabetes on the body’s immune response, thus reducing the severity of COVID-19 if contracted.

The Internet of Medical Things(IoMT) has powerful cloud computing ability and efficient data collection ability, which can improve the accuracy and convenience of medical work. As most communications are over open networks, data should encrypted before uploading to ensure the confidentiality of sensitive user data. Searching for encrypted data has become a challenging problem. Public key Encryption with Keyword Search (PEKS) supports the search of encrypted data and provides data privacy protection. PEKS has become a trendy technology, but PEKS still has the following problems: 1. The cloud server, as a semi-honest but curious third party, is likely to return some wrong search results to save computing and bandwidth resources. 2. The single keyword search inevitably produces irrelevant results, wasting computing and bandwidth resources. 3. Most PEKS schemes use bilinear pairing, so the computational efficiency is relatively low. 4. PEKS schemes based on Public Key Infrastructure (PKI) or identity-based cryptography inevitably face problems with certificate management or key escrow. 5. Most PEKS schemes face serious security threats such as Keyword Guessing Attacks (KGA) and File Injection Attacks (FIA). To solve the above problems, we propose a new certificateless verifiable bilinear pair-free conjunctive keyword search encryption scheme(CLVPFCKS) for IoMT using multi-signature.

Stem cells can be used to treat diabetic mellitus and complications. ω3-docosahexaenoic acid (DHA) derived lipid mediators are inflammation-resolving and protective. This study found novel DHA-derived 7S,14R-dihydroxy-4Z,8E,10Z,12E,16Z,19Z-docosahexaenoic acid (7S,14R-diHDHA), a maresin-1 stereoisomer biosynthesized by leukocytes and related enzymes. Moreover, 7S,14R-diHDHA can enhance mesenchymal stem cell (MSC) functions in the amelioration of diabetic mellitus and retinal pericyte loss in diabetic db/db mice. MSCs treated with 7S,14R-diHDHA were delivered into db/db mice i.v. every 5 days for 35 days. Blood glucose levels in diabetic mice were lowered by 7S,14R-diHDHA-treated MSCs compared to control and untreated MSC groups, accompanied by improved glucose tolerance and higher blood insulin levels. 7S,14R-diHDHA-treated MSCs increased insulin+ β-cell ratio and decreased glucogan+ α-cell ratio in islets, as well as reduced macrophages in pancreas. 7S,14R-diHDHA induced MSC functions in promoting MIN6 β-cell viability and insulin secretion. 7S,14R-diHDHA induced MSC paracrine functions by increasing the generation of hepatocyte growth factor and vascular endothelial growth factor. Furthermore, 7S,14R-diHDHA enhanced MSC functions to ameliorate diabetes-caused pericyte loss in diabetic retinopathy by increasing their density in retina in db/db mice. Our findings provide a novel strategy for improving therapy for diabetes and diabetic retinopathy using 7S,14R-diHDHA-primed MSCs.

The stability and optimal control for an SIS epidemic model with demographics and heterogeneous control strategies (immunization and quarantine) on complex networks are investigated. The epidemic threshold, disease-free and endemic equilibria are derived. Then, global asymptotical stability about the two equilibria are studied based on different methods. Furthermore, the optimal control issue about the system is also considered. We obtain the existence and uniqueness of the optimal control and optimal control tactics. Some numerical simulations were conducted to illustrate and supplement the theoretical results. Meanwhile, the effects of the combination of various immunization and quarantine schemes are studied and also compared with the optimal control strategies.

Wetlands, which is composed of soil, vegetation and water, has sufficient water supply and is sensitive to climate change. This study analyzed the coupling degree between wetlands and atmosphere, and discussed the influence of environmental factors (solar radiation and water vapor pressure deficit) on latent heat flux by using the experimental data from the Maduo Observatory of Climate and Environment of the Northwest Institute of Eco-Environment and Resource, CAS and WRF model. The results showed, during the vegetation growthing season, the average value of Ω (decoupling factor) is 0.38 in alpine wetlands, indicating the coupling between wetlands and atmosphere is poor; Solar radiation is the main factor influencing the latent heat flux in the results of both observation data analysis and model simulation, and solar radiation and water vapor pressure deficit still have an opposite reaction to latent heat flux; when solar radiation and water vapor pressure deficit increase by 30%, the average daily amount of latent heat flux increases from 5.57 MJ·m-2 to 7.50 MJ·m-2 and decreases to 5.17 MJ·m-2, respectively. This study provides a new research approach for the study of the parameterization of latent heat flux and evapotranspiration under the context of global climate change.

The valley pseudospin properties of electrons in two–dimensional hexagonal materials result in lots of fascinating physical phenomena, which opens up the new field of valleytronics. The valley-contrasting physics aims at distinguishing the valley degree of freedom based on valley–dependent effects. Here, we theoretically demonstrate that both of the valley–selective high harmonic generation and valley–selective electronic excitation can be achieved by using an orthogonal two–color (OTC) laser field in gapped graphene. It is shown that the asymmetry degrees of harmonic yields in the plateaus, cutoff energies of generated harmonics and electron populations from two different valleys can be precisely controlled by the relative phase of the OTC laser field. Thus the selectivity of the dominant valley for the harmonic radiation and electronic polarization can be switched by adjusting the relative phase of the OTC laser field. Our work offers an all–optical route to produce the valley–resolved high harmonic emissions and manipulate the ultrafast valley polarization on a femtosecond timescale in condensed matter.

In this study, we reported that novel single-chain fusion-proteins linked thromboxane A2 (TXA2) receptor (TP) to a selected G-protein α-subunit q (SC-TP-Gαq), or s (SC-TP-Gαs) could be stably expressed in megakaryocytes (MK). We tested the MK-released platelet-linked particles (PLPs) to be used as a vehicle to deliver the over-expressed SC-TP-Gαq), or s (SC-TP-Gαs) to regulate human platelet function. To understand how the single-chain TP-Gα fusion proteins could regulate opposite platelet activities by an identical ligand TXA2, we used dual-binding domains linked to different signaling pathways within a single polypeptide chain using a 3D structural model. The immature MKs were cultured and transfected with cDNAs constructed from structural models of the individual SC-TP-Gαq and SC-TP-Gαs, respectively. After transient expression was identified, the immature MKs stably expressing SC-TP-Gαq or SC-TP-Gαs (stable cell lines) were selected. The stable cell lines were induced into mature MKs which released PLPs. Western blot analysis confirmed that the released PLPs were carrying the recombinant SC-TP-Gαq or SC-TP-Gαs. Flow cytometry analysis showed the PLPs carrying SC-TP-Gαq were able to perform the activity by promoting platelet aggregation. In contrast, PLPs carrying SC-TP-Gαs reversed Gq to Gs signaling to inhibit platelet aggregation. This is the first time demonstrating that SC-TP-Gαq and SC-TP-Gαs were successfully overexpressed in MK cells and released as PLPs with proper folding. This bio-engineering led to the formation of two sets of biologically active PLP forms, which mediate calcium and cAMP signaling, respectively. As a result, these PLPs are able to bind to identical endogenous TXA2 with opposite activities, inhibiting and promoting platelet aggregation as required for therapeutic process.The results also demonstrated the nucleus-free PLPs could be used to deliver recombinant membrane-bound GPCRs to regulate cellular activity in general.

Objective: To explore the application effect of predictive psychological nursing in the nursing of outpatients with indwelling needle intravenous infusion .Methods: Select 80 patients who received intravenous indwelling needle infusion therapy in the outpatient department of our hospital from January 2022 to December 2022 as the research objects , and divided them into observation group and experimental group according to the different nursing plans received by the patients . 40 cases in each group. The observation group received routine nursing intervention, and the experimental group received predictive psychological nursing intervention. The puncture situation, psychological state level, self-care ability, adverse reactions and nursing satisfaction were compared between the two groups of patients .Results: The puncture success rate of the observation group was 72.5% (29/40), and that of the experimental group was 95.0% (38/40). The puncture success rate of the experimental group was significantly higher than that of the observation group (P<0.05) ; The SAS scores and SDS scores of the treatment group after nursing were significantly lower than those of the observation group (all, P<0.05) ; the self-care skills, self-concept, self-responsibility, health knowledge and ESCA total scores of the experimental group after nursing were significantly higher than those of the observation group. group (all, P<0.05); the incidence of adverse reactions in the observation group was 25.0% (10/40), the incidence of adverse reactions in the experimental group was 7.5% (3/40), and the incidence of adverse reactions in the experimental group was significantly lower than that in the observation group group (P<0.05); the nursing satisfaction of the observation group was 80.0% (32/40), and the nursing satisfaction of the experimental group was 100.0% (40/40), and the nursing satisfaction of the experimental group was significantly higher than that of the observation group (P<0.05 ).Conclusion: The application effect of the predictive psychological nursing intervention model in the outpatient department for intravenous indwelling needle infusion therapy is significant. The implementation of this model can effectively improve the success rate of puncture, improve the patient's psychological state, improve the self-care ability of patients, and reduce the adverse effects of patients. Risk of reaction, so as to further obtain the satisfaction and recognition of patients and their families.

Buildings are responsible for approximately 40% of the world’s energy consumption and 36% of the total carbon dioxide emissions. Building occupancy is essential, enabling Occupant-Centric Control for zero emissions and decarbonization. Although existing machine learning and deep learning methods for building occupancy prediction have achieved remarked progress, their analyses remain limited when applied to complex real-world scenarios. Besides, there is a high expectation for Transformer algorithms to predict building occupancy accurately. Therefore, this paper presents an Occupancy Prediction Transformer network (OPTnet). We fuse and feed multi-sensor data (building occupancy, indoor environmental conditions, HVAC operations) into a Transformer model to forecast the future occupancy presence in multiple zones. We perform experimental analysis and compare it to different occupancy prediction methods (e.g., Decision Tree, Long Short-Term Memory networks, Multi-layer perceptron) and diverse time horizons (1,2,3,5,10,20,30mins). The performance metrics (e.g., Accuracy and Mean Squared Error) are employed to evaluate the effectiveness of prediction algorithms. Our OPTnet method achieves superior performance on our experimental two-week data compared to existing methods. The improved performance signifies its potential to enhance HVAC control systems and energy optimization strategies. We will make the code publicly available at https://github.com/kailaisun/occupancy-prediction-binary to promote transparency and reproducibility.

Dye wastewater containing bisphenol A (BPA) and dyes as pollutants have not been adequately studied. Our previous study revealed that thermoplastic polyurethane (TPU) nanofiber membranes (NFMs) modified by the addition of polyethyleneimine (PEI) and polydopamine (PDA) satisfactorily adsorb dyes. Herein, we first optimized the synthesis conditions for such membranes, noting a PEI:PDA monomer ratio of 2:2 and a deposition time of 48 h to be optimal. Experiments using these membranes revealed that binary systems containing BPA and the dyes (Congo red (CR), Eosin yellow (EY), or sunset yellow (SY)) exhibit three adsorption behaviors. CR and BPA compete with each other for adsorption sites, decreasing the maximum adsorption capacity (Qmax) for CR 208.3 mg/g (in a monomeric system) to 182.4 mg/g, whereas for BPA, it decreased from 26.7 to 22.8 mg/g. The adsorption rates for CR and BPA decreased from 0.002 min−1 and 0.331 min−1 in the monomeric systems to 8.37 × 10−4 min−1 and 0.072 min−1, respectively, in the binary CR–BPA system, exhibiting antagonistic effects. When EY and BPA coexist, Qmax for EY increased from 60.0 (monomeric) to 71.9 mg/g, whereas that for BPA increased from 35.6 to 43.2 mg/g, showing a synergistic effect due to the possible bridging effect. The adsorption sites for SY and BPA are independent of each other. Thus, PDA/PEI TPU NFMs exhibit the potential for removal of dye–BPA composites, whereas binary systems containing BPA with different dyes are adsorbed differently.

Crystallization often occurs in the laser welding of amorphous alloys, reducing the amorphous alloys’ properties. So, it is necessary to simulate the temperature field curve of the welding area by computer and then determine the power and laser moving speed of laser welding. In this paper, the temperature field curve of Zr41.2Ti13.8Cu12.5Ni10Be22.5(Vit1) amorphous alloy in laser welding is obtained by finite element analysis. The continuous heating curve (CHT) of Vit1 is fitted by the Vogel-Fulcher-Tammann (VFT) equation and the Kissinger equation. If the temperature field curve intersects with the CHT curve, crystallization occurs. The experiment results show that the VFT equation can be used to predict the crystallization of Vit1 better in laser welding. The tem-perature and welding time are increased by using low welding speed. Therefore, the temperature of the weld zone cannot fall in time, resulting intersection of the temperature field curve and the CHT curve. So, crystallization can be avoided if the welding speed is controlled within a rea-sonable range, and the highest temperature is kept under the CHT curve.

This study probes the probabilistic features of major fire hazards in enclosed spaces to establish their importance to the occurrence of fires onboard ro-ro passenger ships and in turn to raise effective operational countermeasures. Distinct from the previous studies, the present research employs Bayesian Network (BN) analysis to determine the probabilities of fire hazards more effectively. The findings of the research include five critical basic events (BE) identified namely, vehicle engine fire (fuel system fault), vehicle electric fire (electrical equipment defect or short circuit), used car electrical fire, reefer units electrical fire (electrical appliances defects or short circuit), and cargo spontaneous combustion. Additionally, the risk of fire for lithium - ion battery powered vehicles is also highlighted in the process of BN analysis, which prompts the authors to propose preventive measures for mitigating the possibility of fire occurrence on this type of electric vehicles. It is hoped that these measures can be essential justifications for establishing relevant rules regarding carrying LIB vehicles in enclosed spaces on international level.

3,4-Dihydroquinolin-2(1H)-ones represent a class of valuable bioactive compounds with six-membered nitrogen-containing heterocyclic structures. The development of simple, mild and efficient synthetic methods has been widely concerned by synthetic chemists. In this review, we have summarized a series of different synthetic strategies for the synthesis of dihydroquinoline-2(1H)-ones via catalytic annulation of α,β-unsaturated N-arylamides in the past decade, including covering electrophilic cyclization, radical initiated cyclization and photochemical cyclization reactions. Besides, the substrate scope and mechanistic details are also discussed. This paper will provide a useful reference for the development of diverse synthesis methodologies of 3,4-dihydroquinolin-2(1H)-ones.

With the increasing utilization of intelligent mobile devices for online inspection of electrical equipment in smart grids, the limited computing power and storage capacity of these devices pose challenges for deploying large algorithm models and it’s hard to obtain a substantial number of images of electrical equipment in public. In this paper, we propose a novel distillation method that compresses the knowledge of teacher networks into a compact few-shot classification network, employing a global and local knowledge distillation strategy. Central to our method is exploiting the global and local relationship between the features exacted by the backbone of the teacher network and student network. We compare our method with recent state-of-the-art (SOTA) methods on three public datasets and achieve superior performance. Additionally, we contribute a new dataset, namely EEI-100, which is specifically designed for classification of electrical equipment. We validate our method on this dataset and demonstrate its exceptional prediction accuracy of 94.12% when utilizing only 5-shot images.

For the traditional indoor visible light communication heterogeneous network switching algorithm is only concerned with the research of vertical switching algorithm, however, the research of horizontal vertical collaborative switching combined with multi-carrier modulation technology is seldom mentioned, based on the above, this paper proposes a horizontal-vertical collaborative switching strategy based on the residency time of the communication blind area. Firstly, we use asymmetrically clipped optical OFDM (ACO-OFDM) for signal processing to reduce the bit error rate (BER) of the system by reducing the multipath interference generated during signal transmission.Secondly, the BER is used to determine the communication blind area and to calculate its dwell time. Finally, the threshold time is set as the channel interruption time in the communication blind zone, and the horizontal-vertical cooperative switching is performed by comparing with the dwell time. The simulation results show that the average network throughput is 195.28Mbps, and the average number of handovers is 1.35. Compared with instant vertical handover (IVHO) scheme and dwell vertical handover (DVHO) scheme, the average network throughput is improved by 37.21% and 28.45%, respectively, and the average switching times are reduced by 28.05% and 5.27%, respectively.

Falls are the third-leading cause of disabilities among the elderly population worldwide. In Pakistan, the prevalence is 44%; out of them, 8% develop injuries, placing them at high risk for hospitalization or even premature death. Interestingly, fall is multifactorial, and fall risk depends on individual characteristics (intrinsic factors) and environmental features (extrinsic factors), which can be different from context to context. Therefore, regular assessment of fall risk factors is required to develop a strategy for fall prevention. This study aimed to identify intrinsic risk factors for falls in Pakistani elders living in the communities, and provide evidence for preventive strategies of falls in elderlies. Data were collected from 140 Muslim elders from two residential areas of Peshawar, Khyber Pakhtunkhwa, from July 2022 to August 25, 2022, after taking permission from Zhengzhou University Ethical Review Board (ZUIRB #202254), and District Health Department Office (DHO #14207).Participants were informed and concern was taken before collect data. Data were collected using the Time Up and Go Test (TUGT), the Mini-Mental Status Examination, and interviews regarding the prayer practice. Factors associated with falls were; age, gender, education, cognitive status, TUGT level, incorrect prayer postures, poor vision, and history of falls with a significance of (P.<0.05). Poor cognition, low vision, poor walking speed, and prayers without body movements have good membership with falls risk prediction as (P<0.005) in Omnibus, Lemeshow score (0.77). Hence, our study provides a road map for future risk assessment for falls by adding the four mentioned risk factors as offered in the proposed model to facilitate taking timely action to prevent fall-related ailments in Pakistani elders.

The COVID-19 pandemic has profoundly changed the world and human society in various ways. Infection-related figures are key indicators of the direct impact of the pandemic. In addition to the virus, many vulnerable populations (e.g. patients with complex health conditions) have suffered direct or indirect health impacts, such as delayed treatment or diagnosis of cancer and severe mental illness due to stay-at-home restrictions, or financial issues. Studying these kinds of impacts can provide the community with insights and understanding of how the pandemic has affected patients with health conditions and help inform decision-makers design policies that support various vulnerable populations. This paper surveys analytical work conducted on how COVID-19 has impacted patients with complex health conditions. We categorise vulnerable populations into three specific cohorts: patients with chronic disease, patients with cancer and patients with end-of-life care. We then investigate how each of these cohorts has been impacted by the pandemic. We also identify each cohort from an analytics perspective by leveraging various data collection strategies and analytical methods. The goals of this paper are to provide evidence on how to improve the quality of life for vulnerable populations and to inform a national response strategy for future pandemics, which seems inevitable in a highly globalised economy.

The operation status of manufacturing equipment is directly related to the reliability of the operation of manufacturing equipment and the continuity of operation of the production system. Based on the analysis of the operation status of manufacturing equipment and its characteristics, it is proposed that the concept of assessing the operation status of manufacturing equipment can be realized by applying real-time acquisition of accurate inspection data of important parts of weak motion units and comparing them with their motion status evaluation criteria. Through the study of the application characteristics of fractional-order calculus theory, a differential data fusion model based on the fractional-order differential operator is established. The advantages of Internet of Things (IoT）technology and fractional order differential fusion algorithm are integrated to obtain real-time high-precision data of the operating parameters of manufacturing equipment, and the research objective of operating condition assessment of manufacturing equipment is realized. The feasibility and effectiveness of the method are verified by the application of the method in machining center operation status assessment.

Micro-grids’ operations offer local reliability; in the event of faults or low voltage/frequency events on the utility side, micro-grids can disconnect from the main grid and operate autonomously while providing the continued supply of power to local customers. With the ever-increasing penetration of renewable generation, however, the operations of micro-grids become increasingly complicated because of the associated fluctuations of voltages. As a result, transformer taps are adjusted frequently, thereby leading to the fast degradation of expensive tap-changer transformers. In the islanding mode, the difficulties also come from the drop of voltage and frequency upon disconnecting from the main grid. To appropriately model the above, the nonlinear AC power flow constraints are necessary. Computationally, the discrete nature of tap-changer operations and the stochasticity caused by renewables add two layers of difficulty on top of a complicated AC-OPF problem. To resolve the above computational difficulties, the main principles of the recently-developed "l1-proximal" Surrogate Lagrangian Relaxation are extended. Testing results based on 9-bus system demonstrate the efficiency of the method to obtain the exact feasible solutions for micro-grid operations thereby avoiding approximations inherent to existing methods, while demonstrating that through the optimization, 1. the number of tap changes is drastically reduced, and 2. the method is capable of handling networks with meshed topologies.

Functional connectivity (FC) is a potential candidate that can increase the performance of brain-computer interfaces (BCIs) in the elderly because of its compensatory role in neural circuits. However, it is difficult to decode FC by current machine learning techniques because of a lack of its physiological understanding. To investigate the suitability of FC in BCI for the elderly, we propose the decoding of lower- and higher-order FCs using a convolutional neural network (CNN) in six cognitive-motor tasks. The layer-wise relevance propagation (LRP) method describes how age-related changes in FCs impact BCI applications for the elderly compared to younger adults. Seventeen younger (24.5±2.7 years) and twelve older (72.5±3.2 years) adults were recruited to perform tasks related to hand-force control with or without mental calculation. CNN yielded a six-class classification accuracy of 75.3% in the elderly, exceeding the 70.7% accuracy for the younger adults. In the elderly, the proposed method increases the classification accuracy by 88.3% compared to the filter-bank common spatial pattern (FBCSP). LRP results revealed that both lower- and higher-order FCs were dominantly overactivated in the prefrontal lobe depending on task type. These findings suggest a promising application of multi-order FC with deep learning on BCI systems for the elderly.

Ammonia-oxidizing microorganism communities are abundant and functionally efficacious in nitrification. However, ammonia-oxidizing archaea (AOA) and ammonia-oxidizing bacteria (AOB) groups complicate this process in subtropical streams. This study investigates the abundance of ammonia-oxidizing communities south of the Dabie Mountains, China, using quantitative polymerase chain reaction (qPCR). Clone libraries were utilized to analyze the abundance and microbial structures of AOA and AOB in sediments. Such analysis may provide strong evidence reflecting the links within the environment. The results show that AOB had a lower abundance of copies of the ammonia-oxidizing gene (amoA) than AOA. Interestingly, the AOA and AOB community compositions were correlated with ecological characteristics. The dissolved oxygen (DO) and oxidation-reduction potential (ORP) had significant positive correlations, whereas the phosphorus within the structure had a negative correlation with the abundance of both groups. Our study shows that it might adopt some species related to Nitrosotalea clusters that can resist comparably higher pH (toward pH 6.5). Together, these results imply that the physiological adaptation of microbial guilds to environmental pressures in ammonia-oxidizing archaea might allow them to have a more substantial function of ammonia-oxidizing communities in natural habitats.

Background & Aims: This RCT aimed to investigate the safety and efficacy of MF4637, a medical food comprising highly concentrated, highly purified, long chain (LC) omega-3 fatty acids, (460 mg eicosapentaenoic acid (EPA) and 380 mg docosahexaenoic acid (DHA)) in correcting the omega-3 fatty acid nutritional deficiency present in non-alcoholic fatty liver disease (NAFLD). The potential for MF4637 to reduce liver fat was evaluated in a subset of patients. Methods: 176 subjects with NAFLD were randomised to receive 3 g/d of LC-omega-3 fatty acids (n=87) or placebo (olive oil; n=89) for 24 weeks, in addition to following standard-of-care dietary guidelines for these patients. Thus, interventions were given on top of the dietary advice. The omega-3 index, omega-6:omega-3 fatty acid ratio (primary outcome) and quantitative measurements of red blood cell (RBC) EPA and DHA (secondary outcome) were determined at baseline and study completion. Magnetic resonance imaging-proton density fat fraction (MRI-PDFF) assessment of change in liver fat fraction was conducted in a subset of patients. Results: Of the 176 randomised subjects, 167 were analysed for the primary and secondary outcomes (n=81 in the MF4637 group; n=86 in the placebo group). Supplementation with MF4637 for 24 weeks significantly increased the omega-3 index and absolute values of RBC EPA and DHA, and decreased the omega-6:omega-3 fatty acid ratio in NAFLD patients compared to placebo (p<0.0001). There was a statistically significant reduction in liver fat content within both groups with no difference between them. An inverse relationship between change in absolute RBC EPA+DHA and change in liver fat, AST and ALT levels was seen suggesting that a greater increase in omega-3 content was associated with a reduction for both liver fat content and improvement in liver enzyme levels. Additionally, a significant liver fat-lowering effect of MF4637 compared to placebo was demonstrated in a subset of patients with baseline fatty liver index (FLI) score ≥ 40. There were no serious adverse events related to study interventions. Conclusions: The study results demonstrate that the medical food MF4637, was able to correct the nutritional deficiency of omega-3 in NAFLD patients above and beyond that obtained with nutritional counselling. This demonstrates that MF4637 is beneficial in raising the low omega-3 index observed in these patients. A reduction in hepatic steatosis was demonstrated with both intervention groups although no distinction between groups was seen. Further analyses demonstrate the potential to identify omega-3 sensitive patients using an easily available clinical tool for steatosis prediction.

The nitrogen-doped amorphous oxide semiconductor (AOS) thin film transistors (TFTs) with double-stacked channel layers (DSCL) were prepared and characterized. The DSCL structure composed of nitrogen-doped amorphous InGaZnO and InZnO films (a-IGZO:N/a-IZO:N or a-IZO:N/a-IGZO:N) made the corresponding TFT devices exhibit quite large field-effect mobility due to the existence of double conduction channels. Especially, the a-IZO:N/a-IGZO:N TFTs showed even better electrical performance (μ_FE = 15.0 cm²·V^-1·s^-1, SS = 0.5 V/dec, V_TH = 1.5 V, I_ON/I_OFF = 1.1×10⁸) and stability (V_TH shift of 1.5, -0.5, and -2.5 V for positive bias-stress, negative bias-stress and thermal stress tests, respectively) than the a-IGZO:N/a-IZO:N TFTs. Based on the X-ray photoemission spectroscopy measurements and energy band analysis, it was assumed that the optimized interface trap states, the less ambient gas adsorption, and the better suppression of oxygen vacancies in the a-IZO:N/a-IGZO:N hetero-structures might be responsible for the better behaviors of the corresponding TFTs.

Accurately estimating the pose of spacecraft is indispensable for space applications. However, such targets are generally non-cooperative, i.e., no markers are mounted on it and no parts for operation. Therefore, the detection and measurement of a non-cooperative target is very challenging. Stereovision sensors are important solutions in the near field. In this paper, a rectangular natural feature recognition and pose measurement method for non-cooperative spacecraft is proposed. Solar panels or the bodies of spacecraft are selected as detection objects and their image features are captured by stereo vision. These rectangle features are then reconstructed in 3D Cartesian space through parallelogram fitting on the image planes of two cameras. The vertexes are used to calculate the center position of the rectangle and the direction of the fixed coordinate system to solve the pose and attitude of the non-cooperative target. An experimental system is built to validate the effectiveness of the algorithm. The experimental results show that the average position measurement error of the algorithm is about 10mm and the average attitude measurement error is less than 1°. The results show that the proposed method has high accuracy and efficiency.

Taking a certain type of test centrifuge as the research object, the finite element model of the test centrifuge is established, the vibration characteristics and aerodynamic performance of the test centrifuge are analyzed, and the structural optimization design of the test centrifuge is carried out. In this paper, the load is applied according to the actual working condition of a certain type of test centrifuge. The vibration of the mounting seat of the test centrifuge is analyzed and the structure of the mounting seat is optimized. After optimization, the vibration of the mounting seat is 77.38 % lower than that of the original mounting seat. Then, the aerodynamic analysis of the test centrifuge is carried out. The analysis results show that the test centrifuge moves more smoothly under the whole package shell and the steady flow shell, and the resistance decreases and the shaft load decreases. Finally, the steady flow shell of the test centrifuge is optimized. The analysis shows that the increase of the width of the steady flow shell can reduce the resistance coefficient, which is helpful to the stability of the test centrifuge during operation and reduces the unbalanced response of the system caused by air resistance.

The exponential growth of digital media content has introduced new challenges in managing and classifying internet traffic. Digital media traffic is composed of various applications such as video, audio, social media, and search, and its data structure is complex, incorporating a vast array of features. The classification of traffic data is a crucial aspect of internet traffic management and network security, and it forms the basis for several scenarios, including content distribution, advertising recommendations, and data analysis. Traditional classification methods rely mainly on deep packet inspection and port-based techniques, which have become increasingly ineffective due to the rapid evolution of network traffic. To address this issue, this study proposes a machine learning-based traffic classification method aimed at enhancing the accuracy and efficiency of digital media traffic classification to meet the current needs of traffic management and network security. The paper also analyzes and evaluates the classification effect and prediction capability of various algorithms under different training set sizes to validate the feasibility and effectiveness of the proposed method. The result demonstrates that the neural network algorithm has superior classification and prediction capabilities compared to the decision tree and support vector machine algorithms. Furthermore, our proposed method achieves the highest accuracy of 96.88% with a large training sample of 40,000 data streams, proving its superiority in handling high-dimensional data and complex datasets. The research results are significant for the development of digital media traffic classification and prediction methods and are expected to be applied in practical scenarios.

Pandemics caused by viruses have threatened lives of thousands of people. Viral infection is a complex and diverse process, and substantial studies have been complemented in understanding the biochemical and molecular interactions between viruses and hosts. However, the physical microenvironment where infections implement is often less carefully considered, and the role of mechanobiology in viral infection remains elusive. Mechanobiology focuses on sensation, transduction and response to intracellular and extracellular physical factors by tissues, cells and extracellular matrix. The intracellular cytoskeleton and mechanosensors have been proved to be extensively involved in virus life cycle. Furthermore, innovative methods in vivo and in vitro are being utilized to elucidate how extracellular factors including stiffness, forces and topography in regulating viral infection. Our current review covers how physical factors from different sources coordinate virus infection. We further discuss how this knowledge can be harnessed in future research on cross-fields of mechanobiology and virology.

The plant productivity-richness relationship (PPR) is one of the most debated and important issues in ecology. There have been distinct stages in the research of this issue, including the discovery of the different PPR shapes, respective tests of influencing processes, and integrative research with vegetation investigation, manipulation experiments, and theoretical analysis. The debate largely focuses on what the dominant shapes and underlying mechanisms are. Recent integrative research works following analyses of respective processes affecting PPR have found that the humped, asymptotic, positive, negative, and irregular shapes of PPR are linked to each other. One shape of PPR may change into another. The balance between positive and negative processes determines the different shapes of PPR. Plant diversity has a globally positive effect on plant productivity.