Hospital bed shortage is a worldwide concern. Beds unavailability has caused elective surgery cancellations, at our hospital peaking in spring 2016 at over 50%. This is often due to difficult patient step-down from intensive care (ICU) and high-dependency units (HDU). In our general/digestive surgery service admitting approximately 1000 patients yearly, ward rounds were run on a consultant firm basis. We report a quality improvement (ISRCTN13976096) introducing in our service a structured daily multi-disciplinary board round framework (SAFER Surgery R2G) adapted from the “SAFER patient flow bundle” and the "Red to Green days” approaches to enhance flow, comparing the previous year to 2017, when our framework was applied for 12 months.We used a Plan-Do-Study-Act (PDSA) methodology. Our intervention consisted in 1) systematic communication of the key care plan after the afternoon ward rounds to the nurse in charge; 2) 30’ 10AM Monday-to-Friday multidisciplinary board rounds, attended daily by the senior-team and weekly by hospital and site managers, revising the key care plan aiming at safe, early discharges, assessing the appropriateness of each inpatient day and tackling any cause of delay. We measured patient flow by average length of stay (LOS), ICU/HDU step-downs and operation cancellations count, monitoring safety through early 30-day readmissions. Compliance was assessed by board round attendance and staff satisfaction rate surveys.After 12 months (PDSA 2, N=1032), LOS significantly decreased from 7.2(±8.9) to 6.3(±7.4) days (p=0.003); ICU/HDU bed step-down flow increased by 9.3% from 345 to 375 (p=0.197), surgery cancellations dropped from 38 to 15 (p=0.100). 30-day re-admissions increased from 0.9% (N=9) to 1.3% (N=14)(p=0.390). Average cross-specialty attendance was 80%. Satisfaction rates were >75%, regarding enhanced teamwork and faster decisions.The SAFER Surgery R2G framework has shown an increase in patient flow in the context of an enhanced multidisciplinary approach, requiring senior staff commitment to remain sustainable.

Maize (Zea mays L.) stands as one of the most extensively cultivated crops globally, offering significant contributions to food, animal feed, and biofuel production. Maize yield is significantly impacted by diverse climate and soil variables, yet its productivity faces hindrances due to abiotic stresses, including drought, salinity, extreme temperatures, and cold conditions. In confronting these hurdles, the field of crop breeding has undergone a transformation thanks to high-throughput sequencing technologies (HSTs). These advancements have streamlined the identification of beneficial quantitative trait loci (QTL), associations between markers and traits (MTAs), as well as genes and alleles that contribute to crop improvement. Presently, well-established omics techniques such as genomics, transcriptomics, proteomics, and metabolomics are being amalgamated into maize breeding studies. These approaches have unveiled new biological markers that are being employed to bolster maize's capacity to withstand an array of challenges. In this chapter, we explore the current knowledge regarding the morpho-physiological and molecular mechanisms that underlie the resistance and tolerance of maize to biotic and abiotic stresses. The focus is on utilizing omics techniques to augment maize's ability to withstand these challenges. Moreover, it emphasizes the significant potential of integrating various omics techniques to tackle the challenges presented by biotic and abiotic stress in maize productivity, contrasting with singular approaches.

Background: Falls in hospitalized older patients lead to increased length of stay and poorer discharge outcomes. The Comprehensive Unit-based Safety Program (CUSP) represents a quality improvement intervention for patient safety. Objective: To evaluate CUSP implementation for the prevention of falls at a teaching hospital. Method: An interdisciplinary CUSP team, received a four-hour online module and one-day face-to-face training. The intervention was developed using the WHO implementation science plan-do-study-act framework. Process evaluation was conducted using the UK Medical Research Council framework. The primary outcome measure of patient safety culture was determined using the Safety Attitude Questionnaire (SAQ), while annual fall rates were considered the secondary outcome measure. Results: Safety rounds were conducted during the two-year intervention period, each attended by five to eight HCPs, with nine to 29 patients reviewed each month. Risk factors, plans and actions were administered to individual patients, while local issues were identified and resolved through engagement of senior executives. SAQ domains increased from before (n=39) to after (n=30) the intervention of CUSP. Fall rates reduced from 11.18 per 1,000 bed days pre-implementation to zero falls post-implementation. Conclusion: Improvements in patient safety culture were observed after the implementation of CUSP alongside a reduction in fall rates.

Development and sustainable development are two concepts gaining the attention of scholars, historians and policy makers in recent times. This is because they represent what people and societies across the world today sincerely desired. Every human being or human society deserve improvement in quality of livelihood, health care system, access to food, housing, security, clothing and many other indices of development in a sustainable manner. Based on this momentum, this paper examines the nexus between development and sustainable development. The paper is divided into four sections. The first section spots the conceptual issue woven around the term development as well as sustainable development in literature. The second section clarifies the two concepts (development and sustainable development) and the main perspectives on development were discussed. It also identifies the common and distinctive features between the concept of development and sustainable development. The third section then presents a conceptual framework of analysis on the nexus of between development and sustainable development. Finally, the paper concludes that the duos (development and sustainable development) are two-side of a coin and they complement each other. This is due to the fact that development is people oriented hence it must be sustainable so as to ensure that the advancement of current generation does not deny future generation the opportunity to develop.

The research reported on this paper was aimed at improving the overall efficiency of a PDO certified artisanal cheese production process. Being a PDO certified foodstuff by the EU, it is considered to have properties and qualities determined by the geographical environment in which is made, with its production taking place in a specific and determined geographical location, in this case the Serra da Estrela region. In that sense, the authors conducted a mapping according to a systemic perspective of the processes involved in the context of manufacturing and distribution of certified Serra da Estrela cheese. Numerous methods were used throughout the process, such as a systemic design analysis, and techniques derived from ethnographic methods, which led to the collection of data in the field and consequently provided the immersion of the researcher in genuine work situations. Critical points were identified and emphasized in the systemic map with the purpose of encouraging initiatives to address and overcome the gaps and inefficiencies detected. The systemic design analysis triggered the development of design work. Observations following an ethnographic approach identified ergonomic risks in cheese making during the process of cutting excess chips, fostering the emergence of musculoskeletal disorders at the wrist. A tool that fits best to the task at hand was developed. A prototype of the new tool enabled collecting feedback from use in the work context, in order to inform product development. The domains of agricultural production and microbiology, considering the specific microorganisms developed trough the ripening process of the cheese, turned out to be aspects of high importance for the issue under focus, contributing to a broader understanding of the ripening process and its risks, simultaneously improving the efficiency and success of cheese production. If it were not for the systemic analysis, which served as a link between the boundaries of distinct domains such as the risk of microorganism contamination, ergonomics, energy efficiency, legislation and regulation policies, transportation challenges and economic viability, approached throughout the research. Simultaneously creating bridges between them, the various problems might not have been detected in the first place, as they are usually addressed in specialized disciplines, predetermined by the restrictions of each specific area of knowledge. As a consequence of the development of this research, which was based on an analysis that sought to establish possible connections between various disciplines and tried to constantly maintain a holistic perspective, making new connections and observing the issues from a new angle, apart from the already established methodologies. All this allowed to lay out the seeds for the development of a plan to tackle the critical points identified by the systemic analysis reported in this paper.

Improving the efficiency of germplasm innovation has always been the aim of rice breeders. Tra-ditional hybrid breeding methods for variety selection rarely meet the practical needs of rice pro-duction. The emergence of genome editing technologies, such as CRISPR/Cas9, provides a new approach to the genetic improvement of crops such as rice. The number of published scientific papers related to "gene editing" and "CRISPR/Cas9" retrievable in literature websites of China and other countries exhibited an increasing trend year by year from 2014 to 2023. The literature related to gene editing in rice accounts for 33.4% and 12.3% of all literature on crop gene editing published in China and other countries, respectively, much higher than those in maize and wheat. This article reviews the recent research on CRISPR/Cas9 gene editing technology in rice, especially the germplasm innovation and genetic improvement of commercially promoted varieties with im-proved traits such as disease and insect resistance, herbicide resistance, salt tolerance, quality, nu-trition, and safety. The aim is to provide a reference for the precise and efficient development of new rice cultivars that meet market demand.

Hepatocellular carcinoma (HCC) is the most common type of primary liver cancer and is highly invasive and easily recurs. For HCC, chemotherapy shows a limited effect. The gold standard for HCC treatment includes curative surgical resection or liver transplantation. However, the recur-rence rate at 5 years after liver resection is estimated at approximately 70% and even at 5 years after liver transplantation, it is 20%. Therefore, improving survival outcomes after curative surgi-cal resection of liver cancer is crucial. This review highlights the importance of identifying risk factors for HCC recurrence following radical surgical resection and adjuvant therapy options that may reduce the recurrence risk and improve overall survival, including local adjuvant therapy (e.g., transcatheter arterial chemoembolization and radiotherapy), adjuvant systemic therapy (e.g., small molecule targeted therapy and immunotherapy), and other adjuvant therapies (e.g., chem-otherapy). However, further research is needed to refine the use of these therapies and optimize their effectiveness in preventing HCC recurrence.

Complex illumination condition is one of the most critical challenging problems for practical face recognition. In this paper, we propose a novel method to improve the illumination invariants for solving this challenge. Firstly, a new method based on the Lambert reflectance model is proposed to extract illumination invariant, which is less insensitive to complex illumination variations. Secondly, in order to repair the defects caused by process of illumination invariants extraction, Fast Mean Filter is utilized to smooth and remove noise. Lastly, for raising the richness of information in output image, a nonlinear normalization transformation is proposed. Compared with the state-of-the-arts, experimental results show that the proposed method can extract more robust illumination invariants. Apart from it, the richness of information in processed image is greater and superior performance in face recognition rate is superior.

The flowering period of rice significantly impacts variety adaptability and yield formation. Properly shortening the reproductive period of rice varieties can expand their ecological range without significant yield reduction. Targeted genome editing, like CRISPR/Cas9, is an ideal tool to fine-tune rice growth stages and boost yield synergistically. In this study, we developed a CRISPR/Cas9-mediated multiplex genome editing vector containing five genes related to three traits: Hd2, Ghd7, and DTH8 (flowering stage genes), along with the recessive rice blast resistance gene Pi21 and the aromatic gene BADH2. This vector was introduced into the high-quality Geng rice variety in Zhejiang province, Jiahe212 (JH212), resulting in 34 T0 plants with various effective mutations. Among the 17 mutant T1 lines, several displayed diverse flowering dates, but most exhibited undesirable agronomic traits. Notably, three homozygous mutant lines (JH-C15, JH-C18, and JH-C31) showed slightly earlier flowering dates without significant differences in yield-related traits compared to JH212. Through special Hyg and Cas marker selection of T2 plants, we identified 7, 6, and 2 fragrant glutinous plants devoid of transgenic components, respectively. These single plants will serve as sib lines of JH212 and potential resources for breeding applications, including maintenance lines for Xian-Geng interspecific three-line hybrid rice. In summary, our research offers practical insights and potential resources for targeted improvement of Geng rice varieties, and would also promote the Geng rice varieties expending from the southward to the northward.

This study aimed to evaluate the effectiveness of an intensive care unit (ICU) round checklist, FAST HUGS BID (Feeding, Analgesia, Sedation, Thromboembolic prophylaxis, Head-of-bed elevation, Ulcer prophylaxis, Glycemic control, Spontaneous breathing trial, Bowel regimen, Indwelling catheter removal, and De-escalation of antibiotics) in improving clinical outcomes for patients with severe trauma. Patients admitted to our trauma ICU between 2016 and 2020 were retrospectively analyzed. We divided the participants into two groups: before (before-FD, 2016-2017) and after (after-FD, 2019-2020) the checklist's implementation. We compared patient characteristics and clinical outcomes, including ICU and hospital length of stay (LOS) and in-hospital mortality. Survival analysis was performed using Kaplan–Meier curves and multivariable logistic regression models, and multiple linear regression analysis was used to identify independent factors associated with ICU and hospital LOS. Compared with the before-FD group, the after-FD group had significantly lower in-hospital mortality and complication rates, shorter ICU and hospital LOS, and reduced duration of mechanical ventilation. revealed that the checklist's implementation was a significant independent factor in reducing ICU and hospital LOS and in-hospital mortality. In this before/after study, we observed that the FAST HUGS BID checklist implementation was associated with decreased ICU and hospital LOS and in-hospital mortality.

This manuscript explores the significance of continuous improvement in software development and digital product management, highlighting its role in addressing challenges and achieving superior results in today's dynamic business landscape. Drawing on Lean Thinking and Agile principles, the paper emphasizes the importance of customer focus, multidisciplinary collaboration, respect for people, inspection and adaptation, experimentation, incremental delivery, and continuous feedback in driving continuous improvement. It identifies key problems associated with the lack of continuous improvement, including quality issues, stagnation, inefficiency, lack of learning, lack of participation and collaboration, and lack of adaptability. To overcome these challenges, the paper proposes a solution that leverages agile events and interactions, such as sprint retrospectives and daily scrum meetings, and introduces a "kaizen board" as a visual tool to manage and monitor the continuous improvement process. The manuscript highlights the benefits of continuous improvement in terms of quality enhancement, efficiency gains, improved customer satisfaction, and adaptability to change. It stresses the need for fostering a culture of learning and constant adaptation, and provides insights on applying continuous improvement across different dimensions: product, process, team, and culture. The paper concludes by emphasizing the significance of commitment and active participation from all team members for achieving sustainable progress and success in digital transformation efforts.

Managers are often faced with the task of improving the management of the production 17process in order to maintain the sustainability of production efficiency in a highly competitive en-18vironment. The submitted contribution deals with the design of a system that will support them in 19the selection of progressive methods and technologies in order to improve the management of pro-20duction processes. Managers often follow new trends in this issue, but it is not easy to work on the 21knowledge that proven progressive technologies can bring them higher efficiency. The presented system is based on the use of knowledge of existing solutions of manufacturers of automotive components, where companies solve similar problems in production management. The mix of methods and technologies used in the management of production processes brings companies different results in the achieved efficiency. The proposed system for supporting the selection of the production management method and technology is designed from blocks of data collection, benchmarking of the performance of production processes of industrial enterprises, and further from data mining technology to obtain knowledge about the effect on efficiency from already implemented technologies. The last blocks help to examine the differences in the implementation of the same methods and technologies and allow to present the obtained results to the manager in the form of recommendations for choosing a suitable progressive method and technology.

Faba bean (Vicia faba L.) was considered a minor crop in the Canadian prairies until recently, but its potential for cultivation is increasing due to its positive environmental impact and economic value. This review provides a historical summary of faba bean improvement in western Canada. Although traditional breeding methods have proved useful, in the last decade faba bean improvement has benefited from advances in genetics, biochemistry and molecular breeding tools. The overall breeding goal is to develop high yielding germplasm with improved agronomic characteristics that will be of economic value to the emerging faba bean sectors, including the plant protein industry. To maximize value and acceptance by producers, processors and the food industry as a source of protein and dietary fibre, future faba bean varieties need to be high-yielding, have diverse seed size classes, disease resistance, genetically low vicine-convicine concentration, and have wider adaptation to different agro-ecological zones of Canada. The experiences over the last 40 years of faba bean improvement in western Canada may be useful to other breeding programs globally located in regions with similar agroecology. In the past 10–15 years, faba bean genetic development in Canada has benefited greatly from research and development interactions with most of the faba bean research programs in northern Europe.

Arabidopsis and other model plants can help improve crops by providing a reference framework for assembling omics data from plants. Arabidopsis is extensively studied and has a well-curated and annotated genome, making it an excellent reference organism for comparative analysis. When there is no reference genome of the organism being investigated, using the genome of Arabidopsis may be an option thanks to the extensive knowledge we have about it. Crop improvement can help to increase crop yields, improve crop quality, and enhance resistance to pests, diseases, and environmental stresses. It can also help to reduce the use of pesticides and fertilizers, which can have negative impacts on the environment and human health. Therefore, crop improvement is essential to ensure food security and sustainability in the face of global challenges such as climate change, land degradation, and water scarcity. The assembly process of genomic, transcriptomic, and metabolomic data from plants using carefully selected information on Arabidopsis can lead to a deeper understanding of organisms and their potential for genetic improvement for crops. However, the successful integration of data requires expertise and experience to design more effective and precise crop improvement strategies.

This study evaluates the effectiveness of an integrated vestibular rehabilitation program in improving balance, motor control, and proprioceptive function in patients diagnosed with Benign Paroxysmal Positional Vertigo (BPPV). The prospective observational study involved 107 participants who underwent a tailored rehabilitation regimen, including the Epley maneuver, Brandt-Daroff exercises, and balance and proprioceptive training. The program was designed to address the vestibular and proprioceptive deficits caused by BPPV, with the goal of restoring normal function and reducing the risk of symptom recurrence. Dynamic Gait Index (DGI) and Balance Beam Test were used to assess progress, showing significant improvements in balance stability and dynamic motor function. The findings support the integration of vestibular rehabilitation into standard care for BPPV patients, highlighting the program's potential to enhance patient outcomes and reduce recovery time. However, the study also notes limitations such as the lack of a control group and the need for further research to explore the long-term effects of such interventions.

Using desi-cow waste products like Jeevamrit, natural farming is widespread among farmers for improving soil biology and productivity. Jeevamrit enhances soil chemical and microbiological properties without needing large quantities of farmyard manure (FYM), as a sustainable farming practice with a reduced carbon footprint. Despite its traditional use, Jeevamrit faces criticism due to a lack of scientific evidence. This study investigated the comparative effect of Jeevamrit and chemical fertilizers on the growth and yield of marigold cv. Siracole. In this study mother block of marigold was raised for both summer and winter seasons. The cuttings were harvested from the mother block and then kept for rooting. The rooted cuttings were planted at monthly intervals and evaluated for flowering parameters and compared to those treated with RDF (30:20:20 N, P, and K g/m2). Soil supplied with Jeevamrit enhanced bacteria (26.33%), fungi (18.92%), and actinomycetes (31.21%) populations compared over the recommended dose of fertilizers (RDF) (i.e. N:P: K @ 30:20:20 g m-2). Jeevamrit-treated plants have marketable flower yield per square meter (3.98 %) and shelf life (9.93 %) compared to RDF. The study concludes that Jeevamrit @ 2 liter m-2 is a sustainable and effective alternative to traditional fertilizers for enhancing marigold production in the mid-hills of the Himalayan region, where natural farming is already accepted.

Genetic engineering has become an essential element in developing climate-resilient crops and environmental sustainable solutions to respond to the increasing need for global food security. Genome editing using CRISPR/Cas [Clustered regulatory interspaced short palindromic repeat (CRISPR)-associated protein (Cas)] technology is being applied to a variety of organisms, including plants. This technique has become popular because of its high specificity, effectiveness, and low production cost. Therefore, this technology has the potential to revolutionize agriculture and contribute to global food security. Over the past few years, increasing efforts have been seen in its application in developing higher-yielding, nutrition rich, disease resistant, stress-tolerant “crops” fruits and vegetables. Cas proteins such as Cas9, Cas12, Cas13, and Cas14, among others, have distinct architectures and have been used to create new genetic tools that improve features that are important for agriculture. The versatility of Cas has accelerated genomic analysis and facilitated the use of CRISPR/Cas to manipulate and alter nucleic acid sequences in cells of different organisms. This review provides the evolution of CRISPR technology exploring its mechanisms and contrasting it with traditional breeding and transgenic approaches to improve different stress tolerance. We have also discussed the CRISPR/Cas system and explored three Cas proteins that are currently known to exist: Cas12, Cas13, and Cas14 and their potential to generate foreign DNA free or non-transgenic crops that could be easily regulated for commercialization in most countries.

The stability issues in the widely known organic inorganic halide perovskite, CH3NH3PbI3, lead to the development of alternative halide double perovskite materials which get great attention in recent times. Although the stability issue seems promising, both materials and device performance of these photovoltaic materials remain inferior and challenging for improvements. Furthermore, the power conversion efficiency of single junction organic inorganic halide perovskite is now 24.2% and 29.15% for textured monolithic perovskite/silicon tandem solar cell, but for all-inorganic halide perovskite solar cell is 7.11% and halide double perovskite solar cells based on Cs2AgBiBr6 and Cs2TiBr6 is 2.8% and 3.3%, respectively, which is far less than 24.2% and 29.15%, respectively. This creates big question and concern that can both all-inorganic halide perovskite solar cell and halide double perovskites solar cells really be an acceptable alternatives to replace organic inorganic halide perovskite solar cells or lead based perovskite solar cells in the market in order to realize the practical applications? Not only this concern, but also there are many other big challenges facing by halide double perovskite solar cells. Such big challenges include: a) geometric constraints and limited integration with interfacial materials, b) dynamic disorder and a wide bandgap and localized conduction band caused by cubic unit cell which restrains the interactions of orbitals, c) high processing temperature which may limit on the diverse applications, d) low electronic dimensionality making them less appropriate for single junction solar cell purpose and etc. Moreover, origin of electronic and optical properties such as the polarizability, the presence of molecular dipoles and their influence on the dynamics of the photo-excitations in the halide double perovskites remains unlock concern that need to be elucidated. Now, another big question is how to develop overcoming mechanisms for such challenges. Can we really overcome these current limitations faced by halide double perovskites so that we use them for commercialization? This research roadmap for performance improvement is suggested focusing on: materials surface and bulk engineering, bandgap engineering, interfacial engineering, composition engineering, doping engineering, device architectural engineering, polar and domain order engineering. This was the reason that this review was developed in order to forward great contributions to the readers and commercial ventures.

With the growing trend of urbanization and the growing number of people migrating to cities, the demand for the development and construction of new buildings as well as the infrastructure has risen, meaning that the construction industry must adapt to the trends. The growing demands with shorter deadlines for an industry already known for high costs and not delivering on time means that productivity must be increased without increasing the cost. The solution for this might lie in the application of the Lean philosophy to the construction industry. This paper analyses the application of the Lean philosophy in order to increase the productivity in the airport construction site. The paper highlights the potential for enhancing productivity in construction workplaces by concurrently fostering continuous improvement and sustainability through the implementation of the A3 methodology and Lean principles, resulting in waste reduction and increased value.

Audit&Feedback (A&F) consists of multidimensional quality improvement activities, but its optimal design is still debated. Our study aims to outline how interventions of the Italian EASY-NET research program were designed, to explore whether desirable characteristics of an "ideal" A&F were adopted. A&F design included description of the working group, targeted clinical behaviors, selected indicators, sources, feedback procedures, corrective actions expected. Information was classified into four topics: nature of the desired action, type of data available, feedback display and delivery. Out of 9 projects, 3/9 aimed at changing a focused clinical behavior, 6/9 were generic; all projects identified clinicians as recipients, 8 explicitly considered managers. It was planned to develop an average of 27 indicators from administrative databases, as needed supplemented by ad hoc data collection. Five projects included outcome measures. Comparators derived from scientific literature or from territorial real-life data. Feedback was scheduled every 12, 6 or 3 months, or upon request, delivered as aggregate data (graphs and tables) via web platforms, e-mail, workshops, and individual meetings. In conclusion, at an early stage the projects were mostly “wide focused”, but improvements in A&F design and delivery have been introduced, and projects, still ongoing, will offer interesting insights on A&F effectiveness.

This systematic review examines the potential of digital language learning in contributing to students' cognitive gains. The study reviews existing research on the relationship between digital language learning and cognitive benefits, with a focus on enhanced problem-solving skills, memory, and multitasking ability. The findings indicate that higher levels of digital competences correlate positively with language proficiency outcomes, suggesting that participants with greater digital skills achieve better language learning outcomes. Digital technologies offer interactive and engaging methods of learning, which can positively impact retention and understanding. However, the study also acknowledges the limitations of digital foreign language learning, such as the lack of face-to-face interaction and the need for high motivation and discipline. The research questions explored in this study are: (1) Does digital language learning contribute to cognitive gains in foreign language education? and (2) What are the pedagogical implications for cognitive improvement in digital foreign language education? The study employs the Preferred Reporting Items for Systematic Reviews and Meta-analyses (PRISMA) methodology to identify and analyze relevant research articles. The results of the review suggest that working with printed texts may be more effective for cognitive gains compared to electronic texts. Additionally, implementing more senses through digital language education appears to be beneficial for cognitive gains. The article concludes by discussing the implications of these findings and the need for further research in this area.

The concept of omics-based technological approaches has promoted translational research by integrating knowledge from diverse areas to understand their dynamics by exploring the molecular mechanisms underlying various processes paving the way for further improvements in the crops quality by providing sound knowledge on controlling plant diseases. This area is not profoundly investigated a decade back and hence this knowledge has become exceedingly important in modern times as it has got potential for being utilized in crop improvement programs. In this review, the contributions of different omics technologies including genomics, transcriptomics, proteomics, and metabolomics in understanding and materializing the ways involved in the plant pathogen interaction (PPI) is discussed. Furthermore, opportunities, challenges, and perspectives of omics linked to signaling mechanisms have also been highlighted that are significantly linked to plant-microbe interactions.

Background: Routine human papillomavirus (HPV) vaccine uptake continues to be suboptimal since its recommendation in 2006 for girls and in 2011 for boys. This paper aims to review published quality improvement (QI) methodologies on interventions to improve HPV vaccine uptake among adolescents; Methods: Science Direct and Scopus databases were searched for QI initiatives evaluating the effect of multimodal interventions to improve HPV vaccination rates (initiation and/or completion of series) among adolescents. Studies that included an outcome of interest among adolescents aged 10 to 18 years old were included. Two investigators worked independently to screen for potential articles and a designated investigator extracted data on study characteristics and evaluated the outcomes; Results: Preliminary search yielded a total of 523 articles and 13 were included in the final analysis. Common strategies were provider-specific and patient- and/or parent-specific interventions, with an emphasis on education and knowledge empowerment. System-level interventions such as policy changes and revised protocol were less commonly prescribed despite being associated with more significant weight on the overall outcome; Conclusions: Creative, sustainable, and economical multilevel interventions that focus not only on provider training and public education but also incorporate local policy and system enhancement can substantially improve HPV vaccination coverage among adolescents.

Introduction: The aim of this study was to prospectively evaluate parents’/guardians’ late recall of surgical procedures and risks of elective surgery after pre-operative interview with surgeons. Materials and Methods: All parents/guardians of patients <18 years of age undergoing elective procedures from January 15th to September 1st, 2022, were prospectively enrolled in the study. Before discharge, parents/guardians were asked to complete a questionnaire regarding the duration of the consent procedure, duration of the interview, quality of the informative handouts, and their ability to recall the type of disease, type of surgical procedure, and surgical risks. Answers were graded from 1 to 4. Results: One hundred and two questionnaires were returned. In all cases, informed consent was obtained between 24 and 72 hours prior to surgery. The following responses were collected: 98/102 (96%) parents/guardians reported that the duration of the consent process was adequate; 95/102 (93%) reported that the handouts were fully informative, and 7/102 (7%) reported that they were partially informative regarding explanation of the disease and surgical procedure; regarding complications, 93/102 (91%) perceived the handouts to be fully/partially informative, while 4/102 (4%) perceived the handouts to be poorly/non-informative, and 5/102 (5%) did not provide a response; 94/102 (92%) stated that they remembered the pathology, but only 87/94 (93%) recalled it correctly; 90/102 (88%) stated that they remembered the type of procedure, but only 76/90 (84%) recalled it correctly; and 53/102 (52%) stated that they remembered the surgical risks, but only 20/53 (38%) could recall more than one complication. Conclusions: Late recall of surgical complications by parents was poor despite the high perceived quality of the surgical risk handouts and medical interview.

In recent years, Chinese manufacturing enterprises compete to chase the wave of "digital revolution", digital empowerment has become an important strategic path of technological reform for many manufacturing enterprises. Based on the micro data of listed companies, this paper investigates the impact of digital transformation of Chinese listed companies on the quality of their export products. It is found that digital transformation can significantly improve the quality of enterprises' export products. After a series of robustness tests, this conclusion is still valid, and there are two ways to improve innovation performance and total factor productivity. The export product quality enhancement effect of enterprise digital transformation also has the heterogeneity of ownership, region and industry. In the further study, this paper also examines the impact of digital transformation on the internal salary gap of enterprises, and finds that digital transformation may increase the internal salary gap of enterprises, and form a "masking effect" on the quality of export products. To a certain extent, this paper deepens the understanding of the study of enterprise digital transformation on the quality of export products and its differences, and provides certain guidance for enterprises to implement the strategy of digital transformation.

The contribution deals with the selection of progressive methods and technologies to improve the management of production processes in the industrial area. The first chapter of the contribution summarises the theoretical starting points for the management of production processes and their progressive concepts. Chapter 2 deals with the analysis of the current state of play in the use of methods and technologies in production management and summarise its problem areas. Chapter 3 presents the design of a system for selecting the appropriate method and technology to improve the management of the production process. The system presented is designed from data collection blocks, a benchmark for the performance of industrial enterprises' production processes, and data mining to gain knowledge of the impact of the methods and technologies used on the performance of production processes. The last block of the system allows the presentation of the obtained results, which sets out the recommendation for the choice of progressive method and technology. The system is partially verified in the last chapter of the contribution.

Automation of vegetable seedling transplanting has provided opportunities for saving labors and improving productivity. Some changes in seedling agronomy are necessary for efficient transplanting. In this study, the local nursery substrates were added with the herbaceous peat, the sphagnum peat and the coir peat, respectively. Effects of the new compound substrates were investigated on the seedling qualities and the root-substrate strength. In the results, we found that the addition of these horticultural mediums significantly affected the physiochemical properties of the original substrates. Under the same nursery conditions, some appropriate additions could promote the seedling growth. And the deficient or excessive additions were to inhibit the growing development of seedlings and their roots. The corresponding additions would also improve the structural characteristics of the root lumps. Generally, the nursery substrates added with the sphagnum peat were relatively optimized in contribution to the seedling qualities and the root-substrate strength. Especially as the commercial substrate and the sphagnum peat were mixed at the volume ratio of 2:1, the dry matter accumulation of seedlings was 2.18 times more than the original. Their root lumps had the best consolidation strength, which may be an effective application for the necessary qualities of seedlings for automatic transplanting.

As many as 20-25% of the population experiences harm in outpatient settings, yet these locations are underrepresented in the literature compared to hospitals. We examined results from the Medical Office Survey on Patient Safety Culture designed by the Agency for Healthcare Research and Quality. The survey administered in 2012 gathered perceptions from 23,679 individuals in 934 unique medical offices. We examined associations of organizational patient safety climate composites on frequency of safety and quality issues, overall quality score, and safety rating. We found organizational patient safety composites are all positively and significantly associated with a higher overall quality score and patient safety rating, and fewer safety and quality issues. Office processes and standardization appeared to have the most consistent influence on perceived quality outcomes. Our results indicate it may be advantageous for medical offices to improve on the factors that contribute to positive safety climate.

The cluster randomized trial ARena (Sustainable reduction of antibiotic-induced antimicrobial resistance, 2017-2020) promoted the appropriate use of antibiotics for acute non-complicated infections in primary care networks (PCNs) in Germany. A process evaluation aimed to provide insights into determinants of practice and explored factors associated with antibiotic prescribing patterns. In a nested mixed-methods approach, a three-waves survey used study-specific questionnaires for participating physicians and medical assistants to assess potential impacts and uptake of the complex intervention program. Stakeholders received a one-time online questionnaire to reflect on network-related aspects. Semi-structured, open-ended interviews with a purposive sample of physicians, medical assistants and stakeholders explored aspects regarding the acceptance of the program components for daily practice and the perceived sustainability of intervention component effects. The intervention components were perceived to be smoothly integrable into practice routines. The highest uptake was reported for the educational components: feedback reports, background information, e-learning modules, and disease specific quality circles. Participation in PCNs was seen as motivational factor for guideline-oriented patient care and the adoption of new routines Future approaches to fostering appropriate use of antibiotics by targeting health literacy competencies and clinician’s therapy decisions should combine evidence-based information sources, audit and feedback reports and QCs.

Sustainable agricultural production is endangered by several ecological factors such as drought, extreme temperatures, excessive salts, parasitic ailments, and insect pest infestation. These challenging environmental factors may have adverse effects on future agriculture production in many countries. In modern agriculture, conventional crop breeding techniques alone are inadequate for achieving the increasing population’s food demand on a sustainable basis. The advancement of molecular genetics and related technologies are promising tools for the selection of new crop species. Gene pyramiding through marker assisted selection (MAS) and other techniques have accelerated the development of durable resistant/tolerant lines with high accuracy in the shortest possible period of time for agricultural sustainability. Gene stacking has not been fully utilized for biotic stress resistance development and quality improvement in most of the major cultivated crops. This review emphasizes on gene pyramiding techniques that are being successfully deployed in modern agriculture for improving crop tolerance to abiotic and biotic stresses for sustainable crop improvement.

Companies have been increasing the amount of data that they collect from their systems and processes, considering the decrease in the cost of memory and storage technologies in recent years. The emergence of technologies such as Big Data, Cloud Computing, E-Science, and the growing complexity of information systems made evident that traceability and provenance are promising approaches. Provenance has been successfully used in complex domains, like health sciences, chemical industries, and scientific computing, considering that these areas require a comprehensive semantic traceability mechanism. Based on these, we investigate the use of provenance in the context of Software Process (SP) and introduce a novel approach based on provenance concepts to model and represent SP data. It addresses SP provenance data capturing, storing, new information inferencing and visualization. The main contribution of our approach is PROV-SwProcess, a provenance model to deal with the specificities of SP and its ability in supporting process managers to deal with vast amounts of execution data during the process analysis and data-driven decision-making. A set of analysis possibilities were derived from this model, using SP goals and questions. A case study was conducted in collaboration with a software development company to instantiate the PROV-SwProcess model (using the proposed approach) with real-word process data. This study showed that 87.5% of the analysis possibilities using real data was correct and can assist in decision-making, while 62.5% of them are not possible to be performed by the process manager using his currently dashboard or process management tool.

One of the most important aspects in the fabrication of car seats is the quality of its welded joints. In this proposal, a design of experiments (DoE) approach is used to improve the actual process capability (Cpk) of weld penetration depth in automotive seat adjusters using a laser beam welding (LBW) machine TRUMPF TruDiode 3006. Welding speed effects, laser power, and focal position in the Z axis were considered to determine the optimal welding penetration depth conditions, which is a minimum of 1.20 mm in cold rolled steel metal sheets ZE 790 with a thickness of 1.60 mm. The initial process capability evaluation indicated a Cpk value of 0.50, considering the initial process parameters. The proposed design was modeled using the response surface methodology, stepwise reduction technique, F-test, and before and after process capability evaluation for validation purposes. After applying the proposed methodology, a Cpk of 1.81 was obtained, resulting in a significant improvement of the process, reducing defective parts from 6.51% to 0.00%.

The diagnosis of streptococcal throat infection is an area where current practice results in significant over diagnosis of bacterial infection with resulting implications for antimicrobial use and resistance. The use of molecular point of care (POC) testing has been shown previously to alter antibiotic prescribing decisions when compared to Centor scoring. In this study POC testing was shown to perform significantly better than FeverPAIN and McIsaac scores in the diagnosis of streptococcal throat infection providing further support for the use of Abbott ID NOW point of care testing to reduce antibiotic prescribing.

In recent years, with the development of the Internet of Things and distributed computing, the "server-edge device" architecture has been widely deployed. This study focuses on leveraging autoencoder technology to address the binary classification problem in network intrusion detection, aiming to develop a lightweight model suitable for edge devices. Traditional intrusion detection models face two main challenges when directly ported to edge devices: inadequate computational resources to support large-scale models and the need to improve the accuracy of simpler models. To tackle these issues, this research utilizes Extreme Learning Machine for its efficient training speed and compact model size to implement autoencoders. Two improvements over the latest related work are proposed: First, to improve data purity and ultimately enhance detection performance, this study partitions the data into multiple regions based on the prediction results of these autoencoders. Second, leveraging autoencoder characteristics to investigate further the data within each region. We used the public dataset NSL-KDD to test the behavior of the proposed mechanism. The experimental results show that when dealing with multi-class attacks, the model's performance was significantly improved, the accuracy and the F1-score are improved by 3.5% and 2.9%, respectively maintaining its lightweight nature.

Metabolic engineering in plants offers powerful strategies to enhance crop yield and quality, addressing global challenges in agriculture and food security. This study explores cutting-edge approaches in manipulating primary and secondary metabolic pathways, utilizing advanced genetic modification tools to improve key traits in crops. We examine successful applications that have enhanced photosynthetic efficiency, nutrient use, stress tolerance, and the production of valuable metabolites. The study also delves into emerging trends, such as synthetic biology approaches and multi-gene trait stacking, which are revolutionizing the field. By integrating omics technologies and computational modeling, researchers are optimizing metabolic engineering designs with unprecedented precision. As the field rapidly evolves, we consider the regulatory and biosafety aspects of genetically modified crops, providing insights into the future of sustainable agriculture and crop improvement.

Phytoene desaturase (PDS) is a plant enzyme involved in carotenoid biosynthesis. The PDS gene has been used as a selective marker for genome editing in several plant species, including banana (Musa spp.). Its knockout promotes dwarfism and albinism, characteristics that are easily recognizable and highly favorable. In Musa spp., the A genome increases fruit production and quality, whereas the B genome is associated with tolerance to biotic and abiotic stresses. The objective of this study was to identify a molecular marker in the PDS gene to easily discriminate the A and B genomes of banana. A 2166 bp fragment for the ‘PDSMa’ marker was identified as polymorphic for the A genome (identification accuracy of 99.33%), whereas ~332 and ~225 bp fragments were detected for the ‘PDSMb’ primer with 100% accuracy using MedCalc software. To the best of our knowledge, this is the first study to use the PDS gene to determine doses of the A genome and identify the B genome in Musa spp., which will aid in evaluating the genomic constitution of banana hybrids and accessions at the seedling stage, and accelerating their classification in crop genetic improvement programs.

Aquaculture by-products can be compromised an important liming material of increasing soil pH and soil fertility. The aim of this research was to assess the effect of mussel shells on soil pH, on organic matter and on soil nutrients. In this study a pot experiment was carried out at the De-partment of Ichthyology and Aquatic Environment (University of Thessaly, Greece). A acidic soil (pH 4.26) amended with 6 different proportions of mussel shell (0.0, 0.1, 0.3, 0.5, 1, 3 and 6%) in two different grain sizes (Fine powder (>1 mm) and Coarse powder (1-2 mm)), resulting in 13 treatments. According to the results, it was observed that pH, organic matter, Available P and Exchangeable K increased. Specifically, the highest pH values observed at 6% rate. Available P and Exchangeable K achieved the highest content at 6% Fine powder treatment, 46.2 and 190.1 mg kg-1, respectively. Similarly, organic matter had the highest value in 6% Fine powder pots (2.27%). Moreover, Total N concentration varied from 0.11 to 0.14 but no statistically significant different was noticed between the treatments. In conclusion, mussel shells can compose a promising liming material in the agriculture section.

This review article explores the significance of beneficial microorganisms in crop improvement, highlighting their roles in promoting plant growth, enhancing nutrient uptake, and protecting against pathogens. The symbiotic interactions between plants and microorganisms have been extensively studied, revealing the vast potential of these beneficial partnerships in sustainable agriculture. The article discusses various types of beneficial microorganisms, including mycorrhizal fungi, rhizobia, and plant growth-promoting bacteria, elucidating their mechanisms of action and their impact on plant health and productivity. Furthermore, it examines the application of microbial inoculants and biofertilizers in crop production systems, emphasizing their potential to enhance crop yield, nutrient use efficiency, and stress tolerance. The review also explores emerging technologies, such as metagenomics and synthetic biology, in harnessing the full potential of beneficial microorganisms for crop improvement. Overall, we highlight the importance of beneficial microorganisms in sustainable agriculture and provide insights into their promising applications in crop enhancement.

The escalating environmental challenges that stem from urban residential waste in densely populated areas have become increasingly prominent in recent times. As a result, the waste management sector has experienced significant growth nationwide. However, due to the predominantly manual nature of these processes, their effectiveness falls short of meeting the current demand. Addressing these issues requires process enhancement. In this context, Industry 4.0, particularly the concept of Digital Twins, emerges as a potential avenue for refining processes. To tackle both current and future industry challenges, it is imperative to create a comprehensive methodology capable of generating effective solutions within the waste management sector. This paper provides an explanation of digital twins, outlines the methodological framework comprising an architectural structure and layered model, and details a series of sequential methodical stages for implementing digital twins based on the specific scope determined by the end-user. A noteworthy aspect is the transformative potential of digital twins in enhancing efficiency and precision within waste management practices. By providing a virtual real-time representation of the waste management system, digital twins empower simulations and experimentation to fine-tune processes. Furthermore, they facilitate informed decision-making by offering a detailed visualization of the complete system, simplifying the identification of challenges and opportunities for improvement. that this article derives from the presentation titled "Digital Twin application methodology for the improvement of production and service systems. Application to waste management processes" at the "Sustainable Smart Cities and Territories International Conference" held in the city of Manizales, Colombia, from 21st to 23rd June 2023.

Background: This study aims to investigate the patient safety culture at a sports medicine hospital and explore quality of healthcare and associated factors. Methods: In a cross-sectional study design, the tool Hospital Survey on Patient Safety Culture (HSOPC) was administered online among staff at a sports medicine hospital in Doha, Qatar. About 319 staff participated from 898 staff who received emails (35.5%). Results: The results showed that 49.2% of the staff rated the patient safety grade as excellent and 36.1% as very good, which sums up to 85.3%. Factors associated with better patient safety grade were work climate (OR 10.3 95% CI (3.2 to 33.6); teamwork OR 7.6 95% CI (2.8 to 20.9) and team communication (OR 2.9 95% CI (1.1 to 7.6). Conclusions: Addressing the work climate, enhancing communication, and cohesive work within teams facilitates a culture of trust that improves patient safety grade. Ensuring quick return to play is a team effort involving multiple disciplines, hence a high performance and safety culture can enhance teamwork. Reducing punitive response to error and encouraging staff and supervisors are key areas that can improve safety culture in sports medicine organizations, and efforts should be placed in this area.

A frequent problem in Geotechnics is the soils with inadequate physical-mechanical properties before the efforts to which they will be subjected by the constructions, incurring cost overruns caused by their engineering improvement. The need to improve the engineering properties of soils is not recent, currently observing that the most common alternatives are binders such as cement and lime. The climate change observed in recent decades and the uncontrolled emission of greenhouse gases have motivated Geotechnical and Geoenvironmental researchers to seek mechanisms for soil reinforcement from a more sustainable and environmentally friendly approach by proposing the use of recycled and waste materials. An alternative is natural fibers, which can be obtained as waste from many agro-industrial processes, implying their high availability and low cost. Sawdust as a by-product of wood processing has a rough texture that can generate high friction between the fiber and the matrix of the soils, leading to a significant increase in its shearing strength and bearing capacity. This concept of improving the properties of soils using natural fibers distributed randomly is inspired by the natural phenomenon of grass and/or plants that when growing on a slope can effectively stabilize a said slope.

Opportunistic routing has emerged as one of the prominent solutions for efficient data delivery in ad hoc networks especially in highly dynamic scenarios. Opportunistic routing uses the broadcasting nature of the wireless medium to increase the number of potential forwarding nodes in the network, thereby improving the delivery rate. But most of the proposed opportunistic routing protocols suffer from increased duplicate data forwarding at the intermediate nodes in the network which leads to increase in traffic and reduced efficiency. We propose a novel method which uses acknowledgements for controlling the data forwarding by intermediate nodes and thereby eliminating most of the duplicate forwarding in the network. Simulation results show that our proposed method is much more efficient that all the major existing opportunistic protocols.

This research work is concerned in the exergy analysis of the continuous-convection drying of onion. The influence of temperature and air flow rate was studied in terms of exergy parameters. The energy and exergy balances were carried out taking into account the onion drying chamber. Its behaviour was analysed based on exergy efficiency, exergy loss rate, exergetic improvement potential rate and sustainability index. The exergy loss rates increase with the temperature and air flow rate augmentation. Exergy loss rate is augmented at higher drying air temperatures and flow rates because the overall heat transfer coefficient increase. On the other hand, the exergy efficiency increases with the air flow rate augmentation. This behavior is due to the energy utilization was improved because the most amount of supplied energy was utilized for the moisture evaporation. However, the exergy efficiency decreases with the temperature augmentation due to the free moisture is less, then, the moisture begins diffusing from the internal structure to the surface. The exergetic improvement potential rate values show that the onion drying process presents a high potential to improve the exergy efficiency. The sustainability index of the drying chamber varied from 1.9 to 5.1. To reduce the environmental impact of the process, the parameters must be modified in order to ameliorate the exergy efficiency of the process.

With the advances in industry and commerce, passengers have become more accepting of environmental sustainability issues; thus, more people now choose to travel by bus. Government administration constitutes an important part of bus transportation services as the government gives the right-of-way to transportation companies allowing them to provide services. When these services are of poor quality, passengers may lodge complaints. The increase in consumer awareness and developments in wireless communication technologies have made it possible for passengers to easily and immediately submit complaints about transportation companies to government institutions, which has brought drastic changes to the supply-demand chain comprised of the public sector, transportation companies, and passengers. This study proposed the use of big data analysis technology including systematized case assignment and data visualization to improve management processes in the public sector and optimize customer complaint services. Taichung City, Taiwan was selected as the research area. There, the customer complaint management process in public sector was improved, effectively solving such issues as station-skipping, allowing the public sector to fully grasp the service level of transportation companies, improving the sustainability of bus operations, and supporting the sustainable development of the public sector-transportation company-passenger supply chain.

There is limited real-world data from India examining the treatment characteristics, safety, and efficacy of ceftazidime-avibactam against Gram-negative organisms especially multidrug-resistant pathogens including Carbapenem-Resistant Enterobacterales and Carbapenem-Resistant Pseudomonas. In this retrospective study, the real-world treatment patterns, effectiveness, and safety of ceftazidime-avibactam in treating Gram- negative infections were assessed. Data was extracted from electronic health records of adult patients admitted to the hospital with documented Gram-negative infection who had received treatment for at least 48 hours with ceftazidime-avibactam as a part of routine clinical management. Among the 189 patients, on day 3, clinical symptoms improvement was recorded in 79.6% of patients. Clinical success was achieved in 79.5% and 76.3% of assessed patients on day 7 and day 14/End-of-treatment, respectively. Microbiological success was reported in 76% of patients on day 7 and in 60.3% of patients on day 14 or EOT. The mean treatment duration of ceftazidime-avibactam therapy was 6.92 (± 4.1) days. No new safety concerns were identified. In conclusion, this study provides real-world evidence on treatment patterns and clinical outcomes associated with ceftazidime-avibactam in India, complementing the previously reported literature. The results suggest ceftazidime-avibactam is an effective and tolerable option for the management of Gram-negative infections in critically ill patients.

This study examines the environmental challenges faced by Malaysian industries in adhering to industrial effluent regulations with the research question, what are the challenges in complying with environmental legislations from industries? It investigates the primary factors contributing to non-compliance and the perspectives, knowledge, and needs of Malaysian industries regarding environmental compliance. This study recommends the best strategy for promoting self-compliance. Thirteen stakeholders from various industries with environmental management experience were interviewed. Over the past seven years, these industries have shown low com-pliance with the Industrial Effluent Regulation 2009, prompting an exploration of their adaptability to regulations. Challenges identified include cost, employee attitudes, technology, management support, public complaints, and jurisdictional issues. Responses varied from divergent to unified viewpoints, highlighting the complexity of compliance issues. Respondents suggested enhancing compliance through behavioral changes, including incentives, enforcement, awareness, guidance, industry ratings, management commitment, and public disclosure of emissions. Suggestions for improvement and innovative solutions emerged based on participants' experiences, emphasizing the importance of continuous improvement. The study emphasizes the government's crucial role in ensuring regulation adherence but underscores the need for analyzing barriers and exploring alternative approaches. Understanding industry perspectives and strategies is essential for progress. Compliance, however, requires an analysis of the current challenges and adopting adaptive measures. It is important to understand industries' perspectives and strategies to move forward.

Accurate clinical diagnosis of patients presenting to primary care settings with acute sore throat remains challenging, often resulting in the over-prescribing of antibiotics. Using point-of-care tests (POCTs) to differentiate between respiratory infections is well-accepted, yet evidence on the application within primary care is sparse. We assessed the application of testing patients (n=160) from three family practices with suspected Streptococcal infections using rapid molecular tests (ID NOW Strep A2, Abbott). In addition to comparing clinical evaluation and prescription rates with either usual care or with testing, patients and staff completed a questionnaire about their experience of molecular POCT in primary care. The immediate availability of the result was important to patients (100%) and staff (≈90%) stated that molecular testing improved quality of care. Interestingly, only 22.73% of patients with a Centor score >2 tested positive for Strep A and overall, less than 50% of Centor scores 3 and 4 tested positive for Strep A with the ID NOW testing platform. The addition of rapid molecular POCTs to clinical assessment resulted in a 55- 65% reduction in immediate and deferred antibiotic prescriptions. The intervention was popular with patients and medical staff but was associated with increased cost and a longer appointment length.

This work focused on proposing a plan for improvement and control of the customer service process in a customer service center, based on a waiting line analysis where it describes all the elements that interact in the system and a statistical analysis of processes to define the state in which it operates. Subsequently, the simulation of processes is applied to represent the system studied, and with it, to be able to evaluate different strategies for improvement and increase in productivity. The following strategies were evaluated: correction of the instability of customer service processes, establishment of new specification limits according to the promise of value to be fulfilled to customers, human resource management, administrative technical support. Finally, with the results obtained from the simulation of the system, the improvement and productivity increase plan is planned according to the DMAMC (Define, Measure, Analyze, Improve, Control, or DMAIC) continuous improvement cycle established in six sigma

Agriculture has been experiencing a difficult situation because of limiting factors in its production, Natural biostimulants (NBs) have emerged as a novel alternative. This study reviews NBs produced through Solid-State Fermentation (SSF) from organic waste, focusing on the processes and production methods. The aim is to highlight their potential for improving agricultural productivity and promoting sustainable agriculture. Through a literature review, the effects of NBS on crops were examined, as well as the challenges associated with their production and application. The importance of standardizing production processes, optimizing fermentation conditions, and assessing their effects on different crops is emphasized. Furthermore, future research areas are identified, such as enhancing production efficiency and evaluating the effectiveness of SSF-produced NBS in different agricultural systems. In conclusion, SSF-produced NBS offers a promising alternative for sustainable agriculture, but further research and development are needed to maximize its efficacy and enable large-scale implementation.

The objective of the prototype is to eliminate the polluting contamination of water sources, due to the leak of industrial waste without any kind of treatment, mainly generated by the industries and home sector. In this project, a prototype of water purification by plasma technology has been designed. The prototype will convert contaminated water into the plasma stream and eliminate the pathogens from the water by exposing it to ultraviolet radiation and plasma sterilisation. The polluted water will be accelerated at high speed using a water pump in order to convert it into a liquid-gas mixture for ease plasma generation. This process will be achieved when the electric supply from a source of alternating current (AC) is applied to the water by means of high voltage electrodes. After which, the mixture slows down to return into liquid form and the clean water is obtained. The whole process takes place without significantly raising the temperature also knows as non-thermal plasma. The device also has an automatic flow and pressure control system. Finally, a short feasibility study has been conducted on the water samples collected and report obtained from Chennai Metropolitan Water Supply and Sewage boards are reported. It has been concluded that this new plasma-based water treatment system will be more efficient and cheaper than the current wastewater treatment techniques and can be used in the future as the replacement of current secondary and tertiary treatments of industrial wastewater.

This research presents a solution to the problem of planning the optimum area for economic crops by developed mathematical models and developed an algorithm to solve the problem of planning the optimum area by considered economic value for the maximize profit of farmers. The data were collected from farmers in 8 provinces in the northeastern region of Thailand. The 3 economic crops studied were rice, cassava and sugarcane. The solving problem methods were 1) Created mathematical models and solved the problems with Lingo V.11. 2) Improved Differential Evolution algorithms (I-DE) to solve the problems, which had 3 local search methods included (Swap, Cyclic Move and K-variable moves). The results of this study showed that in the small and medium problems instances, Lingo V.11 and DE provided equal profit outcome but DE was faster but in the large size of test instances DE generated better solution than that of Lingo v.11 when Lingo simulation time is set to 250 hours and DE simulation time has set to maximum 21.82 minutes. 2) Comparing DE and I-DE , I-DE outperforms DE in finding the better solution for all size of test instances (small, medium and large).

Toby Walsh in “The Singularity May Never Be Near” gives six arguments to support his point of view that technological singularity may happen but that it is unlikely. In this paper, we provide analysis of each one of his arguments and arrive at similar conclusions, but with more weight given to the “likely to happen” probability.

This paper delves into the comprehensive analysis and investigation of thermodynamic enhancement and exergy optimization of turbofan engines through the integration of fuzzy logic and newest meta-heuristic optimizers, like the Artificial Bee Colony (ABC) and Particle Swarm Optimization (PSO). In contemporary engineering practices, exergy analysis stands out as a crucial and indispensable tool utilized by numerous engineers and researchers in the design, operation, and performance evaluation of energy systems. Its multifaceted advantages include the precise determination of location, types, and quantification of exergy losses and production. By augmenting exergy efficiency while concurrently curbing exergy destruction, substantial enhancements in engine performance and cost reduction can be achieved. The study focuses on the CF6-80A and CFM56 turbofan engines, scrutinizing individual components such as the fan, low-pressure compressor, high-pressure compressor, combustion chamber, high-pressure turbine, and low-pressure turbine. Key parameters for engine evaluation encompass exergy efficiency, recovery potential, relative exergy destruction, fuel depletion rate, and inefficiency. To conduct a rigorous exergy analysis, engine modeling is imperative, particularly during the cruise phase, which predominantly characterizes engine operation. Subsequently, exergy analysis is executed in accordance with established thermodynamic principles, leveraging equations governing mass conservation, energy conservation, and exergy conservation for each engine component. Further optimization of exergy destruction is achieved through the application of meta-heuristic optimizers and fuzzy logic, facilitating informed decision-making processes.

The research presented in this paper examines a new proposed approach for identifying safety improvement sites on rural highways. Unlike conventional approaches, the proposed approach does not require crash history, but rather utilizes classified variables for traffic volume, geometric features, and roadside characteristics that do not require access to exact data or extensive technical expertise. The research validates the performance of the proposed approach using field data from a large sample of rural two-lane highway segments in the state of Oregon including traffic, roadway, and crash data. Using observed crash history as a reference, the performance of the proposed ap-proach was compared to two of the well-established methods in practice, namely: the Empirical Bayes (EB) and the Potential for Safety Improvement (PSI) methods. The study results suggest that, using crash density for highway segments, the performance of the proposed method was lower than that of the EB and PSI methods. This is despite the high R-square value of the predictive model used in the proposed method. However, when using crash frequencies for highway segments, the per-formance of the proposed method was found comparable to the well-established EB and PSI methods.

Background Most of the Leber hereditary optic neuropathy (LHON) cases are bilateral and sequential, how-ever there are rare unilateral examples, or those in which the delay of onset of vision loss between one and the other eye is longer. In the case of presumed childhood amblyopia in one eye, the vision loss in the good eye may be the only symptom of bilateral disease, that was unnoticed in previ-ously amblyopic eye, or a preexisting episode of LHON on the “amblyopic” eye. Clinical decision in such cases may be difficult and suggestive for other forms of atypical optic neuropathy until confirmed by genetic testing. Case series We present three genetically confirmed (MT-ND1:m.3700G>A, MT-ND6:m14484 T>C, and MT-ND4:m.11778G>A) patients with subacute vision loss in previously good eye with the other eye believed to be amblyopic from the childhood, and their features different of what would be expected in true amblyopia. In all, electrophysiology testing showed bilaterally reduced ampli-tude of PERG with low VEP P100 wave amplitudes and prolonged peak time in both eyes, also unusual for amblyopia. During the follow-up, pallor of the optic discs progressed in all eyes. Significant thinning of the retinal nerve fiber layer around the optic disc (pRNFL) and ganglion cell complex (GCC) in the macular region was present. All three patients had peculiar history. First patient was treated for presumed hyperopic amblyopia that did not improve since child-hood and experienced visual loss on the good eye at the age of 17 and was negative for the three typical LHON mutations. Extended testing confirmed atypical pathogenic variant MT-ND1:m.3700G>A in homoplasmy. The second patient with presumed strabismic amblyopia had unusual presentation of vision loss only at the age of 61 and after exclusion of other causes, typical MT-ND4:m.11778G>A pathogenic variant was found in homoplasmy. The third case was peculiar as he had presumed strabismic amblyopia since childhood and had some degree of disc pallor in the amblyopic eye upon presenting with loss of vision on the good eye at the age of 21 and typical pathogenic variant m14484 T>C, p.Met64Val was subsequently confirmed. However, one year after the disease onset, he started to experience significant spontaneous functional im-provement in the non-amblyopic up to 1.0 Snellen, whilst improvement in the presumed amblyop-ic eye was modest, suggesting preexisting amblyopia. This interestingly extensive improvement was carefully followed by electrophysiology as well as visual acuity and fields. Conclusion This report shows three different scenarios of presentation of LHON in patients with presumed uniocular amblyopia from childhood. In such cases, the diagnosis may be difficult and detailed structural and functional evaluation of the optic nerve head is necessary to assess whether earlier LHON episode was misdiagnosed as amblyopia or whether LHON presented bilaterally on both eyes whilst only being noticed in the previously good eye.

As a result of the COVID 19 outbreak that has affected the whole world, teacher leadership has gained more significance. Teacher leadership is a multidimensional concept. While some teachers exercise leadership only at the classroom level, others exercise leadership at macro level. This level of leadership enactment is directly related to how teachers construct their professional identity in relation to leadership. This study aims to explore the leadership-related professional identities of teachers who came to the fore especially during the COVID 19 pandemic period by using the latent profile analysis method. The data were collected a sample of 710 teachers. Teachers completed Teacher Leadership Behavior Scale that measures teacher leadership behaviors at four levels: classroom, parental, micro-level, macro-level. Participants also completed Rosenberg Self-Esteem Scale, Teacher Self-Efficacy Scale, Openness to Authority Scale, and Job Satisfaction Scale. As a result of latent profile analysis, three distinct profiles of teacher leadership identity emerged: those who exercise leadership at a minimum level, an intermediate level and a maximum level across all four levels of teacher leadership. These profiles were labeled as "extended professionality," "intermediate professionality," and "restricted professionality," drawing upon Hoyle's (1974) conceptualization of teacher professional identity. These findings suggest that teachers construct their identity differently about teacher leadership. It is essential for school leaders to first explore those different levels of professional identity and tailor their professional development activities accordingly.

Electric vehicles (EVs) will have a greater need for the amount of electricity needed to charge them as their popularity grows. It is anticipated that in order to accomplish this objective, it will be essential to implement a variety of solutions for grid transportation that are designed to complement one another and to make significant changes to the transmission infrastructure. It is possible to reduce the amount of energy that is lost on the power network through strategic planning and control, which may include economic models and methods to engage and reward users. This would eliminate the need for grid upgrades. Charging electric vehicles can also assist alleviate problems with transmission systems that are caused by the allocation of electric vehicles (EVs) using bidirectional charging method. The most significant problems that can occur with a transmission network are power loss and unstable voltage. Adding EV units to the transmission network is typically an effective method for resolving these challenges. As a result, EVs need to have the appropriate arrangement and dimensions. This research establishes where and how many electric vehicles (EVs) should be in a radial transmission network both before and after the adjustment is made. An artificially intelligent (AI) approach, known as a hybrid genetic algorithm particle swarm optimization (HGAIPSO), is used both before and after the radial network modification to find the optimal EV location and size. When electric vehicles are coordinated in an active transmission network, power losses are decreased, voltage profiles are raised, and system stability is increased. These benefits can be attributed to the greater use of electric vehicles. The simulation found that incorporating EVs into the testing system resulted in a considerable decrease in the quantity of power that was wasted. The minimal bus voltage of the system also undergoes similar kinds of enhancements. According to the findings of the comparative study, the proposed method mitigates both the voltage fluctuations and the power losses that occur in the transmission system. For type 1, type 2, and type 3 EV allocations, the IEEE-30 bus test system reduced real power loss by 40.70%, 36.24%, and 42.94%, respectively. IEEE-30 bus voltage reaches 1.01 pu.

Climate change poses a serious threat to global agricultural activity and food production. To address this issue, plant genome editing technologies have been developed to provide an alternative solution for crop improvement. Unlike conventional breeding techniques (e.g., selective breeding and mutation breeding), modern genome editing tools offer more targeted and specific alterations of the plant genome to produce crops with desired traits, such as higher yield and/or stronger resilience to the changing environment. In this review, we discuss the current development and future applications of genome editing technologies in mitigating the impacts of biotic and abiotic stresses on agriculture. We focus specifically on the CRISPR/Cas system, which has been the center of attention in the last few years as a revolutionary genome-editing tool in various species. We also conducted a bibliographic analysis on CRISPR-related papers published from 2012 to 2021 (10 years) to identify trends and possible gaps in the CRISPR/Cas-related plant research. In addition, this review article outlines the current shortcomings and challenges of employing genome editing technologies in agriculture with notes on future prospective. We believe combining conventional and more innovative technologies in agriculture would be the key to optimizing crop improvement beyond the limitations of traditional agricultural practices.

Increasing agricultural productivity is indispensable to meet future food demand. Crop im-provement programs rely heavily on genetic diversity. The success of weeds in the ecosystem can be attributed to genetic diversity and plasticity. Weedy rice, a major weed of rice, has diverse morphology and phenology, implying wide genetic diversity. Study was conducted to genotype weedy rice accessions (n =54) previously phenotyped for herbicide tolerance and allelopathic potential using 30 SSR markers. Cultivated rice (CL163, REX) and allelopathic rice (RONDO, PI312777, PI338047) were also included in the study. Nei’s genetic diversity among weedy rice (0.45) was found to be higher than cultivated rice (0.24) but less than allelopathic rice (0.56). The genetic relationship and population structure based on herbicide tolerance and allelopathic po-tential were evaluated. Herbicide-tolerant and susceptible accessions formed distinct clusters in the dendrogram, indicating their genetic variation, whereas no distinction was observed between allelopathic and non-allelopathic weedy rice accessions. Weedy rice accession B2, which was previously reported to have high allelopathy and herbicide tolerance, was genetically distinct from other weedy rice. Results from the study will help leverage weedy rice for rice improvement programs as both rice and weedy rice are closely related, thus having a low breeding barrier.

The growing population meet the challenge for agricultural production. CRISPR/Cas9 technology is based on plant research for the development of the new varieties as well as disease resistance crops. In addition the deletion of significant characters makes the new alleles from the CRISPR/Cas9. Recent and reliable molecular scissor for genetic engineering. The review is focused on the various application of the CRISPR/Cas9 technology in plant enhancement of plant disease resistance, stress burden in plant, nutritional improvement, and quality of crops from the CRISPR/Cas9 system. The clustered regularly interspaced short palindromic repeat (CRISPR)-associated protein9 (cas9) is adopted from the prokaryotic type II system. CRISPR/Cas9 is simplicity and efficiency than ZENs and TALENs for the genome engineering. Due to rapid growing of the CRISPR/Cas9 system has been formulate the adaptation of many plant species. The current advancement of plants and future schemes of improve of CRISPR technology has been presented in contest of multiplex editing, knowledge on induced mutation whether the factor effect in CRISPR/Cas9 technology in plant. Remarkable perspective and challenges of CRISPR/Cas9 technology in significance of plant genetic modification.

RNA-guided genomic transcriptional regulation tools, namely Clustered Regularly Interspaced Short Palindromic Repeats interference (CRISPRi) and CRISPR-mediated gene activation (CRISPRa), are a powerful technology for the field of functional genomics. Deriving from the CRISPR/Cas9 system, both systems comprise a catalytically dead Cas9 (dCas9) and a single guide RNA (sgRNA). This type of dCas9 is incapable of cleaving DNA but retains its ability to specifically bind to DNA. The binding of the dCas9/sgRNA complex to a target gene results in transcriptional interference. The CRISPR/dCas9 system has been explored as a tool for transcriptional modulation and genome imaging. Despite its potential applications and benefits, the challenges and limitations faced by the CRISPR/dCas9 system include the off-target effects, PAM sequence requirement, efficient delivery methods, and the CRISPR/dCas9-interfered crops being labeled as genetically modified organisms in several countries. This review highlights the progression of CRISPR/dCas9 technology as well as its applications and potential challenges in crop improvement.

Growing energy demand in the distributed energy system (DES) besides new charging loads of electric vehicles (EVs) make DES infrastructure unavailable earlier than normal projections. DES lines need to be upgraded to carry the modern demand of customers. DES line upgrade (LU) cost minimized and deferred to the next years by using energy storage system (ESS). ESS offers the opportunity to use energy flexibly in the distribution grid. It is possible to use ESS to shift the inevitable upgrade costs of the distribution grid elements and increase the power quality of the distribution grid. In this study, a method is proposed to extend the lifespan of DES with ESS and reduce line upgrade and investment costs in the distribution system. For this purpose, the IEEE 33 bus test grid is used, and the proposed method is tested and analyzed with different case studies. According to the results, the proposed method can reduce the investment cost by up to 80%. Besides, ESS usage considering load increase and line conditions of the distribution grid, upgrade costs of distribution grid are shifted, resulting in an optimal dimensioning and positioning while extending the lifespan of the distribution grid elements and, at the same time, offering significant improvements in energy quality. Additionally, it is seen that the power losses of the distribution grid are reduced up to 26%, and the voltage profile of buses is improved with the usage of ESS.

Important policy developments in dementia and palliative care in nursing homes between 2010 and 2015 in Flanders, Belgium might have influenced which people die in nursing homes and how they die. We aimed to examine differences between 2010 and 2015 in the prevalence and characteristics of residents with dementia in nursing homes in Flanders, and their palliative care service use and comfort in the last week of life. We used two retrospective epidemiological studies, including 198 residents in 2010 and 183 in 2015, who died with dementia in representative samples of nursing homes in Flanders. We found a 23%-point increase in dementia prevalence (P-value<0.001), with a total of 11%-point decrease in severe to very severe cognitive impairment (P=0.04). Controlling for this difference in resident characteristics, in the last week of life, there were increases in the use of pain assessment (+20%-point; P<0.001) and assistance with eating and drinking (+10%-point; P=0.02) but no change in total comfort. The higher prevalence of dementia in nursing homes with no improvement in residents’ total comfort while dying emphasize an urgent need to better support nursing homes in improving their capacities to provide timely and high-quality palliative care services to more residents dying with dementia.

The concept of genetic improvement in relation to biological control involves the exploitation of natural genetic variation for the benefit of existing biological control agents (BCAs). Despite recent calls for this process to be adopted in biological control research, there is no clear overview of the current state of research into genetic variation within a biological control context, including quantifiable estimates such as narrow-sense heritability (h²). In this systematic review, we aim to determine the current state of research on the genetic variation of biological control traits in natural enemies. After the searching process, screening for papers that can deliver on our research question reduced the initial 2,927 search hits to only a mere 69 papers for data extraction. Of these, the majority (73.6%) did not report quantitative values for genetic variation. Extracting the traits measured in these papers, we categorized them according to two approaches; the first related to fitness components, and the second related to biological control importance. This systematic review highlights the need for more rigorous reporting of the quantitative values of genetic variation to enable the successful genetic improvement of biological control agents.

This study used double-bounded dichotomous-choice to estimate and analyze the factors affecting households’ willingness to pay (WTP) for water quality improvement. This study notes that households with higher income, living near polluted water source, using tap water instead of natural water, who are handicraft producers, and who have more members are willing to pay more. However, households who rarely hear about environmental pollution issues and who are offered a higher bid are more likely to refuse to pay. Solutions to improve water quality are suggested such as to raise people's awareness through communication channels and social organizations; to increase income associated with environmental protection policies; to construct wastewater treatment plants; to encourage the relocation of production establishments to industrial parks and industrial complexes; to put regulations on collection, payment and sanctions in case of not declaring and paying fees into village conventions; to promulgate circulars, and bylaws to concretize and simplify regulations and policies of the Government, Ministry of Natural Resources and Environment.

Opportunistic routing is the latest technique that uses the broadcasting nature of the wireless medium to increase the number of potential forwarding nodes in the network. This, in turn improves the delivery rate and reliability of data transmission in the network. Compared to all previous classes of routing protocols, opportunistic routing offers numerous advantages which is exploited by the latest applications for efficient communication and resource sharing in dynamic ad hoc networks. These applications provide dynamic communication in disaster recovery environments. The objective of this research work is to review and classify all the major opportunistic routing protocols proposed for dynamic ad hoc networks. Further the issues and challenges with each of these existing protocol is discussed and future research directions are put forward

Opportunistic routing uses the broadcasting nature of the wireless medium to increase the number of potential forwarding nodes in the network. This, in turn improves the delivery rate and reliability of data transmission in the network. Compared to all previous classes of protocols, opportunistic routing offers numerous advantages which is exploited by the latest applications for efficient communication and resource sharing in dynamic ad hoc networks. The objective of this research work is to review and classify all the major opportunistic routing protocols proposed for dynamic ad hoc networks. Further the issues and challenges with each of these existing protocol is discussed and future research directions are put forward.

Opportunistic Routing is a promising paradigm that has been proposed for efficient and reliable transfer of data packets in mobile ad hoc networks. This routing strategy takes advantage of the broadcasting nature of the wireless medium to increase the number of probable forwarding devices and improves the reliability of data transfer in the network. Opportunistic Routing utilizes the reception of the same broadcasted packet at multiple devices in the network and selects one best forwarder dynamically from the set of multiple receivers. A number of opportunistic routing protocols have been proposed over these years for effective data delivery in ad hoc networks. But as the speed and mobility of devices increases in the network, performances of the existing opportunistic routing protocols degrade considerably, leading to reduced Quality of Service and poor transmission efficiency. The exceptional potential of opportunistic routing is thus underutilized. In this research we introduce Optimized Opportunistic Routing (OOR) strategy that guarantee excellent Quality of Service and high transmission efficiency to the latest applications using opportunistic routing for communication in highly dynamic ad hoc networks. Simulation results show that our method achieve significant performance improvements compared to all other existing opportunistic routing protocols in highly dynamic mobile ad hoc networks.

Case studies (CS) attempt to help students increase critical thinking skills and engagement while working through a real-life scenario in various disciplines, including medicine, law, and business. However, the CS method has not been heavily utilized in biological sciences. The present study investigated the effect of the CS method on undergraduate biology students’ conceptual understanding, academic outcomes, and perspectives. A case study was applied in a one-semester undergraduate biology course, which was compared to ten semesters of standard sections. Participants completed course pre- and post-tests, pre- and post-case tests, and an online survey to assess their conceptual understanding and engagement. The initial lowest quartiles were determined from the individual course pre-test scores, which were lower than class averages. Results suggested that the CS method helped students in learning outcomes, critical thinking, and conceptual understanding toward biology. In post-test learning gains, the CS group did 20% better than the non-CS group, with the largest benefit seen in the initially lowest pre-test quartile of the class. Moreover, post-case learning gains were 55% improved in the case test. Survey results indicated that students had positive attitudes toward CS for their engagement in plant biology content. Overall, the distribution of A grades improved by 2.6-fold from standard to CS groups. We conclude that the use of CS may address course content engagement and have the potential to effectively boost academic performance, especially for the initially lowest quartile in undergraduate plant biological sciences courses.

Aiming at the problem of low pollutant concentration in the sewage treatment plant due to external water intrusion into the sewage collection system, which in turn leads to low pollutant reduction efficiency. A sewage system in Zhenjiang City is taken as an example. Analyze the situation of external water intrusion in the sewage pipe network, and determine the external water intrusion proportion based on the water quality and quantity method. First, the dry season flow rate of the sewage pipe is obtained according to the monitoring data of the flowmeter. Then, the key research areas are screened out based on the changes in the concentration of water quality characteristic factors. Furthermore, chemical oxygen demand and electrical conductivity are used as the water quality characteristic indicators to characterize shallow groundwater and river water. In addition, the proportions of groundwater and river water intrusion in the sewage pipe network are quantitatively analyzed based on the chemical mass balance equation. At the same time, the dredging detection method is used to assist in the investigation, and finally the engineering rectification of the problems found in the drainage is carried out. The results show that the water quality and quantity method can effectively identify the types of external water and analyze the proportion of external water intrusion, which is of exemplary significance for the evaluation of sewage collection systems.

Soil improvement methods can result in changes in the microbial community in blueberry soil. However, there have been few reports on the impacts of different soil improvement methods on the microbial function, particularly on endophytic microbe. In this study, we analyzed the response of microbial community composition, microbial function and nitrogen (N) cycle to different improvement methods using high throughput sequencing. We aimed to investigate the best soil improvement method from a microbial perspective. The results showed that the highest microbial diversity was observed in the T4 treatment (peat combined with mushroom bran), followed by the T2 treatment (peat combined with acidified rice husk) both in the rhizosphere and roots. The dominant phyla were Proteobacteria and Actinobacteria, which were most abundance in the T4 and T1 (peat combined with sulfur) treatments in the rhizosphere soil, respectively, but showed the opposite trend in the root endophytic bacterial community. Interestingly, Acidobacterium and Paludibaculum, belonging to the Acidobacteria phylum, were found to have the highest influence according to the correlation network analysis. And these bacteria were most abundant in the T2 treatment in the rhizosphere soil. The rhizosphere soil microbial communities were clustered into two categories: one for T1 and T2 treatments, and another for T3 (mushroom bran) and T4 treatments. Compared to the other treatments, the T1 treatment had the most significant impact on microbial functional pathways in the blueberry roots. T2 treatment promoted the growth of N fixation functional bacteria both in the rhizosphere soil and roots. At the module level, the T2 treatment increased the relative abundance of N fixation and decreased the relative abundance of assimilating nitrate reduction reaction (ANRA), dissimilating nitrate reduction reaction (DNRA), denitrification and completed nitrification in the blueberry rhizosphere soil. Additionally, the T2 treatment increased the abundance of root endophytic microbes involved in N fixation. Overall, our findings suggest that the addition of peat combined with acidified rice husk is the optimal soil improvement method for blueberry cultivation.

Myelodysplastic syndromes and myeloproliferative neoplasms both represent hematologic diseases associated with bone marrow failure often resulting in anemia. For those patients, transfusion of red blood cell (RBC) units is essential, but results in iron overload (IOL) that may affect various organ functions. Therefore, iron chelation therapy plays a major role in anemic patients, not only because it reduces IOL, but also because it may improve hematopoietic function by increasing hemoglobin or diminishing requirement of RBC transfusions. To assess the utility, efficacy and safety of the different iron chelation medication approved in Germany as well as to examine the effect of chelation on hematopoietic insufficiency, a prospective, multicenter, non-interventional study named EXCALIBUR was designed. In total, 502 patients from 106 German hospitals and medical practices were enrolled. A large proportion of patients switched from deferasirox dispersible tablet to deferasirox film-coated tablet, mainly due to more convenient application which was reflected in the treatment satisfaction questionnaire for medication scores. Iron chelation was effective in lowering serum ferritin levels, with the observed adverse drug reactions being in line with the known safety profile. Hematologic response occurred in a few patients, comparable to other studies that examined hematologic improvement in patients with MDS.

Water deficit caused by drought is a significant threat to crop growth and production. Nitric oxide (NO), a water- and lipid-soluble free radical, plays an important role in cytoprotection. Apart from a few studies supporting the role of NO in drought responses, little is known about this pivotal molecular amendment in the regulation of abiotic stress signaling. In this review, we highlight the knowledge gaps in NO roles under drought stress and the technical challenges underlying NO detection and measurements, and we provide recommendations regarding potential avenues for future investigation. The modulation of NO production to alleviate abiotic stress disturbances in higher plants highlights the potential of genetic manipulation to influence NO metabolism as a tool with which plant fitness can be improved under adverse growth conditions.

Crop plants should be resilient to climatic factors in order to feed ever-increasing populations. Plants have developed stress-responsive mechanisms by changing their metabolic pathways and switching the stress-responsive genes. The discovery of plant transcriptional factors (TFs) as key regulators of different biotic and abiotic stresses have opened up new horizons for plant scientists. TFs perceive the signal and switch certain stress-responsive genes on and off by binding to different cis-regulatory elements. The above 50 species of plant TFs have been reported in nature. DREB, bZIP, MYB, NAC, Zinc-finger, HSF, Dof, WRKY, and NF-Y are important with respect to biotic and abiotic stresses whereas the role of many TFs is yet to explore. In this review, we summarize the role of different stress-responsive TFs with respect to biotic and abiotic stresses. Further, challenges and future opportunities linked with TFs for developing climate-resilient crops are also elaborated.

Stakeholder input into the decision-making process when developing public health programs and policies is crucial. This article presents an innovative approach, involving online participation with a wide group of stakeholders located in different geographic locations, for policy consensus by research methodology. The results of the project have been used to propose assumptions regarding a strategy for preventing blood-borne diseases in Poland. The research was conducted iteratively using a multi-stage qualitative methodology to explore risk assessment involving blood-borne infections. The final output of the entire project is a list of key problems/challenges and solutions associated with medical and nonmedical services that are connected to the breakage of tissue continuity. Qualitative research is rare in risk assessment as priority is usually given to statistical data and end-points (quantitative studies ). Statistical data on health risk allows to assess the health implications, while the methodology applied also allowed diagnosis of the processes leading to these effects. In addition to policy preparation for blood-borne illnesses, the methodology employed in the study can also be used to successfully explore other areas of public health policy decisions.

Abstract: Purpose – In this article we lay out the change management practices adopted by financial firms in small states within the Eurozone. We determine whether these organisations have the ability to identify triggers for change (Red Flags) and subject them to eight thematic elements to understand whether management practices can continue to exist and support operational environments, even when unexpected circumstances affect their day to day operations and processes. In doing this we examine the extent to which the eight thematic elements from the model designed by Dalli Gonzi, (2019) (The Dali Model) can assist organisations in risk identification and business continuity planning. Design/methodology/approach – A self-administered questionnaire purposely designed for this study was administered to personnel working in internal controls within financial institutions of small Eurozone states. The participants were asked to grade statements using a 5-point Likert scale, ‘1’ being ‘totally disagree’ and ‘5’ being totally agree’ to the statement posed under the thematic elements forming the basis of the Dali Model. Findings – Factor analysis provided support for the eight hypothesised dimensions of the decision-making model: connection, capacity, governance, network, policy, training, process improvement, standards. Originality/value – The study provides a better understanding and support of “best practice” in change management through an understanding and assessment of the eight factors that are the basis of this model. It addresses practical recommendations to ensure application to a wider frame of use.

Lean is one of the systematic approach to achieve higher value for organizations through eliminate non-value-added activities. It is an integrated set of tools, techniques, and principles designed to optimize cost, quality and delivery while improving safety. In Vietnam, industry waste management and treatment has become serious issue. The aim of this research is to present the effective of Lean application for industrial wastes collecting and delivery improvement. Through a case study, this paper showed the way of Lean tools and principles applied for wastes management and treatment such as Value Stream Mapping, Pull system, Visual Control, and Andon.... to get benefit on both economic and environment. In addition, the results introduced a good experience for Vietnamese enterprises in cost saving and sustainable development in waste management.

Mungbean [Vigna radiata (L.) Wilczek] in Australia has been transformed from a niche opportunistic crop into a major summer cropping option for dryland growers in the summer-dominant rainfall regions of Queensland and New South Wales. This transformation followed stepwise genetic improvements in both grain yields and disease resistance. For example, more recent cultivars such as ‘Crystal’, ‘Satin II’ and ‘Jade-AU‘ have provided up to a 20% yield advantage over initial introductions. Improved agronomic management to enable mechanised management and cultivation in narrow (<50 cm) rows has further promised to increase yields. Nevertheless, average yields achieved by growers for their mungbean crops remain less than 1 t/ha, and are much more variable than other broad acre crops. Further increases in yield and crop resilience in mungbean are vital. In this review, opportunities to improve mungbean have been analysed at four key levels including phenology, leaf area development, dry matter accumulation and its partitioning into grain yield. Improving the prediction of phenology in mungbean may provide further scope for genetic improvements that better match crop duration to the characteristics of target environments. There is also scope to improve grain yields by increasing dry matter production through the development of more efficient leaf canopies. This may introduce additional production risks as dry matter production depends on the amount of available water, which varies considerably within and across growing regions in Australia. Improving crop yields by exploiting photo-thermal sensitivities to increase dry matter is likely a less risky strategy for these variable environments. Improved characterisation of growing environments using modelling approaches could also better define and identify the risks of major abiotic constraints. This would assist in optimising breeding and management strategies to increase grain yield and crop resilience in mungbean for the benefit of growers and industry.

The Atlantic Canada Together Enhancing Acute Stroke Treatment (ACTEAST) project is a Modified Quality Improvement Collaborative (mQIC) designed to improve ischemic stroke treatment rates and time-based efficiency in Atlantic Canada. This study specifically evaluates the implementation of the mQIC in Nova Scotia using qualitative methods. The mQIC spanned six months and included two Learning Sessions, multiple webinars, and a per-site virtual visit. Each session was followed by an action planning period to guide implementation efforts over the following 2-4 months. The Consolidated Framework for Implementation Research (CFIR) was utilized to develop a pre-tested, semi-structured interview guide, which aimed to uncover barriers and facilitators to mQIC implementation. Interviews were conducted with 14 healthcare professionals, generating 454 references that were coded into 28 CFIR constructs. Notably, 84% of these references were positively framed as facilitators. Despite this, significant barriers were identified, including resource availability, competing priorities, communication challenges, and difficulties engaging key stakeholders. Some barriers were particularly prominent during specific phases of implementation. The study findings offer valuable insights into the implementation of quality improvement initiatives in stroke care. They underscore the importance of recognizing and addressing context-specific barriers, while also leveraging identified facilitators to drive successful implementation and ultimately improve patient outcomes.

The Range–Doppler (R-D) model is extensively employed for the geometric processing of Synthetic Aperture Radar (SAR) images. Refining the sensor motion state and imaging parameters is the most common method for achieving high-precision geometric processing using the R-D model, comprising a process that involves numerous parameters and complex computations. In this study, we introduce a novel approach to improve the positioning accuracy of the R-D model, implementing a low-order polynomial to compensate for the original imaging errors without altering the initial positioning parameters. We also design low-order polynomial compensation models with different parameters. The models are evaluated on various SAR images from different platforms and bands, including spaceborne TerraSAR-X and GF3-C images, manned airborne SAR-X images, and unmanned aerial vehicle-mounted miniSAR-Ku images. Furthermore, image positioning experiments involving the use of different polynomial compensation models and various numbers and distributions of Ground Control Points (GCPs) are conducted. The experimental results demonstrate that geometric processing accuracy comparable to that of the classical rigorous positioning method can be achieved even when applying only an affine transformation model to the images. Compared to classical refinement models, however, the proposed image-compensated R-D model is much simpler and easy to implement. Thus, this study provides a convenient, robust, and widely applicable method for the geometric positioning processing of SAR images, offering a potential approach for the joint-positioning processing of multi-source SAR images.

This qualitative study investigates the adoption of Lean Principles in Supply Chain Management (SCM), aiming to explore the motivations, challenges, and outcomes associated with Lean implementation across diverse organizational contexts. Through semi-structured interviews and thematic analysis, insights were gleaned from stakeholders involved in SCM processes, revealing the critical role of organizational culture, leadership commitment, and strategic alignment in driving successful Lean initiatives. The findings underscore the importance of fostering a culture of continuous improvement, where employees are empowered to proactively identify and address inefficiencies. Leadership emerged as pivotal in setting the tone, providing resources, and championing Lean initiatives, while strategic alignment ensured integration with broader organizational goals and objectives. Operational practices and processes were central, highlighting the need for customization and contextual adaptation in Lean implementation. Despite the potential benefits, the outcomes and impact of Lean adoption varied depending on factors such as organizational maturity and industry context. The study also revealed broader cultural and organizational changes catalyzed by Lean adoption, fostering innovation, collaboration, and adaptability. In summary, this study contributes to our understanding of Lean adoption in SCM, offering practical insights for organizations seeking to enhance efficiency and competitiveness in today's dynamic business landscape.

The purpose of this research is to examine the benefits and limitations of implementation of novel digital academic advising systems using automated collection and reporting processes for ABET student outcomes data based on principles of authentic OBE for effective developmental advising. We examine digital developmental advising models of undergraduate engineering programs in two universities that employ customized features of the web-based software EvalTools® - Advising Module based on assessment methodology incorporating the Faculty Course Assessment Report, Performance Indicators and hybrid rubrics classified according to the affective, cognitive and psychomotor domains of Bloom’s learning model. A case study approach over a six-year period is adopted for this research. The two case studies present results of samples of developmental advising activity employing sequential explanatory mixed methods models using a combination of quantitative and qualitative analyses of a) detailed students’ outcomes and Performance Indicators information; and b) self-evaluation of their professional development and lifelong learning skills. The findings of this study show that digital advising systems employing the Faculty Course Assessment Report using Performance Indicators and hybrid rubrics can provide comprehensive and realistic outcomes data to help both developmental advisors and students easily identify the specific cause of performance failures, implement practical recommendations for remedial actions and track improvements. Inherent strong skills can also be identified in academically weak students by observing patterns or trends of relatively better performing outcomes to reinforce natural affinity for learning specialized competencies and pursue related and successful career paths.

This study investigates the efficiency of BEAM (Biologically Enhanced Agriculture Management) inoculant, derived from compost produced under Dr. David Johnson-Su's composting technique, in promoting plant growth. A winter mix of pasture comprising Oats, Tetila, unhulled Couch, and Haifa was used as the test crop. Seeds were soaked in BEAM inoculant, water (control), and a competitor product 'Companion.' Results revealed significant enhancements in germination rates, foliage growth, and root development in the BEAM-treated group compared to controls. Further research aims to identify the microbial components of BEAM and explore its potential as a suppressant for fusarium species in orchards.

This study aims to explore the associations between pediatric adverse events (PAEs) and hospital and patient characteristics within the inpatient hospital setting, focusing solely on the framework of pediatric quality indicators (PDIs) from the Agency for Healthcare Research and Quality (AHRQ). Specifically, the study focuses on NQI 03 Neonatal Blood Stream Infection (NBSI). The analysis utilizes discharge data from the Healthcare Cost and Utilization Project (HCUP) Kids’ Inpatient Databases (KID) for the year 2019. Through this analysis, the study seeks to answer research questions regarding associations between hospital characteristics and patient characteristics with NQI 03. The methodology employs bivariate and multivariate logistic regression models to analyze patient-level encounters of NBSI. The results indicate that smaller, rural, and non-teaching hospitals exhibit significantly lower odds of NQI 03 compared to large hospitals. Various individual factors such as gender, age, race, service lines, payment sources, and major operating room procedures also demonstrate differing levels of significance in relation to NQI 03, warranting further investigation. This study provides contextual expansion on the findings and offers valuable insights into PAEs in the inpatient hospital setting, specifically focusing on NBSI within the PDIs framework. It highlights areas for developing evidence-based interventions and guidelines for clinicians and policymakers. Ultimately, the findings contribute to the growing understanding of factors influencing NBSI and emphasize the importance of targeted strategies for improving pediatric patient safety.

The development of modern genomic tools has sped up the breeding program of food crops. More recently, genomic resources are being developed for tropical forages and will be key resources for developing climate resilient high yielding forage varieties. In this study, we present a genome-wide association study for biomass yield and feed quality traits in buffel grass (Cenchrus ciliaris L. aka Pennisetum ciliare L.,). Genome-wide markers generated using the DArTSeq platform and mapped onto the reference genome of Setaria italica were used for the genome-wide association study. The results revealed several markers associated with biomass yield and feed quality traits. A total of 78 marker trait associations were identified with R2 values ranging from 0.138 to 0.236. The marker trait associations were distributed across different chromosomes. Of these associations, the most marker trait associations (23) were observed on Chr9, followed by Chr5 with 12. The fewest number of marker trait associations were observed on Chr4 with 2. In terms of traits, 17 markers were associated with biomass yield, 24 with crude protein, 26 with TDN, 14 with ADF, 10 with NDF and six with DMI. Twenty of the identified markers were associated with at least two traits. The identified marker trait associations provide a useful genomic resource for future improvement and breeding of buffel grass.

Calcium and magnesium are important not only for human health, but also for reducing problems related to the corrosive and aggressive effects of soft water on drinking water distribution materials. Experimental and mathematical modeling of the recarbonization process aimed at increasing the content of these biogenic elements in water was carried out using the novelty of a continuous laboratory and pilot scale fluidized bed reactors. Water remineralization using half-calcined dolomite (HCD) and carbon dioxide was used. The influence of operating conditions Q(CO2), freshwater inflow and HCD dose on quality indicators of treated drinking water (c(Ca2+), c(Mg2+), c(Ca2++Mg2+) and Ca/Mg) was studied. The results show that the concentration of Mg2+ is more significantly affected by the amount of HCD in the system and the flow of CO2. The influence of freshwater inflow on the Mg2+content is to a lesser extent. At a constant CO2 flow, therefore, as the tap water inflow increases, the Ca2+ content decreases and the Mg2+ content increases, which has results in a decrease in the Ca/Mg molar ratio. However, the Ca/Mg ratio can be effectively controlled by adding an appropriate amount of HCD at certain time intervals. Overproduction of ions is easily controlled by CO2 flow.

In the context of digital empowerment, the digital literacy level of tea farmers has a significant impact on the intelligent development and transformation of the tea industry. This study extends the original model of UTAUT theory by introducing Personal innovativeness theory and Self-efficacy theory, and constructs a new model to explore the influencing factors of moderate scale tea farmers' digital literacy improvement behavior. There are a total of 22 research hypotheses. Using structural equation modeling and collecting questionnaire data for analysis, the following research results were obtained: (1) Performance expectancy, social influence, effort expectancy, personal innovativeness and self-efficacy all significantly positively affect the willingness of tea farmers to improve their digital literacy, and then according to the path coefficient, in descending order, social influence (0.226)>self-efficacy (0.224)>effort expectancy (0.178)>performance expectancy (0.157)> personal innovativeness (0.155); (2) Facilitating condition and willingness to improve digital literacy have a significant positive impact on tea farmers' digital literacy improvement behavior，and then from the size of the path coefficient, the willingness to improve (0.271)>facilitating condition (0.106); (3) The willingness of tea farmers to improve their digital literacy plays a complete mediating role between personal innovativeness and self-efficacy on their digital literacy improvement behavior, and partially mediates between performance expectancy, social influence, and effort expectancy on their digital literacy improvement behavior, and according to the proportion of indirect effects, the order is effort expectancy (27%), performance expectancy (47%), and social influence (49%); (4) The gender and age of tea farmers have a significant positive moderating effect on the impact of performance expectancy on the willingness to improve digital literacy; age and experience have a significant positive moderating effect on the impact of effort expectancy on the willingness to improve digital literacy; the age of tea farmers has a significant positive moderating effect on the improvement of digital literacy behavior through facilitating condition. This study extends the applicability of the UTAUT theoretical model and proposes strategies to improve the digital literacy of tea farmers, providing practical guidance for tea farmers to improve their digital literacy and providing reference for research related to farmers' digital literacy.

Abstract: The diffusion of competition under the coexistence of multi-generation products has become one of the important challenges faced by enterprises in their daily and sustainable operations. At the same time, the competition between different brands has intensified the difficulty and complexity of decision-making in the process of multi-generation product operation, Therefore, based on the Norton-Bass model diffusion process, this paper introduces two marketing variables, dynamic price and quality level, builds a multi-generation product diffusion model under the dual-brand competition, and analyzes the impact of the company's revenue on the launch time to market, pricing, quality or technical level. By using system dynamics (SD) method, From the perspective of strong brand and weak brand enterprises, the competition diffusion model is built and simulated. The simulation shows that: i) When enterprises have the same brand competitiveness, reducing the pricing level cannot obtain more revenue, but diminish the overall revenue of the industry; Raising the pricing level can get more revenue, but also improve the revenue of competitors. ii) When the competitive strength of enterprises is different, the strong brand tends to maintain a stable pricing on the basis of improving the quality level, or slightly raise the price. Weak brands tend to raise the pricing of new products significantly on the basis of improving the quality level. iii) The launch time to market decision of new product is influenced by the degree of product quality upgrade. Therefore, the frequency of releasing new products should trade-off against the degree of technological upgrading of product quality. This paper provides the theoretical basis and new insights for the new product launch and operation decision of enterprises.

When drilling oil and gas wells, hole cleaning efficiency is crucial, particularly in the curved or severely deviated sections. Although many hole-cleaning procedures and models have been developed, most of them have substantial limitations or are difficult to apply in real time. This study aimed to develop a model for the hole cleaning index (HCI) that could be integrated into the drilling operations to provide an automated and real-time evaluation of deviated drilling hole cleaning. The new model herein was developed based on the mechanical drilling parameters, enhanced estimated drilling fluid properties, and cuttings characteristics. This HCI model was validated and tested in the field, as it was applied when drilling 12.25”-intermediate directional sections in two wells with a total length of approximately 2000 ft each. The integration of the HCI helped to attain a much better well drilling performance (50% enhancement) and mitigation of potential problems like pipe sticking and the slower rate of penetration. Since the developed index incorporates the changes in wellbore geometry and other spontaneous field data, the new model could be utilized for real-time optimization and intermediate interventions by drilling teams, unlike commercial software tools which are only useful during the planning phase. For this reason, the HCI can be linked to the driller's control panel to provide timely evaluation and corrective measures related to hole cleaning.

Achieving eco-efficiency in agriculture production at low environmental costs is key to sustainable agriculture. Using the DEA-SBM model, this study evaluated the agricultural eco-efficiency of the 77 counties and districts in China’s Jiangsu province from 1999 to 2018 and analyzed its spatio-temporal evolution pattern and influencing factors. The mains conclusions were as follows: (1) The overall agricultural eco-efficiency and its decomposition terms, pure technology efficiency and scale efficiency, exhibited a fluctuating downward trend. The regional inequality in agricultural eco-efficiency had been widening and exhibited a strong positive spatial association. (2) The agricultural eco-efficiency in Jiangsu province presented a “high south and low north” spatial pattern. High-level agricultural eco-efficiency areas were in the Taihu Plain in Sunan, while low-level agricultural eco-efficiency zones are distributed across Subei City. The High-High-type spatial association pattern is concentrated in the Suzhou-Wuxi-Changzhou region, while the Low-Low areas are mainly in the coastal regions of Subei and Suzhong. (3) The spatial pattern of PTE and SE generally exhibited a “high south and low north” distribution. Areas with positive growth in agricultural eco-efficiency, PTE, and SE, were situated in Xuzhou, Nanjing city, and the bordering regions between Yangzhou and Huai’an, and Changzhou and Wuxi. (4) The excessive redundant use and application of pesticides, chemical fertilizer, agricultural diesel, labor, land, and agricultural carbon emission have been the primary factor affecting Jiangsu's agricultural eco-efficiency. Irrigation had also signficantly impacted agricultural eco-efficiency, while mechanical power and agricultural film had minimal effect. The majority of counties and districts in Subei, Suzhong, and Ningzhen Yang Hilly region have issues regarding their excessive usage of chemical fertilizer, pesticide, chemical fertilizer, agricultural diesel, labor, and land. The findings of this study can contribute towards a better understanding of agricultural eco-efficiency and spatial association effect and can help policymakers increase agricultural eco-efficiency.

Background/Objectives: A blood culture (BC) care bundle is aimed at decreasing BC contamination rate. This study examined prospectively the effect of a care bundle on BC contamination rates in a high workload ICU. Methods: We performed a before-after study in a general ICU, from January 2018 to May 2019. Blood culture sets were classified as positive, contaminated, indeterminate and negative. We used bivariate and interrupted time series analysis to assess the effect of the intervention and factors associated with contamination rates. Results: During the study, a total of 4236 BC vials were collected. BC Contamination rate decreased significantly after the intervention from 6.2% to 1.3%. Incidence rate of contaminated BC sets was significantly lower in the POST phase: 0.461 vs 0.154 BC sets per 100 ICU bed-days. Overall compliance with the BC care bundle increased from 3.4% to 96.9%. Conclusions: The care bundle was effective in reducing BC contamination and improving several quality indicators in our setting. The indeterminate BC rate is an important problem, and we suggest that it should be included in BC quality indicators. : The BC care bundle implementation was effective in reducing BC contamination rate, although its long-term effect was not assessed.

In the intricate landscape of software development, the distinction between average and exceptional outcomes often hinges on the approach taken by the engineers involved. This paper explores the core aspects that characterize responsible and professional software engineering, emphasizing the importance of stakeholder engagement, innovative problem-solving, and adherence to standards and best practices. Through detailed real-life examples, we illustrate how professional engineers ensure the creation of robust, efficient, and adaptable software solutions. Additionally, the paper delves into advanced strategies for enhancing database security, including the implementation of Sealed Secrets in Kubernetes environments, continuous improvement, and future enhancements. The goal is to provide a comprehensive understanding of professional software engineering practices and their impact on delivering superior value to projects and organizations.

This paper proposes training improvement methods of artificial neural networks (ANN) trajectory predictors. First, a dynamic power system time-series trajectory is split into several different segments to simplify the original ANN training problem. Moreover, the time-derivative of the trajectory is included to obtain an augmented loss function. Compared to previous studies which mainly focused on increasing the prediction accuracy, the aim of these novel techniques is to reduce the computational burden where the ANN output performance is still acceptable. The effectiveness of the developed methods is validated based on the WSCC three-machine nine-bus and IEEE 39-bus system models. The mean absolute error (MAE) and trajectory prediction results are analyzed, in which the numbers of neurons, hidden layers, and training epochs are constrained during the ANN training process. Rotor-angle difference between generators and the system frequency are investigated as the dynamic trajectories of the power system models. It is revealed that when the ANN architecture and epochs are constrained, the MAE results can be reduced, and the ANN training results can better reflect the original trajectory using the improvement approaches.

Concern about the planet's future has motivated governments around the world to adopt policies that promote more responsible energy consumption. Reducing emissions of the principal cause of climate change man-made greenhouse gases requires greater system efficiency and the utilization of renewable energy sources. The generation of electricity is the single largest source of hazardous pollutants, followed by the transportation sector. This is true due to the extreme reliance on petroleum and its derivatives that these industries have. Electric mobility is receiving more attention from businesses, governments, and academic institutions as a means to reduce the negative impacts of current energy consumption. Without measures to address common technical issues, electric vehicles would strain electrical infrastructure. In order to determine the best strategy for switching operations and feeder reconfiguration, this research presents a helpful hybrid genetic algorithm particle swarm optimization (HGAPSO) method. Meet transmission limits while decreasing real power losses and enhancing the system's bus voltage profile. The effects of HGAPSO on power losses and voltage distributions in the network are analyzed. Then, a report is produced contrasting GA and PSO. This cross-breeding of GA and PSO led to HGAPSO. This important problem can be solved more effectively with the use of new or improved algorithms. To find the optimal reconfiguration and properly rearrange transmission network interconnection, it employs a plethora of heuristic optimization algorithms. The objective is to limit bus voltage variations while maintaining the system's radial topology and minimizing power usage. The reliability and performance of the procedure were evaluated using MATLAB's IEEE 33-bus communication network. The outcomes demonstrate the effectiveness of the proposed technique, which cuts down on power waste during standalone runs and speeds up the processing time.

To study the feasibility and effect of compounding lignin and its derivatives to improve expansive soil, the physical properties, mechanical properties, and microstructure of the improved soil mixed with calcium lignosulfonate alone, calcium lignosulfonate and lignin fibers were investigated through indoor experiments and electron microscope scanning. Select samples with better performance for water stability tests, and discuss the improvement mechanism of expansive soil by combining macroscopic mechanical changes with microstructural characteristics. The research results show that the addition of calcium lignosulfonate can reduce the water content of the soil and enhance its strength of the soil. The overall performance is the best when the calcium lignosulfonate content is 3%. 3% calcium lignosulfonate compounded with 1.5% lignin fiber has the best all-around performance; the composite improved soil has a better pore-filling effect, the whole is more compact, and the connection between particles significantly enhances the strength, which greatly inhibits the development of cracks good water stability. Lignin and its derivatives compound improved expansive soil have better effect than traditional improvement methods, and have no pollution to the environment, which can provide a particular reference for engineering practice

To study the feasibility and effect of compounding lignin and its derivatives to improve expansive soil, the physical properties, mechanical properties, and microstructure of the improved soil mixed with calcium lignosulfonate alone, calcium lignosulfonate and lignin fibers were investigated through indoor experiments and electron microscope scanning. Select samples with better performance for water stability tests, and discuss the improvement mechanism of expansive soil by combining macroscopic mechanical changes with microstructural characteristics. The research results show that the addition of calcium lignosulfonate can reduce the water content of the soil and enhance its strength of the soil. The overall performance is the best when the calcium lignosulfonate content is 3%. 3% calcium lignosulfonate compounded with 1.5% lignin fiber has the best all-around performance; the composite improved soil has a better pore-filling effect, the whole is more compact, and the connection between particles significantly enhances the strength, which greatly inhibits the development of cracks good water stability. Lignin and its derivatives compound improved expansive soil have better effect than traditional improvement methods, and have no pollution to the environment, which can provide a particular reference for engineering practice.

Focusing geophysics to improve recovery factor of hydrocarbon reservoirs adds value and contributes toward ZERO carbon footprint by increasing the recovery factor by of 30-40 % and thus reducing the cost/carbon emission per produced barrel. Thus, the Enhanced Oil Recovery (EOR) market is expected to grow more than 3.5% annually. This will be even more fueled by the Green-House-Gas (GHG) reduction and subsequent CO2 injection into the reservoirs as they are being produced. Presently, geophysics only ac-counts for a small percentage of this market, thus its growth is inevitable since more deterministic observation lead higher operating efficiency. Imaging the fluids (hydro-carbon, water, and CO2) is a key component to optimized production and injection. We designed a novel electromagnetic (EM) acquisition system that combines mul-ti-physics fluid imaging and acquires surface and borehole data with high fidelity. Borehole calibration is needed to upscale reservoir data and parameters to measurement scale. Multiple electromagnetic methods are used as well as microseismics in one layout for Exploration and Production (E & P) problems. Multi-components in electromagnetics allows resolving oil and water-bearing zones equally well while achieving the best ac-curacy suitable for repeat measurements. Because sedimentary basins are intrinsically anisotropic, considering 3-dimensional anisotropy is essential from measurement and 3D modeling viewpoint. Thus, the results have the better subsurface images. Here, we combine hardware design, methodology, 3D modeling, processing, and interpretations into an integrated technology and demonstrate the success with verifiable case histories.

This study presents a novel approach to enhance Large Language Models (LLMs) like Alpaca by dynamically integrating real-time information. This method addresses the issue of content hallucination and data relevancy by automatically collecting and integrating current data from credible sources into model prompts. Experiments show a significant improvement in accuracy and a decrease in content hallucination, with a manageable increase in response time. The research underscores the potential of real-time data integration in making LLMs more accurate and contextually relevant, setting a foundation for future advancements in dynamic data processing in AI.

Wheat (Triticum aestivum L.) breeding programs can take over a decade to release a new variety. However, new methods of selection such as genomic selection (GS) must be integrated to decrease the time it takes to release new varieties to meet the demand of a growing population. The implementation of GS into breeding programs is still being explored, with many studies showing its potential to change wheat breeding through achieving higher genetic gain. In this review, we explore the integration of GS for a wheat breeding program by redesigning the traditional breeding pipeline to implement GS. We propose implementing a two-part breeding strategy by differentiating between population improvement and product development. The implementation of GS in the product development pipeline can be integrated into most stages and can predict within and across breeding cycles. Additionally, we explore optimizing the population improvement strategy through GS recurrent selection schemes to reduce crossing cycle time and significantly increase genetic gain. The recurrent selection schemes can be optimized for parental selection, maintenance of genetic variation, and optimal cross-prediction. Overall, we outline the ability to increase the genetic gain of a breeding program by implementing GS and a two-part breeding strategy.

Interstitial pneumonia is a general term for diseases in which inflammation occurs mainly in the interstitium of the lung. It is also pointed out that interstitial pneumonia reduces alveolar function and makes it difficult to take in oxygen through inspiration, causing symptoms such as dyspnea and coughing, which may eventually lead to respiratory failure. It is At present, there is no effective treatment and only conservative treatment exists. This time, we report that the therapeutic effect was confirmed in patients with interstitial pneumonia who took platinum palladium. In this case, improvement tendencies were observed in patients with Idiopathic pulmonary fibrosis (IPF), but improvement tendencies were also observed in many other lung diseases. In order to explore the mechanism, AMPK was measured at the in vitro level, and blood KL-6 and hydrogen peroxide levels in the patient were measured at the in vivo level. AMPK values were significantly elevated by more than 800%, KL-6 and hydrogen peroxide levels were also significantly decreased by drinking platinum palladium. Platinum palladium exhibits a strong antioxidant effect and is the only substance in the world that can approach all four types of active oxygen. In addition, when it was actually administered to patients, there were cases of dramatic improvement, and it was confirmed that KL-6, a parameter of lung function, decreased in 16 out of 32 patients, and furthermore, oxygen inhalation was completed. patients were also seen. Although the number of cases is expected to increase in the future, the substance is expected to be effective as a drug, although it is currently classified as a soft drink.