Symmetry-breaking is a phenomenon that is observed in various contexts, from the early universe to complex organisms, and is considered a key puzzle in understanding the emergence of life. The presence of enantiomeric amino acids and proteins highlights its critical role. However, the origin of symmetry-breaking has yet to be comprehensively explained, particularly from an energetic standpoint. This article explores a novel approach by considering energy dissipation, specifically lost free energy, as a crucial factor in elucidating symmetry-breaking. Through a thorough thermodynamic analysis applicable to enantiomeric systems at various scales, from elementary particles to aggregated matter like crystals, we present experimental findings that establish a direct correlation between non-equilibrium free energy and energy dissipation during formation processes. Results emphasize the pivotal role of energy dissipation not only as an outcome but as the trigger for symmetry-breaking. This insight suggests that understanding the origins of complex systems, from cells to living beings and the universe itself, requires a lens focused on non-equilibrium processes, ultimately facilitating the formation of non-racemic systems.

Only by understanding the ability to take third-person perspective can we begin to elucidate the neural processes responsible for one’s inimitable conscious experience. The current study examined differences in hemispheric laterality during a first-person perspective (1PP) and third-person perspective (3PP) taking task, when using Transcranial Magnetic Stimulation (TMS). Participants were asked to take either the 1PP or 3PP when identifying the number of spheres in a virtual scene. During this task, single-pulse TMS was delivered to the motor cortex of both the left and right hemispheres of 10 healthy volunteers. Measures of TMS-induced motor-evoked potentials (MEPs) of the contralateral abductor pollicis brevis (APB) were employed as an indicator of lateralized cortical activation. The data suggest that the right hemisphere is more important in discriminating between 1PP and 3PP. These data add a novel method for determining perspective taking and add to the literature supporting the role of the right hemisphere in meta representation.

This study is a synthesis of 159 articles that were selected for their relevance to comprehend key aspects of the Massive Open Online Courses (MOOCs) phenomenon, from a discourse analysis perspective. Since 2011, MOOCs are expanding worldwide so that the number of subscribers outpointed 101 million at the end of 2018. This paper explores the question whether the MOOCs are the embodiment of the global one-world classroom or whether, instead, they represent a low-cost alternative tailored to a segment that doesn´t have enough time or resources to attend a brick-and-mortar college. In addition, the review tackles the link between motivation and low completion rates. Finally, we discuss the need to devise better methods to assess the pedagogical value of MOOCs.

Background: Differentiating essential tremor (ET) and functional tremor (FT) remains challenging due to their overlapping clinical presentations. Objective: In this study, we aimed to elucidate the demographic and psychometric differences between the aforementioned tremor types to enhance the diagnostic accuracy and therapeutic strategies. Methods: In this prospective study, we included 96 patients diagnosed with ET or FT and analysed their related demographic data, clinical symptoms, and psychometric evaluation scores. Our statistical analysis involved Pearson’s chi-square tests, Fisher’s exact tests, and logistic regression to assess how the different variables impact tremor diagnosis. Results: Our study demonstrated a higher ET prevalence in males (p = 0.015). Furthermore, we demonstrated that patients with ET displayed a significantly lower body mass index and a lower age of onset compared to those with FT (p = 0.050 and p = 0.023, respectively). Our psychometric assessments revealed higher cognitive and body image scores in patients with ET, whereas those with FT scored higher on depression and anxiety scales. The misdiagnosis rate was 14.5%, emphasising the need for improved diagnostic criteria. Conclusions: We established specific demographic and psychometric distinctions between ET and FT, which could potentially benefit clinicians in making accurate diagnoses and tailoring treatment approaches. These findings support the inclusion of comprehensive psychometric evaluations into standard diagnostic procedures to better differentiate tremor types.

Using a sample of 103 surviving and non-surviving global bond funds over a long sample period of 1998 to 2022, we perform a comprehensive analysis of the funds under our modified Sharpe’s (1992) style analysis model. We find that dynamic style analysis is useful in explaining time-series and cross-sectional and in predicting future returns of global bond funds. The dynamic style analysis also allows us to examine asset allocation over time. The results show that, during 2001 to 2014, funds shift their allocations from intermediate-term bonds to world corporate bonds and from world corporate bonds to emerging market bonds in search of higher returns at the price of credit quality.

Given the many approaches to and definitions of gender responsive monitoring and evaluation (M&E) for health programs and interventions there is a lack of clarity on how to operationalize it including what to measure and how to measure it. We conducted a scoping review to understand what makes M&E gender responsive. We included 31 studies and conducted two rounds of extraction to delineate ways in which gender was integrated into M&E. Twelve articles described the use of theory to guide M&E though most were not related to gender. Twelve articles employed a gender score in data collection, most of which measured Likert scale responses related to gender equity. Even though most studies did not use a specific gender framework, most incorporated gender domains in their analysis. Seven studies used participatory methods in the design and implementation of M&E. Most studies conducted M&E on programs or interventions that were designed to be gender intentional and related to gender issues. Gender responsive M&E intentionally integrates gender into the M&E process, regardless of how gender-intentional the program or intervention is. Gender dimensions can be identified through gender theories, models, scores, and frameworks to inform tool development, data collection, analysis, and stakeholder engagement processes.

In this paper, we introduce a specialized, fully automated experimental arrangement designed for assessing the effectiveness of augmented and virtual reality technologies in healthcare setting and explore its design principles focusing on depth sensor characterization. The main goal of this project is to establish a robust benchtop platform for the quantitative evaluation of extended reality technologies in a controlled environment, emphasizing the practical assessment of augmented reality head-mounted devices. We outline a design concept and considerations for an experimental configuration aimed at creating a realistic testing environment. This apparatus comprises an observation platform mounted on a three-degree-of-freedom motorized system and a test phantom stage. Focusing on real-case scenarios, we utilized a range of sensors, including readily available range-sensing cameras and commercial augmented reality headsets, such as the Intel RealSense L515 LiDAR camera, mounted on the motion control system. The setup enabled automated data collection and facilitates controlled assessments and validation of various facets of augmented reality technologies, including object, hand, and head tracking, as well as static and dynamic image registration. This paper describes the system architecture, the process of automated data collection, and presents several evaluation studies conducted with this setup, providing insights into the quality and temporal noise associated with static or moving objects or observers in augmented reality applications.

Machine Learning is increasingly and ubiquitously being used in the medical domain. Evaluation metrics like accuracy, precision, and recall may indicate the performance of the models but not necessarily the reliability of their outcomes. This paper assesses the effectiveness of a number of machine learning algorithms applied to an important dataset in the medical domain, specifically, mental health, by employing explainability methodologies. Using multiple machine learning algorithms and model explainability techniques, the project provides insights into the model workings to help determine the reliability of the machine learning algorithm predictions. The results are not intuitive. It was found that the models were focusing significantly on less relevant features and at times, unsound ranking of the features to make the predictions. The paper therefore argues that it is important for research in applied machine learning to provide insights into explainability of the models in addition to other performance metrics like accuracy. This is particularly important for applications in critical domains such as healthcare. A future direction is to investigate methods to quantify the effectiveness of the machine learning models in terms of the insights from their explainability.

The evaluation of tourism sustainability has become of paramount importance for researchers and decision-makers to better protect tourist destinations, especially with the continuous increase in the number of tourists and visitors that alter the natural components of the environment and degrade ecosystems. Therefore, the use of geographical data is of great significance, particularly in environmental monitoring and land management, due to its ease of use and availability. However, calculating composite indices for sustainability involves several steps and requires a basic understanding of existing models. This article describes the development and design of a package of plugins in QGIS that serves as an easy-to-use tool for processing and automatically calculating economic, environmental, social indices, and the overall index of tourist sustainability. These plugins have been built in Python and designed as QGIS software plugins.

Ethics values for public officers are important for enhancing cultural ethical levels and keeping society free from low-level barbarian ethical values. Barbarian ethics values are reflected in animal behavior, as in some countries security agencies, and a culture based on strength is dominant, especially in political and military parties. This study gave insight into the change in security agency duties from fighting criminal activities to managing criminal activities. Keeping high-level ethical values is essential for enhancing the behavior of public officers and stakeholders in any official institution at a standard level. This study provides stakeholders with a clear vision of the different defects in public institutions and how to improve and avoid negative ethical issues. By identifying all aspects of public officers and deviations from ideal ethical values for public officers,the negative ethical values in security agency officers have been noticed for a long time due to feelings of injustice or unfairness in native citizens of any country, generating mafia-based institutions instead of police departments or security agencies in any country.

The recent introduction of foot-and-mouth disease virus serotype O (O/EA-2 topotype) in Southern Africa region has changed virus dynamics and the FMD vaccine requirements. This study describes an assessment of the heterologous antibody responses induced by O Manisa vaccine (three PD50/dose) against a representative O/EA-2 virus collected from an FMD outbreak in Zambia. Commercial and subsistence cattle herds were monitored following vaccination, where the benefits of employing a double vaccination schedule were compared to single-dose vaccination. Testing using virus neutralisation showed cattle that received two vaccine doses had a mean reciprocal log virus neutralisation titre of 2.02 (standard error [SE] = 0.16, n = 9) for commercial herds and 1.65 (SE = 0.17, n = 5) for subsistence herds , 56 days after first vaccination (dpv). Significantly lower mean titres were observed for single-dosed commercial herds (0.90, SE = 0.08, n = 9) and subsistence herds (1.15, SE = 0.18, n = 3), 56 dpv. Comparison of these results and those generated by solid-phase competitive ELISA by cohen’s kappa coefficient observed a statistically significant (ρ = 0.598 for 1:10 dilution, and ρ = 0.562 for 1:30 dilution of SPCE % inhibition results, p < 0.001 for both dilutions) positive correlation.

This study aims to explore the utilization of deep learning models, specifically the innovative Multi-Modal Contextual Fusion Convolutional Neural Network (MSHA), for the detection and diagnosis of Adrenocortical Carcinoma (ACC) using computed tomography (CT) images. The objective is to develop an accurate and reliable model that can assist in the effective detection and classification of ACC. The study utilizes a dataset comprising contrast-enhanced CT images from 53 confirmed ACC patients. The MSHA model is employed, which incorporates a combination of mixed-scale dense convolution, self-attention mechanism, hierarchical feature fusion, and attention-based contextual information techniques. Evaluation metrics are used to assess the performance of the MSHA model, and a comparison is made with other established models, including ResNet50, VGG16, VGG19, and InceptionV3. The evaluation of the MSHA model demonstrates high performance, with an accuracy of 96.65% and precision, sensitivity, specificity, and F1 score of 96.0%. These results highlight the MSHA model's capability in accurately detecting and classifying ACC. Furthermore, compared to other models, the MSHA model outperforms ResNet50, VGG16, VGG19, and InceptionV3, indicating its superior performance in ACC detection and diagnosis. The findings of this study suggest that the MSHA model holds significant potential in assisting healthcare professionals with the detection and diagnosis of ACC. With its advanced features and contextual fusion techniques, the MSHA model achieves high accuracy and performance. The results highlight the clinical significance of this novel model and its potential to improve patient management and outcomes in the detection and diagnosis of ACC using CT images.

This work deals with a systematic review of literature data concerning the theme of the integrated approach to occupational health and safety management, with particular reference to the programming of assistance plans, which guide the company's organizational choices also by aiming at the principles of the Total Worker Health. In the current regulatory framework on this issue, the UNI ISO 45001: 2018 standard assumes particular relevance, which defines the dynamic approach to occupational health and safety management systems, paying particular attention to external contextual factors that may influence corporate organizational decisions. The adoption of these systems is not mandatory, but allows companies to fulfill their duties in terms of health and safety at work, through an organizational approach aimed at awareness, involvement and participation of all subjects of the company prevention system, overcoming the phase of the mere technological and prescriptive approach, towards a holistic vision of prevention, which places the person at the center of preventive actions. In this context, the role of institutional networks and socio-economic partnerships assumes particular importance, in the activation of territorial assistance interventions to support companies for the improvement of risk management levels. To this end, the importance of verifying the effectiveness of assistance interventions emerges from the scientific debate, through the use of indicators such as quantitative ones for measuring the performance of all phases of the intervention with particular attention to the effects in terms of improved solutions developed.

To supply stable and high-quality power according to the advancement of industrial growth, electric power companies have performed maintenance of power facilities using various meth-ods. In the case of domestic power distribution facilities, there are limitations in performing di-agnostic management on all facilities owing to the large number of facilities; therefore, old fa-cilities are managed by the health index assessment method. The health index assessment com-prises only facility operation data and external environmental data and is managed only for four types of distribution facilities, including overhead/underground transformers and switchgear. In the case of extra high–voltage overhead wires, there is no standard for old replacement, despite the large number of wires, such as transformers and switchgear, and the large ripple effect of power failure in the event of a power outage. Therefore, in this paper, a health index assessment methodology for extra-high voltage overhead cables was developed. In this paper, we devel-oped an economic health index assessment methodology that additionally considers risk cost, which is different from the existing health index assessment method that uses only operational data and external environmental data to determine facility performance evaluation and aging replacement criteria. Using the health index assessment methodology developed in this paper, it is possible to expect a reduction in facility operating costs and investment costs from the per-spective of electric power companies through the replacement of old extra-high voltage over-head cables. In addition, from the perspective of consumers, it is expected to increase power re-liability and reduce the ripple effect of failure by preferentially replacing equipment with a high probability of failure.

The osteoarthritis (OA), the main cause of disability, is a chronic condition that most frequently affects older adults. As the population ages, the cost of treatment is placing pressure on the healthcare budget. As a result, it is imperative to evaluate the medicines' cost-effectiveness and the influence they have on health resource allocation. Hence, our study aims to summarize the cost and outcome of utilizing glucosamine in OA treatment. Authentic databases like Medline, Cochrane, and Scopus were adopted for the identification process up until July 2023. Our primary inclusion criteria centered on the economic evaluation of Glucosamine in OA treatments with provided the incremental cost-effectiveness ratio (ICER) at least. The Quality of Health Economic Studies (QHES) instrument was applied to grade the quality of the studies. A total of 7 qualified studies were selected and discussed the cost-effectiveness of glucosamine with or without other formulations. All of them demonstrated that glucosamine was cost-effective. There was an in-creasement of QALY when incorporating Glucosamine into conventional care. Moreover, Crystalline Glucosamine Sulfate (pCGS) was more cost-effective than the Other Formulations of Glucosamine (OFG). In overall, utilizing pCGS was more beneficial than OFG in terms both of cost and quality of life.

The research question in this article concerns how a competitive environment affects the learner (officer cadet's) personal leadership development and their relationship to their team and with future civilian foundations. More specifically, what are the possible learning effects of the “hidden” curriculum? This article investigates how a more than 250 years of leadership education provides new army officers with new skills and how such an environment may affect the cadets' leadership training. The paper builds on ethnographic data gathered during the three-year education program in most of the relevant practical locations and contexts. Findings regarding trust in their learning environment, cadets have reported scores of (Mean 2.83) on a 1 (low trust) to 5 (high trust) Likert scale, underpinning interviewdata regarding the lack trust in the academy and in their fellow cadets. Cadets also point out that competition has hindered their learning (Mean 2.50). These findings are interpreted in relation to possible negative effects stemming from internal competition and the evaluation system as a whole. The overall output of this system is a zero–sum game, and thus effects evaluative practices and learning processes. This study is of relevance to higher education officers responsible for designing learning environments.

Pulsed thermography is a vital technique in the nondestructive evaluation field. However, its data analysis can be complex and requires skilled experts. Advances in deep learning have yielded exceptional results, including image segmentation. Therefore, many efforts have been made to apply deep learning methods to data processing for nondestructive evaluation. Despite this, there is currently no public Pulsed thermographic dataset available for evaluating various spatial-temporal deep methods of segmenting pulsed thermographic data. This article aims to provide such a dataset and assess the performance of commonly used deep learning-based instance segmentation models on it. Additionally, the impact of the number of frames and data transformations on model performance is examined. The findings suggest that suitable preprocessing methods can effectively reduce the data size without compromising the deep models’ performance.

The world is facing a great technological transformation towards full autonomous vehicles, where optimists predict that by 2030, autonomous vehicles will be sufficiently reliable, affordable and common to displace most human driving. To cope with these trends, reliable perception systems must enable vehicles to hear and see all the surroundings, being light detection and ranging (LiDAR) sensors a key instrument for recreating a 3D visualization of the world in real time. However, perception systems must rely in accurate measurements of the environment. Thus, sensors must be calibrated and benchmarked before being placed on the market or assembled in a car. This article presents an Evaluation and Testing Platform for Automotive LiDAR sensors with the main goal of testing not only commercially available sensors, but also sensor prototypes currently under development in Bosch Automotive Electronics division. The testing system can benchmark any LiDAR sensor under different conditions, recreating the expected driving environment to which such devices are normally subjected. To characterize and validate the sensor under test, the platform evaluates several parameters such as the field of view (FoV), angular resolution, sensor’s range, etc. This project results from a partnership between the University of Minho and Bosch Car Multimedia Portugal, S.A.

Infectious bursal disease (IBD) is one of the most endemic diseases of commercial poultry in Ethiopia. Vaccination has been practiced as the major means of IBD prevention and control. A study was conducted to determine and compare the immunogenicity of two commercially available IBD vaccines in broiler chicken with maternally derived antibody (MDA). Day-old chickens of 270 were randomly assigned to three groups, group 1 vaccinated with brand 1 vaccine at 7^th and 19^th days and group 2 with brand 2 vaccine at 15^th and 22^nd days while group 3 were kept as control. Six chickens were also randomly selected and bled on day 1 for differential leukocyte count (DLC) and determination of MDA. Representative chickens from each group were bled at 24^th and 42^nd days of age for antibody titration using the indirect ELISA test. DLC scores were determined in the 1^st and 24^th days. The result revealed highly significant differences (P = 0.001) between group 1 and group 2 in DLC at 24^th days of age. Antibody titers against IBD were differed significantly (P = 0.02) at 24^th and 42^nd days of age in broilers vaccinated with brand 1 and brand 2 vaccines. It is concluded that although both brands of vaccine induce an adequate immunological response at the end of the experiment, brand 1 vaccine has shown significantly high antibody titers against the IBDV and DLC than brand 2.

Efficient quality evaluation provides support for the timely and good maintenance of the lane line marking. This paper searches and optimizes the back propagation(BP) network model which referred to the analytic hierarchy process(AHP) model structure, as well as the number of nodes in the middle layer network. Based on this, a comprehensive evaluation method of multi-dimensional lane line quality such as shape, color and contrast is established. The experimental results show that the parameters of the model are more simplified, and the scoring and classification results of lane lines are more accurate.

Cereals and their derivatives are the basis of human nutrition. However, cereals also contribute to the dietary exposure to toxic metals that may pose a risk. Strengthening food security and nutrition information is a high priority challenge for the Cape Verde Government. The toxic metals content (Cr, Ni, Sr, Al, Cd, Pb) has been determined in 126 samples of cereals and derivatives (rice, corn gofio, corn flour, wheat flour, corn, wheat) consumed in Cape Verde. Wheat flour samples stand out for registering the highest Sr (1.60 mg/kg), Ni (0.25 mg/kg) and Cr (0.13 mg/kg). The results show relevant Al levels (1.17 – 13.4 mg/kg) with its highest levels in corn gofio. The mean Pb average content in the cereals is 0.03 – 0.08 mg/kg with the highest level observed in corn gofio. The Al and Pb levels are lower in cereals without husks. A consumption of 100 g/day of corn gofio provide an intake of 1.34 mg Al/day (13.7% of the tolerable weekly intake established at 1 mg/kg bw/week) and 8 µg Pb/day (20% of the BMDL set at 0.63 µg/kg bw/day for nephrotoxic effects). The minimization of the dietary exposure of the Cape Verdean population to toxic metals is through the importation of higher quality cereals.

This study examines the improvement in coupled intercomparison project phase six (CMIP6) models against the predecessor CMIP5 in simulating mean and extreme precipitation over the East Africa region. The study compares the climatology of the precipitation indices simulated by the CMIP models with the CHIRPS dataset using robust statistical techniques for 1981 – 2005. The results display the varying performance of the general circulation models (GCMs) in the simulation of annual and seasonal precipitation climatology over the study domain. CMIP6-MME shows improved performance in the local annual mean cycle simulation with a better representation of two peaks, especially the MAM rainfall relative to its predecessor. Moreover, simulation of extreme indices is well captured in CMIP6 models relative to its predecessor. The CMIP6-MME performed better than the CMIP5-MME with lesser biases in simulating SDII, CDD, and R20mm over East Africa. Remarkably, most CMIP6 models are unable to simulate extremely wet days (R95p). A few CMIP6 models (e.g., NorESM2-MM and CNRM-CM6-1) depicts robust performance in reproducing the observed indices across all analyses. Conversely, OND season shows the overestimation of some indices (i.e., R95p, PRCPTOT), except for SDII, CDD, and R20mm. Consistent with other studies, the mean ensemble performance for both CMIP5/6 shows better performance due to the cancellation of some systematic errors in the individual models. Generally, the CMIP6 depicts improved performance in the simulation of MAM season akin CMIP5 models. However, the new model generation is still marred with uncertainty, thereby depicting substandard performance over the East Africa domain. This calls for further investigation of attribution studies into the sources of persistent systematic biases and a prerequisite for identifying individual models with robust features that can accurately simulate observed patterns for future usage.

The fast and flexible characteristics of badminton determine the necessity of its lunge, and fast lunge will have an important impact on the results of the game in actual combat. In lunge evaluation, the contact time to the ground is a key indicator. This article selects two middle-aged male badminton amateurs with similar body shape and age， but different skill levels as the research objects to carry out comparative experiments. The microseismic equipment is used to record the floor vibration which is caused by the running of badminton amateurs in sports. The microseismic signals of lunge are processed and analyzed by MATLAB software. And we evaluate the pro and cons of various time to touch the ground from amateurs with different skill levels. The research found that 1. Microseismic technology can detect the contact time to the ground. 2. High-level badminton amateurs have obvious advantages in the footwork contact time. Microseismic technology has a certain feasibility as a tool for evaluating the footwork contact time of badminton.

This study evaluates the historical mean surface temperature (hereafter T2m) and examines how T2m changes over East Africa (EA) in the 21^st century using CMIP6 models. An evaluation was conducted based on mean state, trends, and statistical metrics (Bias, Correlation Coefficient, Root Mean Square Difference, and Taylor skill score). For future projections over EA, five best performing CMIP6 models (based on their performance ranking in historical mean temperature simulations) under the shared socioeconomic pathways SSP2-4.5 and SSP5-8.5 scenarios were employed. The historical simulations reveal an overestimation of the mean annual T2m cycle over the study region with fewer models depicting underestimations. Further, CMIP6 models reproduce the spatial and temporal trends within the observed range proximity. Overall, the best performing models are as follows: FGOALS-g3, HadGEM-GC31-LL, MPI-ESM2-LR, CNRM-CM6-1, and IPSL-CM6A-LR. During the three-time slice under consideration, the Multi Model Ensemble (MME) project many changes during the late period (2080 – 2100) with expected mean changes at 2.4 °C for SSP2-4.5 and 4.4 °C for the SSP5-8.5 scenario. The magnitude of change based on Sen’s slope estimator and Mann-Kendall test reveal significant increasing tendencies with projections of 0.24°C decade-1 (0.65°C decade-1) under SSP2-4.5 (SSP5-8.5) scenarios. The findings from this study illustrate higher warming in the latest model outputs of CMIP6 relative to its predecessor, despite identical instantaneous radiative forcing.

Opening gated-communities (GCs) has been widely discussed for urban inclusion and revitalization. With the policies of opening GCs being promoted in China, quantitative and comprehensive evaluation of the potential benefits is heavily needed. Taking Shanghai as an example, this study quantifies and analyzes the accessibility benefits and risks of opening GCs with factors including GC types, opening levels, travel modes, and travel destinations considered. We found that (1) opening GCs can bring 50m+ accessibility gains to 17% and 52% of the residents in Moderately Opening (MO) and Completely Opening (CO) scenarios, respectively. (2) Cycling benefits more than walking in all cases and scenarios. (3) For different GCs, conventional GCs have fewer benefits in MO but more in CO than the newly-established one. For different facilities, trips to bus stations demonstrate the largest accessibility gains. (4) The accessibility benefit of a residential building is highly determined by its closeness to the gates and relative location in the block. (5) Only 1% and 5-7% of external trips may penetrate the opened communities in MO and CO scenarios, respectively, which are far less than both expectation and the benefits. These findings precipitate at least two policy implications in China.

The popularity of functional gummies has increased, which is evident from the growing line of functional gummies from almost every nutraceutical companies. Sensory evaluation serves the purpose of determining which brand of functional gummy would capture the largest market share. Texture profile analysis was used to determine the mechanical properties of functional gummies. The brands of functional gummies that came under the scope of this study were denoted as Brand A, B, C, D, E, F and G. Fourier Transform Infrared Spectroscopy was utilised to detect organic material and functional groups in the functional gummies. Texture profile analysis gave valuable insights into the gummies’ mechanical properties which are cohesiveness, springiness, hardness, gumminess, and chewiness. Amongst the gummies that were studied, Brand F gummy has the highest value of cohesiveness of 0.92. Brand A gummy has a high springiness value of 1.0. Brand B gummy possesses the highest value of hardness, gumminess and chewiness of 12 532.2 g, 7617.6 N, and 6256.8 J, respectively. Qualitative sensory evaluation reveals that Brand G gummy has the best aesthetic qualities in terms of colour and appearance. Brand B gummy tastes the best while brand A gummy claims the top spot for gumminess and chewiness. Overall, the respondents in this study preferred brand A gummy over other brands.

We report on an exploratory study conducted at a graduate school in Sweden with a humanoid robot, Baxter. First, we describe a list of potentially useful capabilities for a robot teaching assistant derived from brainstorming and interviews with faculty members, teachers, and students. These selected capabilities consist of reading, greeting, alerting, remote operation, clarification, and motion. Second, we present feedback on how the robot's capabilities, demonstrated in part with the Wizard of Oz approach, were perceived, and iteratively adapted over the course of several lectures, using the \EP tool. Third, we discuss observations and findings regarding the capabilities and the development process. Our findings suggest that using a social robot as a teaching assistant is promising using the chosen capabilities. We find that personalizing the capabilities and the role of embodiment are important topics to be considered in future work.

The explosive emergence of wireless technologies and standards, covering licensed and unlicensed spectrum bands has triggered the appearance of a huge amount of wireless technologies, with many of them coexisting in the same band. Unfortunately, the wireless spectrum is a scarce resource, and the available frequency bands will not scale with the foreseen demand for new capacity. Certain parts of the spectrum, in particular the license-free ISM bands, are overcrowded, while other parts, mostly licensed bands, may be significantly underutilized. As such, there is a need to introduce more advanced techniques to access and share the wireless medium, either to improve the coordination within a given band, or to explore the possibilities of intelligently using unused spectrum in underutilized (licensed) bands. Therefore, in this paper, we present a SDR based framework that can be employed to devise disruptive techniques to optimize the sub-optimal use of radio spectrum that exists today. Additionally, we describe two use cases for the proposed framework.

Optoelectronic devices are gold standard for 3D evaluation in clinics but due to the complexity of such kind of hardware and the lack of access for patients affordable, transportable and easy to use systems must be developed to be largely used in daily clinics. The Kinect^TM sensor presents various advantages compared to optoelectronic devices: price, transportability but also some limitations: (in)accuracy of the skeleton detection and tracking as well as the limited amount of available points that make 3D evaluation impossible. To overcome these limitations a novel method has been developed to perform 3D evaluation of the upper limbs. This system is coupled to rehabilitation exercises allowing functional evaluation while performing physical rehabilitation. To validate this new approach a double step method was used. The first step is a laboratory validation where the results obtained with the Kinect^TM have been compared with results obtained with an optoelectronic device, 40 healthy young adults participated in this first part. The second step was to determine the clinical relevance of such kind of measurement. Results of the healthy subjects were compared with a group of 22 elderly adults and a group of 10 chronic stroke patients to determine if different patterns can be observed. The new methodology and the different steps of the validations are presented in this paper.

Full-scale wind turbine technology has been widely developing in the recent years and condition monitoring techniques assist at the scope of making 100\% technical availability a realistic perspective. In this context, several retrofitting techniques are being used for further improving the efficiency of wind kinetic energy conversion. This kind of interventions is costly and, furthermore, the estimation of the energy enhancement is commonly provided under the hypothesis of ideal conditions, as for example absence of wakes between nearby turbines. A precise quantification of the energy gained by retrofitting is therefore precious in real conditions, that can be very different from ideal ones. In this work, three kinds of retrofitting are studied through the operational data of test case wind farms: improved start-up through pitch angle adjustment near the cut-in, aerodynamic blade retrofitting by means of vortex generators and passive flow control devices, extension of the power curve by raising cut-out and high wind speed cut-in. SCADA data are employed and reliable methods are formulated for estimating the energy improvement from each of the above retrofitting. Further, an insight is provided about wind turbine functioning under very stressing regimes, as for example high wind speeds.

To address the issue of traditional static evaluation models being unable to comprehensively analyse the performance of ultra-supercritical coal-fired units under varying loads, we propose a dynamic comprehensive evaluation model based on the improved Criteria Importance Through Inter-criteria Correlation (CRITIC) method and Entropy Weight Method (EWM). The comprehensive performance evaluation index system of ultra-supercritical coal fired units is constructed by examining the boiler performance, turbine performance, plant power performance, environmental performance, and flexible performance of coal powered units. The CRITIC and EWM methods are used to calculate the weights of the indicators, which are then combined with the static evaluation results. Using a dynamic comprehensive evaluation model, we analysed ultra-supercritical coal-fired units, taking into account time weight. This allowed us to obtain the comprehensive dynamic real-time evaluation value of the units under different loads. The research indicates that the dynamic comprehensive evaluation model, which uses an improved CRITIC and EWM, has significant advantages in improving evaluation accuracy, weight-balanced distribution, and generality. Provides more accurate, reasonable, and reliable evaluation results for practical decision making.

I present a personal account of self-organizing systems. As such, it is necessarily biased and partial. Nevertheless, it should be useful to motivate useful discussions. The relevant contribution is not my attempts at answering questions (maybe all my answers are wrong), but the steps towards framing relevant questions to better understand self-organization, information, complexity, and emergence. With this aim, I start with a notion and examples of self-organizing systems (what?), continue with their properties and related concepts (how?), and close with applications (why?).

The scientific fields of complexity, artificial life (ALife), and artificial intelligence (A.I.) share commonalities: historic, conceptual, methodological, and philosophical. Although their origins trace back to the 1940s birth of cybernetics, they were only able to properly develop as modern information technology became available. In this perspective, I offer a personal (and thus biased) account of the expectations and limitations of these fields, some of which have their roots in the limits of formal systems. I will use interactions, self-organization, emergence, and balance to compare different aspects of complexity, ALife, and A.I. Even when the trajectory of the paper is influenced by my personal experience, the general questions posed (which outweigh the answers) hopefully will be useful to align efforts in these fields toward overcoming --- or accepting --- their limits.

Self-healing materials research spans many academic disciplines and employs a wide range of methodologies. Some of the developed concepts are driven by the direct application of the materials. However, a deeper understanding of the basic mechanisms and principles of self-healing materials is still a challenging aim. Nature has mostly served as an inspiration for the development of new self-healing materials, and it will undoubtedly continue to be a significant source of inspiration for the creation of novel ideas. This review encompasses the principles of self-healing mechanisms based on the concepts of autonomous and non-autonomous procedures. Studies based on smart composite materials with autonomous self-healing properties are also included and discussed from two aspects of intrinsic or extrinsic abilities, taking into consideration their components and structures as well as the design of these composites. Finally, special attention is given to the application of the materials in several fields such as aerospace, automotive, marine, energy, medical and healthcare, military, and construction.

This study addresses the critical challenge of Speech Enhancement (SE) in noisy environments, where the deployment of Deep Neural Networksolutions on microcontrollers is hindered by their extensive computational demands. Focusing on this gap, our research introduces a novel SE method optimized for MCUs, employing a 2-layer GRU model that capitalizes on perceptual speech properties and innovative training methodologies. By incorporating self-reference signals and a dual strategy of compression and recovery based on the Mel scale, we develop an efficient model tailored for low-latency applications. Our GRU-2L-128 model demonstrates a significant reduction in size and computational requirements, achieving a 14.2× decrease in model size and a 409.1× reduction in operations compared to traditional DNN methods like DCCRN, without compromising performance. This advancement offers a promising solution for enhancing speech intelligibility in resource-constrained devices, marking a pivotal step in SE research and application.

The main consequence of radiation damage on a Silicon-Photomultiplier (SiPM) is a significant increase in the dark current. If the SiPM is not adequately cooled, the power dissipation causes it to heat up, which in turn affects its performance based on the temperature. In order to investigate this heating effect, experiments were carried out using a KETEK SiPM glued on an Al2O3 substrate, as well as HPK SiPMs that were either glued onto an Al2O3 substrate or a flexible PCB. The assemblies were connected either directly to a temperature-controlled chuck on a probe station or through layers of materials with well-defined thermal resistance. A DC-mode LED was used to illuminate the SiPM, and the resulting SiPM current was measured to determine the steady-state temperature. This temperature depended on the power dissipated in the multiplication region of the SiPM and the thermal resistance. This information can be utilized to adjust the SiPMs working point, taking into account the effects of self-heating. Similarly, this approach can be applied to packaged SiPMs that have an unknown thermal contact to a heat sink.

The evolution of sentence representation learning, especially with parse tree encoders, has shown remarkable progress. Traditional approaches predominantly rely on recursive encoding of tree structures, which impedes parallel processing capabilities. Additionally, these methods often overlook the significance of dependency tree arc labels. To overcome these limitations, we introduce the Syntax-Enhanced Transformer (SET), incorporating a novel dual-attention mechanism that integrates relation-focused attention alongside traditional self-attention. This design effectively encodes both dependency and spatial positional relationships within sentence dependency trees. Our approach innovatively incorporates syntactic information into the Transformer framework without compromising its inherent parallelizability. The SET demonstrates superior or comparable performance to contemporary methods across various sentence representation tasks, significantly enhancing computational efficiency.

This article is a scoping review analyzing advances in experimental studies on bacterial self-healing of concrete. From Scopus, ScienceDirect, Web of Science and Google Scholar search engine databases, 54 studies were selected for analysis, and an increasing trend of publications since 2015 was found, with India as the country with the largest research presence. Different ma-terials are used as replacement or admixture in concrete, such as fibers, particles and recycled material from construction waste. It was found that the most commonly used bacteria are Bacillus subtilis and Bacillus sphaericus, which can improve the strength of concrete by generating calcite and sealing cracks. In addition, it was found that the presence of materials such as fibers, ashes and construction recyclates can protect bacteria in an alkaline environment. The designs usually in-clude more than two experimental groups and a control. In summary, this study highlights the importance of bacterial self-healing in concrete and provides information on advances in this field of research.

This review article delves into the intricate psychology behind galivanting, absenteeism, and self-denial among college students. By conducting a meticulous analysis of relevant books, journals, and articles, key psychological factors come to light. The review examines the influence of exploration and identity formation, social motivation, coping mechanisms, lack of motivation or engagement, time management, and self-denial on these behaviors. By addressing gaps in the literature, it provides a deeper understanding of the phenomena at hand. The implications of this study extend to the development of interventions and strategies that address self-denial tendencies, promote effective time management, and foster a supportive learning environment. By shedding light on the intricate interplay of these factors, this paper opens doors for future research and targeted interventions, ultimately aiming to enhance academic engagement, reduce absenteeism, and support the overall well-being and success of college students.

Background: Nursing services provided by nurses are based on knowledge and competence in the field of nursing science developed in accordance with Client needs, scientific developments, and the demands of globalization. These health services include nursing services that are carried out responsibly, accountably, with quality, and safely by nurses who have obtained registration and permission to practice. Nursepreneur is innovation and courage to take risks and is ready to work hard to achieve goals with optimism. Which has important components namely: 1) quality, 2) role, 3) option and success. The post-pandemic new world, especially in the health care system, continues to grapple with the demands of costs to provide patient care and safety. By using the application of the nursing theory model. Purpose :. Assessing scientific studies on the application of evidence-based intervention in wound care using nursing theory, identifying the important role of telenursing in improving nursing services in Nerspreneurship, Method: literature study Conclusion: Telenursing in nursing focuses on providing nursing care through information technology, such as telephone, computers, and the Internet that can be used to improve treatment outcomes among older people, especially those with low literacy skills and low financial status (Esmaeilpour-BandBoni et al., 2020). The statement from the results of the study refutes that Telenursing is intended for patients who have higher education and middle and upper economic states.

Background: Indonesia is an archipelago with various cultured, will bee affects all aspects of people's lives, including beliefs related to health behavior and health care. One problem that needs serious attention is the elderly group because the elderly are a vulnerable group who have a high risk of experiencing health problems, such as anemia with hypertension, so they need good care management. The research objective was to determine self-management intervention for hypertensive elderly. Methods: This research is a literature review with five databases (Scopus, CINAHL, ScienceDirect, PubMed, Proquest), the study design used is an experimental, descriptive, cross-sectional, and review systematic, in March 2021. Guidelines for using JBI to measure quality and listing check out Prisma in this review guide. A feasibility study based on title, abstract, full text, and research methodology. The data analysis used narrative analysis based on the research findings. Results: Twelve articles met the predefined review inclusion criteria. The study found eight interventions for self-management in elderly hypertension, namely: 1) Knowledge of hypertension, 2) Regulation of physical activity, 3) Limitation of alcohol and cigarette consumption, 4) Sleep rest and stress management, 5) Diet and body weight management, 6) Blood pressure control, 7) Family and social support, 8) Adherence to therapy regimens. Conclusion: The conclusion of the study results obtained eight elderly self-management interventions, this done properly will affect compliance in optimizing the health of the elderly.

Background: Since the beginning of the 20th century, the importance of creating healthy work environments and promoting the health of workers in the healthcare sector to create Healthy and Resilient Organizations has been emphasized. In this context, self-esteem is an essential construct which influences health and healthy life styles, and therefore, the general wellbeing of nurses. The objective of this study was to analyze the mediating role of reasons for exercising in the effect that self-esteem has on uncontrolled eating by nursing professionals. Methods: The sample was made up of 1094 nurses who were administered the Rosenberg General Self-esteem Scale, the Goal Content for Exercise Questionnaire and the Three-Factor Eating Questionnaire-R18. Results: Bivariate correlation analysis and multiple mediation analysis showed that self-esteem has direct and indirect effects on uncontrolled eating. More so, self-esteem predicts doing physical exercise to improve one’s image, recognition and social affiliation, although the effects on uncontrolled eating were only significant through image. Conclusions: The results have important practical implications in the framework of Positive Occupational Health Psychology (POHP) as it emphasizes self-esteem, physical exercise and eating as essential aspects of the health and wellbeing of employees in the healthcare sector, highlighting the importance of creating organizations committed to promoting the psychosocial health of their workers.

We develop an optimized force-field for poly(3-hexylthiophene) (P3HT) and demonstrate its utility for predicting thermodynamic self-assembly. In particular, we consider short oligomer chains, model electrostatics and solvent implicitly, and coarsely model solvent evaporation. We quantify the performance of our model to determine what the optimal system sizes are for exploring self-assembly at combinations of state variables. We perform molecular dynamics simulations to predict the self-assembly of P3HT at ~350 combinations of temperature and solvent quality. Our structural calculations predict that the highest degrees of order are obtained with good solvents just below the melting temperature. We find our model produces the most accurate structural predictions to date, as measured by agreement with grazing incident X-ray scattering experiments.

Partial differential representation of self-similarity feature has been derived from notion of the homogenous function in general sense. This representation allows consideration of stochastic self-similar systems. As well as the partial differential representation allows consideration of Stochastic Partial Differential Equation.

Though Cyber Physical Systems (CPS) become very popular in last the decade, dependability of CPS is still a critical issue and related survey is rare. We try to spell out the jigsaw of technologies and figure out the technical trends of dependable self-managing CPS. This survey first recalls the motivation and the similar concepts. By analyzing four generic architectures, we summarize the common characteristics and related assurance technologies, and propose a more generic environment-in-loop processing flow of CPS and a formal interaction flow between physical space and cyber space. Further, the similarity between correctness and dependability is formally analyzed and the new five research questions of dependable self-managing CPS are presented. Then we review the critical technologies and related correctness verification & validation (V&V) methods, the architectures for dependable self-managing CPS. Further, the detail dependability management and V&V technologies are surveyed, which covers the areas of running-time fault management methods and whole life cycle V&V technologies, maintenance and available tool sets. For holistic CPS development, Modeling techniques and MDE (model driven engineering) based V&V methods are analyzed in detail. Then we complete the jigsaw of technologies and figure out the missing part. Further, we propose the technical challenges and the further direction. To our best knowledge, this is the first comprehensive survey on dependable self-managing CPS development and evaluation.

Postpartum depression is a significant health issue during the postpartum period and not only affects the woman but also has important repercussions for the newborn. Group support interventions during the postpartum period have proven effective in helping women cope with depression and improving breastfeeding rates. The aim of this study was to assess the effectiveness of a midwife-led breastfeeding support group intervention on breastfeeding rates, postpartum depression and general self-efficacy. This was a multicentric cluster randomized controlled trial with control and intervention groups and was not blinded. It was conducted in Andalusia (southern Spain) from October 2021 to May 2023. A total of 382 women participated in the study. Results showed a significant difference in exclusive breastfeeding rates at 4 months postpartum between the groups (p < 0.001). Additionally, there was a lower mean score on the Edinburgh Postnatal Depression Scale in the intervention group (12.49 ± 3.6 vs 13.39 ± 4.0; p = 0.044). Similarly, higher scores of general self-efficacy were observed among breastfeeding women at 2 and 4 months postpartum (p = 0.002 and p < 0.001, respectively). In conclusion, midwife-led breastfeeding support groups enhanced self-efficacy, prolonged breastfeeding and reduced postpartum depression 4 months after giving birth.

Background and Objective: Intimate relationships hold significant importance during emerging adulthood. This study aimed to investigate the critical determinants of perceived well-being in friendship relationships during emerging adulthood.Method: Using a quantitative approach, a sample of 726 undergraduate students from the Ferdowsi University of Mashhad were selected through convenience sampling. They completed the Interpersonal Behaviors Questionnaire (IBQ), the Compassionate and self-image goals scale (CSIGS), the Basic Need Satisfaction in Relationships Scale (BNS-RS), the Interpersonal Needs Questionnaire (INQ-10), Friendship Self-Regulation Questionnaire (SRQ-F), Interpersonal Behaviors Questionnaire-Self (IBQ-self), State Level Subjective Vitality Scale (SVS-SL), the Perceived Relationship Quality Component (PRQC), and the Basic Empathy Scale (BES). Data analysis was conducted using Partial Least Squares Structural Equation Modeling (PLS-SEM).Results: The results indicated that the critical determinants in predicting perceived well-being in friendship relationships were, in order, goals in friendship relationships, friendship self-regulation, perceived support of basic psychological needs by friends, satisfied basic psychological needs, frustrated psychological needs, and supporting the basic psychological needs of friends.Conclusion: The findings demonstrate that self-determination theory (SDT) provides a coherent framework for explaining perceived well-being in friendships.

The current article examined stoma self-care and health-related quality of life in patients with drainage enterostomy, describe clinical and sociodemographic variables and analyze the relations between all of them. Trained interviewers collected data using a standardized form that queried sociodemographic and clinical variables, collected from the electronic medical record, in addition to the Specific Self-Care for Ostomized Patients Questionnaire (CAESPO) and Stoma Quality of life (S-QoL) from January 2016 to January 2017. This was a multicenter, cross sectional study conducted in four hospitals of the province of Castellon (Spain) where 120 participants were studied. Significant differences were found in Self Care according to sex (p = .043); married participants show higher score (p < .01); also, significant differences according to work activity were observed (p < .01). Regarding the clinical variables, differences were observed according to the autonomy of care, the presence of complications in the stoma, the use of irrigation and the type of effluent (p < .01). We can highlight the importance of the skills related to self-care by ostomized patients has for a good level of quality of life related to health. In this learning process, the figure of the stoma therapist plays a very important role.

A smart precipitation estimation method based on FY-4B meteorological satellite data (FY-4B_AI) is proposed in this paper. This method spatiotemporally matches 125 features derived from multi-temporal and multi-channels of FY-4B satellite data with the precipitation at stations. Then a precipitation model using the Light Gradient Boosting Machine algorithm is constructed. Comparative results between FY-4B_AI and GPM/IMERG-L products for over 450 million station cases throughout 2023 shows that: 1) FY-4B_AI is superior to GPM IMERG-L in the average absolute error, root mean square error, relative error, correlation coefficient, probability of detection and critical success index. While in the mean error and false alarm rate, FY-4B_AI is slightly inferior to GPM/IMERG-L. 2) Evaluation of strong weather event applications reveals that both FY-4B_AI and GPM/IMERG-L can accurately represent the spatial distribution characteristics of precipitation, no matter in the southeast humid region or the northwest dry region. Notably, FY-4B_AI, due to its higher spatiotemporal resolution, provides a more detailed distribution of precipitation.

Tea (Camellia L.) falls into the family Theaceae, is a valuable commercial crop, and tea products made from its buds and young leaves are favored by consumers all over the world. The more common Thea plant is Camellia sinensis (C. sinensis), but its most important relative, Camellia taliensis (C. taliensis), is also utilized by locals in the area of cultivation to manufacture tea. In this investigation, C. taliensis (DL) and C. sinensis (QJZ) were characterized in terms of their agronomic traits, physicochemical indices, metabolomics, and transcriptomics. The leaf area of DL is larger than that of QJZ; the color of DL’s buds and leaves is yellowish-green, while that of QJZ’s is green. DL’s buds and leaves are more densely velvety than those of QJZ. The HPLC results indicated that the physicochemical contents varied considerably between the two samples, with DL having greater concentrations of EGCG and GABA than QJZ, while QJZ had remarkably higher concentrations of C, CA, and EGC than DL. A total of 2269 metabolites and 362,190,414 genes were positively identified, with the number of DAMs and DEGs being 1001 and 34,026, respectively. The flavonoids, phenolic acids, and alkaloid metabolites were dramatically different between the two tea group plants. Bioinformatics profiling revealed that the DAMs and DEGs of the two tea group plants interacted with each other and were involved in metabolic pathways including “biosynthesis of secondary metabolites”, “biosynthesis of amino acids”, “biosynthesis of cofactors”, “phenylpropanoid biosynthesis”, and “flavonoid biosynthesis”. Overall, these results provide statistical support for germplasm conservation and production for both C. taliensis and C. sinensis.

Background: Patients undergoing brain tumor resection experience changes to their neurocognitive abilities, many of which can be difficult to predict. We hypothesized that changes in brain connectivity could predict changes in neurocognitive functioning, demonstrating the potential for brain connectivity aware surgical planning to provide enhanced outcomes for patients. Methods: Patients underwent functional and diffusion MR scanning and neuropsychological testing before tumor resection and two weeks post-resection. Using this functional and diffusion imaging, we measured changes in the topology of the functional and structural graph networks, respectively. From the neuropsychological testing scores, we derived a composite score that describes a patient’s overall level of neurocognitive functioning. We then used a multiple linear regression model to test if structural and functional connectivity measures could predict changes in composite scores. Results: Twenty-one subjects completed imaging and neuropsychological evaluation both before and after surgery. The multiple linear regression model showed that changes in functional local efficiency were inversely correlated with changes in composite score (p

In this paper, we derive the distribution of eigenvalues for a 2×2 random confusion matrix stemming from a machine learning (ML) evaluation problem. Additionally, we present the distributions of both the matrix’s trace and the difference between the two traces of random confusion matrices. We also illustrate the application of these derived distributions in calculating the superiority probability of four baseline ML models.

With the development of organizational biology and forced from the EU Cosmetic Regulation (EU/1223/2009) with the complete ban of animal testing for cosmetic purposes, 3D skin models have been widely developed due to their similar physiological structure and metabolic function to native human tissue. 3D skin models for in vitro cosmetic evaluation are still promising alternative methods for evaluating phototoxicity, corrosivity and irritation. These models have been used for early screening and later validation of toxicity and efficacy evaluation by many well-known cosmetic companies. 3D skin models have become an important tool in cosmetic evaluation research. This article reviews the development of 3D skin models and their application in cosmetic evaluation. An outlook on the current application and future technological development directions in the cosmetic field is also presented.

Underground storage of natural gas has the characteristics of clean and low-carbon, and has the ability to provide sustainable and stable supply. It is a very high-quality green energy that can increase the storage efficiency of gas storage through fracturing, achieving the sustainable development goal of "Carbon Peaking and Carbon Neutrality". The accurate evaluation of the fracability of a reservoir is an important prerequisite for reservoir fracturing design and post fracturing productivity evaluation. At present, research on fracability is mainly based on qualitative characterization or quantitative evaluation based on rock mechanics and fracturing construction parameters, which cannot fully reflect the rock composition and structure of each stage. Firstly, based on logging data, this paper analyzes the evolution laws of strain energy such as elastic properties, pre-peak dissipation energy, and post-peak fracture energy during the transition of rock materials from plastic deformation to brittle fracture in an energy perspective, and determines the key energy that affects the brittle characteristics of rocks. Secondly, a brittleness index evaluation approach has been established that can comprehensively reflect the mechanical properties of rocks during pre-peak deformation and post-peak damage stages. In addition, this article focuses on the impact of reservoir stratigraphic environment by combining the influence of geo-stresses with the rock brittleness index, and proposes a new method for evaluating reservoir fracability. Finally, this paper conducts a study on the fracability evaluation of three wells in a gas storage facility in eastern China. The results indicate that low modulus and fracability coefficient are beneficial for fracturing, thereby improving the gas production and peak shaving ability of gas storage.

Aging and obesity make humans more prone to cardiovascular and metabolic syndrome diseases, leading to several serious health conditions, including dyslipidemia, high blood pressure, and sleep disturbance. Hyperlipidemia means elevated blood lipid levels, including cholesterol and triglycerides. This study aimed to explore the hypolipidemic effect of fermented citrus lemon juice using a hyperlipidemic hamster model. Sugar-free lemon juice’s fermentation was optimized, and the characteristics of fresh and fermented lemon juice (FLJ) were evaluated and compared. In addition, tests were conducted to determine the appropriate hamster feed for the functional animal tests. Then, experiments were conducted to evaluate the hypolipidemic effect of the FLJ, which contained polyphenols and superoxide dismutase-like activity, on a hyperlipidemic hamster model. This study’s pre-fermentation efficiency evaluation found that 21–30 days of bacterial DMS32004 and DMS32005 fermentation of fresh lemon juice provided the best fermentation benefits. In addition, the fermentation evaluation showed that a sugar-free fermentation method provided FLJ with the best benefits. Results showed that the absorption and utilization efficiency of FLJ was higher compared with the unfermented lemon juice. After six weeks of feeding, the total cholesterol and triglyceride values in the blood and liver of the FLJ treatment groups were de-creased compared with the high-fat diet (HFD) group. In addition, the blood low-density lipoprotein cholesterol levels were significantly reduced in the FLJ treatment groups compared with the HFD group. In contrast, the blood high-density lipoprotein to low-density lipoprotein cholesterol ratio increased considerably in the FLJ treatment groups, and the total to high-density lipoprotein ratio was significantly lower than in the HFD group. Compared with the HFD group, the total cholesterol content in the FLJ treatment groups’ feces increased significantly. This study demonstrated that the sugar-free fermentation method and fermentation cycle management provided FLJ with the potential to regulate blood lipids. Further research and verification will be carried out to isolate specific substances from the FLJ and identify their mechanisms of action.

Based on survey data from 297 beef cattle farmers in five provinces, Hunan, Ningxia, Inner Mongolia, Shandong and Gansu, the impact of the package of support policies on farmers' beef cattle production was assessed by means of propensity score matching (PSM). The results showed that the package of support policies, the education level of the household head, participation in beef cattle professional cooperatives and taking out loans for beef cattle farming had significant positive impacts on farmers’ inventories of beef cattle and breeding cows. The current package of beef cattle support policies implemented by the national and local governments has significantly promoted the production of beef cattle by farmers, and the effects of the policy implementation have been positive. The implementation of the relevant support policies led to increases in farmers’ inventories of approximately 17 head of beef cattle and approximately 9 head of breeding cows. The contribution rates of the policy implementation to the beef cattle and breeding cow inventories reached 52.96% and 67.30%, respectively.

Pregnant women with diabetes often present impaired fetal growth, which is less common if maternal diabetes is well-controlled. However, developing strategies to estimate fetal body composition beyond fetal growth that could better predict metabolic complications later in life is essential. This study aimed to evaluate subcutaneous fat tissue (femur and humerus) in fetuses with normal growth among pregnant women with well-controlled diabetes using a reproducible 3D-ultrasound tool and offline TUI (Tomographic Ultrasound Imaging) analysis. Additionally, three artificial intelligence classifier models were trained and validated to assess the clinical utility of the fetal subcutaneous fat measurement. A significantly larger subcutaneous fat area was found in three-femur and two-humerus selected segments of fetuses from women with diabetes compared to the healthy pregnant control group. The full classifier model that includes subcutaneous fat measure, gestational age, fetal weight, fetal abdominal circumference, maternal body mass index, and fetal weight percentile as variables, showed the best performance, with a detection rate of 70%, considering a false positive rate of 10%, and a positive predictive value of 82%. These findings provide valuable insights into the impact of maternal diabetes on fetal subcutaneous fat tissue as a variable independent of fetal growth.

As an important carrier of urban residents' public life, urban public open space plays an indispensable role in improving the quality of life of urban residents. Accessibility is an important indicator to characterize the publicity and service level of a public open space. This study optimized the GIS-based, Gaussian two-part mobile search method to quantitatively calculate and evaluate the accessibility of public open space within a 5-minute walking distance for residents in Nanshan District, Shenzhen. On this basis, social survey methods, including the questionnaire survey method via a field survey and the interview method, were used to conduct field research on residents' accessibility satisfaction. Comparing the results of the survey on residents' accessibility satisfaction to the GIS quantitative evaluation results of accessibility, the results of the field research show that current residents of Nanshan are more satisfied with the accessibility of public open space. In view of the similarities and differences between the two sets of results, the influencing factors of public open space accessibility were analyzed, corresponding countermeasures were proposed for the construction of public open spaces in the future.

Embryo quality evaluation during in vitro development is vital for the success of assisted reproductive technologies (ART). However, the subjective morphological assessment by embryologists may result in inconsistencies that affect the selection of the best embryo for transfer. To provide a more comprehensive evaluation of embryo quality, we performed the integration of embryo metabolomics with standardized morphokinetic classification. The culture medium of 55 embryos (from 21 couples undergoing ICSI) was collected at two timepoints (day 3 and 5). Samples were split into Good (n=29), Lagging (n=19) and Bad (n=10) according to embryo morphokinetic evaluation. Embryo metabolic performance was assessed by 1H-NMR, monitoring the variation of specific metabolites (pyruvate, lactate, alanine, glutamine, acetate, formate). Adjusted metabolite differentials were observed during the first three days of culture and found to be discriminative of embryo quality at the end of day 5. Pyruvate, alanine, glutamine, and acetate were major contributors to this discrimination. Good and Lagging embryos were found to export and accumulate pyruvate and glutamine in the 3 first days of culture, while Bad embryos consumed them. This suggests that Bad embryos have a less active metabolism than Good and Lagging embryos and these two metabolites as putative biomarkers for embryo quality. This study provides a more comprehensive evaluation of embryo quality and can lead to improvements in ART by enabling the selection of the best embryos. By combining morphological assessment and metabolomics, the selection of high-quality embryos with the potential to result in successful pregnancies may become more accurate and consistent.

Osteoarthritis (OA) is the degeneration of cartilage in joints that results in bones rubbing against each other, it causes uncomfortable symptoms such as pain, swelling, stiffness, and can lead to disability. It usually occurs in the elderly and causes a large medical burden. The aim of this study is to evaluate cost-effectiveness between the standard treatment for osteoarthritis and the standard treatment with added crystalline glucosamine sulfate at various stages. The Markov analysis modelling was applied to evaluate the effect of both adding glucosamine compared to standard treatment from a societal perspective during whole patients’ lifetimes. Data input was collected by review in previous studies. The outcome was measured in quality-adjusted life years (QALYs), and the incremental cost-effectiveness ratio (ICER) from a societal perspective was ap-plied with 3%-discounted for all cost and outcome. One-way analysis via Tornado diagram was performed to investigate the change of factors in model. In general, the adding glucosamine into the standard treatment proved to be more cost-effectiveness compared to the standard treatment. Particularly, early stage adding glucosamine in the treatment was cost-effectiveness then post-stage adding glucosamine. The addition of supplementing crystalline glucosamine sulfate to whole regimen at any stage was cost-effectiveness at willingness-to-pay (WTP) threshold

The aim of the work was to carry out an ergonomic assessment of the workload when working with a chainsaw during motor-manual tree processing. Wearable technology was used, namely Garmin, Biostrap and Whoop devices, which are generally available. The dependence of the heart rate (HR) on physical workload was examined to calculate Heart Rate Index. The case study was done with one worker, three variations of chainsaw devices cutting the poplar wood. It was proved that the use of a heavier work tool, MS 500i /90 cm 9,3 kg, significantly contributes both to the creation of a non-physiological working position and to an increase in the energy required to perform work, which was represented by an increase in heart rate. With a lighter work tool and a shorter cutting blade, both a decrease in heart rate and a reduction in the working time were performed in a non-physiological position. The results can be used in common practice for workers´ self-assessment to increase safety and health protection at work or work productivity not only in motor-manual processing in forestry related professions.

Purpose: This study evaluates the performance of the Early Intervention Physiotherapist Framework (EIPF) for injured workers. This study provides a proper follow-up period (3 years) to examine the impacts of the EIPF program on injury outcomes such as return to work (RTW) and time to RTW. This study also identifies the factors influencing the outcomes. Methods: The study was conducted on data collected from compensation claims of people who were injured at work in Victoria, Australia. Injured workers who commenced their compensation claims after the first of January 2010 and had their initial physiotherapy consultation after the first of August 2014 are included. To conduct the comparison, we divided the injured workers into two groups: physiotherapy services provided by EIPF-trained physiotherapists (EP) and regular physiotherapists (RP) over the three-year intervention period. We used three different statistical analysis methods to evaluate the performance of the EIPF program. We used descriptive statistics to compare two groups based on physiotherapy services and injury outcomes. We also completed survival analysis using Kaplan-Meier curves in terms of time to RTW. We developed univariate and multivariate regression models to investigate whether the difference in outcomes achieved after adjusting for significantly associated variables. Results: The results showed that physiotherapists in the EP group on average dealt with more claims (over twice as many) than those in the RP group. Time to RTW for the injured workers treated by the EP group was significantly lower than for those who were treated by the RP group, indicated by descriptive, survival and regression analyses. Earlier intervention by physiotherapists led to earlier RTW. Conclusion: This evaluation showed that the EIPF program achieved successful injury outcomes three years after implementation. Motivating physiotherapists to intervene earlier in the recovery process of injured workers by initial consultation helps to improve injury outcomes.

The overlap of visual items in data visualization techniques is a known problem aggravated by data volume and available visual space issues. Several methods have been applied to mitigate occlusion in data visualizations, such as Random Jitter, Transparency, Layout Reconfiguration, Focus+Context Techniques, etc. This paper aims to present a comparative study to read visual variables values with partial overlap. The study focuses on categorical data representations varying the percentage limits of partial overlap and the number of distinct values for each visual variable: Hue, Lightness, Saturation, Shape, Text, Orientation, and Texture. A computational application generates random scenarios for a unique visual pattern target to perform location tasks. Each scenario presented the visual items in a grid layout with 160 elements (10 x16), each visual variable had from 3 to 5 distinct values encoded, and the partial overlap percentage applied, represented by a gray square in the center o each grid element, were 0% (control), 50%, 60%, and 70%. Similar to the preliminary tests, the tests conducted in this study involved 48 participants organized into four groups, with 126 tasks per participant, and the application captured the response and time for each task performed. The result analysis indicates that the Hue, Lightness, and Shape visual variables are robust to high percentages of occlusion and gradual increase in encoded visual values. The Text visual variable show promising results for accuracy, and resolution time was a bit higher than the last visual variables mentioned. In contrast, the Texture visual variable presented lower accuracy to high levels of occlusion and more different visual encoding values. At last, the Orientation and Saturation visual variables got the highest error and worst perfomance rates during the tests.

By using various skill scores and spatial characteristics of spatial verification methods and tradi-tional techniques of the model evaluation tool (MET, V10.0.0), the gridded precipitation obser-vation CMPAV (V2.0) and three datasets that derived from local (LOC), Shanghai (SHA), and Grapes (GRA) model respectively are conducted to assess the 3 lead day rainfall forecast with 0.5-day intervals during summer of 2020 over central east China. Results have shown that LOC generally outperforms the other two for most skill scores but usually with relatively larger un-certainties than SHA, and it has the least displacement errors for moderate rainfall among the three datasets. However, the rainfall of GRA has been heavily underestimated and accompanied with large displacement error. Both LOC and SHA have shown almost equitable abilities in forecasting convection and rainstorms of the large area but with a slightly over-forecast of local convection, while LOC likely over-forecasts the local rainstorms. In addition, SHA slightly favors over-forecast on a broad scale range and a broad threshold range, and LOC slightly misses the rainfall exceeding 100 mm. Generally, for a broadly comparative evaluation on rainfall, the popular dichotomous methods should be recommended under considering reasonable classifi-cation of thresholds if the accuracy is highly demanded. And most spatial methods should be suggested to conduct with proper pre-handling of non-rainfall event cases. Especially, the veri-fications including spatial characteristic difference information could be recommended in a computationally sufficient environment.

With the rise of piano teaching in recent years, many people have joined the team of piano learners. However, the expensive cost of manual instruction and the unique one-on-one teaching model have made piano learning an extravagant event. Most existing approaches based on the audio modality aim to evaluate piano players' skills. Unfortunately, these methods ignored the information contained in the video, which led to a one-sided and simplistic evaluation of the piano player's skills. More recently, multimodal-based methods are proposed to assess the skill level of piano players using both video and audio information. However, existing multimodal approaches use shallow networks to extract video and audio features, which are deficient in extracting complex spatio-temporal and time-frequency features from piano performance. Furthermore, the fingering and the pitch-rhythm information of the piano performance is contained in the spatio-temporal and time-frequency features, respectively. In the paper, we propose a ResNet-based audio-visual fusion model that combines video and audio features to assess the skill level of piano players. Firstly, ResNet18-3D is used as the backbone network for our visual branches, which can extract feature information from the video data. Then, we consider ResNet18-2D as the backbone network of the aural branch and extract the feature information from the audio data. The extracted video features are fused with the audio features to generate multimodal features for the final piano skill evaluation. The experimental results on the PISA dataset show that our proposed audio-visual fusion model, with a validation accuracy of 70.80%, outperforms the state-of-the-art methods in both performance and efficiency. Then, we also explore the impact of different layers of ResNet on model performance, and the experimental results show that the audio-visual fusion model dealing with the piano skill assessment problem can make full use of both feature information when the number of video features is close to the number of audio features.

This study mostly analyzes the pragmatic viewpoints of speech acts and language functions through Halliday’s (1975) language functions and Searle’s (1976) speech acts were adapted to analyze the functional aspects of the conversations and it was also intended to explore the teachers’ perception toward teaching and learning English as a Foreign Language (EFL) learners’ textbooks and the teacher’s components of communicative knowledge regarding the functions of language in daily activity. The participants of this paper consisted of thirteen Sunrise 10, 11, 12 grades of Kurdish teachers at high school English in Iraqi Kurdistan. Through semi-structured interview, it was found that the conversations in the mentioned textbooks are insufficient from the pragmatic point of view. Some recommendation for the textbook designers, teachers, material developer were raised to make up the shortcomings of the textbooks. The findings reveal that the conversation texts in Sunrise textbooks are not meeting the systematic standard of pragmatic competence the English language learners and the book designer must be recommended to be aware of those shortcomings of the textbook series if they are required to develop their speaking skills in both student and activity series. The implications of this paper can be helpful in comparing the results of this study with other similar studies to check if there is a universal pattern in performing the speech acts and language functions and the interest to Kimberley Education for Life learners in increasing their knowledge of pragmatics in general and the role of language functions and speech acts investigated in this study.

Smart local energy systems (SLES) have been promoted in policy as a solution to decarbonisation challenges which also bring wider benefits, such as community prosperity and energy affordability. But the combination of conditions required to enable their successful emergence and operation are still to be elaborated. This paper reports on the development of a Theory of Change (ToC) for the “societal project” of emergence of SLES with benefits. ToC is a process of making explicit the causal links by which activities lead to outcomes, surfacing assumptions, and recognising possible unintended consequences. We describe the ToC development process, involving consultation and collaboration across a research consortium. It consists of layers (e.g. users, skills, data and digital), and shows conditions considered necessary to deliver SLES, and for these to deliver wider benefits. It also provides interactive links to evidence emerging from the consortium, as well as policy/governance conditions and metrics. We reflect on potential uses of the ToC – internally to the consortium and externally – along with challenges we encountered in pursuing this approach. Policy implications relate to the importance of enabling conditions across multiple sectors, the absence of any of which could inhibit delivery of either SLES or their ensuing benefits.

The operation status of manufacturing equipment is directly related to the reliability of the operation of manufacturing equipment and the continuity of operation of the production system. Based on the analysis of the operation status of manufacturing equipment and its characteristics, it is proposed that the concept of assessing the operation status of manufacturing equipment can be realized by applying real-time acquisition of accurate inspection data of important parts of weak motion units and comparing them with their motion status evaluation criteria. Through the study of the application characteristics of fractional-order calculus theory, a differential data fusion model based on the fractional-order differential operator is established. The advantages of Internet of Things (IoT）technology and fractional order differential fusion algorithm are integrated to obtain real-time high-precision data of the operating parameters of manufacturing equipment, and the research objective of operating condition assessment of manufacturing equipment is realized. The feasibility and effectiveness of the method are verified by the application of the method in machining center operation status assessment.

Fusarium Head Blight (FHB) is a destructive disease affecting the grain yield and quality of wheat, barley, rye and triticale. Developing varieties with genetic resistance is integral to successfully managing FHB. However, significant knowledge gap exists in the genetic diversity present in triticale for FHB resistance. This information is critical for breeding new varieties of triticale as its production continues to increase. In the present study, a set of 298 winter triticale accessions from a worldwide collection were screened for their type-2 FHB resistance in an artificially inoculated misted nursery with high levels of inoculum density. Most of the triticale accessions were susceptible to FHB, and only 8% of accessions showed resistance in the field nursery screening. The resistant accessions identified in the nursery screening were selected and further screened for three years in greenhouse conditions. Seven accessions were found to show robust FHB resistance over the three years of greenhouse testing. Thirteen accessions showed significantly lower levels of Deoxynivalenol accumulation when compared to the susceptible triticale control. The accessions identified in the study will be useful in triticale and wheat breeding programs for enhancing FHB resistance and reducing DON accumulation.

Systems thinking is a valuable skill that may be required for an individual to be promoted in the business arena to managerial or leading positions. Thus, assessing systems thinking skills is an essential transaction for decision-makers in the organization as a preceding step to the promotion decision. One of the well-known and validated tools for this task is a questionnaire. However, because some of the questions invade the employee / candidate’s privacy, the answer may be biased. In this paper, we consider this potential bias, a phenomenon that is becoming more and more significant as privacy concerns and awareness continuously increase in the modern digital world. We propose a formal methodology to optimize the questionnaire based on the privacy sensitivity of each question, thereby providing a more reliable assessment. We conducted an empirical study (n=142), and showed that a systems skills questionnaire can be enhanced. This research has a significant contribution to improving the systems skills assessment process in particular, and also lays the foundations for improving the evaluation of other skills / traits.

With the rapid development of earth observation, satellite navigation, mobile communication and other technologies, the order of magnitude of the spatial data we acquire and accumulate is increasing, and higher requirements are put forward for the application and storage of spatial data. Under this circumstance, a new form of spatial data organization emerged-the global discrete grid. This form of data management can be used for the efficient storage and application of large-scale global spatial data, which is a digital multi-resolution the geo-reference model that helps to establish a new model of data association and fusion. It is expected to make up for the shortcomings in the organization, processing and application of current spatial data. There are different types of grid system according to the grid division form, including global discrete grids with equal latitude and longitude, global discrete grids with variable latitude and longitude, and global discrete grids based on regular polyhedrons. However, there is no accuracy evaluation index system for remote sensing images expressed on the global discrete grid to solve this problem. This paper is dedicated to finding a suitable way to express remote sensing data on discrete grids, and establishing a suitable accuracy evaluation system for modeling remote sensing data based on hexagonal grids to evaluate modeling accuracy. The results show that this accuracy evaluation method can evaluate and analyze remote sensing data based on hexagonal grids from multiple levels, and the comprehensive similarity coefficient of the images before and after conversion is greater than 98%, which further proves that the availability hexagonal grid-based remote sensing data of remote sensing images. And among the three sampling methods, the image obtained by the nearest interpolation sampling method has the highest correlation with the original image.

The recovery and valorization of waste are some of the key aspects of sustainable production. The crustacean exoskeletons can be potentially used to obtain value-added products such as chitosan. A comprehensive analysis including both safety and sustainability aspects of chitosan production from shrimp shells is presented in this study. The inherent safety analysis and sustainability evaluation was performed using the Inherent Safety Index (ISI) methodology and the Sustainable Weighted Return on Investment Metric (SWROIM), respectively. The process was designed for a processing capacity of 57,000 t/y according to shrimp production in Colombia. The economic (%ROI), environmental (PEI output), energy (exergy efficiency), and safety (ITI) technical parameters were included in the sustainability evaluation. The three first were obtained from the previous analysis performed by the authors. The total inherent safety index was estimated at 25 indicating that the process is inherently unsafe. The main process risks were given by the dangerous substance, reactivity, and inventory subindices. The overall sustainability evaluation showed a SWROIM of 36.23% indicating that the case study showed higher weighted performance compared to the return on investment (ROI) metric of 18.08%.

This study aimed to evaluate the capacity of Saccharomyces cerevisiae for Cadmium absorption in Milk. Nowadays one of the most serious problems is heavy metals pollution. Applying microorgaisms as a novel biotechnology is so useful especially in foodstuffs. Among the biosorbents for heavy metals’ removal, Saccharomyces cerevisiae has got an increasing attention due to its popularity in food industry. In this regard, the effects of some important factors such as the initial metal concentration, biomass concentration and contact time on the biosorption capacity of Saccharomyces cerevisiae were studied. The biosorption was analyzed by the inductively coupled plasma mass spectrometer (ICP-MS). The maximum Cd bioremoval (70%) was at 80 μg/L of this metal concentration in milk samples containing 30×10⁸ CFU Saccharomyces cerevisiae at the end of storage time (the 4^th day). There were no significant differences in sensory and physicochemical properties of milk samples during storage (p < 0.05). The isotherm studies followed by two popular models; Langmuir and Freundlich and the results showed a better fit to the Langmuir isotherm. All together, the results of this project demonstrated that the approach of using this valuable yeast, could be applied for food and drinks’ detoxification and producing healthier foods.

In 2015, the new installed capacity of global renewable energy power generation exceeded the newly installed capacity of conventional energy power generation, marking a structural change in the construction of the global power system. With the continuous improvement of wind energy utilization technology, the global wind power industry has developed rapidly in recent years. The world's available wind energy is 20 billion kilowatts and has become one of the most economical green power. In China, wind power has become the third largest source of electricity, with the installed capacity increasing from 3.1% in 2010 to 9.2% in 2017. In 2017, China's new installed capacity was 19,660 MW, accounting for 37.45% of the world's new installed capacity. This paper evaluates and compares the efficiency of wind power industry in the four regions of eastern, central, western and northeastern China through EBM models based on radial and non-radial factors. This paper discusses the contribution of China's wind power industry to CO2 emission reduction from the relationship between installed capacity efficiency and CO2 emission reduction efficiency. The conclusions show that the overall efficiency score and ranking of wind power in 2013-2017 is the best in the eastern region, followed by the northeast region and the western and central regions.

In order to evaluate the economy of superhighway, on the basis of the analysis of the cost of the ordinary expressway and high speed railway, the cost of superhighway is estimated. On this basis, the standard of the toll of superhighway at all levels is determined by reference to the standard of the construction cost and the toll collection standard of the ordinary expressway. According to the toll collection standard of superhighway and the fuel consumption cost of superhighway at all levels, the cost of single car and the single person cost of superhighway are calculated. Based on the analysis of highway passenger transport, railway passenger transport and civil aviation ticket price, the single person cost per kilometer of the above travel modes is calculated and compared with the single person travel cost per kilometer of superhighway. The results show that the single person cost of superhighway is between 0.29 and 0.47 yuan /km, which is 0.28 yuan /km higher than the highway bus, 0.18 yuan /km higher than the ordinary expressway self driving and 0.23 yuan /km higher than the express train, but 0.78 yuan/km lower than that of the first class seat of high-speed train, and is 0.92 yuan/km far lower than that of civil aviation flight economy class and 2.42 yuan/km lower than the business class. Therefore, the superhighway trip has certain advantages in economy.

The introduction of innovative digital tools for supporting manufacturing processes has far-reaching effects on an organizational and an individual level due to the development of Industry 4.0. The FACTS4WORKERS project funded by H2020, i.e. Worker-Centric Workplaces in Smart Factories, aims to develop user-centered assistance systems in order to demonstrate their impact and applicability at the shop floor. To do so it is important to understand how to develop such tools and how to assess if advantages can be derived from the created ICT system. This study introduces the technology of a workplace solution that is linked to a specific industrial challenge. Subsequently, a 2-stepped approach to evaluate the presented system is discussed. Heuristics, which are an output of project “Heuristics for Industry 4.0”, are used to test if the developed solution covers critical aspects of socio-technical system design. Insights into the design, development and holistic evaluation of digital tools at the shop floor should be shown.

The Inefficient water use, varying and low productivity in Kenya public irrigation schemes is a major concern. It is therefore necessary to periodically monitor and evaluate the performance of public irrigation schemes. The performance of public irrigation in western Kenya was assessed by combining benchmarking methodology and principal component analysis. The aim was to quantify and rank the performance of pumped public irrigation schemes in Kenya. Eleven benchmarking indicators were computed for the period from 2012 to 2016 and compared to global benchmark values. The indicators used fall under agricultural productivity, water supply and financial performance categories. The computed agricultural productivity was 36%–51% in Ahero, 23%–42% in West Kano and 26%–50% Bunyala irrigation scheme. Water supply performance in Ahero, West Kano and Bunyala irrigation schemes varied from 24% to 58%, 3% to 49% and 19% to 43% respectively. Financial performance varied from 46% to 54% in Ahero, 25% to 32% in West Kano and 54%–56% in Bunyala irrigation scheme. An average overall performance efficiency of 46%, 39% and 31% was obtained in Ahero, Bunyala and West Kano irrigation schemes respectively. The performance of the irrigation schemes is very poor and measures on improving performance are needed.

Plants are such important keys of biological part of our environment, supply the human life and creatures. Understanding how the plant’s functions react with our surroundings, helps us better to make plant growth and development of food products. It means the plant phenotyping gives us bio information which needs some tools to reach the plant knowledge. Imaging tools is one of the phenotyping solutions which consists of imaging hardware such as the camera and image analysis software analyses the plant images changings such as plant growth rates. In this paper, we proposed a preprocessing algorithm to eliminate the noise and separate foreground from the background which results the plant image to help the plant image segmentation. The preprocessing is one of important levels has effect on better image segmentation and finally better plant’s image labeling and analysis. Our proposed algorithm is focused on removing noise such as converting the color space, applying the filters and local adaptive binarization step such as Niblack. Finally, we evaluate our algorithm with other algorithms by testing a variety of binarization methods.

Successful work performance is an important part of everyday functioning. Different factors could contribute to efficiency at the workplace. Two studies aim to establish how different forms of knowledge transfer at the workplace are related to self-rated work performance and whether better work performance is related to mindfulness as an aspect of cognitive functioning. The participants were 742 working Bulgarians in Study 1 and 259 workers in Study 2. Ten scales were used in Study 1, measuring different forms of knowledge transfer and self-rated work performance, and two scales were used in Study 2, measuring self-assessed work performance and mindfulness. The results revealed that higher self-assessment of work performance correlated positively but weakly with the sharing of tacit knowledge at the workplace, sharing knowledge with colleagues in dyads, work climate encouraging mastership, sharing knowledge in teams, knowledge transfer by means of cooperation between different generations, institutionalized transfer of knowledge, knowledge receiving, and estimated effectiveness of participation in supervision as a supervisee. Some forms of knowledge transfer (sharing of tacit knowledge and sharing knowledge with colleagues in dyads) seemed more closely related to self-assessed work performance than others. Self-assessment of work performance did not correlate statistically significantly with performance motivational climate at work. The different forms of knowledge transfer correlated with each other. Better work performance is related to better cognitive functioning, as the second study of 259 workers additionally revealed that higher self-assessment of work performance correlated with better self-awareness measured by the Mindful Attention Awareness Scale, i.e., more attention focused on own thoughts, emotions, and needs, i.e., on what is happening right now. Interconnectedness between the different forms of knowledge transfer indicates that stimulating one kind of knowledge transfer could also stimulate many other forms of knowledge transfer, but this may happen only when organizations support a mastery-motivated climate at work. Established connections between the different forms of knowledge transfer and self-rated work performance, as well as between self-assessed work performance and mindfulness, suggest that good cognitive functioning accompanied good functioning, and both may be facilitated by knowledge transfer at the workplace.

The aim of this study was to investigate the knowledge, attitudes, and behaviors of family physicians regarding testicular cancer and testicular self-examination. This study was conducted with 307 physicians, including family physician specialists, family physician residents, contracted family physician specialist assistants (SAHU), and general practitioners, who agreed to participate in the study. All participants were administered a 33-item questionnaire consisting of sociodemographic questions and questions about testicular cancer and testicular self-examination, developed through literature review. Data analysis was performed using SPSS 22.0 software. 307 family physician specialists, family physician residents, SAHU residents and general practitioners participated in the study. 10.4% of the participants were working as family medicine specialists, 67.4% as family physician assistants, 13.7% as SAHU residents and 8.5% as general practitioners. The mean time spent in the profession was found to be 5.93±5.89. 65.8% of the participants thought that they had partially sufficient knowledge about testicular cancers. 57.7% of the participants stated that they did not know how testicular self-examination was performed. 49.7% of male participants stated that they had never done testicular self-exam before. While 95.8% of the participants thought that regular testicular self-examination was beneficial, 71.0% stated that they did not recommend testicular self-examination to their male patients. 53.4% of the participants thought that testicular self-examination was important; It was determined that 79.2% of them thought it was as important as breast self-examination. The rate of stating that all of the risk factors presented for testicular cancer are risks was found to be statistically significantly higher in specialist family physicians than in general practitioners and resident family physicians. The study revealed that family physicians lacked sufficient knowledge about testicular cancer and testicular self-examination, leading them not to recommend self-testicular examination to patients due to inadequate knowledge. In light of these findings, although self-testicular examination may not be recommended as a screening method, increasing awareness and knowledge among both family physicians and the public is crucial.

Background: Low-level physical activity (PA) among Chronic Low Back Pain (cLBP) is associated with various biopsychosocial factors. This research aimed to study the predictors of PA behavior among cLBP patients. Methods: In the present study 300 eligible patients with cLBP who referred to comprehensive health service centers in the Shahid Beheshti University of Medical Sciences (SBUMS) in Tehran, Iran were random selected.To diagnose the predictors of PA behavior, all the Theory of Reasoned Action (TRA) constructs were examined as risk factors to see if they influence on the probability of PA behavior occurrence and were interpreted through odds ratio (OR). SPSS version 19 was used to analyze the data. Results: Totally 280 cLBP patients with mean age of 57.07 ±13.09 years old participated in the study. This study showed that motivation to comply significant predictor the cLBP patients for subjective norm OR (%95CI): 2.095(0.116-2.792), p-value<0.001), intention was significant predictor for perform the PA behavior OR (%95CI): 1.431(0.138-1.538), p-value <0.001), behavior beliefs could predictor for attitude OR (%95CI): 1.276(0.106-1.355), p-value= 0.002). attitude, normative beliefs, subjective norm ,and evaluation outcome behavior could predictors the cLBP patients for intention to perform the PA behavior OR (%95CI): 1.188(0.032-1.312), p-value<0.001)., OR (%95CI): 1.158(0.076-2.208), p-value=0.003) ., OR (%95CI): 1.104(0.076-1.128), p-value<0.001) ., OR (%95CI): 0.814(0.301-1.440), p-value=0.007). Conclusions: This study showed that the cLBP patients who were normative beliefs and evaluation regarding PA behavior could effect on the intention to engage in greater PA than those via other constructs (attitude and subjective norm). This study showed that the cLBP patients who were normative beliefs and evaluation regarding PA behavior could effect on the intention to engage in greater PA than those via other constructs (attitude and subjective norm). This study showed that the cLBP patients who were normative beliefs and evaluation regarding PA behavior could effect on the intention to engage in greater PA than those via other constructs (attitude and subjective norm).

Background: The practice of self-medication is common worldwide and is an important component of medical self-care. However, the practice can be dangerous and is linked to various risks for the patients and the entire community. This study aimed to estimate the prevalence and factors associated with self-medication among Bangladeshi adults. Methods: A cross-sectional survey was conducted between April and June 2021 among Bangladeshi adults (aged &gt;19 years) using convenient sampling. A total of 1320 data were collected through face-to-face interviews using a standardized questionnaire. Multivariable logistic regression analysis was used to identify factors associated with self-medication practice (SMP). Results: Overall, 41% of adults in our survey reported SMP. The most common illnesses that prompted SMP were common cold/flu (66.4%), gastric problems (65%), and headache (64.4%). The most frequent reasons for SMP were to get better services (30.59%), perceive SMP without side effects (23.28%), and save time with effectiveness (14.56%). Potential risk factors included 10 years (AOR = 1.91; 95% CI: 1.04 - 3.50) and &gt;12 years of schooling (AOR = 5.03; 95% CI: 2.27 - 11.15), being a businessman (AOR = 4.64; 95% CI: 1.74 - 12.37), having ≤6 family members (AOR = 2.13; 95% CI: 1.40 - 3.24), being a member of a social group (AOR = 1.53; 95% CI: 1.10 - 2.12), a health status check after every six months (AOR = 1.52; 95% CI: 1.08 - 2.13), and current ill-health (AOR = 1.41; 95% CI: 1.06 - 1.87). Protective factors identified included ≤30 years of age (AOR = 0.40; 95% CI: 0.17 - 0.93), and practice of modern (AOR = 0.39; 95% CI: 0.22- 0.69) and herbal (AOR = 0.45; 95% CI: 0.21- 0.97) healing types. Conclusion: More than one-third of the study participants reported practicing self-medication. Increasing the community’s awareness of the extreme consequences of SMP and not just the average experience might sway individuals away from SMP, and implementing strict jurisdiction could be a way to minimize the SMP.

When examining the crucial role of civic competence in fostering sustainable societies, economies, and ecosystems, its significance for cultivating responsible and engaged citizens in our ever more interconnected global landscape must be recognized. Notably, education influences the development of civic competence throughout the learning experience at all levels of education. This research aims to explore the evolution of students’ self-assessment in terms of civic competence and its three sub-competences. The objective is to comprehend the present status of students’ self-assessments and explore their potential impact on the formation of a sustainable society. Data were collected for this study using an assessment tool elaborated in the ESF project “Development and Implementation of the Education Quality Monitoring System” for students’ generic competences. The tool, presented in a digital form using the QuestionPro platform, measures six generic competences, including civic competence. A total of 1,166 bachelor students and 354 Master’s students participated in the study, representing 22 Latvian higher education institutions. The study’s findings indicate that civic competence in the sample is considerably lower than the other generic competences measured, with a greater dispersion of results. The results also highlight specific areas within universities that require improvement during the learning process to cultivate individuals who are sustainable and socially responsible members of society.

Self-esteem, the evaluation of one's own worth or value, is a critical aspect of psychological well-being and mental health. In this paper, we propose an active inference account of self-esteem, casting it as a sociometer, or an inferential capacity to interpret one's standing within a social group. This approach allows us to explore the interaction between an individual's self-perception and the expectations of their social environment.When there's a mismatch between these perceptions and expectations, the individual needs to adjust their actions or update their self-perception to better align with their current experiences. We also consider this hypothesis in relation to recent research on affective inference, suggesting that self-esteem enables the individual to track and respond to this discrepancy through affective states such as anxiety or positive affect. By acting as an inferential sociometer, self-esteem allows individuals to navigate and adapt to their social environment, ultimately impacting their psychological well-being and mental health.

The purpose of this study is to analyze the self-regulated learning and the ability to write scientific papers of students after learning with the Project-Based Digital Science Module (DSM). This research is a mixed methods by analyzing quantitatively and qualitatively. The research instrument used to obtain data is using a product assessment sheet and a self-regulated learning questionnaire. Data analysis uses N-Gain to determine the increase in self-regulated learning scores and student scientific writing skills scores, and uses linear regression analysis to determine the effect of self-regulated learning on student scientific writing skills. The results obtained showed N-Gain score of learning independent is 0,65 and scientific writing ability is 0,94, then significant’s score from linear regression by using SPSS is 0,22 < 0,05. This result showed an increase in self-regulated learning and the ability to write scientific papers of students on each indicator after learning using the Project-Based Digital Science Module (DSM). In addition, based on the results of data analysis, it can be seen that there is an influence of self-regulated learning on the ability to write scientific papers of students after learning using the Project-Based Digital Science Module.

X-rays production through betatron radiation emission from electron bunches is a valuable resource for several research fields. The EuAPS (EuPRAXIA Advanced Photon Sources) project, within the framework of the EuPRAXIA project, aims to provide 1-10 keV photons (soft X-rays) developing a compact plasma-based system designed to exploit self-injection processes that occur in highly nonlinear laser-plasma interaction (LWFA) to drive electron betatron oscillations. Since the emitted radiation spectrum, intensity, angular divergence, and possible coherence strongly depend on the properties of the self-injected beam, accurate preliminary simulations of the process are necessary to evaluate the optimal diagnostic device specifications. Dedicated tools for these tasks are under development: electron trajectories from particle-in-cell (PIC) simulations are currently undergoing numerical analysis through the calculation of retarded fields and spectra for various plasma and laser parameter combinations. At the same time, an analytical approach is being examined to obtain an expression for the emitted spectrum, assuming linear or quadratic electron energy variation. Code structure and some trajectories analysis results are presented.

Self-selecting the intensity of aerobic training is a perspective that allows practitioners to develop autonomy (choice of pace), improve physical fitness and achieve weight loss. To compare the effect of four aerobic training protocols on cardiometabolic and psycho-affective responses in physically inactive adult men and women. The sample consisted of 11 individuals aged 56 ± 10 years and BMI 29.2 ± 2.4 kg/m2 performed four different treadmill aerobic training protocols, including: 1-individual with self-selected intensity (ISS), 2-individual with prescribed intensity (IPI) (64-76% of HR max), 3-small group with self-select. selected intensity (SGS) and 4-small group prescribed intensity (SGP) (64-76% of HR max). Heart rate (HR), lactate (LACT), perceived exertion (RPE), affective response (FS), activation scale (FAS), enjoyment (PACES) and intention to repeat the session (INT) were analyzed. Statistical analysis used ANOVA with Tukey's post hoc test (p&lt;0.05). HR, LACT and RPE analyzes did not show significant differences between protocols. The FS showed a smaller decline in the SI protocol (p&lt;0.05), and the intention to repeat the training session was greater in the SI protocol (p&lt;0.05). Conclusion: The data allow us to conclude that the SI training protocol produced superior results in affective response, pleasure and intention to repeat the session.

Background Coronavirus disease 2019 (COVID-19) almost ceased to spread across the globe, but post Covid psychological experiences are rarely documented. It is essential to understand the individual psychological needs and challenges regarding working during the covid-19 pandemic and resilience and psychological health to continuing work in the aftermath of this crisis. Objective To explore the psychological transformation of staff nurses after COVID-19 Methods A phenomenological and purposive sampling approach was employed. Registered nurses working at the largest health organization in Qatar includes 14 health facilities were invited to participate in this study. 17 nurses who were working in the facilities and were deployed during the first, second and third wave of Covid 19 participated in the interview. Data were collected through semi-structured face-to-face interviews using quarantine measures. The interview data were analyzed using inductive thematic analysis. Results The psychological transformation of participants was summarized into three themes fear zone, Learning zone and growth zone. These themes were classified into 10 sub-themes Fear and anxiety, Influence of media and news, Frequent change in policies and guidelines were the fear zone factors .Secondly Coping mechanism, teamwork, establishing compassionate care, social acceptance, personal and professional benefits helps them learn psychologically. Thirdly growth factors such as confident & resilient, Sense of purpose and Change life perception and meaning Conclusion Working during COVID-19 imposed many challenges on nurses such as workload and stress. However, the different waves of the pandemic may increase the resilience, confidence and life meaning in nurses. Their previous experiences in handling difficult situations during the pandemic may make the nurses become more confident in dealing with stressful situations and working under pressure.

The production associated with geopolymers is more environmentally friendly because it does not emit as much carbon dioxide as when OPCs are used. In addition, research has been initiated to produce a geopolymer with very good mechanical properties without the need to cure it at high temperatures. Bio-additives such as honey, cotton or molasses were found to have a good effect on the properties of the geopolymer. The purpose of this study was to develop a composition of geopolymer modified with bioaddi-tives (introduction of plant-derived materials containing sugars) in order to improve the strength para-meters of geopolymers cured at ambient temperature or to accelerate their setting process, and to identify whether it is possible to produce geopolymers with good strength parameters without the need for annealing. In this study, fly ash (FA)-based materials were made and addi-tionally modified with cane molasses and beet molasses in varying amounts. The made samples were subjected to surface morphology analysis (SEM), mechanical properties analysis - compres-sive and flexural strengths, phase composition analysis (XRD) and absorption analysis.

In response to escalating environmental concerns and the surge in eco-friendly sports activities, this study investigates the determinants of sustained intention to participate in plogging, a prac-tice that combines jogging and litter collection. The study seeks to discern the effects of autonomy, competence, and relatedness experiences, as suggested by Self-Determination Theory, on the intent to persist in plogging. Additionally, the study probes the moderating role of eco-friendly attitudes, thereby propelling the confluence of sports and environmental research. The research methodology encompassed surveying plogging participants and analyzing their responses. The validation of these relationships was executed using multi-group structural equation modeling. The results revealed that autonomy and competence did not significantly sway extrinsic motivation, but relatedness surfaced as the most influential factor. This suggests that plogging, primarily viewed as a volunteering activity, serves more as a prosocial behavior that bolsters relationships rather than a means to enhance physical competence. The study also found that the value participants derived from plogging and their intention to continue varied based on their eco-friendly attitudes. The study concludes that voluntary participation and socializing are the core values of plogging, and understanding these values can foster healthier and more sustainable behaviors. The findings offer valuable insights for academic, practical, and policy perspectives in promoting eco-friendly sports activities.

In the study, it was aimed to develop a valid and reliable scale in order to determine the self-efficacy perceptions of classroom teachers in the field of mathematics learning difficulties. In the development process of the scale, the basic resources and the scale development studies in the literature were examined. First, a pool of substances was created. Content validity was ensured by taking the opinions of 21 expert participants in the 24 question areas determined in the item pool. Content validity index was used in content validity. In this analysis, two questions were removed from the scale. Preliminary application was made with 44 participating teachers who are experts in their fields and exploratory factor analysis was started. For exploratory factor analysis, 359 people consisting of classroom teachers in Sakarya province were studied. In the explanatory factor analysis, 5 items were removed from the scale by looking at the factor load. The factor loadings for the 17 items in the scale vary between 0.508 and 0.976. Among the comparative fit indices obtained as a result of confirmatory factor analysis, RMSEA=0.067 and Cmin/DF=1.568 were calculated. The Cronbach alpha reliability coefficient of the measurements is 0.970. The data obtained were analyzed with statistical methods using SPSS 25, AMOS 24 and Microsoft Excel programs. The validity and reliability criteria of the scale developed within the scope of the study were met.

Research for novel vaccine adjuvants remains a critical need to improve the immune responses to a recombinant vaccine antigen. Emulsion adjuvants such as AS03 and MF59, particularly in the area of Influenza vaccines, have shown antigen dose sparing and allowed reduced immunizations. It was previously demonstrated that these emulsion adjuvants can be formulated using a simpler, low shear process of self-emulsification. The role of alpha tocopherol as an immunomodulator in emulsion adjuvants is evident from the success of AS03 in the on-going covid-19 pandemic. Although, it was a challenge to formulate alpha tocopherol with a low shear process to get closer to the AS03 composition, the self-emulsified version referred as self-emulsifying adjuvant systems (SE-AS) showed comparable immune responses to AS03 when co-administered with a Quadrivalent influenza virus (QIV) vaccine. In this paper, we first optimized the SE-AS with alpha tocopherol referred to as SE-AS44 to allow sterile filtration. We compared the in vitro cytokine profile with self-emulsifying adjuvant 160 (SEA160), a squalene-only self-emulsified adjuvant with composition similar to MF59. We compared SE-AS44 and SEA160 co-administered with a recombinant cytomegalovirus (CMV) pentamer antigen, which is a less immunogenic antigen, in vivo to compare the antibody and T-cell responses, in different adjuvanted groups, in C57BL/6 mice.

Self-healing is the capability of materials to repair themselves after damage has occurred, usually by interaction between molecules or chains. Physical and chemical processes are applied for the preparation of self-healing systems. There are different approaches for these systems such as heterogeneous systems, shape memory effects, hydrogen bonding or covalent-bond interaction, diffusion and flow dynamics. Self-healing mechanisms can occur in particular by heat and light exposure or by reconnection without direct effect. The applications of these systems display an increasing trend in both R&D and industry sectors. Moreover, self-healing systems and their energy storage applications are currently getting great importance. This review aims to provide general information on recent developments in self-healing materials and their energy applications in view of the critical importance of self-healing systems for lithium-ion batteries (LIBs). In the first part of the review, an introduction about self-healing mechanisms and design strategies of self-healing materials is given. Then, selected important healing materials in the literature for the anodes of LIBs are mentioned in the second part. The results and future perspectives are stated in the conclusion section.

Background: HIV self-testing (HIVST) is one of the recommended approaches for HIV testing services, particularly for helping reach populations who would not normally access facility-based HIV testing. HIVST must be tailored to different populations to ensure uptake. Objective: The main objective of this study was to develop an acceptable HIVST delivery strategy to help improve urban men’s engagement with HIV services. Methods: We invited key stakeholders for urban men’s HIV services to participate in a co-creation workshop aimed at developing HIVST delivery approaches for urban men, using eThekwini municipality as a study setting. We conducted purposive sampling to include health care users and health care providers, representing a range of views across the public sector and voluntary sector. We employed the Nominal Group Technique (NGT) method for data collection. The NGT workshop was conducted in two consecutive phases: phase one was focused on determining barriers for men’s engagement with the current/facility-based HIV testing services; phase two was aimed at determining HIVST delivery strategies. We used the results of the NGT to design a tailored HIVST strategy for urban men in eThekwini District. Results: Participants identified the following psychological factors as the most important barriers to uptake of HIV testing services by urban men: stigma, ignorance about the importance of testing and testing process as well as fear of positive test results. Key stakeholders suggested internal motivation strategies as a potentially effective approach to support HIVST delivery strategy. Guided by the NGT results, we designed a HIVST delivery strategy that is supported by a risk communication approach Conclusion: We designed an evidence-based risk communication mobile health (mHealth) strategy coupled with SARS COV-2 self-testing tailored to improve men’s uptake of HIVST. A follow-up study to evaluate the feasibility of implementing these approaches is recommended.

Our brains process information using a layered hierarchical network architecture, with abundant connections within each layer and sparse long-range connections between layers. As these long-range connections are mostly unchanged after development, each layer has to locally self-organize in response to new inputs to enable information routing between the sparse in- and output connections. Here we demonstrate that this can be achieved by a well-established model of cortical self-organization based on a well-orchestrated interplay between several plasticity processes. After this self-organization, stimuli conveyed by sparse inputs can be rapidly read out from a layer using only very few long-range connections. To achieve this information routing, the neurons that are stimulated form feed-forward projections into the unstimulated parts of the same layer and get more neurons to represent the stimulus. Hereby, the plasticity processes ensure that each neuron only receives projections from and responds to only one stimulus such that the network is partitioned into parts with different preferred stimuli. Along this line, we show that the relation between the network activity and connectivity self-organizes to a biologically plausible regime. Finally, we argue how the emerging connectivity may minimize the metabolic cost for maintaining a network structure under the above described constraints.

This proposal describes the design and development of an interoperable application that supports green open access with long-term sustainability and improved user experience of article deposit. Introduction: The lack of library resources and unfriendly repository user interface are two significant barriers that hinder green open access. Tasked to implement the open access mandate, librarians at an American research university developed a comprehensive system called Easy Deposit 2 to automate the support workflow of green open access. Implementation: Easy Deposit 2 is a web application that is able to harvest newly publications, outreach for manuscript on behalf of the library, and facilitate self-archiving to IR. It is developed and maintained by the library and integrated with the IR. Results and Discussion: The article deposit rate is about 25% with Easy Deposit 2, which increases significantly comparing to the previous period. It also serves as a local database for faculty publications with open access status. The lesson learned is that library cannot rely on a single commercial provider for publication data due to mismatched priorities. Conclusion: Recent IT developments provides new opportunities of innovation like Easy Deposit 2 in supporting open access. Academic librarians are vital in promoting "openness" in scholarly communication such as transparency and diversity in the sharing of publication data.

The study aimed to understand the experiences of adolescent smokers who participated in a smoking cessation program based on self-reflection, and to develop the theoretical basis for constructing similar programs. The participants, ten students from middle and high schools located in cities G and S, were interviewed after the program ended. Data were collected from August to November 2019 and analyzed using a phenomenological approach to understand participant experiences in depth. The analysis revealed five major themes: ‘Uniqueness of the Program,’ ‘Perception of Smoking Cessation,’ ‘Positive Reflection on Life,’ ‘Understanding Others,’ and ‘A Search for Hope and Vision in Life.’ The findings revealed that the smoking cessation program facilitated the development of self-identity and vision, which may indirectly strengthen the motivation for adolescent smokers to quit smoking. These findings suggest the need for a life-changing smoking cessation program that enhances self-concept and self-esteem. Moreover, it highlights the importance of follow-up research to ensure effectiveness, and the need to develop programs with creative content.

While some researchers have suggested that the self-employment (SE) sector is a haven during a financial Crisis, others believe that SE is not necessarily the desired outcome, but an indicator that the labor market is tightening for some groups. Few researchers have compared the SE sector before and after the occurrence of a significant financial Crisis, especially in developed countries. This paper analyzes the determinants of entry into self-employment during the 2008 Spanish Crisis. Using data from the Encuesta de Presupuesto Familiar (EPF), results show that although the rate of SE did not experience a significant change during this time the Crisis affected people differently based on gender, with being females more affected than males. Results also suggest differences between Comunidades Autonomas in how the self-employment sector behaved during the Crisis.

Due to limitation of the binding energy of a self-gravitating matter, the radius of a body is at least twice larger than the Schwarzschild radius. The total energy is adsorbed at the body surface, giving rise of a size-dependent surface tension. Since the Hawking temperature appears to be the critical one, the black holes possess zero surface tension. Microscopic neutrino stars are also introduced.

This study aimed to know the conditioning factors of the transition process to the self-care of women diagnosed with HIV/AIDS. This qualitative study was carried out from June to September 2015 with seven seropositive women, users of a specialized service in sexually transmitted diseases in the municipality of Imperatriz, Maranhão State, Brazil. For the data collection, an individual interview was used, and data analysis was performed by content analysis delineated by Hsieh and Shannon (2005). The resources that influence the self-care in the transition process of women with HIV/AIDS are represented by personal conditioning factors, such as the meaning they attribute to the living with the disease, personal attitudes and cultural beliefs, socioeconomic status, preparation and knowledge about the disease, and by conditioning factors found in the community and society. The transition theory can provide important insights about the resources present in the adaptation process of women diagnosed with HIV so that they can perform their self-care satisfactorily.