This retrospective study aimed to investigate the effect of known risk factors on nonsurgical periodontal treatment (NSPT) response using a pocket depth fine-tuning multilevel linear model (MLM). Thirty-seven patients (24 males and 13 females) with moderate to severe chronic periodontitis were treated with nonsurgical periodontal therapy. Follow-up visits at 3, 6, and 12 months included measurement of several clinical periodontal parameters. Data were extracted from a database system. Probing depth (PD) and Clinical Attachment Loss (CAL) reductions after NSPT in an overall of 1416 initially affected sites (baseline PD ≥ 4 mm), distributed on 536 teeth, were analyzed against known risk factors at three hierarchical levels (patient, tooth and site). The variance component models fitted to assess the three-level variance of PD and CAL decrease for each post-treatment follow-up showed that all levels contributed significantly to the overall variance (P < 0.001). Patients that underwent NSPT and were continually monitored had very curative results. All three hierarchical levels included risk factors who had impact on the to influence the magnitude of PD and CAL reduction. Specifically, the tooth’s type, surfaces involved and teeth mobility site-level risk factors showed the highest influence on these reductions, being highly relevant factors for the NSPT success.

Dynamic mechanical analysis (DMA) is a versatile technique that complements the information given by the more traditional thermal analysis techniques such as differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and thermal mechanical analysis (TMA). Dynamic constants such as storage modulus, loss modulus, and loss factor are temperature dependent and provide information about interfacial bonding between reinforced fibre and polymer matrix of composite material. To study the above mentioned properties at the glass transition region, for unidirectional fibrous composites reinforced with continuous fibers a reliable model was applied. In particular, the composite material was considered as composed of three phases with the intermediate phase between matrix and fibres, the interphase, to have variable properties depending on those of main phases and the mode of preparation of the overall material. The glass transition temperature is defined as the point at which the specific volume versus temperature curve changes abruptly slope marking the region between rubbery polymer and glassy polymer nature. Hence, the behaviour of unidirectional fibrous composites was investigated at this region. Examination of the glass transition temperature, which constitutes an upper limit for the structurally important glassy region through the loss factor, was performed by its consideration as a combination of glass transition temperature of matrix and interphase.

A risk of ischemic stroke increases exponentially after menopause. Even a mild-ischemic stroke can result in increased frailty. Frailty is a state of increased vulnerability to adverse outcomes, which subsequently increases risk of cerebrovascular events and severe cognitive decline, particularly after menopause. Several interventions to reduce frailty and subsequent risk of stroke and cognitive decline have been proposed in laboratory animals and patients. One of them is whole body vibration (WBV). WBV recuperates cerebral function and cognitive ability that deteriorates with increased frailty. The goal of the current study is to test the efficacy of WBV in reducing post-ischemic stroke frailty and brain damage in reproductively senescent female rats. Reproductively senescent Sprague–Dawley female rats were exposed to transient middle cerebral artery occlusion (tMCAO) and randomly assigned to either WBV or control groups. Animals placed in the WBV group underwent 30 days of WBV (40 Hz) treatment performed twice daily for 15 min each session, 5 days each week. The motor functions of animals belonging to both groups were tested intermittently and at the end of treatment period. Brains were then harvested for inflammatory markers and histopathological analysis. The results demonstrate a significant reduction in inflammatory markers and infarct volume with significant increases in brain-derived neurotrophic factor and improvement in functional activity after tMCAO in middle-aged female rats that were treated with WBV as compared to the control group. Our results may facilitate a faster translation of the WBV intervention for improved outcome after stroke, particularly among frail women.

Recent studies have indicated that several anti-hypertensive drugs may delay the development and progression of Alzheimer’s disease (AD). However, the relationships among AD, hypertension, and oxidative stress remain to be elucidated. In the present study, we aimed to determine whether treatment with resveratrol reduces reactive oxygen species (ROS) generation in the brain, thereby reducing cognitive impairment in rats with angiotensin II (Ang-II)-induced early AD. Male WKY rats with Ang-II-induced AD were treated with losartan or resveratrol for 2 weeks. Our results revealed that treatment with resveratrol (10 mg/kg/day) decreased blood pressure, increased levels of brain-derived neurotrophic factor (BDNF) in the hippocampus, and decreased ROS production in the nucleus tractus solitarius (NTS) in the Ang-II groups. In addition, inhibition of Tau^T231 phosphorylation in the hippocampus using resveratrol significantly abolished Ang-II-induced expression of Ab precursors, active caspase 3, and glycogen synthase kinase 3b (GSK-3b)^Y216 while increasing Akt^S473 phosphorylation. Notably, resveratrol reversed impairments in hippocampal-dependent contextual memory induced by deleting NADPH oxidase and NOX2. Overall, our results suggest that resveratrol exerts neuroprotective effects against memory impairment and hippocampal damage in a rat model of early stage AD by reducing oxidative stress. These novel findings indicate that resveratrol may represent a pharmacological option for patients with hypertension at a risk of AD during old age.

Three-phase to single-phase matrix converter (TSMC) is used as the transmitter for transient electromagnetic method (TEM) instrument, instead of an AC-DC converter and an H-bridge inverter. The transmitter produces excitation current for primary field. The output current has a waveform with a bipolar square of half duty cycle, which is required by TEM. The space vector PWM based on input currents is discussed in detail. The control method of input power factor is proposed for TSMC. The simulation model of TSMC is established and the simulations of different conditions are completed. The simulation results show the controllability of the input power factor is illustrated.

The objective of this research is to develop an experimental-theoretical analysis about the influence of the cooling medium and the geometry of the welding bead profile in fatigue life and associated parameters with structural integrity of welded joints. A welded joint with cruciform geometry is considered using SMAW, plates in structural steel ASTM A36 HR of 8 mm of thickness and E6013 electrode input. A three-dimensional computational model of the cruciform joint was created using the finite element method. For this model, the surface undulation of the cord and differentiation in the mechanical properties of the fusion zone were considered, the heat-affected zone (HAZ) and base material, respectively. In addition, an initial residual stress field which was established experimentally was considered. The results were a set of analytical expressions for the weld magnification factor Mk. It was found that values for the latter decrease markedly in function of the intensity of the cooling medium used in the post welding cooling phase, mainly due to the effect of the residual compressive stresses. The obtained models of behavior of the weld magnification factor are compared with the results from other researchers with some small differences, mainly due to the inclusion of the cooling effect of the post weld and the variation of the leg of the weld bead. The obtained analytical equations in the present research for Mk can be used in management models of life and structural integrity for this type of welded joint.

Georgia is ranked fifth highest among states for rates of HIV diagnosis. About 4% of persons living with HIV infection in the United States reside in Georgia, and almost 19% of these people do not know their HIV status. The present study examined the trends and associated factors of HIV testing among adults in Georgia between 2010 and 2014 by analyzing data of the Behavioral Risk Factor Surveillance System (BRFSS). A total of 30,791 persons aged ≥18 years were identified who responded to the question “Have you ever been tested for HIV?” Overall, there were 11,543 respondents who had been tested for HIV, with a decrease in percentage from 49.4% in 2010 to 43.7% in 2014 (p<0.001). Factors associated with HIV testing were being black (p<0.001), being younger than 55 years (p<0.001), single (p=0.02), attaining education level above high school (P<0.001), engaging in HIV high-risk behaviors (p<0.001), and not having healthcare coverage (p=0.03). Overall in Georgia, there has been a decline in the temporal trend of HIV testing, and more than half of adults have never been tested for HIV. For reducing HIV transmission in Georgia, enhancing access and utilization of HIV testing should be a public health priority.

Reducing CO2 emissions is urgently needed to slow down the impacts of climate change. CO2 capture using an amine solution has been developed and implemented on pilot and commercial scales. However, amine scrubbing, in particular, produces a lot of degraded solvent as waste and is energy intensive. Solid sorbents have been called to overcome those drawbacks. In this work, waste biomass-derived carbon materials were developed and tested for CO2 capture and conversion. Advanced thermal chemical processes i.e. hydrothermal and pyrolysis were applied to produce materials from agri-food waste such as soybean and okara. It was found that the number of functional groups (-C=O and -OH) in activated carbon appears in the synthesized materials, implying the generation of surface oxygenated groups. Preliminary results showed that the synthesized activated carbons are obtained with good yields, and a relatively high surface area, which may be applied as CO2 adsorption materials to solve the CO2 emission problems.

Salidroside, a valuable phenylethanoid glycoside, is obtained from plants belonging to the Rhodiola genus, known for its diverse biological properties. At present, salidroside is still far from large-scale industrial production due to the lower titer and higher process cost. In this study, we constructed a biosynthetic pathway from L-tyrosine to salidroside in Saccharomyces cerevisiae. To increase sali-droside production, we for the first time constructed an in vivo UDP-glucose regeneration system that sucrose synthase GmSUS worked in conjunction with UDP-glucose transferase RrUGT33 to improve the UDP-glucose availability with inexpensive sucrose as the consumed substrate. Finally, the molar conversion rate of L-tyrosine could reach 95%. To further reduce the cost, co-culture with E. coli that synthesized L-tyrosine de novo resulted in an 81% reduction in the final substrate cost per 1 kg of salidroside compared to the initial cost. The final titer of salidroside obtained 3.8 g/L and was the highest titer achieved at the Shake-Flask-Level in the existing reports. And this marked the first successful synthesis of salidroside in an in situ enhanced UDP-glucose system using sucrose. This accomplishment laid a robust groundwork for further investigations into the synthesis of other notable glycosides and natural compounds.

A set of polymer composite bolted T-joints with novel configuration consisting of internal skeleton and external skin was fabricated using a prepreg-RTM co-curing molding process. Experiments were conducted to study their mechanical properties under bending load. A finite element model with a polymer resin area between the skin and skeleton was established and verified by the experimental results. Then, the damage propagation process and failure mechanism of the joint and the influence of three factors related to the layer characteristics of the skin and skeleton were investigated by the validated models. The results show that the bending stiffness and the yield limit load of the novel composite T-joint are 0.81 times and 1.65 times that of the 2A12 aluminum T-joint respectively, while at only 55.4% of its weight. The damage of the joint initiates within the resin area and leads to a degradation of the joint bending performances. The preferred stacking sequence of the skeleton is [0/+45/90/-45]ns when primarily subjected to bending loads. The decrease in bending performances is within 5% with the inclining angle of the skeleton less than 12 degrees. The more layers of 90° in the skin, the better bending performances of the joints, while the more layer of 0°, the poorer bending performances.

This paper outlines the evolution of a learning technology interface from a Beta version to launch with educators and its alignment to pedagogical theory, designed to maximise collaboration between teacher and student. It explores how the “co-creation” of curricula via textual sources that underpin teaching and learning can be enhanced through interactive e-books and outlines the challenges involved in this praxis. With a number of stakeholders involved in the live use of the platform (including teachers, students, HE educators, course instructors, curriculum designers and software developers), iterative feedback loops informed real-time design improvements to both the interface and the-ory. This collaboration utilised a design-based research (DBR) approach (Wang and Hannafin, 2005), which is outlined here as explanation of how the tool developed and how iterative feedback helped to reconsider the challenges educators face in implementing pedagogical innovation across differing contexts. We propose how speculative design (Lukens and DiSalvo, 2012) and Activity Theory (Engeström, 1987) workshops can methodologically enhance the planning and evaluation phases inherent to DBR approaches, which involve students to prepare for educators’ innovation. Finally, we conclude with how educators can utilise these design principles using stratified approaches to help prepare organisational approaches for innovation.

We present a summary of the main results within the Scale Invariant Vacuum (SIV) paradigm based on the Weyl Integrable Geometry (WIG) as an extension to the standard Einstein General Relativity (EGR). After a brief review of the mathematical framework, where we also highlight the connection between the weak-field SIV equations and the notion of un-proper time parametrization within the reparametrization paradigm, we continue with the main results related to early Universe; that is, applications to inflation, Big Bang Nucleosynthesis, and the growth of the density fluctuations within the SIV. In the late time Universe the applications of the SIV paradigm are related to scale-invariant dynamics of galaxies, MOND, dark matter, and the dwarf spheroidals where one can find MOND to be a peculiar case of the SIV theory. Finally, within the recent time epoch, we highlight that some of the change in the length-of-the-day (LOD), about 0.92 cm/yr, can be accounted for by SIV effects in the Earth-Moon system.

High-strength wastewaters from a variety of sources, including the food industry, domestic septage and landfill leachate, are often hauled to municipal wastewater treatment plants (WWTPs) for co-treatment. Due to their high organic loadings, these wastewaters can cause process upsets in both the WWTP’s liquid and solids treatment trains and consume organic treatment capacity, leaving less capacity available to service customers in the catchment area. A novel pre-treatment method, the Waste Activated Sludge-High Rate (WASHR) process, is proposed to optimize the co-treatment of high-strength wastewaters. The WASHR process combines the contact stabilization and sequencing batch reactor processes. It utilizes waste activated sludge from the municipal WWTP as its biomass source, allowing rapid start-up. Bench scale treatment trials of winery wastewater confirm the WASHR process can reduce loadings on the downstream WWTP’s liquid treatment and solids treatment trains. A case study approach is used to confirm the economic viability and environmental sustainability of the WASHR process compared to direct co-treatment using life cycle cost analyses and greenhouse gas emissions estimates.

Low pasture biomass production and fodder scarcity are among the major challenges affecting productivity of dairy cattle farms in Sri Lanka. As a potential solution to this, two Napier hybrid cultivars CO-5 and Sampoorna were recently introduced and a field experiment was conducted to evaluate their growth, dry matter production and nutritional composition during May to September 2020. Plant measurements and samples were collected at five harvest intervals (4, 6, 8, 10 and 12 weeks after planting), with the plant samples subjected to biomass and nutritional assessments. The number of tillers and leaf length differed (P=0.01) between the two cultivars at 4 weeks harvesting interval (HI) whilst number of leaves differed at 12 HI respectively. Dry matter yield increased (P=0.16) almost linearly whilst crude protein declined exponentially with CO-5 greater than Sampoorna (P=0.057; 9.3% vs 8.7%), with increasing harvesting intervals respectively. In-vitro Organic Matter Digestibility and In-vitro Metabolizable Energy contents were similar across weeks 4, 6 and 8 but then decreased. This study demonstrates that higher dry matter yields (12.54 t/ha) can be obtained by harvesting both cultivars at 12 HI, but from a nutritional perspective harvesting at 6 HI during Yala season of the year would be optimum for farmers.

The evolutionary transition from single-celled to multicellular individuality requires organismal fitness to shift from the cell-level to the cell group. This reorganization of fitness occurs by allocating the two components of fitness, survival and reproduction, between two specialized cell types in the multicellular group – soma and germ, respectively. How does the genetic basis for such fitness reorganization evolve? One possible mechanism is the co-option of life-history genes present in the unicellular ancestors of a multicellular lineage. Single-celled organisms must regulate their investment in survival and reproduction in response to environmental changes, particularly decreasing reproduction to ensure survival when stressed. Such stress response life-history genes can provide the foundation for the genetic basis for cellular differentiation in multicellular lineages. The regA gene family in volvocine green algae provides a model system to study how this co-option occurs. We discuss the origin and evolution of the volvocine regA gene family, including regA – the gene that controls somatic cell development in the model organism Volvox carteri. We hypothesize that the co-option of life history trade-off genes is a general mechanism involved in the transition to multicellular individuality, making volvocine algae and the regA family a useful template for similar investigations in other lineages.

We present a summary of the main results within the Scale Invariant Vacuum (SIV) paradigm as related to the Weyl Integrable Geometry. After a brief review of the mathematical framework, we will highlight the main results related to inflation within the SIV [9], the growth of the density fluctuations [8], and the application of the SIV to scale-invariant dynamics of Galaxies, MOND, Dark Matter, and the Dwarf Spheroidals [7]. The connection of the weak-field SIV results to the un-proper time parametrization within the reparametrization paradigm is also discussed [14].

Research investigating the neural substrates underpinning parental behaviour has recently gained momentum. Particularly, the hypothalamic medial preoptic area (MPOA) has been identified as a crucial region for parenting. The current study conducted a scientometric analysis of publications from 01 January 1972 to 19 January 2021 using CiteSpace software to determine trends in the scientific literature exploring the relationship between MPOA and parental behaviour. In total, 677 scientific papers were analysed, producing a network of 1509 nodes and 5498 links. Four major clusters were identified: "C-Fos Expression'', "Lactating Rat'', "Medial Preoptic Area Interaction'' and "Parental Behavior''. Their content suggests an initial trend in which the properties of the MPOA in response to parental behavior were studied, followed by a growing attention towards the presence of a brain network, including the reward circuits, regulating such behavior. Furthermore, while attention was initially directed uniquely to maternal behavior, it has recently been extended to the understanding of paternal behaviors as well. Finally, although the majority of the studies were conducted on rodents, recent publications broaden the implications of previous documents to human parental behavior, giving insight into the mechanisms underlying postpartum depression. Potential directions in future works were also discussed.

A sustainable solution for crack maintenance in geopolymers is necessary if they are to be the future of modern green construction. This study thus aimed to develop self-healing biogeopolymers that could potentially rival bioconcrete. First, a suitable healing agent was selected from Bacillus subtilis, B. sphaericus, and B. megaterium by directly adding their spores in the geopolymers and subsequently exposing them to a large amount of nutrients for 14 days. SEM-EDX analysis revealed the formation of biominerals for B. subtilis and B. sphaericus. Next, the effect of biochar-immobilization and co-culturing (B. sphaericus and B. thuringiensis) on the healing efficiencies of the geopolymers were tested and optimized by measuring their ultrasonic pulse velocities weekly over a 28-day healing period. The results show that using co-cultured bacteria significantly improved the observed efficiencies, while biochar-immobilization had a weak effect but yielded an optimum response between 0.3-0.4 g/mL. The maximum crack width sealed was 0.65 mm. Through SEM-EDX and FTIR analyses, the biominerals precipitated in the cracks were identified to be mainly CaCO3. Furthermore, image analysis of the XCT scans of some of the healed geopolymers confirmed that their pulse velocities were indeed improving due to the filling of their internal spaces with biominerals. With that, there is potential in developing self-healing biogeopolymers using biochar-immobilized spores of bacterial cultures.

The study of co-fusion was one of the essential topics in the history of metallurgy in China. Simulation experiments had been an essential concept in the study of the co-fusion steelmaking process. This paper mainly studied the simulation experiments of co-fusion from two aspects: the replication of co-fusion swords by three different methods, and the micro-analysis of the co-fusion samples. The experimental results indicated that several co-fusion swords could be made by different processes, but the carbon content and surface hardness were quite different. During repeated forging welded, the microstructure of the samples transformed from laminated to homogenized, finally the steel with a uniform carbon content was obtained. It was challenging to find the characteristics of co-fusion from the homogenized samples. The results prompted people to rethink the microstructure characteristics of ancient co-fusion artifacts.

Mangrove forests store and sequester large area-specific quantities of blue carbon (C_org). Except for tundra and peatlands, mangroves store more C_org per unit area than any other ecosystem. Mean mangrove C_org stock is 738.9 Mg C_org ha⁻¹ and mean global stock is 6.17 Pg C_org, which equates to only 0.4–7% of terrestrial ecosystem C_org stocks but 17% of total tropical marine C_org stocks. Seagrasses sequester more C_org per unit area than mangroves (179.6 g C_org m⁻²·a⁻¹) but twice the C_org sequestered by mangroves globally (15 Tg C_org a⁻¹). Mangroves sequester only 4% (range 1.3–8%) of C_org sequestered by terrestrial ecosystems, indicating that mangroves are a minor contributor to global C storage and sequestration. CO₂ emissions from mangrove losses equate to 0.036 Pg CO₂-equivalents a⁻¹ based on rates of C sequestration but 0.088 Pg CO₂-equivalents a⁻¹ based on complete destruction for conversion to aquaculture and agriculture. Mangrove CO₂ emissions account for only 0.2% of total global CO₂ emissions but 18% of CO₂ emissions from the tropical coastal ocean. Despite significant data limitations, the role of mangrove ecosystems in climate change mitigation is globally insignificant but may be more significant and effective at the national and regional scale.

Lithium-rich layered oxides is one of the most perspective candidates for cathode materials of lithium ion battery, because of its high discharge capacity. However, there are some disadvantages of uneven composition, voltage decay, and poor rate capacity, which are closely related to the preparation method. Here, 0.5Li2MnO3·0.5LiMn0.8Ni0.1Co0.1O2 were successfully prepared by sol-gel and oxalate co-precipitation methods. A systematic analysis of the materials shows that the 0.5Li2MnO3·0.5LiMn0.8Ni0.1Co0.1O2 prepared by the oxalic acid co-precipitation method has the most stable layered structure and the best electrochemical performance. The initial discharge specific capacity is 261.6 mAh·g-1 at 0.05 C, and the discharge specific capacity is 138 mAh·g-1 at 5 C. The voltage decay is only 210 mV, and the capacity retention is 94.2% after 100 cycles at 1 C. The suppression of voltage decay can be attributed to the high nickel content and uniform element distribution. In addition, tightly packed porous spheres help to reduce lithium ion diffusion energy and improve the stability of the layered structure, thereby improving cycle stability and rate capacity. This conclusion provides a reference for designing high energy density lithium-ion batteries.

This article discusses the outcomes of a quantitative analysis of the competitiveness of grain and its recycling in the countries-members of the Eurasian Economic Union (EEU) through econometric panel data models. The analysis is based on the data of public authorities’ statistics of the countries-members of the EEU, as well as the United Nations Comtrade Database which is a repository of official international trade statistics. The results of the analysis allow to assess the level of competitiveness of produced agro-food products in the countries-members of the EEU and determine the extent to which various factors affect it. The research conclusions can be used to develop and adjust the agreed with the agro-food policy in the EEU.

The promoter of the RECEPTOR-LIKE CYTOPLASMIC KINASE VI_A2 gene contains nine binding sites for the REPLUMLESS transcription factor. In agreement, the expression of the kinase gene was strongly downregulated in the rpl-4 mutant. Comparing phenotypes of loss-of-function mutants, it was revealed that both genes are involved in stem growth, phyllotaxis, organization of the vascular tissues, and the replum, highlighting potential functional interactions. Expression of the RLCKVI_A2 gene from the constitutive 35S promoter could not complement the rpl-4 phenotypes, but exhibited a dominant positive effect on stem growth and affected vascular differentiation and organization. The results also indicated that the number of vascular bundles is independently regulated from stem thickness. Although our study cannot demonstrate the direct link between the RPL and RLVKVI_A2 genes, it highlights the significance of the proper developmental regulation of the RLCKVI_A2 promoter for balanced stem development.

In a dual-inertia system based on permanent magnet synchronous motor (PMSM), the elastic transmission mechanism, such as reducer and coupling, is prone to mechanical resonance, which reduces the precision of servo system transmission. Model prediction and introduction of state feedback are effective methods to suppress mechanical resonance, but the control parameters de-pend on the mechanical parameters of the system. Therefore, mechanical parameter identification is very necessary. In this paper, a forgetting factor recursive least square method is used to identify the mechanical parameters of the dual-inertia elastic system. Firstly, the mathematical model of the dual-inertia system is established and reasonably simplified. Then, the discrete function of the identification algorithm is constructed, and the motor speed and electromagnetic torque are sam-pled to achieve the on-line identification of the main mechanical parameters of the dual-inertia system, and the influencing factors of the identification accuracy are analyzed. Finally, simulations and experiments are carried out to verify the effectiveness of the algorithm.

The United Nations’ Agenda 2030 has established a series of Sustainable Development Goals to address global challenges, including poverty, food insecurity, access to education, and social inequality. In this context, charitable organizations such as Caritas play a crucial role in mitigating the negative effects of these challenges and promoting fair and sustainable development. This study aims to analyze prevalent needs among individuals seeking assistance from Caritas in Campania and examine how the organization contributes to achieving the Agenda 2030 Goals in the region. The statistical investigation techniques considered include tandem analysis [], which considers a dimension-reduction technique, such as multiple factor analysis, and, then cluster analysis to identify similar groups of individuals. These exploratory data analysis methods have allowed for the identification of common needs, including food assistance, support for education, employment, and housing assistance. Subsequently, Caritas programs and initiatives aimed at meeting these needs and promoting sustainable development are explored. The results indicate that Caritas plays a significant role in addressing the urgent needs of the vulnerable population in Campania and contributes to the goals of Agenda 2030, particularly those related to poverty alleviation, immigration, health promotion, education, employment, and reduction of social inequalities. This study provides an important perspective on the relevance and effectiveness of Caritas’ work in the context of Agenda 2030.

The capability of in-house transient wave-multibody computational tool of ITU-WAVE are extended to predict the wave power absorption with Wave Energy Converters (WECs) arrays placed in front of a vertical breakwater. The analyses of hydrodynamic exciting and radiation forces are approximated solving boundary integral equation at each time interval. The reflection of incoming waves due to a vertical wall is predicted with method of images. The constructive or destructive performance of WECs arrays with different array configurations is measured with mean interaction factor. The behaviour of the exciting and radiation hydrodynamic forces of each WEC due to a vertical wall effect shows considerable differences than those of WECs arrays without a vertical wall influence. When the wave power absorption with WECs arrays with and without a vertical wall effect are compared, it is shown with numerical experiences that WECs placed in front of a vertical wall have much greater effects on wave power absorption. This can be attribute to the hydrodynamic interaction, standing waves, and nearly trapped waves in the gap between a vertical wall and WECs arrays. The analytical and other numerical results are used to for the validation of the numerical results of the present ITU-WAVE computational tool for exciting and radiation forces, and mean interaction factor of WECs arrays which show satisfactory agreements.

Background: PD1 and its ligand PD-L1 are related to the prognosis in many solid tumors, whether its role in oral squamous cell carcinoma (OSCC) remains unclear. Methods: Retrospective monocentric study including all patients with OSCC diagnosed and treated between 01/2020 and 05/2022. PD-L1 expression was assessed by combined positive score (CPS), considering CPS > or equal to 1 as positive (1-20 “low expression”, and ≥20 “high”). Descriptive analysis of patient cohort and tumors was performed, including tumor size, stage, lymph node involvement, recur-rence and survival. Results: 65 patients (65 tumors) were analyzed. 66.15% of tumors were ad-vanced stages (III-IV), of them, 97.67% PD-L1+ versus 71.42% within early stages (I-II). T4 tumors expressed PD-L1 in 100% of cases, compared with 54’54% in T1 tumors. 50.79 % of tumors showed lymph node involvement (pN+), 100% of them showing PD-L1+. Prevalence of pN+ was 59.38% for PD-L1 high expression versus 40.63% for low expression. Patients' follow-up ranged from 2 to 34.5 months. No significant difference was seen between overall survival (OS) and PD-L1 +/- (CPS ≥1 vs CPS <1) neither PD-L1 high (CPS ≥20) vs low CPS <20) (p 0.97 and 0.64, re-spectively). Conclusions: The method used to measure (laboratory test with Dako 22C3 an-ti-PD-L1 primary antibody) PD-L1 was reliable and accurate, with a correlation coefficient be-tween the PD-L1 expression in the biopsy and surgical piece of 0.83 (p 0.0001). CPS≥1 was ob-served in large tumors (p<0.001), and was correlated with of lymph node metastases (p<0.004). Further analysis of PD-L1 expression and its relevance in tumor biology and prognosis is needed.

Introduction: Oral candidiasis is an opportunistic fungal infection, often caused by Candida albicans. One of the virulence factors of C. albicans is sterol 14a-demethylase or CYP51. Compounds of anthocyanins (ternatin, cyanin) and flavonoids (rutin, isoquercetin, kaempferol, myricetin, limocitrin) from the extract of the Clitoria ternatea (butterfly pea) plant are believed to have potential to inhibit the CYP51 virulence factor of C. albicans to suppress oral candidiasis. The purpose of this research was to investigate the interaction between the ligands of anthocyanins and flavonoids from C. ternatea (butterfly pea) with CYP51. Methods: The in silico study applied molecular docking to examine the molecular interactions (binding affinity) between the anthocyanin and flavonoid ligands of interest from C. ternatea and the CYP51 receptor of C. albicans. Results: Predicted interactions exist between the ligands of anthocyanins (ternatin, cyanin) and flavonoids (rutin, isoquercetin, kaempferol, myricetin, limocitrin) from C. ternatea and the CYP51 receptor of C. albicans. Conclusion: C. ternatea has the potential to provide anti-fungal agents that can inhibit or slow down the occurrence of oral candidiasis, as indicated by in silico studies. However, it is important to conduct additional research regarding the properties of the plant to determine the unknown aspects of its effects to the human body.

Repeated exposure to pathogens leads to evolutionary selection of adaptive traits. Many species transfer immunological memory to their offspring to counteract future immune challenges. Transfer factor such as that found in colostrum is among the many mechanisms where transfer of immunologic memory from one generation to the next can be achieved for enhanced immune response. Here, a library of 100 plants with high protein contents were screened to find plant-based proteins that behave like a transfer factor moiety to boost human immunity. Aqueous extracts from candidate plants were tested on a human peripheral blood mononuclear cell (PBMC) cytotoxicity assay using human cancerous lymphoblast cells - K562 cells as a target and Natural Killer cells as an effector. Plant extracts that caused PBMCs to exhibit enhanced killing beyond the capability of the colostrum-based transfer factor were considered hits. Primary screening yielded an 11% hit rate. Protein content of these hits were tested by Bradford Assay and Coomassie stained-SDS-PAGE, where three extracts were confirmed to have high protein contents. Plants with high protein contents underwent C18 column fractionation using methanol gradients followed by membrane ultrafiltration to isolate proteins with molecular weight &lt;3 kDa, 3-30 kDa, and &gt;30 kDa fractions. It was found that the 3-30 kDa and &gt;30 kDa fractions had high activity in the PBMC cytotoxicity assay. The 3-30 kDa ultrafiltrates from the top two hits, seeds from Raphanus sativus and Brassica juncea, were then selected for protein identification by mass spectrometry. The majority of the proteins in the fractions were found to be seed storage proteins, with low abundance of proteins involved in plant defense and stress response. These findings suggest that Raphanus sativus or Brassica juncea extracts could be considered for further characterization and immune functional exploration with a possibility of supplemental use to bolster recipients’ immune response.

A friction loss model for brake testing platform is constructed to revise the braking force test results, which can largely improve the accuracy of automotive brake performance testing. Specifically, the influence of tire pressure, vehicle axle load, placement angle and vehicle speed on the friction loss is tested and analyzed on a wheelbase adjustable automotive anti-force brake testing platform. The friction loss model for the platform is constructed based on the defined relative slip and placement angle, which is validated through actual tests on four types of vehicles. The results showed that the maximum relative error between the values of the model calculated simulation and the measured was 2.2%, indicating the friction loss model is valid and can provide a basis for revising the braking force of automotive brake. Meanwhile, the maximum braking force increases from 3982 N to 4772 N, increased by 19.8%, when the placement angle increased from 36.9° to 47.0°. Accordingly, in order to improve the accuracy of detection results of the automotive anti-force rolling brake testing platform, the friction loss caused by the change in the placement angle should be revised, and then braking rate of the vehicle should be judged according to GB 7258-2017 and GB 38900-2020.

Background: The seasonal variation of peptic ulcers is a rhythmic phenomenon reported worldwide, exhibiting diverse patterns and controversies. Unfortunately, it has remained an unresolved mystery for more than 90 years. Numerous studies have found that this phenomenon was closely associated with multiple environmental factors, but the underlying mechanism has never been elucidated. Objectives: This study aims to elucidate the seasonal variation of peptic ulcers and identify the role of environmental factors in the disease. Methods: Based on a recently identified etiology of peptic ulcers, two inverse operations in calculus, differentiation and integration, are iterated to analyze the existing data. First, the fluctuation curve in the seasonal variation is differentiated twice into the monthly incidences caused by multiple individual environmental factors, and the fluctuation curve due to each individual environmental factor is generated separately. Second, the monthly incidences caused by the individual environmental factors are integrated twice to reproduce the fluctuation curves in the seasonal variation of peptic ulcers. Results: The differentiations of the fluctuation curves in the season variation reveal a parallel relationship between the psychological impacts of each individual environmental factor and the monthly incidences of peptic ulcers. The integrations of the monthly incidences caused by 3 environmental factors reproduce the fluctuation curves in 3 representative seasonal patterns of peptic ulcers but make the parallel relationships invisible. Discussion: The parallel relationships revealed a causal role of environmental factors in peptic ulcers, whereas the reproduction of the fluctuation curves elucidated that multiple environmental factors cause the seasonal variation of peptic ulcers by Superposition Mechanism. The regional differences in environmental factors result in the diverse patterns, as well as the controversy questioning the seasonality of peptic ulcers. Significantly, the data analyses exemplify the application of a new concept, Superposition Mechanism, which might be an indispensable methodological complement to life science and medicine.

Aims: Chronic coronary syndrome is associated with several risk factors, such as dyslipidemia and hypertension. AIP has been demonstrated to be a biochemical risk factor for coronary artery disease (CAD). This study aimed to determine whether AIP is an effective parameter for estimating obstructive CAD. Methods and Results: A total of 345 patients (mean age 62,2±10,3; 63% male) who underwent coronary angiography were included in this study. Obstructive CAD is defined as having one or more vessels with a stenosis of≥50%. Depending on the presence of obstructive CAD, all patients were divided into two groups. The AIP was significantly higher in the obstructive coronary artery group (AIP; 0,49±0,26 vs. 0,58±0,27, p=0,002). In univariate analysis, AIP was significantly associated with obstructive coronary artery disease [OD:3,74 (CI95% 1,62-8,64), P=0,020]. The AIP was further adjusted for confounding risk factors in three multivariate analysis models. Therefore, all three models showed a significant association. According to ROC analysis, 0.49 is the cut-off value for AIP, and a value above 0.49 indicates 50% coronary artery stenosis Conclusions: AIP may be used in the assessment of cardiovascular risk in patients with stable angina pectoris, and it may also be used to estimate obstructive CAD.

A full potential all-electron density functional method within generalized gradient approximation is used to investigate the electronic, elastic and transport properties of cubic copper sulphide and copper selenide. The electronic structure suggests metallic behavior with a zero energy band gap for both materials. Elastic property calculations suggest a stiff material with the bulk to shear modulus ratio of 0.35 and 0.44 for Cu2S and Cu2Se respectively. The transport properties were estimated using the Boltzmann transport approach. Seebeck coefficient, electrical conductivity, thermal conductivity, and power factor all suggest a potential p-type conductivity for Cu2S and n-type conductivity for Cu2Se.

ccurate recording of growth indicators for aquaculture species at different stages is essential for evaluating aquaculture production effectiveness and the rationality of feed formulations. Due to their convenience and non-invasiveness, weight, length, and condition factor are commonly used to assess the growth of aquaculture species . However, fish growth indicators, can vary significantly with age structure and feed components(nutrition), and relying on a single indicator may lead to misjudgments . In this study we investigated the growth indicators of gibel carp (Carassius auratus gibelio var. CAS V) at different growth stages (juvenile and adult) and different feed formulations. Meanwhile, fish weight-length relationship () was used to assess the growth indicators. The results showed that the weight-length relationship of gibel carp varied significantly with age and feed formulations. Additionally, the condition factor calculated depended on the weight-length relationship was more consistent with weight/length changes than measured. Weight analysis indicated that both weight, length, height, back thickness, and carcass ration had higher weights in analyzing fish growth. Therefore, during aquaculture production, fish growth evaluating requires considering diverse indicators such as weight, length,body height, back thickness, carcass ration,as well as condition factor to avoid misjudging the actual growth situation. Meanwhile, the use of the condition factor should consider the sufficient amount of data and whether the assumptions (such as being in a isometric growth period) are met.

In order to study the effect of TiB2 particles on the mechanical properties of TiB2/6061Al composites, a series of TiB2/6061Al 3D representative volume element (RVE) were established based on SEM photos. This model took into account the ductile damage of the matrix and the traction separation behavior of the interface, and the linear damage evolution law was introduced to characterize the stiffness degradation behavior of the matrix elements. The mixed boundary conditions were used for RVE tensile experiments, and the accuracy of the predicted result was verified by the agreement of the experimental stress-strain curve. Results show that the addition of TiB2 particles can effectively promote the load-bearing capacity of the composite, but elongation is reduced. With the weight fraction of TiB2 increasing from 2.5% to 12.5%, the elastic modulus, yield strength, and tensile strength are increased by 8%, 10.37%, and 11.55% respectively, while the elongation decreased by 10%. The clustering rate of the TiB2 particles is also an important factor affecting the toughness of the composites. With the increase in the clustering rate of TiB2 particles from 20% to 80%, the load-bearing capacity of the composites is not improved, and the elongation of the composites is reduced by 8%. Moreover, the high strain region provides a fast expansion path for crack propagation and the particle spacing is a crucial factor that affects the stress field.

In China, the majority of mountainous regions are characterized by complex topography and a delicate, sensitive geological environment. Coupled with a generally underdeveloped infrastruc-ture and numerous unreasonable human engineering activities, these regions are often highly susceptible to geological disasters. Geological hazards can cause significant damage to human lives and property, impeding the development of mountainous areas. Consequently, researching the assessment of geological hazard vulnerability is crucial for disaster prevention, emergency management, and economic development in these regions. This study focuses on Xuanwei City and selects eight factors for evaluation, including elevation, gradient, slope aspect, normalized vegetation index, stratigraphic lithology, distance from faults, distance from rivers, and distance from roads. These factors are chosen based on a comprehensive analysis of the spatial and tem-poral distribution of geological hazards and disaster incubation conditions. Two paired models, the deterministic coefficient model + logistic regression model (CF+LR) and the information quan-tity model + logistic regression model (I+LR), were employed to quantitatively assess the study ar-ea. The accuracy of these models was evaluated using ROC curves and AUC values. The results indicate that: (1) The AUC values for the CF+LR and I+LR coupled models are 0.799 and 0.772, respectively, demonstrating that both models can objectively and reliably assess the vulnerability to geological hazards in the study area; (2) Based on the CF+LR model calculations, the geological hazard susceptibility of Xuanwei City can be categorized into four zones: extremely high suscepti-bility (6.09%), high susceptibility (31.08%), medium susceptibility (32.26%), and low susceptibility (30.57%); (3) The CF+LR model more accurately represents the evaluation results and offers a strong reference value.

With the continuous improvement of people's quality of life and aesthetics, furniture products have higher requirements. Excellent solid wood chairs are the most representative products in furniture to enhance space and taste and whose design may significantly impact consumers' emo-tional experience and purchase decisions. This study aims to evaluate how the modeling imagery of solid wood chairs affects user preferences and emotional experiences. The development of the current era is inseparable from the analysis of big data. Firstly, a representative sample was ob-tained by multidimensional scaling (MDS), and the sample was analyzed and evaluated by fac-tor analysis. Moreover, five groups of adjective vocabulary were selected to describe the model-ing imagery of solid wood chairs, such as "balanced and coordinated", "unique and novel", "prac-tical and simple", "quality and detailed" and "traditional and plain". Further, the triangular fuzzy theory was applied to analyze and discuss the 12 types of solid wood chairs in the five groups of adjective vocabulary. Then the study verified that the differences in the evaluations of the 12 sam-ples in the "unique and novel" and "quality and detailed" groups were significant, but more minor differences in the groups of "traditional and plain", "balanced and coordinated" and "practical and simple". Through comprehensive comparison, five groups with similar modeling imagery were created, and solid wood chairs with different modeling imagery should be placed in suita-ble spaces. According to the results of this study, the evaluation of the modeling imagery of solid wood chairs can not only rely on subjective judgments but can be reasonably described through data analysis and mathematical algorithms. It can scientifically and effectively reflect the poten-tial perception needs of consumers on the modeling imagery of solid wood chairs, as well as help to improve the design efficiency of the furniture product development stage.

Endothelial integrity plays a major role in homeostasis and is responsive to the numerous endogenous factors released. While its functional role in vascular tone is well described, its role in the pathophysiology of cardiovascular disease is of interest as a potential therapeutic target. We performed a systematic review to provide an overview of new therapeutic and diagnostic targets for the treatment of coronary artery disease related to endothelial dysfunction. Databases of PubMed, Ovid’s version of MEDLINE, and EMBASE were interrogated with appropriate search terms. 28 studies met inclusion criteria and were included in the final systematic review. We identified inflammation, pulmonary hypertension, diabetes mellitus and Fabry disease as pathophysiological mechanisms and explored the therapeutic options related to these conditions including medications such as Canakinumab. Endothelial dysfunction has a key role in several different pathophysiological processes which can be targeted for therapeutic options. Ongoing research should be targeted at making the transition to clinical practice. Further research is also needed on understanding the amelioration of endothelial dysfunction with the use of cardiovascular medications.

In this paper, we study the weak deflection angle using Gauss-Bonnet theorem and bounding greybody factor for electric and magnetic black holes in the background of nonlinear electrodynamics. Using Gibbons and Werner's approach, first we acquire the Gaussian optical curvature to use in Gauss-Bonnet theorem and calculate the bending angle for spherically symmetric electric and magnetic black holes in both non-plasma and plasma mediums in the weak field limits. Later, we calculate the rigorous bounds of the greybody factor for the given black holes. Furthermore, we look into the graphical behaviour of bending angles and greybody bounds at some specific values of multiple parameters as well as black holes charges. It is to be mention here that all the results for the electric and magnetic charged black holes solutions reduce into the Schwarzschild black hole solution in the absence of the black holes charges.

Importance: p53 is an unequivocal tumor suppressor altered in half cancers. The immune system produces systemic p53 autoantibodies (p53 Abs) in many cancer patients. Objective: The focus of this systemic review and meta-analysis is on the prognostic value of p53 Abs expressed in the serum of patients with solid tumors. Data Sources: All the clinical investigations were searched on PubMed, MBase and Cochrane from 1993 reporting the first study until May 2021. Study Selection: Studies were included that met the following criteria: 1) participants with cancer; 2) outcome results expressed in relation to the presence of a p53 antibody; 3) a primary outcome (disease free survival, overall survival or progression free survival) expressed as hazard ratio (HR). The following exclusion criteria were used: 1) insufficient data available to evaluate outcomes; 2) animal studies; 3) studies with less than 10 participants. 1333 potentially relevant articles; studies as duplicates, non-patients studies or reviews were excluded. After viewing the titles and abstracts of the 52 remaining studies, the full texts of 34 studies were retrieved and 12 studies were included in the analysis. Data Extraction and Synthesis: PRISMA guidelines were used for abstracting and assessing data quality and validity by three independent observers. The summary estimates were generated using a fixed-effect model (Mantel–Haenszel method) or a random-effect model (DerSimonian–Laird-method) depending on the absence or presence of heterogeneity (I2). Main Outcome(s) and Measure(s): The primary study outcome was to determine the prognostic value of p53 Abs from a large population size of patients with solid tumors, as determined before data collection. Results: In total 12 clinical studies and of which 2094 patients were included and it was determined that p53-wt Abs expression in the serum significantly correlated with a worse survival of cancer patients (95% CI 1.48 [1.24, 1.77]; p<0.00001). On the contrary, data from literature indicated that there was a potential association between p53-mut Abs antibodies with better survival. Conclusions and Relevance: This is the first meta-analysis proving the diagnostic utility of p53-Abs for cancer patients, predicting a worse outcome. The serum-p53 value (s-p53-value) could be useful for future theranostics.

In the last years, the Distribution Grid Operators (DGOs) assumed transition strategies of the distribution grids towards an active area associated with the "Smart Grids" concept. They are considering the use of Artificial Intelligence techniques, combined with advanced technologies and real-time remote communication solutions of the enormous data amounts, to develop smart solutions into the small size distribution grids, also called microgrids (μGs). These solutions will provide support for the DGOs to ensure an optimal operation of the technical infrastructure of the μGs. In this context, a bi-level methodology for solving the phase load balancing problem in the μGs with complex topologies and a high number of single-phase consumers, considering a clustering-based selection criterion of the consumers for placement of the switching devices, was proposed in the paper. A real μG from a rural area, with 114 consumers integrated into the Smart Metering System (SMS), belonging to the DGO from Romania, was considered in testing the proposed methodology. An implementation degree of 17.5%, corresponding to the phase load balancing equipment installed to only 20 consumers from the μG, led to a faster computational time with 43% and reducing the number of switching operations by 92% than in the case of a full implementation degree (100%). The performance indicators related to the unbalance factor and energy-saving used in the evaluation of the technical benefits highlighted the efficiency of the proposed methodology.

Advances of Relativity Theory are in the replacement of the space-time model with time-invariant universal space that has a variable energy density. Every physical object with mass m and energy E is diminishing the energy density of space exactly for the amount of its energy. Lorentz factor has its origin in the variable energy density of universal space, we call it "superfluid quantum space" - SQS that is the primordial energy of the universe. Universal SQS is the absolute frame of reference for all observers as confirmed experimentally by the GPS system, which demonstrates that the relative rate of clocks is valid for all observers. A planet's perihelion precession and the Sagnac effect are the results of the SQS dragging effect.

The cancelation factor (CF) is a model for the ratio between gravity wave perturbations in the airglow intensity to that in the ambient temperature. The CF model allows to estimate the momentum and energy flux of gravity waves seen in nightglow images as well as the divergence of these fluxes due to waves propagating through the mesosphere and lower thermosphere region, where the nightglow and the Na layers are located. This study uses a set of T/W Na Lidar data and zenith nightglow image observations of the OH and O(1S) emissions to test and validate the CF model from the experimental perspective. The dataset analyzed was obtained during campaigns carried out at the Andes Lidar Observatory (ALO), Chile in 2015, 2016, and 2017. The CF modeled function was compared with observed points from an empirical method for vertically propagating waves that calculates directly the ratio of the gravity wave amplitude seen in nightglow images to the wave amplitude seen in lidar temperatures. We show that the CF analytical relationship underestimates the observed results generally. However, the O(1S) emission line has better agreement respect to the theoretical value due to simpler nightglow photochemistry. In contrast, the observed CF ratio from the OH emission deviates by a factor of two from the modeled asymptotic value.

Understanding the biology underlying the mechanisms and pathways regulating pancreatic β-cell development is necessary to understand the pathology of diabetes mellitus (DM), which is characterized by the progressive reduction in insulin producing β-cell mass. Pluripotent stem cells (PSCs) can potentially offer an unlimited supply of functional β-cells for cellular therapy and disease modeling of DM. Homeobox protein NKX6.1 is a transcription factor (TF) that plays a critical role in pancreatic β-cell function and proliferation. In human pancreatic islet, NKX6.1 expression is exclusive toβ-cells and is undetectable in other islet cells. Several reports showed that activation of NKX6.1 in PSC-derived pancreatic progenitors (MPCs), expressing PDX1 (PDX1⁺/NKX6.1⁺), warrants their future commitment to monohormonal β-cells. However, further differentiation of MPCs lacking NKX6.1 expression (PDX1⁺/NKX6.1^-) results in an undesirable generation of non-functional polyhormonal β-cells. The importance of NKX6.1 as a crucial regulator in MPC specification into functional β-cells directs attentions to further investigating its mechanism and enhancing NKX6.1 expression as a mean to increase β-cell function and mass. Here, we shed light on the role of NKX6.1 during pancreatic β-cell development and in directing the MPCs to functional monohormonal lineage. Furthermore, we address the transcriptional mechanisms and targets of NKX6.1 as well as its association with diabetes.

Urban form is associated with both socio-economic and urban physical properties. This study explores the differences among urban forms in the Seoul Metropolitan Region with a comparison between census-based socioeconomic variables and landscape metrics computed from remotely sensed data. To accomplish this, factor analysis and multi-dimensional scaling were used with the selected variables and metrics. When all of the measures are considered together, four types of cities and towns emerged: 1) exurban-fragmented high growth, 2) exurban-fragmented low growth, 3) compact-extensive urban core and 4) sub-urban compact-high growth. The results indicate that the fusion of knowledge of the physical urban layout and that of socio-economic characteristics is beneficial for a better understanding of urban spatial patterns. However, there remain challenges in delineating each urbanized area and with indicator selection for comparing urban form across cities and towns.

At the molecular level, response to an external factor or an internal condition causes reprogramming of temporal and spatial transcription. When an organism undergoes physiological and/or morphological changes, several signaling pathways are activated simultaneously. Examples of such complex reactions are the response to temperature changes, dehydration, various biologically active substances, and others. Synergistic action of multiple pathways greatly complicates the experimental study of the molecular genetic mechanisms of the organism's reactions. As a result, a significant part of the regulatory ensemble in such complex reactions remains unidentified. We developed metaRE, an R package for the systematic search for cis-regulatory elements enriched in the promoters of the genes significantly changed their transcription in a complex reaction. metaRE mines multiple expression profiling datasets generated to test the same organism's response and identifies simple and composite cis-regulatory elements systematically associated with differential expression of genes. Here we showed metaRE performance for identification of cold stress-responsive cis-regulatory code in Arabidopsis thaliana. MetaRE identified potential binding sites for known as well as unknown cold response regulators. Software with source files, documentation, and example data files are freely available online at the repository (https://github.com/cheburechko/MetaRE).

The present study aims to evaluate the ability of peonidin and petunidin-3-glucoside (Peo and Pet-3-glc) and their metabolites (vanillic acid; VA and methyl-gallic acid; MetGA), to prevent monocyte (THP-1) adhesion to endothelial cells (HUVECs), and to reduce the production of VCAM-1, E-selectin and VEGF in a stimulated pro-inflammatory environment, a pivotal step of atherogenesis. Tumor necrosis factor-α (TNF-α; 100 ng mL-1) was used to stimulate the adhesion of labelled monocytes (THP-1) to endothelial cells (HUVECs). Successively, different concentrations of Peo-3-glc and Pet-3-glc (0.02, 0.2, 2 and 20 µM) and VA and MetGA (0.05, 0.5, 5 and 50 µM) were tested. After 24 h, the production of VCAM-1, E-selectin and VEGF was quantified by ELISA kits, while the adhesion process was measured spectrophotometrically. Peo-3-glc and Pet-3-glc (from 0.02 to 20 µM) significantly (p<0.0001) decreased THP-1 adhesion to HUVECs at all concentrations (-37%, -24%, -30% and -47% for Peo-3-glc; -37%, -33%, -33% and -45% for Pet-3-glc). VA, but not MetGA, reduced the adhesion process at 50 µM (-21%; p<0.001). At the same concentrations, a significant (p<0.0001) reduction of E-selectin, but not VCAM-1, was documented. In addition, anthocyanins and their metabolites significantly decreased (p<0.001) VEGF production. The present findings suggest, that while Peo-3-glc and Pet-3-glc, but not their metabolites, reduced monocyte adhesion to endothelial cells through suppression of E-selectin production, VEGF production was reduced by both anthocyanins and their metabolites suggesting a role in regulation of angiogenesis.

Water is an indispensable natural resource that is often prodigiously threatened by anthropomorphic activities. This study evaluated the physicochemical properties of water and selected heavy metals in edible muscles of a piscivorous fish (Protopterus annectens) from Nyabarongo and Nyabugogo rivers of Rwanda. Edibility health risk was evaluated using the target hazard quotient method. Water samples were taken in triplicate from Ruliba station and Kirinda bridge on Nyabarongo river and Giticyinyoni on Nyabugogo river. Fish samples were obtained from the sampling stations on Nyabarongo river. All samples were analyzed following standard methods and analytical results indicated that the average temperature, pH, total dissolved solids and electrolytic conductivity of water from the rivers were within WHO acceptable limits. The statistical mean concentrations of the ionic components of the water samples were 1.61 ± 0.03, 0.53 ± 0.002, 0.24 ± 0.02 and 0.051 ± 0.01 mg/L for Fe, Mn, Cu and Pb respectively at Ruliba station and 0.63 ± 0.02, 0.02 ± 0.002, 0.09 ± 0.01, 0.06 ± 0.002 and 0.75 ± 0.02 mg/L for Fe, Mn, Zn, Cr and Pb respectively at Kirinda bridge. Water from Giticyinyoni had 1.57 ± 0.02, 0.49 ± 0.03, 0.29 ± 0.058, 0.43 ± 0.058, 0.15 ± 0.00 and 0.59 ± 0.058 mg/L of Fe, Mn, Cu, Zn, Cr and Pb respectively. Zinc, Cu, Cr and Cd were below detection limits in samples from Ruliba station and Kirinda bridge (Nyabarongo river). Edible muscles of P. annectens from Nyabarongo river contained 272.8 ± 0.36, 292.2 ± 0.25, 8.8 ± 0.36, 135.2 ± 0.15, 148.0 ± 0.21 and 432. 0 ± 0.50 mgkg^-1 for Fe, Mn, Cu, Zn, Cr and Pb at Ruliba station and 336.0 ± 0.70, 302.6 ± 1.22, 6.4 ± 0.26, 44.7 ± 0.20, 138.2 ± 0.17 and 302.4 ± 1.50 mgkg^-1 for Fe, Mn, Cu, Zn, Cr and Pb respectively at Kirinda bridge. Health risk assessment indicated that consumption of the edible muscles of P. annectens may lead to deleterious health effects as reflected by values of target hazard quotients being greater than one. Therefore, the Rwandese government should lay strategies to reduce pollution of the rivers. Further research should evaluate the heavy metal content of metabolically active organs of P. annectens from Nyabarongo river as well as the microbiological profile of water from the rivers.

Significant recent advances in cancer immunotherapeutics include the vaccination of cancer patients with tumor antigen-associated peptide-pulsed dendritic cells (DCs). DC vaccines with homogeneous, mature, and functional activities are required to achieve effective acquired immunity; however, the yield of autologous monocyte-derived DCs varies in each patient. Priming with a low dose of recombinant human granulocyte colony-stimulating factor (rhG-CSF) 16–18 h prior to apheresis resulted in 50% more harvested monocytes, with a significant increase in the ratio of CD11c+CD80+ DCs/apheresed monocytes. The detection of antigen-specific cytotoxic T lymphocytes after Wilms’ tumor 1-pulsed DC vaccination was higher in patients treated with rhG-CSF than those who were not, based on immune monitoring using tetramer analysis. Our study is the first to report that DC vaccines for cancer immunotherapy primed with low-dose rhG-CSF are expected to achieve higher acquired immunogenicity.

Huntington's disease (HD) is a rare genetic neurodegenerative disorder that causes motor disorders, neuropsychiatric symptoms and a progressing deterioration of cognitive functions. Complex issues resulting from the hereditary nature of HD, the complexity of symptoms and the concealed onset of the disease have a great impact on the quality of life of family carers. The caregivers are called as “forgotten people” in HD family, also in genetic counseling. This study aims to explore the reliability and validity of the Huntington’s Disease Quality of Life Battery for carers (HDQoL-C) within a Polish population. 90 carers recruited from the Enroll-HD study in Polish research centres of the European Huntington`s Disease Network completed a polish translation of the HDQoL-C. Data was subjected to Principle Components Analysis and reliability measures. The Polish version of the shortened versions of the HDQoL–C is similarly valid compared to the original English version and suitable for use within this population. The HDQoL-C has previously demonstrated a wide range of benefits for practitioners in capturing and understanding carer experience and these benefits can now be extended to Polish speaking populations.

Abstract Due to the relatively low efficiency of thermoelectric (TE) generators, they have mostly been used in niche applications where the unique properties of TE generators outweigh their lack of efficiency, or conditions where it is more reasonable to base the optimal design on maximum generated power rather than maximum efficiency. The aim of this work is to investigate how the different fundamental transport properties (Seebeck coefficient, thermal conductivity and electrical resistivity) in materials with equal figure of merit (ZT) impact TE module design and maximum power output. Further, we discuss and review the strategies to enhance material properties and the latest studies on the TE module performance. It is shown, that by increasing the power factor by a factor of 15 and decreasing the thermal conductivity by 13.33 in order to maintain ZT=1, power output is increased by 45%. This effect is stronger in lower module fill factor and thermal resistance of the heat source and heat sink.

Nine 2-(1,2-benzothiazol-3-yl)-N-(4-oxo-2-phenyl-1,3-thiazolidin-3-yl) propanamides were designed and synthesized, combining benzisothiazole and 4-thiazolidinone in one frame. The aim of the study was to verify their effectiveness to contrast the inflammatory/oxidative process in which free oxygen and nitrite (ROS and RNS) radicals, advanced glycation products (AGEs), inflammatory cytokines and matrix metalloproteinases (MMPs) are involved. Docking studies of all the compounds were performed in order to explore their binding mode at the MMP-9 protein. An appreciable anti-inflammatory/wound healing effects of the tested compounds was highlighted. Derivative 23, bearing a 4-carboxyphenyl substituent at C2 of the 4-thiazolidinone ring, exhibited the highest activity, being able to inhibit MMP-9 at nanomolar level (IC₅₀ = 40 nM).

Based on stochastic frontier analysis and translog input distance function, this paper examines the total factor energy efficiency of China’s industry using input-output data of 30 sub-industries from 2002 to 2014, and decomposes the changes in estimated total factor energy efficiency into the effects of technical change, technical efficiency change, scale efficiency change and input-mix effect. The results show that during this period the total factor energy efficiency in China’s industry grows annually at a rate of 3.63%, technical change, technical efficiency change and input-mix effect contribute positively to the change in total factor energy efficiency, while scale efficiency change contributes negatively to it.

Thrombin (factor IIa) and factor Xa (FXa) are key enzymes at the junction of the intrinsic and extrinsic coagulation pathways and are the most attractive pharmacological targets for the development of novel anticoagulants. Twenty non-amidino N²-thiophencarbonyl- and N²-tosyl anthranilamides 1-20 and six amidino N²-thiophencarbonyl- and N²-tosylanthranilamides 21-26 were synthesized and evaluated prothrombin time (PT) and activated partial thromboplastin time (aPTT) using human plasma at concentration 30 μg/mL in vitro. From these results, compounds 5, 9, and 21-23 were selected to study the further antithrombotic activity. The anticoagulant properties of 5, 9, and 21-23 significantly exhibited a concentration-dependent prolongation of in vitro PT and aPTT, in vivo bleeding time, and ex vivo clotting time. These compounds concentration-dependently inhibited the activities of thrombin and FXa and inhibited the generation of thrombin and FXa in human endothelial cells. In addition, data showed that 5, 9, and 21-23 significantly inhibited thrombin catalyzed fibrin polymerization and mouse platelet aggregation and inhibited platelet aggregation induced U46619 in vitro and ex vivo. N-(3'-Amidinophenyl)-2-((thiophen-2''-yl)carbonyl amino)benzamide (21) was most active.

Access to urban green and blue spaces (UGBS) has been associated with positive effects on health and wellbeing; however, the past decades have seen a decline in quality and user satisfaction with UGBS. This reflects the mounting challenges that many UK cities face in providing appropriate public facilities alongside issues such as health inequalities, an ageing population, climate change, and loss of biodiversity. At present, little is known about the preferences of different population subgroups and, specifically, the UGBS they visit and the spaces they avoid. Using a public participatory geographic information system (PPGIS), the overall aim of the research presented here was to investigate the preferences of different population subgroups in urban areas, and the UGBS they visit, using Edinburgh, Scotland as a case study. We created a baseline visitor demographic profile for UGBS use, and highlighted how visitors perceive, physically access, use, and engage with UGBS. The results revealed considerable variation in UGBS preference: one person’s favourite UGBS may be one that someone else dislikes and avoids. It is clear that adapting UGBS to suit local communities should not be a ‘one-size-fits-all’ approach. The conflicting views and preferences of different groups of respondents point to the importance of developing policies and park management plans that can accommodate a variety of uses and experiential qualities within individual parks. PPGIS offers an ideal tool for achieving this

In recent years, machine learning (ML) techniques have emerged as an efficient and effective technology within the petroleum industry. This paper focuses on the current application of ML in enhanced oil recovery (EOR) through CO2 injection, which exhibits promising economic and environmental benefits of climate-change mitigation strategy. Our comprehensive review explores the diverse use cases of ML techniques in CO2-EOR, including aspects such as minimum miscible pressure (MMP) prediction, well location optimization, oil production and recovery factor prediction, multi-objective optimization, Pressure-Volume-Temperature (PVT) properties estimation, Water Alternating Gas (WAG) analysis, and CO2-foam EOR, from 101 reviewed papers. In this comprehensive review, we catalog relative information, including the input parameters, objectives, data sources, train/test/validate information, results, evaluation, and rating score for each area based on criteria such as data quality, ML building process, and analysis of results. We also briefly summarized the benefits and limitations of ML methods in petroleum industry applications. Our detailed and extensive study could serve as an invaluable reference for employing ML techniques in the petroleum industry. Based on the review, we found that ML techniques offer great potential in solving problems in the majority of CO2-EOR areas involving prediction and regression. With the generation of massive amounts of data in the everyday oil and gas industry, machine learning techniques can provide efficient and reliable preliminary results for the industry.

This case study focuses on exploring the potential of biogas as a direct substitute for conventional fossil fuels in industrial applications. Instead of being limited to its common uses as a vehicle fuel or for power generation, this research aims to investigate how biogas can be integrated into industrial processes as an advanced and sustainable energy solution. By conducting a detailed analysis of the financial implications associated with the utilization of landfill gas and gas derived from biomass, a comprehensive understanding of their practical applications in the industrial sector can be obtained. This research goes beyond a superficial examination and delves into the intricate aspects of incorporating biogas as a viable alternative fuel source. When we say that utilizing biogas is technically feasible, it means that the necessary infrastructure and technologies are available to support its integration into industrial processes. This implies that there are existing methods and systems in place that can efficiently harness and utilize biogas for various industrial applications. These technologies ensure a seamless transition from conventional fossil fuels to renewable energy sources, leading to a more sustainable and environmentally friendly industrial landscape. Moreover, the statement that utilizing biogas is economically feasible emphasizes that the financial viability of employing biogas in industrial processes is advantageous. This research explores the potential cost savings and benefits associated with substituting conventional fuels with biogas. By carefully examining the economic aspects, such as initial investments, operational costs, and potential revenue streams, a comprehensive understanding of the financial impact of adopting biogas solutions in the industrial sector can be gained. By expanding and broadening the understanding of the technical and economic feasibility of biogas integration, this research aims to provide valuable insights into the potential of advanced biogas solutions for industrial applications. Indeed, to make biogas a viable and sustainable option as a raw material, it is necessary to establish farming subsidies and financial support specifically tailored for biogas production, similar to the existing support provided for food production. These subsidies and financial incentives play a crucial role in promoting and encouraging the growth of the biogas industry. By establishing such support systems, farmers and other stakeholders in the agricultural sector can be incentivized to participate in the production of biogas. This can involve the utilization of agricultural waste, organic residues, or dedicated energy crops for biogas generation. The financial assistance can help offset the initial investment costs, provide incentives for production, and ensure the economic viability of biogas projects. Moreover, when considering large-scale landfills or situations where industrial demands for energy are relatively low, landfill gas becomes a viable and practical option. Landfill gas, which is generated by the decomposition of organic waste in landfills, can be harnessed and utilized for various industrial purposes. This not only helps in managing waste but also provides a valuable source of renewable energy. In summary, while farming subsidies and financial support are crucial for promoting biogas production, landfill gas remains a viable option for large landfills or situations with minor industrial demands. The combination of these two approaches offers a comprehensive outlook on utilizing biogas as a renewable energy source for industrial applications.

Background: Idiopathic pulmonary fibrosis (IPF) is a fatal lung disease of unknown origin, with a median survival time of ~3 years after diagnosis without anti-fibrotic therapy. It is characterized by progressive fibrosis indicated by increased collagen deposition and high numbers of fibroblasts in the lung. It was demonstrated that CCL18 induces collagen and αSMA synthesis in fibroblasts. We aimed to identify the CCL18 receptor responsible for its pro-fibrotic activities. Methods: We used a random phage display library to screen for potential CCL18-binding peptides, demonstrated its expression in human lungs and fibroblast lines by PCR and immunostaining and verified its function in cell lines. Results: We identified CCR6 (CD196) as a CCL18 receptor and found its expression in fibrotic lung tissue and on lung fibroblast lines derived from fibrotic lungs but it is almost absent in control lines and tissue. CCL18 induces receptor-internalization in a CCR6-overexpressing cell line. CCR6 blockade in primary human lung fibroblasts reduces CCL18-induced FGF2 release as well as collagen-1 and αSMA expression. Knock-down of CCR6 in a mouse fibroblast cell line abolishes the induction of collagen and -smooth muscle actin expression. Conclusion: Our data indicate that CCL18 triggers pro-fibrotic processes via CCR6, highlighting its role in fibrogenesis.

The possibility of deep radiochemical purification of Li2CO3 has been examined in the frame of the purification program of AMoRE collaboration. In this experiment, commercial Li2CO3 was converted into LiNO3. Co-precipitation with inorganic salt-based carriers followed by membrane filtration and sorption using MDM inorganic sorbent methods were tested for the removal of alkaline-earth and transition metals, potassium, magnesium, aluminum, uranium, thorium, and radium. The calcium molybdate-based carrier was the most efficient for removing Th, U, and K. Subsequently, the radium, calcium, and barium contaminations were removed with MDM sorbent. After the impurities’ removal, the final Li2CO3 product was synthesized with NH4HCO3 sludge. The separation factors were derived by means of ICP-MS and HPGe analyses of the initial material, intermediate and final products. The study showed the optimum conditions of co-precipitation and sorption to reach a high yield and radiopurity of lithium carbonate used for low radioactive background experiments.

The introduction of digitization has changed all spheres of business on a global level, including geospatial data. In the Republic of Serbia, the process on this topic should begin with the introduction of the terms ePlan and eSpace. The general goal of the paper implies the construction and implementation of the ePlan as a future part of the eSpace for digital management of geospatial data, by creating co-creating value. For this purpose, the authors conducted research in which representatives of local self-governments and holders of public authority participated, by means of structured online research. The focus was on the digitization of urban and planning documents and the establishment a central database of spatial and planning documents in electronic format, and its further distribution through the one system. In that way, easy access to digital plan data expands the user community, and enables communication with different stakeholder groups. Ac-cording to the results of the research, the authors point out that it is necessary to form a new model for managing geospatial data through a eSpace system. This is achieved by shifting the focus from urban and spatial planning to other databases and their registers that are related to geospatial data. The goal of the paper indicates that it is necessary to raise the awareness of society, to introduce the concept of value co-creation, because conditions are created for the implementation of all measures aimed at digitization and management of electronic services in sustainable project society, at all countries.

Fungal plant diseases are a major threat to food security worldwide. Current efforts to identify and list loci involved in different biological processes are more complicated than originally thought, even when complete genome assemblies are available. Despite numerous experimental and computational efforts to characterize gene functions in plants, about ~ 40% of protein-coding genes in the model plant A. thaliana are still not categorized in the Gene Ontology Biological Process (BP) annotation. In non-model organisms, such as sunflower (Helianthus annuus), the number of BP term annotation is far fewer, ~22%. In the current study we performed gene co-expression network analysis using eight terabytes of public transcriptome datasets and performed expression-based functional prediction to categorize and identify loci involved in the response to fungal pathogens. We were able to construct a reference gene network of healthy green tissue (GreenGCN) and a gene network of healthy and stressed root tissues (RootGCN). Both networks achieved robust high quality scores on the metrics of guilt-by-association and selective constraints versus gene connectivity. We were able to identify eight modules enriched in defense functions, of which, two out of the three modules in the RootGCN were also conserved in the GreenGCN, suggesting similar defense-related expression patterns. We identified 16 WRKY genes involved in defense related functions and 65 previously uncharacterized loci now linked to defense response. In addition, we identified and classified 122 loci previously identified within QTL or near candidate loci reported in GWAS studies of disease resistance in sunflower linked to defense response. In all, we have implemented a valuable strategy to better describe genes within specific biological processes.

Some cancer cells rely heavily on non-essential biomolecules for survival, growth, and proliferation. Enzyme based therapeutics can eliminate these biomolecules, thus specifically targeting neoplastic cells; however, enzyme therapeutics are susceptible to immune clearance, exhibit short half-lives, and require frequent administration. Encapsulation of therapeutic cargo within biocompatible and biodegradable poly(lactic-co-glycolic acid) nanoparticles (PLGA NPs) is a strategy for controlled release. Unfortunately, PLGA NPs exhibit burst release of cargo shortly after delivery or upon introduction to aqueous environments where they decompose via hydrolysis. Here we show the generation of hybrid silica-coated PLGA (SiLGA) NPs as viable drug delivery vehicles exhibiting sub-200 nm diameters, a metastable Zeta potential, and high loading efficiency and content. Compared to uncoated PLGA NPs, SiLGA NPs offer greater retention of enzymatic activity and slow the burst release of cargo. Thus, SiLGA encapsulation of therapeutic enzymes, such as asparaginase, could reduce frequency of administration, increase half-life, and improve efficacy for patients with a range of diseases.

Films prepared from poly(3-hydroxybutyrate-co-4-hydroxybutyrate) copolymers produced by Aneurinibacillus sp. H1 using an automatic film applicator were homogeneous and had a defined thickness, which allowed a detailed study of physicochemical properties. Their properties were compared with a poly (3-hydroxybutyrate) homopolymer film prepared by the same procedure, which proved to be significantly more crystalline by DSC and XRD. Structural differences between samples had a major impact on their properties. With increasing 4-hydroxybutyrate content, the ductility and release rate of the model hydrophilic active ingredient increased significantly. Other observed properties, such as the release of the hydrophobic active substance, the contact angle with water and ethylene glycol, or the surface morphology and roughness, were also affected by the composition. The identified properties predetermine these copolymers for wide use in areas such as biomedicine or smart biodegradable packaging for food or cosmetics. The big advantage is the possibility of fine-tuning properties simply by changing the fermentation conditions.

Dyadic data contains co-occurrences of objects, which is often modeled by finite mixture model which in turn is learned by expectation maximization (EM) algorithm. Objects in traditional dyadic data are identified by names, causing the drawback which is that it is impossible to extract implicit valuable knowledge under objects. In this research, I propose the so-called attributed dyadic data (ADD) in which each object has an informative attribute and each co-occurrence of two objects is associated with a value. ADD is flexible and covers most of structures / forms of dyadic data. Conditional mixture model (CMM), which is a variant of finite mixture model, is applied into learning ADD. Moreover, a significant feature of CMM is that any co-occurrence of two objects is based on some conditional variable. As a result, CMM can predict or estimate co-occurrent values based on regression model, which extends applications of ADD and CMM.

A simplified nonlinear dispersive system of BBM-type, initially derived by D. Mitsotakis, is employed here in order to model the generation and propagation of surface water waves over variable bottom. The simplification consists in applying the so-called Boussinesq approximation. Using the finite element method and the FreeFem++ software, we solve numerically this system for three different complexities for the bathymetry function: a flat bottom case, a variable bottom in space, and a variable bottom both in space and in time. The last case is illustrated with the Java 2006 tsunami event. This article is designed rather as a tutorial paper even if it contains the description of completely new adaptation techniques.

This study investigated whether biogas reactor performance, including microbial community development, in response to a change in substrate composition is influenced by initial inoculum source. Test reactors were first started with two different inocula and operated with the same grass-manure mixture for more than 120 days. These reactors initially showed great differences depending on inoculum source, but eventually showed similar performance and overall microbial community structure. At the start of the present experiment, the substrate was complemented with milled feed wheat, added all at once or divided into two portions. The starting hypothesis was that process performance depends on initial inoculum source and microbial diversity, and thus that reactor performance is influenced by the feeding regime. In response to the substrate change, all reactors showed increases and decreases in volumetric and specific methane production, respectively. However, specific methane yield and development of the microbial community showed differences related to initial inoculum source, confirming the hypothesis. The different feeding strategies had however only minor effects on process performance and overall community structure, but still induced differences in the cellulose-degrading community and in cellulose degradation.

Today, with the increase in population, technological developments, industrialization and urbanization, the problems related to waste management (WM) have become increasingly important to sustainably global clean environment. The gradual change in the quality of the elements that make up the environment, increasing environmental problems, and gaining global quality have caused societies to focus more on environmental problems. Waste management is a form of management that includes the prevention, non-prevention, reuse, recovery, and disposal of domestic, medical, hazardous, and non-hazardous wastes. In this study, it is aimed to prioritize critical success factors with the Analytical Hierarchy Process (AHP) in industrial waste management and to determine the most important critical success factor. The four main criteria and 23 sub-criteria were scored by the AHP method by five expert environmental engineers. Accordingly, after critical success factors were determined, survey questions were prepared to make employees rank these factors. While "national/local waste management strategies and policies" factor was the most important critical success factor according to experts, the most important critical success factor for employees was "enterprise waste management strategies and policies". In addition, differences in the priorities of CSFs were found in the opinions of employees in different sectors.

This study aims to develop low-cost, eco-friendly and circular economy-compliant composite materials by creating three types of magnetorheological suspensions (MRSs) utilizing lard, carbonyl iron (CI) microparticles, and varying quantities of gelatin particles (GP). These MRSs serve as dielectric materials in cylindrical cells used to fabricate electric capacitors. The equivalent electrical capacitance (C) of these capacitors is measured under different magnetic flux densities (B≤160 mT) superimposed on a medium-frequency electric field (f = 1 kHz) over a period of 120 seconds. The results indicate that at high values of B, by increasing the GP content to 20 vol.% decreases the capacitance C up to about one order of magnitude compared to MRS without GP. From the measured data, the average values of capacitance Cm are derived, enabling the calculation of relative dielectric permittivities (ϵr′) and the dynamic viscosities (η) of the MRSs. It is demonstrated that ϵr′ and η can be adjusted by modifying the MRS composition and fine-tuned through the magnetic flux density B. A theoretical model based on the theory of dipolar approximations is used to show that ϵr′, η and the magnetodielectric effect can be coarsely adjusted through the composition of MRSs and finely adjusted through the values B of the magnetic flux density. The ability to fine-tune these properties highlights the versatility of these materials, making them suitable for applications in various industries, including electronics, automotive and aerospace.

Backgorund and Objectives: In this study, we aimed to evaluate and compare the changes in visual and structural outcomes in patients with intravitreal aflibercept (IVA)-resistant neovascular age-related macular degeneration (nAMD) switched to either intravitreal brolucizumab (IVBr) or intravitreal faricimab (IVF) injections in a clinical setting. Materials and Methods: This obser-vational clinical study included 20 eyes of 20 patients switched to brolucizumab and 15 eyes of 14 patients switched to faricimab for aflibercept-resistant nAMD. We measured the structural outcome (central macular thickness (CMT)) and the visual outcome (best-corrected visual acuity (BCVA); logMAR) as follows: just before the most recent IVA injection (B0), one month after the most recent IVA injection (B1), just before the first IVBr or IVF injection (A0), one month after (A1) and three months after (A3) the first IVBr or IVF injection. Results: BCVA showed significant im-provement at A1 (0.25 ± 0.34) and at A3 (0.19 ± 0.24) compared to A0 (0.38 ± 0.35) in IVBr group (p = 0.0156, p = 0.0166, respectively). CMT (μm) was significantly thinner at A1 (IVBr; 240.55 ± 51.82, IVF; 234.91 ± 47.29) and at A3 (IVBr; 243.21 ± 76.15, IVF; 250.50 ± 72.61) compared to at A0 (IVBr; 303.55 ± 79.18, IVF; 270.33 ± 77.62) in IVBr group (A1; p = 0.0093, A3; p = 0.0026) and in IVF group (A1; p = 0.0161, A3; p = 0.0093). There was no significant difference in BCVA and CMT improvement observed between two groups at any time point (p > 0.05 for all). Conclusion: Switching from aflibercept to either brolucizumab or faricimab has a significant anatomical ef-fect on eyes with aflibercept-resistant nAMD and both treatments appear to be effective short-term treatment options. There is a trend towards greater visual improvements and reductions in CMT with brolucizumab.

Plants are subjected to abiotic stresses throughout their developmental period. Abiotic stresses include drought, salt, heat, cold, heavy metals, nutritional element and oxidative stresses. Improving plant response to various environmental stresses is critical for plant survival and perpetuation. The WRKY transcription factors have special structure (WRKY structural domains), which enable WRKY transcription factors to have different transcriptional regulatory functions. The WRKY transcription factors can not only regulate abiotic stresses response and plant growth and development by regulating phytohormone signalling pathways, but also promote or suppress the expression of downstream genes by binding to the W-box [TGACCA/TGACCT] in the promoters of their target genes. In addition, WRKY transcription factors not only interact with other families of transcription factors to regulate plant defence responses in abiotic stresses, but also self-regulate by recognizing and binding to W-boxes in their own target genes to regulate their defence responses to abiotic stresses. However, in recent years, research reviews on the regulatory roles of WRKY transcription factors in higher plants are scarce and shallow. In this review, we focus on the structure and classification of WRKY transcription factors, as well as the identification of their downstream target genes and molecular mechanisms involved in the response to abiotic stresses, which can improve the tolerance ability of plants in abiotic stress and we also look forward to their future research directions, with a view to providing theoretical support for the genetic improvement of crop abiotic stresses tolerance.

The bentonite slurry trenches are becoming increasingly popular in the excavation process of trenches, especially for diaphragm wall construction. The problem that needs to be addressed is the stability of bentonite slurry trenches. This paper presents a stability analysis of trenches with temporary support of bentonite slurry, with unit weights ranging from 10.5 to 12.0 kN/m3, in the realistic stratum: C3 in the Hue city area. The analysis employs the shear strength reduction technique (SSR) with Mohr-Coulomb materials for the numerical method to evaluate the factor of safety (FS). The finite element method (FEM) software program (RS) and the finite difference method (FDM) FLAC software were applied. Additionally, the limit equilibrium method (LEM) of Bell-Washbourne and three-dimensional (3D) Bishop are used for calculating trench stability. The analysis results show a good agreement between RS2 and FLAC2D and RS3 and FLAC3D. Secondly, upon comparison, it is noted that the safety factors of the 3D software programs (RS3, FLAC3D) are higher than those of the 2D software programs (RS2, FLAC2D), ranging from 52.3 to 63.0% for trench lengths of 6m. However, for trench lengths of 54m, the safety factor values in 2D and 3D are nearly equal. Thirdly, the safety factor of the Bell-Washbourne method (LEM) is lower than the numerical analysis methods (FLAC and RS programs). Using the three-dimensional numerical method appears to be effective for estimating stability.

Thrombosis after severe acute respiratory syndrome coronavirus 2 vaccination is a serious complication in patients who have a thrombophilic predisposition. In this case, a female patient with no family history of thrombophilia who had pediatric antiphospholipid syndrome (APS) developed deep vein thrombosis (DVT) when she was 6 years old; 6 months after receiving a second dose of the BNT162b2 vaccine, DVT reoccurred. The original thrombi were found in the right common iliac vein and the inferior vena cava, with concomitant left pulmonary infarction. The patient was treated with anticoagulants for 6 years after DVT onset, with subsequent treatment cessation for 5 years without recurrence. She received the BNT162b2 vaccine at 17 years of age, 1 week before a routine outpatient visit. Platelet factor 4 elevation was detected 14 days after the first vaccination, persisting for 5 months without thrombotic symptoms. Six months after the second vaccine dose, the DVT recurred and was treated with a direct oral anticoagulant. The vaccine exacerbated the patient’s APS by activating coagulation, causing thrombosis recurrence. Platelet factor 4 levels may indicate coagulation status. When patients predisposed to thrombosis are vaccinated, coagulation status and platelet activation markers should be monitored to prevent DVT development.

Reactive oxygen species (ROS) play an important role in biological processes and offer hope for the development of effective treatments for ROS-dependent diseases, including cancer. The interaction of hydrogen peroxide with proteins stimulates the creation of chemical molecules that can weaken or stop the pathological process in cancer. However, reliable drugs have not yet been described. To understand the reason for the failure, we studied the behavior of ROS-containing compounds in cancer cells. The epidermal growth factor receptor (EGFR) is activated by interaction with a ligand protein, as well as by binding the chemical structure of hydrogen peroxide to the catalytic cysteine in the intracellular domain. Both mechanisms trigger signaling pathways in cells. The EGFR can be inactivated by protein tyrosinase phosphatase PTP-1B, which itself is activated by hydrogen peroxide. A simple in-gel fluorescence technique was used to demonstrate the rapid binding of hydrogen peroxide to a large number of proteins, including both activating and inactivating target proteins. Natural defense systems take longer to action and apparently cannot prevent hydrogen peroxide from binding to protect cells from exposure to unwanted proteins. Therefore, superoxide dismutase, which produces hydrogen peroxide, is not a suitable target for disease therapy.

(1) Background: Thrombophilia is a tendency towards hypercoagulability, and it is increased by pregnancy, peaking around delivery. Research question: does thrombophilia stimulate the in-flammatory state of the patient, already suppressed by pregnancy? (2) Methods: Eighty thrombo-philia patients admitted for delivery between 1/10/2017 and 1/12/2021 were prospectively stud-ied, together with eighty age- and para-matched control patients. Patients were admitted for de-livery at term by means of cesarean section. The inflammation indexes from the complete blood count values analysis during both the 24 hours before and after labor—extracted from the hospi-tal’s medical records—were calculated and then correlated with uterine involution. (3) Results: Except for the PLR, most of the numerous inflammation indexes studied were not significantly different in treated thrombophilia patients, before and after delivery, compared to non-thrombophilia patients. Only when we split the patients, based on the uterine haematometra in the first 24-48 hours postpartum, we found out that the few treated thrombophilia patients with haematometra (14 with haematometra out of 79 with treated thrombophilia) had elevated SII and AISI antepartum. In pregnant patients treated for thrombophilia, MLR is higher in pa-tients without the Rh factor than in those with the Rh factor. In non-thrombophilia patients, MCVL and NLPR increased with age and before labor, while SII and AISI increased with age postpartum. (4) Conclusions: Thrombophilia did not stimulate the inflammatory state of the pa-tient, already suppressed by pregnancy.

The CACCC-box motif emerges as a pivotal cis-regulatory element implicated in diverse developmental processes and diseases, particularly cardiovascular diseases (CVDs). This study centers on the intricate interplay between the CACCC-box and its binding proteins such as: the Krüppel-like family (KLF) of transcription factors as primary effectors in the context of CVDs. Our analysis was through a bioinformatics approach, which reveal significant transcriptional activity among KLF subgroup 2, exhibiting the highest number of interactions focusing on the established roles: pluripotency, cancer, and cardiovascular development and diseases. Our analysis reveals KLF's interactions with GATA4, MEF2C, NKX2.5 and other ~ 90 potential genes that participate in the regulation of the hypertrophic environment (or CVD's Environment). Also, the GO analysis showed genes containing the motif CACCC were enriched for multiple CVD’s, in combination with STRING analysis these results pointed to a link between KLFs and these diseases. The analysis further identifies other potential CACCC-box binding factors, such as SP family members, WT1, VEZF1, and -SALL4, which are implicated in cardiac contraction, remodeling, and inflammation processes.

Chlamydia trachomatis (Ct) infections are the most common sexually-transmitted infection (STI). Despite effective antibiotics for Ct, undetected infections or delayed treatment can lead to infertility, ectopic pregnancies, and chronic pelvic pain. Besides humans, chlamydia poses similar health challenges in animals such as C. suis (Cs) in pigs. Based on the similarities between humans and pigs as well as their chlamydia species, we use pigs as a large biomedical animal model for chlamydia research. In this study, we use the pig model to develop a vaccine candidate against Ct. The vaccine candidate consists of TriAdj-adjuvanted chlamydial protease-like activity factor (CPAF) protein. We tested two weekly administration options – twice intranasal (IN) followed by twice intramuscular (IM), or twice IM followed by twice IN. We assessed the humoral immune response not only in serum by CPAF-specific IgG including antibody avidity determination but also in cervical and rectal swabs by CPAF-specific IgG and IgA ELISAs. The systemic T-cell response was analyzed upon in vitro CPAF-restimulation via IFN-γ and IL-17 ELISpots as well as intracellular cytokine staining flow cytometry. Our data demonstrate that while the IN/IM vaccination mainly led to non-significant systemic immune responses, the vaccine candidate is highly immunogenic if administered IM/IN. This vaccination strategy induced high serum anti-CPAF IgG levels with strong avidity as well as high IgA and IgG levels in vaginal and rectal swabs and in uterine horn flushes. In addition, this vaccination strategy prompted a pronounced cellular immune response: Besides inducing IL-17 production, the vaccine candidate induced a strong IFN-γ response by CD4 T cells. In the IM/IN vaccinated pigs, these cells also significantly downregulated their CCR7 expression – a sign for differentiation into peripheral tissue homing effector/ memory cells. Conclusively, this study demonstrates strong immunogenicity of the IM/IN administered TriAdj-adjuvanted Ct CPAF vaccine candidate. Future studies will test vaccine efficacy of this promising Ct vaccine candidate. In addition, this project demonstrates suitability of the Cs pre-exposed outbred pig model for Ct vaccine development. Thereby, we aim to open the bottleneck of large animal models to facilitate the progression of Ct vaccine candidates into clinical trials.

Chronic inflammatory diseases are considered the most significant cause of death worldwide. Current treatments for inflammatory diseases are limited due to the lack of understanding of the biological factors involved in early-stage disease progression. Nerve growth factor (NGF) is a neurotrophic factor directly associated with inflammatory and autoimmune diseases like osteoarthritis, multiple sclerosis, and rheumatoid arthritis. It has been shown that NGF levels are significantly upregulated at the site of inflammation and play a crucial role in developing a robust inflammatory response. However, little is known about NGF's temporal expression profile during the initial progressive phase of inflammation. This study aimed to determine the temporal expression pattern of NGF in rat skin during Adjuvant-Induced Arthritis (AIA). Sprague Dawley rats were randomly divided into control and Complete Freund's Adjuvant (CFA) treated groups. Levels of NGF were evaluated following unilateral AIA at different time points and it was found that peripheral inflammation due to AIA significantly upregulated the expression of NGF mRNA and Protein in a biphasic pattern. These results suggest that NGF signaling is crucial for initiating and maintaining peripheral neurogenic inflammation in rats during AIA.

This study delves into the realm of potential therapeutics for breast cancer by conducting a comprehensive docking simulation and virtual screening analysis using Autodock Vina Algorithm. The focus based on the human epidermal growth factor receptor 2 (HER2), a key protein associated with various cancers, particularly in the context of breast cancer.The results reveal compelling insights into the binding interactions of several natural compounds and drugs with HER2. Notably, Acebilustat, Bemcentinib, and Amentoflavone exhibit outstanding binding energies, averaging around -10 kcal/mol, suggesting strong and favorable interactions with the HER2 target.These encouraging findings not only emphasize the potential biological significance of these compounds but also hint at their potential usefulness in fighting breast cancer.Their promising binding affinities with HER2 position them as potential candidates for further investigation and development as therapeutic agents against breast cancer.

This review article seeks to systematically identify appropriate ways to measure managerial skills. The systematic literature review was conducted according to the criteria in the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guide, and the eligibility criteria were declared through the PICOS tool (population, interventions, comparators, outcomes and study); a tool based on 6,803 records identified bibliometrically in the Web of Science database. The literature review stages determined a reduced set of articles that presented valid and reliable measurement scales covering some determinant constructs on managerial skills for employability such as fundamental, emotional, managerial, leadership, decision-making, communication and teamwork skills.

Resistance to therapy and disease progression are the main causes of mortality in most cancers. In particular, the development of resistance is an important limitation affecting the efficacy of therapeutic alternatives for cancer, including chemotherapy, radiotherapy, and immunotherapy. Signaling pathways are largely responsible for the mechanisms of resistance to cancer treatment and progression, and multiple myeloma is no exception. p38 mitogen-activated protein kinase (p38) is downstream of several signaling pathways specific to treatment resistance and progression. Therefore, in recent years, developing therapeutic alternatives directed at p38 MAPK has been of great interest, in order to reverse chemotherapy resistance and prevent progression. In this review, we discuss recent findings on the role of p38, including recent advances in our understanding of its expression and activity as well as its isoforms, and its possible clinical role based on the mechanisms of resistance and progression in multiple myeloma.

Both brain-derived neurotrophic factor (BDNF) and glucocorticoids (GCs) have multiple roles in the various aspects of neurons, including cell survival and synaptic function. BDNF and its receptor TrkB express in the central nervous system (CNS) neurons extensively, and contribution of BDNF/TrkB system in neuronal function is evident, thus, its downregulation has been considered to be involved in the pathogenesis of Alzheimer’s disease (AD). GCs, a stress-related molecule, and glucocorticoid receptor (GR) are also considered to be associated with AD, in addition to mental disorders such as depression. Importantly, a growing body of evidence suggest a close relationship between BDNF/TrkB-mediated signaling and GCs/GR system in the CNS. Here, we introduce current studies on the interaction among neurotrophic system and stress in CNS neurons, and discuss their involvement in the pathophysiology of AD.

The genetic engineering of plants often relies on the use of antibiotic or herbicide resistance genes for initial selection of primary transgenic events. Nevertheless, the commercial release of genetically modified crops containing any marker gene encounters several challenges stemming from the lack of consumer acceptance. Development of strategies enabled the generation of marker-free transgenic plants is a possible alternative to deal with public concerns over the safety of biotech crops. Leveraging the high in vitro regeneration and transformation capabilities of potato, this study examined the factors associated with the development of transgenic plants without presence of selective substances in medium. To compare the antibiotic-assisted with the antibiotic-free transformation, nodal explants from five highly regenerative potato cultivars were inoculated with the Agrobacterium strain AGL0 carrying the pBIN-mGFP5-ER (35SGFP/nosNPTII) plasmid. The efficiency of transient expression and the formation of chimeric and completely transgenic shoots were assessed through vital GFP observations. Under non selective conditions, the regeneration efficiency of stable non-chimeric transgenic shoots varied from 0.9 (‘Chicago’) to 2.7% (#12-36-42). In order to streamline transformation protocol, a specific timeline for collecting transgenic plantlets was established for each analyzed cultivar. This timeline strategy was implemented to generate transgenic potato plants, which demonstrated the suppression of homologous SteIF4Es family genes as a result of the successful introduction of the marker-free hpRNAi construct.

Objective: To analyze the relation between alterations in the growth hormone (GH)/insulin-like growth factor 1 (IGF-1) axis during the first 6 months of life and weight in children born in the Lower Middle São Francisco region. Methods: This is an analytical cohort, with a quantitative approach and a translational perspective. Thirty children with low and normal birth weight were initially identified in a hospital and reapproached at 3 and 6 months of age. Birth weight and alterations in GH/IGF-1 curves at birth, third month, and sixth month of life. Results: Weight gain during the 6 months of follow-up in newborns with low birth weight was greater compared to newborns with normal birth weight. All children who were born with low birth weight had an altered GH/IGF-1 curve at birth (p = 0.002). Most newborns with low birth weight maintained the alteration in the GH/IGF-1 curve at the third month of life (p = 0.027). Regarding the GH/IGF-1 curve at the sixth month, alteration persisted in greater proportion among children with low birth weight. Conclusion: Alterations in insulin resistance markers, demonstrated by increased GH without a proportional increase in IGF-1, were observed to be significant in children with low birth weight, with greater adiposity in this group, which may increase the risk of metabolic diseases in later life.

We compared the functional and morphologic effects in the loading dose between patients with treatment-naïve neovascular age-related macular degeneration treated with either intravitreal aflibercept (IVA) or intravitreal faricimab (IVF) injection in clinical settings. This retrospective study included 30 eyes from 28 patients who started IVA treatment between June and September 2022 and 30 eyes from 29 patients who started IVF treatment between October 2022 and March 2023. The mean best corrected visual acuity (BCVA) significantly improved from pre-treatment after loading dose in the IVA group (from 0.46 ± 0.46 to 0.36 ± 0.37, p=0.0047) and not in the IVF group (from 0.46 ± 0.41 to 0.44 ± 0.45, p=0.60). The mean central retinal thickness (CRT) significantly improved in both groups. The proportion of eyes with residual exudative change was greater in the IVF group than in the IVA group at 2 months after the first treatment. (p=0.026) We further analyzed the patients who obtained complete resolution of exudative changes after the loading dose. The IVA group had a significant improvement in BCVA, whereas the IVF group did not p=0.0047 and 0.20, respectively) Although IVA and IVF significantly improved the CRT, the BCVA improved significantly in IVA group and not in IVF group.

In this paper, I present a comprehensive theoretical framework for understanding surface-enhanced Raman scattering (SERS) measurements in both solution and thin film setups, focusing on electromagnetic enhancement principles. Two prevalent types of SERS substrates found in the literature are investigated: plasmonic colloidal particles, including spherical and spheroid nanoparticles, nanoparticle diameters, and thin-film-based SERS substrates like ultra-thin substrates, bundled nanorods, plasmonic, and porous thin films. The investigation explores the impact of analyte adsorption, orientation, and the polarization of the excitation laser on effective SERS enhancement factors. Notably, it considers the impact of analyte size on the SERS spectrum, by examining scenarios where the analyte is significantly smaller or larger than the hot-spot dimensions. The analysis also incorporates optical attenuations arising from the optical properties of the analyte and the SERS substrates. The findings provide possible explanations for many observations made in SERS measurements, such as variations in relative peak intensities during SERS assessments, reductions in SERS intensity at high analyte concentrations, and the occurrence of significant baseline fluctuations. The study offers valuable guidance for optimizing SERS substrate design, enhancing SERS measurements, and improving the quantification of SERS detection.

(1) Background: Thrombophilia is a tendency towards hypercoagulability, and it is increased by pregnancy, and peaking around delivery.; (2) Methods: 80 Eighty thrombophilia patients admitted for delivery between 1/10/2017 and 1/12/2021 were prospectively studied, together with 80 eighty age- and para-matched control patients. Patients were admitted for delivery at term by means of cesarean section. The inflammation indexes from the complete blood count values analysis, in during both the 24 hours before and the 24 hours after labor—, extracted from the hospital’s medical records—, were calculated, and then correlated with uterine involution.; (3) Results: In pregnant patients treated for thrombophilia patients, the patients who did not manage to have close their uterine cavity closed with in the first 24-48 hours had significantly higher SII and AISI inflammation indexes SII and AISI , than the onesthose who did manage to have their uterine cavity closed their uterine cavity. In pregnant patients treated for thrombophilia patients, MLR is higher in patients without the Rh factor than in those with the Rh factor. In non-thrombophilia patients, PLR was significantly higher as compared to treated thrombophilia patients. In non-thrombophilia patients, MCVL increased with age and, before labor, while SII and AISI increased with age, postpartum. ; (4) Conclusions: There may be an underlying inflammation state that persisted despite treatment in some pregnant thrombophilia pregnant patients.

The farnesoid X receptor (FXR)/βKlotho/fibroblast growth factors (FGFs) pathway is crucial for maintaining the intestinal barrier and preventing colorectal cancer (CRC). We used an FXR ago-nist, GW4064, and FXR knockout (KO) mice to investigate the role of FXR/Klothos/FGFs pathways in lipopolysaccharide (LPS)-induced intestinal barrier dysfunction and colon carcinogenesis. The results showed that upregulation of FXR in enterocytes effectively ameliorated intestinal tight junction markers (claudin1, Zonula occludens-1), inflammation, and bile acid levels, thereby protecting mice from intestinal barrier dysfunction and colon carcinogenesis. GW4064 treatment increased FXR, αKlotho, βKlotho, FGF19, FGF21, and FGF23 in wild-type mice exposed to LPS, while FXR KO mice had decreased levels. FXR KO mice exhibited elevated colon cancer markers (β-catenin, LGR5, CD44, CD34, Cyclin D1) under LPS, underscoring the pivotal role of FXR in inhibiting the development of colon tumorigenesis. The varying gut microbiota responses in FXR KO mice versus wild-type mice post-LPS exposure emphasize the pivotal role of FXR in pre-serving intestinal microbial health, involving Bacteroides thetaiotaomicron, Bacteroides acidifaciens, and Helicobacter hepaticus. Our study validates the effectiveness of GW4064 in alleviating LPS-induced disruptions to the intestinal barrier and colon carcinogenesis, emphasizing the importance of the FXR/αKlotho/βKlotho/FGFs pathway and the interplay between bile acids and gut microbiota.

(1) Background: Angiotensin II, a major culprit in cardiovascular disease, activates mediators that are also involved in pathological cardiac remodelling. We aimed at investigating the effects of two of them: aldosterone (Ald) and transforming growth factor-beta-1 (TGF-β1 ), on cardiac remodelling in an in vivo model. (2) Methods: Six-week-old male wild-type (WT) and TGF-β1 -overexpressing transgenic (TGF-β1 -TG) mice were infused with subhypertensive doses of Ald for 2 weeks, and/or treated orally with eplerenone from postnatal day 21. Heart’s ventricles were examined: by morphometry, immunoblotting to assess intracellular signalling pathways, RT qPCR to determine hypertrophy and fibrosis marker genes. (3) Results: TGF-β1 -TG mice spontaneously developed cardiac hypertrophy and interstitial fibrosis, exhibited higher baseline phosphorylation of p44/42 and p38 kinases, fibronectin and ANP mRNA expression. Ald induced a comparable increase in ventricular heart weight-to-body-weight ratio and cardiomyocyte diameter in both strains, but less pronounced increase in interstitial fibrosis in transgenic compared to WT mice (23.6% vs 80.9%, p&lt;0.005). Ald increased phosphorylation of p44/42 and p38 in WT but not TGF-β1 -TG mice. While eplerenone-enriched chow partially prevented Ald-induced cardiac hypertrophy in both genotypes and interstitial fibrosis in WT controls, it completely protected from additional fibrosis in transgenic mice. (4) Conclusions: Ald appears to induce cardiac hypertrophy independently of TGF-β1 , while in case of fibrosis downstream signalling pathways of these two factors probably converge

The main goal of the study is to assess the Decision criteria, and the determining factor for the sustainability of entrepreneurial startups in order to contribute towards social inclusion and capacity building. Both concepts are in the development phase and are the outcome of entrepreneurial ecosystem and individual behavior and traits. The current study observed the research problem as entrepreneurship and the entrepreneurial startups are the continuous phenomena required for every economy. The lack of an efficient ecosystem and incompetent trait of an entrepreneur drags the entrepreneurial startup to a failure. Therefore, an assessment on decision criteria and determining factors categorizing them with their importance may provide requisites to lead a successful entrepreneurial startup contributing to the social inclusion and capacity building. The study solved the research problem by statistical assessment of decision criteria and determining factors and categorizing them with their importance may provide requisites to lead a successful entrepreneurial startup. The research is built on research questions, objectives, conceptual model, and hypothesis which are tested based on the data collected. The collection of data was done through a survey questionnaire on a sample of established entrepreneurs. The study concludes that five components of decision criteria are Region, Competition, Funding Opportunities, Tax System, and Country Economic Situation, whereas the eight components Consciousness and Reliable, Pursuit Results, Flexibility, Stress Resistance, Skills Identification Exploitation Potential Market Opportunities, Leadership, Creativity and Innovation, and Delegation Decision Making of determining factor are required for a successful entrepreneurial startup to be able to work towards social inclusion and capacity building.

Polyhedral oligomeric silsesquioxane (POSS) is a suitable nanoscale reinforcement for thermosetting polymers, such as epoxy resin systems in order to modify its mechanical, thermal, and chemical properties. The inclusion of POSS in the epoxy resin at higher loading (greater than 1 wt.%), however, introduces the ductility during the fracture behavior of these nanocomposites. Consequently, the J-integral is used to quantify the fracture behavior of these materials and characterize the crack growth resistance curve against stable crack growth. A range of nanocomposites is prepared by adding 0.5, 1, 3, 5, and 8 wt.% of glycidyl POSS into DGEBF epoxy resin cured with an amine-based curing agent. From the fracture toughness experiment the load-displacement result confirms that when the POSS reinforcement is greater than 1 wt.%, the fracture behavior of the nanocomposite changes from brittle to ductile. For both brittle and ductile nanocomposites, the addition of POSS molecules improves the crack initiation toughness. The development of POSS–POSS compliant domains are reported previously, is attributed for this change in the failure behavior. The fractured images of POSS–epoxy nanocomposites, obtained using scanning electron microscopy, show that the increase in fracture resistance at higher values of POSS loading occurs due to the extensive shear yielding. Meanwhile, the increased fracture toughness at lower values of POSS loading occurs due to crack pinning and crack deflection.

Although deep learning has received extensive attention and achieved excellent performances in various of scenarios, it suffers from adversarial examples to some extent. Especially, physical attack poses more threats than digital attack. However, existing researches pay less attention to physical attack of object detection in remote sensing images (RSIs). In this work, we systematically analyze the universal adversarial patch attack for multi-scale objects in the remote sensing field. There are two challenges for adversarial attack in RSIs. On one hand, the number of objects in remote sensing images is more than that of natural images. Therefore, it is difficult for adversarial patch to show adversarial effect on all objects when attacking a detector of RSIs. On the other hand, the wide range of height of photography platform causes that the size of objects diverse a lot, which brings challenges for generating universal adversarial perturbation for multi-scale objects. To this end, we propose an adversarial attack method on object detection for remote sensing data. One of the key ideas of the proposed method is the novel optimization of adversarial patch. We aim to attack as many objects as possible by formulating a joint optimization problem. Besides, we raise a scale factor to generate a universal adversarial patch that adapts to multi-scale objects, which ensures the adversarial patch is valid for multi-scale objects in the real world. Extensive experiments demonstrate the superiority of our method against state-of-the-art methods on YOLO-v3 and YOLO-v5. In addition, we also validate the effectiveness of our method in real-world applications.

Large quantities of real-time particle data are becoming available from low-cost particle monitors. However, it is crucial to determine the quality of these measurements. The largest network of monitors in the United States is maintained by the PurpleAir company, which offers two monitors: PA-I and PA-II. PA-I monitors have a single sensor (PMS1003) and PA-II monitors employ two independent PMS5003 sensors. We determine a new calibration factor for the PA-I monitor and revise a previously published calibration algorithm for PA-II monitors (ALT-CF3). From the PurpleAir API site, we downloaded 83 million hourly average PM2.5 values in the PurpleAir database from Washington, Oregon, and California between January 1, 2017 and September 8, 2021. Daily outdoor PM2.5 means from 194 PA-II monitors were compared to daily means from 47 nearby Federal regulatory sites using gravimetric Federal Reference Methods (FRM). We find a revised calibration factor of 3.4 for the PA-II monitors. For the PA-I monitors, we determined a new calibration factor (also 3.4) by comparing 26 outdoor PA-I sites to 117 nearby outdoor PA-II sites. These results show that PurpleAir PM2.5 measurements can agree well with regulatory monitors when an optimum calibration factor is found.

This paper presents some results from a computational fluid dynamics (CFD) model of a multi-megawatt crosswind kite spinning on a circular path in a straight downwind configuration. The unsteady Reynolds averaged Navier-Stokes equations closed by the k−ω SST turbulence model are solved in the three-dimensional space using ANSYS Fluent. The flow behaviour is examined at the rotation plane, and the overall (or global) induction factor is obtained by getting the weighted average of induction factors on multiple annuli over the swept area. The wake flow behaviour is also discussed in some details using velocity and pressure contour plots. In addition to the CFD model, an analytical model for calculating the average flow velocity and radii of the annular wake downstream of the kite is developed. The model is formulated based on the widely-used Jensen’s model (Technical Report Risø-M; No. 2411, 1983), which was developed for conventional wind turbines, and thus has a simple form. Expressions for the dimensionless wake flow velocity and wake radii are obtained by assuming self-similarity of flow velocity and linear wake expansion. Comparisons are made between numerical results from the analytical model and those from the CFD simulation. The level of agreement was found to be reasonably good. Such computational and analytical models are indispensable for kite farm layout design and optimization, where aerodynamic interactions between kites should be considered.

In this paper, we examine the weak deflection angle and greybody factor of magnetized regular black hole. We implement the Gauss-Bonnet theorem on magnetized regular black hole to get the deflection angle. Moreover, we analyze the influence of plasma and non-plasma mediums on deflection angle of magnetized regular black hole. We observe the graphical behaviour of plasma and non-plasma mediums on deflection angle of magnetized regular black hole. Lastly, we study the rigorous bound phenomenon of the greybody factor of magnetized regular black hole. For this purpose we calculate greybody factor results and analyze the graphical behaviour of greybody bound for the different values of the parameters.

The Connor–Davidson Resilience Scale (CD-RISC) and the Brief Resilience Scale (BRS) are two widely used scales to measure resilience. Although both scales seek to assess an individual’s ability to recover from and adapt to disruptions or stressful events, they may capture different aspects of resilience. While the CD-RISC focuses on resources that can help individuals recover from and adapt to disruptions or stressful events, the BRS directly measures one’s ability to bounce back or be resilient. The aim of this study is to empirically examine the differences between the CD-RISC and the BRS. Two samples (n = 202, 246) consisting of undergraduate students from Taiwan were used. The results of confirmatory factor analysis show that the CD-RISC and the BRS are highly correlated but still distinct. The results of regression analyses show that the CD-RISC and the BRS have unique predictive effects on depression and life satisfaction. The research findings suggest that the CD-RISC and the BRS capture different aspects of resilience. For future research on resilience, researchers should pay attention to the differences between these scales and choose the one that most closely fits their research purpose.

In the context of carbon emissions peak, environmental issues highlight the importance of the green economy, how does economic agglomeration release growth potential and enable the coordinated development of the economy and environment? There are few works of literature to analyze it within the framework of spatial economy. This paper constructs a theoretical model to clarify the influence mechanism of economic agglomeration on green total factor productivity (GTFP), and then uses a dynamic SDM model to test the theoretical hypothesis. This contribution has three main findings. First, there is a "U-shaped" curve relationship between economic agglomeration and GTFP, and the formation mechanism is that economic agglomeration has a threshold effect on the agglomeration externalities such as infrastructure sharing, knowledge spillover, and labor market upgrading. Second, the mismatch of industrial structure is an important reason that the economic agglomeration in this region has not produced an obvious spatial spillover effect on other regions; Relaxing restrictions on the concentration of economic activity to regional centers would contribute to the improvement of GTFP. Third, GTFP has the classic "snowball effect" in the time dimension, but has the obvious "warning effect" in the space and time dimension. Based on this, this paper believes that at the present stage, it is necessary to adapt to the layout of economic geography, promote the rational allocation of human resources in the territorial space, promote the coordination between economic agglomeration and the development goal of green economy, and at the same time, it is necessary to cultivate the cooperative linkage mechanism of green economy development and transformation among cities.

Purpose: Obstructive sleep apnoea (OSA) affects patients’ quality of life and health. Magnesium (Mg) is an essential mineral and a potent antioxidant. Mg deficiency can worsen oxidative stress caused by sleep deprivation or disorders. The impact of OSA on serum Mg levels and its health consequences remain unclear. Methods: This study systematically reviewed clinical studies investigating the serum Mg levels of OSA patients and the potential relationships with other biomarkers.Results: Six articles were included for qualitative synthesis; five were used in quantitative analysis. Two out of four studies that compared OSA patients to healthy controls found them to have significantly lower serum Mg levels. Our meta-analysis with three studies shows that patients with OSA had significantly lower serum Mg with an effect size of -1.22 (95% CI: -2.24, -0.21). However, the mean serum Mg level of OSA patients (n=251) pooled from five studies (1.90 mg/dL, 95% CI: 1.77, 2.04) does not differ significantly from the normal range. OSA severity appears to affect serum Mg negatively. Serum Mg levels generally improve after treatment, coincide with the improvement of OSA severity. Low serum Mg levels correlate with worsening of cardiovascular risk biomarkers of C-reactive protein, ischaemia-modified albumin, and carotid intima-media thickness. The serum Mg levels also potentially correlate with biomarkers for lipid profile, glucose metabolism, calcium and heavy metals. Conclusions: Sleep deprivation appears to deplete Mg levels of OSA patients, making them at risk of Mg deficiency, which potentially increases systemic inflammation and the risk of cardiovascular and metabolic diseases.

The paper describes the Field Boundary Element Method applied to the fracture analysis of a 2D rectangular plate made of Functionally Graded Material to calculate Mode I Stress Intensity Factor. The object of the Field Boundary Element Method is the transversely isotropic plane plate. Its material presents an exponential variation of the elasticity tensor depending on a scalar function of position, i.e., the elastic tensor results from multiplying a scalar function by a constant taken as a reference. Several examples using a parametric representation of the structural response show the suitability of the method that constitutes a sight of Stress Intensity Factor evaluation of Functionally Graded Materials plane plates even in the case of more complex geometries.

Inflammasomes are multimolecular complexes with potent inflammatory activity. As such, their activity is tightly regulated at the transcriptional and post-transcriptional levels. In this review, we present the transcriptional regulation of inflammasome genes from sensors (e.g NLRP3) to substrates (e.g. IL-1β). Lineage-determining transcription factors shape inflammasome responses in different cell types with profound consequences on the responsiveness to inflammasome-activating stimuli. Pro-inflammatory signals (sterile or microbial) have a key transcriptional impact on inflammasome genes, which is largely mediated by NF-κB and, that translates into higher antimicrobial immune responses. Furthermore, diverse intrinsic (e.g. circadian clock, metabolites) or extrinsic (e.g. xenobiotics) signals are integrated by signal-dependent transcription factors and chromatin structure changes to modulate transcriptionally inflammasome responses. Finally, anti-inflammatory signals (e.g. IL-10) counterbalance inflammasome genes induction to limit deleterious inflammation. Transcriptional regulations thus appear as the first line of inflammasome regulation to raise the defense level in front of stress and infections but also to limit excessive or chronic inflammation.

This paper presents a concise exploration of several analytical methods for extracting the parameters of the single-diode model (SDM) of a photovoltaic (PV) module under standard test conditions (STC). The paper investigates six methods and presents the detailed mathematical analysis leading to the development of each method. To evaluate the performance of these methods, MATLAB-based software has been developed and deployed to synthesize the results of each method when used to extract the SDM parameters of various PV test modules of different PV technologies. Similar software has also been developed to extract the same parameters using well-established numerical and iterative techniques. A comparison is subsequently made between the synthesized results and those obtained using numerical and iterative methods. The comparison indicates that in spite of the fact that analytical methods may involve fair amount of approximations, their accuracy can be comparable to that of their numerical and iterative counterparts, with the added advantage of significant reduction in computational complexity, and without the initialization and convergence difficulties, which are normally associated with numerical methods.