This study explored what motivates university counselors. By analyzing various factors like personal values and work environment, they found counselors experience greater career satisfaction when their work aligns with their own values and societal impact, and when they receive recognition and opportunities for growth. Universities can utilize these findings to create a more supportive environment for counselors by highlighting their impact, offering development opportunities, and fostering a positive work culture. This can ultimately lead to a more motivated and effective counseling team, benefiting both the counselors and the students they serve.

This study concerns calculation and comparison of Fe, Co, Ni and Cu deposition rates in tungsten codeposition process based on electrodeposition of numerous tungsten alloys. 8 different tungsten alloys containing from 2 to 5 metals were electrodeposited in constant conditions in order to compare exact reduction rates. Calculated rates enabled control of the alloy composition precise enough to obtain a high-entropy WFeCoNiCu alloy with well-balanced composition. Introduction of copper to form the quinternary alloy was found to catalyze the whole process, increasing deposition rates of all components of the high-entropy alloy.

Pachychoroid neovasculopathy (PNV) is a pachychoroid-spectrum disease. As blood circulation throughout the choroid may be involved in PNV pathogenesis, analysis using ultra-wide-field (UWF) fundus imaging is crucial. We evaluated choroidal thickness after half-fluence photodynamic therapy (PDT) combined with intravitreal aflibercept injection for PNV using UWF swept-source optical coherence tomography. Seventeen eyes with PNV that underwent half-fluence PDT with adjuvant single intravitreal aflibercept injection were analyzed. To compare choroidal thicknesses in the central and peripheral choroids, we set subfields <3, <9, and 9–18 mm from the fovea. The <9- and 9–18-mm subfields were divided into four quadrants. Choroidal thickness in each subfield decreased significantly after half-fluence PDT (P<0.001); this reduction was more pronounced in the central area. We also investigated the relationship between the dominant side of the deep choroidal veins that harbor choroidal vein efflux from the macula. When choroidal thickness in the supratemporal and infratemporal 9x9-mm subfields were evaluated, the ratio of choroidal thickness reduction was not significantly different between the dominant and non-dominant sides. The dominant side was not associated with the extent of choroidal thickness reduction in PNV. In conclusion, half-fluence PDT caused thinning of the entire choroid, especially in the central area, in PNV.

Jujube (Ziziphus jujuba Mill.) stands as a pivotal fruit tree with significant economic, ecological, and social value. Recent years have witnessed remarkable strides in multi-omics-based biological re-search on jujube. This review began by summarizing advancements in jujube genomics. Subse-quently, we provided a comprehensive overview of the integrated application of genomics, tran-scriptomics, and metabolomics to explore pivotal genes governing jujube domestication traits, quality attributes (including sugar synthesis, terpenoids, and flavonoids), and responses to abiotic stress, and discussed the transcriptional regulatory mechanisms underlying these traits. Further-more, challenges in multi-omics research on jujube biological traits were outlined, and we pro-posed the integration of resources such as pan-genomics and sRNAome to unearth key molecules and regulatory networks influencing diverse biological traits. Incorporating these molecules into practical breeding strategies, including gene editing, transgenic approaches, and progressive breeding, holds the potential for achieving molecular-design breeding and efficient genetic en-hancement of jujube.

This analyses the impact of competition on liquidity creation in the banking industry of the United States. For the purposes of this paper panel data of US banks for the period of 1976-2000 is chosen as a sample. The plausible endogeneity issue is addressed by employing instrumental variables and then implementing two stages least squares method. Besides this, crisis period of 1990-1992 is also analyzed to compare effect with in “normal times”. The results show that decrease in the level of competition negatively affects the liquidity creation ability of banks in the US and this impact is even more negative during the crisis period.

A sensory profile provides important information on the qualitative and quantitative properties of cheeses. Thus, tasters must be trained with reference standards that allow the calibration of the panel around shared sensory definitions. The ideal standard is simple to prepare, easily reproducible, discriminant and specific for the product evaluated. Therefore, commercial products and pure chemicals, which are currently implemented as reference standards, are not suitable. Furthermore, the lack of common practices in the dairy sectors has been widely highlighted. This study aimed to establish new and reproducible reference standards for the gustatory and olfactory descriptors of cheeses. Using casein, maize starch, powder skimmed milk and k-carrageenan, a tasteless and odourless product like a fresh cheese was produced. At this matrix, 20 odour and taste compounds have been added to obtain standards that have been evaluated by 60 tasters so as to define their recognisability and perceived intensity. These cheese standards are easy to reproduce, are stable and exhibited good recognisability. Overall, the reference standards proposed are suitable for the panel training and are a starting point for standardising practices and lexicon, thus enabling the comparability of sensory studies on cheese.

Chagas disease, caused by the protozoan parasite Trypanosoma cruzi, stands as a significant public health challenge in endemic regions of the Americas. Current treatment options, limited and associated with adverse effects, underscore the need for novel therapeutic approaches. This systematic review comprehensively examines existing research on natural products as potential agents against Chagas disease. Employing a systematic search strategy across diverse databases, studies meeting predefined inclusion criteria were assessed for methodological quality and relevance. The synthesis of findings reveals a spectrum of natural products showcasing promising anti-Trypanosoma cruzi properties. The review discusses the limitations of current evidence, highlights gaps in knowledge, and proposes avenues for future research. By elucidating the landscape of natural products in Chagas disease treatment, this review contributes to the ongoing pursuit of innovative and accessible therapeutic strategies.

Based on acoustic fluid elements, dynamic analysis was performed on liquid sloshing modes and liquid-filled containers considering the fluid-structure interaction (FSI) effect. The liquid sloshing modes in two-dimensional (2D) and three-dimensional (3D) containers were analyzed, and the results were compared with liquid sloshing modes measured in tests and theoretically calculated modes. This thus verifies correctness of the simulation method based on acoustic fluid elements. Cylindrical liquid-filled containers with different water levels were subjected to modal analysis and dynamic and time-historical analysis. Results show that the finite element analysis (FEA) based on acoustic fluid elements can accurately simulate liquid sloshing modes in liquid-filled containers and vibration characteristics of these containers with different liquid levels. The vibration frequency of liquid-filled containers declines obviously with rising liquid level. The liquid level significantly affects distributions of the maximum displacement, maximum acceleration, and maximum von Mises stress on the sidewall of liquid-filled containers. Numerical simulations based on acoustic fluid elements provides an effective and reliable method for dynamic analysis of liquid-filled containers considering the FSI effect.

This scientific paper presents a comprehensive investigation into transient Fourier analysis in some electrical engineering applications. The article deals with two effective approaches for solving transient analysis whose application is rather novel. The first contribution uses combined the Fourier series analytic Laplace-Carson (L­C) transform methods in the complex domain using complex time vectors, thereby significantly simplifying the calculation of the original function. As the inverse transform goes back into the time domain, it employs the Cauchy-Heaviside (C­H) method. The second contribution uses the Fourier transform (F­Τ)for transient analysis of a power converter electrical circuit with the passive and the active load. The method of complex conjugated amplitudes is used for steady-state analysis. Both contributions represent a new approach to this paper. The starting point is the Fourier series/expansions, computation of the Fourier coefficients, then continuing by solving the steady and transient states of the system and confirming the transient states using the Fourier transform. To validate our findings, the worked-out analytical results are verified by modelling in Matlab/Simulink environment.

One of the main challenges in geodetic deformation analysis is to infer whether the geometry of some engineering structures or zones of natural hazards has changed from their initial state or not. The pillar that supports such an analysis is tightly based on the fundamentals of statistical hypothesis testing. The null hypothesis model indicates that no displacement has occurred. It is tested against a class of alternative models, which stipulate different displacement patterns. In this contribution, we present an innovative geodetic displacement detection which integrates combinatorial analysis and likelihood ratio tests into a sequential procedure for the case where the differences between observations of two epochs are in play. This framework is applied and investigated to two test scenarios: a synthetic and a real simulated trilateration network. From a statistical point of view, our approach is rigorous, because the alternative model can identify simultaneously more than one unstable point. In addition, the relationship between the unknown parameters and the observations is always linear, even if the problem manifests itself as non-linear. Consequently, we avoid a potential loss of statistical test power due to the model linearization. In addition, the proposed method controls the false positive rate efficiently. One of the problems that arise here is also related to the selection of the maximum number of points to be considered in the test procedure ( ). Here, we provide an innovative methodology based on rank computation of the design matrices to define , which can even be extended to the problem of outlier detection. Determining avoids the problem of having non-separable models in identifying unstable points. The algorithms and data are available in the repository.

The previous studies on the diversion pipe of pumped storage power stations (PSPS) primarily focused on numerical simulations of pulsating pressure propagation within the pipe and its inducing factors. However, there was a lack of field monitoring and analysis of measured data to support surface ambient vibration, resulting in insufficient credibility and practicality of the numerical results. Based on ambient monitoring and data analysis, this paper examines the factors contributing to the ambient vibration of the water diversion pipeline in Changlongshan (CLS) PSPS. It is concluded that: (1) The primary source of vibration originates from units operation-induced ambient vibrations; (2) Vibration during pumping conditions exceeds that during power generation conditions; (3) The ground measuring point's vibration acceleration primarily depends on the distance from the vibration source; (4) Different types of units have varying effects on water diversion pipeline vibrations.

This paper investigated reliability modeling for systems subject to dependent competing risks considering that the variation of failure threshold is not considered in most studies on competing failure reliability. Firstly, the variation of degradation quantity under shocks was analyzed, and the variation of threshold was considered on this basis. Secondly, the cumulative degradation under the influence of the random shock process was analyzed. The attractive property of copula is symmetry. Then, A linear Wiener process model is applied to model performance degradation failure, and a multi-performance-degradation correlated-competition model based on a Copula function is constructed, which considers the correlated competition between multiperformance degradation failures. Lastly, the micromotor system is used to analyze the applicability of the proposed model for bivariate instances. demonstrating the rationality and effectiveness of the proposed model.

In this paper, we present a groundbreaking methodology in the realm of aspect-level sentiment analysis, which capitalizes on the advanced capabilities of graph-based neural networks. Our approach, distinguished as the Aspect Correlation Graph Network (ACGN), represents a significant departure from conventional models. These traditional models often analyze aspects in isolation, failing to capture the intricate web of sentiment relationships that may exist within a single sentence. ACGN, however, is designed to address this gap by employing a sophisticated bidirectional attention mechanism, integrated with positional encoding. This unique combination not only enhances the model's ability to focus on relevant parts of the sentence but also aids in constructing detailed, aspect-focused representations. These representations are particularly crucial for understanding the nuanced interplay of sentiments associated with different aspects. Central to our model's architecture is the incorporation of a graph convolutional network. This network serves as a pivotal component in mapping and analyzing the complex network of sentiment correlations that can exist among various aspects within sentences. Through this integration, ACGN is able to unearth and interpret the subtle and often overlooked sentiment dynamics that traditional models might miss. Our comprehensive evaluations of the Aspect Correlation Graph Network, conducted using the SemEval 2014 datasets, have yielded promising results. These findings demonstrate a clear and significant advancement over the capabilities of existing models. Particularly, the results underscore the critical importance and utility of recognizing and understanding the connections between sentiments of different aspects in text analysis. This insight opens new avenues in the field of sentiment analysis, suggesting a broader application potential of ACGN in various contexts where understanding nuanced sentiment relationships is key. Overall, our study not only introduces a novel approach in aspect-level sentiment analysis but also sets a new standard for future research in this area. By highlighting the integral role of inter-aspect sentiment connections, ACGN paves the way for more sophisticated and accurate sentiment analysis tools, capable of handling the complexities of natural language with greater finesse and precision.

The receptor-type protein tyrosine phosphatases (RPTPs) are involved in a wide variety of physiological functions which are mediated via their diverse extracellular regions. They play key roles in cell-cell contacts, bind various ligands and are regulated by dimerization and other processes. Depending on the subgroup they have been described as everything from ‘rigid rods’ to ‘floppy tentacles’. Here we review current experimental structural knowledge on the extracellular region of RPTPs and draw on AlphaFold structural predictions to provide further insights into structure and function of these cellular signalling molecules.

(1) Background: Breast cancer (BC) is the second largest cause of mortality in female worldwide. Besides from basic risk factors, there are several hereditary variables that contribute to BC. Breast cancer has been linked to a variety of nuclear DNA changes as well as mitochondrial DNA alterations. The aim of this study was to analysis the association of mitochondrial tRNA leucine2 gene with BC. (2) Material and methods: In the current study, 24 samples have been collected from various families in Peshawar. DNA was extracted from Blood. PCR was used to amplify the mitochondrial tRNA MT-TL2 gene, and 22 samples were sequenced. The sequence was compared with accession #NC-012920.1 of the revised Cambridge Reference Sequence (rCRS). (3) Results: The results (Chromatograph, nucleotide sequence and rCRS alignment) shows mutations in mitochondrial tRNA MT-TL2 gene in our participants is not the cause of Breast cancer. (4) Conclusion: Yet, a significant number of BC patients must be studied, and their full mitochondrial DNA must be analyzed. This will provide an indication of the potential DNA marker that might be used to prevent BC deaths at the earliest stages.

This study develops a wavelet maxima-based methodology to extract anomalous signals from microwave brightness temperature (MBT) observations for seismic estimation. MBT, acquired via satellite microwave radiometry, enables subsurface characterization penetrating clouds. Five earthquake categories were defined contingent on locale (oceanic/terrestrial) and ambient traits (soil hydration, vegetal covering). Continuous wavelet transform was applied to preprocess annualized MBT readings preceding and succeeding prototypical events of each grouping, utilizing optimized wavelet functions and orders tailored to individualized contexts. Wavelet maxima graphs visually portraying signal intensity variations facilitated identification of aberrant phenomena, including pre-seismic accrual, co-seismic perturbation, and postsismic remission signatures. Casework found 10GHz horizontal-polarized MBT optimally detected signals for aquatic and predominantly humid/vegetative settings, whereas 36GHz horizontal-polarized performed best for arid, vegetated landmasses. This preliminary investigation establishes an analytical framework, albeit reliant on qualitative appraisals. Quantitative machine learning methods are warranted to statistically define selection standards and augment empirical forecasting leveraging lithospheric stress state inferences from sensitive MBT parametrization.

The growing adoption of distributed energy production technologies, and the potential of energy underutilization when it is produced by non-connected groups, has raised interest in ‘sharing economy’ concepts in the electricity sector. We suggest that mechanisms, such as peer-to-peer (P2P) energy trading, will allow users to exchange their surplus energy for mutual benefits, stimulate the adoption of renewable energy, encourage communities to ‘democratically’ control their own energy supplies for local development, and improved energy efficiency, and create many other benefits This approach is receiving increasing attention across the world, particularly in Germany, the Netherlands and Australia. Nevertheless, the actual development and implementation of these platforms is slow and mostly limited to trial activities. This study investigates the challenges and barriers facing P2P energy trading developments based on previous academic and industry studies. We provide a comprehensive multidimensional barrier analysis through a PESTLE approach to assess the barriers from a variety of perspectives, including the political (P), economic (E), social (S), technological (T), legal (L), and environmental (E) aspects. This approach clarifies the many intersecting problem fields of P2P trading in renewable energy, and the paper identifies a list of such barriers, and discusses the prospects for addressing these issues. We also elaborate on the importance of incentive-based P2P market design.

The purpose of this study was to determine the income, costs and revenue of the Gontor Putri 3 bakery. Want to know the efficiency of the bakery business in Karangbanyu Regency. The method used in this research is analytical descriptive by conducting a survey. The data used in this research is primary data. Data collection techniques use observation, interviews and documentation, while the process of analysis is quantitative descriptive. Using the R/C ratio, a value of 1.72 per month is obtained. This value indicates that the bakery factory in Karangbanyu is efficient because the value is more than one.

The LED light source is an important light source for indoor visible light communication. It has the characteristics of a large divergence angle and a high transmission rate. Therefore, using LED as the light source for visible light full-duplex communication can not only satisfy the lighting requirements but also transmit information at high speed. To analyze the factors that affect the optical power of the indoor single-light source visible light communication uplink receiving end, an indoor visible light communication model was established, and mathematical calculation formulas were derived based on the model establishment, and the maximum movable range formula of the retroreflective end under specific conditions was derived; The reliability of the formula was verified with the help of Zemax simulation software. Theoretical analysis and experimental results show that increasing the movement range of the retroreflective end can be achieved by increasing the lens diameter, reducing the focal length, and increasing the link distance.

Analysis of telomere length is an important component of many studies aiming to characterize the role of telomere maintenance mechanisms in cellular lifespan, disease, or in general chromosome protection and DNA replication pathways. Several powerful methods to accurately measure telomere length from Southern blots have been developed, but their utility for large-scale genomic studies has not been previously evaluated. Here we performed comparative analysis of two recently developed programs, TeloTool and WALTER, for extracting mean telomere length values from Southern blots. Using both software packages, we measured telomere length in two extensive experimental datasets for the model plant Arabidopsis thaliana, consisting of 537 natural accessions and 65 T-DNA mutant lines in the Col-0 reference background. We report that TeloTool substantially overestimates telomere length in comparison to WALTER, especially for values over 4,500 bp. Importantly, TeloTool and WALTER-calculated telomere length values correlate the most in the 2,100-3,500 bp range, suggesting that telomeres in this size interval can be estimated by both programs equally well. We further show that genome-wide association studies using datasets from both telomere length analysis tools can detect the most significant SNP candidates equally well. However, GWAS analysis with the WALTER dataset consistently detects fewer significant SNPs than analysis with the TeloTool dataset, regardless of the GWAS method used. These results imply that telomere length data generated by WALTER may represent a more stringent approach to GWAS and SNP selection for downstream molecular screening of candidate genes. Overall, our work revealed the unanticipated impact of telomere length analysis method on the outcomes of large-scale genomic screens.

The article concerns problems related to the assessment of reactive power in power networks with non-linear, fast-varying loads, such as electric arc furnaces, rolling mill drives, etc. The operation of this type of loads is characterized by the introduction of interharmonic currents (including higher harmonics) into the power supply network and a relatively low power factor. Rapid changes in the RMS value of the current also cause voltage fluctuations and the related phenomenon - flicker. Therefore, there is a need to evaluate the selection of power of compensating devices taking into account the random nature of load changes and the distortion of current and voltage waveforms, in particular interharmonic components, the impact of which has not been fully investigated so far. To analyze the random nature of load changes, autocorrelation functions were used, which allowed for the estimation of the expected values of the arc furnace current distortion coefficient (based on the recorded waveforms). In order to determine the parameters of reactive power compensating devices, and in particular capacitor banks, an autocorrelation function in the exponential-cosine-sine form was used, which meets the conditions of differentiation. The article contains comparative results of calculations of the reactive power of capacitor banks determined using different methods.

Introduction: EEGLAB is one of the most famous software for processing, analyzing, and researching experiments that have Electroencephalography (EEG) datasets. Due to the numerous and famous add-ins along with global, widespread communications and online free training, its popularity increased every year. Method: To address this phenomenon from a bibliographic perspective, we found 20,464 citations in Google Scholar for the main EEGLAB reference since 8/27/2023. Then, only the Web of Science (WOS) articles were 12,700 that they were extracted. The results were analyzed with Bibliometrix package from CRAN R software. Results: The time span of these articles is from 2004 to 2023 with 12,700 documents in 1,125 sources (journals, books, etc.), 29,125 authors, 19,062 author’s keywords, 13,707 keywords PLUS, 279,617 references. The annual growth rate is 28.12 %, international Co-authorship is 37.27 % and Co-authors per document is s 4.89 and the average citations per document is 22.51. The most relevant sources are Neuroimage, Frontiers in Human Neurosciences, Scientific Reports, Psychophysiology, and PLOS One with 780, 526, 446,425, and 371 articles, respectively. The most cited countries are the USA, Germany, and the United Kingdom with 93,093, 32,621, and 20,748 total citations, respectively. The ERPLAB, ADJUST, and ICLabel add-ins have the local to global citation ratios equal to 85.4%, 65.1%, and 78.2% respectively. Other bibliometric analyses such as co-occurrence networks and thematic maps of abstracts, titles, and keywords are estimated and presented. Conclusions: EEGLAB is among the most cited MATLAB toolboxes in computational neuroscience. Many developed and developing countries use it in their research publications.

Using numerical software to establish a three-dimensional geological model of shield tunneling through fault fracture zones, considering the synchronous grouting effect at the shield tail, the disturbance of various geotechnical structures in the fault fracture zone under deep burial and high water pressure conditions is studied. According to the comparison between the numerical model analysis results and the on-site inspection results of the entire process of Shiziyang B3 section, synchronous grouting at the shield tail is the main reason for the changes in soil and water pressure in the fault fracture zone area. The soil and water pressure changes strongly during shield tunneling, and the maximum excess pore pressure value occurs when the shield tail passes. When the shield tunneling machine is far away, the soil and water stress shows a downward trend. The impact of synchronous grouting decreases with the increase of tunneling distance. Due to the difference in permeability, the variation law of pore pressure in the fault fracture zone is significantly different from the original rock, leading to a faster increase in pore pressure in the fracture zone area and a wider range of influence.

Background and Aims: Paramedics attend an unprecedented number of drug poisoning events daily in British Columbia (BC), Canada due to the ongoing public health crisis related to an increasingly toxic and unregulated supply of illicit drugs. Paramedics have the potential to support alternative models of care to reduce harm, but their perspectives towards harm reduction initiatives are polarized. Understanding the drug-related substance use content in paramedic curriculum documents is important for deploying effective harm mitigating programs. The objective of this study was to understand what drug-related substance use content currently exists within paramedic curriculum documents in British Columbia. Methods: We performed a document analysis of curriculum documents in BC’s paramedic training institutions, the primary program textbook, and the 2011 National Occupational Competency Profile (NOCP). We used the Checklist for Assessment and Reporting of Document Analysis (CARDA) tool to perform our analysis. We analysed and coded documents both inductively and deductively and subsequently combined, refined, and used the codes to inform the development of themes via reflexive thematic analysis. Results: Of the 44 documents analysed, 22 included codes relevant to the research questions. Paramedics are primarily taught to care for people who use drugs in an acute drug-poisoning response only, with little consideration of holistic care, and no meaningful mention of harm reduction. Some stigmatizing language was found within the content. Conclusions: Many opportunities to introduce holistic models of care for people who use drugs along the entire continuum of care are unaddressed by paramedic curriculum documents in BC. Curriculum developers should include people who have lived and living experience of drug use in the co-design of educational programs involving their care. Further qualitative analyses are required to evaluate the relationship between paramedic education and provider-based stigma.

The phenomenon of Airbnb has significantly permeated the urban housing markets of major U.S. cities. This qualitative analysis meticulously examines its wide-ranging impacts, exploring Airbnb’s operational model, regulatory challenges, and its influence on housing availability, prices, and neighborhood dynamics. The research aggregates insights from various sources, including academic articles, web-based resources, and case studies, providing a nuanced understanding of the intricate balance cities are endeavoring to achieve between the economic opportunities Airbnb presents and the potential strains it places on local housing markets. The paper also scrutinizes the evolving policy frameworks and their effectiveness in mitigating the impacts of short-term rental platforms. Furthermore, it deliberates on future trends in the short-term rental market and the wider implications for the sharing economy. Concluding, the paper acknowledges the limitations of the qualitative method and suggests areas for future in-depth research, aiming to offer insightful contributions to policymakers, researchers, and urban planners engaged in urban housing discourse in the United States.

The role of desmoglein-3 (DSG3) in oncogenesis is unclear. This study aimed to uncover molecular mechanisms through comparative transcriptome analysis in oral cancer cells, defining potential key genes and associated biological processes related to DSG3 expression. Four mRNA libraries of oral squamous carcinoma H413 cell lines were sequenced and 599 candidate genes exhibited differential expression between DSG3-overexpressing and matched control lines, with 12 genes highly significantly differentially expressed, including 9 upregulated and 3 downregulated. Genes with known implications in cancer, such as MMP-13, KRT84, OLFM4, GJA1, AMOT, and ADAMTS1, were strongly linked to DSG3 overexpression. Gene ontology analysis indicated that the DSG3-associated candidate gene products participated in crucial cellular processes such as junction assembly, focal adhesion, extracellular matrix formation, intermediate filament organization, and keratinocyte differentiation. Validation of RNA-Seq was performed through qRT-PCR, Western blotting, and immunofluorescence analyses. Furthermore, transmission electron microscopy meticulously examined desmosome morphology, revealing slightly immature desmosome structure in DSG3-overexpressing cells compared to controls. No changes in desmosome frequency and diameter were observed between the two conditions. This study underscores intricate and multifaceted alterations associated with DSG3 in oral squamous carcinoma cells, implying a potential oncogenic role of this gene in biological processes that enable cell communication, motility and survival.

Single-particle cryo-electron microscopy (cryo-EM SPA) has recently emerged as an exceptionally well-suited technique for determining the structure of membrane proteins (MPs). Indeed, in the last years, it was observed a huge increase in the number of MPs solved by cryo-EM SPA at a resolution better than 3.0 Å in the Protein Data Bank (PDB). However, sample preparation remains a significant challenge in the field. Here, we evaluated in the MPs solved by cryo-EM SPA deposited in the PDB in the last two years at a resolution below 3.0 Å the most critical parameters for sample preparation: i) the surfactant used for protein extraction from the membrane, ii) the surfactant, amphiphiles, nanodiscs or other molecules present in the vitrification step, iii) the vitrification method employed, and iv) the type of grids used. The aim is not to provide a definitive answer on the optimal sample conditions for cryo-EM SPA of MPs, but rather assess the current trends in the MP structural biology community towards obtaining high-resolution cryo-EM structures.

The benchmarking of hotel energy use comprehensively identifies the controllable and uncontrollable factors affecting energy performance, including building characteristics, management strategies, operations, and maintenance systems. Other factors include climatic conditions, floor areas, operating hours, occupancy rates, and guest populations. A benchmarking study on energy consumption patterns in significant hotels (each with less than 100 rooms and an average staff strength of 40 employees), situated in the university town of Nsukka (longitude 70 23' E, latitude 60 52' N), Nigeria, was performed using the data envelopment analysis (DEA) methodology. DEA, a linear programming technique that measures the relative performances of units, was chosen as a benchmarking methodology due to its ability to handle multiple inputs and outputs. Following a correlation test, energy use intensity, diesel consumption, and the number of employees were selected as the analysis inputs, while the occupancy rate was chosen as the output variable. Data on these variables spanning 12 months were collected using questionnaires, interviews, site visits, and oral conversations with hotel managers to ensure validity. Grid-supplied electricity accounted for most of the hotels' energy needs, followed by diesel used in generators. More than 70% of the electricity use was for HVAC. From the DEA, Hotel 3 (DMU H3) had a technical efficiency score of 1, whereas adjustments were recommended for improving the efficiency scores of the other hotels, which were deemed inefficient. DMU H7 had the lowest efficiency score (0.474) and the highest identified savings for electricity and diesel. The analysis also revealed that occupancy rates were generally low in the months of June and July, coinciding with the high rainfall season with its accompanying decline in outdoor activities. Consistent with this, electricity consumption was highest in the Christmas and Easter holiday months of December, January, and April following increased travel-related activities.

The purpose of this study was to investigate the functional load capacity of the periodontal ligament (PDL) in a full arch maxilla and mandible model using numerical simulation. The goal of was to determine the functional load pattern in multi- and single rooted teeth with full and reduced periodontal support. CBCT data were used to create 3D-models of a maxilla and mandible. The DICOM dataset was used to create a CAD-model. For a precise description of the surfaces of each structure (enamel, dentin, cementum, pulp, PDL, gingiva, bone), each tooth was segmented separately, and the biomechanical characteristics were considered. A Finite-Element-Analysis (FEA) software computed the biomechanical behavior of stepwise increased force of 700N in cranial and 350N in ventral direction of the muscle approach of the Masseter muscle. The periodontal attachment (cementum-PDL-bone contact) was subsequently reduced in 1mm increments and the simulation repeated. Quantitative (pressure, tension, and deformation) and qualitative (color-coded images) data were recorded and descriptively analyzed. The teeth with the highest load capacities were the upper and lower molars (0.4-0.6MPa), followed by the premolars (0.4-0.5MPa) and canines (0.3-0.4MPa) when vertically loaded. Qualitative data showed that the area with the highest stress in the PDL were for single rooted teeth the cervical and apical area and for molars additionally the furcation roof. In both, single- and multi rooted teeth the gradual reduction of the bone levels caused an increase of the load on the remaining PDL. Cervical and apical areas as well as the furcation roof are the zones with the highest functional stress. The more bone loss, the higher the mechanical load on the residual periodontal supporting structures.

The Apetala2/ethylene response factor superfamily refers to a group of transcription factors that share a conserved AP2 DNA binding domain. These factors have been found to have different roles in plant responses to both biotic and abiotic stresses. Samples of hexaploid wheat, tetraploid pasta (or durum wheat), and diploid wheat progenitors were selected. The 29 dehydration-responsive element binding transcription factors in these samples were downloaded from NCBI GenBank for six different countries: Iran, China, Italy, France, Afghanistan, and Azerbaijan. The AP2 domain sequences were identified from the dehydration-responsive element binding transcription factors using PROSITE, ProDom, and SMART software. Next, all sequences were aligned using Multalin and Jalview software. The aligned sequences were then analyzed to identify amino acid locations, types, and frequencies. The multiple alignments showed that approximately 76% of the amino acid residues in the AP2 domains are conserved. According to the amino acid analysis, alanine, serine, and glutamic acid are the most abundant amino acids found in three motifs. The performed phylogenetic analysis illustrates the role of geographical effects on the transcription factor sequences of bread wheat in the Middle East. Significant differences were found between Iranian and Chinese transcription factor sequences. Moreover, genetic variation was observed in the transcription factors of Italian sequences found in pasta and wheat progenitors. Motif structures play a critical role in the domain organization of wheat proteins to enhance the characteristics of assorted metabolic pathways. The structure of the AP2 domain was analyzed by several programs, I-TASSER for instance, to identify the α-helix, β-sheets, and the regions of some significant amino acids in the 3-D model.

This article is a logical continuation of the work of Nuritdinov et al. (2021). We analyzed space observations of the apparent surface density of 81 globular clusters (GCs) observed by GAIA DR2 and published in de Boer et al (2019). First, we studied the features of the quality of the GC surface density data, including comparing them with the HST data. Using our 3-parameter model, previously tested on the example of HST space observations, we found the values of the stellar concentration parameter towards the center of the cluster. As a result, we found good correlations of this parameter with the physical characteristics of the GCs. We have also found the corresponding empirical formulas for this parameter.

With the view toward enlivening the Chinese automobile market, this work seeks to develop a framework to reveal the tastes of Chinese car users from online user-generated content (UGC) and identify future product improvement orientation. We construct an importance-satisfaction gap analysis (ISGA) model based on sentiment analysis technique. Specifically, a novel unsupervised word-boundary-identified algorithm for the Chinese language is used to extract domain professional feature words and a set of sentiment scoring rules is constructed. By matching feature-sentiment word pairs, we calculate car users' satisfaction with different attributes based on the rules, and weigh the importance of attributes using TF-IDF method, which lay the statistic foundation for our ISGA model. We also take time into account and further analyze the ISGA model, aiming to provide new insight into the changing tastes of Chinese car users so as to suggest correct design positioning and resource allocation. The final evaluation results show that the method proposed in this paper, which integrates Chinese word-boundary-identified algorithm and sentiment lexicon matching rules, is well supported.

In the last 20 years, the share of renewable energy sources in the production of electricity in the European Union has doubled, from about 15% to almost 35%. The main driver of this development has been the increase in the share of wind energy and solar photovoltaic energy. The authors aim to analyze the influencing factors that affect the energy transition process applied to nautical tourism, from polluting energy to renewable solar energy. The authors' research approach consists in using the framework offered by the energy transition process from the perspective of the socio-technical and economic approach, by applying the qualitative research method with a deductive approach. The tool used to achieve the objective was the semi-structured interview. The research unitarily, holistically, and specifically approaches the problem of energy transition from polluting sources to renewable ones offered by solar energy, in the case of nautical tourism with direct implications on the specific industry in the Netherlands. The research results are structured in the fields of technology, governance, economics, and user preferences. This research has the potential to provide support to find optimal solutions that encourage users to accelerate the energy transition process by adopting sustainable solutions for nautical tourism.

In recent years, groups of cyber criminals/hackers have carried out cyber-attacks using various tactics with the goal of destabilizing web services in a specific context for which they are motivated. Predicting these attacks is a critical task that assists in determining what actions should be taken to mitigate the effects of such attacks and to prevent them in the future. Although there are programs to detect security concerns on the internet, there is currently no system that can anticipate or foretell whether the attacks will be successful. This research aims to develop sustain-able strategies to reduce threats, vulnerability, and data manipulation of chatbots, consequently improving cyber security. To achieve this goal, we develop a conversational chatbot, an application that uses artificial intelligence (AI) to communicate, and deploy it on social media sites (e.g., Twitter) for cyber security purposes. Chatbots have the capacity to consume large amounts of information and give an appropriate response in an efficient and timely manner, thus rendering them useful in predicting threats emanating from social media. The research utilizes sentiment analysis strategy by employing chatbots on Twitter (and analyzing Twitter data) for predicting future threats and cyber-attacks. The strategy is based on a daily collection of tweets from two types of users: those who use the platform to voice their opinions on important and relevant subjects, and those who use it to share information on cyber security attacks. The research pro-vides tools and strategies for developing chatbots that can be used for assessing cyber threats on social media through sentiment analysis leading to a global sustainable development of businesses. Future research may utilize and improvise on the tools and strategies suggested in our research to strengthen the knowledge domain of chatbots, cyber security, and social media.

In this study, we construct a new Atangana-Baleanu fractional model for whooping cough disease to predict future dynamics of the disease, as well as to suggest strategies to eliminate the disease in an optimal way. We prove that the proposed model has a unique solution which is positive and bounded. To measure contagiousness of the disease, we determine the reproduction number R0 and use it to examine the local and global stability at equilibrium points that have symmetry. Through sensitivity analysis, we determine parameters of the model that are most sensitive to R0. The ultimate aim of this research is to analyze different disease prevention approaches in order to find the most suitable one. For this, we include the vaccination and quarantine compartments in the proposed model and formulate an optimal control problem to assess the effect of vaccination and quarantine rates on disease control in three distinct scenarios. Firstly, we study the impact of vaccination strategy and conclude findings with presentation of graphical results. Secondly, we examine the impact of quarantine strategy on whooping cough infection with possible elimination from the society. Lastly, we implement vaccination and quarantine strategies together to visualize their combine effect on infection control. In addition to the study of an optimal control problem, we examine the effect of fractional order on disease dynamics as well as the impact of constant vaccination and quarantine rates on disease transmission and control. We determine that the optimal control strategy with the three controls is more effective in reducing the spread of whooping cough infection. Implementation of Toufik-Atangana type numercial scheme both for the state and adjoint equations is another contribution of this article.

Embryo quality evaluation during in vitro development is vital for the success of assisted reproductive technologies (ART). However, the subjective morphological assessment by embryologists may result in inconsistencies that affect the selection of the best embryo for transfer. To provide a more comprehensive evaluation of embryo quality, we performed the integration of embryo metabolomics with standardized morphokinetic classification. The culture medium of 55 embryos (from 21 couples undergoing ICSI) was collected at two timepoints (day 3 and 5). Samples were split into Good (n=29), Lagging (n=19) and Bad (n=10) according to embryo morphokinetic evaluation. Embryo metabolic performance was assessed by 1H-NMR, monitoring the variation of specific metabolites (pyruvate, lactate, alanine, glutamine, acetate, formate). Adjusted metabolite differentials were observed during the first three days of culture and found to be discriminative of embryo quality at the end of day 5. Pyruvate, alanine, glutamine, and acetate were major contributors to this discrimination. Good and Lagging embryos were found to export and accumulate pyruvate and glutamine in the 3 first days of culture, while Bad embryos consumed them. This suggests that Bad embryos have a less active metabolism than Good and Lagging embryos and these two metabolites as putative biomarkers for embryo quality. This study provides a more comprehensive evaluation of embryo quality and can lead to improvements in ART by enabling the selection of the best embryos. By combining morphological assessment and metabolomics, the selection of high-quality embryos with the potential to result in successful pregnancies may become more accurate and consistent.

The theory of electron spin has been proposed for a century, but the study of quantum effects in biological molecules is still in its infancy. Chirality-induced spin selectivity (CISS) is a very modern theory that can explain many biochemical phenomena. In this paper, we propose a new theoretical model based on CISS theory and quantum chemistry theory, which can well explain the theoretical explanation of the chiral selectivity of chiral proteins. Moreover, this theory can predict the spin state of corresponding chiral molecules. Taking L-DOPA and AADC enzyme as examples, this theoretical model solves the theoretical explanation of AADC enzyme's chiral catalysis selectivity problem and successfully predicts the spin state of L-DOPA and D-DOPA's valence electrons.

To achieve sustainable development during urbanization, construction waste is recycled for use as an aggregate in recycled concrete (RC). To determine the influence of the brick content in coarse recycled aggregates on the damage sustained by the resultant RC, the RC was first divided into seven phases: natural crushed stone, old gravel inside waste concrete, bricks, new mortar, old mortar on waste concrete surfaces, and new and old interface transition zones. The Monte Carlo method was then applied to establish a two-dimensional random aggregate model of the RC made with coarse brick aggregates. The ABAQUS software package was used to simulate a uniaxial compression test, the results of which were combined with those of a macro-test to determine the internal damage change rule of brick-containing RC. The stress–strain curves obtained from the simulation coincided well with that of the macroscopic tests. As the brick content increased, the damage zone inside the specimen and the number of microcracks increased. The stress concentration area decreased, as indicated by a lower compressive strength in the macro-test. The results indicate that higher brick contents in RC yield more initial damage inside the concrete and a lower compressive strength.

Under inflammatory conditions including lymphatic disorders, bone marrow-derived myeloid cells often express lymphatic endothelial cell (LEC) markers called LEC progenitor cells, which extend lymphatic vessels by fusing with existing lymphatic vessels. However, studies on the mechanism of lymphatic regeneration using three-dimensional images of lymphatic structures are limited. In this study, scanning electron microscopy (SEM) was used to observe the three-dimensional structure of lymphangiogenesis in a mouse model of secondary lymphedema. The model was established in C57BL/6J mice via circumferential incision in the inguinal region of the left hind limb. Skin samples were obtained from the lymphedema region on days 2, 5, and 8 after surgery. To determine lymphatic vessel positions using SEM analysis, we detected anti-lymphatic vessel endothelial hyaluronan receptor 1 (LYVE-1) immunoreactivity in serial sections and overlaid them during SEM observation. On days 2 and 5, spherical cells, probably myeloid cells, were attached and fused to the LYVE-1-positive lymphatic vessel walls. On day 8, spherical cells were converted to string-shaped cells, forming a new lymphatic vessel wall resembling an intraluminal pillar. Our results show the three-dimensional lymphatic structures formed during lymphatic regeneration.

The objective of this study is to investigate the use of excavation behavior prediction and analysis software in the field of civil en-gineering. PLAXIS and SoilWorks, widely used in the engineering and academic communities, were employed as research tools for analyzing gravel layers and deriving appropriate ranges of soil elastic modulus for different software programs. By collecting excavation cases in the Xindian area of New Taipei City, Taiwan, and conducting deep excavation analysis using the displacement of retaining walls, this study provides recommended ranges for localized selection of soil elastic modulus. The suggested range for PLAXIS is 7,840 N/m² to 9,800 N/m², while Soil-Works suggests a range of 2,450 N/m² to 3,430 N/m². These ranges allow for reasonable estimation of maximum deformations during the final excavation stage. Based on the research findings, it is recommended that engineers refer to the provided ranges when selecting soil elastic modulus for excavation analysis in gravel layers using different soft-ware programs in the Xindian area of Taiwan to improve the accuracy of deformation predictions during the final excavation stage. These results serve as important references for engineers and contribute to the effective prediction and management of excavation behavior in civil engineering projects.

The South African government introduced a nationwide lockdown in March 2020 to mitigate the spread of Covid-19. Among other restrictions, the government banned the sale of tobacco products, which lasted for nearly five months. We performed a Google search using the keywords smok*, puff*, lockdown, tobacco, and cigarette*, for articles published in English from 23 March 2020to 18 December 2020 and analysed 441 online media articles. We identified the main arguments made by proponents and opponents of the tobacco sales ban, which were categorised into themes. Three themes were prominent: medical, legal, and economic/financial. Legal aspects were covered in 48% of articles, followed by economic (34%), and medical aspects (18%). The media was generally ambivalent about the tobacco sales ban during the first five weeks of lockdown. Sentiment then turned against the ban. because the medical rationale was not well communicated by the government, there was limited empirical evidence of a link between smoking and contracting Covid-19, and the sales ban was ineffective, since most smokers still purchased cigarettes. Policy framing in the media plays an important role in how the public receives the policy. Any future tobacco control policy intervention should be well-considered and appropriate cessation support services offered.

To increase the efficiency of fuel processor and HT-PEMFC (High Temperature-Proton Exchange Membrane Fuel Cell) combined system, it is essential to improve the efficiency of a fuel processor. In this research, the fuel processor was simulated by Aspen Hysys® simulator, and effect of the various operating conditions on the total efficiency was investigated. Thermal efficiency of the fuel processor increased as the temperature and S/C (Steam to carbon) ratio increased, and the efficiency was higher at the S/C ratio of 3 than at the S/C of 4 at the reformer temperature of 700 ℃ and higher. Under the selected operating conditions of the fuel processor, recycling of unreacted hydrogen from the anode off gas (AOG) of the HT-PEMFC improve the overall efficiency of the combined fuel processer and HT-PEMFC by a factor of 1.28. Operating conditions where the AOG supplied excessive heat than required for fuel processor operation were excluded. The high-efficiency operating conditions of the fuel cell system were proposed with the target of 5 kW of output as the capacity of the household HT-PEMFC.

The North Railway in the Kingdom of Saudi Arabia (KSA) extends over vast areas, crossing various terrains, including valleys, sand veins, plateaus, and hills. Therefore, the Railway was designed and implemented to suit this environmental diversity under the highest safety standards. However, the Railway may be subject to hazards for various reasons. In general, the possibility of direct surface runoff disasters increases if there are residential areas and facilities within the boundaries of drainage basins. Therefore, these areas should be studied, and the degree of hazard in drainage basins should be accurately determined. Hence, this study analyzed the degree of risk of 14 drainage basins affecting the North Train railway within the Wadi Malham drainage basin, using the risk degree model with eight parameters that have hydrological indications to give an idea of the behavior of direct surface runoff and interfere with increasing the risk of direct surface runoff. Researchers found 28.57% of the total basins in the study area have high-risk basin overall score values, which are basins 6, 7, 13, and 14. It is recommended to estimate the rainfall depth during different return periods, analyze soil permeability and land use classification in the study area, and apply hydrological modeling of drainage basins, which contributes to estimating the volume and peak of direct surface runoff in such arid and semi-arid environments that do not contain hydrometric stations to monitor the runoff. .

Nowadays people express their opinions on social media. Also provides product reviews on eCommerce websites and responds to various news as comments. It is necessary to know the polarity and aspect of various posts and comments for business, education and security. Aspect-based sentiment analysis (ABSA) predicts text category and polarity. In this paper, we proposed a deep learning framework Deep-ABSA for aspect-based sentiment analysis from Bangla texts. Our proposed framework is a multi-channel architecture. We implemented the word embedding, Bi-LSTM with the attention mechanism for one channel. And for another channel, we adopted the character-embedded convolutional neural network. Finally, we concatenated both channels for adjoining the features of each channel. We obtained an adequate performance from our proposed framework for aspect term analysis from Bangla sentences.

We compared the performance of matrix-assisted laser desorption/ionization followed by a time of flight (MALDI-TOF) mass spectrometry and genomic DNA extraction followed by sequencing, assembly, and alignment for phylogenetic assessment (Genomics method). We collected the samples from four contaminated rivers in the Dominican Republic and analyzed MALDI-TOF efficacy and accuracy for identifying bacteria in the samples. We evaluated the results for both methods (MALDI-TOF and Genomics) and reported a similarity percentage between each method's results. The MALDI-TOF method had a 72.41\% of coincidence with the Genomics method. This could have been sequence contamination found in the Genomics method. When it was later filtered, the result's coincidence rate went up to 90\%.

Nickel superalloys occupy a reasonably broad niche in the industry. One of this group's most common and well-known alloys is Inconel 718. Parts from Inconel 718 are used in aerospace, energy, automotive, and some other vital industries, which creates a demand for research and improvement of the machining conditions of this alloy. This article is devoted to the systematization and generalization of the accumulated experience of machining of Inconel 718 at turning operation. The research methodology is based on the Pareto distribution. In the study, more than 50 articles devoted to turning Inconel 718 were analyzed. The tool materials, methods, and types of coating used in turning Inconel 718 were analyzed. Finite element method modeling of processing processes has been considered. The trends in the selection of cutting parameters and the geometry of the cutting tool and finite element method modeling of processing processes have been considered. Lacuna for promising future research was formulated.

This study aims to provide a comprehensive analysis of the More Light for Amazon (MLA) program, examining the roles played by each stakeholder involved in the concession process and identifying the limitations faced for program success. The research employs a content analysis methodology, analyzing a variety of documents, including the Program Operational Manual, Commitment Terms, news articles, and concessionaires' notes. The findings reveal the crucial role of the government as an inducer of actions, establishing objectives and guiding norms for the private sector. Conversely, concessionaires assume the role of program implementers but encounter specific limitations in remote locations, challenging the provision and maintenance of the electrical system in beneficiary communities. The implementation of microgrid systems through concessions enhances coordination and integration between generation and distribution services, allowing for increased government control and ensuring transparency, efficiency, and program effectiveness. These identified elements represent significant challenges for the implementation of public policies in remote regions of the Amazon. Overcoming these challenges take coordinated and strategic actions involving both the government and concessionaires to ensure the complete fulfillment of energy needs in MLA program beneficiary communities.

: Glaucoma is the most common cause of blindness, which significantly reduces quality of life. Most glaucoma cases are primary glaucoma; nevertheless, many patients suffer from glaucoma caused by drugs, such as corticosteroids. A comprehensive review of the risks associated with corticosteroid-induced glaucoma is limited. Therefore, we used the Japanese Adverse Drug Event Reporting Database (JADER) published by the Pharmaceuticals and Medical Devices Agency (PMDA) to analyze the risk factors associated with glaucoma and the trends and characteristics of corticosteroid-induced glaucoma. We did not find sex or age differences associated with the onset of glaucoma. Hierarchical clustering and principal component analysis revealed that triamcinolone acetonide and betamethasone sodium phosphate, which are used around the eyes in Japan, are more likely to induce intraocular pressure (IOP) elevation compared with other corticosteroids. Increased IOP is a direct cause of glaucoma. Based on these findings, it may be necessary to limit or avoid the use of these corticosteroids.

In order to understand the genetic diversity of germplasm resources of kumquat in Guangxi, 14 kumquat germplasm resources in Guangxi and 12 accessions from other provinces were analyzed by using SRAP markers. In total, 19 primer pairs with high stability, good reproducibility, and high polymorphism were chosen for analysis of all the 26 kumquat genotypes. Among the 101 amplified bands, 87 (86.14%) were polymorphic. SRAP markers were analyzed by employing Principal Coordinate Analysis, Population Structure Analysis and Hierarchical Cluster Analysis (UPGMA). The classification results showed that 26 kumquat germplasm could be divided into 5 groups, including cultivated kumquat, intergeneric hybrid, wild kumquat from other provinces, wild kumquat from Guangxi and hybrid kumquat from Guangxi. Guangxi kumquat germplasm occurred high genetic diversity, which were clearly divided into 3 groups like cultivated kumquat, wild kumquat and kumquat hybrid. And the 8 cultivated kumquat varieties in Guangxi were further divided into two subgroups. Wild kumquat in Guangxi and wild kumquat in other provinces belong to different groups, meanwhile the hybrids of Guangxi kumquat form independent groups, thus indicated that Guangxi wild kumquat and kumquat hybrid possessed certain specificity, or they maybe belonged to different species. Among the tested 26 kumquat accessions, 23 unique genotype-specific SRAP markers were detected for 14 kumquat genotypes, which made it possible to surely identify them. For the remaining 12 accessions without genotype-specific markers, they were distinguished by various combinations of markers. These results may have certain importance for kumquat genetic research and cultivar selection.

Plants have a natural protective process of altering their genetic molecules in response to changing environments. To uncover the genetic potential of plants, it is crucial to understand how they adapt to adverse conditions by analyzing their genetic molecules. In the study, we focused on understanding the responsive genes of tomatoes under drought conditions. We analyzed RNASeq data from different Tomato genotypes, tissue types, and different drought durations. We used a time series scale to identify early and late drought-responsive gene modules and applied a machine learning method to identify the best responsive genes. We found six candidate genes of Tomato (ASCT, FLA2, BAG5, DCL2b, NFP7.3, and ADC1) that were responsive to drought. We further constructed their protein-protein interaction network to identify their potential interactors and found them drought responsive proteins. The candidate genes can help to explore the adaptation of tomato plants under drought conditions. The identification of these candidate genes and modules can have far-reaching implications for molecular breeding and genome editing in Tomato, providing insights into the molecular mechanisms that underlie drought adaptation. This research underscores the importance of the genetic basis of plant adaptation, particularly in changing climates and growing populations.

Variable Angle Tow (VAT) laminates offer a promising alternative to classical straight fiber composites in terms of design and performance. However, analyzing these structures can be more complex due to the introduction of new design variables. Carrera's Unified Formulation (CUF) has been successful in previous works for buckling, vibrational, and stress analysis of VAT plates. Typically, one-dimensional (1D) and two-dimensional (2D) CUF models are used, with a linear law describing the fiber orientation variation in the main plane of the structure. The objective of this article is to expand the CUF 2D plate finite elements family to perform free vibration analysis of composite laminated plate structures with curvilinear fibers. The primary contribution is the application of Reissner's Mixed Variational Theorem (RMVT) to a CUF finite element model. The Principle of Virtual Displacements (PVD) and RMVT are both used as variational statements for the study of monolayer and multilayer VAT plates dynamic behavior. The proposed approach is compared to Abaqus three-dimensional (3D) reference solutions, classical theories and literature results to investigate the effectiveness of the developed models. Results demonstrate that mixed theories provide the best approximation of the reference solution in all cases.

Boron (B) toxicity is an important stress that negatively affects maize yield and quality production. The excessive B content in agricultural lands is a growing problem due to the increase in arid and semi-arid areas because of climate change. Recently, two Peruvian maize landraces, Sama and Pachía, were physiologically characterized based on their tolerance to B toxicity, the former being more tolerant to B excess than Pachía. However, many aspects regarding the molecular mechanisms of these two maize landraces against B toxicity are still unknown. In this study, a leaf proteomic analysis of Sama and Pachía was performed. Out of a total of 2793 proteins identified only 303 proteins were differentially accumulated. Functional analysis indicated that many of these proteins are involved in transcription and translation processes, amino acids metabolism, photosynthesis, carbohydrate metabolism, protein degradation, and protein stabilization and folding. Compared to Sama, Pachía had a higher number of differentially expressed proteins related to protein degradation, and transcription and translation processes under B toxicity conditions, which might reflect the greater protein damage caused by B toxicity in Pachía. Our results suggest that higher tolerance to B toxicity of Sama can be attributed to more stable photosynthesis that would avoid damage caused by stromal over-reduction under this stress condition.

In today's business world, many companies have realized that consumer feedback evaluations play a crucial part in shaping the company's future activities. The hotel and tourism industries are well-known examples where the user feedback has become crucial. Even though most accommodations want their clients to express their opinions about their services, these reviews are nevertheless carefully reviewed by them. This manual approach is time demanding and error prone, the level of expertise of the individual analyzing the evaluations determines the quality of the manual analysis. This research focuses on the development of a tool-based support system that analyzes text-based customer evaluations and then highlights the maintenance issues identified in the reviews, removing the need to manually evaluate and analyze the customer reviews. The process includes data preparation, sentiment analysis, and a fully trained deep learning model to extract critical insights. Using sentiment analysis techniques after data preprocessing and trained deep learning model, an accuracy of 96% was achieved, and this paper discusses how this technology helps to meet the needs of accommodation management by completing activities efficiently. This might save management time and helps to save money without losing clients, allowing them to enhance their additional sales.

The biodiversity loss in urban areas has attracted public concern, which is one of the urgent global environmental issues. This study used bibliometric methods to analyze 3351 publications from 1995-2021 that retrieved from the Web of Science and visually represented the state-of-the-art of researches in city biodiversity field. The prolific authors, journals(sources), institutions, and countries are clearly identified. The most cited and influential paper proposed a conceptual framework of associations between urban green space, and ecosystem and human health, and then concluded that green infrastructure could physically and psychologically benefits people by ecosystem services it provides, and make a better socio-economic benefit. The theme hotspots are urbanization, urban ecology, ecosystem services, urban planning, green infrastructure, urban forest and urban park et al. Ingo Kowarik is the most productive author in terms of number of publications. Michael L. McKinney is the most cited authors by the publications in analyzed corpus, who identified how urbanization harms native ecosystems, however, a well ecologically educated population could greatly enhance species richness in all ecosystems. Urban park, garden, fragmented green spaces and green corridor networks could help enhance city biodiversity. In general, the city biodiversity research presents a trend that involves intensive global cooperation, and become more comprehensive.

Emerging soft actuators with various soft materials and traveling-wave motion have been frequently discussed. Various configurations and the resulting performances have been proposed, and it is very challenging for soft actuators in realizing large strokes. This study presents an experimentally validated nonlinear finite element model to predict the deformation produced by a spiral pneumatic rubber actuator to generate traveling-wave motion. The actuator consists of a membrane mounted on a rubber substrate with three air chambers in a spiral configuration, simplifying the actuator's structure. The sequential deformations of the successive chambers interact with each other and produce radial traveling-waves on the membrane surface, driving the objects placed on the actuator. Finite element analysis using ANSYS computer software analyzed the elastic movement by considering the influence of different initial structural types. The structure with three different length ratios was introduced using the four parameters: membrane thickness, chamber width, chamber depth, and wall thickness. The simulation results indicated an optimal structure with specific ratios. A reasonable correlation was obtained during experimental validation; the predicted displacement values were approximately 17% smaller than the experimental values. Finally, the transportation performance of the prototype was tested and a velocity of 2.28 mm/s in the desired direction was achieved. We expect that our demonstration will expand the range of applications of the spiral pneumatic rubber actuator to include conveying or worm-like robots.

With the widespread application of Voltage Source Converter (VSC) in the power system with high penetration of renewable resources, the problem of wideband oscillations caused by the interaction between the power converters and the power grid has drawn large attention. This paper presents a new methodology for simplifying the mathematical derivations of the impedance model of VSC. Using the new simplified model, the stability and the spectrum characteristic of the performance of the VSC can be clearly analyzed. The proposed second-order d-q impedance model of the grid connected VSC at presence of PLL, not only mathematically proves that the wideband oscillatory modes always occurs in conjugate pairs, but also deliver a clear vision of the physical essence of the wideband oscillations. The classic modal analysis is executed in the paper to demonstrate the stability and frequency spectral characteristics of the wideband oscillations in the VSC integrated system. The impact of control parameters of the VSC on the wideband oscillatory stability is thouroughly analyzed using the results of the modal analysis. The methodology can be considered a powerful tool for the control design of VSC in the modern power system.

In Latvia, livestock depredation by wolves has increased during the last two decades. Most attacks had occurred in summer and autumn within wolf hunting season. Cumulative numbers of wolf attacks and number of affected sheep per year at regional forest management units were analyzed in relation to estimated wolf density, extent of culling and proportion of juveniles, as well as sheep density and estimated number of wild prey. The response variables (cumulative number of attacks and cumulative number of affected sheep) were modelled by a negative binomial regression, testing effects of every covariate separately and building models from the significant covariates. Depredation level was related to sheep density and estimated wolf population size. No reducing effect was found for culling, and even greater depredation rate was expected at higher proportions of culled wolves. Estimated number of wild prey or proportion of juvenile wolves had an insignificant effect. However, greater numbers of affected sheep were expected at higher red deer density, suggesting increased opportunistic livestock depredation when the red deer may locally outcompete the preferred wolf prey – roe deer.

The COVID-19 pandemic has profoundly changed the world and human society in various ways. Infection-related figures are key indicators of the direct impact of the pandemic. In addition to the virus, many vulnerable populations (e.g. patients with complex health conditions) have suffered direct or indirect health impacts, such as delayed treatment or diagnosis of cancer and severe mental illness due to stay-at-home restrictions, or financial issues. Studying these kinds of impacts can provide the community with insights and understanding of how the pandemic has affected patients with health conditions and help inform decision-makers design policies that support various vulnerable populations. This paper surveys analytical work conducted on how COVID-19 has impacted patients with complex health conditions. We categorise vulnerable populations into three specific cohorts: patients with chronic disease, patients with cancer and patients with end-of-life care. We then investigate how each of these cohorts has been impacted by the pandemic. We also identify each cohort from an analytics perspective by leveraging various data collection strategies and analytical methods. The goals of this paper are to provide evidence on how to improve the quality of life for vulnerable populations and to inform a national response strategy for future pandemics, which seems inevitable in a highly globalised economy.

Peptides are promising drug development frameworks thanks to their high target selectivity, tolerability and relatively low production cost. However, despite the fact that several thousand potentially therapeutic peptides reported, only sixty have arrived at the market. This concerning low proportion is partially explained by undesired properties such as peptide-induced hemolytic activity. Hence, we aim to get a better insight into the chemical space of hemolytic peptides using a novel approach based on network science and interactive data mining as an alternative to design more effective peptide drugs with low hemolytic activity. Metadata networks (METNs) were used to characterize and find general patterns associated to hemolytic peptides, whereas Half-Space Proximal Networks (HSPNs), created using five different two-way dissimilarity measures, represented the hemolytic peptide space. Then, using the best candidate HSPNs, we extracted various scaffolds that capture information of almost all the chemical space but avoiding peptide overrepresentation. Such scaffolds can have many applications, such as training accurate ML-based prediction models, constructing one-class multi-query similarity searching models and characterizing the diversity of hemolytic peptides using a manageable set of peptides. Finally, by means of an alignment-free approach, we reported 47 putative hemolytic motifs, which might provide hints about the mechanisms of hemolysis and can also be used as toxic signatures when developing novel peptide-based drugs.

Efficient natural resource management prevents and reduces negative impacts, such as environmental damage, misappropriation of resources, and conflicts; several strategies can be leveraged to conserve, protect, and enhance natural resources. Multi-criteria decision analysis (MCDA) is useful in providing solutions to addressing decision-choice problems. In this study, the natural resource under evaluation is the chestnut forest, with the objective of valorising its supply chains. The methodology applied is A'WOT, which allows previously identified factors through a qualitative SWOT matrix, to be ordered through an objective quantification using AHP (Analytic Hierarchy Process), which is a multicriteria decision-support method. The survey was conducted with a group of chestnut resource (n=20) experts. The SWOT matrix identified a total of 20 factors: 6 strengths and 6 weaknesses and 4 factors each for opportunities and threats. The results express a clear stakeholder interest, which identifies the significant role of civil society in directing management choices for the provision and enhancement of ecosystem and vocational services. This study evaluated the adaptability of decision-support tools applied to a real case of forest resource management to identify and order factors useful to enhance the resource and stimulate the supply chains to achieve greater added value. In a general sense, the methodological potential emerged to replicate or improve the research in other geographical regions, whether regional or extra-regional, or even on a larger scale, such as on a national level.

There is great current interest in systems represented by non-Hermitian Hamiltonians, including a wide variety of real systems that may be dissipative and whose behaviour can be represented by a "phase" parameter that characterises the way "exceptional points" (singularities of various sorts) determine the system. These systems are briefly reviewed with an emphasis on their geometrical thermodynamics properties.

This study aims to determine the role of Industry 4.0 sensors in digital transformation. Using a systematic literature review with a bibliometric analysis, we examine a sample of 52 studies from the SCOPUS database to identify research activity on this topic until December 2022. We find that 2022 was the year with the highest number of peer-reviewed documents on the subject, with 18 publications. We also examine current themes and find that sensors can connect multiple systems and devices, thus enabling machine-to-machine communication and facilitating great precision during product designing, development, and production, thus enabling customization and improving quality. However, despite these benefits, the current sensor technologies face multiple challenges that undermine their maximum adoption.

Ferrocene and its derivatives have ecologically effective antidetane properties. In this regard, ferrocene reacts with cyclic ketones and ferrosenylcarbinols are synthesized. It should be noted that ferrocene enters into electrophilic reactions and the process takes place in an acidic environment. In addition, the yield of the new product was small compared to the reactions of ferrocene with non-cyclic ketones. This is due to the spatial structures of molecules. The elemental analysis of obtained compounds was carried out; the structures were researched by cyclic voltammograms and Chronoamperometric.

There is great current interest in systems represented by non-Hermitian Hamiltonians, including a wide variety of real systems that may be dissipative and whose behaviour can be represented by a "phase" parameter that characterises the way "exceptional points" (singularities of various sorts) determine the system. These systems are briefly reviewed with an emphasis on their geometrical thermodynamics properties.

BACKGROUND: The National Lung Screening Trial (ILST) and the NELSON study showed that lung cancer-specific mortality can be reduced by 20-24% using low-dose computed tomography (LDCT) screening in high-risk populations, due to an increase in early-stage diagnoses. RESEARCH QUESTION: How much lung cancer-related direct costs may be reduced using a LDCT screening programme based on the ILST protocol in a public healthcare system?STUDY DESIGN AND METHODS: Cost analysis of lung cancer screening (LCS) vs. usual care in the framework of the retail price of the Catalan public healthcare system. The LCS group included costs of screening (ILST protocol), treatment cost according to weighted average distribution of TNM staging in the NLST and NELSON trials, lung cancer detection rate (CDR) and smoking cessation intervention. The usual care group included treatment costs based on distribution of TNM staging registered in the Spanish index hospital. RESULTS: In the usual care group, treatment costs were €91,959. In the 5-year duration of the LCS programme, the average expected costs per subject were €1,342 (range €1,054-1,832 depending on malignancy in detected nodules) for screening and €32,431 for treatment, with an expected reduction of €952 based on an average CDR of 1.6%. The decrease in cost resulting from stage shift offsets 70.6% of the costs of the screening programme. INTERPRETATION: Baseline 5-year LCS costs are low according to the ILST protocol. In the Catalan public healthcare system, the expense reduction from the stage shift due to the LCS programme compensates a substantial part of its costs.

In recent years, with the development of social media, people are more and more inclined to upload text, pictures and videos on the platform to express their personal emotions, thus the number of short videos is increasing and becoming the first choice for people to socialize. Unlike the traditional way, people can convey their personal emotions and opinions through media other than words, such as video images, etc. for external information. Therefore, the expression and analysis of emotions is not only through text, but also through the analysis of emotional needs in images and videos, and the research scholars have customized products for individual users. Compared with pure text content, video information can more intuitively express users' happiness, anger and sorrow, thus short video-related applications have gained more and more popularity among Internet users in recent years. However, not all short videos on social networking sites can accurately express users' emotions, and related text information can more accurately assist sentiment analysis and thus improve accuracy. However, short video sentiment analysis based on video frame images is inaccurate in some scenarios, such as when expressing tears of joy, the sentiment expressed by the user's facial expression and voice are different, which will cause errors in the analysis of sentiment. As a result, researchers began to consider multimodal sentiment analysis to reduce the impact of the above scenarios on short video sentiment analysis. This paper focuses on proposing a sentiment analysis method for short videos. We first propose a residual attention model to make full use of the information in audio to classify the emotions contained in them. Then the text information in the dataset is classified by feature extraction. The key to extract features from text information is not only to retain the semantic information of the text, but also to explore the potential emotional information in the text, so as to ensure the integrity of the text information features. The experiments show that the sentiment analysis model proposed in this paper is more superior than the baselines.

Blockchain technology has been gaining great interest from a variety of sectors including healthcare, supply chain, and cryptocurrencies. However, Blockchain suffers from its limited ability to scale (i.e. low throughput and high latency). Several solutions have been proposed to tackle this. In particular, sharding proved that it is one of the most promising solutions to Blockchain’s scalability issue. Sharding can be divided into two major categories: (1) Sharding-based Proof-of-Work (PoW) Blockchain protocols, and (2) Sharding-based Proof-of-Stake (PoS) Blockchain protocols. The two categories achieve good performances (i.e. good throughput with a reasonable latency), but raise security issues. This article focuses on the second category. In this paper, we start by introducing the key components of sharding-based PoS Blockchain protocols. Then, we briefly introduce two consensus mechanisms, namely PoS and practical Byzantine Fault Tolerance (pBFT), and discuss their use and limitations in the context of sharding-based Blockchain protocols. Next, we provide a probabilistic model to analyze the security of these protocols. More specifically, we compute the probability of committing a faulty block and measure the security by computing the number of years to fail. Finally, we evaluate the effectiveness of the proposed model via numerical analysis.

Gwadar is essential for Pakistan's financial stability. The third deep-water port in Pakistan, Gwadar, plays a significant part in trade between the Gulf countries, Africa, China, United Arab Emirates, and Cordillera Administrative Region. However, the load Shedding of 12-16 hours in Gwadar is the most concerning issue. Pakistan imports 70 MW of electricity from Iran. The wind and solar system are already installed but for a limited residential area. In Gwadar, there are enough renewable energy resources that can be utilized for electricity generation. In this context, a Techno and Economic Analysis is performed using the Hybrid Optimization Model for Multiple Energy Resources (HOMER) Pro. Two models are considered for this study. Model-1 includes PV/Wind Turbine/ and Battery while Model-2 consists of PV/Wind Turbine/Converter and Grid. The yearly energy generated by Model-1 and Model-2 is 57.37 GWh and 81.5 GWh, respectively. The levelized cost of electricity (LCOE) for Model-1 and Model-2 is respectively $0.401/kWh and $0.0347/kWh. It is shown that the simple payback of Model-1 is of 6.70 years, and the simple payback of Model-2 is 7.77 years. Due to the high LCOE of Model-1, its payback year is lesser than model-2. All of these facts indicate that Model 2 is the most optimal solution.

Our research team compared the performance of matrix-assisted laser desorption/ionization followed by a time of flight (MALDI-TOF) mass spectrometry and genomic DNA extraction followed by sequencing, assembly and alignment for phylogenetic assessment. We performed these comparisons to determine our methodology’s overall efficacy and accuracy for environmental bacteria. In addition, we collected samples from various contaminated rivers in the Dominican Republic. For both methods, we analyzed these results and reported the main differences between each method.

Steam Generator Level Control System (SGLCS) is one of the key instrumentations and control subsystems to ensure the safe operation of nuclear power plants. It is highly recommended to perform reliability analysis for SGLCS for making better maintenance strategy. SGLCS is a digital control system with complex redundant configuration and failure\self-diagnosis\repair action, traditional fault tree is not applicable due to its static property, Markov model is not a good choice too because of heavy burden of creating state transition graph for even medium-size system. Boolean Logic Driven Markov Process (BDMP) can describe complex failure-repair state transition via ‘trigger link’ and three kinds of leaf nodes, as well as keep compact and easy-read struct like fault tree. So BDMP is adopted to analysis reliability of SGLCS. Graphical BDMP modeling environment KB3 and Monte Carlo simulator YAMS is used for BDMP modeling and quantitative analysis respectively, and unavailability of SGLCS is obtained. The contribution of three parts of SGLCS to the unavailability of the system is also evaluated, and it is found that the water supply flow control part contributes the most to the failure of SGLCS.

Municipal solid waste management is a growing worldwide challenge. Landfill mining is a promising technique to reduce MSW landfills. In the present study, arbitrary embankments made of different MSW fractions are analyzed to find the safety factor of their slopes. Properties of Municipal solid waste fines (MSWF), Shredded MSW, MSW Incineration Ash, and MSW having particles less than 35 mm are used in the analysis. For doing the same, finite element-based application 'Plaxis-2D' is used. The safety of slopes is assessed while the water table is inserted, and a uniform load is applied to the embankment to establish how well they will perform in critical situations. It was found that the slope made of shredded MSW is most safe due to its low density and high friction angle, while the least safe slope is made of MSW having less than 35 mm fractions.

The interaction between oceanographic, meteorological, and hydrological factors can result in an extreme flooding scenario in the low-lying coastal area, called compound flooding (CF) events. For instance, rainfall and storm surge (or high river discharge) can be driven by the same meteorological, tropical or extra-tropical cyclones, resulting in a CF phenomenon. The trivariate distributional framework can significantly explain compound events' statistical behaviour reducing the associated high-impact flood risk. Resolving heterogenous dependency of the multidimensional CF events by incorporating traditional 3-D symmetric or fully nested Archimedean copula is quite complex. The main challenge is to preserve all lower-level dependencies. An approach based on decomposing the full multivariate density into simple local building blocks via conditional independence called vine or pair-copulas is a much more comprehensive way of approximating the trivariate flood dependence structure. In this study, a parametric vine copula of a drawable (D-vine) structure is introduced in the trivariate modelling of flooding events with 46 years of observations of the west Coast of Canada. This trivariate framework searches dependency by combining the joint impact of annual maximum 24-hr rainfall and the highest storm surge and river discharge observed within the time ±1 day of the highest rainfall event. The D-vine structures are constructed in three alternative ways by permutation of the conditioning variables. The most appropriate D-vine structure is selected using the fitness test statistics and estimating trivariate joint and conditional joint return periods. The investigation confirms that the D-vine copula can effectively define the compound phenomenon's dependency. The failure probability (FP) method is also adopted in assessing the trivariate hydrologic risk. It is observed that hydrologic events defined in the trivariate case produce higher FP than in the bivariate (or univariate) case. It is also concluded that hydrologic risk increases (i) with an increase in the service design life of the hydraulic facilities and (ii) with a decrease in return periods.

The occurrence and intensity of the detonation phenomenon at spark-ignition (SI) engine conditions is investigated, with the objective to successfully predict super-knock and to elucidate the effect of kinetics and transport at the ignition front. The computational singular perturbation (CSP) framework is employed in order to investigate the chemical and transport mechanisms of deflagration and detonation cases in the context of 2D high-fidelity numerical simulations. The analysis revealed that the detonation development is characterized by: (i) stronger explosive dynamics and (ii) enhanced role of convection. The role of chemistry was also found to be pivotal to the detonation development which explained the stronger explosive character of the system, the latter being an indication of the system's reactivity. The role of convection was found to be enhanced at the edge of the detonating front, thereby suggesting that it is the result and not the cause of the detonation onset. Moreover, the increased contribution of convection was found to be related mainly to heat convection. Remarkably, the detonation front was mainly characterized by dissipative and not explosive dynamics. Finally, diffusion was found to have negligible role to both examined cases.

Enabling D2D communication in the mm-Wave band has many obstacles which must be mitigated. The primary concern is the introduction of interference from various sources. Thus, we focused our work on the performance of decode and forward (DF) relay assisted D2D communication in the mm-Wave band for increasing the coverage probability and energy efficiency (EE). Three modes are proposed for D2D communication to prevail. Bit-wise binary XOR operation is executed at the relay node which increases the security feature. Radius of coverage expression is derived which indicates the switching of the modes. The diffused incoherent scattering power is also considered as a part of power consumption. Furthermore, a unique relay selection scheme, Dynamic relay selection (DRS) method is proposed to select the optimal relay for information exchange. Comparison of the proposed DF relay scheme with amplify and forward (DF) scheme is also shown. Finally, simulation results prove the efficacy of the proposed work.

This paper focuses on the application of principal component analysis (PCA) to conduct a source apportionment of atmospheric aerosols from 8 sampling locations along the Marilao-Meycauayan-Obando River System (MMORS). Aerosols were collected on May 2016 during the same time that water samples were collected. Elemental analysis was conducted using a scanning electron microscope coupled with energy dispersive x-ray (SEM-EDX). Carbon (C), nitrogen (N), oxygen (O), sodium (Na), magnesium (Mg), aluminum (Al), silicon (Si), sulfur (S), chlorine (Cl), potassium (K), calcium (Ca), titanium (Ti), manganese (Mn), iron (Fe), copper (Cu), zinc (Zn), bromine (Br), niobium (Nb), barium (Ba), mercury (Hg), and lead (Pb) concentrations were measured and used as inputs in Principal Component Analysis (PCA). The aerosol samples showed the presence of heavy metals Pb and Hg, elements that were also detected in trace amounts in the water measurements. Concentrations of heavy metals Fe, Pb, Hg in the aerosols were attributed to industrial sources. However, it was determined that the primary source of aerosols in the area were traffic and crustal emissions (C, N, O, Si, Al, Ca). Thus, control of traffic emissions would be more beneficial in reducing aerosol emissions in Meycauayan.

This paper presents an approach to the two-dimensional analysis of elastic isotropic deep beams using the finite difference method (FDM). Deep beams are subjected to in-plane loading and present a shear span to height ratio of less than 2.50; consequently, Euler-Bernoulli beam theory and Timoshenko beam theory do not apply. Deep beams analysis is generally conducted using numerical methods such as the finite element method and to a lesser extent the FDM; the strut-and-tie model and the stress field method are also widely utilized. Analytical approaches usually make use of the Airy stress function, where stresses are formulated in terms of the stress function; however, the exact solution of this function satisfying all of the boundary conditions can hardly be found, even for simple cases. In this paper, deep beams were analyzed using the FDM. The FDM is an approximate method for solving problems described with differential equations. The FDM does not involve solving differential equations; equations are formulated with values at selected nodes of the structure. Therefore, the deep beam was discretized with a two-dimensional grid, and additional nodes were introduced at the boundaries and at positions of discontinuity (openings, brutal change of material properties, non-uniform grid spacing), the number of additional nodes corresponding to the number of boundary conditions at the node of interest. The introduction of additional nodes allowed us to apply the governing equations at boundary nodes and satisfy the boundary and continuity conditions. An Airy stress function approach and a displacement potential function approach were considered in this study whereby strong formulations of equations (equilibrium, kinematic, and constitutive) were set. Stress and stability analyses were carried out with this model; furthermore, deep beams of varying stiffness, layered beams, and beams having openings were analyzed. For slender beams, the results obtained with the Airy stress function approach showed good agreement with those of the Euler-Bernoulli beam theory, and for deep beams, the shapes of stress distributions were in good agreement with a proper understanding of the behavior of structures. On the other hand, the displacement potential function approach delivered unsatisfactory results, probably due to the use of an inefficient equation solver; a more powerful tool will be needed in future research for this purpose.

Abstract: The calibrator is one of the most important factors in the calibration of various laser 3D scanning instruments. The requirements for diffuse reflection surface are specially emphasized in many national standards. In this study, the spherical calibrator and plane calibrator compara-tive measurement experiments were carried out. The black ceramic standard sphere, white ce-ramic standard sphere, metal standard sphere, metal standard plane and white ceramic standard plane were used to test the laser 3D scanner. In the spherical calibrators comparative measure-ment experiments, the results indicated that the RMS of the white ceramic spherical calibrator with reflectance about 60% is 10 times that of the metal spherical calibrator with the reflectance of about 15%, and the RMS of the black ceramic spherical calibrator with reflectance of about 11% is of the same order as the metal spherical calibrator. In the plane calibrators comparative measurement experiments, the RMS of flatness measurement is 0.077 mm for metal plane cali-brator with reflectance of 15%, and 2.915 mm for ceramic plane calibrator with reflectance of 60%. The results show that when the optimal measurement distance and incident angle are selected, the reflectance of the calibrator has a great effect on the measurement results, regardless of the outlines or profiles. Based on the experiments, it is recommended to use the spherical calibrator or the standard plane with reflectance of around 18% as the standard, which can obtain the rea-sonable results. In addition, it is necessary to clearly provide the material category and surface reflectance information of the standard when calibrating the scanner according to the measure-ment standard.

Magnesium-silver alloys are of high interest for the use as temporary bone implants due to their antibacterial properties in addition to biocompatibility and biodegradability. Thin wires in particular can be used for scaffolding, but the determination of their degradation rate and homogeneity using traditional methods is difficult. Therefore, we have employed 3D imaging using X-ray near-field holotomography with sub-micrometer resolution to study the degradation of thin (250 μm diameter) Mg-2Ag and Mg-6Ag wires. The wires were studied in two states, recrystallized and solution annealed to assess the influence of Ag content and precipitates on the degradation. Imaging was employed after degradation in Dulbecco’s modified Eagle’s medium and 10% fetal bovine serum after 1 to 7 days. At 3 days of immersion the degradation rates of both alloys in both states were similar, but at 7 days higher silver content and solution annealing lead to decreased degradation rates. The opposite was observed for the pitting factor. Overall, the standard deviation of the determined parameters was high, owing to the relatively small field of view during imaging and high degradation inhomogeneity of the samples. Nevertheless, Mg-6Ag in the solution annealed state emerges as a potential material for thin wire manufacturing for implants.

An increasing amount of evidence indicates the critical role of the cutaneous nervous system in the initiation and maintenance of psoriatic skin lesions by neurogenic inflammation. However, molecular mechanisms affecting cutaneous neurons are largely uncharacterized. Therefore, we reanalyzed a psoriatic RNA sequencing dataset from published transcriptome experiments of nearly 300 individuals. Using the Ingenuity Pathway Analysis software, we associated several hundreds of differentially expressed transcripts (DETs) to nervous system development and functions. Since neuronal projections were previously reported to be affected in psoriasis, we performed an in-depth analysis of neurite formation-related processed. Our in silico analysis suggests that SEMA-PLXN and ROBO-DCC-UNC5 regulating axonal growth and repulsion are differentially affected in non-lesional and lesional skin samples. We identified opposing expressional alterations in secreted ligands for axonal guidance signaling (RTN4/NOGOA, NTNs, SEMAs, SLITs) and non-conventional axon guidance regulating ligands, including WNT5A and their receptors, modulating axon formation. These differences in neuritogenesis may explain the abnormal cutaneous nerve filament formation described in psoriatic skin. The processes also influence T cell activation and infiltration, thus highlighting an additional angle of the crosstalk between the cutaneous nervous system and the immune responses in psoriasis pathogenesis, in addition to the known neurogenic pro-inflammatory mediators.

Introduction: There are unique technical and management challenges associated with living donor liver transplantation (LDLT) for Budd-Chiari Syndrome (BCS). The outcomes of LDLT for BCS in comparison to other indications remains unclear and warrants elucidation. Methods: Data of 24 BCS patients who underwent LDLT between January 2012 and June 2019 were analyzed. There were 20 adults and 4 children. The early and long-term outcomes of adult LDLT BCS patients were compared to a control group of LDLT patients for other indications and matched using propensity scoring methodology. Results: Primary BCS was observed in 22(91.7%) patients. Caval replacement was performed in 7(29.1%) patients. Early and late hepatic venous outflow tract (HVOT) complications were seen in 1(5.5%) and 3(16.7%) patients. Preoperative acute kidney injury was identified as a risk factor for mortality in the BCS cohort (p =0.013). On comparison, BCS recipients were younger with fewer comorbidities, more large volume ascites and higher rates of PVT. They also had longer cold ischemia time, increased blood loss and transfusion requirements, increased hospital stay, and higher late outflow complications. The 1-year and 3-year survivals were similar to non-BCS cohort (84.2% vs 94% and 70% vs 91.9%, respectively, log rank test p=0.09). Conclusion: LDLT is remains a good option for symptomatic BCS who have failed non-transplant interventions. The clinical and risk factor profile of BCS recipients is distinct from non-BCS recipients. By following an algorithmic management protocol, we show on propensity-score matched analysis that outcomes of LDLT for BCS are similar to non-BCS indications.

A progressive FEA fatigue degradation model for composites was developed and implemented using a UMAT user material subroutine in Abaqus. Numerical results were compared to experimental strain field data from high frequency Digital Image Correlation (DIC) of split disk fatigue testing of pressure vessel cut outs with holes. The model correctly predicted the onset and evolution of damage in the matrix as well as the onset of fiber failure. The model use progressive failure analysis based on the maximum strain failure criterion, the cycle jump method and Miner sum damage accumulation rule. A parameter study on matrix properties was needed to capture the scatter in strain fields observed experimentally by DIC. S-N curve for the matrix material had to be lowered by 0% to 60% to capture the experimental scatter. The onset of local fiber failure had to be described by local S-N curves measured by DIC having 2.5 times greater strain than that of S-N curves found from standard coupon testing.

Congenital breast asymmetry represents a particular challenge to the classical techniques of plastic surgery due to a young group of patients. This study compares traditional breast augmentation using silicone implants to the more innovative lipograft technique regarding long-term results. To achieve this, we not only captured subjective parameters like satisfaction with outcome and symmetry, but also objective parameters such as breast volume and anthropometric measurements. Objective examination was performed manually and by using the Vectra® H2 photogrammetry scanning system. Patients who underwent implant augmentation and lipograft both showed no significant differences in patient´s satisfaction with surgical outcome (p = 0.55) and symmetry (p = 0.69). Furthermore, a breast symmetry of 93 % in both groups was reported. Likewise, no statistically significant volume difference between left and right breast was observed in both groups (p<0.41). However, on average, lipograft patients needed 1.3 procedures more until the desired result was achieved. In contrast, patients treated with implant-based breast augmentation usually need several implant changes during their life. In conclusion, both methods should be considered for patients with congenital breast asymmetry.

At the plasma membrane, transmembrane receptors are at the interface between cells and their environment. They allow sensing and transduction of chemical and mechanical extracellular signals. The spatial distribution of receptors and the specific recruitment of receptor subunits to the cell membrane is crucial for the regulation of signaling and cell behavior. However, it is challenging to define what regulates such spatial patterns for receptor localization, as cell shapes are extremely diverse when cells are maintained in standard culture conditions. Bone morphogenic protein receptors (BMPRs) are serine-threonine kinases, which build heteromeric complexes of BMPRI and II. These are especially interesting targets for receptor distribution studies, since the signaling pathways triggered by BMPR-complexes depends on their dimerization mode. They might exist as pre-formed complexes, or assemble upon binding of BMP, triggering cell signaling which leads to differentiation or migration. In this work we analyzed BMPR receptor distributions in single cells grown on micropatterns, which allows not only to control cell shape, but also the distribution of intracellular organelles and protein assemblies. We developed a script called ComRed (Center Of Mass Receptor Distribution), which uses center of mass calculations to analyze the shift and spread of receptor distributions according to the different cell shapes. ComRed was tested by simulating changes in experimental data, showing that shift and spread of distributions can be reliably detected. Our ComRed-based analysis of BMPR-complexes indicates that receptor distribution depends on cell polarization. The absence of a coordinated internalization after addition of BMP suggests that a rapid and continual recycling of BMPRs occurs. Receptor complexes formation and localization in cells induced by BMP might yield insights into the local regulation of different signaling pathways.

Doubly Fed Induction Generator (DFIG) has a stator winding directly coupled with grid. Whereas, rotor winding is connected via a fault-prone back to back power converters. DFIG is known to be vulnerable to the grid faults. In early times, when a fault occurred, these generators were required to disconnect from the grid to secure the generator and power converters. However, due to the increased penetration of wind turbines into the power system, grid operators demanded that the wind turbines remain connected to the grid, as disconnecting them would further disrupt the grid. When a fault at the grid terminal occur, a high stator current is induced which further result in high rotor current. This current will trigger the DC-link voltage to rise. This high currents and DC-link voltage will cause harm to the converters. Thus, in this paper work, the crowbar protection system is employed for protecting the converters against excess energy. Furthermore, the analysis of DFIG is rendered by integrating the crowbar protection with the Battery Energy Storage System (BESS) for a much effective outcome in enhancing machine to drive the fault. MATLAB-Simulink software is used for modeling and simulation. All system parameters are obtained from ADAMA-II Wind Farm.

The objective of this article: analysis of research trends on the topic "Materials Science for Energy Engineering" for the period 2012-2021. Materials and methods: bibliometric analysis of data from the Scopus abstract database.Results. It is shown that this topic is developing faster than the general energy topics.The key feature of the research trends is a significant increase in work on the development of materials for renewable energy and a decrease in the number of publications related to nuclear power.The primary goal of many studies is to increase the efficiency of renewable energy production through the use of new materials.The importance of the topic is evidenced by the emergence of new journals that quickly entered the first quartile of the abstract databases Scopus and Web of Science, for example: ACS Applied Energy Materials.There has been a significant increase of interest in perovskite solar cells, layered semiconductors, triboelectric nanogenerators, cobalt compounds, sulfur compounds, and oxygen and hydrogen evolution reaction during Electrolysis.Publications on electric batteries are well represented in all time intervals. The focus is on electrode materials and battery efficiency.

The emergence of an external campus student organization (ormek) is very influential for the progress of the millennial generation, especially among students as the nation's successor. In addition to being a forum for developing self-potential and training student soft skills, ormek is a hope for the surrounding community in solving societal problems. It takes understanding and the role of all millennial generations to think critically about organizations that have various impacts in the cadre process. This research analyzed how intelligent efforts can be made by the millennial generation to respond, sort, and choose and recognize the impact. The method used is a qualitative method through literature review and a quantitative method through a survey (35 respondents). The findings showed that the existence of ormek is very influential by being a forum for the student movement since the era of Indonesian independence in various aspects such as social and political. Students had various opinions about the existence of ormek and its influence on the millennial generation. Brilliant efforts must be made in addressing the existence of ormek so that they are wise in the organization and benefit the people.

In Rwanda, more than 90% of the population is insured for health care. Despite the comprehensiveness of health insurance coverage in Rwanda, some health services at partner institutions are not available, causing insured patients to pay unintended cost. We aimed to analyze the effect of health insurance on health care utilization and factors associated with the use of health care services in Rwanda. This is an analysis of secondary data from the Rwanda integrated living condition survey 2016-2017. The survey gathered data from 14580 households, and decision tree and multilevel logistic regression models were applied. Among 14580 households only (20%) used health services. Heads of households aged between [56-65] years (AOR=1.28, 95% CI:1.02-1.61), aged between [66-75] years (AOR=1.52, 95% CI: 1.193-1.947), aged over 76 years (AOR=1.48, 95% CI:1.137-1.947), households with health insurance (AOR=4.57, 95% CI: 3.97-5.27) displayed a significant increase in the use of health services. This study shows evidence of the effect of health insurance on health care utilization in Rwanda: a significant increase of 4.57 times greater adjusted odds of using health services compared to those not insured. The findings from our research will guide policymakers and provide useful insights within the Rwanda context as well as for other countries that are considering moving towards universal health coverage through similar models.

Artificial Intelligence are creating a paradigm shift in health care, being phenotyping patients through clustering techniques one of the areas of interest. Objective: To develop a predictive model to classify heart failure (HF) patients according to their left ventricular ejection fraction (LVEF), by using available data in Electronic Health Records (EHR). Subjects and methods: 2854 subjects more than 25 years old with diagnose of HF and LVEF measured by echocardiography were selected to develop an algorithm to predict patients with reduced EF using supervised analysis. Performance of the algorithm developed were tested in heart failure patients from Primary Care. To select the most influencing variables, LASSO algorithm setting was used and to tackle the issue of one class exceed the other one by a large proportion we used the Synthetic Minority Oversampling Technique (SMOTE). Finally, Random Forest (RF) and XGBoost models were constructed. Results: Full XGBoost model obtained the maximized accuracy, a high negative predictive value and the highest positive predictive value. Gender, age, unstable angina, atrial fibrillation and acute myocardial infarct are the variables that most influence FE value. Applied in the EHR data set with a total 25594 patients with an ICD-code of HF and no regular follow-up in Cardiology clinics, 6170 (21.1%) were identified as those pertaining to the reduced EF group. Conclusion: The algorithm obtained is able to rescue a number of HF patients with reduced ejection fraction that can be take benefit for a protocol with strong recommendation to succeed. Furthermore, the methodology can be used for studies with data extracted from the Electronic Health Records.

In the present study, we aimed to investigate whether an automated molecular diagnostic method based on PCR-reverse blot hybridization assay can discriminate between human Mycobacterium tuberculosis (MTB)-positive and -negative FFPE tissues and to compare the relative mRNA expression levels of various host immune markers between MTB-infected and uninfected human tissues using quantitative reverse transcription (qRT) PCR. A total of 52 human FFPE tissue samples from various regions of the body, including the lungs, lymph nodes, tendons, colon, and appendix, were collected and used for the molecular identification of Mycobacterium species and analysis of cytokine mRNA expression. As a result, IFN-γ, TNF-α, IP-10, CXCL9, CXCL11, and GM-CSF mRNA expression levels in MTB-infected tissues were significantly higher than those in uninfected samples. Additionally, the differences in the mRNA expression levels of IFN-γ, CXCL9, and GM-CSF between MTB-infected and uninfected tissues were statistically significant were statistically significant (p < 0.05). Correlation curve analysis indicated that the mRNA expression of IFN-γ was inversely proportional to that of IP-10 and that the mRNA expression levels of IFN-γ, TNF-α, CXCL9, CXCL11, GM-CSF, and TNFR were proportional and well-correlated. Furthermore, to establish marker profiles for detecting MTB infection, the statistically significant expression levels of three markers were combined. We confirmed that the combined profile of IFN-γ, CXCL9, and GM-CSF expression levels was statistically significant (P < 0.001). Although the mRNA expression patterns of host immune markers may vary according to MTB infection status, these patterns may be highly correlated and can be simultaneously used as an additional indicator for diagnosing TB.

Various renewable energy sources such as wind power and photovoltaic (PV) have been increasingly integrated into the power system through power electronic converters in recent years. However, power electronic converter-driven stability issues under specific circumstances, for instance, modal resonances might deteriorate the dynamic performance of the power systems or even threaten the overall stability. In this paper, the integration impact of a hybrid renewable energy source (HRES) system on modal interaction and converter-driven stability is investigated in an IEEE 16-machine 68-bus power system. Firstly, an HRES system is introduced, which consists of full converter-based wind power generation (FCWG) and full converter-based photovoltaic generation (FCPV). The equivalent dynamic models of FCWG and FCPV are then established, followed by the linearized state-space modeling. On this basis, converter-driven stability analyses are performed to reveal the modal resonance mechanisms of the interconnected power systems and the modal interaction phenomenon. Additionally, time-domain simulations are conducted to verify effectiveness of dynamic models and support the converter-driven stability analysis results. To avoid detrimental modal resonances, an optimization strategy is further proposed by retuning the controller parameters of the HRES system. The overall results demonstrate the modal interaction effect between external AC power system and the HRES system and its various impacts on converter-driven stability.

With the emerging technology connected with the internet, there is one constant issue related to that is data security. The only solution with which this issue can be resolved at a limit and can be used to protect the data is various algorithms for encryption. Though different approaches were used for the same, Cryptography seems to be efficiently protecting the data while transmitting in network from sender to receiver. Firstly the data is encrypted before sending to receiver using the most secure and reliable encryption algorithm. Secondly, at the receiver end it can be decrypted using the same decryption algorithm. Only receiver will have the key with which the data can be decrypted. In this paper, AES, DSS and RSA algorithms were implemented. These algorithms are encryption algorithms which perform encoding and decoding of data, to be sent from sender to receiver, using the keys. Each have different criteria for encryption and are then compared based on different parameters viz. delay, throughput, PDR is an acronym for packet delivery ratio, PLR represents packet loss ratio and RPC denotes Received Packet Count. The results in the form of graphs are given to analyze the security provided by each algorithm.

Most existing flexible count regression models allow only approximate inference. Balanced discretization is a simple method to produce a mean-parametrizable flexible count distribution starting from a continuous probability distribution. This makes easy the definition of flexible count regression models allowing exact inference under various types of dispersion (equi-, under- and overdispersion). This study describes maximum likelihood (ML) estimation and inference in count regression based on balanced discrete gamma (BDG) distribution and introduces a likelihood ratio based latent equidispersion (LE) test to identify the parsimonious dispersion model for a particular dataset. A series of Monte Carlo experiments were carried out to assess the performance of ML estimates and the LE test in the BDG regression model, as compared to the popular Conway-Maxwell-Poisson model (CMP). The results show that the two evaluated models recover population effects even under misspecification of dispersion related covariates, with coverage rates of asymptotic 95% confidence interval approaching the nominal level as the sample size increases. The BDG regression approach, nevertheless, outperforms CMP regression in very small samples (n = 15 − 30), mostly in overdispersed data. The LE test proves appropriate to detect latent equidispersion, with rejection rates converging to the nominal level as the sample size increases. Two applications on real data are given to illustrate the use of the proposed approach to count regression analysis.

This study aims to analyze the pedigrees of calves affected by one of three congenital defects: aplasia genitalis, atresia ani et recti and hernia cerebralis. The defects were diagnosed by veterinary surgeons in the Czech surveillance program for bovine genetic disorders. The sires fathering affected calves were born in the Czech Republic or imported from 1986-2001. The cases occurred on farms across the Czech Republic. The pedigree of each case was examined for common maternal and paternal ancestors (inbreeding loops) and for ancestors shared by other cases of the defect. The 13 calves affected by aplasia genitalis had common ancestors in all cases. The results indicate hereditary causation with recessive inheritance. Additionally, in atresia ani et recti, some of the pedigrees of 25 affected calves support hereditary causation, and repeating ancestors were found for 11 calves. In contrast, our analysis of 11 hernia cerebralis cases did not confirm the genetic background. We demonstrated that the pedigree analysis of congenital defects could help in controlling genetic health, although the final goal in terms of inherited defects is the description of causal genes and mutations. Measures to control sires that father affected calves should be appropriate under the current knowledge, which include culling or prudent use of breeding with the monitoring of descendants.

To investigate the optimum layouts of small vertical axis wind turbines, a two-dimensional analysis of dynamic fluid body interaction is performed via computational fluid dynamics for a rotor pair in various configurations. The rotational speed of each turbine rotor (diameter: D = 50 mm) varies based on the equation of motion. First, the dependence of rotor performance on the gap distance (gap) between two rotors is investigated. For parallel layouts, counter-down (CD) layouts with blades moving downwind in the gap region yield a higher mean power than counter-up (CU) layouts with blades moving upwind in the gap region. CD layouts with gap/D = 0.5–1.0 yield a maximum average power that is 23% higher than that of an isolated single rotor. Assuming isotropic bidirectional wind speed, co-rotating (CO) layouts with the same rotational direction are superior to the combination of CD and CU layouts regardless of the gap distance. For tandem layouts, the inverse-rotating configuration (IR) shows an earlier wake recovery than the CO configuration. For 16-wind-direction layouts, both the IR and CO configurations indicate similar power distribution at gap/D = 2.0. For the first time, this study demonstrates the phase synchronization of two rotors via numerical simulation.

Smartphones have become an integral part of our everyday lives and keep us busy while doing other primary activities such as driving, cycling or walking in traffic. The problem of digital distraction among drivers has been largely addressed, and interest is growing also on vulnerable road users as well: In fact, high percentages of pedestrians and cyclists are accustomed to checking their devices while moving in traffic. This research links to the presented theme and aims to investigate the extent to which digital distraction in the form of social media app checking influences pedestrian behavior. The focus of the study is specifically on signalized intersections. An outdoor, eye-tracking experiment was conducted on a specific route consisting of various elements typical of urban areas. Participants were asked to walk the predefined route twice, en-countering three signalized intersections: the first time they were asked to walk with their smartphone in hand, the second time without. The recordings of each participant's route were then analyzed, examining reaction time, crossing time and speed, fixations, and gaze paths. The results show a clear impact of digital devices on pedestrians' attention by increasing their reaction and crossing times and decreasing crossing speeds. In addition, the analysis of fixations found that 82.54% of the time was devoted to the smartphone, while interest in other street ele-ments decreased from 16.64% to 4.03%.

During the last decades West Nile Virus (WNV) outbreaks have continuously occurred in the Mediterranean area. In August 2020 a new WNV outbreak affected 71 people with meningoencephalitis in Andalusia and 6 more cases in Extremadura (south-west of Spain), causing a total of eight deaths. The whole genomes of four viral isolates were obtained and phylogenetically analyzed in the context of recent outbreaks. The Andalusian viral samples belonged to the lineage 1 and were relatively similar to previous outbreaks occurred in the Mediterranean region. Here we present a detailed analysis of the outbreak, including an extensive phylogenetic study.

Rigid-body visual tracking is an active research field with many practical applications including visual surveillance and intelligent transport system. In this paper, we define a new problem domain, called visual growth tracking, to track different parts of an object that grow non-uniformly over space and time for application in image-based plant phenotyping. The paper introduces a novel method to detect and track each leaf of a plant for automated leaf stage monitoring. The method has four phases: optimal view selection, plant architecture determination, leaf tracking and generation of a leaf status report. The proposed method uses a graph theoretic approach to reliably detect and track individual leaves by overcoming the challenge of leaf-losses based on temporal image sequence analysis for automatically generating the leaf status report containing the following phenotypes, i.e., the emergence timing of each leaf, total number of leaves present at any time, the day on which a particular leaf stopped growing, and the length and relative growth rate of individual leaves. The proposed method demonstrates high accuracy in detecting leaves and tracking them through the early vegetative stages of maize plants based on experimental evaluation on a publicly available benchmark dataset.

Policy is a lever for initiating the structural and environmental changes that foster health-enhancing physical activity (HEPA) promotion. However, little is known about the evidence in support of local governments regarding their HEPA-promoting policies. This study collected comprehensive information on municipal HEPA policies on the French Riviera to gain an overview of HEPA policy development in this territory. Mid-sized cities from the two counties constituting the French Riviera were targeted (n = 17). In each city, a local tool for HEPA policy analysis, CAPLA-Santé, was used to gain information from key informants heading the departments of sports, health services and social services. Data were collected through semi-structured interviews and document analysis. Ten mid-sized cities volunteered to participate. Key informants from the sports (n = 10), health services (n = 5) and social services (n = 6) departments were interviewed. Written HEPA policy documents were formalized in six cities. These documents (n = 14) were mainly from the sports (n = 8) and health services (n = 4) sectors. The key informants reported that support from that national policy, the commitment of elected officials, and large local stakeholder networks facilitated HEPA promotion, whereas the lack of intersectoral collaboration and limited resources were limitations. The results provide insight into the development of municipal HEPA policies, highlighting some of the barriers, facilitators and perspectives. These findings could be valuable to scale up HEPA promotion at the local level.

It is important to distinguish between natural earthquakes and those induced by CO2 injection at carbon capture and storage sites. For example, the 2004 Mw 6.8 Chuetsu earthquake occurred close to the Nagaoka CO2 storage site during gas injection, but we could not quantify whether the earthquake was due to CO2 injection or not. Here we simulated changes of pore pressure during CO2 injection at the Nagaoka site and compared them with estimated natural seasonal fluctuations of pore pressure due to rainfall and snowmelt as well as estimated pore pressure increases related to remote earthquakes. We clearly distinguished changes of pore pressure due to CO2 injection from those due to rainfall and snowmelt. The simulated local increase in pore pressure at seismogenic fault area was much less than the seasonal fluctuations related to precipitation and increases caused by remote earthquakes, and the lateral extent of pore pressure increase was insufficient to influence seismogenic faults. We also demonstrated that pore pressure changes due to distant earthquakes are capable of triggering slip on seismogenic faults. The approach we developed could be used to distinguish natural from injection-induced earthquakes and will be useful for that purpose at other CO2 sequestration sites.

Multiple Sclerosis (MS) is a progressive neurodegenerative disease that affects more than 2 million people worldwide. Increasing knowledge about MS in different populations has advanced our understanding of disease epidemiology and variation in the natural history of MS among White and minority populations. In addition to differences in incidence, African American (AA) and Hispanic patients have greater disease burden and disability in earlier stages of disease compared to White patients. To further characterize MS in AA and Hispanic populations, we conducted a retrospective chart analysis of 112 patients treated at an MS center in Houston, Texas. Here, we describe differences in clinical presentation, MRI findings, treatment regimens, disability progression, and relapse rate. We found that patients who were evaluated by a neurologist at symptom onset had significantly decreased odds of greater disability [defined as Expanded Disability Status Scale (EDSS) &gt; 4.5] at last presentation compared to patients who were not evaluated by a neurologist (OR: 0.04, 95% CI: 0.16-0.9). We also found that active smokers had significantly increased odds of greater disability both at diagnosis and at last clinical encounter compared to nonsmokers (OR: 2.44, 95% CI: 1.10-7.10, OR= 2.44, 95% CI: 1.35-6.12, p= 0.01, respectively). Assessment of the degree of brain atrophy and progression over time along with enumeration of T1, T2, and gadolinium-enhancing brain lesions did not reveal differences across groups.