Introduction: The purposes of this study were to seek for overall ratio (OR) and anterior ratio (AR) patients data in normal occlusion and Angle’s malocclusion studies, and to assess if such results support Bolton’s standards as general references. Methods: Pubmed, Medline, CENTRAL and Scholar databases were searched up to February 2018 (CRD42018088438). Gray literature was explored through OpenGray. Non-randomized clinical studies, published in English and assessing Bolton’s OR and AR in normal occlusion and Angle’s malocclusion groups (Class I, Class II, Class II division 1, Class 2 division 2, Class III) patients were included. OR and AR means and standard deviations (SD) were collected. Potential covariates (study design, publication year, country where the study was conducted, number of cases, gender, mesiodistal measurement method, and calibration method) were also extracted. The National Health Heart Lung, and Blood Institute’s Quality Assessment Tool for Observational Cohort and Cross-Sectional Studies was used to assess each included studies quality. Pairwise Random-Effects and Multilevel Bayesian Network Meta-Analyses were used to synthesize available data. Results: Fifty-two observational studies were included (8872 participants; male/females 2674/3272; 16 studies lacked gender information). For normal occlusion, global pooled estimates for OR and AR means were 91.74% (95% CI: 91.37-92.10) and 78.24% (95% CI: 77.85-78.63), respectively. We could identify on Angle’s Class III patients meaningful OR and AR mean deviations from normal occlusion (0.89, 95% credible interval [CrI], 0.66-1.12, and 0.66, 95% CrI, 0.38-0.94, respectively), while on Class I patients we found a meaningful mean deviation from normal occlusion only for OR (0.25, 95% CrI, 0.03-0.47). Concerning gender impact, male patients presented higher OR (0.30, 95% CI 0.00-0.59) and AR (0.41, 95% CI 0.00-0.83) mean values than females in Class I. Conclusions: The results show that global pooled OR and AR mean values for normal occlusion patients are slightly above Bolton’s original values. Class I, for OR mean values, and Class III, for both OR and AR, are proportionally larger than normal occlusion patients. Gender had almost no impact on teeth mesiodistal proportion.

Maintaining a healthy cyber society is a big challenge due to the users’ freedom of expression and behaving. It can be solved by monitoring and analyzing the users’ behavior and taking proper actions towards them. This research aims to present a platform that monitors the public content on Twitter by extracting tweet data. After maintaining the data, the users’ interactions are analyzed using Graph Analysis methods. Then the users’ behavioral patterns are analyzed by applying Metadata Analysis, in which the timeline of each profile is obtained; also, the time-series behavioral features of users are investigated. Then in the Abnormal Behavior Detection Filtering component, the interesting profiles are selected for further examinations. Finally, in the Contextual Analysis component, the contents will be analyzed using natural language processing techniques; A binary text classification model (SVM + TF-IDF with 88.89% accuracy) for detecting if the tweet is related to crime or not. Then, a sentiment analysis method is applied to the crime-related tweets to perform aspect-based sentiment analysis (DistilBERT + FFNN with 80% accuracy); because sharing positive opinions about a crime-related topic can threaten society. This platform aims to provide the end-user (Police) suggestions to control hate speech or terrorist propaganda.

Background: In the functional data analysis (FDA), the hybrid or mixed data are scalar and functional datasets. The semi-functional partial linear regression model (SFPLR) is one of the first semiparametric models for the scalar response with hybrid covariates. Various extensions of this model are explored and summarized. Methods: Two first research articles, including “semi-functional partial linear regression model”, and “Partial functional linear regression” have more than 300 citations in Google Scholar. Finally, only 106 articles remained according to the inclusion and exclusion criteria such as 1) including the published articles in the ISI journals and excluding 2) non-English and 3) preprints, slides, and conference papers. We use the PRISMA standard for systematic review. Results: The articles are categorized into the following main topics: estimation procedures, confidence regions, time series, and panel data, Bayesian, spatial, robust, testing, quantile regression, varying Coefficient Models, Variable Selection, Single-index model, Measurement error, Multiple Functions, Missing values, Rank Method and Others. There are different applications and datasets such as the Tecator dataset, air quality, electricity consumption, and Neuroimaging, among others. Conclusions: SFPLR is one of the most famous regression modeling methods for hybrid data that has a lot of extensions among other models.

Cordyceps sinensis is one rare medicinal fungus produced in the Qinghai-Tibetan Plateau. Its quality and price varies hugely with different habitat, and its numerous substitutes have sprung up in functional food markets. This paper aims to discriminate the geographic origin of wild C. sinensis and its substitutes via the element analyzer-isotope ratio mass spectrometry and gas chromatography-isotope ratio mass spectrometry. The δ¹³C values of major fatty acids in the lipids of Cordyceps sinensis are characterized unanimously by the variation relation C_18:0 ﹤ C_18:2 ≈ C_16:0 ﹤ C_18:1; while their fluctuation intervals are notably different between those of neutral and polar lipids. The comparative analysis of the δ¹³C ratios of major fatty acids in lipids of Cordyceps sinensis suggests that the δ¹³C patterns may be sensitive potential indicators to discriminate its geographical origin. The δ¹³C values of individual major fatty acids of lipids from the cultivated stromata of Cordyceps militaris (SCM), the fermented mycelia of Hirsurella sinensis (FMH) and Paecilomyces epiali (FMP) range from −31.2‰ to −29.7‰, −16.9‰ to −14.3‰, and −26.5‰ to −23.9‰, respectively. Their δ¹³C pattern of individual major fatty acids may be used as a potential indicator to discriminate the products of natural C. sinensis and its substitutes.

We conducted a research study to create groundwork for personalized solutions within skin aging segment. This test utilises genetic and general laboratory data to predict individual susceptibility of weak skin characteristics, leveraging on the research on genetic polymorphisms related to skin functional properties. A cross-sectional study was conducted in collaboration between the Private Clinic Medicina Practica Laboratory (Vilnius, Lithuania) and the Public Institution Lithuanian University of Health Sciences (Kaunas, Lithuania). 370 participants agreed to participate in the project. The median age of respondents was 40, with a range of 19 to 74 years. After the literature search, we selected 15 polymorphisms of the genes related to skin aging subsequently distributed for different skin functions: SOD2(rs4880), GPX1(rs1050450), NQO1(rs1800566), CAT (rs1001179), TYR (rs1126809), SLC45A2 (rs26722), SLC45A2 (rs16891982), MMP1(rs1799750), ELN (rs7787362), COL1A1(rs1800012), AHR (rs2066853), IL6 (rs1800795), IL1Beta (rs1143634), TNF-α (rs1800629), AQP3(rs17553719). RT genotyping, blood count and immunochemistry results have been analysed using statistical methods. Obtained results showed significant associations among genotyping models and routine blood screens. These findings demonstrate the personalized medicine approach for aging segment and further add onto the growing field of literature. Further investigation is warranted to fully understand the complex interplay between genetic factors, environmental influences, and skin aging.

Chronic diseases are still known as incurable diseases, and we suspect that the medical research model is unfit for characterizing chronic diseases. In this study, we examined accuracy and reliability required for characterizing chronic diseases, reviewed implied presumptions in clinical trials and assumptions used in statistical analysis, examined sources of variances normally encountered in clinical trials, and conducted numeric simulations by using hypothetical data for several theoretical and hypothetical models. We found that the sources of variances attributable to personal differences in clinical trials can distort hypothesis test outcomes, that clinical trials introduce too many errors and too much inaccuracies that tend to hide weak and slow effects of treatments, and that the means of treatments used in statistical analysis have little or no relevance to specific patients. We further found that a large number of uncontrolled co-causal or interfering factors normally seen in human subjects can greatly enlarge the means and the variances of the experimental errors, and the use of high rejection criteria (e.g., low p values) further raises the chances of failing to find treatment effects. As a whole, we concluded that the research model using clinical trials is wrong on multiple grounds, under any of our realistic theoretical and hypothetical models, and that misuse of statistical analysis is most probably responsible for failure to identify treatment effects for chronic diseases and to detect harmful effects of toxic substances in the environment. We proposed alternative experimental models involving the use of single-person or mini optimization trials for studying low-risk weak treatments.

The goal of this article is to provide a review of the experimental techniques and procedures using vibration methods for the Structural Health Monitoring (SHM) of Polymer-Matrix Composites (PMC). It aims to be a guide for any researchers to carry out vibration experiments. The linear methods are first introduced. But as PMC is a complex material, these classic methods showed some limits, such as low accuracy for small damages, and a high environmental dependency. This is why the nonlinear methods are secondly studied, considering that the complexity of PMC induces a nonlinear behavior of the structure after damage occurrence. The different damage mechanisms are well explained in order to evaluate the potential of each vibration method to detect them.

The construction industry is responsible for 40 to 45% of primary energy consumption in Europe alone. Therefore, it is essential to find new materials with a lower environmental impact in order to attain sustainable housing. This study aims to determine and compare the environmental impact of two clay samples forming a basis for the manufacture of traditional brick, a standard material in building construction; traditional red clay brick and a brick based on clay mixed with a biological ingredient. The samples of fired clay were manufactured at the laboratory scale, the results being valid exclusively as indicators for the extrapolation of the analysis to other studies. The results of the environmental impact of these formulations have been examined through an evaluation of life-cycle analysis (LCA), observing that the incorporation of biological pore forming agents led to a decrease of around 15 to 20% of all impact categories studied. Thus, the suitability of using biological-based additives in clay bricks was confirmed both for their constructive characteristics (lighter material) and increased energy efficiency (better thermal insulation) considering the environmental point of view.

The performance of a small reconfigurable unmanned aerial vehicle (UAV) is evaluated, 1 combining a multidisciplinary approach in computational analysis of additive manufactured struc- 2 tures, fluid dynamics, and experiments. Reconfigurable UAVs promise cost savings and efficiency 3 without sacrificing performance, while demonstrating versatility to fulfill different military mission 4 profiles. The use of computational fluid dynamics (CFD) in UAV design produces higher accuracy 5 aerodynamic data, which is particularly important for complex aircraft concepts such as blended 6 wing bodies. To address challenges relating to anisotropic materials, the Tsai-Wu failure criterion is 7 applied to structural analysis, using CFD solutions as load inputs. Aerodynamic performance results 8 show the low-speed variant attains an endurance of 1 hour, 48 minutes, whereas for its high-speed 9 counterpart, it is 29 minutes at 66.7% higher cruise speed. Each variant serves different aspects of 10 small UAS deployment in combat, with low-speed envisioned for close surveillance, and high-speed 11 for incursions. Experimental and simulation results suggest room for design iteration, in wing area 12 and geometry adjustments. Structural simulations demonstrated the need for airframe improvements 13 in the low-speed configuration. This paper highlights the potential of reconfigurable UAVs to disrupt 14 the industry, advocating for further research and design improvements.

A modern binary executable is a composition of various networks. Control flow graphs are commonly used to represent an executable program in labeled datasets used for classification tasks. Control flow and term representations are widely adopted, but provide only a partial view of program semantics. This study is an empirical analysis of the networks composing malicious binaries in order to provide a complete representation of the structural properties of a program. This is accomplished by the measurement of structural properties of program networks in a malicious binary executable dataset. We demonstrate the presence of Scale-Free properties of network structure for program data dependency and control flow graphs, and show that data dependency graphs also have Small-World structural properties. We show that program data dependency graphs have a degree correlation that is structurally disassortative, and that control flow graphs have a neutral degree assortativity, indicating the use of random graphs to model the structural properties of program control flow graphs would show increased accuracy. By providing an increase in feature resolution within labeled datasets of executable programs we provide a quantitative basis to interpret the results of classifiers trained on CFG graph features. An increase in feature resolution allows for the structural properties of program classes to be analyzed for patterns as well as their component parts. By capturing a complete picture of program graphs we can enable theoretical solutions for the mapping a program's operational semantics to its structure.

This study proposed a spatially and temporally improving methodology adopting the Regional Frequency Analysis with L-moments approach to estimate rainfall quantiles from 22787 grids of radar rainfall in Taiwan for a 24-hour duration. Due to limited radar coverage in the eastern region, significant discordant grids were found in the coastal area of the eastern region. A K-means cluster analysis using scaled at-site characteristics was used to group the QPESUMS grids in Taiwan into 22 clusters/sub-regions based on their characteristics. Spatially, homogeneous subregions with QPESUMS data produce more detailed homogeneous subregions with clear and continuous boundaries, especially in the mountain range area where the number of rain stations is still very limited. According to the results of z-values and L-moment ratio diagrams, the Wakeby (WAK), Generalized Extreme Value (GEV), and Generalized Pareto (GPA) distributions of rainfall extremes fitted well for the majority of subregions. The Wakeby distribution was the dominant best-fitted distribution, especially in the central and eastern regions. The east of the northern part and southern part of Taiwan had the highest extreme rainfall for each return period. Both areas were frequently struck by typhoons. By using grid-based (at-site) as the basis for assessing regional frequency analysis, the results show that the regional approach in determining extreme rainfall is very suitable for large-scale applications and even better for smaller scales such as watershed areas. The spatial investigation was performed by establishing regions of interest in small subregions across the northern part. It showed that regionalization was correct and consistent.

The goal is to reduce poverty, the method used is a literature study to see the effect of using Financial Technology (Fintech) on financial inclusion, method to see the effect of financial inclusion on poverty. From the results of the tests, the use of Fintech can increase financial inclusion, thereby encouraging poverty alleviation. It can be seen that the Financial Inclusion variable has a significant and negative effect on the poverty variable. This shows that countries that have high levels of financial inclusion are generally estimated to have low poverty rates. Increasing a country's financial inclusion can reduce poverty.

Sarcasm is a linguistic expression often used to communicate the opposite of what is said, usually something that is very unpleasant with an intention to insult or ridicule. Inherent ambiguity in sarcastic expressions, make sarcasm detection very difficult. In this work, we focus on detecting sarcasm in textual conversations from various social networking platforms and online media. To this end, we develop an interpretable deep learning model using multi-head self-attention and gated recurrent units. Multi-head self-attention module aids in identifying crucial sarcastic cue-words from the input, and the recurrent units learn long-range dependencies between these cue-words to better classify the input text. We show the effectiveness of our approach by achieving state-of-the-art results on multiple datasets from social networking platforms and online media. Models trained using our proposed approach are easily interpretable and enable identifying sarcastic cues in the input text which contribute to the final classification score. We visualize the learned attention weights on few sample input texts to showcase the effectiveness and interpretability of our model.

To ensure sustainable production and consumption in the agricultural sector, it is necessary to assess the contribution of each element of the nexus in the agricultural production chain. The aim of this study is to make a quantitative and qualitative analysis of the contributions of each element of the energy, water, waste and land nexus to agricultural products. A composite method approach combining aspects based on input-output model, Location Quotient (LQ) as well as competitive position is adopted. A database of nexus elements over a period from 2009 to 2018 is used for Cameroon, with ten regions considered. The results show proportions of around 0.42% energy, 67.88% water withdrawal, 11.91% harvested area, 97.81% waste for agricultural products. The geolocation of harvested areas shows that the largest portion is in the far north (1,373,829 ha) and the smallest in Adamawa (224,038 ha). Maximum production is in the central region (4,334,095 tons) and minimum in the Adamawa region (915,841 tons). The central, littoral and west regions are more representative of agricultural products. The analysis of the competitive position of agricultural products contributes to a better orientation of national strategies for agricultural sustainability according to existing potentials.

The larvae of some species of the subgenus Orthocladius s. str. (Diptera, Chironomidae) are here described for the first time with corrections and additions to the descriptions of adult males and pupal exuviae. The identification of larvae is generally not possible without association with their pupal exuviae and/or adult males, so the descriptions here are based only on reared material or on pupae with the associated larval exuviae. Usually, Chironomidae larvae can be separated on the basis of morphometric characters, and the most discriminant characters ones are: 1- the ratio between the width of median tooth of mentum (Dm) and the width of the first lateral tooth (Dl) = mental ratio (DmDl), 2- the ratio between the length of the first antennal segment (A1) and the combined length of segments 2-5 (A(2-5)2-5) = antennal ratio (AR). The shape of mandible, maxilla, and other body parts are almost identical in all the species considered in this study. The larva of Orthocladius (Symposiocladius) lignicola is very characteristic and can be separated by the shape of mentum and the larvae of all the known species of Symposiocladius are characterized by the presence of large Lauterborn organs on antennae and of tufts of setae on abdominal segments. The larvae of Orthocladius (Orthocladius) oblidens and Orthocladius (Orthocladius) rhyacobius can be distinguished from other species basing on their large Dm and to each other by AR. A principal component analysis was carried out using 5 characters: 1- Dm, 2- Dl, 3- length of A1, 4- width of A1 (A1W), 5- combined length of segments 2-5 (A2-5). The most discriminant characters were Dm and A1, confirming that DmDl and AR can be used to separate species at larval stage, but the large superposition of morphometric characters in different species confirms that association with pupal exuviae is in any case needed to identify larvae. In future perspective, the development of reference DNA barcodes from specimens identified by specialists is recommended since possibly the best tool for larvae identification, but association of barcodes with morphotypes is in any case fundamental.

Improving HIV testing efficiency saves financial and material resources for health. We conducted a retrospective secondary data analysis of routinely collected HIV risk screening program data in Uganda, from October to November 2019, to determine the performance characteristics of the adolescent and adult HIV risk screening tool in public health facility settings. A total of 19,854 clients had been screened for HIV testing eligibility and tested for HIV. The overall positivity rate (cluster weighted prevalence of HIV) among those screened was 4.5% (95% CI: 4.1%-4.8%) versus 3.71% (95% CI: 3.06-4.50) among those not screened. The sensitivity and specificity of the risk screening tool were 90.7% (95% CI: 88.4%, 92.7%) and 75.8%, (75.2-76.4) respectively. With screening, the number needed to test to identify one PLHIV was reduced from 27 to 22. Although risk screening would have led to a 24.5% (4,825/19,704) reduction in testing volume, 9.3% (68/732) of PLHIV would have been missed, being misclassified as not eligible for testing. The cost per PLHIV identified fell by 3% from $69 without screening to $66.9 with screening. We recommend the use of scientifically validated HIV risk screening tools, and a need to explore the use of HIV self-testing as a test for tirage.

Smartphone-based mobility apps enable users to make informed transportation decisions, offering instant access to transport-related information. This development has created a smartphone-enabled ecosystem of mobility services in developed countries while it is slowly picking up pace in the global south, which can contribute towards the decarbonization of urban transport. Work on this has already started in India, and there is considerable evidence indicating the profound impact of these apps on the perceived utility and usage of transport modes, with far-reaching implications for sustainable development goals (SDGs). However, for most users, the use of smartphone apps is a novel trend, and the knowledge of the impacts of usage of existing apps on the usage pattern of transport modes by various user groups is essential for positioning new consolidated app-based services soon. Against this backdrop, the present study uses latent class cluster analysis to empirically investigate the impacts of mobility apps on transport mode usage patterns in Delhi by classifying users into latent classes based on socioeconomic characteristics, attitudes/preferences, smartphone app usage, and mode usage pattern. The characteristics of the latent class and factors affecting the individual’s probability of being classified to these cluster have been discussed, along with some measures to encourage app-based mobility for each cluster.

Optical communications are described and analyzed by shaped beams; we challenge the ‎effects of parameters that impact the profile of a Flat Top Gaussian (FTG) beam. When ‎the laser beam propagates throughout the atmosphere, it can be influenced by different ‎optical phenomena including scattering, absorption, and turbulence due to changes in the ‎scintillation index and the forms of intensity that are displayed in the source and receiver ‎planes. In this project, the FTG laser beam that propagates through a weak turbulent ‎region is numerically investigated using open-source software. This simulation will be ‎performed according to a mathematical model based on the split-step beam propagation ‎method. Intensity distributions at the source plane and the received average intensity in ‎atmospheric turbulence are calculated, and additional contour is in the transducer plane. ‎The scintillation index, structure constant, source size, and other parameters, are applied ‎in the Rytov method to quantify the weak turbulent model. Moreover, these parameters ‎are analyzed in near-field propagation. Also, the effects of the beam’s scintillation and ‎beam wander are determined. All results simulated are discussed and compared with the ‎TEM00 Gaussian beam. Finally, these results are compared to measurements in the ‎experimental part of the work.

INTRODUCTION: The purpose of the study was to determine (a) the overall preclinical character; (b) the cumulative cutoff values and the risk ratio, and (c) the factors associated with severity by a unidimensional and multidimensional analysis on 2173 Sars-Cov2 patients. METHODS: The machine learning study population consisted of 2173 patients (1587 mild and non symptoms patients, 377 moderate patients, 209 severe patients). The status of the patients was recorded from September 2021 to March 2022. RESULTS: The Covid19 Severity directly links with a significant correlation to Age, Score index of the chest X-ray, percentage and quantity of neutrophils, Albumin, C reactive protein, and ratio of Lymphocytes. Their important cut off values (from regression analysis) respectively are: 77.56 years old (the mild-moderate group), 5.53 (the mild-moderate group) and 10.51 (the moderate-severe group), 84.80% (the mild-moderate group) and 87.74%(the moderate-severe group), 11.77G/L (the moderate-severe group), 29.73g/L (the moderate-severe group), 7.46mg/dL (the mild-moderate group), 6.32% (the moderate-severe group). Their significant (p<0.0001) R score correlation with the severity of Covid19, are: 0.44, 0.52 and 0.52, 0.33 and 0.44, 0.42, -0.43, 0.40, -0.41. Their significant risk ratio (p<0.00001) from the meta-analysis, respectively are: 4.19 [3.58-4.95], 3.29 [2.76-3.92] and 3.03 [2.4023;3.8314], 3.18 [2.73-3.70] and 3.32 [2.6480;4.1529], 3.15 [2.6153;3.8025], 3.4[2.91-3.97], 0.46 [0.3650;0.5752] (p<0.00001), 0.34 [0.2743;0.4210]. The pair ALT – Leucocytes and Transferrin – Anion Chloride get the most important correlation shift. ALT – Leucocytes show the important negative link (R=-1, p<0.00001) in the mild group to the significant positive correlation in the moderate group (R=1, p<0.00001). Transferrin–anion Chloride has an important positive association (R=1, p<0.00001) in the mild group with a significant negative correlation in the moderate group (R=-0.59, p<0.00001). The network map and HCA show that in the mild-moderate group, the closest neighbors with the Covid19 severity are ferritins, Age. Then there is C-reactive protein, SI of X-ray, Albumin, and Lactate dehydrogenase, which are the next close neighbors of these three factors. In the moderate-severe group, the closest neighbors with the Covid19 severity are Ferritin, Fibrinogen, Albumin, the quantity of Lymphocytes, SI of X-ray, white blood cells count, Lactate dehydrogenase, and quantity of neutrophils. CONCLUSIONS: Complete multidimensional study in 2173 Covid19 patients in Vietnam shows the whole picture of all the preclinical factors, which may become the clinical reference marker for surveillance and diagnostic management

Background: United Nations Sustainable Development Goals state that by 2030, the Global maternal mortality rate (MMR) should be lower than 70 per 100,000 live births. MMR is still one of Africa's leading causes of death among women. This research aims to study regional trends in maternal mortality in Africa. Methods: We extracted data for Maternal mortality rates per 100,000 births from the UNICE data bank from 2000 to 2017, being 2017 the last date available. Joinpoint regression was used to study the trends and estimate the annual percent change (APC). Results: Maternal mortality has decreased in Africa over the study period by an average APC of -3.0% (95% CI -2.9;-3,2%). All regions showed significant downward trends, with the sharpest decreases in the South. Only the North African region is close to the United Nations' sustainable development goals for Maternal mortality. The remaining sub-Saharan African regions are still far from achieving the goals. Conclusions: maternal mortality has decreased in Africa, especially in the South Africa region. The only region closed to the United Nations target is North Africa. The remaining sub-Saharan African regions are still far from achieving the goals. These results could be used for the development of Regional Policies.

Studying Active Transportation (AT) is widespread in America and Europe's research and stud-ies that include Latent variables (LV) are growing to identify exact results of finding what to do to increase the utility of AT. LVs help us to have more accurate research. LVs are defined as psy-chological factors like feeling safe while you ride at night and thus they are not subjective and hard to understand but very important to increase the utility of using AT modes. In this study, most of the previous studies about bicycling have been reviewed. In this research, different var-iables including subjective and LVs are conducted for maximizing the use of bicycle utility and introduced to have better sight for future researchers to deal with modeling AT mode choice. Results represent the importance of having 'will' for using a bicycle, especially in difficult situa-tions and cultural barriers that affect the cycling of women.

Village has a vital role in the national development efforts. The concept of development considered village as an object instead of a subject of development. This study focused on determining the important points in enabling a village to be independent by shifting the paradigm of “building the village” into “the building village”. This study was an exploratory research of public policies with qualitative legal studies. This study was conducted in 3 villages in Bandung regency with different characteristics, namely Neglawangi with urban characteristics, Cibiru Wetan with sub-urban characteristics, and Rancamanyar with plural characteristics. The results of this study showed that the wise step in building an independent village is through “the building village” road maps. First, encourage the inception of critical and care community and community organizations who dynamically interact in the policy making processes of village development. Second, implement a participative, accountable, and transparent planning and budgeting system within the limits of their authorities. Third, empower inclusive village economic institutions. The three road maps can succeed if they are supported by good implementation of participative, systematic, effective and efficient planning and budgeting system, as well as good monitoring.

The diffraction-like process displayed by a spatially localized matter wave is here analyzed in a case where the free evolution is frustrated by the presence of hard-wall-type boundaries (beyond the initial localization region). The phenomenon is investigated in the context of a nonrelativistic, spinless particle with mass m confined in a one-dimensional box, combining the spectral decomposition of the initially localized wave function (treated as a coherent superposition of energy eigenfunctions) with a dynamical analysis based on the hydrodynamic or Bohmian formulation of quantum mechanics. Actually, such a decomposition has been used to devise a simple and efficient analytical algorithm that simplifies the computation of velocity fields (flows) and trajectories. As it is shown, the development of space-time patters inside the cavity depends on three key elements: the shape of the initial wave function, the mass of the particle considered, and the relative extension of the initial state with respect to the total length spanned by the cavity. From the spectral decomposition it is possible to identify how each one of these elements contribute to the localized matter wave and its evolution; the Bohmian analysis, on the other hand, reveals aspects connected to the diffraction dynamics and the subsequent appearance of interference traits, particularly recurrences and full revivals of the initial state, which constitute the source of the characteristic symmetries displayed by these patterns. It is also found that, because of the presence of confining boundaries, even in cases of increasingly large box lengths, no Fraunhofer-like diffraction features can be observed, as happens when the same wave evolves in free space. Although the analysis here is applied to matter waves, its methodology and conclusions are also applicable to confined modes of electromagnetic radiation (e.g., light propagating through optical fibers).

The effectiveness of a recently proposed methodology in the identification of damage in planar, multi-storey, Reinforced Concrete (RC) moment-frames, which develop a plastic-yield mechanism on their beams, is showcased here via the examining of a group of such existing multi-storey frames with three or more unequal spans. According to the methodology, the diagram of the instantaneous Eigen-Frequencies of the frame in the nonlinear regime is drawn as a function of the inelastic seismic roof displacement by performing a sequence of pushover and instantaneous modal analyses with gradually increasing target displacement. Using this key-diagram, the locations of severe seismic damage in an existing moment-frame can be evaluated if the instantaneous fundamental eigen-frequency of the damaged frame, at an analysis step within the nonlinear area, is known in advance by “the monitoring and the identification of frequencies” using a local network of uniaxial accelerometers. This is a hybrid technique because both procedures, the instrumental Monitoring of the structure and the Pushover analysis on the frame (M and P technique), are combined. Moreover, the damage image of the planar multi-storey moment-frame is illustrated, and the lateral stiffness matrix of the damaged frame is calculated with high accuracy.

The building and construction sector has a significant impact on CO2 emissions and pollutants released into the atmosphere, which contribute to climate change. The EPDB Directive mandates the achievement of a minimum energy class E for all residential buildings by 2030 and an energy class D by 2033. Particularly, in Italy, about 86% of the existing building stock predates the enactment of any energy laws and regulations, making it imperative to apply the energy efficiency interventions. This paper provides a support decision tool for the identification of standardized interventions on the envelope, air conditioning system and domestic hot water production. The study is focused on a specific construction period class (1976 - 1990) in six different climatic zones. The methodological approach is based on a cataloguing phase and definition of Ante Operam energy classes, on the case study identification, the energy requalification interventions identification, solutions simulations, cost estimation. By simulating standardized interventions for each climatic zone, a range of possible combinations will be identified. The most advantageous ones will be determined based on a cost-benefit analysis, considering the potential class jump achieved. The research result is a matrix of energy efficiency interventions that is applicable to each climatic zone and can be extended to the existing housing stock.

HybridAC/DC microgrids(HMG) are emerging as an attracting method for integrating the AC/DC distributed energy resources(DERs) with the features of high-performance and low-cost. In the isolated hybrid AC/DC microgrid (IHMG), the key problem is how to balance the power variation and regulate the voltage and frequency. Various energy storage systems (ESS)and interlinking converter (IC) technologies are viable for this application. The present study proposes a novel unified power flow model to evaluate and compare the abilities of the ESS with different connection topologies and ICs with different control approaches to maintain the voltage and frequency stability of the IHMG. In order to investigate the performance of the proposed scheme, five operation modes of the IHMG are defined and explained. The classification is based on the connection topologies and control modes of the ESS/IC in the IHMG. Then, a set of generic PF equations are derived. Moreover, three binary matrices are applied in the construction of the unified power equations. These matrices are used for describing the running state of the IHMG. Finally, in order to verify the proposed scheme, it is applied to several case studies of the IHMG. The operation characteristics of multi-DC subgrids IHMG in different modes, particularly when an external disturbance occurs, are investigated.

The Klaten Regency, Central Java Province, Indonesia is an leptospirosis endemic area. This study’s purpose is to spatially describe the abiotic and biotic environmental factors with the Leptospirosis incidence in the Klaten Regency in 2018. This was a descriptive observational with cross-sectional approach conducted in the Klaten Regency, Central Java, in 2019 with 59 respondents. The results revealed that the percentage of abiotic environment factors such as poor waste disposal facilities, poor gutter conditions, river <200 meters, and flooding history, namely 35.6%; 41.2%; 54.2%; and 6.8%, respectively. The highest leptospirosis cases occurred in April 2018 with 325 mm of rainfall, average temperature of 270C, average humidity of 82.3%, and altitude of 100-200 MASL (79.7%). Meanwhile, biotic factors included rat nest existence (100%), having pets at risk (32.2%), and ≥3 types of vegetation (79.7%). In conclusion, most respondents' dominant environmental factors were presence of rat nests, ≥3 vegetation types, and river availability <200 meters.

As major natural disasters in grassland areas, fires and dust events seriously threaten human safety, property, and animal husbandry. Furthermore, these phenomena may be mutually reinforcing, which can lead to more severe cascading disasters. However, few studies have been on the mechanisms of grassland fire and dust events disaster chain. Therefore, we selected Dornod aimag (province), a typical temperate grassland, as the study area and analyzed the spatiotemporal variation patterns of grassland fires and dust weather, as well as the effect of grassland fires on dust weather based on MCD64A1 Burnt Area data and SYNOP dust data. The mechanism of grassland fires on dust weather was further investigated using the MOD13A3 vegetation index product and ERA5 wind speed, wind direction, and precipitation data. The results revealed that grassland fires and dust weather varied spatially across the study area. Furthermore, grassland fires occurred mainly in spring (April to May), summer (June), and autumn (October), while dust weather mainly occurred in spring (March to May). Moreover, autumn, winter, and spring cumulative grassland fires (both days and area) substantially affected the spring total dust weather days and dust storm days, particularly the spring cumulative dust storm days. Additionally, higher precipitation in the summer of 2014 resulted in higher vegetation coverage and more fuel in the autumn and winter of 2014, and even in the spring of 2015. As a result, the cumulative grassland fire days was higher, and the area was larger from September 2014 to April 2015, leading to a considerable increase in the cumulative dust storm days in May 2015. This study has important implications for disaster prevention and mitigation, ecological and environmental protection, and sustainable development in grasslands.

Sulfate transporters (SULTRs) are responsible for the uptake of the sulfate (SO42−) ions in the rhizosphere by the roots and their distribution in plant organs. In this study, SULTR family members in the genome of the two oilseed crops, Camelina sativa, and Brassica napus, were identified and characterized based on their sequence structure, duplication events, phylogenetic relationships, phosphorylation sites, and expression levels. Herein, 36 and 45 putative SULTR genes were recognized from the genome of C. sativa, and B. napus, respectively. SULTR proteins were predicted as basophilic proteins with low hydrophilicity in both studied species. According to phylogenetic relationships, we divided SULTRs into five groups, in which SULTRs 3 showed highest variation. Besides, several duplication events were observed between SULTRs. The first duplication event was predicted approximately five million years ago between three SULTRs 3.1 in C. sativa. Two subunits were indicated in the 3D structure of SULTRs that the active binding sites differed between C. sativa and B. napus. According to available RNA-seq data, SULTRs showed diverse expression in tissues and response to stimuli. SULTRs 3 showed an expression in all tissues. SULTRs 3.1 were more upregulated in response to abiotic stresses in C. sativa, while SULTRs 3.3, and SULTRs 2.1 showed an upregulation in B. napus. Furthermore, SULTRs 3 and SULTRs 4.1 showed an upregulation in response to biotic stresses in B. napus. Based on the distribution of cis-regulatory elements in the promoter region, we speculated that SULTRs might be controlled by phytohormones such as ABA, and MeJA. Therefore, it seems that SULTR genes in C. sativa have been more influenced by evolutionary processes and have acquired more diversity.

Statistical data on officially registered cases of health care-associated infections (HCAIs) in Ukraine in the period 2009-2019 have been analysed. On average, 5089±756 cases of HCAIs were registered annually. Odessa region of Ukraine is the leading country in the number of reported cases. The majority of HCAIs cases involve surgical and therapeutic invasive interventions and perinatal HCAIs. On average, 78.0±5.8 % of HCAIs cases involved adults. The estimated minimum number of HCAIs in Ukraine was expected to be about 1 million per year. Official statistics on registered cases of HCAIs in Ukraine do not reflect reality, so the system of registration and investigation of HCAIs in Ukraine needs to be reformed.

This paper examines whether the Great Recession has altered the disparities of the US regional health care expenditures. We test the null hypothesis of convergence for the US real per capita health expenditure for the period 1980-2014. Our results indicate that the null hypothesis of convergence is clearly rejected for the total sample as well as for the pre-Great Recession period. Thus, no changes are found in this regard. However, we find that the Great Recession has modified the composition of the estimated convergence clubs, offering a much more concentrated picture in 2014 than in 2008, with most of the states included in a big club, and only 5 (Nevada, Utah, Arizona, Colorado and Georgia) exhibiting a different pattern of behavior. These two estimated clubs diverge and, consequently, the disparities in the regional health sector have increased.

Our paper deals with an advanced statistical tool for the volatility prediction problem in financial (crypto) markets. Firstly, we consider the conventional GARCH involved volatility models. We next extend the corresponding GARCH based forecasting and calculate a specific probability associated with the predicted volatility levels. Since the probability evaluation is based on a stochastic model, we next develop an additional data-driven estimation of this probability. The proposed advanced statistical estimation uses real (historical) market data. The obtained theoretic results for the statistical probability of levels are also discussed in the framework of the integrated volatility concept. A possible application of the established probability estimation to the volatility clustering problem is also mentioned. Our paper includes a concrete practical implementation of the resulting (combined) volatility prediction tool and considers a novel module for trading and volatility estimation in crypto markets recently developed by 1ex Trading Board group in collaboration with the GoldenGate Venture. Moreover, we discuss shortly a possible using of the proposed model based and data-driven volatility prediction methodology in the financial risk management.

With the continuous improvement of people's quality of life and aesthetics, furniture products have higher requirements. Excellent solid wood chairs are the most representative products in furniture to enhance space and taste and whose design may significantly impact consumers' emo-tional experience and purchase decisions. This study aims to evaluate how the modeling imagery of solid wood chairs affects user preferences and emotional experiences. The development of the current era is inseparable from the analysis of big data. Firstly, a representative sample was ob-tained by multidimensional scaling (MDS), and the sample was analyzed and evaluated by fac-tor analysis. Moreover, five groups of adjective vocabulary were selected to describe the model-ing imagery of solid wood chairs, such as "balanced and coordinated", "unique and novel", "prac-tical and simple", "quality and detailed" and "traditional and plain". Further, the triangular fuzzy theory was applied to analyze and discuss the 12 types of solid wood chairs in the five groups of adjective vocabulary. Then the study verified that the differences in the evaluations of the 12 sam-ples in the "unique and novel" and "quality and detailed" groups were significant, but more minor differences in the groups of "traditional and plain", "balanced and coordinated" and "practical and simple". Through comprehensive comparison, five groups with similar modeling imagery were created, and solid wood chairs with different modeling imagery should be placed in suita-ble spaces. According to the results of this study, the evaluation of the modeling imagery of solid wood chairs can not only rely on subjective judgments but can be reasonably described through data analysis and mathematical algorithms. It can scientifically and effectively reflect the poten-tial perception needs of consumers on the modeling imagery of solid wood chairs, as well as help to improve the design efficiency of the furniture product development stage.

Nowadays, with smartphones people can easily take photos, post photos to any social networks and use the photos for some purposes. This leads to a social problem that unintended appearance in photos may threaten the privacy of photographed person. Some solutions to protect facial privacy in photos have already been proposed. However, most of them rely on different techniques to de-identify photos which can be done only by photographers, giving no choice to photographed person. To deal with that, we propose an approach that allows photographed person to proactively detect whether someone is intentionally/unintentionally trying to take pictures of him/her. Thereby, he/she can have appropriate reaction to protect the privacy. In this approach, we assume that the photographed person uses a wearable camera to record the surrounding environment in real-time. The skeleton information of likely photographers who are captured in the monitoring video is then extracted to be put into the calculation of dynamic programming score which is eventually compared with a threshold for recognition of photo-taking behavior. Experimental results demonstrate that by using the proposed approach, the photo-taking behavior is precisely recognized with high accuracy of 92.5%.

Bacteria belonging to the genus Micromonospora are recognized as microorganisms with potential to be used in biotechnology processes, including their beneficial influence on plant growth and biocontrol of phytopathogens. In this study, nineteen Micromonospora isolates originating from root nodules of white clover plants were taxonomically assigned based on the phylogenetic analysis of the 16S rRNA gene and four housekeeping genes. The antifungal properties of the bacteria against phytopathogenic Botrytis cinerea, Fusarium oxysporum, Fusarium equiseti, Sclerotinia sclerotiorum, and Verticillium albo-atrum were tested with the agar plug test and the dual culture test. The ability to produce various metallophores was determined with the agar plug diffusion test on modified CAS agar medium. ISP2 broth amended with 0.2% L-tryptophan was used to indicate the bacterial ability to produce auxins. Strains belonging to M. tulbaghiae, M. inaquosa, and M. violae showed in vitro potential as antimicrobial agents against the tested fungi. M. inaquosa strain 152, M. violae strain 126, M. violae strain 66 and M. violae strain 45 were recognized as the most efficiency metallophores producers. M. alfalfae strain 55 and M. lupini strain 5052 were identified as the most promising auxin compound producers and, therefore, as potential plant growth promoting bacteria.

The Lamiaceae belong to the species-richest families of flowering plants and harbor many species used as herbs or for medicinal applications, such as Basils or Mints. Evolution of this group has been driven by chemical speciation, mainly of Volatile Organic Compounds (VOCs). The commercial use of these plants is characterized by a large extent of adulteration and surrogation. To authenticate and discern the species, is, thus, relevant for consumer safety, but usually requires cumbersome analytics, such as Gas Chromatography, often to be coupled with Mass Spectroscopy. We demon-strate here that quartz-crystal microbalance (QCM)-based electronic noses provide a very cost-efficient alternative, allowing for a fast, automated discrimination of scents emitted from leaves of different plants. To explore the range of this strategy, we used leaf material from four genera of Lamiaceae along with Lemongrass as similarly scented, but non-related outgroup. In order to unambiguously differentiate the scents from the different plants, the output of the 6 different SURMOF/QCM sensors was analyzed using machine learning (ML) methods, together with a thorough statistical analysis. The exposure and purging datasets (4 cycles) obtained from a QCM-based, low-cost homemade portable e-Nose were analyzed with Linear Discriminant Analysis (LDA) classification model. Prediction accuracies with repeating test measurements reached values of up to 90%. We show that it is not only possible to discern and identify plants on the genus level, but even to discriminate closely related sister clades within a genus (Basil), demonstrating that e-Noses are a powerful technology to safeguard consumer safety against the challenges of globalized trade.

We analyze the question of GDP Growth-GDPG rate in the context of Environmental, Social and Governance-ESG framework. We use World Bank data for 193 countries in the period 2011-2020 using different econometric techniques i.e., Panel Data with Fixed Effects, Panel Data with Random Effects, Pooled Ordinary Least Squares-OLS. We found that GDPG rate is positively associated, among others, to “Government Effectiveness” and “Prevalence of Undernourishment” and negatively associated among others to “Unemployment” and “Research and Development Expenditure”. Furthermore, we have applied the k-Means algorithm optimized with the Elbow method and we found the presence of four clusters in the sense of GDPG rate. Finally, we confront eight machine learning algorithms to predict the value of GDPG rate and we found that the Polynomial Regression is the best predictor. The Polynomial Regression predicts an increase of GDPG rate equal to 2.88% on average for the analysed countries.

We present the real number system as a natural generalization of the natural numbers. First, we prove the co-finite topology, $Cof(\mathbb N)$, is isomorphic to the natural numbers. Then, we generalize these results to describe the continuum $[0,1]$. Then we prove the power set $2^{\mathbb Z}$ contains a subset isomorphic to the non-negative real numbers, with all its defining structure of operations and order. Finally, we provide two different constructions of the entire real number line. We see that the power set $2^{\mathbb N}$ can be given the defining structure of $\mathbb R$. The constructions here provided give simple rules for calculating addition, multiplication, subtraction, division, powers and rational powers of real numbers, and logarithms. The supremum and infimum are explicitly constructed by means of a well defined algorithm that ends in denumerable steps. In section 5 we give evidence our construction of $\mathbb N$ and $\mathbb R$ are canonical; these constructions are as natural as possible. In the same section, we propose a new axiomatic basis for analysis. In the last section we provide a series of graphic representations and physical models that can be used to represent the real number system. We conclude that the system of real numbers is completely defined by the order structure of $\mathbb N$.}

Variable Angle Tow (VAT) laminates offer a promising alternative to classical straight fiber composites in terms of design and performance. However, analyzing these structures can be more complex due to the introduction of new design variables. Carrera's Unified Formulation (CUF) has been successful in previous works for buckling, vibrational, and stress analysis of VAT plates. Typically, one-dimensional (1D) and two-dimensional (2D) CUF models are used, with a linear law describing the fiber orientation variation in the main plane of the structure. The objective of this article is to expand the CUF 2D plate finite elements family to perform free vibration analysis of composite laminated plate structures with curvilinear fibers. The primary contribution is the application of Reissner's Mixed Variational Theorem (RMVT) to a CUF finite element model. The Principle of Virtual Displacements (PVD) and RMVT are both used as variational statements for the study of monolayer and multilayer VAT plates dynamic behavior. The proposed approach is compared to Abaqus three-dimensional (3D) reference solutions, classical theories and literature results to investigate the effectiveness of the developed models. Results demonstrate that mixed theories provide the best approximation of the reference solution in all cases.

Total Hip Arthroplasty (THA) is a common surgical procedure used to treat hip osteoar-thritis and other joint conditions that cause pain and functional limitation. Traditionally, THA has been most performed in elderly patients, but in recent years there has been an in-crease in hip arthroplasties in young patients. Femoral prosthesis rupture is a rare but sig-nificant complication that can also occur in young patients undergoing total hip arthro-plasty (THA). Some of the factors that can contribute to femoral prosthesis ruptures include abnormal overload, defects in the design lack of geometric fit, type of materials used in the stem and femoral head connection. The aim of this study is to analyze the criticalities in the contact between the femoral head and the stem neck. In particular, the two types of con-tacts will be taken into consideration: proximal and distal and through the finite element method (FEA) the criticalities will be defined. The results show that in the proximal contact the voltages are higher than 500 Mpa. This is due to the fact that there are higher circum-ferential voltages. In addition, to prevent bacterial infiltration or debris from the outside, the distal connection is the recommended one.

Recently, the outbreak of coronavirus disease 2019 (COVID-19) is threatening human health globally. There is a dire need to find potential therapeutic agents. Angiotensin converting enzyme 2 (ACE2), as an entry receptor of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), is considered as potential therapeutic target in COVID-19 pandemic. Here, our bioinformatics analysis revealed that the biological function of ACE2 was correlated with regulation of blood pressure and mediation of SARS-CoV-2 entry into host cells. Ten ACE2 cooperative proteins were identified by using STRING with a high score. ACE2 expressed highly in the small intestine, testis, and kidney. The level of ACE2 expression in tumor tissues varies in different types of cancers compared with that in normal tissues. It was worth noting that the expression level of ACE2 in the tumor has no effect on patient survival. MiRNA hsa-miR-942-5p, and three transcription factors (TFs) including Signal transducer and activator of transcription 4 (STAT4), Estrogen related receptor α (ESRRA), and Signal transducer and activator of transcription 3 (STAT3) were selected as novel ACE2 regulators. Moreover, nine potential therapeutic drugs were predicted by two online databases. Thus, our research may expand the overall view of ACE2 in COVID-19 treatment.

The metrological performance of FBG strain sensing systems is a critical premise for the precision of plastics water support pipeline structural deformation measurement, but the strain transfer loss of FBG attached on the plastics pipe subjected by dynamic force is unclear. This paper presents the first study on the effects of strain transfer between FBG, and acrylate polymer blended with poly resin (ABR)pipe sheets loaded by static and dynamic force. Theoretical methods of dynamic strain transfer theory combine with the exponentially decaying sinusoidal shock force time course is deduced and various dynamic parameters sensitivities studies are carried out, as well as that of the geometric parameters. The result of the dynamic theory is compared with the calibration test outcomes, while the ASTR of FBG attached on ABR sheet is compared with distributed optical fiber sensors (DOFS) and other pipe materials such as PVC, concrete, and steel. Results show that the ASTR of FBG is more accurate than that of the DOFS, and the grows of ASTR depending on the paste length of FBG, the Young's modulus of the middle materials, the thickness of the middle materials and attenuation coefficient. Paste length produced the largest increase, yet the magnitude and loading speed of the external force has unexpectedly little effect on ASTR. FBG seem low error, insensitive with dynamic force and independent with the material of matrix, and this demonstrates benefits that are stronger across the board than DOFS. This is not currently recognized by standards or by most reported studies.

Engineers make things, make things work, and make things work better and easier. This kind of knowledge is crucial for innovation, and much of the explicit knowledge developed by engineers is embodied in scientific publications. In this paper, we analyze the evolution of publications and citations in Engineering in a middle-income country such as Mexico. Using a database of all Mexican publications in Web of Science from 2004 to 2017, we explore the characteristics of publications that tend to have the greatest impact; this is the highest number of citations. Among the variables studied are the type of collaboration (no collaboration, domestic, bilateral, or multilateral), the number of coauthors and countries, the language of the article, controlling for a coauthor from the USA and the affiliation institution of the Mexican author(s). Our results emphasize the overall importance of joint international efforts and suggest that publications with the highest number of citations are those with multinational collaboration (coauthors from three or more countries), written in English, and when one of the coauthors is from the USA.

In drilling small holes with diameters of 1 mm or less, minute clogging and twining of chips or adhesion of the workpiece material can become factors in causing breakages of the drill bit; moreover, it can be difficult to identify the machining state. Acoustic emission (AE) sensing is a nondestructive inspection technique that measures the elastic-stress waves that are generated when a material is deformed and fractured. AE sensing permits highly sensitive measurements to be made without changing the rigidity of the experimental system, unlike force sensing of cutting resistance, etc. In the present study, attempts were made to identify the machining state and tool wear, and to predict abnormalities in small-diameter drilling by using the change in the frequency of AE signal waveforms arising from deformation and fracture. It was shown that it is possible to predict the breakage of the drill bit by detecting the high-frequency AE signals caused by adhesion. In addition, a correlation map of the AE frequency spectrum for identifying the machining state in a drilling operation is suggested.

Introduction: In Traditional Chinese Medicine (TCM), tongue diagnosis plays an important role. Besides shape, colour and textural attributes of tongue regions have significance due to their association with different organs (viz. heart, lung, kidney-bladder, liver-gallbladder and stomach-spleen) in health and disease. Although numerous quantitative methods have been proposed to reduce inter and intra observer variability in tongue diagnosis, almost all of them considered only global colour/ textural features i.e. from entire body of tongue. In this work, regional colour and texture information of tongue have been analysed for healthy subjects (NOM) and patients suffering from chronic acidity-indigestion (ACD). Methods: Tongue boundaries are marked manually in each image and then tongue bodies are automatically partitioned into five regions linked with said internal organs. Rough assessments of regions’ boundaries are obtained from literature and then they are fine-tuned according to experts’ advice. As boundaries are not well defined, regions near the common boundary of two or more organs, are not assigned to any organ. Several first and second order statistical features based on grey scale intensities and a* values of LAB colour space (indicative of redness) have been extracted from five different regions of tongue images. Intragroup analysis using Wilcoxon signed rank test compared different regions within individual study group. Additionally, intergroup analysis using Wilcoxon rank sum test compared tongues of NOM with ACD for each region separately. Results: Intragroup analysis reveals a* values are statistically different (p&lt;0.01) between stomach-spleen and liver-gallbladder regions for ACD while no significant change of a* are noted between these regions of normal tongue. It was found from intergroup analysis that correlation (one of the second order texture features extracted from grey scale images) of heart region has significantly decreased while correlation of kidney, liver-gallbladder and stomach-spleen regions significantly increased from NOM to ACD. Conclusion: This study sheds light on importance of inclusion of regional textural analysis of tongue in quantitative studies and can be applied to automated tongue diagnosis for other diseases.

The present study aims to analyze scientific production about technological cooperation networks in biotechnology sector, based on bibliometrics network analysis. We used the Gephi software to identify groups of partnerships, proving that the cooperation relationship is a practice used, re-sulting technological development. Findings identify that in the path for new resources that com-plement skills and competences universities are an important player in this cooperative ecosystem, and The United States is a large hub, with an extensive network of global cooperation. A strong role of its researchers in the publication of scientific articles in cooperation is highlighted. This study contributes to the advancement of the discussion about cooperative networks, as well as to the development of policies aimed at the biotechnology sector advancements

Abstract Background: Cluster randomized controlled trials are increasingly becoming popular in public health research interventions and health services research in primary health care design and use in low and middle-income countries. However, the majority of researchers in these trials did not account correctly for the effect of confounders and clustering in the design and analysis stages. Objectives: This article aimed to review the main implications of implementing a cluster randomized controlled trials design in public health research and emphasize the practical application of proper analytical methods and the performance of different statistical models. Methods: The practical application of various analytical methods is validated via the utilization of experimental data from a public health research case study. This article also demonstrated the performance of hierarchical models and made comparisons in terms of empirically precise effect size estimates. Results: Three hierarchical statistical models were provided with highly varied effect sizes during the analysis of the intervention effect on outcome, such as model 1 (AOR: 14.32; 95% CI: 3.75–54.68), model 2 (ARR: 3.52; 95% CI: 2.16–5.77), and model 3 (ARR: 4.79; 95% CI: 2.69–5.52).Conclusion: Inaccurate results and potentially misleading conclusions can arise from improper cluster randomized controlled trial designs and analyses. This article has shown that real-world data can be adjusted for the effects of confounders and clustering, and we advocate for the routine use of suitable design and analytical methods. This article concludes that researchers should be careful when selecting hierarchical models to analyze cluster randomized controlled trials.

Low-intensity noisy galvanic vestibular stimulation (nGVS) can improve static and dynamic postural deficits in patients with bilateral vestibular loss (BVL). In this study, we aimed to explore the neurophysiological and neuroanatomical substrates underlying nGVS treatment effects in a rat model of BVL. Regional brain activation patterns and behavioral responses to repeated 30-min nGVS treatment in comparison to sham stimulation were investigated by serial whole-brain [18F]-FDG-PET measurements and quantitative locomotor assessments before and at 9 consecutive time points up to 60 days after chemical bilateral labyrinthectomy (BL). [18F]-FDG-PET revealed a broad nGVS-induced modulation on regional brain activation patterns encompassing biologically plausible brain networks in the brainstem, cerebellum, multisensory cortex and basal ganglia during the entire observation period post-BL. nGVS broadly reversed brain activity adaptions occurring in the natural course post-BL. Parallel behavioral locomotor assessment demonstrated a beneficial treatment effect of nGVS on sensory-ataxic gait alterations, particularly in the early stage of post-BL recovery. Stimulation-induced locomotor improvements were finally linked to nGVS brain activity responses in the brainstem, hemispheric motor and limbic networks. In conclusion, combined [18F]-FDG-PET and locomotor analysis discloses the potential neurophysiological and neuroanatomical substrates that mediate previously observed therapeutic nGVS effects on postural deficits in patients with BVL.

Keywords: SARS-CoV-2; COVID-19 ; Non Communicable diseases (NCDs). Clinical features; Institucionalized or hospitalized elderly; meta-analisys.

It is well known that the basis of diffraction analysis of matter is scattering, including scattering of ultrashort laser pulses. In the theory of scattering of ultrashort pulses the pulse duration parameter is usually not taken into account, which leads to some error. This error may be more significant than the considered effects in the scattering of the pulse on the studied structure. In this paper it is shown that the pulse duration parameter should be taken into account when scattering X-ray pulses on oriented diamonds with NV-centers. It is shown that the scattering spectra can be used to judge the orientation of NV centers in the diamond structure. The obtained results may be very different from the widely used theory of diffraction analysis, which confirms the necessity of taking into account the pulse duration parameter in the diagnosis of complex structures.

Computer vision is a powerful technology that has enabled solutions in various fields by analyzing visual attributes in images. One field that has taken advantage of computer vision is agricultural automation, which promotes high-quality crop production. The nutritional status of a crop is a crucial factor in determining its productivity. This status is mediated by approximately 14 chemical elements acquired by the plant, and their determination plays a pivotal role in farm management. To address the timely identification of nutritional disorders, this study focuses on the classification of three levels of phosphorus deficiencies through individual leaf analysis. The methodological steps include: (1) generating a database with laboratory-grown maize plants that were induced to total phosphorus deficiency, medium deficiency, and total nutrition, using different capture devices; (2) processing the images with state-of-the-art transfer learning architectures (i.e. VGG16, ResNet50, GoogLeNet, DenseNet201, and MobileNetV2); and (3) evaluating the classification performance of the models using the created database. The results show that the VGG16 model achieves superior performance, with 98% classification accuracy. However, the other studied architectures also demonstrate competitive performance and are considered state-of-the-art automatic leaf deficiency detection tools. The proposed method can be a starting point to fine-tune machine vision-based solutions tailored for real-time monitoring of crop nutritional status.

The basic (region) leucine zippers (bZIPs) are evolutionarily conserved transcription factors widely distributed in eukaryotic organisms. In plants, they are not only involved in growth and development, defense and stress responses, and regulation of physiological processes, but also play a pivotal role in regulating secondary metabolism. To explore the function related to the bZIP gene family in Stevia rebaudiana Bertoni, we identified 105 SrbZIP genes at the genome-wide level and classified into 12 subfamilies using bioinformation methods. Analysis of physicochemical properties showed that the amino acid length readings ranged from 96 aa (SrbZIP13) to 704 aa (SrbZIP17), and the isoelectric point ranged from 4.64 (SrbZIP21) to 10.08 (SrbZIP101). The majority of these proteins (94.29%) were localized in the nucleus. Three main classes of cis-acting elements found in the SrbZIP promoter regions, including development-related elements (CAT-box), defense and stress-responsive elements (LTR/ARE/MBS), and phytohormone respon- sive elements (ABRE/TGACG-mitif/TCA-element). Through protein-protein interac- tion network of 105 SrbZIP proteins, SrbZIP proteins were mainly classified into four major categories: ABF2/ABF4/ABI5 (SrbZIP51/SrbZIP38/SrbZIP7), involved in phy- tohormone signaling, GBF1/GBF3/GBF4 (SrbZIP29/SrbZIP63/SrbZIP60) involved in environmental signaling, AREB3 (SrbZIP88), PAN (SrbZIP12), TGA1 (SrbZIP69), TGA4 (SrbZIP82), TGA7 (SrbZIP31), TGA9 (SrbZIP95), TGA10 (SrbZIP79) and HY5 (SrbZIP96) involved in cryptochrome signaling, and FD (SrbZIP23, SrbZIP24, SrbZIP47, SrbZIP67, SrbZIP68, SrbZIP71, SrbZIP72) promoted flowering. The transcriptomic data showed that SrbZIP genes differentially expressed in six S. rebaudiana cultivars (‘023’, ‘110’, ‘1188’, ‘11-14’, ‘GP’ and ‘GX’). Moreover, the expression levels of selected 15 SrbZIP genes in response to light, abiotic stress (low temperature, salt and drought), phytohormones (methyl jasmonate, gibberellic acid and salicylic acid) treatment and in different tissues were analyzed utilizing qRT-PCR. Six SrbZIP (SrbZIP54, SrbZIP63, SrbZIP32, SrbZIP45, SrbZIP60 and SrbZIP9) genes were further identified to be highly induced by factors affecting glycoside synthesis. Among them, three SrbZIP genes (SrbZIP54, SrbZIP63 and SrbZIP32) were predicted to be related to stress-responsive terpenoid synthesis in S. rebaudiana. The protein-protein interaction network expanded the potential functions of SrbZIP genes. This study firstly provided the comprehensive genome-wide report of the SrbZIP gene family, laying a foundation for further research on evolution, function and regulatory role of bZIP gene family in terpenoid synthesis in S. rebaudiana.

Keywords: Deep mining; Drill bit structural parameters; Fidelity coring; Abaqus simulation and analysis.

Drainage divide is a dynamic feature that migrates in response to tectonic activity. The asymmetric uplift between two adjacent basins causes the divide migration from a slower to faster uplift area. Sado Island, Japan, has been affected by southeastward tilting uplift since ca. 300k years. Despite the faster uplift on the northwest, the main divides have existed on the southeast side of the geometric center of the island, with no other feature suggesting tectonic inversion of the tilting direction. In this study, we conducted a DEM-based investigation that focused on divide migration. A spectrum from very inactive to active divide migration in the northwest. Regardless of their position, actively migrating divides are comprehensible, but inactive divides located in a relatively slow uplift area remain unclear. We concluded that some divides slowed down owing to the local balance of erosion rates across the divides, not implying the balance between uplift and river erosion at the basin scale, reflecting disequilibrium in river longitudinal profiles. The main divides of Sado have presumably continued to slowly migrate toward the faster uplift area; however, they are most likely to have never overcome the moving geometric center owing to land expansion at the seacoast due to asymmetric uplift.

Rapid urbanization has led to many ecological problems such as landscape fragmentation, decreased landscape connectivity, and decreased biodiversity. Building an ecological security pattern is an important way to ensure ecological security and maintain sustainable urban development. Harbin is an important large-scale city in northeastern China, and the urban central district of Harbin is used as the study area. Ecological sensitivity assessment, MSPA, gravity model, landscape connectivity assessment and MCR model were used to extract ecological source areas, ecological corridors and ecological nodes in the study area to construct and optimize the ecological security pattern. Research shows that: A total of 23 ecological source areas were identified, mainly located along the Songhua River in the central part of the study area and in the mountain forest areas within the A-cheng District in the southeastern part of the study area. 48 ecological corridors were extracted, mainly in Daowai District, A-cheng District and the eastern part of Xiangfang District. There are 8 important ecological corridors and 10 important connecting corridors. 61 ecological nodes of the first level and 65 ecological nodes of the second level were extracted. High, higher, medium, lower and low security areas were classified based on the minimum cumulative resistance surface, with the highest proportion of high ecological security areas accounting for 45.75% of the study area. 65 ecological breakpoints were extracted and restoration measures were proposed. Finally, The structure of the ecological security pattern optimization of "two axes, two belts and four areas" is proposed, and corresponding ecological management measures are put forward. The experimental system of this study can provide new ideas for the construction of ecological security patterns in other regions and provide scientific support for the ecological sustainable development of similar urban areas.

Vegetation Net Primary Productivity (NPP) plays a crucial role in terrestrial carbon sinks and the global carbon cycle. Investigating the spatiotemporal evolution and influencing factors in the Yangtze River Delta (YRD) region can furnish a solid scientific foundation for green, low-carbon, and sustainable development in China, as well as a reference for other rapidly urbanizing regions. This study focuses on the YRD region as an illustration and utilizes the Carnegie-Ames-Stanford Approach (CASA model) to quantify NPP in this region from 2000 to 2018. Investigation into the spatiotemporal evolution and influencing factors was conducted using Theil–Sen Median Trend Analysis and Scenario Analysis. The results indicate that (1) the NPP in the YRD region from 2000 to 2018 exhibited pronounced spatial differentiation characteristics, typically exhibiting a spatial distribution pattern of being high in the south and low in the north, high in the west and low in the east. Additionally, the expansion of built-up areas and the reduction of cultivated land have the potential to reduce NPP in the YRD region. Moreover, the influence of LUCC is anticipated to be relatively limited compared to that of climate change. Furthermore, changes in precipitation were found to be positively correlated with changes in NPP, with the effect being relatively more pronounced. The correlation between temperature and NPP demonstrated spatial differentiation, with a mainly positive correlation in the central and southern parts of the YRD and a mainly negative correlation in the northern part. Changes in solar radiation had a negative correlation with changes in NPP. Based on these results, it is recommended that local governments strictly enforce urban development boundaries and manage the disorderly expansion of built-up areas, enhance the regional irrigation infrastructure, and address air pollution, so as to ensure the necessary conditions for the growth of vegetation, reduce greenhouse gas emissions, and control regional temperature rise.

Context and aim: Environmental awareness is the first step to climate change risk perceptions and environmental behaviour. However, this pathway is not always possible within different population segments and trust contexts. This study explores the conditional effect of trust on environmental behaviour in the Zed Generation in Albania. The consideration of the Zed generation due to two opposing traits, such as social courage and anti-social, make them an interesting topic to understand, especially for their importance in online communities. Method: The youth engagement environmental programme and the climate change risk perceptions framework are adopted in an input-output design. Environmental awareness (input) is the initiating factor, and climate change risk perception and community engagement as mediators of environmental behaviour(output). Individual and institutional trust is the moderating factor that inhibits/enhances engagement and environmental behaviour. Results: The moderation-mediation show that climate change risk perceptions did not mediate environmental behaviour. Environmental awareness directly affects it. However, low institutional trust inhibits the general trust that, in turn, lowers the impact of awareness in climate change perceptions and community engagement toward environmental protection. Practical recommendation: The application of the input-output model shows that the pathway that directly affects environmental behaviour among Zed Generation in Albania is not Climate change risk perception. In low-trust contexts, positive environmental behaviour can be generated through community engagement. Policymakers and educational programmes in low-middle-income countries might consider community engagement to mitigate trust issues and effectively deal with environmental problems with a global segment such as the Zed generation.

A deterministic compartment model for the transmission dynamics of onchocerciasis with nonlinear incidence functions in two interacting populations is studied. The model is quantitatively analyzed to investigate it's local asymptotic behavior with respect to disease-free and endemic equilibria. It is shown, using Routh-Hurwitz criteria, that the disease-free equilibrium is locally asymptotically stable when the basic reproduction number is less than the unity. When the reproduction number is greater than the unity, we prove the existence of a locally asymptotically stable endemic equilibrium. Furthermore, bifurcation analysis was done by investigating the possibility of the co-existence of the equilibria of the model at R0<0 but near R0=0 by Center Manifold Theory.

This work promotes new methods in Mathematical Modeling, consisting in the use of the methods of Non-standard Analysis in Topoi, having as its main purpose, the mathematical definitions of the pseudoparticles from the title, with arguments from Biology/Physiology (Mathematical Neuroscience), Physics (String Theory and Emergent Quantum Mechanics), and Cybernetics (Global Brain, including Natural and Artificial Intelligence). The connections between brain and mind will be scketched via the genetic/epigenetic interplay. The topoi model the intuitionistic logic (multi-valued) and have been used in Quantum Physics while Non-Standard Analysis in SET (= the Category of sets) has been applied in Mathematical Economics; topics from Theory of Categories were also used in the study of Consciousness; however, the combination topoi - non-standard analysis was never used until now in Applied Mathematics. Another important objective is to produce progress in this aria of Pure Mathematics also - the build of non-standard analysis in classes of topoi, already used in Physics. We propose the logic of non-standard extensions in topoi as a model of the human thinking (based on infons/receptons), these theories representing new top and very difficult results in Abstract Mathematics either.

The problem of low soil fertility and limited research in agricultural data driven tools, may lead to low crop productivity which makes it imperative to research in applications of high throughput computational algorithms such as of machine learning (ML) for effective soil analysis and fertility status prediction in order to assist in optimal soil fertility management decision-making activities. However, difficulties in the choice of the key soil properties parameters for use in reliable soil nutrients analysis and fertility prediction. Also, individual ML algorithms setbacks and modelling expert implementation procedures subjectivity, may lead to exploitation of worst fertility level targets and soil fertility status targets classification models performance reported variations. This paper surveys state-of-affair in ML for agricultural soil nutrients analysis and fertility status prediction. Prominent soil properties and widely used classical modelling algorithms and procedures are identified. Empirically exploited fertility status target classes are scrutinized, and reported soil fertility prediction model performances are depicted. The three pass method, with mixed method of qualitative content analysis and qualitative simple descriptive statistics were used in this survey. Observably, the frequently used soil nutrients and chemical properties were organic carbon, phosphorus, potassium, and potential Hydrogen, followed by iron, manganese, copper and zinc. Predominant algorithms included Random Forest, and Naïve Bayes, followed by Support Vector Machine. Model performances varied, with highest accuracy 98.93% and 98.15% achieved by ensemble methods, and the least being 60%. Interdisciplinary ML related researchers may consider using ensemble methods to develop high performance soil fertility status prediction models.

As the demand for liquefied petroleum gas (LPG) continues to increase worldwide, more LPG facilities are being constructed. However, the design and manufacture of pressure vessels used to store dangerous liquids or pressurised fluids, such as LPG, has been a major cause of hazards, including explosions and leakage. In this study, we aim to address this issue by designing and analysing a vertical pressure vessel with a capacity of 10 m3 of pressurised LPG in accordance with the American Society of Mechanical Engineers (ASME) code. Safety is the primary concern in designing pressure vessels due to the potential risks posed by accidents. Therefore, the main objective of this project is to design a pressure vessel that is safe from failure. The vessel is cylindrical with two elliptical heads, two nozzles, a manway and four leg supports, and we used Autodesk Inventor Professional 2023 for geometric modelling and Inventor Nastran for FEA analysis. To investigate the displacements, deflections and Von-Mises stresses in the pressure vessel, we used the finite element method, and Autodesk Inventor Nastran was employed for the analysis. Our results showed that changes to the structure of the pressure vessel were needed to reduce stress in the structure. Specifically, the displacement showed an inverse relationship with the tank section shell thickness. Moreover, we observed that the factor of safety increased linearly with shell thickness. We carefully considered permissible pressures and determined the required wall thickness to ensure acceptable maximum stresses. Our results indicate that the design is safe from failure, and the highest stresses are experienced by the manway followed by the shell, while the heads, nozzles and legs support experienced the lowest stresses. We also performed a theoretical calculation for the entire model and checked the results to ensure they were within the acceptable limits. In summary, our study highlights the importance of designing pressure vessels in accordance with ASME codes to ensure safety and prevent hazards caused by improper design and manufacturing. By using the finite element method, we identified potential stress points in the pressure vessel and were able to make modifications to improve its safety.

Observing customers is one of the methods to uncover their needs. By closely observing how customers use products, we can indirectly experience their interactions and gain a deep understanding of their feelings and preferences. Through this process, companies can design new products that have the potential to succeed in the market. However, traditional methods of customer observation are time-consuming and labor-intensive. In this study, we propose a method that leverages the analysis of online customer reviews as a substitute for direct customer observations. By correlating Customer Journey Map (CJM) with online reviews, this research establishes a verb-centric analysis that produces a CJM based on online review data. Various Text analysis techniques were utilized in this process. Through empirical data analysis, we validated that indirect observation based on customer reviews can be performed more efficiently than traditional methods. Additionally, we observed that the customer behavior VOC (Voice of Customer) identified during the CJM mapping process offers unique insights that are distinct from traditional product feature-centric review analyses. To verify the usefulness of these behavior VOC, we evaluated the quantitative analysis results of the same reviews through product development experts. Experts recognized these customer behavior VOC as useful information for developing new products.

This review focuses on developments that quantify grain quality with a range of spectral sensors in an on-farm setting. If the application of sensor technologies were expanded and adopted on-farm, growers could identify the impact and manage the harvesting operation to meet a range of quality targets and provide an economic advantage to the farming enterprise.

The development of numerical simulations is potentially useful in predicting the most suitable manufacturing process and ultimately improving product quality. Seamless pipes are manufactured by rotary piercing process in which round bars are fed between two rolls and pierced by a stationary plug. During this process, the material undergoes severe deformation which renders it impractical to be modelled and analysed with conventional finite element methods. In this paper, three dimensional numerical simulations of the piercing process are performed with Arbitrary Lagrangian-Eulerian (ALE) Formulation in LS DYNA software. Details about the material model as well as the elements formulations are elaborated here and mesh sensitivity analysis was performed. The results of the numerical simulations are in good agreement with experimental data found in the literature and the validity of the analysis method is confirmed. The effects of varying workpiece velocity, process temperature, and wall thickness on the maximum stress levels of the product material/pipes are investigated by performing simulations of sixty scenarios. Three dimensional surface plots are generated which can be utilized to predict the maximum stress value at any given combination of the three parameters.

Censoring occurs when complete follow-up time information is unavailable for patients enrolled in a clinical study. The process is considered to be informative (nonignorable) if the likelihood function for the censoring model cannot be partitioned into a set of response parameters that are independent of the censoring parameters. In such cases, estimated survival time probabilities may be biased, prompting the need for special statistical methods to remedy the situation. The problem is especially salient when censoring is skewed toward the early phase of a study. In this paper, we describe a method to impute censored follow-up times using a counting process method.

Seeds can maintain their quality for a limited time; after that, they will lose their germination ability and vigor. Some physiological and physicochemical changes in the structure of the seeds during storage can decrease the quality of the seeds which is known as aging. Therefore, detection of the strong young seeds from the old ones is a vital issue in the modern agriculture. Conventional methods of detection of the seed viability and germination are destructive, time-consuming and costly. In this research, two peanut cultivars, namely North Carolina 2 (NC-2) and Florispan were selected and three artificial aging levels were induced to them. Hyperspectral images (HSI) of the samples were acquired and the seed viability was evaluated using two pre-trained convolutional neural network (CNN) image processing models, AlexNet and VGGNet. The noise of the reflection spectra of the samples was relatively resolved and modified by combining Preprocessing techniques of moving average (MA) and standard normal variate (SNV). Using principal component analysis (PCA), the dimensions were declined and three principal components (PC) were extracted. These PCs were then used as variables in the classification of support vector machine (SVM) and linear discriminant analysis (LDA). The results showed the high capability of CNN architectures such as AlexNet and VGGNet in detection of the seed viability based on the HIS with no pre-processing and feature extraction. The mentioned architectures reached the accuracy of 0.985 and 0.986, respectively. The combination of feature extraction method of PCA with LDA and SVM classifiers showed that the use of a limited number of PCs instead of all wavelengths can decrease the complexity of modeling, while enhancing the efficiency of the models such that LDA and SVM classifiers achieved the accuracy of 0.983 and 0.986 in classification of peanut sees, respectively.

Individual investors often struggle to predict stock prices due to the limitations imposed by the computational capacities of personal laptop Graphics Processing Units (GPUs) when running intensive deep learning models. This study proposes solving these GPU constraints by integrating deep learning models with technical analysis methods. This integration significantly reduces analysis time and equips individual investors with the ability to identify stocks that may yield potential gains or losses in an efficient manner. Thus, a comprehensive buy and sell algorithm, compatible with average laptop GPU performance, is introduced in the study. This algorithm offers a lightweight analysis method that emphasizes factors identified by technical analysis methods, thereby providing a more accessible and efficient approach for individual investors. To evaluate the efficacy of this approach, we analyzed the performance of eight deep learning models: LSTM (4 layers), CNN, BiLSTM (4 layers), CNN Attention, BiGRU CNN BiLSTM Attention, BiLSTM Attention CNN, CNN BiLSTM Attention, and CNN Attention BiLSTM. These models were used to predict stock prices for Samsung Electronics and Celltrion Healthcare. The CNN Attention BiLSTM model displayed superior performance among these models, with the lowest validation mean absolute error value. In addition, an experiment was conducted using WandB Sweep to determine the optimal hyperparameters for four individual hybrid models. These optimal parameters were then implemented in each model to validate their back-testing rate of return. The CNN Attention BiLSTM hybrid model emerged as the highest-performing model, achieving an approximate rate of return of 5 percent. Overall, this study offers valuable insights into the performance of various deep learning and hybrid models in predicting stock prices. These findings can assist individual investors in selecting appropriate models that align with their investment strategies, thereby increasing their likelihood of success in the stock market.

Cervical cancer is a significant global health concern, with human papillomavirus (HPV) infection being a crucial risk factor. Photodynamic therapy (PDT) is an attractive, minimally invasive treatment for HPV-related cervical lesions, which uses photosensitizers and light to selectively de-stroy abnormal cells. We aim to provide an overview of the various sorts of dyes that are utilized in PDT for decreasing the incidence and mortality of cervical cancer. Besides, the article discusses ongoing clinical trials for PDT in low-grade squamous intraepithelial neoplasia (LSIL) and high-grade squamous intraepithelial lesions (HSIL), as well as preclinical approaches for PDT in cervical cancer using various dyes. Moreover, it highlights potential dyes for PDT, examine them in in-silico condition, their pros and cons and also the solutions for enhancing their anticancer com-patibility. We also display that PDT is a promising therapeutic strategy for the diagnosis and treatment of HPV-associated cervical lesions. Moreover, it shows that using different classes of dyes improves the anticancer effects of PDT. Finally, among all dyes which are used in PDT, Fullerene demonstrated high tendency to over expressed receptors in cervical cancer cells and seems to be a proper candidate for be used in PDT more than before, but further research is necessary to assess its long-term efficacy and safety.

Platelet-activating factor (PAF) is a phospholipid-derived inflammatory mediator, triggering various inflammatory conditions, including eosinophil activation and recruitment. Despite the unclear mechanism underlying the formation and maintenance of nasal polyp in chronic rhinosinusitis with nasal polyps (CRSwNP), there is strongly indication of its association with type 2 inflammation. This study aimed to quantify PAF-associated gene expression, examining enzymes involved in PAF synthesis (lysophosphatidylcholine acyltransferase 1 (LPCAT1), LPCAT2, LPCAT3, and LPCAT4), and PAF degradation (PAF acetylhydrolases 1 B2 (PAFAH1B2), PAFAH1B3, and PAF acetylhydrolases 2 (PAFAH2)), and PAF receptor (PTAFR). Transcriptomic analysis encompassed CRSwNP, including eosinophilic CRS (ECRS) (n=9), nonECRS (n=8), and a subgroup of ECRS with aspirin exacerbated respiratory disease (Asp) (n=3) based on the Japanese Epidemiological Survey of Refractory Eosinophilic Chronic Rhinosinusitis (JESREC) criteria. Gene expression profiles from nasal polyps in CRSwNP patients and the uncinate process in normal subjects (controls) (n=6) were analyzed using bulk RNA barcoding and sequencing (BRB-seq). Hierarchal analysis, utilizing the average linkage method with iDEP1.1, clarified the relationship between Differentially Expressed Genes (DEG) expressions and cluster formation. Two clusters (cluster 1 (n=11) and cluster 2 (n=9)) of CRSwNP divided by hierarchal analysis showed distinct gene expression profiles in the specific pathway of “cytokine-cytokine receptor interaction” in KEGG pathway and upregulated type 2 inflammatory gene expression in cluster 2. In CRSwNP subclassification of ECRS, nonECRS, and Ctrl, PTAFR was only upregulated in ECRS and nonECRS. In cluster analysis, cluster 1 showed significant downregulation of LPCAT2 and upregulation of PTAFR expression, while cluster 2 showed significant upregulation of LPCAT1, PAFAH1B2, and PTAFR and downregulation of PAFAH2 expression. These findings suggest that cluster 2, characterized by severe type 2 inflammatory gene expression, manifest a prominent PAF-associated pathophysiology. Understanding this high PAF-associated pathophysiology in cluster 2 could provide valuable insights into the treatment and management of CRSwNP.

In this article, we estimate the value of Government Expenditure on Education-GEE in the context of Environmental, Social and Governance-ESG dataset of the World Bank. We use data from 193 countries in the period 2011-2020. We use Panel Data with Fixed Effects, Panel Data with Random Effects, Pooled Ordinary Least Squares-OLS, and Weighted Least Squares-WLS. Our results show that the value of GEE is positively associated among others to “Case of Death, by communicable disease and maternal, prenatal and nutrition conditions”, and “Unemployment”, and negatively associated among others to “Hospital Beds” and “Government Effectiveness”. Furthermore, we apply the k-Means algorithm optimized with the Elbow Method and we find the presence of four clusters. Finally, we confront eight machine learning algorithms for the prediction of the future value of GEE. We found that the Polynomial Regression is the best predictive algorithm. The Polynomial Regression predicts an increase in GEE of 7.09% on average for the analysed countries.

This research aims to produce a network structure in the Integrated Urban Farming Program in Bandung City to map the policy actors involved in it as an effort to support food security in the city. This research uses a mixed method with an exploratory sequential strategy involving policy actors from the government, private sector, academia, community, and mass media. To obtain the network structure in integrated urban farming to determine the most important actors, this research uses a social network analysis approach by utilizing the Gephi application. The network structure is based on four dimensions, namely centrality. The results of this study confirm that the actor who has the most connections (degree centrality), as well as the one who holds the best communication control (betweenness centrality), is Parahyangan Catholic University (Academic). While the actor who plays the most important role (eigenvector) is at the lower level of the government Sub-District and Urban Village. This research is useful for explaining the importance of the position of actors in the urban agriculture policy network which is the key to the success of a program.

Researchers are concerned about the impact of fake news on democracy, while it could also escalate to life-threatening problems. Fake news continues to spread, so does people's behaviour and emotions about fake news via social media. This opens up the back door for cyber-criminals to entice people (i.e. taking advantage of victims' emotional and behavioural aspects) to click on fraudulent links (e.g. phishing links) associated with fake news when reading. Therefore, we investigate how people's emotional and behavioural features influence reading and diffusing fake news on social media. We proposed a classification model incorporating people's behavioural features and their emotions to better detect fake news in social media. Our results reveal that fake news has more negative emotions than legitimate ones and both title and the content of the news/posts are equally important. Furthermore, we have identified that there exist strong correlations between some of the behavioural and emotional features. Finally, we concluded that emotional and behavioural features are important for fake news classifications as they improve the accuracy of detecting fake news, and the findings of our study can ultimately be used to develop a risk score prediction model for fake news in social media.

Shrinking farm size and fragile farm resources pose a significant challenge to the sustainability of small-scale farms. Efficient resource utilization in small-scale farms is crucial to achieving farm sustainability through endogenous mechanisms. However, the precise mechanisms to integrate physical resources to achieve farm sustainability are not very clear yet. By capturing the interaction among farm resources as a network phenomenon, we identify the discrete resource interactions (RIs) in different types of small-scale farms of Indian Sundarbans, which are associated with higher farm sustainability. Thirty-two linkages, 11 reciprocal linkages, 22 triads, and three ‘core elements’ that occurred and cooccurred on highly sustainable farms are found to be critical in achieving farm sustainability. Using the properties of resource interaction networks as explanators of farm sustainability, we anticipate that sustainability in small-scale farms can be achieved by strategically creating new RIs on the farm. However, there may be limitations to such achievement depending on the nature of RI and type of farm. The analytical approach helps to understand the structural basis of sustainability in small-scale farms, and this approach can be used to achieve farm sustainability through the strategic integration of existing farm resources in the smallholder systems.

This paper proposed a time two-mesh (TT-M) finite difference numerical scheme to improve the efficiency of solving the symmetric regularized long wave (SRLW) equation. The TT-M Crank-Nicolson discretization and finite difference method are employed in time and space approximation respectively. The scheme involves three main steps: firstly, the time interval is divided into coarse and fine time meshes, then the nonlinear system is solved on the coarse time mesh; secondly, coarse numerical solutions on the fine time mesh are computed using an interpolation formula based on the solutions derived in the step one; lastly, the TT-M finite difference numerical solutions can be obtained through constructing the linearized fine time mesh system using Taylor’s formula. Compared to the currently existing TT-M numerical methods, the novelty of this study is that the nonlinear term including derivatives is linearized by Taylor’s formula for a function with three variables, whose error analysis is more complex. Finally, some numerical examples, including computational time and accuracy, preservation of conservation laws, are given to verify the efficiency of the scheme. By comparing it with the standard nonlinear finite difference scheme, this method can reduce CPU time without sacrificing accuracy.

This review article delves into the pivotal role of DNA in advancing criminal investigations, presenting a comprehensive analysis of its impact on modern justice systems. DNA, as the genetic blueprint of individuals, has revolutionized forensic science, augmenting the accuracy and reliability of criminal investigations. This study explores the historical evolution of DNA analysis, from its initial discovery to the development of sophisticated techniques like polymerase chain reaction (PCR), short tandem repeat (STR) profiling, and next-generation sequencing (NGS). The article elucidates the intricate process of DNA collection, preservation, and analysis, highlighting its significance in establishing identity, proving guilt or innocence, and resolving cold cases. The utilization of DNA databases and international cooperation in cross-border investigations are also examined, emphasizing their contributions to solving complex criminal cases. Moreover, the ethical, legal, and privacy considerations surrounding DNA usage in criminal justice are critically evaluated. Through a comprehensive literature review, this article synthesizes empirical evidence showcasing how DNA evidence has exonerated wrongfully convicted individuals and provided closure to victims' families. It further elucidates how technological advancements have extended DNA analysis to trace evidence, touch DNA, and forensic genealogy, thereby broadening its application in criminal investigations.

This study aimed to detect picobirnavirus (PBV) in the fecal samples of wild and domestic animals from 2014 to 2016 in the Amazon biome. Fecal samples from different animals, including birds (n=41) and mammals (n=217) were used. The PAGE test showed negativity for PBV. However, 32 samples (12.4%, 32/258) showed positive results in RT-PCR analyses. Among the positive sam-ples, pigs and cats, both with 28.12% (9/32), registered the highest frequencies. In phylogenetic analysis, eight sequences from positive samples grouped in the Genogroup 1 of PBV (PBV GI). PBV occurrence was significantly related to cats and pigs, but not other mammals or birds, in-dependently of their geographical origin. Nucleotide analysis demonstrated similarity among the feline group, but the absence of a defined structure between the clades. PBVs are highly wide-spread viruses that can affect the most diverse types of hosts in the Amazon biome, including humans.

Background: Multifunctional nanoparticles are known for their wide range of biomedical applications. Controlling the magnetic properties of these nanoparticles is imperative for various applications, including therapeutic angiogenesis. The study was performed to evaluate the magnetic properties and their control mechanisms by the external magnetic field. Methods: A 100nm magnetic nanoparticle was placed in the magnetic field, and parametrically the magnet field strength and distance was evaluated. Various models of magnetic strength and disposition were evaluated. Magnetic flux density, force/weight, and magnetic gradient strength were the parameters evaluated in electromagnetic computational software. Results: The seven-coil method with three centrally placed coils as Halbach array, and each coil with a flux density of 7 Tesla, and with a coil dimension of 20cmx20cm (square model) of each coil showed a good magnetic strength and force/weight parameters in a distance of 15cm from the centrally placed coil. The particles were then evaluated for their motion characteristics in saline. It showed good displacement and acceleration properties. After that, the particles were theoretically assessed in a similar mathematical model after parametrically correcting the drag force. After application of high drag forces, the particles showed adequate motion characteristics. When the particle size was reduced further, the motion characteristics were preserved even with high drag forces. Conclusion: There is potential for a novel method of controlling multifunctional magnetic nanoparticles using high magnetic fields. Further studies are required to evaluate the motion characteristics of these particles in-vivo and invitro.

Background: Gut-Brain-Axis provides bidirectional communicational route; imbalance of which can have pathophysiological consequences. It is a frontier in autism research, affects 85% of autistic children (NIH report). Their microbiome has few overall microbes and smaller number of health promising microbes than their neurotypical peers. We hypothesize autism gut might play a role in manifestation of autism behaviours and on treatment, can revert back to normal behaviour considerably. The aim is to better understand to what degree gut microbiota of autism subjects differs from controls and identify bacterial species present exclusively in autism. Materials and Methods: 16s-rRNA-sequence of autism-subjects were retrieved from the American Gut Project Archive. Taxonomic assignment was inferred by similarity based methods using Quantitative Insights Into Microbial Ecology (QIIME). Species abundance was characterized and co-occurrence network was built to infer species interaction using measures of diversity. Statistical parameters were considered to validate the findings. Result: A total of 206 (1.8%) of American Gut Project datasets onstituted of autistic samples. Various bacteria such as Akkermansia sp., and Prevotella sp., were harboured in higher abundance in autistic children with statistical significance than in controls. Conclusion: These findings indicate connecting-link between gut-microbiome-brain-axis and autistic behaviour which can result in improved management

Variable-DOF (or kinematotropic) mechanisms are a class of reconfigurable mechanisms. The number of variable-DOF multi-loop planar mechanisms proposed so far is very limited. This paper proposes a novel 8-link variable-DOF planar mechanism with five motion modes. Firstly, a description of the 8-link variable-DOF planar mechanism is presented. Reconfiguration analysis of the 8-link mechanism is then carried out using an elimination and algebraic geometry hybrid approach. The analysis shows that the 8-link mechanism has one 2-DOF motion mode and four 1-DOF motion modes and can switch among three motion modes at four transition configurations and between two motion modes at the remaining four transition configurations. Geometric characteristics of the mechanism in different motion modes are also revealed. Unlike the variable-DOF planar mechanisms found in literature, the proposed 8-link mechanism has two inactive joints in one of its 1-DOF motion modes, and both 4R kinematic sub-chains of the mechanism must appear as parallelograms in a pair or anti-parallelograms in a pair in the same motion mode. As a by-product, a method for factoring trigonometric functions in two angles is proposed.

Globally, increasing rates of obesity are one of the most important health issues. The association between breakfast skipping and body weight is contradictory between cross-sectional and interventional studies. The systematic review and meta-analyses aim to summarize this association based on observational longitudinal studies. We included prospective studies on breakfast skipping and overweight/obesity or weight change in adults. Literature was searched until September 2020 in PubMed and Web of Science. Summary RRs with a 95% CI were estimated in pairwise meta-analyses by applying a random-effects model. In total, 9 studies were included in the systematic review and 6 of them were included in the meta-analyses. The meta-analysis indicated an 13% increased RR for overweight/obesity when breakfast was skipped on ≥ 3 days per week compared to ≤ 2 days per week (95% CI: 1.06, 1.21, n=3 studies). The meta-analysis on weight change displays a 21% increased RR for weight gain for breakfast skippers compared to breakfast eaters (95% CI: 1.05, 1.40, n=2 studies). The meta-analysis on BMI change displayed no difference between breakfast skipping and eating (RR=1.02, 95% CI: 0.99, 1.05, n=2 studies). This study provides low meta-evidence for an increased risk for overweight/obesity and weight gain for breakfast skipping.

The global focus on geopolymer binder production has increased due to the adoption of waste materials and industrial byproducts. Given the gradual decline of the availability of fly ash and ground granular blast furnace slag (GGBFS) resulting from the decarbonization process in electricity and steel productions, waste clay brick powder (WCBP), could be a viable substitute of these pozzolanic by-products. This research is dedicated to thoroughly investigate the techno-eco-efficiency performance of WCBP when utilized as a geopolymer precursor. The favorable mechanical characteristics exhibited by fly ash-GGBFS-WCBP-based geopolymer binder emphasize the importance of assessing its sustainability alongside its technical viability. The study employed life cycle analysis (LCA), following ISO 14040-44 standards, and using the Simapro software, to evaluate the environmental implications of the use of WCBP-based geopolymer mixtures. Human toxicity emerged as the primary impact. Moreover, the analysis of life cycle costs highlighted key financial factors, with around 65-70% attributed to alkaline activators of the total cost. The production of alkaline activators was identified as a critical point for both environmental impact and economic considerations due to energy consumption. While WCBP-rich samples exhibit a 1.7-0.7% higher environmental impact compared to the control mix (CM), their high mechanical strength and cost-effectiveness make them technologically and economically efficient geopolymer mixes. In conclusion, the portfolio analysis for techno-eco-efficiency affirms that mixes containing 40%, 30%, and 20% WCBP are more efficient than those using 10% and 0% WCBP, respectively.

Increasing groundwater levels (GWL) may become one of the most serious issues for Odessa City, Ukraine. This study investigated the spatial distribution characteristics and multifractal scaling behaviour of groundwater level/depth fluctuation for a Quaternary aquifer in Odessa City using a geostatistical approach and a Multifractal Detrended Fluctuation Analysis (MF-DFA). These two methods were applied to monthly GWL fluctuation time series from 1970 to 2020 to monitor 72 hydrogeological wells situated in different parts of Odessa City. The spatial distribution of GWL revealed an overall trend of decline and recovery from 1970 to 2020 in the study area, except for most of the southern region, where a persistent recovery of groundwater depth was observed. The MF-DFA results suggest that the dynamics of GWL fluctuations have multifractal characteristics in the Odessa City area. In addition, both long-range correlation and fat-tail probability distribution contribute to multifractality. However, long-range correlations among fluctuations made a major contribution to the observed multifractality of the GWL fluctuations time series. The generalized Hurst exponent shows a wide range of change (0.20 &lt; h(q) &lt; 2.85), indicating the sensitivity of GWL fluctuations to changes in small scale factors and large-scale factors. Regarding the long range correlations of GWL depth, the Hurst exponents (q = 2) demonstrated the positive persistence of groundwater depth recovery in the southern region and the persistence of groundwater depth variation in the other regions of the study area. The dynamic changes in GWL depth in the Odessa City area may be affected by both natural structural and anthropogenic factors.

Urinary tract infections are among the most frequent infectious diseases and require screening of a great amount of urine samples from patients. However, a high percentage of samples results as negative after urine culture plate test (CPT), demanding a simple and fast preliminary technique to screen out the negative samples. We propose a digital holographic microscopy (DHM) method to inspect fresh urine samples flowing in a glass capillary for 3 minutes, recording holograms at 2 frames per second. After digital reconstruction, bacteria, white and red blood cells, epithelial cells and crystals were identified and counted and the samples were classified as negative or positive according to clinical cutoff values. Taking CPT as reference, we processed 180 urine samples and compared the results with those of urine flow cytometry (UFC). Using standard evaluation metrics for our screening test, we found similar performance for DHM and UFC, indicating DHM as a suitable and fast screening technique retaining several advantages. As a benefit of DHM, the technique is label-free and does not require sample preparation. Moreover, the phase and amplitude images of the cells and other particles present in urine are digitally recorded and can serve for further investigation afterwards.

Nucleoid-associated proteins (NAPs) play an architectural role by bending, bridging, and wrapping the DNA along with a regulatory role of controlling various transcriptional units in the cell. Previews reviews have highlighted the role of HU and its paralog IHF plays in intracellular function as a transcriptional regulator, nucleoid bending protein and sometimes also moonlights in other functions. This review highlights along with the canonical functions of HU and IHF which affects genes responsible for translational machineries, cell wall biosynthesis, aerobic respiration and virulence ; other non-canonical roles which HU plays outside the cellular milieu, notably in acting as an adhesin and playing role in host-cell adhesion, its role in biofilm architecture and its association with cationic low complexity region, resembling histone like H1 proteins. HU and IHF thus has evolved as a hub protein performing a vast type of functions which makes it a important drug target for antibacterial therapy.

This study reports multivariate statistical techniques applied including cluster analysis to evaluate and classify the river pollution level in Taiwan, and principal component analysis-multiple linear regression (PCA-MLR) to identify the possible pollution source. Water quality and heavy metal monitoring data from Taiwan Environmental Protection Administration (EPA) was evaluated for 14 rivers in the four regions of Taiwan. The Erren River was classified as the most polluted River in Taiwan. Biochemical oxygen demand, ammonia, and total phosphate concentration in this river were the highest of the 14 rivers evaluated. In addition, heavy metal levels of the following rivers exceeded the Taiwan EPA standard limit: lead - in the Dongshan, Jhuoshuei, and Xinhuwei Rivers; copper - in the Dahan, Laojie, and Erren Rivers; and manganese - in all rivers. Water pollution in the Erren River was estimated to originate 72% from industrial sources, 16% from domestic black water, and 12% from natural sources and runoff from other tributaries. Our research showed that PCA-MLR and the cluster analysis model accomplished our study objectives and will be helpful tools to evaluate water quality in rivers and we suggest that the continuous monitoring should be conducted to monitor water pollution from anthropogenic activities.

Electric Vehicles (EVs) are increasing the interdependence of transportation policies and the electricity market. EMMEV (Electricity Market Model with Electric Vehicles) is an experimental agent-based model that analyses how carbon reduction policy in transportation may increase number of Electric Vehicles and how does that would influence on the electricity price. Agents are ESCOs (Energy Service Providers) which can distribute fuels and their objective is to maximize their profit. In this paper, EMMEV is used to analyze the impacts of the LCFS (Low Carbon Fuel Standard), a performance-based policy instrument, on electricity prices and EV sales. The agents in EMMEV/regulated parties in LCFS should meet a certain CI (Carbon Intensity) target for their distributed fuel. In case, they cannot meet the target, they should buy credit to compensate for their shortfall and if they exceed, they can sell their excess. The results, considering the assumptions and limitations of the model, show that the banking strategy of the agents contributing in the LCFS might have negative impact on penetration of EVs, unless there is a regular Credit Clearance to trade credits. It is also shown that the electricity price as result of implementing the LCFS and increasing number of EVs has increased between 2–3 percent depending on banking strategy.

With the increasing demand for precise condition monitoring and diagnosis of gas-insulated switchgears (GIS), it has become a challenge to improve the detection sensitivity of partial discharge (PD) induced in the GIS spacer. This paper deals with the elimination of the capacitive component from the phase resolved partial discharge (PRPD) signal generated in GIS spacer based on the discrete wavelet transform. Three types of typical insulation defects were simulated using PD cells. The single PD pulses were detected and were further used to determine the optimal mother wavelet. As a result, the bior6.8 was selected to decompose the PD signal into 8 levels and the signal energy at each level was calculated. The decomposed components related with capacitive disturbance were discarded whereas those associated with PD were de-noised by a threshold and a thresholding function. Finally, the PRPD signals were reconstructed using the de-noised components.

It is found in this paper that ILR-RPCA-back CLR has two problems when dealing with the closure effect of geochemical data. (1) After ilr transformation, RPCA is used for processing. It can be seen from the double-plot diagram that the first principal component and the second principal component transform with the element sequence transformation, and the unique principal component cannot be calculated; (2) the score and the load are transformed into the CLR space through the U matrix. According to the formula CLR=ALR·U, the score result can correspond to the original order of elements. However, the load result obtained by the use of this formula cannot correspond to the original order of elements, and the result can only be obtained through the formula” CLR=UT·ALR”. In order to obtain the best element assemblage of porphyry copper deposit, this paper adopted the mineral assemblage of discovered deposits in Gangdese metallogenic belt for statistical analysis, and obtained that the element assemblage of porphyry copper deposit was Cu, Mo, Au, Ag, W, Bi. Then, by analyzing the singularities of the composite elements, the spatial overlay of the combined element is carried out, and C-A fractal filtering is applied to identify the anomaly and background. In order to facilitate comparison, the different minerals and ore deposit types have been analyzed, the results show that (1) in view of the porphyry copper deposits, recognition effect of combination elements are better than which single element, (2) skarn type copper deposit that it has nothing to do with the porphyry had a high degree of difference, but skarn type copper deposit related to the porphyry had a low degree of difference, (3) This method has a certain advantage over the single element method in porphyry gold deposits, and it can reduce the level of anomalies. Such an advantage is that in the aspect of anomaly evaluation of porphyry copper deposits, the level is reduced at the initial stage of evaluation to reduce the investment in such anomalies, (4) This method has limited ability to distinguish porphyry copper deposit from porphyry molybdenum deposit.

Financial statement analysis is an analysis that uses analytical procedures to evaluate a company's financial health, risks, performance, and future growth potential. This article aims to find out the application of analysis of financial statements of PT. Astra Internasional, Tbk towards the decision-making of novice investors in the Indonesian capital market. This article is qualitative descriptive with literature studies. The results of this article can be concluded that the analysis of the financial statements of PT. Astra Internasional, Tbk can help novice investors in the Indonesian capital market in making investment decisions.

The Sei Dareh Bridge is a cable-stayed bridge located in West Sumatra Province, Indonesia. The bridge, which crosses the Batanghari River, has a main span of 123 meters long and 9 meters wide. Traffic load is transmitted through 24 prestressed cables to a 42.4-meter-high pylon made of concrete. The bridge deck and traffic loads are directly supported by steel box girders as main beams that are reinforced laterally with cross beams IWF 800.300.16.24 and stringers IWF 350.350.12.19. This paper discusses static and dynamic testing on the bridge which aims to assess its feasibility before it is opened to the public. Based on the test, it was concluded that a static load of 73% could not be achieved because the deflection that occurred was beyond the allowable deflection. This is exacerbated by a loud clanging sound on the ST2-X1 prestressed cable when loading to 240 tons or 58% of the targeted load. In addition, this bridge is included in the "lazy bridge" category because it takes 24 hours to return to an undeformed condition after loading. As a recommendation for this bridge, it is necessary to carry out a structural health monitoring system (SHMS) regularly on bridge slabs and cables.

This paper presents a comprehensive analysis of the scholarly footprint of ChatGPT, an AI language model, using bibliometric and scientometric methods. The study aims to understand the evolution of research output, citation patterns, collaborative networks, application domains, and future research directions related to ChatGPT. By analyzing data from the Scopus database, 533 relevant articles were identified for analysis. The findings reveal the prominent publication venues, influential authors, and countries contributing to ChatGPT research. Collaborative networks among researchers and institutions are visualized, highlighting patterns of co-authorship. The application domains of ChatGPT, such as customer support and content generation, are examined. Moreover, the study identifies emerging keywords and potential research areas for future exploration. The methodology employed includes data extraction, bibliometric analysis using various indicators, and visualization techniques such as Sankey diagrams. The analysis provides valuable insights into ChatGPT's influence in academia and offers researchers guidance for further advancements. This study stimulates discussions, collaborations and innovations to enhance ChatGPT's capabilities and impact across domains.

Data that have been processed to allow analysis with a minimum of additional user effort are often referred to as Analysis Ready Data (ARD). The ability to perform large scale Landsat analysis relies on the ability to access observations that are geometrically and radiometrically consistent, and have had non-target features (clouds) and poor quality observations flagged so that they can be excluded. The United States Geological Survey (USGS) has processed all of the Landsat 4 and 5 Thematic Mapper (TM), Landsat 7 Enhanced Thematic Mapper Plus (ETM+), Landsat 8 Operational Land Imager (OLI) and Thermal Infrared Sensor (TIRS) archive over the conterminous United States (CONUS), Alaska, and Hawaii, into Landsat ARD. The ARD are available to significantly reduce the burden of pre-processing on users of Landsat data. Provision of pre-prepared ARD is intended to make it easier for users to produce Landsat-based maps of land cover and land-cover change and other derived geophysical and biophysical products. The ARD are provided as tiled, georegistered, top of atmosphere and atmospherically corrected products defined in a common equal area projection, accompanied by spatially explicit quality assessment information, and

The sublimation enthalpies of four highly energetic materials (HEMs): triacetone triperoxide (TATP), 2,4-dinitrotoluene (DNT), 2,4,6-trinitrotoluene (TNT) and 1,3,5-trinitrohexahydro-s-triazine (RDX) deposited on stainless steel (SS) substrates were determined by optical fibre coupled-grazing angle probe (GAP) FTIR spectroscopy and thermogravimetric analysis (TGA) for bulk crystaline HEMs samples. The desorption energy of RDX on SS was also studied using grazing angle FTIR microscopy. Metastable phases of 2,4-DNT and TNT were observed when deposited on SS, and their sublimation enthalpies values were obtained by GAP measurements and compared with those for the crystalline phases. The sublimation enthalpies for the alpha phase RDX was also determined by TGA measurements. A layer of crystalline beta phase RDX was observed on SS, and it's sublimation enthalpies was determinate by GAP. PLS calibration curves for the surface concentrations of RDX on SS were generated using GAP to determinate the surface concentration with time at different temperatures.

Background: Neuroendocrine tumors (NET) are a rare group of epithelial neoplasm present in gastrointestinal tract (GI) (67.5%), bronchopulmonary tree (25.3-30%), and in 15% of cases, the primary sites cannot be identified. Although endoscopic screening, improvement in pathological techniques, and early detection have shown improvement in NET survival rates, the prognosis of advanced, metastatic, and poorly differentiated NET is very poor. In this study, we aimed to evaluate the effect of Gastrointestinal and pancreatic (GEPs) NETs grade on overall survival. Method: We searched observational studies describing the overall survival or prognostic factors of primary GEP NETs from May 2011 -May 2021 following PRISMA guidelines. Studies describing the effect of primary grade 3 GEP NETs on overall survival were included. Meta-analysis was performed, and pooled hazard ratio and their 95% confidence interval (95% CI) were obtained. The forest plots were created using random-effects models and sensitivity analysis was performed to account for the heterogeneity. Results: Seven studies with 7692 confirmed patients were included. In our meta-analysis grade 3 GEP NET were associated with higher odds of poor survival (pooled HR: 2.73; 95% CI: 1.36–5.47; p = 0.005), with 92% heterogeneity between studies (p < 0.0001). To account for heterogeneity, sensitivity analysis was performed by removing two outlying studies (Fathi et al. and Foubert et al.) on funnel plots. The results after sensitivity analysis did not change and still showed significant association of grade 3 with poor survival (pooled HR: 4.53; 95% CI: 3.54–5.78; p < 0.00001), with no heterogeneity between studies (p = 0.72; I2 = 0%). Conclusion: Our meta-analysis found that grade 3 GEP NETs are associated with poor survival and additional future studies are needed to identify other risk factors associated with poor survival in GEP NETs to improve mortality.

Novel cultivation technologies demand the adaptation of existing analytical concepts. Metabolic flux analysis (MFA) requires stable-isotope labeling of biomass-bound protein as the primary information source. Obtaining the required protein in cultivation set-ups where biomass is scarce or inaccessible due to low cell densities and cell immobilization is difficult to date. We developed a non-disruptive analytical concept for 13C-based metabolic flux analysis based on secreted protein as an information carrier for isotope mapping in the protein-bound amino acids. This "metabolic flux probe" (MFP) concept was investigated in different cultivation set-ups with a recombinant, protein-secreting yeast strain. The obtained results grant insight into intracellular protein turnover dynamics. Experiments under metabolic but isotopically nonstationary conditions in continuous glucose-limited chemostats at high dilution rates demonstrated faster incorporation of isotope information from labeled glucose into the recombinant reporter protein than in biomass-bound protein. Our results suggest that the reporter protein was polymerized from intracellular amino acid pools with higher turnover rates than biomass-bound protein. The latter aspect might be vital for 13C-flux analyses under isotopically nonstationary conditions for analyzing fast metabolic dynamics.

Introduction: The 2019 novel coronavirus (COVID-19) is very contagious, and can be transmitted to other people by droplet, aerosol, sneezing, infected surface, and cough. There is no vaccine or effective treatment at this time. Therefore, the prevention of COVID-19 and the rapid diagnosis of infected patients is crucial. Method: We searched all relevant literature published up to February 28, 2020, from Embase, Scopus, PubMed, Web of Science, and the Cochrane library to collect the studies that reported clinical and laboratory characteristics of COVID-19 infected patients. The study quality was assessed with the Critical Appraisal Checklist. Depending on the heterogeneity test, we used either random or fixed-effect models to analyze the appropriateness of the pooled results. Result: Twenty studies were included in the meta-analysis, including a total of 52,251 patients with confirmed COVID-19 infection. 69.5% (95% CI 54.5-81, p < 0.001) of patients had a history of recent travel to Wuhan, contact with people from Wuhan, or lived in Wuhan. The most common symptoms among COVID-19 infected patients were fever 85.6 % (95% CI 73 -93, p < 0.001), and cough 63 % (95% CI 55.5-70, p < 0.001), respectively. The laboratory analysis showed that thrombocytosis was present in 91% (95% CI 81-98, p < 0.001) CRP was elevated in 81% (95% CI 65-91, p < 0.001), and lymphopenia in 62.5% of cases (95% CI 42-79, p < 0.001). The most common radiographic signs were bilateral involvement in 76.8% (95% CI 62.5-87, p < 0.001) and consolidation in 75.5% (95% CI 50.5-91, p < 0.001) of patients. Most patients (85.4%) were hospitalized, 20.6% of patients were admitted to the ICU in critical condition, and the mortality rate was 5.6%. Conclusions: Fever and cough are the most common symptoms of COVID-19 infection in the literature published to date. Thombocytosis, lymphopenia, and increased CRP were common lab findings although most patients included in the overall analysis did not have laboratory values reported. The most common radiographic sign was bilateral involvement in and consolidation. Among Chinese patients with COVID-19, rates of hospitalization, critical condition, and hospitalization were high in this study, but these findings may be biased by reporting only confirmed cases.

Process (or business process) management systems fulfill defining, executing, monitoring and managing process models deployed on process-aware enterprises. Accordingly, the functional formation of the systems is made up of three subsystems such as modeling subsystem, enacting subsystem and mining subsystem. In recent times, the mining subsystem has been becoming an essential subsystem. Many enterprises have successfully completed the introduction and application of the process automation technology through the modeling subsystem and the enacting subsystem. According as the time has come to the phase of redesigning and reengineering the deployed process models, from now on it is important for the mining subsystem to cooperate with the analyzing subsystem; the essential cooperation capability is to provide seamless integrations between the designing works with the modeling subsystem and the redesigning work with the mining subsystem. In other words, we need to seamlessly integrate the discovery functionality of the mining subsystem and the analyzing functionality of the modeling subsystem. This integrated approach might be suitable very well when those deployed process models discovered by the mining subsystem are complex and very large-scaled, in particular. In this paper, we propose an integrated approach for seamlessly as well as effectively providing the mining and the analyzing functionalities to the redesigning work on very large-scale and massively parallel process models that are discovered from their enactment event logs. The integrated approach especially aims at analyzing not only their structural complexity and correctness but also their animation-based behavioral properness, and becomes concretized to a sophisticated analyzer. The core function of the analyzer is to discover a very large-scale and massively parallel process model from a process log dataset and to validate the structural complexity and the syntactical and behavioral properness of the discovered process model. Finally, this paper writes up the detailed description of the system architecture with its functional integration of process mining and process analyzing. And more precisely, we excogitate a series of functional algorithms for extracting the structural constructs as well as for visualizing the behavioral properness on those discovered very large-scale and massively parallel process models. As experimental validation, we apply the proposed approach and analyzer to a couple of process enactment event log datasets available on the website of the 4TU.Centre for Research Data.

Remotely sensed data play a crucial role in monitoring the El-Niño/La-Niña Southern Oscillation (ENSO), which is an oceanic-atmospheric phenomenon occurring quasi-periodically with several impacts worldwide, such as specific biological and global climate responses. Since 1980, Earth has witnessed three strong ENSO events (1982–1983, This study aims, 2015-2016). In September 2022, La-Niña entered its third year and was unlikely to continue through 2023. Instead, since 2022 forecasts pointed to a transition from La-Nina to a Neutral phase in summer or late 2023. The onset of the El-Niño occurred around April 2023, and it is anticipated by sophisticated models to be a strong event through the Northern Hemisphere winter (December 2023 - February 2024). The aim of this study is to demonstrate the ability of the combination of two new methods to improve the accuracy of the above claim because El-Niño apart from climate anomalies, significantly impacts Earth’s ecosystems and human societies, regulating the spread of diseases by insects (e.g., malaria and dengue fever), and influencing nutrients, phytoplankton biomass, and primary productivity. This is done by exploring first the previous major El-Niño events in the period January 1876-July 2023. Our calculations show that the ongoing 2023-2024 El-Niño will not be the strongest.

This research explores the application of ARIMA (Autoregressive Integrated Moving Average) models and parallel computing techniques to analyze and forecast anemia diagnoses in children under 36 months in the Junín region of Peru. Using health data from 2023-2024, including insurance type, patient information, diagnosis dates, hemoglobin levels, and treatment details, we develop predictive models to understand trends and patterns in childhood anemia. The study aims to demonstrate the effectiveness of time series analysis and high-performance computing in addressing this critical public health issue. Results indicate improved forecasting accuracy and computational efficiency, potentially aiding in resource allocation and policy development for anemia prevention and treatment programs.

Plant-derived diterpene synthases (PdiTPSs) play a critical role in the formation of structurally and functionally diverse diterpenoids. However, the specificity or promiscuity of PdiTPSs remains unclear. In order to gain more understanding of this, the sequences of 199 functionally characterized PdiTPSs and their corresponding 3D structures were collected and manually corrected. Then, the correlations among sequences, domains, structures and their corresponding products were comprehensively analyzed. However, those features alone was insufficient for ef-fective product-specific classification of PdiTPSs as these methods could not establish a clear mapping between the enzymes and products. Nevertheless, local structural analysis can identify residues that have been experimentally proven to influence product outcomes through mutagenesis, and these residues exhibit conservation in spatial positioning and physicochemical properties. And aromatic residues surrounding the substrate exhibited selectivity towards its chemical structure. Specifically, tryptophan (W) was preferentially located around the linear substrate geranylgeranyl pyrophosphate (GGPP), while phenylalanine (F) and tyrosine (Y) were preferentially located around the initial cyclized diterpene intermediate. This analysis revealed the functional space of residues surrounding the substrate of PdiTPSs, most of which have not been experimentally explored. These findings provide guidance for screening specific residues for mutation studies to change the catalytic products of PdiTPSs.