Quantifying methane emissions is essential for meeting near-term climate goals and typically done using methane concentrations measured downwind of the source. One major source of methane that is important to observe and promptly remediate is fugitive emissions from oil and gas productions sites but installing methane sensors at the thousands of sites within a production basin is expensive. In recent years, relatively inexpensive metal oxide sensors have been used to measure methane concentrations at production sites. Current methods used to calibrate metal oxide sensors have been shown to have significant shortcomings resulting in limited confidence in methane concentrations generated by these sensors. To address this, we investigate using machine learning (ML) to generate a model that converts metal oxide sensor output to methane mixing ratios. To generate test data, two metal oxide sensors, TGS2600 and TGS2611, were collocated with a trace methane analyzer downwind of controlled methane releases. Over the duration of the measurements, the trace gas analyzer’s average methane mixing ratio was 2.40 ppm with a maximum of 147.6 ppm. The average calculated methane mixing ratios for the TGS2600 and TGS2611 using the ML algorithm were 2.42 ppm and 2.40 ppm with maximum values of 105.9 ppm and 106.3 ppm, respectively. A comparison of histograms generated using the analyzer and metal oxide sensors mixing ratios show overlap coefficients of 0.95 and 0.94 for the TGS2600 and TGS2611, respectively. Overall, our results showed there was a good agreement between the ML derived metal oxide sensors’ mixing ratios and those generated using the more accurate trace gas analyzer. This suggests that the response of lower-cost sensors calibrated using ML could be used to generate mixing ratios with precision and accuracy comparable to higher price trace methane analyzers. This would improve confidence in low-cost sensors’ response, reduce the cost of sensor deploying, and allow for timely and accurate tracking of methane emissions.

Soil salinization is an essential risk factor for agricultural development as well as for food security, and how to obtain regional soil salinity information more reliably remains a priority problem to be solved. To improve the accuracy of the inversions for soil salinity, a new inversion model for soil salinity based on stacking integrated algorithm for learning was submitted for this work which took the prediction results of several basic models as new features and then trained a secondary model to fuse the prediction results of basic models. We compared and analyzed it against four machine learning regression models, namely, random forest (RF), back propagation neural network, support vector regression, and convolutional neural network. Findings indicated the stacking integrated learning regression model fitted better and had good stability, on the test set, the stacking integrated learning regression model showed a relative increase of 8.16% in R2, a relative decrease of 13.95% in RMSE, and a relative increase of 6.47% in RPD when compared to the RF model, which was the single most effective machine learning regression model, and the stacking model was able to achieve soil salinity inversion more accurately. The soil salinity in the oasis areas of the Manas River Basin tended to decrease from north to south in 2016 to 2020 from a spatial point of view, and it was reduced in April from a temporal point of view. The percentage of pixels with a high soil salinity content of 2.75–2.8 g/kg in the study area had decreased by 19.64% in April 2020 compared to April 2016. The innovatively constructed stacking integrated learning regression model improved the accuracy of soil salinity estimation on the basis of the superior results obtained in the training of the single optimal machine learning regression model. As a consequence, this model can provide technological backup for a fast monitoring and inversion of soil salinity as well as prevention and containment of salinization.

With the continuous advancement of digital transformation, digital payments are playing an increasingly important role in the financial industry. This study aims to utilize machine learning models to predict and analyze digital payment behavior. Initially, the background and significance of digital payments in the financial sector are introduced. Subsequently, the current status and trends of traditional digital payment distribution are reviewed, alongside related work on digital payment behavior prediction. Methodologically, principles and applications of machine learning models such as logistic regression, decision trees, and random forests are elaborated, along with experimental design and data preprocessing methods. The experimental results and discussion section illustrates the performance of each model in digital payment prediction and explores their impact on credit decisions. This exploration equips financial institutions with more effective user behavior analysis and risk management tools, thereby fostering future development and application of digital payment technologies.

Polyfluoroalkyl substances (PFAS) are persistent chemicals that accumulate in the body and environment. Although recent studies have indicated that PFAS may disrupt kidney function, the underlying mechanisms and overall effects on the organ remain unclear. Therefore, this study aims to elucidate the impact of PFAS on kidney health using machine learning techniques. Utilizing a dataset containing PFAS chemical features and kidney parameters, dimensionality reduction and clustering were performed to identify patterns. Machine learning models, including XGBoost classifier, regressor, and Random Forest regressor, were then developed to predict kidney type from PFAS descriptors, estimate PFAS accumulation in the body, and predict the ratio of glomerular surface area to proximal tubule volume, which indicates kidney filtration efficiency. The kidney type classifier achieved 100% accuracy, confirming that PFAS exposure alters kidney morphology. The PFAS accumulation model attained an R^2 of 1.00, providing a tool to identify at-risk individuals. The ratio prediction model reached an R^2 of 1.00, offering insights into PFAS effects on kidney function. Furthermore, PFAS descriptors and anatomical variables were identified through analyses using feature importance, demonstrating discernible links between PFAS and kidney health, offering further biological significance. Overall, this study can significantly contribute to the current findings on the effect of PFAS while offering machine learning as a contributive tool for similar studies.

Inertial navigation system (INS) is a basic component for obtaining a continuous navigation solution in various applications. The INS navigation solution suffers from a growing error over time. In particular, its navigation solution depends mainly on the quality and grade of the inertial measuring unit (IMU) that provides the INS with both accelerations and angular rates. However, low-cost small micro-electro-mechanical systems (MEMS) suffer from tremendous error sources such as bias, scale factor, scale factor instability, and highly non-linear noise. Therefore, MEMS-IMU measurements lead to drifted solutions when used as a control input to the INS. Accordingly, several approaches have been introduced to model and mitigate the errors associated with IMU. In this paper, a machine learning-based adaptive neuro-fuzzy inference system (ML-ANFIS) is proposed to leverage the performance of low-grade IMUs in two phases. The first phase is training 50% of the low-grade IMU measurements with a high-end IMU to generate a suitable error model. The second phase involved testing the developed model on the remaining low-grade IMU measurements. A real road trajectory was conducted to evaluate the performance of the proposed algorithm. The results show the effectiveness of utilizing the proposed ML-ANFIS algorithm in removing errors and improving the INS solution compared to the traditional one. An improvement of 70% in the 2D-positioning and 92% in the 2D-velocity INS solution is attained when the proposed algorithm was applied compared to the traditional INS solution.

Medical health systems have been concentrating on artificial intelligence techniques for speedy diagnosis. However, the recording of health data in a standard form still requires attention so that machine learning can be more accurate and reliable by considering multiple parameters. The aim of this study is to develop a general framework for recording diagnostic data in an international standard format to facilitate auto-prediction of eye diseases. Efforts were made to ensure error-free data entry by developing a user-friendly interface. Furthermore, different machine learning algorithms were used to analyze patient data based on multiple parameters, including age, illness history, and clinical observations. This data was formatted according to structured hierarchies designed by medical experts, whereas diagnosis was made as per the ICD-10 coding developed by the American Academy of Ophthalmology. Furthermore, the system is designed to evolve through self-learning by adding new classifications for both diagnosis and symptoms. The classification results from tree-based methods demonstrated that the proposed framework performs satisfactorily given a sufficient amount of data. The random forest and decision tree algorithms predicted more accurately as compared to neural networks and the na{\"i}ve Bayes algorithm owing to structured data arrangement.

Machine learning (ML) is enabling augmented reality (AR) to gain popularity in various fields, including gaming, entertainment, healthcare, and education. ML enhances AR applications in education by providing accurate visualizations of objects. For AR systems, ML algorithms facilitate the recognition of objects and gestures from kindergarten through university. The purpose of this survey is to provide an overview of various ways in which ML techniques can be applied within the field of AR within education. The first step is to describe the background of AR. In the next step, we will discuss the ML models that are used in AR education applications. Additionally, we discuss how ML is used in AR. Each subgroup’s challenges and solutions can be identified by analyzing these frameworks. In addition, we outline several research gaps and future research directions in ML-based AR frameworks for education.

This study introduces the Dynamic Feedback-Driven Learning Optimization Framework (DFDLOF), an innovative machine learning-based approach to personalize educational pathways. DFDLOF leverages advanced algorithms for in-depth analysis of learner data, enabling the dynamic customization of educational content and methodologies. Its application in diverse online platforms, including Khan Academy and Coursera, underscores its adaptability and scalability. DFDLOF enhances learner engagement and outcomes by providing tailored learning experiences and real-time feedback. Key insights reveal its strengths in personalized education, particularly in dynamically adapting learning paths and the importance of real-time feedback. Challenges identified include integration complexities and data privacy concerns. Future research directions emphasize the need for longitudinal impact studies and broader demographic applications. This study contributes significantly to the evolving domain of adaptive learning technologies, demonstrating the transformative potential of machine learning in personalizing education.

ABSTRACT Underwater mines may destroy friendly submarines and marine habitats, compromising nonmilitary security. Finding credible information is vital to avoiding scams and spotting hazards. This article employs Supervised Machine literacy models to appropriately categorize subsea items like mines or gems based on Sonar sounds. Python constructs three double classifier models using Gorman and Sejnowski (1988) training data. Through the extraction of key aspects from the Sonar signals, such as spectral components and intensity, the models are able to match newly obtained data with the gemstone order or mine. Delicacy decreases the chance of misidentifications in nonmilitary activities. Machine literacy offers full validation that accommodates real-world Sonar data noise and unpredictability. Based on test results, the highest performing algorithm will deliver the required ratio of accuracy to perceptivity for the bracket task. Central keywords: vaticination model, bracket algorithms, supervised machine literacy, SONAR, and aquatic mining emphasize particular foundations. Improved sophistication in spotting undersea Mines let nonmilitary defence systems respond to proven threats only, preventing friendly submarines or sea life from unnecessary damage owing to false duplicity. This work is a promising start to real-world mine detection devices. Further developments may incorporate greater training data sets, real-time testing on subsea platforms equipped with integrated sonar, and optimization for the discovery of new mine-types. Overall, machine learning and Sonar vision decrease signal fluctuation and noise, making it easier to determine accurate boundaries for non-military applications and environmental protection. The recommended automated discovery technique must balance computational efficiency, generalizability, and delicacy. Prior a real crime, new quality control and verification procedures could boost trust even further.

River flood routing computes changes in shape of a flood wave over time as it travels downstream along a river. Conventional flood routing models, especially hydrodynamic models require high quality and quantity of input data such as measured hydrologic time series, geometric data, hydraulic structures and hydrological parameters. Unlike physically based models, machine learning algorithms, which are data driven models, do not require much knowledge about underlying physical processes and can identify complex nonlinearity between inputs and outputs. Due to the higher performance, less complexity, and low computation cost, novel machine learning methods as a single application or hybrid application were introduced by researchers to achieve more accurate and efficient flood routing. This paper reviews the recent application of machine learning methods in river flood routing.

Environmental and economic needs drive the increased penetration of intermittent renewable energy in electricity grids, enhancing uncertainty in market conditions prediction and network constraints. Thereafter, the importance of energy systems with flexible dispatch is reinforced, ensuring energy storage as an essential asset for these systems to be able to balance production and demand. In order to do so, such systems should participate in whole-sale energy markets, enabling competition among all players, including conventional power plants. Consequently, an effective dispatch schedule considering market and resource uncertainties is crucial. In this context, an innovative dispatch optimization strategy for schedule planning of renewable systems with storage is presented. Based on an optimization algorithm combined with a machine learning approach, the proposed method develops a financial optimum schedule with the incorporation of uncertainty information. Simulations performed with a concentrated solar power plant model following the proposed optimization strategy demonstrate promising financial improvement with a dynamic and intuitive dispatch planning method, emphasizing the importance of uncertainty treatment on the enhanced quality of renewable systems scheduling.

The use of machine learning (ML) approaches to target clinical problems is called to revolutionize clinical decision-making. The success of these tools is subjected to the understanding of the intrinsic processes being used during the classical pathway by which clinicians make decisions. In a parallelism with this pathway, ML can have an impact at four levels: for data acquisition, predominantly by extracting standardized, high-quality information with the smallest possible learning curve; for feature extraction, by discharging healthcare practitioners from performing tedious measurements on raw data; for interpretation, by digesting complex, heterogeneous data in order to augment the understanding of the patient status; and for decision support, by leveraging the previous step to predict clinical outcomes, response to treatment or to recommend a specific intervention. This paper discusses the state-of-the-art, as well as the current clinical status and challenges associated with each of these tasks, together with the challenges related to the learning process, the auditability/traceability, the system infrastructure and the integration within clinical processes.

The convergence of Class Incremental Learning (CIL) and Machine Unlearning (MU) is a rapidly developing field in machine learning, especially relevant in adaptive and privacy-sensitive environments like finance. CIL enables models to learn new data classes over time without losing previously acquired knowledge, while MU focuses on selectively forgetting specific data to comply with privacy laws or mitigate security risks. In this paper, we examine the theoretical foundations and practical applications of both approaches, particularly in the financial domain. We explore how these two paradigms interact and complement each other, discuss key algorithms, and present examples to illustrate their applications in areas such as portfolio management, fraud detection, and data privacy. Finally, we explore challenges and potential future directions in achieving optimal synergy between CIL and MU.

Online learning is gaining massive popularity with time. The e-learning platforms operate differently from traditional educational institutions and hence need different strategy for course recommendations. This survey aims to cover the major emerging research areas in e-learning recommender systems. Our study covers different areas of research including graph-based methodologies, ITS, query optimization, content-based, and collaborative filtering, big data, and association rules mining. This survey aimed to explore all major emerging directions of recommender systems in education. This study analyzed existing literature in all of the areas mentioned before and performed objective-based analysis. A brief performance analysis was also done for the researches where the values were comparable. Limitations of existing researches were also identified and studied to shed some light on future directions.

A huge number of applications available for Android-based smartphone devices have emerged over the past years. Due to which a huge number of malicious applications has been growing explosively. Many approaches have been proposed to ensure the security and quality of application in the markets. Usually, Machine Learning approaches are utilized in the classification process of malicious application detection. Calculating accurate results of characterizing applications behaviors, or other features, has a direct effect on the results with Machine Learning calculations. Android applications emerge so quickly. The behavior of current applications has gotten progressively malicious. The extraction of malware-infected features from applications is thus become a difficult task. According to our knowledge, a ton of features have been extricated in existing work however no survey has overviewed the features built for identifying malicious applications efficiently. In this paper, we will in general give an extensive review of such sort of work that identifies feature applications by describing various practices of uses with various kinds of features. In this survey we have discussed the following dimensions: extraction and selection of feature methods if any, methods of detection and evaluation performed. In light of our review, we notice the issues of investigating malware-affected features from applications, give the scientific categorization and demonstrate the future headings.

Users on the social networking platform have the freedom to express themselves freely. Towards the same time, this has created a forum for disagreement and hate directed at someone, society, racism, sexual orientation, and so on. Identifying hate online is a challenging task. Researchers from all around the world have contributed major methods for detecting hate speech, but owing to the issue's complexity, there are still many unresolved issues. In this research, we offer a multi-model learning strategy for detecting hate speech on Twitter. We utilised the Kaggle TwitterHate dataset, which had 31962 tweets categorised as binary hate or non-hate, to evaluate our technique. The suggested method is tested using commonly used machine learning classifiers with multi-model technique. Using TF-IDF features, we acquired detection results of 96.29 %, precision of 96%, recall of 96%, and f1-score of 96%.

Glioblastoma (GBM) is a very aggressive malignant brain tumor with the vast majority of patients surviving less than 12 months (Short-term survivors [STS]). Only around 2% of patients survive more than 36 months (Long-term survivors [LTS]). Studying these extreme survival groups might help in better understanding GBM biology. This work aims at exploring application of machine learning methods in predicting survival groups(STS, LTS). We used age and gene expression profiles belonging to 249 samples from publicly available datasets. 10 Machine learning methods have been implemented and compared for their performances. Hyperparameter tuned random forest model performed best with accuracy of 80% (AUC of 74% and F1_score of 85%). The performance of this model is validated on external test data of 16 samples. The model predicted the true survival group for 15 samples achieving an accuracy of 93.75%. This classification model is deployed as a web tool GlioSurvML. The top 1500 features which retained classification efficiency (Accuracy of 80%, AUC of 74%) were studied for enriched pathways and disease-causal biomarker associations using the HumanPSD^TM database. We identified 199 genes as possible biomarkers of GBM and/or similar diseases (like Glioma, astrocytoma, and others). 57 of these genes are shown to be differentially expressed across survival groups and/or have impact on survival. This work demonstrates the application of machine learning methods in predicting survival groups of GBM.

We suggest a deep learning based sensor signal processing method to remove chemical, kinetic and electrical artifacts from ion selective electrodes’ measured values. An ISE is used to investigate the concentration of a specific ion from aqueous solution, by measuring the Nernst potential along the glass membrane. However, application of ISE on a mixture of multiple ion has some problem. First problem is a chemical artifact which is called ion interference effect. Electrically charged particles interact with each other and flows through the glass membrane of different ISEs. Second problem is the kinetic artifact caused by the movement of the liquid. Water molecules collide with the glass membrane causing abnormal peak values of voltage. The last artifact is the interference of ISEs. When multiple ISEs are dipped into same solution, one electrode’s signal emission interference voltage measurement of other electrodes. Therefore, an ISE is recommended to be applied on single-ion solution, without any other sensors applied at the same time. Deep learning approach can remove both 3 artifacts at the same time. The proposed method used 5 layers of artificial neural networks to regress correct signal to remove complex artifacts with one-shot calculation. Its MAPE was less than 1.8% and R² of regression was 0.997. A randomly chosen value of AI-processed data has MAPE less than 5% (p-value 0.016).

The ability to read and quantify nucleic acids such as DNA and RNA using sequencing technologies has revolutionized our understanding of life. With the emergence of synthetic biology, these tools are now being put to work in new ways - enabling de novo biological design. Here, we show how sequencing is supporting the creation of a new wave of biological parts and systems, as well as providing the vast data sets needed for the machine learning of design rules for predictive bioengineering. However, we believe this is only the tip of the iceberg and end by providing an outlook on recent advances that will likely broaden the role of sequencing in synthetic biology and its deployment in real-world environments.

The rapid expansion of Bangladesh's financial infrastructure, coupled with the increasing digitization of banking services, underscores the critical importance of cybersecurity. Machine learning and deep learning methodologies have emerged as potent tools in combating cyber threats such as intrusion, malware, and fraud. By harnessing artificial intelligence and data-driven analysis, these techniques enable real-time scrutiny of vast banking data, facilitating proactive defense against cyberattacks. Bangladesh's evolving financial landscape, characterized by governmental digitalization initiatives and a national financial inclusion strategy, heightens the imperative for robust cybersecurity measures. This paper explores the application of machine learning and deep learning techniques in bolstering banking cybersecurity within the context of Bangladesh's burgeoning digital economy.

Now when the whole world is still under COVID-19 pandemic, many schools have transferred the teaching from physical classroom to online platforms. It is highly important for schools and online learning platforms to investigate the feedback to get valuable insights about online teaching process so that both platforms and teachers are able to learn which aspect they can improve to achieve better teaching performance. But handling reviews expressed by students would be a pretty laborious work if they were handled manually as well as it is unrealistic to handle large-scale feedback from e-learning platform. In order to address this problem, both machine learning algorithms and deep learning models are used in recent research to automatically process students' review getting the opinion, sentiment and attitudes expressed by the students. Such studies may play a crucial role in improving various interactive online learning platforms by incorporating automatic analysis of feedback. Therefore, we conduct an overview study of sentiment analysis in educational field presented in recent research, to help people grasp an overall understanding of the sentiment analysis research. Besides, according to the literature review, we identify three future directions that researchers can focus on in automatically feedback processing: high-level entity extraction, multi-lingual sentiment analysis, and handling of figurative language.

Quantum Machine Learning (QML) merges principles of Quantum Computing (QC) and Machine Learning (ML), offering improved efficiency and potential quantum advantage in data-driven tasks and solving complex problems. In binary classification, where the goal is to assign data into one of two categories, QML uses quantum algorithms to process large datasets efficiently. Quantum algorithms like Quantum Support Vector Machines (QSVM) and Quantum Neural Networks (QNN) exploit quantum parallelism and entanglement to enhance performance over classical methods. This research explores the use of QML algorithms for binary classification and compares their performance with classical ML methods. This study focuses on two common QML algorithms, Quantum Support Vector Classifier (QSVC) and QNN. We used the Qiskit software and did the experiments with three different datasets. Data preprocessing included dimensionality reduction using Principal Component Analysis (PCA) and standardization using scalers. The results showed that quantum algorithms demonstrated competitive performance against their classical counterparts in terms of accuracy, while QSVC performed better than QNN. These findings suggest that QML holds potential for improving computational efficiency in binary classification tasks. This opens the way for more efficient and scalable solutions in complex classification challenges and shows the complementary role of quantum computing.

Over the past 10 years, developments in precision oncology have led to a rise in the demand for predictive tools that assist the screening and stratification of patients for treatment. The possibility digitizing tissue slide images has led to the creation of artificial intelligence (AI) and machine learning algorithms in digital pathology, which could ultimately improve patient care. In this context, we assessed a variety of AI-based computational models for digital pathology. In this review, we described the latest AI applications in oncology, current challenges and future prospects.

The way in which the human being learns certain complex contents has always been a focus of interest and a challenge for researchers. Given the fact that children's cognitive abilities do not fully develop until a certain age, this topic is particularly important in the young children's learning scope as they do not correctly and easily learn some content of abstract nature, such as contents in math class. This work presents the results of the use of an application called "Mathematics Learning System with Augmented Reality based on Kinect" (SAM-RAK by its acronym in Spanish), which was designed to cover basic topics of mathematics in the Basic General Education level (EGB by its acronym in Span-ish) in Ecuador. The research was carried out under an experimental quantitative approach with 30 children (18 girls and 12 boys), who study in third grade of EGB level, from 2 different educational in-stitutions in Riobamba city. In order to obtain the results that evaluate the developed application, a pre-test and a post-test were applied, which were contrasted with the student’s t-test for paired samples. The statistical evidence suggests that the proposed computer system had a positive effect on children's performance, when it was used as a support tool in the classroom. The system was more effective in low performance children compared to those of high performance. It was also proved that children were motivated and showed positive attitudes when using the proposed System.

Background: Objective quantitative texture characteristics may be helpful in salivary glandular tumor differential diagnosis. This study uses machine learning (ML) to explore and validate the performance of ultrasound (US) texture features in diagnosing salivary glandular tumors. Material and methods: 122 patients with salivary glandular tumors, including 71 benign and 51 malignant tumors, are enrolled. A representative brightness mode US pictures are selected for further Gray Level Co-occurrence Matrix (GLCM) texture analysis. We use t-test to test the significance and use receiver operating characteristic curve method to fund optimal cut-point for these significant features. After splitting 80% data into training set and 20% data into testing set, we use five machine learning models k-nearest Neighbors (kNN), Naïve Bayes, Logistic regression, Artificial Neural Networks (ANN) and supportive vector machine (SVM) to explore and validate the performance of US GLCM texture features in diagnosing salivary glandular tumors. Results: This study includes 49 female and 73 male patients, with a mean age of 53 years old, ranging from 21 to 93. We find that six GLCM texture features (contrast, inverse difference movement, entropy, dissimilarity, inverse difference and difference entropy) are significantly different between benign from malignant tumors (p<0.05). On ML, the overall accuracy rates are 74.3% (95%CI: 59.8-88.8%), 94.3% (86.6-100%), 72% (54-89%), 84% (69.5-97.3%) and 73.5% (58.7-88.4%) for kNN, Naïve Bayes, Logistic regression, one node ANN and SVM, respectively. Conclusion: US texture analysis with ML has potential as an objective and valuable tool for assessment of salivary gland tumors.

Nowadays, digitalization and automation in both industrial and research activities is a driving force for innovations. In recent years, Machine Learning (ML) techniques - the subset of Artificial Intelligence - have been widely applied as a key tool to automize and digitalize numerous in-dustrial processes. ML models can predict specific features, like materials' lifetime in a heating device, based on recently trained algorithms with applied input data. The results of ML algorithms are easy to interpret and can significantly decrease the time of research and decision-making, thus, substituting the trial-error approach. This work presents the state of the art in the application of Machine Learning in the investigation of MgO-C refractories for the steel industry. Also, the work presents an overview of the most commonly used ML algorithms in refractory engineering. So far published results confirm the high performance of ML, e.g., for prediction of oxidation behaviour, optimum graphite content and wear rate of MgO-C refractories, or for clustering materials based on various fused and sintered MgO sources into groups with similar corrosion resistance, thus, permitting to reduce expensive fused raw materials content. Most of the presented works were positively validated via experiment.

This study assessed the potential of back extensor strength as an alternative marker of frailty. A total of 560 farmers were included. Computed tomography scans measured fat and muscle mass volumes at the mid-L4 vertebral level. Back extensor strength was measured in a seated posture. Multivariate linear regression analyzed the associations between back extensor strength and trunk muscle/fat compositions. The participants were divided into two groups based on back extensor strength. Propensity score matching, multivariate logistic regression, and Extreme Gradient Boosting (XGBoost) were employed to evaluate the relationship between Fried's frailty criteria and back extensor strength. Back extensor strength exhibited positive associations with abdominal muscle volume (r = 1.12) as well as back muscle volume (r = 0.89) (p < 0.05). Lower back extensor strength was linked to more frail status, such as reduced grip strength, walking speed, and fre-quent self-reported exhaustion. Multivariate logistic regression indicated a significant association between lower back extensor strength and higher Fried frailty score (OR, 0.990; p<0.05). XGBoost analysis identified back extensor strength as the most important predictor (gain = 0.502) for frailty, surpassing the significance of age (gain = 0.325). These findings suggested the potential of back extensor strength as an alternative frailty marker.

This paper analyses the application of deep learning techniques for predicting wave overtopping events in port environments using sea state and weather forecasts as inputs. The study was conducted in the outer port of Punta Langosteira, A Coruña, Spain. A video recording infrastructure was installed to monitor overtopping events from 2015 to 2022, identifying 3709 overtopping events. The data collected was merged with actual and predicted data for the sea state and weather conditions during the overtopping events, creating three datasets. We used these datasets to create several machine learning models to predict whether an overtopping event would occur based on sea state and weather conditions. The final models achieved a high accuracy level during the training and testing stages: 0.81, 0.73, and 0.84 average accuracy during training and 0.67, 0.48, and 0.86 average accuracy during testing, respectively. The results of this study have significant implications for port safety and efficiency, as wave overtopping events can cause disruptions and potential damage. Using deep learning techniques for overtopping prediction can help port managers take preventative measures and optimize operations, ultimately improving safety and helping to minimize the economic impact that overtopping events have on the port's activities.

Machine learning is a fundamental aspect of artificial intelligence that involves the development of algorithms and models that allow computers to learn and make predictions or decisions without explicit programming. With the development of neural networks, back-propagation algorithms and deep learning, machine learning has made breakthroughs in the fields of image recognition, natural language processing and handwriting recognition using machine learning techniques. The advent of deep learning has revolutionized the field of handwriting recognition, using convolutional neural networks, recurrent neural networks, and sequence-to-sequence models to provide solutions that go beyond machine learning methods and significantly improve the accuracy and robustness of handwriting recognition systems. But challenges remain, including the need for large labelled datasets, computational resources and addressing potential biases. As research in deep learning techniques continues to drive handwriting recognition closer towards realisability, machine learning approaches remain at the forefront.

This is an article or technical note which is intended to provides an insight journey of Machine Learning Systems (MLS) testing, its evolution, current paradigm and future work. Machine Learning Models, used in critical applications such as healthcare industry[1], Automobile [2], [3] and Air Traffic control, Share Trading etc., and failure of ML Model can lead to severe consequences in terms of loss of life or property. To remediate this, developers, scientists, and ML community around the world, must build a highly reliable test architecture for critical ML application. At the very foundation layer, any test model must satisfy the core testing attributes such as test properties and its components. This attribute comes from the software engineering [5], [6], but the same cannot be applied in as-is form to the ML testing and we will tell you “why”.

The accurate detection and assessment of stress play a pivotal role in enhancing individual well-being and healthcare outcomes. Traditional methods of stress detection often grapple with limitations in accuracy and scalability. With the advent of machine learning (ML), the potential to revolutionize stress detection has emerged. This paper presents a comprehensive study on the application of ML algorithms for stress detection, with a focus on physiological and behavioral data analysis. Central to our approach is the integration of SHapley Additive exPlanations (SHAP), an Explainable Artificial Intelligence (XAI) technique, to interpret ML models. SHAP provides a novel lens to understand the impact of individual features in the complex decision-making processes of ML models, thereby enhancing the transparency and reliability of stress predictions. We demonstrate how SHAP not only aids in elucidating model decisions but also contributes to refining the models for greater accuracy. Our results highlight the effectiveness of ML in detecting stress and the pivotal role of XAI in making these models more interpretable and trustworthy. This study underscores the synergy between advanced ML techniques and XAI, paving the way for more nuanced and reliable stress detection methodologies that are essential in diverse settings, from healthcare to workplace environments.

Research in brain stroke prediction is very crucial as it can lead to the development of early detection techniques and interventions that can enhance the prognosis for stroke victims. Early detection and intervention can help to minimise the damage caused by a stroke, reduce the risk of long-term complications, and enhance the general quality of life for people who have survived a stroke. Additionally, research in stroke prediction can help to identify risk factors and improve understanding of the underlying causes of stroke, which can lead to the development of better prevention strategies. Research on brain stroke prediction is ongoing and has led to the development of various models and tools for predicting the risk of stroke and detecting it early. However, the implementation and use of these tools in clinical practise vary depending on several factors, such as the availability of resources, the specific healthcare system, and the level of awareness and acceptance of these tools among healthcare providers and patients. In general, risk prediction models may be used to quickly identify individuals at high risk of stroke and target them for preventive interventions, such as lifestyle changes, medication management, and screenings. Early detection tools can be used to quickly identify stroke symptoms and initiate appropriate treatment, which can improve outcomes for stroke patients. However, it is important to note that research and development of these models and tools are ongoing, and their use in clinical practise is constantly evaluated and updated. It may take time for these tools to be widely adopted in clinical practise and to see their real-world impact. This research paper focuses on predicting brain stroke occurrence using a range of machine learning algorithms such as Logistic Regression (LR), Decision Tree (DT), Random Forest (RF), Support Vector Machine (SVM), K-Nearest Neighbor (KNN), Gaussian Naive Bayes (GNB), Bernoulli Naive Bayes (BNB), and a Voting Classifier. The main emphasis of this research was to compare the effectiveness of oversampling techniques, as the data was significantly imbalanced. We have used evaluation metrics in this research to assess the accuracy, precision, recall, and other key performance indicators of a model's predictions. Area under the Receiver Operating Characteristics Curve (AUC), minority class accuracy, and majority class accuracy were used to assess the approaches.

Advancements in Machine Learning techniques, availability of more data-sets, and increased computing power have enabled a significant growth in a number research areas. Predicting, detecting and classifying complex events in earth systems which by nature are difficult to model is one of such areas. In this work, we investigate the application of different machine learning techniques for detecting and identifying extreme rainfall events in a sub-catchment within Pangani River Basin, found in Northern Tanzania. Identification and prediction of extreme rainfall event is a preliminary crucial task towards success in predicting rainfall-induced river floods. To identify a rain condition in the selected sub-catchment, we use data from five weather stations which have been labeled for the whole sub-catchment. In order to assess which Machine Learning technique suits better for rainfall identification, we apply five different algorithms in a historical dataset for the period of 1979 to 2014. We evaluate the performance of the models in terms of precision and recall, reporting Random Forest and XGBoost as the ones with best overall performance. However, since the class distribution is imbalanced, the generic Multi-layer Perceptron performs best when identifying the heavy rainfall events, which are eventually the main cause of rainfall-induced river floods in the Pangani River Basin

The role of insurance in financial inclusion as well as in economic growth is immense. However, low uptake seems to impede the growth of the sector hence the need for a model that robustly predicts uptake of insurance among potential clients. In this research, we compared the performances of eight (8) machine learning models in predicting the uptake of insurance. The classifiers considered were Logistic Regression, Gaussian Naive Bayes, Support Vector Machines, K Nearest Neighbors, Decision Tree, Random Forest, Gradient Boosting Machines and Extreme Gradient boosting. The data used in the classification was from the 2016 Kenya FinAccess Household Survey. Comparison of performance was done for both upsampled and downsampled data due to data imbalance. For upsampled data, Random Forest classifier showed highest accuracy and precision compared to other classifiers but for down sampled data, gradient boosting was optimal. It is noteworthy that for both upsampled and downsampled data, tree-based classifiers were more robust than others in insurance uptake prediction. However, in spite of hyper-parameter optimization, the area under receiver operating characteristic curve remained highest for Random Forest as compared to other tree-based models. Also, the confusion matrix for Random Forest showed least false positives, and highest true positives hence could be construed as the most robust model for predicting the insurance uptake. Finally, the most important feature in predicting uptake was having a bank product hence bancassurance could be said to be a plausible channel of distribution of insurance products.

The Covid19 pandemic and the current wars in some countries have put incredible pressures on the global economy. Challenges for the U.S. include not only economic factors, major disruptions and reorganizations of the supply chains, but also those of national security and global geopolitics. This unprecedented situation makes predicting economic crisis for the coming years crucial yet challenging. In this paper, we propose a method based on various machine-learning models to predict the probability of a recession for the US economy in the next year. We collect the U.S’ monthly macroeconomics indicators and recession data from January of 1983 to December of 2023 to predict the probability of an economic recession in 2024. The performance of the individual economics indicator for the coming year was predicted separately, and then all of the the predicted indicators were used to forecast a possible economic recession. Our results showed that the U.S. will face a high probability of being in a recession period in the last quarter of 2024.

Squash is a sport where referee decisions are essential to the game. However, referee decisions in squash are very subjective in nature. Disputes, both from the players and the audience, regularly happen because the referee made a controversial call. In this study ,we proposed to automate the referee decision process through machine learning. We trained neural networks to predict squash referee decisions using data from 400 referee decisions acquired through extensive video footage reviewing and labeling. Six positional values were extracted, including the attacking player’s position, the retreating player’s position, the ball’s position in the frame, the ball’s projected first bounce, the ball’s projected second bounce, and the attacking player’s racket head position. We calculated nine additional distance values, such as the distance between players and the distance from the attacking player's racket head to the ball's path. Models were trained on Wolfram Mathematica and Python using these values. The best Wolfram Mathematica model achieved an 86% ± 3.03% accuracy, while the best Python model performed a 0.852 ± 0.051 accuracy (85.2% ± 5.1%). These accuracies surpass 85%, demonstrating near-human performances. Our model has great potential for improvement as it's currently trained with limited data (400 referee decisions) and lacks crucial data points such as time and speed. The performance of our model is almost surely going to improve significantly with a larger training data set. Unlike human referees, machine learning models follow a consistent standard, have unlimited attention spans, and make decisions instantly. If the accuracy is improved in the future, the model can potentially serve as an extra refereeing official for both professional and amateur squash matches. Both the analysis of referee decisions in squash and proposal to automate the process using machine learning is unique to this study.

This paper explores the application of machine learning techniques for automated object grasping. Current electronic prosthetics often require extensive training for users to gain fine motor control over the prosthetic fingers, hindering their usability and acceptance. To address this challenge, this paper proposes an automated method that leverages computer vision-based techniques and machine learning algorithms. In this study, three reinforcement learning algorithms, namely Soft Actor-Critic (SAC), Deep Q-Network (DQN), and Proximal Policy Optimization (PPO), are employed to train agents for automated grasping tasks. The results indicate that the SAC algorithm achieves the highest success rate of 99% among the three algorithms at just under 200,000 timesteps. This research also shows that object’s physical characteristics can affect the agent’s ability to learn an optimal policy. Moreover, the findings highlight the potential of the SAC algorithm in developing intelligent prosthetic hands with automatic object gripping capabilities.

Recently, spam emails have become a significant problem with the expanding usage of the Internet. It is to some extend obvious to filter emails. A spam filter is a system that detects undesired and malicious emails and blocks them from getting into the users' inboxes. Spam filters check emails for something "suspicious" in terms of text, email address, header, attachments, and language. However, we have used different features such as word2vec, word n-grams, character n-grams, and a combination of variable length n-grams for comparative analysis in our proposed approach. Different machine learning models such as support vector machine (SVM), decision tree (DT), logistic regression (LR), and multinomial naïve bayes (MNB) are applied to train the extracted features. We use different evaluation metrics such as precision, recall, f1-score, and accuracy to evaluate the experimental results. Among them, SVM provides 97.6 \% of accuracy, 98.8\% of precision, and 94.9\% of f1-score using a combination of n-gram features.

Device-to-device (D2D) communication is a promising paradigm for the fifth generation 2 (5G) and beyond 5G (B5G) networks. Although D2D communication provides several benefits, 3 including limited interference, energy efficiency, reduced delay, and network overhead, it faces a lot 4 of technical challenges such as network architecture, and neighbor discovery, etc. The complexity 5 of configuring D2D links and managing their interference, especially when using millimeter-wave 6 (mmWave), inspire researchers to leverage different machine-learning (ML) techniques to address 7 these problems towards boosting the performance of D2D networks. In this paper, a comprehensive 8 survey about recent research activities on D2D networks will be explored with putting more 9 emphasis on utilizing mmWave and ML methods. After exploring existing D2D research directions 10 accompanied with their existing conventional solutions, we will show how different ML techniques 11 can be applied to enhance the D2D networks performance over using conventional ways. Then, still 12 open research directions in ML applications on D2D networks will be investigated including their 13 essential needs. A case study of applying multi-armed bandit (MAB) as an efficient online ML tool 14 to enhance the performance of neighbor discovery and selection (NDS) in mmWave D2D networks 15 will be presented. This case study will put emphasis on the high potency of using ML solutions 16 over using the conventional non-ML based methods for highly improving the average throughput 17 performance of mmWave NDS.

Early detection of stress can prevent us from suffering from a long-term illness such as depression and anxiety. This article presents a scoping review of stress detection based on electrodermal activity (EDA) and machine learning (ML). From an initial set of 395 articles searched in six scientific databases, 58 were finally selected according to various criteria established. The scoping review has made it possible to analyse all the steps to which the EDA signals are subjected: acquisition, preprocessing, processing and feature extraction. Finally, all the ML techniques applied to the features of this signal have been studied for stress detection. It has been found that support vector machines and artificial neural networks stand out within the supervised learning methods given their high performance values. On the contrary, it has been evidenced that unsupervised learning is not very common in the detection of stress through EDA. This scoping review concludes that the use of EDA for the detection of arousal variation (and stress detection) is widely spread, with very good results in its prediction with the ML methods found during this review.

The popularity of deep reinforcement learning (DRL) methods in economics have been exponentially increased. DRL through a wide range of capabilities from reinforcement learning (RL) and deep learning (DL) for handling sophisticated dynamic business environments offers vast opportunities. DRL is characterized by scalability with the potential to be applied to high-dimensional problems in conjunction with noisy and nonlinear patterns of economic data. In this work, we first consider a brief review of DL, RL, and deep RL methods in diverse applications in economics providing an in-depth insight into the state of the art. Furthermore, the architecture of DRL applied to economic applications is investigated in order to highlight the complexity, robustness, accuracy, performance, computational tasks, risk constraints, and profitability. The survey results indicate that DRL can provide better performance and higher accuracy as compared to the traditional algorithms while facing real economic problems at the presence of risk parameters and the ever-increasing uncertainties.

Properties of spatially explicit data are often ignored or inadequately handled in machine learning for spatial domains of application. At the same time, resources that would identify these properties and investigate their influence and methods to handle them in machine learning applications are lagging behind. In this survey of the literature, we seek to identify and discuss spatial properties of data that influence the performance of machine learning. We review some of the best practices in handling such properties in spatial domains and discuss their advantages and disadvantages. We recognize two broad strands in this literature. In the first, the properties of spatial data are developed in the spatial observation matrix without amending the substance of the learning algorithm; in the other, spatial data properties are handled in the learning algorithm itself. While the latter have been far less explored, we argue they offer the most promising prospects for the future of spatial machine learning.

The loss of integrity and adverse effect on mechanical properties can be concluded as attributing miro/macro-mechanics damage in structures, especially in composite structures. Damage as a progressive degradation of material continuity in engineering predictions for any aspects of initiation and propagation requires to be identified by a trustworthy mechanism to guarantee the safety of structures. Besides the materials design, structural integrity and health are usually prone to be monitored clearly. One of the most powerful methods for the detection of damage is machine learning (ML). This paper presents the state of the art of ML methods and their applications in structural damage and prediction. Popular ML methods are identified and the performance and future trends are discussed.

Text recognition is an important area of the pattern recognition field. Natural language processing (NLP) and pattern recognition have been utilized efficiently in script recognition. Much research has been done on handwritten script recognition. However, the research on the Arabic language for handwritten text recognition received little attention compared with other languages. Therefore, it is crucial to develop a new model that can recognize Arabic handwritten text. Most of the existing models used to acknowledge Arabic text are based on traditional machine learning techniques. Therefore, we implemented a new model using deep machine learning techniques by integrating two deep neural networks. The architecture of the Residual Network (ResNet) model is used to extract features from raw images. Then, the Bidirectional Long Short-Term Memory (BiLSTM) and connectionist temporal classification (CTC) are used for sequence modeling. Our system improved the recognition rate of Arabic handwritten text compared to other models of similar type with a character error rate of 13.2% and character error rate of 27.31%. In conclusion, the domain of Arabic handwritten recognition is advancing swiftly with the use of sophisticated deep learning methods.

Several outbreak prediction models for COVID-19 are being used by officials around the world to make informed-decisions and enforce relevant control measures. Among the standard models for COVID-19 global pandemic prediction, simple epidemiological and statistical models have received more attention by authorities, and they are popular in the media. Due to a high level of uncertainty and lack of essential data, standard models have shown low accuracy for long-term prediction. Although the literature includes several attempts to address this issue, the essential generalization and robustness abilities of existing models need to be improved. This paper presents a comparative analysis of machine learning and soft computing models to predict the COVID-19 outbreak. Among a wide range of machine learning models investigated, two models showed promising results (i.e., multi-layered perceptron, MLP, and adaptive network-based fuzzy inference system, ANFIS). Based on the results reported here, and due to the highly complex nature of the COVID-19 outbreak and variation in its behavior from nation-to-nation, this study suggests machine learning as an effective tool to model the outbreak.

Causality is the most important topic in the history of Western Science, and since the beginning of the statistical paradigm, it meaning has been reconceptualized many times. Causality entered into the realm of multi-causal and statistical scenarios some centuries ago. Despite of widespread critics, today Deep Learning and Machine Learning advances are not weakening causality but are creating a new way of finding indirect factors correlations. This process makes possible us to talk about approximate causality, as well as about a situated causality.

Cereals are essential for global food consumption, providing half of the world’s calorie intake and ranking as the top traded agricultural commodity. By 2032, 41% of cereals are expected to be consumed directly by humans, with 37% used as animal feed. As key sources of carbohydrates, protein, minerals, vitamins, and fiber, cereals deliver balanced nutrients for humans and livestock. Rice and wheat are the most widely consumed, yet over 3 billion people still suffer from micronutrient deficiencies, particularly iron, zinc, and vitamin A, leading to widespread malnutrition affecting over 2 billion globally. Nutrient deficiencies contribute significantly to childhood mortality, with undernutrition causing 45% of deaths in children under five. Cereals naturally contain essential micronutrients, including iron, zinc, and B vitamins, along with fiber that supports cardiovascular health and reduces cancer risks. While the growth rate of cereal consumption is slowing, it remains steady, especially in developing countries, where cereals provide 56% of daily caloric intake. To address malnutrition, biofortifying cereals to enhance iron, zinc, and vitamin A content could be transformative. This review highlights the nutritional importance of cereals, the need for balanced diets, and how biofortification and genetic editing can combat global malnutrition.

The continues evolution of coronaviruses has gained considerable attention prior to the outbreak of COVID 19. Although, COVID-19 is currently not recognized as a global pandemic, the virus's ability to evolve and cause disease outbreaks in both humans and animals necessitates ongoing research into its genetic and structural characteristics. Therefore, understanding the molecular origin, rapid evolution, as were as the immunogenicity of coronaviruses is a critical step towards preparing for and preventing future outbreaks. This study aimed to uncover the genetic diversity and evolutionary relationships among the main viral proteins of SARS-CoV-2 and other related coronaviruses. Amino acid sequences of structural viral proteins spike glycoprotein, nucleocapsid protein, membrane protein, and envelope protein were retrieved from the NCBI database for SARS-CoV-2 and 13 other coronaviruses. Here, we identified that SARS-CoV-2 is closely related to BatCoV RaTG13 and Pangolin-CoV, suggesting their potential role in the emergence of the virus. Additionally, we predicted novel epitopes, glycosylation sites, and cleavage sites, identifying three novel glycosylation sites (NATR, NXSN, and NGTK) and six new CTL epitopes (XSNQVAVLY, NSFTRGVYY, NATRFASVY, STQDLFLPF, NSASFSTFK, and ASFSTFKCY). Our comparative analysis revealed that BatCoV RaTG13 has the closest cleavage site to SARS-CoV-2, with significant similarities also observed with Pangolin-CoV. The study highlighted the unique features of SARS-CoV-2, including its furin cleavage site, which may account for its high infectivity during the pandemic. These findings contribute to the understanding of SARS-CoV-2 evolution and its relationship with other coronaviruses, providing critical insights for the development of broad-spectrum vaccines and antiviral therapies.

In this study, we aimed to investigate the differences in tissue surface adaptation and the variations in distances between reference points on the polished surfaces of 3D-printed denture bases with different build angles. The build angles were 0°, 30°, 60°, and 90°, with 15 denture bases printed for each angle. Using the Geomagic Control® software, a 3D best-fit alignment was conducted between the denture base tissue surface and the reference shape of the edentulous maxilla model to calculate the root mean square error. The distances between reference points on the polished surface were measured using digital calipers. One-way analysis of variance was conducted for statistical analysis. The adaptation, as measured by the root mean square error, varied significantly among denture bases with different build angles. The distances between the anterior and posterior reference points of the polished surface were also significantly different. However, within the limitations of this study, the variations in adaptations and dimensional accuracy across different build angles were within clinically acceptable ranges. In clinical practice, the print angle can be adjusted based on factors, such as printing time, resin consumption, and the number of denture bases being printed simultaneously.

Permafrost covers about 23% ~ 25% of the land in the northern hemisphere, mainly in Russia, Canada, Alaska, Northeast and Qinghai Tibet Plateau (QTP) in China. Many engineering especially the transportation has been in the permafrost regions above. Under the action of highways construction and global warming, permafrost under infrastructures is degraded and causes serious damage. Two phases closed thermosyphon (TPCT) is a widely accepted green countermeasure against the problem in permafrost regions. Although it has been applied to prevent permafrost degradation, their application presents significant challenges on account of the stronger endothermic action of asphalt pavement. This paper focused on the thermosyphon technology and application in the permafrost. Moreover, the article highlighted the excellent working performance of the TPCT that improving the stability of the infrastructures and prevent it degrading due its excellent efficiency of heat transfer. The industrial applications of the TPCT were also summarized, along with their limitations. Finally, the results reported in this paper can provide a valuable guidance for the design of the TPCT and construction of the permafrost regions in the future.

The bioindicator potential of seagrass ecosystems in coastal trace metal monitoring is low for tropical island ecosystems. This study evaluated the bioindicator potential of six seagrass species exposed to anthropogenic trace metal pollution in the Andaman and Nicobar Islands (ANI) of India. Sediment and seagrass biomass, samples were analyzed for trace metals (Co, Cr, Cu, Fe, Mg, Mn, Ni, Pb, Zn) from four locations of ANI exposed to anthropogenic contamination. Geo accumulation Index values indicated moderate trace metal contamination in seagrass sediment. Seagrass trace metal accumulation from sediment was both species-specific and location- specific for ANI. Small seagrass species such as H. ovalis, H. beccarii and H. uninervis accumulated the maximum concentration of six trace metals (Cr, Cu, Fe, Ni, Pb, Zn) in their tissues compared to big seagrass species like T. hemprichii and E. acoroides of ANI. This study indicates leaves of small seagrass and roots of big seagrass species can serve as short- and long-term bioindicators respectively, of coastal trace metal contamination in tropical islands of ANI.

Background: Waterborne diseases pose a significant global public health threat, compelling enhanced comprehensive surveillance. This study investigates the current infectious disease and antimicrobial resistance (AMR) surveillance systems, including wastewater and environmental surveillance (WES), in three sub-Saharan African countries: Tanzania, Burkina Faso, and the Democratic Republic of the Congo (DRC). The three countries have their specificities regarding wastewater networks and logistic systems. So, emphasizing the need to strengthen existing disease surveillance, the paper advocates for incorporating WES systems specifically designed for countries' context to monitor waterborne and re-emerging pathogens, as well as AMR.Methods: National workshops were conducted to assess the current clinical and environmental surveillance systems and identify priority pathogens for new environmental monitoring. Data were collected through surveys from experts in academia, research, policy, and healthcare. Results: Prioritized pathogens for WES include waterborne (poliovirus, Salmonella Typhi, Vibrio cholerae), respiratory (influenza A&B, SARS-CoV-2), other (Measles and Rubella, Mycobacterium tuberculosis). Recommended AMR pathogens include drug-resistant Mycobacterium tuberculosis, Salmonella spp., methicillin-resistant Staphylococcus aureus, and extended-spectrum beta-lactamase and carbapenemase-producing E. coli. Tanzania, Burkina Faso, and the DRC employ DHSI2-based centralized electronic systems for clinical data collection, complemented by Excel and paper-based registries. The WES approach is commonly employed for monitoring poliovirus and rarely for AMR and other pathogens. Discussion and conclusions: WES is a valuable tool for early detection of locally circulating human-derived pathogens, aiding in outbreak detection, data-driven epidemic response, and prevention. The availability of WES results underscores the importance of effective sanitation for safeguarding human, animal, and environmental health. WES is a pivotal tool for integrated risk management, preventing waterborne outbreaks, protecting drinking water sources, and ultimately gaining various UN Sustainable Development Goals. The study highlights the importance of customized WES systems in line with each country's context, emphasizing localized approaches for effective monitoring of waterborne pathogens and AMR.

Microplastics and nanoplastics (MP/NPs) have been found everywhere they have been searched. On the top of Everest, in the Mariana Trench, on the clouds e recently, microplastics have been discovered in the human placenta, meconium and babies’ feces. In this review we explain what the consequences of the presence of these pollutants in fetuses and newborns are, with particular attention to human breastfeeding. Finally, we outline the possible political and social solutions to the problem of plastic overproduction that characterizes the modern world.

BACE1 is involved in the production of beta-amyloid peptides, and inhibiting its activity is a potential therapeutic strategy for managing Alzheimer's disease, as excessive beta-amyloid accumulation is a characteristic feature of the disease.Computational results suggest that hypericin has the potential to act as an inhibitor of BACE1. The Molecular Docking results indicate a high binding affinity between hypericin and BACE1, with a notable binding energy score of -10.3 kcal/mol. Additionally, the formation of various chemical bonds, including hydrogen bonds and hydrophobic bonds, further supports the idea that hypericin may effectively interact with the active site of BACE1. It's important to note that while the in silico Molecular Docking results are promising, further in vitro and in vivo studies would be necessary to validate and better understand the inhibitory potential of hypericin against BACE1. Additionally, the practical application of hypericin as a BACE1 inhibitor in a therapeutic context would require careful consideration of factors such as bioavailability, safety, and efficacy.

Enhancing traffic safety is one of the fundamental objectives of Intelligent Transport Systems (ITS), and it aligns closely with the principles of sustainable transport. Due to specific differences in infrastructure, vehicles, and users’ behaviour, places where different modes of traffic intersect are recognized as critical points of the traffic system, making them crucial aspects of Sustainable Urban Mobility Plans (SUMPs) implementation. The SUMPs aim to create urban mobility that is not only environmentally friendly and efficient but also safe for all users. The continuous development and widespread adoption of innovative ITS technologies have paved the way for a system that could provide drivers with real-time information about both immediate and potential dangers at these critical points. This paper provides an overview of previous research in the field, investigating the impact of information systems on drivers’ behaviour, various detection and communication solutions that can be effectively integrated into such a system, as well as a brief overview of models and solutions that have been developed to warn drivers in a similar context. The reviewed literature offered valuable insights on which a novel driver information system architecture framework is proposed. This framework can contribute to the ongoing safety improvement in multimodal transport networks within the context of sustainable transport.

Predicting credit default risk is important to financial institutions, as accurately predicting the likelihood of a borrower defaulting on their loans will help to reduce financial losses, thereby maintaining profitability and stability. Although machine learning models have been used in assessing large applications with complex attributes for these predictions, there is still a need to identify the most effective techniques and to also address the issue of data imbalance. In this research, we conducted a comparative analysis of random forest, decision tree, SVM (Support Vector Machine), XGBoost (eXtreme Gradient Boosting), ADABoost (ADAptive Boosting) and multilayered perceptron with three-hidden layers, to predict credit default using loan data from LendingClub. Additionally, we also combined the model predictions using voting and stacking ensemble methods to enhance the models' performance. Furthermore, various sampling techniques was explored to handle the issue of class imbalance observed in the dataset, with the result showing that the balanced data performs better than the imbalanced data. Our proposed model achieved an accuracy of 93.7%, a precision of 95.6% and a recall of 95.5%, which shows the potential of ensemble methods in improving credit default predictions and can provide lending platforms with the tool to reduce default rates and financial losses. In conclusion, the findings from this study have broader implications for financial institutions, offering a robust approach to risk assessment beyond the Lend-ingClub dataset.

Machine learning (ML) has transformed the financial industry by enabling advanced applications such as credit scoring, fraud detection, and market forecasting. At the core of this transformation is deep learning (DL), a subset of ML that is robust at processing and analyzing complex and large datasets. This paper provides a concise overview of key deep learning models, including Convolutional Neural Networks (CNNs), Long Short-Term Memory networks (LSTMs), Deep Belief Networks (DBNs), Transformers, Generative Adversarial Networks (GANs), and Deep Reinforcement Learning (Deep RL). The study examines their learning processes, mathematical foundations, and practical applications in finance. It also explores recent advances and emerging trends in the financial industry alongside critical challenges such as data quality, model interpretability, and computational complexity, offering insights into future research directions that can guide the development of more robust and explainable financial models.

This study uses machine learning to identify key factors influencing the cost-effectiveness of over-the-counter (OTC) medications. By developing a novel cost-effectiveness rating (CER) from user ratings and prices, we analyzed data from Amazon. The findings indicate that FSA/HSA eligibility, symptom treatment range, safety warnings, special effects, active ingredients, and packaging size significantly impact cost-effectiveness across cold, allergy, digestion, and pain relief medications. Medications eligible for FSA or HSA funds, treating a broader range of symptoms, and having smaller packaging are perceived as more cost-effective. Cold medicines with safety warnings were found to be cost-effective due to their lower average price and effective ingredients like phenylephrine and acetaminophen. Allergy medications with kid-friendly features showed higher cost-effectiveness, and ingredients like calcium, famotidine, and magnesium boosted the cost-effectiveness of digestion medicines. These insights help consumers make informed purchasing decisions and assist manufacturers and retailers in enhancing product competitiveness. Overall, this research supports better decision-making in the pharmaceutical industry by highlighting factors that drive cost-effective medication purchases.

The growing shift toward Internet of Things (IoT)-based solutions expands the attack surface of systems by connecting an extensive network of heterogeneous devices and technologies. The heterogeneity of IoT devices and the scale of the network often make conventional security measures impractical. Therefore, recent research efforts have focused on machine learning (ML)-based device-agnostic IoT security solutions. However, most proposed solutions have focused solely on detecting malicious traffic in IoT networks. While this is important, further information about the attack is needed to provide a comprehensive defense before, during, and after the incident. To address this gap, we proposed an anomaly-based intrusion detection model that detects malicious traffic and identifies the attack category and subcategory with high accuracy, recall, precision, and F1-score. The proposed intrusion detection model is an ensemble model that integrates multiple ML models to produce more robust and reliable detections. For evaluation, we performed three sets of experiments: (1) a binary classification to detect malicious traffic; (2) a multi-class classification to detect the attack category; and (3) a multi-class classification to detect the attack subcategory. In the experiments, our model achieved an accuracy, recall, precision, and F1-score of 100% for the binary detection; a precision, recall, and F1-score of 99% and an accuracy of 100% for the multi-class category classification; and an accuracy, recall, precision, and F1-score of 88% for the multi-class subcategory classification. These results suggest that the proposed model can reliably detect anomalies in IoT devices.

Over the last few decades, there is a remarkable increase in air traffic worldwide; however, despite of rapid technological development and improved airport infrastructure, there is still an increasing number of aviation accidents and fatalities. In order to meet safety demands of Air Traffic Control (ATC), Machine Learning (ML) based aircraft conflict detection techniques are focused to predict events before they come to reality. This research presents a systematic literature review (SLR) about the applications of ML techniques in safety prediction of ATC system. Initially, the existing aircraft conflict prediction models are classified into three broad categories; logical, geometric and probabilistic. A formal process of SLR is then conducted which is initiated with preprocessing and effective searching. A series of filtering called title, abstract and objective-based are then applied to extract the most relevant articles. Detailed and critical reviews of selected articles are performed to identify challenges which are segregated into dataset, model and evaluation techniques, furthermore, the optimal solutions for each are proposed. Finally the matrices to map the identified challenged with their proposed solutions are constructed. This research serves as a foundation for future research and towards integration of ML based safety prediction techniques into modern ATC system.

Chronic Kidney Disease is a medical condition that causes the decrease in the kidney function and can eventually derive in a total cessation of the work of the organ. It currently affects >10% of the global population, and the number is expected to grow within the next few years, since the correlated diabetes condition is escalating too. Diagnosing the disease on its early stages is crucial to improve life quality, and to increase the chances of survival. The traditional diagnostic methods, which include a biopsy, are invasive, expensive and dangerous. With the use of machine learning algorithms like neural networks, random forest and genetic algorithms, this paper seeks to discover an algorithm with high accuracy, whose selected attributes will be the most optimal combination aiming to reduce the cost, level of invasiveness, and easiness to obtain.

In this systematic review of the literature on using Machine Learning (ML) for credit risk prediction, we raise the need for financial institutions to use AI and ML to assess credit risk, analyzing large volumes of information. We posed research questions about algorithms, metrics, results, data sets, variables, and related limitations in predicting credit risk. We searched renowned databases to answer them and identified 52 relevant studies with the credit industry microfinance. Challenges and approaches in credit risk prediction using ML models we identified, difficulties with the implemented models such as the black box model, the need for explanatory artificial intelligence, the importance of selecting relevant features, addressing multicollinearity, and the problem of the imbalance in the input data. By answering the questions, we identified that the Boosted Category is the most researched family of ML models; the most commonly used metrics for evaluation are Area Under Curve (AUC), Accuracy (ACC), Recall, precision measure F1 (F1), and Precision; Research mainly uses public data sets to compare models, and private ones to generate new knowledge when applied to the real world. The most significant limitation identified is the representativeness of reality, and the variables primarily used in the microcredit industry are related data to the demographic, the operation, and payment behavior. This study aims to guide the developers of credit risk management tools and software towards the existing offer of ML methods, metrics, and techniques used to forecast it, thereby minimizing possible losses due to default and guiding risk appetite.

The identification of biomarkers is crucial for cancer diagnosis, understanding the underlying biological mechanisms, and developing targeted therapies. In this study we propose a machine learning approach to predict the outcome and platinum resistance status of ovarian cancer patients using public available gene expression data. Six classical machine learning algorithms are compared on their predictive performance. Those with the highest score are analyzed by their feature importance using the SHAP algorithm. We were able to select multiple genes that were correlating with the outcome and platinum resistance status of the patients and validated those using Kaplan-Meier plots. In comparison to similar approaches the performance of the models were higher and different genes using feature importance analysis were identified. The most promising identified genes that could be used as biomarkers are: TMEFF2, ACSM3, SLC4A1 and ALDH4A1.

Ankylosing spondylitis (AS) is a chronic inflammatory disorder with unknown etiology and hard to early diagnose. It’s imperative to investigate the changes in AS patients’ peripheral blood, which may contribute to the diagnosis and further understanding of AS. Common differential expressed genes between normal and AS patients in GSE73754 and GSE25101 were screened by machine learning algorithms. IL2RB and ZDHHC18 were hubgenes screened and a diagnostic model was established. C-indexes and calibration analyses suggested high prediction accuracy of the model in training and validation cohorts. The AUC values of the model in GSE73754, GSE25101, GSE18781 and GSE11886 were 0.86, 0.84, 0.85 and 0.89 respectively. Decision curve analyses suggested high net benefit by the model. Functional analysis of the differential expressed genes indicated that they were mainly clustered in processes related to immune response. Immune microenvironment analysis revealed that neutrophils were expanded and activated in AS, while some T cells were decreased. IL2RB and ZDHHC18 were potential blood biomarkers for AS and might be used for early diagnosis and a supplementary diagnostic tool to the existing methods. Our study deepened the insight into the pathogenesis of AS.

The advancement of precision medicine in medical care has led behind the conventional symptom-driven treatment process by allowing early risk prediction of disease through improved diagnostics and customization of more effective treatments. It is necessary to scrutinize overall patient data alongside broad factors to observe and differentiate between ill and relatively healthy people to take the most appropriate path toward precision medicine, resulting in an improved vision of biological indicators that can signal health changes. Precision and genomic medicine combined with artificial intelligence have the potential to improve patient healthcare. Patients with less common therapeutic responses or unique healthcare demands are using genomic medicine technologies. AI provides insights through advanced computation and inference, enabling the system to reason and learn while enhancing physician decision-making. Many cell characteristics, including gene up-regulation, proteins binding to nucleic acids, and splicing, can be measured at high throughput and used as training objectives for predictive models. Researchers can create a new era of effective genomic medicine with the improved availability of a broad range of data sets and modern computer techniques such as machine learning. This review article has elucidated the contributions of ML algorithms in precision and genome medicine.

As the development of high-throughput technologies, more and more high-dimensional or ultra high-dimensional genomic data are generated. Therefore, how to make effective analysis of such data becomes a challenge. Machine learning (ML) algorithms have been widely applied for modelling nonlinear and complicated interactions in a variety of practical fields such as high-dimensional survival data. Recently, the multilayer deep neural network (DNN) models have made remarkable achievements. Thus, a Cox-based DNN prediction survival model (DNNSurv model) , which was built with Keras and Tensorflow, was developed. However, its results were only evaluated to the survival datasets with high-dimensional or large sample sizes. In this paper, we evaluate the prediction performance of the DNNSurv model using ultra high-dimensional and high-dimensional survival datasets, and compare it with three popular ML survival prediction models (i.e., random survival forest and Cox-based LASSO and Ridge models). For this purpose we also present the optimal setting of several hyper-parameters including selection of tuning parameter. The proposed method demonstrates via data analysis that the DNNSurv model performs overall well as compared with the ML models, in terms of three main evaluation measures (i.e., concordance index, time-dependent Brier score and time-dependent AUC) for survival prediction performance.

As Artificial Intelligence (AI) technology, particularly Machine Learning algorithms, becomes increasingly ubiquitous, our abilities to understand and interpret AI and machine learning algorithms are becoming increasingly desirable. Visualization has been used as a common tool to view and understand complex machine learning processes. In this paper, we will focus on developing a general framework for the visualization of machine learning models as a scalar valued multi-dimensional function to help users understand how the models behave over different viewing spaces. We first give a formal definition of the visualization problem. Interpolation-based morphing and subspace sampling techniques are applied to generate various renderings through projections and cross-sections of the model space as 3D surfaces or heatmap images. This method will be applied to two real-world datasets and applications: the diagnosis of Alzheimer's Disease (AD) using a human brain networks dataset and a real-world benchmark dataset for predicting home credit default risks. The visualizations show that different machine learning algorithms can behave quite differently under different conditions.

Evolutionary Machine Learning (EML) has demonstrated its effectiveness in modeling various real-world application domains, including the dynamics of diseases and the creation of predictive models across diverse fields. However, the challenge of data imbalance adversely impacts the performance of EML models. While strategies involving misclassification costs or cost-sensitive learning exist to address this issue, their integration into EML has yet to be thoroughly explored. This paper aims to fill this gap by investigating the application of cost-sensitive EML for intelligent health risk prediction. More specifically, this paper delves into the utilization of cost-sensitive genetic programming (CSGP) and cost-sensitive genetic algorithms (CSGA), which are among the most widely used algorithms in the EML category. The study entails training CSGP and CSGA to predict the early onset of three chronic conditions (hypertension, diabetes, and fatty acid-related disorders) through the development of an EML model. Subsequently, the model's performance is evaluated through standard fitness functions such as sensitivity, specificity, and F1-score. From the experimental results, EML models demonstrate promising results in identifying the occurrence of chronic diseases. Further optimization of the cost-sensitive EML model holds the potential for enhanced outcomes in modeling medical problems.

Computational Fluid Dynamics (CFD)-based simulation has been the traditional way to model complex industrial systems and processes. One very large and complex industrial system that has benefited from CFD-based simulations is the steel blast furnace. The problem with the CFD-based simulation approach is that it tends to be very slow to generate data. The CFD-only approach may not be fast enough for use in real-time decision-making. To address this issue, in this work, the authors propose the use of machine learning techniques to train and test models based on data generated via CFD simulation. Regression models based on neural networks are compared to tree boosting models. In particular, several areas (tuyere, raceway, and shaft) of the blast furnace are modeled using these approaches. The results of the model training and testing are presented and discussed. The obtained R2 metrics are, in general, very high. The results look promising and may help to improve the efficiency of operator and process engineer decision-making when running a blast furnace.

Machine learning research has been able to solve problems in multiple aspects. An open area of research is machine learning for solving optimisation problems. An optimisation problem can be solved using a metaheuristic algorithm, which is able to find a solution in a reasonable amount of time. However, there is a problem, the time required to find an appropriate metaheuristic algorithm, that would have the convenient configurations to solve a set of optimisation problems properly. A solution approach is shown here, using a proposal that automatically creates metaheuristic algorithms aided by a reinforced learning approach. Based on the experiments performed, the approach succeeded in creating a metaheuristic algorithm that managed to solve a large number of different continuous domain optimisation problems. This work's implications are immediate because they describe a basis for the generation of metaheuristic algorithms in real-time.

Importance: Neuropsychiatric disorders like schizophrenia and bipolar disorder lack objective diagnostic markers, hindering accurate diagnosis and treatment. A novel approach using patient-derived cerebral organoids and digital analysis of electrophysiological recordings could provide much-needed objective biomarkers.Objective: To develop a digital analysis pipeline that can identify distinct electrophysiological signatures of schizophrenia and bipolar disorder using multi-electrode array recordings from patient-derived cerebral organoids.Design: This was an experimental study using previously published data. The study type can be classified as a case-control study, comparing cerebral organoids and 2D neuronal cultures derived from patients with schizophrenia, bipolar disorder, and healthy controls. The study utilized multi-electrode array recordings for analysis. Setting: The study was conducted in a laboratory setting using previously recorded data. Main Outcomes and Measures: The primary outcome was the accuracy of a support vector machine classifier in distinguishing between healthy control, schizophrenia, and bipolar disorder samples based on electrophysiological features extracted from the recordings. Key cellular-digital biomarkers were identified using minimum redundancy maximum relevance feature selection.Results:Our Support Vector Machine classifier achieved 95.8% accuracy in distinguishing SCZ from control samples in 2D neuronal cultures under both baseline and post-electrical stimulation (PES) conditions. For cerebral organoids, classification accuracy was 83.3% under baseline conditions, improving to 91.6% under PES when distinguishing between control, SCZ, and BPD samples. Key features for classification included channel-specific measures such as median, covariance, autocorrelation, and kurtosis of neural activity. Confusion matrices visualize classification performance, with most misclassifications occurring in the BPD class under baseline conditions. These results demonstrate that our digital analysis pipeline can effectively distinguish between healthy control and patient-derived samples using electrophysiological features from multi-electrode array recordings, particularly under PES conditions.Conclusions and Relevance: This digital analysis pipeline demonstrates the potential to identify objective electrophysiological signatures of schizophrenia and bipolar disorder using patient-derived cerebral organoids. This approach could lead to improved diagnostic accuracy and personalized treatment strategies for neuropsychiatric disorders.

This paper describes and demonstrates an autonomous robotic team that can rapidly learn the characteristics of environments that it has never seen before. The flexible paradigm is easily scalable to multi-robot, multi-sensor autonomous teams, and is relevant to satellite calibration/validation and the creation of new remote sensing data products. A case study is described for the rapid characterisation of the aquatic environment, over a period of just a few minutes we acquired thousands of training data points. This training data allowed our machine learning algorithms to rapidly learn by example and provide wide area maps of the composition of the environment. Along side these larger autonomous robots two smaller robots that can be deployed by a single individual were also deployed (a walking robot and a robotic hover-board), observing significant small scale spatial variability.

Background: Synovial sarcoma is a rare soft tissue tumor that constitutes 5-10% of all soft tissue sarcomas. Early diagnosis and risk stratification are essential for effective management. This study leverages machine learning models to improve the risk stratification of mortality in synovial sar-coma patients. Methods: This retrospective cohort study utilized data from the Surveillance, Epidemiology, and End Results (SEER) database to analyze patients diagnosed with synovial sarcoma between 2004 and 2015, as well as a validation cohort diagnosed from 2018 onward. The dataset encompassed demographic data, clinical characteristics, staging, treatment modalities, and outcomes. Four ma-chine learning models—support vector classifier (SVC), k-nearest neighbors (KNN), Gaussian naive Bayes, and gradient boosting—were trained and evaluated. Model performance was assessed using sensitivity, specificity, AUC-ROC, and Brier score. SHAP analysis was performed to determine the most influential features impacting model predictions. The top-performing model was validated using the 2018+ cohort. Results: The study included a total of 762 patients, with an average age of 39.4 years. The support vector classifier (SVC) outperformed the other models, achieving an AUC-ROC of 0.8153 (95% CI: 0.7578 to 0.8677) and a Brier score of 0.1715. Upon external validation with the 2018+ cohort, the SVC model yielded an AUC-ROC of 0.8179 (95% CI: 0.7632 to 0.8666). Key prognostic factors identified through SHAP analysis included tumor size, patient age, presence of metastasis, tumor differentiation, and cancer stage. Conclusion: Machine learning models can be used to stratify the risk of death in synovial sarcoma patients effectively, with the support vector classifier showing the most promise.

Hemoglobinopathies are a group of disorders in which the hemoglobin molecule has abnormal production or structure. The hemoglobin molecules in red blood cells (RBC) are impacted by the blood disease known as sickle cell disease (SCD), and Thalassemia is one of the major monogenic disorders that reduces hemoglobin production( Kohne et al ., 2011). This disorder results in a large number of red blood cells being destroyed, leading to anemia. India bears a huge burden of hemoglobinopathies; thalassemia is the most prevalent (Mondal SK et al., 2016). A key component of thalassemia prevention is a successful screening procedure to identify Thalassemia carriers. Effective screening programs have numerous obstacles, especially in environments with limited resources. Machine learning (ML) has been used to solve technical and domain-specific problems in a variety of prognostic and diagnostic medical jobs. In this work, we aimed to identify and analyze the most common mutation of β--thalassemia and sickle cell disease from the north Indian population by employing Machine learning-based algorithms. To accurately predict the carrier state from a simple blood test, and to predict pathogenic hemoglobin variants in a group of individuals, these results demonstrate the application of integrated bioinformatics and machine learning approaches. This study contributes to the validation of the models based on data from several individuals and hemoglobinopathies.

Using metaheuristics, such as the Evolutionary Algorithm (EA), within control structures is a realistic approach for certain optimal control problems. Their role is often predicting the optimal control values over a prediction horizon using a process model (PM). The big computational effort sometimes causes problems. Our work addresses a new issue: whether a machine learning (ML) algorithm could “learn” the optimal behaviour of the couple (EA, PM). A positive answer is given by proposing datasets apprehending this couple's optimal behaviour and appropriate ML models. Following a design procedure, a number of closed-loop simulations will provide the sequences of optimal control and state values, which are collected and aggregated in a data structure. For each sampling period, datasets are extracted from the aggregated data. The ML algorithm experiencing these datasets will produce a set of regression functions. Replacing the EA predictor with the ML model, new simulations are carried out, proving that the state evolution is almost identical. The execution time decreases drastically because the PM’s numerical integrations are totally avoided. The performance index equals the best-known value. In different case studies, the ML models succeeded in capturing the optimal behaviour of the couple (EA, PM) and yielded efficient controllers.

The prediction of system degradation is very important as it serves as an important basis for the formulation of condition-based maintenance strategies. An effective health indicator (HI) plays a key role in the prediction of system degradation as it enables vital information for critical tasks ranging from fault diagnosis to remaining useful life prediction. To address this issue, a method for monitoring data fusion and health indicator construction based on autoencoder (AE) and long short-term memory (LSTM) network is proposed to improve the predictability and effectiveness of health indicator in this study. Firstly, an unsupervised method and overall framework for HI construction is built based on deep autoencoder and LSTM neural network. The neural network is trained fully based on the normal operating monitoring data and then the construction error of the AE model is adopted as the health indicator of the system. Secondly, we propose related machine learning techniques for monitoring data processing to overcome the issue of data fusion, like mutual information for sensor selection and t-distributed stochastic neighbor embedding (T-SNE) for operating condition identification, etc. Thirdly, in order to verify the performance of the proposed method, experiments are conducted based on CMAPSS dataset and results are compared with algorithms of principal component analysis (PCA) and vanilla autoencoder model. Result shows that LSTM-AE model outperforms the PCA and Vanilla-AE model in metrics of monotonicity, trendability, prognosability and fitness. Fourthly, in order to analyze the impact of the time step of the LSMT-AE model on HI construction, we construct and analyze the system HI curve under different time steps of 5, 10, 15, 20, and 25 cycles. Finally, the results demonstrate that the proposed method for HI construction can effectively characterize the health state of system, which is helpful for further failure prognostics and converting the scheduled maintenance into condition-based maintenance.

Due to the large interest and need, there has been much recent work in epileptic seizure detection using machine learning models. Using un-intrusive measurements of brain activity such as electroencephalograms (EEG) has allowed for large datasets to be constructed and used for computational intelligence to identify seizure events within EEG data. In this paper, we use a publicly avaibale EEG dataset to develop a lightweight Machine learning supervised model (simple Decision Tree) to classify seizure events from brain waves. The performance of this developed model was compared with a complex ML model (Support Vector Machine). The cross-validated Decision Tree model performed better for seizure event classification with an overall accuracy of 91.17%. This lightweight model will allow for developing mobile applications and user comfort

Endometriosis is a complex chronic condition characteristic of chronic pelvic pain, dysmenorrhea, anxiety and fatigue. This can often lead to multimorbidity which is defined by the presence of two or more long term conditions. Delayed diagnosis of endometriosis is a crucial issue that leads to poor quality of life and clinical management. There are a variety of limitations linked to conducting endometriosis research including lack of dedicated funding. Additionally, accessing existing electronic healthcare records can be challenging due to governance and regulatory restrictions. Missing data issues are another concern that has been commonly identified among real-world studies. Considering these challenges, data science technique could provide a solution by way of using synthetic datasets that could be generated using known characteristics of endometriosis to explore the possibility of predicting multimorbidity. This study aimed to develop an exploratory machine learning model that can predict multimorbidity among women with endometriosis using real-world and synthetic data. A sample size of 1012 was used from two endometriosis specialized centres in the UK. In addition, 1000 synthetic data records per centre were generated using the widely used Synthetic Data Vault’s Gaussian Copula model based on patients’ records’ characteristics. Three standard classification models, Logistic Regression (LR), Support Vector Machine (SVM), and Random Forest (RF), were used for classification. The average accuracies for all three models (LR, SVM and RF), given as “model accuracy-centre1: accuracy-centre2” were found to be: LR 64.26%:69.04%, SVM 67.35%:68.61%, and RF 58.67%:73.76% on real-world data, and LR 69.9%:72.29%, SVM 69.39%:70.13, and RF 68.88%:74.62 on synthetic data, respectively. The findings of this report show machine learning models trained on synthetic data performed better than models trained on real-world data. Our findings suggest synthetic data holds great promise for shows value to conduct clinical epidemiology and clinical trials that could devise better precision treatments and possibly reduce the burden of multimorbidity.

This study aims to assess the feasibility of delineating and identifying mineral ores from hyperspectral images of tin-tungsten mine excavation faces using machine-learning classification. We compiled a set of hand samples of minerals of interest from a tin-tungsten mine and analyzed two types of hyperspectral images: 1) images acquired with a laboratory set-up under close-to-optimal conditions; and 2) scan of a simulated mine face using a field set-up, under conditions closer to those in the gallery. We have analyzed the following minerals: cassiterite (tin ore), wolframite (tungsten ore), chalcopyrite, malachite, muscovite, and quartz. Classification (Linear Discriminant Analysis, Singular Vector Machines and Random Forest) of laboratory spectra had a very high overall accuracy rate (98%), slightly lower if the 450 – 950 nm and 950 – 1780 nm ranges are considered independently, and much lower (74.5%) for simulated conventional RGB imagery. Classification accuracy for the simulation was lower than in the laboratory but still high (85%), likely a consequence of the lower spatial resolution. All three classification methods performed similarly in this case, with Random Forest producing results of slightly higher accuracy. The user’s accuracy for wolframite was 85%, but cassiterite was often confused with wolframite (user’s accuracy: 70%). A lumped ore category achieved 94.9% user’s accuracy. Our study confirms the suitability of hyperspectral imaging to record the spatial distribution of ore mineralization in progressing tungsten-tin mine faces.

Several methods have been tried to estimate air temperature using satellite imagery. In this paper, the results of two machine learning algorithms, Support Vector Machine and Random Forest, are compared with Multivariate Linear Regression, TVX and Ordinary kriging. Several geographic, remote sensing and time variables are used as predictors. The validation is carried out using four different statistics on a daily basis allowing the use of ANOVA to compare the results. The main conclusion is that Random Forest with residual kriging produces the best results (R$^2$=0.612 $\pm$ 0.019, NSE=0.578 $\pm$ 0.025, RMSE=1.068 $\pm$ 0.027, PBIAS=-0.172 $\pm$ 0.046), whereas TVX produces the least accurate results. The environmental conditions in the study area are not really suited to TVX, moreover this method only takes into account satellite data. On the other hand, regression methods (Support Vector Machine, Random Forest and Multivariate Linear Regression) use several parameters that are easily calculated from a Digital Elevation Model, adding very little difficulty to the use of satellite data alone. The most important variables in the Random Forest Model were satellite temperature, potential irradiation and cdayt, a cosine transformation of the julian day.

Image synthesis poses a challenging problem that researchers in computer vision and machine learning have been grappling with for several decades. Numerous machine learning techniques have emerged and proven effective in generating high-fidelity artificial images. This study breaks new ground by exploring image synthesis through generative learning using the D-Wave 2000Q quantum annealer, marking the first attempt to address the issue of generative image synthesis on a Quantum Processing Unit (QPU). Alongside executing image synthesis on the quantum annealer, this research also compares its performance with existing classical models and delves into resolving the Generative Learning Trilemma.

This study introduces a data obfuscation technique, leveraging the exponential map associated with the generators of Lie groups. Originating from quantum machine learning frameworks, our method illustrates the practical application of quantum mechanics principles in data processing. Specifically, it employs the exponential map of a generator algebra to introduce controlled noise into the data, achieving obfuscated data while preserving its utility for machine learning tasks. This strategy is shown to safeguard privacy in sensitive datasets, such as discussed medical records, and to enhance dataset volume and diversity through augmentation. Our empirical analysis, benchmarked against standard machine learning approaches, demonstrates that our method can maintain or even improve the predictive accuracy of the original data. This research highlights the potential of Lie group theory for advancing data privacy in medicine, marking a significant contribution to machine learning methodologies by offering the dual benefits of data obfuscation and enrichment. Through this synthesis of algebraic structures and machine learning, we propose new pathways for the secure and effective use of data in sensitive areas.

Artificial intelligence methods and application have recently shown great contribution in modeling and prediction of the hydrological processes, climate change, and earth systems. Among them, deep learning and machine learning methods mainly have reported being essential for achieving higher accuracy, robustness, efficiency, computation cost, and overall model performance. This paper presents the state of the art of machine learning and deep learning methods and applications in this realm and the current state, and future trends are discussed. The survey of the advances in machine learning and deep learning are presented through a novel classification of methods. The paper concludes that deep learning is still in the first stages of development, and the research is still progressing. On the other hand, machine learning methods are already established in the fields, and novel methods with higher performance are emerging through ensemble techniques and hybridization.

Breast cancer is a global concern as a leading cause of death for women. Early and precise diagnosis can be vital in handling the disease efficiently. Breast cancer subtyping based on estrogen receptor (ER) status is crucial for determining prognosis and treatment. This study uses metabolomics data from plasma samples to detect metabolite biomarkers that could distinguish ER-positive from ER-negative breast cancers in a non-invasive manner. The dataset includes demographic information, ER status, and metabolite levels from 188 breast cancer patients and 73 healthy controls. Supervised, unsupervised, and ensemble machine learning (ML) algorithms were applied to identify key metabolites associated with ER status, including Support Vector Machines (SVM), Multidimensional Scaling (MS), Logistic Regression (LR), and Ensemble learning. The most informative feature set, containing 28 biomarkers and two demographic factors, achieved an impressive 96% accuracy and an area under the curve (AUC) of 93% using the Logistic Regression model. These results suggest that ML has great promise for identifying specific metabolites linked to ER expression, paving the development of a novel analytical tool that can minimize current lab challenges such as analytical sample handling, subjective results interpretation, biological heterogeneity of the tumor in a non-invasive and efficient manner aiding in more precise diagnosis of breast cancer.

In Kenya, Rift Valley Fever (RVF) outbreaks pose significant challenges, being one of the most severe climate-sensitive zoonoses. While Machine Learning (ML) techniques have shown superior performance in time series forecasting, their application in predicting disease outbreaks in Africa remains under explored. Leveraging data from the International Livestock Research Institute (ILRI) in Kenya, this study pioneers the use of ML techniques to forecast RVF outbreaks by analysing climate data spanning from 1981 to 2010, including machine learning models. Through a comprehensive analysis of ML model performance and the influence of environmental factors on RVF outbreaks, this study provides valuable insights into the intricate dynamics of disease transmission. The XGB Classifier emerged as the top-performing model, exhibiting remarkable accuracy in identifying RVF outbreak cases, with an accuracy score of 0.997310. Additionally, positive correlations were observed between various environmental variables, including rainfall, humidity, and claypatterns, and RVFcases, underscoring the critical role of climatic conditions in disease spread. These findings have significant implications for public health strategies, particularly in RVF-endemic regions, where targeted surveillance and control measures are imperative. However, the study also acknowledges the limitations in model accuracy, especially in scenarios involving concurrent infections with multiple diseases, highlighting the need for ongoing research and development to address these challenges. Overall, this study contributes valuable insights to the field of disease prediction and management, paving the way for innovative solutions and improved public health outcomes in RVF-endemic areas and beyond.

Class Incremental Learning (CIL) has emerged as a vital machine learning paradigm, particularly suited for environments with continuous data streams, such as those encountered in the financial industry. CIL enables models to progressively acquire and accumulate new knowledge without retraining the entire dataset, making it highly efficient for dynamic financial markets. In this paper, we explore the application of CIL to financial data streams, where high-frequency, high-dimensional data, such as stock prices and cryptocurrency transactions, evolve rapidly. The challenges inherent in CIL, including catastrophic forgetting—where the model loses previously learned knowledge—and intransigence—where it resists learning new classes—are addressed through both regularization-based techniques and dynamic architecture expansion. We present a comprehensive analysis of the algorithms designed to mitigate these challenges and highlight their relevance in financial applications like algorithmic trading, portfolio management, risk assessment, and fraud detection. By demonstrating how CIL enables models to adapt to new market conditions and asset classes while retaining past knowledge, we illustrate its critical role in advancing real-time financial decision-making. Through a detailed examination of the methodologies and their applications, this paper aims to provide insights into the future of adaptive financial models using Class Incremental Learning. We have also summarized methodologies into a model optimization-based class and a data focused class.

Federated Learning (FL) represents a promising distributed learning methodology, particularly suitable for dynamic and heterogeneous environments characterized by the presence of Internet of Things (IoT) devices and Edge Computing infrastructures. In this context, FL allows you to train machine learning models directly on edge devices, mitigating data privacy concerns and reducing latency due to transmitting data to central servers. However, the heterogeneity of computational resources, the variability of network connections, and the mobility of IoT devices pose significant challenges to the efficient implementation of FL. This work explores advanced techniques for dynamic model adaptation and heterogeneous data management in edge computing scenarios, proposing innovative solutions to improve the robustness and efficiency of federated learning. We present an innovative solution based on Kubernetes which enables the fast application of FL models to Heterogeneous Architectures. Experimental results demonstrate that our proposals can improve the performance of FL in IoT and edge environments, offering new perspectives for the practical implementation of decentralized intelligent systems.

In the intersection of the Internet of Things (IoT) and Machine Learning (ML), the choice between high-level and low-level programming libraries presents a significant dilemma for developers, impacting not only the efficiency and effectiveness of ML models but also their environmental footprint. We have proposed a comprehensive framework to aid in this decision-making process, underpinned by a detailed comparative analysis of both types of libraries on one of the key IoT ML task; image classification. We have introduced a novel algorithm designed to calculate the green footprint of ML model training, factoring in execution time, memory utilization, power consumption, and CPU temperature, addressing the urgent need for sustainable ML practices. Through an empirical evaluation of popular libraries such as PyTorch for high-level and Libtorch for low-level development, we have assessed their performance, development efficiency, and hardware compatibility. The culmination of our research is a decision support system that synthesizes the experimental findings to guide developers toward choices that harmonize model performance with environmental sustainability.

Seismic vulnerability assessment in urban areas would in principle require the detailed modeling of each single building and the implementation of complex numerical calculations. This procedure is clearly difficult to apply at urban scale where many buildings have to be considered and therefore it is essential to have simplified, but at the same time reliable, approaches to vulnerability assessment. Among the proposed strategies, one of the most interesting concerns the application of machine learning algorithms, able to classify buildings according to their vulnerability on the basis of training procedures applied to existing datasets. In this paper machine learning algorithms will be applied to a dataset which collects and catalogs the structural characteristics of a large number of buildings and reports the damage observed in L’Aquila territory during the intense seismic activity occurred in 2009. A combination of a trained neural network and a random forest algorithm allows to identify an opportune “a-posteriori” vulnerability score, deduced from the observed damage, which is compared to an “a-priori” vulnerability one, evaluated taking into account characteristic indexes for building’s typologies. By means of this comparison an inverse approach to seismic vulnerability assessment, which can be extended to different urban centers, is proposed.

(1) Background: The analysis of athletic performance has always aroused great interest from sport scientist. This study utilized machine learning methods to build predictive models using a comprehensive CrossFit (CF) dataset, aiming to reveal valuable insights into the factors influencing performance and emerging trends.; (2) Methods: The study used Random Forest (RF) and Multiple Linear Regression (MLR) models to predict performance in four key weightlifting exercises within CF: clean &amp; jerk, snatch, back squat, and deadlift. Performance was evaluated using R-squared (R2) values and Mean Squared Error (MSE). Feature importance analysis was conducted using RF, XGBoost, and AdaBoost models.; (3) Results: The RF model excelled in deadlift performance prediction (R2 = 0.80), while the MLR model demonstrated remarkable accuracy in clean &amp; jerk (R2 = 0.93). Across exercises, clean &amp; jerk consistently emerged as a crucial predictor. The feature importance analysis revealed intricate relationships among exercises, with gender significantly impacting deadlift performance.; (4) Conclusions: This research advances our understanding of performance prediction in CF through machine learning techniques. It provides actionable insights for practitioners, optimize performance, and demonstrates the potential for future advancements in data-driven sports analytics.

For adolescents, high aggression is often associated with suicide, physical injury, worse academic performance, and crime. Therefore, there is a need for early identification and intervention for highly aggressive adolescents. The Buss-Warren Aggression Questionnaire (BWAQ) consists of 34 items, and the longer the scale, the more likely participants are to make an insufficient effort response (IER), which reduces the credibility of the results and increases the cost of implementation. The study aimed to develop a shorter BWAQ using machine learning (ML) techniques to reduce the frequency of IER and decrease implementation costs meantime. First, an initial version of the short-form questionnaire was determined using Stepwise Regression and ANOVA F-test. Then, a machine learning algorithm determined the optimal short-form questionnaire (BWAQ-ML). Finally, the reliability and validity of the optimal short-form questionnaire were tested using independent samples. The BWAQ-ML has 88% fewer items than the BWAQ. It has AUC, accuracy, recall, precision, and F1 scores of 0.85, 0.85, 0.89, 0.83, and 0.86, respectively, and good psychometric properties. The BWAQ-ML can effectively measure individual aggression and can be used as a simplified version of BWAQ.

Covid-19 has caused infections and deaths worldwide. While research in the field of Data Science has contributed good predictions of positive Covid-19 case numbers, this study's review of literature shows there is little research in the use of variants of the virus in predictions. We set out to define and evaluate novel variant features. We find that features relating to variant trends, thresholds and amino acid substitutions are especially powerful in two tasks. In the first task, predicting Covid-19 case numbers, accuracy improved from 71.53% without variant features to 82.12% with variant features. In the second task, predicting transmission severity of variants between two classes, we created a method to build some variable ensembles through selecting appropriate models that are generated with variant features. The test results showed that our ensembles are more accurate and reliable. One particular ensemble of 14 models correctly classified 90.91% of variants, outperforming other models including the popular Random Forest ensemble. In addition, as the variant features have represented more underlying information about Covid-19 pathophysiology, our ensemble methods use only a few data samples to achieve an accurate prediction. The ensemble of 14 models uses only 50 cases of each variant, an ability that could be exploited for early detection of highly infectious variants. These research findings may benefit public health professionals, policy makers, and the research community in the collective efforts to overcome this disease.

CVDs are a leading cause of death globally. In CVDs, the heart is unable to deliver enough blood to other body regions. Since effective and accurate diagnosis of CVDs is essential for CVD prevention and treatment, machine learning (ML) techniques can be effectively and reliably used to discern patients suffering from a CVD from those who do not suffer from any heart condition. Namely, machine learning algorithms (MLAs) play a key role in the diagnosis of CVDs through predictive models that allow us to identify the main risks factors influencing CVD development. In this study, we analyze the performance of ten MLAs on two datasets for CVD prediction and two for CVD diagnosis. Algorithm performance is analyzed on top-two and top-four dataset attributes/features with respect to five performance metrics –accuracy, precision, recall, f1-score, and roc-auc – using the train-test split technique and k-fold cross-validation. Our study identifies the top two and four attributes from each CVD diagnosis/prediction dataset. As our main findings, the ten MLAs exhibited appropriate diagnosis and predictive performance; hence, they can be successfully implemented for improving current CVD diagnosis efforts and help patients around the world, especially in regions where medical staff is lacking.

The aim of this article is to discuss the transformative amalgamation of Internet of Things and Machine Learning technologies within the domain of vegetable hydroponic systems for nutrition management. Hydroponics, being an efficient cultivation method, benefits a great deal from the precision and adaptability that machine learning algorithms can offer, along with the real-time monitoring facilitated by the devices using the Internet of Things. This study summarizes the latest research and underlines how ML and IoT may work together, focusing on nutrient optimization, plant development, and resource efficiency. The use of ML algorithms, the function of IoT devices for real-time monitoring, communication protocols, scalability issues, and implementation are among some of the key subjects of the discussion. The research indicates benefits to crop output, efficiency in using resources, and sustainability based on the case studies and the analysis of results. However, ethical problems and some complications concerning data privacy do call for responsible adoptions. The conclusion of this paper provides directions for further research and calls for more investigation into state-of-the-art machine learning approaches and scalable solutions for the re-silient and sustainable future of hydroponic agriculture. The machine learning and deep learning models introduced in this research were evaluated against contemporary studies, revealing an accuracy enhancement ranging from 1.17% to 5.25%, depending on the dataset and algorithm employed. The present study conducts a comparative analysis involving machine learning algo-rithms, indicating that among all the models, the Decision Tree and Gradient Boosting Classifier achieved an accuracy of 99.42% in the dataset by making stage-wise decisions.

This study introduces an ensemble model designed for real-time monitoring of bedridden patients.The model was developed using a unique dataset, specifically acquired for this study, that captures six typical movements. The dataset was balanced using the Synthetic Minority Over-sampling Technique, resulting in a diverse distribution of movement types. Three models were evaluated: a Decision Tree Regressor, a Gradient Boosting Regressor, and a Bagging Regressor. The Decision Tree Regressor achieved an accuracy of 0.892 and an R2 score of 1.0 on the training dataset, and 0.939 on the test dataset. The Boosting Regressor achieved an accuracy of 0.908 and an R2 score of 0.99 on the training dataset, and 0.943 on the test dataset. The Bagging Regressor was selected due to its superior performance and trade-offs such as computational cost and scalability. It achieved an accuracy of 0.950, an R2 score of 0.996 for the training data, and an R2 score of 0.959 for the test data. The study also employs K-Fold cross-validation and learning curves to validate the robustness of the Bagging Regressor model. The proposed system addresses practical implementation challenges in real-time monitoring, such as data latency and false positives/negatives, and is designed for seamless integration with hospital IT infrastructure. This research demonstrates the potential of machine learning to enhance patient safety in healthcare settings.

Since its origin in the thermodynamics of the 19th century, the concept of entropy has also permeated other fields of physics and mathematics, such as Classical and Quantum Statistical Mechanics, Information Theory, Probability Theory, Ergodic Theory and the Theory of Dynamical Systems. Specifically, we are referring to the classical entropies: the Boltzmann-Gibbs, von Neumann, Shannon, Kolmogorov-Sinai and topological entropies. In addition to their common name, which is historically justified (as we briefly describe in this review), other commonality of the classical entropies is the important role that they have played and are still playing in the theory and applications of their respective fields and beyond. Therefore, it is not surprising that, in the course of time, many other instances of the overarching concept of entropy have been proposed, most of them tailored to specific purposes. Following the current usage, we will refer to all of them, whether classical or new, simply as entropies. Precisely, the subject of this review is their applications in data analysis and machine learning. The reason for these particular applications is that entropies are very well suited to characterize probability mass distributions, typically generated by finite-state processes or symbolized signals. Therefore, we will focus on entropies defined as positive functionals on probability mass distributions and provide an axiomatic characterization that goes back to Shannon and Khinchin. Given the plethora of entropies in the literature, we have selected a representative group, including the classical ones. The applications summarized in this review finely illustrate the power and versatility of entropy in data analysis and machine learning.

In the realm of smart transportation and mobility, delivery organizations are continuously refining their strategies, harnessing resources and advanced analytical techniques to streamline operations, aiming to achieve optimal solutions in terms of both efficiency and cost-effectiveness. However, a persistent challenge faced by these delivery companies revolves around the effective assignment of delivery personnel to customer orders, often grappling with suboptimal assignments that lead to inefficiencies and delays. To address this issue, we propose an architecture that uses the Munkres algorithm to optimize the task assignment problem for delivery personnel with pending orders, employing different cost functions obtained with deterministic and machine learning techniques. We compared the performance of linear and polynomial regression methods to construct different cost functions represented by matrices with orders and delivery people information. Subsequently, we applied the Munkres optimization algorithm to solve the assignment problem, which optimally assigns delivery people and orders. The results demonstrate that linear regression, used to estimate distance information, can reduce estimation errors by up to 568.52 km (1.51%) for our dataset compared to other methods. Conversely, polynomial regression proves effective in constructing a superior cost function based on time information, reducing estimation errors by up to 17,143.41 minutes (11.59%) compared to alternative methods. The proposed approach aims to enhance delivery personnel allocation within the delivery sector, optimizing the efficiency of this process.

The spread of high-performance personal computers, frequently equipped with powerful Graphic Processing Units (GPU), raised the interest on a set of techniques able to extract models of electromagnetic phenomena (and devices) directly from available examples of the desired behavior. Such approaches are collectively referred to as Machine Learning (ML). A typical representative ML approach is the so called “Neural Network” (NN). Using such data-driven models allows evaluating the output in a much shorter time when a theoretical model is available, or allows predicting the behavior of the systems and devices when no theoretical model is available. With reference to a simple yet representative benchmark electromagnetic problem, some of the possibilities and the pitfalls of the use of NN for the interpretation of measurements (inverse problem) or to obtain the required measurements (optimal design problem) are discussed. The investigated aspects include the choice of the NN model; the generation of the dataset(s); the selection of hyperparameters (hidden layers, training paradigm). Finally, the capabilities in the handling of ill-posed problems are critically revised.

Disease surveillance is critical to monitor ongoing control activities, detect early outbreaks and to inform intervention priorities and policies. Unfortunately, most data from disease surveillance remain under-utilised to support decision-making in real-time. Using the Brazilian Amazon malaria surveillance data as a case study, we explore unsupervised anomaly detection machine learning techniques to analyse and discover potential anomalies. We found that our models are able to detect early outbreaks, peak of outbreaks as well as change points in the proportion of positive malaria cases. Specifically, the sustained rise in malaria in the Brazilian Amazon in 2016 was flagged by several models. We also found that no single model detects all the anomalies across all health regions. The approaches using Clustering-based local outlier algorithm ranked first before Principal component analysis and Stochastic outlier selection in maximising the number of anomalies detected in local health regions. Because of this, we also provide the minimum number of machine learning models (top-k models) to maximise the number of anomalies detected across different health regions. We discovered that the top-3 models that maximise the coverage of the number and types of anomalies detected across the 13 health regions are: Principal component analysis, Stochastic outlier selection and Multi-covariance determinant. Anomaly detection approaches provide interesting solutions to discover patterns of epidemiological importance when confronted with a large volume of data across space and time. Our exploratory approach can be replicated for other diseases and locations to inform timely interventions and actions toward endemic disease control.

Cancer is a major concern for people, and accurately predicting the probability of cancer incidence and mortality is an important research topic. With the development of big data and artificial intelligence technology, a new machine learning model has emerged. Using 72,591 pieces of data, including age, case count, population size, race, gender, site of onset, and year of discovery, we built a machine learning model. Through calculations, we found that the decision tree, random forest, logistic regression, support vector machine, and neural network achieved testing accuracies of 62.11%, 61.68%, 54.53%, 55.72%, and 63.10%, respectively. With the help of this model, scientists and policymakers can accurately predict future cancer incidence and mortality rates through databases, allowing them to make relevant policies (such as timely allocating doctors and medical resources) to better serve the people.