The purpose of this article is to analyze, in a three-stage research, the relationships between environmental expenses, the improvements achieved in 5 environmental variables analyzed and efficiency, from an economic and operational perspective. The stages of this research are analyzing the sustainability reports to determine the level of information, analyzing the economic and operational efficiency, and analyzing the alignment with the environmental priorities of the Eco Ports-ESPO (European Sea Ports Organization). The results reveal that (1) the type of traffic does not condition environmental actions; (2) environmental performance (improvements) depends on environmental expenditures; (3) environmental spending and efficiency in port operations are correlated; and (4) environmental spending and port economic efficiency are correlated.

Climate variation and change are an unavoidable phenomenon faced by the natural habitat of this planet. For getting potential yield from vegetable crops under the changing climate conditions, the practical strategies at field level can serve as a guideline for the farmers. Moreover, there are several strategies available for mitigating the harmful effects of climate change. In this manuscript, efforts have been made for reviewing the mitigating strategies against the impact of climate change in vegetable crops via conventional approaches. Considering the situation, the information reviewed revealed that significant result of conventional approaches with climate-smart adoptions strategies has a direct bearing on vegetable production for the increasing population in frenziedly changing climate scenario.

Recent prolonged dry periods and lack of irrigation water have severely affected the productivity of coffee farms’ in the Central Highlands of Vietnam. This paper analyzes the efficiency of irrigation water use for Robusta coffee (Coffea canephora) in Lam Dong province, Highlands, Vietnam. A Cobb-Douglas production function was used to determine coffee productivity’s response to the application of irrigation water and other production factors using data collected from 194 farmers while the Technical Efficiency (TE) and Irrigation Water Use Efficiency (IWUE) were analyzed using a Data Envelopment Analysis (DEA) model. The correlation of different factors to IWUE was determined using the Tobit model. The production function analysis using Cobb-Douglas shows that the volume of irrigation water, amount of working capital, labor and farm size significantly influence coffee productivity. It also shows that indigenous farmers are more efficient in utilizing irrigation water than the (mostly Kinh) migrant farmers. The Tobit result, on the other hand. indicates that farmers’ experience, education level, distance of farm to water source, security of access to water source, extension contact and credit access significantly affect IWUE. The study findings further suggest that mitigating water shortages in coffee farms require sub-regional and national policy support such as better access to credit and extension services, training, land management and household-level effort to improve farming practices, through the application of appropriate technologies and traditional knowledge.

In 2015, the new installed capacity of global renewable energy power generation exceeded the newly installed capacity of conventional energy power generation, marking a structural change in the construction of the global power system. With the continuous improvement of wind energy utilization technology, the global wind power industry has developed rapidly in recent years. The world's available wind energy is 20 billion kilowatts and has become one of the most economical green power. In China, wind power has become the third largest source of electricity, with the installed capacity increasing from 3.1% in 2010 to 9.2% in 2017. In 2017, China's new installed capacity was 19,660 MW, accounting for 37.45% of the world's new installed capacity. This paper evaluates and compares the efficiency of wind power industry in the four regions of eastern, central, western and northeastern China through EBM models based on radial and non-radial factors. This paper discusses the contribution of China's wind power industry to CO2 emission reduction from the relationship between installed capacity efficiency and CO2 emission reduction efficiency. The conclusions show that the overall efficiency score and ranking of wind power in 2013-2017 is the best in the eastern region, followed by the northeast region and the western and central regions.

Considering the manufacturing of automotive components, there exists a dilemma around the substitution of traditional Cast Iron (CI) with lighter metals. Nowadays, aluminium alloys, being lighter compared to traditional materials, are considered as a more environmentally friendly solution. However, the energy required for the extraction of the primary materials and manufacturing of components is usually not taken into account in this debate. In this study, an extensive literature review has been performed to estimate the overall energy required for the manufacturing of an engine cylinder block using (a) cast iron and (b) aluminium alloys. Moreover, data from over 100 automotive companies, ranging from mining companies to consultancy firms, have been collected in order to support the soundness of this investigation. The environmental impact of the manufacturing of engine blocks made of these materials is presented with respect to the energy burden; the “cradle-to-grave approach” has been implemented to take into account the energy input of each stage of the component lifecycle starting from the resource extraction and reaching to the end-of-life processing stage. Our results indicate that although aluminium components contribute towards reduced fuel consumption during their use phase, the vehicle distance needed to be covered in order to compensate for the up-front energy consumption related to the primary material production and manufacturing phases is very high. Thus, the substitution of traditional materials with lightweight ones in the automotive industry should be very thoughtfully evaluated.

High intrinsic water use efficiency (WUEi), the ratio of leaf photosynthesis to stomatal conductance, may be a useful trait in adapting crops to water-limited environments. Carbon isotope ratios can be a useful indicator of WUEi, but might not be well correlated with it if the plants compared differ substantially in mesophyll conductance. In this study, six cultivars of soybeans previously shown to differ in WUEi in indoor experiments were grown in the field in Beltsville, Maryland, and mid-day WUEi was measured on nine clear days during mid-seasons of two years. Measurement dates were chosen for diverse temperatures, and air temperatures ranged from 21 to 34 oC on the different dates. Corrected carbon isotope delta values for 13C (CID) were determined on mature, upper canopy leaves harvested during early pod filling each year. WUEi differed among cultivars both years and the differences were consistent across measurement dates. Correlations between mean WUEi and CID were not significant in either year. It is concluded that consistent cultivar differences in WUEi exist in these soybean cultivars under field conditions, but that carbon isotope ratios may not be useful in identifying them.

Alterations in root morphology and physiology are important strategies in plants to adapt to low-phosphorus (P) environments. Maize genotypes differed in nitrogen (N) efficiency may also respond differently to low P stress. This study aimed to investigate the responses of root morphological and physiological traits of these two maize cultivars to P deficit and how these traits were linked with the acquisition of soil P. Two maize cultivars, XY335 (N efficient) and ZD958 (N inefficient), were cultivated for 40 days in a calcareous loamy soil amended with (high P) or without (low P) P. Functional root traits were used to evaluate the morphological and physiological responses to low P supply. Two separate short-term experiments determined the correlation between P uptake rate and P supply intensity (hydroponic) or root hair length under two P treatments (rhizobox). Low P status significantly simulated biomass allocation to roots, specific root length and exudations of carboxylates, while decreased root diameter and rhizosphere pH in both maize cultivars. Two cultivars had different total root length and root surface area under low P stress: increased in ZD958 and decreased in XY335. Both genotypes developed longer root hair under P deficit. ZD958 (greater biomass and shoot P content) has a greater capability at accessing soil P than XY335. Rhizosphere exudation of citric acid was significantly higher in ZD958 than in XY335, while there was not significant genotypic difference in rhizosphere pH and exudation of malic acid and acid phosphatase activity. ZD958 had higher P uptake rate than XY335 when solution P was between 12.5 and 250 µM. This study identified ZD958 as a P-efficient genotype, which better adapted to low P stress by altering root physiological traits (exudation of citric acid and P uptake rate), rather than root morphological traits (total root length, root surface area, root hair length). Our results highlight the importance of analyzing root morphological and physiological traits to enhance our understanding of the physiological mechanisms of P acquisition.

On the eve of the Brexit process, in the context of a rising Euroscepticism that fuels the modest confidence of European citizens in their national and European institutions, the article assesses the efficiency and effectiveness of the European Parliament within the framework of the ordinary legislative procedure (co-decision). After defining and formulating the main indicators, the paper analyses the micro- and macro-performance of the European Parliament within the decision-making process from a quantitative-qualitative and a qualitative-quantitative perspective, highlighting the relativizing factors and the responsiveness of the European decision-making process to the Europeans’ needs.

Heat emitters constitute the primary devices used in space heating and cover a fundamental role in the energy efficient use of buildings. In the search for an optimized design, heating devices should be compared with a benchmark emitter with maximum heat emission efficiency. However, such an ideal heater still needs to be defined. In this paper we perform an analysis of heat transfer in a European reference room, considering room side effects of thermal radiation and computing the induced operative temperature both analytically and numerically. By means of functional optimization, we analyse trends such as the variation of operative temperature with radiator panel dimensions, finding optimal configurations. In order to make our definitions as general as possible, we address panel radiators, convectors, underfloor (UFH) and ceiling heater. We obtain analytical formulas for the operative temperature induced by panel radiators and identify the 10-type as our ideal radiator, while the UFH provides the best performance overall. Regarding specifically UFH and ceiling heaters, we find optimal sizes that identify the according ideal emitters. The analytical method and quantitative results reported in this paper can be generalized and adopted in most studies concerning the efficiency of different heat emitter types in building enclosures.

Due to the fact that irrigation networks are water and energy-hungry and that both resources are scarce, many strategies have been developed to reduce this consumption. Otherwise, solar energy sources have become a green alternative with lower energy costs and, as a consequence, lower environmental impacts. In this work, it is proposed a new methodology to select the scheduled program for irrigation which minimizes the number of photovoltaic solar panels to be installed and which better fits energy consumption (calculated for discrete potential combinations; using a programming software to assist) to available energy obtained by panels without any power conditioning unit. So, the irrigation hours available to satisfy the water demands are limited by sunlight, the schedule type of irrigation has to be rigid (rotation predetermined) and the pressure at any node has to be above the minimum pressure required by standards. A real case study has been performed.

In this work a research on pulsed electrochemical micromachining of Stainless Steel is presented. A suitable equipment to study the process is described as well as a fitting procedure to machine and measure the variables involved. A tool of Tungsten with a tip of about 5 mm diameter sunk in an electrolyte of NaNO₃ is used for the process. The pulse on-time must be maintained in the order of ns to achieve a good current confinement, since the tool is active. Some experiments were made to assess the most important variables of the process, as current confinement, surface roughness, material removal rate and efficiency. It is observed that the current confinement get worse when the pulse on-time increases, as well as surface roughness. The material removal rate and the efficiency increase with the voltage amplitude and the pulse on-time. The voltage amplitude must be higher than 12 V so that the phenomenon of passivation disappears. There is a compromise in the choice of the variables, so a suitable combination of parameters is determined so that a good material removal rate with an acceptable result is achieved.

The aerodynamic efficiency of a NACA 0012 AR 4 wing was affected through periodic contours aligned in the flow direction resembling a “wrinkled” texture. Streamwise and cross-stream Particle Image Velocimetry (PIV) were conducted at the University of Dayton Low Speed Wind Tunnel (UD-LSWT) around Reynolds number of 135,000 on the NACA 0012 AR 4 wing with and without surface contours. Wings with 6 contour sections was designed by spline fitting two NACA 0012 airfoil profiles in the spanwise direction. Both 2D (wall-to-wall model) configuration and 3D configuration of the wings were tested to determine the effects of surface contours on the parasite and induced drag of the wing. Streamwise PIV results indicated an increase in momentum deficit in the wake of the mid-contour region due to enhanced boundary layer separation from the upper surface of the mid-contour region. The cross-stream PIV results indicated a decrease in the magnitude of azimuthal velocity, circulation and RMS quantities in the wingtip vortex with the surface contours. The reduction in the wingtip vortex properties indicates that the contours were effective in blocking the spanwise flow feeding into the wingtip vortex on the surface of the wing

This study assessed the hydrological performance and runoff water quality of 12 green roof (GR) modular systems located at the Universidad de los Andes campus (Bogotá, Colombia). Based on 223 rainfall events spanning a 3-year period, average rainfall retention was 85% (SD = 25%). T-tests, Welch Test, multiple linear regressions and correlation analysis were performed in order to assess the potential effect of air temperature, substrate type, vegetation cover, relative humidity, antecedent dry weather period (ADWP), rainfall duration and rainfall maximum intensity. In some cases, GR design variables (i.e. growing media and type of vegetation) were found to be significant for describing rainfall retention efficiencies and, depending on the GR type, some hydrological variables were also correlated with the rainfall retention. Rainfall and GR runoff were monitored for Total Kjeldahl Nitrogen (TKN), Nitrates, Nitrites, Ammonia, Total Phosphorus (TP), Phosphates, pH, Total Dissolved Solids (TDS), Total Suspended Solids (TSS), Color, Turbidity, Biological Oxygen Demand (BOD), Chemical Oxygen Demand (COD), Total Coliforms, metals and Poliaromatic Hydrocarbons (PAHs). The results obtained confirmed that GR systems have the ability to neutralize pH, but are source of the rest of the aforementioned parameters, excluding PAHs (with concentrations below detection limits), Ammonia, TSS, Se and Li, where differences with reference values (rainfall and plastic panel runoff) were not statistically significant. Substrate type, event size and rainfall regime are relevant variables for explaining runoff water quality.

This research presents alternative solutions for an Energy Efficiency Management System (EEMS) serving as a framework for optimizing the energy consumption algorithm and lowering energy consumption. First, a monitoring Wireless Sensor and Actuator Network (WSAN) is used for sensing, measuring, gathering data, and modeling all the dynamic disturbance parameters of the rooms in the building. Second, integrated software for metering and controlling the processes of digital data flow is used. Third, an alternative solution is proposed to reduce energy consumption. The primary benefits of this system are real-time monitoring; rapid, alternative solutions; and the ability to make a prudent decision on how to lower energy consumption. The system shows instant and accumulated solutions for short and long-term time planning. The solutions identified can be implemented in the same buildings under the same circumstances. The universities of Majmaah and Philadelphia have buildings with similar infrastructure. The system was applied to the buildings at Philadelphia University. The results were generalized to both universities. After implementation, the energy consumption of the EEMS using WSAN (based on the monitoring was reduced up to 23% when compared to that of the initial state.

This article proposes a new photovoltaic (PV) solar tracker design based on the advantage that installation latitude offers according to efficiency in function of orientation (EFO) of PVs. First, is described a methodology to let incorporate a low-precision, low-cost and high-availability solar tracking mechanism and control system. The design methodology considers the installation location (latitude and azimuth) as a starting point for establishing an adequate angular range of EFO, simultaneity the aspects of available technology and the knowledge accords to developer. Finally, the design technique is experimentally validated by the implementation of a solar tracker at latitude of 28° longitude of 109° and evaluates the efficiency on a specific day. According to result the feasibility of this type of solar tracker for latitudes close to or greater than 30° is highlighted, given that this tracking system costs 30% less than traditional commercial systems as slew drive with its incorporation of lower-resolution azimuth tracking mechanisms. It also increases collection efficiency by 26%, just as continuous or time-based dual-axis solar trackers do, without the more complex controls and mechanisms of these designs.

Material efficiency is a key element of new thinking to address the challenges of reducing impacts on the environment and of resource scarcity, whilst at the same time meeting service and functionality demands on materials. Directly related to material efficiency is the concept of the Circular Economy, which is based on the principle of optimising the utility embodied in materials and products through the life cycle. Whilst steel, as a result of high recycling rates, is one of the most ‘circular’ of all manufactured materials, significant opportunities for greater material efficiency exist, which are yet to be widely implemented. In the field of Life Cycle Management, Life Cycle Assessment (LCA) is commonly used to assess the environmental benefits of recovering and recycling materials through the manufacturing supply chain and at end-of-life. As well as containing information to calculate environmental impacts, LCA models also provide the flows of materials through the product life cycle and can also be used to quantify material efficiency and the circularity of a product system. Using an example taken from renewable energy generation, this paper explores the correlation between product circularity and the environmental case for strategies designed to improve material efficiency. An LCA-based methodology for accounting for the recovery and re-use of materials from the supply chain, and at end-of-life, is used as the basis for calculating the carbon footprint benefits of five material efficiency scenarios. Resulting carbon footprints were then compared with a number of proposed material circularity indicators. Two conclusions from this exercise were that i) LCA methodologies based around end-of-life approaches are well placed for quantifying the environmental benefits of material efficiency and circular economy strategies and ii) when applying indicators relating to the circularity of materials these should also be supported by LCA studies.

In this study, the efficiencies of flat-plate and U-tube solar collectors were investigated experimentally when an Al₂O₃ nanofluid was used as a working fluid and compared to those of solar collectors using water. The energy saving and CO₂ and SO₂ generated were calculated and compared to those of solar collectors using water. In addition, based on the experimental results, an economic analysis of the use of solar collectors in various countries was performed. As the concentration of the Al₂O₃ nanofluid increased, the performance of the solar collector improved. The highest efficiency for the solar collectors was shown at the concentration of 1.0 vol% with the nanoparticle size of 20 nm. The maximum efficiencies of the flat-plate and U-tube solar collectors using 1.0 vol%-Al₂O₃ nanofluid with 20-nm nanoparticles was 74.9% and 72.4%, respectively, when the heat loss parameter was zero. The efficiencies of the flat-plate and U-tube solar collectors using Al₂O₃ nanofluid were 14.8% and 10.7 higher, respectively, than those using water. When 50 EA flat-plate solar collectors were operated for one year using Al₂O₃ nanofluid, the coal use, generated CO₂, and generated SO₂ were 189.99 kg, 556.69 kg, and 2.03 kg less than those of solar collectors using water, respectively. In addition, the largest electricity cost reduction was in Germany.

Sustainability of current energy policies and known mid-term policies are analised in their multiple facets. First an overview is given about the trend of global energy demand and energy production, analysing the share of energy sources and the geographic distribution of demand, on the basis of statistics and projections published by major agencies. The issue of sustainability of the energy cycle is finally addressed, with specific reference to systems with high share of renewable energy and storage capability, highlighting some promising energy sources and storage approaches.

In Ghana, about 73% of households rely on solid fuels for cooking. Over 13,000 annual deaths are attributed to exposure to indoor air pollution from inefficient combustion. In this study, assessment of thermal efficiency, emissions and total global warming impact of three cookstoves commonly used in Ghana was completed using IWA water boiling test (WBT) protocol. Statistical averages of three replicate tests for each cookstove were computed. Thermal efficiency results were: wood-burning cookstove 12.2% (Tier 0), traditional charcoal cookstove 23.3% (Tier 1-2) and improved charcoal cookstove 30% (Tier 2-3). The wood-burning cookstove emitted more CO, CO2 and PM2.5 than charcoal cookstove (coalpot) and improved cookstove. Emission factor for PM2.5 and emission rate for the wood-burning cookstove (Tier 0) were over four times higher than the traditional charcoal cookstove (Tier 3) and improved cookstove (Tier 2). On the basis of WBT, annual global warming impact potential for emissions are estimated at 4 tonnes of CO2e for the wood-burning cookstove, 1.5 tonnes of CO2e for charcoal cookstove (coalpot) and 1 tonne of CO2e for improved cookstove. We conclude that there is the need for awareness, policy and incentives to enable end-users switch to improved cookstoves for increased efficiency, reduced emissions/global warming impact.

. In this article, a search for a calculation method and an analysis of performance indicators of mutual investment funds is carried out. Many factors can influence the return on investments in portfolio investments, which makes the choice of the fund incredibly difficult. However, in addition to the fact that it is difficult to determine which indicators should be given more attention and which should be omitted, it is not so easy to get these data. Some of them are publicly available on the Internet, while others can only be found in trading systems that are not accessible to people outside of this area. The article proves that a well-trained neural network can easily find existing patterns between risk and expected return on investment. It is a well-trained neural network that provides the ability to use the "what-if" function to justify your choice on real factors, as well as the ability to download available data and calculate the estimated income and its changes. This makes it much easier to choose a Fund, especially for inexperienced investors. The article also presents the results of a study of the dependence of estimated income on correlation, standard deviation, and volatility using a trained neural network. According to the theory, higher values of these three factors correspond to a higher amount of income. The obtained graphs of the calculated income dependence on correlation, standard deviation, and volatility confirmed the correctness of the neural network training and compliance with the relations described in the theory. The paper presents graphs of the dependence of the estimated income on the beta and alpha coefficients. The higher the beta and alpha indicators, the higher the expected return on investment. This corresponds to the dependency accepted in the model. When the values of the beta and alpha coefficients increase, the income also increases, which is completely consistent with the theory.

In this article, a search for a calculation method and an analysis of performance indicators of mutual investment funds is carried out. Many factors can influence the return on investments in portfolio investments, which makes the choice of the fund incredibly difficult. However, in addition to the fact that it is difficult to determine which indicators should be given more attention and which should be omitted, it is not so easy to get these data. Some of them are publicly available on the Internet, while others can only be found in trading systems that are not accessible to people outside of this area. The article proves that a well-trained neural network can easily find existing patterns between risk and expected return on investment. It is a well-trained neural network that provides the ability to use the "what-if" function to justify your choice on real factors, as well as the ability to download available data and calculate the estimated income and its changes. This makes it much easier to choose a Fund, especially for inexperienced investors. The article also presents the results of a study of the dependence of estimated income on correlation, standard deviation, and volatility using a trained neural network. According to the theory, higher values of these three factors correspond to a higher amount of income. The obtained graphs of the calculated income dependence on correlation, standard deviation, and volatility confirmed the correctness of the neural network training and compliance with the relations described in the theory. The paper presents graphs of the dependence of the estimated income on the beta and alpha coefficients. The higher the beta and alpha indicators, the higher the expected return on investment. This corresponds to the dependency accepted in the model. When the values of the beta and alpha coefficients increase, the income also increases, which is completely consistent with the theory.

This study investigates the integration of natural intelligence (NI) and artificial intelligence (AI) within traditional firms, proposing a multilayer network framework to enhance economic value. The research explores the central question: How can the integration of NI and AI, facilitated by copula nodes, drive economic value creation in digitized firms? Through empirical testing across multiple industries—namely manufacturing, retail, and finance—the study evaluates the cost-benefit improvements associated with AI adoption. The findings reveal substantial efficiency gains, improved decision-making, and notable cost reductions, validating the proposed model's predictions. The study emphasizes the critical role of copula nodes in optimizing interactions between NI and AI, ensuring that their integration yields maximum economic benefits. By providing a novel framework for quantifying AI's economic impact within digitized firms, this research fills a significant gap in the literature on multilayer networks and intelligent systems. The practical implications are profound, offering a strategic pathway for firms to enhance profitability and competitiveness in the digital age.

This study explores the barriers to adopting green supply chain practices from the perspective of industry leaders. By conducting qualitative interviews with key decision-makers in various sectors, the research uncovers the complexities and challenges faced in integrating sustainable practices into supply chain operations. The findings highlight significant obstacles such as cost implications, lack of regulatory support, technological limitations, and resistance to change within organizations. Additionally, the study reveals that while there is a growing awareness and commitment towards sustainability, practical implementation remains fraught with difficulties. The insights gained from industry leaders provide a nuanced understanding of the multifaceted nature of these barriers, offering valuable guidance for businesses and policymakers aiming to promote greener supply chains.

This paper presents a comprehensive cost-benefit analysis of producing alternative phosphorus (P) fertilizers from recycled water treatment residuals (Fe-WTR) and cowshed effluents, under the umbrella of circular economy approach. Fe-WTR is compared to a synthetic adsorbent, layered double hydroxide (LDH). Dairy wastewater is used as a P source for both adsorbents. The cost of 1 ton P-Fe-WTR sums up to 329 Euro. In contrast, the use of synthetic adsorbents (P-LDH) incurs significantly higher costs, amounting to 3329 Euros per ton, underscoring the economic advantage of utilizing waste-derived materials. Adopting Fe-WTR fertilizer not only offers substantial cost savings by avoiding landfill fees (40-150 Euros per ton) and wastewater discharge fines (500 Euros per ton) but also reduces environmental impacts. This sustainable method mitigates eutrophication and pollution, presenting a dual benefit of cost-effectiveness and environmental protection. Although our results are based on a specific case study, they reflect the potential value of extending the circular economic approach to P production worldwide: Recycling P from waste streams can be economically viable and environmentally preferable at large, aligning with global sustainability goals and demonstrating the practicality of circular economy principles in environmental management.

We analyze a time-delayed SIQR model that considers the transportation-related infections and entry-exit screening. This model aims to determine the measures for preventing and controlling major emergent infectious diseases and the associated costs. We calculate the basic reproduction number (R0), apply the linearization method, and construct an appropriate Lyapunov function to determine the stability of the disease-free equilibrium in the local and global. We collect COVID-19 infection data from two regions in the United States in 2020 for data fitting, obtain a set of optimal parameter values, and show that the model is suitable for simulating the outbreak and spread of emerging infectious diseases. We find that transportation-related infections increase the basic reproduction number, enhancing the impact on disease spread. Entry-exit screening effectively suppress the spread of disease by reducing the basic reproduction number. Furthermore, we investigate the influence of the incubation period on disease and find that a shorter incubation period results in a shorter duration but a larger scale of infection, and the peaks are reduced. We conduct a sensitivity analysis of the R0 and propose three measures to prevent the spread of new infectious diseases based on the most sensitive parameters: wearing masks, implementing urban closures, and administering medication to sick but not yet hospitalized patients promptly. In the case of COVID-19, we use Pontryagin’s minimum principle to get time-varying control measures to control the spread of the outbreak. Optimal control effectively controls the development and deterioration of the disease. Finally, several control measures are compared through cost-effectiveness analysis, and the results show that wearing masks is the most cost-effective measure. Our study provides some practical guidance for controlling the spread of major emerging infectious diseases.

We aimed to directly compare the cost-effectiveness of the NELSON and NLST screening protocols, two trials influencing lung cancer screening implementation internationally. A decision-analytic model analyzing the cost-effectiveness of the NELSON protocols was manipulated to reflect the protocols of the NLST, while maintaining features specific to the Hungarian healthcare setting. In the NELSON protocol, there are three possible outcomes to the initial round of screening: positive, negative, or indeterminate, indicating an uncertain degree of suspicion for lung cancer. This pro-tocol differs from the NLST protocol, in which the only possible screening outcomes are positive or negative, with no indeterminate option. The NLST pathway for smokers aged 55-74 resulted in a 43 € increase in total average lifetime costs compared to the Hungarian screening pathway and re-sulted in a lifetime gain of 0.006 QALYs. The incremental costs and QALYs yield an ICER of 7875 €/QALY. Our results demonstrate that assigning any suspicious LDCT screen as a positive result (NLST protocol) rather than indeterminate (NELSON protocol) can yield a slight QALY gain that is worth the additional use of resources according to Hungary’s willingness to pay threshold. Our study provides insight on the cost-effectiveness, advantages, and disadvantages of various LDCT screening protocols for lung cancer and can assist other countries as they implement their screening programs.

This paper investigates the impact of debt financing on dividend payments when they face the agency costs of free cash flow. Focusing on a sample of 120 firms listed on the Saudi Stock Exchange during the period 2011-2021. The study found a negative association between agency cost of free cash flow and dividend payment. More importantly, our research highlights the significant role of long-term debt in making more prudent use of free cash flow. The obligation to meet interest and principal payments acts as an incentive for them to steer clear of unprofitable expenses and risky investments. Concurrently, long-term debt imposes restrictive clauses in debt contracts, such as minimum dividend distribution requirements, which further encourage higher dividend payments. Since interest and debt repayments are fixed obligations, using free cash flow for dividend disbursement is considered a more profitable and beneficial approach for shareholders in the context of Saudi Arabia.

Background: Atopic dermatitis (AD), a common dermatological condition, is often associated with significant economic and social burdens. Despite extensive studies globally, there is a gap in understanding the comprehensive impact of this condition in Romania. Objectives:This study evaluated the economic burden and quality of life impact of AD in Romania, considering both direct and indirect costs. Materials & Methods: A mixed methods cost of illness study was conducted from April to October 2023. A patient survey, expert reviews, and national health data analysis were used to assess direct medical costs (treatments, medical services), direct non-medical costs (transportation, accommodation), and indirect costs (productivity losses). Quality of life was evaluated using the EuroQol EQ-5D-5L instrument. Results: In 2022, the total cost of atopic dermatitis in Romania was 32.983.498 EUR for adults and 31.573.968 EUR for children. Adult costs included 24.534.603 EUR in direct and 8.429.884 EUR in indirect medical costs, with an average annual cost per patient of 447 EUR. Pediatric costs involved 15.026.781 EUR in direct and 16.516.410 EUR in indirect costs, averaging 290 EUR per patient annually. Conclusion: Care expenditure with AD management in Romania is substantially lower than in other countries, posing a significant economic burden, primarily driven by indirect costs. This study provides a foundation for future policy interventions and highlights the need for targeted management strategies for AD.

Considering the spectrum shortage problem of IoT devices, we introduce a collaborative spectrum sensing (CSS) framework in this paper to identify available spectrum resources, so that IoT devices can access it and meanwhile avoid causing harmful interference to the normal communication of the primary user (PU). However, in the process of the PU’s signal detection in IoT devices, the issue about the stopping time and decision cost arises. To this end, we propose a distributed cognitive IoT model, which includes two IoT devices independently using sequential decision rules to detect the PU. On this basis, we define the stopping time and cost function for IoT devices, and formulate an average cost optimization problem in CSS. To solve this problem, we further regard the optimal stopping time problem as a finite horizon problem, and solve the threshold of the optimal decision rule by dynamic programming. At last, numerical simulation results demonstrate the correctness of our proposal in terms of the global false alarm and miss detection probability, and it always achieves minimal average cost under various cost of each observation taken and thresholds.

The meaning of a good social outcome in land use transport policy/planning has been relatively underdeveloped, compared to economic and environmental sustainability goals, but this is now changing. Cities are increasingly prioritizing reducing social exclusion, with the allied intent of providing all residents with equitable access to the benefits of their city. However, in jurisdictions that use cost-benefit analysis to guide government decision-making, this poses a challenge: monetization of the benefits of reducing social exclusion is poorly developed. An evaluation gap thus confronts benefit-cost based assessment of initiatives intended to reduce social exclusion, compared to initiatives directed towards societal economic and environmental goals. This is a particular problem for public transport services that primarily enable people at risk of mobility-related social exclusion to access more opportunities in their society (social transit). The benefits of reducing social exclusion associated with these services have not been monetized, so social transit initiatives are poorly placed to argue their merits against competing initiatives where benefit monetization is more advanced (e.g., mass public transport and roads). The paper summarizes Australian research that has developed monetized measures for the value of increased trip making, bridging/bonding social capital, sense of community and several conceptions of wellbeing, and of reducing neighbourhood disadvantage, as these contribute to reducing social exclusion. New Singaporean research on the value of trip making to support reduced exclusion is also presented, affirming the Australian trip values. Trip values are then used in case study examples to show they can make a material difference to the societal worth of initiatives intended to reduce exclusion. Using these trip values, and other pathway values linked to reducing social exclusion, closes or at least substantially reduces the evaluation gap confronting social goal achievement in land use transport policy and planning, strengthening the case for reducing exclusion. These values will assist jurisdictions that are seeking to provide their residents with more equitable access to the benefits of their city.

Due to an urgent need for reducing the fast progressing climate changes, a rapid, standardized and replicable solution for the infrastructure restructuring of heat demand coverage of buildings at district and city level must be developed. As more and more communities in Europe, especially in Germany, are obligated to have plans for coverage of heat demand, city planners, energy agencies seek a tool, which will help them to design the first drafts of heating network routes, which can supply whole districts and cities with renewable energy. ArcGIS Pro Tools like Least-Cost-Path-Analysis (LCPA) and Closest Facility (CF) allow to find the shortest and “cheapest” way between the heat source and heat consumers in the analyzed areas. Starting from the community level, through the district, county, voivodeship and whole country levels, the replication of the methods for generating district heating (DH) network infrastructure can be achieved. The proposed LCPA and CF based methods help to design the most suitable and efficient DH networks in the analyzed areas. As only few open-source data input, like street networks and building footprints are needed, the methods can be implemented in all communities of the country of Poland. In this paper one example of one community of Wroclaw county, called Siechnice and surroundings is presented.

Resistance evolution during exposure to non-lethal levels of antibiotics is influenced by various stress responses of bacteria which are known to affect growth rate. Here, we aim to disentangle how the interplay between resistance development and associated fitness costs is affected by stress responses. We performed de novo resistance evolution of wild-type strains and single-gene knockout strains in stress response pathways using four different antibiotics. Throughout resistance development, the increase in minimum inhibitory concentration (MIC) is accompanied by a gradual decrease in growth rate, most pronounced with amoxicillin or kanamycin. By measuring biomass yield on glucose and whole-genome sequences at intermediate and final timepoints, we identified two patterns of how the stress responses affect the correlation between MIC and growth rate. First, single-gene knockout E. coli strains associated with reactive oxygen species (ROS) acquire resistance faster and mutations related to antibiotic permeability and pumping out occur earlier. This increases the metabolic burden of resistant bacteria. Second, the ΔrelA knockout strain which has reduced (p)ppGpp synthesis, is restricted in its stringent response, leading to diminished growth rates. The ROS-related mutagenesis and the stringent response are vulnerabilities within the fitness of resistant strains that can possibly be targeted to prevent development of resistance.

The capability of extracting information and analyze it into a common format is essential for performing predictions, comparing projects through cost benchmarking, and for having a deeper understanding of the project costs. However, the lack of standardization and the manual inclusion of the data makes this process very time-consuming, unreliable, and inefficient. To tackle this problem, a novel approach with a big impact is presented combining the benefits of data mining, statistics, and machine learning to extract and analyze the information related to railway costs infrastructure data. To validate the suggested approach, data from 23 real historical projects from the client network rail was extracted, allowing their costs to be comparable. Finally, some machine learning and data analytics methods were implemented to identify the most relevant factors allowing for costs benchmarking. The presented method proves the benefits of data extraction being able to gather, analyze and benchmark each project in an efficient manner, and deeply understand the relationships and the relevant factors that matter in infrastructure costs.

Installations of decentralised Renewable Energy Systems (RES) are becoming increasing popular as governments introduce ambitious energy policies to curb emissions and slow surging energy costs. This work presents a novel model for optimal sizing for decentralised renewable generation and hybrid storage system to create a Renewable Energy Community (REC), developed in Python. The model implements PV Solar and Wind Turbines combined with a hybrid battery and Regenerative Hydrogen Fuel Cell (RHFC). The electrical service demand is derived using real usage data from a rural island case study location. Cost remuneration is managed with an REC virtual trading layer, ensuring fair distribution among actors in accordance with the European RED(III) policy. A multi-objective Genetic Algorithm (GA) stochastically determines the system capacities such that the inherent trade-off relationship between project cost and decarbonisation can be observed. The optimal design results in an LCOE of 0.15€/kWh, reducing costs by over 50% compared with typical EU grid power, with a project IRR of 10.8%, simple return of 9.6%/year, and ROI of 9 years. Emissions output from grid only use is reduced by 72% to 69 gCO2e/kWh. Further research of lifetime economics and additional revenue streams in combination with this work could provide a useful tool for users to quickly design and prototype future decentralised REC systems.

Using the World Bank Global Findex Database for 91 countries in 2014, 2017, and 2021, we examine whether fintech levels influence bank performance and whether fintech’s interaction with GDP per capita causes differential effects on bank performance globally. Since fintech levels were already very high for rich countries when the World Bank started providing fintech development statistics in 2014, we estimate AbFintech by regressing fintech levels on GDP per capita by year. AbFintech is the difference between the fintech level and its fitted values. Then, using multiple regression analyses, we investigate the impact of AbFintech on bank performance worldwide, focusing on the differential effects of AbFintech and GDP levels on bank performance. We find AbFintech significantly increases bank performance, primarily in less developed countries. Specifically, AbFintech increases banks’ ROA in the least developed countries and net interest margin in the 75th percentile countries. Also, AbFintech decreases the cost-to-income ratio in the 75th percentile countries, while it increases the ratio in the most developed countries. AbFintech does not affect the ratio of noninterest income to total income, regardless of the level of economic development.

Spatial variation of indoor and outdoor PM2.5 within three states for a 5-year period is studied using regulatory and low-cost PurpleAir monitors. Most of these data were collected in an earlier study1 investigating the relative contribution of indoor-generated and outdoor-infiltrated particles to indoor exposures. About 260 regulatory monitors and ~10,000 outdoor and ~4,000 indoor PurpleAir monitors are included. Daily mean PM2.5 concentrations, correlations, and coefficients of divergence (COD) are calculated for pairs of monitors at distances ranging from 0 (collocated) to 200 km. We use a transparent and reproducible open algorithm that avoids use of the proprietary algorithms provided by the manufacturer of the sensors in PurpleAir PA-I and PA-II monitors. The algorithm is available on the PurpleAir API website under the name “PM2.5_alt”. This algorithm is validated using several hundred pairs of regulatory and PurpleAir monitors separated by up to 0.5 km. The PM2.5 spatial variation outdoors is homogeneous with high correlations to at least 10 km, as shown by the COD index under 0.2. There is also a steady improvement in outdoor PM2.5 concentrations with increasing distance from the regulatory monitors. The spatial variation of indoor PM2.5 indoors is not homogeneous even at distances <100 m. We document substantial differences between Federal Reference Methods (FRM) and Federal Equivalent Methods (FEM).

Currently, skin cancer is the most commonly diagnosed form of cancer in humans and is one of the leading causes of death in patients with cancer. Biopsy methods are an invasive research method and are not always available for primary diagnosis. Imaging methods have low accuracy and depend on the experience of the dermatologist. Artificial intelligence technologies can match and surpass visual analysis methods in accuracy, but they have the risk of a false negative response when a malignant pigmented lesion can be recognized as benign. One possible way to improve accuracy and reduce the risk of false negatives is to analyze heterogeneous data, combine different preprocessing methods, and use modified loss functions to eliminate the negative impact of unbalanced dermatological data. The paper proposes a multimodal neural network system with a modified cross-entropy loss function that is sensitive to unbalanced heterogeneous dermatological data. The accuracy of recognition in 10 diagnostically significant categories for the proposed system was 85.19%. The novelty of the proposed system lies in the use of cross-entropy loss when training the modified function with the help of weight coefficients. The introduction of weighting factors has reduced the number of false negative forecasts, as well as improved accuracy by 1.02-4.03 percentage points compared to the original multimodal systems. The introduction of the proposed multimodal system as an auxiliary diagnostic tool can reduce the consumption of financial and labor resources involved in the medical industry, as well as increase the chance of early detection of skin cancer.

This paper reviews the management of the COVID-19 crisis and the difficulty of cost estimation model, comparing centralized management or bureaucratic government coaction and the agile market alternative or spontaneous social coordination. This is a study of Political Economy and Health Economics from the perspective of Austrian Economics. We describe and compare the al-ternative models, which are adapted to the current crisis. The analysis is based on the theorem of the impossibility of the economic calculation under coactive systems, and other principles of economy. In this context we pay also attention to collateral problems of the centralized and coac-tive management. Finally we propose a solution based on dynamic efficiency and the constitutions of wellbeing economics

Advances in communication technologies have made the interaction of small devices, such as smartphones, wearables, and sensors, scattered on the Internet, bringing a whole new set of complex applications with ever greater task processing needs. These Internet of Things (IoT) devices run on batteries with strict energy restrictions. They tend to offload task processing to remote servers, usually to Cloud Computing (CC) in datacenters geographically located away from the IoT device. In such a context, this work proposes a dynamic cost model to minimize energy consumption and task processing time for IoT scenarios in Mobile Edge Computing environments. Our approach allows for a detailed cost model, with an algorithm called TEMS that considers energy, time consumed during processing, the cost of data transmission, and energy in idle devices. The task scheduling chooses among Cloud or Mobile Edge Computing (MEC) server or local IoT devices to better execution time with lower cost. The simulated environment evaluation saved up to 51.6% energy consumption and improved task completion time up to 86.6%.

Natural capital is the wealth of nations that give them the economic status they represent. Worldwide, vulnerable people depend on natural capital for employment, salaries, wealth, and livelihoods and, in turn, determine the developmental index of the nation to which they belong. The availability of ecological services is crucial for clean water and air, food and fodder, and agricultural development. In this short commentary, we have tried to sum up the ideas and discussions over natural capital's role in ascribing economic status to countries. We have discussed how the prosperity of humans is intertwined with the services ecosystems provide and how poor natural resource management (NRM) has adversely cost human well-being. The paper concludes that to ensure the current and future human well-being, an in-depth understanding of the services ecosystems provide, is essential.

Urban cities in sub-Saharan Africa (SSA) are faced with ambient air pollution. This is an important public health problem with models and limited monitoring data indicating high concentrations of pollutants such as fine particulate matter (PM_2.5). Going through most global air quality index maps, however, information about ambient pollution from SSA is scarce. We evaluated the feasibility and practicality of longitudinal measurements of ambient PM_2.5 using low-cost air quality sensors (Purple Air-II-SD) across thirteen locations in seven countries in SSA. Devices were used to gather data over a 30-day period with the aim of assessing the efficiency of its data recovery rate and identifying challenges experienced by users in each location. The median data recovery rate was 94% (range: 72% to 100%). The mean 24-hour concentration measured across all sites was 38 µg/m³ with the highest PM_2.5 period average concentration of 91 µg/m³ measured in Kampala, Uganda and lowest concentrations of 15 µg/m³ measured in Faraja, The Gambia. Kampala-Uganda and Nnewi-Nigeria recorded the longest periods with concentrations>250µg/m³. Power outages, SD memory card issues, internet connectivity problems and device safety concerns were important challenges experienced when using Purple Air-II-SD sensors. Despite some operational challenges, this study demonstrated that it is reasonably practicable and feasible to establish a network of low-cost devices to provide data on local PM_2.5 concentrations in SSA countries. Such data are crucially needed to raise public-, societal and policymaker awareness about air pollution across SSA.

A lot of previous research have proposed various frameworks and algorithms to optimize routes to reduce the total transportation cost, which accounts for over 70% of overall logistics cost. However, it is very hard to find the cases applied the mathematical models or algorithms to the practical business environment cases, especially daily operating logistics services like convenient stores. Most of previous research have considered the developing an optimal algorithm which can solve the mathematical problem within the practical time while satisfying all constraints such as the capacity of delivery and pick-up, and time windows. For the daily pick-up and delivery service like supporting several convenient stores, it is required to consider the unit transporting container as well as the demand, capacity of trucks, traveling distance and traffic congestion. Especially, the reusable transporting container, trays, should be regarded as the important asset of logistics center. However, if the mathematical model focuses on only satisfying constraints related delivery and not considering the cost of trays, it is often to leave the empty trays on the pick-up points when there is not enough space in the track. In this research, it has been proposed to build the mathematical model for optimizing pick-up and delivery plans by extending the general vehicle routing problem of simultaneous delivery and pickup with time windows while considering left-over cost. With the numerical experiments, it has been proved that the proposed model may reduce the total delivery cost. It may be possible to apply the proposed approach to the various logistics business which uses the reusable transporting container like shipping containers, refrigerating containers, trays, and pallets.

Cardiovascular disease (CVD) is considered to be one of the leading health issues in Thailand. CVD not only contributes to an increase in the number of hospital admissions year on year but also impacts on the rising health care expenditure for the treatment and long-term care of CVD patients. Therefore, this study is aimed at examining the impacts of risk reduction strategies on the number of CVD hospital admissions, Disability-Adjusted Life Years (DALYs) and the costs of hospitalisation. To estimate such impacts a CVD cost-offset model wasapplied using a Microsoft Excel spreadsheet. The number of the mid-year population was classified by age, gender and the CVD risk factor profiles from the recent Thai National Health Examination Survey (NHES) IV. This survey was chosen as the baseline population. The CVD risk factor profiles included age, gender, systolic blood pressure, total cholesterol, and smoking status. The Asia-Pacific Collaborative Cohort Study (APCCS) equation was applied to predict the probability of developing CVD over the next eight-year period. Estimates on the following were obtained from the model: (1.) the CVD events both fatal and non-fatal; (2.) the difference between the projected number of deaths and the actual number of deaths in that population; (3.) the number of patients who are expected to live with CVD; (4.) the DALYs from the estimated number of fatal and non-fatal events; (5.) the cost of hospital admissions. Four CVD risk strategy scenarios were investigated as follows: (1.) the do nothing scenario; (2.) the optimistic scenario; (3.) achieve the UN millennium development goal; and (4.) the worst-case scenario. The findings showed that over the next eight years there are likely to be 3,297,428 recorded cases of CVD; 5,870,049 cases of DALYs; and, approximately ฿57,000 million, ($1.9 billion), is projected as the total cost of hospital admissions. However, if the current health policy can reduce the levels of risk factors as defined in the optimistic scenario or such policy meets the specifications of the UN millennium development goal,there would be a significant reduction in the number of hospital admissions. These are estimated to be a reduction of 522,179 male and 515,416 female cases. With these results it is expected that health care costs would save approximately ฿9,000 million, ($298.3 million), for CVD and 900,000 million of DALYs over the next eight years. However, if there is an upward trend in the risk factors as predicted in the worst-case scenario, then there will be an increase of 428,220 CVD cases; consequently, DALYs cases may rise by 766,029 while the hospitalisation costs may increase by approximately ฿7,000 million, ($232.1 million). Based on our findings, reducing the levels of CVD risk factors in the population will drastically reduce: (1.) the number of CVD cases; (2.) DALYs cases; and (3.) health care costs. Therefore it is recommended that the health policy should enhance the primary prevention programs which would be targeted at reducing the CVD risk factors in the population.

This study attempts to investigate a method for creating an index from mobility data that not only correlates with the number of people who relocate to a place but also has causal influence on the number of such individuals. By creating an index based on human mobility data, it becomes possible to predict the influence of urban development on future residential movements. In this paper, we propose a method called the travel cost method for multiple places (TCM4MP) by extending the conventional travel cost method (TCM). We assume that the opportunity cost of travel time on non-working days reflects the convenience and amenities of a neighborhood. However, conventional TCM does not assume that the opportunity cost of travel time varies according to the departure place. In this paper, TCM4MP is proposed to estimate the opportunity cost of travel time with respect to the departure place. We consider such estimation to be possible due to the use of massive mobility data. We assume that the opportunity cost of travel time on non-working days reflects the convenience and amenities of the neighborhood. Therefore, we consider that the opportunity cost of travel time has a causal influence on future residential mobility. In this paper, the validity of the proposed method is tested using the smart card data of public transportation in Western Japan. Our proposed method is beneficial for urban planners in estimating the effects of urban development and detecting the shrinkage and growth of a population.

This study analyses the short-run hydro generation scheduling for the wind power differences from the contracted schedule. The approach for construction of the joint short-run marginal cost curve for the hydro-wind coordinated generation is proposed and applied on the real example. This joint short-run marginal cost (SRMC) curve is important for its participation in the energy markets and for economic feasibility assessment of such coordination. The approach credibly describes the short-run marginal costs which this coordination bears in “real life”. The approach is based on the duality framework of a convex programming and as a novelty combines the shadow price of risk mitigation capability and the water shadow price. The proposed approach is formulated as a stochastic linear program and tested on the case of the Vinodol hydropower system and the wind farm Vrataruša in Croatia. The result of the case study is a family of 24 joint short-run marginal cost curves.

To estimate the recreational value provided by the Foy’s Lake annually using the most applicable model for on-site data is the main objective of this study. Adhere to the objective of this study; Individual Travel Cost Method (ITCM) has been applied and Zero Truncated Poisson Regression Model has been found plausible among other models to estimate consumer surplus. Based on the findings of the study, an estimate of the consumer surplus or recreational benefits per trip per visitor can be recommended as BDT 5,875 or US $ 73.44 and counting the consumer surplus per trip per visitor, the annual recreational value (total consumer surplus) provided by the lake is found to be BDT 321 million or US $ 40.2 million.

Due to model errors caused by local variations in cloud precipitation processes, there are still significant uncertainties in current predictions and simulations of short-duration heavy rainfall. To tackle this problem, the effects of warming on cloud-precipitation efficiency was analyzed utilizing a weather research and forecasting (WRF) model. The analysis focused on a rainstorm corridor event that took place in July 2020. Rainstorm events from July 4 to 6 formed a narrow rain belt with precipitation exceeded 300 mm in the middle and lower reaches of the Yangtze River. Temperature sensitivity tests revealed that warming intensified the potential temperature gradient between north and south, leading to stronger upward motion on the front. It also strengthened the southwest wind, which also resulting in more pronounced precipitation peaks. Warming led to a stronger accumulation and release of convective instability energy. Convective available potential energy (CAPE) and convective inhibition (CIN) increased correspondingly with the temperature. The precipitation efficiency increased sequentially with 2℃ warming to 27.4%, 31.2% and 33.1%. Warming can affect the cloud precipitation efficiency by both promoting and suppressing convective activity, which may be one of the reasons for the enhancement of extreme precipitation under global warming. The diagnostic relationship between upward moisture flux and lower atmospheric stability during precipitation evolution was also revealed.

Agriculture is the largest sector of Nepalese economy among the south-Asian developing countries that contributed 26.98 % share of Gross Domestic Product (GDP) in the year 2018/19. The capacity to derive maximum output by per unit of resource is resource use efficiency. Resource use efficiency of a producer explains the comparison between inputs and output value. Potato is staple vegetable in every parts of Nepal. Cobb-Douglas production function is used to predict the significance of inputs in income from cash crops. Due to lack of optimum utilization of available resources in cultivation of vegetable like lack of technical knowledge, low education level, and extensive service the productivity and production is low in Nepalese economy. It ensures vegetable security in Nepal. Though, there are extensive researches on the resource use efficiency and productivity issues on agriculture, very few papers explored in the case of Sudurpaschim province of Nepal OBJECTIVE: This study had the specific purposes: (1) To identify the factors affecting in resource use efficiency and productivity of potato production (2) to utilize the resource use efficiency and productivity in potato production and (3) to show the type of returns to scale in potato production. METHODS: Applying post-positivist paradigm and quantitative causal survey research design, it explored the resource use efficiency and productivity through the semi-structured questionnaire from 140 households by random sampling. Data analysis was carried out by multiple regression model using Cobb-Douglas production function. SPSS software was used to find quantitative results. From the analysis of data using mean, and SD, t-test, analysis of variance, Durbin-Waston test, Marginal Value Product and marginal Factor cost, findings of this research was emerged. RESULTS AND DISCUSSION: The major findings: education level, extension service, farm size and pesticide cost were significant variables in potato production; seed, hired labor, Family Yard Manure and pesticide cost were overused and needed to decrease their cost for optimum allocation and there was decreasing returns to scale in production. This study emphasized on increasing education level, extensive service and farm size for optimum utilization of resources and increasing returns to scale. SIGNIFICANCE: Barriers to Indian potatoes and increasing returns to scale are only possible through protection policy of government. For optimum use of resources and increasing returns to scale, government can introduce capital intensive technique. This study can be implied in policy making and improving existing situation of agriculture, and allocating budget.

Study assessed the wind potential of three sites in Chad: Koro Toro, Salal and Nedeley. Analysis of the Weibull distribution curves reveals marked seasonal variability in wind speed, concentrated around the mean. Three models of high-power wind turbines were analyzed. At Koro Toro, the Siemens Gamesa SG 14-222 DD has a capacity factor of between 0.52 and 0.682, allowing a daily flow of pumped water of between 1.4 and 6.1 million m³. The Enercon E-126 EP4 performs slightly less well. At Salal, the Siemens Gamesa has a capacity factor of between 0.4463 and 0.6605, with a water flow rate of between 0.9 and 3.7 million m³/day. The Vestas V164-10.0 MW has a higher capacity factor (0.6327 to 0.8115) but a lower water flow rate (0.5 to 1.9 million m³/day). Enercon's performance is comparable to that of Siemens Gamesa. The Nedeley study reveals favorable conditions, with seasonal variations in wind speed and capacity factor indicating good wind potential, and maximum daily water flows of between 3 and 6 million m³. Analysis of the wind roses shows interesting potential in these towns, with a dominant east-north-easterly wind at maximum frequencies of 40%. The absence of calm winds is promising, although Nedeley and Salal have a residual presence. This study shows that the sites offer good wind potential This, enabling the production of electricity and heat.

Continuous-flow microwave heating stands out for its ability to rapidly and uniformly heat substances, making it widely applicable in chemical production. However, in practical applications, the permittivity of the heated liquid changes dramatically as the reaction progresses, affecting the efficiency and uniformity of continuous-flow heating. Herein, this work presents a novel microwave heating device based on coaxial structure for high-performance heating. Our approach commenced with the development of a multi-physical field model, incorporating a spiral polytetrafluoroethylene (PTFE) as a water channel and the coaxial waveguide as a container was established. The analysis shows that the uniform distribution of the sectional electric field of electromagnetic waves in the TEM mode within the coaxial structure can enhance heating uniformity. Then, a continuous-flow microwave heating system for different liquid loads was established, and experimental measurements were conducted. The heating efficiency for all loads exceeded 90%, which basely matched the simulation results, validating the accuracy of the model. Finally, the heating efficiency and uniformity under different permittivity loads were analyzed, as well as the impact of channel radius on heating efficiency. The device demonstrated high heating efficiency and stable heating uniformity across different loads. This continuous-flow microwave device is suitable for chemical research and production, contributing to the promotion of microwave energy applications in the chemical industry.

The modern era has numerous issues associated with power generation, especially with old fashioned combustion power plants. Since fossil fuels are primarily responsible for the emission of greenhouse gasses, there is a desperate need for adaptation and sustainability. Looking at those challenges, geothermal energy which civilization had a long time ago becomes the desirable solution. This paper aims at establishing the feasibility of geothermal power plants in meeting the challenges of energy intensity and environmental conservation. This study also illustrates that the categories of geothermal energy systems which include the dry steam, flash steam and the binary cycle power plants are capable of achieving high capacity factors, initiating feasibility studies, and have relatively low impacts on the environment. While it is likely to cost more in the initial stages of construction, geothermal power plants provide more long-term cost benefits and significantly fewer toxic emissions relative to the fossil fuel plants. Switching to geothermal energy not only means that the world will have new sources of energy in the near future but also that it will be clean and environmentally friendly. Through incremental steps, geothermal power plants may well open the door to a full energy source infrastructure for subsequent generations.

This study investigates the adoption of blockchain technology in supply chain management, focusing on its transformative potential, challenges, and strategic implications. Blockchain, characterized by its decentralized and immutable ledger, offers significant benefits in enhancing transparency, efficiency, and trust among supply chain stakeholders. It enables accurate tracking of products, verification of provenance, and streamlined processes through smart contracts, which reduce the need for intermediaries and minimize operational costs. The research explores various sectors, highlighting how blockchain can address issues of counterfeiting, compliance, and sustainability by providing verifiable information about products' origins and handling. However, the adoption of blockchain is not without challenges. The technological complexity involved in integrating blockchain with existing systems, the need for specialized skills, and concerns over data privacy and security pose significant barriers. Additionally, the lack of regulatory clarity and the high initial costs associated with blockchain infrastructure present further obstacles, particularly for small and medium-sized enterprises. The study emphasizes the necessity of a cultural shift towards greater openness and collaboration among stakeholders to fully leverage the potential of blockchain. Furthermore, it discusses the environmental impact of blockchain technologies, particularly their energy consumption, and the need for sustainable solutions. The findings suggest that while blockchain holds great promise for transforming supply chain management, careful consideration of the associated challenges is crucial. Future research and industry dialogue will be essential in overcoming these hurdles and achieving widespread blockchain adoption.

In central area of Liaoning province, the thermal performance of rural building envelopes are mostly non-standardized in Northern China, resulting in a significant heat loss. In this study, The objective was to propose some low-cost and energy-efficient solutions. Through a field of inves-tigations, heating energy consumption was saved by 20% and increased construction costs was less than 8000 RMB, which was acceptable for rural residents. In order to achieve this target, NSGA-II algorithm was integrated with Rhino+Grasshopper and EnergyPlus simulation kernel to establish a thermal performance optimization model for heat transfer of the rural building envelopes. Among the above Pareto optimal solutions, the recommended thickness of insulation layer for the room floors, ceilings, and external walls were 70mm, 50mm, and 40mm respectively. Furthermore, try to reduce the window to wall ratio as much as possible. Finally, based on the lower total cost, three technical solutions that rural residents could select according to their specific needs have been put forward.

This paper presents the development of a prescriptive digital twin model designed to optimize building environments by leveraging advanced smart technologies such as machine learning, artificial intelligence, cloud computing, and the Internet of Things. The study identifies critical factors affecting user activities, including lighting, HVAC, indoor air quality, and acoustics, and incorporates these into the model to enhance user productivity and comfort in workspaces. Our findings demonstrate that the integration of smart technologies can significantly improve workspace efficiency and user satisfaction, providing actionable insights for future implementations. This study not only highlights the potential benefits of prescriptive digital twins in smart buildings but also emphasizes the importance of comprehensive data gathering and analysis from various sources to support further research. Ultimately, our work offers valuable contributions to the field of building management and underscores the need for continued exploration of digital twin technologies.

The physical properties of nano-fertilizers (NFs) are important in determining their performance, efficacy, and environmental interactions. Nano-fertilizers, due to their small size and high surface area-to-volume ratio, enhance plant metabolic reactions, resulting in higher crop yields. The properties of nano-fertilizers depend on the synthesis methods used. The nanoparticle's nutrient use efficiency (NUE) varies among plant species. This review aims to analyze the relationship between the physical properties of NF and their influence on crop performance and nutrient uptake efficiency. The review focuses on the physical properties of NFs, specifically their size, shape, crystalline, and agglomeration. This review found that smaller particle-sized nanoparticles exhibit higher nutrient use efficiency than larger particles. Nano-fertilizer-coated additives gradually release nutrients, reducing the need for frequent application and addressing limitations associated with chemical fertilizer utilization. The shapes of nano-fertilizers have varying effects on the overall performance of plants. The crystalline structure of nanoparticles promotes a slow release of nutrients. Amorphous nano-fertilizers improve the NUE and, ultimately, crop yield. Agglomeration results in nanoparticles losing their nanoscale size, accumulating on the outer surface, and becoming unavailable to plants. Understanding the physical properties of nano-fertilizers is crucial for optimizing their performance in agricultural applications.

This study investigated the efficiency of scale-propellers, typically used on small drones. A scale-propeller is accepted as having a diameter of 7 to 21 inches. The Ukraine War has demonstrated the utility of relatively small, low-cost first-person view (FPV) drones, which are attritable. This investigation outlines the development of a MATLAB optimisation code, based on minimum induced loss propeller theory, which calculates the optimal chord and twist distribution for a chosen propeller operating in known flight conditions. The MATLAB code includes a minimum Reynolds number functionality, which provides the option to alter the chord distribution to ensure the entire propeller is operating above a set threshold value of Reynolds (&gt;100,000), as this has been found to be a transition point between low and high section lift-to-drag ratios. Additional functions allow plotting of torque and thrust distributions along the blade. The results have been validated on experimental data taken from an APC ‘Thin Electric’ 10” x 7” propeller, where it was found that both the chord and twist distributions were accurately modelled. The MATLAB code resulted in a 16% increase in the maximum propulsive efficiency. Further work will investigate a direct interface to SolidWorks to aid rapid propeller manufacturing capability.

This study aims to evaluate the financial performance of SOEs in Indonesia and compare it with private companies using financial ratio analysis and efficiency analysis approaches. Four construction sector SOEs were evaluated, and five private companies were compared using financial data from 2015 to 2022. The financial ratio analysis used the Peterson (2013) approach, while the efficiency analysis employed the data envelopment analysis (DEA) approach and the paired t-test. The study results show that the financial ratio performance of state-owned companies is relatively poor, with low profitability, critical liquidity, and a high debt ratio. Debt, as a source of capital in financing construction projects, makes companies face a greater debt risk. This study validates that SOEs have lower efficiency compared to private companies.

This study analyzes the relevance of governance structure for efficiency in revenue collection by Brazilian Water Utilities (WUs). Data was collected from the National Information System on Sanitation (SNIS) for 127 Brazilian WUs, covering a balanced longitudinal panel from 2018 to 2022. Governance structures evaluated included Ownership (public or private) and Corporatization (publicly traded or not). In scientific databases, we did not find studies on the efficiency of specific WUs in collecting customer bills for services rendered and its relationships with this type of governance; thus, this would be the main innovative contribution of the study to the previous literature. In the first stage, the study utilized the Dynamic Slack Based Model (DSBM) to assess revenue collection efficiency. In the second stage, an econometric model with Generalized Estimating Equations (GEE) to explain the efficiency. The findings revealed a global average inefficiency of 50.47% in revenue collection. Corporatization was linked to higher collection efficiencies, while ownership type was significant, but with lower collection efficiency. Factors such as tariff accessibility, urbanization, and the COVID-19 pandemic also influenced efficiency. The study suggests regulatory bodies should consider these insights to implement policies that prevent inefficiencies from affecting the tariff system for services.

The study aims to evaluate the impact of organizational culture on labor efficiency at foreign-invested logistics service enterprises that are on its ways towards business sustainability. The authors develop theoretical basis on organizational culture and explore factors that contribute to organizational culture and labor efficiency; from which 03 research hypotheses are proposed. Primary data are collected from logistics businesses through questionnaires; multiple linear regresion model is used to analyze the influence of organiational culture on labor effeciency at foreign-invested logistics enterprises. Research results indicate 05 factors of organizational culture contribute positive impact on employee productivity, including employees’ trust, company ideals, leadership styles and authority division, business philosophy and mission, people’s relationship with naturual environment. Based on the research results, proposed recommendations are suggested for improving labor efficiency at foreign-invested logistics service enterprises in a sustainable way.

Intelligence is a human construct to represent the ability to achieve goals. Given this wide berth, intelligence has been defined countless times, studied in a variety of ways and represented using numerous measures. Understanding intelligence ultimately requires theory and quantification, both of which have proved elusive. I develop a framework -- the Theory of Intelligences (TIS) -- that applies across all systems from physics, to biology, humans and AI. TIS likens intelligence to a calculus, differentiating, correlating and integrating information. Intelligence operates at many levels and scales and TIS distils these into a parsimonious macroscopic framework centered on solving, planning and their optimization to accomplish goals. Notably, intelligence can be expressed in informational units or in units relative to goal difficulty, the latter defined as goal complexity relative to system (individual or benchmarked) ability. I present general equations for intelligence and its components, and a simple expression for the evolution of intelligence traits. The measures developed here could be the basis for further refinements to gauge different facets of intelligence for any step-wise transformation of information. I argue that "proxies" such as environment, technology, society and collectives are essential to a general theory of intelligence and to possible evolutionary transitions in intelligence, particularly in humans. I conclude with testable predictions of TIS and offer several speculations.

Water scarcity, particularly in arid and semi-arid regions, poses a significant challenge to crop production, with drought being a prevalent factor limiting grain production globally. Enhancing agricultural water use efficiency is crucial for managing water resources effectively in these areas. Water resource management involves planning, developing, distributing, and optimizing the use of water resources. Water use efficiency management is also essential for crop growth in arid regions. Various agronomic and irrigation strategies can improve crop water use efficiency and drought tolerance. The primary goal of these strategies is to maximize irrigation efficiencies by applying the precise amount of water needed to restore soil moisture to the desired level. These sustainable practices not only reduce the cost of water and labor for farmers through reduced irrigation but also optimize the use of soil moisture storage. This review paper explores practical techniques to improve water use efficiency, highlighting the role of nutrients in enhancing water use efficiency in crop plants.

Low energy consumption is a significant contribution of new and retrofitted buildings that place an emphasis on energy efficiency. Although the mandatory requirements of the U-factor and R-value are described in the Vietnamese National Technical Regulation on the energy efficiency of buildings—QCVN09:2017/BXD, these values are not widely publicized, leading to designers facing difficulties when choosing suitable materials at the design stage. This study focuses on the method used to declare the heat transfer values of building materials based on the energy labeling process in order to create an energy labeling program for building materials. To accomplish this objective, criteria and labeling procedures for windows, doors, walls, and building roofs have been developed. In addition, a case study of insulation product labeling was used to evaluate the applicability of the developed labeling program in the implementation phase.

The article delves into the crucial realm of compressing hydrogen in its gaseous state, a pivotal process for enhancing its viability in both civil and industrial sectors. The study initiates by providing a concise overview and comparison of diverse hydrogen storage methodologies, laying the groundwork with an in-depth analysis of hydrogen's thermophysical properties. It scrutinizes plausible configurations for hydrogen compression, aiming to strike a delicate balance between energy consumption, predominantly derived from the fuel itself, and the requisite number of compression stages. Notably, to render hydrogen storage competitive in terms of volume, pressures of at least 350 bar are deemed essential, albeit at an energy cost amounting to approximately 10% of the fuel's calorific value. Multi-stage compression emerges as a crucial strategy, not solely for energy efficiency, but also to curtail temperature rise, with an upper limit set at 200°C. This nuanced approach is underlined by the exploration of compression levels commonly cited in the literature, particularly 350 bar and 700 bar. Ultimately, the study advocates for a three-stage compression system as a pragmatic compromise, capable of achieving high-pressure solutions while keeping compression work below 10 MJ/kg, a threshold indicative of sustainable energy utilization.

The implementation of sustainable practices, such as the use of renewable sources and efficient technologies, is crucial for reducing climate change. Energy efficiency is highly important on a global scale due to its relationship with climate change, aiming to minimize environmental impact. In Spain, renewable energy policies have increased self-sufficiency and reduced the use of fossil fuels. Optimizing energy consumption in residences, buildings, and industries is essential for improving efficiency. This was taken into consideration for conducting this study, focusing on the residential sector. The desire to understand the level of energy efficiency in Extremadura drove this project, which focuses on collecting and analyzing data on a set of homes located in the au-tonomous community of Extremadura, with the purpose of evaluating their energy efficiency. To achieve this, a computer tool will be employed to provide a detailed view of the different levels of energy efficiency present in the community. In addition to data collection and analysis, research will be conducted to identify areas for improvement. This will allow proposing a series of specific measures that users can implement to optimize energy efficiency in their homes, adapting them to the particular characteristics of each residence.

Purpose of publication: - Preparation of bibliometric data exported from the Scilit platform on energy efficiency and conservation for further analysis to identify relevant research topics. - To identify potential issues in the processing of data exported from the Scilit platform. - Providing colleagues with the opportunity to use the prepared data and examples of their analysis for independent research on topical issues of energy efficiency and energy conservation using materials provided by the Scilit platform. Research Materials: Files in CSV and RIS formats exported from Scilit for the query "energy conservation OR efficiency" in Common Fields [Title, Abstract, Keyword], using filters: Content Type → Journal Article; Year→2021-2023; Subject → Industrial Engineering (29.8K), Energy and Fuel Technology (9.8K), Manufacturing Engineering (9.2K). A total of 30K records sorted by their relevance (10K for each year) were exported. Data are current as of 14-03-2024. Methods: Preprocessing of title, annotation, and keyword field texts using lemmatization dictionaries collected on GitHub, removal of keywords taken from GATE and spaCy, and "manual" editing. Using VOSviewer to analyze publication topics by clustering keywords based on their co-occurrence. Using Scimago Graphica to build bubble diagrams.Application of the GSDMM algorithm for clustering bibliometric records by title and annotation texts. Creation of a dictionary for this algorithm using the keyword field.Use of the Carrot2 demo version and the NMF algorithm for a more detailed analysis of the topics of the record clusters obtained from GSDMM. Results: are presented in the form of initial and interim tables and graphs obtained in the course of this study. The full tables are provided as references to the attached materials. Supplementary material for this preprint on figshare: Chigarev, Boris (2024). Supplementary material for preprint "Analyzing the Possibilities of Using the Scilit Platform to Identify Current Energy Efficiency and Conservation Issues". figshare. Dataset. https://doi.org/10.6084/m9.figshare.25574058.v1

The emergence of electric vehicles has brought new issues such as the problem of rolling element bearings (REBs) operating at high speeds. Losses due to these components in mechanical transmissions are a key issue and must therefore be taken into account right from the design stage of these systems. Among these losses, the one induced by the motion of rolling elements , known as drag loss, becomes predominant in high-speed REBs. Although an experimental approach is still possible, it is difficult to isolate this loss in order to study it properly. A numerical approach based on CFD is therefore a possible way forward, even if other issues arise. The aim of this article is to study the ability of such an approach to correctly estimate the drag coefficient associated with the motion of rolling elements. The influence of the numerical domain extension, the mesh refinement, the simplification of the ring shape and the presence of the cage, on the values of the drag coefficient is presented. While it seems possible to compromise on the calculation domain and mesh size, it appears that the other parameters must be taken into account as much as possible to obtain realistic results.

The scientific community has shown considerable interest in Industry 4.0 due to its capacity to revolutionise the manufacturing sector through digitalisation and data-driven decision-making. However, the actual implementation of Industry 4.0 within complex industrial settings presents obstacles that are typically beyond the scope of mainstream research articles. In this paper, a comprehensive case-study detailing our collaborative partnership with a leading medical device manufacturer is presented. The study traces their evolution from a state of limited digitalisation to the development of a digital intelligence platform that leverages data and machine learning models to enhance operations across a wide range of critical machines and assets. The main business objective was to enhance the energy efficiency of the manufacturing process, thereby improving its sustainability measures while also saving costs. The project encompasses energy modelling and analytics, Fault Detection and Diagnostics (FDD), renewable energy integration and advanced visualisation tools. Together, these components enable informed decision making in the context of energy efficiency.

In the context of the coordinated development of digital economy and environmental protection, we take the strategy of "Broadband China" as a quasi-natural experiment, adopts the panel data of 284 cities from 2007 to 2020, and evaluates the policy effect of digital economy on total factor energy efficiency through the progressive DID model. The results show that: The construction of "Broadband China" demonstration city has significantly promoted the improvement of the total factor energy efficiency of the demonstration city, but there is also significant urban heterogeneity, which is manifested in the significant improvement of the total factor energy efficiency of the eastern city, the southern city, the big city and the non-resource-based city. It has no significant effect on the total factor energy efficiency of central and western cities, northern cities, small and medium-sized cities and resource-based cities. The construction of "Broadband China" demonstration cities can improve total factor energy efficiency by promoting technological progress and strengthening environmental regulations. Therefore, we should further strengthen the construction of digital infrastructure and give full play to its positive effects. Different cities should seek differentiated development paths based on their own resource endowments and development conditions, so that the digital economy can effectively improve the total factor energy efficiency.

The performance analysis of the internal/external flows around a high speed vehicle in near-space is fundamental and critical to the configuration and structure design for high speed aircraft. In this paper, the two-dimensional coupled implicit Reynolds Average Navier-Stokes (RANS) solver and RNG k–ε turbulence model is employed to numerically simulate the flow field of an integrated high speed vehicle. The flow field are divided three parts to solve separately and compared with that solved by integrated simulation. The flow field are decomposed to save computer storage and simulation time. The first part is inlet/isolator, the second part is combustion chamber and the third is nozzle. In the computation process, the outlet condition of isolator is endowed to the inlet boundary of combustion chamber and the outlet boundary of combustion chamber is endowed to the inlet boundary of nozzle, then the whole flow field of integrated high speed vehicle is solved. Aerodynamic characteristic of fragment-computation and integration-computation is comparatively analyzed at different angles of attack, the results show that the maximum deviation of lift coefficient obtained by fragment-computation is less than 3% compared with that by integration, the maximum deviation of drag coefficient fragment-computation is less than 5% compared with that by integration, while pitching moment coefficient deviation less than 12%. However, for simulation time-consumption, the time used by fragment-computation reduces 45% compared with integration-computation. Meanwhile, by components force analysis, it can be concluded that the aerodynamic property of inlet/isolator can been obtained separately and hardly effected by other parts.

In this study, we present a federated learning approach that combines a multi-branch network and the Oort client selection algorithm to improve the performance of federated learning systems. This method successfully addresses the significant issue of non-iid data, a challenge not adequately tackled by the commonly used MFedAvg method. Additionally, one of the key innovations of this research is the introduction of uniformity, a metric that quantifies the disparity in training time amongst participants in a federated learning setup. This novel concept not only aids in identifying stragglers but also provides valuable insights into assessing the fairness and efficiency of the system. Experimental results underscore the merits of the integrated multi-branch network with the Oort client selection algorithm and highlight the crucial role of uniformity in designing and evaluating federated learning systems.

The main development direction of energy efficiency technologies in construction is the creation of various materials with a complex structure and unique strength, thermal and other properties. The aerogel is a material with high porosity and excellent thermal insulation properties. This paper provides the state-of-the-art of aerogel applications for the additive manufacturing of energy efficient buildings. This work provides the experimental and numerical assessment results of thermal conductivity of aerogel-enhanced blanket, the experimental assessment results of thermal performance of aerogel-enhanced building structure, the experimental assessment results of the aerogel application as mixture powder component of the concrete mixture to printing building and the experimental assessment results of the aerogel application as parget powder component. Experimental results show the effect of aerogel powder component application: thermal conductivity decreased by 25%.

High-performance insulation and airtight building envelopes are the two most important factors to optimize the building energy efficiency and thermal performance. However, thermal performance of building envelopes can be significantly affected by thermal bridging. Thermal bridges can take place at different locations of the building envelope, causing added transmission losses, increasing heat flow, lower inner surface temperatures. Thermal bridges are regarded in all national regulations for new buildings of all states of European Union (EU) but there are no specifications assessing balconies to wall junctions and the impact on the building thermal performance is not well regulated. In this paper, balcony to wall thermal bridge assessment using infrared thermography is highlighted. The originality is that, infrared thermography, has been applied to a real living latest building in the north east of France showing that there is noncompliance in the national regulations as some exigencies are not met. Thermography of thermal break windows and window doors has also revealed air leakage. The goal, is to illustrate that thermal imaging is a means of quality assurance to new building specifications and should include a clause specifying quality assurance procedure for balconies junction in national building regulations for all states if the EU.

The aims of this paper can be traced back to goals number seven, twelve and thirteen introduced by Agenda 2030, namely "affordable and clean energy", “responsible consumption and production” and "climate action”, respectively. This is due to the fact that the present work supports decarbonization processes acting in a direct way on the electricity consumption achieved by plants pertaining to the waste industry; in fact, this study aims at the realization of a machine learning model for predicting the energy consumption achieved by a mechanical biological treatment (MBT) waste plant located in central Italy, given the distribution of the entering waste. This model is implemented in MATLAB. The model can be used to tune the distribution of the entering waste in order to adapt the plant energy consumption to the capability of the energy sources and can serve as a play-ground model for other energy transformation plants. The results of the study, which feed the literature on the application of artificial intelligence to real industrial plants, could be used to determine energy efficiency actions that could be incorporated into Property’s strategic planning.

The use of zeolite in agriculture as a soil conditioner is becoming an important field of research in crop growth. To study the effect of synthetic zeolite and deficit irrigation on sweet pepper (Capsicum annuum L.) cultivation, an experiment in a controlled environment was conducted. In particular, sweet pepper was cultivated in a glasshouse using polypropylene pots filled with sandy-loam soil to which 2% of zeolite was added. The zeolite employed in the experiments was obtained using coal fly ash as raw material. The experiment was planned in order to have two main treatments consisting of a) soil with zeolite at 2% (Z) and b) soil without zeolite, as control (C), and three subplot treatments consisting of 1) full irrigation at 100% of available water content (AWC) (100); 2) deficit irrigation at 70% of AWC (70); 3) deficit irrigation at 50% of AWC (50). Sweet pepper cultivation started on the 24th April 2023 and lasted until the 23th June 2023 and during the trial environmental data, such as soil humidity, air temperature and relative humidity, and some crop parameters, such as plant height, leaf number, SPAD index, were monitored. At the end of the trial, fresh and dry plant weight, dry matter content, and leaf water potential were measured. Results showed that for plant fresh weight and dry matter content, no significant differences were observed by treatments and their interactions whereas for the other parameters the statistical analysis returned significant differences. The study suggests that the soil structural benefits, resulting from the zeolite application, are not followed by an equal positive effect in terms of sweet pepper growth under deficit irrigation conditions.

In this study, we have included the water footprint (WF) in the process of optimising animal feed rations. The global footprint of cattle production accounts for the largest share (33%) of the global water footprint of livestock production. Using two homogeneous groups of Limousine Podolian young bulls, two different diets were compared: corn silage feeding (CSF), with corn silage-based diet; and the triticale silage feeding (TSF), with triticale silage-based diet. Silage constituted about 41% and 46% of the feed composition (for CSF and TSF, respectively). Diets were characterised by the same energy and protein content. Despite the lower WF in the TSF group than in the CSF group (7726 vs 8571 l/day/calf respectively), no significant differences were found in animal performances (i.e., daily weight gain and final weight), feed conversion and income over feed costs. These results show that simple production decisions can have a significant impact on water resource. Therefore, the use of triticale silage should be further promoted, especially in world regions with limited water resources where low WF feed formulation is more strategic than elsewhere.

Thermoelectric (TE) waste heat recovery has attracted significant attention over the past decades, owing to its direct heat-to-electricity conversion capability and reliable operation. However, methods of system-level TE design optimization for specific application systems have not been thoroughly investigated. This work theoretically studies the performance optimization and exergy analysis of TE systems for recovering waste heat from the exhaust ducts of a gas turbine power plant. A numerical tool has been developed to solve the coupled charge and heat current equations with temperature-dependent material properties and convective heat transfer at the interfaces. Our calculations show that at the optimum design with 50 % fill factor and 6-mm leg thickness made of state-of-the-art Bi2Te3 alloys, the proposed system can reach power output of 10.5 kW for the TE system attached on a 2 m-long, 0.5 x 0.5 m2-area exhaust duct with system efficiency of 5 % and material cost per power of 0.23 $/W. Moreover, our extensive exergy analysis reveals that only 1 % of the exergy content of the exhaust gas is exploited in this heat recovery process and the exergy efficiency of the TE system can reach 8 % with improvement potential of 85 %.

We evaluated the detection efficiency and location accuracy of lightning discharges in Japan using Blitzortung.org, a volunteer-based network for locating lightning discharges from sferics measured by VLF electromagnetic receivers that have been deployed worldwide in recent years. A comparison of the flash rate (the detected lightning rate per area and period) from Blitzortung.org with that from the satellite-based OTD/LIS and the ground-based World Wide Lightning Location Network (WWLLN) observations showed that Blitzortung.org clearly observed intense lightning activity in and around the Kanto area, including Tokyo, in summer, which is typical of Japanese lightning activity. However, it did not clearly observe lightning activity in and around the Nansei Islands, including Okinawa. Conversely, Blitzortung.org observed winter lightning activity in the Hokuriku area and off the Kanto. In addition, event studies have compared the detection efficiency and location accuracy of Blitzortung.org with those of the Japanese Lightning Location Network (JLDN) to infer their absolute values. The latest detection efficiency of Blitzortung.org in the Kanto area was estimated at roughly 90%. The mean location accuracy was estimated at up to 5.6 km.

The role of volume hydrogel holographic gratings as optical transducers in sensor devices for point-of-care applications is increasing due to their ability to be functionalized for achieving enhanced selectivity. The first step in the development of these transducers is the optimization of the holographic recording process. The optimization aims at achieving gratings with reproducible diffraction efficiency, which remains stable after reiterative washings, typically required when working with analytes of biological nature or several step tests. The recording process of volume phase transmission gratings within acrylamide/propargyl acrylate hydrogel layers reported in this work was successfully performed and the obtained diffraction gratings were optically characterized. Unslanted volume transmission gratings were recorded in the hydrogel layers and using the optimized conditions, diffraction efficiencies of up to 80% were achieved. Additionally, the recorded gratings demonstrated to be stable in water after multiple washings. The hydrogels, after functionalization with oligonucleotide probes yields specific hybridization response, recognizing the complementary strand as demonstrated by fluorescence. Analyte-sensitive hydrogel layers with holographic structures are a promising candidate for the next generation of in vitro diagnostic tests.

Using the Super-SBM method, this study calculates the carbon emission efficiency (CEE) of 30 provinces in mainland China from 2011 to 2019. Then, using the systematic GMM model, spatial Durbin model, and mediating effect model, it examines the direct effect, spatial effect, and influence mechanism of the digital economy (DE) on CEE. It was found that (1) the DE significantly promoted regional CEE, but had a negative effect on CEE in provinces with high economic correlation; (2) mechanism studies showed that the DE improved CEE by reducing energy intensity, promoting industrial upgrading and green technology innovation; (3) regional heterogeneity analysis found that the DE significantly improved CEE in eastern provinces, but not in central and western provinces. DE improves CEE in provinces with high level of economic development, but decreases CEE in provinces with low level of economic development.This paper provides some empirical and theoretical references for the development of DE to improve CEE.

The ozonation reaction in a bubble column reactor (BCR) has been widely used in the removal of phenol from wastewater, but the phenol removal efficiency in this type of reactor is limited because of low ozone solubility and reactivity in the system. In the present study, the phenol degradation was enhanced using α-Al2O3 as a packing material and a ZnO nanocatalyst in the BCR. The reactor diameter and height were 8 cm and 180 cm, respectively. The gas distributor was designed to include 52 holes of 0.5-mm diameter. Also, the gas holdup, pressure drop, and bubble size were measured as a function of the superficial gas velocity (i.e., 0.5, 1, 1.5, 2, 2.5, and 3 cm/s). The evaluation of the hydrodynamic parameters provided a deep understanding of the ozonation process to select the optimal operating parameters in the reactor. It was found that the best superficial gas velocity was 2.5 cm/s. A complete (100%) phenol removal was achieved for phenol concentrations of 15, 20, and 25 ppm at reaction times of 80, 90, and 100 min, respectively, using α-Al2O3 packing material and a ZnO nanocatalyst in the BCR. Additionally, the results provided a clear reaction mechanism describing the ozonized BCR. Finally, the applied treatment method can be used efficiently to remove phenol from wastewater at a low cost, with little consumed energy, and a simple operation.

To address the challenges of climate change and food security, the establishment of smart farm complexes is necessary. While there have been numerous studies on the productivity and environmental control of individual greenhouses, research on greenhouse complexes is considerably limited. Conducting environmental studies during the design phase of these complexes poses financial constraints and practical limitations in terms of on-site experiments. To identify potential issues that may arise when developing large-scale greenhouse complexes, it is possible to utilize modeling techniques using Computational Fluid Dynamics (CFD) to assess environmental concerns and location issues before constructing the facilities. Consequently, simulating large-scale CFD models that incorporate multiple greenhouses and atmospheric conditions simultaneously presents significant numerical challenges. The objective of this study was to develop a guideline for verifying CFD models for a large-scale Venlo greenhouse, where acquiring field data before construction is not feasible for designing a greenhouse complex. The verification processes of the CFD models were conducted using 2D and 3D iterative simulations of a 2-hectare greenhouse model, using the improved Grid Independence Test (GIT) and wall Y+ approaches. Subsequently, the aerodynamic characteristics were analyzed in a 3D greenhouse model to access its performance when the wind direction was 90° in summer season. The findings revealed that a grid resolution of 0.8 meters and a first layer height of 0.04 meters were suitable for developing large-scale greenhouse models, resulting in a low Root Mean Square Error (RMSE) of 3.9% and a high coefficient of determination (R2) of 0.968. This process led to a significant reduction of 38% in the number of grid cells. These results will serve as design standards for large-scale greenhouses.

In the context of economic development and international economic integration, the logistics industry in Vietnam is developing to meet the market demand for the transportation of goods; thus, many logistics enterprises have been formulated and grown up in recent years. This research aims to measure the efficiency of logistics enterprises and recommend a feasible solution to improve their future performance by integrating the Super Slacked-based Measure model (Super-SBM) in Data Envelopment Analysis and Fuzzy Analytic Hierarchy Processes (Fuzzy AHP) in multi-criteria decision-making. The super-SBM model was utilized to conduct the efficiency scores of logistics enterprises from 2016 to 2022 based on calculating the ratio between input and output variables; the empirical result determined each enterprise's effectiveness and ineffectiveness. Next, the Fuzzy AHP method evaluated and ranked criteria that directly impacted the operational process of logistics enterprises based on experts' opinions; the examined result suggested a feasible direction to improve their business efficiency in the future. The proposed hybrid models are a helpful solution for efficiency determination and development direction for logistics enterprises. An overall picture of the logistics enterprises was also drawn to describe their operational business process.

In this work, we compiled our research on lanthanide-based luminescent materials, prepared down-shifter layers, and studied their effect on photovoltaic (PV) mini-modules. The compounds we have prepared (C1-C17), with formulas [Eu2(phen)2(bz)6] (C1), [Eu2(bphen)2(bz)6] (C2), [Eu(tta)3bphen] (C3), [Eu(bta)3pyz-phen] (C4), [Eu(tta)3pyz-phen] (C5), [Eu(bta)3me-phen] (C6), [Er(bta)3me-phen] (C7), [Yb(bta)3me-phen] (C8), [Gd(bta)3me-phen] (C9), [Yb(bta)3pyz-phen] (C10), [Er(tta)3pyz-phen] (C11), [Eu2(bz)4(tta)2(phen)2] (C12), [Gd2(bz)4(tta)2(phen)2] (C13), [EuTb(bz)4(tta)2(phen)2] (C14), [EuGd(bz)4(tta)2(phen)2] (C15), [Eu1.2Gd0.8(bz)4(tta)2(phen)2] (C16) and [Eu1.6Gd0.4(bz)4(tta)2(phen)2] (C17), can be grouped into three families based on their composition: Series C1–6 were synthesized using Eu3+ ions and phenanthroline derivatives as the neutral ligands, and fluorinated β-diketonates as the anionic ligands. Complexes C7–11 were prepared with ligands similar to those of compounds C1–6 but were synthesized with Er3+, Yb3+, or Gd3+ ions. Series C12–17 exhibit the general formula [M1M2(bz)4(tta)2(phen)2], where M1 and M2 can be Eu3+, Gd3+, or Tb3+ ions, and the ligands are benzoate (bz–), 2-thenoyltrifluoroacetone (tta–) and 1,10–phenanthroline (phen). All compounds were characterized using X-ray techniques, and their photoluminescent properties were studied. We then examined their impact on the EQE (External Quantum Efficiency) of PV mini-modules and their durability in a climate chamber when embedded in PMMA and EVA films. This review emphasizes the methodology employed and the key findings, including enhanced mini-module efficiency. Additionally, we present promising results on the application of compound C6 in a bifacial solar cell.

Anaerobic digestion has emerged as an increasingly popular method for the effective management of organic waste and wastewater with the potential to generate renewable energy. However, efficient digestion depends heavily on the complex and diverse microbial communities mediating this process. This review paper delves into the complex microbiome that exists within anaerobic digestion digesters, playing a critical role in the efficient and sustainable conversion of organic waste into biogas. Its primary focus falls within the scope of how various operational and environmental factors, including temperature, pH, hydraulic retention time, substrate loading rates, and the presence of inhibitory compounds, can substantially impact the microbiome of these systems. Through an extensive analysis of the existing literature, the microbial ecology of anaerobic digestion, including the composition and function of the microbial community, their interactions, and responses to different stressors, are evaluated. By offering critical insights into the distribution patterns of active microbial populations upon alterations in various process parameters, a better understanding of the microbial dynamics within these systems is provided, enhancing their efficiency. Overall, this paper emphasizes the importance of unraveling the microbial evolution within AD reactors to optimize biogas production and sustainable waste management and proposes future perspectives in this direction.

Ca2+ is a crucial second messenger in plant cells, playing a vital role in various physiological and biochemical processes, including plant growth and development, photosynthesis, and enzyme regulation. Exogenous calcium concentration can have different effects on plant growth. This study aimed to investigate the optimal calcium concentration for the growth of four tree species, namely Pinus tabuliformis, Pinus sylvestris var. mongolica, Populus, and Morus alba seedlings, and whether the optimal calcium concentration varies among different tree species. The study utilized five calcium concentration gradients (0, 100, 200, 400, 800 mg·kg-1) for each species with three repeated treatments. Various growth indexes, photosynthetic parameters, chlorophyll fluorescence parameters, water use efficiency, and antioxidant enzyme activities were assessed to determine each species' calcium concentration requirements. The results showed that exogenous calcium significantly affected the growth and development of each seedling. The growth, biomass, photosynthetic parameters, photosynthetic products, photosynthetic pigments, water use efficiency, and antioxidant enzyme activity all increased initially and then decreased with increasing calcium concentration. Leaf calcium concentration also increased with the exogenous calcium content. Thus, there is an optimal calcium concentration for plant growth, and high or low calcium concentration is not conducive to plant growth. Furthermore, the study found that different tree species have varying optimal calcium concentrations. The optimal calcium concentration for Pinus tabuliformis, Pinus sylvestris var. mongolica, Populus, and Morus alba seedlings was 100, 100, 200, and 400 mg·kg-1, respectively. Finally, the study revealed that broadleaf species require higher calcium concentrations than coniferous species.

The reliability of Underwater Wireless Sensor Networks (UWSNs) is measured in terms of energy consumption (EC), end-to-end delay(E2E) and packet delivery ratio (PDR). The adverse effects of channel may cause data loss. Reducing delay up to possible extend improves the reliability of the network, also increasing the number of nodes in a particular network increase reliability. Besides, increasing the number of nodes improve reliability but also increase power consumption. In order to overcome these shortcomings, the two routing protocols are proposed in this paper, namely Delay and Reliability Aware Routing (DRAR) protocol and Cooperative Delay and Reliability Aware Routing (Co-DRAR) protocol for UWSNs. In DRAR protocol, network is divided into two equal regions where two sink nodes(SNs) are positioned at upper region of the network and two SNs are placed at the mid region of the network. The protocol choose the relay node based on residual energy (RE), distance and Bit Error Rate (BER). These parameters protect the data packets from corruption and also provide stable path (where nodes remain active for longer period and do not die quickly). The protocol uses single link and may get worse sometimes while changing channel circumstances. To address this problem, cooperative routing scheme is added to DRAR protocol in order to developed its enhanced version known as Co-DRAR protocol. The protocol works by allowing the destination to receive multiple copies of data packets in order to decide the quality of packets. The proposed protocols DRAR and Co-DRAR perform routing irrespective to geographical position of sensors nodes conversely to the some of conventional routing protocols that's way our propose protocol better perform than the well-known protocol i.e. Depth base routing (DBR) in terms of EC, E2E, PDR, dead nodes, packet drop ratio and number of alive nodes (ANs).

This paper introduces actual considerations on the progressive disuse of residential space in the Alpine territory, considering possible actions. Nowadays, the building complexes built around the 60s and 70s (symbol of the mass tourism) fell to be suffering and searching of a new identity: the generation of owners, who bought them, has aged and the propensities of the new generations for holiday in those places have changed, which, moreover, now offer fewer opportunities for leisure, particularly in winter. Due to the great attention (and seeming opportunities) of current incentive policies towards the energy improvement of the existing stock, authors investigate the private conveniences of transformations through the refurbishment of these buildings. Starting from the study of the territory and the dynamics of local population, the research analyses a possible set of energy works, based on the 110% Superbonus tax incentive, introduced by L.D. 34/2020. A large part of the insights is focused on technical and economic feasibility study of the possible actions, following a process based on the evolution of the legislation. The work carried out is based on a specific case study, located in a small municipality in Piedmont mountain area, consisting of three apartment blocks of mostly second homes. The adopted methodology lends itself as a guide for the feasibility study of the Superbonus and, used as a tool for policy evaluation, leads to interesting results from the point of view of both private and public convenience.

Nature provides plenty of good examples for simple and very efficient joint assemblies. One example is the enormously flexible cervical spine of American barn owls, which consists of 14 cervical vertebrae. Each pair of vertebrae produces a comparatively small individual movement in order to provide a large overall movement of the entire cervical spine. The biomimetic replication of such joints is difficult due to the delicate and geometric unrestricted joint shapes as well as the muscles that have to be mimicked. Using X-ray as well as micro computed tomography images and with the utilisation of additive manufacturing, it is possible to produce the owl neck vertebrae in scaled-up form, to analyse them and then to transfer them into technically usable joint assemblies. The muscle substitution of these joints is realised by smart materials actuators in the form of shape memory alloy wire actuators. This actuator technology is outstanding for its muscle-like movement and for its enormous energy density [1,2]. The disadvantage of this wire actuator technology is the low rate of contraction, which means that a large length of wire has to be installed to generate adequate movement. For this reason, the actuator wires are integrated into additively manufactured carrier components to mimic the biological joints. This results in joint designs that compensate for the disadvantages of the small contraction of the actuators by intelligently installing large wire lengths on comparatively small installation spaces, while also providing a sufficient force output. With the help of a test rig, the developed technical joint variants are examined and evaluated. This demonstrates the technical applicability of this bionic joints.

Although several protocols for genetic transformation of citrus have been published, it is highly desirable to further improve its efficiency. Here we report treatments of Agrobacterium cells and citrus explants prior to and during co-cultivation process to enhance transformation efficiency using a commercially used rootstock 'Carrizo' Citrange as a model plant. We pre-cultured Agrobacterium cells in a 1/10 MS, 0.5 g/L 2-(N-morpholino) ethanesulfonic acid (MES) and 100 µM acetosyringone liquid medium for 6 hours at 25 ℃ before used to infect citrus explants. We incubated epicotyl segments in an MS liquid medium containing 13.2 µM 6-BA, 4.5 µM 2,4-D, 0.5 µM NAA for 3 hours at 25℃ prior to Agrobacterium infection. In the co-cultivation medium, we added 30 µM paclobutrazol and 10 µM lipoic acid. Each of these three treatments significantly increased the efficiencies of transformation. When the three treatments were combined, we observed that the transformation efficiency was enhanced from 11.5% to 52.3%. The improvement of genetic transformation efficiency mediated by these three simple treatments may facilitate more efficient applications of transgenic and gene editing technologies for functional characterization of citrus genes and for genetic improvement of cultivated citrus varieties.

In Europe, the recent application of regulations oriented to zero-energy buildings and climate neutrality in 2050 has led to a reduction in energy consumption for heating and cooling in the construction sector. The thermal insulation of the building envelope plays a key role in this process and the requirements about the maximum allowable thermal transmittance are defined by country-specific guidelines. Typically, high insulation values provide low energy consumption for heating, however, they may paradoxically imply the risk of overheating in summer period and thus negatively affect the overall performance of the building. In addition, the embodied energy and related emissions caused by the manufacturing and transportation processes of thermal insulation cannot be further neglected in the evaluation of the best optimal solution. Therefore, this paper aims to evaluate the influence in terms of embodied and operational energy of various walls’ thermal insulation thicknesses on residential buildings in Europe. To this end, the EnergyPlus engine was used for the energy simulation within Ladybug &amp; Honeybee tools, by parametrically conducting multiple iterations; 53 variations of external wall U-value, considering high and low thermal mass scenarios, were simulated for 100 reference cities of the European context, using a representative multifamily building as a reference. The results demonstrate that massive walls generally perform better than lightweight structures and, of course, the best solution in terms of energy varies according to each climate. The optimal values are graphically reported on the map of Europe according to specific climatic features, providing a guidance for new constructions and building retrofit.

AAs the global energy market undergoes a wholesale transformation accelerated by the need to decarbonise, a rapid transition to renewable energy and the mass deployment of distributed energy resources, autonomous energy networks or microgrids are emerging as an attractive mechanism for the delivery of electricity to end users. Yet in Australia, at least, relatively little is known about key aspects of microgrids that are fundamental to their successful deployment, not least the more commercial and economic elements rather than the purely technical. Drawing on the extant global literature on microgrids, this paper explores the most important of these aspects including business models, ownership and investment. Identifying the ambiguity, inconsistency and uncertainty evident in many of the feasibility studies currently in train across Australia, this paper highlights specific areas for future research that need to be addressed if the full potential of microgrids is to be realised in the context of a global energy transition both domestically and internationally.

U-turns and left turns are sometimes forbidden even though it increases travel distances. The greater travel distances are sometimes outweighed by the improved movement through intersections due to there being fewer conflicting lanes of traffic. One can, further, forbid straight-throughs. Restricting a sufficient number of turns can make intersections free from crossing lanes of traffic (``zero traffic conflict,'' ``ZTC"), though there may still be merging lanes of traffic. It's possible to make \begin{it}all\end{it} intersections in a road \begin{it}network\end{it} ZTC. However, keeping all destinations accessible and travel distances moderate requires careful selection of allowed driving directions and turning directions. We demonstrate through numerical microscopic and macroscopic simulations that there are road networks and ranges of traffic loads for which, in comparison with conventional schemes, ZTC road network can carry approximately $50$\% more vehicular traffic without incurring gridlock.

Small boat fishers are often the lifeblood of remote coastal communities in Iceland, contributing to employment, jobs and economic prosperity. This study conducts exploratory but highly practical research into the efficiency of onboard catch handling practices by Icelandic small boat fishers using fish handling tools called automatic jigging machines. Using applied research methods, this study researches whether standardisation of operations could be applied to make catch handling practices on small boats more time and resource efficient, leading to reduced waste, a consistently higher quality product, and potential increases in economic efficiency and sustainability. Thematic analysis, value stream mapping, flow analysis and Kaizen ideology were adopted to identify gaps and continuous improvement opportunities to standardise processes, leading to exemplary performance. Eight core recommendations are identified, seven of which are classed as straight-forward, ‘do now’ measures according to a Kaizen Priority Matrix. These include human and technological interventions in the areas of safety, organisational arrangements, hygiene, fish handling and bleeding, and cooling. Questionnaire responses reveal four main themes of importance to the sub-sector: changes in recent decades; the importance of small boat fishers; education and improvement; and the particularities of the sub-industry. The latter include the perception of a ‘race against time’ to land the catch, an issue that sometimes contributes to sub-optimal catch handling practices. Although this study has decidedly practical connotations for small boat fishers, its outcomes are also likely to be of interest to academics, particularly those focused on the organisational management of natural resources and general applications of the project management methodology and applied research methods as a means of solving practical problems in everyday life.

When all countries are battling Covid-19 by adopting different policies, it could help address the issue of government response policy efficiency. This study examines the efficiency of government intervention policies in 19 countries, the efficiency of preventing the spread, and also the mortality caused by the virus. The policies are categorized based on the Oxford COVID-19 Government Response Tracker, which combines various indicators, including Containment and closure, Economic response, and Health systems. Given that the governments apply a top-down approach to design these policies, the current research evaluates the efficiency of policies based on the same approach. Here, two different models have been used to calculate the efficiency of policies. We designed a combined index in both models and applied Window DEA method to determine the output quantities in the efficiency ratio. The results of our study show that in both models, Japan, Finland and Thailand had the highest level of government response efficiency. The countries with the lowest government response efficiency were the United States, Spain, and Russia in the first model, and China, Italy, and Spain in the second.

The aim of the paper is to investigate Nash equilibria and correlated equilibria of classical and quantum games in the context of their Pareto optimality. We study four games: the prisoner's dilemma, battle of the sexes and two versions of the game of chicken. The correlated equilibria usually improve Nash equilibria of games but require a trusted correlation device. We analyze the quantum extension of these games in the Eisert-Wilkens-Lewenstein formalism with the full SU(2) space of players’ strategy parameters. It has been shown that the Nash equilibria of these games in quantum mixed Pauli strategies are closer to Pareto optimal results than their classical counterparts. The relationship of mixed Pauli strategies equilibria and correlated equilibria is also analyzed.

Early prediction of thermal loads plays an essential role in analyzing energy-efficient buildings' energy performance. On the other hand, stochastic algorithms have recently shown high proficiency in dealing with this issue. These are the reasons that this work is dedicated to evaluating an innovative hybrid method for predicting the cooling load (CL) in buildings with residential usage. The proposed model is a combination of artificial neural networks and stochastic fractal search (SFS-ANN). Two benchmark algorithms, namely the grasshopper optimization algorithm (GOA) and firefly algorithm (FA), are also considered to be compared with the SFS. The non-linear effect of eight independent factors on the CL is analyzed using each model's optimal structure. Evaluation of the results outlined that all three metaheuristic algorithms (with more than 90 % correlation) can adequately optimize the ANN. In this regard, this tool's prediction error declined by nearly 23, 18, and 36 % by applying the GOA, FA, and SFS techniques. Also, all used accuracy criteria indicated the superiority of the SFS over the benchmark schemes. Therefore, it is inferred that utilizing the SFS along with ANN provides a reliable hybrid model for the early prediction of CL.

Increased demand for wearing face masks, lack of surgical masks and N95 respirators during the coronavirus pandemic created alternative needs for cloth masks. Therefore, to determine filtration efficacy, reusability and duration of wearing new and hand washed cloth masks, the bacteria filtration efficacy was tested using Staphylococcus aureus and Escherichia coli. Cotton cloth masks; single layer without pleats and with pleats, double layer with canvas filter in the middle, double layer with stiff filter in the middle, double layer with pleats on both sides and locally made and imported surgical masks and N95 respirators were used. Bacterial suspension was sprayed over outer surface and swabbed from inner surface at 0hrs, 4thhr, 8thhr and 12thhr. Similar procedure was performed to hand washed and ironed cotton cloth masks. After 24 hours of incubation, single layer without pleats and with pleats had no filtration efficacy(0-100%). Double layer with stiff filter in the middle and double layer with pleats on both sides had higher filtration efficacy(99.96-100%), this filtration efficacy remained up to three occasions of hand washing with soap and water, conferring protection up to 12hours. Filtration efficacy of surgical masks made locally, imported and N95 respirators were 90-100%, 99.99-100%, and 99.99-100% respectively.

Geopolymers are ecologically-friendly inorganic materials which can be produced at low temperatures from industrial wastes such as fly ash, blast furnace slags or mining residues. Although to date their principal applications have been as alternatives to Portland cement building materials, their properties make them suitable for a number of more advanced applications, including as photocatalytic nanocomposites for removal of hazardous pollutants from waste water or the atmosphere. For this purpose, they can be combined with photocatalytic moieties such as metal oxides with suitable bandgaps to couple with UV or visible radiation, or with carbon nanotubes or graphene. In these composites the geopolymers act as supports for the photoactive components, but geopolymers formed from wastes containing oxides such as Fe2O3 show intrinsic photoactive behaviour. This review discusses the structure and formation chemistry of geopolymers and the principles required for their utilisation as photocatalysts. The literature on existing photocatalytic geopolymers is reviewed, suggesting that these materials have a promising potential as inexpensive, efficient and ecologically-friendly candidates for the remediation of toxic environmental pollutants and would repay further development.

Cobalt ferrite nanoparticles (NPs) doped with rare earth (RE) metals with general formula CoFe_2-xRE_xO₄ (RE=Yb, Dy, Gd; x = 0.0 - 0.3) were synthesized by the co-precipitation method followed by post thermal treatment. The influence of RE doping on structural, magnetic and thermal properties and potential biomedical applications like magnetic hyperthermia has been investigated. In the as-prepared samples RE cations enter the spinel lattice as detected by X-ray diffraction. Thermal treatment leads to thermodynamically stable and relaxed single-phase spinel structures only for lower RE content, x = 0.01-0.05. However, annealed samples present higher mass magnetization values (M_S), up to 83 Am²/kg. RE content also affects M_S, especially in the case of annealed samples where it decreases linearly with x from about 80 Am²/kg (x = 0.01) to about 60 Am²/kg (x = 0.30). Thermal treatment induces a reduction in coercivity from 60-100 mT for as-prepared samples to 18-33 mT for annealed samples, in a nonlinear manner with respect to RE content. Heating efficiency, i.e., Specific Loss Power (SLP), of all samples has been studied using both magnetometric and calorimetric method to deeper examine the energy loss mechanisms involved.

This study examines whether government spending efficiency is associated with differential effects of public investment on debt-to-GDP ratio for a panel data consisting of 16 developing countries in Asia-Pacific region over the period 2007-2017. Public investment is central to implementing the UN 2030 Agenda for Sustainable Development — but high debt-to-GDP ratio poses a key risk. The empirical results indicate that public investment efficiency moderates debt-to-GDP ratio whereas public investment in the midst of public sector corruption accentuates debt-to-GDP ratio. The results have important policy implications.