In order to master the structure state of subway shield tunnel, reduce the diseases and avoid the potential safety hazards, the lateral convergence deformation of subway shield tunnels should be predicted. For the non-stationarity small sample size of subway shield tunnel lateral convergence deformation value, the existing prediction models have poor performance in terms of accuracy and stability. In this paper, a lateral convergence model of subway shield tunnel based on Kalman algorithm is constructed based on Kalman filtering theory. The model is efficient, adaptive and robust, and can accurately predict the lateral convergence deformation of subway shield tunnel. Taking the horizontal diameter of 200 rings shield segment in the interval section of a subway tunnel as an example, it is proved that the residuals of the Kalman prediction model are small, the residual distribution conforms to the normal distribution, and the prediction effect is great. The model is suitable for the prediction of more than 5 periods of data, and the prediction accuracy of the model is improved with the increase of the number of data periods. In addition, the Kalman model is compared with GM(1,1) model and GM-Markov model, and RMSE and MAPE are introduced as evaluation indexes. The results show that the Kalman model has higher prediction accuracy and is more suitable for predicting the lateral convergence deformation of subway shield tunnel.

In this paper, for the Reynolds-averaged Navier-Stokes equations, a self-closed turbulence model without any adjustable parameter is formulated and a simple model is proposed. The validation rule for self-closed turbulence model is rigorously derived from the Reynolds-averaged Navier-Stokes equation. The rule is not effected by turbulence modelling on the Reynolds stresses. As an application, two dimensional turbulent boundary layers, and plate turbulent boundary layers have been formulated.

The deployment of Electro-Mechanical Actuators plays an important role towards the adoption of the More Electric Aircraft (MEA) philosophy. On the other hand, a seamless substitution of EMAs in place of more traditional hydraulic solutions is still set back due to the shortage of real-life and reliability data regarding their failure modes. One way to work around this problem is providing a capillary EMA Prognostics and Health Management (PHM) system, capable of recognizing failures before they actually undermine the ability of the safety-critical system to perform its functions. The authors have developed a model-based prognostic framework for PMSM based EMAs leveraging a metaheuristic algorithm: Evolutionary (Differential Evolution (DE)) and swarm intelligence (particle swarm (PSO), grey wolf (GWO)) methods are considered. Several failures (dry friction, backlash, short circuit, eccentricity and proportional gain) are simulated thanks to a Reference Model, acting as a Numerical Test Bench, then detected and identified thanks to the envisioned prognostic method, which leverages a low fidelity Monitoring Model. The employed algorithms showed good results and prove that this strategy could be executed in pre-flight checks or during the flight at specific time intervals, with positive impacts on system safety and availability.

As a representative of Exponential Organizations, MI went from obscurity to the Fortune 500 in just ten years. Mi's success is inextricably linked to its outstanding business model. This paper summarizes the elements of MI's business model from four perspectives: value proposition, value creation, value delivery, and value capture, as well as its measures for developing into an exponential organization. Expecting to provide theoretical references for the transformation and upgrading of manufacturing organizations.

Eliashberg theory provides a theoretical framework for understanding the phenomenon of superconductivity when pairing between two electrons is mediated by phonons, and retardation effects are fully accounted for. However, when a direct Coulomb interaction between two electrons is also present, this interaction is only partially accounted for. In this work we use a well-defined Hamiltonian, the Hubbard-Holstein model, to examine this competition more rigorously, using exact diagonalization on a two-site system. We find that the direct electron-electron repulsion between two electrons has a significantly more harmful effect on pairing than suggested through the standard treatment of this interaction.

There is a growing need for novel in vitro corneal models to replace animal-based ex vivo test in drug permeability studies. In this study we demonstrate a corneal mimetic that models the stromal and epithelial compartments of human cornea. Human corneal epithelial cells (HCE-T) were grown on top of a self-supporting porcine collagen-based hydrogel. Cross sections of the multilayers were characterized by histological staining and immunocytochemistry of zonula occludens-1 protein (ZO-1) and occludin. Furthermore, water content and elastic properties of the synthetized collagen type I-based hydrogels were measured. The apparent permeability coefficient (Papp) values of a representative set of ophthalmic drugs were measured and correlated to rabbit cornea Papp values found in the literature. Multilayered structure of HCE-T cells and expression of ZO-1 and occludin in full thickness of multilayer were observed. The hydrogel-based corneal model exhibited excellent correlation to rabbit corneal permeability (r=0.96), whereas insert-grown HCE-T multilayer was more permeable and the correlation to the rabbit corneal permeability was lower (r=0.89). The hydrogel-based human corneal model predicts the rabbit corneal permeability more reliably in comparison to HCE-T cells grown in inserts. This in vitro human corneal model can be successfully employed for drug permeability tests whilst avoiding ethical issues and reducing costs.

EIMIs face the challenge of adapting to the Paris Agreement and the European Green Deal to achieve carbon neutrality. This change is being driven by consumer interest in low-carbon products, regulatory requirements from climate agreements and investors prioritizing sustainability. This pressure is pushing companies to go beyond short-term financial gains and integrate sustainability into their business. The growing awareness of the environmental impact of business models (BM) has fueled the development of Sustainable Business Models (SBMs). This study aims to link the discussion on the role of SBMs in the drivers of decarbonization, to improve the understanding of how the drivers can be integrated and enable new BMs for EIMIs. Based on a structured literature review, semi-structured interviews were conducted in the EIMIs. The study identifies BM-components that are influenced by these drivers and require sustainable business model innovation (SBMI). The results show that decarbonization drivers have a significant impact on all BM components. Experts emphasize the importance of collaborative approaches and cooperation throughout the value chain. This research elaborates on the importance of systematic analysis to understand how companies can effectively manage decarbonization drivers and suggests in-depth exploration within BM-research to uncover potential SBM design options.

A micromechanical model is implemented to indicate the progressive fatigue problem of a laminated composite with a central circular hole under fatigue loading based on a finite element model. The mechanical properties of the composite lamina are represented based on the characteristics of the fiber and the matrix through a micromechanics model. An appropriate algorithm is then adopted to simulate fatigue damage development in the composite lamina. According to this algorithm, the stress field of the composite subjected to fatigue load is initially obtained using the finite element method. Finally, the predicted results of the stresses in the constituents i.e. fiber and matrix are determined according to the micromechanical bridging model. Finally applying proper damage driving relations leads to damage degree in each element. The proposed model is proven to be successful in the observation of the fatigue behavior with stiffness degradation in each element of the composite in each cycle. Results are reported and validated using those micromechanical models and experimental data available in the literature.

In the DC distribution networks, DC bus voltage is maintained by the grid-connected converter, the controllability and reliability of the grid-connected converter significantly affects the bus voltage characteristic. To address the problem of limited stability and frequent oscillations, this paper proposes a state feedback control method for the AC/DC converter. Conventional AC/DC converter adopts the voltage-current double-closed-loop control structure with the proportional integral (PI) controllers, which is the equivalent of the typical type II control system, but the typical type II control system cannot fully settle the stability and immunity problems. In contrast, the state feedback control strategy not only achieves the control objectives of the traditional double-closed-loop control, but also reduce the AC/DC converter system model to a typical I-type system, which improves the stability, thus enhances the oscillation suppression capability of the bus voltage. By selecting multiple state variables and designing the converter pole configuration range, the proposed single-loop state feedback control method manages to optimize both the dynamic and steady-state performances of the grid-connected AC/DC converter. Finally, the effectiveness of the proposed single-loop state feedback control strategy has been verified by both the simulation and experiment results.

Non-alcoholic steatohepatitis (NASH), which is the most severe manifestation of non-alcoholic fatty liver disease (NAFLD), has been recognized as a major hepatocellular carcinoma (HCC) catalyst. However, the molecular mechanism of NAFLD-NASH-HCC sequence remains unclear and a specific and effective treatment for NASH has not yet been established. The progress in this field depends on the availability of reliable preclinical models which show the steady progress to NASH, liver cirrhosis, and HCC. However, most of NASH mouse models that have been described to date develop NASH generally for more than 24 weeks and there is an uncertainty of HCC development. To overcome such shortcomings of experimental NASH studies, we established a novel NASH-HCC mouse model with very high reproducibility, generality, and convenience. We treated male C57BL/6J mice with a newly developed choline-deficient and methionine-restricted high-fat diet (CDMRHFD) for 60 weeks. Treatment of CDMRHFD for 3 weeks revealed marked steatosis, lobular inflammation, and fibrosis, histologically diagnosed as NASH. Liver cirrhosis was observed in all mice with 36-week treatment. Liver nodule emerged at 12 weeks of the treatment, and diameter >2 mm liver tumors developed in all mice at 24 weeks of the treatment. In conclusion, our rapidly progressive and highly reproducible NASH-liver cirrhosis-HCC model is helpful for preclinical development and research on the pathogenesis of human NAFLD-NASH-HCC. Our mouse model would be useful for the development of novel chemistry for NASH-HCC-targeted therapies or HCC prevention strategies.

The extent of correlation or co-movement among the returns of developed and/or emerging stock markets remains pivotal for efficiently diversifying global portfolios. This correlation is prone to variation over time as a consequence of escalating economic interdependence fostered by international trade and financial markets. In this study, we analyzed the time-varying correlation and co-movement between the JSE.JO stock market of South Africa and its developed and developing stock market partners. The Dynamic Conditional Correlation - Exponential Generalized Autoregressive Conditional Heteroscedasticity (DCC-EGARCH) methodology is employed with different multivariate distributions to explore the time-varying correlation and volatilities between the JSE.JO stock market and its partners. Based on the conditional correlation results, the JSE.JO stock market is integrated and co-moves with its partners, and the conditional correlation for all markets exhibit time-variant behavior. The conditional volatility results show that the JSE.JO stock market behaves differently from other markets, especially after 2015, indicating a positive sign for investors to diversify between JSE.JO and its partners. The highest value of conditional volatility for markets was in 2020 during the COVID-19 pandemic, representing the riskiest period that investors should avoid due to the lack of diversification opportunities during crises.

Thermodynamic studies consider living entities as dissipative structures. Organisms maintain and develop an orderly structure by exchanging matter, energy, and entropy with the surrounding environment; thus, maintaining life and growth. For a single cell, the temperature, volume, content concentration, and content complexity are four control variables. For warm-blooded animals, both temperature and content concentration are assumed to be constant, and only volume and content complexity, i.e., various proteins, nucleic acids, and small molecular substances in the cell and their interactions, are considered as acting variables. Thus, the potential function of a single cell should conform to the cusp catastrophe model. As the studies on the specific mathematical models of the relationship between the volume and content complexity are not available, we could not propose specific methods for the specific variants of the potential function of this cusp catastrophe model. We could only present our approximate results based on the basic characteristics of the cusp catastrophe model. We speculated that when a single cell is in a stable state, it cannot undergo differentiation, dedifferentiation, and division. These behaviors occur only when the cell enters an unstable state. Based on this speculation, we divided somatic cells of warm-blooded animals into two types, namely stable cells and non-steady cells. If we consider a warm-blooded animal as a whole dissipative structure, its control variables should have steady-state cells, non-steady-state cells, and negative entropy input. If we assume that the negative entropy input is constant, the proportion of non-steady cells and the total number of cells can be used as the control variables of the potential function. For warm-blooded animals, their potential function also conforms to the cusp catastrophe model. Because the studies on the relationship between the proportion of non-steady-state cells and the total cell number are rare, we could not propose specific methods for the variation of the potential function of this cusp catastrophe model. We could only present our approximate results according to the basic characteristics of the cusp catastrophe model. We speculated that as individuals, animals should be in a stable state during development. Once they enter an unstable state, they will fall ill or die. For humans, the proportion of non-steady cells decreases during the growth process from a fertilized egg to old age. From the fertilized egg to adulthood, the total cell number increases; however, in old age, the total cell number begins to decrease gradually. The entire developmental curve will gradually enter an unstable state. We speculated that once the developmental curve of a human enters an unstable state, it is death for the elderly.

Queretaro is currently one of the states with the highest growth rate in the automotive industry. In the last five years, the number of companies has increased, reaching more than 300 small and medium-sized companies in the sector. However, they show a high degree of ignorance and lack of strategic foresight, which translates into poor planning in the short, medium and long term and low competitiveness, leading many of them to failure. This paper presents the results of a study within a strategic foresight evaluation with the development of a Structural Equation Model that allows the analysis of foresight and strategic planning within the automotive SMEs in the state of Queretaro. The study analyzes the necessary indicators to be evaluated and establishes the relationship of dependence between the variables, which is necessary to create the constructs of the model. It is confirmed that the adjustment of the model used is adequate for the evaluation of SMEs. The contributions of the research were: A theoretical contribution related to strategic foresight within SMEs and the construction of the structural equation model to evaluate strategic foresight in automotive SMEs in the state of Queretaro.

Aging is associated with a decline in immune system functionality. So-called immunosenescence may impair successful vaccination of elderly people. Thus, improved vaccination strategies specifically adapted to an aged immune system are required. We characterized a recombinant MVA expressing a stabilized version of SARS-CoV-2 S protein (MVA-ST) in an aged-hamster model for COVID-19. Intramuscular MVA-ST immunization resulted in protection from disease and severe lung pathology. Importantly, protection correlated with potent activation of SARS-CoV-2 specific T-cells and neutralizing antibodies. Our results suggest that MVA vector vaccines merit further evaluation as clinical candidate vaccines in elderly people to overcome limitations of age-dependent immunosenescence.

We investigate the behavior of thermal quantum coherence in the Heisenberg XXX model for a two-qubit system placed in independently controllable Inhomogeneous magnetic fields applied to two qubits respectively. We discuss the behavior of quantum coherence by systematically varying the coupling parameter, magnetic field, and temperature for both ferromagnetic and antiferromagnetic cases. The results show the interesting behavior of quantum coherence in a certain range of parameters. Generally, it is observed that quantum correlations decay with temperature, but in the ferromagnetic case with uniform magnetic interaction, it rises with temperature up to a certain threshold value and ultimately it decreases its value to zero. Moreover, it is observed that preserving the quantum coherence for small temperatures is very hard with the increasing magnetic field because, at small temperatures, quantum coherence decays sharply with the increase in magnetic field whereas at larger temperatures it decays completely at fairly large values of the magnetic field. The variation of quantum coherence with uniform magnetic field in the antiferromagnetic case is observed to be Gaussian for larger temperature but at zero or nearly zero temperature, it behaves as a constant function for uniform magnetic field up to a threshold value and then decays to zero with an infinite slope. This shows the signature of quantum phase transition from quantum nature to classicality.

Hemoconcentration membranes used in cardiopulmonary bypass require a pore structure design with high pure water permeability, and which does not allow protein adsorption and useful protein loss. However, studies on hemoconcentration membranes have not been conducted yet. The purpose of this study was to analyze three-dimensional pore structures and protein fouling before and after blood contact with capillary membranes using the tortuous pore diffusion model and a scanning probe microscope system. We examined two commercially available capillary membranes of similar polymer composition that are successfully used in hemoconcentration clinically. Assuming the conditions of actual use in cardiopulmonary bypass, we perfused these membranes with bovine blood. Pure water permeability before and after bovine blood perfusion was measured using the dead-end filtration. The scanning probe microscopy system was used for analysis. High-resolution three-dimensional pore structures on the inner surface of the membranes were observed before blood contact. On the other hand, pore structures after blood contact could not be observed due to protein fouling. The pore diameters calculated by the tortuous pore diffusion model and scanning probe microscopy were mostly similar and could be validated reciprocally. Achievable pure water permeabilities showed no difference despite protein fouling, leading to low values of albumin SC. This is due to the mechanism that protein fouling occurs on the membrane surface, while there is little internal pore blocking. Therefore, controlling the fouling is essential for membranes in medical use. These characteristics of the hemoconcentration membranes examined in this study are suitable for clinical use.

In this work, we propose a generalized partially functional linear model, which not only models the relationship between multiple scalar and functional predictors and response, but also automatically estimates the link function. Specifically, we use the functional principal component analysis method to reduce the dimensionality of functional predictors, estimate the regression coefficients using the maximum likelihood estimation method, estimate the link function using the method of local linear regression, iteratively obtain the final estimator, and prove the asymptotic normality of the estimator. The asymptotic normality is illustrated through simulation experiments. Finally, the proposed model is applied to study the influence of environmental, economic, and medical levels on life expectancy in China. In the study functional predictors are the daily air quality index, temperature, and humidity of 58 cities in 2020 and scalar predictors are GDP and number of beds in hospitals.

To achieve n-type doping in diamond, extensive investigations employing first principles have been conducted on various models of phosphorus doping and boron-phosphorus co-doping. The primary focus of this study is to comprehensively analyze the formation energy, band structure, density of states, and ionization energy of these structures. It is observed that within a diamond structure solely composed of phosphorus atoms, the formation energy of an individual carbon atom is excessively high. However, the substitution of two carbon atoms leads to the conversion of diamond into a p-type semiconductor. Upon examining the P-B co-doping structure, it is revealed that the doped impurities exhibit a tendency to form more stable cluster configurations. As the separation between the freely doped atoms and the cluster impurity structure increases, the overall stability of the structure diminishes, consequently resulting in an elevation of the ionization energy. Analysis of the electronic density of states demonstrates that the electron orbit of the B atom makes negligible contributions to the impurity levels during P-B doping.

The development of a Digital Track Model (DTM) within Kazakhstan's railway system presents an innovative approach to enhancing efficiency and safety across the network. This paper investigates the economic viability of DTM implementation, offering a comprehensive mathematical model that highlights potential reductions in maintenance costs and improvements in system accuracy and durability. The findings advocate for DTM's potential to significantly elevate railway operations, suggesting a pivotal step towards modernizing Kazakhstan's transit infrastructure.

It is very difficult to accurately divide farmland and woodland in Gaofen 2 (GF-2) remote sensing image, because their single plant coverage is very small, and their spectra are very similar. The ratio of spatial resolution and one plant’s coverage area must be fully taken into account when designing the Convolutional Neural Network structure for extracting them from GF-2 image. We establish a Convolutional Encode Neural Networks model (CENN), The first layer has two sets of convolution kernels to learn the characteristics of farmland and woodland respectively, while the second layer is the encoder to encode the characteristics by transfer function, which can map the results to the corresponding category number. In the training stage, samples of farmland, woodland, and other categories are categorically used to train CENN, as soon as training is accomplished, CENN would acquire enough ability to accurately extract farmland and woodland from remote sensing images. The final extraction result is obtained by implementing per-pixel segmentation of images used to train the CENN. CENN is compared and analyzed with others such as Deep Belief Network (DBN), Full Convolutional Network (FCN), Deeplab Model. The results of experiments show that CENN can more accurately mine the characteristics of farmland and woodland, and it achieves its goal of extracting farmland and woodland with high precision from GF-2 images.

This paper delves into the dynamics of asset pricing within Bachelier’s market model (BMM), elucidating the representation of risky asset price dynamics and the definition of riskless assets. It highlights the fundamental differences between BMM and the Black-Scholes-Merton market model (BSMMM), including the extension of BMM to handle assets yielding a simple dividend. Our investigation further explores Bachelier’s term structure of interest rates (BTSIR), introducing a novel version of Bachelier’s Heath-Jarrow-Morton model and adapting the Hull-White interest rate model to fit BMM. The study concludes by examining the applicability of BMM in real-world scenarios, such as those involving environmental, social, and governance (ESG)-adjusted stock prices and commodity spreads.

The Model-View-Controller (MVC) architecture, a cornerstone of modern software engineering, offers a robust framework for developing dynamic user interfaces. This paper conducts a broad analysis of MVC’s deployment across various sectors, emphasizing its critical role in technological advancement and market integration. By examining implementation strategies in web development, mobile applications, and enterprise solutions, the study illustrates how MVC enhances application manageability, promotes efficient code reuse, and facilitates parallel development. The paper explores the adoption of MVC principles within major technologies such as Java, .NET, and JavaScript frameworks, underlining its widespread acceptance. Additionally, the analysis covers the preferential use of MVC frameworks within diverse market sectors including technology enterprises, educational institutions, e-commerce, and financial services, which leverage MVC for superior data management and user experience. Emerging trends such as the shift towards the Model-View-ViewModel (MVVM) architecture and the integration of MVC with artificial intelligence and machine learning technologies are also discussed. This comprehensive review not only reaffirms MVC’s enduring relevance but also its adaptive evolution in response to emerging technological demands and market needs.

In the application domain, accurate word sense identification is crucial for improving the performance of machine translation, information retrieval and end-to-end communication tasks. However, word polysemy is a major obstacle to accurate semantic identification. Therefore, word semantic disambiguation has always been one of the key challenges in natural language processing and has attracted the attention of a large number of researchers. This research proposes an innovative disambiguation algorithm based on the large-scale Bert model and the Polly encoder framework, and introduces WordNet as a benchmark for word semantic. By exploiting the ability of the pre-trained model to extract and learn semantic information, and using a specially designed forward propagation algorithm and loss function to fine-tune the large-scale Bert model, the model has high Accuracy and robustness. In this research, several experiments were conducted on the Semcor 3.0 semantic dataset. The experimental results show that the model proposed in this research shows excellent performance on the Semcor test set, with an Accuracy of 86.1% and an F1 score of 0.847, which is a significant improvement over the traditional model.

Idiopathic scoliosis (IS) is an unexplained dysplasia of the spine that can occur at any age, with idiopathic scoliosis making up the largest proportion of the total population worldwide, approximately 2-3%. Scoliosis is not just a cosmetic defect, but the development of the spinal deformity can lead to cardiovascular and respiratory lesions, often resulting in serious health problems. Treatment of the condition usually involves major surgery, which is both a physical and financial burden for patients. In order to clarify the aetiology of IS and provide a theoretical basis for new diagnostic and treatment methods IS, it is important to use different animal models for experiments. Zebrafish is an emerging model animal with a short reproductive cycle, minimal breeding expenses, and other beneficial traits including in vitro fertilisation, in vitro development, and embryo transparency. As a result, genetic alteration and observation are simpler than with traditional model animals. This study examines the history of animal models for IS research, focuses on the benefits and drawbacks of zebrafish as an IS model and the advances it provides to IS research, and anticipates zebrafish application prospects in IS research.

This paper proposes an imperfectly vaccinated SVEIR model for latent age. We calculate the equilibrium points and basic reproduction number of the model. The asymptotic smoothness, uniform persistence and the existence of the attractor of the semi-flow generated by the solutions of the system are addressed. Moreover, using LaSalle’s invariance set principle and constructing Volterra-type Lyapunov functions, we can prove the global asymptotic stability of both the disease-free equilibrium and the endemic equilibrium of the model. The conclusion is that if the basic reproduction number R0 is less than one, the disease will gradually disappear. On the other hand, if the number is greater than one, the disease will become endemic and persist. Finally, measures that can effectively control the ongoing transmission of the disease have been obtained.

In this note, we provide some effective treatments of a general linear model with adding-up restrictions via algebraic operations of given vectors and matrices in the model, including analytic expressions of the well-known ordinary least-squares estimator (OLSE) and the best linear unbiased estimator (BLUE) of the unknown parameters in the model.

Cardiac hypertrophy is an important and independent risk factor for the development of heart failure. To better understand the mechanisms and regulatory pathways involved in cardiac hypertrophy, there is a need for improved in vitro models. In this study, we investigated how hypertrophic stimulation affected human induced pluripotent stem cell (iPSC)-derived cardiomyocytes (CMs). The cells were stimulated with endothelin-1 (ET-1) for 8, 24, 48, 72, or 96h. Parameters including cell size, ANP-, proBNP-, and lactate concentration were analyzed. Moreover, transcriptional profiling using RNA-sequencing was performed to identify differentially expressed genes following ET-1 stimulation. The results show that the CMs increase in size by approximately 13% when exposed to ET-1 in parallel to increases in ANP and proBNP protein and mRNA levels. Furthermore, the lactate concentration in the media was significantly increased indicating that the CMs consume more glucose, a hallmark of cardiac hypertrophy. Using RNA-seq, a hypertrophic gene expression pattern was also observed in the stimulated CMs. Taken together, these results show that hiPSC-derived CMs stimulated with ET-1 display a hypertrophic response. The results from this study also provide new molecular insights about the underlying mechanisms of cardiac hypertrophy and may help accelerate the development of new drugs against this condition.

Sustainability addresses environmental and social issues affecting this and future generations. When family businesses perceive that the community is disrupted, recognize an environmental problem and respond by implementing new environmental policies or regulations, the family business’s socio-emotional values press to transition to a more sustainable production system, such as the ‘Circular Economy.’ Drawing on the Dubin (1978) methodology—a paradigm for building models through deduction—we design a sustainable model, which shows family businesses’ responses to changes in the environment. It explains the reasons why family firms transition to the Circular Economy, based on the theory of Socio-Emotional Wealth (SEW). We check the model through the case study of the food retail leader in the Spanish market—Mercadona—which applies policies about energy, resources and waste to become a Circular Economy business model. Because of the strong family character of Mercadona, this case can be useful for the decision-making of other family businesses.

Based on the fractional order of nonlinear system for love model with a periodic function as an external force, analyzed the characteristics of the chaotic dynamic in this study. The relationship between the chaotic dynamic of the fractional-love model with the external force and the fractional-order system was analyzed when the parameters are fixed. Further, we also studied the relationship between the chaotic systemic dynamic and the parameters when the fractional-order system is fixed. The results show that when the parameters are fixed, the fractional-order system exhibited segmented chaotic states for the different fractional orders of the system. When fixed the fractional-order system, the system exhibited the periodic and chaotic states as parameter changes.

Machine Learning is increasingly and ubiquitously being used in the medical domain. Evaluation metrics like accuracy, precision, and recall may indicate the performance of the models but not necessarily the reliability of their outcomes. This paper assesses the effectiveness of a number of machine learning algorithms applied to an important dataset in the medical domain, specifically, mental health, by employing explainability methodologies. Using multiple machine learning algorithms and model explainability techniques, the project provides insights into the model workings to help determine the reliability of the machine learning algorithm predictions. The results are not intuitive. It was found that the models were focusing significantly on less relevant features and at times, unsound ranking of the features to make the predictions. The paper therefore argues that it is important for research in applied machine learning to provide insights into explainability of the models in addition to other performance metrics like accuracy. This is particularly important for applications in critical domains such as healthcare. A future direction is to investigate methods to quantify the effectiveness of the machine learning models in terms of the insights from their explainability.

In this work, we propose a generalized partially functional linear regression model with an interaction term between functional predictors. The estimators of the regression coefficient of scalar predictors and regression coefficient functions of functional predictors and their interactions are obtained. The asymptotic property of the estimators is established. Extensive simulation studies illustrate the asymptotic results. Finally, the proposed model was applied to investigate the influence of air qualities, climate factors, medical and social indicators and the interactions on cancer incidence which is a binary response.

Cosmography, as an integral branch of cosmology, strives to characterize the Universe without relying on pre-determined cosmological models. This model-independent approach utilizes Taylor series expansions around the current epoch, providing a direct correlation with cosmological observations and the potential to constrain theoretical models. Various observable quantities in cosmology can be described as different combinations of cosmographic parameters. Furthermore, one can apply cosmography to models with a varying speed of light. In this case, the Hubble parameter can be expressed by the same combination of cosmographic parameters for both the standard model and varying speed of light models. However, for the luminosity distance, the two models are represented by different combinations of cosmographic parameters. Hence, luminosity distance might provide a method to constrain the parameters in varying speed-of-light models.

Ransomware is one of the most dangerous types of malware, which is frequently intended to spread through a network to damage the designated client by encrypting the client’s vulnerable data. Conventional signature-based ransomware detection technique falls behind because it can only detect known anomalies. When it comes to new and non-familiar ransomware traditional system unveils huge shortcomings. For detecting unknown patterns and sorts of new ransomware families,behavior-based anomaly detection approaches are likely to be the most efficient approach. In the wake of this alarming condition, this paper presents an ensemble classification model consisting of three widely used machine learning techniques that include Decision Tree (DT), RandomForest (RF), and K-nearest neighbor (KNN). To achieve the best outcome ensemble soft voting and hard voting techniques are used while classifying ransomware families based on attack attributes. Performance analysis is done by comparing our proposed ensemble models with standalone models on behavioral attributes based ransomware dataset..

Background: In the field of brain-computer interfaces, neural decoding plays a crucial role in translating neural signals into meaningful physical actions. These signals are transmitted to processors for decoding via wired or wireless channels, often encountering data loss, commonly referred to as "packet loss." Despite its importance, the impact of different types and degrees of packet loss on neural decoding has yet to be comprehensively studied. Understanding this impact is critical for advancing neural signal processing and data filtering. Methods: This paper addresses this gap by constructing four distinct packet loss models, simulating congestion packet loss, distributed packet loss, and burst packet loss scenarios. Using macaque superior arm-movement decoding experiments, we evaluate the effects of these packet loss types on decoding performance. Results: Our findings reveal that continuous burst packet loss significantly degrades decoding performance at the same packet loss probability, and decoding parameters that are sensitive to data continuity are more heavily impacted by packet loss. Conclusions: This study provides an analysis of the relationship between packet loss and neural decoding results, offering valuable insights for future strategies aimed at preventing and handling packet loss in neural signal acquisition.

Disassembly is a pivotal technology to enable the circularity of electric vehicle batteries by applying circular economy strategies that extend the life cycle of their components, like remanufacturing and repurposing, or by using efficient recycling to reintegrate the gained materials in producing new battery systems. This paper aims to develop a multi-method self-configuring simulation model for investigating disassembly scenarios while considering the battery design as well as the configuration and layout of the disassembly station. We demonstrate the developed model in a case study using a battery of Mercedes-Benz and the automated disassembly station of the project DeMoBat at Fraunhofer IPA. Furthermore, we introduce two disassembly scenarios, the component-oriented and the accessibility-oriented disassembly, and compare them using the simulation model to determine several indicators, such as the frequency of tool change, the number and distribution of robot routes, the tool utilization, and the disassembly time.

It is important for food recognition to separate each ingredient within a food image at the pixel level. In this paper, we propose a new approach to segment ingredients by utilizing a CNN-based Single-Ingredient Classification Model. In detail, we firstly introduce a standardized biological-based hierarchical ingredient structure and construct a single-ingredient image dataset based on this structure. Then, we build a single-ingredient classification model based on a novel convolutional neural network (CNN) architecture that utilizes an attention mechanism. Afterwards, we propose a new framework for segmentation using the above single-ingredient classification model as the backbone. In this framework, two methods are involved in segmenting ingredients in the food images. We introduce five evaluation metrics (IoU, Dice, Purity, Entirety, Loss of GTs) to assess the performance of ingredient segmentation in terms of ingredient classification. Extensive experiments demonstrate the effectiveness of the proposed method, achieving an maximal mIoU of 0.65, mDice of 0.77, mPurity of 0.83, mEntirety of 0.80, and mLoGTs of 0.06 on the FoodSeg103 dataset. The results confirm that our CNN-based architecture achieves higher segmentation performance compared to ResNet18 and EfficientNet-B0 when used as the backbone for ingredient segmentation. We believe that our ingredient segmentation approach lays the foundation for subsequent ingredient recognition.

In this paper, the forecast horizon and solar variability influences on MHFM model based on multiscale decomposition, AR and NN models, are studied. This article follows the works published in [1] showing the performance of the MHFM using 3 multiscale decomposition methods and a forecast horizon equal to 1 hour. Several forecast horizon strategies and his influence on the MHFM performances are investigated. We show that the best strategy for a rRMSE variying from $4.43\%$ to $10.24\%$ is obtained for forecast horizons from $5$ minutes to $6$ hours. In a second part, the solar variability influence on the MHFM is studied. A classification based on a shows that the best performance of MHFM is obtained for clear sky days with a rRMSE of $2.91\%$ and worst for cloudy sky days with a rRMSE of $6.73\%$.

The new Post Accelerating Data and Knowledge Online Society, or ‘Padkos’ requires a new model of decision making. This introductory paper proposes a model where decision making and learning are a single symbiotic process, incorporating man and machine, as well as the AADD (ánthrōpos, apparatus, decider, doctrina) diamond model of individual and organizational decision-making and learning processes. The learning is incorporated by using a newly proposed quadruple loop learning model. This model allows for controlled changes of identity, the process of creating and the sense making of new mental models and assumption, and reflections. The model also incorporates the recently proposed model of quantum decision-making, where time collapse of the opted past and the anticipated future (explicitly including its time horizon) into the present play a key role in the process, leveraging decision-making and learning by human as well as Artificial Intelligence (AI) and Machine Learning (ML) algorithms. The paper closes with conclusions.

We present a finite element model updating technique for soil-structure system identification of the Millikan Library building using the seismic data recorded during the 2002 Yorba Linda earthquake. A detailed finite element (FE) model of the Millikan Library building is developed in OpenSees and updated using a sequential Bayesian estimation approach for joint parameter and input identification. A two-step system identification approach is devised. First, the fixed-base structural model is updated to estimate the structural model parameters (including effective elastic modulus of structural components, distributed floor mass, and Rayleigh damping parameters) and some uncertain components of the foundation-level motion. Then, the identified structural model is used for soil-structure model updating wherein the Rayleigh damping parameters, the stiffness and viscosity of the soil subsystem (modeled using a substructure approach), and the foundation input motions (FIMs) are estimated. The identified model parameters are compared with state-of-practice recommendations. While a specific application is made for the Millikan Library, the present work offers a framework for integrating large-scale FE models with measurement data for model inversion. By utilizing this framework for different civil structures and earthquake records, key structural model parameters can be estimated from the real-world recorded data, which can subsequently be used for assessing and improving, as necessary, state-of-the-art seismic analysis and structural modeling techniques. This paper presents an effort towards using real-world measurements for large-scale FE model updating in the soil and structure, uniform soil time domain for joint parameter and input estimation, and thus paves the way for future applications in system identification, health monitoring and diagnosis of civil structures.

As modern systems are becoming more complex their control strategy cannot longer relay only on measurement information that usually comes from probes but also from mathematical models. Those systems models can lead to unbearable computation times due to their own complexity, turning the control process non-viable, which leads to the implementation of surrogate models that enable to achieve estimates within acceptable time to take decisions. A control trained with Deep Reinforcement Learning algorithm, using a Physics-Informed Neural Network to obtain the temperature map on the following time step, replaces the need of running Direct Numerical Simulations. On this work we considered an 1D heat conduction problem, which temperature distribution feeds a control system to activate a heat source aiming to obtain a constant, previously defined, temperature value. With this approach, control training becomes much faster without the need of performing numerical simulations or laboratory measurements, as well the control is taken based on Neural Network enabling its implementation on simple processors to edge computing.

The Xihan River basin is located in the southern part of Gansu Province, where flood disasters occur frequently in summer and autumn, which easily pose significant risks to human life. In order to improve the accuracy of flood disaster predictions and early warnings, a flood model suitable for this region was constructed based on the HEC-HMS (Hydrologic Engineering Center's-hydrologic modeling system) model and used to determine the critical areal rainfall for flood disasters. Calibration of this model was performed using data of four flood events from May to October between 2020 and 2021, reserving data of two additional flood events for model validation. Using the calibrated HEC-HMS model, the critical areal rainfall was determined for the Pingluo and Tanjiaba hydrological stations in the basin through the model testing method. The results indicate that: (1) The stable infiltration rate of the XiHanShui River Basin was between 0.06 and 0.10 mm/h, with runoff concentration times primarily varying from 22.5 to 24.1 hours, a direct runoff storage coefficient was 0.2 hours, and a base flow index decay constant seted at 0.03 hours. (2) During the calibration and validation periods, the average peak flow relative error was 7.56%, the average runoff volume relative error was 14.76%, the average peak occurrence time difference was -0.5 hours, and the Nash efficiency coefficient was 0.769. (3) The warning areal rainfall for the Pingluo and Tanjiaba hydrological stations were 108.1mm and 128.5mm, and the guaranteed areal rainfall were 230.8mm and 184.6mm. The HEC-HMS model demonstrated high applicability and accuracy in simulating flood events in the XiHanShui River Basin, providing technical support for hydrological research and operational applications in the region.

The material undergoes high temperature and high strain rate deformation process during cutting process, may induce the dynamic recrystallization behavior and result the evolution of dynamic mechanical properties of the material to be machined. In this paper, the modified Johnson-Cook(J-C) model for Nickel based powder metallurgy superalloy considering dynamic recrystallization behavior in high strain rate and temperature is proposed. The dynamic mechanical properties of the material under different strain rates and temperature conditions are obtained by quasi-static compression test and split Hopkinson pressure bar (SHPB) test. The coefficients of the modified J-C model are obtained by linear regression method. The modified model is verified by comparison with experimental and model prediction results. The results show that the modified J-C model proposed in this paper can accurately describe the mechanical properties of nickel-based powder metallurgy superalloys at high temperature and high strain rate. Which provides help for studying the cutting mechanism and finite element simulation of nickel-based powder metallurgy superalloy.

Polymethyl methacrylate (PMMA) polymer is widely used in various fields today. In order to thoroughly reveal the structural impact performance of PMMA materials, this paper is based on the comprehensive Johnson-Cook constitutive model and damage failure model, and accurately confirm the J-C constitutive and damage failure model parameters of PMMA through material test data, The dynamic process of steel bullet impacting PMMA plate structure is analyzed by finite element software ABAQUS. The calculation results show that the numerical simulation results in this paper are in good agreement with the experimental test data. Therefore, the feasibility and accuracy of the impact analysis of PMMA structures based on J-C constitutive and damage failure models in this paper are studied. Finally, based on the J-C constitutive model and damage failure model, the variation of the residual velocity of the bullet with the PMMA plate thickness is analyzed in depth, that is, the results show that the residual velocity of the bullet has a certain linear relationship with the plate thickness.

We study the validity of quantum Fisher information (QFI) as a faithful quantum coherence and correlation quantier by drawing a comparison with subsystem's coherence measure, rst-order coherence (FOC) and the entanglement measure, Negativity to study the behavior of thermal quantum coherence and correlations in two qubit Heisenberg XXX model, placed in independently controllable magnetic eld by systematically varying the coupling parameter, magnetic eld and bath temperature for ferromagnetic and antiferromagnetic case. After carefully observing the prole of quantum coherence and correlation measures, we propose an inequality relations which shows that there may exist a quantitative relationship between QFI, Negativity and FOC in which, the equality exists at zero temperature. We identify QFI to be a more useful coherence quantier, as it quanties coherence of individual subsystems and correlations among the subsystems. On the other hand, FOC identies coherence present in the individual subsystems only. A reciprocal relationship between Negativity and FOC is also observed in dierent cases. We also observe the existence of entanglement in ferromagnetic case, in contrast to simple Heisenberg XXX model in uniform magnetic eld. We show that in the ferromagnetic case, a very small inhomogeneity in magnetic eld is capable of producing large values of thermal entanglement. This shows that the behavior of entanglement in the ferromagnetic Heisenberg system is highly unstable against inhomogeneity of magnetic elds, which is inevitably present in any solid state realization of qubits.

The representation of aerosols in climate-chemistry models is important for air quality and climate change research, but it can require significant computational resources. To overcome this, simpler modules such as modal aerosol modules with three lognormal modes (MAM3) can be used. In this study, the coupling of the Carbon Bond Mechanism, version Z (CBMZ), and MAM3 chemistry modules in WRF-CAM5 was improved by adding biomass-burning emissions to both gas- and particle-phase chemistry and incorporating a conversion mechanism between volatile organic compounds (VOCs) and secondary organic carbons (SOCs). The study conducted six simulations over the western U.S. and northeastern Pacific region and compared the model’s performance with observational benchmarks such as reanalysis, ground-based, and satellite data. The results showed that the model with enhanced chemistry capabilities had a 31% and 58% reduction in root-mean-square errors (RMSE) for black carbon (BC) and organic carbon (OC) surface concentrations, respectively. The earlier release of the WRF-CAM5 version had two deficiencies that were addressed in this study. This research highlights the importance of accurate aerosol representation in climate-chemistry models for improving accuracy and reducing errors in simulations.

Understanding the interrelationships between land use, climate change, and regional water yield is critical for effective water resource management and ecosystem protection. However, comprehensive insights into how water yield evolves under different land use scenarios and climate change remain elusive. This study employs the Integrated Valuation of Ecosystem Services and Trade-offs (InVEST) models, Patch-generating Land Use Simulation (PLUS) model, and Geodetector within a unified framework to evaluate the dynamics of land use, water yield, and their relationships with various factors (meteorological, social, economic, etc.). To forecast the Land Use/Cover Change (LUCC) pattern of the Yellow River Basin by 2030, three scenarios were considered: economic development priority (Scenario1), ecological development priority(Scenario2), and cropland development priority(Scenario3). Climate change scenarios were constructed using CMIP6 data, representing low stress (SSP119), medium stress (SSP245), and high stress (SSP585) conditions. The results show the following: (1) From 2000 to 2020, cropland was predominant in the Yellow River Basin, Henan Province, with significant land conversion to impervious land (construction land) and forest land; (2) Water yield changes during this period were primarily influenced by meteorological factors, with land use changes having negligible impact; (3) By 2030, the water yield of Scenario1 is highest among different land use scenarios, marginally surpassing ecological development priority by 0.5%; (4) Climate scenarios reveal significant disparities, with SSP126 yielding 67% higher water production than SSP245, driven predominantly by precipitation; (5) Geodetector analysis identifies precipitation as the most influential single factor, with significant interactions among meteorological and socio-economic factors. These findings offer valuable insights for policymakers and researchers in formulating land use and water resource management strategies.

Good communication skills are essential for prospective workers, particularly college students, to clearly convey their abilities and understanding during job interviews. Despite the high demand for strong communication skills among employers, many students struggle with inadequate experience and skills, leading to reduced confidence and lower chances of securing desired jobs. Existing tools and resources for improving communication skills are limited, especially free ones, leaving students underprepared and less confident in interviews. To address this issue, a comprehensive solution is needed that provides free, customizable tools to enhance students' interview communication skills. Invisor is a web-based self-interview training application that leverages AI and Machine Learning to analyze users' behavior, responses, and facial expressions during simulated interviews. Accessible via desktop, laptop, or mobile devices, Invisor offers interactive and voice-recorded feedback to help students prepare for interviews effectively. By employing AI technologies, Invisor generates personalized interview questions based on job descriptions, enhancing the realism of the interview experience and providing tailored feedback to improve users' responses. Developed using agile methodologies, Invisor has undergone iterative enhancements, integrating user and stakeholder feedback promptly to improve usability and functionality. The combination of AI-driven simulations and agile development practices enables Invisor to meet current user needs and anticipate future demands, providing a robust tool for interview preparation in a competitive job market. This paper outlines the development and implementation of Invisor, demonstrating its effectiveness in enhancing interview skills and confidence among students and job seekers.

In this study, a cholera infection model with the bilinear infection rate is developed by considering the perturbation of the infection rate by the mean-reverting process. First of all, we give the existence of a globally unique positive solution for a stochastic system at arbitrary initial value. On this basis, the sufficient condition for the model to have an ergodic stationary distribution is given by constructing proper Lyapunov functions and tight sets. This indicates in a biological sense the long-term persistence of cholera infection. Furthermore, after transforming the stochastic model to an relevant linearised system, an accurate expression for the probability density function of the stochastic model around a quasi-endemic equilibrium is derived. Subsequently, the sufficient condition to make the disease extinct is also derived. Eventually, the theoretical findings are shown by numerical simulations. Numerical simulations show that the impact of regression speed and fluctuation intensity on stochastic systems.

The territory of Serbia is vulnerable to various types of natural and man-made disasters. The risk is not equal across the entire territory, depending on the type of hazard and the expected potential for damage. So far, the level of community disaster resilience has not been determined in Serbia. There are no scientific preconditions for its improvement to reduce the future material and intangible consequences of disasters. Regarding that, the project’s main objective is to develop and validate a predictive model of community disaster resilience based on social identity influences through an investigation impact of social identity indicators on the level of community disaster resilience in Serbia. The project is based on the upcoming research on whether the level of community disaster resilience can be predicted based on social identity indicators, how social identity indicators affect different dimensions of community disaster resilience, and how disasters shape social identity. The project is based on multimethod research in which quantitative (face-to-face interviews in 40 of the 191 municipalities), and qualitative (semi-structured interviews) research methodology will be applied. A developed predictive model with an index of community disaster resilience in Serbia will empower the creation of preconditions for designing public policies, strategies and procedures for improving resilience and reducing the consequences of disasters on people and their property and enhancing citizens’ security. The project will encourage the prediction of community disaster resilience based on social identity indicators, improving disaster foresight and preparing to limit disaster losses. Based on the development of analytical frameworks for understanding community disaster resilience and social identity in disasters, essential preconditions for designing innovative information systems will be created to enable local communities to increase their level of resilience.

Sea surface wind forecasts in the Adriatic Sea often suffer for unadequate modelling, especially for the wind speed. This has detrimental effects on the accuracy of sea level and storm surge predictions. We present a numerical method to reduce the bias between the sea surface wind observed by the scatterometers and that supplied by the European Centre for Medium-Range Weather Forecasts (ECMWF) global atmospheric model, for storm surge forecasting applications. The method, called “wind bias mitigation”, relies on scatterometer observations to determine a multiplicative factor ∆ws which modulates the standard model wind in order to decrease the bias between scatterometer and model. We compare four different mathematical approaches to this method, for a total of eight different formulations of the multiplicative factor ∆ws. Four datasets are used for the assessment of the eight different bias mitigation methods: a collection of 29 Storm Surge Events (SEVs) cases in the years 2004-2014, a collection of 48 SEVs in the years 2013-2016, a collection of 364 cases of random sea level conditions in the same period, and a collection of the seven SEVs in 2012-2016 that were worst predicted by the Centro Previsioni e Segnalazioni Maree, Comune di Venezia (Tide Forecast and Early Warning Centre of the Venice Municipality - CPSM). The statistical analysis shows that the bias mitigation procedures supplies a mean wind speed more accurate than the standard forecast, when compared with scatterometer observations, in more than 70% of the analyzed cases.

Zebrafish is an excellent model for observing human genetic disorders. Hearing impairment is the most common genetic disorder including syndromic & non-syndromic hearing loss. Stem cell therapies are considered a new hope in case of hearing impairment. Stem cells are the master cells of the human body and having the capability to differentiate into any other form of cells in more than 200 types of cells (regeneration). This review article describes zebrafish as a biomedical model for stem cell research in hearing impairment, which revolutionized the biomedical arena to compete for the challenges.

In this study, based on our previous study, we examined the mathematical properties, especially the stability of the equilibrium for our proposed mathematical model. By means of the results of the stability in this study, we also used actual data representing transient booms and resurgent booms, and conducted parameter estimation for our proposed model using Bayesian inference. In addition, we conducted a model fitting to five actual data. By this study, we reconfirmed that we can express the resurgences or minute vibrations of actual data by means of our proposed model.

In this study, the model proposed by Yang et al. to generalize the stress–strain model for unconfined concrete with consideration of the size effect is expanded. Sim et al.’s compressive strength model that is based on the function of specimen width and aspect ratio was used for the maximum stress. In addition, a strain at the maximum stress was formulated as a function of compressive strength by considering the size effect using the regression analysis of datasets compiled from a wide variety of specimens. The descending branch after the peak stress was formulated with consideration of less dissipated area of fracture energy with the increase in specimen width and aspect ratio in the compression damage zone (CDZ) model. The key parameter for the slope of the descending branch was formulated as a function of specimen width and aspect ratio, concrete density, and compressive strength of concrete considering the size effect. Consequently, a rational stress–strain model for unconfined concrete was proposed. This model explains the trends of the peak stress and strain at the peak stress to decrease and the slope of the descending branch to increase, as the specimen width and aspect ratio increase. The proposed model agrees well with the test results, irrespective of the compressive strength of concrete, concrete type, specimen width and aspect ratio. In particular, the proposed model for the stress–strain curve rationally considered the effect of decreasing peak stress and increasing the descending branch slope, with the increase in specimen width and aspect ratio.

A comprehensive kinetic model of the Fischer-Tropsch synthesis (FTS) is developed in a fixed bed reactor under operating conditions (temperature, 230–235°C, pressure, 20–25 bar, gas hourly space velocity, 4000–5000 cm³(STP)/h/g_catalyst ,H₂/CO feed molar ratio, 2.1) over a Co based catalyst. Reaction rate equations based on Eley-Rideal (ER) type model for initiation step and Langmuir-Hinshelwood-Hougen-Watson (LHHW) type model for propagation and termination steps of the FTS reactions have been considered and the readsorption of olefins were taken into account. The model that was reported in the literature was modified in order to explain many significant deviations from the ASF distribution. Optimum parameters have been obtained by Genetic Algorithms (GA). The calculated activation energies to produce n-paraffins and 1-olefins were in the range of 82.24 to 90.68 kJ/mol and 100.66 to 105.24 kJ/mol, respectively. The hydrocarbon distribution in FTS reactions was satisfactorily predicted particularly for paraffins.

Exploiting the van der Waals model of liquids, it is possible to derive analytical formulas for the thermodynamic functions governing solvation, the transfer of a solute molecule from a fixed position in the ideal gas phase to a fixed position in the liquid phase. The solvation Gibbs free energy change consists of two contributions: (a) the high number density of all liquids and the repulsive interactions due to the basic fact that each molecule has its own body lead to the need of spending free energy to create a cavity suitable to host the solute molecule; (b) the ubiquitous intermolecular attractive interactions lead to a gain in free energy for turning on attractions between the solute molecule and surrounding liquid molecules. Also the solvation entropy change consists of two contributions: (a) there is an entropy loss in all liquids because the cavity presence limits the space accessible to liquid molecules during their continuous translations; (b) there is an entropy gain in all liquids, at room temperature, due to the liquid structural reorganization as a response to the perturbation represented by solute insertion. The latter entropy contribution proves to be balanced by a corresponding enthalpy term. This scenario emerged from the van der Waals model is in qualitative agreement with experimental results.

The main purpose of this paper is to propose a novel optimization model with a new machine learning approach in the first section to achieve the best results in financial institutions in the second section. Since the constancy of efficacy derived from parametric and non-parametric is not significant, this paper provides a scientific assessment at the optimization section and proposes a novel combined parametric and non-parametric model which will be a new experiment in literature perception. A scientific assessment of banks based on a combination of the efficiency measurement method of CCR(Charnes, Cooper and Rhodes model) or CRS(Constant Return to Scale) BCC(Banker, Charnes, and Cooper model) or VRS (Variable Return to Scale) in Data Envelopment Analysis (DEA), as well as Stochastic Frontier Approach (SFA) for 65 banks during Feb to July 2020, are introduced. For analyzing the performance of the parametric and non-parametric approaches we have considered the linear regression and Unreplicated Linear Functional Relationship (ULFR). At the machine learning section, a novel four-layers data mining filtering pre-processes for selected supervised classification as well as unsupervised clustering algorithms to increase the accuracy and to remove unrelated attributes and data are applied. For the four kinds of preprocessing approaches of unsupervised attributes, supervised attributes, supervised instances, and unsupervised instances, we have chosen discretization, attribute selection, stratified remove folds, and resample filters respectively. Based on the nature of the suggested financial institution's dataset and attributes, the most appropriate preprocessing filter in each layer to achieve the highest performance is suggested. Finally, the superior bank, best performance model, and the most accurate algorithm are introduced. The results indicate that the bank number 56 is the superior bank. Among the proposed techniques, the novel recommended CVS compared with CCR-BCC and SFA models, has a more positive correlation with profit risk, and show a higher coefficient of determination values. Sequential Minimal Optimization(SMO) algorithm receives the highest accuracy in all four suggested filtering layers.

Our main goal is here to make a comparative analysis between the well-known MOND theory and a more recent model called κ-model. An additional connection, between the κ-model and two other novel MOND-type theories: Newtonian Fractional-Dimension Gravity (NFDG) and Refracted Gravity (RG), is likewise presented. All these models are built to overtake the DM paradigm, or at least to strongly reduce the dark matter content. Whereas they rely on different formalisms, however, all four seem to suggest that the universal parameter, a0, appearing in MOND theory could intrinsically be correlated to either the sole baryonic mean mass density (RG and κ-model) and/or to the dimension of the object under consideration (NFDG and κ-model). We could then confer to the parameter a0 a more flexible status of multiscale parameter, as required to explain the dynamics together in galaxies and in galaxy clusters. Eventually, the conformal gravity theory (CFT) also seems to have some remote link with the κ-model, even though the first one is an extension of general relativity, and the second one is Newtonian in essence. The κ-model has been tested on a small sample of spiral galaxies and in galaxy clusters. Now we test this model on a large sample of galaxies issued from the SPARC database.

The issue of equipment layout in multi-floor satellites consists of two primary parts: allocating the equipment to the satellite's layers and placing the equipment in each layer individually. In reviewing the past literature in this field, firstly, the issue of assigning equipment to layers is observed in a few articles and next in the layout part, the non-overlapping constraint has always been a challenge, particularly for components that do not have a circular cross-section. In addition to presenting a heuristic method for allocating equipment to different layers of the satellite, this article presents a robust flexible programming model (RFPM) for the placement of equipment at different layers, taking into account the inherent flexibility of the equipment in placement and the subject of uncertainty. This model is based on the existing uncertainty between the distances of cuboid equipment which has not been addressed in any of the previous research, and by comparing its outputs with cases from past studies, it demonstrates a significantly higher efficiency in placing the equipment and meeting the limit of non-overlapping constraints between the equipment. Finally, it would be possible to reduce the design time in the conceptual and preparatory stages, as well as the satellite's overall size, while still satisfying other constraints like stability and thermal limitations, moments of inertia and centre of gravity.

Nowadays, frameworks and models are critical to enabling organizations to identify their current sustainability integration into business and to follow up on these initiatives over time. In this context, the maturity models offer a structured way of analyzing how a supply chain meets specific sustainability requirements and which areas demand attention to reach maturity levels. This study proposes a five-level maturity model to help supply chains identify their level of engagement with sustainability practices combining three perspectives: intra and inter-organizational sustainability practices, triple-bottom-line approach and critical areas for sustainability. All the steps followed in constructing the maturity model were based on a literature review, and case studies supported its improvement, application, and testing. The proposed model presents many advantages, such as being used as a self-assessment tool, a roadmap for sustainability behaviour improvement, and a benchmarking tool to evaluate and compare standards and best practices among organizations and supply chains.

There is voluminous literature on Food Security in Africa. This study explicitly considers the spatio-temporal factors in addition to the usual FAO-based metrics in modeling and understanding the dynamics of food security and nutrition across the African continent. To better understand the complex trajectory and burden of food insecurity and nutrition in Africa, it is crucial to consider space-time factors when modeling and interpreting food security. The spatio-temporal anova model was found to be superior(employing statistical criteria) to the other there models from the spatio-temporal interaction domain models. The results of the study suggest that dietary supply adequacy, food stability, and consumption status are positively associated with severe food security, while average food supply and environmental factors have negative effects on Food Security and Nutrition. The findings also indicate that severe food insecurity and malnutrition are spatially and temporally correlated across the African continent. Spatio-temporal modeling and spatial mapping are essential components of a comprehensive practice to reduce the burden of severe food insecurity. likewise, any planning and intervention to improve the average food supply and environment to promote sustainable development should be regional instead of one size fit all.

The paper examines the various uncertainties encountered in high-frequency trading (HFT) environments and delves into the multiple challenges faced by HFT firms in navigating the Dodd-Frank Wall Street Reform and Consumer Protection Act (referred to as the "Dodd-Frank Act"), particularly during the initial stages of its enactment. These challenges include the ambiguity surrounding the definition of HFT, the lack of clarity regarding regulatory requirements and boundaries, inconsistencies in enforcement resulting from deviations in understanding the content, and the absence of detailed descriptions of the Act’s provisions. These hurdles significantly impact not only the daily operations of HFT firms but also pose higher demands on their long-term strategic planning and risk management. Drawing upon the Data, Information, Knowledge, Wisdom, and Purpose (DIKWP) model, this study employs an innovative analytical framework. Through the comprehensive application of conceptual space, cognitive space, and semantic space, it provides a systematic methodology for identifying and analyzing the aforementioned issues. This approach not only aids firms in better comprehending and adhering to complex regulatory requirements but also enables them to explore new business opportunities and competitive advantages while ensuring compliance.

The bilateral trade relationship between PRC and ASEAN is close. As early as 2012, China has been the largest trading partner of ASEAN, and ASEAN has also taken the place of the United States as PRC’s second largest trading partner in 2019.This paper uses the theory of ecological population evolution, selects the total import and export volume of PRC and the ten ASEAN countries from 2000 to 2019 as the data sample, studies the bilateral trade relations between PRC and the ten ASEAN countries, analyzes the competition and symbiotic relationship of bilateral trade between PRC and the ten ASEAN countries and the possibility of trade friction according to the results, and proposes corresponding improvement strategies. According to the results of the population evolution competition model, China has a competitive relationship with Indonesia, Malaysia, the Philippines, Singapore and Thailand, which is most likely to cause trade friction. China has a biased relationship with Brunei, Cambodia, Laos, Myanmar and Vietnam, which is more likely to cause trade friction. On this basis, in order to further strengthen the trade relations between PRC and the ten ASEAN countries, this paper puts forward policy suggestions on improving infrastructure, strengthening independent innovation, seeking cooperation fields and actively investing abroad.

Safety management assessment systems for national level units’ in South Korea focus on responding capacity to cope with impending accident occurrence and danger occurrence. Since the four stage systems for prevention-preparation-response-recovery, which are core elements of national disaster management, assess the capacities by item such as those of individuals, disaster management departments, institutions, and management networks, there is no assessment function for the organic operation states of the entire systems. Therefore, for efficient disaster management, systematic evaluation indices that will enable active pre-checks in departments in organizations should be developed in place of the existing simply checking methods. In this study, an assessment model that will enable active disaster management centered on practice was developed using resilience engineering techniques. This model consists of disaster management items from the viewpoint of proactive responses instead of prevention. A total of 56 items that constitute four capacities; which are prediction (13 items), monitoring (14 items), proactive response (15 items), and safety learning (14 items) capacities were adopted in this model through Delphi analysis. Institutional capacities for infectious disease disaster management were evaluated based on this model and the resultant scores were prediction 4.41, monitoring 4.63, proactive response 4.69, safety learning 4.56 out of the full score of 5.0 points with an overall average of 4.51. This is an excellent capacity management score comparable to the score 4.57 of diagnosis of similar capacities by the WHO\_JEE (The Joint External Evaluation) in 2017. In fact, in 2015, when infectious disease capacity management was poor, in case of MERS (Middle East Respiratory Syndrome) infectious disease spread in South Korea, 36 patients died and 6,729 patients were isolated. However, through capacity reinforcement, in the case of MERS occurrence in South Korea in September 2018, a management capacity that prevented spread was shown as one confirmed case was completely cured in 10 days and 21 contacts were isolated and tested negative. Therefore, this capacity management assessment model is judged to be usable in enhancing disaster response and management capacities.

Ammonium ion is a chemical species that is found in abundance in natural waters, whether underground or surface, but also in wastewater resulting from agricultural and industrial activities. Even if the removal of the ammonium ion from water has been studied for a very long time, it has been found that its removal is far from being solved. In this study, we evaluated the performance of the ammonium ions adsorption process on two adsorbents, zeolite clinoptilolite, ZR, (manufacturer Zeolite Develop-ment SRL, Rupea, Brasov, Romania) and the other granular activated carbon type Norit GAC 830 W. In the first step the paper presents the mineralogical (XRD) and structural (SEM and EDX) characterization of the ZR and determination of the pH zero-point charge, pHZPC, for all the adsorbents. Studies were carried out in equilibrium and kinetic conditions. The efficiency of the adsorbent was investigated in different experimental conditions by varying the initial concentration, particle size, temperature, pH, ionic strength and contact time. The mathematical models and parameters specific to the adsorption isotherms that best describe the experimental results were identified. Langmuir, Freundlich, Temkin and Dubinin-Radushkevich mathematical models were used for comparison. The Langmuir isotherm proved to be the most appropriate to describe the adsorption of ammonium ions on all types of adsorbents used. The adsorption capacity of ammonium ion from synthetic solutions, at 20 °C, pH = 6.09, for the range of initial concentrations 0 - 50 mg/L for Rupea Zeolite is in the range of 10.46 mg/g -12.34 mg/g and for granular activated carbon GAC W830 is 16.64 mg/g. It was found that the increase in temperature and pH have a positive effect on the adsorption capacity of the ammonium ion on the studied adsorbents, and the ionic strength determines the decrease in the adsorption capacity. Kinetic models were also identified that best describe the experimental processes. In this sense, pseudo first order, pseudo second order, intraparticle diffusion and the Elovich model were used. The results of the investigation showed that second-order kinetics governs the adsorption process on ZR zeolites and pseudo-first order for activated carbon.

The high penetration of intermittence resources in the energy market accelerates significantly the decarbonization process but, on the other hand, the electrical system has to face the problem of unbalances. Renewable Energies Sources (RES) are hard to precisely forecast, and power plants are not able to predict the amount of energy that they can provide far from the real time delivery. In this frame, the intraday market gets a fundamental role allowing agents to adjust their position close to the delivery time. In this work we suggest an agent-based model of intraday market combined with genetics algorithms to understand what the best strategy could be adopted by players in order to optimize the market efficiency in terms of welfare and unsold quantity. In the first part we show the effect on the market prices of different scenarios in which players aim at maximizing their revenues and selling/buying all their volumes. In the second part we show the effect of a particular genetic algorithm on the model, focusing on how agents can adapt their strategy to enhance the market efficiency. Comparative analyses are also performed to investigate how the welfare of the system increases as well as the unsold quantity decrease when genetic algorithm is introduced

Climate justice as a commons is conceived as the intertemporal climate equity and equal- ity exchange amongst generations. Sustainability, intended as the interplay amongst the economy, the society, the environment, and the governance, is essential to forge the climate justice theoretical framework. On this base, the study attempts to model intertemporal choice amongst generations in these four domains, making use of an over- lapping generations (OLG) model. The proxies detected are GDP growth (economy), environmental quality (environment), and labor growth, and environmental investment (society) as assumptions. The governance dimension is captured by the di¤erence in wealth between young and old generations. The work aims at replying to the follow- ing research question: Which are the conditions for sustainable development such that climate justice holds? The intra-intergenerational exchange is de…ned in two periods, while the individual provides their preferred economic and environmental choice mix as consumption-saving. This study shows that sustainable growth is achievable only with increased young e¤ort and less leisure and consumption.

Background. A rat model of chronic tympanic membrane perforation was developed to be used in the search of new materials for the sealing of these perforations. Methods. A longitudinal study was carried out in rats subjected to incisional myringotomy followed by the application of mitomycin C alone or with dexamethasone. Rats were checked at days 3, 7, 10, 14 and weekly thereafter until perforation closure, for up to 6 months. Results. The addition of dexamethasone is a key component in order to obtain a chronic opening. Myringotomies treated with saline had a mean healing time of 8.5 days. At 8 weeks, 70.5% of these remained perforated and at 6 months this number fell to 21.4%. Conclusion. This technique is able to maintain more than 70% of tympanic membrane perforations patent for at least 8 weeks. This rat model is adequate for its use in preclinical or translational research.

Design has often been interpreted as a practice of creating novel objects. However, the relationships between objects analysed upstream the process of creation have been under-studied. Here it is presented a model for enhancing the design practice by fostering a deep work on the relationships of mundane objects. The Three-dimensional Narratives (TdN) model comprises a stepwise five phases work package that facilitates a varied range of analyses to improve the creativity and innovation of any project led by any type of participants. One particular feature of the TdN model is the appropriation of concepts coming from non-design fields such physics and biology to both developing the work of the model and to improve the comprehension and outcomes of the enrolled participants. During three Case Studies with children, youngsters, and older participants the TdN model was validated, and its usability was successfully assessed. The TdN model shows that there is a need for a deeper design practice and that it is relevant to improve the lexicon of designers in order to facilitate a broader and design practice, irrespectively of the aim of the proposed project and nuances of the audience.

This work presents a Fault-Tolerant Model Predictive Control (FTMPC) algorithm applied to a simulation model for sewer networks. The control system will aim to prevent contaminated water from escaping the network, especially during periods of heavy rainfall, that can cause combined sewer overflows (CSO), while maintaining the flow of water towards the wastewater treatment plant (WWTP) as close as possible to its nominal value. The main purpose of the work is to preserve the operation of the predictive controller as much as possible, in accordance with its operational objectives, when there may be anomalies affecting the elements of the control system, mainly sensors and actuators. Comparing the results obtained considering various types of faults, with situations of normal controlled operation and with the behavior of the sewer network when no control is applied, will allow some conclusions to be drawn at the end.

This article aims at presenting the results that were found in the design and implementation of a new management model of Critical Success Factors for improving the effects of research projects. The model was based on the theory of structural equations derived from factor analyses and multiple linear regression models. For achieving the purpose, the authors developed an empirical evidence analysis founded on a literature review in the knowledge area of project management. Afterwards, the process of identification of the CSFs was carried out for a group of research projects launched in Colombia as a result of the application and measurement of an instrument. They were the basis for the development of a structural relationship modeling. Also, this contributed to determine the CSFs that explain the generation of effects of research projects, and the project management execution process from which it can be carried out based on said measurement indicators.

Dams design and their operation cause strong environmental alteration and therefore a long-term debate is ongoing for the scale of these projects. At the same time, the concept of Environmental Flow Assessment (EFA) is a crucial element of modified ecosystems featuring large infrastructure such as dams and reservoirs for mitigating potential environmental degradation while they operate. Nowadays, integrated scientific frameworks are required to quantify the risks caused by large infrastructure. Through the use of stochastic analysis, it is possible to quantify these uncertainties, and present a solution that incorporates long-term persistence and environmental sustainability into a balanced reservoir simulation model. In this work, an attempt is made to determine a benchmark reservoir size incorporating hydrological and ecological criteria though stochastic analysis. The primary goal is to ensure the best possible conditions for the ecosystem, and then secondarily to allow a steady supply of water for other uses. Using a synthetic timeseries based on historical inputs, it is possible to determine and preserve essential statistical characteristics of a river’s streamflow, and use these to detect the optimal reservoir capacity that maximizes environmental and local water demand reliability.

Purpose: Localization and mapping with LiDAR data is a fundamental building block for autonomous vehicles. Though LiDAR point clouds can often encode the scene depth more accurate and steadier compared with visual information, laser-based Simultaneous Localization And Mapping (SLAM) remains challengeable as the data is usually sparse, density variable and less discriminative. The purpose of this paper is to propose an accurate and reliable laser-based SLAM solution. Design/methodology/approach: The method starts with constructing voxel grids based on the 3D input point cloud. These voxels are then classified into three types to indicate different physical objects according to the spatial distribution of the points contained in each voxel. A global environment model with Partition of Unity (POU) implicit surface is maintained along the process and located voxels are merged into it from stage to stage, through scan-to-model matching implemented by Levenberg-Marquardt method. Findings: We find a laser-based SLAM method. The method uses POU implicit surface representation to build the model and is evaluated on the KITTI odometry benchmark without loop closure. Experimental results indicate that the method achieves accuracy comparable to the state-of-the-art methods. Originality/value: We propose a novel, low-drift SLAM method, which falls into a scan-to-model matching paradigm, operates on point clouds obtained from Velodyne HDL64. The method is of value to researchers developing SLAM systems for autonomous vehicles.

Chipless radio frequency identification (RFID) technology is expected to replace barcode technology due to its ability to read in non-line-of-sight (NLOS) situations, long reading range, and low cost. Currently, there is extensive research being conducted on frequency-coded (FC) co-polarized radar cross-section (RCS)-based tags, which are widely used. However, detecting co-polarized chipless RFID tags in cluttered environments is still a challenge, as confirmed by measuring two co-polarized tags in front of a perfect metal reflector (30.5cm×22.5cm). To address this challenge, a realistic mathematical model for a chipless RFID system has been developed that takes into account the characteristics of the reader and the tag, as well as reflections from cluttered objects. This model has been simulated and verified with measurement results by placing a single flat metal reflector behind two co-polarized one-bit designs: a dipole array tag and a square patch tag. The results showed that the interfering signal completely overlaps the ID of the co-polarized tag, severely limiting its detectability. To solve this issue, the proposed solution involves reading the tag in cross-polarization mode by etching a diagonal slot in the square patch tag. This proposed tag provides high immunity to the environment and can be detected in front of both dielectric and metallic objects.

In his Cynefin classification of system behaviours, Snowden (2007), posits that his Simple (Clear ) and even Complicated system categories are sufficiently understandable to be amenable to the traditional methods of system analysis and modelling. Here, relationships between entities in the system are clear and unambiguous and they behave predictably. So, we can build mathematical “models” to describe how the system is expected to function in different situations. Leaving aside his fourth category, Chaotic, as too hard for the moment, this paper focusses on the third category, Complex systems. Yaneer Bar-Yam [1998] defined "complex systems" as systems that "have multiple interacting components, whose collective behaviour cannot be simply inferred from the behaviour of components." So, the traditional system modelling approach of decomposition into components and attempting to build up a picture of system performance from individual pieces, alone, is no longer appropriate for this class. The problem is that most of the methods we currently employ, and particularly the methods that attempt to make the case that these systems are safe, (such as Fault trees, FMEA. and Root Cause Analysis), rely on this decomposition into components and attempt to make the parts more reliable individually. Even the more systemic approaches, such as Reason’s (1990) Swiss Cheese Model, and Leveson’s System Theoretic Analysis (STPA) (2004), encourage adding layers of protection, barriers, strengthened control loops and better safety critical systems, in the hope that they are making the systems safer. But without a valid model to test the effectiveness of these add-ons, we cannot be sure that they will not have an opposite effect, of making the systems even more complex, unreliable and unpredictable. For complex systems, the careful gathering and documentation of system components and their relationships is still a necessary first step, but we need an additional capacity to model these complex systems to test out and prove they work safely and successfully in the real world. (not just draw fixed component relationships as system “models” (wiring diagrams)) In the last 10 years, an original approach developed by Hollnagel, (2012), to model systems as sets of interactive, interdependent “functions”, (abstracted from and independent of component details), has now been developed to the point where it can take the basic data and structures from the current component focussed system engineering “models”, such as MBSE( Goldberg (1994)), and can pull it all together in a dynamic system model from which analysts can discern how it really works in practice, and predict the emergent behaviours characteristic of complex systems. The paper describes how this methodology developed and how it is currently used to model real situations, to analyse incidents and anticipate events.

This study delves into the impact of artificial intelligence on students’ learning.The paper pioneers the use of kmeans classification to reduce the dimensionality of features before the classification process, which minimizes redundant information and computational overhead. This step is not commonly found in prior research.Firstly, a random forest model is established with “whether AI assistance was used to complete the paper” as the output, and various features as inputs. The analysis of the predictive accuracy when changing input features reveals the degree of influence of each feature on using AI to complete the paper. After feature selection, the remaining 6 features can still effectively predict the use of AI to complete the paper, indicating the representativeness of the extracted indicators. Subsequently, the PCA-K-means algorithm is employed to classify the use of artificial intelligence. PCA algorithm is used for dimensionality reduction of the extracted features to better characterize students’ use of AI. Three representative variables are selected, and the contribution of each feature is computed based on the factor loading matrix. Finally, the K-means algorithm is used to classify students based on the three dimensional features, showing that students can be effectively classified into 2 categories. The results indicate that the majority of students support the use of AI technology to enhance their abilities, although some students may only intend to use AI to cope with exams and similar tasks.

With data for SARS-CoV-2 and with many countries entering the second wave of contagion required the improvement of the forecasting model, structuring its model to forecast the peak of the first and second contagion wave in Brazil. The Model Estimation for SARS-CoV-2 Peak Contagion (MESPC) was structured, capable of estimating the peak of contagion for SARS-CoV-2 in the first and second waves, as the main objective of this work. Using the MESPC model, it was possible to estimate, with a certain reliability degree, the peak of contagion for the first and second waves in Brazil, with one day difference from the real to the forecast. It is possible to use MESPC to forecast the peak of contagion for several regions, provided that the necessary structure and calibration are respected.

The outdoor field test of the 4-terminal on Si tandem photovoltaic module (specifically, InGaP/GaAs on Si) was investigated and performance model, considering spectrum change affected by fluctuation of atmospheric parameters, was developed and validated. The 4-terminal on Si tandem photovoltaic module had about 40 % advantage in seasonal performance loss compared with standard InGaP/GaAs/InGaAs 2-terminal tandem photovoltaic module. This advantage is expanded in (subarctic zone) < (temperate zone) < (subtropical zone). The developed and validated model used all-climate spectrum model and considered fluctuation of atmospheric parameters, and can be applied every type of on-Si tandem solar cells.

Technology has transformed aeroponics, providing numerous advantages over traditional soil-based agriculture. However, there remains a need for comprehensive information on the types of technology employed in aeroponics and their impact on the growing process. This paper presents a literature review of 47 studies published between 2012 and 2023 in peer-reviewed journals and conference proceedings. As a result, it identifies the status and tendencies in the usage of technology in aeroponics as well as the main opportunities and challenges. Furthermore, this paper introduces the Technology Adoption and Integration in Sustainable Agriculture (TAISA) model. TAISA is a model that identifies the degree of technology integration in any sustainable agriculture system to determine how technology affects production and quality. Overall, the systematic review suggests that technology can play a vital role in improving the efficiency and sustainability of aeroponic farming. However, careful consideration must be given to the costs and technical requirements associated with using these technologies. Moreover, the TAISA model reveals that technology has primarily been employed in creating new processes that are not possible to implement without the help of technology. Therefore, we conclude that technology use has taken root in aeroponics and can be promoted to improve sustainable agriculture.

With global warming, arable land in boreal regions is tending to expand into high latitude regions in the northern hemisphere. This entails certain risks; such that inappropriate management could result in previously stable carbon sinks becoming sources. Agroecological models are an important tool for assessing the sustainability of long-term management, yet applications of such models in boreal zones are scarce. We collated eddy-covariance, soil climate and biomass data to evaluate the simulation of GHG emissions from grassland in eastern Finland using the process-based model DNDC. We simulated gross primary production (GPP), net ecosystem exchange (NEE) and ecosystem respiration (Reco) with fair performance. Soil climate, soil temperature and soil moisture at 5 cm were excellent, and soil moisture at 20 cm was good. However, the model overestimated NEE and Reco following crop termination and tillage events. These results indicate that DNDC can satisfactorily simulate GHG fluxes in a boreal grassland setting, but further work is needed, particularly in simulated second biomass cuts, the (>20 cm) soil layers and model response to management transitions between crop types, cultivation, and land use change.

Non-alcoholic fatty liver (NAFLD) is a metabolic disorder related with a chronic lipid accumulation within the hepatocytes. This disease is the most common liver disorder worldwide and it is estimated that is present in up to 25% of the world's population. However, the real prevalence of this disease and the associated disorders is unknown mainly because reliable and applicable diagnostic tools are lacking. It is known that the level of albumin, a pleiotropic protein synthetized by hepatocytes, is correlated with the correct function of the liver. The development of a complementary tool that allow the direct, sensitive, and label-free monitoring of albumin secretion in hepatocyte cell culture can provide insight about the mechanism and drugs action in NAFLD. With this aim, we have developed a simple integrated plasmonic biosensor based on gold nanogratings from periodic nanostructures present in commercial Blu-ray optical disc. This sensor allows the direct and label-free monitoring of albumin in a 2D fatty liver disease model under flow conditions using highly specific polyclonal antibody. This technology avoids both the amplification and blocking steps showing a limit of detection within pM range (≈ 0.39 ng/mL). Thanks to this technology, we identified the optimal fetal bovine serum (FBS) concentration to maximize the lipid accumulation within the cells. Moreover, we discovered that at third day from lipids challenge, the hepatocytes increased the amount of albumin secreted. These data demonstrate the ability of hepatocytes to respond to the lipid stimulation releasing more albumin. Further investigation needed to unveil the biological significance of that cell behaviour.

Arc sensors have been used in seam tracking and widely studied since the 80s; commercial arc sensing products for T and V shaped grooves have been developed. However, it is difficult to use these arc sensors in narrow gap welding because arc stability and sensing accuracy are not satisfactory. Pulse gas melting arc welding (P-GMAW) has been successfully applied in narrow gap welding and all position welding processes, so it is worthwhile to research P-GMAW arc sensing technology. In this paper, we derived a linear mathematical P-GMAW model for arc sensing, and the assumptions for the model are verified through experiments and finite element methods. Finally, the linear characteristics of the mathematical model were investigated. In torch height changing experiments, uphill experiments, and groove angle changing experiments the P-GMAW arc signals all satisfied the linear rules. In addition, the faster the welding speed, the higher the arc signal sensitivities; the smaller the groove angle, the greater the arc sensitivities. The arc signal variation rate needs to be modified according to the welding power, groove angles, and swing or rotate speed.

Infectious illnesses have always posed a threat to human health, with tuberculosis being a major concern. The use of various medications and antibiotics in the fight against such TB has led to the emergence of drug-resistant tuberculosis, which has become increasingly difficult to manage. While there have been a few studies and proposed conceptual models on how to manage and prevent various drug-resistant TB mutations and lineages, a model aimed at limiting and con-trolling such mutations in rural areas burdened with tuberculosis is lacking. This study seeks to map a model that is to be used to bridge the gap by facilitating the exchange of knowledge among healthcare professionals in healthcare facilities, diagnostic laboratories, and research institutes, particularly for underprivileged communities in the Eastern Cape. The model will also serve as a guide to monitor and evaluate epidemiological TB management plans.

Background: Nursing services provided by nurses are based on knowledge and competence in the field of nursing science developed in accordance with Client needs, scientific developments, and the demands of globalization. These health services include nursing services that are carried out responsibly, accountably, with quality, and safely by nurses who have obtained registration and permission to practice. Nursepreneur is innovation and courage to take risks and is ready to work hard to achieve goals with optimism. Which has important components namely: 1) quality, 2) role, 3) option and success. The post-pandemic new world, especially in the health care system, continues to grapple with the demands of costs to provide patient care and safety. By using the application of the nursing theory model. Purpose :. Assessing scientific studies on the application of evidence-based intervention in wound care using nursing theory, identifying the important role of telenursing in improving nursing services in Nerspreneurship, Method: literature study Conclusion: Telenursing in nursing focuses on providing nursing care through information technology, such as telephone, computers, and the Internet that can be used to improve treatment outcomes among older people, especially those with low literacy skills and low financial status (Esmaeilpour-BandBoni et al., 2020). The statement from the results of the study refutes that Telenursing is intended for patients who have higher education and middle and upper economic states.

Event detection provides a crucial foundation for intelligent text analysis and supports numerous downstream applications. However, existing detection models often fail to meet the high accuracy requirements and typically require a human–machine collaborative detection mode involving “machine detection followed by manual audit and correction.” Analysis reveals that the recall rate of machine detection is a major factor limiting the efficiency of human–machine collaboration. To address this at its root and ensure high recall, an event trigger recommendation task is introduced, and a span-based recommendation model for Chinese, SpETR (Span-based Event Trigger Recommender), is developed. This model integrates confidence information from both trigger identification and event classification stages to recommend candidate triggers and their event types for each event. To enhance recall, a semantic boundary smoothing method is proposed, which assigns soft labels to spans around gold triggers based on semantic completeness and part-of-speech, combined with a modified focal loss function to make the model predictions smoother. Experiments on DuEE and a self-built dataset show that SpETR is most effective when the number of recommendations is set to 3, achieving recall rates of 97.76% and 98.70%, respectively, comprising improvements of 4.30% and 5.22% over the optimal baseline models. In terms of human–machine collaborative detection, SpETR saved 30.6% and 25.8% of time compared to traditional detection models on two datasets, and the average F1 score of the annotation results was also improved by 5.35% and 3.48%, respectively.

This paper describes the load capacity of short fiber-reinforced polymer lugs with Ti-6Al-4V selective laser-melted bushings with the original embedded element surface roughness and after sandblasting and vibratory finishing. Lugs are an important part of pin-joints. Adhesion between PA6 and SLM produced titanium is not fully studied. The cohesive zone material Mode II model parameters were calibrated experimentally by extruding a cylindrical bushing along the lug axis. The values of the maximum equivalent tangential contact stress were fitted for cases with investigated embed element roughness. The critical fracture energy for tangential slip was also estimated. Validation of the constructed CZM Mode II models with the results of strength experiments was performed. In both the experiment and the calculation, greater bushing roughness provides greater lug load-bearing capacity. The presented models can be used for the preliminary evaluation of SFRP PA6 parts with titanium embedded elements bearing capacity.

A dioxomolybdenum catalyst [(MoO2Cl2-O-MoO2Cl2)(L)] (1) (with L (1S,2S)-N,N´-bis(2-pyridinecarboxamide)-1,2-cyclohexane) was prepared and used as catalyst for the desulfurization of a multicomponent model fuel containing the most refractory sulfur compounds in real fuels. This complex showed to have a high efficiency to oxidize the aromatic benzothiophene derivative compounds present in fuels, mainly using a biphasic 1:1 model fuel/MeOH system. This process conciliates catalytic oxidative and extractive desulfurization, occurring the oxidation of the sulfur compounds in the polar organic solvent. The oxidative catalytic performance of (1) showed to be influenced by the presence of water in the system. Using 50% aq. H2O2 it was possible to reuse the catalyst and the extraction solvent MeOH during ten consecutive cycles without loss of desulfurization efficiency.

Coupled Delft3D-object model has been developed to predict object’s mobility and burial on sandy seafloor. The Delft3D model is used to predict seabed environment such as currents, waves (peak period, significant wave height, wave direction), water level, sediment transport, and seabed change, which are taken as the forcing term to the object model consisting of three components: (a) object‘s physical parameters such as diameter, length, mass, and rolling moment, (b) dynamics of rolling cylinder around its major axis, and (c) empirical sediment scour model with re-exposure parameterization. The model is compared with the observational data collected from a field experiment from 21 April to 23 May 2013 off the coast of Panama City, Florida funded by the Department of Defense Strategic Environmental Research and Development Program. The experimental data contain both objects’ mobility using sector scanning and pencil beam sonars and simultaneous environmental time series data of the boundary layer hydrodynamics and sediment transport conditions. Comparison between modeled and observed data clearly show the model capability.

The paper presents an error model of a measurement chain containing link performing discrete wavelet transform algorithm which is most often the last stage of measurement signal processing. The goal is to determine the uncertainty budget of the input quantities of the wavelet transform algorithm. The error model takes into account parts of analog, analog-to-digital and digital processing, describing the properties of subsequent fragments of the chain using their transmittance and processing functions. The proposed model enables the description of both deterministic and non-deterministic properties of signal errors. The proposed model was validated using an example measurement chain created for this purpose.

This paper presents a finite element analysis of the bi-directional orthogonal model, which incorporates individual crack strain separation and tracking. The objective of the research is to expand the current shear friction model to manage bi-directional cracking at any angle, allowing for a more universal model that can be applied to intricate structures and non-proportional loading cases. The proposed model was initially developed as a total strain-based model, with the assumption that crack strains are equivalent to total strains, but was subsequently recalculated to improve accuracy by separating crack strains from total strains. Furthermore, a separate crack strain formulation was created to account for strains in the concrete's uncracked portions and locked-in crack strains. The article then discusses the testing of various convergence methods and loading programs to achieve high convergence. Comparative analyses of the generalized shear friction model with other models for crack orientation and loading cases similar to those of a reinforced concrete membrane are also presented. The MATLAB program successfully applied the bi-directional cracking model for one finite element under a uniform cyclical strain state, using a secant stiffness formulation.

he Grassmann variables are used to formally transform a system with constraints into an unconstraint system. As a result, the Schr\"{o}dinger equation arises instead of the Wheeler-DeWitt one. The Schrodinger equation describes a system's evolution, but a definition of the scalar product is needed to calculate the mean values of the operators. We suggest an explicit formula for the scalar product related to the Klein-Gordon scalar product. The calculation of the mean values is compared with an etalon method, in which a redundant degree of freedom is excluded. Nevertheless, we could note that a complete correspondence with the etalon picture is not found. Apparently, the picture with the Grassmann variables requires a further understanding of the underlying Hilbert space.

Based on orbital angular momentum (OAM) properties of Laguerre Gaussian beams LG(p,ℓ), a robust optical encoding model for efficient data transmission applications is designed. This paper presents an optical encoding model based on intensity profile generated by a coherent superposition of two OAM-carrying Laguerre-Gaussian modes and Machine-learning detection method. In the encoding process, the intensity profile for data encoding is generated based on selection of p and ℓ indices, while the decoding process is performed using support vector machine (SVM) algorithm. Two different decoding models based on SVM algorithm are tested to verify the robustness of optical encoding model, finding a BER =10−9 for 10.2dB of signal-to-noise ratio in one of the SVM models.

Virtual human body models contribute to designing safe and user-friendly products through virtual prototyping. Anthropometric biomechanical models address different physiques using average dimensions. In designing personal protective equipment, biomechanical models with the correct geometry and shape shall play a role. The presented study shows the variations of subject-specific anthropometric dimensions from the average for the different population groups in the Czech Republic and China as a background for the need for personalized human body models. The study measures a set of clothing industry dimensions of Czech children, Czech teens, Czech adults and Chinese adults and compares them to the corresponding age average, which is represented by a scaled anthropometric human body model. The cumulative variation of clothing industry dimensions increases the farer is the population group from the average. It is smallest for the Czech adults 7.54% ± 6.63%, Czech teens report 7.93% ± 6.25% and Czech children differ 9.52% ± 6.08%. Chinese adults report 10.86% ± 11.11%. As the variations of the particular clothing industry dimensions from the average prove the necessity of having personalized subject-specific models, the personalization of particular body segments using the measured clothing industry dimensions leading to a subject-specific virtual model is addressed. The developed personalization algorithm results in the continuous body surface desired for contact applications for assessing body behavior and injury risk under impact loading.

In this work a modified version of the well-known Simple Water Balance (SWB) model, comprising here three parameters instead of one, was used. Although simple, the model was tested in large-scale river basins in east-central Greece, upstream two hydrometric stations. The available historic runoff records comprised 19 hydrologic years each, on a monthly basis. Thirteen among them were used for calibrating the model, whereas the six subsequent, for validating it. Two different efficiency criteria were used as a measure of performance of the modified model. Their values, calculated for both calibration and validation stages, were close and relatively high. Thus, keeping in mind both the size and complexity of the river basins studied, one can conclude that the modified model, despite its simplistic concept and lumped form, fits satisfactorily the historic runoff series.

Current neural network models can demonstrate reasonable-looking behavior, considered by some developers and researchers human-like. For example, a large language model GPT-3 is susceptible to human-like cognitive biases. Yet there is no data of such models solving emotional intelligence (EI) tasks. They are connected to the abilities that has been previously considered as specifically human EI is an important aspect of human communication. The ability to understand and respond to emotional cues is essential for effective communication. Therefore, it is crucial to determine the ways AI models such as ChatGPT demonstrate EI. The present research aims to measure the EI of GPT-4, a large language model trained by OpenAI. Russian version of the Mayer–Salovey–Caruzo Emotional Intelligence Test sections B, C, D, F, G and H were used in this research. High points were obtained in Understanding emotions scale and Strategic EI. Mean points are obtained in Managing emotions scale. Low and less reliable values are obtained in Using emotions to facilitate thought scale. Thus, GPT-4 seems already capable of identifying emotions in text and describing techniques for managing them. However, complex cases and irregular situations requiring emotions qualitative analysis would be a hard task for GPT-4.

A new approach is presented for dynamic modeling of chemical and isotopic evolution of C1-3 during the hydrocarbon generation process. Based on systematic data obtained from published papers for pyrolysis of various hydrocarbon sources(type I kerogen/source rock, type II kerogen/source rock, type III kerogen/source rock, crude oil, asphalt, etc), the empirical evolution framework of chemical and isotopic composition of C1-3 during the hydrocarbon generation process was built. Although the empirical framework was built only by fitting large amount of pyrolysis data, the chemical and isotopic composition of C1-3 derived from the pyrolysis experiments all follow the evolution laws, convincing us that it is applicable to the thermal evolution process of various hydrocarbon sources. Based on the simplified formula of the isotopic composition of mixed natural gas at different maturities (δ13Cmixed) δ13Cmixed=(X〖*n〗_iA 〖*δ〗^13 C_iA+Y〖*n〗_iB 〖*δ〗^13 C_iB)/(X〖*n〗_iA+Y〖*n〗_iB ), it can be derived that the cumulative isotopic composition of alkane generated in certain maturity interval can be expressed by the integral of the product of instantaneous isotopic composition and instantaneous yield at certain maturity point, and then divided by the cumulative yield of alkane generated in corresponding maturity interval. Thus, the cumulative isotopic composition(A(X)), cumulative yield(B(X)), instantaneous isotope(C(X)),and instantaneous yield(D(x)) in the dynamic model comply with the following formula during the maturity interval of (X0-X) A(X)=(∫_(X_0)^X▒〖C(X)*D(X)dx〗)/(B(X)), where A(X) and B(X) can be obtained by fitting of pyrolysis data, and D(x) can also be obtained from the derivation of B(X). The dynamic model was applied on the pyrolysis data of Pingliang Shale to illustrate the quantitative evolution of cumulative yield ,instantaneous yield, cumulative isotope and instantaneous isotope of C1-3 with increasing maturity.The dynamic model can quantify the yield of methane, ethane and propane as well as δ13C1, δ13C2 and δ13C3 respectively during the hydrocarbon generation process, which is of great significance to evaluate the natural gas resources of hydrocarbon source rock with different maturity and to identify the origin and evolutionary process of hydrocarbons by chemical and isotopic data. Moreover, this model provides an approach to study the dynamic evolution of isotope series of C1-3 (including reversed isotopic series), which is hopeful to reveal the mechanism responsible for isotopic reversal when combined with post-generation studies.

As development progresses, when the bottom hole flowing pressure or formation pressure is less than the saturation pressure of crude oil in the reservoir, oil and gas two-phase seepage occurs in the reservoir. Due to the characteristics of oil and gas two-phase seepage, after the oil and gas two-phase seepage occurs in the reservoir, the well production will be reduced, or even greatly reduced. Therefore, how to predict the horizontal well capacity better in this case is an important problem that needs to be solved urgently. In this paper, the method and process of establishing the transient calculation model of two-phase flow in horizontal wells are introduced in detail from three aspects: fluid physical properties, reservoir oil-gas two-phase seepage, and the coupling model of Inflow Performance and Flow in Wellbore. The model is more reliable through the verification of production data from five wells in two oilfields.

In this paper, based on the cumulated damage generated by the cyclical application of the testing vibration profile, a methodology to determine the reliability index of the analyzed component is given. In the analysis, the testing time, component geometry, applied weight, and material resonant frequency are all of them considered by using a dynamic, and amplitude factor. Then, from the generated vibration response data of the analysis, the corresponding bending stress is determined for each one of the rows of the testing profile. And by the cyclical application of the whole testing profile, the corresponding damage is cumulated to each profile cycle until the cumulated damage is D=1. Finally, the reliability that each one of the cumulated blocks (cyclical profile application) is determined by considering, the random vibration is a stress variable. Thus, we use the cumulative damage model with the inverse power law stress/life relationship to determine the two parameter Weibull distribution used to estimate the reliability index of each cumulated block. As a numerical application, we analyze a cantilever aluminum beam Al 6061-T6.

The control of the fine particle emission from the coal-fired power plants has been a big challenge in china. Either the conventional electrostatic precipitator or the fabric filter has some shortages. The electrostatic precipitator is hard to keep high efficiency for the submicron particles. The fabric filter could keep high efficiency but with very high pressure drop. One solution is to combine them together. Several types of hybrid particle collectors (HPC) combining the electrostatic precipitator and the fabric filter together have been developed and applied in a number of projects in China. In recent years, numerical simulation technology has been widely used in the design of the collectors. In this paper, an unsteady numerical model is used to investigate the particle deposition characteristics in a scale hybrid collector. The fluid field is modeled by using incompressible Navier-Stokes equations with the RNG turbulence equations. The corona discharge is solved by using a finite volume method. The particle charging is modeled by using a filed-diffusing combined model. And an unsteady cake formation model is used to simulate the filtration process.

Predicting ground reaction forces (GRFs) and ground reaction moments (GRMs) through a biomechanical model-based approach offers advantages for biomechanical analysis, particularly in situations where the application of a statistical model is limited by insufficient training data. However, the current prediction method is unsuitable for clinical applications due to its long computational time. The present study developed a new optical motion capture (OMC)-based method to predict GRFs, GRMs, and joint torques. The proposed approach performed the estimation process by distributing external forces, as determined by the equation of motion, between the left and right feet based on foot deformations, thereby predicting the GRFs and GRMs without relying on machine learning or optimization techniques. We investigated the prediction accuracy during walking by comparing a conventional analysis using a force plate with the OMC results. The comparison revealed excellent or strong correlations between the prediction and measurement for all GRFs, GRMs, and lower limb joint torques. The proposed method, which provides practical estimation with low computational cost, facilitates efficient biomechanical analysis and rapid feedback of analysis results, thereby increasing its applicability for kinetics estimation in clinical settings.

Cell mechanics is a biophysical indicator of cell state, such as cancer metastasis, leukocyte activation, and cell cycle progression. Atomic force microscopy (AFM) is a widely used technique to measure cell mechanics, where the Young modulus of a cell is usually derived from the Hertz contact model. However, the Hertz model assumes that the cell is an elastic, isotropic, and homogeneous material and that the indentation is small compared to the cell size. These assumptions neglect the effects of the cytoskeleton, cell size and shape, and cell environment on cell deformation. In this study, we investigated the influence of cell size on the estimated Young’s modulus using liposomes as cell models. Liposomes were prepared with different sizes and filled with phosphate buffered saline (PBS) or hyaluronic acid (HA) to mimic the cytoplasm. AFM was used to obtain the force indentation curves and fit them to the Hertz model. We found that the larger the liposome, the lower the estimated Young’s modulus for both PBS-filled and HA-filled liposomes. This suggests that the Young modulus obtained from the Hertz model is not only a property of the cell material, but also depends on the cell dimensions. Therefore, when comparing or interpreting cell mechanics using the Hertz model, it is essential to account for cell size.