The emergence of resistance to first-line antimalarial drugs calls for development of new therapies for drug-resistant malaria. The efficacy of quinoline-based antimalarial drugs has prompted the development of novel quinolines. A panel of 4-aminoquinoline hydrazone analogues were tested on Plasmodium falciparum strains: IC50 values after a 48-hour cycle ranged from 0.60 - 49 µM, while the 72-hour cycle ranged from 26-219 nM on the multi-drug resistant K1 strain. Time-course assays were carried out to define the activity of the lead compounds which inhibited over 50 % growth in 24 hours and 90% growth in 72 hours. Cytotoxicity assays with HepG2 cells showed IC50 values of 0.87-11.1 M, whereas in MDBK cells IC50 values ranged from 1.66-11.7 M. High selectivity indices were observed for the lead compounds screened at 72 hours on P. falciparum. Analyses of stage-specificity revealed that the ring stage of the parasite life cycle were most affected. Based on antimalarial efficacy and in vitro safety profiles, lead compound 4-(2-benzylidenehydrazinyl)-6-methoxy-2-methylquinoline 2 was progressed to drug combination studies for the detection of synergism, with a combinatory index of 0.599 at IC90 for the combination of with artemether, indicating a synergistic antimalarial activity. Compound 2 was screened on different strains of P. falciparum (3D7, Dd2) which maintained similar activity to K1, suggesting no cross-resistance between multi-drug resistance and sensitive parasite strains. In vivo analysis with 2 showed suppression of parasitaemia with P. yoelii NL treated mice (20 mg/kg and 5 mg/kg).

A novel synthetic strategy is disclosed to prepare a new class of metalorganic copolymers which contain iron(II) clathrochelate building blocks by employing a mild and cost-effective copper-catalyzed [4 + 2] cyclobenzannulation reaction, using three specially designed diethynyl iron(II) clathrochelate synthons. The target copolymers CBP1-3 were isolated in high purity and excellent yields as proven by their structural and photophysical characterization, namely, Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS) and UV-vis absorption and emission spectroscopies. Thermogravimetric analysis (TGA) of CBP1-3 reveals excellent chemical stability. Investigation of the adsorption properties of the target copolymers towards the carcinogenic methyl red dye from aqueous solution reveals a quantitative uptake in 30 minutes. Isothermal adsorption studies disclose that methyl red uptake from aqueous solution follows Langmuir model for all the target copolymers reaching a maximum adsorption capacity (qm) of 431 mg g‒1, whereas kinetic investigation reveals that the adsorption follows pseudo first-order with an equilibrium adsorption capacity (qe,cal) of 79.35 mg g‒1 and whose sorption property was sustained even after its reuse several times.

Cytokines secreted by individual immune cells regulate tissue regeneration and allow communication between various cell types. Cytokines bind to cognate receptors and trigger the healing process. Determining the orchestration of cytokine interactions with their receptors on their cellular targets is essential to fully understand the process of inflammation and tissue regeneration. To this end, we have investigated the interactions of Interleukin-4 cytokine (IL-4)/Interleukin-4 cytokine receptor (IL-4R) and Interleukin-10 cytokine (IL-10)/Interleukin-10 cytokine receptor (IL-10R) using in situ Proximity Ligation Assays in a regenerative model of skin, muscle and lung tissues in the mini-pig. The pattern of protein-protein interactions was distinct for the two cytokines. IL-4 bound predominantly to receptors on macrophages and endothelial cells around the blood vessels while the target cells of IL-10 were mainly receptors on muscle cells. Our results show that in situ studies of cytokine-receptor interactions can provide unravel the fine details of the mechanism of action of cytokines.

This manuscript provides a new integrated view of the development of allergen-specific TH2 and the lack of their associated Treg cells in a unified model, justifying the need for IL-2 to correct allergy conditions.

There is an urgent need to better understand the mechanisms involved in scar formation in brain. It is well known that astrocytes are critically engaged in this process. Here we analyze in-cipient scar formation one week after a discrete ischemic insult to the cerebral cortex. We show that the infarct border zone is characterized by pronounced changes in the organization and subcellular localization of the major astrocytic protein AQP4. Specifically there is a loss of AQP4 from astrocytic endfoot membranes that anchor astrocytes to pericapillary basal laminae and a disassembly of the supramolecular AQP4 complexes that normally abound in these membranes. This disassembly may be mechanistically coupled to a downregulation of the newly discovered AQP4 isoform AQP4ex. AQP4 has adhesive properties and is assumed to facilitate astrocyte mo-bility by permitting rapid volume changes at the leading edges of migrating astrocytes. Thus, the present findings provide new insight in the molecular basis of incipient scar formation.

Bacterial infections are world-wide problem and resistant bacteria is increasing globally that lead to treatments failure. Thus, it is important to find new techniques that are effective for the treatment antibiotic-resistant microorganisms. Green medicine used for the medication of different bacterial infection. Therefore , the study aimed to evaluate the immunomodulatory activity of essential fatty acid semi carbazide (EFASC) compounds extracted from flaxseed to eradicate resistance pathogens . Crud extracts of Linum usitatissimum was extracted by hexane for extraction of EFASC. The results of LD₅₀ appear that a live suspension of E.coli was 0.49×10⁷ ,while HK E.coli was 10⁸ , 125 mg /ml were the optimum dose in stimulate immune response of EFASC which gave maximum dose of total WBC , Neutrophil and Monocyte count. The immunomodulatory activity appear that E.coli + EFASC released moderate levels of IL-4 . HK E.coli release higher IL-4 lead to increase the hypersensitivity and hyper responses of immune system. HK + EFASC immunogen revealed moderate increased in IL-12 mean level 0.99 pg /ml, HK bacteria recorded 1.49 pg/ml, while the mean of EFASC revealed no significant different compare with control. An effective protection was observed in immunized groups with HK E.coli and EFASC challenged with 100 of LD50 of a live E.coli.

To cope the high glycemic variability (GV) is crucial in the management of multiple daily insulin (MDI) in diabetes. We compared the effect of low dose metformin 750mg/d adding vildagliptin 100mg/d (DPP4+LMET) or the high dose metformin 1500mg/d (HMET), in type 2 diabetes (T2D) with MDI, evaluating GV by continuous glucose monitoring (CGM). Single center, open-label, 12 weeks - 2 period crossover design. Twenty T2D with inadequately controlled (7.0% <HbA1c ≦9.0%) with MDI + LMET were enrolled. Primary endpoints were GV and hypoglycemia derived from CGM performed after each 12 weeks treatment periods. There was no significant difference in HbA1c, body weight changes, total daily dose of insulin. DPP4+LMET compared to the HMET, significantly reduced the calculated GV value, mean (7.15±1.3 vs 7.82±1.6, p<0.05), standard deviation (1.78±0.55 vs 2.27±1.11, p=0.03), continuous overlapping net glycemic action (6.44±1.28 vs 7.12±1.69, p<0.05), J-Index (26.7±11.0 vs 34.9±19.8, p<0.05), high blood glucose index (3.01±1.96 vs. 6.73±4.85, p=0.02), and mean amplitude of glycemic excursions (4.53±1.35 vs 5.50±2.34, p=0.03). The GV metrics with hypoglycemia and nocturnal hypoglycemia were not significantly different. DPP4+LMET decreased GV associated with hyperglycemia. Adding DPP4 inhibitor to the lower dose of metformin is an alternative approach to the stable GV in MDI.

Cartilage regeneration requires a balance of anabolic and catabolic processes. This study examined the susceptibility of fibromodulin (FMOD) and lumican (LUM) to degradation by MMP-13, ADAMTS-4 and ADAMTS-5, the three major degradative proteinases in articular cartilage in osteoarthritis (OA). Immunolocalisation of FMOD and LUM in foot sections of developmental cartilages demonstrated prominent localisations in metatarsal and phalangeal foetal rudiment cartilages and growth plate. An MMP-13 neoepitope antibody (TsYG11) demonstrated localisation of MMP-13 cleaved FMOD in the hypertrophic chondrocytes of the metatarsal growth plate. FMOD was more prominently localised in the superficial cartilage of normal and fibrillated zones in OA cartilage, TsYG11 positive FMOD was located deeper in the cartilage samples. Ab TsYG11 also identified FMOD fragmentation in Western blots of extracts of normal and fibrillated cartilage and total knee replacement OA cartilage. The C-terminal anti-FMOD used in this study (PR-184) failed to identify FMOD fragmentation due to C terminal processing, an equivalent Ab to the C-terminus of LUM (pAb PR-353) identified 3 prominent LUM fragments in OA human knee cartilages. In-vitro digestion of human knee cartilage with MMP-13, ADAMTS-4 and ADAMTS-5 generated equivalently sized FMOD fragments of 54, 45 and 32kDa to those in blots of OA cartilage, LUM was not less susceptible to fragmention in in-vitro digestions however Ab PR-353 detected N-terminally processed LUM fragments of 39, 38 and 22 kDa in 65-80 year old OA knee cartilage. FMOD and LUM were differentially processed during in-vitro digestions with MMP-13, ADAMTS-4 and ADAMTS-5 with FMOD susceptible to degradation by MMP-13, ADAMTS-4 and to a lesser extent ADAMTS-5 however LUM was less susceptible to fragmentation. FMOD was processed by MMP-13 in metatarsal and phalangeal foetal rudiment developmental cartilages and growth plate indicating a role in skeletogenesis.

Hyperbaric oxygen (HBO) treatment has been proven to attenuate neuroinflammation in rats. This study aimed to determine the potential mechanism underlying the anti-inflammatory effects of HBO treatment on burn-induced neuroinflammation in rats. Thirty-six adult male Sprague–Dawley (SD) rats were randomly assigned to the following six groups (n = 6 per group): (1) sham burn with sham HBO treatment, (2) sham burn with HBO treatment, (3) burn with 1-week sham HBO treatment, (4) burn with 2-week sham HBO treatment, (5) burn with 1-week HBO treatment, and (6) burn with 2-week HBO treatment. SD rats that received third-degree burn injury were used as a full-thickness burn injury model. Subsequently, we analyzed the expression of proteins involved in the galectin-3 (Gal-3)-dependent Toll-like receptor-4 (TLR-4) pathway through enzyme-linked immunosorbent assay (ELISA), immunohistochemistry (IHC) analysis, and Western blotting, and a behavior test was also conducted. The behavior test revealed that HBO treatment significantly suppressed mechanical hypersensitivity in the burn with HBO treatment group compared with the burn with sham HBO treatment group (p < 0.05). ELISA results showed that tumor necrosis factor alpha (TNF-α) and interleukin 1 beta (IL-1β) levels in the dorsal horn of the spinal cord and the skin were significantly decreased in the burn with HBO treatment group compared with the burn with sham HBO treatment group (p < 0.05). Western blotting results demonstrated that HBO treatment significantly reduced the expression of Gal-3 and TLR-4 in the dorsal horn of the spinal cord in the burn with HBO treatment group compared with the burn with sham HBO treatment group (p < 0.05). IHC analysis results showed that the expression of Gal-3, TLR-4, CD68, and CD45 in the dorsal horn of the spinal cord was significantly lower in the burn with HBO treatment group than in the burn with sham HBO treatment group (p < 0.05), and the expression of CD68 and macrophage migration inhibitory factor (MIF) in the right hind paw skin was significantly lower. The expression of vimentin and fibroblast growth factor (FGF) in the right hind paw skin was significantly higher after HBO treatment (p < 0.05). This study proved that early HBO treatment relieves neuropathic pain, inhibits the Gal-3-dependent TLR-4 pathway, and suppresses microglia/macrophage activation in a rat model.

Herein, two title compounds, N-Benzoyl-N’-4-cyanophenyl thiourea (I) and N-(4-nitrobenzoyl)-N’-4-cyanophenyl thiourea (II) were synthesized in high yield, via aroyl isocyanate and 4-aminobenzonitrile. The structure of the prepared compounds was characterized by elementary analysis and FT-IR, ¹H, ¹³C NMR spectroscopic methods. Cyclic voltammetric (CV) experiments were performed with glassy carbon electrode. The reduction potential values of different functional group such as nitro, cyano in title compounds were investigated using CV curves.

Renal cell carcinoma (RCC) is the most common kidney cancer, accounting for approximately 80–90 % of all primary kidney cancer. Treatment for patients with advanced RCC remains unsatisfactory. Rare cancer stem cells (CSCs) are proposed to be responsible for failure of current treatment. Here, we investigate the effects of CBFA2T2 on CSCs regulation in RCC, as well as to elucidate the possible mechanisms. We showed that CBFA2T2 expression can significantly predict the survival of RCC patients. Functional assays showed that knocking-down of CBFA2T2 can inhibit cell migration and invasion in 786-O and A-498 cells in vitro, and reduce ALDH^high CSCs populations. Furthermore, CBFA2T2 expression is necessary for sphere-forming ability and cancer stem cells marker expression in RCC cell lines. Collectively, our data suggest that CBFA2T2 expression correlates with aggressive characteristics of RCC and CBFA2T2 is required for maintenance of “stemness” through regulation of stem cells factors, thereby highlighting CBFA2T2 as a potential therapeutic target for RCC treatment.

The oxidative stress is one of the main cause for cardiovascular diseases (like Hypertension) also one of the results of these diseases. This study involved 56 subjects matched ages and sex divided into two groups; 28 hypertensive subject and 28 healthy subject as control group. The following analysis was done: 4-Hydroxy-2-nonenal(4HNE) and albumin. The results show that there is a significant increase in (4HNE) between patients group and control group. The increase in 4HNE which is a product of lipid peroxidation is attributed to destruction in body cell caused by due to the increase in stress events. It has been concluded that is important nappy on ideal weight, because obesity considered main factors for heart disease and hardening of the arteries. The aim of this study was to investigate the relationship between of some oxidative stress markers and cardiovascular diseases.

Pedestrian Dead Reckoning (PDR) is a promising algorithm for indoor positioning. However, the accuracy of PDR degrades due to the accumulated error, especially in multi-floor buildings. This paper introduces a three-dimensional (3D) positioning method based on terrain feature matching to reduce the influence of accumulated error in multi-floor scene. The proposed method involves two steps: motion pattern recognition and position matching calibration. The motion pattern recognition aims to detect different motion states, i.e., taking the stairs or horizontal walking, from the streaming data. Then, stair entrances and corridor corners are matched with transition points of motion states and pedestrian turning points, respectively. After matching, calibration is performed to eliminate the accumulated errors. By carrying out experiments on a two-floor closed-loop path with a walking distance about 145 m, it is shown that this method can effectively reduce the accumulated error of PDR , achieving accurate 3D positioning . The average error is reduced from 6.60 m to 1.83 m.

As Artificial Intelligence (AI) technology, particularly Machine Learning algorithms, becomes increasingly ubiquitous, our abilities to understand and interpret AI and machine learning algorithms are becoming increasingly desirable. Visualization has been used as a common tool to view and understand complex machine learning processes. In this paper, we will focus on developing a general framework for the visualization of machine learning models as a scalar valued multi-dimensional function to help users understand how the models behave over different viewing spaces. We first give a formal definition of the visualization problem. Interpolation-based morphing and subspace sampling techniques are applied to generate various renderings through projections and cross-sections of the model space as 3D surfaces or heatmap images. This method will be applied to two real-world datasets and applications: the diagnosis of Alzheimer's Disease (AD) using a human brain networks dataset and a real-world benchmark dataset for predicting home credit default risks. The visualizations show that different machine learning algorithms can behave quite differently under different conditions.

Mechanical properties of three-dimensional (3D) printed resin can be improved by decreasing oxygen concentrations during post-curing, and nitrogen saturated post-curing has been applied for the purpose. This study aimed to evaluate and compare the color stability of 3D printed resin crowns post-cured in normal air and nitrogen saturated conditions. Crowns were fabricated with 3D printer and post-cured in normal air (control group; air) or nitrogen saturated condition (experimental group; nitrogen). The specimens in each group were subdivided into four subgroups, each exposed to different discoloration agents: distilled water, coffee, wine, and curry. Post-immersion color changes were measured using a digital spectrophotometer and analyzed through repeated measures ANOVA. Fourier Transform Infrared (FT-IR) spectroscopy evaluated the degree of conversion of resin over immersion times for both post-curing conditions. Comparing the effects of post-curing conditions, significant difference was found between control and experimental groups over immersion time in wine and curry subgroups. In FT-IR analysis, there was significant difference in degree of conversion between the air and nitrogen groups from 10 to 300 seconds. The findings suggest that nitrogen saturated post-curing can potentially enhances the conversion rate of 3D printed resin crowns, thereby improving their color stability.

Liquid argon technology is widely used by many previous and current neutrino experiments, and it is also promising for future large-scale neutrino experiments. When detecting neutrinos using liquid argon, many hadrons are involved, which can also interact with argon nuclei. In order to gain a better understanding of detection processes, and to simulate neutrino events, knowledge of hadron-argon cross sections is needed. This paper describes a new procedure, which improves upon the previous work with a multi-dimensional unfolding, to measure hadron-argon cross sections in a liquid argon time projection chamber. Through a simplified version of simulation, we demonstrate the validity of this procedure.

Prenatal diagnosis of clubfoot traditionally relied on two-dimensional ultrasonography. To enhance diagnosis and predict postnatal outcomes, we examined the parameters that differentiate pathological clubfoot using three-dimensional ultrasonography. In our retrospective study, we examined the findings of prenatal ultrasound and the postnatal outcomes of pregnancies with suspected congenital clubfoot between 2018 and 2021. Based on the three-dimensional perspective, we measured the angles of varus, equinus, calcaneopedal block and forefoot adduction and compared the sonographic variables between the postnatal treated and non-treated groups. We evaluated 31 pregnancies (47 feet) with suspected clubfoot using three-dimensional ultrasonography. After delivery, a total of 37 feet (78.7%) underwent treatment involving serial casting only or additional Achilles tenotomy. The treated group showed significantly greater hindfoot varus deviation (60.5° vs. 46.6°, p=0.026) and calcaneopedal block deviation (65.6° vs. 26.6°, p &lt;0.05) compared to the non-treated group. The calcaneopedal block had an area under the curve of 0.98 with a diagnostic threshold of 46.2 degrees (sensitivity of 97%, specificity of 90%, positive predictive value of 97%, and negative predictive value of 90%). During prenatal evaluation of clubfoot using three-dimensional ultrasonography, the calcaneopedal block deviation has the potential to predict postnatal treatment.

In this paper, we investigate a financial market in which asset prices evolve based on a multi-dimensional Brownian motion process and a multi-dimensional Poisson process with different credit and deposit rates We proceed to evaluate European options by establishing upper and lower hedging prices through a transition to a suitable auxiliary market. Additionally, we address the minimization of shortfall risk and no-arbitrage price bounds in incomplete markets within this framework.

In recent years, vision-centric perception has played a crucial role in autonomous driving tasks, encompassing functions such as 3D detection, map construction, and motion forecasting. However, the deployment of vision-centric approaches in practical scenarios is hindered by substantial latency, often deviating significantly from the outcomes achieved through offline training. This disparity arises from the fact that conventional benchmarks for autonomous driving perception predominantly conduct offline evaluations, thereby largely overlooking the latency concerns prevalent in real-world deployment. While a few benchmarks have been proposed to address this limitation by introducing effective evaluation methods for online perception, they do not adequately consider the intricacies introduced by the complexity of input information streams. To address this gap, we propose the Autonomous-driving Streaming I/O (ASIO) benchmark, aiming to assess the streaming inputs characteristics and online performance of vision-centric perception in autonomous driving. To facilitate this evaluation across diverse streaming inputs, we initially establish a dataset based on the CARLA Leaderboard. In alignment with real-world deployment considerations, we further develop evaluation metrics based on information complexity specifically tailored for streaming inputs and streaming performance. Experimental results indicate significant variations in model performance and ranking under different major camera deployments, underscoring the necessity of thoroughly accounting for the influences of model latency and streaming inputs characteristics during real-world deployment. To enhance streaming performance consistently across distinct streaming inputs features, we introduce a backbone switcher based on the identified streaming inputs characteristics. Experimental validation demonstrates its efficacy in perpetually improving streaming performance across varying streaming inputs features.

On the basis of the findings of this paper, the theories of quantum mechanics and general relativity can be expressed in a comprehensive theory. The events were surveyed length of the time, in the Euclidean six-dimensional space-time (R6=x1+x2+x3+t1+t2+t3). Previous studies have not studied the relationship between the origin of matter's inherent properties, fundamental constants, and quantum mechanics phenomenon with space-time geometry. This theory prediction the with certainty obtained probabilistic results of quantum mechanics. This prediction is on the basis of metric resulting from the Eccentricity of the Ellipse due to the object density, in the length of time. The cause and nature of dark matter and dark energy are the findings of this article.

Quantile regression model is widely used in variable relationship research of general size data, due to strong robustness and more comprehensive description of the response variables' characteristics. With the increase of data size and data dimension, there have been some studies on high-dimensional quantile regression under the classical statistical framework, including higher-efficient frequency perspective, which is however at cost of randomness quantification, or lower-efficient Bayesian method based on MCMC sampling. To overcome these problems, we propose the high-dimensional quantile regression with Spike-and-Slab Lasso penalty based on variational Bayesian (VBSSLQR), which can not only improve the computational efficiency but also measure the randomness via variational distributions. The simulation studies and real data analysis illustrate that the proposed VBSSLQR method is superior to or equivalent to other quantile and non-quantile regression methods (including Bayesian and non-Bayesian methods), and its efficiency is higher than any other method.

The poor success rate of preclinical drugs which target the nervous system is related to the highly complex nature of brain physiology and pathophysiology. For in vitro drug screening in this field, the two-dimensional (2D) approach - where cells are incubated in a monolayer - is not physiologically relevant. In contrast, in vivo rodent models are very low throughput and expensive. As such, improved, well-characterised three dimensional (3D) in vitro models should be employed to bridge the gap between 2D in vitro primary screening and rodent models by incorporating aspects of the in vivo brain environment. These key features include the extracellular matrix (ECM) and a multidimensional relationship of supporting cells. In this study, a neural progenitor cell line was differentiated into the main types of cells found in brain, including neurons and astrocytes. This model was designed in a 3D extracellular matrix replacement in a minimalised manner. Different culture formats using multi-well plates were explored and a high-throughput cellular imaging platform was applied. Next, we applied this model to assess neural toxicity of a newly synthesised dual-specificity tyrosine-regulated kinase 1 (DYRK1) inhibitor derived from natural compounds, which is structurally related to a natural DYRK1A inhibitor harmine, K04179. Chemical studies have already shown that K04179 has higher specificity to DYRK1A compared with previously reported DYRK1 inhibitors, such as INDY. We have produced the first report of the biological effects of this new compound on the new 3D minimalised mid-brain model with quantification of both neuronal and astrocyte populations in tandem, revealing differential toxic effects of DYRK1 inhibitor compounds K04179 and INDY on neurons and glia.

In this paper we provide a highly selected review and synthesis on some of the recent and notable contribution to research in portfolio analysis. A unique perspective on this development in the literature is offered in this paper by judiciously identifying a few sample eigenvalues adjustment patterns in a portfolio that leads to an improvement in the out-of-sample portfolio Sharpe ratio when the population covariance matrix admits a high-dimensional factor model. These patterns unveil a key insight into a portfolio performance improvement and shed an important light on the effectiveness of a few recently introduced ”robust to estimation errors” covariance matrix estimation approaches, which were not originally designed with the goal to improve the out-of-sample portfolio performance.

Nisin, an antibacterial compound produced by Lactococcus lactis strains, has been approved by the US Food and Drug Administration to be used as a safe food additive to control the growth of undesirable pathogenic bacteria. Nisin is commonly described as a pH-dependent primary metabolite, since its production depends on growth and culture pH evolution. However, the relationship between bacteriocin synthesis and the consumption of the limiting nutrient has not been described until now. Therefore, this study aimed to develop a competitive four-dimensional Lotka Volterra-like equation to describe the relationships between culture pH, limiting nutrient (total nitrogen: TN) consumption and production of biomass (X) and nisin (BT) in four series of batch fermentation with L. lactis CECT 539 in diluted whey (DW)-based media. The developed four-dimensional LV-like equation (with a unique set of parameters) could not be used to describe all cultures belonging to each fermentation series. However, the four-dimensional LV-like equation described accurately each individual culture, providing a good description of the relationships between pH, TN, X and BT, higher values for R2 and F-ratios, lower values (&lt; 10%) for the mean relative percentage deviation modulus, with bias and accuracy factor values approximately equal to one.

This paper proposes a contact force controller for a constrained flexible manipulator in three-dimensional motion. This controller used the conversion formula obtained empirically and experimental results showed the effectiveness of the proposed contact force controller. First, the manipulator was operated with the tip of the second link restrained, then, time response of the root strain, joint angles and contact force were used to derive the relational between the three quantities. The effectiveness of the relational expression was verified by conducting a target contact force tracking experiment by inputting the angle from the relational expression. The contact force control using the strain feedback method was proposed with the strain amount estimated from the target contact force as the target value, and its effectiveness was verified by experiments. From the results obtained, controller using the strain feedback method was designed for the purpose of controlling the contact force at the tip of a flexible manipulator with two links and three degrees of freedom that performs three-dimensional spatial motion, and its effectiveness was shown by comparison with the contact force feedback method.

In recent years, intelligent fault diagnosis algorithms using deep learning method have achieved much success. However, the signals collected by sensors contain a lot of noise, which will have a great impact on the accuracy of the diagnostic model. To address this problem, we propose a one-dimensional convolutional neural network with multi-scale kernels (MSK-1DCNN) and apply this method to bearing fault diagnosis. We use a multi-scale convolution structure to extract different fault features in the original signal, and use the ELU activation function instead of the ReLU function in the multi-scale convolution structure to improve the anti-noise ability of MSK-1DCNN; then we use the training set with pepper noise to train the network to suppress overfitting. We use the Western Reserve University bearing data to verify the effectiveness of the algorithm and compare it with other fault diagnosis algorithms. Experimental results show that the improvements we proposed have effectively improved the diagnosis performers of MSK-1DCNN under strong noise and the diagnosis accuracy is higher than other comparison algorithms.

Big Data classification has recently received a great deal of attention due to the main properties of Big Data, which are volume, variety, and velocity. The furthest-pair-based binary search tree (FPBST) shows a great potential for Big Data classification. This work attempts to improve the performance the FPBST in terms of computation time, space consumed and accuracy. The major enhancement of the FPBST includes converting the resultant BST to a decision tree, in order to remove the need for the slow K-nearest neighbors (KNN), and to obtain a smaller tree, which is useful for memory usage, speeding both training and testing phases and increasing the classification accuracy. The proposed decision trees are based on calculating the probabilities of each class at each node using various methods; these probabilities are then used by the testing phase to classify an unseen example. The experimental results on some (small, intermediate and big) machine learning datasets show the efficiency of the proposed methods, in terms of space, speed and accuracy compared to the FPBST, which shows great potential for further enhancements of the proposed methods to be used in practice.

Cold gas-dynamic spray (cold spray) is an evolving coating deposition and restoration technology in which particles are deposited above the sonic speed. This paper presents the non-destructive three-dimensional characterization of cold sprayed stainless steel coating. The visualization of coating morphology and volumetric porosity, and the analyses of porosity size and spatial distributions confirmed that dense stainless steel coating with non-connected, micron-sized gradient porosity is successfully produced by cold spray. The suitability of X-ray tomography for characterizing cold sprayed coatings is assessed.

Object. Utilization of pedicle screws (PS) for spine stabilization is common in spinal surgery. With reliance on visual inspection of anatomical landmarks prior to screw placement, the free-hand technique requires a high level of surgeon skill and precision. Three-dimensional (3D) computer-assisted virtual neuronavigation improves the precision of PS placement and minimize steps. Methods. Twenty-three patients with degenerative, traumatic, or neoplastic pathologies received treatment via a novel three-step PS technique that utilizes a navigated power driver in combination with virtual screw technology. 1) Following visualization of neuroanatomy using intraoperative CT, a navigated 3-mm match stick drill bit was inserted at anatomical entry point with screen projection showing virtual screw. 2) Navigated Stryker Cordless Driver with appropriate tap was used to access vertebral body through pedicle with screen projection again showing virtual screw. 3) Navigated Stryker Cordless Driver with actual screw was used with screen projection showing the same virtual screw. One hundred and forty-four consecutive screws were inserted using this three-step, navigated driver, virtual screw technique. Results. Only 1 screw needed intraoperative revision after insertion using the three-step, navigated driver, virtual PS technique. This amounts to a 0.69% revision rate. One hundred percent of patients had intraoperative CT reconstructed images to confirm hardware placement. Conclusions. Pedicle screw placement utilizing the Stryker-Ziehm neuronavigation virtual screw technology with a three step, navigated power drill technique is safe and effective.

In this paper, we investigate the so-called electronic dressed states, a unified quasiparticle resulting from the interaction between electrons in a two-dimensional material with an off-resonance optical dressing field. If the frequency of this field is much larger than all characteristic energies in the system, such as the Fermi energy or bandgap(s), the electronic band structure is affected by radiation so that some important properties of the electron dispersions could be modified in a way desirable for practical applications. For example, a circularly polarized light can be used to vary the bandgap of Dirac materials: it opens a gap in graphene and other metallic and semimetallic lattices, or modifies the magnitude of an existing gap. This will either enhance or reduce a gap, depending on its initial value as well as properties of a host material. Here, we consider gaped dice and Lieb lattices as samples, and put forward a full theoretical model to reveal how these electronic states are deformed by an elliptically-polarized irradiation with a focus on generation and modification of a bandgap.

International law faces numerous challenges in the 21st century, ranging from the traditional issues of sovereignty to emerging threats like cyber warfare and climate change. This article explores the evolving landscape of international law, discussing both the challenges it faces and the prospects for its future. By examining the role of international organizations, the impact of technological advancements, and the growing influence of non-state actors, this article provides a comprehensive overview of the current state of international law and offers insights into how it can adapt to meet the demands of an increasingly interconnected world.

Businesses now formally enter the phase of "think power differentiation and gap" in response to the new economic climate. While AI, big data, empowerment via the internet, and other aspects of the digital economy help to improve technical capabilities and save operating costs, they also push businesses to innovate their strategies at a faster rate. Enterprises are strategically choosing to de-enterprise, moving from focusing on a single business functioning benefit to building an ecosystem of platform services that will give them a competitive edge. Additionally, the organization's structure is evolving continually from a vertical model to a curved working style, in order to achieve this, businesses must recognize the importance of data analysis in day-to-day management and operations, encourage the development of an organizational atmosphere that is driven by data, fully utilize digital technology, modularize areas or production links that perform related tasks, and encourage the reform of organizational structures. By streamlining the output of the product or service to the external community while also enhancing the company's financial performance model, switching from process-to result-oriented evaluation, and putting in place a customized authority and accountability framework. Replace outcome-focused evaluation with process-focused evaluation, and create a customized incentive scheme that balances power, accountability, and rewards.

Human sepsis is one of the leading cause of death worldwide and is known to be a harmful damaging host inflammatory condition, primarily caused by endotoxin released by gram-negative bacteria. Despite antibiotics administration being widely used to treat disease, effective targeted therapeutic strategies for the sepsis are still lacking. Here, we demonstrate that CM1, a derivative of natural polyphenol chrysin, exerts anti-inflammatory activity by inducing the ubiquitin-editing protein TNFAIP3 and NAD-dependent deacetylase sirtuin 1 (SIRT1). We found that CM1 attenuated Toll-like receptor 4 (TLR4)-induced the generation of inflammatory cytokines by inhibiting the extracellular-signal-regulated kinase (ERK)/MAPK and nuclear factor kappa B (NF-κB) signaling pathway. In addition, the treatment of macrophages with CM1 induced the expression of TNFAIP3 and SIRT1 in TLR4-stimulated primary macrophages, however the anti-inflammatory properties of CM1 was disappeared by siRNA silencing of TNFAPI3 or by the genetic and pharmacologic inhibition of SIRT1. Importantly, intravenously administration of CM1 resulted in the decreased susceptibility to endotoxin-induced sepsis, leading to inhibition of the generation of proinflammatory cytokines and neutrophils infiltration into lung than control mice. Collectively, these findings suggest that CM1 has the potential to be a treatment candidate for diverse inflammatory diseases including sepsis.

Oncostatin M (OSM), an inflammatory cytokine belonging to interleukin-6 superfamily, is recognized as an essential factor secreted by osteal macrophages to orchestrate bone remodelling. Osteoprotegerin (OPG) produced by osteoblasts regulates osteoclastogenesis. We previously demonstrated that bone morphogenetic protein-4 (BMP-4) stimulates OPG synthesis in osteoblast-like MC3T3-E1 cells, and that SMAD1/5/8(9), p38 mitogen-activated protein kinase (MAPK), and p70 S6 kinase positively regulates the OPG synthesis. The present study is aimed to investigate the effect of OSM on BMP-4-stimulated OPG synthesis in osteoblasts. OSM suppressed the release and the mRNA expression of OPG upregulated by BMP-4 in MC3T3-E1 cells.  Neither the BMP-4-induced phosphorylation of SMAD1/5/9 nor that of p38 MAPK affected by OSM. On the other hand, the BMP-4-stimulated phosphorylation of p70 S6 kinase was considerably suppressed by OSM. These results strongly suggest that OSM suppresses the BMP-4-stimulated OPG synthesis via inhibition of the p70 S6 kinase-mediated pathway in osteoblasts.

(1) Background: The aim of this study was to analyze the relationship between the serum levels of soluble transferrin receptor (sTfR) and interleukin 4 (IL-4), and disease activity and organ mani-festations in SLE patients. (2) Methods: We studied 200 SLE patients and 50 controls. We analyzed disease activity, organ involvement, serum sTfR, IL-4, and interleukin-6 (IL-6) levels, and antinu-clear and antiphospholipid antibody profiles. (3) Results: The median serum levels of sTfR (p>0.000001) and IL-4 (p<0.00001) were higher in the study group than in the controls. SLE patients, compared to the controls, had significantly lower HGB levels (p<0.0001), a lower iron concentration (p=0.008), a lower value of total iron-binding capacity (TIBC) (p=0.03), and lower counts of RBC (p=0.004), HCT (p=0.0004), PLT (p=0.04), neutrophil (p=0.04), and lymphocyte (p<0.0001). Serum sTfR levels were negatively correlated with lymphocyte (p=0.0005), HGB (p=0.0001) and HCT (p=0.008), and positively correlated with IL-4 (p=0.01). Elevated serum sTfR >2.14 mg/dL was associated with an increased risk of myocardial infarction (OR: 10.6 95 CI 2.71–464.78; p=0.001), ischemic heart disease (OR: 3.25 95 CI 1.02–10.40; p=0.04), lung manifestations (OR: 4.48 95 CI 1.44–13.94; p=0.01), and hematological manifestations (OR: 2.07 95 CI 1.13–3.79; p=0.01), and with a reduced risk of neuropsychiatric manifestations (OR: 0.42 95 CI 0.22–0.80; p=0.008). Serum IL-4 was negatively correlated with CRP (p=0.003), and elevated serum IL-4 levels > 0.17 mg/l were associated with a reduced risk of mucocutaneous manifestations (OR: 0.48 95 CI 0.26–0.90; p=0.02). (4) Conclusions: In SLE patients, elevated serum levels of sTfR were associated with an increased risk of cardiovascular, pulmonary, and hematological manifestations, and with a decreased risk of neuropsychiatric manifestations. In contrast, elevated serum IL-4 levels were associated with a decreased risk of mucocutaneous manifestations.

CD44 is a type I transmembrane glycoprotein, and possesses various isoforms which are largely classified into CD44 standard and CD44 variant (CD44v) isoforms. Some variant-encoded regions play critical roles in tumor progression. However, the function of CD44 variant 4 (CD44v4)-encoded region has not been fully understood. Using peptide immunization, we developed an anti-CD44v4 mAb, C₄₄Mab-108, which is useful for flow cytometry, western blotting, and immunohistochemistry. In this study, we determined the critical epitope of C₄₄Mab-108 by enzyme-linked immunosorbent assay (ELISA). We used the alanine (or glycine)-substituted peptides of the CD44v4-encoded region (amino acids 271-290 of human CD44v3-10), and found that C₄₄Mab-108 did not recognize the alanine-substituted peptides of D280A and W281A. Furthermore, these peptides could not inhibit the recognition of C₄₄Mab-108 in flow cytometry and immunohistochemistry. The results indicate that the critical binding epitope of C₄₄Mab-108 includes Asp280 and Trp281 of CD44v3-10.

Novel effluent treatment solutions for dangerous organic pollutants are crucial worldwide. In recent years, chemical reduction using noble metal-based nanocatalysts and NaBH4, a reducing agent, has become common practice for eliminating organic contaminants from aquatic environments. We suggest a straightforward approach to synthesizing magnetic cellulose nanocrystals (CNC) modified with magnetite (Fe3O4) and silver nanoparticles (Ag NPs) as a catalyst for organic contamination removal. Especially, Ag NPs were decorated on the CNC surface without reducing agents or stabilizers by reducing AgNO3. XRD, FE-SEM, TEM, EDX, VSM, BET, and zeta potential tests characterized the Ag/Fe3O4/CNC nanocomposite. The nanocomposite's catalytic activity was tested by eliminating 4-nitrophenol (4-NP) and organic dyes methylene blue (MB) and methyl orange (MO) in an aqueous solution at 25 oC. The Ag/Fe3O4/CNC nanocomposite reduced 4-NP and decolored these hazardous organic dyes in short time (2 to 5 min) using a tiny amount of catalyst (2.5 mg for 4-NP and 15 mg for MO and MB). The magnetic catalyst was removed and reused three times without losing catalytic activity. This work shows that the Ag/Fe3O4/CNC nanocomposite can chemically reduce harmful pollutants in effluent for environmental applications.

SMARCA4-deficient non-small cell lung cancer (NSCLC) is a more recently recognized subset of NSCLC. We describe the 18F-fluorodeoxyglucose (FDG) PET/CT findings in a rare case of SMARCA4-deficient NSCLC and response to therapy. A 45-year-old male patient with a history of heavy smoking (10 years) underwent an 18F-fluorodeoxyglucose (FDG) PET/CT dynamic (chest) + static (whole-body) scan for diagnosis and pre-treatment staging. 18F-FDG PET/CT showed an FDG-avid mass in the upper lobe of the left lung (SUVmax of 22.4) and FDG-avid lymph nodes (LN) in the left pulmonary hilar region (SUVmax of 5.7). In addition, there are multiple metastases throughout the body, including distant LNs, adrenal glands, bone, and brain. Pathological findings confirmed SMARCA-4 deficient NSCLC. After 4 cycles of chemotherapy and immune checkpoint inhibitors（ICI）, the patient underwent again an 18F-FDG PET/CT scan (including dynamic scan) for efficacy evaluation. We report cases that deepen the understanding of the 18F-FDG PET/CT presentation of SMARCA4-deficient NSCLC as well as dynamic imaging features and parametric characteristics.

Crataegus Oxyacantha is used in the treatment of cardiovascular diseases. In related to your biosafety, only in vitro and in vivo genotoxicity of the fruit and the leaf is described, however, the teratogenic potential is unknown. The aim this study was evaluating the transplacental genotoxicity effect of aqueous and hydroalcoholic extract of leaves C. oxyacantha in a rat model and the quantification of malondialdehyde (MDA) in liver. Three different doses of the aqueous and hydroalcoholic extracts of the C. oxyacantha leaf were administered orally (500, 1000 and 2000 mg/kg) to Wistar rats during 5 days through the pregnancy term (16-21 days), sampling in rats were every 24 h during the last 6 days of gestation and only one sample was taken in neonates at birth. A sample of the mother's and neonate's liver was taken for the determination of MDA. The results show that, at the hepatic level, the evaluated doses of extracts C. oxyacantha in pregnant rats and their pups did not show cytotoxicity. However, the aqueous and hydroalcoholic extract generated cytotoxic and genotoxic damage in the short term. On the other hand, only the aqueous extract showed a teratogenic effect. Based on these results, the aqueous and hydroalcoholic extracts of the C. oxyacantha leaf should not be administered during pregnancy.

As the echoes of ChatGPT's remarkable success continue to permeate the AI community, its formidable successor, GPT-4, has emerged, showing off a wealth of novel features. In this concise paper, we elucidate the capabilities of GPT-4 and conduct a comparative analysis with its predecessor, ChatGPT, offering insights into their relative strengths and advancements in the rapidly evolving field of generative AI. We also present a comprehensive summary of the major performance results reported by OpenAI on GPT-4 across various Natural Language Processing (NLP) tasks. We place great emphasis on the innovative advancements offered by GPT-4 in comparison to its predecessors. Our focus is on highlighting its remarkable performance while also mentioning its limitations. The purpose of this paper is to deliver a succinct understanding of the new features and performance benchmarks of GPT-4.

It was the aim of this study to compare the ratio of salbutamol and its major metabolite salbutamol-4’-O-sulfate as well as the quantity excreted renally after oral and inhalative administration. Additionally, the excretion pattern after application of racemic salbutamol opposed to the pure enantiomer levosalbutamol was evaluated. For quantitation of the sulfonated metabolite of salbutamol, reference material was synthesized and characterized by NMR and HRMS. Urine samples were analyzed by ultrahigh performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). Salbutamol is mainly metabolized by sulfotransferase 1A3 (SULT1A3), which is most abundantly found in the jejunum. A high first pass effect occurs upon oral administration, which leads to a higher amount of salbutamol-4’-O-sulfate in urine compared to unchanged salbutamol excreted within the first hour post administration. Thus, when administered orally, the proportion of metabolite to total salbutamol was higher than for inhalative administration in the early urinary excretion. Levosalbutamol is the favored enantiomer of SULT1A3 and therefore metabolized at a higher rate whereas racemic salbutamol shows a reduced proportion between metabolite and parent compound. The amount of sulfoconjugate was found higher than that of the parent compound for all urine samples except for those excreted in the first hour after inhalative administration.

CRISPR-Cas allows us to introduce desired genome editing, including mutations, epitopes, and deletions with unprecedented efficiency. The development of CRISPR-Cas has progressed to such an extent that it is now applicable in various fields with the help of model organisms. C. elegans is one of the pioneering animals in which numerous CRISPR-Cas strategies have been rapidly es-tablished over the past decade. Ironically, the emergence of numerous methods makes the right choice of method difficult. Choosing an appropriate selection or screening approach is the first step in planning a genome modification. This report summarizes the key features and applications of CRISPR-Cas methods using C. elegans and illustrates key strategies. Our overview of significant advances in CRISPR-Cas will help readers to understand current advances in genome editing and navigate various methods of CRISPR-Cas genome editing.

G‐quadruplexes (G4) are structures formed at the ends of the telomere, these are rich in guanines and were stabilized by molecules that bind to specific sites. TMPyP4 and Thymoquinone (TQ) are small molecules that bind to the G4, they have drawn attention because of their role as telomerase inhibitors. The aim of this study was to evaluate the effects of telomerase inhibitors on cellular proliferation, senescence, and death. Two cell lines LC‐HK2 (NSCLC) and RPE‐1 were treated with TMPyP4 (5μM) and TQ (10μM). Both inhibitors were effective in decreasing telomerase activity. TMPyP4 increased the percentage of cells with membrane damage associated with cell death and decreased the frequency of cells in the S‐phase. TMPyP4 changed the cell adhesion ability and modified the pattern of focal adhesion. TQ acted in a dose‐dependent manner, increasing the frequency of senescent cells, and inducing cell cycle arrest in the G1. In conclusion, the effects of both drugs on LC-HK2 and RPE-1 cell lines were different although both are telomerase inhibitors, because TMPyP4 decreased proteins of cell adhesion and TQ induces a decrease in cell viability.

Different types of engineered cardiac constructs are being developed nowadays by many research groups. However, the immunological properties of such artificial tissues are not yet clearly understood. Previously, we have studied microfiber scaffolds carrying iPSC-derived cardiomyocytes. In this work, we evaluated the ability of these tissue-engineered constructs to activate the expression of CD28 and CTLA-4 proteins in T-lymphocytes which are early markers of the immune response. For this purpose electrospun PLA nanofibrous scaffolds were seeded with human iPSCs-CM and cultivated for 2 weeks. After, allogeneic mononuclear cells were co-cultured during 48 hours with 3 groups of samples that were tissue-engineered constructs, pure culture of cardiomyocytes and bare scaffolds followed by analysis of CD28/CTLA-4 expression on T-lymphocytes via flow cytometry. PLA scaffolds and concanavalin A (positive control) stimulation statistically significantly increased CD28 expression on CD4+ cells (up to 61.3% and 66.3%) and on CD8+ cells (up to 17.8% and 21.7%). CD28/CTLA-4 expression didn’t increase during co-cultivation of T-lymphocytes with cardiac engineered constructs and iPSC-CM monolayers. Thus, iPSCs-CM in monolayers and on PLA nanofibrous scaffolds didn’t cause T-cell activation, which allows us to expect that such cardiac constructs are not a cause of rejection after implantation.

The KRAS mutant population has been undruggable for 40 years. G12C inhibitors and immunotherapy are the beginning of success. It is necessary to summarize the successful experience of the existing treatment model and explore the direction of the next treatment. In this review, we discuss the latest developments in targeted therapy and immunotherapy for KRAS-mutation NSCLC, aiming to provide direction or enlightenment for future treatment strategies.

Multiple myeloma (MM) is characterized by the malignant proliferation of monoclonal plasma cells in the bone marrow with an elevation in monoclonal paraprotein, renal impairment, hypercalcemia, lytic bony lesions, and anemia. Immune cells and associated cytokines play a significant role in MM growth, progression, and dissemination. While some cytokines and their clinical significance are well described in MM biology, others remain relatively unknown. The aim of the present study was to assess the impact of pretreatment serum levels of 27 selected cytokines on progression-free survival (PFS) and overall survival (OS) in MM patients before first-line therapy with bortezomib-based regimens. Serum cytokine levels were assayed with a Bio-Rad Bio-Plex Pro Human Cytokine 27-Plex Assay on the MAGPIX Multiplex Reader and the Bio-Plex® 200 System (Bio-Rad) including IL-1β, IL-1Ra, IL-2, IL-4, IL-5, IL-6, IL-7, IL-8, IL-9, IL-10, IL-12, IL-13, IL-15, IL-17, Eotaxin, FGF, G-CSF, GM-CSF, IFN-γ, IP-10, MCP-1, MIP-1α, MIP-1β, PDGF-BB, RANTES, TNF-α, and VEGF. A total of 61 MM patients were examined. Most patients received a bortezomib, cyclophosphamide and dexamethasone (VCD) chemotherapy regimen. In the final multivariate model, IL-13 cytokine level (HR 0.1411, 95% CI: 0.0240-0.8291, p = 0.0302), and ASCT (HR 0.3722, 95% CI: 0.1826-0.7585, p=0.0065) significantly impacted PFS. Furthermore, ASCT (HR 0.142, 95% CI: 0.046-0.438, p=0.0007), presence of bone disease at diagnosis (HR 3.826, 95% CI: 1.471-9.949, p=0.0059) and two cytokine levels- IL-1Ra (HR 1.017, 95% CI: 1.004-1.030, p= 0.0091) and IL-4 (HR 0.161, 95% CI: 0.037-0.698, p = 0.0147) were independent predictors of OS. Three clusters of MM patients were identified with different cytokine profiles. In conclusion, serum pretreatment levels of IL-13 and IL-4 are predictors of better PFS and OS, respectively, whereas IL-1Ra pretreatment levels negatively impact OS in MM patients treated with bortezomib-based chemotherapy. Cytokine signature profile may have a potential influence on the outcome of patients treated with bortezomib.

Immune checkpoint inhibitors (ICIs) have obtained durable responses in many cancers, making it possible to foresee their potential in improving the health of cancer patients. However, immunotherapies are limited at the moment to a minority of patients and there is a need for a better understanding of the basic molecular mechanisms and functions of pivotal immune regulatory molecules. Immune checkpoint cytotoxic T-lymphocyte-associated protein 4 (CTLA-4) and regulatory T (Treg) cells play pivotal roles in hindering the anticancer immunity. Treg cells suppress antigen-presenting cells (APCs) by depleting immune stimulating cytokines, producing immunosuppressive cytokines and constitutively expressing CTLA-4. CTLA-4 molecules bind with higher affinity to CD80 and CD86 than CD28 and act as competitive inhibitors of CD28 in APCs. The purpose of this review is to summarize state-of-the-art understanding of the molecular mechanisms underlining CTLA-4 immune regulation and the correlation of ICI response with CTLA-4 expression in Treg cells from preclinical and clinical studies for possibly improving CTLA-4-based immunotherapies, while highlighting the knowledge gap.

Hepatic encephalopathy (HE) is a form of brain dysfunction that is specifically caused by liver insufficiency and/or portal-systemic shunt. The exact nature of HE is debated, so that conflicting uses of the term HE may cause inconsistencies in its detection and, in turn, issues with its management. This review highlights the meaning of the term HE on the basis of both its historical origins and current consensus. It also provides criteria for the diagnosis of the condition, on the basis of its phenotypes and the risk factors for its occurrence. The procedure for differential diagnosis from other conditions which result in similar phenotypes is considered, together with precipitants and confounders. Finally, the current multidimensional approach for the correct clinical recording of HE episodes is discussed.

Malignant gliomas are heterogeneous neoplasms. Glioma stem-like cells (GSCs) are undifferentiated and self-renewing cells that develop and maintain these tumors. These cells are the main population that resist current therapies. Genomic and epigenomic analyses has identified various molecular subtypes. Bone morphogenetic protein 4 (BMP4) reduces the number of GSCs through differentiation and induction of apoptosis, thus increasing therapeutic sensitivity. However, the short half-life of BMP4 impedes its clinical application. We have previously reviewed BMP4 signaling in central nervous system development and glioma tumorigenesis and its’ potential as a treatment target in human gliomas. Recent advances in understanding both adult and pediatric malignant gliomas highlight critical roles of BMP4 signaling pathways in the regulation of tumor biology, and indicate its’ potential as a therapeutic molecule. Furthermore, significant progress has been made on synthesizing BMP4 biocompatible delivery materials, which can bind to and markedly extend BMP4 half-life. Here, we review current research associated with BMP4 in brain tumors, especially in pediatric malignant gliomas. We also summarize BMP4 delivery strategies, with a focus on biocompatible BMP4 binding peptide amphiphile nanostructures as promising novel delivery platforms for treatment of these devastating tumors.

Binderless zeolite macrostructures in the form of ZK-4 microspheres were prepared using anion exchange resin beads as shape directing macrotemplates. The particles were synthesized under hydrothermal conditions at different temperatures and treatment times. The influence of the different synthesis parameters was investigated by X-ray diffraction, scanning electron microscopy, fluorescence X, nitrogen adsorption measurements and ²⁹Si solid NMR. Fully crystalline spheres similar in size and shape to the original resin beads were obtained by a hydrothermal treatment at the highest temperatures (150 - 180 °C) for a short treatment time of 24 h. The synthesized microspheres showed to be promising in the molecular decontamination of Volatile Organic Compounds (VOCs).

A new type of gold nanoparticles was synthesized by using benzoyl pyrazolone as a capping agent. The synthesized AuNPs exhibited a spherical shape and a monodisperse and fluorescence emission characteristic peak at 650 nm. The AuNPs –BMPBP was demonstrated as sensitive and selective fluorescent chemosensor for detection of Al ³⁺ ion. In the presence of Al ³⁺ ion, the fluorescent emission of BMPBP-AuNPs at 650 nm, increased with an increasing concentration of Al ³⁺ ion with a low detection limit (2 µM), the proposed method provided to apply determination of Al ³⁺ ion of tap water with satisfactory results.

The increased expression of β4-galactosyltransferase (β4GalT) 4 was closely associated with poor prognosis of colon cancer. Recently, we showed that the expression of the β4GalT4 gene is regulated by the 0.17 kb core promoter region containing one binding site for Specificity protein 1 (Sp1). To develop a novel screening method for anti-colon cancer drugs, two sensor cell lines having the luciferase gene under the control of two β4GalT4 gene promoters that differed in length were established from SW480 human colon cancer cells. The hGT4-0.17-sensor cells possessed the luciferase reporter driven by the 0.17 kb promoter, while the hGT4-0.3-sensor cells possessed the luciferase reporter driven by the 0.3 kb promoter containing one binding site each for colon cancer-related transcription factors including activator protein 2, E2F, caudal-related homeobox transcription factors, and Runt-related transcription factors besides Sp1. Upon treatment with mitogen-activated protein kinase inhibitor U0126, the promoter activities of the hGT4-0.3-sensor cells decreased significantly, while those of the hGT4-0.17-sensor cells unchanged. These results suggest that the responsiveness to U0126 differs between two sensor cell lines due to the different regulation of the luciferase reporters. This study provides the novel screening method for anti-colon cancer drugs by the combination of two sensor cell lines.

Distribution systems can form islands when faults occur. Each island represents a subsection with variable boundaries subject to the location of a fault(s) in the system. A subsection with variable boundaries is referred to as island in this paper. For operation in autonomous mode, it is imperative to detect the island configurations and stabilize these subsections. This paper presents a novel scheme for the detection of islanding boundaries and stabilizing the system during autonomous operation. In the first stage, a boundary detection method is proposed to detect the configuration of the island. In the second stage a dynamic voltage sensitivity factor (DVSF) is proposed to assess the dynamic performance of the system. In the third stage, a wide area load shedding program is adopted based on DVSF to shed the load in weak busbars and stabilize the system. The proposed scheme is validated and tested on a generic 18-bus system using a combination of EMTDC/PSCAD and MATLAB softwares.

The challenge of missing data in scientific research prompts researchers to decide between imputing incomplete data or discarding observations, where discarding can lead to information loss. Various methods exist, from simple deletion to sophisticated approaches like Multiple Imputation (MI). However, these methods often fall short with high-dimensional datasets. Multiple Imputation by Chained Equations (MICE) and Random Forest (RF) proximity imputation offer promising alternatives. Therefore, in this paper, we propose integrating MICE with Bayesian random forest (BRF) to enhance imputation accuracy and predictive power, particularly in high-dimensional analyses. Our approach combines MICE’s efficiency with BRF’s robustness, offering a comprehensive solution to missing data challenges. By way of example, we provide empirical evaluations to validate its effectiveness using synthetic data of various missing data scenarios. The results from the simulations showed that the combination of BRF and MICE offered a promising strategy for high-dimensional analysis in the presence of missing data.

As a new plant slope protection technology, living stumps can effectively improve slope stability. The current study attemptes to investigate the mechanical characteristics of the root system of living stumps and their reinforcement mechanism on slopes by carrying out a three-dimensional living stump slope modeling test. Using ABS materials, a 3D model of a living elm stump was created by 3D printing and a slope model test was carried out. The reinforcement mechanism of the living stump was studied through a combination of model testing and numerical simulation. The results indicate that, due to the presence of living stumps in the lower and middle parts of the slope, the maximum shear stress area of the soil moved to a deeper direction. The stress state of the soil around the living stump was effectively improved due to the existence of the lateral root system.Living stumps in the lower part of the slope cross the potential sliding surface and transferred the soil shear stress gradually to the root system through root-soil interaction. Moreover, the tap roots and lateral roots of living stumps form a robust spatial structure that bears the shear stress of soil together, thus increasing the stability of the slope.

Energy distance is used to eigenvalue distributions in this new Wishart distribution study, providing a new perspective on high-dimensional data. Multivariate statistics relies on Wishart distribution to explain covariance matrices. This analysis shows how degrees of freedom and covariance matrix configurations affect eigenvalue dispersion. We use energy distance based on eigenvalue distributions to assess Wishart distribution differences without the "curse of dimensionality" via extensive simulation simulations. This approach improves measurement accuracy and processing efficiency in distribution comparisons and enables new analytical pathways in scientific fields that need data covariance comprehension. Our results show that degrees of freedom and matrix structure considerably affect energy distances, expanding the theoretical framework and practical applications of statistical models.

To solve the problem of a uneven load for a dual-input counter-rotating transmission system, this research is based on Small Displacement Torsor Jacobian-Torsor theory.Considering the influence of the local parallel chain of a gearbox on the calculation accuracy of the backlash,the processing method of a meshing tooth pair parallel chain is proposed. The probability distribution of the tolerance band of gearbox manufacturing and assembly errors is modeled, the three-dimensional tolerance analysis model of a dual-input counter-rotating gearbox is established, and the Monte Carlo method is used to solve the backlash of the output end. The output backlash is solved with the Monte Carlo method, and the theoretical design backlash is combined with the output backlash to derive the gearbox side clearance range. The gearbox shaft system is analyzed statically, the range of the equal load coefficient is calculated, and the equal load performance optimization method based on the matching relationship between the gear backlash and the elastic shaft torsional stiffness is proposed. The correctness of the three-dimensional tolerance analysis combined with the elastic deflection angle used to optimize the equal load performance of the dual-input counter-rotating transmission system is verified by comparison with the relevant test data.

This work is devoted to the construction and study of commutative gates for a two-qubit quantum system. Using four-dimensional algebra developed by the Kazakh mathematician Abenov M.M. all groups of commutative gates have been constructed, and among all states of a two-qubit quantum system, unitary states with which a specific gate is connected have been identified. An explicit type of gate is described that transfers a quantum system from one unitary state to another unitary state. The proposed approach opens up new possibilities for the design of quantum algorithms not only for two-qubit quantum systems, but also for $n$-qubit quantum systems.

In this work, an entropy-stable and well-balanced numerical scheme for a one-dimensional blood flow model is presented. Such scheme is obtained from an explicit entropy conservative flux along with a second order discretization of the source term by using centered finite differences. We prove that the scheme is entropy-stable and preserves steady-states solutions. In addition, some numerical examples are included to test the performance of the proposed scheme.

In this study, cotton fabric reinforced phenolic resin (CPF) composites were modified by adding four two-dimensional fillers: graphitic carbon nitride (g-C3N4), graphite (Gr), molybdenum disulfide (MoS2), and hexagonal boron nitride (h-BN). The tribological properties of these modified materials were investigated under dry friction and water lubrication conditions. CPF/ Gr composite exhibits significantly better tribological performance than the other three fillers modified CPF composites under dry friction, with a 24% reduction in friction coefficient and a 78% reduction in wear rate compared to unmodified CPF composite. Under water lubrication conditions, all four fillers did not significantly alter the friction coefficient of the CPF composite. However, except for an excessive amount of Gr, the other three fillers can reduce the wear rate. Particularly, in the case of 10% MoS2 content, the wear rate decreased by 56%. Scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) were employed for the analysis of the morphology and composition of the transfer films. Additionally, molecular dynamics (MD) simulations were conducted to investigate the adsorption effects of Gr, MoS2, and PF on the counterpart surface under both dry friction and water lubrication conditions. The difference in the adsorption capacity of Gr and MoS2 on the counterpart, as well as the resulting formation of transfer films, accounts for the variation in tribological behavior between CPF/Gr and CPF/MoS2 composites. By combining the lubrication properties of MoS2 and Gr under dry friction and water lubrication conditions, using them as co-fillers can achieve a synergistic lubrication effect.

The research community has shown significant interest in the aqueous synthesis of nanomaterials due to its ability to eliminate the need for complex organic solvents. This synthesis approach aligns with the principles of green chemistry, attracting considerable attention. Aqueous solution technology in fabricating nanostructures has gained recognition for its potential to create ultrasensitive, low-energy, and ultrafast optoelectronic devices. This report focuses on synthesizing lead iodide (PbI2) nanoplates using a water-based solution technique and fabricating a planar photodetector. The photodetectors with a planar type of device structure (ITO/PbI2 NPs/Au) demonstrated a remarkable photosensitivity of 3.9×103 and a photoresponsivity of 0.51 mA/W at a wavelength of 405 nm. Notably, the asymmetrical output properties of ITO/PbI2 NPs/Au detector deliver additional evidence of the effective creation of a Schottky contact. Thus, the photodetector exhibited a photoresponse even at 0 V bias, leading to the realization of self-powered photodetectors. Additionally, the device exhibited a rapid photoresponse of 0.21/0.38 s (−5 V) in the visible range. This study has expanded the horizons for the aqueous-phase synthesis of nanoplate nanostructures, enabling the large-area fabrication of high-performance photodetectors.

The natural units of measure lauded by Max Planck more than 100 years ago are rarely used today. But many physical constants, including Planck's constant, the gravitational constant, the speed of light, vacuum permittivity, and vacuum permeability, consist of natural units in their unit dimensions. The natural units are present in all formulas containing these constants. The defining characteristic of the natural units is an alignment of unit values at the Planck scale. This alignment gives a computational basis of proportionality from which the correlated properties and dynamics of elementary particles, including wavelength, period, mass, momentum, and energy, manifest in equal or inversely proportional ratios of the Planck scale. These correlations explain many of the defining equations of quantum mechanics, classical gravity, and electromagnetism.

Due to increasing concerns about global warming and energy crisis, intensive efforts have been made to explore renewable and clean energy sources. Single-atom metals and two-dimensional (2D) nanomaterials have attracted extensive attention in the fields of energy and environment because of their unique electronic structures and excellent properties. In this review, we sum-marize the state-of-art progress on the single-atom metal supported at 2D MoS2 (single-atom metal/2D MoS2) for electrochemical CO2 reduction and water splitting. First, we introduce the advantages of single-atom metal/2D MoS2 catalysts in the fields of electrocatalytic CO2 reduction and water splitting, followed by the strategies for improving electrocatalytic performances of single-atom metal/2D MoS2 hybrid nanomaterials and the typical preparation methods. Further, we discuss the important applications of the nanocomposites in electrocatalytic CO2 reduction and water splitting via some typical examples, particularly focusing on their synthesis routes, modification approaches, and physiochemical mechanisms for improving their electrocatalytic performances. Finally, our perspectives on the key challenges and future directions of exploring high-performance metal single-atom catalysts are presented based on recent achievements in the development of single-atom metal/2D MoS2 hybrid nanomaterials.

High-dimensional measurement error data are becoming more prevalent across various fields. Research on measurement error regression models has gained increasing attention due to the risk of drawing inaccurate conclusions if measurement errors are ignored. When the dimension p is larger than the sample size n, it is challenging to develop statistical inference methods for high-dimensional measurement error regression models due to the existence of bias, nonconvexity of objective function, high computational cost and many other difficulties. Over the past few years, some works have overcome the aforementioned difficulties and proposed several statistical inference methods. This paper mainly reviews the current development on estimation, hypothesis testing and variable screening methods for high-dimensional measurement error regression models and shows the theoretical results of these methods with some directions worthy of exploring for future research.

Manual measurement of rock discontinuities is time-consuming and subjective according to the experience of the surveyor. This work proposes a three-dimensional laser scanning-based method for the semi-automatic identification of rock discontinuities. Multisite cloud scanning is performed with real-time kinematic (RTK)-assisted orientation to estimate the rock fracturing degree; then, discontinuity orientations are extracted with the man–machine interactive method or automatic method. The proposed method was applied to actual examples to illustrate its accuracy at identifying rock discontinuities. The sensitivity of the identification accuracy to different parameters was investigated.

Additive manufacturing (AM) is an emerged layer-by-layer manufacturing process. However, its broad adoption is still hindered by limited material options, different fabrication defects, and inconsistent part quality. Material extrusion (ME) is one of the most widely used AM technologies, and, hence, is adopted in this research. Low-cost metal ME is a new and AM technology used to fabricate metal composite parts using sintered metal infused filament material. Since the involved materials and process are relatively new, there is a need to investigate the dimensional accuracy of ME fabricated metal parts for real-world applications. Each step of the manufacturing process, from the material extrusion to sintering, might significantly affect the dimensional accuracy. This research provides a comprehensive analysis of dimensional changes of metal samples fabricated by the ME and sintering process, using statistical and machine learning algorithms. Machine learning (ML) methods can be used to assist researchers in sophisticated pre-manufacturing planning and product quality assessment and control. This study compares linear regression to neural networks in assessing and predicting the dimensional changes of ME made components after 3D printing and sintering process. The prediction outcomes using a neural network performed the best with the highest accuracy as compared to regression. The findings of this study can help researchers and engineers to predict the dimensional variations and optimize the printing and sintering process parameters to obtain high quality metal parts fabricated by the low-cost ME process.

We review the latest developments in the field of the metal-insulator transition in strongly-correlated two-dimensional electron systems. Particular attention is given to recent discoveries of a sliding quantum electron solid and interaction-induced spectrum flattening at the Fermi level in high-quality silicon-based structures.

This paper addresses the problem of assessing and optimizing acoustic positioning system for underwater target localization with range measurements only. We present a new three-dimensional assessment model to assess the optimal geometric beacon formation whether meet user needs. For the sake of mathematical tractability, it is assumed that the measurements of the range between the target and beacons are corrupted with white Gaussian noise with variance is distance-dependent. Then by adopting dilution of precision (DOP) parameters in the assessment model, the relationship between DOP parameters and positioning accuracy is derived. In addition, the optimal geometric beacon formation that will yield the best performance is achieved by minimizing the values of geometric dilution of precision (GDOP) on condition that the position of target is known and fixed. Next, in order to make sure whether the estimate positioning accuracy over interesting region satisfy the precision needed by the users, geometric positioning accuracy (GPA), horizonal positioning accuracy (HPA) and vertical positioning accuracy (VPA) are utilized to assess the optimal geometric beacon formation. Simulation examples are designed to illustrate the exactness of the conclusion. Unlike other work which only use GDOP to optimize the formation and cannot assess the performance of the specified dimensions, this new three-dimensional assessment model can assess the optimal geometric beacon formation in each dimension for any point in three-dimensional space, which can provide users with guidance advices to optimize performance of every specified dimension.

Resistive patch array incorporating with metallic backplane provided an effective way to the achievement of broadband metamaterial absorbers(MAs). When loading metallic metamaterial to resistive MA, the outstanding construction helps realize more flexible and diversified forms of broadband absorption. In this paper, we attempted to load metallic resonators(MRs) to resistive MA in the three-dimensional construction, which benefits further enhancement of lower-frequency absorption. Simulation showed that the partial absorption band was separated to lower frequency, while the rest of broadband absorption was unaffected. Meanwhile, after combining multi-unit of the proposed MAs, the stair-stepping broadband absorption was also achieved. At last, three samples were fabricated. The agreements between simulations and experimental results demonstrated that resistive MA loaded with MRs provided an effective way for further enhancement of lower-frequency absorption with almost no change of the absorbing structure and areal density. Thus, it is worthy to expect a wide range of applications to emerge inspired from the proposed attempt.

Appropriate animal models of human diseases are a cornerstone in the advancement of science and medicine. To create animal models of neuropsychiatric and neurobehavioral diseases such as ASD necessitates the development of sufficient neurobehavioral measuring tools to translate human behavior to expected measurable behavioral features in animals. Indeed, at least in rodents, adequate neurobehavioral and neurological tests have been developed. Since ASD is characterized by a number of specific behavioral trends with significant severity, animal models of autistic-like behavior have to demonstrate the specific characteristic features, namely impaired social interactions, and communication, restricted, repetitive behavioral patterns with association to several additional impairments such as somatosensory, motor and memory impairments. Thus, an appropriate model must show behavioral impairment of a minimal number of neurobehavioral characteristics using an adequate number of behavioral tests. The proper animal models enable the study of ASD like-behavior from the etiologic, pathogenetic and therapeutic aspects. From the etiologic aspects, models have been developed by the use of immunogenic substances like polyinosinic-polycytidylic acid (PolyIC), Lipopolysaccharide (LPS) and propionic acid or other well-documented immunogens or pathogens, like mycobacterium tuberculosis. Another approach is the use of chemicals like valproic acid, Polychlorinated biphenyls (PCBs), organophosphate pesticides - chlorpyrifos (CPF) and others. These substances were administered either prenatally, generally after the period of major organogenesis, or, especially in rodents, during the early postnatal life. In addition, using modern genetic manipulation methods, genetic models have been created of almost all human genetic diseases that are manifested by autistic like behavior (i.e. fragile X, Rett syndrome, SHANK gene mutation Neuroligin genes and others). Ideally, we should not only evaluate the different behavioral modes affected by the ASD-like behavior but also assess the severity of the behavioral deviations by an appropriate scoring system, as applied to humans.

Epilepsy is known to cause alterations in neural networks. However, many details of these changes remain poorly understood. The objective of this study was to investigate changes in the properties of hippocampal CA1 pyramidal neurons and their synaptic inputs in a rat lithium-pilocarpine model of epilepsy. In the chronic phase of the model, we found a marked loss of pyramidal neurons in the CA1 area. However, the membrane properties of the neurons remained essentially unal-tered. The results of the electrophysiological and morphological studies indicate that the direct pathway from the entorhinal cortex to CA1 neurons is reinforced in epileptic animals, whereas the inputs to them from CA3 are either unaltered or even diminished. In particular, the dendritic spine density in the str. lacunosum moleculare, where the direct pathway from the entorhinal cortex ter-minates, was found to be 2.5 times higher in epileptic rats than in control rats. Furthermore, the summation of responses upon stimulation of the temporoammonic pathway was enhanced by approximately twofold in epileptic rats. This enhancement is believed to be a significant con-tributing factor to the heightened epileptic activity observed in the entorhinal cortex of epileptic rats using an ex vivo 4-aminopyridine model.

In this research, the primary goal was to investigate the relationship between strategic planning and organizational performance in Iraq's manufacturing context. The study's primary data sources were 360 manager respondents. The structured questionnaire was used to collect primary data from manufacturing firms located throughout Iraq. To analyze the result, the researcher used descriptive statistics, correlation, and multiple regression analysis. SPSS version 16 software was used to conduct data analysis. The result reveals that the process of strategic planning has a beneficial effect on financial performance. Environmental scanning has a statistically significant positive effect on a company's non-financial performance. Management participation and planning formality positively and statistically significantly affect a business's non-financial performance at the 10 percent level. The domain of strategy and technique has not impacted the company's non-financial performance.

This study proposes an innovative pharmacovigilance approach, VIGI-4, leveraging ChatGPT Teams Pro version. Our method involves aggregating data from all phase 4 studies published in February 2024 to identify adverse reactions. These results are categorized by disease state alphabetically, demonstrating the method's capacity to generate structured and easily navigable outputs. The results section is tailored to exemplify the valuable, actionable insights attainable through our workflow. This research emphasizes the game-changing potential of integrating advanced technologies such as ChatGPT into pharmacovigilance, signaling a new era in safeguarding drug safety.

Additive manufacturing (AM) or 3D printing of metals is gaining popularity due to its flexibility in fabricating parts with highly complex designs, as well as simplifying manufacturing steps and optimizing process times. In this investigation, 17-4 PH stainless steel was additively manufactured using Laser-Powder Bed Fusion (L-PBF), followed by functionalization through a DUPLEX treatment. This treatment involved a plasma-assisted nitriding process, followed by deposition of an arc-PVD c-Al0.7Cr0.3N hard coating. The microstructural modifications resulting from plasma nitriding (such as the formation of Fe2,3N and Fe4N, and the αN or expanded martensite phases), and the surface improvements with the c-Al0.7Cr0.3N coating on the 3D-printed 17-4 PH steel, are evaluated in comparison to conventionally manufactured 17-4 PH steel. These microstructural characteristics are correlated with the mechanical response of the treated surfaces. As a result of the plasma nitriding process, the hardness of the 3D-printed 17-4 PH SS increased by approximately 260%. The wear, measured through dynamic and static scratch-testing, was reduced by approximately 31%. This improvement was attributed to the modification of adhesive failure mechanisms, leading to a reduction in wear volume, improved coating adhesion, and enhanced scratch resistance.

This report provides a comprehensive overview of occupational asthma and respiratory hypersensitivity, focusing on some chemicals used in the workplace Includes numerous case studies and research papers related to occupational exposure methacrylates, such as HEMA-HPMA, and respiratory hypersensitivity are discussed And the relationship is explored The book also examines asthma pathophysiology, emerging drug delivery systems used to treat asthma, and the potential of nanoparticles , dendrimers and micellar systems have to improve pulmonary drug delivery in detail The worldwide prevalence of asthma is highlighted, with higher rates in high-GDP countries. The book highlights the need to improve asthma diagnosis, treatment and biomarkers, particularly in rural and low-income countries where the disease is often underdiagnosed and inadequately treated, and discusses the role of inflammation in asthma, in particular secondary inflammation characterized by specific cytokines and inflammation cells In addition, the paper explores various drug delivery methods, such as parenteral and parenteral drugs, pressurized inhalers (pMDIs), dry powder inhalers ( DPIs), nebulizers, nanoparticles, liposomes, micellar systems, microparticles , dendrimers, and gene therapy . These systems aim to increase pulmonary delivery of drugs and improve clinical outcomes. The potential of dendrimer bilirubin-based nanoparticles and micellar systems in the treatment of asthma and lung inflammatory diseases, including asthma, has been discussed in summary, this paper provides an overview of occupational asthma and respiratory hypersensitivity, and this discussion highlights the association between methacrylate exposure and respiratory hypersensitivity.

To accurately and non-destructively monitor the growth of spring wheat in the Hetao Irrigation Area, UAV remote sensing was employed during various fertility stages. Digital image indices from diverse fertilization treatments were calculated and compared with physiological indices to identify the most sensitive digital image indices corresponding to these indices. The study underscored the critical importance of the flowering stage in the growth of spring wheat, thus highlighting the necessity of focusing on this stage. This finding reiterated that the flowering stage was pivotal for spring wheat development in the Hetao Irrigation Area. Several digital image indices, such as GLA, R, G, INT, g, GRVI, MGRVI, RGBVI, EXG, and GRRI, exhibited a high frequency of significant correlations with physiological indices during the four primary reproductive stages of wheat. Consequently, these sensitive digital image indices during the flowering stage can more effectively characterize the physiological indices of spring wheat.

Nucleic acid delivery through extracellular vesicles (EVs) is a well-preserved evolutionary mechanism in all life kingdoms including eukaryotes, prokaryotes, and plants. EVs naturally allow horizontal transfer of native as well as exogenous functional mRNA, that once incorporated in EVs is protected from enzymatic degradation. The possible use of EVs as carriers for vaccine has been investigated showing that EVs expressing recombinant SARS-CoV-2 S protein induced an immune response. Moreover, EV-based vaccines presenting the natural configuration of viral antigens have advantages in conferring long lasting immunization and lower toxicity than synthetic nanoparticles. To overcome the manufacturing limitations of EVs derived from eukaryotic cells, edible plant-derived EVs have been studied as an attractive alternative for vaccine delivery, especially for mucosal administration. We recently showed that EVs obtained from orange juice (oEVs) loaded with SARS-CoV-2 mRNAs protected their cargo from enzymatic degradation and were stable at room temperature for one year. Lyophilized oEVs containing the S1 mRNA were administered to rats by gavage and they induced a specific humoral immune response with generation of blocking antibodies, including IgA, that are the first mucosal barrier in the adaptive immune response. Moreover, a Th1 cytokine secretion occurred, suggesting a specific lymphocyte activation. In conclusion, mRNA-containing oEVs could be used for developing new oral vaccines due to optimal mucosal absorption, resistance to stress conditions, and the ability to stimulate a humoral and cellular immune response.

The superficial quality of the strip is a very important issue in steel production; the profile, flat-ness, and geometry of strip are indicators of supreme quality. Considering the dimensions, the thickness is one of the most important variables in the production of strip. In the present study the elastic curve of Back Up Rolls (BUR) is analyzed, considering them as simply supported beams as well as the effect of rolls on the profile of the strip, specifically in the strip edge pro-ducing edge drop. The analysis is simulated with a model in 3D using a Finite Element Method (FEM) considering +0.039mm crown on Back Up Roll and +0.101mm crown on Work Roll (WR). The results showed that there is an instability zone of 76mm in the strip edge, this geometry is symmetrical in both ends of the strip, it was validated with the results of compact X-ray thick-ness gauge from a 4-high cold mill. This study not only provides a theoretical basis for the edge drop, but also provides the basis for the understanding of deformation on rolls used in rolling mill processes and their effect on the thickness, profile, shape, and dimensional quality of strips.

The reaction of 2-bromo-1-(5-methyl-1-(4-nitrophenyl)-1H-1,2,3-triazol-4-yl)ethan-1-one (1) with 4-amino-5-((2,4-dichlorophenoxy)methyl)-4H-1,2,4-triazole-3-thiol (2) in absolute ethanol in the presence of triethyl amine as catalyst gave 2-((4-amino-5-((2,4-dichlorophenoxy)methyl)-4H-1,2,4-triazol-3-yl)thio)-1-(5-methyl-1-(4-nitrophenyl)-1H-1,2,3-triazol-4-yl)ethan-1-one (3) in 73% yield. The structure of the title heterocycle (3) was confirmed by X-ray single crystal diffraction and spectral analyses (NMR and IR).

Objective: Obstructive sleep apnea syndrome (OSAS) is a common sleep disorder that is caused by the reduction or cessation of airflow in the upper airway. Irisin, retinol-binding protein-4 (RBP-4), and adiponectin are the three significant factors in the metabolic process of the human body. The objective of this study was to investigate whether plasma irisin, RBP-4, and adiponectin levels are associated with the severity of OSAS. Methods: According to inclusion and exclusion criteria, 125 patients with OSAS and 46 healthy, gender matched controls were included to the study. The patients were classified according to the apnea hypopnea index (AHI) as 14 mild cases (5<AHI<15), 23 moderate OSAS cases (15<AHI<30) and 88 severe OSAS cases (AHI>30). The plasma irisin, RBP-4 and adiponectin levels were measured and compared between groups. Results: RBP-4 levels were higher in severe OSAS compared to moderate (p<0.05) and mild (p<0.001) OSAS groups, irisin levels were significantly lower compared to moderate (p<0.05) and mild (p<0.001) OSAS groups. There was a negative correlation between irisin and RBP-4 (r=-0.379; p<0.001) and AHI (r=-0.834; p<0.001) and a positive correlation with minimum oxygen saturation (MOS) (r=0.341; p<0.001) in the patient group. In the patient group, there was a negative correlation between adiponectin and BMI (r=-0.682; p<0.001), RBP-4 (r=-0.292; p<0.01) and AHI (r=-0.179; p<0.05) and a positive correlation with MOS (r=0.397; p<0.001). In the patient group, there was a positive correlation between RBP-4 and BMI (r=0.406; p<0.001) and AHI (r=0.473; p<0.001) and a negative correlation with MOS (r=-0.805; p<0.001). As a predictor of OSAS, adiponectin showed the highest specificity (84.8%) and RBP-4 the highest sensitivity (92.0%). Conclusion: The results of the present study demonstrated that the severity of OSAS causes more metabolic problems, including decreased plasma irisin and adiponectin levels and an increased plasma RBP-4 level. As a result, patients with an AHI score greater than thirty should be closely monitored for metabolic and cardiovascular abnormalities.

Systemic sclerosis (SSc) is a multisystem connective tissue disease characterized by pathological processes involving autoimmunity, vasculopathy, and resultant extensive skin and organ fibrosis. Recent studies have demonstrated activation and aberrant wound healing responses in the epithelial layer of the skin in this disease, implicating the epithelial keratinocytes as a source of pro-fibrotic and inflammatory mediators. In this paper we investigated the role of Immunoglobulin G (IgG) autoantibodies directed against epithelial cells, as potential initiators and propagators of pathological keratocyte activation and the ensuing SSc fibrotic cascade. A keratinocyte cell-based ELISA is used to evaluation binding of SSc IgG. SSc skin biopsies were stained by immunofluorescence for the presence of IgG in the keratinocyte layer. Moreover, IgG purified from SSc sera is evaluated for the potential to activate keratinocytes in tissue culture and to induce signaling in TLR2 &amp; 3 reporter cell lines. We demonstrate enhanced binding of SSc IgG to keratinocytes, and activation of these cells leading to release of IL-1α, representing a potential initiating pathway in this disease.

Consumption is thus fundamentally related to sustainably because every decision pertaining to what to buy, what quantity the buy, how many to consume, or how to dispose of things has a direct influence on the natural world and the generations to come, and the overall impact of every single the customer's purchase is disastrous. A framework-based systematic literature review (SLR) was conducted to better comprehend the body of research on digital innovation and sustainability driving consumer behavior. This was done in order to acquire a deeper understanding of the studies that have already been done in this area. to provide (i) a comprehensive review of the current research landscape and (ii) a rich roadmap for future research. This study evaluated the literature especially in terms of theory, context, traits, and methodology. A total of 107 research articles published between 2013 and 2022 were found using scientific methods in the Scopus database. The findings showed that most research appears to have employed qualitative methodologies and was grounded in the setting of China and Italy. This review could help scholars better grasp the relationship between digital innovation and sustainability, opening the door for additional study and advancement in the field. Additionally, by extending the literature study and emphasizing the elements that can improve digital innovation and sustainability, practitioners will be given a better overall understanding of how to approach the problem.

Gram-negative bacterial infections pose a significant threat to public health. Toll-like receptor 4 (TLR4) recognizes bacterial lipopolysaccharide (LPS) and induces innate immune responses, autophagy and cell death, which have major impacts on the body physiological homeostasis. However, the role of TLR4 in bacterial LPS-induced autophagy and apoptosis in large mammals remains unknown, which are closer to humans than rodents in many physiological characteristics. So far, few reports focus on the relationship between TLR, autophagy and apoptosis in large mammal levels. We urgently need more tools to further explore their crosstalk. Here, we generated a TLR4-enriched mammal model (sheep) and found that a high-dose LPS treatment blocked autophagic degradation and caused strong innate immune responses and severe apoptosis in PBMCs of transgenic offspring. Excessive accumulation of autophagosomes/autolysosomes might contribute to LPS-induced apoptosis in PBMCs of transgenic animals. Further study demonstrated that inhibiting TLR4 downstream NF-κB or p38 MAPK signaling pathways reversed the LPS-induced autophagy activity and apoptosis. These results indicate that the elevated TLR4 aggravates LPS-induced PBMCs apoptosis by leading to lysosomal dysfunction and impaired autophagic flux, which is associated with TLR4 downstream NF-κB and MAPK signaling pathways. This study provides a novel TLR4-enriched mammal model to study its potential effects on autophagy activity, inflammation, oxidative stress and cell death. These findings also enriched the biological functions of TLR4 and provided powerful evidence for bacterial infection.

Erectile dysfunction (ED) is a common and feared complication of radical prostatectomy (RP) for prostate cancer. Recently, tissue engineering is being attempted for post-prostatectomy ED, with controlled interactions between cells, growth factors, and extracellular matrix (ECM) being important for nerve regeneration's structural integrity. In this study, we evaluated the effects of biomechanical ECM patch on human bone marrow-derived mesenchymal stem cells (hBMSCs) morphology and behavior in bilateral cavernous nerve injury (BCNI) rat model. The ECM patch, made of decellularized human fibroblast-derived ECM (hFDM) and a biocompatible polyvinyl alcohol (PVA) hydrogel, was tested with human bone marrow-derived mesenchymal stem cells (hBMSCs) on a bilateral cavernous nerve injury (BCNI) rat model. In vitro analysis showed that the hFDM/PVA + hBMSCs patches significantly increased neural development markers. In vivo experiments demonstrated that the rats treated with the hFDM/PVA patch had higher ICP/MAP ratio, a higher ratio of smooth muscle to collagen, increased content of nNOS, higher levels of eNOS protein expression, and a higher cGMP level compared to the BCNI group. These results indicate that the hFDM/PVA patch is effective in promoting angiogenesis, smooth muscle regeneration, and nitrergic nerve regeneration, which could contribute to improved erectile function in post-prostatectomy ED.

The report introduces hybrid polyelectrolyte-stabilized colloids combining blue and green emitting building blocks, that are citrate carbon dots (CDs) and [TbL]+ chelate complexes with 1,3-diketonate derivatives of calix[4]arene. The joint incorporation of green and blue emitting blocks into the polysodium polystyrenesulfonate (PSS) aggregates is carried out through the solvent-exchange synthetic technique. The coordinative binding between Tb3+ centers and CD surface groups in initial DMF solutions both facilitates joint incorporation of [TbL]+ complexes and the CDs into the PSS-based nanobeads and affects fluorescence properties of [TbL]+ complexes and CDs, as well as their ability to temperature sensing. The variation of the synthetic conditions is represented herein as a tool for tuning the fluorescent response of the blue and green emitting blocks upon heating and cooling. The revealed regularities enable developing either dual band luminescent colloids for monitoring temperature changes within 25-50 C through double color emission, or to transform the colloids into ratiometric temperature sensors via simple concentration variation of [TbL]+ and CDs in initial DMF solution. Novel hybrid carbon dots-terbium chelate PSS-based nanoplatform opens an avenue for new generation of sensitive and customizable single excited dual band nanothermometers.

Abstract. The purpose of this review is to investigate the nature of privacy concerns in the context of Smart Local Energy Systems (SLES) to understand how SLES providers can minimize both users’ concern, and cause for concern, around privacy. We conducted a rapid realist review and thematic framework analysis against Bronfrenbrenner’s socio-ecological model to understand privacy concerns in different contexts. A common privacy concern was that sharing detailed energy use data had the potential to reveal information about home life, and to intrude upon people’s sense of autonomy, choice and control. Evidence suggests that people are willing to accept newdata sharing technologies if the benefits of doing so are clear, anticipated, and mutually beneficial. Building trust, through increasing knowledge and understanding was a mechanism for overcoming privacy concerns, but this was mediated by the organization providing the information. Non-profit organizations were more trusted to ensure appropriate safeguards to privacy were in place. One key barrier to participation with good supporting evidence was that people can resist perceived intrusions on their privacy. This could be actively resisted by refusing to install data collection technologies or passively by non-participation in adapting energy use behaviors: both of which are necessary for SLES to achieve their goals of managing energy demand and building resilience in smart grids.

Western Anatolia comprises a vast amount of various volcanic successions spanning from Eocene to Upper Miocene periods. These units mainly display southward younging in broad sense and display large amounts of chemical variation that spanned from basalt to rhyolite. The southward younging of magmatism and chemical variations have been largely attributed to the retreat and roll-back of the Hellenic slab and the western escape of the Anatolian microplate. However, there is still a lack of high precision data to pinpoint the exact nature of the magmatism and lithospheric tectonics. In this contribution we investigated a poorly known region along the Western Anatolia along Manisa district called Karakılıçlı volcanic field. We investigated two different volcanic sections (Kalpakkaya and Çamlık hill) that display the best volcano-sedimentary features in terms of geochronology and geochemistry. Samples acquired from the bottom, middle and upper portions of these sections display Early-Middle Miocene ages of 17.64±0.20, 17.22±0.15, 16.16±0.17 and 16.36±0.13, 15.79±0.71 and 13.61±0.20 Ma respectively. The results indicate that the volcanism in the region generated by the melting of the mantle and/or lithospheric mantle by slab retreat and roll-back of the Hellenic slab and evolved in the shallow magma chambers/mushes by fractional crystallization, magma mixing and crustal assimilation.

Trigonella foenum is one of the oldest medicinal plants that grow in many parts of Iran with the diverse ecological situation. Employing this plant for treating diabetes and high cholesterol has a long history, because of some metabolites. Due to the habitat of fenugreek is a wide range of climatic conditions, it may have power to cope with climate variation. The main intention of this inquiry was to understand the effect of the environmental variables on this therapeutic plant features. It was also interesting for us to understand which environment variables are more impressive for enhancing of trigonelline and 4-hydroxy isoleucine content as the most important metabolites of this plant. For achieving this goal, environmental information and vegetal data were analyzed to discover the role of nature on the seed part of fenugreek life in 50 different regions of Iran. Canonical correspondence analysis (CCA) displayed that high content of metabolites and some morphological characteristics happened in high temperature and solar irradiation. Partial least squares regression (PLSR) and path analysis used to find the best predictors and direct and indirect effect of all variables on 4-hydroxy isoleucine and trigonelline. Ecological condition were the best predictors and had the highest direct and indirect impact on 4-hydroxy isoleucine. However, for trigonelline, the environment did not play a senior role. It seems that the reaction of components of fenugreek does not follow the same way. Studying on morphological, primary and secondary metabolites, and surrounding environment of fenugreek, helped us to have a more precise judgment about the life of this plant.

(RADA)4 nanoscaffolds are excellent candidates for use as peptide delivery vehicles: they are relatively easy to synthesize with custom bio-functionality, and assemble in situ to allow a focal point of release. This enables (RADA)4 to be utilized in multiple release strategies by embedding a variety of bioactive molecules in an all-in-one ‘construct’. One novel strategy focuses on the local, on-demand release of peptides triggered via proteolysis of tethered peptide sequences. However, the spatial-temporal morphology of self-assembling nanoscaffolds may greatly influence the ability for enzymes to both diffuse into as well as actively cleave substrates. Fine structure and its impact on overall affect on peptide release is poorly understood. In addition, fractal networks observed in nanoscaffolds are linked to the fractal nature of diffusion in these systems. Therefore, matrix morphology and fractal dimension of virgin (RADA)4 and mixtures of (RADA)4 and matrix metalloproteinase 2 (MMP-2) cleavable substrate modified (RADA)4 were characterized over time. Sites of high (GPQG+IASQ, CP1) and low (GPQG+PAGQ, CP2) cleavage activity were chosen. Fine structure was visualized using established according to established methods. After 2 hrs of incubation, nanofiber networks showed an established fractal nature, however nanofibers continued to bundle in all cases as incubation times increased. It was observed that despite extensive nanofiber bundling after 24 hrs of incubation time, the CP1 and CP2 nanoscaffolds were susceptible to MMP-2 cleavage. The properties of these engineered nanoscaffolds characterized herein illustrate that they are an excellent candidate as an enzymatically initiated peptide delivery platform.

Background: Colorectal cancer (CRC) remains a leading cause of cancer-related morbidity and mortality in both sexes globally. This is not unconnected with the heterogeneity and plasticity of CRC stem cells (CRC-SCs) which stealthily exploit niche-related and (epi)genetic factors to facilitate metastasis, chemoresistance, tumor recurrence, and disease progression. Despite accumulating evidence of the role of dysregulated microRNAs in malignancies, the therapeutic efficacy of pharmacological-targeting of CRC-SC-associated microRNAs is relatively under-explored. Experimental approach: In this present study, we employed relatively new bioinformatics approaches, analyses of microarray data, western blot, RT-PCR, and functional assays to show that hsa-miR-324-5p expression is significantly suppressed in CRC cells, and inversely correlates with the aberrant expression of SOD2. Results: This converse hsa-miR-324-5p/SOD2 relationship is associated with enhanced oncogenicity, which is effectively inhibited by 4-AAQB as evidenced by inhibited cell viability and proliferation, as well as, attenuated migration, invasion and clonogenicity in 4-AAQB-treated DLD1 and HCT116 cells. We also showed that 4-AAQB-induced re-expression of hsa-miR-324-5p, akin to short-interfering RNA reduced SOD2 expression, correlates with the concurrent down-regulation of SOD2, N-cadherin, vimentin, c-Myc, and BcL-xL2, with concomitant up-regulation of E-cadherin and BAX2 proteins. Enhanced expression of hsa-miR-324-5p in the CRC cells suppressed their tumorigenicity in vitro and in vivo. Additionally, 4-AAQB synergistically potentiates FOLFOX anticancer effect by eliciting the re-expression of SOD2-suppressed hsa-miR-324 and inhibiting SOD2-mediated tumorigenicity. Conclusion: Our findings highlight the pre-clinical anti-CSC efficacy of 4-AAQB, with or without FOLFOX in CRC, and suggest a potential novel therapeutic strategy for CRC patients.

Curcumin, a hydrophobic polyphenol compound derived from the rhizome of the Curcuma genus, has a wide spectrum of biological and pharmacological applications. Previously, curcumin nanoparticles with different stabilizers had been produced successfully in order to enhance solubility and per oral absorption. In the present study, we tested the anti-inflammatory effect of D-α-Tocopheryl polyethylene glycol 1000 succinate (TPGS)-stabilized curcumin nanoparticles in vivo. Lambda-carrageenan (λ-carrageenan) was used to induce inflammation in rats; it was given by an intraplantar route and intrapelurally through surgery in the pleurisy test. In the λ-carrageenan-induced edema model, TPGS-stabilized curcumin nanoparticles were given orally one hour before induction and at 0.5, 4.5, and 8.5 h after induction with two different doses (1.8 and 0.9 mg/kg body weight (BW)). Sodium diclofenac with a dose of 4.5 mg/kg BW was used as a standard drug. A physical mixture of curcumin-TPGS was also used as a comparison with a higher dose of 60 mg/kg BW. The anti-inflammatory effect was assessed on the edema in the carrageenan-induced paw edema model and by the volume of exudate as well as the number of leukocytes reduced in the pleurisy test. TPGS-stabilized curcumin nanoparticles with lower doses showed better anti-inflammatory effects, indicating the greater absorption capability through the gastrointestinal tract.

Three-dimensional (3D) geological modeling technology offers intricate geological information services and technical support for the research of urban geological conditions and their evolutionary mechanisms. It further facilitates the analysis of environmental geological problems, encompassing their distinguishing features and genetic mechanisms. The precision of such three-dimensional models is predominantly influenced by the caliber of modeling data, the chosen modeling methodologies, and the intricacy of the modeled geological objects. This research, exemplified by the three-dimensional geological structure modeling of the Wuhan metropolitan development area, aims to explore a comprehensive three-dimensional modeling framework for urban geology, particularly in scenarios with large-scale and complex geological conditions. This study holds significant technical value in enhancing the application of 3D geological modeling, as well as practical importance for urban geological investigations and research.

The superfamily of Acid proteases has two catalytic aspartates for proteolysis of their peptide substrates. Here, we show a minimal structural scaffold, the Structural Catalytic Core (SCC), which packs all conserved substructure elements around the catalytic machinery, and which can be found in all enzymes of the Acid proteases superfamily. The SCC is a dimer of several structural blocks, such as the DD-link, the D-loop and the G-loop, around two catalytic aspartates in each protease subunit or within an individual chain. The dimer of two D-loop/DD-link substructures makes a DD-zone, and the dimer of two D-loop/G-loop substructures makes a psi-loop. These structural markers are useful for protein comparison, structure identification, protein family separation and protein engineering.

The coseismic surface three-dimensional deformation fields were significant for quantified the geometric and kinematic characteristics of earthquake rupture faults. Traditional geodetic techniques were constrained by their intrinsic limitations, such as InSAR, which could only extract far-field deformation fields due to its incoherence, and GNSS, which could only acquire deformations at discrete points. The recently developing optical pixel correlation technique based on high resolution remote sensing images could acquire the near-field coseismic horizontal deformation. In this study, the vertical displacement field of the 2022 Mw 6.6 Menyuan earthquake was obtained by differencing the pre- and post-earthquake DEMs from GaoFen-7 stereo satellite images. Further, the line-of-sight (LOS) and azimuthal (AZI) directions far-field deformations by InSAR, the horizontal near-field deformation by optical pixel correlation based on pre- and post-earthquake GF-2/7 images, and the vertical deformation by differencing the pre- and post-earthquake DEMs, were incorporated to comprehensively solve the complete three-dimensional deformation fields of the 2022 Mw 6.6 Menyuan earthquake. Firstly, the vertical displacement field by differencing DEMs indicated there were significant vertical displacements about 1 m at the bend region, which was induced by the local compressive stress. In addition, at the epicenter on the middle segment of ruptured Lenglongling fault (LLLF), the maximum lifting occurred on the southern sides of the main and secondary faults exceeded 2 m. Secondly, the three-dimensional deformation fields solved by multiple deformation data demonstrated that the near-field deformation field calculated by optical pixel correlation method could quantify the displacements distributed over the rupture fault zone, which were not available on the InSAR deformation maps. Finally, the surface 2D strain derived from the displacement maps calculated by optical pixel correlation revealed high strain concentration on the rupture fault zone. Our study focused on the complete surface three-dimensional deformation estimation from multiple far- and near-field deformation data, and provided a new perspective for a deeper understanding of the characteristics of coseismic surface deformation and the rupture pattern of the fault.

Smart City has emerged as the mainstream paradigm for urban governance innovation, sustainable development, and strategy upgrades, which is drawing attention from scholars worldwide. However, current frameworks for Smart City assessment remain incomplete and simplistic. In is paper, 30 national or provincial capitals in China were selected and we designed a tri-dimensional SPI model—Social, Physical, and Information Space—for smart city spatial development assessment. Utilizing methods such as entropy weighting, coupled coordination degree models, and the Dagum Gini coefficient, this study assesses the spatial development and coupled coordination of 30 cities from 2011 to 2019. Finally, by means of BP neural networks, the study examines the contribution of each indicator to the spatial coupled coordination. The results indicated that with a narrowing disparity in development speeds among different regions, the spatial coupled coordination development level of smart capitals in China has steadily increased, presenting a pattern of staggered distribution. Moreover, the IS subsystem plays the most significant role in coupled coordination. The significance of this research lies in its tri-dimensional spatial perspective of the spatial development and coupled coordination differences of the Smart City, providing evidence-based support for the regional layout and optimization in China.

Multiple valued logic (MVL) has proven to be a better alternative and solution to the challenges of traditional binary logic because of its fast computation, fewer interconnects, and small die. It is a potential candidate for future digital design because it allows energy-efficient, low-complex, and high-speed circuits. This paper introduces a new resistive-load two-dimensional field effect transistor-based ternary logic gates, wherein the active resistive-load is replaced with memristor to reduce chip area and power consumption. A memristor-based standard ternary inverter (STI) is designed using GNRFET, MoS2 FET, WSe2 FET, and FinFET, and their performance metric such as delay, power, and energy delay product (EDP) are analyzed. The results show that the proposed design achieves 50% reduction in circuit area, the average power dissipation is reduced by 11.7X, 6.8X, and 3.2X for GNRFET, MoS2 FET, and WSe2 FET, respectively, as compared to FinFET-based ternary inverter. Moreso, other logic gates such as OR, NOR, AND and NAND were simulated in T-SPICE EDA tool, and the results and truth table are in good agreement.

There are two major proposed forms of dark energy: the cosmological constant and the quintessence scalar field. However, the former has the cosmological constant problem and the latter does not have observational evidence to support the theory. In this paper, we propose a dark energy paradigm to solve the cosmological constant problem and to predict lepton masses as evidence. The dark energy paradigm is a unified dark sector that is based on Planck's dimensional analysis, Lambda CDM, energy conservation, and force equilibrium. We find that dark energy can vary from the cosmological constant to the Planck scale. We find that the predicted values of lepton masses based on the dark energy paradigm agree with the observed values to 1% (or within error ranges).

Two-dimensional (2D) materials show advantages as surface enhanced Raman scattering (SERS) substrate over traditional noble metals, such as chemically inert flat surface and uniform SERS signals. However, due to the low density of free electrons of 2D materials, the enhancement mechanism is mainly restricted to chemical enhancement instead of electromagnetic enhancement, resulting a relatively low enhancement factor. In this work, we reported a sensitive 2D SERS substrate based on chemical vapor deposited MoN nanosheets with electromagnetic enhanced mechanism. The maximum enhancement factor can be 3×105 with a limit of detected concentration of 4×10-8 M, which is comparable to those noble metal SERS substrates without hot spots. The MoN nanosheets show strong surface plasmon resonance in the visible range as evidenced by the UV-vis absorption spectroscopy and first principle calculation. The MoN nanosheets SERS substrates exhibit excellent Raman signal uniformity within the nanosheets. Meanwhile, Distinct thickness dependent sensitivity was observed in the MoN nanosheets, higher sensitivity can be achieved by decreasing the thickness of the nanosheets. Furthermore, the MoN nanosheets SERS substrate also show high thermal stability, which can be annealed in air for more than 300℃ and maintain its SERS activity. The high stability of MoN nanosheets allows it to be reused for 20 cycles without obvious signal decay. The high sensitivity, stability, reusability and Raman signal uniformity, makes MoN nanosheets an ideal 2D SERS substrate for practical applications.

A mathematical model that comprehensively captures the real behavior of riverbed deformation, encompassing all pertinent effects, is developed. The underwater slope reformation process, with the generatrix aligned along the flow velocity in the model, is considered. A numerical model is introduced to calculate the flow involving a deformable bottom, and the model's validation is established through rigorous analysis of experimental findings. The research firmly confirms the suitability of the proposed mathematical and numerical model for describing deformations in uneven and unsteady river flows, including the movement of dredging slots and channel quarries. The model's minimal equation count and reliance on empirical constants demonstrate the model's efficiency. The model's predictions align strongly with experimental data, although optimal values of empirical coefficients vary slightly across different experiments. Hence, there is a call for further investigation to derive more universally applicable closure relationships for the model. The importance of validating the model with reliable field data and its potential extension to accommodate hydraulically diverse soils is emphasized. Such an extension is feasible due to the concentration transfer equation, enabling independent calculations for particle fractions of varying sizes as long as the total particle concentration in the stream remains within reasonable limits. This dedicated research contributes significantly to understanding riverbed deformations and advancing accurate modeling and management of riverine environments.

Polyamide 11 (PA11) is a plant-based nylon made from castor beans. Powder bed fusion laser sintering (PBF-LS) is an additive manufacturing process used for PA11 which allows the reuse of the unsintered powder. The unsintered powder is mixed with virgin powders at different refresh rates which has been studied extensively for most semi-crystalline polyamides. However, there is lack of information on the effect of using 100% reused PA11 powder and the number of times it is reused on its own during powder bed fusion laser sintering. This paper investigates the effect of reusing PA11 powder in PBF-LS and number of times it is reused on the dimensional accuracy, density, thermal and tensile properties. From 100% virgin powder to 3rd use of the powder, there is a decrease in powder wastage, decrease in crystallinity and tensile strength. These was associated with the polymerisation and cross-linking process of polymer chains, upon exposure to high temperature. This results in a higher molecular weight and hence density. From the 4th use to 10th reuse, the opposite was observed which was associated to an increase in high-viscosity and un-molten particles which resulted in defects in the PBF-LS parts.