Spectral image analysis has the potential to replace traditional approaches for assessing plant responses to different types of stress including herbicide, through non-destructive and high-throughput screening (HTS). Therefore, this study was conducted to develop a rapid bioassay method using a multi-well plate and spectral image analysis for diagnosis of herbicide activity and mode of action. Crabgrass (Digitaria ciliaris) as a model weed was cultivated in multi-well plates and subsequently treated with 6 herbicides with different modes of action when they reached the 1-leaf stage, using only a quarter of the recommended dose. To detect plant response to herbicides, plant spectral images were acquired after herbicide treatment using RGB, infrared (IR) thermal, and chlorophyll fluorescence (CF) sensors and analyzed for diagnosing herbicide efficacy and mode of action. Principal Component Analysis (PCA) using all spectral data successfully distinguished herbicides and clustered depending on their modes of action. The performed experiments have shown that the multi-well plate assay combined with spectral image analysis can be successfully applied for herbicide bioassay. In addition, the use of spectral image sensors, especially in CF image, would facilitate HTS by enabling rapid observation of herbicide response, as early as 3 hours after herbicide treatment.

Using two infectious DNA clones originating from isolates obtained in Kenya, a genetic investigation of maize streak virus (MSV) pathogenicity was carried out. The susceptible Pioneer hybrid 3379 was used to investigate the virulence of kernels administered through vascular puncture inoculation. Mild [pMSV-KL (mild)] and severe [pMSV-Km(severe)] parental infectious MSV DNA clones were linked with considerable changes in the severity of chlorotic streaks and stunting of seedlings. Using restriction endonuclease fragments, chimeric clones were created from parental clones in order to investigate the genetic elements influencing these changes. Restrictions mapping was used to validate clone identities. For genomic portions encoding the replication initiator (Rep and RepA), movement (MP), and coat (CP) protein ORFs as well as for those containing non-coding long (LIR) and short intergenic regions (SIR), putative virulence determinants were discovered. Recombinant clones with intermediate symptoms included LIRs together with the first 189 nt of the Rep/RepA ORFs from the pMSV-Km (Severe) and pMSV-KL (Mild) ORFs. Symptoms identical to those of parental clones were produced by complementary substitution of the Rep/RepA ORF. When compared to pMSV-Km (Severe), the recombinant clone having MP, CP, and SIR genome sequences from pMSV-KL(Mild) and LIR, Rep, and RepA genome sequences from pMSV-Km (Severe) displayed much more severe symptoms and accumulated greater concentrations. The reciprocal clone, in contrast, displayed much milder signs and virus titers than pMSV-KL(Mild). The level of leaf chlorosis and plant stunting were linked with viral accumulation. These findings are consistent with the idea that MSV virulence is a polymorphic feature involving complementary sense genes (LIR and SIR) and the virion.

Knowledge-based approaches are useful alternatives to predict the Failure Probability (FP) coping with the insufficient data, process integrity, and complexity issue in manufacturing systems. This study proposes a Fault Tree Analysis (FTA) approach as proactive knowledge-based technique to estimate the FP based maintenance planning with subjective information from domain experts. However, the classical-FTA still suffers from uncertainty and static structure limitations which poses a substantial dilemma in predicting FP. To deal with the uncertainty issues, a Fuzzy-FTA (FFTA) model was developed by statistical analysing the effective attributes such as experts' trait impacts, scales variation and, assorted membership and defuzzification functions. Besides, a Bayesian Network (BN) theory was conducted to overcome the static limitation of classical-FTA. The results of FFTA model revealed that the changes in decision attributes were not statistically significant on FP variation while BN model considering conditional rules to reflect the dynamic relationship between events had more impact on predicting FP. After all, the integrated FFTA-BN model was used in the optimization model to find the optimal maintenance intervals according to estimated FP and the total expected cost. As a practical example, the proposed model was implemented in a semi-automatic filling system in an automotive production line. The outcomes could be useful for upgrading the availability and safety of complex equipment in manufacturing systems.

The quantization error (QE) from Self-Organizing Map (SOM) output after learning is exploited in this studies. SOM learning is applied on time series of spatial contrast images with variable relative amount of white and dark pixel contents, as in monochromatic medical images or satellite images. It is proven that the QE from the SOM output after learning provides a reliable indicator of potentially critical changes in images across time. The QE increases linearly with the variability in spatial contrast contents of images across time when contrast intensity is kept constant. The hitherto unsuspected capacity of this metric to capture even the smallest changes in large bodies of image time series after using ultra-fast SOM learning is illustrated on examples from SOM learning studies on computer generated images, MRI image time series, and satellite image time series. Linear trend analysis of the changes in QE as a function of the time an image of a given series was taken gives proof of the statistical reliability of this metric as an indicator of local change. It is shown that the QE is correlated with significant clinical, demographic, and environmental data from the same reference time period during which test image series were recorded. The findings show that the QE from SOM, which is easily implemented and requires computation times no longer than a few minutes for a given image series of 20 to 25, is useful for a fast analysis of whole series of image data when the goal is to provide an instant statistical decision relative to change/no change between images.

This paper presents a new scientific contribution on the two-dimensional (2-D) subdomain technique in polar coordinates taking into account the finite relative permeability of the ferromagnetic material. The constant relative permeability corresponds to linear part of the nonlinear B(H) curve. As in conventional technique, the method of separation of variables and the Fourier’s series are used for the resolution of magnetostatic Maxwell’s equations in each region. Although, the general solutions of magnetic field in the subdomains and boundary conditions (BCs) between regions are different in the conventional and proposed method. In this later, the magnetic field solution in each subdomain is a superposition of two magnetic quantities in the two directions (i.e., r- and Q-axis) and the BCs between two regions are also in both directions. For example, the scientific contribution has been applied to an air- or iron-cored coil supplied by a constant current. The distribution of local quantities (i.e., the magnetic vector potential and flux density) has been validated by a corresponding 2-D finite-element analysis (FEA). The obtained semi-analytical results are in very good agreement with those of numerical method.

Cervical cancer is associated with persistent infections by high-risk HPV types that may have nucleotide polymorphisms and, consequently, different oncogenic potentials. Therefore, the objective of this study was to evaluate the genetic variability and structural effects of E7 oncogene of HPV58 in cervical scraping samples from Brazilian women. The study was carried out with patients from hospitals in metropolitan area of Recife, PE, Brazil. The most frequent HPV type was HPV16, 18 and 58, respectively. Phylogenetic analysis showed that the isolates were classified as sublineages A2, C1 and D2. Two positively selected mutations were found in E7: 63G and 64T. The mutations G41R, G63D and T64A in E7 protein were predicted to reduce the stability of the protein structure. Regarding the interaction of the E7 variant of HPV58 with the signaling of the NF-kB pathway, we observed that the variant HPV58/UFPE-54S decreased the activity of the pathway when compared to the prototype and the other variants behaved similarly to the prototype and the prototype increased the activity of the pathway when compared to pcDNA. In this study, it was possible to identify mutations that may interfere in the molecular interaction between the viral oncoproteins and host proteins.

Current acceleration in digital innovations, unexpected challenges in our social interactions, acceleration to virtualization, limitation in our physical spaces, and unpredictable changes in our Old lifestyles - as originated from the COVID-19 global pandemic 2020 - continue to provide us with a framework, rapidly updating under our eyes, of the modifications our world is undergoing by pursuing into a New “digital age”. Or, as many scholars say nowadays, into the New Normal! These are shared and deep changes that concretely stress their effects on how ideally a city should function. Forcing us to reflect on the capability to achieve shared choices and visions for the future by taking vantage from both the New digital platforms and New suddenly opened paths. In the pages of this article authors, through different but shared viewpoints, propose an answer to the topic of "Governance 3.0", addressing the attempt of a radical change of those paradigms, now consolidated, within which the spatial dimensions, in which we live and act, are shaped. Also analyzing the relationship between Technocracy and Democracy as defined by Khanna, it is argued that it is possible to realize new forecasts and acquire a more democratic and participatory (inclusive) dimension of Governance, also thanks to new digital technologies, by exploring the general unconscious "feeling" of people, through anonymous data collection and without any direct or indirect interference with it. The analysis of the "Sentiment", already developed in other fields but easily exportable within the urban discipline, can be considered as the beginning of hybrid practices where digital and analogic find a compromise to make the "Urbs" more attractive and inclusive, while the "Civitas", connected to the Internet, can contribute to the optimization of services, of the "Polis" and a new social/spatial reorganization.

Since the outbreak of COVID-19, social media platforms, such as Twitter, have experienced a tremendous increase in conversations related to Long COVID. The term “Long COVID” describes the persistence of symptoms of COVID-19 for several weeks or even months following the initial infection. Recent works in this field have focused on sentiment analysis of Tweets related to COVID-19 to unveil the multifaceted spectrum of emotions, viewpoints, and perspectives held by the Twitter community. However, most of these works did not focus on Long COVID, and the few works that focused on Long COVID have limitations. Furthermore, no prior work in this field has investigated Tweets where individuals self-reported experiencing Long COVID on Twitter. The work presented in this paper aims to address these research challenges by presenting multiple novel findings from a comprehensive analysis of a dataset comprising 1,244,051 Tweets about Long COVID, posted on Twitter between May 25, 2020, and January 31, 2023. First, the analysis shows that the average number of Tweets per month where individuals self-reported Long COVID on Twitter, has been considerably high in 2022 as compared to the average number of Tweets per month in 2021. Second, findings of sentiment analysis using VADER show that the percentage of Tweets with positive, negative, and neutral sentiment were 43.12%, 42.65%, and 14.22%, respectively. Third, the analysis of sentiments associated with these Tweets also shows that the emotion of sadness was expressed in most of these Tweets. It was followed by the emotions of fear, neutral, surprise, anger, joy, and disgust, respectively.

Leucobryum is a moss genus that exhibits various bioactivities. However, the identification of Leucobryum species with morphology alone remains difficult. Nowadays, chemical profile analysis provides additional tools for plant classification, especially in medicinal plants. This method uses chemical similarities to identify the differences among some plants, especially for the different varieties of the same species. The objective of this study was to obtain the chemical profiles and use chemometrics to identify selected Leucobryum species found in Thailand. Lipophilic extracts from 18 samples of five taxa were analyzed with TLC and HPLC. Cluster analysis and PCA were used to investigate the similarities of the chemical profiles. PERMANOVA was performed to determine the difference among taxa. The results showed that the TLC profile could separate only the genus of the sample, while HPLC chromatograms showed separation among the Leucobryum taxa and consistent patterns within the same species. In addition, the chemical profiles of Leucobryum species were separated at the species level in PCA. The PERMANOVA showed significantly different profiles among the species (P = 0.002). Therefore, this work illustrated the potential of chemometrics as supporting evidence for species delimitation in the moss genus Leucobryum.

Four-polarisation camera was used to map absorbance of olivine micro-grains before and after high temperature annealing (HTA). It is shown that HTA of olivine xenolith at above 1200∘C in O2 flow makes it magnetised. Different mode of operation of polariscope with polarisation control before and after the sample in transmission and reflection modes was used. The reflection type was assembled for non-transparent samples of olivine after HTA. Sample for optical observation in transmission was placed on an achromatic plastic quarter-wavelength waveplate as a sample holder. Inspection for sample’s birefringence (retardance) as well as absorbance can be made. A best fit of transmitted intensity or transmittance T (hence absorbance A=−log10T) becomes accessible by simple best-fit using only three orientations (from measured four orientations by the camera). When intensity of transmitted light at one of the orientations was very low due to cross-polarised condition (polariser-analyser arrangement), the three-points fit can be used. Three-point fit in transmission and reflection modes was validated for T(θ)=Amp×cos(2θ−2θshift)+offset, where amplitude Amp, offset offset and orientation azimuth θshift are extracted for each pixel via the best fit.

Mining and analysis of the Big Data of Twitter conversations have been of significant interest to the scientific community in the fields of healthcare, epidemiology, big data, data science, computer science, and their related areas, as can be seen from several works in the last few years that focused on sentiment analysis and other forms of text analysis of Tweets related to Ebola, E-Coli, Dengue, Human papillomavirus (HPV), Middle East Respiratory Syndrome (MERS), Measles, Zika virus, H1N1, influenza-like illness, swine flu, flu, Cholera, Listeriosis, cancer, Liver Disease, Inflammatory Bowel Disease, kidney disease, lupus, Parkinson's, Diphtheria, and West Nile virus. The recent outbreaks of COVID-19 and MPox have served as "catalysts" for Twitter usage related to seeking and sharing information, views, opinions, and sentiments involving both these viruses. While there have been a few works published in the last few months that focused on performing sentiment analysis of Tweets related to either COVID-19 or MPox, none of the prior works in this field thus far involved analysis of Tweets focusing on both COVID-19 and MPox at the same time. With an aim to address this research gap, a total of 61,862 Tweets that focused on Mpox and COVID-19 simultaneously, posted between May 7, 2022, to March 3, 2023, were studied to perform sentiment analysis and text analysis. The findings of this study are manifold. First, the results of sentiment analysis show that almost half the Tweets (the actual percentage is 46.88%) had a negative sentiment. It was followed by Tweets that had a positive sentiment (31.97%) and Tweets that had a neutral sentiment (21.14%). Second, this paper presents the top 50 hashtags that were used in these Tweets. Third, it presents the top 100 most frequently used words that are featured in these Tweets. The findings of text analysis show that some of the commonly used words involved directly referring to either or both viruses. In addition to this, the presence of words such as "Polio", "Biden", "Ukraine", "HIV", "climate", and "Ebola" in the list of the top 100 most frequent words indicate that topics of conversations on Twitter in the context of COVID-19 and MPox also included a high level of interest related to other viruses, President Biden, and Ukraine. Finally, a comprehensive comparative study that involves a comparison of this work with 49 prior works in this field is presented to uphold the scientific contributions and relevance of the same.

With the rapid development of smart phones, tablets and their operative systems, many positioning enabled sensors have been built into these devices. Users can now accurately fix their location according to the function of GPS receivers. For indoor environments, as in the case we are studying, WiFi based positioning is preferred to GPS due to the attenuation or obstruction of signals. This paper deals with the automatic classification of customers in a Sports Shop Center on the basis of their movements around the shop's premises. To achieve this goal, we start by collecting (x,y) coordinates from customers while they visit the store. Consequently, any costumer's path through the shop is formed by a list of coordinates, obtained with a frequency of one measurement per minute. Then, a guess about the full trajectory is constructed and a number of parameters about these trajectories is calculated before performing an Unsupervised Learning Clustering Process. As a result, we can identify several types of customers, and the dynamics of their behavior inside the shop. This information is of great value to the company, to be used both in the long term and also in short periods of time, monitoring the current state of the shop at any moment, identifying different types of situation appearing during restricted periods, or predicting customer flow conditions

The last series of Raven's standard progressive matrices (SPM-LS) test were studied with respect to its psychometric properties in a series of recent papers. In this paper, the SPM-LS dataset is analyzed with regularized latent class models (RLCM). For dichotomous item response data, an alternative estimation approach for RLCMs is proposed. For polytomous item responses, different alternatives for performing regularized latent class analysis are proposed. The usefulness of the proposed methods is demonstrated in a simulated data illustration and for the SPM-LS dataset. For the SPM-LS dataset, it turned out the regularized latent class model resulted in five partially ordered latent classes.

This study introduces the Dynamic Feedback-Driven Learning Optimization Framework (DFDLOF), an innovative machine learning-based approach to personalize educational pathways. DFDLOF leverages advanced algorithms for in-depth analysis of learner data, enabling the dynamic customization of educational content and methodologies. Its application in diverse online platforms, including Khan Academy and Coursera, underscores its adaptability and scalability. DFDLOF enhances learner engagement and outcomes by providing tailored learning experiences and real-time feedback. Key insights reveal its strengths in personalized education, particularly in dynamically adapting learning paths and the importance of real-time feedback. Challenges identified include integration complexities and data privacy concerns. Future research directions emphasize the need for longitudinal impact studies and broader demographic applications. This study contributes significantly to the evolving domain of adaptive learning technologies, demonstrating the transformative potential of machine learning in personalizing education.

Due to the highly nonlinear, multi-stage, and strongly time-varying marine lysozyme fermentation process, it is difficult to assure the stability and prediction accuracy of the traditional single global soft sensor model on a global scale. This study innovatively proposed a soft sensor model based on an improved seagull optimization algorithm (ISOA) combined with Gaussian process regression (GPR) weighted ensemble learning. First, the sample data set is divided into multiple local sample subsets by the improved density peak clustering algorithm (ADPC). Second, the Gaussian process regression model is optimally altered with an improved seagull optimization algorithm for the purpose of establishing the corresponding sub-prediction model. Finally, the prediction model's fusion strategy is ultimately determined depending on the degree of connection between the test samples and a subset of local pieces. Simulation results show that the proposed soft sensor model, which searches GPR based on ISOA and combines various sub-models, can predict the key biochemical parameters of the marine lysozyme fermentation process better with less prediction error under the condition of fewer training data, and it can be expanded to the soft sensor models of general nonlinear systems, according to simulation results.

Confidence in intermodal transport has not yet been defined. There are many different approaches to the concept of trust. However, the authors embedded them in the light of the challenges of sustainability, linking with the shift paradigm. The objective of the article is to indicate the directions and criteria for the implementation of the shift paradigm, inscribed in the idea of sustainable transport. The auxiliary objective is to predict which countries in a given year will have the TRUST status, i.e. implement the shift paradigm, and which will not implement it (DISTRESS). The article uses taxonometric techniques and built a model using General Discriminant Analysis. On their basis, the utility function was approximated, including the directions of implementation of the shift paradigm depending on the scale of the environmental load of transport. In the course of the research, an original and innovative econometric model was constructed, pointing to three variables, which had the greatest impact on trust. Thanks to the cognitive value of the model, it is possible to identify individuals who deserve the trust, i.e. it will implement the shift paradigm, with 93% probability. In the future, it is worth expanding the research by models for each country.

One of the key components of application performance monitoring (APM) software is 2 AI/ML empowered data analytics for predictions, anomaly detection, event correlations and root 3 cause analysis. Time series metrics, logs and traces are three pillars of observability and the valuable 4 source of information for IT operations. Accurate, scalable and robust time series forecasting and 5 anomaly detection are desirable capabilities of the analytics. Approaches based on neural networks 6 (NN) and deep learning gain increasing popularity due to their flexibility and ability to tackle complex 7 non-linear problems. However, some of the disadvantages of NN-based models for distributed cloud 8 applications mitigate expectations and require specific approaches. We demonstrate how NN-models 9 pretrained on a global time series database can be applied to customer specific data using transfer 10 learning. In general, NN-models adequately operate only on stationary time series. Application 11 to non-stationary time series requires multilayer data processing including hypothesis testing for 12 data categorization, category specific transformations into stationary data, forecasting and backward 13 transformations. We present the mathematical background of this approach and discuss experimental 14 results from the productized implementation in Wavefront by VMware (an APM software) while 15 monitoring real customer cloud environments.

Tracking the kinematics of human movement usually requires the use of equipment that constrains the user within a room (e.g., optical motion capture systems), or requires the use of a conspicuous body-worn measurement system (e.g., inertial measurement units (IMUs) attached to each body segment). This paper presents a novel Lie group constrained extended Kalman filter to estimate lower limb kinematics using IMU and inter-IMU distance measurements in a reduced sensor count configuration. The algorithm iterates through the prediction (kinematic equations), measurement (pelvis height assumption/inter-IMU distance measurements, zero velocity update for feet/ankles, flat-floor assumption for feet/ankles, and covariance limiter), and constraint update (formulation of hinged knee joints and ball-and-socket hip joints). The knee and hip joint angle root-mean-square errors in the sagittal plane for straight walking were 7.6±2.6∘ and 6.6±2.7∘, respectively, while the correlation coefficients were 0.95±0.03 and 0.87±0.16, respectively. Furthermore, experiments using simulated inter-IMU distance measurements show that performance improved substantially for dynamic movements, even at large noise levels (σ=0.2 m). However, further validation is recommended with actual distance measurement sensors, such as ultra-wideband ranging sensors.

The Doughnut Economy is a new approach for the inclusion of planetary boundaries and social foundation in the development of societies. The Sustainable Development Goals of the UN determine another view for development targets. The developed Sustainability Window approach provides a means for operationalisation and quantification of the Doughnut Economy. The developed method calculates minimum economic development to guarantee sustainable social development and maximum economic development not to exceed environmental sustainability. The developed method, ASA Doughnut, is illustrated with case data from Thailand. The sustainability Doughnut for Thailand has been calculated for both weak and strong sustainability criteria. It seems that strong sustainability is a too strict requirement regarding several environmental dimensions of development while the weak sustainability criteria are fulfilled. The developed method and tool is flexible and can be used for comparative analysis of different countries or regions, for dynamic analysis of sustainability development, for gap analysis of the required improvement of environmental or social efficiency, and analysis of degrowth possibilities. The selection of indicators for the analyses and their reliability is crucial for the validity of the results and usefulness in policy planning.

AbstractIntroduction: Increasing knowledge of obstetric danger signs (ODS) and encouraging birth preparedness and complication readiness (BPCR) practices are strategies to increase skilled maternal health service utilization in low-income countries. One of the methods to increase mothers' knowledge about ODS and promote BPCR practice is through health education intervention (HEI). However, the effect of context-specific community-based health education led by women's groups on these outcomes has not been comprehensively studied, and the existing evidence is inconclusive. Thus, we aimed to evaluate the effect of a context-specific community-based HEI led by women's groups on mothers' knowledge regarding ODS and BPCR practices in southern Ethiopia.Methods: An open-label, two-arm parallel group cluster-randomized controlled trial was conducted from January to August 2023 on pregnant women from 24 clusters (kebeles) (12 interventions and 12 controls) in the northern zone of the Sidama region. The Open Data Kit smartphone application was utilized to collect data. The intention-to-treat analysis was used to compare outcomes between groups. We fitted multi-level mixed-effects modified Poisson regression with robust standard error to account for between and within cluster effects. Results: One thousand and seventy pregnant women (540 in the intervention and 530 in the control clusters) responded to this study, making the overall response rate 95.02%. Excessive vaginal bleeding (94.3% in the interventional group vs. 88.7% in the control group) was the commonest ODS mentioned during childbirth. Overall, 68.7% of women in the intervention group and 36.2% of mothers in the control group had good knowledge of ODS (P-value < 0.001). Saving money and materials (97.1% in the interventional group vs. 92.7% in the control group) was the most frequently practiced BPCR plan. Overall, 64.3% of women in the intervention group and 38.9% of mothers in the control group practiced BPCR (P-value < 0.001). HEI significantly increased overall knowledge of ODS (adjusted risk ratio [ARR]: 1.71; 99% CI: 1.14-2.57) and improved overall BPCR practice (ARR: 1.55; 99% CI: 1.02-2.39). Conclusions: A community-based HEI led by women's groups improved mothers' knowledge regarding ODS and BPCR practices in a rural setting in southern Ethiopia. Interventions designed to increase women's knowledge of ODS and improve BPCR practice must implement context-specific, community-based HEI that aligns with World Health Organization recommendations. Trial registration: NCT05865873

As we know, the economy of science is to achieve optimal gains using scarce resources. Similarly, a problem where economies of the world are trying to resolve it is the issue of how to achieve an optimal economic contribution from limited tourism resources. According to the fact that global studies and statistics indicate that good governance is considered as the most important factor in developing countries and is considered as a strong governance of the development and as Information and Communication Technology (ICT) is effective in the interactions and economic and social exchanges of any society, it is the link between the tourism industry and the technology under the form of a robust tool and utilitarian in the tourism process called E-tourism can play a significant role. Therefore, the aim of this study was to investigate the effect of network Readiness Index and good governance on income from tourism industry. In this study, data and information about 14 selected countries were collected from Southwest Asia in the annual period of 2016-2011 in the form of panel data and the proposed model was used and estimated by the generalized torques system method. The estimated results of the model indicate that both hypotheses have a positive and significant impact on the amount of Network Readiness Index in the income of tourism industry, as well as the positive and significant effect of the index the amount of income from the tourism industry is confirmed, and their impact has been positive and significant, as well as exchange rate variables, revenue and commercial openness, also have a positive and significant effect on revenues of the tourism industry.

In the power plant industry, the turbine inlet temperature (TIT) plays a key role in the efficiency of the gas turbine and, therefore, the overall—in most cases combined—thermal power cycle efficiency. Gas turbine efficiency increases by increasing TIT. However, an increase of TIT would increase the turbine component temperature which can be critical (e.g., hot gas attack). Thermal barrier coatings (TBCs)—porous media coatings—can avoid this case and protect the surface of the turbine blade. This combination of TBC and film cooling produces a better cooling performance than conventional cooling processes. The effective thermal conductivity of this composite is highly important in design and other thermal/structural assessments. In this article, the effective thermal conductivity of a simplified model of TBC is evaluated. This work details a numerical study on the steady-state thermal response of two-phase porous media in two dimensions using personal finite element analysis (FEA) code. Specifically, the system response quantity (SRQ) under investigation is the dimensionless effective thermal conductivity of the domain. A thermally conductive matrix domain is modeled with a thermally conductive circular pore arranged in a uniform packing configuration. Both the pore size and the pore thermal conductivity are varied over a range of values to investigate the relative effects on the SRQ. In this investigation, an emphasis is placed on using code and solution verification techniques to evaluate the obtained results. The method of manufactured solutions (MMS) was used to perform code verification for the study, showing the FEA code to be second-order accurate. Solution verification was performed using the grid convergence index (GCI) approach with the global deviation uncertainty estimator on a series of five systematically refined meshes for each porosity and thermal conductivity model configuration. A comparison of the SRQs across all domain configurations is made, including uncertainty derived through the GCI analysis.

This study investigates the magnetization of Cobalt (Co) nanoparticles with two different crystal structures: a centered cubic (fcc) and an hexagonal close packed (hcp), under the magnetic field of the Earth. For that reason, the hysteresis loops of the two material samples are exported and compared with the corresponding value by experimental procedure in the laboratory under the Earth’s magnetization. For both samples, the nanoparticle number variation and the nearest neighbor distance effect, in the Co hysteresis loop are investigated, structural information that is useful for the sample preparation. For the simulations the Finite Element Method (FEM) was used, while experiments are conducted using a measurement set-up based on fluxgate magnetometers. From the simulation, it is proven that, for both samples, the nanoparticle number effect does not change the hysteresis loop. In contrast, when the distance between the nanoparticles increases, the magnetization obtains smaller value. This study aims to build a novel, simple and economical measurement arrangement enabling in situ magnetic measurements for ferromagnetic nano-material characterization. As the need for continuous knowledge of the condition and the phase of ferromagnetic nanoparticles that is crucial in many applications, like catalytic processes, this work aims to introduce an alternative approach that will add another dimension to conventional chemical reaction engineering this of the magnetic state of the material resolved in time and space and to contribute in the field of the monitoring and the early fault diagnosis of nanoparticle materials.

Cratylia argentea is a leguminous shrub with a great potential for livestock feeding in tropical areas. However, time consuming and labor-intensive methods of chemical analysis limits the understanding of its nutritive value. Near infrared spectroscopy (NIRS) is a low-cost technology that has been widely used in forage crops to fasten the assessment of its chemical composition. The objective of this study was to develop prediction models to assess crude protein (CP), neutral detergent fiber (NDF), acid detergent fiber (ADF) and dry matter (DM) of Cratylia based on NIRS and partial least square analysis. A total of 155 samples were harvested at different maturity levels and used for model development, whereas 107 were used for calibration and 48 for external validation. The cross-validation presented Root Mean Square Error of Prediction of 0.77, 2.56, 3.43, and 0.42; a Ratio of Performance to Deviation of 4.8, 4.0, 3.8, and 3.4; an R2 of 0.92, 0.92, 0.87, and 0.84 for CP, NDF, ADF, and DM, respectively. Based on the obtained results, we conclude the ability to predict chemical parameters of Cratylia with the current model was accurate. This way, livestock producers and researchers may use it to fasten the assessment of Cratylia’s nutritive value.

The apple leaf-curling midge, Dasineura mali Kieffer (Diptera: Cecidomyiidae), is an invasive pest of apple. To provide crucial information for its pest risk analysis, forecast and management, we investigated the effects of temperatures (5, 10, 15, 20 and 25°C) and daylengths (10, 11, 12, 13, 14 and 15 hrs) on its development and survival. The midge could not complete its development at 10°C or lower. After transferred from 20°C to 10°C, mature larvae could survive for about two months and develop to adults. Pupation and emergence rates were significantly higher at 20°C than at 10°C and 25°C. Daylength had no effect on these parameters. The low temperature threshold and thermal requirement to complete development from eggs to adults were 3.7°C and 627 degree-days, respectively. The midge had significantly lower thermal requirement for completion of its lifecycle at 20°C (614.5 degree-days) than at 15°C (650.1 degree-days) and 25°C (634.8 degree-days). The thermal model developed in this study provided accurate predictions of the number of D. mali generations and adult emergence time in each generation in different regions of New Zealand. We suggest that the model could be used to predict population dynamics of this pest in other parts of the world.

Blockchain technology has been gaining great interest from a variety of sectors including healthcare, supply chain, and cryptocurrencies. However, Blockchain suffers from its limited ability to scale (i.e. low throughput and high latency). Several solutions have been proposed to tackle this. In particular, sharding proved that it is one of the most promising solutions to Blockchain’s scalability issue. Sharding can be divided into two major categories: (1) Sharding-based Proof-of-Work (PoW) Blockchain protocols, and (2) Sharding-based Proof-of-Stake (PoS) Blockchain protocols. The two categories achieve good performances (i.e. good throughput with a reasonable latency), but raise security issues. This article focuses on the second category. In this paper, we start by introducing the key components of sharding-based PoS Blockchain protocols. Then, we briefly introduce two consensus mechanisms, namely PoS and practical Byzantine Fault Tolerance (pBFT), and discuss their use and limitations in the context of sharding-based Blockchain protocols. Next, we provide a probabilistic model to analyze the security of these protocols. More specifically, we compute the probability of committing a faulty block and measure the security by computing the number of years to fail. Finally, we evaluate the effectiveness of the proposed model via numerical analysis.

This work aims to produce a cartographic model that identifies areas with a greater probability of finding karstic caves - the endokarst potential - in the northern sector of Santo António Plateau (Estremadura Limestone Massif, Central Portugal). Geological, topographic, hydrogeological, and vegetation cover data were collected, processed, and integrated into a spatial database using a geographic information system (GIS). The location of known cave entrances in the study area was also identified from the records of local public institutions and speleological teams. Four conditioning factors were extracted from the collected data, including lithostratigraphic units, fracture density, relief energy, and land cover. In a multi-criteria decision-making analysis framework, each previously chosen conditioning factor and respective classes/categories were weighted using the analytic hierarchy process (AHP). With an agreement of 81.9%, the results of the cartographic model constructed in GIS seem to be promising, considering that the entrances of the known caves are mainly located in areas classified as having high to very high endokarst potential. This prototype of the endokarst potential map for the study area can be used in strategic and operational environmental planning (at least on a local scale), as it can assist decision-makers, competent authorities, and local speleological teams in a more accurate and thoughtful definition of the areas that should be investigated, providing a substantial reduction in times and costs field prospecting.

Expansins (EXPs) which are the essential components of plant cell wall function as relaxation factors to directly promote turgor-driven expansion of cell wall and control plant growth and development and diverse environmental stress responses. A lot of EXPs genes have been widely identified and characterized in numerous plant species, but not in sweetpotato. In the present study, a total of 59 EXPs genes that unevenly distributed onto 14 of 15 chromosomes were identified from sweetpotato genome, and segmental and tandem duplications were exhibited to act as dominant functions in IbEXPs diversity. Phylogenetic analysis exhibited that IbEXPs members were clustered into four subfamilies according to EXPs in Arabidopsis and rice and the regularity of motif, domain and gene structures was in accordance with the subfamily classification. The collinearity analysis between IbEXPs and related homologous sequences in 9 plants provided the phylogenetic insights of EXPs gene family. Cis-element analysis futhrer revealed the potential roles of IbEXPs in sweetpotato development and stress responses. Evidence from RNA-seq and qRT-PCR analysis of eight selected IbEXPs genes displayed their various tissue specificity in different tissues, and their transcripts were varyingly induced or suppressed under multiple hormone treatments (ABA, SA, JA and ACC) and abiotic stresses (low and high temperature). These results supply worthy foundations to further comprehensively investigate the exact functions of IbEXPs genes, and multiple members may function as promising regulators to control plant development and enhance the stress resistance of transgenic plants.

The antibody Trastuzumab (Tz) targeting ERBB2 has improved the prognosis of patients with breast cancer (BCa) that overexpress this receptor. Resistance to Tz negatively impacts prognosis. Several mechanisms have been reported to cause Tz resistance. The objective of this study was to identify common mechanisms in in vitro models of acquired BCa Tz resistance. In particular, we used three widely available ERBB2+ BCa cell lines adapted to grow in Tz. We performed several analyses to address possible changes in phenotype, proliferation, and ERBB2 membrane expres-sion common to the three Tz-R cell lines compared to wt, but none was found. High-resolution mass spectrometry analysis identified, instead, a common set of differentially expressed proteins (DEPs) in Tz-R vs. wt cells. Furthermore, bioinformatic tools revealed that all three Tz-R cell models shared a modulation of proteins involved in the metabolism of lipids, organophosphate biosynthetic process, and macromolecule methylation. Ultrastructural analysis confirmed altera-tion of lipid droplets in resistant cells. Our data strongly support the hypothesis that complex metabolic adaptation, including lipid metabolism, protein phosphorylation, and possibly chro-matin remodeling, may fuel Tz resistance. The identification of a common set of 10 DEPs in all three TZ-resistant cell lines may provide novel targets for therapeutic intervention.

Fiber optic sensors cannot measure damage; for getting information about damage from strain measurements, additional strategies are needed, and several alternatives have been proposed. This paper discuss two independent concepts: the first one is based on detecting the new strains appearing around a damage spot; the structure does not need to be under loads; the technique is very robust, damage detectability is high, but it requires sensors to be located very close to the damage, so it is a local technique. The second approach offers a wider coverage of the structure, it is based on identifying the changes caused by the damage on the strains field in the whole structure for similar external loads. Damage location does not need to be known a priori, detectability is dependent upon the sensors network density, damage size and the external loads. Examples of application to real structures are given.

In current study, the production of microparticles from fifteen commercial sugarcane pulp (SCP) lunch-boxes into different types of food under different conditions was investigated, where we used DI water, 4% HAc, and 95% EtOH to simulate aqueous, acidic, and fatty foods. Results showed that compared with DI water and 95% EtOH, 4% HAc caused the degradation of sugarcane fibers, resulting in the highest number of microparticles released, which was significantly greater than the specified limit value. It was estimated that consumers might intake a total number of 36,400 ~ 231,700 items per meal per lunch-box, of which the proportion of microparticles with particle size between 100 ~ 500 μm was the largest, with a number of 12,376 ~ 130,795 items. Moreover, of all SCP lunch-box except S-11, Al and Fe are the main metals, ranging between 35.16 ~ 1244.04 and 44.71 ~ 398.52 mg/kg, respectively, followed by Pb, Ti, and Sr. Interestingly, unlike other lunch-boxes, the content of Pb in S-11 was the highest, with a number of 136 mg/kg. This study provides important information that the safeness including both the production of microparticles and the metallic elements should be considered for SCP lunch-boxes when in contact with food.

Superscaling in electron scattering from nuclei is re-examined paying special attention to the definition of the averaged single-nucleon responses. The validity of the extrapolation of nucleon responses in the Fermi gas has been examined, which previously lacked a theoretical foundation. To address this issue, we introduce new averaged responses with a momentum distribution smeared around the Fermi surface, allowing for momenta above the Fermi momentum. This approach solves the problem of negativity in the extrapolation away from the scaling region and, at the same time, validates its use in the scaling analysis. This work has important implications for the interpretation of scaling data and contributes to the development of a more complete understanding of the scaling approach.

The rapid industrial growth in solar energy is gaining increasing interest in renewable power from smart grids and plants. Anomaly detection in photovoltaic (PV) systems is a demanding task. In this sense, it is vital to utilize recent advances in machine learning to accurately and timely detect different anomalies and condition monitoring. This paper addresses this issue by evaluating different machine learning techniques and schemes and showing how to apply these approaches to solve anomaly detection and detect faults on photovoltaic components. For this, we apply distinct state-of-the-art machine learning techniques (AutoEncoder Long Short-Term Memory (AE-LSTM), Facebook-Prophet, and Isolation Forest) to detect faults/anomalies and evaluate their performance. These models shall identify the PV system's healthy and abnormal actual behaviors. Our results provide clear insights to make an informed decision, especially with experimental trade-offs for such complex solution space.

The metro station ridership features are associated significantly with the built environment factors of the pedestrian catchment area surrounding metro stations. The existing studies have focused on the impact on total ridership at metro stations, ignoring the impact on varying patterns of metro station ridership. Therefore, the reasonable identification of metro station categories and built environment factors affecting the varying patterns of ridership in different categories of stations is very important for metro construction. In this study, we developed a data-driven framework to examine the relationship between varying patterns of metro station ridership and built environment factors in these areas. By leveraging smart card data, we extracted the dynamic characteristics of ridership and utilized hierarchical clustering and K-means clustering to identify diverse patterns of metro station ridership, and finally identified six main ridership patterns. We then developed a new built environment measurement framework and adopted multinomial logistic regression analysis to explore the association between ridership patterns and built environment factors. (1) The clustering analysis result revealed that six station types were classified based on varying patterns of passenger flow, representing distinct functional characteristics. (2) The regression analysis indicated that diversity, density, and location factors were significantly associated with most station function types, while destination accessibility was only positively associated with employment-oriented type station, and centrality was only associated with employment-oriented hybrid type station. These results could inform the coordinated development of rail transit and land use, and the renewal and enhancement of the built environment in the pedestrian catchment area surrounding metro stations.

Objectives: The present study was conducted to evaluate the indicators of the aging-friendly using GIS software in the eight districts of Ahwaz, southwest Iran in 2022. Materials and methods: this descriptive-analytical study was conducted on 317 older adults by stratified random sampling method. Data collection tools were demographic characteristics and aging-friendly city indicators. GIS methods were used for the spatial analysis and SPSS version 28 software was used to analyze descriptive statistics. Results: The mean age of the participants was 66.21±6.99 years. Most of the participants in this study were male (53.9%), illiterate (34.7%), married (84.9%) and residents of district 7 (22.1%). The findings of the present study showed that all 8 districts follow spatial autocorrelation and cluster pattern in all components of the aging-friendly city (urban open spaces, intra-urban transportation system, public and religious places and buildings, safety and ease of traffic, social participation and communication, social respect, culture-recreation, health and treatment). Conclusion: According to the results, the city of Ahwaz is far from the ideal level among the components of an aging-friendly city; therefore, provincial and city officials should pay more attention to these indicators and take more effective steps to increase their quality.

The 1,2,3-triazole derivative 2-(4-chlorophenyl)-5-(pyrrolidin-1-yl)-2H-1,2,3-triazole-4-carboxylic acid with potential anticancer activity was used as a ligand in complex formation with the lan-thanum(III) ion. The molecular structure and vibrational spectra of the complex were optimized at three DFT levels and the scaled IR and Raman spectra were compared to the experimental ones. Several scaling procedures were used. Through a detailed analysis, the structure predicted for the newly synthetized La(III) complex was confirmed by the good accordance of the calculat-ed-experimental IR and Raman spectra. The best DFT method appears to be M06-2X with the Lanl2mb basis set, followed closely by Lanl2dz. The effect of the lanthanide atom on the molecular structure and atomic charge distribution of the triazole ring was evaluated. Potential free radical scavenging activity of both, ligand and complex, was investigated in several radical-generating model systems. Potential mechanisms of antioxidant action (hydrogen atom transfer – HAT and single electron transfer - SET) were elucidated.

Transmembrane carriers of the Slc11 family catalyze proton (H+)-dependent uptake of divalent metal-ions (Me2+) such as manganese and iron - vital elements coveted during infection. Slc11 mechanism of high affinity Me2+ cell import is selective and conserved between prokaryotic (MntH) and eukaryotic (Nramp) homologs, though processes coupling the use of the proton motive force to Me2+ uptake evolved repeatedly. Adding bacterial piracy of Nramp genes spread in distinct environmental niches suggests selective gain of function that may benefit opportunistic pathogens. To better understand Slc11 evolution Alphafold (AF2)/Colabfold (CF) 3D predictions for bacterial sequences from sister clades of eukaryotic descent (MCb and MCg) were compared using both native and mutant templates. AF2/CF model an array of native MCb intermediates spanning the transition from outward open (OO) to inward open (IO) carrier. In silico mutagenesis targeting i) a set of (evolutionary coupled) sites that may define Slc11 function (putative synapomorphy), and ii) residues from networked communities evolving during MCb transition, indicate Slc11 synapomorphy primarily instructs Me2+-selective conformation switch which unlocks carrier inner gate, and contributes to Me2+ binding site occlusion and outer gate locking. Inner gate opening apparently proceeds from interaction between transmembrane helix (h) h5, h8 and h1a. MCg1 xenologs revealed marked differences in carrier shape and plasticity, owing partly to altered intramolecular H+-network. Yet, targeting Slc11 synapomorphy also converted MCg1 IO models to OO state, apparently mobilizing the same residues to control gates. But MCg1 response to mutagenesis differed, extensive divergence within this clade correlating with MCb-like modeling properties. Notably, MCg1 divergent epistasis marks emergence of the genus Bordetella-Achromobacter. Slc11 synapomorphy localizes to the 3D areas that deviate least among MCb and MCg1 models (either IO or OO) implying it constitutes a 3D network of residues articulating Me2+-selective carrier conformation switch which is maintained in fast evolving clades at the cost of divergent epistatic interactions impacting carrier shape and dynamics.

Residual stresses in fiber metal laminates (FML) inevitably develop during the manufacturing process. The main contributor to these stresses is the difference in the coefficients of thermal expansion (CTE) between fibers and metal in combination with high process temperatures. To quantify these stresses, the use of specimens with an asymmetric layup is an easily adaptable method. The curvature that develops after the manufacturing of flat laminates with an asymmetrical layer stack is a measure of the level of residual stresses evolving during cure. However, the accuracy of the curvature evaluation is highly dependent on specimen design and other influencing parameters. In this work a large set of FML specimens is investigated to identify relevant influencing parameters and derive conclusions about specimen design and evaluation techniques. For certain layups and process parameters, there is a good correlation between the curvature and the stress-free temperature, which is further covered by analytical solutions for bimetals. This correlation is the basis to transfer curvature into a stress-free temperature that can consequently be used for the quantification of residual stress levels in more complex FMLs. The transfer is validated by in-situ strain measurements during cure using a strain gage technique. Based on the results, the application of asymmetric specimens for residual stress characterization in more complex laminates is presented in the form of a workflow.

This literature review aims to gain a deeper understanding of the anatomy behind the jaw strength of Tyrannosaurus rex and analyze how these features contribute to its predatory behavior. This review will examine various studies and fossil excavations, exploring ideas such as the bite force of T. rex and its variations across different life stages. This will be obtained from numerous biomechanical models of both juvenile and adult Tyrannosaurus rex, as well as reference animals and dinosaurs for comparison. To provide additional information behind T. rex’s hunting techniques, we will also discuss the fauna of herbivorous dinosaurs that were part of T. rex’s diet. Furthermore, we will explore how mandibular stress concentration can vary between ages, a crucial topic in determining what T. rex could consume at certain stages of its life. Finally, we obtain a well-evidenced analysis of the various aspects of Tyrannosaurus rex’s hunting strategies throughout its lifetime.

Marine finfish landings in Cuba have decreased during the last 30 years. However, in Cuba's most productive fishing region, certain species, including rays, herrings, and snappers, have increased landings over the past decade. Despite these anomalies, no comprehensive analysis of the interactions between multispecies landing dynamics, environmental factors, and fishing effort has been carried out. This study estimates the dynamics of multispecies finfish landings between 1981 and 2017 on the southeastern coast of Cuba. Dynamic factor analyses (DFA) were performed to identify common landing trends across multiple species and their relationship with fishing effort and environmental variables. During the period analyzed, finfish landings and fishing effort decreased by 46% and over 80%, respectively. Despite concerns about overfishing, landings per unit of effort (LPUE) increased by 2.8 times, suggesting the decline in landings was closely linked to decreasing fishing effort and Atlantic Multidecadal Oscillation cycles, with delays of 2 and 3 years. The study highlights the changing relationship between landings and fishing effort, suggesting that LPUE may not accurately reflect true stock abundance. The findings of this study will assist in integrating the dynamics of finfish species, ecosystem status, and management actions for Cuba’s most productive fishing zone.

The practice of nurse health coaching (NHC) draws from the art and science of nursing, behavioral sciences, and evidence-based health coaching methods. This secondary analysis of the audio-recorded natural language of participants during NHC sessions of our recent 8-week RCT evaluates improvement over time in cognitive-behavioral outcomes: Change Talk, Resiliency, Self-Efficacy/Independent Agency, Insight & Pattern Recognition, and Building Towards Sustainability. We developed a measurement tool for coding, Indicators of Health Behavior Change (IHBC), that was designed to allow trained health coach experts to assess the presence and frequency of the indicators in the natural language content of participants. We used a two-step method for randomly selecting the 20-minute audio-recorded session that was analyzed at each time point. Fifty-six participants had high-quality audio recordings of the NHC sessions. Twelve participants were placed in the social determinants of health (SDH) group based on the following: low income (<$20,000/year), early-onset hypertension, and social disadvantages. Our analyses significantly improved Change Talk and the other four factors over time. Our factor analyses indicated two distinct factors at each measurement point of the study, demonstrating the stability of the outcome measures over time. Our newly developed measurement tool, IHBC, proved stable in structure over time and sensitive to change. This NHC program shows promise in improving cognitive-behavioral indicators associated with health behavior change in both non-SDH and SDH individuals.

The connection of two phenomena - non-conservative friction forces and dissipation-induced instability can lead to many interesting engineering problems. The paper studies general material-dependent damping influence on dynamical instability of disc brake systems leading to brake squeal. The effect of general damping is demonstrated on a minimal and complex model of a disc brake. A complex system including material-dependent damping is defined in the commercial finite element software. The finite element model validated by experimental data on the brake-disc test bench is used to compute the influence of a pad and a disc damping variations on system stability by complex eigenvalue analysis. Analyzes show a significant sensitivity of the experimentally verified unstable mode of the system to the ratio of the damping between the disc and the friction material components.

Based on the topology of wide area protection system (WAPS), after studying the reliability of hardware system and information flow in the WAPS and establishing the reliability assessment model, the multi-service reliability analysis method with multi monitoring and protection tasks in WAPS was proposed. In the model, the impact of network quality of service (QoS) such as information flow loss and delay, is studied. On the base of the model, the multi-service reliability evaluation method is employed to analyze the reliability of a WAPS of IEEE14 node power system, and the key nodes of the WAPS is given, which provides a basis for improving the reliability of the WAPS.

The pace of implementation of renewable electricity storage in Europe is disappointingly slow. Several factors influence it, but there is a need to speed up the rate and increase the volumes in order to promote a 100% transition to renewable energy resources, expand the practice of using renewable energy, and contribute to the improvement of the user's quality of life. Also, an important factor is significantly reducing the global impact on the environment and climate change. Electricity from renewable energy sources such as solar and wind has a seasonal nature that cannot provide the necessary electricity consumption and cover peak loads. Also, the so-called "energy resource crisis" is a very topical problem at the moment, which reinforces the global need to increase the share of renewable energy resources in the overall balance of primary energy resources. It is precisely the wider integration of renewable electricity storage in practice that can help stimulate this. The availability of renewable electricity is constantly increasing and the level of technological innovation is rapidly developing, therefore it is valuable to analyze, look for connections and at the same time the main differences in the ways of accumulation in order to promote its availability from a private house to the national and European scale as a whole. Therefore, this article analyses and compares the different options for renewable electricity storage, from small batteries to large storage systems, arriving at the best solution according to needs, using analysis methods such as multicriteria decision analysis (MCDA) and TOPSIS. After comparing nine criteria, such as the amount of investment required, existing power density, efficiency, duration of operation and others, in both groups, it was concluded that lithium-ion batteries are currently the best solution among batteries, while in the group of large accumulation systems – pumped hydro storage.

Wicked problems, such as climate change, systemic poverty, and healthcare inequalities, rep- resent the most pressing and intractable challenges facing society today. We propose a novel approach that leverages complex systems theory as a comprehensive framework for understanding and tackling these challenges. By applying concepts such as state space analysis, attractors, and nonlinear dynamics, we offer a sophisticated toolkit for mapping the intricate web of interactions defining wicked problems and exploring potential interventions. Our approach moves beyond tradi- tional reductionist methods, embracing the inherent complexity and dynamism of these issues. We demonstrate how this framework can lead to more nuanced, adaptive, and effective strategies for addressing persistent societal problems. Despite the prevalence of wicked problems and the avail- ability of complex systems theory, practical applications of this approach remain uncommon. This paper aims to bridge this gap, illustrating the potential of complex systems theory to transform our engagement with intractable problems and pave the way for more robust, holistic solutions. By synthesizing insights from mathematics, physics, and social sciences, we present a transdisci- plinary approach that promises to revolutionize how we conceptualize and address society’s most challenging issues.

Cycas (family Cycadaceae), spread throughout tropical and subtropical regions, is crucial in con-servation biology. Due to the subtle morphological variations between species, a solid spe-cies-level phylogeny for Cycas is lacking. Because of the rapid progress in high-throughput se-quencing technology, it has become feasible to acquire complete chloroplast (cp) genome se-quences, which provide a molecular foundation for phylogenetic research. In the present study, we employed next-generation sequencing technology to assemble and analyze the chloroplast genomes of six Cycas plants, including their genome structure, GC content, and nucleotide di-versity. The Cycas chloroplast genome spans 162,038 to 162,159 bp and contains 131 genes, in-cluding 86 protein-coding genes, 37 transfer RNA (tRNA) genes, and 8 ribosomal RNA (rRNA) genes. Through a comparative analysis, we found that the chloroplast genome of Cycas was highly conserved, as indicated by the contraction and expansion of the inverted repeat (IR) re-gions and sequence polymorphisms. In addition, several non-coding sites (psbK-psbI, petN-psbM, trnE-UUC-psbD, ndhC-trnM-CAU, and rpl32-trnP-GGG) showed significant varia-tion. The utilization of phylogenetic analysis relying on protein-coding genes has substantiated the division of Cycas primarily into four groups. The application of these findings will prove valuable in evaluating genetic diversity and the phylogenetic connections among closely related species. Moreover, it will provide essential support for the advancement of wild germplasm re-sources.

This study explores the optimization of the admission process at the Escuela Colombiana de Ingeniería Julio Garavito through data anal- ysis. By integrating advanced tools like Power BI, Python Flask, and data mining techniques, a model has been developed to improve student selection and retention, enabling more informed and effective decisions. The results indicate that applying data science not only facilitates efficient data management but also promotes more inclusive and equitable educational poli- cies. This pioneering approach in the field of higher education in Colombia offers a frame- work for future research and technological de- velopments, highlighting the vital importance of data science in improving educational and administrative processes.

Expression analysis of small noncoding RNA (sRNA), including microRNA, piwi-interacting RNA, small rRNA-derived RNA, and tRNA-derived small RNA, is a novel and quickly developing field. Despite a range of proposed approaches, selecting and adapting a particular pipeline for transcriptomic analysis of sRNA remains a challenge. This paper focuses on the identification of the optimal pipeline configurations for each step of human sRNA analysis, including reads trimming, filtering, mapping, transcript abundance quantification and differential expression analysis. Based on our study, we suggest the following parameters for analysis of human sRNA in relation to categorical analyses with two groups of biosamples: (1) trimming with the lower length bound = 15 and the upper length bound = \(Read\ length - 40\% Adapter\ length\); (2) mapping on a reference genome with bowtie aligner with one mismatch allowed (-v 1 parameter); (3) filtering by mean threshold > 5; and (4) analyzing differential expression with DESeq2 with adjusted p-value < 0.05 or limma with p-value < 0.05 if there is very little signal and few transcripts.

Plant secondary metabolites are organic compounds (alkaloids, flavonoids, phenolics, tannins, anthraquinones, saponins, steroids, lignins, terpenes) produced by plant for self-defense during growth and development in order to protect them from harmful agents. As population is increasing and quality of life is reducing couple with outbreak of some diseases that are posing threat on the economy, a lot of medicinal plants have attracted interest of researchers because of the usefulness of these metabolites in pharmaceuticals, food and cosmetic industries. In this review, the pharmacological activities of some medicinal plants that are rich in secondary metabolites were studied, means of identifying and quantifying using spectrophotometry and chromatography techniques were also discussed. However, this will assist to reduce the uses and dependent on the synthetic drug and the onset of the age related diseases.

Introduction: Cholelithiasis and consumption of alcohol are the most frequent causes of acute pancreatitis (AP), accounting for about 30 to 40% of the cases, respectively. The frequency of acute biliary pancreatitis is high in a certain population in Brazil. Objective: To estimate the global frequencies of acute biliary pancreatitis (ABP), acute alcoholic pancreatitis (AAP) and the cases considered as acute idiopathic pancreatitis (AIP) in studies published from October 2006 to December 31, 2018. Methods: A systematic review of observational studies was performed from October 2006 to December 31, 2018. A meta-analysis by the random effects model was used to calculate the frequencies of global ABP, AIP and AAP and subgroups. Results: Forty-six studies representing 2,341,007 AP cases were included in 36 countries. The overall estimate for acute biliary pancreatitis (ABP) was 41.6% (95% CI 39.2-44.1), followed by acute alcoholic pancreatitis (AAP) with 20.5% (95% CI) 16.6- 24.6) and acute idiopathic pancreatitis (AIP) in 18.3% (95% CI 15.1-27.7). Conclusion: ABP is the most prevalent etiology of AP, being two times more frequent than second-placed pancreatitis. Latin America has a frequency for ABP much higher than the rest of the world. The importance of the etiologic diagnosis is the treatment of the cause for prevention of recurrence.

Thermal analysis is widely employed for the characterization of nanomaterials. It encompasses a variety of techniques that allow the evaluation of the physicochemical properties of a material by monitoring its response under controlled temperature. In the case of carbon nanomaterials, such as carbon nanotubes and graphene derivatives, thermogravimetric analysis (TGA) is particularly useful to determine the quality and stability of the sample, presence of impurities and the degree of functionalization or doping after post-synthesis treatments. Furthermore, TGA is widely used to evaluate the thermal stability against oxidation by air, which can be for instance enhanced by the purification of the material and by nitrogen doping, finding application in areas where a retarded combustion of the material is required. Herein, we have evaluated key parameters that play a role in the data obtained from TGA. Within this study we show that the thermogravimetric curve of carbon nanomaterials is greatly influenced by these parameters. This is important in terms of data recording and their analysis, since a poor control of the conditions of measurement might lead to false conclusions. We highlight this by analyzing different samples of graphene and carbon nanotubes where both thermal stability and sample purity assessment are found to be dependent on the employed TGA parameters. Finally, a set of TGA parameters are recommended for the analysis of carbon nanomaterials to obtain reliable data.¡

Bulbophyllum is one of the largest genera and presents some of the most intricate taxonomic problems in the family Orchidaceae, including species of ornamental and medical importance. The lack of knowledge regarding the characterization of Bulbophyllum chloroplast (cp) genomes has imposed current limitations on our study. Here, we reported the complete cp genomes of seven Bulbophyllum species, including B. ambrosia, B. crassipes, B. farreri, B. hamatum, B. shanicum, B. triste and B. violaceolabellum, and compared with related taxa to provide a better understanding of their genomic information on taxonomy and phylogeny. A total of 28 Bulbophyllum cp genomes exhibit typical quadripartite structures with lengths ranging from 145,092 bp to 165,812 bp and GC content of 36.60% to 38.04%. Each genome contained 125–132 genes, encompassing 74–86 protein-coding genes, 38 tRNA genes, and eight rRNA genes. The genome arrangements, gene contents and length were similar with differences observed in ndh gene composition. A total of 18–49 long repeats and 38–80 simple sequence repeats (SSRs) were detected and the single-nucleotide (A/T) was dominant in Bulbophyllum cp genomes, with an obvious A/T preference. An analysis of relative synonymous codon usage (RSCU) revealed Leucine (Leu) was the most frequently used codon, while cysteine (Cys) was the least used. Six highly variable regions including ndhF-trnLUAG, trnTUGU-trnLUAA, trnFGAA-ndhJ, rps15-trnNGUU, rbcL-accD and psbI-trnSGCU were identified based on the ranking of the Pi values, had the potential to serve as DNA markers for species identification and phylogeny of the genus Bulbophyllum. Phylogenetic analysis based on the complete cp genome sequences and 68 protein-coding genes strongly supported 28 Bulbophyllum species can be divided into four branches and sects. Brachyantha, Cirrhopetalum, Leopardinae defined by morphology were non-monophyly. Our results enriched the genetic resources of Bulbophyllum species, providing valuable information to illustrate the complicated taxonomy, phylogeny and evolution process of the genus.

Brown leaf spot disease caused by Alternaria spp. is among the most common diseases in potato crops. Typical brown spot symptoms were observed in commercial potato-cultivated areas of northern Korea during June 2021–2022. In total, 77 isolates were collected, and based on sequence analysis of the internal transcribed spacer (ITS) region, the collected isolates were identified as Alternaria spp. (83.1%). Phylogenetic analysis revealed that a majority of these isolates clustered within a clade that included A. alternata. Additionally, the ITS region and rpb2 yielded the most informative sequences for the identification of A. alternata. Pathogenicity tests confirmed that the collected pathogens elicited identical symptoms in the field. In the pathogenicity test performed on seven commercial cultivars, the pathogens exhibited strong virulence in both wound and non-wound inoculations. Among the cultivars tested, Arirang-1ho, Arirang-2ho, and Golden Ball were resistant to the pathogens. Furthermore, when testing effective fungicides in vitro, mancozeb and difenoconazole were found to be effective agents for inhibiting mycelial growth. In summary, our findings suggest that A. alternata plays a critical role in leaf disease in potato crop regions and emphasise the necessity for continuous monitoring and management to protect against this disease in South Korea.

Easter Island (Rapa Nui) deforestation has traditionally been viewed as a single event, synchronous in time and space across the island and caused by Polynesian settlers. However, recent studies have challenged this idea introducing the concept of spatio-temporal heterogeneity and suggesting a role for climate change. This paper presents a continuous paleovegetation record of the last millennium (~960 to ~1710 CE), based on palynological analysis of a peat core from Lake Kao. During this time interval, deforestation was gradual, with three main pulses at ~1070 CE, ~1410 CE and ~1600 CE, likely driven by drought, anthropogenic practices (mostly fire) or the coupling of both. Some forest regeneration trends have been documented after the first and the second deforestation pulses. Forests were totally removed by 1600 CE, coinciding with the full permanent human settlement of the Kao area. Comparison with other continuous palynological records available for the last millennium (Aroi marsh and Lake Raraku), confirms that forest clearing was heterogeneous in time and space, rather than synchronous island-wide.

Real-time data processing and decision-making are increasingly crucial in various applications, driven by the continuous influx of data streams. Event-driven AI workflows within serverless computing environments offer a promising approach to handle these real-time demands efficiently. This paper presents a framework for simulating and analyzing the performance characteristics of such workflows. Our proposed approach utilizes simulated data with varying event rates and durations to investigate the impact on key performance metrics like latency, throughput, and resource utilization. This enables a comprehensive evaluation of the inherent trade-offs within event-driven AI systems. The key findings reveal a trade-off between latency and throughput. As the event rate increases, average processing latency generally increases while average throughput increases. Resource utilization remains relatively stable across different event rates in the simulated scenarios (e.g., 75.55\% at 2 events/second, 74.51\% at 10 events/second). This framework provides a valuable tool for understanding the performance characteristics of event-driven AI workflows and optimizing resource allocation strategies.

The COVID-19 pandemic has posed a significant global threat, leading to several initiatives for its control and management. One such initiative involves wastewater-based epidemiology, which has gained attention for its potential to provide early warning of virus outbreaks and real-time information on its spread. In this study, water samples from two wastewater treatment plants (WWTPs) located at the south east of Spain (Region of Murcia) namely Murcia, and Cartagena, were analyzed by RT-qPCR, Phylogenetic Analysis, and Machine Learning Approach. The aim was to determine whether SARS-CoV-2 detection in the WWTPs of these two cities could serve as a proxy for the virus's spread in the population. The results confirmed that the levels of SARS-CoV-2 in these wastewater samples changed concerning the number of SARS-CoV-2 cases detected in the population and variant occurrences were in line with clinical reported data. Additionally, the phylogenetic analysis showed that samples obtained in close sampling times exhibited a higher similarity than those obtained more distantly in time. A second analysis using a machine learning approach based on the mutations found in the SARS-CoV-2 spike protein was also conducted. Hierarchical Clustering (HC) was used as an efficient unsupervised approach for data analysis. Results indicated that samples obtained in October 2022 in Murcia and Cartagena were significantly different, which corresponded well with the different virus variants circulating in the two locations. The proposed methods in this study are adequate for comparing the Accumulated Natural Vector (ANV) of the SARS-CoV-2 sequences as a preliminary evaluation of potential changes in the variants that are circulating in a given population at a specific time point.

Lignocellulosic fibers are widely applied as composite reinforcement due to their properties. The thermal degradation behavior determines the maximum temperature in which the fiber can be applied without significant mass loss. It is possible to determine these temperatures using Thermogravimetric Analysis (TG). In particular, when curves are obtained at different heating rates, kinetic parameters can be determined and more detailed characteristics of the material are obtained. However, every curve obtained at a distinct heating rate demands material, cost, and time. Methods to predict thermogravimetric curves can be very useful in the materials science field and in this sense mathematical approaches are powerful tools if well employed. For this reason, in the present study, curaua TG curves were obtained at three different heating rates (5, 10, 20, and 40 °C.min-1) and Vyazovkin kinetic parameters were obtained. After, the experimental curves were fitted using an artificial neural network (ANN) approach followed by a Surface Response Methodology (SRM). Curves at any heating rate between the minimum and maximum experimental heating rates were obtained with high reliability. Finally, Vyazovkin kinetic parameters were tested again with the new curves showing similar kinetic parameters from the experimental ones. In conclusion, due to the capability to learn from the own data, ANN combined with SRM seems to be an excellent alternative to predict TG curves that do not test experimentally, opening the range of applications.

Extreme value analysis (EVA) is well-established to derive hydrometeorological design values for infrastructure that has to withstand extreme events. Since there is evidence of increased extremes with higher hazard potential under climate change, alterations of EVA are introduced for which statistical properties are no longer assumed to be constant but vary over time. In this study, both stationary and non-stationary EVA models are used to derive design life levels (DLLs) of daily precipitation in the pre-alpine Oberland region of Southern Germany, an orographically complex region characterized by heavy precipitation events and climate change. As EVA is fraught with uncertainties, it is crucial to quantify its methodological impacts: two theoretical distributions (i.e., Generalized Extreme Value (GEV) and Generalized Pareto (GP) distribution), four different parameter estimation techniques, (i.e., Maximum Likelihood Estimation (MLE), L-moments, Generalized Maximum Likelihood Estimation (GMLE), and Bayesian estimation method) are compared. Discrepancies due to the parameter estimation methods may reach up to 45 % of the mean absolute value, while differences between stationary and non-stationary models are of the same magnitude (differences in design levels up to 40%). Despite the underlying large methodological uncertainties, there is a robust tendency for increased DLLs in the Oberland region towards the end of this century based on the (non-)stationary models.

Daily rainfall data was collected for the arid district of Ananthapuramu, Andhra Pradesh state, India from 1981 to 2016 at the sub-district level and aggregated to monthly, annual and seasonal rainfall totals and the number of rainy days. The objective of this study is to evaluate the homogeneity, trend, and trend change points in the rainfall data. After quality checks and homogeneity analysis, a total of 27 rain gauge locations were considered for trend analysis. A serial correlation test was applied to all the time series to identify serially independent series. Non-Parametric Mann-Kendall test and Spearman’s rank correlation tests were applied to serially independent series. The magnitude of the trend was calculated using Sen’s slope method. For the data influenced by serial correlation, various modified versions of Mann-Kendall tests (Pre-Whitening, Trend Free Pre-Whitening, Bias Corrected Pre-Whitening and two variants of Variance Correction Approaches) were applied. A significant increasing summer rainfall trend is observed in 6 out of 27 stations. Significant decreasing trends are observed at two stations in the south-west monsoon season and at two stations in the north-east monsoon season. To identify the trend change-points in the time series, distribution-free Cumulative SUM test and sequential Mann-Kendall tests were applied. Two open-source library packages were developed in R language namely, ‘modifiedmk’ and ‘trendchange’ to implement the statistical tests mentioned in this paper. The study will benefit water resource management, drought mitigation, socio-economic development and sustainable agricultural planning in the region.

The analysis of data produced by the MV20/20 sensor, tagged with quality outcomes, is presented with the aim of developing a predictor model for real-time anomaly detection and classification. Three types of inclusions, undesired particles that deteriorate the quality of production, are used to tag the quality data using results from the lab. We explore both unsupervised and supervised learning, which both offer advantages in monitoring and controlling the quality of production. It is discovered that the dataset can be clustered using techniques like K-Means and DBSCAN. Bounding the data within a 95% confidence interval ellipse ensures we can detect anomalous events in real time. For supervised learning, a two-stage classifier is explored, which classifies the outcome of a cast and secondly the inclusion responsible for the negative outcome. We explore models from logistic regression and support vector machines, to two neural networks, namely the multi-layer perceptron and the radial basis function network. While the cast outcome is adequately predicted by all the models, the multi-layer perceptron provides a boundary performance for the inclusion type. A more advanced technique for model optimisation, namely grid search, is applied in order to improve on the results. The outcome for the grid search is not much better, which indicates a global maximum in the learning capacity of the model. Recommendations include the addition of sensor systems and an audit of data collection variation.

Space and water heating for residential and commercial buildings amount to a third of the European Union’s total final energy consumption. Approximately 75% of the primary energy is still produced by burning fossil fuels, leading to high greenhouse gas emissions in the heating sector. Therefore, policymakers increasingly strive to trigger investments in sustainable and low-emission heating systems. This study forms part of the “Roll-out of Deep Geothermal Energy in North-West-Europe”-project and aims at quantifying the spatial heat demand distribution in the Interreg North-West-Europe region. An open-source geographic information system and selected Python packages for advanced geospatial processing, analysis, and visualization are utilized to constrain the maps. These were combined, streamlined, and optimized within the open-source Python package PyHeatDemand. Based on national and regional heat demand input data, three maps are developed to better constrain heat demand at a high spatial resolution of 100*100m2 for the residential and commercial sectors, and for both together (in total). The developed methodology cannot only be applied to transnational heat demand mapping but also on various scales ranging from city district level to states and countries. In addition, the workflow is highly flexible working with raster data, vector data, and tabular data. Results reveal a total heat demand of the Interreg North-West-Europe region of about 1,700TWh. The spatial distribution of the heat demand follows specific patterns, where heat demand peaks are usually in metropolitan regions like for the city of Paris (1,400MWh/ha), the city of Brussels (1,300MWh/ha), the London metropolitan area (520 MWh/ha), and the Rhine-Ruhr region (500 MWh/ha). The developed maps are compared with two international projects, Hotmaps and Heat Roadmap Europe’s Pan European Thermal Atlas. The average total heat demand difference from values obtained in this study to Hotmaps and Heat Roadmap Europe is 24 MWh/ha and 84 MWh/ha, respectively. It is assumed that the implementation of real consumption data is an improvement in spatial predictability. The heat demand maps are therefore predestined to provide a conceptual first overview for decision-makers and market investors. The developed methods will further allow for anticipated mandatory municipal heat demand analyses.

Even today, the automatic digitisation of scanned documents in general but especially the automatic optical music recognition (OMR) of historical manuscripts still remain an enormous challenge, since both handwritten musical symbols and text have to be identified. This paper focuses on the Medieval so-called square notation developed in the 11th-12th century, which is already composed of staff lines, staves, clefs, accidentals, and neumes, that are roughly spoken connected single notes. The aim is to develop an algorithm that captures both the neume and pitch, that is melody information that can be used to reconstruct the original writing. Our pipeline is similar to the standard OMR approach and comprises a novel staff line and symbol detection algorithm, based on deep Fully Convolutional Networks (FCN), which perform pixel-based predictions for either staff lines or symbols and their respective types. Then, the staff line detection combines the extracted lines to staves and yields an F1-score of over 99% for both detecting lines and complete staves. For the music symbol detection we choose a novel approach that skips the step to identify neumes and instead directly predicts note components (NCs) and their respective affiliation to a neume. Furthermore, the algorithm detects clefs and accidentals. Our algorithm recognises these symbols with an F1-score of over 96% if the type is ignored and predicts the true symbol sequence of a staff with a diplomatic symbol accuracy rate (dSAR) of about 87%. If only the NCs without their respective connection to a neume, all clefs, and accidentals are of interest the algorithm reaches an harmonic symbol accuracy rate (hSAR) of approximately 90%.

We examine how observations can be used to evaluate an air quality analysis by verifying against passive observations (i.e. cross-validation) that are not used to create the analysis and we compare these verifications to those made against the same set of (active) observations that were used to generate the analysis. The results show that both active and passive observations can be used to evaluate of first moment metrics (e.g. bias) but only passive observations are useful to evaluate second moment metrics such as variance of observed-minus-analysis and correlation between observations and analysis. We derive a set of diagnostics based on passive observation–minus-analysis residuals and we show that the true analysis error variance can be estimated, without relying on any statistical optimality assumption. This diagnostic is used to obtain near optimal analyses that are then used to evaluate the analysis error using several different methods. We compare the estimates according to the method of Hollingsworth Lonnberg, Desroziers, a diagnostic we introduce, and the perceived analysis error computed from the analysis scheme, to conclude that as long as the analysis is optimal, all estimates agrees within a certain error margin. The analysis error variance at passive observation sites is also obtained.

A mathematical model that incorporates human attacks on dogs is presented to explore the dynamics of rabies transmission. The model divided the infection rate into two categories: dog-to-dog transmission rates during the prodromal phase (βdP) and the furious phase (βdF). It has been determined that the model is well-posed and that all of the solutions are positive, as well as the feasibility and positivity of the model's solutions. Both the basic reproduction number (R0) and the effective reproductive number (Re) are computed, and it is demonstrated that the model has a unique disease-free equilibrium that is globally asymptotically stable whenever Re < 1. To identify the model's most sensitive parameters and the ones that intervention efforts should focus on, sensitivity analysis of the effective reproduction number is carried out. We can construct an optimal control system using the state equations, the adjoint equations, and the optimality condition that determines the controls by applying Pontryagin's Maximum/Minimum principle. To help decision-makers in allocating funds for rabies interventions, cost-effectiveness analyses are conducted. To determine the degree to which the intervention strategies are advantageous and cost-effective, this study performs a cost-effective analysis of one or all possible combinations of the optimal rabies control strategies (pre-exposed and post-exposed vaccination for both dog and human populations) for the four different transmission settings. After arranging the techniques to increase effectiveness (total infections prevented), a cost-effective analysis using the Incremental Cost Effectiveness Ratio (ICER) was conducted. The result supports the function that the four intervention options are performing to either completely eradicate or significantly reduce rabies disease among the populations. The dynamical behavior of the system is studied through simulations using the ode45 numerical technique from MATLAB.

Biological parameters extracted from electrical signals from various body parts have been used for many years to analyze the human body and its behavior. In addition, electrical signals from cancer cell lines, normal cells, and viruses, among others, have been widely used for the detection of various diseases. Single-cell parameters such as cell and cytoplasmic conductivity, relaxation frequency, and membrane capacitance are important. There are many techniques available to characterize biomaterials, such as scanning tunneling microscopy (STM), nanotechnology, microstrip cavity resonance measurement, dielectric impedance measurement (DEPIM), etc. This article reviews the single cell isolation and sorting techniques, summarizes the common single cell operations such as impedance flow cytometry, cell electrical impedance, electrical impedance sensing, and summarizes the current single cell analysis techniques and their applications.

This article summarizes studies using the AIQS-DB method to analyze various types of samples for different purposes. This is a method developed to simultaneously analyze nearly 1500 compounds and is widely used worldwide. The method is highly effective for environmental samples such as water, soil, sediment, and air. Recognizing its potential, this article aims to promote the further application and development of AIQS-DB in research related to food analysis and source tracing. Furthermore, if a suitable dataset can be constructed, it could help research quickly and cost-effectively discover the new bioactive compounds from plant medicine.

Polymer nanocomposites are composed of polymer materials reinforced with nano fillers. In the present study the effective thermal conductivity of the composites filled with nanofillers has been investigated using commercially available finite element software ABAQUS 6.11. The nanofillers used were alumina particles and multi-walled carbon nanotubes (MWNTs) and the matrix was considered to be made of epoxy. For the analysis 2D and 3D Representative Volume Elements (RVEs) were generated using Random Sequential Adsorption (RSA) algorithm using MATLAB and Python scripts. Thermal conductivity was found out for 2D and 3D RVEs for different area and weight fractions respectively. Two different shapes of the alumina nanoparticles were considered: spherical (circular) and ellipsoidal (elliptical) for 3D (2D) analysis. It was found that the thermal conductivity was increased with the addition of nanofillers. The increase in thermal conductivity was approximately same for both types of inclusions at corresponding area or weight fractions in 2D or 3D analysis. The results showed that addition of MWNTs to the composites lead to a significant increase in thermal conductivity than spherical or ellipsoidal inclusions.

Oxidation of a mixture of nonlabelled (14N2H4) and 15N labeled (15N2H4) hydrazine in aqueous solutions produces 14N15N molecules, indicating the intermediate existence of N4H6 or N4H4 dimers with subsequent transfers of H atoms and splitting of lateral N-N bonds. To explain the key part of hydrazine oxidation reaction, the structures, thermodynamics, and electron characteristics of N4H4 molecules in aqueous solution are investigated at CCSD/cc-pVTZ level of theory. We have not found any spontaneous splitting of the bond between lateral nitrogen atoms in tetrazenes N4H4 during geometry optimization. The most probable N4H4 oxidation products are H2N-NH2 and N2, which are obtained by splitting the bond between central nitrogen atoms and so only 15N2 and 14N2 molecules are formed. Additionally, the formation of H3N-NH and N2 oxidation products is also preferred to structures without any N-N fissions. The formation of H2N=N and HN=NH reaction products is energetically less advantageous. Cyclo-N4H4 structures are stable, without any N-N fissions, but their very high Gibbs energies indicate their vanishing abundance in aqueous solution, so their involvement in hydrazine oxidation is highly improbable. Hydrazine oxidation to 14N15N molecules cannot be explained by tetrazene N4H4 intermediates.

A mixture of nonlabeled (14N2H4) and 15N labeled hydrazine (15N2H4) in an aqueous solution is oxidized to 15N2, 14N2, and 14N15N molecules, indicating the intermediate existence of the 14NH2-14NH-15NH-15NH2 with subsequent hydrogen transfers and splitting of side N-N bonds. Structures, thermodynamics, and electron characteristics of various N4H6 molecules in aqueous solutions are investigated using theoretical treatment at the CCSD/cc-pVTZ level of theory to explain the crucial part of the hydrazine oxidation reaction. Most N4H6 structures in aqueous solutions are decomposed during geometry optimization. Splitting the bond between central nitrogen atoms is the most frequent, but the breakaway of the side nitrogen is energetically the most preferred. The N-N fissions are enabled by suitable hydrogen rearrangements. Gibbs free energy data indicate the dominant abundance of NH3... N2... NH3 species. The side N atoms have very high negative charges, which should support hydrogen transfers in aqueous solutions. The only stable cyclo-(NH)4…H2 structure has a too high Gibbs energy and breaks the H2 molecule. The remaining initial cyclic structures are split into hydrazine and HN≡NH or H2N≡N species, and their relative abundance in aqueous solutions is vanishing.

Natural carotenoids are secondary metabolites that exhibit antioxidant, anti-inflammatory and anti-cancer properties. These types of compounds are in high demand by pharmaceutical, cosmetic, textile and food industries, leading to the search for new natural sources of carotenoids. In recent years, the production of carotenoids from bacteria has become of great interest for industrial applications. In addition to carotenoids with C40-skeletons, some bacteria have the ability to synthesize characteristic carotenoids with C30-skeletons. In this regard, a great variety of methodologies for the extraction and identification of bacterial carotenoids has been reported and this is the first review that condenses much of this information. To understand the diversity of these carotenoids, we present their biosynthetic origin in order to focus on the methodologies employed in their extraction and characterization. Special emphasis has been made on high-performance liquid chromatography-mass spectrometry (HPLC-MS) for the analysis and identification of bacterial carotenoids. We end up this review showing their potential commercial use of bacterial carotenoids. This review is proposed as a guide for the identification of these metabolites, which are frequently reported in new bacteria strains.

We present an innovative method harnessing multistability within a diode-pumped erbium-doped fiber laser to construct logic gates. Our approach involves manipulating the intensity of external noise to regulate the probability of transitioning among four concurrent attractors. In this manner, we facilitate the realization of OR, AND, NOT, and NOR logic operations, aligning with the coexisting period-1, period-3, period-4, and period-5 orbits. Employing detrended fluctuation analysis, we establish equilibrium in the probability distributions of these states. The obtained results denote a substantial advancement in the field of optical logic gate development, representing a pivotal stride toward the seamless integration of an all-optical logic gate within laser oscillator-based systems.

In this paper, we explore a new norm on L^p-space called r-norm, and hence producing a new normed space called r-normed space. Measure theoretic and functional analytic properties are covered such as the relation between r-norm and the classical p-norm. An application of r-normed space in probability theory and statsitics is also presented, notably, its role as a rigorous framework in describing the coefficient of determination.

Antimicrobial peptides (AMPs) are considered as promising alternatives to conventional antibiotics in order to overcome the growing problems of antibiotic resistance. Computational prediction approaches receive an increasing interest to identify and design the best candidate AMPs prior to the in-vitro tests. In this study, we focused on the linear cationic peptides with non-hemolytic activity, which are downloaded from the Database of Antimicrobial Activity and Structure of Peptides (DBAASP). Referring to the MIC (Minimum inhibition concentration) values, we have assigned a positive label to a peptide if it shows antimicrobial activity; otherwise the peptide is labeled as negative. Here, we focused on the peptides showing antimicrobial activity against Gram-negative and against Gram-positive bacteria separately, and we created two datasets accordingly. Ten different physico-chemical properties of the peptides are calculated and used as features in our study. Following data exploration and data preprocessing steps, a variety of classification algorithms are used with 100-fold Monte Carlo Cross Validation to build models and to predict the antimicrobial activity of the peptides. Among the generated models, Random Forest has resulted in the best performance metrics for both Gram-negative dataset (Accuracy: 0.98, Recall: 0.99, Specificity: 0.97, Precision: 0.97, AUC: 0.99, F1: 0.98) and Gram-positive dataset (Accuracy: 0.95, Recall: 0.95, Specificity: 0.95, Precision: 0.90, AUC: 0.97, F1: 0.92) after outlier elimination is applied. This prediction approach might be useful to evaluate the antibacterial potential of a candidate peptide sequence before moving to the experimental studies.

This paper pioneers a novel exploration of environmental impacts in livestock farming, with a focus on pig farming's intersection with climate change and sustainability. It emphasizes the transformative potential of data-driven Artificial Intelligence (AI) methodologies, specifically the Internet of Things (IoT) and multimodal data analysis, in promoting equitable and sustainable food systems. The study observes five pigs, aged 86 to 108 days, using a tripartite sensor that records heart rate, respiration rate, and accelerometer data. The unique experimental design alternates between periods of isolation during feeding and subsequent pairing, enabling the investigation of stress-induced changes. Key inquiries include discerning patterns in heart rate data during isolation versus paired settings, fluctuations in respiration rates, and behavioral shifts induced by isolation or pairing. The study also explores potential detection of gait abnormalities, correlations between pigs' age and their gait or activity patterns, and the evolution of pigs' walking abilities with age. The paper scrutinizes accelerometer data to detect activity changes when pigs are paired, potentially indicating increased stress or aggression. It also examines the adaptation of pigs to alternating isolation and pairing over time, and how their heart rate, respiration rate, and activity data reflect this process. The study considers other significant variables, such as time of day and isolation duration, affecting the pigs' physiological parameters. Sensor data is further utilized to identify behavioral patterns during periods of feeding, isolation, or pairing. In conclusion, this study harnesses IoT and multimodal data analysis in a groundbreaking approach to pig welfare research. It underscores the compelling potential of technology to inform about overall pig welfare, particularly stress levels and gait quality, and the power of data-driven insights in fostering equitable, healthy, and environmentally conscious livestock production systems.

An equilibrium problem of the Kirchhoff-Love plate containing a nonhomogeneous inclusion is considered. It is assumed that elastic properties of the inclusion depend on a small parameter characterizing width of the inclusion $\varepsilon$ as $\varepsilon^N$ with $N<1$. The passage to the limit as the parameter $\varepsilon$ tends to zero is justified, and an asymptotic model of a plate containing a thin inhomogeneous hard inclusion is constructed. It is shown that there exists two types of thin inclusions: rigid inclusion ($N<-1$) and elastic inclusion ($N=-1$). The inhomogeneity disappears in the case of $N\in (-1,1)$.

Knowledge-intensive business services (KIBS) are professional services that create new added value by creating, accumulating, and disseminating new knowledge. When it comes to conducting business involving new technology, KIBS play the roles of innovator, user, and producer of new technology that has led to technological innovation. This study aimed to determine the role of KIBS as a tool for innovation in a country’s economic system. Specifically, the degree and role of their impact on the Korean economy were analyzed and compared for the entire KIBS sector, T-KIBS (a new technology-based professional service), P-KIBS (a traditional professional service), and every subsector. For this purpose, the demand-inducement model, supply inducement model, and interlinkage effects method were applied using the 2019 input-output table published in 2022. The analysis showed that the indirect production inducement effect of the entire KIBS industry on other industries was 0.800 KRW, the indirect added value inducement effect was 0.330 KRW, and the supply disruption effect was 1.144 KRW. For T-KIBS, the indirect production inducement effect was 0.687 KRW, the indirect added value inducement effect was 0.272 KRW, and the supply disruption effect was 0.730 KRW. For P-KIBS, the indirect production inducement effect was 1.472 KRW, the indirect added value inducement effect was 0.646 KRW, and the supply disruption effect was 2.657 KRW. Finally, regarding the economic ripple effect of the KIBS subsector, legal and management support services and advertisements corresponding to P-KIBS showed higher figures than the T-KIBS subsectors in all sectors, including production inducement, the added value inducement effect, and the supply disruption effect. These results revealed that in the South Korean economic system, KIBS contribute to production and value addition across all industrial sectors. It is apparent that the absence of supply significantly disrupts other industries. Furthermore, production inducement effects are evenly distributed among all the KIBS subsectors in the secondary and tertiary sectors, while the value-added effects have a greater impact on the tertiary sector. In terms of the supply shortage effects, the secondary sector experiences a more significant impact. This underscores the crucial role of KIBS in sustaining and enhancing overall economic activity in South Korea. This study is significant in that it not only investigated KIBS as an industry group using the advantages provided by industry linkage analysis but also examined and compared detailed subsectors, thereby elaborately evaluating the influence relationship between KIBS and other industries. Therefore, the results presented in this study are expected to be useful for fostering the KIBS industrial sector and establishing economic innovation policies using KIBS.

Water management can improve the quality of valuable ecosystem services but can be costly to implement and the management costs are covered by national taxes collected by water users. Based on 30 valuation studies of water quality improvement from the Environmental Valuation Information System (EVIS) database provided by Korea Environment Institute (KEI), a meta-regression analysis was employed to measure the benefits that major river basins provided to the society. We compare these benefits to the costs, namely River Management Funds (RMFs) which are financial resources to support a variety of projects for managing and improving upstream water quality. Based on benefit-cost comparison, this study evaluates the efficiency of water resource management in South Korea. This study also provides policy options that are helpful to maintain the sustainability of water resource by improving the planning and performance of water management in the long run.

Wireless Sensor networks (WSNs) are gaining more and more research interest due to their ability to monitor large areas more or less independent. However, their reliability is an important issue, since their system reliability is influenced from a hardware, a data and an energetic point of view due to different factors like loading conditions, signal attenuation and battery lifetime. Regarding these issues, the positions of sensor nodes have to be chosen correctly to maximize the system reliability, which has to be considered during the development of new products equipped with WSNs. In this paper, an approach to estimate a WSNs system reliability during the development phase based on the analysis of the measurements on the example of strain measurements in finite elements (FE) models is presented. For that, the part under consideration is divided into regions with similar strains by the use of a Region Growing Algorithm (RGA). Afterwards, the WSN’s configuration is analyzed regarding its reliability in accordance to the data paths and measurement redundancy due to the sensor positions in the found measuring regions. This methodology is tested on an exemplary WSN configuration at an aircraft wing box under bending load and was found to work very well regarding the estimation of the hardware perspective on the system reliability. Therefore, the methodology and the developed algorithm show potentials for optimizations in sensor node positions for better reliability results.

We present a general theory of estimation of analysis error covariances based on cross-validation as well as a geometric interpretation of the method. In particular we use the variance of passive observation–minus-analysis residuals and show that the true analysis error variance can be estimated, without relying on the optimality assumption. This approach is used to obtain near optimal analyses that are then used to evaluate the air quality analysis error using several different methods at active and passive observation sites. We compare the estimates according to the method of Hollingsworth-Lönnberg, Desroziers et al., a new diagnostic we developed, and the perceived analysis error computed from the analysis scheme, to conclude that, as long as the analysis is near optimal, all estimates agree within a certain error margin.

Manufacturing corporations has the acceptance of the Outsourcing Process (OP) to improve industrial activities as well as to archive the revenue objectives, and with this, Risk Analysis (RA) tools are constantly used to assure expected results. Failure Mode and Effect Analysis (FMEA) is one of preferred RA tools, moreover, it is proven that FMEA adds uncertainty because of the human participation at the RA, afterward it is demonstrated that Pythagorean Fuzzy Dimensional Analysis – FMEA – Value Stream Mapping (PFDA-FMEA-VSM) method removes the uncertainty in RA, likewise it aids to the stakeholders for decision making, giving more advantages improving the use of the resources on the project. This document exhibits a real case scenario in a manufacturing firm applying PFDA-FMEA-VSM method adapted for manufacturing OP. The application of PFDA-FMEA-VSM shows solid RA results, removing the human intervention uncertainty added to the risk ranking, gives advantages to the stakeholders for visualize the main risks in detailed diagram, as well as make easier to take better decisions on where to apply resources and mitigate risks during OP.

The interaction between oceanographic, meteorological, and hydrological factors can result in an extreme flooding scenario in the low-lying coastal area, called compound flooding (CF) events. For instance, rainfall and storm surge (or high river discharge) can be driven by the same meteorological, tropical or extra-tropical cyclones, resulting in a CF phenomenon. The trivariate distributional framework can significantly explain compound events' statistical behaviour reducing the associated high-impact flood risk. Resolving heterogenous dependency of the multidimensional CF events by incorporating traditional 3-D symmetric or fully nested Archimedean copula is quite complex. The main challenge is to preserve all lower-level dependencies. An approach based on decomposing the full multivariate density into simple local building blocks via conditional independence called vine or pair-copulas is a much more comprehensive way of approximating the trivariate flood dependence structure. In this study, a parametric vine copula of a drawable (D-vine) structure is introduced in the trivariate modelling of flooding events with 46 years of observations of the west Coast of Canada. This trivariate framework searches dependency by combining the joint impact of annual maximum 24-hr rainfall and the highest storm surge and river discharge observed within the time ±1 day of the highest rainfall event. The D-vine structures are constructed in three alternative ways by permutation of the conditioning variables. The most appropriate D-vine structure is selected using the fitness test statistics and estimating trivariate joint and conditional joint return periods. The investigation confirms that the D-vine copula can effectively define the compound phenomenon's dependency. The failure probability (FP) method is also adopted in assessing the trivariate hydrologic risk. It is observed that hydrologic events defined in the trivariate case produce higher FP than in the bivariate (or univariate) case. It is also concluded that hydrologic risk increases (i) with an increase in the service design life of the hydraulic facilities and (ii) with a decrease in return periods.

Evaluation of agronomic practices, genetic diversity and population structure of Moringa oleifera (Lam.) is crucial to its sustainable utilization to ensure food and nutritional security. Four agronomic practices of field preparation and soil analysis, regeneration, weeding and pruning, as well as harvesting, were adopted. Genetic diversity and population structure of 20 populations were evaluated using amplified fragment length polymorphism (AFLP) primer pairs (E-ACC/M-CAC and E-ACA/M-CAG). The effects of agronomic practices on leaf quantity production were evaluated using standard procedures. The physico-chemical and morphological data were analyzed using descriptive statistics, while genetic diversity, population structure, dendrogram reconstruction, and Principal Component Analysis (PCA) were analyzed from the AFLP genetic data. Significant effects (P ≤ 0.05) of agronomic practices on the quantity of leaf production were recorded across the accessions. The two primer pairs generated a total of 80 alleles with a mean major allele frequency of 0.0250. Gene diversity and polymorphic information content (PIC) values were high with a mean of 0.98 and 0.974, respectively. The Gst value of 0.0490 indicated that 5 % of the total genetic divergence was among the population while 95 % within the population. Dendrogram reconstruction with genetic distance ranging from 0.87 to 0.96 segregated the accessions into eleven clusters while PCA generated six cluster groups. Field preparation and physico-chemical soil properties, regeneration, weeding and pruning, and stand development, as well as harvesting, influenced the leaf yield and genetic diversity observed in this study. The genetic data revealed that some accessions were clustered along eco-geographical lines while others grouped disparately. Identified potential parent genotypes with valuable and desirable genetic traits can be exploited for commercial, breeding and conservation purposes to ensure sustainable utilization of the species in Nigeria.

Cancer is a condition in which the body's cells proliferate unchecked. Skin cancer is one of the deadliest diseases that impacts the skin on many levels. There are several different types of the disease, including melanoma, basal cell carcinoma (BCC), squamous cell carcinoma (SCC), and melanocytic nevus. Due to its increased prevalence, skin cancer, in particular melanoma, is be-coming a serious health problem. Early identification of skin lesions is crucial for successful treatment. Due to their resemblance, many skin lesions are misclassified, which is a severe issue. Researchers seek computer-aided diagnostic tools for early malignant tumor detection. First, a new model based on the combination of "you only look once" (YOLOv5) and "ResNet50" is proposed for melanoma detection with its degree using humans against a machine with 10,000 training images (HAM10000). Second, feature maps integrate gradient change, which allows rapid inference, boosts precision, and reduces the number of hyperparameters in the model, making it smaller. Finally, to get the desired outcomes, the current YOLOv5 model is changed by adding new classes for dermatoscopic images of typical lesions with pigmented skin. The pro-posed approach improves melanoma detection with a real-time speed of 0.4 ms non-maximum suppression (NMS) per image. The performance metrics average is 99.0%, 98.6%, 98.8%, 99.5, 98.3%, and 98.7% for precision, recall, dice similarity coefficient (DSC), accuracy, mean average precision (MAP) from 0.0 to 0.5, and MAP from 0.5 to 0.95, respectively. Compared to cur-rent melanoma detection approaches, the provided approach is more efficient using deep fea-tures.

Tuberculosis (TB) remains a global healthcare crisis with an estimated 10 million new cases and 1.4 million deaths per year TB is caused by infection with the major human pathogen Mycobacte-rium tuberculosis, which is difficult to rapidly diagnose and treat. There is an urgent need for new methods of diagnosis, sufficient in vitro models which capably mimic all physiological condi-tions of the infection, and high-throughput drug screening platforms. Microfluidic-based tech-niques provide single-cell analysis which reduces experimental time, the cost of reagents, and have been extremely useful for gaining insight into monitoring microorganisms. This review out-lines the field of microfluidics and discusses the use of this novel technique so far in M. tuberculo-sis diagnostics, research methods, and drug discovery platforms. The practices of microfluidics have promising future applications for diagnosing and treating TB.

Gait analysis has historically been implemented in laboratory settings with expensive instruments; however, recently, wearable sensors have allowed the integration into clinical applications and use in daily activities. Previous studies have shown poor validity of ankle joints using inertial measurement units (IMUs), especially for small movement ranges. The purpose of this study was to validate the ability of commercially available IMUs to accurately measure the ankle joint angles during running. Ten healthy subjects participated in the study. Validation was performed by comparing the ankle joint angles measured using the wearable device with those obtained using the gold standard motion capture system during running. Reliability was evaluated using the intraclass correlation coefficient and standard error of measurement, whereas validity was evaluated using Pearson coefficient correlation method. Day-to-day reliability was excellent in the two planes for ankle joints. Validity was good in both sagittal and frontal planes for ankle joints. The results suggested that the developed device might be used as an alternative tool to the 3D motion capture system.

One of the challenges facing the industrial adoption of additively manufactured parts is the surface roughness on the as-built part. The surface roughness of parts is frequently characterized by metrics specified by international standards organizations. However, these standards list many surface metrics that can make it unclear which to use to best describe the surface. In this work, the ability of the various surface metrics to successfully classify the as-built and post-processed surfaces is studied using linear classification models. Laser polishing via remelting and manual grinding are the post-processing techniques used to smooth the as-built surface. The ability of the linear classifier to successfully categorize the various surfaces is demonstrated, and the various surface metrics are ranked according to the strength of their individual ability to classify the surfaces. This work promotes the method as a potential way to autonomously classify as-built and laser polished surfaces.

In standard construction of hyperrational numbers using ultra-power we assume that the ultra lter is selective. It makes possible toassign real value to any nite hyperrational number. So, we can consider hyperrational numbers with selective ultra lter as extension of traditional real numbers. Also proved the existence of strictly monotonic or stationary representing sequence for any hyperrational number.

Motivated by Autonomous vehicle idea and driving safety issues, driver assistance system such as Active braking, Cruise Control, Lane departure warning lane keeping and etc. has become a very active research area. However, this paper presents the performance and robustness analysis of a model predictive control and proportional integral derivative control for lane keeping maneuvers of an autonomous vehicle using computer vision simulation studies. A simulation study was carried out where a vehicle model based on single tracked bicycle model was developed in MATLAB/SIMULINK environment together with a vision dynamic system. Both PID controller and MPC were simulated to maintain the desired reference trajectory of the vehicle by controlling steering angle. Further performance and robustness analysis were carried out and the simulation results show that the proposed control system for the PID control achieved its objective even though it was less robust in maintaining its performance under various conditions like vehicle load change, different longitudinal speed and different cornering stiffness. While in the case of MPC the optimizer made sure that the predicted future trajectory of the vehicle output tracks the desired reference trajectory and was more robust in maintaining its performance under same conditions as in PID.

The objective of this study is to investigate the effect of the premixed ethanol ratio based on the same total heating value in-cylinder on the equivalence ratio distributions and the injected fuel droplet behavior in the cylinder of the RCCI engine. The spray simulation was conducted by dividing two-part. First, the spray validation simulations progressed to find the spray-influenced factor of the test injector. Next, the engine simulations were performed with the spray-influenced factor obtained from spray validation simulations to investigate the effect of the premixed ethanol ratio based on the same total heating value in-cylinder on the injected fuel atomization and the equivalence ratio distributions. The introduced total heating value was fixed at 595J based on the lower heating value of diesel 14mg. The heating value of the premixed ethanol ratio varied from 0% to 40% based on the same total heating value in-cylinder in steps of 10%. It was revealed that when the premixed ethanol ratio based on the same total heating value in-cylinder was increased, the spray tip penetration value was reduced from the time after 4deg of diesel injection start because of the short injection duration by the small amount of diesel fuel. The SMD value was also more enormous up to 32.58% with increasing the premixed ethanol ratio because of the low kinetic energy of the injected fuel by the short injection duration and the slow evaporation of the injected fuel by the low cylinder temperature.

The combination of organic matter, iron oxide, and clay minerals is of great significance for the adsorption of copper ions (Cu). The purpose of this study is to explore the characteristics of Cu adsorption and laws governing Cu complexation to organic–inorganic, organic–clay mineral, and iron-oxide–clay mineral complexes in the sediments in the estuary of plateau fault and sinking lake——Dianchi Lake. In this study, Cu adsorption tests were performed on the three complexes, in order to study the kinetic behavior of adsorption, Langmuir and Freundlich isotherm models were used. The samples before and after adsorption were characterized via scanning electron microscope (SEM), Fourier infrared spectroscopy (FTIR), and X-ray diffraction (XRD). Our results show that, the Freundlich isotherm models model was able to describe adsorbent behavior in comparison to the Langmuir models. During the Cu adsorption process, the iron-oxide–clay mineral complex is able to adsorb Cu, via coordination exchange, through the –OH contained therein. Organic-matter–clay mineral complexes bonded to the surfaces of clay minerals by replacing the hydroxyl groups with functional groups (carboxyl groups or phenolic hydroxyl groups) contained in the organic matter. Organic–inorganic composites then adsorbed Cu through the coordination exchange of –OH in the polar functional groups of alcohols, phenols, and carboxylic acids. The adsorption capacity of Cu in these three sediment complexes was observed to have the following order: organic–inorganic complex &gt; organic-matter–clay mineral complex &gt; iron-oxide–clay mineral complex. The semi-quantitative analysis results of Fourier Infrared Spectroscopy show that the organic matter (changes in the peak area of functional groups such as carboxyl groups) in the organic-inorganic composite material has an important effect on the amount of copper ions adsorbed by clay minerals.

This article presents a comprehensive study on enhancing grid resilience through advanced forecasting and optimization techniques in the context of power outages. Power outages pose significant challenges to modern societies, affecting various sectors such as industries, households, and critical infrastructures. The research combines statistical analysis, machine learning algorithms, and optimization methods to address this issue to develop a holistic approach for predicting and mitigating power outage events. The proposed methodology involves the use of Monte Carlo simulations in MATLAB for future outage prediction, Long Short-Term Memory (LSTM) networks for forecasting solar irradiance and load profiles, and a hybrid LSTM-Particle Swarm Optimization (PSO) model to improve accuracy. Furthermore, the role of Battery State of Charge (SoC) in enhancing system resilience is explored. The study also assesses the techno-economic advantages of a grid-tied microgrid integrated with solar panels and batteries over conventional grid systems. The results highlight the potential of the proposed approach in strengthening grid resilience, reducing downtime, and fostering sustainable energy utilization.

Target 12.3 of the United Nations Sustainable Development Goals (SDGs) calls for halving per capita global food waste at the retail and consumer levels, by 2030. The Food Waste Index is suggested as a methodology for grasping the situation. This paper focuses on the consumer level (household food waste). We argue that in order for generating useful information for devising and implementing effective measures for reducing food waste, it should be measured at Level 3 of the Food Waste Index, based on sorting analysis of generated waste, making a distinction between avoidable and non-avoidable food waste. Furthermore, a breakdown by sub-categories that reflect the flow of food in the household could help identify target behaviours. We have developed a categorisation scheme that is internationally agreeable and adoptable, and 1) generates useful information for policy-making and for tackling with reduction of food waste, 2) makes clear the concept of avoidable food waste, and 3) is practical and does not overcomplicate the work of grasping the situation of food wastage. Results of workshops regarding this scheme suggest that the scheme satisfies the criteria. This scheme has been applied to a few sorting analyses of household food waste in Japan, and their results are compared.

Rheumatoid arthritis (RA) is an autoimmune disease in which joints are gradually de-stroyed, and early diagnosis and treatment before joint deformation or destruction is im-portant. The detection of novel RA biomarkers in saliva may facilitate the early detection of RA before the onset of disease. In this study, we conducted a comprehensive proteomic analysis of salivary proteins from RA model mice. Proteins were identified by Western blotting and enzyme-linked immunosorbent assay in serum, saliva, and ankle joints from DBA/1JJmsSlc mice, a model of rheumatoid arthritis. Ankle joints and submandibular glands were hematoxylin and eosin stained and immunostained, and the results were compared with those of control mice. Citrullinated α1 antitrypsin (A1AT, 46 kDa) was commonly detected in saliva, serum, and ankle joints of severe RA model mice, and was confirmed by proteome analysis. Western blotting detected a band corresponding to 46 kDa in serum, saliva and ankle joints, and immunostaining of ankle joints with A1AT an-tibody showed a strong positive signal in the synovium. In DBA/1JJmsSlc mice, not only cyclic citrullinated peptide antibodies but also A1AT may be involved in protein citrulli-nation and contribute to the development and severity of RA.

Lightweight component design is effectively achievable through the sandwich structures, many past research studies in the aerospace and racing sectors (since 1920s) has proven it. To extend their application into automotive and other transport industries, the manufacturing cycle times must be reduced. This can be achieved by thermoplastic sandwich materials of continuous fibre-reinforced thermoplastic (CFRTP) cover layers and thermoplastic honeycomb cores. To widespread the application of flat thermoplastic-based sandwich panels into complex parts, a novel forming technology was developed by the Fraunhofer Institute of Microstructure of Materials and Systems (IMWS). For an increase in reproducibility of the sandwich component production and a decrease in manufacturing defects, numerical modelling methods and experimental validation are needed. The finite element (FE) modelling of this thermoforming process is a thermo-mechanical assignment with all three: material, geometry, and boundary non-linearities. In the scope of this work, the material behavior of different sandwich components (cover layers, honeycomb core, interface) under thermo-mechanical loads is characterized in detail, and a complex numerical model is developed to describe the thermoforming process of thermoplastic-based sandwich laminate. The critical forming condition like wrinkling that occurs due to friction in a sandwich or poor intra-ply shear in cross-ply studied, validated, and optimized. A thermoplastic sandwich made of polypropylene (PP) honeycomb core and polypropylene glass fibre (PP/GF) cross-ply as cover layers was used for this study, and numerical modelling was executed in LS-DYNA software.

In the interaction of the rolling stock and the upper structure of the railway track, intense dynamic loads occur. They have a destructive effect both on the parts of the rolling stock and on the elements of the superstructure of the track. In order to develop a durable, rational and reliably functioning design of cars and locomotives with good dynamic properties and good indicators of the impact of rolling stock on the railway track, along with theoretical computational studies, experimental studies are also required, which are usually the final stage in the design and implementation of rolling stock or modernization of existing ones. Locomotives and wagons in order to improve their strength and dynamic performance. The article presents the results of field tests to determine the dynamic performance of the type CKD6e diesel locomotive. The description of the preparation of the CKD6e shunting locomotive for testing is given. An analysis of the dynamic performance of a diesel locomotive during the passage of turnouts, on a straight section of the track and in a curve with a radius of 400 m, was carried out. The studies performed showed that the minimum value of the stability factor against wheel derailment on a straight section of the track is significantly higher than the standard value. The experimentally obtained ratio of frame forces to the static load from the wheelset on the rails, the coefficients of vertical dynamics of the first and second stages of suspension and the coefficient of stability against derailment of the wheel from the rail, registered on the track section in a curve with a radius of 400 m) meet the current requirements. A calculation scheme and equations of vertical oscillations are proposed, an analysis is carried out according to the graphs of movements of bogies and a locomotive body when moving along irregularities of different lengths at different speeds.

Background: The world, now in an emergency of preventing the drastic spread of COVID-19. After the infection was first reported in December 2019, almost every country did not pay attention to this highly contaminated disease and failed to react swiftly. Now the whole universe is in an vulnerable state, loosing a great loss of lives and facing difficulties in all socio-economic aspects. That is why we have the urge to develop an efficient mathematical model (quarantine) based on social consciousness to control the epidemic. Methods: This is a quarantine mathematical model. The outcome of the system is dependent on social consciousness. We have calculated the awareness level by considering various socio-economic factor of each country. In our model, the parameters are Education Index, GDP per capita, population density, high literacy and stable economy. To maximize the efficiency of the model, it has to be implemented in initial stage. However, strict application of the method in vigorous stage of epidemic will also bring a satisfactory outcome. Results: Higher social consciousness will decrease the number of infected population dramatically while minimal or lower awareness will do a outburst. Conclusion: Outbreak will be in control of health care system, lower the death rate and will ensure social and economic stability.

Cancer-associated fibroblasts (CAF) are highly prevalent cells in the tumor microenvironment in clear cell renal cell carcinoma (ccRCC). CAFs exhibit a pro-tumor effect in vitro and have been implicated in tumor cell proliferation, metastasis, and treatment resistance. Our objective is to analyze the geospatial distribution of CAFs with proliferating and apoptotic tumor cells in the ccRCC tumor microenvironment and determine associations with survival and systemic treatment. Pre-treatment primary tumor samples were collected from 96 patients with metastatic ccRCC. Three adjacent slices were obtained from 2 tumor-core regions of interest (ROI) per patient, and immunohistochemistry (IHC) staining was performed for αSMA, Ki-67, and caspase-3 to detect CAFs, proliferating cells, and apoptotic cells, respectively. H-scores and cellular density were generated for each marker. ROIs were aligned, and spatial point-patterns were generated, which were then used to perform spatial analyses using a normalized Ripley's K function at a radius of 25μm (nK(25)). The survival analyses used an optimal cut-point method, maximizing the log-rank statistic, to stratify the IHC-derived metrics into high and low groups, and multivariable Cox regression analyses were performed accounting for age and International Metastatic RCC Database Consortium (IMDC) risk category. Survival outcomes included overall survival (OS) from the date of diagnosis, OS from the date of immunotherapy initiation (OS-IT), and OS from the date of targeted therapy initiation (OS-TT). Therapy resistance was defined as progression-free survival (PFS) <6 months, and therapy response was defined as PFS >9 months. CAFs exhibited higher cellular clustering with Ki-67+ cells than with caspase-3+ cells (nK(25): Ki-67 1.19; caspase-3 1.05; P = .04). The median nearest neighbor (NN) distance from CAFs to Ki-67+ cells was shorter compared to caspase-3+ cells (15 μm vs 37μm, respectively; P < .001). Multivariable Cox regression analyses demonstrated that both high Ki-67+ density and H-score were associated with worse OS, OS-IT, and OS-TT. Regarding CAFs, only a high H-score was associated with worse OS, OS-IT, and OS-TT. For caspase-3+, high H-score and density were associated with worse OS and OS-TT. Patients whose tumors were resistant to targeted therapy (TT) had higher Ki-67 density and H-scores than those who had TT response. Overall, this ex vivo geospatial analysis of CAF distribution suggests that close proximity clustering of tumor cells and CAFs potentiates tumor cell proliferation, resulting in worse OS and resistance to TT in metastatic ccRCC.

Like other ICT communities, sustainability in software engineering is a major research and development concerns. Current research focusses on eliciting the meanings of sustainability and proposing approaches for its engineering and integration into the mainstream software development lifecycle. However, few concrete guidelines that software designers can apply effectively are available and applicable. Such guidelines are needed for the elicitation of sustainability requirements and testing software against these guidelines. This paper introduces a sustainability design catalogue to assist software developers and managers in eliciting sustainability requirements, and then in measuring and testing software sustainability. The paper reviews the current research on sustainability in software engineering which is the grounds for the development of the catalogue. Four different case studies were analyzed using the Karlskrona manifesto on sustainability design. The output from this research paper is a software sustainability design catalogue through which a pilot framework is proposed that includes a set of sustainability goals, concepts and methods. The integration of sustainability for/in software systems requires a concrete framework that exemplifies how to apply and quantify sustainability. The paper demonstrates how the proposed software sustainability design catalogue provides a step towards this direction through a series of guidelines.

Research on early stages of corrosion of steel bars, together with the formation and development of cracks induced in the surrounding concrete and caused by chloride penetration, is relevant in improving the durability of reinforced concrete structures. This paper uses integration of the analytical models examined in the published literature, combined with experimental research in corrosion induced at the concrete/steel interface, in estimating the time-to-crack initiation of reinforced concrete subjected to corrosion. This work studies the influence of the porous network and electric current density on the cracking process at early ages. The experimental campaign was performed by using an accelerated corrosion test on a conventional concrete (CC) and a concrete with silica fume (SFC) by submitting them to a current density of 50μA/cm² and 100μA/cm². Examination performed by scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) provided both qualitative and quantitative information on the penetration of the rust layer in the surrounding concrete porous network. Strain gauges were used to measure corrosion-induced deformations between steel and concrete matrices, as well as the formation of corrosion-induced cracks. A good correlation between the rate of penetration of the rust products in the surrounding pores and the delay of the cracking pressure in concrete was observed from the experimental results. This phenomenon is incorporated into the analytical model by using a reduction factor, which mainly depends on the pore size of the concrete. The crack width obtained exhibited a significant dependency on electric current density at the beginning of the test, depending mainly on the pore size of the concrete later.

In cold-climate regions, road salt is used as a de-icer for winter road maintenance. The applied road salt melts ice and snow on roads, being washed off through storm sewer systems into nearby urban streams, harming the freshwater ecosystem. Addressing the gap in the knowledge regarding the use of deep learning approaches for urban stream water quality forecasting, the present work discusses our implementation of a “Graph Neural Network” - “Sample and Aggregate” (GNN-SAGE) model for forecasting chloride concentrations in the Credit River in Ontario, Canada. The proposed GNN-SAGE is compared to other models, including a Deep Neural Network based transformer (DNN-Transformer) and a benchmarking persistence model for 6 hours forecasting horizon. Ac-cording to the results, the GNN-SAGE model surpasses other models in providing accurate predic-tions of chloride concentrations within the assessed prediction window. Also, a SHAP analysis provides insight into the variables that influence the model’s forecasting, showing the impact of the spatiotemporal neighbouring data from the network and the seasonality variables on the model’s result. The GNN-SAGE model shows potential for use in real-time forecasting of water quality in urban streams, aiding in the development of regulatory policies to protect the vulnerable freshwater ecosystems in urban areas.