Abstract: Assessing infection by a parasite, such as Haemonchus contortus, requires time and experienced personnel. Field-based diagnostics using metagenomic species-specific targeting methods would be beneficial. Here, we examine two helminth control methods, zoledronic acid (ZA), an activator of γ δ T cells, and a neutralizing antibody (AB) against γ δ T cells. We conducted a randomized complete block designed investigation for the effects of Haemonchus contortus (Hc) infection on Alpine wethers (young castrated male goats) to identify if metagenomic methods will provide strong evidence for diagnostics. Different tissues were collected from wethers and the microbiome compositions were identified. The relative proportion of microbial community members in the environments; the richness of the microbial community; and the evenness of distribution in microbial community members were determined. It was hypothesized that numerous parameters that include many data points will provide a more precise means to identify infection or health based on similarity to uninfected control data parameters. We found that samples did not sequence well, when multiplexed with high concentration libraries, giving taxonomic numbers that had residual and unmeasured confounding bias related to analysis or selection that define significance of OTUs in the tissue samples at the phylum or species level.

Solid waste management is a major environmental challenge, especially in developing countries, with increasing amounts of waste glass (WG) and waste plastics (WP) not being recycled. In Ethiopia, managing WG and WP requires innovative recycling techniques. This study examines concrete properties with WG and WP as partial replacements for fine aggregate. Tests were conducted on cement setting time, workability, compressive strength, splitting tensile strength, and flexural strength. Concrete grade C-25, with a compressive strength of 25 MPa, was prepared using an optimum ratio of 14% WG and 6% WP. Mechanical properties were tested at 7 and 28 days of curing. At 20% replacement, workability decreased at water-cement ratios of 0.5 and 0.6 but remained stable at 0.4. Thus, a 0.4 ratio was used. For 10% replacement, compressive strength increased by 12.55% and 6.44% on the 7th and 28th days, respectively. At 20% replacement, compressive strength decreased by 14.35% and 0.73% on the 7th and 28th days, respectively. On the 28th day, splitting tensile strength at optimum replacement was 4.3 MPa, an 8.5% reduction from the control mix. However, flexural strength increased by 19.7%, from 12.46 MPa to 15.52 MPa. Overall, WG and WP improved flexural strength but slightly reduced splitting tensile strength.

Sado island in Niigata prefecture is among the first GIAHS designated sites in Japan and among developed countries worldwide. Recent studies have pointed out the need to incorporate culture and farmer opinions to further strengthen GIAHS inclusivity in rural farming. In connection to this, the study explored whether farmer visibility, which is highlighted by GIAHS designation, actually translates to farmers’ actual perception of GIAHS involvement. A survey was conducted among Sado island farmers to determine their knowledge and perception of their GIAHS involvement, in connection to their perspectives on youth involvement, Sado island branding, and tourism management. Results showed that 56.3% of Sado island farmers feel uninvolved or unsure towards GIAHS, which is in stark contrast with the prevalent farming method in the area which is special farming (complies with GIAHS regulations). Further analyses revealed that farmers who feel that GIAHS does not promote youth involvement, Sado island branding, and tourism management have higher predisposition to perceive themselves as uninvolved towards GIAHS. This study highlights the need for careful reevaluation and integration of farmer insights and needs to the current GIAHS implementation in Sado island and in other GIAHS as well.

Integrated crop-livestock production (ILP) is an interesting alternative for more sustainable soil use. However, more studies are needed to analyze soil pore properties under ILP at the micrometer scale. Thus, this study proposes a detailed analysis of soil pore architecture at the micrometer scale in three dimensions. For this purpose, samples of an Oxisol under ILP subjected to minimum tillage (MT) and no-tillage (NT) with ryegrass as cover crop (C) and silage (S) were investigated. The soil micromorphological properties of the soil were analyzed using X-ray microtomography. The MT(C) system showed the highest values of porosity (c. 20.4%), connectivity (c. 32.8×103), volume (c. 26%), and number of pores (c. 32%) in a rod-like shape. On the other hand, the MT(S), NT(C), and NT(S) systems showed higher tortuosities (c. 2.2, c. 2.0, and c. 2.1) and lower pore connectivities (c. 8.3×103, c. 6.9×103, and c. 6.2×103), especially in S use. Ellipsoidal and rod-shaped pores predominated over spheroidal and disc-shaped pores in all treatments. The results of this study show that the use of ryegrass as a cover crop improves soil physical properties, especially in MT. For S use, the type of soil management (MT or NT) did not show any differences.

LPA3 receptors were expressed in TREx HEK 293 cells, and their signaling and phosphorylation were studied. The agonist, lysophosphatidic acid (LPA), increased intracellular calcium and ERK phosphorylation through pertussis toxin-insensitive processes. Phorbol myristate acetate, but not LPA, desensitizes LPA3-mediated calcium signaling. The agonists and the phorbol ester-induced LPA3 internalization. Pitstop 2 (clathrin heavy chain inhibitor) markedly reduced LPA-induced receptor internalization; in contrast, phorbol ester-induced internalization was only delayed. LPA induced rapid β-arrestin-LPA3 receptor association. The agonist and the phorbol ester induced marked LPA3 receptor phosphorylation, and phosphorylation sites were detected using mass spectrometry. Phosphorylated residues were detected in the intracellular loop 3 (S221, T224, S225, and S229) and in the carboxyl terminus (S321, S325, S331, T333, S335, Y337, and S343). Interestingly, phosphorylation sites are within sequences predicted to constitute β-arrestin binding sites. These data provide insight into LPA3 receptor signaling and regulation.

Climate change complies firms to introduce various measures to enhance both their competitiveness and sustainability, particularly energy efficiency measures (EEMs). Energy efficiency is particularly important in energy-intensive sectors such as the industrial sector. However, EEMs within the industrial firms are hindered by several internal barriers such as competing interests within firms, the lack of information regarding energy efficiency opportunities, and the low technical competence. In this regard, energy audit aims to improve energy efficiency in facilities and to tackle internal barriers to energy efficiency. We construct a model which aims to explore the importance of energy audit in implementing EEMs and reducing the intensity of internal barriers to energy efficiency. Our research model was empirically tested through survey data gathered from 193 industrial firms in Morocco. Results show that competing interests, the lack of information and the low technical competence hinder the adoption of EEMs within industrial firms. In addition, energy audits enhance EEMs, and mitigate the negative effect of the lack of information and the low technical competence on the adoption of EEMs. However, energy audits do not attenuate the negative effect of competing interests on EEMs. This study reinforces previous studies with additional confirmation regarding the importance of energy audits for tackling the lack of information, and the low technical competence within firms. Furthermore, our study extends prior research as we found that energy audits do not reduce the intensity of competing interests within firms regarding EMMs’ implementation.

Cotton cultivation and sustaining its productivity is challenging in temperate arid regions around the globe. Exploring suitable cotton cultivation areas to improve productivity in such climatic regions is essential. Thus, this study explores the ecologically suitable areas of cotton cultivation using the Maxent model, having 375 distribution points of long-staple cotton and various factors, including 19 climatic factors, 2 terrain factors, and 6 soil factors in Xinjiang. The area under the curve (AUC) of the predicted results was greater than 0.9, indicating that the model's predictions had fairly high accuracy. However, the main environmental factors that affect cotton's growth are the lowest temperature in the coldest month, the hottest month, the precipitation in the driest season, and the monthly average temperature difference. Further, the temperature factors contribute 71%, while the contribution ratio of terrain and soil factors is only 22%. The research shows that the current planting area is consistent with the predicted area in many areas of the study. Still, some areas, such as the Turpan region, northwest of Bayingolin Mongol Autonomous Prefecture, are supposed to be suitable for planting cotton, but it is not planted. The current potential distribution area of long-staple cotton is mainly located in Aksu Prefecture and the northern part of the Kashgar Prefecture region. The climatic prediction shows that the growing area of long-staple cotton may expand to southern Altay, central Aksu, and Bortala Mongol Autonomous Prefecture. This study will be helpful for cotton cultivation suitability areas in Xinjiang and other regions with similar environments.

Climate variation and change are an unavoidable phenomenon faced by the natural habitat of this planet. For getting potential yield from vegetable crops under the changing climate conditions, the practical strategies at field level can serve as a guideline for the farmers. Moreover, there are several strategies available for mitigating the harmful effects of climate change. In this manuscript, efforts have been made for reviewing the mitigating strategies against the impact of climate change in vegetable crops via conventional approaches. Considering the situation, the information reviewed revealed that significant result of conventional approaches with climate-smart adoptions strategies has a direct bearing on vegetable production for the increasing population in frenziedly changing climate scenario.

Mediterranean climate is marked by arid climate conditions in summer, therefore, crop irrigation is crucial to sustain plant growth and productivity in this season. If groundwater is utilized for irrigation, an impressive water pumping is needed to satisfy crop water requirements at catchment scale. Consequently, irrigation water quality gets worse, specifically considering groundwater salinization near the coastal areas due to seawater intrusion, also triggering soil salinization. With reference to an agricultural coastal area in the Mediterranean basin (Southern Italy), close to the Adriatic sea, an assessment of soil salinization risk due to processing tomato cultivation was carried out. A simulation model was arranged to perform, on daily basis, a water and salt balance along the soil profile. Long-term weather data and soil physical parameters representative of the considered area were utilized in applying the model, also considering three salinity levels of irrigation water. Based on the climatic analysis performed and the model outputs, the probability of soil salinity came out very high, such as to seriously threaten tomato yield. Autumn-winter rainfall resulted frequently insufficient to leach excess salts away from the soil profile and reach sustainable conditions of tomato cultivation. Therefore, alternative cropping strategies were prospected.

The study focused on the technical and scale efficiency of smallholder pineapple farmers in the Central Region of Ghana. The input-oriented Data Envelopment Analysis (DEA) was used to estimate technical, pure and scale efficiencies of the smallholder pineapple farmers, of which a random sampling procedure was used to select 320 respondents. The study revealed that the farmers were technically inefficient with mean technical efficiency under Constant Returns to Scale (CRS), pure efficiency under Variable Returns to Scale (VRS) and the Scale Efficiency levels of 0.505, 0.641 and 0.772, respectively, due to farmers’ inability to exploit fully the available technology while experiencing evident post-harvest losses resulting from low adoption of post-harvest technologies. Such findings are meaningful and could help the farming communities and relevant policymakers to understand the issues in farming production and hence undertake necessary actions to potentially improve farmers’ technical and scale efficiencies in the study area.

Food insecurity remains a critical challenge in developing countries like Ethiopia. Majority of its population derive their livelihood from agriculture characterized by mixed farming systems. Smallholder farmers the principal actors of agriculture are also facing a rapidly increasing population and urbanization had been unable to be self-sufficient in food. This paper examines the role of commercialization on food security and its determinants in rural settings. We used cross-sectional data from 295 households randomly selected in northwest Ethiopia. Results from bivariate Tobit regression revealed both crop and livestock commercialization improves household food security but in quite different ways. The income from crop sales was instrumental in allowing households to buy additional foods while livestock sales foster crop diversity for own consumption by allowing them to purchase nonfood items. Thus, agriculture-food security nexus may not require the production systems to be subsistent. Improving commercialization with better access to off-farm employment and institutional services (credit and market infrastructure), and enhanced awareness of the extension towards promoting commercialization and diversified food consumption seem to be more promising. The research paper concludes commercialization is vital not just for economic growth and food security, but also for the smallholder agriculture in providing additional nutrition.

Climate change mainly affects production and consumption systems, such as: food, livelihoods, production (e.g., reduced milk production), water, and land use. The role of local knowledge has been recognized as important for decision-making under changing circumstances. This study was conducted in the northern part of the Ecuadorian Andes using a sample of 170 dairy-cattle-producing households. The objectives were: i) to characterize the rural livelihoods of dairy cattle farmers, ii) to evaluate access to climate information and perceptions of climate change, and iii) to determine the relationship between livelihoods and perceptions of climate change. Significant differences were identified between the groups evaluated in relation to the dairy farmers’ livelihoods. In addition, 85.29% of the respondents mentioned that climate information is important, but 67.83% do not trust the sources of information. It was found that there is a significant relationship between the level of education and age with the variables of climate change perceptions. This combined knowledge allows people to promote agri-environmental and educational policies to achieve climate literacy at a rural level.

While several studies have examined the impact of the Covid-19 pandemic on smallholder rural farmers and possible efforts to scale up their livelihood and food security, the role of consumers’ buying orientation in addressing farmers’ vulnerability in the post-pandemic era has not been explored. The paper, therefore, aims to propose and conceptualize humane buying orientation, and further explore its role in attenuating smallholder rural farmers’ vulnerability in the new normal. The qualitative design approach has been employed in two different studies. Collected data were analyzed using the SPSS 23.0 and following the interpretative phenomenological analysis. Findings validate humane buying as an altruistic orientation that will contribute to lessening the vulnerability of smallholder rural farmers in the post-pandemic era. It also shows that an enlarged-stakeholders’ (government, international agencies, corporate bodies, institutions, privileged individuals/consumers, religious organizations, etc.) effort that is rooted in morality and empathy, is required to successfully tackle the vulnerability of smallholder rural farmers, especially in developing countries such as Nigeria. The study is the first to propose, conceptualize and validate humane buying as a post-Covid-19 orientation that is capable of attenuating the vulnerability of smallholder rural farmers which has been worsened by the pandemic. The paper contributes to the understanding of emerging strategic actions required for the attainment of the United Nation’s sustainable development goals - ending poverty and hunger by 2030, and how consumers can play a key role.

While current studies have focused on adoption and the relevant content of the app to become a decision support system, very few studies have focused on the farmer's intention and initial decision to adopt. Based on a survey of 394 smallholder farmers this study investigated Mexican farmers’ willingness to adopt an agricultural advice app. A Structural Equation Modelling approach, based on the Unified Theory of Acceptance and Use of Technology (UTAUT) was applied. To understand farmers’ adoption decision, extended constructs were studied (e.g. mastery-approach goals) along with farmers’ age and participation in an innovation hub. Results showed that the intention to adopt the app is predicted by how farmers believe that technical infrastructure exists and by the expectation of the farmers using the app to acquire new knowledge. The multi-group analysis revealed that performance expectancy is a relevant predictor of the intention to adopt, whereas the mastery-approach goal is relevant only for younger and farmers not connected to the innovation hub. The results may well be a baseline to research further suitable non-financial incentives for different farmers’ groups, then encourage initial adoption and enhance uptake. The findings are useful for practitioners and app developers designing digital decision support tools.

The study explored the contribution of ICT-based information sources to market participation among smallholder livestock farmers. Use of ICTs is considered paramount for providing smallholder farmers with required market information, in order to reduce market asymmetries. A Double Hurdle regression was utilized to analyze data collected from 150 smallholder livestock farmers in the study area. The results show that while use of ICT-based market information sources significantly influenced market participation, the effect of using ICT-based information sources on intensity of market participation was not significant. Other variables shown to influence both market participation and the intensity of market participation were age, additional income and membership of farmer cooperatives. This suggests the need to also consider other associated factors in the application of interventions which utilize ICT-based information sources in achieving planned market interventions.

Risk attitudes are relevant factors affecting the production and investment decisions at farm level. They are key factors that are related to farmers’ attitudes towards environment and climate change. Several methodological approaches are available to measure the level of stated risk of an economic agent. The Multiple Price List (MPL) method is one of the methods that is gaining relevance. In this study we apply the MPL and relate the risk outcomes with farmers’ characteristics and their perception towards environment and climate change. Data was collected using a face to face survey carried out for a group of 370 agricultural producers of the irrigation district located in northwest of Mexico. Results showed an average risk of about 0.32, locating the agricultural producers of the region in a group with risk aversion, according to the MPL scale. The heterogeneity analysis showed that the socioeconomic factors and the perceptions towards climate change are related to the farmers´ stated risk level. Farmers who are young women with propensity to use public support to invest were shown to be greater risk lovers. Farmers in the region have perceived climate change to a greater extent like floods, hail, diseases and pests, and changing vegetation.

One of the most important agrotechnical factors that influence the growth conditions of crops is plant density. Alterations in habitat conditions result in the emergence of phytophagous organisms, whose development is closely associated with host plants. The objective of this study was to assess the abundance and species composition of thrips (Thysanoptera) collected in soybean plants of different varieties cultivated under different plant arrangements (row spacing, number of seeds sown differed). The research was conducted at two locations in southwestern Poland between 2015 and 2018. The herbivores that inhabit plants were caught using an entomological net. The experiments were carried out using the complete randomised block design, with four replications. Regardless of location and treatment, thrips were the most numerous group of pests. Thrips tabaci and T. fuscipes were the dominant species within the collected material. A total of 24 species of thrips were identified and their dietary specialisation was determined. The assemblages of studied insects were also analysed due to the density of the plants and the stage of development. The increase in the sowing density of soybean (90 seeds per m2) resulted in a greater total number of thrips compared to a lower sowing density (50 seeds per m2). The number of thrips significantly increased during the flowering period and shortly after the flowering time, which made them a significant threat to the plants. Therefore, it is crucial to develop innovative pest management strategies tailored to effectively grow soybean to mitigate potential pest-related challenges.

Adlay seed samples were collected from 3 adlay growing regions (Yeoncheon, Jeonnam and Eumseong regions) in Korea during 2012. Among all the samples collected, 400 seeds were tested for fungal occurrence by standard blotter and test tube agar methods and different taxonomic groups of fungal genera were detected. The most predominant fungal genera encountered were Fusarium, Phoma, Alternaria, Cladosporium, Curvularia, Cochliobolus and Leptosphaerulina. The occurrence of Fusarium species were 45.6% and based on the combined sequences of two protein coding genes, EF-1a, Beta-tubulin and phylogenetic analysis, 10 species were characterized as F. incarnatum (11.67%), F. kyushense (10.33%), F. fujikuroi (8.67%), F. concentricum (6.00%), F. asiaticum (5.67%), F. graminearum (1.67%), F. miscanthi (0.67%), F. polyphialidiom (0.33%), F. armeniacum (0.33%) and F. thapsinum (0.33%). The ability of these isolates to produce mycotoxins fumonisin (FUM) and zeralenone (ZEN) were tested by ELISA quantitative analysis method. The result revealed that fumonisin (FUM) was produced only by F. fujikuroi and zeralenone (ZEN) by F. asiaticum & F. graminearum. Mycotoxigenic species were then examined for their morphological characteristics to confirm their identity. Morphological observations of the species correlated well with their molecular identification and confirmed as F. asiaticum, F. fujikuroi and F. graminearum.

This paper aims to show that sustainable behavior by firms may be impaired by regulatory restrictions. We challenge the assumption that regulation aimed at curbing greenhouse gas emissions (GHG) on the form of a target to meet the Country’s GHG emissions commitments will promote sustainable corporations. We argue that, in fact, such regulation may impair sustainability practices because it creates unintended consequences. This paper tackles the efficiency of the institutional framework chosen through the lenses of the analytical themes of fit, scale and interplay, then we use a systems dynamic approach to represent how regulation in the arenas of energy efficiency and GHG emissions reduction may withhold competitive business outcomes and corporate sustainability schemes. We exemplify and simulate a single regulation scheme and found that as a result of the institutional scheme chosen, the system is dominated by negative feedback processes resulting in lesser outcomes that would be better tackled by firms not being subject to the restrictions imposed by the regulation.

Like the most of crops, especially sugarcane needs to be kept upright until it is harvested. Because, lodging of sugarcane has a significant negative effect on cane yield and sugar content of sugarcane. To keep sugarcane upright earthing up is an utmost intercultural operation. In Bangladesh, most of the operations for sugarcane cultivation including earthing up are generally done in traditional method using human labor which increases production costs as well as reduces the income of sugarcane growers. So, a cost effective two-wheeled tractor (2WT) mounted earthing up machine was developed in Bangladesh Sugarcrop Research Institute (BSRI), Pabna to reduce drudgery and cost of sugarcane production. Field tests were conducted in experimental sugarcane field at BSRI and technical and economic performances of the developed earthing up machine were also carried out based on the field test. Average effective field capacity and field efficiency were found 0.16 ha/hr and 77.41 %, respectively for the developed earthing up machine. The earthing up machine was not found economically viable when it is used only for earthing up operation. Besides, when the 2WT was being used as the main driver for other activities including earthing up operation, then the earthing up machine becomes economically beneficial with net cash flow, net present value, internal rate of return, benefit-cost ratio and payback period of BDT 148497/ha, BDT 23184, 3%, 3.81:1 and approximately 1 year, respectively. On the contrary, considering cost of only earthing up tool without 2WT, then it was found economically beneficial with net cash flow, internal rate of return, net present value, benefit-cost ratio and payback period of BDT 16428/ha, BDT 3053, 4.7%, 2.71:1 and approximately 2 years, respectively. Since 2WT is commonly used for versatile farming purposes. Therefore, versatile use of 2WT as prime mover for other machines including earthing up machine can make earthing up machine economically viable and beneficial for sugarcane growers.

Due to the prospective local and international markets, the neon tetra fish breeding industry has its own allure for fish lovers and as a side business. The goal of the study was to analyze the opportunities and difficulties associated with neon tetra fish farming in order to build a "Blue Economy" policy. The Depok City Food Security and Fisheries Service (DKP3) program was implemented with the help of key informants who were chosen based on the following criteria: 1) DKP3 Officials, such as the Board of Trustees of the Fish Farming Group (POKDAKAN), 2) Researchers from the BRBIH (Ornamental Fish Farming Research Center), 3) Practitioners/Extension Workers, and 4) POKDAKAN.The study's conclusions state that the relevant Dinas must support local policies based on natural identification that are strengthened at the national level, that routine human resource training needs to be improved, that technology needs to be taken into account in collaboration with the private sector, and that post-harvest and market access are essential for industry. The SWOT analysis's findings, which are in quadrant 1, show that the firm is in a position for rather aggressive expansion.

High efficacy LED lamps combined with adaptive lighting control and greenhouse integrated photovoltaics (PV) could enable the concept of year-round cultivation and become a feasible option even in the harsh climate of the Nordic countries. Meteorological satellite data of this region was analyzed in a parametric study to evaluate the potential of these technologies. The generated maps showed monthly average temperatures fluctuating from -20°C to 20°C throughout the year. The natural photoperiod and light intensity also changed drastically, resulting in monthly average daily light integral (DLI) levels ranging from 45-50 mol·m-2·d-1 in summer and contrasting with 0-5 mol·m-2·d-1 during winter. To compensate, growth room cultivation independent from outdoor conditions could be used in winter. Depending on the efficacy of the lamps, the electricity required for sole-source lighting at 300 µmol·m-2·s-1 for 16 hours would be between 1.4 and 2.4 kWh·m-2·d-1. Greenhouses with supplementary lighting could help start the cultivation earlier in spring and extend it further into autumn. The energy required for lighting highly depends on several factors such as the natural light transmittance, the light threshold settings and the lighting control protocol, resulting in electric demands between 0.6 and 2.4 kWh·m-2·d-1. Integrating PV on the roof or wall structures of the greenhouse could offset some of this electricity, with specific energy yields ranging from 400 to 1120 kWh·kWp-2·yr-1 depending on the region and system design.

In Ethiopia, bamboo thickets and woodlands play an important role in soil-water conservation and climate change mitigation in arid and semi-arid regions. However, bamboo mass flower-ing, rapid demographic changes and expansion of agricultural investments to bamboo domi-nated areas have led to deforestation and land degradation. In this study, we determined the effects of deforestation and subsequent cultivation on soil physical and chemical properties along a chronosequence of closely located agricultural lands with different ages (1, 3, 5 and 7 years) since converted from natural lowland bamboo forest. Hence, soil samples (n = 90) have been taken from both natural bamboo forests and adjacent agricultural lands at two soil depths (0-20 cm and 20-40 cm). Our result showed that CEC, K+, Ca+, Mg+ and available P were varied significantly with respect to cultivation periods and soil depth, while soil pH and Na+ varied with soil depth (P < 0.001). Soil C and total N contents (g/kg) in 0-20 cm soil layer declined significantly and exponentially with increasing years under cultivation. Conversion of natural bamboo forest to cropland during the past seven-year period significantly increased soil pH with soil depths, while CEC was declined throughout the cultivation period and soil depth. In general, the result revealed that conversion of natural lowland bamboo and subsequent cultivation of soil had negative effects on measured soil physicochemical properties.

Colombia is the world's leading producer of mild washed arabica coffee and produces 12.6 million bags of green coffee, but at the same time 784,000 tons of waste biomass are dumped in open fields, of which only 5% is recovered or used. The objective of this project was to evaluate the production of platform chemicals from these coffee wastes. To achieve this, biomass characterization was carried out using proximate analysis, ultimate analysis and structural analysis. Hydrothermal valorization was carried out at a temperature range of 120-180 °C (LHW) and 180-260 °C (HTC) for one hour, the platform chemicals obtained were quantified by HPLC-IR, monitored by pH and conductivity, and the solid fraction was characterized by monitoring the functional groups in IR spectroscopy, and elemental analysis. Hydrolysis processes were obtained from 150 °C, production of platform chemicals from 180 °C and maximum concentration at 180 °C-4h, over 200 °C degradation of the products in the liquid fraction starts to take place. Homogeneous basic and acid catalysts were used to improve the yields of the reaction. The kinetics of the hydrolysis of lignocellulosic structures to sugars were also analyzed and described, and reaction orders of 1 (LHW), 3 (HTC) and their respective reaction rate equations were reported.

Escherichia coli (E. coli) is a common pathogen in veterinary clinical infections, typically not causing disease. However, under certain conditions, it can cause severe diarrhea, septicemia, and respiratory infections in domestic animals. Here, we report a large-scale mortality event in young donkeys, caused by E. coli infection in a farm with a herd of 340 donkeys, of which over 100 were under 4 months old. The characteristics of the E. coli strain were determined through clinical observation, complete blood count, blood biochemical analysis, H&E staining, histopathological examination, 16S rRNA analysis, and antibiotic sensitivity testing. A mice experiment using the isolated bacteria was also conducted, resulting in the onset of clinical and pathological symptoms similar to those observed in the donkeys. Molecular Evolutionary Genetic Analysis (MEGA) showed that the isolated bacteria, named CEG-GZL20, shared 99.98% sequence identity with E. coli. CEG-GZL20 exhibited high antibiotic resistance and only showed sensitivity to two antibiotics, Tetracycline and Gentamicin. As E. coli is a key component of the gut microbiota, responsible for digestion, nutrient absorption, and immune health, diseases and mortality caused by E. coli have significant implications for animal husbandry and human health.

Irrigation is one of key agricultural management practices of crop cultivation in the world. Irrigation practice is traceable on satellite image. Most irrigated area mapping methods were developed based on time series of NDVI or back scatter coefficient within the growing season. However, it found the winter irrigation out of growing season is also dominating in north China. This kind of irrigation aims to increase the soil moisture for coping with spring drought, and also reduce the wind erosion with the wet soil in the field surface as the strong wind happens in spring. This study developed a remote sensing-based classification approach to identify irrigated fields with Radom Forest algorithm out of growing season. The results showed that the mean of the highest accuracies of 7 RF models was 94.9% and the mean of the averaged accuracies of 7 RF models was 94.1%; the overall accuracy for all 7 outputs was in the range of 86.8-92.5%, Kappa in the range of 84.0-91.0% and F-1 score in the range of 82.1-90.1%. These results showed that the classification was acceptable and not over performed as the accuracies of all classified images were lower than the models. This study also found that irrigation started to apply in early November and irrigated fields were increased and suspended in December and January due to freeze. The newly irrigated fields were found again in March and April when the temperature goes up above zero degree. The area of irrigated fields in the study area were increasing over time with sizes of 98.6, 166.9, 208.0, 292.8, 538.0, 623.1, 653.8 km2 from December to April, accounting for 6.1%, 10.4%, 12.9%, 18.2%, 33.4%, 38.7%, and 40.6% of the total irrigatable land in the study area, respectively.

Welcome to the world of bioethanol revolution, in response to the soaring global energy demand, the production of bioethanol has taken center stage, captivating the attention of governments, academia, and the private sector alike. Over the years, research in this field has witnessed exponential growth, paving the way for sustainable energy production. Ethanol, the front-runner in renewable energy, can be derived from a plethora of sources. In this abstract, we will explore the exciting advancements and emerging trends in the production of bioethanol, shedding light on the promising future of sustainable energy. Bioethanol production presents a cost-effective solution by utilizing the abundance of agricultural resources. These resources serve as the foundation for producing bioethanol from various biomass sources. In this context, we evaluate the raw materials used, including sucrose-based, starchy-based, and perennial grasses. By exploring these options, we can gain a comprehensive understanding of the diverse range of agricultural feedstocks that contribute to the production of bioethanol, this paper delves into the multiple processes involved in the production of bioethanol from agricultural base biomass, unveiling a range of possibilities for harnessing renewable energy. The key steps that were thoroughly examined include pretreatment, which encompasses both physical and chemical methods, hydrolysis, direct fermentation, and saccharification. These steps serve as crucial components in the overall bioethanol production process from agricultural base biomass. By understanding and optimizing each of these stages, we can unlock the full potential of sustainable energy generation. The paper goes beyond exploring the production processes and delves into the different generations of bioethanol, each with its unique components. Additionally, it provides a comprehensive overview of the composition of agricultural and forest residues, shedding light on their potential as valuable resources for bioethanol production. Moreover, it highlights the significance of the agricultural sector in Nigeria's economy, emphasizing the importance of energy for enhancing productivity and efficiency. The integration of bioethanol as an energy source has the potential to propel this sector forward, fostering sustainable development and contributing to the overall growth of the Nigerian economy. By harnessing the power of bioethanol, Nigeria can tap into its energy potential, promoting energy utilization and creating a positive impact on various industries.

Apis cerana and Apis mellifera, are very important honey species for agriculture in Asian countries. In recent decades, A. cerana populations have sharply declined in all Asian countries as a result of Sacbrood Virus infection and have now recovered to their original size. It can change the genetic structure of local populations of A. cerana. We used the nuclear gene Vitellogenin VG to assess the genetic structure of local populations of A. cerana and the signature of adaptive selection. We performed a population genetic analysis of the honey bees A. cerana from South Korea in comparison with A. cerana samples from Russia, Japan, Nepal, and China. The sequences of the gene VG of a closely related honey bee species, A. mellifera, from India and Poland were used as outgroup samples. A comparative analysis of northern and southern A. cerana populations was performed. The signatures of positive adaptive selection were found in the local population of A. cerana. We performed the Tajima's neutrality D test for A. cerana populations from different local populations based on the gene VG exon sequences. All A. cerana populations showed signs of population size expansion following the possible recent decline in population sizes. The local populations of A. c. koreana were subdivided according to their geographical distribution into southern, northern, and central Korean clusters. The gene VG exon sequences can be used as informative markers for monitoring the changes in genetic structure and adaptation to the environment processes in A. cerana populations.

This study identifies the optimal management policy of a given energy storage system (ESS) installed in a grid-connected wind farm for maximizing the monetary benefits and provides guidelines for defining the economic value of the ESS under the optimal management policy and selecting the optimal size of the ESS based on the economic value. Considering stochastic models for wind power and electricity price, we develop a finite-horizon periodic-review Markov decision process (MDP) model to seek the optimal management policy. We also use a simple optimization model to find the optimal storage capacity and charging/discharging capacity of the ESS. By applying our analytic approach to a real-world grid-connected wind farm located in South Korea, we verify the usefulness of this study. Our numerical study shows that the economic value of the ESS is highly dependent on the management policy, wind electricity variability, and the electricity price variability. Thus, the optimal size of ESS should be carefully determined based on the locational characteristics and management policy even with limited investments. Furthermore, this study provides a meaningful policy implication on how much a subsidy the government should provide for installing ESS in a wind farm.

Packaged water consumption has grown rapidly in urban areas of many low and middle income countries, but particularly in Ghana. However, the sources of water used by this growing packaged water industry and its implications for water resource management and transport-related environmental impacts have not been described. This study aimed to assess the spatial distribution of regulated packaged water production in Ghana, both in relation to demand and for natural mineral water, to hydrogeological characteristics. 764 addresses for premises licenced to produce packaged water from 2009-2015 were mapped and compared to regional sachet water consumption and beverage import/export data examined. We find evidence to suggest packaged water is transported shorter distances in Ghana than in developed countries. For natural mineral waters, producers should be able to address the most widespread water quality hazards (including high salinity, iron and nitrates) in aquifers used for production through reverse osmosis treatment. The study suggests there is scope to integrate beverage product and groundwater regulatory databases to support groundwater management.

When overhead lines are impacted by lightning, the traveling wave of the fault contains a wealth of fault information. The accurate extraction of feature quantities from transient components and their classification is fundamental to the identification of lightning faults. The extraction process may involve modal aliasing, optimal wavelet base issues, and inconsistencies between the lightning strike distance and the fault point, which have the potential to impact the effectiveness of recognition. This paper presents a method for identifying lightning strike faults by utilizing Kullback-Leibler (KL) divergence enhanced Variational Mode Decomposition (VMD) and Symmetric Geometry Mode Decomposition (SGMD) improved with Permutation Entropy (PE) to address the aforementioned issues. A model of a 220 kV overhead line is constructed using real faults to replicate scenarios of winding strike, counterstrike, and short-circuit. The three-phase voltage is chosen and then sub-jected to Karenbaren decoupling in order to transform it into zero mode, line mode 1, and line mode 2. The zero mode voltage is decomposed using KL-VMD and PE-SGMD methods, and lightning identification criteria are developed based on various transient energy ratios. The research findings demonstrate that the criteria effectively differentiate between winding strike, counterstrike, and short-circuit faults, thus confirming the accuracy and efficacy of the lightning fault identification criteria utilizing KL-VMD and PE-SGMD.

Digital Image Correlation (DIC) is an optical technique used to measure surface displacements and strains in materials and structures. This technique has demonstrated significant utility in structural examination and monitoring. This manuscript offers a comprehensive review of contemporary research and applications that have leveraged the DIC technique in laboratory-based structural tests. The reviewed works encompass a broad spectrum of structural components, such as concrete beams, columns, pillars, masonry walls, infills, composite materials, structural joints, steel beams, slabs, and other structural elements. These investigations have underscored the efficacy of DIC as a metrological instrument for precise quantification of surface deformation and strain in these structural components. Moreover, the constraints of the DIC technique have been highlighted, especially in scenarios involving extensive or complex test configurations. Notwithstanding these constraints, the DIC methodology has validated its effectiveness as a strain measurement instrument, offering numerous benefits such as non-invasive operation, full-field measurement capability, high precision, real-time surveillance, and compatibility with integration into other measurement instruments and methodologies.

Jalapeño peppers (Capsicum annuum L.) are an important agricultural product worldwide. Despite its high demand in recent years, there are few studies on its production under adverse conditions caused by environmental phenomena. Crops in protected environments such as aeroponics offer greater control of these phenomena and enable efficient use of resources. However, it is necessary to validate the cultivation technique for which new technologies are being used. One of these is the analysis of images captured in the visible and near and far infrared spectrum which involves using non-invasive techniques in order to characterize the growth of a plant and diagnose if it presents any type of stress. This study presents the characterization of vegetative growth and fruiting of jalapeño pepper plants in an aeroponic system, where the root, leaf development parameters and fruits were measured in four jalapeño pepper crops through images of plants captured in the visible (VIS), near infrared (NIR) and far infrared (IR) spectrums. Four crops of thirty jalapeño pepper plants were sown to obtain a total of one hundred and twenty plants which were characterized in the different phases of growth and fruiting. Each of the four jalapeño pepper crops were monitored for sixty days in an aeroponic system in a greenhouse. The first crop was intended to carry out tests to establish the appropriate fertigation times, the next three crops were grown under favorable conditions. Algorithms were developed in Matlab to obtain, over ten image capture sessions, the morphometric and thermal parameters of the roots (perimeter, area, length and average temperature), plants (perimeter, area, height and average temperature), and fruiting. (yield and number of fruits). The statistical analysis was carried out using the ANOVA and Tukey tests considering a value of p ≤ 0.05. The results obtained indicate that there is no significant difference between the characterizations of the four crops. This statement is also supported by the visual analysis of the growth curves parameters of the four crops. In addition, the temperature inside the aeroponic system was contrasted with the ambient temperature and it was verified that the temperature to which the roots are exposed was in the range of 10°C – 20°C. The thermal analysis determined that a plant that presents water stress and is also exposed to high temperatures has an average leaf temperature of 3.7 to 5 °C above the optimal condition for the plant, while a plant with stress at normal temperatures was 1.3 °C higher than the plant without stress.

In recent years, the interest in increasingly sustainable agriculture has also turned attention towards new crops which could enter the food chain as new protein and oil sources or that can be used as new cover crops. In this scenario, Camelina sativa is a perfect crop to study. Camelina is an annual herbaceous plant belonging to the Brassicaceae which is interesting for its oil content, since the seeds contain about 40% of oils, with a high level of polyunsaturated fatty acids (30-40% alpha linolenic acid, 15-25 % linoleic acid, 15% oleic acid and about 15% eicosenoic acid). It is a hexaploid species (2n = 40, genome size ~782 Mb) characterized by rapid growth, short life cycle (85-100 days for spring varieties, 190-210 for autumn varieties) and low input cultivation needs. All these traits make it suitable for use in marginal areas. However, its use in feed and food is limited by the presence of glucosinolates (GLS). GLS are sulfur molecules involved in plant defense. In recent years, they have been studied not only as anti-nutritionals, but also for their anti-carcinogenic effects against chronic inflammatory and heart diseases and for their use as natural pesticides. Given the recent interest in camelina and its highly nutritious oil, eight pure lines and a synthetic population were compared in two different growing periods, spring and winter. In this work, the genetic materials were characterized for different phenotypic traits, yields and yield components, bromatological and glucosinolate content. The results confirmed that in North Italy camelina has higher yields if cultivated in the autumn-winter period (about 2 t/ha vs 0.6 t/ha), furthermore, a negative correlation was found between spring and winter yields, indicating that varieties that produce more in winter cultivation produce less in spring cultivation. Moreover, to our knowledge, it is the first work in which a synthetic population of Camelina sativa has been tested and proved to be a valid solution for use in various environments both for its adaptability and for the low content of glucosinolates (about 17 mmol/ kg).

The present study analyzed the effect of temperature, pH, retention time, pretreatment and mixing ratio on the anerobic digestion process. The parameters during the anaerobic co digestion of cow manure and food waste were then optimized using the Taguchi experimental design method. ANOVA is carried out to find the significant parameters which influence the biogas production. Experimental tests were carried out at laboratory scale reactors kept at different temperatures (28 °C, 35 °C, and 50 °C). The specific methanogenic Performance (SMP) during anerobic digestion at higher temperatures was characterized with the analysis of acetate, propionate, butyrate, hydrogen, glucose, and formate. The improvement of biogas production with different pre-treatment i.e., ultrasonic, autoclave, and microwave techniques also analysed. The results showed that reactor that maintained at 35 °C showed the highest biogas production. While the reactor that maintained at lower temperature (28 °C) produced the lower volume of biogas. As the retention time increases, the amount of biogas produced increases. Methanogenic activities of microorganisms reduced at higher temperature conditions (65 °C). Biogas production increased by 28.1%, 20.23%, and 13.27 % when the of substrates treated with ultrasonic, autoclave, and microwave, respectively, compared to the untreated substrate. The optimized condition for the highest biogas production during anaerobic co digestion of food waste and cow manure is temperature of 35 °C, pH of 7 and mixing ratio (CM: FW=1.5:0.5). ANOVA showed that temperature is the most important input parameter affecting biogas production, followed by mixing ratio.

This study explores the efficacy of using EEG-based parameters to diagnose bipolar disorder. A synthetic dataset was generated, including both correctly diagnosed and misdiagnosed cases, simulating realistic clinical conditions. EEG features such as theta-alpha mean, beta band mean, and coherence measures were used to train a multi-layer perceptron (MLP) model. The model achieved a validation accuracy of 92%, demonstrating strong potential for EEG-based diagnostics. However, challenges such as standardization of electrode configurations and addressing equipment differences are crucial for broader applicability and validity of the findings in diverse clinical settings.

A key component of nanomaterials, carbon dots (CDs) are zero-dimensional solids, smaller than 10 nm in size that include carbon as their backbone structure. Herbal medicine carbon dots (HM-CDs) are nanoparticles developed from medicinal plants. Owing to their advantageous properties, they are extensively employed in biological domains such as drug administration, bio-imaging, biosensors, and DNA interactions. It's interesting to note that, carbon dots pro-duced from herbal medicines as a raw material have surfaced as the most recent addition to the CD family. This article provides an overview of the several sources of green precursor, preparation tech-niques, characterization, and applications of CDs. It reviews recent advancements in synthe-sizing CDs made from green carbon materials and their potential uses as bioimaging, catalysts and sensing. Furthermore, several difficult issues and future directions for this potent and amazing content are also covered.

Pregnant women have been considered a high-risk group for SARS-CoV-2 infection; the impact of the disease on the health of a mother and her child is still being studied. The emotional impact of the pandemic on pregnant women has been extensively studied. Emotional distress is proposed as a perspective to explain the emotional manifestations of women during this stage as something common rather than pathological. The objective of this study was to know the emotional experience of women who tested positive for SARS-CoV-2 towards the end of their pregnancy, during the first and second waves of COVID in Mexico. A qualitative study was carried out: 18 pregnant women with COVID were interviewed. A thematic analysis of the data was performed, resulting in three main themes and 14 subthemes. The COVID-infected mothers-to-be experienced mild to moderate emotional distress. It was more intense for those with comorbidities. This distress was aggravated during obstetrical complications and comorbidities, as well as during COVID and postpartum. The emotional distress was appeased by both the perception of medical care and social support. The emotional distress of pregnant women with COVID requires emotional accompaniment to reduce its impact.

Metaheuristic algorithms are widely used as optimization methods, due to their global exploration and exploitation characteristics, which obtain better results than a simple heuristic. The Stochastic Fractal Search (SFS) is a novel method inspired by the process of stochastic growth in nature and the use of the fractal mathematical concept. Considering the chaotic-stochastic diffusion property, an improved Dynamic Stochastic Fractal Search (DSFS) optimization algorithm is presented. The DSFS algorithm was tested with benchmark functions, such as the multimodal, hybrid and composite functions, to evaluate the performance of the algorithm with dynamic parameter adaptation with type-1 and type-2 fuzzy inference models. The main contribution of the article is the utilization of fuzzy logic in the adaptation of the diffusion parameter in a dynamic fashion. This parameter is in charge of creating new fractal particles, and the diversity and iteration are the input information used in the fuzzy system to control the values of diffusion.

Cambodia is a predominantly agrarian society, with a majority of the population residing in rural areas and relying on agriculture for food and income. The primary sources of food for the Khmer society are rice and fish. However, the country faces vulnerabilities due to climate change, natural disasters, impacts of hydropower and infrastructure development, and land grabs, which disrupt food sources and the livelihoods of local communities. Since 2015, the Royal Government of Cambodia (RGC) has been actively promoting rice production for export, resulting in increased rice farming seasons and annual rice production. Despite these efforts, a significant portion of the population still experiences food insecurity. Therefore, this study aims to explore the reasons why food security issues persist despite the government program to increase rice production. The study involves a review of existing literature and an examination of food security in three provinces in the Cambodian Mekong Delta. It concludes that, on the one hand, the increased rice production has increased food availability, but access to and utilization of food have been challenged by indebtedness, increased cost of production and migration, and on the other hand, the rights to foods have been challenged by land crabs, water conflicts, and lack of sectoral integrations of food systems; and compounded by climate change and environmental degradation, which all contribute to food security.

People are increasingly encouraged to reduce animal food consumption and shift towards plant-based diets, however the implications for children’s health are unclear. In this narrative review of research in high-income settings, we summarize evidence on the increasing consump-tion of plant-based diets in children, and update an earlier systematic review regarding their associations with children’s health outcomes. The evidence indicates that vegan but not vege-tarian diets can restrict growth relative to omnivorous children, and increase the risk of being stunted and underweight although the percentage affected is relatively small. Bone mineral content is reduced in vegetarian and especially vegan children, compared to omnivores. Both vegetarian and vegan children who do not use vitamin B12 supplements manifest with B12 defi-ciency, however supplementation rectifies this problem. Both vegetarians and vegans have lower concentrations of 25 (OH)D if unsupplemented, and lower body iron stores, but usually have normal iron metabolism markers. Both groups are at risk of iodine deficiency and this might affect thyroid health. Children consuming a vegan diet have more favorable lipid profile than omniv-orous children, however the results for vegetarian diet are inconsistent and vary by outcome. Based on the same scientific evidence, national and international dietary recommendations are heterogeneous, with some countries supporting plant-based diets among infants, children and adolescents, and others discouraging them. We offer a research roadmap, highlighting what is needed to provide adequate evidence to harmonize dietary recommendations for plant-based diets in children. A number of measures should urgently be introduced at international and na-tional levels to improve the safety of their use in children.

The aim of the study was to evaluate the effect of crude protein (CP) levels in concentrate and Sesbania grandiflora pod meal (SG) supplementations on feed intake, rumen fermentation, and methane (CH4) mitigation in Thai purebred beef cattle. Four cattle with 100 ± 5.0 kg body weight were used in this study. A 2 × 2 factorial experiment in a 4 × 4 Latin square design were conducted, in which factor A was the CP contents in concentrate of 14, and 16% of dry matter (DM) and factor B was the supplement contents of SG at 0.4% and 0.6% DM intake, respectively. The results showed that the CP contents in concentrate and SG had no interaction effect on intake, digestibility, ruminal ecologies, ruminal fermentation products, and nitrogen utilization. Increasing CP contents in concentrate did not influence DM intake and nutrients’ digestibility, and SG supplementation at 0.6% significantly (P<0.05) decreased CP digestibility. Increasing CP content to 16% increased significantly (P<0.05) the ruminal ammonia nitrogen (NH3-N) concentration while decreased significantly (P<0.05) the NH3-N concentration, protozoal number, and blood urea nitrogen (BUN) at 4 h post-feeding. The 0.6% supplementation of the SG increased significantly average total volatile fatty acids (VFAs) and propionate (C3) concentration while decreased significantly average acetate (C2), C2:C3 ratio, and CH4 production, which was 2.71% for C2, 13.17% for C2:C3 ratio, and 4.37% for CH4 production lower than 0.4% supplementation. Fecal nitrogen excretion was significantly decreased when supplemented with 0.6% of the SG. In conclusion, 0.6% of the SG supplementation showed a greater effect on intake, rumen manipulation, and CH4 mitigation and would recommend supplementation to a concentrate-based diet containing either 14% or 16% CP content.

An upsurge in global population over the years and rapid urbanization have accelerated huge dependence on petroleum-derived fuels and consequent environment concerns owing to green-house gas emissions in the atmosphere. An integrated biorefinery uses lignocellulosic feedstock as raw material for the production of renewable biofuels, and other fine chemicals. The sustain-able bio-economy and the biorefinery industry would benefit greatly from the effective use of lignocellulosic biomass obtained from agricultural feedstocks to replace petrochemical products. Lignin, cellulose, hemicellulose, and other extractives, which are essential components of ligno-cellulosic biomass, must be separated or upgraded into useful forms in order to fully realize the potential of biorefinery. The development of low-cost and green pretreatment technologies with effective biomass deconstruction potential is imperative for an efficient bioprocess. The abun-dance of microorganisms along with their continuous production of various degradative en-zymes makes them suited for the environmentally friendly bioconversion of agro-industrial wastes into viable bioproducts. The present review highlights the concept of biorefinery, ligno-cellulosic biomass and its valorization by green pretreatment strategies into biofuels and other biochemicals. The major barriers and challenges in bioconversion technologies, environmental sustainability of the bioproducts and promising solutions to alleviate those bottlenecks are also summarized.

Background: Strongyloidiasis, a neglected disease caused by intestinal nematodes of the genus Strongyloides, is endemic to tropical and subtropical areas such as Vietnam. The morphological diagnosis of larvae by Hara Mori culture technique and microscopicare are considered the standard diagnostic procedures in the endemic areas of Strongyloides spp. However, they could only identify the genus, not the species of Strongyloides. DNA-molecular techniques which are highly sensitive and more cost-effective have been increasingly utilized in detection of Strongyloides species. This study aims to determine prevalence and the species of Strongyloides among resident population in Duc Hoa district, Long An province, Southern Vietnam. Methods: A cross-sectional study was conducted using 1,190 stool samples collected in Duc Hoa district, Long An province, Vietnam, from July, 2017 to November 2018. The stool specimens were transported to the Laboratory of Medical Parasitology, Pham Ngoc Thach University of Medicine within two hours of collection at an appropriate temperature of 25 oC. All samples were stored at 2 - 8°C and processed within 48 hours for microscopic examination. Molecular detection was carried out at Laboratory of Molecular Biology, Pham Ngoc Thach University of Medicine, Hochiminh city, VietNam. Results: Of the 1,190 samples tested, Strongyloides spp. larvae were detected in 79 specimens (6.6%) by two classical parasitological methods, namely direct microscopy and the modified Harada-Mori filter paper culture. DNA was extracted from 70 of the 79 samples of Strongyloides spp. larvae, which was subsequently characterized by real-time PCR amplification of the 18S and 28S regions of the rDNA gene. The results showed that 97.1% of the DNA samples were S. stercoralis, 2.9% were co-infections with S. ratti and S. stercoralis, and 2.9% belonged to S. ratti. For all 14 isolates, nucleotide sequencing was compared with other human pathogenic species of Strongyloides whose sequences are available in GenBank. The identity of 12/14 sequences were confirmed as S. stercoralis with a high level of similarity (91.3% - 100%) and over 98% for S. ratti. Between the two co-infection samples, the higher similarity belonged to S. stercoralis. Conclusion: A molecular amplification of small subunit ribosome RNA followed by sequence analysis has been proved to be a suitable method for discrimination of Strongyloides spp. retrieved from stool samples.

Agriculture and rural regions in Europe face a number of economic, social and environmental challenges. Rural areas are active players in the EU’s green transitions. Weeding is one of the most important factors of agricultural production. New weeding techniques are being developed to enhance sustainability. Among them laser based weeding seems a promising alternative for use of chemicals. WeLASER technique is a novel technique of weed control. Its successful implementation depends on many factors related to the innovation itself, policy context, farming conditions and users’ attitudes. Survey was carried out to provide the insight on the attitudes toward the innova-tive (laser) weed control tool (device - autonomous robot). The CATI method was selected for the survey of farmers opinion and carried out in three countries: Denmark, Spain and Poland. Statistical methods were applied to analyze the results. The study provided knowledge on how farmers see the barriers and opportunities of implementing the device in practice. Positive attitudes of farmers were observed but with high expectations related to quality of the technique and systemic conditions of its implementation.

Organic agriculture based on participatory guarantee system (PGS) has been promoted as a tool for sustainable ecosystem, self-reliance and poverty alleviation of smallholder farmers in Thailand. However, specific criteria are required to certify as organic products. In this paper, the researchers present the collaboration of smallholder farmers practicing organic farming based on participatory guarantee system in four Thai provinces: Nong Bua Lam Phu, Nakhon Phanom, Ubon Ratchathani and Nakhon Ratchasima. One hundred thirty-five smallholder farmers were purposively selected as the informants. In depth interviews were conducted to conceptualize. The participatory guarantee system management considering their diverse agricultural background and socio-economic conditions. Main findings concluded that motivations for PGS were restoration soil quality and decreasing yield. Key factors for sustainable adaptation are policy support in terms of financial measures and capacity building.

Machine Learning can be used for social good. In this paper, we discuss how it can be used to combat climate change and facilitate land management and farming in developing countries and in particular in Côte d’Ivoire. This paper explores models that improve land and water management and agricultural farming cultivation to contrast climate change. Côte d’Ivoire is the largest producer of cocoa beans (43%) in the world, but deforestation, lack of rainfall, drought, and climate change threaten crops and the already fragile economy of Ivorian farmers. It is important to combat climate change with methods and techniques that are affordable to the local farmers and also induce positive effects in production. We discuss the use of low-cost sensors to collect data on the soil and open data and open source software to develop AI tools. We show that using deep neural networks (YOLOv5m) is effective for detecting healthy plants and pods of cocoa from damaged ones only using mobile phone images. Focusing on a single land is not enough to combat climate change, which has different causes and involves also knowledge at a higher scale. We propose a new method of forecasting for the analysis of remote sensors. Remote sensor data come from GRACE NASA Mission and ERA5 produced by the Copernicus Climate Change Service at ECMWF. We implement a new deep neural network architecture named CIWA-net. It is based on a Fully Convolutional Neural Network (FCN) [ 1] and it is a U-net like architecture [2]. The aim of CIWA-net is to forecast Total Water Storage Anomalies (TWSA). We show the quality of our model with a comparison to a vanilla Convolutional Neural Network. CIWA-net could be used also for the detection of lands that interfere with agricultural work and yields, such as deserted areas, water-soaking soil areas, zones at risk of desertification, and poor land use. The employment of AI at the service of agriculture can decrease crop losses and waste, lower the inputs onto the soil of fertilizers, responsible for the increase of Greenhouse Gases. It could be useful to help the small farmers (at a local scale) and also the policy-makers and farmers’ cooperatives (at the regional scale) to take valid and coordinated countermeasures to improve the correct use of the lands, helping to contrast and adapt to climate change.

Manufacturing enterprises are increasingly compelled to pursue innovative solutions to environmental issues. Addressing such issues requires mindful leadership to support employees and organizations in maintaining awareness during complex situations, thereby promoting environmental sustainability. Drawing on social information processing theory, this study theorizes and tests the relationships mindfulness leadership, employee moral reflectiveness, environmental passion, and employee green creativity. To test the model, we utilize a two-wave multi-source dataset comprising 215 workers from manufacturing firms in China. The findings demonstrate that mindful leadership is positively related to employee green creativity. Additionally, our research reveals that both moral reflectiveness and environmental passion serve as mediators in linking mindful leadership to employee green creativity. Crucially, our empirical analysis suggests a serial mediation model, examining the sequential role of moral reflectiveness and environmental passion in the relationship between mindful leadership and employee green creativity. The findings provide a new viewpoint on employees' eco-friendly behaviors and have practical implications for improving environmental sustainability within organizations.

The high-quality development of the industrial software industry is of strategic significance to enhancing the core competitiveness of the manufacturing industry and promoting the high-quality development of China's industrial economy. By integrating the "capital- technology-environment-human" production factor theory and configuration perspective, this paper constructs a comprehensive analysis framework that drives the total factor productivity (TFP) of the industrial software industry. It uses 40 typical industrial software firms as case samples and uses fuzzy set Qualitative Comparative Analysis (fsQCA) was used to empirically explore the influencing factors and complex mechanisms that achieve high-quality development of the industrial software industry. It is found that: (1) a single industrial factor is hardly a necessary condition to drive industrial software industry; (2) there are four paths to achieve high TFP, which are summarized as "technology-human-environment" balanced driving type, "capital-human-environment" balanced driving type, "technology-capital" dual driving type, and "capital" single driving type. There are four driving mechanisms. There are also four not-high TFP configurations with asymmetric characteristics; (3) under certain conditions, the combination of capital factors, capital factors, environmental factors and human factors can drive TFP in a "all roads lead to Rome". In this process, the government's attention plays a more universal role. The study not only expands the application scenarios of fsQCA, but also provides decision guidelines for the practice of strategic emerging industrialization represented by industrial software industry.

As the oil industry increasingly turns to unconventional low-permeability and low-porosity reservoirs, precise post-fracture production prediction is a pivotal instrument in investment de-cision-making, formulation of energy policies, and promotion of environmental assessments. Nevertheless, despite extensive research spanning decades, the precise post-fracture production prediction based on logging parameters remains an intricate task. In this study, we gathered ex-tensive logging data and segmented the post-frac gas production during well testing on the first day to enrich the dataset. Nine pipelines were then architected using various techniques of data preprocessing, feature extraction, and advanced machine learning models. Hyperparameter op-timization was executed via the GridsearchCV. To assess the efficacy of diverse models, metrics including the coefficient of determination (R2), standard deviation (SD), and root mean square error (RMSE) were invoked. Among the several pipelines explored, the PS-NN exhibited excellent predictive capability in specific reservoir contexts (an R2 value of 0.94 and an RMSE of 48.15). In essence, integrating machine learning with logging parameters effectively assesses reservoir productivity at multi-meter formation scales. This strategy not only mitigates uncertainties en-demic to reservoir exploration but also equips petroleum engineers with monitoring on reservoir dynamics, thereby facilitating reservoir development. Additionally, this approach provides res-ervoir engineers with an efficient way of reservoir performance oversight.

Sustainable Development Goal 12 requires countries to achieve responsible consumption and production patterns without exceeding safe environmental limits for natural resource use. However, little is known about how cropland impacts from the agri-food sector contribute to the exceedance of national environmental limits for consumption and production. Using a multi-regional input-output model, we linked the cropland impacts of agri-food production to countries of consumption while considering the exceedance of production-based and consumption-based environmental limits. We defined national consumption-based environmental limits via the fair-share approach and quantified national production-based environmental limits according to the biophysical limit of available arable land. We then classified countries into quadrants according to their exceedance of consumption and/or production environmental limits. We found that the USA, Australia and other high-income countries were exceeding both consumption-based and production-based environmental limits. High-population but low-income countries such as India and China were within safe consumption-based environmental limits but exceeded production-based environmental limits. Brazil and other countries of the Americas incurred substantial environmental costs due to the conversion of forests into cropland to produce food for export. We identified patterns in international trade relationships that could inform national-level responsible agri-food consumption and production patterns across the global supply chain, thereby contributing to Sustainable Development Goal 12. More stringent regulations and commitments in national and international policies are required to reduce the exceedance of consumption-based and production-based environmental limits and avoid exceeding the global land-system change planetary boundary.

Working capital management (WCM) is critical because it affects a company's profitability, liquidity, and investment decisions, all of which have an impact on financial performance. As a result, effective and efficient working capital management is an essential component for commercial and service businesses. Given the importance of the commercial and services industries to the Kenyan economy, the goal of this research was to look into the impact of working capital management on the financial performance of these firms, particularly those listed on the Nairobi Securities Exchange (NSE), from 2003 to 2022. Working capital management was measured using the average age of inventory, average collection period, average payment period, and cash conversion cycle, whereas financial performance was measured using return on asset, return on equity, and net operating profit margin. Using panel regression analysis, the results showed that the average inventory age, average collection period, average payment period, and cash conversion cycle were all negatively related to financial performance for NSE-listed commercial and services firms. Based on the findings, it is recommended that Kenyan commercial and services firms adopt prudent optimal working capital management practices in order to improve firm financial performance and maximize shareholder wealth.

Integrated cultivation strategies can significantly improve rice yield. However, it is unclear how integrated cultivation practices improve soil microbial diversity and its related mechanism in rice field. Therefore, four integrated cultivation practices i.e., no N application (N0), local farmers’ practice (FP), high-yield and high-efficiency practice (HYEY), and super-high-yield cultivation practice, impacts on soil properties and structure composition of microbial community were explored. Compared with N0, SHY treatment, significantly increased soil alkaline nitrogen and organic matter contents. HYHE and SHY treatments significantly altered soil fungal community and Alpha diversity. Based on Venn diagram analysis, the composition of bacterial communities under all treatments was similar, but with different compositions of fungal communities. Cluster analysis indicates that the Proteobacteria was the absolute dominant group of bacterial communities, and Chloroflexi, Bacteroidetes, and Acidobacteria were the dominant group. Different cultivation methods also led to changes in the main factors affecting soil bacteria and fungi composition. Available potassium and organic matter were the main environmental factors that affected bacteria, with the strong of available potassium on the soil. To sum up, SHY and HYEY were beneficial management options in terms of improved soil fertility Alpha diversity of the soil bacterial community respectively.

This research presents a comparative analysis of the yield and nutritional quality of lettuce (Lactuca sativa L.) cultivated in an aeroponic system with two distinct nutrient solutions: (i) commercial hydroponic fertilizers and (ii) aquaponic water without added fertilizers. Both systems were maintained under the same controlled conditions, enabling the comparison of growth parameters, leaf area, antioxidant activity, mineral content, and sensory characteristics of the lettuce. The hydroponic system demonstrated superior performance concerning the fresh weight of lettuce head and root, leaf count, and leaf area. In contrast, the aquaponic system produced a higher dry weight of lettuce heads and a more extensive root-to-shoot ratio. Concerning nutrient concentration, the hydroponic nutrient solution composition exhibited elevated levels of NO3–, P, NH4+, and K in contrast to the aquaponic nutrient solution, which had a more significant S, Cl–, Na, and Mg content. Regarding the nutritional value, lettuce from the hydroponic system exhibited significantly higher levels of K, S, P, Zn, Fe, Mn, and vitamin B2. In contrast, lettuce from the aquaponic system exceeded with higher content of Ca, Na, Mg, Al, B, and Si. Remarkably, the lettuce cultivated in the aquaponic system demonstrated significantly enhanced total flavonoid and phenol content, and antioxidant capacity compared to its hydroponically grown counterpart.

The global steel industry is a major contributor to greenhouse gas emissions, and the adoption of green hydrogen in Direct Reduced Iron (DRI) production has the potential to significantly reduce CO2 emissions and support climate targets. This review explores the environmental, economic, technological, and social implications of using green hydrogen in DRI processes. The findings suggest that green hydrogen can reduce emissions by up to 90% compared to traditional methods, enhance energy security, and stimulate local economic development. However, high initial costs, energy efficiency concerns, and social acceptance issues remain significant barriers. The review also highlights the importance of integrating carbon capture and storage technologies, addressing logistical challenges, and considering the geopolitical implications of a shift towards green hydrogen. Green hydrogen presents a promising solution for decarbonising the steel industry but continued research, investment in infrastructure, and strategic planning are essential to overcome the challenges and drive widespread adoption.

This scientific paper explores the increasingly widespread use of collaborative robots in the industrial environment, highlighting them as a solution to challenges related to the high costs of human labour and the associated management difficulties. The authors focus on the process of defining requirements for the implementation of collaborative robots, providing strategies based on mathematical management models. This approach translates into significant benefits for companies, such as cost reduction, quality improvement, and increased operational efficiency. Additionally, the paper proposes an innovative mathematical model for assessing total costs, budgeting, profitability, and electric power consumption associated with the operation of collaborative robots. This model allows for a comparison between the costs involved in using human labour and those associated with collaborative robots, providing critical information for technological investment decisions. The efficiency of this mathematical model is demonstrated through a practical application, where collaborative robots were integrated into a production environment, and costs and efficiency were evaluated compared to the use of human labour. This scientific paper provides a systematic and efficient approach to implementing collaborative robots in industrial processes, benefiting from strategies based on mathematical management models and an original mathematical model for evaluating performance and associated costs.

Microalgae cultivation for biotechnological purposes is an expanding field. Their cultivation is usually performed on a liquid culture medium and require the presence of an energy source. Culture media are water-salt solutions containing nitrogen, sulfur, phosphate sources, with trace of transition metals. Light source supplies energy through photosynthesis process, resulting in metabolic reactions and cell growth. Thanks to the huge number of existing species and their diversity, it is possible to exploit alternative water sources with chemical and physical properties far from the commonly used freshwater media. Among these, oilfield or formation waters (AFW) are saline wastewater produced during oil drilling. They represent over 95 % of the total fluids collected from gas and oil wells during fuel extraction. This study exploits the adaptation capability of a Galdieria sulphuraria strain in different salinity conditions to build up a more feasible microalgae-based platform. Batch cultivation of G. sulphuraria was evaluated in a range from 0 to 20 g/L NaCl in terms of growth rate, metabolite content, photophysiology, and intracellular redox state. Moreover, the same strain has been tested for artificial formation water growth in semicontinuous cultivation mode. In these condition, NaCl preadaptation effect has been assessed too. Results clearly demonstrate that biomass composition is influenced from medium salinity. Strains preadapted in 0 to 20 g/L range of NaCl salinity show almost same cell growth profile and a slightly different ratio between lipids, carbohydrates, and proteins. Pigments content and photophysiology point out that variations of osmotic pressure and ionic strength in medium affect Photosystem II (PSII). Regulation of light harvesting is necessary to trigger metabolism shift toward synthesis of metabolites required in the adaptation process.

Durum wheat is an important staple food used to obtain several products. At first the wheat is milled to obtain different products: bran, semolina and flour. These products are the base of several artifacts with varying properties both from a nutritional point of view and flavoring characteristics. It is known that most elements concentrate in the outer layers of the wheat seed (pericarp and aleurone) so that the content of the elements vary a lot in the ground products. The present study investigates the characterizing elements of the milled products and the effect of cultivation protocol applied. We measured, by ICP-OES, the concentration of 28 elements in the whole seed and in any grinding products; the results show that only few elements characterize each product. Few elements, but different for each product, permit to disclose the kind of agri-cultural method used: organic or conventional protocol. Five elements: B, Cd, Cu, K, Se, are the most important to distinguish between organic and conventional agriculture by PCA and PLS analysis; these elements also permit some differentiation of products.

Disruptive technologies (DT) have featured prominently in almost every human activity since the advent of computerization. The likely effects of DT on economic processes and human professions have and continue to generate fears and debates which spurred this investigation. To break away from the traditional approach the operational breakeven theory and the discriminant analysis techniques of Altman’s Z-score, and Enyi’s Relative Solvency Ratio were used to examine the relationship between firms’ market-induced-survival-ratio (MISR) and the disruptive technology gains index (DTGI) of seventy-three firms drawn from Nigeria and India. Descriptive and inferential statistics were used to analyze the data generated. The results showed that a sizeable number of firms has profited from the introduction of disruptive technologies with MISR and DTGI returning a 10% significant relationship while others are still struggling to measure up to the requirements of disruptive technologies in their chosen economic fields. The implication of this is that businesses must brace up and embrace digital transformation if they must stay afloat in this era of disruptive technologies. This study recommends a revolutionary approach to digital transformation in view of the fast pace of global integration while managers and business owners should adopt more pragmatic approach in appraising the operations and finances of a firm for effective results and timely responses to potential business challenges.

This study's main target was to analyze and design rectangular edges supported two ways solid slabs by using ES EN 1992-1-1:2015. Slab design is often carried out either manually or with the use of design and analytic software. The researcher sees that some software cannot accept some countries' standard codes. For example, currently in Ethiopia analysis and design of two-way solid slab is done using readily available Excel sheet template. But working with this might have many problems, firstly the structure that is already analyzed by SAP or SAFE or any other international software application that uses international codes but which cannot design structure using ES EN 1992; for instant euro codes and designed by excel sheet can create failure and uneconomical analysis and design result. In this paper, the slab is designed and analyzed based on the chosen concrete grade, chosen reinforcement bar diameter, chosen steel grade for design and analysis of slabs calculations like load, moment, shear, and deflection checking using the moment coefficient method for analysis and design and Microsoft Visual Basic 2010 for coding. All input values are given by the International Standard units and are also used to represent output values. Using manual calculations delays time and mostly the result is not correct. But using this Computer program can increase computation accuracy and save time. The procedure the researcher followed is, first the manual calculation has been done and then SADSE2021 has been done. The result is that both are 99.9% identical, and the disadvantage of this method is that it cannot be used to determine the detailed drawing.

Worldwide, different strategies are elaborated in order to ensure optimum conditions for the development and growth of the economic competitiveness, but also for increasing the quality of life and environment protection. All these strategies are closely linked with the development and modernization of the systems for producing energy from clean and renewable sources. In this context, the present paper presents the results of the researches regarding the evaluation of the sustainability of the briquettes production, using the biomass resulted from vine winter pruning as raw material. An analysis of the scientific references indicates that nearly 8 Mt of biomass result from over 7.4 million hectares of vine plantations existent worldwide, biomass that could be valorized through densification in order to produce solid biofuels with a lower calorific value of more than 17 MJ·kg-1. When designing the scientific endeavor, the following aspects were considered: defining the aim and objectives of the research; design of the research algorithm; collection, preparation and conditioning of the biomass; chemical analysis of the briquettes; evaluation of the technological characteristics of the briquettes; evaluation of the energy consumption and energy efficiency for producing the briquettes, taking into account two drying methods (natural and artificial drying). In the meantime, some specific laboratory equipment was design and built for the artificial drying of biomass, evaluation of the mechanical durability, measurement of the energy consumption etc. The analysis of the experimental data has led to the conclusion that the agricultural waste from vine pruning can constitute an important and sustainable source of energy in the form of bri-quettes, which fulfill most of the requirements imposed by the international standards.

Abiotic stress, especially drought stress poses a significant threat to the terrestrial plant growth, development, and productivity. Although mulberry have great genetic diversity and extensive stress tolerant traits in agroforestry systems, only a few reports offer preliminary insight into biochemical responses of mulberry leaves under drought conditions. In this study, we performed a comparative metabolomic and transcriptomic analysis on the “drooping mulberry” (Morus alba var. Pendula Dippel) under PEG-6000-simulated drought stress. Our research revealed that drought stress significantly enhanced flavonoid accumulation and up-regulated the expression of phenylpropanoid biosynthetic genes. Furthermore, the activities of superoxide dismutase (SOD), catalase (CAT) and malondialdehyde (MDA) content were elevated. In vitro enzyme assays and fermentation tests indicated the involvement of flavonol synthase/flavanone 3-hydroxylase (XM_010098126.2) and anthocyanidin 3-O-glucosyltransferase 5 (XM_010101521.2) in the biosynthesis of flavonol aglycones and glycosides, respectively. The recombinant MaF3GT5 protein was found to recognize kaempferol, quercetin, and UDP-glucose as substrates, but not 3-/7-O-glucosylated flavonols and UDP-rhamnose. MaF3GT5 is capable of forming 3-O- and 7-O-monoglucoside, but not di-O-glucosides, form kaempferol. This implies its role as a flavonol 3, 7-O-glucosyltransferase. The findings from this study provided insights into the biosynthesis of flavonoids and could have substantial implications for the future diversified utilization of mulberry.

Brazil has ideal conditions for the large-scale use of cabotage cargo transportation: a vast coastline with almost 7,400 km, approximately 70% of the population resident in a coastal range of up to 200 km from the coast and a strong concentration of activities economic along the coast. However, there is an absolute domain of road modal for the transportation of goods, and cabotage is underused. The purpose of the study was to raise the main barriers that negatively impact the performance of Brazilian cabotage. To this end, it was used to bibliographic and documentary research, based on studies already published in journals, doctoral theses, master's dissertations, congress annals, technical reports and research on government-related government agencies sites, navigation companies and entities related to cabotage. The main barriers that contribute to the low use of cabotage in Brazil were identified and analyzed, as well as possible alternatives of solution for sustainable development of this mode of transport. Such a study will certainly serve as subsidies for the definition of public policies aimed at better use of Brazilian cabotage, as well as to encourage navigation companies to invest more in the transport of goods by cabotage, in order to contribute to the reduction of trucks on highways Brazilian and for environmental preservation.

Large-scale farms are pivotal sites for the development of the agricultural industry, and the quality of the ecological environment is a significant factor affecting the growth of cereal crops. Consequently, assessing the ecological quality of large-scale farms is of great importance. This paper leverages the advantages of remote sensing imagery for long-term, quantitative, and dynamic monitoring of ecological quality over extensive areas. It develops an ecological assessment procedure suitable for agricultural regions based on an Improved Remote Sensing Ecological Index (IRSEI), which considers the coupling of ecosystem component elements. This procedure introduces a Pan-Salinity Index (PSI) tailored to the characteristics of soil salinization in farming areas and incorporates an ecological greenness index based on the Normalized Difference Vegetation Index (NDVI), an ecological humidity index derived from the K-T transform (WET), an ecological dryness index synthesized from the bare soil index and the built-up index (NDBSI), and an ecological heat index represented by the Land Surface Temperature (LST) calculated from atmospheric parameter models. These five indices are integrated into the ecological assessment system. The experimental results visually demonstrate the development and changes of ecological impact factors in the farm research area over the past decade, as well as the spatiotemporal variations in the quality of the farm's ecological environment. The findings indicate that between 2010 and 2019, the overall trend of IRSEI first declined, then rose, and subsequently experienced a slight decrease. Through differential analysis, regions and areas with declining ecological quality were identified, providing a data reference for the formulation and implementation of future ecological protection and management measures for the farm. The proposed IRSEI method offers a rapid and effective new monitoring approach for agricultural planting areas with a tendency towards soil salinization.

Shrinking farm size and fragile farm resources pose a significant challenge to the sustainability of small-scale farms. Efficient resource utilization in small-scale farms is crucial to achieving farm sustainability through endogenous mechanisms. However, the precise mechanisms to integrate physical resources to achieve farm sustainability are not very clear yet. By capturing the interaction among farm resources as a network phenomenon, we identify the discrete resource interactions (RIs) in different types of small-scale farms of Indian Sundarbans, which are associated with higher farm sustainability. Thirty-two linkages, 11 reciprocal linkages, 22 triads, and three ‘core elements’ that occurred and cooccurred on highly sustainable farms are found to be critical in achieving farm sustainability. Using the properties of resource interaction networks as explanators of farm sustainability, we anticipate that sustainability in small-scale farms can be achieved by strategically creating new RIs on the farm. However, there may be limitations to such achievement depending on the nature of RI and type of farm. The analytical approach helps to understand the structural basis of sustainability in small-scale farms, and this approach can be used to achieve farm sustainability through the strategic integration of existing farm resources in the smallholder systems.

Antimicrobial resistance (AMR) threatens to reverse the essential benefits of antibiotics not only in humans, where decades of advancements in healthcare outcomes are endangered but also in the food production industry. The emergence of AMR in the pre- and post-harvest systems presents a serious risk of contamination or infection directly by antibiotic-resistant bacteria (ARB) and genes (ARGs) for farmers, agricultural practitioners, abattoir workers, food handlers and their associated contacts as well as consumers at the end of the food chain. Any breach in the food safety barrier leading to the emergence and spread of ARB and ARGs has severe multi-sectorial implications and threatens to reverse decades of human and animal health improvements globally. As the world moves towards Sustainable Development Goals (SDGs), food safety is a critical element to improve and strengthen global health, security and ensure sustainable development. This paper presents the challenge of AMR through the lens of food safety, by highlighting its multi-sectoral and multi-dimensional implications not only the SDG on food safety but also on food security, public health, animal health and welfare, the environment and climate and socio-economic development.

Canopy characteristics are crucial for accurately and safely determining the pesticide quantity and volume of water used for spray applications in vineyards. The inevitably high degree of intra-plot variability makes it difficult to develop a global solution for the optimal volume application rate. Here, the design procedure of, and the results obtained from, a variable rate application (VRA) sprayer are presented. Prescription maps were generated after detailed canopy characterization, using a multispectral camera embedded on an unmanned aerial vehicle, throughout the entire growing season in Torrelavit (Barcelona) in four vineyard plots of Chardonnay (2.35 ha), Merlot (2.97 ha), and Cabernet Sauvignonn (4.67 ha). The maps were obtained by merging multispectral images with information provided by DOSAVIÑA®, a decision support system, to determine the optimal volume rate. They were then uploaded to the VRA prototype, obtaining actual variable application maps after the application processes were complete. The prototype had an adequate spray distribution quality and exhibited similar results in terms of biological efficacy on powdery mildew compared to conventional (and constant) application volumes. The VRA results demonstrated an accurate and reasonable pesticide distribution, with potential for reduced disease damage even in cases with reduced amounts of plant protection products and water.

The community of farmers in land tenure have different institutional in terms of mastery of the land. In Indonesia there were generally institutional governing the utilization of land for mastery permanently, but there were also institutional governing dominion land in turn. This research aimed to chart institutional pattern characteristic mastery of the land inheritance system passes in, andanalyzeits contribution to sustainability of agriculture in the economic, social and ecological. Research method using case studies, with unit case a subdistrict in Gowa, South Sulawesi province, Indonesia. The results showed that institutional land pattern mastery system passes the inheritance patterns of alternation that has in effect hereditary, pattern rotation established by the heir land management patterns, depending on the number of beneficiaries, as well as not having managed to land fragmentation, so the scale of farming land, conditions can be maintained , the land was slanted so given a terracing, planting process was carried out by means of mutual. Neither found that institutional land pattern mastery system passes the inheritance had been contributing the sustainability of agriculture in social and ecological, but have yet to fully contribute to the sustainability of agriculture in economy.

Zoonotic abortive diseases represent a significant health and economic risk for national public health. This cross-sectional survey was conducted from April to October 2021 among 200 selected small ruminant farmers in the three northern regions of Cameroon. Data collection was done through questionnaires administered by exchange with the herder and responses were coded and recorded on an Excel spreadsheet. The data were then analyzed with R software, version 2.13.0. An ANOVA test was used to assess significant differences in mean of Knowledge, Attitudes, Practices and Perception of zoonotic risks (KAPP) scores between regions. Pearson correlations were used to calculate the association between KAPP scores within regions. Small ruminant farmers surveyed had low mean scores for knowledge of abortive Toxoplasmosis and Chla-mydophilosis (0.1 ± 0.2), desirable attitude (0.32 ± 0.07), appropriate practice (0.36 ± 0.13) in managing abortion, and positive perception of zoonotic risks of Toxoplasmosis and Chlamydo-philosis in small ruminants (0.12 ± 0.33), respectively. KAPP was significantly (p<0.01) and posi-tively associated with knowledge (r=0.98) and risk perception (r=0.99). However, attitudes (r=0.06), practices (r=0.05) and risk perception of toxoplasmosis (r=0.07) and Chlamydophilosis (r=0.08) were not associated with farmers' knowledge. This study revealed significant knowledge gaps, low levels of desired attitudes, and high-risk behavioral practices. These results therefore call for capacity building of health professionals and farmers to better integrate the One Health concept in the management of neglected zoonotic diseases.

The objective of the research was to examine the determinants that determine farmer participation and shallot farming development in search of effective farm management practices. The study used Structural Equation Modeling data analysis. The primary data was collected from direct-structural interviews with 150 randomly chosen shallot farmers in Bantaeng Regency, Indonesia. It was found that the physical attributes of the land, the economic framework of the community, and the political system of the agricultural community were fundamental factors that exerted a positive and significant influence on farmer participation. Therefore, improvements in the physical aspects of land, the economic framework, and the political structure of agricultural communities could promote farmer participation. Furthermore, the farmers’ participation and the political structure of agricultural communities have a positive and significant impact on the development of shallot farming. Thus, by increasing the influence of government officials and community leaders, shallot farming can be promoted. The farmers can then enhance their participation in the shallot farming plan's formulation and implementation, providing the continued development of shallot farming. The findings of this study contribute significantly to the body of knowledge by validating previous research and proposing different ways to improve effective farm management practices in shallot farming.

The aim of this research work is to study the influence of temperature, solar irradiation and wind dust on the production of solar energy. In addition, it aims to study the assessment of water quality, in particular groundwater used for cooling and cleaning photovoltaic panels (quality analysis). it's an important source, stable and sustainable can be used entirely for cooling and cleaning PV modules from the sales dust, in order to improve their performance. To date, all research studies carried out in this context of cooling and cleaning using water have not taken account of the nature of this water. We have taken a sample of water from a well in a rural area in the Darra Tafilalet region of Morocco. This region has an arid and semi-arid climate, with very high temperatures and dust-laden winds, particularly in summer. These meteorological characteristics influence the efficiency of cells, particularly photovoltaic (PV) panels, reducing their performance. Next, the water sample was analysed in the laboratory. The results obtained show that the groundwater in this area is very sensitive to cooling and cleaning photovoltaic panels. Moreover, these results indicate that the temperature, solar irradiation and wind-blown dust have a significant influence on energy production.

The aim of this study was to investigate the relationship between postprandial glycemic levels based on flash-monitoring and the production of intestinal hydrogen (H2) and methane (CH4) gases based on measurement of the amount of these gases in exhaled air. We studied 14 subjects with type 2 diabetes mellitus (T2DM) and 10 individuals without diabetes (control) with 3 food-load tests with simultaneous determination of gases in exhaled air and assessment of glucose levels. In 15.4% of patients with T2DM, there was a non-significant increase in exhaled H2. How-ever, all subjects in the control group had significant increase in exhaled H2. Moreover, the level of H2 in exhaled breathafter food load in patients with T2DM was lower than in normoglycemic subjects. Also, in normoglycemic subjects there was an inverse correlation between maximum glucose rise and maximum H2 in exhaled air after food load. At the same time in patients with T2DM the level of CH4 in exhaled air directly correlated with the parameters of postprandial glycemia in the test with lactulose. Confirmation of a causal relationship between decreased H2 production, increased intestinal CH4 production, and more severe postprandial glycemia may identify new therapeutic targets in the correction of postprandial glycemia in patients with T2DM.

The growth of the wind power sector has been marked by environmental, economic, and political drivers. Its starring role is also visible in the emergence of the so-called “green jobs”. Notwithstanding, its evolution ought not to compromise issues related to occupational risks. This exploratory study examines psychosocial risks in the operation and maintenance of onshore wind turbines in a leading Portuguese company. We conducted interviews with main stakeholders (Human Resources, OHS professionals, and team leaders); developed an “activity diary” for the operation and maintenance technicians to describe their activity and perceived impacts on health, complemented with collective interviews; and applied the Work and Health Survey. The results revealed particular risks and health impacts: working under adverse weather conditions; working at heights and in confined spaces; spending long work hours inside of the nacelles to achieve an optimum balance between favorable wind slots to intervene and avoiding additional trips up and down the wind turbines without lifts (70m-120m); and the feeling of early ageing. At a time when these workers are striving for recognition of their profession as a “rapid wear profession”, it is a key moment to discuss these results to guarantee sustainable conditions for future generations of workers.

Rice provides ~20% of human dietary energy and, for many people, a similar share of their protein. Rice cultivation, however, produces significant greenhouse gas (GHG) emissions, comparable to those from the aviation sector. The main GHG from rice production is methane, mostly a result of conventional rice cultivation (CRC) keeping rice fields continuously flooded during the crop cycle. There is extensive evidence that alternate wetting and drying (AWD) of rice fields substantially reduces methane emissions. AWD is one component of the System of Rice Intensification (SRI), an agroecological approach to the management of plants, water, soil and nutrients practiced by millions of farmers in both lowland irrigated rice and upland rainfed cultivation. Thirteen countries have included SRI in their Nationally Determined Contributions to GHG reduction or climate change mitigation. This article reviews 16 field studies of the net reduction in GHG emissions from the adoption of AWD, eight from the adoption of SRI, and two that compared SRI and AWD. Where available, the review includes data on yield and therefore on carbon dioxide-equivalent GHG emissions per kilogram of rice produced. The evidence indicates that AWD and SRI offer a similar and substantial reduction (~35–41%) in GHG emissions per hectare compared with conventional rice cultivation. However, SRI offers ~66% greater yield than CRC, and therefore greater reduction in emissions per kilogram of rice, ~54% more than AWD. The limited data directly comparing SRI and AWD support this finding. SRI also appears to have greater potential to sequester carbon in the soil. SRI lowers rice farmers’ costs of production, adds to their income and can make climate-friendly methods more attractive. Both AWD and SRI are greatly preferable to current conventional practices, but SRI offers opportunities to contribute to food security while directly addressing the drivers of climate change.

The dynamic landscape of AI adoption and its impact on employment in Malaysia demands a multifaceted approach to navigate the challenges and harness the opportunities presented. While the government's commitment to fostering AI adoption through initiatives like the National AI Framework and the Malaysia Digital Economy Blueprint is commendable, it is imperative to address concerns regarding job displacement and ensure inclusive growth. This study identifies the pressing research problem of workforce readiness for the AI-driven future, emphasizing the need to explore strategies for reskilling and upskilling affected workers. By employing critical lenses such as Marxist, feminist, and postcolonial perspectives, scholars highlight the power dynamics and societal implications inherent in AI deployment, guiding the development of policies and interventions that prioritize workers' interests and address social inequalities. Moving forward, a comprehensive approach combining policy interventions, educational reforms, and inclusive strategies is essential to maximize the benefits of AI adoption while mitigating its potential risks. Longitudinal studies, interdisciplinary research, and comparative analyses will further advance our understanding and inform evidence-based policymaking in this evolving field. Ultimately, by prioritizing workforce preparedness, social equity, and sustainable development, Malaysia can position itself as a leader in the AI-driven global economy, fostering a resilient, inclusive, and prosperous society for all.

The rising world population has made it imperative to get rid of time-consuming and non-economical agricultural practices. Thus, advances in Internet of Things (IoT) technology have recently propelled significant advancements in agriculture, similar to several other sectors. Through the combination of IoT and Farm Management Information Systems (FMIS), field data can be automatically collected, stored, analysed and accessed by farmers in real-time. In this paper, we present Proof-of-Concept (PoC) IoT circuit and FMIS web app for precision agriculture. The IoT circuit incorporates sensors, microcontroller and Wi-Fi module, which acquire and transfer field data to the FMIS web app. We designed and simulated the IoT circuit using Proteus, Arduino Uno, and Arduino Integrated Development Environment (IDE). The FMIS PoC web app was modelled with relevant Unified Modeling Language (UML) diagrams and Django (a Python framework) was employed to implement the app. Our simulation result illustrates how essentila field parameters can be monitored remotely and seamlessly by agriculture practitioners. It further provides a blueprint for real-time precision agriculture at scale and could serve as a learning aid for students in engineering and agricultural science.

Along with the economic growth, the companies must contribute to social progress and promote environmental sustainability in equal harmony. Sustainable human resource management (SHRM) strategies make it possible to attain the economic, social and environmental goals of a firm. In this regard, a survey method is discussed using the literature review and online questionnaire to identify the main factors/indicators during the SHRM evaluation of manufacturing firms in India. Uncertainty is commonly occurred in the assessment of SHRM factors. As a generalized version of fuzzy sets, single-valued neutrosophic set (SVNS) has been demonstrated as a valuable tool to illustrate the indeterminate, inconsistent and uncertain data of realistic decision-making problems. Considering the idea of SVNSs, this study develops a hybrid multi-criteria group decision-making (MCGDM) approach for assessing the SHRM of manufacturing firms under uncertainty settings. For this purpose, an SVN-alternative ranking order method accounting for two-step normalization (AROMAN) is proposed based on VIFI-score function-based decision experts’ (DEs’) weighting tool and integrated criteria weight-determining model to solve the MCGDM problems with fully unknown DEs and criteria weights. In this regard, we develop new SVN-distance measure to compute the degree of difference between SVNSs. Some examples are presented to demonstrate the efficacy of developed measure over the existing ones. In addition, new criteria weight-determination model is presented with the integration of objective weights through IVIF-distance measure-based model and subjective weights through ranking comparison (RANCOM) tool on SVNSs. The proposed ranking method is applied to an empirical study of SHRM assessment for manufacturing firms in India, which shows its applicability and feasibility. In this study, the evaluation criteria are characterized into social, environmental and economic aspects with DE’s opinions. Comparative and sensitivity analyses are made to show the strength and steadiness of presented approach. This study provides an innovative MCGDM analysis framework, which makes a significant contribution to the SHRM assessment problem under indeterminate, inconsistent and uncertain setting.

The purpose of this research was to analyze the moderating effect of clean energy innovation on the relationship between corporate carbon footprint and corporate profits in those industrial sectors associated with high demand for fossil fuels in which it is "hard to abate" CO₂e emissions. It used a longitudinal research design, in particular a panel study under a structural equation modeling (SEM) approach, based on partial least squares. For the longitudinal moderation analysis, this research employed the Bayesian method by defining a multiple-indicator latent growth curve model (B-LGC model). A global sample was used consisting of 7,827 firm-year observations between 2015 and 2021 corresponding to 167 international firms. The results revealed a very significant impact of the corporate carbon footprint on corporate profits. Likewise, the results showed that innovations in clean energy, when measured as the consumption of renewable energy, positively moderates the relationship between the greenhouse gas emissions from the value chain associated with Scope 3 of the Greenhouse Gas (GHG) Protocol, and the gross profit margin obtained. Besides the academic contribution represented by the moderating effect of clean energy innovation, these findings imply that a more detailed understanding of the emissions of the entire value chain (Scope 3 CO₂e) by executives and managers of high emitting CO₂e companies represents an effective mechanism to obtain higher profits, create competitive advantages and, at the same time, achieve a net zero emissions strategy. More importantly, public policy makers will be able to use these results to revise CO₂e-related policies paying more attention to the Scope 3 CO₂e emissions produced by these companies, to formulate regulatory and control mechanisms that stimulate clean energy innovation.

Ammonia-oxidizing microorganism communities are abundant and functionally efficacious in nitrification. However, ammonia-oxidizing archaea (AOA) and ammonia-oxidizing bacteria (AOB) groups complicate this process in subtropical streams. This study investigates the abundance of ammonia-oxidizing communities south of the Dabie Mountains, China, using quantitative polymerase chain reaction (qPCR). Clone libraries were utilized to analyze the abundance and microbial structures of AOA and AOB in sediments. Such analysis may provide strong evidence reflecting the links within the environment. The results show that AOB had a lower abundance of copies of the ammonia-oxidizing gene (amoA) than AOA. Interestingly, the AOA and AOB community compositions were correlated with ecological characteristics. The dissolved oxygen (DO) and oxidation-reduction potential (ORP) had significant positive correlations, whereas the phosphorus within the structure had a negative correlation with the abundance of both groups. Our study shows that it might adopt some species related to Nitrosotalea clusters that can resist comparably higher pH (toward pH 6.5). Together, these results imply that the physiological adaptation of microbial guilds to environmental pressures in ammonia-oxidizing archaea might allow them to have a more substantial function of ammonia-oxidizing communities in natural habitats.

This study evaluated batch fermentation modes, namely, separate hydrolysis and fermentation (SHF), Quasi-simultaneous saccharification and fermentation (Q-SSF), and simultaneous saccharification and fermentation (SSF), and fermentation conditions, i.e., enzyme and yeast loadings, nutrient supplementation and sterilization, on high titer bioethanol production from SPORL-pretreated Douglas-fir forest residue without detoxification. The result indicated Q-SSF and SSF were obviously superior to SHF operation in terms of ethanol yield. The enzyme loading showed a strong positive correlation between enzyme loading and the ethanol yield. The nutrient supplementation and sterility was not necessary for ethanol production from SPORL-pretreated Douglas-fir. The yeast loading showed no significant influence on the ethanol yield for typical SSF conditions. The terminal ethanol titer of 43.2 g/L, or 75.1% theoretical based on glucose, mannose, and xylose theoretical was achieved when SSF was conducted at the condition of following: whole slurry solids loading of 15%, enzyme loading of 20 FPU/g glucan, 1.8 g/kg (wet) yeast loading, without nutrition supplementation and sterilization, at 38°C, on shake flask at 150 rpm for 96h. It is believed that with mechanical mixing, enzyme loading can be substantially reduced with affect ethanol yield by using a long fermentation time.

Consumer preference for products made from transgenic technology has been widely studied, yet few studies exist exploring the factors influencing producers’ adoption of transgenic technology. Based on field surveys in Chinese provinces of Shanxi, Henan and Shandong, we employed a gambling experiment to capture producers’ risk preferences by estimating their risk aversion coefficients. We further estimated producers’ risk amplification and risk perception of GM technology. Using ordered logit model and Poisson model we identified the major factors influencing producers’ adoption of transgenic technology. We found the factors impacted the decision of producers from different regions in different ways. The results showed that over 60% of participants amplified the risk of transgenic crops. When there was potential risk, producers might not be rational even if they had high level of knowledge and cognition about the technology. Our results shed light on government policies aiming to increase the adoption of new technologies by producers.

Global warming has been increasing heat stress threat in animals which can be monitored by Temperature Humidity Index (THI). The present study describes the relationship of THI, calculated using 35 years period weather station data, and production performances of dairy cattle in a se-lected area of Bangladesh. The month January and June were identified as the coolest and hottest, respectively. Based on this outcome, every year in the month of January and June production performances of 10 crossbred cows with homogenous characteristics were monitored for a period of 5 years. The average THIMEAN value was found 17% higher in June as compared to January, and with this increment of THIMEAN average milk production was decreased 24.4% (p<0.05). The milk fat and protein content were also reduced (p<0.05) by 14.5 and 15.2%, respectively suggesting negative correlation as like as milk production. However, ash content was increased 15.3% that indicates a positive correlation. In addition, multiple regression analysis revealed each point increase in THIMEAN and rectal temperature, there was a decrease in milk yield 0.04 and 1.17 kg ECM, respectively. In contrary, each point increase in THIMEAN resulted 0.059 C increase of rectal temperature. Taken together, THIMEAN value calculated using metrological station data has distinct relationship with the production performances of lactating crossbred dairy cows.

The importance of ICTs for dissemination of information to farmers has been verified by extension practitioners, information and communication scholars, policy makers and development agencies. Information related to new seed varieties, production technologies, livestock breeds, vaccines, including weed and pest control, as well as relevant market information is constantly required by smallholder farmers. The identification of specific attributes among smallholder farmers which contributes to their adoption of a proposed ICT-based information source provides an important tool for developing interventions which address the information needs of farmers. Using a literature survey methodology, pertinent studies related to adoption of ICTs, farmers’ information source usage and relevant frameworks were identified, including applicable theories and models in technology adoption and information behaviour. In the proposed framework, the socio-economic characteristics of smallholder farmers were posited as key variables influencing smallholder farmers, within a farming system, to adopt ICT-based information sources. The framework contributes to discern the prospects of adopting ICT-based information sources by individual farmers within a farming system, and may also envisage other related welfare outcomes and market participation pathways among smallholder farmers. The review also addresses the paucity of conceptual discourse, while contributing to a growing pool of research on ICT in African agriculture.

Regional product labeling can help develop regional business activities, especially with traditional regional products. Their general popularity is a significant source of income for the less developed regions. The Gemer-Malohont region belongs to economically underdeveloped areas with high unemployment rate. The subject of the survey was regional food products, which are made by small farmer. The analysis was carried out on a questionnaire survey in the period April-July 2017 in each of the region's districts. The results obtained by questionnaire survey have been statistically processed using the statistical method (two-step cluster analysis, radar chart, box-plots, regression analysis) using Microsoft Excel and IBM SPSS Statistics 23 software. Through cluster analysis and based on the preference of regional food, we divided consumers into two groups - knowledgeable regional food purchasers and priced oriented consumers. We have shown that the more developed regions (Rimavská Sobota, Rožňava) show a higher rate of purchase of regional foods. Less developed regions (Poltár, Revúca) are represented by lower-income consumers for whose the food price is the decisive criterion. Local residents of backward regions should pay attention to domestic food and local small farmers, who are the way to create local capital and local development.

There are overwhelming empirical evidences highlighting the contribution of indiscriminate antibiotic usage (ABU) in food animals to the overall burden of antibiotic resistance (ABR) in humans, thus making antibiotic use the main selective pressure driving antibiotic resistance. Social and behavioral perspective on antibiotic use and resistance in poultry is limited. Our study therefore aimed at obtaining information on antibiotic usage, awareness of ABR, and the attitude and perceptions towards prudent antibiotic usage and ABR. A cross-sectional survey using a structured questionnaire was conducted in 125 poultry farms in Kwara state in December 2019. Most farmers (69.6%, n=87/125) were aware of ABR and had satisfactory knowledge about ABR with a mean knowledge score of 3.16±1.47. The age, gender, level of education of farmers, and their flock size were significantly associated with a satisfactory knowledge of ABR (p<0.05). Tertiary education was significantly associated with ABR awareness (OR: 4.7; 95% CI: 0.0690, 0.654; p=0.007) and the ABR knowledge level (OR: 7.8269; 95% CI: 3.2693, 18.7381; p < 0.01). Higher flock size was significantly associated with a satisfactory knowledge of ABR (OR: 9.4551; 95%CI: 3.7928, 23.5707; p<0.01). Most of the poultry farmers (68%) had positive attitudes towards prudent antibiotic use with a mean score of 2.75±0.89. On the contrary, only 32.8% of poultry farmers had a good perception of ABR with a mean perception score of 4.95±1.12. The ABR knowledge level was significantly associated with the perceptions of farmers (p<0.05) but not their attitudes toward ABU and ABR (P=0.083). There was evidence of unprescribed use of antibiotics in poultry and a failure to observe antibiotic withdrawal periods. These constitute a risk of exposure to unacceptable levels of drug residues from poultry products and an increased risk of ABR. Improving education and communication on antibiotic stewardship programs are crucial to prevent the looming antibiotic apocalypse.

The cultivation systems of Coffea spp in a cooperative society in Puebla, Mexico, include rustic, traditional polyculture, commercial polyculture, unshaded monoculture and shaded monoculture. In this work, the properties of the soil were analyzed through physical, chemical, and biological analysis to determine its nutritional status. Composite sample analyses were conducted to determine physical, chemical and microbiological parameters (fungi, actinomycetes, mesophilic bacteria, nitrifying and denitrifying bacteria). Leaf nutrients were determined. Rustic was the cropping system with the highest amount of K (0.76 cmol kg-1) in soil and nutrient assimilation in leaf (N= 2.79%, P= 660.01, K= 17297.22 and Fe= 271.24 mg kg-1) (p= 0.001); in addition to presenting high populations of mesophilic bacteria, fungi and actinomycetes (30.16, 0.59 and 0.83 respectively, x10 6 CFU g-1 soil) and very low nitrification and denitrification rates. The principal component analysis (PCA) (>3.25%) indicated that actinomycetes and K in soil favor the assimilation of Fe, K and P. This Coffea spp cultivation system had a lower impact on soil health than the rest of the systems and favored forest ecosystem conservation.

In this study, a novel absorbable hemostatic agent was developed using carrageenan (CRG) as a natural polymer and cerium oxide nanoparticles (CeO2 NPs).  CRG-CeO2-0.5 and CRG-CeO2-1 composites were prepared by compositing CRG and CeO2 at a weight ratio of 200:1 and 100:1, respectively. Physio-chemical and structural properties of these compounds were studied and compared with pristine CRG. Upon incorporation of CeO2 nanoparticles into the CRG matrix, significant reductions in hydrogel degradation were observed. In addition, it was noted that CRG-CeO2 exhibited better antibacterial and hemostatic properties than CRG hydrogel without CeO2.The biocompatibility of the materials was tested using the NIH 3T3 cell line and all samples were found to be nontoxic. Particularly, CRG-CeO2-1 demonstrated superior hemostatic effects, biocompatibility, and a lower degradation rate since more CeO2 Nps were present in the CRG matrix. Therefore, CRG-CeO2-1 has the potential to be used as a hemostatic agent and wound dressing.

Abstract: The study focuses on how socio-economic and demographic indicators affect fertilization sustainability (excessive amount of fertilization). Principally we aim to examine the significance magnitude of the effects of three socio-demographic variables such as traditional way of fertilization, rental land farming, and farmers’ younger age on over-fertilization in Bangladesh and other developing countries. In 1960s, Bangladesh state authority launched a campaign ‘Grow more Food’ to feed huge numbers of population and thus the farmers are provided chemical fertilizers and pesticides at a subsidized low price. Farmers began to use huge amount of fertilizers for gaining high yields and continued it to present causing environmental woes a lot. We interview (face-to-face, focus group discussion, and phone interview) 210 Bangladesh farmers in 2016 by semi-structured questionnaire. Data has been analyzed using General Linear Model (GLM) in Univariate Analysis of Variance. The study found the effect of traditional way of fertilization on excessive amount of fertilization is strongly significant at 1% level. Apart from, rental land farming and farmers’ younger age have a significant influence on over- fertilization; though their significance level (5% and 10% respectively) is quasi-strong. Policy makers can be able to formulate fertilizer policy on the basis of these findings.

Knowing the spatial variability of factors that influence crop yield is essential to carry out a localized treatment. The present study aimed to map the spatial variability of apparent soil electrical conductivity (ECa) in two cultivation areas, delimit management zones (MZ), characterize the soil density (Sd) at two depths, in each MZ, and assess whether the delimitation of MZ, based on the spatial variability of ECa, was able to identify regions of the productive field with different Sd. Spatial variability of ECa was detected. MZ with the highest mean value of ECa also presented the highest mean values of Sd. The highest Sd values were observed for the 0.1 – 0.2 m layer, regardless of the studied area. Regardless of granulometry, the proposed method was able to detect density differences from ECa. The delimitation of MZ, based on the spatial variability of ECa mapping, was able to differentiate the mean values of Sd between MZ 1 (1.53 g cm-3) and MZ 2 (1.67 g cm-3) in the Area A, in the 0.1 – 0.2 m layer. A statistical difference was observed for the mean values of Sd, in MZ 1, layer 0.1 - 0.2 m, when comparing the two study areas: A (1.53 g cm-3) and B (1.64 g cm-3). We suggest that further studies should be carried out, as the mapping of the spatial variability of the apparent soil electrical conductivity showed potential in the differentiation of soil bulk density at different depths.

Abstract Introduction PCa is one of the cancers that exhibits the widest disparity gaps. Geographical place of residence has been shown to be associated with healthcare access/utilization and PCa outcomes. Geographical Information Systems (GIS) are widely being utilized for PCa disparities research, however, inconsistencies in their application exist. This systematic review will summarize GIS application within PCa disparities research, highlight gaps in the literature and propose alternative approaches. Methods This paper followed the methods of the Cochrane Collaboration and the criteria set of the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA). Articles published in peer-reviewed journals were searched through the PubMed, Embase, and Web of Science databases till December 2022. The main inclusion criteria were employing a GIS approach and examining a relationship between geographical components and PCa disparities. The main exclusion criteria were studies conducted outside the US and those that were not published in English. Results A total of 25 articles were included, 23 focused on PCa measures as outcomes: incidence, survival, and mortality while only two examined PCa management. GIS application in PCa disparities research was grouped into three main categories: mapping, processing, and analysis. GIS mapping allowed for the visualization of quantitative, qualitative, and temporal trends of PCa factors. GIS processing was mainly used for geocoding and smoothing of PCa rates. GIS analysis mainly served to evaluate global spatial autocorrelation and distribution of PCa cases, while local cluster identification techniques were mainly employed to identify locations with poorer PCa outcomes, soliciting public health interventions. Discussion Varied GIS applications and methodologies have been used in researching PCa disparities. Multiple geographical scales were adopted leading to variation in associations and outcomes. Geocoding quality varied considerably leading to less robust findings. Limitations in cluster-detection approaches were identified especially when variations were captured using the Spatial Scan Statistic. GIS approaches utilized in other diseases might be applied within PCa disparities research for more accurate inferences. A novel approach for GIS research in PCa disparities could be focusing more on geospatial disparities in procedure utilization especially when it comes to PCa screening techniques. Conclusion This systematic review summarized and described the current state and trend of GIS application in PCa disparities research. Although GIS is of crucial importance when it comes to PCa disparities research, future studies should rely on more robust GIS techniques, carefully select the geographical scale studied, and partner with GIS scientists for more accurate inferences. Such interdisciplinary approaches have the potential to bridge the gaps between GIS and cancer prevention and control to further advance cancer equity.

A rare genetic disorder caused by col18.a1 mutations, inherited mostly in autosomal recessive and rarely in autosomal dominant pattern, giving rise to ocular abnormalities and other associated disorders, the condition is referred to as Knobloch syndrome. This paper overviews the anterior and posterior ocular symptoms in Knobloch patients, thus demonstrating the major findings in Knobloch cases including the mutational analysis which discusses the proteins involved and exon number on which mutations are detected. Animal modeling done by knocking out col18.a1 has also been discussed to determine the functions of this gene which have been identified based on anomalies found in knock-out mice.

The effects of post-treatment temperature-based methods on 1D single PLA filaments after FFF have been studied. This lets to decouple the variables related to the 3D structure (layer height, raster angle, infill density, and others) from the variables solely related to the material (molecular weight, molecular orientation, crystallinity, and others). PLA 1D filaments have been aged at 20, 39, 42, 51, 65, 75 and 80 ºC in a water-bath-inspired process in which the hydrolytic degradation of the PLA has been minimised for the ageing temperatures of interest. The evolution of the thermal and mechanical properties of the PLA filaments at different temperatures was recorded. Differential scanning calorimetry (DSC) was used to evaluate thermal and physical properties, in which the glass transition, enthalpic relaxation, crystallisation and melting reactions were analysed. Tensile tests were performed to evaluate the tensile strength and elastic modulus. The flow-induced molecular orientation, the degradation, the logistic fitting and the so-called summer effect –stabilisation of properties at higher temperatures– are discussed for assessing the safeness of accelerating ageing.

Fungal infections impact the lives of at least 12 million people every year, killing over 1.5 million. Wide-spread use of fungicides and prophylactic antifungal therapy have driven resistance in many serious fungal pathogens, and there is an urgent need to expand the current antifungal ar-senal. Recent research has focused on improving azoles, our most successful class of antifungals, by looking for synergistic interactions with secondary compounds. Synergists can co-operate with azoles by targeting steps in related pathways, or they may act on mechanisms related to re-sistance like active efflux or on totally disparate pathways or processes. A variety of sources of potential synergists have been explored, including pre-existing antimicrobials, pharmaceuticals approved for other uses, bioactive natural compounds and phytochemicals, and novel synthetic compounds. Synergy can successfully widen the antifungal spectrum, decrease inhibitory dosag-es, reduce toxicity, and prevent the development of resistance. This review highlights the diversity of mechanisms that have been exploited for the purposes of azole synergy and demonstrates that synergy remains a promising approach for meeting the urgent need for novel antifungal strate-gies.

Abstract:Global ship demolition is mostly concentrated in south Asian countries, namely Bangladesh, India, Pakistan and China, since 1990’s, having competitive advantage for their high natural tide, and low environmental and social costs. Due to high social and environmental externalities, stakeholders increase monitoring of the externalities and continue to prescribe improvement towards sustainability, which put pressures on profitability and competitiveness. As a consequence, also seen in the past, a leakage effect may emerge, leading to shift of this activity to a region, with relatively less monitored and less stricter on social and environmental impacts. Unfortunately, the leakage effect is never predicted in shipbreaking in order to understand the level of push compatible in the given socio-economic contexts. In this study, we have attempted to predict the future ship demolition landscape, applying machine learning technique to 34,531 in-service vessels worldwide, larger than 500 gross tonnage (GT), which is run against a learning model based on 3500 demolished vessels from 2014. This study shows that redistribution may occur among the top recycling nations: India may emerge out to be a dominant player in shipbreaking, surpassing Bangladesh by a margin of two-fold, while Pakistan and China are in decreasing trend. In addition, the leakage effect is observed, in that Vietnam is predicted to be the fourth largest ship demolition country, while China and Pakistan recede from the third and fourth place to 6th and 8th. Turkey is predicted to advance from fifth position to third position by vessel count but stays same in term of total GT dismantled. Although it is not clear if any leakage is to be observed in the near future, this study may be a model for future predictive analytics and help stakeholders take evidence-based business decisions.

Nitric oxide (NO) is synthesized and is involved in various physiological and developmental process regulation in all kingdoms of life. Fungi have been less explored in terms of endogenous NO biology than mammals, plants, and bacteria. In this review, we summarize and discuss the studies to date on intracellular NO biosynthesis and function in fungi. Two mechanisms for NO biosynthesis, NO synthase (NOS)-mediated arginine oxidation, and nitrate and nitrite reductase-mediated nitrite reduction, are most frequently reported. Furthermore, we summarize the multifaceted functions of NO in fungi, as well as its role as a signaling molecule in fungal growth regulation, development, abiotic stress, virulence regulation, and metabolism. Finally, we present potential directions for future research on fungal NO biology.

This article is about school evaluation. The objective was to explain critically the mediating relationships between educational evaluation and the production of school knowledge from the perspective of the Dialectical Historical Materialism. With this interest, a documentary analysis was made, obtaining as result four explanatory categories: production, subsumption, distribution and exchange of knowledge, which form a concrete totality with distinctions and antagonistic relationships between them, limited by their opposite. It is concluded that the evaluation as a mediating form lacks antagonistic pair and consequently of control by opposition, emerging from the school daily as autonomous and sovereign entity, oppressive of school subjects.

Abstract Sickle cell anaemia (SCD) is a life-threatening haematological disorder which is predominant in sub-Saharan Africa and is triggered by a genetic mutation of the β-chain haemoglobin gene resulting in the substitution of glutamic acid with valine. This mutation leads to the production of an abnormal haemoglobin molecule called haemoglobin S (HbS). When deoxygenated, haemoglobin S (HbS) polymerizes and results in a sickle-shaped red blood cell which is rigid and has a significantly shortened life span. Various reports have shown a strong link between oxidative stress, inflammation, the immune response, and the pathogenesis of sickle cell disease. The consequence of these processes lead to the development of vasculopathy (disease of the blood vessels) and several other complications. The role of the immune system, particularly the innate immune system, in the pathogenesis of SCD has become increasingly clear in recent years of research, However, little is known about the roles of the adaptive immune system in this disease. This review examines the interaction between the immune system, inflammation, oxidative stress, blood transfusion, and their effects on the pathogenesis of sickle cell anaemia

Optical properties of the cornea are responsible for correct vision, ultrastructure allows optical transparency and biomechanical properties governs the shape, elasticity or stiffness of the cor-nea affecting ocular integrity and intraocular pressure. Therefore, optical aberrations, corneal transparency, structure and biomechanics play a fundamental role in the optical quality of hu-man vision, ocular health and refractive surgery outcomes. However, the convergence of those properties is not yet reported at macroscopic scale within the hierarchical structure of the cornea. This work explores the relationships between biomechanics, structure and optical properties (corneal aberrations and optical density) at macrostructural level of the cornea through dual Placido-Scheimpflug imaging and air-puff tonometry systems in a healthy young adult popula-tion. Results showed convergence between optical transparency, corneal macrostructure and biomechanics.

Cutaneous mycoses are common infections whose treatment has become more complex due to increasing antifungal resistance and the need for prolonged therapies, hindering patient adher-ence and increasing the incidence of adverse effects. Consequently, the use of physical therapies, especially photodynamic therapy (PDT), has increased for the treatment of onychomycosis due to its antimicrobial capacity mediated by the production of reactive oxygen species. This study investigates the in vitro effect of the combination of blue light (448 nm) and red light (645 nm) with terbinafine on the cell viability of human keratinocytes and the production of reactive ox-ygen species. The combination of terbinafine and blue light exhibits a synergistic effect on the production of reactive oxygen species and a significant increase in the expression of superoxide dismutase (SOD), an enzyme involved in the reduction of superoxide ions (O2-) and the genera-tion of hydrogen peroxide (H2O2). Such effect could be useful in clinical practice to improve the response of cutaneous mycoses to pharmacological treatment, reduce their toxicity, and shorten their duration.

This paper reports aligned activities to promote energy and resource-efficient construction practice in Vietnam. First, the governance framework is introduced, including government decrees and technical standards. Then, a laboratory with building physics measurement technology is designed and partly set up at the local partner Vietnam Institute for Building Materials (VIBM), which can be used to determine the essential characteristic values required for the implementation of energy standards. The basis for the prioritization of the characteristic values are the requirements of the National technical regulation on energy efficient buildings of Vietnam – QCVN09:2017/BXD. Furthermore, basic characteristic values from international standards are described, which can also be used for calculations to optimize the energy consumption of buildings. In order to be able to carry out transient hygrothermal computer simulations, special characteristic values were also included. These are particularly useful for the research and development of new building materials and the evaluation of entire buildings in terms of thermal and moisture protection In order to communicate the material properties to the market and enable informed decision making by the stakeholders, a labeling system has been developed. Thereby, the practical means for implementing governance instruments are provided, and the related technical applications are supported.