In response to the problem of no supporting equipment for the cultivation of Codonopsis in the hilly and mountainous areas of northwest China, a combined machine for transplanting outcrop of Codonopsis with micro ridge covered with film is designed. The key components of the prototype are analyzed and designed, and the structures and working parameters of the seedbed preparation device, seedling casting device, rotary tillage soil-covering device, film covering device, seedling head burial and film edge soil-covering device are determined. The transmission system scheme is established, and the working mechanism of the core components is analyzed. Field experiments show that when the target seedling spacing is 4.4cm and the machines moves forward at the speed of 0.1, 0.15, and 0.2m/s, the variation coefficient of planting spacing and the qualification rate of planting depth all meet the standard requirements. The qualified rate of planting posture and film side outcrop are greatly affected by the operating speed of the machine, and decrease with the increase of operating speed. When the operating speed reaches 0.1m/s, the average variation coefficient of planting spacing is 0.08%, the average qualified rate of planting depth, planting posture and film side outcrop is 95.83%, 94.17% and 93.33% respectively, which shows that the operating performance is better than that of the operating speed of 0.15m/s and 0.2m/s. This study provides new reference for the theoretical research and design of mechanized and automated transplanting machinery for Codonopsis seedlings.

The world of science is drowned in a wealth of information. How to make sense of this wealth of published articles, blog posts and abstracts has become an important challenge given the importance of science to different aspects of societal function. At the crux of the issue lies the increasing trend where scientific discovery informs decision making at the societal level. One example, is the elucidation of the ozone hole to the promulgation of the Montreal Protocol in 1987, and documenting increasing atmospheric carbon dioxide concentration led to climate action and signing of the Paris Agreement in 2015. Hence, understanding a research field becomes an important need for many decision makers across different sectors of society. But, the scientific literature is cryptic and esoteric, and presents a significant barrier to comprehension. One approach to ameliorate the problem is statistical machine reading, which provides the critical capability of identifying key concepts that underpins a research field. Such important concepts help provide an incision point to gain further understanding of the field and initiating further conversation about the field. This work sought to validate the concept of whether applying statistical machine reading to a body of literature comprising short blog posts and abstracts of published articles help in understanding the field of metabolic engineering. One important angle pursued in this research is whether the tabulated list of terms and phrases identified by statistical machine reading could be creatively analyzed to gain a deeper understanding of the research field. For example, the most frequently occurring terms and phrases could describe key concepts of the research field. Moving down in frequency occurrence would be terms and phrases that describe methodologies and approaches of the field. Finally, less frequently occurring terms and phrases may be tools and resources used in the research field. Results validated the utility of statistical machine reading in identifying important terms and phrases associated with the research field. But the small dataset of blog posts and abstracts used in this study severely hampered the identification of most of the key concepts of metabolic engineering, which is a fairly broad field of research. Overall, statistical machine reading shows utility in identifying terms and phrases that could describe a field. However, the level of understanding is closely tied in to the breadth and depth of reading material available, which meant that the methodology is data intensive in nature. Future use of supercomputing or quantum computing could help alleviate constraints of computational capacity, and help tackle the exponential rise in computational complexity as the size of the reading material for machine reading expands.

The review emphasizes the importance of the petroleum refining industry in Iraq, highlighting the environmental obstacles it presents. The industry's significant role in the country's economy necessitates a crucial evaluation and improvement of the environmental impact of oil refining in Iraq. The study scrutinizes the progression of crude oil refining techniques, from basic distillation to advanced technologies like vacuum distillation, thermal cracking, and catalytic cracking, all of which are associated with environmental damage. The refining processes produce hazardous gases such as carbon dioxide, carbon monoxide, sulfur oxides, and nitrogen oxides. Refineries also consume substantial amounts of water and discharge effluent, causing environmental issues. It highlights that significant solid waste is produced throughout the refining process, contributing to the environmental difficulties caused by the petroleum industry in Iraq. The paper proposes several approaches to enhancing the environmental performance of Iraq's petroleum refining processes through a comprehensive environmental impact assessment, focusing on identifying problematic areas, measuring environmental damage, and proposing solutions. It provides insights into the types of waste generated in Iraqi refineries, such as polluted hydrocarbon liquids, and highlights the environmental impact of leaks and spills from oil and byproducts, affecting groundwater and soil quality. The paper suggests reusing consumable auxiliary agents and mineral elements in other industrial fields to minimize waste generation, as well as employing advanced technologies like artificial intelligence and machine learning for efficient refining processes and reduced effluents. By offering suggestions to policymakers, industry stakeholders, and environmental regulators in Iraq, the study aims to inform sustainable practices and environmental management strategies within the petroleum refining sector, contributing to improved environmental outcomes and sustainable development in the industry.

Improving the quality of petroleum products and refining processes through the use of artificial intelligence and machine learning techniques is the topic of this article. It shows that expert knowledge and conventional empirical models can't get you where you want to go in a refining process. To effectively capture complex interactions and forecast fuel qualities, machine learning techniques such as principal component analysis (PCA), support vector machines (SVM), artificial neural networks (ANN), and partial least squares (PLS) are suggested. Gasoline and other petroleum products, as well as property prediction, process control, product quality, and operational efficiency in refineries, can all be improved with the help of machine learning applied to spectral or distillation curve data. An exciting new direction in optimizing operations, meeting environmental norms, and precisely estimating gasoline quality is offered by advanced machine learning algorithms.

Smoking is a pervasive global health concern associated with a myriad of diseases, but its impact on cellular aging, particularly in relation to telomeres, is increasingly recognized. Telomeres, protective caps at the ends of chromosomes, play a crucial role in maintaining genomic integrity. This review critically examines the existing evidence on the association between smoking and telomere atrophy, exploring the molecular mechanisms involved and the implications for accelerated aging and heightened disease risk. The comprehensive analysis encompasses both cross-sectional and longitudinal studies, elucidating potential gender and age disparities. Insights into the molecular pathways linking smoking to telomere shortening are discussed, along with the broader implications for public health. The review concludes by outlining potential interventions and suggesting future research directions in this critical area.

This review study, delves into the groundbreaking potential of quantum dots in revolutionizing the field of stem cell tracking for regenerative medicine. Beginning with an introduction that underscores the pivotal role of stem cell tracking in regenerative medicine, this review introduces quantum dots as promising tools for this purpose. It proceeds to explore the fundamental properties of quantum dots, including the quantum confinement effect, size-dependent emission, and exceptional brightness, which render them ideal candidates for stem cell tracking. The historical evolution and recent advancements of quantum dot technology in biomedicine are discussed, emphasizing their growing importance in terms of biocompatibility and safety. Furthermore, various labeling strategies for stem cells using quantum dots are detailed, encompassing surface modification and internalization techniques, with a comparison of their respective advantages and drawbacks. A comprehensive exploration of the wide range of imaging modalities that synergize with quantum dots for stem cell tracking is presented, accompanied by an evaluation of their strengths and limitations. Real-world applications of quantum dot-based stem cell tracking in regenerative medicine, spanning tissue regeneration to disease modeling, are showcased, with illuminating case studies. Current challenges and limitations in quantum dot-based stem cell tracking, including long-term stability and regulatory considerations, are addressed, and innovative directions and emerging trends in quantum dot technology are proposed. Safety considerations and strategies to enhance quantum dot biocompatibility within biological systems are discussed, while ethical and regulatory implications related to their use in stem cell tracking are explored, promoting responsible research and development practices. Finally, the review concludes by summarizing key insights and takeaways, reaffirming the transformative potential of quantum dots in advancing stem cell tracking and the field of regenerative medicine.

This review article delves into the pivotal role of DNA in advancing criminal investigations, presenting a comprehensive analysis of its impact on modern justice systems. DNA, as the genetic blueprint of individuals, has revolutionized forensic science, augmenting the accuracy and reliability of criminal investigations. This study explores the historical evolution of DNA analysis, from its initial discovery to the development of sophisticated techniques like polymerase chain reaction (PCR), short tandem repeat (STR) profiling, and next-generation sequencing (NGS). The article elucidates the intricate process of DNA collection, preservation, and analysis, highlighting its significance in establishing identity, proving guilt or innocence, and resolving cold cases. The utilization of DNA databases and international cooperation in cross-border investigations are also examined, emphasizing their contributions to solving complex criminal cases. Moreover, the ethical, legal, and privacy considerations surrounding DNA usage in criminal justice are critically evaluated. Through a comprehensive literature review, this article synthesizes empirical evidence showcasing how DNA evidence has exonerated wrongfully convicted individuals and provided closure to victims' families. It further elucidates how technological advancements have extended DNA analysis to trace evidence, touch DNA, and forensic genealogy, thereby broadening its application in criminal investigations.

Barcoding of DNA is a species identification technique that utilizes a small DNA fragment from a specific gene or genes known as "sequencing." The idea behind DNA barcoding is that a single sequence can be used to specifically identify an organism to species by comparison with a reference library of these DNA sections. Herbal adulteration can be monitored using DNA barcodes that utilize medicinal plants such as Atropa belladonna. Because it is challenging to distinguish between species solely based on morphology, other plants belonging to the same genus are replacing it in trade. Such replacement with plants not utilized for medical purposes could have negative side effects. Also, Atropa belladonna's positive effects can be completely lost. Taxonomists also have trouble distinguishing the genuine Atropa belladonna plant from cultivated items. As a result, DNA barcoding can now be used to overcome this challenge. The development of DNA barcodes may help with trade control, which protects and conserves endangered species from export outside of the country due to their economic and biological significance. In this review, we discuss the DNA barcoding of Atropa belladonna plant in the medicinal plants field.

The Simultaneous Localization And Mapping (SLAM) scanner is an easy and portable Light Detection And Ranging (LiDAR) data acquisition device. Its main output is a 3D point cloud covering the scanned scene. Regarding the importance of accuracy in the survey domain, this paper aims to assess the accuracy of two SLAM scanners: the NavVis VLX and the BLK2GO Scanner. This assessment is conducted for both outdoor and indoor environments. In this context, two types of reference data are used: the Total Station (TS) and the static scanner Z+F Imager 5016. To carry out the assessment, four comparisons are tested: cloud to cloud, cloud to mesh, mesh to mesh, and edge detection board assessment. However, the results of the assessments confirm that the accuracy of indoor SLAM scanner measurements (5 mm) is greater than that of outdoor ones (between 10 mm and 60 mm). Moreover, the comparison of cloud to cloud provides the best accuracy regarding direct accuracy measurement without manipulations. Finally, based on the high accuracy, scanning speed, flexibility, and the accuracy differences between tested cases, it is confirmed that SLAM scanners are effective tools for data acquisition.

The service conditions of underground coal mine equipment are poor, and it is difficult to accurately extract the fault characteristics of rolling bearings. In order to better improve the accuracy of fault identification of rolling bearings, a fault detection method based on multiscale permutation entropy and SOA-SVM is proposed. First, the whale optimization algorithm is used to select the modal analysis number K and the penalty factor α of the variational mode decomposition algorithm. Then, the vibration signal of rolling bearings is dissolved according to the optimized variational mode decomposition algorithm, and the multi-scale permutation entropy of the main intrinsic mode function is calculated. Finally, the feature values of the matrix are entered into the SVM algorithm optimized by the seagull optimization algorithm to obtain the classification result. The experimental results based on the published rolling bearing datasets of Western Reserve University show that the identification success rate of the proposed method can reach 98.75%. The fault detection of the rolling bearings can be completed accurately and efficiently.

The Earth's fresh water resources predominantly is groundwater that is pumped out due to rapid urbanization and aggravated by climate change. Groundwater modeling is a crucial tool for understanding aquifer systems, employing 1D, 2D, and 3D numerical models with distinct applications. One-dimensional models focus on vertical dynamics, examining aquifer properties and simulating vertical contaminant transport. Two-dimensional models extend to regional scales, considering horizontal variations and assessing groundwater-surface water interactions, making them valuable for watershed-scale studies. Three-dimensional models provide a comprehensive representation of hydrogeological systems, capturing intricate flow patterns and aiding site-specific assessments. Comparative analysis reveals model strengths and limitations, emphasizing the importance of calibration for reliable results. Case studies showcase practical applications, such as 1D models in flooding analysis and 2D models for simulating debris flows. Three-dimensional modeling proves essential for understanding complex river-aquifer exchange fluxes. Future directions call for a global groundwater platform to address data variability and technical challenges. Despite substantial investments required, the anticipated returns in scientific advancements, societal benefits, and economic gains are expected to outweigh the initial costs. This review aims in highlighting the significance of advancing all three-dimension groundwater modeling for sustainable water resource management and environmental protection.

Microplastics (plastic particles < 5 mm) are ubiquitous pollutants that pose the ability to carry microbiota, including pathogens. Microbial adhesion is usually a sign of pathogenicity, thus we investigated the adherent strains found on 4 mm nylon strips, which were ingested and excreted by wild fish specimens. Polymer analysis of the excreted samples shown no signs of degradation, nor have their controls, represented by the nylon strips submerged in the same water tanks. Both the ingested samples and controls presented pathogens in large numbers, revealing the fact that nylon microplastics can be physical carriers for pathogens in the aquatic environment.

Abstract：Ballast pick-up velocity is a crucial parameter in the design of a slurry system in excavating devices, it influences transportation stability, safety, and economy of the system. In this study, a vertical pipe hydraulic experiment with different ballast sizes under water condition was conducted to investigate the ballast pick-up velocity in the shield slurry system. Thereafter, the coupling method of computational fluid dynamics and the discrete element method (CFD-DEM) was employed to establish a numerical model of the ballast pick-up velocity in the shield slurry system, and its applicability was verified by comparing the experiment results. Additionally, the ballast pick-up process under actual working conditions was studied, and the influence of ballast size and concentration on pick-up velocity was investigated. Overall, the primary findings of the study are as follows: 1) The numerical method can be applied to predict both the single ballast and ballast group pick-up velocity. 2) The pick-up process of the ballast group can be divided into four stages. 3) The conveying velocity of the ballast should be higher than the pick-up velocity of the single ballast to facilitate smooth discharge. 4) For a certain increase in ballast concentration, the pick-up velocity tends to be stable.

Novel molecular pinball machines of the plasma membrane control cytosolic Ca²⁺ levels that regulate plant metabolism. [https://youtu.be/zABg7LiBk88] Essential components involve: 1. an auxin-activated proton pump; 2. arabinogalactan glycoproteins (AGPs); 3. Ca²⁺ channels; 4. auxin-efflux “PIN” proteins. Typical pinball machines release pinballs that trigger various sound and visual effects. However, in plants “proton pinballs” eject Ca²⁺ bound by paired glucuronic acid residues of numerous glycomodules in periplasmic AGP-Ca²⁺. Freed Ca²⁺ ions flow down the electrostatic gradient through open Ca²⁺ channels into the cytosol thus activating numerous Ca²⁺-dependent activities.Clearly cytosolic Ca²⁺ levels depend on activity of the proton pump, the state of Ca²⁺ channels and size of the periplasmic AGP-Ca²⁺ capacitor: Proton pump activation is a major regulatory focal point tightly controlled by the supply of auxin: auxin efflux carriers conveniently known as “PIN” proteins [null mutants are pin-shaped!] pump auxin from cell to cell. Mechanosensitive Ca²⁺ channels and their activation by reactive oxygen species (ROS) are yet another factor regulating cytosolic Ca²⁺.Cell expansion also triggers proton pump/pinball activity by mechanotransduction of wall stress via Hechtian adhesion thus forming a Hechtian oscillator that underlies cycles of wall plasticity and oscillatory growth.Finally, Ca²⁺ homeostasis of plants depends on cell surface external storage as source of dynamic Ca²⁺, unlike the internal ER storage source of animals where the added regulatory complexities ranging from vitamin D to parathormone contrast with the elegant simplicity of plant life. This paper summarises a sixty year Odyssey.

This paper presents the current lexical, morphological, syntactic and rule-based machine translation work for Erzya and Moksha that can and should be used in the development of a roadmap for Mordvin linguistic research. We seek to illustrate and outline initial problem types to be encountered in the construction of an Apertium-based shallow-transfer machine translation system for the Mordvin language forms. We indicate reference points within Mordvin Studies and other parts of Uralic studies, as a point of departure for outlining a linguistic studies with a means for measuring its own progress and developing a roadmap for further studies.

Neurofibromatosis type 2 (NF2) is a genetic syndrome characterized by the growth of benign tumors in the nervous system, particularly bilateral vestibular schwannomas, meningiomas, and ependymomas. This review consolidates the current knowledge on NF2 syndrome, emphasizing the molecular pathology associated with the mutations in the gene of the same name, the NF2 gene, and the subsequent dysfunction of its product, the Merlin protein. Merlin, a tumor suppressor, integrates multiple signaling pathways that regulate cell contact, proliferation, and motility, thereby influencing tumor growth. The loss of Merlin disrupts these pathways, leading to tumorigenesis. We discuss the roles of another two proteins potentially associated with NF2-deficiency as well as Merlin: Yes-associated protein 1 (YAP), which may promote tumor growth, and Raf kinase inhibitory protein (RKIP), which appears to suppress tumor development. Additionally, this review discusses the efficacy of various treatments, such as molecular therapies that target specific pathways or inhibit neomorphic protein-protein interaction caused by NF2-deficiency. This overview not only expands on the fundamental understanding of NF2 pathophysiology but also explores the potential of novel therapeutic targets that affect the clinical approach to NF2 syndrome.

Recent findings support an association between childhood maltreatment and the presence of elevated psychopathic traits in adulthood. Using a community sample recruited online (N = 210), we sought to (1) confirm the relationship between childhood traumas and psychopathic traits, and (2) investigate the role of parenting styles in psychopathic traits. Consistent with our predictions, we found an association between all types of childhood traumas and disinhibition. Age and gender moderated the relations between psychopathic traits and childhood maltreatments. Parental rejection and overprotection were positively correlated with the presence of psychopathic traits, while parental emotional warmth was negative correlated. Although our results converge with previous findings, the strength of the correlations observed was not as compelling as in research on undergraduate students. We discuss the numerous interpretations for our findings, and highlight the limitations of research in the field of psychopathy and childhood trauma in the general population.

Background: 3D virtual reality (VR) Motionless Imagery Exercise through Avatar (MIEA) was developed to improve elderly’s psychological (cognitive and emotional) and physical health. This study observed the impact of this program on the cognitive functions and emotional well-being and the electrophysiological changes in older adults. Methods: This study was conducted using a randomized controlled trial design. The participants included 38 adults, 65 to 84 years of age, who were physically mobile and neurologically healthy. Among them, 19 participants were assigned to the experimental group, who underwent exercises using elderly avatars in a VR virtual exercise program. The other 19 participants were assigned to the control group who underwent the VR program. Both groups engaged in the VR intervention for 20 minutes three times a week, over six weeks. Results: The cognitive functions, including attention restraint, working memory, and phonemic fluency, of the experimental group showed significant improvements compared to the control group. Regarding emotional well-being, the experimental group showed greater self-efficacy. The electrophysiological changes revealed similar patterns to exercise-induced reactions in electromyography of the experimental group after intervention. Conclusions: These findings confirm that participation in 3D VR MIEA enhances cognitive functions and physical self-efficacy among the elderly. Therefore, 3D VR MIEA can be utilized in the rehabilitation therapy of patients or elderly with limited physical activity.

This research focuses on exploring generalized electron emissions in one-dimensional conducting materials, specifically examining field emission and thermionic emission. Additionally, the study investigates one-dimensional thermal radiation. The current density is derived for both one-dimensional thermionic emission and one-dimensional field emission. A generalized current density in one dimension is devised, taking into account arbitrary accelerating fields and temperature conditions. The formula for the one-dimensional current density is depicted with accelerating field and temperature across various work function materials. The current is also represented as a function of both temperature and electric field for various temperatures.

Pancreatic cancer (PC) is considered one of the most challenging and formidable malig-nancies to treat because it is usually diagnosed at terminal stage, thus it is characterized with a poor prognosis with 5% of patients living over 5 years. The late diagnosis leads to a lower suc-cess rate of resectability, hence chemotherapy or chemoradiotherapy are the only hopes for most PC patients. However, the available drug combinations for PC treatment did not provide satisfactory clinical outcomes. There is a pressing and urgent need to discover new chemothera-peutics which fight PC with tolerable side effects and less liability for resistance. Pentacyclic triterpenes (PTs) are privileged structures with a multitude of biological activities mitigating several ailments, particularly in neoplasm field. They are characterized by a high therapeutic window and their activity can be highly enhanced through structural modifications. Indeed, several parent PTs such as oleanolic acid, ursolic acid, lupeol, betulinic acid, and celastrol proved effective against different PC phenotypes inhibiting their proliferation, invasion, and metastasis mainly via KRAS modulation. Some PTs worked as adjuvant chemosensitizers in gemcitabine-resistant or TRAIL-resistant cells. Owing to their potential in PC treatment, we pre-sent this review article summarizing PC pathogenesis and the promising role of PTs in the man-agement of PC when used either solely or in combination with other chemotherapies such as gemcitabine and 5-Fluorouracil.

To build a representation of what we see, the human brain recruits regions throughout the visual cortex in cascading sequence. Recently, an approach was proposed to evaluate the dynamics of visual perception in high spatiotemporal resolution at the scale of the whole brain. This method combined functional magnetic resonance imaging (fMRI) data with magnetoencephalography (MEG) data using representational similarity analysis and revealed a hierarchical progression from primary visual cortex through the dorsal and ventral streams. To assess the replicability of this method, here we present results of a visual recognition neuro-imaging fusion experiment, and compare them within and across experimental settings. We evaluated the reliability of this method by assessing the consistency of the results under similar test conditions, showing high agreement within participants. We then generalized these results to a separate group of individuals and visual input by comparing them to the fMRI-MEG fusion data of Cichy et al. (2016), revealing a highly similar temporal progression recruiting both the dorsal and ventral streams. Together these results are a testament to the reproducibility of the fMRI-MEG fusion approach and allows for the interpretation of these spatiotemporal dynamic in a broader context.

In recent years, with the development of the Internet of Things and distributed computing, the "server-edge device" architecture has been widely deployed. This study focuses on leveraging autoencoder technology to address the binary classification problem in network intrusion detection, aiming to develop a lightweight model suitable for edge devices. Traditional intrusion detection models face two main challenges when directly ported to edge devices: inadequate computational resources to support large-scale models and the need to improve the accuracy of simpler models. To tackle these issues, this research utilizes Extreme Learning Machine for its efficient training speed and compact model size to implement autoencoders. Two improvements over the latest related work are proposed: First, to improve data purity and ultimately enhance detection performance, this study partitions the data into multiple regions based on the prediction results of these autoencoders. Second, leveraging autoencoder characteristics to investigate further the data within each region. We used the public dataset NSL-KDD to test the behavior of the proposed mechanism. The experimental results show that when dealing with multi-class attacks, the model's performance was significantly improved, the accuracy and the F1-score are improved by 3.5% and 2.9%, respectively maintaining its lightweight nature.

Statistics modules are included in most university degrees, independent of the degree area. They have an important role in preparing students for the real world. The overall goal of this paper is to identify the common statistical issues students face during the transition from secondary education to tertiary education. Drawing upon data from the University College Dublin (UCD) Math Support Center (MSC) and Universidad Rey Juan Carlos (URJC), our approach aims to optimize learning experiences while advancing sustainability objectives. In this paper, we conducted a categorization of statistical concepts taught in university (based on URJC). Using this categorization, UCD MSC tutor comments were categorized and validated, and subsequently descriptive analyses and text mining were used on the UCD MSC comments to achieve a deeper understanding of the statistical issues. Building on this study, we plan to develop a suite of evidence-based sustainable educational applications and games to support undergraduate students internationally in first-and second-year statistical modules. Our findings on students’ main statistical issues contribute to the cultivation of lasting statistical literacy among students. This research advances the sustainability agenda within statistical education.

Frequently Asked Questions (FAQs) systems rely on semantic symmetry similarity measuring between two sentences. To address the challenges of insufficient training data and limited domain-specific understanding in low-resource FAQs, this paper proposes a general framework, PDAMF-FAQ, to solve these issues. Firstly, we propose a paraphrasing-based data augmentation model that integrates syntactic information and edit vectors. Using a rule-based approach, it retrieves template sentences from a corpus and masks relevant words with special characters. Edit vectors between the original and paraphrase sentences are added to a pre-trained model's encoding layer to enhance the model's ability to learn the differences between the original and reference paraphrase sentences. Additionally, this paper presents a mixed-feature semantic matching model based on SimBERT. The model extracts keyword features from the text, replacing these keywords with special characters to construct intent features. These intent features, along with the user question and keyword features, are then concatenated to form the model's input. Experiments were conducted respectively on the paraphrasing-based data augmentation model, mixed-feature semantic matching model and their comprehensive application in a low-resource domain-specific FAQ. The experimental results show that the proposed framework effectively improve the performance of domain-specific FAQ system.

The catastrophic twin earthquakes that struck southern Turkey and northern Syria on February 6 2023, caused massive casualties and extensive damage to infrastructure, with the province of Hatay bearing the brunt of the impact. To investigate the potential of nighttime light (NTL) data for earthquake disaster assessment, we performed an analysis of pre- and post-earthquake NPP-VIIRS and SDGSAT-1 NTL data. The NTL change ratio (NCR) was employed to identify the extent of damage in Hatay Province following the earthquake to assess the impact on affected buildings and populations. NPP-VIIRS daily NTL Time-series data was used to establish an economic recovery framework for earthquake disasters in Hatay Province, assessing regional economic recovery after earthquake. The results revealed a strong correlation between the total reduced NTLs of NPP-VIIRS and SDGSAT-1 and the presence of severely and moderately damaged buildings. Conversely, the correlation with slightly damaged buildings was relatively weaker. Furthermore, the reduced NTLs of NPP-VIIRS provide a more precise identification of all earthquake damage compared to the SDGSAT-1 data, achieving an overall accuracy of 86.21% in earthquake damage identification and a Kappa coefficient of 0.72. In accordance with the earthquake economic recovery framework, as of the end of March 2024, neither the provincial economy nor any of its districts have fully restored to their pre-earthquake levels. The findings offered new and valuable insights into earthquake disaster assessment, assisting decision-makers in accurately assessing the level of disaster risk following an earthquake and efficiently allocating post-earthquake relief funds.

Real-time data processing and decision-making are increasingly crucial in various applications, driven by the continuous influx of data streams. Event-driven AI workflows within serverless computing environments offer a promising approach to handle these real-time demands efficiently. This paper presents a framework for simulating and analyzing the performance characteristics of such workflows. Our proposed approach utilizes simulated data with varying event rates and durations to investigate the impact on key performance metrics like latency, throughput, and resource utilization. This enables a comprehensive evaluation of the inherent trade-offs within event-driven AI systems. The key findings reveal a trade-off between latency and throughput. As the event rate increases, average processing latency generally increases while average throughput increases. Resource utilization remains relatively stable across different event rates in the simulated scenarios (e.g., 75.55\% at 2 events/second, 74.51\% at 10 events/second). This framework provides a valuable tool for understanding the performance characteristics of event-driven AI workflows and optimizing resource allocation strategies.

The study conducts a comparative analysis of solar radiation estimation methods, assessing the efficacy of the Heliosat-2 algorithm against ground measurements across seven distinct countries: Netherlands, Spain, Japan, Namibia, South Africa, Saudi Arabia, and India. To achieve this, it utilizes two distinct satellite data sources—Himawari-8 for Japan and Metosat Second Generation-MSG for the rest of the countries—spanning the years Jan 2022 to April 2024. A robust methodology for determining albedo parameters specific to Heliosat-2 was developed. During cloudy days, the estimates provided by Heliosat-2 generally exceeded the ground measurements in all the countries. Conversely, on clear days, there was a tendency for underestimation, as indicated by the median value of the mean bias (MB) across most of the countries. The Heliosat-2 model slightly underestimates daily radiation values, with a median MB ranging from −27.5 to +10.2 W.m⁻². Notably, the median root mean squared error (RMSE) on clear days is significantly lower, with values ranging from 24.8 to 108.7 W.m⁻², compared to cloudy days where RMSE values lie between 75.3 and 180.2 W.m⁻². In terms of R² values, both satellites show a strong correlation between the estimated and actual values, with a median value consistently above 0.86 on a monthly scale and over 92% of daily data points falling within ±2 standard deviation.

The integration of Artificial Intelligence (AI) with the Internet of Things (IoT) has propelled technological innovation across various industries. This systematic literature review explores the current state and future trajectories of AI in IoT, with a particular focus on emerging trends in intelligent data analysis and privacy protection. The proliferation of IoT devices, marked by voluminous data generation, has reshaped data processing methods, providing actionable insights for informed decision-making. While previous reviews have offered valuable insights, they often fall short of comprehensively addressing the multifaceted dimensions within the AI-driven IoT landscape. This review aims to bridge this gap by systematically examining existing literature and acknowledging the limitations of past studies. To achieve this aim, the study uses a meticulous approach guided by established methodologies. The chosen methodology ensures the rigor and validity of the review, aligning with PRISMA guidelines for systematic reviews. This systematic literature review serves as a comprehensive guide for researchers, practitioners, and policymakers, offering insights into the current landscape and paving the way for future research directions. The identified trends and challenges provide a valuable resource for navigating the evolving domain of AI in IoT, fostering a balanced, secure, and sustainable advancement in this dynamic field.

Reservoir computing (RC) systems can efficiently forecast chaotic time series using nonlinear dynamical properties of an artificial neural network of random connections. The versatility of RC systems has motivated further research on both hardware counterparts of traditional RC algorithms and more efficient RC-like schemes. Inspired by the nonlinear processes in a living biological brain and using solitary waves excited on the surface of a flowing liquid film, in this paper we experimentally validate a physical RC system that substitutes the effect of randomness for a nonlinear transformation of input data. Carrying out all operations using a microcontroller with a minimal computational power, we demonstrate that the so-designed RC system serves as a technically simple hardware counterpart to the `next-generation’ improvement of the traditional RC algorithm.

Abstract: Wildfires in forest ecosystems exert substantial ecological, economic, and social impacts. The effectiveness of fire management hinges on precise pre‐fire risk assessments to inform mitigation efforts. This study aims to investigate the relationship between predictions from pre‐fire risk assessments and outcomes observed through post‐fire burn severity analyses. In this study, forest fire risk was assessed with the Fuzzy Analytical Hierarchy Process, in which fire behavior factors were used as input. The degree of burn was determined using the Random Forest method using 11519 training points and 400 test points on Sentinel‐2 satellite images in three different classes. According to the results obtained from 266 selected test points located within the forest boundaries, all primary factors showed an increased effect in areas with high burn severity. Climate, in particular, emerged as the most influential factor, accounting for 52% of the overall impact. However, in cases of high fire severity, climate proved to be the most effective risk factor, ac‐counting for 67%. It followed by topography with 50% accuracy at high fire intensity. In the risk assessment is based on the FAHP method, climate was assigned the highest weight value among other factors with 32.2%. Topography emerged as the second most effective risk factor with 27 %. To evaluate the results more comprehensively both visually and statistically, two regions with different stand canopy characteristics were selected within the study area. While high burn severity had the highest accuracy in Case 1 area, moderate burn severity had the highest in Case 2 area. During the days when the fire continued, the direction of spread was obtained from MODIS images. In this way, the fire severity depending on the direction of fire progression was also interpreted. Through an analysis of various case studies and existing literature, the research underscores both the strengths and limitations inherent in predicting forest fire behavior‐based pre‐fire risk assessments. Furthermore, it emphasizes the necessity of continuous improvement to increase the success of forest fire management.

This study conducted an extensive analysis of campylobacteriosis surveillance in Portugal from 2009 to 2021, aiming to investigate demographic shifts, seasonal variations, and antimicrobial resistance (AMR) within Campylobacter isolates. Surveillance network and sentinel laboratory-based system data revealed a substantial under-notification of campylobacteriosis cases, suggesting an underestimated disease burden. A paradigm shift was observed in notification rates, with a notable prevalence among the pediatric population, particularly in children aged 1-4 years, diverging from European reports. However, the study also highlighted an emerging trend of Campylobacter infections in younger adults (15-44 years). The study unveiled a unique seasonal distribution of cases, defying typical summer peaks seen elsewhere. AMR analysis revealed extremely to very high-level resistance to ciprofloxacin and tetracycline, both in C. jejuni (93.7% and 79.2%, respectively) and in C. coli (96.5% and 93.2%, respectively), stable throughout the studied period (2013-2021). C. coli also exhibited significantly higher resistance to erythromycin, gentamicin, ampicillin, amoxicillin-clavulanic acid (decreased resistance), and ertapenem compared to C. jejuni (P<0.001). In conclusion, the study highlights the need for enhanced surveillance efforts and emphasizes worrying AMR levels. The implementation of WGS-based surveillance is recommended to attain a more profound comprehension of disease patterns and the evolving landscape of AMR.

In recent years, Synthetic Aperture Radar (SAR) has received attention in the Automatic Target Recognition (ATR) field due to its ability to acquire images both day and night, combined with the superior resolution offered by the latest sensors. However, despite advances, there remains a deficiency in dataset quality and quantity. This has necessitated the use of simulated data to overcome challenges associated with obtaining large quantities of high-quality images of targets and their subsequent labeling. In this study, we trained a Convolutional Neural Network (CNN) using a simulated dataset, subsequently employing it to classify real images from the MSTAR dataset. Traditional training methodologies often struggle with generalization when confronted with domain disparities between simulated and real data. To mitigate this, we exploited Margin Disparity Discrepancy (MDD), a domain adaptation technique not previously explored in SAR context. Findings from this study showcased a 13% increase in classification accuracy and improved generalization using MDD. Through Explainable AI (XAI) techniques such as t-SNE and other metrics like Kullback Leibler Divergence (KLD), we revealed a more distinct alignment of feature spaces between the two domains after domain adaptation, emphasizing MDD’s role in enhancing model accuracy and generalization.

How crucial is big data in contemporary molecular design? In this publication we elucidate fundamental concepts and terminology in this field, critically addressing overlooked issues. We thoroughly examine the size, accessibility, quality, and structural aspects of big data alongside the primary methodologies employed for their analysis. Within chemical compounds, properties and descriptors represent two distinct data types, forming the basis for categorizing molecular big data. The primary objective of chemistry is property production, which means we are searching for novel drugs or materials rather than chemical compounds, and big data is the central issue of this philosophy. The increasing availability of data in computer-aided technology propels advancements in artificial intelligence (AI), machine learning (ML), and deep learning (DL). Accordingly, a broad chemical audience must comprehend these methods to understand data-centered chemistry. Thus, we aim to systemize big data issues through a simple illustrative framework with fundamental descriptor categories: coding, computer-generated descriptors, and property correlates. Although we employ computer-generated descriptors as big data for predictions, the measured data are irreplaceable for achieving high-quality and reliable outcomes and controlling molecular effects. The scarcity of property data remains a significant hurdle limiting comprehensive studies on the structure-property relationships within big data. Accordingly, guided by pragmatics not-so-big data is an option for drug design. We presented also a brief review of the recent big data literature.

Background: Retinal diseases such as neovascular age related macular degeneration (nAMD), diabetic macular edema (DME) or branch-/central retinal vein occlusion (B/CRVO) have significant implications for patients' social and psychological well-being. To gain a comprehensive understanding of patients' backgrounds and attitudes, we developed an exploratory questionnaire, the Basic Care and Patient Satisfaction Questionnaire (BPZ-9). Methods: The ALBATROS study aimed to assess the care situation of treatment-naïve patients diagnosed with either nAMD, DME or B/CRVO. The data collection took place at the beginning of treatment and after twelve months of anti-VEGF (vascular endothelial growth factor) therapy. The BPZ-9 instrument comprises nine questions to evaluate patients’ psychological and social situation and their satisfaction with treatment. Results: Data were collected from 1.478 nAMD (mean 78 years), 445 DME (67 years), 233 BRVO (70 years) and 144 CRVO (71 years) patients at 102 study centers throughout Germany. Approximately one third of the patients was living alone and six percent were in organized care. One in four patients had difficulties to walk and one in five needed accompany for treatment. Anxiety to lose vision was present in three out of four patients at the beginning and slightly decreased to two out of three over the 12-month treatment preriod. The distress of having a retinal disease was generally higher than the distress related to treatment. Most patients reported high treatment satisfaction (73%) and felt well informed (81%). Conclusion: Patients receiving anti-VEGF therapy commonly experience impaired mobility, dependency on others, distress and the fear of vision loss.

This research aims to thoroughly understand the delicate interplay between stakeholders' perspectives, biometric data protection policies, and the deployment of face recognition technologies in Indonesia's dynamic digital world. Adopting a qualitative methodology, the study conducts Focus Group Discussions (FGDs) with various stakeholders, including government agencies, technology developers, regulatory agencies, civil society groups, and data subjects as end-users. Face-to-face group discussions facilitate an in-depth exploration of participants' perspectives, yielding rich qualitative data that reveals nuanced insights into the delicate balance between technological innovation, ethical considerations, and socioeconomic repercussions associated with implementing face recognition technology. The research comprehensively explains the difficulties and opportunities associated with responsible technological progress and biometric data security. The findings from the FGDs influence the development of strategies that effectively balance technical advancement with individual rights, privacy, and social well-being within the growing digital landscape of Indonesia. The regulatory function of the government seeks to bridge the gap between public expectations and technological advancements. Collaboration between academic institutions, government agencies, the private sector, and data subjects as end-users emerges as a crucial element, fostering an all-encompassing strategy integrating research, law, technology deployment, and user empowerment. This holistic approach is necessary to ensure that biometric data and facial recognition technology are utilized responsibly, thereby laying the way for Indonesia's technologically sophisticated and ethically aware digital future.

The 2019 COVID-19 pandemic caused by SARS-CoV-2 has resulted in many fatalities worldwide. Despite various types of supportive care, mortality rates for patients with comorbidities remain high. To explore alternative treatment options, interferons (IFNs) have emerged as promising therapeutic drugs for SARS-CoV-2. This review aims to investigate the potential of IFNs as a drug with details on their mechanisms of action, and available data on their use with ongoing clinical trials, results, potential limitations, and challenges. Recently published research articles, which were systematically searched through online databases, have been selected and found that IFNs have colossal potential in treating SARS-CoV-2 infection by modulating the host's immune response and inhibiting viral replication and decreasing the severity of disease and hospitalization (p = 0.03, ±0.05) and (p = 0.04, ±0.05) respectively. However, due to less available data, more controlled and randomized trials are needed to confirm the efficacy and safety of IFN therapy. The optimal dosing and duration of IFN therapy also remain to be determined. Although further research is needed the wait for ongoing clinical trial results under investigation is also important for a better understanding of IFN therapy.

Understanding the spatial distribution pattern and evolution characteristics of the elderly population in urban areas is of great significance for the development of urban planning and the implementation of public management policies in the context of rapid aging. Accurately identifying the spatial distribution and evolution characteristics of the elderly population in the city requires a comprehensive analysis of multiple indicators and large-scale data. Taking Wuhan city as an example, this article measures the spatial distribution characteristics and evolution trend of the elderly population from 2000 to 2020 at the street/township level, based on the fifth, sixth, and seventh census data, using methods such as kernel density hotspot detection, spatial clustering analysis, and standard deviation ellipse analysis. The results show that: ① there are significant differences in the aging spatial pattern between the central area and the suburban areas of Wuhan; ② overall, Wuhan's aging rate shows a typical "core-periphery" growth mode in space, while the density of the elderly population has significant spatial aggregation characteristics and shows an evolution trend of "centralized concentration, peripheral outliers, axial development, and near-field growth"; ③the center of gravity of the elderly population remains relatively stable over time.

Here, one hundred patients (50 smokers and 50 non-smokers) clinically diagnosed with COVID-19 were studied. Yet, bioinformatics was used to predict epitopes on Tobacco mosaic virus coat protein (TMV-CP) to produce antibodies towards SARS-CoV-2. Death was three times higher in non-smokers than in smokers. However, biochemical parameters did not separate the groups. Bioinformatics analysis predicted the presence of B-cell epitopes in TMV-CP, suggesting the production of antibodies anti-TMV-CP in smoker patients. Smokers may develop severe forms of COVID-19, but survival was superior in the evaluated group than in non-smokers. Anti-TMV-CP antibodies, potentially present in smokers, might act as a pro-immune agent against SARS-CoV-2 at earlier stages of infection. These data are helpful for future studies assessing COVID-19 in smokers.

Orbitrap mass spectrometers have been widely used in environmental component analysis . This paper presents an enhanced data acquisition system for in-situ detection of Orbitrap mass spectrometry, which enables in-suit real-time signal processing and analysis for atmospheric molecules with small mass numbers.During previous space atmospheric explorations, quadrupole mass spectrometry (QMS) was usually utilized for analyzing isotopic compositions and complicated compounds in the mixture. However, the inevitable ion scattering and drift during mass transfer, as well as the QMS attenuator loss, result in a relatively lower signal-to-noise ratio of the produced mass spectrum. In recent years, a novel mass spectrometer, called an Orbitrap mass spectrometer, has been gradually accepted and used because of its non-destructive detection ability, high mass resolution, and accuracy. Nevertheless, Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) is preferred over the Orbitrap mass spectrometry for ground applications, especially for detecting low-mass components (e.g. below 50 atomic mass units) due to the former’s superior resolution. As the mass number decreases, the detection system demands a higher sampling and processing rate. Additionally, in ground-based scenarios, mass spectrometry analysis software on computers is often employed to analyze the signals. Therefore, in order to achieve in-situ detection of the space atmospheric environment using the Orbitrap mass spectrometer, this paper proposes a real-time signal acquisition and processing system for mass spectrometry analysis. The system comprises of signal conditioning circuits, analog-to-digital conversion circuits, programmable logic circuits, and related software. These components perform spectrum analysis and process the signal in real-time on hardware components, allowing for high-speed acquisition and analysis of the signals produced by the Orbitrap mass spectrometer.

Migratory movements are a political, social and public health issue on a global scale. Access to sexual and reproductive health services for irregular migrant women (IMW) is a public health issue. The aim of this study is to identify qualitative evidence on IMW's experiences of sexual and reproductive health care in emergency and primary care settings. Methods: meta-synthesis of qualitative studies. Synthesis includes assembling and categorising findings based on the simili-arty in meaning. The search was conducted between January 2010 and June 2022 using PubMed, WOS and CINAHL databases. Results: of 131 articles found in the initial search, only 9 articles met the criteria and were included in the review. Four main themes were established: (1) The need to focus emergency care on sexual and reproductive health, (2) Unsatisfactory clinical experiences, (3) Forced reproduction, (4) Alternating between formal and informal healthcare services. Con-clusions: IMW’s attitudes towards sexual and reproductive health are influenced by culture, ed-ucational level, fear, barriers and the attitude of healthcare providers. Healthcare institutions need to be aware of the IMW’s experiences to understand the specific difficulties they face. IMW call for socially and culturally sensitive health care, cultural mediators, improved communication and safe environments that ensure confidentiality.

This study presents a detailed assessment on the impact of the Brazilian legal framework related to the access and benefit sharing provisions of the UN Convention on Biological Diversity. The research is based on a comprehensive dataset that was systematically collected over several years, directly from the official government bodies responsible for its implementation. The aim of the study is to contribute to a fact-based discussion on the effectiveness of national ABS laws, focusing on the Brazilian legal framework, first established in the year 2000 and revised in 2015, as a case example. This study balances the costs and benefits of the Brazilian ABS system and assesses the regulatory challenges it poses to individuals, companies, and institutions that perform research, share knowledge, develop, manufacture or market products derived from Brazilian biodiversity. The study indicates that, after over 22 years of operation, the regulatory challenges are still real and relevant, and that the significant volume of data collected from users on access, prior commercialization and shipment of genetic materials abroad was never systematically assessed by the agencies in charge. Besides, it shows that the costs incurred by the government in managing the policy itself have been higher than the economic benefits it has made possible, and that the institutional mechanisms in place since 2015 have not been able to allocate the monetary benefits contributed by users to the National Benefit Sharing Fund to any projects aimed at developing sustainable uses or preserving Brazilian biodiversity.

Retweet prediction is an important task related to different problems such as information spreading analysis, the automatic detection of fake news, social media monitoring, etc. In this study we explore the possibilities of retweet prediction based on heterogeneous data sources. In order to classify the tweet according to the amount of retweets, we combine features extracted from the multilayer network and the text. More specifically, we introduce a multilayer framework that proposes the multilayer network representation of Twitter. This formalism captures different users' actions and complex relationships as well as other key properties of communication on Twitter. We select a set of local network measures from each layer and construct a set of multilayer network features. In addition, we adopt a BERT-based language model, namely Cro-CoV-cseBERT to capture high-level semantics and structure of tweets as a set of text features. Then, we train six machine learning (ML) algorithms: random forest, multilayer perceptron, light gradient boosting machine, category embedding model, neural oblivious decision ensembles and attentive interpretable tabular learning model in the task of retweet prediction. We compare the performance of all six algorithms in three different setups (i) using only text features, (ii) using only multilayer network features and (iii) using both sets of features. We evaluate all setups in terms of standard evaluation measures i.e. precision, recall, F1-score and accuracy. For this task, we first prepare and use an empirical dataset of 199,431 tweets in the Croatian language posted during the period between January 1, 2020 and May 31, 2021. Our results indicate that by integrating multilayer network features with text features the prediction model would perform better than using just one set of features.

Background Content marketing is increasingly important for online branding. Brand popularity can be more easily determined online than sales-based measures but is not yet well-explained from a content marketing perspective. Promising predictors are open data syndication policies, connectivity to e-commerce platforms, product reviews, data health, and the depth and width of a brands product portfolio. A predictive content marketing model can help brand owners to understand their e-commerce potential. Methods We used brand popularity (Brand Popularity Rank) and catalog data in combination with product reviews from an independent content aggregator. For all datasets, we selected the overlapping dataset for brand popularity and brand reviews based on a period of 90 days from June 10, 2022, till September 24, 2022 (n = 333 brands). Backward stepwise multiple linear regression was used to develop a predictive content marketing model of the Brand Popularity Rank. Results Through stepwise backward multiple linear regression five highly significant (p < 0.01) predictive factors for brand rank are selected in our content marketing model: the brand’s data syndication policy, the number of connected e-commerce platforms, a brand’s number of products, its number of products per category, and the number of product categories in which it is active. Our model explains 78% of the variance of Brand Popularity Rank and has a good and highly significant fit: F (5, 327) = 233.5, p < 0.00001. Conclusions We conclude that a content marketing model can adequately predict a Brand Popularity Rank based on online popularity. In this model an open content syndication policy, more connected e-commerce platforms, and catalog size, i.e., presence in more categories and more products per category are each related to a better (lower) Brand Popularity Rank score.

To scientifically and effectively evaluate the service capacity of expressway service areas (ESAs) and improve the management level of ESAs, we propose a method for the recognition of vehicles entering ESAs (VeESAs) and estimation of vehicle dwell times using ETC data. First, the ETC data and their advantages are described in detail, and then the cleaning rules are designed according to the characteristics of the ETC data. Second, we established feature engineering according to the characteristics of VeESA, and proposed the XGBoost-based VeESA recognition (VR-XGBoost) model. Studied the driving rules in depth, we constructed a kinematics-based vehicle dwell time estimation (K-VDTE) model. The field validation in Part A/B of Yangli ESA using real ETC transaction data demonstrates that the effectiveness of our proposal outperforms the current state of the art. Specifically, in Part A and Part B, the recognition accuracies of VR-XGBoost are 95.9% and 97.4%, respectively, the mean absolute errors (MAEs) of dwell time are 52 s and 14 s, respectively, and the root mean square errors (RMSEs) are 69 s and 22 s, respectively. In addition, the confidence level of controlling the MAE of dwell time within 2 minutes is more than 97%. This work can effectively identify the VeESA, and accurately estimate the dwell time, which can provide a reference idea and theoretical basis for the service capacity evaluation and layout optimization of the ESA.

By solving a Marchenko equation, Green's functions at an arbitrary (inner) depth level inside an unknown elastic layered medium can be retrieved from single-sided reflection data, which are to be collected at the top of the medium. So far, an exact solution could only be obtained if the medium obeys stringent monotonicity conditions and if all forward-scattered (non-converted and converted) transmissions between the acquisition level and the inner depth level are known a-priori. We introduce an alternative Marchenko equation by revising the window operators that are applied in its derivation. We also introduce an auxiliary equation for transmission data, which are to be collected at the bottom of the medium, and a coupled equation, which is based on both reflection and transmission data. We show that the joint system of the Marchenko equation, the auxiliary equation and the coupled equation can be succesfully inverted when broadband reflection and transmission data are available. This results in a novel methodology for elastodynamic Green's function retrieval from two-sided data. Apart from these data, our approach requires P- and S-wave transmission times between the inner depth level and the top of the medium, as well as two angle-dependent amplitude scaling factors, which can be estimated from the data by enforcing energy conservation.

In ref. [1], we pointed out that certain anomalies observed in the published data for ac magnetic susceptibility of a room temperature superconductor reported in Nature 586, 373 (2020) [2] would be cleared up once the measured raw data were made available. Part of the measured raw data were recently posted in arXiv:2111.15017 [3]. Here we report the results of our analysis of these raw data and our conclusion that they are incompatible with the published data. Implications of these results to the claim that the material is a room temperature superconductor are discussed.

This article proposes a measurement solution designed to monitor instantaneous frequency in power systems. It uses a data acquisition module and a GPS receiver for time stamping. A program in Python takes care of receiving the data, calculating the frequency, and finally transferring the measurement results to a database. The frequency is calculated with two different methods, which are compared in the article. The stored data is visualized using the Grafana platform, thus demonstrating its potential for comparing scientific data. The system as a whole constitutes an efficient low cost solution as a data acquisition system.

Molecular Dynamics (MD) simulations model motion of molecules in atomistic detail and aid in drug design. While simulations on large systems may require several days to complete, analysis of terabytes of data generated in the process could also be time consuming. Recent studies captured exciting and dramatic drug-receptor interactions under cell-like complex conditions. Such advances make simulations of biomolecular interactions more realistic, insightful, and informative and have potential to make drug design more realistic. However, currently available resources and techniques do not provide, in reasonable time, a comprehensive understanding of events seen in simulations. We demonstrate that big data approach results in significant speedups, and provides rapid insights into simulations performed. Advancing this improvement, we propose a scalable, self-tuning, and responsive framework based on Cloud-infrastructure to accomplish the best possible MD studies with given priorities and within available resources.

There are many new land use and land cover (LULC) products emerging yet there is still a lack of in-situ data for training, validation, and change detection purposes. The LUCAS (Land Use Cover Area frame Sample) survey is one of the few authoritative in-situ field campaigns, which takes place every three years in European Union member countries. More recently, a study has considered whether citizen science and crowdsourcing could complement LUCAS survey data, e.g., through the FotoQuest Austria mobile app and crowdsourcing campaign. Although the data obtained from the campaign were promising when compared with authoritative LUCAS survey data, there were classes that were not well classified by the citizens, and the photographs submitted through the app were not always of sufficient quality. For this reason, in the latest FotoQuest Go Europe 2018 campaign, several improvements were made to the app to facilitate interaction with the citizens contributing and to improve their accuracy in LULC identification. In addition to extending the locations from Austria to Europe, a change detection component (comparing land cover in 2018 to the 2015 LUCAS photographs) was added, as well as an improved LC decision tree and a near real-time quality assurance system to provide feedback on the distance to the target location, the LULC classes chosen and the quality of the photographs. Another modification was the implementation of a monetary incentive scheme in which users received between 1 to 3 Euros for each successfully completed quest of sufficient quality. The purpose of this paper is to present these new features and to compare the results obtained by the citizens with authoritative LUCAS data from 2018 in terms of LULC and change in LC. We also compared the results between the FotoQuest campaigns in 2015 and 2018 and found a significant improvement in 2018, i.e., a much higher match of LC between FotoQuest Go Europe and LUCAS. Finally, we present the results from a user survey to discuss challenges encountered during the campaign and what further improvements could be made in the future, including better in-app navigation and offline maps, making FotoQuest a model for enabling the collection of large amounts of land cover data at a low cost.

Investigating and classifying sentiments of social media users (e.g., positive, negative) towards an item, situation, and system are very popular among the researchers. However, they rarely discuss the underlying socioeconomic factor associations for such sentiments. This study attempts to explore the factors associated with positive and negative sentiments of the people about reopening the economy, in the United States (US) amidst the COVID-19 global crisis. It takes into consideration the situational uncertainties (i.e., changes in work and travel pattern due to lockdown policies), economic downturn and associated trauma, and emotional factors such as depression. To understand the sentiment of the people about the reopening economy, Twitter data was collected, representing the 51 states including Washington DC of the US. State-wide socioeconomic characteristics of the people (e.g., education, income, family size, and employment status), built environment data (e.g., population density), and the number of COVID-19 related cases were collected and integrated with Twitter data to perform the analysis. A binary logit model was used to identify the factors that influence people toward a positive or negative sentiment. The results from the logit model demonstrate that family households, people with low education levels, people in the labor force, low-income people, and people with higher house rent are more interested in reopening the economy. In contrast, households with a high number of members and high income are less interested to reopen the economy. The accuracy of the model is good (i.e., the model can correctly classify 56.18\% of the sentiments). The Pearson chi2 test indicates that overall this model has high goodness-of-fit. This study provides a clear indication to the policymakers where to allocate resources and what policy options they can undertake to improve the socioeconomic situations of the people and mitigate the impacts of pandemics in the current situation and as well as in the future.

Various empirical models are available to evaluate the temperature effects on relative permeability of the different rock and fluid systems. However, the implementation of limited experimental data points may hinder the applicability of such models to other systems. This study aims to develop new predictive models for k_ro estimation based on multilayer perceptron artificial neural network (MLP-ANN), adaptive neuro-fuzzy inference system (ANFIS), and least squares support vector machine (LSSVM) approaches. A database comprising of 626 data points applied to the model development. The independent variables are temperature, oil viscosity, water viscosity, water saturation ( ), and the absolute permeability. Each variable covers a wide range of variations which increases models’ potential to be applied in various systems with different characteristics. The doubtful experimental data points excluded using a leverage value approach and a sensitivity analysis carried out to determine the quantitative impact of every individual independent variable on the k_ro. Statistical error analyses demonstrated the coefficient of determination (R²) values of 0.985, 0.975, and 0.999 for MLP-ANN, ANFIS, and LSSVM, respectively. The comparative study indicated that the LSSVM had the best performance regarding both graphical and statistical error analyses among the newly proposed models and previously reported models in the literature.

This research describes numerical methods to analyze the absolute transport demand of cyclists and then to quantify the road network weaknesses of a city with the aim to identify infrastructure improvements in favor of cyclists. The methods are based on a combination of bicycle counts and map-matched GPS traces and are demonstrated with the city of Bologna, Italy: the dataset is based on approximately 27,500 GPS traces from cyclists, recorded over a period of one month on a volunteer basis using a smartphone application. A first method estimates absolute, city-wide bicycle flows, by scaling map-matched bicycle flows of the entire network to manual and instrumental bicycle counts of the main bikeways of the city. As there is a good correlation between the two sources of flow data, the absolute bike-flows on the entire network have been correctly estimated. A second method describes a novel link-deviation index, which quantifies for each network edge the total deviation generated for cyclists in terms of extra distances traveled with respect to the shortest possible route. The deviations are accepted by cyclists either to avoid unpleasant road attributes along the shortest route or to experience more favorable road attributes along the chosen route. The link deviation index indicates the planner which road links are contributing most to the total deviation of all cyclists – in this way, repelling and attracting road attributes for cyclists can be identified. This is why the deviation index is of practical help to prioritize bike infrastructure construction on individual road network links.

Floods are one of the most wide-spread, frequent, and devastating natural disasters that continue to increase in frequency and intensity. Remote sensing, specifically synthetic aperture radar (SAR), has been widely used to detect surface water inundation to provide retrospective and near-real time (NRT) information due to its high-spatial resolution, self-illumination, and low atmospheric attenuation. However, the efficacy of flood inundation mapping with SAR is susceptible to reflections and scattering from a variety of factors including dense vegetation and urban areas. In this study, the topographic dataset height above nearest drainage (HAND) was investigated as a potential supplement to Sentinel-1A C-Band SAR along with supervised machine learning to improve the detection of inundation in heterogeneous areas. Three machine learning classifiers were trained on two sets of features SAR only (VV & VH) and VV, VH & HAND to map inundated areas. Three study sites along the Neuse River in North Carolina, USA during the record flood of Hurricane Matthew in October 2016 were selected. The binary classification analysis (inundated as positive vs. non-inundated as negative) revealed significant improvements when incorporating HAND in several metrics including classification accuracy (ACC) (+37.1%), true positive rate (TPR) (+51.2%), and negative predictive value (NPV) (+23.7%), A marginal improvement of +1.4% was seen for positive predictive value (PPV), but true negative rate (TNR) fell -15.1%. By incorporating HAND, a significant number of areas with high SAR backscatter but low HAND values were detected as inundated which increased true positives. This in turn also increased the false positives detected but to a lesser extent as evident in the metrics. This study demonstrates that HAND could be considered a valuable feature to enhance SAR flood inundation mapping especially in areas with heterogeneous land covers with dense vegetation that interfere with SAR.

The assimilation of Soil Moisture and Ocean Salinity (SMOS) data into the ECMWF (European Centre for Medium Range Weather Forecasts) H-TESSEL (Hydrology revised - Tiled ECMWF Scheme for Surface Exchanges over Land) model is presented. SMOS soil moisture (SM) estimates have been produced specifically by training a neural network with SMOS brightness temperatures as input and H-TESSEL model SM simulations as reference. This can help the assimilation of SMOS information in several ways: (1) the neural network soil moisture (NNSM) data have a similar climatology to the model, (2) no global bias is present with respect to the model even if regional differences can exist. Experiments performing joint data assimilation (DA) of NNSM, 2 metre air temperature and relative humidity or NNSM-only DA are discussed. The resulting SM was evaluated against a large number of in situ measurements of SM obtaining similar results to those of the model with no assimilation, even if significant differences were found from site to site. In addition, atmospheric forecasts initialized with H-TESSEL runs (without DA) or with the analysed SM were compared to measure of the impact of the satellite information. Although, NNSM DA has an overall neutral impact in the forecast in the Tropics, a significant positive impact was found in other areas and periods, especially in regions with limited in situ information. The joint NNSM, T2m and RH2m DA improves the forecast for all the seasons in the Southern Hemisphere. The impact is mostly due to T2m and RH2m, but SMOS NN DA alone also improves the forecast in July- September. In the Northern Hemisphere, the joint NNSM, T2m and RH2m DA improves the forecast in April-September, while NNSM alone has a significant positive effect in July-September. Furthermore, forecasting skill maps show that SMOS NNSM improves the forecast in North America and in Northern Asia for up to 72 hours lead time.

It's challenging to achieve robust lane detection depending on single frame when considering complicated scenarios. In order to detect more credible lane markings by using sequential frames, a novel approach to fusing vision and Inertial Measurement Unit (IMU) is proposed in this paper. The hough space is employed as the space where lane markings are stored and it's calculated by three steps. Firstly, a basic hough space is extracted by Hough Transform and primary line segments are extracted from it. In order to measure the possibility about line segments belong to lane markings, a CNNs based classifier is introduced to transform the basic hough space into a probabilistic space by using the networks outputs. However, this probabilistic hough space based on single frame is easily disturbed. In the third step, a filtering process is employed to smooth the probabilistic hough space by using sequential information. Pose information provided by IMU is applied to align hough spaces extracted at different times to each other. The final hough space is used to eliminate line segments with low possibility and output those with high confidence as the result. Experiments demonstrate that the proposed approach has achieved a good performance.

This paper focuses on the crucial role that remote sensing plays in divining land features. Data that is collected distantly provides information in spectral, spatial, temporal and radiometric domains, with each domain having the specific resolution to information collected. Diverse sectors such as hydrology, geology, agriculture, land cover mapping, forestry, urban development and planning, oceanography and others are known to use and rely on information that is gathered remotely from different sensors. In the present study, IRS LISS IV Multi-spectral data is used for land cover mapping. It is known, however, that the task of classifying high-resolution imagery of land cover through manual digitizing consumes time and is way too costly. Therefore, this paper proposes accomplishing classifications by way of enforcing algorithms in computers. These classifications fall in three classes: supervised, unsupervised, and object-based classification. In the case of supervised classification, two approaches are relied upon for land cover classification of high-resolution LISS-IV multispectral image. These approaches are Maximum Likelihood and Support Vector Machine (SVM). Finally, the paper proposes a step-by-step procedure for optical image classification methodology. This paper concludes that in optical data classification, SVM classification gives a better result than the ML classification technique.

Data creation is often the only way for researchers to produce basic geospatial information for the pursuit of more complex tasks and procedures such as those that lead to the production of new data for studies concerning river basins, slope morphodynamics, applied geomorphology and geology, urban and territorial planning, detailed studies, for example, in architecture and civil engineering, among others. This exercise results from a reflection where specific data processing tasks executed in Google Sketchup (Pro version, 2018) can be used in a context of interoperability with Geographical Information Systems (GIS) software. The focus is based on the production of contour lines and Digital Elevation Models (DEM) using an innovative sequence of tasks and procedures in both environments (GS and GIS). It starts in Google Sketchup (GS) graphic interface, with the selection of a satellite image referring to the study area—which can be anywhere on Earth's surface; subsequent processing steps lead to the production of elevation data at the selected scale and equidistance. This new data must be exported to GIS software in vector formats such as Autodesk Design Web format—DWG or Autodesk Drawing Exchange format—DXF. In this essay the option for the use of GIS Open Source Software (gvSIG and QGIS) was made. Correcting the original SHP by removing “data noise” that resulted from DXF file conversion permits the author to create new clean vector data in SHP format and, at a later stage, generate DEM data. This means that new elevation data becomes available, using simple but intuitive and interoperable procedures and techniques which confgures a costless work flow.

Purpose: To create a highly balanced comparison of ab interno trabeculectomy (Trabectome, AIT) and trabecular bypass stenting (iStent, TBS).Setting: Eye and Ear Institute, Pittsburgh, Ross Eye Institute, Buffalo, and Glaucoma Associates of Texas, Dallas, USA.Design: Retrospective Exact Matching analysis.Methods: AIT and TBS patients were included from three large glaucoma practices. The primary outcome measure was the unmedicated IOP ≤ 21 mmHg at 2-year follow-up visit. A secondary measure was unmedicated IOP reduction ≥ 20% at 2 years. Patients were matched by baseline IOP, the number of glaucoma medications and glaucoma type using Exact Matching and by age using Nearest Neighbor matching. Patients without a close match were excluded. All surgeries were combined with phacoemulsification. Results: 154 AIT and 110 TBS eyes were analyzed. 48 AIT patients were exactly matched to 48 TBS patients. Both groups had a baseline IOP of 15.3±3.1 mmHg. At 24 months, the mean IOP was 13.9±3.3 for AIT versus 16.8±2.8 mmHg for TBS (p=0.04), while the number of medications was 0.7±1.0 for AIT versus 1.7±1.2 for TBS (p=0.04). The proportion of subjects achieving IOP ≤ 21 mmHg without medications at 24 months was 53% in AIT versus 16.6% in TBS (P < 0.05). At 24-month follow up 17.6% of patients in AIT had ≥ 20% IOP reduction without medication versus no patient in TBS. Conclusions: An Exact Matching comparison of AIT and TBS demonstrated greater IOP reduction with fewer medications in AIT.

Next-generation sequencing is now a mature technology, allowing partial animal genomes to be produced for many clades. Though many software exist for genome assembly and annotation, a simple pipeline that allows researchers to input raw sequencing reads in fastq format and allow the retrieval of a completely assembled and annotated mitochondrial genome is still missing. mitoMaker 1.0 is a pipeline developed in python that implements (i) recursive de novo assembly of mitochondrial genomes using a set of increasing k-mers; (ii) search for the best matching result to a target mitogenome and; (iii) performs iterative reference-based strategies to optimize the assembly. After (iv) checking for circularization and (v) positioning tRNA-Phe at the beginning, (vi) geneChecker.py module performs a complete annotation of the mitochondrial genome and provides a GenBank formatted file as output.

One of the largest in the archipelago silver-copper mineralisation at Mount Sigurdf′ellet in West Spitsbergen Island was found in 1990 by Russian geologists. Firstly genesis was caused exclusively with hydrothermal ore migration of a substance from the enclosing sandstone and siltstone of the Devonian age. But subsequent work on the ore and nearest rocks of the basement gave a new factual material on the geochemical characteristics of potential sources of metals and found new for this mineral occurrence - gold mineralization. Similarity of geochemical associations of Sigurd ore occurrence with nearby upper Proterozoic marble as the first likely source of ore substance and the second - caused by carbonate-containing streaks in Low Devonian sediments. Ore-formation, probably due to repeated hydrothermal processes and was completed in a period of tectono-magmatic activity in Jurassic-Cretaceous time.

Linear regression is a basic tool in mobile robotics, since it enables accurate estimation of straight lines from range-bearing scans or in digital images, which is a prerequisite for reliable data association and sensor fusing in the context of feature-based SLAM. This paper discusses, extends and compares existing algorithms for line fitting applicable also in case of strong covariances between the coordinates at each single data point, which must not be neglected if range-bearing sensors are used. Besides, particularly the determination of the covariance matrix is considered, which is required for stochastic modeling. The main contribution is a new error model of straight lines in closed form for calculating fast and reliably the covariance matrix dependent on just a few comprehensible and easily obtainable parameters. The model can be applied widely in any case when a line is fitted from a number of distinct points also without a-priori knowledge of the specific measurement noise. By means of extensive simulations the performance and robustness of the new model in comparison to existing approaches is shown.

An analysis of workplace accidents in the mining sector has been done using the database from the Spanish administration between the period 2005-2015 and applying data mining techniques. Data has been processed by means of the software Weka. Two scenarios were chosen regarding the accidents database, surface and underground mining. The most important variables involved in occupation accidents and their association rules have been determined. These rules are formed by several predictor variables that cause an accident, defining its characteristics and context. This study exposes the 20 most important association rules of the sector, either surface or underground mining, based on statistical confidence levels of each rule obtained by Weka. The outcomes display the most typical immediate causes with the percentage of accident basis of each association rule. The most typical immediate cause is body movement with physical effort or overexertion and type of accident is physical effort or overexertion. On the other hand, the second most important immediate cause and type of accident change in both scenarios. Data mining techniques have been proved as a very powerful tool to find out the root of the accidents, apply corrective measures and verify their effectiveness, either for public or private companies.

This paper presents a methodology to design sensor fusion parameters using real performance indicators of navigation in UAVs based on PixHawk flight controller and peripherals. This methodology and the selected performance indicators allows to find the best parameters for the fusion system of a determined configuration of sensors and a predefined real mission. The selected real platform is described with stress on available sensors and data processing software, and the experimental methodology is proposed to characterize sensor data fusion output and determine the best choice of parameters using quality measurements of tracking output with performance metrics not requiring ground truth.

Machine Learning (ML) has revolutionized healthcare by enhancing diagnostic capabilities because of its ability to analyze large datasets and detect minor patterns often overlooked by humans. This is beneficial, especially in pain recognition, where patient communication may be limited. However, ML models often face challenges such as memorization and sensitivity to adversarial examples. Regularization techniques like mixup, which trains models on convex combinations of data pairs, address these issues by enhancing model generalization. While mixup has proven effective in image, speech, and text datasets, its application to time-series signals like electrodermal activity (EDA) is less explored. This research uses ML for pain recognition with EDA signals from the BioVid Heat Pain Database to distinguish pain by applying mixup regularization to manually extracted EDA features and using a Support Vector Machine (SVM) for classification. Results showed that this approach achieved an average accuracy of 75.87% using leave-one-subject-out cross-validation (LOSOCV) compared to 74.61% without mixup. This demonstrates the mixup’s efficacy in improving ML model accuracy for pain recognition from EDA signals. This study highlights the potential of mixup in ML as a promising approach to enhance pain assessment in healthcare.

Due to the uniqueness of the underwater environment, traditional data aggregation schemes face many challenges. Most existing data aggregation solutions do not fully consider node trustworthiness, which may result in the inclusion of falsified data sent by malicious nodes during the aggregation process, thereby affecting the accuracy of the aggregated results. Additionally, because of the dynamically changing nature of the underwater environment, current solutions often lack sufficient flexibility to handle situations such as node movement and network topology changes, significantly impacting the stability and reliability of data transmission. To address the aforementioned issues, this paper proposes a secure data aggregation algorithm based on a trust mechanism. By dynamically adjusting the number and size of node slices based on node trust values and transmission distances, the proposed algorithm effectively reduces network communication overhead and improves the accuracy of data aggregation. Due to the variability in the number of node slices, even if attackers intercept some slices, it is difficult for them to reconstruct the complete data, thereby ensuring data security.

A crucial component for developing an automated speaker or speech recognition system is voice preprocessing, which filters unwanted noise and detects the speech part. This study aimed to develop a computerized model to remove background noise and improve signal quality for future applications. This model was developed on a large longitudinal dataset containing varying real-world noise and validated on both a public dataset and a locally collected test dataset in different environments. An overall voice pre-processing pipeline is presented in this study, including denoising, segmentation, feature extraction, and ease of storage. The backbone of the denoising model is a Kalman filter, where the parameters were obtained from a grid search method; the signal-to-noise ratio (SNR) was used as the performance metric. Also, the segmentation was done to remove the pauses from the audio signal before the feature extraction. Finally, the data was stored as a template with the most common features. The SNR result suggested that the Kalman filter-based proposed method performed successfully across diverse datasets. Thus, this model provides a robust and adaptable solution for real-world scenarios and also ensures the data storing quality for future applications.

This paper presents a statistical approach to identify the underlying roughness characteristics in synthetic aperture radar (SAR) intensity data. The physical modeling of this kind of data allows the use of the Gamma distribution in the presence of fully-developed speckle, i.e., when there are infinitely many independent backscatterers per resolution cell, and none dominates the return. Such areas are often called ``homogeneous'' or ``textureless'' regions. The GI0 distribution is also a widely accepted law for heterogeneous and extremely heterogeneous regions, i.e., areas where the fully-developed speckle hypotheses do not hold. We propose three test statistics to distinguish between homogeneous and inhomogeneous regions, i.e., between gamma and GI0 distributed data, both with a known number of looks. The first test statistic uses a bootstrapped non-parametric estimator of Shannon entropy, providing a robust assessment in uncertain distributional assumptions. The second test uses the classical coefficient of variation (CV). The third test uses an alternative form of estimating the CV based on the ratio of the mean absolute deviation from the median to the median. We apply our test statistic to create maps of \(p\)-values for the homogeneity hypothesis. Finally, we show that our proposal, the entropy-based test, outperforms existing methods, such as the classical CV and its alternative variant, in identifying heterogeneity when applied to both simulated and actual data.

In the age of the digital economy, the security and privacy for multimedia systems issues are increasingly manifested in the form of data. The level of data protection governance capability determines whether the security and privacy of multimedia systems can be protected. In recent years, China has introduced laws and regulations on the protection of personal information, personal privacy, data security, and cyber-security. Although data protection is still to be improved, China has been refining the provisions on data security management through practice and the adoption of supporting regulations.

This paper reviews recent literature on Spatial Data Infrastructure (SDI) for remote sensing, aiming to provide a comprehensive analysis of the state-of-the-art practices, challenges, and future directions. It also tries to find out if current projects and initiatives involving the exploitation of satellite remote sensing are still framed in the SDI concepts.

The described data set contains features from the machine control of a five-axis milling machine. The features were recorded during thirteen series productions. Each series production includes a changeover process in which the machine was set up for the production of a different product. In addition to the timestamps and the twenty recorded features derived from Numerical Control (NC) control variables, the data set also contains labels for the different production phases. For this purpose, up to 23 phases were assigned, which are based on a generalized milling process. The data set consists of thirteen .csv files, each representing a series production. The data set was recorded in a production company in the contract manufacturing sector for components with real series orders in ongoing industrial production.

Data on Stark broadening parameters, spectral line widths and shifts, for 15 multiplets of N VI, which spectral lines are broadened by collisions with electrons, protons, alpha particles (He III) and B III, B IV, B V and B VI ions, are presented. They have been calculated, using the semiclassical perturbation theory, for temperatures from 50,000 K to 2,000,000 K, and perturber densities from 1016 cm−3 up to 1024 cm−3. These data are particularly of interest for the analysis and modelling of atmospheres of hot and dense stars, as e.g. white dwarfs, and for investigation of their spectra, but also for analyis ad modelling of laser driven plasma in proton-boron fusion research.

Metabolites are at the end of the gene-transcript-protein-metabolism cascade. As such, metabo-lomics is the omic approach that offers the most direct correlation with phenotype. This allows that, where genomics, transcriptomics and proteomics fail to explain a trait, metabolomics might give an answer. Complex phenotypes, which are determined by the influence of multiple small effect alleles, are an example of these situations. Consequently, the interest in metabolomics has increased ex-ponentially in the last years. As a newer discipline, the metabolomics bioinformatics analysis pipe-lines are not as standardized as in the other omic approaches. In this review we synthesized the different steps that need to be carried out to obtain biological insight from the annotated metabolite abundance raw data. These steps were grouped in three different modules: preprocessing, statistical analyses and metabolic pathway enrichment. We included within each one of them the different state-of-the art procedures and tools that can be used depending on the characteristics of the study, providing details about the characteristics of each method has, as well as the issues the reader might encounter. Finally, we introduce genome scale metabolic modeling as a tool for obtaining pseu-do-metabolomic data in situations where its acquisition is difficult, being possible to analyze the resulting data with the modules of the described workflow.

Data obtained by Direct Numerical Simulations (DNS) of pressure-driven turbulent channel flow are studied in the range 180 ≤ Reτ≤ 10,000. Reynolds number effects on the Mean Velocity Profile (MVP) and second order statistics are analyzed with a view of finding logarithmic behavior in the overlap region or even further from the wall, well in the boundary layer’s outer region. Values of Kármán constant for the MVPs and the Townsend-Perry constants for the streamwise and spanwise fluctuation variances are determined for the Reynolds numbers considered. A data-driven model of the MVP, proposed and validated for zero pressure gradient flow over a flat plate, is employed for pressure-driven channel flow by appropriately adjusting Coles’ strength of the wake function parameter, Π. There is excellent agreement between the analytic model predictions of MVP and the DNS-computed MVP as well as of the Reynolds shear stress profile. The skin friction coefficient Cf is calculated analytically. The agreement between the analytical model predictions and the DNS-based computed discrete values of Cf is excellent.

The development of storage standards for databases of different nature and origin makes it possible to aggregate and interact with different data sources in order to obtain and show complex and thematic information to the end user. This article aims to analyze some possibilities opened up by new applications and hypothesize their possible developments. With this work, using the currently available Web technologies, we would like to verify the potential of the use of Linked Open Data in the world of WebGIS and illustrate an application that allows the user to interact with Linked Open Data through their representation on a map. Italy has a artistic and cultural heritage unique in the world and the italian Ministry of Cultural Heritage and Activities and Tourism has created and made freely available a dataset in Linked Open Data format that represents it. With the aim of enhancing and making this heritage more usable, the National Research Council (CNR) has created an application that presents this heritage via WebGIS on a map. Following criteria definable by the user, such as the duration, the subject of interest and the style of the trip, tourist itineraries are created through the places that host this heritage. New possibilities open up where the tools made available by the Web can be used together, according to pre-established sequences, to create completely new applications. This can be compared to the use of words, all known in themselves, which, according to pre-established sequences, allow us to create ever new texts.

Video lectures are becoming more popular and in demand as online classroom teaching is becoming more prevalent. Massive Open Online Courses (MOOCs), such as NPTEL, have been creating high-quality educational content that is freely accessible to students online. A large number of colleges across the country are now using NPTEL videos in their classrooms. So more video lectures are being recorded, maintained, and uploaded. These videos generally contain information about that video before the lecture begins. We generally observe that these educational videos have metadata containing five to six attributes: Institute Name, Publisher Name, Department Name, Professor Name, Subject Name, and Topic Name. It would be easy to maintain these videos if we could organize them according to their categories. The indexing of these videos based on this information is beneficial for students all around the world to efficiently utilise these videos. In this project, we are trying to get the metadata information mentioned above from the video lectures.

With the rapid development of space programs in various countries, the number of satellites in space is increasing, resulting in an increasingly complex space environment. Therefore, improving space object identification technology has become highly important. We proposes a method of applying deep learning to intelligent detection of space object. We utilize 49 authentic 3D satellite models including 16 scenarios to generate a dataset comprising 17,942 images, which contains over 500 actual satellite photos. Additionally, we acquired a substantial amount of annotated data using a semi-automatic labeling method, which resulted in significant labor cost savings, and obtained a total of 39,000 labels. We validate the feasibility of the dataset using YOLOv3 and YOLOv7 models. What's more, we optimize the YOLOv7 model by integrating deformable convolution RepPoint into the YOLOv7 backbone to obtain the YOLOv7-R model. Through training with these two models, experimental results show that YOLOv3 achieves an accuracy of 0.927, YOLOv7 reaches an accuracy of 0.964, and YOLOv7-R achieves the highest accuracy at 0.983. This provides an effective solution for intelligent space object detection.

Life Cycle Assessment (LCA) methodology is increasingly prevalent in the quantification of environmental status in the building sector, following new legislative frameworks. Countries need to quantify and assess their environmental impacts as a previous base for regulation and decision making. In this context, standardised national data sets are being developed, based on consensus with manufacturers: sectoral Environmental Product Declarations. This study focuses on assessing these EPDs with the aim of providing relevant information for global decision-making, focusing on consistency and pointing out shortcomings. An assessment has been carried out both at national level, considering all sectoral EPDs and declared products, and at international level, with three common building materials (brick, steel and concrete). The results highlight the lack of traceability in the development and assessment of uncertainty, resulting in substantial discrepancies in reported impacts, especially in the later stages of the life cycle (up to 90% difference). Meanwhile, impacts such as Global Warming Potential or total renewable and non-renewable primary energy use show homogeneous values in the cradle-to-gate stages with differences generally less than 10%. The analysis of sectoral EPDs should be a design guide with environmental sustainability criteria, as the last section of this study attempts to focus on.

Understanding microbial composition in upper respiratory infections (URIs) is critical for effective diagnosis and treatment. Precision Metagenomic next-generation sequencing p(mNGS) can provide a comprehensive yet clinically relevant profile of respiratory infection. The hybridization capture-based targeted sequencing generated a precision metagenomics profile of 29 patients with acute URIs. Nasopharyngeal samples were collected from the subjects suspected of respiratory infection, and p(mNGS) was performed using the Illumina®/IDbyDNA Respiratory Pathogen ID/AMR Panel (RPIP). The dataset obtained from the mNGS analysis contains a wealth of information on the composition of acute URI microbiota, including the relative abundance of known pathogens and potential clinical implications. The dataset represents a valuable resource for future research endeavors in respiratory medicine, infectious disease epidemiology, and therapeutic interventions. In addition, the dataset offers significant potential for reuse and integration with other omics datasets. The comprehensive nature of the mNGS data allows the exploration of associations between the respiratory microbiota and host factors such as clinical outcomes, immune responses, or genetic predisposition. Combining this dataset with other relevant datasets, such as transcriptomics or metabolomics, could provide a deeper understanding of the complex interactions between the microbiota and the host in acute URIs.

Droughts are among the major natural hazards that are spreading to many parts of the world with huge multi-dimensional impacts. For Continental Croatia an extensive analysis of drought phenomenon is presented based on meteorological E-OBS gridded dataset (0.25° x 0.25°), within the period of 1950 to 2022. The drought events were characterized by the Standardized Precipita-tion Evapotranspiration Index (SPEI) applied to different time-scales (6 and 12 months) in order to describe the subannual and annual variability of drought. The spatiotemporal patterns of drought are obtained through principal component analysis (PCA) and K-means clustering (KMC) applied to the SPEI field. An areal drought evolution analysis and the changes in the frequency of occur-rence of the periods under drought conditions were achieved by using a kernel occurrence rate es-timator (KORE). The Modified Mann-Kendall (MMK) test coupled with the Sen’s slope estimator test are applied to the SPEI series in order to quantify the drought trends throughout the country. According to drought events history and considering the different morphoclimatic characteristics of the study area the results showed that Croatia could be divided into three different and spatial-ly well-defined regions with specific temporal and spatial characteristics of droughts (Central North, Eastern and Southern regions). It is shown that there is a manifest increase in the percent-age of area affected by drought as well as in the yearly drought occurrences rates in both Central North and Eastern regions and an evident decrease in the Southern region for both 6 and 12 month SPEI time-scales. In the observation of the drought temporal characteristics, it was found that downward trends expressing increasing drought severities were strongly significant in North and Eastern regions while a few significant upward trends were seen in Southern region. From this study, it is possible to obtain a broader view of the historical behaviour of droughts in Croatia with results providing useful support for drought risk assessment and decision-making processes.

A large amount of raw data collected by satellites is processed by the production chain to obtain a large amount of product data, of which the secure exchange and storage is of interest to researchers in the field of remote sensing information science. Authentic, secure data is a critical foundation for data analysis and decision-making. And traditional centralized cloud computing systems are vulnerable to attacks, and once the central server is successfully attacked, all data will be lost. Distributed Ledger Technology (DLT) is an innovative computer technology that can ensure information security, traceability and tamper-proof, and can be applied to the field of remote sensing. Although there are many advantages to using DLT in remote sensing applications, there are some obstacles and limitations to its application. Remote sensing data has the characteristics of large data volume, spatiotemporal nature, global and so on, and it is difficult to store and interconnect remote sensing data in the blockchain. To address these issues, this paper proposes a trustworthy and decentralized system using blockchain. The novelty of this paper is to propose a multi-level blockchain architecture in which the system collects remote sensing data and stores it in the Interplanetary File System (IPFS) network, after generating the IPFS hash, the network rehashes the value again and uploads it on the Ethereum chain for public query. Distributed data storage improves data security, supports the secure exchange of information, and improves the efficiency of data management.

This paper presents a systematic approach to developing big data analytics for manufacturing process-relevant decision-making activities from the perspective of smart manufacturing. The proposed analytics consists of five integrated system components: 1) data preparation system, 2) data exploration system, 3) data visualization system, 4) data analysis system, and 5) knowledge extraction system. The functional requirements of the integrated systems are elucidated. In addition, JAVA- and spreadsheet-based systems are developed to realize the proposed integrated system components. Finally, the efficacy of the analytics is demonstrated using a case study where the goal is to determine the optimal material removal conditions of a dry electrical discharge machining operation. The analytics identified the variables (among voltage, current, pulse-off time, gas pressure, and rotational speed) that effectively maximize the material removal rate. It also identified the variables that do not contribute to the optimization process. The analytics also quantified the underlying uncertainty. In synopsis, the proposed approach results in transparent, big-data-inequality-free, and less resource-dependent data analytics, which is desirable for small and medium enterprises—the actual sites where machining is carried out.

There is increasing evidence that many molecular processes exhibit differences with age 1 and sex. Such differences produces also differences in the insurgence and progression of many 2 complex diseases. For instances, demographic data on insurgence of comorbidities of mellitus 3 diabetes, on lethality of COVID-19, and on some cancers, shows differences between sex and age 4 groups. Therefore, the growing interest on such area requires the management of related data as 5 well as the development of algorithms and tool for the analysis. The availability of omics data 6 annotated with metadata related to age and sex is mandatory for building pipeline of the analysis. 7 The number of databases containing data related to age and sex is hencefort growing. We here show 8 some databases and tools storing such data. Finally, future research direction are highlighte

Neural networks require a large quantity of training spectra and detector responses in order to learn to solve the inverse problem of neutron spectrum unfolding. In addition, due to the under-determined nature of unfolding, non-physical spectra which would not be encountered in usage should not be included in the training set. While physically realistic training spectra are commonly determined experimentally or generated through Monte Carlo simulation, this can become prohibitively expensive when considering the quantity of spectra needed to effectively train an unfolding network. In this paper, we present three algorithms for the generation of large quantities of realistic and physically motivated neutron energy spectra. Using an IAEA compendium of 251 spectra, we compare the unfolding performance of neural networks trained on spectra from these algorithms, when unfolding real-world spectra, to two baselines. We also investigate general methods for evaluating the performance of and optimizing feature engineering algorithms.

Most real-time terrain point cloud rendering techniques do not address the empty space between the points but rather try to minimize it by changing the way how the points are rendered by either rendering them bigger or with more appropriate shapes such as paraboloids. In this work, we propose an alternative approach to point cloud rendering, which addresses the empty space between the points and tries to fill it with appropriate values to achieve the best possible output. The proposed approach runs in real time and outperforms several existing point cloud rendering techniques in terms of speed and render quality.

InSAR and associated analytic methods enable relative surface deformation measurements from low Earth orbit with a potential accuracy of centimeters to millimeters. However, assessing the actual accuracy of individual points can be quite difficult. The analytic methods are complicated enough that na¨ıve analytic error propagation is infeasible, and, in many settings, InSAR practitioners lack sufficient ground truth to assess results. Phase noise due to partial decorrelation from changes in the scattering properties of the ground is a prominent source of accuracy loss. In this paper we present a method to assess the loss of precision due to this component of phase noise. The proposed method consists of generating synthetic data whose statistical properties match that of the actual input SAR data stacks, and then using the synthetic data for an ensemble calculation. The spread of the results of the ensemble calculation indicates the loss of precision. We show examples of the ensemble analysis at a mining operation in South Africa, and demonstrate the ability to assess the most reliable methods for particular points of interest using this ensemble analysis and the ability to filter out points based on the width of the spread of results

This research refers to the creation of a method of medical technology such as a device that can collect, encode, temporarily store, and transfer electroencephalographic signals from epileptic patients for study and evaluation. For applying the specific apparatus related to neurostimulation technologies such as Deep Brain Stimulation (DBS) and Responsive Neurostimulation (RNS) the approaches followed concern three basic levels. The first level is concerned with initial modelling and creating the template for the following two stages. Further on, the second level is based on developing code for programming integrated circuits and simulation with the appropriate software. The third and final stage is the most substantial, as the transmitter’s construction is attempted at the evaluation level. In particular, more than one software and device are involved in this phase for the most realistic performance of the desired result. However, it is worth noting that the principal goal of this study is to achieve low consumption rates for the device’s complete and smooth operation. As a result, this research aims to evolve this device so that it can send data wirelessly and simultaneously provide energy efficiency.

Document classification is one of the most critical steps in the document analysis pipeline. There are two types of approaches for document classification, known as image-based and multimodal approaches. The image-based document classification approaches are solely based on the inherent visual cues of the document images. In contrast, the multimodal approach co-learns the visual and textual features, and it has proved to be more effective. Nonetheless, these approaches require a huge amount of data. This paper presents a novel approach for document classification that works with a small amount of data and outperforms other approaches. The proposed approach incorporates a hierarchical attention network(HAN) for the textual stream and the EfficientNet-B0 for the image stream. The hierarchical attention network in the textual stream uses the dynamic word embedding through fine-tuned BERT. HAN incorporates both the word level and sentence level features. While the earlier approaches rely on training on a large corpus (RVL-CDIP), we show that our approach works with a small amount of data (Tobacco-3482). To this end, we trained the neural network at Tobacco-3428 from scratch. Thereby, we outperform state-of-the-art by obtaining an accuracy of 90.3%. This results in a relative error reduction rate of 7.9%.

By applying a running average (with a window-size= d), we could transform Discrete data to broad-range, Continuous values. When we have more than 2 columns and one of them is containing data about the tags of classification (Class Column), we could compare and sort the features (Non-class Columns) based on the R2 coefficient of the regression for running averages. The parameters tuning could help us to select the best features (the non-class columns which have the best correlation with the Class Column). “Window size” and “Ordering” could be tuned to achieve the goal. this optimization problem is hard and we need an Algorithm (or Heuristics) for simplifying this tuning. We demonstrate a novel heuristics, Called Simulated Distillation (SimulaD), which could help us to gain a somehow good results with this optimization problem.

The newly discovered coronavirus (COVID-19) has disrupted traditional methods of conducting research, particularly qualitative research. However, there remains a number of methods by which qualitative data can still be collected. These include the use of digital voice, video, and text-based tools, online surveys, and content analysis. Text-based sources can help to overcome the limitations of time and space, and also can be cost-effective. This chapter draws from data collected from 12 participants across Zimbabwe and demonstrates how these tools can be used to generate data or to sample data that is already available to satisfy research questions and meet research objectives. It recommends researchers to experiment with new ways of collecting qualitative data while also observing safety protocols and ethical considerations.

A smartphone plummeted from a stratospheric height of 36 km (~119,000 feet), providing a complete record of its rapid descent and abrupt deceleration when it hit the ground. The smartphone was configured to collect internal sensor data at high rates. We discuss the state-of-the-art of smartphone environmental and sensing capabilities at the closing of year 2020 and present a flexible mobile sensor data model. The associated open-source application programing interface (API) and python software development kit (SDK) used in this work is transportable to any hardware platform and operating system.

Discrete, logic-based models are increasingly used to describe biological mechanisms. Initially introduced to study gene regulation, these models evolved to cover various molecular mechanisms, such as signalling, transcription factor cooperativity, and even metabolic processes. The abstract nature and amenability of discrete models to robust mathematical analyses make them appropriate for addressing a wide range of complex biological problems. Recent technological breakthroughs have generated a wealth of high throughput data. Novel, literature-based representations of biological processes and emerging algorithms offer new opportunities for model construction. Here, we review up-to-date efforts to address challenging biological questions by incorporating omic data into logic-based models, and discuss critical difficulties in constructing and analysing integrative, large-scale, logic-based models of biological mechanisms.

This paper shows the proposal of the use of linked data for smart metering systems. The aim of linked data in smart grid applications such as smart metering systems is to give semantic knowledge of the energy transactions between all participators in the power markets. In combination with other technologies like blockchain, the linked data could improve decentralization and security in the world's energetic future.

Microcombs provide a potential compact and efficient light source for multi-Terabit-per-second optical superchannels. However, as the bandwidth of these multi-wavelength light sources is increased, this can result in low per-line power. Optical amplifiers can be used to overcome power limitations, but the accompanying spontaneous optical noise can degrade performance in optical systems. To overcome this issue, we propose wideband noise reduction for comb lines using a high-Q microring resonator, whose resonances align with comb lines. When applying the proposed distillation to a superchannel system with 18 Gbaud, 64-QAM sub-channels in a > 10 Tb/s optical superchannel, we find that noise-corrupted comb lines can reduce the optical signal-to-noise ratio required for the comb by ~ 9 dB when used as optical carriers at the transmitter side, and by ~ 12 dB when used as a local oscillator at the receiver side.

Image fusion is a useful tool for producing a high-resolution multispectral image to be used for land use and land cover mapping. In this study, we use nine pansharpening algorithms namely Color Normalized (CN), Gram-Schmidt (GS), Hyperspherical Color Space (HCS), High Pass Filter (HPF), Nearest-Neighbor Diffusion (NND), Principal Component Analysis (PCA), Resolution Merge (RM), Stationary Wavelet Transform (SWT), and Wavelet Resolution Merge (WRM) to fusion Worldview-3 multispectral Bands and panchromatic band. In spectral and spatial fidelity, several image quality metrics are used to evaluate the performance of pansharpening algorithms. The SWT and PCA algorithms showed better results compared to other pansharpening algorithms while GS and CN algorithms showed the worst results for the original image fusion. The effect of fusion on each band was separately investigated and according to the calculations, we found that the CoastalBlue band and the Blue band showed the best result and the NIR-1 band and NIR-2 band show the worst result for the original image fusion. In the end, we conclude that the choice of fusion method depends on the requirement of remote sensing application.

In personalized healthcare, an ecosystem for the manipulation of reliable and safe private data should be orchestrated. This paper describes a first approach for the generation of fake electrocardiograms (ECGs) based on Generative Adversarial Networks (GANs) with the objective of anonymizing users’ information for privacy issues. This is intended to create valuable data that can be used both, in educational and research areas, while avoiding the risk of a sensitive data leakage. As GANs are mainly exploited on images and video frames, we are proposing general raw data processing after transformation into an image, so it can be managed through a GAN, then decoded back to the original data domain. The feasibility of our transformation and processing hypothesis is primarily demonstrated. Next, from the proposed procedure, main drawbacks for each step in the procedure are addressed for the particular case of ECGs. Hence, a novel research pathway on health data anonymization using GANs is opened and further straightforward developments are expected.

This paper proposes a novel data processing framework dedicated to bedload monitoring in underwater environments. After calibration, by integration the total energy in the nominal bandwidth, the proposed experimental setup is able to accurately measure the mass of individual sediments hitting the aluminum plate. This require a priori knowledge of the vibration trasients in order to match a predefined dictionary. Based on unsupervised hierarchical agglomeration of complex vibration spectra, the proposed algorithms allow to accurately localize the transients corresponding to the shocks created by sediment impacts on a steel plate.

Storing scientific data on the file system in a meaningful and transparent way is no trivial task. In particular when the data have to be accessed after their originator has left the lab the importance of a standardized file structure cannot be underestimated. It is desirable to have a structure that allows for the unique categorization of all kinds of data from experimental results to publications. It has to be accessible to a broad variety of workflows, e.g., via graphical user interface as well as via command line, in order to find widespread acceptance. Furthermore, the inclusion of already existing data has to be as simple as possible. We propose a three-level structure to organize and store scientific data that incorporates the full chain of scientific data management from data acquisition to analysis to publications. Metadata are saved in a standardized way and connect original data to analyses and publication as well as to their originators. A simple software tool to check a file structure for compliance with the proposed structure is presented.

This paper proposes an ARIMA approach to battery health forecasting with accuracy improvement by K shape-based clustered predictors. The health prediction of the battery pack is an important function of a battery management system in data centers. Accurate forecasting of battery life turns out to be very difficult without failure data to train a good forecasting model in real life. The conventional ARIMA model is compared with total and clustered predictors for battery health forecasting. Results show that the forecasting accuracy of the ARIMA model significantly improved by utilizing the results of the clustered predictors for 40 batteries in a real data center. One year of actual historical data of 40 batteries of large scale datacenter is presented to validate the effectiveness of the proposed methodology.

The worldwide interconnected objects, called Internet of Things (IoTs), have been increasingly growing in the last several years. Different social media platforms and devices are continuously generating data about individuals and facilitate the technological and the social convergence of their Internet-based data and services with globalized users. These social and device-related IoTs create rooms for data breaches as such platforms provide ability to collect private and sensitive data. We assert that data breaches are fundamentally failures of access control - most users are too busy or technically ill-equipped to understand access control policy expressions and decisions. We argue that this is symptomatic of globalised societies structured by the conditions of algorithmic modernity; an era in which our data is increasingly interdependent on, and enmeshed with, ever more complex systems and processes that are vulnerable to attack. Ethically managing data breaches is now too complex for current access control systems, such as Role-Based Access Control (RBAC) and Context-Aware Access Control (CAAC). These systems do not provide an explicit mechanism to engage in decision making processes, about who should have access to what data and when, that are involved in data breaches. We argue that a policy ontology will contribute towards the development of Ethical CAAC better suited to attributing accountability for data breaches in the context of algorithmic modernity. We interrogate our proposed Ethical CAAC as a theoretical construct with implications for future policy ontology models and data breach countermeasures. An experimental study on the performance of the proposed framework is carried out with respect to a more generic CAAC framework.

This work describes and interprets the presence of heavy minerals in the western Portuguese continental margin using a set of 78 bottom samples collected from 3 distinct areas of this margin: Porto, Aveiro and Nazaré canyon head areas. The main transparent heavy mineral suite (minerals with frequencies >10%), is composed by amphiboles (hornblende), mica (biotite), andalusite, tourmaline and garnet. A secondary suite (minerals with frequencies between 1 and 10%), is composed by pyroxene (enstatite, diopside and augite), staurolite, zircon and apatite. With very low frequency representing less than 1% we found rutile, olivine, kyanite, monazite, epidote, sphene, anatase, sillimanite and brookite. The main primary sources (igneous and metamorphic rocks) explain the presence of these minerals. However, the application of the principal component analysis, with a previous application of the centered log ratio transformation of the heavy mineral data, also stresses for the importance of the grain sorting as a process in controlling the heavy mineral occurrence. The importance of this process is mostly sustained by the distribution pattern of mica and of the most flattened amphibole grains in a way that these particles tend to have a hydraulic affinity to finer grained sediments.