The narrow parking space will result in difficulties in path planning and spot turning caused by sudden changes and discontinuities in path curvature. To address the problem, this paper investigates the performance of three path planning algorithms and proposes a path optimization algorithm. First, the narrow parking space is defined based on single-step parking of the arc-line combination parking algorithm. Second, to compare the arc-line combination algorithm, Hybrid A* algorithm, and particle swarm optimization parking algorithm under different narrow parking spaces, a multi-objective evaluation function is proposed, including three evaluation indicators, namely, the path length, the number of positive and negative conversions of vehicle speed, and the smoothness of the path. Their performance is compared by simulation conducted in MATLAB, the results show that the Hybrid A* algorithm is the better than others for narrow parking spaces. Third, to smooth the planning path, a path optimization algorithm based on the cubic B-spline curve and gradient descent is proposed. Finally, the simulation is conducted between the proposed algorithm and Hybrid A* algorithm, the result shows that the proposal can effectively eliminate the curvature mutation point and constrain the path curvature to meet the requirements of a smooth path.

The paper presents a new method of path planning for an industrial robot manipulator performing thermal plasma spraying of coatings. Path planning and automatic generation of the manipulator motion program are performed using preliminary 3D surface scanning data from a laser trian-gulation distance sensor installed on the same robot arm. The new path planning algorithm is based on constructing a function of the geodesic distance from the starting curve. A new method for constructing a geodesic distance function on a surface is proposed based on the application of discrete exterior calculus methods characterized by high computational efficiency. The developed algorithms and their software implementation were experimentally tested through robotic mi-croplasma spraying of a protective coating on the surface of a jaw crusher plate, which was then successfully operated for crushing mineral raw materials.

Cervical cancer is 4th the most common cancer in women worldwide. Due to the prevalence of HPV in the population (80-90%), the scientists are likely to discover even more associations of this pathogen with other diseases in the future. In recent years, ISH assays that use automated signal-detecting methods in ormalin-fixed, paraffin-embedded (FFPE) cervical tissue, such as the enzyme-categorized signal-detecting system, have shown a higher sensitivity. To evaluate automatic signal detection of in situ hybridization (ISH) assay for detecting human papillomavirus (HPV) DNA, we compared the ability of an ISH probe, Inform HPV II and III (Ventana Medical Systems, Tucson, AZ), to that of PCR assays to detect HPV DNA in cervical tissue specimens with cervical intraepithelial neoplasia (CIN; CIN 1, 28 cases; CIN 2, 22 cases; and CIN 3, 20 cases) and normal cervix (2 cases). Our findings showed significant relation was confirmed between ISH III level and HPV outcome (positive/negative). Patients with positive HPV outcomes had significantly lower ISH III levels, MD = -7961.82 CI95 [-17230.00; -199.21], p = 0.005. Automatic signal detection of ISH assay is not particularly applicable to cervical tissue material. A more useful method of confirming the presence of HPV in the cervix is ​​the HPV test with genotyping, as it allows for collecting a larger amount of material from the cervical disc and canal. The interpretation of a positive or negative ISH test must be guided in the context of clinical history and morphology.

Automatic Voice Query Service can extremely reduce the artificial cost, which could improve the response efficiency for users. The automatic speech recognition (ASR) is one of the important component in AVQS. However, many dialect areas in China make the AVQS have to response the multi-accented Mandarin users by single acoustic model in ASR. This problem severely limits the accuracy of ASR for multi-accented speech in the AVQS. In this paper, a new framework for AVQS is proposed to improve the accuracy of response. Firstly, the fusion feature including iVector and filterbank acoustic features is used to train the Transformer-CTC model. Secondly, the transformer-CTC model is used to construct the end-to-end ASR. Finally, key words matching algorithm for AVQS based on fuzzy mathematic theory is proposed to further improve the accuracy of response. The results show that the final accuracy in our proposed framework for AVQS arrives at 91.5%. The proposed framework for AVQS can satisfy the service requirement of different areas in mainland of China. This research has a great significance for exploring the application value of artificial intelligence in the real scene.

This study evaluates whether a combination of photodiode sensor measurements, taken during laser powder bed fusion (L-PBF) builds, can be used to predict the resulting build quality via a purely data-based approach. We analyse the relationship between build density and features that are extracted from sensor data collected from three different photodiodes. The study uses a Singular Value Decomposition to extract lower-dimensional features from photodiode measurements, which are then fed into machine learning algorithms. Several unsupervised learning methods are then employed to classify low density (< 99% part density) and high density (≥ 99% part density) specimens. Subsequently, a supervised learning method (Gaussian Process regression) is used to directly predict build density. Using the unsupervised clustering approaches, applied to features extracted from both photodiode sensor data as well as observations relating to the energy transferred to the material, build density was predicted with up to 93.54% accuracy. With regard to the supervised regression approach, a Gaussian Process algorithm was capable of predicting the build density with a RMS error of 3.65%. The study shows, therefore, that there is potential for machine learning algorithms to predict indicators of L-PBF build quality from photodiode build-measurements. Moreover, the work herein describes approaches that are predominantly probabilistic, thus facilitating uncertainty quantification in machine-learnt predictions of L-PBF build quality.

This study introduces an innovative seeding method for cells on large scaffolds (1-100 sqcm) with an accuracy of 0.1mm, comparing the conventional drop-wise seeding technique with an automated seeding approach using an open sourced robotic liquid handling system (OpenLH). This automated system employs an algorithm in which the user inputs the desired droplet volume and seeding pattern dimensions such in number of rows, columns and distance between droplets, thus optimizing the distribution of cells on the scaffold. By adjusting these parameters, the method achieves greater accuracy and consistency over manual seeding and requires less operation space volume than dynamic seeding. Additionally, the system’s tip replacement feature can support the precise seeding of multiple cell types on a single scaffold and the dispensing of growth factors to foster patterns of cell differentiation and proliferation on the large 3D scaffold. This seeding method not only enhances the precision and efficiency of cell distribution on scaffolds but also shows significant potential for scalability in the cultured meat industry, where large scaffolds are essential. The adoption of such automated systems could promote efficient scaffold-based tissue engineering by promoting uniform cell distribution and enabling the creation of complex tissue constructs, thereby advancing both biomedical research and cultured meat production.

In recent years, ontology plays an important role in facilitating the semantic description of images which consists of describing the image by a set of words to describe the scene which signifies the belonging of the image. This description specified in several archaeological fields such as cultural, religious objects and heritage objects of France. However, the description of archaeological images is not yet exploited because this field is very diverse. In this article, we present a panel of ontology construction methods as well as archaeological ontologies. Also, we show our own OntunAr ontology to describe Tunisian archaeological images. In addition, we integrate OnTunAr into the automatic annotation of Tunisian archaeological images.

Chronic venous disease (CVD) occurs in a substantial proportion of the world's population. If the onset of CVD looks like a cosmetic defect, then over time, it can develop into serious problems that require surgical intervention. The aim of the work is to use deep learning (DL) methods for automatic classification of the stage of CVD for self-diagnosis of a patient by using the image of the patient’s legs. The required for DL algorithms images of legs with CVD were obtained by using Internet Data Mining. For images preprocessing, the binary classification problem “legs - no legs” was solved based on Resnet50 with accuracy 0.998. The application of this filter made it possible to collect a data set of 11,118 good quality leg images with various stages of CVD. For classification of various stages of CVD according to CEAP classification, the multi classification problem was set and resolved by using two neural networks with completely different architecture - Resnet50 and DeiT. The model based on DeiT without any tuning shows better results than the model based on Resnet50 (precision = 0.770 (DeiT) and 0.615 (Resnet50)). To demonstrate the results of the work, a telegram bot was developed, in which fully functioning DL algorithms are implemented. This bot allows evaluating the condition of the patient's legs with a fairly good accuracy for the CVD classification.

General–purpose automatic speech recognition (ASR) systems have improved their quality and are being used for pronunciation assessment. However, the assessment of isolated short utterances, as words in minimal pairs for segmental approaches, remains an important challenge, even more for non-native speakers. In this work, we compare the performance of our own tailored ASR system (kASR) with the one of Google ASR (gASR) for the assessment of Spanish minimal pair words produced by 33 native Japanese speakers in a computer-assisted pronunciation training (CAPT) scenario. Participants of a pre/post-test training experiment spanning four weeks were split into three groups: experimental, in-classroom, and placebo. Experimental group used the CAPT tool described in the paper, which we specially designed for autonomous pronunciation training. Statistically significant improvement for experimental and in-classroom groups is revealed, and moderate correlation values between gASR and kASR results were obtained, beside strong correlations between the post-test scores of both ASR systems with the CAPT application scores found at the final stages of application use. These results suggest that both ASR alternatives are valid for assessing minimal pairs in CAPT tools, in the current configuration. Discussion on possible ways to improve our system and possibilities for future research are included.

Dysprosody is a commonly described feature of speech deterioration due to Parkinson’s disease. Descriptions of the tonal movements underlying dysprosody have been attempted but has not afforded automation. The current study assessed a fully automated acoustic analysis pipeline in terms of its ability to predict human raters’ perception of dysprosody in patients with Parkinson’s disease. Read speech samples of 68 speakers with PD (45 male and 23 female) aged 65.0±9.8 years were assessed by four human clinical experts in terms of dysprosody severity. The recordings were also submitted to a speech processing pipeline in which portions with speech were identified and provided with a parametrization of intonation. Five models were trained and tuned based on 75% of utterances and their perceptual evaluations in a 10-fold cross-validation procedure and evaluated in terms of their ability to predict the perceptual assessments of recordings not included in the training. The performances of models were compared to human raters’ agreement with the majority vote on a speech sample. The results showed that human raters’ assessments of dysprosody can be approximated by the automated procedure. Variability in pitch does not adequately describe the level of dysprosody due to Parkinson’s disease.

In this research, 117,718 ionospheric perturbations, with a space size (t) of 20–300 s but no limit on amplitude (A) have been automatically searched globally by a software from ion density data measured by the DEMETER satellite for more than 6 years. The influence of the solar activity on the ionosphere has been firstly examined and the results have presented that the solar activities can globally enhance ionospheric irregularities but rarely induce plasma variations more than 100%. A statistical work has been performed on ion PERs to check their dependence on local time and it is shown that there are 24.8% perturbations appeared in daytime (10:30 LT) and 75.2% ones in nighttime (22:30 LT). Ionospheric fluctuations with an absolute amplitude A < 10% tend to be background variations and the percentages of positive perturbations with small A < 20% are 64% in daytime and 26.8% in nighttime, respectively, but this number is revers for mid-large amplitude PERs. There is a demarcation point in space size t = 120 s and occurrence probabilities of day PERs are always higher than that of nighttime ones before this point while this trend is contrary after this point. Distributions of PER according to various amplitudes or space scales have been characterized by typical seasonal variations either in daytime or in nighttime. The EIA only exists in dayside equinox and winter occupying two lowlatitude crests with lower Np. The huge WSA appears in all periods except for dayside summer full of PERs with enhanced amplitude, especially in winter night. The WN-like structure can be obviously figured out in all seasons showing absolutely space large-scales. In the meanwhile, several magnetic anomalous zones of planetary scale non-dipole fields, such as the SAMA, Northern Africa anomaly, and so on, have been also successfully detected by extreme negative ion perturbations in this time.

This article presents a method that uses a semi-automatic algorithm for the detection and analysis of microcracks in steel test specimens using binarized image analysis. It obtains the length along the crack path in contrast to previous methods that have obtained linear length, thereby achieving a closer approximation to its actual value. Additionally, this method automatically calculates the COD and COA parameters with measurement deviations in micrometres, thus providing greater precision than previous methods proposed to date.

Knowledge of the spatio-temporal occurrence of avalanche activity is critical for avalanche forecasting and hazard mapping. We present a near-real time automatic avalanche monitoring system that outputs detected avalanche polygons within roughly 10 min after Sentinel- 1 SAR data download. Our avalanche detection algorithm has an average probability of detection of 67.2 % with a false alarm rate averaging 45.9, with maximum POD's over 85 % and minimum FAR's of 24.9 % compared to manual detection of avalanches. The high variability in performance stems from the dynamic nature of snow in the Sentinel-1 data. After tuning parameters of the detection algorithm, we processed five years of Sentinel-1 images acquired over a 150 x 100 km large area in Northern Norway, with the best setup. Compared to a dataset of field-observed avalanches, 77.3 % were manually detectable. Using these manual detections as benchmark, the avalanche detection algorithm achieved an accuracy of 79 % with high POD's in cases of medium to large wet snow avalanches. For the first time, we can present a dataset of spatiotemporal avalanche activity over several winters from a large region. This unique dataset allows for research into the relationship between avalanche activity and triggering meteorological factors, mapping of avalanche prone areas and near-real time avalanche activity monitoring to assist public avalanche forecasting. Currently, the Norwegian Avalanche Warning Service is using our processing system for pre-operational use in three regions in Norway.

Multimodality requires integration of heterogeneous transportation data to construct a broad view of the transportation network. Many new transportation services are emerging with being isolated from previously existing networks. This lead them to publish their data sources to the web -- according to Linked Data Principles -- in order to gain visibility. Our interest is to use these data to construct an extended transportation network that links these new services to existing ones. The main problems we tackle in this article fall in the categories of automatic schema matching and data interlinking. We propose an approach that uses web services as mediators to help in automatically detect geospatial properties and map them between two different schemas. On the other hand, we propose a new interlinking approach that enables user to define rich semantic links between datasets in a flexible and customizable way.

Recently, the number of vehicles on the road, especially in urban centers, has increased dramatically due to the increasing trend of individuals towards urbanization. As a result, manual detection and recognition of vehicles (i.e., license plates and vehicle manufacturer) become an arduous task and beyond human capabilities. In this paper, we have developed a system using transfer learning-based DL techniques for automatic identification of Jordanian vehicles. The YOLOv3 (You Only Look Once) model was re-trained using transfer learning to accomplish the license plate detection, character recognition, and vehicle logo detection. While VGG16 (Visual Geometry Group) model was retrained to accomplish the vehicle logo recognition. To train and test these models, four datasets have been collected. The first dataset consists of 7,035 Jordanian vehicle images, the second dataset consist of 7,176 Jordanian license plates, and the third dataset consists of 8,271 Jordanian vehicle images. These datasets have been used to train and test the YOLOv3 model for Jordanian license plate detection, character recognition, and vehicle logo detection, respectively. While the fourth dataset consists of 158,230 vehicle logo images used to train and test the VGG16 model for the vehicle logo recognition. Text measures were used to evaluate the performance of our developed system. Moreover, mean average precision (mAP) measure was used to evaluate the YOLOv3 model of the detection tasks (i.e., license plate detection and vehicle logo detection). For license plate detection, the precision, recall, F-measure, and mAP were 99.6%, 100%, 99.8%, and 99.9%, respectively. While for character recognition, the precision, recall, and F-measure were 100%, 99.9%, and 99.95%, respectively. The performance of license plate recognition stage was evaluated by evaluating these two sub-stages as a sequence, where the precision, recall, and F-measure were 99.8%, 99.8%, and 99.8%, respectively. Furthermore, for vehicle logo detection, the precision, recall, F-measure, and mAP were 99%, 99.6%, 99.3%, and 99.1%, respectively, while for vehicle logo recognition, the precision, recall, F-measure were 98%, 98%, and 98%, respectively. The performance of vehicle logo recognition stage was evaluated by evaluating these two sub-stages as a sequence, where the precision, recall, and F-measure were 95.3%, 99.5%, and 97.4%, respectively.

Abstract—Traditional automatic modulation classificationmethods operate under the closed-set assumption, which provesto be impractical in real-world scenarios due to the diversenature of wireless technologies and the dynamic characteristicsof wireless propagation environments. Open-set environments introduce substantial technical challenges, particularly in terms ofdetection effectiveness and computational complexity. To addressthe limitations of modulation classification and recognition inopen-set scenarios, this paper proposes a semi-supervised openset recognition approach, termed SOAMC (Semi-SupervisedOpen-Set Automatic Modulation Classification). The primaryobjective of SOAMC is to accurately classify unknown modulation types, even when only a limited subset of samples ismanually labeled. The proposed method consists of three keystages: (1) A signal recognition pre-training model is constructedusing data augmentation and adaptive techniques to enhancerobustness. (2) Feature extraction and embedding are performedvia a specialized extraction network. (3) Label propagation isexecuted using a graph convolutional neural network (GCN) toefficiently annotate the unlabeled signal samples. Experimentalresults demonstrate that SOAMC significantly improves classification accuracy, particularly in challenging scenarios with limitedlabeled data and high signal similarity. These findings are criticalfor the practical identification of complex and diverse modulationsignals in real-world wireless communication systems.

Pain diagnosis remains a challenging task due to its subjective nature, the variability in pain expression among individuals, and the difficult assessment of the underlying biopsychosocial factors. In this complex scenario, artificial intelligence (AI) can offer the potential to enhance diagnostic accuracy, predict treatment outcomes, and personalize pain management strategies. This review aims at dissecting the current literature on computer-aided diagnosis methods. It also discusses how AI-driven diagnostic methods can be integrated into multimodal models that combine various data sources, such as facial expression analysis, neuroimaging, and physiological signals, with advanced AI techniques. Despite the significant advancements in AI technology, its widespread adoption in clinical settings faces crucial challenges. Ethical considerations related to patient privacy, biases, and lack of reliability and generalizability are the main issues. Furthermore, there is a need for high-quality real-word validation as well as the development of standardized protocols and policy rules to guide the implementation of these technologies in diverse clinical settings.

Currently there are fewer depth models applied to pepper picking detection, while the existing generalized neural networks have problems such as large model parameters, long training time, and low model accuracy.In order to solve the above problems, this paper proposes a Yolo-chili target detection algorithm for chili pepper detection. First, the classical target detection algorithm yolov5 is used as a benchmark model, and an adaptive spatial feature pyramid structure combining the attention mechanism and the idea of multi-scale prediction is introduced to improve the model's detection effect on occluded peppers and small target peppers. Secondly, a three-channel attention mechanism module is introduced to improve the algorithm's long-distance recognition ability and reduce the interference of redundant testers. Finally, the quantized pruning method is used to reduce the model parameters and realize the lightweight processing of the model. Applying the method to the homemade chili pepper dataset, the AP value of chili pepper reaches 93.11%; the accuracy rate is 93.51% and the recall rate is 92.55%.The experimental results show that yolo-chili is able to achieve accurate and real-time pepper detection under complex orchards.

The objective of this study was to evaluate biomarkers of heat stress (HS) from automatic milking system (AMS), the relationships between measurements of temperature-humidity index (THI) and reticulorumen ph and temperature and some automatic milking systems parameters in dairy cows (rumination time (RT), milk traits, body weight (BW) and consumption of concentrate (CC)) during summer period. The experiment was carried out on a dairy farm at 54.9587408, 23.784146. Lithuanian Black and White dairy cows (n=365) were selected. The cows were milked with Lely Astronaut® A3 milking robots with free traffic. The rations were calculated to meet physiological requirements of the animals. Daily milk yield, rumination time, body weight, milk fat and protein ratio were collected from the Lely T4C management program for analysis. The pH and temperature of the contents of cow reticulorumen were measured using specific smaX-tec boluses manufactured for animal care. The daily humidity and air temperature in the farm zone were obtained from the adjacent weather station (2 km away). According this study during HS, the higher THI had positive correlation with ML, which show tendencies to increase risk of mastitis, and decrease CC, RT, BW, MY, reticulorumen ph and F/P. Some biomarkers of HS can be milk yield, milk lactose, somatic cell count, concentrate conception, rumination time, body weight, reticulorumen ph and milk fat – protein ratio. We can recommend to monitoring these parameters in the herd management program to identify possibility of heat stress.

The article presents the issues related to the operation and modelling of the ship main propulsion steam boiler. Such objects are used widely in seagoing ships especially the very large crude oil carriers as a main propulsion turbine feed. The advantages of such along with simple construction thus great reliability make oil feed boilers an excellent source of power for chosen type of the large ships. It must be pointed out that a lot of research work was done in the previous years regarding automatic control of boiler automation but since then this technology was not in the focus of the researchers. In the future the fossil fuels will become less important than they are now, but the control techniques of boilers would eventually change due to different fuel parameters therefore, development of such is necessary. The article presents the results of research collected in real ship boilers during their operation and then, based on the results, a digital model of such an object was created. This model was implemented into Hardware-In-Loop which is the initial step for preparing the full model (including sensors etc.) of a steam heated boiler. Theoretical background along with chosen simulation and experimental results of control implemented into HIL were presented to validate assumptions...

This paper explores the development of a sophisticated system for automatic test generation tailored specifically for Java web applications utilizing REST interfaces. Writing tests ensures the quality of the software solution event after the introduction of subsequent changes, because automated regression testing can detect potential bugs in the code event before the application is resealed into production. By utilizing and comparing various automatic test generators, the system described provides users with a visual representation of code structure and coverage, enhancing insights through call graph visualization. The paper describes the concepts of theoretical automatic test generators, gives an overview of generators, and details the design and implementation of the implemented solution, which integrates the system test generator and the unit test generator based on open source to achieve the maximum code coverage level.

The pneumatic muscle is an actuator well known for its inherited compliance. In the last years, there have been a lot of applications of these actuators, mainly oriented toward medical devices. However, there are few papers that use muscle as a model associated with mechanical structures. These actuators are difficult to control because their stiffness depends on the applied pressure, determining a non-linear behavior. This article presents a model, created in Matlab, considering the muscle as a kinematic structure. The model is simulated as an individual structure and a PID controller is applied to test the response. Then, these results are validated by experimental tests done in the laboratory on different types of muscles. Comparison results validate the accuracy of the model.

The results of muonographic study of two objects in the cave complex of the unique historical and archaeological memorial, the Holy Dormition Pskovo-Pechersky Monastery, are presented. The experimental technology is based on the use of nuclear emulsion detectors.

This paper documents the development of a special case of multilingual Automatic Speech Recognition model, specifically tailored to attend two languages spoken by the majority of Latin America, Portuguese and Spanish. The bilingual model combines Language Identification and Speech Recognition developed with the Wav2Vec2.0 architecture and trained on several open and private speech datasets. In this model, the feature encoder is trained jointly for all tasks and different context encoders are trained for each task. The model is evaluated separately on two tasks: language identification and speech recognition. The results indicate that this model achieves good performance on speech recognition and average performance on language identification, training on a low quantity of speech material. The average accuracy of the language identification module on the MLS dataset is 66.75%. The average Word Error Rate in the same scenario is 13.89%, which is better than average 22.58% achieved by the commercial speech recognizer developed by Google.

Automation of vegetable seedling transplanting has provided opportunities for saving labors and improving productivity. Some changes in seedling agronomy are necessary for efficient transplanting. In this study, the local nursery substrates were added with the herbaceous peat, the sphagnum peat and the coir peat, respectively. Effects of the new compound substrates were investigated on the seedling qualities and the root-substrate strength. In the results, we found that the addition of these horticultural mediums significantly affected the physiochemical properties of the original substrates. Under the same nursery conditions, some appropriate additions could promote the seedling growth. And the deficient or excessive additions were to inhibit the growing development of seedlings and their roots. The corresponding additions would also improve the structural characteristics of the root lumps. Generally, the nursery substrates added with the sphagnum peat were relatively optimized in contribution to the seedling qualities and the root-substrate strength. Especially as the commercial substrate and the sphagnum peat were mixed at the volume ratio of 2:1, the dry matter accumulation of seedlings was 2.18 times more than the original. Their root lumps had the best consolidation strength, which may be an effective application for the necessary qualities of seedlings for automatic transplanting.

As use of composite materials increases, the search for suitable automated processes gains relevance to guarantee production quality by ensuring uniformity of the process, minimizing the amount of generated scrap and reducing time and energy consumption. Limitations on production by traditional means such as hand lay-up, vacuum bagging and in-autoclave methods, tend not to be as efficient when the size and shape complexity of the part being produced increases, motivating the search for alternative processes such as the Automated Tape Laying (ATL). This work aims to describe the process of modelling and simulating a composite ATL with in situ consolidation by characterizing the machine elements, using the finite differences method in conjunction with energy balances, in order to create a digital twin of the process for further control design. The modelling approach implemented is able to follow the process dynamics when changes to the heating element are imposed as well as to predict the composite material temperature response, making it suitable to work as a digital twin of a production process using an ATL machine.

In this study pH, temperature of the contents of the forestomach of cows and cow activity were measured using specific smaXtec boluses manufactured for animal care. Rumination time, body weight, milk yield, milk fat/protein ratio, milk lactose, milk somatic cell count, milk electrical conductivity and conception of concentrates were registered with the help of Lely Astronaut® A3 milking robots. The following parameters were obtained: base excess in blood, partial carbon dioxide pressure, partial oxygen pressure, bicarbonate, hydrogen potential, total carbon dioxide carbon, base excess in extracellular fluid, sodium, calcium, potassium, packed cell volume, chlorides, hemoglobin concentration and lactate. According to the concentration of lactose in milk, cows were grouped into two groups: group 1 - milk lactose &lt;4.70% (n = 20), group 2 - milk lactose ≥ 4.70% (n = 15). Data of cows were also divided by milk fat and protein ratio: F/P&lt;1.2 (class 1), F/P=1.2 (class 2) and F/P&gt;1.2 (class 3). According our results we can conclude that inline registered milk lactose concentration can be used as indicator for the health status of fresh dairy cows. Cows with higher lactose concentration (≥ 4.70%) developed more activity (54.47%) and had less risk of mastitis (lover milk EC, and SCC) and metabolic disorders according to F/P. Cows with higher lactose concentration showed higher glucose concentrations. Low level of lactose can be used as indicator of mastitis (milk SCC ≥ 100 thousand/ml) and metabolic disorders according to F/P.

Auto checkout has received more and more attention in recent years and this system automatically generates a shopping bill by identifying the picture of the products purchased by the customers. However, the system is challenged by the domain adaptation problem, where each image of the training set contains only one commodity, whereas the test set is a collection of multiple commodities. The existing solution to this problem is to resynthesize the training images to enhance the training set. Then the composite images are rendered using CycleGAN to make the image distribution of the training set and the test set more similar. However, we find that the detection boxes given by the ground truth of the common dataset contain a large part of the background area, the area will affect the training process as noise. To solve this problem, we propose a mask data priming method. Specifically, we redo the large scale Retail Product Checkout (RPC) dataset and add segmentation annotation information to each item in the training set image based on the original dataset using pixel-level annotation. Secondly, a new network structure is proposed in which we train the network using joint learning of detectors and counters, and fine-tune the detection network by filtering out suitable images from the test set. Experiments on the RPC dataset have shown that our method yields better results. we used an approach that reached 81.87% compared to 56.68% for the baseline approach which demonstrates that pixel-level information helps to improve the detection results of the network.

Purpose: Carotid intraplaque hemorrhage (IPH) increases risk of territorial cerebral ischemic events, but different sequences or criteria have been used to diagnose or quantify carotid IPH. The purpose of this study was to compare manual segmentation and semi-automatic segmentation for quantification of carotid IPH on magnetization-prepared rapid acquisition with gradient-echo (MPRAGE) sequences. Methods: Forty patients with 16–79% carotid stenosis and IPH on MPRAGE sequences were reviewed by two trained radiologists with more than five years of specialized experience in carotid plaque characterization with carotid plaque MRI. Initially, the radiologists manually viewed the IPH based on the MPRAGE sequence. IPH volume was then measured by three different semi-automatic methods, with high signal intensity 150%, 175%, and 200%, respectively, above that of adjacent muscle on the MPRAGE sequence. Agreement on measurements between manual segmentation and semi-automatic segmentation was assessed using the intraclass correlation coefficient (ICC). Results: There was near-perfect agreement between manual segmentation and the 150% and 175% criteria for semi-automatic segmentation in quantification of IPH volume. The ICC of each semi-automatic segmentation were as follows: 150% criteria: 0.861, 175% criteria: 0.809, 200% criteria: 0.491. The ICC value of manual vs. 150% criteria and manual vs. 175% criteria were significantly better than the manual vs. 200% criteria (p < 0.001). Conclusions: The ICC of 150% and 175% criteria for semi-automatic segmentation are more reliable for quantification of IPH volume. Semi-automatic classification tools may be beneficial in large-scale multicenter studies by reducing image analysis time and avoiding bias between human reviewers.

Ship speeds extracted from AIS data vary with ice conditions. We extrapolated this variation with SAR data to a chart of expected icegoing speed. The study is for the Gulf of Bothnia in March 2013 and for ships with ice class 1A Super that are able to navigate without icbreaker assistance. The speed was normalized to 0-10 for each ship. As the matching between AIS and SAR was complicated by ice drift during the time gap, from hours to two days, we calculated a set of local SAR statistics over several scales. We used random tree regression to estimate the speed. The accuracy was quantified by mean squared error (MSE), and the fraction of estimates close to the actual speeds. These depended strongly on the route and the day. MSE varied from 0.4 to 2.7 units² for daily routes. 65 % of the estimates deviated less than one unit and 82 % less than 1.5 units from the AIS speeds. The estimated daily mean speeds were close to the observations. Largest speed decreases were provided by the estimator in a dampened form or not at all. This improved when ice chart thickness was included as one predictor.

Automatic Milking Systems (AMS) are revolutionizing the dairy industry by boosting herd effi-ciency, primarily through increased milk yield per cow and reduced labor costs. The performance of milking machines, whether traditional or automated, can be evaluated using advanced vacuum meters through dynamic testing. This process involves scrutinizing the system and milking rou-tine to identify critical points, utilizing the VaDia™ logger (BioControl AS, Rakkestad, NO). Vacuum recordings were downloaded and analyzed using the VaDia Suite™ software under the guidance of a milking specialist. Access to data from AMS across various manufacturers and herds facilitated a retrospective study aimed at describing and comparing key milk emission parameters for different AMS brands while identifying potential mastitis risk factors. Using proper statistical procedures of SPSS 29.1 (IBM Corp, USA), researchers analyzed data from 4,878 individual quarter milkings from cows in 48 dairy herds. Results indicated significant variability in milking pa-rameters associated to quarter milk yield and AMS brand. Notably, despite AMS standardizing teat preparation and stimulation, the study revealed a surprisingly high frequency of two major mastitis risk factors—bimodality and irregular vacuum fluctuations—occurring more frequently than in conventional milking systems. This study, one of the few comparing different AMS brands and their performance, highlights the crucial role of dynamic testing in evaluating AMS perfor-mance under real-world conditions.

(1) Background: Heat stress detrimentally restricted the economic in dairy farming production, therefore, this study was designed to investigate how automatic spraying method on alleviating heat stress on cows. (2) Methods: A total of 1208 multiparous dairy cows were randomly allocated into 6 barns, three barns were equipped with automatic sprinklers (SP), each barn was considered as a replicate. The other three barns were considered as control treatments (CON). Each barn was considered as a replicate. (3) Results: body temperature and milk somatic cell count were significantly decreased, while DMI, milk yield, and milk fat content significantly increased with spraying treatment. ICR was improved from 30% to 35%. Rumen fermentation was enhanced by the increased levels of total VFA, acetate, propionate, and butyrate with the spraying treatment. Rumen microbiota results showed at the phylum level, rumen Fibrobacters abundance significantly increased by the spraying treatment. At the genus level, Eubacterium, Shuttleworthia, Saccharofermentans, Lachnospira, Pseudobutyrivibrio, Selenomonas, and Succinivibrio abundance were significantly increased, while Ruminococcaceae and Rikenellaceae abundance were significantly decreased in the rumen with spraying treatment. (4) Conclusion: this study demonstrated automatic spraying modulated the rumen microbiota composition and fermentation function, and effectively meliorated side-effects of heat stress on dairy cows.

Gelephu, located in the Himalayan region, has experienced one of the strongest development activities due to the suitable topography and geographic location, which has led to rapid urbanization. The main objective of the study is to perform land use land cover (LULC) mapping for Gelephu for 2016 and 2023 by a Random Forest (RF) classifier, using the Semi-automatic Classification Plugin (SCP) in QGIS and identify LULC changes. Furthermore, the study assessed the vegetation change dynamics within the study area by analysing the Normalized Difference Vegetation Index (NDVI) for 2016 and 2023. Additionally, the study characterized the resulting LULC change for Gelephu Thromde, a sub-administrative municipal entity, as a result of the notable intensity of the infrastructure development activities. The current study used a framework to collect Sentiniel-2 satellite data, which was then used for pre- and post-processing to create LULC and NDVI maps. The classification model achieved high accuracy, with an area under the curve (AUC) of up to 0.89. The corresponding LULC and NDVI statistics were analysed to determine the current status of the LULC and vegetation indices, respectively. The LULC change analysis reveals urban growth of 5.65% and 15.05% for Gelephu and Gelephu Thromde, respectively. The NDVI assessment shows significant deterioration in vegetation health with a 75.11% loss of healthy vegetation in Gelephu between 2016 and 2023. This research provides the first version of LULC and NDVI maps of Gelephu. The analysis results indicate possible future implications on sustainable development management in Gelephu Bhutan.

A key component for the proper functioning, availability, and reliability of power grids is the power trans- former. Although these are very reliable assets, the early detection of incipient degradation mechanisms are very important to prevent failures that may shorten their lifetime. In this work a review and comparative analysis, of classical Machine Learning algorithms (such as single and ensemble classification algorithms) and two automatic machine learning classifiers, are presented for the fault diagnosis of power transformers. The goal is to determine whether fully automated ML approaches are worse or better than traditional ML frameworks that require a human in the loop (such as a data scientist) to identify transformer faults from oil-dissolved gases data. The methodology uses a DB compiled from published and proprietary transformer fault samples. Faults data is obtained from the literature, the Duval pentagon method, and user-expert knowledge. The parameters from, either single or ensemble classifiers, were optimized through standard machine learning procedures. The results showed that the best performing algorithm is a robust automatic machine learning classifiers model followed by classical algorithms such as neural networks and stacking ensembles. These results highlight the ability of a robust automatic machine learning model for, handling imbalanced power transformers faults datasets with high accuracy, using the minimum tuning effort by the electrical experts. By providing the most probable transformer fault condition will reduce the time required to find and solve the fault.

The overpopulation of feral pigeons in Hong Kong has significantly disrupted the urban ecosystem, highlighting the urgent need for effective strategies to control their population. In general, control measures should be implemented and re-evaluated periodically following accurate estimations of feral pigeon population in the concerned regions, which, however, is very difficult in urban envi-ronments due to the concealment and mobility of pigeons within complex building structures. With the advances in deep learning, computer vision can be a promising tool for pigeon monitoring and population estimation but has not been well investigated so far. Therefore, we propose an improved deep learning model based on Mask-RCNN (Swin-Mask R-CNN) for feral pigeon detection using computer vision techniques. Specifically, our model consists of a Swin transformer network (STN) as the backbone, a feature pyramid network (FPN) as the neck, and three decoupled detection heads. The STN is utilized to extract deep feature information of feral pigeons through local and cross-window attention mechanisms. The FPN is employed to fuse multi-scale features and enhance the multi-scale learning ability. Heads in the three branches are responsible for classification, pre-dicting best bounding boxes, and segmentation of feral pigeons, respectively. During the prediction phase, a Slicing Aided Hyper Inference (SAHI) tool is employed to zoom in on the feature infor-mation of small feral pigeon targets, and the segmentation head is frozen to expedite inference of large images. Experiments were conducted on feral pigeon dataset to evaluate model performance. The results reveal that our model is well-suited for detecting small targets in high-resolution images and achieves excellent recognition performance for feral pigeons with a mAP (mean average pre-cision) and an AP50 (average precision at 50% intersection over union) of 0.74 and 0.93, respectively. For small target feral pigeons, AP50 in small scale (AP50s) improved by 10% as compared to the Mask R-CNN (AP50s of 0.75), demonstrating its potential for dynamic pigeon detection and population estimation in the future.

OpenToolFlux is an open-source software to estimate soil gas fluxes from gas concentration time-series data generated by automatic chamber systems. This paper describes the physical equipment used as well as software design and workflow. The software is a command-line application that imports tabular time-series data from the analyzer following the instructions specified in a configuration file by the user, performs configurable data-cleaning operations, and outputs a data file with volumetric flux estimates as well as diagnostic plots. The software can be configured according to the specifics of physical equipment and experimental setup and is therefore applicable in a wide range of studies.

Two clear-air over-the-horizon propagation mechanisms affecting Automatic Identification System (AIS) detection range are considered. Comparison results are presented between the path loss due to tropospheric ducting and path loss due to tropospheric scattering (troposcatter) for the AIS frequencies. The calculations are based on the well-known parabolic equation approximation to the wave equation, in which a simple troposcatter formula is incorporated. In most studied cases the ducting assures significantly greater reduction of path loss than troposcatter even when the AIS frequencies are not well trapped in the duct. Emphasis is placed on elevated trapping layers and some features that may make ducting propagation less favorable in terms of increasing the AIS detection range are discussed.

We present improvements in n-best rescoring of code-switched speech achieved by n-gram augmentation as well as optimised pretraining of long short-term memory (LSTM) language models with larger corpora of out-of-domain monolingual text. In addition, we consider the application of large pretrained transformer-based architectures. Our experimental evaluation is performed on an under-resourced corpus of code-switched speech comprising four bilingual code-switched sub-corpora, each containing a Bantu language (isiZulu, isiXhosa, Sesotho, or Setswana) and English. We find in our experiments that, by combining n-gram augmentation with the optimised pretraining strategy, speech recognition errors are reduced for each individual bilingual pair by 3.51% absolute on average over the four corpora. Importantly, we find that even speech recognition at language boundaries improves by 1.14% even though the additional data is monolingual. Utilising the augmented n-grams for lattice generation, we then contrast these improvements with those achieved after fine-tuning pretrained transformer-based models such as distilled GPT-2 and M-BERT. We find that, even though these language models have not been trained on any of our target languages, they can improve speech recognition performance even in zero-shot settings. After fine-tuning on in-domain data, these large architectures offer further improvements, achieving a 4.45% absolute decrease in overall speech recognition errors and a 3.52% improvement over language boundaries. Finally, a combination of the optimised LSTM and fine-tuned BERT models achieves a further gain of 0.47% absolute on average for three of the four language pairs compared to M-BERT. We conclude that the careful optimisation of the pretraining strategy used for neural network language models can offer worthwhile improvements in speech recognition accuracy even at language switches, and that much larger state-of-the-art architectures such as GPT-2 and M-BERT promise even further gains.

Background: The human mind is multimodal. Yet most behavioral studies rely on century-old measures such as task accuracy and latency. To create a better understanding of human behavior and brain functionality, we should introduce other measures and analyze behavior from various aspects. However, it is technically complex and costly to design and implement the experiments that record multiple measures. To address this issue, a platform that allows synchronizing multiple measures from human behavior is needed. Method: This paper introduces an opensource platform named OpenSync, which can be used to synchronize multiple measures in neuroscience experiments. This platform helps to automatically integrate, synchronize and record physiological measures (e.g., electroencephalogram (EEG), galvanic skin response (GSR), eye-tracking, body motion, etc.), user input response (e.g., from mouse, keyboard, joystick, etc.), and task-related information (stimulus markers). In this paper, we explain the structure and details of OpenSync, provide two case studies in PsychoPy and Unity. Comparison with existing tools: Unlike proprietary systems (e.g., iMotions), OpenSync is free and it can be used inside any opensource experiment design software (e.g., PsychoPy, OpenSesame, Unity, etc., https://pypi.org/project/OpenSync/ and https://github.com/moeinrazavi/OpenSync_Unity). Results: Our experimental results show that the OpenSync platform is able to synchronize multiple measures with microsecond resolution.

Taking into account the increase in the emission of greenhouse gases produced by ships, during navigation and maneuvering in the port, a direct consequence of the increase in maritime traffic, the international community has developed a broad set of regulations to limit such emissions. The installation in commercial ports of automatic mooring systems by means of vacuum suction cups (AMS), thus reducing considerably the time required to carry out the mooring and unmooring maneuvers of ships, is a factor that is considerably influencing the decrease in Emissions of polluting gases in commercial ports with high traffic. The objective of the present work is to verify the influence of the use of the AMS on the emissions of polluting gases produced in the facilities destined to the traffic of container ships. It examines the CO2 emissions of container ships that call in the only three container ports equipped with AMS: Salalah (Oman), Beirut (Lebanon) and Ngqura (South Africa). Between them, these three ports supported the transit of 6 million TEUS in 2017. The calculation of emissions is made taking into account the time saved when performing the mooring maneuvers using the new AMS system compared with when it is not used. To do this, two different calculation methods are used: EPA and ENTEC to then compare the results of the two and thus obtain the reduction in emissions per TEU in these terminals during the mooring maneuvers. The paper concludes with a discussion on the values of the reductions in emissions obtained and the advantages of the installation of AMS in commercial ports located near population centres.

The aim of the instant study was to evaluate relative inline progesterone dynamic changes according to parity and status of reproduction and to estimate the relationship with productivity in dairy cows by inline milk analysis system (IMAS) Herd Navigator. According to a progesterone assay, cows were divided into three periods: postpartum, after insemination, and pregnancy. In the first stage of the postpartum period (0-29 days), the progesterone level in milk was monitored every 6 days. The second stage of the postpartum period (30-65 days) lasted until cows were inseminated. In the third period (0-45 days) after cows were inseminated, progesterone scores were distributed according to whether or not cows became pregnant. The stability of progesterone dynamics was monitored in the last study period (45-90 days). For milk progesterone detection, the fully automated real-time progesterone analyzer Herd Navigator (Lattec I/S. Hillerød. Denmark) was used in combination with a DeLaval milking robot (DeLaval Inc., Tumba, Sweden). The highest progesterone concentration in multiparous cows ranged from 1.08% (11-17 days postpartum) to 34.89% higher than that in cows of the first parity. The lowest progesterone concentrations in the milk of all cows were estimated during the first 5 postpartum days and between 18 and 23 days after calving. Peak milk progesterone concentrations were evaluated in the first stage of the experiment on days 24-29 after calving. In the 30-65-day period after calving, the level of milk progesterone was 2.02-2.08 times higher than that in the 24-29-day postpartum period. After insemination, the level of progesterone in milk increased by 10.77-22.54% compared with the level from cows on days 30-65 after calving. A higher (12.88%) concentration of progesterone in milk was evaluated in multiparous cows compared with that from cows of the first parity. In pregnant cows, milk progesterone within 0-45 days after insemination was 23.88% (in multiparous cows) and 32.54% (in primiparous cows) higher than that in non-pregnant cows. On days 31–35 after insemination, pregnant cows had higher milk progesterone levels, which can predict pregnancy success. According to our study results, we can suggest that an inline progesterone concentration determined by inline milk analysis system Herd Navigator and changes in its dynamics correlate with different reproductive statuses and milk yield of cows. Pregnant cows 11–15 days after insemination have higher milk progesterone levels, what positively, associated with a successful pregnancy.

Space-borne Synthetic Aperture Radar (SAR) Interferometry (InSAR) is now a key geophysical tool for surface deformation studies. The European Commission’s Sentinel-1 Constellation began acquiring data systematically in late 2014. The data, which are free and open access, have global coverage at moderate resolution with a 6 or 12-day revisit, enabling researchers to investigate large-scale surface deformation systematically through time. However, full exploitation of the potential of Sentinel-1 requires specific processing approaches as well as the efficient use of modern computing and data storage facilities. Here we present LiCSAR, an operational system built for large-scale interferometric processing of Sentinel-1 data. LiCSAR is designed to automatically produce geocoded wrapped and unwrapped interferograms and coherence estimates, for large regions, at 0.001° resolution (WGS-84 system). The products are continuously updated in a frequency depending on prioritised regions (monthly, weekly or live update strategy). The products are open and freely accessible and downloadable through an online portal. We describe the algorithms, processing, and storage solutions implemented in LiCSAR, and show several case studies that use LiCSAR products to measure tectonic and volcanic deformation. We aim to accelerate the uptake of InSAR data by researchers as well as non-expert users by mass producing interferograms and derived products.

Automatic speech recognition of native languages plays a crucial role in fostering inclusivity and preserving linguistic diversity. The Kashmiri language, an underrepresented Indo-Aryan dialect primarily spoken in the Kashmir Valley, poses substantial challenges for existing AI models due to its phonetic diversity and scant linguistic resources. This study addresses these hurdles by developing a robust spoken Kashmiri recognition system that employs dual feature extraction with spectrogram augmentation and a hybrid Convolutional Neural Network (CNN) and Gated Multi-Layer Perceptron (gMLP) model. Key to this endeavour is the creation of a high-fidelity dataset that captures the phonetic variations across Kashmiri dialects, focusing on twelve specific words. Through the integration of dual feature extraction, spectrogram augmentation, and the innovative hybrid modelling approach, our system attains an impressive 96% accuracy on the test dataset for classifying these twelve spoken words. This research not only enhances the generalization and resilience of spoken Kashmiri recognition systems but also represents a critical step towards advancing technology and safeguarding the Kashmiri language within this underrepresented linguistic domain.

This paper presents a new optimization algorithm to control the voltage of power system generators by the simultaneous tuning of the parameters of Automatic Voltage Regulator (AVR) and Power System Stabilizer (PSS) using a new technique called Particle Swarm Optimization with Periodic Oscillating Exponential Decay (PSO - POED). The proposed algorithm was applied to both the Single-Machine Infinite-Bus (SMIB) Power System and the 9-Bus Multi-Machine Power System. The results of the simulation show that the proposed method is efficient and guarantees an improvement in the dynamic stability and convergence rate of the simulations.

Growth monitoring of crops is a crucial aspect of precision agriculture, essential for optimal yield prediction and resource allocation. Traditional crop growth monitoring methods are labor-intensive and prone to errors. This study introduces an automated segmentation pipeline utilizing multi-date aerial images and ortho-mosaics to monitor the growth of cauliflower crops (Brassica Oleracea var. Botrytis) using an object-based image analysis approach. The methodology employs YOLOv8, Grounding Detection Transformer with Improved Denoising Anchor Boxes (DINO), and the Segment Anything Model (SAM) for automatic annotation and segmentation. The YOLOv8 model was trained using aerial image datasets, which then facilitated the training of the Grounded Segment Anything Model framework. This approach generated automatic annotations and segmentation masks, classifying crop rows for temporal monitoring and growth estimation. The study’s findings utilized a multi-modal monitoring approach to highlight the efficiency of this automated system in providing accurate crop growth analysis, promoting informed decision-making in crop management and sustainable agricultural practices. Results indicate consistent and comparable growth patterns between aerial images and ortho-mosaics, with significant periods of rapid expansion and minor fluctuations over time. The results also indicated a correlation between the both the time and method of observation which paves a future possibility of integration of such techniques aimed at increasing the accuracy in crop growth monitoring based on automatically derived temporal crop row segmentation masks.

Multibeam echo-sounders provide ideal data for semi-automated seabed feature extraction and accurate morphometric measurements. However, these methods have not been tested in morphologically highly complex environments. In this study, bathymetric and raw backscatter data were initially used to manually map the complex reef morphology found in the semi-enclosed Gera Gulf, in the northern Aegean Sea (Greece). A large number of reefs (more than 7000) were detected, making manual mapping extremely time-consuming. Benthic Terrain Modeller (BTM) was selected as a semi-automated method to map the reefs. The BTM did not function properly in this irregular relief and the results were discouraging. Trying to improve the BTM functionality, both bathymetry and slope were modified (enhanced); this time, the BTM outcome was unexpectedly improved, producing accurate results that appeared to exceed the accuracy of manual mapping. To compare the final maps with the distribution of the reefs, mapcurves were created to estimate the Goodness-of-Fit (GOF), while Precision, Recall, and F1 Score were also calculated. GOF values suggest more than 50% overlap between the resulting polygons while, Precision, Recall and F1 score resulted in values higher than 0.78 suggesting good detection accuracy for the semi-automated method. It becomes apparent that BTM provided more efficient results in comparison to the time-consuming manual mapping. This study asserts that semi-automated mapping stands as an effective method for delineating the geomorphometry of intricate relief and serves as a powerful tool for habitat mapping and decision-making.

Recently, deep learning models have been widely applied to modulation recognition, which have become a hot topic due to their excellent end-to-end learning capabilities. However, current methods are mostly based on uni-modal inputs, which suffer from incomplete information and local optimization. To complement the advantages of different modalities, we focus on the multi-modal fusion method. Therefore, we introduce an iterative dual-scale attentional fusion (iDAF) method to integrate multimodal data. Firstly, two feature maps with different receptive field sizes are constructed using local and global embedding layers. Secondly, the feature inputs are iterated into the Iterative Dual Scale Attention Module (iDCAM), where the two branches capture the details of high-level features and the global weights of each modal channel, respectively. The iDAF not only extracts the recognition characteristics of each specific domains, but also complements the strengths of different modalities to obtain a fruitful view. Our iDAF achieves a recognition accuracy of 93.5\% at 10dB and 0.6232 at full SNR. The comparative experiments and ablation studies effectively demonstrate the effectiveness and superiority of the iDAF.

Leukemia is a cancer of the bone marrow, a spongy tissue that secretes into the bones and serves as the site for the production of blood cells. One of the most prevalent kinds of leukemia in adults is acute myeloid leukemia (AML). Leukemia has non-specific signs and symptoms that are also similar to those of other interpersonal illnesses. The only way to accurately diagnose leukemia is by manually examining a stained blood smear or bone marrow aspirate under the microscope. However, this approach takes more time and is less precise. This paper describes a method for the automatic recognition and classification of AML in blood smears. Classification techniques include decision trees, logistic regression, support vector machines, and naive bayes.

The third trimester of pregnancy is the most critical period for human brain development, during which significant changes occur in the morphology of the brain. The development of sulci and gyri allows considerable increase of the brain surface. In premature childrens, these alterations take place outside the womb that may cause a disruption of the normal brain maturation process. We hypothesize that a normalized atlas of brain maturation with cerebral ultrasound images from birth to term equivalent age will help clinicians assess these changes. This work proposes a semi-automatic GUI platform for segmenting the main cerebral sulci in the clinical setting from ultrasound images. This platform has been obtained from images of a cerebral ultrasound neonatal database images provided by two clinical researchers from the Hospital Sant Joan de Déu in Barcelona, Spain. The primary objective is to provide a user-friendly design platform for clinicians, for running and visualizing an atlas of images validated by medical experts. This GUI offers different segmentation approaches, pre-processing tools, and is friendly designed for running, visualizing images, and segmenting the principal sulci. The presented results are discussed in detail in this paper, providing an exhaustive analysis of the proposed approach’s effectiveness.

Nowadays, an analysis of virtual media to predict society’s reaction to any events or processes is a task of great relevance. Especially it concerns meaningful information on healthcare problems. Internet sources contain a large amount of pharmacologically meaningful information useful for pharmacovigilance purposes and repurposing drug use. An analysis of such a scale of information demands developing the methods that require the creation of a corpus with labeled relations among entities. Before, there have been no such Russian language datasets. This paper considers the first Russian language dataset where labeled entity pairs are divided into multiple contexts within a single text (by used drugs, by different users, by the cases of use, etc.), and a method based on the XLM-RoBERTa language model, previously trained on medical texts to evaluate the state-of-the-art accuracy for the task of indication of the four types of relationships among entities: ADR–Drugname, Drugname–Diseasename, Drugname–SourceInfoDrug, Diseasename–Indication. As shown based on the presented dataset from the Russian Drug Review Corpus, the developed method achieves the F1-score of 81.2% (obtained using cross-validation and averaged for the four types of relationships), which is 7.8% higher than the basic classifiers.

Considering the significant advancements in autonomous vehicle technology, research in this field is of interest to researchers. To automatic parking, controlling steer angle, gas hatch, and brakes need to be learned. Due to the increase in the number of cars and road traffic, car parking space has decreased. Its main reason is information error. Because the driver does not receive the necessary information or receives it too late, he cannot take appropriate action against it. This paper uses two phases: the first phase, for goal coordination, was used genetic algorithms and the Cuckoo search algorithm was used to increase driver information from the surroundings. Using the Cuckoo search algorithm and considering the limitations, it increases the driver’s level of information from the environment. Also, by exchanging information through the application, it enables the information to reach the driver much more quickly and the driver reacts appropriately at the right time. The suggested protocol is called the MODM-based solution. Here, the technique is assessed through extensive simulations performed in the NS-3 environment. Based on the simulation outcomes, it is indicated that the parking system performance metrics are enhanced based on the detection rate, false-negative rate, and false-positive rate.

High electricity demand for consumption at current supply level in Indonesia led to the rising cost of electricity bills. This factor is compounded by the fact that many electric generators in Indonesia still use fossil fuels, which contributes to the high basic generation cost. UBL is one of the universities that aim to be a green campus. Our research explores the possibility of installing motion sensor to contribute on the energy efficiency. Although mostly common in developed countries, the use of motion sensor for energy efficiency is still rare, especially in Indonesia. despite rising cost and supply shortages, Indonesian buildings are still of high energy consumption. our experiment shows that simple installation of commercially available motion sensors can contribute to reduce the electricity bill from the increase of energy efficiency. One of the efforts to lower energy demand in consumer side is to use the electricity efficiently, such as turning off lights in a room when it's not in use. This method can be simply done by turning the light switches for office and classrooms, but difficult to do in public spaces such as toilets and corridors. Our experiment shows that simple installation of commercially available motion sensors can contribute to reduce the electricity bill from the increase of energy efficiency. Automatic light switches experimentally installed in sample toilet room prove that electricity consumption from the lamps can contribute to the reduction of total weekly energy that translates into Green House Gas emission reduction.

Human visual system (HVM) can quickly localize the most salient object in scenes, which has been widely applied on natural image segmentation [15]-[19]. In ultrasound (US) breast images, compared with background areas, tumor is more salient because of its higher contrast. In this paper, we develop a novel automatic localization method based on HVM for automatic segmentation of ultrasound (US) breast tumors. First, the input image is smoothed by convolution with a linearly separable Gaussian filter and then subsampled into a 9-layer Gaussian pyramid. Then intensity, blackness ratio, and superpixel contrast features are combined to compute saliency map, in which Winner Take All algorithm is used to localize the most salient region, presenting with a circle on the localized target. Finally the circle is taken as the initial contour of CV level set to finish the extraction of breast tumor. The localization method has been tested on 400 US beast images, among which 378 images have higher saliency than background areas and succeed in localization, with high accuracy 92.00%. The HVM localization method can be used to localize the tumors, combined with this method, CV level set can achieve the fully automatic segmentation of US breast tumors. By combing intensity, blackness ratio and superpixel contrast features, the proposed localization method can successfully avoid the interference caused by background areas with low echo and high intensity. Moreover, multi-object localization of US breast images can be considered in future employment.

Homogenization of climatic time series aims to remove non-climatic biases which come from the technical changes of climate observations. The method comparison tests of the Spanish MULTITEST project (2015-2017) showed that ACMANT was likely the most accurate homogenization method available at that time, in spite of the tested ACMANTv4 version gave suboptimal results when the test data included synchronous breaks for several time series. The technique of combined time series comparison has been introduced to ACMANTv5 in order to treat better this specific problem. Tests confirm that ACMANTv5 treats adequately synchronous inhomogeneities, but the accuracy has slightly worsened in some other cases. Results for a known daily temperature test dataset for 4 U.S. regions show that the residual errors after homogenization may be larger with ACMANTv5 than with ACMANTv4. Further tests have been performed to learn more about the efficiencies of ACMANTv4 and ACMANTv5, and to find solutions for the appearing problems with the new version. Planned changes in ACMANTv5 are presented in the paper along with connecting test results. The overall results indicate that the combined time series comparison can be kept in ACMANT, but smaller networks should be generated by the automatic networking process of the method. For the further improvements of homogenization methods and for obtaining more reliable and more solid knowledge about their accuracies, more synthetic test datasets mimicking fairly the true spatio-temporal structures of real climatic data would be in need.

The paper deals with the reverse engineering, namely the as built documentation of the actual construction. The input is data measured in field using geodetic methods. In addition to modern methods of surveying 3D objects, such as laser scanning, it is still necessary to use classic surveying using a total station. The bottle neck of the process is the creation of documentation of the construction, which is still created manually in the appropriate CAD/BIM software. The goal of the research was to find a method that would reduce the amount of manual work when drawing documentation in CAD/BIM to a minimum. The core of the solution is the use of a topology that interconnects the points measured in field. The entire procedure has 2 parts: 1. Creating a topo-logical drawing template in a suitable CAD/GIS software (digital sketch), 2. Adding geometry to this sketch and creating a drawing using topological codes. The method was verified in practice by applying it to several specific buildings in the Czech Republic. The practical application of the method demonstrated a 30% time saving, a reduction in work and error rate in the entire process.

The positional deviation of the Automatic Emergency Call System (AECS) under collision conditions brings difficulties for post-rescue operations. Currently, there is a lack of analysis on the system operating conditions during collisions in the reliability assessment methods for the Global Navigation Satellite System (GNSS) deployed in AECS. Therefore, this paper establishes an in-vehicle collision environment simulation model for emergency calls to explore the influence of parameters such as temperature and vibration on the data deviation of the simulated GNSS system. We also propose environmental limits applicable to comprehensive AECS tests, which can objec-tively evaluate the reliability of AECS and provide data support for AECS bench test. Through the satellite signal-based semi-physical simulation, AECS is subjected to bench test under different operating conditions. The findings of this study demonstrate that the occurrence of random vibra-tion and impact stress, induced by vibration, exerts considerable disruptive effects on positional signal data during collisions. Consequently, it leads to substantial interference with the accurate detection of post-collision satellite positioning information. When the simulation operates under a 2.4gRMS vibration condition, the maximum phase noise error in the positioning system is 8.95%, which does not meet the AECS test accuracy requirements. On the other hand, the semi-simulation system is less affected by temperature changes, and at the maximum allowable temperature dif-ference of the equipment, the maximum phase noise error in the simulated signal is 2.12%. Therefore, based on the influence of phase noise variation on the accuracy of satellite signal simulation, nec-essary environmental conditions for AECS test are obtained, including the temperature consistent with the maximum operating temperature of the vector generator and the vibration Power Spectral Density (PSD) lower than 1.2gRMS.

This paper addresses the issue of the automatic identification of river reaches and their planform type, given the (observed) set of geomorphic elements and units. It introduces further advances with respect to the original proposal by Nardini and Brierley. And it explores explicitly the ability of the algorithm and associated tools to work properly on significantly different rivers while adopting a given same parametrization. This was indeed an envisaged ability speculated as a challenging conclusion of the previous work. The Duqueco, Laja and Biobío rivers (Chile) are analyzed for this purpose. The conclusion is definitely positive, what opens future promising application horizons.

In this paper, we introduce a model for the automatic generation of literary sentences in French. It is based on algorithms that we have previously used to generate sentences in Spanish and Portuguese, and on a new corpus consisting of literary texts in French that we have constructed, called [FR]. Our automatic text generation algorithm combines language models, shallow parsing and deep learning, artificial neural networks. We have also proposed and implemented a manual evaluation protocol to assess the quality of the artificial sentences generated by our algorithm, by testing if they fulfill four simple criteria. We have obtained encouraging results from the evaluators for most of the desired features of our artificially generated sentences.

Reliable quantification of pulmonary arterial pressure is essential in the diagnostic and prognostic assessment of a range of cardiovascular pathologies including rheumatic heart disease, yet an accurate and routinely available method for its quantification remains elusive. This work proposes an approach to infer pulmonary arterial pressure based on scientific machine learning techniques and non-invasive, clinically available measurements. A 0-D multicompartment model of the cardiovascular system was optimized using several optimization algorithms, subject to forward-mode automatic differentiation. Measurement data were synthesized from known parameters to represent the healthy, mitral regurgitant, aortic stenosed and combined valvular disease situations with and without pulmonary hypertension. Eleven model parameters were selected for optimization based on 95 % explained variation in mean pulmonary arterial pressure. A hybrid Adam and limited-memory Broyden-Fletcher-Goldfarb-Shanno optimizer yielded the best results with input data including valvular flow rates, heart chamber volume changes and systematic arterial pressure. Mean absolute percentage errors ranged from 1.8 % to 3.78 % over the simulated test cases. The model was able to capture pressure dynamics under hypertensive conditions with pulmonary arterial systole, diastole, and mean pressure average percentage errors of 1.12 %, 2.49 % and 2.14 %, respectively. The relatively low errors highlight the potential of the proposed model to recover pulmonary pressures for diseased heart valve and pulmonary hypertensive conditions.

Alnus glutinosa is important woody plant in Lithuanian forest ecosystems. Knowledge of fluorescence properties of black alder pollen is necessary for scientific and practical purposes. By the results of the study we aimed to evaluate possibilities of identifying Alnus glutinosa pollen fluorescence properties by modeling ozone effect and applying two different fluorescence-based devices. To implement experiments, black alder pollen was collected in a typical habitat during the annual flowering period in 2018-2019. There were three groups of experimental variants, which differed in the duration of exposure to ozone, conditions of pollen storage before the start of the experiment, and the experiment start time. Data for pollen fluorescence analysis were collected using two methods. The microscopy method was used in order to evaluate the possibility of employing image analysis systems for investigation of pollen fluorescence. The second data collection method is related to the automatic device identifying pollen in real-time, which uses the fluorescence method in the pollen recognition process. Data were assessed employing image analysis and principal component analysis (PCA) methods. Digital images of ozone-exposed pollen observed under the fluorescence microscope showed the change of the dominant green colour towards the blue spectrum. Meanwhile, the automatic detector detects more pollen whose fluorescence is at the blue light spectrum. It must be noted that assessing pollen fluorescence several months after exposure to ozone, no effect of ozone on fluorescence remains.

The Medi-test system we developed was motivated by the large number of resources available for the medical domain, as well as the number of tests needed in this field (during and after the medical school) for evaluation, promotion, certification, etc. Generating questions to support learning and user interactivity has been an interesting and dynamic topic in NLP since the availability of e-book curricula and e-learning platforms. Current e-learning platforms offer increased support for student evaluation, with an emphasis in exploiting automation in both test generation and evaluation. In this context, our system is able to evaluate a student’s academic performance for the medical domain. Using as input medical reference texts and supported by a specially designed medical ontology, Medi-test generates different types of questionnaires for Romanian language. The evaluation includes 4 types of questions (multiple-choice, fill in the blanks, true/false and match), can have customizable length and difficulty and can be automatically graded. A recent extension of our system also allows for the generation of tests which include images. We evaluated our system with a local testing team, but also with a set of medicine students, and user satisfaction questionnaires showed that the system can be used to enhance learning.

Digital transformation in government services is seen as a progression towards offering more efficient and convenient services. In the wake of the COVID-19 pandemic, many governments worldwide have expedited the digitisation of their services to facilitate social distancing. Digital transformation encompasses the shift from manual, face-to-face services to automated, online-based systems. This process occurs in three stages: digitisation, digitalisation, and digital transformation. However, the varying stages of digital government implementation across countries impact service outcomes differently. Little research has been devoted to focusing on the outcome metrics crucial for the success of digital services, particularly in Kuwait. Moreover, although the existing literature has explored some metrics, specific metrics have been neglected. This study aimed to investigate current trends and preferences in digital government services usage using empirical quantitative data gathered from users of digital services in Kuwait. Specifically, the aim is fourfold: (i) to identify crucial outcome metrics for the success of digital services, (ii) to assess how users evaluate these services according to these metrics, (iii) to examine significant differences between digital transformation and digitalisation services, and (iv) to develop and validate a model for evaluating the success of digital transformation services. To achieve the study's objectives, 378 users of digital government services were surveyed quantitatively. This study found that users primarily access services through smartphones and applications, underscoring the need for mobile optimisation. There was a marked preference for real-time, automated services, with dissatisfaction for those requiring lengthy approval processes. Six key metrics were identified and grouped into three domains: service-related (customer satisfaction and service quality), convenience-related (accessibility and ease of use), and security-related (perceived security and perceived trust). Digital transformation services outperformed digitalisation services in five key areas: customer satisfaction, service quality, accessibility, ease of use, and perceived security, except perceived trust, which remained consistent across both service types. Several recommendations were proposed to advance government digital transformation services, boost efficiency, and enhance the user experience.

To maximize resource usage, minimize disputes, and improve academic experience, professors must schedule teaching activities efficiently. This study provides an optimized automated schedule creation technique. The system generates conflict-free, efficient schedules using evolutionary algorithms and multi-objective optimization. Resource usage, scheduling prob-lems, and faculty/student satisfaction are the goals of the research. The system optimizes scheduling based on room limitations, instructor availability, and student preferences. The project uses system design, model creation, algorithm implementation, and performance analysis to solve the difficult timetable-generating problem. This research should save administrators time, improve academic operations, and improve staff and student academic experiences. Scalability and flexibility allow the system to be used in multiple faculties and incorporate new limits and requirements. This paper presents a complete approach to faculty scheduling, including insights and recommendations for future study and application in educational institutions.

With the increasing use of automatic transmissions in passenger vehicles, there is a growing need for improved gear shifting control strategies that aim to enhance performance and fuel efficiency. This paper introduces a knowledge-based fuzzy control system designed specifically for automatic transmissions in light vehicles. The proposed system utilizes a fuzzy inference system as the controller, enabling the emulation of the driver’s perceptions during the gear shifting process. Consequently, the input signal consists of variables that are either sensitive to or observable by the driver, while the output represents the selected gear. The paper evaluates three distinct control strategies, each based on different inputs. These inputs include the longitudinal velocity of the vehicle, the angular velocity of the engine, or a combination of both, along with the time-derivative of the throttle valve opening. Through the evaluation, it is observed that the combination of inputs yields significantly improved performance. Therefore, the methodology presented in this paper demonstrates that the combined input approach is more effective for gear shifting control.

Artificial intelligence methods, especially artificial neural networks (ANNs), have increasingly been utilized for the mathematical description of physical phenomena in (metallic) material processing. Traditional methods often fall short in explaining the complex, real-world data ob-served in production. While ANN models, typically functioning as "black boxes," improve pro-duction efficiency, a deeper understanding of the phenomena, akin to that provided by explicit mathematical formulas, could enhance this efficiency further. This article proposes a general framework that leverages (CAE) ANNs to explain predicted results alongside their graphical presentation, marking a significant improvement over previous approaches and those relied on expert assessments. Unlike existing Explainable AI (XAI) methods, the proposed framework mimics the standard scientific methodology, utilizing minimal parameters for the mathematical representation of physical phenomena and their derivatives. Additionally, it analyzes the relia-bility and accuracy of the predictions using well-known statistical metrics, transitioning from deterministic to probabilistic descriptions for better handling of real-world phenomena. The proposed approach addresses both aleatory and epistemic uncertainties inherent in the data. The concept is demonstrated through the hot extrusion of aluminum alloy 6082, where CAE ANN models and predicts key parameters, and ChatGPT explains the results, enabling researchers and/or engineers to better understand the phenomena and outcomes obtained by ANNs.

In response to the burgeoning global demand for premium agricultural products, particularly within the competitive nut market, this paper introduces an innovative methodology aimed at enhancing the grading process for almonds and their shells. Leveraging state-of-the-art Deep Convolutional Neural Networks (CNNs), specifically the AlmondNet-20 architecture, our study achieves exceptional accuracy exceeding 99%, facilitated by the utilization of a 20-layer CNN model. To bolster robustness in differentiating between almonds and shells, data augmentation techniques are employed, ensuring the reliability and accuracy of our classification system. Our model, meticulously trained over 1000 epochs, demonstrates remarkable performance, boasting an accuracy rate of 99% alongside a minimal loss function of 0.0567. Rigorous evaluation through test datasets further validates the efficacy of our approach, revealing impeccable precision, recall, and F1-score metrics for almond detection. Beyond its technical prowess, this advanced classification system offers tangible benefits to both industry experts and non-specialists alike, ensuring globally reliable almond classification. The application of deep learning algorithms, as showcased in our study, not only enhances grading accuracy but also presents opportunities for product patents, thereby contributing to the economic value of our nation. Through the adoption of cutting-edge technologies such as the AlmondNet-20 model, we pave the way for future advancements in agricultural product classification, ultimately enriching global trade and economic prosperity.

Reducing waiting times is crucial for ports to be efficient and competitive. Important causes of waiting times are cascading interactions between realistic hydrodynamics, accessibility policies, vessel-priority rules, and detailed berth availability. The main challenges are determining the cause of waiting and finding rational solutions to reduce waiting time. In this study, we focus on the role of the design depth of a channel on the waiting times. We quantify the performance of channel depth for a representative fleet rather than the common approach of a single normative design vessel. It relies on a mesoscale agent-based discrete-event model that can take processed Automatic Identification System and hydrodynamic data as its main input. The presented method’s validity is assessed by hindcasting one year of observed anchorage area laytimes for a liquid bulk terminal in the Port of Rotterdam. The hindcast demonstrates that the method predicts the causes of 73.4% of the non-excessive laytimes of vessels, thereby correctly modelling 60.7% of the vessels-of-call. Following a recent deepening of the access channel, cascading waiting times due to tidal restrictions were found to be limited. Nonetheless, the importance of our approach is demonstrated by testing alternative maintained bed level designs, revealing the method’s potential to support rational decision-making in coastal zones.

In the extensive monitoring of maritime traffic, maritime management frequently encounters incomplete automatic identification system (AIS) data, particularly in critical static fields like vessel types. This shortfall presents substantial challenges in safety management, necessitating robust methods for data completion. Distinct from road traffic, where road width imposes constraints, maritime vessels of identical classifications often choose significantly divergent routes, deviating by several nautical miles. Sole dependence on trajectory clustering is insufficient. Addressing this issue, we segments the maritime area into spatiotemporal grids, transforming vessel paths into sequences of grid encodings. Utilizing natural language processing techniques, we integrate the Word2vec word embedding approach with our novel biLSTM self-attention chunk-max pooling net (biSAMNet) model, enhancing the classification of vessel trajectories. This method is crucial for determining static details like vessel types. Employing the Taiwan Strait as a case study and benchmarking against CNN, RNN, and methods based on the attention mechanism, our findings underscore our model’s superiority. The biSAMNet achieves an impressive vessel classification F1 score of 0.94, using only 5-dimensional word embeddings, highlighting the effectiveness of Word2vec pre-trained embedding layers. This research introduces a novel paradigm for processing vessel trajectory data, greatly enhancing the accuracy of filling in incomplete vessel type details.

Reducing the construction time for large logistics buildings can result in reduced construction management costs and economic gains from early operation. A large logistic building with a heavy load and long spans was constructed as a precast concrete (PC) structure, which requires the use of a sizable crane to lift heavy PC members. A basic analytical approach is employed to resolve potential errors in the planning of PC member erection and to build a systematic erection plan. Calculation techniques for the trajectory distance, which use the crane location, are applied to select an erection plan that minimizes crane work. A crane trajectory distance calculation algorithm for sustainable PC member erection in large logistic buildings with heavy loads and long spans has been developed. The developed model aids in creating simulation and optimization models to ensure minimal usage of cranes in the future and determining cost, construction time, CO2 emissions, and energy use for each erection plan.

Multi- and hyper-spectral, multi-angular top-of-canopy reflectance data call for an efficient retrieval system which can improve the retrieval of standard canopy parameters (as albedo, LAI, fAPAR), and exploit the information to retrieve additional parameters (e.g. leaf pigments). Furthermore consistency between the retrieved parameters and quantification of uncertainties are required for many applications. % (2) methods We present a retrieval system for canopy and sub-canopy parameters (OptiSAIL), which is based on a model comprising SAIL, PROSPECT-D (leaf properties), TARTES (snow properties), a soil model (BRDF, moisture), and a cloud contamination model. The inversion is gradient based and uses codes % created by Automatic Differentiation. The full per pixel covariance-matrix of the retrieved parameters is computed. For this demonstration, single observation data from the Sentinel-3 SY_2_SYN (synergy) product is used. The results are compared with the MODIS 4-day LAI/fPAR product and PhenoCam site photography. OptiSAIL produces generally consistent and credible results, at least matching the quality of the technically quite different MODIS product. For most of the sites, the PhenoCam images support the OptiSAIL retrievals. The system is computationally efficient with a rate of 150 pixel per second (7 millisecond per pixel) for a single thread on a current desktop CPU using observations on 26 bands. Not all of the model parameters are well determined in all situations. Significant correlations between the parameters are found, which can change sign and magnitude over time. OptiSAIL appears to meet the design goals, puts real-time processing with this kind of system into reach, seamlessly extends to hyper-spectral and multi-sensor retrievals, and promises to be a good platform for sensitivity studies. The incorporated cloud and snow detection adds to the robustness of the system.

Soil moisture (SM) products derived from passive satellite missions are playing an increasingly important role in agricultural applications, especially in crop monitoring and disaster warning. Evaluating the dependability of those products before they can be used on a large scale is crucial. In this study, we assessed the level 2 (L2) SM product from the Chinese Fengyun-3C (FY-3C) radiometer against in situ measurements collected from the Chinese Automatic Soil Moisture Observation Stations (CASMOS) during a one-year period from January 1 to December 31, 2016 in Henan, which is an agricultural province in China. Four statistical parameters were used to evaluate the products’ reliability: mean difference, root-mean-square error (RMSE), unbiased RMSE (ubRMSE), and the correlation coefficient. These statistical indicators revealed that the FY-3C L2 SM product generally did not agree with the in situ SM data from CASMOS. The time-series analysis further indicated that the correlations and estimated error were highly related to the growing periods of the crops in our study area. FY-3C L2 SM data tended to overestimate soil moisture during May, August, and September, when the crops reach their maximum vegetation density, and tended to underestimate the soil moisture content during the rest of the year. The averaged correlation coefficient between FY-3C SM and the Moderate Resolution Imaging Spectroradiometer (MODIS) normalized difference vegetation index was 0.55, which demonstrates that the vegetation water content of the crops considerably influences the SM product. To improve the accuracy of the FY-3C SM product, an improved algorithm that can filter out the influences of the crops should be applied in the future.

In table tennis competitions the rule violation judgment with the greatest controversy is the height of the ball serve. This is because inaccuracy in the ball height judgment, which results in erroneous judgment, is unavoidable. Thus, we designed an automatic image judgment auxiliary system for table tennis ball height during service in this study. We used a high-speed camera to record the ball toss in the table tennis service. The designed algorithm architecture can automatically search for the ball and the position of the hand action under low light source conditions. The algorithm is mainly divided into hue-saturation-value color space processing and morphology processing using Hough transform to search for the circular ball. Experiment result shows that color segmentation can successfully and accurately determine the ball position under low light conditions. The morphology method can find the position of the hand and help determine the moment when the ball leaves the hand during the service ball toss. Finally, the actual size of the target is used to estimate the actual distance unit represented by the image pixel.

Generator automatic voltage control device (AVC) is an automatic voltage and reactive power optimization control terminal on the power plant side. Aiming at improving the performance of generator automatic voltage control device, this paper introduces a detection method of AVC substation performance based on virtual dispatching terminal environment. During the testing, the upper computer of redundant power plant is connected to the virtual dispatching terminal environment to simulate the sending instructions of AVC master station, the behavior of AVC sub stations and the excitation system of generators. The performance of AVC substation is evaluated according to the feedback adjustment results, which can effectively detect the abnormal behavior of AVC substation in power plant.

Over the past decades, overweight and obesity has become a global epidemic and the leading threat for death. To prevent the serious risk, an overweight or obese individual must apply a long-term weight-management strategy to control food intake and physical activities, which is however, not easy. Recently, with the advances of information technology, more and more people can use wearable devices and smartphones to obtain physical activity information, while they can also access various health-related information from Internet online social networks (OSNs). Nevertheless, there is a lack of an integrated approach that can combine these two methods in an efficient way. In this paper, we address this issue and propose a novel mobile-social framework for health recognition and recommendation, namely, H-Rec². The main ideas of H-Rec² include (1) to recognize the individual's health status using smartphone as a general platform, and (2) to recommend physical activity and food intake based on personal health information, life science principles, and health-related information obtained from OSNs. To demonstrate the potentials of the H-Rec² framework, we develop a prototype that consists of four important components: (1) an activity recognition module that senses physical activity using accelerometer, (2) a health status modeling module that applies a novel algorithm to generate personalized health status index, (3) a restaurant information collection module that collects relevant information from OSN, and (4) a restaurant recommendation module that provides personalized and context-aware recommendation. To evaluate the prototype, we conduct both objective and subjective experiments, which confirm the performance and effectiveness of the proposed system.

Background: Although insect-based foods (IBF) have been recently proposed as a way to face climate crisis and starvation, they encounter the aversion from Western countries which perceive fear, disgust, and high risk. The contribution of psychology research to food choices highlighted how decisions are taken not only through reasoned attitudes and goal-directed behavior, but also through more automatic associations (dual-systems models). Methods: In this paper we investigated people’s disposition towards IBF by combining (a) explicit attitudes (as assessed via self-report scales), (b) automatic associations (as measured via indirect measures), (c) intention to taste, and comparing different profiles based on (d) psychological factors, including decision-making style, food neophobia, and trust in science and scientist. A pilot sample of 175 Italian University students participated in the study. Results: The analyses on the general sample highlighted rather negative attitudes. The cluster analysis identified 4 decision-making profiles: “the gut-feeling”, “the suspicious”, “the vicarious”, and “the mind”. It revealed more favorable opinions in “the mind” profile, characterized by a rational decision-making style and high trust in science, and very aversive reactions from “the suspicious” profile, characterized by high food neophobia and low trust in science. Conclusions: The results underline the importance of psychological factors in interpreting people's reactions to IBF and changes in dietary habits based on the decision-making process. They suggest possible strategies to promote eco-friendly diets

More and more people quantify their sleep using wearables and are getting obsessed in their pursuit of optimal sleep (“orthosomnia”). However, it is criticized that many of these wearables are giving inaccurate feedback and even can lead to negative daytime consequences. Acknowledging these facts, we here aim to extend previous findings [] in a new sample of 136 self-reported poor sleepers by implementing optimization procedures to minimize erroneous classification when ambulatory sensing sleep. Firstly, here, we introduce an advanced interbeat-interval (IBI) quality control using a random forest method to account for wearable recordings in naturalistic and more noisy settings. We further aim to improve sleep classification by opting for a loss function model instead of overall epoch-by-epoch accuracy to avoid model biases towards the majority class (i.e., “light sleep”). Using these implementations, we compare the classification performance between the optimized (loss function model) and the accuracy model. We use signals derived from PSG, one-channel ECG, and two consumer wearables: the ECG breast belt Polar® H10 (H10) and the Polar® Verity Sense (VS), an optical Photoplethysmography (PPG) heart-rate sensor. Results reveal high overall accuracy for the new model for ECG (86.3 %, κ=.79), H10 (84.4%, κ=.76), and VS (84.2%, κ=.75) with intended improvements in deep sleep and wake. In addition, the new optimized model displays moderate to high correlations and agreement with PSG on primary sleep parameters, while measures of reliability, expressed in intra-class correlations, suggest excellent reliability for most sleep parameters. Finally, it is demonstrated that the new model is still classifying sleep accurately in 4-classes in users taking heart-affecting and/or psychoactive medication which can be considered a prerequisite for use also in high age groups and/or with common disorders. Further improving and validating sleep stage classification algorithms with affordable wearables may resolve existing scepticism and open the door for such approaches in clinical practice.

Due to resource constraints, most Diamond Open Access journals publish less than 25 articles per year, and 75% of journals are not able to provide their content in XML and HTML, primarily providing only PDFs (Bosman et al., 2021, p. 7-8). In order to keep up with larger commercial publishers, a high degree of automation and streamlining of processes is necessary. The Open Source Academic Publishing Suite (OS-APS) project funded by the German Federal Ministry of Education and Research aims to achieve this. OS-APS automatically extracts the underlying XML from Word manuscripts and offers optimization and export options in various formats (PDF, HTML, EPUB). The professional corporate design, e.g., of the PDFs, is managed automatically by using templates or creating one's own using a Template Development Kit. OS-APS will also connect to scholarly-led and community-driven publishing platforms such as Open Journal Systems (OJS), Open Monograph Press (OMP), and DSpace: the software will be able to be integrated into a wide range of publication processes, whether at small, low-resource commercial Open Access Publishers, or institutional and Diamond Open Access Publishers. References: Bosman, J., Frantsvåg, J. E., Kramer, B., Langlais, P.‑C., &amp; Proudman, V. (2021). Oa Diamond Journals Study. Part 1: Findings. https://doi.org/10.5281/zenodo.4558703

Lesion studies are crucial in establishing brain-behavior relationships, and accurately segmenting the lesion represents the first step in achieving this. Manual lesion segmentation is the gold standard for chronic strokes. However, it is labor-intensive, subject to bias, and limits sample size. Therefore, our objective is to develop an automatic segmentation algorithm for chronic stroke lesions on T1-weighted MR images. Methods: To train our model, we utilized an open-source dataset: ATLAS v2.0 (Anatomical Tracings of Lesions After Stroke). We partitioned the dataset of 655 T1 images with manual segmentation labels into five subsets and performed a 5-fold cross-validation to avoid overfitting of the model. We used a deep neural network (DNN) architecture for model training. Results: To evaluate the model performance, we used three metrics that pertain to diverse aspects of volumetric segmentation including shape, location, and size. The Dice similarity coefficient (DSC) compares the spatial overlap between manual and machine segmentation. The average DSC was 0.65 (0.61- 0.67; 95% bootstrapped CI). Average symmetric surface distance (ASSD) measures contour distances between the two segmentations. ASSD between manual and automatic segmentation was 12mm. Finally, we compared the total lesion volumes and the Pearson correlation coefficient (ρ) between the manual and automatically segmented lesion volumes, which was 0.97(p-value &lt; 0.001). Conclusions: We present the first automated segmentation model trained on a large multicentric dataset. This model will enable automated on-demand processing of MRI scans and quantitative chronic stroke lesion assessment.

The work is devoted to the study of a MEMS resonator dynamics under the action of phase-locked and automatic gain control loops. Particular attention is directed to the study of the nonlinearity factor of the resonator elastic restoring force. It was found that the determination of control system parameters based on the stability analysis of the operating resonant mode, in the general case, does not provide the required phase adjustment and stabilization of the oscillation amplitude. Stable multifrequency modes of oscillations are found, an analytical study of the mechanisms of their appearance and evolution is carried out under variation of the key parameters of the system. The real regions of the control system stable operation are determined (which do not coincide, as was found, with the regions of stability of the operating resonant mode, due to the presence of hidden attractors in the phase space of the system). A methodology has been developed for identifying such areas of stable operation. A significant complication of the structure of possible motions in the system with an increase in the Q-factor of the resonator is revealed.

The article presents a new approach to the analysis of the stability of automatic systems with discrete links.In almost all modern automatic control systems, there are links that break signals in time. These are power controlled switches - transistors or thyristors operating in a pulsed mode and digital links in regulators.Time discretization significantly affects the stability of processes in the automatic control system. The theoretical analysis of such systems is rather complicated and requires a significant change in engineering approaches to analysis. In connection with the improvement of digital controllers and a significant increase in their performance, in recent years this problem has practically not been remembered. However, its mathematical "content" has not changed since the 80s of the 20th century, when discreteness began to play a major role among the problems hindering progress in automatic control systems, in terms of the transition to digital systems.In this paper, a new approach is proposed, which consists in interpreting the sampling operation by a link with the proposed frequency characteristic, which determines the suppression of input high-frequency signals. This link greatly simplifies engineering calculations and demonstrates the new capabilities of sampling systems. These possibilities include the rational distribution of digitalization resources - the number of bits and the sampling interval between the regulator channels, depending on the frequency range of the efficiency of these channels. Theoretical statements have been verified and confirmed by simulation. It is shown how this approach makes it possible to formulate new principles of construction of seemingly well-known controllers - PID controllers and variable structure systems (VSS).

We hypothesized possibility that inline registered reticulorumen pH can be as biomarker of cows reproduction and health status. Aim of this study was to evaluate the relationship of reticulorumen pH with biomarkers from automatic milking system (AMS) and some blood parameters and determinate reticulorumen pH as biomarker of cows reproduction and health status. According to cows reproductive status the cows were classified as belonging to the following four groups: 15-30 d. postpartum; 1-34 d. after insemination; 35 d. after insemination (non-pregnant); 35 d. after insemination (pregnant). According reticulorumen pH assay experimental animals were divided into four classes: 1) pH<6.22 (5.3% of cows), 2) pH - 6.22-6.42 (42.1% of cows), 3) pH - 6.42-6.62 (21.1% of cows), 4) pH >6.62 (10.5% of cows). Rumination time, body weight, milk yield, milk fat – protein ratio, milk lactose, milk somatic cell count (SCC), milk electrical conductivity of all quarters of udder were registered with the help of Lely Astronaut® A3 milking robots. The pH, temperature of the contents of cow reticulorumens and cow activity were measured using specific smaX-tec boluses. Blood gas parameters were analyzed using a blood gas analyzer (EPOC, Canada). We found that pregnant cows has higher reticulorumen pH during insemination time, comparing with non-pregnant. Cows with lower reticulorumen pH has lowest milk fat – protein ratio, and lactose concentration, and highest SCC. Cows with lowest reticulorumen pH has lowest blood pH. With increase reticulorumen pH, increases blood potasium and hematocrit, decreases CO2, saturation and sodium.

Simulator training for image-guided surgical interventions may benefit from artificial intelligence systems that control the evolution of task skills in terms of time and precision of a trainee's performance on the basis of fully automatic feed-back systems. At the earliest stages of training, novice trainees frequently focus on getting faster at the task, and may thereby compromise the optimal evolution of the precision of their performance. For automatically guiding them towards attaining an optimal speed-accuracy trade-off, an effective control system for the reinforcement/correction of strategies must be able to exploit the right individual performance criteria in the right way, reliably detect individual performance trends at any given moment in time, and alert the trainee, as early as necessary, when to slow down and focus on precision, or when to focus on getting faster. This article addresses several aspects of this challenge for speed-accuracy controlled simulator training before any training on specific surgical tasks or clinical models should be envisaged. Analyses of individual learning curves from the simulator training sessions of novices and benchmark performance data of one expert surgeon, who had no specific training in the simulator task, validate the suggested approach.

Deep learning has recently attracted much attention due to its excellent performance in processing audio, image, and video data. However, few studies are devoted to the field of automatic modulation classification (AMC). It is one of the most well-known research topics in communication signal recognition, which remains challenging for traditional methods due to the complex disturbance from other sources. This paper proposes a heterogeneous deep model fusion (HDMF) method to solve the problem in a unified framework. The contributions include: 1) The convolutional neural network (CNN) and long short-term memory (LSTM) are combined by two different ways without prior knowledge involved; 2) A large database, including eleven types of single-carrier modulation signals with various noises as well as a fading channel, is collected with various signal-to-noise ratios (SNRs) based on a real geographical environment; and 3) Experimental results demonstrate that HDMF is super capable of copping with the AMC problem, and achieves much better performance when compared with the independent network. The source code and the database will be publically available.

Launched on 2 February 2018, CSES is the first constellation in China to advance our understanding of seismo-ionospheric influence and lithosphere-atmosphere-ionosphere coupling process in electromagnetic environment during earthquake prediction practice. For this purpose, a software platform developed for automatically searching ionospheric perturbations from the CSES plasma data had been put into service immediately after the Wushi MS 7.1 earthquake occurred on 23 January 2024 to weekly detect possible precursory information before impending aftershocks. Effective ionospheric variations were successfully detected two times during more than four weeks. An ionospheric perturbation with an enhanced magnitude 38.3% was primarily detected on electron density but none on ion density on 24 January 2024 at night orbit 33175 and the corresponding variations in different parameters recorded at the same orbit presented a complex features. There irregularities possibly combined with influence both from three following strong aftershocks with magnitudes over 5.0 during 25–30, January and magnetic storm disturbance due to Kp value once up to 3.7 on 24 January. An electron perturbation with an amplitude 24.6%, as well as an ion one with 27.3%, was successfully searched automatically at the same revisiting orbit 33251 occurred on the revisiting date of 3 February 2024 in a magnetic quiet period. These two plasma variations, as well as ones on other ionospheric parameters, were characterized by highly similar properties, which increases the availability as seismic precursors. However, no obvious variations had been observed at other revisiting orbits or other orbits near the aftershock areas during this period till the occurrence of a magnitude 5.3 earthquake on 24 February and the strongest one 5.8 on 25 February, respectively, 20 days after and 1000 km away.

Nollywood, based on the idea of Bollywood from India, is a series of outstanding movies that originate from Nigeria. Unfortunately, while the movies are in English, they are hard to understand for many native speakers due to the dialect of English that is spoken. In this article, we accomplish two goals: (1) create a phonetic sub-title model that is able to translate Nigerian English speech to American English and (2) use the most advanced toxicity detectors to discover how toxic the speech is. Our aim is to highlight the text in these videos which is often times ignored for lack of dialectal understanding due the fact that many people in Nigeria speak a native language like Hausa at home.

Since the creation of the first parallel electrical power systems around the world, the rotor angle stability of synchronously operating generators has been one of the most crucial and challenging problems. In modern electricity networks, involving Kazakhstani, where the renewable energy technologies are rapidly penetrating, and the issue of stability takes on even greater importance due to the technical shortcomings of inverter-based generation. In this framework, an analysis of rotor angle transient stability was carried out when replacing existing synchronous generators with doubly fed induction generators under a certain pre-emergency mode. A critical proportion of active power generation by DFIG units was identified at which transient stability can still be maintained due to the sufficient stored kinetic energy of the synchronous machines remaining in operation. In addition, 2 simple solutions were investigated to improve transient stability, such as an increased time of the automatic reclosure operation and the use of special load shedding automation. For the analysis, a real power system of Mangystau region in Kazakhstan was considered, and the PowerWorld software was used.

The paper deals with the Model Predictive Control (MPC) algorithm as applied to the sensorless control of a Permanent Magnet Synchronous Motor (PMSM). The proposed estimation strategy, based on the unscented Kalman filter (UKF), uses only the measurement of the motor current for the online estimation of speed, rotor position and load torque. Information about the system state feeds the MPC. Results verify the effectiveness and applicability of the proposed sensorless control technique. An implementation in low speed direct drive astronomy telescope mount systems is investigated.

People often make mistakes, so we try to automate every aspect of our lives. Sports is no exception. While just over a decade ago humans were analyzing games, today this is being done by artificial intelligence. Due to rapid development over the past decade, neural networks are now faster, more accurate, and in some areas even better than their human counterparts. In this paper, we present an algorithm that can detect player statistics during an NBA broadcast. It also helps users better understand the game and the use of augmented reality. The algorithm detects players on the court, tracks their movements, and assigns them to their respective teams. Using homography estimation, we transform the players’ positions from a three-dimensional space in the video to a two-dimensional space on the playing field plane. We define a new algorithm that predicts the players’ actions and their statistics. The results show that the proposed method can effectively identify the players, their respective teams, and their positions. It can also analyze their actions with high accuracy.

Animal research has always been crucial for various medical and scientific breakthroughs, providing information on disease mechanisms, genetic predisposition to diseases, and pharmacological treatment. However, the use of animals in medical research is a source of great controversy and ongoing debate in modern science. To ensure a high level of bioethics, new guidelines have been adopted to replace animal testing wherever possible, reduce the number of animals per experiment, and refine procedures to minimize stress and pain. Supporting these guidelines, this article proposes a novel approach for unobtrusive, continuous, and automated monitoring of the respiratory rate of laboratory rats. It uses the cyclical expansion and contraction of the rats’ thorax/abdominal region to determine this physiological parameter. In contrast to previous work, the focus is on unconstrained animals, which requires the algorithms to be especially robust to motion artifacts. To test the feasibility of the proposed approach, video material of multiple rats was recorded and evaluated. High agreement was obtained between RGB-imaging and the reference method (respiratory rate derived from electrocardiography), which was reflected in a relative error of 5.46%. The current work shows that camera-based technologies are promising and relevant alternatives for monitoring the respiratory rate of unconstrained rats, contributing to the development of new alternatives for continuous and objective assessment of animal welfare and hereby guiding the way to modern and bioethical research.

In the development of the safety-critical systems, it is important to perform Failure Modes and Effects Analysis (FMEA) process to identify potential failures. However, traditional FMEA activities tend to be considered difficult and time-consuming tasks. To compensate for the difficulty of the FMEA task, various types of tools are used to increase the quality and the effectiveness of the FMEA reports. This paper explains an Automatic FMEA tool which integrates the Model-based Design (MBD), FMEA, and Simulated Fault Injection techniques in a single environment. The Automatic FMEA tool has the following advantages compared to the existing FMEA analysis tool. First, the Automatic FMEA tool automatically generates FMEA reports compared to the traditional spreadsheet-based FMEA tools. Second, the Automatic FMEA tool analyzes the causality between the failure modes and the failure effects by performing model-based fault injection simulation. In order to demonstrate the applicability of the Automatic FMEA, we used the electronic fuel injection system (EFI) Simulink model. The results of the Automatic FMEA were compared to that of the legacy FMEA.

In this paper, we present a framework that automatically labels Latent Dirichlet Allocation (LDA) generated topics using sentiment and aspect terms from COVID-19 tweets to help the end-users by minimizing the cognitive overhead of identifying key topics labels. Social media platforms especially Twitter are considered as one of the most influential sources of information for providing public opinion related to a critical situation like the COVID-19 pandemic. LDA is a popular topic modelling algorithm that extracts hidden themes of documents without assigning a specific label. Thus automatic labelling of LDA-generated topics from COVID-19 tweets is a great challenge instead of following the manual labelling approach to get an overview of wider public opinion. To overcome this problem, in this paper, we propose a framework named \texttt{SATLabel} that effectively identifies significant topic labels using \textit{top unigrams features of sentiment terms and aspect terms clusters from LDA generated topics} of COVID-19 related tweets to uncover various issues related to the COVID-19 pandemic. The experimental results show that our methodology is more effective, simpler, and traces better topic labels compare to the manual topic labelling approach.

Machine learning (ML) is increasingly useful as data grows in volume and accessibility as it can perform tasks (e.g. categorisation, decision making, anomaly detection, etc.) through experience and without explicit instruction, even when the data are too vast, complex, highly variable, full of errors to be analysed in other ways , . Thus, ML is great for natural language, images, or other complex and messy data available in large and growing volumes. Selecting a ML algorithm depends on many factors as algorithms vary in supervision needed, tolerable error levels, and ability to account for order or temporal context, among many other things. Importantly, ML methods for explicitly ordered or time-dependent data struggle with errors or data asymmetry. Most data are at least implicitly ordered, potentially allowing a hidden `arrow of time’ to affect non-temporal ML performance. This research explores the interaction of ML and implicit order by training two ML algorithms on Twitter data before performing automatic classification tasks under conditions that balance volume and complexity of data. Results show that performance was affected, suggesting that researchers should carefully consider time when selecting appropriate ML algorithms, even when time is only implicitly included.

Hopfield Neural Networks (HNNs) are recurrent neural networks used to implement associative memory. Their main feature is their ability to pattern recognition, optimization, or image segmentation. However, sometimes it is not easy to provide the users with good explanations about the results obtained with them due to mainly the large number of changes in the state of neurons (and their weights) produced during a problem of machine learning. There are currently limited techniques to visualize, verbalize, or abstract HNNs. This paper outlines how we can construct automatic video generation systems to explain their execution. This work constitutes a novel approach to get explainable artificial intelligence systems in general and HNNs in particular building on the theory of data-to-text systems and software visualization approaches. We present a complete methodology to build these kinds of systems. Software architecture is also designed, implemented, and tested. Technical details about the implementation are also detailed and explained. Finally, we apply our approach for creating a complete explainer video about the execution of HNNs on a small recognition problem.

Forensic speaker recognition plays a key role in criminal investigations, providing important conclusions for the justice system. The mandatory use of protection masks during the COVID-19 pandemic has posed a challenge for forensic speaker recognition, as they act as voice barriers or filters. Although the pandemic has been declared over, analyzing their impact in forensic speaker recognition contributes to a better understanding of the use of coverings as a voice disguise technique. This study aims to evaluate the impact of two types of face masks on an automatic forensic speech recognition system. For this purpose, the Multilingual Forensic Voice Database (FMVD), developed under the CERTAIN-FORS project, funded by the European Union, was used. Comparisons were made between dialog speech samples and reading samples collected without a mask, with a surgical mask, and with an FFP2 mask for both sexes in eight different languages. The performance metrics equal error rate (EER) and cost of likelihood ratio (Cllr) were calculated and analyzed. The results show that the presence of face masks has an impact on the performance metrics. The effect observed varies according to the language spoken, the gender of the speaker, and the type of mask.

PET imaging with [¹⁸F]F-DOPA has demonstrated high potential for the evaluation and management of pediatric brain gliomas. Manual extraction of PET parameters is time-consuming, lacks reproducibility, and varies with operator experience. In this study, we tested whether a semi-automated image processing framework could overcome these limitations. Pediatric patients with available static and/or dynamic [¹⁸F]F-DOPA PET studies were evaluated retrospectively. We developed a Python software to automate clinical index calculations, including preprocessing to delineate tumor volumes from structural MRI, accounting for lesions with low [¹⁸F]F-DOPA uptake. 73 subjects with treatment-naïve low and high-grade gliomas, who underwent brain MRI within two weeks of [¹⁸vF]F-DOPA PET, were included and analyzed. Static analysis was conducted on all subjects, while dynamic analysis was performed on 32 patients. For 68 subjects, the Intraclass Correlation Coefficient for T/S between manual and ground truth segmentation was 0.91. Using our tool, ICC improved to 0.94. Our method demonstrated good reproducibility in extracting static tumor-to-striatum ratio (p = 0.357), though significant differences were observed in tumor slope (p < 0.05). No significant differences were found in time-to-peak (p = 0.167) and striatum slope (p = 0.36). Our framework aids in analyzing [¹⁸F]F-DOPA PET images of pediatric brain tumors by automating clinical score extraction, simplifying segmentation and Time Activity Curve extraction, reducing user variability, and enhancing reproducibility.

In this study a novel approach of designing automatic control systems with the help of AI tools is proposed. Given plant dynamics, expected references, and expected disturbances, design of optimal neural-network based controller is done automatically. Several common reference types are studied including step, square, sine, sawtooth and trapezoid functions. Expected reference-disturbance pairs are used to train the system for finding optimal neural-network controller parameters. A separate test set is used to test the system for unexpected reference-disturbance pairs to show the generalization performance of the proposed system. Parameters of a real DC motor are used to test the proposed approach. Real DC motor’s parameters are estimated using particle swarm optimization (PSO) algorithm. Initially, a proportional-integral (PI) controller is designed using PSO algorithm for finding simple controller’s parameters optimally and automatically. Starting with neural-network equivalent of optimal PI controller, optimal neural-network controller is designed using PSO algorithm for training again. Simulations are conducted with estimated parameters for diverse set of training and test patterns. Results are compared with optimal PI controller’s performance and reported in the corresponding section. Encouraging results are obtained suggesting further research in the proposed direction.

With prosperous development and successful application of deep learning technologies in the field of remote sensing, numerous deep-learning based methods have emerged for synthetic aperture radar (SAR) automatic target recognition (ATR) tasks over the past few years. Generally, most deep-learning based methods can achieve outstanding recognition performance in condition that an abundant of labeled samples are available to train the model. However, in real application scenarios, it is difficult and costly to acquire and to annotate abundant SAR images due to the imaging mechanism of SAR, which poses a big challenge to existing SAR ATR methods. Thereby, SAR target recognition under the situation of few-shot, where only a scarcely few of labeled samples are available, is a fundamental problem that needs to be solved. In this paper, we put forward a new method named enhanced prototypical network with customized region-aware convolution (CRCEPN) to specially tackle the few-shot SAR ATR tasks. To be specific, We first develop a feature extraction network based on a customized and region-aware convolution, which can adaptively adjust convolutional kernels and their receptive fields according to each SAR image’s own characteristics as well as the semantical similarity among spatial regions, thus augmenting its capability to extract more informative and discriminative features. To achieve accurate and robust target identity prediction under the few-shot condition, we then propose an enhanced prototypical network which can improve the representation ability of the class prototype by properly making use of training and test samples together, thus effectively raising the classification accuracy. Meanwhile, a new hybrid loss is designed to learn a feature space with both inter-class separability and intra-class tightness as much as possible, which can further upgrade the recognition performance of the proposed method. Experiments performed on the moving and stationary target acquisition and recognition (MSTAR) dataset and the OpenSARShip dataset demonstrate that the proposed method is competitive with some state-of-the-art methods for few-shot SAR ATR tasks.

Pilots can be one of the factors in many air traffic accidents. When one or both pilots are impaired (e.g. fatigue, drunk), disabled, capable but wrong-headed, don’t have sufficient training, distracted, miscommunicate with the air traffic controller, or follow wrong instructions from the air traffic controller, the risk of accident will increase dramatically. In some of these cases, the risk can be mitigated by using big data and machine learning. The system will collect and analyze large amount of data about the state of the aircraft, e.g., the flight path, the immediate environment around the aircraft, the weather and terrain information, and the pilots’ input to control the aircraft. Additional sensors such as eye tracking devices and biological monitor can also be added to determine the condition of the pilots. If the pilots’ input do not match proper reaction to the situation or the pilots are impaired, the learning machine will first provide an advisory to the pilots. If both pilots are impaired or incapable, a warning will be sent to the flight attendants and air traffic controllers so that they can take appropriate actions. The learning machine will be trained by both accident database and an automatic training system.

In the dynamic field of mental health care, the nuanced application of Artificial Intelligence (AI) through Natural Language Processing (NLP) and Automatic Speech Recognition (ASR) is a pivotal innovation in patient empowerment and service optimization. This study introduces a distinctive online therapy platform that capitalizes on the synergy of NLP and ASR to offer unprecedented levels of interactive and personalized therapeutic interventions. The architecture of our system is meticulously detailed, featuring an ASR component with an impressive Word Error Rate (WER) of 14% when trained on the diverse French subsets of the Mozilla Common Voice dataset, complemented by a high-precision NLP framework skilled in processing and responding to user inputs. The evaluation of our system highlights its efficacy in enhancing therapy sessions and user satisfaction, with an emphasis on the qualitative aspects of user feedback. The paper addresses challenges such as dataset representativeness and language model refinement and articulates the strategic solutions employed to overcome them. The paper concludes with forward-looking perspectives on AI's role in mental health services, advocating for the creation of sophisticated, language-specific datasets and models to satisfy the increasing demands of online therapy, reflecting a growing commitment of patients in the management of their therapy. This research underscores the transformative impact of AI in advancing mental health care into the digital age, representing a significant evolution over existing methodologies.

Bhutan located in the Hindu Kush Himalayan (HKH) region consists of several glaciers and glacial lakes at higher elevations.  With the rapid change in global temperature, glaciers are found to melt at an accelerated rate. This rapid melt of glaciers gets accumulated in weak moraine walls forming a glacial lake, posing a major threat to the downstream communities. As per the Bhutan Glacial Lake Inventory 2021, Bhutan has 567 glacial lakes. Furthermore, the Phochhu basin has the maximum glacial lakes (0.05%) and of which 9 are PDGL. Hence a need for a time monitoring system is imminent. With the availability of free High-resolution Satellite Imageries and Advanced Remote Sensing tools, it has been a sine qua no for monitoring glacial lakes in high areas. Therefore, using the Google Earth Engine and Qgis Platform a semi-automated technique was used to generate glacial lake inventories for Phochhu Sub-basin for the year 2021.  We found out that there are 166 glacial lakes covering an area of 24.051 km2.