This paper presents the mathematical modeling for designing a 10[kW] DC-AC inverter system from 48 [V] DC to 120 V ACrms, considering its non-linear operation, allowing to obtain a detailed simulation to assess the proposed fuzzy PI control (with anti-windup action) and its optimal operation. The performance assessment of the converter was carried out with the discrete treatment of the voltage and current signals using spectral analysis, filtering considerations, and evaluation of limit cycle technique to determine the system's stability. The main results showed that THD at the filter output (transformer and capacitor) was around 0.0322% and 0.0632% at nominal load in open loop and closed loop, respectively. The inverter system presented more sensitivity in the current signal with a ripple at 120 [Hz] of 2.02% and at 5000 [Hz] of 10.62% (at nominal load). However, when the system operates in a closed loop, the current ripple at 120 [Hz] is 2.38% and at 5000 [Hz] is 10.62%.

As a result of the COVID 19 outbreak that has affected the whole world, teacher leadership has gained more significance. Teacher leadership is a multidimensional concept. While some teachers exercise leadership only at the classroom level, others exercise leadership at macro level. This level of leadership enactment is directly related to how teachers construct their professional identity in relation to leadership. This study aims to explore the leadership-related professional identities of teachers who came to the fore especially during the COVID 19 pandemic period by using the latent profile analysis method. The data were collected a sample of 710 teachers. Teachers completed Teacher Leadership Behavior Scale that measures teacher leadership behaviors at four levels: classroom, parental, micro-level, macro-level. Participants also completed Rosenberg Self-Esteem Scale, Teacher Self-Efficacy Scale, Openness to Authority Scale, and Job Satisfaction Scale. As a result of latent profile analysis, three distinct profiles of teacher leadership identity emerged: those who exercise leadership at a minimum level, an intermediate level and a maximum level across all four levels of teacher leadership. These profiles were labeled as "extended professionality," "intermediate professionality," and "restricted professionality," drawing upon Hoyle's (1974) conceptualization of teacher professional identity. These findings suggest that teachers construct their identity differently about teacher leadership. It is essential for school leaders to first explore those different levels of professional identity and tailor their professional development activities accordingly.

The successful handling of large semiconductor wafers is crucial for scaling up their production. Early-stage warpage control allows to prevent undesirable asymmetric warpage, known as wafer bifurcation or buckling. Indeed, even in a gravity-free environment, thinning an 8" or 12" semiconductor wafer can result in warpage and bifurcation. To mitigate this issue, the taiko method, which involves creating a thicker ring region around the rim of the wafer, has been widely used. Previous research has focused on the theoretical factors affecting the warpage of a backside metalized taiko wafer. This work extends the case to a front-side metalized taiko wafer and introduces the concept of the equivalent thickness of a taiko wafer. The equivalent thickness of a taiko wafer, influenced by the ring region, lies in between the thickness of the central region and that of the annular region. Because of the limited number of taiko wafers that can be produced on a production line, modelling can be beneficial. In this work we compared the results of a developed analytical model with those obtained from a finite element analysis (FEA) approach with ANSYSY® software to model the equivalent thickness of a taiko wafer. We investigated the curvature as a function of the stress of the metal layer, considering key design factors such as the substrate region thickness, the thickness of the thin metal film, the step height, and the width of the ring region. By systematically varying the thickness of the central region of the taiko wafer, we explored the curvature as a function of stress induced by thermal load in the linear regime and determined the slopes in the linear region of the curvature vs. stress curves. The aim of this study is to identify regularities and similarities with the Stoney equation and investigate the validity of the analytical approach for the case of a taiko substrate. It results that there is a good agreement between the analytical model of a taiko wafer and the numerical analysis gained by the FEA methods.

Phylostratigraphic analysis is a way to look anew on phylogenetic data in the evolutionary aspect. It allows counting the evolutionary age based on the analysis of genes, their orthologs and finding the last common ancestor. We performed phylostratigraphic analysis of Arabidopsis thaliana genes associated with several types of abiotic stresses (heat, cold, water-related, light, osmotic, salt, and oxidative) determined by the Gene Ontology annotation. Comparison of the distributions of ages of genes associated with stresses of different type has shown the heat stress to involve older genes while the light stress – younger genes. At the same time, all types of stress are characterized by a significantly higher proportion of old genes (common to all eukaryotes) compared to the whole set of A.thaliana genes. This can be explained by the involvement of basic molecular processes in plant cells into the stress response. Reconstruction and graphical analysis of the gene network of the heat stress educed several clusters associated with different response functions. Some of these clusters contain only ancient genes. The results obtained show that the phylostratigraphic analysis reveals the fundamental features of the organization of gene networks and their evolution.

This study analyses the changes in land use in the Sado estuary (West-Central Portugal) based on a multitemporal analysis of cartographic data from the 19th century and remote sensing land use maps from the 21st century, updated by field work. A GIS plotting of land-use evolution is summarized in a quantitative table. The comparison shows the changes in land use, with increasing occupation by human economic activities, including extensive agriculture and forestry, as well as localized urbanization and industrialization. The main elements of the landscape impacted by anthropogenic uses were: i) hydrography - river dams affected the flow dynamics and sedimentary processes in the estuary; ii) vegetation – increasing agriculture and forestry reduced the areas of native vegetation, nowadays mostly occupied by vineyards, pine forests and cork oaks. iii) wetlands - tidal and alluvial plains are being occupied by rice cultivation, aquaculture, industries, and ports; iv) coastal dunes – new developments are occupying large areas of Holocene coastal dunes; v) natural environment – mining and dredging affected some habitats and biodiversity. This analysis is intended to help the territorial organization of present and future economic activities, as well as to reduce environmental and social problems, promoting long-term sustainability of this rapidly evolving region.

The evaluation of spatial planning results, or outcomes, has been rather neglected by scholars and practitioners. The causes of this neglect are linked to the characteristics of the planning systems in use or difficulties in quantifying results. To advance the state of the art of outcome evaluation, this paper focuses on assessing the implementation of national spatial planning objectives in urban landscapes, through the use of an evaluation framework that makes use of spatially explicit information. The framework is built on four dimensions which reflect the main domains of spatial planning: efficient built-up development, conservation of agricultural land, landscape preservation, and human perception. Indicators capable of capturing landscape changes in both time and space are used to verify degree of conformance between adopted objectives and actual development patterns. We make use of spatially explicit data and assess whether and where landscape changes occurred, by integrating the framework into a multi-criteria analysis. In the present study, the framework is tested in two study areas in Switzerland and Romania, and the results are interpreted from the perspective of spatial planning approaches in the two countries. The efficiency and utility of the framework is demonstrated by its ability to provide valuable information facilitating improvement in the performance of planning processes, such as identifying where the implementation of objectives is less effective, and the domains of spatial planning that are affected. Our findings highlight that the distance between objectives and outcomes can be attributed to differences in countries’ spatial planning approaches, particularly regarding landscape preservation and management. Our study provides valuable insights for the integration of time series of spatial data into the evaluation procedure.

The increased number of buildings in urban areas limits the creation of vegetated areas, leading to the search for alternatives to create spaces to promote contact with nature. In this context, green roofs have been increasingly studied. These structures have specific microclimatic condi-tions requiring an accurate study of the most appropriate vegetation to use. This study aims to analyze the long-term viability of vegetation installed on an experimental green roof open-air lab. This analysis was done through images obtained from photographic records and later in-serted into the ImageJ program, to identify species and evaluate the area covered by vegetation. Only a few of the species that were planted in the test beds over the years have persisted to the present, while other species have spontaneously appeared. Also, surveys were used to learn about people's preferences for the vegetation on these test beds. These showed that people favor recognizable plants with plenty of vibrantly colored blossoms. It was feasible to choose the best plants for green roofs in the studied conditions as a result of the analysis, taking into account the ground cover percentage by vegetation, its persistence, and the preferences of the respondents.

Cells produce reactive oxygen species (ROS) as by-products of metabolism, which can give rise to a two-sided effect on the body under balanced and imbalanced oxidant homeostasis conditions. Antioxidant supplements exert their beneficial efficacy in the treatment of metabolic diseases only when the oxidant homeostasis is imbalanced with the over-production of ROS. Over-supplementation of antioxidant(s) can also cause an imbalanced oxidant homeostasis to exert detriments to the induction of metabolic diseases. This commentary raises a concern that prior to precise supplementation of antioxidants, an establishment of oxidant homeostasis status is required in avoiding an imbalanced oxidant homeostasis in vivo. In searching for valid oxidant stress makers, 3-Nitrotyrosine seems to fit in with the selection criteria and its quantification can be correlated with the degree of oxidative stress in vivo.

Islamic banks (IBs) have been criticized as not being genuinely Islamic, and the methods in measuring their performances have been debatable. While the literature on IBs performance has been emerging, such studies precisely assess its recent development remains absent. Therefore, we aim to evaluate the development of scholarly articles that measure IBs’ performances. We employ bibliometric analysis and sample related articles from the Scopus database. We find that the development of IBs performance literature may be understood by 111 peer-reviewed journal articles, 4 conference papers, 1 book, and 1 book series. We analyze these materials based on publication sources, country and institution affiliation, keywords association, and cluster dendrogram. Our model that quantifies the keywords association and cluster dendrogram provides a novelty in assessing IBs performance literature development. Future studies may replicate our model to cluster and identify the keyword associations from the unstructured data sources.

Considering that consumers are more willing to buy products online, companies are increasingly selling remanufactured products online through e-commerce platforms. Notwithstanding the high attention it elicits from researchers and companies, the study about the remanufacturing trading platform is in its infancy. Thus, we investigate 20 remanufacturing trading platforms related nowadays and make a gap analysis among them in terms of: (i) business model, (ii) product display, (iii) delivery products, (iv) quality assurance and after-sales service, (v) product review and star rate and (vi) transaction and payment. On this basis, we analyze features and trends for the development of remanufacturing trading platforms and propose six key applications aimed at filling the identified gaps. The consortium blockchain has the characteristics of security and transparency, high credibility, traceability and unfalsifiability, low cost, and strong scalability, which can provide effective support for the six key applications. Then, we construct the technical framework and the model of a consortium blockchain-supported remanufacturing trading platform. Further, we analyze the coupling mechanism between consortium blockchain and remanufacturing trading platform to explain how the remanufacturing trading platform supported by consortium blockchain achieves development characteristics. This study provides important guidance for the development, construction, and operation management of remanufacturing trading platforms.

La minería es una industria intensiva en energía que requiere una fuente estable de electricidad. Con el aumento de la demanda de minerales y la disminución de las leyes, se espera que la demanda de energía aumente en un 36% para el 2035. Este aumento de la demanda depende del uso de combustibles fósiles ya que la electricidad producida y comprada en las empresas mineras se basan principalmente en el caso de los combustibles fósiles, los costos de los sistemas de almacenamiento de energía solar y eólica han caído a una escala sin precedentes, lo que alienta a las empresas mineras a probar estas tecnologías.Entre los factores que influyen en el uso de energía renovable, se encuentra el beneficio a la comunidad en la etapa de operación y cierre o post-cierre de un proyecto minero, el siguiente factor es el perfil de consumo eléctrico o demanda es importante para el cálculo de su almacenamiento o no, de las energías renovables a utilizar. Como tercer factor está el cálculo del consumo en los procesos. Los rangos de penetración determinarán si es posible su almacenamiento de energía, y si es posible utilizar control híbrido (solar - eólico), para ello es importante el uso de herramientas digitales como el programa Holmer, es una herramienta importante que técnica y económica.El gobierno debe tener una perspectiva que ayude en los temas regulatorios necesarios para impulsar proyectos de energía renovable con diferentes incentivos e intereses según el contexto minero.

We evaluate performance of Isogeometric analysis (IGA) for structural deformation and automobile crash. In automobile crash analysis, ensuring the accuracy of the acceleration, velocity and load in time series as well as the deformation behavior is important. To maintain the aforementioned consistency, accurately reproducing the bending and buckling of structural members is indispensable. In this study, we firstly compute the bending and buckling of structural members using IGA and validate its performance by comparing the results with conventional finite element analysis and experiments. In addition, we utilize IGA for the crash analysis of an automobile body.

The rapid and accurate detection of viruses and the discovery of single nucleotide polymorphisms (SNPs) are crucial for disease management and understanding viral evolution. In this study, a pipeline for virus detection, validation, and SNP discovery from next-generation sequencing (NGS) data is presented. By integrating state-of-the-art bioinformatics tools with artificial intelligence, the pipeline processes raw sequencing data to identify viral sequences with high accuracy and sensitivity. Before aligning the reads to the reference genomes, quality control measures and adapter trimming are performed to ensure the integrity of the data. Unmapped reads are subjected to de novo assembly to reveal novel viral sequences and genetic elements. The effectiveness of the pipeline is demonstrated by the identification of virus sequences, illustrating its potential for the detection of known and emerging pathogens. SNP discovery is performed using a custom Python script that compares the entire population of sequenced viral reads to a reference genome. This approach provides a comprehensive overview of viral genetic diversity and identifies dominant variants and a spectrum of genetic variations. The robustness of the pipeline is confirmed by the recovery of complete viral sequences, which improves our understanding of viral genomics. This study highlights the synergy between traditional bioinformatics techniques and modern approaches, providing a robust tool for analyzing viral genomes and contributing to the broader field of viral genomics.

Urban form is associated with both socio-economic and urban physical properties. This study explores the differences among urban forms in the Seoul Metropolitan Region with a comparison between census-based socioeconomic variables and landscape metrics computed from remotely sensed data. To accomplish this, factor analysis and multi-dimensional scaling were used with the selected variables and metrics. When all of the measures are considered together, four types of cities and towns emerged: 1) exurban-fragmented high growth, 2) exurban-fragmented low growth, 3) compact-extensive urban core and 4) sub-urban compact-high growth. The results indicate that the fusion of knowledge of the physical urban layout and that of socio-economic characteristics is beneficial for a better understanding of urban spatial patterns. However, there remain challenges in delineating each urbanized area and with indicator selection for comparing urban form across cities and towns.

Although suicide is a major public health issue worldwide, we understand little of the onset and development of suicidal behavior. Suicidal behavior is argued to be the end result of the complex interaction between psychological, social and biological factors. Epidemiological studies resulted in a range of risk factors for suicidal behavior, but we do not yet understand how their interaction increases the risk for suicidal behavior. A new approach called network analysis can help us better understand this process as it allows to visualize and quantify complex association between many different symptoms or risk factors. A network analysis of data contain information on suicidal patients can help us understand how risk factors interact and how their interaction is related to suicidal thoughts and behaviour. A network perspective has been successfully applied to the field of depression and psychosis, but not yet to the field of suicidology. In this theoretical article, I will introduce the concept of network analysis to the field of suicide prevention, and offer directions for future applications and studies.

The COVID-19 infections in Pakistan are spreading at an exponential rate and a point may soon be reached where rigorous prevention measures would need to be adopted. Mathematical models can help define the scale of an epidemic and the rate at which an infection can spread in a community. I used ARIMA Model, Diffusion Model, SIRD Model and Prophet Model to forecast the magnitude of the COVID-19 pandemic in Pakistan and compared the numbers with the reported cases on the national database. Results depicts that Pakistan could hit peak number of infectious cases between June 2020 and July, 2020.

In order to reconstruct the origin and pathways of variola virus (VARV) dispersion, we analyzed 47 VARV isolates available in public databases and their SNPs. The mean substitution rate of the whole genomes was 9.41x10-6 (95%HPD:8.5-11.3x10-6) substitutions/site/year. The time of the tree root was estimated to be a mean 68 years (95%HPD:60.5–75.9). The phylogeographical analysis showed that the Far East and India were the most probable locations of the tree root and of the inner nodes, respectively, whereas for the outer nodes it corresponded to the sampling locations. The Bayesian Skyline plot showed that the effective number of infections started to grow exponentially in 1915-1920, peaked in the 1940s, and then decreased to zero. Our results suggests that the VARV major strains circulating between 1940s-1970s probably shared a common ancestor originated in the Far East; subsequently moved to India, which became the center of its dispersion to eastern and southern Africa, and then to central Africa and the Middle East, probably following the movements of people between south-eastern Asia and the other places with a common colonial history. These findings may help to explain the controversial reconstructions of the history of VARV obtained using long- and short- term calibrations.

-- This paper examines the critical role of business analysis in shaping small and medium-sized enterprises’ strategies for better odds of success in the ever-evolving Nigerian economy and within the competitive markets. Business analysis ability, as a knowledge-supporting factor, focuses on understanding consumer needs, planning, data collection, analysis, and presentation to decision-makers. The process begins with strategic planning and meticulous data collection, facilitating a deep understanding of the business and consumer behavior and process potential. Analytical skills unearth the true potential of organizational processes, particularly in product creation, resulting in distinctive and highly valued products. Such products align with theories like the resource-based view or VRIO theory, driving increased sales volume—a key performance metric. By leveraging analytical capabilities, Nigerian SMEs can navigate complex market dynamics, create value-driven businesses, and differentiate themselves from competitors thus increasing the odds of success. This paper sets the stage for further research into the impact of business analysis on organizational success within dynamic market landscapes.

The analysis of drugs is a priority in public health, particularly antibiotics which develop resistance due, among other things, to bad dosages or poor quality of the active substance. In this study, we evaluated eight antibiotics available in health centers in Djibouti through qualitative and quantitative analysis. The tests were based on high-purity reference products. In qualitative analysis by HPLC, only amoxicillin presented two impurity peaks. This observation is found in the dosage of this active ingredient with a value of 83 ±0.6 mg instead of the 500 mg indicated on the label. It will be necessary to diversify the sample’s provenance to seek the origin of this degradation.

Background: This work aimed to undertake a bibliometric analysis of the Rubella virus. Medical studies were conducted between 2000 and 2022 to discover trends, dynamics, and research outputs in the industry. Methods:A bibliometric study was performed using R software to determine research characteristics indexed worldwide and published in Rubella research in medical studies. The Rubella virus was chosen as the subject in the PUBMED database, and 374 papers from the previous two decades were reviewed. Results: There was an increase in the number of publications after 2003. The United States was the most essential countryamong all which had the most contributions on Rubella Virus. Conclusion:Rubella research has increased in the medical profession over the previous decade, with the United States leading to publications in this field.

The Apetala2/ethylene response factor superfamily refers to a group of transcription factors that share a conserved AP2 DNA binding domain. These factors have been found to have different roles in plant responses to both biotic and abiotic stresses. Samples of hexaploid wheat, tetraploid pasta (or durum wheat), and diploid wheat progenitors were selected. The 29 dehydration-responsive element binding transcription factors in these samples were downloaded from NCBI GenBank for six different countries: Iran, China, Italy, France, Afghanistan, and Azerbaijan. The AP2 domain sequences were identified from the dehydration-responsive element binding transcription factors using PROSITE, ProDom, and SMART software. Next, all sequences were aligned using Multalin and Jalview software. The aligned sequences were then analyzed to identify amino acid locations, types, and frequencies. The multiple alignments showed that approximately 76% of the amino acid residues in the AP2 domains are conserved. According to the amino acid analysis, alanine, serine, and glutamic acid are the most abundant amino acids found in three motifs. The performed phylogenetic analysis illustrates the role of geographical effects on the transcription factor sequences of bread wheat in the Middle East. Significant differences were found between Iranian and Chinese transcription factor sequences. Moreover, genetic variation was observed in the transcription factors of Italian sequences found in pasta and wheat progenitors. Motif structures play a critical role in the domain organization of wheat proteins to enhance the characteristics of assorted metabolic pathways. The structure of the AP2 domain was analyzed by several programs, I-TASSER for instance, to identify the α-helix, β-sheets, and the regions of some significant amino acids in the 3-D model.

This paper constitutes a comprehensive literature review within the field of cultural tourism, with a particular focus on the concept of the cultural route as a tourist-cultural product. Within this framework, the paper offers an overview of contemporary technological challenges, concerns, and limitations. It thoroughly explores cutting-edge technologies pertaining to the promotion of cultural heritage, both in general and in the specific context of realizing the concept of the cultural route, a tourist-cultural service enriched by the utilization of new media. Additionally, it extensively references the latest techniques and models for enhancing the user experience of digital cultural tourism products. Moreover, the paper showcases existing digital platforms and tools that encapsulate and emphasize the notion of cultural tourism. It assesses the respective methodologies, technologies, and techniques employed in each case, accompanied by illustrative instances of their applications.

This literature review focuses on the development of an ontology for public policy problems in Ethiopia. The study aims to provide a structured representation of concepts, relationships, and knowledge specific to the Ethiopian policy context. The research follows a systematic ontology development process that incorporates domain-specific knowledge and stakeholder involvement.The review begins by describing the steps involved in the ontology development process, including problem identification and scoping, requirement analysis, ontology modeling, and stakeholder involvement. It emphasizes the importance of engaging policymakers, subject matter experts, and researchers throughout the process to validate the ontology and ensure its relevance and effectiveness in addressing Ethiopian policy problems.The application of the developed ontology to specific policy problems is then discussed. Examples include agricultural policy analysis, healthcare policy evaluation, and education policy planning. The review highlights how the ontology can support policy analysis, decision-making, and evaluation by capturing relevant concepts, simulating policy scenarios, and assessing policy impacts.Furthermore, the review identifies potential challenges and limitations in the ontology development process, such as data availability, expert knowledge engagement, and the evolving policy landscape. These challenges need to be addressed to ensure the ontology's accuracy and usability in addressing Ethiopian policy problems.Finally, the review provides suggestions for further research and improvement, such as integrating the ontology with data sources, fostering collaborative ontology development, exploring semantic reasoning and inferencing techniques, and promoting interoperability and standardization. These suggestions aim to enhance the ontology's capabilities and its contribution to the field of ontology development for public policy problems.In conclusion, the development of an ontology for public policy problems in Ethiopia offers a valuable tool for policymakers, researchers, and stakeholders to understand, analyze, and address complex policy challenges. The ontology's relevance and applicability to the Ethiopian context, stakeholder involvement, and support for policy analysis make it a significant contribution to the field of ontology development for public policy.

(1) Background: Surgical phases form the basic building blocks for surgical skill assessment, feedback and teaching. Phase duration itself and its correlation to clinical parameters has not yet been investigated. Novel commercial platforms provide phase indications but have not been assessed for accuracy yet. (2) Methods: We assess 100 robot-assisted partial nephrectomy videos for phase duration based on previously defined proficiency metrics. We develop an annotation framework and subsequently compare our annotations to an existing commercial solution (Touch Surgery, Medtronic™). We subsequently explore clinical correlations between phase durations and peri-operative parameters. (3) Results: Objective and uniform phase assessment requires precise definitions derived from an iterative revision process. Comparison to a commercial solution shows large differences in definitions across phases. BMI and duration of renal tumor identification correlate positively, as well as tumor complexity and both tumor excision and renorraphy duration. (4) Conclusions: Surgical phase duration can be correlated with certain clinical outcomes. Further research should investigate if retrieved correlations are also clinically meaningful. This requires increasing dataset sizes and facilitation through intelligent computer vision algorithms. Commercial platforms can facilitate this dataset expansion and help unlock the full potential, provided the disclosure of phase annotation details.

In many countries, governments have implemented non-pharmaceutical techniques to limit COVID-19 transmission. Restricting human mobility is one of the most common interventions, including lockdown, travel restrictions, working from home, etc. However, due to the strong transmission ability of the virus variants, further rounds of interventions, including a strict lockdown, are not considered as effective as expected. The paper aims to understand how the lockdown policy and pandemics changed human mobility in the real scenario. Here we focus on understanding the mobility changes caused by compliance with restrictions and risk perceptions, using the mobility index from the Google report during three strict lockdown periods in Leeds, the largest city in the county of West Yorkshire, England from March 2020 to March 2021. The research proposed the time-varying z-scores and Principal Component Analysis (PCA) to simulate how local people dynamically process and perceive health risk based on multi-dimensional daily COVID-19 reports first. Further modelling highlights exponentially increasing policy non-compliance through the duration of lockdown, probably attributable to factors such as mental anxiety and economic pressures. Finally, the proposed nonlinear regression model examines the mobility changes caused by the population's dynamic risk perceptions and lockdown duration. The case study at Leeds fits data well and shows that the third lockdown policy took effect much slower than the first. At the same time, the negative impact of the epidemic on population mobility decayed 40% in the third lockdown period in contrast with the first lockdown. The risk perception estimation methods could reflect that the local population became increasingly accustomed to the COVID-19 situation, and local people rationally evaluated the risks of COVID in the third lockdown period. The results prove that simulated risk perceptions and policy decay could explain urban mobility behaviour during the mobility well during lockdown periods, which could be a reference for future decision-making processes.

Shared micromobility has gained significant attention in the field of transportation engineering in recent years as an environmentally friendly, convenient, and easily accessible transportation mode. Like other medium-sized cities, Birmingham, Alabama implemented a shared micromobility pilot program in 2021 that captured the attention of local travelers. This study examined shared e-scooter usage and associated travel patterns in Birmingham using 2021-2022 field data. From these data, ArcGIS maps were used to showcase trip origins and destinations. To gain a further understanding of e-scooter travel patterns in the study area, zip code and block group densities were calculated. Additionally, a negative binomial regression model was constructed to identify determinants of shared e-scooter trips. The analysis results showed that the usage of shared e-scooters was the highest during the nighttime, on weekends, and in the fall season. Furthermore, the research findings indicated that shared e-scooters experienced their highest utilization rates in areas with a higher proportion of educated and higher-income individuals. These findings suggest that travelers’ mode choice related to the use of micromobility modes is influenced by environmental and demographic factors. Overall, this case study offers valuable contributions to the understanding of the role of shared e-scooters in Birmingham's transportation landscape and can guide transportation authorities in other medium-sized cities in their efforts to plan for micromobility options.

The Bay of Espirito Santo is located in the Espírito Santo State, in the eastern part of Brazil. It is surrounded by the city of Vitoria on one side and by the Atlantic Ocean on the other. Superficial sediments of Espirito Santo Bay were analyzed at 12 (western shallow silt sediments) + 8 (eastern sandy sediments and relatively deep sampling stations) = 20 uniformly distributed sampling points where geochemical analysis was performed. Nineteen elements were analyzed: Mo, Cu, Pb, Zn, Ag, Ni, Mn, Fe, As, U, Th, Sr, Cd, Sb, Bi, V, Cr, Ba, and Al. This selection was made based on the most representative heavy metals present in this area and according to the results obtained from the geochemical analysis. Their concentrations were compared with metal contamination benchmarks like Screening Quick Reference Tables (SQuiRTs), Effects Range-Low (ERLs) and Effects Range-Median (ERMs), TELs (Threshold Effects Levels), PELs (Probable Effects Levels), ERM (Effects range median), and AETs (Apparent Effects Thresholds). Results indicate that there is no particular pollution condition able to alter the condition of any part of this water body. The Authors conclude that the Espirito Santo Bay is only moderately polluted and some elements are virtually absent.

The Bay of Espirito Santo is located in the Espírito Santo State, in the eastern part of Brazil. It is surrounded by the city of Vitoria on one side and by the Atlantic Ocean on the other. Superficial sediments of Espirito Santo Bay were analyzed at 12 (western shallow silt sediments) + 8 (eastern sandy sediments and relatively deep sampling stations) = 20 uniformly distributed sampling points where geochemical analysis was performed. Nineteen elements were analyzed: Mo, Cu, Pb, Zn, Ag, Ni, Mn, Fe, As, U, Th, Sr, Cd, Sb, Bi, V, Cr, Ba, and Al. This selection was made based on the most representative heavy metals present in this area and according to the results obtained from the geochemical analysis. Their concentrations were compared with metal contamination benchmarks like Screening Quick Reference Tables (SQuiRTs), Effects Range-Low (ERLs) and Effects Range-Median (ERMs), TELs (Threshold Effects Levels), PELs (Probable Effects Levels), ERM (Effects range median), and AETs (Apparent Effects Thresholds). Results indicate that there is no particular pollution condition able to alter the condition of any part of this water body. The Authors conclude that the Espirito Santo Bay is only moderately polluted and some elements are virtually absent.

The oral route remains one of the most popular and important routes of administration that warrants the development of advanced drug delivery systems such as the polymeric nanoparticles capable of enhancing the absorption and bioavailability of the used drugs. In this work, systematic reviewing through several databases followed by a meta-analysis study were utilized in order to navigate the published studies and reach literature-based evidence about the capability of polymeric nanoparticulate systems of augmenting the absorption and the bioavailability of the orally administered drugs. The pharmacokinetic parameter; area under the curve (AUC) was utilized as the “effect” of the meta-analysis study. The meta-analysis study demonstrated the significant increase AUC as compared to the conventional formulations. Furthermore, comparing the synthetic polymeric nanoparticles versus the naturally-based counterparts, as subgroups of the meta-analysis, revealed no significant differences.

Credit business is a vital part of the bank's core business, which has an extremely important impact on the bank's income and development. In the operation of credit business, credit risk assessment is particularly crucial, and accurate risk assessment can minimize risks while maximizing the bank's returns. We propose a method to optimize credit risk assessment using machine learning techniques. In this work, we employ a random forest machine learning model to process and analyze large amounts of loan application data. By using correlation analysis, information enrichment, etc., the characteristics that have the most impact on credit risk assessment are screened. Subsequently, the model was constructed using a random forest algorithm. Random forests improve the generalization ability and accuracy of the model by building multiple decision trees and introducing randomness between these trees. In the experimental analysis part, we compare the performance of various models on the German credit dataset, and the results show that the deep learning model outperforms the traditional machine learning model in most indicators, verifying the effectiveness of our method.

The paper presents a case study and a model for condition monitoring of Diesel engines’ oil of urban buses, through the accompaniment of the evolution of its degradation, with the objective to implement a predictive maintenance policy. Along time, because the usage, there is some decay in the lubricant properties. However, in normal functioning conditions, the lubricants properties, at the time the manufacturers recommend its changing, regardless of they are within the safety limits. Then, based on the accompaniment of the lubricants’ oil condition, the intervals of oil replacement can be enlarged what implies the availability increasing and the corresponding production increasing of the equipment. The model presented in this paper shows its potential to be spread to other types of equipment and organisations that want can implement similar maintenance policies, to achieve the best availability based on the real equipment health conditioning conditions

We revisit the Susceptible-Infectious-Recovered/Removed (SIR) model which is one of the simplest compartmental models. Many epidemological models are derivatives of this basic form. While an analytic solution to the SIR model is known in parametric form for the case of a time-independent infection rate, we derive an analytic solution for the more general case of a time-dependent infection rate, that is not limited to a certain range of parameter values. Our approach allows us to derive several exact analytic results characterizing all quantities, and moreover explicit, non-parametric, and accurate analytic approximants for the solution of the SIR model for time-independent infection rates. We relate all parameters of the SIR model to a measurable, usually reported quantity, namely the cumulated number of infected population and its first and second derivatives at an initial time t=0, where data is assumed to be available. We address the question on how well the differential rate of infections is captured by the Gauss model (GM). To this end we calculate the peak height, width, and position of the bell-shaped rate analytically. We find that the SIR is captured by the GM within a range of times, which we discuss in detail. We prove that the SIR model exhibits an asymptotic behavior at large times that is different from the logistic model, while the difference between the two models still decreases with increasing reproduction factor. This part A of our work treats the original SIR model to hold at all times, while this assumption will be released in part B. Releasing this assumption allows to formulate initial conditions incompatible with the original SIR model.

In recent years, with the increase in maritime trade, the necessity of increasing the capacities of the ports has emerged. However, while it is planned to increase the capacities of the ports, it is important that the port continues to operate at the same time. In this respect, the old port structures should not be damaged during the capacity increase. In this study, the strengthening of a port in Guinea is discussed as a case study. In the study, the existing quay wall was evaluated, and geotechnical and structural alternatives of the new structure to be built for capacity increase were evaluated. A combined system was designed as a pile foundation and a reinforced foundation with plastic piles so as not to damage the existing quay wall. The pile capacities obtained as a result of the analyses were verified by loading tests.

The primary objective of this research was to assess the energy consumption of the gas treatment units at Bonny NLNG Refinery, the first Gas Refinery in Rivers State, Nigeria, while utilizing semi-lean amine. To achieve this goal, a simulation of the units was conducted using the advanced software package Aspen Hysys (V.8.3). The simulation was designed to accurately represent the dynamic behavior of the refinery's gas treatment units, allowing for a comprehensive analysis of their energy usage. The research aimed to quantify the energy consumption of the gas treatment units and identify opportunities for energy optimization. By utilizing semi-lean amine, which is known to improve energy efficiency, the study sought to evaluate the potential energy savings that could be achieved in the refinery's operations. The simulation model incorporated the specific design and operational parameters of the gas treatment units at Bonny NLNG Refinery, including the gas flow rate, lean amine concentration, absorber pressure, stripping temperature, amine circulation rate, and acid gas removal efficiency. By considering these parameters, the simulation accurately represented the dynamic behavior of the gas treatment units, enabling a detailed analysis of their energy consumption. Through the simulation, various scenarios and operational conditions were evaluated to determine the optimal set of parameters that minimized energy consumption. The research also examined the trade-offs between energy consumption, acid gas removal efficiency, and other performance indicators, such as amine circulation rate and regeneration efficiency. The findings of this research have significant implications for the energy efficiency and sustainability of gas treatment operations at Bonny NLNG Refinery. By identifying opportunities for energy optimization and providing recommendations for the utilization of semi-lean amine, the study contributes to the development of more efficient and environmentally friendly gas treatment processes. Overall, this research combines advanced simulation techniques with a comprehensive analysis of energy consumption to provide valuable insights into the energy efficiency of gas treatment units at Bonny NLNG Refinery, enabling informed decision-making and potential improvements in energy utilization. By utilizing the percentage-based unit simulation approach, a detailed examination of the energy consumption patterns was obtained. This analysis provides valuable insights into the operational efficiency and determination of potential energy-saving opportunities within the gas treatment units. This study specifically focuses on the integration of an absorption column split stream (stream flow) and a flash unit as a potential means to reduce the energy consumption of gas treatment devices. The integration of these units aims to optimize the overall energy efficiency of the gas treatment process by recovering and utilizing waste heat and reducing energy losses. The absorption column split stream allows for the diversion of a portion of the gas stream to a flash unit before entering the absorber. The flash unit operates at a lower pressure, which facilitates the release of entrained hydrocarbons and reduces the overall energy requirements for gas treatment. By separating and recovering the hydrocarbons in the flash unit, energy losses associated with their absorption and subsequent regeneration are minimized. Through the simulation, the study analyzes the energy consumption patterns of the gas treatment units with and without the integration of the absorption column split stream and flash unit. Comparative assessments are conducted to evaluate the energy savings and overall operational efficiency achieved through this integration. The findings of this research will provide valuable insights into the potential energy-saving opportunities offered by the integration of the absorption column split stream and flash unit in gas treatment devices. It will help refine the design and operation of gas treatment units, enabling more energy-efficient processes in the gas refining industry. By optimizing energy consumption in gas treatment units, the study contributes to the industry's goals of reducing greenhouse gas emissions and improving sustainability. The integration of the absorption column split stream and flash unit offers a promising approach to enhance energy efficiency, reduce operational costs, and minimize environmental impact. Overall, this research underscores the importance of exploring innovative solutions, such as the integration of different process units, to achieve energy savings in gas treatment operations. Through a comprehensive analysis of energy consumption patterns, this study aims to provide practical recommendations for optimizing energy efficiency in gas treatment units, fostering a more sustainable and efficient gas refining industry.The research specifically explores the impact of integrating the absorption column split stream and flash unit when dealing with sour gas streams containing carbon dioxide concentrations of less than mole ℅, while utilizing MDEA fluid as the solvent. Through comprehensive analysis and simulation using advanced software tools, the study demonstrates that by incorporating the absorption column split stream and flash unit, a significant reduction in device energy consumption of up to 10% can be achieved. The integration of the absorption column split stream and flash unit offers promising opportunities to enhance the energy efficiency of gas treatment devices. By diverting a portion of the gas stream to the flash unit, the separation of hydrocarbons and the subsequent release of entrained hydrocarbons at lower pressure significantly reduce the overall energy requirements for gas treatment. The comprehensive analysis and simulation conducted in the research provide concrete evidence of the energy-saving potential of this integration. By quantifying the energy consumption patterns and comparing scenarios with and without integration, the study establishes the effectiveness of the approach and its impact on operational efficiency. The findings of the research highlight the importance of considering the specific gas composition and utilizing appropriate solvents, such as MDEA, for optimizing energy efficiency. The integration of the absorption column split stream and flash unit not only reduces energy consumption but also offers the potential for cost savings and environmental benefits. Overall, the research demonstrates that by incorporating the absorption column split stream

In a recent study, the PD-1 inhibitor has been widely used in clinical trials and shown to improve various cancers. However, PD-1/PD-L1 inhibitors showed a low response rate and showed to be effective for a small number of cancer patients. Thus, it is important to identify key genes, which can enhance the PD-1/PD-L1 response for promoting immunotherapy. Here, we used ssGSEA and unsupervised clustering analysis to identify three clusters to show different immune cell infiltration status, prognosis, and biological action. The cluster C showed a better survival rate, high immune cells infiltration, and immunotherapy effect enriched in a variety of immune active pathways, including T and B cell signal receptors. Besides, it showed more immune subtypes C2 and C3. Further, we used WGCNA analysis to confirm the cluster C correlated genes. The red module highly correlated with cluster C for 111 genes which were enriched in a variety of immune-related pathways. To pick candidate genes in SD/PD and CR/PR patients, we used the Least Absolute Shrinkage and SVM-RFE algorithms. In conclusion, our LASSO analysis and SVM-RFE based research identified targets with better prognosis, activated immune-related pathways, and better immunotherapy. The KLRC3 was identified as the key gene which can efficiently respond to immunotherapy with greater efficacy and better prognosis.

B4GALNT2 is a vital candidate gene that affects the growth traits litter size in and growth traits of sheep, but whether it has the same function in goats remains to be further investigated. In this study, we utilized 348 Nanjiang Yellow goats as experimental subjects, conducted a whole exon, and the conserved the non-coding region SNP scanning of the B4GALNT2 gene. Our results revealed the presence of a synonymous mutation, rs672215506, within the exon of the B4GALNT2 gene in the Nanjiang Yellow goat population. This mutation was found to be associated with reduced mRNA stability of the B4GALNT2 gene. The results of SNPs detection of conserved non-coding region of B4GALNT2 gene showed that there were five potential regulatory SNPs in the Nanjiang Yellow goat population, except for rs66095343, the ~500 bp fragments of four SNPs (rs649127714, rs649573228, rs652899012 and rs639183528) could significantly increase luciferase activity both in goat skeletal muscle cells and 293T cells . Genetic diversity indexes indicated low or intermediate levels for all six SNPs analyzed, each conforming to Hardy-Weinberg equilibrium regarding genotypic frequencies. Association analysis indicated that rs660965343, rs649127714 and rs649573228 were significantly correlated with growth traits in the later stage of growth and development of Nanjiang Yellow goat. The haplotype combinations of H2H3 and H2H2 had higher body weight and greater body size; moreover, H2H2 haplotype combinations were significantly correlated with the litter size of Nanjiang Yellow goat. The results of our study demonstrate the potential utility of the B4GALNT2 gene as a functional genetic marker in breeding programs for Nanjiang Yellow goats.

The underperforming state of agricultural sector especially in Sub Saharan Africa, Nigeria inclusive is largely due to gender inequities in opportunities which undermine the sustainable and inclusive agricultural development. Agricultural value chain development requires equity in opportunities among men and women along the value chain, and this can only be done through interventions recommended by gender equity studies. The study analyzed gender equity opportunities, and youth engagement in rice value chains in southeast Nigeria. The multistage sampling technique was used in selecting the sample. The sample size consists of 476 youth rice value chain actors randomly selected from 48 villages across three states in South-East Nigeria. The data were analyzed using Modified Gender Equity Index (MGEI), and value addition models. The results from MGEI show that the level of gender equity opportunities for youth rice producers, processors and marketers were -0.21, -0.21 and -0.04 respectively, indicating inequity against the female youth. The overall value-added per ton by the male youth actors was ₦52,281 and ₦52,229 for female youth actors. The share of the value-added by male youth producers, processors and marketers were 51.65%, 49.41% and 47.78% while the share for female youth were 48.38%, 50.59% and 52.22%, respectively. The major constraints to youth engagement in rice value chain include lack of capital to start up, lack of access to credit, drought, lack of access to better technology, high cost of hiring machines, lack of technical skills, and stressful nature of rice value chain. It was recommended that Policies and interventions that ensure equal access to resources, opportunities, and decision-making power for both male and female youth actors should be implemented through targeted training programmes, awareness campaigns and capacity-building initiatives that promote gender equality.

(1) Background: Neglected tropical diseases (NTDs) have been overlooked on the global health agenda and in the priorities of national systems in low- and middle-income countries (LMICs). In 2012, the Sustainable Development Goals (SDGs) were created to ensure healthy lives and promoting well-being for all. This roadmap set out to accelerate work to overcome the global impact of NTDs. Almost a decade has passed since NTDs were re-launched as a global priority. Investment in research and development, as well as the production of scientific literature on NTDs, is expected to have increased significantly. (2) Methods: A bibliometric analysis of the scientific production of Latin America and the Caribbean (LAC) was carried out in relation to 19 endemic NTDs. These data were compared with the scientific production in malaria, tuberculosis and HIV / AIDS. The database available from Thomson Reuters Web of Science (WoS) was used. In addition, the average annual growth percentage was calculated for each disease. (3) Results: In the last decade, the NTDs with the highest number of publications in the world were dengue and leishmaniasis. The United States was the most prolific country in the world in 15 out of 19 NTDs analyzed. In the LAC region, Brazil was the largest contributor for 16 of the 19 NTDs analyzed. Arboviral diseases showed the highest average annual growth. The number of publications for malaria, tuberculosis and HIV /AIDS was considerably higher than for NTDs. The contribution of most LAC countries, especially those considered as LMICs, is inadequate and does not reflect the relevance of NTDs for the public health of the population. (4) Conclusion: This is the first bibliometric analysis to assess the trend of scientific documents on endemic NTDs in LAC. Our results could be used by decision makers both to strengthen investment policies in research and development in NTDs.

Identifying ambient noise-based (ANb) signatures of streams can help in the estimation of their erosive potential (EP) that promotes reverie landslides and soil losses in the fluvial valleys. This is particularly imperative on flooding or rainy days, leading to stronger erosion-prone conditions (colluvium and boulders) of the valley beds inferred from georadar attribute analysis. Developing such research direction can benefit the local communities, as is the case with the Cerrado region of Brazil, where these phenomena have high destructive potential with social, economic, and climatic implications. For the present study, a seasonal stream in the Federal District of Brazil was investigated by ANb monitoring supported by Ground Penetration Radar (GPR) for site characterization. The ANb monitoring was conducted (at a safe distance) with a seismometer over several durations of dry and rainy conditions. The power spectral density (PSDs) was computed as a function of several variables, including weather conditions (rainfall, wind speed, and pressure), time-frequency spectrograms, and ambient noise displacement root mean square (RMS). This analysis also considered the single station horizontal-to-vertical spectral ratio (HVSR), where rain, wind, pressure, river flow and anthropogenic signatures were evident (at selective frequency ranges). Multi-peaks that emerged on the HVSR curve were further analyzed to identify amplitude and frequency changes, and the three peaks shift on average to a lower position during the rainy period. The GPR amplitude and waveform variation features were attributed to the stratigraphy (i.e., the boundary between valid and invalid regions and coherence value) of the floodplain and regions susceptible to erosion (erosion-prone lithological spots). This approach provides the basis for non-destructive monitoring tools enabling the detection of 'seismic signatures' and weak spots of the fluvial channels for improving environmental management.

53% of adults in the US acknowledge racial bias as a significant issue, 23% of Asian adults experience cultural and ethnic bias, and more than 60% conceal their cultural heritage after racial abuse. AI models like ChatGPT and Google Bard, trained on historically biased data, inadvertently amplify racial and ethnic bias and stereotypes. This paper addresses the issue of racial bias in AI models using scientific, evidence-based analysis and auditing processes to identify biased responses from AI models and develop a mitigation tool. The methodology involves creating a comprehensive database of racially biased questions, terms, and phrases from thousands of legal cases, Wikipedia, and surveys, and then testing them on AI Models and analyzing the responses through sentiment analysis and human evaluation, and eventually creation of an 'AI-BiasAudit,' tool having a racial-ethnic database for social science researchers and AI developers to identify and prevent racial bias in AI models.

Lightning strike can cause a considerable damage in aircraft parts made from semiconducting materials such as Carbon Fiber Reinforced Plastics (CFRPs). Therefore, in recent years, the lightning strike phenomenon has attracted the interest of the academic community and the aircraft industry. Until now, the problem has been addressed mainly experimentally, while the reported numerical works are very limited. In the present work, a coupled electro-thermal FE model has been developed using the ANSYS commercial FE code to simulate the lightning strike damage in unidirectional CFRP laminates due to the Joule heat flux phenomenon. The model is based on the SOLID69 thermoelectric element and applies a non-linear, time-transient analysis. The main input to the model is the thermal-electrical properties of the composite material which vary with temperature. Using the model, a parametric study on the effect of mesh density and peak intensity on the thermal damage has been performed. Three electrical lightning strikes of low (10 kA), medium (30 kA) and high peak intensity (40 kA) have been applied according to the SAE ARP 5412 standard. The electro-thermal model has been validated against a numerical model from the literature. The numerical results reveal that the increase of peak intensity leads to the increase of the area and penetration depth of matrix thermal damage (pyrolysis) as well as to the increase of the area of fiber damage (deterioration and ablation). Through progressive damage modeling, the residual tensile strength of the CFRP plate after being subjected to lightning strike of different peak intensity has been predicted. Lightning strike initial damage has been simulated by translating the thermal field into degradation of elastic properties of the lamina. The results show an increase in the accumulated matrix damage and a decrease of tensile strength due to the initial lightning strike damage. For the maximum peak intensity of 40 kA, a decrease in tensile strength of 4.8% has been predicted

We have used Mass Multivariate Method on structural, resting state and task related fMRI data from two groups of patients with schizophrenia and depression, respectively, in order to define several regions of significant relevance to the differential diagnosis between those conditions. The regions included the left Planum polare, Left opercular part of the inferior frontal gyrus (OpIFG), Medial orbital gyrus (MOrG), Posterior Insula (PIns), and Parahippocampal gyrus (PHG). This study delivers evidence that multimodal neuroimaging approach can potentially enhance the validity of psychiatric diagnosis. Either structural, or resting state or task related functional MRI modality cannot provide independent biomarkers. Further studies need to consider and implement a model of incremental validity to combine clinical measures with different neuroimaging modalities to discriminate depressive disorders from schizophrenia. Biological signatures of disease on the level of neuroimaging are more likely to underpin broader nosological entities in psychiatry.

Variable-Angle Tow (VAT) laminates can improve straight fiber composites mechanical properties thanks to the application of curvilinear fibers. This characteristic allows to achieve ambitious objectives for design and performance purposes. Nevertheless, the wider design space and the higher number of parameters result in a more complex structural problem. Among the various approaches that have been used for VATs study, Carrera’s Unified Formulation (CUF) allows to obtain multiple theories within the same framework, guaranteeing a good compromise between the results accuracy and the computational cost. In this article, the linear buckling behavior of VAT laminates is analyzed through the extension of CUF 2D plate models within the Reissner’s Mixed Variational Theorem (RMVT). Results show that RMVT can better approximate the prebuckling non-uniform stress field of the plate when compared to standard approaches, thus improving the prediction of the linear buckling loads of VAT composites.

The field of financial literacy is intricate and developing. This systematic review of the literature provides a thorough overview of financial literacy. It examines the sample of 3182 papers of the period 1990 to 2023 from different databases such as Scopus, Web of Science, IEEE, Science Direct, and JSTOR and identifies important publications, knowledge gaps, and rising themes. The four major topics that emerged are the degree of financial literacy among various groups of people, gender disparity in financial literacy, the influence of financial literacy on financial behavior and planning, and the impact of financial education on day-to-day decisions. Groups with lower levels of financial literacy include adults, women, people in the lower-income band, rural people, etc. Financial planning and financial behavior are positively associated with financial literacy. Financial literacy could be enhanced with financial education; however, output depends upon program design and experimental group. The review also discusses financial literacy in the context of gender disparity, including its definition, difficulties encountered, and possible solutions. This systematic study will help researchers, practitioners, and policymakers by providing insightful information on financial literacy and its ramifications.

Despite soccer popularity, comparatively little scientific information is available concerning the assessment of youth players’ physiological characteristics. The use of medical software integrating wearable sensors to provide accurate and objective data is necessary. In the present study, the objective assessment of physical performance of 128 adolescent soccer players at two timepoints (pre-season and end-season) has been performed. Participants completed a comprehensive test battery including stability, countermovement jumps (CMJ), plyometric jumps (PJ), agility, and quick feet tests. A single Inertial Measurement Unit (IMU) sensor provided quantitative data on various performance metrics. Principal Component Analysis (PCA) reduced the dataset to four principal components (PCs) explaining over 80% of the variance: power (PC1), balance (PC2), speed/agility (PC3), and stiffness (PC4). Paired samples t-test between the two timepoints showed no significant differences in the PCs between the two timepoints, indicating that the training program did not significantly alter the assessed physical attributes. However, subtle individual changes may still inform personalized training adjustments. The study highlights the importance of continuous monitoring and individualized training strategies to optimize athlete performance and reduce injury risk.

There is a growing need to implement modern technologies, such as digital twinning, to improve the efficiency of transport fleet maintenance processes and maintain the company's operational capacity at the required level. Therefore, the paper reviews the existing literature to present an up-to-date and content-relevant analysis in this field. The proposed methodology is a systematic literature review using the Primo multi-search tool following Preferred Reporting Items for Systematic Reviews and Meta-Analyzes (PRISMA) guidelines. The main inclusion criteria included the publication dates (studies published from 2012–2024) and studies published in English. This resulted in the selection of 201 of the most relevant papers in the area of investigation. Finally, selected articles in this review were categorized into seven groups: a) air transportation, b) railway transportation, c) land transportation (road), d) in-house logistics, e) water and intermodal transportation, f) supply chain operation, and g) other applications. One of the main advantages of the study is that the results are obtained from different scientific sources/databases thanks to using the multi-search tool. Moreover, a bibliometric analysis of the selected papers was performed. The results have led the authors to specify the main research problems and trends related to the analyzed area and to identify the main research gaps for future investigation from academic and engineering perspectives. In addition, based on the review results, a framework for DT in transportation system maintenance was developed. The study ends with conclusions and future research directions.

In contemporary times, the landscape of malware analysis has advanced into an era of sophisticated threat detection. Today's malware sandboxes not only conduct rudimentary analyses but have evolved to incorporate cutting-edge artificial intelligence and machine learning capabilities. These advancements empower them to discern subtle anomalies and recognize emerging threats with a heightened level of accuracy. Moreover, malware sandboxes have adeptly adapted to counteract evasion tactics, creating a more realistic and challenging environment for malicious entities attempting to detect and evade analysis. This paper delves into the maturation of malware sandbox technology, tracing its progression from basic analysis to the intricate realm of advanced threat hunting. At the core of this evolution is the instrumental role played by malware sandboxes in providing a secure and dynamic environment for the in-depth examination of malicious code, contributing significantly to the ongoing battle against evolving cyber threats. In addressing the ongoing challenges of evasive malware detection, the focus lies on advancing detection mechanisms, leveraging machine learning models, and evolving malware sandboxes to create adaptive environments. Future efforts should prioritize the creation of comprehensive datasets, distinguish between legitimate and malicious evasion techniques, enhance detection of unknown tactics, optimize execution environments, and enable adaptability to zero-day malware through efficient learning mechanisms, thereby fortifying cybersecurity defences against emerging threats.

The circular economy is based on maintaining a circular flow of resources. Policymakers face difficulties in balancing national security and circular economy aspects in the field of mineral resources policy. With a uniquely expanded input-output table, this study estimates the final destination of several critical minerals (lithium, cobalt, yttrium, lanthanum, cerium, neodymium and dysprosium) and base metals (iron, copper and aluminum) in the Japanese economy for 2015. Our model shows quite a good similarity between the estimated composition and the actual data of products. The results reveal a detailed distribution of critical minerals and indicate prioritized implementation for creating and maintaining a circular flow of critical minerals. Developed decision flow guidance provides a comprehensive approach to national security and circular economy aspects for policymakers. For further actions, inclusive indicator development is required for policymakers to support the determination of implementation possibilities from social and technological aspects.

Wind loads have become one of the key influence factors for the running safety of vehicles and comfort of passengers. Investigation on the wind speed spectrum characteristics of a moving vehicle under turbulent crosswinds is of great influence. Expressions of the wind speed spectrum of a moving vehicle was obtained from the von Kármán spectrum based on Taylor’s frozen flow hypothesis. The influence factors, including the ratio of the vehicle speed to the wind speed and the wind yaw angle from 15° to 175°, were analyzed. The maximum value of the wind speed spectrum and the corresponding frequency were studied as well. The results show that the maximum values of the wind speed spectrum of the moving vehicle were larger than those of the static vehicle. The maximum value of the wind speed spectrum corresponding to the moving vehicle first increased and then decreased as the wind yaw angle increased. Some of the frequencies corresponding to the longitudinal wind speed spectrum values of the moving vehicles were smaller than those of the static vehicle. For moving vehicles, the frequency values corresponding to the maximum values of the longitudinal wind speed spectrum first increased and then decreased as the ratio of the vehicle speed to the wind speed and the wind yaw angle increased.

Reliable and robust control of power converters is a key issue in the performance of numerous technological devices. In this paper we show a design technique for the control of a DC-DC buck converter with a switching technique that guarantees not only good performance but also global stability. We show that making use of the contraction theorem in the Jordan canonical form of the buck converter, it is possible to find a switching surface that guarantees stability but it is incapable of rejecting load perturbations. To overcome this, we expand the system to include the dynamics of the voltage error and we demonstrate that the same design procedure is not only able to stabilize the system to the desired operation point but also to reject load, input voltage and reference voltage perturbations.

The operating theatre represents a key contributor to healthcare-derived emissions. Here, we outline the carbon footprint of a lumbar microdiscectomy at our regional unit in Greater Manchester, with the use of AI technology. In doing so, we aim to define the extent of the environmental impact and identify carbon hotspots for sustainable change. Our unit of analysis covered the start of the patient journey into hospital through to the final outpatient appointment. Publicly available and locally sourced data was used. An inventory analysis of two lumbar microdiscectomies was conducted. Each item was categorised reconciled against our AI-powered ‘CO2 analysis’ database. Kilograms of carbon dioxide equivalent (kg CO2e) was chosen as the primary measure of impact. An average lumbar microdiscectomy at our trust generates 477.73kg CO2e. The operation (173.89kg CO2e, 36.40%) and the inpatient stay (144.67kg CO2e, 30.28%) constituted the biggest contributors. Single-use intraoperative equipment contributed to over three-quarters of the total emissions from the operation. By defining the environmental burden of elective spinal surgery, we have identified carbon hotspots to target for sustainable change. Substituting polluting elements for carbon-friendly alternatives and challenging the single-use culture, modern healthcare systems can help pave the way to a ‘net zero’ healthcare system.

The efficacy of the product development process is measured by the ability to launch a project with product and production process specifications that could guarantee that the manufacturing can produce it with the least impact. If a problem is detected late, they bring consequences beyond the high cost of the solution, if related to physical ergonomics, which will influence the well-being of operators, productivity, and quality. Virtual Reality (VR) and Digital Human Modeling (DHM) are ones of the enabling technologies of Industry 4.0 and has already been applied on a large scale in industries such as automotive, construction, and aeronautics. However, even though the huge applications, these technologies are not yet applied by these industries for the analysis of physical ergonomics during product development phases. This study aims to characterize the state of the art and technology about the application of Virtual Reality and Digital Human Modeling for the physical ergonomics analysis in the during product development phases in the industry through a systematic review of the literature and patents. In patent documents recovery, we used Derwent Innovation database. The research is based on searching the selected terms in the title, summary, and claims of the documents through a search strategy containing IPC code and keywords. In articles recovery, we searched ScienceDirect, Springer, and IEEExplore databases for scientific publications. The search resulted in 311 patents documents and 16 articles in the scientific database. This study analyzed the patents to map out the technological progress in this area, where we found in the charts and data an increasing number of publications per year and a spread application with a considerable number of new technologies presented in these recent patents. The literature review indicated that Virtual Reality technology complements the Digital Human Modeling during physical ergonomics analysis for manufacturing process already designed. The majority of research on the use of VR and DHM technologies for physical ergonomics analysis focus on the automotive industry and the ergonomic assessment of workstations and current processes. Further research is needed to investigate how Virtual Reality and Digital Human Modeling might assist in the understanding of physical ergonomics in certain tasks throughout the product development process, such as the simulation of worker posture or effort when assembling parts.

Rainfall runoff modeling has been a subject of interest for decades due to a need to understand a catchment system for management, for example regarding extreme event occurrences such as flooding. Tropical catchments are particularly prone to the hazards of extreme precipitation and the internal drivers of change in the system, such as deforestation and land use change. A model framework of dynamic TOPMODEL, DECIPHeR v1 - considering the flexibility, modularity and portability - and Generalized Likelihood Uncertainty Estimation (GLUE) method are both used in this study. They reveal model performance for the streamflow simulation in a tropical catchment, i.e. the Kelantan River in Malaysia, that is prone to flooding and experiences high rates of land use change. 32 years' continuous simulation at a daily time scale simulation along with uncertainty analysis resulted in a Nash Sutcliffe Efficiency (NSE) score of 0.42 from the highest ranked parameter set, while 25.35% of the measurement falls within the uncertainty boundary based on a behavioral threshold NSE 0.3. The performance and behavior of the model in the continuous simulation suggests a limited ability of the model to represent the system, particularly along the low flow regime. In contrast, the simulation of eight peak flow events achieves moderate to good fit, with the four peak flow events simulation returning an NSE > 0.5. Nonetheless, the parameter scatterplot from both the continuous simulation and analyses of peak flow events indicate unidentifiability of all model parameters. This may be attributable to the catchment modelling scale. The results demand further investigation regarding the heterogeneity of parameters and calibration at multiple scales.

Carbon dioxide capture and storage (CCS) is a necessary requirement for high-emitting CO2 industries to significantly reduce volumes of greenhouse gases released to the atmosphere and mitigate the climate change. Geological CO2 storage into depleted oil and gas fields is the fastest and most accessible option for CCS deployment allowing for re-purposing of existing infrastructure and utilizing the significant knowledge about the subsurface acquired during the field production operations. Location of such depleted fields in neighbourhood of high-emitting CO2 industries is additional advantage available for matured on-shore Europe fields. Considering these advantages, the oil and gas operators are now evaluating different possibilities for CO2 sequestration projects for the fields approaching end of production. This article describes an integrated approach to reservoir simulations focused on evaluating CO2 injection pilot at one of such matured fields operated by MND and located in the Czech Republic. The potential CO2 injection site in focus is a naturally fractured carbonate reservoir. This oil-bearing formation has a gas cap at the top and a limited aquifer at the bottom of the reservoir and was produced mainly by pressure depletion with quite limited pressure support from water injection. The article summarizes results of efforts taken by the multi-disciplinary team to develop and apply an integrated approach to reservoir simulation started from geological modelling of the naturally fractured reservoir and integrating results of laboratory studies and their interpretation (geomechanical and geochemistry laboratory experiments) and dynamic field data analysis (pressure transient analysis including time-lapse) into the history matching of the reservoir model and simulations of pilot CO2 injection. Attention is given to evaluating and modelling stress-sensitive fracture properties and safe injection envelope preventing induced fracturing as well as impact of potential salt precipitation in the near wellbore area. These effects are considered in the context of pilot CO2 injection and addressed in reservoir simulations of the injection scenarios. Single porosity and permeability reservoir simulations with dominating fracture flow and black-oil formulation with CO2 simulated as a solvent were used in this study and arguments for such choice of the simulation approach for the site in focus are shortly discussed. The reservoir simulations have indicated larger site injection capacity than required for the pilot injection and allowed to evaluate CO2 migration pathway within the reservoir. The application of the approach to the site in focus has also revealed large uncertainties, related to fracture description and geomechanical evaluations, resulted in an uncertain safe injection envelope. These uncertainties should be addressed in further studies in preparation to the pilot. The article concludes with an overview of the outcomes of the integrated approach and its application to the field in focus including discussion of issues and uncertainties revealed.

This study analysed through the perspective of networks the association between physical activity (PA), sedentary behaviour (SB), and cardiovascular risk factors in overweight low-income schoolchildren from the perspective of complex systems. Methods: The sample consisted of 41 overweight children between 6 and 10 years old (56% girls). PA and SB were analysed by accelerometer, and the measures of cardiovascular factor risk were: anthropometric and hemodynamic measurements, body fat, lipid profile and glucose, cardiorespiratory fitness (CRF), left ven-tricular mass (LVM), and Sokolov-Lyon. Network analysis with Boot-strap-1000 was performed to analyze the association between PA, SB and the cardiovascular risk factors. Results: Moderate to vigorous PA was positive related with Waist circumference (WC; 0.499), HDL-C (0.307), and CRF (0.276), and negatively associated with BMI (-0.251) and Fat (-0.341). For SB, positive associations were seen with WC (0.326), CRF (0.296), LVM (0.250) and Sokolov (0.215). Adicionalment, the centrality indicators highlighted WC as the most important variable in the network. Conclu-sion: Interventions that aim to mitigate the harmful effects of obesity on cardiovascular risk factors in overweight children should consider WC as an important variable in of system.

The aim of this study was to develop and assess the reliability and validity of an innovative field test that measures lower limb explosive power in basketball players (i.e., alactic anaerobic capacity) for the dominant and non-dominant leg. The test examines the performance of vertical, horizontal, and combined movements while holding the ball – similar to penetration of the basket or layup. Such capabilities are required throughout basketball practice and games, combined with upper and lower body coordination. The study included 22 male basketball players, ages 16-18, members of an elite youth league team in Israel. To assess validity, the participants performed the test for each leg, followed by nine standardized tests that were developed for a range of ball games, including basketball. To assess reliability, the participants performed a retest of the unique test 72-hours later. Our findings indicate the validity and reliability of the proposed anaerobic alactic field test for basketball players, for the dominant and non-dominant leg. Moreover, strong correlations were seen between the novel test and the standardized tests, with a high correlation for horizontal explosive power (0.5<r<0.7), a very high correlation for vertical explosive power (0.7<r<0.9), and a nearly perfect correlation for the two combined (r>0.9). In conclusion, this unique field test for basketball players could assist coaches in developing and applying optimal training programs and game plans, for players individually, and for the team as a whole. As the test measures each leg separately, it could also offer an assessment tool following players’ injuries.

Anti-microbial drugs and coccidiostat compounds are commonly used in poultry farming. These compounds are subsequently excreted and released into the environment via broiler litter (BL) and can re-enter the food chain as fertilizer and/or animal feed. Residues of such drugs can encourage the appearance of antibiotic-resistant bacteria (ARB), as well as toxicity, when found in animal feed. The aim of this study was to develop a multi-residue analytic method for assessing 30 an-ti-microbial drugs and coccidiostats associated with BL and investigate the effects of stacking treatment on anti-microbial and coccidiostat residue degradation in BL used for ruminant feed at the lab-scale. Today, most analytical methods used to identify and quantitate these drug residues are traditional, and may be specific to some antimicrobials. All call for lengthy sample preparation and may present limitations in assessing broiler litter. Such conventional mul-ti-anti-microbial/coccidiostat residue detection assays employ liquid-liquid extraction (LLE) and solid phase extraction (SPE) for sample purification. In our research, LLE and SPE were replaced by Quick, Easy, Cheap, Effective, Rugged and Safe (QuEChERS) clean-up steps for 30 an-ti-microbials and coccidiostats used in broiler farming and detection by liquid chromatography mass spectrometry (LC/MS/ MS). Using this method, recoveries were 70-120%, with the exception of norfloxacin and narasin, which showed recoveries of 67 and 68%, respectively. This analytical meth-od results show that eight samples were not detected in 42 samples, while in 34 samples, one or more drugs were present. Eighteen anti-microbial and coccidiostat residues were detected dur-ing one year sample collaction. The most frequently detected residues were narasin, nicarbazin, monensin, robenidine, oxytetracycline, chlortetracycline, norfloxacin and sulfachloropyridazine, seen at levels from 0.4 to 8.9 mg•kg-1 (ppm). Nineteen anti-microbials and one coccidiostat were degraded to 95% by the stacking treatment. However, tilmicosin and eight coccidiostats persisted in litter (26-100%). The use of antimicrobials and coccidiostats in animal farming is of paramount concern with respect to human, animal and environmental contamination issues and as a source of resistant pathogenic bacteria. Still, most farmers use BL as ruminant feed and fertilizer without processing. Even though the effects of the stacking treatments on degradation of antimicrobials were significantly high, the degradation of coccidiostats and tilmicosin was limited. Clearly, BL should be treated and supervised before use as feed supplement or for land application. Hence, the present method, designed to support these goals, was optimized in terms of sensitivity and se-lectivity for the analytes addressed.

Flood frequency analysis at large scales, essential for the development of flood risk maps, is hindered by the uncertainty in outputs of process-based hydrological models and the scarcity of gauge flow data. We develop a Bayesian hierarchical model (BHM) based on the Generalized Extreme Value (GEV) distribution for regional flood frequency analysis at high resolution across North America. Our model leverages annual maximum flow data from ≈20000 gauged stations and a dataset of 130 static catchment-specific covariates to predict extreme flows at all catchments over the continent as well as their associated statistical uncertainty. Additionally, a modification is made to the data layer of the BHM to include daily gauge discharge data when available, which improves the precision of the discharge level estimates. We validated the model using a hold-out approach and found that its predictive power is very good for the GEV distribution location and scale parameters and improveable for the shape parameter, which is notoriously hard to estimate. The resulting discharge return levels yield satisfying agreement when compared with available design peak discharge from various government sources. Assessment of the covariates’ contributions to the model also informs on the most relevant underlying factors influencing flood-inducing peak flows. The key covariates in our model are temperature-related bioindicators, the catchment drainage area and geographical location.

Infant cry is evolutionarily, psychologically, and clinically significant. During the last 60 years, several researchers and clinicians assessed the possibility of investigating the acoustical properties of cry for medical purposes. However, there is a lack of standardization in conducting and reporting cry-based studies. In this work, methodologies and procedures employed in infant cry analysis are reviewed, and best practices for reporting studies are provided. First, available literature on vocal and audio acoustic analysis have been examined to identify critical aspects of participant information, data collection, methods, and data analysis. Then, 180 peer-reviewed research articles have been assessed to certify the presence of identified critical information. Results show a general lack of critical description. Researchers in the field of infant cry need to agree on a standard set of criteria to report experimental studies, to better demonstrate the validity of the methods and obtained results.

Within this paper, electro-mechanical long-term tests on a thrust bearing are presented. The effects of an additional electrical load on the bearing raceways and the used lubricant are investigated. Chemical and rheological investigations are presented which show the changes in the lubricant. These investigations are compared with the electrical loads and the occurring raceway damage. In addition, a comparison is made with mechanical reference tests. This procedure makes it possible to classify the changes that occur due to the electrical load and to distinguish the effects from each other. The background to these investigations is the increased occurrence of parasitic currents in electric motors, which can lead to damage to machine elements. The phenomena that occur here are new challenges in the development of drive trains.

Introduction: EEGLAB is one of the most famous software for processing, analyzing, and researching experiments that have Electroencephalography (EEG) datasets. Due to the numerous and famous add-ins along with global, widespread communications and online free training, its popularity increased every year. Method: To address this phenomenon from a bibliographic perspective, we found 20,464 citations in Google Scholar for the main EEGLAB reference since 8/27/2023. Then, only the Web of Science (WOS) articles were 12,700 that they were extracted. The results were analyzed with Bibliometrix package from CRAN R software. Results: The time span of these articles is from 2004 to 2023 with 12,700 documents in 1,125 sources (journals, books, etc.), 29,125 authors, 19,062 author’s keywords, 13,707 keywords PLUS, 279,617 references. The annual growth rate is 28.12 %, international Co-authorship is 37.27 % and Co-authors per document is s 4.89 and the average citations per document is 22.51. The most relevant sources are Neuroimage, Frontiers in Human Neurosciences, Scientific Reports, Psychophysiology, and PLOS One with 780, 526, 446,425, and 371 articles, respectively. The most cited countries are the USA, Germany, and the United Kingdom with 93,093, 32,621, and 20,748 total citations, respectively. The ERPLAB, ADJUST, and ICLabel add-ins have the local to global citation ratios equal to 85.4%, 65.1%, and 78.2% respectively. Other bibliometric analyses such as co-occurrence networks and thematic maps of abstracts, titles, and keywords are estimated and presented. Conclusions: EEGLAB is among the most cited MATLAB toolboxes in computational neuroscience. Many developed and developing countries use it in their research publications.

The paper addresses an analysis of the efficiency and profitability of the operation of a photovoltaic installation located in the geometric centre of Europe (near Białystok, Poland), where the intensity of solar irradiation is not too high compared to other European countries. It is calculated that in that place average solar irradiation being lower even by approx. 26 kWh than that for the whole Europe, which results in a 26% drop in the economic potential of the utilisation of solar energy for its conversion. A case study and an economic analysis show that without minimum funding amounting to 50% of the investment costs paid for the modernisation of a central heating system assisted by PV cells, the time of return of pecuniary expenditures exceeds 7 years. Apart from the Simple Pay-Back Time SPBT, discount indicators determined in the paper also include the net present value NPV and the internal rate of return IRR. Moreover, a direct ecological effect has been determined for such an investment.

Failure of wind turbines is a multi-faceted problem and its monetary impact is often unpredicted. In this study, we present a novel application of survival analysis on wind turbine reliability performance that includes accounting of previous failures and history of scheduled maintenance. We investigate the operational, climatic and geographical factors which affect wind turbine failures and model the risk rate of wind turbine failures based on data from 109 turbines in Germany operating during a period of 19 years. Our analysis showed that adequately scheduled maintenance can increase the survivorship of wind turbine systems and electric subsystems up to 2.8 and 3.8 times, respectively compared to the ones without scheduled maintenance. Geared-drive wind turbines and their electrical systems were observed to have 1.2- and 1.4-times higher survivorship, respectively, compared to direct-drive turbines and their electrical systems. It is also found that survivorship of frequently-failed wind turbine components, such as switches, is worse in geared-drive than in direct-drive wind turbines. We show that survival analysis is a useful tool for guiding the reduction of operating and maintenance costs of wind turbines.

Osteoarthritis (OA) is the degeneration of cartilage in joints that results in bones rubbing against each other, it causes uncomfortable symptoms such as pain, swelling, stiffness, and can lead to disability. It usually occurs in the elderly and causes a large medical burden. The aim of this study is to evaluate cost-effectiveness between the standard treatment for osteoarthritis and the standard treatment with added crystalline glucosamine sulfate at various stages. The Markov analysis modelling was applied to evaluate the effect of both adding glucosamine compared to standard treatment from a societal perspective during whole patients’ lifetimes. Data input was collected by review in previous studies. The outcome was measured in quality-adjusted life years (QALYs), and the incremental cost-effectiveness ratio (ICER) from a societal perspective was ap-plied with 3%-discounted for all cost and outcome. One-way analysis via Tornado diagram was performed to investigate the change of factors in model. In general, the adding glucosamine into the standard treatment proved to be more cost-effectiveness compared to the standard treatment. Particularly, early stage adding glucosamine in the treatment was cost-effectiveness then post-stage adding glucosamine. The addition of supplementing crystalline glucosamine sulfate to whole regimen at any stage was cost-effectiveness at willingness-to-pay (WTP) threshold

This study introduces a novel algorithm tailored for the precise detection of lower outliers in univariate datasets, particularly suited for scenarios with a single cluster. The approach leverages a combination of transformative techniques and advanced filtration methods to efficiently segregate anomalies from normal values. Notably, the algorithm emphasizes high precision, ensuring minimal false positives, and requires only a few parameters for configuration. Its unsupervised nature enables robust anomaly filtering without the need for extensive manual intervention. To validate its efficacy, the algorithm is rigorously tested using real-world data obtained from photovoltaic (PV) module strings with similar DC capacities, containing various anomalies. Results demonstrate the algorithm's capability to accurately identify lower outliers while maintaining computational efficiency and reliability in practical applications.

The task of human action recognition (HAR) based on skeleton data is a challenging yet crucial technique owing to its wide-ranging applications in numerous domains, including patient monitoring, security surveillance, and observation of human-machine interactions. While numerous algorithms have been proposed in an attempt to distinguish between a myriad of activities, most practical applications necessitate highly accurate detection of specific activity types. This study proposes a novel and highly accurate spatiotemporal graph autoencoder network for HAR based on skeleton data. Furthermore, an extensive investigation was conducted employing diverse modalities. To this end, a spatiotemporal graph autoencoder was constructed to automatically learn both spatial and temporal patterns from human skeleton datasets. The powerful graph convolutional network, designated as GA-GCN, developed in this study, notably outperforms the majority of existing state-of-the-art methods when evaluated on two common datasets, namely NTU RGB+D and NTU RGB+D 120. On the first dataset, the proposed approach achieved accuracies of 92.3\% and 96.8\% for the cross-subject and cross-view evaluations, respectively. On the more challenging NTU RGB+D 120 dataset, GA-GCN attained accuracies of 88.8\% and 90.4\% for the cross-subject and cross-set evaluations, respectively.

This paper presents the design and implementation of a versatile IoT testbed utilizing the openHab platform along with various wireless interfaces, including Z-Wave, ZigBee, WiFi, 4G-LTE, and IR, and an array of sensors for motion, temperature, luminance, humidity, vibration, UV, and energy consumption. First, the testbed architecture, setup, basic testing, and collected data results are described. Then, by showcasing a typical day in the laboratory, we illustrate the testbed's potential through the collection and analysis of data from multiple sensors. The study also explores the capabilities of the openHab platform, including its robust persistence layer, event management, real-time monitoring, and customization. The significance of the testbed in enhancing data-collection methodologies for energy assets and unlocking new possibilities in the realm of IoT technologies is particularly highlighted.

CO2 injection into geological formations is considered one way of mitigating the increasing levels of carbon dioxide concentrations in the atmosphere and its effect on and global warming. In regard to sequestering carbon underground, different countries have conducted projects at commercial scale or pilot scale and some have plans to develop potential formations for carbon dioxide storage. In this study, pure CO2 injection is examined on a model with the properties of bunter sandstone and then sensitivity analyses were conducted for some of the important parameters. The results of this study show that the extent to which CO2 has been convected in the porous media in the reservoir plays a vital role in improving the CO2 dissolution in brine and safety of its long term storage. We conclude that heterogeneity plays a crucial role on the saturation distribution and can increase or decrease the amount of dissolved CO2 in water. Furthermore, the value of absolute permeability controls the effect of the Kv/Kh ratio on the CO2 dissolution in brine. In other words, as the value of vertical and horizontal permeability decreases (i.e. tight reservoirs) the impact of Kv/Kh ratio on the dissolved CO2 in brine becomes more prominent. Additionally, reservoir engineering parameters, such as well location, injection rate and scenarios, also have a high impact on the amount of dissolved CO2.

The effects of buckwheat intake on cardiovascular diseases (CVD) have not been systematically investigated. The aim of the present study was to comprehensively summarise studies in humans and animals evaluating the impact of buckwheat consumption on CVD risk markers and to conduct a meta-analysis of relevant data. Thirteen randomised, controlled human studies, two cross-sectional human studies and twenty-one animal studies were identified. Using random effects models, the weighted mean difference of post-intervention concentrations of blood glucose, total cholesterol and triglycerides were significantly decreased following buckwheat intervention compared with controls [differences in blood glucose: -0.85 mmol/L (95% CI: -1.31, -0.39), total cholesterol: 0.50 mmol/L (95% CI: -0.80, -0.20) and triglycerides: 0.25 mmol/L (95% CI: -0.49, -0.02)]. Responses of a similar magnitude were seen in two cross-sectional studies. For animal studies, nineteen of twenty-one studies showed a significant reduction in total cholesterol of between 12 and 54%, and fourteen of twenty studies showed a significant reduction in triglycerides of between 2 and 74%. All exhibited high unexplained heterogeneity. There was inconsistency in HDL cholesterol outcomes in both human and animal studies. It remains unclear whether increased buckwheat intake significantly benefits other markers of CVD risk, such as weight, blood pressure, insulin, and LDL-cholesterol, and underlying mechanisms responsible for any effects are unclear.

It is challenging to apply heat flow through a thermal bridge, which requires the analysis of 2D or 3D heat transfer to building energy simulation(BES). Research on the dynamic analysis of thermal bridges has been underway for many years, but their utilization remains low in BESs. This paper proposes a thermal bridge modeling and a dynamic analysis method that can be easily applied to BESs. The main idea begins with an analogy of the steady-state analysis of thermal bridges. As with steady-state analysis, the proposed method first divides the thermal bridge into a clear wall, where the heat flow is uniform, and the sections that are not the clear wall (the thermal bridge part). For the clear wall part, the method used in existing BESs is applied and analyzed. The thermal bridge part (TB part) is modeled with the linear time-invariant system (LTI system) and the system identification process is performed to find the transfer function. Then, the heat flow is obtained via a linear combination of the two parts. This method is validated by comparing the step, sinusoidal and annual outdoor temperature response of the finite differential method(FDM) simulation. When the thermal bridge was modeled as a third-order model, the root mean square error(RMSE) of annual heat flow with the FDM solution of heat flow through the entire wall was about 0.1W.

The purpose of this study was to evaluate the implementation level of urban Sustainable Development Goals (SDGs) in the Republic of Korea and to measure the extent of internal and external impacts on the implementation level. An evaluation framework was established based on relative efficiency theory, and the implementation level of urban SDGs at the local government unit in the Republic of Korea was examined by performing an analysis of each stage. First, in reference to the 2018 cross-section, the implementation level of target 11.2 (public transportation) was assessed as excellent across the country, compared with the implementation level of targets 11.5 (disaster safety), 11.6 (environment), and 11.7 (public space), which were assessed as needing improvement. Second, the factors positively impacting the implementation level of target 11.2 were urban population, GRDP, financial independence, urbanization area, and bus-only lanes, whereas the factors positively impacting the implementation level of target 11.5 were population density and GRDP. The positive factors influencing the implementation level of target 11.6 (air quality sector) were found to be GRDP, financial independence, administrative area, and renewable energy generation, whereas the effective factors of the implementation level of target 11.6 (waste management sector) were analyzed as GRDP, financial independence, and the population density of households in the waste management area. The positive factors influencing the implementation level of target 11.7 were GRDP, financial independence, administrative area, and green area.

: The purpose of this research was to verify the importance and performance of crisis management in Korean fitness center using Importance-Performance Analysis (IPA). For this study, 304 fitness center executives and managers in Seoul and Gyeonggi region were selected as from March 21 to May 17, 2020. Frequency analysis was performed using SPSS 24.0 and exploratory factor analysis was conducted to verify the validity and reliability. Priority analysis and IPA analysis were performed to compare the mean values, and the following results were obtained. First, in the first quadrant, there were 6 attributes besides keep social distancing between employees and customers. Second, in the second quadrant, there were four attributes in addition to regular disinfection of the gymnasium. Third, in the third quadrant, there were 6 attributes besides maintain furniture clean. Third, there were 6 attributes other than maintaining furniture clean in the third quadrant. Fourth, in the fourth quadrant, there are three attributes in addition to the restriction of face-to-face meetings. The conclusion is as follows. First, equip supplies for prevention of covid19, keep social distance, and check government support policies. Second, analyze of economic support policies, and research on their application methods. Third, Prepare various non-face-to-face communication methods and Untact(non-contact) marketing strategies. Fourth, make a checklist for factors with relatively little importance.

The COVID-19 pandemic caused by the novel coronavirus emerged in Wuhan City, Hubei province of China at the end of 2019, has radically transformed the lives of people around the world. Due to its fast spreading, it is currently considered as a worldwide health, social and economic concern. The lack of knowledge on this area has encouraged academic sphere for extensive research, which is reflected in exponentially growing scientific literature in this area. However, current state of COVID-19 research reveals only early development of knowledge, while a comprehensive and in-depth overview remains neglected. Accordingly, the main aim of this paper is to fill the aforementioned gap in the literature and provide an extensive bibliometric analysis of COVID-19 research across science and social science research landscape, using innovative and sophisticated bibliometric approaches (e.g. Venn diagram, Biblioshiny descriptive statistics, VOSviewer co-occurrence network analysis, Jaccard distance cluster analysis, text mining based on logistic regression). The bibliometric analysis is based on the Scopus database including all relevant and latest information on COVID-19 related publications (n=16,866) in the first half of 2020. The empirical results indicate that there is still a lack of publications of COVID-19 and its implications in less-explored (non-health) sciences, especially in social sciences. Accordingly, the findings emphasize an importance of a comprehensive and in-depth approach considering different scientific disciplines in COVID-19 research. The understanding of the evolution of emerging scientific knowledge on COVID-19 is beneficial not only for scientific community but also for evidence-based policymaking in order to prevent and address the COVID-19 pandemic.

: Nonylphenol is an endocrine disruptor who belongs to alkylphenol group of chemicals and its high occurrence in the environment can caused an adverse effect on human health. The breast milk can serve as a marker to take measure of human exposure to these chemicals through different routes of exposure. In this study, the influence of different factors (kind of wastes mothers drink, consummation of fish, pork and beef; using gloves, mail polish, using vitamins and medication) on the concentration on nonylphenol in breast milk were studied. Concentrations of nonylphenol in breast milk were determined by high-performance liquid chromatography (HPLC) with fluorescence detection. The lowest and highest concentration of nonylphenol in breast milk was 0.97 ng/mL and 4.37 ng/mL, respectively. The selected factors such as pork, beef, fish consumption, vitamin supplementation, medication, using of gloves, nail polish and gel nails were observed in relation to 4-nonylphenol concentration.

An internationally acknowledged requirement is to analyze and provide technical solutions for prevention and safety during use and maintenance of manure spreader wagons. Injuries statistics data and specific studies show that particular constructive criticalities have been identified on these machines, which are the cause of serious and often fatal accidents. These accidents particularly occur during the washing and maintenance phases, especially when such practices are carried out inside the hopper when the working bodies of the machine are in action. The current technical standards and the various safety requirements under consideration have not always been effective for protecting workers. To this end, the use of SWOT analysis allowed to highlight critical and positive aspects of the different solutions studied for reducing the risk due to contact with the working bodies. The selected and tested solution consists in a decoupling system automatically activated when the wheels of the wagon are not moving. Such a solution prevents the contact with the moving working bodies of the machine when the worker is inside the hopper. This mechatronic solution allowed to obtain a prototype that has led to the resolution of the issues related to the use of the wagon itself: in fact the system guarantees the stopping of manure spreading organs in about 12 seconds from the moment of the wheels stopping.

In the last decades, climate and environmental changes have highlighted the fragility and vulnerability of the landscape, especially in mountain areas where the effects are most severe. The strategy for hazard mitigation must deploy synergistic actions based on a thorough knowledge of the territory and its phenomena to enable integrated and effective land planning and management through suitable communication tools. This study promotes the methodological setup of a Landscape Digital Twin to establish a multi-disciplinary and multi-scalar hazards overview according to a matrix framework implementable over time and space. The original contribution to the research addresses a holistic vision that combines meaningfully qualitative with quantitative approaches to generate risk maps by integrating various indicators within a multi-hazard framework from the socio-economic perspective. This contribution presents road network risk analysis by exploiting flooding and landslide scenarios. The critical road segments or nodes most vulnerable or impacted by network performance and accessibility can be identified with minimal preprocessing from credible open-source sources. The method's applicability is tested in a Piedmont Region, northern Italy case study. The integration proposed will help generate comprehensive risk analysis maps that effectively portray the interconnectedness among natural hazards, infrastructure, and socio-economic factors fostering more resilient decision-making processes.

Fusarium species are one of the filamentous fungal taxa with the most pronounced impact on agri-cultural production and human health. The mycotoxins produced by pathogenic Fusarium not on-ly attack various plants including crops, causing various plant diseases that lead to reduced yields and even death, but also penetrate into the food chain of humans and animals to cause food poi-soning and consequent health hazards. Although sporadic studies have revealed some of the bio-synthetic pathways of Fusarium toxins, they are insufficient to satisfy the need for a comprehen-sive understanding of Fusarium toxin production. In this study, we focused on 35 serious patho-genic Fusarium species with available genomes and systematically analyzed the ubiquity of the dis-tribution of identified Fusarium and non-Fusarium derived fungal toxin biosynthesis gene clusters (BGCs) in these species through the mining of core genes and comparative analysis of correspond-ing BGCs. Additionally, novel sesterterpene synthases and PKS_NRPS clusters were discovered and analysed. This work is the first to systematically analyze the distribution of related mycotoxin biosynthesis in pathogenic Fusarium species. These findings enhance the knowledge of mycotoxin production and provide a theoretical grounding for the prevention of fungal toxin production us-ing biotechnological approaches.

Specific foods and nutrients help prevent the progression from persistent high-risk human papillomavirus (hrHPV) infection to cervical cancer (CC). We aimed to focus on dietary patterns which may be associated with hrHPV status and risk of high-grade cervical intraepithelial neoplasia (CIN2+). Overall, 539 eligible women, including 127 CIN2+, were enrolled in a cross-sectional study, and tested for hrHPV infection. Food intakes were estimated using a food frequency questionnaire. Logistic regression models were applied. Using the Mediterranean Diet Score, we demonstrated that, among 252 women with normal cervical epithelium, medium adherence to Mediterranean diet decreased odds of hrHPV infection when compared to low adherence (adjOR=0.40, 95%CI=0.22-0.73). Using principle component analysis, we also identified two dietary patterns which explained 14.31% of variance. Women in the 3^rd and 4^th quartiles of the “western pattern” had higher odds of hrHPV infection when compared with 1^st quartile (adjOR=1.77, 95%CI=1.04-3.54 and adjOR=1.97, 95%CI=1.14-4.18, respectively). Adjusting for hrHPV status and age, women in the 3^rd quartile of the “prudent pattern” had lower odds of CIN2+ when compared with 1^st quartile (OR=0.50, 95%CI=0.26-0.98). Our study is the first to demonstrate the association of dietary patterns with hrHPV infection and CC, discouraging unhealthy habits in favour of Mediterranean-like diet.

This paper identifies a criterion for choosing the largest set of rejected hypotheses in high-dimensional data analysis where Multiple Hypothesis testing is used in exploratory research to identify significant associations among many variables. The method neither requires predetermined thresholds for level of significance, nor uses presumed thresholds for false discovery rate. The upper limit for number of rejected hypotheses is determined by finding maximum difference between expected true hypotheses and false hypotheses among all possible sets of rejected hypotheses. Methods of choosing a reasonable number of rejected hypotheses and application to non-parametric analysis of ordinal survey data are presented.

The industrial sector plays a crucial role in driving global economic growth by creating employ-ment opportunities, generating local income, and significantly contributing to each country's Gross Domestic Product (GDP). However, the manufacturing industry is responsible for produc-ing a substantial amount of polluting effluents, which can harm the environment and compromise the life quality of future generations if not appropriately treated. Various methods, including physical, chemical, and biological processes, have been employed in the treatment of industrial ef-fluents. Filamentous fungi, in particular, have garnered attention as effective bioremediation agents due to their ability to produce enzymes capable of degrading recalcitrant compounds and adsorb different pollutant molecules. This study aimed to assess the collective body of research on using white and brown rot fungi to remove phenolic compounds from industrial effluents. The research employed a systematic review, incorporating scientometric analysis, with the primary goal of constructing a comprehensive overview of the evolution of this technology over time. The analysis also aimed to scrutinize its geographical distribution and identify gaps and trends within these research inquiries. Data for the study were obtained from the Web of Science (WoS) data-base using specific search terms (("white rot fung*" OR "brown rot fung*") AND (phenol* OR phenoloxidase OR "polyphenol oxidase*") AND (wastewater OR effluent* OR bioremediation)). The time frame considered ranged from 1945 to 2023, resulting in 464 publications. After refine-ment, 109 studies were selected for further analysis, focusing on using filamentous fungi in the bi-oremediation of industrial effluents. The findings revealed that white rot fungi were the most studied in industrial effluent remediation processes, accounting for 96.3% of the studies assessed, followed by brown rot fungi at 2.7%. Filamentous fungi demonstrate significant potential for treating industrial effluents due to their high capacity to degrade phenolic compounds, especially in wastewater from olive mills, paper production industries, and distilleries. Among the investi-gated species, Phanerochaete chrysosporium, Pleurotus ostreatus, Trametes versicolor, and Lentinula edodes have been the most extensively researched for this application. Notably, cultures with free cells (64.15%) stood out compared to cultures with immobilized cells, and cultures with isolated fungi surpassed microbial consortia. Geographically, Italy, Spain, Greece, India, and Brazil emerged as the most prominent countries in publications related to this area during the evaluated period.

Pool boiling is extensively utilized in various fields, such as electronics cooling, battery cooling, nuclear power plants, and chemical processing. In the process of temperature control through boiling, the generation and transportation of bubbles play a crucial role in calculating the heat transfer capacity of the system. Therefore, it holds immense significance to gain a profound understanding of the mechanisms underlying bubble formation, growth, and detachment. Currently, numerous mechanistic explanations and empirical correlations have been proposed to elucidate various parameters of bubbles during the boiling process. These findings were considered valuable references in selecting appropriate boiling media and designing efficient heating surfaces. To comprehensively present the progress of bubble formation and heat transfer during the boiling process, the forces exerted on the bubbles was highlighted in this article. And a meticulous review on bubble force analysis and correlation formulas pertaining to various relevant parameters (e.g. nucleation sites density, bubble growth rate, detachment diameter, detachment frequency) were conducted. This review article also were expected to provide a novel foundation for further exploration of enhanced boiling heat transfer.

In Saudi Arabia’s mountainous regions, debris flow is a natural hazard that poses a threat to infrastructure and human lives. To assess the potential zones of debris flow in the Al-Hada Road area, a study was conducted using Geographic Information System (GIS) analysis and remote sensing (RS) data. The study took into account various factors that could affect debris flow, such as drainage density, elevation, slope, precipitation, land use, geology, soil, and aspect. The study also included a field trip to identify 11 previous debris flow events that were influenced by high-density drainage and slope. The study utilized weighted overlay analysis in a GIS environment to create a map indicating the potential debris flow zones in the area. According to the analysis, low-risk areas cover 35,354,062.5 square meters, medium-risk areas cover 60,646,250 square meters, and high-risk zones cover an area of 8,633,281 square meters. This result was verified using the locations of previous debris flow events. The study’s findings can help planners and decision-makers identify and prioritize areas for mitigation and prevention measures. Additionally, the study contributes to understanding debris flow hazards in arid and semi-arid regions.

This study provides a comprehensive analysis of global patent trends in battery recycling, focusing on secondary batteries and related technologies across Korea, China, and the United States. The data, collected from various patent databases, was quantitatively analyzed to identify technology trends and direct future development. The analysis reveals distinct emphases on technologies such as lithium-ion and waste battery recycling, highlighting notable differences in patent activities among key companies and countries. China's large number of patents in battery manufacturing processes contrasts with the USA's focus on electrochemical cell construction and storage systems, while Korea shows significant activity in waste battery technology. The study underscores the competitive landscape and innovation efforts in the battery recycling sector, providing insights into the technological focuses and priorities of each country. It also identifies key challenges, such as the need for consistent innovation and broader geographic coverage in Korea, enhancing patent influence and international presence in China, and ensuring high patent quality and fostering innovation in lagging sectors in the United States. Addressing these challenges through enhanced collaboration, increased R&D investments, and supportive policies is crucial for strengthening the global position and driving further innovation in the battery recycling sector.

The development of unmanned satellite space technology is increasingly willing, the emergence of medium resolution satellites with sensitivity and spectral variants such as Landsat is very effective in observing environmental changes, while the purpose of this study is to monitor the development of built-in land using image transformation techniques, estimating built-in land changes. The research method uses the NDVI image transformation technique, NDBI and Built Up Index, with Landsat satellite image data obtained from USGS. Accuracy sampling is done by purposive sampling with confusion matrix accuracy test technique. The research results were found. developed land for the period 2004 - 2010 with a percentage of 19.25%, for stages 2010 - 2018 with a percentage of 30.25%. The land development was built based on the area of ​​the highest sub-district in the Kubung area in the early period with a percentage of 7.20% then in the second period with a percentage of 32.23%. The quality of the accuracy of the results of image analysis using confusion matrix technique with an image accuracy level in a field sample of 185 with an image accuracy of 86.04%.

One notable features of the SARS-CoV-2 genome is that the spike protein of SARS-CoV-2 has a functional polybasic (furin) cleavage site (RRAR) at the S1–S2 boundary through the insertion of 12 nucleotides encoding PRRA. To date, the furin cleavage site (FCS) remains an experimentally uncharted territory both structurally and functionally. For instance, whether or not FCS is actually cleaved, before or after viral cell entry or exit, still remains to be experimentally investigated. With currently available structural data, this article presents a computational structural characterization of the FCS inserted into SARS-CoV-2 spike glycoprotein, and puts forward a set of structural hypothesis against the hypothesis of SARS-CoV-2 from purposeful manipulation: (1), the inserted FCS does not alter, neither stabilize nor de-stabilize, the overall structure of SARS-CoV-2 spike glycoprotein; (2), the net structural consequence of FCS is the insertion of a furin cleavage site into SARS-CoV-2 spike glycoprotein, whose S1 and S2 subunits will still be bonded together even if the FCS is actually cleaved by furin protease.

AYUMI EYE is an accelerometer-based gait analysis device that measures the 3D accelerations of the human trunk. This study investigated the measurement accuracy of the AYUMI EYE as hardware as well as the accuracy of the gait cycle extraction program via simultaneous measurements using AYUMI EYE, a ground reaction force (GRF), and an optical motion capture system called VICON. The study was conducted with four healthy individuals as participants. The gait data were obtained by simulating four different patterns for three trials each: normal walking, anterior-tilt walking, hemiplegic walking, and shuffling walking. The AYUMI EYE and VICON showed good agreement for both the acceleration and displacement data. The durations of subsequent stride cycles calculated using the AYUMI EYE and GRF were in good agreement based on the calculated cross-correlation coefficients (CCs) with an r value of 0.896 and p-value less than 0.05, and their accuracies for these results were sufficient.

Antibiotics (ABs) are common medications used for treating infections. In cancer patients treated with immune checkpoint inhibitors (ICIs), concomitant exposure to ABs may impair the efficacy of ICIs and lead to a poorer outcome compared to AB non-users. We report here the results of a meta-analysis evaluating the effects of ABs on the outcome of patients with solid tumors treated with ICIs. PubMed, the Cochrane Library, and Embase were searched from inception until September 2019 for observational or prospective studies reporting prognosis of adult patients with cancer treated with ICIs and with or without ABs. Overall survival (OS) was the primary endpoint, and progression-free survival (PFS) was the secondary endpoint. The effect size was reported as hazard ratios (HRs) with a 95% confidence interval (CI), and an HR > 1 associated with a worse outcome in ABs users compared to no-ABs users. Fifteen publications were retrieved for a total of 2363 patients. In the main analysis (n = 15 studies reporting data), OS was reduced in patients exposed to ABs before or during treatment with ICIs (HR = 2.07, 95%CI 1.51–2.84; P<.01). Similarly, PFS was inferior in ABs users in n = 13 studies with data available (HR = 1.53, 95%CI 1.22–1.93; p<.01). In cancer patients treated with ICIs, AB use significantly reduces OS and PFS. Short duration/course of ABs may be considered in clinical situations in which they are strictly needed.

This study aims to develop a hybrid approach based on backpropagation Artificial Neural Network (ANN) and spatial analysis techniques to predict particulate matter of size 2.5 µm (PM2.5) from vehicle exhaust emissions in the State of California using Aerosol Optical Depth (AOD) and several climatic indicators (relative humidity, temperature, precipitation, and wind speed). The PM2.5 data were generated using Motor Vehicle Emission Simulator (MOVES), the measured climatic variables and AOD were obtained from the California Irrigation Management Information System (CIMIS), and NASA’s Moderate Resolution Spectroradiometer (MODIS). The data were resampled to a seasonal format and downscaled over grids of 10 by 10 to 150 by 150, and precipitation was determined to be the most important independent variable. Coefficient of determination ( ), Mean Absolute Percentage Error (MAPE), and Root Mean Square Error (RMSE) were used to assess the quality of the ANN prediction model. The model peaked at winter seasons with = 0.984, RMSE = 0.027, and MAPE = 25.311, whereas it had the lowest performance in summer with = 0.920, RMSE = 0.057, and MAPE = 65.214. These results indicate that the ANN model can accurately predict the PM2.5 concentration and can be used to forecast future trends.

Skin cancer is one of the widespread diseases that typically develop on the skin due to continuous exposure to sunlight. Although cancer can appear on any part of the human body, skin cancer reports account for over half of all cancer occurrences worldwide. There are substantial obstacles to the precise diagnosis and classification of skin lesions because of the morphological variety and indistinguishable characteristics across skin malignancies. Recently, Deep Learning models have been used in the field of image-based lesion diagnosis, and it has demonstrated diagnostic efficiency on par with that of dermatologists. To increase classification efficiency and accuracy for skin lesions, a cutting-edge multi-layer deep Convolutional Neural Network (CNN) termed SkinLesNet has been built in this study. The ResNetV50 and VGG16 models have been carefully compared to review the performance of the proposed model. The dataset used in this study, PAD-UFES-20, contains 1314 samples in total and includes three common forms of skin lesions. The proposed approach, SkinLesNet, significantly outperforms the well-known compared models in the given conditions

Finnish government's carbon neutrality goal by 2035 requires integration of renewable energy sources into the power grid. Considering the stochasticity of these resources, additional sources of flexibility are necessary to balance supply and demand in the power grid. District heating network (DHN) operators in Finland plan to shut down fossil-fuel-based combined heat and power plants and electrify heating systems by deploying heat pumps (HPs) and electric boilers. Techno-economic analysis and optimal operation of DHN-connected HPs and electric boilers in providing ancillary balancing services considering the 15-minute granularity in the balancing markets in Finland were investigated. The objective was to maximize the potential revenue for DHN operators gained from the day-ahead electricity market and frequency containment reserve (FCR) balancing markets. Three inter-connected DHNs in the Helsinki metropolitan area were optimized considering the reference year 2019 and each operator's decarbonization strategies for 2025. HPs could gain the highest profit from FCR-D up-regulation market, while the electric boiler may gain considerable profits from FCR-D down-regulation market. Compared to other balancing markets studied, the FCR-N market had a limited profit margin. Sensitivity analysis indicated that spot electricity prices and CO2 emission allowance prices have a significant impact on the profit from balancing markets.

The purpose of the investigation was to determine the relationship between rotary kiln liner loss and steel structure ovality. As measurement apparatus, a terrestrial laser scanner was used. The interior and exterior of the rotary kiln were measured. The primary focus object was inner-lining loss and the geometric characteristics of cylindrical shells. The research uncovered significant disparities in inner lining loss between sections. A correlation was found between ovality and elimination of inner lining. Due to the hypothesis of constant inner linig loss from the middle of the rotary kiln, the investigation found that the loss of brick lining was less than the value reported from the boreholes. The study offers significant information on maintenance and repair strategies for rotary kilns, which have the potential to increase their efficiency and useful life.

The study was geared toward isolating, characterizing and identifying bacterial pathogen in sachet water in addition to determines the bacterial count of the sachet water sold in Obi Local Government Area. Twelve sachet water samples from different companies were analyzed using standard microbiological methods. The microorganism found are Escherichia Coli, Staphylococcus aures, Salmonella spp, with Staphlococuss aureus showing the highest incidence (50%), observed by Escherichia coli (29.17%) and Salmonella spp with the lowest occurrence (20.8%). The presence of these microbes in drinking water possesses a threat to life. The findings consequently suggest that some of the sachet water sold in obi L.G. A are not healthy for human intake and are risky to health. Hence there's need for strict concern and routine monitoring by regulatory agencies to make sure that appropriate treatment is applied inside the manufacturing of exceptional and safe sachet drinking water. This study is aimed to analyze the bacteriological quality of some selected sachet water in Obi Local Government Area of Benue State, Nigeria.

Water resources are threatened nowadays by pollution that comes from domestic, industrial and agricultural discharges without prior treatment. This pollution causes the degradation of water quality. Surface pollutants can seep through the soil into water tables. The objective of our work is to assess and control the physicochemical quality of the Chari Baguirmi groundwater, to protect human health. The quality of 83 boreholes was assessed, while performing analysis for 12 physicochemical parameters at the National Water Laboratory and at the Center for Quality Control of Foodstuffs in Chad. These parameters are: pH, EC, Ca2+, Mg2+, Na+, K+, Cl-, SO42-, NH4+ and NO3- , Fe2+ and HCO3-. Also, the results obtained were compared with WHO standards. The geochemical statistical approach has made it possible to characterize the hydro geochemical properties and to understand the major processes of the mineralization of groundwater resources in Chari Baguirmi region in Chad. Some of its waters are acidic and weakly mineralized, rich in Fe2+ and NH4+. The origin of the mineralization is due to the alteration of the host rocks and to the hydrolysis of silicate and ferromagnesian minerals as well as anthropogenic pollution. The ammonium concentrations in N’Djamena boreholes are higher than WHO standards, indicating the presence of pollution which may come from organic waste. These results constitute a preliminary step in understanding hydro geochemical functioning and a basis for monitoring the physicochemical quality of the water in the study area.

The Inefficient water use, varying and low productivity in Kenya public irrigation schemes is a major concern. It is therefore necessary to periodically monitor and evaluate the performance of public irrigation schemes. The performance of public irrigation in western Kenya was assessed by combining benchmarking methodology and principal component analysis. The aim was to quantify and rank the performance of pumped public irrigation schemes in Kenya. Eleven benchmarking indicators were computed for the period from 2012 to 2016 and compared to global benchmark values. The indicators used fall under agricultural productivity, water supply and financial performance categories. The computed agricultural productivity was 36%–51% in Ahero, 23%–42% in West Kano and 26%–50% Bunyala irrigation scheme. Water supply performance in Ahero, West Kano and Bunyala irrigation schemes varied from 24% to 58%, 3% to 49% and 19% to 43% respectively. Financial performance varied from 46% to 54% in Ahero, 25% to 32% in West Kano and 54%–56% in Bunyala irrigation scheme. An average overall performance efficiency of 46%, 39% and 31% was obtained in Ahero, Bunyala and West Kano irrigation schemes respectively. The performance of the irrigation schemes is very poor and measures on improving performance are needed.

To build a representation of what we see, the human brain recruits regions throughout the visual cortex in cascading sequence. Recently, an approach was proposed to evaluate the dynamics of visual perception in high spatiotemporal resolution at the scale of the whole brain. This method combined functional magnetic resonance imaging (fMRI) data with magnetoencephalography (MEG) data using representational similarity analysis and revealed a hierarchical progression from primary visual cortex through the dorsal and ventral streams. To assess the replicability of this method, here we present results of a visual recognition neuro-imaging fusion experiment, and compare them within and across experimental settings. We evaluated the reliability of this method by assessing the consistency of the results under similar test conditions, showing high agreement within participants. We then generalized these results to a separate group of individuals and visual input by comparing them to the fMRI-MEG fusion data of Cichy et al. (2016), revealing a highly similar temporal progression recruiting both the dorsal and ventral streams. Together these results are a testament to the reproducibility of the fMRI-MEG fusion approach and allows for the interpretation of these spatiotemporal dynamic in a broader context.

The research paper presents a new approach towards constructing motion equations for structures with attached MTMDs (multiple tuned mass dampers). A primary system, with MDOF (multiple dynamic degrees of freedom) was reduced to an equivalent system with a SDOF (single degree of freedom) through the modal approach, and equations from additional MTMDs were added to a thus-created system. Optimization based on H2 and H∞ for the transfer function associated with the generalized displacement of an SDOF system. The research work utilized GA (genetic algorithms) and SA (simulated annealing method) optimization algorithms to determine the stiffness and damping parameters for individual TMDs. The effect of damping and stiffness (MTMD tuning) distribution depending on the number of TMDs was also analyzed. The paper also reviews the impact of primary system mass change on the efficiency of optimized MTMDs, as well as confirms the results of other authors involving greater MTMD effectiveness relative to a single TMD.

In this paper we analyze and propose new method and algorithm of selecting the optimal labor time as a function of skills following our main references Mirrlees (1971), Saez (2001) and Stancheva (2014). The optimal labor time is a situation when the utility function of individual reaches a maximum. One of the main differences with Saez (2001) is our algorithm for creation the skill distribution.

The topic of the article refers to expressions used to address the psychosocial risk linked to the workplace violence. The article bases on the Polish-French comparison, using analysis of definitions, legal acts and public statistics. The purpose is to show social differences, in the context of mobbing and “harcèlement moral”, that surface from ratified definitions of these phenomena and public statistics. The final conclusions are the effect of a compilation of results of analysis and available literature. The choice of the two European, diverse areas of comparison for the diagnosis - Poland and France - is the result of selection of the method of data content analysis, chosen by the author because of the availability of the scientific resources essential for the article and accessible during an academic stay in Centre d'Etudes de l'Emploi in France.

Elongate loach (Leptobotia elongata) is an endemic fish in China. Previous studies have provided some insights into the mitochondrial genome composition, and the phylogenetic relationships of L. elongata inferred using protein-coding genes (PCGs). However, the detailed information about is limited. Therefore, in this study, we sequenced the complete mitochondrial genome of L. elongata and analyzed its structural characteristics. The PCGs and mitochondrial genome were used for selective stress analysis and genomic comparative analysis respectively. The complete mitochondrial genome of the L. elongata, together with those of 36 Cyprinidae species, was used to infer the phylogenetic relationships of the Cobitidae family through maximum likelihood (ML) reconstruction. The results showed that the genome sequence has a full length of 16,591 bp, which includes 13 PCGs, 22 transfer RNA genes (tRNA), two ribosomal RNA genes (rRNA), and two non-coding regions (CR D-loop and light chain sub-chain replication origin OL). Overall, L. elongata shared the same gene arrangement and composition of the mitochondrial genes with other teleost fishes. The Ka/Ks ratios of all mitochondrial PCGs were less than 1, indicating that all the PCGs were evolving under purifying selection. Genome comparison analyses showed a significant sequence homology of species of Leptobotia. A significant identity between L. elongata and the other 5 Leptobotia species was observed in the visualization result, except for L. mantschurica, which lacked the tRNA-Arg gene and had a shorter tRNA-Asp gene. The phylogenetic tree revealed that the Cobitidae species examined here can be grouped into two clades, with L. elongata forming a sister relationship with L. microphthalma. This study could provide additional inferences for a better understanding of the phylogenetic relationships among Cobititdae species.

Physical symptoms are defined as symptoms for which adequate examination does not reveal a sufficient underlying root cause, e.g., pain and fatigue. The extant literature of the neurobiological underpinnings of physical symptoms has been largely inconsistent and primarily consists of (clinical) case-control studies with relatively small samples sizes. Therefore, we studied the association of brain morphology with physical symptoms in pre-adolescents from two independent and population-based cohorts. This study included 2,683 individuals from the Generation R Study (51% girls, 10.1 ± 0.6 years old) and 10,567 pre-adolescents from the ABCD Study (48% girls, 9.9 ± 0.6 years old). High- resolution structural magnetic resonance imaging (MRI) was collected using 3-Tesla MRI systems. Physical symptoms were evaluated using the somatic complaints syndrome scale from the parent-reported school-age version of the Child Behavior Checklist. Linear regression models were fitted for global brain metrics (i.e., cortical and subcortical grey matter volume and total white matter volume) as well as surface-based vertex-wise measures (surface area and cortical thickness). Analyses were initially conducted separately in each cohort and later meta-analysed. No associations were observed in either cohort separately. In the combined vertex-wise meta-analysis of both cohorts; the right hemisphere surface area, most notably the rostral middle frontal gyrus, superior frontal gyrus and anterior cingulate cortex, were related to physical symptoms after correcting for multiple comparisons (cluster area = 1,882 mm2). The present study, which is the most representative and well-powered to date, suggests that surface area, but not other measures of brain morphology, are modestly related to physical symptoms in pre- adolescents. While these effects are subtle, future longitudinal research is warranted to elucidate whether such associations indicate a cause or a consequence of the physical symptoms.