In an increasingly complex world there is a real, urgent need for methodologies to enable engineers to model complex sociotechnical systems, as these now seem to describe the majority of systems in use today. This is of course exacerbated by the increasing involvement and augmentation with “black box” AI contributions. Hollnagel produced a methodology, (FRAM) which did allow the analyst in-sights into these systems’ behaviour, but the model-based system engineering applications demand numbers and a quantitative ap-proach. In the last 10 years, this original approach developed to model systems as sets of interactive, interdependent “functions”, (abstracted from agent or component details), has been further developed to the point where it can take the basic data and structures from the current component focussed system engineering “models”, and can pull it all together into dynamic models, (as opposed to static, fixed System Theoretic Process Accimaps), from which analysts can discern how they really work in practice, and predict the emergent behaviours characteristic of complex systems. This paper describes how the FRAM methodology has now been extended to provide these extra, essential attributes. It also describes its implementation using an open-source software, freely available for use and verification on the GitHub site.

Chondroitin is a glycosaminoglycan that has gained widespread use in nutraceuticals and pharmaceuticals, mainly for treating osteoarthritis. Traditionally, it has been extracted from animal cartilage but recently, biotechnological processes have emerged as a commercial alternative to avoid the risk of viral or prion contamination and offer a vegan-friendly source. Typically, these methods involve producing the chondroitin backbone using pathogenic bacteria and then modifying it enzymatically through the action of sulfotransferases. Despite the challenges of expressing active sulfotransferases in bacteria, the use of eukaryotic microorganisms is still limited to a few works using Pichia pastoris. To create a safer and efficient biotechnological platform, we have constructed a biosynthetic pathway for chondroitin production in S. cerevisiae as a proof-of-concept. Up to 125 mg/L and 200 mg/L of intracellular and extracellular chondroitin were produced, respectively. Furthermore, as genome-scale models are valuable tools for identifying novel targets for metabolic engineering, a stoichiometric model of chondroitin-producing S. cerevisiae has been developed and used in optimization algorithms. Our research has yielded several novel targets, such as uridine diphosphate(UDP)-N-acetylglucosamine pyrophosphorylase (QRI1), glucosamine-6-phosphate acetyltransferase (GNA1) or N-acetylglucosamine-phosphate mutase (PCM1) overexpression that might enhance chondroitin production, which will guide future experimental research to develop more efficient host organisms for the biotechnological production process.

Probiotics, living microorganisms with demonstrated health benefits when administered in sufficient quantities, have a rich history as dietary supplements to benefit human health. Recently, understanding of their mechanisms in the gastrointestinal tract has prompted exploration of probiotics in treating human diseases. However, the effective and precise delivery of probiotics remains a significant challenge in therapeutic applications. Here, we review the mechanisms of action of probiotics in human health and the most advanced strategies for efficient probiotic delivery. We also discuss the potential applications of engineered probiotics in disease treatment. This review contributes insights into the evolving landscape of probiotic research for therapeutic applications.

Proteins in the crowded environment of human cells have often been studied regarding nonspecific interactions, misfolding, and aggregation, which may cause cellular malfunction and disease. Specifically, proteins with high abundance are more susceptible to these issues due to the law of mass action. Therefore, the surfaces of highly abundant cytoplasmic (HAC) proteins directly exposed to the environment can exhibit specific physicochemical, structural, and geometrical characteristics that reduce nonspecific interactions and adapt to the environment. However, the quantitative relationships between the overall surface descriptors still need clarification. Here, we used machine learning to identify HAC proteins using hydrophobicity, charge, roughness, secondary structures, and B-factor from the protein surfaces and quantify the contribution of each descriptor. First, several supervised learning algorithms were compared to solve binary classification problems for the surfaces of HAC and extracellular proteins. Then, logistic regression was adopted for the feature importance analysis of descriptors considering model performance (80.2% accuracy and 87.6% AUC) and interpretability. The HAC proteins showed positive correlations with negatively and positively charged areas but negative correlations with hydrophobicity, B-factor, beta structure proportion, roughness, and disordered regions proportion. Finally, the details of each descriptor could be explained concerning adaptative surface strategies of HAC proteins to regulate nonspecific interactions, protein folding, flexibility, stability, and adsorption. This study presented a novel approach using various surface descriptors to identify HAC proteins and provided quantitative design rules for the surfaces well-suited to human cellular crowded environments.

3D Printing (3DP) technology has revolutionized the field of the use of bioceramics for maxillofacial and periodontal applications, offering unprecedented control over the shape, size, and structure of bioceramic implants. In addition, bioceramics have become attractive materials for these applications due to their biocompatibility, biostability, and favorable mechanical properties. However, despite their advantages, bioceramic implants are still associated with inferior biological performance issues after implantation, such as slow osseointegration, inadequate tissue response, and increased risk of implant failure. To address these challenges, researchers have been developing strategies to improve the biological performance of 3D printed bioceramic implants. The purpose of this review is to provide an overview of 3DP techniques and strategies for bioceramic materials designed for bone regeneration. The review also addresses the use and incorporation of active biomolecules in 3D printed bioceramic constructs to stimulate bone regeneration. By controlling the surface roughness, and chemical composition of the implant, the construct can be tailored to promote osseointegration and reduce the risk of adverse tissue reactions. Additionally, growth factors, such as bone morphogenic proteins (rhBMP-2) and pharmacologic agent (dipyridamole), can be incorporated to promote the growth of new bone tissue. Incorporating porosity into bioceramic constructs can improve bone tissue formation and the overall biological response of the implant. As such, by employing surface modification, combining with other materials, and incorporation of 3DP workflow can lead to better patient healing outcomes.

Cardiovascular diseases continuing to be a major contributor to illness and death on a global scale and the implementation of stents has given rise to a revolutionary transformation in the field of interventional cardiology. The thrombotic and restenosis complications associated with stent implantation pose ongoing challenges. In recent years, bioactive coatings have emerged as a promising strategy to enhance stent hemocompatibility and reduce thrombogenicity. This review article provides an overview of the surface engineering techniques employed to improve the hemocompatibility of stents and reduce thrombus formation. It explores the mechanisms underlying thrombosis and discusses the factors influencing platelet activation and fibrin formation on stent surfaces. Various bioactive coatings, including anticoagulant agents, antiplatelet agents, and surface modifications, are discussed in detail, highlighting their potential in reducing thrombogenicity. Evaluation methods for assessing hemocompatibility and thrombogenicity are also reviewed, ranging from in vitro assays to animal models. Recent advances in the field, such as nanotechnology-based coatings and bioactive coatings with controlled drug release systems, are highlighted. Surface engineering of bioactive coatings holds great promise for enhancing the long-term outcomes of stent implantation by enhancing hemocompatibility and reducing thrombogenicity. Future research directions and potential clinical applications are discussed, underscoring the need for continued advancements in this field.

Lipases have tremendous potential for industrial use, particularly, those mostly active against water-insoluble substrates, such as triglycerides composed of long-chain fatty acids. However, in most cases, mutants often need to be constructed to achieve optimal performance for such substrates. Protein engineering techniques have been reported as strategies for improving lipase characteristics by introducing specific mutations in the cap domain of esterases or in the lid domain of lipases, or through lid domain swapping. Here, we have improved the lipase character of a lipase, retrieved from the Marine Metagenomics MarRef Database and assigned to the Actinoalloteichus genus (WP_075743487.1), through site-directed mutagenesis and by substituting its lid domain (FRGTEITQIKDWLTDA) by the one of Rhizopus delemar (previously Rhizopus oryzae) lipase (FRGTNSFRSAITDIVF). Results demonstrated that the redesigned mutants gain activity against bulkier triglycerides such as glyceryl tridecanoate and tridodecanoate, olive oil, coconut oil, and palm oil. The absence of a residue in the new lid, present in the original lid, appears to be a key aspect to the increase in lipase character, although full activity recovery is only obtained with lid swapping.

Focal cartilage defects are a prevalent knee problem affecting people of all ages. Due to its avascular nature, cartilage has limited self-repair capacity, and osteochondral defects can lead to pain and long-term complications such as osteoarthritis. Autologous chondrocyte implantation (ACI) has been a successful surgical approach for repairing osteochondral defects over the past two decades. However, a major drawback of ACI is the de-differentiation of chondrocytes during their in vitro expansion. In this study, we isolated ovine chondrocytes and cultured them in a two-dimensional environment as for ACI procedures. We hypothesised that the 3D scaffolds would support the cells re-differentiation without the need for growth factors and so we encapsulated them into soft collagen and alginate (col/alg) hydrogels. Chondrocytes embedded into hydrogels were viable and proliferated. After 7 days they acquired a rounded morphology and started to aggregate. Gene expression studies showed that the genes associated with chondrogenesis started to be up regulated as early as day one. At 21 days chondrocytes had extensively colonized the hydrogel, forming large cell clusters and started to deposit collagen II and aggrecan with limited collagen type I deposition. These findings highlight the potential of soft col/alg hydrogels to enhance ACI outcomes by creating a favourable microenvironment for chondrocyte reprogramming and re-differentiation, eliminating the dependency on growth factors.

The role of mesenchymal-to-endothelial transition in the angiogenic response is controversial. Toward this, the present study aimed to determine if fibroblasts contribute to angiogenesis. Endothelial differentiation of fibroblasts was induced by culturing MRC-5 cells (human fetal lung fibroblast cells) on top of Matrigel hydrogel or embedded inside the hydrogel. The formation of ca-pillary-like networks in response to angiogenic signals was observed. The tube formation occurs quickly and can be visualized us-ing a phase-contrast inverted microscope, and/or the cells can be treated with DAPI before the assay and tubes can be visualized through fluorescence or confocal microscopy. Furthermore, fibroblasts cultured in a higher concentration invaded the Matrigel hydrogel and formed stem-cell-like spheroids. These spheroids embedded in matrigel matrices of varying densities sprouted to form 3D connective-tissue networks. Collectively, our results highlight the endothelial differentiation capacity of human lung fibroblasts. The results obtained in this work may have an impact on the search for alternative cell sources for vascular tissue engineering and the overcome of obstacles to vascularization of autologous tissue-engineered constructs and the production of functional grafts for clinical use.

Engineers make things, make things work, and make things work better and easier. This kind of knowledge is crucial for innovation, and much of the explicit knowledge developed by engineers is embodied in scientific publications. In this paper, we analyze the evolution of publications and citations in Engineering in a middle-income country such as Mexico. Using a database of all Mexican publications in Web of Science from 2004 to 2017, we explore the characteristics of publications that tend to have the greatest impact; this is the highest number of citations. Among the variables studied are the type of collaboration (no collaboration, domestic, bilateral, or multilateral), the number of coauthors and countries, the language of the article, controlling for a coauthor from the USA and the affiliation institution of the Mexican author(s). Our results emphasize the overall importance of joint international efforts and suggest that publications with the highest number of citations are those with multinational collaboration (coauthors from three or more countries), written in English, and when one of the coauthors is from the USA.

The main purpose of tissue engineering is to fabricate and exploit engineered constructs suitable for the effective replacement of damaged tissues and organs, and able to perfectly integrate with the host’s organism without eliciting any adverse reaction. Ideally, autologous materials represent the best option, but they are often limited due to the low availability of compatible healthy tissues. So far, one therapeutic approach relies on the exploitation of synthetic materials: they exhibit good features in terms of impermeability, deformability and flexibility, but present chronic risks of infections and inflammations. Alternatively, biological materials, including naturally derived ones and acellular tissue matrices of human or animal origin, can be used to induce cells growth and differentiation, which are needed for tissue regeneration: however, this kind of materials lacks satisfactory mechanical resistance and reproducibility, affecting their clinical application. In order to overcome the above-mentioned limitations, hybrid materials, which can be obtained by coupling synthetic polymers and biological materials, have been investigated with the aim to improve biological compatibility and mechanical features. Currently, the interest in these mate-rials is growing, but the ideal ones have not been found yet. The present review aims at exploring some applications of hybrid materials, with particular mention to urological and cardiovascular fields: in the first case, the efforts to find a construct that can guarantee impermeability, mechanical resistance and patency will be herein illustrated; in the second case, the search for impermeability, hemocompatibility and adequate compliance will be been disclosed.

In order to overcome the disadvantages of existing treatments in heart valve tissue engineering, decellularization studies are carried out. The main purpose of decellularization is to eliminate the immunogenicity of biologically derived grafts and to obtain a scaffold that allows recellularization while preserving the natural tissue architecture. SD and SDS are detergent derivatives frequently used in decellularization studies. The aim of our study is to decellularize the pulmonary heart valves of young Merino sheep by using low-density SDS and SD detergents together, and then to perform their detailed characterization to determine whether they are suitable for clinical studies. Pulmonary heart valves of 4-6 month old sheep were decellularized in detergent solution for 24 hours. The amount of residual DNA was measured to determine the efficiency of decellularization. Then, the effect of decellularization on the ECM by histological staining was examined. In addition, the samples were visualized by SEM to determine the surface morphologies of the scaffolds. Uniaxial tensile test was performed to examine the effect of decellularization on biomechanical properties. The results showed DNA removal of 94% and 98% from the decellularized leaflet and artery portions after decellularization relative to the control group. No cell nuclei were found in histological staining and it was observed that the 3-layer leaflet structure was preserved. As a result of the tensile test, it was determined that there was no statistically significant difference between the control and decellularized groups in the UTS and elasticity modulus, and the biomechanical properties did not change. In conclusion, we suggest that the pulmonary valves of decellularized young Merino sheep can be used as a initial matrix in heart valve tissue engineering studies.

Antimicrobial resistance (AMR) is a major global concern; antibiotics and other regular treatment methods have failed to overcome the increasing number of infectious diseases. Bacteriophages (phages) are viruses that specifically target/ kill bacterial hosts without affecting other human microbiome. Phage therapy provides optimism in the current global healthcare scenario with a long history of its applications in humans that has now reached various clinical trials. Phages in clinical trials have specific requirements of being exclusively lytic, free from toxic genes with an enhanced host range that adds an advantage to this requisite. This review explains in detail the various phage engineering methods and their potential applications in therapy. To make phages more efficient, engineering has been attempted using techniques like conventional homologous recombination, Bacteriophage Recombineering of Electroporated DNA (BRED), clustered regularly interspaced short palindromic repeats (CRISPR)-Cas, CRISPY-BRED/Bacteriophage Recombineering with Infectious Particles (BRIP), chemically accelerated viral evolution (CAVE), and phage genome rebooting. Phages are administered in cocktail form in combination with antibiotics, vaccines, and purified proteins, such as endolysins. Thus, phage therapy is proving to be a better alternative for treating life-threatening infections, with more specificity and fewer detrimental consequences.

One of the most interesting groups of fatty acid derivates is the group of conjugated fatty acids, from which the most researched are conjugated linoleic acid (CLA) and conjugated linolenic acid (CLNA), which are associated with countless health benefits. Sex pheromone mixture of some insect species, including tobacco horn-worm (Manduca sexta), are typical for the production of uncommon C16 long conjugated fatty acids with two and three conjugated double bonds, as opposed to C18 long CLA and CLNA. In this study, M. sexta desaturases MsexD2 and MsexD3 were expressed in multiple strains of Y. lipolytica with different genotypes. Experiments with supplementation of fatty acid methyl esters into the medium resulted in production of novel fatty acids. Using GCxGC-MS 20 new fatty acids with two or three double bonds were identified. Fatty acids with conjugated or isolated double bonds or combination of both were produced in trace amounts. Results of this study prove that Y. lipolytica is capable of synthesizing C16 conjugated fatty acids. Further genetic optimization of the Y. lipolytica genome and optimization of the fermentation process could lead to increased production of novel fatty acid derivatives with biotechnologically interesting properties.

Nano/micron-sized bioactive glass (BG) particles are attractive candidates for both soft and hard tissue engineering. They can chemically bond to the host tissues, enhance new tissue formation, activate cell proliferation, stimulate the genetic expression of proteins, and trigger unique an-ti-bacterial, anti-inflammatory, and anti-cancer functionalities. Recently, composites based on bi-opolymers and BG particles have been developed with various state-of-the-art techniques for tis-sue engineering. Gelatin, a semi-synthetic biopolymer, has attracted the attention of researchers because it is derived from the most abundant protein in the body, viz., collagen. It is a polymer that can be dissolved in water and processed to acquire different configurations, such as hydro-gels, fibers, films, scaffolds, etc. Searching "bioactive glass gelatin" in the tile on Scopus renders 80 highly relevant articles published in the last ~10 years, which signifies the importance of such composites. First, this review addresses the basic concepts of soft and hard tissue engineering, in-cluding the healing mechanisms and limitations ahead. Then, current knowledge on gelatin/BG composites including composition, processing and properties is summarized and discussed both for soft and hard tissue applications. This review explores physical, chemical and mechanical features and ion-release effects of such composites concerning osteogenic and angiogenic respons-es in vivo and in vitro. Additionally, recent developments of BG/gelatin composites using 3D/4D printing for tissue engineering are presented. Finally, the perspectives and current challenges in developing desirable composites for the regeneration of different tissues are outlined.

Laser patterning of implant materials for bone tissue engineering purposes has shown to be a promising technique to control cell properties such as adhesion or differentiation, resulting in an enhanced osteointegration. However, the perspective of patterning the bone tissue side interface to generate microstructure effects has never been investigated. In the present study, three different laser-generated patterns were machined on the bone surface with the aim to identify the best surface morphology compatible with osteogenic-related cells recolonization. The laser patterned bone tissue was characterized by electron scanning microscopy and confocal microscopy in order to obtain a comprehensive picture of the bone surface morphology. Cortical bone patterning impact upon cell compatibility and cytoskeleton rearrangement to the patterned surfaces was performed with Stromal Cells from Apical Papilla (SCAPs). Results indicated that laser machining had no detrimental effect upon consecutively seeded cells metabolism. Orientation assays revealed that surface patterning characterized by larger hatch distances was correlated with a higher cell cytoskeletal conformation to the laser-machined patterns. For the first time, to our knowledge, bone is considered and assessed here as a potentially engineered-improvable biological interface. Further studies shall focus on in vivo implications of this direct patterning.

Genome-scale metabolic models (GEMs) play an important role in the phenotype prediction of microorganisms, and their accuracy can be further improved by integrating other types of biological data such as enzyme concentrations and kinetic coefficients. Enzyme-constrained models (ecModels) have been constructed for several species and were successfully applied to increase the production of commodity chemicals. However, there was still no genome-scale ecModel for the important model organism Bacillus subtilis prior to this study. Here, we integrated enzyme kinetic and proteomic data to construct the first genome-scale ecModel of B. subtilis (ecBSU1) using the ECMpy workflow. We first used ecBSU1 to simulate overflow metabolism and explore the trade-off between biomass yield and enzyme usage efficiency. Then, we simulated the growth rate on eight previously published substrates and found that the simulation results of ecBSU1 were in good agreement with the literature. Finally, we identified target genes that enhance the yield of commodity chemicals using ecBSU1, most of which were consistent with the experimental data, and some of which may be potential novel targets for metabolic engineering. This work demonstrates that the integration of enzymatic constraints is an effective method to improve the performance of GEMs. The ecModel can predict overflow metabolism more precisely and can be used for the identification of target genes to guide the rational design of microbial cell factories.

Decision making as a result of system dynamics analysis requires, in practice, a straightforward and systematic modelling capability as well as a high-level of customisation and flexibility to adapt to situations and environments that may vary very much from each other. While in general terms a completely generic approach could be not as effective as ad-hoc solutions, the proper application of modern technology may facilitate agile strategies as a result of a smart combination of qualitative and quantitative aspects. In order to address such a complexity, we propose a knowledge-based approach that integrates the systematic computation of heterogeneous criteria with open semantics. The holistic understanding of the framework is described by a reference architecture and the proof-of-concept prototype developed can support high-level system analysis, as well as it suitable within a number of applications contexts - i.e. as a research/educational tool, communication framework, gamification and participatory modelling. Additionally, the knowledge-based philosophy, developed upon Semantic Web technology, increases the capability in terms of holistic knowledge building and re-use via interoperability. Last but not least, the framework is designed to constantly evolve in the next future, for instance by incorporating more advanced AI-powered features.

Genome-scale metabolic model (GEM) is a powerful tool for interpreting and predicting cellular phenotypes under various environmental and genetic perturbations. However, GEM only consid-ers stoichiometric constraints, and the simulated growth and product yield values will show a monotonic linear increase with increasing substrate uptake rate, which deviates from the experi-mentally measured values. Recently, the integration of enzymatic constraints into stoichiometry-based GEMs was proven to be effective in making novel discoveries and predicting new engineer-ing targets. Here we present the first genome-scale enzyme-constrained model (eciCW773) for Corynebacterium glutamicum reconstructed by integrating enzyme kinetic data from various sources using ECMpy workflow based on the high-quality GEM of C. glutamicum (obtained by modifying the iCW773 model). The enzyme-constrained model improved the prediction of pheno-types and simulated overflow metabolism, while also recapitulating the trade-off between biomass yield and enzyme usage efficiency. Finally, we used eciCW773 to identify several gene modifica-tion targets for L-lysine production, most of which agree with previously reported genes. This study shows that incorporating enzyme kinetic information into the GEM enhances the cellular phenotypes prediction of C. glutamicum, which can help identify key enzymes and thus provide reliable guidance for metabolic engineering.

Strategic management sets the direction of a company for several years ahead. Managers and business owners who create strategy must anticipate and have the ability to see systemically—the paper deals with creating a logistics strategy for a company operating in the industrial sector. The first section summarises the theoretical background for strategy and logistics and current trends affecting logistics processes. The second chapter analyses the current state of the art in logistics strategy development and summarizes its problem areas. The central part of the paper is the proposal of a methodology for logistics strategy development in the industrial area by a progressive approach. The methodology is divided into 5 phases - preparatory, analytical, formulation, implementation, and evaluation and control phases. The methodology is partially validated. The created variants of the logistics strategy include the introduction of such elements that will lead to the gradual development of the Industry 4.0 trend in the given company. This is mainly the first variant called "automation," which includes the introduction of an automatic tractor for material import, the introduction of an automatic system for transport and storage of work in progress, and the introduction of a new logistics information system that will make greater use of already established barcodes (transparency, data in real-time).

The rapid infiltration of fake news is a flaw to the otherwise valuable internet, a virtually global network that allows for the simultaneous exchange of information. While a common, and normally effective, approach to such classification tasks is designing a deep learning-based model, the subjectivity behind the writing and production of misleading news invalidates this technique. Deep learning models are unexplainable in nature, making the contextualization of results impossible because it lacks explicit features used in traditional machine learning. This paper emphasizes the need for feature engineering to effectively address this problem: containing the spread of fake news at the source, not after it has become globally prevalent. Insights from extracted features were used to manipulate the text, which was then tested on deep learning models. The original unknown yet substantial impact that the original features had on deep learning models was successfully depicted in this study.

Glaucoma is a blinding disease largely caused by increased resistance to drainage of fluid from the eye’s anterior chamber, resulting in elevated intraocular pressure (IOP). A major site of fluid outflow regulation and pathology is the trabecular meshwork (TM) at the entrance of the eye’s drainage system. We aimed to characterize the structural and functional properties of a newly developed tissue-engineered anterior segment eye culture model. We hypothesized that repopulation of a decellularized TM with non-native TM cells could restore aspects of normal TM. The decellularization protocol removed all cells and debris while preserving the ECM. Seeded cells localized to the TM region and progressively infiltrated the meshwork ECM. Cells reached a distribution comparable to control TM after four days of perfusion culture. After a perfusion rate increase challenge, tissue-engineered cultures reestablished normal IOPs (reseeded = 13.7±0.4 mmHg, decellularized = 35.2±2.2 mmHg, p < 0.0001). eGFP expressing CrFK control cells caused a high and unstable IOP (27.0±6.2 mmHg). In conclusion, we describe a readily available, storable, and biocompatible scaffold for anterior segment perfusion culture of non-native cells. Tissue-engineered organs demonstrated similarities to native tissues and may reduce the need for scarce donor globes in outflow research.

Impulsive noise is the main limiting factor for transmission over channels affected by electromagnetic interference. We study the estimation of (correlated) Gaussian signals in an impulsive noise scenarios. In this work, we analyze some of the existing as well as some novel estimation algorithms. Their performance is compared, for the first time, for different channel conditions, including the Markov-Middleton scenario, where the impulsive noise switches between different noise states. Following a modern approach in digital communications, the receiver design is based on a factor graph model and implements a message passing algorithm. The correlation among signal samples as well as among noise states brings about a loopy factor graph, where an iterative message passing scheme should be employed. As it is well known, approximate variational inference techniques are necessary in these cases. We propose and analyze different algorithms and provide a complete performance comparison among them, showing that both Expectation Propagation, Transparent Propagation, and the Parallel Iterative Schedule approaches reach a performance close to the optimal, at different channel conditions.

The nature of fluid mechanics makes experimentation an important part of a course taught in the subject. Presented here is the application of a novel, large scale multidisciplinary model of practical education in a fluids engineering laboratory. Advantages of this approach include efficiencies through economy of scale leading to better pedagogy for students. The scale justifies dedicated academic resources to focus on developing laboratory classes and giving specific attention to designing activities that meet learning outcomes. Four examples of applying this approach to fluids mechanics experiments are discussed, illustrating tactics that have been developed and honed through many repeated instances of delivery. “The measurement lab” uses a flow measurement context to teach identifying and managing general experimental uncertainty. New students, unfamiliar with fluid mechanics are guided through a process to gain understanding that can be applied to all future experimental activities. The “pressure loss in pipes” lab discusses the advantage and process for sharing equipment and teaching resources between multiple cohorts. The provision for students is adapted for context, such as the degree program or year of study. The “weirs big and small” lab provides a methodology to teach the power of dimensional analysis to mechanical engineers using a field of fluid mechanics that is outside their usual theoretical studies. Finally, the “spillway design” lab discusses mechanisms to deliver student independent, open ended experiments at scale, without excessive staff resource requirement.

At the start of 2020 the rapid onset of the coronavirus pandemic forced higher education institutions across the world to pivot from face to face to remote teaching. For teaching methods that involve the transmission and dissemination of verbal/visual information between academic staff and students, video technologies provided immediate methods to respond to the restricted access to campus. Practical activities, that usually involve interaction with equipment, presented a greater challenge to adapt for remote delivery. With restrictions on higher education being partially lifted, many institutions worldwide intend to offer blended learning, prioritizing in-person activities that are troublesome to deliver online, such as practicals. Social distancing measures are reducing capacity and placing increased pressure on space, creating a need to optimise limited time students have in the lab and strategies to determine which activities can best utilize this limited resource. Time is constrained, leaving little opportunity to make radical changes to learning and teaching structures. In this publication, The department of Mulicdipalnary Engineering Education (MEE) at the University of Sheffield, utilise their experiences in practical teaching to provide simple, implementable ideas for blended practicals which maximize students’ learning and experiences within the envelope of available resources.

Multidisciplinary Engineering Education (MEE) at the University of Sheffield is dedicated to delivering, at scale, practical teaching to students in the Faculty of Engineering. The COVID-19 pandemic initiated the sudden suspension of face to face teaching required MEE to translate over 600 in-lab practicals to a remote delivery format. With little opportunity to coordinate, academic staff independently adopted a variety of tactics to ensure practical learning outcomes were maintained. Following the reactive response, a proactive reflection was conducted and six categories of tactics for remote practicals have been established. These categories are Provide digital artefacts; Simulated practicals; Synchronous remote participation; Asynchronous participation by proxy; Perform procedure in alternative environment; Remote staff support. The advantages and drawbacks of each of these categories is discussed and it is suggested which tactics are appropriate for particular learning outcomes or operational and environmental outcomes of equivalent in-lab practicals. Further work to comprehensively align outcomes to tactics is proposed and lasting benefit from the analysis can be realized by adopting a principle of Remote Enhanced Practicals.

Molecular engineering research is the fundamental way and the only way for the development of biomaterials. Based on molecular engineering, the biocompatibility of natural conformation and polymer biomaterials was studied. In this paper, we discuss that natural conformation is the basis of protein biological function, and that the synergistic action of peptide chain and side group is the motive force for protein to construct natural conformation and complete biological function. On the basis of the influence of the adsorption of polymer biomaterials on the natural conformation of proteins, the relationship between biocompatibility of biomaterials and protein conformation is further explained. Studies have shown that bismuth molecular materials can only be applied in the market and have their functionality if they have good biocompatibility. Therefore, the biocompatibility evaluation of new materials has important practical significance.

Organ-on-Chip is a game-changing technology born from the convergence of tissue engineering and microfluidic technology. Organ-on-Chip devices (OoCs) are expected to offer effective solutions to persisting problems in drug development and personalized disease treatments. This opinion paper surveys the current landscape in research, development, application and market opportunities for OoCs to help establishing a global and multi-stakeholder OoC ecosystem. Based on a bibliometric study, a market analysis, expert interviews, and panel discussions held at the ORCHID Vision Workshop (Stuttgart, 23 May 2018), we outline presently unmet needs, key challenges, barriers and perspectives of the field, and finally propose recommendations towards the definition of a comprehensive roadmap that could render OoCs realistic models of human (patho)physiology in the near future.

The challenges to sustainability governance across multiple geographical/cultural contexts lead us to the “piecemeal engineering” idea advocated by the philosopher Karl Popper, which explicitly considers context. We argue for adopting the piecemeal engineering approach, augmented by adaptive policies and modern (online) collaboration platforms to maximize the prospects of sustainable practices worldwide. This recommended course is not intended to be a theory in itself. Rather, it is a well-grounded, practical and practicable stop-gap measure in times when complexity and change outpace theories and strategies. We present a philosophical foundation for this “Augmented Popperian Experimentation.” Focusing on The Water Network (the largest collaborative platform for water researchers and professionals), we show that sustainability-oriented organizations in the water realm and others are inching toward the practice we advocate. We discuss implications.

Good transportation systems are pre-requisites to economic development. Materials used for road construction are traditionally classified based of empirically developed archaic tests, often classifying naturally available materials as unsuitable for use in the load-bearing road pavement layers. Consequently, design standards usually require the use of imported materials at considerable costs, severely restricting road network development under scenarios of limited funding. New technologies and test methods based on sound engineering criteria, incorporating basic material sciences can substantially change this scenario. Nano-silane technologies can be utilised to improve naturally available materials to meet the engineering requirements of all layers in road structures. Material test and design methods have been developed and successfully tested in South Africa to build New-age Modified Emulsion (NME) stabilised layers in roads, meeting all engineering requirements. Accelerated Pavement Tests (APT) done on actual roads, proved the concept. This work is based on a scientific approach and identification of various factors that will impact on the successful application of applicable nanotechnology solutions. This paper aims to identify these fundamental factors that are a pre-requisite for the evaluation of nanotechnology solutions to ensure that new technologies are introduced into pavement engineering designs at a low risk to any implementing.

Autonomous navigation in dynamic environments poses a significant challenge in the field of ro-botics with the primary goals of ensuring both smooth and safe movement. This study introduces control strategy based on an Adaptive Neuro-Fuzzy Inference System (ANFIS) to enhance au-tonomous robot navigation in dynamic environments, emphasizing on collision-free path plan-ning. This strategy employs, a path planning technique to develop a trajectory that allows the ro-bot to navigate smoothly while avoiding collisions with both static and dynamic obstacles. The developed control system incorporates four ANFIS controllers: two are tasked with guiding the robot toward its end point, and the other two are activated for obstacle avoidance. The experi-mental setup conducted in CoppeliaSim involves a mobile robot equipped with ultrasonic sensors navigating in an environment with static and dynamic obstacles. Simulation experiments are conducted to demonstrate the model's capability in ensuring collision-free navigation, employing a path planning algorithm to ascertain the shortest route to the target destination. The simulation results highlight the superiority of the ANFIS-based approach over conventional methods, partic-ularly in terms of computational efficiency and navigational smoothness.

The importance of detecting and diagnosing the imminence of aneurysm rupture before it occurs cannot be overstated. However, this process is often time-consuming and challenging, with variability in conclusions not uncommon among experts. Furthermore, current state-of-the-art models in medical image segmentation suffer from limited availability of large annotated datasets for training, exacerbated by an immense data imbalance. In most segmentation tasks, 3D segmentation is preferred due to its capacity to leverage more contextual information. However, these models require more data, which is constrained by the aforementioned issues. In the realm of current diagnosis models, those lacking geographic context are notably ineffective. To address these issues, the aim is to develop a model pipeline to accurately detect cerebral intracranial aneurysms and diagnose rupture imminence through 3D magnetic resonance angiography (MRA) and tabular input, augmented with the implementation of neuro-symbolic ai. The utilization of data fusion to tackle the lack of context in tabular models is proposed, leveraging extracted geographical features from a segmentation model. To enhance segmentation results and tackle the data imbalance in aneurysm segmentation, a two-stage model pipeline that extracts contextual geographic features before aneurysm segmentation is suggested. Segmentation results are additionally improved through ensemble techniques and novel preprocessing techniques. Finally, a neuro-symbolic aspect is introduced to enhance model diagnosis, interpretability and performance. The multi-step Integrated Neuro-Symbolic Analysis Pipeline for Cerebral Aneurysm Rupture Diagnosis is introduced.

As the name implies, severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is a single-stranded RNA virus and a member of the corona virus family, primarily affecting the upper respiratory system and the lungs. Like many other respiratory viruses, SARS-CoV-2 can spread to other organ systems. Apart from causing diarrhea, another most common but debilitating complication caused by the SARS-CoV-2 is neurological symptoms and cognitive difficulties, which occur in up to two thirds of hospitalized covid patients and ranging from shortness of concentration, overall declined cognitive speed to executive or memory function impairment. Neuro-cognitive dysfunction and “brain fog” are frequently present in COVID-19 cases, which can last several months after the infection, leading to disruption of daily life. Cumulative evidence suggests that SARS-CoV-2 affects vasculature in the extra pulmonary systems directly or indirectly, leading to impairment of endothelial function and even multi-organ damage. The post COVID-19 long-lasting neurocognitive impairments have not been studied fully; and the underlying mechanism remains elusive. In this review, we summarize the current understanding of the effects of COVID-19 on vascular dysfunction and how vascular dysfunction leads to cognitive impairment in patients.

Ursolic and oleanolic acids are secondary plant metabolites that are known to be involved in the plant defence system against water loss and pathogens. Nowadays these triterpenoids are also regarded as potential pharmaceutical compounds and there is mounting experimental data that either purified compounds or triterpenoid-enriched plant extracts exert various beneficial effects, including anti-oxidative, anti-inflammatory and anticancer, on model systems of both human or animal origin. Some of those effects have been linked to the ability of ursolic and oleanolic acids to modulate intracellular antioxidant systems and also inflammation- and cell death-related pathways. Therefore, our aim was to review the current knowledge about the distribution of ursolic and oleanolic acids in plants, bioavailability and pharmacokinetic properties of these triterpenoids and their derivatives, and to discuss their neuromodulatory effects in vitro and in vivo.

One of the most crucial and economically beneficial tasks for energy customer is peak load curtailment. On account of the fast response of renewable energy resources (RERs) such as photovoltaic (PV) units and battery energy storage system (BESS), this task is closer to be efficiently implemented. Depends on the customer peak load demand and energy characteristics, the feasibility of this strategy may warry. When adaptive neuro-fuzzy inference system (ANFIS) is exploited for forecasting, it can provide many benefits to address the above-mentioned issues and facilitate its easy implementation, with short calculating time and re-trainability. This paper introduces a data driven forecasting method based on fuzzy logic for optimized peak load reduction. First, the amount of energy generated by PV is forecasted using ANFIS which conducts output trend, and then, the BESS capacity is calculated according to the forecasted results. The trend of the load power is then decomposed in Cartesian plane into two parts, left and right from load peak, searching for BESS capacity equal. Network switching sequence over consumption is provided by a fuzzy logic controller (FLC) with respect to BESS capacity and PV energy output. Finally, to prove the effectiveness of the proposed ANFIS-based peak shaving method, offline digital time-domain simulations have been performed on a real-life practical test micro grid system in MATLAB/Simulink environment and the results have been experimentally verified by testing on a practical micro grid system with real-life data obtained from smart meter and also, compared with several previously-reported methods.

It is widely known that vitamin D receptors have been found in neurons and glial cells and their highest expression is in the hippocampus, hypothalamus, thalamus and subcortical grey nuclei, and substantia nigra. The vitamin D helps the regulation of neurotrophin, neural differentiation and maturation, through the control operation of growing factors synthesis (ie NGF and GDNF), the trafficking of the septo-hyppocampal pathway, and the control of the synthesis process of different neuromodulators (such as Ach, DA, and GABA). Based on these assumptions, we have written this review in order to summarize the potential role of vitamin D in neurological pathologies. The work could be titanic, and might result very fuzzy and even incoherent, if we would not have conjectured to taper our first intentions and devoted our interests towards three mainstreams: demyelinating pathologies, vascular syndromes and neurodegeneration. Due to the lack of effective therapeutic options, a part from the disease modifying strategies, the role of different risk factors should be investigated in neurology, as far as their correction may lead to the improvement of the cerebral conditions. We have explored the relationships between the gene-environmental influence and long term vitamin D deficiency, as a risk factor for the development of different types of neurological disorders, along with the role and the rationale of therapeutic trials with vitamin D implementation.

Yeasts are gaining increasing attention for their potential health benefits as probiotics in recent years. Researchers are actively searching for new yeast strains with probiotic properties (i.e, Debaryomyces hansenii; Kluyveromyces marxianus; Yarrowia lipolytica; Pichia hudriavzevii; Torulaspora delbrueckii) from various sources, including traditional fermented foods, the human gut, and the environment. This exploration is expanding the pool of potential probiotic yeasts beyond the well-studied Saccharomyces boulardii. Research suggests that specific yeast strains possess properties that could be beneficial for managing conditions like inflammatory bowel disease, irritable bowel syndrome, skin disorders and allergy. Additionally, probiotic yeasts may compete with pathogenic bacteria for adhesion sites and nutrients, thereby inhibiting their growth and colonization. They might also produce antimicrobial compounds that di-rectly eliminate harmful bacteria. To achieve these goals, the approach that uses probiotics for human health is changing. Next-generation yeast probiotics are emerging as a powerful new approach in the field of live biotherapeutics. By using genetic engineering, scientists are able to give these tools specialized capabilities. However, most research on these probiotic yeasts is still in its early stages, and more clinical trials are needed to confirm their efficacy and safety for various health condi-tions. This review could provide a brief overview of the situation in this field.

Biotic stressors pose serious threats to crop yield, jeopardizing food security and resulting in over US$220 billion per year losses to the agriculture industry. Plants activate innate defense mechanisms upon pathogen perception and invasion. The plant immune response comprises numerous concerted steps, including the recognition of invading pathogens, signal transduction, and activation of defensive pathways. However, pathogens have evolved various structures to evade plant immunity. Given these facts, genetic improvements of plants are required for sustainable disease management to ensure global food security. Advanced genetic technologies have provided new opportunities to revolutionize and boost plant disease resistance against devastating pathogens. Furthermore, targeting susceptibility (S) genes, such as OsERF922 and BnWRKY70, through CRISPR methodologies offers novel frontiers to disrupt the molecular compatibility of pathogens and introduce durable resistance against them in plants. Here, we provide a critical overview of advances in understanding disease resistance mechanisms. The review also critically examines management strategies under challenging environmental conditions and R gene-based plant genome engineering systems intending to enhance plant responses against emerging pathogens. This work underscores the transformative potential of modern genetic engineering practices in revolutionizing plant health and crop disease management while emphasizing the importance of responsible application to ensure sustainable and resilient agricultural systems.

The number of engineers who are transitioning into environmental sustainability careers is growing, though a gap still exists between supply and demand. This presents an opportunity for undergraduate engineering students to fulfill the demand as environmental sustainability professionals. This qualitative exploratory study investigated environmental sustainability learning experiences and future career interests in environmental sustainability. The social cognitive theory (SCCT) was utilized as a theoretical lens, exploring undergraduate students’ environmental sustainability interests, related learning experiences and their interest in pursuing a future career in environmental sustainability. Twenty-five undergraduate engineering students in various engineering disciplines were interviewed for this study. Data were analyzed to (1) identify students’ interest in pursuing a career in environmental sustainability, (2) determine if students’ interests have changed since they began their undergraduate studies, and (3) explore how learning experiences have impacted students’ future career choice. The findings posit that exposure to environmental sustainability learning experiences is impactful and plays an important role, impacting students' interests in pursuing careers in sustainability. Results reveal that elements such as personal beliefs and salary considerations inspire career choices. This research contributes to addressing the demand for additional working professionals who are prepared to tackle environmental sustainability issues, highlighting the role of learning experiences in shaping students' career interests.

Conductive hydrogels combine the properties of both hydrogels and electrical conductivity, making them soft, flexible, and biocompatible. These properties enable them to conform to irregular surfaces, stretch and bend without losing their electrical conductivity, and interface with biological systems. Conductive hydrogels can be utilized as conductive traces, electrodes, or as a matrix for flexible electronics. Exciting applications in sensors, tissue engineering and human-machine interaction have been demonstrated worldwide. This review comprehensively covers the progress in this field, focusing on several main aspects: functional materials, performance improvement strategies, and wearable applications in human-related areas. Furthermore, the major approaches and challenges for improving their mechanical properties, conductivity, and long-term stability are systematically summarized.

In his Cynefin classification of system behaviours, Snowden (2007), posits that his Simple (Clear ) and even Complicated system categories are sufficiently understandable to be amenable to the traditional methods of system analysis and modelling. Here, relationships between entities in the system are clear and unambiguous and they behave predictably. So, we can build mathematical “models” to describe how the system is expected to function in different situations. Leaving aside his fourth category, Chaotic, as too hard for the moment, this paper focusses on the third category, Complex systems. Yaneer Bar-Yam [1998] defined "complex systems" as systems that "have multiple interacting components, whose collective behaviour cannot be simply inferred from the behaviour of components." So, the traditional system modelling approach of decomposition into components and attempting to build up a picture of system performance from individual pieces, alone, is no longer appropriate for this class. The problem is that most of the methods we currently employ, and particularly the methods that attempt to make the case that these systems are safe, (such as Fault trees, FMEA. and Root Cause Analysis), rely on this decomposition into components and attempt to make the parts more reliable individually. Even the more systemic approaches, such as Reason’s (1990) Swiss Cheese Model, and Leveson’s System Theoretic Analysis (STPA) (2004), encourage adding layers of protection, barriers, strengthened control loops and better safety critical systems, in the hope that they are making the systems safer. But without a valid model to test the effectiveness of these add-ons, we cannot be sure that they will not have an opposite effect, of making the systems even more complex, unreliable and unpredictable. For complex systems, the careful gathering and documentation of system components and their relationships is still a necessary first step, but we need an additional capacity to model these complex systems to test out and prove they work safely and successfully in the real world. (not just draw fixed component relationships as system “models” (wiring diagrams)) In the last 10 years, an original approach developed by Hollnagel, (2012), to model systems as sets of interactive, interdependent “functions”, (abstracted from and independent of component details), has now been developed to the point where it can take the basic data and structures from the current component focussed system engineering “models”, such as MBSE( Goldberg (1994)), and can pull it all together in a dynamic system model from which analysts can discern how it really works in practice, and predict the emergent behaviours characteristic of complex systems. The paper describes how this methodology developed and how it is currently used to model real situations, to analyse incidents and anticipate events.

For years, effort has been devoted to establishing an effective bull breeding soundness evaluation procedure; usual research on the subject is based on BBSE (Bull Breeding Soundness Examination) methodologies, which have significant limitations in terms of their evaluation procedure, such as high cost, time-consuming and administratively difficult. This research focuses on the creation of a prediction model to supplement and/or improve the BBSE approach, through the study of two algorithms, Clustering and Artificial Neural Network (ANN), to find the optimum Machine Learning (ML) approach for our application, with an emphasis on data categorization accuracy. The tool is designed to assist veterinary medicine and farmers in identifying key factors and increasing certainty in their decision-making during the selection of bulls for breeding purposes, providing data from a limited number of factors generated from a deep pairing study of bulls. Zebu Bulls, European Bulls, and Crossbred Bulls were the general groupings. The data utilized in the model's creation (N =359) considers five variables that influence improvement decisions. This approach enhances decision-making by 12%. ANN obtained an accuracy of 90%; Precision was 97% for satisfying, 92% for unsatisfying, and 85% for Bad.

The following are three successful case studies that affected humanity during the COVID-19 pandemic. The key to their success was their swift adaptability to the new confinement regulations and the unyielding determination of those carrying out their plans. Various extraordinary and prompt efforts were required to make the essential logistical preparations and practice for distance learning a reality. The research activities were also reorganized so the thesis students might carry out a few simple experiments at home under the strict supervision of their advisers and supervisors. The findings revealed that the students who participated in these projects applied all the abilities they had gained before the epidemic. In addition, they included crucial knowledge about the project, problem-based, and research-based learning. Furthermore, because they were the primary implementers of the trials, they learned by planning and performing experiments. The culmination of these efforts was displayed in three scientific publications that were published in index journals with a high level of impact. This latter factor is essential for the prestige and visibility of the university, in addition to the acquisition of financing and grants for scientific research.

In our discipline, some numbers, facts and methods are established and unquestionable. Still, a credible source is hard to find. Likewise, some state-of-the-art papers do not have the right focus, or they do not point at current research trends and future mission statements. Lastly, reliable resources for claims and statements that are arguable are not always found in the typical journals of our field. The paper at hand solves this issue for our field. Through critical review of a vast amount of journal papers, monographs, handbooks, conference proceedings and theses as well as manuals, textbooks and tutorials, numbers, facts, methods, claims statements, state-of-the-art, research and application trends are reflected and substantiated.

Critical sized bone defects and articular cartilage injuries resulting from trauma, osteonecrosis or age-related degeneration are often nonhealing by the physiological repairing mechanisms, thus representing a clinic issue due to the relevant epidemiological incidence. Current treatment approaches consist of autologous or allogenic grafting, which are associated with painfulness, morbidity, risk of infections and rejection. Novel tissue-engineering approaches, aiming at the reconstruction of damaged tissues, have been proposed as alternative solutions to these conven-tional methods. These approaches are based on the combination of three fundamental compo-nents: autologous or allogenic cells, a scaffold and growth-stimulating signals, which are gener-ally referred to as the tissue engineering triad. Three-dimensional polymer networks are fre-quently used as scaffolds to allow cell proliferation and tissue regeneration. In this scenario, cryogels are giving promising results as cell scaffolds over other polymer networks, thanks to their peculiar properties. In particular, cryogels possess an interconnected porous structure and a typical sponge-like behaviour, which facilitate the cellular infiltration and ingrowth. Their properties can be appropriately adjusted to match the requirements of the specific tissue or or-gan that it is intended to regenerate. In this review it is reported the state of the art on the fabri-cation and employment of cryogels in supporting osteo or chondro-genic differentiation for the re-building of more organized tissues. Moreover, it will highlight current progress and future perspectives in the implementation of this technology in the clinical practice.

This work aimed to synthesize new N-rich triazole compounds. In this article we describe the synthesis of three different 1,2,4-triazole-based systems starting from 1,3-diaminoguanidine hydrochloride monohydrate. The structure of the obtained crystals was established by single-crystal X-Ray diffraction. The high nitrogen content of the synthetized compounds makes them building blocks for the application in the High-Energy-Density material science.

In the last two decades, gelatin-based hydrogels have been widely used as tissue engineering scaffolds due to their excellent biocompatibility, biodegradability, easy processability, transparency, non-toxicity, and reasonable structural similarity to the natural extracellular matrix (ECM). However, intrinsic low mechanical properties of gelatin are not structurally and mechanically suitable to support cell growth and proliferation. That’s why various crosslinking strategies including physical, chemical, enzymatic and combination of them as well as networking patterns including double network, interpenetrating network and nano reinforcing mechanism have been utilized to enhance the structural stability and mechanical integrity of gelatin. In this review, the advances in modulating the mechanical properties of gelatin-based hydrogels for the design and development of structurally stable scaffolds for tissue engineering are discussed. The optimized crosslinking parameters with the adequate mechanical properties of gelatin-based hydrogels are reviewed. Gelatin-based scaffolds for a wide range of tissue engineering applications, such as bone, cartilage, cardiac, skin, and nerve tissue engineering are also outlined. Lastly, current challenges and future perspectives in this research field are presented.

Herein are reported the main pros and cons of using the conversational Artificial Intelligence (AI) called “ChatGPT” as a tool to write essays in the academic and scientific community. Also, selected mathematical and scientific problems were solved to determine the effectiveness of this platform. To this end, a systematic case study was designed and conducted to obtain data generated by the chatbot that was further analyzed. Six different topics were chosen for the essay evaluation, and the introduction section was created using this AI. Meanwhile, six mathematical problems related to integrals, z-transform, Laplace transform, and resolution of ordinary differential equations were solved. Furthermore, a scientific problem associated with the structural properties of material was also solved. After data analysis, we concluded that the conversational platform could quickly create written essays with well-structured words. Nonetheless, in almost all cases, the chatbot only used basic information to complete the introduction, and no critical writing was obtained. For the mathematical case study, we observed that under the current status of the ChatGPT, this platform has no ability or skills to solve complex equations. Thus, significant changes need to be conducted to improve the performance of ChatGPT for mathematical solutions.

Mesenchymal stem cells (MSCs) are an attractive therapeutic tool for tissue engineering and regenerative medicine owing to their regenerative and trophic properties. The best-known and most widely used are bone marrow MSCs which are currently being harvested and developed from a wide range of adult and perinatal tissues. MSCs from different sources are believed to have different secretion potentials and production which may influence their therapeutic effects. To confirm it, we performed a quantitative proteomic analysis based on the TMT technique of MSCs from three different sources: Wharton’s jelly (WJ), dental pulp (DP) and bone marrow (BM). Our analysis focused on MSC biological properties of interest for tissue engineering. We identified a total of 611 differentially expressed human proteins. WJ-MSCs showed the greatest variation compared with the other sources. WJ produced more extracellular matrix (ECM) proteins and ECM-affiliated proteins and appeared more able to modulate the inflammatory and immune response. BM-MSCs displayed enhanced differentiation and paracrine communication capabilities. DP-MSC appeared to promote exosome production. The results obtained confirm the existence of differences between WJ, DP and BM-MSC and the need to select the MSC origin according to the therapeutic objective sought.

This research examines the impact of social equity on energy consumption. We constructed a digital twin for residential energy consumption by enriching the synthetic population with real-world surveys and feeding them with other environmental and appliance data to the energy modeling framework. We analyzed household hourly energy consumption data from Albemarle County and Charlottesville City in Virginia, USA, for the year 2019. We used clustering analysis to identify patterns in social equity and energy consumption. The results demonstrated the impact of different residential attributes on energy poverty. Statistical analyses, including ANOVA and Chi-Squared tests, were conducted to test for significant differences between racial groups in quantitative and categorical variables. The study found that race is significant in determining the location and quality of housing. People of color often live in areas with higher pollution and less access to green spaces. Additionally, income levels and the age of the house are influential factors in determining energy efficiency. Future work should focus on collecting and analyzing data at the country level and using qualitative data collection methods to gain a more comprehensive understanding of social equity issues concerning energy consumption. Overall, this study provides valuable insights into the relationship between different residential attributes and energy consumption, which can inform policy development to promote more equitable and sustainable communities.

In this study, 3D printing of poly-l-lactic acid (PLLA) scaffolds reinforced with graphene oxide (GO) nanoparticles via Digital Light Processing (DLP) was investigated to mimic bone tissue. Stereolithography is one of the most accurate additive manufacturing method, but the dominant available materials used in this method are toxic. In this research, a biocompatible resin (PLLA) was synthetized and functionalized to serve the purpose. Due to the low mechanical properties of the printed product with the neat resin, graphene oxide nanoparticles in three levels (0.5, 1, and 1.5 Wt.%) were added with the aim of enhancing the mechanical properties. At first, the optimum post cure time of the neat resin was investigated. Consequently, all the parts were post-cured for three hours after printing. Due to the temperature-dependent structure of GO, all samples were placed in an oven at 85 ° C for different time periods of 0, 6, 12, and 18 hours to increase mechanical properties. The compression test of heat treated samples reveals that the compressive strength of the printed parts containing 0.5,1, and 1.5 % of GO increased by 151,162 ad 235%, respectively. Scaffolds with the designed pore sizes of 750 microns and a porosity of 40% were printed. Surface hydrophilicity test was performed for all samples showing that the hydrophilicity of the samples increased with increasing GO percentage. The degradation behavior of the samples was evaluated in a PBS environment, and it revealed that by increasing GO, the rate of component degradation increased, but the heat treatment had the opposite effect and decreased the degradation rate. Finally, besides improving biological properties, a significant increase in mechanical properties under compression can introduce the printed scaffolds as a suitable option for bone implants.

It is known that people perceive animacy in objects. However, many studies on animacy and emotional expressions are limited in that the investigated motions were created by experimenters themselves. This makes the objective validity unclear. Moreover, it remains unclear what types of movements can express emotions with animacy due to the limited number of investigations examining both animacy and emotional expressions. Therefore, we investigated the motion elements for both animacy perception and emotional expressions using simple objects that lack features of specific living things, such as eyes, ears, tails, and voices in this study. First, we investigated the motion elements for animacy perception and emotional expressions using a robot simulator that enabled participants to create undulatory motions by tuning parameters for speed, height, and randomness. In total, 64 participants created motions in Normal (neutral), Joy, Sad, Relaxed, and Angry conditions. The results showed that the medians of speed and height in Normal, related only to animacy, were 0.5569[Hz] and 3.050cm at the edges/4.575cm at the center. The differences in Joy were 0.4028[Hz] and 3.348cm/5.022cm, in Sad were −0.1652[Hz] and −0.9982cm/−1.497cm, in Relaxed were −0.1979[Hz] and −0.4902cm/−0.7353cm, and in Angry were 0.5212[Hz] and 4.688cm/7.032cm. Second, we investigated whether the motion elements revealed in the first experiment were sufficient to express emotions with animacy, using a robot simulator that reflected the results of the motion element investigation. In total, 44 online participants observed the simulator. The results showed that participants could understand emotional arousal levels at the same time as animacy, but they did not fully understand emotional valence. Our findings provide design guidelines for robots that exhibit emotional expressions and closely interact with humans.

Regeneration of biological tissues in medicine is challenging, and 3D bioprinting offers an innovative way to create functional multicellular tissues. One common way in bioprinting is bioink which is one type of the cell-loaded hydrogel. For clinical application, however, the bioprinting still suffers from satisfactory performance, e.g. in vascularization, effective antibacterial, immunomodulation and regulation of collagen deposition. Many studies have incorporated different bioactive materials into the 3D printed scaffolds to optimize the bioprinting. Here, we review a variety of additives added to the 3D bioprinting hydrogel. The underlying mechanisms and methodology for biological regeneration are important and will provide useful basis for future research.

Abstract: Chloroplast is a new hotspot in the field of plant transformation system of plant genetic engineering. Initially developed in Chlamydomonas and tobacco, it is now feasible in a broad range of species. They exploit the homologous recombination and segregation pathways acting on chloroplast genomes and are based on direct repeats, transient co-integration or co-transformation and segregation of trait and marker genes. Foreign site-specific recombinases and their target sites provide an alternative and effective method for removing marker genes from plastids.Chloroplast genetic engineering has many advantages over nuclear genetic enginering, especially site-specific introduction of foreign genes ,leading to the absence of gene siliency and positon effect,which providing the available to explore the regulation and mechanism of chloroplast genes`expression in vitro .It also can identify the structure and function of the chloroplast genome , the expression of chloroplast affect the nulear genome. In this paper, the basic methodology of chloroplast transformation, the current techniques and applications, and the future possibilities for Chloroplast genetic engineering was reviewed[1-3].

This research paper describes the social engineering concepts, techniques, and security countermeasures. This research aims to study various social engineering techniques to find the best countermeasures that would help to reduce social engineering attacks.

We set a feasible method to produce tailored collagen scaffolds and analyzed its potential for corneal engineering. Collagen-vitrigel membranes (CVM) were produced with a 1:1 ratio of Dulbecco’s Modified Eagle’s medium (DMEM), 1% antibiotics and 8% fetal bovine serum, and 5mg/mL collagen type I. Three volumes of collagen were used: 1X (2.8 L/mm2 of collagen), 2X, and 3X. Vitrification was done at 40% relative humidity (RH), 40° C, and 30 rpm using a matryoshka system set with a shaking-oven and a desiccator with a saturated K2CO3 solution. The CVM was characterized for width, microstructure, transparency, and biocompatibility using NIH3T3 cells. Surgical manipulation was assessed in an ex vivo corneal model. Constructs of corneal endothelial cells (CECs) and 2X-CVM were transplanted into five 18-month-old White New Zealand rabbits. CVM exhibited homogeneous surface and laminar organization. Membrane width increased with gel volume from 3.65µm to 7.2µm. 1X and 2X-CVM exhibited a 99% transmittance. NIH3T3 cells concentration increased 3-fold within 48 h with no significant difference among the 3 CVM (p = 0.323). The 2X-CVM was surgically manipulable. Transplantation of corneal endothelial cells (CECs) seeded over 2X-CVM restored corneal endothelium. The matrioshka system is a feasible method that yields CVM suitable for corneal engineering.

As consequence of the digital transformation, e-learning methodologies have become an inseparable part of the standard classes in schools and universities, assuming an increasingly significant role in compensating for the difficulties resulting from the COVID-19 pandemic. Numerous pedagogical methodologies and strategies can be easily implemented in high education, promoting students’ motivation and interest in learning. This research study analyses the implementation of gamification pedagogical strategy on 50-60 undergraduate chemical engineering students at the university, by evaluating its effect on the success rate on a specific topic of Chemical Reactions Engineering subject and the motivation effect for the following topics. Our results show a significant positive effect of the gamification strategy on university lectures, increasing up to 25-30 % of the success ratio with an apparent motivation effect. During the subsequent years, the changes in the lifestyle of study also play a role in students’ performance. Therefore, it is necessary to evaluate case studies such as the one presented here to understand better the use of these pedagogical methods and strategies in high education, especially in technical subjects described in this paper.

There is need to address the challenges of organ shortage, through development of tissues and organs with alternatives to those of the allograft-kind. This illustrates the quest behind novel biofabrication strategies such as 3D bio-printing, which is necessary to create artificial multi-cellular tissues/organs. Several findings have been reported in this review. First, the role of ECM components in tissue regenerative medicine is presented. Different ECM components such as collagen, gelatin, elastin, fibronectin, laminins and glycosaminoglycans are concisely examined for their tissue regenerative medicine applications. Next, current state of research on extrusion-based 3D bio-printing techniques and their limitations are reviewed. For example, we show that cell viability is still a challenge with extrusion, while the use of natural polymers such as collagen in improving composites’ mechanical properties is limited. Lastly, we examine unresolved research questions necessary to advance the present state of research in the field.

The national study analyzes sea level rise (SLR) impacts based on 36 different SLR and storm surge scenarios across 5.7 million geographic locations and 3 time periods. Taking an approach based on engineering design guidelines and current cost estimates, the study details projected cost impacts for states, counties, and cities. These impacts are presented from multiple perspectives including total cost, cost per-capita, and cost per-square mile. The purpose of the study is to identify specific locations where infrastructure is vulnerable to rising sea levels. The study finds that Sea Level Rise (SLR) and minimal storm surge is a $400 billion threat to the United States by 2040 that includes a need for at least 50,000 miles of protective barriers. The research is limited in its scope to protecting coastal infrastructure with sea walls. Additional methods exist and may be appropriate in individual situations. The study is original in that it is a national effort to identify infrastructure that is vulnerable as well as the cost associated with protecting this infrastructure.

Inteins are prevalent among extremophiles. Mini-inteins with robust splicing properties are of particular interest for biotechnological applications due to their small size. However, biochemical and structural characterization has still been limited to a small number of inteins, and only a few inteins serve as widely used tools in protein engineering approaches. We determined the crystal structure of a naturally-occurring Pol-II mini-intein from Pyrococcus horikoshii and compared it with two other natural mini-inteins from Pyrococcus horikoshii. Despite the similar sizes, the comparison revealed distinct differences in insertions and deletions, implying specific evolutionary pathways from distinct ancestral origins. Our studies suggest that sporadically distributed mini-inteins might be more promising for further protein engineering applications than the highly conserved mini-inteins. Structural investigations of more inteins could guide the shortest path to finding novel robust mini-inteins suitable for protein engineering purposes.

Innovative tissue engineering biomimetic hydrogels based on hydrophilic polymers have been investigated for their physical and mechanical properties. 5% to 25% by volume loading PHEMA-nanosilica glassy hybrid samples were equilibrated at 37°C in aqueous physiological isotonic and hypotonic saline solutions (0.15 and 0.05 M NaCl) simulating two limiting possible compositions of physiological extracellular fluids. The glassy and hydrated hybrid materials were characterized both for dynamo-mechanical properties and equilibrium absorptions in the two physiological-like aqueous solutions. Mechanical and the morphological modifications occurring in the samples have been described. The 5% volume nanosilica loading hybrid nanocomposite composition showed mechanical characteristics in the dry and hydrated states that were comparable to those of cortical bone and articular cartilage, respectively, and then chosen for further sorption kinetics characterization. Sorption and swelling kinetics were monitored up to equilibrium. Changes in water activities and osmotic pressures in the water-hybrid systems equilibrated at the two limiting solute molarities of the physiological solutions have been related to the observed anomalous sorption modes using the Flory-Huggins interaction parameter approach. The bulk modulus of the dry and glassy PHEMA-5% nanosilica hybrid at 37°C has been observed to be comparable with the values of the osmotic pressures generated from the sorption of isotonic and hypotonic solutions. The anomalous sorption modes and swelling rates are coherent with the difference between osmotic swelling pressures and hybrid glassy nano-composite bulk modulus: the lower the differences the higher the swelling rate and equilibrium solution uptakes. Bone tissue engineering benefits of use of tuneable biomimetic scaffold biomaterials that can be “designed” to act as biocompatible and biomechanically active hybrid interfaces are discussed.

Ustilago maydis, member of the Ustilaginaceae family, is a promising host for the production of several metabolites including itaconic acid. This dicarboxylate has great potential as a bio-based building block in the polymer industry, and is of special interest for pharmaceutical applications. Several itaconate overproducing Ustilago strains have been generated by metabolic and morphology engineering. This yielded stabilized unicellular morphology through fuz7 deletion, reduction of by-product formation through deletion of genes responsible for itaconate oxidation and (glyco)lipid production, and the overexpression of the regulator of the itaconate cluster ria1 and the mitochondrial tricarboxylate transporter encoded by mttA from Aspergillus terreus. In this study, itaconate production was further optimized by consolidating these different optimizations into one strain. The combined modifications resulted in itaconic acid production at theoretical maximal yield, which was achieved under biotechnologically relevant fed-batch fermentations with continuous feed.

Bioelectrocatalysis has become one of important research fields in electrochemistry and provided a firm base for an important technology for application to various bioelectrochemical devices such as biosensors, biofuel cells, and biosupercapacitors. The understanding and technology in bioelectrocatalysis have been greatly improved by introducing nanostructured electrode materials and protein-engineering methods over the last few decades. Recently, the electro-enzymatic production of renewable energy resources and useful organic compounds (bioelectrosynthesis) also attracts worldwide attention. In this review, we summarize recent progress in applications of enzymatic bioelectrocatalysis.

A novel software engineering platform called the Dynamic Nuchwezi Architecture Platform (DNAP) is introduced, specified and its novelties explained. The unique features of this platform are explained and several new concepts and abstractions upon which its implementation, usage, and analysis are hinged also elaborately discussed. The motivations for this new approach to building especially tools used in data engineering are spelled out and the platform is contrasted against other existing technologies of a similar kind. Finally, it is shown what known limitations DNAP suffers, as well as what room for further research and improvement there is in this field.

The lean supply chain of construction engineering projects is to achieve the maximum satisfaction of the owners' needs in order to effectively achieve the goal of supply chain management. This paper explores an effective method of lean supply chain cost management for construction engineering projects with target cost management, so that each participating unit on the supply chain node can fully utilizes its core competencies to minimize internal consumption and waste, and achieve the optimal overall efficiency of the supply chain. According to the requirements of the goal planning theory of the construction project company, establish a lean supply chain cost planning system for the construction project, realize the basic model of the lean supply chain cost management of the construction project, and set the target cost from the lean project of the construction project. The technical decomposition is established by the process of cost decomposition and cost pressure transmission and sub-target cost planning.

We show that an experimentally plausible system consisting of a modulated wire medium hosted in a metal cavity can preserve the longitudinal field profile shaping predicted by Boyd et al. (2018) on the basis of a perfectly periodic wire-only structure. These new frequency domain numerical results are a significant step towards justifying the construction of an experimental apparatus to test the field profile shaping in practise.

Uncertainty is the main source of risk of geological hazards in tunnel engineering. Uncertainty information not only affects the accuracy of evaluation results, but also affects the reliability of decision-making schemes. Therefore, it is necessary to evaluate and control the impact of uncertainty on risk. In this study, the problems in existing entropy-hazard model such as inefficient decision-making and failure of decision-making are analysed, and an improved uncertainty evaluation and control process are proposed. Then the tolerance cost, the key factor in the decision-making model, is also discussed. It is considered that the amount of change in risk value (R1) can better reflect the psychological behaviour of decision-makers. Thirdly, common attribute decision models, such as the expected utility-entropy model, are analysed, and then the viewpoint of different types of decision-making issues that require different decision methods is proposed. The well-known Allais paradox is explained by the proposed methods. Finally, the engineering application results show that the uncertainty control idea proposed here is accurate and effective. This research indicates a direction for further research into uncertainty, and risk control, issues affecting underground engineering works.

Human induced pluripotent stem cells (hiPSCs) are reprogrammed cells that have hallmarks similar to embryonic stem cells including the capacity of self-renewal and differentiation into cardiac myocytes. The improvements in reprogramming and differentiating methods achieved in the past 10 years widened the use of hiPSCs, especially in cardiac research. hiPSC-derived cardiac myocytes (CMs) recapitulate phenotypic differences caused by genetic variations, making them human attractive disease models and useful tools for drug discovery and toxicology testing. In addition, hiPSCs can be used as source cells for cardiac regeneration in animal models. Here, we review the advances in the genetic and epigenetic control of cardiomyogenesis that underlies the significant improvement of the induced reprogramming of somatic cells to CMs. We also cover the phenotypic characteristics of the hiPSCs derived CMs, their ability to rescue injured CMs through paracrine effects, the novel approaches in tissue engineering for hiPSC-derived cardiac tissue generation, and finally, their potential use in biomedical applications.

Here, we present a staged approach for an innovative repurposing of a portable infant humidicrib into a live cell growth, observation, and imaging system. Furthmore, humidicrib can support different variations of “umbilical” bioreactors, and can be used to conduct electrophysiology experiments and in situ immunohistochemistry. Modifications incorporate a closed loop carbon dioxide (CO₂) concentration control system with umbilical CO₂ and heating support for tailored bioreactors. The repurposing cost is inexpensive and allows for the continued observation and imaging of cells. This prototype unit has been used to continuously observe and image live primary neurons for up to 21 days. This demonstrates the repurposed units’ suitability for use in tissue culture based research, particularly where modifications to microscopes are required or where sensitive manipulation outside of a standard incubator is needed.

Due to the manufacturing process of Additive Manufacturing (AM) Parts the mechanical properties cannot be predicted. The scope of the present work is to propose a predictive tool for the mechanical properties of AM parts through the use of Adaptive Neuro-Fuzzy Inference System (ANFIS). The Adaptive Neuro-Fuzzy Inference System (ANFIS) combines neural networks with fuzzy logic to generate a mapping between the inputs and the output. Real data experiments from different AM technologies and materials compose the initial dataset so a detailed investigation is conducted to gain knowledge of how different parameters affect the UTS, the elongation and the Young modulus of each experiment. Experimental data were also use to train, check and verify the methodology. The method is tested for FFF technology, PLA material and 3 point bending stress, with interesting results.

Multiple Sclerosis (MS) is a neurodegenerative disease that mainly affects young adults. The high prevalence of the disease and its impact on patients' quality of life led to priority being given to the etiopathogenesis of the disease to identify possible modifiable factors and consequent effective intervention strategies. Recent hypotheses suggest that the etiopathogenesis of MS is multifactorial and includes factors related to the immune system, neuroinflammation and neuro-degeneration. In this scenario, sleep has a close - although indirect - relationship with MS, through its relationship with each of those factors. In particular, the role of cytokines in immune system impairment and neuroinflammation, mitochondrial dysfunction and oxidative stress in neurodegeneration all are associated with sleep in different forms. Furthermore, melatonin in relation with vitamin D has a potential therapeutic effect in MS sleep-related problems. Given the growing interest of research in the mechanisms underlying MS and therapies able to alleviate MS-related symptoms at all stages of the disease, a more in-depth study of the role of sleep disturbances and the factors intrinsically related to sleep and MS could be useful both to investigate the etiopathogenetic factors of MS and to develop potential non-invasive intervention strategies for MS treatment.

The target of an antibody plays a significant role in the success of antibody-based therapeutics and diagnostics, and to an extent, that of vaccine development. This importance is focussed on the target binding site – epitope, where epitope selection as a part of design thinking beyond traditional antigen selection using whole cell or whole protein immunisation can positively impact success. With purified recombinant protein production and peptide synthesis to display limited/selected epitopes, intrinsic factors that can affect the functioning of resulting antibodies can be more easily selected for. Many of these factors stem from the location of the epitope that can affect accessibility of the antibody to the epitope at a cellular or molecular level, direct inhibition of target antigen activity, conservation of function despite escape mutations, and even non-competitive inhibition sites. Through the incorporation of novel computational methods for predicting antigen changes to model-informed drug discovery and development, superior vaccines and antibody-based therapeutics or diagnostics can now be more easily designed to mitigate failures. With detailed examples, this review highlights the new opportunities, factors and methods of predicting antigenic changes for consideration in sagacious epitope selection.

This paper offers a comprehensive examination of the process involved in developing and automating supervised end-to-end machine learning workflows for forecasting and classification purposes. It offers a complete overview of the components (i.e. feature engineering, model selection, etc), principles (i.e. bias-variance decomposition, model complexity, overfitting, model sensitivity to feature assumptions and scaling, output interpretability, etc), models (i.e. neural networks, regression models, etc), methods (i.e. Cross-Validation, data augmentation, etc), metrics (i.e. Mean Squared Error, F1-score, etc) and tools that rule most supervised learning applications with numerical and categorical data, as well as their integration, automation, and deployment. The end goal and contribution of this paper is the education and guidance of the non-AI expert academic community over complete and rigorous machine learning pipelines and data science practices, from problem scoping to design and state-of-the-art automation tools, including basic principles and reasoning in the choice of methods. The paper delves into the critical stages of supervised machine learning workflow development, many of which are often omitted by researchers due to brevity, and covers foundational concepts essential for understanding and optimizing a functional machine learning workflow, thereby offering a holistic view of task-specific application development for applied researchers who are not AI experts.

Background: The role played by the non-dominant parietal lobe in motor cognition, attention and spatial awareness networks has potentiated the use of awake surgery. When this is not feasible, asleep monitoring and mapping techniques should be used to achieve an onco-functional balance. Objective: This study aims to assess the feasibility of a dual-strip method to obtain direct cortical stimulation for continuous real-time cortical monitoring and subcortical mapping of motor and visual pathways simultaneously in parietal lobe tumour surgery. Methods: Single-centre prospective study between May’19-November’20 of patients with intrinsic non-dominant parietal-lobe tumours. Two subdural strips were used to simultaneously map and monitor motor and visual pathways. Results: Fifteen patients were included. With regards to motor function, a large proportion of patients had abnormal interhemispheric resting motor threshold ratio (iRMTr) (71.4%), abnormal Cortical Excitability Score (CES) (85.7%), close distance to the corticospinal tract – Lesion-To-Tract Distance (LTD) – 4.2mm, Cavity-To-Tract Distance (CTD) – 7mm and intraoperative subcortical distance - 6.4mm. Concerning visual function, the LTD and CTD for optic radiations (OR) were 0.5mm and 3.4mm, respectively; the mean intensity for positive subcortical stimulation of OR was 12mA±2.3mA and 5/6 patients with deterioration of VEPs>50% had persistent hemianopia and transgression of ORs. 12 patients remained stable, one patient had a de-novo transitory hemiparesis, and two showed improvements in motor symptoms. A higher iRMTr for lower limbs was related with a worse motor outcome (p=0.013) and a longer CTD to OR was directly related with a better visual outcome (p=0.041). At 2 weeks after hospital discharge, all patients were ambulatory at home and all proceeded to have oncological treatment. Conclusion: We propose motor and visual function boundaries for asleep surgery of intrinsic non-dominant parietal tumours. Pre-operative abnormal cortical excitability of the motor cortex, deterioration of the VEP recordings and CTD<2mm from the OR were related to poorer outcomes.

Development of effective treatments for high-grade glioma (HGG) is hampered by 1) the blood-brain barrier (BBB), 2) an infiltrative growth pattern, 3) rapid development of therapeutic resistance, and, in many cases, 4) dose-limiting toxicity due to systemic exposure. Convec-tion-enhanced delivery (CED) has the potential to significantly limit systemic toxicity and in-crease therapeutic index by directly delivering homogenous drug concentrations to the site of disease. In this review, we present clinical experiences and preclinical developments of CED in the setting of high-grade gliomas.

Post-concussion syndrome, recently recognized as a complication of mild traumatic brain injury, is considered a consequence of the summative effect of multiple concussions received over lifetime. In elderlies, the main mild brain trauma mechanism is fall (low impact force). Many falls are often not reported or noticed but may generate serious medical and medico-legal consequences. Our research question was to find if a single, very mild brain trauma can induce neuro-behavioral consequences in elderlies. One database was queried (PubMed – MeSH terminology) looking for histopathological, neuro-cognitive and behavioral changes that can be generated by sub-concussional trauma in senescent rodents, in comparison with young animals. 41 published research articles were selected. 17 of them used very mild brain trauma in young and senescent animals, in the same experiment (6 rats and 11 mice). 24 articles evaluated the effect of sub-threshold brain trauma in adult animals (no control group). Five trauma models were used (blast models were excluded). Neuro-inflammatory changes were detected immediate after very mild primary impact. In young animals, observed pathology disappeared fast (after 3 to 7 days). Increased apoptosis, mild axonal injury in white matter tracts plus maladaptive astrogliosis and microglial activation was stronger in aged animals, persisted over time (8 months) and significantly altered animals’ cognition and behavior. Associated preexisting pathology (hypertension, tau protein deposits, microbleeds, reactive inflammation) was often responsible for amplification of the primary impact results. As translation of observation is the weak spot of pathology and behavior animal research, further investigation is needed before to conclude that even a single, very mild brain trauma may have medical consequences on human senescent brain.

As new treatment modalities are being explored in neuro-oncology, viruses are emerging as a promising class of therapeutics. Virotherapy consists of introduction of either wild-type or engineered viruses to the site of disease, where they exert anti-tumor effect. These viruses can either be non-lytic, in which case they are used to deliver gene therapy, or lytic, which induce tumor cell lysis and subsequent host immunologic response. Replication-competent viruses can then go on to further infect and lyse neighboring glioma cells. This treatment paradigm is being explored extensively in both preclinical and clinical studies for a variety of indications. Virus-based therapies are advantageous due to the natural susceptibility of glioma cells to viral infection, which improves therapeutic selectivity. Furthermore, lytic viruses expose glioma antigens to the host immune system and subsequently stimulate an immune response that specifically targets tumor cells. This review surveys the current landscape of oncolytic virotherapy clinical trials in high-grade glioma, summarizes preclinical experiences, identifies challenges associated with this modality across multiple trials, and highlights potential to integrate this therapeutic strategy into promising combinatory approaches.

Fabrication of scaffolds via 3D printing is a promising approach for tissue engineering. In this study, we combined 3D printing with cryogenic crosslinking to create biocompatible gela-tin/oxidized alginate (Gel/OxAlg) scaffolds with large pore sizes, beneficial for bone tissue re-generation. To enhance the osteogenic effects and mechanical properties of these scaffolds, we evaluated the impact of hydroxyapatite (HAp) on the rheological characteristics of the 2.86% (1:1) Gel/OxAlg ink. We investigated the morphological and mechanical properties of scaffolds with low, 5% and high 10% HAp content, as well as the resulting bio and osteogenic effects. Scanning electron microscopy revealed a reduction in pore sizes from 160-180 µm (HAp-free) to 120-140 µm for both HAp-containing scaffolds. Increased stability and higher Young’s moduli were measured for 5% and 10% HAp (18 and 21 kPa, respectively) compared to 11 kPa for HAp-free constructs. Biological assessments with mesenchymal stem cells indicated excellent cytocompati-bility and osteogenic differentiation in all scaffolds, with high degree of mineralization in HAp-containing constructs. Scaffolds with 5% HAp exhibit improved mechanical characteristics and shape fidelity, demonstrate positive osteogenic impact, and enhance bone tissue formation. Increasing the HAp content to 10% did not show any advantages in osteogenesis, offering a minor increase in mechanical strength at the cost of significantly compromised shape fidelity.

Genetic engineering has become an essential element in developing climate-resilient crops and environmental sustainable solutions to respond to the increasing need for global food security. Genome editing using CRISPR/Cas [Clustered regulatory interspaced short palindromic repeat (CRISPR)-associated protein (Cas)] technology is being applied to a variety of organisms, including plants. This technique has become popular because of its high specificity, effectiveness, and low production cost. Therefore, this technology has the potential to revolutionize agriculture and contribute to global food security. Over the past few years, increasing efforts have been seen in its application in developing higher-yielding, nutrition rich, disease resistant, stress-tolerant “crops” fruits and vegetables. Cas proteins such as Cas9, Cas12, Cas13, and Cas14, among others, have distinct architectures and have been used to create new genetic tools that improve features that are important for agriculture. The versatility of Cas has accelerated genomic analysis and facilitated the use of CRISPR/Cas to manipulate and alter nucleic acid sequences in cells of different organisms. This review provides the evolution of CRISPR technology exploring its mechanisms and contrasting it with traditional breeding and transgenic approaches to improve different stress tolerance. We have also discussed the CRISPR/Cas system and explored three Cas proteins that are currently known to exist: Cas12, Cas13, and Cas14 and their potential to generate foreign DNA free or non-transgenic crops that could be easily regulated for commercialization in most countries.

Outdoor lighting design is a multidisciplinary topic that involves, among other aspects, design, energy savings, protection of nocturnal biodiversity and profitability, all of which are important functional and regulatory requirements. However, they do not necessarily consider user needs, which make perception and emotional response difficult parameters in the lighting design process. The studies carried out on lighting and its impact on emotions have mainly been done indoors. The objective of this work is to propose a methodology to evaluate emotional response to the illuminated nocturnal urban space with the purpose of providing knowledge to create emotionally efficient luminous spaces that improve people's perception and well-being. The instrument used was the survey (online questionnaires), based on Kansei engineering, created to incorporate the emotional variable in product design. The research was carried out with participants from Peru, Spain, and Germany. The results collected the reaction of the participants to different types of night-time luminous spaces presented, which contributes to a better understanding of user needs and activities regarding the space. This knowledge is intended to help designers meet their expectations.

Artificial intelligence (AI) has witnessed an exponential increase in its use in various applications. Recently, the academic community started to research and inject new AI-based approaches to provide solutions to traditional software engineering problems. However, a comprehensive and holistic understanding of the current status is missing. To close the above gap, synthetic knowledge synthesis was used to induce a research landscape of the contemporary research literature on the use of AI in software engineering. The synthesis resulted in 15 research categories and five themes, namely natural language processing in software engineering, use of artificial intelligence in the management of software development life cycle, use of machine learning in fault/defect prediction and effort estimation, employment of deep learning in intelligent software engineering and code management, and mining software repositories to improve software quality. The most productive country was China (n=2042), followed by the United States (n=1193), India (n=934), Germany (n=445), and Canada (n=381). A high percentage (n=47.4%) of papers were funded, showing a strong interest in this research topic. The convergence of AI and software engineering can significantly reduce needed resources, improve quality, increase user experience, and improve the well-being of software developers.

The main purpose of this study was to design a workplace in the conditions of a digital factory. The goal of this study is to compile a proposal for improving the layout solution in the selected enterprise to reduce material flows between individual workplaces. In addition, the workplace research study uses methods of material flow analysis with the application of visTABLE software support, which serves as a tool for designing production processes. The main result of the study was the reduction of the production time of the beam by 10 minutes and the creation of proposals for solutions for the company. The study helped with the visualization of processes within the digital factory to simplify and clarify processes at the workplace.

The main goal of the research is to assess the effectiveness of aerial ground-penetrating radar (GPR) in delineating boundaries between disturbed clayey ground and rock formations along the old Wadi. The study also tackles technical challenges associated with drone-based GPR applications in urban open areas, considering geological heterogeneity, topographic variations, and environmental conditions. The potential of using drone-based GPR equipped with an unshielded dipole antenna as a transformative tool in geospatial analysis was demonstrated. The research encompasses academic insights and field borehole drilling experiments to validate the accuracy and reliability of drone-based GPR data in real-world scenarios. Anticipated contributions include advancements in understanding drone-based GPR technology for mapping disturbed soil boundaries in foundation engineering applications and other relevant areas and recommendations for optimizing its performance in challenging terrains.

Adipose stem cells (ASCs) have multilineage differentiation capacity and hold great potential for regenerative medicine. Compared to bone-marrow-derived mesenchymal stem cells (bmMSCs), ASCs are easier to isolate from abundant sources with significantly higher yields. It is generally accepted that bmMSCs show age-related changes in their proliferation and differentiation potentials, whereas this aspect is still controversial in the case of ASCs. In this review, we evaluated the existing data on the effect of donor age on the osteogenic potential of human ASCs. Overall, a poor agreement has been achieved because of inconsistent findings in the previous studies. Finally, we attempted to delineate the possible reasons behind the lack of agreements reported in the literature. ASCs represent a heterogeneous cell population and the osteogenic potential of ASCs can be influenced by donor-related factors such as age, but also gender, lifestyle, and the underlying health and metabolic state of donors. Furthermore, future studies should consider experimental factors in in-vitro conditions, including passaging, cryopreservation, culture conditions, variations in differentiation protocols, and readout methods.

Bacteriotherapy is emerging as a strategic and effective approach to treat infections by providing putatively harmless bacteria (i.e., probiotics) as antagonists to pathogens. A proper delivery of probiotics or their metabolites (i.e., post-biotics) can avail itself of biomaterial encapsulation by innovative manufacturing technologies. This review paper aims at providing the most recent biomaterial-assisted strategies proposed to treat infections or disbiosis using bacteriotherapy. We revised the encapsulation processes across multiscale biomaterial approaches, which could be ideal to target different tissues and suit diverse therapeutic opportunities. Hydrogels, and in particular polysaccharides, are the focus of this review, as they have been reported to better sustain vitality of the live cells incorporated. Specifically, the approaches for fabricating hydrogel-based devices with increasing dimensionality (D), namely, 0D (i.e., particles), 1D (i.e., fibers), 2D (i.e., fiber meshes), and 3D (i.e., scaffolds) endowed with probiotics, were detailed by describing their advantages and challenges, along with a future overlook in the field. Electrospinning, electrospray and 3D bioprinting were investigated as new biofabrication methods for probiotic encapsulation within multidimensional matrices. Finally, examples of biomaterial-based systems for cell and post-biotic release were reported.

Research on Cas9 nucleases from different organisms holds great promise for advancing genome engineering and gene therapy tools as it could provide novel structural insights into CRISPR editing mechanisms, expanding its application area in biology and medicine. The current study focuses on generating a construct to express a compact Cas9 nuclease (AnoCas9) from the thermophilic microorganism Anoxybacillus flavithermus. Next, distinctive AnoCas9 properties are investigated. AnoCas9 gene is expressed in E.coli producing a polypeptide fused with the maltose-binding protein (MBP-AnoCas9). His-Tag in its structure enables purification using metal-chelate chromatography followed by the cleavage of the polypeptide by TEV protease. Bioinformatical analysis of the CRISPR array found in the genome of an Anoxybacillus flavithermus strain helps predict a functional PAM sequence for AnoCas9, which is supported by in vitro experiments. The purified protein demonstrates nuclease activity in the presence of crRNA:tracrRNA duplex in the 37-60 °С range, with maximum activity observed at 45-55 °С. The analysis of FAM-labeled dsDNA substrate cleavage has allowed us to determine the functional AnoCas9 PAM motif as 5’-NNNNCDAA-3’. Thus, AnoCas9 adds to the repertoire of thermophilic Cas9 effectors and its properties suggest application in areas requiring the presence of thermostable CRISPR/Cas systems.

Extensive damage to peripheral nerves is a health problem with few therapeutic alternatives. In this context, the development of tissue engineering seeks to obtain materials that can help recreate environments conducive to cellular development and functional repair of peripheral nerves. Different hydrogels have been studied and presented as alternatives for future treatments to emulate the morphological characteristics of nerves. Along with this, other research proposes the need to incorporate electrical stimuli into treatments as agents that promote cell growth and differentiation; however, no precedent correlates the simultaneous effects of the types of hydrogel and electrical stimuli. In this research, the neural differentiation of PC12 cells we are evaluated, relating the effect of collagen, alginate, GelMA, and PEGDA hydrogels with electrical stimulation modulated in four different ways. Our results show significant correlations for different culture conditions, allowing us to develop new experimental schemes for new materials in peripheral nerve engineering.

Evaluating mutation testing behavior can help decide whether refactoring successfully maintains the expected initial test results. Moreover, manually performing this analytical work is both time-consuming and prone to errors. This paper extends an approach to assess test code behavior and proposes a tool called MeteoR. This tool comprises an IDE plugin to detect issues that may arise during test code refactoring, reducing the effort required to perform evaluations. A preliminary assessment was conducted to validate the tool and ensure the proposed test code refactoring approach is adequate. By analyzing not only the mutation score but also the generated mutants in the pre- and post-refactoring process, results show that the approach is capable of checking whether the behavior of the mutants remains unchanged throughout the refactoring process. This proposal represents one more step toward the practice of test code refactoring. It can improve overall software quality, allowing developers and testers to safely refactor the test code in a scalable and automated way.

Hydrogels prepared from natural polymer have attracted extensive attentions in biomedical fields such as drug delivery, wound healing, and regenerative medicine due to their good biocompatibility, degradability and flexibility. This review outlines the commonly used natural polymer in hydrogel preparation, including cellulose, chitosan, collagen/gelatin, alginate, hyaluronic acid and starch. The polymeric structure and process/synthesis of natural polymers are illustrated, and natural polymer-based hydrogels including the hydrogel formation and properties are elaborated. Subsequently, the biomedical application of hydrogels based on natural polymer in drug delivery, tissue regeneration, wound healing and other biomedical field is summarized. Finally, the future perspectives of natural polymers and hydrogels based on them are discussed. For natural polymer, novel technologies such as enzymatic and biological methods are developed to improve the structural properties and the development of new natural based polymers or natural polymer derivatives with high performance is still very important and challenging. For natural polymer-based hydrogels, novel hydrogel materials, like double-network hydrogel, multifunctional composite hydrogels and hydrogel microrobots are designed to meet the advanced requirements in biomedical application, and new strategies such as dual-crosslinking, microfluidic chip, micropatterning and 3D/4D bioprinting, have been explored to fabricate advanced hydrogel materials with designed properties for biomedical application. Overall, natural polymeric hydrogels have attracted increasing interests in biomedical application, and the development of novel natural polymer-based materials and new strategies/methods for hydrogel fabrication is badly desirable and still challenging.

The aerospace industry demands high-performance materials that can withstand extreme conditions and maintain efficiency in a variety of applications. Bio-inspired polymer coatings have emerged as a promising approach to meet these demands, by drawing inspiration from natural systems to develop new coatings that exhibit enhanced properties, such as self-cleaning, anti-icing, thermal management, and corrosion resistance. In this review, recent developments in the field of bio-inspired polymer coatings for aerospace applications are presented, covering a range of coatings and their respective properties. We discuss the recent developments and applications of bio-inspired coatings, with a focus on their advantages and challenges in aerospace applications. We also highlight the potential for future research and development in this field, including the integration of advanced technologies such as nanotechnology and additive manufacturing. The review aims to provide insights into the current state-of-the-art of bio-inspired polymer coatings for aerospace applications and to inspire further research in this rapidly growing field.

Hydrogels (gels) are attractive tools for tissue engineering and regenerative medicine due to their potential for drug delivery and ECM-like composition. In this study, we use rheology to characterize GelMA/alginate gels loaded with human platelet lysate (PL). We then characterize these gels from a physicochemical perspective and evaluate their ability to transport PL proteins, their pore size, and their rate of degradation. Finally, their biocompatibility is evaluated. We describe how alginate changes the mechanical behavior of the gels from elastic to viscoelastic after ionic (calcium-mediated) crosslinking. In addition, we positively report the release of PL proteins and relate it to the degradation profile of the gels and the biocompatibility of the gels. Thus, the developed gels represent attractive substrates for both cell studies and bioactive materials.

Development of bioresponsive extrudable hydrogels for 3D bioprinting is imperative to address the growing demand for scaffold design and efficient and reliable methods of tissue engineering and regenerative medicine. This study proposed genipin-crosslinked gelatin-hyaluronic acid hydrogel bioink with different amounts of gelatin tailored for 3D bioprinting, focusing on high cell density loading and less artificial extra-cellular matrix (ECM) effect, as well as exploring their potential applications in tissue engineering. The bioresponsiveness of these hydrogel scaffolds was successfully evaluated in different physiological conditions. 3D and four-axis printing of complex structures such as shapes of hollow tube, star, pyramid, and four-axis tubular scaffolds prove the hydrogel’s high extrusion ability and post-printing shape fidelity. Cytocompatibility and high cell density 3D bioprinting using this moderately stable hydrogel exhibit high potential for precise cell-delivery modes in tissue engineering as well as regenerative medicine.

The applicable conditions and scope of the underground sewage treatment plant include small amount of sewage, less available land on the ground, special requirements for the above-ground landscape, low groundwater level, easy-to-excavate geology, and the buried depth of the sewage return pipe is not very large. It is not under the main road, has certain distance from residential buildings, is not a depression and does not accumulate rainwater, and the sewage discharge requirements are not very strict. The underground sewage treatment plants are suitable in an area, where thermal insulation needs to be considered, less requisitionable land area, and higher environmental requirements The results of underground landscape design study showed that the design of principles, features, styles, water ecologies, combination between community and ecological friendly, operation and maintenance cost of the underground landscape should be emphasized. The construction of ecological complex will lead the sewage treatment plant exchange from minus assets to the ecological positive assets, which will meet the needs of future urban social economic development and environmental protection. The results of development direction exploration study showed that innovation on design concept, breakthroughs of key sewage treatment technology and variation of investment and operation mode can reduce the land occupation investment and operation cost, and the underground sewage plant with large scale and semi-underground mode owes broader prospects for development.

Product assembly is usually one of the last steps in the entire production process. This activity is typically entrusted to assembly workers because it is generally not possible to automate every type of product. For complex products, assembly can take a long time until the fitter learns the procedure and is able to assemble the product on his own. This contribution presents a cus-tom-developed system that enables controlled assembly of the extruder and can be used for complex and diverse products. The system serves to guide the fitter precisely and shows him which part to use at which time. The proposed system will show and describe on the display all necessary assembly steps and parts. Two-step verification is used to ensure that the correct part is picked from the stack. The contribution is supported by the implementation of a case study in a small company with a sample of 30 employees, which demonstrates that the proposed system shortens the extruder assembly time and significantly reduces the error rate. The presented solution is scalable and flexible, as it can be easily adapted to display the assembly steps of another product.

3D bioprinting is the process of manipulating cell-laden bioinks to fabricate living structures. 3D bioprinting techniques have brought considerable innovation in biomedicine, especially in the field of tissue engineering, allowing the production of 3D organ and tissue models for in vivo transplantation purposes or for in-depth and precise in vitro analyses. Natural-derived hydrogels, especially those obtained from the decellularization of biological tissues, are promising bioinks for 3D printing purposes, as they present the best biocompatibility characteristics. Despite this, many natural hydrogels do not possess the necessary mechanical properties to allow a simple and immediate application in the 3D printing process. In this review, we focus on the bioactive and mechanical characteristics that natural hydrogels may possess to allow efficient production of organs and tissues for biomedical applications, emphasizing the reinforcement techniques to improve their biomechanical properties.

Vehicle safety promises to be one of the Advanced Driver Assistance System (ADAS) biggest benefits. Higher levels of automation remove the human driver from the chain of events that can lead to a crash. Sensors play an influential role in vehicle driving as well as in ADAS by helping the driver to watch the vehicle’s surroundings for safe driving. Thus, the driving load is drastically reduced from steering as well as accelerating and braking for long-term driving. The baseline for the development of future intelligent vehicles relies even more on the fusion of data from surrounding sensors such as Camera, Lidar and Radar. These sensors not only need to perceive in clear weather but also need to detect accurately adverse weather and illumination conditions. Otherwise, a small error could have an incalculable impact on ADAS. As most of the current study is based on indoor or static testing. In order to solve this problem, this paper designs a series of dynamic test cases with the help of outdoor rain and intelligent lightning simulation facilities to make the sensor application scenarios more realistic. As a result, the effect of rainfall and illumination on sensor perception performance is investigated. As speculated, the performance of all automotive sensors is degraded by adverse environmental factors, but their behaviour is not identical. Future work on sensor model development and sensor information fusion should therefore take this into account.

Considering the dynamic stall effects in engineering calculations is essential for correcting the aerodynamic loads acting on wind turbines, both during power production and stand-still cases, and impacts significantly the turbine aeroelastic stability. The employed dynamic stall model needs to be accurate and robust for a wide range of airfoils and range of angle of attack. The present studies are intended to demonstrate the performance of a recently implemented "IAG dynamic stall" model in a wind turbine design tool Bladed. The model is transformed from the indicial type of formulation into a state-space representation. The new model is validated against measurement data and other dynamic stall models in Bladed for various flow conditions and airfoils. It is demonstrated that the new model is able to reproduce the measured dynamic polar accurately without airfoil specific parameter calibration and has a superior performance compared to other models in Bladed.

The main objective of this work is the design and implementation of self-adaptive capabilities in wireless sensors by applying control engineering and model-based design methodologies. It has been addressed the problem related to the changes in the flow of data packets through the network connection and the excess energy consumption that this causes in these devices. To design the solution, a systemic characterization of the scheduling and execution process of embedded tasks on the device has been carried out. This means defining cause-effect relationships in the system and its modelling theoretically and/or experimentally. In turn, these models facilitate the design of control strategies to improve the dynamic behavior of the system. As a solution, a self-adaptation strategy based on feedforward control algorithm has been designed and developed, which has been applied to improve the dynamic behavior and resource consumption. The developed solution has been satisfactorily evaluated experimentally.

The goal of the next generation World Wide Web is machine readability through linked databases. To improve web search, integration, and mining in local languages like Urdu, there is a growing need to develop ontologies and vocabulary in these languages. The majority of people use the web in local languages for agriculture, social media interaction, news, etc. How to create agents for the integration of web data. In our country, the literacy ratio is very low and IT literacy is negligible. More comprehensive information for its target audience is only possible through the World Wide Web. Our first target is to improve and enhance the use of social media and the web in local languages. That will encourage its constructive use in Urdu for society and the economy. The Web in natural languages is the source of income for small and medium enterprises. The semantic web is concerned with linked databases and structured data. In this work, we are focused on some selected ontologies to be translated into natural languages. Expertise in Ontology Engineering helps us in job production. Ontology Engineering has extensive freelancing opportunities. Only if the web is correctly interpreted in regional languages is an economic boost achievable. A standardized foundation for data sharing and reuse on the internet is provided by the Semantic Web. In other words, a group of standards and technology that enables computers to comprehend the semantics (meaning) of material on the Web.

Within the past decade, the aerospace engineering industry has evolved outside the constraints of using single, large, custom satellites. Due to increased reliability and robustness of commercial off the shelf (COTS) printed circuit board (PCB) components, missions instead have transitioned towards deploying swarms of smaller satellites. This approach significantly decreases the mission cost by reducing custom engineering and deployment expenses. Nanosatellites are able to be quickly developed with a more modular design at lowered risk. The Alpha mission at Cornell Space Systems Studio is fabricated in this manner. However, for the purpose of this mission, only one satellite was initially developed. This manuscript will discuss a systems engineering approach to the development of this satellite. As a disclaimer, this manuscript is written from a systems perspective. Therefore it will follow many subsystems from a wide range of functionalities. The research in this manuscript was kept broad with the hope to contribute to the mission as a system, through a range of development phases including validation and verification of existing methods. The two systems that will be primarily focused on are the Attitude Control System (ACS) of the carrier nanosatellite (cubesat), and the RF communications on the ex-creted picosatellites (chipsat). Milestones achieved in chipsat RF include chipsat to chipsat communication, chipsat to SDR ground station communication, packet creation, error correction, appending a preamble, and filtering the signal. Achievements on the ACS side included controller traceability/verification and validation, software rigidity tests, hardware endurance testing, Kane damper and IMU tuning. These developments matured the technological readiness level (TRL) of our systems in preparation for satellite deployment.