This study aimed to analyze the effect of a flow training program based on mindfulness applied to young and adult elite handball athletes. A quantitative, quasi-experimental, descriptive data analysis approach was carried out. The sample included 105 athletes (51 female and 54 male). The athletes were divided into two groups: i) experimental (n = 53) and ii) control (n = 52). The results of the repeated ANOVA indicated that the experimental group achieved significant improvements compared to the control group in decision making (n2p=.086), mental well-being (n2p=.045), dispositional flow state (n2p=.103), non-judgment (n2p=.040), refocusing (n2p=.052) and mindful trait in daily life (n2p=.058). In the linear regression test, the factor non-judgment was identified as a predictor of decision making (F(103)=7.99, p=.006) and the predictor for the mental well-being were dispositional flow state (F(102)=29.2, p

Multi-board electronic cases with high density and high power modules are widely used in industrial power supply management. With the improvement of case performance and miniaturization requirements, heat dissipation becomes one of the important factors to be considered in the design process. First,The existing small electronic thermal design methods focus on heat dissipation structure or heat source layout optimization,and ignores on-load test for modeling analysis. Second,The selected power module has on-load power consumption, resulting in relatively low calorific value and the effectiveness of thermal design cannot be verified. Third, The thermal lacks Intelligent monitoring and feedback control mechanism. In order to solve these problems, this paper designs a kind of heat dissipation case with intelligent temperature control based on high-power and high-density power supply array. Based on the extremely miniaturization design principle, we adopt the composite heat dissipation mode based on conduction and supplemented by forced air cooling . The case is made of magnesium and aluminum alloy with a perforated design. Finally, we compare and analyze with the existing cooling design. The results show that the case is smaller in volume, and the cooling performance parameters are slightly better than the existing case. Under the condition of high-density and high-power design, The output power of the whole system is not less than 10kw and the lowest packing-level density is not less than 47w/cm2 with high reliability, portability and practicability. It also provides technical support and prototype support for the standardized design of similar power arrays.

Banks have enormous potential in supporting the achievement of sustainable development goals (SDGs) in accordance with their function as financial intermediaries through sustainable lending. However, the average national financing growth for the sustainable business activity category over the past four years is still 12%. The aim of this research is to identify the conditions of sustainable lending at state-owned conventional banks and analyze the influence of the value chain, economic performance and ESG performance on sustainable lending. The research was conducted at state-owned commercial banks in Indonesia. The research utilized a Structural Equation Modeling (SEM). The SEM results of this study describe value chain, ESG performance (environmental, social and governance) and economic performance have direct and positive influences on sustainable lending, of which ESG performance has the biggest influence. As per individual aspect, social orientation gives the biggest contribution toward sustainable lending.

Risk management strategies protect the company as a whole as well as employees from unforeseen financial impacts. As in the case of personal finance, preparing for certain scenarios helps to face any difficulties that the company may encounter and allows it to get out of this impasse.For any project to be successful, the way the project executing agency will deal with potential risks must be determined so that it can identify, mitigate or avoid problems when it needs to do so. Successful project managers realize that risk management is important, because the achievement of project objectives depends on planning, preparation, results and evaluation that contribute to the achievement of strategic goals, especially the sustainable development of societies.Risk management strategies work to protect the company as a whole as well as employees from unexpected financial effects, and as is the case in personal finance, preparing for certain scenarios helps to face any difficulties that the company may face and allows it to get out of this impasse.To ensure the success of your project, determine how you will handle potential risks so that you can identify, mitigate or avoid problems when you need to do so. Successful project managers understand that risk management is important, because the achievement of project objectives depends on planning, preparation, results, and evaluation that contribute to the achievement of strategic objectives.

Covid-19 is a disease caused by SARS-CoV-2, which has spread worldwide since the beginning of 2020. Several pharmaceutical and non-pharmaceutical strategies were proposed to contain the virus dissemination, including vaccination and lockdowns. One of the consequences of the pandemic was the denial or delay of access to convenient health care services, but also potentially the increase of adverse events within those services, like the number of hospital infections. Therefore, the main question here is: What happened to the performance and sustainability of hospitals? The main goal of this work was to test if the Portuguese public hospitals' performance has been affected by the SARS-CoV-2 pandemic. We used the Benefit-of-Doubt method integrated with the Malmquist Index to analyze the performance evolution over time. Then, we employed a multiple regression model to test whether some pandemic-related variables could explain the performance results. We considered a database of 40 Portuguese public hospitals evaluated from January 2017 to May 2022. The period 2017 to 2019 corresponds to the baseline (pre-pandemic), against which the remaining period will be compared (during the pandemic). We also considered fourteen variables characterizing hospital quality, divided into three main performance definitions (efficiency and productivity; access; safety and care appropriateness). As potential explanatory variables, we consider seven dimensions, including vaccination rate and the need for intensive care for Covid-19 infected people. Results suggest that Covid-19 pandemic features help explain the drop on access after 2020, but not the evolution of safety and appropriateness of care, which surpris-ingly increased the whole time.

The paper deals with the design of a systematic procedure for implementing strategy changes into internal business processes for a project-oriented production type of organization. In the first part of the contribution, a summary of the theoretical starting points for the field of strategic management and change management is presented. In the second part, the contribution deals with the analysis of the current situation in the area of the impact of the change of strategy on the management of business processes. In the last part, the proposal of the procedure for implementing strategy changes into internal business processes and the verification results are presented. The proposed procedure includes steps where the selection and verification of key performance indicators at individual levels of management plus the quantification of the impact of the change in strategy on the processes takes place. The management can thus monitor and evaluate the chosen processes in accordance with the fulfilment of the chosen strategy of the company. The last chapter presents the verification of the proposal for the systematic introduction of changes into the processes.

This paper presents preliminary operational performance results of a pilot grid-connected photovoltaic (PV) system designed and installed on the rooftop of the Ministry of Petroleum, Energy and Mining headquarter in Nouakchott (latitude of 18.1°N and the longitude of 16.0°W), Mauritania. The aim is for the government to demonstrate the relevance of using solar energy and to encourage the uptake of solar PV technology for commercial and residential building applications in Mauritania.. In this study, the grid-connected PV system has a peak power of 48 kW and the performance monitoring was carried out during one year, with a system that allow to measure DC power, inverter and system conversion efficiency, energy generated by the PV arrays, solar radiation in the inclination plane of panels, ambient temperature and module temperature. During this period, the PV plant was found to supply 65,668 kWh to the grid. The final yield ranged from 3.91 to 5.09 kWh/kWp/day. The performance ratio was found to vary from 69.69% to 89.35% and the annual capacity factor was found to be 19%. Finally, performance parameters were compared with other PV plants installed in the same region of Northern Africa. The outcome of this work is deemed important in assisting accurate PV system design and decision-making.

Super-high (x400) magnification dermoscopy (D400) is a new non-invasive imaging technique that has been shown to add information for the differential diagnosis of melanocytic lesions in a pilot study. Our study aimed to confirm if D400 can add details for the discrimination of clinically atypical nevus and melanoma. This is a retrospective observational, multicentric study enrolling patients who received an x20 (D20) and x400 (D400) magnification dermoscopic examination of pigmented skin lesions. Dermoscopic images were retrospectively evaluated by three observers for the presence/absence of nine D20 and twenty D400 dermoscopic features defined in the previous pilot study. Univariate and multivariate analyses were carried out to find predictors of benign and malignant behaviors. At D20 atypical pigment network, blue-whitish veil, atypical vascular pattern, regression, and homogenous pattern were more frequent in melanoma than in nevi (p<0.001). At D400 melanoma showed more frequently than benign lesions melanocytes with an irregular arrangement and irregular in shape and size (p<0.001). Network with edged papillae was more frequent in benign lesions than melanomas (p<0.001). Our study confirms that D400 can identify melanocytes with an irregular arrangement and irregular in shape and size in melanomas, adding information to the conventional D20 examination.

Chitosan (CTS) is widely used in agriculture as a soil amendment, plant growth regulator and promoter of cold resistance. However, the effects of CTS on strawberry seedlings under the combined stress of high-temperature and high-light are unclear. In this study, Xuelixiang strawberry was used as a test material, and 100 mg·kg-1 CTS solution was sprayed onto the leaves. We measured the chlorophyll content, membrane peroxidation, reactive oxygen species content, antioxidant enzyme content, AsA-GSH cycle activity and other related indicators of strawberry seedling leaves under the combined stress of high-temperature and high-light and found that CTS can increase the contents of antioxidants, increase the contents of osmotic adjustment substances, increase the activity of antioxidant enzymes activity,; remove reactive oxygen species over time, reduce the damage of reactive oxygen species to photosynthetic organs and cell membranes, and improve the photosynthesis efficiency of leaves of strawberry plants under high-temperature and high-light stress, thereby reducing damage to strawberry seedlings caused by high-temperature and high-light.

In-situ injection of steam for heating of the subsurface is an efficient method for the recovery of oil and gas from oil shale where permeability typically evolves with temperature. We reported measurements on Jimusar oil shales(Xinjiang, China) at different temperatures to 600℃ and under recreated in situ triaxial stresses to obtain permeability evolution with temperature and stress. Permeability of tight oil shales evolves with temperature to a threshold temperature and peak temperature. The threshold temperature was subjected to triaxial stresses. For Jimusar oil shale, the threshold temperature ranges from 200℃ to 250℃ at ground stress of buried depth of 500m and from 350℃ to 400℃ at buried depth of 1000m. The peak temperature was almost not subjected to triaxial stress and the range is from 450℃ to 500℃ for all Jimusar samples. Pyrolysis plays an important role in permeability evolution and fundamentally changes permeability tendency and magnitude. At high temperature permeability exhibits a little reduction due to stress effect but still remains a high level due to pyrolysis. The above results show that oil shale mass can change from tight porous media into highly permeable media and oil & gas can easily flow through oil shale stratum.

This study investigated the impact of sustainability reporting on financial performance, with a focus on companies in the Turkish food, beverage and tobacco and textile, wearing apparel and leather sectors. The sustainability reports of 48 companies listed on the Istanbul Stock Exchange for 2022 were studied, and the quality of sustainability practices was determined by using a general index (Sustainability Reporting Disclosure Quality Index (SRDQI)) and three partial indices (Environmental Disclosure Quality Index, Social Disclosure Quality Index, and Corporate Governance Disclosure Quality Index (CGDQI)). To analyze the relationships between financial performance and sustainability practices two types of regression models were developed, based on which eight models were directly examined. The results indicate the complete absence of a statistically significant impact of SRDQI on all financial performance measures used. Among the partial indices, only CGDQI has a significant positive effect on the Assets Turnover Ratio. An analysis of the influence of control variables shows a multidirectional dependence of individual financial performance measures on the size of companies, their age, industry affiliation, as well as on the structure of capital used. Finally, this study provides directions for improving the institutional environment of sustainability reporting for Turkish companies.

Asphalt binder is a temperature sensitive material, whose performance is greatly affected by the climate change of the environment. Improper selection of asphalt will cause a lot of damage and affect the durability of the road. The establishment of asphalt pavement performance zoning in Xinjiang, a vast area with great temperature difference, will provide reference for the selection of asphalt suitability, the refinement of pavement design and the sustainable development of road engineering. In this study, 11 years of temperature data in Xinjiang region were collected and analyzed, and 98% reliability of pavement design temperature was used to draw a performance grading map of asphalt pavement in Xinjiang region based on ArcGIS platform. Finally, Xinjiang region was divided into 9 performance zones. At the same time, the performance grade (PG) of five kinds of asphalt binders in Karamay were explored. The result shows that there is little difference in continuous PG span between different matrix asphalt binders, the lower penetration grade, the better high temperature performance, the worse low temperature performance. After adding SBS modifier, the continuous PG span can be higher than the matrix asphalt in 20 ℃. All these provide the basis for reasonable selection of asphalt binders in different areas of Xinjiang.

Performance appraisal is a fundamental indicator in public accountability to achieve the good governance principles. Hence, this study aims to analyze the performance measurement that can improve performance on government agencies in South Sulawesi, Indonesia. The study was conducted in qualitative approach. The research found that non-integrated models of performance measurement in South Sulawesi are inefficient and ineffective. Inefficiency happens because it uses time and cost resources separately, while being ineffective is because both models focuses on each goal instead on performance goals and the process is not supported by the actual management.

Clustering is an important task in data mining that has become more challenging due to the ever-increasing size of available datasets. To cope with these big data scenarios, a high-performance clustering approach is required. Sparse grid clustering is a density-based clustering method that uses a sparse grid density estimation as its central building block. The underlying density estimation approach enables the detection of clusters with non-convex shapes and without a predetermined number of clusters. In this work, we introduce a new distributed and performance-portable variant of the sparse grid clustering algorithm that is suited for big data settings. Our compute kernels were implemented in OpenCL to enable portability across a wide range of architectures. For distributed environments, we added a manager-worker scheme that was implemented using MPI. In experiments on two supercomputers, Piz Daint and Hazel Hen, with up to 100 million data points in a 10-dimensional dataset, we show the performance and scalability of our approach. The dataset with 100 million data points was clustered in 1198s using 128 nodes of Piz Daint. This translates to an overall performance of 352TFLOPS. On the node-level, we provide results for two GPUs, Nvidia's Tesla P100 and the AMD FirePro W8100, and one processor-based platform that uses Intel Xeon E5-2680v3 processors. In these experiments, we achieved between 43% and 66% of the peak performance across all compute kernels and devices, demonstrating the performance portability of our approach.

High-strength wastewaters from a variety of sources, including the food industry, domestic septage and landfill leachate, are often hauled to municipal wastewater treatment plants (WWTPs) for co-treatment. Due to their high organic loadings, these wastewaters can cause process upsets in both the WWTP’s liquid and solids treatment trains and consume organic treatment capacity, leaving less capacity available to service customers in the catchment area. A novel pre-treatment method, the Waste Activated Sludge-High Rate (WASHR) process, is proposed to optimize the co-treatment of high-strength wastewaters. The WASHR process combines the contact stabilization and sequencing batch reactor processes. It utilizes waste activated sludge from the municipal WWTP as its biomass source, allowing rapid start-up. Bench scale treatment trials of winery wastewater confirm the WASHR process can reduce loadings on the downstream WWTP’s liquid treatment and solids treatment trains. A case study approach is used to confirm the economic viability and environmental sustainability of the WASHR process compared to direct co-treatment using life cycle cost analyses and greenhouse gas emissions estimates.

The importance of this study may be defined by using the smart techniques to earned value indicators of residential buildings projects in Republic of Iraq, only one development intelligent forecasting model was presented to predict Schedule Performance Index (SPI), Cost Performance Index (CPI), and To Complete Cost Performance Indicator (TCPI) are defined as the dependent. The approach is principally influenced by the determining numerous factors which effect on the earned value management, that involves Iraqi historical data. In addition, six independent variables (F1: BAC, Budget at Completion., F2: AC, Actual Cost., F3, A%, Actual Percentage., F4: EV, Earned Value. F5: P%, Planning Percentage., and F6: PV, Planning Value) were arbitrarily designated and satisfactorily described for per construction project. It was found that ANN has the capability to envisage the dust storm with a great accuracy. The correlation coefficient (R) has been 90.00%, and typical accuracy percentage has been 89.00%.

Background Although high-density lipoprotein has cardioprotective effects, the association between serum high-density lipoprotein cholesterol (HDL-C) and hypertension is poorly understood. Objective We investigated whether low and high concentrations of HDL-C are associated with hypertension using a large healthcare dataset. Methods In a community-based cross-sectional study of 1,493,152 Japanese people aged 40–74 years who underwent a health checkup, blood pressures and clinical parameters, including nine HDL-C concentrations (20–110 mg/dL or over) were investigated. Results A crude U-shaped relationship was observed between the nine HDL-C concentrations and blood pressure in males (n = 830,669), while a left-to-right inverted J-shaped relationship was observed in females(n = 662,483). An age-adjusted logistic regression analysis showed J-shaped relationships (left-to-right inversion in females) between HDL-C and odds ratios for hypertension (≥140/90 mmHg), with lower limits of 60–79 mg/dL in males and 90–99 mg/dL in females, which were unchanged after adjusting for smoking, habitual exercise, alcohol consumption, and pharmacotherapy for hypertension, dyslipidemia, and diabetes. However, further adjustment for body mass index and serum triglyceride concentration revealed latent positive linear associations between HDL-C and hypertension, although the association between extremely high HDL-C (≥100 mg/dL) and hypertension was attenuated in non-alcohol drinkers. Conclusion Both low and extremely high HDL-C concentrations are associated with hypertension. The former association may be dependent on excess fat mass, which is often concomitant with low HDL-C, whereas the latter association may be dependent on frequent alcohol consumption.

Background: Choline is an essential nutrient required for proper cell functioning. Due to its status as a precursor to acetylcholine, an important neurotransmitter connected to cognition and neuromuscular function, maintaining or enhancing choline levels is of interest. Supplementation with alpha-glycerylphosphorycholine (A-GPC) can maintain choline levels, but its ability to offer support towards cognition remains an area of ongoing research. Methods: Using a randomized, double-blind, placebo-controlled, crossover approach, 20 resistance-trained males (31.3 ± 11.0 years, 178.6 ± 7.3 cm, 84.6 ± 11.4 kg, 15.4 ± 5.6 % fat) consumed either a placebo (PL), 630 mg A-GPC (HD), or 315 mg (LD) A-GPC (GeniusPure™, NNB Nutrition). After resting hemodynamic assessments, participants took their assigned dose and had cognitive assessments (Stroop, N-Back, and Flanker), visual analog scales, and hemodynamics evaluated 60 minutes after ingestion. All participants then warmed-up and completed vertical jumps and bench press throws before completing a bout of lower-body resistance exercise (6 x 10 repetitions using the Smith squat at a load of 70% 1RM). Venous blood was collected 5, 15, 30, and 60 minutes after completion of the squat protocol to evaluate changes in growth hormone and follow-up visual analog scales and cognitive measurements were evaluated 30 minutes after completing the exercise bout. Results: When compared to PL, changes in Stroop total score were statistically greater after HD (13.0 ± 8.2 vs. 5.2 ± 9.0, p = 0.013, d = 0.61) and LD (10.8 ± 7.7 vs. 5.2 ± 9.0, p = 0.046, d = 0.48) administration in addition to significantly faster times in completing the Stroop test in the HD group when compared to PL (-0.12 ± 0.09s vs. -0.05 ± 0.09s, p = 0.021, d = 0.56). No significant differences between groups were found for the Flanker and N-Back assessments while a tendency was observed for HD to have faster reaction times when compared to PL during the Flanker test. No groups differences were realized for visual analog scales, physical performance, or growth hormone. Statistically significant changes in heart rate and blood pressure were observed in all groups, with all recorded values aligning within clinically accepted normative values. Conclusions: HD and LD A-GPC supplementation significantly increased cognitive performance in a group of young, healthy males as measured by changes in the Stroop Total Score and completion time of the Stroop test. These results extend the previously published research which indicated that A-GPC can augment cognition in clinical populations to healthy individuals undergoing acute exercise stress.

Background: Monitoring the mobility of players during wheelchair sports is essential to support coaches in their understanding of the activity and in their training programming. However, the amount of information available from the monitoring tools, combined with a general approach to processing and a poor presentation of the data to the coaches, is not effective and remains unused. Thus, this study aimed to propose a simple and efficient algorithm for identifying locomotor tasks (static, forward/backward propulsion, pivot/tight/wide rotation) during wheelchair movements based on wheelchair kinematic data. Methods: A total of 36 wheelchair tennis and badminton players participated, completing at least one of three proposed tests: the star test, the figure-of-eight test, and the forward-backward test. Locomotor tasks were identified using a five steps procedure including data reduction, symbolic approximation and pattern logical search. Results: Using this method, 99% of locomotor tasks were properly identified for the star test, 95% for the figure-of-eight test and 100% for the forward-backward test. Conclusion: This method appears to be a valuable tool for a simple and clear identification and representation of locomotor tasks over extended periods of time. Future research should aim at applying this method to multiple wheelchair court sports matches or daily life declination.

Surfing is a growing, high participation recreational and competitive activity. It is relatively unique being performed on, in, and through water with a range of temperatures. In other sports, warm-up and heat retention have proved useful at augmenting performance and ameliorating injury risk. Little work has been done examining this in surfing. The purpose of this work was to measure thermal profiles in surfers with and without warm-up and passive heat retention, and secondarily to assess any potential influence on free surfing. A repeated measures pre- and post- design was adopted whereby participants surfed in an artificial wave pool following an active warm-up combined with passive heat retention (experimental condition), and after no warm-up (control). Core body temperature was measured both occasions. Our results showed a clear advantage to body temperature for the experimental condition versus control. Both groups showed a warm-up effect in the water itself, presumably due to further activity (e.g. paddling) and wetsuit properties. Finally, performance trended to being superior following warm-up. We conclude, body warmth in surfers may be facilitated by an active warm-up and passive heat retention. In free surfing this is associated with a trend towards better performance; it may also reduce injury risk.

Background: Manoeuvres esbarrada and volta sobre patas are fundamental movements in equestrian activities, yet their kinematics remain largely unexplored. Objectives: This observational study aimed to kinematically describe the movements of esbarrada and volta sobre patas in Criollo breed horses. Methods: Kinematic analysis was conducted on 31 Criollo horses executing esbarrada and volta sobre patas manoeuvres. Results: The esbarrada maneuver covered a distance of 4.28 ± 0.99m in 1.15 ± 0.11s at a velocity of 3.77 ± 0.55m/s. Angular kinematic variables revealed specific joint angles during the maneuver. In volta sobre patas, significant differences were found in spin duration and thoracic limb suspension between the first and second spins. Conclusions: Volta sobre patas demonstrated prolonged spinning duration and increased thoracic limb suspension in the second spin. Additionally, static conformation did not correlate with limb protraction angles during esbarrada.

The main purpose of the study was to study the effects of a specific rowing ergometer training program on the athletic performance of young adolescents (n=56; 11.73 ± 1.4 years old) com-pared to a workout based on general strength training. Eight-week training program was im-plemented, with four sessions per week and two-hours per session. Sample was divided in two groups: a control group (CG) that performed circuit training with exercises aimed at building general strength and an experimental group (EG) who focused on specifically training on a rowing ergometer (rowing machine). The data obtained in a rowing meter test over the compe-tition distance were analyzed to obtain the average power attained (W) at the beginning of the training, at the middle (4 weeks), at the end of the training (8 weeks) and one year after the ex-perimentation. The results show that, although both forms of training improve the average W obtained in both categories, the EG subjects (+29.94W) obtained better averages in all phases of the study compared to the CG (+5.88W). Furthermore, this increase was greater in male rowers (+ 34.06W) than in female rowers (+24.54W). These results reveal that a specific rower rowing ergometer training program has a significant effect than a general strength program and these effects can even be observed a year after the intervention.

The medical sector is of the utmost importance in every country for well-known reasons such as their economic development, national security, quality of life, and so on. Many researchers were dedicated to this topic, however, in Romania there are limited studies on this subject. One reason is that most of the businesses in this sector are individual enterprises or small family businesses. In our research paper we deploy several analysis methods to see the financial sustainability of companies operating in the medical industry. By analyzing a sample of 23931 companies and we have concluded that their performance has increase in the peak of the pandemic and that the financial stability is high. Our results are in line with other similar studies that were conducted in other regions.

Non-compliant (NC) structures are often encountered in building construction in developing countries. This is a condition whereby erected buildings do not follow regulatory standards, especially in the provision of reinforcements. Therefore, under an earthquake load, the structures do not have sufficient resistance against such load. The structural elements of the building, which often have NC conditions, are the beam-column joints because they do not contain adequate shear reinforcements due to installation difficulty. This study aims to determine the structural performance of the reinforced concrete (RC) frame, which has a reinforcement deficiency in the beam-column joints. Numerical simulation was conducted on the Kakaletsis structure model by modifying the reinforcement details at the joints to represent the NC conditions. The non-linear modeling and analysis of the structural model were carried out using ATENA software. The analysis showed that the reduction in shear reinforcements in the NC model joint caused a decrease in load-carrying capacity by about 26.04%. A shift was also observed in the collapse pattern, i.e., from the beam to the end of the column, causing global failure and reducing the undamaged but increasing more severely damaged condition. This showed that the NC structure, due to the non-conformance of reinforcement, significantly reduced the structure's performance.

This study offers a concise summary of the research that has been done on alternative methods of HRM. A survey of 47 articles on the topic of creative human resource management uncovered three primary schools of thinking. At its core, innovation in HRM entails nothing more than that. One such topic worthy of investigation is the way human resource management approaches new situations. Third, research on inventiveness in the business world has given rise to the concept of "innovative HRM." Each of these three approaches, as well as the theoretical underpinnings of each, will be covered in this article. The note wraps up with a discussion of the significance of the findings for next research as well as clinical practice.

We are in the era where various processes need to be online. However, data from digital learning platforms are still underutilised in higher education, yet, they contain student learning patterns, whose awareness would contribute to educational development. This limits development of adaptive teaching and learning mechanisms. In this paper, a model for data exploitation to dynamically study students progress is proposed. Variables to determine current students progress are defined and are used to group students into different clusters. K-means clustering is performed on real data consisting of students from a South African tertiary institution. Cluster migration is analysed and the corresponding learning patterns are revealed.

The authors propose in this study to evaluate financial performance applications for stock prices of the Indonesian Stock Exchange in manufacturing companies. The method of research used here is a quantitative descriptive method. In that statement, Indonesian Stock Exchange manufacturing companies between 2016 and 2018 are the population use in this research, using the sampling technique Purpose Sampling. This research uses secondary data from 2016 to 2018, the financial reports of Indonesian Stock Exchange manufacturing companies. The Indonesian stock exchange web site has been provided with all data sources at https://www.idx.co.id, and searching for www.google.id. Our analysis shows that book value prices and the net profit margin affect stock prices. The value of financial performance at the Indonesian Stock Bourses manufacturing companies' cost amounts to 64.5 percent, while other factors not listed in this study account for 35.4 percent.

Top performance in team sports attracts the attention from the general public. In particular, the best players became incredibly skilled and physically powerful, a fact that potentiates to deliver a product considered attractive, exciting and competitive. Not surprisingly, this is a very valuable product from an economic and social standpoint, thus, all sports professionals are extremely interested in developing new procedures to improve sports performance. Besides, the great interests of the various stakeholders (owners, CEO-s, agents, fans, media, coaches, players, families and friends) are one of the main reasons for this development of sports science umbrella and the accompanying sports industry. all their personal performances should be coordinated and put into function by the sports team. In this scientific and applied manuscript, we will deal primarily with the individual treatment of players in order to improve their personal performance and, consequently, team sport performance.

With the ever-increasing rate, obesity has become an epidemiological problem throughout the globe comprising about 39% of the world population as of now. Among several reasons, disruption of the gut microbial ecosystem might contribute to the pathogenesis of metabolic disorders, including obesity, metabolic syndrome, type 2 diabetes, and other associated comorbidities. Though the mechanisms related to dysbiosis are unclear, diet might play a modulating role where different dietary approaches manipulate microbial richness and abundance as well as stability. For instance, shifting of Firmicutes and Bacteroidetes ratio in the gut might have a role in association with the dietary approaches and ingestion duration. Along with altered gut microbial composition, microbial metabolites such as short-chain fatty acids (SCFA) after ingestion of non-digestible dietary starches may have an impact on host metabolism by regulating lipogenesis, gluconeogenesis, and inflammation with potential associations to health and obesity. The dietary approaches like carbohydrates, fibre, protein, and/or fat diet at various arrangements can make a shift in the composition of gut microbiota if introduced for a short period. However, the unique pattern of the gut microbes usually remains the same along with the longer period of habitual diet. Though the short-term dietary intervention or circadian rhythm influences a transient change in gut microbes, other than habitual diet, the understanding related to long-term dietary change-induced permanent alterations is minimum. Alternatively, the usage of prebiotics, probiotics as well as postbiotics could be beneficial to overcome dysbiosis. This review highlights the current knowledge and the interaction between the human intestinal microbiota and diet as a modifying factor, in obesity allowing the scientists to uncover novel targets and tools to use as customized therapy.

Corporate Sustainability has garnered increasing attention within the business community, as corporates communicate to influence its stakeholders for building sustainable relationships. There has been a surge in research exploring its connection to firm performance but, existing studies lack a cohesive and concentrated approach. This study employs scientometric and bibliometric methods to analyse scientific production which signals a scarcity of research from developing countries, indicating a need for greater investigation. Focussing on specific subfields of Corporate Sustainability and Firm Performance, we analyze and narrow down the scope of our study to a focussed sample. Employing use of structured methods and PRISMA Protocol, this scientifically rigorous study, points towards identification of research themes linking sustainability practices to firm performance for achieving business excellence. It goes beyond mapping of literature, thereby establishing linkages to Sustainable Development Goals (SDGs). Our analysis reveals clusters centered on Environmental Performance, Firm Performance, Corporate Sustainability Reporting, Corporate Social Performance and Green Supply Chain Management with significant citations related to various SDGs. We make use of time series analysis to determine the future trends of research in the field. This scientometric and bibliometric analysis study contributes to a more focused understanding of the linkages between corporate sustainability and firm performance, emphasizing the need for cohesive research approaches to address the complexities of sustainable business practices and their implications for financial performance and the economy.

The salt marshes, lying at the land-sea temperate interface, furnish a plethora of ecosystems services such as biodiversity niche support, ocean-climate change regulation, ornithology recreo-tourism or plant gathering by hand. They undergo significant worldwide losses due to their conversion into crop fields and to their spatial compression between the rising sea-level and the armoring shoreline. Their monitoring however requires to use a suite of remote sensing sensors to embrace the regional scale while capturing the plant details. This research innovatively adopts a multiscale approach using a cascading spaceborne and airborne process, from the 10-m Sentinel-2, through the 3-m Dove, to the 0.03-m unmanned airborne vehicle (UAV) imageries. The high to very high temporal resolution of the Sentinel-2 and Dove enabled to cover twenties and tens of km2 over five and four years, respectively, in the form of normalized difference vegetation index (NDVI) classes, associated with microphytobenthos, low, medium and high salt marsh vegetation, including the opportunistic Elyma genus. The NDVI was then modelled at the UAV scale (a few km2) using a three-layered NN prediction, providing the final near-infrared (NIR), and the intermediate red, green and blue reflectance imageries, calibrated/validated/tested with the Dove reflectance imageries (R2NIR=0.98, R2red=0.88, R2green=0.84, and R2blue=0.90). The 100fold increase in pixel size allowed to detect the decimeter-scale objects of the tidal flats and salt marshes, to enlarge the NDVI class ranges, and hold great promise to model other spectral bands at the UAV scale for further deeply enhancing the salt marsh mapping.

The cornerstone of molecular magnetism is a detailed understanding of the relationship between structure and magnetic behaviour, i.e. the development of magneto-structural correlations. Traditionally, the synthetic chemist approaches this challenge by making multiple compounds that share a similar magnetic core but differ in peripheral ligation. Changes in the ligand framework induce changes in the bond angles and distances around the metal ions which are manifested in changes to magnetic susceptibility and magnetisation data. This approach requires the synthesis of series of different ligands and assumes that the chemical/electronic nature of the ligands and their coordination to the metal, the nature and number of counter ions and how they are positioned in the crystal lattice, and the molecular and crystallographic symmetry have no effect on the measured magnetic properties. In short, the assumption is that everything outwith the magnetic core is innocent, which is a huge oversimplification. The ideal scenario would be to have the same complex available in multiple structural conformations, and this is something that can be achieved through the application of external hydrostatic pressure, correlating structural changes observed through high pressure single crystal X-ray crystallography with changes observed in high pressure magnetometry, in tandem with high pressure inelastic neutron scattering (INS), high pressure electron paramagnetic resonance (EPR) spectroscopy and high pressure absorption/emission/Raman spectroscopy. In this review, which summarises our work in this area over the last 15 years, we show that the application of pressure to molecule-based magnets can (reversibly): (1) lead to changes in bond angles, distances and Jahn-Teller orientations; (2) break and form bonds; (3) induce polymerisation/depolymerisation; (4) enforce multiple phase transitions; (5) instigate piezochromism; (6) change the magnitude and sign of pairwise exchange interactions and magnetic anisotropy and (7) lead to significant increases in magnetic ordering temperatures.

High-power lasers play an important role in modern science, industry, and medicine. A signifi-cant milestone was reached on December 5, 2022, when Inertial Confinement Nuclear Fusion (ICF) achieved scientific breakeven, releasing more energy than the input laser energy. Additionally, Extreme Ultraviolet Lithography (EUVL) has enabled the development of microchips with 3 nm process nodes, marking a leap in semiconductor technology. These examples together with the recent achievement of a 10 PW (1015 W) laser output heralds remarkable advancements in technology and science soon. Laser systems are broadly classified based on their operating re-gimes into two main categories: Continuous Wave (CW) operation, where the laser is continuously pumped and emits a steady beam of light, and the pulsed regime, in which the laser pro-duces single or multiple pulses at various repetition rates. This review will primarily focus on pulsed laser systems, exploring their various types and recent technological advancements.

Rocks are materials with a wide variety of structures and properties. These can be unprocessed conglomerates of conglomerated minerals as well as crystallized outcrop or metamorphic rocks. Their processing, especially shaping, poses many technological difficulties. Therefore, it is very important to answer the question of how these natural materials yield to high-pressure water jet and abrasive water. It is equally important to determine the effect of key process parameters such as pressure, water nozzle diameter and feed rate on cutting efficiency. The first two parameters determine the water output and power of the jet, while the third determines the jet erosion time per unit volume of material. Their interdependence, using appropriate evaluation indicators, allows to determine the energy intensity of processing and directions for its minimization.

In the recent concrete industry, high fluidity concrete is being widely used for the pouring of dense reinforced concrete. Normally, in the case of high fluidity concrete, it includes high binder contents, so it is necessary to replace part of the cement through admixtures such as fly ash to procure economic feasibility and durability. This study shows the mechanical properties and field applicability of high fluidity concrete that using mass of fly ash as alternative materials of cement. The high fluidity concrete mixed with 50% fly ash was measured to manufacture concrete that applies low water/binder ratio to measure the mechanical characteristics as compressive strength and elastic modulus. Also, in order to evaluate the field applicability, high fluidity concrete containing high volume fly ash was evaluated that fluidity, compressive strength, heat of hydration and drying shrinkage of concrete.

Most of the municipalities in the Gulf region are facing performance related issues in their municipal solid waste management (MSWM) systems. They lack to possess a deliberate inter-municipality benchmarking processes. Instead of identifying the performance gaps for their key components (e.g., personnel productivity, operational reliability, etc.) and adopt proactive measures, the municipalities primarily rely on an efficient emergency response. A novel hierarchical modeling framework, based on deductive reasoning, is developed for performance assessment of MSWM systems. Fuzzy rule based modeling using Simulink-MATLAB was used for performance inferencing at different levels, i.e., component, sub-components, etc. The model is capable of handling the inherent uncertainties due to limited data and imprecise knowledge base. The model’s outcomes can exclusively assist the managers working at different levels of organizational hierarchy for effective decision-making. Performance of the key component, assists the senior management to assess the overall compliance level of performance objectives. Subsequently, operation management can hone in the sub-components to acquire useful information for intra-municipality performance management. While, individual indicators are useful for inter-municipality benchmarking. The model has been implemented on two municipalities operating in Qassim Region, Saudi Arabia. The results demonstrate the model’s pragmatism for continuous performance improvement of MSWM systems in the country and elsewhere.

This paper aims to assess whether the financial performance of Portuguese companies that publish sustainability reports (SR) differs from the financial performance of companies that do not publish SR. We use two methodological procedures. First, we conducted a univariate analysis to test the differences in the financial performance according to the disclosure of SR. Second, we conducted a multivariate analysis using a multiple linear regression that explains financial performance by the disclosure of SR, as well as control variables such as sector, size, leverage, growth, and liquidity. Findings indicate that financial performance of companies that disclose SR does not significantly differ from the financial performance of companies that do not disclose SR. The results are robust to both methodological procedures, as well as to the sample split by sectors.

The background of this research is the environmental sustainability assessments in the aviation ecosystem, particularly concerning airports, are getting significant attention from the industry, regulators, and researchers. A standardized and comprehensive approach is essential for uniformly addressing the global impacts of these assessments across the industry. The main objective of this study is to develop a unique framework that encompasses the requirements of aviation regulators as well as industry and academic metrics, aiming for a standardized approach to environmental sustainability assessments at airports. The methodology used the Sum of Ranking Method to evaluate each environmental indicator precisely. It was applied to five airports globally, providing a diverse testing ground to assess the proposed metrics’ applicability and effectiveness and validate the framework. The results showed that applying the framework across these varied airport environments demonstrated its viability and effectiveness, indicating that it can be successfully applied to different airport realities. The conclusion shows that the developed framework can be successfully applied globally, suggesting that it can be a valid method for international adoption in environmental airport sustainability analysis, offering a standardized approach that could be accepted and utilized worldwide.

The study aimed to investigate the impact of incorporating deep learning strategies in mathematics instruction on students' problem-solving abilities, critical thinking skills, academic achievement, and mathematical skills development. The study population consisted of 280 students, with a sample size of 162 participants. Employing a purely quantitative approach, data collection utilized questionnaires and achievement tests as instruments. Data analysis involved simple linear regression, descriptive analysis, and Pearson correlation. The results of the study revealed that there was no significant enhancement observed in students' problem-solving abilities and critical thinking skills when deep learning strategies were incorporated into mathematics instruction. Additionally, students' attitudes towards deep learning activities in mathematics showed no effect on their academic achievement. Furthermore, students' engagement levels in deep learning activities did not impact their development of mathematical skills. Lastly, the frequency of deep learning activities in the mathematics classroom did not show a significant relationship with students' academic performance. These findings suggest that the implementation of deep learning strategies in mathematics instruction did not yield notable improvements in the specified areas based on the study outcomes.

French academies almost all implement reactivity drills and small-sided games (SSG) the day preceding a match (MD-1). The present study aimed to determine the physical impact of different training durations on MD-1 on the subsequent matchday performance (MD). Eleven elite U19 academy soccer players con-ducted three typical training sessions lasting 45min (TS45), 60min (TS60), and 75min (TS75) on MD-1. Dur-ing TS60, warm-up, reactivity and SSG were 10, 15, and 24min, respectively, plus coaches' feedback or wa-ter breaks. Durations decreased and increased by 25% for TS45 and TS75, respectively. Tests were con-ducted on MD-4 (CONTROL) and MD before the match (TEST). Tests consisted of a counter movement jump (CMJ), 20m sprint, Illinois agility test (IAT), and Hooper questionnaire. CONTROL values were simi-lar over the three experimental conditions. TEST on MD revealed greater CMJ for TS45 (42.7 ± 5.1cm) compared to TS60 (40.5 ± 5.5cm, p=0.032) and TS75 (40.9 ± 5.7cm, p=0.037). 20m time was lower for TS45 (3.07 ± 0.10s, p<0.001) and TS60 (3.13 ± 0.10s, p=0.017) compared to TS75 (3.20 ± 0.10s). IAT time was lower on TS45 (14.82 ± 0.49s) compared to TS60 (15.43 ± 0.29s, p<0.001) and TS75 (15.24 ± 0.33s, p=0.006). Further-more, the Hooper index was lower at TEST for TS45 (7.64 ± 1.50) compared to TS60 (11.00 ± 3.49, p=0.014) and TS75 (9.73 ± 2.41, p=0.045) indicating a better readiness level. We concluded that as training session duration increases, performance decreases on MD. A 45min training session including reactivity and SSG exercises is therefore recommended on MD-1.

The COVID-19 pandemic caused significant training disruptions during the 2020-21 season due to lockdowns, quarantines, and strict adherence to pandemic protocols. The main purpose of this study was to determine how pandemic training restrictions affected training volume and performance in one collegiate swim team. Cumulative training volume data, across a 28-week season, were compared between a pandemic (2020-2021) versus non-pandemic (2019-2020) season. Swimmers were categorized into three groups (Sprinters, Mid-Distance, and Long-Distance) based on training group. Performance times in 25 swimmers who competed in Regional Championships, during both the non-pandemic and pandemic year, were compared via 1-way ANOVA. 26 male and 22 female swimmers commenced the 2020-21 (pandemic) season, with 23% of swimmers voluntarily opting out. Three COVID-19 cases were confirmed (2%) by the medical staff with no long-term effects. Significant reductions in average swim volume were verified in Sprinters (32,867±10,135 vs.14,800±7,995yards;p<0.001), Mid-Distance (26,457±10,692 vs.17,054±9.923yards;p<0.001), and Long-Distance (37,600±14,430 vs.22,254±14,418yards;p<0.001) swimmers (non-pandemic vs. pandemic season, respectively). In the Regional performance analyses, the Sprinters swam faster (n=8;-0.5±0.6secs), while Mid-Distance (n=10;0.17±2.1secs) and Long-Distance (n=7;6.0±4.9secs) swimmers swam slower (F=11.76;p=0.0003;r²=0.52). Thus, the pandemic caused significant reductions in swim training volume, with Sprinters performing better and Long-Distance swimmers performing worse at Regional Championships.

An investigation was carried out to study the effects of television and internet on academic performance of senior secondary schools students in Rigachukun Inspectorate of Kaduna state. A well structured and designed questionnaire was adopted in eliciting information from the respondents. The respondents were sampled from schools within Kaduna state. The information obtained showed that the percentage of senior secondary school students who made use of internet for academic purpose was as much as those who could not operate a computer or even browse the internet. Good number of students applied internet mostly through phones and computer with internet access in solving their assignment. A larger percentage of students devoted their time to watching non-educative programs on television, even though it was discovered that some of them also watch educative programs. Positive impacts of television and internet are however obscuring and not glaring. Investigation carried out revealed that students in senior secondary schools need to be sensitized and oriented on how they can derive the best from internet and television. Schools should be encouraged in using television and internet as an instrument of learning and teaching.

Leadership performance by village leaders is essential to promote sustainable life among rural communities, especially fisheries community who living along coastal villages. Otherwise, previous studies found that performance issues among village’s leaders remain as serious problems, and need to find the best solution. This study was conducted to profile the job performance among village leaders based on demographic factors such as educational level, age and experiences as village leader. The data of this cross-sectional survey were collected by questionnaires on 300 respondents consist of members of village organization through stratified sampling’s technique, while the data was analysed by SPSS using items of mean, standard deviation, independent-sample t-test and anova. The finding shown that there were differences in job performance among village leaders on educational level, age and experiences. Interestingly, the finding told the best on job performance among village leaders are (i) the age between 41 to 50 years old; (iii) the experience between 11 to 20 years; and (iii) the higher educational level the higher job performance among them. This result can be using by government or any responsible parties to improve job performance among village leaders, especially for recruitment selection and for in-service training.

Background.Nurse gives professional nursing service to patients according to competence owned. Based on these services in the end of every year, nurses are given incentives for medical services as financial incentive. Purpose. To analyze the impact of competence training and incentives medical services’ distribution upon the achievement of nurse’s performances in General Hospital of W. Z. Johannes Kupang. Matterial and method. Observational survey research with cross sectional design. Population. Nurses in General Hospital of W. Z. Johannes Kupang. Technique. Total sampling technique with number of samples 183 respondents. Inclusive criteria of samples are willing to be interviewed, nurse’s status, permanent offices without limitation from particular working unit or poly in hospital. Independent variable: (1) competence training; (2) Incentives for medical services. Dependent variable; Nurse’s performance achievement. Variables are measured by using Lickert scale. Information are recorded through questionnaire. Analyzes using linier regression. Result. There are impacts of competence training (α=.000;ß=.489)and distribution of incentives for medical services(α=.012; ß=.152)upon nurse’s performances achievement in General Hospital of Prof.W. Z. Johannes Kupang. Conclusion.The training of nursing service status that could increase competences among nurses with affair incentives for medical services’ distribution simultaneously end up in the increasing of nurse’s performances achievement in a hospital

The study examines how the South African construction industry can nurture an entrepreneur and a large successful entrepreneurial construction company, even though the founder had no formal education and the company was founded during the Apartheid era. The question of whether entrepreneurs are born or are made is based on the age-old question of nurture and nature. The paper presents the narratives of a successful entrepreneur Mr. Sam Lubbe. The narratives presented are collected through a case study research approach. The data collected suggests that although Sam does not have any formal education, he succeeded based on nurturing given to him when he had the opportunity to work for a large South African construction company, his innate characteristics of self-confidence, task-result orientation, originality, future direction, and a unique business model which also helped him access international construction work opportunities.

The main objective was to analyze the influence of silicon content on high-temperature oxidation of low-alloy steels. Samples of AISI 1045, AISI 5160, and AISI 9254 steels, with different silicon contents, were oxidized at an isothermal temperature of 1000°C for times of 20 minutes, 40 minutes, and 60 minutes. The oxide layers formed mainly contain hematite, magnetite wustite, and fayalite. The average thickness of the oxide layer can decrease with an increase in silicon content below 1% but can increase for contents greater than 1% due to the difference in density between fayalite and iron oxides. Silicon tends to accumulate on the surface of steel and form a SiO2 film in the early stages of oxidation, which can control the oxidation process. The eutectic compound FeO+Fe2SiO4 forms at the oxide-steel interface, and its thickness increases with oxidation time and the silicon content present. The SiO2 film tends to decrease with oxidation time and silicon content.

Fatigue performance and self-repairing activity of asphalt binders are two properties that highly influence the fatigue cracking response of asphalt pavement. There are still numerous gaps of knowledge to fill linked with these two characteristics. For instance, current parameters fail to fully accommodate these two bitumen phenomena. This study aims to propose a new procedure to address this issue utilizing the linear amplitude sweep (LAS) test, LAS with rest period (RP) (LASH) test, and simplified viscoelastic continuum damage (S-VECD) model. This research work used four different types of asphalt binders: neat asphalt (NA), self-healing thermoplastic polyurethane (STPU)-modified bitumen (STPB), self-healing poly (dimethyl siloxane) crosslinked with urea bond (IPA1w)-modified bitumen (IPAB), and styrene–butadiene–styrene (SBS)-modified bitumen (SBSB). Before the testing process, all the materials were subjected to short-term and long-term aging. The new procedure showed a superior capacity to analyze and accommodate all bitumen fatigue performances and self-repairing activities compared to the current method. Another finding proved that asphalt binders with higher self-restoration behavior failed to show better fatigue performance. A breakthrough finding demonstrated that asphalt binder fatigue response augmented when the RP was applied at a higher damage intensity (S) value. STPBs and IPABs reached their highest increments of fatigue response, containing 1.0% of STPU and 0.5% of IPA1w, respectively. Those augmentations were 207.54% and 232.64%, respectively.

Conventional heat treatment is not capable of converting a sufficient amount of retained austenite into martensite in high-carbon or high-carbon and high-alloyed iron alloys. Cryogenic treatment induces the following alterations in the microstructures: (i) a considerable reduction in the retained austenite amount, (ii) formation of refined martensite coupled with an increased number of lattice defects, such as dislocations and twins, (iii) changes in the precipitation kinetics of nano-sized transient carbides during tempering, and (iv) an increase in the number of small globular carbides. These microstructural alterations are reflected in mechanical property improvements and better dimensional stability. A common consequence of cryogenic treatment is a significant increase in the wear resistance of steels. The current review deals with all the mentioned microstructural changes as well as the variations in strength, toughness, wear performance, and corrosion resistance for a variety of iron alloys, such as carburising steels, hot work tool steels, bearing and eutectoid steels, and high-carbon and high alloyed ledeburitic cold work tool steels.

Simulator training for image-guided surgical interventions may benefit from artificial intelligence systems that control the evolution of task skills in terms of time and precision of a trainee's performance on the basis of fully automatic feed-back systems. At the earliest stages of training, novice trainees frequently focus on getting faster at the task, and may thereby compromise the optimal evolution of the precision of their performance. For automatically guiding them towards attaining an optimal speed-accuracy trade-off, an effective control system for the reinforcement/correction of strategies must be able to exploit the right individual performance criteria in the right way, reliably detect individual performance trends at any given moment in time, and alert the trainee, as early as necessary, when to slow down and focus on precision, or when to focus on getting faster. This article addresses several aspects of this challenge for speed-accuracy controlled simulator training before any training on specific surgical tasks or clinical models should be envisaged. Analyses of individual learning curves from the simulator training sessions of novices and benchmark performance data of one expert surgeon, who had no specific training in the simulator task, validate the suggested approach.

Chemical flooding methods are used to recover the remaining oil after water flooding, and surfactant-polymer (SP) flooding is an important chemical flooding technology. It is of great significance to design and screen high-performance oil displacement agents in order to overcome the increasingly challenging high temperature (&gt;70 ℃) and high salinity (>10,000 mg/L) reservoirs. Based on the characteristics of high temperature (70 ℃) and high salinity (151,000 mg/L) in the Qinghai Gasi reservoir, the performance of the SP flooding system was studied. This study considered interfacial tension, emulsification, viscosity, compatibility, and oil displacement efficiency. The selected formula demonstrated high resistance to both salinity (151,000 mg/L) and temperature (70 ℃), characterized by a low oil-water interfacial tension (10-2 mN/m) and high viscosity (18.13 mPa.s). After water flooding achieved an oil recovery rate of 64.64%, the subsequent replacement rate of crude oil increased by 26.95%, confirming that SP flooding can be used as a technology for enhancing oil recovery in high-temperature, high-salinity reservoirs represented by Qinghai Gasi reservoirs.

Intended for the high voltage gain and wide-range operation of DC/DC converters for photovoltaic energy storage systems, a topology for four-phase interleaved DC/DC converters for photovoltaic power generation is proposed. This topology increases output voltage for output in series, and reduces the input current ripple by paralleling the input. Compared with traditional boost converter topology, the proposed topology reduces the output current and output voltage ripple, reduces the stress of the switching device, and reduces the withstanding voltage of the output capacitor under the premise of ensuring the boost ratio. Experimental results show that the maximum efficiency of the converter reaches 95.37%. Compared with traditional boost converters, the proposed converter offers obvious advantages in efficiency under the conditions that the output voltage and load are variable.

In response to the growing environmental concerns and sustainability imperatives in the (GCC) and the world in general, companies are increasingly being urged to integrate environmental accountability into their core strategies and operations by accounting for environmental performance in their financial statements and the impact on supply chains and sustainable development. The problem of the study is to identify the impact of environmental accounting disclosure challenges on supply chains and sustainable development in companies. By taking the experiments of 20 companies and representatives of the study community interested in the topic, and using the heuristic research approach through the questionnaire tool and a set of key variables, including the adoption of disclosure on environmental accounting performance (DEAP), supply chain sustainability performance(SP), Sustainable Development Index(SD), and using the (PLS) program, in the statistical analysis, the study reached the most important results: The study revealed a positive relationship between the disclosure of environmental accounting performance, improved supply chains and sustainable development in the companies represented by the study sample in the (GCC), where both financial performance and environmental performance contribute to achieving the Sustainable Development Goals and supply chains. Accordingly, the study recommends many recommendations, the most important of which are: the need for companies to be encouraged to disclose the performance of environmental accounting as a strategic necessity, promote more sustainable supply chain management, improve financial performance, and effectively contribute to achieving the Sustainable Development Goals, thereby enhancing sustainability within companies and across supply chains, the study also recommends the need to continue studies in this aspect, especially in the (GCC) and East Asian countries, to urge companies to disclose the performance of environmental accounting in their financial statements.

This paper introduces a quantitative methodology for assessing drone pilot performance, aiming to reduce drone-related incidents by understanding the human factors influencing performance. The challenge lies in balancing evaluations in operationally relevant environments with those in a standardized test environment for statistical relevance. The proposed methodology employs a novel virtual test environment that records not only basic flight metrics but also complex mission performance metrics, such as the video quality from a target. A group of Belgian Defence drone pilots were trained using this simulator system, yielding several practical results. These include a human performance model linking human factors to pilot performance, an AI co-pilot providing real-time flight performance guidance, a tool for generating optimal flight trajectories, a mission planning tool for ideal pilot assignment, and a method for iterative training improvement based on quantitative input. The training results with real pilots demonstrate the methodology’s effectiveness in evaluating pilot performance for complex military missions, suggesting its potential as a valuable addition to new pilot training programs.

To investigate the composition of caproic acid-producing bacterial communities in sub-high-temperature Daqu, we analyzed four different Daqu samples from Sichuan. After enriching the samples with a specialized medium, we performed high-throughput sequencing of 16S rRNA gene amplicons on the metagenomic DNA from both the Daqu samples and the enrichment cultures. Our analysis focused on identifying and characterizing the caproic acid-producing bacterial communities present in Daqu. The results revealed that enrichment increased both the diversity and abundance of potential caproic acid-producing bacteria in Daqu. The predominant caproic acid-producing bacteria, with a relative abundance greater than 1%, included Clostridium sensu stricto 18 (2.19% to 69.00%), Clostridium sensu stricto 15 (1.76% to 7.65%), as well as smaller amounts of Clostridium sensu stricto 12, Clostridium sensu stricto 1, Clostridium sensu stricto 10, Clostridium sensu stricto 7, and Caproiciproducens. Specifically, Q1 Daqu was characterized by the presence of Clostridium sensu stricto 18 and Clostridium sensu stricto 15. Q2 Daqu featured Clostridium sensu stricto 1, Caproiciproducens, and Clostridium sensu stricto 18. Q3 Daqu included Clostridium sensu stricto 18 and Caproiciproducens. Q4 Daqu contained Clostridium sensu stricto 18 and Clostridium sensu stricto 1. These findings indicate that there are variations in the composition of caproic acid-producing bacterial communities among different sub-high-temperature Daqu samples from Sichuan. This preliminary analysis provides a theoretical basis for further studies on caproic acid bacteria in Daqu and offers insights into the development of high-quality Daqu, which may enhance the quality of Nongxiangxing liquor.

The gas-water relative permeability curve plays a crucial role in reservoir simulation and development for condensate gas reservoirs. In this study, we conducted a series of high temperature and high pressure analysis experiments on real gas cores from Wells A and B in Block L of the Yinggehai Basin to investigate the effects of temperature, pressure, and different types of gas media on gas-water seepage. The experimental results demonstrate that: Temperature has a significant impact on both gas and water relative permeability, particularly on the former. As temperature increases, gas relative permeability shows a substantial increase while water relative permeability remains relatively unchanged. Under the same effective stress, increasing pressure causes downward shifts in both the gas and water relative permeability curves; however, there is a more pronounced decrease in gas relative permeability. Gas type has minimal influence on phase permeability except at higher water saturation where differences become apparent. When water saturation ranges from 80% to 50%, there is no significant variation observed in the measured relative permeability of different displacement gases; however, as water saturation exceeds 80%, distinctions gradually emerge. At bound water saturation conditions, nitrogen exhibits lower relative permeability compared to simulated gases with approximately 92% similarity between them. This investigation into the characteristics of gas-water relative permeability in high temperature and high pressure condensate reservoirs within Yinggehai Basin provides valuable insights for efficient development strategies for similar reservoirs.

This paper presents the design and experimental results of a long cavity length Nd: YAG laser with large stable zone for water jet guided laser (WJGL) applications. The design is based on the light transmission matrix and resonator stability conditions, aiming to achieve a large stable zone and a short cut-off thermal focal length (CTFL). A folded concave resonator is researched to enhance the cavity length, and the influence of the tun-able cavity arm length on the oscillating beam in the resonator and in the YAG crystal is theoretically studied. Moreover, the effects of the output mirror curvature and the cavity arm length on the range of the stable area and the cut-off thermal focal length are also investigated. Experimental results show that a stable green laser output is obtained after second harmonic generation (SHG), with a pulse width ranging from 43ns to 143ns within the laser operating frequency range of 5-20kHz. At an operation frequency of 10kHz, the output power is 21.33W, and the instability of the output power within 400 minutes is 0.88%. The laser source achieves a maximum power of 25.7W at 20kHz, and the maximum single pulse energy reaches 2.7mJ at 6kHz. Finally, this is used as the laser source to couple with a water jet with a diameter of 100 microns, achieving a lossless water conductivity transmission over 60mm length with a peak power density of 0.742GW/cm2. These results demonstrate the suitability of the designed laser source for WJGL technology research.

Indonesia's SUMBAGUT 150 kV transmission of High Voltage Alternating Current Network (HVAC) system has considerable power losses. These power losses are a critical problem in the transmission network system. Meanwhile, this study provides one solution to reduce power losses using a High Voltage Direct Current (HVDC) network system. Determining the location to convert HVAC into HVDC is very important. The authors use Particle Swarm Optimization (PSO) to get the optimal location on the 150 kV SUMBAGUT HVAC transmission network system. The study results showed that before using the HVDC network system, the power losses were 122.26 MW. Meanwhile, power losses with one transmission HVDC in the "Paya Pasir-Sei Rotan" are 84.16 MW, "Porsa-P. Siantar" 90.83 MW, "Paya Pasir-Paya Geli" 104.14 MW. Then power losses with two transmission HVDC in "Paya Pasir-Sei Rattan" and "Porsa-P. Siantar" is 71.24 MW, "Paya Pasir-Sei Rotan" and "Paya Pasir-Paya Geli" 77.46 MW, "Porsa-P. Siantar" and "Paya Pasir-Paya Geli" 78.52 MW. The last result, power losses with three transmission HVDC in "Paya Pasir-Sei Rotan," "Porsa-P. Siantar," and "Paya Pasir-Paya Geli" lost 64.57 MW.

Polyetheretherketone is a promising material for implants due to its good mechanical properties and excellent biocompatibility. Its accessibility to a wide range of applications is facilitated by the ability to process it with an easy-to-use manufacturing process such as Fused Filament Fabrication. The elimination of disadvantages associated with the manufacturing process, such as a poor surface quality, is a main challenge to deal with. As part of the mass finishing process, centrifugal disc finishing has demonstrated good results in surface optimization, making it a promising candidate for post-processing of additively manufactured parts. The objective of this study is to identify the key parameters of the centrifugal disc finishing process on the waviness of additively manufactured PEEK specimen, which has not been investigated yet. Waviness of the specimen was investigated by means of confocal laser scanning microscopy (CLSM), while weight loss was additionally tracked. Six parameters were investigated: type, amount and speed of media, use of compound, amount of water and time. Type of media, time and speed were found to significantly influence waviness reduction and weight loss. Surface electron microscopy images demonstrated the additional effects of deburring and corner rounding. Results on previous studies with specimens made of metal showed similar results. Further investigation is required to optimise waviness reduction and polish parts in a second post-processing step.

A general procedure is described, to generate material parameter sets to simulate fire propagation in horizontal cable tray installations. Cone Calorimeter test data is processed in an inverse modelling approach. Here, parameter sets are generated procedurally and serve as input for simulations conducted with the Fire Dynamics Simulator (FDS). The simulation responses are compared with the experimental data and ranked based on their fitness. The best fitness was found for a test condition of \SI{50}{\kilo\watt\per\meter^2}. Low flux conditions \SI{25}{\kilo\watt\per\meter^2} and less exhibited difficulties to be simulated accurately. As a validation step, the best parameter sets are then utilised to simulate fire propagation within a horizontal cable tray installation and are compared with experimental data. It is important to note, the inverse modelling process is focused on the Cone Calorimeter and not aware of the actual validation step. Despite this handicap, the general features in the fire development can be reproduced, however not exact. The fire in the tray simulation extinguishes earlier and the total energy release is slightly higher as compared to the experiment. The responses of the material parameter sets are briefly compared with a selection of state of the art procedures.

The study explores the link between corporate social responsibility (CSR) and the financial performance of listed firms in the Philippines. This research used a longitudinal approach to investigate data from the Philippine Stock Exchange Index (PSEi) from 2019 to 2022. The environmental, social, and governance (ESG) framework assessed CSR performance, while financial performance was measured using return on equity and stock return. Firm profiles such as industry type, firm size, firm age, and auditor type were used as control variables. The researchers used firms' sustainability, annual, and governance reports as the primary data sources. The regression analysis results show insufficient data to support the idea that CSR performance affects the firm’s financial performance. It shows that only governance performance is positively correlated and significant with return on equity. Other components and overall CSR performance were found insignificant with return on equity and stock return. This study provides preliminary information on the link of CSR to the financial performance of listed firms in the Philippines. It extends the current literature on CSR performance and its link to financial performance in an emerging economy setting.

This study aimed to assess the contribution of organizational and management factors to the performance of Sidama Bunna Football Club. For this study, a cross-sectional survey design was adopted. The study's target population were Sidama Bunna football club players, coaches and club managers (n=44) selected using a comprehensive sampling technique. Key informant interviews and questionnaires were used as instruments. Pearson Product Moment Correlation Coefficient and multiple regression were used to analyze the data at the 0.05 significant level. The result shows that there was a strong positive significant relationship between club performance and human resource (r=0.774**, p&lt;0.01), materials resources (r= 0.697**, p&lt;0.01), finance (r= 0.765**, p&lt;0.001), strategic factors (r= 0.788**, p&lt;0.001), communication (r= 0.779**, p&lt;0.001), whereas there were no significant relationships between club performance and club structure (r=0.263, p&gt;0.05). The findings also confirmed that The R Square value of 0.794 indicates that 79.4% of the variance in club performance is explained by these factors, highlighting the importance of a comprehensive approach that considers multiple dimensions. The Adjusted R Square of 0.760 further supports the model's robustness. The ANOVA results (F (6, 37) = 23.745, p &lt; 0.001) confirm the significant influence of these variables on club performance. In this combined model, Strategic Factors (B = 0.360, p = 0.002) and Finance (B = 0.196, p = 0.054) remain significant, reinforcing their critical roles. However, communication, structure, human resources, and materials resources are not statistically significant in this combined model, indicating that their influence may be overshadowed by the more dominant factors of strategic planning and finance.

This study analyzes groups about game performance elements and sport class composition in each country by utilizing official records provided by major international wheelchair basketball games. To achieve the objective of this study, major game factors were explored by analyzing descriptive statistics in each year regarding the latest trend of sport class composition and playing time of each sport class and conducting the difference test between the groups. To analyze performance details of international wheelchair basketball games, this study selected official records of 209 games of 24 teams that participated in major international wheelchair basketball games. A test for difference also was conducted to examine the sport class composition, playing time, and game details of each group. First, scoring factors directly affecting the game results were compared between the groups. The result of this difference test shows that the success rate of 2-point and 3-point shots was significantly different except for the free throw success rate. The numbers of assists, defense rebounds, and steals were significantly different. Second, the medal group was compared with the other group, the average class of the other group's participation in quarters was higher than that of the medal group and the difference was significant. Regarding the difference between groups in terms of game performance, the difference in playing time between the medal group and the other group was in the order of 2.5 points, 4.0 points, 3.0 points, and 1.5 points. Third, given the general trend in 2012 to 2022 international events, the sport class composition and para-athlete played minutes in quarterly participation changes.

Ensuring adequate food supplies has become a critical issue with a rapidly growing global population and increasing demand for protein-rich foods. In Baghlan province, Afghanistan, many poultry farms have been forced to cease operations due to insufficient infrastructure and resources, leaving a significant gap in meeting the region's growing demand for poultry products. This study aims to identify the key factors affecting the sustainability and development of broiler farms in Baghlan province as perceived by farm owners. The primary research tool was a researcher-developed questionnaire, whose validity and reliability were confirmed. The study population comprised all broiler farm owners in Baghlan Province, from which a sample of 91 was selected using the Morgan table and complete enumeration sampling method. The findings revealed that approximately 54% of respondents expressed moderate satisfaction with their farms. Importance-Performance Analysis (IPA) was conducted to assess the relative importance and performance of various factors affecting the development and sustainability of the farms. The results indicated that having a qualified expert, the farmer's educational level, the poultry house ventilation system, and being a local resident were considered highly important factors for farm success but were underperforming. Based on limited existing research in the region, these findings provide valuable insights for enhancing poultry farm development and food security in Baghlan province and throughout Afghanistan. The study offers specific recommendations for addressing the identified challenges and improving the sustainability of poultry farming in the region.

Successful work performance is an important part of everyday functioning. Different factors could contribute to efficiency at the workplace. Two studies aim to establish how different forms of knowledge transfer at the workplace are related to self-rated work performance and whether better work performance is related to mindfulness as an aspect of cognitive functioning. The participants were 742 working Bulgarians in Study 1 and 259 workers in Study 2. Ten scales were used in Study 1, measuring different forms of knowledge transfer and self-rated work performance, and two scales were used in Study 2, measuring self-assessed work performance and mindfulness. The results revealed that higher self-assessment of work performance correlated positively but weakly with the sharing of tacit knowledge at the workplace, sharing knowledge with colleagues in dyads, work climate encouraging mastership, sharing knowledge in teams, knowledge transfer by means of cooperation between different generations, institutionalized transfer of knowledge, knowledge receiving, and estimated effectiveness of participation in supervision as a supervisee. Some forms of knowledge transfer (sharing of tacit knowledge and sharing knowledge with colleagues in dyads) seemed more closely related to self-assessed work performance than others. Self-assessment of work performance did not correlate statistically significantly with performance motivational climate at work. The different forms of knowledge transfer correlated with each other. Better work performance is related to better cognitive functioning, as the second study of 259 workers additionally revealed that higher self-assessment of work performance correlated with better self-awareness measured by the Mindful Attention Awareness Scale, i.e., more attention focused on own thoughts, emotions, and needs, i.e., on what is happening right now. Interconnectedness between the different forms of knowledge transfer indicates that stimulating one kind of knowledge transfer could also stimulate many other forms of knowledge transfer, but this may happen only when organizations support a mastery-motivated climate at work. Established connections between the different forms of knowledge transfer and self-rated work performance, as well as between self-assessed work performance and mindfulness, suggest that good cognitive functioning accompanied good functioning, and both may be facilitated by knowledge transfer at the workplace.

: This study focused on assessing whether the inclusion of probiotics (B. subtilis) as feed additives during the preweaning stage can enhance the body weight and metabolic condition of neonatal calves. A total of 50 Holstein calves, all born on the same farm, were randomly divided into two homogeneous treatment groups after birth. The probiotic was administered 24 hours post-birth, signifying the start of the experimental period. The Control Group (CG), consisting of 25 calves, was fed with a milk replacer, while the Treatment Group (TG), also with 25 calves, received milk replacer supplemented with 7.5 mL/calf/day of B. subtilis probiotic, in accordance with the manufacturer's guidelines. It took one month to collect the animals. Body weight was measured at birth for all animals. A local veterinarian, working on the farm, conducted daily health checks of the calves, recording health parameters and any antibiotic treatments. Blood samples were collected from each calf at birth and again after 30 days by puncturing the jugular vein, using 10 mL evacuated serum tubes before morning feeding. Significant differences in body weight were observed at 30 days of age (p &lt; 0.05). The CG's average body weight (BW) was 52.71 kg (±10.68), compared to 58.49 kg (±14.21) in the TG, a difference of 5.78 kg or an increase of 9.88%. Additionally, the TG exhibited significantly lower aspartate transaminase (AST) activity at 30 days of age (p &lt; 0.001), with an average of 51.02 IU/L (±5.16) compared to 72.00 IU/L (±12.68) in the CG, a 41.12% decrease. The TG also had a significantly higher average phosphorus (P) concentration (p &lt; 0.001) of 3.27 mmol/L (±0.22), a 9.36% increase over the CG's 2.99 mmol/L (±0.27). A significant increase in gamma-glutamyl transferase activity was observed in the TG compared to the CG (p &lt; 0.001), with a 64.48% (or 26.29 IU/L) increase. The TG's average GGT activity was 40.64 IU/L (±22.43), while in the CG it was 14.35 IU/L (±3.45). Additionally, there was a significant 17.7% decrease (or 10.02 g/L) in total protein (TP) concentration in the TG compared to the CG, with the TG averaging 46.32 g/L (±17.43) and the CG 56.34 g/L (±9.81). Overall, dairy calves who were given conventional milk replacer along with a daily dose of 7.5 mL of B. subtilis probiotic experienced enhanced growth performance and a more favorable metabolic profile. Their body weight exhibited a 9.88% growth, but the activity of AST decreased by 41.12%, suggesting a decreased likelihood of liver damage. Additionally, their protein digestibility was 17.7% greater compared to the control group. In addition, B. subtilis had a positive impact on the overall concentration of phosphorus.

Tennis is an individual sport characterised by high intensity action, including sprints and changes of direction (COD). There is a gap in the knowledge of limb asymmetries in adolescent tennis players and their association with performance. This study aimed to examine the relationship between asymmetry in vertical and horizontal jump tests (CMJ and HJ) and COD with lower limb performance variables in adolescent tennis players. Forty-five adolescent tennis players (age: 13.81 ± 1.08 years; height: 167.64 ± 9.9 cm; body mass: 57.48 ± 10.94 kg; body mass index: 20.27 ± 2.18 kg/m2) performed the CMJ test (unilateral and bilateral), horizontal jumps (unilateral and bilateral), 25 m sprint and 180º COD test. The single-leg countermovement jump showed the greatest asymmetries among the different tests (6.62 ± 9.35%). Significant negative relationships were found between CMJ asymmetry and COD asymmetry with unilateral horizontal jump variables (r = -0.30 to -0.53). In addition, CMJ asymmetry showed significant relationships with CMJR (r=0.49) and COD180R (r=0.29), whereas COD asymmetry showed a significant relationship with COD180L (r=0.40). On the other hand, HJ asymmetry showed no significant relationships with any variable. The main findings of this study indicate that greater imbalances in the CMJ and COD tests are associated with a reduced capacity to perform unilateral horizontal jumps. These results suggest the need to incorporate training protocols that reduce interlimb asymmetries in growing athletes to improve their performance.

Triticale is known for being an alternative energy source to usual cereals such as maize and wheat in poultry nutrition. Several studies suggested opposite results regarding its incorporation as a feed ingredient on laying hens’ production parameters. This article used a meta-analysis to assess the factors influencing the effects of triticale on layers’ performance. In July 2022, papers studying the effect of triticale on layers’ egg production (EP), egg weight (EW), egg yolk color (EYC), feed intake (FI), and feed conversion ratio (FCR) were identified on Google Scholar, PubMed, and Science Direct. According to the eligibility criteria of PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) guidelines, 6 articles were registered and segmented into 16 experiments for our meta-analysis. Overall, the trim and fill method revealed that triticale had similar impacts to conventional cereals on laying hens' performance. However, the meta-ANOVA and the meta-regression emphasized that triticale percentage, triticale strains and laying hens strains could significantly influence the effect of triticale on layers' performance. Indeed, the meta-Anova highlighted that the Hy-Line Brown strain and Joesong and Juanilo triticale strains in-duced the best laying hens’ performance. Moreover, the meta-regression emphasized a positive correlation between the triticale inclusion percentage and the EW in Juanilo triticale diets and a negative correlation between the triticale inclusion percentages and the EYC in the triticale and laying hens strains studied. Even though the funnel plot and the Egger linear test suggested sig-nificant publication bias, the present meta-analysis remains consistent research to understand how certain factors could influence the impact of triticale on layers' performance.

The aim of the present trial was to evaluate the growth performance of buffalo calves fed diets characterized by different forage/concentrate ratio with or without the Saccharomyces Cerevisiae supplementation (CBS 493.94, Yea-Sacc®). Twenty-four male buffalo calves (mean age 145.1 ± 16.1 days; mean weight 108.0 ± 18.7) were assigned randomly to 4 groups, homogeneous for age, fed four different diets: diet 1 F:C ratio 50:50; diet 2 F:C ratio 30:70; diet 3 F:C ratio 50:50 + Yea-Sacc® and diet 4 F:C ratio 30:70 + Yea-Sacc®. Buffalo calves were individually weighted before the start of the experiment and the data were used as a covariate, monthly until the end of the trial. Dry matter intake (DMI), daily weight gain (DWG) and feed conversion ratio (FCR) were calculated. The differences in diets’ composition significantly (p

With the increased emphasis on competition in academic settings, anxiety is becoming more common, which inevitably has some impact on students’ learning process and result. This study aimed to explore how competition-induced anxiety influences the subjective cognitive load (SCL), attention level and test score. Meanwhile, we investigated the mediating role of the behavioral inhibition system/behavioral activation system (BIS/BAS) in those processes. A total of 101 college students were recruited in Study 1 to learn five micro-lectures from massive open online courses (MOOC) under with and without competitive conditions. The results showed that participants’ state anxiety (SA) scores were higher after the experiment, participants in the competition condition had higher test scores, and the relationship between SA/ trait anxiety (TA) and SCL could be mediated by the BIS. To obtain more objective data on learning processes (attention levels), we conducted Study 2, which collected behavioral and EEG data from 42 college students during the online learning. The results showed that the competition group had higher SA, lower attention levels, and worse test scores, and the relationship between SA/TA and attention levels could be mediated through the BIS. The present study not only expands previous research by finding that BIS functioning plays an important role in the effects of anxiety on cognitive load and attention, but also offers implications for using competitive strategies to motivate students according to their aptitude.

The importance of enzymes in the poultry industry is ever increasing because they help to extract as many nutrients as possible from the raw material available and reduce environmental impacts. Therefore, an experiment was conducted to examine the effect of a natural enzyme complex (ASC) on diets low in AME, Ca and P. Ross 308 broilers (n = 900) were fed one of four diets: (1) positive control (PC) with no enzyme added (AME 12.55 MJ/kg, AVPhos 4.8 g/kg and AVCal 9.6 g/kg); (2) negative control (NC) with no enzyme added and down-specified for AME, Ca and P (AME 12.18 MJ/kg, AVPhos 3.3 g/kg, AVCal 8.1 g/kg); (3) negative control plus ASC at 200 g/t; and (4) negative control plus ASC at 400 g/t. Broiler performance, digesta viscosity, tibia mineralization and mineral content were analyzed at d 21. Between d 18 and 20, excreted DM, GE, total nitrogen, Ca, and P were analyzed. ASC at 200 g/t and 400 g/t improved the FCR (p = 0.0014) significantly when compared with that of the NC. There were no significant differences in BW or FI between the treatments. Birds fed ASC at 200 g/t and 400 g/t had significantly improved digesta viscosity (p &lt; 0.0001) compared with that of the PC and NC and had significantly higher excreted DM digestibility (p &lt; 0.01) than the NC and the PC with 400 g/t ASC. ASC inclusion significantly improved P retention (p &lt; 0.0001) compared with that in the PC. Ca retention was significantly increased by 400 g/t ASC compared with that in the PC and NC (p &lt; 0.001). AME was significantly higher (p &lt; 0.0001) for all treatments compared with that in the NC. There were no significant differences between treatments for any of the bone measurements. This study showed that feeding ASC can support the performance of broilers when fed a specification reduced in Ca, P and AME, with the greatest results being seen with the higher inclusion level of ASC.

The present study aimed to investigate the effects of a 10-week online high-intensity interval training (HIIT) on body composition and aerobic performance in physically sedentary women. A parallel two-group, longitudinal (pre, post) design was used with physical tests performed before (preintervention) and after (postintervention) the 10-week intervention period. A total of for-ty-eight healthy and physically sedentary women were recruited to participate in this study. Par-ticipants were distributed in two groups: The experimental group (EG) with 24 women (n = 24, age 21.21 ± 2.15 years, weight 61.16 ± 8.94 kg, height 163.96 ± 4.87 cm, body mass index body weight 22.69 ± 2.49 kg/m2), and the control group (CG) with another 24 women (n = 24, age 20.50 ± 1.29 years, weight 62.0 ± 6.65 kg, height 163.92 ± 4 .89 cm, body mass index 23.04 ± 1.74 kg/m2). The EG performed an online HIIT program for 10 weeks, while CG continued with their daily life routines. The repeated measures ANCOVA indicated a significant effect in the within-group analysis for weight (p=0.001; d=-0.96), demonstrating a significant decrease in the Experimental Group (EG) while the Control Group (CG) did not show a significant decrease in body mass in-dex (p=0.15; d=-0.11). Regarding maximal oxygen uptake (VO2 max) values, the EG exhibited a significant improvement (p=0.001; d=-1.07), whereas the CG did not demonstrate a significant improvement (p=0.08; d=-0.37). A new within-group analysis with power output (W) revealed that EG significantly improved (p=0.01; d=-0.96), while CG did not show a significant improve-ment in power output (W/kg) (p=0.20; d=-0.11). Lastly, the within-group analysis with Load re-vealed that EG significantly improved (p=0.001; d=-0.50), while CG did not show a significant improvement in Load (p=0.10.; d=-0.10). The present study showed that 10 weeks of HIIT in an online environment during the Covid-19 lockdown significantly improved maximum oxygen consumption, and caused weight loss and a significant decrease in body mass index in physically sedentary women. These results suggest HIIT may be used as a time-efficient strategy to improve body composition and cardio-respiratory fitness in sedentary women.

In this paper, the sol−gel method was used to synthesize powders of LaMnO3 (LMO), La0.85Ca0.15MnO3 (LCM), and La0.85Sr0.15MnO3 (LSM). We investigated the impact of substituting Ca and Sr at the A−site on the perovskite crystal structure and electrochemical capabilities of LMO. LCM retained its orthogonal structure in comparison to the parent LMO components, whereas LSM transitioned to a rhombic structure. At 0.5 A/g, the specific capacitance of LCM and LSM electrodes is 185.5 F/g and 248 F/g, respectively.The specific capacitance of LCM was more three times than that of the LMO electrode. Among the three samples (LMO, 22.25 m2 g−1; LSM, 31.56 m2 g−1), the LCM sample exhibited the highest specific surface area of 38.79 m2 g−1. The charge transfer resistances of the LMO, LCM, and LSM are 0.48 Ω, 0.36 Ω, and 0.38 Ω, correspondingly. The LCM electrode exhibits the greatest capacitance performance due to its more refined morphology, increased concentration of oxygen vacancy, and more complete utilization of the perovskite bulk structure. The above results demonstrate that Ca or Sr substitution of A−site compounds has great potential for supercapacitor applications.

Life Cycle Cost Analysis is a method used to assess long-term economic efficiency among equivalent competing processes or products. The purpose of the paper is to investigate the nature and level of costs for an organic orchard located in Southern Romania, using a complex approach covering the entire chain of production, through the life span. The research results, based on a dynamic analysis and an integrated evaluation of the orchard's performance, have been ranked on investment and operational costs, broken down on three categories (establishment and production, post-harvest and transport costs). The highest cost, representing 151726 euros/ha/20 years, about 52.72% of the total operational costs and 50.4% of the total farm costs/ha/20 years, was recorded in exploitation stage. The scenarios for the sensitivity analysis considered different levels of average yield (40, and, respectively 60 tons/ha) with different rate of sold production (85%, optimistic scenario; 70%, pessimistic scenario). The hotpoints identified at the production stage were use of agricultural machinery, several pesticides, the costs of seedlings, anti-hail net, plastic boxes and labor cost, while at the post-harvest stage, were those related to labor and energy consumption. The transport stage has had important costs with tractor operation and the track.

The Individual Work Performance Questionnaire (IWPQ) can be defined as the individual be-haviour capable of generating value and competitive advantage for the organization. It is a mul-ti-dimensional construct, consisting of task performance, contextual performance and counter-productive work behavior. Albeit important, a comprehensive measure of individual job per-formance is still lacking in the Italian context. This paper describes the validation of an Italian adaptation of the IWPQ. A back translation procedure was used. To investigate the psychometric properties of the 18-item Italian IWPQ, 1053 participants (502 men, 47.7%; 551 women, 52.3%) were enrolled; the age of participants ranged between 19 and 69 (Mage=34.6, SD= 11.8), and for the oc-cupation, the sample is classified in blue collar 32.5%, pink collar 33% and white collar 34.5%. Exploratory and confirmatory factor analyses and multigroup confirmatory factor analyses were performed to test the structural factor of the IWPQ. The results supported the goodness of the IWPQ in the Italian context and the scales were found consistent with the original structure. One item was omitted due to a low factor loading, resulting in a final 17-item structure. Multigroup confirmatory factor analysis showed that the factor solution was invariant across both gender and occupational category and found evidence of metric invariance, uniqueness and scalar invariance, and structural invariance. Convergent and discriminant validity were also tested and showed.

The purpose of this study is to develop and evaluate the effectiveness of a medical helicopter air transport training program for emergency medical personnel. The program was developed according to Rapid Prototyping Instructional System Design (RPISD) and finalized after content validity and usability evaluation. The effectiveness of the program was evaluated using a single-arm pre-post design to measure the performance of 11 convenience-sampled emergency medical technicians after the program was applied. Data analysis was performed using the SPSS 26.0 Program and Wilcoxon Signed-Rank test. The results of this study are summarized as follows. First, the developed doctor helicopter air transport training program applied RPISD, and the development stage was divided into analysis, design and usability evaluation, and development stages; the final program was derived. Secondly, the developed medical helicopter air transport training program is composed of a blended learning training program that combines online theory lectures and offline simulations for a total of 8 sessions. Third, as a result of applying the developed doctor helicopter air transport training program to 11 emergency medical workers, both pre- and post-air transport subjective job performance and objective job performance were statistically significantly increased. The Dr. Helicopter air transport training program developed in this study was found to be a program that can sufficiently evaluate the job performance of emergency medical personnel in air transport. Through this study, we hope that this training program can directly contribute to improving the survival rate of critically ill patients in the actual air transport field.

Acceleration parameters in sit-to-stand (STS) movements are useful for measuring lower-limb function in older adults. The purpose of this study was to examine the relationship between acceleration in STS movements and physical function and the test-retest reliability of acceleration parameters in older adults. We performed cross-sectional analyses on 244 older adults including 107 men (mean age:77.4±4.7) and 137 women (mean age: 75.6±5.3). Four acceleration parameters were measured in STS movements: maximum acceleration (MA), maximum velocity (MV), maximum power (MP), and stand-up time (ST). Good intraclass correlation coefficients (ICC>0.70) were observed for all parameters. For the acceleration parameters, MA, MV, and MP were relatively strongly associated with the 5-time STS test (men: r=-0.36~-0.47; women: r=-0.37~-0.45) and the Timed up and Go test (men: r=-0.39~0.47, women: r=-0.43~-0.51): MP was also strongly associated with grip strength (men: r=0.48, women: r=0.43). All acceleration parameters were poorer in participants reporting mobility limitations than in those reporting no mobility limitations. These findings support the usefulness of sensor-based STS measurement. The system is expected to be useful in various settings where care prevention is addressed.

The aim of this paper was to test isolated and pre-selected bacteria strains from Nile tilapia intestinal mucus, collected in Brazilian commercial fish farming, to use as probiotics in the feeding. The variable were growth performance, hematology, microbiology and immunology. These strains were submitted to in vitro inhibition tests of pathogenic bacteria. Then, they were identified by PCR and sequencing, and comparing using the BLAST software. The experiment was carried out in the Fisheries Institute, Sao Paulo, Brazil, for 84 days, following the randomized experiment design with seven treatments and three replicates (21 experimental units): T0 – control, T1 – Bacillus velezensis, T2 – Bacillus pumilus, T3 – Bacillus subtilis, T4 –Enterococcus hirae T5 – Enterococcus faecium and T6 – mix of bacteria strains used to this experiment. The variables analyzed were: growth performance, DGGE (Denaturing gradient gel electrophoresis), phagocytes respiratory burst activity, hematology and bromatology. As result, the bacteria strains B. pumilus (T2) and all bacteria mix (T6), included in Nile tilapia diet, promoted better biomass values, with similar feed conversion rate of control group (p<0,05). Apparently, the microorganisms use does not affect the health and well-fare of the fish. The hematology index, except basophils and thrombocytes numbers do not demonstrated differences among the groups, as well as glycemia, lactate level, respiratory burst and lysozyme activities. In conclusion, the isolated and pre-selected bacteria from intestinal mucus of Nile tilapia, B. pumilus (T2) and mix (T6 - B. velezensis, B. pumilus, B. subtilis, E. hirae and E. faecium) improve the growth performance and may be used as probiotics for Nile tilapia.

Recycled asphalt mixture is a material remixed with old asphalt recycled material (RAP) and new aggregate, and its application is of great significance in environmental protection.Due to the wear and tear of the old asphalt mixture, the road performance of the recycled asphalt mixture will decrease. This paper uses IPP software to obtain the shape characteristics of the old and new aggregates, and found that the roundness of the old aggregate of 9.5mm-16mm is the most serious wear. Therefore, the 30% RAP, and the influence of the roundness of the recycled asphalt mixture on the road performance is studied.

This paper examines the relationship between the ratio of independent board member to the financial performance of the company under the mediation of the three pillars of environment, society, and governance (ESG) in Taiwan. The study addresses a research gap between independent directors and corporate financial performance, an issue that is rarely discussed today. The author develops the hypotheses and tests them by applying panel data regression to the data tables taken from the Thomson Reuters Eikon database to analyze data on 173 Taiwanese companies that reported ESG from 2009 to 2021. The results show that the relationship between the ratio of independent directors and financial performance has a positive relationship. At the same time, the 3 pillars of ESG also clearly show the intermediary role in this relationship. Finally, this study provides additional insights into the relationship between the ratio of independent directors and financial performance in the Taiwan context.

The study of the effect of corporate entrepreneurship(CE) which is a key indicator of success in corporate innovation performance(IP) is a central research topic. However, an empirical study on whether various types of government support(GS) have a moderating effect between these two variables is of new interest. This study empirically analyzed the effects of CE on IP and analyzed the indirect effects of GS on CE and IP based on 4000 Korean manufacturing firms. The results showed that all five factors of CE (innovativeness, risk-taking, proactiveness, autonomy, and competitive aggressiveness) had a positive effect on IP. In addition, the moderating effect of GS on the relationship between CE and IP was validated in seven categories: taxation, subsidies, financial support, human resources, technology, certification, and procurement. The results showed that five types of GS, other than financial support and technical support, strengthened the effect of CE on IP. This study provides a basis for establishing a strategy for strengthening organizational entrepreneurship and for selecting and focusing on various types of GS. It can be concluded that for more effective government support policies, direct government financial support or technical support should be more elaborately implemented.

The aim of the present study was to investigate the acute effect of caffeine supplementation on performance in official soccer matches. In double-blind, randomized crossover design, 13 professional soccer players performed two complete matches, with Caffeine (CAF) (6 mg/kg) and placebo (PLA) supplementation. Two-way repeated measures ANOVA showed that there was no effect of supplementation on the total distance covered (p = 0.536; ŋp² =0.033) or the total distance covered at different speeds (p = 0.453; ŋp² = 0.048), acceleration or deceleration (p = 0.387; ŋp² = 0.063) number of sprints (p = 0.521; µ² = 0.035) Heart Rate mean (p = 0.484; ŋp² = 0.042) Heart Rate maximum (p = 0.110; ŋp² = 0.199), Rate Perceived Effort (p = 0.151) or efficiency index (p = 0.480). Therefore, acute caffeine supplementation not effective to increase the performance of soccer players in official matches.

Introduction: Academic success is primary goal of every student. It is described as the extent to which a student has successfully achieved his or her short and long-term educational goals. Several factors have been established to predict academic performance of students. Machine learning techniques have been employed in predicting students’ performance, but it has not been prevalent in developing countries like Nigeria and most studies did not consider class teachers’ end-of-the-year rating. Aim: The aim of this work is to develop a Radial Basis Function Neural Network (RBFNN) for prediction of secondary school students’ performance. Materials and Methods: We obtained data from school repository containing students’ raw score and classteachers’ rating from year one to year six. The data was labelled into pass or fail given the actual outcome of their examinations. Subjects were categorized into Mathematics, English and major, depending on the student’s specialization. Class-teachers’ ratings were also included in the dataset. The preprocessed dataset was used to train the RBFNN model. The impact of Principal Component Analysis (PCA) was also measured. Results: We set up four experiments in order to achieve our aim. The best result gave the sensitivity of 93.49%, specificity of 75%, accuracy of 86.59% and an AUC score of 94%. Other experiments gave a relatively low performance. Conclusion: This study helps students to get a projection of academic success even before sitting for the examination. This will also help parents and counsellors in knowing the direction of their counseling to each student. Teachers and parents should pay attention to class teacher ratings of the students as this is discovered to affect the prediction accuracy of their examination success.

Formation in soccer is among the most important tactical choices for a successful match.Herein, the simulations of 420000 match-plays have been performed varying the formation, the number of opponents that are actively pressing the team, the speed of the opponents in attempting a pass interception. Dribbling has been neglected. The match-play ends either with a successful series of passes from a central back to the line of the strikers or with the opponents that steal the ball. In this work, I demonstrate that 3-4-3 formation, which is among the most employed formations, relates to the highest probability of success.

Clustering, or otherwise known as cluster analysis, is a learning problem that takes place without any human supervision. This technique has often been utilized, much efficiently, in data analysis, and serves for observing and identifying interesting, useful, or desired patterns in the said data. The clustering technique functions by performing a structured division of the data involved, in similar objects based on the characteristics that it identifies. This process results in the formation of groups, and each group that is formed, is called a cluster. A single said cluster consists of objects from the data, that have similarities among other objects found in the same cluster, and resemble differences when compared to objects identified from the data that now exist in other clusters. The process of clustering is very significant in various aspects of data analysis, as it determines and presents the intrinsic grouping of objects present in the data, based on their attributes, in a batch of unlabeled raw data. A textbook or otherwise said, good criteria, does not exist in this method of cluster analysis. That is because this process is so different and so customizable for every user, that needs it in his/her various and different needs. There is no outright best clustering algorithm, as it massively depends on the user’s scenario and needs. This paper is intended to compare and study two different clustering algorithms. The algorithms under investigation are k-mean and mean shift. These algorithms are compared according to the following factors: time complexity, training, prediction performance and accuracy of the clustering algorithms.

Cardiovascular disease (CVD) is the number one cause of death worldwide. This condition resulted in huge research on CVD increasing the need for animal models suitable for the in vivo research. Daphnia and Zebrafish are good animal models for cardiovascular research due to their relative body transparency and easy culture property. Several methods have been developed to conduct cardiac performance measurement in Daphnia and Zebrafish. However, most of the methods only able to obtain heartbeat rate. The other important cardiac endpoints like stroke volume, ejection fraction, fraction shortening, cardiac output and heartbeat regularity must use other programs for measurement. To overcome this limitation, in this study, we successfully developed a one-stop ImageJ-based method using kymograph macros language that able to obtain multiple cardiac performance endpoints simultaneously for the first time. To validate its utility, we incubate Daphnia magna at different ambient temperatures and exposed zebrafish with astemizole to detect the corresponding cardiac performance alterations. In summary, the kymograph method reported in this study provides a new, easy to use, and inexpensive one-stop method on obtaining multiple cardiac performance endpoints with high accuracy and convenience.

Hospital indebtedness is a complex and very diverse phenomenon. Thus, the goal of this study is the comparison of the financial performance of public hospitals in accordance with their ownership and size. The results of the research lead to the conclusion that the vast majority of public hospitals are indebted, and their ownership structure does not affect their financial condition. What is more, the statistical analysis depicted that large Marshall hospitals are less indebted than poviat-commune ones. In the group of medium-size hospitals, the situation was the opposite. Moreover, the study did not confirm the significant relationship between the size or ownership and the financial status of the hospital. The analysis conducted in the article is aimed at filling in the gap in studies comparing the indebtedness between different types of public hospitals.

Expensive cameras meant for research applications are usually characterized by the manufacturers and detailed specifications [1] are available for them. Suppliers of inexpensive cameras usually do not provide such detailed information about their cameras. This data set provides the acquisition speed and noise characteristics acquired from a monochrome 1.2 megapixel CMOS camera, the QHY5L-II M [2]. The source code provided along with this data set [3] can also be used to acquire similar data for other QHY cameras. This enables the use of such cost-effective cameras for other scientific applications in other fields, beyond the designed use in Astronomy.

In this paper, the effect of an exterior shading element (Iwan) on energy consumption in four different climatic regions, and for different geographical directions, has been investigated numerically and experimentally. By applying different materials and techniques and creating various elements and spaces, architects make hard climatic conditions more tolerable for residents. Iwan is one of the cooling elements which is used in different forms and dimensions in the Islamic architecture. In the present research, Iwan has been introduced as a climatic element in traditional and contemporary architectures and its role in reducing the energy consumption in buildings has been studied. In this respect, first, the thermal loads of a building without Iwan are computed by means of EnergyPlus software. Then, four different forms of Iwan are added to the above-mentioned structure along the four principal geographical directions, and the effect of Iwan on the reduction of thermal loads is analyzed for four different climates. Finally, the design parameters of Iwan, in terms of depth and form, that can help reduce the thermal loads in different climatic conditions are presented. The results show that the best position for using an Iwan is the south direction and the use of Iwan in temperate & humid, hot & humid, cold & mountainous and hot & dry climates could reduce the energy consumption in buildings by 32%, 26%, 14%, and 29%, respectively.

Some time ago, Kobayashi et al. experimentally studied the so-called Lee-Naughton-Lebed's (LNL) angular effect in strong electric fields [K. Kobayashi, M. Saito, E. Omichi, and T. Osada, Phys. Rev. Lett. \textbf{96}, 126601 (2006)]. They found that strong electric fields split the LNL conductivity maxima in $\alpha$-(ET)$_2$-based organic conductor and hypothetically introduced the corresponding equation for conductivity. In this Letter, for the first time we suggest quantum mechanical theory of the LNL angular oscillations in moderately strong electric fields. In particular, we demonstrate that the obtained by us approximate theoretical formula coincides with the hypothetical one and well describes the above mentioned experiments.

: The stability of semiconductor catalysts is a very important property in the field of catalytic reactions. Materials necessitate resistance to mechanical abrasion and chemical erosion for better overall performance. In this work, high crystallinity BiOCl nanosheets were prepared by a simple hydrothermal method. The photocatalysts demonstrate full UV light absorption ability and excellent photocatalytic norfloxacin degradation performance. 84 % of highly toxic norfloxacin were photocatalytically eliminated within 180 min. The internal structure and surface chemical state of BiOCl were analyzed by SEM, TEM, Raman, FTIR, UV-vis, XPS, and other techniques. Such high crystallinity makes BiOCl molecules closely arranged and the molecular chains strongly connected, thus exhibiting a high level of photocatalytic stability and recyclability.

The dependence of the critical temperature $T_c$ of high-temperature superconductors of various families on their composition and structure is proposed. A clear dependence of the critical temperature of high-temperature superconductors (hydrides, Hg- and Y-based cuprates) on the serial number of the constituent elements, their valence and crystal lattice structure has been revealed. For cuprates, it is shown that it is possible to obtain even higher temperatures of superconducting transitions at normal pressure by implanting mercury atoms into the crystal lattice of cuprate.

The oral cavity harbors hundreds of microbial species that are present either as planktonic cells, or incorporated into biofilms. The majority of the oral microbes are commensal organisms. Those that are pathogenic microbes can result in oral infections, and at times initiate systemic diseases. Biofilms that contain pathogens have been challenging to control. Many conventional antimicrobials have proven to be ineffective. Recent advances in science and technology are providing new approaches for pathogen control and containment and methods to characterize biofilms. This perspective provides: 1) A general understanding of biofilm development; 2) A description of emerging chemical and biological methods to control oral biofilms; 3) An overview of high-throughput analytical approaches to analyze biofilms.

This paper develops an understanding of False Performance as a negative form of workplace behaviour which has received scant attention. According to the quantitative literature, which measures False Performance using the Organisational Charlatan Scale (OCS), false performers are incompetent employees who deliberately portray themselves as better able to perform in a job role than they know themselves to be capable. In this study, False Performance was explored in United Kingdom public sector organisations for the first time, using novel focus group methodology and grounded theory. Eight focus groups (n=51) were conducted to explore employees’ perceptions and experiences of False Performance, with a focus on job interviews and performance appraisals. Using NVivo for analysis, five categories emerged: Co-Worker Perceptions of False Performance in the Workplace, False Performance in Interview/Appraisal Settings, The Impact of Trust on the False Performer, The Effect of False Performance on Co-Worker Morale, and Preventing False Performance in the Workplace. The results support the literature review that False Performance is a new and negative addition to the taxonomies of job performance. Human Resources (HR) managers are, therefore, urged to prevent and reduce False Performance via well-designed selection processes and performance appraisals, thereby improving co-worker trust amongst employees.

Judo is a popular Japanese martial art and an Olympic sport. Recently, an increasing interest has been observed in the application of judo as a multicomponent exercise, with a growing body of evidence showing that multicomponent exercise improves physical and cognitive performance in older adults. Therefore, this review highlights the benefits of judo training in preventing physical and cognitive decline in older adults. Specifically, first, this review outlines the basic characteristics of judo (philosophy, match, and training). Next, previous studies investigating the effects of judo training on physical and cognitive aspects of older adults are reviewed. Thereafter, the brain mechanisms underlying the effects of judo training in improving physical and cognitive performance are discussed. Throughout this review, judo training demonstrated some positive effects on physical (gait and balance, among others) and cognitive (memory and executive function) function in older adults. These positive effects are attributed to a variety of changes in the brain (e.g., increased neurotrophic factor expression and increased cerebral blood flow, among others), that affect different brain regions and networks both functionally and structurally. From these findings, this review concludes that judo training can be an effective way to maintain and prevent physical and cognitive decline in older adults.

Background/Objectives: Emerging data support an essential role of glucagon for lipid metabolism. However, data on the role of dietary fat intake for glucagon secretion is limited. This analysis investigated whether altering nutritional fat intake affects glucagon levels in healthy subjects. Methods: 92 twins (age: 31±14 years, BMI: 23±3 kg/m2) consumed two 6-week diets: first a low fat, high carbohydrate diet (LFD) followed by an isocaloric high fat, low carbohydrate diet (HFD). 24 twins (age: 39±15 years, BMI: 24±2 kg/m2) continued with a high protein diet (HPD). Clinical investigation days were performed after 6 weeks of LFD, after 1 and 6 weeks of HFD and after 6 weeks of HPD. Results: The LFD caused a significant decrease of fasting glucagon (-27 %, p&lt;0.001) compared to baseline. After 6 weeks of HFD glucagon increased (117 %, p&lt;0.001 vs. LFD) while free fatty acids decreased. 6 weeks of HPD further increased glucagon levels (72 %, p=0.502 vs. HFD) although fasting amino acid levels remained constant. Fasting insulin and HOMA-IR moderately increased after one week of HFD, while 6 weeks of HPD significantly decreased both. The fasting glucagon-to-insulin ratio decreased through LFD (p&lt;0.001) but increased after HFD (p&lt;0.001) and even further after HPD (p=0.018). Liver fat, triglycerides and blood glucose did not increase during the HFD. The heritability of glucagon levels was 45% with the LFD. Conclusions: A HFD increases glucagon levels and the glucagon-to-insulin ratio under isocaloric conditions compared to a LFD in healthy lean subjects. This rise in glucagon may represent a favorable metabolic response as neither glucose levels nor insulin resistance or liver fat showed clinically relevant increases.

The management of the electrical energy still raises a huge interest for end-users at the household level. Home electricity management systems (HEMS) have recently emerged both to warrant uninterruptible power and high power quality, and to decrease the cost of electricity consumption, by either shifting it in off peak time or smoothing it. Such a HEMS requires a bidirectional DC-AC converter, specifically when an energy transfer is required between a storage system and the AC-grid, and vice versa. This article points out the relevance of an innovative topology based on sinusoidal waveforms from the generation of sine half-waves. Such a topology is based on a DC-DC stage equivalent to an adjustable output voltage source and a DC-AC stage (H-bridge) which are in series. The results of a complete experimental procedure prove the feasibility to improve the power quality of the output signals in terms of total harmonic distortion (THD-values about 5%). The complexity of the proposed converter is minimized in comparison with multilevel topologies. Finally, wide band-gap semiconductor devices (SiC MOSFETs) are helpful both to warrant the compactness and the high efficiency (about 96%) of the bidirectional converter, whatever its operation mode (inverter or rectifier mode).

Ultrasonic imaging & NDE applications can greatly improve their signal-to-noise ratios (SNR) by driving each transducer (composing piezoelectric arrays) with a spike giving pulsed power of k-Watts, repetitively at a PRF = 5000 spikes/s, by using a HV capacitive-discharge generator. However very-high levels, of pulsed intensities (3-10 A) and voltages (300-700 V) must be considered for a rigorous spike modeling. Even though the consumed "average" power will be small, the intensity through each transducer achieves several amperes, so the pulsed powers delivered by each HV generator can attain levels higher than in CW high-power ultrasonic applications: e.g., up to 5 kW / spike. This is concluded here from a transient modeling of the loaded generator. Then, unforeseen phenomena rise: intense brief pulses of driving power & emitted force in transducers, and non-linearities in driver semiconductors, because their characteristic curves only include linear ranges. But fortunately, piezoelectric devices working in this intense regime do not show serious heating problems, because the average power remains being moderate. Intensity, power and voltage, driving a broadband transducer from a HV capacitive pulser, are calculated to drastically improve (in ≅ 40 dB) the ultrasonic net dynamic range available, with emitted forces ≅ 250 Newtons pp and E/R received pulses of 70 V pp.

This paper presents Double Database Decomposition Framework, which integrates vertical and horizontal table decompositions to minimize data leakage due to intrusions. Vertical decompositions segregate sensitive attributes, while horizontal ones partition data based on user access patterns. In this way, the framework ensures that users access only the data necessary for their operations, adhering to the principle of least privilege. This double decomposition approach improves the robustness of the original database against impersonation attacks and limits the blast radius of potential intrusions. Furthermore, the framework significantly mitigates the risks associated with data breaches by confining unauthorized access to specific data subsets and restricting the exposure of sensitive information. Performance analysis highlights the trade-offs between robustness and overhead offered by distinct allocation strategies of the output of the decompositions to, among other, physical machines, virtual machines, and containers, to balance security and resource efficiency. We present a case study in a healthcare environment that confirms both the effectiveness of the framework and its applicability in complex systems where data security is paramount. By integrating advanced security measures and optimising data access, the framework results in a scalable and adaptable solution for enhancing database security and performance in various domains.

The attempt of this study made us to Study the Competency Mapping (CM) in Software Companies”. CM is a process of categorizing the gap of a person or an employee’s performance routine or professional related skills to fill the gaps through effective programs. (1) Background: Integrating competencies such as “Developing people through Empowering and Training Programs, Providing Feedback, and Rewards, Recognizing the Employee for their work, Effective Communication, Aligning right values ensuring standards, etc. to evaluate and improve the performance an employee to get desired results; (2) Methods: This study involved 100 software employees (n = 100) to state that the competencies that are mapped have a significant impact on performance.. Chi- square and one – way ANOVA tests we used to identify the relationship between two variables; (3) Results: Goal oriented people can adopt the changes and work in any kind of circumstance for better outcomes; (4) Conclusions: competencies that are mapped have a significant impact on performance. And the person who is goal oriented will try to achieve his/her goals in any type of circumstances.

The present qualitative study delves into the sustainability practices within supply chain management, emphasizing insights garnered from leading global firms. With sustainability becoming an imperative across industries, understanding how top firms integrate sustainable practices within their supply chains offers valuable lessons for broader implementation. The investigation draws on interviews, case studies, and existing literature to identify key strategies, challenges, and outcomes associated with sustainable supply chain management. Findings reveal a comprehensive approach involving the adoption of green technologies, ethical sourcing, and stakeholder engagement, all of which contribute to enhanced environmental and social performance. The discussion highlights the critical role of leadership, innovation, and collaboration in driving sustainability, underscoring the need for continuous improvement and adaptation. Ultimately, the study concludes that while significant progress has been made, ongoing efforts and commitment are essential for achieving long-term sustainability goals in supply chain management.