Background : Probiotics are composed of microorganisms that have positive effects on health when consumed in prescribed quantities. Lately, studies have attempted to establish this role of probiotics in enhancing health. Aim : The aim of this study was to compare the antifungal activity of 3 different probiotics against Candida albicans.Methodology :This was an in-vitro study. 3 types of commercially available probiotics - Bifilac, Pre pro HS and VSL-3 were cultured separately with Candida albicans and were placed under incubation. The maximum zone of inhibition was recorded for each of the probiotic solutions.Results : In this study, it was found that among the three probiotic products, Bifilac exhibited a maximum zone of inhibition of 13mm at concentration of 100µL against C. albicans, while Pre pro HS and VSL-3 showed zone of inhibition of 11mm at concentrations of 50µL and 100µL, respectively.Conclusion : Within the limits of the present study, This study could prove that probiotics can be considered as an alternative and safe treatment option for treatment of Oral candidiasis infections.

Objectives of this study were to investigate effects of repeated superstimulation on the success of ovum-pick up and in vitro production of embryos (OPU-IVP) and donor health and evaluate the efficiency of a modified SOF sequential medium in producing viable embryos. Over 1 y, six cross-bred beef heifers and three beef cows were subjected to superstimulations and OPU-IVP. Oocytes recovered were used for in vitro embryo production and the resulting embryos were transferred as fresh or frozen-thawed. Number of follicles, oocytes recovered, cleavage and blastocyst rates substantially varied among individuals. However, repeated trials did not significantly affect the efficiency of OPU-IVP. The pregnancy rates (PR) 22 to 30 d after embryo transfer for in vitro-derived fresh embryos was similar to that of fresh in vivo embryos, whereas transfer of in vitro-derived frozen embryos reduced PR compared to frozen-thawed in vivo embryos. All recipient heifers diagnosed pregnant delivered a viable calf, suggesting developmental competence of the embryos. Repeated OPU-IVP had no apparent deleterious effects, as all donors had viable calves after ET. We concluded that multiple OPU-IVP cycles can be effectively performed for a prolonged interval to maximize embryo production from elite donors without compromising their reproductive health.

Combination antiviral therapy may be helpful in the treatment of SARS-CoV-2 infection, however no clinical trial data are available and combined use of direct acting antivirals (DAA) and monoclonal antibodies (mAb) has been reported only anecdotally. To assess the cooperative effects of dual drug combinations in vitro, we used a VERO E6 cell based in vitro system with the ancestral B.1 or the highly divergent BQ.1.1 virus to test pairwise combinations of the licensed DAA, including nirmatrelvir (NRM), remdesivir (RDV) and the active metabolite of molnupiravir (EIDD-1931) as well the combination of RDV with four licensed mAbs (sotrovimab, bebtelovimab, cilgavimab, tixagevimab; tested only with the susceptible B.1 virus). According to SynergyFinder 3.0 summary and weighted scores, all the combinations had an additive effect. Within DAA/DAA combinations, paired scores with the B.1 and BQ.1.1 variants were comparable. In the post-hoc analysis weighting synergy by concentrations, several cases of highly synergistic scores were detected at specific drug concentrations, both for DAA/DAA and for RDV/mAb combinations. This was supported by in vitro confirmation experiments showing a more than linear shift of a drug effective concentration (IC50) at increasing concentrations of the companion drug, although the effect was prominent with DAA/DAA combinations but minimal or null with RDV/mAb combinations. These results support a cooperative effects of dual drug combinations in vitro, which should be further investigated in animal models before introduction into the clinic.

Chest trauma is a critical medical condition that encompasses a range of injuries and can result from various causes. Prompt and accurate diagnosis is crucial in managing chest trauma patients and radiology plays a pivotal role in this aspect. Imaging modalities in chest trauma aid in precise diagnosis and treatment planning. Especially, X-rays remain the initial imaging modality of choice due to their accessibility, speed, and ability to detect acute life-threatening conditions. Computed Tomography (CT) Scan offers detailed cross-sectional images allowing for comprehensive evaluation of chest trauma and surgical planning when necessary. Ultrasound (US) is increasingly valuable tool due to its portability and real-time imaging capabilities, aiding in rapid assessment at the bedside. Magnetic Resonance Imaging (MRI) is less commonly used due to time constraints and limited availability. Radiological imaging serves various purposes in the diagnosis and management of chest trauma such as early detection and triage, characterization and severity assessment, surgical planning, follow-up and monitoring of chest trauma. Reduction of radiation exposure, advancements in imaging technology (dual-energy CT, contrast-enhanced imaging) and Artificial Intelligence (AI) algorithms are crucial challenges and deserve attention. A multidisciplinary approach integrating radiological expertise remains fundamental in ensuring optimal outcomes for patients with chest trauma.

The aim of the research presented here is to assess the impact of depressive disorders on the potential of the labour markets in the countries of the European Union, with particular reference to the disparities between the 'old' and 'new' EU countries. The initial hypothesis of persistent inequalities in the system under study was verified by analysing the process of convergence in the burden of depressive disorders among people aged 20-54 that occurred in the EU-27 group of countries between 1990 and 2019. The study used data from the Global Burden of Disease Study 2019 (IHME, 2020), which examined the number of years lived with disability (YLD) due to depression in the working age population. The analysis showed that the high burden of the consequences of depressive disorders is particularly true for the highly developed economies of the EU-14. The results of the convergence assessment did not confirm the real effect of catching up over time with economies in a more favourable situation, and the inequalities observed at the beginning of the analysis period deepened..

A typical solid-state quantum sensor can be developed based on negatively charged nitrogen-vacancy (NV-) centers in diamond. The electron spin state of NV- can be controlled and read at room temperature. Through optical detection magnetic resonance (ODMR) technology, temperature measurement inside living cells can be achieved at the nanoscale. The key to ODMR technology is to apply microwave resonance to manipulate the electron spin state of NV-. Therefore, the microwave field characteristics formed near the NV- have a crucial impact on the sensitivity of ODMR measurement. This article mainly focuses on the temperature situation in cellular applications, and simulates the influence of structural parameters of double open loop resonant (DOLR) microwave antennas and broadband large-area (BLA) microwave antennas on the microwave field’s resonance frequency, quality factor Q, magnetic field strength, uniformity, etc. The parameters are optimized to have sufficient bandwidth, high signal-to-noise ratio, low power loss, and high magnetic field strength in the temperature range of 36 ℃ to 42.5 ℃. Finally, the ODMR spectra are used for effect comparison, and the signal-to-noise ratio and Q values of the ODMR spectra are compared when using different antennas. We have provided an optimization method for the design of microwave antennas and it is concluded that the DOLR microwave antenna is more suitable for living cell temperature measurement in our study.

Diffuse large B-cell lymphoma (DLBCL) is the most common subtype of non-Hodgkin lymphoma and a heterogeneous disease characterized by mature B-cell neoplasms. The standard immunochemotherapy for DLBCL is R-CHOP, which includes rituximab, cyclophosphamide, doxoru-bicin, vincristine, and prednisone. Up to 30-40% of patients with DLBCL either exhibit primary refractory disease to standard treatment or experience relapse after the initial response. A 72-year-old man diagnosed with DLBCL involving chromosomal translocations t(1;22)(q21;q11.2) and t(6;18)(p25;q21) showed primary refractory disease after the fourth cycle of R-CHOP. The patient ultimately experienced cardiac involvement by the lymphoma and received salvage chemotherapy. He passed away about 15 months away after the diagnosis of DLBCL. We conducted fluorescence in situ hybridization (FISH) for further analysis of the chromosomal translocations. The breakpoint of chromosome 1q21 was located at a distance of around 151 Mb from the telomeric end of chromosome 1p. The breakpoint in chromosome 22q11 contains the immunoglobulin lambda locus. Furthermore, the breakpoint of chromosome 6p was in the telomeric region of chromosome 6p21. The breakpoint of chromosome 18q21 contains BCL2. This case report presents the first documented co-occurrence of chromosomal translocations t(1;22)(q21;q11.2) and t(6;18)(p25;q21) in a patient with DLBCL. These chromosomal translocations may indicate a worse clinical outcome.

A traditionally salient topic of empirical investigation in the sociology of religion, this paper seeks to offer a recent investigation into the intergenerational transmission of religion and the parental forms of religious engagement that predict adult engagement with religion. The study of this paper explores the intergenerational transmission of religion, focusing on the parental forms of religious identity and engagement that influence religious identity, beliefs, and practices in adulthood. By analyzing the 2018 GSS dataset in the United States with multiple regression analyses, I find strong parental and childhood influences on adult religiosity, religious service attendance, and belief in God. Indeed, this engagement often mirrors parental engagement for these variables. However, while paternal religious identity often predicts these religious variables, I find that the religious identity and engagement of parents generally does not predict religious identity in adulthood. Ultimately, while these results generally show strong predictive mechanisms of intergenerational transmission, they also illustrate that these relationships are variably dependent on the form of parental and adult religious engagement and which parent participates or is associated with that engagement.

Autonomous Underwater Vehicles (AUVs) are emerging as pivotal tools in underwater applications such as seafloor exploration and the inspection of pipelines or cables. Traditional land-based avoidance methods prove insufficient when applied to the complex underwater environment, largely due to the unique constraints presented by marine environments and the specific dynamics of AUVs. In this study, we introduce an improved stream function-based obstacle avoidance algorithm specifically tailored for autonomous underwater vehicles. The proposed algorithm is based on a stream function that is derived from the stream function. The stream function is characterized by a radial histogram for the cost function. In addition, constraints related to the maximum path curvature are discussed to optimize the utility of the path. Our exhaustive simulation cases validate the robustness and adaptability of the proposed algorithm, demonstrating its ability to produce feasible and optimized avoidance paths in a variety of scenarios.

Purpose: School-age children with autism spectrum conditions (ASC) often experience difficulties in speech-in-noise (SiN) perception, leading to increased listening effort that impacts their well-being and academic performance. This study aimed to investigate the SiN processing challenges faced by Mandarin-speaking children with ASC and its impact on their listening effort. Methods: Participants completed sentence recognition tests in both quiet and noisy conditions, with a steady-state noise masker presented at 0 dB signal-to-noise ratio in the noisy condition. We compared recognition accuracy and task-evoked pupil responses from 23 Mandarin-speaking children with ASC to 19 age-matched neurotypical (NT) counterparts to gauge their behavioral performance and listening effort during these auditory tasks. Results: The ASC group demonstrated notably decreased accuracy in noise compared to their NT peers, suggesting poorer SiN perception. Pupillometric data further revealed significantly larger peak dilations in the ASC group than in the NT group under comparable conditions. Importantly, the ASC group's peak dilation in quiet mirrored the NT group's in noise. However, the ASC group exhibited shorter peak latencies and reduced mean dilations than the NT group in similar conditions. Such patterns indicate the ASC group might initially experience a heightened cognitive load but utilize fewer cognitive resources as the task continued, indicating an atypical allocation of cognitive resources and a potential tendency towards relatively superficial and automated auditory processing. Conclusion: Our findings highlight the unique SiN processing challenges children with ASC face, underscoring the importance of a nuanced, individual-centric approach for interventions and support.

Halloysite and kaolinite are dioctahedral TO phyllosilicates that drive the interest of scientists for formulating environmental friendly materials, and consequently in the field of ceramics. The main scope of this study was the understanding of the texture evolution upon the dehydroxylation reaction and the influence of the presence of halloysite. In situ synchrotron (002) and (111) poles figures were recorded on the DiffAbs beamline at SOLEIL Synchrotron, from room temperature to 1000°C, on kaolinite and/or halloysite-rich samples shaped by tape casting. Commercial kaolins and halloysite provided by Imerys company were used. The samples were labeled KRG100, KCS100, H100, KRG50H50 and KRG59H50 in relation with the wt. % of kaolin (KRG, KCS) or halloysite (H) clays. In samples KCS100 and KRG100, a strong texture was observed until in situ annealing at 700°C, with respect to the c-axis of kaolinite. One the contrary, the texture with respect to the c-axis of halloysite for the sample H100 was weak whatever the temperature was. Moreover, this weak texture disappeared before the complete dehydroxylation of halloysite. This is due to the opening of some halloysite tubes. When considering the samples KRG50H50 and KCS50H50, a significant texture was observed with the c-axis preferentially oriented perpendicular to the sample surface . The presence of kaolinite platelets predominated onto the alignment of halloysites tubes. Furthermore, it was noted that the halloysite influenced the (002) diffracted intensity into the temperature range 20 °C and 400 °C. Above 400°C, the behavior obtained for the (002) reflection in samples KRG50H50 and KCS50H50 was similar to the behavior noticed for pure kaolins KRG100 and KCS100 respectively. The dehydroxylation temperature range appeared to be relevant with combined effect of kaolinite and halloysite transformations arising from KRG100 or KCS100 and H100 samples. Therefore, the onset point of dehydroxylation is 550 °C ± 25 °C for KRG100, KCS100 KRG50H50 and KCS50H50. For the pure halloysite H100 sample, the dehydroxylation starts at lower temperature 475°C. It was also noted that during the dehydroxylation of kaolinite, the characteristic portion of ring related to the diffracted intensity of the (111) reflection located at χ = 45 ° tended to disappear above 550 °C and led to the formation of a new transitory phase with a (111) reflection with perpendicular alignment to the c-axis. Indeed, an epitaxial relationship with the (111) kaolinite reflection could be assumed. Further X-ray scattering experiments allowed highlighting the effective offset temperature of the dehydroxylation, which was identified as close to 720 °C. The metakaolinite obtained undergone structural transformation to another transitory phase at 1000°C.

Electric stimulation via a Cochlear Implant (CI) enables people with severe to profound sensorineural hearing loss to regain speech understanding and music appreciation and thus allowing them to actively engage in social life. Three main manufacturers (Cochlear, MED-EL and Advanced Bionics “AB”) have been offering CI systems, thus challenging CI recipients and Otolaryngologists with a difficult decision, as currently no comprehensive overview or meta-analyses on performance outcome following CI implantation is available. The main goal of this scoping review is to provide evidence that data and standardized speech and music performance tests are available for performing such comparisons. To this end, a literature search was conducted to find studies that address speech and music outcomes in CI recipients. From a total of 1592 papers, 188 paper abstracts were analyzed and 147 articles were found suitable for examination of full text. From which, 42 studies were included for synthesis. A total of 16 studies used the consonant-nucleus-consonant (CNC) word recognition test in quiet at 60db SPL. We found that aside from technical comparisons, only very few publications compare speech outcomes across manufacturers of CI systems. Evidence suggests though, that these data are available in large CI centers in Germany and US. Future studies should therefore leverage large data cohorts to perform such comparisons that could provide critical evaluation criteria and assist both CI recipients and Otolaryngologists to make informed performance-based decisions.

According to the cognitive radio (CR) paradigm, the efficient use of the radio spectrum is achieved by performing four main functions: spectral perception, spectral mobility, decision-making, and cooperation. In this work, a multivariable algorithm that considers geographic mobility (GM) is presented. The decision-making process includes a feedback mechanism for the dynamic selection of reservation channels in a wireless network with cognitive capabilities. Geographic mobility plays a crucial role in how radio takes advantage of its environment; however, it has been scarcely explored in the literature. In the present work, geographic mobility tests were carried out involving the interaction of CR and primary users (PU), where a measurement of the latency time of the proposed algorithm called: Algorithm for Decision-Making with Geographic Mobility (ATDeMoGeo) was evaluated and compared with other algorithms such as: Dijkstra's Algorithm, Analytic Hierarchical Process (AHP), Fuzzy Analytic Hierarchical Process (FAHP) and Decision-Making Algorithm with Modified Dijkstra (ATDDiM). It was found that the proposed algorithm is robust and that it considerably reduces the latency time to accurately determine the best communication channels, thanks to the decision-making function implemented to establish which channels the CRs can occupy. For the selection of the best reserve channels, a series of criteria were considered, such as: signal-to-interference plus noise ratio (SINR), bandwidth (BW), probability of channel availability (AP), estimated channel time of availability (ETA) using the random waypoint mobility model (RWPM). These criteria are evaluated for two types of service, i.e., real time (RT) and best effort (BE). For the evaluation and validation of the ATDeMoGeo algorithm, a network with cognitive characteristics in NS-3 was simulated. The simulation scenarios consisted of a base station (BS) with mobile CRs and PUs. Based on the previous criteria, i.e., BW, SINR, AP and ETA, the BS assesses the spectrum occupancy information obtained by the CRs. The results show that the proposed algorithm can be used without problem for the proposed scenarios with higher speed and accuracy for the selection of better communication channels.

During the preclinical research process, multiple factors can be difficult to implement without the careful consideration and planning of each step. As research has become more advanced with the use of increasingly complex technology, animal models have also become essential for understanding the potential impact of devices, drug therapies, and surgical techniques on humans before clinical trials are conducted. The use of an in vivo animal model is a key and necessary step in the progression of preclinical research studies that will lead to future medical inventions and innovation. Here, we describe the three phases of effectively designing a preclinical research protocol: the research, preprocedural planning, and experimental phases. Furthermore, we provide researchers with guidance through these phases and discuss important considerations.

Shallow Geothermal Energy (SGE) exchanges heat with the ground. In continuous long-term operation, the initial temperature field can be disturbed, and subsurface thermal plumes can be developed. In this paper, the thermal impact of a SGE system under Mediterranean climate is handled. Temperature recordings from 104 thermal probes placed in depth along 15 monitoring boreholes are analysed. Those boreholes were drilled 1-2m from thermos-active boreholes of the case study system installed in a university building. The analysis handles one year of SGE system operation. Temperature depth profiles, reaching up to 140 m depth, were registered with a 10-minute time-step resulting in a large amount of data. Ground thermal conductivity was estimated experimentally and semi-empirically allowing to compute the initial undisturbed ground temperature profiles and compare it with the monitored values. Climate data was recorded by the university meteorological station. Globally, the measured and computed data were coherent and a non-negligible impact of the SGE system operation in the first year was observed. The building orientation as well as the nearby departments had significant impacts on shallow ground temperature. Maximum ground temperature changes, ranging from 2 to 3º C as observed in different boreholes indicating that the system is operating efficiently.

This research evaluated the role and feasibility of the granular nanocellulose particles (GNC) from sugarcane bagasse obtained from enzymatic hydrolysis in reducing lipid digestibility and permeability in the in vitro simulated gastrointestinal (GI) system. GNC concentration (0.02%, w/v) had significantly affected the released free fatty acid (FFA) reduction of approximately 20%. The Pick-ring emulsion of the GNC and olive oil simulation mixture revealed higher oil droplet size distribution and stability in the initial stage than the vortexed mixture formation. The difference in particle size distribution and zeta potential of the ingested GNC suspension and GNC-olive oil emulsion were displayed during the in vitro gastrointestinal simulation. GNC particles interacted and distributed surrounding the oil droplet leading to the interfacial emulsion. The GNC concentration (0.01-0.10%, w/v) showed low toxicity on the HIEC-6 cell, ranging from 80.0 to 99% of cell viability. The release of FFA containing the ingested GNC suspension and GNC-olive oil emulsion was about 30% reduction compared to without GNC digest solution. The FFA and triglyceride permeability through the HIEC-6 intestinal epithelium monolayer were deceased in the digesta containing the ingested GNC and emulsion. This work indicated that GNC represented a significantly critical role and properties in the GI tract and reduced lipid digestion and absorption. This GNC could be utilized as an alternative food additive or supplement in fatty food for weight control due to their inhibiting lipid digestibility and assimilation.

Parkinson’s Disease (PD) is a neurodegenerative disorder characterized by motor and non-motor impairment with various implications on patients’ quality of life. Since currently available therapies are only symptomatic, identifying individuals with prodromal, preclinical or early-stage PD is crucial, as they would be ideal candidates for future disease-modifying therapies. Our analysis aims to develop a robust model for accurate PD detection using accelerometer data collected from PD and non-PD individuals with mild or no tremor during phone conversations. An open-access dataset comprising accelerometer recordings from 22 PD patients and 11 healthy controls (HC) was utilized. The data were pre-processed to extract relevant time, frequency and energy-related features, and a Bidirectional Long Short-Term Memory (Bi-LSTM) model with attention mechanism was employed for classification. The performance of the model was evaluated using 5-fold cross-validation, and metrics of accuracy, precision, recall, specificity, and f1-score were computed. The proposed model demonstrated high accuracy (98%), precision (99%), recall (98%), specificity (96%), and f1-score (98%) in accurately distinguishing PD patients from HC. Our findings indicate that the proposed model outperforms existing approaches and holds promise for detection of PD with subtle symptoms, like tremor, in the wild. Such symptoms can present in the early or even prodromal stage of the disease, and appropriate mobile-based applications may be a practical tool in real-life settings to alert individuals at risk to seek medical assistance or give patients feedback in monitoring their symptoms.

Cheese whey, a significant byproduct of the dairy industry, poses a substantial environmental challenge due to its organic pollutant load and large size demands for effective and affordable valorization methods. The abundance of lactose and other organic compounds in whey contributes to its elevated Biological Oxygen Demand (BOD) and Chemical Oxygen Demand (COD), further straining natural ecosystems. This study aimed to investigate the nutritional potential of whey and its conversion into value-added products: bioethanol and probiotic drinks. To achieve this, Bacillus megaterium and Bacillus subtilis strains, isolated from soil samples in Nepal, were co-cultured with Lactobacillus and Saccharomyces cerevisiae in the whey broth for fermentation. Ethanol distillation was carried out using a Rota-evaporator to maintain the viability of the fermenting organisms within the broth. Moreover, the probiotic criteria of the fermenting strains were extensively examined. Experimental observations revealed a remarkable concentration of 9.2 g/L of ethanol, resulting in an ethanol yield of 0.23 g/L. Extrapolating this rate, it is theoretically possible to produce an annual global bioethanol output of 5 million tons using whey as a sustainable and abundant resource. Furthermore, the study explores novel advancements in the distillation process, demonstrating the successful extraction of ethanol at room temperature. Additionally, the fermentation organisms employed in this research exhibit robust viability, surviving various in-vitro stress-tolerant tests, including exposure to bile salt, pH fluctuations, and gastric juice. These resilient strains also demonstrated long-term stability in fermented whey broth, making them promising candidates for the development of probiotic beverages. This dual approach not only enables the sustainable management of organic waste but also presents an opportunity to create value-added products with positive implications for both the environment and human health.

The dimorphic, soil-dwelling fungus Coccidioides is the causative agent of coccidioidomycosis and is a reemerging pathogen of human health concern. Despite increasing incidence and isolations of the organism outside of its theoretical environmental range, much of Coccidioides epidemiology, including complete host range, remains unknown. Feral swine (Sus scrofa) are an invasive species distributed throughout the United States that may play a role in fungal ecology due to their behavioral associations with soil. To address this, we evaluated seven feral swine for susceptibility to Coccidioides. After intranasal inoculation with 106.2 arthroconidia of C. posadasii, no pigs displayed signs of clinical disease, nor did any exhibit antibodies by AGID testing. Histopathologic evaluation did not reveal the presence granulomatous lesions, and fungal spherules or endospores were not observed in any of the tissue sections examined, although individuals had significant comorbidities, most notably Metastrongylus nematodes in the lungs. Despite the absence of lesions and organisms histologically, C. posadasii was isolated by culture from the lung and mediastinal lymph node of two pigs, indicating active infection. These results suggest that feral swine are mildly susceptible to acute Coccidioides infection and may aid in fungal dispersal due to the presence of spherules in tissues post-mortem.

Pruning is an important part in controlling the branching, good fruit size, and prodctivity of fruit trees. and consequently, ‘Valencia’ orange trees were grown many years ago, the trees were suffering from a decline in productivity in the newly reclaimed lands after certain years of plantation. This study elucidated the effect of pruning severity on growth, yield and fruit quality of ‘Valencia’ orange trees. Four levels of pruning were applied on 35 years old ‘Valencia’ orange trees as follows: T1: Control (un-pruned), T2: Light pruning ( 25% of main branches were removed); T3: Moderate pruning (50% of main branches were removed) and T4: Heavy pruning: 75% of main branches were removed. The treatments were done in February 15th (for each season). The results indicated that pruning severity increased vegetative growth paraments such as shoot length and leaf area and decreased canopy volume of Valencia orange trees in comparison to control. Maximum yield was gained from 75% followed by 50% and 25% pruning severity treatment. The pruning treatments improve in fruit weight, size, firmness, juice content, TSS%, TSS/acid ratio and vitamin C content. In addition, pruning produced an increasing in fruit yield per tree as well as yield increasing %. Hence, it might be concluded that pruning at different severity applied in February can be used effectively on ‘Valencia’ orange trees to improve vegetative growth, fruit physical and chemical properties. Besides, increasing fruit yield by nearly 20% in comparison to control.

In order to study the effects of irradiation on the physicochemical properties and digestion behavior of chickpea protein, chickpea protein concentrate (CPC) was treated with electron beam irradiation (EBI) at doses of 5, 10, 15 and 20 kGy, respectively. After irradiation, protein solubility first increased at 10 kGy and 15 kGy, and then decreased at higher dose of 20 kGy. This was supported by SDS-PAGE where the intensity of major protein bands first increased and then decreased. Increased does of EBI generally led to greater oxidative modification of proteins in CPC, indicated by reduced sulfhydryls and increased carbonyls. In addition, protein structure was modified by EBI shown by Fourier transform infrared spectroscopy analysis where α-helix generally decreased and β-sheet increased. Although the protein digestibility was not significantly affected by EBI, the peptidomic analysis of the digests revealed significant difference among CPC irradiated with varying doses. A total of 337 peptides were identified from CPC irradiated with 0 kGy, 10 kGy and 20 kGy, respectively, with 18 overlapping peptides and 60, 29 and 40 peptides specific to the groups of 0, 10 and 20 kGy respectively. Theoretical calculation showed that the distribution of peptide length, hydrophobicity, net charge, and C-terminal residues were affected by irradiation. The 2, 2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) radical scavenging activity showed a marginal decrease with increasing dose of irradiation. In conclusion, EBI led to oxidative modification and structural changes of the chickpea protein, which subsequently affected the physicochemical properties of peptides obtained from in-vitro digestion of CPC despite of similar digestibility.

The growth of two pairs of co-cultures (Escherichia coli/Geotrichum candidum, and Staphylococcus aureus/Geotrichum candidum) with a starter culture of lactic acid bacteria was studied in milk at temperatures related to artisanal cheesemaking ripening. For an inoculum of approximately 106 CFU/mL, LAB not only induced an early stationary phase of E. coli (two strains BR and PS2) and S. aureus (strains 2064 and 14733) but affected their death phase. G. candidum was found to be the subject of interactions with LAB within a given temperature range only partially. To develop a tertiary model for the growth curves of the populations, a one-step approach was used, combining two types of primary models (Huang and Gimenez and Dalgaard) with secondary square root models for growth rate and lag time. Furthermore, the reparametrized Gompertz-inspired function with the Bigelow secondary model was used to describe the death phase of the E. coli and S. aureus strains. The prediction ability of the growth of the H-GD tertiary model for co-cultures was cross-validated within the strains and data sets in milk and milk medium with 1 % NaCl.

This study reports fractal analysis of one-year radon in groundwater disturbances from five stations in China amid the catastrophic Wenchuan (Mw=7.9) earthquake of May 12, 2008 (day 133). Five techniques are used (DFA, fractal dimensions with Higuchi, Katz, Sevcik methods, power-law analysis) in segmented portions glided throughout each signal. Noteworthy fractal areas are outlined in the KDS, GS, MSS station data, while the portions were non-significant for PZHS and SPS. Up to day 133 critical epoch DFA-exponents have 1.5<=a<2.0 with several above 1.8. Fractal dimensions exhibit Katz’s D around 1.0-1.2, Higuchi’s D between 1.5-2.0 and Sevcik’s D between 1.0-1.5. Several power-law exponents are above 1.7 and numerous above 2.0. All fractal results of KDS-GS-MSS stations are further analysed using a novel computerised methodology which locates the exact out-of-threshold fractal areas and combines the outcomes of different methods per five, four, three, and two (maximum 13 combinations) versus nineteen Mw<=5.5 earthquakes of the area. Most different-technique coincidences are before the great Wenchuan earthquake and its post-earthquakes. This is not only with one method, but with 13 different methods. Other interpretations are also discussed.

Address parsing is a crucial task in natural language processing, particularly for Chinese addresses. The complex structure and semantic features of Chinese addresses present challenges due to their inherent ambiguity. Additionally, different task scenarios require varying levels of granularity in address components, further complicating the parsing process. To address these challenges and adapt to low-resource environments, we propose CapICL, a novel Chinese address parsing model based on the In-Context Learning (ICL) framework. CapICL leverages a sequence generator, regular expression matching, BERT semantic similarity computation, and GPT modeling to enhance parsing accuracy by incorporating contextual information. We construct the sequence generator using a small annotated dataset, capturing distribution patterns and boundary features of address types to model address structure and semantics, mitigating interference from unnecessary variations. We introduce the REB-KNN algorithm, which selects similar samples for ICL-based parsing using regular expression matching and BERT semantic similarity computation. The selected samples, raw text, and explanatory text are combined to form prompts, and inputted into the GPT model for prediction and address parsing. Experimental results demonstrate significant achievements of CapICL in low-resource environments, reducing dependency on annotated data and computational resources. Our model's effectiveness, adaptability, and broad application potential are validated, showcasing its positive impact in natural language processing and geographical information systems.

Perovskite solar cells are an evolving technology owing to self-assembling and highly tunable bandgap properties of materials. In this context, thin films of perovskites have attracted immense attention and witnessed great advancement because of their low manufacturing cost. The key development in these devices is the conversion efficiency, which rose from 3.8% to 28%. The formulation of innovative materials with the proper replacement of lead in perovskites is imperative to mitigate lead toxicity. Here, we analyzed the challenges like material and structural stability, device stability under high temperature and humidity conditions, lifetime, manufacturing cost, etc. faced in the commercialization of perovskite devices. This review shows that challenges such as device engineering, performance stability against the harsh environment, cost-effectiveness, and environmental concern should be taken into consideration for the widespread acceptance of perovskite-based solar devices. In conclusion, we suggested that an enormous scope exists for exploring high-performance and long-lasting perovskites for energy applications.

Bridging the gap between traditional education and matching the pace of education with the rest of the world, Govt. of India implemented a new education policy this year which was much awaited for a long time. The new education policy is a big step to change India's overall education scenario by changing the examination pattern. However, this new type of decision-making process seeks to ensure that it achieves great benefits covering all uncovered elements while keeping technology as a parameter, so this new policy in the previous education system is also missing some key issues that must be addressed in the next amendments. Making it an example of impact, this paper describes salient issues where new educational policies are silent or those grey areas have been only superficially touched upon.

Symmetry concepts in parametrized dynamical systems may reduce the number of external parameters by a suitable normalization prescription. If, under the action of a symmetry group G, parameter space A becomes a (locally) trivial principal bundle, A ~ A/G x G, then the normalized dynamics only depends on the quotient A/G. In this way, the dynamics of fractional variables in homogeneous epidemic SI(R)S models, with standard incidence, absence of R-susceptibility and compartment independent birth and death rates, turns out to be isomorphic to (a marginally extended version of) Hethcote's classic endemic model, first presented in 1973. The paper studies a 10-parameter master model with constant and I -linear vaccination rates, vertical transmission and a vaccination rate for susceptible newborns. As recently shown by the author, all demographic parameters are redundant. After adjusting time scale, the remaining 5-parameter model admits a 3-dimensional abelian scaling symmetry. By normalization we end up with Hethcote's extended 2-parameter model. Thus, in view of symmetry concepts, reproving theorems on endemic bifurcation and stability in such models becomes needless.

We developed and applied a method for characterizing bacterial promoters genome-wide by in vitro transcription coupled to transcriptome sequencing specific for native 5’-ends of transcripts. This method called ROSE (Run-Off transcription/RNA-SEquencing), only requires chromosomal DNA, ribonucleotides, RNA polymerase (RNAP) core enzyme, and a specific sigma factor, recognizing the corresponding promoters, which have to be analyzed. ROSE was performed on E. coli K-12 MG1655 genomic DNA using E. coli RNAP holoenzyme (including σ70) and yielded 3,226 transcription start sites, 2,167 of which were also identified in in vivo studies, and 598 were new. Many new promoters not yet identified by in vivo experiments might be repressed under the tested conditions. Complementary in vivo experiments with E. coli K-12 strain BW25113 and isogenic transcription factor gene knockout mutants of fis, fur, and hns were used to test this hypothesis. Comparative transcriptome analysis demonstrated that ROSE could identify bona fide promoters that were apparently repressed in vivo. In this sense, ROSE is well-suited as a bottom-up approach for characterizing transcriptional networks in bacteria and ideally complementary to top-down in vivo transcriptome studies.

Oxidative stress has been implicated in cellular senescence and aging, as well as in the onset and progression of many diverse genetic and acquired diseases and conditions. The search for biomarkers of oxidative stress has become relevant to many biomedical fields using many different methods and approaches. Fluorescence methodology is advantageous because of its simplicity and high sensitivity. Fluorescent probes are frequently used to investigate the role of reactive oxygen species in oxidative stress in experimental or clinical settings, often involving the use of flow cytometry and related single-cell based technologies. To assess the specific role of reactive oxygen species in oxidative stress studies by cytometric methodologies, it is essential to detect and characterize these species accurately. However, the detection and quantitation of individual intracellular ROS is still a challenge, but different and complementary strategies may focus on other endpoints of oxidative stress. In this review we present and discuss briefly the limitations and perspectives of such approaches. Based on our results, we also provide recommendations for proper design of cytometric studies of oxidative stress in order to prevent or minimize experimental errors..

Over the past few decades, the quantity of construction waste has steadily risen in tandem with the expansion of construction activities and the rapid pace of development and urbanization. This problem is rooted in the practice of delivering materials to construction sites without totally using them for their intended purpose. The primary aim of the JIT tactic is to ensure that the precise materials required for production are available at the precise location, exact time, and appropriate quantity, thereby facilitating timely production. Presently, the use of ready-mix concrete is the most typical instance of a just-in-time construction process Developed countries have benefitted immensely from the use. However, the reverse is the case in developing countries like Nigeria, where indigenous contractors still employ traditional in-situ concreting even when faced with restrictive site space. This study focuses on investigating Ready-mix concrete, to project its immense benefits and effectiveness in minimizing lean construction waste. A survey research design and case study were adopted for this study, with the population being the management staff of construction firms in Lagos State, Nigeria. The questionnaire was used to collect data and the targeted respondents were purposively selected from the population. A total number of 112 questionnaires were administered with a response rate of 51%. Percentage, mean, standard deviation, and ANOVA were used to analyze the data. The mean value is above 3 on a Likert Scale of 5, while faster construction speed and uniform quality of concrete are the topmost benefits derived from adopting Ready-mix Concrete in Nigeria. The Case study also revealed the effectiveness of Ready-mix concrete in minimizing the two lean construction wastes that were examined, namely; waste of overproduction and waste of waiting. It is recommended Just-in-Time technique should be extended to other construction materials aside from concrete to improve waste minimization through the adoption of an overall JIT policy for the construction process.

Objective: To describe the methodology used and the results found in the implementation of Lean in Emergencies in the Emergency sector of the Hospital de Clínicas of the Federal University of Uberlândia (HC-UFU), verifying the difficulties and particularities that involved the process, as well as the result obtained. Material and methods: For the comparison between the periods before (T1), contemporary (T2) and after (T3) the implementation of Lean, hospital data were used , and the indicators corresponding to 10 variables were analyzed: Male Hospitalization and Female Hospitalization; High Male and High Female; Male Transfer and Female Transfer, Male Death <24h and Female Death <24h; Male Death >24h and Female Death >24h and general occupancy rate. All raw data related to the 36 months of evaluation were provided by the HC-UFU Statistics sector in spreadsheets without identifying patients. The indicators were compared to each other in the three analyzed periods, with the study directed as follows: Previous stage - Pre -intervention (T1): considered between the months of April 2017 to March 2018, completing 12 months before the implementation of Lean; Intra-intervention stage - contemporary (T2): considered between the months of April 2018 to March 2019, in a total of 12 months which was the implementation period; Post-Intervention Stage (T3): later: considered between the months of April 2019 to March 2020, completing 12 months after the implementation of Lean. The Lean in Emergencies scores (NEDOCS and LOS) were only recorded during the period that the implementation team was able to record and were used only to demonstrate trend over time. Comparison of the indicators with those found in other hospital units that also implemented Lean was carried out based on bibliographical research. Results and Discussion: The analysis of the behavior of the indicators did not demonstrate effectiveness related to the implementation of the system in the emergency sector. The failure to obtain better indicators can be attributed to discontinuity in monitoring the project, the lack of involvement of the clinical staff and alignment with the needs of the staff training academy, the difficulty of understanding the project by local and regional public entities. geographical location where the hospital is located, and by users of the health system who were not properly informed about the development of the project. These aspects should be considered in future management projects that may be implemented in the hospital. Despite the result of the implementation of Lean in the emergency sector not having reached the expected goals, the attempt showed windows of opportunity for future action on points that can improve the hospital management process and that should be tested in the next experiences. Conclusion: The methodology followed for the implementation of Lean in Emergencies in the emergency sector of the hospital did not produce improvement in hospital indicators.

Spatial biology is a rapidly growing research field which focuses on the transcriptomic or proteomic profiling of single cells within tissues with preserved spatial information. Imaging-based spatial transcriptomics uses epifluorescence microscopy, which has shown remarkable results for identification of multiple targets in situ. Nonetheless, the number of genes that can be reliably visualized is limited by the diffraction of light. Here, we investigate the effect of structured illumination (SIM), a super-resolution microscopy approach, over the performance of single gene transcript detection in spatial transcriptomics experiments. We performed direct mRNA-targeted hybridization in situ sequencing for multiple genes in mouse coronal brain tissue sections. We evaluated spot detection performance in widefield and confocal images versus those with SIM in combination with 20X, 25X and 60X objectives. In general, SIM increases the detection efficiency of gene transcripts spots compared to widefield and confocal modes. For each case, the specific fold increase in localizations is dependent on gene transcripts density and the numerical aperture of the objective used, which showed to play an important role especially for densely clustered spots. Taken together, our results suggest that SIM has the capacity to improve spot detection and overall data quality in spatial transcriptomics.

There are increasing calls in education for deeper integration of disciplines and better preparation for the personal and job challenges of a fast-changing and smarter society. Thus, we need to search for new effective didactic strategies. However, current classrooms are isolated. They practically never connect. This hinders the exchange of ideas. It inhibits imitation and recombination, the basic blocks of cultural evolution and innovation. In this paper, we analyze online inter-class tournaments. These are lessons where entire elementary or middle school classes interconnect synchronously and play an educational game. These are new types of academic activities, and only possible thanks to digital communication technology. In this paper, we examine four online tournaments, we analyze how feasible it is to carry them out and the benefits they bring. One tournament is for teaching machine learning and statistics. The second one teaches the conservation of momentum in physics and an engineering optimization challenge. The third tournament is for learning to solve word problems. The fourth one is for teaching natural and sexual selection along with developing statistical and population thinking. We found that these inter-class tournaments are feasible to implement in schools and that they are a promising mechanism to facilitate imitation, recombination, and innovation of teaching strategies.

The opioid crisis in the United States has had devastating effects on communities across the country, leading many states to pass legislation that limits the prescription of opioid medications in an effort to reduce the number of overdose deaths. This study evaluates the impact of two categories of PDMP and Pill Mill regulations on the supply of opioid prescriptions at the level of dispensers and distributors (excluding manufacturers) using ARCOS data. The study uses a difference-in-difference method with a two-way fixed design to analyze the data. The study finds that both of the regulations are associated with reductions in the volume of opioid distribution. However, the study reveals that these regulations may have unintended consequences, such as shifting the distribution of controlled substances to neighboring states. For example, in Tennessee, the implementation of Operational PDMP regulations reduces in-state distribution of opioid drugs by 3.36% (95% CI, 2.37 to 4.3), while the out-of-state distribution to Georgia, which did not have effective PDMP regulations in place, increases by 16.93% (95% CI, 16.42 to 17.44). Our studies emphasize that policymakers should consider the potential for unintended distribution shifts of opioid drugs to neighboring states with laxer regulations as well as varying impacts on different dispenser types.

Antimicrobial resistance is on the rise, and there aren't enough new treatments to combat it. This might send the modern world back to the pre-antibiotic age. The molecular hybrids of pyrazolo[3,4-b]pyridine and triazole have been designed, synthesized, and analyzed for their drug-like molecule nature and in vitro analyses for their inhibition potentials against S. Aureus and K. Pneumoniae. The compounds CY-R2-25 and CY-R2-28 have been identified as the high potential molecules in this series based on in vitro experiments. CY-R2-25 has zone of inhibition values of 15 0.82 and 14 0.7, whilst CY-R2-28 has the zone of inhibition values of 18 0.95 and 16 0.82 against S. Aureus and K. Pneumoniae, respectively. MIC and MIB values for CY-R2-25 and CY-R2-28 against S. Aureus and K. Pneumoniae are 0.25 and 0.5, respectively.

Anterior segment dysgenesis (ASD) encompasses a wide spectrum of developmental abnormalities of the anterior ocular segment, including congenital cataract, iris hypoplasia, aniridia, iridocorneal synechiae, as well as Peters, Axenfeld, and Rieger anomalies. Here, we report a large five-generation Caucasian family exhibiting atypical syndromic ASD segregating with a novel truncating variant of FOXC1. The family history is consistent with highly variable autosomal dominant symptoms including isolated glaucoma, iris hypoplasia, aniridia, cataract, hypothyroidism, congenital heart anomalies, and cystic kidney disease. Whole exome sequencing revealed a novel variant [c.313_314insA; p.(Tyr105*)] in FOXC1 that disrupts the alpha-helical region of the DNA-binding forkhead box domain. In vitro studies using a heterologous cell system revealed aberrant cytoplasmic localization of FOXC1 harboring the Tyr105* variant, likely precluding downstream transcription function. Meta-analysis of the literature highlighted the intrafamilial variability related to FOXC1 truncating alleles. This study highlights the clinical variability in ASD and signifies the importance of combining both clinical and molecular analysis approaches to establish a complete diagnosis.

To both survive and develop continuously, enterprises must overcome many kinds of competition and challenges. Cultivating employees' active and sustainable organizational citizenship behavior is important for enterprises to successfully cope with turbulence and uncertain events during their development. In this study, we investigated the development level of and factors influencing employees' organizational citizenship behavior in current organizations. By using the Belief in a Just World Scale, Organizational Citizenship Behavior Scale, and Interpersonal Intelligence Scale, we investigated 230 employees from 15 different enterprises. The results showed that belief in a just world, interpersonal intelligence, and organizational citizenship behavior were significantly positively correlated. Interpersonal intelligence played a moderating role between belief in a just world and organizational citizenship behavior; the organizational citizenship behavior of individuals with high interpersonal intelligence increased with the strengthening of the belief in a just world, and this increase was larger than that experienced by individuals with low interpersonal intelligence. This meant that under a certain level of belief in a just world, a high level of interpersonal intelligence was more conducive to promoting employees' sustainable organizational citizenship behavior.

Extensive in-situ resource utilisation (ISRU) will be essential to enable long-duration stays on Luna and Mars and reduce reliance on resupply from Earth. Early development of ISRU technologies has focused on standalone capabilities for specific targets related to life support and ascent propellant. An unexplored opportunity remains for greatly expanding the scope of materials that can be supplied by ISRU, and for integrating various technology platforms into a larger system. Recent advances in power-to-X technology aimed at decarbonising the global economy have made it possible to drive key chemical processes using electricity with small-scale, modular reactor. This paper proposes a vision for an integrated system of ISRU processes based on power-to-X technology to produce oxygen, hydrogen, water, methane, polymers, metal alloys, and synthetic fertilisers, using Martian regolith, atmosphere, and ice. A ‘building block’ strategy is adopted to convert raw materials into versatile intermediaries, which can then be combined to form essential products. A wider range of raw materials are available on Mars compared to Luna, suggesting greater opportunity for ISRU deployment to compensate for the greater time and cost requirements for a Mars resupply mission.

Background: We aimed to create a model of radiological and pathological criteria able to predict the upgrade rate of low-grade ductal carcinoma in situ (DCIS) to invasive carcinoma, in patients undergoing vacuum-assisted breast biopsy (VABB) and subsequent surgical excision. Methods: 3100 VABBs were retrospectively reviewed among which we reported 295 low-grade DCIS who subsequently underwent surgery. The association between patients’ features and the upgrade rate to invasive breast cancer (IBC) was evaluated by univariate analysis. Finally, we developed a predictive multivariable model based on the features which were significantly associated with the univariate analysis outcome. Results: the upgrade rate to invasive carcinoma was 10.8 %. At univariate analysis, the risk of upgrade was significantly lower in the absence of post- biopsy residual lesion (p<0.001), age > 50 (p=0.029), and in presence of low-grade DCIS only in specimens with microcalcifications (p=0.002). According to the final multivariable model, the predicted probability of diagnostic underestimation for a patient with all the three favourable features selected at univariate analysis was 1% (95% CI: 0.3%-4%). Conclusions: An easy to use predictive model of radiological and pathological criteria is able to identify patients with low-grade carcinoma in situ with low risk of upstaging to infiltrating carcinomas.

Urban air quality is increasingly being studied as a fraction of the world's population is now living in megacities. In this study, particulate matter (PM) along Taft Avenue, Manila, Philippines, is investigated in terms of its ability to induce genetic damage on human peripheral blood lymphocytes (PBL). Size-segregated roadside air samples were obtained from 2015-2016 near the university gate and analyzed using in vitro micronucleus and cytokinesis-block proliferation tests. While cellular proliferation was unaffected by 0 – 0.1 kg·m-3 of PM1.0 and PM2.5, PBL cells treated with PM2.5 displayed significantly higher micronucleus count (p = 0.03) compared to the cells treated with PM1.0. Atomic Absorption Spectroscopy revealed greater amounts of Cd, Ca, Pb, K, Na, and Zn in PM2.5 compared to PM1.0. The results indicate the differences in composition of the two size fractions of air particulates are associated with their genotoxicities.

Background: Adolescence is a developmental stage when there is a high risk of engaging in non-suicidal self-injury (NSSI). There is recent interest in the study of thwarted belongingness and perceived burdensome as variables associated with the frequency of NSSI in adolescents. Meaning in life (MIL) could be negatively associated with thwarted belongingness and perceived burdensome. To date, no studies have analyzed whether thwarted belongingness and perceived burdensomeness could be associated with the frequency of NSSI in adolescents. On the other hand, no studies have analyzed the buffering role of MIL in the association between thwarted belongingness and perceived burdensomeness and the frequency of NSSI. Aims: a) to test whether thwarted belongingness and perceived burdensomeness are associated with NSSI frequency; b) to test whether MIL moderates the association between thwarted belongingness and NSSI frequency; and c) to test whether MIL moderates the association between perceived burdensomeness and NSSI frequency. Method: The sample consisted of N = 1531 participants between 12 and 18 years old from Spain. The participants filled out the Inventory of Statements about Self-Injury, Purpose-In-Life Test-Adolescents Version, and Interpersonal Needs Questionnaire. Moderation analysis were performed. Results: Thwarted belongingness and perceived burdensomeness were positively associated with the frequency of NSSI in Spanish adolescents. MIL was a moderating variable between thwarted belongingness and the frequency of NSSI, and between perceived burdensomeness and the frequency of NSSI. Conclusion: Thwarted belongingness and perceived burdensomeness could be a risk factor for NSSI and MIL could be a protective factor against NSSI, and adding these variables to current descriptive theories of NSSI in adolescents would allow us to improve the assessment and treatment protocols for adolescents with NSSI.

The concept of DC power distribution has gained interest within the research community in the past years; especially due to rapid prevalence of solar PVs as a tool for distributed generation in DC microgrids. Various efficiency analyses have been presented for the DC distribution paradigm, in comparison to the AC counterpart, considering a variety of scenarios. However, even after a number of such comparative efficiency studies, there seems to be a disparity in the results of research efforts - wherein a definite verdict is still unavailable: 'Is DC distribution a more efficient choice as compared to the conventional AC system?' A final verdict is absent primarily due to conflicting results. In this regard, system modeling and the assumptions made in different studies play a significant role in affecting the results of the study. The current paper is an attempt to critically observe the modeling and assumptions used in the efficiency studies related to the DC distribution system. Several research efforts will be analyzed for their approach towards the system upon which they have performed efficiency studies. Subsequently, the paper aims to propose a model that may alleviate the shortcomings in earlier research efforts and be able to give a definite verdict regarding the comparative efficiency of DC and AC networks for residential power distribution.

Ethylene is a plant hormone controlling physiological and developmental processes such fruit maturation, hairy root formation and leaf abscission. Its effect on regeneration systems, such as organogenesis and somatic embryogenesis (SE), has been studied and progresses in molecular biology techniques have contributed to unveil mechanisms behind its effects. This compound affects regeneration differently, depending on the species, genotype and explant. In some species, ethylene seems to revert recalcitrance in genotypes with low regeneration capacity. However, its effect is not addictive, since in genotypes with high regeneration capacity this ability decreases in the presence of ethylene precursors, suggesting that regeneration is modulated by ethylene. Several lines of evidence have shown that the role of ethylene on regeneration is markedly connected to biotic and abiotic stresses as well as to hormonal-crosstalk, in particular with key regeneration hormones and growth regulators of the auxin and cytokinin families. Transcriptional factors of the ethylene response factor (ERF) family are regulated by ethylene and strongly connected to SE induction. Thus, an evident connection between ethylene, stress responses and regeneration capacity is markedly established. In this review the effect of ethylene and the way it interacts with other players during organogenesis and somatic embryogenesis is discussed.

3D-printed aluminium alloy fabrications made by selective laser melting (SLM) offer a promising route for the production of small series of custom-designed heat exchangers with complex geometry and shape and miniature size. Alloy composition and printing parameters need to be optimized to mitigate fabrication defects (pores and microcracks) and enhance the part performance. The deformation response needs to be studied with adequate characterization techniques at relevant dimensional scale capturing the peculiarities of micro-mechanical behavior relevant to the particular article and specimen dimensions. Purposefully designed Al-Si-Mg 3D-printable RS-333 alloy was investigated with a number of microscopy techniques including in situ mechanical testing with a Deben Microtest 1 kN stage integrated and synchronized with Tescan Vega3 SEM to acquire high resolution image datasets for Digital Image Correlation (DIC) analysis. Dog bone specimens were 3D-printed in different orientation of gauge zone cross-section with respect to the fast laser beam scanning and growth directions. This corresponds to varying local conditions of metal solidification and cooling. Specimens show variation in mechanical properties, namely, Young’s modulus (65…78 GPa), yield stress (80–150 MPa), ultimate tensile strength (115–225 MPa) and elongation at break (0,75–1,4 %). Furthermore, the failure localization and character was altered with the change of gauge cross-section orientation. DIC analysis allowed correct strain evaluation that overcame the load frame compliance effect and helped to identify the unevenness of deformation distribution (plasticity waves) that ultimately resulted in exceptionally high strain localization near the ultimate failure crack position.

The efficiency of producing embryos using in vitro technologies in livestock species rarely exceeds the 30 to 40% threshold, indicating that the proportion of oocytes that fail to develop after in vitro fertilization and culture is considerably large. Considering that the intrinsic quality of the oocyte is one of the main factors affecting blastocyst yield, the precise identification of non-invasive cellular or molecular markers that predict oocyte competence is of major interest to research and practical applications. The aim of this review was to explore the current literature on different non-invasive markers associated with oocyte quality in the bovine model. Apart from some controversial findings, the presence of cycle-related structures in ovaries, a follicle size between 6 and 10 mm, large number of surrounding cumulus cells, slightly expanded investment without dark areas, large oocyte diameter (>120 microns), dark cytoplasm, and the presence of a round and smooth first polar body have been associated to better competence. In addition, the combination of oocyte and zygote selection by BCB test and spindle imaging have the potential to further optimize the identification of oocytes with better developmental competence for in vitro-derived technologies in livestock species.

There are many new land use and land cover (LULC) products emerging yet there is still a lack of in-situ data for training, validation, and change detection purposes. The LUCAS (Land Use Cover Area frame Sample) survey is one of the few authoritative in-situ field campaigns, which takes place every three years in European Union member countries. More recently, a study has considered whether citizen science and crowdsourcing could complement LUCAS survey data, e.g., through the FotoQuest Austria mobile app and crowdsourcing campaign. Although the data obtained from the campaign were promising when compared with authoritative LUCAS survey data, there were classes that were not well classified by the citizens, and the photographs submitted through the app were not always of sufficient quality. For this reason, in the latest FotoQuest Go Europe 2018 campaign, several improvements were made to the app to facilitate interaction with the citizens contributing and to improve their accuracy in LULC identification. In addition to extending the locations from Austria to Europe, a change detection component (comparing land cover in 2018 to the 2015 LUCAS photographs) was added, as well as an improved LC decision tree and a near real-time quality assurance system to provide feedback on the distance to the target location, the LULC classes chosen and the quality of the photographs. Another modification was the implementation of a monetary incentive scheme in which users received between 1 to 3 Euros for each successfully completed quest of sufficient quality. The purpose of this paper is to present these new features and to compare the results obtained by the citizens with authoritative LUCAS data from 2018 in terms of LULC and change in LC. We also compared the results between the FotoQuest campaigns in 2015 and 2018 and found a significant improvement in 2018, i.e., a much higher match of LC between FotoQuest Go Europe and LUCAS. Finally, we present the results from a user survey to discuss challenges encountered during the campaign and what further improvements could be made in the future, including better in-app navigation and offline maps, making FotoQuest a model for enabling the collection of large amounts of land cover data at a low cost.

Almost fifty years after the first installations, I identify the main lessons learned from fighting drought and poverty in Africa with direct solar-powered pumps thanks to Father Bernard Verspieren and Mali Aqua Viva. Six main findings and three main recommendations emerge from the present analysis. They are of direct relevance to all Africa’s countries whose population has gone from 438 million in 1977 to 1,308 million in 2019, with about 600 million still having no access to electricity. In place of “awareness campaigns” and extraordinary courses held by international organizations, I recommend to establish national solar energy institutes whose task will include the education of solar energy professionals giving practice-oriented workshops on solar-powered drip irrigation and rainwater harvesting throughout each Africa’s country. Said education will critically include the economic and social aspects of distributed “generation” of energy and water from sunlight and rainfall.

The terms 'open' and 'openness' are widely used across the current higher education environment particularly in the areas of repository services and scholarly communications. Open-access licensing and open-source licensing are two prevalent manifestations of open culture within higher education research environments. As theoretical ideals, open-licensing models aim at openness and academic freedom. But operating as they do within the context of global neoliberalism, to what extent are these models constructed by, sustained by, and co-opted by neoliberalism? In this paper, we interrogate the use of open-licensing within scholarly communications and within the larger societal context of neoliberalism. Through synthesis of various sources, we will examine how open access licensing models have been constrained by neoliberal or otherwise corporate agendas, how open access and open scholarship have been reframed within discourses of compliance, how open-source software models and software are co-opted by politico-economic forces, and how the language of 'openness' is widely misused in higher education and repository services circles to drive agendas that run counter to actually increasing openness. We will finish by suggesting ways to resist this trend and use open-licensing models to resist neoliberal agendas in open scholarship.

The interfacial polymerization (IP) of piperazine (PIP) and trimesoyl chloride (TMC) has been extensively utilized to synthesize nanofiltration (NF) membranes. However, it is still a huge challenge to monitor the IP reaction, because of the fast reaction rate and the formed ultra-thin film. Herein, two effective strategies were applied to reduce the IP reaction rate: (1) the introduction of hydrophilic interlayers between the porous substrate and the formed polyamide layer, and (2) the addition of macromolecular additives in the aqueous solution of PIP. As a result, in situ Fourier transform infrared (FT-IR) spectroscopy was firstly used to monitor the IP reaction of PIP/TMC with hydrophilic interlayers or macromolecular additives in the aqueous solution of PIP. Moreover, the formed polyamide layer growth on the substrate was studied in a real-time manner. The in situ FTIR experimental results confirmed that the IP reaction rates were effectively suppressed and that the formed polyamide thickness was reduced from 138 ± 24 nm to 46 ± 2 nm according to TEM observation. Furthermore, an optimized NF membrane with excellent performance was consequently obtained, which included boosted water permeation of about 141–238 (L/m²·h·MPa) and superior salt rejection of Na₂SO₄ > 98.4%.

The ongoing electrification of the heat and transport sectors is expected to lead to a substantial increase in peak electricity demand over the coming decades, which may drive significant investment in network reinforcement in order to maintain a secure supply of electricity to consumers. The traditional way of security provision has been based on conventional investments such as the upgrade of the capacity of electricity transmission or distribution lines. However, the energy storage technology can also provide security of supply, thereby constituting a cost-efficient alternative to expensive conventional reinforcements. In this context, the current paper presents a methodology for the economic quantification of the security contribution of energy storage. This methodology makes use of mathematical optimization for the calculation of the F-factor metric, which reflects the optimal amount of peak demand reduction as compared to the power capability of the energy storage asset. In this context, a case study is presented in which the security contribution of energy storage is analyzed as a function of its power capability, energy capacity and efficiency as well as of characteristics of load patterns.

Objective: This study investigated the effect of the hierarchical medical system under the national health insurance program on resident’s healthcare-seeking behavior in Taiwan. Background: Healthcare authorities in Taiwan initiated the allowance reduction of outpatient visits at regional hospitals and higher hierarchical hospitals from 2018. The ultimate goal is to implement a hierarchical medical system and provide the residents accessible as well as consistent medical services. Methods: This research was conducted through the questionnaire survey method and data were collected between August and December 2018 from the records of subjects who had recently sought medical attention. A total of 1,340 valid questionnaires were returned. Results: Regarding the effect on healthcare-seeking behavior, the following factors were significant: being aged between 40 to 49 (p＜.1), subjects with an educational background of junior high school (p＜.05), those who were not aware of the policy (p＜.001), and an awareness about both the hierarchical medical system and the policy to reduce outpatient visits to large hospitals (p＜.001). Conclusion: The public should be made aware about the hierarchical medical system to improve healthcare.

There is still little research on psychological wellbeing and reported problems in preadolescents and adolescents under therapy for leukemia, also comparing them with their healthy peers. The present study aims to analyze the life perceptions, psychological well-being and problems’ intensity in these patients during the first year of therapy and to compare these reports with those of matched healthy peers adopting a battery of self-report questionnaires. Mann-Whitney tests identified the younger patients more at risk than older ones in their problems’ intensity and psychological symptoms. Older patients resulted instead more vulnerable regarding past life perceptions. Wilcoxon test with 2 dependent samples analyses showed that: healthy peers have a better perception of current life and lower percentage of somatization symptoms than patients after 6-months post-diagnosis. On the other hand, healthy peers reported more problems dealing with impulsivity, mood, disorganization, concentration and memory than patients both at 6-months and 1-year from diagnosis. Healthy peers reported also more anxiety and depression symptoms than patients and worse past and future life perceptions than patients at 1-year from diagnosis. The clinical aim is to perform a psychological screening of preadolescents and adolescents in order to prepare ad hoc psychological interventions.

Automatic methods for constructing navigation routes do not fully meet all requirements. The aim of this study was to modify the methodology for generating indoor navigation models based on the Medial Axis Transformation (MAT) algorithm. The simplified method for generating corridor axes relies on the Node-Relation Structure (NRS) methodology. The axis of the modeled structure (corridor) is determined based the points of the middle lines intersecting the structure (polygon). The proposed solution involves a modified approach to the segmentation of corridor space. Traditional approaches rely on algorithms to construct Triangulated Irregular Networks (TINs) by Delaunay triangulation or algorithms for generating Thiessen polygons known as Voronoi diagrams (VDs). In this study, both algorithms were used in the segmentation process. The edges of TINs intersect structures. Selected midpoints on TIN edges, which are located in the central part of the structure, are used to generate VDs. Polygon VDs segment corridor structures. The identifiers or structure nodes are the midpoints on TIN edges rather than the calculated centroids. The generated routes are not zigzag lines, and they approximate natural paths. The main advantage of the proposed solution is its simplicity which can be attributed to the use of standard tools for processing spatial data in a geographic information system.

The bark of Rhus verniciflua Stokes (RVS) is used as a food additive and herbal medicine for various inflammatory disorders and cancer in Eastern Asia. RVS exerted anti-inflammatory effects in lipopolysaccharide (LPS)-stimulated RAW264.7 cells, but whether this effect occurs in macrophages after oral administration has not been determined. We used a thioglycollate-induced peritonitis model to obtain macrophages from mice given RVS. We examined the systemic inflammatory response to intraperitoneal LPS. RVS-treated mice had an increased population of peritoneal exudate cells expressing CD11b and SRA. Increased uptake of Alexa Fluor 488-labeled acetylated lipoprotein was observed in monocyte-derived macrophages from RVS-treated mice. When these cells from the RVS group were stimulated with LPS, the levels of tumor necrosis factor (TNF)- and interleukin (IL)-6 in the supernatant decreased, but the level of IL-12 increased. The surface expression of CD86 was reduced, but surface expression of class II MHC molecules was increased. RVS suppressed the serum levels of LPS-induced TNF- and IL-6. RVS enhanced monocyte differentiation in thioglycollate-induced peritonitis by increasing scavenger receptor expression and activity. Macrophages isolated from mice given RVS responded differently to LPS. These findings demonstrate that RVS confers selective anti-inflammatory activity without causing the overall inhibitory effects on immune cells.

Legumes develop root nodules that harbour endosymbiotic bacteria, rhizobia. These rhizobia convert nitrogen to ammonia by biological nitrogen fixation. A thorough understanding of the biological nitrogen fixation in legumes and its regulation is key to develop sustainable agriculture. It is well known that plant hormones affect nodule formation; however, most studies are limited to model legumes due to their suitability for in vitro, plate-based assays. Specifically, it is almost impossible to measure the effects of exogenous hormones or other additives during nodule development in crop legumes such as soybean as they have huge root system in soil. To circumvent this issue, the present research develops suitable media and growth conditions for efficient nodule development under in vitro, soil free conditions in an important legume crop, soybean. Moreover, we also evaluate the effects of all major phytohormones during soybean nodulation under identical conditions. This versatile, inexpensive, scalable and simple protocol provides several advantages over previously established methods. It is extremely time-and resource-efficient, does not require special training or equipment, and produces highly reproducible results. The approach is expandable to other large legumes as well as for other exogenous additives.

Transition-metal-catalyzed amide bond formation from alcohols and amines is an atom-economic and eco-friendly route. Herein, we identified a highly active in situ N-heterocyclic carbene (NHC)/ruthenium (Ru) catalytic system for this amide synthesis. Various substrates, including sterically hindered ones, could be directly transformed into the corresponding amides with the catalyst loading as low as 0.25 mol%. In this system, we replaced the p-cymene ligand of the Ru source with a relatively labile cyclooctadiene (cod) ligand so as to more efficiently obtain the corresponding poly-carbene Ru species. Expectedly, the weaker cod ligand could be more easily substituted with multiple mono-NHC ligands. Further HR-MS analyses revealed that two tetra-carbene complexes were probably generated from the in situ catalytic system.

Advanced electrode designs have made single-unit neural recordings commonplace among modern neuroscience research. However, single-unit resolution remains out of reach for the intrinsic neurons of the gastrointestinal system. Single-unit recordings of the enteric (gut) nervous system have been conducted in anesthetized animal models and excised tissue, but there is a large physiological gap between awake and anesthetized animals, particularly for the enteric nervous system. Here, we describe the opportunity for advancing enteric neuroscience offered by single-unit recording capabilities in awake animals. We highlight the primary challenges to microelectrodes in the gastrointestinal system including structural, physiological, and signal quality challenges.

Nowadays, there are several electric vehicle (EV) on the market, due to the innovation of technology that promotes the new components such as battery, transmission, electric motors. This paper proposes a design approach for the configuration synthesis and simulation of the in-wheel-hub motor transmissions with the six-link mechanisms. The synthesis process shows 6 mechanisms with six members and eight joints, 15 new clutchless motor transmissions and 16 new clutched motor transmissions. A novel motor transmission in the feasibility of the synthesized configurations is selected as an example to analyze the working principle with operation modes and power flow paths. And, this design is modeled for the simulation process that generates the results of operation mode transition and energy regulation.

Lean is one of the systematic approach to achieve higher value for organizations through eliminate non-value-added activities. It is an integrated set of tools, techniques, and principles designed to optimize cost, quality and delivery while improving safety. In Vietnam, industry waste management and treatment has become serious issue. The aim of this research is to present the effective of Lean application for industrial wastes collecting and delivery improvement. Through a case study, this paper showed the way of Lean tools and principles applied for wastes management and treatment such as Value Stream Mapping, Pull system, Visual Control, and Andon.... to get benefit on both economic and environment. In addition, the results introduced a good experience for Vietnamese enterprises in cost saving and sustainable development in waste management.

The article presents the methodology for classifying economic regions with regards to selected factors that characterize a region, such as: the economic structure of the region, and thus the share of individual sectors in the economy; employment; the dynamics of the development of individual sectors expressed as an increase or decrease in production value; the population density in the region and also the level of occupational safety. Cluster analysis, which is a method of multidimensional statistical analysis available in Statistica software, was used to solve the task. The proposed methodology was used to group Polish voivodships with regards to the speed of economic development and occupational safety in the construction industry. Data published by the Central Statistical Office was used for this purpose, such as the value of construction and assembly production, the number of people employed in the construction industry, the population of an individual region and the number of people injured in occupational accidents.

Oxidative stress negatively affects folliculogenesis and embryo development. However, a reliable and biologically accurate indicator of oxidative stress does not yet exist. On these bases, the aim of this study was to assess -and compare- blood and follicular fluid (FF) redox status in 45 infertile subjects (and 45 age-matched controls) undergoing in vitro fertilization (IVF) and to establish its connection with the outcome of IVF. Blood and FF were obtained at the time of egg retrieval and immediately analyzed. Firstly, ROS production in blood leukocytes and in granulosa cells was assessed. Oxidative stress markers in blood and in granulosa cells resulted significantly (p<0.001) increased in infertile patients compared to controls. Then, a redox index was obtained in plasma and in FF of patients and controls. The main findings emerging from our study in infertile women are: i) blood oxidative stress reflects FF oxidative stress as demonstrated by the significant correlation between blood redox markers and FF redox markers; ii) a significant correlation between oxidative stress parameters and the considered IVF outcomes is present. We suggest the strict monitoring of the redox parameters for the improvement of assisted reproductive techniques success rate and infertility management.

Metal and alloy toughening was the core and long-term research direction in materials filed. As grain size had bimodal distribution, micro/nano-structured alloys presented excellent comprehensive mechanical properties, and this had become one of the research hotspots and developing trends in the field of nanotechnology. In-situ tensile test was a direct and effective method to study the deformation mechanism of materials, which revealed the multiple mechanisms responding to feature grain sizes and provided reliable experimental means and research technique. Research on development of in-situ technique and its applications in mechanical properties was reviewed in this paper according to the recent advances on the modern mechanical properties for high strength and high plasticity alloy at home and abroad. The disadvantages of the present study of preparation methods and investigation techniques for high-performance alloy had been concluded. Finally, the development prospects of high strength and high plasticity alloy materials were analyzed.

The formation of solid solution series Cs_1-xM_xGaQ₂-mC64 (M = K, Rb; Q = S, Se; x = 0–1) was studied by X-ray diffraction and spectroscopic methods, revealing a complete miscibility of CsGaQ₂-mC64 with RbGaQ₂ and KGaSe₂, and a large miscibility gap with KGaS₂. All solid solution members exhibit similar Raman spectra, indicating the covalent Ga-Q bonding character. The similar optical band gaps likewise further contribute to this conclusion. Up to a degree of substitution, these solid solutions undergo a phase transition similar to CsGaQ₂-mC64. The influence of the substitution parameter x on phase transition process was investigated in situ using high-temperature X-ray powder diffraction experiments. Phase-pure solid solutions of the high-temperature polymorphs Cs_1-xM_xGaQ₂-mC16 were obtained up to x_max(K) = 0.1 and x_max(Rb) = 0.3. The crystal structures of these new CsGaQ₂-mC16 analogous high-temperature phases were refined from synchrotron diffraction data by Rietveld-refinement.

Multiferroics, showing both ferroelectric and magnetic order, are promising candidates for future electronic devices. Especially, the fundamental understanding of ferroelectric switching is of key relevance for further improvements, which however is rarely reported in literature. On a prime example for a spin-driven multiferroic, LiCuVO₄, we present an extensive study of the ferroelectric order and the switching behavior as function of external electric and magnetic fields. From frequency-dependent polarization switching and using the Ishibashi-Orihara theory, we deduce the existence of ferroelectric domains and domain-walls. These have to be related to counterclockwise and clockwise spin-spirals leading to the formation of multiferroic domains. A novel measurement – multiferroic hysteresis loop – is established to analyze the electrical polarization simultaneously as a function of electrical and magnetic fields. This technique allows characterizing the complex coupling between ferroelectric and magnetic order in multiferroic LiCuVO₄.

Anaerobic digestion has the potential to convert organic waste materials into valuable energy. At the same time, using press water from biomass materials for energy generation, while taking advantage of the resulting cake for other purposes is an emerging approach. Therefore, this study aimed to investigate the residual potential expected from a typical biogas feedstock in the West African context after it has been mechanically separated into liquid and solid phases. Hence, in this study, the rumen contents of ruminants (cow, goat and sheep) and their proportionate ratios were obtained from an abattoir in Ghana. Resource characterisation of the waste samples were carried out in the Central laboratory of the HFR, Germany. Anaerobic batch tests for biogas (biomethane) yield determination were set-up using the Hohenheim Biogas Yield Test (HBT). Inoculum used was obtained from an inoculum production unit at the Hohenheim University biogas laboratory. The trial involved two different forms of the sample: mixture of rumen contents, press water, and inoculum, each in four (4) replicates. The trial was carried out at a mesophilic temperature of 37°C. Results obtained over a seventy (70) day period were transformed into biogas yields. Overall, the results show that the current contents are suitable for biogas generation as an option, as opposed to the current form of disposal at a refuse dump. However, using these mixtures in their original forms is more technically viable than using press water without further treatment.

Geological storage of carbon dioxide (CO2) is a crucial technology for mitigating global temperature rise. Near-depleted edge-bottom water reservoirs are attractive targets for CO2 storage, as they can not only enhance oil recovery (EOR) but also provide important potential candidates for geological storage. This study investigated CO2 enhanced oil recovery and storage for a typical near-depleted edge-bottom water reservoir that had been developed for a long time with a recovery factor of 51.93%. To improve the oil recovery and CO2 storage, new production scenarios are explored. At the near-depleted stage, by comparing the four different scenarios of water injection, gas injection, water alternating gas injection, and bi-directional injection, the highest additional recovery of 8.64% is achieved by the bi-directional injection scenario. Increasing the injection pressure leads to a higher gas-oil ratio and liquid production rate. After shifting from the near-depleted to depleted stage, the most effective approach to improve CO2 storage capacity is to increase reservoir pressure. At 1.4 times the initial reservoir pressure, the maximum storage capacity is 6.52×108 m3. However, excessive pressures boosting poses potential storage and leakage risks. Therefore, lower injection rates and longer intermittent injections are expected to achieve a larger amount of long-term CO2 storage. Through the numerical simulation study, a gas injection rate of 80,000 m3/day and a schedule of 4-6 years injection with 1 year shut-in was shown to be effective for the case considered. During 31 years of CO2 injection, the percentage dissolved CO2 increased from 5.46% to 6.23% during the near-depleted period, and to 7.76% during the depleted period. This study acts as a guide for the CO2 geological storage of typical near-depleted edge-bottom water reservoirs.

Despite nearly a century of research on water related issues, water erosion remains one of the greatest threats to soil health and soil ecosystem services around the world. Yet to date, data on water erosion needed to develop mitigation strategies is scarce, especially in the Sahelian regions. The current study therefore sets out to estimate annual soil losses caused by water erosion and to analyze trends over the period of 1981-2020 in the Mékrou watershed, located in the Middle Niger river sub-basin in West Africa. The revised universal soil loss equation, remote sensing and the Geographic Information System (GIS) were deployed in this study. Several types of data were used, including rainfall, soil conditions, topography and satellite images. The estimated average annual amount of water erosion in the Mékrou watershed is 6.49 t/ha/yr over 1981-2020. The dynamics of the ten-year average are highly variable, with a minimum of 3.45 t/ha/yr between 1981 and 1990, and a maximum of 8.50 t/ha/yr between 1991 and 2000. Even though these average soil losses in the Mékrou basin are below the tolerable threshold of 10 t/ha/yr, mitigation actions are needed for prevention. In addition, the spatial dynamics of water erosion are noticeably heterogeneous. The study reveals that 72.7% of the surface area of the Mékrou watershed is subject to slight water erosion below the threshold, compared with 27.3%, particularly in the mountainous south-western part, which is subject to intense erosion above the threshold.

To enhance the peak-shaving capability of the boiler, a mathematical model of hydrodynamic and wall temperature characteristics for the water-cooled wall of a 1000 MW boiler was established. The attributes pertaining to the mass flow distribution, the temperature of the effluent working fluid, pressure drop, and the thermal distribution across the wall surfaces at 30% of the boiler's maximum continuous rating (BMCR) were meticulously computed and subjected to a thorough analytical review. The findings suggest that, under the operation at 30% BMCR load, there is a substantial equilibrium in the flow distribution across the quartet of walls that constitute the water-cooled wall assembly. The maximum mass flow rate deviations in the helical and vertical sections are 1.95% and 3.47%, respectively, showing small flow deviations and reasonable distribution. The temperature deviation in the helical section is 0.3 °C, reflecting the characteristic low thermal deviation in helical tubes. While the temperature deviation at the outlet of the vertical section is higher, it remains within safe limits. The pressure loss across the water-cooled wall system amounts to 0.4 MPa. The peak wall temperature reaches 337.5°C, remaining within the material's permissible safety limits. In-depth performance analysis ensures the safe operating conditions of the water-cooled wall during low load conditions.

Electrolyzed water, which mainly contains hypochlorous acid, is widely used because of its strong microbicidal effects, biosafety, and eco-friendliness. For frequent use in intraoral treatments, we focused on neutral electrolyzed water (NW) produced using two-stage electrolysis and investigated its storage stability. For standard-concentration NWs with free available chlorine concentration (ACC) of 25, 35, and 50 mg/L and high-concentration NWs (100, 200, 300, 500, and 1000 mg/L), changes in the pH, oxidation-reduction potential, and ACC during 126 days of storage and the bactericidal efficacies were examined. Storage under non-shaded conditions at room temperature (LRT) and a higher ACC substantially altered the properties of the NW. NW (≤ 300 mg/L) had a pH of 5.9–7.3 even after storage under LRT; however, NW with higher ACC (500 and 1000 mg/L) had a pH ˂ 5.5, critical for human enamel), even under shaded and refrigerated conditions (SLW). Only NW (25 mg/L) stored under LRT exhibited the lowest ACC (5 mg/L), indicating a decreased bactericidal effect. When stored for use in intraoral treatments, NWs should be prepared with an ACC of 25–300 mg/L and stored in SLW. If diluted NW is used, the ACC should be checked and appropriately diluted every time.

Water quality control employs techniques mostly targeting individual analytes; group detection is also practiced, but the choice of group methods is limited, which supports interest in developing such methods. We have examined an interaction of hypochlorite with a chlorine-containing heptamethine carbocyanine dye in the presence of 30 organic and inorganic model analytes that were found to induce diverse color changes in the system. The main supposed mechanisms are retardation of the dye oxidation with hypochlorite (presumably by scavenging chlorine radicals) and substitution of chlorine atom in the dye by the most nucleophilic analytes (amines, amino acids, proteins, DNA, phenol). The grass-green substitution product is more contrastingly visible against the dark-purple hypochlorite oxidation product of the dye than against the original emerald-green dye. The indicator reaction is monitored photographically for 10–40 min and the images are processed using principal component analysis (PCA) or linear discriminant analysis (LDA), allowing for data convolution for the complex color transitions. Nitrogen compounds are discriminated from the others, and more reactive analytes (tryptophan, cysteine, bovine serum albumin, and DNA) are detected in the presence of less reactive ones in natural water. The system is promising for the development of group assays for dissolved organic matter and discrimination of water samples.

This study primarily investigates the effect of fly ash (FA) content on the mechanical properties and hydration performance of alkali-activated ground granulated blast furnace slag cements (AAGC), and compares the related properties with ordinary Portland cement (OPC). Additionally, the study examined the hydration products, thermal analysis, MIP, SEM, chemically bound water, and pH values of AAGC. The compressive strength of AAGC showed a retrogression phenomenon from 3 to 28 days, with the 14-day and 28-day compressive strengths of AAGC being higher than those of OPC. The AAGC with 20% FA content exhibits the highest 28-day compressive strength (75 MPa). The hydration heat release rate curved of OPC and AAGC can be divided into the initial induction period, induction period, acceleration period, deceleration period and steady period. As FA content increases, the 28-day pore volume of AAGC increased while pH values and chemically bound water decrease. SEM images of AAGC with low FA content showed more microcracks.

Stormwater runoff from large roads is a major source of pollutants to receiving waters. Porous pavements have been shown to substantially reduce many of these pollutants, but studies are lacking on arterial roads. We sampled typical stormwater pollutants in runoff from sections of an arterial road 9-16 years after installation of three pavement types: control with conventional asphalt, porous asphalt overly, and full-depth porous asphalt. Both types of porous pavements substantially reduced most of the stormwater pollutants measured. Total suspended solids, turbidity, total lead, total copper, and 6PPD-quinone were all reduced by &gt;75%. Total nitrogen, ammonia, total phosphorus, biochemical oxygen demand, total and dissolved copper, total mercury, total zinc, total polycyclic aromatic hydrocarbons, and di-2-ethylhexyl phthalate were all reduced by &gt;50%. Reductions were lower or absent for nitrate, orthophosphate, E. coli, dissolved lead, and dissolved zinc. Most reductions were statistically significant. Many pollutants exceeded applicable water quality standards in the control samples but met them with both types of porous pavement. This study demonstrates that porous overlays and full-depth porous asphalt can provide substantial reductions of several priority stormwater pollutants on arterial roads for many years after installation.

This paper introduces LUNARMINERS framework and applies it for lunar water-ice extraction in Shackleton Crater at the lunar South Pole. The LUNARMINERS combines artificial intelligence swarm robotics with biomimetic swarm behavior. In the proposed framework, the foraging behavior of ants, the light attraction behavior of fireflies, and the migratory flight strategy of wild geese have been comprehensively analyzed and applied to robotic swarms for lunar mining. This research takes into consideration important aspects of the lunar environment, such as permanently shadowed regions (PSRs) and communication limitations in lunar craters, by simulating them in Robot Operating System (ROS). The LUNARMINERS framework has advantages over other methods in that it allows for the survey of an area of 0.025 km2 per day while achieving 100% water-ice deposition effectiveness. Studies show that by applying the LUNARMINER framework, the exploration of the entire Shackleton Crater can be completed in 3.75 Earth years via 15 robots. Simulations of the implementation of the proposed LUNARMINERS framework have demonstrated reliable high-levels of extraction efficiency, with the framework producing 12.9 metric tons of water-ice per day, which potentially can support up to 1,990 people per day based on astronaut’s daily water requirements from NASA's Human Integrated Design Handbook (HIDH) and thus, establishing a sustainable benchmark for lunar habitation. The results from this study show that the advances in the proposed LUNARMINERS framework can contribute to future lunar exploration and ISRU, setting new standards for sustainable off-Earth mining.

The backwater lowland habitats of large rivers, like the Mississippi River in North America, present complex often inaccessible environments for traditional capture-based fish biodiversity sampling. Our knowledge of the assemblages of fishes that occupy such habitats are often incomplete, and this can compromise management efforts. We employed environmental DNA (eDNA) metabarcoding methods to sample a Mississippi River bottom wetland system to assess ichthyofaunal diversity, and assemblage structure across habitat types, and we compared our results to capture-based survey records for the same habitats. We collected water samples in spring and fall of 2022 from slough, ditch, shallow lake and bayou habitats that varied in depth, vegetation, seasonal variability, and connectivity to the Mississippi River channel. We detected a diverse array of fish species that included 51 taxa. Nearly all species previously documented in the habitats were detected by eDNA metabarcoding, and we increased the number of documented species by more than a third. Most of the species were ubiquitous across the range of habitats, but there was also substantial assemblage structure, with some species exhibiting clear habitat specificity. Fall sampling was limited to the deeper bayou habitats where seasonal variation between spring and fall was minimal. eDNA metabarcode sampling was demonstrated to be effective at detecting invasive species as well as uncommon species, which included several species of conservation concern.

Legionella bacteria can proliferate in poorly maintained water systems, posing risks to users. All Legionella species are potentially pathogenic but Legionella pneumophila (L. pneumophila) is usually the primary focus of testing. However, Legionella anisa (L. anisa) also colonises water distribution systems, is frequently found with L. pneumophila and could be a good indicator for increased risk of nosocomial infection. Anonymized data from three commercial Legionella testing laboratories afforded analysis of 565,750 water samples. Data covered July 2019 to August 2021, including the COVID-19 pandemic. Results confirmed L. anisa commonly colonises water distribution systems, being the most frequently identified non-L. pneumophila species. Proportions of L. anisa and L. pneumophila generally remained similar but increases in L. pneumophila during COVID-19 lockdown suggests static water supplies might favour its growth. Disinfection of hospital water systems was effective but re-colonization did occur, appearing to favour L. pneumophila, although L. anisa colony numbers also increased as a proportion of the total. While L. pneumophila remains the main species of concern as a risk to human health, L. anisa’s role should not be under-estimated, either as a potential infection risk or as an indicator of the need to intervene to control Legionella colonization of water supplies.

The distribution of zakat, which is still carried out directly through mosques or zakat amil bodies, can hinder the payment process due to inaccurate calculations and difficulties in finding zakat amil institutions. In the digital era, information technology is very important in the management of zakat, alms, and infaq. Therefore, a zakat information management system was created. The e-Zakat program, developed using the waterfall method, plays an important role in five main aspects of zakat management: muzaki and mustahiq data collection, zakat collection, zakat distribution, mustahiq development, and reporting. The use of information technology in this program is expected to increase efficiency, accountability, transparency, as well as the reach of zakat and muzaki involvement.

During the 3rd millennium cal BC, the Indus communities exploited great quantities of chert from the Rohri Hills mines in Upper Sindh for making different types of artefacts. This paper discusses the way chert was transported to the Indus Civilization centres and the problems related to the type, quantity and quality of raw material and artefacts that were transported, when, why, and where. This paper raises the question of land and water transport. Both these methods were probably used according to the landscape location of the Indus sites. Another problem regards the landscape characteristics of the Indus Valley during the Bronze Age before the climate changes which took place around the end of the 3rd millennium cal BC, and the disappearance of the Hakra River, which was an important watercourse during the Indus phase. What do we know of the way the Indus communities exploited, transported, and circulated knappable chert? Why the Indus settlements excavated around the Rohri Hills, the largest chert mines of the Indian Subcontinent, have yielded little evidence of chert artefacts and nodules? What do we know of this important problem which is strictly related with the everyday life of the Indus communities and their economy? Why this problem has been systematically neglected by most archaeologists despite its importance?

This paper presents a comprehensive cost-benefit analysis of producing alternative phosphorus (P) fertilizers from recycled water treatment residuals (Fe-WTR) and cowshed effluents, under the umbrella of circular economy approach. Fe-WTR is compared to a synthetic adsorbent, layered double hydroxide (LDH). Dairy wastewater is used as a P source for both adsorbents. The cost of 1 ton P-Fe-WTR sums up to 329 Euro. In contrast, the use of synthetic adsorbents (P-LDH) incurs significantly higher costs, amounting to 3329 Euros per ton, underscoring the economic advantage of utilizing waste-derived materials. Adopting Fe-WTR fertilizer not only offers substantial cost savings by avoiding landfill fees (40-150 Euros per ton) and wastewater discharge fines (500 Euros per ton) but also reduces environmental impacts. This sustainable method mitigates eutrophication and pollution, presenting a dual benefit of cost-effectiveness and environmental protection. Although our results are based on a specific case study, they reflect the potential value of extending the circular economic approach to P production worldwide: Recycling P from waste streams can be economically viable and environmentally preferable at large, aligning with global sustainability goals and demonstrating the practicality of circular economy principles in environmental management.

Surface water plays a crucial role in climate change, human production, and life, making accurate monitoring and observation of surface water particularly important. However, due to the significant diversity and complexity of water distribution in surface space, accurate mapping of surface water faces considerable challenges. When extracting water bodies from medium-resolution satellite remote sensing images, CNN methods may suffer from limitations in receptive fields and insufficient context modeling capabilities, leading to the loss of water body boundary details and poor fusion of multiscale features. Currently, there is relatively little research on this issue; therefore, it is necessary to explore new combinations of deep learning networks to address these challenges. The purpose of this study is to address the above issues. We propose a new combination of deep learning networks that fully utilize multiscale information to enhance water features. Specifically, we first combine deformable convolutions with the Swin Transformer to increase effective receptive fields while better integrating global semantic information. This combination can capture features of water bodies at different scales, improve the accuracy and integrity of water extraction, and provide reliable technical support for detailed water body extraction. We tested the newly constructed model using Sentinel-2 satellite images. Our model achieved results of over 90%, with an average accuracy of 97.89%, average precision of 94.98%, average recall of 90.05%, and an average F1 score of 92.33%. In addition, our model achieved an accuracy of 98.03% in mountainous areas. Our experiments and results validate the potential of combining the Swin Transformer and deformable convolutions in detailed water body extraction.

A smart water quality monitoring system based on the Internet of Things (IoT) paradigm was designed to protect water resources from pollution in real-time. Long-range (LoRa) application of the low-power, wide-area networking (LPWAN) concept has become a phenomenon in IoT smart monitoring applications. This study proposes the implementation of a LoRa network in a water quality monitoring system-based IoT approach. The LoRa nodes were embedded with measuring sensors pH, turbidity, temperature, total dissolved solids (TDS), and dissolved oxygen (DO), in the designated water station. It operates at a transmission power of 14 dB and a bandwidth of 125 kHz. The network properties were tested with two different antenna gains of 2.1 dBi and 3 dBi with three different spread factors (SF) of 7, 9, and 12. The water stations were located at Sungai Pantai and Sungai Anak Air Batu, both rivers on the Universiti Malaya campus. Following a dashboard display and K-means analysis of the water quality data received by the LoRa gateway, it was determined that both rivers are Class II B rivers. The results from the evaluation of LoRa performance on the Received Strength Signal Indicator (RSSI), Signal Noise Ratio (SNR), loss packet, and path loss at best were -83 dBm, 7 dB, &lt; 0%, and 64.41 dB, respectively, with a minimum received sensitivity of -129.1 dBm. LoRa has demonstrated its efficiency in an urban environment for smart river monitoring purposes.

Soil water content (SWC) and soil organic carbon (SOC) are two important factors to consider when revegetation in degraded land of arid and semiarid areas. Knowing the response of SWC and SOC to vegetation restoration as well as their coupling interaction is important for sustainability of vegetation restoration. In this study, three common plantations of the same recovery years were selected on China’s Loess Plateau, which included Pinus sylvestris, Pinus tabuliformis and Populus simonii, to evaluate the response of SWC and SOC to vegetation restoration as well as their interactions, and then revealed the influencing factors of SWC and SOC variations. Results showed that compared to the grassland, three plantations all exacerbated the deficit of deep soil water, but Populus simonii increased the SOC, while the rest all decreased the SOC. And tradeoff of Populus simonii had the lowest root mean squared error (RMSD). Therefore, Populus simonii was identified as representing a suitable revegetation technique for this region. There was strong interaction between SWC and SOC for shallow soil layers. Land use type (LUT) has an important effect on deep SOC variations, while SOC and soil texture for deep SWC variations. The results were helpful to the sustainable development of artificial forests in this region as well as other similar arid and semiarid areas.

Nitrogen (N) is an essential macro nutrient for crop growth; therefore, N deficit can greatly limit crop growth and production. In the North China Plain (NCP), winter wheat is one of the main food crops, and its yield has increased from approximately 4000 kg ha-1 to 6000 kg ha-1 in the last two decades. Determining the proper N application rates at different growth stages and in all seasons is very important for the sustainable and high production of wheat in the NCP. A field experiment with five N application rates (250, 200, 150, 100, and 40 kgN·ha-1, designated as N250, N200, N150, N100, and N40, respectively) was conducted during the 2017-2018 and 2018-2019 winter wheat seasons to investigate the effects of the N application rate on water- and fertiliz-er-utilization efficiency, and on the crop growth and yield of winter wheat under sprinkler fer-tigation conditions. The results showed that, in the N application range of 40-200 kg ha-1, crop yield and water- and fertilizer-use efficiencies increased as the N application rate increased; however, further increases in the N application rate did not have additional benefits. The N up-take after regreening of winter wheat linearly increased with crop growth. Considering the wheat yield and N-use efficiency, the optimal N application range was 200 kg ha-1, and the best top-dressing strategy was equal amounts of N applied at the regreening, jointing, and grain-filling stages. The results of this study will be useful for optimizing field N management to achieve high wheat yield production in the NCP and in regions with similar climatic and soil environment conditions.

Preventing the rebound of black and odorous water bodies is critical for improving the ecological environment of water bodies. This study investigated the effect and mechanism of in-situ improvement of sediment microenvironment by nitrate in tailwater of wastewater treatment plants combined with aerobic denitrifying bacteria under low-DO regulation (TailN+CFM+LDO). On the 60th day of remediation, the dissolved oxygen and oxidation-reduction potential in the overlying water increased to 5.6 mg/L and 300 mV, respectively, the acid volatile sulfide in the sediment decreased by 70.4%, and the organic matter in the sediment was reduced by 62.7%, in which the HFOM was degraded from 105 g/kg to 56 g/kg, and the potential risk of water reverting to black and odorous conditions significantly decreased. Amplicon sequencing analysis revealed that the relative abundance of electroactive bacteria Thiobacillus and Pseudomonas with denitrification capacity was found to be significantly higher in the TailN+CFM+LDO group than in the other remediation groups. Functional prediction of 16S sequencing results indicated that both the quantity and activity of critical microbial enzymes involved in nitrification and denitrification processes could enhance in the TailN+CFM+LDO group. These results improved our understanding of the improvement of the sediment microenvironment and could thus facilitate its application.

The present study aims to unravel the mechanisms of salicylic acid and rehydration and the physiological benefits in pepper plants grown under water deficit. 3x4 factorial scheme adopted, with three water regimes (irrigated, dry and rehydration) and four SA concentrations, namely: 0 (control), 0.5, 1 and 1.5 mM. Evaluated leaf moisture percentage, leaf water potential, chlorophylls (a and b), carotenoids, stomatal conductance, chlorophyll a fluorescence and H2O2 concentration at different times throughout the day and water conditions (irrigated, dry and rehydration) and SA applications (without the addition of the regulator (0) and with SA addition at concentrations equal to 0.5, 1 and 1.5 mM). Exogenous SA application favored stomatal conductance responses(gs) and modified fluorescence parameters (Fm, Fo, Fm', Fo', Fv/Fm, qP, ETR and NPQ) of sweet pepper plants subjected to drought followed by rehydration. SA concentration of 0.5 mM allowed a more expressive recovery of gs indices, effective quantum yield of photosystem II, with emphasis on excess energy (E) and maximum quantum yield (FV/FM) over time in plants subjected to drought and rehydration. We discovered that the use of SA, especially in association with rehydration, by modulating the variables gs and chlorophyll a fluorescence, prevents damage to membranes and consequently mitigates water deficit in pepper plants.

The gas-water relative permeability curve plays a crucial role in reservoir simulation and development for condensate gas reservoirs. In this study, we conducted a series of high temperature and high pressure analysis experiments on real gas cores from Wells A and B in Block L of the Yinggehai Basin to investigate the effects of temperature, pressure, and different types of gas media on gas-water seepage. The experimental results demonstrate that: Temperature has a significant impact on both gas and water relative permeability, particularly on the former. As temperature increases, gas relative permeability shows a substantial increase while water relative permeability remains relatively unchanged. Under the same effective stress, increasing pressure causes downward shifts in both the gas and water relative permeability curves; however, there is a more pronounced decrease in gas relative permeability. Gas type has minimal influence on phase permeability except at higher water saturation where differences become apparent. When water saturation ranges from 80% to 50%, there is no significant variation observed in the measured relative permeability of different displacement gases; however, as water saturation exceeds 80%, distinctions gradually emerge. At bound water saturation conditions, nitrogen exhibits lower relative permeability compared to simulated gases with approximately 92% similarity between them. This investigation into the characteristics of gas-water relative permeability in high temperature and high pressure condensate reservoirs within Yinggehai Basin provides valuable insights for efficient development strategies for similar reservoirs.

This study examined the impact of differences in fruit load of olive trees on the rate of stem refilling. The experiment was conducted in a commercial olive orchard over the consecutive years of 2021 and 2022, during which the biennial bearing cycle of olive trees resulted in minimal fruit production in 2021 and maximal production in 2022. The rate of stem refilling was determined by quantifying the differences in water volume traversing the apex and base of the principal branches of experimental trees using sap flow sensors. Concurrent measurements of tree water status were also conducted using psychrometers, while soil moisture content dynamics were continuously recorded. Results indicate that alternate bearing significantly influences the stem refilling process, while soil moisture availability also plays a pivotal role. Water reserves were more intensively utilized during the year of full production (“ON” year) primarily to fulfill the water demands of developing fruits. This replenishment occurred in various periods during the day, including early morning, afternoon, and night, when stomatal conductance measurements indicated stomatal closure. The study suggests a more intense replenishment of reserves during the night in "ON" year trees, irrespective of soil moisture, water vapor pressure deficit, or phenological fruit development stage.

The theory of water transport in trees, according to which the main driving force of water movement is the suction created by the evaporation of water by the meniscus (the curved surface of the capillary liquid column) on the evaporating elements, supported from below by root pressure, is flawed. The capillary effect in nature is around one meter. In the case of open-air gaps, the leaf cannot suck in the water against gravity because, in this case, the plant would not be sucking in water, but air through the open-air gap. If not, how do trees transport water? When evaporation occurs, there is no suction towards the canopy, but pressure is due to a reduction in the cross-section of the water pipe caused by heat loss through evaporation. At night, when evaporation stops, a thermal equilibration process is triggered, which restores the original cross-section of the pipe. This generates suction and draws water from the soil. As the hydrostatic pressure in the pipe is high for tall trees, the pipe is cut off. To prove my theory, I have given several examples. Water transport is not based on physical mechanical laws alone. There may be complex physiological, biochemical, and biophysical processes behind the operation of the pipe system.

The escalation of mining activities in the karst regions of Guizhou Province has heightened the occurrence of water-inrush incidents in deep coal mines. This study focused on water-inrush phenomena within the Xinhua mining area of Jinsha County, Guizhou Province, aiming to investigate the sources of these incidents. The findings indicated that the overlying limestone of the Changxing Formation in the coal seam served as a vulnerable aquifer under certain conditions, leading to water inrushes. The analysis of the spatiotemporal distribution patterns of water-inrush incidents at the working face indicated that previous mining operations damaged the shallow Changxing Formation limestone, resulting in the accumulation of goaf water and the formation of numerous mining-induced fractures. These fractures served as rapid conduits for water inrushes from both atmospheric precipitation and underground sources at the deep working face. The examination of surface water and mine water quality demonstrated that both exhibited similar characteristics, predominantly featuring bicarbonate, sulfate, and sodium compositions. Investigation into the relationship between mine water inflow and atmospheric precipitation established that atmospheric precipitation influenced the mine water supply cycle, with a replenishment period of ~10 months during the operational phase of the Jinyuan Coal Mine and about one month post-closure. The fractures induced by mining activities within the Changxing Formation limestone facilitated water flow, with atmospheric precipitation serving as the primary water source for the mine. This study offered a valuable scientific foundation for addressing water-related damage resulting from atmospheric precipitation in mines susceptible to water inrushes under analogous hydrogeological conditions.

This study delves into the complex dynamics of Underwater Wireless Optical Communication (UWOC) in varied Harbor water conditions. Focusing on four distinct types of Harbor water, the research employs the Monte Carlo method to simulate photon transmission and analyze critical UWOC characteristics. Key parameters such as the transmitted full divergence angle, received aperture, and Field of View (FOV) are meticulously evaluated for their impact on communication efficacy. The study first explores the relationship between laser power variation, attenuation length, and divergence angle, revealing how different water qualities influence received power and time delay spread. Notably, the received normalized power loss and time delay spread are found to be more significantly affected by communication distance than water quality. In addition, under the condition of small received aperture and FOV, the influence on normalized power loss and time spread is more obvious in Harbor water. The findings offer novel insights into the challenges of UWOC in Harbor waters, particularly in terms of light scattering and absorption properties, and contribute to the optimization of communication systems in such complex underwater environments. Furthermore, the analysis of time pulse spread in turbid water quality is of great significance for the analysis and improvement of underwater wireless optical timing, ranging and positioning.

Water area segmentation in remote sensing is of great importance for flood monitoring. To overcome some challenges in this task, we construct the Water Index and Polarization Information (WIPI) multi-modality dataset and propose a multi-Modality Fusion and Gated multi-Filter U-Net (MFGF-UNet) convolutional neural network. The WIPI dataset enhances the water information and reduces the data dimension. In particular, the Cloud-Free label provided in the database effectively mitigates the issue of scarcity of labeled samples Since a single form or uniform kernel size cannot handle the variety in size and shape of water bodies, we proposed the gated multi-filter inception (GMF-Inception) module in our MFGF-UNet. Moreover, we utilize the attention mechanism by introducing the Gated Channel Transform (GCT) skip connection and integrating GCT into GMF- Inception to further improve model performance. Extensive experiments on three benchmarks, including WIPI, Chengdu and GF2020 datasets demonstrate that our method achieves favorable performance with lower complexity and better robustness against six competing approaches. For example, on WIPI, Chengdu and GF2020 datasets, the proposed MFGF-UNet model achieves F1 of 0.9191, 0.7410, and 0.8421, respectively, which average F1 on three datasets is 0.0045 higher than the U-Net model and reduces 62% average GFLOPs. New WIPI dataset, code and trained models have been released on GitHub

This paper presents the design and experimental results of a long cavity length Nd: YAG laser with large stable zone for water jet guided laser (WJGL) applications. The design is based on the light transmission matrix and resonator stability conditions, aiming to achieve a large stable zone and a short cut-off thermal focal length (CTFL). A folded concave resonator is researched to enhance the cavity length, and the influence of the tun-able cavity arm length on the oscillating beam in the resonator and in the YAG crystal is theoretically studied. Moreover, the effects of the output mirror curvature and the cavity arm length on the range of the stable area and the cut-off thermal focal length are also investigated. Experimental results show that a stable green laser output is obtained after second harmonic generation (SHG), with a pulse width ranging from 43ns to 143ns within the laser operating frequency range of 5-20kHz. At an operation frequency of 10kHz, the output power is 21.33W, and the instability of the output power within 400 minutes is 0.88%. The laser source achieves a maximum power of 25.7W at 20kHz, and the maximum single pulse energy reaches 2.7mJ at 6kHz. Finally, this is used as the laser source to couple with a water jet with a diameter of 100 microns, achieving a lossless water conductivity transmission over 60mm length with a peak power density of 0.742GW/cm2. These results demonstrate the suitability of the designed laser source for WJGL technology research.

Rapid draw-down in an earthfill dam has serious implications for dam safety regarding slope stability. The evaluation of reservoir draw-down impact on slope stability was carried out considering the case study of 8 hours of rapid draw-down of the Middle Marsyangdi Hydroelectric Power Project (MMHPP) rock-fill dam using the Limit Equilibrium Method (LEM) and stress-based Finite Element Method (FEM). The time-dependent factor of safety (FOS) was evaluated and found that the 8 hours of rapid draw-down undertaken in October 2012 for reservoir flushing was unsafe with a draw-down rate of 1.91m/h. The resulting FOS of 1.28 and 1.27 using LEM and FEM was classified as unsafe as per the US Army Corps of Engineers’ guideline, the minimum required factors of safety should be greater than 1.3. The minimum safe allowable draw-down rate of 0.76m/h for 20 hours was identified. Applying three layers of horizontal filter materials and increasing the upstream dam’s permeability provided adequate FOS results for all cases by increasing seepage discharge to reduce the destabilizing excess pore water pressure. Several gradual draw-down rates were also tested and found that FOS increases with decreased draw-down rates, as it reduces the excess pore water pressure controlled with stabilizing existing water load.

Manufactured sand and natural sand have great differences in terms of physical properties, chemical composition, and so on. In the mix ratio design of manufactured sand concrete, the traditional common concrete ratio cannot be used. The water-cement ratio playing a crucial role in the mix ratio design. The optimum water-cement ratio can not only improve concrete performance, it can also reduce cement consumption and costs. The present study examines the working performance indicators and mechanical performance indicators of manufactured sand concrete using Fujian granite with three strength grades (C35, C40 and C50) at different water-cement ratios. The impact of water-cement ratio on the operational and mechanical performance of manufactured sand concrete with different strength grades is analyzed and summarized. Revised sentence: The findings suggest that the workability of Fujian granite concrete is directly influenced by the water-cement ratio. Additionally, the water-cement ratio indirectly affects the mechanical properties of manufactured sand concrete. Finally, when changing the water-cement ratio, cube compressive strength, splitting tensile strength and bending strength exhibit similar trends. The optimal water-cement ratio for C35 concrete is determined to be 0.39, considering the workability and mechanical properties of Fujian granite manufactured sand concrete. Similarly, the optimal water-cement ratio for C40 concrete is 0.34, while for C50 concrete it is 0.32.

Saline water irrigation contributes significantly to forage yield. However, the salinity threshold for safe saline water irrigation of tall wheatgrass in coastal saline-alkaline land remains unclear. In this study, 2 g L‒1, 3 g L‒1, 4 g L‒1, 5 g L‒1, and 8 g L‒1 saline waters were used for irrigation. Two irrigations with 2+3 g L‒1 saline waters produced the highest yield, followed by one irrigation with 4 g L‒1 or 5 g L‒1 saline water. After rainfall’s leaching, the soil electrical conductivity (EC1:5) reduced by 41.7%‒79.3% for the saline water irrigation treatments. In combination with saline water irrigation, plastic film mulching can be used for sward establishment of seed propagated tall wheatgrass. However, irrigation with high salinity of drainage water enhanced the risk of plant death. Further, a pot experiment demonstrated that irrigation with 5 g L‒1 saline water led to the least reduction of forage yield and the highest crude protein content in leaves. However, the plants irrigated with ≥7 g L‒1 saline water enhanced soil salinity and reduced plant height, leaf size, and gas exchange rate. Conclusively, one irrigation with ≤5 g L‒1 saline water at the end of April or early May could be acceptable to maximize the forage yield of tall wheatgrass and minimize soil salinization risk in the coastal saline-alkaline land around the Bohai Sea.

Soil moisture plays a crucial role in various hydrological processes and energy partitioning of the global surface. The Soil Moisture Active Passive-Sentinel (SMAP-Sentinel) remote sensing technology has demonstrated a great potential in monitoring soil moisture at a scale greater than 1 km. This capability can be applied to improve weather forecast accuracy, enhance water management for agriculture, and climate-related disasters. Despite the techniques increasing used worldwide, its accuracy still requires field validation in specific regions like Thailand. In this paper, we report on extensive in-situ monitoring of soil moisture (from surface up to 1 m depth) at 10 stations across Thailand spanning the years 2021 to 2023. The aim was to validate SMAP surface soil moisture (SSM) Level 2 product over a period of two years. Using one month averaging approach, the study revealed linear relationships between the two measurement types, with the coefficient of determination (R-squared) varying from 0.13 to 0.58. Notably, areas with more uniform land use and topography such as croplands tended to have a better coefficient of determination. We also conducted detailed soil core characterization, including soil-water retention curves, permeability, porosity, and other physics properties. These soil properties were then used for estimating the correlation constants between SMAP and in-situ soil moistures using multiple linear regression. The results demonstrated R-squared values between 0.933 and 0.847. An upscaling approach of SMAP was proposed which showed a promising results when using 3-month average of all measurements in cropland together. The finding also suggest that the SMAP-Sentinel remote sensing technology exhibits significant potential for accurate soil moisture monitoring in diverse applications. Further validation efforts and research, particularly in terms of root zone depths and area-based assessments, especially in the agricultural sector, can greatly improve the technology’s effectiveness and usefulness in the region.

Bisphenol-A (BPA) represents an important co-monomer for obtaining polycarbonate, epoxy resins, flame retardants, in paint, and other chemicals products. Products containing BPA are widely used, and thus, we can find it in the environment: in the air, in the soil, in natural surface water and in sediments, underground water in landfills, and in wastewater. BPA disturbs human and animals’ health. This influences the enzymatic, androgenic, neurological, liver and reproductive systems at different stages of human life: like in fetal stage, children and adults’ stages. Taking these inconveniences into account, it is very important to remove BPA from water. Ultrasonic technology can be considered a verry sustainable and efficient method to remove BPA from water. The advantages of this method is easy to implement on existing water treatment and purification facilities, it does not produce residual compounds that produce sludge, the time required for degradation is of the order of 1-2 hours and the level of degradation is very high. In this work, we presented the studies on the efficiency of ultrasonics under air atmosphere on the degradation of BPA. The influence of the frequency and of some additional compounds such as carbon tetrachloride, FeSO4 7H2O (FS), and ethyl anthraquinone (EAC) was studied. Three different frequencies were used: 1146 KHz, 864 KHz, 580 KHz, at a power of 50 W. It was identified the efficiency of BPA degradation over a period of 60 minutes, with sampling every 15 minutes. Using the LC-MS/MS technique, the degradation compounds were identified that result from the application of ultrasound processes. Pathways of BPA degradation were also proposed.

We enhanced the agro-hydrologic VegET model to include snow accumulation and melt processes and the separation of runoff into surface runoff and deep drainage. Driven by global weather datasets and parameterized by Land Surface Phenology (LSP), the enhanced VegET model was implemented in the cloud to simulate daily soil moisture (SM), actual evapotranspiration (ETa), and runoff (R) for the conterminous United States (CONUS) and the Greater Horn of Africa (GHA). Evaluation of the VegET model with independent data showed satisfactory performance, capturing the temporal variability of SM (Pearson correlation r: 0.22–0.97), snowpack (r: 0.86–0.88), ETa (r: 0.41–0.97), and spatial variability of R (r: 0.81–0.90). Absolute magnitudes showed some biases, indicating the need of calibrating the model for water budget analysis. The seasonal Landscape Water Requirement Satisfaction Index (L-WRSI) for CONUS and GHA showed realistic depictions of drought hazard extent and severity, indicating the usefulness of the L-WRSI for the convergence of evidence toolkit used by the Famine Early Warning System Network to monitor potential food insecurity conditions in different parts of the world. Using projected weather datasets and landcover-based LSP, the VegET model can be used not only for global monitoring of drought conditions, but also for evaluating scenarios on the effect of a changing climate and land cover on agriculture and water resources.

Sedimentation processes have negative socioeconomic and environmental consequences, ranging from eutrophication phenomena, loss of water quality in surface water bodies, effects on the potential for hydroelectric generation, etc. Frequently, anthropic activity is the main cause that enhances these processes through changes in land use that can lead to landscape modifications. Therefore, it is relevant to evaluate this phenomenon and to be able to discriminate the influence of different land uses on the contributions to sediment loads at different scales. The novel Compound Specific Stable Isotopes technique allows the evaluation of sediment inputs associated with different land use changes in a study region. In the present work this technique was used in the Alhajuela Lake sub-basin, within the Panama Canal Watershed. The contribution levels of three (3) representative land uses (forest, pasture and sediment) in the study area were evaluated for the sediments present in sixteen (16) selected mixing points. The main contributions of the sources to the sediments present in the main rivers and tributaries flowing into Alhajuela Lake, in the sub-basin of the same name, were identified. The results obtained are consistent with observations and measurements of sedimentation in the study area.

To increase the efficiency of fuel processor and HT-PEMFC (High Temperature-Proton Exchange Membrane Fuel Cell) combined system, it is essential to improve the efficiency of a fuel processor. In this research, the fuel processor was simulated by Aspen Hysys® simulator, and effect of the various operating conditions on the total efficiency was investigated. Thermal efficiency of the fuel processor increased as the temperature and S/C (Steam to carbon) ratio increased, and the efficiency was higher at the S/C ratio of 3 than at the S/C of 4 at the reformer temperature of 700 ℃ and higher. Under the selected operating conditions of the fuel processor, recycling of unreacted hydrogen from the anode off gas (AOG) of the HT-PEMFC improve the overall efficiency of the combined fuel processer and HT-PEMFC by a factor of 1.28. Operating conditions where the AOG supplied excessive heat than required for fuel processor operation were excluded. The high-efficiency operating conditions of the fuel cell system were proposed with the target of 5 kW of output as the capacity of the household HT-PEMFC.

Energy demand has exponentially increased with the increase in the world population and ur-banization. Renewable energy is clean, renewable, and environmentally friendly. Hydrogen production through Proton Exchange Membrane (PEM) electrolyzer is an efficient way to produce renewable energy. The efficiency and energy consumption of the PEM electrolyzer depends on the feed water quality. In this report, we study the effect of pH, TDS, and conductivity on hydrogen production as well as energy consumption during the process. pH values (3, 7, 9), TDS values (300ppm, 600ppm, 900ppm), and conductivity values (30mS/cm, 70mS/cm, 100mS/cm) were studied to understand and optimize the hydrogen production using PEM electrolyzer. The in-vestigations showed that hydrogen production is significantly affected by pH, total dissolved solids, and conductivity, and the best levels of each variable were identified by extensive testing. The findings show both the scientific significance of proton exchange electrolysis in meeting the growing energy demands of society as well as the importance of knowing the influence that di-verse conditions have on the creation of hydrogen. Our research, in general, contributes to the expanding body of scientific knowledge on the topic of the effective production of hydrogen and offers useful insights for the continuation of investigation in this field.