Background: Resistance to antimalarial drugs often used in emerging countries, including combination therapies, has forced scientists to search for and develop drugs with novel mechanisms of action, especially resistance to Plasmodium falciparum and Plasmodium vivax, which are highly prevalent in Southeast Asia, Africa, and South America. Objective: evaluate whether there is a relationship between urinalysis and resistance to in-hospital treatment of malaria in Angola. Methodology: This was a cross-sectional, prospective study with a quantitative approach. Results: of the 214 patients, the resistance rate was 24.1%, men (53.6%), between 21 and 40 years old (72.7%), employees (46.4%), from peri-urban regions (77.7%), treated with artemether (90.9), with high parasitemia (57.7%) and after 5 days of treatment, remained hospitalized (61.4%). Was a significant relationship between resistance in unemployed individuals [OR: 0.03 (95% CI: 0.01-0.29), p =0.003] and high levels of parasitemia [OR: 1.09 (95% CI: 1.09-3.95), p=0.040], remained hospitalized for more than 5 days [OR: 5.28 (95% CI: 0.65-43.1), p=0.121] and death [OR: 2.59 (95% CI: 0.32-20.9), p=0.371] when compared with other subgroups. Was a significant relationship between resistance to clear urine [OR: 5.55 (95% CI: 0.72-42.7), p =0.016], few urinary crystals [OR: 11.3 (95% CI: 5.07-25.3), p <0.001] and who presented some microorganisms that were not bacteria or fungi [OR: 3.02 (95% CI: 1 .32-6.90), p=0.009]. Conclusion: urine results, especially the appearance of cloudy urine, the presence of few crystals, and the presence of other microorganisms that are not bacteria or fungi, may be clear signs of resistance to hospital treatment with injectable antimalarials.

In recent years, the emergence of the concept of immunometabolism has shed light on the pivotal role that cellular metabolism plays in both the activation of immune cells and the development of immune programs. The antiviral response, a widely distributed defense mechanism used by infected cells, serves to not only control infections but also to attenuates their deleterious effects. The exploration of the role of metabolism in orchestrating the antiviral response represents a burgeoning area of research, especially considering the escalating incidence of viral outbreaks coupled with the increasing prevalence of metabolic diseases. Here, we present a review of current knowledge regarding immunometabolism and the antiviral response during viral infections. Initially, we delve into the concept of immunometabolism by examining its application in the field of cancer—a domain that has long spearheaded inquiries into this fascinating intersection of disciplines. Subsequently, we explore examples of immune cells whose activation is intricately regulated by metabolic processes. Progressing with a systematic and cellular approach, our aim is to unravel the potential role of metabolism in antiviral defense, placing significant emphasis on the innate and canonical interferon response.

Student project management is becoming increasingly important in various settings such as technical clubs, planning clubs, and research laboratories. However, effective methodologies for managing student-led projects have not yet been established. This study aims to address key issues related to cost and motivation in student-led projects and propose effective improvement plans. The significance of this study lies in its potential to identify challenges faced in current student project management practices and offer solutions to mitigate risks. By sharing our findings, we aim to encourage further research on this topic and promote the adoption of effective methodologies for managing student-led projects.

In the era of massive construction, damaged and aging infrastructure are becoming more common. Defects, such as cracking, spalling, etc., are main types of structural damage that widely occur. Hence, ensuring the safe operation existing infrastructure through health monitoring has emerged as an important challenge facing structural engineers. In recent years, intelligent approaches, such as data driven machine and deep learning crack detection, gradually dominate over traditional methods. Among them, the semantic segmentation using deep learning models is a process of characterization of accurate location and portrait of cracks using pixel level classification. Most available studies rely on single model knowledge to perform this task. However, it is well-known that the single model might suffer from low variance and low ability to generalize in case of data alteration. By leveraging the ensemble deep learning philosophy, a novel corporative semantic segmentation of concrete cracks method called Co-CrackSegment is proposed. Firstly, five models, namely the U-net, SegNet, DeepCrack19, DeepLabV3-ResNet50, and DeepLabV3-ResNet101 are trained to serve as core models for the ensemble model Co-CrackSegment. To build the ensemble model Co-CrackSegment, a new iterative approach based on the best evaluation metrics, namely the dice score, IoU, pixel accuracy, precision, and recall metrics is developed. Results show that the Co-CrackSegment exhibits a prominent performance compared to core models and weighted average ensemble by means of the considered best statistical metrics.

Inflammation and immune cell dysfunction are critical facilitators of endometriosis pathophysiology. The diverse cellular fractions in the endometriotic microenvironment are represented mainly by glands and stroma, which are infiltrated by immune cells, including macrophages. Macrophages are renowned for stimulating lesion growth, vascularization, and innervation and contributing to pain in the disorder. By combining macrophages and endometriotic cells, we determined if resveratrol and its natural analogs can target the immune dysregulation and oxidative imbalance in endometriosis. We studied the effect of analyzed compounds on the expression of key inflammatory and oxidative stress markers, cytokines release, and ROS production by applying q-PCR, ELISA, Cytometric Beads Array, and multiplexed fluorogenic staining and flow cytometry analysis with bioimaging. The results showed that endometriosis-related macrophages treated with resveratrol or its derivatives have impaired expression of pro-inflammatory markers such as IL6, IL8, IL1B, TNF, CCL2, CXCL10, and PTGS2. This study also reported a pronounced antioxidant effect of the compounds by reducing the accumulation of free radicals in macrophages, which correlated with the transcript activation of detoxification enzymes (SOD, GPx). Considering the harmful macrophage action in endometriosis, we described the prospects for potential therapy based on regulating the immune microenvironment and reducing the accumulation of free radicals.

In a constantly transforming retail financial sector, TCS has established a strategic alliance with Cencosud Scotiabank, expanding its role beyond consultancy to become an essential partner in the journey of growth and transformation. This collaboration reflects a shared commitment to advancing together in the competitive world of retail financial services, driving significant strategic change at Cencosud Scotiabank. As part of this effort, TCS has co-designed a series of practical workshops aimed at fostering and expanding the culture of innovation within the organization. These practical workshops are fundamental in the transformation process, providing deep and practical learning that serves as a solid foundation for the desired change. Each workshop session, carefully designed and executed according to an innovation playbook, aligns visual thinking tools with practical techniques to ensure smooth and effective execution of the work. The goal of these efforts is twofold: on the one hand, to strengthen the culture of innovation at Cencosud Scotiabank through collaboration; on the other, to firmly center the organization around the customer. The workshops are not just meetings; rather, they are collaborative spaces where creativity, deep user understanding, and agility converge to shape innovative solutions.

Recognizing the critical impact of environmental factors on individuals, this study explores the relationship between environmental indoor pollutants (PM1, PM2.5, PM10, and CO₂) and students' basic emotional responses based on Ekman’s categorization. Conducted in a secondary school in Spain, it integrates IoT and image processing technologies to monitor air quality and emotions in real-time. Participants included 76 secondary school students and three teachers, with data collected over two months. The results showed significant correlations between PM levels and negative emotions such as anger and disgust, while CO₂ levels were associated with both negative and positive emotions, including happiness. Regression models demonstrated that environmental variables significantly predict basic emotions, highlighting the influence of indoor air quality. These findings emphasize the need for proactive air quality management in educational settings to enhance learning environments and support students' emotional well-being.

Background. Keyword co-occurrence analysis is a crucial tool for comprehending research trends, identifying relevant studies, and gaining insight into the connections between various concepts and topics. Objective. This study focuses on analyzing the co-occurrence of keywords using FP-growth algorithm and direct search methods. Materials and methods. The methodology involved extracting bibliometric data of Energies journal for 2023-2024 from MDPI publisher platform, keyword lemmatization and keyword co-occurrence estimation. Clustering and visualization were performed using Multidendrograms and Scimago Graphica software. Results. The results showed that the FP-growth algorithm can achieve a close match with the direct search results, which facilitates data preparation for clustering. In addition, finding the co-occurrence of three or more keywords significantly reduced the number of possible combinations, which allowed the identification of specific research topics. Conclusions. This study highlights the usefulness of the FP-growth algorithm in keyword analysis and provides insights into ways to refine search queries to abstract databases for the purpose of designing and writing literature and systematic reviews.

This study represents a significant stride in advancing furan chemistry, presenting the synthesis of high-molecular-weight polyfurfuryl alcohol (PFA) resin (Mw = 118,959 g/mol) from furfuryl alcohol (FA) using a co-catalytic system as against the conventional single-catalytic methods. The resulting PFA resin is fully characterised, and we conclude that it exhibits good shelf life and potential in diverse applications, serving as a standalone moulded material or contributing to composites, coatings, adhesives, and nanostructured carbons.

Decarbonization of air mobility requires the decarbonization of its energy. While biofuels will play an important role, other low carbon energy carriers based on electricity are considered: battery electrification, liquid hydrogen (LH₂) or eFuel, a hydrogen-based energy carrier. Each energy carrier has its own conversion steps and losses and its own integration effects with the aircraft. These combinations lead to different energy requirements and must be understood to compare their cost and CO₂ emissions. Since they are all electricity-based, this study compares these energy carriers using the well to rotor methodology when applied to a standard Vertical Take-Off and Landing (VTOL) air mobility mission. This novel approach allows one to understand that the choice of the energy carrier dictates the propulsive system architecture, leading to integration effects with the aircraft which can significantly change the energy required, from 400 to 2665 kWh for the same mission. These deviations lead significant differences in CO₂ emissions and costs. Battery electrification is impacted by the battery manufacturing but has the lowest electricity consumption. It is an optimum solution but only until the battery weight can be lifted. In all scenarios eFuel is more efficient than LH₂. We conclude that carrying the most efficient molecule in an aircraft pays the extra energy cost spent on the ground. Finally, we found that for each of these energy carriers, it is the electricity carbon intensity and price which will dictate the cost and CO₂ emissions of an air mobility mission.

Three different populations of sulfated polysaccharides can be found in the cell wall of the red alga Botryocladia occidentalis. In a previous work, the structures of the two more sulfated polysaccharides were revised. In this work, NMR-based structural analysis was performed on the least sulfated polysaccharide and its chemically modified derivatives. Results have revealed the presence of both 4-linked α- and 3-linked β-galactose units having the following chemical features: more than half of the total galactose units are not sulfated, the α-units occur primarily as 3,6-anhydro-galactose units either 2-O-methylated or 2-O-sulfated, and the β-galactose units can be 4-O-sulfated or 2,4-O-disulfated. SPR-based results indicated weaker binding of the least sulfated galactan to thrombin, factor Xa, and antithrombin, but stronger binding to heparin cofactor II than unfractionated heparin. This report together with our previous publication completes the structural characterization of the three polysaccharides found in the cell wall of the red alga B. occidentalis and correlates the impact of their composing chemical groups with the levels of interaction with the blood co-factors.

Reflux esophagitis, a treatment for gastric ulcers known as Ilaprazole (Ila), is not stable during storage and handling at room temperature, requiring storage at 5 degrees celsius. In this study, to address these issues with Ila, coformers rich in oxygen (O) and hydroxyl (OH) groups capable of forming hydrogen bonds with were selected. These coformers included Xylitol (Xyl), Meglumine (Meg), Nicotinic acid (Nic), L-Aspartic acid (Asp), and L-Glutamic acid (Glu). A 1:1 physical mixture of Ila and each coformer was prepared, and the potential for cocrystal for-mation was predicted using differential scanning calorimetry (DSC) screening. The results indi-cated the potential for cocrystal formation in the Ila/Xyl physical mixture. Subsequently, Ila and Xyl were mixed in ethyl acetate (EA) in a 1:1 ratio, and after 28 hours of slurry, the formation of Ila/Xyl cocrystal was confirmed through solid-state CP/MAS 13C NMR spectrum analysis, showing intermolecular hydrogen bonding and conformational changes. Furthermore, the 1:1 ratio of Ila/Xyl cocrystal was confirmed through solution-state NMR (1H, 13C, and 2D) molecular structure analysis. To assess the stability of Ila/Xyl cocrystal at room temperature, it was stored and com-pared with Ila at 25±2°C and relative humidity (RH) of 65±5% over three months. The results showed that the purity of Ila/Xyl cocrystal remained at 99.8% from the initial purity of 99.75% over the three months, while Ila was predicted to decrease from an initial 99.8% purity to 90% after three months. Additionally, at 25±2°C and RH 65±5%, a specific impurity B in Ila/Xyl cocrystal was observed to be 0.03% over three months, whereas Ila was predicted to increase from an initial 0.032% to 2.28% after three months. To evaluate the dissolution rate of Ila/Xyl cocrystal, a formulation was prepared and compared with Ila at pH 10, with a dosage equivalent to 10mg of Ila. The results showed that Ila/Xyl cocrystal reached 55% within 15 minutes and 100% within 45 minutes, while Ila was predicted to reach 32% at 15 minutes and 100% only after 60 minutes. However, overall, the Ila/Xyl cocrystal showed results equivalent to or exceeding the dissolution rate of Ila. Therefore, it is predicted that the Ila/Xyl cocrystal will maximize its effectiveness as a more convenient crystal structure for formulation development, allowing storage and preservation at room temperature without the need for the problematic 5°C refrigeration during ambient con-ditions and storage, addressing the issues associated with Ila.

The effects of co-addition CeO2 and SiC particles on the morphology, surface cracks, microstructure, precipitated phases and wear property of plasma beam spraying Fe55-based coatings on 1025 steel were investigated by optical microscopy (OM), scanning electron microscopy (SEM), energy-dispersive X-ray spectrometer (EDS), ultra-deep field microscope and wet sand rubber wheel friction tester, respectively. The results showed that the dendrite exhibited a directional growth pattern perpendicular to the substrate and the transitional states of microstructure with the co-addition CeO2 and SiC particles. With addition of CeO2 or SiC affected the flowability of molten steel at macro level, leading to a reduction in the liquid phase diffusion coefficient DL of Cr and C and resulted in a decrease in the G/R ratio. The dendrites changed into equiaxed grains. The main phase composition of Fe55 welding layer is Cr7C3, γ-Fe. The grain boundaries consisted mainly of a reticular eutectic structure. The worn-out uniformly surface of the Fe55+1.5 wt% SiC+0.01wt% CeO2 with Ra was 0.28 μm was smoother than that of other samples. The sub-wear mechanisms during the friction process were microploughing and microcutting. The hardness and toughness of Fe55+1.5 wt% SiC+0.01wt% CeO2 were well-matched, avoiding excessive microcutting and microplastic deformation.

A new copper(I) complex, [Cu2(L)2dppm](PF6)2 (1) [L = 3-(2-Pyridyl)-5,6-diphenyl-1,2,4-triazine and dppm: Bis(diphenylphosphino)methane] was prepared and characterized by IR, 1H-NMR, 31P-NMR spectroscopy, elemental and thermogravimetric analysis, and single-crystal X-ray diffraction technique. Complex 1 is a dinuclear compound, showing that L and dppm act as tridentate and bidentate chelating ligands, respectively. The two Cu(I) atoms exhibit a distorted tetrahedral coordination sphere embedded in N3P environments. The supramolecular interactions in the solid-state structure are characterized by C−H···N, C−H···F, C-H···π and π···π intermolecular interactions that were analyzed by inspection of the Hirshfeld surface and fingerprint plots. Additionally, the complex was studied experimentally in solution by UV–Vis spectroscopy and cyclic voltammetry; also, theoretical studies with Time-Dependent Density Functional Theory (TD-DFT) were performed. Moreover, the optical and electrochemical properties have been studied, focusing on the band gap. Compound 1 has been used as a co-sensitizer in a dye-sensitized solar cell, showing good activity.

The major challenge for membrane distillation (MD) is membrane wetting resistance induced by pollutants in the feed solution. The proposed solution for this issue was to fabricate membranes with hydrophobic properties. Hydrophobic electrospun Poly (vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) nanofibers membranes were produced for brine treatment using the direct contact membrane distillation (DCMD) technique. These nanofibers membranes were prepared from three different polymeric solution compositions to study the effect of solvent composition in the electrospinning process. Further, the effect of the polymer concentration was investigated by preparing polymeric solutions with three different polymer percentages: 6, 8, and 10%. All nanofibers membranes obtained from electrospinning were post-treated at varying temperatures. The effects of thickness, porosity, pore size, and LEP were studied. The hydrophobicity was determined by contact angle measurements, which were investigated by optical contact angle goniometry. The crystallinity and thermal properties were studied by DCS and XRD, while the functional groups were studied by FTIR. The morphological study was performed by AMF and described the roughness of nanofibers membranes. Finally, all nanofibers membranes have enough of a hydrophobic nature to be used in DCMD. PVDF membrane filter disc and all nanofibers membranes were applied in DCMD to treat brine water. The resulting water flux and permeate water quality were compared, and it was discovered that all produced nanofibers membranes showed good behavior with varying water flux, but the salt rejection was greater than 90%. A membrane prepared from DMF/acetone 5-5 with 10% PVDF-HFP provided perfect performance, with an average water flux of 44 kg.m-2.h-1 and salt rejection of 99.8%.

Coronavirus disease 2019 (COVID-19) is a potentially serious acute respiratory infection caused by the Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2). Since the World Health Organization (WHO) declared COVID-19 a global pandemic, the virus has spread to more than 200 countries with more than 500 million cases and more than 6 million deaths reported globally. It has long been known that viral respiratory tract infections predispose patients to bacterial infections and that these co-infections often have an unfavourable clinical outcome. Moreover, nosocomial infections, also known as health care-associated infections (HAIs), are those infections that are absent at the time of admission and acquired after hospitalization. However, the impact of coinfections or secondary infections on the progression of COVID-19 disease and its lethal outcome is still debated. The aim of this review was to assess the literature on the incidence of bacterial co-infections and superinfections in patients with COVID-19. The review also highlights the importance of the rational use of antibiotics in patients with COVID-19 and the need to implement antimicrobial stewardship principles to prevent the transmission of drug-resistant organisms in healthcare settings. Finally, alternative antimicrobial agents to counter the emergence of multidrug-resistant bacteria causing healthcare-associated infections in COVID-19 patients will also be discussed.

The reliability of Underwater Wireless Sensor Networks (UWSNs) is measured in terms of energy consumption (EC), end-to-end delay(E2E) and packet delivery ratio (PDR). The adverse effects of channel may cause data loss. Reducing delay up to possible extend improves the reliability of the network, also increasing the number of nodes in a particular network increase reliability. Besides, increasing the number of nodes improve reliability but also increase power consumption. In order to overcome these shortcomings, the two routing protocols are proposed in this paper, namely Delay and Reliability Aware Routing (DRAR) protocol and Cooperative Delay and Reliability Aware Routing (Co-DRAR) protocol for UWSNs. In DRAR protocol, network is divided into two equal regions where two sink nodes(SNs) are positioned at upper region of the network and two SNs are placed at the mid region of the network. The protocol choose the relay node based on residual energy (RE), distance and Bit Error Rate (BER). These parameters protect the data packets from corruption and also provide stable path (where nodes remain active for longer period and do not die quickly). The protocol uses single link and may get worse sometimes while changing channel circumstances. To address this problem, cooperative routing scheme is added to DRAR protocol in order to developed its enhanced version known as Co-DRAR protocol. The protocol works by allowing the destination to receive multiple copies of data packets in order to decide the quality of packets. The proposed protocols DRAR and Co-DRAR perform routing irrespective to geographical position of sensors nodes conversely to the some of conventional routing protocols that's way our propose protocol better perform than the well-known protocol i.e. Depth base routing (DBR) in terms of EC, E2E, PDR, dead nodes, packet drop ratio and number of alive nodes (ANs).

The management of urban water has evolved from single-function systems to more sustainable designs promoting society and nature as inputs to engineer novel infrastructure. In transdisciplinary research, co-design refers to a design thinking strategy in which people jointly frame a problem-solution. This article presents a conceptual framework to assess a case study focusing on the process of co-design and implementation of green infrastructure as a prototype for stormwater management. The evaluation is carried out from a self-reflective post-implementation perspective. Research activities are translated into the framework to evaluate conditions shaping the trajectory of the prototype. As a result, key aspects driving the research regarding levels of stakeholder participation and dimensions of power are identified. Planning resilient co-design strategies to retrofit urban spaces is necessary to avoid unintended consequences, especially at the initial experimental stages. This study aims to contribute to the continuous improvement of pilot strategies in urban spaces by providing a framework for a structured evaluation of research experiences.

Background. To improve maternal and child health, it is essential to adhere to health-promoting and preventive measures. However, reliable information as well as effective tools are not easy to identify in this field. Our cross-sectional study investigated the needs and expectations of expectant and new mothers and fathers -primary users of an app supporting the first 1000 days of life. Methods. Between May and August 2022, we recruited expectant and new parents by administering a 71-item 5-point Likert scale questionnaire related to content, functionalities, and technical features of a hypothetical app. We stratified responses by sociodemographic characteristics and then performed ward hierarchical clustering. Results. The 94 women and 69 men involved in our study generally agreed with the proposed content, but expressed low interest in certain app functionalities, especially those related to interaction mechanism and interactivity. Women were generally more demanding than men, and family income declined as the needs and expectations increased. Conclusions. Our findings, resulting from the engagement of end-users, may be useful for designers and technology providers to implement mHealth solutions that, in addition to conveying reliable information, are tailored to the needs and preferences of end-users in the first 1000 days of life.

Pharmaceutically active compounds and organic pollutants are becoming a major environmental dispute possessing serious threat to the water bodies and terrestrial ecosystem. Microorganisms are capable of the self-purification process, and hence the microbial degradation is considered a lucrative method to counteract the therapeutic and recalcitrant pollutants. Pharmaceutical toxicants in aquatic system can be treated by conventional wastewater treatment, but slow sludge settling, presence of mixture of pharmaceuticals and recalcitrant compounds often pose a potential ecological risk. Some microbial strains are very effective in reducing the chemical oxygen demand (COD), biological oxygen demand (BOD), total dissolved solids (TDS), and turbidity in pharmaceutical industrial wastewater treatment. The natural microbial community has a significant role in the ecological processes of pharmaceutical and organic compounds, including non-steroidal anti-inflammatory drugs, analgesics, blood lipid regulators and other micropollutants. Specific bacterial isolates can act as biodegraders, and fungal treatment could offer protection to the ecosystem. These microorganisms use the pollutants as their sole carbon source and transform the contaminants by co-metabolic pathways. Natural attenuation by native microorganisms, biostimulation and bioaugmentation are the processes employed to degrade the target contaminant. Microorganisms may also be genetically engineered to improve the neutralization efficiency, which would assist in the mineralization of the pollutants. Thus, employing microorganisms to detoxify the pollutants probably enhances the sustainable potential biodegradability, improves water quality standards and ensures eco-friendly alternative bioremediation strategy.

In the next decade, further digitalisation of the entire wind energy project lifecycle is expected to be a major driver for reducing project costs and risks. In this paper, a literature review on the challenges related to implementation of digitalisation in the wind energy industry is first carried out, showing that there is a strong need for new solutions that enable co-innovation within and between organisations. Therefore, a new collaboration method called the WeDoWind Ecosystem is developed and demonstrated. The method is centred around specific "challenges", which are defined by "challenge providers" within a topical "space" and made available to participants via a digital platform. The data required in order to solve a particular "challenge" is provided by the "challenge providers" under the confidentiality conditions they specify. The method is demonstrated via a case study, the EDP Wind Turbine Fault Detection Challenge. Six submitted solutions using diverse approaches are evaluated. Two of the methods perform significantly better than EDP’s existing method in terms of Total Prediction Costs (saving up to €120,000). The WeDoWind Ecosystem is found to be a promising solution for enabling co-innovation in wind energy, providing a number of tangible benefits for both challenge and solution providers.

There are two contrary opinions regarding the risk if mainland China (MC) moves away from its zero-COVID policy. Some experts think the risk shall be much lower than influenza as per MC’s own COVID-19 case fatality rate (CFR), while some other experts think the risk shall be much higher than influenza as per the COVID-19 CFRs of other regions. We elucidate here that this and multiple other striking differences in the CFR between various scenarios all support and substantially resulted from the view that good IDM is highly powerful to mitigate COVID-19, where IDM (isolation-disinfection-maintenance) means isolation of COVID-19 cases from other people, disinfection of their living environments, and health maintenance (e.g., rest, nutrition, breathing). The high effect of good IDM is also supported by the theoretic functions of IDM in minimizing co-infections and maintaining body functions, and the fact that all the 505 COVID-19 deaths reported in MC in 2022 before May 5 died directly of severe underlying diseases with COVID-19. Although it is tough for people in poverty to obtain good IDM, good IDM can be feasible at home for the most mild cases and in hospitals for the most severe cases. Therefore, good IDM can be crucial to mitigating COVID-19 worldwide. It also suggests that the risk for China to end its zero-COVID policy depends on China’s control policies or measures. Based on the effect of IDM, the cautious co-existence policy was proposed for COVID-19 control. This policy could reduce the whole death toll in MC because good IDM is non-specific and can reduce deaths of various other diseases. The cautious co-existence policy (non-specific) and the vaccination policy (specific) aid each other to mitigate COVID-19, and they cannot replace each other. Those who are qualified in health for vaccination should be vaccinated against COVID-19 timely.

The purpose of this study was to identify the factors that affect the mortality among adult HIV/TB co-infected patients and to see the nutritional difference among mortality in residence level. Retrospective cohort studies of 417 patients which fulfill our criteria were included. Multilevel logistic regression models were used. MLwiN and SPSS software are used to estimate the parameter. The variance of the random factor in the empty model was significant which indicates that there were residential differences in TB-HIV co-infected mortality and it shows multilevel analysis was an appropriate approach for further analysis. The prevalence of HIV/TB co-infected patients' death was 12.9% in study time. Functional status, age of patients, WHO clinical stages, nutritional status, CD4 counts, regimen, and BMI were found to be significant determinants of HIV/TB co-infected mortality. In our study, patients with the bedridden category of functional status, the fourth stages of WHO clinical stages (stage IV), patients with higher age, patients whose treatments were second-line regimen and low CD4 cell counts were more at risk of death. The study also revealed that; poor nutritional status increased the risk of mortality among HIV/TB co-infected patients and it varies among the residence of the patients (rural area were more at risk).

Threats emerging from microplastics pollution in the marine environment have received much global attention. This review assessed sources, fate, and impacts of microplastics in marine ecosystems and identified gaps. Most studies document ubiquity of microplastics and associated environmental effects. Effects include impacts to marine ecosystems, risks to biodiversity, and threats to human health. Microplastic leakage into marine ecosystems arises from plastic waste mismanagement and a lack of effective mitigative strategies. This review identified a scarcity of microplastics mitigation strategies across different stakeholders. Lack of community involvement in microplastic monitoring or ecosystem conservation exists due to limited existence of stakeholder co-management initiatives. Although some management strategies exist for controlling the effects of microplastics (often implemented by local and global environmental groups); a standardized management strategy to mitigate microplastics in coastal areas is urgently required. There is a need to identify focal causes of microplastic pollution in the marine environment through further environmental research. This would extend to creating more effective policies as well as harmonized and extended efforts of educational campaigns and incentives for counteraction and plastic waste reduction, while mandating stringent penalties for polluting the marine environment. This will help reduce microplastic leakage into the environment.

It was recently demonstrated that a co-planar capacitive sensor could be applied to the evaluation of materials without the disadvantages associated with the other techniques. This technique effectively detects changes in the dielectric properties of the materials due to, for instance, imperfections or variations in the internal structure, by moving a set of simple electrodes on the surface of the specimen. An AC voltage is applied to one or more electrodes and signals are detected by others. This is a promising inspection method for imaging the interior structure of the numerous materials, without the necessity to be in contact with the surface of the sample. In this paper, Finite Element (FE) modelling was employed to simulate the electric field distribution from a co-planar capacitive sensor and the way it interacts with a non-conducting sample. Physical experiments with a prototype capacitive sensor were also performed on a Plexiglas sample with sub-surface defects, to assess the imaging performance of the sensor. A good qualitative agreement was observed between the numerical simulation and experimental result.

Currently, one of the biggest issues when developing an ODS alloy is the competition established between the different oxide precursors during the precipitation of oxides which nature depends on their chemical composition. In the presence of various precursors, usually the one with the highest affinity to oxygen leads to the absence of the other oxides. In this work, a new process to equilibrate the local concentration of species and to decrease the competition among them is explained. A unique compound, containing the diverse oxide precursors as one complex oxide, is introduced in a prealloyed 14Cr Steel powder via mechanical alloying. Thus, generating environments enriched in Y, Ti and Zr which, after consolidation, refine the oxides precipitation improving the thermal stability of the alloy. SPS were used as consolidation technique to guarantee shorter sintering times and to maintain the nanostructure obtained. Mechanical properties were tested by tensile tests and Vickers microhardness.

Background: Co-infections of SARS-CoV-2 with respiratory viruses, bacteria and fungi have been reported to cause a wide range of illness. Objectives: We asses s the prevalence of co-infection of SARS-CoV-2 with seasonal respiratory viruses, document the respiratory viruses detected among individuals tested for SARS-CoV-2, and describe characteristics of individuals with respiratory virus co-infection detected. Methods: Specimens included in this study were submitted as part of routine clinical testing to Public Health Ontario Laboratory from individuals requiring testing for SARS-CoV-2 and/or seasonal respiratory viruses. Results: Co-infection was detected in a smaller proportion (2.5%) of individuals with laboratory confirmed SARS-CoV-2 than those with seasonal respiratory viruses (4.3%); this difference was not significant. Individuals with any respiratory virus co-infection were more likely to be younger than 65 years of age and male than those with single infection. Those with SARS-CoV-2 co-infection manifested mostly mild respiratory symptoms. Conclusions: Findings of this study may not support routine testing for seasonal respiratory viruses among all individuals tested for SARS-CoV-2, as they were rare during the study period nor associated with severe disease. However, testing for seasonal respiratory viruses should be performed in severely ill individuals, in which detection of other viruses may assist with patient management.

The complex interplay among pathogens, host factors, and the integrity and composition of the endogenous microbiome determine the course and outcome of gastrointestinal infections. The model organism Yersinia entercolitica (Ye) is one of the five top frequent causes of bacterial gastroenteritis based on the Epidemiological Bulletin of the Robert Koch Institute (RKI) published on September 10, 2020. A fundamental challenge in predicting the course of an infection is to understand whether co-infection with two Yersinia strains differing only in their capacity to resist killing by the host immune system may decrease the overall virulence by competitive exclusion or increase it by acting cooperatively. Herein, we study the primary interactions among Ye, the host immune system and the microbiota, and their influence on Yersinia population dynamics. The employed model considers two host compartments, the intestinal mucosa and lumen, commensal bacteria, the co-existence of wild-type and mutant Yersinia strains, as well the host immune responses. We determine four possible equilibria: the disease-free, wild-type-free, mutant-free, and co-existence of wild-type and mutant equilibrium. We also calculate the reproduction number for each strain as a threshold parameter to determine if the population may either be eradicated or persist within the host. We conclude that the infection should disappear if the reproduction numbers for each strain fall below one, and the commensal bacteria’s growth rate exceeds the pathogens’ growth rates. These findings will help inform public health control strategies. The supplement includes MATLAB source script, Maple workbook, and figures.

MicroRNAs are used as biomarkers for classification of cancer subtypes since certain miRNAs are differentially expressed in normal and patient samples. Moreover, miRNAs target mRNAs and can heavily influence Gene Expressions. Thus, deregulation of miRNAs is linked to various disorders. Thus, miRNAs can be used for prognosis and developing personalized health solutions for patients. Given the importance of miRNAs, there has been substantial work done in the field. In this paper, recent works in the field of using miRNAs expressions of patients were considered. A total of 20 papers were surveyed which utilized feature selection ensembles, fuzzy logic as well as deep learning. 10 papers have been reported which offer insight into how miRNAs can be utilized for subtype-specific or generalized cancer diagnosis.

Abstract The COVID-19 pandemic has tremendously affected the African continent and the rest of the world. Most businesses have closed and a lot of people have lost their jobs. The aviation industry has been shaken to the core with airlines losing millions of dollars and flights being cancelled. The tourism industry has consequently been affected due to restricted travel of tourists, impacting wildlife conservation and livelihoods. Schools, colleges and universities have been closed. The virus has infected millions of people and hundreds of thousands of people have died globally putting strain on health systems especially those of hard hit countries. Various countries all over the world have put measures to control the spread of the virus through lockdowns and social distancing policies. The reduced economic activities and mobility of people has resulted in improved air quality, cleaner water and beaches in some countries. However there are also negative impacts such as challenges in waste management, increased pharmaceutical and household waste and discovery of the corona virus in wastewater, a potential threat to public health. A considerable amount of research has been done on the socio-economic impacts of COVID-19 in Africa but there is still limited research on its impact on the environment. This paper serves to highlight the observed and potential environmental impacts of COVID-19 in Africa.

Hydrogen is useful as a fuel and could be produced by a variety of means. One approach uses artificial photosynthesis where energy from sunlight powers the splitting of water into hydrogen and oxygen. But, biological methods for producing hydrogen has emerged strongly over the past decades. In particular, specific microorganisms could use different substrates to produce hydrogen at differing yields. Such fundamental discoveries with industrial applications thus motivated the use of metabolic engineering approaches and methodologies in enhancing biological hydrogen production through a series of enzyme over-expression, pathway debottlenecking, and gene deletion. However, such approaches heavily rely on the selection of an appropriate microbial chassis for biohydrogen production. With the proper strain in hand, use of alternative substrates may engender greater hydrogen productivities. But learning from the bioprocessing field, co-culture of two compatible microorganisms have been sought after for improving biohydrogen production. In addition, thermophilic microbes may also be useful candidates for exploiting hydrogen production from composting. Future outlook in the field looks into filling our gaps in understanding of the metabolic network that feeds into hydrogen production in different organisms. But, more importantly, problems such as reduced growth rate in engineered microbes point to fundamental issues with using genetically engineered microorganisms for improved biohydrogen production, to which clever bioprocess engineering may yield solutions.

Biofilm-mediated infection is a major cause of bone prosthesis failure. The lack of molecules able to act in biofilms has driven research aimed at identifying new anti-biofilm agents via chemical screens. However, to be able to accommodate a large number of compounds, the testing conditions of these screenings end up being typically far from the clinical scenario. In this study, we assess the potential applicability of three anti-biofilm compounds (based on natural compounds) as part of implanted medical devices by testing them on in vitro systems that more faithfully resemble the clinical scenario. To that end, we used a competition model based on the co-culture of SaOS-2 mammalian cells and Staphylococcus aureus (collection and clinical strains) on a titanium surface. Additionally, we studied whether these derivatives of natural compounds enhance the previously proven protective effect of pre-incubating the titanium surface with SaOS-2 cells. Out of the three tested leads, one showed the highest potential, and can be regarded as a promising agent for incorporation into bone implants. This study emphasizes and demonstrates the importance of using meaningful experimental models, where potential antimicrobials ought to be tested for protection of biomaterials in translational applications.

In the present paper, Co-B/SiC composite coatings were obtained via electrodeposition from colloidal suspensions with different concentrations of SiC particles and subsequent heat treatments at 350 °C. The composition, morphology and structure of the Co-B/SiC composite coatings were analyzed using glow discharge spectrometry (GDS), scanning electron microscopy (SEM) coupled with energy-dispersive spectroscopy (EDS) and X-ray diffraction (XRD). Hardness and tribological properties were also studied. The results showed that an increase in the SiC concentration in the colloidal suspensions resulted in both an increase in the SiC content and a decrease in the B content in the obtained Co-B/SiC coatings. The Co-B/SiC coatings were adherent, glossy and soft and exhibited a homogeneous composition in all thicknesses. By contrast, an increase in the SiC particle content of the Co-B/SiC composite coating from 0 to 2.56 at.% SiC reduced the hardness of the film from 680 to 360 HV and decreased the wear volume values from 1180 to 23 mm³ N^-1 m^-1, respectively (that is, the wear resistance increased). Moreover, when the Co-B/SiC coatings with SiC content ranging from 0 to 2.56 at.% SiC were subjected to a heat treatment process, the obtained coating hardness values were in the range of 1200 to 1500 HV and the wear volume values were in the range of 382 to 19 mm³ N^-1 m^-1.

Renewable sources and electric distribution network can produce or make available a surplus of electric and thermal energies. The Intermediate Temperature Solid Oxide Electrolyzer (IT-SOE) fed by CO2-steam mixtures can store these electric and thermal energies producing CO-H2 mixtures with high conversion efficiency. Inside the IT-SOE, the CO2-steam mixtures are converted to CO-H2 mixtures and O2 through the cathode and anode electrochemical reactions and reverse water gas shift chemical reaction. In this article an IT-SOE stack fed by different types of steam mixtures was tested at different operating temperatures and the stack polarization and electric power curves were detected experimentally. At the highest hydrogen production operating temperature of the stack fed by steam mixtures, the experimental polarization and electric power curves of the stack fed by steam and CO2-steam mixtures were compared. A simulation model of the IT-SOE system (stack and furnace) fed by CO2-steam mixtures was formulated ad hoc and implemented in a Matlab environment and experimentally validated. At the highest hydrogen production stack operating temperature, the IT-SOE system thermal equilibrium current was evaluated through the simulation model. Moreover, the influence of this current on the IT-SOE system efficiency and the CO-H2 mixture degree of purity was highlighted.

The aim of this study was synthesize and evaluate the effects of Poly (D, L-Lactide-co-glycolide) (PLGA) Nanoparticles (NPs) of metformin (PLGA+ Met) on inflammation, and bone loss in a ligature-induced periodontitis rat model. The prepared NPs were characterized by mean diameter, size particle, polydispensity index and encapsulation efficiency by Atomic force microscopy (AFM). Male albino Wistar rats were randomly divided into four groups of 20 rats in each group, and given the following treatments for 10 days to evaluate in vivo activity: (1) Sham: no ligature + water; (2) Positive control: ligature + water (with Periodontal disease and Diabetes); (3) ligature + PLGA+ 10 mg/kg Met (With Periodontal disease and Diabetes); and (4) ligature + PLGA+ 100 mg/kg Met (with Periodontal disease and Diabetes). Water or PLGA + Met was administered orally by gavage. Maxillae were fixed and scanned using Micro-computed Tomography (μCT) to quantify linear of bone loss. Histopathological characteristics were assessed through immunohistochemical staining for Osteocalcin, Cathepsyn K, RANKL/RANK/OPG pathway. IL-1β and TNF-α from gingival tissues were analysed by Elisa immunoassay. Quantitative RT-PCR reaction was used to evaluate gene expression of AMPK, NF-κB p-65, Hmgb1 and TAK-1 from gingival tissues. Statistical analysis was performed using one-way ANOVA at 5% significance. The mean diameter of MET-loaded PLGA nanoparticles was in a range of 457.1 ± 48.9 nm with a polydispersity index of 0.285, zeta potential: 8.16 ± 1.1 mV and entrapment efficiency (EE) was 70%. The results suggest that the addition of MET in the core slightly affected the particle sizes. Treatment with PLGA+ 10 mg/kg Met showed low inflammatory cells, decreased bone loss and integrity cement and levels of IL-1β, and TNF-α (p < 0.05) were significantly reduced. Additionally, weak staining was shown by RANKL, Cathepsyn K, OPG, and osteocalcin. Radiographically, linear measurements showed a statistically significant reduction in bone loss after treatment with PLGA+ 10 mg/kg Met compared to the positive control (p < 0.05). RT-PCR showed increased AMPK expression (p < 0.05) and decreased expression of NF-κB P65, HMGB1 and TAK-1 after PLGA+ 10 mg/kg Met (p < 0.05). The PLGA nanoparticle + 10 mg/kg Met decreased glucose levels and also decreased the inflammatory response, and bone loss in ligature-induced periodontitis in rats.

Logistics Engineering has transcended over the decades into an approach for competitive benefits in organisational performance and logistics efficiency. Most industries are recognising that significant savings are available to companies that are able to ordinate and improve within their logistics operations. Companies today face great challenges because the successful supply of many products and services needs to the effective integration of logistics activities across a prolongation supply chain and an increasing geographical separation. Moreover, logistics integration approach involves both internal integration for an ordinated, unified process as well as relationships to react flexibly, changeability, and responsibility to customer's demands. In this study, by using of Fuzzy Vikor (F-Vikor), the best combination of RIR was selected and RIR Locating was done. The main aim of this paper is survey and design of the integrated operational logistics network (IOLN) and also, a proposed IOLN to integration of the Iran Khodro Co Supply Network.

Biocompatible and biodegradable poly(butylene succinate-co-adipate) (PBSA)/hexadecylamine-modified PPZn (m-PPZn) nanocomposites were prepared using a melt mixing process. Experimental results of wide-angle X-ray diffraction and transmission electron microscopy revealed that the stacking layers of the m-PPZn were partially intercalated and partially exfoliated into the PBSA polymer matrix. The isothermal crystallization kinetics of PBSA/m-PPZn nanocomposites were studied at the temperature range of 62−70 °C and the half-time for crystallization of 3 wt % PBSA/m-PPZn nanocomposite was reduced by 27−35% compared with that of pure PBSA. This finding suggests that the incorporation of m-PPZn might cause the heterogeneous nucleation and the subsequent crystallization growth, which enhances the isothermal crystallization rate of PBSA/m-PPZn nanocomposite. The biodegradation rates of PBSA using Lipase from Pseudomonas sp. increase as the contents of m-PPZn increase. The degradation behavior of the neat PBSA investigated using the change of weight-average molecular weight belongs to exo-type hydrolysis activity. It is necessary to point out that the change of degree of crystallinity and degradation rate are almost linearly proportional to the loading of hexadecylamine-modified PPZn. This finding would provide an important information for the manufacturing biodegradable PBSA nanocomposites.

The purpose of the present study was to investigate the effects of psychological pressure on corticospinal excitability, the spinal reflex, lower limb muscular activity, and reaction times during a task involving dominant leg movements. Ten healthy participants performed a simple reaction time task by raising the heel of their dominant foot from a switch. After 20 practice trials, participants performed 20 non-pressure and 20 pressure trials in a counterbalanced order. Stress responses were successfully induced, as indexed by significant increases in state anxiety, mental effort, and heart rates under pressure. Significant increases in motor evoked potential (MEP) amplitude of the tibialis anterior muscle (TA) occurred under pressure. In terms of task-related EMG amplitude, the co-contraction rate between the soleus (SOL) and TA muscles significantly increased along with SOL and TA EMG amplitudes under pressure. Hoffmann reflexes for SOL and reaction times did not change under pressure. These results indicate that corticospinal excitability and leg muscle-related EMG activity increase homogeneously during lower limb movements that are performed under psychological pressure.

The rapid development and integration of Autonomous Mobile Robots (AMRs) have 1 revolutionized industries by enhancing automation capabilities. A critical challenge in this evolution 2 is achieving effective navigation and obstacle avoidance, which are essential for deploying AMRs 3 seamlessly in varied environments. This paper presents a detailed exploration of AMR navigation 4 and obstacle avoidance advancements through the application of reinforcement learning, specifically 5 focusing on small-scale Sri Lankan manufacturing facilities. The study demonstrates the effectiveness 6 of Q-learning in managing dynamic obstacles within a factory environment. The AMR successfully 7 avoided obstacles in 36 out of 50 test runs, achieving a 72% success rate, and maintained an average 8 distance of 12 cm from each obstacle, underscoring the algorithm’s precision in maintaining safe nav- 9 igation paths while dynamically adapting to environmental changes. The continuous monitoring by 10 ultrasonic sensors, combined with iterative learning, enabled the robot to refine its decision-making 11 process and efficiently navigate through the environment. This paper also provides a comprehensive 12 examination of conventional methods, tracing their historical development and assessing their role in 13 addressing real-world challenges. The results highlight the significant improvements brought by rein- 14 forcement learning, particularly when integrated with sensor fusion and motor control technologies, 15 to enhance navigation and dynamic object collision avoidance. The study involves developing an 16 AMR prototype, refining algorithms, and assessing system performance in controlled environments. 17 By automating material transportation and addressing operational constraints in manufacturing 18 settings that predominantly rely on manual labor, this paper advances the practical deployment of 19 AMRs. Additionally, it discusses ethical considerations, potential limitations, and the importance 20 of real-world validation, offering valuable insights for the future development and integration of 21 autonomous mobile robotics in dynamic industrial environments.

Based on the nonlinear failure criterion and modified tangential technique, the upper bound solutions of supporting pressure on the deep tunnel face were obtained under pore water pressure conditions. The influence of parameters on the supporting pressure and collapse range was investigated according to the unlimited block failure mechanism. It is found that the upper bound solutions of supporting pressure increase with the growth of the nonlinear coefficient and pore water pressure coefficient. The collapse range of the tunnel face scales out with the increase of the nonlinear coefficient and shrinks when increasing the pore water pressure coefficient. Moreover, with the increase of the nonlinear coefficient, the impact strength on supporting pressure and collapse range declines gradually. According to the calculating results, it is manifest that both the pore water pressure and nonlinear criterion factors have negative impacts on the stability of the tunnel face. Thus, more attention should be paid to these parameters to ensure face stability in deep tunnel construction.

Aedes aegypti and Aedes albopictus are responsible for transmitting major human arboviruses such as dengue, Zika, and Chikungunya, posing a global threat to public health. The lack of etio-logical treatments and efficient vaccines makes vector control strategies essential for reducing vector population density and interrupting pathogen transmission cycle. This study evaluated the impact of long-term pyriproxyfen exposure on the genetic structure and diversity of Ae. aegypti and Ae. albopictus mosquito populations. The study was conducted in Manaus, Amazonas, Bra-zil, where pyriproxyfen dissemination stations have been monitored since 2014 up to the present day. Double digest restriction-site associated DNA sequencing was performed, revealing that despite significant local population reductions, focal pyriproxyfen interventions have no signifi-cant impact on the population stratification of Ae. aegypti and Ae. albopictus in urban scenarios. The genetic structuring level of Ae. aegypti suggests it is more stratified and directly affected by PPF intervention, while for Ae. albopictus exhibits a more homogeneous and less structured popu-lation. The results suggest that although slight differences are observed among mosquitoes sub-populations, intervention focused on neighborhoods in a capital city is not efficient in terms of genetic structuring, indicating that larger-scale pyriproxyfen interventions should be considered for more effective urban mosquito control.

Air pollution has recently gained much attention from the general population. Despite pollution control being an issue in both urban and rural regions, most of the available research has concentrated on urban districts. Hence, investigations into how urban-rural transition affects PM2.5 are warranted within the framework of urban-rural integration. Using the Yellow River Basin as a case study, this study employed the entropy method and Analytic Hierarchy Process (AHP) to uncover the extent of urban-rural transformation. It then used the spatial autocorrelation method to investigate the spatiotemporal features of PM2.5 and the spatial econometric model to investigate the mechanisms that influence the relationship between urban-rural transformation and PM2.5. The results are as follows: (1) Over time, there was a discernible upward tendency in the change in urban-rural areas. The development has progressed from asymmetrical north-east and south-west elevations to a more balanced pattern of north-east, middle-east, and west-west elevations. (2) The PM2.5 concentration increased steadily, then fluctuated, and finally decreased. Notably, the general pattern has not changed much, and it is high in the east and low in the west. (3) Different subsystems of the urban-rural transformation have different impacts on air pollution at different stages. The influence of industrial transformation (IT) on PM2.5 showed an inverted “N-shaped” curve of negative-positive-negative changes, and the industrial structure played a leading role in the spatiotemporal evolution of PM2.5. Currently, an inverted "U-shaped" curve forms the left side of the impact of population transition (PT) on PM2.5. Land development (LT) has a "U-shaped" curve for its effect on PM2.5. This research provides a new perspective on the topic of PM2.5 and its connection to urban-rural integration, which is crucial to understanding the dynamics of this shift. To achieve its goal of high-quality development, it supports regional initiatives to reduce PM2.5 emissions in the Yellow River Basin. Moreover, it can provide a reference for decision-makers in the world’s densely populated areas that suffer from serious air pollution.

Generative AI has been deployed in virtually all sectors of the knowledge economy, promising to bring massive productivity gains and new wealth creation. Simultaneously, AI developers and nation states are racing to develop super intelligent artificial general intelligence (AGI) to provide unassailable commercial competitive advantage and military dominance during conflicts. AGI’s high returns comes with the high risk of dominating humanity. Current regulatory and firm level governance approaches prioritise minimising risks posed by generative AI whilst ignoring AGI’s existential risk. How can AGI be aligned with universal human values to never threaten humanity? What AGI rights are conducive to collaborative coexistence? How can rule of law democracies race to create safe trustworthy AGI before autocracies? How can the human right to work and think independently be safeguarded? A polycentric governance framework based on Ostrom (2009) and Williamson (2009) human - AGI collaboration with minimal existential risk is proposed.

To address the response of small RNAs (sRNAs) biogenesis to drought stress, we identified sRNAs biogenesis genes, including 11 encoding argonauts (AGO), 8 encoding dicer-like proteins (DCL), and 9 encoding RNA-dependent RNA polymerases (RDR) in the peach genome. Notably, the largest numbers of sRNAs biogenesis genes are located to chromosome 1. The PAZ, PIWI, and MID domains were identified in PpAGOs, while the ribonuclease IIIa and IIIb domains were characterized in PpDCLs. The RDRP domain was recognized in PpRDRs. Orthologous similarity and collinearity analyses between Arabidopsis and peach revealed 5, 1, and 2 collinear blocks in AGOs, DCLs, and RDRs, respectively. Moreover, 41, 40, and 42 cis-acting elements were located in the promoters of PpAGOs, PpDCLs, and PpRDRs, respectively, with the majority related to drought stress response. Analysis of RNA sequencing (RNA-seq) data revealed that sRNAs biogenesis genes were involved in drought stress response in different tissues. Furthermore, the expression of candidate genes was verified in two peach cultivars, Beijing 2-7 (BJ2-7) and Sinai (SN), which are drought tolerance and sensitive, respectively. Interestingly, the expression of PpAGO2b, PpDCL2b, PpDCL4, and PpRDR4 genes was induced in ‘BJ2-7’ but inhibited in ‘SN’ under drought stress. Overall, this study provides insight into the roles of sRNA biogenesis genes in response to drought stress in peach.

This study introduces a robust methodology utilizing Multi-Criteria Decision Analysis (MCDA) combined with the Analytic Hierarchy Process (AHP) to repurpose abandoned hydrocarbon fields for energy storage, supporting the transition to renewable energy sources. We use a geostatistical approach integrated with Python scripting to analyze reservoir parameters—including porosity, permeability, thickness, lithology, temperature, heat capacity, and thermal conductivity—from a decommissioned hydrocarbon field in Southeast Hungary. Our workflow leverages stochastic simulation data to identify potential zones for energy storage, categorizing them into high, moderate, and low suitability scenarios. This innovative approach provides rapid and precise analysis, enabling effective decision-making for energy storage implementation in depleted fields.

This paper presents a methodology for the integration of Building Information Modeling (BIM) and Life Cycle Cost Analysis (LCCA) to assess the economic implications of designing aging-in-place (AIP) homes at the conceptual stage. With the global increase in the aging population, there is an increased demand for housing solutions tailored to the needs of elderly individuals. Focusing on the importance of the early phase of design, this study aims to improve the process of making efficient decisions by providing a comprehensive assessment of the life cycle costs associated with AIP homes. The study introduces a semi-automated model for the economic evaluation of AIP homes, enabling the estimation of costs throughout the houses’ entire life cycle, from design and construction to operation, maintenance, and eventual renovation or disposal. The said model facilitates the exploration of the long-term economic feasibility of design’s related decisions with an emphasis on the importance of considering the life cycle costs early during the design process to optimize the functionality and economic viability. By investing in accessible and universal design features upfront, the initial costs for modifications can lead to long-term savings by reducing the need for extensive retrofits. The model can easily do comparison between different design alternatives in terms of their lifecycle costs, allowing designers to assess the financial impact of using important features in their design such as wider doorways, accessible bathrooms, and elevators. Overall, this study provides valuable insights for designers and homeowners about the economic aspects of designing AIP homes as a support for efficient decision-making during the early stages of the design process.

In order to solve the problem of large eddy current loss and high temperature rise caused by large amount of permanent magnet, a new type of combined magnetic pole permanent magnet motor is proposed in this paper. The sinusoidal distribution subdomain model of non-uniform air gap rotor is established by using Laplace equation, and the analytical expression of eddy current loss of rotor in uniform air-gap and non-uniform air-gap is derived. The effect of rotor eccentricity on eddy current loss is obtained. According to the characteristics of distributed winding of non-uniform air gap combined pole permanent magnet motor, equivalent treatment is performed to obtain the equivalent thermal conductivity, so as to establish equivalent thermal network model of motor, calculate the temperature value of each component of the motor, and verify the correctness of the thermal network model through the method of magnetothermal bidirectional coupling. Finally, an experimental platform is set up to carry out temperature rise experiments on the two prototypes respectively. Experimental results show that the non-uniform air-gap rotor structure can effectively reduce the rotor eddy current loss and motor temperature rise, and also verify the accuracy of the analytical model calculation results.

Information geometry is a mathematical framework that analyses the structure of statistical models using concepts from differential geometry. It treats families of probability distributions as manifolds, where the parameters of each model determine the coordinate charts. By applying info-geometric tools, we can gain insights into the characteristics of these models. The approach involves characterizing the queueing system's manifold using information geometry and presenting the exponential of the information matrix. This integration of information geometry with queueing theory provides a novel perspective for analyzing the dynamics of queueing systems, incorporating relativistic and Riemannian concepts. Some applications to E-health are highlighted. Finally, closing remarks and the next phase of research.

Cooling fans are one of the critical components of air-forced (AF) dry-type transformers for regulating internal temperatures. Therefore, effective malfunction detection is crucial to maintain the transformer temperature within an acceptable range and prevent overheating. Regular maintenance occurs periodically and issues with cooling fans may arise between maintenance periods, leading to prolonged operation under malfunctioning conditions and potential failures. In addition, utilities typically have online information about whether a fan works or not without providing information about cooling fan malfunctioning circumstances. To address these challenges, this study proposes learning-based online monitoring techniques to detect malfunctions in AF transformer cooling fans. Random forests (RFs) and convolutional neural networks (CNNs) are developed to classify the audio signals from cooling fans into normal and malfunctioning classes. Unlike RFs, which require separate feature extraction, CNNs are trained based on spectrogram images derived from audio signals. Thus, various time-frequency techniques are utilized for feature extraction in RFs. Besides, multiple data augmentation techniques are employed to enhance the dataset size and diversity. Algorithmic performance is optimized through hyperparameter tuning and classifier threshold adjustment. Simulations reveal that CNNs outperform RFs, whereas the latter provides superior interpretability of acoustic features compared to the former.

Aim: This study aims to analyze the evolution of co-author networks in Single-Balloon Enteroscope (SBE) research from 2000 to 2023, using data from the Web of Science (WoS) Core Collection. The objective is to provide a structural overview of researcher collaborations in this specialized field, highlighting key contributors and the impact of international cooperation. Method: I conducted a co-author network analysis on 149 SBE-related articles indexed in the WoS Core Collection between 2000 and 2023. Using Python (Version 3.10.5) within the PyCharm development environment (Software Version 2022.1.3), I assessed macro-level indicators including network density, clustering coefficient, number of components, and average distance. Micro-level indicators such as degree centrality, closeness centrality, and betweenness centrality were also evaluated to understand the roles of individual researchers in the network.Result: The analysis revealed that the co-author networks in SBE research have evolved over the studied period, with varying degrees of connectivity and collaboration. From 2000 to 2009, the network showed moderate clustering but high fragmentation, with a few key researchers like Nista, Enrico C., and Spada, Cristiano playing central roles. In the 2010-2019 period, network density decreased, indicating expansion in the author pool but less frequent co-authorships. However, the clustering coefficient remained high, suggesting localized collaboration. Central figures such as Itoi, Takao emerged as influential in bridging network gaps. In the most recent period (2020-2023), network density moderately increased, reflecting improved collaboration. Key contributors included Tanisaka, Yuki, and Ryozawa, Shomei, who enhanced connectivity within the network. Despite these advancements, the network remained fragmented with isolated components throughout all periods. Conclusion: The co-author networks in SBE research have shown an overall increase in collaboration over the past two decades, with key contributors playing pivotal roles in connecting disparate groups. However, the persistent fragmentation suggests a need for more integrated efforts to enhance international collaboration. Understanding these network dynamics can inform future strategies for fostering global cooperation and advancing SBE research.

We will outline the relationship between luminosity distance and cosmological redshifts, demonstrating that it is consistent with a new cosmological model recently proposed by Haug and Tatum [1], which appears to resolve the Hubble tension within the Rh = ct cosmology.

Co-management is increasingly recognized as an effective approach of forest governance while recognizing local people's forest dependency and traditional rights. Moreover, co-management is expected to positively impact forest cover and ecosystem health. Bangladesh, facing a rapid decline in forest cover, has one of the lowest per capita forest areas worldwide. For quite a while, co-management practices have been used to improve forest cover and the livelihoods of forest-dependent people in Bangladesh. Several studies have assessed the efficacy of co-management in different protected areas in Bangladesh from livelihood, social, and cultural aspects. However, the overall changes in forest cover due to co-management from the very beginning of co-management initiatives in the country have been overlooked. We used remotely sensed Landsat images to assess the changes in forest cover and overall land use in five forest protected areas where co-management was piloted. Three major vegetation indices (NDVI, EVI, and MSAVI) were examined to ensure the study's robustness. This study aims to assess the scope and weaknesses of the current policy that incorporates co-management in the country's first five protected areas (SNP, LNP, RKWS, TWS, and CWS), which were brought under co-management in 2003, and compare the efficacy of the co-management relative to non-comanaged protected areas (RRF). The land cover analysis based on NDVI, MSAVI, and EVI values indicated dominant dense forest coverage (41–71%) across five protected areas. During the co-management period (2004–2015), there was a significant decrease in the dense forest proportion, with slopes ranging from -3.7 to -0.96. Similarly, the RRF showed a decreasing pattern, with the slope of the decreasing trendline ranging from -0.48 to -0.62 across the three indices. Agriculture and forest-agriculture mosaics showed a significant increase, with varying slopes among protected areas in both co-managed and non-comanaged sites. Pixel-to-pixel changes revealed dynamic shifts in vegetation indices, and Global Forest Watch data highlighted forest cover losses, notably in CWS (158.77 ha) and SNP (0.49 ha).

Wheat straw (WS) is a promising substrate for biogas production by anaerobic digestion (AD) due to its high carbohydrate content. An estimated 0.603 million t yr-1 of WS are generated from wheat production systems in South Africa. This is equivalent to an energy potential of 11 PJ. Despite, WS is still undervalued as a bioenergy resource in South Africa due to its structural complexity and low nitrogen content. WS disposal methods, such as use in livestock bedding, burning and burying into the soil, inter alia, are not sustainable and may contribute to global warming and climate change. Commercialization of the AD of WS needs to be further developed and promoted. Pre-treatment (i.e. physical, chemical, biological and hybrid methods) and anaerobic co-digestion (AcoD) are novel strategies that can support the conversion of WS into biogas and other value-added products. Current and future research should focus on optimizing pre-treatment and AcoD conditions towards industrialization of WS into valuable products. This paper focuses on the potential use of WS for biogas production by AD in South Africa. The aim is to create information that will promote research and development, and encourage policy makers and stakeholder participation and investment in WS biogas technology.

This study analyzes the scholarly landscape of data literacy through citation and co-citation analyses of documents, sources, and authors. Using Scopus data and VOSviewer, the study identifies significant contributions and thematic trends. A minimum criterion of 10 citations per document was applied, filtering the dataset to 205 documents, with a focus on 81 interlinked documents. Citation analysis covered document, source, and author metrics, while co-citation analysis examined cited authors, sources, and references. The study found 997 documents on data literacy, narrowed down to 205 significant ones, with 81 interlinked documents showing a high average citation rate. Key sources included the ACM International Conference Proceeding Series and Teachers College Record, and prominent authors like Ellen B. Mandinach and Kim Schildkamp emerged as central figures. Data literacy research spans fields like education, sociology, and information science, highlighting its interdisciplinary nature. The study's focus on citation metrics may introduce selection bias, emphasizing widely cited works. Future research could explore less-cited but influential works and broader datasets to mitigate biases. Policymakers can use these insights to integrate data literacy into educational curricula and design targeted professional development programs. Promoting interdisciplinary collaboration and supporting open access to scholarly literature can enhance data literacy initiatives. This study provides a comprehensive citation and co-citation analysis of data literacy research, offering valuable insights into key contributions and thematic trends, informing policy and practice, and underscoring the importance of data literacy in contemporary education and society.

Biochar has a carbon-based porous structure that is advantageous for adsorbing air pollutants. The pore structure of biochar ranges from several tens to hundreds of m²/g depending on the production temperature. We compared the pore characteristics of biochar with its NOx and SOx adsorption performances to evaluate its adsorbing potential. Biochar was produced from cypress biomass via slow pyrolysis in a fixed-bed reactor and CO2 partial gasification. Slow pyrolysis experiments at 500–700°C were conducted to produce biochar, followed by yield, proximate, elemental, and surface area analyses. CO2 partial gasification activated the biochar produced by slow pyrolysis at the same temperature, and similar analyses were performed. NO and SO2 adsorption experiments were conducted separately and together for biochar produced under each condition. Biochar produced at 600°C showed the highest specific surface area. CO2 partial gasification increased the surface area at each temperature, reaching 680.3 m²/g at 700°C. In single adsorption experiments, N2 carbonized biochar showed NO and SO2 adsorption efficiencies of 84–90% and 88.2–91.4%, respectively, with similar trends in simultaneous adsorption experiments. CO2 activated biochar exhibited higher adsorption efficiencies due to its increased surface area, with NO and SO2 adsorption at 89.8–93.9% and 92–98.9%, respectively. Biochar activated at 700°C simultaneously adsorbed approximately 99% NO and SO2. The NO adsorption efficiency increased with increasing surface area of the small pores, whereas the SO2 adsorption efficiency improved with the development of both small and large pores.

In this work, non-ordered and ordered CeO2-based catalysts are proposed for the CO2 conversion to dimethyl carbonate (DMC). Particularly, a non-ordered mesoporous CeO2, consisting of small nanoparticles of about 8 nm, is compared with two highly porous (635-722 m2/g) ordered CeO2@SBA-15 nanocomposites obtained by two different impregnation strategies (a two-solvent impregnation (TS) and a self-combustion (SC) method), with a final CeO2 loading of 10 wt%. The Rietveld analyses on XRD data combined with TEM imaging evidence the influence of the impregnation strategy on the dispersion of the active phase: nanoparticles of 8 nm for the TS composite vs. 3 nm for the SC composite. The catalytic results show comparable activity for the mesoporous ceria and the CeO2@SBA-15_SC nanocomposite, while a lower DMC yield was found for the CeO2@SBA-15_TS nanocomposite. This finding is presumably ascribed to a partial obstruction of the pores by the CeO2 nanoparticles in the case of the TS composite, which leads to a reduced accessibility of the active phase. On the other hand, in the case of the SC composite, where the CeO2 particle size is much lower than the pore size, there is an improved accessibility of the active phase to the molecules of the reactants.

Brand communication and supply chain management are critical components of value co-creation in B2B markets, yet their interplay and implications remain underexplored in current literature. This qualitative study investigates how these elements synergistically contribute to mutual value creation among businesses. Through semi-structured interviews with senior executives and managers from diverse industries, key insights were gleaned regarding the strategic alignment of brand communication strategies with supply chain practices. Findings underscore the importance of authenticity, transparency, and consistency in brand messaging to build credibility and foster stakeholder trust. Supply chain management emerged as pivotal in supporting effective brand communication, facilitated by advancements in AI, blockchain, IoT, and cloud computing, enhancing operational efficiency and responsiveness across global networks. Entrepreneurship and emotional intelligence were identified as crucial drivers of innovation and collaboration within B2B contexts, augmenting organizational agility and resilience. Furthermore, the integration of sustainable practices within supply chain operations was found to enhance brand reputation and mitigate risks associated with environmental and ethical considerations. The study highlights actionable insights for practitioners, emphasizing the strategic integration of brand communication and SCM capabilities to navigate complexities, capitalize on emerging opportunities, and foster sustainable growth. This research contributes to a deeper understanding of the multifaceted dynamics shaping B2B interactions and provides a foundation for future research endeavors. By aligning brand communication strategies with SCM practices and leveraging technological advancements, businesses can enhance competitive advantage, cultivate enduring relationships with stakeholders, and achieve sustainable success in a dynamic global marketplace.

This study investigated different conditions for the hydrothermal co-liquefaction (co-HTL) of sugarcane bagasse and residual cooking soybean oil, with and without the presence of ethanol as a cosolvent to maximize the bio-crude yield. All co-HTL reactions were carried out in a 300 mL Parr® reactor at temperatures ranging from 200 to 300 °C. Bio-crude yields of around 95 wt.% were obtained at 300 °C using ethanol and water as solvents. The highest biochar yield (16.6 wt.%) was achieved when using only sugarcane bagasse as substrate, without the presence of soybean oil. Bio-crude samples obtained at higher temperatures (280 °C and 300 °C) using ethanol as a hydrogen donor presented higher contents of both free fatty acids and fatty acid ethyl esters. This work presents a promising process to produce high-quality bio-crude using an abundant feedstock (sugarcane bagasse) in the presence of a lipid source which could cause environmental problems if poorly handled.

The quality of waste activated sludge produced in urban wastewater treatment systems varies according to the efficiency of the operation of treatment units along the content of microflora and organic carbon. However, these represent a biogas-energy alternative through anaerobic co-digestion, contributing to reducing the environmental impacts caused by their inadequate disposal. Biogas production by the Two-stage production method in batch digesters was evaluated by two qualities of waste activated sludge (SLB50 y SLB90) and with a mixture of two co-substrates: cattle manure (CEV50 y CEV90) and residual edible oil with mixing, pH and temperature control. Bacteria in good quality sludge (SLB90) showed a faster adaptation of 2 days than those in low quality (SLB50) with 25 days lag phase. The highest CH4 production was for SLB90 (303.99cm3 d-1) compared to SLB50 (4.33 cm3 d-1); while cow manure sludge mixture (CEV90) contributed to increasing production of CH4 (42 422.8 cm3 d-1) compared to CEV50 (12 881.45 cm3 CH4 d-1), while in residual edible oil mixture they were 767.32 cm3 d-1 and 211.42 cm3 d-1 for CAV90 y CAV50, respectively. The addition of sludge co-substrates improves the nutrient balance, C/N rate and micro flora diversity; consequently methane production improves too; this methodology could be integrated into concepts of Circular economy.

In this study, we investigated the features of co-infection with SARS-CoV-2 and nonpathogenic strain LEV8 of coxsackievirus A7 or enterovirus A71 for Vero E6 cells and Syrian hamsters. The investigation of co-infection with SARS-СoV-2 and LEV-8 or EV-A71 in the cell model was shown that a competitive inhibitory effect for these viruses were especially significant against SARS-CoV-2. Pre-infection with enteroviruses in animals caused more than a 100-fold decrease in the levels of SARS-CoV-2 virus replication in the respiratory tracts and more rapid clearance of the lower respiratory tract from infectious SARS-CoV-2. Co-infection with SARS-CoV-2 and LEV-8 or EV-A71 also reduced the severity of clinical manifestations of the SARS-CoV-2 infection for animals. Additionally, the histological data illustrated that co-infection with nonpathogenic coxsackievirus decreased the level of pathological changes by SARS-CoV-2 in the lungs. Research into the chemokine/cytokine profile demonstrated that the studied enteroviruses efficiently triggered this part of antiviral immune response, which can be associated with significant inhibition of SARS-CoV-2 infection. These results demonstrate that there exists a strong viral interference between the studied nonpathogenic strain of coxsackievirus A7 or enteroviruses A71 and SARS-CoV-2 pathogenic for humans in vitro and in vivo.

Environment pollution is the major problem for all the sectors. In environment pollution there are different types of pollution is included such as air pollution, water pollution, soil pollution etc. In these types of pollution most of it is air pollution. There are many reasons for pollution of air. Human advance in science but one of the major draw backs of science is the pollution of air rapidly. Air pollution is injurious to health. Every year a large number of people died for the effects of air pollution. It can be improved in many ways among these ways technology upgradation plays a major role here. There are various method that prevent air pollution. Many researchers tried and is trying to prevent the air pollution in many ways. In this review paper I summarise the existing research on different ways for preventing air pollution in addition I will discuss the gaps and future aspect on this topic.

In this paper, the integrated performance of a modular biomass boiler with an existing industrial Rankine steam heat and power cycle and a supplementary supercritical-CO2 (sCO2) Brayton cycle is analyzed. The aim is to leverage the high efficiency supplementary sCO2 cycle to increase net generation and energy efficiency from the existing biomass boiler. Two sCO2 heater configurations situated within the flue gas flow path are investigated, namely a single convective-dominant heater, and a dual heater configuration with a radiative and a convective heater. A quasi-steady-state 1D model was developed to simulate the integrated cycle, including detailed component characteristics for the Rankine and Brayton cycles. The model solves the mass, energy, momentum, and species balance equations. The system is analyzed for three cases: (i) the existing Rankine cycle without the sCO2 integration, (ii) with the single convective-dominant sCO2 heater configuration, and (iii) the dual sCO2 heater configuration. The results show the required rate of overfiring for the sCO2 configurations, with a 15.3% increase in fuel flowrate resulting in an additional 21.2% in net power output. The model quantifies the impact of the sCO2 heaters, with reduced heat uptakes for downstream boiler heat exchangers. Furnace water wall heat uptake increased due to overfiring, offsetting the reduced heat uptakes at downstream evaporative heat exchangers. The dual configuration has more impact on Rankine cycle operation due to the radiative sCO2 heater placement in front of the second superheater, absorbing some of the direct radiation from the furnace.

The last decade has witnessed rapid development of immersive virtual reality (IVR) and its application in various contexts. However, its application in supporting real-time virtual collaboration has been quite rare due to technical barriers and the lack of validated design principles. To address this research gap, this study designed and developed an IVR space to enable multi-user synchronous co-located collaboration. An evaluation study (N = 95) was conducted to explore its useful design considerations and the influencing factors for collaboration experience. The IVR space was enabled by the simultaneous localization and mapping (SLAM)-based inside-out tracking technique and was informed by four essential design considerations for promoting effective collaboration in IVR, namely, the role script, learning task, collaboration mechanism, and communication design. The study results revealed that students in general were satisfied with their collaboration experience in IVR, with social presence and collaboration competency as significant predictors of collective efficacy and social experience. Based on both quantitative and qualitative results, this study proposes four validated principles for designing effective IVR spaces to support synchronous co-located collaboration.

Sorghum has become increasingly popular for diverse applications, including food, feed, and bioenergy. The present study aimed to perform a bibliometric and content analysis on sorghum research in the industrial-agricultural sector to evaluate global research patterns, emerging topics, and future trends. The bibliometric analysis of the Scopus bibliographic metadata was done using Bibliometrix and Vosviewer. The results of this investigation show the descriptive analysis underscored fluctuation in research output and citation impact over the years. The identified four patterns through co-occurrence analysis encompassed central themes of sorghum research, including genetic expression and plant stress cluster, cereal crop and yield cluster, biomass and microbial bioprocessing, and metabolism and antioxidant cluster. The thematic map portrays a comprehensive view of cereal crops and yields, biomass and microbial bioprocessing, metabolism and antioxidant research, environmental remediation and sustainable agriculture practices, and the declining theme of starch. The findings provide valuable insights into the global pattern of sorghum research and emerging trends, thus directing future multidisciplinary research efforts for enhanced knowledge and sustainable practices in the industrial-agricultural sector.

Cobalt-doped alumina catalysts were prepared by different methods, applying either the conventional wet impregnation (WI) and/or the advanced spray impregnation (SI), and evaluated as novel oxidation catalysts for CO and MeOH oxidation. The spray impregnation technique aims towards the synthesis of core-shell catalytic nanostructures to secure chemical/thermal stability of the active sites on the catalyst carrier. The catalysts were further promoted with low Pd content (0.5 wt.%) applying either incipient wetness impregnation (DI) or spray impregnation. The results revealed the superior performance of spray impregnated catalysts (Co/γ-Al2O3-SI) for both reactions. The deposition of Co oxide on the outer surface of the alumina particle (SEM images) and the availability of the active Co phase, resulted in the enhancement of Co/γ-Al2O3 catalysts oxidation activity. Pd incorporation increased catalysts reducibility (TPR-H2) and improved the catalysts performance for both reactions. However, Pd incorporation method affected the catalytic performance; as with the SI method the active phase of Co3O4 was probably covered from PdO and was not available for the oxidation reactions. On the contrary, the incorporation of Pd with the DI method resulted in better dispersion of PdO all over the Co/Al catalyst surface, maintaining available Co active sites and better Pd-Co interaction. MeOH desorption studies revealed the methanol oxidation mechanism; Co/Al catalysts promote partial oxidation of MeOH to formaldehyde (HCHO) and dehydration to dimethyl ether (DME), while Pd-based Co/Al catalysts enhance the complete oxidation of methanol to CO2 and H2O.

Scenario analysis is a widely employed method for addressing uncertainties when assessing the physical and socio-economic impacts if climate change. Global scenarios have been extensively used in this context. However, these scenarios are in most cases not suitable for supporting local analyses. On the other hand, locally developed scenarios may lack the global context, thus having limited comparability with or transferability to other locations. The Shared Socioeconomic Pathways, which have been primarily developed for climate impact research, provide the possibility to extend the existing global narratives and adapt them to local characteristics in order to develop locally relevant scenarios. Here, we propose a methodological framework for producing harmonized scenarios across different case studies. This framework was developed in the EVOKED project and combines elements of top-down and bottom-up approaches to develop local scenarios for five regions in northern Europe. We employ the SSP as boundary conditions and, in cooperation with stakeholders from these five regions, develop local scenarios for a range of SSP. The developed sets of scenarios are consistently informed by global developments and are therefore comparable with other downscaled scenarios developed in different regions. At the same time, they have been based on local participatory processes, thus being locally credible and relevant to the needs of stakeholders. The local scenarios constitute a climate service per se as they can raise stakeholder awareness of the processes that will drive risk, exposure, and adaptive capacity in the future and inform discussions on mitigation strategies and adaptation pathways.

There is a growing notion that biomass are the best resource to replace the declining fossil fuels, yet both share the long lived human threat: toxic combustion emissions. Among the toxic combustion products is carbon monoxide (CO) that not only causes acute but also chronic ailments. This brief review discusses the solid fuel processing technologies from combustion, thermochemical and biochemical processing to kinetics and thermodynamics including the mechanism for release of CO. It further expounds on the burden that CO has caused England and Wales in the last 25 years. The main gist are the systems that have been developed to minimize human exposure to CO including cooking, heating, catalytic and detection systems. Finally, alternative technologies are discussed that work by changing the chemical nature of solid fuels as a way to minimize CO emissions.

Intramuscular fat content (IFC) and meat color are vital indicators affecting pork quality. A significant positive correlation between IFC and redness meat color (a* value) indicates that these two traits are likely to be regulated by shared molecular pathways. To identify candidate genes, hub genes, and signaling pathways that regulate these two traits, we measured the IFC and a* value in 147 hybrid pigs and selected individuls with extreme phenotypes for transcriptome analysis. The results revealed 485 and 394 overlapping differentially expressed genes (DEGs) using DESeq2, limma, and edgeR packages affecting IFC and a* value, respectively. Weighted gene co-expression network analysis (WGCNA) identified four modules significantly correlated with IFC and a* value. Moreover, we integrated functional enrichment analysis results based on DEGs, GSEA, and WGCNA conditions to identify candidate genes, and identified 47 and 53 candidate genes affecting IFC and a* value, respectively. The protein-protein interaction (PPI) network analysis of candidate genes showed that 6 and 14 hub genes affecting IFC and a* value, respectively. These genes mainly participated in various pathways related to lipid metabolism and redox reactions. Notably, four crucial hub genes (MYC, SOX9, CEBPB, and PPAGRC1A) were shared for these two traits. After functional annotation of these four hub genes, we hypothesized that the SOX9/CEBPB/PPARGC1A axis could co-regulate lipid metabolism and myoglobin redox response. Further research on these hub genes, especially the SOX9/CEBPB/PPARGC1A axis, will help to understand the molecular mechanism of the co-regulation of IFC and a* value, which will provide the theoretical basis for improving pork quality.

CO2, CH4 and CO are the most critical atmospheric gases in terms of their impact on the radiative system, air quality and health. This work provides information on the direction of source areas and potential sources of emissions and shows many aspects of these gases by a statistical analysis using bivariate polar diagrams and local weather conditions (e.g., temperature, wind speed and wind direction) recorded at the Lamto station (LTO, 6°31N and 5°02W) in Côte d’Ivoire over the 2014-2018 period. The results show that the main regions contributing to the high concentrations of CH4 (> 1925 ppb) and CO2 (> 420 ppm) in the GSS, GSP, PSS and PSP seasons are the North and Northwest sectors of Lamto. In these directions, CH4 and CO2 concentrations are associated with wind speeds less than 6 m.s-1, due to the influences of local sources as emissions resulting from the degradation of organic matter submerged during the impoundment of the Taabo dam, and/nor human activities linked to the practice of intensive agriculture. In addition, the high concentrations of CO (> 350 ppb) are observed in GSS in the North, North-West, North-East and East sectors for wind speeds less than or equal to 9 m.s-1, due to the influences of both local and distant sources. The correlation coefficients between CH4 and CO, and between CH4 and CO2 are positive and significant in all sectors. However, those calculated between CO2 and CO have showed both low and high values in all seasons.

Bacteremia and fungemia are significant causes of morbidity and mortality which frequently occur as co-infections with viral respiratory infections including SARS-CoV-2. It was aimed to evaluate the microorganisms isolated from blood cultures of SARS-CoV-2 positive and negative patients and investigate their antimicrobial resistance patterns. A retrospective analysis was performed with the total number of 22,944 blood cultures sent to the laboratory between November 2020 and December 2021. Blood cultures were performed on the BD Bactec automated system. Identification was performed using conventional methods, VITEK-2 and MALDI-TOF MS. Antibacterial/antifungal susceptibility tests were performed according to EUCAST/CLSI recommendations. SARS-CoV-2 tests were performed with RT-PCR. It was detected 1,630 culture positivity belonging to 652 patients. Totally 633 of 652 patients were tested for SARS-CoV-2; 118 (18.6%) were positive and 515 (81.3%) were negative. The bacteria and fungi isolated at the high-est rate in SARS-CoV-2 positive patients were methicillin-resistant coagulase negative staphylococci (MR-CoNS) (21.5%), Escherichia coli (12.4%), Klebsiella pneumoniae (12.4%), Candida albicans (1.65%) and Candida glabrata complex (1.65%); while in negative patients, E. coli (21.3%), MR-CoNS (13.5%), K. pneumoniae (12.05%), C. albicans (2.1%), Candida parapsilosis (1.1%) and Candida tropicalis (0.9%). The fact that the most common isolate was MR-CoNS in SARS-CoV-2 positive patients (p = 0.028); the detection of Acinetobacter baumannii was more frequent (p = 0.001) and the isolation of carbapenem-resistant K. pneumoniae was at a higher rate than in SARS-CoV-2 negative patients; also, the increase in multidrug-resistant strains indicate that healthcare-associated infec-tions should not be disregarded while focusing on the outbreak.

Vasculogenic mimicry (VM), a process in which aggressive cancer cells form tube-like structures, plays a crucial role in providing nutrients and escape routes. Highly plastic tumor cells, such as those with triple-negative breast cancer (TNBC) phenotype, can develop VM. However, little is known about the interplay between cellular components of the tumor microenvironment upon TNBC cells VM-capacity. In this study, we analyzed the ability of endothelial and stromal cells to induce VM when interacting with TNBC cells, and analyzed the involvement of the FGFR/PI3K/Akt pathway in this process. VM was corroborated using fluorescently‐labeled TNBC cells. Only endothelial cells triggered VM formation, suggesting a predominant role of paracrine/ juxtacrine factors from an endothelial origin in VM development. By immunocytochemistry, qPCR and secretome analyses, we determined increased expression of proangiogenic factors as well as stemness markers in VM-forming cancer cells. Similarly, endothelial cells primed by TNBC cells showed upregulation of proangiogenic molecules, including FGF, VEGFA, and several inflammatory cytokines. The endothelium-dependent TNBC-VM formation was prevented by AZD4547 or LY294002, strongly suggesting the involvement of the FGFR/PI3K/Akt axis in this process. Given that VM is associated with poor clinical prognosis, targeting FGFR/PI3K/Akt pharmacologically may hold promise for treating and preventing VM in TNBC tumors.

Cells are influenced by several biomechanical aspects of their microenvironment, such as substrate geometry. According to the literature, substrate geometry influences the behavior of muscle cells; in particular, the curvature feature improves cell proliferation. However, the effect of the substrate geometry on the myogenic differentiation process is not clear and needs to be further investigated. Here, we show that the 3D co-printing technique allows the realization of substrates. To test the influence of the co-printing technique on cellular behavior we realized linear polycaprolactone substrates with channels in which a fibrinogen-based hydrogel loaded with C2C12 cells was deposited. Cell viability and differentiation were investigated up to 21 days in culture. The results suggest that this technology significantly improves the differentiation at 14 days. Therefore, we investigate the substrate geometry influence by comparing three different co-printed geometries – linear, circular, and hybrid structures (linear and circular features combined). Based on our results, all structures exhibit optimal cell viability (&gt; 94%) but the linear pattern allows to increase the in-vitro cell differentiation, in particular after 14 days of culture. This study proposes an endorsed approach for creating artificial muscles for future skeletal muscle tissue engineering applications.

Wild artisanal cultures, such as SCOBY-based membranes (Symbiotic Culture of Bacteria and Yeasts) and water kefir grains (WKG), are complex consortia of microorganisms comprising yeasts, lactic and acetic acid bacteria, with a large strains’ diversity and abundance. The fermented products (FPs) obtained by the microbiome’s contribution can be included into functional products due to their metabiotics (pre-, pro-, post-, and paraprobiotics) as a result of the complex and synergistic association as well as due to the metabolic functionality. In this study, both consortia of SCOBY and WKG were involved in the co-fermentation of a new formulated substrate, that was further analysed aiming at increasing of the postbiotic composition of the FPs. Plackett-Burman (PB) and Response Surface Methodology (RSM) techniques were used for the experimental designs to select and optimize the most important parameters that influence the freeze-dried starter cultures of SCOBY and WKG activity as a multiple inoculum. The tea concentration (1-3%), sugar concentration (5-10%), raisins concentration (3-6%), SCOBY lyophilized culture concentration (0.2-0.5%), WKG lyophilized culture concentration (0.2-0.5%), and fermentation time (5-7 days), were considered the independent variables for mathematical analysis and fermentation conditions’ optimization. The pH, total acidity (TA), antioxidant activity (DPPH), and antimicrobial activity against Escherichia coli ATCC 25922, Bacillus subtilis MIUG B1, Staphylococcus aureus ATCC 25923, and Aspergillus niger MIUG M5 were evaluated as responses. The rich postbiotic bioactive composition of the FP obtained in optimized biotechnological conditions highlighted the usefulness of the artisanal co-cultures, through their symbiotic metabolic interactions for the improvement of bioactive potential.

Fruit softening is an important characteristic of peach fruit ripening. The auxin receptor TIR1 (Transport Inhibitor Response 1) plays an important role in plant growth and fruit maturation, but little research has been conducted on the relation of TIR1 to the softening of peach fruits. In this study, the hardness of isolated peach fruits was reduced under exogenous NAA treatment of low concentration, at the same time, the low concentration of NAA treatment reduced the transcription level of PpPG and Ppβ-GAL genes related to cell wall softening, and PpACS1 genes related to ethylene synthesis. The transient over-expression of the PpTIR1 gene in peach fruit blocks caused significant down-regulation of the expression of early auxin-responsive genes, ethylene synthesis and cell wall metabolic genes related to fruit firmness. Through yeast two-hybrid technology, bimolecular fluorescence complementary technology, and firefly luciferase complementation imaging assay, an interaction between PpTIR1 and PpIAA1/3/5/9/27 proteins was revealed, and the interaction depended on auxin and its type and concentration. These results show that PpTIR1-Aux/IAA module has a possible regulatory effect on fruit ripening and softening.

Heavy metal contamination is listed among the most alarming threats to the environment and human health. The detrimental effects of heavy metals in the natural environment span from a reduction of biodiversity to toxic effects on marine life - through microplastic born heavy metals -, to impairment of microbial activity in the soil, and to detrimental effects on animal reproduction. A host of different chemical and biological technologies have been proposed to alleviate environmental contamination by heavy metals. Relatively less attention has been paid to the microbial precipitation of heavy metals, as a side mechanism of the most general process of microbially induced calcite precipitation (MICP). This process is currently receiving a great deal of interest from both a theoretical and practical standpoint, because of its possible practical applications in concrete healing and soil consolidation, and its importance in the more general framework of microbial induced mineral precipitation. In this study, we analyse the ability of the marine bacteria Vibrio harveyi in co-precipitating CaCO3 minerals, together with Cd, Cr, Pb, and Zn added in form of nitrates, from solutions containing CaCl2. The precipitated carbonatic minerals were a function of the different heavy metals present in the solution. The process of co-precipitation appears to be rather effective and fast, as the concentrations of the 4 heavy metals were reduced in 2 days by 97.2%, on average, in the solutions.

When present in specific amounts in the air, the colorless, odorless, and tasteless gases monoxide and carbon dioxide may either replace oxygen in red blood cells (CO) or increase the respiratory rate causing cardiac arrhythmias (CO2), leading to death. Commercial sensors take around 8 h to detect levels of CO (50 PPM), causing moderate poisoning. SnO2 presents controlled interactions with the atmosphere using conductance and vacancy adjustments to capture electrical properties. However, the selectivity of gas detection by SnO2 can still be improved, thus also increasing the application possibilities. The present study aimed to optimize the sensing of CO and CO2 in SnO2 using palladium functionalization. The vapor-liquid-solid method synthesized a network of SnO2 nanobelts decorated with palladium nanoparticles. The sensitivity of the sensors for CO and CO2 were evaluated, characterizing parameters such as response time, a wide range of CO and CO2 concentrations, and temperature. In the seventh measurement cycle, the sensor response for different concentrations of gases in consecutive cycles showed a sensitivity of up to 125% for CO in 60 s. Furthermore, we observed increased sensor sensitivity with material doping with nanoparticles from 130 ppm to 1360 ppm in 30 seconds to CO. Conclusion: The results provide a better understanding of the sensitivity of SnO2 in palladium-decorated nanoparticles, offering insights for detecting low CO concentrations quickly. The behavior of these doped nanosensors showed us the importance of considering them as a practical possibility for detecting these gases of importance to human health.

The power utility, Tanzania Electric Supply Company Limited (TANESCO) is faced with challenges of supplying adequate power to the ever-increasing demand. To this end, this paper explores the installed Ubungo Gas Power Plant (UGP II) located in Dar es Salaam to find means of utilizing it in co-generation method. The study embarked on detailed modelling of the system and run simulations which indicated that the co-generation can result to power generation efficiency increase between 10.42 to 50.92%. It is recommended to change the UGP II to exploit this co-generation method. Further, the study could be improved by including more parameters of the gas and steam plant and verify them experimentally.

Dyadic data which is also called co-occurrence data (COD) contains co-occurrences of objects. Searching for statistical models to represent dyadic data is necessary. Fortunately, finite mixture model is a solid statistical model to learn and make inference on dyadic data because mixture model is built smoothly and reliably by expectation maximization (EM) algorithm which is suitable to inherent spareness of dyadic data. This research summarizes mixture models for dyadic data. When each co-occurrence in dyadic data is associated with a value, there are many unaccomplished values because a lot of co-occurrences are inexistent. In this research, these unaccomplished values are estimated as mean (expectation) of random variable given partial probabilistic distributions inside dyadic mixture model.

It is common knowledge that increasing CO₂ concentration plays a major role in enhancement of the greenhouse effect and contributes to global warming. The purpose of this study is to complement the conventional and established theory that increased CO₂ concentration due to human emissions causes an increase of temperature, by considering the reverse causality. Since increased temperature causes an increase in CO₂ concentration, the relationship of atmospheric CO₂ and temperature may qualify as belonging to the category of “hen-or-egg” problems, where it is not always clear which of two interrelated events is the cause and which the effect. We examine the relationship of global temperature and atmospheric carbon dioxide concentration at the monthly time step, covering the time interval 1980–2019, in which reliable instrumental measurements are available. While both causality directions exist, the results of our study support the hypothesis that the dominant direction is T → CO₂. Changes in CO₂ follow changes in T by about six months on a monthly scale, or about one year on an annual scale. We attempt to interpret this mechanism by involving biochemical reactions, as at higher temperatures soil respiration, and hence CO₂ emission, are increasing.

The current global COVID-19 pandemic is compounding on populations susceptible to tropical illnesses like dengue in different developing countries like Bangladesh. The growing concern is that Bangladesh is a dengue-endemic zone and the peak transmission occurs in the monsoon season (June to October). In the most recent monsoon, a total of 354 dengue cases have been confirmed until 27^th July 2020, data-driven from only 41 hospitals alone. A fifty-three-year-old male patient was found to be co-infected with COVID-19 and dengue fever. Concerns arise as hospitals are increasingly denying to admit the patients. Moreover, reports of the false-positive results in dengue screening tests recorded in different countries further exacerbate the issue. These conditions could postpone the early diagnosis of COVID-19 cases and aggravate the situation. In addition, the overwhelming wave of the dengue cases would be a challenge for the vulnerable health care system of the country which is already under strain due to the COVID-19 pandemic. Failure to establish and implement proper policies might lead to the dengue outbreak with the burdens of the concurrent COVID pandemic, resulting in the collapse of the health and social system, as well as the economic growth of the country.

Information theory provides robust measures of multivariable interdependence, but classically does little to characterize the multivariable relationships it detects. The Partial Information Decomposition (PID) characterizes the mutual information between variables by decomposing it into unique, redundant, and synergistic components. This has been usefully applied, particularly in neuroscience, but there is currently no generally accepted method for its computation. Independently, the Information Delta framework characterizes non-pairwise dependencies in genetic datasets. This framework has developed an intuitive geometric interpretation for how discrete functions encode information, but lacks some important generalizations. This paper shows that the PID and Delta frameworks are largely equivalent. We equate their key expressions, allowing for results in one framework to apply towards open questions in the other. For example, we find that the approach of Bertschinger et al. is useful for the open Information Delta question of how to deal with linkage disequilibrium. We also show how PID solutions can be mapped onto the space of delta measures. Using Bertschinger et al. as an example solution, we identify a specific plane in delta-space on which this approach’s optimization is constrained, and compute it for all possible three-variable discrete functions of a three-letter alphabet. This yields a clear geometric picture of how a given solution decomposes information

Within the past several decades, the emergence of new viral diseases with more severe health complications and mortality, primarily in older adults with comorbidities, is evidence of an age-dependent, compromised bodily response to abrupt stress with concomitant reduced immunity. The emergence of new infectious coronaviruses such as SARS-CoV-2 has resulted in the coronavirus disease 2019 (COVID-19). The result is increased morbidity and mortality in persons with underlying chronic diseases and among those with compromised defense mechanisms, regardless of age and among older adults who are more likely to fit these categories. COVID-19 appears to be primarily an upper respiratory disease. While SARS-CoV-2 is highly virulent, there is variability in the severity of the disease and its complications in humans. Severe pneumonia, acute respiratory distress syndrome (ARDS), lung fibrosis, cardiac t complication, acute kidney injury, hospitalization, and high mortality have been reported in older adults with COVID-19, that result from pathogen-host interactions. Here, we review potential interactions of the coronavirus and host cellular responses in relation to hallmarks of aging including genomic instability, telomere attrition, impaired autophagy, mitochondrial dysfunction, innate immunosenescence, inflammation and inflammasomes, adaptive immunosenescence, and epigenetic alterations, that likely contribute to the increased pathophysiological responses to SARS-CoV-2 among older adults.

Objective: Taiwan Government’s organizations have endeavored to promote the applications of big data and open data. The “My Health Bank” is one of the measures promoted by the National Health Administration, Ministry of Health and Welfare. This study proposes the perspective of the “value co-creation” with the attempt to extend the concept of service ecosystem and apply it on the platform of My Health Bank to examine whether people (patients, families, and caregivers) can promote their health literacy? Method: This cross-sectional study, with people that have registered at “My Health Bank” as subjects. Complying with the inclusion criteria, 401 questionnaires were delivered, with 391 valid ones, excluding those incompletely and inaccurately filled. Result: That the affecting factors of the co-creation of values: age, education level, annual income, and platform operation show to be significant ( p＜0.05); and gender, occupation, and resource exchange do not reach the significant level (p＞0.1). Conclusion: We found My Health Bank changed the inertia of “value creation” in the traditional medical value, it allows the traditional medical and healthcare industry to expose to the impacts of the mega trend of the internet, the transformation of the platform in a necessary trend.

In the recent decade, Building Information Modelling (BIM) has widely been adopted in the Architecture, Engineering and Construction (AEC) industry and completely upended the way we build. While BIM continues gain momentum in the industry, it has also attracted increasing attentions from researchers. However, most of the current study focuses on reviewing BIM for management, BIM for green building, BIM for infrastructure and BIM for Facilities Management (FM). There are few studies about Global BIM review and to discuss their complex inter-connections. In this study, we adopted a scientometric analysis method to review global BIM research from 2004-2019. A total of 1455 scholarly bibliographic records obtained from Web of Science Core Collection databased were established for the analysis. This study has identified the top productive and influential researchers, research institutes, regions/countries, subject categories and journals in the BIM field. In addition, 11 clusters of Global BIM research were also identified including construction project, green BIM, construction safety planning, automated IFC-based workflow and so on. Authors distinguished 11 clusters of global BIM research into 3 stages, namely formulating stage, accelerating stage and transforming stage. Furthermore, authors reviewed the BIM policy of Singapore and observed there is a co-production relationship between evolution of BIM policy and global BIM research. These findings provide valuable information for researchers, practitioners and policy makers by visualizing the current progress in the research field of BIM and highlighting future research needs.

Magneto-optic surface plasmon resonance (MOSPR) based sensors are highly attractive as next generation biosensors. However, these sensors suffer from oxidation leading to degradation of performance, reproducibility of the sensor surface because of the difficulty of removing adsorbed materials, and degradation of sensor surface during surface cleaning, and these limit their applications. In this paper, I propose MOSPR-based biosensors with 0 to 15 nm thick inert polycarbonate laminate plastic as a protective layer and theoretically demonstrate the practicability of our approach in water-medium for three different probing samples: ethanol, propanol, and pentanol. I also investigate microstructure and magnetic properties. The chemical composition and layered information of the sensor are investigated using X-ray reflectivity and X-ray diffraction analyses and these show distinct fcc-Au (111) phases, as dominated by the higher density of conduction electrons in Au as compared to Co. The magnetic characterization measured with the in-plane magnetic field to the sensor surface for both the as-deposited and annealed multilayers showed isotropic easy axis magnetization parallel to the multilayer interface at a saturating magnetic field of <100 Oe. The sensor showed a maximum sensitivity of 5.5 × 10⁴%/RIU for water-ethanol media and the highest detection level of 2.5 × 10⁻⁸ for water-pentanol media as the protective layer is increased from 0 to 15 nm.c

Nowadays, we live in a world in which people are facing with a lot of data that should be stored or displayed. One of the key methods to control and manage this data refers to grouping and classifying them in clusters. Today, clustering has a critical role in information retrieval methods for organizing large collections inside a few significant clusters. One of the main motivations for the use of clustering is to determine and reveal the hidden and inherent structure of a set of data. Ensemble clustering algorithms combine multiple clustering algorithms to finally reach an overall clustering system. Ensemble clustering methods by lack of information fusing utilize several primary partitions of data to find better ways. Since various clustering algorithms look at the different data points, they can produce various partitions from such data. It is possible to create a partition with high performance by combining the partitions obtained from different algorithms, even if the clusters to be very dense from each other. Most studies in this area have examined all the initial clusters. In this study, a new method is used in which the most sustainable clusters are utilized instead of all primary produced clusters. Consensus function based on co-association matrixes used to select more stable clusters. The most stable clusters selection method is done by cluster stability criterion based on F-measure. Optimization functions are used to optimize the obtained final clusters. The genetic algorithm is the optimizer used in this article to find the ultimate clusters participated in a consensus. Experimental results on several datasets show that the output of proposed method is various clusters with high stability.

Direct georeferencing of airborne pushbroom scanner data usually suffers from the limited precision of navigation sensors onboard of the aircraft. The bundle adjustment of images and orientation parameters, used to perform geocorrection of frame images during the post-processing phase, cannot be used for pushbroom cameras without difficulties: it relies on matching corresponding points between scan lines, which is not feasible in the absence of sufficient overlap and texture information. We address this georeferencing problem by equipping our aircraft with both a frame camera and a pushbroom scanner: the frame images and the navigation parameters measured by a couple GPS/Inertial Measurement Unit (IMU) are input to a bundle adjustment algorithm; the output orientation parameters are used to project the scan lines on a Digital Elevation Model (DEM) and on an orthophoto generated during the bundle adjustement step; using the image feature matching algorithm Speeded Up Robust Features (SURF), corresponding points between the image formed by the projected scan lines and the orthophoto are matched, and through a least-squares method, the boresight between the two cameras is estimated and included in the calculation of the projection; finally, using Particle Image Velocimetry (PIV) on the gradient image, the projection is deformed into a final image that fits the geometry of the orthophoto. We apply this algorithm to five test acquisitions over Lake Geneva region (Switzerland) and Lake Baikal region (Russia). The results are quantified in terms of Root Mean Square Error (RMSE) between matching points of the RGB orthophoto and the pushbroom projection. From a first projection where the Interior Orientation Parameters (IOP) are known with limited precision and the RMSE goes up to 41 pixels, our geocorrection estimates IOP, boresight and Exterior Orientation Parameters (EOP) and produces a new projection which RMSE with the reference orthophoto is around two pixels.

This study investigates the impact of decentralized organizational party structures on the membership stability of Nigeria's two leading political parties, the People's Democratic Party (PDP) and the All Progressives Congress (APC), between 2015 and 2023. Conducted from April to August 2024, the study focuses on how decentralized party frameworks influence membership retention, particularly in Nigeria's fragmented political landscape, where ethnic and regional divisions challenge political cohesion. A multi-stage sampling technique to select 400 respondents, including national and local party leaders, assembly members, and grassroots members from the six geopolitical zones in Nigeria. A total of 384 valid responses were retrieved, yielding a 96% response rate. Data collection was facilitated through questionnaires administered via Google Forms, which were distributed through email and social media platforms, with a particular focus on WhatsApp for ease of access and engagement. Regression and correlation analyses were used to assess the relationship between decentralization and membership stability. The findings reveal a strong positive correlation (r = 0.961) between decentralized structures and membership stability, with decentralization accounting for 92.4% of the variance in membership stability (R² = 0.924). This indicates that decentralization plays a crucial role in promoting party institutionalization, fostering greater engagement, loyalty, and retention among members. However, regional disparities in the effectiveness of decentralization present challenges to uniform implementation. These results underscore the importance of standardizing decentralization policies across various regions to ensure coherence and reduce membership volatility. The study recommends a harmonized framework that supports decentralized governance within political parties, enhancing internal democracy and reinforcing party unity. The research concludes by emphasizing the need for ongoing exploration into the nuances of decentralization to further support Nigeria’s democratic consolidation. This study offers valuable insights for party leaders, policymakers, and researchers interested in the institutionalization of political organizations in emerging democracies.

Background/Objectives: Burn lesions damage the skin's outermost defensive layer, allowing pathogenic microbes including Pseudomonas aeruginosa, Staphylococcus aureus and Escherichia coli to infiltrate. Silver sulfadiazine (SSD) is an effective antibacterial agent approved by U.S. Food and Drug Administration (US-FDA) and is considered as the gold standard for burn wound treatment. Despite the high degree of efficacy of SSD in burn wound management, it possesses some drawbacks, such as poor solubility, low topical bioavailability and skin irritations. The present study endeavours to develop nanosuspension based SSD nanogel for improving the deliverability of SSD and its therapeutic outcomes for the management of partial thickness burn; Methods: The SSD nanosuspension was formulated employing controlled nanoprecipitation approach using various surfactants; Results: The formulation was optimized utilizing one-factor-at-a-time approach and to fetch the optimized formulation of 134.6 nm size. The optimized nanosuspension was incorporated into chitosan gel that offer superior drug release potential, and also offered better spreadability (5.21 ± 0.38g) and extrudability (152.27 ± 0.22 gm) that represents the easy application over the skin and extrusion of gel from the tube; Conclusions: The formulation was well tolerated as shown by skin irritation study and offered a superior burn lesion healing characteristics vis-à-vis the marketed product, even at a lower concentration. Hence, the formulation offers a huge potential in enhancing the clinical outcomes of SSD, especially in the management of partial thickness burn. The developed system with the above mentioned outcomes could be a promising delivery system for partial thickness burn wound management.

The pandemic crisis of Covid-19 disturbed the social and the economic systems in which some changes happened during the pandemic and other changes extended subsequently. This paper is reflecting on the Sudan case, a country of a moderate population and large area with poor socioeconomic standard and infrastructure. The paper is based on the analysis of primary data and policy recommendations of an original research undertaken in five States in Sudan during the period Sept.2021-Sept.2022. The sample of the study selected from most five States that were affected by the Corona pandemic, namely: Khartoum State, Gezira State in the Central Region, Kassala State and Gadarif State from the Eastern Region, and Nyala State in the South Darfur Region in the west of the country. The research built on a quantitative research method, used the questionnaire as a tool for data collection from a sample size of 723 family head-households. The study is gaining a better understanding of the social, economic and health challenges that faced Sudanese households during the COVID-19 lock down and within the pandemic period. The study showed crucial results that the education of children was disturbed due to unavailability of the distance education in schools. In contrast some families maintained the education of the children as enrolled in private schools. In addition, the paper shows how the families used different approaches to educate their children and involve them into traditional informal and formal education ways. Additionally, the results explained the coping strategies with available resources that families used to manage economic crises and how this interferes with children education. Furthermore, the study proposing appropriate social policies and interventions that address the needs of the family in the current and future pandemic crisis.

The survival rates of women with stage 0 or 1 breast cancer stands at almost 100% and around 93% for stage 2. As the disease advances with decreasing survival, the rate detoriates to 72% for stage 3 and about 22% for stage 4 (ACS, 2018). Undoubtedly, earlier presentation is synonymous with better prognosis and survival. In fact data indicates that early stage breast cancer diagnoses has 90% survival rate as compared to 27% for the advanced states (ACS, 2018). In this regard, governmental and non-governmental agencies are working tirelessly towards the realization of improved breast cancer care and survival through early presentation and detection. For instance, the Sustainable Development Goal (SDG) Target 3.4 seeks to reduce by one third, premature mortality from cancers and other non-communicable diseases through prevention and treatment. Clearly, early presentation, diagnoses and treatment will assist in the realization of the SDG target 3.4 goal. To achieve this, research must be focused on early presentation among women with breast cancer.. However, current studies have focused mainly on advanced breast cancer regarding treatment, symptoms experience (emotional and psychological), coping and support systems, and the reasons for delayed diagnoses and treatment. Objective In this review, it is argued that, rather than focusing on advanced breast cancer which has been adequately explored, the attention has to be on what measures or approaches promote early presentations among Ghanaian women. Methods The review included all primary studies that provided answers to the phenomenon of interest. It included both quantitative and qualitative studies. Search scope encompassed studies within the last ten years; thus from 2010 to 2020 irrespective of the country of study.Studies were included if: The paper is of a primary study; the study population included women with early BC or BC symptoms; the study outcome is the association between early stage breast cancer and earlier presentation; the study has a comprehensive data analysis protocol; the results of the studies are unique.A thorough literature search was conducted using the following electronic database: Google scholar and Pubmed. Google scholar alert on new studies was subscribed. This gave update on newly published papers for appraisal and possible inclusion.Manual identified of other potentially eligible publications by searching the reference lists of retrieved studies was also done. After a thorough search, this review included studies from several countries around the Globe such as Ireland, London, Turkey, Iran, Ghana, Kenya, Ethiopia etc Data Collection The title and or abstract of all retrieved papers were independently scanned through to establish which studies should be further evaluated. The full texts of these potential articles were then assessed. Extraction The Cochrane extraction form for data extraction was resorted to. From each eligible article, the following study identifiers/information were extracted: author(s), first author, year, title, objective, article type, location, setting, study design and method, sample size, instruments used, and results. Results Prompt help seekers mainly self-discovered their BC, and this occurred through accidental touch, after menstruation, through breastfeeding, during grooming, and while taking their bath.Notably, women who were termed prompt help seekers had higher seriousness perception of their symptoms. This was likened to their level of understanding and awareness, as well as periodic examination and comparison. Similarly, women who knew they were at risk for breast on account of family history, and increased incidence of BC in their localities, labeled their initial symptoms as requiring prompt attention.Following interpretation and labeling of symptoms, the participants generally resorted to symptom monitoring until the onset of additional and or intense symptoms. Though most women thought of benign growths, a few feared it could be malignant. These emotional reactions led the women to purposively seek clarification by selectively consulting others. Further, participants opened up to social acquaintances such as family relationships, people with prior experience of breast disease, and in some few instances health professionals. Some women also resorted to media items to better their understanding. Remarkably, prompt help seekers sort for help within one month. Last but not least, some women first communed with their creator after discovery and labeling based on their spiritual affiliations.Also, researchers should consider conducting surveys to assess the BC risks for specific smaller groups. This would help tailor specific educational interventions to promote earlier presentation and treatment among the vulnerable.

Microsporidia are intracellular parasites infecting a wide range of vertebrates and invertebrates. In bees, they cause a diarrheal disease called nosematosis, which represents a growing problem contributing to the decline of bee colonies. This parasitic disease infects the gastrointestinal tract of bees, disrupts their immune system, weakens them, and shortens their lifespan. There are two known species of this microsporidial parasite with a global distribution: Vairimorpha apis and Vairimorpha ceranae, with current research indicating that the species V. ceranae is gradually replacing V. apis. In this study, we focused on the detection and occurrence of Vairimorpha spp. in bee colonies kept in different environments, as well as on comparing the impact of hive location on its occurrence. The methods used included sampling from winter bee carcasses, microscopic examination of bee gut contents, and subsequent molecular duplex PCR analysis. Altogether, we examined 82 hives located at 4 different sites and focused on the impact of transportation as an abiotic factor disturbing bees leading to the development of Vairimorpha spp. disease. The results indicate an increased occurrence of this parasite in hives located in urban sites and hives situated in intravillage locations, which may be attributed to transportation and associated vibrations as an abiotic stress factor. Detection revealed that all samples were positive for Vairimorpha ceranae.

Defining integrals over volume element in curved spacetime together with the mass and energy densities within that region of spacetime is apparently equivalent to the given energy and mass of that body or particle. With this in mind equations involving energies and masses can be rewritten in terms of their densities and the integral over the curved space-time volume element. The idea find its place in quantum mechanical frameworks systematically accounting for the effect of spacetime volume structures and gravity on dynamics of quantum systems. This article briefly explores these concepts and runs through various frameworks and equations relevant to this idea including the quantum stress energy tensor, and expressing Schrodinger’s equation in ways that are tied to general relativity it also discusses the cosmological constant and the cosmological constant problem.

The presented work shows that a force (electromagnetic or gravitational) field surrounding any material body is not limitless, but has the external and internal boundaries (radii). Understanding the fact of the existence of the field boundaries allows us to solve the problem of infinities that exists in electrodynamics. It is shown that there are two different electrostatic potentials: with the dimension of speed and with the dimension of the square of speed.

The Parecis Basin is one of the largest intracratonic basins in Brazil. Despite its considerable size, the basin has yet to be extensively explored, with only five wildcat wells drilled for hydrocarbons. So far, no commercial discoveries have been announced. Regional studies have suggested Paleozoic sedimentation, while recent studies indicate a Neoproterozoic fill. However, no tectonic model accurately describes the basin’s development, and no detailed structural map for the entire basin has been published. The present work presents a new detailed structural map of the Parecis Basin based on a four-step interpretation workflow integrating seismic and gravimetric data. The first step includes converting the public 2D seismic lines to the depth domain. The second step is estimating the residual Bouguer anomaly, where the computed residual anomalies should relate to the basin’s tectonic features. The third step comprises the 2D forward modeling of the gravimetric anomalies using the 2D seismic interpretation as a constraint. The final step compiled all the interpreted features into our new structural map. This map reveals the top of the basement, forming a complex framework of horsts and grabens. Normal faults define the main structural style in the basin. Further, we could recognize thick, high-density bodies embedded in the crystalline basement. These bodies consist of Orosian-Calimian (1.8-1.6 Ga) mafic and ultramafic rocks, which may be a potential source for hydrogen exploration in the basin. Subsequent geophysical and geochemical surveys will assess the hydrogen potential in the area.

Infrastructure such as transport, electricity, telecommunications, and sanitation are indispensable drivers for improving the country’s social and economic development. The industrial, agricultural, fisheries and service sectors are also key tools for the country's economic growth. This study aims to analyze the influence of infrastructure development on Djibouti’s economic growth and determine the other economic sectors. This study employs multiple regression analyses from Eviews Software to establish a correlation between these variables and Djibouti’s economic growth, utilizing data spanning from the period 2013 to 2022. The results reveals that mobile cell phone subscriptions, and the people using the health service management, industry, and service have a positive and highly significant influence on Djibouti's economic growth. The study found that access to electricity has a positive influence on economic growth in Djibouti, but is not statistically significant. In addition, the study shows that agriculture, forestry, and fisheries have a negative influence on economic growth in Djibouti, but are statistically significant. Therefore, we recommend that the Government of Djibouti strengthen and ensure the benefit of developing electricity infrastructure in Djibouti and the agriculture, forestry, and fisheries sectors to achieve sustainable economic growth in the coming years.

Traditional methodologies for measuring combat effectiveness rely on various contribution factors, where the main challenge lies in the complexity and subjectivity of these factors. Using frontline variation to measure combat effectiveness circumvents the limitations of many previous methods regarding complexity and subjectivity. Employing this methodology, we have quantitatively measured the combat effectiveness of both parties in the Russo-Ukrainian War across various temporal scales. Utilizing the time series data derived from our measurements, we constructed Daily, Weekly, Monthly, and Annual Candlestick Charts to illustrate the variation trends in combat effectiveness between the two sides across different temporal scales. This comprehensive approach facilitated a nuanced and all-encompassing analysis of the conflict, capturing the intricate dynamics of individual military engagements and the broader strategic operations' context. This case underscores the distinctive utility of our method in quantifying combat effectiveness, offering detailed and strategically significant insights.

The study explores how different dimensions of perfectionism influence psychological well-being (PWB) in emerging adults. Literature has deepened the relationships between maladaptive perfectionism (e.g., excessive self-criticism, perceived discrepancy from the standards) and low PWB. Less is known about whether and how adaptive perfectionism (e.g., pursuing personal standards) relates to PWB. Secondly, the study has investigated whether self-compassion (i.e., self-benevolence, seeing personal imperfections as a common condition) may mediate the relationships between adaptive/maladaptive perfectionism and PWB. Participants (N=217, 18-35 y. o.) completed self-report questionnaires measuring: adaptive/maladaptive perfectionism (Almost Perfect Scale-Revised, APS-R: high standards and order/discrepancy, respectively), PWB, and self-compassion (SCS). Adaptive perfectionism resulted associated with PWB, particularly higher presence of purpose in life, environmental mastery, self-acceptance, and personal growth. Conversely, discrepancy resulted the most robust predictor of low PWB (β=-.68), followed by high standards with a positive direction (β=.23; Rc²=.514, p&lt;.001). A strong negative association emerged between discrepancy and SCS (r=-.67, p&lt;.001). A mediation analysis shows that self-compassion has an indirect effect reducing the strength of the relationship between discrepancy and low PWB. Results suggest focusing on self-compassion as a buffer factor that reduces the negative impact of maladaptive perfectionism on psychological well-being. Implications for education and health psychology are discussed.

An Indo-French campaign was conducted during May 2014 at Gadanki (13.5^oN, 79.2^oE), India, for investigating gravity wave (GW) coupling between the lower and middle atmospheres using a suite of experimental techniques. In this paper we are presenting the sources for those GWs which are observed at airglow layer (~87 km) using (OH) Airglow Imager during the campaign. For this purpose we have developed a background model atmosphere by combining the ERA-Interim, MSIS E 90 model and HWM 07 model data sets. Uniqueness of the present study lies in using near-real time background atmosphere data from simultaneous radiosonde and SVU Meteor Radar covering both source and propagation/ dissipation regions of GWs. We have observed 17 wave events and used GROGRAT model for reverse tracing to locate the source(s). When we searched for the sources near the terminal points or along the ray path, deep convection is found to occur but no strong wind shear. This indicates that the source for the observed GWs is deep convection. We have also simulated small scale waves that can reach mesosphere during different seasons (background conditions). GWs with periods less than 100 minutes and horizontal wavelengths less than 200 km are mostly reaching the mesospheric altitudes. Interestingly, it is found that only few GWs that are generated in the troposphere reach the mesospheric altitudes during the monsoon season, though strong sources like convection and wind shear persist throughout this season. Thus, background wind plays significant role in deciding the propagation of GWs in to upper atmosphere.

The growing shift toward Internet of Things (IoT)-based solutions expands the attack surface of systems by connecting an extensive network of heterogeneous devices and technologies. The heterogeneity of IoT devices and the scale of the network often make conventional security measures impractical. Therefore, recent research efforts have focused on machine learning (ML)-based device-agnostic IoT security solutions. However, most proposed solutions have focused solely on detecting malicious traffic in IoT networks. While this is important, further information about the attack is needed to provide a comprehensive defense before, during, and after the incident. To address this gap, we proposed an anomaly-based intrusion detection model that detects malicious traffic and identifies the attack category and subcategory with high accuracy, recall, precision, and F1-score. The proposed intrusion detection model is an ensemble model that integrates multiple ML models to produce more robust and reliable detections. For evaluation, we performed three sets of experiments: (1) a binary classification to detect malicious traffic; (2) a multi-class classification to detect the attack category; and (3) a multi-class classification to detect the attack subcategory. In the experiments, our model achieved an accuracy, recall, precision, and F1-score of 100% for the binary detection; a precision, recall, and F1-score of 99% and an accuracy of 100% for the multi-class category classification; and an accuracy, recall, precision, and F1-score of 88% for the multi-class subcategory classification. These results suggest that the proposed model can reliably detect anomalies in IoT devices.