Abstract: The expansion of global industries results in the release of harmful volatile acid vapors into the environment, posing a threat to various life forms. Hence, it's crucial to prioritize the development of swift sensing systems capable of monitoring these volatile acid vapors. This initiative holds great importance in safeguarding a clean and safe environment. This paper presents the synthesis and characterization of pyrene-based covalent organic frameworks (COFs) demonstrating exceptional crystallinity, thermal stability, and intense fluorescence. Three COFs—PP-COF, PT-COF, and PE-COF—were synthesized, showcasing large surface areas and robust thermal stability up to 400 °C. The fluorescence properties and intramolecular charge transfer within these COFs were significantly influenced by their Schiff base bonding types and π-stacking degrees between COF layers. Notably, PE-COF emerged as the most fluorescent among the three COFs and exhibited exceptional sensitivity and rapid response as a fluorescent chemosensor for detecting HCl in solution. The reversible protonation of imine bonds in these COFs allowed for the creation of highly sensitive acid vapor sensors, showcasing a shift in spectral absorption while maintaining structural integrity. This research highlights the potential of COFs as reliable and reusable sensors for detecting harmful acid vapors, addressing environmental concerns arising from industrial activities.

We analysed changes in magnitude and timing of the largest annual observed daily flow (Amax), in each water year, for 596 stations in high-value water resources catchments and flood risk locations across Australia. These stations are either included in the Bureau of Meteorology's Hydrologic Reference Stations, or used in its operational flood forecasting services. Monotonic trend (which are either consistently increasing or decreasing) analyses of the magnitude and timing of flood peaks (estimated using Amax) were performed using Theil-Sen and Mann-Kendell approach and circular statistics to identify strength of seasonality and timing. Regional significance at the drainage division scale was analysed using the Walker test. Monotonic decreasing trends in Amax flood magnitude were detected in the Murray-Darling River basin and in other drainage divisions in Victoria, south-west and mid-west of Western Australia and South Australia. No significant obvious pattern in Amax magnitude was detected in northern Queensland, coastal NSW, central Australia and Tasmania. Only the Tanami-Timor Sea Coast drainage division in northern Australia showed monotonic increasing trends. Monotonic trends in Amax magnitude were regionally significant at the drainage division scale. We found two distinct patterns in flood seasonality and timing. In the northern and southern parts of Australia, flood peaks generally occur during February to March and August to October, respectively. The strength of this seasonality varies across the country. Weaker seasonality was detected for locations in the Murray-Daring River basin, and stronger seasonality was evident in northern Australia, south-west of Western Australia, South Australia, Victoria and Tasmania. The trends of seasonality and timing reveal that in general, flood peaks are occurring later in the water year in recent years. In northern Australia, flood peaks are generally occurring earlier – at a rate of 12 days/decade. In Victoria, New South Wales and Tasmania, trends in timing are generally mixed. However, in the south-west of Western Australia, the largest change in timing was evident – with Amax peaks commencing later at a rate of 15 days/decade. Decadal variability in flood timing was found at the drainage division scale as well. Most stations show a decreasing trend in Amax magnitude, but how that trend is associated with the change in timing is not clear.

Due to urban warming, energy demand for cooling buildings is rising. The current study used CitySim to estimate the cooling energy requirements for 40 buildings in Downtown, Dubai using high-resolution climate data from weather research and forecasting (WRF) coupled with single layer urban canopy model (SLUCM). Simulating the four mitigation scenarios allowed for the examination of the reduction in cooling load caused by the addition of greenery at a rate ranging from 25% to 100%. The insulated building's cooling demand reduced by a maximum of 13.89% under 100% GI (M4). Scenario M4 resulted in a reduction of 4.6 kWh/m2 and 3.1 kWh/m2 for the non-insulated and insulated low-rise residential buildings, respectively, while the high-rise buildings saw a reduction of 3.09-4.91 kWh/m2 for the non-insulated and 2.07-3.09 kWh/m2 for insulated buildings. This study offered a potential remedy to deal with the problem of urban heating in subtropical environments.

Previous research via cell experiments has shown that ultrafine particles (UFPs, particles less than 100 nm) emitted from Three-Dimensional desktop printers (3D printers) had cytotoxicity. However, a few particles from different filaments and their cytotoxicity combinations have been tested. Here we quantify emissions of UFPs and use Air-Liquid Interface (ALI) from one commercially available filament extrusion desktop 3D printer utilizing three different filaments by controlled experiments. A549 cells were exposed at the ALI to UFPs generated by a working 3D printer for an average of 45 minutes and 90 minutes. Twenty-four hours after exposure, cells were analyzed for percent cytotoxicity grown on the 24-well ALI insert (LDH assay). UFP exposure resulted in decreased cell viability (significantly increased LDH levels). The result shows that Acrylonitrile butadiene styrene (ABS) has the most significant particle emission. ALI exposures enable in vitro testing of mixtures of particles such as UFP from a 3D printer. ABS is the only filament with a significant difference compared with the HEPA control in 90 minutes of exposure (p-value <0.05). ABS and PETG we used during the experiment presented a significant difference compared with the HEPA control in 45 minutes of exposure.A screening analysis of potential exposure to these products in a typical environment suggests caution should be used when operating many printer and filament combinations in poorly ventilated spaces or without the aid of combined gas and particle filtration systems.

The exponential growth of population and the consistent food demand has compelled humanity to seek alternatives to traditional farming and innovative technologies to increase production. Exploring offshore for natural resources and alleviating pressure on land has been an ongoing research field, especially in the energy and aquaculture sector. However, the idea of floating farming is still in its infancy and requires significant innovations. The work presented here shed further light on this area by proposing a comprehensive model of ‘Integrated, multicultural, Multileveled Floating Farm (MFF).’ Various aspects of planning, design, constructions and operations of such MFF are discussed. An integrated waste management system is proposed to improve sustainability. The conceptual design and associated financial analysis demonstrated that such integration of various modes of farming could be profitable and sustainable at the same time. The cost estimation and profit analysis are presented in the context of Singapore, and a conservative approach is followed for the calculation. However, the model can easily be extended for application in other countries.

(1) Background: Work creativity, manifested in innovative workplace behaviour (IWB) and employee work engagement, is fundamental to maintain firms’ sustainability and competitiveness. In this regard, this study aims at investigating the supporting effect of innovative leadership on IWB and employee engagement through maximising employee vigour, dedication and absorption. (2) Methods: The study data were collected from questionnaires administered to 150 respondents working in mobile phone companies in southern and central Iraq. The statistical analyses were conducted through the Statistical Package for the Social Sciences (SPSS) and Smart PLS. In analysing the measurement model and testing the proposed hypotheses, the study results revealed that inclusive leadership and work engagement were intimately connected to IWB; (3) Results: Work engagement played a mediating role between inclusive leadership and IWB. The questionnaire data indicated that inclusive leadership behaviours, such as openness, accessibility and availability, motivated the subordinates to be engaged in IWB.; and (4) Conclusions: To promote IWB, company leaders then need to effectively engage their followers by taking pride and satisfaction in employee output, which might aid employee workplace and IWB engagement.

Network slicing is a promising technology for 5G networks in which operators can sell customized services to different tenants at various prices and Quality of Services (QoS) demands. Thus, the latest 4th Generation (4G) and upcoming 5th Generation (5G) mobile technologies are expected to offer massive connectivity and management of high volume of data traffic in the presence of immense interferences from mobile networks of IoT devices. Further, it will face challenges of congestion and overload of data traffic due to the humongous number of IoT devices. Nevertheless, these devices are likely to demand high throughput, low latency, and high level of reliability especially for critical real-time applications such as in Vehicular Communication System (VCS). To address these issues in 5G mobile networks, this paper proposes a Slice Allocation Management (SAM) Model based on the critical services of smart systems such as VCS to satisfy QoS demands. The proposed model aims at providing dedicated slices on the basis of service requirements such as expected throughput and latency for VCS. To ensure such performance and provide data traffic priorities of IoT devices in the uplink of Relay Nodes (RNs) cells in the 5G mobile networks, we have sliced the Radio Access Networks (RAN), along with the assignment of the nearest Mobile Edge Computing (MEC) with isolated slices based on the priorities for each IoT nodes to reduce latency level. The proposed model was simulated and validated using the OPNET simulator. The results obtained demonstrate that SAM Model is able to achieve improvement of end to end delays and uplink throughputs of the networks in high-density networks of IoT devices.

Nodes in wireless sensor networks (WSN) are characterized particularly by their limited power and memory capabilities. Limited memory is an important parameter as it defines the size of the operating system and the processing code. As established previously, energy and memory efficiency is the most important evaluation factors of WSNs as they are directly related to data loss and network lifetime. However, based on our simulation results, memory efficiency determines the selection or abandon of nodes by the botmaster for the propagation of bots in an IoT infrastructure. Consequently, the node’s memory efficiency determined the spread of bots in the network and provides defense actors with an insight of the botmaster behavior for mitigation of the attack. Conventional botnet propagation and mitigation models did not consider the impact of node’s memory efficiency in the IoT platform. To address this gap, we build IoT-SIEF, a novel propagation model with forensic capability that will analyze command and control propagation behavior based on the perspective of the node’s memory efficiency. IoT-SIEF model used to explore the dynamics of propagation using numerical simulation with more than 50% outperform other models in mitigating the number of secondary bots. Consequently, it can serve as a basis for assisting the planning, design, and defense of such networks from the investigator's point of view.

For a given set of plasma parameters, along a single series (Lyman, Balmer etc) the lines with higher principal quantum number(n) lines get progressively wider, closer to each other, and start merging for a certain critical n. In the present work four different codes(with further options) are used to calculate the entire Balmer series for moderate and high electron densities. Particular attention is paid to the relevant physics, such as the cutoff criteria, strong and penetrating electron collisions.

We investigate entropy generation in unsteady three-dimensional axisymmetric MHD nanofluid flow over a non-linearly stretching sheet. The flow is subject to thermal radiation and a chemical reaction. The conservation equations were solved using the spectral quasi-linearization method. The novelty of the work is in the study of entropy generation in three-dimensional axisymmetric MHD nanofluid and the choice of the spectral quasilinearization method as the solution method. The effects of Brownian motion and thermophoresis are also taken into account when the nanofluid particle volume fraction on the boundary in passively controlled. The results show that as the Hartman number increases, both the Nusselt number and the Sherwood number decrease whereas the skin friction increases. It is further shown that an increase in the thermal radiation parameter corresponds to a decrease in the Nusselt number. Moreover, entropy generation increases with the physical parameters.

Survivability is a critical concern in WSNs, heavily influenced by energy efficiency. Addressing severe energy constraints in WSNs requires solutions that meet application goals while prolonging network life. This paper presents an energy optimization approach (EOAMRCL) for WSNs, integrating the Grey Wolf Optimization (GWO) for enhanced performance. EOAMRCL aims to enhance energy efficiency by selecting the optimal duty-cycle schedule, transmission power, and routing paths. The proposed approach employs a centralized strategy using a hierarchical network architecture. During the cluster formation phase, an objective function, augmented with GWO, determines the ideal cluster heads (CHs). The routing protocol then selects routes with minimal energy consumption for data transmission to CHs, using transmission power as a metric. In the transmission phase, the MAC layer forms a duty-cycle schedule based on cross-layer routing information, enabling nodes to switch between active and sleep modes according to their network allocation vectors (NAV). This process is further optimized by an enhanced CSMA/CA mechanism, which incorporates sleep/activate modes and pairing nodes to alternate between active and sleep states. This integration reduces collisions, improves channel assessment accuracy, and lowers energy consumption, thereby enhancing overall network performance. EOAMRCL was evaluated in a MATLAB environment, demonstrating superior performance compared to EEUC, DWEHC, and CGA-GWO protocols, particularly in terms of network lifetime and energy consumption. This highlights the effectiveness of integrating GWO and the updated CSMA/CA mechanism in achieving optimal energy efficiency and network performance.

Software-Defined Networking (SDN) has revolutionized network management by providing unprecedented flexibility, control, and efficiency. However, its centralized architecture introduces critical security vulnerabilities. This paper introduces a novel approach to securing SDN environments using IOTA 2.0 smart contracts. The proposed system utilizes the IOTA Tangle, a directed acyclic graph (DAG) structure, to improve scalability and efficiency while eliminating transaction fees and reducing energy consumption. We introduce three smart contracts: Authority, Access Control, and DoS Detector, to ensure trusted and secure network operations, prevent unauthorized access, maintain the integrity of control data, and mitigate denial-of-service attacks. Through comprehensive simulations using Mininet and the ShimmerEVM IOTA Test Network, we demonstrate the efficacy of our approach in enhancing SDN security. Our findings highlight the potential of IOTA 2.0 smart contracts to provide a robust, decentralized solution for securing SDN environments, paving the way for the further integration of blockchain technologies in network management.

Cercospora beticola Sacc. is an ascomycete pathogen that causes Cercospora leaf spot in sugar beets (Beta vulgaris L.) and other related crops. The disease symptoms are characterized by circular lesions with an ash-gray centre and dark brown to purple margins on the leaves. It can lead to significant yield losses if not effectively managed. This study aims to characterize and assess the impact of bacterial biological control agents against C. beticola. Following a dual-culture screening, 18 bacteria exhibiting over 50% inhibition were selected, with six of them demonstrating more than 80% control. Identification of the bacteria was carried out through sequencing of the16S rDNA, revealing potentially 12 species belonging to six genera including Bacillus which was represented by four species. Additionally, the bacteria underwent in-depth characterization of biochemical and molecular properties, as well as plant-growth promotion. PCR detection of genes responsible for producing antifungal metabolites revealed that 83%, 78%, 89%, and 56% of the selected bacteria possessed the bacillomycin, iturin, fengycin, and surfactin encoding genes, respectively. Infrared spectroscopy analysis confirmed the presence of lipopeptide structure in the bacteria supernatant filtrate. Subsequently, the bacteria were assessed for their effect on sugar beet plants in controlled conditions. The bacteria exhibited notable capabilities, promoting growth in both roots and shoots, resulting in significant increases in root length, weight, and shoot length. The field experiment with four bacterial candidates demonstrated good performance against C. beticola compared to difenoconazole fungicide. These bacteria played a significant role in disease control, achieving a maximum efficacy of 77.42%, slightly below the 88.51% efficacy attained by difenoconazole. Additional field trials are necessary to verify the protective and growth-promoting effects of these candidates, whether applied individually, combined in consortia, or integrated with chemical inputs in sugar beet crop production.

Metabolic dysfunction-associated fatty liver disease (MAFLD) has now affected nearly one third of global population and became the number one cause of chronic liver disease in the world because of the obesity pandemic. Chronic hepatitis resulting from hepatitis B virus (HBV) and hepatitis C virus (HCV) also remain significant challenges to liver health even in the 21st century. The coexistence of MAFLD and chronic viral hepatitis can markedly alter the disease course of individual diseases and can complicate the management of each of these disorders. Thorough understanding of the pathobiological interlink and interactions between MAFLD and these two chronic viral hepatitis infections are crucial for appropriate management of patients. We update these interlinks in this comprehensive clinical review.

In this study, we first discover some new concept coordinated UD-convex mappings with fuzzy-number values. After that, we look into Hermite-Hadamard type inequalities via fuzzy-number-valued coordinated UD-convex fuzzy-number-valued mapping (coordinated UD-convex FNVM). In the case of coordinated UD-convex FNVM, novel conclusions are derived by making particular decisions in recently proven inequalities. Additionally, it is demonstrated that the recently discovered inequalities are expansions of comparable findings in the literature. It is important to note that the main outcomes are validated by nontrivial examples.

This article presents a new design of supporting tethers through the concept of force distribution. The transmitted force applied on tethers will be distributed on the new tether design area resulting in low acoustic energy transferred to anchor boundaries and stored energy enhancement. This technique achieves an anchor quality factor of 175,000 compared to 58,000 obtained from con-ventional tether design representing 3-fold enhancement. Also, the unloaded quality factor of the proposed design improved from 23,750 to 27,442 representing 1.2-fold improvements.

The paper concludes that the choice of charging strategy depends on the specific requirements and limitations of the off-grid solar PV system, and that a careful analysis of the factors that affect performance is necessary to identify the most appropriate approach. Also provides valuable insights for designing and optimizing off-grid solar PV systems, which can help to improve the efficiency, reliability, and cost-effectiveness of these systems.

Numerous goods and services are now offered through online platforms due to the recent growth of online transactions like e-commerce. Users have trouble locating the product that best suits them from the numerous products available in online shopping. Many studies in deep learning-based recommender systems (RSs) have focused on the intricate relationships between the attributes of users and items. Deep learning techniques have used consumer or item-related traits to improve the quality of personalized recommender systems in many areas, such as tourism, news, and e-commerce. Various companies, primarily e-commerce, utilize sentiment analysis to enhance product quality and effectively navigate today's business environment. Customer feedback regarding a product is gathered through sentiment analysis, which uses contextual data to split it into separate polarities. The explosive rise of the e-commerce industry has resulted in a large body of literature on e-commerce from different perspectives. Researchers have made an effort to categorize the recommended future possibilities for e-commerce study as the field has grown. There are several challenges in e-commerce, such as fake reviews, frequency of user reviews, advertisement click fraud, and code-mixing. In this review, we introduce an overview of the preliminary design for e-commerce. Second, the concept of deep learning, e-commerce, and sentiment analysis are discussed. Third, we represent different versions of the commercial dataset. Finally, we explain various difficulties facing RS and future research directions.

Abstract: Introduction: A retrospective case-controlled study was performed to evaluate the out-comes of shoulder arthroplasty performed as a day case in carefully selected patients, compared to the traditional inpatient approach. Materials & Methods: Patients who had total or hemiarthro-plasty of the shoulder performed as a day case or inpatient procedure were recruited. The primary outcome compared rates of uneventful recovery, defined by the absence of any complications or readmission to hospital within six months of surgery, between Inpatient and Outpatient groups. Secondary outcomes included examiner-determined functional scores and patient-determined pain scores at one, six, twelve, and twenty-four weeks post-surgery. A further assessment of pa-tient determined pain scores was carried out at a minimum of two years post-surgery (5.8 ± 3.2). Results: 73 patients (36 Inpatients and 37 Outpatients) were included in the study. Within this time frame 25/36 inpatients (69%) had uneventful recoveries compared to 24/37 outpatients (65%) (p = 0.17). Outpatients showed significant improvement over pre-operative baseline levels in more of the secondary outcomes (strength and passive range-of-motion) by six months post-operation. Outpatients also performed significantly better than Inpatients in external rotation (p<0.05) and internal rotation (p=0.05) at six-weeks post-surgery. Both groups showed significant improvement compared to pre-operative baselines in all patient-determined secondary outcomes except level of activity at work and sport. Inpatients, however, less severe pain at rest at six weeks (p=0.03), sig-nificantly less frequent pain at night (p=0.03) and extreme pain (p=0.04) at 24 weeks; and less se-vere pain at night at 24 weeks (p<0.01). By minimum two years postoperation, inpatients were more comfortable repeating their treatment setting for future arthroplasty (16/18) compared to outpatients (7/22) (p = 0.0002). Conclusions: At a minimum of two years follow up, there were no significant differences in rates of complications, hospitalisations, or revision surgeries between pa-tients that underwent shoulder arthroplasty as an inpatient versus as an outpatient. Outpatients demonstrated superior functional outcomes but reported more pain at six months post-surgery. Patients in both groups expressed a preference for inpatient shoulder arthroplasty in future. What is Known About This Subject: Shoulder arthroplasty is a complex procedure, and has tradition-ally been performed on an inpatient basis, with patients admitted for six to seven days post-surgery. One of the primary reasons for this is the high level of postoperative pain, usually treated with hospital-based opioid therapy. Two studies demonstrated outpatient TSA to have a similar rate of complications as inpatient TSA, however these studies only examined patients within a shorter term 90 day postoperative period, and did not evaluate functional outcomes between the two groups or in the longer term. What This Study Adds to Existing Knowledge: This study provides evidence supporting the longer-term results of shoulder arthroplasty done as a day case in carefully selected patients, which are comparable to outcomes in patients that are admitted to hospital post-surgery.

To prolong the fatigue life of a product handled by machine, parametric accelerated life testing (ALT) is mentioned as an organized technique to pinpoint design flaws and minimize fatigue-connected failures. It requires (1) an ALT procedure, (2) fatigue model, (3) parametric ALTs with adjustment, and (4) an approximate of whether present product complete the BX life. The use of a quantum-transported time-to-failure archetype and a sample size are advised. The improvements in the reliability of a refrigerator ice-maker, comprising an auger motor with bearing, were utilized as a case investigation. In the 1st ALT, a steel rolling bearing cracked due to repeated loads under cold circumstances (below −20 C) in the freezer compartment. The bearing was altered by adjusting the matter from AISI 52100 alloy steel with 1.30-1.60% chromium to lubricated sliding bearing with sintered and hardened steel (FLC 4608-110HT) because of its high fatigue strength at lower temperatures. In the 2nd ALT, a helix made of polycarbonates (PCs) fractured. As an adjustment, a reinforced rib of the helix was thickened. As no troubles in the 3rd ALT occur, the lifetime of an ice-maker was proved to be B1 life 10 years.

The construction field uses up over one-third of the global energy consumption and contribute to 40% of CO2 emissions according to the International Energy Agency (IEA) and the 2020 annual reporter of United Nation, Goal 11 (Make cities inclusive, safe, resilient and sustainable) which discusses sustainable, safe and efficient buildings. Therefore, Morocco has a commitment to this program by publishing the law 47-09 of energy efficiency. This work aims to study the energy efficiency of two types of building, a conventional and a natural building. Conventional building is constructed using concrete, while the natural one uses sand clay and straws. As for the technique of making the natural building, it perpetually follows the same approach accustomed in rural zones of Atlas Mountains in Morocco. In this research we also simulate, temperature and humidity variation inside these buildings using TRNSYS software. Sketch Up software was employed to design these houses. The weather database is used for a typical meteorological year (TMY). In the case of natural building, many building configurations were simulated: roof insulation, floor insulation, different types of glazing and sun protection. What's more, the thermal comfort is revealed to be more conspicuous in the case of natural building.

Electronic Health Record (EHR) is being used in most healthcare institutions to preserve and share health records instead of a paper-based method. Data records must be exchanged amongst various parties and users' privileges to manage access to their records should also be provided. In addition to the basic standards of secrecy, confidentiality and integrity of information, these facts further demonstrate the need for interoperability and consumer control to access their personal data. Electronic Health Record (EHR) system faces issues of protection of data, trust and management issues. In recent Covid-19 pandemic, various applications, tools and websites were launched that stores records. Also, many personal records related to health need to be shared among different parties for early detection, contact tracing, monitoring and the future prediction that requires accurate and reliable data. Simultaneously, the citizens will be hesitant in providing their personal details due to privacy concerns and social stigma. Blockchain technology has arisen as a powerful technology that can offer the immutability, confidentiality and user access properties of stored information and provided distributed storage. This paper analyses the blockchain suitability in EHR and its further applications in efficient Covid-19 pandemic management.

Recently, the conformable derivative and its properties have been introduced. In this paper, we propose and prove some new results on conformable Boundary Value Problems. First, we introduce a conformable version of classical Sturm´s separation, and comparison theorems. For a conformable Sturm-Liouville problem, Green's function is constructed, and its properties are also studied. In addition, we propose the applicability of the Green´s Function in solving conformable inhomogeneous linear differential equations with homogeneous boundary conditions, whose associated homogeneous boundary value problem has only trivial solution. Finally, we prove the generalized Hyers-Ulam stability of the conformable inhomogeneous boundary value problem.

Background: The incidences of COVID-19 related suicide among adolescents and youths have been reported across the world. There is no cumulative study focusing on nature, patterns, and causative factors that lead to the present investigation. Methods: A purposive sampling of google news between 15 February to 6 July was performed. After excluding duplicate reports, the final list comprised a total of 37-suicide cases across 11 countries. Results: More male suicides were reported (21-cases, i.e., 56.76%), and the mean age of the total victims was 16.6±2.7 years (out of a total of 29-cases). About two-thirds of the suicides were from three countries named India (11-cases), United Kingdom (8-cases), and the USA (6-cases). Out of 23-student victims, 14 were school-going students. Hanging was the most common suicide method accounting in 51.4% of cases. The most common suicide causalities were related to mental sufferings such as depression, loneliness, psychological distress, etc., whereas either online schooling or overwhelming academic distress was placed as the second most risk factors followed by TikTok addiction-related psychological distress, and tested with COVID-19. Conclusion: The finding of the temporal distribution of suicides concerning lockdowns may help in exploring and evolving public measures to prevent/decrease pandemic-related suicides in young people.

Abstract: Background: Adolescents frequently self-report pain, according to epidemiological research. The knee is one of the sites where the pain is most common. One of the main factors contributing to the number of years people spend disabled and having substantial personal, societal, and economic burdens globally is musculoskeletal disorders. Insidious, slowly building onset that neither the adolescent nor the parent is aware of [5]. Patellofemoral Pain (PFP) is a clinical knee pain commonly affecting adolescents. In the present study, the authors aimed to estimate the frequency of knee pain in Saudi adolescents. Methods: This cross-sectional survey carried out from June to November 2022 included 676 adolescents, ages 10 to 18. The data are presented as frequencies and percentages for categorical variables. Analysis of variance (ANOVA) was used to compare means between groups, while the chi-square test was used for the comparison of categorical variables. Statistical significance was set at p < 0.05. Results: Adolescents were invited to take part in the study; 57.5% were female and 42.5% were male, and 68.8% were aged between 15 and 18. The prevalence of knee pain was considerably high among females (26%), while it was 19.2% among males. Moreover, age was a significant predictor for knee pain, and BMI was as well. We also found a significant difference between BMI classification and stiffness of the knee (p = 0.008). There is a difference between adolescents who do physical activities in leisure and difficulty bending (p = 0.03). Conclusion: Our study noted a high rate of knee pain among adolescents, so we need to raise awareness about risk factors. Adolescent knee pain can be prevented with conservative methods and some minor lifestyle/activity modifications.

The aim of this paper is to study a semi-functional partial linear regression model (SFPLR) for spatial data with responses missing at random. The estimators are constructed by the kernel method, and some asymptotic properties such as probability convergence rates of the nonparametric component and asymptotic distribution of the parametric and nonparametric components are established under certain conditions. Next, the performances and the superiority of these estimators are presented and examined using a study on simulated data and on real data by carrying out a comparison between our semi-functional partially linear model with MAR estimator (SFPLRM), the semi-functional partially linear model with the full-case estimator (SFPLRC) and the nonparametric functional model estimator with MAR (FNPM). The results show that the proposed estimators outperform existing estimators as the number of random missing data increases.

Solar photovoltaic (PV) technology is a cornerstone of the global effort to transition towards cleaner and more sustainable energy systems. This paper explores the pivotal role of PV technology in re-ducing greenhouse gas emissions and combatting the pressing issue of climate change. At the heart of its efficacy lies the efficiency of PV materials, which dictates the extent to which sunlight is transformed into electricity. Over the last decade, substantial advancements in PV efficiency have propelled the widespread adoption of solar PV technology on a global scale. The efficiency of PV materials is a critical factor, determining how effectively sunlight is transformed into electricity. Enhanced efficiency, achieved through a decade of progress, has driven the global expansion of solar PV. Multi-junction photovoltaic materials have now exceeded 40% efficiency in lab tests. China leads the world in solar PV installations, boasting over 253 GW of installed capacity by the end of 2021. Other prominent countries in this sector are the United States, Japan, Germany, and India. Supportive policies like feed-in tariffs, net metering, tax incentives, and cost reductions in PV modules have made solar PV increasingly competitive against fossil fuel-based power generation. Solar PV technology holds immense potential for creating a cleaner, reliable, scalable, and cost-effective electricity system. To expedite its deployment and foster a more sustainable energy future, continued investment in research and development, along with supportive policies and market mechanisms, is essential. This paper underscores the pivotal role of solar PV technology in the global energy transition and advocates for a concerted effort to unlock its full potential in achieving a more sustainable and resilient energy future.

Based on the Flashing Ratchet Potential (FRP) and Electro-Spectroscopy detection techniques, a new detection method was experimentally examined. This method allows the detection of sub-micro particles in the human exhaled air such as viral particles and other biological agents. The detection signal created by this method is carried out by electron current buildup forming an Electric Current-Spectrum (ECS) distinguishing the contents of the exhaled air samples. The detection method was developed based on FRP and a beam of free charges passing through the electrodes of the FRP. The ECS is characterized by low-energy free charges interacting with the medium through which they pass, where numerous free charges are scattered (delayed) as a result of these interactions. The resulting ECS is characterized by FRP's capacity to drift back the delayed free charges to their original starting positions. By comparing the ECS of two exhale air samples, this new technology can be utilized to identify the presence of viral and microorganisms’ particles. The time-escalating ECS difference quickly indicates the presence of such particles. Moreover, the FRP's optimal operating settings was experimentally defined, in addition to the experimental evaluation of its functionality to confirm the FRP's promising sensing capabilities, which were statistically examined several times to ensure the reproducibility of the results.

: This paper proposes a reem-shape phononic crystal for the performance enhancement of TPoS resonators. The proposed phononic crystal offers an ultra-wide acoustic band gap that prevents energy leakage through the supporting substrate on its placement at the anchoring boundary, resulting in significant improvements in the resonator quality factor. Simulated results show reem-shape Phononic crystals generate a band gap up to 175MHz with BG of 90% and enhance the anchor quality factor from 180,000 to 6,000,000 and unloaded quality factor from 133,000 to 160,000 representing 33.3-fold and 1.2-fold improvements respectively.

The process of Thermal spray is effective for creating a metal matrix composite (MMC) by embedding zirconium diboride reinforcement into a molybdenum matrix. This allows for the combination of beneficial properties in a new composite, as both materials have a high The materials Mo and ZrB2 possess different characteristics. For example, Mo has a melting point of 2622 ◦C while ZrB2 has a higher melting point of 3246 ◦C. Additionally, Mo has a high thermal conductivity of 139 W/m◦C compared to ZrB2's thermal conductivity of 24 W/m◦C. However, both materials have good thermal shock resistance, and Mo has a low coefficient of thermal expansion of 5.35 µm/m◦C while ZrB2 has a coefficient of thermal expansion of 5.8 × 10−6 K−1., as well as the ability to maintain strength at elevated temperatures and stability in extreme environments. The study focused on creating Mo/Zrb2 composites using a thermal spray coating technique, varying the parameters of spraying distance, number of passes, and gas pressure, and testing the resulting castings to evaluate their hardness and Young's Modulus. The primary objective of the research was to use the Taguchi technique for identifying the optimal parameters for generating the highest Young's Modulus and hardness for the castings. The Taguchi method integrates experimental and analytical principles to identify the most significant parameter affecting the response, which can significantly enhance overall performance. The study found that the optimal parameters were a spraying distance of 20 cm, gas pressure of 6 bar, and the number of passes of 18. The Taguchi method accurately predicted the parameters that produced the highest properties for the composite coatings, which demonstrated good surface formation without hot cracks and fewer pores, with well-formed metallurgical bonding between the coating and the substrate.

Background: This study aimed to evaluate whether measles vaccine uptake can be predicted directly or indirectly by parental perceptions about the availability of measles vaccine services with parental hesitancy towards the measles vaccine as a potential mediator. Methods: This was a community-based cross-sectional study conducted at Omdurman locality in Khartoum state, Sudan in February 2019. The study population included parents/ guardians having at least one child aged 2 -3 years old. Mediation analysis was conducted using two models, the ordinary least squares path analysis and multiple logistic regression. Results: a total of 495 responded and the mean age of the mothers who participated in the study was 31.1 (SD=5.73). A half of the respondents (50.1%) completed university education and nearly three-quarters of the respondents (74.7%) were housewives. After controlling for the other factors, including the mother’s age and the number of children, parental perception about the accessibility and availability of the measles vaccine influences the uptake of the measles vaccine indirectly through the mediation effect of measles vaccine hesitancy. Conclusions: We suggest that intervening in measles vaccine hesitancy in addition to measles vaccination access issues will have positive impact on the uptake and coverage of the measles vaccine in Sudan.

As the number of ships for marine transportation increases with the advancement of global trade, encountering multiple ships in marine traffic becomes common. This situation raises the risk of collision of the ships; hence this paper proposes a novel Fuzzy-logic based intelligent conflict detection and resolution algorithm, where the collision courses and possible avoiding actions are analyzed by considering ship motion dynamics and the input and output fuzzy membership functions are derived. As a conflict detection module, the Collision Risk (CR) is measured for each ship by using a scaled nondimensional Distance to the Closest Point of Approach (DCPA) and Time to the Closest Point of Approach (TCPA) as inputs. Afterwards, the decisions for collision avoidance are made based on the calculated CR, encountering angle and relative angle of each ship measured from others. In this regard, the rules for the Fuzzy interface system are defined in accordance with the COLREGs, and the whole system is implemented on the MATLAB Simulink platform. In addition, to deal with the multiple ship encounters, the paper proposes a unique maximum-course and minimum-speed change approach for decision making, which has been found to be efficient to solve Imazu problems, and other complicated multiple-ship encounters.

Offshore vessels (OVs) often requires precise station-keeping and some vessels, for example, vessel involves in geotechnical drilling generally use Spread Mooring (SM) or Dynamic Positioning (DP) systems. Most of these vessels are equipped with both systems to cover all ranges of water depths. However, determining which systems to use for a particular operational scenario depends on many factors and requires significant balancing in terms of cost-benefit. Therefore, this research aims to develop a platform that will determine the cost factors for both the SM and DP station keeping systems. Operational information and cost data are collected for several field operations, and Artificial Neural Networks (ANN) is trained using those data samples. After that, the trained ANN is used to predict the components of cost for any given environmental situation, fieldwork duration and water depth. Later, the total cost is investigated against water depth for both DP and SM systems to determine the most cost-effective option. The results are validated using two operational scenarios for a specific geotechnical vessel. This decision-making algorithm can be further developed by adding up more operational data for various vessels and can be applied in the development of sustainable decision-making business models for OVs operators.

Artificial intelligence (AI) techniques have grown rapidly in recent years in the context of computing with smart mobile phones that typically allows the devices to function in an intelligent manner. Popular AI techniques include machine learning and deep learning methods, natural language processing, as well as knowledge representation and expert systems, can be used to make the target mobile applications intelligent and more effective. In this paper, we present a comprehensive view on mobile data science and intelligent apps in terms of concepts and AI-based modeling that can be used to design and develop intelligent mobile applications for the betterment of human life in their diverse day-to-day situation. This study also includes the concepts and insights of various AI-powered intelligent apps in several application domains, ranging from personalized recommendation to healthcare services, including COVID-19 pandemic management in recent days. Finally, we highlight several research issues and future directions relevant to our analysis in the area of mobile data science and intelligent apps. Overall, this paper aims to serve as a reference point and guidelines for the mobile application developers as well as the researchers in this domain, particularly from the technical point of view.

A theoretical nonlocal thermoelastic model for studying the effects of the thermal conductivity variability on a rotating nanobeam has been described in the present article. The theory of thermal stress is employed using the Euler–Bernoulli beam model and generalized heat conduction with phase lags. It is believed that the thermal conductivity of the current model varies linearly according to temperature. Due to variable harmonic heat, the considered nanobeam excited and was subjected to a time-varying exponential decay load. Using the Laplace transform process, the analytical solutions for displacement, deflection, thermodynamic temperature and bending moment of rotating nanobeams are provided in final forms and a numerical example has been taken to address the problem. A comparison of the stated results was displayed and additionally, the influences of non-local parameters and varying load were analyzed and examined. We also investigate how the linear changes in the temperature of physical properties can influence both the static and dynamic responses to the rotating nanobeam.

Maxwell equation for the electric field has been solved for any medium by suggesting the wavenumber and angular frequency be complex quantities. This accounts for the field decay by interaction with the medium.This expression for the time and special decay of the electric field in a medium is used to construct a new wave function sensitive to the medium physical properties. This new wave function, unlike the conventional one, differentiates between a beam of particles in a vacuum and that enters a medium which is an attenuated due to the scattering effect.Another expression for time decaying electric field was obtained using Newton’s laws for frictional medium. This expression shows that the electric field diminishes due to friction.Fortunately, this time decaying part of the electric field is typical to that derived from Maxwell’s equations. Finally, a new Schrodinger equation sensitive to the medium properties was derived. This equation, fortunately, describes some scattering processes for Protein scattering, scattering of x-rays, opto-acoustic phonons, and Raman scattering for some materials successfully .

The sensor nodes have limited computation, sensing, communication capabilities and generally operated by batteries in a harsh atmosphere with non-replenish able power sources. These limitations force the sensor network subject to failure because most of the energy is spent on sensing, computing and data transmission. This paper introduces an Energy Efficient Clustering and Shortest-Path Routing Protocol (EECSRP) to assist Wireless Sensor Networks (WSNs) by (a) extending the lifespan of the network (b) effectively using the battery power (c) decreasing the network overhead and (d) ensuring a high packet transmission ratio with minimal delay. The delay time-based Cluster Head (CH) is elected based on the node degree, residual energy and Received Signal Strength (RSS) to accomplish the goal. Additionally, the RSS-based network partitioning is implemented to evaluate the gradient based on demand routing between source (sensing node) and destination (BS). Whenever the current CH residual energy goes under the threshold level, the proposed protocol performs the clustering process, reducing the exchange of control packets. However, the BS periodically gathers the data from every single CH which helps to reduce the collision and Medium Access Control (MAC) layer conflict. From the simulation results, it is the evident that the proposed protocol performance in terms of average end-to-end latency, packet delivery ratio, average energy consumption and control overhead is better than the well-known current protocols.

Micro-technology has played a substantial role in bioscience, biomedical and biotechnological research due to its core advantages in modern science and engineering. It has created unique development in various sectors of bio-research and upsurges the efficacy of research at the molecular level in recent years. Microfluidic technology makes it possible to manipulate sample volumes at the micro- and nano-level (called nanofluidics) with terrific control outside in vivo cellular microenvironment, enabling the reduction of discrepancies between in vivo and in vitro environments as well as reducing reaction time and cost. In this review, we discuss various effective integrations of microfluidic technologies into biotechnology and its paradigmatic significance in bio-research, supporting mechanical and chemical in vitro cellular micro-environment. Specific innovations relating to the application of microfluidics to advance microbial life, solitary and co-cultures along with a multiple-type cell culturing, cellular communications, cellular interactions and population dynamics are discussed.

In this paper, we propose a novel approach to recognize radar targets on inverse synthetic aperture radar (ISAR) and synthetic aperture radar (SAR) images. This approach is based on the multiple salient keypoint descriptors (MSKD) and multitask sparse representation based classification (MSRC). Thus, to characterize the targets in the radar images, we combine the scale-invariant feature transform (SIFT) and the saliency map. The goal of this combination is to reduce the SIFT keypoints and their time computing time by maintaining only those located in the target area (salient region). Then, we compute the feature vectors of the resulting salient SIFT keypoints (MSKD). This methodology is applied for both training and test images. The MSKD of the training images leads to construct the dictionary of a sparse convex optimization problem. To achieve the recognition, we adopt the MSRC taking into consideration each vector in the MSKD as a task. This classifier solves the sparse representation problem for each task over the dictionary and determines the class of the radar image according to all sparse reconstruction errors (residuals). The effectiveness of the proposed approach method has been demonstrated by a set of extensive empirical results on ISAR and SAR images databases. The results show the ability of our method to predict adequately the aircraft and the ground targets.

Continuous object tracking in WSNs, such as monitoring of mud-rock flows, forest fires etc., is a challenging task due to characteristic nature of continuous objects. They can appear randomly in the network field, move continuously, and can change in size and shape. Monitoring such objects in real-time generally require tremendous amount of messaging between sensor nodes to synergistically estimate object’s movement and track its location. In this paper, we propose a novel twofold-sink mechanism, comprising of a mobile and a static sink node. Both sink nodes gather information about boundary sensor nodes, which is then used to uniformly distribute energy consumption across all network nodes, thus helping in saving residual energy of network nodes. Numerous object tracking schemes, using mobile sink, have been proposed in the literature. However, existing schemes employing mobile sink cannot be applied to track continuous objects, because of momentous variation of network topology. Therefore, we present in this paper a mechanism, transformed from K-means algorithm, to find the best sensing location of the mobile sink node. It helps to reduce transmission load on the intermediate network nodes situated between static sink node and the ordinary network sensing nodes. The simulation results show that the proposed scheme can distinctly improve life time of the network, compared to one-sink protocol employed in continuous object tracking.

Conclusion: The study highlights the high prevalence of depression among caregivers of geriatric patients in Jeddah and underscores the significant impact of caregiving burden on mental health. These findings emphasize the need for targeted interventions, such as mental health support, respite care programs, and culturally sensitive educational training, to mitigate caregiver burden and enhance the well-being of caregivers.

The widespread adoption of IoT networks has revolutionized modern life thanks to their diverse range of applications. With their increased usage, the need to transfer data securely has never been more vital. Often IoT devices are battery-driven and possess limited processing and storage capabilities. In response to those limitations, there has been a shift towards the implementation of resource-efficient and lighter protocols. This research aims to evaluate how lightweight key establishment through Object Security for Constrained RESTful Environments (OSCORE) and Ephemeral Diffie-Hellman Over COSE (EDHOC) can enhance cybersecurity in IoT networks where resources are limited. The study aims to explore different key management approaches and the effects of certificates on security, efficiency, and power consumption. The research methodology consists of the practical implementation of the protocols in a physical system where factors such as the impact of hardware acceleration on computational overhead and overall power consumption will be assessed. Furthermore, the study will verify the cost of resources and overall efficiency, evaluating them against real-world scenarios. The expected contributions of this study are insights into the tradeoffs between security, power consumption, and efficiency in resource-limited IoT environments.

This research aimed to determine the most viable locations for establishing solar energy facilities in Yemen through the utilization of the Analytical Hierarchy Process (AHP), Best-Worst Method (BWM), and Geographic Information System (GIS). A total of twelve key criteria were meticulously selected and evaluated based on their impact on the appropriateness of sites for solar power plants. These criteria were amalgamated using a weighted overlay tool, resulting in a map that classified regions as either optimal, highly suitable, or suitable. The findings of the study indicated that the eastern, southern, and northern parts of Yemen are prime candidates for solar energy installations due to their moderate climate and flat topography. On the other hand, the western regions were deemed less favorable. The breakdown of site classifications revealed that 38% of areas were optimal, 61% were highly suitable, and only 1% were considered suitable, based on the assigned weights from the AHP and BWM methodologies. Moreover, a sensitivity analysis was carried out to evaluate the impact of adjusting the weights of Global Horizontal Irradiance (GHI) and slope on site classifications. A minor increase in the weights of GHI (from 30% to 31%) and slope (from 10% to 11%) resulted in a significant alteration in the suitability categories, highlighting the importance of weight adjustments in multi-criteria decision-making processes. In conclusion, the study emphasizes the effectiveness of AHP, BWM, and GIS in assessing site suitability for solar energy facilities, as well as the significance of sensitivity analyses. These approaches provide valuable insights for decision-makers, aiding in strategic planning and fostering sustainable energy development in Yemen.

This paper presents a customized adaptive cascaded deep learning (ACDL) model for the design and performance prediction of metasurface absorbers. A multi-resonant metasurface absorber structure is introduced, with 10 target-driven design parameters. The proposed deep learning model takes advantage of cascading several sub-deep neural network (DNN) layers with forward noise mitigation capability. The inherent appearance of sparse data is completely dealt with in this work by proposing a trained adaptive selection technique. On the basis of the findings, the prediction response is quite fast and accurate enough to retrieve the design parameters of the studied metasurface absorber and with two sized patches of 4000 and 7000 datasets. The training loss taken form the second DNN of our proposed model shows logarithmic mean squared errors of 0.039 and 0.033 when using Keras and the adaptive method, respectively, with a dataset split of 4000. On the contrary, for a dataset split of 7000, the errors are 0.049 with Keras and 0.045 with the adaptive method. On the other hand, the validation loss is evaluated using the mean square error method, which results in a loss with 4000 datasets split with the Keras method of 0.044, while it is 0.020 with the adaptive method. When extending the dataset to 7000, the validation loss with the keras splitting method is 0.0073, while it is improved, reaching 0.006 with the proposed adaptive method, and achieving a prediction accuracy of 94%. This proposed deep learning model can be deployed in the design process and synthesis of multi-resonant metasurface absorber structures. The proposed model shows its advantages of making the design process more efficient in sparse dataset handling, efficient approach in multi-resonance metasurface data pre-processing, less time consuming, and computationally valuable.

The automatic diagnosis of cardiovascular diseases has received much attention in the deep learning field. In this context, the segmentation of the left ventricle endocardium constitutes a major task in diagnosing heart conditions such as health failure and hypertrophic cardiomyopathy. The objective of this paper is to propose a "deep convolution network" for segmenting the internal cavity of the left ventricle (endocardium) using MRI images. In particular, we design an improved UNET model which handles additional inception modules for efficiently segmenting the internal cavity of the left ventricle. Our approach has been validated on the Sunnybrook Cardiac Data (SCD) dataset and has showed promising results in terms of precision. More specifically, the improved UNET largely outperforms the baseline UNET model and many existing state-of-the-art methods.

water resources in Morocco have been severely influenced by climate change (CC) and pro-longed drought, particularly, in the pre-Saharan zone. The Tafilalet region faces increasing pres-sure due to high demographic growth, increased demand for water, excessive groundwater con-sumption, and investment in agriculture. Using the Water Evaluation and Planning System (WEAP), this study assessed land cover and elevation and created future scenarios using the Standard Precipitation Index (SPI) and Standard Groundwater Level Index (SGI) to monitor hy-droclimate drought conditions in the Ziz watershed from 1989 to 2022. Results show decreasing precipitation, particularly from 2010-2020, with the last four years being the most challenging (SPI<-2). SPI and SGI have a high correlation, suggesting precipitation impacts groundwater in-dicators. Future scenarios predict a high risk of CC, with a 30% decrease in annual precipitation accumulation by 2100 under the optimistic scenario SSP126. Minimum temperature is expected to increase by 1.08°C (SSP126) and 2.61°C (SSP585), and maximum temperature by 1.05°C (SSP126) and 2.93°C (SSP585). Keywords: Climate Change, Water Resources, SPI, SGI, WEAP, Ziz watershed, Drought

This study investigates how Electronic Livestock Health Recording Systems (ELHRs) facilitates the detection of disease burden and make cluster analysis by applying data analytics tools and techniques. A sample size of 18333 livestock disease cases reported from 2007-2015 by the Ministry of Agriculture of the Federal Democratic of Ethiopia was used for data collection. The results showed that ELHRs are important as livestock disease data preservers, saving costs, and facilitating the extraction of up-to-date and complete information. Euclidean and Manhattan distance performed well at 98%, while cosine distance measurement metrics performed poorly. Finally, with the application of the selected clustering techniques, metrics, tools, and dataset, it has been attempted to successfully detect an optimal number of disease clusters and meet the objectives of the study.

Timely mitosis is critically important for the early embryo development. It is regulated by the activity of the ubiquitously conserved CDK1 kinase. The dynamics of CDK1 activation must be precisely controlled to assure physiologic and timely entry into mitosis. Recently, a known S-phase regulator CDC6 emerged as a key player in the mitotic CDK1 activation cascade in early embryonic divisions, operating together with Xic1 as a CDK1 inhibitor upstream of the Aurora A- and PLK1 kinases, both CDK1 activators. Herein we review the molecular mechanisms that underlie the control of the mitotic timing, with special emphasis on how CDC6/Xic1 function impacts CDK1 regulatory network. We focus on the presence of two independent mechanisms inhibiting the dynamics of CDK1 activation: Wee1/Myt1- and CDC6/Xic1-dependent, and how they cooperate with CDK1 activating mechanisms. As a result we propose a comprehensive model integrating CDC6/Xic1-dependent inhibition into the CDK1-activation cascade. The physiological dynamics of CDK1 activation appear to be tuned by the system of multiple inhibitors and activators and their integrated modulation ensures concomitantly both the robustness and certain flexibility of the control of this process. Identification of multiplied activators and inhibitors of CDK1 activation upon M-phase entry allows a better understanding of why cells divide at a specific time, and how the pathways involved in the timely regulation of the cell division are all integrated to precisely tune the control of mitotic events.

Background: The study describes the comparison of different microbial load results of natural falling and dipping of the house fly (Musca domestica) in water and milk to investigate the possibilities of preventing the effect of the transferred pathogens from the house fly to our sources by pointing out the existence of antimicrobial factors within the house fly. Methods: Samples of house fly were collected from Jeddah and Makkah (Makkah region) and were directly transferred to the laboratory. Each house fly was packed in sterile test tubes. Each tube was opened oppositely to a larger test tube containing 10 ml of sterile tap water, and sterile water at pH 4.0 in other similar series of treatments to represent the reactions of stomach fluids. Later, the house flies were left for 20 seconds after reaching the water surface, and then cultured on different microbial media to evaluate the microbial load of the natural falling of the house fly. To evaluate the complete dipping of house flies in the water, two methods were tested by one complete dip for the flies for 20 seconds, and three times complete dipping for 20 seconds in water before evaluating the microbial load. The same methods were achieved on milk in a series of experiments and the microbial load was evaluated after the incubation at room temperature for three hours. Results: It was found that dipping treatments of house flies gave lower microbial contamination in water at pH 4.0 than neutral pH. The lower microbial load was also observed when dipping the house flies three times in water as compared to once dipping and natural falling treatments. It was also found that the complete dipping of house flies’ treatments in milk will reduce the microbial contamination as compared to natural falling treatments. Conclusion: The observed results support the presence of antimicrobial factors on the house fly.

Phagnalon saxatile subsp. saxatileest une espèce sauvage très répandue en Algérie qui est utilisée à des fins médicinales comme analgésique et anticholestérolémique. Cependant, les informations sur son contenu phytochimique sont encore rares. L'objectif de cette étude était d'identifier et de quantifier les composés phénoliques de différents extraits de ses tiges feuillues. A cet effet, les effets de quatre solvants d'extraction ont été étudiés sur la teneur en composés phénoliques et l'activité antioxydante de cette plante. Les extraits préparés avec des solvants polaires (méthanol et eau) contenaient des quantités plus élevées de composés phénoliques et présentaient une meilleure activité antioxydante que les extraits avec des solvants apolaires (hexane, dichlorométhane). L'extrait méthanolique, le plus riche en phénoliques totaux et en flavonoïdes totaux, avait une activité antioxydante significative au regard de la capacité de piégeage du DPPH ° (IC50 de 5,47 µg / mL), Capacité de piégeage ABTS (CI50 de 63,77 µg / mL) et inhibition de l'oxydation de l'acide linoléique (CI50 de 22,71 µg / mL), par rapport aux antioxydants synthétiques. Les acides chlorogéniques et quelques flavonoïdes ont été identifiés et quantifiés par UPLC-DAD-MSn. Les isomères des acides di-O-caféoylquiniques étaient les composés phénoliques les plus concentrés (25,4 mg / g DW) dans l'extrait méthanolique.

Scholars in the field of environmental economics have extensively examined the relationship between foreign direct investment (FDI) and economic growth. However, they have often failed to consider the crucial roles played by technological innovation and financial development in determining environmental costs. The rapid economic growth and urbanization witnessed in BRICS countries have led to a substantial increase in energy demands, resulting in significant environmental degradation. This study aims to investigate the impact of financial development (including measures such as broad money, domestic credit to the private sector, FDI, and green technological innovation) on carbon emissions in BRICS countries using data from 2001 to 2023. The results of the study demonstrate a strong cross-sectional dependence among the countries in the panel. The Augmented Mean Group (AMG) estimator reveals a negative and statistically significant long-term relationship between broad money, FDI, green technological innovation, and CO2 emissions. On the other hand, domestic credit to the private sector shows a positive and significant association with carbon emissions. To determine the direction of causality, the study utilizes the Dumitrescu and Hurlin panel causality test. The findings indicate a non-directional long-term causality between financial development and CO2 emissions. However, a unidirectional causality is observed between green technological innovation and carbon emissions. Based on these findings, the study suggests that the development of industries, financial institutions, and technological innovation is crucial for attracting high-quality FDI in BRICS countries. However, it also highlights the significant contribution of these developments to environmental degradation, necessitating urgent policy responses.

The SARS-CoV-2 have caused a devastating pandemic of all times in the recent human history. However, there is a serious paucity in high quality data on aggravating factors and mechanisms of co-infection. This study aimed to identify the trending patterns of bacterial co-infections and types and associated outcomes in three phases of the pandemic. Using quality hospital data, we have investigated the SARS-CoV-2 fatality rates, profiles, and types of bacterial co-infections before, during, and after COVID-19 vaccinations. Out of 389 isolates used in different aspects, 298 was examined before and during the pandemic (n=149 before, n=149 during), death rates were 32% during compared to only 7.4% before pandemic with significant association (P value = 0.000000075). Death rate was 34% in co-infected (n = 170) compared to non-co-infected patients (n = 128) indicating a highly significant value (P value = 0.00000000000088). However, analysis of patients without other respiratory problems (n=28) indicated that among the remaining 270 patients, death was 30% in co-infected patients (n=150) and only 0.8% in non-coinfected (n=120) with high significant P value= 0.00000000076. The trending patterns of co-infections before, during, and after vaccinations showed a significant decline in Staphylococcus aureus with concomitant peaks in Gram-negatives in totals of (n= 149 before/n= 149 during): Klebsiella pneumonia (n = 11/49 before/during; E. coli n=10/24, A. baumannii n=8/25, and Ps. Aeruginosa n= 5/16, and S. aureus 13/1. Nevertheless, in post vaccination phase, (n= 91) gender-specific co-infections were examined for potential differences in susceptibility. Methicillin resistant S. aureus (MRSA) dominated both genders followed by E. coli in males and females with the latter gender showing higher rates of isolations in both species. Klebsiella pneumoniae declined to third place mostly in male patients. The drastic decline in K. pneumoniae and Gram-negatives post-vaccination strongly imply a potential co-protection in vaccines. Future analysis would gain more insights into molecular mimicry.

This research delves into the water hammer occurrences, in the transmission pipeline of the SMD (Manda Daba) Multi Village Water Supply Schemes in Afar, Ethiopia. It utilizes simulation software, Bentley HAMMER version 8i to assess transient flow issues and the effectiveness of protective measures. The study pinpoints high risk areas in Scenario 1 marked by pressure spikes, negative pressures and frequent cavitation highlighting the importance of efforts. Prior to safeguards significant pressures reaching 288.27 m H₂O and minimum pressures dropping as low as 9.98 m H₂O are observed. In Scenario 2 where protective measures are implemented notable enhancements are seen with pressures ranging from 121.38 m H₂O to 150.49 m H₂O improved safety levels and substantial reductions in minimum pressures at pump stations. Moreover the study delves into Scenario 3 which explores pipe materials and diameters to provide insights, for pipeline design standards. It emphasizes how protective measures effectively mitigate water hammer effects while also highlighting cost saving potential by incorporating 2000 liter hydro tanks at pump stations. This integration leads to decreased pipeline collapses and maintenance expenses underscoring the significance of addressing challenges pinpointing failure causes and offering solutions to enhance system performance and strengthen reliability within the SMD water supply system

In today’s data-driven marketing landscape, accurately predicting customer responses to marketing campaigns is critical for optimizing engagement and return on investment (ROI). This study utilizes a Decision Tree (DT) model to identify key factors influencing customer behaviour. Initially, the model achieved a high accuracy of 87.3% but struggled with precision and recall due to class imbalance. By applying a resampling technique, the model’s performance improved significantly, with a recall increase from 44% to 83.1% and an F1-score improvement from 49% to 74.2%. Key influential features identified include how recently a customer made a purchase, the number of days they have been a customer, and the number of previous campaigns they responded to. The study highlights the DT model’s interpretability, making it a practical tool for marketing professionals to improve campaign effectiveness and customer targeting.

This study builds on our previous Systematic Literature Review (SLR) that assessed the applications and performance of zk-SNARK, zk-STARK, and Bulletproof Non-Interactive Zero-Knowledge Proof (NIZKP) protocols. To address identified research gaps, we designed and implemented a benchmark comparing these three protocols using a dynamic MiMC hash application. We evaluated performance across four general-purpose programming libraries and two programming languages. Our results show that zk-SNARK produced the smallest proofs, while zk-STARK generated the largest. In terms of proof generation and verification times, zk-STARK was the fastest, and Bulletproof the slowest. Interestingly, zk-SNARK proofs verified marginally faster than zk-STARK, contrary to other findings. These insights enhance our understanding of the functionality, security, and performance of NIZKP protocols, providing valuable guidance for selecting the most suitable protocol for specific applications.

This paper proposes a new cascaded three-phase multilevel inverter based on a cascaded submultilevel and single-phase H-bridge structure. The voltage source of the traditional single-phase H-bridge is replaced with the proposed cascaded submultilevel. Cascading two basic units forms the submultilevel unit. The basic and submultilevel units generate positive voltage only hence the need for an H-bridge to generate both polarities of load voltage. Five algorithms of source voltage are proposed and the optimal algorithm selected to generate the peak load voltage and output levels. The proposed three-phase cascaded multilevel inverter generates 31-level of load voltage. The per-phase component distribution of the proffered inverter are twelve power switches, four dc sources and twelve driver circuits accordingly. Principal merits of the proposed 31-level inverter are high quality load waveforms, production of high levels of load voltage utilizing reduced component quantity, simple cascaded layout, decreased inverter area, minimal inverter cost, minimum inverter losses and utilizing lower rated switches. Also, the proposed topology is highly suited for employment in PV-DVR and other power systems. To validate these advantages of the proposed multilevel inverter, contrastive analysis of the proposed inverter and existing topologies are studied. Finally, the functionality of the proposed inverter is substantiated by simulation in PSCAD/ EMTDC software.

Artificial Intelligence (AI) play an important role in many fields, including medical education, practice, and research. Many medical educators started using ChatGPT at the end of 2022 for many purposes. The aim of this article was to explore the potential uses, benefits and risks of using ChatGPT in integrated pharmacotherapy of infectious disease module education. This study was an experimental study with content analysis of the potential applications of the ChatGPT model for integrated pharmacotherapy of infectious diseases module education was performed. The findings of this study shows that there are many potential uses, benefits and risks associated with the use ChatGPT. In conclusion, medical and health sciences educators can use ChatGPT as a guide in many aspects related to the integrated pharmacotherapy of infectious disease curriculum development, syllabus design, lecture notes preparation and exam preparation with caution.

Influential Observations, which are outliers in x direction, y direction or both, remain a hitch in classical regression model fitting. Spatial regression model, with peculiar nature of outliers due to their local nature, is not free from the effect of such influential observations. Researchers have adapted some classical regression techniques to the spatial models and yielded satisfactory results. However, masking or/and swamping remain stumbling block to such methods. We obtained the spatial representation of the classical regression measures of diagnostic in general spatial model. Commonly used diagnostic measure in spatial diagnostic, the Cook's distance, is compared to some robust methods, Hi2 (using robust and non-robust measures), and classification based on generalized residuals and diagnostic generalized potentials, ISRs-Posi and ESRs-Posi, with the help of the obtained spatial prediction residuals and the spatial leverage term. Results of simulation and applications to real data have shown the advantage of the ISRs-Posi and ESRs-Posi due to classification of outliers over Cook's distance and non-robust Hsi12, which suffer from masking, and robust Hsi22 which suffer from swamping in general spatial model.

As the number of Small and Medium Enterprises (SMEs) rises in the world, the amount of sensitive data used also increases, making them targets for cyberattacks. SMEs face a host of issues such as lack of resources, and poor cybersecurity talent, resulting in multiple vulnerabilities that increase overall risk. Cybersecurity risk assessment frameworks have been developed by multiple organizations such as the National Institute of Science and Technology (NIST) and the International Organization for Standardization (ISO), but they are complicated to understand, and challenging to implement. This research aimed to create an effective cybersecurity risk assessment framework specifically for SMEs while considering their limitations. This was achieved by first identifying common threats and vulnerabilities and categorizing them according to their importance, and risk. Secondly, popular frameworks like the NIST CSF and ISO 27001/2 were analyzed for their proficiencies and deficiencies while identifying relevant areas for SMEs. Finally, novel techniques catered to SMEs were explored and incorporated to create an effective framework for SMEs. This framework was also developed in the form of a tool, providing an interactive and dynamic environment. The tool was effective and the framework is a promising start but requires more quantitative analysis.

The persistent security challenges in Industry 4.0 due to resource-constrained IoT devices necessitate innovative solutions. Addressing this, a study introduces the ASCON algorithm for lightweight Authenticated Encryption with Associated Data, enhancing confidentiality, integrity, and authenticity within IoT limitations. By integrating Digital Twins, the framework emphasizes the need for robust security in Industry 4.0, with ASCON ensuring secure data transmission, bolstering system resilience against cyber threats. Practical validation using MQTT protocol confirms ASCON’s efficacy over AES-GCM, highlighting its potential for enhanced security in Industry 4.0. Future research should focus on optimizing ASCON for microprocessors and developing secure remote access tailored to resource-constrained devices, ensuring adaptability in the digital era

This study examines the role of using algorithmic HRM to make strategic decisions pertaining to HR activities in organizations. The study develops a scale to measure algorithmic HRM usage in its first phase, and in the second phase, it finds that algorithmic HRM having significant impact on the strategic HR decision making that helps and enables organization in creating the competitive advantage. Utilizing the author’s LinkedIn profile, 234 final participants considered for this research. Collected data analyzed by applying PLS SEM. It evaluates the mediation role of the HR strategic decision making, and the HR digital maturity as a moderator in seeing the impact of algorithmic HRM on the competitive advantage of the firm. The study finds a strong relationship between the algorithmic HRM usage and competitive advantage, a significant relationship between algorithmic HRM usage and the strategic HR decision making, and lastly, a significant relationship between strategic HR decision making and the competitive advantage. The moderating role of HR digital maturity was found to be insignificant in this research which paves the way for further research. This research, the model, and its findings contribute to the theory and implicate the practicality of algorithmic HRM. It's one of few papers that address the algorithmic HRM usage in the transitioning economy like Saudi Arabia.

We developed and experimented at sea an innovative fiber optic hydrophone (FOH) capable of operating at very low frequency of the seismic spectrum and for detecting small magnitude earthquakes. The FOH exploits an optical fiber coil wrapped around a sensitive mandrel in a Michelson interferometric configuration. The FOH operated for about seven days at a water depth of 40 m, in the Campi Flegrei volcanic area (Southern Italy), a few meters from a well calibrated PZT hydrophone used as a reference. Thirty-three local earthquakes occurred during the simultaneous operation of the two hydrophones, allowing a straightforward comparison of the recordings. The local earthquakes occurred at an epicentral distance shorter than 2.5 km from the site of recording, and were estimated to be in the range of magnitude from -0.8 to 2.7. The analysis of the recorded earthquake waveforms in the frequency and time domain allowed retrieving the response function of the FOH in the frequency range from 5 to 70 Hz. The FOH responsivity in terms of acoustic pressure reaches about 230 nm/Pa and is flat in the studied frequency range. The high quality of the FOH recordings make this equipment suitable for applications addressing submarine volcanic activity and the background seismicity of active faults in the ocean.

Centralized control algorithm limits the hardware flexibility of a Modular Multilevel Converter (MMC). Therefore, industrial MMC applications have started adopting distributed control structures. Even though distributed controller reduces a single point of failure risk compared to the centralized controller, the failure risk of the entire control systems increases due to the number of local controllers. However, the distributed controller can be programmed in such a way as to bypass the faulty local controller and take care of the power modules with the adjacent local controllers. This paper implements a modular distributed fault-tolerant controller for a scaled laboratory MMC prototype. Experimental results show that an MMC can operate without interruption, even under two local controller failures. Besides, the experimental results are verified with the Opal-RT, a real-time simulator with the same controller in a Control Hardware in Loop (CHIL) environment.

To increase the network computer and mobile telephone capacity one needs a laser to carry information instead of electrons. Since the laser is very fast compared to electrons, one expects information to be transmitted very fast through the network (internet). This requires searching for chips that act as capacitors, inductors, or evens as resistors this work shows that the laser traveling beam diminished as the frequency reciprocal thus acts as a capacitor or diminished as frequency thus acts as an inductor and sometimes diminished with the concentration of carriers thus act as a resistor for magnetic materials with strength that cancels the friction force when the laser frequency is equal nearly to the atoms natural frequency the material act as an inductor. Then frictional force is dominant with high mobility dielectric, the material acts as a capacitor. However, it acts as a conductor for negligible friction and natural frequency.

Background: The fascial system provides an environment that enables all body systems to operate in an integrated manner and is capable of modifying its tensional state in response to the stress applied to it. Recent in vitro, animal and cadaveric studies have shown that “myofascial force transfer” (MFT) has the potential to play a major role in musculoskeletal function and dysfunction.Objective: Human evidence for the existence of invivo MFT is scarce. This scoping review attempts to gather and analyse the available evidence of the in-vivo human MFT studies in order to sustain and facilitate further research and evidence based practice in this field.Methods: A search of most major databases was conducted with relevant keywords that yielded 238 articles as of August 2020. A qualitative analysis of the studies was conducted after rating it with Oxford’s Center for Evidence –based Medicine (CEBM) scale.Result: Nineteen studies ranging from randomized controlled trials to case studies covering 540 patients were included in this review. The analysed studies were highly heterogeneous and of lower methodological quality meddling with the quantitative analysis. Ten studies are confirming a ‘most likely’ existence of MFT, eight studies confirming it as ‘likely’ and one study couldn’t confirm any MFT existence in this review.Conclusion: Findings from in vivo human studies supports the animal and cadaveric studies claiming the existence of MFT which need to be corroborated by the future high quality studies. Forthcoming studies on MFT may give answers and solutions to many of the human musculoskeletal mysteries or dysfunctions.

Few switching transitions in high power and medium voltage application of Power converters are desirable. The selective harmonics elimination (SHE) pulse width modulation offers a better quality waveform with lower switching transitions and hence lower switching losses. The SHE is a pre-programmed modulation technique where certain amounts of lower order harmonics are removed and fundamental voltage is controlled. After Fourier analysis of output waveform, a set of nonlinear transcendental equations is obtained which exhibits, multiple, unique or no solution in different range of modulation index (MI). In this paper, an iterative method based on the Jacobian estimate is proposed to solve a highly non-linear set of SHE equations. The proposed technique is easy in implementation and can solve a large number of such equations as computation of the Jacobian matrix in the subsequent iteration is estimated from the previous values. Moreover, the proposed method also removes the singularity problem, especially for large SHE equations. High accuracy in the initial guess is also not essential for this method and can converge to the solution with any random initial guess. The computational and simulation results are given to validate the concept. The hardware result is provided to confirm the computational and simulation results.

Sleep deprivation (failure to get enough sleep) is a public health issue that can negatively impact our body including cognitive function. Many studies have been done in Saudi Arabia to evaluate the impact of poor sleep and academic performance but almost all of them were done at university level. To investigate the relationship between sleep quality and general degree of academic achievement in school students. This is a cross-sectional, school-based study, conducted at Jazan Region, Saudi Arabia. A total of 957 participants (615 male and 342 female) were recruited from a state school. The study used a standardized, confidential, validated self-administered questionnaire to assess sleep quality and habits. By using Statistical Package for Social Studies (SPSS 22), achievement of the students was significantly related to the following parameters; laziness and fatigue after wake-up time and during school time, lack of concentration during school time, difficulty in complete tasks during school time and inability to maintain wakefulness during school time. Furthermore, students with poor academic degrees reported more significant incidence of sleeping at school, excessive daytime sleepiness, and other sleep related disorder than good academic degrees. Students with poor sleep quality have lower school grades.

Antibiotic resistance of cyanobacteria has been a global threat to public health. The widespread presence of cyanobacteria in aquatic environments exposes them to antibiotic contamination. The cyanobacteria are also in direct contact with pathogenic bacteria containing Antibiotic-Resistance Genes (ARGs) that gives them these characteristics. The study aims to the presence of some ARGs in locally isolated cyanobacteria species, Spirulina laxa, Chroococcus minutes, Oscillatoria princeps, Oscillatoria proteus, Oscillatoria terebriformis, Lyngbya epiphytica, and to compare the presence of these genes in two pathogenic bacteria, Escherichia coli and Klebsiella pneumoniae. The results revealed the presence of The ampicillin (Ap) and erythromycin (Em) resistance genes were detected in five algal samples. Meanwhile, the chloramphenicol (Cm) and gentamicin (Gm) resistance genes were apparent in only two species. Genes encoding resistance towards kanamycin (Km) and spectinomycin (Sp) were recorded in three specimens. The results also documented that E. coli possessed the resistance genes for four antibiotics: Ampicillin (Ap), Erythromycin (Em), Gentamicin (Gm), and Kanamycin (Km), whereas K. pneumoniae was resistant towards three anti-biotics: Ampicillin (Ap), Gentamicin (Gm), and Kanamycin (Km). The results show that there are a match in antibiotic resistance genes in both cyanobacteria and pathogenic bacteria. suggesting the possibility that cyanobacteria could acquire ARGs from the environment through horizontal gene transfer. Thus, freshwater cyanobacteria may play an important role in the prevalence of ARGs in their environment.

Few prior works study self-driving cars by deep learning with IoT collaboration. SDC-Net, which is an end-to-end multitask self-driving car camera cocoon IoT-based system, is one of the research that tackles this direction. However, by design SDC-Net is not able to identify the accident locations, it only classifies if it is a crash scene or not. In this work, we introduce an enhanced design for the SDC-Net system by 1) replacing the classification network with a detection one, 2) adapting our benchmark dataset labels built on the CARLA simulator to include the vehicles bounding boxes while keeping the same training, validation, and testing samples, 3) modifying the shared information via IoT to include the accident location. We keep the same path planning and automatic emergency braking network, the digital automation platform, and the input representations to formulate the comparative study. SDC-Net++ system is proposed to 1) output the relevant control actions, especially in case of accidents: accelerate, decelerate, maneuver, and brake, and 2) share the most critical information to the connected vehicles via IoT, especially the accident locations. A comparative study is also conducted between SDC-Net and SDC-Net++ with the same input representations: front camera only, panorama and bird-eye views, and with single-task networks: crash avoidance only, and multitask networks. Multitask network with a BEV input representation outperforms the nearest representation in precision, recall, f1-score, and accuracy by more than 15.134%, 12.046%, 13.593%, and 5%, respectively. SDC-Net++ multitask network with BEV outperforms SDC-Net multitask with BEV in precision, recall, f1-score, accuracy, and average MSE by more than 2.201%, 2.8%, 2.505%, 2%, and 18.677% respectively.

Human Ribonuclease (RNase) 6 is a monocyte and macrophage-derived protein with potent an-timicrobial activity toward uropathogenic bacteria. The RNASE6 gene is heterogeneous in hu-mans due to the presence of single nucleotide polymorphisms (SNPs). RNASE6 rs1045922 is the most common non-synonymous SNP, resulting in a G to A substitution that determines an ar-ginine (R) to glutamine (Q) transversion at position 66 in the protein sequence. By structural analysis we observed that R66Q substitution significantly reduces the positive electrostatic charge at the protein surface. Here, we generated both recombinant RNase 6 -R66 and -Q66 protein variants and determined their antimicrobial activity toward uropathogenic Escherichia coli (UPEC), the most common cause of UTI. We found that the R66 variant, encoded by the major SNP rs1045922 allele, exhibited superior bactericidal activity in comparison to the Q66 variant. The higher bactericidal activity of R66 variant correlated with an increase in the protein lipopolysac-charide binding and bacterial agglutination abilities, while retaining the same enzymatic effi-ciency. These findings encourage further work to evaluate RNASE6 SNP distribution and its impact in UTI susceptibility.

Salinity is a significant abiotic stress factor for ornamental plants cultivated in greenhouses, as they are supplied with fertilizers over a long period of time. It causes drastic yield losses in com-mercially important ornamentals such as Gerbera jamesonii, whose cut flowers rank fifth in the global flower trade. In the current study, pretreatment of G. jamesonii plants (white and yellow flowering varieties) with optimum concentrations of thiourea (1.0 mM, 5.0 mM & 10.0 mM) in-duced plant salt-tolerance. Gerberas pretreated with thiourea (5.0 mM), when exposed to NaCl (200mM), showed no signs of plant stress or phenotypic abnormalities, as seen in gerberas ex-posed to NaCl without thiourea pretreatment. Moreover, thiourea application significantly pro-moted plant growth as evidenced by increases in fresh and dry leaf weight, relative water con-tent, total protein content, free proline content, and chlorophyll. A decrease in H2O2 and MDA content and an increase in antioxidant enzymes superoxide dismutase, catalase, ascorbate perox-idase, glutathione reductase, and peroxidase activity indicate minimal cellular damage in gerberas treated with thiourea. Thus, spraying leaves with thiourea (5.0 mM) could help gerbera plants overcome the deleterious effects of salt stress during repeated fertilization in nethouses. In addi-tion to alleviating salt stress, thiourea can also be used as a biofertilizer. This could also be ex-tended to other ornamental species to promote sustainable development of the floriculture indus-try.

Cut flowers of Gerbera jamesonii, renowned globally for their vibrant colors and extended shelf life, play a pivotal role in the flourishing floriculture industry. However, repeated fertigation in nethouses/polyhouses poses a significant challenge leading to production losses. In response to this challenge, we hypothesized that the application of Ascorbic acid (AsA), an antioxidant, in optimal concentrations could alleviate the detrimental effects of salt toxicity and enhance Gerbera production. Our objective was to investigate the impact of exogenous AsA (1.0 mM, 2.0 mM, and 4.0 mM) as a foliar spray, followed by NaCl (200 mM) treatment, across two cultivars of Gerbera: white-flowered (salt sensitive) and yellow flowered (salt tolerant) cultivars. The research employed a comprehensive approach, applying AsA and NaCl treatment to evaluate their effects on chlorophyll, proline, and total soluble protein content, MDA, H2O2, and antioxidant enzyme activities (SOD, CAT, APX, GR, and POD). Following exposure to 2.0 mM AsA, treated plants displayed a notable increase in chlorophyll, Proline, and soluble protein content. Concurrently, MDA and H2O2 levels, indicator of intracellular damage, exhibited a decrement, suggesting AsA's protective role against salt stress. Moreover, enhanced antioxidant Enzyme activities were observed. The application of AsA (2.0 mM) not only induced salt tolerance in Gerbera but also showed potential benefits for its overall growth and development. This study underscores the promising role of AsA in mitigating salt-induced challenges in Gerbera cultivation.

A series of novel substituted isoxazolidine derivatives was synthesized through 1,3-dipolar cycloaddition reactions of α-aryl-N-methyl nitrones with various ethylene moieties, resulting in the formation of isoxazolidine derivatives. The structures of the synthesized compounds were characterized using spectroscopic methods. The [3+2] cycloaddition (32CA) reactions of α-aryl-N-methyl nitrones with diverse ethylene substituents were computed employing Density Functional Theory (DFT) at the B3LYP/6–31G(d) level, upgrading bond parameters. An investigation of the electron localization function (ELF) unveiled the zwitterionic nature of α-aryl-N-methyl nitrones, devoid of pseudoradical or carbenoid centers. Utilization of CDFT indices enabled the prediction of global electronic flux from the strongly nucleophilic α-aryl-N-methyl nitrones to the varied electrophilic ethylene functionalities. Molecular docking and molecular dynamics simulations were conducted on the isoxazolidine derivatives against the EGFR receptor (PDB: 4ZAU). In silico assessment of the synthesized isoxazolidines involved molecular docking, wherein the compound with the highest docking score was subjected to molecular dynamics simulations. Compound 11a, out of the thirty isoxazolidine derivatives, displayed the most substantial binding energy, yielding a g score of -6.57 kcal/mol. These observations highlighted the functional role of amide NH2 and NO2 in the binding process with the target protein, influencing its activity. Furthermore, prediction of ADME drug-likeness properties was performed to identify a suitable candidate.

Device-to-device (D2D) communication is a promising paradigm for the fifth generation 2 (5G) and beyond 5G (B5G) networks. Although D2D communication provides several benefits, 3 including limited interference, energy efficiency, reduced delay, and network overhead, it faces a lot 4 of technical challenges such as network architecture, and neighbor discovery, etc. The complexity 5 of configuring D2D links and managing their interference, especially when using millimeter-wave 6 (mmWave), inspire researchers to leverage different machine-learning (ML) techniques to address 7 these problems towards boosting the performance of D2D networks. In this paper, a comprehensive 8 survey about recent research activities on D2D networks will be explored with putting more 9 emphasis on utilizing mmWave and ML methods. After exploring existing D2D research directions 10 accompanied with their existing conventional solutions, we will show how different ML techniques 11 can be applied to enhance the D2D networks performance over using conventional ways. Then, still 12 open research directions in ML applications on D2D networks will be investigated including their 13 essential needs. A case study of applying multi-armed bandit (MAB) as an efficient online ML tool 14 to enhance the performance of neighbor discovery and selection (NDS) in mmWave D2D networks 15 will be presented. This case study will put emphasis on the high potency of using ML solutions 16 over using the conventional non-ML based methods for highly improving the average throughput 17 performance of mmWave NDS.

Tooth bud removal called Ibyinyo is the practice of removing the developing tooth buds, usually done on an infant, typically performed by traditional healers who believe that this practice will reduce fever and diarrhea in children. This practice is most prevalent in East-African countries, including Rwanda. These procedures are mostly performed in non-sterile conditions using basic sharp instruments. We will discuss the case of a 10-year-old female patient who was presented at the dental clinic, with two malformed permanent canine teeth. Clinical examination revealed malformed enamel and elongated permanent right maxillary canine tooth left mandibular canine tooth with crown malformation. She was also presented with retained (primary) left maxillary lateral incisor tooth and missing left maxillary canine tooth. In addition, the ectopic eruption of left maxillary central incisor tooth and missing permanent right mandibular canine tooth were noted. All these complications resulted from tooth bud removal that the patient had experienced in her early childhood. Her malformed right maxillary and left lower mandibular canine teeth were reshaped, using composite filling materials, to improve her appearance aesthetically. Ibyinyo is preventable damage, done out of ignorance and superstitious practices that can be stopped by growing social awareness. Therefore, educating parents through community-based campaigns on the detrimental consequences of early childhood tooth bud removal through Ibyinyo practice might be helpful to eradicate this harmful and unnecessary practice.

The main objective was to determine the effect of mobile phone radiation on general health and electrolytes among students who use mobile phones. A questionnaire was designed and applied to 103 healthy and 36 deaf female students to select cases that meeting the inclusion criteria. For assessment of salivary parameters, the participants were classified into three groups. Group I was the control group, which included 17 deaf students. Group II was healthy students who have mobile phone for less than 5 years. Group III was healthy students who have mobile phone for 5 years or more. The results showed that the participants who use mobile phone had several problems in their health including dry mouth, bad odor from mouth, drooling of saliva, as well as ear and eye pain. The participants who use mobile phone complained of headache, anxiety and forgetfulness as compared to deaf participants. The study showed that there was no significant difference between pH and flow rate of saliva in all tested groups. This study has also shown that salivary level of Na+ and K+ were significantly lower in mobile phone users when compared to non users of mobile phone.

Capsule endoscopy, which uses a wireless camera to take images of the digestive tract, is emerging as an alternative to traditional colonoscopy. The diagnostic values of these images depend on the quality of revealed underlying tissue surfaces. In this paper, we consider the problem of enhancing the visibility of detail and shadowed tissue surfaces for capsule endoscopy images. Using concentric circles at each pixel for random walks combined with stochastic sampling, the proposed method enhances the details of vessel and tissue surfaces. The framework decomposes the image into two detail layers that contain shadowed tissue surfaces and detail features. The target pixel value is recalculated for the smooth layer using similarity of the target pixel to neighboring pixels by weighting against the total gradient variation and intensity differences. In order to evaluate the diagnostic image quality of the proposed method, we used clinical subjective evaluation with a rank order on selected KID image database and compared to state of the art enhancement methods. The result showed that the proposed method provides a better result in terms of diagnostic image quality and objective quality contrast metrics and structural similarity index.

Hyper-spectral imaging provides the possibility of describing specific characteristics of materials in air, land and water depending on reflections of each material in a specific zone of the electromagnetic spectrum. Hyper-spectral sensors capture images in continuous and narrow spectral bands in the visible, near-infrared, and mid-infrared spectral regions. These sensors look at objects using a large part of the electromagnetic spectrum. Some objects have unique characteristics in certain electromagnetic spectrums. These spectral signatures, known as "spectral signatures," help to identify materials in images. But the main problem with these sensors is that the images they get in bad weather conditions and in the presence of dust or rain or snow are of very poor quality. Therefore, we go to SAR images, which are able to form a high-resolution image even in bad weather conditions. The method proposed in this paper is to obtain the final elements of hyper-spectral images using the decomposition method into a multilayer negative matrix. The reason for using this method is that, unlike the high-spectral images that form the image in a number of high-traffic zones, we can create the image in 8 different frequencies, so the most important thing is to get all the hidden information at those frequencies. And also, we compare between the RDA, SENMAV, OMP, ISMA and ADMM algorithms.

Many historical areas are exposed to many problems and ongoing changes that may negatively affect those areas. One of these historical areas is Historic Jeddah in Saudi Arabia, which was placed on the UNESCO World Heritage List in 2014. This site is located within the scope of the second largest city in the Kingdom, which is witnessing a continuous urban movement in which the image of the city is changing in response to (Kingdom’s Vision 2030) to modernize the image of its major cities. The study aims to review the urban preservation strategies for historic Jeddah and the vision set for it through the ongoing modernization process of the city, especially with the projects that have been undertaken in it since 2021. The study follows both theoretical and descriptive approaches with the aim of reviewing current conservation strategies. This is with the aim of reaching results related to the challenges facing the area, demonstrating the effectiveness of the conservation strategies used, and deducing what could contribute in the future to the process of developing, preserving, and optimally exploiting it, without losing its value as a result of the modernization processes taking place now, but rather as a compatible part of it.

Digital Image Correlation (DIC) is an optical technique used to measure surface displacements and strains in materials and structures. This technique has demonstrated significant utility in structural examination and monitoring. This manuscript offers a comprehensive review of contemporary research and applications that have leveraged the DIC technique in laboratory-based structural tests. The reviewed works encompass a broad spectrum of structural components, such as concrete beams, columns, pillars, masonry walls, infills, composite materials, structural joints, steel beams, slabs, and other structural elements. These investigations have underscored the efficacy of DIC as a metrological instrument for precise quantification of surface deformation and strain in these structural components. Moreover, the constraints of the DIC technique have been highlighted, especially in scenarios involving extensive or complex test configurations. Notwithstanding these constraints, the DIC methodology has validated its effectiveness as a strain measurement instrument, offering numerous benefits such as non-invasive operation, full-field measurement capability, high precision, real-time surveillance, and compatibility with integration into other measurement instruments and methodologies.

Outbreaks of the desert locust Schistocerca gregaria affect some of the poorest parts of Africa, causing devastating catastrophes. Key to understanding and dealing with this problematic adaptation to environmental changes is comparing locusts that are gregarious (associated with outbreak states) and solitarious (associated with non-outbreak states) either in nature or after experimental treatments in laboratories. Categorising locusts and detecting changes in their phase status is key to such comparisons. Such comparisons are hitherto based on applying mathematical models that use behavioural parameters and that each laboratory has to build a new for each experiment. All such models used thus far for research on locusts are different from each other. That implies differences in the tools used for the different experiments and by the different laboratories and, thus, potential noise in the scientific results and interpretations too. Standardizing the way how we categorise locusts between laboratories and experiments is needed if we want to reduce noise and errors. It is even a must if we are to make the results and interpretations transferable and comparable between experiments and laboratories that work in such an important research area. Here, we use samples from independent S. gregaria population in order to further test the two models that were suggested earlier as standardizing tools for S. gregaria categorization. The outcomes of both models were largely replicated and reproducible. We report on how successful the two models were at categorizing solitarious, intermediate (transient) and gregarious nymph and adult samples. We highlight shortcomings and make more specific recommendations on the use of these models based on the differences they show as to their precision when categorizing the solitarious and gregarious S. gregaria nymph and adult samples.

This work aims to explore the impact of side loads, drill-pipe tool-joint (DP-TJ) speed (RPM), and mud type on the austenitic stainless steel SM2535-110 casing wear characteristics. Actual field drill pipe tool joints, casings, and drilling muds are used in this study. The results of the study show that under both types of lubrication, the wear volume increased with radial load and DP-TJ speed. SM2535-110 casing specimens tested under oil-based mud (OBM) lubrication had higher casing wear volumes than those obtained under water-based mud (WBM) lubrication. This unexpected behavior is mainly due to the increase in the surface hardness of the casing specimens tested under WBM. The results also show that the specific wear factor (K) values of specimens tested under WBM are in general 2 to 4 times higher than those obtained under OBM. While K values under WBM increase with both the side load and RPM, those under OBM show a sharp decrease with RPM. This behavior under OBM is due to this lubricant’s higher viscosity and the change of lubrication regime from thin film to thick film lubrication at higher RPM. Scanning electron microscopy (SEM) and the digital microscopic imaging (DMI) of SM235-110 casing specimens show that an aggressive combination of adhesive, abrasive, and plastic deformation was observed under WBM, while the dominant wear mechanism under OBM is abrasive wear.

This paper focuses on designing and assessing Pumped Hydroelectric Energy Storage Systems (PHES), connected to the grid and PV system for self-consumption structured at Mutah university in an area of high solar potential. In focusing on PHES and PV literature was made to have data on the field, based on the grid code needed in Jordan. Next, a prospection to find the proper location for the installation was done. Afterward, a load profile was inserted to know the energy demand of the university. Then The productivity of the solar power plant of Mutah University was included. Finally, MATLAB software was used to realize the amount of energy to be stored, this data was used to implement the system which was chosen and sized. PHES layout was created to find the most accurate values for parameters to optimize the system performance, and to investigate the loss analysis. The system attains 9230.89 MWh/year. An annual load yields 4430 MWh/year, which covers the Mutah university demand with an estimated saving of 2039773 JD.

Nanocomposite hydrogels offer remarkable potential for applications in bone tissue engineering. They are synthesized through the chemical or physical crosslinking of polymers and nanomaterials, allowing for the enhancement of their behaviour by modifying the properties and compositions of the nanomaterials involved. However, their mechanical properties require further enhancement to meet the demands of bone tissue engineering. Here, we present an approach to improve the mechanical properties of nanocomposite hydrogels by incorporating polymer grafted silica nanoparticles into a double network inspired hydrogel (gSNP Gels). The gSNP Gels were synthesised via a graft polymerization process using a redox initiator. gSNP Gels were formed by grafting 2-acrylamido-2-methylpropanesulfonic acid (AMPS) as the first network gel followed by a sequential second network acrylamide (AAm) onto amine functionalized silica nanoparticles (ASNPs). We utilized glucose oxidase (GOx), to create an oxygen-free atmosphere during polymerization resulting in higher polymer conversion compared to argon degassing. The gSNP Gels showed excellent compressive strengths of 13.9 ± 5.5 MPa, a strain of 69.6 ± 6.4%, and a water content of 63.4% ± 1.8. The synthesis technique demonstrates a promising approach to enhance the mechanical properties of hydrogels, which can have significant implications for bone tissue engineering and other soft tissue applications.

Corneal opacity is a leading cause of vision impairment and suffering worldwide. Transplantation can effectively restore vision and reduce chronic discomfort. However, there is a considerable shortage of viable corneal graft tissues. Tissue engineering may address this issue by advancing xeno- keratoplasty as a viable alternative to conventional keratoplasty. In particular, livestock decellularization strategies offer the potential to generate bioartificial ocular prosthetics in sufficient supply to match existing and projected needs. To this end, we have examined the best practices and characterizations that have supported the current state-of-the-art driving preclinical and clinical applications. Identifying the challenges that delimit activities to supplement the donor corneal pool derived from acellular scaffolds allowed us to hypothesize a model for keratoprosthesis applications derived from livestock combining 3D printing and decellularization.

Pratylenchus loosi is an important root-lesion nematode that cause damage to tea plantations in Iran and all over the world. The present study reports on the characterization and evolution of three ß-1,4-engoglucanase genes Pl-eng-2, Pl-eng-3 and Pl-eng-4. The gene structure of Pl-eng-2 was fully determined with the predicted signal peptide and devoid of the linker domain and carbohydrate-binding domain, while Pl-eng-3 and Pl-eng-4 were only partially sequenced. The transcription of Pl-eng-2 was localized in the secretory esophageal glands of all life stages, but it was upregulated in male and females stages. Exon/intron structures of Pl-eng-2, Pl-eng-3 and Pl-eng-4 confirmed that they resulted from gene duplication followed by sequence and gene structure diversification with loss of linker domain and carbohydrate-binding domain during evolution. Phylogenetic analysis further confirmed that nematode endoglucanases resulted from horizontal gene transfer of a bacterial gene as Pl-eng-3 showed sister relationships with CelB cellulase of Bacillus subtilis. Silencing Pl-eng-2 by in vitro RNA interference, produced a 60% decrease of the transcript level. The reproductive ability of silenced P. loosi showed a 35% reduction of eggs and larval stages compared to untreated nematodes suggesting that this gene is involved in the early steps of invasion.

Hybrid inorganic-polymer nanocomposites can be employed in diverse applications due to the potential combination of desired properties from both the organic and inorganic components. The use of novel bottom-up in situ synthesis methods for the fabrication of these nanocomposites is advantageous compared to top-down ex situ mixing methods, as it offers increased control over the structure and properties of the material. In this review, the focus will be on the application of the sol-gel process for the synthesis of inorganic oxide nanoparticles in epoxy and polysiloxane matrices. The effect of the synthesis conditions and the reactants used on the inorganic structures formed, the interactions between the polymer chains and the inorganic nanoparticles, and the resulting properties of the nanocomposites are appraised from several studies over the last two decades. Lastly, alternative in situ techniques and the applications of various polymer-inorganic oxide nanocomposites are briefly discussed.

Ziziphus spina-christi commonly known as Christ’s thorn Jujube from the family (Rhamnaceae). The leaves are applied as Bandaged for wounds and are helpful in liver diseases, asthma and fever, it was found to have antimicrobial activity against different organisms. The aim of this study is to assess anti-microbial activity of leaves extract of Z. spina-christi and compare biological activity of the plant. spina-christi dry leave was extracted with 95% methanol and fractionated with Petroleum ether, Chloroform, Ethyl acetate and aqueous extract. Antimicrobial activity of the plant extract was tested against E. coli, S. para typhi B and C. albicans. Literature of the antimicrobial activity of the plant were collected and analyzed.Antimicrobial activity of Z. spina-christi leaves extracts showed negative result on fungal species C. albicans. Negative results were observed with bacteria Salmonella para typhi B and aqueous extract formed slight inhibition zone with E. coli. Result obtained was in contrast with that reported in the literature this is might be due to the different environmental condition affecting plant material.Z.spina-christi was found to have anti-bacterial effect Further studies are needed to assess its clinical safety and biological effect in vivo inside animals and human.

Seafood, especially from the ocean, is now seen as a greener and more sustainable source of protein causing an increase in its demand. This has also led to people making choices towards seafood as a replacement of carbon intensive protein sources. As a result, the demand for seafood is growing, and the Aquaculture industry is required to increase their produce while keeping the produce safe and sustainable. There are many challenges faced by the aquaculture industry in meeting these increased demands. One such challenge is the presence of harmful algal blooms (HAB) in the ocean which can have a major impact on aquatic life. In this paper we look at the impact of this challenge on aquaculture and the mitigating strategies. We will focus on Abagold Limited, a land-based marine aquaculture business that specializes in large scale production of abalone (Haliotis midae) based in Hermanus, South Africa. HABs are considered a threat to commercial scale abalone farming along the South-African coastline and requires continuous monitoring. The most recent HAB was in February-April 2019, the area experienced a severe red-tide event with blooms of predominantly Lingulodinium polyedrum. We present some of the mitigation strategies employing digital technologies for future proofing the industry.

The utilization of solar energy technology is crucial for generating hydrogen in sustainable energy systems. While traditional methods involving natural gas, coal, and oil have been employed for hydrogen production, this study aims to explore environmentally friendly techniques. Green hy-drogen, despite being a more expensive option compared to fossil fuel-derived hydrogen, has prompted engineers to develop affordable and low-carbon technologies. The microgrid model was developed to showcase a self-contained DC islanded system designed to supply power to an electrolyzer, capitalizing on both a solar array and an energy storage unit. This comprehensive model offers a versatile platform for evaluating the operational dynamics involved in the sustainable production of green hydrogen. Over a span of seven days, it permits the as-sessment of hydrogen generation characteristics through the utilization of solar energy, either di-rectly from a solar array or through an integrated system that incorporates energy storage. The model encompasses a multi-domain framework, encompassing electrical, thermal liquid, and thermal gas aspects, facilitating a holistic exploration of the intricate processes underlying the green hydrogen production system. Through this simulation, the feasibility and efficiency of harnessing renewable energy sources for hydrogen production in an off-grid setting can be comprehensively examined and optimized, contributing to the advancement of sustainable energy solutions.

The laser sintering process and modification of electrophoretic deposition (EPD) YSZ coatings on YSZ air plasma sprayed thermal barrier coatings (TBCs) were investigated. Ni-based superalloy was plasma sprayed using yttria-stabilized zirconia (YSZ) to perform thermal barrier coating with 400 μm thickness. The electrophoretic deposition (EPD) technique was used for depositing nanopowder of YSZ on the surface of YSZ TBCs. In this study, a technology of direct sintering the green EPD layer by laser beam was carried out. The best conditions of deposition YSZ overlay coating using DC current were obtained with applied voltage 40 V, deposition time 5 min, and suspension concentration 10 g/l. Iodine was added to the solutions as the stabilizing agent. To overcome the disadvantages of high sintering temperatures, laser sintering was taken as a new approach. Microstructures for all specimens were studied using Field Emission Scanning Electron Microscopy (FESEM) with EDS analysis. Surface roughness was investigated using AFM analysis and central line average (CLA). The results indicated that the morphology after the direct laser sintering of the EPD layer has a fine and controllable grain size, high hardness, and low roughness. Which is better than the direct laser on plasma-sprayed coatings.

In recent years, underwater exploration for deep-sea resource utilization and development has a considerable interest. In an underwater environment, the obtained images and videos undergo several types of quality degradation resulting from light absorption and scattering, low contrast, color deviation, blurred details, and nonuniform illumination. Therefore, the restoration and enhancement of degraded images and videos are critical. Numerous techniques of image processing, pattern recognition and computer vision have been proposed for image restoration and enhancement, but many challenges remain. This survey presents a comparison of the most prominent approaches in underwater image processing and analysis. It also discusses an overview of the underwater environment with a broad classification into enhancement and restoration techniques and introduces the main underwater image degradation reasons in addition to the underwater image model. The existing underwater image analysis techniques, methods, datasets, and evaluation metrics are presented in detail. Furthermore, the existing limitations are analyzed, which are classified into image-related and environment-related categories. In addition, the performance is validated on images from the UIEB dataset for qualitative, quantitative, and computational time assessment. Areas in which underwater images have recently been applied are briefly discussed. Finally, recommendations for future research are provided and the conclusion is presented.

Tetanus toxoid (TT) vaccination during pregnancy has been proven as an effective preven-tive measure to reduce the incidence of maternal and neonatal morbidity and mortality worldwide. This study aimed to assess the determinants of TT vaccine uptake among pregnant women in two public maternity specialized hospitals in Sudan. A hospi-tal-based cross-sectional study was conducted in two public hospitals, Omdurman Ma-ternity and AL-Saudi hospitals in Omdurman, Khartoum State in Sudan, from February to April 2020. Logistic regression analysis was carried out to identify factors associated with receiving three or more doses of TT vaccine among pregnant women (protected against tetanus), presented as Odds ratios, with p-values <0.05 considered significant (at 95% confidence interval). The study recruited 350 pregnant women, with 313 participants in-cluded in the analysis. This study found that only 40% of the pregnant women received 3 doses or more (protected) of TT vaccine during their current pregnancy. Pregnant women who attended Al Saudi hospital were less likely to be protected against Tetanus (received ≥ 3 doses) compared to those who attended Omdurman hospital [OR= 0.49 (95%C.I 0.29-0.82), p-value <0.05]. Furthermore, the number of children at home was a significant predictor of mothers’ immunization status as those with five children or more were ten times more to be protected against tetanus [OR= 10.54 (95% C.I 4.30-25.86), p-value <0.05]. We conclude that this low rate of TT vaccine uptake found in this study among pregnant women increases the number of newborn babies susceptible to contracting neonatal tetanus. This study provides useful information that can inform the will increase in the probabilities of morbidities and mortalities that result from maternal and neonatal tetanus. The findings of this study should be considered in development of communication strategies targeting and prioritizing at-risk groups to increase TT vaccine uptake among pregnant women in Sudan.

Energy poverty, defined as a lack of access to reliable electricity and reliance on traditional biomass resources for cooking, affects over a billion people daily. The World Health Organization estimates that household air pollution from inefficient stoves causes more premature deaths than malaria, tuberculosis, and HIV/AIDS). Increasing demand for energy has led to dramatic increases in carbon emissions. The need for reliable electricity and limiting carbon emissions drives research on Resil-ient Hybrid Energy Systems (RHES) that provide low-carbon energy through combined wind, so-lar, and biomass energy with traditional fossil energy, increasing production efficiency and relia-bility, and reducing generating costs and carbon emissions. Microgrids have been shown as an ef-ficient means of implementing RHES, with some focused mainly on reducing the environmental impact of electric power generation. The technical challenges of designing, implementing and ap-plying microgrids involve conducting a cradle-to-grave life cycle assessment (LCA) to evaluate these systems' environmental and economic performance under diverse operating conditions to evaluate resiliency. A sample RHES has been developed and used to demonstrate implementation in rural applications. This system can provide reliable electricity for heating, cooling, lighting, and pumping clean water. This paper's primary focus is the challenges of using resilient energy sys-tems in the Middle East.

As a result of rapid population growth, an exponentially growing human population, and industrial expansion, it has become increasingly difficult to manage municipal solid wastes throughout the world. Decentralized waste management systems have created difficult situations in developing countries such as Malaysia. Wastes generated in the country, due to various cultural, social, and religious activities, organic and contributing to environmental pollution (air, water, and soil) and human health troubles. A questionnaire survey was participated by 220 construction professionals in Malaysia using structured and semi-structured methods. The framework was assessed using A partial least square structural equation modeling (PLS-SEM) to target sustainable development goals (SDG). Statistical analysis results indicate a significant effect between SCW management, since(r(270)=.687, P&lt;0.001). Improving factors has strong relationship with SCW management, since(r(270)=.723, P&lt;0.001). The mediation results also suggested a significant indirect positive effect of improving factors drivers on SCW management through policy-related factors sinceβ=0.688, t=8.254, P&lt;0.001, 95% CI for β=0.536,0.866. Finally, policy-related factors construct has a strong relationship with SCWM) management, since(r(270)=.811, P&lt;0.001) With the R Square of 0.787 and 0.785. The developed framework can improve construction waste management in the construction industry and enhance construction waste management to achieve global sustainable development goals. The findings show that one of the most critical issues of enhancing profitability is using preventive policies to reduce construction waste. This study could guide construction industry stakeholders in identifying the different waste management features during a building project's construction and design stage

Type 2 diabetes mellitus (T2DM) is an endocrine illness associate with various changes in the immune system and adaptor protein levels. Cytokine dependent hematopoietic cell linker (CLNK) is an adapter protein that regulates immune receptor signaling and acts as a regulator of the receptor signaling of T-cells and natural killer T-cell. The role of CLNK in T2DM is not studied previously. In the present study, serum CLNK level was measured and correlated with some sociodemographic and insulin resistance (IR) parameters. This is achieved by performing measurement of CLNK and insulin parameters (glucose, insulin, and HbA1c in addition to the calculation of the functions of IR (HOMA2IR), insulin sensitivity (HOMA%S), and beta-cell function (HOMA%B)) in 60 T2DM patients and 30 controls. The results indicated a significant increase (p=0.025) in serum CLNK in patients group in comparison with the controls. Multivariate generalized linear model (GLM) analysis revealed no significant effect of age, BMI, and sex on the CLNK level. The results of tests for between-subjects showed that the CLNK affects diagnosis significantly (F=7.445, p=0.008, partial η² =0.081) and its effect is approximately the same as the effect of insulin (F=8.107, p=0.006, partial η² =0.087). The correlation study showed a highly significant positive correlation between CLNK and the duration of disease (rho=0.420, p<0.001). It can be concluded that the increase CLNK in T2DM revealing the role of the adaptor proteins level in the nature of disease. Elevation of CLNK level may be used as a predictor for diabetes complications, which needs more investigations.

Objective: Rheumatoid Arthritis (RA) is a chronic inflammatory disease affecting the synovium and articular cartilage that initiates joint damage. RA associates with a change in many inflammatory biomarkers. The present study aims to measure the levels of inflammatory adipocytokines (chemerin and visfatin) and their ratio in addition to some related biomarkers in RA patients group in comparison to healthy control group and find out their efficacy in diagnosis of RA.Methods: The study included 60 RA patients and 30 healthy control group. Serum visfatin and chemerin were measured by using ELISA technique, while other biomarkers were determined spectrophotometrically. Multivariate general linear model analysis and Receiver operating curve was used to study the opportunity of using chemerin and visfatin as diagnostic tools for RA.Results: The results indicated that there was a significant increase (p<0.05) in all lipid profile components, except HDLc that decreased, in RA patients in comparison with healthy control group; while significant decrease (p<0.001) in high density lipoprotein-cholesterol of RA patients in comparison with control group. Serum chemerin, visfatin, C-reactive protein, and uric acid levels were significantly higher (p<0.05) in RA patients than those of control group. The results showed a relatively good sensitivity and specificity of chemerin (sensitivity=88.1, specificity=75.9) at a concentration=187.88ng in diagnosis of RA.Conclusions: chemerin is able to diagnose RA efficiently but this diagnoses, due to relatively small specificity, may interfere with other inflammatory disorders. However, with adjuvant with other diagnostic parameters, chemerin may represent a useful addition in diagnosis of RA.

Background: As the impacts of diabetes-induced reproductive damage are now evident in young people, we are now in an urgent need to devise new ways to protect and enhance the reproductive health of diabetic people. The purpose of this study was to assess the protective impact of enalapril (an ACE inhibitor) and paricalcitol (a vitamin D analogue) alone and in combination, on streptozotocin (STZ) diabetes-induced testicular dysfunction in rats. Material and methods: This study was carried on 50 male Sprague-Dawley rats; 10 normal rats were allocated as non-diabetic control group. 40 rats developed diabetes after receiving a single dose of STZ, then the diabetic rats were divided into four groups of equivalent number assigned as diabetic control, enalapril treated, paricalcitol treated, in addition to combined enalapril and paricalcitol treated groups. The effects of mono and combined therapy with paricalcitol and enalapril on testicular functions, sperm activity, glycemic state oxidative stress and inflammatory parameters as well as histopathological examination were assessed when compared to the normal and diabetic control rats. Results: As a result of diabetes induction, epididymal sperm count, sperm motility, serum levels of testosterone, follicle stimulating hormone (FSH) as well as luteinizing hormone (LH) and the antioxidant enzyme activities were significantly decreased, while abnormal sperm (%), insulin resistance, nitric oxide (NO), malondialdehyde (MDA), interleukin-6 (IL-6) as well as tumor necrosis factor-α (TNF-α) were significantly increased, along with sever distortion of testicular structure. Interestingly, treatment with paricalcitol and enalapril either alone or in combination significantly improved the sperm parameters, increased antioxidant enzyme activities in addition to serum levels of testosterone, FSH and LH, reduced insulin resistance, IL-6 and TNF-α levels and finally ameliorated the diabetes-induced testicular oxidative stress and histopathological damage with somewhat superior effect for paricalcitol monotherapy and combined therapy with both drugs than monotherapy with enalapril alone. Conclusion: Monotherapy with paricalcitol and its combination therapy with enalapril has a somewhat superior effect in improving the diabetes-induced testicular dysfunction (most probably as a result of their hypoglycemic, antioxidant, anti-inflammatory and anti-apoptotic properties), than monotherapy with enalapril alone in male rats, recommending a synergistic impact of both drugs.

Human papillomavirus (HPV) infections, primarily transmitted through sexual contact, have been linked to various cancers, including cervical, penile, anal, oropharynx, breast, and prostate cancers. This study presents a unique case of concurrent high-risk HPV35, HPV45, and HPV59 infections in both prostate and bladder cancer tissues from a single patient, representing the first documented instance worldwide with identical HPV types detected in two adjacent organs of the same individual. Employing a multiplex-PCR approach, gel electrophoresis, and Sanger sequencing, we confirmed the presence of these high-risk HPV types. Additionally, Western blot analysis using an HPV E7 antibody demonstrated the active expression of HPV oncoproteins in both cancer types. This discovery underscores the potential for HPV intra-organ transmission and necessitates further exploration of alternative transmission routes. The implications of our results offer new insights into the complex dynamics of HPV transmission in cancer pathogenesis.

Australia is a unique continent surrounded by the ocean and the majority of catchments flow to the coast. Some of these catchments are gauged and others are ungauged. There are 405 gauged catchments covering 2,549,000 km2 across the coastal regions of 12 drainage divisions in Australia. Whereas there are 771 catchments conceptualised as ungauged covering additional 835,000 km2. The mean annual rainfall and PET and its spatial and temporal distribution vary significantly from one drainage division to another. We developed a continuous daily streamflow time series of all gauged and ungauged catchments from 1993 onwards. We applied the GR4J lumped conceptual model to these catchments. The performance of gauged catchments was analysed through (i) visual inspection of daily hydrographs, flow duration curves and daily scatter plots, and (ii) performance metrics including NSE and PBias. Based on the NSE and PBias, performance ratings of 80% and 96% of the models respectively were found 'good'. There was no relationship found between the catchment area and model performance. The ungauged catchments were divided into four categories based on distance from potential donor catchments where observed data are available for GR4J model calibration, and Köppen climate zone. The total ungauged catchments represent 24.7% of the total drainage division areas. The streamflow from ungauged catchments was estimated using GR4J model based on the parameters of their donor catchments. Overall, runoff ratios from ungauged catchments were found to be higher compared to their donor gauged catchments, likely driven by their higher rainfall and less PET. This tendency was particularly evident in two drainage divisions – the Carpentaria Coast (CC) and Tanami-Timor Sea Coast (TTS) where ungauged areas comprised 51% and 43% respectively. The mean gauged annual streamflow varied significantly across drainage divisions – 230 GL from South Australian Gulf (SAG) to 146,150 GL in TTS. The streamflow from all ungauged catchments was estimated at 232,200 GL per year. Overall, the average streamflow from all drainage divisions, including gauged and ungauged areas, across the coastal regions of Australia was estimated at 419,950 GL per year. This nationwide estimate of streamflow dataset could potentially enhance our understanding of coastal processes and improvements of marine modelling systems and tools.