Tardive dyskinesia (TD) is a phenomenon predominantly observed as a result of the long-term use of dopamine receptor blockers (antipsychotics). TD is a group of involuntary, irregular hyperkinetic movements, mainly in the muscles of the face, eyelid muscles, lips, tongue, and cheeks, and less frequently in the limbs, neck, pelvis, and trunk. In some patients, TD takes on an extremely severe form, massively disrupting functioning, moreover, causing stigmatization and suffering. Deep brain stimulation (DBS), a method used, among others, in Parkinson's disease, is also an effective treatment for TD and often becomes a method of last resort, especially in severe, drug-resistant forms. The procedure is relatively new in TD, so the available reliable clinical studies are few and consist mainly of case reports. Unilateral and bilateral stimulation of two sites has proven efficacy in TD treatment. Most authors describe stimulation of the globus pallidus internus (GPi); less frequent descriptions involve the hypothalamic nucleus (STN). In the present paper, we provide up-to-date information on the stimulation of both mentioned brain areas. We also compare the efficacy of the two methods by comparing the two available studies, which included the largest groups of patients. Although GPi stimulation is more frequently used clinically, our initial analysis indicates comparable results (reduction of involuntary movements) with STN DBS.

The detection of coronavirus (COVID-19) is now a critical task for the medical practitioner. The coronavirus spread so quickly between people and approaches 100,000 people worldwide. In this consequence, it is very much essential to identify the infected people so that prevention of spread can be taken. In this paper, the deep feature plus support vector machine (SVM) based methodology is suggested for detection of coronavirus infected patient using X-ray images. For classification, SVM is used instead of deep learning based classifier, as the later one need a large dataset for training and validation. The deep features from the fully connected layer of CNN model are extracted and fed to SVM for classification purpose. The SVM classifies the corona affected X-ray images from others. The methodology consists of three categories of Xray images, i.e., COVID-19, pneumonia and normal. The method is beneficial for the medical practitioner to classify among the COVID-19 patient, pneumonia patient and healthy people. SVM is evaluated for detection of COVID-19 using the deep features of different 13 number of CNN models. The SVM produced the best results using the deep feature of ResNet50. The classification model, i.e. ResNet50 plus SVM achieved accuracy, sensitivity, FPR and F1 score of 95.33%,95.33%,2.33% and 95.34% respectively for detection of COVID-19 (ignoring SARS, MERS and ARDS). Again, the highest accuracy achieved by ResNet50 plus SVM is 98.66%. The result is based on the Xray images available in the repository of GitHub and Kaggle. As the data set is in hundreds, the classification based on SVM is more robust compared to the transfer learning approach. Also, a comparison analysis of other traditional classification method is carried out. The traditional methods are local binary patterns (LBP) plus SVM, histogram of oriented gradients (HOG) plus SVM and Gray Level Co-occurrence Matrix (GLCM) plus SVM. In traditional image classification method, LBP plus SVM achieved 93.4% of accuracy.

We examine the use of deep learning (neural networks) to predict the movement of the S&P 500 Index using past returns of all the stocks in the index. Our analysis finds that the future direction of the S&P 500 index can be weakly predicted by the prior movements of the underlying stocks in the index. Decomposition of the prediction error indicates that most of the lack of predictability comes from randomness and only a little from nonstationarity. We believe this is the first test of S&P500 market efficiency that uses a very large information set, and it extends the domain of weak-form market efficiency tests.

Video self-supervised learning (VideoSSL) offers significant potential for reducing annotation costs and enhancing a wide range of downstream tasks in video understanding. The ultimate goal of VideoSSL is to achieve human-level video intelligence across a spectrum of tasks, from low-level tasks such as pixel temporal correspondence to high-level complex spatio-temporal tasks like action recognition. However, most existing VideoSSL methods focus on isolated aspects of this spectrum and fail to integrate different levels of task complexity. Our study presents the first comprehensive survey that connects all families of VideoSSL methods. We provide a detailed review of the full spectrum of VideoSSL, from low to high levels, by conceptually linking their self-supervised learning objectives and including a comprehensive categorization. Our extensive evaluation highlights the strengths and limitations of each SSL objective across various downstream task families. We also detail the challenges in current VideoSSL research such as data curation, interpretability, deployment, and privacy concerns, an area that previous surveys have not thoroughly explored. In addressing these challenges, we recognize the strengths of existing methods in addressing these challenges and outline future directions for research.

Distance Learning has become the new standard, especially after the pandemic and due to the technological advances, that are incorporated into the teaching procedure. At the same time, the augmented use of the internet has blurred the borders between distance and conventional learning. Students interact mainly through LMSs, leaving their digital traces that can be leveraged to improve the educational process. This work aims to propose a model that can capture the students' behaviors based on the clickstream data associated with the discussion forum and additionally to suggest interpretable patterns that will support education administrators and tutors in the decision-making process. To achieve our goal, we use Social Network Analysis (SNA) as networks represent complex interactions in a meaningful and easily interpretable way. Moreover, simple or complex network metrics are becoming available to provide valuable insights into the students’ social interaction. This study concludes that by leveraging the imprint of these actions in an LMS and using metrics of SNA, differences can be spotted in the communicational patterns that go beyond simple participation recording. Although HITS and PageRank algorithms were created with completely different targeting, it is shown that they can also reveal methodological features in students’ communicational approach.

Using data-driven models to solve predictive maintenance problems has been prevalent for original equipment manufacturers (OEMs). However, such models fail to solve two tasks that OEMs are interested in: (1) Making the well-built failure prediction models working on existing scenarios (vehicles, working conditions) adaptive to target scenarios. (2) Finding out the failure causes, furthermore, determining whether a model generates failure predictions based on reasonable causes. This paper investigates a comprehensive architecture towards making the predictive maintenance system adaptive and interpretable by proposing (1) an ensemble model dealing with time-series data consisting of a long short-term memory (LSTM) neural network and Gaussian threshold to achieve failure prediction one week in advance and (2) an online transfer learning algorithm and a meta learning algorithm, which render existing models adaptive to new vehicles with limited data volumes. (3) Furthermore, the Local Interpretable Model-agnostic Explanations (LIME) interpretation tool and super-feature methods are applied to interpret individual and general failure causes. Vehicle data from Isuzu Motors, Ltd., are adopted to validate our method, which include time-series data and histogram data. The proposed ensemble model yields predictions with 100% accuracy for our test data on engine stalling problem and is more rapidly adaptive to new vehicles with smaller error following application of either online transfer learning or the meta learning method. The interpretation methods help elucidate the global and individual failure causes, confirming the model credibility.

We discuss the implementation of a suite of virtual diagnostics at the FACET-II facility currently under commissioning at SLAC National Accelerator Laboratory. The diagnostics will be used for prediction of the longitudinal phase space along the linac, spectral reconstruction of the bunch profile and non-destructive inference of transverse beam quality (emittance) using edge radiation at the injector dogleg and bunch compressor locations. These measurements will be folded in to adaptive feedbacks and ML-based reinforcement learning controls to improve the stability and optimize the performance of the machine for different experimental configurations. In this paper we describe each of these diagnostics with expected measurement results based on simulation data and discuss progress towards implementation in regular operations.

While the use of crime data has been widely advocated in the literature, its availability is often limited to large urban cities and isolated databases tend not to allow for spatial comparisons. This paper presents an efficient machine learning framework capable of predicting spatial crime occurrences, without using past crime as a predictor, and at a relatively high resolution: the U.S. Census Block Group level. The proposed framework is based on an in-depth multidisciplinary literature review allowing the selection of 188 best-fit crime predictors from socio-economic, demographic, spatial, and environmental data. Such data are published periodically for the entire United States. The selection of the appropriate predictive model was made through a comparative study of different machine learning families of algorithms, including generalized linear models, deep learning, and ensemble learning. The gradient boosting model was found to yield the most accurate predictions for violent crimes, property crimes, motor vehicle thefts, vandalism, and the total count of crimes. Extensive experiments on real-world datasets of crimes reported in 11 U.S. cities demonstrated that the proposed framework achieves an accuracy of 73 and 77% when predicting property crimes and violent crimes, respectively.

The prevalence of differential equations as a mathematical technique has refined the fields of control theory and constrained optimization due to the newfound ability to accurately model chaotic, unbalanced systems. However, in recent research, systems are increasingly more nonlinear and difficult to model using Differential Equations only. Thus, a newer technique is to use policy iteration and Reinforcement Learning, techniques that center around an action and reward sequence for a controller. Reinforcement Learning (RL) can be applied to control theory problems since a system can robustly apply RL in a dynamic environment such as the cartpole system (an inverted pendulum). This solution successfully avoids use of PID or other dynamics optimization systems, in favor of a more robust, reward-based control mechanism. This paper applies RL and Q-Learning to the classic cartpole problem, while also discussing the mathematical background and differential equations which are used to model the aforementioned system.

Crowdsourcing is one of the new themes that has appeared in the last decade. Considering its potential, more and more organisations reach for it. It is perceived as an innovative method that can be used for problem solving, improving business processes, creating open innovations, building a competitive advantage, and increasing transparency and openness of the organisation. Crowdsourcing is also conceptualised as a source of a knowledge-based organisation. The importance of crowdsourcing for organisational learning is seen as one of the key themes in the latest literature in the field of crowdsourcing. Since 2008, there has been an increase in the interest of public organisations in crowdsourcing and including it in their activities. This article is a response to the recommendations in the subject literature, which states that crowdsourcing in public organisations is a new and exciting research area. The aim of the article is to present a new paradigm that combines crowdsourcing levels with the levels of learning. The research methodology is based on an analysis of the subject literature and exemplifications of organisations which introduce crowdsourcing. This article presents a cross-sectional study of four Polish municipal offices that use four types of crowdsourcing, according to the division by J. Howe: collective intelligence, crowd creation, crowd voting, and crowdfunding. Semi-structured interviews were conducted with the management personnel of those municipal offices. The research results show that knowledge acquired from the virtual communities allows the public organisation to anticipate changes, expectations, and needs of citizens and to adapt to them. It can therefore be considered that crowdsourcing is a new and rapidly developing organisational learning paradigm.

Continual learning (CL), a.k.a lifelong learning, is an emerging research topic that has been attracting increasing interest in the field of machine learning. With human activity recognition (HAR) playing a key role in enabling numerous real-world applications, an essential step towards the long-term deployment of such systems is to extend the activity model to dynamically adapt to changes in people’s everyday behavior. Current research in CL applied to HAR domain is still under-explored with researchers exploring existing methods developed for computer vision in HAR. Moreover, analysis has so far focused on task-incremental or class-incremental learning paradigms where task boundaries are known. This impedes the applicability of such methods for real-world systems. To push this field forward, we build on recent advances in the area of continual learning and design a lifelong adaptive learning framework using Prototypical Networks, LAPNet-HAR, that processes sensor-based data streams in a task-free data-incremental fashion and mitigates catastrophic forgetting using experience replay and continual prototype adaptation. Online learning is further facilitated using contrastive loss to enforce inter-class separation. LAPNet-HAR is evaluated on 5 publicly available activity datasets in terms of its ability to acquire new information while preserving previous knowledge. Our extensive empirical results demonstrate the effectiveness of LAPNet-HAR in task-free CL and uncover useful insights for future challenges.

The learning system is primarily based on teaching, and teaching through digital resources is referred to as e-learning. As the world progresses towards success day by day, the use of technology, digital devices, and modern techniques is becoming increasingly prevalent. The global shift from traditional paperwork to digital learning is one of the most significant changes in the education sector. However, many factors have created numerous hurdles during the online setup. The Covid-19 pandemic has led to serious problems all over the world, with the education sector being one of the most affected. One of the greatest challenges students face during online education is the lack of digital infrastructure, especially in remote areas of Pakistan. The biggest challenge is connecting students with teachers due to limited internet access. Without proper internet connectivity, both students and teachers cannot access educational materials. In this context, the government plays a crucial role in providing adequate facilities to students, particularly in primary schools. If proper infrastructure is not made available during this pandemic, students will be deprived of a good quality education. Therefore, good infrastructure is essential for effective online education. With the proper resources in place, students will be able to receive a quality education.

The increasing adoption of student-centred learning environs by the institutions of higher education in business, has led to new mechanisms and methodologies such as the Simulation-Based Learning (SBL), Problem-Based Learning (PBL) and Challenge-Based Learning (CBL). Literature has shown evidence of raising interest in these methodologies towards a more experiential paradigm with regard to upcoming events from the surrounding real-world context. This paper presents a Systematic Bibliographic Literature Review (SBLR) with respect to the integration and application of these innovative and collaborative methodologies in higher education. It aimed to identify its relevant advantages, challenges, and consequences for the future of business education. Bibliographic databases were searched for documents published up to May 2024 to categorize key topics discussed in the literature on SBL, PBL and CBL. The review process identified 89 empirical and non-empirical papers on SBL, PBL and CBL, business related paperwork, which resulted from the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) method. PRISMA is a framework with evidence-based data designed to help authors perform a systematic literature review. Data analysis revealed diverse subthemes for those methodologies uses in business higher education institutions. The research questions “What are the advantages, challenges and implications of SBL, PBL and CBL altogether, in the training of business students?” guided the study. The central output of the research is the discovery of the varying uses of SBL, PBL and CBL overall, to cope with diverse demands arising within environmental context. Future research directions are suggested.

This study introduces the Dynamic Feedback-Driven Learning Optimization Framework (DFDLOF), an innovative machine learning-based approach to personalize educational pathways. DFDLOF leverages advanced algorithms for in-depth analysis of learner data, enabling the dynamic customization of educational content and methodologies. Its application in diverse online platforms, including Khan Academy and Coursera, underscores its adaptability and scalability. DFDLOF enhances learner engagement and outcomes by providing tailored learning experiences and real-time feedback. Key insights reveal its strengths in personalized education, particularly in dynamically adapting learning paths and the importance of real-time feedback. Challenges identified include integration complexities and data privacy concerns. Future research directions emphasize the need for longitudinal impact studies and broader demographic applications. This study contributes significantly to the evolving domain of adaptive learning technologies, demonstrating the transformative potential of machine learning in personalizing education.

Few-shot fine-grained image classification (FSFGIC) methods refer to machine learning methods which aim to classify images (e.g., bird species, flowers, and airplanes) belonging to subordinate object categories of the same entry-level category with only a few samples. It is worth to note that feature representation learning is used not only to represent training samples, but also to construct classifiers for performing various FSFGIC tasks. In this paper, starting from the definition of FSFGIC, a taxonomy of feature representation learning for FSFGIC is proposed. According to this taxonomy, we discuss key issues on FSFGIC (including data augmentation, local or/and global deep feature representation learning, class representation learning, and task specific feature representation learning). The existing popular datasets and evaluation standards are introduced. Furthermore, a novel classification performance evaluation mechanism is designed with a 0.95 confidence interval for judging whether the classification accuracy obtained by a certain specified method is good or bad. Moreover, current challenges and future trends of feature representation learning on FSFGIC are elaborated.

Background/Objectives: In response to the impact of the COVID-19 pandemic, the authors implemented an innovative and alternative approach to practice learning for a Cohort of Year One Adult and Mental Health student nurses. The evaluation aimed to explore the effectiveness of virtual practice learning as a viable alternative to traditional practice placements and the impact on the student practice learning experience. Methods: All year one student nurses attending the four Simulated Practice Learning Experience (SPLE) weeks were invited to participate and complete a generated questionnaire within the virtual environment on their final day of each week. The evaluation employed a mixed methods approach to evaluate the effectiveness of the SPLE on student satisfaction and their overall practice learning experience. Results: A mean total of 205 student nurses completed the questionnaire, achieving a response rate of 98-100%. Students reported an overall satisfaction score of 88%, highlighting their preparedness and positive feedback on the organisation, delivery, and content of the SPLE. Qualitative analysis revealed key themes, including the development of transferable skills and personal growth, the value of peer learning, the benefits of a virtual environment, and appreciation of service user and healthcare professional input. Students reported significant personal growth, improved communication skills, and a deeper understanding of holistic care through interactive and collaborative learning experiences. Conclusions: This evaluation underscores the innovative potential of virtual practice learning to enhance nursing education, emphasising the importance of integrating emerging technologies and diverse pedagogical approaches. The findings suggest that SPLEs can effectively prepare nursing students for the complexities of clinical practice while addressing the evolving demands of healthcare education. Future research should focus on longitudinal studies to assess the sustained impact of virtual learning on clinical experiences and professional development.

The rapid advancement of technology has revolutionized language learning, introducing innovative methods that depart from traditional instructional approaches. This study employs a mixed-methods research design to examine the impact of chatbot-based language learning support, adaptive learning algorithms, and virtual reality language immersion on the language learning proficiency and self-regulated learning skills of English as a Foreign Language (EFL) learners. The research design includes quantitative analysis of language proficiency scores and qualitative exploration of learner experiences with the technological interventions. The theoretical implications of this study are rooted in constructivist and socio-cultural learning theories, which underpin the design and implementation of the technological interventions. The triangulation of qualitative and quantitative data revealed that the participants' positive perceptions of the effectiveness of chatbot-based language learning support were supported by the quantitative results, with the variable "chat-bot based support" demonstrating a substantial mean difference compared to other groups. This convergence of findings reinforces the positive influence of chatbot-based support on language learning outcomes and highlights the importance of integrating theoretical perspectives with empirical evidence to gain a comprehensive understanding of the impact of technological interventions on language learning outcomes for EFL learners. The study's findings provide insights into the potential of these technological interventions to optimize language learning outcomes for EFL learners and promote autonomous learning behaviors.

Change Detection (CD) of aerial images refers to identifying and analyzing changes between two or more aerial images of the same location taken at different times. The CD is a highly challenging task due to the need to distinguish relevant changes, such as urban expansion, deforestation, or post-disaster damage assessment, from irrelevant ones, such as light conditions, shadows, and seasonal variations. Many CD papers have recently been published, where most of the papers that proposed a new model contained a comparison between their proposed and state-of-the-art (SOTA) models. While many recent studies propose new deep learning (DL) models for improving CD performance, their comparative analyses are often restricted, lacking comprehensive insights into the proposed models' real-world generalizability, robustness, and performance trade-offs across diverse change characteristics. This paper presents a novel generic framework to systematically benchmark and assess DL-based CD models through three parallel pipelines: 1) cross-testing models on diverse benchmark datasets to evaluate generalization, 2) robustness analysis against different image corruptions, and 3) multi-faceted contour-level analytics evaluating detection sensitivity to change size/complexity. The framework is applied to comparatively evaluate five state-of-the-art DL-based CD models - Changeformer, BIT, Tiny, SNUNet, and CSA-CDGAN. Extensive experiments unveil each model's strengths, limitations and biases, highlighting their relative proficiencies in generalizing across data distributions, resilience to noise corruption, and discriminative capabilities for changes of varying characteristics. The proposed benchmarking framework demonstrates significant potential for guiding the selection of suitable CD models tailored to specific application requirements by comprehensively evaluating their generalizability, robustness, and detection capabilities across diverse real-world scenarios. This systematic evaluation approach can drive future research into developing more robust and versatile CD solutions aligned with practical needs.

The safe and reliable operation of autonomous vehicles in complex and dynamic environments is heavily dependent upon exteroceptive and proprioceptive sensors. A LiDAR system generates accurate 3D point clouds, which are crucial for the detection, classification, and tracking of multiple targets. LiDAR data, however, presents significant challenges due to its density, noise, and varying sampling rates. In this study, various clustering and MTT techniques for LiDAR point clouds will be identified and classified within the context of autonomous driving to assess the state-of-the-art methods’ key challenges and their performances. We have categorized clustering and MTT methods used in AV applications, identified research gaps and challenges and analyzed existing algorithms and their challenges in detail. Researchers and practitioners in the field of autonomous driving will find this review to be a valuable resource.

More than 700 thousand human deaths from mosquito bites are observed annually in the world. It is more than 2 times the number of annual murders in the world. In this regard, the invention of new more effective methods of protection against mosquitoes is necessary. In this article for the first time, comprehensive studies of mosquito neutralization using machine vision and a 1 W power laser are considered. Developed laser installation with Raspberry Pi that changing the direction of the laser with a galvanometer. We developed a program for mosquito tracking in real. The possibility of using deep neural networks, Haar cascades, machine learning for mosquito recognition was considered. We considered in detail the classification problems of mosquitoes in images. A recommendation is given for the implementation of this device based on a microcontroller for subsequent use as part of an unmanned aerial vehicle. Any harmful insects in the fields can be used as objects for control.

In the realm of educational technology, Data Analytics (DA) is reshaping teaching and learning. This paper investigates the impact of DA on education, specifically comparing Student Information Systems (SIS) and Learning Management Systems (LMS). Data-driven insights from SIS and LMS platforms enable educators to tailor instructional strategies to individual student needs effectively. While SIS manages student data for administrative tasks, LMS offers tools for content delivery and collaboration. Using the strengths of SIS and LMS, educators can optimise teaching and learning experiences, tracking student progress, and fostering collaboration. The comparison emphasises their distinct roles: SIS manages administrative tasks, while LMS focusses on content delivery and collaboration. Using both systems, educators improve the teaching and learning experience, leveraging DA for continuous improvement. In summary, this paper underscores the transformative role of DA in education, framed within the context of comparing the SIS and LMS functionalities. By examining the intersection of data-driven decision making and educational technology, educators are equipped with the tools and knowledge to harness the power of data for meaningful and impactful teaching and learning.

In this paper, various machine learning techniques are discussed. These algorithms are used for many applications which include data classification, prediction, or pattern recognition. The primary goal of machine learning is to automate human assistance by training an algorithm on relevant data. This paper should also serve as a collection of various machine learning terminology for easy reference.

Federated Learning (FL), as a distributed machine learning method, is particularly suitable for training models that require large amounts of data while meeting increasingly strict data privacy and security requirements. Although FL effectively protects the privacy of participants by avoiding the sharing of raw data, balancing the risks of privacy leakage with model performance remains a significant challenge. To address this, this paper proposes a new algorithm—FL-APB (Federated Learning with Adversarial Privacy-Performance Balancing). This algorithm combines adversarial training with privacy protection mechanisms to dynamically adjust privacy and performance budgets, optimizing the balance between the two while enhancing and ensuring performance. Experimental results demonstrate that the FL-APB algorithm significantly improves model performance across various adversarial training scenarios, while effectively protecting the privacy of participants through adversarial training of privacy data.

Generic text embeddings have demonstrated considerable success across a multitude of applications. However, these embeddings are typically derived by modeling the co-occurrence patterns within text-only corpora, which can limit their ability to generalize effectively across diverse contexts. In this study, we investigate methodologies that incorporate visual information into textual representations to overcome these limitations. Through extensive ablation studies, we introduce a novel and straightforward architecture named VisualText Fusion Network (VTFN). This architecture not only surpasses existing multimodal approaches on a range of well-established benchmark datasets but also achieves state-of-the-art performance on image-related textual datasets while utilizing significantly less training data. Our findings underscore the potential of integrating visual modalities to substantially enhance the robustness and applicability of text embeddings, paving the way for more nuanced and contextually rich semantic representations.

The current design of reinforcement learning methods demands exhaustive computing. Algorithms such as Deep Q-Network achieved outstanding results in the development of the area. However, the need for thousands of parameters and training episodes is still a problem. Thus, this document proposes a comparative analysis of the Q-Learning algorithm (the inception to create Deep Q Learning) and our proposed method termed M-Learning. The comparison among algorithms using Markov decision processes with delayed reward as a general testbench framework. Firstly, a full description of the main problems related to implementing Q-Learning, mainly about its multiple parameters. Then, the foundations of our proposed heuristic with its formulation and the whole algorithm were reported in detail. Finally, the methodology chosen to compare both algorithms was to train the algorithms in the Frozen Lake environment. The experimental results and an analysis of the best solutions found that our proposed algorithm highlights the differences in the number of episodes necessary and their standard variations. The code will be available on a GitHub repository once the paper is published.

Introduction: Dental students’ use of online material to supplement learning has been studied, but educator awareness and reaction to the findings of this research is unknown. This small local study aimed to investigate dental students’ use of online content as a learning tool from an educator’s perspective.Methods: Educators at an Irish dental school completed a survey based on dental students’ use of online learning. Quantitative descriptive analyses were carried out as appropriate on the data collected, and a subsequent focus group was held to gain deeper insight into survey results. Data were analysed for themes by deductive and inductive coding methods.Results: This study found a sample of educators were aware of some student behaviours around online videos. Most educators correctly thought that students are likely to refer to online videos to prepare for dental procedures. Several educators believed that teachers should incorporate videos into their learning, but do not themselves upload or recommend online videos. Most recalled discussing accuracy and/or relevancy of online content with their students. Fewer thought that students would discuss contradictory videos with them. Focus group participants expressed concern over the accuracy of online content. This along with a lack of time were some reasons deterring them from referring students to online videos. Conclusions: An opportunity exists for dental educators and their students to have local dialogue around (1) student use, critical appraisal, and sharing of dental procedural video material; and (2) perceived benefits and challenges of incorporating both school-produced and online videos into teaching and learning. Although arguably non-generalizable beyond this context, this study may inform future research and serve to spark conversations within schools regarding video use for teaching clinical dental procedures.

Sleep disorder is a disease that can be categorized as both an emotional and physical problem. It imposes several difficulties and problems, such as distress during the day, sleep-wake disorders, anxiety, and several other problems. Hence, the main objective of this research is to utilize the strong capabilities of machine learning in the prediction of sleep disorders. In specific, this research aims to meet three main objectives. These objectives are to identify the best regression model, the best classification model, and the best learning strategy that highly suits sleep disorder datasets. Considering two related datasets and several evaluation metrics that are related to the tasks of regression and classification, the results revealed the superiority of the MultilayerPerceptron, SMOreg, and KStar regression models compared with the other twenty-three regression models. Also, IBK, RandomForest, and RandomizableFilteredClassifier showed superior performance compared with other classification models that belong to several learning strategies. Finally, the Function learning strategy showed the best predictive performance among the six considered strategies in both datasets and with respect to the most evaluation metrics.

This review paper investigates the influence of gestures on foreign language (FL) vocabulary learning through a series of experiments conducted in our laboratory. The manipulation of the gesture-word relationship was a consistent factor across the studies. Firstly, we examined the impact of gestures on noun and verb learning. The results revealed that participants exhibited better learning outcomes when FL words were accompanied by congruent gestures compared to a no gesture condition. This suggests that gestures have a positive effect on FL learning when there is a meaningful connection between the words and the accompanying gestures. However, in general, the recall of words in conditions where gestures were incongruent or lacked meaning was lower than in the no gesture condition. This indicates that under certain circumstances, gestures may have a detrimental impact on FL learning. We analyzed these findings in terms of their implications for facilitating or interfering with FL acquisition. Secondly, we addressed the question of whether individuals need to physically perform the gestures themselves to observe the effects of gestures on vocabulary learning. To explore this, participants were divided into two experimental groups. In one group, participants learned the words by actively performing the gestures ("do" learning group), while the other group simply observed the gestures performed by others ("see" learning group). The processing of congruent gestures facilitated the recall of FL words in both the "see" and "do" learning groups. However, the interference effect associated with processing incongruent gestures was more pronounced in the "see" learning group than in the "do" learning group. Thus, the performance of gestures appears to mitigate the negative impact that gestures may have on the acquisition of FL vocabulary. In conclusion, our findings suggest that iconic gestures can serve as an effective tool for learning vocabulary in a FL, particularly when the gestures align with the meaning of the words. Furthermore, the active performance of gestures helps counteract the negative effects associated with inconsistencies between gestures and word meanings. Consequently, if a choice must be made, a FL learning strategy in which learners acquire words while making gestures congruent with their meaning would be highly desirable.

Federated learning (FL) has become a burgeoning and attractive research area, which provides a collaborative training scheme for distributed data sources with privacy concerns. Most existing FL studies focus on taking unimodal data, such as images and text, as the model input and resolving the heterogeneity challenge, i.e., the non-identically distributed (non-IID) challenge caused by data distribution imbalance related to data labels and data amount. In real-world applications, data are usually described by multiple modalities. However, to the best of our knowledge, only a handful of studies have been proposed to improve the system performance by utilizing multimodal data. In this survey paper, we identify the significance of this emerging research topic – multimodal federated learning (MFL) and perform a literature review on the state-of-art MFL methods. Furthermore, we categorize multi-modal federated learning into congruent and incongruent multimodal federated learning based on whether all clients possess the same modal combinations. We investigate the feasible application tasks and related benchmarks for MFL. Lastly, we summarize the promising directions and fundamental challenges in this field for future research.

The demand for explainable and transparent models increases with the continued success of reinforcement learning. In this article, we explore the potential of generating shallow decision trees (DT) as simple and transparent surrogate models for opaque deep reinforcement learning (DRL) agents. We investigate three algorithms for generating training data for axis-parallel and oblique DTs with the help of DRL agents ("oracles") and evaluate these methods on classic control problems from OpenAI Gym. The results show that one of our newly developed algorithms, the iterative training, outperforms traditional sampling algorithms, resulting in well-performing DTs that often even surpass the oracle from which they were trained. Even higher dimensional problems can be solved with surprisingly shallow DTs. We discuss the advantages and disadvantages of different sampling methods and insights into the decision-making process made possible by the transparent nature of DTs. Our work contributes to the development of not only powerful but also explainable RL agents and highlights the potential of DTs as a simple and effective alternative to complex DRL models.

In this paper, we have investigated the impact of an early learning assessment on students' motivation for improving their performance throughout the semester. An observation analysis was conducted on an entry level mechanical engineering course in which students are enrolled in during their first semester of engineering work. This study analyzes the effect that a first exam, with an average below a passing grade, has on student's outcome in the course. It was hypothesized that students were motivated to achieve their desired grade outcomes following inadequate performance on the first exam. This was investigated by diving into the results of the course and referencing initial performance to the remaining exam and assessment outcomes. Students were placed into grade bands ranging from 0 to 100 in 20% increments. Their results were tracked and it was shown that for the second mechanics exam, averages jumped 43.333%, 35.35%, and 30.055% for grade bands of 0 to 20, 20 to 40, and 40 to 60 respectively. Assessment grades increased as well with the remaining assessments being averaged to a score of 91.095%. Variables contributing to student performance came from both with-in and outside the classroom. Learning communities, material differentiation, and student and professor adaptation all contributed to the rise in performance. It was concluded that the internal and external variables acted in combination with one another to increase student dedication to achieve success.

Machine learning methods have widely been applied to detect anomalies in machine and cutting tool behavior during lathe or milling. However, detecting anomalies in the workpiece itself did not get the same attention by researchers. That is why in this article, the authors present a pub-licly available multivariate time series dataset which was recorded during milling of 16MnCr5. Due to artificially introduced, though realistic anomalies in the workpiece the dataset can be ap-plied for anomaly detection. By using a convolutional autoencoder as a first model good results in detecting the location of the anomalies in the workpiece were achieved. Furthermore, milling tools with two different diameters where used which led to a dataset eligible for transfer learn-ing. The objective of this article is to provide researchers with a real-world time series dataset of the milling process which is suitable for modern machine learning research topics like anomaly detection and transfer learning.

While machine learning models are powering more and more everyday devices, there is a growing need for explaining them. This especially applies to the use of Deep Reinforcement Learning in solutions that require security, such as vehicle motion planning. In this paper, we propose a method of understanding what the RL agent’s decision is based on. The method relies on conducting statistical analysis on a massive set of state-decisions samples. It indicates which input features have an impact on the agent’s decision and the relationships between decisions, the significance of the input features, and their values. The method allows us for determining whether the process of making a decision by the agent is coherent with human intuition and what contradicts it. We applied the proposed method to the RL motion planning agent which is supposed to drive a vehicle safely and efficiently on a highway. We find out that making such analysis allows for a better understanding agent’s decisions, inspecting its behavior, debugging the ANN model, and verifying the correctness of input values, which increases its credibility.

Background: Risk of metastatic recurrence of breast cancer after initial diagnosis and treatment depends on the presence of a number of risk factors. Although most univariate risk factors have been identified using classical methods, machine-learning methods are also being conducted to tease out non-obvious contributors to a patient’s individual risk of developing late distant metastasis. Bayesian-network algorithms may predict not only risk factors but also interactions among these risks, which consequently lead to metastatic breast cancer. We proposed to apply a previously developed machine-learning method to predict risk factors of 5-, 10- and 15-year metastasis. Methods: We applied a previously validated algorithm named the Markov Blanket and Interactive risk factor Learner (MBIL) on the electronic health record (EHR)-based Lynn Sage database (LSDB) from the Lynn Sage Comprehensive Breast Cancer at Northwestern Memorial Hospital. This algorithm provided an output of both single and interactive risk factors of 5-, 10-, and 15-year metastasis from LSDB. We individually examined and interpreted the clinical relevance of these interactions based on years to metastasis and the reliance on interactivity between risk factors. Results: We found that with lower alpha values (low interactivity score), the prevalence of variables with an independent influence on long term metastasis was higher (i.e., HER2, TNEG). As the value of alpha increased to 480, stronger interactions were needed to define clusters of factors that increased the risk of metastasis (i.e., ER, smoking, race, alcohol usage). Conclusion: MBIL identified single and interacting risk factors of metastatic breast cancer, many of which were supported by clinical evidence. These results strongly recommend the development of further large data studies with different databases to validate the degree to which some of these variables impact metastatic breast cancer in the long term.

Education setting evolved from historical open learning system to traditional classroom set-up to distance learning modality. Teaching-Learning practice is transformed with an evolution of teaching-learning materials. With technological advancement in progressive manner and it’s increasing use in academic setting, distance learning has been the on-demand and on-debate topic in current educational discourse. Comparatively fresh topic in Nepali academic setting, this paper intended to analyze the perception of Nepali students towards online modality in Nepali academic setting. This paper further analyzed the student’s preference towards distance learning in current Nepali academic setting. Research findings were analyzed based on data collected through literature review, interview with students and professor and quantitative data collection through use of google form. Study identified opportunities as revenue generation; continuation of academic career from any part of country; increase learning outcome among jobholders. Study identified challenges as unequal access and quality of internet facilities; affordability of laptops/computers; limited interaction; and frequent disturbances. Seeing the better prospects, study strongly supported the need of shift in academic shift from traditional setting to non-traditional setting in Nepali context to meet the global needs of competitive and quality education.

If students do not fully apply themselves, then they may be considered responsible for the result of being inadequately prepared. +- Nevertheless, student outcomes are more likely to reflect a combination of both effort and systematic problems with overall course architecture. Deficiencies in course design result in inadequate preparation that adversely and directly impacts students’ productivity upon entering the workforce. Such an impact negatively influences students' ability to maintain gainful employment and provide for their families, which inevitably contributes to the development of issues concerning their psychological well-being. It is well-documented that incorporating active learning strategies in course design and delivery can enhance student learning outcomes. Despite the benefit of implementing active learning techniques, rarely in the real world will it be possible for techniques to be used in isolation of one another. Therefore, the purpose of this proposed study is to determine the interactive effects of two active learning strategies because, at a minimum, technique-pairs more accurately represent the application of active learning in the natural educational setting. There is a paucity of evidence in the literature directed toward investigating the interactive effects of multiple active learning techniques that this study is aimed at filling. The significance of this research is that, by determining the interactive effects of paired active learning strategies, other research studies on the beneficial effects of using particular active learning technique-pairs will be documented contributing to the literature so that ultimately classroom instruction may be customized according to the determination of optimal sequencing of strategy-pairs for particular courses, subjects, and desired outcomes that maximize student learning.

Text annotation is an essential element of the natural language processing approaches. The manual annotation process performed by humans has several drawbacks, such as subjectivity, slowness, fatigue, and possibly carelessness. In addition, annotators may annotate ambiguous data. So, we developed the concept of automated annotation to get the best annotations using several machine-learning approaches. The proposed approach is based on an ensemble algorithm of meta-learners and meta-vectorizer techniques. The approach employs a semi-supervised learning technique for automated annotation, aimed at detecting hate speech. This involves leveraging various machine learning algorithms, including Support Vector Machine (SVM), Decision Tree (DT), K-Nearest Neighbors (KNN), and Naive Bayes (NB), in conjunction with Word2Vec and TF-IDF text extraction methods. The annotation process is performed using 13,169 Indonesian YouTube comments data. The proposed model used a Stemming approach using data from Sastrawi and also new data of 2,245 words. Semi-supervised learning uses 5%, 10%, and 20% of labeled data as compared to performing labeling based on 80% of the datasets. In semi-supervised learning, the model learns from the labeled data, which provides explicit information, and the unlabeled data, which offers implicit insights. This hybrid approach enables the model to generalize and make informed predictions even when limited labeled data is available, ultimately enhancing its ability to handle real-world scenarios with scarce annotated information. In addition, the proposed method uses a variety of thresholds for matching words labeled with hate speech ranging from 0.6, 0.7, 0.8, and 0.9. The experiment showed that the KNN-Word2ec model has the best accuracy value of 96.9% with a scenario of 5%:80%:0.9. However, several other methods have also accuracy above 90%, such as SVM and DT based on both text extraction methods in several test scenarios.

Higher education teaching staff members need to build a scientifically accurate and comprehensive understanding of the function of the brain in learning to optimize teaching and achieve excellent student learning. An international consortium developed a professional development six-module course on educational neuroscience and online community of practice applying design thinking. A mixed methods research design was employed to investigate the attitudes of thirty-two (N=32) participating academics using a survey comprising eleven closed and open questions. Data analysis methods included descriptive statistics, correlation, generalized additive model and grounded theory. The overall evaluation demonstrated a notable satisfaction level with regard to the quality of the course. Given the power of habits, mentoring and peer interactions are recommended to ensure the effective integration of theoretical neuroscientific evidence into teaching practice.

Attitude control of a novel regional truss-braced wing aircraft with low stability characteristics is addressed in this paper using Reinforcement Learning (RL). In recent years, RL has been increasingly employed in challenging applications, particularly, autonomous flight control. However, a significant predicament confronting discrete RL algorithms is the dimension limitation of the state-action table and difficulties in defining the elements of the RL environment. To address these issues, in this paper, a detailed mathematical model of the mentioned aircraft is first developed to shape an RL environment. Subsequently, Q-learning, the most prevalent discrete RL algorithm will be implemented in both the Markov Decision Process (MDP), and Partially Observable Markov Decision Process (POMDP) frameworks to control the longitudinal mode of the air vehicle. In order to eliminate residual fluctuations that are a consequence of discrete action selection, and simultaneously track variable pitch angles, a Fuzzy Action Assignment (FAA) method is proposed to generate continuous control commands using the trained Q-table. Accordingly, it will be proved that by defining an accurate reward function, along with observing all crucial states (which is equivalent to satisfying the Markov Property), the performance of the introduced control system surpasses a well-tuned Proportional–Integral–Derivative (PID) controller.

The COVID-19 outbreaks have caused universities all across the globe to close their campuses and forced them to initiate online teaching. This article reviews the pedagogical foundations for developing effective distance education practices, starting from the assumption that promoting autonomous thinking is an essential element to guarantee full citizenship in a democracy and for moral decision making in situations of rapid change, which has become a pressing need in the context of a pandemic. In addition, the main obstacles related to this new context are identified, and solutions are proposed according to the existing bibliography in learning sciences.

Accurate assessment of shale gas reserves hinges on a detailed characterization of gas and water distribution within shale reservoirs. Despite its importance, the nanoscale behavior of water and methane in deep shale formations, especially under elevated temperatures and pressures, remains poorly understood. This study proposes a novel molecular modeling approach to represent the complex nanocomposite porous media found in deep shale matrices. Leveraging quantitative data from experimental analyses of shale pore composition, we developed a molecular model that accurately reflects the intricate pore-slit structure within a composite of kerogen and illite, common constituents of shale. Employing a hybrid grand canonical Monte Carlo and molecular dynamics simulation technique, we investigated the micro-scale distribution and preferential adsorption sites of water and methane within the shale matrix. Our research further elucidates the impact of water on the pore structure of shale and delineates the co-occurrence patterns of water and methane. The simulations reveal that water and methane share similar adsorption preferences on kerogen surfaces, while methane does not exhibit specific adsorption preferences on water-bearing illite. We also find that the presence of water significantly alters the illite pore space, leading to a reduction in larger pore volumes and a concomitant increase in smaller pores. The decrease in methane content with increasing water content is more pronounced in the shrinkage cracks compared to the kerogen matrix pores and is particularly notable in the macropores of illite. The findings underscore the differential sensitivity of methane content to water levels across various shale pore types. These insights contribute to a deeper theoretical understanding of gas and water distribution mechanisms in deep shale reservoirs, offering valuable support for the evaluation of deep shale gas resource potential.

Autoencoders are neural networks that have applications in denoising processes. Their use is widely reported in imaging (2D), though 1D series can also benefit from this function. Here, three canonical waveforms are used to train a neural network and achieve a signal-to-noise reduction with curves whose noise energy was above that of the signals. A real-world test is carried out with the same autoencoder subjected to a set of time series corrupted by noise generated by a zener diode, biased on the avalanche region. Results showed that, observed some guidelines, the autoencoder can indeed denoise 1D waveforms usually observed in electronics, particularly square waves found in digital circuits.

With the rapid developments that have been made in computer vision and computer technology, semantic segmentation of high-resolution images has emerged as a mainstream and challenging task. The, segmentation of water areas remains a complex task due to the similar features between water areas or between water areas and other land objects. Meanwhile, since coastlines and riverbanks are typically presented in irregular shapes, it is difficult to obtain the categories of pixels at boundaries. This paper proposed the use of a Water-Land Boundary Attention Network (WLBANet) to improve the accuracy of pixels at boundaries between water and land. This network also reinforced the performance of contextual information extraction into distinguishing between water areas and other land objects. To prove the validity of this proposed network, WLBANet was performed on the Water Land Dataset (WLD), which is also by this paper, and which contains water areas and other land objects categories. The results demonstrates that the proposed method has significant effectiveness.

Conservation tillage and deep side-fertilization both hold the potential to reduce nitrogen leaching and improve grain yield and nitrogen use efficiency in fragrant rice cultivation practices. However, the combined impact of different tillage practices with deep side-fertilization on nitrogen leaching remains uncertain. Therefore, this study conducted on-site experiments for four rice growing seasons in both early and late seasons in 2018 and 2019, using the fragrant rice varieties "Meixiangzhan 2"(MX) and "Xiangyaxiangzhan"(XY). The four experimental treatments included:conventional tillage with regular fertilization (T1), conventional tillage with simultaneous deep fertilization (T2), reduced tillage with simultaneous deep fertilization (T3) , and no-tillage with simultaneous deep fertilization (T4). Our results indicate that the T4 treatment exhibited higher nitrogen leaching rates and potential nitrogen losses throughout the entire rice growth cycle, with a 4.51% increase in total nitrogen leaching and a 1.86% increase in potential nitrogen leaching compared to T1. In contrast, the T2 treatment demonstrated the lowest nitrogen leaching rate, resulting in a 6.01% reduction in total nitrogen leaching and a 9.57% decrease in potential nitrogen leaching compared to T1, demonstrating the most optimal performance. For MX, the T1 treatment resulted in lower daily grain outputs compared to the other treatments, with disparities ranging from 5.35% to 9.94%. Similarly, for the XY, the T1 treatment yielded significantly lower daily grain outputs compared to the other treatments, with discrepancies ranging from 6.26% to 10.81% during the late season of 2019. Overall, this study shows that conventional tillage with deep fertilization effectively reduces nitrogen leaching and boosts fragrant rice yields. Minimizing nitrogen leaching enhances nitrogen utilization efficiency. These insights highlight the significance of strategic fertilization and cultivation for environmental conservation and agricultural sustainability.

Retailers must have accurate sales forecasts to operate their businesses efficiently and effectively and to remain competitive in the marketplace. Global forecasting models like RNNs can be a powerful tool for forecasting in retail settings, where multiple time series are often interrelated and influenced by a variety of external factors. By including covariates in a forecasting model, we can better capture the various factors that can influence sales in a retail setting. This can help improve the accuracy of our forecasts and enable better decision-making for inventory management, purchasing, and other operational decisions. In this study we investigate how the accuracy of global forecasting models is affected by the inclusion of different potential demand covariates. To ensure the significance of the study's findings, we used the M5 forecasting competition's openly accessible and well-established dataset. The results obtained from the DeepAR models, which were trained on various combinations of features including time, price, events, and IDs, suggest that individually only the features corresponding to IDs improve the baseline model. However, when all the features are used together, the best performance is achieved, indicating that the individual relevance of each feature is emphasized when the information is given jointly. Comparing the model with features to the model without features, there is an improvement of 1.76\% for MRMSSE and 6.47\% for MMASE.

In urban areas, deep excavation-induced ground deformation may damage adjacent existing structures and is conventionally evaluated by levelling at installed settlement points. However, a small number of measurements cannot represent the total change in ground deformation adjacent to excavation sites. Furthermore, significant local subsidence may occur in places where settlement points have not been installed and only noticed after an accident. For deep excavation sites located in urban areas, paved pedestrian sidewalks are often located adjacent to sites, and construction activity can cause these paving blocks to displace. This study introduces a method to detect paving block displacement adjacent to deep excavation sites using terrestrial photogrammetry. A digital camera creating point cloud data (PCD) and an acquisition method satisfying the frontal and side overlap requirements were demonstrated. To investigate the displacement detection and measurement capabilities by PCD analysis, an experimental program was conducted, including a PCD comparison containing the uplift, settlement, and horizontal paving block displacement and reference data. The cloud-to-cloud distance computation algorithm was adopted for PCD comparison. Paving block displacement was detected for displacements of 5, 7.5, and 10 mm in the uplift, settlement, and horizontal directions; however, the horizontal displacements were less clear. PCD analysis enabled satisfactory measurements between 0.024 and 0.881 mm for the vertical-displacement cases, but a significant error was observed for the horizontal-displacement cases owing to the cloud-comparison algorithm. The measurement blind spot of limited settlement points was overcome by the proposed method that detected and measured paving block displacement adjacent to excavation sites.

Classical religious texts remain an essential part of human culture due to their undiminished influence on the advancement of civilization. Although their entirely divine origin is questioned repeatedly, explicit or implicit quoting and adherence to their basic guidelines are fundamental in modern society. In this respect, these documents’ inner structure and linguistic style appear to be pivotal. This paper considers the topic from the standpoint of small textual patterns classified using deep learning methods, traditionally applied to analyze short textual material like tweets. We divide the considered documents into small sequential chunks imitating tweets and categorizing them, classifying an entire text. The proposed method demonstrates that the religious text collections correspond to stable ”Twitter”-like structures that adequately reflect stylistic properties. So, concise word combinations seem to be an inborn textual attribute that adequately outlines the proposed multi-source authorship. This approach differs from traditional methods of analyzing classical religious documents, which are based on the consideration and interpretation of relatively long templates. The case study consists of three famous collections of Mosaic authorship in the Old Testament (Hebrew), Pauline authorship in the New Testament (Greek), and Al-Ghazali authorship (Arabic). The obtained results go well with most previously expressed evaluations and complement them with new implications, particularly in the authorship of two famous manuscripts attributed to Al-Ghazali.

The medial septum (MS), as part of the basal forebrain, supports many physiological functions, from sensorimotor integration to cognition. With often reciprocal connections with a broad set of peers at all major divisions of the brain, the MS orchestrates oscillatory neuronal activities throughout the brain. These oscillations are critical in generating sensory and emotional salience, locomotion, maintaining mood, supporting innate anxiety, and governing learning and memory. Accumulating evidence points out that the physiological oscillations under septal influence are frequently disrupted or altered in pathological conditions. Therefore, the MS may be a potential target for treating neurological and psychiatric disorders with abnormal oscillations (oscillopathies) to restore healthy patterns or erase undesired ones. Recent studies have revealed that the patterned stimulation of the MS alleviates symptoms of epilepsy. We discuss here that stimulus timing is a critical determinant of treatment efficacy on multiple time scales. On-demand stimulation may dramatically reduce side effects by not interfering with normal physiological functions. A precise pattern-matched stimulation through adaptive timing governed by the ongoing oscillations is essential to effectively terminate pathological oscillations. The time-targeted strategy for the MS stimulation may provide an effective way of treating multiple disorders including Alzheimer’s disease, anxiety/fear, schizophrenia, and depression, as well as pain.

In the concept of the process signature, the relationship between a material load and the modification remaining in the workpiece is used to better understand and optimize manufacturing processes. The basic prerequisite for this is to be able to measure the loads occurring during the machining process in the form of mechanical deformations. Speckle photography is suitable for this in-process measurement task and is already used in a variety of ways for in-plane deformation measurements. The shortcoming of this fast and robust measurement technique based on image correlation techniques is that out-of-plane deformations in the direction of the measurement system cannot be detected and increases the measurement error of in-plane deformations. In this paper, we investigate a method that infers local out-of-plane motions of the workpiece surface from the decorrelation of speckle patterns and is thus able to reconstruct three-dimensional deformation fields. The implementation of the evaluation method enables a fast reconstruction of 3D deformation fields, so that the in-process capability remains given. First measurements in a deep rolling process show that dynamic deformations underneath the die can be captured and demonstrate the suitability of the speckle method for manufacturing process analysis.

High temperatures (HT) and high hydrostatic pressures (HHP) are characteristic of deep-sea hydrothermal vents and other deep crustal settings. These environments host vast and diverse microbial populations, yet only a small fraction of those populations have been successfully cultured. This is due, in part, to the difficulty of sampling while maintaining these in situ conditions and also replicating those high-temperature and high-pressure conditions in the laboratory. In an effort to facilitate more HT-HHP cultivation, we present two HT-HHP batch culture incubation systems for cultivating deep-sea vent and subsurface (hyper)thermophilic microorganisms. One HT-HHP system can be used for batch cultivation up to 110 MPa and 121°C, and requires sample decompression during subsampling. The second HT-HHP system can be used to culture microorganisms up to 100 MPa and 160°C with variable-volume, pressure-retaining vessels that negate whole-sample decompression during subsampling. Here, we describe how to build cost effective heating systems for these two types of high-pressure vessels, as well as the protocols for HT-HHP microbial batch cultivation in both systems. Additionally, we demonstrate HHP transfer between the variable-volume vessels, which has utility in sampling and enrichment without decompression, laboratory isolation experiments, as well as HHP filtration.

Carbon dioxide capture and storage (CCS) is highly expected to be mitigating the discharges of carbon dioxide in a surrounding environment. Solvents are an integral part of CCS. So far, several solvents have been explored the interest of meeting the requirements such as accessibility, non-harmfulness, biocompatibility, recyclability, and inexpensiveness. However, most solvents face failure in fulfilling the requirements due to many factors, so, this review paper gives a brief discussion about another category of solvent, an analogue of ionic liquids (ILs) named deep eutectic solvent (DES). Extensive research has been done on DES in recent years because of their various attractive advantages, i.e., non-poisonousness, biodegradability, cheap cost and easy preparation, that make them as a promising green solvent for many industrial procedure and application, for instance, polymer synthesis, biodiesel treatment, green chemistry, electrochemistry etc. Therefore, this manuscript mainly focusses on CO2 capturing through DES in oil and gas field. In addition, the preparation and chemical structures of this novel solvent (DES) is also discussed. Moreover, a detailed study based on experimental solubility of CO2 in DESs is also reported in this article.

Deep brain stimulation (DBS) of the subthalamic nucleus (STN) has become an effective and widely used tool in the treatment of Parkinson’s disease (PD). STN-DBS has varied effects on speech. Clinical speech ratings suggest worsening following STN-DBS, but quantitative intelligibility, perceptual, and acoustic studies have produced mixed and inconsistent results. Improvements in phonation and declines in articulation have frequently been reported during different speech tasks under different stimulation conditions. Questions remain about preferred STN-DBS stimulation settings. Seven right-handed, native speakers of English with PD treated with bilateral STN-DBS were studied off medication at three stimulation conditions: stimulators off, 60 Hz (low frequency stimulation - LFS), and the typical clinical setting of 185 Hz (High frequency - HFS). Spontaneous speech was recorded in each condition and excerpts were prepared for transcription (intelligibility) and difficulty judgements. Separate excerpts were prepared for listeners to rate abnormalities in voice, articulation, fluency, and rate. Intelligibility for spontaneous speech was reduced at both HFS and LFS when compared to STN-DBS off. Speech produced at HFS was more intelligible than that produced at LFS, but HFS made the intelligibility task (transcription) subjectively more difficult. Both voice quality and articulation were judged to be more abnormal with STN-DBS on. STN-DBS reduced the intelligibility of spontaneous speech at both LFS and HFS but lowering the frequency did not improve intelligibility. Voice quality ratings with STN-DBS were correlated with the ratings made without stimulation. This was not true for articulation ratings. STN-DBS exacerbated an existing voice disorder and may have introduced new articulatory abnormalities.

We overview recent progress in growth aspects of group III-nitride heterostructures for deep ultraviolet (DUV) light-emitting diodes (LEDs), with particular emphasis on the growth approaches for attaining high-quality AlN and high Al-molar fraction AlGaN. The discussion commences with the introduction of the current status of group III-nitride DUV LEDs and the remaining challenges. This segues into discussion of LED designs enabling high device performance followed by the review of advances in the methods for the growth of bulk single crystal AlN intended as a native substrate together with a discussion of its UV transparency. It should be stated, however, that due to the high-cost of bulk AlN substrates at the time of this writing, the growth of DUV LEDs on foreign substrates such as sapphire still dominates the field. On the deposition front, the heteroepitaxial growth approaches incorporate high-temperature metal organic chemical vapor deposition (MOCVD) and pulsed-flow growth, a variant of MOCVD, with the overarching goal of enhancing adatom surface mobility, and thus epitaxial lateral overgrowth which culminates in minimization the effect of lattice- and thermal-mismatches. This is followed by addressing the benefits of pseudomorphic growth of strained high Al-molar fraction AlGaN on AlN. Finally, methods utilized to enhance both p- and n-type conductivity of high Al-molar fraction AlGaN are reviewed.

This study investigates the application of deep residual networks for predicting the dynamics of interacting three-dimensional rigid bodies. We present a framework combining a 3D physics simulator implemented in C++ with a deep learning model constructed using PyTorch. The simulator generates training data encompassing linear and angular motion, elastic collisions, fluid friction, gravitational effects, and damping. Our deep residual network, consisting of an input layer, multiple residual blocks, and an output layer, is designed to handle the complexities of 3D dynamics. We evaluate the network's performance using a dataset of 10,000 simulated scenarios, each involving 3-5 interacting rigid bodies. The model achieves a mean squared error of 0.015 for position predictions and 0.022 for orientation predictions, representing a 25% improvement over baseline methods. Our results demonstrate the network's ability to capture intricate physical interactions, with particular success in predicting elastic collisions and rotational dynamics. This work significantly contributes to physics-informed machine learning by showcasing the immense potential of deep residual networks in modeling complex 3D physical systems. We discuss our approach's limitations and propose future directions for improving generalization to more diverse object shapes and materials.

This review systematically examines the progression of the You Only Look Once (YOLO) object detection algorithms from YOLOv1 to the recently unveiled YOLOv10. Employing a reverse chronological analysis, this study examines the advancements introduced by YOLO algorithms, beginning with YOLOv10 and progressing through YOLOv9, YOLOv8, and subsequent versions to explore each version's contributions to enhancing speed, accuracy, and computational efficiency in real-time object detection. The study highlights the transformative impact of YOLO across five critical application areas: automotive safety, healthcare, industrial manufacturing, surveillance, and agriculture. By detailing the incremental technological advancements that each iteration brought, this review not only chronicles the evolution of YOLO but also discusses the challenges and limitations observed in each earlier versions. The evolution signifies a path towards integrating YOLO with multimodal, context-aware, and General Artificial Intelligence (AGI) systems for the next YOLO decade, promising significant implications for future developments in AI-driven applications.

Despite the increasing role of machine learning in various fields, very few works considered artificial intelligence for frequency estimation (FE). This work presents a comprehensive analysis of deep-learning (DL) approach for frequency estimation of single-tones. It is shown that DL network with two layers having a few nodes can estimate frequency more accurately than well-known classical techniques. The study is comprehensive, filling gaps of existing works, where it analyzes error under different signal-to-noise ratios, numbers of nodes, and numbers of input samples; also, under missing SNR information. It is found that DL-based FE is not significantly affected by SNR bias or number of nodes. DL-based approach can work properly using minimal number of input nodes N at which classical methods fail. It is possible for DL to use as little as two layers with two or three nodes each, with complexity of O{N} versus O{Nlog2 (N)} for DFT-based FE, noting that less N is required for DL. Hence, DL can significantly reduce FE complexity, memory, cost, and power consumption, making DL-based FE attractive for resource-limited systems like some IoT sensor applications. Also, reduced complexity opens the door for hardware-efficient implementation using short word-length (SWL) or time-efficient software-defined radio (SDR) communications.

This paper investigates the application of blended learning in undergraduate translation classes to enhance the effective incorporation of technology in teaching. Blended learning is the combination of face-to-face instruction with online learning, which provides students with a flexible and diverse learning environment for developing technological proficiency. Using a case study methodology, this research examines the translation undergraduate program at the University of Jeddah, which implemented blended learning as its primary instructional framework starting in 2021. The study aims to explore the advantages and challenges associated with the adoption of blended learning in translation classes while offering practical suggestions that could help in its implementation. The findings show several advantages of integrating blended learning into undergraduate translation classes. Firstly, the students could benefit from a flexible learning environment that accommodates their individual learning preferences and schedules. Secondly, It also helps to promote active engagement and interaction which nurture collaborative learning opportunities among students. Thirdly and lastly, blended learning provides a platform for students to develop their technological skills, which become crucial in today's digital age. Despite this, the study also points out significant challenges that need to be addressed. These important challenges include the required planning and preparation involved in creating effective online components, ensuring equitable access to technology and the internet, and adapting teaching and learning approaches to optimise the blended learning experience.To sum up, this paper contributes to the understanding of blended learning in the context of undergraduate translation classes.

BackgroundThe present review summarizes the state-of-the-art of in silico methods and techniques that are the most useful in drug discovery, their relationship with data science, as well as the successful application of data science, machine learning (ML) and artificial intelligence (AI) applications. A meta-analysis of the various technologies available is furthermore proposed as a guideline for the non-expert, reader relative to the several subject areas is also discussed in this article. The scope of this meta-analysis is to rank the enlisted technologies by their field of applications and to depict the latter according to knowledge accessibility, from students to experts.Method The search strategy utilized for this review first produced a general collection of 900 papers without duplications, which were subsequently streamlined and divided into two independent collections: the top 300 most-cited papers of all time (since 2000) and the papers with the highest interest for a systematic review analysis (high-impact exciting papers). Results In Part 1, we discuss the most cited and quality 97 articles in these top 300 papers most relevant to the field of in silico drug discovery. The different disciplines are listed according to their industrial and economic incurred to society, independently from the “metric” results of how many new drug approvals (NDAs) each discipline has generated to date.ConclusionBig data, the ensemble of known items stored in publicly available databases, has improved our understanding of the many fates of a potential drug candidate during its development and even after its commercialization. Moreover, the combination of new screening techniques and “omics” with old drugs has led to a new paradigm in which the unknown knowledge of any biological molecule and its cellular structure, now plays an important role as a target for a series of yet-to-be-developed drugs: the chemical space. Furthermore, leveraging big data, data science, ML, and AI can revolutionize drug discovery by swiftly analyzing massive datasets, predicting efficacy and safety profiles, streamlining development, cutting costs, and boosting success rates for new drugs. AI also speeds up the search for promising drug candidates, advancing innovative therapies.

Solar radiation corresponds to fundamental parameters for solar photovoltaic (PV) technology. Reliable solar radiation prediction became valuable to design solar PV systems, performance, operatively efficient planning, safety operation, grid dispatch and financial characteristics. However, high quality ground-based solar radiation measurements are scarce, especially for very short-term time horizon. Most of the existent studies trained the machine learning (ML) model used dataset with time horizon of 1-hour or day, very fewer studies have been reported using a dataset with a 1-mitute time horizon. In this study, a comprehensive evaluation of nine ensemble learning algorithms (ELA) is performed to estimate the solar radiation in Santo Domingo with a 1-minute time horizon dataset collected from a local weather station. The ensemble learning evaluated included seven homogeneous ensembles; Random Forest (RF), Extra Tree (ET), Adaptive Gradient Boosting (AGB), Gradient Boosting (GB), Extreme Gradient Boosting (XGB), Light Gradient Boosting (LGBM), Histogram-based Gradient Boosting (HGB) and heterogeneous ensemble named as Voting and Stacking. RF, ET, GB, HGB were combined to develop Voting and Stacking and Linear Regression (LR) was adopted in the second layer of the Stacking. Five technical metrics, Mean Squared Error (MSE), Root Mean Squared Error (RMSE), Mean Absolute Error (MAE), Mean Absolute Percentage Error (MAPE) and Coefficient of Determination (R2) were used as criteria to determine the prediction quality of the developed ensemble algorithms. Comparison of the results indicates that the HGB algorithm offers superior prediction performance among the homogeneous ensemble learning and overall, the Stacking provides the best accuracy with metric values of MSE=3218.27, RMSE= 56.73, MAE=29.87, MAPE=10.60, R2=0.964.

The period of the COVID-19 pandemic resulted in a rapid development of innovative education methods, in particular using e-learning and remote work tools. The effects of this development are also post-pandemic changes in formal teaching regulations, in particular in higher education, allowing classes and lectures to be carried out with Blended Learning or Flipped Classroom methods. This paper provides information about a case study of implementing ICT technologies with elements of the mentioned methods in one of the subjects at a technical university. The implemented tools and solutions in the field of e-learning and interactivity are presented, along with information regarding their perception by students during two academic years in the post-COVID-19 period. The analysis of results of these information and student evaluations indicates their generally positive approach to such innovations in the educational path, and at the same time shows significant challenges for teachers to increase the attractiveness and effectiveness of the teaching process and the development of practical, technical skills of students.

The use of artificial intelligence in natural language processing (NLP) has significantly contributed to the advancement of natural language applications such as sentimental analysis, topic modeling, text classification, chatbots, and spam filtering. With a large amount of text generated each day from different sources such as webpages, blogs, emails, social media, and articles, one of the most common tasks in natural language processing is the classification of a text corpus. This is important in many institutions for planning, decision-making, and archives of their projects. Many algorithms exist to automate text classification operations but the most intriguing of them is that which also learns these operations automatically. In this study, we present a new model to infer and learn from data using probabilistic logic and apply it to text classification. This model, called GenCo, is a multi-input single-output (MISO) learning model that uses a collaboration of partial classifications to generate the desired output. It provides a heterogeneity measure to explain its classification results and enables the reduction of the curse of dimensionality in text classification. The classification results are compared with those of conventional text classification models, and it shows that our proposed model has a higher classification performance than conventional models.

Pandemic scenario has significantly changed several factors of life, including teaching, and learning at university. The development of suitable teaching materials to support university studies is mandatory to overcome distance learning difficulties and improve traditional teaching methodologies. This work explains a novel method for the preparation of teaching materials for medical sciences, but also plausible for other learning fields. An encephalon was extracted and prepared by using this methodology for teaching purposes. More than 200 students evaluated several factors of the material prepared this way, indicating a better understanding (up to 80%) of theoretical contents related to this human section, together with a high usability and good physical appearance

Increased proliferation of IT services in all sectors has reinforced the adoption and diffusion across all levels of education and training institutions. However, lack of awareness of and knowledge about the key challenges and opportunities of elearning, seem to allude policymakers, resulting in low adoption or increased failure rate of many e-learning projects. Our study tries to address this problem through a review of relevant literature in e-learning. Our goal was to draw from the existing literature, insights into the opportunities and challenges of e-learning diffusion, and the current state-of-research in the field. To do this, we employed a systematic review of literature on some of the salient opportunities and challenges of e-learning innovation for educational institutions. These results aimed to inform policymakers and suggest some interesting issues to advance the research and adoption and diffusion of e-learning. Moreover, the bibliometric analysis shows that the field is experiencing high research attraction among scholars. However, several research areas in the field witnessed relatively low research paucity. Based on these findings, we discussed topics for possible future research.

The Blue Economy is a multi-layered economy in its content, although it only reflects the relation between sea and business. Shipping is an essential part of it and with the largest market share. Sustainable shipping, however, requires the sustainability of a number of components that make it up. One of them, and perhaps the most important, is the training of marine personnel and in particular ship’s crew. Education is a key process that does not complete with graduation in the educational institution, as the foundations of professional training are laid there. An increasingly common practice by shipping companies is postgraduate training as ship officer seminars and refresher courses. This article investigates the results of surveys and interviews with officers and engineers from various shipping companies regarding the effectiveness of this type of training. A detailed analysis of strengths and weaknesses in the context of the principles of andragogy science and the Lifelong Learning strategy is in order. The article summarizes author’s experience from their sea practice as officers of the watch and Masters on board of merchant vessels and participants in postgraduate education and training as well.

Background and Objective: Diabetes Mellitus is a long-term, multifaceted metabolic condition that necessitates ongoing medical management. Hypogonadism is a syndrome that is a clinical and/or biochemical indicator of testosterone deficiency. Cross-sectional studies have reported that 20-80.4 % of all men with Type 2 diabetes have hypogonadism, and Type 2 diabetes is related with low testosterone. This study presents an analysis of the use of ML and EL classifiers in predicting testosterone deficiency. In our study, we compared optimized traditional ML classifiers and three EL classifiers using grid search and stratified k-fold cross-validation. We used the SMOTE method for the class imbalance problem. Methods: This database contains 3397 patients for the assessment of testosterone deficiency. Among these patients, 1886 patients with type 2 diabetes were included in the study. In the data pre-processing stage, firstly outlier/excessive observation analyses were performed LOF and missing value analyses were performed with random forest. The SMOTE is a method for generating synthetic samples of the minority class. Four basic classifiers, namely MLP, RF, ELM and LR, were used as first level classifiers. Tree ensemble classifiers, namely ADA, AGBoost, and SGB, were used as second level classifiers. Results: After SMOTE, while the diagnostic accuracy decreased in all base classifiers except ELM, sensitivity values increased in all classifiers. Similarly, while the specificity values decreased in all classifiers, F1 score increased. The RF classifier gave more successful results on the base-training dataset. The most successful ensemble classifier in the training dataset was the ADA classifier in the original data and in the after SMOTE data. The testing data, XGBoost is the most suitable model for your intended use in evaluating model performance. XGBoost, which exhibits a balanced performance especially when SMOTE is used, can be preferred to correct class imbalance. Conclusions: SMOTE is used to correct the class imbalance in the original data. However, as seen in this study, when SMOTE was applied, the diagnostic accuracy decreased in some models, but the sensitivity increased significantly. This shows the positive effects of SMOTE to better predict the minority class.

Tackling the intricacies of network dismantling in complex systems poses significant challenges. This task has relevance across various practical domains, yet traditional approaches focus primarily on singular metrics, such as the number of nodes in the Giant Connected Component (GCC) or average pairwise connectivity. In contrast, we propose a unique metric that concurrently targets nodes with the highest degree and reduces the GCC size. Given the NP-hard nature of optimizing this metric, we introduce MaxShot, an innovative end-to-end solution that leverages graph representation learning and reinforcement learning. Through comprehensive evaluations on both synthetic and real-world datasets, our method consistently outperforms leading benchmarks in accuracy and efficiency. These results highlight MaxShot’s potential as a superior approach to address the network dismantling problem effectively.

This paper provides a structured and practical roadmap for practitioners to integrate Learning from Demonstration (LfD) into manufacturing tasks, with a specific focus on industrial manipulators. Motivated by the paradigm shift from mass production to mass customization, it is crucial to have an easy-to-follow roadmap for practitioners with moderate expertise, to transform existing robotic processes to customizable LfD-based solutions. To realize this transformation, we devise the key questions of "What to Demonstrate", "How to Demonstrate", "How to Learn", and "How to Refine". To follow through these questions, our comprehensive guide offers a questionnaire-style approach, highlighting key steps from problem definition to solution refinement. The paper equips both researchers and industry professionals with actionable insights to deploy LfD-based solutions effectively. By tailoring the refinement criteria to manufacturing settings, the paper addresses related challenges and strategies for enhancing LfD performance in manufacturing contexts.

This research delves into librarians' perceptions of artificial intelligence (AI) support in learning experiences, lifelong learning, and digital literacy within the library context, undertaking a comparative analysis between Malaysia and Indonesia. Employing a survey methodology, a self-developed questionnaire was administered to 59 librarians in Malaysia and 85 in Indonesia. The questionnaire, utilizing a Likert scale, systematically explored subjective judgments on AI's impact across various dimensions. A noteworthy finding is the consistent and harmonized perception among librarians in both countries, underscoring a universal recognition of AI's perceived support for learning experiences, lifelong learning, and digital literacy. Of particular interest is the emphasis on sustainability in librarians' perspectives, as they recognize the enduring value of AI in fostering educational growth. Despite the limitations inherent in perceptual measures and a relatively modest sample size, the empirical and practical contributions of this study are significant. It offers a nuanced exploration of librarians' viewpoints, providing valuable insights for future research endeavors. Moreover, the study's findings have immediate practical implications for the integration of AI tools in library services, policy-making, and professional development, with a focus on ensuring sustainable implementation for long-term benefits.

This study explores the dependence of drone acoustic detection systems performance on distance, using learning machines with different complexities, from simple linear discriminants, to deep neural networks, such as YAMNet, which exploits transfer learning. Other machine learning systems studied are the multilayer perceptron, support vector machines and random forest. These methods have been evaluated with a meticulously selected database that includes a wide variety of drone and interference sounds, previously processed by array signal processing and affected by ambient noise. Two strategies for training learning machines are considered. In the first one, they are trained with unattenuated signals, trying to preserve the information generated by the sound sources, but they are tested considering the attenuation with distance, achieving effective detection at distances up to 200 metres with some methods, especially linear discriminant. In all cases, the existence of interferences that hinder detection is considered. In the second strategy, the systems are trained and tested with attenuated signals as a function of distance. The effective detection range increases up to 300 metres for most methods and up to 500 metres for the YAMNet based detector. In addition, this second approach raises the possibility of developing specialised detectors for each distance range, thus significantly extending the effective detection range. These results underline the promising potential of acoustic detection of drones at various distances, encouraging further exploration in this research area.

This article focuses on artificial intelligence in educational technology, starting with an introduction to educational technology, an interdisciplinary field of study that covers the design, development, utilization, and evaluation of technology and digital tools in educational Settings. A detailed description of its definition in an academic context - a multidisciplinary field of computer science and cognitive science that deals with the development of computational systems that exhibit intelligent behaviour, describing its areas of coverage and scope of application. It then introduces the benefits of AI in education technology, specifically addressing personalized learning, adaptive learning systems, automated scoring and feedback, virtual tutors and chatbots, data analytics, as well as content recommendations and natural language processing, accessibility and inclusion. Then it introduces the main concepts of AI personalized learning: AI personalized learning uses the power of artificial intelligence to meet the unique needs and preferences of individual learners, as well as its key principles and main characteristics. Adaptive learning systems harness the power of artificial intelligence and data analytics to tailor the learning experience to each student's needs and abilities, as well as its core principles and strengths. It also introduces the main operating principles of automated grading and feedback: it uses artificial intelligence and computer algorithms to evaluate and evaluate student assignments, tests and exams without the direct involvement of human graders, and its associated benefits. Secondly, the main concepts of virtual tutor are introduced: Virtual tutor is a computer-based system that uses artificial intelligence and machine learning algorithms to provide students with personalized and interactive educational support and its key characteristics and main advantages, and then the nature and benefits of chatbots and help in the field of education. The final conclusion summarizes the benefits and future challenges of integrating AI into educational technology.

Online education allows learners to develop knowledge and skills flexibly and conveniently—such observation among students whose characteristics involve student engagement, self-regulation, and self-efficacy. However, studies to characterize Filipino online learners seem lacking. Thus, this study aimed to characterize science education tertiary students in the Philippines concerning their online student engagement (OSE), self-regulated learning (SRL), and online learning self-efficacy (OLSE). The unprecedented events brought by COVID-19 pandemic also urged the implementation of online modalities while there is no available information on students’ online learning profiles. Hence, researchers used a survey research employed through ex post facto approach to determine the effects of the demographic profile on OSE, SRL, and OLSE. The survey was participated by N=373 respondents who answered the questionnaire with informed consent administered via Google Forms. Results revealed that OSE indicators moderately characterized students, while SRL and OLSE indicators are true of them, substantiated by the overall mean M=3.85(SD=0.90), M=3.86(SD=0.92), and M=3.14(SD=0.73), respectively. Also, multivariate tests showed no significant effect among the independent groups (p>0.05), except for gender and OLSE interaction (p<0.05) so, only in OLSE was a significant difference found in gender. In conclusion, Filipino online learners are moderate across aspects of student engagement, self-regulation, and self-efficacy.

The Pandemic in 2019 forced a digital adaptation with direct consequences on all educational stakeholders. On behalf of teachers and trainers, while many regarded these changes with some scepticism, others embraced the opportunity to integrate technology into their teaching methods and as learning resources. As translation trainers, it is essential to follow and understand the translation market. Thus, the exponential changes that digital technology has brought to this sector over the years impose constant shifts in teaching and learning methods and resources. In fact, translators require vast competencies, amongst which is the flexibility to adapt. In translation training Project-Based Learning (PBL) has been established as an essential teaching and learning method, as it has proven to foster the development of competencies as it simulates the translator's work environment. Thus, the need to adapt new strategies reinforced PBL and its benefits. PBL, however, similar to a freelance translator, places the student in the centre of the learning process, where self-regulation becomes essential, as it is necessary to analyse the market/situation and be flexible enough to adapt to the context accordingly. As of 2018-2019, technical translation courses at ISCAP have implemented PBL as their main teaching and learning method. At the same time, a study on student self-regulation began. The purpose was to understand student perception on their own self-regulation competence and its development or lack thereof after one year of PBL. Results indicate that PBL is seen as a useful simulation of the translation labour market and that it does enhance many essential competences, amongst which is student self-regulation.

When bioprospecting for novel industrial enzymes, substrate promiscuity is a desirable property that increases the reusability of the enzyme. Among industrial enzymes, ester hydrolases have great relevance for which the demand has not ceased to increase. However, the search for new substrate promiscuous ester hydrolases is not trivial since the mechanism behind this property is greatly influenced by the active site's structural and physicochemical characteristics. These characteristics must be computed from the 3D structure, which is rarely available, and expensive to measure, hence the need for a method that can predict promiscuity from a sequence alone. Here we report such a method called EP-pred, an ensemble binary classifier, that combines three machine learning algorithms: SVM, KNN, and a Linear model. EP-pred has been evaluated against the Lipase Engineering Database together with a hidden Markov approach leading to a final set of 10 sequences predicted to encode promiscuous esterases. Experimental results confirmed the validity of our method since all ten proteins were found to exhibit a broad substrate ambiguity.

Automatic ship detection provides an essential function towards maritime domain awareness for security or economic monitoring purposes. This work presents an approach for training a deep learning ship detector in Sentinel-2 multispectral images with few labeled examples. We design a network architecture for detecting ships with a backbone that can be pre-trained separately. By using Self Supervised Learning, an emerging unsupervised training procedure, we learn good features on Sentinel-2 images, without requiring labeling, to initialize our network’s backbone. The full network is then fine-tuned to learn to detect ships in challenging settings. We evaluated this approach versus pre-training on ImageNet and versus a classical image processing pipeline. We examined the impact of variations in the self-supervised learning step and we show that in the few-shot learning setting self-supervised pre-training achieves better results than ImageNet pre-training. When enough training data is available, our self-supervised approach is as good as ImageNet pre-training. We conclude that a better design of the self-supervised task and bigger non-annotated dataset sizes can lead to surpassing ImageNet pre-training performance without any annotation costs.

Distance learning has assumed a relevant role in the Educational scenario. The use of Virtual Learning Environments contributes to obtain a substantial amount of educational data. In this sense, the analyzed data generate knowledge used by institutions to assist managers and professors in strategic planning and teaching. The discovery of students’ behaviors enables a wide variety of intelligent services for assisting in the learning process. This article presents a literature review in order to identify the intelligent services applied in distance learning. The research covers the period from January 2010 to May 2021. The initial search found 1,316 articles, among which 51 were selected for further studies. Considering the selected articles, 33% (17/51) focus on learning systems, 35% (18/51) propose recommendation systems, 26% (13/51) approach predictive systems or models, and 6% (3/51) use assessment tools. This review allowed to observe that the principal services offered are recommendation systems and learning systems. In these services, the analysis of student profiles stands out to identify patterns of behavior, detect low performance and identify probabilities of dropouts from courses.

Machine learning has become an increasingly ubiquitous technology, as big data continues to inform and influence everyday life and decision-making. Currently in healthcare, as well as in most other industries, the two most prevalent machine learning paradigms are supervised learning and transfer learning. Both practices rely on large-scale, manually annotated datasets to train increasingly complex models. However, the requirement of data to be manually labeled leaves an excess of unused, unlabeled data available in both public and private data repositories. Self-supervised learning (SSL) is a growing area of machine learning that has the ability to take advantage of unlabeled data. Contrary to other machine learning paradigms, SSL algorithms create artificial supervisory signals from unlabeled data and pretrain algorithms on these signals. The aim of this review is two-fold: firstly, we provide a formal definition of SSL, divide SSL algorithms into their four unique subsets, and review the state-of-the-art published in each of those subsets between the years of 2014-2020. Second, this work surveys recent SSL algorithms published in healthcare, in order to provide medical experts with a clearer picture of how they can integrate SSL into their research, with the objective of leveraging unlabeled data.

Melanoma is considered the most serious and aggressive type of skin cancer, and metastasis appears to be the most important factor in prognosticating this type of cancer. With the emergence of new therapeutic strategies for metastatic melanoma that have shown improvement in patient survival, we developed a transfer learning-based biomarker discovery model that could help in the diagnosis and prognosis of this disease. After applying it to the ensemble machine learning model, results reveal that the genes we found show consistency with other methodologies previously applied to the same TCGA (The Cancer Genome Atlas) data set, and our methods found novel biomarker genes as well. Our ensemble model achieved Area Under the Receiver Operating Characteristic (AUC) of 0.9861, an accuracy of 91.05, and an F1 score of 90.60 using an independent validation data set. This study was able to identify potential genes for diagnostic classification (C7 and GRIK5) and diagnostic and prognostic biomarkers (S100A7, S100A7, KRT14, KRT17, KRT6B, KRTDAP, SERPINB4, TSHR, PVRL4, WFDC5, IL20RB). We also assessed the potential sources of bias for our model and confirmed some of them by the model's performance.

Generation Y is known as job jumpers because of the desire to earn a higher salary, career opportunities and opportunities to develop themselves. One type of work is a teacher because by becoming a teacher they get a better life, one of which is by getting extra income from the government for those who already have teacher certification, this is what encourages Generation Y to choose this profession. this study uses crosstabs for the data analysis process because the data comes from the LMS database owned by XYZ Campus. Millennial educators who have the highest performance value of PJJ Information Systems for Information System Engineering Cluster with a value of 5.19. The impact of transactions on millennial lecturers on students is able to fulfill any given workload. Appreciate millennial lecturers in tangible and intangible forms.

The Norwegian Museum of Science and Technology have developed a learning concept for school classes in science centres named ‘learning trails’. In this concept, groups of students perform a series of thematically related experiments with installations in the science centre. The learning trails are designed to support the generic learning outcomes for science centre visits. We argue for using the previously developed Engagement Profile in an indicator to determine both media forms and generic learning outcomes for such learning concepts. Further, we implemented the learning trails in two modes: one mode used paper-based content to guide the students, while the other mode supported the use of tablet PCs where engaging content is triggered when the students approach the location of an experiment in the learning trail. We studied the engagement factors of the learning trails and observed how school classes use these. In a study with 113 students from lower secondary school, they answered short questionnaires that were integrated into the implementation of the learning trails. While the concept of the learning trails was evaluated positively, we could not find significant differences in how engaging the two implemented modes were.

The value of landscape, as part of collective heritage, can be acquired by GIS due to the multilayer approach of the spatial configuration. Proficiency in geospatial technologies in order to collect, process, analyze, interpret, visualize and communicate geographic information is being increased by undergraduate and graduate students, but in particular by those who are training to become geography teachers at secondary education. This training can be carried out through personalized learning and distance learning methodology. Personalized GIS education aims to integrate students and enhance their understanding of landscape. Some teaching experiences are shown whereby opportunities offered by WebGIS will be described, through quantitative tools and techniques that will allow this modality of learning and improve its effectiveness. Results of this research show that students, through geospatial technologies, learn landscape as a diversity of elements but also the complexity of physical and human factors involved. Several conclusions will be highlighted: i) the contribution of geospatial training to education for sustainable development; ii) spatial analysis as a mean of skills acquisition about measures for landscape conservation; iii) expanding and applying acquired knowledge to other geographic spaces and different landscapes.

This article focuses on developing a continuous authentication system using behavioral biometrics to recognize users accessing computing devices. The user’s distinct behavioral biometric is captured through keystroke dynamics, and reward-based reinforcement learning (RL) ideas are applied to recognize them throughout the session. The suggested system adds an extra layer of security to traditional authentication methods, forming a robust continuous authentication system that can be added to static authentication systems. The methodology involves training a RL model to detect unusual user typing patterns and flag suspicious activity. Each user has an agent trained on their historical data, which is preprocessed and used to create episodes for the agent to learn from. The environment involves fetching observations and randomly corrupting them to learn out-of-order behavior. The observation vector includes both running features and summary features. The re-ward function is binary and minimalistic. The Principal Component Analysis (PCA) model is used to encode the running features, and the Double Deep Q-Network (DDQN) algorithm with a fully connected neural network is used as the policy net. The evaluation achieved an average training accuracy and EER (equal error rate) of 94.7% and 0.0126 and test accuracy and ERR of 81.06% and 0.0323 for all users when the number of encoder features was increased. Therefore, it is concluded that by continuously learning and adapting to changing behavior patterns, this approach can provide more secure and personalized authentication, lowering the possibility of unauthorized access and cyberattacks. Overall, the use of reinforcement learning and behavioral biometrics for continuous authentication has the potential to significantly enhance security in the digital age and are effective in identifying each user.

Appropriate estimation of soil settlement is of significant importance since it directly influences the performance of building and infrastructures that are built on soil. In particular, the settlement of fine-grained soils is critical because of low permeability and continuous settlement with time. Coefficient of consolidation (Cc) is a key parameter to estimate settlement of fine-grained soil layers. However, estimation of this parameter is time consuming, needs skilled technicians, and specific equipment. In this study, Cc was estimated using several soil parameters such as liquid limit (LL), plastic limit (PL), and initial void ratio (e0). Estimating such parameters in laboratory is straight forward and needs substantially less time and cost compared to conventional tests to estimate Cc such as Oedometer test. This study presents a novel prediction model for Cc of fine-grained soils using gene-expression programming (GEP). GEP is a biologically inspired technique capable of offering closed-form solution for the optimal solution. A database consisted of 108 different data points was used to develop the model. A closed-form equation solution was derived to estimate Cc based on LL, PL, and e0. The performance of developed GEP-based model was evaluated through coefficient of determination (R2), root mean squared error (RMSE), and mean average error (MAE). High R2 and low error values indicated the descent performance of the model. Furthermore, the model was evaluated using the additional performance measures and met all the suggested criteria. Furthermore, the model had a better performance in terms of R2, RMSE, and MAE compared to most of existing models. It is expected that the developed model will decrease the time and cost associate with determining Cc of fine-grained soils.

Appropriate estimation of soil settlement is of significant importance since it directly influences the performance of building and infrastructures that are built on soil. In particular, the settlement of fine-grained soils is critical because of low permeability and continuous settlement with time. Coefficient of consolidation (C_c) is a key parameter to estimate settlement of fine-grained soil layers. However, estimation of this parameter is time consuming, needs skilled technicians, and specific equipment. In this study, C_c was estimated using several soil parameters such as liquid limit (LL), plastic limit (PL), and initial void ratio (e₀). Estimating such parameters in laboratory is straight forward and needs substantially less time and cost compared to conventional tests to estimate C_c such as oedometer test. This study presents a novel prediction model for C_c of fine-grained soils using gene-expression programming (GEP). GEP is a biologically inspired technique capable of offering closed-form solution for the optimal solution. A database consisted of 108 different data points was used to develop the model. A closed-form equation solution was derived to estimate C_c based on LL, PL, and e₀. The performance of developed GEP-based model was evaluated through coefficient of determination (R²), root mean squared error (RMSE), and mean average error (MAE). High R² and low error values indicated the descent performance of the model. Furthermore, the model was evaluated using the additional performance measures and met all the suggested criteria. Furthermore, the model had a better performance in terms of R², RMSE, and MAE compared to most of existing models. It is expected that the developed model will decrease the time and cost associate with determining C_c of fine-grained soils.Keywords: evolutionary model, gene-expression programming (GEP), prediction, soil compression index, estimation, soil engineering, soil informatics, civil engineering, machine learning, data science, big data, soft computing, deep learning, forecasting, subject classification codes, construction informatics, computational intelligence (CI), artificial intelligence (AI), estimation

Computers have evolved over the years and as the evolution continues, we have been ushered into an era where high-speed internet has made it possible for devices in our homes, hospital, energy and industry to communicate with each other. This era is what is known as the Internet of Things (IoT). IoT has several benefits in the health, energy, transportation and agriculture sectors of a country’s economy. These enormous benefits coupled with the computational constraint of IoT devices which makes it difficult to deploy enhanced security protocols on them make IoT devices a target of cyber-attacks. One approach that has been used in traditional computing over the years to fight cyber-attacks is Intrusion Detection System (IDS). However, it is practically impossible to deploy IDS meant for traditional computers in IoT environments because of the computational constraint of these devices. In this regard, this study proposes a lightweight IDS for IoT devices using an incremental ensemble learning technique. We used Gaussian Naive Bayes and Hoeffding tree to build our incremental ensemble model. The model was then evaluated on the TON IoT dataset. Our proposed model was compared with other state-of-the-art methods proposed and evaluated using the same dataset. The experimental results show that the proposed model achieved an average accuracy of 99.98\%. We also evaluated the memory consumption of our model which showed that our model achieved a lightweight model status of 650.11KB as the highest memory consumption and 122.38KB as the lowest memory consumption.

As a combination of both concepts of innovation and environmental development, green innovation is of great significance to the sustainable development of the country and industry. Previous literatures have found the separate roles of green entrepreneurial orientation and inter-organizational learning in understanding green innovation issues. However, few studies have done a comprehensive analysis of integrating three streams of research: green entrepreneurial orientation, green innovation and supply chain learning capability. Based on the resource-based view and dynamic capability theory, we examine the direct of green entrepreneurial orientation on green innovation as well as indirect effect through the mediation of supply chain learning capability. Meanwhile, an empirical data set of 228 manufacturing companies in China (Shaanxi, Guangdong, Hebei, Jiangsu, and Shandong) was used to test our hypotheses. Findings from our empirical study suggest that supply chain learning capability partially mediates the positive relationships between green entrepreneurial orientation and its two consequences—green incremental innovation and green radical innovation. In addition, this research implies that when enterprise has a strong green entrepreneurial orientation, the enterprise should make an effort to enhance the level of supply chain learning capability so as to fully develop their green innovation.

Lung and colon cancers are among the leading causes of cancer-related mortality worldwide. Early and accurate detection of these cancers is crucial for effective treatment and improved patient outcomes. False or incorrect detection is more harmful. Accurately detecting cancer in a patient's tissue is crucial to their effective treatment. While analyzing tissue samples is complicated and time-consuming, deep learning techniques have made it possible to complete this process more efficiently and accurately. As a result, researchers can study more patients in a shorter amount of time and at a lower cost. Much research has been conducted to investigate deep learning models that require great computational ability and resources. However, None of these have had a 100% accurate detection rate for these life-threatening malignancies. Misclassified or falsely detecting cancer can have more harmful consequences. This research proposes a new lightweight, parameter-efficient, and mobile-embedded deep learning model based on a 1D convolutional neural network with Squeeze-and-Excitation layers for efficient lung and colon cancer detection. This proposed model diagnoses and classifies lung squamous cell carcinomas and adenocarcinoma of the lung and colon from digital pathology images. Extensive experiment demonstrates that our proposed model achieves 100% accuracy for detecting lung, colon, and lung and colon cancers from the histopathological (LC25000) lung and colon datasets, which is considered the best accuracy for around 0.35 million trainable parameters and around 6.4 million flops. Compared with the existing results, our proposed architecture shows state-of-the-art performance in lung, colon, and lung and colon cancer detection.

Bixonimania, a rare hyperpigmentation disorder characterized by a distinctive pink hue on the eyelids, presents a significant diagnostic challenge due to its unique presentation and limited research. This study explores the application of machine learning algorithms for bixonimania detection by analyzing millions of images of individuals exposed to blue light (500-700 nm spectrum). Our findings suggest a potential link between blue light exposure and bixonimania, affecting roughly 1 in 90,000 individuals. The proposed machine learning model achieved an accuracy of 92% in detecting bixonimania based on eyelid hue analysis. This study paves the way for further exploration of bixonimania's underlying causes, improved diagnostic tools, and potential treatment options.

Most popular machine learning algorithms like k-nearest neighbour, k-means, SVM uses a metric to identify the distance(or similarity) between data instances. It is clear that performances of these algorithm heavily depends on the metric being used. In absence of prior knowledge about data we can only use general purpose metrics like Euclidean distance, Cosine similarity or Manhattan distance etc, but these metric often fail to capture the correct behaviour of data which directly affects the performance of the learning algorithm. Solution to this problem is to tune the metric according to the data and the problem, manually deriving the metric for high dimensional data which is often difficult to even visualize is not only tedious but is extremely difficult. Which leads to put effort on \textit{metric learning} which satisfies the data geometry.Goal of metric learning algorithm is to learn a metric which assigns small distance to similar points and relatively large distance to dissimilar points.

The evaluation of wrinkles in deep-drawn fiber-based materials is crucial for the assessment of product quality and the optimization of manufacturing processes. Wrinkles, a common phenomenon in deep-drawing paper materials with high drawing depths, significantly impair the appearance and mechanical properties of the final product. The objective of this study is to identify the key process parameters affecting wrinkling and to deepen the understanding of their roles and interactions using wrinkle data for deep-drawn paper products. Image analysis techniques are employed, supported by a specially constructed darkroom platform to ensure uniform light intensity for capturing photographs. An automated program is developed for the detection and evaluation of wrinkle characteristics and distribution, which allows the free choice of the region to be detected and the representation of the wrinkle geometry not limited by the number. To enhance the precision of this program, the ellipticity is initially rectified for products without flanges, specifically cup-shaped deep-drawn products. The ellipticity is caused by the pronounced springback effect of the paperboard. The approach is employed to investigate the impact of material properties, blank holder force, drawing depth, drawing clearance, and punch speed on wrinkling formation after the deep drawing process. The findings reveal that the blank holder force and drawing clearance are critical factors in wrinkle formation, with higher forces generally leading to increased wrinkle numbers.

Robot grasp modeling and implementation is one of essential abilities for a robot with embodied artificial intelligence. However, most existing deep learning-based grasp methods suffer a large number of parameters and heavy computation overheads. To address this issue, by fully exploiting the complementary capabilities of both CNNs and Transformers, we propose a smart grasp deep network with one-way fusion strategy via context path and spatial path (SGNet), which enjoys a lightweight structure, fast inference speed and easy deployment on devices with limited computation resources. Specifically, the context path employs lightweight depthwise separable convolution to achieve fast down-sampling while a novel DSFormer module mainly by integrating Transformer is to extract global and context-rich features. The spatial path efficiently fuses feature information from the context path in one-way manner and generate high-resolution feature maps via point-by-point convolution operations. Experimental results show the proposed model with only 1M parameters has a significantly overall performance, achieving 99.4% accuracy on Cornell dataset and 93.4% accuracy on Jacquard dataset, as well as within 12.5ms inference time.

Drought and water scarcity are significant factors limiting the development of China's maize industry. Deep sowing, as a method to mitigate drought and preserve soil moisture and seedlings, can effectively mitigate the adverse effects of drought stress on their growth. However, deep sowing can influence the emergence of maize seedlings and has a certain impact on their growth and development. To investigate the physiological and transcriptomic changes in maize inbred lines under deep sowing stress, and the alleviation effects of exogenous hormones, this study investigated the response of mesocotyl in deep-seeding tolerant maize inbred line Qi319 and deep-seeding sensitive maize inbred line Zi330 to deep-seeding stress under exogenous MeJA treatment. The physiological and transcriptomic mechanisms underlying the alleviation of deep-seeding stress by exogenous MeJA were elucidated. Results showed that compared to normal sowing depth, mesocotyl length (MES), mesocotyl and coleoptile length (MESCOL) significantly increased under deep-seeding stress for both inbred lines, while seedling length (SDL) was significantly inhibited. However, after adding 1.5 μmol·L^-1 MeJA, MES, MESCOL, and SDL significantly increased compared to deep-seeding stress alone. Exogenous MeJA promoted cell elongation, enhanced mesocotyl length, and improved seedling emergence ability. RNA-Seq sequencing revealed differentially expressed genes (DEGs). Under deep-seeding stress compared to normal sowing depth conditions, 1248 DEGs were identified in Qi319 and 1288 DEGs were identified in Zi330. After adding exogenous MeJA under deep-seeding stress compared to normal sowing depth with exogenous MeJA treatment conditions, 538 DEGs were identified in Qi319 and 2284 DEGs were identified in Zi 330. GO enrichment analysis showed that differentially expressed genes were mainly concentrated in biological processes, cell components and molecular functions. KEGG enrichment analysis showed that differentially expressed genes were mainly concentrated in transport and catabolism, signal transduction, amino acid metabolism and lipid metabolism processes. Compared with the deep-seeded treatment, 12 differentially expressed genes were co-expressed in the two inbred lines under exogenous MeJA treatment, and 10 key genes, including ornithine decarboxylase, terpene synthase 7 and ethylene reaction transcription factor 11, were screened out. Our findings elucidate the molecular mechanism underlying maize's tolerance response to deep seeding and offer valuable insights into candidate gene resources for improving deep seeding tolerance in maize.

As computer networks develop in size and complexity, the need for equipment that can characterize, inspect, monitor, and summarize the features of a transmission in real time grows. Many transmission and packet inspection theories are required to examine network traffic. Unfortunately, loss the track or traceability of one traffic scenarios against others over real-time network. Deep packet inspection (DPI) approaches can be used to alleviate the problem but still face flexibility constraints in the sense that it will be difficult to keep track of prior occurrences. There have been significant theoretical improvements in packet inspection, but the problem of event tracking flexibility remains unsolved. A novel approach for “integrating blockchain with DPI” in summarizing computer network traffic flow events has emerged as a result of this research: This technique captured traffic flows in the network, DPI report, and the entire transmission session header and load them into a smart-contract based- Blockchain. Two experimental scenarios are used to test the validity of the system. The first scenarios involve analysis of DPI transmission without integrating blockchain, follow by the captured of transmission session involving DPI with blockchain. The finding indicates that DPI transmission with blockchain is more secured against "Tampering Incidents", "Unauthorized Access Attempts", “Auditability” and many other security concern. Whereas, the performance overhead introduced by blockchain-based DPI indicate an increase in "DPI Processing Time from 68ms to 150ms, a "CPU Usage increment by 20%, Network Latency increment of 15ms from 20ms to 35ms, and almost all other computational resources increase. Therefore, the finding can be summarized that the performance overhead introduced by integrating blockchain with DPI increases, but it provides a secure DPI reports for decision making.

Deep brain stimulation of the subthalamic nucleus (STN-DBS) is a recognized treatment in Parkinson’s disease (PD), but knowledge is still limited regarding its possible impact on patients with behavioral addiction (BA) who undergo surgery. To assess this effect of STN-DBS, we prospectively studied the follow-up from 3-months pre-surgery to 12-months post-surgery of 12 PD patients with pre-existing BA (9 with pathological gambling disorder, 2 with hypersexual disorder, and 1 with compulsive shopping disorder) in a multicenter study. Patients were assessed for BA, for mental status with anxiety, depression, mania, emotional process and for PD, using the Unified Parkinson’s Disease Rating Scale motor examination (UPDRS3) and cumulative daily L-dopa equivalent daily dose (LEDD). Mean 6 and 12-month post-surgery scores were compared to baseline. After one year of STN-DBS, our results indicated that the treatment remained generally effective and stable. There was no effect on mania state or negative impact on motor signs. A significant improvement of the anxiety score was also observed. The STN is an interesting target for new therapeutic stimulation in BA and works to investigate the precise target in this neurobiological architecture should be performed in the future.

Colorectal cancer is third most common malignancy. For metastasis of rectal cancer, metastasis to skeletal muscle tissue is rare. In this case report, we describe a 51-year-old male patient with rectal cancer with neoadjuvant concurrent radiotherapy and chemotherapy followed by transanal total mesorectal excision with ileostomy. However, he had deep venous thrombosis of left leg after operation and skeletal muscle metastasis was diagnosed via tissue proof. Therefore, less possibility of metastasis increased included brain, duodenum, bone, and nervous system. The prognosis of metastasis to skeletal muscle is poor in contrast to liver or lung metastasis.

Objectives: To assess the concordance of the preoperative application of the #Enzian classification (#ENZIANi) with the postoperative result (#ENZIANs) using surgical findings as the reference standard. Methods: This retrospective study included 282 consecutive patients with deep endometriosis undergoing surgical treatment. Preoperative assessment with transvaginal sonography and magnetic resonance imaging was compared with postoperative assessment. Concordance and diagnostic test evaluation were calculated. Results: The highest concordance was observed in the F (abdominal wall endometriosis) with k Cohen of 0.837, following the values for pelvic locations, with 0.795 for T left, 0.791 for T right, 0.776 for F (adenomyosis), 0.766 for C (rectum), and 0.75 and 0.72 for O right k and O left, respectively. The highest sensitivity was demonstrated for the P compartment *(98%), T compartment (both sides 97%), and A, B, C (94%- 96%), corresponding with deep endometriosis. Conclusions: Preoperative assessment using TVS/TAS+MRI with the ENZIANi score correlates well with the ENZIANs postoperative score and demonstrates good concordance in the detection and localization of deep endometriosis, thereby minimizing false negative results and ensuring accurate preoperative staging. The ENZIAN classification is well-suited to surgeons' needs and benefits from continuous development. Future improvements, such as adding the expanded C module, may be considered in the next edition.

Deep eutectic solvents have emerged as a greener alternative and have attracted so much interest in the last two decades. This paper present alternative synthesis method to classical heating-stirring. The ultrasound method is one of the most promising syntheses DESs in terms of yield and energy. So, ultrasound synthesis method was studied to obtain hydrophobic (Aliquat 336: L-Menthol 3:7; Li-docaine: decanoic acid 1:2) and hydrophilic DESs based on Choline chloride and urea, ethylene glycol and oxalic acid. The physical characterization of DESs by comparison of FTIR spectra no show difference between DESs obtained by heating-stirring and ultrasound synthesis methods. The RMN spectra of the DESs obtained by heating-stirring revealed the DESs formation. Density and viscosity properties of DESs were evaluated. The density values are similar for both synthesis methods. However, lower viscosity values are obtained to the hydrophilic DESs prepared by ul-trasound methods.

A surprising insight from the advent of genomic sequencing was that many genes are deeply conserved during evolution. With a particular focus on genes that interact with light in animals, I explore the metaphor of genetic toolkits, which can be operationalized as lists of genes involved in a trait of interest. A fascinating observation is that genes of a toolkit are often used again and again during convergent evolution, sometimes across vast phylogenetic distances. Such a pattern in the evolution of toolkits requires three different stages: origin, maintenance, and redeployment of the genes. The functional origins of toolkit genes might often be rooted in interactions with external environments. The origins of light interacting genes in particular may be tied to ancient responses to photo-oxidative stress, inspiring questions about the extent to which the evolution of other toolkits were also impacted by stress. Maintenance of genetic toolkits over long evolutionary timescales requires gene multifunctionality to prevent gene loss when a trait of interest is absent. Finally, the deployment of toolkit genes in convergently evolved traits like eyes sometimes involves the repeated use of similar, ancient genes but other times involves different genes specific to each convergent origin. How often a particular gene family is used time and again for the same function may depend on how many possible biological solutions are available. When few solutions exist and are maintained, evolution is constrained to use the same genes over and over. However, when many different solutions are possible, the innovative possibilities of evolution are often on display. Therefore, a focus on genetic toolkits highlights the combination of legacy plus innovation that drives the evolution of biological diversity.

The recently explored synergistic combination of graphene-based materials and deep eutectic solvents (DESs) is opening novel and effective avenues for developing sensing devices with optimized features. In more detail, remarkable potential in terms of simplicity, sustainability, and cost-effectiveness have been demonstrated for sensors, resulting in the creation of hybrid devices with enhanced signal-to-noise ratio, linearity, and selectivity. Therefore, this review aims to provide a comprehensive overview of the currently available scientific literature discussing investigations and applications of sensors that integrate graphene-based materials and deep eutectic solvents, with an outlook for the most promising developments of this approach.

To ensure the security of highly sensitive remote sensing images (RSI) during their transmission, it is essential to implement effective content security protection methods. Generally, secure distribution schemes for remote sensing images often employ cryptographic techniques. However, sending encrypted data exposes communication behavior, which poses significant security risks to the distribution of remote sensing images. Therefore, this paper introduces deep information hiding to achieve secure distribution of remote sensing images, which can serve as an effective alternative in certain specific scenarios. Specifically, the Deep Information Hiding for RSI Distribution (hereinafter referred to as DIH4RSID) based on encoder-decoder network architecture with Parallel Attention Mechanisms (PAM) by adversarial training was proposed. Our model is constructed with four main components: a preprocessing network (PN), an embedding network (EN), a revealing network (RN) and a discriminating network (DN). The PN module is primarily based on Inception to capture more details of RSI and targets of different scales. The PAM module obtains features in two spatial directions to realize feature enhancement and context information integration. The experimental results indicate that our proposed algorithm achieves relatively higher visual quality and secure level compared to related methods. Additionally, after extracting the concealed content from hidden images, the average classification accuracy is unaffected.

Articular cartilage lacks intrinsic regenerative capabilities, and the current treatments fail to regenerate damaged tissue and lead only to temporary pain relief. These limitations have prompted the development of tissue engineering approaches, including 3D culture systems. Thanks to their regenerative properties and capacity to recapitulate embryonic processes, spheroids obtained from mesenchymal stromal cells are increasingly studied as building blocks to obtain functional tissues. The aim of this study was to investigate the capacity of adipose stromal cells to assemble in spheroids and differentiate toward chondrogenic lineage from the perspective of cartilage repair. Spheroids were generated by two different methods (3D chips vs Ultra-Low Attachment plates), differentiated toward chondrogenic lineage, and their properties were investigated by: molecular biology analyses, biophysical measurement of mass density, weight, and size of spheroids, and confocal imaging. Overall, spheroids showed the ability to differentiate by expressing specific cartilaginous markers that correlate with their mass density, defining a critical point at which they start to mature. Considering the spheroid generation method, this pilot study suggested that spheroids obtained with chips are a promising tool for the generation of cartilage organoids that could be used for preclinical/clinical approaches, including the realization of personalized therapy.