Damage to crops from wildlife interference is a common threat to food security among rural communities in or near Game Management Areas (GMAs) in Zambia. This study uses a two-stage econometric model and cross-sectional data from a survey of 2,769 households to determine the impact of land use planning on the probability and extent of wildlife-inflicted crop damage. The results show that crop damage is higher in GMAs as compared to non-GMAs, and that land use planning could be an effective tool to significantly reduce the likelihood of such damage. These findings suggest that there is merit in the current drive to develop and implement land use plans as means to minimize human-wildlife conflict such as crop damage. This is especially critical as Zambian conservation policies do not have an explicit provision for compensation in the event of damage from wildlife.

The management of the electrical energy still raises a huge interest for end-users at the household level. Home electricity management systems (HEMS) have recently emerged both to warrant uninterruptible power and high power quality, and to decrease the cost of electricity consumption, by either shifting it in off peak time or smoothing it. Such a HEMS requires a bidirectional DC-AC converter, specifically when an energy transfer is required between a storage system and the AC-grid, and vice versa. This article points out the relevance of an innovative topology based on sinusoidal waveforms from the generation of sine half-waves. Such a topology is based on a DC-DC stage equivalent to an adjustable output voltage source and a DC-AC stage (H-bridge) which are in series. The results of a complete experimental procedure prove the feasibility to improve the power quality of the output signals in terms of total harmonic distortion (THD-values about 5%). The complexity of the proposed converter is minimized in comparison with multilevel topologies. Finally, wide band-gap semiconductor devices (SiC MOSFETs) are helpful both to warrant the compactness and the high efficiency (about 96%) of the bidirectional converter, whatever its operation mode (inverter or rectifier mode).

This study was undertaken to forecast waste generation rates of accommodation sector of North Cyprus as a case. Three predictor models including multiple linear regression (MLR), artificial neural networks (ANNs) and central composite design (CCD) were applied to predict the waste generation rate during the lean and peak seasons. ANN showed highest prediction performance, specifically, lowest values of the standard error of prediction (SEP = 2.153), mean absolute error (MAE=1.378) and highest R2 value (0.998) confirmed the accuracy of the model. The analysed wastes were categorised into recyclable, general waste and food residues. The authors estimated the total waste generated during the lean season as 2010.5 kg/day, in which large-sized hotel accounted for largest fraction (66.7%), followed by the medium hotels (19.4%) and guesthouse accounted for smallest part (2.6%). During the peak season, about 49.6% increases in the waste generation rates were obtained. Interestingly, 45% of the wastes were generated by the British tourists while the least waste was generated by African tourists (7.5%). The ANN predicted that the small and large hotels would produce 5.45 and 22.24 tons of waste by the year 2020, respectively. The findings herein are promising and useful in establishing a sustainable waste management system.

This paper proposes an Integrated Fire Management (IFM) framework that can be used to support communities and resource managers in finding effective and efficient approaches to prevent damaging fires, as well as maintain desirable fire regimes in Kenya. Designing and implementing an IFM approach in Kenya calls for a systematic understanding of the various uses of fire and the underlying perceptions and traditional ecological knowledge of the local people. The here proposed IFM framework allows an evaluation of the risks posed by fires, while balancing them with their beneficial ecological and economic effects, and thus developing effective fire management approaches. A case study of the proposed IFM framework was conducted in Gathiuru Forest that is part of the larger Mt. Kenya Forest Ecosystem. Focus group discussions were held with key resource persons, primary and secondary data on socio-economic activities were studied, fire and weather records were analyzed and the current fire management plans were consulted. Questionnaires were used to assess how the IFM is implemented in the Gathiuru Forest Station. The results show that the proposed IFM framework is scalable and can be applied in places with fire-dependent ecosystems as well as in places with fire-sensitive ecosystems in Kenya. The effectiveness is dependent on the active participation, formulation and implementation of the IFM activities by the main stakeholder groups (Kenya Forest Service (KFS), Kenya Wildlife Service (KWS), and the Community Forest Associations (CFA)). The proposed IFM framework helps in implementing cost-effective approaches to prevent damaging fires and maintain desirable fire regimes in Kenya.

The role of human resource management practices and organizational loyalty dealing with employee retention has been widely explored and examined in the existing literature. The majority of human resource management researchers have focused on the role of policies and practices in different sectors related to employee retention. However, less attention has been given to identifying the practices and procedures common across all industries and sectors. The present study attempts to determine and examine the most important constructs like HR practices and organizational loyalty of employee retention management and proposes a comprehensive structural equation model to measure the impact of these constructs on employee retention. After an extensive review of the literature, organizational loyalty, and human resources management practices like recruitment and selection, compensation and benefit, training and development, supervision and evaluation have been identified as four essential practices dealing with employee retention and are common across all industries. These practices constitute the component factors of an employee retention management predicting employee’s turnover intentions. The survey method was adopted, and the original data obtained through the self-administered questionnaire. The valid one hundred and eighty-nine (189) respondents analyzed by using Lisrel 8.7, Structural equation model (SEM) analysis results shows that human resource management practices and organizational loyalty have strong positive impact on employee retention. This study tends to assist human resource managers and decision makers in selecting the appropriate motivating factors to retain and satisfy their employees

In networked driving simulation, two or more human drivers participate interactively within a shared virtual environment. Thereby, typical applications of driving simulation can be extended to consider multi-driver scenarios, where a much closer approximation of reality with its unpredictability is achieved. However, the utilized network is typically prone to a considerable amount of message traffic. In addition to restricted system scalability, the resulting degradation of network performance leads to invalid simulation outcomes or unacceptable system behavior. High-level architecture (HLA) is an IEEE standard for networked simulation. Data distribution management (DDM) is one of the service groups provided by HLA standard. The aim of the DDM service is to reduce network traffic and to save effort required to process unnecessary received data. However, different approaches for current DDM implementations show major drawbacks in terms of utilization complexity, inefficiency, and yet added network overhead. This paper presents a concept of an interest manager that takes over the DDM functionality and avoids these drawbacks. Simulation data is exchanged between the participating driving simulators only when it is necessary according to the driving situations. The concept is validated by analyzing the network load of two driving maneuvers with and without the interest manager.

Food systems will need to undergo considerable transformation. To be better prepared for and resilient to uncertainty and disturbances in the future, resource users and managers need to further develop knowledge about the food and farming system, with its dominating feedback structures and complexities, and to test robust and integrated system-based solutions. This paper investigates how participatory system dynamics modeling can be adapted to groups at the community level with low or no formal educational background. The paper also analyzes the refinement of workshop participants’ mental models as a consequence of a participatory system dynamics intervention. For this purpose, we ran two workshops with small-scale farmers in Zambia. Analysis of workshop data and post-workshop interviews shows that participatory system dynamics is well adaptable to support an audience-specific learning-by-doing approach. The use of pictures, objects and water glasses in combination with the basic aspects of causal loop diagramming makes for a well-balanced toolbox. Participants acquire understanding that is also relevant beyond systems thinking in that is offers a range of practical insights such as a critical evaluation of common food security strategies.

This study aims to explain individual engagement in sustainable waste management behaviors (SWMBs) based on the application of protection motivation theory (PMT). SWMBs include waste avoidance, green purchasing behavior, reuse and recycle, and waste disposal behaviors. This study applies PMT to explore how individuals’ SWMBs are influenced by their perceived threats caused by environmental contamination from waste disposal and their perceived coping capability. The Bangkok metropolitan area was selected as a case study because it has faced serious waste management problems caused by massively increasing amounts of solid waste during the last ten years. Questionnaire surveys were conducted with 193 public and private officers residing in the city of Bangkok. The one-way analysis of variance (ANOVA) was performed to justify the effect of individual threat appraisal and coping appraisal on the engagement in SWMBs. The results demonstrated that respondents’ self-efficacy highly influenced all types of SWMBs. The perceived probability of being impacted from pollutants influenced all of the SWMBs except green purchasing behaviors. Response efficacy did not influence all SWMBs; however, the perceived severity of adverse consequences caused by pollutants highly influenced reuse and recycle behaviors. It could be suggested that PMT is well suited for investigating low-cost and simple SWMBs. It could also be suggested that different communication campaigns should be established to enhance citizens’ engagement in each type of SWMB.

Background: For the past two decades, the Copenhagen Psychosocial Questionnaire (COPSOQ) has been established as a valid instrument to measure psychosocial stress at work. Nowadays, the COPSOQ international network is responsible for the monitoring and improvement of COPSOQ. 2019, a new questionnaire was published, and the Greek version is now being validated. Methods: Measurement qualities of the Greek COPSOQ III have been explored in adherence to the usual requirements of a validation study as defined by DIN EN ISO 10075-3. A sample of observations from 2.189 participants surveyed with the COPSOQ in Greece was used to validate the current version with appropriate statistical analyses. Exploratory factor analysis was used to assess statistical relations for many scales. Results: With its 108 items and 40 scales, the Greek COPSOQ III includes all psychosocial work factors that have been internationally validated and remain compatible with about 72% of the COPSOQ III German version content. Beyond primary results, congruence with widely used theoretical approaches like the Demand-Control(−Support) model (DCM) or the Job Demands-Resources model (JDR) is generally satisfactory. In summary, our validation study for the Greek COPSOQ III version showed adequate reliability and validity, which is in line with the COPSOQ III questionnaire from other European countries, and it is also compatible with the validation of the German COPSOQ III (Lincke, 2021). Our regression analysis showed that the 34 psychosocial work factors (34 “context” scales) could adequately predict the scores of the satisfactory and health scales (6 “outcome” scales). The analysis also indicated the top five (5) predictors (context variables) for each of the six (6) “effect” scales (outcome variables). Conclusions: With the launch of COPSOQ III in Greece, current and new workplace psychosocial aspects could be explored. COPSOQ III(GR) is a beneficial instrument for enterprise research and risk assessment.

This study purposes the use of plug-in electric vehicles for demand side management (DSM) considering uncertainties in demand as well as uncertainties due to mobility of PEV to mitigate peak demand. The solution also seeks to reduce electric cost in addition to reducing the effects of greenhouse gases. In recent years DSM using distributed storage system such as battery energy management system (BESS) and plugged-in electric vehicles (PEV) have become very prevalent with most implementations resorting to deterministic load forecast. These methods do not consider the potential growth in demand making their solutions less robust. In this study we propose a real-time density demand forecast and stochastic optimization for robust operation of PEV for a building. This method accounts for demand uncertainties in addition to uncertainties in mobile energy storage as found in PEV, making the resulting solution robust as compared to the deterministic case. A case study on a real site in South Korea is used for verification and testing. The proposed study is verified and tested against existing algorithms. The result verifies the effectiveness of the proposed approach

This study explores the influence of social media marketing on brand loyalty, employing a qualitative research approach to gain in-depth insights into the key factors that drive consumer engagement and commitment. Through semi-structured interviews with 20 active social media users and a comprehensive analysis of social media content, the research identifies several critical elements affecting brand loyalty. Personalization emerged as a central theme, with tailored content, customized offers, and personalized recommendations significantly enhancing users' emotional connection with brands. High-quality content, characterized by engaging visuals and valuable information, was found to reinforce positive brand perceptions and sustain loyalty. Influencer marketing also plays a pivotal role, with authentic endorsements from relevant influencers boosting brand credibility and trust. Effective community management, involving active engagement, responsive feedback, and relationship-building, contributes to a positive brand experience and strengthens user loyalty. Targeted and relevant social media advertising supports brand loyalty, although excessive or irrelevant ads can lead to disengagement. The study also highlights the importance of balancing interaction frequency and content quality to maintain user interest without causing fatigue. Addressing social media fatigue by delivering relevant and valuable content is crucial for preventing user disengagement. Content that resonates with users' values and emotions further strengthens brand attachment. Consistency in brand voice, visual identity, and values ensures a coherent and positive brand experience. The findings emphasize the need for a strategic approach to social media marketing, integrating personalization, content quality, influencer partnerships, community management, advertising relevance, and consistency to build and sustain strong brand loyalty.

Electric vehicles (EVs) are pivotal in addressing the escalating environmental crisis. While EV drivetrains excel compared to those of vehicles with internal combustion engines (ICE), their energy storage systems are hampered by limited range, lifespan, and lengthy charging times. Hybrid energy storage systems (HESS) present a viable current solution to these issues. This review thoroughly explores state-of-the-art in the emerging field of multisource EVs that utilize HESS, incorporating any combination of batteries (BTs), supercapacitors (SCs), flywheels (FWs), fuel cells (FCs), and/or transmotors. In addition, the paper systematically categorizes and evaluates different hybrid configurations, detailing potential topologies and their respective advantages and limitations. Moreover, the paper examines diverse control algorithms used to manage these complex systems, focusing on their effectiveness and operational efficiency. By identifying current research gaps and technological challenges, this study aims to delineate future research directions that could enhance the deployment and optimization of multisource EVs, thereby addressing critical challenges such as energy density, system reliability, and cost-effectiveness.

This study examines the integration of Environmental, Social, and Governance (ESG) factors into global banking practices and their impact on financial stability, measured by the Bank to Capital Asset Ratio. Through a comprehensive literature review and data analysis, the paper highlights the dual role of banks as catalysts for ESG investment and risk managers. It discusses the challenges and opportunities in transitioning to ESG-aligned business models, emphasizing the importance of regulatory frameworks and risk management approaches. The findings suggest that ESG integration enhances bank stability and competitiveness, contributing to sustainable economic development. The paper concludes with policy implications and recommendations for further integration of ESG factors into banking governance.

This study constructs a comprehensive line loss management evaluation knowledge graph, considering the impact of various factors such as power grid structure characteristics, equipment's physical parameters, power grid operation characteristics, electricity consumption features, and natural conditions. It establishes the association between line loss characteristics and line loss retrieval and configures the data source for line loss management evaluation indicators. Based on Principal Component Analysis (PCA), this study selects comprehensive evaluation indicators for line loss management, verifies the rationality of the indicators, and proposes an integrated evaluation method for municipal power grid line loss management. A full-process composite evaluation method based on DEMATEL-Entropy Weight-TOPSIS is constructed, and the accuracy of the evaluation method is verified through ablation experiments. The TOPSIS analysis method is applied to empirical research on cross-sectional data from a city in Guangxi from 2012 to 2022 to validate the evaluation system's effectiveness, scientific nature, and objectivity. The case analysis shows that the line loss evaluation index system established in this paper effectively reduces the redundancy of line loss data and can objectively and rationally reflect the actual status of line loss management work, serving as a basis for decision-making in future line loss management evaluations.

In this study, a decentralized incineration facility was evaluated over a three-year period, focusing on performance aspects such as burning rate, ash production, fuel and electricity consumption, and ash composition while processing animal by-products (ABP). The total cost for ABP incineration was determined to be 159 € per ton of ABP, with the major components being capital depreciation (42%), maintenance expenditures (26%), labor (18%), and transportation costs (9%). Liquified petroleum gas (LPG) consumption ranged from 3-7 kg per ton of ABP, while electricity use was between 15-20 kWh per ton of ABP incinerated. The incineration process generated 7-10% (by weight) ABP ash, which was characterized by high calcium and phosphorus content and low levels of hazardous trace elements. Leaching tests demonstrated the potential for recovering the alkaline supernatant for flue gas treatment and the phosphorus-rich slurry for fertilizer production. The findings suggest that energy recovery and valorization are crucial for minimizing operational costs and environmental impact, emphasizing the benefits of integrating advanced resource recovery techniques in ABP incineration facilities.

Age diversity in the workplace is a growing challenge. This study aimed to assess work ability among Family and Community Nurses (FCNs) in a large Local Health Authority (LHA) in Tuscany, Italy. The Work Ability Index (WAI) was administered to 178 FCNs, along with demographic and occupational data. Results showed a significant negative correlation between chronological age and WAI, indicating decreasing work ability with age. Moreover, work setting, educational attainment, and health conditions influenced work ability. Nurses working in home settings and those with higher educational levels reported better work ability. A high prevalence of health conditions, particularly musculoskeletal disorders, was observed. These findings highlight the need for targeted interventions to support FCNs' work ability and address age-related challenges. This study provides a foundation for developing strategies to optimize the nursing workforce and ensure high-quality care delivery.

This qualitative study explores the role of Supplier Relationship Management (SRM) in optimizing inventory within the context of e-commerce. Through semi-structured interviews with e-commerce managers and supply chain experts, the study investigates the strategies, challenges, and outcomes associated with SRM practices. Key findings highlight the critical importance of strategic partnerships with suppliers, emphasizing trust, transparency, and goal alignment as foundational elements for effective SRM. Participants underscored the transformative impact of technological advancements, including advanced analytics and blockchain technology, in enhancing supply chain visibility, optimizing inventory levels, and improving operational agility. However, the study also identifies challenges in SRM implementation, such as cultural differences, regulatory compliance, and geographical distances, which require proactive management strategies. Innovation emerges as a key driver of competitive advantage in e-commerce, facilitated through collaborative R&D initiatives and co-innovation with suppliers. Strategic alignment with organizational goals is crucial for integrating SRM practices with broader business objectives, including operational efficiency and risk mitigation. Recommendations include adopting integrated SRM strategies that leverage technological innovations while maintaining a focus on relationship-building and sustainability. Enhanced supplier performance monitoring, proactive risk management, and the integration of sustainable practices are proposed to strengthen supplier relationships and enhance supply chain resilience. By addressing these insights, e-commerce firms can optimize inventory management, drive innovation, and achieve sustainable growth in the digital economy.

Building Information Modeling (BIM) is undeniably the most important trend in the digitization of the construction sector in recent years. BIM models currently being built are extremely geometrically rich, that is, they are modeled at a high level of detail in terms of geometry. Thanks to object-oriented programming paradigms, BIM models include high-level relationships to ensure interactions between objects, rapid view generation and documentation. However, these models are not always equally rich in non-graphical data. This is true for parameters at the library object level, with which building object models are saturated, but also at the project, site, building or floor level according to the structure of the interoperable Industry Foundation Classes (IFC) format. For this reason, experimental work was undertaken on semantic enrichment in non-graphical data of a public building (Public Kindergarten, Secemin, Poland), which has its BIM model at a high level of geometric detail but is poor in non-graphical data. As a result of the research and development work, all levels of the IFC structure were saturated with non-graphical data, validated, and the possibilities of their use were shown from the perspective of the facility manager. The article contributes to the discussion on semantic enrichment from CAD3D to BIM by presenting a detailed process for entering non-graphical data into a BIM model.

The rapid evolution of financial technology (fintech) has significantly transformed the financial services landscape, creating opportunities for innovation and introducing new risks. Traditional financial institutions and fintech companies operate under different paradigms, resulting in disparate risk management practices. This paper proposes a comprehensive framework for integrating operations and risk management practices between traditional financial institutions and fintech companies. By leveraging advanced technologies such as artificial intelligence (AI) and machine learning (ML), the framework aims to ensure consistent and effective risk assessment across the financial sector. The financial services industry is characterized by rapid innovation, primarily driven by fintech companies offering various services that enhance efficiency, accessibility, and customer satisfaction. However, the growth of fintech brings substantial risks, including cyber threats, data privacy concerns, regulatory compliance challenges, and operational vulnerabilities. Traditional financial institutions prioritize stability, security, and compliance within established risk management frameworks. The divergence in operational models and risk management approaches creates a fragmented risk landscape, posing significant challenges to the financial system's stability and security. This paper identifies the critical need for a unified framework integrating the risk management practices of traditional financial institutions and fintech companies. The proposed framework leverages AI and ML to enhance the accuracy and comprehensiveness of risk assessments, utilizing a centralized data repository for real-time risk assessment. Unified risk management policies covering cybersecurity, operational risk, regulatory compliance, financial crime, and real-time monitoring and reporting tools ensure robust risk management protocols and prompt response to potential risks. Aligning with regulatory requirements and incorporating best practices from both sectors, the integrated risk management approach enhances the financial ecosystem's stability, security, and public confidence.

This qualitative study explores Supplier Relationship Management (SRM) in the context of digital transformation within e-commerce businesses, focusing on the implications of emerging digital technologies. Through semi-structured interviews and documentary analysis, the study examines how organizations leverage technologies like artificial intelligence (AI), blockchain, and Internet of Things (IoT) to enhance SRM practices. Findings reveal that digitalization enables improved operational efficiencies, real-time data analytics, and expanded supplier networks through platforms such as Amazon Business and Alibaba. Strategic shifts are noted towards collaborative supplier relationships, emphasizing joint innovation, technology co-investment, and shared risk management strategies. However, the implementation of digital SRM strategies presents challenges, including data privacy concerns, integration complexities, cybersecurity threats, and regulatory compliance issues. Organizations must navigate these challenges by developing robust governance frameworks and cybersecurity protocols to protect sensitive information and ensure regulatory adherence. Key performance indicators (KPIs) such as supplier performance, cost savings, innovation impact, risk management effectiveness, and sustainability integration are critical for evaluating the success of digital SRM initiatives. Strategically, businesses are advised to prioritize leadership commitment, cross-functional collaboration, and continuous learning to optimize digital SRM practices effectively. Future research should explore emerging trends in digital SRM, investigate technological impacts on supplier dynamics and organizational performance, and examine ethical considerations in digitalization. By integrating these insights into strategic decision-making, businesses can enhance supplier relationships, mitigate operational risks, and achieve sustainable growth in the global marketplace.

This qualitative research investigates the influence of Corporate Social Responsibility (CSR) on Supplier Relationship Management (SRM) within the e-commerce sector. Through semi-structured interviews and secondary data analysis, the study explores motivations, challenges, impacts, and strategic outcomes of integrating CSR practices into supplier relationships. Motivations for adopting CSR include ethical considerations, regulatory compliance, and meeting stakeholder expectations, reflecting a strategic alignment with corporate values and societal demands. Challenges such as resource constraints, regulatory complexities, and cultural differences highlight operational hurdles and strategic considerations e-commerce firms face in implementing CSR initiatives effectively. The study reveals that CSR enhances trust, collaboration, and risk mitigation within e-commerce supply chains through transparent communication, shared values, and ethical practices. Strategically, CSR contributes to enhanced brand equity, competitive advantage, and long-term value creation by differentiating firms in competitive markets and attracting socially conscious consumers and investors. However, economic trade-offs, stakeholder divergence, and operational complexities require firms to adopt adaptive strategies that balance short-term financial goals with long-term sustainability objectives. The findings suggest avenues for future research exploring longitudinal impacts of CSR on supplier relationships, cross-sectoral comparisons, and technological advancements in CSR-driven SRM practices. Practically, e-commerce firms should prioritize strategic alignment of CSR initiatives with core business objectives, engage stakeholders in CSR strategy development, and embrace continuous improvement to foster ethical conduct, stakeholder trust, and sustainable business practices.

This qualitative research investigates sustainable procurement practices, focusing on the integration of environmental and social criteria in supplier evaluation processes. The study explores how organizations, ranging from large multinational corporations to smaller enterprises, navigate sustainability challenges and opportunities within their procurement strategies. Data were gathered through semi-structured interviews with procurement professionals and sustainability managers across diverse industries. Themes identified include varying organizational commitments to sustainability, from structured policies and resource allocation in larger firms to reactive approaches constrained by resource limitations in smaller entities. Effective supplier relationship management emerged as crucial, facilitating collaborative partnerships aimed at improving environmental and social performance across supply chains. Motivations for sustainable procurement practices encompass regulatory compliance and responding to consumer demands for eco-friendly products, shaping procurement decisions to enhance market competitiveness and stakeholder satisfaction. Environmental and social criteria integration in supplier evaluations highlighted strategies such as lifecycle assessments and sustainable sourcing practices, aimed at minimizing environmental footprints and promoting ethical labor practices. Benefits included cost savings and enhanced brand reputation, tempered by challenges such as higher procurement costs and supplier resistance. Leadership commitment and organizational culture were identified as critical enablers of sustainable procurement, influencing strategic alignment and fostering a culture of sustainability within organizations. The study underscores the transformative potential of sustainable procurement in achieving organizational resilience and contributing to global sustainability goals.

We estimate general public’s willingness to pay (WTP) for agricultural soil quality protection and improvement in Spain (n=1000) and the UK (n=984) using data from a cross-sectional survey via Qualtrics panels in March-April 2021. We use a double bound dichotomous choice contingent valuation approach to elicit the individuals’ WTP. We investigate the effect of uncertainty on the success of policies aiming at achieving soil protection. In addition, to understand the heterogeneity in individuals’ WTP for agricultural soil quality protection and improvement we model individuals’ WTP through individual’s awareness and attitudes toward agricultural soil quality protection and the environment, trust in institutions; risk and time preferences; pro-social behavior and socio-demographics in Spain and the UK. We found that there is significant public support for agricultural soil quality protection and improvement in Spain and the UK. We also found that the support does not vary significantly under uncertainty of success of policies aiming at achieving soil protection. However the individual’s reasons for supporting agricultural soil quality protection and improvement are found to depend on the level of uncertainty and country. Hence, promoting public support for soil protection needs to be tailored according to the level of general public’s perceived uncertainty and geographic location.

Strategic procurement practices within global supply chains are crucial for organizations aiming to navigate complex challenges and achieve sustainable competitive advantage. This qualitative research explores how procurement has evolved from a cost-centric function to a strategic enabler of broader organizational objectives, including risk management, sustainability, and innovation. Through semi-structured interviews with procurement managers and supply chain executives across diverse industries, the study investigates key themes such as supplier relationship management, technological integration, and the impact of sustainability considerations on procurement decision-making. Findings indicate that effective procurement strategies, such as strategic sourcing and collaborative supplier partnerships, are pivotal in enhancing supply chain resilience and operational efficiency. Technological advancements, particularly artificial intelligence and big data analytics, are transforming procurement operations by optimizing processes and enhancing decision-making capabilities. However, the study identifies significant challenges, including regulatory complexities, geopolitical uncertainties, and internal resistance to change, which require adaptive approaches to procurement management. Sustainability emerges as a critical driver, with organizations adopting ethical sourcing practices, reducing carbon footprints, and promoting supplier diversity to meet environmental and social responsibility goals. Leadership qualities such as visionary thinking and emotional intelligence are essential for navigating these challenges and driving innovation within procurement practices. Overall, this research contributes to a deeper understanding of strategic procurement's role in organizational strategy and offers practical insights for enhancing procurement effectiveness and resilience in a competitive global market landscape.

This qualitative study explores how businesses are adapting their Supplier Relationship Management (SRM) strategies to address the challenges and capitalize on the opportunities presented by evolving e-commerce trends. Through in-depth interviews with key industry stakeholders, the research investigates the integration of advanced technologies such as artificial intelligence (AI), blockchain, and the Internet of Things (IoT) into SRM practices. Findings reveal that these technologies enhance efficiency, transparency, and responsiveness within supply chains, enabling businesses to navigate complexities such as supply chain dynamics, fluctuating consumer demand, and regulatory compliance. The study identifies effective strategies employed by businesses, including enhancing communication channels with suppliers, diversifying supplier bases, and investing in technological advancements. These strategies enable businesses to mitigate risks, improve collaboration, and drive innovation, thereby maintaining competitive advantage in the digital marketplace. Collaborative practices such as joint product development, shared risk management, and co-investment in technology emerge as critical drivers of successful SRM. Ultimately, this research contributes to a deeper understanding of SRM in the context of e-commerce, offering insights into how businesses can optimize their supply chain operations amidst technological disruptions and market fluctuations. The findings underscore the importance of proactive adaptation and strategic alignment with suppliers to foster resilient and agile supply chains. As e-commerce continues to evolve, businesses must leverage these insights to refine their SRM strategies and sustain growth in an increasingly competitive environment.

The paper explores using generative artificial intelligence (AI) in financial market data management and forecasting. By integrating multiple data sources and feature extraction techniques, such as fundamental analysis, technical indicators, global economic data, and sentiment analysis, generative AI constructs a comprehensive deep learning framework that significantly enhances financial data management efficiency and market forecasts' accuracy. Specifically, technologies like generative adversarial networks (Gans) and variational autoencoders (VAE) demonstrate substantial data augmentation and model optimisation potential. The application value of the model in real-time market prediction and trading strategy optimization is further amplified through reinforcement learning methods.

This qualitative research investigates how supply chain innovations drive marketing differentiation in consumer goods companies. In a competitive global marketplace, firms are increasingly leveraging advanced supply chain management (SCM) practices to enhance operational efficiency and create distinctive market positions. The study explores five key supply chain innovations—digitalization, sustainability practices, predictive analytics, agile supply chain models, and collaborative partnerships—and their impact on marketing differentiation strategies. Data were collected through semi-structured interviews with 20 executives and managers from leading consumer goods companies, analyzing themes related to innovation adoption, challenges, and outcomes. Findings indicate that digital technologies such as IoT, AI, and blockchain are pivotal in improving supply chain visibility, optimizing inventory management, and enabling real-time decision-making, thereby supporting personalized customer experiences and agile responses to market dynamics. Sustainability practices, including sustainable sourcing and green logistics, emerge as critical drivers of brand reputation and consumer trust, aligning with growing consumer preferences for eco-friendly products. Predictive analytics facilitate better demand forecasting and pricing strategies, while agile supply chain models enhance flexibility and responsiveness in delivering products faster to market. Despite benefits, challenges include integrating innovations with legacy systems, managing resistance to change, and addressing data security concerns. Strategies for overcoming these barriers include leadership commitment, cross-functional collaboration, talent development, and strategic partnerships. By embracing these strategies and innovations, consumer goods companies can strengthen their competitive positioning, enhance customer satisfaction, and achieve sustainable growth in a rapidly evolving marketplace.

This qualitative research explores the intricate relationship between cultural influences on supply chain practices and their implications for marketing strategies. Cultural dimensions such as individualism versus collectivism, uncertainty avoidance, and contextuality significantly shape decision-making processes, risk management strategies, and relationship dynamics within global supply chains. Through semi-structured interviews with supply chain managers, marketing executives, and cultural experts across diverse industries and regions, this study investigates how cultural values impact supply chain operations and consumer engagement strategies. Key findings highlight that collectivist cultures prioritize consensus-building and long-term relationships, fostering trust and collaboration among supply chain partners. In contrast, individualist cultures emphasize efficiency and accountability but may face challenges in relationship building. Risk management practices vary with cultural orientations towards uncertainty, influencing the adoption of structured versus flexible approaches to mitigate disruptions. In terms of marketing implications, the study underscores the importance of cultural sensitivity in crafting effective strategies. High-context cultures require marketing messages that resonate emotionally through implicit communication and cultural symbolism, while low-context cultures prefer clear, direct messaging focusing on product benefits. The study concludes by advocating for cultural competence as a strategic imperative for global businesses, enabling them to leverage cultural diversity for innovation and competitive advantage. It emphasizes the need for continuous adaptation to cultural nuances and market dynamics to foster inclusive collaboration and achieve sustainable growth in a globalized economy.

This qualitative research explores the intricate relationship between cultural influences on supply chain practices and their implications for marketing strategies. Cultural dimensions such as individualism versus collectivism, uncertainty avoidance, and contextuality significantly shape decision-making processes, risk management strategies, and relationship dynamics within global supply chains. Through semi-structured interviews with supply chain managers, marketing executives, and cultural experts across diverse industries and regions, this study investigates how cultural values impact supply chain operations and consumer engagement strategies. Key findings highlight that collectivist cultures prioritize consensus-building and long-term relationships, fostering trust and collaboration among supply chain partners. In contrast, individualist cultures emphasize efficiency and accountability but may face challenges in relationship building. Risk management practices vary with cultural orientations towards uncertainty, influencing the adoption of structured versus flexible approaches to mitigate disruptions. In terms of marketing implications, the study underscores the importance of cultural sensitivity in crafting effective strategies. High-context cultures require marketing messages that resonate emotionally through implicit communication and cultural symbolism, while low-context cultures prefer clear, direct messaging focusing on product benefits. The study concludes by advocating for cultural competence as a strategic imperative for global businesses, enabling them to leverage cultural diversity for innovation and competitive advantage. It emphasizes the need for continuous adaptation to cultural nuances and market dynamics to foster inclusive collaboration and achieve sustainable growth in a globalized economy.

Nuʻupia Ponds, a traditional Hawaiian fishpond system, are located at Marine Corps Base Hawaii (MCBH) and part of the Nuʻupia Ponds Wildlife Management Area, a wetland refuge for native, endangered, and protected birds and Hawaiian green sea turtles, as well as many native fish species. Currently, there is uncertainty regarding the ecological status and condition of the fishponds following prior modification of wetland habitats in and around the ponds. This study examines circulation dynamics and characterizes water exchange, pond volume, and residence time across the full tidal spectrum at Nuʻupia fishponds. Our results indicate a general west to east gradient in current flow; with higher flushing rates and lower residence times of fishponds in the western ponds of the Nu’upia system compared to the eastern ponds. We further found low flushing rates at several sites causing limited water exchange with Kāne’ohe Bay, as well as within Nu’upia Pond system. Sufficient water circulation plays a fundamental role in maintaining a healthy balance of fishpond flora and fauna and preserve ecosystem health. The results from this study provide a baseline of current physical water circulation dynamics and implications for ecosystem health, as well as inform science-based conservation and management strategies moving forward.

The growing requirements regarding the safety of using polymers and their composites are related to the emergence of more effective, sustainable, and hazardous-limited fire retardants (FR). Significant amounts of FR are usually required to effectively affect the polymer burning behavior, while the knowledge of their recycling potential is still insufficient. At the same time, concerns are related not only to the reduced effectiveness of flame retardancy but, above all, to the potential deterioration of mechanical properties caused by the degradation of temperature-affected additives under processing conditions. This study describes the impact of four-time reprocessing of bio-based polyamide 11 (PA11) modified with an intumescent flame retardant (IFR) system composed of ammonium polyphosphate (APP), melamine cyanurate (MC) and pentaerythritol (PER) and its composites containing additionally short basalt fibers (BF). Composites manufactured by twin-screw extrusion were subjected to four reprocessing cycles by injection molding, comprehensively analyzing structural, mechanical, and fire behavior changes in each cycle. The obtained results confirmed the safety of using the proposed flame-retardant system for polyamide, processed under the recommended process parameters, without the risk of significant changes in the structure despite the partial increase in flammability caused mainly by the degradation of the polymer.

Postpartum haemorrhage remains a significant contributor to maternal mortality and morbidity worldwide, particularly in low- and middle-income countries. PPH continues to pose challenges in both developed and developing nations despite being preventable. This review examines the current state of knowledge regarding PPH within the context of Vietnam, a country with its unique healthcare landscape. This review identifies critical areas for improvement and future research directions based on a comprehensive literature analysis, including epidemiological insights, risk factors, prevention strategies, and management approaches. Discrepancies in PPH definitions and prevalence rates across regions highlight the need for tailored interventions and policies. Understanding the specific challenges and opportunities related to PPH in Vietnam is crucial for informing evidence-based interventions and policies to improve maternal health outcomes. This review contributes to the broader global effort to reduce maternal mortality by addressing gaps in knowledge and proposing strategies to enhance PPH prevention and management in Vietnam.

The period of the COVID-19 pandemic resulted in a rapid development of innovative education methods, in particular using e-learning and remote work tools. The effects of this development are also post-pandemic changes in formal teaching regulations, in particular in higher education, allowing classes and lectures to be carried out with Blended Learning or Flipped Classroom methods. This paper provides information about a case study of implementing ICT technologies with elements of the mentioned methods in one of the subjects at a technical university. The implemented tools and solutions in the field of e-learning and interactivity are presented, along with information regarding their perception by students during two academic years in the post-COVID-19 period. The analysis of results of these information and student evaluations indicates their generally positive approach to such innovations in the educational path, and at the same time shows significant challenges for teachers to increase the attractiveness and effectiveness of the teaching process and the development of practical, technical skills of students.

To curb the impacts arising from the agricultural sector the actions undertaken by policymakers, and ultimately by the farmers, are of paramount importance. However, finding the best strategy to reduce impacts, and especially assessing the effects of the interactions and mutual influence among farmers, is very difficult. To this aim, this paper shows an application of an agent-based model (ABM) coupled with life cycle assessment (LCA), which also includes multi objective optimization of farming activities (including both crop cultivation and livestock breeding) from an economic and environmental perspective. The environmental impacts are assessed using the impact assessment scores calculated with the Environmental Footprint (EF) 3.0 life cycle impact assessment (LCIA) method and the study is conducted “from cradle to farm gate”. The model is applied to all the farms in Luxembourg, whose network is constructed utilizing neighborhood interactions, through which a parameter known as farmer's green consciousness (GC) is updated at each time step. The optimization module is instantiated at the end of each time step, and decision variables (the number of livestock units and land allocation) are assigned based on profitability and specified environmental impact categories. If only profit optimization is considered (i.e. when farmers’ GC is de-activated), the results show a 9% reduction in the aggregated environmental impacts (obtained as EF “single score”) and a 5.5% increase in overall profitability. At the farm level, simulations display a clear trade-off between environmental sustainability and financial stability, with a 25% reduction in overall emissions possible if farming activities are carried using the EF single score impact in the objective function, though this results in an 8% reduction in profitability over ten years.

The sustainability of agricultural commodities produced in the Southern U.S. under irrigation is increasingly at risk due to erratic rainfall patterns, inadequate water supplies and compromised water quality. This study assessed the needs of crop growers in the United States Department of Agriculture (USDA) Southern Region. The purpose was to identify growers’ critical water resource management concerns to identify research priorities from the perspective of growers in this region. To obtain this information, a questionnaire was developed and distributed to growers throughout the Southern Region in 2020. The final sample included 112 crop (row and specialty) production growers from the Southern Region. Overall, respondents named the water available to irrigate as the greatest water resource management priority. Within all the water availability priorities asked, respondents’ first choice was declining water supply in the future. Declining water supply and the cost of irrigating presently were the next most frequently named water availability priorities. Growers named both increasing the efficiency of irrigation and development of farming practices to improve soil moisture retention as the first and second focus of future irrigation research, respectively. These results will aid in strengthening existing and developing new initiatives for water research and Extension in this region.

Aflatoxin being a serious threat to public health and international trade, necessi-tates a comprehensive understanding and calculated response with effective inter-vention strategies. This review methodically looks at several aspects of aflatoxin, starting with how it affects international trade laws through feed and feed ingre-dient regulations. Aflatoxin contamination poses serious challenges to world health and the economy, especially in areas that are already at risk. Examining the varia-bles affecting aflatoxin toxicity, the paper clarifies aflatoxin toxicity's complex me-tabolism and the resulting health effects of exposure. The serious repercussions of aflatoxicosis outbreaks and their connections to illnesses like Aspergillosis and cancer are highlighted by a detailed exploration of prospective decontamination techniques as well as strategies for detecting and capturing aflatoxin. A thorough knowledge of the factors that contribute to aflatoxin contamination demonstrates the intricate interactions between environmental variables, farming methods, stor-age circumstances, and different physical, biological, and nutritional components. Strong detection strategies are required due to aflatoxins’ significant effects on an-imal and human health. The paper describes complete preventative tactics that en-compass manipulation in management strategies. global trade and public health from this pervasive threat.

Integrated crop-livestock production (ILP) is an interesting alternative for more sustainable soil use. However, more studies are needed to analyze soil pore properties under ILP at the micrometer scale. Thus, this study proposes a detailed analysis of soil pore architecture at the micrometer scale in three dimensions. For this purpose, samples of an Oxisol under ILP subjected to minimum tillage (MT) and no-tillage (NT) with ryegrass as cover crop (C) and silage (S) were investigated. The soil micromorphological properties of the soil were analyzed using X-ray microtomography. The MT(C) system showed the highest values of porosity (c. 20.4%), connectivity (c. 32.8×103), volume (c. 26%), and number of pores (c. 32%) in a rod-like shape. On the other hand, the MT(S), NT(C), and NT(S) systems showed higher tortuosities (c. 2.2, c. 2.0, and c. 2.1) and lower pore connectivities (c. 8.3×103, c. 6.9×103, and c. 6.2×103), especially in S use. Ellipsoidal and rod-shaped pores predominated over spheroidal and disc-shaped pores in all treatments. The results of this study show that the use of ryegrass as a cover crop improves soil physical properties, especially in MT. For S use, the type of soil management (MT or NT) did not show any differences.

In recent years, the rapid expansion of urban areas has led to changes in land use, a reduction in pervious surfaces, and a disturbance in the balance between surface waters and groundwater. These urban changes, combined with inadequate drainage systems and misdirection of runoff, have resulted in severe urban floods, causing numerous fatalities and damage to urban areas. As a result, investigating the effects of flood occurrences and determining proper mitigation measures to reduce flood damage is essential. This paper aims to establish a novel economic-hydrologic model to evaluate the efficacy of Low-impact Development (LID) measures in urban Bronx River catchment, NYC. The model examines reduced peak discharge of flood and imposed damage. Initially, the EPA’s SWMM is used to simulate urban flooding based on recent extreme events. LID scenarios are then implemented, including individual and combined scenarios, to mitigate the adverse impacts of flood occurrences of high to low frequency. By means of the HEC-GeoRAS tool, highly detailed flood inundation maps are generated and seamlessly incorporated into the flood damage estimation model, namely HAZUS, to obtain estimates of the potential damage caused by floods. Using the reduced monetary damages and the implementation cost of LID measures, the benefit-to-cost (BC) ratio is then calculated. Findings indicated that the combined LID scenario is the most effective approach in peak flow reduction. Moreover, Permeable pavement outperforms infiltration trench, bio retention cell, and rain barrel in terms of benefit-to-cost ratio, with rain barrel showing the lowest ratio. The proposed evaluation system for LID measures, with a focus on flood damage reduction as a key benefit, provides valuable insights for identifying optimal scenarios and facilitating informed decision-making.

The formation of hydrogen sulfide (H₂S) in petroleum reservoirs by anaerobic microbial activity is called biogenic souring of reservoirs and is a risk in the oil and gas industry as the compound is extremely toxic, flammable and corrosive. In this paper, we present a workflow and the tools to assess biogenic souring from a pragmatic engineering perspective. The retention of H₂S in the reservoir due to the reactions with iron-bearing rock minerals (e.g. siderite) is shown in a theoretical approach here and supported with literature data. Cases are given for two fields under secondary (waterflooding) and tertiary flooding with microbial enhanced oil recovery (MEOR). The use of the Monte Carlo method as a numerical modelling tool to incorporate uncertainties in the measured physical/chemical/ biochemical data is demonstrated as well. A list of studies conducted with different chemicals alone or in combination with various biocides to mitigate biogenic souring provides an overview of potential inhibitors as well as possible applications. Furthermore, the results of static and dynamic inhibition tests using molybdate are presented in more detail due to its promising mitigation ability. Finally, a three-step workflow for the risk assessment of biogenic souring and its possible mitigation is presented and discussed.

In the past few years, cloud-based additive manufacturing has shown its application and potential in industries. For this reason, when the demand for cloud-based additive products increases, efficient scheduling of related tasks becomes more important to achieve optimized duration. This research proposes a Heuristic Scheduling Algorithm (HSA) for use in Cloud-Based Additive Manufacturing (CBAM) with an approach to Critical Chain Buffer Management (CC/BM). This research aims to schedule and optimize the time in cloud-based additive manufacturing, in addition to the parts production process, it also includes the steps of receiving online orders and informing the manufacturing unit and sending them to the customer. The HSA proposed in this research consists of three phases 1- Buffer sizing, 2- Additive manufacturing and logistics scheduling, and 3- Buffer controlling. To evaluate, the performance of the algorithm is simulated. The finding shows that the proposed HAS can effectively solve the CBAM scheduling problem.

The digital transformation of critical infrastructures, such as energy or water distribution systems, is essential for their smart management. Faster issue identification and smoother services enable better adaptation to consumers' evolving demands. However, these large-scale infrastructures are often outdated. Their digital transformation is crucial to enable them supporting societies. This process must be carefully planned, providing guidance that ensures that the data they rely on is dependable and that the system remains fully operational during the transition. This paper presents a formal model that supports reliable data acquisition in legacy critical infrastructures, facilitating their evolution towards a data-driven smart system. Our model provides the foundation for a flexible transformation process while generating dependable data for system management. We demonstrate the model's applicability in a use case within the water distribution domain and discuss its benefits.

Knowledge of clinical approaches and barriers in managing childhood myopia is limited. This study explores optometrists' knowledge, attitude, and practice towards childhood myopia. A 26-item survey was circulated online among practising optometrists in India. The questionnaire assessed the demographics, knowledge, self-reported clinical practice behaviour, barriers, source of information guiding their management, and extent of adult caregiver engagement for childhood myopia. Of 393 responses, a significant proportion of respondents (32.6%–92.4%) were unaware of the ocular complications associated with high myopia, with less than half (46.5%) routinely measuring axial length in clinical practice. Despite the improved awareness of emerging myopia management options, the uptake remains generally poor, with single-vision distance full correction spectacles (70.3%) being the most common mode of vision correction. Barriers to adopting emerging evidence are medico-legal concerns and the absence of clinical practice guidelines. Original research articles were the primary source of information supporting clinical practice. Most (>70%) respondents considered involving the adult caregiver in their child's clinical decision-making process. While practitioner knowledge, perspective, and practice are improving, childhood myopia management evidence is constantly evolving and remains inconclusive. Evidence-based practice guidelines and continuing education on myopia control might be helpful for practitioners in improving their clinical decision-making skills.

Feedback from the earthquake zone in Kahramanmaraş, Turkey has established that the emerging field of Crisis Translation and Interpreting (CTInt) requires a free smartphone application, to enable Crisis Translators and Interpreters (CTIs) to access multilingual terminology resources on-/offline when assisting Search and Rescue (SAR) teams responding to man-made and/or natural disasters.The aim is to design not only a multilingual compilation of Crisis Terminology (CTerm), downloadable to smartphones enabling access when there is a failure in the internet connection, but also a unified search tool which will browse and redirect the user to existing termbanks when the internet is accessible. Nevertheless, terminological records available in the domain of CTerm are inadequate and dispersed, with different interfaces and language combinations, requiring enhancement and harmonisation. Furthermore, automated translation and interpreting software/systems supported by the multilingual compilation of the crisis terminology portal (CTermPort) ideally need to be developed or, alternatively, existing ones integrated into the crisis termbank (CTermBank) collection for those who would lack the support of CTIs.The design of the CTermPort will significantly impact civil societies by providing a lifesaving tool for CTIs who need a reliable terminological reference point and automated translation options, and those unable to be assisted. In this respect, the project also promises strong prospects of sustainability past the project duration, as the tool to be developed will serve international SAR teams working closely with CInts during response times, but also medical staff in field hospitals collaborating with CTIs in rehabilitation and recovery phases, and beyond.

Machine learning has become more prevalent as a tool used for biogeochemical analysis in agricultural management. However, a common drawback of machine learning models is the lack of interpretability, as they are black boxes that provide little insight into agricultural management. To overcome this limitation, we compared three tree-based models (decision tree, random forest, and gradient boosting) to explain soil organic matter content through Shapley additive explanations (SHAP). Here, we used nationwide data on field crops, soil, terrain, and climate across South Korea (n = 9,584). Using the SHAP method, we identified common primary controls of the models, for example, regions with precipitation levels above 1400 mm and exchangeable potassium levels exceeding 1 cmol+ kg-1, which favor enhanced organic matter in the soil. Different models identified different impacts of nutrients on the organic matter level in the soil. The SHAP method is practical for assessing whether different machine learning models yield consistent findings in addressing these inquiries. Increasing the explainability of these models means determining essential variables related to soil organic matter management and understanding their associations for specific instances.

This study outlines a comprehensive examination of risks and hazards in three egg sorting and packing stations, covering the entire process from supplier selection and evaluation to egg delivery in chain stores. The analysis is conducted within the framework of Codex Alimentarius and GFSI-integrated food safety programs. Salmonella is the greatest significant threat. To enhance the Hazard Analysis of Critical Control Points (HACCP), preparatory programs were incorporated into the quality management system (QMS) by monitoring and assessing the biological, chemical, and physical threats according to Code Alimentarius and further integrated into GFSI food safety programs, including food authenticity and food defense. The procedure offered sophisticated preventive tools, hand-on at any time, for eliminating, reducing, or mitigating the risks encountered in egg packing and sorting facilities.

This study considers the values of the credit payments that are made at random values for both payment size and number. The simultaneous existence of the two random variables increases the total value of the volatility of the payment process. The dependence for the simultaneous influence of the two random variables is derived by applying conditional probabilistic formulations. Formal relations apply to animal husbandry credit payments. The credit policy was analyzed for the cases of regular payments and with a stochastic number of payments. A recommendation for the upper level of credit payments is proposed based on a model predictive approach using historical payment data. A credit management algorithm is derived, in which decision-making for credit payments is formally derived and numerically discussed. The application of derived quantitative relations is empirically applied to real data on animal husbandry. The recommendations from the dependencies obtained allow a reduction in the mean values of credit payments, which correspond to a reduction in the credits used for business management, without a change in business policy.

Accountable Care Organizations (ACOs) are healthcare delivery systems that aim to coordinate and improve the quality of care for patients while reducing costs. ACOs bring together doctors, hospitals, and other healthcare providers to work as a team to care for a defined population of patients. The idea behind ACOs is to shift the focus from paying for each individual service provided to patients, known as fee-for-service, to paying for the overall care and well-being of patients.ACOs typically operate under a shared savings model and also encourages providers to use data and technology to better coordinate care and improve patient outcomes.ACOs can be physician-led organizations, hospital-led organizations, and collaborations between healthcare providers. The success of ACOs depends on many factors, including the level of cooperation and collaboration among healthcare providers, the quality of care provided, and the ability to effectively manage costs.Despite their potential benefits, ACOs also face challenges, including the difficulty of coordinating care across multiple healthcare providers, the need to invest in technology and data management systems, and the challenge of changing provider behavior.This study assessed a number of systemic reviews and journals to assess the impact of ACO’s on population health. ACO’s have shifted away from costly care patterns and thus helped many countries.

Understanding aspects of maritime/underwater cultural heritage (MUCH) and the associated cultural values and integrating them into maritime spatial planning (MSP) endeavors, is a new global challenge, alongside the rapid increase of human activities at sea and climate change impacts on the seas and the oceans. The article highlights the significance of cultural values in shaping human interactions with the marine environments, and how MSP can address the cultural dimensions of marine resources management. To this end, a systematic literature review was carried out to address the research question on how maritime/underwater cultural heritage is incorporated into MSP and map relevant academic literature. Following, a methodology that entailed an academic database search and the application of exclusion criteria, 346 articles resulted from Scopus. These articles were classified using science mapping techniques (i.e the VOSviewer Software ) and several categories (clusters) were created. The research showed a diversity of literature addressing the relationship between MUCH and MSP with a strong focus on sustainability, the significance of cultural ecosystem services (CES) and cultural values, the role of indigenous and local communities, but also of local stakeholders, the transfer of traditional knowledge to MSP and the participatory approaches and tools. The article concludes that for MSPlans to be innovative and acceptable by local communities, the “missing layer”of socio-cultural values and data is indispensable. In the MSP process, MUCH should be understood within this broader framework of socio-cultural considerations and values.

Efforts to enhance carbon storage in forest ecosystems through policy and management decisions rely on accurate forest biomass assessments. However, most forest inventories consider tree mortality the only form of aboveground biomass loss, overlooking other important factors, such as wood decay in living trees. In this study, using linear mixed-effects models, we delve into the sustainability of mature and over-mature deciduous forests in Latvia by conducting a comprehensive analysis of stem rot severity, identifying species for which the impact of stem rot on their carbon stock reduction was most significant. The analysis focused on determining the proportion of discolored wood, decomposed wood, and hollow spaces within the stems of 190 living deciduous trees commonly found in hemiboreal forests. The study reveals a greater extent of stem rot and more extensive decay in Populus tremula trees than in Betula spp., Alnus glutinosa, and Alnus incana. It emphasizes the influence of tree species, age, and diameter at breast height on stem rot proportions. The stump rot area significantly predicts the amount of decomposed and discolored wood within the stem. The study provides valuable insights for sustainable forestry practices and highlights challenges in estimating stem rot severity, emphasizing the need for comprehensive diagnostic methods.

The transition of the energy system to renewable sources means the cheap energy storage in fossil fuels must be replaced by other options. A large part of the demand for useful energy is heat and cold, often produced from electric energy by a resistance heater, compression heat pump or cooler. The question is then to store the initial electric energy by electric energy storage (EES) or the useful energy by thermal energy storage (TES). In a desktop study both options were compared, by the choice made in existing applications, and also generally analyzing current technology data. For the latter, cost, round-trip efficiencies, life cycles and life time of EES, specifically for batteries, and of TES, specifically for hot and cold water, ice and other PCM were collected. Applications studied are heating and cooling in buildings and in industry. Application-typical conversion efficiencies were also collected and taken into account. The results show that in many existing installations TES, incl. by PCM, is already preferred, and that TES is advantageous in most investigated applications economically, in addition to technical advantages. Thus, TES has a large potential in the transition of the energy system to stabilize the electricity grid by demand side management.

Key elements of Blue-Green Infrastructure are vegetation and stormwater storage. A combination of a bioretention cell with an underlying trench (BC-T) serving as a tree pit is often used in dense urban environments. An adequate ratio of drained area to bioretention cell area is a crucial design parameter. The ratio is derived from the hydrological balance; however, input data are often difficult to obtain or uncertain. The goal is to study the sensitivity of such data (tree water uptake and water holding capacities of soil filter and trench substrate) in the BC-T design. Sensitivity analysis is performed for the setup of a BC-T used in Prague, Czech Republic. A 10-year rainfall series (1 hour resolution) is used as an input. Data that are subject to the sensitivity analysis are changed for different trench exfiltration rates, and the effect on the size of the drained area is studied. At low trench exfiltration rates (1.8 mm.h-1), both the water holding capacity of the trench substrate and potential tree water uptake have a significant influence (more than a 20% change in the size of the drained area) and cannot be neglected. At good exfiltration rates (more than 18 mm.h-1) or when the trench is equipped with an underdrain, all studied parameters can be neglected. However, it is recommended to reduce the size of the drained area by 10-20%.

The Savu Sea holds significant importance as a conservation area in Indonesia, providing sustenance and livelihoods for local communities. It is situated within the Coral Triangle, a critical hotspot for marine biodiversity worldwide. However, the Savu Sea is currently facing various threats, including overfishing, pollution, and the impacts of climate change. Effective management of this conservation area relies heavily on the active participation of local communities. Therefore, this study aims to address this issue by analyzing how factors within these communities, such as the socio-economic condition of coastal households, environmental awareness, the existence of community-based conservation areas, attitudes towards activities within the conservation area, and participation in multistakeholder institutions, contribute to a positive perception of the benefits provided by the Savu conservation area. To determine the complex causal conditions that influence the outcome of perception, the study employs the Qualitative Comparative Analysis (QCA) method, specifically using crisp set QCA (csQCA). A survey was conducted among 22 coastal villages surrounding the Savu Sea, resulting in the identification of 14 different combinations of pathways that contribute to varying levels of perception regarding conservation. Valuable lessons can be drawn from this study to enhance the design of policies aimed at effectively managing the Savu conservation area.

There are strong indications that the built environment intertwines consistently with the advent of Covid-19 and the need for post-disaster recovery. The advent of the Covid-19 pandemic has exerted adverse effects on both human and global developments; while the efforts to combat this menace call for an integrated human social capital index. This research seeks to adequately enhance the comprehension of how the built environment can be enhanced through resilience in the backdrop of the Covid-19 pandemic. The study's goal is to investigate the impact of a resilient built environment on increasing resilience in the aftermath of the Covid-19 pandemic in Nigeria. Overall, the quantitative study test the impact of four built environments resilience indices (Built Environment capitals; Disaster management indices, Awareness of the Covid-19 Pandemic, and Built Environment adaptive strategies) on Human social capital and Covid-19 pandemic Indices. This study reveals the role of human social capital in achieving a resilient built environment in the wake of Covid 19 pandemic in Nigeria. Also, built environment capitals, disaster management indices, and awareness on the Covid-19 have indirect effects on Covid-19 pandemic indices through the human social capital. The implication of the study is useful for Post-Covid 19 recovery; which is important for future planning of the built environment in Nigeria.

In this study, a novel two-layer control scheme aimed at enhancing the dynamic performance of a nonlinear vehicle through the utilization of an optimal control approach grounded in predictive control principles is presented. The first layer of our control system focuses on the computation of an optimized rotational torque that ensures lateral dynamic stability. This torque is subsequently translated into differential forces acting on the wheels, employing the inverse tire model to derive the desired longitudinal slips. These slip values are then transmitted to the second layer of our control system. In the second layer, the electric motors associated with the vehicle's wheels dynamically adjust the input torque to accurately track the desired slip, thereby ensuring the overall stability of the electric vehicle. In view of the paramount importance of energy consumption in electric vehicles, we adopt optimal control strategies to substantially minimize battery utilization. To this end, careful selection of appropriate weighting coefficients in the control laws enables us to maintain the electric motors within their permissible operational range while simultaneously minimizing battery energy consumption for desired slip tracking. Extensive simulation results validate the effectiveness of our proposed control system in proficiently managing nonlinear effects and safeguarding the vehicle's stability.

Worldwide, the COVID-19 pandemic, which was brought on by the brand-new coronavirus SARS-CoV-2, has claimed a sizable number of lives. Despite the urgency, COVID-19 does not have any particular antiviral treatments at this time. As a result, scientists are concentrating on repurposing already existing antiviral medications or creating brand-new ones. The SARS-CoV-2 main protease, which is necessary for viral replication, has been identified as a possible target for a family of medicines called main protease inhibitors (MPIs). Studies of the major proteases from SARS-CoV and MERS-CoV, which have remarkably similar structures and functions to SARS-CoV-2, have provided insight for the creation of MPIs. By analyzing the MPI trials for SARS-CoV and MERS-CoV, this review sheds light on the possible therapeutic uses of MPIs for COVID-19. The review talks about how MPIs work, how effective they are against SARS-CoV and MERS-CoV, and how safe they are. The paper also emphasizes current developments in the creation of MPIs for SARS-CoV-2, including as computational studies, in vitro and in vivo research, and clinical trials. According to the review, there is a lot of hope for MPIs in the treatment of COVID-19, and numerous medications are in the works. Although more research is needed to assess their safety and effectiveness in clinical settings, these medications may offer patients with COVID-19 a much-needed therapeutic option. The review also emphasizes the importance of ongoing research into the structure and function of the SARS-CoV-2 main protease, as this information will be critical for the development of effective MPIs and other antiviral drugs in the future.

The Covid-19 pandemic and the subsequent implementation of lockdown measures have significantly impacted global electricity consumption, necessitating accurate energy consumption forecasts for optimal energy generation and distribution during a pandemic. In this study, we propose a new forecasting model called the Multivariate Multilayered LSTM with Covid-19 case injection ($\proposedModel$) for improved energy forecast during the next occurrence of a similar pandemic. We utilize data from commercial buildings in Melbourne, Australia during the Covid-19 pandemic to predict energy consumption and evaluate the model's performance against commonly used methods such as LSTM, Bi-LSTM, Linear Regression, Support Vector Machine and the previously published work of Multilayered LSTM (M-LSTM). The proposed forecasting model was analyzed using the following metrics of mean percent absolute error (MPAE), normalized root mean square error (NRMSE), and $R^2$ score values. The model $\proposedModel$ demonstrates superior performance, achieving the lowest MPAE values of 0.061, 0.093, and 0.158 for data sets from 3 different buildings, respectively. Our results highlight the improved precision and accuracy of the model, providing valuable information for energy management and decision-making during the challenges posed by the occurrence of a pandemic like Covid-19 in the future.

The number of disputes related to water that reach courts in Chile has increased in the last decades, the topics of these disputes have become more complex, and the current conflict resolution system has not been able to adjust to this situation. This study analyses colonial texts from water-related conflicts that were addressed at the Royal Hearings in Santiago (1691-1800) and from the Cabildo gatherings (1541-1802), using an adaptation of the Institutional Analysis and Development framework. The research shows a strong institutional system surrounding conflict resolution during colonial times, with nested schemes and empowered figures appointed in leading roles. However, a lack of equity and inclusion of all actors is also visible, reducing its legitimacy. At present, the increasing value of water and a sense of distrust in the institutional system have led to longer and more complex conflict resolution processes. Here, learning from past times about the empowerment of the institutional system for solving water disputes could be useful. An increased support towards initial conflict resolution mechanisms, giving space for local knowledge and generating stronger participation in these initial steps, could also be a lesson for the future.

(1) Background: This case presents a rare and challenging clinical scenario involving a 50-year-old female patient diagnosed with Inflammatory Carcinoma, a particularly aggressive and rapidly growing form of breast cancer. The disease is characterized by heat, redness, swelling and noticeable changes in the breast's skin texture, resembling the skin of an orange (peau d'orange). This case is important because it contributes to the limited clinical literature on such aggressive forms of breast cancer.; (2) Methods: The multidisciplinary approach was employed. Diagnostic procedures such as imaging tests, biopsy, and histopathological examination were performed to confirm the diagnosis of Inflammatory Carcinoma and assess the extent of the disease. The presence of the HER2 protein on the tumor cells supported the selection of a combination therapy involving systemic chemotherapy and targeted biological therapy.; (3) Results: The patient responded positively to the combination therapy consisting of systemic chemotherapy and targeted biological therapy. The aggressive nature of Inflammatory Carcinoma, characterized by rapid growth and distinct skin changes, was effectively addressed. The presence of the HER2 protein on the tumor cells indicated the potential efficacy of the combination therapy in aggressive forms of breast cancer.; (4) Conclusions: This case highlights the critical importance of a multidisciplinary approach in managing complex cases of breast cancer, especially rare and aggressive subtypes like Inflammatory Carcinoma. The positive response of the patient to the combination therapy involving systemic chemotherapy and targeted biological therapy demonstrates the potential for favorable outcomes in aggressive disease presentations.

To date, only a few studies focused on carbon monoxide (CO) production during waste composting; all targeted on CO inside piles. Here, the CO net emissions from compost piles and the assessment of worker’s occupational risk of exposure to CO at large-scale composting plants are shown for the first time. CO net emissions were measured at two plants processing green waste, sewage sludge, or undersize fraction of municipal solid waste. Effects of the location of piles (hermetised hall vs. open yard) and turning (before vs. after) were studied. Higher CO net emission rates were observed from piles located in a closed hall. The average CO flux before turning was 23.25 and 0.60 mg‧m-2‧h-1 for hermetised and open piles, respectively, while after – 69.38 and 5.11 mg‧m-2‧h-1. The maximum CO net emissions occurred after the compost was turned (1.7x to 13.7x higher than before turning). The top sections of hermetised piles had greater CO emissions compared to sides. Additionally, 5% of measurement points of hermetised piles switched to ‘CO sinks’. The 1-h concentration in hermetised composting hall can reach max. ~50 mg CO∙m-3 before turning, and >115 mg CO∙m-3 after, exceeding the WHO thresholds for a 1-h and 15-min exposures, respectively.

Background and Objectives: Elders’ needs are rarely examined beforehand, and thus, although technology-based tools can enhance self-management, acceptability rates are still low. This study aimed to examine and compare self-reported needs, priorities, and preferences of elders with heart failure (HF), diabetes mellitus (DM), and chronic obstructive pulmonary disease (COPD) toward technology use to enhance self-management. Materials and Methods: A convenience sample of 473 participants over 60s (60.5% females), diagnosed with HF (N=156), DM (N=164), or COPD (N=153) was recruited. They were administered a questionnaire about the usefulness of technology in general and in specific areas of disease management. Results: Most participants (84.7%) admitted that technology is needed for better disease management. This was equally recognized across the three groups both for the overall and specific areas of disease management (in order of priority: ‘Information’, ‘Communication with Physicians & Caregivers’, and ‘Quality of Life & Wellbeing’). Sociodemographic differences were found. Cell phones and PCs were the devices of preference. The four common features prioritized by all three groups were related to ‘information about disease management’ (i.e., monitoring symptoms, reminders for medication intake, management and prevention of complications), whereas the fifth one was related to ‘communication with physicians and caregivers (i.e., in case of abnormal or critical signs). The top disease-specific feature was also monitoring systems (of respiratory rate or blood sugar or blood pressure, oxygen), whereas other disease-specific features followed (i.e., maintaining normal weight for HF patients, adjusting insulin dose for DM patients, and training on breathing exercises for COPD patients). Conclusions: Elders in these three samples seem receptive to technology in disease management. mHealth tools, incorporating both common and disease-specific features and addressing different chronic patients, and being personalized at the same time, could be cost-saving and useful adjuncts in routine clinical care to improve self-management.

Wildlife tourism and wildlife trade may appear juxtaposed, but are two, potentially aligning, income generators that could benefit conservation in developing countries. Utilising data sets collated from Madagascar’s Ministère du Tourisme and CITES respectively for the period 2007 to 2018, this study estimated levels of income from wildlife tourism and wildlife trade for Madagascar. Between 2007-2018, tourism reported yearly incomes ranging from a low of US $1.4 million up to a high of US $15.7 million. However, it was unclear what percentage of this figure flowed to benefit local communities. Alternatively, using reported networks for the live wildlife trade, the estimated economic value reaching collectors and/or intermediaries on Madagascar was US $72,299.80 for the period 2007 to 2018. Both revenue generators operated within different geographical areas, with tourism opportunities presenting themselves to communities adjacent NPs, while wildlife trade networks were not restricted to NPs and operated sporadically across Madagascar. Hence, the economic benefits reached different Malagasy participants across the country. The management of both activities needs great care to ensure that environmental impacts and sustainability are core measures on any such activities. Whilst this study shines light on economic values and novel perspectives regarding these two trade types, it also highlighted knowledge gaps. Thus, indicating where much greater research attentions was required to allow better understanding of the specific benefits and risks from engaging with both trade types for local Malagasy people and their environments.

Deep brain stimulation (DBS) is an effective and safe medical treatment that improves the lives of patients with a wide range of neurological and psychiatric diseases, and has been consolidated as a first-line tool in the last two decades. Closed loop deep brain stimulation (CLDBS) pushes this tool further by automatically adjusting the stimulation parameters to the brain response in real-time. This paper presents a CLDBS with 2 stimulation channels and 2 acquisition channels. Each channel has a low-noise amplifier (LNA) buffer in differential configuration to eliminate the DC signal component of the input. Energy management is efficiently done by the control and communication unit. The battery supports almost 9 hours with both the acquisition and stimulation circuits active. If only the stimulation circuit is used as an Open Loop DBS (OLDBS), the battery can hold sufficient voltage for 24 hours of operation. The whole system is low-cost and portable and therefore it could be used as a wearable.

Patients with polycythemia vera (PV) are at increased risk of thrombosis and hemorrhages. Although hydroxyurea (HU) has been the frontline therapy for patients at high-risk of vascular complications, about 25% of patients develop resistance/intolerance to this therapy. The aim of this non-interventional, multicenter cohort study was to understand the clinical characteristics and HU treatment response of Portuguese PV patients. HU resistance/intolerance was defined according to adjusted European LeukemiaNet (ELN) criteria. 134 PV patients with a mean disease duration of 4.8±5.0 years were included and followed up for 2 years. At baseline, most patients were ≥60 years old (83.2%), at high risk for thrombotic events (87.2%), and receiving HU therapy (79.1%). A total of 10 thrombotic events and 8 hemorrhagic events were reported, resulting in a 5-year probability of thrombo-hemorrhagic events of 17.2%. Hematocrit (p=0.007), hemoglobin (p=0.012) and MPN10 symptom score (12.0±11.6 vs 10.3±9.1; p=0.041) decreased significantly at the 24-month visit compared to baseline. Overall, 75.9% of patients met at least one of the adjusted ELN criteria for HU resistance. 14.4% of patients remained on HU throughout the study. The results from this real-world study may help identify the subset of patients at higher risk of disease sequelae who may benefit from earlier second-line treatment.

Linear programming formulations of forest ecosystem management (FEM) problems proposed in the 60s have been adapted and improved upon over the years. Generating management alternatives for forest management planning is a key step in building these models. Global forests are diverse, and a variety of models have been developed to simulate management alternatives. Climate change has made forest management calculations even more complex, requiring flexibility, diverse parameters, models, and methods. Despite this complexity, consistent concepts can be applied in developing management alternatives for forest management planning. This work describes iGen, a flexible forest prescription generator that applies the AI technique Rule-Based System (AI-RBS). iGen projects the state and associated inputs and outputs for a set of management units using rules from its knowledge base. An Inference Engine uses the rules to simulate a set of prescriptions in a tree-like graph structure. Without needing IT specialists, forest managers can describe the potential development of their forest through variables, rules, formulas, functions, and procedures. A key feature of iGen is that it is not limited to, adapted to, or focused on any specific region, landscape, forest condition, projection method, or yield function. Instead, it aims to maximize generality, enabling it to address a broad range of FEM problems. This article introduces iGen, explaining its concepts, structure, and algorithms through two FEM problems: natural regeneration with shelterwood harvests and plantation/coppice. For data and iGen source programs, visit github.com/…/iGen.

With the spread of compulsory education emerged school management problems continued, and the quality of school management in compulsory education has attracted a great deal of attention in China. However, the application of information technology in the field is not yet detailed and wide, resulting in problems of heavy workload and high difficulty in the whole evaluation process. Accordingly, we use big data technologies such as Apache Spark, Apache Hive, and SPSS to carry out data cleaning, correlation analysis, dynamic factor analysis, principal component analysis, and visual display on 1760 sample data from 40 primary and secondary schools in Q Province in China, and constructs a model school management of quality evaluation in the compulsory education stage, which reduces the 22 management tasks required for previous evaluation to 5, greatly reducing the workload and difficulty of evaluation. It has improved the efficiency and accuracy of evaluation, and further promoted the simultaneous development of education of five domains and education equity in the compulsory education stage.

Saltwater intrusion in the rapidly developing city of Da Nang in central Vietnam is currently causing various water-related challenges, including inadequate water supply and water pollution. An integrated SWAT-MODFLOW numerical model was used to investigate the origin and mechanism of saltwater in Holocene and Pleistocene aquifers. Geophysical and isotopic approaches were used to validate the SEAWAT model applied for simulating saltwater intrusion. The results suggest that the ebb and flow of tides, as well as water levels in rivers primarily impact coastal aquifers. However, effective water resource planning and management, along with maintaining the natural recharge of fresh water from local rain during the rainy season, could enable the rational and efficient utilization of groundwater, reducing saltwater intrusion in many areas. During the dry season, groundwater is recharged from higher altitude areas. The current saltwater intrusion mainly occurs along the rivers up to the hydraulic dam. Simulated models, using scenarios of stop abstracting groundwater, but changing to the use of surface water for drinking water, show that the area of saline water shrinks quickly after 30 years, reducing from 59.6 km2 to 39.5 km2 and from 40.2 km2 to 28.6 km2 in Holocene and Pleistocene, respectively.

The purpose of this research is to present a thorough evaluation of the energy management system, which consists of hybrid energy storage systems, and its control algorithms, which may be used in electric vehicles. This paper outlines the characteristics of electric vehicles, research methods, analysis of the hybrid energy storage system architecture, converter topology, and energy management techniques. The strength and co-occurrence of keywords over the past ten years are shown in this study using a systematic research framework for performing a literature review and using keyword analysis techniques. The study reveals a pattern of recently and frequently used terms in works of literature. Consequently, their suitability, benefits, and drawbacks are assessed. In this study, the hybrid energy storage system and converter circuit architecture are evaluated and rated. Non-isolate DC-DC converter converter connected to SC is a suitable configuration for the hybrid converter because it is simple to build, reliable, and has minimal loss/weight/cost, which improves vehicle performance. In terms of the application of control strategies, it is shown that deterministic and fuzzy rule-based control techniques are successfully assessed using real-scale vehicle experiments and selected for manufacturing. On the other hand, real-time optimization-based energy management techniques have been effectively shown in lab-scale tests and may be used in a future real-scale vehicle.

Red mud (RM) is a residue obtained from the production of alumina. It contains a high concentration of metal oxides and waste concentrated sodium hydroxide solution (pH = 13). To increase the value of RM, an environmentally friendly process of transesterification using waste cooking oil (WCO), MeOH and concentrated sodium hydroxide solution (CSHS) from aluminum production was proposed. Triglycerides of WCO reacted with MeOH at 60 oC to yield mixtures of fatty acid methyl esters (FAMEs) in the presence of 2.03% (w/w) CSHS/WCO using the CSHS (0.204 mol L-1, predetermined by potentiometric titration) from aluminum production by the Bayer process or with the addition of 0.68% (w/w) fabric softener (3% w/w cetyltrimethylammonium chloride in solution) as a phase transfer (PTA) agent. The addition of PTA to the catalyst resulted in a better yield of the products (greater than 98% yield). A simplified mechanism is presented to account for the experimental results.

Nuclear technologies have the potential to play a major role in the transition to a global net-zero society. Their primary advantage is the capability to deliver controllable 24/7 energy on demand. However, as a prerequisite for successful worldwide application, significant innovation will be required to create the nuclear systems of the 21st century, the need of the hour. The pros and cons of nuclear are discussed and analysed at different levels – the societal and public recognition as well as the scientific/engineering and economic level – to assure a demand driven development. Based on the analysis of the different challenges a vision for the nuclear system of the 21st century is synthesised consisting of three pillars – unlimited nuclear energy, zero waste nuclear, and accident free nuclear. These three combined visions are then transformed into dedicated and verifiable missions which are discussed in detail regarding challenges and opportunities. In the following a stepwise approach for the development of such a highly innovative nuclear system is described. Essential steps to assure active risk reduction and the delivery of quick progress are derived as answer to the critique on the currently observed extensive construction time and cost overruns on new nuclear plants. The 4-step process consisting of basic studies, experimental zero power reactor, small scale demonstrator, and industrial demonstrator is described. The 4 steps including sub-steps deliver the pathway to a successful implementation of such a ground breaking new nuclear system. The potential sub-steps are discussed with the view not only onto the scientific development challenges, but also as an approach to reduce the regulatory challenges of a novel nuclear technology.

The threat posed by climate change, the progressive erosion of natural resources, the polluting effects related to private motorization, energy waste, excessive consumption of agricultural and natural soils and their progressive waterproofing and reduction in vegetation cover, with the subsequent environmental degradation, have highlighted the need for a sustainable management of natural resources, in terms of an equitable and ethical development, to build inclusive communities able to adapt to the negative effects of emergency phenomena, through new capacities of economic, cultural and social resilience. This contribution presents the results of the activities conducted in the RivEr/Generation_LAB, a project organized by three CIVIS members (Sapienza University of Rome, Universitè libre de Bruxelles, Universidad Autonoma de Madrid) as a part of the CIVIS Project "RivEr/Generation_LAB. Linking resilience with inclusiveness in the urban built environment of Rome, Brussels, and Madrid", financed into the Hub4 Cities, Territories & Mobilities’ Call for proposals 2021. The project proposes a methodology of intervention in the Flaminio district, in particular on the 'Olympic Village' and its relationship with the Tiber River, in line with the Sustainable Development Goals, the Millennium Ecosystem Assessment and the New European Bauhaus, to establish new relationships between cities and the natural environment, favouring sustainable and inclusive public spaces.

The thoracic surgery has increased drastically in recent years, especially in the light of the severe outbreak of 2019 novel coronavirus disease (COVID-19). Routine “passive” chest computed tomography (CT) screening of inpatients detects some pulmonary diseases requiring thoracic surgeries timely. As an essential device for thoracic anesthesia, the double-lumen tube (DLT) is particularly important for anesthesia and surgery. With the continuous upgrading of the DLTs and the widespread use of the fiberoptic bronchoscopy (FOB), the position of DLT in thoracic surgery is gradually becoming more stable and easier to observe or adjust. However, the DLT malposition still occurs during transferring patients from supine to lateral position in thoracic surgery, which leads to lung isolation failure and hypoxemia during one-lung ventilation (OLV). Recently some innovative DLTs or improved intervention methods have shown good results in reducing the incidence of DLT malposition. This review aims to summarize the recent studies of the incidence of left-sided DLT malposition, the reasons and effects of malposition, and summarize current methods for reducing DLT malposition and prospects for possible approaches. Meanwhile, we use bibliometric analysis to summarize the research trends and hot spots of the DLT research.

Based on the example of wintering waterbirds in the Baltic Sea, we show a method that is useful in setting priorities for species management. The Value Factor (VF) shows which species in the region are the most valuable and on which ones conservation measures need to focus. Every year 4,400,000 waterbirds winter in the Baltic. Among which the highest priority species are velvet scoter Melanitta fusca (VS, VF=153) and long-tailed duck Clangula hyemalis (LTD, VF=204): 74% and 40%, respectively, of the world populations and over 90% of the EU populations of both species spend the winter there. Management plans (MP) regulating the protection of marine Natura 2000 sites (MPA) and dedicated to the protection of VS and LTD have been implemented in 65% and 51%, respectively, of MPAs in the Baltic. Poland, a key country for the survival of these species, has not implemented a single MP despite the existence of documentation confirming their crucial importance for seaducks, and on the pressures occurring there. We suggest using the VF concept to define priority species. On this basis, it will be possible to identify gaps in the protection of the most seriously threatened species and implement conservation measures in the most appropriate sites

Grinding processes’ stochastic nature poses a challenge in predicting the quality of the resulting surfaces. Post-production measurements for form, surface roughness, and circumferential waviness are commonly performed due to infeasibility in measuring all quality parameters during the grinding operation. Therefore, it is challenging to diagnose the root cause of quality deviations in real-time resulting from variations in the machine’s operating condition. This paper introduces a novel approach to predicting the overall quality of the individual parts. The grinder is equipped with sensors to implement condition-based maintenance and is induced with five frequently occurring failure conditions for the experimental test runs. The crucial quality parameters are measured for the produced parts. Fuzzy c-means (FCM) and Hotelling’s T-squared (T2) have been evaluated to generate quality labels from the multi-variate quality data. Benchmarked random forest regression models are trained using fault diagnosis feature set and quality labels. Quality labels from the T2 statistic of quality parameters are preferred over FCM approach for their repeatability. The model, trained from T2 labels achieves more than 94% accuracy when compared to the measured ring disposition. The predicted overall quality using the sensors’ feature set is compared against the threshold to reach a trustworthy maintenance decision.

The current availability of electronic health records represents an excellent research opportunity on multimorbidity, one of the most relevant public health problems nowadays. However, it also poses a methodological challenge due to the current lack of tools to access, harmonize and reuse research datasets. In FAIR4Health, a European Horizon 2020 project, a workflow to implement the FAIR (Findability, Accessibility, Interoperability, and Reusability) principles on health datasets was developed, as well as two tools aimed at facilitating the transformation of raw datasets into FAIR ones and the preservation of data privacy. As part of this project, we conducted a multicentric retrospective observational study to apply the aforementioned FAIR implementation workflow and tools to five European health datasets for research on multimorbidity. We applied a federated frequent pattern growth association algorithm to identify the most frequent combinations of chronic diseases and their association with mortality risk. We identified several multimorbidity patterns clinically plausible and consistent with the bibliography, some of which were strongly associated with mortality. Our results show the usefulness of the solution developed in FAIR4Health to overcome the difficulties in data management and highlight the importance of implementing a FAIR data policy to accelerate responsible health research.

This paper considered the issue of agricultural fields boundary recognition in satellite images. A novel algorithm based on the aggregated history of vegetation index data obtained via open satellite data, Sentinel-2, was proposed. The proposed algorithm included several basic steps, namely the detection of parcel regions on aggregated index data; the calculation of aggregated edge maps; the segmentation of parcel regions using the edges obtained; the computation of connected components and their contour extraction. In this paper, we showed that the use of aggregated vegetation index data and boundary maps allow for much more accurate agricultural field segmentation compared to the instant vegetation index approach. The quality of segmentation within regions of Russia and the Ukraine was estimated. The dataset that was used and Python implementation of the proposed algorithm were provided.

Telehealth is the delivery of many health care services and technologies to individuals at different geographical areas and is categorized as asynchronously or synchronously. The coronavirus disease 2019 (COVID-19) pandemic has caused major disruptions in health care delivery to breast cancer (BCa) patients and there is increasing demand for telehealth services. Globally, telehealth has become an essential means of communication between patient and health care provider. The application of telehealth to the treatment of BCa patients is evolving and increasingly research has demonstrated its feasibility and effectiveness in improving clinical, psychological and social outcomes. Two areas of telehealth that have significantly grown in the past decade and particularly since the beginning of the COVID-19 pandemic are telerehabilitation and teleoncology. There two technological systems provides opportunities at every stage of the cancer care continuum for BCa patients. We conducted a systematic literature review that examined the use of telehealth services via its various modes of delivery among BCa patients particularly in areas of screening, diagnosis, treatment modalities, as well as satisfaction among patients and health care professionals. The advantages of telehealth models of service and delivery challenges in delivery to patients in remote arears are discussed.

The present study aims to identify tomato (Solanum lycopersicum L.) cultivars with weed-suppressive ability against target weed species in the tomato growing season. A greenhouse study was conducted with 17 tomato cultivars and target weeds Palmer amaranth (Amaranthus palmeri S. Wats), yellow nutsedge (Cyperus esculentus L.), and large crabgrass (Digitaria sanguinalis L.). Tomato plants and weed species were grown in the same pot. The height, chlorophyll, and dry weight biomass of the weeds were measured 28 days after sowing. The largest effect of tomato interference was on Palmer amaranth. Cultivar 15 reduced Palmer amaranth height, chlorophyll, and biomass by 58, 28, and 83%, respectively. Chlorophyll percentage of yellow nutsedge seedlings was suppressed by 15% by cultivar 64, whereas 13% of its height was reduced by cultivar 20. Cultivar 15 reduced biomass of yellow nutsedge by 40%. The percentage of chlorophyll of large crabgrass was reduced by 22% with cultivar 5, whereas the height and biomass were reduced by 35 and 44% with cultivars 38 and 63, respectively. Factoring all parameters evaluated, cultivars 38, 33, and 7 were most suppressive against the problematic weed species in tomato.

Pyrethroid resistance is widespread in malaria vectors. However, differential mortality in discriminating dose assays to different pyrethroids is often observed in wild populations. When this occurs, it is unclear if this differential mortality should be interpreted as an indication of differential levels of susceptibility within the pyrethroid class, and if so, if countries should consider selecting one specific pyrethroid for programmatic use over another. A review of evidence from molecular studies, resistance testing with laboratory colonies and wild populations, and mosquito behavioural assays was conducted to answer these questions. Evidence suggests that in areas where pyrethroid resistance exists, different results in insecticide susceptibility assays with specific pyrethroids currently in common use (deltamethrin, permethrin, α-cypermethrin and λ-cyhalothrin) are not necessarily indicative of an operationally relevant difference in potential performance. Consequently, it is not advisable to use rotation between these pyrethroids as an insecticide resistance management strategy. Less commonly used pyrethroids (bifenthrin and etofenprox) may have sufficiently different modes of action, though further work would be needed to examine how this may apply to insecticide resistance management.

Nutrient depletion in Tanzanian sisal production has led to yield decreases over time. We use nutrient mass balances embedded within a life cycle assessment to quantify the extent of nutrient depletion for different production systems, then used circular economy principles to identify potential cosubstrates from within the Tanzanian economy to anaerobically digest with sisal wastes. The biogas produced is then used to generate bioelectricity and the digestate residual can be used as a fertilizer to address the nutrient depletion. If no current beneficial use of the cosubstrate was assumed, then beef manure and marine fish processing waste were the best cosubstrates. If agricultural wastes were assumed to have a current beneficial use as fertilizer, then marine fish processing waste and human urine were the best cosubstrates. The largest reduction in environmental impacts resulted from bioelectricity replacing electricity from fossil fuels in the national electricity grid and improved onsite waste management practices. There is significant potential to revitalize Tanzanian sisal production by applying circular economy principles to sisal waste management and bioenergy production.

Whereas a vast literature exists on satellite-based mapping of rice paddy fields in Asia, where most of the global production takes place, little has been produced so far that focuses on the European context. Detection and mapping methods that work well in the Asian context will not offer the same performances in Europe, where different seasonal cycles, environmental contexts, and rice varieties make distinctive features dissimilar to the Asian case. In this context, water management is a key clue; watering practices are distinctive for rice with respect to other crops, and within rice there exist diverse cultivation practices including organic and non-organic approaches. In this paper, we focus on satellite-observed water management to identify rice paddy fields cultivated with a traditional agricultural approach. Building on established research results, and guided by the output of experiments on real-world cases, a new method for analysing time series of Sentinel-1 data has been developed, which can identify traditional rice fields with a high degree of reliability. This work is a part of a broader initiative to build space-based tools for collecting additional pieces of evidence to support food chain traceability; the whole system will consider various parameters, whose analysis procedures are still at their early stages of development.

The rapidly expanding corona pandemic in 2020 brought the world to virtual economic stagna-tion. While the impact on the environment from suspended air traffic, idle industry and economic lockdown has been considerable, so have the economic and social consequences of the crisis. To make matters worse, the resulting state of stagnation is neither economically nor socially sustaina-ble. Nevertheless, we need to ask ourselves what we can learn from the situation in order to ex-plore the benefits of globalization, intercept similar crisis situations more effectively in the future and move towards more sustainable development on an ecological, economic and social level. This paper identifies the areas of expanded externality management needed to further improve environmental quality, digitalization, network expansion and basic income. These central issues need to be addressed both during and after the crisis in order to deal with problems of inequality and climate change mitigation for current and future generations. Concrete concepts will be put forward and discussed in the paper.

The evolution towards Industry 4.0 is driving the need for innovative solutions in the area of network management, considering the complex, dynamic and heterogeneous nature of ICT supply chains. To this end, Intent-Based networking (IBN) which is already proven to evolve how network management is driven today, can be implemented as a solution to facilitate the management of large ICT supply chains. In this paper, we first present a comparison of the main architectural components of typical IBN systems and, then, we study the key engineering requirements when integrating IBN with ICT supply chain network systems while considering AI methods. We also propose a general architecture design that enables intent translation of ICT supply chain specifications into lower level policies, to finally show an example of how the access control is performed in a modelled ICT supply chain system.

The risk of inhalation exposure to elevated concentrations of hydrogen sulfide (H₂S) and ammonia (NH₃) during the agitation of stored swine manure is high. Once or twice a year, farmers agitate manure before pump-out and application to fields. Agitation of the swine manure causes the short-term releases of highly toxic levels of H₂S and NH₃. In our previous pilot-scale studies, the biochar powder had shown significant mitigation of H₂S and NH₃ emissions when surficially applied to manure immediately before agitation. However, fine biochar powder application poses hazards by itself and may not be practical to apply on a farm scale, especially when livestock and workers are present. We hypothesized that applying pelletized biochar to manure surface is just as effective as applying powder to protect farmers and animals from excessive exposure to H₂S and NH₃. This work reports on the lab-scale proof-of-the-concept trials with biochar pellets on the lab-scale. The objective was to compare the biochar pellets and biochar powder on their effectiveness of mitigation on H₂S and NH₃ gases during 3-hour long swine manure agitation. Three scenarios were compared in (n=3) trials (i) control, (ii) 12.5 mm thick surficial application to manure surface of biochar powder, and (iii) an equivalent (by mass) dose of pelletized biochar applied to manure surface. The biochar powder was bound with 35% (wt) water into ~5 × 10 mm (dia × length) pellets. Biochar powder was significantly (p<0.05) more effective than the biochar pellets. Still, pellets reduced total H₂S and NH₃ emissions by ~72% and ~68%, respectively (p=0.001), compared with ~99% by powder (p=0.001). The maximum H₂S & NH₃ concentrations were reduced from 48.1±4.8 ppm & 1,810±850 ppm to 20.8±2.95 ppm & 775±182 ppm by pellets, and to 22.1±16.9 ppm & 40.3±57 ppm by powder, respectively. These reductions are equivalent to reducing the maximum concentrations of H₂S and NH₃ during the 3-h manure agitation by 57% and 57% (pellets) and 54% and 98% (powder), respectively. Treated manure properties hinted at improved nitrogen retention, yet not significant due to high variability. We recommend scaling-up and trials on the farm-scales using biochar pellets to assess the feasibility of application to large manure surfaces and techno-economic evaluation.

The notion of hierarchy is widely used in many academic disciplines but is also rather ambiguous, because there are many ways to define it. In this review paper, I explore which notions of hierarchy are being used in the field of management and organization studies. Four distinct types of hierarchy are identified: a ladder of formal decision-making authority, a ladder of achieved status, a self-organized ladder of responsibility, and an ideology-based ladder. A social mechanism-based perspective serves to define and distinguish these four types. Subsequently, the typology is further developed by comparing the four hierarchy types in terms of their tacit/explicitness, (in)transitivity, and behavior- versus cognition-centeredness. This review paper contributes to the literature by dissecting the general metaphor of hierarchy into four different constructs and their social mechanisms, which serves to create a typology of the various ways in which hierarchy is being used in the domain of organization and management. This typology can inform future research drawing on any type of hierarchy, also in other domains.

Research focused on understanding wider systemic factors driving behavioral change is limited with a dominant focus on the role of individual farmer and psychosocial factors for farming practice change, including reducing fertilizer application in agriculture. Adopting a wider systems perspective, the current study examines change and the role that supporting services have on fertilizer application rate change. A total of 238 sugarcane growers completed surveys reporting on changes in fertilizer application along with factors that may explain behavior change. Logistic regressions and negative binomial count-data regressions were used to examine whether farmers had changed fertilizer application rates and if they had, how long ago they made the change, and to explore the impact of individual and system factors in influencing change. Approximately one in three sugarcane growers surveyed (37%) had changed the method they used to calculate fertilizer application rates for the cane land they owned/managed at some point. Logistic regression results indicated growers were less likely to change the basis for their fertilizer calculation if they regarded maintaining good relationships with other local growers as being extremely important, they had another source of off-farm income, and if they had not attended a government-funded fertilizer management workshop in the five years preceding the survey. Similar drivers promoted early adoption of fertilizer practice change; namely, regarding family traditions and heritage as being unimportant, having sole decision-making authority on farming activities and having attended up to 5 workshops in the five years prior to completing the survey. Results demonstrated the influence of government-funded services to support practice change.

Background: Although rarely indicated, antibiotics are commonly used for acute diarrhoea in China. We conducted a randomized, double blind exploratory clinical trial of loperamide, berberine and turmeric for treatment of acute diarrhoea. Methods: Adults with acute uncomplicated diarrhoea were randomized to 4 groups: (A) loperamide; (B) loperamide and berberine; (C) loperamide and turmeric; (D) loperamide, berberine and turmeric. All participants were given rescue ciprofloxacin for use after 48 hours if symptoms worsened or were unimproved. Primary endpoints were feasibility and ciprofloxacin use during the 2 week follow-up period. Semi-structured interviews were conducted following recruitment. Results: Only 21.5% (278/1295) of patients screened were deemed eligible, and 49% (136/278) of these consented and entered into the final analysis. Most participants had mild symptoms, because most patients with moderate or severe symptoms wanted to be given antibiotics. Follow-up was good (94% at 2 weeks). Only two participants used rescue antibiotics compared to 65% of acute diarrhoea patients in the hospital during the recruitment period. The median symptom duration was: 14 hours in group B (IQR 10-22), 16 hours in group D (IQR 10-22), 18 hours in group A (IQR 10-33), 20 hours in group C (IQR 16-54). Re-consultation rates were low. There were no serious treatment-related adverse events. Most interviewed participants said the treatment was effective. Conclusion: Although recruitment was challenging because of widespread expectations for antibiotics, patients with mild diarrhoea accepted to try an alternative. This therapy requires further evaluation in a fully powered, randomised controlled trial among a broader sample.

Working capital management requires a careful attention by the corporate managers because it plays an important role in corporate stability. Social belongingness of managers induced them to learn from their society, colleagues and from overall industrial movement. They also learn from their peers which have more strategical efficiency. In line with these arguments, the objective of current study is to explores the peer influence on corporate working capital management practices. To making analysis, ten-years data (2009-2018) of non-financial publicly listed firms at PSX were collected and the cash conversion cycle (CCC) uses as a proxy variable of working capital management (WCM). To estimate the regression, an econometric technique named the Generalized Method of Moments (GMM) was used. The empirical findings suggest the significant impact of peer WCM on corporate WCM. It also suggests the significant impact of other variables that determine the WCM. This study recommends social learning policy to corporate managers. They can learn from their peers to manage the working capital. Most previous studies discuss the peer influence on investment decisions, corporate cash holding and financing policy, etc., but no study explores such a relationship specifically in the Pakistani non-financial sector data set.

Biochar application to the soil can improve soil quality and nutrient leaching loss. Recent studies have reported that surficial application of biochar to stored swine manure can reduce emissions of odorous compounds and reduce the volatilization loss of ammonia. Our working hypothesis was that the biochar-treated manure application to the soil would decrease nutrient leaching from manure and increase plant-available nutrients. The study objectives were to evaluate the impact of biochar-treated swine manure on soil total C, N, and other major and minor nutrients. Three biochars (i) neutral pH red-oak (RO), (ii) highly alkaline autothermal corn (Zea mays) stover (HAP), and (iii) mild acidic Fe-treated autothermal corn stover (HAPE) were incubated with swine manure for a month. The biochar-manure mixture was applied in triplicate to soil columns with application rate determined by the P₂O₅-P content in manure or manure-biochar mixtures after the incubation. The ammonium (NH₄⁺), nitrate (NO₃^-), and reactive P concentrations in soil column leachates were recorded for eight leaching events. Soil properties and plant-available nutrients were compared between treatments and control manure & soil. Manure-(HAP&HAPE) biochar treatments significantly increased soil organic matter (OM) and increased soil total C, N, and improved soil bulk density. Concentrations of KCl-extractable NH₄⁺ and NO₃^- significantly increased in HAPE column leachates during this 4-week study and in the soil after the experiment. A significant reduction in soil Mehlich3 Cu was also observed for the manure-HAPE mixture compared with the control. Overall, the manure-biochar incubation enabled biochar to sorb nutrients from manure, and the subsequent manure-biochar mixture application to soil improved soil quality and plant nutrient availability in comparison to conventional manure application to soil. This proof-of-the-concept study suggests that biochars could be used to solve both environmental and agronomic challenges and further improve the sustainability of animal and crop production agriculture.

In recent years, Lassa fever has been announced as an infectious disease in the world, a few imported cases have been accounted for in various pieces of the world and there are developing worries of the possibilities of Lassa fever Virus as an organic weapon. Regardless of its assaulting impact, no substantial arrangement has been created to reduce the hazard of the ailment, about a large portion of 10 years after identifying it. A Review based on the documents from the literature search on PubMed, Scopus, Goggle Scholar and Science direct. Out of these, the final 16 articles that met the criteria were selected. Relevant information on epidemiology, the burden of management and control were obtained. Timely and effective containment of the Lassa fever disease in Lassa village four decades ago could have minimized the devastating effect and threats posed by this illness in the West African sub-region and indeed the entire globe. That was a hard lesson calling for much more proactive measures towards the eradication of the illness at primary, secondary, and tertiary levels of health care. Hence, the paper is aimed at appraising the threats associated with Lassa fever disease; its demands on curtailing the menace of the epidemic, and recommendations on important focal points.

For traffic management under sudden disaster in high-density areas, the first and foremost step is to prevent traffic congestion in the disaster-affected area by traffic flow control, as to provide enough and flexible traffic capacity for emergency evacuation and emergency rescue. Catastrophe border identification is the foundation and the key to traffic congestion prediction under sudden disaster. This paper uses a mathematical model to study the regional traffic flow in the high-density area under sudden fire disaster based on the Cusp Catastrophe Theory (CCT). The catastrophe border is identified by fitting the CCT-based regional traffic flow model to explore the stable traffic flow changing to the instable state, as to provide a theoretical basis for traffic flow manage and control in disaster-affected areas, and to prevent the traffic flow being caught into disorder and congestion. Based on VISSIM simulator data by building simulation scenarios with and without sudden fire disaster in a Sudoku traffic network, the catastrophe border is identified as 439pcu/lane/h, 529pcu/lane/h, 377pcu/lane/h at 5s, 10s, 15s data collection interval respectively. The corresponding relative precision, which compares to the method of Capacity Assessment Approach (CAA), is 89.1%, 92.7% and 76.5% respectively. It means that 10s data collection interval would be the suitable data collection interval in catastrophe border identification and regional traffic flow control in high-density area under sudden fire disaster.

Today project management in every field of life is prerequisite for the success of project by increasing quality reduces cost and schedule. But selecting tools and techniques to achieve our objectives and implement our plan fully is very difficult task because choice creates complexity. So, we discuss AHP to make decision simple. Ranking critical success factor, cloud computing services, risk prioritization, selection of right ETL software and many other systems AHP plays its important role. For the improvement of today’s complex systems it is very important to prioritize and select projects to remove the root cause of the problem. To attain the right selection of construction equipment for carrying out schedule tasks with high efficiency, production and financial capability is the main purpose of procurement of construction equipment process. Certain conflicts can occur due to the construction of UML models in a collaborative way. AHP is used to remove these conflicts and for establishing and evaluating modelers judgments. Nowadays it is very important and critical decision to choose the best option from multiple alternatives for a successful career after passing 12th standard and also it affects our future. “AHP and TOPSIS” methods are used for this purpose. In this paper, an “AHP and Fuzzy AHP” based hierarchical trust model has been used to rate the service providers and their various plans for infrastructure as a service.

The key goal of the current study was to determine suitable areas of water pumping for drinking and agricultural harvest in Tabriz aquifer, locateed in East Azerbaijan province, northwest Iran. In the study area, groundwater is the key foundation of water for drinking and farming requirements. Groundwater compatibility study was conducted by analysing Electrical conductivity (EC), Total dissolved solids (TDS), Chloride (Cl), Calcium (Ca), Magnesium (Mg), Sodium (Na), Potassium (K), Sulfate (SO₄), Total hardness (TH), Bicarbonate (HCO₃), pH, carbonate (CO₃) and Sodium Adsorption Ratio (SAR) obtained from 39 wells in the period of 2003 to 2014. For this purpose, the Water Quality Index (WQI) and irrigation water quality (IWQ) index is respectively utilized. The WQI index zoning exposed that the groundwater of the study area for drinking purposes is categorized as excellent, good and poor water. Most drinking water harvested for urban and rural areas are in the class of "excellent water". IWQ index average for the study area was in the range of 25.9 to 34.55. The results revealed that about 37 percent (296 km²) of groundwater has high compatibility, and 63 percent of the study area (495 km²) has average compatibility for agricultural purposes. The trend of IWQ and WQI indexes demonstrates that the groundwater is getting worse over the time.

This paper presents findings of a study on continuous feed-in management and continuous synthetic inertia contribution with wind turbines. A realistic case study, based on real measurements, is outlined. A wind turbine feeds into a weak feeder, such that its power has to be adapted to the permissible loading of this feeder. At the same time the wind turbine is to provide inertia to the grid by applying the previously published variable inertia constant controller. It is discussed that optimal grid utilisation and simultaneous inertia contribution are mandatory for the frequency control in power systems that are heavily penetrated with renewable energies. The study shows that continuous feed-in management can be combined well with continuous inertia provision. There are hardly any negative consequences for the wind turbine. The benefits for the grid are convincing, both in terms of increased system utilisation and in terms of provided inertia. It is concluded that wind turbines can enhance angular stability in a power system to a larger extent than conventional power plants.

Electricity demand forecasting has been a real challenge for power system scheduling in the different levels of the energy sectors. Various computational intelligence techniques and methodologies have been employed in the electricity market for load forecasting; although, scant evidence is available about the feasibility of each of these methods considering the type of data and other potential factors. This work introduces several scientific, technical rationale behind intelligent forecasting methods, based on the work of previous researchers in the field of energy. The fundamental benefits and main drawbacks of the aforementioned methods are discussed in order to depict the efficiency of each approach in various situations. In the end, a proposed hybrid strategy is represented.

Social customer relationship management (SCRM) is a new philosophy influencing the relationship between customer and organization, where the customer gets opportunity to control relationship through social media. The paper aims on (a) identification of current level of SCRM and also on (b) influence of basic organizational characteristics on SCRM level. The data were gathered through the questionnaire distributed in 362 organization headquartered in the Czech Republic. The questionnaire comprised 54 questions focusing on the significance of marketing and CRM practices, establishing a relationship with the customer, online communities, the use of social media in marketing, and acquiring and managing information. The majority of questions were scalable and used typical five-level Likert scale. Results showed that larger firms more often set up their own online communities and manage them strategically, moreover they are able to manage information better. Contrariwise, small sized organizations use social networks as a way to establish communication with the customer more than large sized entities. Use of social media for marketing purposes is significantly higher in organizations oriented on consumer markets than on business markets.

In this paper, we discuss the most significant application opportunities and outline the challenges in performing a real-time and energy-efficient management of the distributed resources available at mobile devices and Internet-to-Data Center. We also present an energy-efficient adaptive scheduler for Vehicular Fog Computing (VFC) that operates at the edge of a vehicular network, connected to the served Vehicular Clients (VCs) through an Infrastructure-to-Vehicular (I2V) over multiple Foglets (Fls). The scheduler optimizes the energy by leveraging the heterogeneity of Fls, where the Fl provider shapes the system workload by maximizing the task admission rate over data transfer and computation. The presented scheduling algorithm demonstrates that the resulting adaptive scheduler allows scalable and distributed implementation.

With the rapid development of satellite remote sensing technology, the volume of image datasets in many application areas is growing exponentially and the demand for Land-Cover and Land-Use change remote sensing data is growing rapidly. It is thus becoming hard to efficiently and intelligently retrieve the change information that users need from massive image databases. In this paper, content-based image retrieval is successfully applied to change detection and a content-based remote sensing image change information retrieval model is introduced. First, the construction of a new model framework for change information retrieval in a remote sensing database is described. Then, as the target content cannot be expressed by one kind of feature alone, a multiple-feature integrated retrieval model is proposed. Thirdly, an experimental prototype system that was set up to demonstrate the validity and practicability of the model is described. The proposed model is a new method of acquiring change detection information from remote sensing imagery and so can reduce the need for image pre-processing, deal with problems related toseasonal changes as well as other problems encountered in the field of change detection. Meanwhile, the new model has important implications for improving remote sensing image management and autonomous information retrieval.

Smart grid software interconnects multiple Engineering disciplines (power systems, communication, software and hardware technology, instrumentation, big data, etc.). The software architecture is an evolving concept in smart grid systems in which systematic architecture development is a challenging process. The architecture has to realize the complex legacy power grid systems and cope up with current Information and Communication Technologies (ICT). The distributed generation in smart grid environment expects the software architecture to be distributed and to enable local control. Smart grid architecture should also be modular, flexible and adaptable to technology upgrades. In this paper, the authors have made a comprehensive review on architecture for smart grids. An in depth analysis of layered and agent based architectures is presented and compared under various domains.

Background: Acute ischemic stroke treatment has been thoroughly studied to identify strategies to reduce treatment times. However, many centers still do not meet the benchmark time metrics. Additionally, smaller centers often face longer treatment times, yet studies focus primarily on larger, more advanced centers. Objectives: The aim of this study is to analyze existing literature to understand the strategies implemented in primary and comprehensive stroke centers to reduce their treatment times, and categorize the studies based on methods used to improve their processes Results: Three main categories of improvements were identified in the literature: 1) standardization of processes, 2) resource management, and 3) data collection. Both primary and comprehensive stroke centers were able to reduce treatment times through standardization of processes. However, challenges such as variations in resources between hospitals and difficulties in integrating data collection software into workflow were highlighted. Additionally, many strategies to optimize resource management and data collection were conducted in comprehensive stroke centers, which can benefit primary stroke centers. Conclusions: Many existing strategies to improve treatment times are viable for both primary and comprehensive stroke centers. However, while data collection is recognized as crucial for process improvement, challenges persist in integrating data collection methods into clinical workflow. Proposed solutions include the development of easy-to-use software tailored to clinician needs.

Rising obesity and associated multi-systemic complications amplify the health burden. Euphorbia kansui (EK) extract is clinically recognized for managing obesity. In human study, 240 obese individuals were categorized into two cohorts: those receiving solely herbal medicine (HM group), and those administered EK concomitantly with herbal medicine (EK group). An in vivo examination using C57BL/6-Lepob/Lepob mice elucidated mechanisms involving macrophages and gut microbiota, with associated metabolic advantages. The clinical study revealed a significant 7.22% body weight reduction during 91.55 average treatment days, and examined 16.71% weight loss at 300 days after treatment. In the whole subjects, 60.4%, 21.3% and 6.3% achieved weight reductions exceeding 5%, 10% and 15%, respectively. Impressively, the EK group exhibited superior weight loss compared to the HM group (EK: -7.73% vs. HM: -6.27%, p=0.012). The anti-obesity effect was positively associated with EK therapy frequency and herbal medicine duration. In vivo, EK significantly improved insulin sensitivity and mitigated infiltration of adipose tissue macrophages (ATMs) by modulating the CD11c+ and CD206+ subtypes. EK also correlated with increased Bacteroidetes and Firmicutes populations and reduced Proteobacteria and Verrucomicrobia. Consequently, EK is an effective adjunctive anti-obesity therapy offering metabolic benefits by modulating ATMs and gut microbiota profiles.