Orthogonal Frequency Division Multiplexing (OFDM) while being an efficient scheme for high data rate wireless communications has drawbacks such as higher Peak-to-Average Power Ratio (PAPR). To reduce PAPR, use of multiple signal representation technique such as Partial Transmit Sequence (PTS) is one of the favored techniques. However, the use of conventional PTS technique need excessive number of complex calculations in order to search for all permissible combinations of phase sequences causing steep increase in complexity in terms of complex computations. Paper aims to reduce the cumbersome process of phase selection by making use of the similarity of the phase vectors. The phase vectors are obtained sequentially and thus minimize the number of changes from one phase vector to another. Theoretical analysis shows that computational complexity is significantly reduced with the help of this proposed novel technique. We have also demonstrated that PAPR values are similar i.e. PAPR reduction capability remains similar but at reduced complexity.

The aim of this study was to evaluate the challenges basic school tutors face when integrating Information and Communication Technology (ICT) into their instructing and learning activities and to recommend possible strategies for addressing those challenges. This study employed an interpretive paradigm and a qualitative method approach to analyze the challenges basic school teachers face when integrating ICT into teaching in an emerging country, particularly Ghana. The participants of this study were chosen using purposive and snowball sampling techniques. A total of twenty (20) respondents were chosen for this study. The study found that teachers, despite their challenges, had a strong desire to integrate ICT into their instruction and learning activities. These challenges are the limited number of ICT tools and the absence of fully-subscribed software package that runs on them, the lack of electrical outlets in some classrooms, poor internet connectivity and power fluctuation. These teachers also had to deal with challenges like Trojan horses and spam despite the slow internet connectivity. The study suggested that basic school management should procure modern ICT tools and fully-subscribed software package to expand the school's ICT infrastructure giving teachers the choice to choose the ICT tools they will integrate into their teaching and learning activities for the successful integration of ICT into instruction and learning activities. Again, school management should ensure teachers are given basic training regarding ICT and its incorporation into tuition and learning activities to acquire the necessary competencies, understanding, and attitudes that will enhance teaching and learning activities.

Air pollution is a leading cause of death in the United States, and is associated with adverse health outcomes, including increased vulnerability to coronavirus disease 2019 (COVID-19). The AirBeam2 was used to measure particulate matter with a diameter of 2.5 micrometers or smaller (PM2.5), to investigate differences between indoor and ambient levels at seven private homes in New York during and after the COVID-19 lockdown. Measurements taken in 2020 winter, spring and fall and in fall 2022 showed that 90% of the time, indoor PM2.5 levels exceeded outdoor levels both during and after the COVID-19 lockdown, p = 0.03, and exceeded safety levels. Higher indoor PM2.5 levels attributed to little or no ventilation from cooking and smoke in the kitchen and basements, were significantly greater in fall than in winter. Higher ambient PM2.5 levels were attributed to vehicular traffic at a street-facing sampling site. PM2.5 sources identified in this study may help in devising control strategies to improve indoor air quality (IAQ), and consequently alleviate respiratory health effects. These findings may be used as a basis for in-house modifications including natural ventilation and use of air purifiers to reduce exposures, mitigate future risks, and prevent potential harm to vulnerable residents.

The efficiency of performance in various sports has the development of certain specific skills at its core. In ice hockey, both the technical aspects (techniques, stance) and the cognitive ones (keeping attention on the puck, game strategy, etc.) are highly important. This study is aimed at the identification of specific features that determine the performance efficiency of professional hockey players. We used virtual reality (VR) to study the differences between professional ice hockey players and novices in terms of motor responses to the puck’s presentation on different levels of difficulty. The study involved 22 participants, 13 of them being professional ice hockey players (M_age=20±2.9; mean age of training experience М=14.18±3.8) and 9 being not experienced participants (M_age=20±1.4). The study showed that the stick response time of professional hockey players is significantly higher (0.98 ms vs 1.5 ms, p≤0.05) in more difficult situations close to a real game. Moreover, professionals proved to have more stable movement patterns of the knee and hip joints. They also make fewer head movements as a response to stimuli during all runs (0.66 vs 1.25, p≤0.05). Therefore, the results indicate specific spatial-temporal, technical and tactical, and energetic determinants, that ensure higher performance efficiency in hockey players

The investment in digital e-Health services is a priority direction in the development of global health care systems. While people are increasingly using the Web for health information, it is not entirely clear what is the physicians’ attitude towards digital transformation, and the acceptance of new technologies in healthcare. The aim of this cross-sectional survey study was to investigate physicians’ self-digital skills, and their opinions on obtaining online health knowledge by patients, as well as the recognition of physicians’ attitudes towards e-Health solutions. Principal Component Analysis (PCA) was performed to emerge the variables from self-designed questionnaire, and cross-sectional analysis comparing descriptive statistics and correlations for dependent variables using the one-way ANOVA (F-test). 307 physicians participated in the study, reported using the internet mainly several times a day (66.8%). Most participants (70.4%) were familiar with new technologies and rate their e-Health literacy high, although 84.0% reported the need for additional training in this field, and reported a need to introduce a larger number of subjects shaping digital skills (75.9%) in medical studies 53.4% of physicians perceived Internet-sourced information as sometimes reliable, and in general assessed the effects of using it by their patients negatively (41.7%). Digital skills increased significantly with frequency of internet use (F = 13.167; p = 0.0001), and decreased with physicians’ age, and the need for training. Those who claimed that patients often experienced health benefits from online health showed higher digital skills (-1.06). Physicians most often recommended their patients to obtain laboratory test results online (32.2%), and to arrange medical appointments via the Internet (27.0%). Along with the deterioration of physicians’ digital skills, the recommendation of e-Health solutions decreased (r = 0.413), and lower the assessment of e-Health solutions for the patient (r = 0.449). Physicians perceive digitization as a sign of the times, and frequently use its tools in daily practice. The evaluation of Dr. Google’s phenomenon and online health is directly related to their own e-Health literacy skills, but there is still a need for practical training to deal with digital revolution.

Digital health research is an emerging discipline that requires easy-to-understand theoretical frameworks and implementation models for digital health providers in health and social care settings. The COVID-19 pandemic has heightened demand for digital health discipline-specific instruction on ‘how to’ manage evidence-based digital health transformation. Access to the use of these models guarantees that digital health providers can investigate phenomena using safe and suitable approaches and methods to conduct research and identify answers to challenges and problems that arise in health and social care settings. The COMPASS theory is designed to aid transformation of health and social care environments. A navigational rose of primary quadrants is divided by four main compass points, with person-centred care being central to the philosophy. Two axes produce Cartesian planes that intersect to form a box plot, which can be used to discover human and physical resource weightings to augment digital health research design and implementation. A third continuum highlights stakeholders' capabilities, critical for any multidisciplinary study. The COMPASS mnemonic guides end-users through the process of design, development, implementation, evaluation, and communication of digital health transformations. The theory's foundations are presented and explained in context of the 'new normal' of health and social care delivery.

The need for new technologies into healthcare services has been stressed. However, little is known about the effectiveness of digital interventions integrated in psychosomatic rehabilitation processes. Data from 724 patients from psychosomatic rehabilitation clinics were analyzed for effectiveness of digital trainings examined by a change in symptoms related to depression, anxiety, stress and loneliness from pre- to post-rehabilitation. Rehabilitation satisfaction was examined in association with reaching rehabilitation goals and satisfaction with communication. Mixed repeated measures analysis of covariances, analysis of covariances, and hierarchical stepwise regression analyses were performed. Results indicated a superior effectiveness for the intervention group receiving all offered digital treatments in addition to the regular face-to-face rehabilitation program with regard to symptoms of depression, F(2,674)=3.93, p<.05, ηp2=.01), and anxiety, F(2,678)=3.68, p<.05, ηp2=.01), post-rehabilitation with large effect sizes for both depression (d=1.28) and anxiety (d=1.08). In addition, rehabilitation satisfaction was positively associated with reaching rehabilitation goals and perceived communication with healthcare workers. Digital interventions appeared effective in supporting mental health of psychosomatic rehabilitation patients post-rehabilitation. This finding supports the inclusion of multidisciplinary and interdisciplinary digital and face-to-face treatment programs and call for more implementations of new technologies in a context of complexity to improve health and healthcare service.

For most professionals to be successful in the current job market, they need some entrepreneurial skills (ES). This study aimed to describe and systematize these skills, considering the current globalization and digital transformation phenomena. The documental analysis and the critical reflection on the collected data allowed us to identify the socio-economic and socio-cultural reasons for the relevance of this problem. Consequently, to elaborate a frame of reference that is intended to be adequate to the needs of the professionals of the current global and digital era. The results pointed to a tripartite ES model - to be open to novelty, to create solutions to emerging problems, and to communicate effectively - which integrates the following skills: creativity and innovation, the spirit of initiative, self-efficacy and resilience, strategic planning, and evaluation, resolution of problems and decision-making, transformational leadership, clear and visual communication, teamwork and networking, and digital communication. In the continuation of this study, an ES scale will be created and validated according to this model, which will make it possible to measure the degree of development of these competencies.

Nanocomposites of TiO₂ Degussa P25 nanoparticles/activated carbon (TiO₂/AC ) were prepared at various mass ratios of (4:1), (3:2), (2:3), and (1:4) by a facile process. The effects of TiO₂/AC mass ratios on the structural, morphological, and photocatalytic properties were systematically studied in comparison with bare TiO₂ and bare AC. TiO₂ nanoparticles exhibited dominant anatase and minor rutile phases, and a crystallite size of approximately 21 nm; while AC had XRD peaks of graphite and carbon, and a crystallite size of 49 nm. The composites exhibited tight decoration of TiO₂ nanoparticles on micron-/submicron AC particles, and uniform TiO₂/AC composites were obtained as evidenced by the uniform distribution of Ti, O, and C in an EDS mapping. Moreover, Raman spectra show the typical vibration modes of anatase TiO₂ (e.g., E_1g⁽¹⁾, B_1g⁽¹⁾, E_g⁽³⁾) and carbon materials with D and G bands. The TiO₂/AC with (4:1), (3:2), and (2:3) possessed higher reaction rate constants (k) in photocatalytic degradation of methylene blue (MB) than that of either TiO₂ or AC. Among the investigated materials, TiO₂/AC = 4:1 achieved the highest photocatalytic activity with a high k of 55.2×10^-3 min^-1 and an MB removal efficiency of 96.6% after 30 min treatment under UV-Vis irradiation (120 mW/cm²). The enhanced photocatalytic activity for TiO₂/AC is due to the synergistic effect of the high adsorption capability of AC and the high photocatalytic activity of TiO₂. Furthermore, TiO₂/AC promotes the separation of photoexcited electron/hole (e^-/h⁺) pairs to reduce their recombination rate and thus enhance photocatalytic activity. The optimal TiO₂/AC composite in this study can be used for treating industrial or household wastewater with organic pollutants.

Coal fly ash (CFA) generated from coal-fired power plants (C-FPPs) is continuing to be an environmental health concern due to its potential to contaminate groundwater, surface water, air, and soil, leading to the degradation of land. This study investigated the effectiveness of Helichrysum splendidum Less. for phytoremediation of CFA-polluted sites by conducting pot trials experiments in 14 weeks. Plants of the same age were transplanted into CFA collected from Hendrina Power station to assess their potential in assimilating metallic pollutants (As, Cd, Co, Cu, Mn, Ni, Pb, and Zn) into their tissues and untreated plants were used as controls. Inductively coupled plasma-mass spectrometry was used to quantify the amount of trace elements in samples and the translocation factor (TF) and bioconcentration factor (BCF) were determined to evaluate the phytoremediation potential of Helichrysum splendidum. The results revealed that higher concentrations of As, Ni and Zn were accumulated in the aerial parts as indicated by the TF values greater than 1. In contrast, higher amounts of Cu, As and Zn were found in the roots for CFA grown plants, as demonstrated by their BCF values 1.22, 1.19 and 1.03, respectively. Although CFA medium had restricted growth of some plants as compared to the controls, the results showed an interesting removal efficiency ranging between 18.0 to 56.7% with highest reported for Cu and Zn. Gas exchange analysis revealed that photosynthetic parameters were almost similar in the CFA and control soil pots. The study can confirm that Helichrysum splendidum has phytoextraction and phytostabilization potentials and can be effectively employed for restoration of CFA dams.

This study explores the elements that influence consumer vegetarian diet choices in parts of South Korean provinces. The study examines these explanatory variables: ethical-animal-welfare, health, environment, social issues , mood-emotion, and religious-beliefs with vegetarianism serving as the dependent variable. The Likert scale data from 264 respondents were analyzed using logistic regression analysis. Results show that health, ethical-animal-welfare ideals as well as environmental concerns emerge as significant variables influencing the decision to embrace a vegetarian diet. This shows that consumers (international students) in Korea are becoming more aware of and concerned about health, ethical and sustainable dietary choices. Secondly, health plays a crucial role in the vegetarian diet selection, indicating that health-conscious people are more inclined to choose a vegetarian lifestyle. Religious belief and mood have various degrees of influence on the vegetarian diet decision. The findings of this study have consequences for consumer behavior, marketing managers, and decision-makers. Businesses in the food industry, in particular, can gain from catering to the needs and tastes of consumers that prioritize ethical-animal welfare ideals, as well as those that value health and environmental sustainability. Creating and advertising vegetarian and vegan choices in local restaurants can effectively attract and serve this specific target demographic.

According to the fact that the low convergence level on the complete elliptic integral of the first kind for the modulus which having values approach to one. In this paper we propose novelty of the complete elliptic integral consists of the new infinite series. We apply the scheme of iteration by substituting the common modulus with own modulus function into the new infinite series. We obtained so many new exact formulas of the complete elliptic integral derived from this method correspond to the number of iteration order. On the other hand, it has been also obtained a lot of new modulus functions rather than common used previously. The calculation results show that the number of significant figures of the new infinite series of the complete elliptic integral of the first kind is increased more and more. It means more fastly convergent would be obtained comparison values with the previous infinite series.

This paper presents the design and implementation of a multichannel bio-impedance spectroscopy system on field programmable gate arrays (FPGA). The proposed system is capable of acquiring multiple signals from multiple bio-impedance sensors, process the data on the FPGA and store the final data in the on-board Memory. The system employs the Digital Automatic Balance Bridge (DABB) method to acquire data from biosensors. The DABB measures initial data of a known impedance to extrapolate the value of the impedance for the device under test. This method offers a simpler design because the balancing of the circuit is done digitally in the FPGA rather than using an external circuit. Calculations of the impedance values for the device under test were done in the processor. The final data is sent to an onboard Flash Memory to be stored for later access. The control unit handles the interfacing and the scheduling between these different modules (Processor, Flash Memory) as well as interfacing to multiple Balance Bridge and multiple biosensors. The system has been simulated successfully and has comparable performance to other FPGA based solutions. The system has a robust design that is capable of handling and interfacing input from multiple biosensors. Data processing and storage is also performed with minimal resources on the FPGA.

This paper presents a comparative study of heat transfer performance of lattice structured heat sinks. 20 different unit cells were chosen and heat sinks were modelled in nTop with constant unit cell size. Al 6061 alloy was chosen for analysis due to its good thermal conductivity, low weight, low cost, and high strength. Steady state thermal analysis was performed using ANSYS with constant input parameters for all samples. Heat flux and temperature distribution within the heat sinks were analysed. The study aims to provide a comprehensive understanding of the thermal performance of lattice heat sink designs.

We show that the entropy or information flow of a gravitational system constrains the dependence of gravitational force on radial distance r which for very large r is equivalent to gravity in two dimensions. This explains the "origin" of dark matter and provides a natural solution to the problem of flat rotation curves of galaxies at very large distances and a larger deflection angle for a gravitational lens.

The polysaccharide-based chiral stationary phase (CSP) columns for high-performance liquid chromatography (HPLC) were applied in the separation of liquid crystalline racemic mixtures obtained based on (R,S)-2-octanol and were found to be highly effective in recognizing isomers of minor structural differences. The mobile phase (MP), which consists of acetonitrile (ACN)/water (H2O) at different volume ratios, was used. All measurements were made at room temperature. The order of the elution was also determined. The chromatographic parameters such as resolution - (Rs), selectivity - (α), and the number of theoretical plates, i.e., column efficiency - (N), were determined. The polysaccharide-based CSP columns have unique advantages in separation technology, and this study has shown the potential usefulness of the CSP columns in separating liquid crystalline racemic mixtures belonging to the same homologous series.

The work contains a detailed analysis of the electromagnetic field originating from a point source placed above the layered structure.The surface impedance of the multilayer dielectric structure was determined. Based on the boundary conditions, a method for determining the surface impedance of a layered structure with a perfectly conductive screen and or a magnetic screen is presented. The resonance conditions and the conditions for the excitation of surface waves are derived. The integral expression defining the generalized impedance was analyzed with a view to adapting it to numerical implementation. This allowed the development of a computer program based on which calculations were made of the effect of excitation of waves on multilayer dielectric substrates.

In descriptive statistics, U -statistics arise naturally in producing minimum-variance unbiased estimators. In 1984, Serfling considered the distribution formed by evaluating the kernel of the U -statistics and proposed generalized L-statistics which includes Hodges-Lehamnn estimator and Bickel-Lehmann spread as special cases. However, the structures of the kernel distributions remain unclear. In 1954, Hodges and Lehmann demonstrated that if X and Y are independently sampled from the same unimodal distribution, X − Y will exhibit symmetrical unimodality with its peak centered at zero. Building upon this foundational work, the current study delves into the structure of the kernel distribution. It is shown that the kth central moment kernel distributions (k > 2) derived from a unimodal distribution exhibit location invariance and is also nearly unimodal with the mode and median close to zero. This article provides an approach to study the general structure of kernel distributions.

Descriptive statistics for parametric models are currently highly sensative to departures, gross errors, and/or random errors. Here, leveraging the structures of parametric distributions and their central moment kernel distributions, a class of estimators, consistent simultanously for both a semiparametric distribution and a distinct parametric distribution, is proposed. These efficient estimators are robust to both gross errors and departures from parametric assumptions, making them ideal for estimating the mean and central moments of common unimodal distributions. This article also illuminates the understanding of the common nature of probability distributions and the measures of them.

Electrification of society, increasing renewable energy sources and mobility charging lead to new loading patterns for power transformers. Dynamic load conditions induce enhanced mechanical stress on the transformers’ windings, potentially causing degradation of the solid insulation over time and compromising the transformer's short-circuit withstand capability. Thermal expansion of the windings, caused by losses in the copper conductors, occurring as the transformer is load-ed, increases the stress. Conversely, magnetic losses in the core and tie plate expansion contribute to a reduction in stress. This paper presents the effect of step changes in core losses and copper losses by on-line measurements of the clamping pressure, to better understand the mechanical stresses acting upon the solid insulation cellulose materials.

: The agriculture sector is one of the backbones of many countries’ economies and its processes have been changing in order to enable technological adoption to increase productivity, quality, and sustainable development. In this research, we present a theoretical reflection through a scientific mapping of the adoption of precision techniques and breakthrough technologies in agriculture, the so-called Precision Agriculture (PA) and Agriculture 4.0 (A4.0). To do this, we used 4,694 documents from the Web of Science database to perform a Bibliometric Performance and Network Analysis (BPNA) of the literature with the support of the PICOC protocol and the SciMAT software. Our findings present 22 strategic themes related to Digital Agriculture (DA) such as Internet of Things (IoT) and Climate-smart Agriculture (CSA) among others, and the thematic network structures of the motor themes and the thematic evolution structure of the field of the study over time. In addition, our results discuss the main challenges and opportunities of DA. Our findings have the potential to provide insights for practitioners and researchers in decision-making and pave the way for future works.

Most of the pore-scale imaging and simulations of non-Newtonian fluid are based on the simplifying geometry of network modeling and overlook the fluid rheology and heat transfer. In the present paper, we developed a non-isothermal and non-Newtonian numerical model of the flow properties at pore-scale by direct simulation of the 3D micro-CT images using a Finite Volume Method (FVM). The numerical model is based on the resolution of the momentum and energy conservation equations. Owing to an adaptive meshing technique and appropriate boundary conditions, rock permeability and mobility are accurately computed. A temperature and concentration-dependent power-law viscosity model in line with the experimental measurement of the fluid rheology is adopted. The model is first applied at isothermal condition to 2 benchmark samples, namely Fontainebleau sandstone and Grosmont carbonate, and is found to be in good agreement with the Lattice Boltzmann method (LBM). Finally, at non-isothermal conditions, an effective mobility is introduced that enables to perform a numerical sensitivity study to fluid rheology, heat transfer, and operating conditions. While the mobility seems to evolve linearly with polymer concentration, the effect of the temperature seems negligible by comparison. However, a sharp contrast is found between carbonate and sandstone under the effect of a constant temperature gradient. Besides concerning the flow index and consistency factor, a good master curve is derived when normalizing the mobility for both the carbonate and the sandstone.

By using 0.35-um CMOS process, this work achieves a design of analogous band-gap reference voltage circuit with low temperature coefficient. The proposed circuit operates at 3V and generates a reference current of 44 uA. The HSPICE simulation results show the temperature coefficient of this circuit is 23 ppm/℃ at range of -10 ℃ to 100 ℃, and the line regulation (the ratio of output current variation to supply voltage variation) is estimated as 1.95 uA/V from supply voltage variation of 3 V to 5 V. The experimental chip is fabricated and measured. The circuit provides adjustable capability for output voltage among temperature variation of -10 - 100 ℃. The chip area is 534 × 695 um^2. In this new design, the operational amplifier is not necessary. The chip design effort can be great reduced.

Generating electricity from coal combustion is highly associated with ongoing pollution problems that negatively impact the environment. Coal fly ash (CFA) is a predominant waste by-product of coal combustion which is disposed of in exposed ash dams constructed in the vicinity of power stations. Its disposal requires a large piece of land and therefore more land is converted to unproductive disposal sites, degrading the ecosystem. This waste material is classified as a hazardous substance in South Africa due to unacceptable levels of inorganic and persistent organic pollutants and its potential for dust creation. CFA is recycled and sold to the building and construction sectors, but the rate of its utilization is far less than the production rate resulting to high volumes that is stockpiled in disposal sites. More than 500 million tons CFA is produced yearly and over 200 million tons yearly remain unused globally and more CFA will continue to be produced due to high consumer energy demands, especially in countries with heavy reliance on coal for power generation. In this context, the paper discusses production of CFA, pollution problems due to its disposal, examines existing gaps within the scope of ash dam restoration processes and presents opportunities offered by phytoremediation (a low-cost and environmentally friendly technology that utilizes plants to restore the degraded environments). Ecological restoration through the use of socio-economically valuable plants (aromatic plants, legumes and grasses) has potential in addressing societal challenges and consequently impacting positively the livelihood of communities.

Satellite-based rainfall estimation products provide a vital alternative source of rainfall data in areas where conventional precipitation measurement is not readily available. In order to facilitate the use of these products there is the need to evaluate their accuracies. This study evaluated the accuracy of three satellite rainfall products; TMPA 3B42RT, TMPA 3B42 and CMORPH in the Pra basin (23,330 km²) of Ghana. The evaluation was through the point-to-pixel method by comparing 0.25°x 0.25° satellite grids to gauged rainfall based on gauge locations and analyzed statistically using correlation coefficient (r), bias and percent bias (pBias) as the performance verification methods. Seven (7) gauge stations with no missing data for the period of 2003-2008 was used in the evaluation. The analysis was based on daily, monthly, annual and seasonal timescales. Our results showed a good correlation between the TMPA products and the gauged data on all timescales considered. The CMORPH on the other hand showed huge overestimation at all gauge locations. The TMPA 3B42 was seen to be the best amongst the three products. The overall rainfall in the basin was well depicted by the TMPA 3B42 and 3B42RT. Although there wasn’t a perfect match between the 3B42RT and 3B42 products and the gauged rainfall, these products can be used to supplement gauged rainfall measurements in the basin and in estimation of rainfall in ungauged basins with similar characteristics.

The prognostic abilities of artificial intelligence and neuroscience in forensics and the criminal justice system stand as a reformatory paradigm for understanding any criminal conduct. While the use of artificial intelligence has been labeled transformational data analytical capabilities, neural predictive approaches also enable an intricate understanding of culpability and criminal propensities. The literature on the complex nature of neuroprediction and artificial intelligence, its ethical deliberations and its usability in curving recidivism are analyzed. This theoretical review elucidates the complex interplay, nuptial relationships and convergence of these relationships in the quest for justice. The consequences of not protecting individual rights in the criminal justice system are surveyed using grounded theory. The degree of acceptability and dependability of AI-generated evidence in legal proceedings are also reviewed. All these topics are yet to be contemplated under one roof to offer an argumentative view. The author expects to prompt readers and new commers to embrace more sociolegal and technological research before incorporating such research in the Indian Judiciary. The review focuses on the question of whether to blame such technology inclusion wholly or rather to prioritize the acquisition of bias-free pretrained datasets and processing models.

E-petitioning is a useful object of study for observing the potential emergence of a new relationship to politics and new forms of political participation. Access to a dataset of hundreds of thousands of users of an electronic petitioning platform, provides the opportunity to overcome a certain number of limitations that are associated with traditional methods of studying political participation, since it allows us to focus on the reality of the signatories’ behaviour rather than on their declarations. We follow the traces left by the petitioners on this site to better understand the process of dissemination of an online petition, and its linked with offline activities. Our examination of the three most signed petitions in the ‘environment’ category, combining an analysis of their petitioning dynamics and an analysis of the comments attached to them, allows us to show: firstly, that there is an interwoven relationship between the local anchoring of the mobilisation and the processes of dissemination by which petitions extend from local signatories to signatories who are geographically more distant; and secondly, that it is not accurate to imagine that just anyone can sign any petition, since petitioning dynamics proceed from one person to the next, whether these dynamics start from a pre-existing local anchorage on the ground, or act through a platform effect which is dependent on the attractiveness of the petition in question.

Objectives: The study aimed to develop a deep learning-based edge AI model deployed on electrocardiograph (ECG) devices for real-time detection of atrial fibrillation (AF)-risk during sinus rhythm (SR) using standard 10-second 12-lead electrocardiograms (ECGs). Methods: A novel approach was used to convert standard 12-lead ECGs into binary images for model input, and a lightweight convolutional neural network (CNN)-based model was trained using data collected by the Japan Agency for Medical and Research Development (AMED) between 2019 and 2022. Patients over 40 years old with digital, SR ECGs were retrospectively enrolled and divided into AF and non-AF groups. Data labeling was supervised by cardiologists. The dataset was randomly allocated into training, validation, and internal testing datasets. External testing was conducted on data collected from other hospitals.　Results: The best-trained model achieved an AUC of 0.82 and 0.80, sensitivity of 79.5% and 72.3%, specificity of 77.8% and 77.7%, precision of 78.2% and 76.4%, and overall accuracy of 78.6% and 75.0% in the internal and external testing datasets, respectively. The deployed model and app package utilized 2.5MB and 40MB of the available ROM and RAM capacity on the edge ECG device, correspondingly. Processing time for AF-risk detection was approximately 2 seconds.　Conclusion: The model maintains comparable performance and improves its suitability for deployment on resource-constrained ECG devices, thereby expanding its potential impact to a wide range of healthcare settings. Its successful deployment enables real-time AF-risk detection during SR, allowing for timely intervention to prevent AF-related serious consequences like stroke and premature death.

This study investigated how the type and homogenisation parameters of the feed mixture affect the efficiency of the encapsulation process and the microcapsule properties of phenol-rich grape pomace extract (GPE) during the spray drying process with goat whey protein (GW) as wall material. GPE was obtained by solid-liquid extraction of grapes with 50% ethanol. Effects of ultrasonic homogenisation parameters (UB): temperature: 30-50 °C; time: 5-30 min; stabilisation time after homogenisation: 15-45 min, and homogenisation parameters on a magnetic stirrer (MS): temperature (25-50 °C), time (10-60 min) and homogenisation speed (600-1200 rpm) were tested using response surface methodology (RSM) and Box-Behnken design. After selecting the optimal homogenisation conditions, the spray drying process parameters were optimised in the same way, namely: inlet air temperature (160-190 °C), GW fraction (0.5-3.5) and feed flow (6-10 mL/ min). The results showed that GW has a high potential as a wall material in the spray drying process, especially for the purpose of protecting polyphenolic compounds from GPE.

Understanding HCPs COVID-19 vaccine concerns can provide critical insights to optimize success of the vaccine rollout program as they are a trusted source of health information to patients and the general population. We sought to understand reasons for health care providers’ COVID-19 vaccine hesitancy in Kenyatta National teaching and referral Hospital. From April to July 2021, we interviewed 60 HCPs purposively sampled from the Infectious Disease Unit (IDU) (n=20) and other departments (n=40). We analyzed data using inductive and deductive approaches to understand reasons for COVID-19 vaccine hesitancy. The HCPs had a median age of 37 years, (Interquartile range: [IQR 20.0-58.0]), 57% were female, 30% nurses among other cadres. Most HCPs cited low confidence in the vaccine such as mistrust in healthcare system and government, vaccine safety and efficacy concerns. Constraints such as uncertainty about the second vaccine dose availability, and misinformation caused hesitancy. Further, few were reluctant receiving the vaccine because of perceived herd immunity from a recent COVID-19 infection, and the need for more information before deciding. The study highlights the need to address any misinformation about vaccines safety and efficacy, and ensure accurate information is easily accessible to HCPs which can translate to higher vaccine uptake.

Background: Demographic aging is a reality in developed countries, which poses a social challenge of great responsibility. Thus, numerous studies have been developed in an attempt to understand which factors best predict healthy aging. The aim of this study was to investigate and systematize literature on intervention programs that simultaneously include cognitive stimulation and physical activity, understand the importance of the use of new technology in these programs, and understand their impact on cognitive function in older adults, giving indications about their contribution to healthy aging. Methods: A narrative approach was used for extraction and synthesis of the data. Relevant studies were identified from electronic databases such as PubMed, Scopus, Web of Science and Academic Search Complete. Results: Thirty-two articles, involving 2815 participants, were identified. All selected studies were randomized controlled studies. The studies were published between 2011 and 2020. All studies included a combination of cognitive and physical interventions. Many of the studies used technology to administer the cognitive stimulation program. Conclusions: Most of the analyzed studies use new technologies in physical and cognitive interventions, demonstrating that this new form of intervention exerts lasting and stable benefits in cognition.

This study aims to investigate the influence of various economic, environmental, and social factors on sustainable development, with a specific focus on the impact of green technology and climate change adaptation. A panel dataset comprising 38 OECD member countries from 1990 to 2020 is employed, and a series of dynamic panel data models are estimated using the system generalized method of moments (GMM) approach. Numerous covariates, such as globalization, socio-economic conditions, economic and political values, climate and technological progress, and environmental determinants, are examined. The empirical findings highlight the significant role played by macroeconomic, institutional, social, and government policy-related factors in sustainable development. More importantly, our results provide novel and robust evidence that the diffusion of green technology and climate change adaptation positively affect green growth. The study's empirical outcomes are demonstrated to be robust to misspecification errors and statistically significant at traditional significance levels. These findings carry substantial policy implications for the development and implementation of strategies that promote climate change adaptation and green innovation. Consequently, policymakers should prioritize the integration of green technology and adaptive measures in their sustainable development agendas to foster a greener, more resilient future.

Industrial green technology innovation has become an important content in achieving high-quality economic growth and comprehensively practicing the new development concept in the new era. This paper measures the efficiency of industrial green technology innovation and regional differences based on Chinese provincial panel data from 2005 to 2018, using a combination of the super-efficient SBM model for considering undesirable outputs and the Dagum Gini coefficient method, and discusses and analyses the factors influencing of the industrial green technology innovation efficiency by constructing a spatial econometric model. The results show that: firstly, the industrial green technology innovation efficiency in China shows a relatively stable development trend, going through three stages: " stationary period", " recession period " and "growth period ". However, the efficiency gap between different regions is obvious, specifically in the eastern > central > western regions of China, and the industrial green technology efficiency innovation in the central and western regions is lower than the national average. Secondly, regional differences in the efficiency of industrial green technology innovation in China are evident but tend to narrow overall, with the main reason for the overall difference being regional differences. In terms of intra-regional variation, variation within the eastern region is relatively stable, variation within the central region is relatively low and shows an inverted 'U' shaped trend, and variation within the western region is high and shows a fluctuating downward trend. Thirdly, the firm size, government support, openness to the outside world, environmental regulations and education levels contribute to the efficiency of industrial green technology innovation. In addition, the industrial structure hinders the efficiency of industrial green technology innovation, and each influencing factor has different degrees of spatial spillover effects.

With the onset of the COVID19 pandemic, information technology has played a critical role in healthcare. A broad spectrum of information technology tools and applications played an essential role to create awareness of the COVID19 vaccination drive and its health benefits. We use the COVID-19 Global Beliefs, Behaviors, and Norms Survey for analysis of prevalence and factors associated with vaccination drives among men and women aged 20-80 years in 60 countries worldwide. Our analysis of the global survey offers a unique perspective about the role of information technology associated with vaccination drives involving social norms and human behavior among 437,236 respondents. The international survey was organized using a pre-registered randomized experiment demonstrating the role of technology in reaching out to people based in diverse communities and evaluating their beliefs, behavior, and social norms. The study shows that vaccine acceptance can vary due to descriptive norms. Our analysis shows 65.06% of people all over the globe are willing to get vaccinated and a large proportion of the population thinks that the COVID19 pandemic is a viable threat to the community and preventive measures need to be taken including vaccination drives.

Litchi orchards of 15 year age in Pantnagar were subjected to different fruit bagging treatments in study entitled “Impact of pre-harvest fruit bagging technology on growth and quality traits in litchi cv. Rose Scented under Indian prospective”. The combination includes white and pink polypropylene bags practiced on three dates i.e. 15, 25 and 30 days after fruit set and a control. Hence, study comprised of 7 treatment combination in total. The data of year 2017 and 2018 as well as pooled data revealed that T1 i.e. white polypropylene bags + bagging 15 days after fruit set was found to be promising in attributes such as fruit cracking (%) and Sun burn (%). T3 White Polypropylene bags + bagging 30 days after fruit set was found best for fruit Weight (g) and Acidity (%), T4 Pink Polypropylene bags + bagging 15 days after fruit set was found promising for TSS (0Brix), T6-Polypropylene Pink + 10th May (30 days after fruit set) was observed to be best for most of the desired attributes viz. Fruit breadth (mm), Yield (Kg/tree), Acidity (%), Anthocyanin (mg/100g), Fruit colour (visual), borer infestation (%) and B:C Ratio. However, fruits without bagging i.e. control were found to have inferior appearance and have maximum fruit cracking (%) and sun burn (%). Thus the bagging of litchi fruits with white polypropylene bags 15 days after fruit set resulted in lesser cracking and sunburn incidence. For other attributes, polypropylene pink bagged 30 days after fruit set was found promising. In Litchi under Indian condition, the novel technique of fruit bagging significantly enhance the fruit appearance and quality.

Relying on the United Arab Emirates (UAE) extract from the cross-national data sample on the environmental affection and cognition of adolescent students, and seemingly unrelated bivariate weighted ordered probit regression modeling, this study adopts a national perspective to investigate the determinants of adolescent students' awareness and expectations about nuclear power technology and nuclear waste in the UAE. Identification of model parameters is achieved through maximum simulated likelihood estimation. The findings show that each level increase in UAE youth's interest in ecosystem services and sustainability raises their awareness of nuclear electrical power and nuclear waste by 13.5%, while reducing by 2.4% their level of optimism towards the technology. Furthermore, we find significant heterogeneity in youth awareness and expectations about nuclear power technology across the seven Emirates. Accounting for all other factors (including interest in ecosystem services), UAE youth awareness about nuclear electrical power technology appears to not significantly influence their expectations about the evolution of this technology for the next 20 years. Given that the UAE first nuclear power plant ``Barakah'' is scheduled to start operations end of 2019 beginning 2020, and the typical long life-span of nuclear wastes, our results provide important insights for developing sustainable nuclear energy policies and establishing a long-term nuclear energy program in the UAE.

In music, the role of the interpreter is to play her/his part manipulating the performance parameters in order to offer a sonic rendition of the piece capable of conveying specific expressive intentions. Since the 1980s there has been a growing interest in computational expressive music performance (EMP). This research field has two fundamental objectives: the understanding of the phenomenon of human musical interpretation and the automatic generation of expressive performances. Rule based, statistical, machine and deep learning approaches have been proposed, most of them devoted to the classical repertoire, in particular to piano pieces. On the contrary, we present an introduction to the role of expressive performance within popular music and to the contemporary ecology of pop music production, based on the use of Digital Audio Workstations (DAWs) and virtual instruments. After an analysis of the tools related to expressiveness commonly available to modern producers we propose a detailed survey of research into the computational EMP field, highlighting the potential and limits of what is present in literature with respect to the context of popular music, which by its nature cannot be completely superimposed on the classical one. In the concluding discussion we suggest possible lines of future research in the field of computational expressiveness applied to pop music.

The paper analyzes the actions that improve innovativeness in production enterprises in the Silesian province. Innovation is one of the elements that allows to achieve a competitive advantage. It turns out justified to research various factors that are important in improving innovativeness. The research includes selected production enterprises in the Silesian province, adopting the descriptive statistics measures and statistic tests: random sample test, chi-square independence test and the non-parametric Kruskal-Wallis test based on a survey questionnaire. As part of the most important factors determining the possibilities of innovation by manufacturing companies were detected contacts with other enterprises, R&D centers and counseling institutions, competitive position of the company and creating appropriate incentive systems.

53% of adults in the US acknowledge racial bias as a significant issue, 23% of Asian adults experience cultural and ethnic bias, and more than 60% conceal their cultural heritage after racial abuse. AI models like ChatGPT and Google Bard, trained on historically biased data, inadvertently amplify racial and ethnic bias and stereotypes. This paper addresses the issue of racial bias in AI models using scientific, evidence-based analysis and auditing processes to identify biased responses from AI models and develop a mitigation tool. The methodology involves creating a comprehensive database of racially biased questions, terms, and phrases from thousands of legal cases, Wikipedia, and surveys, and then testing them on AI Models and analyzing the responses through sentiment analysis and human evaluation, and eventually creation of an 'AI-BiasAudit,' tool having a racial-ethnic database for social science researchers and AI developers to identify and prevent racial bias in AI models.

As a major coal country, China faces the issue of significant gas emissions during the coal mining process. This study aims to improve the utilization efficiency of mine gas, reduce greenhouse gas emissions, and promote the low-carbon and green transformation of the coal industry. A 10kW gas regenerative thermal oxidation (RTO) experimental system was constructed. The effects of initial methane concentration, low-temperature flue gas proportion, and operating load on combustion temperature, methane oxidation rate, high-temperature flue gas energy, and system thermal efficiency were studied. The results show that when the combustion temperature is below 600°C, the CH4 combustion reaction cannot proceed effectively, and the system temperature continuously decreases and cannot be maintained stable. The experiment determines the stable operating methane concentration range of RTO. In this experimental system, the lower limit of the initial methane concentration is 0.28%, corresponding to an 86% methane oxidation rate. As the initial methane concentration decreases, the combustion temperature also decreases, and the methane oxidation rate follows suit. The higher the low-temperature flue gas proportion, the higher the combustion temperature, and the system thermal efficiency and output heat decrease with the increase of the low-temperature flue gas proportion. This experiment explores multiple factors affecting regenerative thermal oxidation, providing an basis for ensuring the safe and stable operation of the system and optimization. Improving the thermal insulation and heat exchange performance of the storage body can expand the lower limit of the initial methane concentration, thereby increasing the stability and thermal efficiency of the system.

The study conducts a comparative analysis of solar radiation estimation methods, assessing the efficacy of the Heliosat-2 algorithm against ground measurements across seven distinct countries: Netherlands, Spain, Japan, Namibia, South Africa, Saudi Arabia, and India. To achieve this, it utilizes two distinct satellite data sources—Himawari-8 for Japan and Metosat Second Generation-MSG for the rest of the countries—spanning the years Jan 2022 to April 2024. A robust methodology for determining albedo parameters specific to Heliosat-2 was developed. During cloudy days, the estimates provided by Heliosat-2 generally exceeded the ground measurements in all the countries. Conversely, on clear days, there was a tendency for underestimation, as indicated by the median value of the mean bias (MB) across most of the countries. The Heliosat-2 model slightly underestimates daily radiation values, with a median MB ranging from −27.5 to +10.2 W.m⁻². Notably, the median root mean squared error (RMSE) on clear days is significantly lower, with values ranging from 24.8 to 108.7 W.m⁻², compared to cloudy days where RMSE values lie between 75.3 and 180.2 W.m⁻². In terms of R² values, both satellites show a strong correlation between the estimated and actual values, with a median value consistently above 0.86 on a monthly scale and over 92% of daily data points falling within ±2 standard deviation.

This study investigates the impact of real-time emotional feedback on the quality of teamwork conducted over videoconferencing. We developed a framework that provides real-time feedback through a virtual mirror based on facial and voice emotion recognition. In an experiment with 28 teams (84 participants), teams collaborated over Zoom to set up a virtual Mars station using custom simulation software. Participants were divided into 14 experimental teams which were shown the virtual mirror, and 14 control teams without it. Team performance was measured by the improvement in the Mars simulation output quality. Our analysis using correlation, multilevel regression, and machine learning revealed that fewer interruptions but an increasing number over time correlated with higher performance. Higher vocal arousal and happiness also enhanced performance. We confirmed that female presence in teams boosts performance. SHAP values indicated that high variability in happiness, head movement, and positive facial valence—an “emotional rollercoaster”—positively predicted team performance. The experimental group outperformed the control group, suggesting that virtual mirroring improves virtual teamwork and that interrupting each other more, while speaking less, leads to better results.

Submerged aquatic vegetation, also referred to as submerged macrophytes, provides important habitats and serves as a significant ecological indicator for assessing the condition of water bodies and for gaining insights into the impacts of climate change. In this study, we introduce a novel approach for the extensive monitoring of submerged vegetation, validated against established monitoring techniques. Employing full waveform airborne laser scanning, frequently used for topographic mapping and forestry applications on dry land, we extend its application to the detection of underwater vegetation in Lake Constance. The primary focus of this research lies in the automatic classification of LiDAR (Light Detection And Ranging) point clouds, distinguishing the three vegetation classes (i) Low Vegetation, (ii) High Vegetation, and (iii) Vegetation Canopy based on their height. The results reveal detailed three-dimensional representation of submerged vegetation, enabling the identification of vegetation structures and inference of vegetation types with reference to pre-existing knowledge. While the results within training areas demonstrate high precision and alignment with comparative data, the findings in test areas exhibit comprehensible deficiencies that are likely addressable through corrective measures in the future.

The healthcare sector has undergone a profound transformation, owing to the influential role played by IoMT (Internet of Medical Things) technology. However, there are substantial concerns over these devices' security and privacy-preserving nature. Current literature on IoMT tends to focus on specific security features like data confidentiality or data integrity or data availability or access control and most solutions are simulated and not tested in a real-world live network. This paper proposes a smart secure by design solution that safeguards user’s data during health and wellbeing monitoring of patients locally (home, care-home, and hospital) and remotely. The proposed innovative solution is known as Secure by Design Real Time IoMT Architecture for e-Health Population Monitoring (RTPM) for smart hospitals and any healthcare monitoring management. In this system, keys can also be generated by the patient monitoring system independent to maintain high privacy standard and trust during the monitoring process and to enable the IoMT devices run independently even if the server is compromised and are made safe from external exploits to the client nodes. However, the session keys are controlled by the trusted IoMT server to lighten the IoMT devices overheads and the session keys are securely exchanged between the client system and the monitoring server. The proposed RTPM focuses on addressing the major security requirements for an IoMT system: confidentiality, integrity, availability, conducts authentication, protect from DoS attacks and prevent from non-repudiation attack of patient medical data and the devices in a real time, sensory data communication environment for live e-health monitoring. A secure communication is tested by capturing the live network traffic and the system’s performance analysis of RTPM using different security algorithms with different key sizes of RSA, AES, and SHA shows that resource constraint low powered system can also successfully integrate with high-end state-of-the-art secure parameters and features and have the potential to support real time secure interaction. A stress test is also conducted to ensure that the system can withstand huge key sizes and different data types including multi-media information.

A number of chemical modifications were carried out in order to synthesize new compounds based on the triterpenoid betulonic acid. Triazolation reactions were carried out for the synthesis of new 1,2,3-triazole derivatives based on betulonic acid. Chemical changes were made on the carbonyl group at the C-3 position of the initial molecule and on the carboxyl and hydroxyl groups at the C-28 position. Chromatographic methods were used to separate and purify the formed products. Spectroscopic (NMR-, mass-) methods were used to establish the structure of synthesized compounds. As a result of the chemical transformations carried out, a number of new derivatives of betulonic acid were obtained. All synthesized compounds were tested for antimicrobial and cytotoxic activity. As a result, compounds with pronounced antimicrobial activity were identified.

The textile sector is responsible for a number of environmental impacts. Due to the in-creasing quantities of textiles, their share is rising and a trend reversal from a linear to a circular textile chain is needed. This article presents the background, methodological approach and results of a participatory textile development model. In the commercial B2B sector, three textile prototypes were developed together with users and trialled over several months in three application areas. Textile development took into account the requirements of fibre regeneration in the product design and focused on innova-tive chemical recycling solutions. The three sustainably aligned textiles were subject-ed to spectroscopic and textile-technological tests. Screening life cycle assessments an-alysed their environmental profile and compared it with reference textiles that are used as standard. Overall, it is clear that the three textiles can match conventional ref-erence textiles in terms of quality and have considerable environmental benefits com-pared to the reference textiles. The user survey did identify concerns about a high arti-ficial fibre content, although a general rejection of recycled fibres was not observed. The results show that a transformation is possible, but must start with the fibre com-position; recycling, on the other hand, is of minor importance.

Preventing the rebound of black and odorous water bodies is critical for improving the ecological environment of water bodies. This study investigated the effect and mechanism of in-situ improvement of sediment microenvironment by nitrate in tailwater of wastewater treatment plants combined with aerobic denitrifying bacteria under low-DO regulation (TailN+CFM+LDO). On the 60th day of remediation, the dissolved oxygen and oxidation-reduction potential in the overlying water increased to 5.6 mg/L and 300 mV, respectively, the acid volatile sulfide in the sediment decreased by 70.4%, and the organic matter in the sediment was reduced by 62.7%, in which the HFOM was degraded from 105 g/kg to 56 g/kg, and the potential risk of water reverting to black and odorous conditions significantly decreased. Amplicon sequencing analysis revealed that the relative abundance of electroactive bacteria Thiobacillus and Pseudomonas with denitrification capacity was found to be significantly higher in the TailN+CFM+LDO group than in the other remediation groups. Functional prediction of 16S sequencing results indicated that both the quantity and activity of critical microbial enzymes involved in nitrification and denitrification processes could enhance in the TailN+CFM+LDO group. These results improved our understanding of the improvement of the sediment microenvironment and could thus facilitate its application.

Innovation is an essential key factor in the technology development history. Past research on innovation focused more on the innovation behavior of technology, but seldom described knowledge assets which also influence innovation behavior greatly. The effect of knowledge assets attribute and result on disruptive innovation is therefore regarded as the research topic in this study, where disruptive innovation is divided into outbound and inbound to combine combination-embeddednessandmajor business specificityof knowledge assets as the research model. Manufacturing enterprises in China are proceeded the questionnaire survey, and 173 valid copies are collected. The empirical analysis shows that combination-embeddedness of knowledge assets presents significantly positive effects on major business specificity and outbound innovationof an enterprise but reveals remarkably negative effects on inbound innovation. Enterprises are suggested to constantly accumulate knowledge assets with low major business specificity before disruptive innovation in order to reduce ineffective inbound innovation.

Imperfection sensitivity of large amplitude vibration of curved single-walled carbon nanotubes (SWCNTs) is considered in this study. The SWCNT is modeled as a Timoshenko nano-beam and its curved shape is included as an initial geometric imperfection term in the displacement field. Geometric nonlinearities of von Kármán type and nonlocal elasticity theory of Eringen are employed to derive governing equations of motion of nano-beam. Spatial discretization of governing equations and associated boundary conditions is performed using differential quadrature (DQ) method and the corresponding nonlinear eigenvalue problem is iteratively solved. Effects of value and location of the geometric imperfection, and the nonlocal small-scale parameter on the nonlinear frequency ratio and imperfection sensitivity of a curved SWCNT for various boundary conditions are investigated. The results show that the geometric imperfection plays a significant role in the nonlinear vibration characteristics of curved SWCNTs.

Stroke constitutes a significant public health concern due to its impact on mortality and morbidity. This study investigates the utility of machine learning algorithms in predicting stroke and identifying key risk factors using data from the Suita study, comprising 7,389 participants and 53 variables. Initially, unsupervised K-prototype clustering categorized participants into risk clusters, while five supervised models including Logistic Regression (LR), Random Forest (RF), Support Vector Machine (SVM), eXtreme Gradient Boosting (XGBoost), and Light Gradient Boosted Machine (Light-GBM) were employed to predict stroke outcomes. Stroke incidence disparities among identified risk clusters using the unsupervised K-prototype clustering method are substantial, according to the findings. Supervised learning, particularly RF was a preferable option because of the higher levels of performance metrics. The Shapley Additive Explanations (SHAP) method identified age, systolic blood pressure, hypertension, estimated glomerular filtration rate, metabolic syndrome, and blood glucose level as key predictors of stroke, aligning with findings from the unsupervised clustering approach in high-risk groups. Additionally, previously unidentified risk factors such as elbow joint thickness, fructosamine, hemoglobin, and calcium level demonstrate potential for stroke prediction. In conclusion, machine learning facilitated accurate stroke risk predictions and highlighted potential biomarkers, offering a data-driven framework for risk assessment and biomarker discovery.

Digital machine intelligence has evolved from its inception in the form of computation of numbers to AI, which is centered around performing cognitive tasks that humans can perform, such as predictive reasoning or complex calculations. The state of the art includes tasks that are easily described by a list of formal, mathematical rules or a sequence of event-driven actions such as modeling, simulation, business workflows, interaction with devices, etc., and also tasks that are easy to do “intuitively”, but are hard to describe formally or as a sequence of event-driven actions such as recognizing spoken words or faces. While these tasks are impressive, they fall short in applying common sense reasoning to new situations, filling in information gaps, or understanding and applying unspoken rules or norms. Human intelligence uses both associative memory and event-driven transaction history to make sense of what they are observing fast enough to do something about it while they are still observing it. In addition to this cognitive ability, all bio-logical systems exhibit autopoiesis and self-regulation. In this paper, we demonstrate how machine intelligence can be enhanced to include both associative memory and event-driven transaction history to create a new class of knowledge-based assistants to augment human intelligence. The digital assistants use global knowledge derived from the Large Language Models to bridge the knowledge gap between various participants interacting with each other. We use the general theory of information and schema-based knowledge representation to create the memory and history of various transactions involved in the interactions.

Abstract: The widespread and popular use of TADs for orthodontic anchoring has become a daily routine in clinical orthodontic treatment. However, as there have been many accidents over the past decade, safety action is needed to help reduce these accidents. We have advocated using the surgical guide and developed a procedure that can benefit patients and orthodontists. The first part of this paper is about the rationale for making the surgical guide for various implant placements that were observed. Due to their anatomical structure, some placements may require particular attention, which is focused on and discussed in length. The second part deals with fabricating the surgical guide in the laboratory procedure. The data from the intraoral SLT acquisition was extracted, and with the DICOM data from CBCT and in a 3-Shapes software, the guidance was designed. The detailed and step-by-step laboratory procedure, CAD/CAM, and 3D printers to make the surgical guide for TADs are explained. The procedure is performed in an easy-to-understand manner to make using the surgical guide possible for the daily practice of orthodontics (Pubmed).

There is a growing need for an area-wide knowledge of SOC contents in agricultural soils at field scale for food security, monitoring long-term changes related to soil health and climate change. In Germany, large-scale SOC maps are mostly available with a spatial resolution of 250 m to 1 km2. The nationwide availability of both digital elevation models at various spatial resolutions and multi-temporal satellite imagery enables the derivation of multi-scale terrain attributes and Landsat-based multi-temporal soil reflectance composites (SRC) as explanatory variables. On the example of an Bavarian test of about 8000 km2, the scale-specific dependencies between the representativeness of 220 soil samples and different aggregation levels of the explanatory variables were analyzed for their scale-specific predictive power. The aggregation levels were generated by applying a region-growing segmentation procedure, the SOC content prediction was realized by the Random Forest algorithm. In doing so, established approaches of (geographic) object-based image analysis (GEOBIA) and machine learning were combined. The modeling results revealed scale-specific differences. Compared to terrain attributes, the use of SRC parameters lead to a significant model improvement at large field-related scale levels. The joint use of both terrain attributes and SRC parameters resulted in further model improvements. The best modeling variant is characterized by an accuracy of R2=0.84 and RMSE=1.99.

The quality of digital elevation models (DEMs) is inevitably affected by the limitations of the imaging modes and the generation methods. One effective way to solve this problem is to merge the available datasets through data fusion. In this paper, a fusion-based global DEM dataset (82°S-82°N) is introduced, which we refer to as GSDEM-30. This is a 30-m DEM mainly reconstructed from the unfilled SRTM1, AW3D30, and ASTER GDEM v2 datasets combining the multi-source and multi-scale fusion techniques. A comprehensive evaluation of the GSDEM-30 data, as well as the 30-m ASTER GDEM v2 and AW3D30 DEM, was presented. Global ICESat GLAS data and the local National Elevation Dataset (NED) were used as the reference for the vertical accuracy validation, while GlobeLand30 was introduced for the landscape analysis. Furthermore, we employed the maximum slope approach to detect the potential artefacts in the DEMs. The results show that the GDEM data are seriously affected by noise and artefacts. With the advantage of the multiple datasets and the refined post-processing, the GSDEM-30 are contaminated with fewer anomalies than both ASTER GDEM and AW3D30. The fusion techniques used can also be applied to the reconstruction of other fused DEM datasets.

GCTs are developmental tumors and likely to reflect ontogenetic and teratogenetic determinants. The objective was to identify syndromes with or without congenital anomalies and non-syndromic defects as potential risk factors. Patients with extracranial GCTs (eGCTs) registered in MAKEI 96/MAHO 98 between 1996 and 2017 were used. According to Teilum's holistic concept malignant and benign teratomas were registered. We used a case control study design with Orphanet as a reference group for syndromic defects and the Mainz birth registry (EUROCAT) for congenital anomalies at birth. Co-occurring genetic syndromes and/or congenital anomalies were assessed accordingly. Odds ratios and 95% confidence intervals were calculated and p-values for Fisher’s exact test with Bonferroni correction if needed. A strong association was confirmed for Swyer (OR 338.6, 95% CI 43.7-2623.6) and Currarino syndrome (OR 34.2, 95% CI 13.2-88.6). We additionally found 17 isolated cases of eGCT with a wide range of syndromes, however not significantly associated following Bonferroni correction. All these cases pertained to girls. Regarding non-syndromic defects, no association with eGCTs could be identified. In our study we confirmed a strong association for Swyer and Currarino syndromes with additional congenital anomalies.

(1) Background: The purpose of this study is to evaluate the full arch scan accuracy (precision and trueness) of nine digital intra-oral scanners and four lab scanners. Previous studies have compared the accuracy of some intra-oral scanners, but as this is a field of quickly developing technologies, a more up-to-date study was needed to assess the capabilities of currently available models.; (2) Methods: The present in vitro study compared nine different intraoral scanners (Omnicam 4.6; Omnicam 5.1; Primescan; CS 3600; Trios 3; Trios 4; Runyes; i500 and DL206) as well as four lab light scanners (Einscan SE; 300e; E2 and Ineos X5) to investigate the accuracy of each scanner by examining the overall trueness and precision. Ten aligned and cut scans from each of the intra-oral and lab scanners in the in vitro study were brought into CloudCompare. A comparison was made with the master STL using the CloudCompare 3D analysis best-fit algorithm. The results were recorded along with individual standard deviation and a colorimetric map of the deviation across the surface of the STL mesh; a comparison was made to the master STL, quantified at specific points. ; (3) Results: In the present study, the Primescan had the best overall trueness (17.3 ± 4.9). Followed by (in order of increasing deviation) the Trios 4 (20.8 ± 6.2), i500 (25.2 ± 7.3), CS3600 (26.9 ± 15.9), Trios 3 (27.7 ± 6.8), Runyes (47.2 ± 5.4), Omnicam 5.1 (55.1 ± 9.5), Omnicam 4.6 (57.5 ± 3.2) and Launca DL206 (58.5 ± 22.0). Regarding the lab light scanners, the Ineos X5 had the best overall trueness with (0.0 ± 1.9). Followed by (in order of increasing deviation) the 3Shape E2 (3.6 ± 2.2), Up3D 300E (12.8 ± 2.7), and Einscan SE (14.9 ± 9.5); (4) Conclusions: This study confirms that all current generations of intra-oral digital scanners can capture a reliable, reproducible full arch scan in dentate patients. Out of the intra-oral scanners tested, no scanner produced results significantly similar in trueness to the Ineos X5. However, the Primescan was the only one to be statistically of a similar level of trueness to the 3Shape E2 lab scanner. All scanners in the study had mean trueness of under 60-micron deviation. While this study can compare the scanning accuracy of this sample in a dentate arch, the scanning of a fully edentulous arch is more challenging. The accuracy of these scanners in edentulous cases should be examined in further studies.

This study aimed to investigate the potential of Cord Blood Stem Cell-derived exosome vesicles (CBSC-EVs) in regulating cancer growth and preventing cellular damage. The study aimed to examine the effects of CBSC-EVs on CHL1 cancer cells and healthy fibroblasts. The study results reveal that CBSC-EVs have an anti-cancer/antioxidant effect on CHL1 cancer cells without inducing any toxic effects on healthy lymphocytes. Further analysis of CBSC-EVs revealed the presence of seven miRNAs (noncoding RNA molecules), including three from the Let 7 family, two from the Let 5 family, and two novel miRNAs. The function of the novel miRNAs was the main focus of the study. To assess the efficacy of CBSC-EVs, CHL1 cells (a type of malignant melanoma cell line) and human fibroblasts were grouped into different treatments. One group of those cell lines were treated with CBSC-EVs, and in the second group, the cells were transfected with either miRNA inhibitor Novel 1 (miRNA IN1) plus CBSC-EVs or miRNA inhibitor Novel 2 (miRNA IN2) and CBSC-EVs to knock down those novel miRNAs in the CBSC-EVs. Therefore, by comparing these groups, the function of novel miRNAs is more understandable. In this study, the Comet assay was employed to evaluate cancer cells' DNA damage and CCK8 to measure cell viability. The findings revealed that CBSC-EVs caused an increase in DNA damage in CHL1 cells compared to cells without treatment (p

In the era of mounting water scarcity, particularly in arid regions, the agricultural sector is striving to optimize the water resource management practices. Treated wastewater (TWW) has emerged as a viable alternative to freshwater for irrigation, offering a sustainable solution to water conservation. However, ensuring the safety and quality of TWW is paramount to safeguard for both crop health and environmental integrity. Electrical conductivity (EC), a critical factor in assessing TWW suitability for irrigation, can significantly impact crop yields and soil health since it is directly linked to the concentration of dissolved salts and ions. Therefore, this study delves into the development of advanced predictive models for EC assessment by employing supervised machine learning (ML) techniques like the Support Vector Regression (SVR), Adaptive Network-based Fuzzy Inference System (ANFIS), and Multiple Linear Regression (MLR). The TWW samples collected from Al-Qatif area, Saudi Arabia were assessed in the lab through a sensor-based real-time monitoring system integrated with Internet of Things (IoT) network and a multiprobe device. The key water quality parameters assessed involved, temperature (T), pH, Oxidation Reduction Potential (ORP), Resistivity (RES), Total Dissolved Solids (TDS), Salinity and Turbidity which served as the foundation for these models, given their profound influence on and their anticipated impact on EC levels. Following feature selection, two distinct model combinations were identified for the SVR, ANFIS and MLR models. Furthermore, to evaluate prediction performance, four statistical criteria, including coefficient of determination (R²), correlation coefficient (R), mean square error (MSE), and root mean square error (RMSE), were employed. Overall, the comparative performance results proved that ANFIS-M2 indicated the strongest predictive capability with the R² value of 0.99572 and 0.75145 and the RMSE values of 0.00965 and 0.01134, respectively in both calibration and verification stages.

Functional neurological disorder (FND) is a complex condition that involves a disruption in the brain's ability to properly integrate sensory input and prior expectations, leading to motor dysfunction in functional motor disorders (FMD). This study investigates the role of sensory attenuation and the sense of agency in FMD, focusing on how these mechanisms can be leveraged for therapeutic interventions. Sensory attenuation, the brain's ability to predict and reduce the intensity of self-generated sensory inputs, is impaired in FMD, leading to a reduced sense of agency. This impairment disrupts motor control and contributes to the perception of involuntary movements.We propose using a bipedal reaching virtual reality (VR) task combined with a haptic ankle device to explore and potentially rehabilitate these impairments. In this task, foot positions are represented by VR objects, with initial weighting favoring the unaffected limb. This weighting gradually shifts to the affected limb as its involvement increases under operant conditioning. The task occasionally introduces perturbations to probe motor-related processing and feedback correction, providing a sensitive measure of visuomotor control. Additionally, we incorporate neuroimaging techniques, specifically functional near-infrared spectroscopy (fNIRS) and electroencephalography (EEG), to monitor brain activity and assess the effectiveness of these interventions. This approach aims to enhance understanding of the neural mechanisms underlying FND and develop targeted therapies that improve motor control by leveraging the interplay between sensory attenuation and amplification.Our findings could provide valuable insights into the treatment of FND, emphasizing the importance of feedback modulation and the integration of modern technologies like VR and haptic feedback in therapeutic interventions. This research has the potential to significantly improve the prognosis and quality of life for individuals with FND.

The increasing growth in knowledge about functioning of the nervous system of mammals and humans, as well as the significant neuromorphic technologies development in recent decades, have led to the emergence of a large number of brain-computer interfaces and neuroprosthetics for the regenerative medicine tasks. Neurotechnologies have traditionally been developed for therapeutic purposes to help or replace motor, sensory or cognitive abilities damaged by injury or disease. They also have significant potential for memory enhancement. However, there are still no fully developed neurotechnologies and neural interfaces capable of restoring or expanding cognitive functions, in particular memory, in mammals or humans. In this regard, the search for new technologies in the field of restoration of cognitive functions is an urgent task of modern neurophysiology, neurotechnology and artificial intelligence. Hippocampus is an important brain structure connected to memory and information processing in the brain. The aim of this paper is to propose an approach based on deep neural networks for prediction of hippocampal signals in CA1 region based on received biological input in CA3 region. We compare results of prediction for two widely used deep architectures: reservoir computing (RC) and long short-term memory (LSTM) networks. Proposed study can be viewed as a first step in the complex task of the development of a neurohybrid chip, which allows one to restore memory functions in the damaged rodent hippocampus.

(1) Background: This paper details the development process of two assistive technology products (ATs) implemented in the PAID project, aiming to promote the social, educational, and labor inclusion of people with disabilities across 10 municipalities of Antioquia, Colombia. (2) Methods: Applying Design Thinking (DT) methodology, including stages of empathizing, defining, ideating, prototyping, and testing, alongside a demographic study where specific needs of people with disabilities (PwDs) were identified. (3) Results: As a result, the construction process of two specific cases of assistive technology products (ATs) is detailed, including finite element simulation, mechanical testing, and delivery to end-users. Additionally, workshops for assistive product fabrication conducted in select municipalities of the project are highlighted. (4) Conclusions: the information gathered guided the development of the ATs, focusing on their features on accessibility and ease of replication. The primary objective is to facilitate the participation of PwDs in educational environments, thus promoting inclusion and accessibility. This article describes the results of two of these ATs; however, it is worth noting that this process was performed for 112 ATs delivered through the duration of the project.

In this paper, a low-power Injection-Locked Clock and Data Recovery (ILCDR) using 28nm FDSOI technology is presented. The back-gate auto-biasing of UTBB-FDSOI transistors allows us to create a QRO (Quadrature Ring Oscillator) reducing both size and power consumption. By injecting a digital signal into this circuit, we realize an Injection-Locked Oscillator (ILO) with low jitter. Thanks to the good performance of this oscillator, we propose a low power ILCDR with fast locking time and low jitter for burst-mode applications. The main novelty consists in the implementation of a complementary QRO based on back-gate control using FDSOI technology to realize a simple and efficient ILCDR circuit. With a Pseudo-Random Binary Sequence (PRBS7) at 868Mbps, the recovered clock jitter is 26.7ps (2.3%UIp-p) and the recovered data jitter is 11.9ps (1%UIp-p). With a 0.6V power supply, the power consumption is 318μW. The estimated Chip area is around 6600μm².

Due to its size, wood dust often plays the role of a raw material used as a source of energy. However, it is nevertheless an unavoidable byproduct generated during the milling of wood or wood-based composites. The research presented here is focused on the selected properties of 3-layer plywood, produced with the utilization of dust from the milling of three-layer particleboard as a filler in the bonding mass. Four types of filler were used in the study: commercial rye flour, wood dust naturally occurring in the composition of particles used industrially for particleboard production, wood dust from the first batch of shredded particleboard, and dust from the second round of milled particleboard. In the context of this investigation, the highest modulus of elasticity (MOE) values were observed in reference samples. Conversely, for samples featuring filler material from the initial milling process, there were no substantial differences in filler content. Notably, in samples where the filler was sourced from the secondary milling of particleboard, the modulus of elasticity exhibited an upward trend in conjunction with increasing filler content. A similar trend was observed in samples utilizing the naturally occurring dust. Meanwhile, the modulus of rupture (MOR) decreased with an elevated degree of milling, though it displayed a slight increase as the filler content increased. With regard to shear strength testing, the most favorable outcomes were achieved in samples incorporating filler material from the initial milling of particleboard. The thickness swelling of the plywood reached its peak in variants utilizing filler material from both the initial and secondary milling of particleboards. In contrast, water absorption testing exhibited a more pronounced response in the newly introduced variants, although samples incorporating filler from the initial and secondary milling processes eventually yielded results akin to the reference sample, with the naturally occurring dust displaying higher water absorption values. In terms of density profiles, the highest density values were observed in samples utilizing rye flour as the filler material. A similar density profile was observed in samples with 5 parts of wood flour as filler, although the density of the adhesive was slightly lower in these cases. An increase in the quantity of wooden filler material resulted in a commensurate increase in plywood thickness. The research confirms the possibility of using the aforementioned dust as an alternative to conventional fillers in plywood technology. It also raises the question of how to effectively remove glue residues from wood-based composite dust, which would enhance their absorption properties.

Efficient traffic management at signalized intersections is integral to urban infrastructure development, requiring accurate estimation of delay times to mitigate congestion and enhance overall transportation systems. Traditional methodologies, including empirical observations and microsimulation software, have been prevalent in assessing delay times; however, their limitations have prompted the exploration of novel technologies like LiDAR (Light Detection and Ranging) sensors. This research study investigates and compares the accuracy of delay time estimations obtained from LiDAR sensor technology with those derived from microsimulation in AIMSUN. LiDAR sensors, known for their high-resolution, real-time data collection capabilities, offer a promising avenue for precise measurement of delay times at signalized intersections. Nonetheless, challenges in sensor placement, environmental influences, and data processing complexities suggest the need for further development and validation. In parallel, microsimulation software, exemplified by AIMSUN, provides a virtual platform for scenario testing but relies on assumptions that may not always mirror real-world traffic dynamics accurately. The comparative analysis conducted in this study aims to critically examine the discrepancies and potential complementarity between delay times obtained from LiDAR sensor technology and those derived from microsimulation in AIMSUN. The research involves an in-depth evaluation of real-time, high-resolution data collected by LiDAR sensors, assessing their accuracy in capturing the intricate movements and behavior of vehicles at signalized intersections. Simultaneously, AIMSUN microsimulation delay time models are scrutinized for their ability to accurately replicate these observed delay times. The disparities identified serve as critical insights into the challenges of both methodologies, prompting the discussion on the prospects of integrating LiDAR-derived data and microsimulation calibration processes to enhance the precision and reliability of delay time estimations. Future traffic management strategies can significantly benefit from a more accurate understanding of delay times, and this study endeavors to contribute to the advancement of methodologies in traffic engineering for more effective urban transportation systems.The paper's findings illuminate the potential and limitations of both LiDAR sensor technology and microsimulation in estimating delay times at signalized intersections. The results highlighted that the LiDAR sensors could accurately calculate delay times at a signalized intersection. Furthermore, the calculated delay time differences by LiDAR and AIMSUN at three days with the highest vehicle volumes (counts) are always less than 6.5%.

Genome-based testing in oncology is a rapidly expanding area of health care which is the basis of the emerging area of precision medicine. Efficient and considered adoption of novel genomic medicine testing is hampered in Canada by the fragmented nature of health care oversight as well as by lack of clear and transparent processes to support rapid evaluation, assessment and implementation of genomic tests. This article provides an overview of some key barriers and proposes approaches to addressing these challenges as a potential pathway to developing a national approach to genomic medicine in oncology.

Educators' subject-matter knowledge and their understanding of the many ways in which technology may be used to enhance student learning can both benefit from the usage of pedagogical technology, which is the primary goal of this kind of technology. The goal of this study is to determine the extent to which kids with special needs might benefit academically by adopting various forms of technology into their daily routines. This work makes use of descriptive qualitative research together with the methodology and processes that come with case study research. The emphasis of this study was placed on three institutions that welcome students of all abilities. According to the results of the qualitative research, inclusive schools do not universally possess the resources necessary to successfully incorporate technology into the classroom. The results suggest that this teacher occupies a position that is about equivalent to the center of the acceptable range. This displays the instructor's existing proficiency in the use of technology to enhance the results for their students.

Background: Depressive symptoms often occurred during the adolescence period. This situation affected their psychological well-being, which is an important element for a positive youth development. Thus, there is an urgent need to prevent such mental health problems and promote psychological health outcomes among adolescents. Mobile health has been created as a platform to promote mental health to adolescents to ensure ongoing safety and effectiveness. Despite the positive evidence to support the mobile health, tailored mobile health to promote mental health and prevent psychological symptoms among adolescents in Thailand is lacking.This study aimed to assess the feasibility and acceptability of delivering digital technology intervention prototype called “MU-My-Mind Mobile Application (MU-My-mind App)” among Thai adolescents and evaluate the efficacy of this application in improving psychological health outcomes. Materials and Methods: This quasi-experimental research was conducted in secondary school students in Thailand. A convenience sample was recruited and participants were asked to download the MU-My-Mind App on their smart phone. Health outcomes were also evaluated by self-administered questions and focus group interview at baseline and post-intervention. Feasibility and acceptability were assessed. Quantitative data were analyzed by descriptive statistics and pair t-test. Qualitative data were analyzed by thematic analysis. Results: Thirty students completed the MU-My-Mind application. Quantitative data suggested significant improvements on mindfulness, psychological well-being, depression, anxiety and stress. Qualitative data derived into six themes: a) overall feedback of the program, b) learning to manage stress and challenges, c) elevating relaxation responses and calmness, d) heightened mindfulness and concentration, e) increased awareness and management of emotions, and f) altering perspectives and managing thoughts. Overall, data suggested the acceptability and feasibility of the intervention. Conclusion: The “MU My Mind Mobile Application” prototype was demonstrated feasible and well acceptable among Thai adolescents to promote their psychological health outcome. However, there are some limitation and suggestion emerged during this pilot testing. Future research should be explored in a larger sample size with comparison control group and over a longer duration with a range of diverse samples to ensure the efficacy of this application.

This study aimed to identify the influencing factors that drive the adoption of smart construction technologies by highway construction companies. Using expert interviews and expert scoring, interview data were collected from 25 experts in the field, and the TOSE framework was proposed based on the TOE framework, identifying four dimensions and fourteen influencing factors. The results were analyzed using the Fuzzy-DEMATEL-ISM method, and the findings were then summarized according to the evaluation criteria to determine the validity of the fourteen hypotheses and the extent to which they drive the adoption of intelligent construction technologies by motorway construction companies. The findings of this paper will be of great value to decision-makers and participants in highway construction companies, as well as to other companies in the construction industry, in their decision to adopt smart construction technologies.

There is a national shift in the new Indonesian curriculum to employ differentiated learning approach in addressing diversity of students’ needs and abilities. Teachers’ judgment obviously corresponds to the duty that takes physics teachers to monitor their students at individual level. Within Indonesian physics education research (PER) context, empirical study that has addressed this subject is still lacking. To fill this gap, eight Indonesian physics teachers’ experiences and limitations about their judgment within differentiated learning environment has been investigated through phenomenological study. Physics teachers were voluntarily recruited after they have declared their endorsement and personal consent to participate in the study. Our participants were distributed over several teaching experiences, geographic regions, and ICT experiences. The latter experience might be taken into account since, through this study, we would project upcoming developmental research about engaging recent technological approaches to cope limitations of teachers’ judgment. Online semi-structured interviews (~ 50 min) were conducted by the first author (P.H.S.) to all physics teachers. Other authors contributed in reviewing the interview protocol (E.I. and H) and training the first author’s pilot interview (H.R.). Model of teachers’ thought and action was implemented to uncover physics teachers’ experiences and limitations in making judgment within diverse students. Findings revealed that physics teachers have conceded that they should adapt learning process in order to meet heterogeneous students’ needs. Personal observation has mainly informed teachers to identify students’ differences. After students have been identified, they creatively designed learning transformations to accommodate spectrum of students’ abilities. Nevertheless, we discovered several limitations encountered by teachers particularly in terms of judgments’ equity, accuracy, and their workload. To overcome this, teachers indicated various and supportive attitudes about technology implementation to assist their judgment. Implications for technological development was provided to address obstacles during the teachers’ judgment.

Many Caribbean island nations have historically been heavily dependent on imported fossil fuels for both power and transportation, while at the same time being at an enhanced risk from the impacts of climate change, although their emissions represent a very tiny fraction of the global total responsible for climate change. Small island developing states (SIDS) are among the leaders in advocating for the ambitious 1.5°C Paris Agreement target and the transition to 100% sustainable, renewable energy systems. In this work we present three central results. First, we show through GIS mapping of all Caribbean islands the potential for near-coastal deep-water as a resource for Ocean Thermal Energy Conversion (OTEC) and couple these results with an estimate of the countries for which OTEC would be most advantageous due to a lack of other dispatchable renewable power options. Second, hourly data have been utilized to explicitly show the trade-offs between battery storage needs and dispatchable renewable sources such as OTEC in 100% renewable electricity systems, both in technological and economic terms. Finally, the utility of near-shore, open-cycle OTEC with accompanying desalination is shown to enable a higher penetration of renewable energy and lead to lower system levelized costs than those of a conventional fossil fuel system.

The need for the most accurate and flexible system of revenue collection from internal sources has become a matter of extreme urgency and importance in e-governance. This need underscores the eagerness on the part of the Government to look for a new principle and policy of revenue collection or to become aggressive and innovative in the mode of collecting revenue from existing sources using the present system. The Boards of some Governments in Africa, even up to the moment are facing a lot of setbacks in performing their tasks due to the manual system of revenue collection from the public. This can be improved through an effective collection of revenue using the most accurate and flexible system. Tax is usually collected in the form of specific sales tax, general sales tax, corporate income tax, individual income tax, property tax and inheritance tax. Problems such as high cost of collection, fraud, underpayment, leakage in revenue, poor access to information, poor tracking of defaulters is at the increase. As a result of this, there is need to computerize the revenue collection system. Computerized systems have proven to introduce massive efficiencies and quick collection of revenue from the public. This research work demonstrates how to design and implement an automated system of revenue collection and how to maintain a secured database for collected tax information. This research delves into the study of how machine learning algorithms and Software-defined Networks improve the security of such automated systems.

The whole genome sequencing (WGS) has become a crucial tool to understand genome structure and genetic variation. The MinION sequencing of Oxford Nanopore Technologies (ONT) is an excellent approach for performing WGS and has advantages in comparison with other Next-Generation Sequencing (NGS): It is relatively inexpensive, portable, has simple library preparation, can be monitored in real-time, and has no theoretical limits on read length. Sorghum bicolor (L.) Moench is diploid (2n = 2x = 20) with a genome size of about 730 Mb, and its genome sequence information is released in the Phytozome database. Therefore, sorghum can be be used as a good reference. However, plant species have complex and large genomes compared to animals or microorganisms. As a result, complete genome sequencing is difficult for plant species. MinION sequencing that produces long-reads can be an excellent tool to overcome the weak assembly of short-reads generated from NGS by minimizing the generation of gaps or covering the repetitive sequence that appears on the plant genome. Here, we conducted the genome sequencing for S. bicolor cv. BTx623 using the MinION platform and obtained 895,678 reads and 17.9 gigabytes(Gb) (ca. 25X coverage of reference) from long-read sequence data. Through a de novo assembly using two different tools and mapped assembled contigs against the sorghum reference genome, a total of 6,124 contigs (covering 45.9%) were generated from Canu, and a total of 2,661 contigs (covering 50%) were generated from Minimap and Miniasm with a Racon pipeline. Our results provide a pipeline of long-read sequencing analysis for plant species using the MinION platform and a clue to determine the total sequencing scale for optimal coverage based on various genome sizes.

An innovative wireless sensor network (WSN) based on Ultra-Wide Band (UWB) technology for 3D accurate superficial monitoring of ground deformations, as landslides and subsidence, is proposed. The system has been designed and developed as part of an European Life+ project, called Wi-GIM (Wireless Sensor Network for Ground Instability Monitoring). The details of the architecture, the localization via wireless technology and data processing protocols are described. The flexibility and accuracy achieved by the UWB two-way ranging technique is analysed and compared with the traditional systems, such as robotic total stations (RTSs), Ground-based Interferometric Synthetic Aperture Radar (GB-InSAR), highlighting the pros and cons of the UWB solution to detect the surface movements. An extensive field trial campaign allows the validation of the system and the analysis of its sensitivity to different factors (e.g., sensor nodes inter-visibility, effects of the temperature, etc.). The Wi-GIM system represents a promising solution for landslide monitoring and it can be adopted in conjunction with traditional systems or as an alternative in areas where the available resources are inadequate. The versatility, easy/fast deployment and cost-effectiveness, together with the good accuracy, make the Wi-GIM system a possible solution for municipalities that cannot afford expensive/complex systems to monitor potential landslides in their territory.

Despite ongoing efforts, the relationship between groin strength and injury remains unclear. The challenge of accurately predicting injuries presents an opportunity for researchers to develop pre-vention strategies to reduce the occurrence of such injuries. Consequently, this issue requires further investigation to obtain insights into effective mitigation strategies. In 120 male soccer players the maximum isometric strength of the hip muscle groups was measured, and the strength ratios were calculated. Previous injury and anthropometric data were registered. Injury data were collected following the FIFA/UEFA consensus. The K- Nearest Neighbour (k-NN), was used to predict the incidence of injury, while the significant predictive variables of the k-NN algorithm were fitted into a multivariate logistic regression model (LR) to analyze the likelihood of players sustaining a groin injury. The LR model determined two variables as significant predictors of groin injury. Players were less likely to sustain a groin injury by 76% for each decrease of the Adductors/Abductors isometric strength ratio in the non-dominant limb (OR = 0.238, CI 95%= [(0.098-0.572]). Players with a history of previous injury had a 67% greater risk of sustaining an injury (OR = 0.333, CI 95%= [(0.1068-1.038]). Isometric hip adductor and abductor strength im-balances of the non-dominant lower limb and a history of previous injury were risk factors for groin injury in soccer players.

Circulating cell-free DNA (cfDNA) refers to small fragments of DNA molecules released after programmed cell death and necrosis in several body fluids such as blood, saliva, urine, and cerebrospinal fluid. The discovery of cfDNA has revolutionized the field of non-invasive diagnostics in the oncologic field, in prenatal testing, and in organ transplantation. Despite the potential of cfDNA and the solid results published in recent literature, several challenges remain, represented by low abundance, need for highly sensitive assays and analytical issues. In this review, the main technical advances in cfDNA analysis are presented and discussed, with a comprehensive examination of the current available methodologies applied in each field. Considering the potential advantages of cfDNA, this biomarker is increasing its consensus among clinicians, as it consents to monitor patients’ conditions in an easy and non-invasive way, offering a more personalized care. Nevertheless, cfDNA analysis is still considered a research marker to be further validated, and very few centers are implementing its analysis in the real-life assistance. As technical improvements are enhancing the performances of cfDNA analysis, its application will transversally improve patients’ quality of life.

Behavior analysis is a widely used non-invasive tool in the practical production routine, as the animal acts as a biosensor capable of reflecting its degree of adaptation and discomfort to some environmental challenge. Predominantly, conventional statistics use occurrence data for behavioral evaluation and well-being estimation, disregarding the temporal sequence of events. The Generalized Sequential Pattern (GSP) algorithm is a data mining method that identifies recurrent sequences that exceed a user-specified support threshold, whose potential has not yet been investigated for broiler chickens in enriched environments. Enrichment aims to increase environmental complexity with promising effects on animal welfare, stimulating priority behaviors and potentially reducing the deleterious effects of heat stress. The objective was to validate the application of the GSP algorithm to identify temporal correlations between heat stress and the behavior of broiler chickens in enriched environments through proof of concept. Video image collection was carried out automatically for 48 continuous hours, analyzing a continuous period of seven hours, from 12:00 PM to 6:00 PM, during two consecutive days of tests for chickens housed in enriched and non-enriched environments under comfort and stress temperatures. Chickens at comfort temperature showed high motivation to perform the behaviors of Preening (P), Foraging (F), Lying down (Ld), Eating (E), and Walking (W) whose sequences &lt;{Ld,P}&gt;; &lt;{Ld,F}&gt;; &lt;{P,F,P}&gt;; &lt;{Ld,P,F}&gt; and &lt;{E,W,F}&gt; were the only ones observed in both treatments. All other sequential patterns (comfort and stress) were distinct, suggesting that environmental enrichment alters the behavioral pattern of broiler chickens. Heat stress drastically reduced the sequential patterns found at the 20% threshold level in the tested environments. The behavior of lying laterally "Ll" is a strong indicator of heat stress in broilers and was only frequent in the non-enriched environment, which may suggest that environmental enrichment provides the animal with better opportunities to adapt to stress-inducing challenges, such as heat.

Ovarian cancer is among the most common causes of female mortality. Despite improvements in diagnostic methods, non-specific symptoms and delayed gynecological exams can lead to late-stage ovarian tumor discovery. In this study, the effect of an anti-cancer compound, 3-amino-N-(3-chloro-2-methylphenyl)-5-oxo-5,6,7,8-tetrahydrothieno[2,3-b]quinoline-2-carboxamide (Compound 1) was examined. Cytotoxicity, apoptosis, and metabolomic changes in ovarian cancer cell lines SK-OV-3 and OVCAR-3, as well as glycosphingolipid (GSL) expression, both on cancer stem cells (CSCs), marked as CD49f+ and non-CSCs (CD49f-) were explored. Treatment with Compound 1 reduced the percentage of CSCs compared to non-treated cells (P &lt; 0.001). The expression of eight GSLs on CSCs and non-CSCs was examined using flow cytometry. Both cell lines showed a change in the glycophenotype of the cells, either up or down of its expression, after the treatment. These findings raise the possibility of specifically targeting CSCs in ovarian cancer therapy. Additionally, treatment of Compound 1 resulted in a statistically significant increase in both early and late apoptosis (P&lt;0.001) suggesting a pivotal role in initiating programmed cell death by the apoptotic pathway. The metabolic analysis revealed that the treated cancer cells showed reduced metabolic activity compared to the control group (P &lt; 0.001)

The Internet of Things (IoT) is a promising technology for sensing and monitoring the environment to reduce disaster impact. Energy is one of the major concerns for IoT devices, as sensors used in IoT devices are battery-operated. Thus, it is important to reduce energy consumption, especially during data transmission in disaster-adverse situations. Clustering-based communication helps reduce a node’s energy decay during data transmission and enhances the network’s lifetime. Many hybrid combination algorithms are proposed for clustering and the routing protocol to improve the network lifetime in disaster scenarios. However, the performance of these protocols is widely varied based on the underlying network configuration and the optimisation parameters considered. In this research, we have used the clustering parameters that are most relevant to disaster scenarios, such as the node’s residual energy, distance to sink, and network coverage. Then, we proposed a bio-inspired hybrid (BAO-PSO) algorithm where the Butterfly Optimisation Algorithm (BOA) is used for clustering and Particle Swarm Optimisation (PSO) is used for the routing protocol. The performance of the proposed algorithm is compared with the benchmark protocols LEACH, DEEC, PSO, PSO-GA, and PSO-HAS. Residual energy, network throughput, and network lifetime are considered performance matrices. The simulation result showed that the proposed algorithm increases network lifetime by 10%-20% by comparison with the benchmark algorithm.

In this paper, an extendable fuzzy robust speed controller suitable for induction motor drive system was proposed. Firstly, the two-degrees-of-freedom (2DOF) robust control technology with feedforward control and disturbance elimination method was adopted. Upon parameter variation and load disturbance, the motor drive system could utilize a robust controller to generate compensation signals and reduce the impact on controlling performance of the motor drive system. The magnitude of the compensation signal was adjusted via the weighting factor. However, should a fixed weighting factor be adopted, system instability might be generated easily when time delay and saturation of control force occur. Based on the above, the smart method of extendable fuzzy theory (EFT) was adopted in this paper to adjust adequate weighting factors, where the controlling performance of the induction motor drive system could be improved accordingly. The method divided the speed difference between motor speed command and actual speed of the induction motor, and the variation rate for such speed difference into 20 regional categories. The correlation degree between the speed difference of actual feedback, variation rate for speed difference and each regional category was then calculated, where more suitable weighting factor was selected. Therefore, the proposed extendable fuzzy robust 2DOF controller with variable weighting factor designed will allow better performance for response in speed tracking and load regulation. Lastly, the simulation software Matlab/Simulink was applied to simulate the utilization of the controlling method proposed for the induction motor drive system. For both the response in speed tracking and load regulation, the simulation results proved that the extendable fuzzy robust speed controller proposed provided better controlling performance than the conventional robust controller.

The accurate state of health (SOH) estimation of lithium-ion batteries (LIBs) during operation is crucial to ensure optimal performance, prolonging battery life and preventing unexpected failure or safety hazards. This work presents a storage and performance optimised deep learning approach to predict the capacity based SOH of LIBs using raw sensor data from partial charging curves under constant current condition. The proposed model is based on a combination of a 1-dimensional convolutional and long-short term memory neural network and processes time, voltage and incremental capacity of partial charging curves as time series. The model is cross-validated on different aging scenarios reaching an overall MAE = 0.418% and RMSE = 0.531%, promising an accurate SOH estimation of LIBs under varying usage and environmental conditions in a real world application.

Grape dehydration is practiced widely in the food industry with large yields of sultanas produced globally. This paper proposes an investigation into grape microstructure changes as it is dried by imaging specimens at intervals during dehydration at two temperatures using scanning electron microscopy. Detailed images of the microstructure were obtained, and a unique image processing algorithm was developed to quantitatively analyse the properties of this microstructure. Two main methods were developed to obtain the complex boundaries of cells present in the grape tissue in over 36 SEM images. Segmentation of the binary image using an adapted watershed function obtained the most consistent and accurate morphological shape. This was compared to a secondary method which used Canny’s edge detection function, morphological closing and skeletonizing to outlines the cellular microstructure. MATLAB was utilised to convert these boundaries into measurable areas so that quantitative data on average cell area, perimeter and cell axis lengths was acquired. It was found that over drying time cell area and perimeter reduced as expected. Some variability in the data was clear due to only single samples being analysed for each temperature and time combination. The development of automatic image processing techniques will enable quantitative data to be extracted from these images. Trends in cell perimeter, diameter and shape will be used to demonstrate relationships between morphological structure, drying temperature, and duration.

Community centers play a crucial role in urban environments, providing physical and educational services to their surrounding communities, particularly for students. Among the many benefits for students are enhanced academic outcomes, improvement of behavioral problems, and increased school attendance. Such centers are also particularly vital for low-income and racial minority students as they are pivotal in giving them outside-of-school learning opportunities. However, determinants influencing attendance at community centers remain largely unexplored. Using census data, Boston Centers for Youth and Families (BCYF) attendance data, and specific center attributes, we develop human mobility gravitational models to predict attendance across the BCYF network. Using those models, we investigate the potential effects on general and student attendance by changing center attributes, such as facilities and operating hours. We also research the impact of changing the walking accessibility to those centers on their respective attendance patterns. After the analysis, we find that the most cost-effective policy to increase BCYF attendance is changing each center’s educational and recreational offerings far beyond any accessibility interventions. Our results provide insights into potential policy changes that could optimize the attendance and reach of BCYF Community Centers to underserved populations.

A reinforcement learning algorithm is proposed to improve the accuracy of short-term load forecasting (STLF) in this article. The proposed model integrates radial basis function neural network (RBFNN), support vector regression (SVR), and adaptive annealing learning algorithm (AALA). In the proposed methodology, firstly, the initial structure of RBFNN is determined by using SVR. Then, an AALA with time-varying learning rates is used to optimize the initial parameters of SVR-RBFNN (AALA-SVR-RBFNN). In order to overcome the stagnation for searching optimal RBFNN, a particle swarm optimization (PSO) is applied to simultaneously find promising learning rates in AALA. Finally, the short-term load demands are predicted by using the optimal RBFNN. The performance of the proposed methodology is verified on the actual load dataset from Taiwan Power Company (TPC). Simulation results reveal that the proposed AALA-SVR-RBFNN can achieve a better load forecasting precision as compared to various RBFNNs.

Security has become a critical issue in today’s highly distributed and networked systems. Network intrusion detection systems (NIDSs), especially signature-based NIDSs, are being widely deployed in a distributed network environment with the purpose of defending against a variety of network attacks. Most of the commercially available NIDSs are software based and rely on pattern matching to extract the threat from network traffic. The increase in network speed and traffic may make existing algorithms to become a performance bottleneck. Therefore it is very necessary to develop faster and more efficient pattern matching algorithm in order to overcome the troubles on performance of NIDSs. Therefore, we propose a multi fusion pattern matching algorithm for Network Intrusion Detection Systems. The results obtained in percentages from the proposed fusion algorithm given better values in terms processing time in milliseconds than the existing algorithms when data English text are applied to evaluate the fusion performances.

With the introduction of the IEC 61850 standard, the path is set for a single communication topology covering all substation levels. The standard has the potential to change the way substations are designed, build, tested and maintained. This means that the key segment of the substation, its protection system, will go through a transition period with the end goal of having a digitalized substation where all information exchange is performed over an Ethernet communication bus. The goal of this paper is to analyse the performance impact of the IEC 61850-9-2LE on the protection system. To do this, a laboratory hardware-in-the-loop test setup is developed representing traditional, hybrid and digital substation topology. This setup served to simulate faults and create transient waveforms in an extended IEEE 123 node test system, which were then used to detect the reaction times of protection relay devices. To verify protection relay results significant number of tests are performed clearly showing benefits which can be gained by distribution system digitalization.

In the previous work, the pure fatigue behavior of AM60 magnesium alloy (PF-AM60) was compared with the corrosion fatigue behavior of these specimens (CF-AM60). In this research, in continuation of the previous job, the pure fatigue behaviors of AM60 with polylactic acid (PLA) coating (PF-AM60-PLA) and also, corrosion fatigue behaviors of magnesium alloy with PLA coating (CF-AM60-PLA) were evaluated. Polymer coating was made by fused deposition modeling (FDM) with a 3D printer and attached to standard fatigue test specimens with a glue. Then, they were immersed in the simulated body fluid (SBF) for 27 days. In the end, a high-cycle bending fatigue test was performed on samples. The fracture surface of the samples was also observed using the field emission scanning electron microscopy (FESEM). Due to corrosion, the weight of the specimens redcued by an average of 35%. The corrosion rate decreased in the first 7 days and then increased. PF samples with coating had an average of 49% increase in fatigue lifetime. Regarding the CF samples, despite the use of a 10 times stronger solution, the fatigue lifetime of these samples decreased by only 35%. FESEM results also showed cleavage plates and striations. In addition, the separation of the glue from the coating and Mg was observed. Corrosion products including microcracks and holes were seen on the fracture surface of CF specimens, which caused stress concentration and crack growth. Holes caused by the release of gases were also observed in polymer coatings.

Rationale: Genetically modified (GM) foods have the potential to reduce food insecurity and address economic and environmental issues. Despite these benefits, GM foods continue to face significant criticism and there is limited information on public awareness and understanding of their nutritional and environmental health benefits in Nigeria. This study aims to fill this gap by investigating public knowledge and perceptions of GM foods in Victoria Island, Lagos. Methods: A convenience sampling method was used to recruit 369 respondents from Victoria Island, Lagos. Data were gathered using a structured questionnaire. The target population comprised employed adults either residing or working on Victoria Island. Statistical analyses were conducted to examine the relationship between sociodemographic factors and awareness of GM foods. Results: The study found that a majority of respondents (62.9%, n=232) were knowledgeable about GM foods and their associated issues. However, many believed that their community was not well-informed on the topic. Awareness of GM foods was significantly associated with sociodemographic factors such as marital status and education (P<0.01). Most respondents were well-informed about the environmental and health benefits of GM foods, with 61.8% believing that GM food production could sustainably reduce reliance on chemical pesticides, fertilizers, and other energy inputs, thus mitigating their ecological impacts. Additionally, most respondents did not feel that purchasing or consuming GM foods conflicted with their beliefs or would affect their food choices. Conclusion: The study concludes that while individual awareness of GM foods is relatively high, there is a perception that community awareness is low. Sociodemographic factors play a significant role in shaping public awareness and perceptions of GM foods. Recommendations: This includes government should actively educate the public on the ecological and health benefits of GM foods and address any safety concerns; Implement strict border controls and food labeling for GM products to protect consumer rights and preferences for organic foods, provide sufficient technical and financial assistance to farmers who participate in organic seed programs to enhance national food security. Significant Statement: This study highlights the importance of public education on GM foods and underscores the need for government intervention to ensure informed consumer choices and support for sustainable agricultural practices.

This paper examines the use of multisensory virtual reality (VR) as a novel approach in psychological therapy for autobiographical memory retrieval with benefits for cognitive enhancement, stress reduction etc. The research in this paper was done under Romanian Arut Research Grant no. 27/09/10/2023 ”Intelligent VR system for treating autobiographical/episodic memory deficits".  By simulating realistic multisensory experiences, VR technology offers an immersive environment that surpasses traditional therapeutic methods in effectiveness. Previous studies demonstrate improved outcomes in treating various psychological conditions (affective disorders and PTSD, specific phobias and age-related cognitive decline). Technological advancements in VR, such as olfactory integration cand contribute to the realism and therapeutic potential of these environments, the integration of various physical stimuli with VR holds promising potential psychological therapies and highlighting the need for further interdisciplinary research. In this pilot study we tested the efficacy of a new system for triggering autobiographical memory retrieval. For this we used images combined with odors in a congruent manner and offering participants the chance to interact with the VR environment by using 2 virtual hands. We evaluated the efficacy of this system using qualitative methods with emphasis on the evaluation of the emotions associated with memory recollection and the ease of triggering memories. All participants in our pilot study experienced intense emotions related to childhood or adolescence and the pleasant feelings they had during the experiment persisted even after it ended. This is an advancement to what exists currently and original research elements for our paper.

The difficulties faced by the society in its goal of reducing mortality and improving the health status during the period of the COVID-19 pandemic showed that it is necessary to develop new approaches in the therapy of infectious diseases, leading to higher treatment efficiency and few side effects. The subject of the present study is the formation and characterization of the proper-ties of stable liposomes loaded with extracts from Bulgarian medicinal plants and monitoring their antiviral action against the human strain of coronavirus OC43 (HCoV-OC43) in vitro. The hydrodynamic diameter and -potential of the liposomes containing each type of payload were determined with DLS and electrokinetics. The encapsulated amount of extracts was evaluated against quercetin and gallic acid by using colourimetric methods. The BALB 3T3 Neutral Red Uptake (NRU) phototoxicity/cytotoxicity assay was used to estimate the safety of the compounds. For assessment of the antiviral activity against HCoV-OC43 of liposomes (Lip) containing medicinal plant extracts, the cytopathic effect inhibition test was used. Measurements of the virucidal activity and the effect on the virus adsorption stage was carried out using the endpoint dilution method, and ∆lgs were calculated by comparison with untreated controls. The estimated photo irritation factors (PIF) for the Lip containing extracts were < 2 which assigns them to the category of non-phototoxic substances. When the extracts were introduced into the liposomes as their carriers, the antiviral activity of the vesicles against the replication of HCoV-OC43 in vitro in-creased by several times compared to their individual activity described in our previous study. The determination of the effect of structures loaded with extracts on the extracellular virions and the stage of their adsorption to sensitive HCT-8 cells proved that the liposomes do not affect directly the viral surface or cell membrane, but only perform a function of carriers of the active substances and the observed result is due solely to the intracellular action of the extracts.

Previous research demonstrates that the interruption of immersive experiences may lead to a bias in the results of questionnaires. Thus, the traditional way of presenting questionnaires, paper-based or web-based, may not be compatible with evaluating VR experiences. Recent research has shown the positive impact of embedding questionnaires contextually into the virtual environment. However, a comprehensive overview of the available VR questionnaire solutions is currently missing. Furthermore, no clear taxonomy exists for these different solutions in the literature. To address this, we present a literature review of VR questionnaire user interfaces (UI) following PRISMA guidelines. Our search returned 1.109 initial results, which were screened for eligibility, resulting in a corpus of 25 papers. This paper contributes to HCI and games research with a literature review of embedded questionnaires in VR, discussing the advantages and disadvantages and introducing a taxonomy of in-VR questionnaire UIs.

Abstract This qualitative research study was aimed at exploring Covid-19 pandemic and its impact via online engagement on disadvantaged undergraduate students resulting in digital divide. The study was supported by the connectivism theory. The methodology approach was an eight year (2014-2022) duration systematic literature review using Educational Resources Information Center (ERIC), Google Scholar, Scopus, and Web of Science (WoS) databases as advanced search strategies. Findings from the SLR provided 56 included relevant publications as confirmed in the Reference Section. Here, findings justified factors responsible for digital divide and the digital divide impacts. Connectivism was suggested as an approach to control digital divide. This study recommends connectivism to control digital divide experienced among disadvantaged undergraduate students in South African universities via numerous supports for free trainings in computer skills, while the government provides low data cost and free Wi-Fi services.

The primary purpose of this study was to determine the prevalence of drug-drug interaction (DDI) and duplicate therapy in chronic patients in a completely random study population engaged in digital health apps. In this cross-sectional study, polypharmacy checks for 100 completely anonymous patients were analyzed for the occurrence of DDIs and duplicate therapy. Logistic regression models were used to identify factors associated with DDIs and duplicate therapy. DDIs and duplicate therapy prevalence were 34% and 33%, respectively. Chi-Square test discovered a significant association between the DDIs and duplicate therapy variables. Logistic regression models showed a strong association between the number of medications taken and higher odds of DDIs occurring in our population only. In conclusion, our study shows that polypharmacy is a determining factor for the occurrence of unwanted DDIs, and the prevalence of duplicate therapy and DDIs is around 33%, increasing an issue regarding patient safety and its burden to the healthcare system.

This research focuses on the use of the HEC-RAS model to estimate flash flood risk. It combines advanced hydraulic modeling techniques and precise data entry. The aim is to contribute knowledge to assess flash flood risk and reduce impacts on communities and infrastructure. The selection of study areas with a history of severe flooding, such as the Lam Saphung Basin, Phrom River Basin, and Lam Chern River Basin Part 1 in Thailand, highlights the importance of thorough flash flood risk assessment. By leveraging the HEC-RAS model, the results of this research inform proactive risk management strategies, improve emergency preparedness and help develop sustainable mitigation measures. The results are important in developing emergency response strategies and overall recovery ability in areas at risk of flash floods. The research combines advanced hydrologic modeling and real-world flash flood data. In addition to the flood condition assessment, the extent of the flood area and associated hazards were assessed using a two-case simulation strategy. The study covers future scenarios related to land use changes and retrospective analysis of past flood events. The results have practical implications for improving emergency response strategies, land use planning, and overall resilience in flash flood-prone areas. The integrated approach emphasizes the research output to providing insights and actionable solutions for communities facing ongoing challenges posed by flash floods.

The present study aims to evaluate the antibacterial activity of five commercially available essential oils (EOs): Lavender (LEO), Clove (CEO), Oregano (OEO), Eucalyptus (EEO), and Peppermint (PEO) against the most-known MDR Gram-positive and Gram-negative bacteria - Staphylococcus aureus (ATCC 25923), Escherichia coli (ATCC 25922) and Pseudomonas aeruginosa (ATCC 27853) - alone and in various combinations. Gas Chromatography-Mass Spectrometry (GC-MS) analysis established their complex composition. Then, the antibacterial activity was investigated in vitro by diffusimetric antibiogram method, using sterile cellulose discs with Ø 6 mm impregnated with 10 µl of sample and sterile borosilicate glass cylinders loaded with 100 µl of sample; MIC (µg/mL) for each EO was calculated from IZD values (mm) measured after 24 hours. The following EO combinations were evaluated: OEO+CEO, CEO+EEO, CEO+PEO, LEO+EEO, and EEO+PEO. Then, the influence of each dual combination on 3 conventional antibacterial drugs – Neomycin (NEO), Tetracycline (TET), and Bacitracin (BAC) - activity was investigated. The most active EOs against S. aureus and E. coli were LEO and OEO (IZD = 40 mm). They were followed by the CEO and EEO (IZD = 20-27 mm); PEO exhibited the lowest antibacterial activity (IZD = 15-20 mm). EEO alone showed the highest inhibitory activity on P. aeruginosa (IZD = 25-35 mm). It was followed by the CEO, LEO, and EEO (IZD = 7-11 mm), while PEO proved no antibacterial action against it (IZD = 0 mm). Only one synergic action was recorded (OEO+CEO against P. aeruginosa); EEO+PEO revealed partial synergism against S. aureus and CEO+PEO additive behavior against E. coli. Two triple associations with TET showed partial synergism against E. coli, and the other 2 ones (with NEO and TET) evidenced the same behavior against S. aureus; all contained EEO+PEO or CEO+PEO. Most combinations reported indifference. However, numerous cases were of antagonism between constituents included in double and triple combinations, and EOs with the strongest antibacterial activities belong to the highest antagonistic combinations. A consistent statistical analysis supports our results, showing that EOs with moderate antibacterial activities could generate combinations with higher inhibitory effects based on synergistic or additive interactions.

The nuclear reactor measurement system is a crucial component of the nuclear measurement system in a nuclear power plant. Its primary function is to measure the power distribution within the reactor core using detectors, calibrate, and provide data on core fuel consumption. Therefore, the study of the detectors' reliability is crucial for ensuring the safe operation of the nuclear power system. The article describes the operational mechanism of the gas ionization chamber detector utilized in the intermediate-range detector of the off-board nuclear measurement system. It also analyzes the movement of particles between the plates during the ionization process of the nuclear reaction taking place in the detector. The functional relationship between the current in the recombination region and the ionization region involved in the actual working condition, and the change with the increase of voltage between the plates, is deduced. A mathematical model is established for the number of pulses generated between the plates and the magnitude of the voltage between the plates. Subsequently, the change in the offset of the voltage corresponding to the inflection point of the ping curve and the change rule of the slope of the ping curve are investigated. Combined with the analysis of experimental data, the results show that the initial particle energy of Ar+, the primary sensitive particle on the detector surface, follows a normal distribution and is influenced by the energy loss associated with the initial velocity and the voltage between the plates. The trends of the inflection points and slopes of the ping curves can be utilized to evaluate the performance and operational status of the detector. Combined with the results of the experimental data analysis, the fit is good, and the inflection point currents in the normal state decrease by about 1.5% annually. The intelligent diagnostic system, based on the method studied in this paper, has been successfully implemented in the RPN digital retrofit and upgrade project at Qinshan No. 2 Plant.

The textile and clothing (T&C) industry is not usually viewed as an exemplar of sustainable de-velopment and the circular economy, as the industry has hitherto made its products in linear fashion, with relatively little recycling of the finished goods. This article examines the industry’s approach to the core sustainability concept and the circular economy in particular, through a re-view of the available academic literature, evidence from corporate sustainability reports and websites, and feedback from an online survey of industry professionals. The role of digital technology deployment in engendering sustainability and the circular economy in the industry is also explored. The study finds that whilst sustainability is now firmly embedded at the strategic level in the vast majority of companies studied, attitudes towards the circular economy remain fickle. The use of digital technologies in support of sustainability objectives is also limited at present, but the article concludes that the need to meet compliance requirements and new cus-tomer perceptions of sustainability will speed the transition to circular economy activities, facili-tated by greater exploitation of digital technologies. Building upon the research findings, existing models and an initial conceptual framework, a simple operational model for initiating such a transition for small-to-medium sized enterprises in the T&C industry is put forward.

In this paper, low circumferential reciprocating load foot-scale tests were performed on two truncated PHC B 600 130 tubular piles with bearing nodes to characterize the damage process and morphology of the specimens and to investigate the load-carrying performance of the members. The test results reveal that under the action of tensile-bending-shear loading, the bearing concrete in the node area buckles and is damaged, the anchored reinforcement in the node area yields, the constraint is weakened, an articulation point is formed, and the node rotational capacity increases. When the embedment depth increases from 200 mm to 300 mm, the ultimate bearing capacities of the positive and negative nodes increase by 57.60% and 54.60%, respectively. A numerical simulation is used to verify the test results. Considering the three types of piles with truncated nodes, the numerical simulation is used to analyze the node-bearing capacity at different embedment depths. Finally, two preferred node types are proposed as follows: pipe pile core-filled longitudinal reinforcement anchored into the bearing node and pipe pile body longitudinal reinforcement anchored into the bearing node + pipe pile core-filled longitudinal reinforcement anchored into the bearing node, with preferred embedment depths of 350 mm and 200 mm, respectively.

The disruptive application of ChatGPT (GPT-3.5, GPT-4) to a variety of domains has become a topic of much discussion in the scientific community and society at large. Large Language Models (LLMs), e.g., BERT, Bard, Generative Pre-trained Transformers (GPTs), LLaMA, etc., have the ability to take instructions, or prompts, from users and generate answers and solutions based on very large volumes of text-based training data. This paper assesses the impact and potential impact of ChatGPT on the field of digital forensics, specifically looking at its latest pre-trained LLM, GPT-4. A series of experiments are conducted to assess its capability across several digital forensic use cases including artefact understanding, evidence searching, code generation, anomaly detection, incident response, and education. Across these topics, its strengths and risks are outlined and a number of general conclusions are drawn. Overall this paper concludes that while there are some potential low-risk applications of ChatGPT within digital forensics, many are either unsuitable at present, since the evidence would need to be uploaded to the service, or they require sufficient knowledge of the topic being asked of the tool to identify incorrect assumptions, inaccuracies, and mistakes. However, to an appropriately knowledgeable user, it could act as a useful supporting tool in some circumstances.

Digital dentistry, including CAD/CAM dentistry, is perhaps the most disruptive innovation in dentistry to date. The rapid development of digital dentistry technologies over the past several decades has enabled clinicians to improve patient care by significantly reducing the time necessary for the restorative phase of treatment. Advancements in intra-oral scanning and computer-aided design and manufacturing (CAD/CAM), in conjunction with new dental CAD/CAM ceramic materials, have simplified patient care and made same-day dentistry a reality. This review aims to present the most recent advancements described in current literature as well as to document the successful implementation of digital dentistry into a predoctoral program. The overall process of CAD/CAM same-day dentistry and the accompanying advancements in software and materials were presented and discussed. Implementation of technology and personnel requirements were reviewed. CAD/CAM dentistry has been influential in shaping and improving dental practice and education, and this influence will only continue with time.

This paper empirically analyzes the relationship between digital inclusive finance and rural income, and demonstrates that digital inclusive finance plays a significant role in promoting rural income, based on the 2012-2018 panel data of 17 cities in Henan Province of China. Further dimensional research unveils that all of its breadth of coverage, depth of use and degree of digitization present significant positive correlation with rural income, and a robustness test was conducted through the sub-sample method. In addition, according to regression analysis on the influencing factors of digital inclusive finance through the Tobit model, the level of economic development, the Internet popularity rate and the urbanization rate have a positive effect on the development of digital inclusive finance in Henan, while the income gap between urban and rural areas and the degree of opening up have a negative effect. Finally, predicated on the analysis of the restrictive factors of Henan’s digital inclusive finance in increasing rural income, the paper puts forward specific policy proposals based on the native state quo.