Purpose: The evaluation of the efficacy of topical hypotensive treatment and/or systemic corticosteroids therapy in patients with elevated intraocular pressure and Graves’ orbitopathy (GO). Methods: 172 eyes in 86 individuals with duration of GO ≥ 3 months, intraocular pressure in either eye ≥ 25.0 mmHg and GO ranked ≥ 3 at least in one eye in modified CAS form, were included. The study subjects were divided into three treatment subgroups: subgroup I was administered latanoprost QD; subgroup II was administered a combined preparation of brimonidine and timolol BID; subgroup III was the control group, not receiving any topical hypotensive treatment. All the study participants received systemic treatment – intravenous corticosteroid therapy at the same dose, according to the EUGOGO guideline Results: On the final visit, the mean IOP value was significantly lower in all treatment subgroups comparing to the initial values. In both subgroups receiving topical treatment the IOP reduction was higher than in the control group receiving systemic corticosteroids only. However, the latanoprost eye drops decreased intraocular pressure more effectively than drops containing brimonidine and timolol. Conclusion: Topical ocular hypotensive treatment is effective in reducing intraocular pressure in GO and decreases intraocular pressure more effectively than systemic corticosteroid therapy alone.

While visual assessment is the standard technique for burn evaluation, computer-aided diagnosis is increasingly sought due to high number of incidences globally. Patients are increasingly facing challenges which are not limited to shortage of experienced clinicians, lack of accessibility to healthcare facilities, and high diagnostic cost. Certain number of studies were proposed in discriminating burn and healthy skin using machine learning leaving a huge and important gap unaddressed; whether burns and related skin injuries can be effectively discriminated using machine learning techniques. Therefore, we specifically use pre-trained deep learning models due to deficient dataset to train a new model from scratch. Experiments were extensively conducted using three state-of-the-art pre-trained deep learning models that includes ResNet50, ResNet101 and ResNet152 for image patterns extraction via two transfer learning strategies: fine-tuning approach where dense and classification layers were modified and trained with features extracted by base layers, and in the second approach support vector machine (SVM) was used to replace top-layers of the pre-trained models, trained using off-the-shelf features from the base layers. Our proposed approach records near perfect classification accuracy of approximately 99.9%.

Several common and functional genes are known to contribute to responsiveness to blood pressure (BP) therapy. BP therapy is typically guided by algorithms that do not include a patient’s genetic information. This study aimed to determine the impact of a multi-organ genetic panel on BP response to pharmacotherapy. Eighty-six patients completed one study visit consisting of a buccal swab collection, measurement of office BP, and a medical chart review for BP history. Genes analyzed included those that encode for one drug metabolizing enzyme, renal Na+ handling, vascular, and cardiac function. Relationships between genotype and control of BP (<140/<90), ∆ systolic BP, ∆ diastolic BP, and ∆ mean arterial BP were assessed. SLC12A3 resulted in a significant association between the target drug and the functional genotype for BP control (<140/<90 cut off) (p<0.05). Conversely, three of five renal genotypes were associated with BP control using 120/80 as a cut-off (p<0.05). Three of four cardiac genotypes were associated with the BP control at <140/<90, with one being statistically significant (position 49 of ADRB1). Only one vascular genotype was predictive of blood pressure control at <140/<90. We found a significant drop in mean BP from baseline in six genes, three important in the diuretic response and three in β-blockade (p<0.05 on target drug vs. not). These results demonstrate that a multi-gene panel for renal Na+ handling, vascular function, and cardiac output may influence the BP response to therapy, but larger studies with more statistical power are needed.

We previously reported how the loss of CHIP expression (Carboxyl terminus of Hsc70-Interacting Protein) during pressure overload resulted in robust cardiac dysfunction, accompanied by a failure to maintain ATP levels in the face of increased energy demand. In this study, we analyzed the cardiac metabolome after seven days of pressure overload and found an increase in long- and medium-chain fatty acid metabolites in wild-type hearts, a response that was attenuated in mice that lack expression of CHIP (CHIP^-/-). These findings suggest that CHIP may play an essential role in regulating oxidative metabolism, pathways that are regulated in part by the nuclear receptor PPARα (Peroxisome Proliferator-Activated Receptor alpha). Next, we challenged CHIP^-/- mice with the PPARα agonist, fenofibrate. Surprisingly, treating CHIP^-/- mice with fenofibrate for five weeks under non-pressure overload conditions resulted in a loss of skeletal muscle mass and a marked increase in cardiac fibrosis, accompanied by a decrease in cardiac function. Isolated CHIP^-/- cardiac fibroblasts treated with fenofibrate did not increase synthesis of collagen or TGFβ, suggesting that the fibrosis observed in CHIP^-/- hearts likely depends on signaling from other cell types or circulating factors. In conclusion, in the absence of functional CHIP expression, fenofibrate results in unexpected cardiac pathologies. These findings are particularly relevant to patients harboring loss-of-function mutations in CHIP and are consistent with a prominent role for CHIP in regulating cardiac metabolism.

We evaluated the association of blood pressure with blood levels of cadmium, lead, and cadmium and lead together (cadmium+lead) in a representative sample of adolescents from Korea by use of 2010-2016 data from the Korean National Health and Nutrition Examination Survey (KNHANES). This cross-sectional study enrolled adolescents aged at 10-18 years-old who completed a health examination survey and had blood measurements of lead and cadmium. The association of adjusted mean differences in diastolic and systolic blood pressure with doubling of blood lead and cadmium were estimated by regression of blood pressure against log₂-transformed blood metals and their quartiles after covariate adjustment. Adjusted odds ratios for prehypertension were calculated for log₂-transformed blood levels of lead and cadmium and their quartiles. Our analysis of adolescents in Korea indicated that blood levels of lead and cadmium were not significantly associated with increased blood pressure or risk of pre-hypertension. However, the cadmium+lead level was associated with pre-hypertension. Previous studies showed that blood levels of lead and cadmium were associated with increased blood pressure and risk of hypertension in adult populations. We found no such effect in Korean adolescents, although the cadmium+lead level was associated with prehypertension. These differences may be because adolescents generally have lower levels of these blood metals or because adolescents only rarely have hypertension.

As shown in former papers, the nonadiabatic Heisenberg model presents a novel mechanism of Cooper pair formation generated by the strongly correlated atomic-like motion of the electrons in narrow, roughly half-filled "superconducting bands". These are energy bands represented by optimally localized spin-dependent Wannier functions adapted to the symmetry of the material under consideration. The formation of Cooper pairs is not the result of an attractive electron-electron interaction but can be described in terms of quantum mechanical constraining forces constraining the electrons to form Cooper pairs. There is theoretical and experimental evidence that only this nonadiabatic mechanism operating in superconducting bands may produce eigenstates in which the electrons form Cooper pairs. These constraining forces stabilize the Cooper pairs in any superconductor, whether conventional or unconventional. Here we report evidence that also the experimentally found superconducting state in bismuth at ambient as well as at high pressure is connected with a narrow, roughly half-filled superconducting band in the respective band structure. This observation corroborates once more the significance of constraining forces in the theory of superconductivity.

This study investigates the compliance level with Regional Regulations (PERDA) on building construction in Banjarmasin, focusing on urban areas and riverbanks. The motivation behind this research is the observed low adherence to PERDA, which aims to ensure orderly and safe development. Key issues include unauthorized building modifications, inadequate drainage systems, and poor sanitation, resulting in environmental damage and reduced quality of life. The study employs both qualitative and quantitative methods, including surveys and interviews, to gather data from 100 building samples and various stakeholders. Findings reveal significant non-compliance with land use regulations, building coefficients (KDB, KLB), and green space requirements (KDH), with 27% of buildings lacking necessary permits (IMB, PBG, SLF). Main causes include lack of awareness, high costs, and administrative hurdles. Recommendations for improvement include enhanced public education, streamlined administrative processes, stronger enforcement of regulations, and increased community involvement in planning. Effective inter-agency coordination is also crucial. These measures aim to foster a more organized, safe, and sustainable urban development in Banjarmasin. Enhanced compliance with PERDA will mitigate negative impacts such as flooding and environmental degradation, contributing to the overall welfare of the community.

This critical review delves into the often-overlooked aspect of early childhood language development: the potential impact of exposure to foreign languages. While multilingualism is widely celebrated for its cognitive and cultural benefits, emerging research suggests that early exposure to foreign languages may pose challenges for young children's linguistic development. The review synthesizes findings from 17 studies to explore the complexities surrounding this issue, including linguistic confusion, language delay, reduced vocabulary growth, impaired language processing, and socio-emotional implications. Additionally, mitigating factors and future directions for research and intervention are discussed. By shedding light on this topic, the review aims to inform educators, parents, and policymakers about the nuances of bilingual language acquisition and the importance of providing tailored support to optimize early childhood language development in multilingual contexts.

The industrial metaverse paradigm is generally a virtual environment that integrates various technologies such as augmented reality (AR) and mixed reality (MR) to enhance business operations and processes. It aims to streamline workflows, reduce error rates, improve efficiency, and provide a more engaging experience for employees. The promise of the industrial Metaverse to drive sustainability and resource efficiency is compelling. Utilizing advanced technologies like the Industrial Metaverse is essential for staying competitive in today’s rapidly evolving business environment. However, the environmental impact of the technologies underpinning the industrial metaverse, like data centres and network infrastructure, should not be overlooked. The ecological footprint of these technologies must be considered in the sustainability equation. Researchers have warned that by 2025, without sustainable AI practices, AI will consume more energy than the human workforce, significantly offsetting carbon-zero gains. As the metaverse persists in evolving and gaining momentum, it will be necessary for companies to prioritize sustainability and explore new ways to balance technological advancements with environmental stewardship. However, recent studies have conjectured that the Metaverse holds the potential to reduce carbon emissions, as digital replacements for physical goods become more prevalent and physical activities like mobility and construction are reduced. However, the specific extent to which this substitution can alleviate environmental concerns remains understudied, presenting a knowledge gap in understanding the real-world impact of digital replacements. Thus, the objective of this paper is to provide a comprehensive review of the industrial metaverse as well as explore the environmental impact of the industrial metaverse. The methodological approach is that of integrative literature review design wherein multiple sources from web science and databases such as ACM library, IEEE Library, and Google Scholar, were analysed to provide a comprehensive understanding of the developments in the industrial metaverse. Specifically, firstly by considering the Industrial metaverse architecture we elucidate the concept of the "industrial metaverse" and the associated enabling technologies. Secondly, an exploration through discussion, of the prevalent use cases and deployment of the emerging industrial metaverse. Thirdly, exploration of the impact of the industrial metaverse on the environment. In the fourth instance, we address novel security and privacy risks as well as upcoming research challenges, keeping in mind that the industrial metaverse is based on a strong data fabric. Results point to the Industrial Metaverse as having both positive and negative environmental effects by energy consumption, e-waste, and pollution. Overall research, however, indicates that most industrial metaverse applications have a positive environmental impact and subsequently trend toward sustainability. Ultimately for sustainability in the industrial metaverse, enterprises may consider utilizing renewable energy sources and cloud services. Furthermore, examining the effects of products on the environment as well as creating a circular economy.

This study investigates the prevalence, causes, and spatial distribution of Abandoned, Lost, or Discarded Fishing Gears (ALDFGs) in the Gulf of Gabès, a critical fishing area in Tunisia. Five main fishing gear types—benthic trawls, encircling nets, longlines, gillnets, and trammel nets were analyzed for their loss rates and contributing factors. The study involved extensive surveys among local fishermen using geographic information system (GIS) tools for spatial mapping. The findings reveal varying loss rates among different gear types, with longlines experiencing the highest losses (59%), followed by trammel nets (45%), gillnets (40%), trawls (38%), and encircling nets (36%). Causes of gear loss include entanglement on obstructions, conflicts with other fishing gears, entanglement with marine animals, adverse weather conditions, and intentional dumping at sea. The study highlights the challenges posed by the consistent increase in regional fishing efforts. Spatial distribution mapping indicates two significant concentrations of ALDFGs, correlating with specific fishing activities and depths. The study emphasizes the importance of addressing gear losses as a threat to marine biodiversity and ecosystem health. Recommendations for mitigation include improving boat equipment, raising awareness among fishermen, implementing effective waste management, and exploring economic incentives for ALDFG recovery. This research contributes essential insights for fisheries management, environmental conservation, and sustainable practices in the Gulf of Gabès. Collaborative efforts are crucial to developing and implementing strategies that minimize the impact of ALDFGs on the marine environment while supporting the socio-economic interests of fishermen.

Objectives: To analyse and detail surgical process improvement activities that achieve the highest economic impact. Methods: Over 4 years, a team of technicians and healthcare professionals implemented a set of Lean surgical process improvement projects at Vall d’Hebron University Hospital (VHUH), Barcelona, Spain. These projects now form part of the daily routine in the surgical process. The economic impact on the hospital's surgical activity budget was analysed. Results: Process improvements have led to annual operational savings of over € 8.5 million. These improvements include better patient flow, better management of information between healthcare professionals, and improved logistic circuits. Conclusions: The current cultural shift towards process management in large hospitals implies shifting towards results-based healthcare, patient-perceived value (VBHC) and value-added payment. A Lean project implementation process requires long-term stability. The reason a considerable number of projects fail to complete process improvement projects is the difficulty involved in establishing the project and improving management routines. Few studies in the literature have investigated the economic impact of implementing Lean management a posteriori, and even fewer have examined actual cases. In this real case study, changes to surgical block management were initiated from zero. After being carefully thought through and designed, changes were carried out and subsequently analysed.

The aim of this study was to explore the perceived impact of artificial intelligence (AI) on radiographers’ activities and profession in Switzerland. A survey conducted in the UK, translated into French and German, was disseminated through professional bodies and social media. The participants were Swiss radiographers (clinical/educators/ researchers/students) and physicians working within the medical imaging profession (radiology/nuclear medicine/radiation-oncology). The survey covered five sections: demographics, AI-knowledge, skills, confidence, perceptions about the AI impact. Descriptive, association statistics and qualitative thematic analysis were conducted. A total of 242 responses were collected (89% radiographers; 11% physicians). AI is being used by 43% of participants in clinical practice, but 63.8% of them did not feel confident with AI terminology. Participants viewed AI as an opportunity (57.2%), while 18.5% considered it as a threat. The opportunities were associated with streamlining repetitive tasks, minimizing errors, increasing time towards patient-centred care, research, and patient safety. The significant threats identified were reduction on work positions (22.6%), decrease of the radiographers’ expertise level due to automation bias (16.4%). Participants (68.3%) did not feel well trained/prepared to implement AI in their practice, highlighting the non-availability of specific training (87.6%). 93% of the participants mentioned that AI education should be included at undergraduate education program. Although most participants perceive AI as an opportunity, this study identified areas for improvement including lack of knowledge, educational supports/training, and confidence in radiographers. Customised training needs to be implemented to improve clinical practice and understanding of how AI can benefit radiographers.

The construction industry generates significant CO2 emissions, and rebar is a major contributor to this environmental impact. Extensive research has been conducted to address this issue. Recent advancements have introduced algorithms to reduce rebar waste and consumption, demonstrating the feasibility of achieving near-zero rebar cutting waste (N0RCW) by considering special-length rebars. However, conventional lap splices, the most common rebar joint method, consistently consume excessive rebar quantities despite extending beyond their mandated zones. Conversely, couplers eliminate rebar lengths required for lapping splices, reducing the usage of rebar. Applying special lengths and couplers in heavily loaded structures like diaphragm walls can significantly reduce rebar usage and cutting waste, consequently reducing CO2 emissions and associated costs. This study aims to optimize rebar consumption and sustainability in diaphragm wall structures by integrating mechanical couplers with a special-length rebar approach. A case study confirmed a substantial reduction in purchased rebar usage (17.95% and 5.38%) and carbon emissions (15.24% and 2.25%) compared to the original design and previous study, respectively. Broadly implementing the proposed method across various buildings and infrastructure projects could further multiply these benefits, fostering the achievement of SDGs adopted by the United Nations for sustainable construction.

Although agricultural crops production systems in subtropical plateau regions currently pose high environmental risks, especially in developing countries, their environmental impacts and emission-reduction potentials remain unclear, and the development potential of such systems is likely huge. We conducted a case study in Yunnan Province, China, to quantify the environmental impacts from crop production during 2002–2021. The life cycle assessment method was employed to identify factors driving the environmental impacts, and potential mitigation strategies were proposed. The yield and total nutrient input of grain crops in Yunnan Province increased over the 20-year period, and environmental footprint of crops production in Yunnan Province was higher than that of other regions. Average annual mean greenhouse gas (GHG) emissions and soil acidification potentials (AP) and water eutrophication potentials (EP) of crops production during 2002–2021 were 732 kg CO2-eq·Mg-1, 15.8 kg SO2-eq·Mg-1, and 2.7 kg PO4-eq Mg-1, respectively. GHG emissions from g crops mainly originated from applying agricultural materials during the crop life cycle. There was a significant correlation between surplus nitrogen and environmental impacts. Scenario testing showed that through crop sowing, nutrient regulation, and crop management, the crop yield could be increased and environmental costs could be reduced. The greatest reductions were found in wheat production: 53.1%, 67.9%, and 67.7% for GHG emissions, AP, and EP, respectively. Adopting comprehensive agricultural management measures could reduce the negative impact of crops production on the environment in subtropical plateau areas and achieve sustainable agricultural development.

The phenomenon of droplet impact on moving surfaces is widely observed in fields such as transportation, rotating machinery, and inkjet printing. Droplets exhibit non-axisymmetric behavior due to the motion of solid surfaces which significantly determines core parameters such as contact time, maximum spreading radius, and bounding velocity, thereby affecting the efficiency of related applications. In this study, we focus on kinetics and morphology of the non-axisymmetric bouncing behaviors for droplets impacting on a moving superhydrophobic surface (SHPS) within the normal (Wen) and tangential (Wet) Weber numbers. Considering the influences of moving surface on the contact area and contact time, the previous scaling formula for the horizontal velocity of droplets has been improved. Based on the velocity superposition hypothesis, we establish a theoretical model for the ratio of the maximum spreading radius at both ends depending on Wen and Wet. This research provides both experimental and theoretical evidence for understanding and controlling the non-axisymmetric behavior of droplets impacting on moving surfaces.

The inclusion of scientific journals in prestigious indexers is often associated with higher citation rates; journals included in such indexers are significantly more acknowledged than those that are not included in them. This phenomenon refers to the Matthew effect on journal citations, according to which, journals in exclusive rankings tend to be increasingly cited. This paper shows the opposite: that the inclusion of journals in local indexers ruled by inclusive logic reduces the Matthew effect on journal citations, since it enables them to be equally exposed. Thus, we based our arguments on the comparison of 68 Brazilian journals before and after they were indexed in the Scientific Periodicals Electronic Library (Spell), which ranks journals in the Brazilian management field based on local citations. Citation impact indicators and iGini (a new individual inequality analysis measure) were used to show that the inclusion of journals in Spell has increased their impact factor and decreased their citation inequality rates. In addition, the results indicated that the effect between ranking and inequality has declined after journals were included in Spell; this outcome indicates that the database has reduced the Matthew effect on journal citations.

Certain services can help avoid environmental impact in larger contexts. However, there is no commonly agreed bottom-up methodology for calculation of the total net reduction effect of specific digital services. Life Cycle Assessment (LCA) is a common denominator for most methodologies. The most common method is the Attributional LCA (ALCA), and recently the emerging handprint ALCA estimating so-called positive environmental impacts. Moreover, Consequential LCA (CLCA) can be used to capture market effects. The third conceptual approach is Input-Output LCA. The purpose is to propose and test a new method based on some of the existing ones. The existing concepts are compared and a synthesis is made to create a practical but still useful method. The new method is applied to two illustrative cases in the Information and Communication Technology (ICT) domain; the introduction of a 5G enabled drone for pipe inspection and the 5G enabled health consultation. Compared to simplified ALCA, the difference between the absolute score for the baseline system and the target system changes up to 15% when the proposed simplified CLCA (SCLCA) method is used. The results show that SCLCA, when combined with analytical methods for expressing digital ICT services’ own impact, is a fruitful approach which is both practical and feasible.

Registration of the flow pattern fine structure and the matter distribution of a free falling liquid drop in a target fluid at rest in the impact mode of coalescence, when the kinetic energy of the drop exceeds its available potential surface energy (APSE), was carried out by photo and video recording. The main attention was paid to the study of the flow structure at the initial stage of the cavity formation. To carry out color registration, the flow pattern was illuminated by several matrix LED and fiber optic sources of constant light. The planning of experiments and interpretation of the results were based on the properties of the complete solutions of the fundamental equations of fluid mechanics system, including the transfer and conversion of energy processes. Complete solutions of the system of equations describe large-scale flow components that are waves or vortices as well as thin jets (ligaments, filaments, fibers, trickles). In experiments, the jets are accelerated by the converted available potential surface energy (APSE) when the free surfaces of merging fluids were eliminated. The experiments were performed with the coalescence of water, solutions of alizarin ink, potassium permanganate, copper sulphate or iron sulphate drops in deep water. In all cases, at the initial contact, the drop begins to lose its continuity and breaks up into a thin veil and jets, the velocity of which exceeds the drop contact velocity. Small droplets, the size of which grows with time, are thrown into the air from spikes at the jet tops. On the surface of the liquid, the fine jets leave colored traces that form linear and reticular structures. Part of the jets penetrating through the bottom and wall of the cavity forms an intermediate covering layer. The forming layer jets are separated by interfaces of the target fluid. The processes of molecular diffusion equalize the density differences and form an intermediate layer with sharp boundaries in the target fluid. All noted structural features of the flow are also visualized when a fresh water drop isothermally spreads in the same tap water. The fast-changing and finely structured diffuse boundary of merging fluids, which at the initial stage has a complex and irregular shape, is gradually smoothed out by molecular diffusion processes. The similar flow patterns were observed in all performed experiments, however the geometric features of the flow depend on the individual thermodynamic and kinetic parameters of the contacting fluids.

The relationship between child psychology and the widespread usage of mobile devices in the modern day is examined in "The Mobile Dilemma: Child Psychology and the Era of Technological Dependence." The abstract serves as a brief synopsis of the work, highlighting its important ideas and arguments. Concerns concerning the effects of excessive time spent on mobile devices on children's mental health and development have arisen in this age of technology dependency. The essay opens by pointing out the importance of investigating the psychological effects of kids' exposure to mobile gadgets. The effects of mobile phone addiction on learning, memory, and social and emotional health are investigated. The neurodevelopmental implications are explored further in the abstract, with a focus on the impact of mobile technology on brain plasticity and the formation of the developing brain. It offers advice on how to establish appropriate limits for children's screen time, encourages the development of digital literacy, and promotes responsible behavior.The pros and cons of using mobile devices in the classroom are also examined, along with their effects on students' ability to study and the risks and difficulties that could arise from implementing such a strategy. The emotional and social impacts of mobile device addiction are discussed in the abstract. This includes the impact on one's social life, empathy, ability to communicate, and sense of self-worth. The abstract also stresses the importance of interdisciplinary efforts involving parents, teachers, psychologists, and legislators to combat mobile device addiction through intervention and preventative techniques. Future directions are highlighted, with a focus on topics such as mobile technology development, digital well-being, privacy protection, mental health implications, screen time limits, digital literacy, and the impact of cultural and socioeconomic variables.

During the Covid 19 pandemic, we saw a huge impact on the lives of individuals in cities. The way people responded was controlled and limited. The lockdown restricted a lot of movements in the cities as well as contained the citizens in their houses. Through a semi-structured interview, the research aims to understand the change in behaviour and response of individuals across various cities. The paper aims to understand how people change their day-to-day life in cities during the pandemic and while the restrictions getting released post the first wave. The paper also understands how the pandemic impacted urban spaces and what value they hold for people. By interviewing individuals from different cities, the data were transcribed and analysed to understand this behavioural change and the attitude of people. The outcome of the research was derived as a concept map through the codes generated during the research.

This article aims to investigate gaps in the law and policies on e-waste management in communi-ties of Thailand and suggests a guideline for improving, developing, and designing legal measures and state policies for more effective enforcement of the law on e-waste management in communities. The findings reveal that the currently applicable law of Thailand lacks effective approaches and rules for e-waste management. Also, there is not any implementation of key envi-ronmental principles for e-waste management in communities, such as the Polluter Pays Principle (PPP) that requires manufacturing companies to take part in being responsible for disposal ex-penses or the Public Participation principle that requires users, manufacturers, distributors, and government agencies to take parts in disposing e-waste. As a result, problems of e-waste in com-munities of Thailand have been continuously increasing. According to such problems, the authors suggest that legal measures on e-waste management in communities should be specifically de-signed by implementing key environmental principles as a basis in determining formats and guidelines of e-waste management, especially participation of all sectors that can help in solving and reducing e-waste in communities that is harmful to health, sanitation, and environment.

Despite laws and directives for the regulation and restriction of pesticide in farming, the large use of Plant Protection Products (PPPs) in paddy fields is a relevant worldwide cause of contamination of the environment. The aim of this work is to evaluate the environmental impact due to the use of PPPs by using an integrated approach based on chemical analyses and ecotoxicological hazard assessment, supported by statistical tools, in order to overcome the issues related to the traditional tabular evaluation. Samples of soil and water of seven conventional and organic paddies located in Northern Italy have been examined for two years by extensive chemical and ecotoxicological analyses. The results evidenced a direct relationship between the presence of Oxadiazon in water and bioassays responses as the main cause of the toxicity measured. This phenomenon affected both biological and conventional rice fields, due to the free circulation of water through irrigation canals. Therefore, the implementation of organic districts with a water circulation isolated from conventional fields represents a simple and effective countermeasure to safeguard the agricultural practices of organic crops.

Urban floods are typical urban disasters that threaten the economy and development of cities. Sponge cities can improve the flood resistance ability and reduce the floods by setting low-impact development measures (LID). Evaluating the floods reduction benefits is the basic link in the construction of sponge cities. Therefore, it is of great significance to evaluate the benefits of sponge cities from the perspective of different rain patterns. In this study, we investigated the urban runoff of various rainfall patterns in Mianyang city using the Strom Water Management Model (SWMM). We employed 2–100-year return periods and three different temporal rainfall downscaling methods to evaluate rain patterns and simulate urban runoff in Mianyang, with and without the implementation of sponge city measures. After calibration, model performance was validated using multi-source data concerning flood peaks and inter-annual variations in flood magnitude. Notably, the effects of peak rainfall patterns on historical floods were generally greater than the effects of synthetic rainfalls generated by temporal downscaling. Compared to the rainfall patterns of historical flood events, the flood protection capacities of sponge cities tended to be overestimated when using the synthetic rainfall patterns generated by temporal downscaling. Overall, an earlier flood peak was associated with better flood sponge city protection capacity.

Background: The COVID-19 pandemic has hit the Spanish economy hard. The result is an unprecedented economic and social crisis due to uncertainty about the remedy, and due to the socio-economic effects on people’s lives. Methods: We performed a retrospective analysis of the macro-economic impact of COVID-19 in 2020, using the principal indicators of the Spanish economic and productive model. National statistics were examined in the search for impacts or anomalies occurring since the beginning of the pandemic. To estimate the strength of the impact on each of the indicators analysed, we used Bayesian structural time series. Results: In 2020, the cumulative impact on the Gross Domestic Product was of -11.41% [95% credible interval: -13.46; -9.29]. The indicator for Business Turnover fell by -9.37% [-12.71; -6.07]. The reduction in business activity was related to the sharp fall in demand. The Spanish employment market was strongly affected; our estimates showed a cumulative increase of 11.9% [4.27; 19.45] in the rate of unemployment during 2020. The autonomous communities which are economically the most heavily dependent on the services sector were those which recorded the worst indicators. Conclusions: Our estimates portray a dramatic situation in our country, and show all too clearly the fragility of a productive system which has to make the behavioural changes that are necessary to confront the COVID-19 pandemic.

In this study we mimic the unique, transparent protective carapace (shell) of myodocopid ostracods, through which their compound eyes see, to demonstrate that the carapace ultrastructure also provides functions of strength and protection for a relatively thin structure. The bulk ultrastructure of the transparent window in the carapace of the relatively large, pelagic cypridinid (Myodocopida) Macrocypridina castanea was mimicked using thin film deposition of dielectric materials to create a transparent, 15 bi-layer material. This biomimetic material was subjected to the natural forces withstood by the ostracod carapace in situ, including scratching by captured prey and strikes by water-borne particles. The biomimetic material was then tested in terms of its extrinsic (hardness value) and intrinsic (elastic modulus) response to indentation along with its scratch resistance. The performance of the biomimetic material was compared with that of a commonly used, anti-scratch resistant lens and polycarbonate that is typically used in the field of transparent armoury. The biomimetic material showed the best scratch resistant performance, and significantly greater hardness and elastic modulus values. The ability of biomimetic material to revert back to its original form (post loading), along with its scratch resistant qualities, offers potential for a biomimetic eye protection coating that could enhance material currently in use.

The COVID-19 pandemic of 2020 changed the way we interact and engage in commerce at a fundamental level. Social distancing and stay-at-home orders leave businesses and cities wondering what economic activity will look like in the future. Given a likely reduction in face-to-face interactions, it is important to better understand how social interactivity influences economic outcomes. Here we measure the effect of social interactions in the workforce on patent production and economic efficiency. We decompose U.S. occupations into individual work activities, determine which of those activities are associated with face-to-face interactions, and reaggregate the labor force of each U.S. metropolitan statistical area (MSA) into a metric of social interactiveness. We then calculate each MSA’s density of social work activities and find that this measure is more highly correlated with an MSA’s per capita patent production than simple population density. This suggests that density of face-to-face interactions is the important driver of a city’s rate of invention. We close by exploring analogies between the development of cities and the development of stars, suggesting ways these analogies may help frame future research on cities.

This article is devoted to discussing the famous Impact factor citation suited to indicate the published scientific result's significance. Considering this problem based on the available statistical data, we demonstrate that: Impact factor follows a distribution having a heavy power tail that may lead to inconsistency in scientifically comparable journals' evaluation. Further, we remark that many papers recognized as sleeping and seemingly sleeping beauties are not considered when calculating. This makes the impact factor unsuitable in evaluating the original, groundbreaking discoveries and their consequences. Due to permanent changes in the composition of the underlying datasets, the impact factor can not be considered as a reliable indicator and to be used as a consistent evaluation metric. Overall, discussing all represented impact factor obstacles and other appropriate considerations, we conclude that the considered index can hardly be used as a reliable estimator of the publication's significance.

Investments in digital infrastructure in marginalised communities are set to increase in the next decade. These are premised on the potential of digital technologies to contribute towards solving societal problems, including the fragility of food value chains in rural areas. Although there are mixed empirical findings on the impact of these digital infrastructure investments, huge investments are continuing amid changing ICT policies in most developing countries. This paper, using a case study of a local livestock value chain in a rural community in Zimbabwe, argues for the application of non-conventional approaches towards digital infrastructure transformation impact assessment. Using selected theories and frameworks (socio-ecological systems framework, choice framework and technology affordances theory) as well as empirical data from a project in a rural community, the paper shows that real-time impact assessment using context-specific metrics may reveal hidden digital infrastructure transformation impacts, positive and negative, that are often overlooked when traditional impact assessment approaches are employed. The findings of this study contribute towards improving approaches towards ICT impact assessment. Practitioners engaging in impact assessment are challenged to move beyond dependence on traditional metrics (e.g. access) to the adoption of participatory processes to decipher context-appropriate metrics.

In Bangladesh, microcredit program has been in function for almost half a century. Though popularly termed as a tool for poverty alleviation and women empowerment, criticism about microcredit program’s actual effectiveness isn’t new. This study attempts to evaluate the impact of such programs by measuring borrowers’ social mobility. Using a multidimensional approach, indicators like household income, economic susceptibility, living conditions, consumption pattern, children’s education, healthcare facilities, women’s participation in decision-making were taken into account for measurement. Quantitative method was used. Based on a non-probability sampling, 107 microcredit borrowers were selected for conducting interview schedules who live in a rural, a semi-urban and an urban area. Statistical analysis of data reveals that those who have been taking loans for several number of years have all managed to increase their income level to a variety of extent, but only those have gained some sort of mobility who have been taking loans for more than 4-5 years and have taken 5 times or more. Few of them have actually moved from microcredit to become a microfinance client by taking bigger amount of loans and having savings. Positive responses about the indicators being used in the study were found among the handful of those who have mobilized significantly. In true sense, most of the borrowers are stuck at the bottom end of socio-economic ladder and are struggling to manage a better living standard.

The pandemic caused by SARS-CoV-2 virus obstructed the Chinese economy and has expanded to the rest of the world at a rapid pace affecting at least 215 countries, areas and territories. The advancement of the disease and its economic repercussions is profoundly ambiguous, making it challenging for policymakers to formulate suitable microeconomic and macroeconomic policy responses. The scenarios in this paper illustrate how an outbreak could significantly affect the global economy in the short run. It has been estimated that each additional month of crisis would cost from about 2.5-3% of the global GDP and that the GDP growth would take a blow, reaching about 3-6%, depending on the country. Scenarios also suggest that GDP can drop by more than 10% and even exceed 15% in some countries. Via addressing the economic consequence of COVID-19 in different industries and countries, the paper presents assessments of the likely global economic costs of COVID-19 and the GDP growth of different countries. Economies will be negatively affected because of the high number of jobs at risk. Countries highly dependent on foreign trade are more negatively affected. Given that disease and its economic influence are highly unpredictable in numerous aspects, the global economy at the moment is the most critically threatened in history.

This study evaluates various safety aspects of standardized impacts that cyclists may suffer while wearing a bicycle helmet, by combining a partially validated finite element model of the cranio-cervical region and a newly developed bicycle helmet model. Under EN 1078 standardized impact conditions, the results of simulated impact tests show that the helmet can absorb 40% to 50 % of the total impact energy at impact velocities above 4 m/s. Further, based on a relationship between Head Injury Criterion and the risk of injury from field data, the results of the simulations suggest that minor injuries may occur at impact velocities of 10 km/h, serious injuries at 15 km/h, and severe injuries at 20 km/h. Fatal injuries will likely occur at impact velocities of 30 km/h and higher.

A framework of similarity laws, termed oriented-density-length-velocity (ODLV) framework, is suggested for the geometric distorted structures subjected to impact loading. The distinct feature of this framework is that the newly proposed oriented dimensions, dimensionless numbers and scaling factors for physical quantity are explicitly expressed by the characteristic lengths of three spatial directions, which overcome the inherent defects that traditional scalar dimensional analysis could not express the effects of structural geometric characteristics and spatial directions for similarity. The non-scalabilities of geometrical distortion as well as other distortions such as different materials and gravity could be compensated by the reasonable correction for the impact velocity, the geometrical thickness and the density, when the proposed dimensionless number of equivalent stress is used between scaled model and prototype. Three analytical models of beam, plate and shell subjected to impact mass or impulsive velocity are verified by equation analysis. And a numerical model of circular plate subjected to dynamic pressure pulse is verified in more detail, form the view of point of space deformation, deformation history and the components of displacement, strain and stress. The results show that the proposed dimensionless numbers have attractively perfect ability to express the dimensionless response equations of displacement, angle, time, strain and strain rate. When the proposed dimensionless numbers are used to regularize impact models, the structural responses of the geometrically distorted scaled models can behave the completely identical behaviors with those of the prototype on space and time —not only for the direction-independent equivalent stress, strain and strain rate but also for the direction-dependent displacement, stress and strain components.

The article focuses on mining of non-energy mineral resources with minimum environmental impacts. It issues from research results of a project Competence Centre for Effective and Ecological Mining of Mineral Resources implemented at the Faculty of Mining and Geology at VŠB-Technical University of Ostrava, Czech Geological Survey, a company Watrad ltd., a state enterprise Diamo, a company RPS Ostrava plc and a company Sedlecký kaolin plc. The paper starts with a partial analysis of the existing legal norms related to mining and processing of mineral resources. Next, it analyses mineral resource mining options free of negative environmental impacts. The fundamental tool to assess potential environmental impacts of mining is the implementation of Environmental Impact Assessment (EIA) process for a given mineral resource. In the Czech Republic environmental impact assessment is carried out by course of Act 100/2001 Coll. Its important amendment is Act 39/2015 Coll. claiming, inter alia, that the environmental impact assessment is rigidly connected with other permits and procedures, such as the zoning process and building construction permits. The article describes the environmental impacts of mining of non-energy mineral resources, including the following factors: appropriation of land, impacts on surface water, ground water and soil, noise, influence on the landscape character, and air pollution. The paper also includes a case study summarizing information on the environmental factors that may play a role in potential underground mining of graphite in the deposit Český Krumlov - Městský Vrch and the deposit Lazec - Křenov.

Background/Objectives: The Perilla frutescens plant has historically been used to protect against inflammation and redox stress. This has been attributed in part to the high content of various polyphenols. Despite this, the complement of polyphenolic components in Perilla extract is not yet fully defined. The aim of this study was to characterise the polyphenolic composition in Perilla extract, and its effect on the transcription factor nuclear factor erythroid 2-related factor 2 (Nrf2), which during inflammation and oxidative stress binds to the antioxidant response element (ARE) found on the promoter of phase II antioxidant enzymes. Methods: Following extraction using four solvents of different properties, the total phenolic, flavonoid and ortho-diphenolic content of Perilla extract were determined. Individual phenolic compounds were identified and quantified by RP-HPLC. Dual Luciferase assay using a reporter plasmid containing a human NQO1 ARE-luciferase fusion was employed to determine the potential protective effect of the Perilla fractions against redox stress. Results: HPLC analysis revealed that the highest phenolic content was present in the polar extracts. A total of 35 distinct polyphenolic compounds were identified, with rosmarinic acid being the major constituent. On cells in vitro, the methanol Perilla fraction showed protection against redox stress, with the luciferase assay displaying up to 1.5 fold increase in the induction of the human NQO1 ARE-luciferase reporter. Conclusions: While Perilla extract seems to be mainly protecting against inflammation and redox stress through the action of rosmarinic acid, further work is required on the synergystic effects between different polyphenols.

Background: Liver failure profoundly affects the immune system, leading to dysregulation of innate and adaptive immune responses. Body: This review explores the intricate relationship between liver function and immune homeostasis. The role of the liver as a central hub in immune response initiation is elucidated, emphasizing its involvement in hepatic inflammation induction and subsequent systemic inflammation. Cytokines, chemokines, growth factors, and lipid mediators orchestrate these immune processes, serving as both prognostic biomarkers and potential therapeutic targets in liver failure-associated immune dysregulation. Furthermore, the review delves into the mechanisms underlying immunosuppression in liver failure, encompassing alterations in innate immune cell functions such as neutrophils, macrophages, and natural killer cells (NK cells), as well as perturbations in adaptive immune responses mediated by B and T cells. Conclusion: Understanding the immunological consequences of liver failure is crucial for developing targeted therapeutic interventions and improving patient outcomes in liver disease management.

In mountain-gorge areas, the rock creep is the critical process for high rock slopes failure. During long-term rock creep, slopes might encounter earthquakes and form further creep after earthquakes. This complex mechanical response process can easily lead to the slope failure. Based on a high rock slope in the Nujiang River Basin, this paper analyzes deformation characteristics and dynamic response characteristics by using FLAC3D software, considering combined effects of multiple earthquakes and long-term creep. Results show that when the amplitude increases, the shear strength of the slope decreases and the risk of instability increases under combined actions of creep and earthquakes. Earthquakes promote the development of creep and induce the accumulation of damage on the slope surface and in the slope. The delayed effect becomes more pronounced as the slope height increases. We need to consider deformation differences of the slope further. The ground motion response on the slope surface is stronger than those in the slope, with the peak occurring at the top of the slope. Earthquakes have a greater impact on the middle and top of the slope surface, where cumulative damage and crack development begin. Reinforcement should be considered in these two places. Vertical earthquake has a great effect on the dynamic response. The phenomenon of slope resonance leads to a larger MPGA in the vertical direction than in the horizontal direction. Nonlinear and damping characteristics of the slope and the frequency of seismic waves cause the MPGA to decrease with the increase of amplitudes. This study could promote the development of high rock slope failure mechanism and provide references for the prevention of landslides in the Nujiang River Basin.

Cranioplasty (CP) is the main surgical procedure aimed at reproducing a structural or morphological defect of the skull. It has been shown that cranioplasty can be useful for patients with traumatic brain injury (TBI) to achieve functional cognitive and motor improvements. Here, we describe a patient with long-term severe TBI who recovered consciousness following delayed CP. We found that a delayed CP may result in a meaningful functional recovery with emergence from a minimally conscious state and recovery of functional communication, even more than a year after decompressive craniectomy. Delayed intervention is equally successful in promoting functional recovery in long-term TBI patients, as early CP has already shown.

We propose a theoretical method for the deterministic shaping of quantum light via photon number state selective interactions. Nonclassical states of light are an essential resource for high precision optical techniques that rely on photon correlations and noise reshaping. Notable techniques include quantum enhanced interferometry, ghost imaging, and generating fault tolerant codes for continuous variable optical quantum computing. We show that a class of nonlinear-optical resonators can transform many-photon wavefunctions to produce structured states of light with nonclassical noise statistics. The devices, based on parametric down conversion, utilize the Kerr effect to tune photon number dependent frequency matching, inducing photon number selective interactions. With a high amplitude coherent pump, the number selective interaction shapes the noise of a two-mode squeezed cavity state with minimal dephasing, illustrated with simulations. We specify the requisite material properties to build the device and highlight the remaining material degrees of freedom which offer flexible material design.

Modern development of high-intensity and high-resolution X-ray technology allows detailed studies of the multiphoton absorption and scattering of X-ray photons by deep and subvalent shells of molecular systems on a wide energy range. The interpretation of experimental data requires the improvement of computational methods for obtaining excited and ionized electron states of molecular systems with one or several vacancies. The specificity of solving these problems requires the use of molecular orbitals obtained in one-center representation. Slow convergence of one-center expansions is a significant disadvantage of this approach; it affects the accuracy of the calculation of spectroscopic quantities. We offer a method of including higher harmonics in one-center expansion of a molecular orbital with the use of wave functions of electrons of deep shells of a ligand (off-center atom of a molecule). The method allows one to take into account correctly electron density of a linear molecule near the ligand when describing vacancies created in a molecular core leading to radial relaxation of electron density. The analysis of the parameters of one-center expansion of the ligand functions depending on ligand’s charge is performed. The criteria for the inclusion of higher harmonics of one-center decomposition of the ligand functions in the molecular orbital are determined. The efficiency of the method is demonstrated by the example of diatomic molecules HF, LiF, and BF by estimating energy characteristics of their ground and ionized states.

In today's digital landscape, cybersecurity has become a priority, with attacks becoming increasingly sophisticated. Traditional security approaches are no longer enough, requiring a more dynamic and advanced response. In this context, integrating Artificial Intelligence (AI) and Machine Learning (ML) appears key to addressing this growing threat. However, despite their high effectiveness, there is a developed problem: the integration of various data sources and technologies for comprehensive protection. This article presents an in-depth review of integrating Artificial Intelligence and Machine Learning in cybersecurity, focusing particularly on Open Extended Detection and Response (Open XDR) technology. The literature review in this article was meticulously conducted with specific criteria in mind. It focused on sourcing peer-reviewed journals, authoritative cybersecurity publications, and recent conferences that primarily concentrate on the advancements in AI and ML within the cybersecurity domain, particularly from 2018 to 2023. This timeframe was chosen to ensure the inclusion of the most current and relevant developments in Open XDR technology, Intrusion Detection Systems, Endpoint Detection and Response, and Security Information and Event Management systems. Additionally, the review gave special attention to studies and reports highlighting practical implementations and real-world applications of these technologies, thereby ensuring a comprehensive understanding of their impact and effectiveness in enhancing cybersecurity resilience. The methodology used is a detailed literature review, examining how various cybersecurity components interact and function. These components include Intrusion Detection Systems (IDS), which monitor networks for malicious activities; Endpoint Detection and Response (EDR), which focuses on detecting and investigating security incidents on endpoints; and Security Information and Event Management (SIEM), systems that provide real-time analysis of security alerts. The review also considers the role of Active Directory, a directory service for Windows domain networks, and the process of log forwarding, where log files are transmitted to a central server for analysis, in the context of AI and ML. The paper delves into the development of AI and ML, underscoring their roles in cybersecurity for advanced data processing, pattern recognition, and predicting threats. It explores both supervised (where the model is trained on labeled data) and unsupervised learning (where the model learns from unlabeled data) in ML, and how these techniques bolster cybersecurity measures. The article highlights the significance of Open XDR as a critical innovation that integrates data from multiple sources for comprehensive security analysis. Further, the review discusses how the integration of AI and ML into various cybersecurity tools, such as IDS, EDR, and SIEM, augments capabilities in threat detection and response. It addresses the challenges and opportunities that AI and ML present in the cybersecurity domain, focusing on ethical issues, data privacy concerns, and the necessity for ongoing professional development in this rapidly advancing field. The paper concludes by affirming the effectiveness of merging AI and ML with these cybersecurity tools within the Open XDR framework.

This paper offers a novel geometric and visual approach to the renowned Four Color Map Theorem and K5 non-planarity problem while unveiling their profound connection to the "kissing number" problem in 2D. We represent planar graphs through circles and tangents, simplifying complex structures and shedding light on these classic problems. Our proofs by contradiction, rooted in the kissing number concept, reveal that both the Four Color Map Theorem and K5 non-planarity are fundamentally linked, as they pivot around the concept of coloring. This study bridges the realms of geometry and graph theory, providing fresh insights and emphasizing the significance of the kissing number problem in various fields.

In order to further control the equivalent circulating density,a new type of annular pres-sure-reducing downhole tool for high temperature and high pressure wells-liquid-absorbing ECD tool is designed.Through this tool,the bottom hole pressure of the equivalent circulating drilling fluid can be close to its hydrostatic pres-sure,therebyachieving a deeper drilling depth.The tool is mainly composed of screw mo-tor,vortex blade,annular seal,universal joint and drill string.Its working principle is mainly to use the liquid absorption effect of the tool and the hydraulic energy of the circu-lating fluid extracted by the screw motor to convert it into mechanical energy,and to gen-erate suction force to improve the flow energy of the drilling fluid in the bottom hole an-nulusand reduce the equivalent circulation density.Based on ANSYS-FLUENT analysis andsimulation,the change of pressure drop characteristics under different drilling fluid density,displacement and tool size was simulated.The simulation results show that thedepressurization effect is 1.0MPa when the drilling fluid density is 1.2g/cm3. When the drilling fluid density is 1.5g/cm3,the depressurization is about 1.7MPa,and when thedrill-ing fluid density is 1.8g/cm3,the depressurization is about 1.9MPa.When the drilling fluid density is 2.0g/cm3,the pressure drop is about 2.3MPa.When the flow rate is from 1500-2500L/min,the maximum pressure can be reduced by 2.3MPa.When the viscosity is 40mPa•S and 60mPa•S,the pressure drop almost does not change.The increase of viscosi-ty has little effect on the pressure drop,and it is mainly affected by the flow rate under equal displacement.

Pancreatic cancer (PC) has a poor prognosis and displays resistance to immunotherapy. A better understanding of tumor-derived extracellular vesicles (EVs) effects on immune responses might contribute to improved immunotherapy. EVs derived from Capan-2 and BxPC-3 PC cells isolated by ultracentrifugation were characterized by atomic force microscopy, western blot (WB), nanoparticle tracking analysis and label-free proteomics. Fresh PBMCs from healthy donors were treated with PC- or control-derived heterologous EVs followed by flow cytometry analysis of CD8+ and CD4+ lymphocytes. Proteomics of lymphocytes sorted from EV-treated, or -untreated PBMCs was performed and IFN-γ concentration was measured by ELISA. Notably, most of the proteins identified in Capan-2 and BxPC-3 EVs by proteomic analysis were connected in a single functional network (p=1x10-16) and were involved in “Immune System” (FDR: 1.10x10-24 and 3.69x10-19, respectively). Interestingly, treatment of healthy donor-derived PBMCs with Capan-2 EVs, but not with BxPC-3 EVs or heterologous control EVs induced early activation of CD8+ and CD4+ lymphocytes. Proteomics of lymphocytes sorted from EV-treated PBMCs was consistent with their activation by Capan-2 EVs, indicating IFN-γ among major upstream regulators, as confirmed by ELISA. Proteomic and functional analyses indicate that PC-EVs have pleiotropic effects, and some may activate early immune response, which might be relevant for the development of highly needed immunotherapeutic strategies in this immune-cold tumor.

For marine vessels, a propeller shaft system, also known as a propulsion shaft system, is an essential changer in engine torque and propeller thrust. The propeller shaft system is subjected to transverse, longitudinal, and torsional excitations during operation. These sources of excitations originate from alternating thrust generated by the propeller, operation of a propeller in a stern flow field which is non-uniform in time and space, misalignment of components such as shafts, bearings, and keyholes in the assembly, excitations in the form of rotational motion, and the whirling motion of the shafts. These dynamic excitations posed a challenging issue for the integrity and reliability of a marine vehicle. Thus, it is crucial to analyze the dynamic response of the propulsion shaft system. The dynamic analysis of the propulsion shaft system is typically conducted using numerical /analytical models. At present, Finite Element Model (FEM) as a numerical model plays a vital role in analyzing the dynamic response of the structure. The computed response and the modal parameters from the FE model are reliable only if accurate boundary conditions, such as stiffness, can be imposed on the model. However, the numerical FE model deviates from the experimental results because of uncertainties in the stiffness values of the bearings and other connectors. This paper uses the Response Surface Optimization (RSO) technique to estimate the unknown stiffness of the bearings used in the propulsion shaft system. The experimental model of the propeller shaft system is constructed from the steady-state response of the system using the step sine excitation. The natural frequencies and the amplitude of vibrations in the FE model are updated using the parametric RSO technique. The updated model shows that the difference in natural frequencies and vibration amplitude is less than 10% between the optimized and experimental models. Propeller Shaft, Vibrations, Optimization, Response Surface

The recent outbreak of Nipah virus in India in 2023 had affected the Kozhikode district in Kerala, with a total of 6 confirmed cases and 2 deaths. The source of the outbreak was traced to fruit bats that contaminated date palm sap, a common drink in the region. The outbreak was contained by rapid detection, isolation, and contact tracing of the cases, as well as public health education and social distancing measures. It also highlighted the need for improved surveillance, diagnostics, and therapeutics for Nipah virus. This letter highlights the latest insights gained from the epidemiological, clinical, and laboratory investigations of the outbreak.

COVID-19 pandemic outbreak challenged the global public health in last couple of years. Throughout the pandemic period, numbers of mutant strains of SARS- CoV-2 created challenges for the infected patients with diverse pathophysiology and immune response. Variant of Concern (VOC) alpha (B.1.1.7), delta (B.1.617.2) and omicron (B.1.1.529) grew most notable for causing the epidemiological manifestations, which eventually caused elevated infectivity resulting in significant mortality. This review indicates the comparative analysis of the immune-pathophysiological mechanisms in respect to the aforementioned strains of SARS-CoV-2.

Salmonella is the intracellular pathogen and etiological known for the cause of asymptomatic carriage, gastroenteritis, systemic disease (typhoid fever), in severe cases death may also occur. Altered function of mitochondria due to Salmonella infection impacts the immune response. Mitochondria which are recognized as the “powerhouse” of the cells are also know to play central role in the immune metabolism. Mitochondrial dynamics such as fusion, fission, signaling, transport and mitophagy influences the immune system and also maintains the cellular integrity. Mitochondrial DNA and Reactive oxygen species formation also elicits the inflammatory responses. This review discusses the immune metabolism and effect of altered mitochondrial dynamics in case of Salmonella infection.

The influence of four levels of dietary supplementation on the development of the immune response and on the biology of Haemonchus contortus and Trichostrongylus colubriformis was evaluated in Dorper lambs under serial artificial mixed-infections with 1000 infective larvae (L3) of each species, given every three days for 12 weeks. For each of the four diets formulated, one infected group (n=7) and one control group (n=4) were set up. Diets 1, 2, 3 and 4 contained 0%, 25%, 50% and 75% of concentrate, respectively. There was an evident immune response to infection in all groups, manifested through eosinophilia and production of anti-L3 immunoglobulins. There was a significant inverse relationship between the levels of nutrients in the diets and the numbers of late fourth-stage larvae, early fifth-stage larvae and adults of H. contortus. Most of the H. contortus parasite population was in hypobiosis at the early-fourth stage, representing 59.5%, 75.8%, 83.3% and 86.3% of the total Haemonchus worm burden, respectively, in the Diets 1, 2, 3 and 4. In the case of T. colubriformis, hypobiosis was not observed and the diet had no influence on establishment of the parasite.

Salvia hispanica (chia) is a highly nutritious food source and has gained popularity due to its high omega-3 fatty acid content. Red spider mites are a serious problem in the production of S. hispanica. However, no study has been conducted to analyse the defensive response to the infestation of red spider mites in S. hispanica. To elucidate the molecular mechanisms of the defensive response of S. hispanica to red spider mites, we performed a transcriptomic analysis of S. hispanica when infested by red spider mites. In the comparative assessment of leaf transcriptomes, a total of 1743 differentially expressed genes (DEGs) were identified between control and mite-infested S. hispanica. From these, 1208 (69%) transcripts were up-regulated and 535 (31%) were down-regulated. The DEGs included transcription factors, defense hormones, and secondary metabolites that were either suppressed or activated in response to spider mite herbivory. Gene Ontology (GO) enrichment analysis revealed that plant secondary metabolites such as glucosinolates, and signalling pathways, including the jasmonic acid signalling pathway, may play an important role in the defence against red spider mites. This study provides novel insights into the defence response of S. hispanica in response to insect herbivory and could be a resource for the improvement of pest resistance in the chia.

In Μay 2022, for the first time, multiple cases of mpox were reported in several non-endemic countries. The first ever case of the disease in Greece was confirmed on 8 June 2022 and a total of 88 cases were reported in the country until the end of April 2023. A multidisciplinary response team was established by the Greek National Public Health Organization (EODY) to monitor and manage the situation. EODY’s emergency response focused on enhanced surveillance, laboratory testing, contact tracing, medical countermeasures, and education of health care providers and the public. Even though management of cases was considered successful and the risk from the disease was down-graded, sporadic cases continue to occur. Here, we provide epidemiological and laboratory features of the reported cases to depict the course of the disease notification rate, that suggests measures for raising awareness as well as vaccination of high-risk groups of the population should be continued.

One of the significant challenges today in the brain-machine interface using invasive methods is the stability of the chronic record. In recent years, polymer-based electrodes have gained notoriety for achieving mechanical strength values close to that of brain tissue, promoting a lower immune response to the implant. In this work, we fabricated fully polymeric electrodes based on PEDOT:PSS for neural recording in Wistar rats. We characterized the electrical properties and both in-vitro and in-vivo functionality of the electrodes. Also, we employed histological processing and microscopical visualization to evaluate tecidual immune response in 7, 14, and 21 days post-implant days. Electrodes with 400-micrometer channels showed a 12dB signal-to-noise ratio. Local field potentials were characterized under two conditions: anesthetized and free-moving. There was a proliferation of microglia to the tissue-electrode interface in the first days, with a decrease after 14 days. Astrocytes also migrated to the interface, but there was no continuous recruitment of these cells in the tissue, showing inflammatory stability at 21 days. The signal was not affected by this inflammatory action, demonstrating that fully polymeric electrodes can be an alternative to prolong the valuable time of neural recordings.

Bunyaviruses represent the largest group of RNA viruses, and are the causative agent of a variety of febrile and hemorrhagic illnesses. Originally characterized as a single serotype in Africa, the number of described bunyaviruses now exceeds over 500, with its presence detected around the world. These predominantly tri-segmented, single-stranded RNA viruses are transmitted primarily through arthropod and rodent vectors, and can infect a wide variety of animal and plants. Although encoding for a small number of proteins, these viruses can inflict potentially fatal disease outcomes, and have even developed strategies to suppress the innate antiviral immune mechanisms of the infected host. This short review will attempt to provide an overall description of the order Bunyavirales, describing the mechanisms behind their infection, replication and their evasion of the host immune response. Furthermore, the historical context of these virus will be presented, starting from their original discovery almost 80 years ago, to the most recent research pertaining to viral replication and host immune response.

Deaths and property damage from the flood have increased drastically in the past two decades due to various reasons such as increased population, unplanned development and climate change. Losses from floods can be reduced by having accurate intelligence of an emerging flood situation in order to make timely decisions for issuing early warnings and responding efficiently. This paper presents a thorough analysis of the types and sources of intelligence required for flood warning and response processes and technology solutions that can be used for capturing such intelligence. A structured review, covering a more comprehensive range of published literature on Flood Early Warning and Response Systems (FEWRS), was conducted to identify the necessary intelligence and the technology that can be used to capture intelligence required for various phases of a flood hazard as it develops. Twenty-seven different types of key intelligence required in the flood cycle were identified. A conceptual architecture was identified that illustrates how relevant technology solutions can be used to extract intelligence at various stages of a flood event for decision making for early warnings and response.

Background: We aimed to identify overexpressed genes or related pathways associated with good responses to anti-HER2 therapy and to suggest a model for predicting drug response in neoadjuvant therapy with trastuzumab in HER2-positive breast cancer patients. Methods: We recruited 64 women with breast cancer and categorized them into three groups according to anti-HER2 therapy response. RNA from twenty core needle biopsy paraffin-embedded tissues and four cultured cell was extracted, reverse transcribed, and subjected to microarray. The obtained data were analyzed using Gene Ontology, Kyoto Encyclopedia of Genes and Genomes, and database for annotation, visualization, and integrated discovery. Results: In total, 6,656 genes differentially expressed between trastuzumab-susceptible and trastuzumab-resistant cell lines (3,224 upregulated and 3,432 downregulated). Expression changes in 34 genes in several pathways were found to be related to the response to trastuzumab-containing treatment, interfering with adhesion to other cells or tissues (focal adhesion) and regulating extracellular matrix interactions and phagosome action. Thus, decreased tumor invasiveness and enhanced drug effects might be the mechanisms explaining the better drug response in complete response group. Conclusions: This multigene assay-based study provides insights into breast cancer signal transduction and the possible prediction of treatment response to targeted therapies such as trastuzumab.

Molecular iodine (I2) induces apoptotic, antiangiogenic, and antiproliferative effects in breast cancer cells. Little is known about its effects on the tumor immune microenvironment. We studied the effect of oral (5 mg/day) I2 supplementation alone (I2) or together with conventional chemotherapy (Cht+I2) on the im-mune component of breast cancer tumors from a previously published pilot study conducted in Mexico. RNA-seq, I2 and Cht+I2 samples showed significant increases in expression of Th1 and Th17 pathways. Tumor immune composition determined by deconvolution analysis revealed significant increases in M0 macrophages and B lymphocytes in both I2 groups. Real-time RT-PCR showed that I2 tumors overexpress T-BET (p = 0.019) and interferon-gamma (IFNγ; p = 0.020) and silence tumor growth factor-beta (TGFβ; p = 0.049); whereas in Cht+I2 tumors, GATA3 is silenced (p = 0.014). Preliminary methylation analysis shows that I2 activates IFNγ gene promoter (by increasing its unmethylated form) and silences TGFβ in Cht+I2. In conclusion, our data showed that I2 supplements induce the activation of the immune response and that when combined with Cht, the Th1 pathways are stimulated. The molecular mechanisms involved in these responses are being analyzed, but preliminary data suggest that methylation/demethylation mechanisms could also participate.

A highly efficient reduction process of Cr (VI) with biochar was conducted in this paper. The results showed that nearly 100% Cr (VI) was reduced at selected reaction conditions: the dosage of biochar at m (C)/m(Cr) = 3.0, reaction temperature of 90 ℃, reaction time at 60 min and concentration of H2SO4 of 20 g/L, respectively. The reduction kinetics analysis demonstrated that the reduction of Cr (VI) fitted well with the pseudo-first-order model and the apparent activation energy was calculated to 40.24 kJ/mol. Response surface methodology confirmed that all the experimental parameters had positive effect on the reduction of Cr (VI). The influence of each parameter on the reduction process followed the order: dosage of biochar> Concentration of H2SO4 > Reaction Temperature > Reaction Time. This paper provided a versatile strategy for treatment of wastewater containing Cr (VI) and showed a bright tomorrow for wastewater treatment.

Purpose: This study aimed to determine the efficacy and safety of Oncoxin as an antitumoral supplement, and to describe its mechanism of action. Methods: We performed this scoping review according to the recommendations of the Joanna Briggs Institute and included patients older than 18 years-old who have any kind of tumor and receive Oncoxin as a supplement. We focused on the efficacy in terms of antitumoral properties, quality of life and survival, safety in terms of adverse events, and the mechanism of action. We did not limit for language or setting. We searched MEDLINE (Pubmed), EMBASE (Scopus), LILACS, and the Cochrane Central Register of Controlled Trials (CENTRAL) from inception to nowadays. Results: We found a promising increment of survival when taking Oncoxin as a supplementary treatment. Additionally, the quality of life increased in terms of Karnofsky and EORTC scales. Regarding the mechanism of action, studies suggest it modifies inflammatory mediators’ expression, as evidenced by the reduction of COX-2, IL-1β, IL-6, TNF-α, IL-1β, IL-12, and IFN-γ. Besides, it promotes an arrest in the progression of cells from G1 into S, along with an increase in p27 and a decrease in cyclin D1 and pRb. Conclusions: We found promising complementary effects of Oncoxin to the standard treatment of cancer patients in diverse scenarios, with putative robust mechanisms of action. In addition to clinically relevant impacts verified in clinical trials, as well as it decreases the levels of pro-inflammatory cytokines, it can also decrease cytokines with antitumor activity such as IFN-γ, which should be further explored in larger trials and the long term.

Background: The COVID-19 has put global health institutions on alert. Organizations such as the CDC and WHO have developed preparedness and prevention checklist of 2019-nCoV infection to be used by public and healthcare professionals. Since COVID 19 pandemic is unexpected and no country aware of it prior to outbreak, there is limited information on the overall preparations of healthcare providers in Ethiopia. Therefore, the aim of this study was to assess early healthcare professionals’ preparedness and response to COVID 19 Pandemic in Oromia regional state, Ethiopia. Methods: The study was conducted on healthcare professionals working in public hospitals of Oromia regional state. The study was carried out by online questionnaire prepared using SurveyMonkey©. The collected data was analyzed and One-way ANOVA was used to determine the significant differences between health professionals working in different hospitals. The statistical significance associations of variables of interest was determined at 95% confidence intervals. Results: Healthcare professionals in the public hospitals of Oromia regional state, Ethiopia perceived that they are not yet well prepared and may not respond to the pandemic quickly and efficiently. Even though, they have positive response towards identifying signs and symptoms, provide education and utilization of PPE, they are still lacking in practical responses like managing cases, implementing emergency plans and isolation procedures from many others. Conclusion: As the Federal Ministry of Health, Ethiopia Public health institute and Oromia health bureau are vigilant and continually conducting preventive measures programs, extensive and maximum effort should be done to improve healthcare providers’ preparedness and response towards any emergency related to COVID-19 pandemic.

Optical conductivity of an interacting polaron gas is calculated within an extended random phase approximation which takes into account mixing of collective excitations of the electron gas with LO phonons. This mixing is important for the optical response of strongly polar crystals where the static dielectric constant is rather high, as in the case of strontium titanate. The present calculation sheds light on unexplained features of experimentally observed optical conductivity spectra in $n$-doped SrTiO$_{3}$. These features appear to be due to dynamic screening of the electron-electron interaction by polar optical phonons and hence do not require additional mechanisms for their explanation.

Adenosine to inosine (A-to-I) RNA editing is a highly conserved regulatory process carried out by adenosine-deaminases (ADARs) on dsRNAs. Although a considerable fraction of the transcriptome is edited, the function of most editing sites is unknown. Previous studies indicate changes in A-to-I RNA editing frequencies following exposure to several stress types. However, the overall effect of stress on the expression of ADAR targets is not fully understood. Here, we performed high-throughput RNA sequencing of wild-type and ADAR mutant C. elegans worms after heat-shock to analyze the effect of heat-shock stress on the expression pattern of genes. We found that ADAR regulation following heat-shock does not directly involve heat-shock related genes. Our analysis also revealed that lncRNAs and pseudogenes, which have a tendency for secondary RNA structures, are enriched among upregulated genes following heat-shock in ADAR mutant worms. The same group of genes is downregulated in ADAR mutant worms under permissive conditions, which is likely, considering that A-to-I editing protects endogenous dsRNA from RNA-interference (RNAi). Therefore, temperature increases may destabilize dsRNA structures and protect them from RNAi degradation, despite the lack of ADAR function. These findings shed new light on the dynamics of gene expression under heat-shock in relation to ADAR function.

The response of plasmonic metal particles to an electromagnetic wave undergoes significant features at the nanoscale level. Different properties of the internal composition of a metal, such as its ionic background and the free electron gas, begin to manifest more prominently. As the dimensions of the nanostructures decrease, the classical local theory gradually becomes inadequate. Therefore, Maxwellʹs equations need to be supplemented with a relationship determining the dynamics of current density which is the essence of nonlocal plasmonic models. In this field of physics, the standard (linearized) hydrodynamic model (HDM) has been widely adopted with great success, serving as the basis for a variety of simulation methods. However, ongoing efforts are also being made to expand and refine it. Recently, the GNOR (general nonlocal optical response) modification of the HDM has been used, with the intention of incorporating the influence of electron gas diffusion. Clearly, from the classical description of fluid dynamics, a close relationship between viscosive damping and diffusion arises. This offers a relevant motivation for introducing the GNOR modification in an alternative manner. The standard HDM and its existing GNOR modification also do not include the influence of interband electron transitions in the conduction band and other phenomena that are part of many refining modifications of the Drude‐Lorentz and other models of metal permittivity. In this article, we present a modified version of GNOR‐HDM that incorporates the viscosive damping of the electron gas and a generalized Drude‐Lorentz term. In the selected simulations, we also introduce Landau damping which corrects the magnitude of the standard damping constant of the electron gas based on the size of the nanoparticle. We have chosen a spherical particle as a suitable object for testing and comparing HD models and their modifications because it allows finding precise analytical solutions for the interaction and, simultaneously, it is a relatively easily fabricable nanostructure in practice. Our contribution also includes our own analytical method for solving the HDM interaction of a plane wave with a spherical particle. This method forms the core of calculations of the characteristic quantities, such as the extinction cross‐sections and the corresponding components of electric fields and current densities.

The finite volume method (FVM) is a kind of numerical analysis method that can take into account topography and apply local subdivision cells as the finite element method (FEM). The adjoint state method (ASM) can easily calculate the gradient vector of the objective function for the inversion. The author developed a program that applied these methods to 3-D Magnetotelluric (MT) inversion and verified it using test models. As a result, it was confirmed that the program can perform analysis properly and efficiently considering topography and subsurface resistivity heterogeneity.

A framework for analysis that focusses on options for structuring and funding the State Owned Enterprises (SOEs) is required in order to apply concepts and information more effectively to policy analysis and program creation. Regardless of the political or economic driving reason for SOE organisation, the requirements of the people must be met in developing countries necessitate that the strategy be viewed from this angle. The types of SOEs and the applicability of fiscal federalism are examined in this article. There are certain lessons to be learnt from the past, and a bad policy can have unintended repercussions. Strategies must be developed for the organisation of SOEs while taking into account the various starting situations.

The primary aim of this study was to investigate the variations in cognitive load as self-efficacy gradually increases and examine the potential within-mediating effect of state anxiety between self-efficacy and cognitive load. The experiment manipulated the self-efficacy of 49 adult participants through the false feedback paradigm, employing a within-subject experimental design and using facial expression recognition as the experimental task. The data were analyzed using Hierarchical Linear Modeling. The results revealed that self-efficacy negatively predicted state anxiety and cognitive load, while state anxiety positively predicted cognitive load. Moreover, state anxiety played a complete mediating role at multiple levels in this process.

Naomi Goldenberg’s model of religion as a “vestigial state” is an excellent interrogation of how religion interacts with the state. To Goldenberg, religions traditionally functioned in the same manner as nation-states before being conquered and delineated as semi-autonomous institutions under the larger secular apparatus. However, I argue in this paper that Goldenberg’s “vestigial state” fails to account for the dynamism that religions have in their relationships to the state. I propose seeing religions as “alternative authorities,” which can be subordinate, cooperative, or hostile to the secular state. These perspectives as an alternative authority are seen best in the evolution of American fundamentalism and Christian nationalism, whose adherents have historically distinguished themselves from the state while simultaneously engaging in the effort to reshape it. In looking at how these movements develop, we understand that religions are constantly evolving in how to achieve and maintain power.

This article investigates hydraulic percolation in saturated porous media, focusing on containment systems using sheet pile walls and gravity concrete dams. The Laplace equation, which governs hydraulic flow in porous media, is solved using the Finite Element Method through the ANSYS software. The modeling of the porous media employs a planar quadratic element called Plane 55, originally used for thermal problems, composed of four nodes and one hydraulic degree of freedom per node. The numerical results of the water pressure acting on the hydraulic structure, flow rate, and hydraulic gradient at the outlet of the porous media are compared with results obtained in the technical-scientific literature using flow nets. Two different methodologies are used to obtain the rate of seepage: by using the average hydraulic velocity or by calculating the integral of the hydraulic gradient perpendicular to the flow area. Both methodologies are compared and validated in the numerical simulations. This work also demonstrates the importance of mesh refinement for obtaining the flow rate in the studied hydraulic systems.

This study focuses on the synthesis, characterization and study of a new perovskite-type materials as cathode in SOFC. The synthesized doped perovskites have been successfully synthesized with high purity. The electrochemical performance of these materials was extensively examined through the characterization of I-V-P and EIS curves at the three temperatures: 750, 800 and 850 °C. Where it is revealing a substantial reduction of total resistances by approximately 50% and 70%, accom-panied by an impressive increase in power densities by around 200% and 300%, respectively. The cell featuring Sm0.01Sr0.99Fe0.5Co0.5O3 exhibited the most commendable electrochemical properties at each temperature, following closely were Pr0.01Sr0.99Fe0.5Co0.5O3 and La0.01Sr0.99Fe0.5Co0.5O3.

In our discipline, some numbers, facts and methods are established and unquestionable. Still, a credible source is hard to find. Likewise, some state-of-the-art papers do not have the right focus, or they do not point at current research trends and future mission statements. Lastly, reliable resources for claims and statements that are arguable are not always found in the typical journals of our field. The paper at hand solves this issue for our field. Through critical review of a vast amount of journal papers, monographs, handbooks, conference proceedings and theses as well as manuals, textbooks and tutorials, numbers, facts, methods, claims statements, state-of-the-art, research and application trends are reflected and substantiated.

Many bacteria have the ability to survive in challenging environments; however, they cannot grow on standard culture media, a phenomenon known as the Viable but Non-Culturable (VBNC) state. Bacteria commonly go into the VBNC state under nutrient-poor environments or under stressful conditions. This review explores the concept of the VBNC state, providing insights into the beneficial bacteria known to employ this strategy. The investigation covers different chemical and physical factors that can induce the latency state, cell features, and gene expression observed in cells in the VBNC state. The revision also covered the significance and applications of beneficial bacteria, methods for evaluating bacterial viability, the ability of bacteria to persist in environments associated with higher organisms, and the factors that facilitate the return to the culturable state. Knowledge about beneficial bacteria capable of entering the VBNC state remains limited, however, beneficial bacteria in this state could face adverse environmental conditions, and return to culturable state when conditions become suitable and continue to exert their beneficial effects. Likewise, this unique feature positions them as potential candidates for healthcare applications, such as the use of probiotic bacteria to enhance human health, applications in industrial microbiology for the production of prebiotics, functional foods, and in the beer and wine industry. Moreover, their use in formulations to increase crop yield and for bacterial bioremediation offers an alternative pathway to harness their beneficial attributes.

Approximately 6 million youth aged 12 to 20 consume alcohol monthly in the United States. The effect of alcohol consumption in adolescence on behavior and cognition is heavily researched, however, little is known about how alcohol consumption in adolescence may alter brain function, leading to long-term developmental detriments. In order to investigate differences in brain connectivity associated with alcohol use in adolescents, brain networks were constructed using resting state functional magnetic resonance imaging data collected by the National Consortium on Alcohol and NeuroDevelopment in Adolescence (NCANDA) from 698 youth (12-21 years, 117 hazardous drinkers and 581 no/low drinkers). Analyses assessed differences in brain network topology based on alcohol consumption in eight pre-defined brain networks, as well as in whole-brain connectivity. Within the central executive network (CEN), basal ganglia network (BGN), and sensorimotor network (SMN), no/low drinkers demonstrated stronger and more frequent connections between highly globally efficient nodes, with fewer and weaker connections between highly clustered nodes. Inverse results were observed within the dorsal attention network (DAN), visual network (VN), and frontotemporal network (FTN), with no/low drinkers demonstrating weaker connections between nodes with high efficiency and increased frequency of clustered nodes compared to hazardous drinkers. Results from this study show clear organizational differences between adolescents with no/low or hazardous alcohol use, suggesting that aberrant connectivity in these brain networks is associated with risky drinking behaviors.

To reduce environmental impacts from sodium silicate synthesis it was suggested the use of sugarcane bagasse ash (SCBA) as a source of silicon dioxide and sodium carbonate using the ceramic method. Although the production of sodium silicate is carried out on a large scale, it should be noted that its process requires temperatures above 1000 °C or the use of highly corrosive agents such as sodium hydroxide and chlorine gas used to neutralize the remaining sodium hydroxide. In the present work, the synthesis temperatures were reduced to 800 °C with a reaction time of 3 hours by pressing equimolar mixtures of previously purified SCBA and sodium carbonate, then heat treatment was carried out under the indicated conditions. The resulting materials were analyzed by Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). Among the crystalline phases, calcium disodium silicate was identified, in addition to sodium silicate, so it was inferred that the other components of the ash can interfere with the synthesis of silicate. Therefore, to obtain the highest composition of sodium silicate, a leaching treatment of the SCBA is required.

Transparent conductive electrodes (TCEs) are of enormous significance to the emergence of flexible and wearable electronics and continued growth of modern devices. Versatile and tunable TCEs, featuring with not only high optical transmittance but also intriguing features of electrochemical energy-storage capability, remain a significant challenge. Here we develop capacitive active films comprised of graphene-conjugated V2O5@poly (3,4-ethylene dioxythiophene) ternary composite (V2O5@PEDOT/rGO) on silver nanowire coated substrates as solid-state super/pseudocapacitors. The constructed electrodes exhibit improved electrolyte ions interaction with effective graphene layer, achieving high areal capacitance 0.6-1.2 mF.cm−2 with 0.5M LiCl electrolytes at optical transparency >60% with record durability. As demonstrated, the kinetic blocking of PEDOT layer and anchoring capability of graphene upon amphoteric soluble vanadium ions from layered V2O5 nanoribbons/nanobelts contribute synergistically to the unusual electrochemical stability, also shown using scanning electrochemical microscopy (SECM) providing electroactivity sites and ion transportation rates. As-fabricated symmetric solid-state supercapacitors delivered broad potential window >1.4 V under two different electrolyte environments (aqueous LiCl and LiCl/PVA gel) and demonstrated higher power and energy density (0.27 μWh.cm−2) outperforming previously reported devices at <0.1 μWh.cm−2. The electrochemical properties are also discussed in terms of solvation in polymer gel electrolyte ions.

Background: World Health Organization (WHO) estimates that there were 558000 new cases with resistance to Rifampicin, of which 82% had multidrug-resistant tuberculosis (MDR-TB). Objectives: We aimed to identify the prevalence of MDR-TB in River Nile state, Sudan, and the risk factors contributing to its occurrence. Methods: This was a descriptive cross-sectional hospital-based study involved 200 specimens taken from patients suspected of having MDR-TB tested using an automated GeneXpert assay. Results: Results of GeneXpert assay showed that the presence of Mycobacterium tuberculosis in 81 (40.5%), and out of 81 positive test results there were 13 (16%) had MDR-TB. Additionally, 7 cases of MDR-TB were previously treated which represented about (53%) of MDR patients, the remaining 6 MDR-TB patients were new cases and represented (47%) of MDR-TB patients. Moreover, there were 4 MDR-TB patients who had a history of contact with MDR-TB patients. Conclusion: Prevalence of MDR-TB in River Nile State, Sudan was 16%, which is greater than WHO estimation for Sudan (10.1%). The results revealed that the main risk factor to develop MDR-TB was a history of contact with MDR-TB, so adherence to treatment and social awareness about the spread of MDR-TB are crucial preventive measures.

In the paper is described the control electronics for an industrial pneumatic – hydraulic system based on a low-cost PLC. The developed system is a hydraulic pulse system and it generates series of high pressure hydraulic pulses (max. 200 bar). We describe requirements, an overall concept of the embedded control system, user interface, security features and network connectivity. In the description of the software solution we describe implementation of hierarchical ordered program threads (multithreaded program) and main control state machine. At the conclusion, we describe the calibration method of the system and calibration curves and we present the schematic diagram and a photo of a functional prototype of the system.

In this article we derive a closed form expression for the symmetric logarithmic derivative of Fermionic Gaussian states. This provides a direct way of computing the quantum Fisher Information for Fermionic Gaussian states. Applications range from quantum Metrology with thermal states to non-equilibrium steady states with Fermionic many-body systems.

This paper discusses the management of public expenditures in Indonesia in State Budget 2017. The data collected from fiscal policy documents, especially about government spending plans in 2017, and then be reviewed by policy analysis, the theory of public expenditures, and the theory of public goods, and compared with the theory of public expenditure in Islamic economics. Public expenditure management in Indonesia has implemented a distribution system that divided public expenditure for central government expenditures, transfers to the regions, and the village fund. In terms of fiscal policy, public expenditure priorities to support the achievement of sustainable economic growth, job creation, poverty reduction, and the reduction of gaps in the welfare of the whole community. In Islamic economics, public expenditure is used to meet the needs of the community based on the principles of general interest derived from the shari'a. Public expenditure on Indonesia's government as an effective tool to divert economic resources and increase the income of society as a whole, and focused on the embodiment of the people's welfare.

The current state-of-the-art does not provide a universal and rapid method of determining the state of health (SOH) of a battery or a supercapacitor without carefully examining the degradation of hundreds of full charge/discharge cycles. Lithium-ion batteries, sodium-ion batteries and supercapacitors of different cell chemistries were studied by impedance spectroscopy during lifetime tests. Faradaic and capacitive charge storage are distinguished by the relationships between stored electric charge and capacitance. For batteries, impedance spectroscopy is best applicable in the flat region of the voltage-charge curve. An approximately linear correlation between pseudocapacitance and Ah capacity is observed as long as overcharge and deep discharge are avoided. The correct calculation of quantities related to complex impedance and differential capacitance is outlined – which may also be useful as an introductory text and tutorial for newcomers to the field. Novel diagram types are proposed for the purpose of instant performance and failure diagnosis of batteries and supercapacitors.

One of the most common solutions to access underground is through the construction of circular shafts. At preliminary design stage analytical expressions are often used to estimate the horizontal earth pressure acting on the lining. However, most of these solutions are based on active state conditions and do not consider the restrictions imposed on the shaft lateral displacements by the rigidity of its lining or by the construction method employed. To overcome this limitation a new methodology to account with the shaft lateral displacements in the determination of the horizontal earth pressure acting on circular shafts is developed and validated against the results of relevant physical scale models. The obtained results show good agreement with the measured data, reproducing adequately the reduction of the horizontal earth pressure from its initial value to an active state condition with the increase of the shaft lateral displacement. Following this approach more realistic predictions of the earth pressure acting on the lining of circular shafts can be performed.

Using the example of III-V nitrides crystallizing in a wurtzite structure (GaN, AlN, InN), this review presents the special role of hydrostatic pressure in studying semiconductor properties. Starting with a brief description of high pressure techniques for growing bulk crystals of nitride compounds, we focus on the use of hydrostatic pressure techniques in both experimental and theoretical investigations of special properties of nitride compounds, their alloys and quantum structures. The band gap pressure coefficient is one of the most important parameters in semiconductor physics. Trends in its behavior in nitride structures, together with trends in pressure-induced phase transitions, are discussed in the context of the behavior of other typical semiconductors. Using InN as an example, the pressure-dependent effects typical of very narrow bandgap materials, such as conduction band filling or effective mass behavior, are described. Interesting aspects of bandgap bowing in In-containing nitride alloys, including pressure and clustering effects, are discussed.Hydrostatic pressure also plays an important role in the study of native defects and impurities, as illustrated by the example of nitride compounds and their quantum structures. Experiments and theoretical studies on this topic are reviewed. Special attention is given to hydrostatic pressure and strain effects in short periods nitride superlattices. The explanation of the discrepancies between theory and experiment in the optical emission and its pressure dependence from InN/GaN superlattices led to the well-documented conclusion that InN growth on the GaN substrate is not possible. The built-in electric field present in InGaN/GaN and AlGaN/GaN heterostructures crystallizing in wurtzite lattice can reach several MV/cm, leading to drastic changes in the physical properties of these structures and related devices. It is shown how hydrostatic pressure modifies these effects and helps to understand their origin.

Hydrodynamic resistance is a critical parameter in microfluidics, affecting device functionality and performance. However, quantifying hydrodynamic resistance in microfluidics is a challenge due to many influencing factors and the difficulties associated with the precise measurements of low flow rates (< 10 L/min) and pressure drops (< 5 kPa). This article presents a simple experimental test method for assessing hydrodynamic resistance, correlating with theoretical and numerical calculations. The results demonstrate good agreement between benchtop and theoretical data, suggesting a potential standardized method for assessing hydrodynamic resistance in microfluidic devices.

Membrane-based sensors (MePSs) exhibit remarkable precision and sensitivity in detecting pressure changes. MePSs are commonly used to monitor catalytic reactions in solution, generating gas products crucial for signal amplification in bioassays. They also allow catalyst quantification by indirectly measuring the pressure generated by the gaseous products. This is particularly interesting to detect enzymes in biofluids associated with disease onset. To enhance the performance of a MePS, various structural factors influence membrane flexibility and response time, ultimately dictating the device's pressure sensitivity. In this study, we fabricated MePSs using polydimethylsiloxane (PDMS) and investigated how structural modifications affect the Young's modulus (E) and residual stress (σ0) of the membranes. These modifications have a direct impact on the sensors' sensitivity to pressure variations, observed as a function of the volume of the chamber (Σ) or of the mechanical properties of the membrane itself (S). MePSs exhibiting the highest sensitivities were then employed to detect catalyst quantities inducing the dismutation of hydrogen peroxide, producing dioxygen as gaseous product. As a result, catalase enzyme was successfully detected using these optimized MePSs, achieving a remarkable sensitivity of (22.7 ± 1.2) µm/nM and a limit of detection (LoD) of 396 pM.

We have successfully synthesized a series of Bi doped BaFe2As2 high quality single crystals for the first time. The x-ray diffraction (XRD) patterns show an expansion of lattice parameter c with Bi doping, indicating a negative pressure effect. By investigating the resistivity, a Fermi liquid (FL) to non-Fermi liquid (NFL) crossover is observed from normal state to antiferromagnetic order state, accompanied by three superconducting transitions labeled as SC I, SC II and SC III which are supposed to be induced from three superconducting realms with various Bi concentration. Thus, the NFL behavior is proposed to be closely related with the presence of superconductivity. The magnetic susceptibility measurements further speculates that the SC I and SC III phases should be filamentary superconductivity while the SC II be a possible bulk superconductivity with TC 7 K.

Runaway electrons (RAEs) generation in high-pressure gases is an important physical phenomenon that influences significantly discharge shapes and properties of initiated plasma. The diffuse discharges formed due to RAEs in air and other gases at atmospheric pressure find wide application. In the present review, theoretical and experimental results that explain the reason for the RAEs occurrence at high pressures are analyzed and recommendations are given on the implementation of conditions under which the runaway electron beam (RAEB) with the highest current can be obtained at atmospheric pressure. Experimental results were obtained using subnanosecond, nanosecond, and submicrosecond generators, including those specially developed for runaway electron generation. The RAEB were recorded by oscilloscopes and collectors with picosecond time resolution. To describe theoretically the phenomenon of continuous electron acceleration, the method of physical kinetics has been used based on the Boltzmann kinetic equation that takes into account the minimum but sufficient number of elementary processes, including shock gas ionization and elastic electron scattering. Results of modeling allowed the main factors to be established that control the RAE appearance, the most important of which is electron scattering on neutral atoms and/or molecules. Theoretical modeling has allowed the influence of various parameters (including the voltage, pressure, gas type, and geometrical characteristics of the discharge gap) to be taken into account. The results of research presented here allow the RAEs accelerators with desirable parameters to be developed and the possibility of obtaining diffuse discharges to be accessed under various conditions. The review consists of the Introduction, 5 Sections, the Conclusion, and the References.

This paper presents the experimental campaign conducted near the Condoroma dam at 4075 m a.s.l. in an experimental setup consisting of a series of standard profile spillways with a vertical upstream face of up to five different dimensionless heights (P/Hd). The experimental results indicate that for all P/Hd ratios studied, the discharge coefficients adjusted to the Condoroma altitude are lower than those reported by classical formulations used in conventional spillway design. As a result, a generalized equation is proposed to estimate the discharge coefficient for standard spillways located in dams at similar elevations above sea level.

A study was conducted on the power system of a forklift equipped with PEM fuel cells. A fuel cell assembly relies on several components for proper functioning, and among these, the air compressor holds paramount importance due to its significant energy consumption when compared to other Balance of Plant components. The air supply system, in turn, plays a critical role in ensuring the stable and efficient operation of the entire fuel cell system. To enhance system efficiency, we delved into the impact of varying the stoichiometric ratio of air and air pressure on the validated and optimized power module model. This investigation was carried out under real loading conditions, replicating the conditions experienced by the power module when fuel cells are in use within a forklift. The air compressor, being a pivotal component of a PEM fuel cell system, can be oper-ated at different excess air and pressure ratios, which in turn influence both the fuel cell's performance and the overall efficiency of the power module system. Our research focused on assessing the performance of polymer electrolyte membrane (PEM) fuel cells under different load cycles, adhering to the VDI60 requirements for forklift applications. This comprehensive examination encompassed the system's minimum and maximum load scenarios, with the primary goal of optimizing excess air and pressure ratio parameters, especially under dynamic load conditions. The results revealed that higher air pressures and lower excess air ratios were con-ducive to increasing system efficiency, shedding light on potential avenues for enhancing the performance of PEM fuel cell systems in forklift applications.

The service life of the reinforced concrete structure in the marine environment can be impaired significantly due to chloride-induced corrosion. However, how the chloride diffusion in pre-cracked concrete structures is affected by the hydrostatic pressure magnitude is poorly understood. This study experimentally examined the effect of hydrostatic pressure on the chloride diffusion in pre-cracked concrete. Cracks with five different widths, i.e., 20 μm, 40 μm, 60 μm, 80 μm, and 100 μm, were manually created using a splitting tensile apparatus respectively. The chloride diffusion in the concrete with a certain crack was then studied under four different hydrostatic pressures of 0 MPa, 0.1 MPa, 0.3 MPa, and 0.5 MPa. Experimental results show that the chloride diffusion in concrete with a crack greatly relies on both the hydrostatic pressure and the crack width. The chloride concentration increases as the hydrostatic pressure grows, particularly for the wider cracks with width ranging from 60 μm to 100 μm. Surprisingly, the hydrostatic pressure has a negligible effect on the chloride distribution in the concrete with a crack width no larger than 40 μm. Both the chloride diffusion coefficient and the surface chloride concentration of concrete increased gradually as the hydrostatic pressure increased. The experimental findings enrich our understanding of the behavior of pre-cracked concrete when exposed to chloride-induced corrosion at different depths of marine environments.

The high protein content of several microalgal species makes them attractive and unconventional for applications in the food and pharmaceutical industries. Due to microalgae's robust cell wall, cell rupture is necessary to improve the extraction of their intracellular proteins. Thus, choosing a suitable cell-breaking treatment before protein extraction is a vital downstream processing step. Additionally, it is necessary to use an effective technique for monitoring and measuring the impact of rupture treatments on microalgal cell walls. In our study, Tetradesmus obliquus cells were disrupted by three different mechanical rupture methods: high-pressure homogenization (HPH), ultrasound (US), and ball milling (BM). The ruptured biomass cells were counted, and soluble proteins were extracted and quantified. The cell counting technique did not detect differences between intact and damaged cells after BM treatment because the dye (erythrosine B) did not permeate the microalgae biomass accurately. The US treatment promoted the highest yield of total protein extraction (19.95%). The yields of protein extraction of T. obliquus with HPH (15.68%) and BM (14.11%) were significantly (p value ≤ 0.05) lower than that achieved in the US treatment. The increase in the number of extraction steps increased the protein recovery. Thus, the content of extracted soluble protein was a reliable indirect index for a quantitative comparison of the cell disruption level.

Consumption of high amounts of ethanol is a risk factor for development of cardiovascular diseases such as arterial hypertension. The hypertensive state induced by ethanol is a complex multi-factorial event, and oxidative stress is a pathophysiological hallmark of vascular dysfunction associated with ethanol consumption. Increasing levels of reactive oxygen species (ROS) in the vasculature triggers important processes underlying vascular injury, including accumulation of intracellular Ca2+ ions, reduced bioavailability of nitric oxide (NO), activation of mitogen-activated protein kinases (MAPKs), endothelial dysfunction, and loss of the anticontractile effect of perivascular adipose tissue (PVAT). The enzyme nicotinamide adenine dinucleotide phosphate (NADPH) oxidase plays a central role in vascular ROS generation in response to ethanol. Activation of the renin-angiotensin-aldosterone system (RAAS) is an upstream mechanism which contributes to NADPH oxidase stimulation, overproduction of ROS and vascular dysfunction. This review discusses the mechanisms of vascular dysfunction induced by ethanol, detailing the contribution of ROS to these processes. Data examining the association between neuroendocrine changes and vascular oxidative stress induced by ethanol are also reviewed and discussed. These issues are of paramount interest to public health as ethanol contributes to blood pressure elevation in the general population, and it is linked to cardiovascular conditions and diseases.

Numerical simulations and experiments on evaporative condensers in air conditioning systems using R744 were performed. Two configurations were given to study the feasibility of operating the subcritical R744 cycle. It indicated the capable of evaporative cooling condensing R744 to liquify by analyzing the outlet temperature at the end of the condenser reached from 28.7oC to 30.3oC with the operating pressure from 72.6 bar to 68.5 bar. The mass flow rate in the study increases from 14.34 kg/h to 46.08 kg/h, the pressure drop also increases from 0.23 bar to 0.47 bar for the simulation and 0.4 bar to 0.5 bar for the experiment, respectively. This study indicates that a 5-layers of copper tubes configuration causes a higher pressure drop and lower COP when compared to an 8-layers of copper tubes that split into 2 sets for smaller pressure drop. In this study, the evaporative condensers using mini tubes that are flooded in the cooling water tank are suitable for the subcritical R744 air conditioning system. The results obtained from the experimental data are in good agreement with those obtained from the numerical results, with the deviation less than 5%.

GDF5 gene is involved in the development of skeletal elements, synovial joint formation, tendons, ligaments, and cartilage. Several polymorphisms are present within the gene and two of them, rs143384 and 143383, have been reported as correlated with osteoarticular disease or muscle flexibility. The aim of this research is to verify if the worldwide distribution among human populations of rs143384 polymorphism has been shaped by selective pressure, or if it’s the result of random genetic drift events. Ninety-four individuals of both sexes, 18-28 years old, from Sardinia were analyzed. We observed the following genotype frequencies: 28.72% of homozygotes AA, 13.83% of homozygotes GG, and 57.45% of heterozygotes AG. Allele frequencies were 0.574 for allele A and 0.426 for alle G. Relationships between populations were verified by Multidimensional Scaling (MDS). Our data show: i) a clear heterogeneity within the African populations; ii) a strong differentiation between Africans and the other populations: iii) the Sardinian population is placed withing the European cluster. To reveal possible traces of selective pressure, Population Branch Statistic (PBS) was calculated; both SNPs rs143384 and 143383 have low PBS values, suggesting that there are no signals of selective pressure in those areas of the gene.

The close proximity of different buildings heights can cause disturbances in the working of the smoke and ventilation ducts of lower buildings, threatening the health and even the lives of residents. To define the influence of high-rise building on the work of the ducts of the neighbouring double-storied building, experimental investigations in the wind tunnel were conducted. On this basis, empirical equations and graphs were developed leading to determining the aerodynamic coefficients considering different wind directions and the height of ducts. The direction of the wind reveals a greater influence than the height of the ducts. Properly using deflectors or increasing the height of the duct ensures maintaining static rarefaction in the area of smoke and ventilation ducts. The creation of rarefaction ensures the reliability of the natural ventilation system and the safety of the health of residents.

A numerical method using combined detached-eddy simulation (DES) and cavitation model considering the rotation effect is used for unsteady cavitation flow field of the centrifugal pump. Closed type pump test system was established to obtain the pump performance and pressure pulsation characteristics under different flow rates and cavitation condition, which provide boundary conditions and verification of calculations. Based on the calculation results of the unsteady flow field of the centrifugal pump cavitation, the entropy generation analysis of the flow field and the pressure fluctuation characteristics were carried out. Then the relationship between cavitation and the deterioration of the centrifugal pump performance and the generation of the unstable operation excitation force was tried to reveal. The internal energy loss is mainly concentrated in the impeller, volute, and pump cavity area, which accounts for more than 85% of the total entropy generation. The characteristic frequency of about 0.333 Strouhal Number appears at the volute tongue due to the cavitation flow spread downstream.

Pipe leakage is an inevitable phenomenon in water distribution networks (WDNs), leading to energy waste and economic damage. Leakage events can be reflected quickly by pressure values, and the deployment of pressure sensors is significant for minimizing the leakage ratio of WDNs. Concerning the restriction of realistic factors, including project budgets, available sensor installation locations, and sensor fault uncertainties, a practical methodology is proposed in this paper to optimize pressure sensor deployment for leak identification in terms of these realistic issues. Two indexes are identified to evaluate the leak identification ability, that is, detection coverage rate (DCR) and total detection sensitivity (TDS), and the principle is to determine priority to ensure an optimal DCR and retain the largest TDS with an identical DCR. Leakage events are generated by a model simulation and the essential sensors for maintaining the DCR are obtained by subtraction. In the event of a surplus budget, and if we suppose the partial sensors have failed, then we can determine the supplementary sensors that can best complement the lost leak identification ability. Moreover, a typical WDN Net3 is employed to show the specific progress, and the result shows that the methodology is largely appropriate for real projects.

High temperatures (HT) and high hydrostatic pressures (HHP) are characteristic of deep-sea hydrothermal vents and other deep crustal settings. These environments host vast and diverse microbial populations, yet only a small fraction of those populations have been successfully cultured. This is due, in part, to the difficulty of sampling while maintaining these in situ conditions and also replicating those high-temperature and high-pressure conditions in the laboratory. In an effort to facilitate more HT-HHP cultivation, we present two HT-HHP batch culture incubation systems for cultivating deep-sea vent and subsurface (hyper)thermophilic microorganisms. One HT-HHP system can be used for batch cultivation up to 110 MPa and 121°C, and requires sample decompression during subsampling. The second HT-HHP system can be used to culture microorganisms up to 100 MPa and 160°C with variable-volume, pressure-retaining vessels that negate whole-sample decompression during subsampling. Here, we describe how to build cost effective heating systems for these two types of high-pressure vessels, as well as the protocols for HT-HHP microbial batch cultivation in both systems. Additionally, we demonstrate HHP transfer between the variable-volume vessels, which has utility in sampling and enrichment without decompression, laboratory isolation experiments, as well as HHP filtration.

BACKGROUND: To present a new method of urethral pressures examination, and to evaluate diagnostic capabilities of three dimensional profilometry , as an alternative to classical urethral profile (UPP) .Using four channel catheters and dedicated software global urethral pressures image is obtained. The method eliminates the main limitation of classical urethral profilometry where the catheter orientation determines the pressures picture limited to only one point in the uretral circumference while we observed even 50% differences in pressure measures depending on the point of measurement. METHODS: This is a preliminary study containing method presentation and analisys of the use in varied clinical cases of either healthy patients and patients with LUTS. The article includes technique and equipment decription, full evaluation of selected cases, including three dimensional urethral pressures distribution graphics. RESULTS AND CONCLUSIONS:Three dimensional profilometry compared to classical technique is comparable regarding the time, cost, technical difficulty and patient discomfort. At the same time we obtain much more data on the urethral pressures and its distribution.The results are easy for interpretation due to 3D movable graphics created automatically through the dedicated software.

To compare surgical and refractive outcomes between phacotrabeculectomy (P-Trab) and phaco with Ex-PRESS (P-Ex-PRESS) for glaucoma at 6-month follow-up. This prospective randomized controlled trial included 81 eyes; 43 (53%) and 38 (47%) were assigned to the P-Ex-PRESS and P-Trab groups, respectively. Refraction, intraocular pressure (IOP), and best-corrected visual acuity were measured. Refractive change was described by analyzing the magnitude of the cylinder, and polar analysis assessed the change in trend of astigmatism [with-the-rule, against-the-rule (ATR), oblique] evaluating mean astigmatism in centroid form. All patients showed statistically significant postsurgical decrease in IOP (P&lt;0.05). There were no differences neither between the groups for postoperative IOP or visual outcomes, nor in astigmatism before or after surgery (P=0.61, P=0.74). In both groups, the mean pre- and postoperative astigmatism was ATR and OBL, respectively. Pre- and postoperative centroids in the P-Ex-PRESS group were 0.44±1.32 D at 177˚ and 0.35±1 D at 8˚, respectively, (P=0.5) and in the P-Trab group, 0.16±1.5 D at 141˚ and 0.39±1.38 D at 29˚, respectively (P=0.38). Both P-Ex-PRESS and P-Trab showed comparable antihypertensive efficacy in treating open-angle glaucoma in a 6-month period. Pre- and postoperative astigmatism did not differ between groups. The groups showed comparable results for final visual acuity.

The zero velocity update(ZUPT) algorithm is the core of a foot-mounted pedestrian navigation system. The zero velocity detection method is the premise and guarantee of the effective application of the ZUPT algorithm. To make ZUPT work properly, it is necessary to detect zero velocity intervals correctly. The detection accuracy of the existing zero velocity detection methods is easy to be affected by users and environment. A novel zero velocity detection method based on the plantar pressure is proposed in this paper, which has higher detection accuracy and better environmental adaptability. First, the paper analyzes the motion characteristics of foot during walking. Second, the inherent relationship between the plantar pressure and the gait change during walking is studied based on the pressure sensor. Then, the model of the zero velocity detection method using the plantar pressure is established. Finally, the indoor and outdoor multi-scene experiments show that this method not only has a high detection accuracy, but also has good adaptability to users and walking environment.

With the emergence of COVID-19 we are confronted with a new clinical picture of acute respiratory distress syndrome in the intensive care unit. In the majority of patients, the respiratory mechanics are very different from the “normal” ARDS patient. We measured transpulmonary pressure and dead space ventilation to assess the effects of high and low PEEP levels on lung compliance and ventilation-perfusion mismatching. Advanced respiratory mechanics were assessed in 14 patients. Compared to ARDS patients, lung compliance was relatively high (61 ± 5 mL/cmH₂O). COVID-19 patients had high dead space ventilation and gas exchange impairment (Bohr 52 ± 3%; Enghoff modification 67 ± 2%; ventilatory ratio 2.24 ± 0.23). we show that higher PEEP levels decrease lung compliance and in most cases increase dead space ventilation, indicating that high PEEP levels probably cause hyperinflation in patients with COVID-19. We suggest using prone position for an extended period of time, and apply lower PEEP levels as much as possible.

The aim of this paper is the presentation of an analytical model of insulator flashover and its application for air at atmospheric pressure and pressurized SF6. After a review of the main existing models in air and compressed gases, we develop a relationship of flashover voltage on the basis of an electrical equivalent circuit and the thermal properties of the discharge. The model includes the discharge resistance, the insulator impedance, and the gas interface impedance. The application of this model to a cylindrical resin-epoxy insulators in air medium and SF6 gas with different pressures gives results close to the experimental measurements.

Abstract In order to reduce the failure accidents of conventional packers, a kind of sealing structure of retrievable packers is designed, which can provide reference for optimizing the sealing performance and pressure capacity of packers. And theoretical calculation and experimental research on its sealing performance and pressure capacity are carries out through the finite element analysis on the contact with large deformation based on Abaqus and experimental. The results show that when the rubber cylinder of retrievable packers in the sealing process, the upper packer is subjected to greater stress and mainly plays a sealing role. In order to improve the sealing performance of packer, the height of upper and lower packer should be preferentially selected about 60 mm, the height of middle rubber cylinders should be about 50 mm, and the thickness of packer should be about 21 mm. The newly designed rubber cylinders can meet 150 ℃. Sealing and pressure-bearing function under the condition of 10000 Psi. The rubber cylinder of newly designed can satisfy the function of sealing and pressure-bearing under 140 ℃ and 10000 Psi. The whole experiment shows that the capacity of bearing pressure and sealing is stable, which can better meet the requirements of field use.