Catalytic studies for hydrogen production via steam reforming of ethanol (SRE) are essential for process optimization. Likewise, selecting the ideal support for the active phase can be critical to achieve high conversion rates during the catalytic steam reforming. In this work, copper-based catalysts were synthesized using two different supports, NaY zeolite and Nb2O5/Al2O3 mixed oxides. The materials were prepared using wet impregnation and characterized for their physicochemical properties using different analytical techniques. Differences in catalyst morphologies were readily attributed to the characteristics of the support. The Cu/NaY catalyst showed better textural properties than Cu/Nb2O5/Al2O3, resulting in a homogeneous metal dispersion over the support surface. Both catalytic systems were active in SRE, but Cu/NaY resulted in higher ethanol conversions compared to Cu/Nb2O5/Al2O3. Hence, the performance of copper-based catalysts was influenced significantly by the textural properties of the support.

Seroconversion surveys of anti-SARS-CoV-2 antibodies provide accurate estimates of the SARS-CoV-2 infection. This nationwide population-based cross-sectional serosurvey aimed to evaluate the prevalence of SARS-CoV-2 antibodies among residents in Gabon and compare the estimated cumulative number of COVID-19 cases with the officially registered number of laboratory-confirmed cases up to December 2021. Households in each province were randomly selected. Twenty-eight localities including 16 urban and 12 rural, were randomly selected to participate in the study. Whole blood samples were collected in dry tubes from all study participants around the country within 15 days. Serum samples were used to measure the total Immunoglobulin antibodies. Overall, data of 1672 households were analyzed. Out of the 3659 participants, 3175 were found positive for SARS-CoV-2 antibodies, resulting in a crude seroprevalence of 86.77%. Stratification of study participants by age group has shown highest seroprevalences in 20–29 and 40-49 age groups with 91.78% (95% CI:89.5–93.6) and 91.42% (95% CI:88.7–93.5), respectively. Nyanga province had the lowest prevalence (72,8%), and Estuaire and Ogoué-Lolo provinces had the highest prevalence (90 and 92%, respectively). Our results suggest a high transmission rate in the Gabonese population, 21 months after the first SARS-CoV-2 case in the country. This high seroprevalence estimate could indicate that the applied infection control measures may not have been adequately implemented or appropriately adhered to by the population.

With its unique properties and potential applications, nanoparticle-based delivery platforms for vac-cines have gained significant attention in recent years. Nanoparticles have the advantages of enhancing immunogenicity, targeting delivery and improving stability, providing a new solution for drug and vaccine delivery. And in some clinical studies, a variety of nanoparticle delivery platforms have been gradually applied to a wide range of vaccine applications. Current research priorities are exploring various types of nanoparticles as vaccine delivery system to enhance vaccine stability and immunogen-icity. Lipid nanoparticles have shown promising potential in preclinical and clinical studies to efficiently deliver antigens to immune cells. Moreover, lipid nanoparticles (LNPs) and other nanoparticles as nu-cleic acids especially mRNA delivery system, have shown vast potential for vaccine development. In this review, we present various vaccine platforms with an emphasis on nanoparticles for mRNA nano-vaccine delivery vehicles. We introduce several novel nanoparticles delivery platforms for mRNA vac-cine such as lipid, polymer, protein-based nanoparticle and so on. In addition, we overview the an-ti-tumor immunity of nanovaccine against different tumors in cancer immunotherapy. Finally, we give an outlook future perspectives and remaining challenges for this promising technolo-gy-nanoparticle-based delivery platforms for vaccines.

Proper Post-Activation Performance Enhancement helps to improve athletic performance. This study aimed to investigate the effects of two different velocity loss (VL), 10%VL and 20%VL, on post-activation performance enhancement (PAPE) in 20m sprint performance among sprint athletes. Twenty-four male sprint athletes (100m sprint time: 10.96±0.15 s) were recruited. A randomized crossover experimental design was used for traditional group (TG), 10%VL, and 20%VL interventions. Sprint tests were conducted at the 4th, 8th, 12th, and 16th minutes after the intervention. Two-way repeated measures ANOVA revealed an interaction effect between group and time on 20m sprint performance (F=2.817, p=0.037, partial η²=0.585). Simple effect analyses showed significant differences compared to baseline at the 4th minute for the 20%VL group (P<0.05). Cohen's d values indicated improvement in 10m sprint times at the 8th minute of the rest interval for all three intervention groups (TG: ES=-0.270, 10%VL: ES=-0.038, 20%VL: ES=-0.279). Improvement in 20m sprint times was observed at the 4th minute for the 20%VL group (ES=-0.296) and at the 16th minute for the 10%VL group (ES=-0.276). Compared to traditional PAPE schemes based on 1RM, PAPE schemes based on velocity loss (20%VL) can better induce PAPE effects in sprint athletes.

Sewage surveillance can be used as an effective complementary tool for detecting pathogens in local communities, providing insights into emerging threats and aiding in the monitoring of outbreaks. In this study using qPCR and whole genomic sewage surveillance, we detected Mpox virus along with other viruses, in municipal and hospital wastewaters in Belo Horizonte, Brazil over a 9 months period (from July 2022 till March 2023). MPXV DNA detection rates varied in our study, with 19.6% (11 out of 56 samples) detected through the hybrid capture method of whole genome sequencing and 20% (12 out of 60 samples) through qPCR. In hospital wastewaters, the detection rate was higher at 40% (12 out of 30 samples), compared to 13.3%(4 out of 30 samples) in municipal wastewaters. This variation could be attributed to the relatively low number of MPXV cases reported in the city, which ranged from 106 to 341 cases during the study period, and to dilution effects, given that each of the two wastewater treatment plants (WWTP) investigated serves approximately 1.1 million inhabitants. Additionally, nine other virus families were identified in both hospitals and municipal wastewaters including Adenoviridade, Astroviridae, Caliciviridae, Picornaviridade, Polyomaviridae, Coronaviridae (which includes SARS-CoV-2), Herspesviridae, Papillomaviridae and Flaviviridae (notably including Dengue). These findings underscore the potential of genomic sewage surveillance as a robust public health tool for monitoring a wide range of viruses circulating in both community and hospitals environments including MPXV.

Despite its growing importance as a dry beneficiation method, there is a lack of studies exploring the fundamentals aspects of dry jigging. In this sense, this study focuses on explore some essential aspects of density-based separation in dry jigs, like pulse profile, energy consumption and, especially, stratification over time, also exploring an innovative operational strategy here called “transient pulsation”. The tests were carried out using density tracers distributed across 11 density ranges (0.4-2.4 g/cm³) and employing a base bed (gravel) to analyze their segregation in a pilot-scale dry jig. Pressure drop and active power data were acquired to measure the pulse characteristics and energy consumption. The findings suggest that establishing the dry jigging cycle is more complex than in hydraulic jigs due to the compressibility of air. Stationary pulsation tests revealed an unstable behavior of stratification over time, contrasting with traditional hydraulic jigs, while transient pulsation tests unveiled varied trends in separation quality. Energy consumption analysis underscored the significant role of the blower drive. These insights have the potential to inform operational enhancements in dry jigging.

We construct a Bayesian estimator for the dilution of a wastewater sample. When wastewater is diluted by rainwater an estimate of the level of dilution is required if we are to normalise sample measurements of disease markers such as SARS-CoV-2 RNA. We consider the situation where flow measurements are available, but will regularly be unreliable because of the action of combined sewer outflows (CSOs) and wastewater storage tanks, which divert wastewater away from treatment plants when the flow is excessive. However, we also have proxies for the flow from various chemical markers (e.g.\ phosphate, ammonium, electrical conductivity), whose level per unit of population is fixed. The new flow estimator has multiple advantages compared to existing procedures: credible intervals for the estimates; optimal weighting of the chemical markers; systematic handling of missing and censored values; and model based smoothing without lags.

Glioblastoma (GBM) is the most common malignant brain tumor in adults. Despite advancements in treatment, the prognosis for patients with GBM remains poor due to its aggressive nature and resistance to therapy. CRISPR-based genetic screening has emerged as a powerful tool for identifying genes crucial for tumor progression and treatment resistance, offering promising targets for tumor therapy. In this review, we provide an overview of the recent advancements in CRISPR-based genetic screening approaches and their applications in GBM. We highlight how these approaches have been used to uncover genetic determinants of GBM progression and susceptibility to various therapies. Furthermore, we discuss ongoing challenges and future directions of CRISPR-based screening methods in advancing GBM research.

Using UAV-based multispectral images for quickly and accurately monitoring chlorophyll content is critical for field management and yield estimation. However, the lower model accuracy and the poor robustness of the estimation models are still preventing the widespread application of UAV-based multispectral images. We carried out two field trials at various experimental sites to further enhance the precision and applicability of the model used to estimate the chlorophyll content of potato plants. Firstly, the texture features and vegetation indices derived from multispectral images were screened using the Pearson correlation coefficient method, and Normalized difference red edge (NDRE) performed the best over the two growth periods. Secondly, principal component analysis (PCA) was applied to recombine five bands of multispectral images, and third PCA results (PCA3) was selected to combined with NDRE according to the construction principle of NDRE, and the newly constructed parameter was named improved NDRE (INDRE). Finally, INDRE was used to establish a chlorophyll content estimation model of potato plants, and compared with some traditional parameters. The results demonstrated that the INDRE had the maximum accuracy (R2 = 0.7865, RMSE = 2.1378), and corresponding R2 increased by 0.1481 and RMSE decreased by 1.2994 than NDRE. Additionally, the model was validated using independent data from Experiment 2, and INDRE considerably increased estimation accuracy compared to other factors. In conclusions, the INDRE suggested in this study significantly enhances the accuracy and applicability of the chlorophyll content inversion model and can serve as an additional reference for fertilization management.

The escalating levels of atmospheric carbon dioxide (CO₂) due to anthropogenic activities have raised significant concerns regarding their far-reaching consequences, including potential impacts on human brain function. This study employs Agent-Based Modeling (ABM) and a comprehensive literature review to comprehensively examine the effects of varying atmospheric CO₂ concentrations on human brain activity. Historical and projected CO₂concentration data, along with neuroscientific insights, were integrated into the ABM framework to simulate brain activity responses under different CO₂ scenarios. The simulations revealed that elevated CO₂ levels disrupt neural activity and alter neurotransmitter profiles, indicating potential cognitive consequences. Sensitivity analysis emphasized the importance of accurate parameterization for robust simulations. The findings underscore the urgent need to address global CO₂ emissions to preserve cognitive health. Further research is essential to validate and refine the model, incorporating additional factors for a comprehensive understanding of the cognitive repercussions of rising CO₂ levels, crucial for informed policy-making and public awareness campaigns.

Among the various types of gas sensors, the chemoresistive gas sensors based on metal oxides are considered the most attractive ones due to their simple operation, low costs and miniaturization. Thin films of V2O5 undoped and doped with TiO2 were studied as nitrogen dioxide, methane and hydrogen sensors. The experimental kinetics of the electrical conductivity changes due to introduction and removal of gas on metal oxide gas sensors were successfully explained in terms of the Langmuir adsorption theory.

Background: Recent research suggests a concerning trend of non-suicidal self-injury (NSSI) and suicidal behaviors emerging at younger ages (as early as age 12). Early onset of NSSI is linked to more severe outcomes. While universal school-based prevention programs have shown promise in addressing suicidal behaviors, there's limited research on their effectiveness in preventing NSSI onset among adolescents. This study aims to evaluate the efficacy of a universal prevention program in schools for NSSI and mental complaints while enhancing resilience and mental health in 11-14-year-old adolescents. Methods: In total, 329 Flemish secondary school students (55.6% female), aged 11 to 14 years, participated in a 4-hour classroom universal prevention, with a focus on emotion regulation, mental health, and specific strategies to prevent NSSI and reduce stigma. For both the intervention and control group (N = 124), a pre-, post- and one-month follow-up questionnaire was administered, containing reliable and valid measures for NSSI and suicidality, emotion regulation, help-seeking behaviors, well-being, and psychological distress. Results: The prevention program effectively reduced NSSI and psychological distress, particularly for adolescents with a history of NSSI. Conclusions: These findings support previous research on the effectiveness of school-based programs in reducing mental complaints and suggest promising outcomes for NSSI prevention.

System-of-systems (SoS) evolution is a complex and unpredictable process. Although various principles to facilitate collaborative SoS evolution have been proposed, there is a lack of experimental data validating their effectiveness. To address these issues, we present an Agent-Based Model (ABM) for SoS evolution in the Internet of Vehicles (IoV) , serving as a quantitative analysis tool for SoS research. By integrating multiple complex and rational behaviors of individuals, we aim to simulate real-world scenarios as accurately as possible. To simulate the SoS evolution process, our model employs multiple agents with autonomous interactions and incorporates external environmental variables. Furthermore, we propose three evaluation metrics: evolutionary time, degree of variation, and evolutionary cost, to assess the performance of SoS evolution. Our study demonstrates that enhanced information transparency significantly improves the evolutionary performance of distributed SoS. Conversely, the adoption of uniform standards only brings limited performance enhancement to distributed SoSs. Although our proposed model has limitations, it stands out from other approaches that utilize Agent-Based Modeling to analyze SoS theories. Our model focuses on realistic problem contexts and simulates realistic interaction behaviors. This study enhances the comprehension of SoS evolution processes and provides valuable insights for the formulation of effective evolutionary strategies.

Objective: The aim of this in vitro study was to evaluate the accuracy of resin-based fixed dental restorations, namely veneers, single crowns, and four-unit fixed partial dental prosthesis (FPDs) using two different 3D printers and polymer-based materials. Materials and Methods: A standard maxillary polyurethane jaw model containing prepared teeth was scanned using an intraoral scanner. The generated STL data were used to design the restorations virtually using CAD software. Two 3D printers were utilized for the provisional digital light processing and stereolithography for the castable resin patterns. Each printer produced 10 specimens of each type of restoration, for a total of 80 restorations. The 3d-printed restorations were then 3D scanned using the same intraoral scanner and evaluated for external and internal dimensional accuracy in terms of trueness and precision. A one-way ANOVA and Two-sample T-Test were implemented to compute the precision (variability between groups) and trueness (with the designed CAD model). A level of statistical significance of p-Value

Agriculture is an important sector of European Union in societal , economic and environmental dimensions. Sustainability of the sector require improvements in its key operations. Weeding is one of the crucial operation having impact on farms’ productivity, safety for farmers, food security and environmental state. To achieve EU policy goals of sustainable agriculture there are needed new technical and organizational solutions. One of the advanced techniques are laser based weeding technique. It is important to understand well the impacts of introduction of these tech-niques to the markets and agricultural practice in sustainability context. For that reason Social Life Cycle Assessment was performed. The method was based on participatory approach. The as-sessment was carried in three perspectives: general society, farmers, and business perspective re-lated to agriculture. Expert interviews based on questionnaires and workshops were realized to get the opinions on the impacts of a new laser technique on particular aspects of its implementation. The results show generally positive impact in all perspectives, especially in the perspective of farmers.

Background: This study aimed to develop and evaluate a dietary self-care promotion program for hemodialysis patients based on Hurley's self-efficacy model. Methods: The needs of hemodialysis patients were identified, and an online community-based dietary self-care promotion program was developed with expert evaluations. 44 hemodialysis patients were randomly assigned to an experimental group (n=22) and a control group (n=22). The program was applied to the experimental group for four weeks. Before and after the intervention, as well as four weeks after the intervention, dietary self-efficacy, dietary self-care behavior, interdialytic weight gain, serum phosphorus, and serum potassium were assessed in both groups. Results: Significant differences over time and between groups were observed in dietary self-efficacy, interdialytic weight gain, serum phosphorus, and serum potassium. The interaction between time and group was also significant. While no significant differences were found over time in dietary self-care behavior, significant group differences and interaction effects between time and group were identified. Conclusions: The results indicate that the dietary self-care promotion program using an online community for hemodialysis patients is more effective in enhancing dietary self-efficacy and dietary self-care behavior compared to conventional treatment. This suggests the clinical applicability of the proposed dietary self-care promotion program.

Treatment wetlands (TWs) are Nature-Based Solutions increasingly used worldwide for wastewater (WW) treatment able to remove mineral and organic pollutants through both physical and biochemical process. Besides the reusable effluent, the TWs produce as main output plant biomass that need to be harvested and disposed at least once a year with significant management costs and TW temporary out of service. This study aims (i) to evaluate the potential of TWs biomass for local energy production and (ii) to understand TW hydraulic conductivity (Ks) effects on the biomass biomethane yield. Specifically, it was addressed by determining the Biochemical Methane Potential of common reed (CR) (Phragmites australis) samples collected at three harvest times from the 10-years-old horizontal subsurface treatment wetland (HSTW) used as a secondary WW treatment system for the IKEA® store located in Catania (Eastern Sicily, Italy). Furthermore, the falling head test was conducted to assess the hydraulic conductivity (Ks) variation in the HSTW, in order to understand the influence on the CR biomethane production. Average methane content values were 130.57 Nm3CH4/tVS (±24.29), 212.70 Nm3CH4/tVS (±50.62) and 72.83 Nm3CH4/tVS (±23.19) in August, September, October 2022, respectively. Ks was correlated with both dry matter (R2 = 0.58) and fiber content (R2 = 0.74) and, consequently, affected the biomethane yield that increased at the Ks increases (R2 = 0.30 in August, R2 = 0.57 in September). In the framework of a circular economy, results showed the successfully possibility of integrating the bioenergy production into TWs. The research could contribute (i) to encourage plant operators to reuse biomass from TWs for local energy production and (ii) to help plant operators to understand Ks effects on the biomass biomethane yield, in order to increase the sustainability of the system and to reduce the maintenance costs.

Large-scale crowd phenomena are complex to model because the behaviour of pedestrians needs to be described at both strategic, tactical, and operational levels and is impacted by the density of the crowd. Microscopic models manage to mimic the dynamics at low densities, whereas mesoscopic models achieve better performances in dense situations. This paper proposes and evaluates a novel agent-based architecture to enable agents to dynamically change their operational model based on local density. The ability to combine microscopic and mesoscopic models for multi-scale simulation is studied through a use case of pedestrians at the Festival of Lights, Lyon, France. Pedestrian outflow data is extracted from video recordings of exiting crowds at the festival. The hybrid model is calibrated and validated using a genetic algorithm that optimizes the match between simulated and observed outflow data. Additionally, a local sensitivity analysis is then conducted to identify the most sensitive parameters in the model. Finally, the performance of the hybrid model is compared to different models in terms of density map and computation time. The results demonstrate that the hybrid model has the capacity to effectively simulate pedestrians across varied density scenarios while optimizing computational performance compared to other models.

In an IoT system, the sheer volume of data generated by numerous sensing devices necessitates a well-designed scheme for storing and retrieving data efficiently, enabling streamlined data processing and analytics. One promising storage architecture involves utilizing solid-state drives (SSDs) to cache data from hard disk drives (HDDs), thereby creating an SSD-based caching storage system. To further enhance access performance, it is possible to employ readahead techniques to minimize data access latency. However, the existing Linux readahead scheme falls short in fully leveraging SSD-based caching storage systems. We address this limitation by introducing a novel cross-layered readahead architecture that effectively communicates with the VFS layer, the file system layer, and the block I/O layer. This communication facilitates the acquisition of readahead timing, readahead data continuity, and readahead data location, respectively. To guide prefetching decisions, our architecture analyzes the degree of data access sequentiality, the performance model of the target storage device, and the access patterns of the I/O workload on the corresponding storage device. The implementation of this new architecture in the Linux kernel yields promising experimental results, demonstrating its robustness by consistently outperforming the stock Linux kernel. Notably, our architecture reduces the total execution time of the stock Linux kernel by up to 49%, except in cases of random workloads where both the stock Linux kernel and our architecture exhibit similar performance.

Plantation-based farmer cooperatives play an important role in promoting agricultural modernization and increasing farmer income, and the management of business risks of such cooperatives not only influences the development of the cooperatives themselves, but also concerns the interests of farmers. Based on the survey data of 226 sample cooperatives from Guizhou province, this article uses factor analysis to measure business risks of plantation-based farmer cooperatives and carries out empirical tests on influence factors of business risks through structural equation model. According to the research results, the ordering of business risks of plantation-based farmer cooperative based on their significance is as follows: market risk > policy risk > natural risk > technical risk > management risk. Influence factors including policy environment, economic environment, social service environment, technical environment, resource endowment of the cooperative and manager characteristics have significant positive influence on the cooperative, with economic environment and manager characteristics generating relatively stronger influence and social service environment generating relatively weaker influence. Through this research, several policy implications on driving high-quality development of plantation-based farmer cooperative are made, including specifying supportive policies of plantation-based farmer cooperative, improving economic environment of agricultural market, upgrading agricultural infrastructure, depending reform of land transfer system, and enhancing internal management of the cooperative.

The objective of this study is to evaluate how two varying amounts of sepiolite-based powder, infused with indigo extract, affect the appearance and durability of a water-based white primer. To examine the influence of this eco-friendly pigment on the coatings' overall appearance, assessments were performed for color, gloss, and surface roughness. Additionally, the coatings were investigated through optical and electron microscopic observations, to evaluate the distribution of the pigment within the polymer matrix. The effect of the pigment on the coating's durability was assessed through accelerated tests, including exposure in a salt spray chamber and a UV-B chamber. These tests aimed to evaluate the emergence of defects and changes in the appearance of the samples over time. Furthermore, the impact of different quantities of sepiolite-based powder on the coating's ability to act as a barrier was assessed using liquid resistance tests and contact angle measurements. These evaluations aimed to understand how the coating responded to various liquids and its surface properties concerning repellency or absorption. In essence, this study underscores the considerable influence of the eco-friendly pigment, demonstrating its capacity to introduce unique color and texture variations to the paint. Moreover, the inclusion of the pigment has enhanced the coating's color stability, its ability to act as a barrier, and overall durability when exposed to harsh environments.

In this research, we present the first steps taken towards a data-driven agent-based model (ABM) specifically designed for simulating infectious disease dynamics in Greece. Amidst the ongoing COVID-19 pandemic caused by SARS-CoV-2, this research holds significant importance as it can offer valuable insights into disease transmission patterns and assist in devising effective intervention strategies. To the best of our knowledge, no similar study has been conducted in Greece. We constructed a prototype ABM that utilizes publicly accessible data to accurately represent the complex interactions and dynamics of disease spread in the Greek population. By incorporating demographic information and behavioral patterns, our model captures the specific characteristics of Greece, enabling accurate and context-specific simulations. By using our proposed ABM, we aim to assist policymakers in making informed decisions regarding disease control and prevention. Through the use of simulations, policymakers have the opportunity to explore different scenarios and predict the possible results of various intervention measures. These may include strategies like testing approaches, contact tracing, vaccination campaigns, and social distancing measures. Through these simulations, policymakers can assess the effectiveness and feasibility of these interventions, leading to the development of well-informed strategies aimed at reducing the impact of infectious diseases on the Greek population. This study is an initial exploration toward understanding disease transmission patterns and a first step towards formulating effective intervention strategies for Greece.

Rapid haemostasis during surgery is essential when one wants to reduce the duration of opera-tions, reduce the need for transfusions, and above all when one wants to achieve better patient management. The use of haemostatic agents, sealants and adhesives improves the haemostatic process by offering several advantages, especially in vascular surgery. These agents vary widely in their mechanism of action, composition, ease of application, adhesion to wet or dry tissue, im-munogenicity and cost. The most used are cyanoacrylate-based glues (Glubran 2) or polysaccharide hydrogel-microsphere powder (AristaTMAH). This work is based on a retrospective study carried out on a sample of patients with different vascular diseases (FAV, pseudoaneurysm and PICC application) in which two different haemostatic sealants were used. The aim was to assess the safety, the advantages and the ability of both sealants to activate the haemostatic process at the affected site, also in relation to their chemical-physical characteristics. The obtained results showed that the application of Glubran 2 and AristaTMAH as surgical wound closure systems is effective and safe as the success achieved was ≥94% on anastomoses of FAV; 100% on stabilization of Picc catheters; ≤95% on pseudoaneurysms.

The study aims to evaluate the Quorum Sensing (QS) system inhibition against some Gram-positive and Gram-negative bacteria detected by molecular modeling of R. cathartica L. plant extract. R. cathartica L. methanol extract was evaluated in vitro. The research was carried out for the possible role and mechanism of R. cathartica L. The antibacterial activity of R. cathartica L. seed extract on some Gram-positive and Gram-negative strains was evaluated using culture-based and computational analysis. Gentamicin (CN; 30 µg/ml, Bioanalyse) was used as an antibacterial control of the extract on the production potential of QS-dependent virulence factors on Pseudomonas aeruginosa PAO1 was investigated. Phytochemical analysis resulted in the identification of 23 phenolic phytochemicals. R. cathartica L. extract was observed to have antimicrobial activity against Gram-positive and Gram-negative bacteria at different rates (11.3 mm-16 mm). The inhibitory effect of R. cathartica L. extract on P. aeruginosa PAO1 (elastase 61%, pyocyanin 18%, and biofilm 61%) was recorded moderately. Phytochemical analysis revealed that the main component of the extract is kaempferol. Therefore, the binding potential of kaempferol on QS system receptors was investigated via molecular docking. Computational analysis showed that kaempferol can inhibit the QS system by preventing competitive ligands from connecting to LasR. This study explored the activity and mechanism of action for a new green alternative against resistance. might provide a mechanism for R. cathartica L. seed extract components and thus provide a new avenue for using R. cathartica L. seed extract as a green antibacterial agent.

3D printing with earth-based mortar is still under development and faces challenges. Optimizing the mortar mixture, improving structural strength, determining the relationship between printing speed and the amount of extruded material, and ensuring long-term durability are areas that are still being refined. Additionally, regulatory and certification issues must also be considered to ensure the safety and compliance of 3D printed structures. This paper presents for discussion the records, analyses, studies, and considerations regarding the initial initiatives involving 3D printing with the extrusion of earth-based mortar developed at the Faculty of Engineering of the University of Porto - FEUP. Through this work, it is possible to strengthen and reaffirm that 3D printing with earth-based mortar has significant potential in the construction industry and that the incorporation of dispersed kraft paper fibres from the recycling of cement bags is an excellent resource to achieve good constructability in 3D printing with earth-based mortar.

This paper presents an approach to teacher identity heritage as result of the implementation of a research device created through Arts-based Research (ABR) methods, specifically with video elicitation and video essay used as research tools. Two main objectives were raised. The first one, to establish the real relevance of focusing performance on teacher identity. The second one, testing a new methodological proposal specifically designed for this purpose, but still useful in other contexts where heritage identity is as present as in teaching. The device, Body-camera, involves a process that allows new ways to understand the creation of identities using video to encourage the production of new meanings by visual and oral data. The participants were teachers in training during their internship period. Some notions about teachers' identity heritage were revealed, and also preserved, firstly, through personal perspectives by video elicitations and secondly, through collective perspectives by video essays. Both are video structures used in ABR which mix creative experience, memories, life experiences, relationships and links that shape the teachers’ professional identity.

LR004 is a novel chimeric (human/mouse) monoclonal antibody developed for the treatment of advanced colorectal carcinoma with detectable epidermal growth factor receptor (EGFR) expression. We aimed to investigate the preclinical pharmacokinetics (PK) and in vivo biodistribution of LR004. The PK profiles of LR004 were initially established in rhesus monkeys. Subsequently, 125I radionuclide-labeled LR004 was developed and its binding activity to the EGFR antigen were evaluated. Furthermore, the biodistribution, autoradiography, and NanoSPECT/CT of 125I-LR004 in xenograft mice bearing A431 tumors were examined. The PK data revealed a prolonged half-life and nonlinear PK characteristics of LR004 within the dose range of 6–54 mg/kg. The radiochemical purity of 125I-LR004 was approximately 98.54%, and iodination of LR004 did not affect its specific binding activity to the EGFR antigen. In a classical biodistribution study, 125I-LR004 exhibited higher uptake in highly perfused organs than in poorly perfused organs. Prolonged retention properties of 125I-LR004 in tumors were observed at 4 and 10 days. Autoradiography and NanoSPECT/CT confirmed the significant accumulation and sustained retention of 125I-LR004 at the tumor site in xenograft mice. These findings demonstrated the adequate tumor targeting capabilities of 125I-LR004 in EGFR-positive tumors, which may improve dosing strategies and future drug development.

Since sensor-based perception systems are used in autonomous vehicle applications, validating such systems is imperative to guarantee the robustness of the systems before they are being put to use. In this study, a comprehensive corruption-related simulation-based robustness verification and enhancement process for sensor-based perception systems is proposed. Firstly, we present a methodology and scenario-based corruption generation tools for creating diverse simulated test scenarios that can analogously represent real-world traffic environments, especially considering corruption types related to safety concern. Then, an effective corruption similarity filtering algorithm is proposed to remove corruption types with high similarity and identify the representative corruption types to represent all considered corruption types. As a result, we can generate efficient corruption-related robustness test scenarios with less testing time and good scenario coverage. Subsequently, we perform the vulnerability analysis of object detection models to identify model weaknesses and construct an effective training dataset for model vulnerability enhancement. This enhances the tolerance of object detection models to weather and noise-related corruptions, ultimately improving the robustness of the perception system. We employ case studies to demonstrate the feasibility and effectiveness of the proposed robustness verification and enhancement procedures. Additionally, we explore the impact of different "similarity overlap threshold" parameter settings on scenario coverage, effectiveness, scenario complexity (size of training and testing datasets), and time costs.

Water scarcity challenges have necessitated the adoption of water-saving techniques in protected and nom-protected farming. This study aimed to assess the performance of a water-saving soil-less cultivation technique and to compare it with conventional soil-based cultivation in protected farming. The soilless technique used local gravel and a mixture of peat-moss, humin-substrate, and perlite in ratios of 4:3:1.5. Three irrigation regimes were imposed using emitters 8Lh-1 design discharge (D1) emitters with 6Lh-1 design discharge (D0.75) and 4Lh-1 de-sign discharge (D0.5) for the two cultivation methods during the growth cycle of tomato by drip irrigation. The vegetative growth, fruit yield and water consumption were measured and water productivity was determined. Moreover, an economic assessment was carried out by estimating and comparing economic coefficients for the two cultivation methods. Estimated coefficients include revenues, net profit, benefit-cost ratio, break-even levels of production and prices, revenues over variable cost, and revenues on investment. The tomato fruit yield under soil-based cultivation overtopped the yield under soilless cultivation. The water productivity under the soilless cultivation was almost twice that (24.3 kg m-3) of the soil-based cultivation (15.5 kg m-3). The soilless cultivation saved 50% of irrigation water applied by the conventional soil-based method, saving energy and soil from deterioration. Revenues and net profits stimulated by higher yield coupled with lower variable cos supported the soil-based cultivation. The economic assessment showed that both cultivation methods were economically viable. However, the soil-based cultivation method was more profitable due to its higher fruit yield. Overall, the results of this study suggest that the soilless cultivation technique is a viable option for wa-ter-saving cultivation. However, the soil-based cultivation method is still more profitable due to its higher fruit yield

This work introduces an innovative approach that unites a PIDND2N2 controller and the balanced arithmetic optimization algorithm (b-AOA) to enhance the stability of an automatic voltage regulator (AVR) system. The PIDND2N2 controller, tailored for precision, stability, and responsiveness, mitigates the limitations of conventional methods. The b-AOA optimizer is obtained through integration of pattern search and elite opposition-based learning strategies into the arithmetic optimization algorithm. This integration optimizes the controller parameters and the AVR system's response, harmonizing exploration and exploitation. Extensive assessments, including evaluations on 23 classical benchmark functions, demonstrate the efficacy of the b-AOA. It consistently achieves accurate solutions, exhibits robustness in addressing a wide range of optimization problems, and stands out as a promising choice for various applications. In terms of AVR system, comparative analyses highlight the superiority of the proposed approach in transient response characteristics, with the shortest rise and settling times and zero overshoot. Additionally, the b-AOA approach excels in frequency response, ensuring robust stability and a broader bandwidth. Furthermore, the proposed approach is compared with various state-of-the-art control methods for the AVR system, showcasing impressive performance. These important results underscore the significance of this work, setting a new benchmark for AVR control by advancing stability, responsiveness, and reliability in power systems.

3D human pose estimation has made significant advancements through the integration of deep learning techniques. This survey provides a comprehensive review of recent 3D human pose estimation methods, with a focus on monocular images, videos, and multi-view cameras. Our approach stands out through a systematic literature review methodology, ensuring an up-to-date and meticulous overview. Unlike many existing surveys that categorize approaches based on learning paradigms, our survey offers a fresh perspective, delving deeper into the subject. For image-based approaches, we not only follow existing categorizations but also introduce and compare significant 2D models. Additionally, we provide a comparative analysis of these methods, enhancing the understanding of image-based pose estimation techniques. In the realm of video-based approaches, we categorize them based on the types of models used to capture inter-frame information. Furthermore, in the context of multi-person pose estimation, our survey uniquely differentiates between approaches focusing on relative poses and those addressing absolute poses. Our survey aims to serve as a pivotal resource for researchers, highlighting state-of-the-art deep learning strategies and identifying promising directions for future exploration in 3D human pose estimation.

This study aims to evaluate the combined assimilation of AGRI infrared radiance and ground-based MWR (Microwave Radiometer) data for predicting short-duration heavy rainfall. The WRFDA 4.3 framework is utilized to establish the data assimilation interface. The structural characteristics of this joint assimilation approach are analyzed using a typical heavy rainfall event in the Kaifeng region of Central China. The findings indicate the following: (1) The joint assimilation of FY-4A AGRI and ground-based MWR data effectively corrects the initial moisture content in model simulations. Data assimilation significantly improves the simulation of 24-hour accumulated rainfall. Furthermore, the joint assimilation of AGRI radiance and MWR data outperforms assimilating either of them individually; (2) In the heavy rainfall stage, from the low level to the high level, strong upward movement occurs in the center of the rainstorm. The water vapor in the process of this rainstorm mainly comes from the westward air transport in front of the high trough. The water vapor is continuously transported to the heavy rainfall belt through this channel, providing sufficient water vapor for the maintenance of the rainstorm; (3) The combination of the interaction between high and low level vorticity and divergence in the atmosphere and the vertical upward movement, the emergence of low level jet and the generation of unstable energy in the atmospheric environment jointly lead to the occurrence of the rainstorm process; and (4) The terrain-sensitive experiment results show that, the existence of the topography of Taihang Mountain changes the precipitation in Kaifeng area, and reducing the terrain height will lead to a 50%-60% decrease in the overall precipitation of the precipitation center, and the precipitation range will also be greatly reduced. An increase of more than 50% in terrain height will lead to an increase in precipitation center, precipitation range and precipitation intensity, and an increase of 10%-20% in overall precipitation; An increase of more than 75% in the terrain height will cause the rain belt to shift eastward by about 0.5°E, and the precipitation center will shift significantly eastward. When the terrain height increased by more than 100%, the precipitation did not continue to increase, which was basically the same as the control test. This paper provides a valuable basis for further improving the application of FY-4A AGRI radiance and ground-based microwave radiometer in numerical weather models.

Women's attitudes towards domestic violence play an important role in shaping the social acceptance of domestic violence, acting as both a known predictor of victimization and an indicator of disclosure and help-seeking behavior. Therefore, the study objectives were 1) to conduct a nationwide analysis to explore the factors associated with the acceptance of domestic violence among Iraqi women according to the social-ecological framework, and 2) to identify the most vulnerable women according to the spatial distribution of Iraqi governorates. This cross-sectional study was conducted using secondary data analysis from the 2018 Iraq Multiple Indicator Cluster Survey (MICS 6), which included 19,443 married Iraqi women. Logistic regression was employed to examine the factors associated with acceptance of domestic violence. In this study, the analyses were performed according to the Social Ecological Model (SEM). This study revealed that 48.4% of married Iraqi women accepted domestic violence. Yet, women living in South/Central regions of Iraq showed a higher prevalence of domestic violence acceptance namely Anbar, Salahaddin Thiqar, and Misan where the prevalence was (62%-73%). Several factors across the social-ecological model were associated with a higher likelihood of women accepting such behavior, including experiencing functional difficulty, having lower educational attainment, being married to a blood-related husband, and being married to a husband who has multiple wives/partners, living in poverty, residing in rural areas, living in the south and central regions of Iraq, and feeling unsafe in the neighborhood. Conversely, factors that were associated with a lower likelihood of women accepting such behavior were owning a mobile phone and using a computer or tablet. This study provides policymakers with valuable insights to comprehensively assess indicators of attitudes toward domestic violence against women. It also addresses the scarcity of information on the acceptance of domestic violence in Iraq on national and governorate levels, emphasizing the need for urgent national-level policy discussions to achieve key Sustainable Development Goals related to gender equity and good health and well-being.

Coseismic landslides pose significant threats, causing widespread destruction of buildings, roads, pipelines, and leading to numerous casualties. In recent years, the frequency of earthquakes has increased, prompting a growing interest in regional-scale assessment techniques for coseismic landslides. The infinite slope model proposed by Newmark is widely used to evaluate coseismic landslide hazard. However, the infinite slope model fails to reflect the impact of rock mass structure on the stability of slopes. This paper proposes a novel approach for mapping the hazards of coseismic landslides by considering the roughness of the potential slide surfaces in the inner slope. The proposed method is validated using data from the 2013 Lushan earthquake. The datasets, including geological units, peak ground acceleration (PGA), and high-resolution digital elevation models of topography, are rasterized at a grid spacing of 30 meters. They are then combined within an infinite slope model based on Newmark permanent-deformation analysis, enabling the estimation of coseismic landslide displacement in each grid area resulting from the Lushan earthquake. The modeled displacements are compared with the inventory of landslides triggered by the Lushan earthquake, allowing the derivation of a confidence level function that relates predicted displacement to the spatial variation of coseismic landslides. Ultimately, a hazard map of coseismic landslides is generated based on the established confidence level function. This map serves as a valuable tool for predicting the hazard zone of seismic regions and offers essential insights for decision-making related to infrastructure development and post-earthquake construction.

Cyber-Physical Systems (CPS) play an essential role in today’s production processes, leveraging Artificial Intelligence (AI) to enhance operations such as optimization, anomaly detection, and predictive maintenance. This article reviews a cognitive architecture for artificial intelligence, which has been developed to establish a standard framework for integrating AI solutions into existing production processes. Given that machines in these processes continuously generate large streams of data, Online Machine Learning (OML) was identified as a crucial extension to the existing architecture. To substantiate this claim, real-world experiments using a slitting machine were conducted to compare the performance of OML with traditional Batch Machine Learning. The evaluations clearly indicate that OML adds significant value to CPS and is strongly recommeded as an extension of related architectures such as the cognitive architecture for AI discussed in this article. Additionally, surrogate model-based optimization is employed to determine the optimal hyperparameter settings for the corresponding OML algorithms, aiming to achieve peak performance in their respective tasks.

Within an amplicon-based metagenomic study of Archaea, Fungi, and Bacteria in Livingston Island, Maritime Antarctica, in many of the samples antagonisms between these three super kingdoms were observed under the form of an inversely proportional dependence of the richnesses of the three types of microorganisms. This was quantified - based on the observed numbers of the total tags and the numbers of the operational taxonomic units (OTUs), as well as based on four alpha diversity parameters – the Shannon, the Simpson, the Chao1, and the ACE indices. We found that the most discriminative results in the antagonism measuring were observed in the comparison of the numbers of the OTUs and the ACE community richness estimator. The antagonism between Archaea and Fungi was strongest, followed by that of Archaea and Bacteria. The Fungi-Bacteria antagonism was slightly detectable. Pearson and Spearman correlation analysis also showed a statistically significant negative correlation between the fungal and archaeal effective tags, while the correlation between archaeal and bacterial diversity was positive. Indications of the order of primary microbial succession in barren ecological niches were also observed, demonstrating that Archaea and Bacteria are the pioneers, followed by Fungi which in time would displace Archaea.

Background: The target volume for post-mastectomy radiation therapy (PMRT) in breast cancer patients with reconstruction has been a subject of debate. This study aimed to assess the radiation dose distribution and treatment outcomes associated with different chest wall (CW) delineation according to ESTRO ACROP guideline for patients underwent implant-based reconstruction. Methods: We conducted a retrospective review of breast cancer patients who underwent mastectomy followed by two-stage implant-based breast reconstruction and adjuvant radiation therapy (RT) between 2007 and 2022. The expanders/implants were positioned retropectorally. The chest wall target volumes were categorized into two groups: the prepectoral group, which excluded the deep lymphatic plexus, and the whole expander group. Results: The study included 26 patients, 15 in prepectoral group and 11 in whole expander group. No significant differences were observed in normal organs exposure between the two groups. There was a trend toward a lower ipsilateral lung mean dose in the prepectoral group (10.2 vs. 11.1 Gy, p=0.06). Both groups exhibited limited instances of reconstruction failure and local recurrence. Conclusions: For patients undergoing two-stage expander-implant retropectoral breast reconstruction and PMRT, our data have provided comparable outcomes and normal organs exposure for those omitting the deep lymphatic plexus.

This study assesses the impact of incorporating an adaptive learning mechanism into an agent-based model (ABMS) simulating behavior on a university campus during the course of a pandemic outbreak, with a particular case on the COVID-19 pandemic. The aim is to reduce overcrowding and infections on campus through the use of Reinforcement Learning (RL). Our findings indicate that RL is a viable approach for effectively representing agents’ behavior within this context. The results reveal specific temporal patterns of overcrowding violations. While our study successfully mitigated campus crowding, it had limited influence on altering the course of the epidemic. This highlights the necessity for comprehensive epidemic control strategies that consider the role of individual decision-making influenced by adaptive learning, along with the implementation of targeted interventions. This research significantly contributes to our understanding of adaptive learning within complex systems and offers valuable insights for shaping future public health policies in similar community settings. Future research directions encompass exploring various parameter settings and updating representations of the disease’s natural history.

The growing population with changing consumption patterns in developing countries is causing significant challenges with regards to solid waste management. Plastic wastes are particularly problematic, with single-use plastics leaking into the environment, including the marine environment, at an unprecedented rate. Approximately 80 percent of ocean plastics come from land-based sources or about 8 million tons are dumped into the ocean every year. Thailand was identified as one of the top 10 countries ranked by mass of mismanaged plastic wastes, with more than 60,000 tons per year entering the ocean through multiple outlets, including rivers. In the environment, plastic wastes can be degraded into small sizes (less than 5 mm), called microplastics (MPs), which could contaminate the ecosystems and the food chain, including foodstuffs and water supply. Tap water samples collected from a water supply treatment plant and Academic Institutions 1 and 2 in central Thailand were found to contain MPs about 304 ±90, 270 ±109 and 386 ±102 particles/L, respectively. In addition, MPs concentrations of 211 ±70 and 122 ±60 particles/L were also found in drinking water samples collected from commercial bottled water and membrane filtration water, respectively. The MPs sizes of 0-50 µm were most abundant in both the tap and drinking water samples whose shapes were mainly fragments and fiber. These data indicated potential health risks to the people who consume these water sources, and recommendations for health impacts minimization were proposed.

Following on from work already carried out in our laboratory on a new biomass-derived green solvent, eucalyptol, we are now turning our attention to sabinene as a new green solvent. Sabinene is also derived from biomass. We have shown that it can be used as such or distilled to synthesize thiazolo[5,4-b]pyridine heterocycles by thermal or microwave activation. This new solvent was compared with various conventional and green solvents. The conditions were optimized to enable us to carry out the syntheses in good yields, and we were able to show that sabinene, a natural bicyclic monoterpene, could be used effectively as a solvent.

We designed a bidirectional reflection distribution function (BRDF) measurement system to research the characteristics of space target materials. This system measures the BRDF data of an aluminum plate and gold foil. A hybrid biogeography-based optimization-firefly (BBO-Firefly) algorithm was proposed to optimize the five-parameter BRDF model. To check the performance of the hybrid BBO-Firefly algorithm, we set up a contrast experiment to optimize the BRDF parameters using the BBO algorithm, Firefly algorithm, and hybrid BBO-Firefly algorithm. The experimental results prove that the hybrid BBO-Firefly algorithm surpasses the BBO algorithm and Firefly algorithm in convergence speed and precision in the same situation and has a better optimization effect. Finally, we substitute the optimization results of the hybrid BPO-Firefly algorithm into the BRDF model to analyze the reflection characteristics of an aluminum plate and gold foil.

The scope of this paper is to compare different dental sealants and flow materials indicated for sealing pit and fissures considering their chemical formula. The narrative review aims to address the questions: What is the essence of different dental sealants’ activity, how their chemical formula affects their mechanisms of caries prevention and what makes a dental sealant efficient mean of caries prevention. Another vital issue is whether the sealants which contain fluoride, or any other additions have potentially increased antimicrobial properties. Methods: An electronic search of the PubMed, Cochrane, Web of Science and Scopus databases was performed. The following keywords were used: (dental sealants) AND (chemical composition). Additionally, information about composition and indications for clinical use provided by manufacturers were utilized. The review aims are to find crucial elements of sealants’ composition which affect their cariostatic mechanisms.

Self-adaptive systems are capable of reconfiguring themselves while in use to reduce the risks forced by environments for which they may not have been specifically designed. Run-time validation techniques are required because complex Self-adaptive systems must consistently offer acceptable behavior for important services. The run-time testing can offer further confidence that a Self-adaptive system will continue to act as intended even when operating in unknowable circumstances. This article introduces an evolutionary framework that supports adaptive testing for Self-adaptive systems. To ensure that the adaptive systems continue to operate following its requirements and that both test plans and test cases continuously stay relevant to shifting operational conditions. The proposed approach using the SPEA2 algorithm facilitates both the execution and adaptation of run-time testing operations.

Environmental concerns, among other causes, are leading to meat replacement in the diet by healthy, nutritious and tasty foods. Alternative protein sources of plant origin can be an alternative to meat, but their low biological value proteins can be a problem. Novel foods, such as insect meals, can meet currently consumer demands. Therefore, this research has developed innovative prototypes of analogue burgers with animal and vegetable proteins. Concerned about health and allergies, a prototype incorporating soya to satisfy coeliacs was developed. An iterative and heuristic process was carried out to test the product development feasibility. The main raw materials used were insect flour (Tenebrio molitor), seitan and soya. In addition, oat and sodium alginate were used as binders. Shelf-life of the new product was evaluated by physicochemical (pH, aw, moisture, colour, acidity and peroxide index) and sensory analysis (quantitative analysis -QDA-). The production of the burger analogues was feasible. Product characterisation showed significant differences (p < 0.05) among samples for organoleptic properties, highlighting texture changes. Using a multivariate model, it was established “The best before date” at 7 days for all developed prototypes, conditioned by microbial growth. Finally, the spoilage model indicated an important contribution to bacterial growth with a notable modification in the pastiness and hardness of the burger analogues developed.

The notion that ‘Stock-G’ humpback whales off western South America are primarily deep oceanic migrators is poorly supported. We documented 66 land-based sightings from Pucusana, Lima Sur: 18 incidental (2002–2023) and 48 dedicated sightings during the northbound winter migration (June-July 2023), covering respectively 38 and 105 individual whales, despite a mean daily observer effort of only 58.7 min. Estimated distances from shore ranged 20–7,000 m (mean= 2,729 m) at depths 25–99 m, while 50% migrated at < 2,500 m (median) from shore. Several groups skirted the coastline from headland to headland. Of five southbound migrating groups, four included an adult with neonate; no northbound groups enclosed a neonate. Two cases of single juvenile/subadult whales moving multidirectionally and closely associated with large seabird feeding frenzies, were considered foraging also. In 2023, 94% of all northbound nearshore sightings occurred from 14 June-11 July, signalling the maximum threat period for interactions with coastal fisheries off metropolitan Lima. If migration is temporally and spatially predictable, effective mitigating measures should be feasible.

Survivors of sexual and gender-based violence (SGBV) are often hindered in their quest to access quality healthcare. This could complicate the achievement of the laudable SDG Target 3.7. The study used an ethnographic approach to solicit information from health providers, adolescents, and young women (AYW) in 10 communities from Lagos and Ibadan; two major cities in Nigeria. Findings indicated that the structural system of services provided in the health services at the primary healthcare level was limited, which posed a great challenge in AYW’s utilization of services for sexual and gender-based violence (SGBV). Some of the challenges identified by health providers included non-existing counseling services, rehabilitation centers, referral problems, and a lack of training for health providers in handling victims of SGBV. The study provided the context of the health providers’ inadequacy and structural problem of health services in providing comprehensive support services to victims of SGBV like adolescents and young women in the slum setting. This poses a barrier to the utilization of services by the survivors. Necessary inclusive services that will meet the need of the victims of SGBV should be in place at primary healthcare centers close to the people in the community for accessibility.

This study investigates the influence of the porous structure, on the density and the mechanical behaviour of new foam concretes incorporating hemp shives. A total of eight batches of foam concretes were manufactured and tested, made with a protein-based foam agent, containing cement, ground granulated blast furnace slag and Metakaolin as binder and hemp shives as natural aggregate. The effect of several parameters is studied, elaboration method (direct and preformed), amount of pozzolanic additions (0% and 30%) and incorporation of hemp shives (5 and 15 vol%) on the resulting physical properties, microstructure, porous structure and mechanical behaviour of the concretes. Hemp shives incorporation results in increased concrete porosity and air bubble radius, decreased uniformity and mechanical strength, and lower cohesion with the cement matrix compared to standard concretes.

This work aimed to develop an easy-to-use smartphone-based electrochemical biosensor to quickly assess coffee blend's total polyphenol (Phs) content at industrial and individual level. The device is based on a commercial carbon-based screen-printed electrode (SPE) modified with multi-walled carbon nanotubes (CNTs) and gold nanoparticles (GNPs). At the same time, the biotransducer, Laccase from Trametes versicolor, TvLac, was immobilized on the sensor surface by using glutaraldehyde (GA) as cross-linking agent. The platform was electrochemically characterized to ascertain the influence of the SPE surface modification on its performance. The working electrode (WE) surface morphology characterization was obtained by scanning electron microscopy (SEM) and Fourier-transform infrared (FT-IR) imaging. All the measurements were carried out with a micro-potentiostat Sensit Smart by PalmSens connected to a smartphone. The developed biosensor provided a sensitivity of 0.12 μA/μM, a linear response ranging from 5 to 70 μM, and a lower detection limit (LOD) of 2.99 μM. Afterwards, the biosensor was tested for quantifying the total Phs content in coffee blends, evaluating the influence of both the variety and the roasting degree. The smartphone-based electrochemical biosensor performance has been validated though the Folin-Ciocâlteu standard method.

Cells are influenced by several biomechanical aspects of their microenvironment, such as substrate geometry. According to the literature, substrate geometry influences the behavior of muscle cells; in particular, the curvature feature improves cell proliferation. However, the effect of the substrate geometry on the myogenic differentiation process is not clear and needs to be further investigated. Here, we show that the 3D co-printing technique allows the realization of substrates. To test the influence of the co-printing technique on cellular behavior we realized linear polycaprolactone substrates with channels in which a fibrinogen-based hydrogel loaded with C2C12 cells was deposited. Cell viability and differentiation were investigated up to 21 days in culture. The results suggest that this technology significantly improves the differentiation at 14 days. Therefore, we investigate the substrate geometry influence by comparing three different co-printed geometries – linear, circular, and hybrid structures (linear and circular features combined). Based on our results, all structures exhibit optimal cell viability (&gt; 94%) but the linear pattern allows to increase the in-vitro cell differentiation, in particular after 14 days of culture. This study proposes an endorsed approach for creating artificial muscles for future skeletal muscle tissue engineering applications.

All solar thermal systems, due to their thermal nature, can be hybridised or operated with both fossil fuel and solar energy. By enhancing availability and dispatch ability, hybridization has the potential to boost the value of concentrating solar thermal technology. Hybrid photovoltaic thermal systems (PV/T) offer a solution to improve on the limited capacity growth seen with standard solar panels. The analysis focuses on the creation of alternative structural and design so-lutions that may be used to boost lacking efficiency that was previously hampered by limited spectrum absorption of sun light. As a result, the spectrum is separated into two spectrum ranges, one that directly matches the bandgap of PV materials and the other that is absorbed for thermal absorption outputs. Most two channel systems are used to capture or reflect sunlight, with the layer specifically located right above the PV cell. Another layer of nanofluid is employed to evacuate heat from the PV cell, acting as the second channel, to specifically eliminate overheating difficulties. To address concerns that have arisen as a result of years of observation, the most recent study involves nano-particle-based fluids employed in PV/T, which uses a cooling medium to provide an alternate heat transfer option. Aside from nanofluids, there are phase change materials, channel alterations that result in a higher flow rate and hence improve overall performance.

Evidence-based data for endometriosis management are limited. Experiments are excluded without adequate animal models. Data are limited to symptomatic women and occasional observations. Hormonal medical therapy cannot be blinded if recognised by the patient. Randomised controlled trials are not realistic for surgery since a variable disease with low numbers. Each diagnosis and treatment is an experiment with an outcome and experience is Bayesian updating from the past. If the experience of many is similar, this has more value than an opinion. The combined experience of a group of endometriosis surgeons was used to discuss problems in the management of endometriosis. Considering endometriosis as several genetically/epigenetically different diseases is important for medical therapy. Imaging cannot exclude endometriosis and diagnostic accuracy is limited for superficial lesions, deep lesions, and cystic corpora lutea. Surgery should not be avoided for emotional reasons. Shifting infertility treatment to IVF without considering fertility surgery is questionable. The concept of complete excision should be reconsidered. Surgeons should introduce quality control and teaching should move to explain why it is done. The perception of information has a personal bias. These are the major problems in the management of endometriosis identified by the combined experience of endometriosis surgeons.

There is an international concern for reducing energy consumption and protecting the environment in the construction industry. The energy efficiency of a building depends on the thermal resistance of concrete, and utilizing concrete products with elevated thermal resistance can enhance this aspect. This study analyzes the impact of perlite, as an addition, on the physico-mechanical properties of concrete, with the aim of identifying perlite concrete products that will respond to the improvement of the heat transfer resistance of the building envelope. The study examines the effect of replacing different amounts of concrete aggregates with perlite in percentages of 10%, 20%, 30%, and 100%. The results show that substituting sand with perlite improves the thermal performance of concrete, but its mechanical properties are negatively affected. The research carried out highlighted that perlite can be successfully introduced in the production of concrete blocks used for external non-bearing wall panels, the outstanding feature being the reduction of energy consumption in buildings. Overall, the paper identifies an efficient and environmentally friendly way of using perlite in the construction industry, enhancing the energy efficiency of buildings while minimizing the environmental footprint caused by the construction industry.

Animal welfare assessment protocols are important for identifying welfare problems in conservation programs. This study aimed to develop a baseline welfare protocol for the assessment of welfare in huemul (Hippocamelus bisulcus) in conservation centers. This protocol is based on the Welfare Quality® (WQ) framework for cattle, considering the available literature on the behaviours, ecology, conservation plans, captive management of this species, and welfare assessment protocols for other ungulate species. As a result, the protocol was specifically developed for huemuls and included four principles, 12 criteria, and 23 animal- and resource-based indicators. The 12 criteria of the WQ protocol were reduced to nine, and three new criteria were added because they were both feasible and essential for welfare assessment in captive huemuls. This protocol is mainly intended to identify welfare problems in endangered species in the context of conservation centers (reproduction, rescue, rehabilitation, or treatment centers). Thus, aggregation of different measures to obtain a global score has not been proposed. However, a scoring system that assigns a value on a 0-2 scale (0= No welfare concern; 1= welfare concern; 2= urgent welfare concern) is proposed for each category. Although further research is still needed to fully validate the protocol, this is the first development of a completed protocol for huemul welfare assessment.

High-precision ground point cloud data has a wide range of applications in various fields, and the separation of ground points from non-ground points is a crucial preprocessing step. Therefore, designing an efficient, accurate, and stable ground extraction algorithm is of great significance for improving the processing efficiency and analysis accuracy of point cloud data. The study area in this article was a Park in Guilin, Guangxi, China. The point cloud was obtained by utilizing the UAV platform. In order to improve the stability and accuracy of the Filter algorithm, this article proposed a triangular grid filter based on Slope Filter, found violation points by the spatial position relationship within each point in the triangulation network, improved KD-Tree-Based Euclidean Clustering, and applied it to the non-ground points extraction, this method has good accuracy, stability and achieves good results in separating ground points from non-ground points. At first, using Slope Filter to remove some non-ground points, to reduce the error of taking ground points as non-ground points; Secondly, established a triangular grid based on the triangular relationship between each point, the violation-triangle can determin through the grid, and then the corresponding violation points were found in the violation-triangle; Thirdly, according to the three-point collinear method to extract the regular points, used these points to extract the regular landmarks by KD-Tree-Based Euclidean Clustering and Convex Hull Algorithm; Finally, removed disperse points and irregular landmarks by Clustering Algorithm. In order to confirm the superiority of this algorithm, this article compared the filter effects of various algorithms on the study area and filtered the 15 sample data provided by ISPRS, and obtained an average error of 3. 46%. The results showed that the algorithm in this article have a high processing efficiency and accuracy, which can greatly improve the processing efficiency of point cloud data in practical applications.

Nanotechnology and polymer engineering are steering towards a new development to invade deleterious mysteries. In the last few decades, polymer engineering has grabbed researchers’ attention and similarly, polymeric network-engineered structures have been vastly studied. Prior to therapeutic application, early and quick detection analyses are critical. Therefore, developing nanoscale sensors to manage the acute expression of feeble states and malignancies to draw therapeutic lines demands advanced nanoengineering. In spite of nano-therapeutics have emerged as an alternative approach to tackling strenuous diseases. Also, studies have shown highly biocompatible biomedical engineering has emerged with sheer progression. Moreover, hydrogels have emerged as a three-dimensional (3D) polymeric network that consists of hydrophilic natural or synthetic polymers. The resemblance of hydrogels with tissue structure makes it more unique to study inquisitively. Preceding studies have shown a vast spectrum of synthetic and natural polymer deployment in the field of biotechnology and molecular diagnostics. This review explores recent studies on synthetic and natural polymer engineered hydrogel-based biosensors and their applications in multipurpose diagnostics and therapeutics. We reviewed the latest studies on hydrogel-engineered biosensors, exclusively DNA-based and DNA hydrogels fabricated biosensors.

: Consumption of plant-based milk replacers has increased in recent years due to health benefits, benefits attributed mainly to the content of phenolic compounds, fatty acids, or bioactive compounds with antioxidant activity. In this context, we proposed to obtain two types of less studied plant-based beverages, namely lupine and chickpea beverages, as well as the possibility of getting these beverages using germinated seeds and even obtaining probiotic drinks through fermentation with Lactobacillus plantarum 299v. To evaluate the quality of the obtained products, we determined their content of proteins, fatty acids, organic acids, volatile compounds, and phenolic compounds. We evaluated the antioxidant activity of the obtained herbal drinks, and a load of probiotic microorganisms present after the fermentation process. Both lupine and chickpea drinks have the desired properties, high content of fatty acids and phenolic compounds, that bring probiotic benefits.

Polymeric wet-strength agents are important additives used in the paper industry to improve the mechanical properties of paper products, especially when they come in contact with water. These agents play a crucial role in enhancing the durability, strength, and dimensional stability of paper products. The aim of this review is to provide an overview of the different types of wet-strength agents available and their mechanisms of action. We will also discuss the challenges associated with the use of wet-strength agents and the recent advances in the development of more sustainable and environmentally friendly agents. As the demand for more sustainable and durable paper products continues to grow, the use of wet strength agents is expected to increase in the coming years.

3D point cloud classification tasks have been a hot topic in recent years. Most existing point cloud processing frameworks lack context-aware features due to the deficiency of sufficient local feature extraction information. Therefore, we design an augmented sampling and grouping (ASG) module to efficiently obtain fine-grained features from the original point cloud. In particular, this method strengthens the domain near each centroid and makes reasonable use of the local mean and global standard deviation to mine point cloud’s local and global features. In addition to this, inspired by the transformer structure UFO-ViT in 2D vision tasks, we first try to use a linearly-normalized attention mechanism in point cloud processing tasks, investigating a novel transformer-based point cloud classification architecture UFO-Net. An effective local feature learning module is adopted as a bridging technique to connect different feature extraction modules. Importantly, UFO-Net employs multiple stacked blocks to better capture feature representation of the point cloud. Extensive ablation experiments on public datasets show that our method outperforms other state-of-the-art methods. For instance, our network performed with 93.7% overall accuracy on the ModelNet40 dataset, which was 0.5% higher than PCT. Our network also archived 83.8% overall accuracy on the ScanObjectNN dataset, which is 3.8% better than PCT.

A growing number of health conscious consumers are looking for animal protein alternatives with similar texture, appearance, and flavor. There has been a lot of interest in meat analogs as potential meat substitutes. However, research and development still needs to find any alternative non-meat materials. The objective of the current research was to develop fungi minced meat alternative (FMMA) from edible mushrooms. Pleurotus Sajor-caju (SC) was used as the starting material. SC mushroom was selected for starting materials based on high protein content (41.99%.) and sensory attributes. Chickpea flour was used to improve the textural properties by mixing with SC mushroom at a ratio of 0:50, 12.5:37.5, 25:25, 37.5:12.5, and 50:0 (w/w). Textural and sensory attributes suggest that SC mushroom to chickpea at a ratio of 37.5:12.5, shows higher acceptability of FMMA with the protein content up to 47%. Beetroot extract 0.2% (w/w), and 5% (w/w) canola oil showed the most acceptable color parameters and consumer acceptability. This research suggested that SC mushroom with 12.5% chickpea flour, 0.2% beetroot extract and 5% canola oil could be suitable ingredients for the mushroom-based FMMA.

Topological indices are invariant numerical fields of a graph that give facts about the structure of graphs and are found to be very helpful in predicting the physical properties of aluminophosphates. The characteristics of the aluminophosphates are similar to those of zeolites. Two examples of current applications are natural gas dehydration and humidity sensor. New frameworks are being synthesised by researchers in chemistry and materials science. There are many layers and holes in these substances. In this study, Vertex version of distance-based topological indices, the entropy of topological indices and their numerical analysis are explained.

CD39 is involved in adenosine metabolism through conversion of extracellular ATP to adenosine. Because extracellular adenosine plays a critical role in the immune suppression of tumor microenvironment, the inhibition of CD39 activity by monoclonal antibodies (mAbs) is one of the important strategies for tumor therapy. In this study, we developed specific and sensitive mAbs for mouse CD39 (mCD39) using the Cell-Based Immunization and Screening (CBIS) method. The established anti-mCD39 mAbs, which were established by the CBIS method including C₃₉Mab-1 (rat IgG_2a, kappa) and C₃₉Mab-2 (rat IgG_2a, lambda), reacted with not only mCD39-overexpressed Chinese hamster ovary-K1 (CHO/mCD39) but also endogenously mCD39-expressed cell lines, such as L1210 (mouse lymphocytic leukemia) and J774-1 (mouse macrophage-like) cell lines through flow cytometry. Kinetic analyses using flow cytometry indicated that the dissociation constant (K_D) of C₃₉Mab-1 and C₃₉Mab-2 for CHO/mCD39 was 7.3 × 10⁻⁹ M and 5.5 × 10⁻⁹ M, respectively. K_D of C₃₉Mab-1 and C₃₉Mab-2 for L1210 was 3.3 × 10⁻⁹ M and 3.6 × 10⁻¹⁰ M, respectively. Furthermore, C₃₉Mab-1 could detect the lysate of CHO/mCD39 by western blot analysis. These results indicate that C₃₉Mab-1 and C₃₉Mab-2 are useful for the detection of mCD39 in many functional studies.

Residents’ perceptions on ecosystem services (ESs) provided by urban green spaces (UGSs) are vital for developing sustainable cities. However, there has been limited research on this issue in Malaysia. The aim of this paper is to assess Malaysians’ perceptions on ESs provided UGSs and how their perceptions are influenced by different socio-demographic factors. We used a structured online questionnaire and obtained 645 responses on 16 ESs from regulatory, cultural, and supporting ES categories. Descriptive statistics and binary logistic regressions were used for data analysis. In general, city dwellers have high positive perceptions on ESs provided by UGSs. Their perceptions for global climate regulation, noise buffering, pest regulation, spiritual, and research and education services would likely to significantly increase as they grow older. Households with moderate income have significantly greater perceptions of microclimate regulation, air filtration and aesthetic services. Having non-tertiary level education would significantly lower their perceptions of global climate and microclimate regulation, spiritual, aesthetics, and recreational services. Tertiary educated residents with non-environmental degrees also showed similar associations. Infrequent visits to UGSs would likely to significantly reduce the perception of global climate regulation, noise buffering, runoff reduction, erosion control, spiritual, and aesthetics services. People living far (>5km) from the UGSs also have significantly lower perceptions of microclimate regulation, air filtration services. Suggestions are made to incorporate ESs related content in pre-university curriculum and establishing small parks in neighborhoods to improve knowledge and uses of UGSs. These findings would assist urban planners designing environmentally sound urban policies and thereby improving human wellbeing in the cities.

Altered expression of microRNAs (miRNAs) after spinal cord injury (SCI) has been described as being responsible for the main secondary responses, such as apoptosis. X-linked inhibitor apoptosis protein (XIAP) is a key apoptotic component involved in the progression of apoptotic programmed cell death. Several regulators have been described to modulate the XIAP's function, including the post-transcriptional regulator's miRNAs. The main aim of the present work is to identify miRNAs with altered expression after SCI which can regulate XIAP expression. Our bioinformatic analyses identified several candidate miRNAs that may regulate XIAP, among which miR-199a-5p may be involved in the downregulation of XIAP after SCI. Gene reporter assays and in vitro analyses in the neural C6 cell line confirmed the targeting of miR-199a-5p on the 3-UTR of the rat XIAP and its post-transcriptional regulation of XIAP protein level, but not at mRNA level. Analyses in a rat model of SCI revealed a trend towards increased expression of miR-199a-5p and a decrease in XIAP protein level at 3 days after injury. Finally, using a specific fluorescent in situ hybridization (FISH) probe for miR-199a-5p, we characterized the expression pattern of miR-199a-5p in cells of uninjured and rat-contused spinal cords. These findings provide new insights into apoptotic miRNA-mediated mechanisms after SCI, which will help us develop therapeutic strategies based on miRNAs for treating SCI.

Measuring pulmonary nodules accurately can help with early diagnosis of lung cancer, which can improve a patient’s chances of survival. Many methods for segmenting nodules have been developed, but they all rely on input from radiologists in the form of a 3D volume of interest (VOI) or use a constant region of interest (ROI) and only consider the presence of nodule within the given VOI. These approaches limit the networks’ ability to detect nodules outside the given VOI and can also include unnecessary structures in the VOI, leading to potentially inaccurate segmentation. In this work, we propose a novel approach for 3D lung nodule segmentation by using 2D region of interest (ROI) inputted from radiologist or computer-aided detection (CADe) system. Particularly, we design a dual-encoder-based hard attention network (DEHA-Net) which incorporates the full slice of thoracic computed tomography scan along with the ROI mask to produce an accurate segmentation mask of lung nodule in the given slice. The proposed architecture exploits the adaptive region of interest (A-ROI) algorithm to automatically investigates the penetration of lung nodule into surrounding slices while eliminating the need to drawing separate ROIs in each slice. Further, the framework performs the multi-view analysis, i.e., in sagittal and coronal views, to improve the segmentation performance. The proposed scheme has been rigorously evaluated on the lung image database consortium and image database resource initiative (LIDC/IDRI) dataset and an extensive analysis of results have been performed. The quantitative analysis shows that the proposed method not only improves the existing state-of-the-art in term of dice score but also, significantly robust against the different types, shape and dimensions of lung nodules.

COVID-19 is a well-known respiratory disease spreading worldwide since January 2020, causing many deaths and massive pressure on health systems. This pandemic’s appearance compromised the health services’ sustainability and quality as many procedures were postponed or even canceled out, with an expected increase of adverse events like nosocomial infections, in-hospital deaths, and the worsening of the patients’ clinical status. Therefore, assessing whether the healthcare providers’ performance has changed is paramount. In this case, we evaluated the public hospitals in Portugal as the leading secondary health care providers in the country, which in turn has been highly affected by the pandemic. To this end, we developed a network Data Envelopment Analysis model serially relating efficiency and effectiveness. Using 2,795 observations from public hospitals and 18 variables, we observed consistent drops in efficiency when the pandemic started, followed by a recovery to levels above the pre-pandemic ones. Regarding effectiveness, we observed a positive trend during the evaluated period. In short, these results allow us to conclude that, apart from the great resilience of public healthcare providers, the Portuguese State was not prepared for a pandemic like COVID-19, but still the actions taken (including massive vaccination) were beneficial.

Background: It is necessary to apply a behavior-based safety (BBS) program to prevent at-risk behavior. An effective BBS program requires the implementation of not only behavioral definitions and a customized critical behavior checklist (CBC) but also observations of behavior, coupled with customized interventions at power plants. Method: In this study, a customized CBC and behavioral definition were developed through a review of five different sites that previously used a CBC. The rules of observation, flow, and target were established to initiate the observations. Customized interventions were selected to increase safe behaviors. CBC scoring was used to evaluate observed safe behaviors for three years. Recognized safe behaviors were evaluated with a questionnaire that included four items each for conformity and participation behaviors and were then analyzed through a factor analysis and a t-test. The questionnaires were conducted three months before and after the implementation of the BBS program. Results: The customized CBC, behavioral definition, and interventions were effective, such that observed safe behaviors and the levels of workers’ recognized safe behaviors increased. Conclusion: The application of the BBS program was found to increase the observed and recognized safe behaviors. Therefore, the program applied to this site can help increase safe behaviors at other identical or similar sites, as well as prevent an accident, which also corresponds with the results of prior studies.

We report an agent-based model to compare the effectiveness of simple and complex mobile dating application interfaces in generating matches for virtual users. We define the relative complexity of dating applications as the number of available features and dub this variable, the multiplicity. We replicate some of the most popular mobile dating applications through the generation of a synthetic population endowed with attributes, preferences, and behaviors drawn from literature. We treat our data as a network dataset and use a robust statistical procedure (MRQAP) to issue a valid and reliable comparison between simulated applications. We show how the quadratic assignment procedure can be used to compare network simulations rigorously. As a result, we observe a direct relationship between multiplicity and agent-level experiences and expectations in match generation. We also observe the emergence of divergent matching systems with minor rule changes as well as several expected properties of online dating systems. This work serves as a proof-of-concept in the integration of classical social network analysis methods with agent-based modeling to compare virtual designs and to enhance the policy-generation process of online social networks.

An adaptor signature can be viewed as a signature concealed with a secret value and, by design, any two of the trio yield the other. In a multiparty setting, an initial adaptor signature allows each party create additional adaptor signatures without the original secret. Adaptor signatures help address scalability and interoperabity issues in blockchain. They can also bring some important advantages to cryptocurrencies, such as low on-chain cost, improved transaction fungibility, and less limitations of a blockchain’s scripting language. In this paper, we propose a new two-party adaptor signature scheme that relies on quantum-safe hard problems in coding theory. The proposed scheme uses a hash-and-sign code-based signature scheme introduced by Debris-Alazard et al. and a code-based hard relation defined from the well-known syndrome decoding problem. To achieve all the basic properties of adaptor signatures formalized by Aumayr et al., we introduce further modifications to the aforementioned signature scheme. We also give a security analysis of our scheme and its application to the atomic swap. After providing a set of parameters for our scheme, we show that it has the smallest pre-signature size compared to existing post-quantum adaptor signatures.

The aim of this study was to determine the extent to which the Tyme Wear smart shirt is as reliable and valid in detecting personalized ventilatory thresholds when compared to the Parvo Medics TrueOne 2400. In this validation study, 19 subjects were recruited to conduct two graded exercise test (GXT) trials. Each GXT trial was separated by seven to ten days of rest. During the GXT, gas exchange and heart rate data were collected by the TrueOne 2400 (TRUE) in addition to the ventilation data collected by the Tyme Wear smart shirt (S-PRED). Gas exchange data from TRUE was used to detect VT1 and VT2. TRUE and S-PRED VT1 and VT2 were compared to determine the reliability and validity of the smart shirt. Of the 19 subjects, data from 15 subjects were used during analysis. S-PRED exhibited excellent (ICC &gt; 0.90) reliability for detection of VT1 and VT2 utilizing time point and workload and moderate (0.90 &gt; ICC &gt; 0.75 ) reliability utilizing heart rate. TRUE exhibited excellent reliability for detection of VT1 and VT2 utilizing time point, workload, and heart rate. When compared to TRUE, S-PRED appears to underestimate the VT1 workload (p &gt; 0.05) across both trials and heart rate (p &lt; 0.05) for trial 1. However, S-PRED appears to underestimate VT2 workload (p &lt; 0.05) and heart rate (p &lt; 0.05) across both trials. The result from this study suggests that the Tyme Wear smart shirt is less valid but is comparable in reliability when compared to the gold standard. Moreover, despite the underestimation of S-PRED VT1 and VT2, the S-PRED detected personalized ventilatory thresholds will provide an adequate training workload for most individuals. In conclusion, the Tyme Wear smart shirt provides easily accessible testing to establish threshold-guided training zones but does not devalue the long-standing laboratory equivalent.

Tephra plumes can cause a significant hazard for surrounding towns, infrastructure, and air traffic. The current work presents the use of a small and compact X-band Multi-Parameter (X-MP) radar for the remote tephra detection and tracking of two eruptive events at Merapi Volcano, Indonesia, in May and June 2018. Tephra detection was done by analysing the multiple parameters of radar: copolar correlation and reflectivity intensity. These parameters were used to cancel unwanted clutter and retrieve tephra properties, which are grain size and concentration. Real-time spatial and temporal forecasting of tephra dispersal was performed by applying an advection scheme (nowcasting) in the manner of Ensemble Prediction System (EPS). Cross-validation was done using field-survey data, radar observations, and Himawari-8 imagery. The nowcasting model computed both the displacement and growth and decaying rate of the plume based on the temporal changes in two-dimensional movement and tephra concentration, respectively. Our results with ground-based data, where the radar-based estimated grain size distribution fell within the range of in-situ data. The uncertainty of real-time forecasted tephra plume depends on the initial condition, which affects the growth-and decaying rate estimation. The EPS improves the predictability rate by reducing the number of missed and false forecasted events. Our findings and the method presented here are suitable for early warning of tephra fall hazard at the local scale.

The unavoidable progression of EGFR-mutated NSCLC on EGFR-TKIs forces us to discover solutions for further therapies. Herein, we discuss the necessity of accurate genomic mapping of progressive disease illustrated by a patient case. Tumor rebiopsies at progression are strongly needed to characterize acquired resistance to EGFR-TKI. The necessary data, however, may be reliably obtained only by deep targeted next generation sequencing (NGS) of both DNA and RNA. The reported case is a patient with EGFR-mutant NSCLC, who progressed during second line Osimertinib with subsequent targeted treatment determined by the detection of an acquired intergenic ANK3-RET-fusion with concomitant PTEN-mutation and MDM2-amplification. These three acquired gene alterations represent potential mechanisms of TKI-resistance, not previously reported on second line Osimertinib. Yet, while PTEN-mutations and MDM2-amplification are currently undruggable, the ANK3-RET fusion allowed further personalized treatment by combining continuation of Osimertinib with the RET-TKI Pralsetinib, which resulted in objective partial response, so far for 7 months, and significant clinical improvement. Hence, complementary DNA- and RNA-based targeted NGS may be of importance in clinical routine to better reveal the current molecular state of the disease and contribute to the identification of further targeted therapy strategies. Indeed, further cases with acquired RET-fusions, including ANK3-RET, should be investigated to fully determine the effectiveness of RET-TKI-Osimertinib combinations.

This document presents the design and manufacture of a reflectarray (RA) antenna for the Ku-band, based on a fully-metallic 3D architecture. The reflectarray unit cell is formed by a square-shaped waveguide section ended in a short circuit, that is the reflectarray back ground plane. Each cell has the ability of configuring the phase of its own reflected field by means of resonators perforated on the walls of the cell waveguide section. The resonator-based waveguide cell introduces the 3D character to the design. The geometry of the resonators and its size variation introduces the phase behaviour of each cell, conforming the radiation pattern of the reflectarray. This design explores the potential of phase value truncation (6 states and 2 states), and demonstrates that proper pattern results can be obtained with this phase truncation.

Traditional refractory materials such as nickel-based superalloys have been gradually unable to meet the performance requirements of advanced materials. The Mo-Si-based alloy, as a new type of high temperature structural material, has entered the vision of researchers due to its charming high temperature performance characteristics. However, its easy oxidation and even "pesting oxidation" at medium temperatures limit its further applications. In order to solve this problem, researchers have conducted large numbers of experiments and made breakthrough achievements. Based on these research results, the effects of rare earth elements like La, Hf, Ce and Y on the microstructure and oxidation behavior of Mo-Si-based alloys were systematically reviewed in the current work. Meanwhile, this paper also provided an analysis about the strengthening mechanism of rare earth elements on the oxidation behavior for Mo-Si-based alloys after discussing the oxidation process. Furthermore, the research focus about the oxidation protection of Mo-Si-based alloys in the future was prospected to expand the application field.

The task of unsupervised anomalous sound detection (ASD) is challenging for detecting anomalous sounds from a large audio database without any annotated anomalous training data. Many unsupervised methods were proposed, but previous works have confirmed that the classification-based models far exceeds the unsupervised models in ASD. In this paper, we adopt two classification-based anomaly detection models: (1) Outlier classifier is to distinguish anomalous sounds or outliers from the normal; (2) ID classifier identifies anomalies using both the confidence of classification and the similarity of hidden embeddings. We conduct experiments in task 2 of DCASE 2020 challenge, and our ensemble method achieves an averaged area under the curve (AUC) of 95.82% and averaged partial AUC (pAUC) of 92.32%, which outperforms the state-of-the-art models.

Nickel-based superalloys are attractive to many industrial sectors (automotive, military, energy, aerospace etc.). However, their physical properties make them difficult to machining using traditional tools. Therefore, the new materials for the machining of Ni-based alloys are required. Ceramic-based composites could act as a tool to replace the current materials. The incentives for this paper are to provide an overview of existing ceramic composites and draw some conclusions that will help in solving the problem of choosing materials for processing of Ni-based superalloys. Despite the diversity of ceramic composites in this work the focus was on the SiAlON ceramic.

Background: Research continues to search for blood-based biomarkers sensitive to Alzheimer’s disease (AD) pathology during the initial stages when symptoms of cognitive decline are not yet apparent. A blood-based biomarker candidate is metalloprotein p53, the conformation of which was previously found to be altered in peripheral cells from individuals with mild cognitive impairment (MCI) and AD, presenting as an unfolded p53 (U-p53) conformational variant. Methods: Plasma samples from the well-characterized Australian Imaging, Biomarkers, and Lifestyle (AIBL) cohort were used to identify the clinically relevant AZ 284^® peptide, specifically present in samples from individuals with symptomatic AD. The AZ 284^® peptide, which is a marker of the U-p53 conformational variant (U-p53^AZ), was identified by immunoprecipitation (IP) with a novel U-p53 conformational variant-specific antibody followed by liquid chromatography (LC) tandem mass spectrometry (MS/MS) and protein sequencing. Using IP-LC surface-activated chemical ionization (SACI) MS/MS analysis, the prognostic and diagnostic performance of U-p53^AZ were examined in the longitudinal AIBL cohort, including 252 plasma samples derived from 214 elderly individuals. For the prognostic analyses, U-p53^AZ levels were assessed at 36, 72, and 90 months after baseline assessment. Results: The prognostic performance of U-p53^AZ to predict the progression to AD from preclinical or prodromal AD was high, with area under the receiver operating characteristic curve (AUC) values close to or above 0.90. Furthermore, U-p53^AZ predicted the progression to AD more than 6 years prior to symptom onset with positive and negative predictive values of about 90%. Additionally, the estimated prognostic performance of U-p53^AZ was superior to other main risk factors (i.e., age, sex, and either alone or in combination with amyloid status. Furthermore, U-p53^AZ had high diagnostic performance to differentiate cognitively normal individuals from those with AD (AUC values >0.88). Conclusion: These findings support the use of U-p53^AZ as a prognostic blood-based biomarker accurately predicting the progression to AD dementia during the preclinical and prodromal stages at least 6 years before receiving the clinical diagnosis of AD dementia.

Predictive maintenance (PM) algorithms are widely applied for detecting operational anomalies on industrial processes to trigger maintenance before a possible breakdown; however, much less focus has been devoted to the use of such PM predictions as feedback in automated process control mechanisms. They usually integrate preventive solutions to protect the machines, usually causing downtimes. The premise of this study is to develop a holistic adaptive process scheduling mechanism that incorporates PM analysis as a safety component to optimize the operation mode of an industrial process toward preventing breakdowns while maintaining its availability and operational state, thereby reducing downtimes. As PM is largely a data-driven approach; hence, relies on the setup, we first compare different PM approaches and identify a one-class support vector machine (OCSVM) as the best performing option for the anomaly detection on our setup. Then, we propose a novel pipeline to integrate maintenance predictions into a real-time adaptive process scheduling mechanism. It schedules for the most suitable operation, i.e., optimizing for machine health and process efficiency, according to the abnormal readings. To demonstrate the pipeline on action, we implement our approach on a small-scale conveyor belt system utilizing our Internet of Things (IoT) framework. The results show that our PM-based adaptive process control provides an efficient process with less or no downtime. We also conclude that a PM approach does not provide sufficient efficiency without its integration into an autonomous planning process.

Cryptography has been used from time immemorial for preserving the confidentiality of data/information in storage or in transit. Thus, cryptography research has also been evolving from the classical Caesar cipher to the modern cryptosystems based on modular arithmetic to the contemporary cryptosystems based on quantum computing. The emergence of quantum computing imposes a major threat on the modern cryptosystems based on modular arithmetic whereby, even the computationally hard problems which constitute for the strength of the modular arithmetic ciphers could be solved in deterministic time. This threat triggered post-quantum cryptography research in order to design and develop post-quantum algorithms that can withstand quantum computing attacks. This paper provides a review of the various post-quantum cryptography and, in specific, code-based cryptography research dimensions. The research directions that are yet to be explored in code-based cryptography research is another key contribution of this paper.

This study examined the effect of an educational hybrid physical education (PE) intervention on cognitive performance and academic achievement in adolescents. A 9-month group-randomized controlled trial was conducted in 150 participants (age: 14.63 ± 1.38) allocated into control group (CG, n = 37) and experimental group (EG, n = 113). Inhibition, verbal fluency, planning and academic achievement were assessed. Significant differences were observed in the post-test for cognitive inhibition, verbal fluency in animals, and the average from verbal fluency in favour of the EG. With regard to the intervention, verbal fluency in animals, verbal fluency in vegetables, the average of verbal fluency, cognitive inhibition, language, the average of all subjects, the average of all subjects except PE, and the average from the core subjects) increased significantly in the EG. The last five variables (the academic ones and cognitive inhibition) also increased in the CG, in addition to mathematics. This study contributes to the knowledge by suggesting that both methodologies produced improvements in the measured variables, but the use of a hybrid program based on TPSR and gamification strategies produce improvements in cognitive performance, specifically through the cognitive inhibition and verbal fluency.

The use of vitamin D (VitD) supplements has become widespread in the last decade due not only to the dissociation between the blood levels recommended as "optimal" and those shown by the healthy population, but also to its presumed beneficial effects on multiple disorders. This work evaluated the levels of 25-hydroxyvitamin D [25(OH)D] in a healthy population of European origin living in a region with high solar irradiation. In serum samples from a population-based study conducted in the Canary Islands, levels of 25(OH)D were analyzed. In 876 individuals who had no history of kidney or malabsorption disorders and who had not been treated with calcium and/or VitD supplementation, the median 25(OH)D level was 26.3 (5th;95th percentile, 14.3;45.8)ng/mL. Notably, 65.4% of the population had 25(OH)D blood levels below 30ng/mL, 23.4% below 20ng/mL and 6.4% below 15ng/mL. Based on the lack of evidence supporting causality between 25(OH)D levels below what is recommended as optimal (≥20ng/mL, or even ≥30ng/mL) and major skeletal and non-skeletal diseases, and in light of the distribution of the concentration of this vitamin in healthy adults living under optimal conditions of solar irradiation, it seems reasonable to consider 25(OH)D levels below 20ng/mL and close to 15ng/mL as adequate for the general population.

Purpose: Now traditional lecture-based teaching and learning have been affected by the COVID-19. The objectives of this article are to design the novel educational technique called ‘dynamic-based learning’ (DBL) that provides the combination of online teaching-learning methods and student’s creativity, to evaluate primary dynamic-based learning function, and to propose dynamic-based learning for higher education. Methods: DBL composes of four steps, including, preparation, homework, classroom, and evaluation, which was designed, and taught in medical and dental schools. Online support materials included mobile phone, email, Facebook Messenger, Line Messenger, Cisco Webex, and Zoom Meetings applications were recruited for this novel method. Results: A total of 32 third-year medical students and 26 sixth-year dental students was treated by DBL similarly. three subjects, including, Innovation in Dentistry, Basic Medical Research, and Principles of Pathology and Forensic Medicine were selected in this article. The results showed students could create their knowledge, ideas, and creativity during the online classes.Conclusion: DBL can be used as an alternative learning mode during the COVID-19 crisis. The benefits of DBL also include high flexibility, dynamic process, active learning, and high creativity. DBL should be tested with other disciplines such as engineering school, laws school, health sciences school, and should be compared with other traditional teaching and learning modes in the future. This method may support the global higher education systems to move forward the COVID-19 pandemic to set a novel standard of a future normal.

Significant efforts in the past decades to teach evidence-based practice (EBP) implementation has emphasized increasing knowledge of EBP and developing interventions to support adoption to practice. These efforts have resulted in only limited sustained improvements in the daily use of evidence-based interventions in clinical practice in most health professions. Many new interven-tions with limited evidence of effectiveness are readily adopted each year - indicating openness to change is not the problem. The selection of an intervention is the outcome of an elaborate and complex cognitive process which is shaped by how they represent the problem in their mind and is mostly invisible processes to others. Therefore, the complex thinking process which support appropriate adoption of interventions should be taught more explicitly. Making the process visible to clinicians increases the acquisition of the skills required to judiciously select one in-tervention over others. The purpose of this paper is to provide a review of the selection process and the critical analysis that is required to appropriately decide to trial or not trial new intervention strategies with patients.

Therapeutic options for the highly pathogenic human Severe Acute Respiratory Syndrome-Coronavirus 2 (SARS-CoV-2) causing the current pandemic Coronavirus disease (COVID-19) are urgently needed. COVID-19 is associated with viral pneumonia and acute respiratory distress syndrome causing significant morbidity and mortality. The proposed treatments for COVID-19, such as hydroxychloroquine, remdesivir and lopinavir/ritonavir, have shown little or no effect in the clinic. Additionally, bacterial and fungal pathogens contribute to the SARS-CoV-2 mediated pneumonia disease complex. The antibiotic resistance in pneumonia treatment is increasing at an alarming rate. Therefore, carbon-based nanomaterials (CBNs), such as fullerene, carbon dots, graphene, and their derivatives constitute a promising alternative due to their wide-spectrum antimicrobial activity, biocompatibility, biodegradability and capacity to induce tissue regeneration. Furthermore, the antimicrobial mode of action is mainly physical (e.g. membrane distortion), which is characterized by a low risk of antimicrobial resistance. In this review, we evaluated the literature on the antiviral activity and broad-spectrum antimicrobial properties of CBNs. CBNs had antiviral activity against 12 enveloped positive-sense single-stranded RNA viruses similar to SARS-CoV-2. CBNs with low or no toxicity to the humans are promising therapeutics against COVID-19 pneumonia complex with other viruses, bacteria and fungi, including those that are multidrug-resistant.

Background: This year has seen the emergence of two major crises, a significant increase in frequency and severity of hurricanes and the COVID-19 pandemic. However, little is known as to how each of these two events have impacted the other. A rapid qualitative assessment was conducted to determine the impact of the pandemic on preparedness and response to natural disasters and the impact of past experiences with natural disasters in responding to the pandemic. Methods: Semi-structured interviews were conducted with 26 representatives of 24 different community-based programs in southern Louisiana. Data were analyzed using procedures embedded in the Rapid Assessment Procedure – Informed Community Ethnography methodology, using techniques of immersion and crystallization and focused thematic analysis. Results: The pandemic has impacted the form and function of disaster preparedness, making it harder to plan for evacuations in event of a hurricane. Specific concerns included being able to see people in-person, providing food and other resources to residents who shelter in place, finding volunteers to assist in food distribution and other forms of disaster response, competing for funds to support disaster-related activities, developing new support infrastructures, and focusing on equity in disaster preparedness. However, several strengths based on disaster preparedness experience and capabilities were identified, including providing a framework for how to respond and adapt to COVID and integration of COVID response with their normal disaster preparedness activities. Conclusions: Although prior experience has enabled community-based organizations to respond to the pandemic, the pandemic is also creating new challenges to preparing for and responding to natural disasters.

Considering the significant advancements in autonomous vehicle technology, research in this field is of interest to researchers. To automatic parking, controlling steer angle, gas hatch, and brakes need to be learned. Due to the increase in the number of cars and road traffic, car parking space has decreased. Its main reason is information error. Because the driver does not receive the necessary information or receives it too late, he cannot take appropriate action against it. This paper uses two phases: the first phase, for goal coordination, was used genetic algorithms and the Cuckoo search algorithm was used to increase driver information from the surroundings. Using the Cuckoo search algorithm and considering the limitations, it increases the driver’s level of information from the environment. Also, by exchanging information through the application, it enables the information to reach the driver much more quickly and the driver reacts appropriately at the right time. The suggested protocol is called the MODM-based solution. Here, the technique is assessed through extensive simulations performed in the NS-3 environment. Based on the simulation outcomes, it is indicated that the parking system performance metrics are enhanced based on the detection rate, false-negative rate, and false-positive rate.

Cluster-based routing in Mobile Ad-Hoc Networks is considered one of the convenient methods of routing. The existence of Cluster Head (CH) in a group of nodes for data forwarding improves the performance of routing in terms of routing overhead and power consumption. In this paper, a clustering algorithm using hierarchical routing for mobile ad hoc networks is proposed. In the proposed method, first, clusters are formed by the FLOC clustering method with low overlapping. Then, according to the most important network criteria, including hop count, noise ratio, distance, remaining energy, and link expiration time, head clusters are selected based on the weighting algorithm. To transfer data in the proposed method, two types of communication are used, e.g., inter-cluster communication and intra-cluster communication in which the shortest path to the target cluster is selected. The proposed P-METHOD technique is based on hierarchy and clustering as well as using a weighted algorithm that reduces delay in data transmission on the network. Moreover, P-METHOD is evaluated here via extensive simulations carried out in NS-2. The simulation results indicate that the MANET network performance metrics are improved in terms of average throughput, Packet Delivery Ratio (PDR), delay, residual energy, and lifetime.

The aim of this paper is to contribute to the body of knowledge about Project-Based Learning (PBL) methodology in higher education by describing and analysing interrelations between competencies, and their contribution to knowledge transfer (KT) and students’ rating of the project. The sample consisted of 464 students from the Universities of Huelva (N=347; 74.8%) and Murcia (N= 117; 25.2%), enrolled in the second year of a degree in either Infant or Primary Education. Data was collected through a self-administered questionnaire comprising a total of 53 items measuring General, Specific and Transversal competencies, as well as students’ rating of the project. Competencies were selected from the course programmes for the degrees in Infant and Primary Education. Preliminary results showed that competencies were moderately to highly acquired after PBL, and that students reported notable KT as well as a positive assessment of the project. KT showed a high degree of association with students’ ratings and was established as a key factor in learning and learner satisfaction in higher education.

Nickel based superalloys finds extensive usage in manufacturing of intricate part shapes in gas turbine, aircraft, submarine, and chemical industries owing their excellent mechanical property and heat resistant abilities. However, machining of such difficult-to-machine alloys up to the desired accuracy and preciseness is a complex task owing to a rapid tool wear and failure. In view of this, present work proposes an experimental investigation and optimization of process parameters of the cryogenic assisted turning process during machining of Nimonic C-263 super alloy with a multilayer CVD insert. Taguchi’s L-27 orthogonal array is used plan the experiments. Effect of input parameters viz. cutting speed (N), cutting feed (f), depth of cut (d) are studied on responses viz. surface roughness (SR), nose wear (NW) and cutting forces (F) under hybrid cryogenic (direct+indirect) machining environment. A scanning electron microscope (SEM) analysis is carried out to explore the post-machining outcomes on the performance measures. The multiple responses are converted in to single response and ranked according to Taguchi based gray relational grade (TGRG). Feed rate (f) is found to be the most influential parameter from the analysis of variance of GRG. The means of GRG for each level of process parameters are used to improve the optimal process parameters further. Finally, the confirmative experiment is performed with these optimal set of process parameters which showed an improvement of 9.34% in the value of GRG. The proposed work can be beneficial to choose ideal process conditions to enhance the performance of turning operation.

Drug design is used for different applications of bioinformatics tools analyze DNA, genome, and sequence target region of a small organic molecule in order to understand the molecules of disease. Bioinformatics tools are identified a newly wide research field and minimize future risks through web servers and data mining. Clinical sample test performed with the bioinformatics tools as the biomedical detective. A particular structure and configuration of protein obliging in Drug design concluded Bioinformatics. This review bioinformatics tools and webserver will discuss functions of small organic molecules according to clinical pharmacology.

While the knowledge about the development of understanding positive integers is rapidly growing, the development of understanding zero is not well-known. Here we tested several components of preschoolers’ understanding zero: whether they can use empty sets in numerical tasks, whether they can use empty sets soon after they understand the cardinality principle, whether they know what the word “zero” refers to, and whether they categorize zero as a number. The results show that preschoolers can handle empty sets in numerical tasks as soon as they understand the cardinality principle or even earlier, and some of them know that these sets are labeled as “zero.” However, they are unsure whether zero is a number. These results identify three components of knowledge about zero: operational knowledge, linguistic knowledge, and meta knowledge. To account for these results we propose that preschoolers might understand numbers as the properties of items or objects in a set. In this view, zero cannot be a number, because an empty set does not include any items, and the missing items cannot have any property, excluding also the number property. This model might explain why zero is handled correctly in numerical tasks, while it is not regarded to be a number.

In this study, the thermal behavior of a PCM-based heat sink in the presence of horizontal fins was numerically investigated. These types of heat sink can be effective in electronic cooling applications. Independent variables included aspect ratio (AR), number of horizontal fins (n) and their length (LR), while the objective function was defined to maximize the safe operation time (tmax). The incorporation of horizontal fins has a positive effect (thermal conductivity enhancement) as well as a negative effect (latent heat reduction). Based on the results, the optimal number of horizontal fins was five. As the number of fins rises up to five, the incremental effect of thermal conductivity improvement (positive effect) was superior to the decremental effect of the latent heat reduction (negative effect), hence the objective function (tmax) improved. However, with a further increase in the number of fins upon five, the negative effect prevailed over the positive effect and therefore the safe operation time diminished.

Since the outbreak of the novel coronavirus disease (COVID-19) at the end of 2019, the clinical presentation of the disease showed a great heterogeneity with a diverse impact between different subpopulations. Emerging evidence from different parts of the world showed significantly poor outcome among males compared to female patients. A better understanding of the molecular mechanisms behind this difference might be a fundamental step for a more effective and targeted response to the outbreak. For that reason, here we try to investigate the molecular basis of the gender variations in mortality rates related to COVID-19 infection. To achieve this, we used our in-house pipeline to process publicly available lung transcriptomic data from 141 females compared to 286 males. After excluding Y specific genes, our results showed a shortlist of 73 genes that are differentially expressed between the two groups. Our results showed downregulation of a group of genes that are involved in the regulation of hydrolase activity including (AGTR1, CHM, DDX3X, FGFR3, SFRP2, and NLRP2), which is also believed to be essential for lung immune response and antimicrobial activity in the lung tissues in males compared to females. In contrast, our results showed an upregulation of angiotensin II receptor type 1 (AGTR1), a member of the renin-angiotensin system (RAS) that plays a role in angiotensin-converting enzyme 2 (ACE2) activity modulation. Interestingly, recent reports and experimental animal models highlight an important role of this receptor in SARS-Coronavirus lung damage as well as pulmonary edema, suggesting a possible role of its blockers like losartan and olmesartan as potential therapeutic options for COVID-19 infection. Finally, our results also showed a differential expression of different genes that are involved in the immune response including the NLRP2 and PTGDR2, further supporting the notion of the sex-based immunological differences. Taken together, our results provide an initial evidence of the molecular mechanisms that might be involved in the differential outcomes observed between both genders during the COVID-19 outbreak. This might be essential for the discovery of new targets and more precise therapeutic options to treat COVID-19 patients from different clinical and epidemiological characteristics with the aim of improving their outcome.

Background: Three drug-combinations, ipilimumab-nivolumab (Ipi-Nivo), pembrolizumab-axitinib (Pembro-Axi) and avelumab-axitinib (Ave-Axi), have received regulatory approvals in USA and Europe for the treatment of metastatic renal cell carcinoma with clear cell component (mRCC). However, no head-to-head comparison data are available to identify the best option. Therefore, we aimed to compare these new treatments in the first-line setting. Methods: We conducted a systematic search in Pubmed, the Cochrane library and clinicaltri-al.gov website from January 2015 to October 2019, for any randomized controlled trials of treatment-naïve patients with mRCC. The process was performed according to PRISMA guide-lines. We performed a Bayesian network meta-analysis with two different approaches. The out-comes for analysis were overall survival, progression-free survival, and objective response rate. Results: Our search identified 3 published phase 3 randomized clinical trials (2835 patients). In the contrast-based model, Ave-Axi (SUCRA: 83%) and Pembro-Axi (SUCRA: 80%) exhibited the best ranking probabilities for PFS. For OS, Pembro-Axi (SUCRA: 96%) was the most pref-erable option against Ave-Axi and Ipi-Nivo. Objective response rate analysis showed Ave-Axi as the best (SUCRA= 94%) and Pembro-Axi as second best option. In the parametric models, risk of progression was comparable for Ave-Axi and Ipi-Nivo, whereas Pembro-Axi exhibited a lower risk during the first 6 months of treatment and a higher risk afterward. Furthermore, Pembro-Axi exhibited a net advantage in terms of OS over the two other regimens, while Ave-Axi was the least preferable option. Conclusions: Overall evidences suggested pembrolizumab plus axitinib may be the best option.

In this manuscript, an automated framework dedicated to design space exploration and design optimization studies is presented. The framework integrates a set of numerical simulation, computer-aided design, numerical optimization, and data analytics tools using scripting capabilities. The tools used are open-source and freeware, and can be deployed on any platform. The main feature of the proposed methodology is the use of a cloud-based parametrical computer-aided design application, which allows the user to change any parametric variable defined in the solid model. We demonstrate the capabilities and flexibility of the framework using computational fluid dynamics applications; however, the same workflow can be used with any numerical simulation tool (e.g., a structural solver or a spread-sheet) that is able to interact via a command line interface or using scripting languages. We conduct design space exploration and design optimization studies using quantitative and qualitative metrics, and to reduce the high computing times and computational resources intrinsic to these kinds of studies, concurrent simulations and surrogate-based optimization are used.

A systematic review of the potential of implementing augmented reality (AR) in inquiry-based learning was conducted. We considered the purposes, potential advantages, application characteristics and the effects of using AR in inquiry-based learning. The findings reveal that AR, in the context of inquiry-based learning, is mostly implemented successfully to achieve cognitive and, less often, motivational and emotional learning goals. The AR solutions have mainly been applied in the Conceptualization and less in the Investigation phase. The affordances of AR in the Orientation, Conclusion and Discussion phase need to be applied in further studies.

The Ni-Co-Cr-W-Mo system is critical for the design of nickel-based super-alloys. This system stabilizes different topologically close packed (TCP) phases in many of the commercially super-alloys with high W and Mo contents. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), and thermodynamic calculations are applied to investigate the thermodynamics of the precipitates in two different W content Ni-Co-Cr-W-Mo super-alloys. Computational thermodynamics verified experimental observation of the f u phase formation as a function of temperature and alloy chemistry, but the kinetics for the precipitation of M6C phase do not agree with the experimental findings. The major precipitates of alloy 1 at temperatures 700 and 750 °C during long time exposure are M23C6, γ′ phase, and MC, and alloy 2 are M23C6, γ′ phase, MC, M6C and u phase. The W addition is found to promote the precipitation of M6C and u phase during exposure. The M6C has higher W and lower Ni content than that of u phase, meanwhile, M6C is an unstable phase would transform into M12C after 5000 h exposure at 750 °C. A great quantity of needle-like u phases precipitated after exposure at 750 °C for 5000h, which have no effect on the impact property of alloy 2.

Ecosystems are not merely vulnerable to climate change but, if sustainably restored and protected, are a major source of human resilience. Not only is the evidence-base for the importance of these “Nature-based Solutions” (NbS) growing rapidly, but NbS are featuring with increasing prominence in global climate change policy. Here we report on the prominence of NbS in the 141 adaptation components of the 167 Nationally Determined Contributions (NDCs) that were submitted to UNFCCC by all signatories of the Paris Agreement. In total, 103 nations include NbS in the adaptation component of their NDC, 76 nations include them in both their adaptation and mitigation component, and an additional 27 include them as part of their mitigation plans only. In other words, 130 nations—or 66% of all signatories to the Paris Agreement—have articulated intentions of working with ecosystems, in one form or another, to address the causes and consequences of climate change. However, commitments rarely translate into robust science-based targets. As climate pledges are revised in 2020, we urge the ecosystem science community to work closely with policymakers to identify meaningful adaptation targets that benefit both people and the ecosystems on which they depend.

Grain production and storage are major components in food security. In the ancient times, food security was achieved through gathering of fruits, grains, herbs, tubers, and roots from the forests by individual households. Advancements in human civilization led to domestication of crops and a need to save food for not only a household, but the nation. This extended need for food security led to establishment of national reservoirs for major produces and this practice varies greatly in different states. Each of the applied food production, handling and storage approaches has got its benefits and challenges. In sub-Saharan Africa, several countries have a public funded budget to subsidize production costs, to buy grains from farmers and to store the produce for a specific period and/or until the next harvests. During the times of famine, the stored grains are later given free to the citizens. If there is no famine, the grain is sold to retailers and/or processors (e.g., millers) who later sell it to the consumers. This approach works well if the produce (mainly grain) is stored under conditions that do not favor growth of molds, as some of these could contaminate the grain with toxic and carcinogenic metabolites called mycotoxins. Conditions that alleviate contamination of grains are required during production, handling and storage. Most of the grain is produced by smallholder farmers under sub-optimal conditions, which make vulnerable to colonization and contamination by toxigenic fungi. Further, the grain is stored in silos at large masses, where it is hard to monitor the conditions at different points of these facilities, and hence it becomes vulnerable to additional contamination. Production and storage of grain under conditions that favor mycotoxins poses major food health and safety risks to humans and livestock who consume the grain. This concept paper focuses on how establishment of local grain production and banking system (LGPBS) could enhance food security and safety in East Africa. The concept of LGPBS provides an extension of advisory and finance support within warehouse receipting system to enhance grain production under optimal conditions. The major practices at the LGPBS, and how each could contribute to food security and safety are discussed. While the concept paper gives more strength on maize production and safety, similar practices could be applied to enhance safety of other grains in the same LGPBS.

Performance appraisal is a fundamental indicator in public accountability to achieve the good governance principles. Hence, this study aims to analyze the performance measurement that can improve performance on government agencies in South Sulawesi, Indonesia. The study was conducted in qualitative approach. The research found that non-integrated models of performance measurement in South Sulawesi are inefficient and ineffective. Inefficiency happens because it uses time and cost resources separately, while being ineffective is because both models focuses on each goal instead on performance goals and the process is not supported by the actual management.

Location-Based Services (LBS) have been widely deployed for the connected vehicle (CV) applications such as vehicle navigation,vehicle tracking and location-based augmented reality. The current LBS deployments have limitations in supporting time-critical CV use cases, including vehicle to vehicle (V2V), vehicle to infrastructure (V2I) and vehicle-to-people (V2P) safety applications. The paper presents the new LBS framework based on the publish-subscribe communication paradigm, to enable device-to-device (D2D) connections through use of selected application protocols in the application layer of the TCP/IP layered protocol model. Two publish-subscribe application protocols, Distributed Data Service (DDS) real-time publish and subscribe (DDS-RTPS) and Message Queue Telemetry Transport (MQTT), are introduced to support the LBS D2D applications. A number of test scenarios with Mosquitto MQTT and OpenDDS under 4G-mobile broadband (MBB) services are designed to assess the transmit/receive round-trip time (RTT) and packet-loss rate (PLR) with settings of a publisher to multiple subscribers, to simulate the connections to multiple vehicles. The transmission frequency is set for 10 Hz and the message sizes vary from 100 to 2000 Bytes. The PLRs are defined as the percentages of the delayed messages beyond a delay limit. Static test results with OpenDDS show that for the RTT delay beyond the limit of 100 ms, the total PLRs range between 5.25% and 8.76% for the message size of 50 to 2000 Bytes. Vehicle testing results with Mosquitto show that PLRs for the RTT delays between 200 ms and 1000 ms are 0.63%, 3.58% and 5.77%, for connections with 1, 4 and 10 vehicles, respectively. The results demonstrate the potential of the D2D LBS framework for medium-demanding CV safety applications such as V2P and V2I use cases, taking advantages of the 4G-MBB services and 5G extreme mobile broadband (eMBB) services and mobile devices generally available with all road users.