The integration of Artificial Intelligence (AI) in healthcare has transformed clinical practices by improving the accuracy of diagnosis, optimizing surgical procedures, improving the patient experience, and accelerating drug development. This article provides a comprehensive overview of the many applications of artificial intelligence (AI) across several industries, including fast diagnostics, where ML algorithms greatly enhance the accuracy and velocity of disease diagnosis. State-of-the-art robotic-assisted minimally invasive surgical procedures that shorten patients' hospitalization and improve their chances of recovery, cutting-edge AI applications in healthcare monitoring, and medication development. The article also looks at the primary challenges that AI in healthcare will inevitably encounter, such as differences in product quality, a shortage of skilled workers, privacy and ethical issues, and the need for improved regulatory frameworks. Despite the challenges, AI contributes significant advantages to the healthcare industry, providing novel and remarkable contributions to the efficiency of medical procedures and the progress of medical outcomes. The paper emphasizes the importance of cooperation in overcoming current challenges and enhancing the acceptability of AI technology in clinical settings. This will ensure that AI-driven innovations continue to enhance the standards of patient care.

The Internet of Medical Things (IoMT) represents a transformative technology that connects medical devices, sensors, and healthcare systems to enable real-time monitor-ing, data sharing, and advanced decision-making in healthcare. While the technical and clinical potential of IoMT has been explored extensively, research on the funding patterns and their implications remains sparse. This paper analyzes funding in IoMT research using bibliometric methods to assess the spatial dimensions of funded and non-funded research across different countries and regions. By employing Synthetic Knowledge Synthesis (SKS), the study triangulates quantitative and qualitative ap-proaches to provide insight into research trends, thematic differences, and the rela-tionship between funding and healthcare outcomes such as the Global Health Index (GHI). The results reveal that funded research exhibits higher publication rates in high-impact journals and is more concentrated in countries with stronger healthcare systems and higher R&D expenditures. However, countries with lower healthcare in-vestments are also increasingly contributing to IoMT research, likely in pursuit of im-proving healthcare outcomes. Thematic analysis shows that funded projects empha-size artificial intelligence applications in e-health and telemedicine, while non-funded research tends to focus on IoMT's role in pandemic management. These findings pro-vide insights into the global landscape of IoMT research funding and its impact on public health advancements.

The Internet of Things (IoT) technology and devices constitute an exciting field in computer science that is rapidly emerging worldwide. IoT devices function by connecting real-world objects to the internet, resulting in a higher number of interconnected devices than ever witnessed in history. Through internet connectivity, these devices can be utilized in various ways, such as monitoring and tracking. Their prevalence is increasing exponentially, coinciding with advancements in wireless networking technologies. The internet’s enhanced connectivity has played a vital role in fostering the proliferation of IoT devices. Presently, almost any everyday object can be network-connected. The demand for automation and efficiency has also been a contributing factor to the advancements in this technology. This paper aims to review the emergence of IoT devices, analyze their common applications, and explore the future prospects in this promising field of computer science. The examined applications encompass healthcare, agriculture, and smart cities. Although IoT technology exhibits similar deployment trends, this paper will explore different fields to discern the subtle nuances that exist among them. IoT technology can be applied to nearly any domain, and each use case has unique requirements. To comprehend the future of IoT, it is essential to comprehend the driving forces behind its advancements in various industries. By gaining a better understanding of the emergence of IoT devices, readers will develop insights into the factors that have propelled their growth and the conditions that led to technological advancements. Moreover, a comprehensive understanding of the prevalent methodologies will enable readers to distinguish between current practices and future methods. Given the rapid rate at which IoT technology is advancing, this paper aims to provide researchers with an understanding of the factors that have brought us to this point and the ongoing efforts to shape the future of IoT.

The utilization of sustainable biomaterials in pharmaceutical and medical applications has garnered significant attention in recent years due to their potential to address environmental concerns while meeting the demands of modern healthcare. This review provides a comprehensive overview of the latest advancements and applications of sustainable biomaterials in the pharmaceutical and medical fields. Beginning with an exploration of sustainable sourcing methods and production techniques, the review highlights the importance of eco-friendly practices in biomaterial development. Subsequently, it delves into the diverse range of sustainable biomaterials, including biopolymers, natural extracts, and bio-based nanoparticles, elucidating their properties and biomedical applications. Moreover, the chapter discusses the role of sustainable biomaterials in drug delivery systems, tissue engineering, wound healing, and medical device fabrication, emphasizing their biocompatibility, biodegradability, and therapeutic efficacy. Along with discussions on regulatory issues and commercialization prospects, the potential and challenges related to the integration of sustainable biomaterials into pharmaceutical and medical practices are also critically reviewed. By elucidating the advancements and potential of sustainable biomaterials, this article aims to inspire further research and innovation in the pursuit of environmentally friendly and effective solutions for healthcare applications.

The development of intelligent medical service robots for patient care presents significant chal-lenges, particularly in integrating diverse knowledge sources and enabling robots to autono-mously perform tasks in dynamic and unpredictable healthcare environments. This study in-troduces a novel framework that combines large language models (LLMs) with healthcare-specific knowledge and robotic operations to enhance autonomous task execution for a Robotic Health Attendant (RHA). Utilizing OpenAI’s ChatGPT, the RHA processes structured information about patient care protocols and unstructured human inputs to generate context-aware robot actions. A prototype system was tested in a simulated patient room where the RHA successfully performed both simple individual actions and complex tasks involving the execution of multiple actions, based on real-time dialogues with the LLM and predefined task specifications. The results demonstrate the potential of LLMs to reduce the reliance on hardcoded logic and provide healthcare professionals with the ability to interact with robotic systems through natural lan-guage.

Medical waste management is crucial issues for keeping our life safe and safety. Without effective measures for waste management, we cannot keep ourselves safe from different types of contagious diseases; viruses, bacteria. Knowledge sharing assists healthcare staff in identifying and mitigating hazards on appropriate handling, segregation and disposal medical waste. The aim of the study is to identify a multifaceted analysis of knowledge sharing, training, communication and attitudes for effective medical waste management. This study selected 153 medical workers randomly, including nurses, lab technologists, and cleaners, from hospitals, diagnostic centers, and clinics in the northern part of Bangladesh. The study design of this research is mixed-methods. This research adopts a survey and interview as a research strategy. The samples are collected randomly. SPSS software packages, MS Excel Office, and PLS-SEM are used to analyze data. Most of the respondents always share their knowledge face-to-face according to the findings. The result also shows that there are positive relationship between sources of knowledge (p: 0.046), awareness and knowledge (p: 0.049), attitudes of waste management (p: 0.025) and effective medical waste management. However, there are no relationships between communication and collaboration (p: 0.943), the practice of waste management (p: 0.155), supervision and staff monitoring (p: 0.527), training and education (p: 0.656) and effective medical waste management. Its focus on the northern part of Bangladesh introduces regional specificity, potentially limiting the applicability of results to other regions. The knowledge-sharing practices for waste management among medical staff are examined within this research, along with the relationship between attitude, awareness, and knowledge, staff supervision and monitoring, practice, training, and education and effective medical waste management that have not been studied before home and abroad. This analysis highlights the critical need for an integrated approach to medical waste management, emphasizing the importance of continuous education, open communication, and cultivating a culture that prioritizes environmental sustainability. The insights from this study offer practical recommendations for healthcare institutions to improve their medical waste management practices, ultimately leading to enhanced health outcomes and better environmental protection.

This study investigates the pivotal areas where Artificial Intelligence (AI) integration in healthcare warrants further exploration, leveraging insights from Boston Specialists, a forefront healthcare provider in AI adoption. Employing a qualitative case study approach, enriched by in-depth interviews and comprehensive literature reviews, we identify three main domains for potential AI expansion: scheduling efficiency, clinical documentation, and AI-driven medical research. Our results underscore the substantial enhancements AI brings to operational workflows and patient care, notably through improved scheduling systems, accuracy in medical documentation, and the facilitation of data-driven research methodologies. These findings suggest a critical need for healthcare institutions to further invest in AI technologies, focusing on these key areas to harness AI's full potential in personalizing care, optimizing efficiency, and advancing medical knowledge. The study concludes with a call for continued investigation into AI's integration within healthcare settings, emphasizing the importance of a supportive organizational infrastructure, ethical considerations, and data security in realizing AI's transformative impact on healthcare delivery and patient outcomes.

Medical Trust-Network is one of the most promising fields of study in network science. Establishment of trust within medical entities ensures better treatment and increases better medical facilities. The word ‘Trust’ signifies a very important behavioral aspect between any human entities, especially among doctors and patients. To represent such relationships Trust Network Models are built to express the interactions between human entities within such networks. Though the idea of a Trust-Network has traditionally been one of the major areas of research, yet the concept of a medical trust network model is relatively a new domain. In this paper, we introduce an overall multilayered Trust Network to represent the entire healthcare architecture. More specifically our model is based on an evolutionary graph system with a discrete relationship between the three most important entities of any healthcare system, namely – Doctors, Departments, and Hospitals. Observations indicate that based on our model, the medical healthcare system is a multilayered model unlike a feed-forward model as indicated by previous studies.

Emergency Medical Response Systems (EMRS) play a vital role in delivering medical aid during disasters. In Serbia, these systems encounter several obstacles due to economic limitations, scarce resources, and ongoing healthcare reforms, all of which affect their performance. This study focuses on examining the risk factors and effectiveness of Serbia's EMRS, identifying systemic issues, and proposing enhancements to improve emergency preparedness for disasters. A survey was conducted across healthcare institutions in Serbia to gather comprehensive insights. The survey explored various aspects, including organizational structures, resource distribution, communication systems, and the speed of emergency responses. Statistical methods such as Pearson's correlation, multivariate regression analysis and chi-square tests were utilized to interpret data collected from 172 healthcare institutions. The multivariate regression analysis of EMS organization identified that factors such as the structuring of working hours and shift patterns are significant predictors, contributing to small but meaningful variations in various EMS outcomes. In contrast, other factors, such as financial resources and the availability of ambulance vehicles, showed more targeted significance depending on the specific EMS aspect being analyzed. Institutions with written mass casualty plans and procedures demonstrate superior effectiveness in EMS activities, excelling in resource allocation, operational continuity, and emergency preparedness, particularly through enhanced coordination and specialized systems for managing large-scale emergencies. The findings highlighted notable disparities in how EMRS are organized, with only 46% of institutions having specific emergency departments. Resource limitations were evident, as many facilities operated with minimal staff and outdated equipment. The communication systems revealed weaknesses, with just 54% having established protocols for handling emergency calls. Response times frequently surpassed international standards, which negatively affected patient outcomes. Additionally, the study found training deficiencies, with 68% of participants expressing a need for further education. Serbia’s EMRS are significantly impacted by systemic issues such as insufficient funding, disjointed service delivery, and inadequate training. Overcoming these challenges necessitates a comprehensive approach that includes boosting financial support, implementing standardized protocols, and fostering enhanced collaboration across different sectors.

Background: Simulation plays a crucial role in health studies, as it helps medical students apply their theoretical knowledge in real-life situations. Moulage is one of the techniques that helps in making simulation more realistic or high-fidelity. It uses special effects to emulate wounds for a better understanding of what the wound is like visually. Still, moulage is expensive, time-consuming, resource-intensive, and requires the training of staff, which is why we need to find low-cost substitutes for moulage materials. Method: When searching the database “PubMed” for the terms “Low-cost and Medical moulage”, we retrieved 222 studies, out of which when excluding results not related to low-cost, we obtained 62 studies, from which when removing studies that do not contain information regarding moulage, we found two papers, after referring to citations and cited articles of those papers, we ended up with six studies. Based on the selected articles and additional articles sourced from their reference list, a total of 11 studies were included in the review. Results: We understand that moulage is a technique that helps make simulations come alive, but the resources required to use it are at times, expensive, which is why we need to find methods to do low-cost moulage, and many studies address that it can be as simple as using homemade ingredients. Students from a previous study have talked about their opinions regarding the realistic component of moulage and whether if it is any different from other moulages. Most of the students agreed that the moulage ranked well in face and content validity. However, further innovations must be introduced in the field to be widely spread and lead to newer opportunities. Conclusion: Although the research done under moulage is limited, it is accepted that moulage is helpful for simulation-based studies and that low-cost moulage can help make medical studies a better experience for students studying it. Students have a favorable opinion on the realistic aspect of the low-cost moulage applied to them. Newer methods can be introduced to moulage, and it can be implemented in low-income countries.

The integration of artificial intelligence (AI) into medical imaging has guided in an era of transformation in healthcare. This literature review explores the latest innovations and applications of AI in the field, highlighting its profound impact on medical diagnosis and patient care. The innovation segment explores into cutting-edge developments in AI, such as deep learning algorithms, convolutional neural networks, and generative adversarial networks, which have significantly improved the accuracy and efficiency of medical image analysis. These innovations have enabled rapid and accurate detection of abnormalities, from identifying tumors during radiological examinations to detecting early signs of eye disease in retinal images. The article also highlights various applications of AI in medical imaging, including radiology, pathology, cardiology, and more. AI-based diagnostic tools not only speed up the interpretation of complex images but also improve early detection of disease, ultimately delivering better outcomes for patients. Additionally, AI-based image processing facilitates personalized treatment plans, thereby optimizing healthcare delivery. This literature review highlights the paradigm shift that AI has brought to medical imaging, highlighting its role in revolutionizing diagnosis and patient care. By combining cutting-edge AI techniques and their practical applications, it is clear that AI will continue shaping the future of healthcare in profound and positive ways.

Additive Manufacturing (AM), commonly known as 3D printing, has revolutionized various industries, including the medical field. This technology enables the creation of complex structures layer by layer, offering unprecedented customization and precision. In medical applications, AM has proven transformative in producing patient-specific implants, prosthetics, and anatomical models, facilitating better surgical planning and outcomes. Additionally, it has shown promise in bioprinting, where cells and biomaterials are used to create tissue-like structures for regenerative medicine. The ability to rapidly prototype and manufacture medical devices reduces time and costs, and enhances personalized patient care. This abstract explores the diverse applications, benefits, and challenges of AM in the medical sector, highlighting its potential to revolutionize healthcare and improve patient outcomes.

Innovation development in healthcare has paved the path towards the improvement in system efficiency, patient care and cost-effective healthcare services, increasing the overall efficiency of the healthcare system in a significant manner. Electronic medical record system has fostered interoperability and collaboration in healthcare departments by enabling different systems to exchange and use patient data. This trend has been accelerated dominantly by the pandemic, leading to increased use of telemedicine, referring specifically to the use of electronic communication to provide healthcare services remotely. Moreover, an increased prevalence towards the use of artificial intelligence and machine learning in healthcare has contributed effectively towards the rigorous and informed analysis of large amounts of data as well as to identify patterns or trends that may be useful for improving care delivery or identifying potential issues. A unified electronic medical record System that will generate competitive opportunities and success prospects with reference to enhanced interoperability in US healthcare departments, can contribute towards the improvement in the quality and efficiency of care by making it easier for healthcare providers to access and share patient information as well as reducing the risk of errors in effective patient care.

Background: Community-based medical education (CBME) is an essential component of medical education, where primary healthcare physicians (PHPs) play a crucial role. This study explores PHPs' awareness and engagement in CBME and investigates the factors influencing their participation. Methods: This mixed study was conducted in two phases. In the first phase, a qual-itative study was conducted using semi-structured interviews with PHPs, and thematic analysis related to their awareness and engagement in CBME. In the second phase, a quantitative survey was conducted among 72 PHPs pre- and post-training programs. Results: Primary healthcare physicians had a positive attitude toward community-based medical education. The participants have an acceptable level of awareness and engagement, which increased substantially (p-value = 0.03) and (p-value = 0.003), respectively. Logistic analysis indicated that non-Saudi physicians were likelier to participate in the CBME (p-value=0.001). Professions and academic experiences influence their willingness and engagement to participate in CBME (OR= 7.5, p-value=0.001) and (OR=0.21, p-value=0.001), respectively. Conclusion: The study findings highlighted the importance of increased awareness and the factors that enhance PHPs' engagement in CBME. This positive perspective of the PHPs helps build effective partnerships and facilitates the extension of the curriculum to apply CBME.

Wearable antennas are increasingly vital in modern healthcare, facilitating continuous monitoring and communication for medical purposes. These antennas are integrated into wearable devices, allowing for the transmission and reception of vital health data, such as heart rate, body temperature, and blood pressure, to medical professionals or monitoring systems in real time. This instantaneous data transmission enables timely interventions, thus improving the quality of healthcare services. This review aims to comprehensively synthesize recent research from reputable databases, focusing on the functionality and effectiveness of wearable antennas in medical applications. The primary objectives of each study were categorized, including antenna design and integration, the performance of medical wearable antenna technology, safety considerations in wearable antenna biomedicine, and the use of antennas in clinical applications and their impact. This synthesis provides valuable insights for researchers and practitioners aiming to develop and deploy wearable antennas in medical settings, ultimately enhancing healthcare delivery and patient outcomes.

The Work Ability Index (WAI) is the most widely used questionnaire for the self-assessment of working ability. Because of its different applications, shorter versions, and widespread use in healthcare activities, it is worthwhile assessing its characteristics. The WAI was distributed online among the workers of a healthcare company; the results were compared with data contained in the workers' personal health records and with absence registers. 340 out of 575 workers (59.1%) participated; 6.5% of them reported poor work ability. Exploratory factor analysis indicated that the one-factor version best described the characteristics of the WAI. The scores of the complete WAI, the shorter form without the list of diseases, and the minimal one-item version (WAS) had equal distribution and were significantly correlated. The WAI score was inversely related to age and significantly lower in women than in men, but it was higher in night workers than in colleagues due to the probable effect of selective factors. The WAI score was also correlated with absenteeism, but no differences were found between males and females in the average number of absences, suggesting that cultural or emotional factors influence the self-rating of the WAI. Workers tended to overreport illnesses in the online survey compared to data collected during occupational health checks. Musculoskeletal disorders were the most frequently reported illnesses (53%). Psychiatric illnesses affected 21% of workers and had the greatest impact on work ability. Multilevel ergonomic and human factor intervention seems to be needed to recover the working capacity of healthcare workers.

One of the challenges in the healthcare sector is making accurate forecasts across insurance years for claims reserve. The state-of-the-art envisages various methods for estimating the claims reserve but without being applied to systems that do not present huge variability and heterogeneity, such as the healthcare sector. The methodology is based on generalized linear models using the Overdispersed Poisson distribution as shown in the state-of-the-art. In this context, we developed a method to estimate the parameters of the quasi-likelihood function using a Gauss-Newton algorithm optimized through a genetic algorithm. The genetic algorithm plays a crucial role in glimpsing the position of the global minimum to ensure a correct convergence of the Gauss-Newton method, where the choice of the initial guess is fundamental. The proposed methodology has been entirely developed using MATLAB and has been applied to estimate the claims reserve in the healthcare system of the Tuscany Region in Italy, as case study. The results obtained were validated by comparing them with the state-of-the-art by measuring the confidence intervals of the Overdispersed Poisson distribution parameters. Therefore local healthcare authorities could use the proposed and improved methodology to allocate the resources dedicated to healthcare and global management.

Algorithmic systems used in healthcare contexts are primarily developed for the benefit of the public. It is therefore essential that these systems are trusted by the individuals for whose benefit they are deployed. Drawing inspiration from the principles embedded in the testing of the safety, efficacy and effectiveness of new medicinal products, concurrent design engineering and pro-fessional certification requirements, the authors propose, for the first time, a preliminary com-petency-based ‘Algorithmic Ethics’ Effectiveness Impact Assessment’ framework for developers of AI systems used in healthcare contexts. They concluded that this set of principles should en-compass the algorithmic systems ‘production lifecycle’, to guarantee the optimized use of the AI technologies, avoiding biases and discrimination while ensuring the best possible outcomes, simultaneously increasing decision-making capacity and the accuracy of the results. As AI is as good as those who program it and the system in which it operates, the robustness and trustworthiness of their ‘creators’ and ‘deployers’, should be fostered by a certification system guaranteeing the latter’s knowledge and understanding of ethical aspects as well as their com-petencies in integrating these aspects in trustworthy AI systems when used in healthcare con-texts.

Diffuse optical tomography (DOT) is an optical medical imaging method that can assess the structural properties of tissues and their functional characteristics, such as hemoglobin concentration, water content, as well as lipid concentration, via three-dimensional image reconstruction. This paper presents the theoretical basis and working principle of diffuse optical tomography. The paper explains how the optical properties of tissue can be imaged by photon migration techniques based on diffusion theory. The author presents the reasoning for near-infrared (NIR) imaging as the most effective technique in terms of quantitative recovery of spectroscopic optical parameters. This work also listed various advantages, applications, and challenges of DOT. The paper also briefly discusses current progress in near-infrared medical imaging and its future direction.

Malaysia implemented a movement control order (MCO) to curb the spread of the SARS-CoV-2 virus in March 2020. Despite healthcare services remaining operational, rising COVID-19 infections and MCO restrictions have forced healthcare professionals to seek a compromise between service capacity and standard operating procedure compliance. A cross-sectional survey was conducted among public and private sector doctors, dentists and pharmacists to determine how lockdown measures impacted healthcare services. Responses from 413 doctors, 193 dentists, and 163 pharmacists were analysed. Pharmacy services remained mostly unaffected throughout the MCO. In contrast, operational capacities for surgical and dental services were severely affected during the MCO. All service sectors reported restricting patients or accompanying individuals at the workplace, reductions in staffing capacity, and shortened patient contact time at various degrees. Many pharmacy and medical participants reported supplying extended medication supplies to patients. Adoption of virtual healthcare services was generally poor. All private service sectors suffered financial losses ranging between 59 to 75%. Periodic assessments of the healthcare system throughout the pandemic are required to identify which patients have their treatment compromised so that healthcare managers and policy makers can plan and implement appropriate interventions that help alleviate pressure within the health system.

The objective of this research project was to evaluate the effects of the addition of inorganic fillers into PEBA at various loading levels on the processing, mechanical, thermal and physical properties of the polymer. The composites investigated in this study were Pebax® 6333 SA01 MED (PEBA100) with 10 wt.%, 20 wt.% and 30 wt.% Barium Sulphate (PEBA/BaSO4) and Bismuth Oxychloride (PEBA/BiOCl) respectively. Composites were prepared using twin screw extrusion and injection moulding. Post-processing, composite samples were analysed for their mechanical properties (via tensile, impact and flexural analysis), thermal properties (via differential scanning calorimetry), rheological performance (via melt flow index) and physical properties (via density analysis and ash content testing). The results of which reveal how filler type and concentration influence PEBA composites. The results of the study suggest that BiOCl filler enhances the aesthetic properties, increases the stiffness, while maintaining some level of flexibility with minimal adverse effects on the tensile and impact strength. When comparing BiOCl to BaSO4 filled composites, it was clear that depending on the application of the polymer composite, BiOCl may provide more desirable properties. The study highlights the importance of optimising filler concentration and processing conditions to achieve desired composite properties for specific medical applications.

Background: Advances in additive manufacturing and the development of antimicrobial biopolymers facilitate the production of critical medical devices with strong and safe biocidal properties. The purpose of this study was to assess the antimicrobial efficacy, safety, and longevity of a polylactic acid-based biopolymer supplemented with a copper-based composite additive. Methods: An antimicrobial polylactic acid-based biopolymer was tested against several inoculants including Staphylococcus Aureus, MRSA, E. coli, Listeria, HCoV-229E (a SARS-CoV-2 surrogate), and HIV-1. Material safety was evaluated according to international testing standards for in vitro cytotoxicity. Results: The main findings of the present investigation showed a strong and long-lasting biocidal effect of a polylactic acid-based biopolymer embedded with a copper-based composite additive against Staphylococcus Aureus, MRSA, E. coli, Listeria, HCoV-229E (a SARS-CoV-2 surrogate), and HIV-1. Furthermore, the cytotoxicity and safety assessment of the antimicrobial biopolymer was found to be “non-toxic” and safe for human skin contact. Conclusions: The present investigation showed that the antimicrobial biopolymer exhibits strong and long-lasting biocidal properties against an array of viral and bacterial inoculants.

In the era when the market segment of Internet of Things (IoT) tops the chart in various business reports, it is apparently envisioned that the field of medicine expects to gain a large benefit from the explosion of wearables and internet-connected sensors that surround us to acquire and communicate unprecedented data on symptoms, medication, food intake, and daily-life activities impacting one’s health and wellness. However, IoT-driven healthcare would have to overcome many barriers, such as: 1) There is an increasing demand for data storage on cloud servers where the analysis of the medical big data becomes increasingly complex; 2) The data, when communicated, are vulnerable to security and privacy issues; 3) The communication of the continuously collected data is not only costly but also energy hungry; 4) Operating and maintaining the sensors directly from the cloud servers are non-trial tasks.This book chapter defined Fog Computing in the context of medical IoT. Conceptually, Fog Computing is a serviceoriented intermediate layer in IoT, providing the interfaces between the sensors and cloud servers for facilitating connectivity, data transfer, and queryable local database. The centerpiece of Fog computing is a low-power, intelligent, wireless, embedded computing node that carries out signal conditioning and data analytics on raw data collected from wearables or other medical sensors and offers efficient means to serve telehealth interventions. We implemented and tested an fog computing system using the Intel Edison and Raspberry Pi that allows acquisition, computing, storage and communication of the various medical data such as pathological speech data of individuals with speech disorders, Phonocardiogram (PCG) signal for heart rate estimation, and Electrocardiogram (ECG)-based Q, R, S detection. The book chapter ends with experiments and results showing how fog computing could lessen the obstacles of existing cloud-driven medical IoT solutions and enhance the overall performance of the system in terms of computing intelligence, transmission, storage, configurable, and security. The case studies on various types of physiological data shows that the proposed Fog architecture could be used for signal enhancement, processing and analysis of various types of bio-signals.

The last wave of Artificial Intelligence is dedicating particular emphasis to the line of explainability research. The potential of Explainable Artificial Intelligence (XAI) in producing trustworthy computer-aided-diagnosis systems and its usage for knowledge discovery are collecting interest in the Medical Imaging (MI) community to support the diagnostic process and the discovery of image biomarkers. Most of the existing XAI applications in MI were focused on interpreting the predictions returned by deep neural networks, typically including attribution techniques with saliency map approaches and other feature visualization methods. However, these are often criticized for providing incorrect and incomplete representations of the black-box models’ behaviour. This raises the attention in proposing models intentionally designed to be self-explanatory. In particular, part-prototype (PP) models are interpretable-by-design computer vision (CV) models that base their decision process in learning and identifying representative prototypical parts from the input images, and they are collecting increasing interest and results in MI applications. This narrative review provides a summary of existing PP networks, their application in MI analysis and current challenges.

Background: Gender stereotypes and biases can influence perceptions of competence and suitability for certain medical specialties. Empathy is an important component of an optimal doctor-patient relationship. The scope of our study is to verify the correlation between “empathetic" behavioral style with attention and sensibility to the gender differences of patients of the medical students. Methods: An online survey was conducted using the Jefferson Scale for Empathy (JSE), to measure empathy in the context of health professions education and patient care; and the Nijmegen Gender Awareness in Medicine Scale (N-GAMS), which measures attitudes and assumptions about gender. A total of 234 students (52.1% M; mean age: 22.68±2.48) from Medicine and Surgery at the University of Salerno (Italy) participated, of whom n° 175 were third-year students and n° 59 were fifth-year students. Results: The JSE score shows that male students have higher scores (77.29±12.38) than females (75.91±10.39). Conversely, female students have higher perspective-taking (JSE Factor 1: Male= 51.26±11.84; Female= 52.72±11.88). In addition, third-year students are much more empathetic than their fifth-year colleagues (JSE Score: 3°ys= 77.35±11.46; 5°ys= 74.49±11.33). With reference to the GS, we found that male students have greater sensitivity than their female colleagues (GS: Male= 2.67±0.68; Female= 2.37±0.48); conversely, they have higher scores of gender stereotype towards patients (GRIP: Male= 2±0.88; Female= 1.59±0.61) and doctors (GRID: Male= 1.88±0.89; Female= 1.64±0.63). Also, the third-year students compared to their fifth-year colleagues are characterized by greater gender sensitivity (GS: 3°ys= 2.57±0.62; 5°ys= 2.42±0.57), less bias with respect to patients (GRIP: 3°ys= 1.77±0.79; 5°ys= 1.90±0.78) but, on the other hand, show more stereotypes and prejudices towards doctors (GRID: 3°ys= 1.77±0.81; 5°ys= 1.75±0.74). Conclusions: Humanistic attitudes, including empathy, should be instilled, and evaluated among trainees as an essential part of their postgraduate medical education.

Suboptimal knowledge of clinical pharmacology, therapeutics, and toxicology (CPT) and poor-quality prescribing are threats to patient safety. Our previous national survey of medical faculty identified limited confidence in medical student graduates’ ability to prescribe safely and an interest in a national prescribing competence assessment. Given the in-person challenges posed by the restrictions related to the COVID-19 pandemic, we aimed to re-evaluate opinions and gauge interest in e-learning resources and assessments. Using public sources, a sampling frame of medical school leaders from all 17 Canadian medical schools, including deans, vice-deans, and program directors for clerkship, residency, and e-learning, were invited to participate in a cross-sectional survey. Survey questions were finalized after several rounds of testing and analyses were descriptive.Of 1448 invitations, 411 (28.4%) individuals reviewed the survey, and among them, 278 (67.6%) completed at least one survey question with representation from all schools. While more than 90% of respondents agreed that medical students should meet a minimum standard of prescribing competence, only 17 (7.9%) could vouch for their school meeting objectives in CPT and many had significant concerns about their own or other schools’ recent graduate prescribing abilities. Given the lack of local CPT eCurricula resources, there was strong interest in a national online course and assessment in CPT. Our national survey results suggest an ongoing inadequacy of medical trainees’ prescribing competence and provide a strong endorsement for both a national online CPT course and assessment during medical school.

Background: Serious games are conceptualized as a broad topic and overlap segments of more modern forms of education: e-learning, edutainment, game-based learning, and digital game-based learning. Serious Games aligns with digitalization and the modern era and creates novel opportunities for learning and assessment in medical education. Escape rooms, a type of serious games, merge mental and physical aspects to reinforce critical skills useful in daily life. It challenges logic and reasoning and demands careful analysis of situations to correlate and solve different stages of the escape room under pressurized, timed conditions. Furthermore, it serves as an adequate environment to build problem-solving skills, communication skills, and leadership skills through the collaboration of people to achieve a common goal. The aim of this study was to investigate the applications of escape rooms in Medical Education. Method: This study investigated the applications of escape rooms in medical education. Serious games are expanding in education and have attained great relevance due to their intriguing and intrinsically motivating attributes. Within serious games, we focused on escape rooms in which participants are locked in a room, faced with puzzles that must be solved to ‘escape the room’. Compiling the data from the first 100 hits of medical application of escape rooms, we found 72 cases and categorized them by year, specialty, participants structure, simulation experience, and design. Results: We reported on escape rooms in medical education by the year in which they were reported, the medical specialty, the participant structure, grouped or individual, the experience design; real, hybrid, or digital, and the modality of the delivery. 72% of the escape rooms focused on four main areas: nursing education (25.0%), emergency medicine (22.2%), pharmacy (12.5%), and interprofessional education (12.5%). Most of the escape rooms had a group-based physical design and little attention was given to provide a detailed description of the design considerations, such as the pathway type (linear, semi-linear, open). Conclusion: Escape rooms are applied in a wide range of medical education areas. In Medical Education, group-based on-site escape rooms with a focus on nursing, emergency medicine, pharmacy and interprofessional education dominates the implementation landscape. To further advance the field, stronger emphasis on making explicit the design considerations will advance the research and inform implementations.

This study delves into the dynamic field of medical education research, emphasizing the integration of research training within medical curricula. It seeks to understand the impact of such integration on the competencies of future medical professionals. The primary aim is to systematically categorize and analyze the current trends and future directions in medical education research. This involves assessing the influence of research training on medical students' skills and the methodologies used in such research. Methods: The research employs an extensive bibliographic literature review across multiple databases. It classifies studies into categories like experiential or case studies, editorials, and original research articles. This classification is based on criteria such as geographical location, research objectives, theoretical frameworks, and methodologies. Results: Findings reveal a diverse landscape in medical education research, with a significant emphasis on research training. The research showcases varying methodologies and approaches used globally, highlighting the thematic focus and geographical distribution of these studies. Conclusion: Medical education research is a globally expansive and evolving field. It underscores the importance of continuous investigation, particularly focusing on integrating research elements at curricular levels and exploring innovative educational strategies. The study also points out potential gaps in research, especially in underrepresented regions, indicating directions for future research efforts.

Recent developments in flexible printed heaters (FPH) for wearable thermal applications, driven by the advancement of printed electronics, show great promise in revolutionizing patient care through the development of wearable flexible heaters for medical applications. Wearable heaters with high thermal stability, heat uniformity, safety, flexibility, comfort, biocompatibility, and power efficiency are desirable for stand-alone medical thermotherapy applications. This paper reviews recent advancements in the design of FPHs for wearable thermal applications. Materials for FPHs, fabrication methods, designs, temperature control mechanisms, medical applications, and performance analysis of specific FPHs are all thoroughly discussed. Materials for FPHs, such as conductive and substrate materials, have received special attention, along with the heater design parameters. Finally, the challenges and future directions for developing FPHs for wearable medical applications are addressed.

Thermal sterilization is generally avoided for 3-D printed components because of the relatively low deformation temperatures for common thermoplastics used for material extrusion-based additive manufacturing. 3-D printing materials required for high-temperature heat sterilizable components for COVID-19 and other applications demands 3-D printers with heated beds, hot ends that can reach higher temperatures than polytetrafluoroethylene (PTFE) hot ends and heated chambers to avoid part warping and delamination. There are several high temperature printers on the market, but their high costs make them inaccessible for full home-based distributed manufacturing required during pandemic lockdowns. To allow for all these requirements to be met for under $1,000, the Cerberus – an open source three-headed self-replicating rapid prototyper (RepRap) was designed and tested with the following capabilities: i) 200^oC-capable heated bed, ii) 500^oC-capabel hot end, iii) isolated heated chamber with 1kW space heater core and iv) mains voltage chamber and bed heating for rapid start. The Cereberus successfully prints polyetherketoneketone (PEKK) and polyetherimide (PEI, ULTEM) with tensile strengths of 77.5 and 80.5 MPa, respectively. As a case study, open source face masks were 3-D printed in PEKK and shown not to warp upon widely home-accessible oven-based sterilization.

This study aimed at assessing the extent to which the Saudi general population has embraced digital health medical applications to meet their health-related needs so that the Saudi Ministry of Health and government can appropriately be guided on scaling up of digital health across the country. As such, this study was guided by the question of to what extent do the Saudi people use digital health mobile-based applications?. This was a cross-sectional study utilizing snowballing sampling approach. Frequencies, Chi-square, and Spearman rank correlation statistics were used to offer descriptive and inferential analysis of the variables. The majority of the participants were economically able to afford smart devices that have medical apps, had at least an app on such devices, and highly regarded the benefits of the apps. Unfortunately, their understanding of how to use such apps was limited and this posed a barrier to embracing digital health alongside difficulty downloading apps, and medical ethical concerns. Although there is a willingness, extra effort is needed from the Saudi Ministry of Health and government to promote the uptake of digital health in Saudi Arabia.

The contemporary landscape of eHealth is characterized by major concerns related to electronic medical records (EMRs). In an EMR, critical patient health information gets its own repository, which is the core of the eHealth system. Notably, the EMR not only retrieves health information generated in ambulatory clinical settings but also includes court-generated records. These overlapping records assume the role of a foundational data source for a comprehensive electronic health record (EHR). This scholarly review sheds light on recent trends in medical records and associated challenges, while at the same time providing insights into Saudi Arabia’s targeted approaches to healthcare delivery. Additionally, the talk expands to include a description of blockchain technology and its underlying conceptual framework. This demonstration positions blockchain technology as a promising approach that requires consideration for future use in the healthcare system.

The traditional manual recording of vaccination records in Germany faced challenges during the COVID-19 pandemic, prompting the introduction of a Covid smartphone app with QR codes. However, this solution brought new challenges, emphasizing the need for a centrally managed European digital vaccination record for efficiency and validity. Thus, this study assesses the feasibility of using the HL7 FHIR standard in the healthcare industry for implementing a digital vaccination pass management and monitoring system. The system aims to offer convenience and improved efficiency for both patients and healthcare providers while promoting interoperability with other healthcare systems. We developed a prototype using modern technologies, such as React, Quarkus, and Keycloak, evaluating the applicability of FHIR in promoting interoperability within the healthcare industry. Results indicate potential benefits for patients and healthcare providers, offering secure access to immunization records, personalized recommendations, and streamlined management. However, challenges in integrating nuanced vaccination processes into the standardized FHIR system, necessitating custom extensions, and issues with manual data entry and identity provider integration, pose obstacles. Despite these challenges, the study suggests that implementing HL7 FHIR can enhance efficiency, data accessibility, and accuracy in the vaccination process, supporting broader digitization efforts in the German healthcare system and beyond.

A significant attention has been made to the accurate detection of diabetes which is a big challenge for the research community to develop a diagnosis system to detect diabetes in a successful way in the IoT e-healthcare environment. Internet of Things (IOT) has emerging role in healthcare services which delivers a system to analyze the medical data for diagnosis of diseases applied data mining methods. The existing diagnosis systems have some drawbacks, such as high computation time, and low prediction accuracy. To handle these issues, we have proposed a IOT based diagnosis system using machine learning methods, such as preprocessing of data, feature selection, and classification for the detection of diabetes disease in e- healthcare environment. Model validation and performance evaluation metrics have been used to check the validity of the proposed system. We have proposed a filter method based on the Decision Tree (Iterative Dichotomiser 3) algorithm for highly important feature selection. Two ensemble learning Decision Tree algorithms, such as Ada Boost and Random Forest are also used for feature selection and compared the classifier performance with wrapper based feature selection algorithms also. Machine learning classifier Decision Tree has been used for the classification of healthy and diabetic subjects. The experimental results show that the Decision Tree algorithm based on selected features improves the classification performance of the predictive model and achieved optimal accuracy. Additionally, the proposed system performance is high as compared to the previous state-of-the-art methods. High performance of the proposed method is due to the different combinations of selected features set and GL, DPF, and BMI are more significantly important features in the dataset for prediction of diabetes disease. Furthermore, the experimental results statistical analysis demonstrated that the proposed method would be effectively detected diabetes disease and can easily be deployed in IOT wireless sensor technologies based e-healthcare environment.

Introduction: In an era of increasing public awareness regarding the pivotal role of nutrition in the onset and progression of chronic degenerative diseases, there is a growing demand for information and assistance pertaining to the intricate relationship between diet and disease. Nutritional practices, therefore, emerge as a fundamental element in the prevention and management of these maladies, necessitating a proactive response from healthcare professionals (HCP). This study sought to evaluate the impact of participation in a Culinary Medicine (CM) program on Mediterranean diet adherence, food management skills, culinary proficiency, and counseling confidence among HCP. Methods: A mixed-methods pilot implementation program (PIP) was meticulously designed and executed, engaging a cohort of 20 HCP recruited from Hospital Clinic Barcelona. The program unfolded at the Alícia Foundation kitchen-lab and encompassed a series of interactive, hands-on sessions that delved into the realms of gastronomy, food management, culinary skills, and culinary diet therapy, with a specific focus on prevalent diseases and their prevention, treatment, and care. Tailored questionnaires were administered to all participants both before and after the PIP. Results: Of the 20 participants, 14 successfully completed the study, comprising 86% women, 86% aged above 40, 71% nurses, and 7% medical doctors. Interestingly, 86% of the participants had previously received nutrition training, whereas only 14% had received culinary training. Following the completion of the program, there was a remarkable improvement in adherence to the Mediterranean diet (p < 0.01). However, no statistically significant improvements were observed in food management and culinary skills or counseling confidence (p > 0.5). Despite the absence of statistical significance, there was a noteworthy trend towards greater advocacy for dietary changes before resorting to medication, along with enhanced confidence in providing nutritional and culinary guidance to patients. Conclusion: The findings from this study underscore the potential of hands-on CM training as a vital component of nutrition education for HCP. While statistically significant improvements in certain domains were not observed, the program did demonstrate its ability to influence attitudes, knowledge, and behaviors related to healthy cooking and eating for both HCP themselves and their patients. Given these promising trends, future studies with a larger sample size must be performed to further elucidate the impact of CM training on HCP and its potential benefits for public health.

Currently, Pythagorean fuzzy sets (PFSs) have been widely applied in various fields due to their substantial advantages in expressing and dealing with uncertainty. However, measuring the similarity and difference between PFSs effectively remains an unresolved issue. Inspired by Tanimoto similarity, we propose a novel set of similarity and distance measures for PFSs. We delve into the theoretical properties of the proposed measures and compare it with existing PFSs measures. Numerous numerical examples validate their rationality and effectiveness. Furthermore, our experimental findings suggest that in contrast to existing measures, the introduced measures successfully circumvent various counter-intuitive issues encountered by current measures, and yield more pronounced outcomes in the discrimination of different fuzzy sets. This enhances the uniqueness and superiority of our measures. Finally, we developed two decision models based on the proposed measures and validated their applicability in three applications.

Mechanical ventilation systems, which are used for breathing support when a person is not able to do it by their own, requires a device for measuring the air flow to the patient in order to monitoring and a assure the magnitude establish by a medical staff. Flow sensors are the conventional devices used for the air flow measuring; however, there were not available in Peru, because of the international demand during COVID-19 pandemic. In this sense, a novel air flow sensor based on orifice plate and an intelligent transducer stage were developed as an integrated design. Advanced methodologies in simulations and experiments using specially designed equipment for this application were carried out. The obtained data was used for a mathematical characterization and dimensions validation of the integrated design. The device was tested in its real working conditions, it was implemented in a breathing circuit connected to a low-cost mechanical ventilation system based on cams. Results indicate that the designed air flow sensor/transducer is a low-cost complete medical device for mechanical ventilators able to provide satisfactorily all the ventilation parameters air flow, pressure and volume over time by measuring the air flow and calculating the others. Furthermore, this device provides directly a filtered equivalent electrical signal for a display or a computer.

The Internet of Things (IoT) has a growing presence in society's daily lives. These lightweight devices can be easily deployed and maintained, enabling extensive adoption in different environments. Furthermore, one of the most promising areas for using IoT devices is healthcare, comprising devices referred to as the Internet of Medical Things (IoMT). Several examples of healthcare services are supported by IoMT devices, e.g., continuous health monitoring. Conversely, there is an increasing concern with the cybersecurity aspects of these devices, and several attacks against IoT infrastructures have been launched in the past few years. These cybersecurity concerns also apply to healthcare applications, where the tradeoff between the benefits and security of IoMT devices must be observed. Given the complexity and amount of data IoMT network traffic generates, advanced methods become especially useful in these environments. Although Machine Learning (ML) brings various techniques and solutions to improve cyberattack detection, prevention, and mitigation, essential features are not addressed in the current state-of-the-art benchmark dataset contributions. Thereupon, the main goal of this research is to propose a realistic benchmark dataset to enable the development and evaluation of IoMT security solutions. In order to accomplish this, 18 attacks were executed against an IoMT testbed composed of 40 IoMT devices (25 real devices and 15 simulated devices), considering the plurality of protocols used in healthcare (e.g., Wi-Fi, MQTT, and Bluetooth). These attacks are categorized into five classes: DDoS, DoS, Recon, MQTT, and spoofing. This effort aims to establish a baseline complementary to the state-of-the-art contributions. The outcome supports researchers in investigating and developing new solutions to make healthcare systems more secure using different mechanisms (e.g., machine learning - ML). This research goes beyond merely conducting attacks on IoMT devices. We also attempt to capture the lifecycle of these devices in different vital phases, from the moment they join the network until they leave, which is called profiling. Profiling allows the different classifiers to identify anomalies of each device individually in the healthcare network. The CICIoMT2024 dataset has been published on CIC's dataset page, making it available for other researchers to use.

This study introduces a specialized Automatic Speech Recognition (ASR) system, leveraging the Whisper Large-v2 model, specifically adapted for radiological applications in French language. Our methodology focused on adapting the model to accurately transcribe medical terminology and diverse accents within the French language context, achieving a notable Word Error Rate (WER) of 17.121%. The research involved extensive data collection and preprocessing, utilizing a wide range of French medical audio content. The results demonstrate the system's effectiveness in transcribing complex radiological data, underscoring its potential to enhance medical documentation efficiency in French-speaking clinical settings. The discussion extends to the broader implications of this technology in healthcare, including its potential integration with Electronic Health Records (EHRs) and its utility in medical education. The study also explores future research directions, such as tailoring ASR systems to specific medical specialties and languages. Overall, this research contributes significantly to the field of medical ASR systems, presenting a robust tool for radiological transcription in the French language and paving the way for advanced technology-enhanced healthcare solutions.

This investigation pioneers an examination of the scarcely explored terrain of social diversity in medical education, assessing the complex impacts of socioeconomic status (SES), prior working experiences, and completed apprenticeships on a spectrum of psychological and academic facets among first-year medical students (n = 336) in an urban university setting. By utilizing a systematic and detailed approach, the study illuminates prior anatomical knowledge and various psycholog-ical constructs, marking a significant stride into a domain where knowledge remains profoundly limited. Analyses indicated that SES significantly affects financial anxiety (F(4, 331) = 17.391, p < .001) and academic behavioral confidence (F(4, 331) = 4.323, p = 0.002). Students with prior working experience reported higher self-perceived clinical experience but lower A-level grades (t(279.459) = -6.690, p < .001), competence in natural sciences (t(321.045) = -3.178, p = 0.002), and online competence (t(319.429) = -2.026, p = 0.044). Those who completed an apprenticeship showed higher resilience, academic confidence, self-efficacy, and greater concerns about balancing studies and work (t values ranging from 2.020 to 3.158, p < 0.05). Correlation analysis revealed a positive relationship between resilience (RQS) and coping with academic stress (CAS) (r = 0.632, p < .001), as well as between resilience and academic behavioral confidence (ABC) (r = 0.608, p < .001). Negative correlations were observed between resilience, coping with academic stress, academic confidence, and cognitive test anxiety (CTA) (r values from -0.235 to -0.404, p < .001). The findings emphasize the need for tailored support for students from diverse SES backgrounds and with varying expe-riences. The study highlights the value of a comprehensive approach in medical education, con-sidering the diverse backgrounds and experiences of students. Future research should explore the long-term impact of these factors on professional competencies and patient care, leveraging the diversity of the student body for a holistic educational experience.

Background: medical devices are designed, tested and placed on the market in a highly regulated environment. Wearable sensors are crucial components of various medical devices: design and validation of wearable sensors, if managed according to international standards, can foster innovation while respecting regulatory requirements. Material and methods: the purpose of this paper is to take into consideration the upcoming EU Medical Device Regulation 2017/245 and the current and future IEC and ISO standards that set methods for design and validation of medical devices, with a focus on wearable sensors. Risk classification according to the regulation is described. The international standards IEC 62304, IEC 60601, ISO 14971 and ISO 13485 are reviewed to define regulatory restrictions during design, pre-clinical validation and clinical validation of devices that include wearable sensors as crucial components. Results: current and future regulatory restrictions are described, and an integrated method for design planning, validation and clinical testing is described Discussion: application of this method to design wearable sensors should be evaluated in the future in order to assess its potentially positive impact to fostering innovation and to the time-to-market of the device.

The development of new medical monitoring applications requires precise modeling of the human body effects as well as simulating and emulating realistic scenarios and conditions. The first aim of this paper is to develop realistic and adjustable human body 3D emulation platforms which could be used for evaluating emerging microwave-based medical monitoring/sensing applications such as the detection of brain tumors, strokes, breast cancers as well as for capsule endoscopy studies. The new phantom recipes are developed for microwave ranges for the realistic shaped phantom molds. The second aim is to validate the feasibility and reliability of the phantoms for practical scenarios with electromagnetic simulations using tissue layer models and biomedical antennas. The third aim is to investigate the impact of the water temperature in the phantom cooking phase on the dielectric properties of the stabilized phantom. The evaluations show that the dielectric properties of the developed phantoms correspond closely to those of real human tissue. The error in dielectric properties varies between 0.5-8%. In the practical scenario simulations, the differences obtained with phantoms-based simulations in S21 parameters are 0.1-13dB. However, the differences are smaller in the frequency ranges targeted for medical applications.

This paper investigates the effects of Inter-generational co-residence on health care market, and labor market outcomes, to see whether or not living under the same roof with at least one parent matters in health care market, and labor market behaviors in post-Affordable-Care Act (ACA) USA. The adopted analytical strategy involves not only looking at the gender differences in co-residence, and its effects on outcomes in the two markets, but also accounting for co-residence endogeneity following the recent literature. Unlike the recent literature that relies on instrumental variables methods, this study adopts a switching regression approach, defining inter-generational co-residence as an endogenous selection process using a binary probit equation, and modeled jointly with the extensive margins and intensive margins in the two markets. This novel approach results in a recursive trivariate probit model for each market, and estimated using penalized maximum likelihood methods. The results suggest that ACA by reorganizing the US health care market, seems to have reduced significantly disparities in health care access among males and females based on race, region of residence, place of birth, and citizenship. However not only do we observe significant differences in inter-generational co-residence status between males and females, we also find significant inequalities in the effects of co-residence on health care market, and labor market outcomes. In fact, co-residence is found to increase health care expenditure by 56.7% among females, while this figure increases to 74.2% among males. In addition co-residing individuals, while spending 69.7% more on health care annually are 1.22 times more likely to access health care, but 31% less likely to use health care intensively during the year. In the labor market, co-residence is found to reduce significantly hours of weekly labor supplied by 41% for females, and 55.6% for males. Furthermore co-residing individuals, while not significantly different in their likelihood of labor force participation, are 1.52 times less likely to work full time once they decide to participate, and also spend about 55.4% less time working in the labor market in post-ACA USA.

Care coordination (CC) for children with special healthcare needs and medical complexity (CSHCN-CMC) is challenging, and medication management is especially difficult for providers, parents/caregivers, and patients alike. While numerous strategies for CC have been suggested and implemented, barriers to medication optimization remain. The report describes the creation of a pediatric clinical pharmacotherapy practice, related standard operating procedures to assure consistent application of screening tools and care provision through comprehensive medication management (CMM), and establishment of a collaborative practice agreement (CPA) to guide drug therapy delegation, monitoring, and modification. The methodology of a prospective case series is also presented to highlight drug therapy problems and their resolution in CSHCN-CMC. Future opportunities to expand the practice for engagement in population health management as well as prior authorization activities on behalf of physicians will be discussed.

Inequality of health service for different specialty categories not only occurs in different areas inequality of health service for different specialty categories in the world, but also happens in the online service platform. In the online health community (OHC), health service was often of inequality for different specialty categories, including both online views and medical consultation for offline registered service. Moreover, how the factor city-level impacts the inequality of health service in OHC is still unknown. We designed a causal inference study with data on distributions of serviced patients and online views in over 100 distinct specialty categories on one largest OHC in China. To derive the causal effect of the city-levels (two levels inducing 1 and 0) on the Gini coefficient, we matched the focus cases in cities of rich healthcare resources with the potential control cities. For the Gini coefficient of serviced patients in over 100 specialty categories, the average treatment effect of level-1 cities is 0.470, which is 0.029 higher than that of the matched group. Similarly, for the Gini coefficient of online views, the average treatment effect of Level-1 cities is 0.573, which is 0.016 higher than that of the matched group. For each of the specialty categories, we also estimated the average treatment effect the specialty category’s Gini coefficient ( ) with the balanced covariates. The results support the argument that the total Gini coefficient of all the doctors in OHC shows that the inequality of health service is still very serious. This study contributes to the development of the theoretically grounded understanding of the causal effect of city-level on the inequality of health service in an online to offline healthcare service setting.

Introduction After the first use of infliximab in Crohn’s disease in 1995, the wide scale introduction of anti-tumour necrosis factor alfa (anti-TNF alfa) medications revolutionized the treatment of inflammatory bowel diseases (IBD’s). During the last two decades an increased number of molecules with multiple mechanisms of action were approved for the treatment of IBD with substantial increase of the costs of related to therapy. The increasing costs and access to therapy became a concern of payers and regulators but also for healthcare professionals. Biosimilars are biologic medical products that are highly structurally identical to their reference products and without any clinically meaningful differences in immunogenicity, safety or effectiveness. The introduction of biosimilars was seen as a way to provide a lower-cost alternative to the originator anti-TNF molecules and hence to increase treatment access and availability for patients. Material and methods This an observational, prospective study conducted in two IBD centers in Bucharest. The study included 53 patients, 27 male(M) and 26 female(F), diagnosed with UC or BC according to standard clinical,endoscopic, radiological, histological criteria that were non medically switched to a biosimilar. All patients completed at least the induction treatment with the originator adalimumab and they were clinically stable. After switch they received one of the market available biosimilars of Adalimumab(Hukyndra, Imraldi or Hyrimoz). For each patient, the following data were collected: age, sex, BC or UC diagnosis, previous and current therapy, clinical evolution, endoscopic scores as well as several biological markers. Aim The primary objective was the maintenance of clinical remission at twelve months after switching the original Adalimumab treatment to the biosimilar Adalimumab. The secondary objectives were to evaluate the presence of adverse effects and the treatment persistence at one year. Results In our population, there were 42 patients with Crohn's disease and 11 with ulcerative colitis who switched from the originator adalimumab to a biosimilar Adalimumab. The average age was 44,07 years old for patients with BC and 51,72 years old for patients with UC. No significant differences were found in terms of CF and CRP levels at 6 and 12 months after changing the originator biologic treatment to a biosimilar. Only one patient required changing the biological treatment, following the clinical and biological loss of response. The main adverse effect reported by patients was pain at the injection site. Of the 53 patients, only 2 patients reported pain at the injection site, but this was considered not significant because the patients had a BMI below 20 and they also reported the same symptom when administering the originator. One patient reported experiencing abdominal pain and rectal bleeding immediately after switch, but no recurrence was observed clinically and endoscopically. Conclusion: This observational study is the first carried out in Romania that shows that the after the non-medical switch, biosimilars of Adalimumab were as efficient as the originator Adalimumab in the clinical practice of patients with IBD. These results support that conclusion that the large-scale use of biosimilars does not significantly affect the effectiveness of the therapy and the safety of the patient.

Gaia-X, a European initiative, aims to create a digital sovereignty framework for service ecosystems in the future internet. Its applicability to the health domain has been explored in the Gaia-X-Med project, which aimed to establish a common dataspace for various medical use cases based on Gaia-X principles. This paper presents the approach to secure authentication and digital contract negotiation central to this endeavour and discusses the challenges that arose during adoption of the Gaia-X framework, in particular relating to the strict requirements of the European healthcare domain with regards to privacy and consent regulations. By exploring the practical implications of Gaia-X in the healthcare context, this paper aims to contribute to the ongoing discussions surrounding digital sovereignty of both citizens and corporations, as well as its realization via future internet technologies.

Interdisciplinary conferences play a vital role in advancing explainable Artificial Intelligence (AI) within increasingly intersecting healthcare and computational biology arenas. Challenges result-ing from algorithmic bias and the necessity for domain-specific Explainable AI (XAI) techniques underscore the increasing significance of transparent and interpretable AI systems used in patient care. Collaborative efforts between clinicians, data scientists, and various stakeholders are nec-essary to innovate solutions tailored to healthcare needs. Specialized conferences may foster these interdisciplinary interactions, providing platforms for knowledge exchange, networking, and collaborative partnerships. The legal, ethical, and societal dimensions of medical AI advocate for an integrative approach that aligns technological advancements with patient-centered care val-ues. The role of specialized conferences is therefore essential for shaping future directions in ex-plainable AI and computational biology that contribute to improved patient outcomes and healthcare innovations.

The sustainability of social security is increasingly important to countries worldwide, yet the impact of regulation on social security remains controversial. Most scholars and policymakers focus primarily on the influence of social regulation on social security, while to varying degrees neglecting the effects of market regulation. This study employs data on the relaxation of market regulation (RMR) from the Marketization Index of China’s Report (MICR) and balanced panel data for 31 provinces in China from 2008 to 2019. Using instrumental variable methods to address endogeneity issues in the model, we empirically evaluate the impact of China's RMR on the level of social security (SSL) and its underlying mechanisms. The conclusion indicates that for every standard deviation increase in the intensity of RMR by local governments, there is a 2.25% increase in SSL. The study also found that social security expenditure and efficiency serve as mediating variables for the impact of RMR on SSL, but it did not support the mediating role of social security fairness. These findings offer valuable insights for optimizing regulation and social security reform in China, as well as useful references for other emerging market economies in identifying priorities for their coordinated regulatory and social security reform.

The burden of hypertension remains unacceptably high globally, particularly in low- and middle-income countries (LMICs). Workplace offer enormous potential as an idea setting for early detection and treatment of hypertension among the working class. Analysis of such a Workplace Screening Programme can reveal information about its potential impact. Machine learning techniques such as k-Means Clustering are untapped tools for such analyses. We set out to deploy this tool for the analysis of our university annual medical screening of workforce for hypertension. An anonymized dataset containing the demography and blood pressure measurements values obtained from staffs of different departments/units in an academic institution was obtained. The total number of samples or data points are 1, 723 in which the input dataset contains six features, including year category (2018, 2019, 2021,2022), Department/Unit (academic and non-academic), gender (male and female), while the target output is the blood pressure status (low, normal and high) respectively. Analysis of the dataset was carried out using machine learning techniques. In this retrospective analysis, it was observed that the mean age for this working class is 42 years old. Similarly, it was discovered that hypertension was prevalent among members of staff above the age of 40 irrespective of their gender or professional category (academic or non-academic). The analysis also revealed that there was a steady decline in the prevalence of hypertension from 2018 to 2022. From the research, it is evident that the adoption of machine learning techniques for periodic analyses of workplace health status screening initiative (especially for hypertension) is effective, feasible, and sustainable to diagnose and control hypertension among the working class.

There are complex ethical dilemmas inherent in medicine teaching, particularly in clinical prac-tice involving actual patients. Questions must be raised on fulfilling medical students' training needs while still respecting patients' fundamental rights to autonomy and privacy. We aimed to assess patients' perspectives regarding medical students' involvement in their medical care. An observational, cross-sectional study was developed, and an interview-like questionnaire was ap-plied randomly to patients waiting for a consult/admitted to three distinct departments: General Surgery, Obstetrics/Gynaecology, and Infectious Diseases. Of the 77% interviewed patients who reported previous experiences with medical students, only 59% stated that they were asked for consent for their participation and 28% that students had adequately introduced themselves. Pa-tients from Gynaecology/Obstetrics were the ones who reported lower rates of these practices and were also the ones who were most bothered by students' presence, stating that they would refuse students' participation in the future. Male patients received more explanations than female pa-tients regarding the same matters. 35% of patients stated they would feel more comfortable without the medical students' presence. The study shows a need to pay closer attention to ful-filling patients' fundamental rights.

Search for the new non-invasive methods of investigating the functioning of human internal organs is an urgent task. One of these methods for assessing the functioning of the human res-piratory system is electromagnetic sensing, based on a significant difference in the dielectric permittivity of muscle tissue and air. During breathing, when the lungs are filled with air, the dielectric permittivity of the lungs decreases, which leads to a change in the level of the elec-tromagnetic signal passing through the body. Results of experiments on recording changes in the level of electromagnetic radiation passing through the human body, performed on an experimental device consisting of eight transmitting and receiving antennas located on opposite sides of the chest have been presented in the article. The possibility of visualizing the measured “pulmonograms” in the form of dynamic two-dimensional images showing the process of filling various parts of the lungs with air has been demonstrated.

Digital solutions in the field of restorative neurology offer significant assistance, enabling patients to engage in rehabilitation activities remotely. This research introduces ReMoVES, an Internet of Medical Things (IoMT) system delivering telemedicine services specifically tailored for Multiple Sclerosis rehabilitation, within the overarching framework of the STORMS project. The ReMoVES platform facilitates the provision of a rehabilitative exercise protocol, seamlessly integrated into the Individual Rehabilitation Project, curated by a multidimensional medical team operating remotely. This manuscript delves into the second phase of the study, elucidating the technology employed, the outcomes achieved, and the practical, professional, and academic implications. The STORMS initiative, as the genesis of digital telerehabilitation solutions, aims to enhance the quality of life for Multiple Sclerosis patients.

Background/Objectives Bowel endometriosis (BE) is defined as the presence of endometrial-like tissue in the muscular layer of the bowel wall. When BE does not cause severe obstruction to fecal transit, not leading to (sub)occlusive symptoms, the decision to operate becomes challenging as intestinal surgery is associated with higher complication rates and long-term bowel dysfunction. The aim of this cross-sectional study is to evaluate the quality of life (QoL) in patients with BE undergoing medical therapy or expectant management, investigating the impact of characteristics of BE nodules on QoL and intestinal function. Methods A retrospective cross-sectional analysis was conducted on 580 patients with BE who did not undergo surgery but were treated conservatively by medical therapy or expectant management between January 2017 and August 2022. The diagnosis of BE was done by transvaginal ultrasound and confirmed at double contrast barium enema. After at least one year of follow-up, QoL and intestinal function of patients were evaluated by the Endometriosis Health Profile-5 (EHP-5) questionnaire and Bowel Endometriosis Symptom score (BENS), whereas pain symptoms were assessed by the Visual Analogic Scale (VAS 0-10). Statistical analysis was performed to investigate possible associations between QoL and characteristics of bowel nodules (dimension, location, and evidence of stenosis) as well as type and length of eventual medical therapy. Results Patients with BE had a satisfying overall QoL with a mean EHP-5 score of 105.42 ± 99.98 points and VAS lower than 3 for all pain domains; additionally, they did not show a significant impartment of bowel function with mean BENS score of 4.89 ± 5.28 points. Notably, patients under medical therapy had a better QoL than patients without therapy (p

This study presents a systematic review to evaluate the effectiveness of virtual patients in enhancing clinical reasoning skills in medical education, utilizing a hybrid methodology that combines human reviewers and ChatGPT. By analyzing various studies involving conversational virtual patients, the review examines the impact of these digital tools on student learning outcomes and satisfaction. Consistent with previous systematic reviews, our findings suggest that conversational virtual patients can improve clinical competencies, particularly in history-taking and clinical reasoning. Regarding student feedback, satisfaction tends to be higher when virtual patients’ interactions are more realistic, often due to the use of artificial intelligence (AI) and natural language processing (NLP) in the simulators. Furthermore, the study compares the accuracy of AI-driven reviews with human assessments, revealing comparable results. This research highlights AI’s potential to complement human expertise in academic evaluations, contributing to more efficient and consistent systematic reviews in rapidly evolving educational fields.

Given the complexity and variability of gastrointestinal polyps, there is a growing need for more accurate machine-learning algorithms that can assist medical professionals in decision-making processes. In our study, we employed machine learning (ML) techniques to classify gastrointestinal polyps seen in colonoscopy images, that present a risk of colon cancer, affecting a large portion of the population. The dataset used in the research comprised 152 instances and included three types of lesions, totaling 76 polyps. The study consisted of applying Logistic Regression (LR) to classify gastrointestinal images. The principal motivation for choosing this algorithm consists in the fact that is preferred by many medical researchers. Another motivation consisted in the fact to compare the polyps classification accuracy of physicians and LR with optimized hyperparameters. The approached model performance was evaluated with the following metrics: Accuracy, Precision, Recall, F1_Score and Macro-average. We used the Multiclass Logistic Regression (mLR) classifier to classify polyps into hyperplastic (27.63%), serrated (19.74%), and adenoma lesions (52.63%). It should be noted that serrated polyps are hard to diagnose, even by physicians, because they have characteristics of both hyperplastic and adenoma ones. One of the objectives consisted in the study of the hyperparameters tunning of the Logistic Regression to find the best-fitted model. To check the influence of the data mix on the results obtained, for the two best models (LR with liblinear solver, L1 penalty and C = 0.01), it was performed a comprehensive statistical analysis. Based on an algorithm that admits obtaining accurate results. Such analyses are mistakenly applied in the scientific literature. The model with optimized hyperparameters achieved an accuracy score of 70.39%, indicating a reasonable level of prediction, surpassing both beginner and expert physicians and obtaining results similar to those obtained by Random Subspace and Random Forest. The model successfully classifies the hyperplastic and adenoma polyps but showed to have a more limited ability to predict the serrated ones.

Art therapy fosters emotional healing and growth. This process can offer healthcare professionals (HCPs) novel insights into patients’ medication experiences. We developed a Metaverse Art Gal-lery of Image Chronicles (MAGIC), which depicted patients’ medication experiences symbolically as hero-villain portrayals. This gallery aimed to enhance healthcare students’ learning through re-latable insights into patients’ medication therapies. A character sheet was used to craft patients’ personifications of their medication experiences. ChatGPT, NightCafe, Canva, HeyGen and Cam-tasia were used to generate hero-villain portraits based on the character traits and mounted in MAGIC, which consisted of three virtual realms, each with a unique theme. Alpha-testing among sixteen Generation Z healthcare learners indicated that the content in MAGIC enabled them to understand the concepts of medication adherence (93.7%), art therapy (87.5%) and how patients related to their medications (81.3%). Perceived playfulness (rs=0.925, p

In Morocco, cervical cancer is the second most frequent cancer among women and the third in terms of mortality. The Moroccan Health Ministry introduced the Human Papillomavirus vaccine to the national immunization program in October 2022.The study aims to evaluate the knowledge, the satisfaction level, and acceptability of HPV infection and vaccine among Moroccan medical students. We conducted a cross-sectional study from September 2021 to July 2022 among medical students above 5th year across the nine Moroccan medical universities. We shared our questionnaire through Google Forms. The descriptive data analysis was made through Google Forms and excel, and the analytic analysis was made using GraphPad Prism 8.0. We collected 636 answers. The mean age was 24.2 +/- 1.4 years old with a sex ratio (M/F) of 0.5. 3.3% (N=21) were vaccinated against HPV. The HPV infection knowledge mean score was 6.3 +/- 2 /11 (57.2% of good answers) and the vaccine knowledge mean score was 2.0 +/- 1,1 /5 (40% of good answers), with a training satisfaction rate of 7.3 +/- 2.6 /20 (36.5%). 85.8% of the participants (N= 546) were in favor of including the vaccine to the national immunization program. In conclusion, overall Moroccan medical students have an average knowledge of HPV infection and vaccine. The gap in HPV training should be filled especially in the era of the vaccine introduction. The majority of the students agree to make the vaccine mandatory, with superior rates than the other studies.

.Abstract: Indonesia, one of the Asia Pacific LMICs, has suffered from a chronic medical workforce shortage. However, there are limited published studies describing the approaches implemented by the Indonesian government regarding the recruitment and retention of the medical workforce. This case study aimed to understand the current practices for recruitment and retention of the medical workforce in Indonesian rural and remote provinces. We conducted a case study of the Maluku Province of Indonesia with document analysis and key informant interviews with officials responsible for medical workforce recruitment and retention. We used the WHO’s guidelines as an analytical matrix to examine the recruitment and retention practices under four domains, i) educational, ii) regulatory, iii) financial, and iv) professional and personal development, and classified them into University/Medical School level and Government/Non-government level. Our findings suggest that Indonesia has implemented most of the WHO-recommended medical workforce recruitment and retention strategies. However, implementation is still problematic; hence, the aim of establishing an adequate, sustainable medical workforce has not been reached. Nationwide government intervention in educational aspects is important to magnify the impact of the regional medical school initiatives. Relevant programs must be re-evaluated and re-enforced concerning significance, comprehensiveness and effectiveness for sustainable rural and remote medical workforce.

3D-printed models with high anatomic fidelity are an increasingly viable tool in simulation-based medical education. One advantage of 3D models is they provide enhanced tactile and spatial understanding of complex anatomy to develop technical skills used in minimally invasive procedures. We propose that 3D anatomical models can improve the development of Interventional Radiology vascular access skills – first described in the 1950s as the Seldinger Technique – for pre-clerkship medical students. Early adoption of 3D-printed technology in pre-clinical medical education can lead to improved student engagement and satisfaction when learning procedural techniques. This study involved creating a 3D model of the upper extremity vasculature from an anonymized CT angiogram, using it as a medical education tool for 31 pre-clinical medical students practicing the Seldinger Technique on a prefabricated venipuncture arm, and assessing student satisfaction with this form of learning. Overall, attendees responded positively to the incorporation of the 3D model in medical education to improve their anatomic understanding and application to the Seldinger Technique. These results indicate that the use of 3D models in simulation-based medical education can provide benefits to acquiring technical skills and the potential to decrease training costs without harming a patient.

Image registration (IR) is a process that deforms images to align them with respect to a reference space, making it easier for medical practitioners to examine various medical images in a standardized reference frame, such as having the same rotation and scale. This document introduces image registration using a simple numeric example. It provides a definition of image registration along with a space-oriented symbolic representation. This review covers various aspects of image transformations, including affine, deformable, invertible, and bidirectional transformations, as well as medical image registration algorithms such as Voxelmorph, Demons, SyN, Iterative Closest Point, and SynthMorph. It also explores atlas-based registration and multistage image registration techniques, including coarse-fine and pyramid approaches. Furthermore, this survey paper discusses medical image registration taxonomies, datasets, evaluation measures, such as correlation-based metrics, segmentation-based metrics, processing time, and model size. It also explores applications in image-guided surgery, motion tracking, and tumor diagnosis. Finally, the document addresses future research directions, including the further development of transformers.

Background: This study was conducted to investigate medical students' lifestyle habits, including sleep quality, eating and drinking pattern, physical activity, and social status. Method: This research project is part two of a multi-institutional cross-sectional observational study conducted among medical students from six medical colleges in Saudi Arabia between September and December 2019. Results: 675 medical students were enrolled electively into the lifestyle study. About half of this number were male students, and the majority aged 18-24 years. Most students (87.6%) slept between 4-8 hours a day, and over 44% were dissatisfied with their sleep. Only 28.1% had three meals a day; about 40% of them usually or always skipped breakfast. While 44% usually or always eat fast food, 44.7% drink 2 liters of water per day. Moreover, male students were significantly consuming fast foods than females, p<0.001. The majority (63.3%) revealed they usually or always drink black coffee daily. Females were significantly more inclined to regular coffee consumption than males, p<0.001. Only 4.3% exercising for 30 minutes or more daily. The majority (65%) of the students were introverted; they had few close friends. Yet, 81% were somewhat satisfied or satisfied with their social life. Male students were predicted to be significantly more satisfied with their social life than females, p=0.001. Only 4.6% smoked cigarettes daily. Whereas 7.1% smoke e-cigarette daily. In contrast, only 0.3% use shisha (hookah) daily. Male medical students were substantially more predicted to be inclined to e-cigarette use than females (p <0.001. The top five leisure activities of a medical student are surfing social media (75.9%), watching movies (61.3%), hanging out with friends (58.1%), spent time with their family (55.4%), and browsing the internet (53.6%). Female medical students were significantly more inclined to surfing social media than male medical students, p=0.022; also, watching movies was preferred for females compared to males, p=0.006. Conclusion: This study revealed that the majority of medical students in Saudi Arabia exhibited healthy lifestyles to some extent, and these health-promoting behaviors differed based on gender, especially concerning physical activity and eating patterns. The findings of this study provide relevant information for future actions that will be geared towards effectively decreasing the occurrence of chronic illnesses and improving future doctor’s well-being.

Violence against paramedics is widely recognized as a serious, but underreported, problem. While injurious physical attacks on paramedics are generally reported, non-physical violence is less likely to be documented. Verbal abuse can be very distressing, particularly if the harassment targets personal or cultural identities, such as race, ethnicity, gender, or sexual orientation. Leveraging a novel, point-of-event reporting process, our objective was to estimate the prevalence of harassment on identity grounds against paramedics in a single paramedic service in Ontario, Canada, and assess its potentially differential impact on emotional distress. In an analysis of 502 reports filed between February 1, 2021, through February 28, 2022, two paramedic-supervisors independently coded the free-text narrative descriptions of violent encounters for themes suggestive of sexism, racism, and homophobia. We achieved high interrater agreement across the dimensions (k=0.73-0.83), and after resolving discrepant cases, we found that 1 in 4 violent reports documented abuse on at least one of the identity grounds. In these cases, paramedics were 60% more likely to indicate being emotionally distressed than for other forms of violence. Our findings offer unique insight into the type of vitriol paramedics experience in the course of their work and its potential for psychological harm.

Mistreatment can adversely affect students’ academic performance and mental health. This study aimed to investigate the prevalence of mistreatment and its association with academic motivation among Thai medical students in clinical years. A cross-sectional study was conducted among medical students throughout Thailand using the Composite Questionnaire of Mistreatment and Academic Motivation Scale (AMS). Descriptive statistics, chi-square tests, correlations, and regression analyses were conducted. A p-value &lt; 0.05 was considered statistically significant. The sample included 399 students, with mean age of 23 ± 1.29 years old, and 61.5% were female. A total of 81% of participants experienced mistreatment. Twenty-nine percents of students thought that mistreatment occurred because the maltreaters did not consider mistreatment as inappropriate or serious. Students who experienced mistreatment exhibited lower AMS (B = -9.16, 95% CI: -15.37 to -2.95, p-value = 0.004) than those who did not. Moreover, students who experienced academic mistreatment exhibited a higher amotivation score (B = 1.50, 95% CI: 0.16 to 2.85, p-value = 0.029) than those who did not. The prevalence of mistreatment was unexpectedly high, and it associated with students' motivation to study. Educational institutions should prioritize addressing this issue and developing strategies to provide assistance, including the enhancement of reporting systems.

Smart electronic devices and telemedicine are widely used in humans' daily lives. This provides remote treatment of patients using information and communications technology. New telemedicine technologies, such as the Internet of Medical Things (IoMT), make it easier for medical and computing devices to communicate regularly and effectively. Critical motivations for adapting the IoMT are reduced cost, increased quality of life, and timely medical intervention. IoMT is significant because it enables continuous, real-time patient monitoring during routine everyday activities using a variety of wearables and sensors. With big data, the IoMT technology makes excellent use of Artificial Intelligence (AI) to support disease detection and health condition prediction, alerting patients and healthcare providers. Many research studies have been conducted to explore various aspects of IoMT and its applications in the real world. However, it is challenging to comprehend all the techniques and solutions proposed by the research community. Therefore, this survey sheds light on some crucial aspects of IoMT technologies and explores the potential research gaps and directions the research community could tackle. The survey examines and discusses the characteristics of IoMT standards, protocols, and types. It then delves into the layers of IoMT and distinguishes them into Fog and edge. The studies published under each type were explored, and the limitations of these works were highlighted. The research gaps and directions on IoMT approaches and technologies were also highlighted. With such findings and research directions, further research endeavors could be carried out to address the issues and existing limitations in the IoMT.

The institutionalization of people with intellectual disabilities has been a common international response across cultures and generations that persists to this day. This chapter recounts its inheritance and manifestation in modern service provision. An institutional mind-set persists among clinicians and managers despite policies that emphasise the rights of persons with intellectual disability and anti-discriminatory practice. Alternative provision is rooted in person-centred practice; with a growing body of evidence for the improved quality of life that results from it. A reflective activity encourages readers to examine a recent case when they were associated with an institutional placement and what alternatives might have been sought. Yet alliances with other professionals, self-advocates and family carers will be needed to effect real and lasting changes in our service cultures and even then, the long shadows of institutional care may still persist.

Artificial intelligence (AI) shows great potential in medical diagnosis and drug analysis. Through deep learning technology, AI can automatically extract features from large amounts of complex medical data, significantly improving diagnostic accuracy and drug development efficiency. Especially in drug target discovery and antiviral peptide classification, AI technology can accelerate data processing and prediction, helping researchers identify potential therapeutic molecules more quickly and optimize the drug development process. This study proposes and validates a Deep learn-based model, deep-Avpiden, to improve the classification and discovery efficiency of antiviral peptides (AVPs). By using sequential convolutional networks (TCNs), the model outperforms traditional recurrent neural networks (RNNs) and long short-term memory networks (LSTMs) in capturing long-term dependencies and parallel computing capabilities. In terms of dataset, we used AVPs and non-AVPS samples from multiple databases, totaling 5,414 cleaned and de-weighted peptide sequences for model training after data preprocessing and embedding. The Deep-AVPiden model has been shown to outperform existing advanced classifiers in experiments, and its effectiveness has been verified by accuracy, precision, recall rate, and area under the ROC curve (OC-ROC). In addition, to accommodate computing resource constraints, we propose an optimized version of Deep-AvPIDen (DS), which utilizes Deep separation convolution technology to significantly reduce computing resource consumption. Through the online application platform, researchers can efficiently classify antiviral proteins and discover new AVPs. Future research could further optimize the model's computational efficiency, handle larger data sets, and expand its potential for biomedical problems such as drug combination prediction and new drug discovery.

In Thailand, the topic of medical ethics and laws related to medical professions has been one part of the national competency assessment criteria. The objective of this article was to design legal issues into the medical curriculum and to share experiences of creative legal study. Legal contents were inserted into 10 subjects and taught for year 1 to year 6 medical students. Students were divided into multi-groups or received individual tasks and then, shared their knowledge and idea for solving legal problems. The results showed they could interpret and create novel ideas for legal and ethical reconstruction, including the topic of the principle of laws, criminal laws, civil and commercial laws, public health laws, organ donation/transplantation, end of life decisions, and legal liability for the medical profession. Finally, the creative legal study can be used as a novel approach to support creativity among medical students.

Background: During anatomy (topographic) chair, we prepared an anatomic piece of an older female pelvis (unknown causa mortis). Here, we present an anatomic piece prepared by medical students that helped us to better understand hypertrophic bladder pathophysiology. Methods: A traditional corpse dissection guided by an assistant professor. Results: Corpse dissection enhanced our personal experience during the medical course. It also helped us to better visualize how big a hypertrophic urinary bladder can become as the etiologic cause is not taken care. Conclusions: Despite virtual and 3D anatomy lessons, we believe corpse dissection must remain as a teaching strategy that can help to build a new generation of surgeons as well as honor the History of Medicine.

In this article, two elliptical-ovel-shaped cylindrical dielectric resonator based wideband Graphene inspired reconfigurable metasurface absorber is designed on diffused quartz substrate having a relative permittivity of 3.75 and conductivity 2200Kg/m3 with height of 25μm. This metasurface having gold plated ground in microstrip with 5μm which is essential by calculating skin depth at 2.0THz frequency. Two elliptical ovel shaped patches with Graphene plated having built in potential varies 0-2.5eV and relaxation time 1.0ps at 290oK. By changing the relaxation time of Graphene 0.1ps-0.3ps its resonance frequency also varies i.e., reconfigurable property they provide without adding any active i.e., PIN diode components. The proposed MS is designed having a dimension of 100×100μm2 is designed on a microstrip. This MS works in the range of 1.6-2.38THz having more than 90% absorbance with two transmission zero at 2.1THz and 2.3THz having high Q ˃ 50 which is used to determine the sensitivity where the proposed MS used as a sensor to determine hemoglobin (Blood Glucose level) and urine (Uric acid) by changing their refractive index from 1.34-1.43. Maximum sensitivity achieved at 2000GHz/RIU and average sensitivity for hemoglobin and urine sensing achieved 833.33GHz/RIU, FOM-8.33 and 4277.7733GHz/RIU, FOM-555.55 respectively.

Medical image analysis is an important branch in the field of medicine, which mainly uses image processing and analysis techniques to interpret and diagnose medical image data. Medical image data helps doctors to effectively observe and diagnose patients' body structures, tissues and lesions. Medical image analysis has been an important research area in the medical field, and it is important for disease diagnosis, treatment planning, and condition monitoring. In recent years, the rapid development of deep learning and computer vision technologies has contributed greatly to the automation, multimodal data fusion, real-time application, and accuracy improvement of medical image analysis. In addition, the development of deep learning has given rise to some new research areas in medical image analysis, such as Generative Adversarial Networks (GANs) for synthetic medical images, self-supervised learning for unsupervised feature learning, and neural network interpretability. In this paper, we will introduce some optimisation methods for medical images which are effective in improving the accuracy, efficiency and reliability of medical image analysis.

Wearing masks to protect against communicable diseases is an effective tool used in many countries affected by the COVID-19 pandemic. Antibacterial activity, antibacterial efficiency, microbial purity and breathability properties of medical disposable masks are very important. Ag is most commonly applied to antimicrobial textiles, but several studies are known about Ag nano-particles. In this work three antimicrobial additives were used. One of them Rudolf GmBH's RUCO-BAC AGP with silver chloride (AgCl) active ingredient also has antimicrobial activity. Four compositions of the binders with antimicrobial additives were prepared and applied to one-layer nonwoven PP material using screen printing, knife over roll coating and laminating machine methods. The influence of the binder antimicrobial polymer coating on the breathability and antibacterial activity of the nonwoven PP material was evaluated. Results had showed that the composition of the polyacrylic acid binder Tubicoat Thickener LP had the least effect on their breathability and samples with the RUCO-BAC AGP formulation had showed the best antimicrobial response. Therefore, further studies of the antimicrobial coating composition were performed using the binder Tubicoat Thickener LP and antimicrobial additives of different chemical nature and concentration - RUCO-BAC AGP, BI-OME AM10 and Nano Ag aqueous dispersion. Based on the microbiological and air permeability results of the samples of the one-layer nonwoven material with coating, the samples of two-layers and three-layers of medical mask model were prepared. Microbiological studies have shown that three-layered medical mask model with RUCO-BAC AGP composition in the middle layer, in both sides of the model has antibacterial efficiency against three pathogens (E. Coli, K. Pneumoniae, an S. Aureus). The performance of this medical mask model has been found to meet requirements for type I medical masks according to the EN 14863 standard. Study have shown that the microbial purity of the mask model is CFU/g <3.

Background: The COVID-19 outbreak has accelerated the huge difference between medical care and disease prevention in Chinese medical institutions. This study aimed to investigated the relationship between the symbiotic units, environments, models, and effects of the integration of medical and disease prevention. Methods: This cross-sectional study involved 762 employees of public hospitals in 11 cities in Zhejiang Province by random stratified sampling. We analyzed the influence paths of elements in the mechanism of integration of medical and disease prevention and the mediating effect of symbiotic models among symbiotic units, symbiotic environments, and effects for on this integration. Results: The path coefficient of symbiotic unit on the symbiosis model was 0.46 (p&lt;.001), the path coefficient of symbiotic environment on symbiosis model was 0.52 (p&lt;.001). The path coefficient of the symbiotic unit and environment was 0.91 (p&lt;.001). The symbiotic models exhibited a partial mediation effect between symbiotic units and the effect of this integration. Sobel test = 3.27, β = 0.152, and the mediating effect accounted for 34.6%. Conclusions: It is suggested that Health policy-makers and public hospital managers should provide sufficient symbiotic units, establish collaborative symbiotic models, and improve the effects of integration of medical and disease prevention in public hospitals.

This article presents a new input device for spastic patients and others with similar symptoms. The sensor consists of a disc used to determine positions and can replace standard joysticks in medical devices such as electric-powered wheelchairs. Using a standard joystick while operating a powered wheelchair can result in dangerous situations when spastic movements occur and extremities cramp making them uncontrollable. To avoid this, a disc was developed that can be controlled with any body part. By shifting weight (x- and y-axis) the disc can tilt in any direction creating a proportional output signal and can also be pushed down in the center (z-axis) to open a menu on a screen for example. When spasms occur it is impossible for users to get stuck on the input device because the disc is flat and can be mounted within a control panel. Body parts coming into contact with the disc would merely slide across the disc without triggering unintentional actions. The sensor presented here is also adaptive and can be adjusted to fit a user’s strength and range of motion. This proposal aims to develop an input device that enables spastic patients to operate sensitive systems safely.

Medical image segmentation is a critical step in various healthcare applications, aiding in diagnosis, treatment planning, and disease monitoring. In this study, we investigate the efficacy of a segmentation approach based on the 2D wavelet transform. Leveraging a dataset comprising 10 diverse medical images, we evaluate the performance of our segmentation method using three key metrics: accuracy, precision, and recall. Our findings demonstrate that the proposed approach enhances segmentation accuracy, offering promising results compared to existing methods. By harnessing the multi-resolution feature extraction capabilities of the 2D wavelet transform, our method achieves improved delineation of medical image structures, paving the way for more accurate and efficient healthcare interventions.

Analytical methodologies were developed based on the near infrared spectroscopy (NIR) associated with chemometric tools to predict the content of macronutrients (total carbohydrate, total protein, and total lipids) in medical food. We prepared the samples employed in this study according to a mixture design with percentual variations from 25% to +25% of macronutrients. Partial least squares (PLS) regression models were built with 70 and 30 samples as calibration and validation sets, respectively. We chose the best processing techniques and results based on the parameters of the ASTM 1655 standard. The models were used to determine these macronutrients in marketed enteral nutrition products, of three different batches, that have quality certification. The average errors in the determination of total carbohydrate, total protein, and total lipids were 1.8, 4.3, and 2.3 %, respectively. The percentages of errors found in this study suggest that the developed model may be useful for the quality control laboratory routine.

This review explores the integration of Virtual and Mixed Reality in medical training. The advent of immersive technologies has revolutionized traditional methodologies, offering immersive, interactive, and flexible learning environments. This study aims to assess the impact, efficacy, and potential of Extended Reality (XR) in medical education. Methods included a comprehensive analysis of current Metaverse’s applications in various medical fields, including surgery, diagnostics, and patient care. Results indicate a significant enhancement in learning outcomes, practical skills, and student engagement. Conclusions suggest that Virtual Reality is a valuable tool for medical training, providing realistic simulations and improving both theoretical knowledge and practical skills. The intersection of virtual reality and cognitive neuroscience presents an exciting frontier for understanding the human brain's response to immersive environments. This review explores how VR impacts learning, with a particular focus on the activation and engagement of the prefrontal cortex during immersive experiences. It delves into various studies that highlight the transformative potential of VR in educational settings and therapeutic applications, demonstrating how VR can facilitate deeper and more effective learning experiences. The review will present a dedicated section on the current methodologies used to analyze the brain's response while immersed in a virtual environment.

Despite soccer popularity, comparatively little scientific information is available concerning the assessment of youth players’ physiological characteristics. The use of medical software integrating wearable sensors to provide accurate and objective data is necessary. In the present study, the objective assessment of physical performance of 128 adolescent soccer players at two timepoints (pre-season and end-season) has been performed. Participants completed a comprehensive test battery including stability, countermovement jumps (CMJ), plyometric jumps (PJ), agility, and quick feet tests. A single Inertial Measurement Unit (IMU) sensor provided quantitative data on various performance metrics. Principal Component Analysis (PCA) reduced the dataset to four principal components (PCs) explaining over 80% of the variance: power (PC1), balance (PC2), speed/agility (PC3), and stiffness (PC4). Paired samples t-test between the two timepoints showed no significant differences in the PCs between the two timepoints, indicating that the training program did not significantly alter the assessed physical attributes. However, subtle individual changes may still inform personalized training adjustments. The study highlights the importance of continuous monitoring and individualized training strategies to optimize athlete performance and reduce injury risk.

Due to the extreme complexity of Alzheimer's disease (AD), the aetiology of which is not yet known, nor are there any known effective treatments, mathematical modelling can be very useful. Indeed, mathematical models, if deemed reliable, can be used to test medical hypotheses that could be difficult to verify directly. In this context, it is important to understand how $A\beta$ and $\tau$ proteins, which in abnormal aggregate conformations are hallmarks of the disease, interact and spread. We are particularly interested in this paper in studying the spreading of misfolded $\tau$. To this end, we present four different mathematical models, all on networks on which the protein evolves. The models differ in both the choice of network and diffusion operator. Through comparison with clinical data on $\tau$ concentration, that we carefully obtained with multimodal analysis techniques, we show that some models are more adequate than others to simulate the dynamics of the protein. This type of study may suggest that, when it comes to modelling certain pathologies, the choice of the mathematical setting must be made with great care if comparison with clinical data is considered decisive.

Fractional flow reserve (FFR) is well recognized as a gold standard measure for the estimation of functional coronary stenosis. Technological progressions in image processing have empowered the reconstruction of three-dimensional models of the coronary arteries via both non-invasive imaging modalities, such as Coronary Computed Tomography Angiography (CCTA), and invasive coronary angiography or intravascular imaging. The application of computational fluid dynamics (CFD) techniques to coronary 3D anatomical models allows the virtual evaluation of the hemodynamic significance of a coronary lesion with high diagnostic accuracy in comparison to the invasive FFR using pressure wires. These opportunities providing hemodynamic information based on anatomy have given rise to a new era of functional angiography and coronary imaging. However, further validations are needed to overcome several scientific and computational challenges before these methods are applied in everyday clinical practice. This review aims to present all the data on the studies and methodologies that have been presented for the virtual estimation of FFR, and the diagnostic execution of the virtual tools for the hemodynamic assessment of coronary lesions compared to the invasive FFR.

The objective of the study was to investigate the dynamics of collaborative learning in TBL through students’ reflections and feedback. The study utilized a mixed-methods approach. Quantitative data collection was done via feedback structured questionnaire. Qualitative data were collected from reflections submitted by 107 first-year MBBS students at the end of TBL session. We found five main themes related to students’ engagement with the session i.e. ( 1) conceptual clarity as the foundation, (2) collaborative learning culture, (3) communication skills, (4) informative and useful team discussions and (5) interactive learning for team development. The majority of the respondents (93%) listened to classmates and coordinated with group members in discussion, (77%) were willing to learn from other group members and contributed ideas to them, (79%) came prepared for session, (75%) found learning material assigned to them as appropriate. Respondents had positive perceptions regarding their participation in group work with a strong inclination towards agreement with the statements provided. The study highlights the positive effects of TBL in promoting peer to peer engagement, active engagement, teamwork skills, and knowledge sharing among undergraduate medical students, ultimately contributing to an effective learning experience.

In this paper we report on the use of an in-house developed solid-state hybrid microwave and radiofrequency generator operating at frequencies of 2.45 GHz and/or 480 kHz for cancer ablation in various tissues. The generator has demonstrated increased accuracy due to its custom-designed hardware, which incorporates the latest technologies and algorithms to control the emitted power versus temperature profile of the treated sample. In particular, the hybrid generator incorporates control systems based on impedance or reflected power measurements that allow controlled ablation without causing unwanted carbonisation and without including areas where tissue damage is not desired. Tests performed ex-vivo on chicken breast and bovine liver show that radiofrequency ablation (RFA) is very effective for performing controlled ablations with minimally invasive probes, such as cardiac pathologies, small lesions, tissues with particular composition, while microwave ablation (MWA) is optimal for performing large ablations in highly vascularised tissues, such as liver cancer, where it is necessary to achieve higher temperatures.

Medical laboratories are perhaps the largest measurement industry in the world. The metrology terminology is relevant for effective and efficient communication, particularly where metrology activities are carried out by operators with different metrology skills. WASPaLM and SIPMeL have had some opportunities to propose changes to the documents in preparation to CLSI and ISO in order to harmonise the terminology with the Metrology Vocabulary (VIM). Many proposals have been accepted. Here we summarise some particularly critical points for metrological terms. The main terms discussed are: Measuring, measuring range, examination, pre-examination, post-examination, manufacturer, measuring instrument, quantitative, qualitative, semi-quantitative, processing, easurement error, maximum permissible error of measurement, total error of measurement, monitoring, variability, performance, reliability, influence, interference, selectivity, sensitivity, detection limit, reliability, pomparability, compatibility, control material. Despite all efforts to coordinate terminologies, it is inevitable that overlapping and inconsistent terminologies will continue to be used because documents and policies are produced in different contexts. In some ISO and CLSI documents, phenomena of magnetic attraction towards common words (such as “analysis” and derivatives), without any consideration of the true metrological meaning, are noted. The ISO and CLSI working groups show, alongside moments of openness, phenomena of true self-referential conservatism.

Continuum robots play the role of end-effector in various surgical robots and endoscopic devices. The robots may be categorized as rigid or soft continuum robots (SCRs). While the SCRs have proven advantages such as safety and compliance, more research and development are required to enhance their capability for specific medical scenarios. This research aims at designing a soft robot considering concepts of geometric and kinematic similarities. The chosen application is a semi-invasive medical application known as Transesophageal Echocardiography (TEE), but the methodology can be implemented in other similar applications. Since established rigid carrier construction make use of principles we find as well embodied in vertebral spines, the paragon for soft robot solution can be the phylogenetic precursor of the spine, the Chorda dorsalis. The feasibility of fabrication of a soft endoscopic device derived from that paragon within a robotics laboratory was shown empirically by producing a three-segment pneumatic SCR. The kinematic model was proposed based on the method of transformation matrices, and an algorithm based on a self-organizing map (SOM) was proposed and applied to realize kinematic similarity. The simulation results indicate that the algorithm acting as an open-loop controller forces the soft robot tip to follow the desired path which in this case is the path of the rigid probe. It is concluded that the solution provides a soft robot that can surrogate and succeed the traditional rigid counterpart owing to size, workspace, and kinematics.

Skilled academic/medical writing is critical to research communication. The fundamental sections of a scholarly manuscript are introduction, methods, results and discussion. The introduction of a medical manuscript is aimed at briefing readers on the clinical extent and public health context of the research problem. It must justify the essentialness of the research to the scientific community and reveal any underlying research novelty. Skillfully conceived, designed and performed research protocols that are unskillfully presented can lose scientific credibility and impact. Without research communication skills authors would not be able to display the usefulness of their research for the scientific community. Generally, research communication or medical writing training/skills is underrepresented in curricular systems of medical schools globally. This can challenge publication quality and quantity of early-career authors/researchers. The author presents the academic experience he accumulated through peer review and supervision of vast manuscripts and theses. This article aimed at presenting a comprehensive roadmap for academic writing of the introduction and at identifying its common pitfalls.

The objective of this study was to develop and evaluate artificial intelligence (AI) models for the detection and instance segmentation of vertebrae and spinal metastases in computer tomography (CT) scans. The models were trained on datasets consisting of patients with polytrauma and relatively undamaged spines, as well as patients diagnosed with spinal metastases. Our results indicate that the models achieved high performance in vertebra segmentation, with F-beta scores ranging from 0.88 to 0.96 across all vertebra classes. For spinal metastases, the model attained F-beta scores of 0.68 for lytic type and 0.57 for sclerotic type metastases. Additionally, the models demonstrated the capability to detect isolated metastatic nodes in other bones, highlighting their robustness and potential for broader clinical application. Despite these promising results, the study faced limitations including a relatively small and homogeneous dataset, variability in segmentation mask quality, and the need for real-world clinical validation. Future clinical trials are necessary to evaluate the practical utility and effectiveness of these AI models in improving patient outcomes. Our study emphasizes the potential of AI-assisted detection and segmentation models in enhancing diagnostic accuracy and efficiency in clinical practice.

Keywords: Marine Coasts; Protected Areas; Defense and Conservation; Asbestos Cement Materials; Wastes; Contamination; Human Health Risk; Medical Geology.

Accurate medical image segmentation is paramount for precise diagnosis and treatment in modern healthcare. This research presents a comprehensive study on the efficacy of Particle Swarm Optimization (PSO) combined with Histogram Equalization (HE) preprocessing for medical image segmentation, focusing on Lung CT-Scan and Chest X-ray datasets. Best Cost values reveal the PSO algorithm’s performance, with HE preprocessing demonstrating significant stabilization and enhanced convergence, particularly in complex Lung CT-Scan images. Evaluation metrics, including Accuracy, Precision, Recall, F-Score, Specificity, Dice, and Jaccard, show substantial improvements with HE preprocessing, emphasizing its impact on segmentation accuracy. Comparative analyses against alternative methods, such as Otsu, Watershed, and K-means, confirm the competitiveness of the PSO-HE approach, especially in Chest X-ray images. The study also underscores the positive influence of preprocessing on image clarity and precision. These findings highlight the promise of the PSO-HE approach in advancing the accuracy and reliability of medical image segmentation, paving the way for further research and method integration to enhance this critical healthcare application.

The patient's satisfaction level concerning hospitalization has certain particularities, related to the geographical area, medical/non-medical assistance, the age, incomes, morbidity and mortality of the population. The objective of this study is to emphasize the degree of patients' satisfaction, depending on the specialty of the hospitalization department: surgical, medical, oncological, psychiatry, and to evidence the factors influencing the reliability and accuracy of patients' answers, such as: the patient's health condition upon admission, the duration of the admission, the level of physical pain and the emotional state. Patients and methods: The research was conducted between April and December 2021 on patients hospitalized in two public hospitals from the north-west of Romania, both of them being independent Legal Entities: the Municipal Clinical Hospital of Oradea (MCHO) and the County Clinical Emergency Hospital of Oradea (CCEHO). Results: The lowest score of PSS recorded in these two analyzed public hospitals from the north-western of Romania was appointed for the Pharmaceutical availability of patients medical treatment (2.24), attitude of the staff (2.56) and the quality of nursing care offered (2.58). Conclusions: The hospital management’s focus has been set to improve the communication skills among medical staff, to evidence their compassion, politeness, and to ensure the availability of essential drugs.

A medical entity (hospital, nursing home, rest home, revalidation center, etc.) usually includes a multitude of information systems that allow for quick decision-making close to the medical sensors. The Internet of Medical Things (IoMT) is an area of IoT that generates a lot of data of different natures (radio, CT scan, medical reports, medical sensor data). However, these systems need to share and exchange medical information in a seamless, timely, and efficient manner with systems that are either located within the same entity or located in other healthcare entities. The lack of inter and intra entity interoperability causes major problems in the analysis of patient records and leads to additional financial costs (e.g., redone examinations). In order to develop a medical data interoperability architecture model that will allow providers and different actors in the medical community to exchange patient summary information with other caregivers and partners in order to improve the quality of care, the level of data security, and the efficiency of care, we take stock of the state of knowledge.

Background: With new challenges to the health system, many new competencies within the scope of teaching public health need to be addressed in medical schools’ curricula such as disaster risk management and health system science. The aims of this study were to identify the needs of public health competencies for medical doctors in Thailand and to assess the level of integration for technical collaboration in teaching public health. Method: A total of 17 out of 21 Thai medical schools participated in the national survey. Qualitative inquiries applied focus group interviews of community representatives from ten sample villages and in-depth interviews of representatives from stakeholder organizations particularly employers. The list of public health competencies framework recommended by WHO-SEARO was applied. Quantitative analysis applied descriptive analysis using STATA 15 and qualitative findings were validated by interrelating the meaning of themes from Word Clouds created in NVivo12. Data integration applied a mixed-method Quan-qual approach. Results: 17 medical schools returned the questionnaires (80.95 % yield). The most common regionally-defined public health competencies (in over 70% of schools) were shown to be: Biostatistics, Community Medicine, Epidemiology, Family Medicine, Medical Ethics and Professional Laws, Preventive Medicine, Health Promotion, Holistic Care, and Research. The curriculum in only one medical school lacked Health Economics, whilst Disaster Management was lacking in two other schools. Discipline-based subjects were found to be more prevalent than interdisciplinary competencies. A variety of methods were being applied for teaching public health. The majority of the schools applied lecture as the main teaching method and multiple-choice questions as the main assessment method. Thai communities expect the doctors to get in touch with the community more often, lead the primary health care team through training the health professionals and community health volunteers, and educate the community for better health. Conclusion: Human resource is the main challenge in addressing interdisciplinary competencies. It is necessary to establish a collaborating mechanism among the big and small medical schools and the faculties of public health to improve the teaching of public health to undergraduate students in medical schools. There is also a need to strengthen the health system science and leadership so that future MDs can lead health service delivery according to the needs of their employers such as the Ministry of Public Health and the Rural Doctors Association. The findings of this study may help to identify a national framework of public health core competencies for medical schools and create a common platform for interdisciplinary collaborations.

After conducting a detailed survey among the villagers of Pallissery and Karukutty, it was observed that in most of the villages the native people have to travel long distances for their basic health needs. Also most of the villagers lack knowledge regarding live health updates. At times, these problems have even resulted in death of many people including pregnant women and children. The objective of our research is to propose an integrated and easy to use Medical Kiosk that can be installed at various locations in rural areas. The Kiosk will provide an integrated environment for all medical related activities and would perform numerous functions like sending notifications regarding medical camps, mobile medical help, important dates for vaccinations, child care, insurance policies and provide other live medical updates to the villagers. It would also support the basic facilities for measurement of body parameters like height, weight, BMI, blood pressure, and heartbeat and also facilitate live consultation facilities with specialized doctors through video and voice chats.

In 2020, students of Pakistan had to adapt to the online environment for the very first time. This study aims to analyze the perceptions of medical, dental, and allied health students about online education in Pakistan. A descriptive, cross-sectional study was done to assess the level of acceptance of undergraduate students. A pre-validated questionnaire regarding demographics, past-experience of e-learning, advantages disadvantages of e-learning, and general perception of students towards e-learning was distributed. Descriptive statistics were computed for demographics, Mann-Witney-U test was used to compare the differences of perceptions between pre-clinical year and clinical years students. Kruskal-Wallis test was applied to compare the results of three specialties of students. Chi-square was used to compare overall category-wise positive and negative responses of students. 1200 students participated in the study. The major advantage identified by all students was the ‘comfortable environment’ in which they studied online. The major disadvantage selected by preclinical year students was ‘anxiety due to social isolation’ and that chosen by clinical year students was ‘lack of patient interaction’. Overall, 72% of students had a negative perception of e-learning. Student-teacher training, student counselling sessions, and innovative techniques need to be introduced to enhance student engagement and reduce pandemic stress.

In this work, an analog front-end (AFE) circuit for Electrocardiogram (ECG) detection system has been designed, implemented, and investigated in an industry-standard Cadence simulation framework using advanced technology node of 45 nm. The AFE consists of an instrumentation amplifier, a Butterworth band-pass filter (with fifth-order low-pass and second-order high-pass sections), and a second-order notch filter- all are based on two-stage, Miller-compensated operational transconductance amplifiers (OTA). The OTAs have been designed employing the $g_m/I_D$ methodology. Both the pre-layout and post-layout simulation were carried out. The layout consumes an area of 0.0058 mm$^2$ without the resistors and capacitors. Analysis of various simulation results were carried out for the proposed AFE. The circuit demonstrates a post-layout bandwidth of 239 Hz with a variable gain between 44 to 58 dB, a notch depth of -56.4 dB at 50.1 Hz, a total harmonic distortion (THD) of -59.65 dB (less than 1\%), an input referred noise spectral density of $

ABSTRACT:This paper presents arguments for why it is important to include disability in the undergraduate medical curriculum. I, the first author am currently involved with my doctoral thesis proposal titled "Proposing clinician competency guidelines for the inclusion of disability in the undergraduate medical curriculum of South Africa. An exploratory study.” As part of my research, I conducted a literature search and developed arguments to strengthen the reasons why the research I propose in my thesis is necessary. It is important that I position myself in this research. I am a South African, Caucasian, female medical doctor, with an interest in physical rehabilitation medicine and I am a person with a physical disability. Although this research study will be conducted in South Africa, I am hopeful that the findings will be transferable to medical schools across the world.

Background: Nanotechnology has emerged as a promising field of study, aiming to revolutionize healthcare through the innovative development of drugs, diagnostic tools, and medical devices. As a result, healthcare professionals in training are constantly faced with the challenge of understanding and applying these emerging technologies. The objective of this study is to determine the factors to consider for including the teaching of nanotechnological tools in medical specialty postgraduate programs. Methods: A study based on the Nominal Group Technique (NGT) was conducted to identify the factors that promote and hinder the implementation of nanotechnology in certain postgraduate programs where nanotechnology is employed, such as Internal Medicine, Critical Care Medicine, Family Medicine, and Clinical Pharmacology at the School of Medicine of Universidad de La Sabana. A framework analysis was used to analyze the collected data. Results: Based on the two research questions, several aspects were identified for the inclusion of nanotechnology in the medical practice of specialties. Key challenges include lack of knowledge and resource availability, misinformation, and lack of knowledge, as well as paradigmatic analysis as the main obstacles to the use of nanotechnology. Conclusions: The findings provide a first-time study on nanotechnology curricula within medical specialty programs in Colombia, with potential extrapolation to similar situations in other medical schools.

The Internet of Medical Things (IoMT) represents a specialized domain within the Internet of Things, focusing on medical devices that require regulatory approval to ensure patient safety. Trusted composition of IoMT systems aims to ensure high assurance of the entire composed system, despite potential variability in the assurance levels of individual components. Achieving this trustworthiness in IoMT systems, especially when using less-assured, commercial, off-the-shelf networks like Ethernet and WiFi, presents a significant challenge. To address this challenge, this paper advocates a systematic approach that leverages the Architecture Analysis & Design Language (AADL) along with Behavior Language for Embedded Systems with Software (BLESS) specification and behavior. This approach aims to provide high assurance on critical components through formal verification, while using less-assured components in a manner that maintains overall system determinism and reliability. A clinical case study involving an automated opioid infusion monitoring IoMT system is presented to illustrate the application of the proposed approach. Through this case study, the effectiveness of the systemic approach in achieving trusted composition of heterogeneous medical devices over less-assured networks is demonstrated.

The Medi-test system we developed was motivated by the large number of resources available for the medical domain, as well as the number of tests needed in this field (during and after the medical school) for evaluation, promotion, certification, etc. Generating questions to support learning and user interactivity has been an interesting and dynamic topic in NLP since the availability of e-book curricula and e-learning platforms. Current e-learning platforms offer increased support for student evaluation, with an emphasis in exploiting automation in both test generation and evaluation. In this context, our system is able to evaluate a student’s academic performance for the medical domain. Using as input medical reference texts and supported by a specially designed medical ontology, Medi-test generates different types of questionnaires for Romanian language. The evaluation includes 4 types of questions (multiple-choice, fill in the blanks, true/false and match), can have customizable length and difficulty and can be automatically graded. A recent extension of our system also allows for the generation of tests which include images. We evaluated our system with a local testing team, but also with a set of medicine students, and user satisfaction questionnaires showed that the system can be used to enhance learning.

Objectives: To determine the effects of caffeine consumption on the sleep habits and lifestyle of medical students. Methods: A cross-sectional study was conducted at Jinnah Sindh Medical University (JSMU) and Hamdard College of Medicine. On 422 undergraduate students aged 18-25 years, through random sampling. The duration of the study was from January 2019 to June 2019. The data was collected through self-administered questionnaire which included data regarding sleep habits and lifestyle of medical students. Results: Majority (81.6%) of the students consumed caffeine while only (18.4%) did not. One third of the participants (31.8%) reported caffeine consumption increased their academic performance and (57.3%) reported that it does not. More than half of the participants (63.3%) who consumed caffeine slept during class, whereas (47.2%) never had difficulty in falling asleep during the night. Conclusion: This research concluded that caffeine does have some role on sleep habits of medical students as they tend to have less sleep hours, experience day time dysfunction, average quality of sleep, and falling asleep during class. It has been concluded that caffeine has no effect on eating habits of medical students however, it does increase the screening time, keeping them active.

The COVID19 pandemic had a major impact on emergency medical communication centres (EMCC). A live video facility was made available to second-line physicians in an EMCC with a first-line paramedic to receive emergency calls. The objective of this study was to measure the contribution of live video to remote medical triage. The single-centre retrospective study included all telephone assessments of patients with suspected COVID19 symptoms from 01.04.2020 to 30.04.2021 in Geneva, Switzerland. The organisation of the EMCC and the characteristics of patients who called the two emergency lines (official emergency number and COVID19 number) with suspected COVID19 symptoms were described. A prospective web-based survey of physicians was conducted during the same period to measure the indications, limitations and impact of live video on their decisions. 8,957 patients were included. 2,157 (48.0%) of the 4,493 patients assessed on the official emergency number had dyspnoea. 4,045 (90.6%) of 4,464 patients assessed on the COVID19 number had flu-like symptoms. 1,798 (20.1%) patients were reassessed remotely by a physician, including 405 (22.5%) with live video, successfully in 315 (77.8%) attempts. The web-based survey (107 forms) showed that physicians used live video to assess mainly the breathing (81.3%) and general condition (78.5%) of patients. They felt that their decision was modified in 75.7% (n=81) of cases, and caught 7 (7.7%) patients in life-threatening emergency. Medical triage decisions for suspected COVID19 patients are strongly influenced by the use of live video.