In this paper, two double Jordan-type inequalities are introduced based on the papers [1]-[5]. These inequalities generalize the inequalities obtained in [1]-[5]. As a result, some new upper and lower bounds of the sinc function are obtained. This extension of Jordan’s inequality is enabled by considering the corresponding inequalities through the concept of stratified families of functions elaborated in [6]. Based on this approach, some optimal approximations of the sinc function are derived by determining corresponding minimax approximants, also described in the paper [6].

Monsoon winds drive upwelling along the eastern coast of India during the south-west (SW) monsoons. These winds also provide alongshore windstress (AWS) resulting in positive cross-shore Ekman transport (ET) from March to the end of September. While instances of high ET and sea surface temperature based upwelling index (UI_SST) were observed along two parts of the coast: between Kashinagara and Kakinada in the north, and between Kavali and Point Calimere in the south. The UI_SST illustrated a much poorer agreement with local ET in the northern section, where the onset of UI_SST preceded the rise of ET and the subsidence of UI_SST signals occurred during a period of rising ET. Additionally, negative sea surface height anomalies (SSHAs), typically associated with coastal upwelling, were also missing through most of the upwelling period. A complex empirical orthogonal function (CEOF) analysis revealed two coherent modes of SSHA variation. The first mode showed a SSHA signature spatio-temporally coincident with the first upwelling and downwelling Kelvin waves closely associated with the equatorial zonal winds that drive them. The second CEOF mode, with a coastal SSHA pattern similar to the SSHA signatures of coastal upwelling, was associated with local offshore ET along the Indian east coast. The CEOF analysis exhibited the triggering of coastal upwelling in April and its suppression from June by coastally trapped Kelvin waves along the northeastern coast of India, while local AWS driven ET was the primary driver of coastal upwelling along the southeastern coast. The second CEOF mode also exhibited a coherent negative coastal SSHA signature excited by local AWS driven ET during the upwelling period. This study examined the spatio-temporal variability of premonsoon and SW monsoon coastal upwelling along the western Bay of Bengal and its relation to remotely forced coastal Kelvin waves.

Groundwater models serve as support tools to among others: assess water resources, evaluate management strategies, design remediation systems and optimize monitoring networks. Thus, the assimilation of information from observations into models is crucial to improve forecasts and reduce uncertainty of their results. As more information is collected routinely due to the use of automatic sensors, data loggers and real time transmission systems; groundwater modelers are becoming increasingly aware of the importance of using sophisticated tools to perform model calibration in combination with sensitivity and uncertainty analysis. Despite their usefulness, available approaches to perform this kind of analyses still present some challenges such as non-unique solution for the parameter estimation problem, high computational burden and a need of a deep understanding of the theoretical basis for the correct interpretation and use of their results, in particular the ones related to uncertainty analysis. We present a brief derivation of the main equations that serve as basis for this kind of analysis. We demonstrate how to use them to estimate parameters, assess the sensitivity and quantify the uncertainty of the model results using an example inspired by a real world setting. We analyze some of the main pitfalls that can occur when performing such kind of analyses and comment on practical approaches to overcome them. We also demonstrate that including groundwater flow estimations, although helpful in constraining the solution of the inverse problem as shown previously, may be difficult to apply in practice and, in some cases, may not provide enough information to significantly constrain the set of potential solutions.

We previously showed that, based on the frequency and distribution of specific cell types, rainbow trout (RT) intestinal mucosa is divided in two regions that form a complex nonlinear 3D pattern and have a different renewal rate. This work had two aims. First, to investigate whether the unusual distribution of cell populations reflects a similar distribution of functional activities. To this end, we determined the protein expression pattern of three well defined enterocytes functional markers: Peptide Transporter 1 (PepT1), Sodium-Glucose/Galactose Transporter 1 (SGLT-1) and fatty acid-binding protein 2 (Fabp2). Second, to characterize the structure of RT intestinal stem cells (ISC) niche and to determine whether the different proliferative rates correlate with a different organization and/or extension of the stem cells population. We studied the expression and localization of well-characterized mammal ISC markers: LGR5, HOPX, SOX9, NOTCH1, DLL1 and WNT3A. Our results indicate that morphological similarity is associated with similar function only between the first portion of the mid-intestine and the apical part of the complex folds in the second portion. Mammal ISC markers are all expressed in RT but their localization is completely different suggesting also substantial functional differences. Finally, higher renewal rates are supported by a more abundant ISC population.

The research is devoted to the problem of noise generation during flights of supersonic civil aircrafts. The effect of a thermally stratified energy source used to control the flow past a pointed cylinder aerodynamic models on the nearfield and ground pressure signatures, as well as on the perceived loudness in decibels (PLdB) on the ground is evaluated. The fields of parameters and the dynamics of the drag forces are studied for different values of temperature in the layers of the thermally stratified energy source and for different number of layers in it. It has been shown that when performing the flow control at freestream Mach numbers 1.5-2 using thermally stratified energy sources with the number of layers from 2.5 to 7.5 and rarefaction parameters in the layers from 0.15 to 0.3, no additional noise impact on the ground is introduced. Thus, the simulations showed that changing the surface pressure signature due to drag reduction does not necessarily imply a change in the PLdB on the ground.

The purpose of this paper is to analyze how Green Business Models (BMs) established by small and medium enterprises (SMEs) can incorporate product and process decarbonization in their components (value proposition, creation and capture) and to what extent this incorporation is affected by SME size. We use a database comprising 1,161 observations of SMEs, 466 in 2014 and 695 in 2016. The results show that SMEs’ value propositions give an intermediate valuation to both legally required and voluntary reduction of environmental impact, irrespective of SME size and the year analyzed. Regarding value creation, SMEs adopt practically no environmental practices, and there are significant differences according to size, with more difficulties than advantages stemming from small size. The study also shows that such environmental practices are not effective in reducing carbon. This diagnosis indicates that SMEs need help from the administration if they are to play a key role in the process of transformation toward a low-carbon economy. Legislative actions involving harsher environmental protection measures might help shape value propositions that place greater importance on reducing environmental impact, whereas training actions on available environmental techniques, promotion of research on how to adapt such techniques to SMEs and the development of specific practices for SMEs might enhance environmental value creation and capture in their BMs.

The paper deals with two new properties of the linear time-optimal control problems with real non-positive eigenvalues of the system. They are the foundation of a new method of synthesizing the time-optimal control without the need to describe the switching hyper-surfaces. The so called “axes initialization” and the synthesis technique are illustrated on the already classical example of the time-optimal control of a double integrator.

From 2020 to 2023 many people around the world were forced to wear masks for large proportions of the day based on mandates and laws. We aimed to study the potential of face masks for the content and release of inanimate toxins. A scoping review of 1003 studies was performed (database search in PubMed/MEDLINE, qualitative and quantitative evaluation). Twenty-four studies were included (experimental time 17 min to 15 days) evaluating content and/or release in 631 masks (273 surgical, 228 textile and 130 N95 masks). Most studies (63%) showed alarming results with high micro- and nanoplastics (MPs and NPs) release and exceedances could also be evidenced for volatile organic compounds (VOCs), xylene, acrolein, per-/polyfluoroalkyl substances (PFAS), phthalates (including di(2-ethylhexyl)-phthalate, DEHP) and for Pb, Cd, Co, Cu, Sb and TiO₂. Of course, masks filter bacteria, dirt and plastic particles and fibers from the air we breathe and have specific indications, but according to our data they also carry risks. Depending on the application, a risk-benefit analysis is necessary. However, mask mandates during the SARS-CoV-2 pandemic have been generating an additional source of potentially harmful exposition to toxins at population level with almost zero distance to the airways.

In this paper it will be considered three deterministic models for the study of the interaction between the human immune system and a virus: the logistic model, the Gompertz model, and the generalized logistic model (or Richards model). A qualitative analysis of this models based on dynamical systems theory will be performed, by studying the local behavior of the equilibria and obtaining local dynamics properties from the linear stability point of view. Also, we will compare this models in order to understanding which is more appropriate to models the interaction between the human immune system and a virus. It will be obtained some natural medical interpretations which are available for all three models and can be useful to the medical community.

On the primitive Earth, both L- and D-amino acids would have been present. However, only L-amino acids are essential blocks to construct proteins in modern life. To study the relative stability of D-amino acid substituted peptides, a variety of computational methods were applied. Ten prebiotic amino acids (Gly, Ala, Asp, Glu, Ile, Leu, Pro, Ser, Thr, and Val) were previously determined by multiple meteorite, spark discharge, and hydrothermal vent studies. Some previously reported early Earth polypeptide analogs were focused on in this study. Tripeptides composed of only Asp, Ser, and Val exemplified that different positions (i.e., N-terminus, C-terminus, and middle) made a difference in the minimal folding energy of peptides, while the chemical classification of amino acid (hydrophobic, acidic, or hydroxylic) did not show a significant difference. Hierarchical cluster analysis for dipeptides with all possible combinations of the proposed ten prebiotic amino acids and their D-amino acid substituted derivatives generated five clusters. Primordial simple polypeptides were modeled to test the significance of molecular fluctuations, secondary structure occupancies, and folding energy differences based on these clusters. We found peptides with α-helices, long β-sheets, and long loops are usually less sensitive to D-amino acid replacements in comparison to short β-sheets. Intriguingly, amongst 129 D-amino acid residues, mutation sensitivity profiles presented that the ratio of more to less stable residues was about 1. In conclusion, some combinations of a mixture of L- and D-amino acids can potentially act as essential building blocks of life.

In this review, we covered the recent advances in synthesis of gold nanoparticles and their uses in degradation of dyes. This study provides framework to develop a low cost, ecofriendly and highly efficient synthesis of gold nanoparticles. These synthetic methods do not produce any toxic byproduct. The present study is focus on removal of dyes by Au-NPs because gold nanoparticles act as good absorbent for dyes in short time. Synthesis of Au-NPs from plant extract e.g. marine alga, Scutellarin Barbata, A.nigra, Fruit peels, Bacillus marisflavi from raw silk cocoons, amylopectin and poly acrylic acid, L.asparagine, Grephene oxide, IPEI coated Au-NPs. The synthesizes Au-NPs were used further for removal of dyes like methylene blue (MB), Rhodamine B (RB) Degradation, methylene orange, acid red degradation, Congo red.

This work focused on demonstrating the use of dynamic time warping (DTW) as metric for the elementary effects computation in Morris-based global sensitivity analysis (GSA) of model parameters in multivariate dynamical systems. One of the challenges of GSA on multivariate time-dependent dynamics is the modeling of parameter perturbation effects propagated to all model outputs while capturing time-dependent patterns. The study establishes and demonstrates the use of DTW as metric of elementary effects across the time domain and the multivariate output domain, which are all aggregated together via the DTW cost function into a single metric value. Unlike the commonly studied coefficient-based functional approximation, and covariance decomposition methods, this new DTW-based Morris GSA algorithm implements curve alignment via dynamic programing for cost computation in every parameter perturbation trajectory, which captures the essence of “elementary effect” in the original Morris formulation. This new algorithm eliminates approximations and assumptions about the model outputs while achieving the objective of capturing perturbations across time and the array of model outputs. The technique was demonstrated using ordinary differential equation (ODE) system of a mixed-order adsorption kinetics, Monod-type microbial kinetics, and the Lorenz attractor for chaotic solutions. DTW as Morris-based GSA metric enables the modeling of parameter sensitivity effects on the entire array of model output variables evolving in time domain resulting to parameter rankings attributed to the entire model dynamics.

Software stands as one of the most rapidly evolving technologies in the present era, characterized by its swift expansion in both scale and complexity which leads to challenges in quality assurance. Software Defect Prediction (SDP) emerges as a methodology crafted to anticipate undiscovered defects, leveraging known defect data from existing codes. This methodology serves to facilitate software quality management, thereby ensuring overall product quality. Machine Learning (ML) and Deep Learning (DL) methodologies exhibit superior accuracy and adaptability compared to traditional statistical approaches catalyzing active researches in this domain. However, it makes us hard to generalize not only because of the disparity between open-source project and commercial project but also the difference on each industrial sectors. Consequently, further research utilizing datasets sourced from diverse real-world sectors becomes imperative to bolster the applicability of these findings. In this study, we utilized embedded software for telecommunication systems of SAMSUNG ELECTRONICS, supplemented by the introduction of nine novel features to train the model, and subsequent analysis of results ensued. Experimental outcomes revealed that the F-measurement metric has been enhanced from 0.58 to 0.63 upon integration of the new features, thereby signifying a performance augmentation of 8.62%. This case study is anticipated to contribute to bolster the application of SDP methodologies within analogous industrial sectors.

In this work, electrochemical deposition (galvanostatic and potentiostatic) techniques were used to obtain of new composite polymer: 3-methylpyrrole - sodium dodecyl sulfate/poly 2-methythiophene (P3MPY-SDS/P2MT) coatings on cobalt -based alloy sample for anticorrosion protection. The sodium dodecyl sulfate as a dopant ion used in electropolymerization practice can have a relevant effect at the anticorrosion protection of the composite polymer layer by blocking the entry of aggressive ions. The cobalt -based alloy substrate had an important influence on the electrochemical performance of the composite coating and this together with the presence of the polymeric layer was achieved by simultaneously formation of a complex oxides film and polymeric layers. The polymeric coatings were analyzed by cyclic voltammetry, Fourier transform infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM) methods. The corrosion protection of P3MPY-SDS/P2MT coated cobalt based alloy has been explored by potentiostatic and potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) procedures in1 M HCl medium. The corrosion establishment of P3MPY-SDS/P2MT covered cobalt based alloy was observed to be ~10 times less than that uncoated specimen and the effectiveness of these composite layers of this coating is above than 90%. The superior efficacy is achieved by the electrochemical polymerization of P3MPY-SDS/P2MT obtained at 0.5 mA/cm2 and 1mA/cm2 current densities and at 0.9V and 1.0V potential applied and in molar ratio 5:1. Corrosion tests result indicated that P3MPY-SDS/P2MT coatings provide good corrosion protection of cobalt -based alloy in aggressive environments.

The red palm weevil (Rhynchophorus ferrugineus) inflicts widespread damage in date palm plantations and urban settings, leading to stand loss and safety concerns, intensified by the economic and ecological burdens of synthetic preventive treatments. A novel approach emphasizes detecting weevil-infested palms through sensors and targeting control efforts at colonized trees. The study analyzes two datasets: field manager-reported results from settings with preventive pest control versus seismic sensor-monitored units. Sensor data translates into damage index values, exploring curative treatments, attack likelihood based on infestation history, and the impact of sensor-based management on infestation incidence decline. Findings reveal lower weevil infestation in urban areas and preventive-treated palm settings. A strong correlation exists between sensor indications and grower decisions in date plantations. Palms previously infested are more prone to the damage. Long-term sensor-based management significantly reduces weevil-affected palm numbers. The high infestation in sensor-equipped date palm settings stems from a gap between sensor-identified and preventively treated palms. Controlling weevils based on sensor indications aligns practically with grower curative treatments, preventing significant damage. Weevils target previously infested palms, optimizing pest control through a continuous strategy integrating sensor monitoring with prompt response treatments. This proves highly effective, offering a cost-efficient alternative to preventive treatment reliance.

A series of polyacrylonitrile (PAN)-based block copolymers with poly(methyl methacrylate) (PMMA) as sacrificial bock were synthesized by atom transfer radical polymerization and used as precursors for the synthesis of porous carbons. The carbons enriched with O- and S-containing groups, introduced by controlled oxidation and sulphuration, respectively, were characterized by Raman spectroscopy, scanning electron microscopy, and X-ray photoelectron spectrometry, and their surface textural properties were measured by a volumetric analyzer. We observed that the presence of sulphur tends to modify the structure of the carbons, from microporous to mesoporous, while the use of copolymers with a range of molar composition PAN/PMMA between 10/90 to 47/53 allows the obtainment of carbons with different degrees of porosity. The amount of sacrificial block only affects the morphology of carbons stabilized in oxygen, inducing their nanostructuration, but has not effect on their chemical composition. We also demonstrated their suitability for separating a typical N2/CO2 post-combustion stream.

We have developed a simple, rapid, high-throughput RBD-based ELISA to assess the humoral immunity against emerging SARS-CoV-2 virus variants. The cDNAs of the his-tagged RBD proteins of the virus variants were stably engineered into HEK cells secreting the protein into the supernatant, and RBD purification was performed by Ni-chromatography and buffer exchange by membrane filtration. The simplified assay uses single dilutions of sera from finger-pricked native blood samples, purified RBD in 96-well plates, and a chromogenic dye for development. The results of this RBD-ELISA were confirmed to correlate with those of a commercial immunoassay measuring antibodies against the Wuhan strain, as well as direct virus neutralization assays assessing the cellular effects of the Wuhan and the Omicron (BA.5) variants. Here we document the applicability of this ELISA to assess the variant-specific humoral immunity in vaccinated and convalescent patients, as well as to follow the time course of selective vaccination response. This simple and rapid assay, easily modified to detect humoral immunity against emerging SARS-CoV-2 virus variants, may help to assess the level of antiviral protection after vaccination or infection.

Pasture-based production systems are predominant in major beef-producing countries, however, these systems lack validated protocols to assess animal welfare under commercial conditions. The objective of this study was to validate an animal welfare protocol for fattening Zebu cattle farms in tropical pasture systems. The initial protocol was developed with the participation of producers, professionals, the general public, and the Colombian health authority, through workshops with a participatory approach and collaborative knowledge management. The validation was carried out in 24 pasture-based commercial Zebu cattle farms in the middle Magdalena region of Colombia. Visits were made with an average duration of 2.5 hours, which included the evaluation of 788 fattening cattle. The protocol evaluated animal-based, resource-based, and livestock management indicators through a questionnaire-guided interview to evaluate cattle handling and health, animal-based measurements, and documentation management. A protocol validation process was carried out by selecting indicators that remained unchanged, adjusting those that were feasible to implement, and eliminating inadequate or unnecessary indicators. The application of the protocol demonstrated that there are valid and feasible measures to include in the evaluation protocols of pasture-based fattening systems. Likewise, the active participation of producers is crucial to achieving a greater commitment to the implementation of this protocol.

Visual Patient Avatar ICU is an innovative approach to patient monitoring enhancing the user's situation awareness in intensive care settings. It dynamically displays the patient's current vital signs through changes in color, shape and animation. The technology can also indicate patient-inserted devices, such as arterial lines, central lines and urinary catheters, along with their insertion locations. We conducted an international, multi-center study using a sequential qualitative-quantitative design to evaluate users' perception of Visual Patient Avatar ICU among physicians and nurses. Twenty-five nurses and twenty-five physicians from the ICU participated in the structured interviews. Forty of them completed the online survey. Overall, ICU professionals expressed a positive outlook on Visual Patient Avatar ICU. They described Visual Patient Avatar ICU as a simple and intuitive tool that improved information retention and facilitated problem identification. However, a subset of participants expressed concerns about potential information overload and a sense of incompleteness due to missing exact numerical values. These findings provide valuable insights into user perceptions of Visual Patient Avatar ICU and encourage further technology development before clinical implementation.

The supply of feed has a significant effect on fish growth and operation costs, making it a critical factor in aquaculture. Owing to the repetitive nature of feed supply, feeding techniques have undergone a shift from manual feeding to systems allowing operators to set feed quantities and timing, reducing labor efforts. However, unlike manual feeding, automatic systems cannot ad-just the amount of feed supplied according to the feeding activities of fish, potentially resulting in overfeeding or underfeeding. Such overfeeding causes marine pollution and increases operational costs, whereas underfeeding hinders fish growth. In this paper, we present an intelligent feeding system that observes the depth-specific feeding behavior of red seabream during the feeding process and determines whether feed supply must be continued. The performance of the feeding algorithm is evaluated by comparing the feed loss rate measured during a feeding experiment at a red seabream sea cage farm with that of the traditional manual feeding method. The results reveal that the feed supply per unit time of the manual method and the developed intelligent feed supply system is at an equivalent level. Moreover, the difference in the average feed loss rate is a negligible 1.16%, confirming that the new system is slightly more advantageous.

The paper explores the potential of a low-cost advanced video-based technique for the assessment of structural damage induced to buildings by seismic loading. A low-cost high-speed video camera was utilized for motion magnification (MM) processing of footages of a two-story reinforced concrete frame building subjected to shaking table tests. The damage after seismic loading was estimated by analyzing the dynamic behavior (i.e. in terms of modal parameters) and the structural deformations of the building in the MM videos. The results by MM were compared for method validation to damage assessment obtained by the analyses of conventional accelerometers and high-precision optical markers tracked by a passive 3D motion capture system. Also, 3D laser scanning to obtain an accurate survey of the building geometry before and after the seismic tests was carried out. In particular, accelerometers were also processed and analyzed by using several stationary and non-stationary techniques with the aim to analyze the linear behavior of the undamaged structure and the nonlinear structural behavior during damaging shaking table tests. The proposed MM-based procedure provided accurate estimate of the main modal frequency and the damage location through the analysis of modal shapes, which were confirmed by advanced analyses of accelerometric data.

The quantification of sea surface temperature (SST) through space platforms has revolutionized how we obtain information at a global level. However, the main disadvantage of obtaining SST with satellite images consists of its inherent coarse spatial resolution. One solution could be the use of downscaling algorithms to create sequences of matrices at a higher resolution. We used the same SST data source from the MODIS-Aqua sensor at three spatial resolutions of 9 km, 4.5 km, and 1 km in the Gulf of California. Based on an open-source algorithm, the original SST images were downscaled to 4.5 km, 1 km, 500 m, 250 m, and 125 m per pixel scales. Results indicate a strong linear relationship between the original SST-MODIS data and the modeled data for all spatial resolutions. This study demonstrates the feasibility of an open-source downscaling algorithm to enhance the spatial resolution of SST images in a marginal sea.

An abdominal aortic aneurysm (AAA) is usually asymptomatic until rupture, which is associated with extremely high mortality. Consequently, early detection of AAAs is of paramount importance in reducing mortality; however, most AAAs are detected by medical imaging incidentally. The aim of this study was to investigate the feasibility of machine learning-based pulse wave (PW) analysis for the early detection of AAAs using a database of in silico PWs. PWs in the large systemic arteries were simulated using one-dimensional blood flow modelling. A database of in silico PWs representative of subjects (aged 55, 65 and 75 years) with different AAA sizes was created by varying the AAA-related parameters with major impacts on PWs – identified by parameter sensitivity analysis – in an existing database of in silico PWs representative of subjects without AAA. Then, a machine learning architecture for early detection of AAAs was proposed, which was trained and tested using the new in silico PW database. The parameter sensitivity analysis revealed that the AAA maximum diameter and stiffness of the large systemic arteries were the dominant AAA-related biophysical properties that significantly influence the PW. The simulated PW indexes extracted from the database showed that the PW was not only influenced by the presence of an AAA but was also significantly affected by multiple cardiovascular parameters that compromised the detection of AAAs by using individual PW indexes. Alternatively, the trained machine learning model performed well in classifying normal and AAA conditions using digital photoplethysmogram PWs from the database. These findings suggest that machine learning-based PW analysis is a promising approach for AAA screening using PW signals acquired by wearable devices.

The genome of Vibrio cholerae contains three structural genes for the NhaP-type cation-proton antiporter paralogues, Vc-NhaP1, 2 and 3 mediating exchange of K+ and or Na+ for protons across the membrane. Based on phenotype analysis of chromosomal Vc-NhaP1, 2 and 3 triple deletion mutants we suggested that Vc-NhaP paralogues might play a role in the Acid Tolerance Response (ATR) of V. cholerae as it passes through the gastric acid barrier of the stomach. Comparison of the biochemical properties of Vc-NhaP isoforms revealed that Vc-NhaP2 is the most active among all three paralogues. Therefore, Vc-NhaP2 antiporter is a plausible therapeutic target for developing novel inhibitors targeting these ion exchangers. Our structural and mutational analysis of Vc-NhaP2 identified a putative cation binding pocket formed by antiparallel extended regions of two transmembrane segments (TMSs V/XII) along with TMS VI. Molecular Dynamics (MD) simulations suggested that the flexibility of TMS-V/XII is crucial for the intra-molecular conformational events in Vc-NhaP2. In this study, we developed some putative Vc-NhaP2 inhibitors from Amiloride analogs (AAs). Amiloride is a potent inhibitor of human Na+/H+ exchanger-1 (NHE1). Based on the pharmacokinetic properties and potential binding affinity scores we chose six AAs showing high binding affinity scores to Vc-NhaP2. In silico, the six AAs interacted with the functionally important amino acid residues located in TMSs III, IV, V, VI, VIIII and IX either from the cytoplasmic side (three AAs) or the periplasmic side (three AAs) of Vc-NhaP2. Four AAs were modified to reduce their toxicity profile compared to the original AAs. Molecular docking of the modified AAs revealed promising binding. The four selected drugs interacted with functionally important amino acid residues located on the cytoplasmic side of TMS VI, the extended chain region of TMS V and TMS XII and the loop region between TMSs VIIII and IX. Molecular dynamics simulations revealed that binding of the selected drugs destabilized the Vc-NhaP2 and altered the flexibility of functionally important TMS VI.

This study was conducted to develop a PID control algorithm considering viscosity for the planting depth control system of a rice transplanter using various hydraulic oils at different temperatures and to evaluate the performance of the control algorithm, and compare the performance of the PID control algorithm without considering viscosity and considering viscosity. In this study, the simulation model of the planting depth control system and a PID control algorithm were developed based on the power flow of the rice transplanter (ERP60DS). The primary PID coefficients were determined using the Ziegler–Nichols (Z–N) second method. Routh’s stability criteria were applied to optimize the coefficients. The pole and double zero points of the PID controller were also applied to minimize the sustained oscillations of the responses. The performance of the PID control algorithm was evaluated for three ISO (The International Organization for Standardization) standard viscosity grade (VG) hydraulic oils (VG 32, 46, and 68). The results show that the control algorithm considering viscosity is able to control the pressure of the proportional valve, which is associated with the actuator displacement for various types of hydraulic oils. It was noticed that the maximum pressure was 15.405 bars at 0, 20, 40, 60, 80, and 100 ℃ for all of the hydraulic oils. The settling time and steady-state errors were 0.45 s at 100 ℃ for VG 32, and 0% for all of the conditions. The maximum overshoots were found to be 17.50% at 100 ℃ for VG 32. On the other hand, the PID control algorithm without considering viscosity could not control the planting depth, because the response was slow and did not satisfy the boundary conditions. The PID control algorithm considering viscosity could sufficiently compensate for the nonlinearity of the hydraulic system and was able to perform for any of temperature-dependent viscosity of the hydraulic oils. In addition, the rice transplanter requires a faster response for accurately controlling and maintaining the planting depth. Planting depth is highly associated with actuator displacement. Finally, this control algorithm considering viscosity could be helpful in minimizing the tilting of the seedlings planted using the rice transplanter. Ultimately, it would improve the transplanter performance.

A B S T R A C T Genital herpes disease is caused mainly by herpes simplex virus type 2 (HSV-2), which is sexually transmitted with a high prevalence in both developed and developing countries. No vaccine is currently available against genital herpes. In this study, we introduced and expressed two genes encoding HSV-2 glycoprotein D (gD) and VP16 protein and a GFP marker gene (control) in tobacco seedlings. Positive plant infection was assessed through characteristic tobacco mosaic virus disease symptoms on leaves and by monitoring the fluorescence emitted by the expressed GFP protein. Expression of the HSV-gD2 and VP16 antigens was verified by RT-PCR, ELISA and Western blot. As a proof of concept, the immunogenicity and the protection ability of the plant produced gD antigen was tested in a mouse model of genital herpes and compared to gD antigen produced in a mammalian expression system. This showed that the plant-gD preparation, when used in combination with a CpG oligodeoxynucleotide as adjuvant, was highly immunogenic and capable of inducing complete immunity to lethal vaginal HSV-2 challenge in mice. Thus, the data presented here may have implications for the development of a production system for highly immunogenic plant-based HSV-2 vaccine antigens.

In vitro studies show that diclofenac inhibits enzymatic steroid glucuronidation. This study was designed to investigate the influence of diclofenac on the excretion of stanozolol and 3'-hydroxystanozolol via analyses in hair, blood and urine in vivo in a rat study. Brown Norway rats were administered with stanozolol (weeks 1-3) and diclofenac (weeks 1-6). Weekly assessment of steroid levels in hair was complemented with spot urine and serum tests. Levels of both stanozolol and 3'-hydroxystanozolol steadily increased in hair during stanozolol treatment and decreased post-treatment, but remained readily detectable for 6 weeks. In contrast, compared to control rats, diclofenac significantly reduced urinary excretion of 3’-hydroxystanozolol which was undetectable in most samples. This is the first report of diclofenac altering steroid metabolism in vivo, detrimentally affecting detection in urine, but not in hair which holds considerable advantages over urinalysis for anti-doping tests.

Case studies (CS) attempt to help students increase critical thinking skills and engagement while working through a real-life scenario in various disciplines, including medicine, law, and business. However, the CS method has not been heavily utilized in biological sciences. The present study investigated the effect of the CS method on undergraduate biology students’ conceptual understanding, academic outcomes, and perspectives. A case study was applied in a one-semester undergraduate biology course, which was compared to ten semesters of standard sections. Participants completed course pre- and post-tests, pre- and post-case tests, and an online survey to assess their conceptual understanding and engagement. The initial lowest quartiles were determined from the individual course pre-test scores, which were lower than class averages. Results suggested that the CS method helped students in learning outcomes, critical thinking, and conceptual understanding toward biology. In post-test learning gains, the CS group did 20% better than the non-CS group, with the largest benefit seen in the initially lowest pre-test quartile of the class. Moreover, post-case learning gains were 55% improved in the case test. Survey results indicated that students had positive attitudes toward CS for their engagement in plant biology content. Overall, the distribution of A grades improved by 2.6-fold from standard to CS groups. We conclude that the use of CS may address course content engagement and have the potential to effectively boost academic performance, especially for the initially lowest quartile in undergraduate plant biological sciences courses.

The nucleation of voids in alpha iron and the influence of carbon were investigated through a combination of rate theory and nucleation theory calculations. The steady rates of void nucleation exhibit high sensitivity to carbon. Even a seemingly negligible carbon concentration, as low as a few atomic parts per million (appm), can dramatically reduce the nucleation rates and narrow the temperature window for nucleation. This study highlights the challenges in certifying and qualifying nuclear materials for use in reactor environments. It emphasizes the necessity for precise control of impurity levels during materials processing and stringent requirements for irradiation testing, which are susceptible to contamination. Furthermore, the study provides an explanation for the significant data scattering observed in void swelling behaviors as reported in the literature.

The hard open problem of finding the lower bound for the Fokker Planck Kolmogorov’s time-dependent controller parameter probability density function is addressed for the first time in literature in this work. This revolutionary exposition will put control theory and other related inter-disciplinary fields to a higher level towards contemporary control theory. Notably, based on the influential role of control theory in both engineering and industry, this paper will be of great value to all engineering and industry professionals who seek to know more about advanced trends within control theory settings. On the other remit of the spectrum, Fokker Planck Kolmogorov(FPK) equations are of high importance to physicists as well as mathematicians, based on their multiple applicability to multi-interdisciplinary fields of human knowledge, and beyond. So, this by default adds more taste and credibility to this study. Concluding thoughts are included at the end of the work along with a difficult outstanding problem and the direction of future work.

The wound management sector has attracted considerable attention due to the increasing challenge posed by antimicrobial resistance (AMR) and the specialized care required for chronic wounds. Effective wound care involves selecting appropriate dressings tailored with antimicrobial agents to prevent bacterial infection. Among various types of wound dressings, fibers and electrospun fibers, with their unique characteristics, have emerged as innovative new materials. However, the rise of AMR necessitates the exploration of new antimicrobial agents for wound dressings, particularly for addressing bacterial pathogens like methicillin-resistant Staphylococcus aureus (MRSA). Endophytic fungi, known for producing diverse bioactive compounds, including novel antibacterial agents, represent a promising source of such new agents. This study tested thirty-two endophytic fungi from thirteen distinct Australian native plants for their antibacterial activity against S. aureus, the most common wound-associated bacteria. Ethyl acetate (EtOAc) extracts from fungal culture filtrates exhibited inhibitory effects against both methicillin-sensitive S. aureus ATCC 25923 and MRSA strains M173525 and M180920. DNA sequence analysis was employed for fungal identification, with EtOAc extracts from the most active sample, EL 19 (Chaetomium globosum), selected for further bactericidal and antibiofilm testing against the chosen bacteria. Biofilm of S. aureus ATCC 25923 was reduced by 55% by EtOAc extracts of EL 19 at 1/2 × MIC. To demonstrate the potential application in wound dressing materials, three different concentrations of the extract were incorporated into Polycaprolactone fiber mats through electrospinning, with resultant inhibition of S. aureus ATCC 25923 being observed. This research underscores the potential of endophytic fungi from Australian plants as sources of substances effective against common wound pathogens. Further exploration of the responsible compounds and their mechanisms could facilitate the development of wound dressings effective against MRSA and innovative biofilm-resistant electrospun fibers, contributing to the global efforts to combat AMR.

Patients with low-grade appendiceal mucinous carcinomas (LAMN) treated with cytoreductive surgery (CRS) and hyperthermic intraperitoneal chemotherapy (HIPEC) have a favorable prognosis. A subgroup presents a clinically aggressive course with disease progress despite any treatment. The purpose of the study is to report the experience with clinically aggressive LAMN patients treated by the same team and review the literature. Four patients with clinically aggressive LAMN were reviewed. Clinical and histopathological characteristics were re-examined. Recurrences and the time of recurrence, as well as the survival time, were recorded. There were 4 men with clinically aggressive LAMN treated with CRS plus HIPEC. One of them underwent CC-0 surgery, two underwent CC-1, and one CC-3 surgery. All received systemic chemotherapy after surgery. Recurrence was recorded in 3 patients in 4-23 months after initial treatment. Two of them underwent secondary CRS. Three patients died of disease recurrence in 13-23 months, and one is alive with disease relapse 49 months after initial surgery. LAMN was identified in both initial specimens and in specimens of reoperation. The prognosis of LAMN patients treated with CRS plus HIPEC is favorable. A small number of them presents clinically aggressive course unresponsive to any treatment. Molecular and genetic studies are required to identify this group of LAMN patients who have an unfavorable prognosis.

The Philippines is both a biodiversity hotspot and a megadiverse country. The country also has experienced one of the highest rates of deforestation in Southeast Asia and is among the first countries to introduce a massive reforestation program to address the country’s rapid biodiversity and forest loss. Drawing upon an empirical study from the Leyte island and other relevant case studies from the Philippines, in this chapter, we demonstrate that recovering secondary forests following shifting cultivation, locally known as kaingin have the high potentials for biodiversity and carbon co-benefits. Based on our empirical study, we also found that secondary forest regrowing after kaingin use can potentially be used as a cost-effective reforestation measure with multiple benefits to people and the environment in upland areas of the Philippines. We also discuss measures that are essential for such programs to be successful.

Important tumor biomarkers, therapeutic targets, and mechanisms of tumorigenesis were discovered in animal models. Mouse models of malignant gliomas were represented by transplantable, chemically-induced, and genetically-engineered cells. The aim of the study was to investigate the morphological, molecular, and immunological characteristics of two original glioblastoma (GB) strains, M2 and M6. These are new, chemically-induced, trans-plantable tissue models of malignant diffuse mouse glioma. Tissues from M2 GB and M6 GB were transplanted into immunocompetent C57BL/6 mice. The clinical manifestations of M2 GB and M6 GB growth in mice include motility disorders, cachexia, and priapism. Morphologically, M2 GB and M6 GB are characterized by diffuse proliferation, cellular and nuclear polymorphism, high mitotic activity, and pathological forms of mitosis due to the aggressive nature of these tumors. Flow cytometry showed that CD3+ T lymphocytes (~32%) and F4/80+ macrophages (~28-50%) highly infiltrated both tumors. M2 GB had higher levels of F4/80+ macrophages than M6 GB. Cdkn2a, S100b, Mki67, Pten, Vegfa, Hif1a, Sox2, Abcb1, and Gfap genes were overexpressed in both tumors. Cd133, Tp53, and Pdgfra expression was increased in M2 GB. High expression of Pi3k and Gdnf was observed in M6 GB. Expression of Cd44, Pi3k, Hif1a, Gdnf and Egfr was higher in the M6 GB tissues com-pared to M2 GB, while Cdkn2a, Tp53, Cd133 and Pdgfra were higher in the M2 GB tissue compared to M6 GB. The transplantable M2 GB and M6 GB tissue models have intratumor immune responses, clinical and morphological features similar to human GB, as well as gene expression patterns that are important for further studies on tumorigenesis. These models can be used to develop diagnostic and therapeutic procedures and study carcino-genesis.

Adipose tissue has acquired considerable importance due to its role in maintaining body homeostasis. Beyond storing energy, adipose tissue is essential in numerous processes of energy metabolism, food intake, endocrine and immunological functions as well as neromodulatory functions by secreting hormones that participate in the regulation of homeostasis and being responsive to soluble proteins secreted by other tissues. An imbalance of these functions will generate structural and functional changes in the adipose tissue, favouring the secretion of deleterious adipocytokines that benefit a pro-inflammatory state, allowing the development of metabolic and cardiovascular diseases. Obesity is a disease that has increased rapidly in recent decades and is caused by environmental, hormonal, and genetic factors, which probably work in combination. Environmental factors that contribute to the increase in obesity include decreased physical activity, associated with increased screen time, increased accessibility and consumption of foods rich in fats and sugars. Weight loss should be recommended for all obese patients and overweight patients with comorbidities. For many patients who need to lose weight for medical reasons, the initial goal is to lose 5-10% of their body weight in the first 6 months. A common theme worldwide has been the development of professional guidelines for the control and treatment of obesity and in Chile, the Chilean Society of Metabolic and Bariatric Surgery led the process of adopting the adult obesity clinical practice guideline, which establishes changes in the approach to managing obesity as a chronic disease, with an emphasis on multifactorial lifestyle interventions that include dietary changes, increased physical activity, and behavioural modifications. Pharmacotherapy, medical devices, and bariatric surgery are other options for patients who need additional interventions, so the objective of this review is to know the pathophysiological mechanisms of obesity from its origin to the current treatments available for treatment.

Background/Objectives: RAS is associated with coronary artery disease (CAD), exacerbation of arterial hypertension and progression to heart failure, but remains frequently unrecognised in clinical practice. Methods: We conducted a systematic review and meta-analysis of studies by pooling data of patients undergoing CAG due to suspected or stable CAD that received a bilateral renal artery angiography; Results: A total of 31 studies with 31,689 patients were included (mean age 63.2±8.7 years, 20.9% were female). Overall, 13.4% (95%CI 10.5-16.7%) of patients undergoing coronary angiography had significant RAS, with 6.5% (95% CI 4.5-8.9%) and 3.7% (95%CI 2.5-5.2%) having severe and bilateral RAS. The mean weighted proportion of patients with 3-vessel coronary disease (3VD) was 25.1 (95%CI 19.6-30.9%) while 4.2% (95%CI 2.6-6.2%) had leftmain (LM) coronary disease. Patients with RAS compared to those without RAS were significantly older (mean difference - MD 4.2 years, (95%CI 3.8-4.6). The relative risk of RAS was greater for the female sex (risk ratio, 95%CI; RR 1.3, 1.03-1.57), presence of diabetes (RR 1.2, 1.10-1.36), arterial hypertension (RR 1.3, 1.21-1.46), dyslipidemia (RR 1.1, 1.06-1.14), peripheral artery disease-PAD (RR 2.1, 1.40-3.16), chronic kidney disease-CKD (RR 2.6, 2.04-3.37), 3VD (RR 1.6, 1.30-1.87), and LM disease (RR 1.8, 1.28-2.47). Smoking had a neutral effect on the risk of RAS occurrence (RR 1.0, 0.94-1.06); Conclusions: RAS is common in patients undergoing coronary angiography. CKD, PAD, older age, and severe CAD were among the strongest predictors for the presence of significant RAS.

This study aimed to identify the utility of diffusion-weighted magnetic resonance (MR) imaging with an apparent diffusion coefficient (ADC) map as a predictor of the intrahepatic response of hepatocellular carcinoma (HCC) to cisplatin-based hepatic arterial infusion chemotherapy (HAIC). We retrospectively evaluated 113 consecutive patients with HCC who underwent gadoxetic acid-enhanced and diffusion-weighted MR imaging. The appropriate cutoff for the tumor-to-liver ADC ratio was determined to be 0.741. Of the 113 patients, 51 (45%) presented with a tumor-to-liver ADC ratio < 0.741. Evaluation of the intrahepatic treatment response after 2-3 cycles of HAIC in these 51 patients revealed that 20 patients (39%) experienced an objective response to HAIC. On the other hand, only 10 of the 62 patients with a tumor-to-liver ADC ratio ≥ 0.741 (16%) experienced an objective response. Thus, the objective response rate was significantly higher in patients with a tumor-to-liver ADC ratio < 0.741 than in those with a tumor-to-liver ADC ratio ≥ 0.741 (P = 0.006). Multivariate logistic regression analysis using parameters including perfusion alteration, percentage of a non-enhancing portion, and tumor-to-liver ADC ratio revealed that a tumor-to-liver ADC ratio < 0.741 (odds ratio 3.03; P = 0.015) is the sole predictor of an objective response to HAIC. Overall survival rates were significantly higher in patients with objective responses to HAIC than in those without objective responses (P = 0.001 by log-rank test). In conclusion, patients with unresectable HCC with a tumor-to-liver ADC ratio < 0.741 showed a favorable intrahepatic response to HAIC. Therefore, diffusion-weighted MR imaging can play a critical role as a predictor of response to cisplatin-based HAIC in unresectable HCC.

Background: To investigate the association between enteral feeding and the risk of pneumonia in critical care adult patients. Methods: An updated literature review of studies discussing between 2016 and 2023. CINAHL, Cochrane, Embase, PubMed, Scopus, and Web of science databases were used to explore studies regarding our subject, the association between enteral feeding and the risk of pneumonia in critical care adults. Results: Enteral nutrition (EN) has been linked to a significant reduction in pneumonia, as well as shorter ICU or hospital stays, and decreased mechanical-ventilation duration in numerous studies. Conversely, pneumonia risk and other infections, as well as the fatality rate, has been found to increase with EN. Early initiation of EN within 48 hours, along with a low-calorie diet containing (< 600 Kcal/day) demonstrated a notable decrease in the occurrence of Ventilator-Associated Pneumonia (VAP) when contrasted with delayed EN and a high-calorie diet. EN was associated with a marked decrease in adverse events including aspiration pneumonia, emesis, and the escalation of respiratory support. Conclusion: EN is safe and effective in critically ill patients. It is advisable for future research to investigate the monitoring of larger sample sizes to ascertain the most effective feeding methods in the intensive care unit.

Numerous studies on evaporative cooling systems have been conducted globally, but there is a scarcity of investigations in eastern Africa. The few studies undertaken in this region have primarily focused on their application in food storage and preservation, rather than for building purpose. The goal of this study is to review the most recent advancements in evaporative cooling technology, which would be relevant in eastern Ethiopia and could provide adequate cooling, give adequate thermal comfort, use less energy, and minimize environmental effect in hot and dry areas. There aren't many studies on evaporative cooling systems for building applications in Eastern Africa as a whole, thus this review has taken into account studies conducted in regions with climates similar to eastern Ethiopia. This study covers the classification, operation, and performance of evaporative cooling systems in hot and dry climate. Evaporative cooling systems work well in hot and dry climates, as revealed by this review study.

This study presents a novel polyurethane-activated carbon composite (PACC) as an effective and sustainable adsorbent for treating lead-ion-contaminated waters. The PACC was characterized using SEM-EDX, FTIR, BET, XRD, and TGA to evaluate its physicochemical and thermal properties. Furthermore, the PACC was employed in an experimental column adsorption setup to investigate its adsorption performance and to develop a dynamic method suitable for industrial implementation. Parameters such as bed height (50, 100, 150 mm), flow rate (4, 6, 8 mL min-1), pH (2, 4, 6), and initial metal ion concentrations (10, 50, 100 mg L-1) were examined. The experimental data exhibited strong agreement with the Thomas and Yoon-Nelson models (R2 ≥ 0.96), indicating efficient adsorption mechanisms. Remarkably, the depleted adsorbent has the potential for facile regeneration without substantial loss in capacity. The PACC demonstrated excellent adsorption performance for lead ions in aqueous solutions in a fixed-bed column system. Thus, the novel PACC material holds potential for scalable application in industrial settings to address water pollution challenges, especially in regions with uncontrolled effluent discharge.

Hydrogen storage in general is an indispensable prerequisite for the introduction of a hydrogen energy based infrastructure. In this respect, high-pressure metal hydride (MH) tank systems appear to be one of the most promising hydrogen storage techniques for automotive applications using proton exchange membrane (PEM) fuel cells. These systems bear the potential of achieving a beneficial compromise of comparably large volumetric storage density, a wide working temperature range, comparably low liberation of heat, and increased safety. The debatable term unstable metal hydride stands in the literature short for metal hydrides with high dissociation pressure at comparably low temperature. Such compounds may help to improve the merit of high-pressure MH tank systems. Consequently, in the last few years, some materials for possible on-board applications in such tank systems have been developed. This review summarizes the state-of-the-art developments of these metal hydrides, mainly including intermetallic compounds and complex hydrides and gives some guidelines for future developments. Since typical laboratory hydrogen uptake measurements are limited to 200 bar, a possible threshold for defining unstable hydrides could be a value of their equilibrium pressure of peq > 200 bar for T < 100°C. However, these values would mark a technological future target and most current materials, and those reported in this review, do not fulfill these requirements and need to be seen as current stages of development towards the intended target. For each of the aforementioned categories in the review, special care was taken not only to covers the pioneering and classical research, but also to portrait the current status and latest advances. For intermetallic compounds, key aspects focus on the influence of partial substitution on absorption/desorption plateau pressure, hydrogen storage capacity and hysteresis properties. For complex hydrides, the preparation procedures, thermodynamics and theoretical calculation are presented. Besides, challenges, perspectives, and development tendency of this field are also discussed.

With the growing demand for personal protective equipment (PPE) in the face of the pandemic events caused by SARS-COV-2, the opportunity arises for the development of materials with characteristics such as antimicrobial, antiviral, antifungal activity, etc. The use of polymeric nanocomposites based on polyester/copper offers an alternative of great interest due to the versatility of the raw material and the high efficiency of copper as an antimicrobial additive. In this study, textile fibers prototypes with different Cu nanoparticles (CuNP) content were produced using melt-spinning to obtain bi-component multifilament fibers, and melt-blowing to obtain non-woven fabrics. The prototypes were tested against different pathogenic microorganisms such as S. aureus, E. coli, and C. albicans. It was shown that bi-component fibers offer more excellent protection against pathogens, while non-woven fabric only shows activity against E. coli. It was possible to identify that the CuNP were confined exclusively in the outer cover of the bi-component fibers, using different analytical techniques, which may be associated with the increase in antimicrobial activity, compared to the fibers present in the non-woven fabric, even when they present the same CuNP content.

Glycosylation is a common post-translation modification present on majority of eukaryotic proteins. Therefore, it is dependent on the host cell line and affected by the cell culture and purification process. Additionally, glycosylation of therapeutic biologics is known to have a profound impact on binding and downstream effector functions. Hence, glycosylation is increasingly considered a critical quality attribute (CQA) of biopharmaceutical drugs and has been showed to affect the safety and efficacy of these molecules. Therefore, regulatory agencies have adopted a Quality by Design (QbD) approach for glycan monitoring at various steps with stringent controls to ensure efficacy and safety. This requires multiple, orthogonal fit-for-purpose tools to study the process. One key unmet need in downstream organizations of large pharmaceutical companies is a real-time, rapid glycan detection and quantification tool to guide purification/expression process. To meet this need, we have developed a selective, colorimetric assay which selectively stains sugar moieties (glycosylated IgGs) which appears as magenta bands on an SDS-PAGE resolved gel. The selectivity arises because the method leverages stereochemical differences of hydroxyl groups between amino acids and carbohydrates to selectively stain the primary alcohol in carbohydrates but not in amino acids. Specifically, our method selectively oxidizes the ‘cis-diol’ group in carbohydrates to aldehydes and stains the aldehydes on an SDS-PAGE gel by Schiff’s reaction. Our method is semi-quantitative and has comparable sensitivity to Coomassie with LoD of around 50ng. The method can detect glycosylated IgGs produced in multiple cell lines (including HEK and CHO), thereby enabling us to study batch-to-batch variability and can critically stain both N-linked and O-linked glycosylation. We also show that the assay can be used as a downstream purification guide for process analytics following ion-exchange and hydrophobic interaction chromatography.

The Circular Economy has been of growing significance within academic, policymaking and industry groups. Latest developments in the field of Circular Economy has led to an expansion of CE studies focused on interrogating CE as a paradigm, its relationship with sustainability and concepts and definitions of the Circular Economy. Research has also identified the significant potential of applying circular approaches to areas of the economy, including manufacturing and Industry 4.0, which, with data, is enabling latest the advances in digital technologies. This is the first review paper to integrate the fields of CE and digital technologies resulting in a framework which provides directions for policymakers and guidance for future research. To achieve this, we conduct a systematic literature review of the empirical literature related to digital technologies, industry 4.0 and circular approaches, from the point of the 9 Rs. The systematic literature review (SLR) is based on peer-reviewed articles published between 2000-2018. The findings reveal that while research on the circular economy has been on an annual rise, research on digital technologies enabled circular economy is still relatively an untouched area of research across all nine (9) circular approaches. As such this is an area rife for further research. This paper also presents illustrative charts and graphs to summarize the current trends in circular economy research in manufacturing. From this, a framework for future circular economy research for manufacturing for digital technologies is proposed.

A timely inventory of agricultural areas and crop types is an essential requirement for ensuring global food security. Satellite remote sensing has proven to be an increasingly more reliable tool to identify crop types. With the Copernicus program and its Sentinel satellites, a growing source of satellite remote sensing data is publicly available at no charge. Here we use joint Sentinel-1 radar and Sentinel-2 optical imagery to create a crop map for Belgium. To ensure homogenous radar and optical input across the country, Sentinel-1 12-day backscatter composites were created after incidence angle normalization, and Sentinel-2 NDVI images were smoothed to yield dekadal cloud-free composites. An optimized random forest classifier predicted the 8 crop types with a maximum accuracy of 82% and a kappa coefficient of 0.77. We found that a combination of radar and optical imagery always outperformed a classification based on single-sensor inputs, and that classification performance increased throughout the season until July, when differences between crop types are largest. Furthermore we showed that the concept of classification confidence derived from the random forest classifier provided insight in the reliability of the predicted class for each pixel, clearly showing that parcel borders have a lower classification confidence. We concluded that the synergistic use of radar and optical data for crop classification led to richer information increasing classification accuracies compared to optical-only classification. Further work should focus on object-level classification and crop monitoring to exploit the rich potential of combined radar and optical observations.

The exposure of employees to specific risks is usually due to increasing levels of work-related stress, which negatively affects their skills and effectiveness in their job duties, lead-ing to the onset of physical/mental illnesses, mistakes, or even accidents. The aim of this study is to investigate the psychosocial risks experienced by nurses in tertiary hospitals in Greece and their association with their attitudes towards safety and the occurrence of medication errors. The research was conducted in four tertiary hospitals in Greece, with the participation of 514 nurses of all educational levels. Questionnaires were used to collect data on work-related stress, professional burnout, and medication errors. The results highlighted that psychosocial risks, such as high work pressure and lack of support, are directly linked to professional burnout and an increased likelihood of medication errors. The necessity of social support, job autonomy, and work-life balance are underscored as critical factors for reducing stress and improving the quality of care. Specific strategies are proposed to enhance the mental health of nurses and improve working conditions.

Research in renewable energy sources and micro-grid systems is critical for the evolving power industry. Micro-grids can supply diverse loads while reducing dependency on the utility grid. This paper models both pico-grids and nano-grids in the Singapore Institute of Technology Punggol campus, incorporating solar PV, energy storage systems (ESS), power electronics converters, and both DC and AC loads, along with utility grid connections. The pico-grid includes a battery storage system, a single-phase inverter linked to a single-phase grid, and DC and AC loads. The nano-grid comprises solar PV panels, a boost converter, a battery storage system, a three-phase inverter connected to a three-phase grid, and AC loads. Both the pico-grid and nano-grid are configurable in standalone or grid-connected modes. This configuration flexibility allows for detailed operational analysis under various conditions. The study conducts subsystem-level modeling before integrating all components into the simulation environment. MATLAB/Simulink is utilized to model, simulate, and analyze the power flow in both the pico-grid and nano-grid under different operating conditions.

The present study provided a comprehensive overview of the current state of research on the Urban Metaverse, focusing on its integration into urban planning and design, as well as the ethical, social, and economic implications in urban settings. This study aims to evaluate the present standing and scope of the metaverse in the context of urban planning and city design; investigate the obstacles and remedies in integrating metaverse components into urban spaces; and explore the ethical, social, and economic ramifications of the metaverse in urban settings. The methodology involved a qualitative investigation of the relevant literature using academic databases and a review of thirty-two selected studies published between 2022 and 2024. The findings emphasise the changing nature of interpersonal relationships, potential alienation from physical spaces, and ethical implications of technology-driven urban changes. The study also highlights the potential opportunities and challenges associated with incorporating the metaverse into urban environments and offers strategies to address these challenges, including the formulation of data protection regulations, expansion of infrastructure, and ensuring equal access for all residents. The implications of the findings underscore the necessity of regulatory frameworks, technological investments, ethical considerations, and inclusive governance structures to ensure inclusive and sustainable urban development in the emerging era of the metaverse.

Radiotheranostics refers to pairing of radioactive imaging biomarkers with radioactive therapeutic compounds that deliver ionizing radiation. Given the introduction of very promising radio-pharmaceuticals, the radiotheranostics approach is creating a novel paradigm in personalized, targeted radionuclide therapies (TRTs), also known as radiopharmaceuticals (RPTs). Radiother-apeutic pairs targeting somatostatin receptors (SSTR) and prostate-specific membrane antigens (PSMA) are increasingly used to diagnose and treat patients with metastatic neuroendocrine tumors (NETs) and prostate cancer. In parallel, radiomics and artificial intelligence (AI) as important areas in quantitative image analysis are paving the way for significantly enhanced workflows in diagnostic and theranostic fields, from data and image processing to clinical decision support, improving patient selection, personalized treatment strategies, response prediction, and prognostication. Furthermore, AI has the potential for tremendous effectiveness in patient dosimetry which copes with complex and time-consuming tasks in the RPT workflow. The present work provides a comprehensive overview of radiomics and AI application in radio-theranostics, focusing on pairs of SSTR- or PSMA‑targeting radioligands, describing the funda-mental concepts and specific imaging/treatment features. Our review includes ligands radio-labeled by 68Ga, 18F, 177Lu, 64Cu, 90Y, and 225Ac. Specifically, contributions by radiomics and AI towards improved image acquisition, reconstruction, treatment response, segmentation, restag-ing, lesion classification, dose prediction, and estimation as well as ongoing developments and future directions are discussed.

The identification and quantitative determination of wool and fine animal fibers are of great interest in the textile field because of significant price differences between them and common adulterations in raw and processed textiles. Since animal fibers have remarkable similarities in their chemical and physical characteristics, specific identification methods have been studied and proposed following advances in analytical technologies. The identification methods of wool and fine animal fibers are reviewed in this paper and the results of relevant studies are listed and summarized, starting from classical microscopy methods which are still used today not only in Small to Medium Enterprises but also in large industries, research studies and quality control laboratories. Particular attention has been paid to image analysis, Nir spectroscopy and proteomics which constitute the most promising technologies of quality control in the manufacturing and trading of luxury textiles and can find application in forensic science and archeology.

Antibiotics (ABs) are common medications used for treating infections. In cancer patients treated with immune checkpoint inhibitors (ICIs), concomitant exposure to ABs may impair the efficacy of ICIs and lead to a poorer outcome compared to AB non-users. We report here the results of a meta-analysis evaluating the effects of ABs on the outcome of patients with solid tumors treated with ICIs. PubMed, the Cochrane Library, and Embase were searched from inception until September 2019 for observational or prospective studies reporting prognosis of adult patients with cancer treated with ICIs and with or without ABs. Overall survival (OS) was the primary endpoint, and progression-free survival (PFS) was the secondary endpoint. The effect size was reported as hazard ratios (HRs) with a 95% confidence interval (CI), and an HR > 1 associated with a worse outcome in ABs users compared to no-ABs users. Fifteen publications were retrieved for a total of 2363 patients. In the main analysis (n = 15 studies reporting data), OS was reduced in patients exposed to ABs before or during treatment with ICIs (HR = 2.07, 95%CI 1.51–2.84; P<.01). Similarly, PFS was inferior in ABs users in n = 13 studies with data available (HR = 1.53, 95%CI 1.22–1.93; p<.01). In cancer patients treated with ICIs, AB use significantly reduces OS and PFS. Short duration/course of ABs may be considered in clinical situations in which they are strictly needed.

Systems Engineering is an ubiquitous discipline of Engineering overlapping industrial, chemical, mechanical, manufacturing, control, software, electrical, and civil engineering. It provides tools for dealing with the complexity and dynamics related to the optimisation of physical, natural, and virtual systems management. This paper presents a review of how multi-agent systems and complex networks theory are brought together to address Systems Engineering and management problems. The review also encompasses current and future research directions both for theoretical fundamentals and applications in Industry. This is made by considering trends such as mesoscale, multiscale, and multilayer networks; along with the state-of-art analysis on network dynamics and intelligent networks. Critical and smart infrastructure, manufacturing processes, and supply chain networks are instances of research topics for which this literature review is highly relevant.

There is a growing need to utilize community interventions to address modifiable behaviors that lead to poor health outcomes like obesity, diabetes, and heart disease. Poor health outcomes can be tied to community-level factors such as food deserts (identified areas with low access to fresh fruit, vegetables, and other healthful whole foods) and individual behaviors like sedentary lifestyles, consuming large portion sizes, and eating high-calorie fast food and processed foods. Through a social ecological approach with family, organization and community, the Faithful Families Cooking and Eating Smart (FFCES) intervention was created to address these concerns in a rural South Carolina community. FFCES used gatekeepers to identify 18 churches and 4 apartment complexes in low-income areas. 176 participants completed both pre- and post- survey measures. Student’s t-test measures found statistically significant change in participant perception of food security (0.39, p-value=0.005), self-efficacy with physical activity and healthy eating (0.26, p-value=000), and cooking confidence (0.17, p-value=.01). There was not significant change in cooking behaviors as assessed through the Cooking Behaviors Scale. FFCES shows that a social ecological approach can be effective at increasing and improving individual healthy behaviors and addressing community-level factors in low-income rural communities.

A new copper(I) complex, [Cu2(L)2dppm](PF6)2 (1) [L = 3-(2-Pyridyl)-5,6-diphenyl-1,2,4-triazine and dppm: Bis(diphenylphosphino)methane] was prepared and characterized by IR, 1H-NMR, 31P-NMR spectroscopy, elemental and thermogravimetric analysis, and single-crystal X-ray diffraction technique. Complex 1 is a dinuclear compound, showing that L and dppm act as tridentate and bidentate chelating ligands, respectively. The two Cu(I) atoms exhibit a distorted tetrahedral coordination sphere embedded in N3P environments. The supramolecular interactions in the solid-state structure are characterized by C−H···N, C−H···F, C-H···π and π···π intermolecular interactions that were analyzed by inspection of the Hirshfeld surface and fingerprint plots. Additionally, the complex was studied experimentally in solution by UV–Vis spectroscopy and cyclic voltammetry; also, theoretical studies with Time-Dependent Density Functional Theory (TD-DFT) were performed. Moreover, the optical and electrochemical properties have been studied, focusing on the band gap. Compound 1 has been used as a co-sensitizer in a dye-sensitized solar cell, showing good activity.

This study attempts to investigate a method for creating an index from mobility data that not only correlates with the number of people who relocate to a place but also has causal influence on the number of such individuals. By creating an index based on human mobility data, it becomes possible to predict the influence of urban development on future residential movements. In this paper, we propose a method called the travel cost method for multiple places (TCM4MP) by extending the conventional travel cost method (TCM). We assume that the opportunity cost of travel time on non-working days reflects the convenience and amenities of a neighborhood. However, conventional TCM does not assume that the opportunity cost of travel time varies according to the departure place. In this paper, TCM4MP is proposed to estimate the opportunity cost of travel time with respect to the departure place. We consider such estimation to be possible due to the use of massive mobility data. We assume that the opportunity cost of travel time on non-working days reflects the convenience and amenities of the neighborhood. Therefore, we consider that the opportunity cost of travel time has a causal influence on future residential mobility. In this paper, the validity of the proposed method is tested using the smart card data of public transportation in Western Japan. Our proposed method is beneficial for urban planners in estimating the effects of urban development and detecting the shrinkage and growth of a population.

The addition of prebiotics is one of the most important ways to improve the techno-functional properties of bread. In this study, the effects of resistant starch, polydextrose, and inulin on the wheat flour, dough, and bread properties were investigated. In farinography results, resistant starch significantly increased the development time (2:18) with a boosting effect, but polydextrose (1:48) and inulin (1:36) weakened the dough (P &lt;0.05). Inulin, polydextrose, and resistant starch had the most effect on reducing water absorption (40, 43.2, and 48.9) respectively (P &lt;0.05). According to extensography data, inulin had the best result in baking compared to other polysaccharides. In terms of baked breads, samples containing resistant starch had high moisture that could be due to starch gelatinization and moisture-retaining, which delays the staling process of bread. Inulin, polydextrose, and resistant starch prebiotic ingredients affected dough rheological properties and bread quality, and organoleptic characteristics, however, resistant starch was the best.

Calcium sulfate (CS) materials containing terbium ions at 0, 1.0, or 2.0 mol.% were obtained by mechanochemical synthesis. According to X-ray diffraction data, the powder materials are characterized by the presence of a CaSO4×0.5H2O phase, while Tb3+ is incorporated into the lattice at ≤1.0 mol.%. Specific surface area enlarged from 2.1 to 22.5 m2/g as crystallite size decreased from 68 to 31 nm and the Tb3+ concentration increased up to 1.0 mol.%. Thermal analysis showed that terbium slightly raises the temperature of CaSO4×2H2O-to-CaSO4 transition. The presence of Tb3+ did not affect the solubility of the CS cements. Furthermore, after 7 days of soaking of the materials in a simulated body fluid, a calcium phosphate layer formed corresponding to a hydroxyapatite phase, in contrast to the pure cements. Luminescent properties were studied by excitation at 276 nm. The recorded emission peaks of the CS materials indicated that the luminescence of the samples is green and blue, with the most intense luminescence observed for samples containing 1.0 mol.% Tb3+. The developed materials can find applications in medicine as bioimplants for the regeneration and restoration of bone tissue with a possibility of noninvasive monitoring of the bone restoration process.

Tumor necrosis factor (TNF) inhibitors (anti-TNFs) represent a cornerstone of the treatment of various immune-mediated inflammatory diseases and are among the most commercially successful therapeutic agents. Knowledge of TNF binding partners is critical for identification of the factors able to affect clinical efficacy of the anti-TNFs. Here we report that among eighteen representatives of the multifunctional S100 protein family only S100A11, S100A12 and S100A13 interact with the soluble form of TNF (sTNF) in vitro. The lowest equilibrium dissociation constants (Kd) for the complexes with monomeric sTNF determined using surface plasmon resonance spectroscopy range from 2 nM to 28 nM. The apparent Kd values for the complexes of multimeric sTNF with S100A11/A12 estimated from fluorimetric titrations are 0.1-0.3 µM. S100A12/A13 suppress the cytotoxic activity of sTNF against Huh-7 cells, as evidenced by the MTT assay. Structural modeling indicates that the sTNF-S100 interactions may interfere with the sTNF recognition by the therapeutic anti-TNFs. Bioinformatic analysis reveals dysregulation of TNF and S100A11/A12/A13 in numerous disorders. Overall, we have shown a novel potential regulatory role of the extracellular forms of specific S100 proteins that may affect efficacy of anti-TNF treatment in various diseases.

The application of space robotic manipulators and heightened autonomy for ios represents a paramount pursuit for leading space agencies, given the substantial threat posed by space debris to operational satellites and forthcoming space endeavors. This work presents a guidance algorithm based on drl to solve for the space manipulator path-planning during the motion synchronization phase with the mission target. The goal is the trajectory generation and control of a spacecraft equipped with a 7-dof robotic manipulator, such that its end effector remains stationary with respect to the target point of capture. The ppo drl algorithm is used to optimize the manipulator’s guidance law, and the autonomous agent generates the desired joints rates of the robotic arm, which are then integrated and passed to a model-based feedback linearization controller. The agent is first trained to optimize its guidance policy and then tested extensively to validate the results against a simulated environment representing the motion synchronization scenario of an ios mission.

The combination of wet-lab experimental data on multi-site combinatorial mutations and machine learning is an innovative method in protein engineering. In this study, we present an improved innovative sequence–activity relationship (innov'SAR) methodology based on novel descriptors and digital signal processing (DSP) to construct a predictive model. In this improved approach, 21 experimental (R)-selective amine transaminases from Aspergillus terreus (AT-ATA) were used as an input to predict higher thermostability than that predicted using the existing data. We successfully improved the determination coefficient (R2) of the model from 0.66 to 0.92. In addition, root mean square deviation (RMSD) and root mean square fluctuation (RMSF) were estimated and conformation analysis based on molecular dynamics simulations was performed to verify the enhanced thermal stability of the screened mutants. The improved innov'SAR algorithm enhanced the predictive accuracy, suggesting a method for modifying the stability of AT-ATA, which may help in directed evolutionary screening and open up new avenues for protein engineering.

The purpose of the article is to determine the peculiarities of using of teaching elements of research-based training at the Institute of Human Sciences of Borys Grinchenko Kyiv University. Based on the focus group methodology, the authors identify the key methodological characteristics of research-based training, which have been put into basis of analysis of educational programs for the purpose of determining the application of tasks that contribute to the development of research skills of students. The study used a method of focus group. Its purpose was to obtain the necessary information from the participants to describe the methodological basis and justification of methods, forms, indicators, etc. of research-based training system among people who are competent, have experience in this field. After that, the method of "theoretical sampling" was used, which enabled to formulate generalized characteristics according to the results of focus groups. The practical value of the study is determination of the methodological characteristics of research-based training which is the basis for the application of tasks by university teachers that promote the development of research competence of students. The research is one of the first attempts to determine the methodological characteristics of research-based training in Ukraine.

The accurate virus detection, strain discrimination, and source attribution of contaminated food items remains a persistent challenge because of the high mutation rates anticipated to occur in foodborne RNA viruses, such as Hepatitis A virus (HAV). This has led to predictions of the existence of more than one sequence variant between the hosts (inter-host) or within an individual host (intra-host). However, there have been no reports of intra-host variants from an infected single individual, and little is known about the accuracy of the single nucleotide variations (SNVs) calling with various methods. In this study, the presence and identity of viral SNVs, either between HAV clinical specimens or among a series of samples derived from HAV clone1-infected FRhK4 cells, were determined following analyses of nucleotide sequences generated using next-generation sequencing (NGS) and pyrosequencing methods. The results demonstrate the co-existence of inter- and intra-host variants both in the clinical specimens and the cultured samples. The discovery and confirmation of multi-viral RNAs in an infected individual is dependent on the strain discrimination at the SNV level, and critical for successful outbreak traceback and source attribution investigations. The detection of SNVs in a time series of HAV infected FRhK4 cells improved our understanding on the mutation dynamics determined probably by different selective pressures. Additionally, it demonstrated that NGS could potentially provide a valuable investigative approach toward SNV detection and identification for other RNA viruses.

Understanding and addressing dehumanization in healthcare is crucial due to its profound impact on patient care, ethical implications on patient dignity and autonomy, and its potential to affect the psychological well-being of healthcare professionals. The primary aim of this study was to develop reliable and valid instruments measuring two different types of dehumanization, namely animalistic dehumanization (i.e., stripping one of their uniquely human characteristics) and mechanistic dehumanization (i.e., striping one of their human nature characteristics) among healthcare professionals. In a cross-sectional validation study among healthcare professionals, we developed and tested measures of both animalistic and mechanistic dehumanization, focusing on dehumanization of patients (hetero-dehumanization) and oneself (self-dehumanization), respectively. All measures were developed and validated based on a concept analysis, a literature review, and an appraisal of pre-existing scales. The research was conducted among 400 nurses and medical doctors employed in Greek public hospitals. Coefficient Validity Ratio results showed that 100% of items were acceptable for both measures. The newly developed hetero-dehumanization scale encompassed two-factors (factor 1: animalistic dehumanization, factor 2: mechanistic dehumanization, Cronbach’s alpha was equal to 0.86 for each measure). The self-dehumanization scale was a mono-factorial measure mechanistic dehumanization (Cronbach’s alpha = 0.97). Two validated measures of (self and hetero-) animalistic and mechanistic dehumanization measures were developed for the assessment of dehumanization among health professionals, which will form the basis for future research in this important scientific field.

Bacillus Calmette-Guérin (BCG) immunotherapy has been a cornerstone treatment for non-muscle invasive bladder cancer for decades and still faces challenges, such as severe immune adverse reactions, which reduce its use as a first-line treatment. This review examines BCG therapy’s history, mechanisms, and current status, highlighting how nanotechnology and bioengineering are revitalizing its application. We discuss novel nanocarrier systems aimed at enhancing BCG's efficacy while mitigating specific side effects. These approaches promise improved tumor targeting, better drug loading, and enhanced stimulation of anti-tumor immune responses. Key strategies involve using functional BCG cell wall components and co-delivering BCG with chemotherapeutics to achieve synergistic effects. While most studies remain experimental, this research direction offers hope for overcoming BCG's limitations and advancing bladder cancer immunotherapy. Further elucidation of BCG's mechanisms and rigorous safety evaluations of new delivery systems will be crucial for translating these innovations into clinical practice.

Concentrator photovoltaic (CPV) technology offers an alternative to conventional photovoltaic systems, focusing on the concentration of solar radiation through the optics of the system onto smaller and more efficient solar cells. However, the surface on which the solar beam is incident must remain oriented towards the position of the sun, which requires the use of large and heavy external elements known as solar trackers. In addition to their size, these elements must be as accurate as possible to avoid misalignment. To avoid the need of these solar trackers, the concept of tracking-integrated concentrating systems has been developed. This technology has been researched to make CPV systems accessible in places where conventional systems are not viable, such as building roofs or agrivoltaic fields. This review presents a detailed classification of the existing designs in the literature and providing an overview of this type of system. By eliminating the need for external solar trackers, tracking-integrated CPV systems offer a promising solution to increase the adoption of this technology. Therefore, it is expected that these systems will be a viable and effective option for solar power generation.

The soybean cyst nematode (SCN), Heterodera glycines Ichinohe, is one of the most destructive plant-parasitic nematodes in soybean production worldwide. The use of resistant soybean is the most effective alternative for its management. However, SCN-resistant soybean cultivars with increased yield and favorable agronomic traits remain limited in the market. Here, we developed a new SCN-resistant soybean cultivar Nongqing 28 from the cross the female parent cultivar ‘An 02-318’ × a male parent line F2 (Hei 99-980 × America Xiaoheidou). Resistance evaluation suggested that Nongqing 28 displayed stable resistance to SCN race 3 in pot assays and the 4-year field experiments, including inhibition of SCN development and reduction in female and cyst numbers. The average yield of Nongqing 28 were 2,593 kg/ha and 2,660 kg/ha in the 2-year regional trails and the 1-year production trials, with yield increase of 6.2% and 8.1% compared with the local cultivar Nengfeng 18, respectively. The average seed-fat contents in Nongqing 28 reached 21.26%. Additionally, RNA-seq analysis revealed that the resistance of Nongqing 28 to SCN infection is involved in pathogen perception and defense activation, such as reactive oxygen species burst, calcium-mediated defense signaling, hormonal signaling, the MAPK signaling cascade, and phenylpropanoid biosynthesis. In summary, this study provides a detailed characterization of a novel SCN-resistant soybean cultivar with high-oil and yield potential.

Post-operative chemotherapy is still required for the treatment of glioblastoma (GBM), and nanocarrier-based drug delivery has been identified as one of the most effective methods. However, the blood-brain barrier (BBB) and non-specific delivery to non-tumor tissues can significantly limit drug accumulation in tumor tissues and cause damage to nearby normal tissues. This study describes a targeted cancer therapy approach that uses AS1411 aptamer-conjugated nanospheres, 100-300 nm in size, loaded with doxorubicin (Dox) to selectively identify tumor cells overexpressing nucleolin (NCL) proteins. The study demonstrates that the active target model, which employs aptamer-mediated drug delivery, is more effective than nonspecific enhanced permeability and maintenance (EPR)-mediated delivery and passive drug delivery in improving drug penetration and maintenance in tumor cells. Additionally, the study shows the potential for anticancer effects through 3D spheroidal and in vivo GBM xenograft models. The DNA-protein hybrid nanospheres utilized in this study offer numerous benefits, such as efficient synthesis, structural stability, high drug loading, dye labelling, biocompatibility, and biodegradability. When combined with nanospheres, the 1411 aptamer has been shown to be an effective drug delivery carrier for precisely targeting tumors. This combination has the potential to produce anti-tumor effects in active targeted therapy of GBM.

The use of Lactic Acid Bacteria (LAB) for probiotic enrichment of minimally processed fruit is a well-established practice in literature. In addition, several LAB demonstrated a strain-specific ability to control harmful microorganisms and decay agents, improving shelf-life, maintaining quality and promoting the safety of fruits and vegetables. Edible coatings can help modulate phenomena of gas exchange and water loss by fruits, representing protection from physical damage and spoilage phenomena linked to oxidation and the development of undesired microorganisms. At the same time, the coating can represent an innovative delivery matrix for the LAB strains of potential interest to improve safety and quality in the postharvest management of fruits. In this work, five Lactiplantibacillus plantarum strains, previously characterized for their probiotic and antifungal activity, have been incorporated into a sodium alginate coating to develop edible probiotic coatings with antifungal properties for table grapes cv. Italia. The transfer of probiotics and their survival were evaluated by comparing coated and uncoated table grapes during 14 days of cold storage at 4 °C. The alginate edible coating increased the number of probiotics transferred to the surface of the berries from about 5 to more than 7 Log CFU/g, with a crucial impact on the potential functional attributes of the final product. The ability of the functionalised coatings to counteract the decay development was evaluated on table grapes berries artificially contaminated with Aspergillus niger CECT 2805. A significant reduction of lesion diameter was observed in alginate coating with L. plantarum 11-A. The lesion diameter reduction was also accompanied by the reduction of the symptoms of infection, such as browning around the wound. These results suggest the application of selected strains of L. plantarum as promising bio-resources to enhance the overall value of ready-to-eat fruits and vegetables, particularly in combination with edible coating as a carrier matrix. While a strain-dependent effect was not detected with respect to the improvement of the number of cells in the edible coating, a variability depending on the biotype used was detected for the properties linked to biocontrol, suggesting that the inclusion in edible packaging may represent an innovative criterion in the selection of lactobacilli to be applied postharvest.

Still’s disease, also known as systemic juvenile idiopathic arthritis, is an autoimmune disorder with a triad of fever, salmon pink rash, and inflammatory polyarthritis. Its diagnosis is quite challenging due to the lack of specific symptoms and overlap with many other rheumatological and autoimmune disorders. However, recent studies have shown that high serum ferritin levels can act as a biomarker for this disease. Ferritin is an intracellular iron storage protein that acts as a pro-inflammatory reactant. There are various explanations indicating the presence of higher ferritin levels in Still's disease. High ferritin tells us about disease severity, and prognosis and can also predict life-threatening complications that can be easily prevented and thus it helps in reducing mortality associated with Still's disease. However, there are certain limitations to the use of ferritin as the only diagnostic marker for Still's disease. Overcoming those limitations can take the diagnosis of Still's disease to a higher level.

As the number of Small and Medium Enterprises (SMEs) rises in the world, the amount of sensitive data used also increases, making them targets for cyberattacks. SMEs face a host of issues such as lack of resources, and poor cybersecurity talent, resulting in multiple vulnerabilities that increase overall risk. Cybersecurity risk assessment frameworks have been developed by multiple organizations such as the National Institute of Science and Technology (NIST) and the International Organization for Standardization (ISO), but they are complicated to understand, and challenging to implement. This research aimed to create an effective cybersecurity risk assessment framework specifically for SMEs while considering their limitations. This was achieved by first identifying common threats and vulnerabilities and categorizing them according to their importance, and risk. Secondly, popular frameworks like the NIST CSF and ISO 27001/2 were analyzed for their proficiencies and deficiencies while identifying relevant areas for SMEs. Finally, novel techniques catered to SMEs were explored and incorporated to create an effective framework for SMEs. This framework was also developed in the form of a tool, providing an interactive and dynamic environment. The tool was effective and the framework is a promising start but requires more quantitative analysis.

Integrating a grid-connected battery into a Renewable Energy Community boosts Collective-Self-Consumption of photovoltaic produced energy and allow to perform Energy Arbitrage in the day-ahead and intraday electricity market. However, is it a cost-effective investment? The proposed analysis relay on Net Present Value assessment. Ageing affects are integrated and sensitivity analyses are conducted: considering community customers number, electricity mar-ket prices, battery cost, size and the decision to engage in energy arbitrage. Each scenario under-goes a 20-year hourly simulation using an ageing aware rolling-horizon 24-hours-looking-ahead scheduling, optimized with Mixed-integer linear Programming. Forecast errors, provid-ing of ancillary services, real time control and grid constrains are not taken into account. Simulations conducted on the Italian market indicates that a battery dedicated solely to collec-tive self-consumption is not economically appealing. However, integrating Energy Arbitrage, despite impact on battery lifespan, halves the payback period and enhances the attractiveness of larger battery investments. The Net Present Value is contingent upon battery size, customer number and market prices. However, if battery cost does not exceed 200 €/kWh the investment become cost-effective across all scenarios.

Alginate-silver nanocomposites in the form of spherical beads and films were prepared using a green approach by using the aqueous extract of Ajwa dates seeds. The nanocomposites were fabricated by in situ reduction and gelation method by ionotropic crosslinking using calcium ions in solution. The rich phytochemicals of the dates seeds extract played a dual role as reducing and stabilizing agent in the synthesis of silver nanoparticles. The formation of silver nanoparticles was studied using UV-Vis absorption spectroscopy and a distinct surface plasmon resonance (SPR) peak at 421 nm characteristic of silver nanoparticles confirmed the green synthesis of silver nanoparticles. The morphology of the nanocomposite beads and film was compact with even distribution of silver nanoclusters. The catalytic property of the nanocomposite beads was evaluated for the degradation of 2-nitrophenol in the presence of sodium borohydride. The degradation followed pseudo-first order kinetics with a rate constant of 1.40 ´ 10^-3 s^-1 at 23 °C with an activation energy of 18.45 kJ mol^-1. The thermodynamic parameters such as changes in enthalpy and entropy were evaluated to be 15.22 kJ mol^-1 and -197.50 J mol^-1 K^-1, respectively. The nanocomposite exhibited properties against three clinically important pathogens (Gram-positive and Gram-negative bacteria)

Recently, deep neural networks (DNNs) have been widely used in various fields such as autonomous vehicles and smart homes. Since these DNNs can be directly implemented on edge devices, they offer advantages such as real-time processing in low-power and low-bandwidth environments. However, deployment of DNNs in embedded systems, including edge devices, exposes them to threats such as fault injection attacks. In this paper, we introduce two methods to induce misclassifications by using clock and voltage glitch-based fault attacks in devices where DNN models are executed. As a result of experiments on a microcontroller implemented with a DNN for image classification, we show that glitch injection attacks can lead with high probability to serious misclassifications. Furthermore, we propose a countermeasure to glitch attacks on the softmax function, and confirm that this method is effective in preventing misclassifications.

In the context of crowds innovation and the generative design driven by big language models, the personalized requirements has become the best engine for innovative design. The exploration of personalized requirements has become a key in significantly improving product innovation, concepts feasibility, and design interaction efficiency. To mine a large number of vague and unexpressed implicit requirements of personalized products, a domain knowledge graph-based method is proposed in this research. First, based on the classical theory of design science, the characteristics and categories of personalized implicit requirements are analyzed. Next, in order to improve the practicability and construction efficiency of the domain knowledge graph, a more informative ontology is constructed, and better performing NLP models are proposed. Then, a series of mining methods based on knowledge graph are proposed for the personalized implicit requirements of different categories. Finally, A platform was developed based on the technical solution proposed in this study, and an example verification was conducted in the field of electromechanical engineering. The efficiency improvement of the training model proposed in the research was analyzed, and the practicality of implicit requirement mining methods were discussed.

This paper deals with wh-in situ elements (i.e. wh-elements that stay in the argument position) in islands such as adverbial clauses, conditionals, relative clauses, complement clauses, etc. extracted from corpora of Italian and Spanish. I will show that there are two types of wh-in situ embedded inside an island in these languages. One type is a real genuine question. Another type is an echo question. There are several approaches that convincingly account for the insensitivity of echo questions to islands. The genuine question type is still a puzzle for semantic and syntactic approaches. It turns out that wh-in situ questions with a genuine question interpretation are only possible inside islands that are not marked for sentence type and do not contain any operator that could block the question interpretation of the wh-in situ. This way question alternatives can be passed higher up the clause until they meet a question operator in the matrix clause that interprets them. Consequently, the question is well-formed and interpreted without any problem. Real islands contain semantic operators or quantifiers that interpret question alternatives triggered by wh-in situ until they reach the question morpheme to be interpreted as question alternatives. The result is that the derivation crashes.

Recently, e-commerce companies have been adopting and continuously enhancing personalized product recommendation systems, and there is active research in this field within academia. However, personalized product recommendations in offline retail stores have not yielded significant outcomes thus far. Especially for small-format offline retail businesses like convenience stores, where customer information might be limited, providing personalized product recommendations poses even greater challenges. To address this issue, this study aimed to find a solution by shifting the perspective on recommendation methods and altering the target of recommendations in existing personalized recommendation models. In this study, recommending products that customers need in an offline store was defined as suggesting products that should be introduced and displayed within the store. In other words, the recommendation focus shifted from individuals to the stores themselves. This recommendation system proposes products that individual stores have not yet introduced but are anticipated to be purchased by customers among the products managed by the headquarters. Building upon this, we devised a store-based product recommendation system. The widely used user-based collaborative filtering model, a common technique in existing recommendation systems, was adapted into a store-based collaborative filtering model. Furthermore, various rules and logic pertinent to store operations and business considerations for convenience stores were integrated to implement this store product recommendation system. The accuracy and effectiveness of the system were demonstrated through its application in actual convenience stores. Results from the pilot implementation of the system showed that 88% of the newly recommended products in individual stores were sold based on one week of sales data, and the sales revenue was 1.75 times higher than the average sales revenue of those products across the entire company. Survey results on business owners' satisfaction yielded a score of 4.2 out of 5, indicating a high level of contentment. Additional observed effects included the expansion of product range and reduction in order lead times. However, 12% of the total recommended SKUs did not sell within one week, and 34% of the SKUs did not meet the overall average sales quantity. This research holds significance in extending the scope of personalized recommendation studies from primarily online platforms to offline retail businesses like convenience stores. It provides tangible methodologies and outcomes that can be implemented in real-world settings through the construction and validation of an actual system. The study also suggests avenues for future research to address some of the identified limitations.

Underwater target detection is widely used in various applications such as underwater search and rescue, underwater environment monitoring, and Marine resources survey. However, the visibility of the underwater environment and the accuracy of target detection can be affected by complex underwater light changes and unpredictable background noise. To address these issues, we propose an improved underwater target detection algorithm based on YOLOv8n. Our algorithm focuses on three aspects. Firstly, we replace the original C2f module with Deformable Convnets v2 to enhance the adaptive ability of the target region in the convolution check feature map and extract the target region's features more accurately. Secondly, we introduce SimAm, a non-parametric attention mechanism, which can deduce and assign three-dimensional attention weights without adding network parameters. Lastly, we optimize the loss function by replacing the CIOU loss function with the Wise-IOU loss function. To conduct our experiments, we create our own dataset of underwater target detection for experimentation. Meanwhile, we also utilized the Pascal VOC dataset to evaluate our approach. The mAP@0.5 and mAP@0.5:0.95 of the original YOLOv8n algorithm on the underwater target detection were 88.6% and 51.8%, respectively, and the improved algorithm mAP@0.5 and mAP@0.5:0.95 can reach 91.8% and 55.9%. The original YOLOV8n algorithm was 62.2% and 45.9% mAP@0.5 and mAP@0.5:0.95 on the Pascal VOC dataset, respectively. The improved YOLOV8n algorithm mAP@0.5 and mAP@0.5:0.95 were 65.7% and 48.3%, respectively. The floating-point computation volume of the model is reduced by about 6%. The above experimental results prove the effectiveness of our method.

The way in which a person walks, known as human gait, is a significant indicator of overall health and well-being. Abnormalities in gait can indicate the presence of metabolic disorders, such as diabetes or obesity. However, detecting these disorders can be challenging using traditional methods, which often involve subjective assessments or invasive procedures. In this study, a novel methodology known as Criticality Analysis (CA) was proposed for the detection and monitoring of human gait in people with metabolic disorders taking part in an intervention to increase activity and reduce weight. The CA approach utilised inertial measurement unit gait data, alongside clinical health measures. This allows for the control of nonlinear growth in the system, resulting in lower dimensional, nonlinear, free-scale, stable, controlled, and organised trajectories. These trajectories were then analysed using a Support Vector Machine (SVM) algorithm, which is well-suited for this task due to its ability to handle nonlinear and dynamic data. The combination of the CA approach and the SVM algorithm demonstrated high accuracy and non-invasiveness in detecting metabolic disorders, yielding an average accuracy within the range of 78.2% to 90%. Additionally, the classification technique accuracy, at a group level was observed to reduce during period of the intervention (e.g., from week 2 to week 3) alongside changes in fitness and health, which indicates the potential of using the approach to measure and monitor biological systems. As such, this novel methodology has the potential to be a valuable tool for healthcare professionals in detecting and monitoring metabolic disorders, as well as other unknown diseases associated with the human biological system.

As a stimulus signal, coded electrical signals can control the motion behavior of animals, which has been widely used in the field of animal robots. In current research, most of the stimulus signals used by researchers are traditional waveform, such as square waves. To enrich the stimulus waveform, a wireless animal robot stimulation system based on neuronal electrical signal characteristics is presented in this paper. The stimulator uses the CC1101 wireless module to control animal behavior through brain stimulation. The LabVIEW-based graphical user interface(GUI) can manipulate brain stimulation remotely while the stimulator powered by battery. Additionally, the spikes of animals have been simulated by this system through Direct Digital Synthesizer(DDS) algorithm. The GUI enable users to customize the combination of these analog spike signals. The recombined signals are sent to the stimulator through CC1101 as stimulus signals. In vivo experiments conducted on five pigeons verified the efficacy of the stimulation mechanism. The analog spike signal with an amplitude of 3-5V successfully caused the pigeon’s turning behavior. The feasibility of the analog spike signals as stimulus signals was successfully verified. Increased the diversity of stimulus waveform in the field of animal robots.

For adolescents, high aggression is often associated with suicide, physical injury, worse academic performance, and crime. Therefore, there is a need for early identification and intervention for highly aggressive adolescents. The Buss-Warren Aggression Questionnaire (BWAQ) consists of 34 items, and the longer the scale, the more likely participants are to make an insufficient effort response (IER), which reduces the credibility of the results and increases the cost of implementation. The study aimed to develop a shorter BWAQ using machine learning (ML) techniques to reduce the frequency of IER and decrease implementation costs meantime. First, an initial version of the short-form questionnaire was determined using Stepwise Regression and ANOVA F-test. Then, a machine learning algorithm determined the optimal short-form questionnaire (BWAQ-ML). Finally, the reliability and validity of the optimal short-form questionnaire were tested using independent samples. The BWAQ-ML has 88% fewer items than the BWAQ. It has AUC, accuracy, recall, precision, and F1 scores of 0.85, 0.85, 0.89, 0.83, and 0.86, respectively, and good psychometric properties. The BWAQ-ML can effectively measure individual aggression and can be used as a simplified version of BWAQ.

The phenomenon of seat occupancy in university libraries is a prevalent issue. However, existing solutions, such as software-based seat reservations and sensors-based occupancy detection, have proven to be inadequate in effectively addressing this problem. In this study, we propose a novel approach: a serial dual-channel object detection model based on Faster RCNN. Furthermore, we develop a user-friendly web interface and mobile APP to create a computer vision-based platform for library seat occupancy detection. To construct our dataset, we combine real-world data collection with UE5 virtual reality. The results of our tests also demonstrate that the utilization of personalized virtual dataset significantly enhances the performance of the convolutional neural network (CNN) in dedicated scenarios. The serial dual-channel detection model comprises three essential steps. Firstly, we employ Faster RCNN algorithm to determine whether a seat is occupied by an individual. Subsequently, we utilize an object classification algorithm based on transfer learning, to classify and identify images of unoccupied seats. This eliminates the need for manual judgment regarding whether a person is suspected of occupying a seat. Lastly, the web interface and APP provide seat information to librarians and students respectively, enabling comprehensive services. By leveraging deep learning methodologies, this research effectively addresses the issue of seat occupancy in library systems. It significantly enhances the accuracy of seat occupancy recognition, reduces the computational resources required for training CNNs, and greatly improves the efficiency of library seat management.

This paper presents a novel high-power rotary waveguide phase shifter based on circular polarizers specifically engineered for high-power microwave (HPM) applications. The phase shifter is capable of performing a precise 360° linear phase shift through rotation and consists of three parts: a linear polarized to left-handed circular polarized (LP-LHCP) mode converter, a left-handed to right-handed circular polarized (LH-RHCP) mode converter, and a linear polarized to right-handed circular polarized (LP-RHCP) mode converter. The paper analyzes the phase shifting principle, optimizes the three parts of the X-band rotary waveguide phase shifter, and conducts simulation studies on the entire phase shifter made of aluminum. The results show that the reflection is less than -20dB and the transmission efficiency is over 95% within 9.5GHz to 10.2GHz. The phase shift has a linear relationship with the rotation angle by a factor of two within this frequency range. Specifically, the phase shifter can achieve a linear phase shift of 360° when rotated from 0° to 180°, with a maximum deviation of less than 1.2°. Moreover, the power-handling capacity of the phase shifter in vacuum exceeds 242mW.

This paper proposes an optimal trading algorithm based on a novel application of the conventional Control Engineering (CE). We consider a fundamental CE concept, namely, the feedback control and apply it to the Algorithmic Trading (AT). The concrete feedback control strategy is designed in a form of the celebrated Proportional-Integral-Derivative (PID) model. The highly fluctuating nature of the modern financial markets has led to the adoption of a model-free realisation of the generic PID framework. The control theoretical methodology we propose is combined with the advanced statistics for the historical market data. We obtain a specific log-normal probability distribution function (pdf) associated with the specific quantities associated with the available stock data. The empirical log-normal pdf mentioned above makes it possible the necessary PID gains optimization. For this aim, we apply the data-driven optimization approaches and consider the corresponding Monte Carlo solution procedure. The optimized PID trading algorithm we propose is also studied in the Fourier analysis framework. This equivalent frequency domain representation involves a new concept in the financial engineering, namely, the "stock market energy" concept. For the evaluation, we implement the proposed PID optimal trading algorithm and develop a Python based prototype software. We finally apply the corresponding prototype software to a dataset from the Binance BTC / USDT stock market. The experimental result illustrates the implementability of the proposed optimal PID trading scheme and also shows the effectiveness of the proposed CE methods in the modern AT.

When the image quality is evaluated, the human visual system (HVS) infers the details in the image through its internal generative mechanism. In this process, the HVS integrates both local and global information of the image, utilizes contextual information to restore the original image information, and compares it with the distorted image information for image quality evaluation. Inspired by this mechanism, a no-reference image quality assessment method is proposed based on a multitask image restoration network. The multitask image restoration network generates a pseudo-reference image as the main task and produces structural similarity index measure map as an auxiliary task. By mutually promoting the two tasks, a higher quality pseudo-reference image is generated. In addition, when predicting the image quality score, both the quality restoration features and the difference features between the distorted and reference images are used, thereby fully utilizing the information from the pseudo-reference image. To enable the model to focus on both global and local features, a multi-scale feature fusion module is proposed. Experimental results demonstrate that the proposed method achieves excellent performance on both synthetically and authentically distorted databases.

Aerogel-based adsorbents present extraordinary sorption capacity for hexavalent uranium that can be as high as 8.8 mol kg–1 (2088 g kg–1). The adsorption data follow generally the Langmuir isotherm model and the kinetic data are better described by the pseudo-second-order kinetic model, which is associated with chemisorption. Evaluation of the thermodynamic data reveals that the adsorption is generally an endothermic, entropy-driven process (ΔHo, ΔSo > 0). Spectroscopic studies (e.g., FTIR, XPS) indicate that the adsorption is based on the formation of in-ner-sphere complexes between surface active moieties and the uranyl cation. Regeneration and uranium recovery by acidification and complexation using carbonate or chelating ligands (e.g., EDTA) have been found to be successful. The application of aerogel-based adsorbents to uranium removal from industrial processes and uranium-contaminated waste waters was also successful, assuming that these materials could be very attractive as adsorbents in water treatment and uranium recovery technologies. However, the selectivity of the studied materials towards hexavalent uranium is limited suggesting further development of aerogel materials which could be modified by surface derivatization with chelating agents (e.g., salophen, iminodiacetate) presenting high selectivity for uranyl moieties.

Decision making as a result of system dynamics analysis requires, in practice, a straightforward and systematic modelling capability as well as a high-level of customisation and flexibility to adapt to situations and environments that may vary very much from each other. While in general terms a completely generic approach could be not as effective as ad-hoc solutions, the proper application of modern technology may facilitate agile strategies as a result of a smart combination of qualitative and quantitative aspects. In order to address such a complexity, we propose a knowledge-based approach that integrates the systematic computation of heterogeneous criteria with open semantics. The holistic understanding of the framework is described by a reference architecture and the proof-of-concept prototype developed can support high-level system analysis, as well as it suitable within a number of applications contexts - i.e. as a research/educational tool, communication framework, gamification and participatory modelling. Additionally, the knowledge-based philosophy, developed upon Semantic Web technology, increases the capability in terms of holistic knowledge building and re-use via interoperability. Last but not least, the framework is designed to constantly evolve in the next future, for instance by incorporating more advanced AI-powered features.

Plastic waste management has become a major problem in the present times, and many countries are struggling to deal with it. The situation has become a crisis in developing nations due to a lack of proper waste management, resources, technology, and political will. The extensive usage of foam-based packaging materials such as Styrofoam as a secondary packaging material has led to environmental pollution both in land and water, in developing countries. It is important to address this problem using a sustainable approach such as biomimetic manufacturing. One such solution that is present in developed nations is mycelium-based packaging, wherein the agricultural and industrial-based cellulose waste is converted into a biocomposite with the help of a fungi root network. Such a process has the potential to convert biomass into useful products but also has an indirect effect on pollution reduction by eliminating stubble burning in nations like India. In this review, we examine the details of the manufacturing process, properties, advantages, and limitations of such composite materials. A comparison of the present status of such materials produced in the market by some of the companies across the world is presented. Finally, the challenges involved with such materials and the future directions are discussed.

An electrocardiograph (ECG) reflects the health of the human heart and is used to help diagnose arrhythmia and myocardial infarction(MI) in clinical practice. Early diagnosis of arrhythmia helps implement preventive measures and plays a crucial role in saving a patient's life. With the increasing demand of clinicians for ECG analysis technology, intelligent detection and diagnosis of ECG signals has become a more efficient means to assist physicians in diagnosing cardiovascular diseases. This paper introduces an ECG diagnosis approach based on an ensemble deep learning combination of CNN(convolutional neural network) and SLAP(stacked-long short term memory architecture for prediction) architecture. ECG data is denoised and further divided into single heartbeats to achieve data standardization and sample diversity. Adam optimizer and BCEwithlogitsloss multi-classification loss function were used to enhance the model effect, and the system achieved the classification effect of 99.3% average accuracy, 99.0% F1-value, and 99.2% sensitivity in MIT-BIH standard database classification. It also shows good generalization ability on the Tianchi data set.

Innovative practices in irrigation systems can bring improvements in terms of economic efficiency and in the same time can reduce environmental impact. Investment in high tech technologies frequently involves additional costs, but an efficient water management can increase the lifetime of the equipment. The main objective of this article is to reduce the energy consumption by one thousand cubic meters pumped and automatically to increase the economic efficiency of the pumping groups. This paper develops a new operating algorithm that ensures the operation of the pumping group at safe operating intervals and in the same time identifies the equivalent pump operating points for the entire flow range and pumping height of the pumping group. This methodology is based on the principles of an Expert System to perform the optimization process of the energy consumption in pumping groups. The resulting methodology avoids the combinatorial explosion of the solutions to be analyzed and determines the point of maximum efficiency without violation of any of the system constraints under any operating condition. The proposed methodology is tested on an irrigation system that includes a pumping group with 5 pumps, showing its effectiveness in obtaining the optimal solution with a relatively low computational burden.

This manuscript proposes a novel tangent-graph-based method that provides all distinctive topology paths, as a set of trajectories that can not be transformed into each other by gradual bending and stretching without colliding with obstacles. As the global optimal trajectory (limited by dynamic constraints) may not correspond to the shortest path (almost without dynamic constraints), it is important to provide all distinctive topology paths rather than just the globally shortest one. One of the application is provide initial paths for trajectory planning methods, such as time elastic band (TEB) and dynamic window approach (DWA). Considering that a mobile platform is always working in a dynamic changing environment and that update the whole graph is time consuming, a dynamic rectify method is proposed to update tangents according to local map provided by sensor reading. Finally, results under real grid maps are presented.

Glyphosate (G)-based herbicidal formulations, such as the most commonly used one, Roundup (R), are major pesticides used worldwide on food and feed. Pregnant women may thus be frequently exposed to R compounds. These are composed of G, which is declared as the active principle, and other products contained in formulations, named formulants, which have been declared as inerts and diluents by the manufacturers. These formulants have, in fact, been demonstrated to be much more toxic than G, in particular to placental and embryonic human cells. In this work, we thus compared the effect of G and R, using placental perfusion ex vivo. R, but not G alone, was demonstrated to alter the placental permeability of a known small model molecule, antipyrine. Similar results were observed for the fetal venous flow rate. The transfer of G alone increases with time, but is significantly decreased in presence of its formulants. The perfusion of R provokes a destruction of fetal vessels, as demonstrated by immunohistochemistry. Formulants obviously alter the fetal-placental circulation and placental integrity according to time of exposure. Therefore, G does not appear to be the main toxic agent of R. Formulants, although undeclared, include polyoxyethanolamines, PAHs, or heavy metals, and may be responsible for this toxicity. These compounds are also present in other pesticides. The progressive blood flow reduction due to the toxic compounds of formulations may diminish the nutrient supply to the fetus, alter the development, and may enhance the poisoning effects. Although these are preliminary results, they could at least partially explain some adverse pregnancy outcomes in mothers exposed to pesticides or other environmental pollutants. The debate on glyphosate alone is proven insufficient for the understanding of the toxicity.

Nature-based Solutions (NbS) have rapidly been gaining traction across the research, policy, and practice spheres, touted as transformative actions to jointly address biodiversity loss and climate change. However, there are multiple, alternative ways to imagine NbS in those three spheres. To inform the NbS discourses across these three spheres, we critically reflect on the prevailing framing of NbS and consider the potential of a different framing of NbS to support transformations towards regenerative relationships between humans and nature. Such reflection is urgently needed to ensure that research, policy, and practice delivers on the transformative ambitions of NbS. We propose a novel “core framing” of NbS, charting two pathways for how such a framing can support a human value-based transformation – first through influencing individual beliefs and values, and second through the communication and application of the NbS concept in research, policy, and practice. We argue that for NbS to support transformation, it must support a reframing of human-nature relationships, one where the interdependencies between people and nature are recognized as essential for social and environmental well-being. We elaborate on how such a framing is key to support inclusivity and collaboration between diverse research perspectives, policy objectives across scales, and implementation practices, to deliver successful NbS.

(1) Background: A global pandemic due to COVID-19 emerged in November 2019 and hit France in early March 2020. It not only resulted in a loss of lives but also in very strict confinement measures. The objective of this study was to understand what the determinants of the change in participants’ behavior and mental state were during the confinement. (2) Methods: An online survey was launched on April 23rd, 2020, and closed on May 7th, 2020. The final sample included 1454 participants from 24 to 65 years old. Descriptive and multivariate analyses were then performed. (3) Results: 28.7% reported having a more balanced diet, against 17.1% with a less balanced diet. 22.7% of respondents reported an increased alcohol consumption, as opposed to only 12.2% declaring a decrease and 11.2% of respondents increased their tobacco consumption, while 6.3% decreased it. 50.6% of the participants reported being more depressed, stressed, or irritable since the beginning of the lockdown. Confinement had a negative effect on every behavior studied in this survey, except for nutrition. We also found that negative mental state changes were strongly associated with nutrition, sleep, physical activity, and alcohol consumption changes.

The main purpose of this research is to use “DMAIC” and “DMADV” framework of six sigma to reduce cost of projects, increase yields, improve performance and reduce defects. This study conclude that the sigma level of cement bag production in four production lines is “4.7 DPMO” values of 710 and the possibility of defects per unit of 11 possibilities this situation was handled by using six sigma. Any business or industry run only to satisfy customer and increase their profits, this can be attained as development of quality product..For the ranking of newly established universities the certification of those institutes is very important and also a critical process. For this process we used Lean six sigma approach that can identify the wastes that affect this process.Six sigma can be applied to any work field such as education, power optimization and other types of industries Six sigma “DMAIC” approach is also used for the testing of EDA tools that occurs due to the complex coding or configurations, flows and platforms they support. To improve the process quality of SDLC it’s necessary to remove the defects of system in advance along with thorough valuation of size and it also makes project accordant with real time environment

Radio Frequency Identification (RFID) devices use radio waves to relay identifying information to an electronic reader using low-cost RFID Tag. RFID is expected to replace the conventional bar-code identification system due to its advantage like real-time recognition of a considerable number of objects. However, in RFID systems an attacker can get the tag that may lead to various security threats, and the limited computation power of RFID tags can cause delay. Lightweight authentication protocols proposed using cryptographic algorithms (one-way hash function, symmetric key encryption/decryption, and exclusive-OR) in order to cope with these problems. One such lightweight cryptographic protocol has been presented by Gope and Hwang using RFID systems. However, it analyzed in this article that their protocol is infeasible and vulnerable to Collision Attack, Denial-of-service (DoS), and Stolen verifier Attacks. A realistic, lightweight authentication protocol has been presented in this article to ensure protection against the mentioned attacks for IoT based RFID system. The proposed protocol has been formally analyzed using BAN logic and ProVerif as well as also analyzed informally using security requirement. The results show that the proposed protocol outperforms the existing protocols not only in security enhancements but also in terms of computation and communication complexity. Furthermore, the proposed protocol has also been analyzed for storage complexity.

An ethanol vapor sensor based on a microfiber with quantum-dots (QDs) gel coating is proposed and demonstrated. The QDs gel was made from UV glue as the gel matrix and the CdSe/ZnS QDs with a concentration of 1mg/mL. The drawing and coating process were conducted by using a simple and low-cost home-made system. The bending, ethanol sensing, temperature response and time response tests were carried out, alternatively. The experimental results show that the fabricated sensor has a high sensitivity of -3.3%/ppm, a really low temperature cross-sensitivity of 0.17 ppm/℃ and a fast response time of 1.1s. The robust structure with ease of fabrication and excellent sensing performance render it a promising platform for real ethanol sensing application.

Service robots operating in indoor environments should recognize dynamic changes from sensors, such as RGB-D camera, and recall the past context. Therefore, we propose a context query-processing framework, comprising spatio-temporal robotic context query language (ST-RCQL) and spatio-temporal robotic context query-processing system (ST-RCQP), for service robots. We designed them based on the spatio-temporal context ontology. ST-RCQL can query not only the current context knowledge but also the past. In addition, ST-RCQL includes a variety of time operators and time constants, and thus queries can be written very efficiently. The ST-RCQP is a query-processing system equipped with a perception handler, working memory, and backward reasoner for real-time query-processing. Moreover, ST-RCQP accelerates query-processing speed by building a spatio-temporal index in the working memory, where percepts are stored. Through various qualitative and quantitative experiments, we demonstrate the high efficiency and performance of the proposed context query-processing framework.

Academic publishing appears to be the most important key of the academic functions (academic research, excellence in teaching and learning and community services). Selecting the right journal to publish research results is a challenge to academics. Yet, there is inadequate knowledge about a model specifically directed at the topic of the journal selection process with a mathematical certainty. The objectives of this research are: to identify the main factors that an author or researchers consider when selecting an academic journal for submitting a manuscript, and, to develop a mathematical algorithm of journal selection that provide the best journal choice with a mathematical certainty based on difficulty of each factor. Quantitative research through questionnaires has been applied as an appropriate instrument base to address the researcher’s identification of the factors that should be considered when selecting a journal. Questionnaire developed and emailed to academics in 31 public and private universities in the developing countries. Academics reported that the most important publication difficulty factors were publishing in reputable journals, and publishing in a journal that has an impact factor. However, the most least publication difficulty factors were found to be: number of issues per year and if the journal is an open access. The proposed mathematical algorithm of journal’s publication difficulty factors was developed and tested.

We develop and apply a systematic literature review methodology to identify and characterize the ways in which the peer-reviewed literature depicts how climate change adaptation is occurring in Australia. We reviewed the peer-reviewed, English-language literature between January 2005 and January 2018 for examples of documented adaptation actions. Our results challenge previous assumptions that adaptation action is not happening in Australia and describes adaptation processes that are underway. For the most part, actions can be described as preliminary or groundwork, with a particular focus on documenting stakeholder perspectives on climate change and adaptation, and modelling or scenario planning in the coastal zone, agriculture and health sectors. Where concrete adaptations are reported, they are usually in the agricultural sector and are most common in the Murray-Darling Basin, Australia’s food basket. The findings of the review advance our understanding of adaptation to climate change as a process and the need to consider different stages in the process when tracking adaptation.

In the manufacturing industry, cutting tool failure is a probable fault which causes damage to the cutting tools, workpiece quality and unscheduled downtime. It is very important to develop a reliable and inexpensive intelligent tool wear monitoring system for use in cutting processes. A successful monitoring system can effectively maintain machine tools, cutting tool and workpiece. In the present study, the tool condition monitoring system has been developed for Die steel (H13) milling process. Effective design of experiment and robust data acquisition system ensured the machining forces impact in the milling operation. Also, ANFIS based model has been developed based on cutting force-tool wear relationship in this research which has been implemented in the tool wear monitoring system. Prediction model shows that the developed system is accurate enough to perform an online tool wear monitoring system in the milling process.