(1) Background: The rapid development of information technology has changed the traditional concept of space, gradually shifting the "container space" to the "relational space" . The constraints of geographical spatial elements are diminishing, and the theory of virtual agglomeration is gaining attention. (2) Methods: In this study, we constructed an evaluation system for virtual agglomeration, comprising four primary indicators: virtual infrastructure level, virtual output level, virtual input level, and virtual service level. The TOPSIS method was used to calculate the virtual agglomeration level for each province, and the DEA-Malmquist method was employed to measure provincial total factor productivity (TFP) in China. Using panel data from 30 provincial regions in China from 2013 to 2021, we examined the mechanism and impact path of virtual agglomeration on TFP. (3) Result: There is an inverted U-shaped relationship between virtual agglomeration and TFP in China. The overall development level of virtual agglomeration is relatively low, within the range where the marginal effect of virtual agglomeration on TFP is positive but diminishing, indicating significant potential for further development. The impact of virtual agglomeration on TFP is stronger in the Yangtze River Economic Belt compared to non-Yangtze River areas, and the highest stable point of TFP is higher in central provinces than in eastern and western provinces. (4) Conclusions: This study provides a theoretical basis and practical reference for improving the level of virtual agglomeration.

Falls are considered a significant cause of disability, pain, and premature deaths in older adults, often due to sedentary lifestyles and various risk factors. Combining immersive virtual reality (IVR) with physical exercise, or exergames, enhances motivation and personalizes training, effectively preventing falls by improving strength and balance in older people. IVR technology may increase the ecological validity of the assessments. The main goal of our study was to assess the feasibility of using a KAVE-based VR platform combining simulations of Levadas and a Cable Car to perform a balanced assessment and profiling of the older adult population for high risk-of-falls and the related user experience. A VR-based platform using a Wii balance board and a CAVE was developed to assess balance and physical fitness. Validated by the Biodex Balance System (BBS), 25 older adults participated in this study. The usability and presence were measured through the System Usability Scale and ITC-SOPI questionnaires, respectively. The IVR system showed a high presence and a good usability score of 75. Significant effects were found in the maximum excursion of the Centre of Pressure (COP) on the anterior-posterior axis during the Cable Car Simulation (CCS), correlating with BBS metrics. Multiple discriminative analysis models and the support vector machine classified fall risk with moderate to high accuracy, precision, and recall. The system accurately identified all high-risk participants using the Leave-One-Out method. This study suggests that an IVR-based platform based on simulations with high ecological validity can be used to assess physical fitness and identify individuals at a higher risk of falls.

Developing and utilising of underground space is an vital direction for urban growth. Underground commercial streets, as a significant component of underground space accommodating extensive human social activities, and consequently necessitate the creation of human-scale spaces. In the evolution of urban design development towards greater refinement, applying architectural theories and excessively subjective designs has resulted in a deficiency of human-centered design and a disordered spatial environment. This study merges environmental psychology and architectural theory to determine the appropriate length of spatial scale. Two experiments focusing on spatial perception evaluation were conducted using a virtual experimental platform that featured varying dimensions of spatial scale combinations. These quantified combinations were correlated with perception evaluation, and regression analysis was employed to identify appropriate scale ranges, which were superimposed on the range of length selection. Finally, the optimal length and scale combination for underground commercial street spaces were established, providing a reference for the human-centered design of these environments.

Avatar therapy (AT) is a novel virtual reality-based psychotherapy that has been developed to treat auditory verbal hallucinations (AVH) in treatment-resistant schizophrenia patients. Various psychotherapeutic components, such as emotions and sense of presence, could contribute to clinical outcomes. However, the interplay between sense of presence, emotions and clinical response has seldom been investigated. This study aimed to explore the relations between sense of presence, emotions, and clinical outcomes in AT. To conduct this investigation, data from previous and ongoing AT trials were used. Sense of presence and emotions were assessed using standardized questionnaires. AVH were evaluated using the Psychotic Symptom Rating Scales. While sense of presence was positively associated with positive emotions such as control and serenity, no significant associations were found for negative emotions. Moreover, a higher level of sense of presence was associated with a bigger decrease in AVH. Overall, positive emotions seem to be associated with sense of presence in AT. Sense of presence also seems to be involved in the therapeutic outcome, thereby suggesting that this could be an important component related to clinical response. More studies are needed to confirm these trends, which could be generalized to other virtual reality-based psychotherapies.

When wildlife and motor vehicles collide, the result for the animals is often death (roadkill). A commercial roadkill Virtual Fence (VF) mitigation device (iPTE Traffic Solutions) was used in a field trial to test its effectiveness along a 4.9-km segment of road on Bruny Island, Tasmania. A total of 585 days of monitoring of roadkill by species was conducted, with six sections alternatively switched on or off, according to a variation of a Crossover and Multiple Before-After-Control-Impact (MBACI) experimental designs that divided monitoring into “off-on” then “on-off” blocks of periods with each “on” period followed by a 16 d “wash-out” period. For the six sections over the four periods that exclude wash-outs, the 24 aggregated values of daily counts of roadkill of Tasmanian pademelons (Thylogale billardierii), that gave a total count of 222, were modelled. Other species were killed in insufficient numbers for analysis to be informative. The statistical analysis exploited the MBACI design to estimate the VF effect using a log-odds ratio parameter (LORP) while accounting for local spatio-temporal effects. Both versions of the analysis, either averaging over the three spatial replicates (paired sections) or two temporal replicates (blocks) gave no statistically significant effect of the VF judged as a LORP estimate not sufficiently below zero. Corresponding percentage reduction estimates of 9% and 16% were derived from the LORP estimates and given parameter uncertainty estimates the power to detect as significant a LORP corresponding to a 50% reduction in rate were 0.5 and 0.6, respectively. This study confirms results from a similar field trial carried out in 2018 also in southern Tasmania and adds to the evidence that this VF is likely to give if anything only a minor reduction in roadkill for a commonly killed species for which researchers have the best chance of detecting any practically useful reduction.

1) Background: When women receive a diagnosis of a gynecologic malignancy, they can have questions about their diagnosis or treatment that can result in voice queries to virtual assistants. Recent advancement in artificial intelligence (AI) has transformed the landscape of medical information accessibility. The Google virtual assistant (VA) outperformed Siri, Alexa, and Cortana in voice queries presented prior to the explosive implementation of AI in early 2023. The efforts presented here focus on determining if advances in AI in the last 12 months improved the accuracy of Google VA responses related to gynecologic oncology. (2) Methods: Previous questions were utilized to form a common basis for queries prior to 2023 and responses in 2024. Correct answers were obtained from the UpToDate medical resource. Responses related to gynecologic oncology were obtained using Google VA, as well as the generative AI chatbots Google Bard/Gemini and Microsoft Bing-Copilot. (3) Results: The AI narrative responses varied in length and positioning of answers within the response. Google Bard/Gemini achieved an 87.5% accuracy rate, while Microsoft Bing-Copilot reached 83.3%. In contrast, the Google VA’s accuracy in audible responses improved from 18% prior to 2023 to 63% in 2024. (4) Conclusion: While the accuracy of the Google VA has improved in the last year, it underperformed Google Bard/Gemini and Microsoft Bing-Copilot so that there is considerable room for further improved accuracy.

Background: Virtual care adoption accelerated during the COVID-19 pandemic, highlighting the need for healthcare professionals to develop relevant competencies. However, limited evidence exists on the core competencies required for quality virtual care delivery. Objective: This study aimed to identify the critical competencies physicians, nurses, and other health professionals need for adequate virtual care provision in Saudi Arabia using a Delphi method. Methods: A 3-round Delphi technique was applied with a panel of 42 experts, including policymakers, healthcare professionals, academicians, and telehealth specialists. In round 1, an open-ended questionnaire elicited competencies needed for virtual care. Competencies were distilled and rated for importance in rounds 2 and 3 until consensus was achieved. Results: Consensus emerged on 151 competencies across 33 domains. The most prominent domains were communication (15 competencies), professionalism (13), leadership (12), health informatics (5), digital literacy (5) and clinical expertise (11).

Digital twin, an innovative technology propelled by data and models, plays a seminal role in the digital transformation and intelligent upgrade of ships. This study introduces a digital twin methodology for real-time monitoring of ship structure deformation fields, based on finite discrete strain data, and a visualization tool framework is developed using virtual reality technology. First, the inverse Finite Element Method (iFEM) is employed to derive the deformation field of the ship structure in real time via sensor strain data. Secondly, the deformation field data obtained based on the iFEM algorithm is converted into general visualization data conducive to interpretation within VR applications. Lastly, a digital twin software tool is built to enable synchronous response and interaction between the virtual scene and the physical scene, directly superposing particular virtual objects (data acquired by sensors, CAD virtual models, and deformation field cloud images) onto the physical scene in real-time. The digital twin tool embodies a virtual reality visualization system framework integrating physical data measurement, reconstruction, analysis, expression, storage, rendering and interaction of deformation field data. Through practical application, the flexibility, effectiveness and compatibility of the developed prototype tool are verified. According to the results, the system can enhance the efficiency of scientific communication, model validation, and interdisciplinary sharing during the analysis and evaluation of mechanical properties of ship structures.

The International Maritime Organization (IMO) is enforcing increasingly stringent regulations on ship carbon emissions, The International Maritime Organization (IMO) has been implementing progressively strict regulations on ship carbon emissions, leading to the adoption of the virtual arrival (VA) method by many vessels to reduce their carbon footprint. However, the effectiveness of the traditional VA method often varies in busy ports with complex traffic organization scenarios. To address this, our study presents a novel, comprehensive model that integrates vessel scheduling with the VA approach. This model is designed to achieve a dual objective: reducing carbon emissions through Virtual Arrival and simultaneously minimizing vessel waiting times. In addition to these goals, it incorporates essential aspects of safety, efficiency, and fairness in port management, utilizing the NSGA-2 algorithm to find optimal solutions. This model has been tested and validated through a case study at Ningbo-Zhoushan port, employing its dataset. The results demonstrate that our innovative model and algorithm significantly outperform traditional scheduling methods, such as First-Come-First-Serve (FCFS) and Virtual-Arrival Last-Serve (VALS), particularly in terms of operational efficiency and reduction in vessel carbon emissions.

Smart grid capabilities have grown significantly in recent years. The smart grid provides advanced real-time handling of faults, advanced automatic control for efficient electricity transmission, monitoring and collection of the electrical system's capacity, and communication for information sharing. Unfortunately, its exposure to public networks makes it increasingly vulnerable to privacy breaches, vulnerabilities, and cyber-attacks. Cyber security threats and vulnerabilities in smart grid networks have become a primary concern that needs to be addressed before deploying a smart grid. Furthermore, the wide range of protocols increases the attack surface of a smart grid. This study focuses on the vulnerability of Modbus, which is regarded as one of the most prevalent protocols in smart grid communication networks. This paper presents preliminary findings of analyzing cyber-attacks against the Modbus protocol using a virtual testbed to investigate its effects on the smart grid network protocol. The concept incorporates an emulated Modbus/TCP network environment built from open-source software components that imitate fundamental industrial control features of the smart grid. Finally, we analyze the cycle of a cyber-attack leading through Reconnaissance to a DoS attack on the Modbus/TCP protocol and propose improvements to the test bed for protocol attack detection and mitigation.

Gastric cancer (GC) is a highly heterogeneous, complex disease and the fifth most common cancer worldwide (about one million cases and 784 000 deaths worldwide in 2018). CG is lately diagnosed and guarantees a poor prognosis for GC (the 5-year survival rate is less than 20%, but in early detection can reach 90%). This study evaluated the transcriptional profile in tumor gastric samples to find genes highly expressed during tumor establishment and use the related proteins as targets to find new anticancer molecules. Data was collected at Gene Expression Omnibus (GEO) bank to obtain 3 dataset matrices that analyze gastric tumor tissue versus normal gastric tissue, performed microarray using GPL570 platform, and from different sources. The genes found in silico analysis were confirmed in several lines of GC cells by RT-qPCR. The protein data bank was used to find the correspondent proteins. Then a structural-based virtual screening was done to find molecules, and docking analysis was done using the DockThor server. Our results of transcriptomic analysis, together with RT-qPCR, confirm the high expression of the genes AJUBA, FBXL13, CCDC69, CD80 and NOLC1 in GC lines. Based on that, the correspondent proteins were used in SBVS analysis. Five molecules, one each target, MCULE-2386589557-0-6, MCULE-7343047040-0-1, MCULE-5230409338-0-3, MCULE-9178344200-0-1 and MCULE -5881513100-0-29. All molecules have favorable pharmacokinetic, pharmacodynamic and toxicological properties. Molecular docking analysis revealed that the molecules interact with proteins in critical sites for their activity. Using a virtual screening approach, a molecular docking study was performed for proteins encoded by genes that play important roles in cellular functions for carcinogenesis. Combining a systematic collection of public microarray data with a comparative meta-profiling, RT-qPCR, SBVS, and molecular docking analysis provided a suitable approach to find genes involved in GC and work the correspondent protein to strive for new molecules with anticancer properties.

Mild cognitive impairment (MCI) is when brain function declines. It is a transition stage between normal aging and Alzheimer's disease (AD) and may be an underlying symptom of AD. Improper use of test instruments or imperfect test methods in clinical practice often leads to variations in test results. In addition, there may be resistance from the subject if he/she has to undergo multiple screening tests simultaneously. Therefore, the objective of this study was to use virtual reality to create an image testing scenario that integrates Mini-Cog, Short Portable Mental Status Questionnaire (SPMSQ), Mini-mental Status Examination (MMSE), Saint Louis University Mental Status Examination (SLUMS), Clinical Dementia Rating (CDR), and Cognitive Abilities Screening Instrument (CASI), and combine fuzzy logic control (FLC) technology to develop an MCI forecasting system. There were 24 middle-aged to older adults aged 50 to 65 years who participated in the evaluation experiment. The results showed that the MCI forecasting system developed in this study is highly correlated with the traditional screening tests, including Mini-Cog, SPMSQ, MMSE, SLUMS, and CASI. The forecasting system can provide an integrated reference score for testers in making judgments. In addition, the distribution of the System Usability Scale (SUS) evaluation scores for the MCI forecasting system revealed that 87.5% were grade C (good to use) or above, and 29.2% were grade B (extremely good to use) or above. The forecasting system receives positive feedback from the subjects.

The emergence of Digital Twin (DT) technology is creating unique opportunities for human so-ciety in terms of real-time data transfer from the physical environment to its digital replica. DT technology has two-way interaction capabilities that enable data exchange between physical and virtual environments, creating bidirectional data flows. Progress has been made in different in-dustry sectors, but the Architecture, Engineering, Construction, and Operation (AECO) sector still requires further development. Recent studies have shown the potential for DT-based platform implementation in the lifecycle management of buildings and infrastructure. This paper examines the development and implementation of DT technology in the construction sector, identifying key definitions, enablers and use cases, while comparing its use with other industries and evaluating benefits and future potential.

This paper investigates the physical/virtual dynamics when constructing an immersive environ-ment for medieval courtyard houses in Historic Cairo. Using a VR Lab at a university campus, the paper analyzes a courtyard that symbolizes social resilience and community bonding at the newly rehabilitated Bayt Yakan. The courtyard is reconstructed as a Mixed Object through 3D documentation and scanning the space to develop a photogrammetry and VR experience. The results show that the sense of presence is perceived through a combination of factors and juxta-positions of the real and the virtual including: 1) architectural aesthetics, 2) intangible elements and 3) socio-cultural activities in space. Based on the pilot case study, the paper concludes with proposing a “Geospatial Framework for Immersive Environments and Social Sustainability” that is transdisciplinary, pluralistic and expansive in nature to encompass the multiple narratives of the contested past, and overlay the material and immaterial sustainable features embedded in historical contexts, where the Mixed Reality paradigm becomes an enabler for multiple voices, tools and mediums.

This paper presents a modular approach to generic exergame design that combines custom physical exercises in a meaningful and motivating story. This aims to provide a tool that can be individually tailored and adapted to people with different needs, making it applicable to different diseases and states of disease. The game is based on motion capturing and integrates four example exercises that can be configured via our therapeutic web platform "Blexer-med". To prove the feasibility for a wide range of different users, evaluation tests were performed on 14 patients with various types and degrees of neuromuscular disorders, classified into three groups based on strength and autonomy. Users were free to choose their schedule and frequency. Game scores and three surveys (before, during, and after the intervention) showed similar experiences for all groups, with the most vulnerable having the most fun and satisfaction. The players were motivated by the story and by achieving high scores. The average usage time was 2.5 times per week, 20 minutes per session. Pure exercise time was about half the game time. The concept has proven feasible and forms a reasonable basis for further developments. The full 3D exercise needs further fine-tuning to enhance fun and motivation.

The eugenol derivative, ethyl 4-(2-methoxy-4-(oxiran-2-ylmethyl)phenoxy)butanoate 1, with promising insecticidal capability was encapsulated in liposomal formulations of egg-phosphatidylcholine/cholesterol (Egg-PC:Ch) 70:30 and of 100% dioleoylphosphatidylglycerol (DOPG). Compound-loaded Egg-PC:Ch liposomes exhibit small hydrodynamic diameters (below 100 nm), high encapsulation efficiency (88.8% ± 2.7%), higher stability and a more efficient compound release, being chosen for assays in Sf9 insect cells. Compound 1 elicited a loss of cell viability up to 80% after 72h of incubation. Relevantly, encapsulation maintained the toxicity of compound 1 towards insect cells, while it lowered toxicity towards human cells, thus showing the selectivity of the system. Structure based inverted virtual screening was used to predict the most likely targets and molecular dynamics simulations and free energy calculations were used to demonstrate that this molecule can form a stable complex with insect odorant binding proteins and/or acetylcholinesterase.

Previous research has either neglected to consider misbehaviour or misconduct in the virtual workplace during the current COVID-19 pandemic or highlighted some challenges encountered with remote working or work from home but in isolation, e.g., misbehaviours or ethical concerns associated with improper use of technology when accessing clients’ confidential information, without understanding their aetiology and context in a holistic manner. This has impacted the ability of existing research in providing recommendations organisations can practically implement to improve the sustainability and productivity of the virtual workplace, especially as they seek to navigate the current pandemic and prepare for the global business environment in the next decade. Instead, this study, for the first time, proposes a novel holistic methodology to identify the aetiologies of ethical and performance challenges with focus to the Information Technology consulting sector, as well as developing a set of recommendations companies can adopt to manage such behavioural and productivity challenges. Thus, this study illustrates the key issues associated with remote working implemented to respond to the current COVID-19 pandemic, which mine not only the individual performance in an organisation but also its overall productivity, as well as suggests the main performance and reward management strategies that can be leveraged to mitigate them. Tailored strategies are described and discussed as referred to this industry to help in navigating a more unstable yet competitive market to manage the virtual employees’ misbehaviours in the workplace and drive growth for individuals and organisations alike.

Nowadays, information security is a challenge especially when transmitted or shared in public clouds. Many of researchers have been proposed technique which fails to provide data integrity, security, authentication and another issue related to sensitivity data. The most common techniques were used to protect data during transmission on public cloud are cryptography, steganography, and compression. The proposed scheme suggests an entirely new approach for data security on public cloud. Authors have suggested an entirely new approach that completely makes secret data invisible behind carrier object and it is not been detected with the image performance parameters like PSNR, MSE, entropy and others. The details of results are explain in result section of paper. Proposed technique have better outcome than any other existing technique as a security mechanism on a public cloud. Primary focus of suggested approach is to minimize integrity loss of public storage data due to unrestricted access rights by uses. To improve reusability of carrier even after data concealed is really a challenging task and achieved through suggested approach.

The efficacy of the product development process is measured by the ability to launch a project with product and production process specifications that could guarantee that the manufacturing can produce it with the least impact. If a problem is detected late, they bring consequences beyond the high cost of the solution, if related to physical ergonomics, which will influence the well-being of operators, productivity, and quality. Virtual Reality (VR) and Digital Human Modeling (DHM) are ones of the enabling technologies of Industry 4.0 and has already been applied on a large scale in industries such as automotive, construction, and aeronautics. However, even though the huge applications, these technologies are not yet applied by these industries for the analysis of physical ergonomics during product development phases. This study aims to characterize the state of the art and technology about the application of Virtual Reality and Digital Human Modeling for the physical ergonomics analysis in the during product development phases in the industry through a systematic review of the literature and patents. In patent documents recovery, we used Derwent Innovation database. The research is based on searching the selected terms in the title, summary, and claims of the documents through a search strategy containing IPC code and keywords. In articles recovery, we searched ScienceDirect, Springer, and IEEExplore databases for scientific publications. The search resulted in 311 patents documents and 16 articles in the scientific database. This study analyzed the patents to map out the technological progress in this area, where we found in the charts and data an increasing number of publications per year and a spread application with a considerable number of new technologies presented in these recent patents. The literature review indicated that Virtual Reality technology complements the Digital Human Modeling during physical ergonomics analysis for manufacturing process already designed. The majority of research on the use of VR and DHM technologies for physical ergonomics analysis focus on the automotive industry and the ergonomic assessment of workstations and current processes. Further research is needed to investigate how Virtual Reality and Digital Human Modeling might assist in the understanding of physical ergonomics in certain tasks throughout the product development process, such as the simulation of worker posture or effort when assembling parts.

This article argues that despite a citation review is a rarely used research tool, this can be very useful to assess the impact of new research topics, both from the future research direction and the bibliometric perspectives. An explorative study is presented around the research area marked as Industry 4.0 with the conference paper mentioned in the title of this citation review. Even though the given reference paper is relatively recent, there are already twenty-seven citations listed among three different scholar databases. These are Google Scholar, ResearchGate and Semantic Scholar. In light of this, the article provides a bibliometric confirmation and analysis for the progression of the line of research adopted by de Giorgio et al. in the exploration of non-traditional methods using virtual reality technology and human-robot collaboration for adaptive applications in Industry 4.0. Furthermore, it represents a model for the authors’ self-development and an example of an unconventional approach to scientific work that may help improve related bibliometric research and scholar database strategies to index new articles and topics in the future.

A novel coronavirus (SARS-CoV-2) that is initially found to trigger human severe respiratory illness in Wuhan City of China in 2019, has killed 2,718 people in China by February 26, 2020, and which has been recognized as a public health emergency of international concern as well. And the virus has spread to more than 38 countries around the world. However, the drug has not yet been officially licensed or approved to treat SARS-Cov-2 infection. NSP12-NSP7-NSP8 complex of SARS-CoV-2, essential for viral replication and transcription, is generally regarded as a potential target to fight against the virus. According to the NSP12-NSP7-NSP8 complex (PDB ID: 6NUR) structure of SARS, two homologous models were established for virtual screening in the present study, namely NSP12-NSP7 interface model and NSP12-NSP8 interface model. Seven compounds (Saquinavir, Tipranavir, Lonafarnib, Tegobuvir, Olysio, Filibuvir, and Cepharanthine) were selected for binding free energy calculations based on virtual screening and docking scores. All seven compounds can combine well with NSP12-NSP7-NSP8 in the homologous model, providing drug candidates for the treatment and prevention of SARS-CoV-2.

Although proposition of “Virtual Reality” (VR) and “Augment Reality” (AR) can be traced back to the 60s, both areas are actually blooming in recent decades. Thanks to the latest deep learning techniques, an enormous advance in computer vision research community has taken place. Since VR and AR are highly related to computer vision tasks, these areas have enjoyed the benefits as well. Yet there is no sufficient survey on such impact and new research areas arising from it. This paper mainly focuses on the latest research progress in ACM Symposium on Eye Tracking Research & Applications (ETRA) 2019, as well as several recent representative paper works. It aims to figure out the influence of deep learning techniques on latest VR/AR research. Meanwhile, new issues have popped up with the development of VR and AR technology, such as privacy and computation efficiency. This paper draws attention to such newly produced topics as well. In addition, this paper also investigates on the effect of latest VR and AR techniques on people, such as level of teamwork in collaborative tasks, assistance and treatment to patients and the disabled, etc.

G protein-coupled receptor 15 (GPR15, also known as BOB) is an extensively studied orphan GPCR involving HIV infection, colonic inflammation and smoking-related diseases. Recently, GPR15 was deorphanized and its corresponding natural ligand demonstrated an ability of inhibiting cancer cell growth. However, no study reported the potential role of GPR15 in a pan-cancer manner. Using large-scale publicly available data from the Cancer Genome Atlas (TCGA) and the Genotype-Tissue Expression (GTEx) databases, we found that GPR15 expression is significantly lower in colon adenocarcinoma (COAD) than in normal tissues. And among 33 cancer types, GPR15 expression is significantly correlated with the prognoses of COAD, neck squamous carcinoma (HNSC), lung adenocarcinoma (LUAD) positively and stomach adenocarcinoma (STAD) negatively. This study also revealed that commonly upregulated gene set in the high GPR15 expression group (stratified via median) of COAD, HNSC, LUAD and STAD are enriched in immune systems, indicating that GPR15 might be considered as a potential target for cancer immunotherapy. Furthermore, we modelled the 3D structure of GPR15 and conducted the structure-based virtual screening. The top 8 hits compounds were screened and then subjected to molecular dynamics (MD) simulation for stability analysis. Our study provided novel insights into the role of GPR15 in a pan-cancer manner and discovered a potential hit compound for GPR15 antagonists.

The Biginelli reaction is a highly versatile reaction, which leads to dihydropyrimidinones/thiones. This scaffold is reported as being a privileged structure due to its ability to interact with biological targets. Synthesis of ethyl 4-(2-fluorophenyl)-6-methyl-2-thioxo-1-(p-tolyl)-1,2,3,4-tetrahydropyrimidine-5-carboxylate was achieved through the Biginelli reaction using a functionalized thiourea. In silico studies demonstrated that the compound title showed good potential for interacting with ecto-5’-nucleotidase, which has been considered as a target in designs for anti-cancer drugs.

The dopamine D3 receptor is an important CNS target for the treatment of a variety of neurological diseases. Selective dopamine D3 receptor antagonists modulate the improvement of psychostimulant addiction and relapse. In this study, five and six featured pharmacophore models of D3R antagonists were generated and evaluated with the post-hoc score combining two survival scores of active and inactive. Among Top 10 models, APRRR215 and AHPRRR104 were chosen based on the coefficient of determination (APRRR215: R2training = 0.80; AHPRRR104: R2training = 0.82) and predictability (APRRR215: Q2test = 0.73, R2predictive = 0.82; AHPRRR104: Q2test = 0.86, R2predictive = 0.74) of their 3D-quantitative structure–activity relationship models. Pharmacophore-based virtual screening of a large compound library from eMolecules (> 3 million compounds) using two optimal models expedited the search process 100-fold speed increase compared to the docking-based screening (HTVS scoring function in Glide) and identified a series of hit compounds having promising novel scaffolds. After the screening, docking scores, as an adjuvant predictor, were added to two fitness scores (from the pharmacophore models) and predicted Ki (from PLSs of the QSAR models) to improve accuracy. Final selection of the most promising hit compounds were also evaluated for CNS-like properties as well as expected D3R antagonism.

In this paper, a method is developed for presenting a novel virtual torque sensor based on precise model and position measurements avoids the need of traditional strain gauges and amplifiers. More specifically, the harmonic drive compliance model and the Gaussian process regression (GPR) technique are used together to achieve virtual torque sensor measurement. While the harmonic drive compliance model provides the analytic part, the Gaussian process regression method is used to reconstruct the unmolded part based on motor-side and link-side joint angles as well as motor current. After an automatic offline calibration, the method allows for a lean online implementation. The virtual torque sensor measurement is compared with measurements of a commercial torque sensor, and the results have attested the effectiveness of the proposed method.

Human influenza A viruses (IAVs) cause global pandemics and epidemics. These viruses evolve rapidly, making current treatment options ineffective. To identify novel modulators of IAV-host interactions, we re-analyzed our recent transcriptomics, metabolomics, proteomics, phosphoproteomics, and genomics/virtual ligand screening data. We identified 713 potential modulators targeting 200 cellular and two viral proteins. Anti-influenza activity for 48 of them has been reported previously, whereas the antiviral efficacy of the remaining 665 is unknown. Studying anti-influenza efficacy, immuno-modulating properties and potential resistance of these compounds or their combinations may lead to the discovery of novel modulators of IAV-host interactions, which might be more effective than the currently available anti-influenza therapeutics.

The following systematic and bibliographic review investigates the intersection between the treatment of cognitive impairments and virtual and augmented reality-based game-oriented applications. The review provides a view into the last 12 years of research. The PubMed Database served as the main source for the review. We defined a comprehensive set of investigation variables and classified three main topics: bibliography, medical, and technical. Of a total of 61 identified articles, 19 were included. The findings from these studies indicate the positive effects of using virtual and augmented reality applications to improve cognitive function and depression. There is also a gap in high-quality evidence since clinical trials have been conducted only with a few patients. Preliminary results indicate positive cognitive and physical well-being effects, but the field demands further investigation to determine the effectiveness. Future research needs to focus on larger studies and the quality of the developed applications. Further, it is important to look at scores like Quality of Living and Satisfaction in Daily Activities to create a functioning environment for the patient.

Background/Objectives: Traditional neurosurgical training involves a steep learning curve. The introduction of advanced simulation technologies, such as virtual reality (VR), provides an alternative method for skill acquisition, allowing for repeated practice and objective assessment. This study focuses on evaluating the learning curve associated with lumbar pedicle Kirschner wire insertion using a virtual fluoroscopic simulator among neurosurgical residents. Methods: Eighteen neurosurgery residents and two interns participated in this study. Participants’ initial skill levels were assessed through a questionnaire. Performance metrics, including insertion accuracy, time, and the number of virtual X-ray scans, were recorded across multiple attempts until a “practical learning plateau” was reached. Statistical analyses were conducted to model learning curves, assess the correlation between pre-training experience and performance. Results: The average number of attempts required to stabilize performance was 5.61. Learning rates varied, with some residents showing rapid improvement while others progressed more slowly. Higher accuracy in wire placement correlated with reduced usage on X-rays over time. However, experienced residents did not necessarily learn faster, indicating potential challenges in adapting to new simulation-based methods. Post-training feedback highlighted the simulator’s utility in increasing confidence and skill levels, although some limitations in anatomical accuracy were noted. Conclusions: This study demonstrates the potential of virtual simulation to enhance neurosurgical training by providing a controlled environment for repeated practice and objective feedback. Simulation-based training can effectively complement traditional methods, though individualized approaches may be necessary to accommodate varying learning rates among residents. Further refinement of simulation tools and their integration into standard training curricula are recommended.

The emergence of drug resistance inducing mutations in Hepatitis C virus (HCV) coupled with genotypic heterogeneity has made targeting NS3/4A serine protease difficult. In this work, we investigated the mutagenic variations in the binding pocket of Genotype 3 (G3) HCV NS3/4A and evaluated ligands for efficacious inhibition. We report mutations at 14 positions within the ligand-binding residues of HCV NS3/4A including H57R and S139P within the catalytic triad. We then modeled each mutational variant for pharmacophore-based virtual screening (PBVS) followed by covalent docking towards identifying a potential covalent inhibitor, i.e. cpd-217. The binding stability of cpd-217 was then supported by molecular dynamic simulation followed by MM/GBSA binding free energy calculation. The free energy decomposition analysis indicated that the resistant mutants alter the HCV NS3/4A-ligand interaction, resulting in an unbalanced energy distribution within the binding site leading to drug resistance. cpd-217 was identified to interact with all NS3/4A G3 variants with significant covalent docking scores. In conclusion, cpd-217 emerges as a potential inhibitor of HCV NS3/4A G3 variants that warrants further in vitro and in vivo studies. The study will pave the way for drug design and development of HCV G3 NS3/4A.

Startups often face uncertainty and the potential Valley of Death. To address these challenges, Sustainable Development Goals (SDGs) can serve as a starting point to identify business opportunities in markets driven by SDG-related issues, which is, in this case, using Virtual Reality (VR) technology as a “painkiller.” This study aims to explore VR use cases and their implications for startup business models and discover a problem-solution fit—defined as the degree to which VR applications effectively address actual problems as “killer applications.” The study employs a customized customer discovery technique, an essential process in the Customer Development methodology. By exploring VR's applicability in various domains such as entertainment, training, education, and tourism, this study unveils compelling use cases that align with SDG aspects, thus validating the hypothesis on startups' potential to harness VR for SDG contributions. Furthermore, the study produces VR business model designs based on solutions to SDG-related problems. Thus, startups can function effectively as “painkillers,” offering solutions that are not only desired but urgently needed (problem-solution fit). The implications of these findings extend globally, underlining VR's role in addressing SDG issues and offering practical insights for startup business model development that are applicable to broader technology adoptions.

In the early stage of new vehicle development, the requirements of maximum performance of the air conditioning (AC) system are obtained through Amesim software simulation, but the calibration control of the AC system is usually carried out in the prototype-build vehicle test stage, and the test time is spanned up to 10 months after spring (autumn), summer and winter, of which up to 2 months are for environment chamber tests. Due to the long calibration cycle of AC control in the road test, which seriously affects the vehicle launch time, virtual calibration technology of air conditioning system is developed to shorten the calibration cycle of AC systems and ensure the quality of vehicles. In the project development stage, the calibration control of the vehicle AC system can be realized to carry out the functional test of the AC system in advance. In that, the grade of maturity for the AC system control can be improved, the on-road calibration test cycle can be shortened, and the development cost can be saved.

In this paper, we propose a method for the generation of simulation test scenarios for autonomous driving. Based on the requirements of standard regulatory test scenarios, we can generate virtual simulation scenarios and functional scenario libraries for autonomous driving, which can be used for simulation verification of different ADAS functions. Firstly, the design operation domain (ODD) of the functional scenario is selected and the weight values of the ODD elements taken are calculated; then a combination test algorithm based on parameter weights is improved to generate autonomous driving virtual simulation test cases for the ODD elements, which can effectively reduce the number of generated test cases compared with the traditional combination test algorithm; then the traffic participant elements under each test case are Then, the values of the subelements under the traffic participant element in each test case are sampled and clustered to obtain hazard specific scenarios. Finally, the specific scenarios are applied to the automatic emergency braking (AEB) system on the model-in-the-loop (MIL) testbed to verify the effectiveness of this scenario generation method.

Under the "dual carbon" target in China, virtual power plants (VPPs) play an important role in improving grid security and promoting clean and low-carbon energy transformation. VPPs can integrate and control distributed resources to participate in the energy market and make full use of distributed resources. However, the intermittency and volatility of renewable energy and the "heat-driven" working mode of CHP units create contradictions that seriously affect the peak-shaving ability of VPPs and lead to high carbon emissions. To solve these problems, this paper aggregates CHP units, wind power, photovoltaics, carbon capture, hydrogen energy storage, and electric boilers into a new type of virtual power plant. The "hydrogen energy storage-electric boiler" joint decoupling CHP working mode is used to strengthen the coupling relationship between electric-thermal-hydrogen load. At the same time, a tiered carbon trading mechanism is considered, with the net profit of the VPP as the optimization objective, balancing economic and environmental considerations. A low-carbon economic dispatch model for VPPs is established, and a genetic algorithm is used for optimization. Three different scheduling strategies are set, and simulations are conducted in three different seasonal scenarios. The results show that the net profit in the cooling season increased by 50.4%, and carbon emissions decreased by 42.3%. In the transitional season, the net profit increased by 39.2%, and carbon emissions decreased by 44.9%. In the heating season, the net profit increased by 19.4%, and carbon emissions decreased by 43.4%. Overall, the proposed dispatch strategy can improve the new energy consumption capacity and total revenue of VPPs while achieving the goal of reducing carbon emissions.

Virtual Reality (VR) technology in education has the potential to revolutionize the Indian school education system. This research study investigates the present state of VR adoption, perceived benefits, concerns, and future expectations among both students and educators. The survey-based approach collected responses from 45,000 students and 2,000 educators across a diverse range of schools in India. The findings highlight a mixed current landscape with significant room for expansion in VR utilization. Both students and educators express optimism regarding the benefits of VR, recognizing its capacity to enhance engagement, comprehension, and motivation in the learning process. However, challenges, including budget constraints, the need for training and support, and concerns about student safety, must be addressed to effectively integrate VR into education. Expectations for the future emphasize inclusivity, accessibility, and customized learning experiences. The research underscores the transformative potential of VR in Indian education while emphasizing the necessity of addressing practical challenges for its successful implementation.

Among the leading immersive technologies, Augmented Reality is one of the most promising and empowering to support designers in production environments. This research investigates the application of mobile augmented reality, based on the Web, as a mediation tool focused on cognitive activities of reading and understanding of Technical Drawings in the production and assembly for Tailor Made projects of the scenographic industry. In this context, the research presents a method to use the WebAR to improve the reading of technical drawings, seeking efficiency on the visualization of models and the exchange of information between professionals, involved in the processes of design, production and assembly of products, in the scope of scenography. This mediation tool was developed using Web AR platforms, compatible with native libraries (ARCore and ARKit) to ensure, first, compatibility with commonly used devices that workers or businesses can access, and secondly, to leverage hybrid tracking techniques that combine vision and sensors to improve the reliability of augmented reality viewing. The proposed solution adopts multiple tracking and navigation techniques in order to expand Space Skills components to provide greater exploratory freedom to users. The research process took place in the light of the Design Science Research Methodology and the DSR-Model, since it aimed to develop a solution to a practical problem, as well as to produce knowledge from this process. Field experiments were conducted in two real companies, with end users on their respective mobile devices, in order to evaluate usability and behavioral intent, through the Acceptance, Intent and Use of Technology questionnaires; and perceived mental workload, NASA-TLX. The experimental results show that the adoption of this tool reduces the cognitive load in the process of reading technical drawings and project´s understanding. In general, it´s usability and intent to use provide significant levels of satisfaction, being positively accepted by all participants involved in the study.

Acute myocardial infarction (AMI) is a leading cause of morbidity and mortality worldwide. This study aimed to test the efficacy of a newly-developed symptom self-management program on health outcomes among inpatients post-AMI. A pilot randomised, controlled trial was utilised. A convenience sample of 90 was recruited from a tertiary hospital in Singapore. Adult inpatients with post-AMI were randomly assigned to the three groups: IManage-HSet, IManage-FF or control group. Sample size was computed using power analysis. Data were collected through self-reported questionnaires and physiological instruments. Data analyses included univariate statistics, analysis of variance and repeated measure analysis of variance. Ninety participants were recruited with 30 in each group. Participants in the IManage-HSet and IManage-FF group had significantly greater relaxation (ηp2 = 0.11), lower objective stress (ηp2 =0.14), and greater knowledge (ηp2 = 0.62) than those of the control group. The two intervention groups had lower subjective stress (ηp2 = 0.04), depression (ηp2 = 0.01), and anxiety (ηp2 = 0.03) than the control but such differences did not achieve statistical significance. Furthermore, most participants reported that they were satisfied with the programs and they provided positive comments on the contents, educational materials and relaxation practice. This pilot study supports the potential benefits and feasibility of the IManage-VR and IManage-FF interventions on stress, perceived relaxation, knowledge and patient satisfaction. Contents of the symptom management interventions could be added into current cardiac rehabilitation programs. Future RCTs with multi-centered sites and larger sample size are required to further test the intervention. This study was prospectively registered with the International Standard Randomised Controlled Trial on the 5th August 2014 with registration number ISRCTN61027816.

Recent digital transformations have significantly impacted the current society, economy, and culture. This includes adoption of rapidly emerging technologies, such as artificial intelligence (AI), immersive technology (e.g., virtual, augmented, mixed and extended reality (VR/AR/MR/XR)), cloud services, and internet of things, in our day-to-day life. `Metaverse’ has emerged as a technology that incorporates many of these transforming technologies to deliver personalised immersive experience related to specific application areas. A potential major beneficiary of Metaverse is the educational ecosystem, where highly immersive learning experiences can be delivered to students, catering to their personal learning needs and train them on life skills such as empathy, ethical qualities, and communication skills. The present-day Metaverse allows physical engagement, enabling users to utilise limb movements to interact with the presented materials. However, ethical concerns and technical limitations impede the widespread implementation of the Metaverse in the real-world. This paper provides a comprehensive survey of the existing literature covering the architecture, type and components of Metaverse, followed by practical aspects of metaverse implementation. The paper is concluded by discussing on the open challenges and issues along with their mitigation strategies and future research directions after the detailed usecase of Metaverse in Education.

The shield tunnels inevitably endure various damage with the service time increasing. Meanwhile, steel corrugated plate has been used extensively in multiple conditions and proved effective to strengthen the segmental joints by full-scale tests. A numerical model is proposed to probe the feasibility of using new Stainless Steel Corrugated Plate (SSCP) to reinforce the shield tunnel segments. A new method, called virtual tracking element technology, is employed to achieve the simulation of realistic stress state of the segmental joint. Moreover, the segmental joint component analysis and parametric study are conducted based on the numerical model. The results demonstrate that: (1) the virtual tracking element technology proves valid and efficient to simulate the secondary stress state of segmental joint; (2) SSCP reinforcement is not fully utilized when the grade of segmental concrete is C50 and it has abundant safety margin for potential overload; (3) SSCP reinforcement is well-performed regardless of the burial depth and reinforcement in advance is recommended.

Mammography is the gold standard for breast cancer screening and diagnostic imaging; however, there is an unmet clinical need for complementary methods to detect lesions not characterized by mammography. Far-infrared 'thermogram' breast imaging can map the skin temperature, and signal inversion with components analysis can be used to identify the mechanisms of thermal image generation of the vasculature using dynamic thermal data. This work focuses on using dynamic infrared breast imaging to identify the thermal response of the stationary vascular system and the physiologic vascular response to a temperature stimulus affected by vasomodulation. The recorded data is analyzed by converting the diffusive heat propagation into a virtual wave and identifying the reflection using component analysis. Clear images of passive thermal reflection and thermal response to vasomodulation were obtained. Validation of this proposed paradigm through further clinical exploration may demonstrate clinical utility for the IR modality in diagnostic imaging, offering a potential solution to the current unmet clinical need.

In music, the role of the interpreter is to play her/his part manipulating the performance parameters in order to offer a sonic rendition of the piece capable of conveying specific expressive intentions. Since the 1980s there has been a growing interest in computational expressive music performance (EMP). This research field has two fundamental objectives: the understanding of the phenomenon of human musical interpretation and the automatic generation of expressive performances. Rule based, statistical, machine and deep learning approaches have been proposed, most of them devoted to the classical repertoire, in particular to piano pieces. On the contrary, we present an introduction to the role of expressive performance within popular music and to the contemporary ecology of pop music production, based on the use of Digital Audio Workstations (DAWs) and virtual instruments. After an analysis of the tools related to expressiveness commonly available to modern producers we propose a detailed survey of research into the computational EMP field, highlighting the potential and limits of what is present in literature with respect to the context of popular music, which by its nature cannot be completely superimposed on the classical one. In the concluding discussion we suggest possible lines of future research in the field of computational expressiveness applied to pop music.

This paper provides a methodology for the production of synthetic images for training neural networks to recognise shapes and objects. There are many scenarios in which it is difficult, expensive and even dangerous to produce a set of images that is satisfactory for the training of a neural network. The development of 3D modelling software has nowadays reached such a level of realism and ease of use that it seemed natural to explore this innovative path and to give an answer regarding the reliability of this method that bases the training of the neural network on synthetic images. The results obtained in the two proposed use cases, that of the recognition of a pictorial style and that of the recognition of migrants at sea, leads us to support the validity of the approach, provided that the work is conducted in a very scrupulous and rigorous manner, exploiting the full potential of the modelling software. The code produced, which automatically generates the transformations necessary for the data augmentation of each image, and the generation of random environmental conditions in the case of Blender and Unity3D software, is available under the GPL licence on GitHub. The results obtained lead us to affirm that through the good practices presented in the article, we have defined a simple, reliable, economic and safe method to feed the training phase of a neural network dedicated to the recognition of objects and features, to be applied to various contexts.

Visualization has always been a crucial part of the educational process. Implementing computer algorithms and virtual reality tools into it is vital for the new generation engineers, scientists and researchers. In the field of chemistry education, various software that allow dynamic molecular building and viewing are currently available. These software are now used to enhance the learning process and ensure better understanding of the chemical processes from the visual perspective. The present short communication provides a summary of these applications based on the NarupaXR program, which is a great educational tool that combines the functionality and simple design necessary for an educational tool. NarupaXR is used with a companion application “Narupa Builder'' which requires a different file format, therefore a converter that allows a simple transition between the two extensions has been developed. The converter sufficiently increases the efficiency of the educational process. The automatic converter is freely available on GitLab (https://gitlab.com/teamSCAMT/converter_mol2_to_xml). The current communication provides detailed written instructions that can simplify the installation process of the converter and facilitate the use of both the software and the hardware of the VR set.

Streptococcus mutans is well known for having virulence factors associated with its cariogenic role, such as glucosyltransferases, which have been used as targets for the virtual screening of molecules with inhibitory capacity. The Antigen I/II of S. mutans is involved in the adhesion to the surface of the tooth and the bacterial co-aggregation in the biofilm formation, despite that, this protein has not been used as a target in a virtual strategy search for inhibitors. In this study we identified in silico and evaluated in vitro molecules with adhesion inhibitory potential on S. mutans Ag I/II. A virtual screening of 883,551 molecules was conducted, cytotoxicity analysis on fibroblast cells, S. mutans adhesion studies, scanning electron microscopy analysis for bacterial integrity, and molecular dynamics simulation were also performed. We have found three molecules (ZI-187, ZI-939, ZI-906) that were not cytotoxic and inhibited the adhesion of S. mutans to polystyrene microplates. Molecular dynamic simulation by 300 nanoseconds showed stability of the interaction between ZI-187 and Ag I/II (PDB: 3IPK). This work provides three new molecules that targets Ag I/II and have the capacity to inhibit in vitro the S. mutans adhesion on polystyrene microplates and provides a new computational line for the search and selection of safe inhibitory molecules against different pathogens.

Social media data is heavily used to analyze and evaluate situations in times of disasters, and derive decisions for action from it. A cruicial part of the analysis is to avoid unnecessary data retention during that process, in order to prevent subsequent abuse, theft or public exposure of collected datasets and thus, protect the privacy of social media users. There are a number of technical approaches out to face the problem. One of them is using a cardinality estimation algorithm called HyperLogLog to store data in a privacy-aware structure, that can not be used for purposes other than the originally intended. In this case study, we developed and conducted a focus group discussion with teams of social media analysts, in which we identified challenges and opportunities of working with such a privacy-enhanced social media data structure in place of conventional techniques. Our findings show that, with the exception of training scenarios, deploying HyperLogLog in the data acquisiton process will not distract the data analysis process. Instead, it will improve working with huge datasets due to the improved characteristics of the resulting data structure.

Wireless Sensor Networks (WSNs) has the characteristics of large-scale deployment, flexible networking, and wide application. It is an important part of the wireless communication networks. However, due to limited energy supply, the development of WSN is greatly restricted. Wireless Rechargeable Sensor Networks (WRSNs) transform the distributed energy around the environment into usable electricity through energy collection technology. In this work, a joint optimization strategy is proposed to improve the energy management efficiency for WRSNs. The joint optimization strategy is divided into two phases. In the first phase, we design an Annulus Virtual Force based Particle Swarm Optimization (AVFPSO) algorithm for area coverage planing. It adopts the multi-parameter joint optimization method to improve the efficiency of the algorithm. In the second phase, a Queuing Game-based Energy Supply (QGES) algorithm is designed for energy scheduling. It converts energy supply and consumption into network service. By solving the game equilibrium of the model, the optimal energy distribution strategy can be obtained. The simulation results show that our scheme improves the efficiency of coverage and energy, and extends the lifetime of WSN.

We use state-of-the-art computer-aided drug design (CADD) techniques to identify prospective inhibitors of the main protease enzyme, M^pro of the COVID-19 virus. With the high-resolution X-ray crystallography structure of this viral enzyme recently being solved, CADD provides a veritable tool for rapidly screening diverse sets of compounds with the aim of identifying ligands capable of forming energetically favorable complexes with M^pro . From our screening of 1,082,653 compounds derived from the ZINC, the DrugBank, and our in-house African natural product libraries, and a rescreening protocol incorporating enzyme dynamics via ensemble docking, we have been able to identify a range of prospective M^pro inhibitors, which include FDA-approved drugs, drug candidates in clinical trials, as well as natural products. The top-ranking compounds are characterized by the presence of an extended ring system combined with functional groups that allow the ligands to adapt flexibly to the M^pro active site as, for example, present in the biflavonoid amentoflavone, one of the most promising compounds identified here. This particular chemical architecture leads to considerable stronger binding than found for reference compounds with in vitro demonstrated M pro inhibition and anticoronavirus activity. The compounds determined in this work thus represent a good starting point for the design of inhibitors of SARS-CoV-2 replication.

Coronavirus Disease 2019 (Covid-19) was first described in December 2019 in Wuhan, Hubei Province, China; and produced by a novel coronavirus designed as the acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Covid-19 has become a pandemic reaching over 1.3 million confirmed cases and 73,000 deaths. Several efforts have been done to identify pharmacological agents that can be used to treat patients and protect healthcare professionals. The sequencing of the virus genome not only has offered the possibility to develop a vaccine, but also to identified and characterize the virus proteins. Among these proteins, main protease (M^pro) has been identified as a potential therapeutic target, since it is essential for the processing other viral proteins. Crystal structures of SARS-CoV-2 M^pro and inhibitors has been described during the last months. To describe additional compounds that can inhibit SARS-CoV-2 M^pro, in this study we performed a molecular docking-based virtual screening against a library of experimental and approved drugs. Top 10 hits included Pictilisib, Nimorazole, Ergoloid mesylates, Lumacaftor, Cefuroxime, Cepharanhine, and Nilotinib. These compounds were predicted to have higher binding affinity for SARS-CoV-2 M^pro than previously reported inhibitors for this protein, suggesting a higher potential to inhibit virus replication. Since the identified drugs have both pre-clinical and clinical information, we consider that these results may contribute to the identification of treatment alternative for Covid-19. Nevertheless, in vitro and in vivo confirmation should be performed before these compounds could be translated to the clinic.

Generator automatic voltage control device (AVC) is an automatic voltage and reactive power optimization control terminal on the power plant side. Aiming at improving the performance of generator automatic voltage control device, this paper introduces a detection method of AVC substation performance based on virtual dispatching terminal environment. During the testing, the upper computer of redundant power plant is connected to the virtual dispatching terminal environment to simulate the sending instructions of AVC master station, the behavior of AVC sub stations and the excitation system of generators. The performance of AVC substation is evaluated according to the feedback adjustment results, which can effectively detect the abnormal behavior of AVC substation in power plant.

The drug discovery process is a complex and time-consuming endeavor that can greatly benefit from advancements in computational biology. This study explores the implementation of GPU-accelerated computational methods to enhance molecular docking simulations and virtual screening techniques, two crucial components of drug discovery. By leveraging the parallel processing capabilities of Graphics Processing Units (GPUs), we significantly accelerate the analysis of protein-ligand interactions and the identification of potential lead compounds. Our approach utilizes optimized algorithms and software frameworks to achieve substantial speedups over traditional CPU-based methods. Results demonstrate that GPU-accelerated molecular docking simulations and virtual screening can reduce computation times by up to 10-fold, enabling rapid and accurate identification of promising drug candidates. This accelerated workflow has the potential to revolutionize the drug discovery pipeline, facilitating the development of novel therapeutics and reducing the time and cost associated with bringing new treatments to market.

Background/Objectives: Informed consent for anesthesia poses both legal challenges and problems of understandable communication. Fulfilling all requirements through anesthesiologists directly interacting with patients is a time- and staff-consuming strategy. Given today's smart technologies, notably including virtual reality (VR), we explored in a prospective randomized study whether 'VR-assisted informed consent' could improve this situation. Methods: Fifty patients scheduled for orthopedic surgery were randomized. In the control group, informed consent was obtained via patient-specialist dialogs only. The patients in the study group, wearing a head-mount display, watched an 8-minute immersive 3D movie with standard explanations of general anesthesia, followed by a patient-specialist dialog to address open question. The time spent on the dialogs in both groups was evaluated as primary outcome variable. As secondary variables, we analyzed both a three-item Likert scale on patient satisfaction with the VR experience and cost differences between both groups. Results: Patient-specialist dialogs were carried on for median (IQR) durations of 93 (20–182) seconds in the study group versus 665 (261–829) seconds in the control group (P<0.001). All patients exposed to VR rated this experience as favorable (87.5%) or neutral (12.5%). Based on anesthesiologists' incomes in the US and UK, our approach would reduce the staff expenditure for each patient-specialist dialog by median amounts of ≈40 or ≈11 US dollars, respectively (2× P<0.001). Conclusions: 'VR-assisted informed consent' for anesthesia is well accepted by patients and reduces the time requirements for patient-specialist dialogs, thus pointing out a potential avenue towards increasing the work-time efficiency of anesthesiologists.

Background: Stroke is the third leading cause of disability, primarily due to motor, sensory, and cognitive impairments. Virtual reality (VR) has shown promising results in post-stroke rehabilita-tion, particularly for upper limb recovery. The World Health Organization Disability Assessment Schedule 2.0 (WHODAS 2.0), aligned with the International Classification of Functioning, Disa-bility, and Health (ICF) principles, is a valid tool for measuring disability regardless of its cause. This study aimed to investigate the feasibility of VR TRAVEE system in upper limb rehabilitation for stroke patients. Methods: 14 stroke patients with residual hemiparesis were enrolled in the study. They underwent a 10-day program combining conventional therapy (CnvT) with VR rehabilitation. At baseline (T0), upper limb was assessed using the Modified Ashworth Scale (MAS), Active Range of Motion (AROM), and the Numeric Rating Scale (NRS) for pain. These assessments were repeated after the 10-day rehabilitation program (T1). Additionally, disability was measured using WHODAS 2.0 at T0 and again 30 days after completing the program. Results: Significant im-provements were observed in AROM, MAS scores for the shoulder, elbow, wrist, and metacar-pophalangeal joints as well as in the reduction of shoulder pain (p˂0.001). WHODAS scores de-creased across all six domains, with a statistically significant improvement in the cognition domain (p=0.011). Conclusions: Combining CnvT with VR as a rehabilitation approach enhances motor function in the upper limb. This method has the potential to reduce disability scores and promote neuroplasticity.

Selection is a fundamental interaction element in Virtual Reality (VR) and 3D user interfaces (UIs). Raycasting, one of the most common object selection techniques, has been known to have difficulties in selecting small or distant objects. Meanwhile, recent advancements in computer vision technology have enabled seamless vision-based hand tracking in consumer VR headsets, enhancing accessibility to freehand mid-air interaction and highlighting the need for further research in this area. This study proposed a new technique called TouchView which utilizes a virtual panel with a modern adaptation of the Through-the-lens metaphor to improve freehand selection for VR UI. TouchView enables faster and less demanding target selection by allowing direct touch interaction with the magnified object proxies reflected on the panel view. Repeated-measures ANOVA on the results of a follow-up user experiment on multitarget selection with 23 participants showed that TouchView outperformed the current market-dominating freehand raycasting technique, Hybrid Ray in terms of task performance, perceived workload, and preference. The user behavior was also analyzed to understand the underlying reasons for these improvements. The proposed technique can be used in VR UI applications to enhance the selection of distant objects, especially for cases with frequent view shifts.

Background: Gliomas, including the most severe form known as glioblastomas, are primary brain tumors arising from glial cells, with significant impact on adults, particularly men aged 45 to 70. Recent advancements in the WHO classification now correlate genetic markers with glioma phenotypes, enhancing diagnostic precision and therapeutic strategies. Aims and Methods: This scoping review aims to evaluate the current state of deep learning (DL) applications in the genetic characterization of adult gliomas, addressing the potential of these technologies for a reliable virtual biopsy. Results: We reviewed 17 studies, analyzing the evolution of DL algorithms from fully convolutional networks to more advanced architectures (ResNet and DenseNet). The methods involved various validation techniques, including k-fold cross-validation and external dataset validation. Conclusions: Our findings highlight significant variability in reported performance, largely due to small, homogeneous datasets and inconsistent validation methods. Despite promising results, particularly in predicting individual genetic traits, the lack of robust external validation limits the generalizability of these models. Future efforts should focus on developing larger, more diverse datasets and integrating multidisciplinary collaboration to enhance model reliability. This review underscores the potential of DL in advancing glioma characterization, paving the way for more precise, non-invasive diagnostic tools.

Background: Virtual Reality (VR) is an emerging tool in the management of anxiety, one of the most disturbing symptoms of Alcohol Use Disorder (AUD), which often leads to relapse. Still, patients with Alcohol Use Disorder frequently have a history of Acute Symptomatic Seizures, and they are subsequently excluded from studies using VR because of the hypothesized fear of inducing photosensitive seizures. The first part of this narrative review explores the pathophysiological mechanisms of seizures associated with AUD, specifically acute symptomatic seizures. In contrast, the second part explores virtual reality’s safe use in seizure-prone individuals, highlighting that the current state-of-the-art is based on a biased per-ception and old epidemiological data from studies conducted on photosensitive seizures in the late 90s. VR exposure has yet to be reported as triggering seizures within known pharmacovigilance databases. Significance: The implications weigh heavily on VR research currently associated with this significant adverse event. Further studies are necessary to address the risk of seizures triggered by VR in patients predisposed to developing seizures, like alcohol use disorder patients with a history of acute symptomatic seizures. Such research is essential to ensure that the potential benefits of Virtual Reality as a tool for managing anxiety in individuals with alcohol use disorder and acute symptomatic seizures are not unduly restricted. Furthermore, AUD can also serve as an intervention model feasible to de-bias attitudes toward the current lack of evidence base concerning the significant adverse events of VR-induced seizures, therefore facilitating the clinical implementation of this unharnessed digital treatment interface.

Cloud data centers play a vital role in modern computing infrastructure, offering scalable resources for diverse applications. However, managing costs and resources efficiently in these centers has become a crucial concern due to the exponential growth of cloud computing. User applications exhibit complex behavior, leading to fluctuations in system performance and increased power usage. To tackle these obstacles, we propose the consolidation of virtual machines (VMs) to optimize resource utilization and reduce operational costs. This paper introduces a novel algorithm, leveraging the Modified Artificial Feeding Birds Algorithm (ModAFBA), to manage cost optimally in cloud data centers by reducing power usage while meeting service level agreements (SLAs). The ModAFBA algorithm, inspired by bird foraging behavior, dynamically adjusts solutions based on environmental changes. Comprehensive experimental evaluation demonstrates the superiority of the proposed algorithm in terms of power usage, migration count, and SLA compliance. Through this research, we aim to advance cost management and resource optimization in cloud data centers, providing a valuable tool for cloud service providers to enhance infrastructure efficiency and achieve cost savings.

There has been an increased focus on new technologies to monitor habitat use and behaviour of cattle, to develop a more sustainable livestock grazing system, without compromising animal welfare. The currently most used method for monitoring cattle behaviour is tri-axial accelerometer data from systems such as virtual fencing technology or bespoke monitoring technology. This method requires high frequency data, and as such, quickly drains contemporary systems of power making it unsuitable for long-term monitoring. In this paper, we explore the possibility of determining habitat preference and habitat utilisation patterns in cattle, using low frequency activity and location data. We do this by (1) calculating habitat selection ratios, (2) determining daily activity patterns and based on those, (3) inferring grazing and resting sites in a group of cattle wearing virtual fencing collars in a coastal setting with grey, wooded and decalcified dunes, humid dune slacks and salt meadows. We found that GPS data, and a measure of activity, combined with accurate mapping of habitats can be an effective tool in assessing habitat preference. The animals preferred salt meadows over the other habitats, with wooded dunes and humid dune slacks being the least preferred. We were able to identify daily patterns in activity. By comparing general trends in activity levels to existing literature, it was possible to somewhat infer resting and grazing behaviour in the different habitats. According to our inference of behaviour the herd predominantly used the salt meadows for resting and ruminating. The approach used in this study allowed us to use GPS location data for measuring the activity and combine it with accurate habitat mapping in a cheap and effective way, which can be an important tool for guiding management decisions.

Fractional flow reserve (FFR) is well recognized as a gold standard measure for the estimation of functional coronary stenosis. Technological progressions in image processing have empowered the reconstruction of three-dimensional models of the coronary arteries via both non-invasive imaging modalities, such as Coronary Computed Tomography Angiography (CCTA), and invasive coronary angiography or intravascular imaging. The application of computational fluid dynamics (CFD) techniques to coronary 3D anatomical models allows the virtual evaluation of the hemodynamic significance of a coronary lesion with high diagnostic accuracy in comparison to the invasive FFR using pressure wires. These opportunities providing hemodynamic information based on anatomy have given rise to a new era of functional angiography and coronary imaging. However, further validations are needed to overcome several scientific and computational challenges before these methods are applied in everyday clinical practice. This review aims to present all the data on the studies and methodologies that have been presented for the virtual estimation of FFR, and the diagnostic execution of the virtual tools for the hemodynamic assessment of coronary lesions compared to the invasive FFR.

Social media has become more popular in the last few years. It has been used in public health development and healthcare settings to promote healthier lifestyles. Given its important role in today's culture, it is necessary to understand its current trends and future directions in public health. This review aims to describe and summarize how public health professionals have been using social media to improve population outcomes. Additionally, it discusses potential future directions on how social media can be used to improve population health. The findings showed how social media has been used as a tool for research, designing and implementing health campaigns, messaging, and health promotion. In addition, social media integration with Artificial Intelligence (AI) and Generative Pre-Trained transformers (GPT) can have a big impact and offer an innovative approach to tackle the problems and difficulties in health informatics. These innovations might improve patient participation, individualized assistance, and care experiences. The research showed how likely social media will keep growing and evolving and, if used effectively, have the potential to help close public health gaps across different cultures and improve population health.

Emotional eating (EE) can be understood as a manifestation of difficulties with emotion regulation (ER) among individuals with eating disorders. Existing interventions do not always successfully treat EE. We developed a novel ER intervention based upon virtual reality to improve EE among adults with an eating disorder diagnosis. The design pivoted to non-immersive virtual delivery to increase access, particularly given heightened demand during COVID-19 for EE treatment. The study aimed to investigate the feasibility, acceptability, and preliminary signals of effectiveness of this novel ER protocol that utilized evidence-based strategies such as mindfulness and imagery rescripting as well as innovative techniques such as virtual reality. Twenty-one adults with a history of an eating disorder diagnosis and self-reported EE were recruited from the Adult Eating Disorders Program within Stanford University to receive seven weekly one-hour virtual experiences (VE) focusing on ER. Participants chose between the novel VE-Emotion Regulation (VE-ER) intervention or continuing with their current treatment as usual. Before and after the seven sessions, participants completed an assessment by filling out online questionnaires. Overall, VE-ER treatment was feasible (100% completion), and participant and therapist acceptability of VE-ER treatment was fairly high. In terms of preliminary effectiveness, the results showed a significant reduction in the frequencies of disordered eating behaviors in both groups, but a greater improvement in EE in the VE-ER group. The VE-ER group also had a significant reduction in emotion dysregulation after the treatment.

This review article explores the convergence of virtual reality (VR) and architectural design from an inclusive lens. It underscores the crucial role of virtual reality (VR) in serving as a catalyst for the incorporation of social and cultural sustainability principles in architectural projects. The exploration is guided by inclusive design principles, which encompass several aspects such as accessibility, cultural sensitivity, diversity and inclusivity, user-centered design, and empathy. These concepts serve as the basis for further investigation into the potential of virtual reality (VR) technology to enhance and heighten these features within architectural design, therefore promoting the progress of social and cultural sustainability. The review article highlights the profound impact that virtual reality (VR) may have, going beyond mere visualisation to generate architectural experiences that are immersive, interactive, and empathetic. These experiences are designed to take into account diverse perspectives and needs.

The expansion of Open World Video Games (OWVGs) has seen the emergence of multiple new fictional worlds. This type of video game is characterized by total immersion in a world built for the players entertainment. What videogames developers want when players enter an OWVG is that they could feel like if they were open a door to an entirely new world and leave the real world behind. These virtual worlds manifest as a complement, an alternative, or the successor to the physical universe, and in some way continue the philosophical tradition of possible worlds begun by Leibniz. Accustomed to ‘surviving’ in hostile environments, millions of people continued to improve their skills in the midst of the COVID-19 pandemic while locked in their homes. Once the pandemic seems to start to be left behind, the paper analyzes the virtual worlds created by the video games and the relations between the pandemic and these fictional worlds.

Considering the harmful effects of cannabis on individuals with a severe mental disorder and the limited effectiveness of current interventions, this case report showcases the beneficial results of a 10-session Avatar intervention for cannabis use disorder (CUD) on a polysubstance user with a comorbid schizoaffective disorder. Virtual reality allowed the creation of an Avatar representing a person significantly related to the patient’s drug use. Avatar intervention for CUD aims to combine exposure, relational, and cognitive behavioral therapies while practicing real-life situations and learning how to manage negative emotions and cravings. Throughout therapy and later on, Mr. C managed to maintain abstinence from all substances. Also, an improvement in the severity of CUD as well as a greater motivation to change consumption, were observed after therapy. As observed by his mother, his psychiatrist, and himself, the benefits of Avatar intervention for CUD extended to other spheres of his life. The drastic results observed in this patient could be promising as an alternative to the current treatment available for people with a dual diagnosis of cannabis use disorder and psychotic disorder, which generally lack effectiveness. A single-blind randomized control trial comparing the treatment with a classical intervention in a larger sample is currently underway to evaluate whether the results are reproducible on a larger sample.

This paper proposes an algorithm for transmitting and reconstructing the estimated point cloud using temporally estimating a dynamic point cloud sequence. When a non-rigid 3D point cloud sequence (PCS) is input, the sequence is divided into groups of point cloud frames (PCF), and a key PCF is selected. After the 3D skeleton is predicted through 3D pose estimation, the motion of the skeleton is estimated by analyzing the joints and bones of the 3D skeleton. For the deformation of the non-rigid human PC, the 3D PC model is transformed into a mesh model, and the key PCF is rigged using the 3D skeleton. After deforming the key PCF into the target PCF utilizing the motion vector of the estimated skeleton, the residual PC between the motion compensation PCF and the target PCF is generated. If there is a key PCF, the motion vector of the target PCF, and a residual PC, the target PCF can be reconstructed. Just as compression is performed using pixel correlation between frames in a 2D video, this paper compresses 3D PCF by estimating the non-rigid 3D motion of a 3D object in a 3D PC. The proposed algorithm can be regarded as an extension of the 2D motion estimation of a rigid local region in a 2D plane to the 3D motion estimation of a non-rigid object (human) in 3D space. Experimental results show that the proposed method can successfully compress 3D PC sequences. If it is used together with a PC compression technique such as MPEG PCC (point cloud compression) in the future, a system with high compression efficiency may be configured.

Virtual reality experiences are frequently created using game engines, yet they are not simple for novices and unskilled professionals who don’t have programming and 3D modeling skills. Concurrently, there is a knowledge gap in software project design for intuitive virtual reality authoring tools, which were supposed to be easier to use. This work compiles design guidelines derived from a systematic literature review to contribute in the development of more intuitive virtual reality authoring tools. We searched the Scopus and Web of Science databases for works published between 2018 and 2021 and discovered 14 papers. We compiled 14 requirement and feature design guidelines, such as Visual Programming, Immersive Authoring, Reutilization, Sharing and Collaboration, Metaphors, and Movement Freedom, among others. The collected guidelines have the potential to either guide the development of new authoring tools or to evaluate the intuitiveness of existing tools. Furthermore, they can also support the development of the metaverse, since virtual content creation is one of its bases.

This study analyzes the academic performance of students from an official school in Bogotá (Colombia) who had asymmetric access to Information and Communication Technologies during the first year of the Covid-19 pandemic. The Classical Linear Regression Model is employed using data from a survey of a representative group of students in the year 2020. Results show technological gaps between students that are associated with asymmetric academic performance against students with limited or null access to the Internet and electronic devices. Results also show that, among students with permanent access to the Internet, women have better scores compared to men’s scores, which implies that women can achieve better academic results than men in virtual education. It is also noted that the sole access to an electronic device does not guarantee good academic achievements if there is no full access to the Internet, and if ICT-use skills have not been developed.

Abstract: This research aims at developing a virtual reality destination experience (VRDE) model as a moderating variable between sustainable tourist behavior (STB) and tourist visit intention (TVI). The portability variable strengthens VRDE, and the content quality variable supports VRDE. The research method used was purposive convenience sampling covering 204 respondents who visited the vicinity of Kebon batik village in Klaten, Central Java, Indonesia. The research findings were H1: STB has a significant effect on VRDE, H2: VDRE has an impact on TRVI, H3: portability has a significant effect on VRDE, and H4: content quality did not have an impact on VRDE. The novelty of this research is the VRDE application applied to Community Sustainable Tourist Behavior in developing countries.

Visually impaired people encounter many impediments and challenges in their lives such as related to their mobility, education, communication, use of technology, and others. This paper reports the results of an online survey to understand the requirements and challenges blind and visually impaired people face in their daily lives regarding the availability and use of digital devices. The survey was conducted among the blind and visually impaired in Saudi Arabia using digital forms. A total of 164 people responded to the survey most of them using the VoiceOver function. People were asked about the use of smart devices, special devices, operating systems, object recognition apps, indoor and outdoor navigation apps, virtual digital assistive apps, the purpose (navigation, education, etc.) of and difficulty in using these apps, the type of assistance needed, the reliance on others in using the assistive technologies, and the level of satisfaction from the existing assistive technologies. The majority of the participants were 18 – 65 years old with 13% under 18 and 3% above 65. Sixty-five percent of the participants were graduates or postgraduates and the rest only had secondary education. White Cane, mobile phones, Apple iOS, Envision, Seeing AI, VoiceOver, and Google Maps were the most used devices, technologies, and apps used by the participants. Navigation at 39.6% was the most reported purpose of the special devices followed by education (34.1%) and office jobs (12.8%). The information from this survey along with a detailed literature review of academic and commercial technologies for the visually impaired was used to establish the research gap, design requirements, and a comprehensive understanding of the relevant landscape, which in turn was used to design smart glasses called LidSonic for visually impaired.

Plasmodium species that cause malaria, a disease responsible for about half a million deaths per annum despite concerted efforts to combat it. The causative agent depends on type III beta phosphatidylinositol 4-kinase (PPI4K) during the development of merozoite. PPI4K is the only clinically validated Plasmodium kinase so far and its inhibitors are effective both in vitro and in vivo. In this work, a small library of ~22 000 fragments was virtually screened using PPI4K homology model to discover potential ligands of the enzyme. 16 virtual hits were selected based on ≤ -9.0 kcal/mol binding energy cut off and were subjected to similarity and substructure searching after they had passed PAINS screening. The derivatives obtained showed improved binding energies, which ranged from -10.00 to -13.80 kcal/mol. Moreover, the topmost ranking compound 31, with interesting drug-like quality was stable within the protein’s binding cavity during the 10 ns molecular dynamics simulation period. In addition, analysis of its binding pose revealed some unique binding interactions with PPI4K active site residues as the basis for the observed improved binding affinity. Overall, compound 31 appears to be a viable starting point for the development of PPI4K inhibitors with antimalarial activity.

Aphasia is one of the most socially disabling post-stroke deficits. Although traditional therapies have been shown to induce adequate clinical improvement, aphasic symptoms often persist. Therefore, new rehabilitation techniques which act as a substitute or as an adjunct to traditional approaches are urgently needed. The present review provides an overview of the efficacy and safety of the most innovative approaches which have been proposed over the last twenty years. First, we examined the effectiveness of the pharmacological approach, principally used as an adjunct to language therapy, reporting the mechanism of action of each single drug for the recovery of aphasia. Results are conflicting but promising. Secondly, we discussed the application of Virtual Reality (VR) which has been proved to be useful since it potentiates the ecological validity of the language therapy by using virtual contexts which simulate real-life everyday contexts. Finally, we focused on the use of Transcranial Direct Current Stimulation (tDCS), both discussing its applications at the cortical level and highlighting a new perspective, which considers the possibility to extend the use of tDCS over the motor regions. Although the review revels an extraordinary variability among the different studies, substantial agreement has been reached on some general principles, such as the necessity to consider tDCS only as an adjunct to traditional language therapy.

This work presents the results of a computational study of the chemical reactivity and bioactivity properties of the members of the Theopapuamides A-D family of marine peptides by making use of our own proposed methodology named Computational Peptidology (CP) that has been successfully considered in previous studies of this kind of molecular systems. CP allowed for the determination of the global and local descriptors that come from Conceptual Density Functional Theory (CDFT) that can give an idea of the chemical reactivity properties of the marine natural products under study which are already known to be related to their bioactivity. At the same time, the validity of the procedure based on the adoption of the KID (Koopmans in DFT) technique as well as the MN12SX/Def2TZVP/H2O model chemistry has been successfully verified. Together with several Chemoinformatic tools that can be used for the improvement of process of Virtual Screening, some additional properties of these marine peptides were identified related to their ability to behave as useful drugs. With the further object of analyzing their bioactivity some parameters of usefulness for future QSAR studies, their predicted biological targets and the the ADMET (Absorption, Distribution, Metabolism, Excretion and Toxicity) parameters related to the Theopapuamides A-D pharmacokinetics are also reported.

During recent decades, contextual computing applications have emerged in the field of healthcare and particularly in the field of telemonitoring of patients suffering from chronic obstructive pulmonary disease (COPD). According to WHO rankings, chronic obstructive pulmonary disease (COPD) is the third leading cause of death worldwide. Various research works are therefore carried out to improve the health of patients and the monitoring of patients in the comfort of their home environment. To this end, several telemonitoring systems are designed to COPD patients. These systems are connected to health center. Emergency physicians follow the patients subscribed to these systems remotely. These systems focus mainly on prediction, decision-making and the requirements of the healthcare profession, and do not address the quality control aspects of services or QoS based on service level agreements (SLAs). This situation can be dangerous for patients in case of extreme exacerbation of COPD patients. For example, the unavailability of the monitoring system can lead to the death of the patient because the emergency physician could not have access to the patient's data in real time in the context of COPD Patient Monitoring. In addition, Remote medical monitoring platforms are manipulating large volumes of data and the risks of data lost or data quality are real. It is therefore important to have the mechanisms to continuously improve the quality of service of these monitoring platforms in general and COPD patients particularly. In this article, we propose an ontology that uses SLA information from COPD monitoring platforms with dynamic data from the patient context. The purpose of this article is to propose a dynamic mechanism model for evaluating SLA violations. This solution allows retrieving knowledge from the main items of the SLA document based on XML and the COPD patient context data dynamically from a COPD SLA ontology. These data retrieved in real time allow the calculation of SLO-based metrics and display a SLA template available on the supplier and consumer interfaces. The information of the SLA violation control Interface changes dynamically depending the context-aware system and SLA document data. The SLA parties can dynamically control their Key Performance Indicators (KPI) Target.

Computer vision technology for automatic recognition and geometric characterization of carbon fibers was proposed in this paper. A two-stage pipeline was used, in the first stage the fundamental neural network model of segmentation SAM(Segment Anything Model) was used, in the second stage the segmentation results were improved by using a trained neural network model DeepLabv3+. Both manually labeled carbon fiber images and generated synthetic images were used for training. It is shown that additional use of synthetic data in training of neural network models improves the quality of segmentation by IoU and Pix Acc metrics from 0.943 and 0.949 to 0.953 and 0.959, i.e. by 1% on average. The total processing time averaged 0.95 seconds for a single fiber image. Based on the segmentation results, an automatic calculation of geometric characteristics and statistics that can be used to evaluate material properties was realized.

Background: Virtual Reality (VR) is transforming neuropsychological assessment by providing immersive environments that closely replicate real-world conditions. This study presents the Virtual Reality Trail Making Test (TMT-VR), a novel adaptation of the traditional Trail Making Test, aimed at evaluating cognitive functions in individuals with Attention Deficit Hyperactivity Disorder (ADHD). We examined the ecological validity, convergent validity, usability, and user experience of the TMT-VR compared to the traditional version. Methods: Fifty-three participants, including 25 with ADHD and 28 neurotypical controls, completed both the traditional and VR versions of the TMT. Participants also provided feedback on the VR experience via standardized questionnaires. Results: Statistical analyses demonstrated a significant positive correlation between TMT-VR scores and both the traditional TMT and ADHD symptomatology as measured by the Adult Self-Report Scale (ASRS), confirming the TMT-VR’s ecological and convergent validity. High usability and positive user experience ratings indicated strong acceptability of the VR platform. Notably, the ADHD group exhibited greater performance differences in the VR environment, suggesting that VR may more effectively capture real-world cognitive challenges. Conclusions: These findings suggest that TMT-VR is a valid, engaging, and ecologically valid tool for cognitive assessment in ADHD, and other clinical populations, offering enhanced insights over traditional methods.

Every country has a different philosophy of education, which in contemporary China manifests itself in ideological guidance at all levels and in all types of schools. China's education has entered a new era, but ideological and political education is still needed in schools and colleges, and its core interest is to cultivate newcomers of the times who can take on the important task of national rejuvenation; in other words, the education sector has to ensure the sustainability of the cultivation of talents as well as the sustainability of socialist development. In this context, ideological and political education has initiated a triple spatial shift, i.e., from classroom space to cyberspace, from physical space to virtual space, and from campus space to social space. The triple spatial transfer has a profound historical logic, which is the inevitable process of the continuous development of ideological and political education itself, and the historical convergence of the Party's proposition, people's expectation and social development in this era. The requirements of the external situation, the needs of internal development, and the needs of the political task constitute the direct reality of the triple spatial transformation. The future direction of the spatial transformation of ideological and political education will be reflected in the intersection of subject and space, the collision of individuality and commonality, and the fusion of unity and diversity.

Background/Objectives: The aim of the project is a longitudinal assessment of body image and mental health in scoliosis females pre-, postoperatively and in a follow-up, and implementation (one group-CBT scoliosis sample, CBTSS) or not (second group-control scoliosis sample, CSS) of CBT interventions. A healthy female sample (HFS) was also selected for comparative purposes. Methods. 36 in total AIS patients participated in the 1st and 2nd study phases, whereas 23 were eligible in the follow-up. Regarding HFS, 18 participants were included in the study. The CBT intervention took place pre- and postoperatively, during the patients' stay in hospital. Participants completed the Spinal Appearance Questionnaire (SAQ), Body Esteem Scale (BES) and Strengths and Difficulties Questionnaire-25 (SDQ-25). Body image was also assessed using a virtual reality-based application “Avatar Scoliosis 3D”. Results: The difference between the desired and objective, actual body shape is significant preoperatively both in the CBTSS and CSS at p

Background: 3D virtual reality (VR) Motionless Imagery Exercise through Avatar (MIEA) was developed to improve elderly’s psychological (cognitive and emotional) and physical health. This study observed the impact of this program on the cognitive functions and emotional well-being and the electrophysiological changes in older adults. Methods: This study was conducted using a randomized controlled trial design. The participants included 38 adults, 65 to 84 years of age, who were physically mobile and neurologically healthy. Among them, 19 participants were assigned to the experimental group, who underwent exercises using elderly avatars in a VR virtual exercise program. The other 19 participants were assigned to the control group who underwent the VR program. Both groups engaged in the VR intervention for 20 minutes three times a week, over six weeks. Results: The cognitive functions, including attention restraint, working memory, and phonemic fluency, of the experimental group showed significant improvements compared to the control group. Regarding emotional well-being, the experimental group showed greater self-efficacy. The electrophysiological changes revealed similar patterns to exercise-induced reactions in electromyography of the experimental group after intervention. Conclusions: These findings confirm that participation in 3D VR MIEA enhances cognitive functions and physical self-efficacy among the elderly. Therefore, 3D VR MIEA can be utilized in the rehabilitation therapy of patients or elderly with limited physical activity.

Because the including of human anatomy forms the foundation for clinical medicine, it has contributed a pivotal role in medical education for many centuries. Thus with advancements in the science of modern, current day medicine, its continued place in the medical school curriculum deserves careful attention. In an attempt to provide guidance to decision-makers involved in clinical anatomy curriculum development at the medical school level, the Educational Affairs Committee of the American Association of Clinical Anatomists (AACA) developed this document, which defines the contours of a gross anatomy curriculum leading to the M.D. or D.O. degree. The main body of the document sets forth the anatomical concepts as well as the subject matter a student should master prior to graduation from medical school. Gross anatomy dissection is still a crucial topic in graduate and medical school. The nature and content of gross anatomy, which was historically regarded as a core course in the first year of medical education in MBBS, MD, DO, and some PhD and Graduate curricula as well as in other disciplines of selective graduate education and non-allopathic medical programs, have been significantly impacted by emerging challenges in the pedagogy of delivering medical education in the past ten years. A seemingly ever-increasing emphasis on additional modules in molecular biology, emerging pharmacotherapeutics and pathophysiology content have resulted in a condensation and apparent erosion of previously allotted classroom and laboratory hours in the gross anatomy curriculum. In addition, an imposition of financial constraints and a decreasing availability of sufficient cadaver donations to support gross anatomy dissection labs has also occurred in some locations. An innovative clinically focused cadaveric anatomy program is described which has improved the delivery and content retention of medical and graduate students and has become one of the most sought-after modules in the revised clinically oriented curriculum and has been deemed highly relevant to current medical education and graduate studies.

This cross-sectional study investigates the impact of Virtual Private Networks (VPNs) on Nigerians during the 2021 Twitter ban, prompted by the Nigerian government's suspension of Twitter operations following the deletion of a tweet by the President. The study aims to analyze the frequency and awareness of VPN and Twitter usage among Nigerians during the ban, addressing specific objectives. Employing a survey research method, data was collected from 400 respondents through online and offline questionnaires. Descriptive statistical tools were used for data analysis, revealing significant findings. Results indicate a substantial decrease in Twitter usage during the ban, with IPVanish emerging as the preferred VPN brand. The study also highlights an increase in VPN awareness post-ban, emphasizing the need for educational initiatives. The demographic analysis reveals a dominant age group of 21 to 25 among social media users. Overall, the research underscores the complex interplay between social media dynamics, VPN adoption, and demographic factors, emphasizing the importance of nuanced regulatory approaches and ongoing user education in Nigeria's online landscape.

In this research, the concept of the instability of tension in Microgrid still becomes the focus of study and purpose. Scrutinously, First-Swing Instability occurs in the system in noted changes with properties of making the system unstable or restore to a state of stability. The latter calls itself as a phenomenon of re-synchronization. Allied to aspects of system instability, it is evident that by connecting fast electric chargers for battery-electric vehicles to the distribution system from microgrids, they increase the necessary basic electrical charges and reduce the stability of the electrical energy system. Transient electrical currents have the characteristic of severely impacting microgrids not prepared in connected states or island of the main system. The occurrences of the electromagnetic incompatibility of the inrush current, due to their unpredictability and intermittent characteristic, have complex identification studies. With the elevation of electricity demand by battery-electric vehicle chargers, concerns about the effects of the integration of the electricity grid increase proportionally. The research described in this article emphasizes the influence of fast chargers’ initialization on the power variation related to the re-synchronization phenomenon and its mitigation of the stability of electricity microgrid. An optimization algorithm based on particle swarm optimization (PSO) implements the development of virtual impedances. The PSO optimization algorithm analyzes all possible operating points and aims to maximize the stability index of microgrid, maintaining reactive energy incompatibilities at the minimum level supported. The fractional objective function facilitates the service to these goals simultaneously. The optimization algorithm is implemented in a case study and the corresponding virtual impedance is incorporated into the microgrid. Voltage levels are verified as a condition in the optimization process, comparing system effectiveness.

The novel coronavirus disease (COVID-19) pandemic has resulted in over 720 million confirmed cases and 7 million deaths worldwide, with insufficient treatment options. Innumerable efforts are being made around the world for faster identification of therapeutic agents to treat the deadly disease. Postacute sequelae of SARS-CoV-2 infection or COVID-19 (PASC), also called Long COVID, is still being understood and lacks treatment options as well. A growing list of drugs are being suggested by various in silico, in vitro and ex vivo models, however currently only two treatment options are widely used: the RNA-dependent RNA polymerase (RdRp) inhibitor remdesivir, and the main protease inhibitor nirmatrelvir in combination with ritonavir. Computational drug development tools and in silico studies involving molecular docking, molecular dynamics, entropy calculations and pharmacokinetics can be useful to identify new targets to treat COVID-19 and PASC, as shown in this work and our recent paper that identified alendronate as a promising candidate. We have now investigated all bisphosphonates which can bind competitively to nidovirus RdRp-associated nucleotidyl (NiRAN) transferase domain, and systematically down selected seven candidates (CHEMBL608526, CHEMBL196676, CHEMBL164344, CHEMBL4291724, CHEMBL4569308, CHEMBL387132, CHEMBL98211), two of which closely resemble the approved drugs minodronate and zoledronate. This work and our recent paper together provide an in silico mechanistic explanation for alendronate and zoledronate users having dramatically reduced odds of SARS-CoV-2 testing, COVID-19 diagnosis, and COVID-19-related hospitalizations, and indicate that similar observational studies with minodronate could be valuable.

A sustainable smart tourism ecosystem relies on building digital networks that link tourists to destinations. This study explores how web and immersive technologies, such as the VRRO platform, can improve tourism by offering interactive experiences to augment traditional travel. The study underscores the role of VRRO's design in enhancing user interaction and engagement, thereby encouraging the generation of user content and the development of a virtual tour network. An empirical analysis investigates user engagement, revealing that the platform is accessible to users regardless of their technological familiarity. It suggests a high likelihood of sustained use and recommendations. In conclusion, VRRO demonstrates how accessible and innovative technologies in tourism modernize travel experiences and significantly contribute to the evolution of the broader tourism ecosystem.

Virtual reality software might be challenging to utilize for beginners and unskilled professionals who do not have a programming or 3D modeling background. Concurrently, there is a knowledge gap in software project design for intuitive virtual reality authoring tools, which were supposed to be easier to use. These tools are frequently insufficient due to a lack of support and standard operating procedures. Adopting the Design Science Research paradigm, this study aims to evaluate the validity of fourteen design guidelines for the development of intuitive virtual reality authoring tools as an artifact. While a previous study completed the first steps of the Design Science Research, by identifying problems, defining solution objectives, and developing and demonstrating the design guidelines, this work seeks to qualitatively evaluate their application in a practical experiment. A group of engineering students with no prior experience in creating virtual worlds were tasked with examining the design guidelines while using the NVIDIA Omniverse Enterprise as an exemplary use case and responding to a questionnaire and a focus group interview about how they perceived these guidelines. A correlation analysis confirmed that most guidelines scores behaved as expected and were ranked according to the use-case functionality. The participants understood the guidelines' definition and could decide if they agreed or disagreed with their presence during the experiment. We conclude that, in accordance with the Design Science Research, the proposed artifact is useful, i.e., the design guidelines for virtual reality authoring tools perform what they are designed to do and are operationally reliable in accomplishing their goals.

Vein blood sampling is one of the methods of mass blood sampling, and is an act of drawing blood from a vein for blood type discrimination, confirmation of various physiological indicators, disease diagnosis, and the like, and is the most commonly used blood sampling method. An important point in vein blood sampling is to search for the exact location of the vein and insert the blood sampling. This is influenced by the patient's obesity, skin and blood vessel conditions, and the experience of the clinical technologist, nurse, and resident who performs the blood sampling. It is required to perform blood sampling technique practice. However, due to many limitations of the practice room or laboratory, there is a problem of using only a limited environment and model for clinical practice. As a result, many medical educational institutions have situations in which only fragmentary clinical practices are performed, and it is difficult to per-form a large number of blood sampling skills practices, so they do not provide enough experience to understand the actual skill field. In this paper, we propose a method for developing a virtual reality-based vein blood sampling simulator to practice a large number of blood sampling techniques without restrictions. The proposed vein blood sampling simulator can operate a 3D model related to vein blood sampling using HMD Controller and Haptic in a virtual space for vein blood sampling practice by wearing an HMD (Head mounted display), and can perform vein blood sampling practice through interaction with the patient 3D model. there is. In addition, the effectiveness of the simulator developed for dental students was verified, and as a result of the verification, the potential of the proposed vein blood sampling simulator was confirmed.

Activities in the digital economy driven by information technology have rapidly increased in scope and speed in the aftermath of COVID-19. Meanwhile, social isolation accelerated by quarantine measures has increased concerns about individuals’ mental health. However, little is known about the specific consequences of online interactions, especially when applied in online fan community-based relationships where loyal community members are prevalent. Therefore, we examined whether a sense of virtual community (SOVC) can link fans’ online activities with their mental well-being and behavioral loyalty to the platform. For this purpose, we focus on BTS fandom “Adorable Representative MC for Youth” (ARMY) behaviors and attitudes on the fan community platform Weverse. With 202 valid data samples acquired from global ARMY, this study conducted a partial least squares–structural equation modeling analysis. The empirical findings reveal that SOVC in Weverse is significantly influenced by the intensity of online interactions with other fans and parasocial relationships with celebrities. SOVC is found to be the direct predictor of fans’ behavioral loyalty and mental well-being. When considering fans’ perceptions of other social media platforms, dissatisfaction with previous online fan communities enhances the intensity of online interactions with other fans in Weverse.

In the field of robotics education, introductory courses would ideally utilize heavy industrial arms for hands-on learning. This would provide students with valuable experience in joint programming, which involves direct control of each joint motor in the arm to accomplish desired path planning and differential movements. This practice requires consideration of the physical dynamics of the arm. However, the use of heavy industrial arms has several drawbacks. They are large and expensive, require specialized maintenance, can pose safety risks, and they typically do not allow for direct control of the joint motors. One solution is to use a small, lightweight, toy-like arm. While these are cost-effective and provide direct access to the joint motors without posing safety risks, their lightweight construction means they exhibit minimal dynamic behavior, which limits their educational value. Another solution involves a robotic arm simulator that uses a virtual arm. However, a virtual arm doesn't offer the same level of hands-on engagement and excitement as a physical arm. We propose a hybrid solution that combines a small physical arm with a virtual arm. This approach provides students with the experience of working with an industrial arm, but without the associated difficulties. We demonstrate how this approach successfully improved the completion rate of joint programming assignments, offering a promising solution for practical robotics education.

The complexity of objects and control systems increases the requirements for mathematical models. The structural identifiability (SI) assessment of nonlinear systems is one of the identification problems. Until now, this problem solves by parametric methods using various approximation methods. This approach is not always effective under uncertainty. We apply an approach to SI estimation based on the analysis of virtual structures. The requirements form for the system input based on the expansion of the excitation constancy property and S-synchronizability. The approach generalization to structural identifiability used in the analysis of systems with symmetric nonlinearity is given. homothety and identifiability conditions for systems with non-symmetric nonlinearities (SNN) obtained. The detectability and recoverability proofed for virtual frameworks (VF) guaranteed the SI estimation under uncertainty. The conditions under which the non-symmetric nonlinearity is hypothetical symmetric nonlinearity obtained. SI estimation examples considered for closed nonlinear systems under uncertainty.

The use of active video games or exergames has been booming recently, as they are motivating and promote exercise and healthy lifestyle habits for their users, and these immersive virtual reality (IVR) exercise programs could be compared to traditional physical exercise programs. A starting point for this would be to explore the physiological responses that can be generated by its use. Therefore, the main objective of this study was to evaluate the response across certain physiological parameters (heart rate, blood pressure and stress) after an IVR exergame exposure in a sample of healthy adults, and secondarily to explore its feasibility and usefulness as a tool to facilitate physical exercise. 37 healthy adults (22-54 years, 54.1% women) participated in the study. They carried out one exergaming session with the HTC Vive ProTM hardware. The primary outcome was evaluated using the concentration of cortisol, heart rate and blood pressure. Secondary outcomes were evaluated with safety using the Simulator Sickness Questionnaire (SSQ); usability evaluated with the System Usability Scale (SUS); personal experiences evaluated with Game Experience Questionnaire (GEQ) and perceived exertion through the Borg perceived effort scale. All participants completed the IVR session without significant adverse effects, and all physiological parameters analysed increased significantly in relation to pre-intervention levels. Perceived exertion corresponded to a moderate to intense exercise (6.30±0.50/10 on the modified Borg scale). All the sample considered the experience as good or very good and would recommend it. These findings support that our IVR session can be compared to a moderate to intense physical activity, as it involved similar perceived exertion with significant increases in heart rate, blood pressure and salivary cortisol levels.

A framework for optimal sensor placement (OSP) for virtual sensing using the modal expansion technique and taking into account uncertainties is presented based on information and utility theory. The OSP maximizes a utility function that quantifies the expected information gained from the data for reducing the uncertainty of quantities of interest (QoI) predicted at the virtual sensing locations. The utility function is extended to make the OSP design robust to uncertainties in structural model and modelling error parameters, resulting in a multidimensional integral of the expected information gain over all possible values of the uncertain parameters and weighted by their assigned probability distributions. Approximate methods are used to compute the multidimensional integral and solve the optimization problem that arises. The Gaussian nature of the response QoI is exploited to derive useful and informative analytical expressions for the utility function. A thorough study of the effect of model, prediction and measurement errors and their uncertainties, as well as the prior uncertainties in the modal coordinates on the selection of the optimal sensor configuration is presented, highlighting the importance of accounting for robustness to errors and other uncertainties.

Binge-eating disorder (BED) and bulimia nervosa (BN) have adverse psychological and medical consequences. Novel interventions, like the integration of virtual reality (VR) with cue-exposure therapy (VR-CET), enhance outcomes for refractory patients compared to cognitive behavior therapy (CBT). Little is known about the feasibility and acceptability of translating VR-CET into real-world settings. To investigate this question, adults previously treated for BED or BN with at least one objective or subjective binge episode/week were recruited from an outpatient University eating disorder clinic to receive up to eight weekly one-hour VR-CET sessions. Eleven of 16 (68.8%) eligible patients enrolled; nine (82%) completed treatment; 82% (9/11) provided follow-up data 7.1 (SD=2.12) months post-treatment. Overall, participant and therapist acceptability of VR-CET was high. Intent-to-treat objective binge episodes (OBEs) decreased significantly from 3.3 to 0.9/week (p < .001). Post-treatment OBE 7-day abstinence rate for completers was 56%, with 22% abstinent for 28 days at follow-up. Among participants purging at baseline, episodes decreased from a mean of one to zero/week, with 100% abstinence maintained at follow-up. The adoption of VR-CET into real-world clinic settings appears feasible and acceptable, with a preliminary signal of efficacy. Findings, including some loss of treatment gains during follow-up may inform future treatment development.

Despite recent developments in monitoring and visualizing construction progress, the data exchange between construction jobsite and office lacks automation and real-time recording. To address this issue, a near real-time construction work inspection system called iVR is proposed; this system integrates 3D scanning, extended reality, and visual programming to visualize interactive onsite inspection for indoor activities and provide numeric data. iVR comprises five modules: iVR-location finder (finding laser scanner located in the construction site) iVR-scan (capture point cloud data of jobsite indoor activity), iVR-prepare (processes and convert 3D scan data into a 3D model), iVR-inspect (conduct immersive visual reality inspection in construction office), and iVR-feedback (visualize inspection feedback from jobsite using augmented reality). An experimental lab test is conducted to validate the applicability of iVR process; it successfully exchanges required information between construction jobsite and office in a specific time. This system is expected to assist Engineers and workers in quality assessment, progress assessments, and decision-making which can realize a productive and practical communication platform, unlike conventional monitoring or data capturing, processing, and storage methods, which involve storage, compatibility, and time-consumption issues.

Biofilms are communities of microorganisms that can colonize biotic and abiotic surfaces playing a significant role in the persistence of bacterial infection and antibiotic resistance. About 65% and 80% of microbial and chronic infections are produced by biofilm formation. The increase in infections by multi-resistant bacteria draws attention to the discovery of new drugs based on natural inhibitory molecules. The inhibition of diguanylate cyclases (DGCs), the enzyme implicated in the synthesis of the second messenger, cyclic diguanylate (c-di-GMP), involved the biofilm formation, represents a potential method for preventing the biofilm development. It has been extensively studied using PleD protein as a model of DGC for in silico studies as virtual screening and as a model for in vitro studies in biofilms formation. In the present study 224205 molecules from natural products database, ZINC15 has been evaluated through molecular docking and molecular dynamic simulation, our result suggests trans-Aconitic acid (TAA) as a possible starting point for hit-to-lead methodologies to obtain new molecules capable of inhibiting the PleD protein and hence blocking the biofilm formation.

The novel coronavirus (SARS-CoV-2) is a human pathogen recently emerged in China, causing a global pandemic of severe respiratory illness (COVID19). SARS-CoV-2 makes entry into human cells through its spike (S) protein that binds to cell surface receptors. Widespread of SARS-CoV-2 has been attributed to high affinity of S protein to its receptor. A homology model of the receptor binding domain of SARS-CoV-2 S protein (RBD) was built. RBD- receptor docking and published molecular dynamics data were used to map the key RBD-receptor interaction hotspot (RBDhp) on the RBD. Primary virtual screening was carried out against RBDhp using more than 3300 compounds approved by U.S Food and Drug Administration (FDA) and other authorities for human use. Compounds that bind to hpRBD with a binding energy ≤ - 6.5 kcal/mol were subjected to secondary screening using a recently published cryo EM (2.9 Å) structure of RBD. A cardiac glycoside (dgitoxin), two anthracyclines (zorubicin and aclarubicin), a tetracycline derivative (rolitetracycline), a cephalosporin (cefoperazone) and a food dye (E-155) were predicted to be most potent inhibitors of RBD – receptor interaction. An anti-asthmatic drug (zafirlukast) and several other drugs (itrazol, fazadinium, troglitazone, gliquidone, Idarubicin, Oxacillin) were found to be high affinity binders that may have a potential to inhibit RBD – receptor interaction.

SARS-CoV-2 is the betacoronavirus responsible for the COVID-19 pandemic. It was listed as a potential global health threat by WHO due to high mortality, high basic reproduction number and lack of clinically approved drugs and vaccines for COVID-19. The genomic sequence of the virus responsible for COVID-19, as well as the experimentally determined three dimensional structure of the Main protease (Mpro) are available. The reported structure of the target Mpro was utilized in this study to identify potential drugs for COVID-19 using molecular docking based virtual screening of all approved drugs. The results of this study confirm preliminary reports that some of the drugs approved for treatment of other viral infections have the potential for treatment of COVID-19. Selected antiviral drugs, approved for human therapeutic applications, were ranked for potential effectiveness against COVID-19, based on predicted binding energy to the target Mpro of SARS-CoV-2, and novel candidates for drug repurposing were identified in this study. In addition, potential mechanisms for beneficial off target effects of some drugs in clinical trials were identified by using molecular docking.

With the existence of several programming languages such as C/C++, Java, C#, LISP, Prolog, Python, Simula, F#, Go, Haskell, Scala, Ruby, Dart, Swift, Groovy etc. and diverse paradigms like structured, object-oriented, list, aspect-oriented, service-oriented, web, mobile and logic programming, there is a need to perform an exhaustive comparative analysis of diverse compilers and environments before making a choice of implementation technology in software engineering. Optimization of compilers helps to reduce execution time by making use of high speed processor registers, thereby, eliminating redundant computation. This paper reports some series of performance analysis done with some popular programming languages including Java, C++, Python and PHP. Programs involving recursive and iterative functions like factorial of large numbers and binary search of large arrays were run on the various platforms with the execution time recorded in milliseconds and represented in a chart. This can aid in making a selection of the appropriate language to use for a given application domain.

Collision avoidance is an important feature in advanced driver-assistance systems, aiming at providing correct, timely and reliable warnings before an imminent collision (objects, vehicles, pedestrians, etc.). A co-simulation framework is proposed in this paper to address the design and evaluation of collision avoidances in a cyber-physical system. The co-simulation framework is supported on the interaction between SCANeR and Matlab/Simulink. From the best of authors’ knowledge, two main contributions are reported in this paper. Firstly, the modelling and simulation of virtual on-chip LIDAR sensors in a cyber-physical system (CPS) considering traffic scenarios is presented. The CPS is designed and implemented in SCANeR. Secondly, an obstacle recognition library with three specific Artificial Intelligence-based methods is also designed based on sensory information database provided by SCANeR. Three methods for collision avoidance detection are considered, i.e.; a multi-layer perceptron neural network, a self-organization map and a support vector machine. Finally, a comparison among these methods for detecting obstacles before different weather conditions is done with very promising results in terms of accuracy. The best results are achieved using the multi-layer perceptron in sunny and fog conditions, the support vector machine in rainy and self-organized map in snowy conditions.

Metaverse represents a multifaceted digital universe integrating diverse technologies to create immersive, interconnected virtual environments. Key components foundational to its structure include the infrastructure layer for hardware and network support, the human interface layer utilizing virtual reality (VR) and augmented reality (AR) devices, and a decentralized layer leveraging blockchain for secure digital asset management. Further components encompass spatial computing for realistic 3D environments, the creator economy for content generation and monetization, and discovery mechanisms for navigation within Metaverse. VR, AR, blockchain, AI, the fifth-generation (5G) networks, and the Internet of Things (IoT) are central to Metaverse functionality, enabling real-time interactions and data integration. Real-Time Metaverse aims to replicate instantaneous real-world interactions, requiring advanced technological infrastructure for seamless data exchange. Critical challenges include ensuring low latency, high bandwidth, scalability, and robust security measures. Metaverse’s potential spans various domains, promising to revolutionize social interactions, entertainment, workplaces, and education through dynamic, immersive experiences. Ongoing advancements in high-performance computing, cloud services, and AI-driven technologies are essential for addressing existing barriers and achieving a cohesive, secure, and inclusive Metaverse ecosystem. Future research must focus on enhancing user experience, accessibility, and standardized interoperability to fully realize the transformative capabilities of a Metaverse.

Background: Regular moderate-vigorous intensity exercise is recommended for adults as it can improve longevity and reduce health risks associated with a sedentary lifestyle. However, there are barriers to achieving intense exercise that may be addressed using virtual reality (VR) as a tool to promote exercise intensity and adherence, particularly through visual feedback and competition. The purpose of this work is to compare visual feedback and competition within fully-immersive VR to enhance exercise intensity and user experience of exercise for young adults; and to describe and compare visual attention during each of the conditions. Methods: Young adults (21- 34 years old) bicycled in three 5-minute VR conditions (visual feedback, self-competition and competition against others). Exercise intensity (cycling cadence and % of maximum heart rate) and visual attention (derived from a wearable eye tracking sensor) were measured continuously. User experience was measured by an intrinsic motivation questionnaire, perceived effort and participant preference. A repeated measures ANOVA with paired t-test post-hoc tests was conducted to detect differences between conditions. Results: Participants exercised at a higher intensity and had higher intrinsic motivation in the two competitive conditions compared to visual feedback. Further, participants preferred the competitive conditions and only reached a vigorous exercise intensity during self-competition. Visual exploration was higher in visual feedback compared to self-competition. Conclusion: For young adults bicycling in VR, competition promoted higher exercise intensity and motivation compared to visual feedback.

Embracing Fourth Industrial Revolution(4IR) techniques is a need for a long-term sustainability and to do automation in the processes of Industrial and education sector. Rapid advancement in the information technology and other engineering technologies demand more proactive steps in the education institutes. In the post pandemic world, there is an increasing demand of changes in teaching and learning methodologies with the support of modern digital technologies. So, all of the teaching institutes need to have a significant step change in the areas of learning and teaching. The impact of 4 IR is more on the education sectors compared to previous generation’s industrial revolution. Keeping track of key technologies can be quite a challenge as they keep evolving at a very fast pace. Fourth Industrial revolution is the current technological digital revolution in which major focus is on cyber physical and biological systems such as Artificial Intelligence, Robotics, Internet on Things, Virtual Reality etc., The educators and institutions should establish the pedagogies and teaching with the aid of Industry 4.0 techniques to evolve education 4.0. So, it is very important to understand the challenges and competencies required about the implementation of 4IR by the faculty members and students who are currently studying in Higher Education Institutes (HEIs). This paper aim is to do a systematic review about industry 4.0 techniques and its application in relate to the online learning and teaching, change in pedagogies, enhancement of data management in HEIs, digital and virtual laboratories etc.

This study explored the effectiveness of a virtual music therapy program, based on positive psychotherapy principles, for college students during the COVID-19 pandemic. Twenty-four undergraduate students with partial PTSD were initially assigned to either an experimental group or a control group, with 11 participants in each group by the study's end. The experimental group underwent 15 video sessions of the therapy program, completing one session per weekday over three weeks. The program involved worksheets targeting goals aligned with positive psychology, such as positive affect, life meaning, personal strengths, gratitude, hope, and happiness. Activities included writing music autobiographies, creating and analyzing song lyrics, and exploring various music pieces. The effectiveness of the intervention was measured using the 21-item Depression Anxiety Stress Scale and the Korean Version of Positive Psychological Capital (K-PPC) before, immediately after, and three weeks post-program. The experimental group showed significant improvements in stress, anxiety, depression, self-efficacy, resilience, and the K-PPC total score compared to the control group. These improvements were maintained at the three-week follow-up. The findings suggest that positive psychology-based virtual music therapy can significantly enhance the mental health of highly stressed college students, especially during challenging times like the COVID-19 pandemic.