The rapid development of quantum computing devices promises powerful machines with capabilities that solve a wide range of problems that traditional computers cannot. Therefore, quantum computers generate new threats at unprecedented speed and scale and specifically pose an enormous threat to encryption. Lattice-based cryptography is considered to be the rival to a quantum computer attack and the future of post-quantum cryptography. So, cryptographic protocols based on lattices have a variety of benefits, like security, efficiency, lower energy consumption, and speed. In this work, we study the most well-known lattice-based cryptosystems while a systematic evaluation and comparison is presented also, and focuses on their strengths and weaknesses.

Many assets of clinical medicine, such as clinical chemistry and diagnostic imaging, make clinical diagnosis outstanding compared to postmortem diagnosis. An assessment of functional status certainly has priority over the postmortem, cross-sectional use of diagnostic tests and laboratory equipment. In addition, the cost of these tools is sometimes steep, and their use does not always fit into a reasonable cost–benefit ratio. However, sometimes postmortem observations, such as inflammation, pulmonary edema, or infiltration and cerebral swelling, cannot be explained without implementing immunohistochemical markers for postmortem diagnosis. Introducing blood-based biomarkers in postmortem care could significantly reduce the rates of inconclusive postmortems and discrepancies in autopsy findings and clinical diagnoses. This is particularly relevant in the scope of vascular pathology, considering the great burden of vascular diseases in overall mortality. Expanding traditional autopsy with blood-based (circulating) biomarkers to avoid invasive postmortem examination would have cultural, religious, and potential economic advantages. All of the target molecules are discussed in the context of the process they up-regulate or down-regulate and which turns out to be the final cause of death. Ultimately, it is evident that further studies are needed to provide concrete validation for a combination of markers on a specific case order to reach a postmortem diagnosis with or without clinical records.

Fe rich soft magnetic alloys are candidates for applications as magnetic sensors and actuators. These alloys can also be added to hard magnetic compounds to obtain spring magnets. In this work we produce two nanocrystalline Fe-Zr-B-Cu alloys by the powder metallurgy powder technology of mechanical alloying. The increase of the boron content favors the reduction of the crystalline size. Thermal analysis (by differential scanning calorimetry) shows at temperatures between 450 and 650 K wide exothermic processes, associated with the relaxation of tensions of the alloys produced by milling. At high temperatures, a main crystallization peak is found. The apparent activation of this process was determined by Kissinger and isoconversional methods. The values are compared with those found in the scientific literature. Likewise, adapted thermogravimetry permits to determine the Curie temperature. The functional response has been analyzed by hysteresis loop cycles. According to the composition, the decrease of the Fe/B ratio diminishes the magnetic soft behavior.

The oncologic disease is a big global health issue that causes thousands of deaths annually, and it has a significant impact in the life quality of patients. Prostate cancer (PCa) is the second most diagnosed cancer and the fourth leading cause of cancer-related death in men in the western world. Delineation of pathogenetic pathways and key driver molecular alterations involved in PCa development has provided a roadmap for the evaluation of biomarkers in predicting disease outcome and to identify potential therapeutic targets. Chemotherapeutic agents introduced from the 1990s include the taxanes (paclitaxel, docetaxel and cabazitaxel), which are the most anticancer drugs used for PCa treatment. This review presents the current knowledge about the onset and development of PCa, state-of-art on the use of taxane-based therapy, and their combination with targeting different transmembrane oncoproteins in PCa. The silencing of some transmembrane proteins can improve taxane sensitivity, and therefore, may be a mechanism to improve the ef-fectiveness of these drugs in PCa treatment. This combined therapy needs to be explored as po-tential therapeutic agent for reducing cell proliferation, migration, and invasiveness in PCa.

Objective: To investigate the feasibility and preliminary effects of a 12-week home-based moderate intensity cycling programme in stroke survivors. Design: Single-blinded, parallel group, Randomised Controlled Trial Setting: Home-based Participants: Participants will be survivors of first-ever stroke and randomly assigned to an Active Cycling Group (ACG) or control group. Intervention: The ACG performed a 12-week home-based cycling programme, three sessions per week. Work intervals were executed at 75% of the maximal heart rate (HR_max), recovery intervals at 50% of HR_max. Work interval duration increased from three ten-minute intervals to 30 minutes continuous cycling. The control group completed a 12-week neurocognitive exercise programme. Main outcome measurements: Primary outcome measures are compliance with training, adherence to protocol and safety as measured by adverse events. Secondary outcome measurements included a: simplified modified Rankin Scale questionnaire (stroke severity), Six-Minute Walking Test (walking ability), Ten-meter Walk Test (walking ability), Rivermead Mobility Index (walking ability), graded submaximal cycling test (exercise capacity), Physical Activity for Individuals with Physical Disability questionnaire (physical activity), EQ-5D-5L (quality of life), Stroke Specific Quality of Life questionnaire (quality of life), Montreal Cognitive Assessment (cognition), General Self-Efficacy Scale (self-efficacy), and Exercise Self-Regulation Questionnaire (self-regulation).

Close to half (45.4%) of 2.3 million breast cancers (BC) diagnosed in 2020 were from Asia. While the burden of breast cancer has been examined on the level of broad geographic regions, literature on more in-depth coverage of the individual countries and subregions of the Asian continent is lacking. This review examines the breast cancer burden in 47 Asian countries. Breast cancer screening guidelines and risk-based screening initiatives are discussed.

ASEAN SME has a role as the regional socioeconomic stabilizer. This particular role is inseparable from endogenous multi-sector collaboration. Although, Indonesian SMEs were struggled in adopting Industry 4.0 correspond to digital infrastructure and digital literacy problems. This study evaluates Indonesian SME collaboration dynamics with government and technology startup (TS). The integration of agent-based model and causal loop simulation were employed to assess the TS collaboration impact on SME Industry 4.0 adoption and SME competition with larger competitors. The simulation results imply the SME collaboration with TS can lead to early adoption of Industry 4.0 which balances the business competition environment. The model also shows rising the government aid exponentially can help the SME to late adoption of Industry 4.0 which unable to sustain the SME in business competition. Thus, the developed integrative simulation model is a state-action planning model with each state result bounded to the previous state result that determined by initial input parameters. Conclusively, the model can be used as a resiliency planner for SME Industry 4.0 adoption.

After a long limbo, RNA has gained its credibility as a druggable target, fully earning its de-served role in the next-generation area of pharmaceutical R&D. We have recently probed the Trans-Activation Response element (TAR), a RNA stem–bulge–loop domain of the HIV-1 genome with bis-3-chloropiperidines (B-CePs), and revealed the compounds unique behavior in stabiliz-ing TAR structure, thus impairing in vitro the chaperone activity of the HIV-1 nucleocapsid (NC) protein. Seeking to elucidate the determinants of B-CePs inhibition, we have further characterized here their effects on the target TAR and its NC recognition, while developing quantitative analyti-cal approaches for the study of multicomponent RNA-based interactions.

Cadmium (II) contamination in the environment is an emerging problem due to its acute toxicity and mobility, so it is very urgent to remove this species from industrial wastewater before it is discharged into the environment. Thus, a starch-based activated carbon (AC) with a specific surface area of 1600 m2g-1 is used as an adsorbent for the capturing of toxic Cadmium (II) ions from synthetic solution. The sorbent is characterized by BET, SEM, TEM, XRD, FT-IR, TGA, and zeta potential. The maximum uptake (284 mg g-1) of Cadmium (II) ion is obtained at pH 6. The thermodynamics parameters like ∆G, ∆H, ΔS are found to be -17.42 kJmol-1, 6.49 kJ mol-1, and 55.66 Jmol-1K-1 respectively, revealing that the adsorption mechanism is endothermic, spontaneous, and feasible. The experimental data follows the D-R and Langmuir models well. The mass transfer is controlled by pseudo 2nd order kinetics. Furthermore, the density functional theory simulations demonstrate that the activated carbon strongly interacted with the Cd (II) ion through its various active sites. The adsorption energy noted for all interactive sites is highly negative (-0.45 eV to -10.03 eV), which shows that the adsorption process is spontaneous and stable which is in agreement with the experimental thermodynamics analysis.

Due to the continuing high suicide rates among young men, there is a need to understand help-seeking behaviour and engagement with tailored suicide prevention interventions. The aim of this study was to compare help-seeking among younger and older men who attended a therapeutic centre for men in a suicidal crisis. In this case series study, data were collected from 546 men who were referred into a community-based therapeutic service in North West England. Of the 546 men, 337 (52%) received therapy; 161 (48%) were aged between 18 and 30 years (mean age 24 years, SD=3.4). Analyses included baseline differences, symptom trajectories for the CORE-34 Clinical Outcome Measure (CORE-OM) and engagement with the therapy. For the CORE-OM there was a clinically significant reduction in mean scores between assessment and discharge (p<0.001) for both younger and older men. At initial assessment, younger men were less affected by entrapment (46% v 62%; p=.02), defeat (33% v 52%; p=.01), not engaging in new goals (38% v 47%; p=.02), and positive attitudes towards suicide (14% v 18%; p=.001) than older men. At discharge assessment, older men were significantly more likely to have an absence of positive future thinking (15% v 8%; p=0.03), have less social support (45% v 33%; p=.02) and feelings of entrapment (17% v 14%; p=.02) than younger men. Future research needs to assess the long-term effects of help-seeking using a brief psychological intervention for young men in order to understand whether the effects of the therapy are sustainable over a period of time following discharge from the service.

Substantial research is required to ensure that micro-mobility ride sharing provides a better fulfillment of user needs. This study proposes a novel crowdsourcing model for the ride-sharing system where light vehicles such as scooters and bikes are crowdsourced. The proposed model consists of three entities: suppliers, customers, and a management party responsible for receiving, renting, booking, and demand matching with offered resources. It can allow suppliers to define the location of their private e-scooters/e-bikes and the period of time they are available for rent. Using a dataset of over 9 million e-scooter trips in Austin, Texas, we ran an agent-based simulation six times using three maximum battery ranges (i.e., 35, 45, and 60 km) and different numbers of e-scooters (e.g., 50 and 100) at each origin. Computational results show that the proposed model is promising and might be advantageous to shift the charging and maintenance efforts to a crowd of suppliers.

Modern agent-based models (ABM) and other simulation models require evaluation and testing of many different parameters. Managing that testing for large scale parameter sweeps (grid searches) as well as storing simulation data requires multiple, potentially customizable steps that may vary across simulations. Furthermore, parameter testing, processing, and analysis are slowed if simulation and processing jobs cannot be shared across teammates or computational resources. While high-performance computing (HPC) has become increasingly available, models can often be tested faster through the use of multiple computers and HPC resources. To address these issues, we created the Distributed Automated Parameter Testing (DAPT) Python package. By hosting parameters in an online (and often free) "database", multiple individuals can run parameter sets simultaneously in a distributed fashion, enabling ad hoc crowdsourcing of computational power. Combining this with a flexible, scriptable tool set, teams can evaluate models and assess their underlying hypotheses quickly. Here we describe DAPT and provide an example demonstrating its use.

Due to the continuing high suicide rates among young men, there is a need to understand help-seeking behaviour and engagement with tailored suicide prevention interventions. The aim of this study was to explore help-seeking behaviour and engagement for young men aged 18 to 30 years who attended a therapeutic centre for men in a suicidal crisis. In this prospective cohort study, data were collected from 546 men who were referred into a community-based therapeutic service in North West England. Of the 546 men, 337 (52%) received therapy; 161 (48%) were aged between 18 and 30 years (mean age 24 years, SD=3.4). One third (n=54; 34%) of the men were seen within 48 hours of their referral. Analyses included baseline differences, symptom trajectories for the CORE-34 Clinical Outcome Measure (CORE-OM) and engagement with the therapy. For the CORE 34 there was a clinically significant reduction in mean scores between assessment and discharge (p<0.001), with all outcomes demonstrating a large effect size. Future research needs to assess the long-term effects of help-seeking using a brief psychological intervention for young men in order to understand whether the effects of the therapy are sustainable over a period of time following discharge from the service.

It’s always a challenge for a teacher to get their students to be more engaged or active in the classroom. Engagement happens when students are interested in the subject, have fun, and feel welcome in the classroom. But how do we make students more engaged? To make this happen, Educational escape rooms were introduced into studies. In this paper, we will discuss about the creation and evaluation of educational escape rooms within an engineering learning context. As part of our research project, four educational escape rooms were created for students and surveys were conducted among them to evaluate the success of our project. Our findings indicate that the escape room learning model is well accepted by the students. As a result of the activity, high levels of dedication and enthusiasm are recorded and students shows the eagerness to do more escape room activities.

In some parts of Nigeria, many girls do not attend school, and among those sent to school, many still drop out early. This and other socio-cultural factors affect girls psychologically. There is no doubt that girls need consistent love and tutoring to guide them through the turbulent teen years and beyond. They need a mentor who acts as a friend and a role model. The Mobile-based Mentoring Platform seeks to leverage on mobile technology's affordances to focus on the needs of the girl-child, such as improvement in academic achievement, guidance in career choice, development of self-concept, and esteem. The girl-mentees comments revealed that using the platform provided them frequent access to mentors and access to learning opportunities. The challenges they faced include epileptic internet network, intrusions by parents, and others. Therefore, this paper examined the challenges and benefits of mentoring girls via a mentoring platform.

Course-based undergraduate research experiences (CUREs) provide students with opportunities for the same gains that apprenticed research with faculty members offer. As their popularity increases, it is important that critical elements of CUREs are supported by thoughtful design. Student experiences in CUREs can provide important insights into why CUREs are so effective. We present evidence from students who participated in CUREs at the introductory, intermediate, and advanced levels, as well as from graduate teaching assistants for an introductory lab course that included a CURE. Students and teaching assistants describe repetition as a valuable element in CUREs and other laboratory experiences. We used student work and open-ended interviews to identify which of five previously described elements of CUREs students found important. Because repetition was particularly salient, we characterized how students described repetition as they experienced it in courses that contained full-length or “micro”-CUREs. In prompted interviews, students described how repetition in CUREs provided cognitive (learning concepts) and practical (learning technical skills) value. Recent graduates who had participated in CUREs at each level of their Biology education were particularly aware that they placed value in repetition and acknowledged it as motivational in their own learning. Many students described repetition in metacognitive terms, which also suggests that as students advance through laboratory and CURE curricula, their understanding of how repetition supports their learning becomes more sophisticated. Finally, we integrated student descriptions to suggest ways in which repetition can be designed into CUREs or other laboratory courses to support scientific learning and enhance students’ sense of scientific identity.

Starting from the importance of risk perception for taking certain preventive measures to protect people and their property from disasters, the subject of the research is to examine the factors influencing public perception of mythically-based human behavior in disaster conditions. Using the random sampling method, 250 adult respondents were surveyed in the city of Belgrade, using a specially created and adapted survey questionnaire. The results of the research show that there is no statistically significant influence of gender, age, educational and economic factors on the public perception of human behavior in disaster conditions. The results of the research can be used to improve strategies and campaigns based on risk assessment, aimed at improving the safety of people in disasters.

High levels of meat consumption are increasingly being criticised for ethical, environmental, and social reasons. Plant-based meat substitutes have been identified as healthy sources of protein in comparison to meat. This alternative offers several social, environmental and health benefits and may play a role in reducing meat consumption. However, there has been a lack of research on how specific meat substitute attributes can influence consumers to replace or partially replace meat in their diets. Research demonstrates that in many countries consumers are highly attached to meat. They consider it as an essential and integral element of their daily diet. For these consumers which are not interested in vegan or vegetarian alternatives to meat, so-called meathybrids could be a low-threshold option for a more sustainable food consumption behaviour. In meathybrids only a fraction of the meat product (e.g. 20% to 50%) is replaced with plant-based proteins. In this paper, the results of an online survey with 501 Belgium consumers are presented with focus on preferences and attitudes relating to meathyrids. The results show that more than fifty percent of consumers substitute meat at least occasionally. Thus, about half of the respondents reveal an eligible consumption behaviour in respect to sustainability and healthiness to a certain degree. Concerning the determinants of choosing either meathybrid or meat it becomes evident that a strong effect is exerted by the health perception. The healthier meathybrids are perceived, the higher is the choice probability. Thus, this egoistic motive seems to outperform altruistic motives like animal welfare or environmental concerns when it comes to choice for this new product category.

High levels of meat consumption are increasingly being criticised for ethical, environmental, and social reasons. Plant-based meat substitutes have been identified as healthy sources of protein that, in comparison to meat, offer a number of social, environmental and health benefits and may play a role in reducing meat consumption. However, there has been a lack of research on the role they can play in the policy agenda and how specific meat substitute attributes can influence consumers to replace partially replace meat in their diets.

High levels ofmeat consumption are increasingly being criticised for ethical, environmental, 2 and social reasons. Plant-based meat substitutes have been identified as healthy sources of protein in 3 comparison to meat. This alternative offers several social, environmental and health benefits and may 4 play a role in reducing meat consumption. However, there has been a lack of research on how specific 5 meat substitute attributes can influence consumers to replace or partially replace meat in their diets. 6 Research demonstrates that in many countries consumers are highly attached to meat.They consider 7 it as an essential and integral element of their daily diet. For these consumers which are not interested 8 in vegan or vegetarian alternatives to meat, so-called meathybrids could be a low-threshold option 9 for a more sustainable food consumption behaviour. In meathybrids only a fraction of the meat 10 product (e.g. 20% to 50%) is replaced with plant-based proteins. In this paper, the results of an online 11 survey with 500 German consumers are presented with focus on preferences and attitudes relating 12 to meathyrids. The results show that more than fifty percent of consumers substitute meat at least 13 occasionally. Thus, about half of the respondents reveal an eligible consumption behaviour in respect 14 to sustainability and healthiness to a certain degree. Concerning the determinants of choosing either 15 meathybrid or meat it becomes evident that the highest effect is exerted by the health perception. The 16 healthier meathybrids are perceived, the higher is the choice probability. Thus, this egoistic motive 17 seems to outperform altruistic motives like animal welfare or environmental concerns when it comes 18 to choice for this new product category.

Latin binomials, popularised in the eighteenth century by the Swedish naturalist Linnaeus, have stood the test of time in providing a stable, clear and memorable system of nomenclature across biology. However, relentless and ever-deeper exploration and analysis of the microbial world has created an urgent unmet need for huge numbers of new names for Archaea and Bacteria. Manual creation of such names remains difficult and slow and typically relies on expert-driven nomenclatural quality control. Keen to ensure the legacy of Linnaeus lives on in the age of microbial genomics and metagenomics, we propose an automated approach, employing combinatorial concatenation of roots from Latin and Greek to create linguistically correct names for genera and species that can be used off the shelf as needed. As proof of principle, we document over a million new names for Bacteria and Archaea. We are confident that our approach provides a road map for how to create new names for decades to come.

Universitas Sebelas Maret (UNS) through SMART UNS Company has conducted research and development of e-motorcycle conversion using Li-ion battery pack as a substitute for ICE energy source from the conventional motorcycle. Currently, the battery-pack that used for e-motorcycle conversion is in the development phase towards commercialization. The challenge of estimating production costs is the complicated production process and storing hidden expenses that can be a problem. This hidden cost is often a missing or varied factor that costs less or more expensive. This study presents an integrated parametric cost estimation model with activity-based cost assignments to estimate production costs through cost calculations for each activity. Activity-based costs break the production process into a specific cost element for each step. Each activity's cost is put into a parametric cost estimation model to calculate the cost of each activity into the total cost of production. Cost estimation results will be analyzed using a regression method to determine which variables most affect the production cost of Li-ion battery packs for the conversion of e-motorcycles in the SMART UNS company.

The complexity of the design in high-rise residential projects is a challenge for the construction industry in completing projects that fit the needs of users. Performance-Based Building Design (PBBD) appears as a design concept that can describe these needs into performance requirements. In this case designing a building can be considered as an iterative process of exploration, where desired functional properties can be created, the shapes are suggested, and evaluation processes is used, so as to bring together the shapes and functions of the building. This concept is a container for designers to produce high-performance buildings. This study aimed to identify the performance-based building design factors applied by architect designers and engineers in high-rise residential building in Surabaya. As part of this study, primary data was collected based on surveys conducted through observation and questionnaire distributed to designers who had or were involved in the high-rise residential design process in Surabaya. A total of sixty-eight respondents were included in this study. Descriptive analysis through a mean and standard deviation scatter plot was used to rank the application of PBBD. Meanwhile, factor analysis was used in the analysis of PBBD application factors. From the results of the analysis, four factors were obtained for the application of PBBD in high-rise residential buildings in Surabaya, namely; the interests of occupants, the sustainability of building operations, the design collaboration process, and the risk of loss. Future research is the influence relationships and measure the success model of PBBD at a higher level into BIM (Building Information Modeling) interoperability.

Coronavirus, also known as COVID-19, has been declared a pandemic by the World Health Organization (WHO). At the time of conducting this study, it had recorded over 1.6 million cases while more than 105,000 have died due to it, with these figures rising on a daily basis across the globe. The burden of this highly contagious respiratory disease is that it presents itself in both symptomatic and asymptomatic patterns in those already infected, thereby leading to an exponential rise in the number of contractions of the disease and fatalities. It is therefore crucial to expedite the process of early detection and diagnosis of the disease across the world. The case-based reasoning (CBR) model is an effective paradigm that allows for the utilization of cases’ specific knowledge previously experienced, concrete problem situations or specific patient cases for solving new cases. This study therefore aims to leverage the very rich database of cases of COVID-19 to solve new cases. The approach adopted in this study employs the use of an improved CBR model for state-of-the-art reasoning task in classification of suspected cases of Covid19. The CBR model leverages on a novel feature selection and semantic-based mathematical model proposed in this study for case similarity computation. An initial population of the archive was achieved with 68 cases obtained from the Italian Society of Medical and Interventional Radiology (SIRM) repository. Results obtained revealed that the proposed approach in this study successfully classified suspected cases into their categories at an accuracy of 97.10%. The study found that the proposed model can support physicians to easily diagnose suspected cases of Covid19 base on their medical records without subjecting the specimen to laboratory test. As a result, there will be a global minimization of contagion rate occasioned by slow testing and as well reduce false positive rates of diagnosed cases as observed in some parts of the globe.

Visualization of the seabed terrain is one of the key functions of marine geographic information system. The major challenge here is that the obtained data for seabed terrain usually consists of elevation and sediment only but does not include remote sensing images, which is important for ground terrain visualization, as they can be used as textures to reveal detailed information and achieve realistic visual results. Existing seabed terrain visualizing methods (including annotations, color-mapping, and texture-mapping) have limitations in reality and intuition, as they are inadequate to express the physical characteristics of sediment accurately. This paper presents a novel and advanced 3D visualization method of seabed terrain, which introduces the Physically Based Rendering (PBR) theory into the field of geographic visualization. We analyze the main categories of seabed sediments and their optical features respectively, then develop a procedural method to generate physically based rendering materials for different sediments. Then an enhanced bidirectional reflectance distribution function is employed to achieve accurate and intuitive terrain rendering. We also refine the texture sampling method and propose a procedural seabed objects generation method to construct a more natural and realistic undersea environment. Experimental results reveal our method can make good use of the limited seabed terrain data and get significant improvements in visual effect, which can help users to cognize and analyze the seabed geographic environment more accurately and intuitively.

The microstructure and solidification behavior of nickel based GTD222 superalloy at different cooling rates are studied. The solidification of the GTD222 superalloy proceeds as follows: L→L+γ, L→L+γ+MC, L→L+(γ/γ ′)-Eutectic and L→η phase. The temperature of liquidus of GTD222 superalloy is 1360 °C while the solidus is slightly lower at 1310 °C, which due to the alloying elements redistribution. It was found that the dendrite arm spacing of the alloy decreased with the increase of cooling rate (From 200 μm at 2.5 K/min to 100 μm at 20 K/min).

Previously, we described the initial use of Flipped Team‐Based learning (FTBL) defined as TBL approach combined with flipped classroom learning methodology, in which students previewed online lectures and applied their knowledge in different in-class activities. The purpose of the present study is to review the progress within this approach and to investigate how constant changes in team allocation can affect student’s perception regarding this modified FTBL approach. Although students showed reluctance initially to get out of their ‘comfort zone’, our findings show that learners perceived the adoption of the continued random allocation, and became accustomed to this learning approach, which finally assisted them to enhance their team-work skills and classroom performance, to develop their reflective capabilities as well as improving their rapport building skills, learning and academic performance. Learners also believed that this learning strategy that creates critical incidents can simulate their future work environment as they might be expected to work in unfamiliar situations. Therefore, the present study indicated strong support for the modified FTBL method and was seen to work exceptionally well, despite some minor problems that students can experience working in a team and/or with different teammates in every session.

The effect of microstructure and chemistry of passive films on the kinetics of passive layer growth and passivity breakdown of some Ti-based alloys, namely Ti-6Al-4V, Ti-6Al-7Nb and TC21 alloys was studied. The rate of pitting corrosion was evaluated using cyclic polarization measurements. Chronoamperometry was applied to assess the passive layer growth kinetics and breakdown. Microstructure influence on the uniform corrosion rate of these alloys was also investigated employing Tafel extrapolation and dynamic electrochemical impedance spectroscopy. Corrosion studies were performed in 0.9% NaCl solution at 37 oC, and the obtained results were compared with ultrapure Ti (99.99%). The different phases of the microstructure were characterized by X-ray diffraction and scanning electron microscopy. Chemical composition and chemistry of the corroded surfaces were studied using X-ray photoelectron analysis. For all studied alloys, the microstructure consisted of α matrix, which was strengthened by β phase. The highest and the lowest values of the β phase’s volume fraction were recorded for TC21 and Ti-Al-Nb alloys, respectively. The uniform corrosion rate and pitting corrosion resistance (R_pit) of the studied alloys were enhanced following the sequence: Ti-6Al-7Nb < Ti-6Al-4V << TC21. The corrosion resistance of Ti-Al-Nb alloy approached that of pure Ti. The obvious changes in the microstructure of these alloys, together with XPS findings, were adopted to interpret the pronounced variation in their corrosion rates.

Bangladeshi construction industry suffers a lot of safety and accidental issues than other developing countries in the world. Among many of these, accident of construction project goes far beyond and shape a horrific figure of death for every year. The aims of this study is that analysis and discussion of causes of accident at construction project in Bangladesh. A widespread statistical data collection and data analysis take place to identify the causes and design the questionnaire. The questionnaire-based survey was used to elicit the attitude of four stakeholders as workers, owners, consultants, and contractors towards passive causes of fatal accident at construction site. These study also identify 77 passive causes under 14 major groups and ranked them based on Relative Importance Index (RII). The top 5 major group of causes are (1) Management related, (2) Consultant related, (3) Technology related, (4) Labour related and (5) Contractor related. The top 5 passive causes are: (1) Unaware of safety-related issue, (2) Lack of personal protective equipment, (3) Lack of safety eliminating/ avoiding design, (4) Unfit equipment, (5) Lack of knowledge and training on equipment.

Portfolio weights solely based on risk avoid estimation error from the sample mean, but they are still affected from the misspecification in the sample covariance matrix. To solve this problem, we shrink the covariance matrix towards the Identity, the Variance Identity, the Single-index model, the Common Covariance, the Constant Correlation and the Exponential Weighted Moving Average target matrices. By an extensive Monte Carlo simulation, we offer a comparative study of these target estimators, testing their ability in reproducing the true portfolio weights. We control for the dataset dimensionality and the shrinkage intensity in the Minimum Variance, Inverse Volatility, Equal-risk-contribution and Maximum Diversification portfolios. We find out that the Identity and Variance Identity have very good statistical properties, being well-conditioned also in high-dimensional dataset. In addition, the these two models are the best target towards to shrink: they minimise the misspecification in risk-based portfolio weights, generating estimates very close to the population values. Overall, shrinking the sample covariance matrix helps reducing weights misspecification, especially in the Minimum Variance and the Maximum Diversification portfolios. The Inverse Volatility and the Equal-Risk-Contribution portfolios are less sensitive to covariance misspecification, hence they benefit less from shrinkage.

Some contaminants of emerging concern (CECs) are known to survive conventional wastewater treatment plants, which introduce them back to the environment and can potentially cycle up in drinking water supplies. This is especially concerning because of the inherent ability of some CECs to induce physiological effects in humans at very low doses. Advanced oxidation processes (AOPs) such as TiO2 based photocatalysis are of prominent interest for addressing CECs in aqueous environments. Natural water resources often contain dissolved metal cations concentrations in excess of targeted CEC concentrations. These cations may significantly, adversely impact degradation of CECs by scavenging TiO2 surface generated electrons. Consequently, simple pseudo first order or Langmuir-Hinshelwood kinetics are not sufficient for reactor design and process analysis in some scenarios. Rhodamine B dye and dissolved copper cations were studied as reaction surrogates to demonstrate that TiO₂ catalyzed degradation for very dilute solutions is very nearly completely due to homogeneous reaction with hydroxyl radicals and that in this scenario the hole trapping pathway has negligible impact. Chemical reaction kinetic studies were then carried out to develop a robust model for RB/metal reactions that is exact in the electron pathways for hydroxyl radical production and metal scavenging.

To date, several independent methods and algorithms exist exploiting constraint-based stoichiometric models to find metabolic engineering strategies that optimize microbial production performance. Optimization procedures based on metaheuristics facilitate a straightforward adaption and expansion of engineering objectives as well as fitness functions, while being particularly suited for solving problems of high complexity. With the increasing interest in multi-scale models and a need for solving advanced engineering problems, we strive to advance genetic algorithms, which stand out due to their intuitive optimization principles and proven usefulness in this field of research. A drawback of genetic algorithms is that premature convergence to sub-optimal solutions easily occurs if the optimization parameters are not adapted to the specific problem. Here, we conducted comprehensive parameter sensitivity analyses to study their impact on finding optimal strain designs. We further demonstrate the capability of genetic algorithms to simultaneously handle (i) multiple, non-linear engineering objectives, (ii) the identification of gene target-sets according to logical gene-protein-reaction associations, (iii) minimization of the number of network perturbations, and (iv) the insertion of non-native reactions, while employing genome-scale metabolic models. This framework adds a level of sophistication in terms of strain design robustness, which is exemplarily tested on succinate overproduction in Escherichia coli.

Background: Few studies have investigated the longitudinal association between cervical spondylosis (CS) and migraine by using a nationwide population-based database. Methods: We conducted a retrospective cohort study from 2000 to 2011 identifying 27,930 cases of cervical spondylosis and 111,720 control subjects (those without cervical spondylosis) from a single database. The subjects were frequency-matched on the basis of sex, age, and diagnosis date. The non- cervical spondylosis cohort was four times the size of the cervical spondylosis cohort. To quantify the effects of cervical spondylosis on the risk of migraine, univariate and multivariate Cox proportional hazard regression analyses were used to calculate the hazard ratio (HR) and 95% confidence interval (CI). Results: After a 10-year follow-up controlling for potential confounding factors, overall migraine incidence was higher in the cervical spondylosis cohort than in the non- cervical spondylosis cohort (5.16 and 2.09 per 1,000 people per year, respectively; crude hazard ratio = 2.48, 95% confidence interval = 2.28–2.69) with an adjusted hazard ratio of 2.03 (95% confidence interval = 1.86–2.22) after accounting for sex, age, comorbidities, and medication. Individuals with myelopathy in the cervical spondylosis cohort had a 2.19 times (95% confidence interval = 1.80–2.66) higher incidence of migraine compared than did those in the non- cervical spondylosis cohort. Conclusion: Individuals with cervical spondylosis exhibited a higher risk of migraine than those without cervical spondylosis. The migraine incidence rate was even higher among individuals with cervical spondylotic myelopathy.

This paper outlines evidence-based practice in the context of professionalism, and highlights the contribution evidence-based practice can make to the professional practice of higher education course managers. Implications of the changing HE landscape for the status of academics as professionals are reviewed, and evidence-based practice is proposed as a solution for both enhanced course management and to remedy perceived deprofessionalisation. Finally, questions regarding researching professional practice within one’s own institution are addressed.

A comprehensive kinetic model of the Fischer-Tropsch synthesis (FTS) is developed in a fixed bed reactor under operating conditions (temperature, 230–235°C, pressure, 20–25 bar, gas hourly space velocity, 4000–5000 cm³(STP)/h/g_catalyst ,H₂/CO feed molar ratio, 2.1) over a Co based catalyst. Reaction rate equations based on Eley-Rideal (ER) type model for initiation step and Langmuir-Hinshelwood-Hougen-Watson (LHHW) type model for propagation and termination steps of the FTS reactions have been considered and the readsorption of olefins were taken into account. The model that was reported in the literature was modified in order to explain many significant deviations from the ASF distribution. Optimum parameters have been obtained by Genetic Algorithms (GA). The calculated activation energies to produce n-paraffins and 1-olefins were in the range of 82.24 to 90.68 kJ/mol and 100.66 to 105.24 kJ/mol, respectively. The hydrocarbon distribution in FTS reactions was satisfactorily predicted particularly for paraffins.

Decades of research suggest that Mindfulness-Based Stress Reduction (MBSR) training supports a greater capacity to live with chronic medical conditions and contributes to lowering stress levels. This paper introduces a model for a Mindfulness-Based Recovery from Stroke (MBRfS) for promoting stroke recovery, informed by the lived experience of the author (a stroke survivor and certified MBSR instructor), the research literature regarding MBSR training, and the specific challenges of stroke recovery. Four themes emerged from the autoethnographic analysis that informed the proposed model: Readiness to accept the stroke event and the acquired brain injury; Navigating uncertainties of stroke recovery with awareness and self-responsibility for outcomes; Trusting the inherent wisdom of the body as a stroke recovery “teacher”; and Increased capacity to integrate complex emotions with self-compassion, and a sense of wholeness. A four component MBRfS model is offered, which consists of an integration amongst a modified MBSR framework, emergent attitudinal themes, and insights from the autoethnographic vignettes. The MBRfS model offers a path for providing participants with a supportive experience within stroke recovery. Recommendations and suggestions for future studies are offered to support the development of MBRfS for stroke survivors and their caregivers, as well as contributing to health care providers.

Seroconversion surveys of anti-SARS-CoV-2 antibodies provide accurate estimates of the SARS-CoV-2 infection. This nationwide population-based cross-sectional serosurvey aimed to evaluate the prevalence of SARS-CoV-2 antibodies among residents in Gabon and compare the estimated cumulative number of COVID-19 cases with the officially registered number of laboratory-confirmed cases up to December 2021. Households in each province were randomly selected. Twenty-eight localities including 16 urban and 12 rural, were randomly selected to participate in the study. Whole blood samples were collected in dry tubes from all study participants around the country within 15 days. Serum samples were used to measure the total Immunoglobulin antibodies. Overall, data of 1672 households were analyzed. Out of the 3659 participants, 3175 were found positive for SARS-CoV-2 antibodies, resulting in a crude seroprevalence of 86.77%. Stratification of study participants by age group has shown highest seroprevalences in 20–29 and 40-49 age groups with 91.78% (95% CI:89.5–93.6) and 91.42% (95% CI:88.7–93.5), respectively. Nyanga province had the lowest prevalence (72,8%), and Estuaire and Ogoué-Lolo provinces had the highest prevalence (90 and 92%, respectively). Our results suggest a high transmission rate in the Gabonese population, 21 months after the first SARS-CoV-2 case in the country. This high seroprevalence estimate could indicate that the applied infection control measures may not have been adequately implemented or appropriately adhered to by the population.

Work has been undertaken in healthcare sector to explore ways of co-produce design responses with different communities, and organisations. However, we lack empirical analysis of how design thinking can help tackle complexity. To assist the (anonymised for peer review) programme, we curated the Ripple Framework to develop trust and attempt to address the challenges of complexity in nursing. Through a generative design process data was used to collaboratively define bespoke co-design pathways with 31 participants from six Scottish care providers over ten months. Thematic, content and matrix analyses produced insights to inform vignettes illustrating how design responded to complex social care sector needs, with a particular focus on fulfilment and flourishing of the care workforce. Drawing on our empirical material and using the Design Research Value Model (Rodgers et al.), we illustrate how we have developed care's social, cultural, and economic value, through co-design, this way contributing to strategies to address the care crisis.

I examine national environmental security policy cultures to assess the opportunities for increasing global environmental security. The question is whether the difficulties in modeling the state's ecological security are a consequence of limitations in the coherence of the four dogmas: ecological security, sustainable development, social responsibility and environmental management. The presented fragments of theoretical research explain the question by presenting the logic of the constructive value of the national culture of ecological safety policy. I conducted empirical research based on 18 development strategies of regional cities in Poland. The multi-criteria method made it possible to identify and describe a micro-community reflecting the macroscopic observation of regional cities as an emerging whole of the state’s development. Assumption: ownership of the environmental aspects of cities is a natural quantity influencing the ecological security of the state in the contemporary global civilization system. I have formulated new definitions: ecological security of the state, culture of ecological security policy, sustainable development and socially responsible and sustainable development of the city. I have developed 13 catalogues of elements of the structure of the development strategy of regional cities in Poland, containing 1 390 public services. I have shown when there is a lack of culture of the state's ecological security policy in the global ecological security system according to the cause-effect principle. I have been conducting research since 2019.

In the knowledge era, intellectual capital has been considered a key factor in creating value within organisations. This study examines the relationships and interactions between the components of intellectual capital and the profitability of Panamanian banking, and financial institutions listed on the Latin American Stock Exchange (LATINEX) from 2014 to 2020. Utilising the Valued-Added Intellectual Coefficient (VAIC)™ model, which evaluates the intellectual capital of organisations based on information from financial statements, the study constructs a regression model to examine the relationship between the Return on Equity (ROE) and the components of the VAIC™. The findings confirm the study’s hypothesis, demonstrating that the Structural Capital Efficiency (SCE) and company size (SIZE) variables explain 57% of the variance in ROE for the analysed institutions. The results suggest that the Intellectual Capital (IC) of financial sector institutions listed on LATINEX is significantly influenced by the SCE coefficient, which shows a negative relationship, suggesting that investment in structural capital does not enhance profitability. On the other hand, larger institutions exhibited higher profitability during the study period.

Flood frequency analysis at large scales, essential for the development of flood risk maps, is hindered by the uncertainty in outputs of process-based hydrological models and the scarcity of gauge flow data. We develop a Bayesian hierarchical model (BHM) based on the Generalized Extreme Value (GEV) distribution for regional flood frequency analysis at high resolution across North America. Our model leverages annual maximum flow data from ≈20000 gauged stations and a dataset of 130 static catchment-specific covariates to predict extreme flows at all catchments over the continent as well as their associated statistical uncertainty. Additionally, a modification is made to the data layer of the BHM to include daily gauge discharge data when available, which improves the precision of the discharge level estimates. We validated the model using a hold-out approach and found that its predictive power is very good for the GEV distribution location and scale parameters and improveable for the shape parameter, which is notoriously hard to estimate. The resulting discharge return levels yield satisfying agreement when compared with available design peak discharge from various government sources. Assessment of the covariates’ contributions to the model also informs on the most relevant underlying factors influencing flood-inducing peak flows. The key covariates in our model are temperature-related bioindicators, the catchment drainage area and geographical location.

This qualitative study explores the role of supply chain partnerships in enhancing brand value through collaborative marketing efforts. By analyzing diverse cases from industries including consumer electronics, apparel, automotive, and food and beverage, the research examines how different forms of partnerships—strategic alliances, co-marketing, joint ventures, and supplier integrations—contribute to brand value. The study employed a multiple case study design, incorporating semi-structured interviews, document analysis, and participant observations to gather data. The findings reveal that these partnerships enable companies to leverage complementary strengths, resulting in enhanced innovation, product quality, sustainability, market reach, and ethical standards. Collaborative marketing strategies such as joint product launches, sustainable branding campaigns, and co-developed customer programs are identified as key drivers of brand value, effectively increasing brand awareness, customer loyalty, market share, and perceived quality. Despite challenges like coordination complexity, goal misalignment, cultural differences, and cost management issues, the benefits realized—such as improved brand image, faster time-to-market, and reduced costs—demonstrate the substantial value of effective supply chain partnerships. The study underscores the importance of strategic alignment between supply chain activities and brand objectives, highlighting that successful partnerships foster deeper consumer engagement and stronger market positions. This research provides actionable insights for companies seeking to optimize their supply chain collaborations to enhance brand value, offering a foundation for future studies and practical applications in supply chain management and marketing. The findings contribute to a deeper understanding of how supply chain partnerships can be strategically managed to drive brand excellence in a competitive market environment.

Recently, there appeared in this journal (Beh and Lombardo \textbf{2022}, {\it Symmetry}, 14, 1103) a paper that showed how to perform a correspondence analysis on a two-way contingency table where Bowker's statistic lies at the numerical heart of this analysis. Thus, we showed how this statistic can be used to visually identify departures from perfect symmetry. Interestingly, Bowker's statistic is a special case of the symmetry-version of the Cressie-Read family of divergence statistics. Therefore, this paper presents a new framework for visually assessing departures from perfect symmetry using a second-order Taylor series approximation of the Cressie-Read family of divergence statistics.

The production of Moringa oleifera capsules has emerged as a promising agricultural activity in Mexico, driven by the plant’s well-documented health and nutritional benefits. In response, farmers have begun producing Moringa oleifera as a dietary supplement, using artisanal methods with minimal production controls. This study aimed to estimate the processing times of the Moringa oleifera production system using simulation modeling with Arena® software, and to evaluate the economic feasibility of capsule production. Methodologically, it was approached as a case study in the state of Veracruz, processing times were estimated through systematic sampling and modeled with Arena simulation software. Three simulation scenarios were considered to select a technically and economically viable alternative for agricultural producers: one with a 200-capsule encapsulator (1E200C), another with two 200-capsule encapsulators (2E200C) and a third with an 800-capsule encapsulator (1E800C). For the initial diagnosis a research stay was conducted for 180 days, and the production capacity was set at 24,000 capsules due to raw material limitations. Results indicated that the 1E800C scenario reduced processing time by 60% compared to the1E200C scenario, and by 35% compared to the 2E200C scenario. Additionally, the 1E800C model required only 2 days (16 hours) of work, while the 2E200C required 4 days (32 hours), and the 1E200C required 7 days (56 hours). In terms of production costs per unit of 90 capsules, the 1E200C was 3.93 USD the 2E200C 3.64 USD and the 1E800C 3.45 USD The study concluded that due to raw material limitations, the company can produce 12,800 units per year of 90 capsules. It is recommended to adopt the 1E800C encapsulator, which would lower overall production costs by 12.23%, representing 0.48 USD per unit produced, resulting in an additional profit of 6,150.50 USD Over a five-year evaluation period, the benefit-cost ratio was 5.03, the NPV was 922,370.11 and the IRR was 42.09%, indicating that this type of agribusiness in Mexico is both technically and economically feasible.

This research explores the behaviors of Generation Z consumers in China, particularly focusing on their interaction with companies through social media for the joint creation of value. Adopting a qualitative methodology, the research initially constructs a scale for assessing co-creation of value on social media platforms. Subsequently, it delves into the motivational aspects of users' engagement in these co-creative activities. The study unveils a range of utilitarian and hedonic motivations that drive Generation Z's value co-creation actions on social media. Insights derived from the findings offer both theoretical and practical implications for the field.

Agarwood, a highly valuable fragrant wood of Aquilaria spp. has been widely used in perfumes, traditional medicine, religious rites and cultural activities. Due to the presence of aromatic and medicinal properties, the Agarwood has gained its economic importance in recent years. It has been providing livelihood and employment facilities to many people who are cultivating those. Owing to high demand and profitability, the people of Assam has started to cultivate Agarwood in a commercial manner in recent days. This study was conducted to examine the economic viability of Agarwood cultivation in Assam and to understand the problems of the cultivators to consider Agarwood cultivation as the primary source of income. The primary data were collected during the months of May and June, 2022 from 210 households using structured questionnaire. The cost-benefit analysis revealed that INR 100 of initial investment yields a net benefit of INR 623 which indicates that the return from the Agarwood cultivation among the cultivators are very high. Thus, the present study argues that the government should encourage the cultivators by providing the necessary support in the form of a legalized market, credit requirement, creating the awareness about the demand of Agarwood and making provision of training.

Due to combined climate and biodiversity crisis, the sustainable utilization of phytogenetic resources stands as one-way alternative while nutrient management strategies gain an increasing role in agriculture. Building on previous studies regarding the Endangered local endemic of Crete (Greece) Carlina diae (Asteraceae) with medicinal and ornamental value, this investigation focused on its pilot cultivation and fertilization (foliar or root application). Foliar application included chemical fertilizer (conventional) or integrated nutrient management (INM). Root application consisted of chemical fertilizer, biostimulant, or INM with biostimulant. Above-ground biomass content of nutrients, together with leaf chlorophyll fluorescence and colour parameters (SPAD meter, DA meter, Chroma Meter) were determined. The leaf content of chlorophyll, three key antioxidant compounds and minerals’ titers were also assessed. The fertilization scheme did not influence plant growth and visually perceived quality (leaf color and shape). Notably, foliar INM fertilization increased biomass partitioning to inflorescences (harvestable organ for either medicinal or ornamental purposes), and decreased tissue water content (facilitating processing). Considering all three antioxidants together, INM with biostimulant appeared the optimum scheme, being associated with the highest (carotenoids, phenolics) or the second highest (flavonoid) content. In C. diae, therefore, INM fertilization was optimal for upgrading yield (foliar) and herbal quality in terms of antioxidant profile (INM with biostimulant), which might be embraced as an eco-friendly approach for high quality yields.

The devastating effects of COVID-19 permeates virtually all aspects of life across geographic boundaries. As the lockdown is eased, and reinstated, across many parts of the world, attention is now shifting towards how to navigate the ‘now normal’ rather than the ‘next normal,’ of doing business with a view to achieving sustainable development. This study highlights some of the challenges and opportunities for micro, small, and medium enterprises (MSMEs) in times of crisis such as COVID-19. Conceptual by orientation, the study provides a broad overview of trends in crises times, drawing upon a range of qualitative accounts. The overarching message is the current direction of travel for MSMEs in sustaining their bottom-line, not after the crisis, but at this particular moment in time. The study highlights some implications for ‘pivoting,’ in order to cushion the impact of the pandemic on efforts to capacitate MSMEs in leveraging value co-creation with the consumers. The implications of the here and now are discussed.

Extreme value analysis (EVA) is well-established to derive hydrometeorological design values for infrastructure that has to withstand extreme events. Since there is evidence of increased extremes with higher hazard potential under climate change, alterations of EVA are introduced for which statistical properties are no longer assumed to be constant but vary over time. In this study, both stationary and non-stationary EVA models are used to derive design life levels (DLLs) of daily precipitation in the pre-alpine Oberland region of Southern Germany, an orographically complex region characterized by heavy precipitation events and climate change. As EVA is fraught with uncertainties, it is crucial to quantify its methodological impacts: two theoretical distributions (i.e., Generalized Extreme Value (GEV) and Generalized Pareto (GP) distribution), four different parameter estimation techniques, (i.e., Maximum Likelihood Estimation (MLE), L-moments, Generalized Maximum Likelihood Estimation (GMLE), and Bayesian estimation method) are compared. Discrepancies due to the parameter estimation methods may reach up to 45 % of the mean absolute value, while differences between stationary and non-stationary models are of the same magnitude (differences in design levels up to 40%). Despite the underlying large methodological uncertainties, there is a robust tendency for increased DLLs in the Oberland region towards the end of this century based on the (non-)stationary models.

Environmental concern has attained a higher level than in the past, with numerous organisations, including the pioneering "Green Banking" institution, expressing their concern. This study examines the relationship between green brand innovativeness and perceived value, as well as its effect on green brand loyalty. It expands on previous research that investigated the differences between innovation and innovativeness and their effects on brand loyalty. In addition, the role of perceived green value as a mediator and consumer green knowledge as a moderator in the formation of green brand loyalty is investigated. To test the conceptual model, a convenience-sampling survey of 600 Ethiopian customers was administered to capture a sample of respondents for the conceptual model. For data analysis, structural equation modelling (SEM) was employed. The results indicate that consumers' perceptions of green value have indirect effects on brand loyalty and direct effects on the innovativeness of green brands. In addition, green knowledge mediates the relationship between green brand innovation and green value perception in a significant way. Therefore, organisations should concentrate on enhancing consumers' environmental literacy and nurturing positive attitudes towards green brands in order to increase green brand loyalty.

Energy imports and the transition to renewable energy sources are of critical importance in the current geopolitical context, which necessitates concrete actions to tackle the energy crisis at the European Union level. The study aims to explore the impact of imported non-renewable energy resources on the EU-27 economy. It examines the correlations and causal relationships between GDP, GVA, R&amp;D investments, and energy imports from 2000 to 2021. Data normality was assessed using the Shapiro-Wilk test, while Pearson's test identified correlations between variables. Linear and multiple regression analyses were conducted to determine the effects of changes in independent variables on dependent variables. The study found a strong association between natural gas imports and GDP, with increases in GDP leading to a more than fourfold rise in imports. Furthermore, multiple regression analysis indicated that a 1% increase in R&amp;D investments results in a 2.21% decrease in fossil fuel imports in 91.7% of cases. This suggests that R&amp;D investments contribute to improved efficiency and the use of renewable energy sources.

Deep learning has been applied in many areas that have had a significant impact on applications that improves real-life challenges. The success of deep learning in a wide range of areas is due in part to the use of activation functions, which are particularly effective at solving non-linear problems. Activation functions are a key focus for researchers in artificial intelligence who aim to improve the performance of neural networks. This article provides a comprehensive explanation and comparison of different activation functions, with a focus on the arc tangent and its variations specifically. The paper presents experimental results that show that variations of the arc tangent using irrational numbers such as pi, the golden ratio, and Euler’s number, as well as a self-arctan function, produce promising results. Since we experimented with promising activation functions on two different problems, and datasets, we reached a result that different irrationals work well for different problems. In other words, arctan ϕ gives the best results mostly for multiclass classification and arctan e gives the best results for time series prediction problems. The paper focuses on a multiclass classification problem applied to the Reuters Newswire dataset and a time-series prediction problem on Türkiye energy trade value to show the impacts of activation functions.

Chicory, a horticultural crop cultivated worldwide, presents many botanical varieties and local biotypes. Among these, Italian radicchio group cultivars of pure Cichorium intybus L. and interspecific hybrids with Cichorium endivia L., as the “Red of Chioggia” biotype which in turn includes several phenotypes. This study deals with a pipeline for the marker-assisted breeding of F1 hybrids: it presents the genotyping-by-sequencing results of four elite inbred lines using a RADseq approach and an original molecular assay based on CAPS markers for screening mutants with nuclear male-sterility in radicchio of Chioggia. Two thousand nine hundred fifty-three SNP-carrying RADtags were identified and used to compute the actual estimates of homozygosity, and overall genetic similarity and uniformity of the populations, as well as to determine their genetic distinctiveness and differentiation. Molecular data were further used to investigate the genomic distribution of the RADtags among the two Cichorium species, allowing their mapping in 1,131 and 1,071 coding sequences in chicory and endive, respectively. In parallel, an assay to screen the genotype at the male-sterility locus Cims-1 was developed to discriminate wild-type and mutant alleles of the causative gene myb80-like. Moreover, a RADtag mapped close to this genomic region proved the potential application of this method for future marker-assisted selection tools. Finally, combining the genotype information of the core collection, the best ten individuals from each inbred line were selected to compute the observed genetic similarity as a measure of uniformity as well as the expected homozygosity and heterozygosity estimates scorable by the putative progenies derived from selfing (pollen parent) and full-sibling (seed parent) or pair-wise crossing (F1 hybrids). This predictive approach was conducted as a pilot study for understanding the potential application of RADseq in improving molecular breeding strategies aimed at the development of inbred lines and F1 hybrids in leaf chicory.

Rare diseases are characterized by a wide diversity of signs and symptoms and vary not only from disease to disease, but also from person to person, and living with a disease leads patients to peculiar experiences and treatments, without limits of time and space, as they extend to various environments and relationships of their lives. The objective of this study is the theoretical interaction between Value Co-creation (VC) and the Stakeholder Theory (ST) with the Shared Decision Making (SDM) health care theory. It is configured as a multiparadigmatic proposal by enabling the analysis of multiple perspectives of different stakeholders in health care. Thus, Co-created Decision Making (CDM) emerges in a logic dominated by service, with emphasis on intangible aspects and the interactivity of the relationships. It goes beyond the clinical office and the doctor-patient relationships, as studied in SDM, extending to all environments and interactions that add value to the patient's treatment. It was concluded that the essence of this new theory proposed here is neither in patient-centered care nor in patient self-care, but in co-created relationships with and between stakeholders in both directions, including non-health care environments that are important to the patient, such as relationships with friends, family, other patients with the same disease, social media, public policies, and the practice of pleasurable activities.

We examine a nonlinear initial value problem both singularly perturbed in a complex parameter and singular in complex time at the origin. The study undertaken in this paper is the continuation of a joined work with A. Lastra published in 2015. A change of balance between the leading and a critical subdominant term of the problem considered in our previous work is performed. It leads to a phenomenon of coalescing singularities to the origin in the Borel plane w.r.t time for a finite set of holomorphic solutions constructed as Fourier series in space on horizontal complex strips. In comparison to our former study, an enlargement of the Gevrey order of the asymptotic expansion for these solutions relatively to the complex parameter is induced.

We examine a family of linear partial differential equations both singularly perturbed in a complex parameter and singular in complex time at the origin. These equations entail forcing terms which combine polynomial and logarithmic type functions in time and that are bounded holomorphic on horizontal strips in one complex space variable. A set of sectorial holomorphic solutions are built up by means of complete and truncated Laplace transforms w.r.t time and parameter and Fourier inverse integral in space. Asymptotic expansions of these solutions relatively to time and parameter are investigated and two distinguished Gevrey type expansions in monomial and logarithmic scales are exhibited.

Background: Shared value creation in Base of the Pyramid (BoP) communities is a crucial process towards building sustainable societies. BoP communities in developing countries represent more than four billion people who live on low incomes with limited access to basic products and services. Current or emerging technologies offer promising solutions for organisations pursuing manufacturing opportunities in BoP communities. This study seeks to explore the literature on how BoP communities may become active participants in sustainably manufacturing products using micro-manufacturing factories. The research question posed is: What are the core concepts that need to be taken into consideration for creating shared value through micro-manufacturing factories in BoP communities? Method: A Systematised Literature review (SLR) was completed following the Preferred Reporting Items for Systematic reviews and Meta-Analysis (PRISMA) method for data selection criteria and analysis. The SLR is used to explore the state of literature with regards to creating manufacturing shared value in BoP communities with the objective to identify study gaps and to explore shared value creation concepts. Results: Literature indicates BoP initiatives that have pursued to engage BoP communities through various innovation strategies. The findings of the review is organised under three strategic pillars: Capability building strategy, Implementation process, and Growth strategy. The capability building strategy defines the users’ intention to create shared value in BoP communities with Micro-manufacturing factories (MMF). It is followed by the implementation process which guides the users to create manufacturing shared value in BoP communities. This is followed by a growth strategy to scale for impact.

The connection of two phenomena - non-conservative friction forces and dissipation-induced instability can lead to many interesting engineering problems. The paper studies general material-dependent damping influence on dynamical instability of disc brake systems leading to brake squeal. The effect of general damping is demonstrated on a minimal and complex model of a disc brake. A complex system including material-dependent damping is defined in the commercial finite element software. The finite element model validated by experimental data on the brake-disc test bench is used to compute the influence of a pad and a disc damping variations on system stability by complex eigenvalue analysis. Analyzes show a significant sensitivity of the experimentally verified unstable mode of the system to the ratio of the damping between the disc and the friction material components.

In this paper, the existence of two nontrivial stationary solutions for the nonlinear Gilpin Ayala two species competition model is given by using the mountain pass lemma, and the local stability criterion of the trivial solution is given by using Lyapunov function method. Based on the local stability criterion, we give some suggestions on how to avoid the population extinction. This is, when the population is on the verge of extinction, we should try our best to avoid the diffusion behavior and reduce the diffusion coefficient, otherwise the species are easy to go extinct. Numerical example shows the effectiveness of the proposed method.

Densimetric Froude (Fr) is the minimum velocity required to prevent sediment deposition in pipes. Prediction of Fr is of utmost importance in numerous applications in civil engineering. In this paper through using a new hybrid method. Genetic Algorithm (GA) is used for optimum selection of membership functions of Adaptive Neuro-Fuzzy Inference System (ANFIS), and Singular Value Decomposition (SVD) method is used to compute the linear parameters of ANFIS’s results section (ANFIS-GA/SVD). Also, two different target functions are known as training error (TE) and prediction error (PE) by Pareto curve, the trade-off between these functions is selected as the optimal modeling point. First, different models will be presented using the parameters affecting Fr prediction, classifying them in different groups; then the Fr parameter will be predicted for all the different models through utilizing three different sets of data and the ANFIS-GA/SVD technique. The results of the models indicate that the best Fr prediction is obtained when independent parameters such as volumetric sediment concentration (CV), ratio of median diameter of particle size to pipe diameter (d/D), ratio of median diameter of particle size to hydraulic radius (d/R) and overall friction factor of sediment (λs) use as input variables in prediction of Fr. A sensitivity analysis is also conducted for the purpose of examining the effect of each of the dimensionless parameters on Fr prediction accuracy. Comparing the results of the suggested models with the existing regression-based equations shows that ANFIS-GA/SVD (R²=0.986, MAPE=4.397, RMSE=0.206, SI=0.053, ρ=0.026, BIAS=-0.025) is more accurate than the rest of the models.

Growing acreage and changing consumer preferences cause increasing interest in the cereal products originating from organic farming. Lack of results of objective test, however, does not allow drawing conclusions about the effects of cultivation in the organic system and comparison to currently preferred conventional system. Field experiment was conducted in organic and conventional fields. Thirty modern cultivars of winter wheat were sown. They were characterized for disease infection including Fusarium head blight, seed sowing value, the amount of DNA of the six species of Fusarium fungi as well as concentration of ergosterol and trichothecenes in grain. The intensity Fusarium head blight was at a similar level in both systems. However, Fusarium colonization of kernels expressed as ergosterol level or DNA concentration was higher for the organic system. It did not reflect in an increased accumulation of trichothecenes in grain, which was similar in both systems, but sowing value of organically produced seeds was lower. Significant differences between analyzed cropping systems and experimental variants were found. The selection of the individual cultivars for organic growing in terms of resistance to diseases and contamination of grain with Fusarium toxins was possible. Effects of organic growing differ significantly from the conventional and grain obtained such way can be recommended to consumers. There are indications for use of particular cultivars bred for conventional agriculture in the case of organic farming, and the growing organic decreases plant stress resulting from intense fertilization and chemical plant protection.

Artificial general intelligence (AGI) progression metrics indicate AGI will occur within decades. No proof exists that AGI will benefit humans and not harm or eliminate humans. I propose a set of logically distinct conceptual components that are necessary and sufficient to 1) ensure various AGI scenarios will not harm humanity and 2) robustly align AGI and human values and goals. By systematically addressing pathways to malevolent AI we can induce the methods/axioms required to redress them. Distributed ledger technology (DLT, ‘blockchain’) is integral to this proposal, e.g. ‘smart contracts’ are necessary to address evolution of AI that will be too fast for human monitoring and intervention. The proposed axioms: 1) Access to technology by market license. 2) Transparent ethics embodied in DLT. 3) Morality encrypted via DLT. 4) Behavior control structure with values at roots. 5) Individual bar-code identification of critical components. 6) Configuration Item (from business continuity/disaster recovery planning). 7) Identity verification secured via DLT. 8) ‘Smart’ automated contracts based on DLT. 9) Decentralized applications - AI software modules encrypted via DLT. 10) Audit trail of component usage stored via DLT. 11) Social ostracism (denial of resources) augmented by DLT petitions. 12) Game theory and mechanism design.

This paper is focused on mapping the current evolution of Internet of Things (IoT) and its associated cyber risks for the Industry 4.0 (I4.0) sector. We report the results of a qualitative empirical study that correlates academic literature with 14 - I4.0 frameworks and initiatives. We apply the grounded theory approach to synthesise the findings from our literature review, to compare the cyber security frameworks and cyber security quantitative impact assessment models, with the world leading I4.0 technological trends. From the findings, we build a new impact assessment model of IoT cyber risk in Industry 4.0. We therefore advance the efforts of integrating standards and governance into Industry 4.0 and offer a better understanding of economics impact assessment models for I4.0.

Total Nigeria Plc is a Marketing and Services subsidiary of Total; a multinational energy company operating in more than 130 countries and committed to providing sustainable products and services for its customers. For over 50 years, Total Nigeria Plc has remained the leader in the downstream sector of the Nigerian oil and gas industry. This study investigated the volatility of the stock price of Total Petroleum Nigeria plc using nine (9) GARCH models namely sGARCH, gjrGARCH, eGARCH, iGARCH, aPARCH, TGARCH, NGARCH, NAGARCH and AVGARCH. We also investigated the Value-at-Risk (VaR) and Backtesting of the Models. The aim actually of this study is to boost the confidence of the shareholders and investors of the Total Nigeria plc. To achieve this, daily stock price for Total petroleum Nigeria plc from secondary was collected from January 2^nd 2001 to May 8^th 2017. . The study used both normal and student t innovations, using Akaike Information Criterion (AIC) to select the best model, for normal innovations for log returns and cleansed log returns of Total plc, the eGARCH and sGARCH models performed best respectively, while NGARCH model performed best for student t innovation for both log returns and cleansed returns of Total plc. The persistence of the models are stable except in few cases where iGARCH, eGARCH where not stable. Also for student t innovation, the sGARCH and gjrGARCH fails to converge. The mean-reverting number of day for the returns of Total Nigeria plc differs from model to model. Evidence from the VaR Analysis revealed from the selected models revealed that the Risk of VaR losses is high at 99% confidence level, slightly high at 95% confidence level and better at 90% confidence level. Although The Duration-Based Tests of independence conducted revealed that the models are correctly specified since in all cases the null hypotheses were accepted. This means that the probability of an exception on any day did not depends on the outcome of the previous day. Finally, both the unconditional (Kupiec) and conditional (Christoffersen) coverage tests for the correct number of exceedances for both Total stock returns and cleansed returns. The tests revealed rejection of the models at 1% level of significance. This confirms that unconditional (Kupiec) and conditional (Christoffersen) coverage tests for the correct number of exceedances are reliable compared to the Duration-Based Tests of independence. Therefore we recommend that shareholders and investors in Total Nigeria plc are to remain and continue to investment in Total Nigeria plc because if there is any form of losses, the price of the stock has the potentials to improve in the future. Again, though the risk is high at 99% confidence level, this in line with the financial theory that states that an asset with high expected risk would pay higher return on the average.

In this study, a mixed rule of degree of precision nine has been developed and implemented in the field of electrical sciences to obtain the instantaneous current in the RLC- circuit for particular value .The linearity has been performed with the Volterra’s integral equation of second kind with particular kernel . Then the definite integral has been evaluated through the mixed quadrature to obtain the numerical result which is very effective. A polynomial has been used to evaluate Volterra’s integral equation in the place of unknown functions. The accuracy of the proposed method has been tested taking different electromotive force in the circuit and absolute error has been estimated.

This study identifies the optimal management policy of a given energy storage system (ESS) installed in a grid-connected wind farm for maximizing the monetary benefits and provides guidelines for defining the economic value of the ESS under the optimal management policy and selecting the optimal size of the ESS based on the economic value. Considering stochastic models for wind power and electricity price, we develop a finite-horizon periodic-review Markov decision process (MDP) model to seek the optimal management policy. We also use a simple optimization model to find the optimal storage capacity and charging/discharging capacity of the ESS. By applying our analytic approach to a real-world grid-connected wind farm located in South Korea, we verify the usefulness of this study. Our numerical study shows that the economic value of the ESS is highly dependent on the management policy, wind electricity variability, and the electricity price variability. Thus, the optimal size of ESS should be carefully determined based on the locational characteristics and management policy even with limited investments. Furthermore, this study provides a meaningful policy implication on how much a subsidy the government should provide for installing ESS in a wind farm.

In this paper, by means of the Banach fixed point theorem and the Krasnoselskii's fixed point theorem, we investigate the existence of solutions for some fractional neutral functional integro-differential equations involving infinite delay. This paper deals with the fractional equations in the sense of Caputo fractional derivative and in the Banach spaces. Our results generalize the previous works on this issue. Also, an analytical example is presented to illustrate our results.

This paper presents a hybrid modelling approach that combines physics-based electromigration modelling (PEM) and statistical methods to evaluate the electromigration (EM) limits of nano-interconnects in mesh networks. The approach, which is also compatible with standard Place and Route (P&R) tools and practices, takes into account the positive impact of network redundancy on EM current limits. The study shows that conventional methods underestimate the EM current limits of a power delivery network (PDN) unit-cell by 80% due to their lack of consideration for redundancy. Additionally, the time-to-failure (TTF) distributions of a PDN unit-cell adhered to a lognormal distribution, where the lognormal sigma, σlogn, exhibits a 55% reduction compared to that of the single constituent interconnects. The study also found the negative voltage (i.e. ground or Vss) grid to be more susceptible to EM than the positive voltage, i.e. Vdd grid. In the examined grid unit-cell design, both the number of interconnect sites prone to voiding and also the magnitude of the peak tensile stress within the nano-interconnects were found to be 2-folds as high in the Vss case compared to Vdd. lognormal sigma of TFF for the grid unit-cells, σ_(logn-tile), show a marked reduction compared to the lognormal sigma of the constituent single interconnects, σ_logn, with a 50% and 66% decrease compared to single interconnects, for downstream (Vss) and upstream (Vdd), respectively. In addition, σ_(logn-tile) was 3-folds higher for downstream (Vss) compared to upstream (Vdd), whilst, in contrast this difference was only 2-folds at single interconnect level. 4.13-folds higher TTF50% was observed at grid unit-cell level for upstream compared to downstream operation which was also more pronounced than in the single interconnect level where the difference was only 2-folds. This research provides valuable insights into EM aging of nano-interconnects in mesh networks and could pragmatically enhance the accuracy of EM compliance evaluation methods.

Populations with healthcare needs often reside in post-conflict settings where basic services needed to maintain good health may be non-existent or hard to access. Therefore, there is a need for better identification and reallocation of resources as part of the post-conflict health rehabilitation effort. This study applies an asset-based approach to explore the more optimal design of health services and to identify the resource constraints for basic health service delivery to the most vulnerable communities in eastern Congo. We implemented the asset mapping in two phases. Firstly, we combined a qualitative survey with community walks to identify the assets already present in the communities. Secondly, we conducted group discussions to map out assets that are the core of Asset-Based Community Development (ABCD) practice. We finally documented all assets in a Community Asset Spreadsheet. Overall, 209 assets were identified as available and potentially valuable resources for the communities in eastern Congo. Among them, 60 were local associations, 24 were land and physical environment, 43 were local institutions, 46 were individuals, 32 to economy and exchange, and only 6 were related to culture, history, and stories. Drawing upon the findings from the qualitative survey, community walks, and group discussions, we conclude that an important number of resources were in place for basic health service delivery. By activating the existing and potential resources, the most vulnerable populations in eastern Congo might have the required resources for basic health service delivery. Our findings support the use of an asset-mapping research method as appropriate to identify existing and potential resources for basic health services in a post-conflict setting.

This paper proposes two max-pooling engines, named the RTB-MAXP engine and the CMB-MAXP engine, with a scalable window size parameter for FPGA-based convolutional neural network (CNN) implementation. The max-pooling operation for the CNN can be decomposed into two stages, i.e., a horizontal axis max-pooling operation and a vertical axis max-pooling operation. These two one-dimensional max-pooling operations are performed by tracking the rank of the values within the window in the RTB-MAXP engine and cascading the maximum operations of the values in CMB-MAXP engine. Both the RBM-MAXP engine and the CMB-MAXP engine were implemented using VHSIC Hardware Description Language (VHDL) and verified by simulations. They have been employed for and tested in our CNN accelerator targeting at the CNN model YOLOv4-CSP-S-Leaky for object detection.

A practical wind farm controller for production maximisation based on coordinated control is presented. The farm controller emphasises computational efficiency without compromising accuracy. The controller combines Particle Swarm Optimisation (PSO) with a turbulence intensity based Jensen wake model (TI-JM) for exploiting the benefits of either curtailing upstream turbines using coefficient of power ($C_P$) or deflecting wakes by applying yaw-offsets for maximising net farm production. First, TI-JM is evaluated using convention control benchmarking WindPRO and real time SCADA data from three operating wind farms. Then the optimized strategies are evaluated using simulations based on TI-JM and PSO. The innovative control strategies can optimise a medium size wind farm, Lillgrund consisting of 48 wind turbines, requiring less than 50 seconds for a single simulation, increasing farm efficiency up to a maximum of 6% in full wake conditions.

Traditional high pressure mechanical compressors account for over half of the car station’s cost, have insufficient reliability and are not feasible for a large-scale fuel cell market. An alternative technology, employing a two-stage, hybrid system based on electrochemical and metal hydride compression technologies, represents an excellent alternative to conventional compressors. The high-pressure stage, operating at 100-875 bar, is based on a metal hydride thermal system. A techno-economic analysis of the metal hydride system is presented and discussed. A model of the metal hydride system was developed, integrating a lumped parameter mass and energy balance model with an economic model. A novel metal hydride heat exchanger configuration is also presented, based on mini-channel heat transfer systems, allowing for effective high-pressure compression. Several metal hydrides were analyzed and screened, demonstrating that one selected material, namely (Ti_0.97Zr_0.03)_1.1Cr_1.6Mn_0.4, is likely the best candidate material to be employed for high-pressure compressors under the specific conditions. System efficiency and costs were assessed based on the properties of currently available materials at industrial levels. Results show that the system can reach pressures on the order of 875 bar with thermal power provided at approximately 150 °C. The system cost is comparable with the current mechanical compressors and can be reduced in several ways as discussed in the paper.

Nanomaterials have shown significant promise for enhancing the performance of composite materials and increasing their functionality for various industrial applications. This review explores the unique properties of nanomaterials, particularly carbon-based nanomaterials, and provides key findings in utilizing them to enhance composite performance. It highlights specific nano-based composite materials and their significant potential in advancing the field of nanocomposites. Challenges associated with nanocomposite production and utilization are also discussed, along with possible solutions to address them. Finally, the study provides recommendations for continued research and innovation in nanocomposites to fully unlock the benefits of these advanced materials for broader future applications.

The capacitated lot-sizing problem with product recovery (CLSP-RM) holds significant importance in reverse logistics but is notoriously complex (NP-hard). In this study, two techniques are introduced to confront this challenge. The first technique entails devising a linear optimization task that eliminates capacity limitations across a wide problem spectrum, yielding a remarkably accurate approximation of the optimal solution. This adaptable approach presents a potent alternative and holds potential for extension to diverse problem categories owing to its versatile nature. The second technique employs a simulation methodology utilizing Halton’s uniform random numbers to address the issue. This randomized production search method sidesteps considerations of production costs, inventory expenditures, and production order when determining production batches. The research’s novelty lies in its application of these techniques to the problem. The suggested methods undergo evaluation via a benchmark dataset of approximately 4200 instances, with comparison against solutions derived through the Gurobi solver. The results underscore the efficacy and resilience of the introduced methodology in tackling the CLSP-RM predicament.

The rapid proliferation of Internet of Things (IoT) technology has ushered in a new era of connectivity, allowing billions of devices to produce extensive data. Significant challenges in software engineering need to be addressed for full utilization of Internet of Things (IoT) applications. This article examines the challenges in Internet of Things, software engineering and discusses current developments aimed at addressing these issues and seizing new opportunities. We examine the challenges associated with Internet of Things software development, including resource constraints, device diversity, security vulnerabilities, and data management concerns. New studies have indicated the use of advanced techniques like as containerization, model-driven development, AI and ML integration, and robust security frameworks. Moreover, the significance of system architecture is explained, including the device, network, and cloud layers, with an emphasis on the principles of reusability, scalability, and modularity. Results and conversations explore the complexities of security measures, emerging opportunities, and scaling solutions made possible by simulation tools, penetration testing, and cross-domain development platforms. The study expects IoT system evolution and emphasises the need for continual software and firmware changes, testing, and deployment.

China’s greenhouse industry has thousands of years of development history, although the development of modern greenhouses has come late. After decades of development of China, its greenhouse industry is in the forefront of the world. China’s greenhouse industry is experiencing rapid development, transformation and upgrading. China ranks first in the world in terms of greenhouse area, used mainly for vegetable cultivation and plays an important role in the utilization of agricultural resources and food production. In 2023, the cumulative area of new greenhouses nationwide was 1835.87 million ha. In this paper we present the latest developments in the greenhouse sector. More specifically, we present a greenhouse market development overview, the greenhouse production, the greenhouse industry, and technology development. Current problems are underpinned, development opportunities and prospects are analyzed, and measures and specific proposals are detailed for the technological development of the greenhouse sector both for increasing product quantity and quality.

This study aimed to evaluate the effectiveness of decellularized nerves for promoting nerve regeneration by transplanting them from the sciatic nerve of a rabbit to that of a rat. The Sciatic nerves were harvested from New Zealand White Rabbits (n=4). A 1-cm segment of each nerve was decellularized by Sondell’s protocol and preserved at –4℃ in Roswell Park Memorial Institute (RPMI) 1640 medium for one week. Subsequently, a defect of a similar size was created in the sciatic nerves of rats. The decellularized nerves treated with detergent were then transplanted into these defects in the rats. The study included the three following groups: Group 1 (n=4) was the decellularized xenogeneic nerve group; Group 2 (n=7) was the negative control group in which the defect remained un-repaired; and Group 3 (n=5) was composed of the positive control group where the nerve was immediately transplanted from one rat to another. The sciatic functional index (SFI) was considered to evaluate the motor function by comparing it with the normal side at 1, 2, 3, and 4 weeks, and 1, 2, and 3 months postoperatively. Furthermore, electrophysiological and immunohistochemical assessments were conducted at 4 months. Immunohistochemically, at 16 weeks postoperative, the experimental group did not show statistically significant differences compared to controls in terms of schwann cell comparison, yet exhibited favorable outcomes when compared to the positive control group. Additionally, analysis of motor function test confirmed recovery of latency and nerve conduction velocity to levels similar to those of the normal side. While the nerve allograft demonstrated superior nerve regeneration in motor function test at 3 months, markedly low values were observed in all groups. When reconstructing peripheral nerves using detergent-based decellularized xenogenic nerves, analysis of immuno-histochemistry and motor nerve conduction study reveals a promising degree of nerve regeneration. However, when compared with fresh allograft group at 3 months after operation, the sciatic functional index was lower. Significantly lower values observed across all groups compared to previous assessments indicate the need for further research into potentially influential alternative factors.Histologically, at 16 weeks postoperative, the experimentally treated group did not show statistically significant differences compared to the controls in terms of a Schwann cell comparison, but exhibited favorable outcomes when compared to the positive control group. Additionally, an analysis of the motor function testing confirmed recovery of the latency and nerve conduction velocity to levels similar to those of the normal side. While the nerve allograft demonstrated superior nerve regeneration in the motor nerve examination at 3 months, notably low values were observed in all the groups. When reconstructing the peripheral nerves using detergent-based decellularized xenogeneic nerves, an analysis of immunohistochemistry and motor nerve conduction study reveals a promising degree of nerve regeneration. However, when compared with the fresh allograft group at 3 months post-operation, the sciatic functional index was lower. The significantly lower values observed across all groups compared to those of the previous assessments indicate the need for further research of potentially influential alternative factors.

Rubella infection is typically mild or asymptomatic except when infection occurs during pregnancy. Infection in early pregnancy can cause miscarriage, stillbirth, or congenital rubella syndrome. Only individuals that are still susceptible to rubella infection during child-bearing age are vulnerable to this burden. Rubella containing vaccine (RCV) is safe and effective, providing life-long immunity. However, average age-at-infection increases with increasing vaccination coverage, which could potentially lead to increased disease burden as well, if the absolute risk of infection during child-bearing age increases. Dynamics of rubella transmission were explored using EMOD, a software tool for building stochastic, agent-based infection models. Simulations of pre-vaccine, endemic transmission of rubella virus introduced RCV at varying levels of coverage to determine the expected future trajectories of disease burden. Introducing RCV reduces both rubella virus transmission and disease burden for a period of around 15 years. Increased disease burden is only possible more than a decade post-introduction, and only for contexts with low current burden and high transmission intensity. Low or declining rubella virus transmission intensity is concurrently associated with both greater disease burden and greater vaccine effectiveness. The risk of increasing burden through vaccination only exists for locations with persistently high infectivity, high connectivity, and high fertility. A trade-off between the risk of a small, future burden increase and a large, immediate burden decrease strongly favors RCV introduction.

Adaptation to the impacts of human induced global heating is inevitable. For a socially just and ecological sustainable adjustment to these new circumstances, we need to draw from diverse knowledge systems while, simultaneously, foster a social-ecological transformation. We approach these concerns through the concept of community-based adaptation (CBA) and discuss remedies. Synergies with feminist knowledge systems and indigenous ways of living show the transdisciplinary essence of CBA. By abstracting from its origin and overlapping disciplines, revealing the social metabolism as a common problem, CBA is prone to achieve more equitable and sustainable adjustments. Transdisciplinarity itself and the current related CBA literature point beyond mere adjustments and call for a redesign of the social metabolism, thereby shifting from adaptation to global heating towards adaptation with nature by focusing on social provisioning. An engagement with transformative adaptation and heterodox economics further shows the potential of CBA to serve as an instrument in support of a social-ecological transformation by addressing root causes of vulnerability and by fostering epistemic justice. Reflecting these points back on the epistemological and ontological assumptions of CBA, the viewpoint proposes critical realism as a guiding philosophy of science to move forward.

Opportunistic networks, an evolution of mobile Ad Hoc networks (MANETs), offer decentralized communication without relying on preinstalled infrastructure, enabling nodes to route packets through different mobile nodes dynamically. However, due to the absence of complete paths and rapidly changing connectivity, routing in opportunistic networks presents unique challenges. This paper proposes a novel probabilistic routing model for opportunistic networks, leveraging nodes' meeting probabilities to route packets towards their destinations. The model dynamically builds routes based on the likelihood of encountering the destination node, considering factors such as last meeting time and acknowledgment tables to manage network overload. Additionally, an efficient message detection scheme is introduced to alleviate high overhead by selectively deleting messages from buffers during congestion. Furthermore, the proposed model incorporates cross-layer optimization techniques, integrating optimization strategies across multiple protocol layers to maximize energy efficiency, adaptability, and message delivery reliability. Through extensive simulations, the effectiveness of the proposed model is demonstrated, showing improved message delivery probability while maintaining reasonable overhead and latency. This research contributes to the advancement of opportunistic networks, particularly in enhancing connectivity and efficiency for Internet of Things (IoT) applications deployed in challenging environments.

The numerical implementation of the controllers allows the use of very complex algorithms with ease. However, in practice, due to its proven advantages, the PID controller (and its variants) is widely used in industrial control systems as well as in many other applications that require continuous control. Most of the methods for tuning the parameters of PID controllers are based on time-invariant linear models of the processes, which in practice can lead to poor performance of the control system. The paper presents an application of reinforcement learning algorithms in tuning of PID controllers for the control of some classes of continuous nonlinear systems. Tuning the parameters of PID controllers is done with the help of Twin Delayed Deep Deterministic Policy Gradients (TD3) algorithm which presents a series of advantages compared to other similar methods from Machine Learning dedicated to continuous state and action spaces. TD3 algorithm is an off-policy Actor-Critic based method and was used as it does not require a system model. The presented technique is applied for control of a biotechnological system which has a strongly nonlinear dynamic. The proposed tuning method is compared to the classical tuning methods of PID controllers. The performance of the tuning method based on the TD3 algorithm is demonstrated through simulation illustrating the effectiveness of the proposed methodology.

Promoting the sustainable development of resource-based cities is of great significance to the ecological protection and high-quality development of the Yellow River Basin. Combining the environmental status and economic development, we objectively evaluate the ecological safety level of resource-based cities in the Yellow River Basin, compare and analysis the main factors affecting the ecological safety of different resource-based cities, and formulate precise and differentiated ecological safety protection measures in river basins to achieve high-quality development. Taking the Yellow River Basin as an example, this paper analyses the ecological level of the Yellow River Basin based on the theory of sustainable development, calculates the ecological safety level of 30 resource-based cities in the Yellow River Basin from 2006 to 2020 by TOPSIS model, and makes convergence analysis by classification. Through the DID empirical test of sustainable development planning policy on ecological safety factors, distinguish the development characteristics of different resource-based cities. The results show that: (1) the ecological safety level of resource-based cities in the Yellow River Basin is generally developing well, and there are differences among different types of resource-based cities; (2) the kinetic energy of sustainable development of resource-based cities in the Yellow River Basin is mainly industrial transformation, and the power of science and technology is insufficient; (3) local governments pay limited attention to environmental protection, and the sustainable development planning of resource-based cities in 2013 mainly promotes the adjustment of industrial structure of resource-based cities.

Use of MS Excel as a platform for teaching simple iterative solution of partial differential equations runs into issues of reliability of the computation because of the large number of calculations required. This article documents the problem and an empirical solution. The cause of this unreliability was found by detailed examination of the numerical results from three simultaneous iterations. Computers of several types from different manufacturers were found to fail occasionally in updating variables in the numerical iteration. A simple work-around is suggested and was tested on several platforms.

This work proposes a physics-based identification technique based on genetic algorithms. The main objective is to obtain a parametric matrix A that describes the time-invariant linear model of the longitudinal dynamics of an aircraft. This is achieved by proposing a fitness function based on the properties of the transition matrix and taking advantage of some of the capabilities of the genetic algorithm, mainly those of restricting the search ranges of the unknowns. In this case, such unknowns are related to the type of aircraft and flight conditions that are considered during the identification process. The proposed identification method is validated with a reliable nonlinear model that can be found in the literature, as well as with the calculation of the trim condition and linearization generally used in aircraft dynamics. In summary, this study suggests the genetic algorithm provided with the adequate fitness function, could be an appealing alternative for aircraft model identification, even when only a limited amount of data is available. Furthermore, in some cases, linearization using genetic algorithm can be more efficient than classical methods.

Public parks are a community resource with an important role in improving liveability, physical, and mental wellbeing. However, exercise facilities that are suitable for people with disabilities typically have been neglected in public park design. As such, people with disabilities often are unable to independently or safely use the park. To address this shortcoming, the objective of this paper was to employ a pragmatic research through designing process in developing the design for an inclusive park. We used a mixed-methods approach in the research that included review of previous studies, semi-structured interviews, and questionnaire surveys with stakeholders were applied as design integration. Persons with disabilities specifically were consulted to express their views on all matters of inclusive park design.

Background: Lung cancer is still the most lethal malignancy in the world from the report of Cancer Statistics in 2021. Platinum-based chemotherapy combined immunotherapy is the first-line treatment in lung cancer patients. However, the 5-year survival rate always affected by the adverse reaction and drug resistance caused by platinum-based chemotherapy. DNA damage and repair system is one of the important mechanisms which can affect the response to chemotherapy and clinical outcome in lung cancer patients. Objective: The objective of this study is to find the relationship between the polymorphisms of DNA repair genes with the prognosis in platinum-based chemotherapy in lung cancer patients. Patients and Methods: We performed genotyping in 17 single nucleotide polymorphisms (SNPs) of Excision Repair Cross-Complementation group (ERCC) genes and X-ray Repair Cross-Complementing (XRCC) genes of 345 lung cancer patients by Sequenom MassARRAY. We used Cox proportional hazard models, state and plink to analyze the associations between SNPs and the prognosis of lung cancer patients. Results: We found that the ERCC5 rs873601 was associated with the overall survival time in lung cancer patients treat by platinum-based chemotherapy (p=0.031*). We also discovered that the polymorphisms in rs873601 was significantly associated with the prognosis in age more than 55 years, Small Cell Lung Cancer (SCLC) and smoking patients, Long Intergenic Non-protein Coding RNA (PNKY) rs2444933 in age less than 55 years, SCLC, metastasis and stage III/IV/ED patients, Short Tau Inversion Recovery (STIR1) rs3740051 in SCLC and metastasis patients, PNKY rs1869641 in SCLC patients, XRCC5 rs1051685 in non-metastasis patients, respectively. Conclusion: The ERCC5 rs873601(G>A) maybe a valuable biomarker for predicting the prognosis in lung cancer patients treated with platinum-based chemotherapy. Statements and Declarations: The authors declare that they have no conflict of interest.

Background and Objectives: Treatment for antineutrophil cytoplasmic antibody-associated vasculitis (AAV) must deal with immunosuppression as well as infections associated with compromised immune system, such as tuberculosis (TB). Our aim was to overcome the gap in the literature concerning the risk of incidental TB after diagnosis of AAV. Materials and Methods: This retrospective population-based cohort study was based on the data from the National Health Insurance Research Database in Taiwan. We used a novel algorithm to identify patients with newly diagnosed granulomatous polyangiitis (GPA) or microscopic polyangiitis (MPA) between January 1, 2000 and December 31, 2012. The primary outcome was risk of incidental TB. Cox proportional hazard models were used to evaluate the association between AAV and incidental TB. Results: A total of 2,257 patients with AAV and a propensity-score matched cohort of 9,028 patients were studied. Overall, patients with AAV were at a 1.48x higher risk of contracting incidental TB than were patients in the matched cohort (adjusted HR 1.48; 95% confidence interval [CI], 1.02-2.15). Note that the highest risk of contracting incidental TB was in the first two years following a diagnosis of AAV, with a nearly 1-fold increase in risk (adjusted HR, 1.91; 95% CI, 1.01-3.60). Female AAV patients were 3.24x more likely than females without AAV to develop TB (adjusted HR 3.24; 95%CI, 1.85-5.67). Conclusion: Patients with AAV face an elevated risk of contracting incidental TB, particularly within the first two years after AAV diagnosis. The risk of contracting TB is higher among female AAV patients than among females without AAV.

Articular cartilage injuries are found in up to 60 % of patients who undergo an arthroscopic knee procedure, those that totally affect articular cartilage (grade IV) have limited regenerative capac-ity and extended time for recovery, 3-D scaffolds represent a novel solution to address this type of injury. Our purpose was to analyze MRI findings and functional status of patients that underwent repair of chondral defects either by microfractures or Hyaluronan (HA) 3-D Scaffold. We con-ducted a retrospective study of patients with chondral defects. The outcomes analyzed in this study included anatomical changes envaulted by the Henderson score (based on MRI findings) at baseline, 6, and 12 months after surgery; and improvement in functionality, evaluated by the Modified Cincinnati Knee Rating System (MCKRS) at baseline and 6 months after surgery. Clini-cal and demographic characteristics were similar for both groups. There was a statistically sig-nificant improvement in Henderson score for the 3-D scaffolding treated group at 6 months, ver-sus the microfracture group (p < 0.0001). Improvement in functionality, measured by MCKRS was more frequently found in the 3-D scaffold treated group. In conclusion the use of HA 3-D scaf-folding was superior with faster recovery, evident after 6 months of the surgery, that progress to full recovery in all patients after a year of surgery. Future studies with a randomized design might help to sustain our findings. This study provides a level III of evidence.

The study focuses on solving urban challenges such as temperature reduction, urban stormwater management, noise reduction, air quality improvement, and CO2 concentrations reduction, and suggests terrestrial and freshwater habitat types (HTs) found in Europe, as innovative forms of nature-based solutions (NBS) for them. Establishment of native HTs in different urban environments to solve urban challenges would enhance biodiversity at different levels and integrate this aspect in urban planning. This contribution builds on the recognition that surfaces of vegetated terrain are the most versatile NBS in addressing the broadest range of environmental problems in urban areas and that the processes running within these green spaces offer the key to socio-ecological improvements of such areas. Employing narrative literature review, qualitative content analysis, and interdisciplinary expert discussion this paper defines why and how native HTs of unchanged nature can be implemented as NBS in the urban environment, indicate potential HTs for specific urban challenges and presents an approach to the inclusion of HTs as NBS into spatial planning documents at national, regional, and local levels. The proposed planning approach attributes added value to HT, and by linking the concepts of NBS and HT integrates them into urban planning.

In the context of growing global political tension and introduction of world trade barriers, the urgent task is to develop new tools for assessing their consequences. In the paper we present the agent-based model of trade wars, considering organizations, states and residents generated using initial statistical data. Simulation determines changes in output and supplies of organizations under trade restrictions. Results of calculations on the developed model and comparison of various model complexes forecasts with real consequences of trade wars between the USA and China in 2018 and Western countries against Russia in 2022 are presented. Within calculations four scenarios were considered: (1) baseline, (2) new restrictions between China and the USA, (3) more serious sanctions against China and Russia by the USA and the EU, (4) a global trade war. In the second scenario deviation GDP of the USA and China from the baseline scenario does not exceed 0.5%. In the third scenario, the range of countries involved is expanding, and the fall in GDP in them is expected at the level of 0.7-1%. In the fourth scenario, the entire world economy experiences a serious slowdown, and the EU are facing the most severe consequences, going into recession.

Oxygen based heterocyclic moieties hold an ample range of therapeutic activities. Heterocyclic molecules are nominated as vital components of an extensive array of structural motifs with both biological and pharmaceutical significance. The oxygen-based scaffolds act as anticancer candidates and are also present in numerous phytomolecules viz; irinotecan, camptothecin, topotecan, taxol, taxotere, podophylotoxin, etoposide, daunorubicin and teniposide. The architectural design of numerous structural motifs for amelioration of cancer has become progressively amplified in recent past years. Until now presently there is no strategic treatment which is so capable that can cure cancer from its roots. Henceforth, it is very indispensible to design novel anticancer structural motifs with least side effects. The oxygen containing heterocyclic scaffolds includes flavonoids, pyrans, xanthones and coumarins are of utmost importance in medical chemistry for the mitigation of cancer. This assemblage offers several recent developments as anticancer oxygen containing heterocyclic molecules all-round the globe and attracted the structural motifs of auspicious molecules, along with their mechanistic insights, IC50 values, structure–activity relationships, and molecular docking studies. The encouraging properties discovered by these oxygen-based scaffolds unconditionally engaging them at frontline in invention of potential drug candidates. Consequently, these probably will be of amazing attention to scientists working on the design and synthesis of antitumor candidates.

River monitoring has the potential to grow substantially with present-day available affordable and locally sourced hardware. Yet river monitoring networks are still under pressure due to lack of resources, difficulties with maintenance, and rapidly changing conditions which in part may be due to climate change. We advocate that to turn around this trend, monitoring stations must rely on local people, work with locally available devices, work without contact with water and operate through openly available knowledge. River observations with camera videos have this potential. IP cameras, drones or smartphones are widely available as observation platforms. The scientific methods are well established in literature. Yet current attempts to establish scalable open-source software solutions that can be operated anywhere are lacking. In fact, currently available software is either research-oriented, more aimed at incidental observations, is restricted to single-use licenses, entirely proprietary, or restricted to operations through a third-party Software as a Service. To overcome this obstacle, we present OpenRiverCam, a free and open-source software ecosystem for river observations that can fulfill a wide variety of use cases and business cases through a well-documented and simple to use Application Programming Interface, service workflows, cloud scalability and interoperability, and options to extend to several applications within the hydrological, hydrodynamic, environmental and geospatial domains. We demonstrate its current technical abilities through three different case studies that all originate from a user perspective. We discuss the future developments to meet further requirements, which include documentation, widely available training materials and embedding in curricula, and further hardware and software developments.

Nurses’ competency towards Evidence-based Practice (EBP) has been extensively investigated by several studies worldwide. However, factors affecting the competence of Greek nurses working in the NHS have not been fully investigated in terms of EBP. Thus, this study aimed to explore the impact of individual qualifications of nurses on their competence towards EBP. Data from 473 registered nurses working in 10 hospitals of in the Greek National Health Service (NHS) were collected between October and December 2022 using a convenience-sampling method in a cross-section design. The Greek version of the 35-item (5-point Likert scale) Evidence-Based Practice Competency Questionnaire for Professional Registered Nurses (EBP-COQ Prof) was used to assess the competence level of nurses focusing on the attitudes, skills, and knowledge as well as the utilization of EBP in clinical practice. One-way ANOVA and Pearson coefficient tests were applied to compare possible differences among variables (two or more groups) as appropriate. A multi-factorial regression model was applied to explore participants’ qualifications, including demographics (MSc degree, gender, English language knowledge, etc.) as independent variables, and to control for potential confounding effects toward EBP competency. P-values &lt;0.05 were considered statistically significant. The mean age of 473 participants (402 women and 71 men) was 44.7 ± 9.2 years old. The mean value of competence subscales was found as follows: attitudes 3.9±0.6, knowledge 3.7±0.6, skills 3.1±0.8, and utilization 3.4±0.7. A multivariate regression analysis revealed that associates of “Master's degree” (t=3.039, p=0.003), “Writing an academic article” (3.409, p=0.001), “Working in a University clinic” (2.203, p=0.028) and, “Computer Skills” (2.404, p=0.017) are positively affecting ‘Attitudes’, ‘Knowledge’, ‘Skills’ and ‘Utilization’. Respectively. The research data suggest that nurses working in Greek NHS are limited in competence towards EBP in comparison to other European countries. Therefore, Vocational, Educational and Training programs tailored to EBP enhancement are crucially important.

Advances in technology and information systems have had a major impact on people's lives and activities. Smartphone use plays an important role in many areas, including housing governance. One of the problems faced by housing administrators is administrative management, which is still manual. To overcome this, it is proposed to use a web-based application. A literature study was conducted to support the development of this application. Data collection through interviews and observations was carried out to obtain system requirements. The Agile Scrum method is used in making applications. These applications have non-functional requirements such as security, availability, performance, usability, and compatibility. Implementation using PHP and MySQL. Testing is done to ensure the application functions properly. This application allows administrators to manage citizen data, payment of contributions, billing, and print financial reports. Residents can upload proof of transfer and print proof of payment. It is hoped that this application will facilitate housing administration, improve the quality of life in the community, and create a better housing environment.

The erythropoietin-producing hepatocellular carcinoma (Eph) receptors are the largest receptor tyrosine kinases family. EphB4 is essential for cell adhesion and motility during embryogenesis. Pathologically, EphB4 is overexpressed and contributes to poor prognosis in various tumors. Therefore, sensitive monoclonal antibodies (mAbs) should be developed to predict the prognosis for multiple tumors with high EphB4 expression, including breast and gastric cancers. This study aimed to develop highly sensitive and specific anti-EphB4 mAbs for several applications using the Cell-Based Immunization and Screening (CBIS) method. EphB4-overexpressed Chinese hamster ovary (CHO)-K1 (CHO/EphB4) cells were immunized into mice, and we established an anti-EphB4 mAb (clone B4Mab-7), which is applicable for flow cytometry, western blotting, and immunohistochemistry. B4Mab-7 reacted with endogenous EphB4-positive breast cancer cell lines, MCF-7 and MDA-MB-468, but did not react with EphB4-knockout MCF-7 (BINDS-52) in flow cytometry. Dissociation constant (KD) values were determined to be 2.9 × 10‑9 M, 1.3 × 10‑9 M, and 3.3 × 10‑9 M by flow cytometric analysis for CHO/EphB4, MCF-7, and MDA-MB-468 cells, respectively. B4Mab-7 detected the EphB4 protein bands from breast cancer cells in western blotting, and stained breast cancer tissues immunohistochemistry. Altogether, B4Mab-7 demonstrated high sensitivity and specificity against EphB4 in various applications.

Lomefloxacin (F1) and pefloxacin (F2) have a broad spectrum of antimicrobial activities against Gram-positive and Gram-negative bacteria. In this study, we investigated the complexation mode, morphological and biological properties of four metal-based complexes of F1 and F2 molecules with Mg(II), Ca(II), Zn(II), and Fe(III) metal ions. These complexes were prepared at ~60–70°C in a neutral medium using a 5% NH3 solution at pH ~7-8 with a 1:1 ratio. Multiple physicochemical methods were employed to characterize the binding mode between F1 and F2 with the metal ions under investigation. The results of these methods suggested that the gross formula of the complexes obtained with the metal ions were [MgF1(H2O)Cl]2H2O, [CaF1(H2O)Cl]3H2O, [ZnF1(H2O)Cl], [FeF1(H2O)2Cl2]Cl2H2O, [MgF2(H2O)Cl]2H2O, [CaF2(H2O)Cl]3H2O, [ZnF2(H2O)Cl], and [FeF2(H2O)2Cl2]Cl2H2O. The microscopic characterizations indicated that the Ca(II)-F1 complex had an interesting surface topography. Its particles had a homogenous, short, rod-like shaped structure that clustered together to form a tree shape. Using the Kirby-Bauer disc diffusion protocol, the synthesized metal-based complexes were screened in vitro against different Gram-positive and Gram-negative bacterial and fungal species. The antimicrobial profile of the Fe(III)-F1 complex indicated that it had remarkable inhibitory activity against all the tested bacterial and fungal species with potency equal to that of the standard drugs (streptomycin and ketoconazole).

Ocean wave energy is a significantly well-liked renewable energy source. The Internet of Things (IoT) offers a great opportunity for development of the ocean wave energy research. The IoT technology significantly enhanced the performance of the ocean wave energy converter (WEC). The data obtained from IoT devices reduce the risk of using WEC. However, Integrating IoT devices with the WEC is a daunting task because controlling the WEC needs real-time data. This paper investigated the performance of WEC and estimate the lifetime of the modules. IoT devices integrated with various sensors determine different parameters and conditions of the ocean. The IoT platform is used for wireless voltmeters, wireless AC current meters, wireless voltage detection, wireless resistance sensors, wireless temperature sensor, wireless accelerometer, wireless pressure meters, and wireless water level sensors to determine the real-time condition of the ocean wave. These devices are also proven to be reliable and accurate.

This paper presents a novel DQ-based multicarrier Pulse Width Modulation PWM for a single-phase, three-level PV-powered grid-connected F-type inverter. The main control objective in the proposed inverter is to regulate the grid current with low total harmonic distortion and load power components compensation. Despite the F-type inverter’s advanced advantages, there are only a few works addressing the control issue in the literature yet. The proposed control and switching methods aim to achieve both DC side voltage balance and lowest switching losses. The proposed scheme has been designed based on a modified multi-carrier PWM switching algorithm. Consequently, the proposed control method able to satisfy the requirements of DC side voltage balance and achieve lower switching losses. A further advantage of the proposed control and switching methods is that they retain the main advantage of the F-Type inverter, which is that only 25% of the power switches are exposed to full DC voltage. This is an important advantage since it reduces the overall cost of the inverter and improves its reliability. Overall, the proposed modified multi-carrier PWM switching algorithm appears to be a promising approach for controlling the F-Type inverter, offering improved performance and efficiency compared to other control methods. The theoretical model was verified through simulation using MATLAB/Simulink. According to the simulation results, the grid current and dc capacitor voltages are successfully managed in all operational situations.

The current concerns of both society and materials industries about the environmental impact of thermoset composites, as well as new legislation, have led the scientific sector to search for more sustainable alternatives to reduce the environmental impact of thermoset composites. Until now, to a large extent, sustainable reinforcements have been used to manufacture more sustainable composites and thus contribute to the reduction of pollutants. However, in recent years, new alternatives have been developed such as thermosetting resins with bio-based content and/or systems such as recyclable amines and vitrimers that enable recycling/reuse. Throughout this review, some new bio-based thermoset systems as well as new recyclable systems and sustainable reinforcements are described and a brief overview of the biocomposites market and its impact is shown.

The Pandemic in 2019 forced a digital adaptation with direct consequences on all educational stakeholders. On behalf of teachers and trainers, while many regarded these changes with some scepticism, others embraced the opportunity to integrate technology into their teaching methods and as learning resources. As translation trainers, it is essential to follow and understand the translation market. Thus, the exponential changes that digital technology has brought to this sector over the years impose constant shifts in teaching and learning methods and resources. In fact, translators require vast competencies, amongst which is the flexibility to adapt. In translation training Project-Based Learning (PBL) has been established as an essential teaching and learning method, as it has proven to foster the development of competencies as it simulates the translator's work environment. Thus, the need to adapt new strategies reinforced PBL and its benefits. PBL, however, similar to a freelance translator, places the student in the centre of the learning process, where self-regulation becomes essential, as it is necessary to analyse the market/situation and be flexible enough to adapt to the context accordingly. As of 2018-2019, technical translation courses at ISCAP have implemented PBL as their main teaching and learning method. At the same time, a study on student self-regulation began. The purpose was to understand student perception on their own self-regulation competence and its development or lack thereof after one year of PBL. Results indicate that PBL is seen as a useful simulation of the translation labour market and that it does enhance many essential competences, amongst which is student self-regulation.