Fresh water is an increasingly scarce resource in both urban and rural developments. As a response to this challenge, non-potable water reuse is on the rise. This research explored a potential off-grid system for water purification, consisting of a staircase wetland with terracotta pot plants working as a filter for greywater. The study further investigated the physicochemical properties of the greywater and the soil before and after the wetland purification. Results showed that the filtered water satisfied all requirements for water reuse, e.g., pH, turbidity, and total coliforms. The research then uniquely investigated the effect of greywater on the soil biodiversity and soil biomass using soil DNA extraction and the tea bag index testing method. The filtered greywater absorbed by soil decomposed the soil faster and stabilized it better compared to tap water-absorbed soil or unfiltered greywater. The DNA generation sequencing revealed no significant differences in alpha diversity between control and treatment samples. The beta diversity differences were significant. This nature-based solution can lead to reduced load on the sewage system, resulting in less wastewater generation.

The paper analyses the national DK-model Hydrological Information and Prediction (HIP) system and HIP portal viewed as a ‘Digital Twin’ and how the introduction of real-time dynamic updating of the DK-model HIP simulations can give room for plug-in sub-models with real-time boundary conditions made available from a HIP portal. The possible feedback to a national real-time risk knowledge base during extreme events (flooding and drought) is also discussed. Under climate change conditions, Denmark is likely to experience more rain in winter, more evapotranspiration in summer, intensified cloudbursts, drought, and sea level rise. These challenges have been addressed as part of the Joint Governmental Digitalization Strategy 2016-2020 for better use and sharing of public data about the terrain, water, and climate to support climate adaptation, water management, and disaster risk reduction. This initiative included the development of a new web-based data portal (HIP portal) developed by the Danish Agency for Data Supply and Infrastructure (SDFI). GEUS delivered 5 terra-byte of hydrological model data to the portal with robust calibration methods and hybrid Machine Learning (ML) being key parts of the deliverables. The paper discusses the challenges and potentials of further developing the HIP Digital Twin with ‘plug-in Digital Twins’ for local river basins including feedback to the national level.

Several extinctions have already been attributed, at least in part, to global warming, as climate change constitutes a serious threat for species living in isolated ecosystems and thus unable to track habitat changes. However, in all these cases extinction was due to human impacts, often directly but generally also through exotic invasive species. For two arboreal land snails in Indian Ocean islands a link has been proposed with decreasing rainfall. The decline (but probably not extinction) of Pachnodus velutinus, a specialist of moist forests on the summits of northwestern Mahé, was most likely caused instead by invasive plants altering its habitat and alien predators decimating the population in the small remaining moist forests. An alternative explanation assuming genetic swamping through hybridization with a species from lower elevations has no basis, as the presumed hybrid constitutes a distinct species able to survive in the altered, dryer habitat. On Aldabra Atoll, the endemic Rhachistia aldabrae was claimed to have been the first extinction due to climate change, but is still extant. No relationship can be detected between number of sightings and annual rainfall, although a weighted measure that takes into account rainfall in previous years suggests a limited impact of weather. Analysis of the sighting record in various ways yields a probability of survival over time that never dropped below 0.3. The decline was caused instead by intense impacts of exotic invasive species. Alternative shortcuts to evaluate extinction rates among poorly known species are shown to be unreliable. Although no contemporary extinction can still be attributed to climate change, indirect and synergistic impacts on biodiversity are expected, especially through promoting biological invasions.

The year 2022 was characterized by several major events that impacted the business world in Indonesia and even globally after the COVID-19 pandemic devastated all business sectors in Indonesia and the world. The current business environment is experiencing accelerating turbulence characterized by increasing intensity of business competition, rapid changes in the market, and industrial connections climate. The industrial connection climate of an institution can be measured by the pattern of relationships that occur between workers and management. Industrial connections are fundamental to the sustainability of an organization and are understood as an important factor in influencing institutional performance. This research aims to look at the impact of the existence of industrial connections instruments, turbulence in the business environment on the industrial connections climate. Besides, how the industrial connections climate relates to firm performance. The research design is an inferential quantitative, using sampling and snowball sampling methods with total sample are 406. The data collected were analyzed using Structural Equation Model using LISREL version 8.70. This research used a survey to build an SEM model that tested the effect of organizational turbulence and industrial connections instruments on organizational climate directly, and tested mediation on organizational performance. All related indicators have outer loading more than 0.5 and T-value more than 1.96. Therefore, the conclusion is that all measurements are valid. Composite Reliability (CR) and VE for all indicators are >0.7 and >0.5 respectively. This research shows that industrial assosiation climate has a positive effect on business turbulence and industrial connections instruments. However, industrial connections instruments show a greater impact on the assosiation climate. This is because industrial connections instruments are the media used in the implementation of industrial connections in organizations. This research also confirms that industrial assosiation climate is positively related to organizational performance. The result of the indirect influence (IE) of 0.20 with t value is 8.47 means that the climate of Industrial connections is able to mediate the influence of Industrial connections Facilities on Organizational Performance.

We developed an artificial neural network as an air quality model and estimated the scope of the impact of climate change on future (until 2064) summertime trends of hourly Ozone (O3) concentrations at an urban air quality station in Tehran, Iran. Our developed scenarios assume that present-time emissions conditions of O3 precursors will remain constant in the future. Therefore, only the impact of climate change on future O3 concentrations is investigated in this study. GCM projections indicate more favorable climate conditions for O3 formation over the study area in the future: the surface temperature increases over all months of the year, solar radiation increases, and precipitation decreases in future summers, and summertime daily maximum temperature increases about 1.2 ∘C to 3 ∘C until 2064. In the scenario based on present-time O3 conditions in 2012 summer without any axceedances, the summertime exceedance days of 8-hr O3 standard are projected to increase in the future by about 4.2 days in the short term and about 12.3 days in the mid-term. Similarly, in the scenario based on present-time O3 conditions in 2010 summer with 58 days of exceedance from 8-hr O3 standard, exceedances are projected to increase about 4.5 days in the short term and about 14.1 days in the mid-term. Moreover, the number of Unhealthy and Very Unhealthy days in 8-hr AQI is also projected to increase based on pollution scenarios of both summers.

Climate change poses a serious threat to global agricultural activity and food production. To address this issue, plant genome editing technologies have been developed to provide an alternative solution for crop improvement. Unlike conventional breeding techniques (e.g., selective breeding and mutation breeding), modern genome editing tools offer more targeted and specific alterations of the plant genome to produce crops with desired traits, such as higher yield and/or stronger resilience to the changing environment. In this review, we discuss the current development and future applications of genome editing technologies in mitigating the impacts of biotic and abiotic stresses on agriculture. We focus specifically on the CRISPR/Cas system, which has been the center of attention in the last few years as a revolutionary genome-editing tool in various species. We also conducted a bibliographic analysis on CRISPR-related papers published from 2012 to 2021 (10 years) to identify trends and possible gaps in the CRISPR/Cas-related plant research. In addition, this review article outlines the current shortcomings and challenges of employing genome editing technologies in agriculture with notes on future prospective. We believe combining conventional and more innovative technologies in agriculture would be the key to optimizing crop improvement beyond the limitations of traditional agricultural practices.

Globally mangrove forests are substantially declining and a globally synthesized database of the drivers of deforestation and drivers’ interaction is scarce. Here we synthesized the key social-ecological drivers of global mangrove deforestation by reviewing about two hundred published scientific studies over the last four decades (from 1980 to 2021). Our focus was on both natural and anthropogenic drivers with gradual and abrupt impacts and their geographic ranges of effects and how these drivers interact. We also summarized the patterns of global mangrove coverage decline between 1990 and 2020 and identified the threatened mangrove species and their geographic ranges. Our consolidated studies reported a 8,600 km2 decline in the global mangrove coverage between 1990 and 2020 with the highest decline occurring in South and Southeast Asia (3870 km2). We could identify 11 threatened mangrove species, two of which are critically endangered (Sonneratia griffithii and Bruguiera hainseii). Our reviewed studies pointed to aquaculture and agriculture as the predominant driver of global mangrove deforestation though the spatial distribution of their impacts varied. Gradual climate variations, i.e. seal-level rise, long-term precipitation and temperature changes and driven coastline erosion, constitute the second major group of drivers. Our findings underline a strong interaction across natural and anthropogenic drivers with the strongest interaction between the driver groups aquaculture and agriculture and industrialization and pollution. Our results suggest prioritizing globally coordinated empirical studies linking drivers and mangrove changes and a global development of policies for mangrove conservation.

In Nigeria, desertification has become one of the most pronounced ecological disasters, with the impacts mostly affecting eleven frontline States. This has been attributed to a range of both nat-ural and man-made factors. This study applied a remote sensing-based change detection and indicator analysis to explore land use/land cover changes and detect major conversions from ecologically active land covers to sand dunes. Results indicate that areas covered by sand dunes (a major indicator of desertification) have doubled over the 25 years under consideration (1990 to 2015). Although about 0.71 km2 of dunes have been converted to vegetation, indicative of the success of various international, national, local, and individual afforestation efforts, conversely about 10.1 km2 of vegetation were converted to sand dunes, implying around 14 times more de-forestation compared to afforestation. Juxtaposing the progression of sand dune with climate records of the study area and examining the relationship between indicators of climate change and desertification suggested a mismatch between both processes as increasing rainfall and lower temperatures observed in 1994, 2005, 2012, and 2014 did not translated into positive feedbacks for desertification in the study area. On average, our results reveal that sand dune is progressing at a mean annual rate of about 15.2 km2 in the study area. Based on this study’s land cover change, trend and conversion assessment, visual reconciliation of climate records with land cover data, statistical analysis, observations from ground-truthing, as well as previous literature, it can be inferred that desertification in Nigeria is less a function of climate change, but more a product of human activities driven by poverty, population growth and failed government policies. Further projections by this study also reveal a high probability of more farmlands being converted to sand dunes by the year 2030 and 2045 if current practices prevail.

The global carbon neutrality challenge places a spotlight on forests as carbon sinks. However, greenhouse gas (GHG) balances of wood for material and energy use often reveal GHG emission savings in comparison with a non-wood reference. Is it thus better to increase wood production and use, or to conserve and expand the carbon stock in forests? GHG balances of wood products mostly ignore the dynamics of carbon storage in forests, which can be expressed as the carbon storage balance in forests (CSBF). For Germany, a CSBF of 0.25 to 1.15 t CO2/m³ wood can be assumed. When the CSBF is integrated into the GHG balance, GHG mitigation substantially deteriorates and wood products may even turn into a GHG source, e.g. in the case of energy wood. Here, building up the forest carbon sink would be the better option. We conclude that it is vital to include the CSBF in GHG balances of wood products if the wood is extracted from forests. Only then can GHG balances provide political decision-makers and stakeholders in the wood sector with a complete picture of GHG emissions.

Due to rising global warming and climate change, biodiversity protection has become a critical ecological concern. The rich biodiversity zones are under threat and are deteriorating, necessitating national, regional, and provincial efforts to safeguard these natural areas. The effective conservation of National Parks and Nature-protected Areas helps to improve biodiversity conservation, forest, and urban air quality. The continuous encroachment and abuse of these protected areas have degraded the ecosystem over time. While exploring the geophysical ecology and biodiversity conservation of these areas in West Africa, Kainji National Park was selected for this study because of its notable location, naturalness, rich habitat diversity, topographic uniqueness, and landmass. The conservation of national parks and nature-protected areas is a cornerstone of biodiversity conservation globally. This study is aimed at the target of United Nations Sustainable Development Goal 13, 2030- Climate Action, targeted at taking urgent action towards combating climate change and its impacts. The study captures both flora and fauna that are dominant in the study area. The 15 identified tree species were selected from over 30 species with 563,500,000 (an average of 3,700,000 in each sample frame) trees for every tree species/type with a total of 63% tree green canopy cover. The study areas divided into three zones were randomly sampled within a stratum of 25x25km frames divided into 150 sample frames for proper analyses using the i-Tree Eco v6.0.23. The following microclimatic data were captured and analyzed; photosynthetically active radiation, rain/precipitation, temperature, transpiration, evaporation, water intercepted by trees, avoided a runoff by trees, potential evaporation by trees, isoprene and monoterpene by trees. This study also further discusses the tree benefits of a green, low carbon, and sustainable environment within the context of biodiversity conservation considering carbon storage, carbon sequestration, hydrology effects, pollution removal, oxygen production, and volatile organic compounds (VOCs). There is a quick need for remotely-sensed information about the protected areas at regular intervals and government policies must be strict against illegal poaching, logging activities and other hazardous human impacts.

Biodiversity conservation questions human practices towards biodiversity and, therefore, largely conflicts with ordinary societal aspirations. Decisions on the location of protected areas, one of the most convincing conservation tools, reflect such a competitive endeavor. Operations Research (OR) brings a set of analytical models and tools capable of resolving the conflicting interests between ecology and economy. Recent technological advances have boosted the size and variety of data available to planners, thus challenging conventional approaches bounded on optimized solutions. New models and methods are requested to use such a massive amount of data in integrative schemes addressing a large variety of concerns. Here, we provide an overview on the past, present and future challenges that characterize spatial conservation models supported by OR. By enlarging the spatial, temporal, taxonomic and societal horizons of biodiversity conservation planners navigate around multiple bio-socioeconomic equilibria and are able to decide on cost-effective strategies to improve biodiversity persistence.

Current species’ range displacements are mostly triggered by climate change but European landscapes are largely dominated by human activities. In this study we identify the most promising spatial adaptive trajectories (SATs) for the thirty most threatened non volant mammal species in Europe up to 2080 (under three climate and land change scenarios) and where/when SATs of each species synchronically converge. We found large contrasts on the persistence of species in SATs, with some species largely reliant on the functionality of areas where many SATs converge. Overall, SATs and convergence centers are not adequately covered by existing conservation areas and coincide with crop and arable lands, compromising species persistence. It is important to invest in the protection of SATs and convergence centers through a mix of conventional instruments and new collaborative forms with the socio-economy. Anticipative plans at long-term coupled with risk analysis offer decision–makers templates to prevent negative surprises.

The indigenous communities across the globe especially in the rural areas consume locally available plants known as Traditional Food Plants (TFPs) for their nutritional and health-related needs. Recent research shows that many of the traditional food plants are highly nutritious as they contain health beneficial metabolites, vitamins, mineral elements and other nutrients. Excessive reliance on the mainstream staple crops has its own disadvantages. TFPs are nowadays considered important crops of the future and can act as supplementary foods for the burgeoning global population. They can also act as emergency foods in times of pandemics and other situations like COVID-19. The current situation necessitates locally available alternative nutritious TFPs for sustainable food production. To increase the cultivation or improve the traits in TFPs, it is essential to understand the molecular basis of the genes that regulate some important traits such as nutritional components and resilience to biotic and abiotic stresses. The integrated use of modern omics and gene editing technologies provide great opportunities to better understand the genetic and molecular basis of superior nutrient content, climate-resilient traits and adaptation to local agroclimatic zones. Recently, realising the importance and benefits of TFPs, scientists have shown interest in the prospection and sequencing of traditional food plants for their improvements, further cultivation and mainstreaming. Integrated omics such as genomics, transcriptomics, proteomics, metabolomics and ionomics are successfully used in plants and have provided a comprehensive understanding of gene-protein-metabolite networks. Combined use of omics and editing tools has led to successful editing of beneficial traits in few TFPs. This suggests that there is ample scope of integrated use of modern omics and editing tools/techniques for improvement of TFPs and their use for sustainable food production. In this article, we highlight the importance, scope and progress towards improvement of TFPs for valuable traits by integrated use of omics and gene editing techniques.

Under the “Korean emission trading system in the forestry sector (KETSF)” initiative, the South Korean government has developed several greenhouse gas (GHG) emissions reduction programs that include forestry activities as the cornerstones of the initiative. Forest management is deemed to be a major strategy to implement KETSF; this has been confirmed by most participants in the program, who have shown their preference for forest management projects as the most effective and encouraging strategy to participate in the KETSF program. For a successful implementation of KETSF projects is essential to explore methods that optimize the positive impacts of such strategies, thereby maximizing the economic returns and carbon stocks that result from the implementation of forest management activities. Thus, this study investigated several value-added KETSF projects in South Korea, which included simulated scenarios under two main forest management strategies: one based on an extension of the rotation age, and a second one based on reforestation with new species. Five forest management scenarios were examined and evaluated in their ability to maximize carbon stocks and economic returns. Based on the results, Scenarios 2 and 4 were identified as the best KETSF projects in terms of carbon stock increments. Additionally, the results indicated that projects including reforestation with new species added more economic value than projects that considered an extension of the rotation age. The study also revealed that KETSF projects generated revenue in both scenarios, by either extending the rotation age or by implementing reforestation with new species.

The virtual airport hub business model is an innovative solution supported by digital technologies, the implementation of which in continental air transport may lead to a reduction in energy consumption and to a reduction in greenhouse gas emissions. The prerequisites for the implementation of the described solution are: striving to implement the GHG emission reduction strategy laid out in the Paris Agreement (2015) and the European Green Deal (2019) as well as the EU digitalization strategy (2020). The use of predictive analitics to identify the mobility needs of population and operational capabilities of the sector, gives an opportunity to plan travel flows and to create an appropriate set of direct connections among regional airports every day. The results of the analysis of data from 2019 on the amount of energy consumption and GHG emissions indicate that in Europe, it would be possible to achieve reduce GHG emissions by 5% without reducing the number of passengers using air transport. The study was prepared after conducting literature studies, data analysis and using the method of formulating scenarios. The proposed solution has the features of an innovative business model, the implementation of which allows for obtaining more favorable effects using already available resources.

We have an aversion to density in America. Density is a continual trope in this country, blamed for all of the ills of urban life, from crime and racial unrest in the middle of the 20th century to public health concerns today. In the early stages of the COVID pandemic density was the culprit, even though we’ve subsequently seen outbreaks in rural areas and sprawling cities across the United States. This paper will look into the root of America’s problems with density and argue that density is not the problem but the solution to the challenges of today’s and tomorrow’s cities. As we deplete the resources of the planet, density is our most direct pathway to recover some balance with nature. Dense living is more efficient, less carbon intensive and more environmentally sustainable. As geospatial differentiations matter less due to advances in communication technology, it's the density of people and ideas that will continue to fuel innovation. Finally, in a world that is increasingly dominated by pluralism, denser living promotes openness, tolerance and diversity.

This work assesses sea-level rise using three different models created on Free and Open-Source Software for Geographic Information System (FOSS4GIS). Based on regional projections of Special Report on Climate Change and Oceans and Cryosphere (SROCC) of the Intergovernmental Panel on Climate Change (IPCC), the models were applied to a case of study on Rio Grande do Sul coast – Brazil under different sea-level rise scenarios by the end of this century. The End Point Rate for QGIS (EPR4Q), calculates a shoreline projection using End Point Rate method. The Uncertainty Bathtub Model (uBTM), analyses the sea-level rise impact by the uncertainty of sea-level projec-tions and vertical error of the Digital Elevation/Terrain Model (DEM/DTM). The Bruun Rule for Google Earth Engine Model (BRGM) predicts the shoreline position with sea-level rise, using topographic and bathymetric data from Unmanned Aerial Vehicles (UAV) and Coastal Modelling System (SMC – Brazil), respectively. The results indicated a maximum shoreline retreat for 2100 of -502 m and -1727 m using EPR4Q and BRGM, correspondingly. The uBTM using the land-use of Mapbiomas showed a maximum of 44.57 km2 of urban area impacted by the sea-level flood. This research highlights the possibility of performing coastal management analysis in GIS environ-ment using non-commercial software.

Greenhouse Gases (GHG) emissions from dairy farms are significant contributors to global warming. However much of the published work on GHG reduction is focused on either Methane (CH4) or Nitrous Oxide (N2O), with few, if any, considering the interactions that changes to farm systems can have on both gases. This paper takes the raw data from a year of activity on a 300 cow commercial dairy farm in Northern Ireland to more accurately quantify the GHG sources by use of a simple predictive model based on IPCC methodology. Differing herd management policies are examined together with the impact of integrating Anaerobic Digestion (AD) into each farm system. Whilst significant success can be predicted in capturing CH4 and Carbon Dioxide (CO2) as biogas and preventing N2O emissions, gains made can be lost in a subsequent process negating some or all of the advantage. The process of extracting value from the captured resource is discussed in the light of current farm parameters together with indications of other potential revenue streams. However, this study has concluded that despite the significant potential for GHG reduction, there is little incentive for widespread adoption of manure based farm scale AD in the UK at this time.

COVID‑19 pandemic, also known as the coronavirus pandemic, has spread rapidly across the globe since the end of 2019 and brought impressive changes in our life and living through partial or full lockdown and reduced anthropogenic activities. Hence, it is imperative to investigate the impacts and consequences of COVID-19 on global eco-system and environment. The present study accordingly addresses the impacts and consequences of COVID-19 by ten environmental indicators; viz., global warming (or greenhouse gas emission), stratospheric ozone depletion, ozone formation (on human health), fine particulate matter formation, smog, ionizing radiation, human carcinogenic toxicity, human non-carcinogenic toxicity, water resource consumption, and effect on human health. The overall study has been performed in agreement with the standard principle and guidelines of life cycle assessment. Worldwide changes in consumption of fossil fuels, viz., petroleum, coal and natural gas, as a result of COVID-19 pandemic, has been the core theme of the study. Outcomes from the study show that COVID-19 has been a ‘blessing in disguise’ for the global environment with most of the above-mentioned indicators declining by approximately 20-30% in 2020 in comparison to the 2019 level.

Drought stress at the reproductive stage in rice is one of the most important cause for yield reduction, affecting both productivity and quality. All Basmati rice varieties, including the popular cultivar ‘Pusa Basmati 1 (PB1)’ is highly sensitive to reproductive stage drought stress (RSDS). We report for the first time, improvement of a Basmati cultivar for RSDS tolerance, with the introgression of a major quantitative trait locus (QTL), ‘qDTY1.1’ into PB1. The QTL donor was sourced from an aus variety, Nagina 22 (N22). A QTL linked microsatellite (SSR) marker ‘RM 431’ was employed for foreground selection for qDTY1.1 in the marker assisted backcross breeding process. A set of 113 SSR markers polymorphic between N22 and PB1 were utilized for background selection to ensure higher genome recovery. After three backcrosses followed by five generations of selfing, eighteen near isogenic lines (NILs) were developed, through combinatory selection for agro-morphological, grain and cooking superiority traits. The NILs were evaluated for three consecutive Kharif seasons, 2017, 2018 and 2019 under well-watered and drought stress conditions. RSDS tolerance and yield stability indicated that NIL3, NIL5, NIL6, NIL7, NIL12, NIL15 and NIL17 were best in terms of overall agronomic and grain quality under RSDS. Additionally, NILs exhibited high yield potential under normal condition as well. The RSDS tolerant Basmati NILs with high resilience to water stress, is a valuable resource for sustaining Basmati rice production under water limiting production environments.

The conservation of coastal wetland ecosystems, like mangrove forests and salt marshes, represents a critical strategy for mitigating atmospheric emissions and climate change in the 21st century. Yet the existence of these environments is threatened by human-induced disturbances, namely deforestation and accelerated sea-level rise. Coastal systems maintain surface elevation in response to sea-level rise through a combination of physical and biological processes both above and below the ground surface. The quantification and relative contribution of belowground process controls (e.g., seasonal water content, organic matter decomposition) on surface elevation change is largely unexplored but crucial for informing coastal ecosystem sustainability. To address this knowledge deficit, we integrated measurements of surface elevation change of the live root zone (0.5 to 1 m depth) with geotechnical data from co-located sediment cores in the Sundarbans mangrove forest (SMF) of southwest Bangladesh. Core data reveal that the primary belowground controls on surface elevation change include seasonal fluctuations in pore-water content and the relative abundance of fine-grained sediments capable of volumetric expansion and contraction, supporting an elevation gain of ~2.42 ± 0.26 cm yr⁻¹. In contrast to many mangrove environments, the soils of the SMF contain little organic matter and are dominantly composed (>90%) of inorganic clastic sediments. The mineral-rich soil texture likely leads to less compaction-induced subsidence as compared to organic-rich substrates and facilitates surface equilibrium in response to sea level rise. Despite a relatively high soil bulk density, soil carbon (C) density of the SMF is very low owing to the dearth of preserved organic content. However, rates of C accumulation are balanced out by locally high accretion rates, rendering the SMF a greater sink of terrestrial C than the worldwide mangrove average. The findings of this study demonstrate that C accumulation in the SMF, and possibly other alluvial mangrove forests, is highly dependent on the continued delivery of sediment to the mangrove platform and associated settings.

The severity of the ongoing COVID-19 outbreak demand from countries to adopt extreme measurements of social isolation to stop the spread and flatten the curve of contamination. Although social isolation measures may have negative impacts on economy, historically it has been showed to be more effective in saving lives and less damaging to economy than not adopting these measurements during a viral pandemic. In Brazil, despite the positioning of the president against social isolation due to the consequent economic recession, the rapid spread of the virus has worried the governors of the Brazilian states, which are thus managing stringent social isolation measurements to avoid the advance of the virus. Since one of the main strategies to guarantee progress and economic growth in Brazil has been the exploitation of natural resources from the Amazonia biome, here we discuss the importance of this biome to Brazilian economy during the post-pandemic recession and highlights potential strategies to burst the economy without promoting Amazonia destruction. We show that, together with the REDD+ and the Amazon Fund, the Forest bonds represents good strategies to burst Brazilian economy in a sustainable way, showing that it is possible to improve the commodities without increasing Amazonia deforestation or the greenhouse gases emissions. Amazonia is a biome of global importance for the avoidance of another global crisis, which will occur if we reach the climatic tipping point of 1.5°C. Thus, governmental actions should go towards its preservation, not exploitation and depletion. The commitment of the government with environmental conservation is paramount so that these economic strategies have positive results, especially in a post-pandemic scenario, where the economy will be extremely weakened. The COVID-19 brings us a lesson regarding how our attitudes can impact the world, and what we can expect from a global crisis. Perhaps we can apply these lessons and focus on change our economy towards a sustainable direction to avoid another global crisis in the years to come.

Many estuarine ecosystems and the fish communities that inhabit them have undergone substantial changes in the past several decades, largely due to multiple interacting stressors that are often of anthropogenic origin. Few are more impactful than droughts, which are predicted to increase in both frequency and severity with climate change. In this study, we examined over five decades of fish monitoring data from the San Francisco Estuary, California, U.S.A, to evaluate the resistance and resilience of fish communities to disturbance from prolonged drought events. High resistance was defined by the lack of decline in species occurrence from a wet to a subsequent drought period, while high resilience was defined by the increase in species occurrence from a drought to a subsequent wet period. We found some unifying themes connecting the multiple drought events over the fifty-year period. Pelagic fishes consistently declined during droughts (low resistance), but exhibit a considerable amount of resiliency and often rebound in the subsequent wet years. However, full recovery does not occur in all wet years following droughts, leading to permanently lower baseline numbers for some pelagic fishes over time. In contrast, littoral fishes seem to be more resistant to drought and may even increase in occurrence during dry years. Based on the consistent detrimental effects of drought on pelagic fishes within the San Francisco Estuary and the inability of these fish populations to recover in some years, we conclude that freshwater flow remains a crucial but not sufficient management tool for the conservation of estuarine biodiversity.

Due to an increase of the monocrystalline PV systems installations, for a drive towards the sustainable smart cities in the hot arid developing country such as Pakistan, pose challenges of the performance and degradation issues. Monocrystalline PV module efficiencies are declining and damaging under the continuous exposure to higher surface day-time temperatures in the different parts of the country. A MATLAB simulations were performed based on the validated mathematical approach. This paper investigates the hot arid surface temperature impacts on the performance of PV modules during the summer and winter seasons in Pakistan. The investigations are performed examining the power generating efficiency of the PV system. This paper also investigates the influence of installations of PV-system in the North, South, East and West regions of Pakistan. It was examined that the northern areas of Pakistan are more suitable for maintaining the long-term durability of the PV system. Investigations are performed for the peak summer and peak winter days. During summer months, cooling strategies have to be implemented to overcome the heating effects whilst reducing degradation effect on installed PV-system.

Because of the near-term risk of extreme weather events and other adverse consequences from climate change, and, at least in the longer term, global fossil fuel depletion, there is world-wide interest in shifting to noncarbon energy sources, especially renewable energy (RE). Because of possible limitations on conventional renewable energy sources, researchers have looked for ways of overcoming these shortcomings by introducing radically new energy technologies. The largest RE source today is bioenergy, while solar energy and wind energy are regarded as having the largest technical potential. This paper reviews the literature on proposed new technologies for each of these three RE sources: microalgae for bioenergy, photolysis and airborne wind turbines. The main finding is that their proponents have underestimated the difficulties facing their introduction on a very large scale.

Surface urban heat island (SUHI) depicts the deteriorating thermal environment in high-density cities and local climate zone (LCZ) classification provides a universal protocol for SUHI identification. In this study, taking the central urbanized area of Guangzhou in the humid subtropical region of China as the study area, the maps or images of LCZ, land surface temperature (LST), SUHI and urban design factors were achieved by using Landsat satellite data, GIS database and a series of retrieval and classification algorithms, and the urban design factors influencing SUHI were investigated based on 625 samples of LCZs. The results show that in the summer daytime under the clear sky condition, the LST varied greatly from 26 °C to 40 °C and the SUHI changed in a wide range of -6 °C to 8 °C in the LCZs of the study area. Seven and five urban design factors influencing the summer daytime SUHI were identified for the two dominant LCZ of LCZs 1-5 (LCZ 1 to LCZ 5) and the mixed LCZ (containing at least three types of LCZs), respectively. The summer daytime SUHI prediction models were obtained by using the step-wise multiple linear regression, with the performance of R2 of 0.697, RMSE of 1.21 °C, and the d value of 0.81 for the model of LCZs 1-5, and the values of 0.666, 1.66 °C, and 0.76 for the model of the mixed LCZ, indicating that the models can predict the changes of SUHI with LCZs to a large and satisfactory extent. This study presents a methodology to efficiently achieve a large sample of SUHI and urban design factors of LCZs in the largely urbanized cities, and provides information beneficial to the urban designs and regenerations in the humid subtropical region.

To estimate The potential inventory of natural gas hydrates in the Levant Basin we correlated the gas hydrate stability zone (GHSZ), modeled with locally estimated thermodynamic parameters, with seismic indicators of gas. Compilation of oceanographic measurements define the deep-water temperature and salinity to 13.8°C and 38.8‰ respectively, predicting the top GHSZ at a water depth of 1250±5 m. Assuming beneath the seafloor a hydrostatic pore-pressure, the water body salinity, and geothermal gradients ranging between 20 to 28.5°C/km, yields a useful first-order base-GHSZ approximation. Our model predicts that the entire northwestern half of the Levant Basin lies within the GHSZ, with a median thickness of ~150 m. High amplitude seismic reflectivity (HASR) imaged on an extensive 3D seismic dataset, consistently correlates with verified active seafloor gas seepage and is pervasively distributed across the deep-sea fan of the Nile within the Levant. Two main trends observed for the distribution of HASR are suggested to represent: (1) shallow gas and possibly hydrates, within buried channel-lobe systems 25 to 100 m beneath the seafloor; and (2) a regionally discontinuous bottom simulating reflection (BSR) broadly matching the modeled base GHSZ. We therefore estimate the potential methane hydrates reserve within the Levant Basin at ~4 Tcf.

Climate change represents a major threat to lotic freshwater ecosystems and their ability to support the provision of ecosystem services. England’s chalk streams are in a poor state of health, with significant concerns regarding their resilience, the ability to adapt, under a changing climate. This paper aims to quantify the effect of climate change on hydroecological response, the health of the river, for the River Nar, a SSSI in the south-east of England. To this end, we apply a coupled hydrological and hydroecological modelling framework, with the UKCP09 probabilistic climate projections serving as input (A1B high emissions scenario). Results show that, from 2021 to the end of the century, hydroecological response becomes more heterogeneous. Despite the limited range of the functional feeding groups on the baseline, the River Nar has been able to adapt to extreme events due to inter-annual variation. In the future, this variation is greatly reduced, raising real concerns over the resilience of the river ecosystem under climate change. These new insights into the health of the River Nar, and chalk streams more generally, highlights the necessity of further study and the real need to for changed river management practices.

The IPAT equation provides a simple but powerful model for understanding sustainability, particularly from the challenge posed by the Anthropocene—how to reduce personal or societal impact. Impact is calculated by multiplying population, affluence and technology, and a ‘reduction coefficient’ e is used to explore targeted reductions in impact of different entities to cap total (summed) impact. The model offers two solutions. First, that all three factors are essential in determining total impact; a focus on just one or two is not justifiable without credibly addressing the other(s). Second, by presenting reduction of impact as a proportion of current activity, the solution becomes accessible to an individual actor (e.g., an individual, family, organization, or country). Application of the model is illustrated based on household weekly food consumption from cultures around the world. The model helps unify a) disparate perspectives on population, affluence and technology, which currently oppose one another from a basis of belief or dogma, and b) different sectors (e.g., food production, energy, climate impacts and others), as well as actors, so they can jointly identify strategies to resolve their contributions to approaching larger scale sustainability.

Regional declines of the Korean fir (Abies koreana) have been observed since the 1980s on the subalpine region. To explain this decline, it is fundamental to investigate the degree to which environmental factors have contributed to plant distributions on diverse spatial scales. We applied a hierarchical regression model to determine quantitatively the relationship between the abundance of Korean fir (seedlings) and diverse environmental factors across two different ecological scales. We measured Korean fir density and the occurrence of its seedlings in 102 (84) plots nested at five sites and collected a range of environmental factors at the same plots. Our model included hierarchical explanatory variables at both site-level (weather conditions) and plot-level (micro-topographic factors, soil properties, and competing species). The occurrence of Korean fir seedlings was positively associated with moss cover and rock cover but negatively related to dwarf bamboo cover. On site-level, winter precipitation was significantly positively related to the occurrence of seedlings. A hierarchical Poisson regression model revealed that Korean fir density were negatively associated with slope aspect, topographic position index, Quercus mongolica cover, and mean summer temperature. Our results suggest that drought and competition with other species are factors which halt the survival of Korean fir. We can predict that the population of Korean fir will continue to decline on the Korean Peninsula due to rising temperatures and seasonal drought, and only a few Korean fir will survive on northern slopes or valleys where competition with dwarf bamboo and Q. mongolica can be avoided.

This study investigates proximate drivers of cropland and forest degradation in Kloto district (Togo, West Africa) as, way of, exploring integrated sustainable landscape approaches in respect to socio-economic and environmental needs and requirements. Net change analysis of major cash and food crops based on three time steps Landsat data (1985–2002, 2002–2017 and 1985–2017) and quantitative analysis from participatory survey data with farmers and landowners are used. Study underlines poor agricultural systems and cassava farming as major impediments to alarming forest losses between 1985–2017. Significant net loss in forests cover by 23.6% and surface areas under cultivation of cocoa agroforestry and maize by 12.99 and 10.1% from 1985 to 2017, due to, intensive cassava cropping (38.78%) and settlement expansions (7.84%). Meanwhile, loss in forest cover between 2017 and 2002 was marginal (8.36%) compared to the period 1985–2002 for which the loss was considerable (15.24%). Based on participatory surveys, majority of agricultural lands are threatened by erosion or physical deterioration (67.5%), land degradation or salt deposits and loss of micro/macro fauna and flora at 56.7%, declining in soil fertility (32.5%), soil water holding capacity (11.7%) and changes in soil texture (3.3%). Majority of farmers adhere to the adoption of the proposed climate smart practices with emphasis on cost effective drip irrigation systems (45.83%), soil mulching (35%) and adoption of drought resilient varieties (29.17%) to anticipate drought spells adverse. The study concludes that low adoption of improved soil conservation, integrated water management and harvesting systems and low productive and adaptive cultivars entail extreme degradation of croplands and crops productivity decline. Therefore, farmers are forced to clear more forests in search of stable and healthy soils for production and extraction of forest products to meet their food demands and improve their livelihoods conditions. Capacity building on integrated pathways of soil and land management practices are therefore needed to ensure sustainable and viable socio-ecological systems at local scale.

The increase in tobacco production while ameliorating the condition of the participant households has caused challenges to stakeholders particularly those in the governance of forest resources upon which the sector is hinged. Massive deforestation has proceeded at an alarmingly high level, in a way that threatens the long term viability of the tobacco sector and sustainability of natural forest resources. The entrance of previously disadvantaged majority into the once minority-dominated tobacco sector (and economy) in a quest to improving their livelihoods, is driving forest landscape changes that pose inherent environmental challenges including climate change. This article adopts institutional and landscape approaches to explore and explain the drivers, nexus and implications of smallholder tobacco as a livelihood strategy to the forest landscape changes and the subsequent imperative for governance of the sustainable utilization of forest resources in Zimbabwe. Drawing on documentary evidence the paper concludes that this situation poses a dilemma to forest and livelihood policies, hence the need to examine new institutional and livelihood initiatives.

Emerging countries in Southeast Asia are facing considerable challenges in addressing rising motorisation and its negative impact on air quality, traffic, energy security, liveability, and greenhouse gas emissions. Indeed, even as initial policies to address these issues are being agreed and implemented, current trends are incompatible with sustainable development and long-term climate change targets. This paper presents a comparative analysis of the approach and status of sustainable, low-carbon transport policy in ASEAN countries and identifies differences and similarities, with the aim of helping assessment of feasibility of future policies and informing future studies on policy innovations and cross-country learning. The methodology is based on the taxonomy of policy components developed by Howlett and Cashore, and our data on comprehensive country studies for Indonesia, the Philippines, Thailand and Vietnam and interviews. We find that each country has a specific set of goals, objectives and targets that support sustainable transport, and, directly or indirectly, climate change mitigation. In terms of specific instruments and calibrations, which we analyse based on the Avoid-Shift-Improve approach, there are notable differences between the countries, for example in fuel economy policy.

Marine cold air outbreaks (MCAOs) are large-scale events in which cold air masses are advected over open ocean. It is well-known that these events are linked to the formation of polar lows and other mesoscale phenomena associated with high wind speeds, and that they therefore in some cases represent a hazard to maritime activities. However, it is still unknown whether MCAOs are generally conducive to higher wind speeds than normal. Here this is investigated by comparing ocean near-surface wind speeds during MCAOs in atmospheric reanalysis products with different horizontal grid spacings, along with two case studies using a convection-permitting numerical weather prediction model. The study regions are the Labrador Sea and the Greenland–Iceland–Norwegian (GIN) Seas, where MCAOs have been shown to be important for air–sea interaction and deep water formation. One of the main findings is that wind speeds during the strongest MCAO events are higher than normal and higher than wind speeds during less severe events. Limited evidence from the case studies suggests that reanalyses with grid spacings of more than 50 km underestimate winds driven by the large ocean–atmosphere energy fluxes during MCAOs. The peak times of MCAO usually occur when baroclinic waves pass over the regions. Therefore, the strong wind episodes during MCAOs generally last for just a few days. However, MCAOs can persist for 50 days or more.

Comprising the largest population cohort on this planet, Gen Z presents a future-oriented consumer segment driven by climate change and food. This study sought to investigate Gen Zs’ perceptions to-ward plant-based foods and diets, and explore the relationship between attitude components, meal preparation involvement, personal and lifestyle factors, and perceived barriers in adopting a plant-based diet with willingness to adopt green-eating practices. Using cross-sectional data from uni-versity students in Greece, India and UK, various tools were employed to determine the factors influ-encing youths’ consumer behavior toward animal-protein substitutes. PCA indicated the underlying dimensions of students’ viewpoints on plant-based foods, whereas hierarchical and k-means clustering provided the cluster structure. An ordered probit model was estimated to delineate Gen Zs’ willingness to adopt plant-based diets and distinguish among mostly unwilling, somewhat willing and mostly willing youths. Our findings identified two consumer segments, namely proponents and opponents toward plant-based foods and diets, with statistically significant differences in the perceived health benefits of plant-based diets, attachment to animal-based proteins, perceived exclusion of ani-mal-based foods, dissatisfaction with plant-based foods attributes and demand for ensuring adequate protein intake. The ordered probit model estimates showed that there is a rather «homogeneity» in the factors influencing youths’ intention to adopt plant-based diets, with attitude components, meal prep-aration indicators, perceived barriers to eating “green” and personal factors, viz. self-assessed knowledge on healthy eating and physical activity, being strongly associated with students’ willingness to switch to plant-based diets in all three countries. Mapping potential obstacles and enablers in terms of shifting to more green-eating behaviors, our findings could add information to better understand the factors affecting food choice and youths’ transition to a more sustainable lifestyle.

During the past two decades of e-commerce growth, the concept of a business model has become increasingly popular. More recently, the research on this realm has grown rapidly, with diverse research activity covering a wide range of application areas. Considering the sustainable development goals, the innovative business models have brought a competitive advantage to improve the sustainability performance of organizations. The concept of the sustainable business model describes the rationale of how an organization creates, delivers, and captures value, in economic, social, cultural, or other contexts, in a sustainable way. The process of sustainable business model construction forms an innovative part of a business strategy. Different industries and businesses have utilized sustainable business models’ concept to satisfy their economic, environmental, and social goals simultaneously. However, the success, popularity, and progress of sustainable business models in different application domains are not clear. To explore this issue, this research provides a comprehensive review of sustainable business models literature in various application areas. Notable sustainable business models are identified and further classified in fourteen unique categories, and in every category, the progress -either failure or success- has been reviewed, and the research gaps are discussed. Taxonomy of the applications includes innovation, management and marketing, entrepreneurship, energy, fashion, healthcare, agri-food, supply chain management, circular economy, developing countries, engineering, construction and real estate, mobility and transportation, and hospitality. The key contribution of this study is that it provides an insight into the state of the art of sustainable business models in various application areas and future research directions. This paper concludes that popularity and the success rate of sustainable business models in all application domains have been increased along with the increasing use of advanced technologies.

This study presents extended Immunity Agent-Based Model (IABM) simulations to evaluate vaccination strategies in controlling the spread of infectious diseases. The application of IABM in the analysis of vaccination configurations is innovative, as a vaccinated individual can be infected depending on how their immune system acts against the invading pathogen, without a pre-established infection rate. Analysis at the microscopic level demonstrates the impact of vaccination on individual immune responses and infection outcomes, providing a more realistic representation of how the humoral response caused by vaccination affects the individual’s immune defense. At the macroscopic level, the effects of different population-wide vaccination strategies are explored, including random vaccination, targeted vaccination of specific demographic groups, and spatially focused vaccination. The results indicate that increased vaccination rates are correlated with decreased infection and mortality rates, highlighting the importance of achieving herd immunity. Furthermore, strategies focused on vulnerable populations or densely populated regions prove to be more effective in reducing disease transmission compared to randomly distributed vaccination. The results presented in this work show that vaccination strategies focused on highly crowded regions are more efficient in controlling epidemics and outbreaks. Results suggest that applying vaccination only in the densest region resulted in the suppression of infection in that region, with less intense viral spread in areas with lower population densities. Strategies focused on specific regions, in addition to being more efficient in reducing the number of infected and dead people, reduce costs related to transportation, storage, and distribution of doses compared to the random vaccination strategy. Considering that, despite scientific efforts to consolidate the use of mass vaccination, the accessibility, affordability, and acceptability of vaccines are problems that persist, investing in the study of strategies that mitigate such issues is crucial in the development and application of government policies that make immunization systems more efficient and robust.

Bacillus Calmette-Guérin (BCG) immunotherapy has been a cornerstone treatment for non-muscle invasive bladder cancer for decades and still faces challenges, such as severe immune adverse reactions, which reduce its use as a first-line treatment. This review examines BCG therapy’s history, mechanisms, and current status, highlighting how nanotechnology and bioengineering are revitalizing its application. We discuss novel nanocarrier systems aimed at enhancing BCG's efficacy while mitigating specific side effects. These approaches promise improved tumor targeting, better drug loading, and enhanced stimulation of anti-tumor immune responses. Key strategies involve using functional BCG cell wall components and co-delivering BCG with chemotherapeutics to achieve synergistic effects. While most studies remain experimental, this research direction offers hope for overcoming BCG's limitations and advancing bladder cancer immunotherapy. Further elucidation of BCG's mechanisms and rigorous safety evaluations of new delivery systems will be crucial for translating these innovations into clinical practice.

The marketing industry is rapidly evolving, necessitating educational programs to adapt and equip graduates with relevant skills and knowledge. This systematic literature review with bibliometric analysis (SLRBA) explores the integration of Problem-Based Learning (PBL) in marketing education. PBL is an instructional strategy that empowers students to solve real-life problems by integrating theory and practice, thus fostering critical thinking and decision-making skills. Our review synthesizes data from 71 sources, highlighting the definition of PBL, strategies to promote its implementation in marketing education, and the benefits and challenges associated with this approach. The findings indicate that PBL enhances student engagement, provides hands-on experience, and prepares students for real-world marketing challenges. Strategies such as using social media, serious games, e-learning, and feedback mechanisms are discussed for their effectiveness in promoting active learning and student participation. Despite its advantages, PBL faces challenges such as resource intensiveness, student resistance, and information integrity issues. This review underscores the importance of PBL in bridging the gap between theoretical knowledge and practical application, ultimately preparing marketing students to meet the demands of the industry. The paper concludes with recommendations for future research and best practices for implementing PBL in marketing education.

This paper aims to examine the potential for ecotourism development in the Pulicat Lake, a proposed Ramsar site situated in the Indian states of Andhra Pradesh and Tamil Nadu. Pulicat Lake has enormous potential for tourism and recreation; however, it is inevitable to ensure sustainable development in the region. The data for the study was collected using various methods, including case study techniques, qualitative interviews, observations, and information obtained from secondary sources. The study aimed to identify the sustainability dimensions of the location, including economic impact and income generation potentials through employment opportunities like field guides and travel companions. It is also examined the social impact on the local community and the development efforts made to reduce environmental pressures while conserving the flora and fauna. Additionally, the study discusses the possibilities and strategies for ornithological ecotourism at Pulicat Lake.

Catalytic studies for hydrogen production via steam reforming of ethanol (SRE) are essential for process optimization. Likewise, selecting the ideal support for the active phase can be critical to achieve high conversion rates during the catalytic steam reforming. In this work, copper-based catalysts were synthesized using two different supports, NaY zeolite and Nb2O5/Al2O3 mixed oxides. The materials were prepared using wet impregnation and characterized for their physicochemical properties using different analytical techniques. Differences in catalyst morphologies were readily attributed to the characteristics of the support. The Cu/NaY catalyst showed better textural properties than Cu/Nb2O5/Al2O3, resulting in a homogeneous metal dispersion over the support surface. Both catalytic systems were active in SRE, but Cu/NaY resulted in higher ethanol conversions compared to Cu/Nb2O5/Al2O3. Hence, the performance of copper-based catalysts was influenced significantly by the textural properties of the support.

Seroconversion surveys of anti-SARS-CoV-2 antibodies provide accurate estimates of the SARS-CoV-2 infection. This nationwide population-based cross-sectional serosurvey aimed to evaluate the prevalence of SARS-CoV-2 antibodies among residents in Gabon and compare the estimated cumulative number of COVID-19 cases with the officially registered number of laboratory-confirmed cases up to December 2021. Households in each province were randomly selected. Twenty-eight localities including 16 urban and 12 rural, were randomly selected to participate in the study. Whole blood samples were collected in dry tubes from all study participants around the country within 15 days. Serum samples were used to measure the total Immunoglobulin antibodies. Overall, data of 1672 households were analyzed. Out of the 3659 participants, 3175 were found positive for SARS-CoV-2 antibodies, resulting in a crude seroprevalence of 86.77%. Stratification of study participants by age group has shown highest seroprevalences in 20–29 and 40-49 age groups with 91.78% (95% CI:89.5–93.6) and 91.42% (95% CI:88.7–93.5), respectively. Nyanga province had the lowest prevalence (72,8%), and Estuaire and Ogoué-Lolo provinces had the highest prevalence (90 and 92%, respectively). Our results suggest a high transmission rate in the Gabonese population, 21 months after the first SARS-CoV-2 case in the country. This high seroprevalence estimate could indicate that the applied infection control measures may not have been adequately implemented or appropriately adhered to by the population.

With its unique properties and potential applications, nanoparticle-based delivery platforms for vac-cines have gained significant attention in recent years. Nanoparticles have the advantages of enhancing immunogenicity, targeting delivery and improving stability, providing a new solution for drug and vaccine delivery. And in some clinical studies, a variety of nanoparticle delivery platforms have been gradually applied to a wide range of vaccine applications. Current research priorities are exploring various types of nanoparticles as vaccine delivery system to enhance vaccine stability and immunogen-icity. Lipid nanoparticles have shown promising potential in preclinical and clinical studies to efficiently deliver antigens to immune cells. Moreover, lipid nanoparticles (LNPs) and other nanoparticles as nu-cleic acids especially mRNA delivery system, have shown vast potential for vaccine development. In this review, we present various vaccine platforms with an emphasis on nanoparticles for mRNA nano-vaccine delivery vehicles. We introduce several novel nanoparticles delivery platforms for mRNA vac-cine such as lipid, polymer, protein-based nanoparticle and so on. In addition, we overview the an-ti-tumor immunity of nanovaccine against different tumors in cancer immunotherapy. Finally, we give an outlook future perspectives and remaining challenges for this promising technolo-gy-nanoparticle-based delivery platforms for vaccines.

Proper Post-Activation Performance Enhancement helps to improve athletic performance. This study aimed to investigate the effects of two different velocity loss (VL), 10%VL and 20%VL, on post-activation performance enhancement (PAPE) in 20m sprint performance among sprint athletes. Twenty-four male sprint athletes (100m sprint time: 10.96±0.15 s) were recruited. A randomized crossover experimental design was used for traditional group (TG), 10%VL, and 20%VL interventions. Sprint tests were conducted at the 4th, 8th, 12th, and 16th minutes after the intervention. Two-way repeated measures ANOVA revealed an interaction effect between group and time on 20m sprint performance (F=2.817, p=0.037, partial η²=0.585). Simple effect analyses showed significant differences compared to baseline at the 4th minute for the 20%VL group (P<0.05). Cohen's d values indicated improvement in 10m sprint times at the 8th minute of the rest interval for all three intervention groups (TG: ES=-0.270, 10%VL: ES=-0.038, 20%VL: ES=-0.279). Improvement in 20m sprint times was observed at the 4th minute for the 20%VL group (ES=-0.296) and at the 16th minute for the 10%VL group (ES=-0.276). Compared to traditional PAPE schemes based on 1RM, PAPE schemes based on velocity loss (20%VL) can better induce PAPE effects in sprint athletes.

Sewage surveillance can be used as an effective complementary tool for detecting pathogens in local communities, providing insights into emerging threats and aiding in the monitoring of outbreaks. In this study using qPCR and whole genomic sewage surveillance, we detected Mpox virus along with other viruses, in municipal and hospital wastewaters in Belo Horizonte, Brazil over a 9 months period (from July 2022 till March 2023). MPXV DNA detection rates varied in our study, with 19.6% (11 out of 56 samples) detected through the hybrid capture method of whole genome sequencing and 20% (12 out of 60 samples) through qPCR. In hospital wastewaters, the detection rate was higher at 40% (12 out of 30 samples), compared to 13.3%(4 out of 30 samples) in municipal wastewaters. This variation could be attributed to the relatively low number of MPXV cases reported in the city, which ranged from 106 to 341 cases during the study period, and to dilution effects, given that each of the two wastewater treatment plants (WWTP) investigated serves approximately 1.1 million inhabitants. Additionally, nine other virus families were identified in both hospitals and municipal wastewaters including Adenoviridade, Astroviridae, Caliciviridae, Picornaviridade, Polyomaviridae, Coronaviridae (which includes SARS-CoV-2), Herspesviridae, Papillomaviridae and Flaviviridae (notably including Dengue). These findings underscore the potential of genomic sewage surveillance as a robust public health tool for monitoring a wide range of viruses circulating in both community and hospitals environments including MPXV.

Despite its growing importance as a dry beneficiation method, there is a lack of studies exploring the fundamentals aspects of dry jigging. In this sense, this study focuses on explore some essential aspects of density-based separation in dry jigs, like pulse profile, energy consumption and, especially, stratification over time, also exploring an innovative operational strategy here called “transient pulsation”. The tests were carried out using density tracers distributed across 11 density ranges (0.4-2.4 g/cm³) and employing a base bed (gravel) to analyze their segregation in a pilot-scale dry jig. Pressure drop and active power data were acquired to measure the pulse characteristics and energy consumption. The findings suggest that establishing the dry jigging cycle is more complex than in hydraulic jigs due to the compressibility of air. Stationary pulsation tests revealed an unstable behavior of stratification over time, contrasting with traditional hydraulic jigs, while transient pulsation tests unveiled varied trends in separation quality. Energy consumption analysis underscored the significant role of the blower drive. These insights have the potential to inform operational enhancements in dry jigging.

We construct a Bayesian estimator for the dilution of a wastewater sample. When wastewater is diluted by rainwater an estimate of the level of dilution is required if we are to normalise sample measurements of disease markers such as SARS-CoV-2 RNA. We consider the situation where flow measurements are available, but will regularly be unreliable because of the action of combined sewer outflows (CSOs) and wastewater storage tanks, which divert wastewater away from treatment plants when the flow is excessive. However, we also have proxies for the flow from various chemical markers (e.g.\ phosphate, ammonium, electrical conductivity), whose level per unit of population is fixed. The new flow estimator has multiple advantages compared to existing procedures: credible intervals for the estimates; optimal weighting of the chemical markers; systematic handling of missing and censored values; and model based smoothing without lags.

Glioblastoma (GBM) is the most common malignant brain tumor in adults. Despite advancements in treatment, the prognosis for patients with GBM remains poor due to its aggressive nature and resistance to therapy. CRISPR-based genetic screening has emerged as a powerful tool for identifying genes crucial for tumor progression and treatment resistance, offering promising targets for tumor therapy. In this review, we provide an overview of the recent advancements in CRISPR-based genetic screening approaches and their applications in GBM. We highlight how these approaches have been used to uncover genetic determinants of GBM progression and susceptibility to various therapies. Furthermore, we discuss ongoing challenges and future directions of CRISPR-based screening methods in advancing GBM research.

Using UAV-based multispectral images for quickly and accurately monitoring chlorophyll content is critical for field management and yield estimation. However, the lower model accuracy and the poor robustness of the estimation models are still preventing the widespread application of UAV-based multispectral images. We carried out two field trials at various experimental sites to further enhance the precision and applicability of the model used to estimate the chlorophyll content of potato plants. Firstly, the texture features and vegetation indices derived from multispectral images were screened using the Pearson correlation coefficient method, and Normalized difference red edge (NDRE) performed the best over the two growth periods. Secondly, principal component analysis (PCA) was applied to recombine five bands of multispectral images, and third PCA results (PCA3) was selected to combined with NDRE according to the construction principle of NDRE, and the newly constructed parameter was named improved NDRE (INDRE). Finally, INDRE was used to establish a chlorophyll content estimation model of potato plants, and compared with some traditional parameters. The results demonstrated that the INDRE had the maximum accuracy (R2 = 0.7865, RMSE = 2.1378), and corresponding R2 increased by 0.1481 and RMSE decreased by 1.2994 than NDRE. Additionally, the model was validated using independent data from Experiment 2, and INDRE considerably increased estimation accuracy compared to other factors. In conclusions, the INDRE suggested in this study significantly enhances the accuracy and applicability of the chlorophyll content inversion model and can serve as an additional reference for fertilization management.

The escalating levels of atmospheric carbon dioxide (CO₂) due to anthropogenic activities have raised significant concerns regarding their far-reaching consequences, including potential impacts on human brain function. This study employs Agent-Based Modeling (ABM) and a comprehensive literature review to comprehensively examine the effects of varying atmospheric CO₂ concentrations on human brain activity. Historical and projected CO₂concentration data, along with neuroscientific insights, were integrated into the ABM framework to simulate brain activity responses under different CO₂ scenarios. The simulations revealed that elevated CO₂ levels disrupt neural activity and alter neurotransmitter profiles, indicating potential cognitive consequences. Sensitivity analysis emphasized the importance of accurate parameterization for robust simulations. The findings underscore the urgent need to address global CO₂ emissions to preserve cognitive health. Further research is essential to validate and refine the model, incorporating additional factors for a comprehensive understanding of the cognitive repercussions of rising CO₂ levels, crucial for informed policy-making and public awareness campaigns.

Among the various types of gas sensors, the chemoresistive gas sensors based on metal oxides are considered the most attractive ones due to their simple operation, low costs and miniaturization. Thin films of V2O5 undoped and doped with TiO2 were studied as nitrogen dioxide, methane and hydrogen sensors. The experimental kinetics of the electrical conductivity changes due to introduction and removal of gas on metal oxide gas sensors were successfully explained in terms of the Langmuir adsorption theory.

Background: Recent research suggests a concerning trend of non-suicidal self-injury (NSSI) and suicidal behaviors emerging at younger ages (as early as age 12). Early onset of NSSI is linked to more severe outcomes. While universal school-based prevention programs have shown promise in addressing suicidal behaviors, there's limited research on their effectiveness in preventing NSSI onset among adolescents. This study aims to evaluate the efficacy of a universal prevention program in schools for NSSI and mental complaints while enhancing resilience and mental health in 11-14-year-old adolescents. Methods: In total, 329 Flemish secondary school students (55.6% female), aged 11 to 14 years, participated in a 4-hour classroom universal prevention, with a focus on emotion regulation, mental health, and specific strategies to prevent NSSI and reduce stigma. For both the intervention and control group (N = 124), a pre-, post- and one-month follow-up questionnaire was administered, containing reliable and valid measures for NSSI and suicidality, emotion regulation, help-seeking behaviors, well-being, and psychological distress. Results: The prevention program effectively reduced NSSI and psychological distress, particularly for adolescents with a history of NSSI. Conclusions: These findings support previous research on the effectiveness of school-based programs in reducing mental complaints and suggest promising outcomes for NSSI prevention.

System-of-systems (SoS) evolution is a complex and unpredictable process. Although various principles to facilitate collaborative SoS evolution have been proposed, there is a lack of experimental data validating their effectiveness. To address these issues, we present an Agent-Based Model (ABM) for SoS evolution in the Internet of Vehicles (IoV) , serving as a quantitative analysis tool for SoS research. By integrating multiple complex and rational behaviors of individuals, we aim to simulate real-world scenarios as accurately as possible. To simulate the SoS evolution process, our model employs multiple agents with autonomous interactions and incorporates external environmental variables. Furthermore, we propose three evaluation metrics: evolutionary time, degree of variation, and evolutionary cost, to assess the performance of SoS evolution. Our study demonstrates that enhanced information transparency significantly improves the evolutionary performance of distributed SoS. Conversely, the adoption of uniform standards only brings limited performance enhancement to distributed SoSs. Although our proposed model has limitations, it stands out from other approaches that utilize Agent-Based Modeling to analyze SoS theories. Our model focuses on realistic problem contexts and simulates realistic interaction behaviors. This study enhances the comprehension of SoS evolution processes and provides valuable insights for the formulation of effective evolutionary strategies.

Objective: The aim of this in vitro study was to evaluate the accuracy of resin-based fixed dental restorations, namely veneers, single crowns, and four-unit fixed partial dental prosthesis (FPDs) using two different 3D printers and polymer-based materials. Materials and Methods: A standard maxillary polyurethane jaw model containing prepared teeth was scanned using an intraoral scanner. The generated STL data were used to design the restorations virtually using CAD software. Two 3D printers were utilized for the provisional digital light processing and stereolithography for the castable resin patterns. Each printer produced 10 specimens of each type of restoration, for a total of 80 restorations. The 3d-printed restorations were then 3D scanned using the same intraoral scanner and evaluated for external and internal dimensional accuracy in terms of trueness and precision. A one-way ANOVA and Two-sample T-Test were implemented to compute the precision (variability between groups) and trueness (with the designed CAD model). A level of statistical significance of p-Value

Agriculture is an important sector of European Union in societal , economic and environmental dimensions. Sustainability of the sector require improvements in its key operations. Weeding is one of the crucial operation having impact on farms’ productivity, safety for farmers, food security and environmental state. To achieve EU policy goals of sustainable agriculture there are needed new technical and organizational solutions. One of the advanced techniques are laser based weeding technique. It is important to understand well the impacts of introduction of these tech-niques to the markets and agricultural practice in sustainability context. For that reason Social Life Cycle Assessment was performed. The method was based on participatory approach. The as-sessment was carried in three perspectives: general society, farmers, and business perspective re-lated to agriculture. Expert interviews based on questionnaires and workshops were realized to get the opinions on the impacts of a new laser technique on particular aspects of its implementation. The results show generally positive impact in all perspectives, especially in the perspective of farmers.

Background: This study aimed to develop and evaluate a dietary self-care promotion program for hemodialysis patients based on Hurley's self-efficacy model. Methods: The needs of hemodialysis patients were identified, and an online community-based dietary self-care promotion program was developed with expert evaluations. 44 hemodialysis patients were randomly assigned to an experimental group (n=22) and a control group (n=22). The program was applied to the experimental group for four weeks. Before and after the intervention, as well as four weeks after the intervention, dietary self-efficacy, dietary self-care behavior, interdialytic weight gain, serum phosphorus, and serum potassium were assessed in both groups. Results: Significant differences over time and between groups were observed in dietary self-efficacy, interdialytic weight gain, serum phosphorus, and serum potassium. The interaction between time and group was also significant. While no significant differences were found over time in dietary self-care behavior, significant group differences and interaction effects between time and group were identified. Conclusions: The results indicate that the dietary self-care promotion program using an online community for hemodialysis patients is more effective in enhancing dietary self-efficacy and dietary self-care behavior compared to conventional treatment. This suggests the clinical applicability of the proposed dietary self-care promotion program.

Treatment wetlands (TWs) are Nature-Based Solutions increasingly used worldwide for wastewater (WW) treatment able to remove mineral and organic pollutants through both physical and biochemical process. Besides the reusable effluent, the TWs produce as main output plant biomass that need to be harvested and disposed at least once a year with significant management costs and TW temporary out of service. This study aims (i) to evaluate the potential of TWs biomass for local energy production and (ii) to understand TW hydraulic conductivity (Ks) effects on the biomass biomethane yield. Specifically, it was addressed by determining the Biochemical Methane Potential of common reed (CR) (Phragmites australis) samples collected at three harvest times from the 10-years-old horizontal subsurface treatment wetland (HSTW) used as a secondary WW treatment system for the IKEA® store located in Catania (Eastern Sicily, Italy). Furthermore, the falling head test was conducted to assess the hydraulic conductivity (Ks) variation in the HSTW, in order to understand the influence on the CR biomethane production. Average methane content values were 130.57 Nm3CH4/tVS (±24.29), 212.70 Nm3CH4/tVS (±50.62) and 72.83 Nm3CH4/tVS (±23.19) in August, September, October 2022, respectively. Ks was correlated with both dry matter (R2 = 0.58) and fiber content (R2 = 0.74) and, consequently, affected the biomethane yield that increased at the Ks increases (R2 = 0.30 in August, R2 = 0.57 in September). In the framework of a circular economy, results showed the successfully possibility of integrating the bioenergy production into TWs. The research could contribute (i) to encourage plant operators to reuse biomass from TWs for local energy production and (ii) to help plant operators to understand Ks effects on the biomass biomethane yield, in order to increase the sustainability of the system and to reduce the maintenance costs.

Large-scale crowd phenomena are complex to model because the behaviour of pedestrians needs to be described at both strategic, tactical, and operational levels and is impacted by the density of the crowd. Microscopic models manage to mimic the dynamics at low densities, whereas mesoscopic models achieve better performances in dense situations. This paper proposes and evaluates a novel agent-based architecture to enable agents to dynamically change their operational model based on local density. The ability to combine microscopic and mesoscopic models for multi-scale simulation is studied through a use case of pedestrians at the Festival of Lights, Lyon, France. Pedestrian outflow data is extracted from video recordings of exiting crowds at the festival. The hybrid model is calibrated and validated using a genetic algorithm that optimizes the match between simulated and observed outflow data. Additionally, a local sensitivity analysis is then conducted to identify the most sensitive parameters in the model. Finally, the performance of the hybrid model is compared to different models in terms of density map and computation time. The results demonstrate that the hybrid model has the capacity to effectively simulate pedestrians across varied density scenarios while optimizing computational performance compared to other models.

In an IoT system, the sheer volume of data generated by numerous sensing devices necessitates a well-designed scheme for storing and retrieving data efficiently, enabling streamlined data processing and analytics. One promising storage architecture involves utilizing solid-state drives (SSDs) to cache data from hard disk drives (HDDs), thereby creating an SSD-based caching storage system. To further enhance access performance, it is possible to employ readahead techniques to minimize data access latency. However, the existing Linux readahead scheme falls short in fully leveraging SSD-based caching storage systems. We address this limitation by introducing a novel cross-layered readahead architecture that effectively communicates with the VFS layer, the file system layer, and the block I/O layer. This communication facilitates the acquisition of readahead timing, readahead data continuity, and readahead data location, respectively. To guide prefetching decisions, our architecture analyzes the degree of data access sequentiality, the performance model of the target storage device, and the access patterns of the I/O workload on the corresponding storage device. The implementation of this new architecture in the Linux kernel yields promising experimental results, demonstrating its robustness by consistently outperforming the stock Linux kernel. Notably, our architecture reduces the total execution time of the stock Linux kernel by up to 49%, except in cases of random workloads where both the stock Linux kernel and our architecture exhibit similar performance.

Plantation-based farmer cooperatives play an important role in promoting agricultural modernization and increasing farmer income, and the management of business risks of such cooperatives not only influences the development of the cooperatives themselves, but also concerns the interests of farmers. Based on the survey data of 226 sample cooperatives from Guizhou province, this article uses factor analysis to measure business risks of plantation-based farmer cooperatives and carries out empirical tests on influence factors of business risks through structural equation model. According to the research results, the ordering of business risks of plantation-based farmer cooperative based on their significance is as follows: market risk > policy risk > natural risk > technical risk > management risk. Influence factors including policy environment, economic environment, social service environment, technical environment, resource endowment of the cooperative and manager characteristics have significant positive influence on the cooperative, with economic environment and manager characteristics generating relatively stronger influence and social service environment generating relatively weaker influence. Through this research, several policy implications on driving high-quality development of plantation-based farmer cooperative are made, including specifying supportive policies of plantation-based farmer cooperative, improving economic environment of agricultural market, upgrading agricultural infrastructure, depending reform of land transfer system, and enhancing internal management of the cooperative.

The objective of this study is to evaluate how two varying amounts of sepiolite-based powder, infused with indigo extract, affect the appearance and durability of a water-based white primer. To examine the influence of this eco-friendly pigment on the coatings' overall appearance, assessments were performed for color, gloss, and surface roughness. Additionally, the coatings were investigated through optical and electron microscopic observations, to evaluate the distribution of the pigment within the polymer matrix. The effect of the pigment on the coating's durability was assessed through accelerated tests, including exposure in a salt spray chamber and a UV-B chamber. These tests aimed to evaluate the emergence of defects and changes in the appearance of the samples over time. Furthermore, the impact of different quantities of sepiolite-based powder on the coating's ability to act as a barrier was assessed using liquid resistance tests and contact angle measurements. These evaluations aimed to understand how the coating responded to various liquids and its surface properties concerning repellency or absorption. In essence, this study underscores the considerable influence of the eco-friendly pigment, demonstrating its capacity to introduce unique color and texture variations to the paint. Moreover, the inclusion of the pigment has enhanced the coating's color stability, its ability to act as a barrier, and overall durability when exposed to harsh environments.

In this research, we present the first steps taken towards a data-driven agent-based model (ABM) specifically designed for simulating infectious disease dynamics in Greece. Amidst the ongoing COVID-19 pandemic caused by SARS-CoV-2, this research holds significant importance as it can offer valuable insights into disease transmission patterns and assist in devising effective intervention strategies. To the best of our knowledge, no similar study has been conducted in Greece. We constructed a prototype ABM that utilizes publicly accessible data to accurately represent the complex interactions and dynamics of disease spread in the Greek population. By incorporating demographic information and behavioral patterns, our model captures the specific characteristics of Greece, enabling accurate and context-specific simulations. By using our proposed ABM, we aim to assist policymakers in making informed decisions regarding disease control and prevention. Through the use of simulations, policymakers have the opportunity to explore different scenarios and predict the possible results of various intervention measures. These may include strategies like testing approaches, contact tracing, vaccination campaigns, and social distancing measures. Through these simulations, policymakers can assess the effectiveness and feasibility of these interventions, leading to the development of well-informed strategies aimed at reducing the impact of infectious diseases on the Greek population. This study is an initial exploration toward understanding disease transmission patterns and a first step towards formulating effective intervention strategies for Greece.

Rapid haemostasis during surgery is essential when one wants to reduce the duration of opera-tions, reduce the need for transfusions, and above all when one wants to achieve better patient management. The use of haemostatic agents, sealants and adhesives improves the haemostatic process by offering several advantages, especially in vascular surgery. These agents vary widely in their mechanism of action, composition, ease of application, adhesion to wet or dry tissue, im-munogenicity and cost. The most used are cyanoacrylate-based glues (Glubran 2) or polysaccharide hydrogel-microsphere powder (AristaTMAH). This work is based on a retrospective study carried out on a sample of patients with different vascular diseases (FAV, pseudoaneurysm and PICC application) in which two different haemostatic sealants were used. The aim was to assess the safety, the advantages and the ability of both sealants to activate the haemostatic process at the affected site, also in relation to their chemical-physical characteristics. The obtained results showed that the application of Glubran 2 and AristaTMAH as surgical wound closure systems is effective and safe as the success achieved was ≥94% on anastomoses of FAV; 100% on stabilization of Picc catheters; ≤95% on pseudoaneurysms.

The study aims to evaluate the Quorum Sensing (QS) system inhibition against some Gram-positive and Gram-negative bacteria detected by molecular modeling of R. cathartica L. plant extract. R. cathartica L. methanol extract was evaluated in vitro. The research was carried out for the possible role and mechanism of R. cathartica L. The antibacterial activity of R. cathartica L. seed extract on some Gram-positive and Gram-negative strains was evaluated using culture-based and computational analysis. Gentamicin (CN; 30 µg/ml, Bioanalyse) was used as an antibacterial control of the extract on the production potential of QS-dependent virulence factors on Pseudomonas aeruginosa PAO1 was investigated. Phytochemical analysis resulted in the identification of 23 phenolic phytochemicals. R. cathartica L. extract was observed to have antimicrobial activity against Gram-positive and Gram-negative bacteria at different rates (11.3 mm-16 mm). The inhibitory effect of R. cathartica L. extract on P. aeruginosa PAO1 (elastase 61%, pyocyanin 18%, and biofilm 61%) was recorded moderately. Phytochemical analysis revealed that the main component of the extract is kaempferol. Therefore, the binding potential of kaempferol on QS system receptors was investigated via molecular docking. Computational analysis showed that kaempferol can inhibit the QS system by preventing competitive ligands from connecting to LasR. This study explored the activity and mechanism of action for a new green alternative against resistance. might provide a mechanism for R. cathartica L. seed extract components and thus provide a new avenue for using R. cathartica L. seed extract as a green antibacterial agent.

3D printing with earth-based mortar is still under development and faces challenges. Optimizing the mortar mixture, improving structural strength, determining the relationship between printing speed and the amount of extruded material, and ensuring long-term durability are areas that are still being refined. Additionally, regulatory and certification issues must also be considered to ensure the safety and compliance of 3D printed structures. This paper presents for discussion the records, analyses, studies, and considerations regarding the initial initiatives involving 3D printing with the extrusion of earth-based mortar developed at the Faculty of Engineering of the University of Porto - FEUP. Through this work, it is possible to strengthen and reaffirm that 3D printing with earth-based mortar has significant potential in the construction industry and that the incorporation of dispersed kraft paper fibres from the recycling of cement bags is an excellent resource to achieve good constructability in 3D printing with earth-based mortar.

This paper presents an approach to teacher identity heritage as result of the implementation of a research device created through Arts-based Research (ABR) methods, specifically with video elicitation and video essay used as research tools. Two main objectives were raised. The first one, to establish the real relevance of focusing performance on teacher identity. The second one, testing a new methodological proposal specifically designed for this purpose, but still useful in other contexts where heritage identity is as present as in teaching. The device, Body-camera, involves a process that allows new ways to understand the creation of identities using video to encourage the production of new meanings by visual and oral data. The participants were teachers in training during their internship period. Some notions about teachers' identity heritage were revealed, and also preserved, firstly, through personal perspectives by video elicitations and secondly, through collective perspectives by video essays. Both are video structures used in ABR which mix creative experience, memories, life experiences, relationships and links that shape the teachers’ professional identity.

LR004 is a novel chimeric (human/mouse) monoclonal antibody developed for the treatment of advanced colorectal carcinoma with detectable epidermal growth factor receptor (EGFR) expression. We aimed to investigate the preclinical pharmacokinetics (PK) and in vivo biodistribution of LR004. The PK profiles of LR004 were initially established in rhesus monkeys. Subsequently, 125I radionuclide-labeled LR004 was developed and its binding activity to the EGFR antigen were evaluated. Furthermore, the biodistribution, autoradiography, and NanoSPECT/CT of 125I-LR004 in xenograft mice bearing A431 tumors were examined. The PK data revealed a prolonged half-life and nonlinear PK characteristics of LR004 within the dose range of 6–54 mg/kg. The radiochemical purity of 125I-LR004 was approximately 98.54%, and iodination of LR004 did not affect its specific binding activity to the EGFR antigen. In a classical biodistribution study, 125I-LR004 exhibited higher uptake in highly perfused organs than in poorly perfused organs. Prolonged retention properties of 125I-LR004 in tumors were observed at 4 and 10 days. Autoradiography and NanoSPECT/CT confirmed the significant accumulation and sustained retention of 125I-LR004 at the tumor site in xenograft mice. These findings demonstrated the adequate tumor targeting capabilities of 125I-LR004 in EGFR-positive tumors, which may improve dosing strategies and future drug development.

Since sensor-based perception systems are used in autonomous vehicle applications, validating such systems is imperative to guarantee the robustness of the systems before they are being put to use. In this study, a comprehensive corruption-related simulation-based robustness verification and enhancement process for sensor-based perception systems is proposed. Firstly, we present a methodology and scenario-based corruption generation tools for creating diverse simulated test scenarios that can analogously represent real-world traffic environments, especially considering corruption types related to safety concern. Then, an effective corruption similarity filtering algorithm is proposed to remove corruption types with high similarity and identify the representative corruption types to represent all considered corruption types. As a result, we can generate efficient corruption-related robustness test scenarios with less testing time and good scenario coverage. Subsequently, we perform the vulnerability analysis of object detection models to identify model weaknesses and construct an effective training dataset for model vulnerability enhancement. This enhances the tolerance of object detection models to weather and noise-related corruptions, ultimately improving the robustness of the perception system. We employ case studies to demonstrate the feasibility and effectiveness of the proposed robustness verification and enhancement procedures. Additionally, we explore the impact of different "similarity overlap threshold" parameter settings on scenario coverage, effectiveness, scenario complexity (size of training and testing datasets), and time costs.

Water scarcity challenges have necessitated the adoption of water-saving techniques in protected and nom-protected farming. This study aimed to assess the performance of a water-saving soil-less cultivation technique and to compare it with conventional soil-based cultivation in protected farming. The soilless technique used local gravel and a mixture of peat-moss, humin-substrate, and perlite in ratios of 4:3:1.5. Three irrigation regimes were imposed using emitters 8Lh-1 design discharge (D1) emitters with 6Lh-1 design discharge (D0.75) and 4Lh-1 de-sign discharge (D0.5) for the two cultivation methods during the growth cycle of tomato by drip irrigation. The vegetative growth, fruit yield and water consumption were measured and water productivity was determined. Moreover, an economic assessment was carried out by estimating and comparing economic coefficients for the two cultivation methods. Estimated coefficients include revenues, net profit, benefit-cost ratio, break-even levels of production and prices, revenues over variable cost, and revenues on investment. The tomato fruit yield under soil-based cultivation overtopped the yield under soilless cultivation. The water productivity under the soilless cultivation was almost twice that (24.3 kg m-3) of the soil-based cultivation (15.5 kg m-3). The soilless cultivation saved 50% of irrigation water applied by the conventional soil-based method, saving energy and soil from deterioration. Revenues and net profits stimulated by higher yield coupled with lower variable cos supported the soil-based cultivation. The economic assessment showed that both cultivation methods were economically viable. However, the soil-based cultivation method was more profitable due to its higher fruit yield. Overall, the results of this study suggest that the soilless cultivation technique is a viable option for wa-ter-saving cultivation. However, the soil-based cultivation method is still more profitable due to its higher fruit yield

This work introduces an innovative approach that unites a PIDND2N2 controller and the balanced arithmetic optimization algorithm (b-AOA) to enhance the stability of an automatic voltage regulator (AVR) system. The PIDND2N2 controller, tailored for precision, stability, and responsiveness, mitigates the limitations of conventional methods. The b-AOA optimizer is obtained through integration of pattern search and elite opposition-based learning strategies into the arithmetic optimization algorithm. This integration optimizes the controller parameters and the AVR system's response, harmonizing exploration and exploitation. Extensive assessments, including evaluations on 23 classical benchmark functions, demonstrate the efficacy of the b-AOA. It consistently achieves accurate solutions, exhibits robustness in addressing a wide range of optimization problems, and stands out as a promising choice for various applications. In terms of AVR system, comparative analyses highlight the superiority of the proposed approach in transient response characteristics, with the shortest rise and settling times and zero overshoot. Additionally, the b-AOA approach excels in frequency response, ensuring robust stability and a broader bandwidth. Furthermore, the proposed approach is compared with various state-of-the-art control methods for the AVR system, showcasing impressive performance. These important results underscore the significance of this work, setting a new benchmark for AVR control by advancing stability, responsiveness, and reliability in power systems.

3D human pose estimation has made significant advancements through the integration of deep learning techniques. This survey provides a comprehensive review of recent 3D human pose estimation methods, with a focus on monocular images, videos, and multi-view cameras. Our approach stands out through a systematic literature review methodology, ensuring an up-to-date and meticulous overview. Unlike many existing surveys that categorize approaches based on learning paradigms, our survey offers a fresh perspective, delving deeper into the subject. For image-based approaches, we not only follow existing categorizations but also introduce and compare significant 2D models. Additionally, we provide a comparative analysis of these methods, enhancing the understanding of image-based pose estimation techniques. In the realm of video-based approaches, we categorize them based on the types of models used to capture inter-frame information. Furthermore, in the context of multi-person pose estimation, our survey uniquely differentiates between approaches focusing on relative poses and those addressing absolute poses. Our survey aims to serve as a pivotal resource for researchers, highlighting state-of-the-art deep learning strategies and identifying promising directions for future exploration in 3D human pose estimation.

This study aims to evaluate the combined assimilation of AGRI infrared radiance and ground-based MWR (Microwave Radiometer) data for predicting short-duration heavy rainfall. The WRFDA 4.3 framework is utilized to establish the data assimilation interface. The structural characteristics of this joint assimilation approach are analyzed using a typical heavy rainfall event in the Kaifeng region of Central China. The findings indicate the following: (1) The joint assimilation of FY-4A AGRI and ground-based MWR data effectively corrects the initial moisture content in model simulations. Data assimilation significantly improves the simulation of 24-hour accumulated rainfall. Furthermore, the joint assimilation of AGRI radiance and MWR data outperforms assimilating either of them individually; (2) In the heavy rainfall stage, from the low level to the high level, strong upward movement occurs in the center of the rainstorm. The water vapor in the process of this rainstorm mainly comes from the westward air transport in front of the high trough. The water vapor is continuously transported to the heavy rainfall belt through this channel, providing sufficient water vapor for the maintenance of the rainstorm; (3) The combination of the interaction between high and low level vorticity and divergence in the atmosphere and the vertical upward movement, the emergence of low level jet and the generation of unstable energy in the atmospheric environment jointly lead to the occurrence of the rainstorm process; and (4) The terrain-sensitive experiment results show that, the existence of the topography of Taihang Mountain changes the precipitation in Kaifeng area, and reducing the terrain height will lead to a 50%-60% decrease in the overall precipitation of the precipitation center, and the precipitation range will also be greatly reduced. An increase of more than 50% in terrain height will lead to an increase in precipitation center, precipitation range and precipitation intensity, and an increase of 10%-20% in overall precipitation; An increase of more than 75% in the terrain height will cause the rain belt to shift eastward by about 0.5°E, and the precipitation center will shift significantly eastward. When the terrain height increased by more than 100%, the precipitation did not continue to increase, which was basically the same as the control test. This paper provides a valuable basis for further improving the application of FY-4A AGRI radiance and ground-based microwave radiometer in numerical weather models.

Women's attitudes towards domestic violence play an important role in shaping the social acceptance of domestic violence, acting as both a known predictor of victimization and an indicator of disclosure and help-seeking behavior. Therefore, the study objectives were 1) to conduct a nationwide analysis to explore the factors associated with the acceptance of domestic violence among Iraqi women according to the social-ecological framework, and 2) to identify the most vulnerable women according to the spatial distribution of Iraqi governorates. This cross-sectional study was conducted using secondary data analysis from the 2018 Iraq Multiple Indicator Cluster Survey (MICS 6), which included 19,443 married Iraqi women. Logistic regression was employed to examine the factors associated with acceptance of domestic violence. In this study, the analyses were performed according to the Social Ecological Model (SEM). This study revealed that 48.4% of married Iraqi women accepted domestic violence. Yet, women living in South/Central regions of Iraq showed a higher prevalence of domestic violence acceptance namely Anbar, Salahaddin Thiqar, and Misan where the prevalence was (62%-73%). Several factors across the social-ecological model were associated with a higher likelihood of women accepting such behavior, including experiencing functional difficulty, having lower educational attainment, being married to a blood-related husband, and being married to a husband who has multiple wives/partners, living in poverty, residing in rural areas, living in the south and central regions of Iraq, and feeling unsafe in the neighborhood. Conversely, factors that were associated with a lower likelihood of women accepting such behavior were owning a mobile phone and using a computer or tablet. This study provides policymakers with valuable insights to comprehensively assess indicators of attitudes toward domestic violence against women. It also addresses the scarcity of information on the acceptance of domestic violence in Iraq on national and governorate levels, emphasizing the need for urgent national-level policy discussions to achieve key Sustainable Development Goals related to gender equity and good health and well-being.

Coseismic landslides pose significant threats, causing widespread destruction of buildings, roads, pipelines, and leading to numerous casualties. In recent years, the frequency of earthquakes has increased, prompting a growing interest in regional-scale assessment techniques for coseismic landslides. The infinite slope model proposed by Newmark is widely used to evaluate coseismic landslide hazard. However, the infinite slope model fails to reflect the impact of rock mass structure on the stability of slopes. This paper proposes a novel approach for mapping the hazards of coseismic landslides by considering the roughness of the potential slide surfaces in the inner slope. The proposed method is validated using data from the 2013 Lushan earthquake. The datasets, including geological units, peak ground acceleration (PGA), and high-resolution digital elevation models of topography, are rasterized at a grid spacing of 30 meters. They are then combined within an infinite slope model based on Newmark permanent-deformation analysis, enabling the estimation of coseismic landslide displacement in each grid area resulting from the Lushan earthquake. The modeled displacements are compared with the inventory of landslides triggered by the Lushan earthquake, allowing the derivation of a confidence level function that relates predicted displacement to the spatial variation of coseismic landslides. Ultimately, a hazard map of coseismic landslides is generated based on the established confidence level function. This map serves as a valuable tool for predicting the hazard zone of seismic regions and offers essential insights for decision-making related to infrastructure development and post-earthquake construction.

Cyber-Physical Systems (CPS) play an essential role in today’s production processes, leveraging Artificial Intelligence (AI) to enhance operations such as optimization, anomaly detection, and predictive maintenance. This article reviews a cognitive architecture for artificial intelligence, which has been developed to establish a standard framework for integrating AI solutions into existing production processes. Given that machines in these processes continuously generate large streams of data, Online Machine Learning (OML) was identified as a crucial extension to the existing architecture. To substantiate this claim, real-world experiments using a slitting machine were conducted to compare the performance of OML with traditional Batch Machine Learning. The evaluations clearly indicate that OML adds significant value to CPS and is strongly recommeded as an extension of related architectures such as the cognitive architecture for AI discussed in this article. Additionally, surrogate model-based optimization is employed to determine the optimal hyperparameter settings for the corresponding OML algorithms, aiming to achieve peak performance in their respective tasks.

Within an amplicon-based metagenomic study of Archaea, Fungi, and Bacteria in Livingston Island, Maritime Antarctica, in many of the samples antagonisms between these three super kingdoms were observed under the form of an inversely proportional dependence of the richnesses of the three types of microorganisms. This was quantified - based on the observed numbers of the total tags and the numbers of the operational taxonomic units (OTUs), as well as based on four alpha diversity parameters – the Shannon, the Simpson, the Chao1, and the ACE indices. We found that the most discriminative results in the antagonism measuring were observed in the comparison of the numbers of the OTUs and the ACE community richness estimator. The antagonism between Archaea and Fungi was strongest, followed by that of Archaea and Bacteria. The Fungi-Bacteria antagonism was slightly detectable. Pearson and Spearman correlation analysis also showed a statistically significant negative correlation between the fungal and archaeal effective tags, while the correlation between archaeal and bacterial diversity was positive. Indications of the order of primary microbial succession in barren ecological niches were also observed, demonstrating that Archaea and Bacteria are the pioneers, followed by Fungi which in time would displace Archaea.

Background: The target volume for post-mastectomy radiation therapy (PMRT) in breast cancer patients with reconstruction has been a subject of debate. This study aimed to assess the radiation dose distribution and treatment outcomes associated with different chest wall (CW) delineation according to ESTRO ACROP guideline for patients underwent implant-based reconstruction. Methods: We conducted a retrospective review of breast cancer patients who underwent mastectomy followed by two-stage implant-based breast reconstruction and adjuvant radiation therapy (RT) between 2007 and 2022. The expanders/implants were positioned retropectorally. The chest wall target volumes were categorized into two groups: the prepectoral group, which excluded the deep lymphatic plexus, and the whole expander group. Results: The study included 26 patients, 15 in prepectoral group and 11 in whole expander group. No significant differences were observed in normal organs exposure between the two groups. There was a trend toward a lower ipsilateral lung mean dose in the prepectoral group (10.2 vs. 11.1 Gy, p=0.06). Both groups exhibited limited instances of reconstruction failure and local recurrence. Conclusions: For patients undergoing two-stage expander-implant retropectoral breast reconstruction and PMRT, our data have provided comparable outcomes and normal organs exposure for those omitting the deep lymphatic plexus.

This study assesses the impact of incorporating an adaptive learning mechanism into an agent-based model (ABMS) simulating behavior on a university campus during the course of a pandemic outbreak, with a particular case on the COVID-19 pandemic. The aim is to reduce overcrowding and infections on campus through the use of Reinforcement Learning (RL). Our findings indicate that RL is a viable approach for effectively representing agents’ behavior within this context. The results reveal specific temporal patterns of overcrowding violations. While our study successfully mitigated campus crowding, it had limited influence on altering the course of the epidemic. This highlights the necessity for comprehensive epidemic control strategies that consider the role of individual decision-making influenced by adaptive learning, along with the implementation of targeted interventions. This research significantly contributes to our understanding of adaptive learning within complex systems and offers valuable insights for shaping future public health policies in similar community settings. Future research directions encompass exploring various parameter settings and updating representations of the disease’s natural history.

The growing population with changing consumption patterns in developing countries is causing significant challenges with regards to solid waste management. Plastic wastes are particularly problematic, with single-use plastics leaking into the environment, including the marine environment, at an unprecedented rate. Approximately 80 percent of ocean plastics come from land-based sources or about 8 million tons are dumped into the ocean every year. Thailand was identified as one of the top 10 countries ranked by mass of mismanaged plastic wastes, with more than 60,000 tons per year entering the ocean through multiple outlets, including rivers. In the environment, plastic wastes can be degraded into small sizes (less than 5 mm), called microplastics (MPs), which could contaminate the ecosystems and the food chain, including foodstuffs and water supply. Tap water samples collected from a water supply treatment plant and Academic Institutions 1 and 2 in central Thailand were found to contain MPs about 304 ±90, 270 ±109 and 386 ±102 particles/L, respectively. In addition, MPs concentrations of 211 ±70 and 122 ±60 particles/L were also found in drinking water samples collected from commercial bottled water and membrane filtration water, respectively. The MPs sizes of 0-50 µm were most abundant in both the tap and drinking water samples whose shapes were mainly fragments and fiber. These data indicated potential health risks to the people who consume these water sources, and recommendations for health impacts minimization were proposed.

Following on from work already carried out in our laboratory on a new biomass-derived green solvent, eucalyptol, we are now turning our attention to sabinene as a new green solvent. Sabinene is also derived from biomass. We have shown that it can be used as such or distilled to synthesize thiazolo[5,4-b]pyridine heterocycles by thermal or microwave activation. This new solvent was compared with various conventional and green solvents. The conditions were optimized to enable us to carry out the syntheses in good yields, and we were able to show that sabinene, a natural bicyclic monoterpene, could be used effectively as a solvent.

We designed a bidirectional reflection distribution function (BRDF) measurement system to research the characteristics of space target materials. This system measures the BRDF data of an aluminum plate and gold foil. A hybrid biogeography-based optimization-firefly (BBO-Firefly) algorithm was proposed to optimize the five-parameter BRDF model. To check the performance of the hybrid BBO-Firefly algorithm, we set up a contrast experiment to optimize the BRDF parameters using the BBO algorithm, Firefly algorithm, and hybrid BBO-Firefly algorithm. The experimental results prove that the hybrid BBO-Firefly algorithm surpasses the BBO algorithm and Firefly algorithm in convergence speed and precision in the same situation and has a better optimization effect. Finally, we substitute the optimization results of the hybrid BPO-Firefly algorithm into the BRDF model to analyze the reflection characteristics of an aluminum plate and gold foil.

The scope of this paper is to compare different dental sealants and flow materials indicated for sealing pit and fissures considering their chemical formula. The narrative review aims to address the questions: What is the essence of different dental sealants’ activity, how their chemical formula affects their mechanisms of caries prevention and what makes a dental sealant efficient mean of caries prevention. Another vital issue is whether the sealants which contain fluoride, or any other additions have potentially increased antimicrobial properties. Methods: An electronic search of the PubMed, Cochrane, Web of Science and Scopus databases was performed. The following keywords were used: (dental sealants) AND (chemical composition). Additionally, information about composition and indications for clinical use provided by manufacturers were utilized. The review aims are to find crucial elements of sealants’ composition which affect their cariostatic mechanisms.

Self-adaptive systems are capable of reconfiguring themselves while in use to reduce the risks forced by environments for which they may not have been specifically designed. Run-time validation techniques are required because complex Self-adaptive systems must consistently offer acceptable behavior for important services. The run-time testing can offer further confidence that a Self-adaptive system will continue to act as intended even when operating in unknowable circumstances. This article introduces an evolutionary framework that supports adaptive testing for Self-adaptive systems. To ensure that the adaptive systems continue to operate following its requirements and that both test plans and test cases continuously stay relevant to shifting operational conditions. The proposed approach using the SPEA2 algorithm facilitates both the execution and adaptation of run-time testing operations.

Environmental concerns, among other causes, are leading to meat replacement in the diet by healthy, nutritious and tasty foods. Alternative protein sources of plant origin can be an alternative to meat, but their low biological value proteins can be a problem. Novel foods, such as insect meals, can meet currently consumer demands. Therefore, this research has developed innovative prototypes of analogue burgers with animal and vegetable proteins. Concerned about health and allergies, a prototype incorporating soya to satisfy coeliacs was developed. An iterative and heuristic process was carried out to test the product development feasibility. The main raw materials used were insect flour (Tenebrio molitor), seitan and soya. In addition, oat and sodium alginate were used as binders. Shelf-life of the new product was evaluated by physicochemical (pH, aw, moisture, colour, acidity and peroxide index) and sensory analysis (quantitative analysis -QDA-). The production of the burger analogues was feasible. Product characterisation showed significant differences (p < 0.05) among samples for organoleptic properties, highlighting texture changes. Using a multivariate model, it was established “The best before date” at 7 days for all developed prototypes, conditioned by microbial growth. Finally, the spoilage model indicated an important contribution to bacterial growth with a notable modification in the pastiness and hardness of the burger analogues developed.

The notion that ‘Stock-G’ humpback whales off western South America are primarily deep oceanic migrators is poorly supported. We documented 66 land-based sightings from Pucusana, Lima Sur: 18 incidental (2002–2023) and 48 dedicated sightings during the northbound winter migration (June-July 2023), covering respectively 38 and 105 individual whales, despite a mean daily observer effort of only 58.7 min. Estimated distances from shore ranged 20–7,000 m (mean= 2,729 m) at depths 25–99 m, while 50% migrated at < 2,500 m (median) from shore. Several groups skirted the coastline from headland to headland. Of five southbound migrating groups, four included an adult with neonate; no northbound groups enclosed a neonate. Two cases of single juvenile/subadult whales moving multidirectionally and closely associated with large seabird feeding frenzies, were considered foraging also. In 2023, 94% of all northbound nearshore sightings occurred from 14 June-11 July, signalling the maximum threat period for interactions with coastal fisheries off metropolitan Lima. If migration is temporally and spatially predictable, effective mitigating measures should be feasible.

Survivors of sexual and gender-based violence (SGBV) are often hindered in their quest to access quality healthcare. This could complicate the achievement of the laudable SDG Target 3.7. The study used an ethnographic approach to solicit information from health providers, adolescents, and young women (AYW) in 10 communities from Lagos and Ibadan; two major cities in Nigeria. Findings indicated that the structural system of services provided in the health services at the primary healthcare level was limited, which posed a great challenge in AYW’s utilization of services for sexual and gender-based violence (SGBV). Some of the challenges identified by health providers included non-existing counseling services, rehabilitation centers, referral problems, and a lack of training for health providers in handling victims of SGBV. The study provided the context of the health providers’ inadequacy and structural problem of health services in providing comprehensive support services to victims of SGBV like adolescents and young women in the slum setting. This poses a barrier to the utilization of services by the survivors. Necessary inclusive services that will meet the need of the victims of SGBV should be in place at primary healthcare centers close to the people in the community for accessibility.

This study investigates the influence of the porous structure, on the density and the mechanical behaviour of new foam concretes incorporating hemp shives. A total of eight batches of foam concretes were manufactured and tested, made with a protein-based foam agent, containing cement, ground granulated blast furnace slag and Metakaolin as binder and hemp shives as natural aggregate. The effect of several parameters is studied, elaboration method (direct and preformed), amount of pozzolanic additions (0% and 30%) and incorporation of hemp shives (5 and 15 vol%) on the resulting physical properties, microstructure, porous structure and mechanical behaviour of the concretes. Hemp shives incorporation results in increased concrete porosity and air bubble radius, decreased uniformity and mechanical strength, and lower cohesion with the cement matrix compared to standard concretes.

This work aimed to develop an easy-to-use smartphone-based electrochemical biosensor to quickly assess coffee blend's total polyphenol (Phs) content at industrial and individual level. The device is based on a commercial carbon-based screen-printed electrode (SPE) modified with multi-walled carbon nanotubes (CNTs) and gold nanoparticles (GNPs). At the same time, the biotransducer, Laccase from Trametes versicolor, TvLac, was immobilized on the sensor surface by using glutaraldehyde (GA) as cross-linking agent. The platform was electrochemically characterized to ascertain the influence of the SPE surface modification on its performance. The working electrode (WE) surface morphology characterization was obtained by scanning electron microscopy (SEM) and Fourier-transform infrared (FT-IR) imaging. All the measurements were carried out with a micro-potentiostat Sensit Smart by PalmSens connected to a smartphone. The developed biosensor provided a sensitivity of 0.12 μA/μM, a linear response ranging from 5 to 70 μM, and a lower detection limit (LOD) of 2.99 μM. Afterwards, the biosensor was tested for quantifying the total Phs content in coffee blends, evaluating the influence of both the variety and the roasting degree. The smartphone-based electrochemical biosensor performance has been validated though the Folin-Ciocâlteu standard method.

Cells are influenced by several biomechanical aspects of their microenvironment, such as substrate geometry. According to the literature, substrate geometry influences the behavior of muscle cells; in particular, the curvature feature improves cell proliferation. However, the effect of the substrate geometry on the myogenic differentiation process is not clear and needs to be further investigated. Here, we show that the 3D co-printing technique allows the realization of substrates. To test the influence of the co-printing technique on cellular behavior we realized linear polycaprolactone substrates with channels in which a fibrinogen-based hydrogel loaded with C2C12 cells was deposited. Cell viability and differentiation were investigated up to 21 days in culture. The results suggest that this technology significantly improves the differentiation at 14 days. Therefore, we investigate the substrate geometry influence by comparing three different co-printed geometries – linear, circular, and hybrid structures (linear and circular features combined). Based on our results, all structures exhibit optimal cell viability (&gt; 94%) but the linear pattern allows to increase the in-vitro cell differentiation, in particular after 14 days of culture. This study proposes an endorsed approach for creating artificial muscles for future skeletal muscle tissue engineering applications.

All solar thermal systems, due to their thermal nature, can be hybridised or operated with both fossil fuel and solar energy. By enhancing availability and dispatch ability, hybridization has the potential to boost the value of concentrating solar thermal technology. Hybrid photovoltaic thermal systems (PV/T) offer a solution to improve on the limited capacity growth seen with standard solar panels. The analysis focuses on the creation of alternative structural and design so-lutions that may be used to boost lacking efficiency that was previously hampered by limited spectrum absorption of sun light. As a result, the spectrum is separated into two spectrum ranges, one that directly matches the bandgap of PV materials and the other that is absorbed for thermal absorption outputs. Most two channel systems are used to capture or reflect sunlight, with the layer specifically located right above the PV cell. Another layer of nanofluid is employed to evacuate heat from the PV cell, acting as the second channel, to specifically eliminate overheating difficulties. To address concerns that have arisen as a result of years of observation, the most recent study involves nano-particle-based fluids employed in PV/T, which uses a cooling medium to provide an alternate heat transfer option. Aside from nanofluids, there are phase change materials, channel alterations that result in a higher flow rate and hence improve overall performance.

Evidence-based data for endometriosis management are limited. Experiments are excluded without adequate animal models. Data are limited to symptomatic women and occasional observations. Hormonal medical therapy cannot be blinded if recognised by the patient. Randomised controlled trials are not realistic for surgery since a variable disease with low numbers. Each diagnosis and treatment is an experiment with an outcome and experience is Bayesian updating from the past. If the experience of many is similar, this has more value than an opinion. The combined experience of a group of endometriosis surgeons was used to discuss problems in the management of endometriosis. Considering endometriosis as several genetically/epigenetically different diseases is important for medical therapy. Imaging cannot exclude endometriosis and diagnostic accuracy is limited for superficial lesions, deep lesions, and cystic corpora lutea. Surgery should not be avoided for emotional reasons. Shifting infertility treatment to IVF without considering fertility surgery is questionable. The concept of complete excision should be reconsidered. Surgeons should introduce quality control and teaching should move to explain why it is done. The perception of information has a personal bias. These are the major problems in the management of endometriosis identified by the combined experience of endometriosis surgeons.

There is an international concern for reducing energy consumption and protecting the environment in the construction industry. The energy efficiency of a building depends on the thermal resistance of concrete, and utilizing concrete products with elevated thermal resistance can enhance this aspect. This study analyzes the impact of perlite, as an addition, on the physico-mechanical properties of concrete, with the aim of identifying perlite concrete products that will respond to the improvement of the heat transfer resistance of the building envelope. The study examines the effect of replacing different amounts of concrete aggregates with perlite in percentages of 10%, 20%, 30%, and 100%. The results show that substituting sand with perlite improves the thermal performance of concrete, but its mechanical properties are negatively affected. The research carried out highlighted that perlite can be successfully introduced in the production of concrete blocks used for external non-bearing wall panels, the outstanding feature being the reduction of energy consumption in buildings. Overall, the paper identifies an efficient and environmentally friendly way of using perlite in the construction industry, enhancing the energy efficiency of buildings while minimizing the environmental footprint caused by the construction industry.

Animal welfare assessment protocols are important for identifying welfare problems in conservation programs. This study aimed to develop a baseline welfare protocol for the assessment of welfare in huemul (Hippocamelus bisulcus) in conservation centers. This protocol is based on the Welfare Quality® (WQ) framework for cattle, considering the available literature on the behaviours, ecology, conservation plans, captive management of this species, and welfare assessment protocols for other ungulate species. As a result, the protocol was specifically developed for huemuls and included four principles, 12 criteria, and 23 animal- and resource-based indicators. The 12 criteria of the WQ protocol were reduced to nine, and three new criteria were added because they were both feasible and essential for welfare assessment in captive huemuls. This protocol is mainly intended to identify welfare problems in endangered species in the context of conservation centers (reproduction, rescue, rehabilitation, or treatment centers). Thus, aggregation of different measures to obtain a global score has not been proposed. However, a scoring system that assigns a value on a 0-2 scale (0= No welfare concern; 1= welfare concern; 2= urgent welfare concern) is proposed for each category. Although further research is still needed to fully validate the protocol, this is the first development of a completed protocol for huemul welfare assessment.

High-precision ground point cloud data has a wide range of applications in various fields, and the separation of ground points from non-ground points is a crucial preprocessing step. Therefore, designing an efficient, accurate, and stable ground extraction algorithm is of great significance for improving the processing efficiency and analysis accuracy of point cloud data. The study area in this article was a Park in Guilin, Guangxi, China. The point cloud was obtained by utilizing the UAV platform. In order to improve the stability and accuracy of the Filter algorithm, this article proposed a triangular grid filter based on Slope Filter, found violation points by the spatial position relationship within each point in the triangulation network, improved KD-Tree-Based Euclidean Clustering, and applied it to the non-ground points extraction, this method has good accuracy, stability and achieves good results in separating ground points from non-ground points. At first, using Slope Filter to remove some non-ground points, to reduce the error of taking ground points as non-ground points; Secondly, established a triangular grid based on the triangular relationship between each point, the violation-triangle can determin through the grid, and then the corresponding violation points were found in the violation-triangle; Thirdly, according to the three-point collinear method to extract the regular points, used these points to extract the regular landmarks by KD-Tree-Based Euclidean Clustering and Convex Hull Algorithm; Finally, removed disperse points and irregular landmarks by Clustering Algorithm. In order to confirm the superiority of this algorithm, this article compared the filter effects of various algorithms on the study area and filtered the 15 sample data provided by ISPRS, and obtained an average error of 3. 46%. The results showed that the algorithm in this article have a high processing efficiency and accuracy, which can greatly improve the processing efficiency of point cloud data in practical applications.

Nanotechnology and polymer engineering are steering towards a new development to invade deleterious mysteries. In the last few decades, polymer engineering has grabbed researchers’ attention and similarly, polymeric network-engineered structures have been vastly studied. Prior to therapeutic application, early and quick detection analyses are critical. Therefore, developing nanoscale sensors to manage the acute expression of feeble states and malignancies to draw therapeutic lines demands advanced nanoengineering. In spite of nano-therapeutics have emerged as an alternative approach to tackling strenuous diseases. Also, studies have shown highly biocompatible biomedical engineering has emerged with sheer progression. Moreover, hydrogels have emerged as a three-dimensional (3D) polymeric network that consists of hydrophilic natural or synthetic polymers. The resemblance of hydrogels with tissue structure makes it more unique to study inquisitively. Preceding studies have shown a vast spectrum of synthetic and natural polymer deployment in the field of biotechnology and molecular diagnostics. This review explores recent studies on synthetic and natural polymer engineered hydrogel-based biosensors and their applications in multipurpose diagnostics and therapeutics. We reviewed the latest studies on hydrogel-engineered biosensors, exclusively DNA-based and DNA hydrogels fabricated biosensors.

: Consumption of plant-based milk replacers has increased in recent years due to health benefits, benefits attributed mainly to the content of phenolic compounds, fatty acids, or bioactive compounds with antioxidant activity. In this context, we proposed to obtain two types of less studied plant-based beverages, namely lupine and chickpea beverages, as well as the possibility of getting these beverages using germinated seeds and even obtaining probiotic drinks through fermentation with Lactobacillus plantarum 299v. To evaluate the quality of the obtained products, we determined their content of proteins, fatty acids, organic acids, volatile compounds, and phenolic compounds. We evaluated the antioxidant activity of the obtained herbal drinks, and a load of probiotic microorganisms present after the fermentation process. Both lupine and chickpea drinks have the desired properties, high content of fatty acids and phenolic compounds, that bring probiotic benefits.

Polymeric wet-strength agents are important additives used in the paper industry to improve the mechanical properties of paper products, especially when they come in contact with water. These agents play a crucial role in enhancing the durability, strength, and dimensional stability of paper products. The aim of this review is to provide an overview of the different types of wet-strength agents available and their mechanisms of action. We will also discuss the challenges associated with the use of wet-strength agents and the recent advances in the development of more sustainable and environmentally friendly agents. As the demand for more sustainable and durable paper products continues to grow, the use of wet strength agents is expected to increase in the coming years.

3D point cloud classification tasks have been a hot topic in recent years. Most existing point cloud processing frameworks lack context-aware features due to the deficiency of sufficient local feature extraction information. Therefore, we design an augmented sampling and grouping (ASG) module to efficiently obtain fine-grained features from the original point cloud. In particular, this method strengthens the domain near each centroid and makes reasonable use of the local mean and global standard deviation to mine point cloud’s local and global features. In addition to this, inspired by the transformer structure UFO-ViT in 2D vision tasks, we first try to use a linearly-normalized attention mechanism in point cloud processing tasks, investigating a novel transformer-based point cloud classification architecture UFO-Net. An effective local feature learning module is adopted as a bridging technique to connect different feature extraction modules. Importantly, UFO-Net employs multiple stacked blocks to better capture feature representation of the point cloud. Extensive ablation experiments on public datasets show that our method outperforms other state-of-the-art methods. For instance, our network performed with 93.7% overall accuracy on the ModelNet40 dataset, which was 0.5% higher than PCT. Our network also archived 83.8% overall accuracy on the ScanObjectNN dataset, which is 3.8% better than PCT.

A growing number of health conscious consumers are looking for animal protein alternatives with similar texture, appearance, and flavor. There has been a lot of interest in meat analogs as potential meat substitutes. However, research and development still needs to find any alternative non-meat materials. The objective of the current research was to develop fungi minced meat alternative (FMMA) from edible mushrooms. Pleurotus Sajor-caju (SC) was used as the starting material. SC mushroom was selected for starting materials based on high protein content (41.99%.) and sensory attributes. Chickpea flour was used to improve the textural properties by mixing with SC mushroom at a ratio of 0:50, 12.5:37.5, 25:25, 37.5:12.5, and 50:0 (w/w). Textural and sensory attributes suggest that SC mushroom to chickpea at a ratio of 37.5:12.5, shows higher acceptability of FMMA with the protein content up to 47%. Beetroot extract 0.2% (w/w), and 5% (w/w) canola oil showed the most acceptable color parameters and consumer acceptability. This research suggested that SC mushroom with 12.5% chickpea flour, 0.2% beetroot extract and 5% canola oil could be suitable ingredients for the mushroom-based FMMA.

Topological indices are invariant numerical fields of a graph that give facts about the structure of graphs and are found to be very helpful in predicting the physical properties of aluminophosphates. The characteristics of the aluminophosphates are similar to those of zeolites. Two examples of current applications are natural gas dehydration and humidity sensor. New frameworks are being synthesised by researchers in chemistry and materials science. There are many layers and holes in these substances. In this study, Vertex version of distance-based topological indices, the entropy of topological indices and their numerical analysis are explained.