The effects of the climate crisis are affecting ecosystems at different scales and magnitudes. This paper focuses on a massive Mediterranean mussel die-off observed along the middle Italian Adriatic coast in the summer of 2022. We considered the possible environmental causes of this phenomenon and carried out a climatic analysis of the last decade. We performed field surveys in different locations along a 16 Km coastal stretch (from Martinsicuro (TE) on the South, to Grottammare (AP) on the North). The study area includes two marine Sites of Community Importance under the European Natura 2000 network. The mussels die-off has interested practically all the natural mussel-beds colonizing the study area. Mussels are sessile filter-feeding organisms inhabiting the intertidal zone, therefore, are highly exposed to variations in environmental conditions such as temperature and nutrient load. We discuss the possible causes of this die-off, proposing that high temperature and the scarce availability of food acted simultaneously as stress factors, generating local unsustainable living conditions for this species.

We developed and applied a method for characterizing bacterial promoters genome-wide by in vitro transcription coupled to transcriptome sequencing specific for native 5’-ends of transcripts. This method called ROSE (Run-Off transcription/RNA-SEquencing), only requires chromosomal DNA, ribonucleotides, RNA polymerase (RNAP) core enzyme, and a specific sigma factor, recognizing the corresponding promoters, which have to be analyzed. ROSE was performed on E. coli K-12 MG1655 genomic DNA using E. coli RNAP holoenzyme (including σ70) and yielded 3,226 transcription start sites, 2,167 of which were also identified in in vivo studies, and 598 were new. Many new promoters not yet identified by in vivo experiments might be repressed under the tested conditions. Complementary in vivo experiments with E. coli K-12 strain BW25113 and isogenic transcription factor gene knockout mutants of fis, fur, and hns were used to test this hypothesis. Comparative transcriptome analysis demonstrated that ROSE could identify bona fide promoters that were apparently repressed in vivo. In this sense, ROSE is well-suited as a bottom-up approach for characterizing transcriptional networks in bacteria and ideally complementary to top-down in vivo transcriptome studies.

Our knowledge of physics and chemistry is relatively well defined. Results from that knowledge are predictable as, largely, are those of their technical offspring such as electrical, chemical, me-chanical and civil engineering. By contrast biology is relatively unconstrained and unpredictable. A factor common to all areas is the trade-off, which provides a means of defining and quantifying a problem and, ideally, its solution. In order to understand the anatomy of the trade-off and how to handle it, its development (as the dialectic) is tracked from Hegel and Marx to its implementa-tion as dialectical materialism in Russian philosophy and TRIZ, the Theory of Invention. With the ready availability of mathematical techniques, such as multi-objective analysis and the Pareto set, the trade-off is well-adapted to bridging the gaps between the quantified and the unquantifiable, allowing modelling and the transfer of concepts by analogy. It is thus an ideal tool for biomimet-ics. An intracranial endoscope can be derived with little change from the egg-laying tube of a wood wasp. More complex transfers become available as the technique is developed. Most im-portant, as more trade-offs are analyzed, their results are stored to be used again in the solution of problems. There is no other system in biomimetics which can do this.

Eddy current testing can be used to interrogate steels but it is hampered by the lift-off distance of the sensor. Previously, the lift-off point of intersection (LOI) feature has been found for the pulsed eddy current (PEC) testing. In this paper, a lift-off invariant inductance (LII) feature is proposed for the multi-frequency eddy current (MEC) testing, which merely targets the ferromagnetic steels. That is, at a certain working frequency, the measured inductance signal is found nearly immune to the lift-off distance of the sensor. Such working frequency and inductance are termed as the lift-off invariant frequency (LIF) and LII. Through simulations and experimental measurements of different steels under the multi-frequency manner, the LII has been verified to be merely related to the sensor parameters and independent of different steels. By referring to the LIF of the test piece and using an iterative inverse solver, one of the steel properties (either the electrical conductivity or magnetic permeability) can be reconstructed with a high accuracy.

In many advanced industrial applications, the thickness is a critical index, especially for metallic coatings. However, the variance of lift-off spacing between sensors and test pieces affects the measured voltage or impedance, which leads to unreliable results from the sensor. Massive research works have been proposed to address the lift-off issue, but few of them applies to the thickness measurement of planar metallic films with finite-size circular (disk) geometry. Previously, a peak-frequency feature from the swept-frequency inductance was used to compensate the measurement error caused by lift-offs, which was based on the slow-changing rate of impedance phase term in the Dodd-Deeds formulas. However, the phase of measured impedance is nearly invariant merely on a limited range of sample thicknesses and working frequencies. Besides, the frequency sweeping is time-consuming, where a recalibration is needed for different sensor setups applied to the online real-time measurement. In this paper, a single-frequency algorithm has been proposed, which is embedded in the measurement instrument for the online real-time retrieval of thickness. Owing to the single-frequency measurement strategy, the proposed method does not need to recalibrate for different sensor setups. The thickness retrieval is based on a triple-coil sensor (with one transmitter and two receivers). The thickness of metallic disk foils is retrieved from the measured electrical resistance of two transmitter-receiver sensing pairs. Experiments on materials of different electrical conductivities (from direct current), thicknesses and planar sizes (radii) have been carried out to verify the proposed method. The error for the thickness retrieval of conductive disk foils is controlled within 5 % for lift-offs up to 5 mm.

For the electromagnetic eddy current testing, various methods have been proposed for reducing the lift-off error on the measurement of samples. In this paper, instead of eliminating the measurement error caused by the lift-off effect, an algorithm has been proposed to directly measure the lift-off distance between the sensor and non-magnetic conductive plates. The algorithm is based on a sample-independent inductance (SII) feature. That is, under high working frequencies, the inductance is found sensitive to the lift-off distance and independent of the test piece under an optimal single high working frequency (43.87 kHz). Furthermore, the predicted lift-off distance is used for the thickness prediction of the non-magnetic conductive samples using an iterative method. Considering the eddy current skin depth, the thickness prediction is operated under a single lower frequency (0.20 kHz). As the inductance has different sensitivities to the lift-off and thickness, the prediction error of the sample thickness is different from that of the lift-off distance. From the experiments on three different nonmagnetic samples – aluminium, copper, and brass, the maximum prediction error of the lift-off distance and sample thickness is 1.1 mm and 5.42 % respectively at the lift-off of 12.0 mm.

Previously, various techniques have been proposed for reducing the lift-off effect on the thickness measurement of the non-magnetic films, including the peak-frequency feature and phase feature in the Dodd-Deed analytical formulation. To realise a real-time feedback response on the thickness monitoring, the phase term in the Dodd-Deeds formulation must be taken off the integration. Previous methods were based on the slow change rate of the phase term when compared to the rest of the term – the magnitude term. However, the change rate of the phase term is still considerable for a range of working frequencies. In this paper, a high-frequency feature has been found. That is, the ratio between the imaginary and real part of the phase term is proportional to the integral variable under high frequencies. Based on this proportion relationship, the phase term has been taken out; and a thickness algorithm has been proposed. By combing the measured impedance from the custom-built sensor (three coils), the thickness of the metallic film can be reconstructed. Experiments have been carried out for the verification of the proposed scenario. Results show that the thickness of the metal film can be reconstructed with a small error of less than 2 %, and immune to a reasonable range of lift-offs.

Aluminum wire is a common material for wire bonding due to its resistance to oxidation and low price. It does not melt when becoming a free air ball (FAB) during the electronic flame-off (EFO) process with wettability, and is applied by wedge bonding. This study used 20μm Zn-Coated Al-0.5wt.%Si (ZAS) wires to improve the FAB shape after the EFO process, while maintaining stability of the mechanical properties, including the interface bonding strength and hardness. In order to test circuit stability after ball bonding, the current-tensile test was performed. During the experiment, it was found that 80nm ZAS with wire bonding has lower resistance and higher fusing current. For the bias tensile test, the thicker Zn film diffused into the Al-Si matrix easily, after which the strength was reduced. The ball-bond interfaces had no change in their condition before and after the bias. Accordingly, ZAS could be a promising candidate for ball bonding in the future.

It is claimed that classical mechanics (CM) in terms of its equivalent Koopman-von Neumann formulation (KvN) is indeed a ’real’ quantum theory since the formalism of quantum mechanics (FQM) does not, nor need it, exclude it as a such. This claim is made manifest by suggesting a common structure of which both KvN and ordinary quantum mechanics (OQM) correspond to unitary representations of, although unitarily inequivalent such. It is shown that OQM is obtained by enforcing the extra physical condition of quantized energy levels, which by itself does not constitute the ’quantum mystery’. It is furthermore shown that KvN in a physically realizable sense contain the hallmark quantum behavior of quantum interference. It is hence concluded that both CM and OQM are subjected to the same foundational issues. As the central part of both KvN and OQM is the introduction of probabilities via FQM it is suggested that the foundational issues regarding FQM are less about FQM itself and more about the concept of probability.

The article discusses determinants of living environment in Central and Eastern Europe. As an example, the city of Radzionkow was chosen, with 16 thousand inhabitants, located in the Silesia agglomeration in southern Poland, in the area where hard coal has been mined for almost two hundred years, which largely serves as a source of heating for houses and flats. 360 buildings in 6 groups of 60 buildings were examined in the selected city, which allowed to distinguish 3 different areas in terms of the quality of the living environment depending on the technical condition of buildings, the method of heating and location. To a large extent, determinants are the existing spatial and geophysical conditions of a given location. Many research and reports on the living environment do not take into account the factors mentioned, focusing only on the statistical data of pollution, excluding spatial factors. In the research presented, the author, taking into account location variables, shows differences in the measurements of air pollution in relation to the designated location zones depending on the morphological structure of the building, the degree of its modernization and the types of heating used in buildings.

One of the possible mechanisms causing significant emissions of methane into the atmosphere within the Arctic shelf may be the decomposition of gas hydrates. Their accumulations within the Arctic shelf formed during Ice Age almost simultaneously with the formation of permafrost, which contributed to the emergence of a zone of stable existence of gas hydrates. The subsequent flooding of the Arctic shelf led to the degradation of the permafrost and the violation of the conditions for the existence of hydrates. To assess the state of the stability zone, methods of mathematical numerical modeling are used. Standard seismic methods are widely used to localize gas hydrates, but monitoring their physical state requires the development of fundamentally new approaches based on solving multiparameter inverse seismic problems. In particular, the degree of attenuation of seismic energy is one of the objective parameters for assessing the consolidation of gas hydrates: the closer they are to the beginning of decomposition, the higher the attenuation, and hence the lower the quality factor. Thus, the methods of seismic monitoring of the state of gas hydrates in order to predict the possibility of developing dangerous scenarios should be based on solving a multi-parameter inverse seismic problem. This publication is devoted to the presentation of this approach.

In China's mountainous coastal terrain, the storm badly damaged low-rise buildings. At present, it is not clear how the relative position of buildings and mountains affects the surface of a low-rise building’s fluctuating coefficient. The study compared these results with the wind pressure distribution without the surrounding environment. The primary objective of this study is to examine the fluctuating coefficient variation rule based on the spacing between hillsides and buildings under 0° wind angle. Additionally, the study analyzes the fluctuating wind pressure coefficient across wind angles between 0°~90°. The distribution of wind pressure in different common hillside landforms was examined through a wind tunnel experiment, which also compared with the distribution in an open environment. The study examined the fluctuating coefficient as the distance between the building and the hillside changed, specifically for wind blowing at a 0° angle. Next, an analysis is conducted on the changing pattern of the fluctuating coefficient for low-rise buildings ranging from a wind angle of 0° to 90°. Simultaneously, the investigation examined the power spectrum and wind pressure’s probability distribution, while considering the proximity of the building to an adjacent hill. The findings indicated that the changing wind pressure factor on the surface of the structure differed based on the relative location of the hillside and the building. The roof's wind pressure coefficient fluctuated and gradually increased until it reached its peak, unaffected by the surroundings. The low-frequency energy decreased in windward eaves, while the high-frequency energy progressively rose as the distance between the hillside and the building increased. The wind pressure on the leeward side exhibited Gaussian characteristics in its probability distribution.

Based on the two-flavors Polyakov quark-meson model, we study the bubble dynamics of a first-order phase transition in chiral phase diagram at high density but low temperature in the framework of the homogeneous thermal nucleation theory. Under the mean-field approximation, after obtaining the effective potential with inclusion of the fermionic vacuum term, we build a geometric approach to probe two possibly existing minima, which can actually tunnel through a bounce interpolated between a metastable vacuum to an adjacent true vacuum. By separating our discussions into a weak first-order hadron quark phase transition and strong ones, the bubble profiles, the surface tension, the typical radius of the bounce and the saddle point action in the presence of a nucleation bubble as a function of temperature are numerically calculated in detail as the chemical potentials are fixed at $\mu=306 \mathrm{MeV}$ and $\mu=310 \mathrm{MeV}$. our results show that the surface tension remains a small value even when the density is very high and phase boundaries for hadron and quark matter should be resized properly according to the saddle point action evaluated on the bounce. It is also noticed that the inclusion of the deconfinement phase transition in term of the Polyakov loop does not change chiral phase transition dramatically for light quarks.

In this paper, we propose a method to find all efficient solutions of an interval multiple objective linear programming (IMOLP) problem with interval coefficients in the objective functions, the constraint matrix and the right-hand side vector. The set of all efficient solutions of an IMOLP problem can completely supply information to the decision makers in finding their most preferred solutions but, up to now, not all efficient solutions of an IMOLP problem can be found by known methods. A numerical example is given to illustrate the working of the proposed method.

This article is a study on the (k,s)-Riemann-Liouville fractional integral, a generalization of the Riemann-Liouville fractional integral. Firstly, we introduce several properties of the extended integral of continuous functions. Furthermore, we make the estimation of the Box dimension of the graph of continuous functions after the extended integral. It presents that the upper Box dimension of the (k,s)-Riemann-Liouville fractional integral for any continuous functions is no more than the upper Box dimension of the functions on the unit interval I=[0,1], which indicates that the upper Box dimension of the integrand f(x) will not be increased by the σ-order (k,s)-Riemann-Liouville fractional integral ksD−σf(x) where σ>0 on I. Additionally, we prove that the fractal dimension of ksD−σf(x) of one-dimensional continuous functions f(x) is still one.

In this study, we discuss the properties of absolute void space or the universe at zero seconds, and how these properties play a vital role in creating a mechanism in which the very first particle gets created and we find the limit in which when the absolute void volume reaches will lead to the collapse that leads to the creation of the first particle. Later we discuss the standard model explanation through the elementary dimensions theory, as according to the elementary dimensions theory study that was peer-reviewed at the end of 2020, everything in the universe is made from four elementary dimensions, these dimensions are the three spatial dimensions (X, Y, and Z) and the force equivalent.

This theoretical article provides a brief description of the model of living systems' functioning by defining them as resource flows patterns. It reviews the living systems growth limitation between their development cycles by the Fibonacci sequence. Besides, there are presented systems resource base criteria, necessary for accumulating the resources and their investment. The article also considers the conditions for the formation of various systems strategies. Then we reviewed the principles of elemental analysis of information by a person as a living system according to the considered model. The study also shows the possibility of forming priorities in analyzing information for 16 combinations as maximum. At that, it remains crucial to divide a human's information analysis between the two hemispheres of the brain. The described combinations of priorities in a person's information analysis are compared with the existing differential personality models, such as the big five personality traits, the Myers-Briggs type indicator, temperaments model and Honey and Mumford Learning styles.

It is agreed that before the creation of particles, space was absolutely devoid of matter and radiation. In this study, we assume that the absolute void comprises four dimensions; three spatial dimensions and a force equivalent representing the factor of change among the elementary dimensions. Our hypothesis is based on the expansion of the spatial dimensions, and the subsequent space instability. We demonstrated that when the outward force equivalent strength exceeds a critical limit, it collapses inward to restore equilibrium in the system. Then, the void inside the collapsed force equivalent acts as a void in a confined system, the energy of the system remains conserved at all stages. With the decrease of the spatial dimensions due to the collapse the energy density increases, at the final stage the energy in the confined system is concentrated forming a solid state of energy. In which, this solid state of energy is a particle become the source of the elementary particles. The created high-energy sources are controlled by the internal and external forces of the source and all entities in its external force field until equilibrium is reached. The article gives the summary of Big bang theory and its problems which are further discussed in inflation. This article will help in understanding that how elementary dimensions play a role in the formation of elementary particles. The quark gluon plasma, inflation, gravitational collapse, and gravitational lensing provide evidence supporting the elementary dimensions theory presented in this paper.

The economic development of the Yangtze River Delta region is in a stage of rapid growth. As a unique intersection of urban and rural functions, contradictions are prominent. The production, life, and ecological functions of suburban rural landscapes are forming a new trade-off and synergistic relationship. The planning policy of the Yangtze River Delta from 2021 to 2035 aims to achieve the coordinated development of ecology, economy, and people's lives in the suburban areas of the Yangtze River Delta. To evaluate the current status of the “production-living-ecological” functions of suburban rural areas in the Yangtze River Delta region and provide data support for future planning decisions in the Yangtze River Delta region, this study selected the suburban rural landscape of Jiashan as the research object and used temporal rank correlation analysis and spatial bivariate autocorrelation analysis to explore the evolution characteristics of the suburban rural landscape of Jiashan from 2000 to 2020. The results show that (1) the linear increase of the production function and life function of Jiashan rural areas has led to a decline in ecological functions, especially a decline in life functions. (2) There is a trade-off and synergistic relationship between the different functions of the suburban rural landscape of Jiashan, showing a temporal change pattern dominated by trade-offs. (3) The multifunctional trade-off and synergistic relationship of the suburban rural landscape in Jiashan County exhibited obvious spatial pattern variability, which was manifested as the evolution from street-centered areas to compatibility-trade-trade-off and from town-centered areas to compatibility-synergy-trade-off. The relevant policies for the construction of ecological green comprehensive demonstration areas affect the economic, social, and ecological development of the Yangtze River Delta region, resulting in substantial differences in the types and trends of the spatiotemporal evolution of the functional trade-off and synergistic relationship of suburban rural landscape. Targeted measures should be taken according to local conditions to guide the coordinated development of landscape functions.

Photonic circuits find applications in biomedicine, manufacturing, quantum computing and communications. Photonic waveguides are crucial components, typically having cross-sections orders of magnitude inferior compared with other photonic components (e. g. optical fibers, light sources and photodetectors). Several light coupling methods exist, consisting of either on-plane (e. g. adiabatic and end-fire coupling) or off-plane methods (e. g. grating and vertical couplers). The grating coupler is a versatile light transference technique which can be tested at wafer level, not requiring specific fiber terminations or additional optical components, like lenses, polarizers or prisms. This study focuses on fully-etched grating couplers without bottom reflector, made from hydrogenated amorphous silicon (a-Si:H), deposited over a silica substrate. Different coupler designs were tested, of these we highlight two: superimposition of two lithographic masks with different periods and an offset between them to create a random distribution and a technique based on the quadratic refractive index variation along the device’s length. Results were obtained by 2D-FDTD simulation. The designed grating couplers achieve coupling efficiencies for the TE-like mode over -8 dB (mask overlap) and -3 dB (quadratic variation), at a wavelength of 1550 nm. The coupling scheme considers a 220 nm a-Si:H waveguide and an SMF-28 optical fiber.

In the field of railroad safety, effective detection of surface cracks is critical, necessitating reliable, high-speed non-destructive testing (NDT) methods. This study introduces a hybrid Eddy Current Testing (ECT) probe, specifically engineered for railroad inspection, to address the common issue of ’lift-off noise’ due to varying distances between the probe and test material. Unlike traditional ECT methods, this probe integrates transmit and differential receiver coils, aiming to enhance detection sensitivity and minimize lift-off impact. The study optimizes ECT probes employing different driver coils, emphasizing three main objectives: a) quantitatively evaluating each probe using signal- to-noise ratio (SNR) and outlining a real-time data processing algorithm based on SNR methodology; b) exploring the frequency range proximal to the electrical resonance of the receiver coil; c) examining sensitivity variations across varying lift-off distances. The experimental outcomes indicate that the newly designed probe with figure 8-shape driver coil significantly improves sensitivity in detecting surface cracks on railroads. It achieves an impressive SNR exceeding 100 for defects with minimal dimensions of 1 mm in width and depth. Simulation results closely align with experimental findings, validating the investigation of optimal operational frequency and lift-off distance for selected probe performance, determined to be 0.3 MHz and 0.5 mm, respectively. The realization of this project would lead to notable advancements in enhancing railroad safety by improving crack detection efficiency.

The presence of escaped fish in aquaculture facilities as a result of harsh meteorological conditions (more pressing in a face of climate change) requires a better understanding of these dynamical behaviour through vigilant monitoring and validated numerical models. In this context, data from strain, stress sensors as well as meteorological and current sensors installed at an aquaculture farm in the Region of Murcia (Spain) were collected, processed and analysed. Among them, first results about the relationship between load and currents sensors are presented. Due to the complexity of the time series, various analyses were conducted to examine their interrelation, encompassing regression analysis of raw data and data segmented into different time intervals. Through this analysis, it was observed that employing distinct time windows better elucidated the data variability. Furthermore, an optimal data window of 240 data was identified, demonstrating significantly improved explanatory power, with the coefficient of determination (R2) increasing by approximately 0.8 depending on the section. This pave the way for optimizing the monitoring features that must be carried out to relate cause-and-effect variables in the behaviour of these off-shore infrastructures.

This article discusses the use of a hand held electronic nose to obtain information on the presence of some aromatic defects in natural cork stoppers, such as haloanisoles, alkylmethoxypyrazines and ketones. The proposed prototype has been developed as an instrumentation system with up to eight commercial gas sensors. Machine learning algorithms such as k-nearest neighbors and artificial neural networks has been used. The use of this system tries to improve the current aromatic defect detection process in the cork stopper industry, which is done by gas chromatography or human test panels.

This paper proposes a linear eddy-current feature to determine the radius of a metallic ball in a non-contact manner. An electromagnetic eddy-current sensor with two coils is placed co-axially to the metal ball during measurement. It is well known that the distance between the sensor and test piece (i.e. lift-off) affects eddy-current signals. In this paper, it is found that the peak frequency feature of inductance spectrum is linear to the lift-off spacing between the centre of coil and ball. Besides, the slope of peak frequencies versus lift-offs is linked to the radius of ball. The radius of metallic balls is retrieved from the experimental and embedded analytical result of the slope. Measurements have been carried out on 6 metallic balls with different radii. The radius of the metallic ball can be retrieved with an error of less than 2 %.

Understanding biological mechanisms that regulate emergence of viral diseases, in particular those events engaging cross-species pathogens spillover, are becoming increasingly important in Virology. Species barrier jumping has been extensively studied in animal viruses, and the critical role of a suitable intermediate host in animal viruses-generated human pandemics is highly topical. However, studies on host jumping involving plant viruses have been focused on shifting intra-species, leaving aside the putative role of “bridge hosts” in facilitating interspecies crossing. Here, we take advantage of several VPg mutants, derived from a chimeric construct of the potyvirus Plum pox virus (PPV), analysing its differential behaviour in three herbaceous species. Our results showed that two VPg mutations in a Nicotiana clevelandii-adapted virus, emerged during adaptation to the bridge-host Arabidopsis thaliana, drastically prompted partial adaptation to Chenopodium foetidum. Although, both changes are expected to facilitate productive interactions with eIF(iso)4E, polymorphims detected in PPV VPg and the three eIF(iso)4E studied, extrapolated to a recent VPg:eIF4E structural model, suggested that two adaptation ways can be operating. Remarkably, we found that VPg mutations driving host-range expansion in two non-related species, not only are not associated with cost trade-off constraints in the original host, but also improve fitness on it.

Mid-tropospheric cut-off low (COL) pressure systems are linked to severe weather, heavy rainfall and extreme cold conditions over South Africa. They often result in floods and snowfalls in winter disrupting economic activities. This paper examines the evolution and circulation patterns associated with severe COLs over South Africa. We evaluate the performance of the 4.4 km Unified Model (UM) which is currently used operationally by the South African Weather Service to simulate daily rainfall. Circulation variables and precipitation simulated by the UM were compared against ECMWF’s ERA Interim reanalyses and GPM precipitation at 24-hour timesteps. We present five recent (2016-2019) severe COLs that had high impact and found higher model skill when simulating heavy precipitation during the initial stages than the dissipating stages of the systems. A key finding was that the UM underestimated precipitation mainly due to inaccurate placing of COL centers and areas of heavy rainfall by up to 5° of latitude away from the actual location, due to the poor formulating of cumulus and microphysics schemes in the model. Understanding the performance and limitations of the UM model in simulating COL characteristics can benefit severe weather forecasting and contribute to disaster risk reduction in South Africa.

This work proposes a novel methodology for the complete characterization of fiber reinforced concrete (FRC). The method includes bending tests of prismatic notched specimens, based on the Standards for FRC, tensile and pure shear tests. The values adopted by the standards for designing FRC are the obtained from bending tests, typically fR3, even for shear and pure tension loading. This paper shows that the remaining strength of FRC, supplied by the fibers, depends on the type of loading. In the case of shear and tensile loading the prescriptions of the standards may be unsafe. In this work, the remaining halves of specimens subjected to bending test are prepared and used for shear and tension tests. This means significant savings in specimen preparation and a greater amount of information for structural use of FRC. The results provide relevant information for the design of structural elements of FRC compared with the only use of data supplied by bending tests. In addition, a video-extensometry system was used to analyze the crack generation and cracking patterns. The video-extensometry applied to shear tests allowed the assessment of the sliding values and crack opening values at the crack discontinuity. These values may be quite relevant for the study of the FRC behavior when subjected to shear according to the shear-friction model theories.

There have been several cases of large-scale wind generators (WGs) tripping off caused by untimely fault removing in recent years. Currently, the discoordination between the box-type transformer fuse protection (BTFP) and two-section collecting line current protection (CLCP) brings a security risk to wind farm. In order to ensure the selectivity, the first section (Sec-I) CLCP should be set a enough interval that is longer than the fuse melting time, and another interval is set for the Sec-II CLCP, which weakens the speed of the CLCP. When a fault occurs on the collecting line, there is no doubt that WGs cannot work too long in abnormal operation, which may cause WGs to be placed off the grid. For a power system with high penetration of wind power, large-scale WGs tripping off will cause a great power shortage, and affect the stability of the power system. The selectivity and sensitivity of the CLCP is analyzed in detail to make the CLCP speed better. Considering the fault ride-through ability of WGs, the fault clear time is an important factor to lead to large-scale WGs tripping off. Two main works are done in this paper. The first is to accelerate the speed of the Sec-I CLCP though reducing the protection zone. Another one is introduce the risk assessment module into the CLCP, which not only improve the speed of the CLCP but also ensure the safety of the wind farm during faults. According to the deference in trip-off causes of WGs, the matching functions are created to assess the trip-off risk of WGs on the spot. In the case of fault, the trip-off risk indicators of WGs are timely updated to data sharing center and open to the CLCPs. The set of risk indicators is divided into several subsets according to the risk range. The dynamic changes of the subsets during fault help to improved CLCP scheme. This scheme can accelerate protection speed based on the increasing risk of large-scale WGs tripping off in wind farms. Compared with traditional CLCP, this approach can make the CLCP combines selectivity and speed better based on the analysis of the ride- through ability of WGs.

Abstract: The promotion of sustainable packaging is part of the European Green Deal and plays a key role in the EU’s social and political strategy. One option is the use of renewable resources and biomass waste as raw materials for polymer production. Lignocellulose biomass from annual and perennial industrial crops and agricultural residues are a major source of polysaccharides, proteins, and lignin, and can also be used to obtain plant-based extracts and essential oils. Therefore, these biomasses are considered as potential substitute for fossil-based resources. Here, the status quo of bio-based polymers is discussed and evaluated in terms of properties related to packaging applications such as gas and water vapor permeability as well as mechanical properties. So far, their practical use is still restricted due to lower performance in fundamental packaging functions that directly influence food quality and safety, the length of shelf life and thus the amount of food waste. Besides bio-based polymers, this review focuses on plant extracts as active packaging agents. Incorporating extracts of herbs, flowers, trees, and their fruits is inevitable to achieve desired material properties that are capable to prolong the food shelf life. Finally, the adoption potential of packaging based on polymers from renewable resources is discussed from a bioeconomy perspective.

The Environmental interactions contributed to the processes of settlement and development of the first settlers at southern Peru 15,000 BC. The determination of this process is based on paleoclimatic studies at southern Peru and ethnoarchaeological evidence. The determination of this process is based on paleoclimatic studies of southern Peru and ethnoarchaeological evidence; establishing as a result of this analysis the hypothesis of environmental interaction and territorial occupation of the first hunter-gatherer populations until their consolidation, dominating the geographical space from Tacna. The Disruptive disaster events and their effects on climate during the Peruvian Paleolithic resulted in the origin of local societies that shaped the Tiawanaku societies of the early horizon at Southern Peru and Northern Chile.

The food system, the most important driver of planetary transformation, is in a deep crisis. Therefore, seeking a sustainable and socially-fair transition pathway becomes an issue of utmost priority for our own survival. The consideration of food as a commodity, a social construct that played a central role in driving this crisis, remains the uncontested narrative to lead the different transition pathways what seems rather contradictory. By exploring the normative values in the transition landscape, this paper seeks to understand how relevant is the hegemonic narrative of “food as commodity” and its alternative of “food as commons” to determine transition trajectories and food policy beliefs. Applying the Multi-level Perspective framework and developing the ill-studied “agency in transition”, this research enquired food-related professionals that belong to an online community of practice (N=95) on valuation of food dimensions and agency in food transitions to check whether the valuation of food is relevant to explain personal stances in transition. Results suggest the socially-constructed view of food as commodity is positively correlated to the gradual reforming attitude, whereas food as commons is positively correlated to the counter-hegemonic transformers regardless the self-defined position in the transition landscape (regime or niches). At personal level, there are multiple loci of resistance with counter-hegemonic attitudes in varied institutions of the regime and the innovative niches, many of them holding this discourse of food as commons. Conversely, alter-hegemonic attitudes are not positively correlated to this alternative discourse and they may inadvertently or purportedly reinforce the ‘‘neoliberal narrative’’. Food as commons, a different narrative whose rationale is explained in the paper, seems to be a relevant framework that could enrich the multiple transformative constituencies that challenge the industrial food system and therefore facilitate the convergence of movements that reject the commodification of food.

During the construction of buildings, dangerous chemicals such as benzene, formaldehyde and others are used, which accumulate during the operation of the building. High concentrations of these substances can harm human health. In this article, we have analyzed the possible impact of modular green wall systems on improving of the air. During the research, four different modular green wall systems and various plant species were considered. The result showed that a modular green wall system can improve the air quality by removing harmful pollutants from the air in the buildings. Urban design used to be turned greener and more sustainable using the modern technologies of modular green wall systems. This study focuses on the air-cleaning benefits provided by modular green wall systems and their assessment. This research contributes to fill existing literature gaps on the green wall systems on the buildings and biophilic architecture.

The motivation for investigating the issues presented in this article stemmed from a need to understand better the relationship in long-established physics formulas and extract the information they provided using conventional methods. Based on the definition of magnetic flux quantization, which is based on a combination of fundamental physical constants, the Planck constant, and the particle’s elementary charge, this work explores the results that arise when this equation is combined with the equation of the Bohr-level electrostatic force acting on the electron, which leads to a new mathematical relationship between the combined expressions. The new relationship yields novel theoretical findings related to the known universal constants. Following this insight, the formalism developed in this paper indicates that the mass of the electron and other subatomic particles is associated with the magnitude of the square of the magnetic flux quantum, which makes up the particle. This conclusion is not as strange as it may seem, as the square of the magnetic flux quantum appears in the context of magnetic energy in a current loop and, according to Einstein’s special theory of relativity, energy is equivalent to mass. Another aspect described at the end of this paper demonstrates the connection between the square of the magnetic flux quantum through the Bohr radius and the significance of the wave function in the atom. The theoretical results are in full accordance with experimental results published by NIST CODATA 2018 that I’ve used, which validates the existence of the relationship.

The paper presents the methods of assessing the technical condition of varistor surge arresters used in laboratory tests and in operation - performed without disconnecting the arresters from the network. The analysis of diagnostic methods was supplemented with the results of measurements of the leakage current of arresters coming directly from production and used in the power industry. Among the available methods of evaluating the technical condition of arresters, mainly indicator solutions (temperature, operation counter) and using the measurement of selected parameters of the leakage current are used. In the latter, the method of determining the resistive component of the leakage current, determined on the basis of the analysis of voltage and current waveforms, or only the arrester current, has become widespread. In this type of measurements, current clamps are used in operation, and additionally in voltage measurements from voltage transformers, where you have to take into account the fundamental, additional sources of errors discussed in the article. These errors and dispersion resulting from the production technology may fundamentally hinder the proper assessment of the technical condition, hence it is so important to properly recognize the listed basic sources of measurement uncertainty. In addition, the analysis should take into account three factors related to external conditions - temperature, voltage applied to the arrester and the content of higher harmonics in the supply voltage for which appropriate methods have been provided to determine the active component of the leakage current for reference conditions.

The nonlocal boundary value problem, dtρu(t)+Au(t)=f(t) (0<ρ<1, 0<t≤T), u(ξ)=αu(0)+φ (α is a constant and 0<ξ≤T), in an arbitrary separable Hilbert space H with the strongly positive selfadjoint operator A, is considered. The operator dt on the left hand side of the equation expresses either the Caputo derivative or the Riemann-Liouville derivative; naturally, in the case of the Riemann - Liouville derivatives, the nonlocal boundary condition should be slightly changed. Existence and uniqueness theorems for solutions of the problems under consideration are proved. The influence of the constant α on the existence of a solution to problems is investigated. Inequalities of coercivity type are obtained and it is shown that these inequalities differ depending on the considered type of fractional derivatives. The inverse problems of determining the right-hand side of the equation and the function φ in the boundary conditions are investigated.

Applying a procedure similar to that of E.S. Bring, by using a 4^th degree Tschirnhaus transformation, it was possible to transform the Bring-Jerrard normal quintic (BJQ) equation into a De Moivre form (DMQ), so that it could be solved by radicals. The general solution by radicals of the De Moivre equations of any degree is presented. By the same procedure the BJSx (normal sextic) equation was taken to another one without the 2^nd, 4^th and 6^th terms which was transformed into a cubic (solvable) equation. By applying a 6^th degree Tschirnhaus transformation to the BJSp (normal septic) equation its binormal (without the 2^nd, 3^rd, 4^th and 5^th terms) form was obtained.

Applying a procedure similar to that of E.S. Bring, by using a 4^th degree Tschirnhaus transformation, it was possible to transform the Bring-Jerrard normal quintic (BJQ) equation into a De Moivre form (DMQ), so that it could be solved by radicals. The general solution by radicals of the De Moivre equations of any degree is presented. By the same procedure the BJSx (normal sextic) equation was taken to another one without the 2^nd, 4^th and 6^th terms which was transformed into a cubic (solvable) equation. By applying a 6^th degree Tschirnhaus transformation to the BJSp (normal septic) equation its binormal (without the 2^nd, 3^rd, 4^th and 5^th terms) form was obtained.

Applying a procedure similar to that of E.S. Bring, by using a 4^th degree Tschirnhaus transformation, it was possible to transform the Bring-Jerrard normal quintic (BJQ) equation into a De Moivre form (DMQ), so that it could be solved by radicals. The general solution by radicals of the De Moivre equations of any degree is presented. By the same procedure the BJSx (normal sextic) equation was taken to another one without the 2^nd, 4^th and 6^th terms which was transformed into a cubic (solvable) equation. By applying a 6^th degree Tschirnhaus transformation to the BJSp (normal septic) equation its binormal (without the 2^nd, 3^rd, 4^th and 5^th terms) form was obtained.

Applying a procedure similar to that of E.S. Bring, by using a 4^th degree Tschirnhaus transformation, it was possible to transform the Bring-Jerrard normal quintic (BJQ) equation into a De Moivre form (DMQ), so that it could be solved by radicals. The general solution by radicals of the De Moivre equations of any degree is presented. By the same procedure the BJSx (normal sextic) equation was taken to another one without the 2^nd, 4^th and 6^th terms which was transformed into a cubic (solvable) equation. By applying a 6^th degree Tschirnhaus transformation to the BJSp (normal septic) equation its Bring-Jerrard binormal (without the 2^nd, 3^rd, 4^th and 5^th terms) form was obtained.

Food waste disposal to landfills practice contributes to greenhouse problem due to the emission of gases such as methane to the atmosphere. Shelf-life extension of food products and further valorization of food wastes such as the conversion to activated carbon are tested nowadays as alternative techniques. The development and use of biobased active coatings against food oxidation/bacterial deterioration is an environmentally friendly technique. In this study, a novel food active coating was successfully developed based on a chitosan (CS)/poly-vinyl alcohol (PVOH) matrix activated with a nanohybrid of natural thymol (TO) adsorbed in activated carbon (AC) derived from spent coffee. The results shown that, compared to the pure CS/PVOH polymeric matrix, the coating with 15% wt. TO@AC nanohybrid concentration achieved +23.5 % Young’s modulus value, +20.1% ultimate strength value, increased barrier of +50.2% for water and +74.0 % for oxygen, +69.0% antioxidant activity, increased antibacterial activity of +5.5% against Escherichia coli, +17.8% against Salmonella enterica, +42.5% against Staphylococcus aureus, and +2.5% against Listeria monocytogenes. A visual evaluation of this coating shown a delay to fresh bananas enzymatic browning and significantly decrease their weight loss. This indicates that it could be potentially used to extend the shelf-life of fresh fruits.

When we are asleep we lose the ability to promptly respond to external stimuli and yet we spend many hours every day in this inherently risky behavioral state. This simple fact strongly suggests that sleep must serve essential functions that rely on the brain going offline, on a daily basis, and for long periods of time. If these functions did not require partial sensory disconnection, it would be difficult to explain why they are not performed during waking. Paradoxically, despite its central role in defining sleep and what sleep does, sensory disconnection during sleep remains a mystery. We have a limited understanding of how it is implemented along the sensory pathways, we do not know whether the same mechanisms apply to all sensory modalities, nor do we know to which extent these mechanisms are shared between non-rapid eye movement (NREM) sleep and REM sleep. The main goal of this contribution is to review some knowns and unknowns about sensory disconnection during sleep as a first step to fill this gap.

The evolutionary theory of aging, particularly antagonistic pleiotropy (AP), provides an account of the ultimate origins of aging. What remains unclear is the nature of the proximate mechanisms by which AP gives rise to diseases of aging, like cardiovascular disease and Alzheimer’s disease. Damage-centric theories focusing on loss of genetic and cellular function have been proposed, as well as programmatic theories focusing on unwanted gene and cellular function. The latter include the hyperfunction and developmental theory that view aging as the futile continuation, or run-on, of growth and developmental programmes into later life. Yet neither type of theory has performed well in explaining late-life disease aetiology, particularly with respect to disease onset, presentation and progression. What is proposed here in this review is a new programmatic theory of aging. We argue that the emergence of many specific diseases may involve quasi-programmes that are not the result of run-on, but rather are triggered by other factors in late life. Such triggers may be non-programmatic (e.g. infection, mechanical injury) or programmatic. Moreover, the consequent pre-pathological and pathological changes may in some cases trigger further changes, leading to futile and destructive cascades of quasi-programmes and pathology. The origins of triggered quasi-programmes can be traced to biological constraint i.e. the inability of organisms to optimise all functions at once. And, to some extent, the new theory presented here revises the understanding of AP. That is, because any gene can be triggered in an erroneous manner, every gene is potentially an AP gene that risks pathology, though level of risk varies according to constraint. To help validate the theory, we test it against several complex diseases of aging. The new model in this review attempts to provide a blueprint understanding that, to a certain extent, closes the gap in the causal chain of events between evolutionary causes of aging and the aetiology of age-related diseases. It also helps to explain why certain disorders mimic accelerated aging and how interventions, such as the suppression of IIS and mTOR retard many aspects of aging; notably, though, unlike prior programmatic theories, the new theory is not mTOR-centric. Finally, it provides new perspectives on possible treatment of aging.

Integrating numerous renewable resources has been extensively researched and studied to create a dependable energy system. This study investigated the best techno-economical hybrid energy system configuration while using hydrogen energy to keep the system's energy balanced. Additionally, this study aims to determine the best hybrid system configuration for the location under investigation. A novel technique of DBM (Deterministic Balanced Method) was introduced to determine the total annual energy output for the project's lifetime. This approach is used to contrast the outcomes of other HOMER software tools. Then, using HOMER, it is possible to confirm the sizing optimization results for the suggested method by comparing the power ratings and yearly energy output. A detailed comparison between our proposed method and HOMER Pro has been conducted for validation and verification. Our method has been rigorously tested in various hybrid off-grid energy systems, ensuring its applicability and reliability across different scenarios and configurations. The results of our study indicate a high degree of similarity between the proposed approach and HOMER pro for computing annual energy power for the studied energy systems. Specifically, our analysis revealed that the difference between the approaches was within a range of 5%, indicating a high level of consistency and reliability in our method. These findings suggest that our approach can be confidently applied to determine the appropriate size of hybrid energy systems accurately. Overall, our study provides valuable insights into the development of effective sizing methodologies for hybrid energy systems. After considering the amount of solar radiation and wind speed gathered by global weather data platforms like NASA and METEONORM, this paper has also included a real case study of the Cairo International Airport's hybrid renewable energy production systems. To guarantee the viability of this study, the system design was founded on an actual load that was researched and simulated. A cluster of distributed networks was finally proposed to use the excess energy and enable energy conversion processes to be used in industry and transportation applications.

The human immunodeficiency virus 1 (HIV-1) viral protease (PR) is one of the most studied viral enzymes, and approval of drugs targeting its catalytic activity opened the door to the develop-ment of highly active antiretroviral therapy (HAART). Despite the fact that its crucial role in viri-on maturation is well characterized, an increasing body of research is starting to focus on its abil-ity to cleave host cell proteins, based on recent advances in proteomics and genomics technologies. Such findings are apparently in contrast with the dogma of HIV-1 PR activity being restricted to the interior of nascent virions, and suggest catalytic activity within the host cell environment. Given the limited amount of PR present in the virion at the time of infection, it is tempting to specu-late that such events mainly occur during viral late gene expression, mediated by newly synthe-sized Gag-Pol polyprotein precursors, rather than at a very early stage of infection, before pro-viral integration. Among cellular targets of HIV-1 PR, three major clusters can be identified: pro-teins involved in viral and cellular translation, those controlling cell survival, and restriction fac-tors responsible for innate/intrinsic antiviral responses. Indeed, by cleaving host cell translation initiation factors HIV-1 PR can impair cap-dependent translation, thus promoting IRES-mediated translation of late viral transcripts and viral production, while by targeting several apoptotic fac-tors it modulates cell survival, thus promoting immune evasion and viral dissemination. Addi-tionally, HIV-1 PR counteracts restriction factors incorporated in the virion that would otherwise interfere with nascent virus vitality. Thus, HIV-1 PR appears to modulate host cell function at dif-ferent times and locations during its life cycle, to ensure efficient viral persistency and propaga-tion. This kind of PR-mediated host cell modulation is found in a plethora of different viruses and HIV-1 is no exception, and although we are far from having a complete picture, it is clear that the PR has a multifaceted role in interfering with host machineries to better suit viral replication, and is a field that needs to be explored further.

Two-wheeler vehicles are the most significant mode of transportation for Kenyans in both rural and urban regions thereby contributing to local air pollution, and greenhouse gas emissions (GHG). The transition to electric two-wheeler vehicles can make a significant contribution to reducing GHG and improving the socio-economic lives of people living in rural Kenya. Re-newable energy systems can considerably contribute to the charging of electric two-wheeled vehicles, thus leading to the reduction of carbon emissions and the expansion of renewable energy penetration in rural Kenya. Therefore, this paper focuses on integrating and modelling electric two-wheeled vehicles (e-bikes) into an off-grid photovoltaic Water-Energy Hub located in the Lake Victoria Region of Western Kenya using the Conventional and Renewable Energy Opti-mization (CARNOT) Toolbox in MATLAB / Simulink. Electricity demand data obtained from the Water-Energy Hub was investigated and analysed. Potential solar energy surplus was identified and electric two-wheeler vehicles were integrated based on the surplus. A field measurement investigation on the energy consumption of the electric two-wheeler vehicles based on the rider’s driving behaviour was also carried. The annual electricity demand of 27,267 kWh, photovoltaic (PV) electricity production of 37,785 kWh with an electricity deficit of 370 kWh were obtained from the simulation results. To reduce the electricity deficit, a load optimisation algorithm was de-veloped to optimally integrate the electric 2-wheeler vehicle into the Water-Energy Hub. It was found that using the load optimisation algorithm, the annual electricity deficit was reduced to 1 kWh and the annual electricity demand was increased by 11% (30,767 kWh) which is enough to charge 4 additional electric two-wheeler batteries daily.

Defect detection in ferromagnetic substrates is often hampered by non-magnetic coating thickness variation when using conventional eddy current testing technique. The lift-off distance between the sample and the sensor is one of the main obstacles for the thickness measurement of non-magnetic coatings on ferromagnetic substrates when using the eddy current testing technique. Based on the eddy current thin-skin effect and the lift-off insensitive inductance (LII), a simplified iterative algorithm is proposed for reducing the lift-off variation effect using a multi-frequency sensor. Compared to the previous techniques on compensating the lift-off error (e.g., the lift-off point of intersection) while retrieving the thickness, the simplified inductance algorithms avoid the computation burden of integration, which are used as embedded algorithms for the online retrieval of lift-offs via each frequency channel. The LII is determined by the dimension and geometry of the sensor, thus eliminating the need for empirical calibration. The method is validated by means of experimental measurements of the inductance of coatings with different materials and thicknesses on ferrous substrates (dual-phase alloy). The error of the calculated coating thickness has been controlled to within 3 % for an extended lift-off range of up to 10 mm.

The objective of this paper was to give an overview of the expressed preference (EP) techniques of environmental valuation. These methods offer estimation of the value of a resource not necessarily willingness to pay (WTP) or willingness to Accept (WTA) compensation rather upper and lower values. The method of measuring individuals’ willingness to pay is usually based on contingent valuation method (CVM). This research focuses on defining, categorizing, and applicability of various environmental valuation techniques that have been and can be applied in attaching value to a given resource using expressed/Revealed preference methods. The study serves as a supplementary synthesis and discussion to the board of knowledge of resource valuation methods. More specifically, selected methods to discussed herein include; contingent valuation method, hedonic pricing model, travel cost method, trade-off game method, the costless-choice method, Delphi method, Replacement Cost Method, Relocation Cost Method, Opportunity cost method, and Cost-benefit Method. In the last part, applicability of the methods is fully illustrated to support future studies on resource valuation.

From October 28 to November 05, 2013, we conducted a termite sampling in 3 protected sites in The Gambia (West Africa). Termites sampling is carried out in 100 m x 2 m transects repeated 3 times in each site. A total of 33 species of termites have been recorded. Of the 33 species, 22 are new to The Gambia. Additionnal measurements are given for several collected termite species. Euchilotermes arcuata Silvestri is elevated to the rank of species.

There is scientific consensus that organismal aging did not evolve by natural selection (NS) because it lacks individual benefit. Nonetheless it exists, leading to much speculation about its origins, and when the diminishing force of selection begins. Both concepts are based upon two misconceptions; that aging occurs in and of itself and is caused by the declining strength of NS during the reproductive lifespan. Although lacking individual benefit, aging evolved by NS as a tradeoff of survival for reproduction. Based upon regulatory dynamics that participate in this tradeoff, aging begins once reproductive success has been achieved through offspring nurturing. Thereafter, the strength of NS wanes to exponentially accelerate aging, leading to death. Assumptions of the theory are that: (1) a life-long, “holistic” regulatory mechanism whose genic expression is modified epigenetically, originates in ontogenesis; (2) the regulatory mechanism of the last developmental stage becomes redundantly expressed during “morphostasis”, a non-aging, life interval of peak vitality to ensure completion of reproduction through nurturing, and (3) thereafter, loss of regulatory redundancy causes aging which reduces the strength of natural selection and allows accumulation of randomly occurring somatic damage.

In this study, I will present some documentary evidence that Carlos Drummond de Andrade’s poem “A Máquina do Mundo” [The Machine of the World] (1949) was based on prior reflections contained in a forgotten newspaper article entitled “Poesia e Pesadelo” [Poetry and Nightmare] (1949). In that article, Drummond critically analyzed some of the theses of Stephen Spender's essay “What Is Modern in Modern Poetry” (1948), which had just been published in The Tiger's Eye magazine. As soon as he read Spender's text, Drummond wrote “Poetry and Nightmare” and began to elaborate a narrative poem whose protagonist would be a machine. All the documentary evidence indicates that Drummond took Spender's lessons as touchstones for the elaboration of the narrative and allegorical structure of “The Machine of the World.” According to the interpretation I am proposing here, Drummond, in writing the machine poem, put into practice at least six lessons drawn from Spender’s essay, namely: 1) the modern poet must represent the tension between the external machinelike landscape and the landscape of the inner world of the creative imagination; 2) he must also represent the machinelike, ugly, and urban world around him in a beautiful and poetic way; 3) he must avoid the misconceptions of excessive utopian visionarism, as well as creeping realism; 4) he must reject the imperative of political engagement, whose principle of action states that poetry has a transformative mission in society; 5) he must free himself from the obsession with free verse as the only form of modern poetry and start using the traditional fixed forms; 6) he must understand machines as poetic symbols of human passions, and not just as exotic objects foreign to human reality. My conclusion is that, after reading Spender’s essay, Drummond changed his aesthetic and philosophical understanding of what defines the essence of modern poetry, both in terms of form and content.

The multiple regression method is still an important tool for establishing precipitation forecast models with a lead time of one season. This study developed a flexible statistical forecast model for July precipitation over the middle-lower reaches of the Yangtze River (MLYR) based on the prophase winter sea surface temperature (SST). According to the characteristics of observed samples and related theoretical knowledge, some special treatments (i.e., more flexible and better–targeted methods) were introduced in the forecast model. These special treatments include a flexible MLYR domain definition, the extraction of indicative signals from the SST field, artificial samples, and the amplification of abnormal precipitation. Rolling forecast experiments show that the linear correlation between prediction and observation is around 0.5, more than half of the abnormal precipitation years can be successfully predicted, and there is no contradictory prediction of the abnormal years. These results indicate that the flexible statistical forecast model is valuable in real-life applications. Furthermore, sensitivity experiments show that forecast skills without these special treatments are obviously decreased. This suggests that forecast models can benefit from using statistical methods in a more flexible and better-targeted way.

Physics lacks a confirmed description of dark matter, has yet to develop an adequate understanding of dark energy, and includes unverified conjectures regarding new elementary particles. This essay features modeling that addresses those problems and explains otherwise unexplained data. Our modeling starts from five bases – multipole expansions for the electromagnetic and gravitational fields associated with an object, the list of known elementary particles, some aspects of mathematics for isotropic harmonic oscillators, concordance cosmology, and a conjecture that the universe includes six isomers of most elementary particles. The multipole expansions – which have use in conjunction with Newtonian kinematics modeling, special relativity, and general relativity – lead to a catalog of kinematics properties such as charge, magnetic moment, mass, and repulsive gravitational pressure. The multipole expansions also point to all known elementary particles, some properties of those particles, and properties of some would-be elementary bosons and elementary fermions. The harmonic-oscillator mathematics points to Gauge symmetries regarding some elementary bosons. The would-be elementary fermions lack charge and would measure as dark matter. The conjecture regarding six isomers of most elementary particles rounds out and dominates our specification for dark matter. Five of the isomers form the basis for most dark matter. Our modeling explains ranges of observed ratios of dark matter effects to ordinary matter effects – for the universe, galaxy clusters, two sets of galaxies observed at high redshifts, three sets of galaxies observed at modest redshifts, and one type of depletion of cosmic microwave background radiation. Our description of repulsive gravitational pressure points toward resolution for tensions – between data and modeling – regarding the recent rate of expansion of the universe, resolution for possible tensions regarding large-scale clumping, and resolution for possible tensions regarding interactions between neighboring galaxies. Our work regarding gravity, dark matter, and elementary particles suggests characterizations for eras that might precede the inflationary epoch, a mechanism that might have produced baryon asymmetry, mechanisms that govern the rate of expansion of the universe, and insight about galaxy formation and evolution.

The article concerns a relatively small but important fragment of John Paul II's pastoral activity, namely his pilgrimages to Poland: the nature of these pilgrimages, their historical background and teaching - especially to the extent that went beyond the immediate and Polish context. The text is the result not only of reading papal statements, but also of personal observation of the political and social atmosphere. The first two parts contain a concise description of the Pope's eight pilgrimages to Poland (before and after the political transformation). The third highlights out the main universal themes raised by the Pope: the dignity of the person, truth and freedom. During consecutive pilgrimages to Poland, he deepened and expanded the themes of his teaching. This collection of his sermons and speeches to Poles constitutes a comprehensive (devoid of redundant repetitions and omissions) treatment of important social, philosophical and theological issues. John Paul II, when speaking to Poles and about Poles, did not lose his universal perspective; he appealed both to Christians and to all people of good will. Papal pilgrimages to Poland are a significant part of modern Polish history, and their message is a valuable intellectual and spiritual gift.

This study investigates the spatio-temporal variability of the onset, offset, and Length of the rainy season in Senegal over the 1981-2018 period. The onset, offset dates, and length of the rainy season are crucial parameters for agricultural planning in West Africa, which exhibits high interannual and spatial variability in rainfall. The objective is to detect and spatially classify these phenological parameters across Senegal using different approaches. Daily precipitation data from the Climate Hazards group InfraRed Precipitation with Stations (CHIRPS) dataset over the study period and ERA5 reanalysis were used. The method of was applied to detect the onset, offset dates, and length of the rainy season. The Kohonen algorithm was then used to spatially classify these parameters on topological maps. A hierarchical ascendant classification was also performed to reduce the number of classes obtained. Finally, a composite analysis of moisture transport before the onset and end of the 1984 and 2007 seasons was conducted with ERA5 data. The results show a meridional gradient of the start of the season, progressively later from southeast to northwest, while the end follows a north-south gradient. The duration of the rainy season ranges from 45 days in northern Senegal to 150 days in the south. The maximum number of dry days also decreases from north to south. The Kohonen self-organizing maps allow spatial prediction of the onset, end date, and duration of the rainy season across Senegal. The dynamics analysis reveals that early onset years are associated with stronger and earlier northward moisture transport over West Africa, underscoring the role of this parameter in triggering the rainy season. These promising results can provide an early warning to policymakers and farmers on the start and end dates of the season in each area of Senegal.

Today, enhancing food preservation and safety in the spirit of the bioeconomy suggests the use of biodegradable polymers such as poly-L-lactic acid (PLA) in food packaging and the replacement of chemical additives with natural antioxidant/antibacterial agents such as essential oils and their derivatives. Herein a novel carvacrol (CV) @ natural zeolite (NZ) nanohybrid was developed by employing a new vacuum adsorption desorption method which results in the adsorption of a high CV amount on NZ equal to 61.7 %wt. This CV@NZ nanohybrid was successfully dispersed in a PLA/triethyl citrate (TEC) matrix via a melt-extrusion process to obtain PLA/TEC/xCV@NZ nanocomposite films with 5, 10 and 15 CV@NZ %wt. content. PLA/TEC/xNZ films were also de-veloped for comparison. The overall study resulted in a biodegradable active film with the fol-lowing properties: 10%wt. CV@NZ content (PLA/TEC/10CV@NZ), self-healable properties, 22% higher tensile strength and 40% higher elongation at break, 45% higher water barrier and 40% higher oxygen barrier than pure PLA/TEC matrix. This film also provides high CV release content, high CV control release rate as well as significant antioxidant activity and antibacterial activity against the food pathogens Staphylococcus aureus and Salmonella enterica spp. enterica serovar Typhimurium. This film not only succeeds in extending the shelf-life of fresh pork minced, as shown by total variable count measurements in four days, but also prevents lipid oxidation of fresh minced pork and maintains the minced meat in higher nutritional conditions, as revealed by the heme iron content determination, and in a much better and acceptable sensory condition than the commercial packaging paper.

Chronic rhinosinusitis (CRS) is a complex inflammatory condition affecting the nasal and paranasal sinus mucosa. Gastroesophageal reflux disease (GERD) has been implicated as a potential exacerbating factor in CRS, but the specific endoscopic features of nasopharyngeal pathology in this context remain poorly understood. Background and Objectives: CRS is a multifactorial disease with various underlying etiologies, including inflammation, anatomical factors, and environmental triggers. While GERD has been suggested as a potential contributor to CRS, the specific endoscopic features indicative of nasopharyngeal pathology in CRS patients with GERD symptoms have not been clearly elucidated. Our aim is to identify specific endoscopic features of nasopharyngeal pathology in patients with CRS associated with GERD symptoms, and to propose a method for assessing the influence of GERD on the mucosal layer of the nose and nasopharynx. Materials and Methods: We conducted a cross-sectional observational study involving 521 adult patients presenting with symptoms suggestive of CRS. From this cohort, 95 patients with the highest scores on the Reflux Symptom Index (RSI) and Reflux Symptom Score-12 (RSS-12) questionnaires were selected as the main group. Endoscopic examinations were performed to assess the nasal and nasopharyngeal mucosa. Results: Our study revealed significant alterations in the nasopharyngeal mucosa of patients with CRS associated with GERD symptoms. Increased vascularity of the nasopharyngeal mucosa was observed in 91 patients (95.7%), while hypertrophy was noted in 83 patients (87.4%). Mucus was present in the nasopharynx of 77 patients (81.1%), exhibiting varying characteristics of color and consistency. Asymmetric hypertrophy of the oropharyngeal mucosa was noted in 62 patients (65.3%). Conclusions: We propose a method for assessing the influence of GERD on the mucosal layer of the nose and nasopharynx, which may aid in diagnostic and management decisions. Further research is warranted to explore the potential impact of GERD symptoms on the course and severity of CRS exacerbations.

Given the significant role of the Ningxia Urban Agglomeration along the Yellow River in reshaping the urban network and promoting coordinated development in the upper Yellow River region of China, this paper takes enterprise flow as the explicit manifestation of the regional urban network. Based on the data of registered enterprises from 2005 to 2021, combined with the interlocking network model, social network analysis method, and spatial panel econometric model, this paper interprets the evolution of the regional urban network structure and its influencing mechanisms through the different types of enterprise flow. The results indicate the following: (1) The external network is primarily focused on outflow investments towards North China, East China, and Northwest China. The overall inflow sources form a multi-origin structure dominated by North China and East China. The Jinfeng and Xingqing serve as core hubs for enterprise exports in the external network and destinations for incoming enterprises. However, in the Productive manufacturing connections, a spatial organizational pattern driven by multiple cities has formed. (2) In the internal network, a concentric connection structure centered around the Jinfeng and Xingqing has formed. The Productive service connections are relatively active, while the Productive manufacturing connections are relatively concentrated between the Jinfeng, Xingqing, Ningdong, and Lingwu. However, there is an imbalance in the spatial connections within the urban agglomeration network and an incomplete hierarchical system of network nodes. (3) In the external network, the main feature is the absorption of external elements to foster development momentum. In the internal network, the Jinfeng and Xingqing serve as contact and radiation sources, influencing various nodes. However, their driving capacity is weak. (4) The market demand and coordinated development both demonstrate significant promoting effects on the connections within the external and internal networks. The sluggish adjustment and transformation of regional industrial structure have resulted in a temporary negative inhibitory effect on the development of transformation. The negative impact of urban investment activities and the positive impact of government management are reflected within the internal network. (5) The improvement of urban management and service functions, as well as external borrowing, can promote the connection in different network. However, the borrowing economic activity can have a negative impact in different networks. (6) Industrial agglomeration can promote enterprises connections in different networks and generate significant spatial spillover effects.

Introduction The Pericapsular Nerve Group (PENG) block is a novel technique that allows for analgesia of the anterior hip capsule via the articular branches of the accessory obturator nerve and femoral nerve, which have a significant role in the innervation of the hip capsule. PENG blockade is effective in both adult and pediatric patients. However, there are no studies in the available literature on patients under five years of age. Herein, we describe our experience with two pediatric patients with hip dysplasia. Purpose This study aimed to evaluate the analgesic effect of the pericapsular nerves group (PENG) in small children undergoing hip surgery. Patients and methods This study included two patients, aged 2 and 4 years old, who qualified for hip surgery. General or spinal anesthesia with the addition of a PENG block was performed. During the procedure, the basic hemodynamic parameters were monitored. After the surgery, the patients received 15mg/kg-1 iv paracetamol every 6 hours to prevent rebound pain. The pain was assessed using the FALCC score. The 15mg/kg-1 metamizole was administered if the FLACC score was 3. In the FLACC score 4, the application of 0,2mg/kg-1 Nalpain was ordered. Results The patient's hemodynamic parameters were stable and within normal range. FLACC scores from all patients ranged from 0 and 3 in the first 24 h period. One patient required metamizole 12 hours after surgery. No evidence of block complications was observed. Conclusions This case series showed that PENG block provided adequate postoperative analgesia and assured opioid-free pain management. However, we are convinced that future randomized, controlled trials are needed in this field.

For the problem of poor accuracy of the existing multi-rate simulation methods, this paper proposes a multi rate real-time simulation method based on the Norton equivalent, compared with multi-rate simulation method based on the ideal source equivalent. After the Norton equivalence of the fast subsystem and the slow subsystem, they are obtained simultaneously at the junction nodes. In order to reduce the amount of simulation calculation, the Norton equivalent circuit is obtained by incremental calculation. The data interface between the fast subsystem and the slow subsystem is realized by extrapolation method. For ensuring the real-time performance of the simulation, the method that the slow subsystem calculates ahead of the fast subsystem is given for the slow subsystem with a large amount of calculation. Finally, the AC/DC hybrid power system was simulated on the real-time simulation platform (FRTDS), and the simulation results were compared with the single-rate simulation, which verified the correctness and accuracy of the method.

The results shown in this paper extend our research group's previous work, which presents the theoretically achievable hydrogen engine-out NOx (H2-NOx) Pareto front of a hydrogen hybrid electric vehicle (H2-HEV). While the Pareto front is calculated offline, which requires significant computing power and time, this work presents an online-capable algorithm to tackle the energy management of a H2-HEV with explicit consideration of the H2-NOx trade-off. Through the inclusion of realistic predictive data on the upcoming driving mission, a model predictive control algorithm (MPC) is utilized to effectively tackle the conflicting goal of achieving low hydrogen consumption while simultaneously minimizing the NOx. In a case study it is shown that the MPC is able to satisfy user-defined NOx limits over the course of various driving missions. Moreover, a comparison to the optimal Pareto front highlights the MPC's ability to achieve close-to-optimal fuel-performance for any desired cumulated NOx target on four realistic routes for passenger cars.

In this paper, low circumferential reciprocating load foot-scale tests were performed on two truncated PHC B 600 130 tubular piles with bearing nodes to characterize the damage process and morphology of the specimens and to investigate the load-carrying performance of the members. The test results reveal that under the action of tensile-bending-shear loading, the bearing concrete in the node area buckles and is damaged, the anchored reinforcement in the node area yields, the constraint is weakened, an articulation point is formed, and the node rotational capacity increases. When the embedment depth increases from 200 mm to 300 mm, the ultimate bearing capacities of the positive and negative nodes increase by 57.60% and 54.60%, respectively. A numerical simulation is used to verify the test results. Considering the three types of piles with truncated nodes, the numerical simulation is used to analyze the node-bearing capacity at different embedment depths. Finally, two preferred node types are proposed as follows: pipe pile core-filled longitudinal reinforcement anchored into the bearing node and pipe pile body longitudinal reinforcement anchored into the bearing node + pipe pile core-filled longitudinal reinforcement anchored into the bearing node, with preferred embedment depths of 350 mm and 200 mm, respectively.

Abstract: Intra-abdominal abscesses (IAA) may commonly arise following complicated gastrointestinal tract infections and, on occasion, from infections within the urinary system. Many of these IAA are initiated as a consequence of post-surgical complications. These abscesses have a substantial risk of morbidity and mortality. As a result, it is crucial to diagnose and treat them promptly to minimise these adverse outcomes. Therefore, radiological modalities play a vital role in diagnosing, localising, and detecting associated complications of IAA, as sometimes other investigations could be less reliable and non-specific. Radiological modalities are pivotal in achieving an accurate diagnosis, localising the abscesses, and identifying associated complications. This is especially important since alternative investigative methods may be misleading in certain situations. Radiological techniques such as ultrasound scans (USS), contrast-enhanced computed tomography (CECT), and even magnetic resonance imaging (MRI) are immensely helpful in diagnosing these conditions. These imaging tools guide clinicians in determining the most appropriate patient management strategies. In this article, we compile a case series involving tubo-ovarian abscess, appendicular abscess, diverticular abscess and infected walled-off pancreatic necrosis, paying particular attention to radiological features in the diagnosis. Furthermore, we reviewed the existing literature to delineate characteristic radiological features related to the cases we discussed.

To investigate the mass mortality of asari clams triggered by upwelling-driven hypoxia, we conducted biological and oceanographic observations of the Rokujo tidal flat in Mikawa Bay, central Japan. In addition, a simple laboratory experiment was conducted using sediments on a tidal flat containing macrobenthos to examine the possibility of hydrogen sulfide formation in tidal flats. The results of field observations showed that the number and biomass of asari clams decreased from September to October in the tidal flat when hypoxia was intermittent. In particular, hypoxia persisted for approximately one week from September 21, which was associated with the calm weather and stagnation of tidal currents owing to the neap tide. The hydrogen sulfide concentration in the water directly above the sediment exceeded 30 mg L-1 after 3 days of incubation. Our results suggest that the mass mortality of asari clams may be caused by the high concentration of hydrogen sulfide produced by sulfate reduction, which is attributed to the chain of biological die-off caused by the upwelling of hypoxic water mass accompanied by meteorological events, and calm conditions such as the neap tide period.

Abstract: Background and objectives: Symptomatic walled-off pancreatic necrosis is a serious local complication of acute necrotising pancreatitis. The endoscopic step-up approach is the standard treatment for symptomatic walled-off pancreatic necrosis; however, adjunctive radiologic percu-taneous drainage for this condition is controversial. This study compared the clinical and radio-logic resolution of walled-off pancreatic necrosis achieved with the endoscopic step-up approach with or without radiology-guided percutaneous drainage. Material and Methods: This retrospective, single-center cohort study enrolled patients with symp-tomatic walled-off pancreatic necrosis who underwent endoscopic transmural drainage (ETD) followed by directed endoscopic necrosectomy (DEN) with or without radiology-guided drainage. A total of 34 patients (endoscopic approach, n=22; combined modality approach, n=12) underwent the endoscopic step-up approach (ETD followed by DEN). Baseline characteristics, clinical success, and resolution of necrosis were compared between groups. Results: All patients achieved symptom resolution from walled-off pancreatic necrosis. The mean patient age was 58.4 years, and 21 (61.8%) were men. After treatment with the endoscopic approach and combined modality approach, clinical success was achieved in 90.9% of patients within 11.5 days, and 66.7% of patients within 16.5 days, respectively. Both the total hospital stay (55 days vs 71 days; p=0.071) and time to complete radiologic resolution were shorter (93 days vs 124 days; p=0.23) in the endoscopic approach group. Conclusion: The endoscopic step-up approach resulted in the clinical resolution of symptomatic walled-off pancreatic necrosis comparable to that of the combined modality drainage. However, the endoscopic approach alone allows higher clinical success, early clinical and radiologic resolution, and a shorter hospital stay.

Ocean wave energy conversion as one of the renewable clean energy sources is attracting the research interests of many people. This review introduces different types of power take-off technology of wave energy converters. The main focus is the linear direct drive power take-off devices as they have the advantages for ocean wave energy conversion. The designs and optimizations of power take-off systems of ocean wave energy converters have been studied from reviewing the recently published literature. Also, the simple hydrodynamics of wave energy converters have been reviewed for design optimization of the wave energy converters at specific wave sites. The novel mechanical designs of the power take-off systems have been compared and investigated in order to increase the energy harvesting efficiency.

This article presents a novel analysis of Indus Seal M-282 [1] excavated from Mohenjo-Daro, a key Indus Valley Civilization site. Utilizing the proposed Sindhu Prakrit alphabet, the study investigates the relationship between the seal's iconography and the inscribed text. By examining the potential for a close correlation between these elements, the analysis aims to decipher the meaning embedded within the seal's motifs, potentially offering new insights into Indus Valley communication and symbolism.

Trend patterns of melanoma skin in Serbia from 1999 to 2020 *Rancic K. Natasa 1,2, Tiodorovic B. Danica 1,4, Ilic V. Mirko 2, Biljana N. Kocic 1,2, Maksimovic S. Natasa 3, Ilija D. Kocic 4, Dusan P. Miljkovic 4, Otasevic A. Suzana 1,2 Introduction. Melanoma of the skin represents about 1% of all skin cancers and it causes nearly 80% of skin cancer deaths. Due to its increasing incidence, particularly in the most developed countries it represents a great challenge for primary prevention. Objective. To explore patterns and analyze incidence trends of melanoma in Central Serbia from 1999 to 2020. Materials and Methods. Descriptive study was done and data were obtained from the Population-based Cancer Registry of Serbia. The joinpoint regression analysis was done to assess the incidence trend of the melanoma skin: the annual percent change (APC) along with its 95% confidence interval (95% CI) was calculated. Results. A total number of 9952 new melanoma cases were registered melanoma (5204 in males and 4748 in females) during the observed period. Males represented 52.3% of all patients, with male to female ratio of incidence 2.09:1. A non significant increasing trend of incidence in males from 1999 to 2013 with APC of 2.53% (95%CI: from -18.2 to 21.9, p=1) and significantly increasing trend from 2013 to 2020 with the APC of 11.29 % (95%CI: from 1.4 to 5.8, p<0.001) was established. An incidence trend in females has stabilized in the whole studied period, with APC of 0.42% (95%CI: from -3.3 to 6.8, p=0.1). Melanoma of the skin was not common before the age of 30. Out of all cases and about of 76% new cases were diagnosed in persons ≥ 50 years of age. Conclusion. The incidence trend of new melanoma cases significantly increase in the whole population from 1999 to 2020. The significant increasing of incidence trend in males and stabilization of incidence trend in females was established. Males had significantlly higher incidence rates than femalesand over of 76% new melanoma cases were diagnosed in persons above 50 years of age.

Background: In the current era of globalization, the Indonesian government's problem today is the weakening of nationalism and patriotism among the millennial generation. The large number of foreign cultures that have entered Indonesia has caused a sense of nationalism and patriotism. In addition, Indonesia is also facing the problem of spreading the Covid-19 virus. During the pandemic, various policies set by the government received protests from some circles because they felt their freedom was restricted. Therefore, the awareness of millennial generation nationalism is needed, especially during the Covid-19 pandemic like today. This research aims to make millennials aware of nationalism sense, which mainly to prevent the spread of Covid-19. This research is used to answer the questions of what the problems that arise due to the waning of the spirit of nationalism during the pandemic are? and what efforts should be made to maintain the spirit of nationalism? Methods: This research is a qualitative study using the literature review method. The articles used are research published in 2019 to 2021 in Google Scholar, with keywords that match the topic of millennial generation nationalism in the Covid-19 pandemic. Results and Discussion: The results of the study found that the spirit of Indonesian nationalism during the Covid-19 pandemic was decreasing. The decline in the sense of nationalism is due to several government policies that impact the psychology of society and the Indonesian economy. As a result, society, particularly the millennial generation, must play a role in breaking the chain of the Covid-19 virus's propagation by following the government's health standards. Conclusion: The government and society need to work together to understand nationalism in the millennial generation, especially in dealing with problems caused by the Covid-19 pandemic. Based on this, various efforts need to be made to foster the spirit of nationalism and overcome the Covid-19 pandemic. So that later, it can produce a generation that upholds the value of nationalism in everyday life.

In this note, the toy-model of Fourth Generation quarks coupling to Standard Model particles through unknown Lagrangian has been figured. Eventually producing a 103 TeV vector gauge boson, which is a special gauge boson that appears in unification models and here as a mediator for WeakSM4 interaction. Another anomaly of different gauge boson has been reported.

This note will be a brief account of an unknown vectorial mathematical current in SM4 Field based on disintegrating the Lagrangian of quarks in SM4 into four parts. It is shown that the current breaks while interacting with the quarks and makes the quarks to not interact with fourth-generation quarks. This note also shows that gauge bosons are produced while these currents symmetry break and provides the service as mediators.

This study investigates the latest advancements in utilizing machine learning techniques for predicting financial market movements. Financial markets are complex systems influenced by numerous factors, making accurate predictions challenging but highly valuable. The research explores various machine learning approaches, including supervised learning, unsupervised learning, reinforcement learning, and deep learning, to enhance the accuracy and reliability of financial market forecasts. The study provides a comprehensive review of current methodologies, highlighting key innovations and their applications in financial market prediction. Techniques such as neural networks, support vector machines, random forests, and ensemble methods are examined in the context of their ability to analyze vast amounts of financial data, identify patterns, and generate actionable insights. Additionally, the research delves into the integration of alternative data sources, such as social media sentiment, news articles, and macroeconomic indicators, to improve prediction models. Through empirical analysis and case studies, the study demonstrates the effectiveness of advanced machine learning models in predicting stock prices, currency exchange rates, and commodity prices. It also discusses the challenges associated with these techniques, including overfitting, data quality issues, and the need for interpretability in model outputs. Findings suggest that machine learning techniques can significantly enhance the predictive power of financial models, offering more accurate and timely insights for investors and financial analysts. The study concludes with recommendations for future research directions, emphasizing the importance of model transparency, the incorporation of diverse data sets, and the continuous adaptation of machine learning algorithms to evolving market conditions.

The theory says that the first things to exist in the universe and the current moment were driven by an imperative need; that is, the intensities of the physical concept specify influence the existence of elements and facts based on the countless observations in physical spaces in relation to elements and facts. The existence of mandatory elements in space is motivated by the characteristics of the spaces that offer conditions for such an obligation. The theory states that the universe did not arise by chance; that is, the universe emerged through determination influenced by its surroundings. The objective of the study is to help explain the elements and facts of the universe from its origins to the present.

(1) Background: Violence against each other via social media has increased and caused cyberbullying that can happen anytime through electronic communication tools that everyone can access easily. So, this study aims to investigate causal factors contributing to youth cyberbullying in Thailand's three Southern border provinces. (2) Methods: The subject group consisted of 340 youths and the data were analyzed with structural equation modeling (SEM). (3) Results: The study found that the model of the causal factors resulting in youth cyberbullying in the three Southern border provinces was consistent with the empirical data (the relative chi-square (χ2/df) was 1.77. The goodness-of-fit index (GFI) was 0.95. The root-mean-square-error of approximate (RMSEA) was 0.049). Cyberbullying was positively influenced directly and indirectly by negative upbringing, the influence of personal violence, and the influence of media violence at a statistically significant level of 0.001, with total effect sizes of 1.13, 0.74, and 0.64, respectively. Additionally, cyberbullying was positively influenced directly by negative mental traits with a statistically significant level of 0.05 and a total effect size of 0.17. (4) Conclusions: The study results could be beneficial in concretely forming policies and strategies to prevent and mitigate the problem of youth cyberbullying.

Measurements of complex magnetic permeability, μ(f,H)=μ′(f,H)-iμ″(f,H) and dielectric permittivity ε(f,H)=ε′(f,H)-iε″(f,H), in the frequency range, f of (0.4-7) GHz, and polarizing field, H of (0–135) kA/m, were performed, for a kerosene-based ferrofluid with magnetite nanoparticles. Based on these measurements, the phenomenon of ferromagnetic resonance was highlighted and some microwave propagation parameters of the ferrofluid were determined: the attenuation constant, α(f,H), and the reflection coefficient, R(f,H), at the air-material interface. Knowing these parameters we proposed a theoretical model establishing for the first time a new equation that allows the calculation of the overall reflection coefficient, Rw(f,H), of a ferrofluid with thickness d, deposited on a totally reflective support, following multiple internal reflections of the electromagnetic wave in the material. The results show that by increasing both, H, and d, the parameter, Rw(f,H) presents a minimum that decreases from 0.90 (for d=2mm) to 0.64 (for d=10 mm), at frequency f=5 GHz, which indicates an increase in the absorption of the electromagnetic wave by the ferrofluid. The obtained results are useful in the study of some materials that could be used as electromagnetic absorbers in the microwave range, by the determination of the overall reflection coefficient, Rw(f,H), controlled both by the thickness, d , of the absorber and by the external applied field, H.

The recent global calamity of sea level rise and flooding is a major disaster. Some settlements on Java Island, Indonesia, have been reported to be sinking. Bedono Village is one village on the Central Java Coast that is vulnerable to sea level rise. Aside from the possibility of sea level rise, the calamity in this village is linked to prior mangrove degradation and fish pond expansion. This tragedy has displaced 78.63% of the population over a decade, and the remaining population is still surviving in the remaining lands. This study aims to investigate the effects of sea-level rise-related permanent inundation on the lives of the remaining residents in Bedono Village, with a focus on their adaptation and resilience methods. The results disclosed that remaining populations have taken active initiation by adopting multiple strategies that include structural prevention measures and nature based solution through mangrove reforestations. As a result based on mangrove assessment using Geographic Information Systems, mangrove cover increased from 1 ha in 2010 to 9.5 ha in 2012. This achievement has provided an alternative income through mangrove ecotourism. Women and multi stakeholder participation have also contributed to the implementation of adaptation strategy. Despite those significant achievements, the adaptation and resilience was challenged by lack of education and awareness towards sea level rise issues and their confounding disasters. The nature-based solution and local wisdom in Bedono Village is an example that is in line with GPDRR UNDRR 2022, the Sendai Framework, and The Bali Agenda for Resilience that ensures a whole-of-society approach to sea-level rise by ensuring that no one is left behind, creating an inclusive environment, and promoting gender.

In light of climate changes, technological development and the use of renewable energy sources are considered very important nowadays, both in newly-designed structures and reconstructed historic building, resulting in the reduction of the commercial energy consumption and CO2 environmental emissions. This paper explores the possibilities of improving the energy efficiency of heritage sacred buildings by utilizing photovoltaic systems. As an exceptionally significant cultural good, the Cathedral of St. Michael the Archangel in Belgrade shall serve as a case study, with the aim of examining the methods of mounting photovoltaic (PV) panels, by taking into account the fact that the authenticity and the aesthetic value of this cultural monument must remain intact. A comparative analysis of the two options for installing PV panels on the southwestern roof of the church was performed using simulations in PVgis and PVsist V6.84 software, with the aim of establishing the most efficient option in terms of power generation. The simulation results show that photovoltaic panels can produce 151650 kWh (Option 1) and 150894 kWh (Option 2) per year, while the required amount of energy is 42726.77 kWh. The electricity produced exceeds the electricity requirements for the decorative lighting of the Cathedral Church, so it can be used for other purposes in the sacral complex.

In light of climate changes, technological development and the use of renewable energy sources are considered very important nowadays, both in newly-designed structures and reconstructed historic building, resulting in the reduction of the commercial energy consumption and CO₂ environmental emissions. This paper explores the possibilities of improving the energy efficiency of heritage sacred buildings by utilizing photovoltaic systems. As an exceptionally significant cultural good, the Cathedral of St. Michael the Archangel in Belgrade shall serve as a case study, with the aim of examining the methods of mounting photovoltaic (PV) panels, by taking into account the fact that the authenticity and the aesthetic value of this cultural monument must remain intact. A comparative analysis of the two options for installing PV panels on the southwestern roof of the church was performed using simulations in PVgis and PVsist V6.84 software, with the aim of establishing the most efficient option in terms of power generation. The simulation results show that photovoltaic panels can produce 151650 kWh (Option 1) and 150894 kWh (Option 2) per year, while the required amount of energy is 42726.77 kWh. The electricity produced exceeds the electricity requirements for the decorative lighting of the Cathedral Church, so it can be used for other purposes in the sacral complex.

In the context of the increasing migration into Germany that has taken place in recent years and German efforts to establish an inclusive school system, which enables learners from different religious, ethnic, language and social backgrounds with and without disabilities to participate, religious education has become a key topic for interdisciplinary discourse between theology, philosophy, and pedagogy in German schools. The following questions are of special interest: How can we manage diversity in inclusive classroom settings in general, and specifically: how can we do so with regard to worldview diversity? Does worldview diversity in schools exist, and if so, how can we recognize it in its plurality and complexity? How can we acknowledge different worldviews in the context of a changing inclusive school system? In this article, we would like to present the theoretical foundation, the research setting and the first findings of our ongoing pilot studies of worldview education at an inclusive German school. The experiments are part of a larger project context that is also described. The case study presented in this article, in which innovative language and machine learning technology was used for data analysis, illustrates the potential of inclusive methods and didactic concepts such as Universal Design for Learning [1], Learning in the Presence of the Other [2,3] and Reflexive Inclusion [4] for inclusive worldview education in the context of a religiously pluralized and secularized society.

According to the current understanding, the recently observed accelerated expansion of the universe is caused by the dark or the vacuum energy. Attempts to calculate the magnitude of this energy using the standard model of particle physics led to values which are 59 – 120 orders of magnitude larger than the experimentally estimated one. Even though the expanding space has positive internal energy, in a flat universe it is completely balanced by the negative energy of gravitational field making the net energy equal to zero. However, the current physical theories may breakdown for times less than or on the order of Planck time and one cannot assume that the above assertion concerning the balance of two energies is valid also in this time scale. In this note it is assumed that this balance of the two energies during the creation of new space as the universe expands takes place only for times larger than the Planck time. If this assumption is correct, the net energy of the newly created space remains positive for times on the order of Planck time and the positive vacuum energy has to be burrowed from empty space before it is being balanced by gravity. This can happen only within the restrictions of the time-energy uncertainty principle. In this note it is shown that such considerations lead to a vacuum energy density of about 0.3 Nanojoules per cubic meter which has to be compared with the measured value of 0.6 Nanojoules per cubic meter.

Carotid atherosclerotic lesions are a major cause of cerebrovascular disease (CVD). Identification and quantification of carotid plaques are important for categorizing the vulnerability of plaques for rupture and assessing the impact of treatments. The irregularity of plaque surface is associated with previous plaque rupture and plays an important role in the risk of stroke. Thus, the aim of this study is to develop and validate novel vulnerability biomarkers from three-dimensional ultrasound (3DUS) images by analyzing the surface morphological characterization of carotid plaque using fractal geometry features. 3D box-counting and 3D blanket are the two types of 3D fractal dimension that were employed to describe the smoothness of plaques. This fractal dimension analysis tool was used to evaluate the effect of atorvastatin using 3DUS carotid images, which were acquired from 6 patients treated with atorvastatin with 80 mg daily and 5 patients with placebo. The Student's T Test results showed that those two fractal features were effective for detecting the statin-related changes in carotid atherosclerosis with p<0.0068 and p<0.015 respectively, suggesting that 3D fractal dimension measurements can be used effectively to analyze the surface characteristics of carotid plaques, especially for evaluating the impact of the treatment.

A methodology for selecting rational parameters of atmospheric aircrafts at the initial stages of design using an optimization algorithm of differential evolution and numerical mathematical modeling of aerodynamics problems is proposed. The technique involves the implementation of weight and aerodynamic balance in the main flight modes, has the ability to consider atmospheric aircrafts with one or two lifting surfaces, apply parallel calculations and automatically generate a three-dimensional geometric model of aircraft appearance based on the optimization results. A method for accelerating the process of optimizing the parameters of an aircraft in terms of take-off weight by more than three times by introducing a objective function into a set of design variables is proposed and demonstrated. The results of assessing the reliability of the used mathematical models of aerodynamics and the correctness of the calculation the objective function, taking into account various constraints, are presented. A comprehensive test of the performance and efficiency of the methodology is considered by solving demonstration problems to optimize more than ten main design parameters the appearance of two existing heavy-class unmanned aerial vehicles with known characteristics from open sources.

Retinoids are vitamin A derivatives and include trans-retinoic acid, isotretinoin, tamibarotene, and bexarotene, all of which are currently available for clinical use. The clinical development of retinoid therapy for neuroblastoma has a history spanning more than four decades. The most promising agent is isotretinoin, which can contribute to improving event-free survival in patients with high-risk neuroblastoma by approximately 10 % when administered over six months as maintenance therapy. Although isotretinoin is regarded as an essential component in the standard clinical management of high-risk neuroblastoma, its use for this purpose in the US and EU is off-label. To promote isotretinoin use in Japan as a treatment for neuroblastoma, our clinical research team is planning to launch an investigator-initiated, registration-directed clinical trial. The present review article discusses the basic science behind retinoid therapy, pre-clinical / clinical evidence on neuroblastoma, the concept of the proposed clinical trial, and prospects for this therapy.

: Chemical accidents can occur anywhere. The need for chemical management in Korea was realized following the 2012 Gumi hydrofluoric acid accident in 2012. The Chemicals Control Act was enacted in 2015. This system evaluates the risks (high, medium, low) and consequent safety management at all plants that handle hazardous chemical substances. However, the system was criticized as excessive when most plants were designated high-risk without considering their size. Thus, laboratories and hospitals handling very small quantities were subject to regulation. Accordingly, in 2021 Korea revised the system to include off-site consequence analyses and a Korean-style risk analysis. Plants handling very small quantities, such as laboratories and hospitals, were exempt from regulation. In this study, plating and paint manufacturing companies, which were classified as high-risk in the previous system, even though they were medium-size business plants, were re-evaluated as low-risk plants. In the Korean-style risk analysis, it is possible to see at a glance what is lacking in the plants, such as cooperation between local residents and local governments and the construction of safety facilities according to the type of accident scenario. The revised system is a reasonable regulation for medium business plants.

Lift-offs of the sensor could significantly affect the measurement signal and reconstruction of material properties when using the electromagnetic (inductive) eddy current sensor. Previously, various methods (including novel sensor designs, and features like zero-crossing frequency, lift-off point of intercept) have been used for eliminating the measurement error caused by the lift-off distance effect of the sensor. However, these approaches can only be applied for a small range of lift-off variations. In this paper, a linear relationship has been found between the sensor lift-off and ratio of dual-frequency eddy current signals, particularly under the high working dual frequencies. Based on this linear relationship, the lift-off variation can be reconstructed firstly with a small error of 2.5 % when its actual value is up to 10 mm (10.1 % for 20 mm). The reconstructed lift-off is used to further get the property of the material under a low single frequency. Experiments on different ferrous metals have been carried out for the testing of the reconstruction scheme. Since the inductance is more sensitive to the material property (and less sensitive to the lift-off) under low frequencies, the reconstruction error of the material property is much smaller than that of the lift-off, with 1.4 % under 12 mm (and 4.5 % under 20 mm).

Previously, a conductivity invariance phenomena (CIP) has been discovered – at a certain lift-off, the inductance change of the sensor due to a test sample is immune to conductivity variations, i.e. the inductance – lift-off curve passes through a common point at a certain lift-off, termed as conductivity invariance lift-off. However, this conductivity invariance lift-off is fixed for a particular sensor setup, which is not convenient for various sample conditions. In this paper, we propose using two parameters in the coil design – the horizontal and vertical distances between the transmitter and the receiver to control the conductivity invariance lift-off. The relationship between these two parameters and the conductivity invariance lift-off is investigated by simulation and experiments and it has been found that there is an approximate linear relationship between these two parameters and the conductivity invariance lift-off. This is useful for applications where the measurements have restrictions on lift-off, e.g. uneven coating thickness which limits the range of the lift-off of probe during the measurements. Therefore, based on this relationship, it can be easier to adjust the configuration of the probe for a better inspection of the test samples.

In the paper, by virtue of the Faà di Bruno formula, some properties of the Bell polynomials of the second kind, and an inversion formula for the Stirling numbers of the first and second kinds, the authors establish meaningfully and significantly two identities which simplify coefficients in a family of ordinary differential equations associated with higher order Bernoulli numbers of the second kind.

Background: developmental dysplasia of the hip (DDH) is a condition characterized by abnormal hip development in infancy. Early diagnosis allows for effective treatment, while late presentation often necessitates complex surgical interventions. Current recommendations advise screening between the 6th and 8th week postnatal using ultrasound, typically employing the Graf method. However, there's no universal consensus on whether ultrasound screening significantly increases treatment compared to clinical examination-guided ultrasound. This study aims to explore the feasibility of prenatal ultrasound for early identification of DDH risk. Methods: This prospective observational study involved 100 pregnant women undergoing fetal hip ultrasound during the second and third trimesters. Using the modified Graf method, alpha and beta angles were calculated on the fetus. Postnatally, alpha and beta angles were compared with prenatal values. Results: Prenatal ultrasound at 24th week showed inconclusive results because of the difficulty in identification of Graf landmarks, while ultrasound at 34th week has proved to be a reliable and safe method for quantitative determination of alpha and beta angles. Significant correlations were found between prenatal and postnatal alpha and beta angles. Moreover, significant differences in prenatal alpha and beta values were observed in patients developing mature/immature hips postnatally. Conclusions: Prenatal diagnostics show promise for predicting infant hip development. Further research is warranted to validate correlation strength and clinical applicability.

Earthquake-triggered landslides represent a significant seismic-related disaster, posing threats to both the lives and properties of individuals in affected areas. Furthermore, they can result in road and river blockages, as well as other secondary disasters, significantly impacting post-earthquake rescue efforts. Efficient and accurate rapid assessment of high-risk landslide zones carries important implications for decision-making in disaster response and for mitigating potential secondary disasters. This study uses the high-intensity Zone VII to IX of the 5 September 2022 Luding Ms6.8 earthquake as a case study. The "difference method" and the "cumulative displacement method," based on the simple Newmark model, are employed to assess earthquake-triggered landslides. The evaluation results from both methods demonstrate that the areas posing an ex-tremely high risk of earthquake-triggered landslides are predominantly situated on the western side of the Xianshuihe Fault. Actual landslide data verification shows that both models have high predictive accuracy, with the difference method model slightly outper-forming the cumulative displacement method model. Moreover, the study recommends determining threshold values for each landslide hazard interval with significant physical meaning using past strong earthquake data as soon as possible when utilizing the difference method to assess the risk of earthquake-triggered landslides.

The present paper reports an alternative solution of the measurement problem in quantum theory. The measurement problem can be characterized as that the U-procedure verses the R-procedure. The R-procedure is tested by the Yes/No measurement originally proposed by von Neuman and discussed in details by Penrose. We propose a novel stochastic sampling method to tackle the measurement paradox. Each testing sample produces a pair of Yes-number c and No-number d, which in turn generates a sample phase with respect to the exponential form of (c+id). All the sample phases forms a group G_R. Taking G_R as the sampling potential, combined with the dynamic phase group G_U，we establish a unified model of U-procedure and R-procedure for the evolution of wavefunction. Based on the Born rule, the probability of a sample is given by the squared magnitude of （c+id）. Some metaproperties of the new U-R model, such as natural transformation, consistency, and completeness, are presented. The present work provides a new picture of quantum mechanics and alike. The measurement problem widely exists in dynamic analysis, higher cognition, and large data modeling. Thus, the work reported here has a wide range of applications. Keywords: The measurement problem; U-R procedures; the Yes/No type measurement; stochastic sampling; sample phase; Born probability.

The process of water treatment by nanoparticles is one of the most considerable subjects in the cross-field of hydrodynamics, chemistry and mathematics. This paper is dedicated to the case of the flows that appear when squeezing and stretching a spongy with a mix of water with nanoparticles and contaminants. It is assumed that fluid is homogeneous at the starting moment, the parameters of the nanoparticles and contaminants are known, and there is a constant non-homogeneous magnetic field applied to the system. The flow starts moving when the walls of the channel shift to each other. Exact and numerical solutions of the system of ordinary differential equations are used to receive the results. The article gives an answer to the question about stability of the flow and proposes the technique to evaluate the essential characteristics of the system to achieve the treatment process efficiency. The main result is that the considered system shows excellent treatment properties during some part of squeezing stage. This effect does not appear without magnetic field.

We introduce a new class of Vertex Operator Algebras Y+ and their duals, which generalize the standard W-algebras WN of type sl(N). These algebras can be defined in terms of junctions of boundary conditions and interfaces in the GL-twisted N = 4 Super Yang Mills gauge theory. The aim of these technical calculations is to find the relation of these ortho-symplectic Y-algebras to truncations of even W\infinity.

The present study aimed to analyze novel mechanisms underlying Nrf2-mediated anti-apoptosis in periodontal ligament stem cells (PDLSCs) in the periodontitis oxidative microenvironment. We created an oxidative stress model with H2O2-treated PDLSCs. Herein, we used real-time PCR, western blotting, TUNEL staining, fluorogenic assay and transfer genetics to confirm the degree of oxidative stress and apoptosis as well as the Nrf2 function. Surprisingly, we demonstrated that with up-regulated ROS and MDA levels, the effect of oxidative stress was obvious under H2O2 treatment. Anti-oxidative molecules were changed after the H2O2 exposure, whereby the anti-oxidative signaling of Nrf2 was activated with the increase of its downstream effectors, HO-1, NQO1 and γ-GCS. Additionally, the apoptosis levels gradually increased with oxidative stress and changes in the caspase-9, caspase-3, Bax and c-Fos levels, but not with caspase-8 and down-regulated Bcl-2. The enhanced antioxidant effect could not resist the occurrence of apoptosis. Furthermore, Nrf2 overexpression effectively improved the anti-oxidative levels and increased cell proliferation. At the same time, overexpression effectively restrained TUNEL staining and decreased the molecular levels of caspase-9, caspase-3, et al, but not that of caspase-8. By contrast, silencing the expression Nrf2 levels had the opposite effect. Collectively, Nrf2 alleviates PDLSCs via its effects on anti-oxidative and anti-intrinsic apoptosis by the activation of anti-oxidative enzymes.

Recent studies have demonstrated silk fibroin’s ability to extend the shelf life of foods by mitigating the hallmarks of spoilage, namely oxidation and dehydration. Due to the potential for this protein to become more widespread, its safety was evaluated comprehensively. First, a bacterial reverse mutation test (Ames test) was conducted in five bacterial strains. Second, an in vivo erythrocyte test was conducted with Sprague Dawley rats at doses up to 1,000mg/kg-bw/day. Third, a range-finder study was conducted with Sprague Dawley rats at the highest consumption amount given solubility and oral gavage volume constrains (500mg/kg-bw/day). Fourth, a 28-day study in Sprague Dawley rats was conducted at the 500mg/kg-bw/day amount. Fifth, an in vitro pepsin digestion assay was performed to assess the potential for protein allergenicity. Sixth, allergenic potential was further assessed using liquid chromatography-mass spectroscopy for detection of allergenic insect proteins. Seventh, the protein sequences were subjected to bioinformatic analyses. Together, these studies raise no mutagenic, carcinogenic, toxicological, or allergenic concerns with the oral consumption of silk fibroin.

There are unsolved problems related to inflation, gravity, dark matter, dark energy, missing antimatter, and the birth of the universe. Some of them can be better answered by assuming the existence of aether and hypoatoms. Both were created during the inflation in the very early universe. While aether forms vacuum, hypoatoms, composed of both matter and antimatter and believed to be neutrinos, form all observable matter. In vacuum, aether exists between the particle-antiparticle dark matter form and the dark energy form in a dynamic equilibrium: A + A-bar = gamma + gamma. The same reaction stabilizes hypoatoms and generates a 3-dimensional sink flow of aether that causes gravity. Based on the hypoatom structure, the singularity does not exist inside a black hole; the core of the black hole is a hypoatom star or neutrino star. By gaining enough mass, ca. 3 X 10²² M_sun, to exceed neutrino degeneracy pressure, the black hole collapses or annihilates into the singularity, thus turning itself into a white hole or a Big Bang. The universe is anisotropic. Its center, or where the Big Bang happened, is at 0.66^+0.03_-0.01 times the radius of the observable universe at Galactic coordinates (l, b) = (286⁺¹⁰_-10, -43⁺⁷_-6). If we look from the Local Group to the center of the universe, the universe is rotating clockwise.

The development of sustainability, the improvement of the quality of life, and the protection of future generations have become of prime importance in light of climate changes and carbon emissions. Universities are at the top of institutions that should participate in creating an environmentally friendly infrastructure. This study thus aimed to explore the extent to which Saudi universities achieve sustainability in the light of the Saudi Green Initiative from the faculty members’ perspective. Surely, this investigation would produce a proposal to promote sustainability in Saudi universities. A questionnaire consisting of five dimensions, namely academic sustainability, community partnership, resource management, planning and administration, and innovation and leadership was developed and administered to 120 faculty members from five Saudi universities. The participants’ ratings of Saudi universities’ achievement of sustainability dimensions ranged from high to moderate. Based on the results, a proposal was offered to take sustainability in Saudi universities to a higher level.

This chapter aims to construct a relatively complete, universal, and highly reliable road surface state monitoring and perception system through the research of the A1 contact road reconstruction project of an international airport (hereinafter referred to as the “airport”). The system design is based on on-the-spot investigation, theoretical analysis, and engineering practice, using vibrating string type and resistive strain sensors as sensing means, real-time high-frequency signal acquisition technology as the guide, 4G router for wireless communication technology as the media, and storage technology for monitoring system based on server storage terminals. In combination with engineering background, aircraft motion state, main landing gear configuration, sensor selection and evaluation, and other major factors, the actual monitoring information needs of the plane are fully taken into account, as well as the difference in sensor information types, and the system design is carried out by stratification and classification.

Patients with cancer experience insomnia or sleep disturbances. This study aimed to explore whether the discrepancy between a patient's desired time in bed and total sleep time (DBST) index is a measurement tool for insomnia severity or sleep onset latency [SOL] in patients with cancer. This retrospective medical records review study gathered clinical information and rating scale scores including Insomnia Severity Scale (ISI), Cancer-related Dysfunctional Beliefs about Sleep scale (C-DBS), Patient Health Questionnaire-9 items (PHQ-9), State subcategory of State and Trait Anxiety Inventory, and Short form of Fear of Progression Questionnaire. Sleep indices of time variables (bedtime, sleep onset time, and wake-up time), duration variables [SOL, time in bed (TIB), time in bed for 24 hours (TIB/d), and duration from wake-up time to bedtime (WTB)], and the DBST index were calculated. The ISI score was predicted by PHQ-9 (β=0.34, P&lt;0.001), C-DBS (β=0.17, P=0.034), and DBST index (β=0.22, P=0.004) with a significant correlation with the DBST index (r=0.19, p=0.020). The DBST index was significantly correlated with long SOL (r=0.23, P=0.005). Long SOL was predicted by early bedtime (β=0.18, P=0.045), short WTB (β=-0.26, P=0.004), and high DBST index (β=0.19, P=0.013). The DBST index was significantly correlated with a predicting variable each for insomnia severity and SOL in patients with cancer.

Character education is essential for the current millennial generation and must be applied in everyday life in the surrounding community. The character of the millennial generation is different from the previous generation, which requires us to pay more attention to character education which is starting to erode along with the times. The Millennial generation is a generation that in everyday life can never be separated from science and technology. In this digital era, the millennial generation has a social function of strength in technology. In this study, there are research questions that will be discussed in this article, namely the first regarding what problems occur in the millennial generation who occupy the digital era?. Second, what is the important role and influence of the digital era on character education for the millennial generation in Indonesia?. Writing this article uses a qualitative research method, namely a literature review study, where researchers use or look for references from journals or books. Samples of respondents were taken randomly from each region, and there were ten respondents. From this research, it is found that the millennial generation in the digital era chooses to use social media to access the latest news and information rather than reading print media that contains education. This article aims to find out the importance of character education for the millennial generation, which is starting to erode with the times in the digital era. Many people underestimate character education, especially for the current millennial generation. Therefore, we must implement educational programs at any level, especially in Indonesia, because the character shows the national identity. This article will discuss the vital role and influence of character education for millennials who live in the digital era to be aware of the importance of character education in citizenship.

Using pumps operating as turbines (PATs) offers the possibility of increasing the sustainability of water and energy systems by recovering the excess of energy that would be otherwise lost in pressure reducing valves or head loss chambers. In on-grid applications, there are many research works and implementations of PATs. However, there is still limited research for the optimization of efficiency and stability of PATs operating in off-grid systems. This work contributes to the development of stable direct current (DC) off-grid electric systems based on PATs, by optimizing and analysing the energy efficiency and stability for a wide range of operation. A self-excited induction generator (SEIG) coupled to the PAT is provided to cover the conventional type of electric ma-chines typically coupled to the hydraulic pumps. In this context, a methodology is proposed, based on the hydraulic, mechanical and electric subsystems, to define the PAT-SEIG operational area, to maximize energy conversion and the system efficiency. This will guarantee stable electric output quantities when operating in a DC off-grid system. In addition, an analytical model is proposed to estimate the PAT-SEIG operation under specific conditions. With this, water managers are suitable to design and optimize an off-grid PAT-SEIG system and to define the best hydraulic machines, electronic equipment, and all different control elements to maximize energy conversion within the target of operational limits. To develop and verify this new methodology, two micro PAT-SEIG setups were implemented in the hydraulic laboratory of IST/CERIS under typical operating conditions. The proposed solution proved to be resilient under a variable load regime. The system's maximum efficiency can be adapted using different capacitor values for the excitation of the SEIG, and the operational range is limited to the electric components. Considering the nominal efficiencies of the system’s components, the maximum p.u. efficiency obtained for each PAT-SEIG system were between 0.7 and 0.8 p.u.

Tail-sitters aim to combine the advantages of fixed-wing and rotor-craft, but demand a robust and fast stabilization strategy to perform vertical maneuvers and transitions to and from aerodynamic flight. The research conducted in this work intends to assess the performance of nonlinear control strategies to stabilize the attitude of a X-Vert VTOL aircraft when hovering, comparing existing solutions to applications of Nonlinear Dynamics Inversion (NDI) and its incremental version, INDI. Such controllers are implemented and tuned in simulation in order to stabilize a model of the tail-sitter , complemented by estimation methods that allow to feed back the necessary variables. These estimators and controllers are then implemented in a microcontroller, validating them in a Hardware-in-the-Loop (HITL) scenario, with simple maneuvers in vertical flight. Lastly, the developed control solutions are used to stabilize the aircraft in experimental flight, being monitored by a motion capture system. The experimental results allow to validate the model of the X-Vert and compare the effectiveness of the different control solutions in stabilizing it, with the INDI presenting itself as a more robust control strategy, with better tracking capabilities and less actuator demands.