Hyperuricemia (HU), characterized by elevated uric acid (UA) levels in the blood, represents a global health concern associated with various conditions, including cardiovascular diseases, gout, hypertension, metabolic syndrome, renal dysfunction, and neurodegenerative diseases. This review offers a contemporary analysis of HU, encompassing its causes, associated health risks, diagnosis, treatment, and future outlook. Recent studies have underscored the multifaceted origin of HU, implicating genetic predisposition, dietary patterns, lifestyle choices, and environmental influences. Genetic variations affecting enzymes and transporters involved in purine metabolism and UA excretion have been identified, laying the groundwork for personalized treatment strategies. Advances in diagnostic imaging and omics technologies provide enhanced precision in the detection and evaluation of risks. While pharmacological interventions remain central to managing HU, persistent challenges such as treatment resistance prompt exploration of novel drug targets and lifestyle modifications. Chinese herbal medicines offer a potentially alternative approach with fewer side effects. Emerging research on the impact of gut microbiota on UA metabolism opens new therapeutic avenues. Despite progress, challenges such as optimizing treatment duration and understanding long-term effects persist. Collaborative efforts are crucial to address these challenges and advance our comprehension of HU. The integration of precision medicine and holistic patient care approaches holds promise for improving outcomes and enhancing quality of life for individuals with HU.

Falls are considered a significant cause of disability, pain, and premature deaths in older adults, often due to sedentary lifestyles and various risk factors. Combining immersive virtual reality (IVR) with physical exercise, or exergames, enhances motivation and personalizes training, effectively preventing falls by improving strength and balance in older people. IVR technology may increase the ecological validity of the assessments. The main goal of our study was to assess the feasibility of using a KAVE-based VR platform combining simulations of Levadas and a Cable Car to perform a balanced assessment and profiling of the older adult population for high risk-of-falls and the related user experience. A VR-based platform using a Wii balance board and a CAVE was developed to assess balance and physical fitness. Validated by the Biodex Balance System (BBS), 25 older adults participated in this study. The usability and presence were measured through the System Usability Scale and ITC-SOPI questionnaires, respectively. The IVR system showed a high presence and a good usability score of 75. Significant effects were found in the maximum excursion of the Centre of Pressure (COP) on the anterior-posterior axis during the Cable Car Simulation (CCS), correlating with BBS metrics. Multiple discriminative analysis models and the support vector machine classified fall risk with moderate to high accuracy, precision, and recall. The system accurately identified all high-risk participants using the Leave-One-Out method. This study suggests that an IVR-based platform based on simulations with high ecological validity can be used to assess physical fitness and identify individuals at a higher risk of falls.

Seventy-seven percent of Irish primary school children do not meet recommended physical activity (PA) guidelines [1]. The Daily Mile (TDM) is a primary school initiative designed to increase children’s PA output. This study evaluates TDM’s perceived effect on Irish primary school children’s health-related metrics. A mixed-methods study, comprising two data collection phases, used the RE-AIM framework to evaluate TDM [2]. Phase one involved teachers, principals and classroom assistants (n = 191) from TDM-registered schools completing a questionnaire. Two TDM-registered schools participated in phase two where, (i) interviews were conducted with each principal, (ii) a teacher sub-sample (n = 4) participated in a focus group and (iii) a child sub-sample (n = 14) participated in separate focus groups. TDM was perceived to positively impact markers of children’s health, including their PA behaviour, physical fitness and social wellbeing. Inclement weather (66.5%) and a lack of time (56.5%) were reported as the top-ranked implementation barriers. Moreover, TDM’s repetitive nature often left children feeling disinterested and resulted in some teachers modifying the initiative to maintain engagement levels. Maintaining the long-term implementation of TDM and its health benefits in primary schools may require bespoke amendments to the original format to preserve children’s engagement.

The purpose of this qualitative study was to describe parent perceptions of the home exercise pro-gram (HEP) for their infant with congenital muscular torticollis (CMT), and how these perceptions evolved over a physical therapy (PT) plan of care. Twelve participants were recruited from a pediatric PT clinic, and nine completed interviews at three time points. Qualitative description and an iterative approach for thematic analysis of 27 interviews yielded three themes that corresponded to the research questions. The participants’ responses were categorized into three main themes: 1) parents’ perceptions of three key exercises within the HEP; 2) internal and external sources of stress; and 3) sources of empowerment and disempowerment. Regarding the HEP, parents articulated common sentiments for three frequently prescribed exercises for the management of CMT: 1) Tummy time was the fast favorite, 2) ipsilateral cervical rotation was perceived as stressful, and 3) contralateral cervical lateral flexion felt uncomfortable. Additionally, participants disclosed internal and external sources of stress (guilt, uncertainty, and the demands of returning to work) and sources of disempowerment (inconsistent messaging from providers, feeling overwhelmed) and empowerment (being able to see the bigger picture and clear communication and education about the diagnosis) with respect to managing their infant’s CMT. These themes provide insight into the evolution of parent perceptions over a PT plan of care for CMT. Participants’ insights suggest a need for consistent messaging regarding the diagnosis and evidence-based management of CMT, addressing parent stress, and modifying how exercises are taught. This study contributes updated research on parents’ experience with physical therapy and the HEP for their infant’s CMT.

Soil organic matter (SOM) is important for the global carbon cycle, and hyperspectral remote sensing has proven a promising method for fast SOM content estimation. However, soil physical properties significantly affect the sensitivity of satellite hyperspectral imaging to SOM, leading to poor generalization ability of the estimation model. This study aims to improve the spatiotemporal transferability of the SOM prediction model by alleviating the coupling effect of soil physical properties on the spectra. Based on satellite hyperspectral images and soil physical variables, including soil moisture (SM), soil surface roughness (root mean squared height, RMSH), and soil bulk weight (SBW), a soil spectral correction strategy was established based on the information unmixing method. Two important grain-producing areas in Northeast China were selected as study areas to verify the performance and transferability of the spectral correction model and SOM content prediction model. The results showed that soil spectral corrections based on fourth-order polynomials and the XG-Boost algorithm had excellent accuracy and generalization ability, with residual predictive deviations (RPD) exceeding 1.4 in almost all bands. In addition, when the soil spectral correction strategy was adopted, the accuracy of the SOM prediction model and the generalization ability after model migration were significantly improved. The SOM prediction accuracy based on the XG-Boost corrected spectrum was the highest, with a coefficient of determination (R2) of 0.76, root mean square error (RMSE) of 5.74 g/kg, and RPD of 1.68. The prediction accuracy, R2, RMSE, and RPD of the model after migration were 0.72, 6.71 g/kg, and 1.53, respectively. Compared with the direct migration prediction of the model, adopting the soil spectral correction strategy based on fourth-order polynomials and XG-Boost reduced the RMSE of the SOM prediction results by 57.90% and 60.27%, respectively. The performance comparison highlighted the advantages of considering soil physical properties in regional-scale SOM prediction.

Spinal muscular atrophy (SMA) is an orphan disease characterized by progressive degeneration of spinal alpha motor neurons. In recent years, nusinersen and several other drugs have been approved for the treatment of this disease. Transcutaneous spinal cord stimulation (tSCS) modulates spinal neuronal networks, resulting in changes in locomotion and posture in patients with severe spinal cord injury and stroke. We hypothesize that tSCS can activate motor neurons that are intact and restored by medication, slow the decline in motor activity, and contribute to the development of motor skills in SMA patients. Thirty-seven children and adults with SMA types 2 and 3 participated in the study. The median duration of drug treatment was over 20 months. Application of tSCS was performed during physical therapy for 20-40 minutes per day for ~12 days. Outcome measures were specific SMA motor scales, goniometry of contractured joints, forced vital capacity. Significant increases in motor function, improved respiratory function, and decreased contracture were observed in both types 2 and 3 SMA participants. The magnitude of functional changes was not associated with participants age. Further studies are needed to elucidate the reasons for the beneficial effects of spinal cord electrical stimulation in SMA.

Thermaikos Gulf (TG) is a semi-enclosed, river-influenced, marine system situated in the eastern Mediterranean Sea, sustaining both urban coastal regions and ecologically preserved natural areas. Facing a plethora of environmental and anthropogenic pressures, the TG serves as a critical nexus where human activities intersect with marine ecosystems. The second largest city of Greece, Thessaloniki, is located in the northern part of the gulf, while a large environmentally protected zone with multiple river deltas is lying along its western coasts. The quality and health of the TG’s marine environment are tightly linked to the socioeconomic activities of the coastal communities comprising approximately 1.5 million inhabitants. The main features of TG’s environmental dynamics and ecological status have been scrutinized by dedicated research endeavours during the last 50 years. This review synthesizes the seminal findings of these investigations, offering an evaluation of their contribution to research, their present collective impact, and their trajectory toward the future. A severe deterioration of the TG’s environmental quality was detected in the 1970s and 1980s when treatment of urban wastewater was completely absent. A steady trend of recovery was observed after the 1990s, however without achieving, so far, the goal of a “good environmental state”, mandated by national legislation and European directives. The most important research gaps and uncertainties are also discussed and specific recommendations for the improvement of monitoring and understanding about the physical, biochemical, and ecological state of the gulf are provided. The most significant discrepancy is related to the fragmentary monitoring of the TG in both space (partial coverage) and time (temporal gaps), which has been intensified after 2010 due to the reduced funding for environmental research and protection under the severe Greek economic recession. This review aspires to highlight the importance of bolstering monitoring initiatives that can provide continuous observations and further understanding on the TG's ecological and physicochemical conditions. Targeted recommendations, aimed at ameliorating the fragmented monitoring processes, are also provided, advocating for a holistic approach that can safeguard the ecological integrity of the Thermaikos Gulf and uphold its role as a crucial link to marine biodiversity and sustainability in the Mediterranean basin.

Background Popular movement-based injury risk screens have been shown to lack predictive precision, leading to interest in multifactorial models. Furthermore, there is a lack of research regarding injury risk assessment for those currently or planning to be recreationally active. This study aims to provide injury risk insights by analyzing multifactorial injury risk models and as-sociated clinical measures in the U.S. population. Methods Data related to injury, inflammatory markers, physical functioning, body composition, physical activity, and other variables from 21,033 respondents were extracted from NHANES. Odds ratios for self-reported injury were calculated for single predictors and risk models. Case-control and principal component analyses (PCA) were conducted to elucidate confounders and identify risk factor clusters, respectively. Receiver operating characteristic analysis was used to test the precision of a risk factor cluster to identify pain points and functional difficulties. Results Sociodemographic, individual, and lifestyle factors were strongly associated with higher odds of injury. Increases in fibrinogen and C-reactive protein were significantly associated with all risk groups. Membership to the high-risk group (age over 40, obesity, no muscle-strengthening activities, sedentary lifestyle, and low back pain) predicted at least one functional difficulty with 67.4% sensitivity and 87.2% specificity. In the injury group, bone turnover markers were higher, yet confounded by age and there was a significantly higher prevalence of self-reported osteoporosis compared to the control. In males, low testosterone was associated with injury, and higher estradiol was associated with pain and functional difficulties. In females, higher levels of follicle-stimulating hormone were associated with functional difficulties. PCA revealed four high-risk profiles, with markers and activities showing distinct loadings. Conclusion A comprehensive approach to injury risk assessment should consider the nexus of aging, lifestyle, and chronic disease to enhance tailored injury prevention strategies, fostering safe and effective physical activity participation and reducing the burden of musculoskeletal disorders.

This study aimed to evaluate the effects of Blazepod technology when incorporated with various training regimens on the essential elements of physical fitness in volleyball, such as agility, speed, visual response time, and vertical leap. Thirty-six participants (age :17.33±0.48 y, height: 183.78±6.34 cm, weight: 77.14±5.16 kg) were in-volved in this study. In randomized design, three equal groups with two experimental groups and one control group were involved in the study over a period of six weeks: (GE1) used Blazepod technology to workout at a low level; (GE2) used Blazepod technology to workout at a higher intensity; (CG) did not employ Blazepod technology, but it adhered to the same fundamental training curriculum. We conducted agility, speed, reaction time, and vertical jump tests before, midway and after the study to determine optimal training volume, intensity, and frequency. A significant main effect of time (P0.01), and time×group interaction (P>0.001) were found for all tests. Post hoc test showed that the two experimental groups gadget significantly improved in all performance variables (P

Shoulder tendinopathies produce pain and reduce functionality. The aim of this randomized clinical trial was to analyze the effects of Percutaneous electrolysis (PE), Percutaneous peripheral Nerve Stimulation (PNS) and eccentric exercise (EE), on pain (NPRS), strength, electromyographic activity, ultrasound characteristics of the tendon (echogenicity, thickness and hypervascularization) and functionality (DASH and SPADI) on individuals with supraspinatus tendinopathy. Participants (n=50) were divided into two groups, they received 4 treatment sessions, one per week, of PE and PNS (n=25) or 10 treatment sessions of TENS and US (n=25). Both groups performed EE program consisted of 3 sets of 10 repetitions of each of the 3 exercises, twice a day, during the 4 weeks. Follow-up was carried out at 4, 12 and 24 weeks after the start of the intervention. There are statistically significant differences in the analysis between groups (p<0.001) in the post-treatment and follow-up measurements favorable to the PE+PNS+EE treatment on pain (NPRS), strength, supraspinatus electromyographic amplitude, ultrasound characteristics of the tendon (echogenicity, thickness and hypervascularization) and DASH and SPADI questionnaires. The combined treatment PE, PNS and EE is an effective option in the clinical management of tendinopathies, with positive results in the short and long term on the variables studied.

Mangroves offer vital ecological advantages including air and water filtration, coastal and estuarine habitat provision, sediment stabilization, and wave energy absorption. Their intricate root systems play a key role in safeguarding shorelines from tsunamis and erosive storms by dissipating wave energy. Moreover, mangroves shield against boat wakes and wind-waves, bolstering shoreline defense. Wave dissipation is a function of forest width, tree diameter, and forest density. Restoration efforts of juvenile mangroves in Florida’s Indian River Lagoon (IRL) aim to reduce wave energy in areas vulnerable to erosion. Physical model testing of wave dissipation through mangroves is limited due to the complexity in representing the mangrove structure, where prop roots are non-uniform in both diameter and location. Previous studies have quantified wave dissipating effects through use of scaled and parameterized mangrove structures. This study measures the dissipation effects of live mangroves in a wave flume, forced by conditions representative of the IRL. These measurements are used to validate a parameterized dowel model. Error between wave attenuation factors for the live mangrove and dowel system was on average 2.5%. Validation of the modularized dowel system allowed for further parameterized testing to understand forest structure effects, such as sediment stabilization and wave attenuation.

The fifth Industrial revolution (I5.0) prioritizes resilience and sustainability, integrating cognitive cyber-physical systems and advanced technologies to enhance machining processes. Numerous research studies have been conducted to optimize machining operations by identifying and reducing the sources of uncertainty and estimating the optimal cutting parameters. Virtual modeling and Tool Condition Monitoring (TCM) methodologies have been developed to assess the cutting states during machining processes. With a precise estimation of cutting states, the safety margin necessary to deal with the uncertainties can be reduced, resulting in improved process productivity. This paper reviews the recent advances in high-performance machining systems with a focus on the cyber-physical models developed for the cutting operation of difficult-to-cut materials using cemented carbide tools. An overview of the literature and background on the advances in the offline and online process optimization approaches have been presented. Process optimization objectives such as tool life utilization, dynamic stability, enhanced productivity, improved machined part quality, and reduced energy consumption and carbon emissions are independently investigated for the offline and online optimization methods. Addressing the critical objectives and constraints prevalent in industrial applications, the paper explores the challenges and opportunities inherent in developing a robust cyber-physical optimization system

Cancer patients undergoing major interventions face numerous challenges, including the adverse effects of cancer and the side effects of treatment. Cancer rehabilitation is vital in ensuring cancer patients have the support they need to maximise treatment outcomes and minimise treatment-related side effects and symptoms. The Active Together service is a multi-modal rehabilitation service designed to address critical support gaps for cancer patients. The service is located and provided in Sheffield, UK, an area with higher cancer incidence and mortality rates than the national average. The service aligns with local and regional cancer care objectives and aims to improve clinical and quality of life outcomes of cancer patients by using lifestyle behaviour change techniques to address their physical, nutritional, and psychological needs. This paper describes the design and initial implementation of the Active Together service, highlighting its potential to support and benefit cancer patients.

Abstract: Female pelvic floor dysfunction (FPFD) is a series of conditions caused by the displacement or dysfunction of the patient's pelvic organs due to defects, injuries, and deterioration of the pelvic floor supportive structures, with stress urinary incontinence and pelvic organ prolapse being the most common. The mechanism of pelvic floor dysfunction is complex and not yet fully understood, and is often related to one or more functional abnormalities of muscles, connective tissues, fascia, nerves and blood vessels. Specialized clinicians are often unable to cover the comprehensive medical professional information of various specialties such as gynecology and obstetrics, urology, anus and intestines, imaging, etc., and the systematic and comprehensive diagnosis and treatment of the disease will be limited. The application of artificial intelligence concepts in the medical field not only improves the diagnostic efficiency of physicians, but also provides reference and basis for the development of comprehensive treatment programs. This article follows and draws on the diagnosis and treatment process of pelvic floor dysfunction recommended in various guidelines, incorporates physical therapy techniques into the conventional non-surgical treatment of pelvic floor dysfunction, provides guidance for the diagnosis and treatment of pelvic floor dysfunction, and briefly introduces the clinical application and value of pelvic floor intelligent diagnosis and treatment in pelvic floor dysfunction.

A twin-screw extruder was used to fabricate poly(butylene succinate) (PBS)/high density polyethylene (HDPE) blends (7:3 weight ratio) and blend-based nanocomposites. Carbon nanotubes (CNTs), graphene nanoplatelets (GNPs) and organoclays (15A and 30B) served as the nanofiller, while maleated HDPE (PEgMA) acted as an efficient compatibilizer for the blend. In the composites, individual nanofillers were mostly localized in HDPE domains, but some fillers were also observed at PBS-HDPE interfaces. The sea-island morphology of compatibilized blend evolved into a pseudo-co-continuous morphology in the composites. Differential scanning calorimetry results confirmed that PEgMA with HDPE evidently accelerated the crystallization of PBS in the blend. The possible nucleation effect of added fillers on PBS crystallization was obscured by the formation of quasi-connected HDPE domains, causing less PBS nucleation sites. The presence of nanofillers improved the thermal stability and burning anti-dripping behavior of the parent blend. The anti-dripping efficiency of added fillers followed the sequence: CNT>15A>30B>GNP. Rigidity of the blend was increased after formation of nanocomposites. In particular, adding GNP resulted in 31% increase in flexural modulus. Development of a pseudo-network structure in the composites was confirmed by measurement of rheological properties. Electrical resistivity of the blend was reduced by more than 6 orders of magnitude at 3 phr CNT loading, demonstrating the achievement of double percolation morphology.

The study within the current research is focused on theoretical assessment of sustainable aviation fuels (SAF) obtained by blending traditional jet fuels Jet A and different liquids (biodiesel and alcohols) from analytical point of view. Within this paper in-depth analysis ofthe physical-chemical properties of Jet A fuel blended with different biodiesels and alcohols has been performed. Also within the blends Aeroshell 500 oil has been added (5% vol.) for ensuring the lubrication of the turbo engine. The blends consists of: Jet Aaviation fuel + biodieselfrom: palm oil, pork fat, sunflower oil and alcohols: methanol, ethanol and butanol. All the 6 liquids have been blended with Jet A in the following percentages: 10, 20 and 30%. Flash point, kinematic viscosity, density, freezing point, elemental analysis and FTIR analysis have been performed for all the liquids: Aeroshell 500, jet A, jet A + 10, 20, 30% biodiesel from waste palm oil, pork fat and waste sunflower oil, jet A + 10, 20, 30% methanol, ethanol and butanol, biodiesels and alcohols. The obtained results shows the influence of each of the blend’s components on the physical-chemical properties of the blends. Based on the physical-chemical analysis of the blends, conclusions on the behavior of the blends during burning and the gaseous pollutants resulting from the burning process can be drawn.

Having as objective to reach a circular economy, it is important to maximize the Physical Asset’s Life Cycle. The evaluation of Physical Assets Life Cycle may have several approaches which may provide different results. These differences may not be very significant, but must be taken into consideration, because they have consequences in the manager decision. This permits to have a wider time interval to decide when to withdrawal the Physical Asset or to renewal it, and or if this ought to continue functioning because the profits are higher than the expenses, what allows to diminish waste and increase sustainability. These are some aspects that are discussed in this paper, which presents several models to evaluate the Physical Assets Life Cycle, considering the market value, devaluations methods and a more generalized way of Fisher’s Equation, which can include the Risk tax, among others. The results are discussed supported in data for simulation, which are used for each Econometric Model aiming to evaluate the differences among them. In all Models they are considered not only the expenses, namely of Investment and Functioning, but also the Profits, which permit to evaluate the Physical Asset Life Cycle in a holistic way. The models are very versatile, allowing to evaluate quantitatively the changing in the maintenance policies, the energy prices variations, the risk evaluation, the variation of profits according to the real market, and so on. The results demonstrated the robustness of the approach described and that maximize the Physical Assets Life Cycle allowing to minimize the consumption of world resources and, by consequence, it contributes for a more sustainable world.

Diabetes mellitus (DM) is a metabolic disease characterized by chronic hyperglycemia associated with impaired carbohydrate, lipid and protein metabolism, with concomitant absence of insulin secretion or reduced sensitivity to its metabolic effects. Patients with diabetes mellitus have 30% more risk of developing heart failure and cardiovascular disease with respect to healthy people. Heart and cardiovascular problems are the first cause of death worldwide and the main complications which lead to high healthcare costs. Such complications can be delayed or avoided by taking prescribed medications in conjunction with a healthy lifestyle (i.e. diet and physical activity). The American College of Sports Medicine and the American Diabetes Association recommend that diabetic people reduce total sedentary time by incorporating physical activity in their weekly routine. This narrative literature review has the aim to summarize and present the main guidelines, pre-exercise cardiovascular screening recommendations, and considerations for patients with diabetes and comorbidities who are planning to participate in regular exercise regimens.

Technical sectors are an inseparable and elementary part of a critical infrastructure (CI) complex system. The services they provide are essential to the functioning of all the dependent sectors of CI on whose services society depends, especially in areas with high levels of urbanisation. The starting point for effective CI elements protection of is permanent assessing and strengthening their resilience to the negative effects of internal and external threats. Current perceptions of resilience focus primarily on repressive components responsive to incident (i.e., robustness, recoverability, and adaptability), while little attention is paid to preventative components. Therefore, the benefit of the article is to define resistance which could be seen as the CI element ability or characteristic to prevent the occurrence of incidents. Based on that, the article defines 1) the individual factors (variables and parameters) determining the CI resistance and 2) the methodological procedure for infrastructure elements resistance assessment in order to identify weak points and subsequently strengthen them. The essence of the article is defining the starting points for extending the CIERA method by a component strengthening the critical infrastructure resilience in the prevention phase. A practical example of resistance assessment for a selected critical energy infrastructure element is presented at the end of the article.

Steady-state one-dimensional flows of five-component air behind a normal shock wave are considered with one-temperature model. A mathematical model is formulated to describe the relaxation of a five-component air mixture with a one-temperature non-equilibrium approximation. A numerical study of non-equilibrium flows of a reacting five-component air mixture behind shock waves at different heights and velocities of free flow is performed. The contribution of different types of reactions to the overall relaxation of the mixture is discussed, and the distributions of macro-parameters of the flow behind the shock wave front are calculated. The lengths of the relaxation zones behind the shock wave front are compared at different initial conditions.

The positional deviation of the Automatic Emergency Call System (AECS) under collision conditions brings difficulties for post-rescue operations. Currently, there is a lack of analysis on the system operating conditions during collisions in the reliability assessment methods for the Global Navigation Satellite System (GNSS) deployed in AECS. Therefore, this paper establishes an in-vehicle collision environment simulation model for emergency calls to explore the influence of parameters such as temperature and vibration on the data deviation of the simulated GNSS system. We also propose environmental limits applicable to comprehensive AECS tests, which can objec-tively evaluate the reliability of AECS and provide data support for AECS bench test. Through the satellite signal-based semi-physical simulation, AECS is subjected to bench test under different operating conditions. The findings of this study demonstrate that the occurrence of random vibra-tion and impact stress, induced by vibration, exerts considerable disruptive effects on positional signal data during collisions. Consequently, it leads to substantial interference with the accurate detection of post-collision satellite positioning information. When the simulation operates under a 2.4gRMS vibration condition, the maximum phase noise error in the positioning system is 8.95%, which does not meet the AECS test accuracy requirements. On the other hand, the semi-simulation system is less affected by temperature changes, and at the maximum allowable temperature dif-ference of the equipment, the maximum phase noise error in the simulated signal is 2.12%. Therefore, based on the influence of phase noise variation on the accuracy of satellite signal simulation, nec-essary environmental conditions for AECS test are obtained, including the temperature consistent with the maximum operating temperature of the vector generator and the vibration Power Spectral Density (PSD) lower than 1.2gRMS.

Background: The validation of measuring instruments in health is a requirement to be able to use them safely and reliably. The Short Physical Performance Battery (SPPB) tool is an instrument widely used in the clinic and validated in numerous countries and languages and for different populations. The objective of this research was to determine the psychometric properties of SPPB for a sample composed of institutionalized Spanish older adults. Methods: Multicenter study of the psychometric properties of the Short Physical Performance Battery tool with a convenience sample of 194 institutionalized older adults. Reliability (internal consistency), validity (construct validity and convergent validity) tests were performed. Results: The results show a very good internal consistency, construct validity and convergent validity. In addition, the factorial structure of the SPPB is provided, which reflects that it is a unidimensional scale. Conclusions: In conclusion, the Short Physical Performance Battery is a valid and reliable tool for use with institutionalized older adults. Its use is recommended as part of the Comprehensive Geriatric Assessment for the evaluation of the physical or functional sphere. Authors should include one of the following statements about the registration status of the manuscript here: This study was prospectively registered and approved by the Ethics Committee of the University of Burgos (IR 11/2018).

This work deals with finding out whether the heart rate values of operators of forwarding machines during the work shift are influenced by the individual activities that the operator has to perform during timber skidding, or by the operators themselves. Furthermore, the work deals with determining the difficulty of individual activities in terms of physical load. For this purpose, the work shift of operators carrying out timber skidding was divided into individual activities: Driving, Maintenance, Forwarding, Break. During these work activities, the heart rate of each operator was taken for subsequent evaluation. The results show that the highest pulse rates of the operators were achieved during the Maintenance of the entrusted machine, while the highest pulse fluctuations in the operators were recorded during Forwarding. As part of this activity, the highest heart rate of the entire measurement process was recorded (132.0000 bpm), but also the lowest (42.0000 bpm). Furthermore, it was proven that both the operator and the activity he performs affect the pulse rate. The activities themselves did not differ from each other in only one of the six cases of comparison. Specifically, it was Driving and Forwarding.

Abstract- Cognitive radio (CR) play an important role in improving spectral efficiency (SE) of wireless communication, meanwhile, intelligent reflecting surface (IRS) is an effective technology to improve the secrecy performance of wireless communication system by adjusting the phase shift and amplitude of channel. Thus, we consider an IRS-aided multiple-input single-output (MISO) CR systems to enhance secrecy rate, which is consists of a single eavesdropping link, a primary network containing the primary receiver (PR), and secondary network including secondary receiver (SR) and the SR transmitter (SR-TX). Specifically, we minimize the transmit power of SR subject to secrecy capacity constraint and interference temperature (IT) constraint on PR, by jointly optimizing the beamforming vector and artificial noise (AN) constraints matrix at SR-TX as well as the phase shift matrix of IRS. Numerical results show that the different values of transmit antennas at the SR-TX and the number of IRS elements can significantly decrease the transmit power under the condition of ensuring secure communication.

The health equipment are used to keep track of significant health indicators, automate health interventions, and analyze health indicators. People have begun using mobile applications to track health characteristics and medical demands because all devices are linked to high-speed internet and phones. Such a combination of smart devices, the internet, and mobile applications expands the usage of remote health monitoring through the Internet of Medical Things (IoMT). The accessibility and unpredictable aspects of IoMT create massive security and confidentiality threats in IoMT systems. In this proposed paper - Octopus, Physically Unclonable Functions (PUFs) have been used to provide privacy to the healthcare device by masking the data, and machine learning (ML) technique is used to retrieve the health data back and for reducing security breaches on networks. This technique has exhibited 99.45% accuracy, which proves that this technique could be used to secure health data with masking.

The covid-19 pandemic has generated substantial changes in the lives of the population, such as increased physical inactivity, which can lead to overweight and, consequently, repercussions on glucose homeostasis. A population-based household epidemiological survey was conducted by stratified, multistage probability cluster sampling (October and December 2020) in Brazil. Participants were classified as physically active or inactive during leisure time according to the recommendations of the World Health Organization. HbA1c levels were categorized as normal (≤6.4%) or with glycemic changes (≥ 6.5%). The mediating variable was excess weight (overweight and obese). Multivariate logistic regression analyzes were performed to examine the association between physical inactivity and glycemic changes. Mediation was analyzed using the Karlson–Holm–Breen method to verify the influence of excess weight on the association. We interviewed 1,685 individuals, mostly women (52.4%), 35–59 years old (45.8%), race/ethnicity brown (48.1%), and excess weight (56.5%). The mean HbA1c was 5.68% (95% CI: 5.58-5.77). Individuals physically inactive were 2.62 times more likely to have glycemic alterations (OR:2.62.95% CI:1.29-5.33), and 26.87% of this association was mediated by excess weight (OR:1.30:95% CI:1.06-1.57). Physical inactivity in leisure time increases the chances of glycemic alterations, and part of this association can be explained by excess weight.

Application of the Ramsey graph theory to the analysis of physical systems is reported. Physical interactions may be very generally classified as attractive and repulsive. This classification creates the premises for the application of the Ramsey theory to the analysis of physical systems built of electrical charges, electric and magnetic dipoles. The notions of mathematical logic, such as transitivity and intransitivity relations, become crucial for understanding of the behavior of physical systems. The Ramsey theory explains why nature prefers cubic lattices over hexagonal ones for systems built of electric or magnetic dipoles. The Ramsey approach may be applied to the analysis of mechanical systems when actual and virtual paths between the states in the configurational space are considered. Irreversible mechanical and thermodynamic processes are seen within the reported approach as directed graphs. Chains of irreversible processes appear as transitive tournaments. These tournaments are acyclic; the transitive tournaments necessarily contain the Hamiltonian path. The set of states in the phase space of the physical system, between which irreversible processes are possible, is considered. The Hamiltonian path of the tournament emerging from the graph uniting these states is a relativistic invariant. Applications of the Ramsey theory to the general relativity become possible when the discrete changes in the metric tensor are assumed. Reconsideration of the concept of “simultaneity” within the Ramsey approach is reported.

The endometrium is an important part of the uterus. The human endometrium is a complex and dynamic tissue that goes through phases of growth and regression during any menstrual cycle. A thin endometrium might be relevant to a lower rate of implantation as well as a higher rate of miscarriage. Several treatments have been developed for thin endometrium, such as granulocyte colony-stimulating factor, stem cell therapy, acupuncture and physical therapy, among others. These approaches have been shown to have effects on the endometrium related to reducing the area of fibrosis, increasing the number of glands, promoting angiogenesis, increasing endometrial thickness, improving tissue structure, and increasing pregnancy rates. This review summarizes the key role of these treatments in repairing thin endometrium and improving clinical pregnancy rates

The paper presents a new conception of quasi-distributed sensor for simultaneous measurement of several physical fields and the results of an experimental study of this sensor. A distinctive feature of the sensor defined by the sensitive RC elements connected in the original tree-like structure. The proposed is the structure of the sensor and measurement system as well as corresponding measurement algorithm. The high accuracy demonstrated by the sensor’s prototype gives possibility to effective use the proposed sensors in many technical and scientific applications.

This paper presents a modular approach to generic exergame design that combines custom physical exercises in a meaningful and motivating story. This aims to provide a tool that can be individually tailored and adapted to people with different needs, making it applicable to different diseases and states of disease. The game is based on motion capturing and integrates four example exercises that can be configured via our therapeutic web platform "Blexer-med". To prove the feasibility for a wide range of different users, evaluation tests were performed on 14 patients with various types and degrees of neuromuscular disorders, classified into three groups based on strength and autonomy. Users were free to choose their schedule and frequency. Game scores and three surveys (before, during, and after the intervention) showed similar experiences for all groups, with the most vulnerable having the most fun and satisfaction. The players were motivated by the story and by achieving high scores. The average usage time was 2.5 times per week, 20 minutes per session. Pure exercise time was about half the game time. The concept has proven feasible and forms a reasonable basis for further developments. The full 3D exercise needs further fine-tuning to enhance fun and motivation.

Hazelnut is a widespread nut species, especially in Europe, that can be consumed raw or roasted, due to its pleasant taste and nutritional properties. Despite the renowned beneficial properties, hazelnuts contain several proteins capable of inducing food allergy in sensitized individuals such as Cor a 2 (profilin), Cor a 8 (lipid transfer protein), Cor a 9 (11S seed storage globulin, legumin-like) and Cor a 11 (7S seed storage globulin, vicilin-like). In the present paper we investigated the effectiveness of autoclave based treatments in decreasing the allergic potential of hazelnut as also assessed by submitting the treated material to in vivo skin prick test and to in vitro immunoblot analysis with sera of allergic individuals exposed to the treated food material. This preliminary analysis shows that autoclave treatment, preceded by hydration and/or followed by drying, seems to be a promising approach and appears to be effective in reducing the allergenicity of hazelnut in most patients, probably due to the denaturation of most major and minor allergenic proteins. This work will open to the opportunity to produce, in perspective, hypoallergenic hazelnut derivatives tolerated by the allergic subjects.

We apply a well known technique of theoretical physics, known as Geometric Algebra or Clifford algebra, to linear electrical circuits with non-sinusoidal voltages and currents. We rederive from the first principles the Geometric Algebra approach to the apparent power decomposition. The important new point consists in a choice of a natural convenient basis in the Clifford vector space which simplifies considerably the presentation. Thus we are able to derive a number of general results which are missing in the former papers. In particular, a natural correspondence with the Current Physical Components approach is shown.

The efficacy of the product development process is measured by the ability to launch a project with product and production process specifications that could guarantee that the manufacturing can produce it with the least impact. If a problem is detected late, they bring consequences beyond the high cost of the solution, if related to physical ergonomics, which will influence the well-being of operators, productivity, and quality. Virtual Reality (VR) and Digital Human Modeling (DHM) are ones of the enabling technologies of Industry 4.0 and has already been applied on a large scale in industries such as automotive, construction, and aeronautics. However, even though the huge applications, these technologies are not yet applied by these industries for the analysis of physical ergonomics during product development phases. This study aims to characterize the state of the art and technology about the application of Virtual Reality and Digital Human Modeling for the physical ergonomics analysis in the during product development phases in the industry through a systematic review of the literature and patents. In patent documents recovery, we used Derwent Innovation database. The research is based on searching the selected terms in the title, summary, and claims of the documents through a search strategy containing IPC code and keywords. In articles recovery, we searched ScienceDirect, Springer, and IEEExplore databases for scientific publications. The search resulted in 311 patents documents and 16 articles in the scientific database. This study analyzed the patents to map out the technological progress in this area, where we found in the charts and data an increasing number of publications per year and a spread application with a considerable number of new technologies presented in these recent patents. The literature review indicated that Virtual Reality technology complements the Digital Human Modeling during physical ergonomics analysis for manufacturing process already designed. The majority of research on the use of VR and DHM technologies for physical ergonomics analysis focus on the automotive industry and the ergonomic assessment of workstations and current processes. Further research is needed to investigate how Virtual Reality and Digital Human Modeling might assist in the understanding of physical ergonomics in certain tasks throughout the product development process, such as the simulation of worker posture or effort when assembling parts.

The aim of this study was to determine gender differences in the level of motor skills and effects of a multi-year exercise program on the level of motor skills in 161 preschool children (5-6 yo). Patricipants were deployed into one control and three experimental groups. Motor skills were assessed with the Bruininks-Oseretsky Test of Motor Proficiency (BOT-2). To determine difference in scores for each BOT-2 tests between control and experimental groups, one-way ANOVA was used for girls and boys separately while two-way ANOVA was employed to determine difference between the gender in the overall BOT-2 score. The results indicates that one-year multilateral exercise program has a positive effect on the level of motor skills in preschool children. Interestingly, additional years of participation in exercise program yielded in maintenance of acquired motor skills level. Also, exercise program affected more girls than preschool boys considering both individual and composite BOT-2 scores. According to the findings of this study, presented exercise program could have potential benefits on multilateral development of the motor skills in preschool children which could facilitate balance of locomotor and manipulative skills. Therefore, integration of multilateral program intended for preschool children could be considered for implementation within the kindergarten curriculum.

Wrist-worn fitness trackers and smartwatches are proliferating with an incessant attention towards health tracking. Given the growing popularity of wrist-worn devices across all age groups, a rigorous evaluation for recognizing hallmark measures of physical activities and estimating energy expenditure is needed to compare their accuracy across the lifespan. The goal of the study was to build machine learning models to recognize physical activity type (sedentary, locomotion, and lifestyle) and intensity (low, light, and moderate), identify individual physical activities, and estimate energy expenditure. The primary aim of this study was to build and compare models for different age groups: young [20-50 years], middle (50-70 years], and old (70-89 years]. Participants (n = 253, 62% women, aged 20-89 years old) performed a battery of 33 daily activities in a standardized laboratory setting while wearing a portable metabolic unit to measure energy expenditure that was used to gauge metabolic intensity. Tri-axial accelerometer collected data at 80-100 Hz from the right wrist that was processed for 49 features. Results from random forests algorithm were quite accurate in recognizing physical activity type, the F1-Score range across age groups was: sedentary [0.955 – 0.973], locomotion [0.942 – 0.964], and lifestyle [0.913 – 0.949]. Recognizing physical activity intensity resulted in lower performance, the F1-Score range across age groups was: sedentary [0.919 – 0.947], light [0.813 – 0.828], and moderate [0.846 – 0.875]. The root mean square error range was [0.835 – 1.009] for the estimation of energy expenditure. The F1-Score range for recognizing individual physical activities was [0.263 – 0.784]. Performances were relatively similar and the accelerometer data features were ranked similarly between age groups. In conclusion, data features derived from wrist worn accelerometers lead to high-moderate accuracy estimating physical activity type, intensity and energy expenditure and are robust to potential age-differences.

We are witnessing a progressive divestment of some institutions with strong traditions and skills in physical modelling and their consequent impoverishment, to the detriment of numerical modelling. For many reasons, the economic imperatives and the exponential growth of computational means and numerical methods should certainly not be excluded. In this work, we aimed to highlight the new requirements of the recent sophisticated developments in physical modelling, precisely due to the new needs imposed on them by mathematical and numerical modelling and the growing risks in civil construction works. In this context, reflections are reported, justified by scientific and real-world examples, on the need for maintenance and reinforcement of investments in physical modelling, both to support the scientific community and to design buildings of significant economic, social and environmental impact.

Abstract The aim of this research is to conduct a systematic review analysing the role of the physiotherapy interventions in palliative care. PRISMA as a critical appraisal tool was utilised for the selection of the research articles. The inclusion criteria were based on the year of publication, ease of availability, language, geographical location, and study type. To ensure the credibility, databases such as Elsevier, Proquest, and EBSCO Host were used to filter the grey content. Data published in the past ten years (2009-onwards) was only included to ensure the selection of the most recent interventions used by the physiotherapists. A total of 11 articles were selected which determined that physiotherapy interventions involving breathing exercises, aerobic exercises, manual therapies, and educational awareness were critical to promoting the functional capability and empower the patients.

Through the Internet of Things (IoT) the internet scope is established by the aid of physical objects integration to classify themselves to mutual things. A physical object can be created by this inventive perception to signify itself in the digital world. Regarding the physical objects that are related to the internet, it is worth to mention that considering numerous theories and upcoming predictions, they mostly require protected structures, moreover, they are at risk of several attacks. IoTs are endangered by particular routing disobedience called physical layer attack owing to their distributed features. The physical layer attack as a security warning makes possible for the invader to abuse the resources and bandwidth of the network through overloading the network via unimportant packets. This protocol is called LSFA-IoT consisting of two key sections of the physical layer detection system and misbehavior detection system. The first section is utilized in stabilizing the status of the network. The second section is in charge of discovering the misbehavior sources within the IoT network through , the Average Packet Transmission RREQ. By detecting a malicious node, the status of the node is checked by LSFA-IoT prior to sending a data packet and in case detecting the node as malicious, no packet is sent to that node and that node is added to the detention list. Here, the technique is assessed through wide simulations performed within the NS-3 environment. Based on the results of the simulation, it is indicated that the IoT network behaviour metrics are enhanced based on the detection rate, false-negative rate, false-positive rate, and packet delivery rate.

With proper processing and utilization, biofortified cassava may contribute to the nutritional status of the consumers, thus, the need for this study. High-quality cassava flour from white- (TME 419) and biofortified (TMS 01/1368) cassava varieties were produced at a commercial processing factory, after which the flour is composite with wheat flour to produce bread. The nutritional composition, physical properties and sensory quality of the composite bread were analyzed using standard methods. Results showed that composite bread from 20% biofortified cassava flour (20-YCF) had a higher value of total β-carotene (0.74 μg/g), moisture (37.83%) and ash (2.29%) contents. The fat (3.72%) and protein (12.83%) contents were higher in 20% white cassava flour (20-WCF) composite bread. The 20-YCF composite bread had the highest loaf volume (3286.2 cm3), elasticity (6.32), chewiness (40.51 N) and gumminess (6.41), 20-WCF composite bread had higher specific volume (3.59 cm3/g) and hardness (176.50 N). The 100% wheat bread had higher cohesiveness (0.10) and loaf weight (932.35 g). A significant negative correlation (r = - 0.98, p≤0.05) exist between bread hardness and protein content. The composite bread compared favourably with the 100% wheat bread in terms of weight and aroma, but, the 100% wheat bread was more acceptable.

We have shown that the use of evolutionary gravitational constants G, the speed of light c, and cosmological constant Λ in the Einstein’s field equations leads to a very simple model that fits the supernovae Ia data with a single parameter as well as the standard ΛCDM model with two parameters, and has the predictive capability superior to the latter. We have shown that at the current time G and c both increase as dG/dt = 5.4GH₀ and dc/dt = 1.8cH₀ with H₀ as the Hubble constant, and Λ decreases as dΛ/dt = −1.2ΛH₀. Negative finding on the variation of G with time derived from the analysis of lunar laser ranging data in several studies has been attributed to the fact that these studies did not consider the variation of c simultaneously with G.

We have developed a cosmological model by allowing the speed of light c, gravitational constant G and cosmological constant Λ in the Einstein filed equation to vary in time, and solved them for Robertson-Walker metric. Assuming the universe is flat and matter dominant at present, we obtain a simple model that can fit the supernovae 1a data with a single parameter almost as well as the standard ΛCDM model with two parameters, and has the predictive capability superior to the latter. The model, together with the null results for the variation of G from the analysis of lunar laser ranging data determines that at the current time G and c both increase as dG/dt = 5.4GH0 and dc/dt = 1.8cH0 with H0 as the Hubble constant, and Λ decreases as dΛ/dt = -1.2ΛH0. This variation of G and c is all what is needed to account for the Pioneer anomaly, the anomalous secular increase of the Moon eccentricity, and the anomalous secular increase of the astronomical unit. We also show that the Planck’s constant ħ increases as dħ/dt = 1.8ħH0 and the ratio D of any Hubble unit to the corresponding Planck units increases as dD/dt = 1.5DH0. We have shown that it is essential to consider the variation of all the physical constants that may be involved directly or indirectly in a measurement rather than only the one whose variation is being considered.

Migrants are mainly employed in "3D Jobs" dirty, dangerous, difficult, characterized by monotony, intense rhythms, in sectors at higher risk as construction, heavy industry, agriculture. Aim of this study is to elaborate a systematic review, in order to identify the main occupational risks and occupational diseases of this category. Research included articles published from 2013 to 2018 on the major online databases (PubMed, Cochrane Library and Scopus), using a combination of some keywords (migrant workers, expatriates, physical health, diseases, illnesses, travel, travelers, work and occupational). The online search indicated 1.109 references. We excluded 977 studies, because unrelated to physical health and 64 due to duplication. They were analyzed 68 articles, including 6 reviews and 62 original article. The main risk emerged are to developing infectious diseases, metabolic cardiovascular diseases and to manifesting a lower quality of life, in particular due to difficulties in accessing local health services. It will be crucial to implement the role of occupational medicine in order to introduce multilevel interventions designed to prevent work-related injuries and illnesses and to promote healthier working environments.

Physical frailty and sarcopenia (PF&S) are hallmarks of aging that share a common pathogenic background. Perturbations in protein/amino acid metabolism may play a role in the development of PF&S. In this preliminary study, 68 community-dwellers aged 70 years and older, 38 with PF&S and 30 non-sarcopenic, non-frail controls (nonPF&S), were enrolled. A panel of 37 serum amino acids and derivatives was assayed by UPLC-MS. Partial Least Squares Discriminant Analysis (PLS-DA) was used to characterize the amino acid profile of PF&S. The optimal complexity of the PLS-DA model was found to be three latent variables. The proportion of correct classification was 76.6 ± 3.9% (75.1 ± 4.6% for enrollees with PF&S; 78.5 ± 6.0% for controls). Older adults with PF&S were characterized by higher levels of asparagine, aspartic acid, citrulline, ethanolamine, glutamic acid, sarcosine, and taurine. The profile of nonPF&S individuals was defined by higher levels of α-aminobutyric acid and methionine. Distinct profiles of circulating amino acids and derivatives characterize older individuals with PF&S. The dissection of these patterns may provide novel insights into the role played by protein/amino acid perturbations in the disabling cascade and possible new targets for interventions.

The article presents a cyber-physical system for acquiring, processing and reconstructing images from measurement data. The technology was based on process tomography, intelligent measurement sensors, machine learning, Big Data, Cloud Computing, Internet of Things as a solution for Industry 4.0. Industrial tomography enables observation of physical and chemical phenomena without the need of internal penetration and allows real-time monitoring of production processes. The application includes specialized intelligent devices for tomographic measurements and dedicated algorithms for solving the inverse problem. The work focuses mainly on electrical tomography and image reconstruction using deterministic methods and machine learning, the reconstruction results were compared, different measurement models were used. The researches were carried out for synthetic data and laboratory measurements. The main advantage of the proposed system is the possibility of spatial data analysis and their high processing speed. The presented research results show that the process tomography gives the possibility to analyse the processes taking place inside the facility without disturbing the production, analysis and detection of obstacles, defects and various anomalies. Knowing the characteristics of a given solution, the application allows you to choose the appropriate method to reconstruct the image.

Although fragility fractures, osteoporosis, sarcopenia and frailty are becoming more prevalent in our aging society the treatment options are limited and preventative strategies are needed. Despite magnesium being integral bone and muscle physiology the relationship between dietary magnesium and skeletal muscle and bone health has not been investigated concurrently before. We analysed cross-sectional associations between dietary magnesium and skeletal muscle mass (as fat free mass – FFM), grip strength and bone density (BMD) in 156,575 men and women aged 39-72 years from the UK Biobank cohort. FFM was measured with bioelectrical impedance and expressed as the percentage of body weight (FFM%) or divided by body mass index (FFM_BMI). Adjusted mean grip strength, FFM%, FFM_BMI, and BMD were calculated according quintiles of dietary magnesium, correcting for covariates. Significant inter-quintile differences across intakes of magnesium existed in men and women respectively of 1.1% and 2.4% for grip strength, 3.0% and 3.6% for FFM%, 5.1% and 5.5% for FFM_BMI, and 2.9% and 0.9% for BMD. These associations are as great or greater than annual measured losses of these musculoskeletal outcomes indicating potential clinical significance. Our study suggests that dietary magnesium may play a role in musculoskeletal health and have relevance for population prevention strategies for sarcopenia, osteoporosis and fractures.

Cartoons in the era of digital media are among the most prevalent medium of entertainment for the children, parents also encourage them to view such contents to engage the children which make an area need to be explained exhaustively by adopting new approaches. There are lot of studies in the past conducted to explain the impacts of the cartoons on the children however, it is remarkable fact that there is lack of the studies in the literature which directly address the observation about the above mentioned impacts in view of the teacher’s. This study deals with the educational, emotional, behavioral and Religious etc. impacts of cartoons on kids in view of teachers of the primary schools as they are considered as the one who can observer these impacts in a profound way. of the of Multan. Different areas of impacts have been analyzed in this study by using survey technique and analysis is conducted and presented in the teacher’s views in this study to examine what they feel that how cartoons are effecting the personalities of the children.

Background/Objectives: Venous ulcers is the most common complication of all ulcers of the lower limbs that occurs in patients with chronic venous insufficiency. The treatment of venous ulcers is multidisciplinary, with physiotherapy intervention serving as an adjuvant therapy in the management of these wounds. This study aims to investigate physiotherapeutic interventions for the management of venous ulcers; Methods: Exploratory and descriptive study using the Delphi method. The interventions were derived from a systematic review of the literature and presented to a panel of experts for evaluation. The panel comprised 12 experts in wound care, and two rounds of analysis were conducted. A quantitative analysis was performed to assess the level of agreement in responses, while qualitative analysis was applied to the experts' comments; Results: In the first round, the consensus varied between 80% to 100% within the answers, and in the second round it ranged from 83,3% to 100%. In the second round, all interventions obtained at least 80% consensus. The intervention includes the use of compression therapy and therapeutic exercise: resistance training, aerobic exercise, stretching, balance training, and the use of a vibrating platform. Conclusions: Physiotherapy can help as an adjuvant therapy to a specific local treatment of venous ulcers. The main intervention includes therapeutic exercise and the use of compression therapy.

The study focused on utilizing post-process osmotic solution enriched with inulin or maltodextrin, evaluating its potential for spray drying. Parameters such as yield, energy consumption, and the physical properties of the dried solutions and powders—including moisture content (Mc), water activity (Aw), color, true and bulk density, porosity, and glass transition temperature—were analyzed. The effects of carrier type, concentration, and inlet temperature (Tin) were systematically examined. Samples dried with maltodextrin demonstrated over 50% higher yield than those with inulin, with the highest yield of 32.13±0.64% and the lowest yield of 2.75±0.48%. Higher Tin improved drying efficiency by reducing Mc but also caused darker powders. Energy consumption increased with rising Tin, peaking at 2295±51 kJ. The Spray Drying Energy Index (SDEI) was introduced to assess energy consumption relative to powder yield, with the most favorable SDEI values observed for processes with the highest total energy consumption. These same samples exhibited lower Mc and Aw values. The lowest bulk density was 0.455±0.004 g·cm-3, while porosity was 58.3±0.7%. The results highlight the potential of spray drying as a sustainable method for utilizing by-products from osmotic dehydration, aligning with the principles of sustainable food practices.

In this research, we investigate the integration of an Intrusion Detection System (IDS) with a Digital Twin (DT) to enhance the cybersecurity of physical devices in cyber-physical systems. Using Eclipse Ditto as the DT platform and Snort as the IDS, we developed a near-realistic test environment that included a Raspberry Pi as the physical device and a Kali Linux virtual machine to perform common cyberattacks such as Hping3 flood attacks and NMAP reconnaissance scans. The results demonstrated that the IDS effectively detected Hping3-based flood attacks but showed limitations in identifying NMAP scans, suggesting areas for IDS configuration improvements. Furthermore, the study uncovered significant system resource impacts, including high CPU usage during SYN and ACK flood attacks and persistent memory usage after NMAP scans, highlighting the need for enhanced recovery mechanisms. This research presents a novel approach by coupling a Digital Twin with an IDS, enabling real-time monitoring and providing a dual perspective on both system performance and security. The integration offers a holistic method for identifying vulnerabilities and understanding resource impacts during cyberattacks. The work contributes new insights into the use of Digital Twins for cybersecurity and paves the way for further research into automated defense mechanisms, real-world validation of the proposed model, and the incorporation of additional attack scenarios. The results suggest that this combined approach holds significant promise for enhancing the security and resilience of IoT devices and other cyber-physical systems.

Anxiety disorders significantly reduce patients' quality of life. Current pharmacological treatments, primarily benzodiazepines and antidepressants, are associated with numerous side effects. Consequently, there is a continual search for alternative methods to traditional therapies that are less burdensome for patients and broaden their therapeutic options. In this review, we examined recent evidence on alternative treatments for anxiety disorders, including physical activity, mindfulness, VR technology, biofeedback, herbal remedies, and transcranial magnetic stimulation (TMS), cryotherapy, hyperbaric therapy, vagus nerve stimulation, MDMA, electroconvulsive therapy (ECT), and eye movement desensitization and reprocessing (EMDR) therapy. Our objective was to determine the role of these selected alternative methods in the treatment of anxiety disorders. Alternative treatments significantly expand the options available to patients and clinicians, with many serving as adjuncts to traditional therapies. Among the methods presented, mindfulness has the most significant therapeutic potential.

The rapid development of the Industrial Internet of Things (IIoT) has brought enormous opportunities to the industrial environment but has also posed significant challenges to network security, especially the physical layer security challenges,which is crucial for the reliable transmission of messages interconnected devices and sensors. Focus on the enhancing the physical layer security in the IIoT communication, this paper proposed a mechanism of Spatial Secrecy Outage Probability (SSOP) to ensure the secure transmission of data. The SSOP algorithm assumes that the location of legitimate device is known, while eavesdropper on the random distribution of device locations, forming the SSOP model related to device locations from the perspective of insecure regions (ISR) and secure regions (SR), and deduce the closed-form expression for its upper bound. Subsequently under the constraint of SSOP conditions, establish an optimization model with the objective of system throughput maximization based on Spatial Secrecy Outage Probability(SRM-SSOP). By optimizing the transmission rate of legitimate channels or controlling the transmission power, the maximization of system throughput can be achieved, thus reducing the consumption of communication resources. Through sophisticated modeling and simulation in the MATLAB, we verified the accuracy of the definition and derived upper bound of SSOP. The experimental results also show that SSOP algorithm gradually converges to a specific value as the number of antenna elements increases. In addition, we observed that when the receiver device is aligned with the normal direction of the transmit antenna array, the SSOP reaches a minimum value. These performance are crucial for understanding and optimizing the security performance of IIoT communication systems.

The cyber physical systems of smart cities are facing increasingly severe attack situations, and traditional separate protection methods are difficult to effectively respond to. It is urgent to coordinate public security and network security protection. However, the integration of the two faces many challenges and is a very promising research field. The aim of this study is to investigate technical approaches for the synergy between public safety and cyber security. This paper proposes a smart city safety protection model inspired by the human immune mechanism. It was found that through a three line defense architecture similar to the human immune mechanism, and with the help of certain algorithms and functional middleware modules, public security and network security protection components can be dynamically combined to achieve collaboration. This work has verified through experiments a promising path to effectively resist complicated attack threats intertwined with public safety and cyber security factors.

Background: Obesity is a global health crisis with a rapidly increasing prevalence among university students. Medical students are a unique population that may be at a higher risk of obesity due to the demanding nature of their studies and the associated stress. Objective: This study aimed to determine the prevalence of overweight, obesity, and the associated risk factors among medical students at Jazan University in Saudi Arabia. Methods: A cross-sectional study was conducted among 228 medical students from their 2nd to 6th academic years at the Faculty of Medicine, Jazan University. A self-administered questionnaire was used to collect data regarding sociodemographic characteristics, physical activity, dietary habits, comorbidities, medication use, family history, and lifestyle factors. Anthropometric measurements including height, weight, and waist circumference were recorded. Chi-square test and binary logistic regression were used to identify the risk factors associated with obesity. Results: The prevalence of overweight and obesity among the participants was 13.3% and 15% respectively. Hence, the combined prevalence of overweight and obesity is 28.3%. The mean weight was 63.39 ± 18.93 kilograms, and the mean height was 163.48 ± 9.78 centimeters. On the other hand, 17.3% of participants had underweight whereas 54.4% had normal BMI. Most of the participants (61%) did not engage in regular exercise. A high proportion consumed fruits (82.9%) and vegetables (58.8%) 3 or fewer days per week, and 84.2% consumed 3 or fewer meals per day. Fast food consumption more than 3 days per week was reported by 42.1% of participants. Obesity was not significantly associated with sociodemographic factors, physical activity, dietary habits, comorbidities, medication use, or family histories. However, those with a monthly family income of 15,000-24,999 riyals had significantly lower odds of obesity than those in the lowest income group (OR 0.230, p = 0.045). Conclusion: The prevalence of overweight and obesity among medical students at Jazan University is high. Although no significant associations were found between obesity and most risk factors, this study highlights the need for interventions that promote healthy lifestyles among medical students. Further research is needed to identify effective strategies for preventing and managing obesity in this population.

The approach to the personal experience and previous ideas about Physical Education of future Primary Education teachers is a starting point of great interest for the teaching of the subject of Didactics of Physical Education. The study aims to investigate these prior beliefs and to verify to what extent this initial perception changes after taking the course on “Didactics of Physical Education”. A concurrent mixed-methods study was conducted, which included two data collection procedures: (1) a pre-experimental design with a single group featuring pre-test and post-test; (2) the analysis of students' autobiographical accounts of their school experience with physical education. The participants were students enrolled in the Bachelor’s degree program in Primary Education at the University of Santiago de Compostela (USC) who undertook the course last year. The results obtained reveal that after taking the subject of Didactics of Physical Education, students give greater value to more positive concepts of learning, socializing, participating, and playing, among others. Similarly, in the post-test, the assessment of concepts such as competitiveness and physical fatigue diminished. In their autobiographical memories, students associate good memories with relationships with classmates and the playful and socializing nature of the subject; and among the bad memories, they highlight the content related to physical performance, competitiveness, and lack of attention to the diversity of students and their individual characteristics.

The prevalence of Noncommunicable Diseases (NCDs) in South Africa is increasing annually, with the burden projected to escalate by 2030. Devastatingly, factors such as lifestyle changes, urbani- sation, and an aging population significantly contribute to a rising burden of Cardiovascular disease (CVDs), diabetes, and cancer which directly impact the mortality and morbidity rates seen in South Africa. Recognising this, the South African government has seen the need for emphasis on developing policies and interventions tar- geting physical inactivity to prevent and manage NCD, particularly cost-free and easy to administer training protocols. However, phys- ical inactivity remains a significant issue, leading to various health concerns in rural communities, including injuries and Fetal Alcohol Spectrum Disorders (FASD). Despite effort to promote physical ac- tivity, the prevalence of NCDs continues to rise, necessitating target- ed interventions to ensure equitable healthcare among South African citizens. On the Contrast, preservation and promotion of traditional games is vital as they offer indigenous populations accessible and culturally relevant means to maintain health and wellness. In this regard, it is important to recognize the importance of preserving and promoting traditional games as they potentially serve as a method for indigenous people to maintain their health and wellness in a way that is accessible and culturally relevant to them. These games have gained popularity in South Africa, with initiatives underway to show- case them globally fostering cultural exchange. Further, revitalizing and conserving these games can cultivate a culture of health and wellbeing in South Africa.

This article objective was to identify a centenary trend in the growth and development of girls in the metropolis of Moscow. Material and methods — The physical development (body length and weight, chest circumference, right hand muscle strength, and menstrual function development) of Moscow girls was studied during the period from 1920 to 2020. The amount of own observations was 4581 girls aged 8-17 years. Results – A comparative analysis of the physical development of Moscow school girls of different decades revealed a statistically significant increase in body length by 3-5 cm and a significant increase in chest circumference in all age groups of girls of the beginning of the XXI century, compared with their peers in the 1960s and 1980s, which indicates the completion of the gracialization processes that have been observed since the 1980s. However, in all age groups, a decrease in the muscle strength of the right hand is still being noticed. Earlier terms of menarshe onset in modern Moscow school girls (12 years 9 months) and a shift in growth jumps to earlier terms were established. It is shown that the age of menstruation depends on the level of family wealth. Conclusions. In Moscow girls in the centenary dynamics, a tendency to increase the total body size and shift the terms of biological maturation to earlier terms was revealed.

Rubber compounds based on styrene-butadiene rubber, ethylene-propylene-diene-monomer rubber and the combinations of both rubbers were cured with different sulfur and peroxide curing systems. In sulfur curing systems, two type of accelerators, namely N-cyclohexyl-2-benzothiazole sulfenamide, tetramethylthiuram disulfide and combinations of both accelerators were used. In peroxide curing systems, dicumyl peroxide, and combination of dicumyl peroxide with zinc diacrylate or zinc dimethacrylate, respectively were applied. The work was focused on investigation of the curing system composition as well as type of the rubber or rubbers combinations on curing process, cross-link density and physical-mechanical properties of vulcanizates. The dynamic-mechanical properties on the selected vulcanizates were examined, too. The result revealed correlation between the cross-link density and physical-mechanical properties. Similarly, there was recorded certain correlation between cross-linking degree and glass transition temperature. The tensile strength of vulcanizates based on rubbers combinations was higher when compared to that based on pure rubbers, which points out the fact that by rubbers combination, not only the features of both elastomers can be combined, but also improved tensile characteristics can be achieved. When compared to vulcanizates cured with dicumyl peroxide, materials cured with sulfur system exhibited higher tensile strength. By application of co-agents in peroxide vulcanization, the tensile strength overcame the tensile behavior of sulfur cured vulcanizates.

The question of what generates conscious experience has mesmerized thinkers since the dawn of humanity, yet its origins remain a mystery. The topic of consciousness has gained traction in recent years, thanks to the development of large language models that now arguably pass the Turing test, an operational test for intelligence. However, intelligence and consciousness are not related in obvious ways, as anyone who suffers from a bad toothache can attest - pain generates intense feelings and absorbs all our conscious awareness yet nothing particularly intelligent is going on. Still, in the hard sciences, this topic is frequently met with skepticism because to date no protocol to measure the content or intensity of conscious experiences in an observer-independent manner has been agreed upon. Here we present a novel proposal: Conscious experience arises whenever a quantum mechanical superposition forms. Our proposal has several implications: First, it suggests that the structure of the superposition determines the qualia of the experience. Second, quantum entanglement naturally solves the binding problem, ensuring the unity of phenomenal experience. Finally, a moment of agency may coincide with the formation of a superposition state. We outline a research program to experimentally test our conjecture via a sequence of quantum biology experiments. Applying these ideas opens up the possibility of expanding human experience through brain-quantum computer interfaces.

Proteins play a pivotal role in supporting athletes by promoting muscle hypertrophy and minimizing protein catabolism during exercise. They stimulate muscle protein synthesis, aiding in the repair of exercise-induced muscle damage and serving as an energy source, particularly for post-exercise glycogen replenishment. In individuals with phenylketonuria (PKU), for whom protein intake is limited to essential phenylalanine (Phe), supplementation with Phe-free amino acids or glycomacropeptides is necessary. Tailored for macronutrient and micronutrient content, these protein substitutes fulfill most protein requirements, but lack Phe, unlike dietary sources of protein. Protein requirements for athletes with PKU exceed general recommendations due to limited availability in supplements and potential catabolism mitigation. Various factors influence tolerated dietary Phe in PKU, including protein substitute quantity, distribution, pharmacological treatment, age, growth rate, pregnancy, catabolic states, and physical activity. While general protein requirements for PKU surpass those of the general population, adherence to supplement regimens is crucial for athletes and patients with PKU. Strategically timed protein substitutes enhance muscle protein synthesis, body composition, and sports performance within safety limits. Individualized intake is essential for optimal outcomes, as proteins have a multifaceted role in optimizing athletic performance and addressing challenges in PKU.

The dessert banana is a popular fruit worldwide, but its ripening process is greatly accelerated by high temperatures, which eventually leads to an unpleasant taste and the appearance of spots on the skin of the fruit. To slow down the ripening of bananas, expensive strategies are used, which are usually not practical for conventional farmers in less developed countries. In this study, we try to find a less costly alternative. Therefore, the effects of coatings of lemon peel extract (2.5 %, 5 %, and 10 %), calcium chloride (4 %), and glycerol (2 %) on the shelf life and postharvest quality of banana fruit (Cavendish) stored at 20 ± 3 °C and 50 – 70 % relative humidity were investigated. Treatment with a mixture of 2.5 % lemon peel extract and 2 % glycerol resulted in an extension of the shelf life of the dessert banana by up to 6 days and no detectable fungal infestation. The mixture is an effective alternative to extend the shelf life and reduce quality losses in bananas.

Grape pomace (GP) is a winemaking residue that can be used as a functional ingredient due to its phenolic content, among others. The influence of GP, grape pomace extract (GPE) and encapsulated grape pomace extract (BGPE) on the phenolic compounds content, physical, textural and sensory properties of the functional biscuit (FB) was studied. In the production of FB, 10-30 % of the wheat flour in the standard biscuit was replaced by GP or by adding GPE and BGPE in amounts equivalent to the phenolic content of GP. The highest content of phenolic compounds was found when 30 % of GP was used. The antioxidant activity (AA) correlated well with the phenolic compound content (R > 0.87). The antiproliferative activity of biscuit extracts against cancer cell lines is in the following order: SW620 > Caco-2 > Hep G2, but the positive correlation with phenols and AA was not found. Textural properties of biscuits with GPE and BGPE addition were worse compared to GP and standard biscuits, i.e. they were harder. Biscuits with BGPE addition received the highest overall sensory score. The results indicate that biscuits enriched with phenolics from grape pomace could be a promising functional food with good sensory properties.

Asymmetry plays a major role in biology at all scales. This can be seen examining the helix of DNA, the fact that the human heart is on the left side, or that most people use their right hand. A single protein such as Myosin 1D can induce helical motion in another molecule. This causes cells, organs, and even entire bodies to twist in a domino effect, causing left-right behaviour. More in general, athlete movements are often asymmetric and, during the physical rehabilita-tion after injury the asymmetry is visually discernible. Herein we review the molecular basis of movement asymmetries and report on the available knowledge on the few therapeutics inves-tigated so far such as meloxicam. From a more rehabilitative perspective, it is very important to use effective methods to control the process of resolving the injury-related movement asym-metry through the complex use of specialized exercises, measurements and gait analysis which all can provide useful information on the effectiveness of rehabilitation plans. If for each athlete the normal range of asymmetry is known, the asymmetry can be treated individually and the evolution can be monitored over time. Appropriate measures should be taken if the movement asymmetry is outside this range. In addition, genetic, physiological, and psychological factors relevant to athlete health should be considered in the process of assessing and improving exer-cise asymmetry as we also discuss in this review. The main proposal of this work is that move-ment asymmetries in athletes should be treated individually, taking into account the athlete’s genetics, physical condition, and previous injuries.

Endurance triathlons impose substantial physiological stress, yet effects of short-course formats remain relatively unexplored. In this preliminary study, we assessed proteinuria and hydration levels in 27 well-trained triathletes (41.9 [7.4] years) who completed a sprint triathlon consisting of a 1500-m swim, 26-km cycle, and 8-km run. Urine samples were collected before and after the race. The results showed an increase in cases of post-race proteinuria from four to nine (p=0.03). Also, one case of urobilinuria and ketoacidosis was observed after the race. Pre-race glucosuria, which was present in nine cases, decreased to three cases post-race. Although hematuria cases decreased from six to two (p=0.13), pre-race leukocyturia (found in two cases) resolved post-race. There was a significant increase in urine specific gravity (from 1.018 to 1.023, p=0.03), indicating dehydration. In conclusion, short-course triathlons were found to induce post-race proteinuria, urobilinuria, and dehydration without exacerbating pre-race glucosuria, hematuria, or leukocyturia. These preliminary findings contribute to our understanding of medical guidelines for sprint triathlons, an area of endurance sports that has received limited research attention. Further investigation, both mechanistic and longitudinal, is warranted in this regard.

Sulfur, peroxide and combined sulfur and peroxide curing systems were applied for cross-linking of unfilled and carbon black filled rubber compounds based on ethylene-propylene-diene-monomer rubber. The results revealed that the type of curing system influenced the course and shape of curing isotherms. This resulted in the change of curing kinetics of rubber compounds. The cross-link density of vulcanizates cured with combined vulcanization systems was lower than that for vulcanizates cured only in the presence of sulfur or peroxide system. The results revealed good correlation between the cross-link density as well as the structure of the formed cross-links and physical-mechanical characteristics of the materials. It can be stated that by proper combination of vulcanization systems it is possible to modify tensile behavior of vulcanizates in targeted manner. On the other side, dynamical-mechanical properties were found not be significantly influenced by the composition of curing system.

Several lime mortars for the repair of painted plasters of the rock cut church of Ss. Pietro and Paolo in Matera were studied. They were designed taking into account both aesthetic criteria that need to be fulfilled in the field of paintings restoration, and physical-mechanical compatibility with the original materials on site, i.e. the pre-existing plasters and the supporting rock. Mixes with calcareous and silica aggregates, based on different grain size proportions, were prepared for filling missing portions of the original painted plaster. The effects of the mineralogical nature and size of the aggregates on the characteristics and properties of the mixes were investigated in relation to the microstructure, physical-mechanical features and resistance to salt ageing. At the end of the experimental campaign, the overall performances were evaluated.

The increased adoption of information and communication technology for smart grid applications will require innovative cyber-physical system (CPS) testbeds to support research and education in the field. The groundbreaking CPS testbeds with realistic and scalable platforms have progressively gained interest in recent years, with electric power flowing in the physical layer and information flowing in the network layer. However, CPSs are critical infrastructures and not designed for testing or direct training, as any misbehaving in an actual system operation could cause a catastrophic impact on its operation. Based on that, it is not easy to efficiently train professionals in CPSs. Aiming to support the advancement and encourage the training of industry professionals, this paper proposes and develops a complete testbed with commercial tools. The testbed can reliably replicate the performance of smart grid systems and the main potential cyber threats that electric grids may face. The complex interdependencies between the cyber and physical domains are discussed in detail, and different case scenarios are presented, providing insightful guidelines for key features and design decisions for future smart grid testbeds.

In recent years, due to the low energy utilization of the whole life-cycle of buildings and the di-minished indoor and outdoor comfort of buildings and the impact on the surrounding environ-ment caused by the carbon emissions of the building life-cycle, the establishment of a whole life- cycle carbon emission model for buildings to improve their energy utilization at all stages of their life-cycle has received unprecedented attention. In China, the construction industry has become a major carbon emitter, and traditional houses, as a green development building type, are an effec-tive way to achieve carbon neutrality in buildings, but the existing green building evaluation system lacks quantitative indicators of carbon emissions in the building life-cycle. The exclusive evaluation indexes for regional and characteristic buildings, such as traditional houses, are ne-glected; This study explored the formula for calculating the life-cycle carbon emissions model of traditional residential houses under a carbon emission intervention and used real measurements of the physical environment and comparative analysis of the limitations of existing local stand-ards; The results showed that the carbon emission calculation formulas for each stage of the life-cycle of traditional residential houses must be established by combining the selection of local building materials, and the materials for sustainable energy and carbon sinks of green systems. Based on the results of indoor and outdoor heat and humidity environmental tests of residential houses and an analysis of the limitations of existing evaluation indexes due to locality, four im-portant factors affecting locality green buildings in terms of energy utilization, site ecology and landscape, land saving and material saving were extracted; on this basis, the whole life-cycle carbon emission model of traditional residential houses is constructed by combining the existing green building evaluation standards with the carbon emission indexes of the life-cycle of tradi-tional residential houses.

Background: The diagnosis of metabolic syndrome (MetS) is a challenge in people with spinal cord injury (SCI). We aimed at identifying clinical risk factors or early markers of MetS in SCI that would facilitate a timely diagnosis and implementation of preventive/therapeutic strategies. Methods: 168 patients with chronic (>1 year) SCI underwent clinical and biochemical evaluations. MetS was diagnosed according to modified criteria of the International Diabetes Federation validated in people with SCI. Results: MetS was diagnosed in 56 of 132 men (42.4%) and 17 of 36 women (47.2%). At univariate regression analyses, putative predictors of MetS were an older age, a higher number of comorbidities, a lower insulin-sensitivity, the presence and intensity of pain, a shorter injury duration, a poorer leisure time physical activity (LTPA) and an incomplete motor injury. At the multiple regression analysis, a significant independent association with MetS only persisted for a poorer LTPA in minutes/week (OR: 0.998, 95%CI: 0.996, 0.999) and more severe pain symptoms as assessed by numeral rating scale (OR: 1.353, 95%CI: 1.085, 1.793). Conclusions: In patients with SCI, intense pain symptoms and poor LTPA may suggest a high likelihood of MetS, regardless of age, SCI duration, motor disability degree, insu-lin-sensitivity and comorbidities.

Developing novel wound dressings containing medicinal plant extracts can have several potential benefits, including improving the therapeutic value of the dressings and reducing the cost of producing wound dressings. In this study, we prepared foam dressing containing Eclipta prostrata leaf extract and gelatin (Eclipta prostrata dressing). Chemical composition was verified using Fourier transform infrared spectroscopy (FTIR), and pore structure was obtained by scanning electron microscopy (SEM). The physical properties, including absorption and dehydration properties, were also evaluated. The chemical properties were measured to determine the pH environment after being submerged with Eclipta prostrata dressings. The results revealed that the Eclipta prostrata dressing had a pore structure with an appropriate pore size (313.25 ± 76.51 µm and 383.26 ± 64.45 µm for the Eclipta prostrata A and Eclipta prostrata B dressings, respectively). The Eclipta prostrata B dressing was more consistent porosity, resulting in a higher absorption capacity and faster dehydration rate. According to physical properties, the Eclipta prostrata B dressing is best used on low-exuding wounds. Furthermore, the Eclipta prostrata A and B dressings make a slightly acidic environment. Therefore, our foam dressing will not interfere wound healing process.

Generation of unique identifiers extracted from the physical characteristics of the underlying hardware ensures the protection of electronic devices against counterfeiting and provides security to the data they store and process. This work describes the design of an efficient Physical Unclonable Function (PUF) based on the differences in the frequency of Ring Oscillators (ROs) with identical layout due to variations in technological processes involved in the manufacture of the integrated circuit. The logic resources available in the Xilinx Series-7 programmable devices are exploited in the design to make it more compact and achieve an optimal bit-per-area rate. On the other hand, the design parameters can also be adjusted to provide a high bit-per-time rate for a particular target device. The PUF has been encapsulated as a configurable Intellectual Property (IP) module, providing it with an AXI4-Lite interface to ease its incorporation into embedded systems in combination with soft- or hard-core implementations of general-purpose processors. The capability of the proposed RO-PUF to generate implementation-dependent identifiers has been extensively tested, using a series of metrics to evaluate its reliability and robustness for different configuration options. Finally, in order to demonstrate its utility to improve system security, the identifiers provided by RO-PUFs implemented on different devices have been used in a Helper Data Algorithm (HDA) to obfuscate and retrieve a secret key.

This article examines older physical education (PE) teachers’ wellbeing over the course of their career in Finland. The study highlights challenges to physical and mental functioning as well as how teachers respond to these challenges. The six interviewees were over 55-year-old PE teachers, whose career had lasted for more than 30 years. Qualitative methods were used in the collection, transcription and analysis of the research data. The qualitative analysis consisted of a series of interpretations that visualised the world described by the interviewees. All the research participants had physical problems that affected their teaching and make teachers consider a potential career change. To be able to teach, teachers adapted their ways of working according to the challenges brought by age and injuries. The research participants found that the challenges caused by musculoskeletal problems and ageing were an inevitable part of the profession. They emphasised the positive sides of the work: the profession permits varied workdays. In addition, the teachers noted that their work provides them with opportunities to remain physically fit. Teaching health education is a means to lighten the workload of older teachers. PE teachers enjoy their profession and are dedicated to it, despite all the challenges. The interviewed participants clearly experienced work engagement. Our development proposal for teacher education is that future PE teachers be informed about the risks involved in the profession. Such activity helps young teachers reflect proactively on the measures taken to maintain their functioning during their career and on perspectives related to the ways of working.

Abstract Issue Addressed: Men’s Sheds (‘Sheds’) have been identified as inherently health promoting and as potential settings to engage ‘hard-to-reach’ men in more structured health promotion initiatives. However, little is known about the sociodemographic or health and wellbeing characteristics of Shed members (‘Shedders’) on which such initiatives might be based. This study captures a baseline cross sectional analysis of Shedders (n=384) who participated in ‘Sheds for Life’, a health promotion initiative tailored to Sheds. Methods: Objective health measure, (body composition, blood pressure, blood lipids) captured via health screening as well as sociodemographic and health and wellbeing measures (physical activity, subjective wellbeing, mental health, social capital, cooking and diet) via questionnaires were assessed. Results: Participants were mostly over 65 years, retired with limited educational attainment. The majority were in the ‘at-risk’ categories for objective health measures, with most being referred to their GP following health screening. Older Shedders were also more likely to meet physical activity guidelines. Mental wellbeing was positively correlated with life satisfaction and increased social capital and these were also positively correlated with physical activity. Conclusions: Findings highlight the potential of Sheds in reaching a ‘hard-to-reach’ and ‘at-risk’ cohort of men. Despite a high prevalence of ‘at-risk’ objective health measures, participants report their health in positive terms. Future health promotion initiatives should capitalise on the inherent health promoting properties of Sheds. So what? Findings raise important implications for prioritising and designing health promotion initiatives in Shed settings.

The advancement in the production and usage of the cerium oxide nanoparticles have diverted the attention of scientists towards their usage in medical field and therapeutic usage. The clinical usage of these Nano ceria is based on their ability to moderate the oxidative stress and this is only because of their ability to change their valent state from +3 to +4 which makes them ideal for scavenging radicals for use in a number of systemic and neurodegenerative disorders. This review aims to synthesize the basic methods used for the synthesis of nanoparticles along with the use of ligand, stabilizing agent and other components. This review also concludes that how various physical and chemical properties of nanoparticles effect the basic biological activities such as antimicrobial activity, cytotoxicity and many others. However, during the standardization, some of the physiochemical properties, methods used for preparation and catalytic abilities must be taken into account.

Mechanical robustness, biocompatibility, and antibacterial performances are key features for materials suitable to be used in tissue engineering applications. In this work, we investigated the link existing between structural and functional properties of TiCu(Ag) thin films deposited by physical vapor deposition magnetron sputtering on Si substrates. The thin films were characterized by X-ray diffraction (XRD), nanoindentation, atomic force microscopy (AFM), and X-ray photoelectron spectroscopy (XPS). The TiCu(Ag) thin films showed complete amorphous structure and improved mechanical properties in comparison with pure Ti films. However, for contents in excess of 20% Ag, we observed the appearance of nanometric Ag crystallite. The TiCu(Ag) thin films displayed excellent biocompatibility properties, allowing adhesion and proliferation of the human fibroblasts MRC-5 cell line. Moreover, all the investigated TiCu(Ag) alloy display bactericidal properties, preventing the growth of both Pseudomonas aeruginosa and Staphylococcus aureus. Results obtained from biological tests have been correlated to the surface structure and microstructure of films. The excellent biocompatibility and bactericidal properties of these multifunctional thin films opens to their use in tissue engineering applications.

Reconfigurable computing is becoming ubiquitous in the form of consumer-based Internet of Things (IoT) devices. Reconfigurable computing architectures have found their place in safety-critical infrastructures such as the automotive industry. As the target architecture evolves, it also needs to be updated remotely on the target platform. This process is susceptible to remote hijacking, where the attacker can maliciously update the reconfigurable hardware target with tainted hardware configuration. This paper proposes an architecture of establishing Root of Trust at the hardware level using cryptographic co-processors and Trusted Platform Modules (TPMs) and enable over the air updates. The proposed framework implements secure boot protocol on Xilinx based FPGAs. The project demonstrates the configuration of the bitstream, boot process integration with TPM and secure over-the-air updates for the hardware reconfiguration.

We have shown that our varying physical constant model is consistent with the recently published variational approach wherein Einstein equations are modified to include the variation of the speed of light c, gravitational constant G and cosmological constant Λ using the Einstein-Hilbert action. The general constraint resulting from satisfying the local conservation laws and contracted Bianchi identities provides the freedom to choose the form of the variation of the constants as well as how their variations are related. When we choose dG/Gdt=3dc/cdt, ̇the same as in our quasi-phenomenological model, c=c₀ exp⁡(a^α-1), G=G₀ exp⁡[3(a^α-1)] and Λ=Λ₀ exp⁡[(a^-α-1)], where a is the scale factor and α=1.8, we are able to confirm the success of our the model in explaining three astrometric anomalies and the null results on the variation of G and the fine structure constant. We show that the model: (a) fits the supernovae 1a observational data better than the ΛCDM model; (b) determines the first peak in the power spectrum of the cosmic microwave background temperature anisotropies at multipole value of l=217.3; (c) calculates the age of the universe as 14.1 Gyr; and (d) finds the BAO acoustic scale to be 145.2 Mpc. These numbers are within less than 3% percent of the observed values and the values obtained by the ΛCDM model. Surprisingly we find that the dark-energy density is negative in a universe that has significant negative curvature and whose expansion is accelerating at a faster rate than predicted by the ΛCDM model.

Objective: To assess the functionality of the affected upper limb in children diagnosed with hemiplegia aged between 4 and 8 years after applying low-intensity modified constraint-induced movement therapy(mCIMT). Methods: Prospective case series study. A mCIMT protocol was applied for five weeks, with two hours of containment per day. The study variables were: quality of movement of the upper limb, spontaneous use, participation of the affected upper limb in activities of daily living, dynamic joint position, grasp-release action, grasp strength, supination and extension elbow movements. Four measurements were performed, using the QUEST scale, the SHUEE Evaluation, a hand dynamometer and a goniometer. Results: The sample was composed of 8 children with moderate manual ability. Statistically significant differences were detected in all the studied variables (p<0.05). The greatest increase occurred in spontaneous use from assessment 1-4 (p = 0.01), reaching 88.87% active participation in bimanual tasks. The quality of movement of the upper limb obtained a significant value due to the increase in dissociated movements and grasp (p = 0.01). Conclusion: A low dose (50 hours) of mCIMT increased the functionality of children diagnosed with congenital hemiplegia between 4 and 8 years of age with moderate manual ability.

The umbrella concept for the current efforts to digitize construction is known as Construction 4.0. One of its key concepts is cyber-physical systems. The construction industry is not only creating increasingly valuable digital assets (in addition to physical ones) but also the buildings and built infrastructures are increasingly monitored and controlled using digital technology. Both make construction a vulnerable target of cyber-attacks. While the damage to digital assets, such as designs and cost calculations, may result in economic damage, attacks on digitally-controlled physical assets may damage the well-being of occupants and, in worst-case scenarios, even damage (or death) to the users. The problem is amplified by the emerging cyber-physical nature of the systems, where the human checks may be left out. We propose that construction learns from the work done in the context of critical infrastructures (CI). First, a lot of CI is construction-related, and the process of designing and building it must be secured accordingly. Second, while most assets may not be critical in the CI sense, they are critical to the operations of a business and the lives of citizens. In the end, we recommend some steps so that well-established processes of critical infrastructure protection trickle down to make Construction 4.0 and the built environment more cyber-secure. With that in mind, we describe the possible inclusion of Construction 4.0 considerations into existing critical infrastructure protection (CIP) frameworks with minimum frictions. We also propose some suggestions regarding possible future courses of action to improve the increasingly vulnerable cyber-security environment of the built environment across all life cycle phases - design, construction, operation, maintenance, and end of life.

The COVID-19 outbreak has focused attention on the use of social distancing as the primary defence against community infection, yet forcing social animals to maintain that physical distance has presented significant challenges for health authorities and law enforcement. Anecdotal media reports suggest widespread dissatisfaction with social distancing as a policy, yet there is little prior work aimed at measuring community acceptance of social distancing. In this paper, we propose a new approach to measuring attitudes towards social distancing by using social media and sentiment analysis. Over a 4 month period, we found 82.5% of tweets were in favour of social distancing. The results indicate a widespread acceptance of social distancing in the community. We conclude by examining options for estimating the optimal (minimal) social distance required at scale, and the implications for securing widespread community support and acceptance of public health messaging.

Cloud-based CNC is an emerging paradigm of Industry 4.0 where computer numerical control (CNC) functionalities are moved to the cloud and provided to manufacturing machines as a service. Among many benefits, C-CNC allows manufacturing machines to leverage advanced control algorithms running on cloud computers to boost their performance at low cost, without need for major hardware upgrades. However, a fundamental challenge of C-CNC is how to guarantee safety and reliability of machine control given variable Internet quality of service, especially on public Internet networks. We propose a three-tier redundant architecture to address this challenge. We then prototype tier one of the architecture on a 3D printer successfully controlled via C-CNC over public Internet connections, and discuss follow-on research opportunities.

We have shown that three astrometric solar-system anomalies can be explained satisfactorily by using evolutionary gravitational constant G and speed of light c in the Einstein’s field equation. These are: a) the Pioneer acceleration anomaly; b) the anomalous secular increase of Moon-orbit eccentricity; and c) the anomalous secular change in the astronomical unit AU. The gravitational constant G and the speed of light c both increase as dG/dt = 5.4GH₀ and dc/dt = 1.8cH₀ with H₀ as the Hubble constant. We also show that the Planck’s constant ħ increases as dħ/dt = 1.8ħH₀. Additionally, the new approach fits the supernovae Ia redshift vs distance modulus data as well as the standard ΛCDM model with just one adjustable parameter H₀.

This review describes how resonance in amides is greatly affected upon substitution at nitrogen by two electronegative atoms. Nitrogen becomes strongly pyramidal and resonance stabilisation, evaluated computationally, can be reduced to as little as 50% that of N,N-dimethylacetamide. However, this occurs without significant twisting about the amide bond, which is borne out both experimentally and theoretically. In certain configurations, reduced resonance and pronounced anomeric effects between heteroatom substituents are instrumental in driving the HERON (Heteroatom Rearrangement On Nitrogen)^† reaction, in which the more electronegative atom migrates from nitrogen to the carbonyl carbon in concert with heterolysis of the amide bond, to generate acyl derivatives and heteroatom-substituted nitrenes. In other cases the anomeric effect facilitates S­_N1 and S_N2 reactivity at the amide nitrogen.

Activated carbons can be produced from biomass in a thermal process either in a direct carbonization-activation process or by first carbonizing the biomass and later on activating the biochars into activated carbons. The properties of the ACs are dependent on the type of process used for production. In this study, the properties of activated carbons produced in a one-stage and a two-stage process are considered. Activated carbons were produced by physical activation of two types of starting materials, bio chars produced from spruce and birch chips in a commercial carbonization plant and from the corresponding raw chips. The activated carbons produced were characterized regarding specific surfaces, pore volumes and pore size distributions. The un-activated bio chars had some degree of surface area 190 and 140 m²g^-1 for spruce and birch and pore volumes of 0.067 and 0.092 cm³g^-1. According to the results obtained, two slightly different types of activated carbons are produced depending if a one-stage or a two-stage carbonization and activation process is used. The ACs produced in the one-stage process had higher specific surface areas compared to the ones produced in a two-stage process (761-940 m²g^-1 vs. 540-650 m²g^-1) . In addition, total pore volumes were higher in one-stage process but development of micropores is greater compared to two-stage process. There was no significant difference in total carbon content between one-stage and two-stage process.

Wave steepness is presented as an extension and a valuable add-on to the conventional set of sea state parameters retrieved from satellite altimetry data. Following physical model based on recent advances of weak turbulence theory wave steepness is estimated from directly measured spatial gradient of wave height. In this way the method works with altimetry trajectories rather than with point-wise data. Moreover, in contrast to widely used parametric models this approach provides us with instantaneous values of wave steepness and period. Relevance of single-track estimates of wave steepness (period) is shown for wave climate studies and confirmed by a simple probabilistic model. The approach is verified via comparison against buoy and satellite data including crossover points for standard 1 second data of Ku-band altimeters. High quality of the physical model and robustness of the parametric ones are examined in terms of global wave statistics. Prospects and relevance of both approaches in the ocean wave climate studies are discussed.

Is the amount of “greenness” within a 250-meter, 500-meter, 1000-meter or a 2000-meter buffer surrounding a person’s home a good predictor of their physical health? The evidence is inconclusive. We reviewed Web of Science articles that used geographic information systems buffer analyses to identify trends between physical health, greenness, and distance within which greenness is measured. Our inclusion criteria were: (1) use of buffers to estimate residential greenness; (2) statistical analyses that calculated significance of the greenness-physical health relationship; and (3) peer-reviewed articles published in English between 2007 and 2017. To capture multiple findings from a single article, we selected our unit of inquiry as the analysis, not the article. Our final sample included 260 analyses in 47 articles. All aspects of the review were in accordance with PRISMA guidelines. Analyses were independently judged as more, less, or least likely to be biased based on the inclusion of objective health measures and income/education controls. We found evidence that larger buffer sizes, up to 2,000m, better predicted physical health than smaller ones. We recommend that future analyses use nested rather than overlapping buffers to evaluate to what extent greenness not immediately around a person’s home (i.e., within 1,000-2,000m) predicts physical health.

Background: in this paper, a new physical penetration technology for transdermal administration with traditional Chinese medicine (TCM) characteristics - Fu’s cupping therapy (FCT) - was established and studied by in-vitro and in-vivo experiments; the penetration effect and mechanism of FCT physical penetration technology (FCT-PPT) was preliminarily discussed. Method: Indomethacin (IM) as a model drug，by transdermal in vitro tests the establishment of the high，medium and low reference were finished as the chemical permeation system；chemical penetration enhancers and iontophoresis as a reference，the percutaneous penetration effect of FCT for IM patch was evaluated with 7 species diffusion kinetics model and in vitro drug distribution；naproxen as an internal standard，using UPLC-MS/MS technology，the IM quantitative analysis method in vivo was established，and pharmacokinetic parameters (AUC0-t，AUC0-∞，AUMC0-t，AUMC0-∞, Cmax and MRT) as indicators were used evaluate to FCT penetration role in vivo；in the same time，the group used 3K factorial design to study joint synergistic penetration effect on FCT and chemical penetration enhancers (CPEs)；by SEM and TEM，the skin micro and ultrastructural changes of the stratum corneum (SC) surface were observed, to explore pay tank penetration mechanism. Results: In vitro and in-vivo skin permeation experiments revealed that both the total cumulative percutaneous amount and in-vivo percutaneous absorption amount (AUC and AUMC) of indomethacin that permeated SD mouse skin using FCT techniques were greater than the amount observed using CPE and iontophoresis: Firstly, in contrast to the control group, the indomethacin percutaneous rate (PR) of the FCT lower group (FCTL) was 35.52%, and the enhancement ratio (ER) at 9h was 1.76X, which was roughly equivalent to the penetration enhancing effect of the CPEs and iontophoresis; secondly, the indomethacin PR of the FCT middle (FCTM) group and the FCT high intensity group (FCTH) were respectively 47.36% and 54.58%, ER at 9h were separately 3.58X and 8.39X; thirdly, pharmacokinetic studies showed that in-vivo indomethacin percutaneous absorption of the FCTs was higher than that of the control group, that of the FCTM group was slightly higher than that of the CPEs group, and that of the FCTM group was significantly higher than that of the others. Meanwhile, the variance analysis indicated that the combination of the FCT penetration enhancement method and the CPE method had beneficial effects in penetration enhancing of the skin: the significance level of the CPE method was 0.0004, which was apparently lower than the 0.001, meaning the difference was markedly significant; the significance level of the FCT was under 0.0001, its difference markedly significant; and the significance level of factor interaction A×B was lower than 0.0001, indicating that its difference of the synergism was markedly significant. Moreover, SEM and TEM images showed that the SC surfaces of SD rats treaded with FCT-PPT was damaged, and hard to observe the complete surface structure with its SC pores growing bigger and its special “brick structure” becoming looser, indicating that it broke the barrier function of skin, which revealed potentially a major route of skin penetration. Conclusion: FCT, as percutaneous penetration new technologies, has penetration effects significantly, with Chinese characteristics and highly clinical value, worth promoting development.

Nanoemulsions represent to cosmetic industry new options of formulations which are easier to apply, better functional benefit and potentially safer formulations. They are very interesting for cosmetic products intended for skin care and also for health products, due to the reduced size (range 20 to 500 nm) of the globules, which avoids processes of instability; they present transparency, fluidity, wettability, spreadability, increase skin penetration and good sensorial sensation. The main mechanism of instability of nanoemulsions is called Ostwald ripening, responsible to increase the average diameter of the emulsion globules, which, over time, the smaller globules have their contents enveloped by the larger ones. Recent research has investigated the effects of specific plant oils on skin hydration and barrier function, providing insights for personal care formulators. Among the so-called moisturizing agents commonly used in the cosmetic industry and which reduce Trans Epidermal Water Loss (TEWL) avoiding damage to the skin barrier, there are vegetable oils, especially sesame oil, raspberry seed oil. High-quality vegetable oils present specific compounds with common properties such as antimicrobial, antioxidant and anti-inflammatory activities and even moisturizing, emollient and sunscreen actions, making them attractive alternative and complementary treatments to soften the process of skin aging. This research proposes the development of nanoemulsions containing Sesame Oil (SO) added with Raspberry Oil (RO) by low energy method and consists and to evaluate in vitro SO and RO antioxidant activity; formulation studies; to instability process and in vitro evaluation HET CAM.

Cyber-physical testing has been applied for a decade in hydrodynamic laboratories to assess the dynamic performance of floating wind turbines (FWT). Rotor loads, computed by a numerical simulator fed with measurements, are applied in real time on the physical floater by using actuators. The present paper proposes a set of short and targeted benchmark tests that aim at quantifying the performance of actuators used in cyber-physical testing of FWT. They aim at ensuring good load tracking over all frequencies of interest, and satisfactory disturbance rejection for large motions. These benchmark tests are exemplified on two radically different 15MW FWT models tested at SINTEF Ocean.

This narrative review critically evaluates the multidimensional impacts of team sports on student wellness through the Wellness Wheel framework, encompassing physical, emotional, intellectual, social, spiritual, occupational, and environmental well-being. Methodologically, the review synthesizes empirical studies, systematic reviews, and meta-analyses from the last 20 years, extracted from databases such as PubMed, PsycINFO, Scopus, Web of Science, and Google Scholar, to construct a comprehensive understanding of how team sports contribute to holistic student development. Our findings highlight team sports as a vital component of educational and wellness programs, significantly enhancing not just physical health but also emotional stability, cognitive performance, social skills, spiritual enrichment, and environmental awareness. The review underscores the necessity of integrating team sports into educational curricula to promote a balanced and comprehensive approach to student well-being. It also identifies existing gaps in literature, particularly the need for further research on enhancing inclusivity and accessibility in team sports, ensuring that all students can benefit from their wide-ranging impacts. This study advocates for strategic initiatives to incorporate team sports in educational settings, emphasizing their essential role in cultivating a well-rounded, healthy, and inclusive student body.

Geopolymer concrete (GPC) represents an innovative green and low-carbon construction material, offering a viable alternative to ordinary Portland cement concrete in building applications. However, existing studies tend to overlook the recyclability aspect of GPC for future use. Various structural applications necessitate the use of concrete with distinct strength characteristics. The recyclability of the parent concrete is influenced by these varying strengths. This study examined the recycling potential of GPC across a spectrum of strength grades (40, 60, 80 and 100 MPa, marked as C40, C60, C80 and C100) when subjected to freeze-thaw conditions. The cementitious material comprised 60% metakaolin and 40% slag, with natural gravel serving as the coarse aggregate, and the alkali activator consisting of sodium hydroxide solution and sodium silicate solution. The strength of the GPC was modulated by altering the Na/Al ratio. After 350 freeze-thaw cycles, the GPC specimens underwent crushing, washing, and sieving to produce recycled geopolymer aggregates (RGAs). Subsequently, their physical properties and microstructure were thoroughly examined. The findings indicated that GPC with strength grades of C100, C80, and C60 were capable of enduring 350 freeze-thaw cycles, in contrast to C40, which did not withstand these conditions. RGAs derived from GPC of strength grades C100 and C80 complied with the criteria for Class II recycled aggregates, whereas RGAs produced from GPC of strength grade C60 aligned with the Class III level. A higher strength grade in the parent concrete correlated with enhanced performance characteristics in the resulting recycled aggregates.

(1) Introduction: The COVID-19 pandemic presented unique challenges for patients and healthcare providers, especially for those working with obesity and related health problems. E-health has emerged as a crucial tool for the follow-up of users undergoing bariatric surgery during this period, allowing remote monitoring of users' health status and providing access to virtual consultation with health professionals. This study aims to analyze the impact of the use of telemedicine during the COVID-19 pandemic on the results of bariatric surgery and user satisfac-tion with this follow-up. (2) Method: Observational study with retrospective data collection. The variables were divided into several groups: health data, associated comorbidities, quality of life, quality of sleep and satisfaction with telemedicine monitoring. (3) Results: Surgery significantly affected weight loss, in general more than 75% loss of excess weight. Comorbidities, like the qual-ity of life, were reversed over time, with 50% of subjects maintaining excellent levels. Although most users were satisfied with the monitoring, the variables had no relationship. (4) Conclusions: The follow-up assured by telemedicine did not alter the results of bariatric surgery, which may allow us to infer that it may be an option to consider for regular monitoring of the post-bariatric surgery process.

A new type of artificial block is proposed by modifying the traditional block. Based on the physical model experiment, the wave reflection and run-up characteristics of the new ecological blocks under regular waves were examined, and the influence of the height of the "planting trough" border on the hydrodynamic properties was analyzed. The results indicate that the wave reflection and run-up would decrease with a decrease in the breakwater slope. As wave height increases, wave run-up increases, and the reflection coefficient falls. Wave reflection and run-up increase with an increasing wave period. The relative depth of the water has a smaller impact on the wave reflection than the wave run-up. The reflection coefficient of the new ecological blocks is consistently lower than that of the conventional and continues to decrease as the border of the "planting trough" is raised. The raised borders prevent water loss in the trough, resulting in no significant improvement in the wave run-up performance of the new blocks. The reflection coefficient and the relative run-up R/H gradually increase with the average wave breaking parameter ξ increase. The crude permeability coefficients for the new blocks, New Heights 1 and New Heights 2, are 0.53, 0.53, and 0.54, respectively.

Policing is considered a high-stress occupation due to the demanding nature of the job. Addressing police stress requires a detailed understanding of how psychosocial risk factors influence various aspects of their well-being. Moreover, an analysis of the direct effects of work conditions and the mediating effects of cognitive appraisals is also warranted. Using the Demands-Resources-Individual Effects (DRIVE) model of work-related stress [19], this study investigated the direct effects of work conditions on well-being and also examined the intermediate role of perceived job stress and job satisfaction in the relationship between work conditions and well-being. Five hundred and seventy-eight police officers from the Jamaica Constabulary Force (J.C.F.) completed the questionnaire. Data were analyzed using hierarchical regressions and the Hayes Process tool for mediation analysis. Both perceived job stress and satisfaction mediated the relationship between work conditions and general physical health. Perceived job stress was an indirect pathway through which work conditions influenced psychological distress, whereas job satisfaction was not a significant mediator. In contrast, job satisfaction mediated the relationship between work conditions and positive well-being, but perceived job stress did not. These findings provide significant evidence for periodically monitoring and auditing perceptions of stress and job satisfaction as they are likely precursors to subsequent health problems.

The Coronavirus Disease 2019 (COVID-19) pandemic has had a major impact on the mental and physical health of hospitalized patients. In our study we focused on the onset of symptoms correlated with Post-traumatic stress disorder (PTSD), depression and physical disabilities in patients admitted to the Intensive Care Unit (ICU) because of a severe respiratory distress related to COVID-19 (COVID Group) compared with patients admitted to the same ICU for trauma and other medical conditions than COVID-19 (No-COVID Group). The physical symptoms and the level of disability were evaluated with the Glasgow Outcome Scale-Extended (GOS-E), the Quality of Life after Brain Injury (QOLIBRI) and the 3 levels version of EQ-5D (EQ-5D-3L) questionnaire; psychiatric symptoms were investigated using the Impact of Event Scale-Revised 22-item (IES-R), the Patient Health Questionnaire, 9-Item Version (PHQ-9) and the Generalized Anxiety Disorder Assessment, 7-items version (GAD-7). These questionnaires were administered 6 months after discharge. Patients in the No-COVID Group showed statistically significant more severe scores in all the physical assessments while similar relevant PTSD and depressive symptoms were reported in both groups. The results of the present study underline the psychopathological impact of being hospitalized in ICU because of COVID-19 even after 6 months from discharge ,suggesting the importance of assessing the psychiatric effects of COVID-19 in the long term in order to create supportive measures.

Background: Early rehabilitation is an important strategy for the treatment of severe diseases. The study aimed to assess the efficacy of early rehabilitation of patients with mild-to-moderate COVID-19. Methods: The retrospective single-center study with propensity score matching. Results: 180 patients (54 (44 - 62.3) yo) divided into three equal groups: 1 - physical exercises; 2 - physical exercises and chest massage in an electrostatic field; 3 - no rehabilitation. The length of stay (LOS) in the hospital in group 1 was 14 (11-15) days, group 2 - 13 (11-15) days, group 3 - 15 (13-18) days, p=0.0026. Physical exercises for patients with CT-1 improved the quality of life, assessed by the EQ-5D questionnaire, by reducing the level of anxiety and depression. The Hazard Ratio (HR) for desaturation (<93%) was 2.34 (95% Confidence Interval (CI) 1.18-4.63) for group 2, p=0.001. The HR for C-reactive protein level above 50 mg/l in patients with CT-2 was 2.33 (95% CI 1.56-3.47), p=0.0001. Conclusions: Rehabilitation programs are safe for СOVID-19-patients; reduce hospital LOS; improve the quality of life. Continuous monitoring of a patient's condition during rehabilitation is essential. ClinicalTrials.gov ID: NCT0580836

Introduction: When analyzing the current situation in Spain, derived from our current lifestyles far from following a Mediterranean lifestyle, there is an alarming prevalence of diabesity, which increases the global risk of suffering from cardiovascular disease (CVD) and decreases the quality of life related to health (QLRH). In order to guarantee, beyond glycemic control of patients with type 2 diabetes (DM2), adequate control of cardiovascular risk factors (CVRF) in DM2, it will be necessary to carry out a community intervention focused on the application of education programs focused on promoting the acquisition of healthy eating habits through the Mediterranean diet (DMED). This dietary pattern, together with physical exercise, has been shown to contribute to improving the QLRH of patients. Objective: To analyze the quality of life related to health, present in patients with poorly controlled type 2 diabetes, to determine the possible relationship between this and the degree of adherence to the Mediterranean diet and to examine whether there are differences between the sexes. Material and methods: Observational descriptive study in 93 patients diagnosed with DM2 with poor glycemic control (1Ac ≥ 7%), carried out in various health centers in Albacete and Cuenca, in which the baseline relationship between adherence to DMed and the HRQoL. They were administered a data collection sheet that included a survey of the degree of adherence to the DMed (MEDAS-14) and QLRH (SF-12v2) in the Primary Care (PC) medical and nursing consultations. The variables were analyzed: age groups, sex, years of evolution of DM2, body mass index (BMI), as well as basal glycemia (GB) and glycosylated hemoglobin (HbA1c). The “MEDAS-14” (adherence to DMED) was the main variable and the “SF-12v2” (QLRH) was the secondary variable. Material and methods: Observational descriptive study in 93 patients diagnosed with DM2 with poor glycemic control (1Ac ≥ 7%), carried out in various health centers in Albacete and Cuenca, in which the baseline relationship between adherence to DMed and the HRQoL. They were administered a data collection sheet that included a survey of the degree of adherence to the DMed (MEDAS-14) and QLRH (SF-12v2) in the Primary Care (PC) medical and nursing consultations. The variables were analyzed: age groups, sex, years of evolution of DM2, body mass index (BMI), as well as basal glycemia (GB) and glycosylated hemoglobin (HbA1c). The “MEDAS-14” (adherence to DMED) was the main variable and the “SF-12v2” (QLRH) was the secondary variable. Results: Patients with poorly controlled DM2 and with low adherence to the MedDM show a non-significantly greater affectation in the physical sphere: fair general state of health, physical function I (limitation to make moderate efforts such as moving a table, vacuuming or walk more than an hour), physical function II (limitation to climb several flights of stairs), physical role (problems at work or daily activities doing less than loved ones), physical role II (they had to stop performing some tasks at work or activities of daily living) and regular body pain. Presenting less affectation in the mental field: emotional role I, emotional role II, mental health I, vitality and mental health II. Without affectation in the social function since they consider that rarely the emotional or physical problems have hindered their social activities. Conclusions: Diabetic patients with poor glycemic control have low adherence to the MedMD (<9 points) and have poor QLRH. Low adherence to the DMed and obesity are related to a greater affectation in the physical dimension and less affectation in the mental dimension without affectation in the "social function".

Knee Osteoarthritis (KOA), the most common knee degenerative disease, involve a slow destructive process, leading to disability and ultimately total knee replacement. The progression of KOA is related to the loss of rheological properties of the synovial fluid (SF), due to slow immunological, inflammatory and enzymatic processes that cleave the hyaluronic acid (HA) and decrease the concentration of specific proteins. Since no effective treatments have been found to halt the progression of KOA, injection of HA-based viscoelastic gels combined with physiotherapy (PT) is an alternative to symptomatic therapies. In order to evaluate the effect of viscosupplementation and PT on the SF characteristics, the SF aspirated from the KOA was spectrophotometrically and rheological analyzed, comparing the receiving groups of HA Kombihylan® and groups that received Kombihylan® and complex PT. In patients treated with PT, SF extracted 6 weeks after viscosupplementation had a superior elastic moduli (G') and viscous moduli (G") profile behavior, having a homogeneous distribution of proteins and polysaccharides in the SF, stimulating stronger interactions. In the absence of PT the G' and G" profiles are non-uniform, suggesting an unorganized supplemented SF with some clustering phenomena, proteins aggregation and a low level of entanglement between HA and macromolecular components in the SF.

Good child protection systems and processes require reliable and accurate data. A retrospective study of the case records of 452 children referred to a major UK children’s tertiary centre for suspected child maltreatment was undertaken to determine whether routinely collected data on a child’s journey through the child protection system, together with a study of related multidimensional factors, can be used to develop an enhanced dataset to protect children in the UK and in other countries. Child maltreatment was substantiated in 65% of referred cases, with the vast majority of referrals coming from children living in the most deprived neighbourhoods in the country. Domestic violence and abuse, and the child’s previous involvement with statutory bodies was associated with case substantiation. Physical abuse predominated, with soft tissue injuries, including dog bites, and burns. Burns were related almost exclusively to supervisory neglect. There were also cases of medical neglect. Emotional abuse was associated with exposure to domestic violence and abuse, and to self-harm. The strengths and weaknesses for single centre data systems were explored, concluding with a recommendation to establish an agreed national and international minimum data set to protect children from maltreatment.

Aim: To determine whether an AI model and single sensor measuring acceleration and ECG could model cognitive and physical fatigue for a self-paced trail run. Methods: A field-based protocol of continuous fatigue repeated hourly induced physical (~45 minutes) and cognitive (~10 minutes) fatigue on one healthy participant. Physical load was a 3.8 km, 200 m vertical gain, trail run with acceleration and electrocardiogram (ECG) data collected using a single sensor. Cognitive load was a Multi Attribute Test Battery (MATB) and separate assessment battery including the Finger Tap Test (FTT), Stroop, Trail Making A and B, Spatial Memory, Paced Visual Serial Addition Test (PVSAT), and a vertical jump. A fatigue prediction model was implemented using a Convolutional Neural Network (CNN). Results: When the fatigue test battery results were compared for sensitivity to the protocol load, FTT right hand (R2 0.71) and Jump Height (R2 0.78) were the most sensitive while the other tests were less sensitive (R2 values Stroop 0.49, Trail Making A 0.29, Trail Making B 0.05, PVSAT 0.03, spatial memory 0.003). Best prediction results were achieved with a rolling average of 200 predictions (102.4 s), during set activity types, mean absolute error for ‘walk up’ (MAE200 12.5%) and range of absolute error for ‘run down‘ (RAE200 16.7%). Conclusion: We were able to measure cognitive and physical fatigue using a single wearable sensor during a practical field protocol including contextual factors in conjunction with a neural network model. This research has practical application to fatigue research in the field.

In this paper, we propose a lightweight physical layer aided authentication and key agreement (PL-AKA) protocol in the internet of things (IoT). Conventional evolved packet system AKA (EPS-AKA) used in long-term evolution (LTE) systems may suffer from congestions in core networks by the large signaling overhead as the number of IoT devices increases. Thus, in order to alleviate the overhead, we consider a cross-layer authentication by integrating physical layer approaches to cryptography-based schemes. To demonstrate the feasibility of the PL-AKA, universal software radio peripheral (USRP) based tests are conducted as well as numerical simulations. The proposed scheme shows a significant reduction in signaling overhead compared to the conventional EPS-AKA in both simulation and experiment. Therefore, the proposed lightweight PL-AKA has the potential for practical and efficient implementation of large-scale IoT networks.