In the age of artificial intelligence (AI) and automation, understanding the factors that contribute to successful upskilling and reskilling is crucial for workforce adaptability. Research on AI and automation has shown that they affect the workforce, but there is still a gap in understanding what factors contribute to successful upskilling and reskilling initiatives, especially from an organizational perspective. This study employs fuzzy-set qualitative comparative analysis (fsQCA) to analyze these factors and identify effective combinations for promoting upskilling and reskilling. By examining complex causal relationships and incorporating case studies, this article aims to enhance the understanding of upskilling initiatives in the AI and automation era. The findings provide insights into key factors driving successful upskilling and reskilling and offer implications for organizations seeking to improve their initiatives, ultimately promoting workforce adaptability and competitiveness.

As a typical visual positioning system, monocular ranging is widely used in various fields. However, when the distance increases, there is a greater error. YOLOv8 network has the advantages of fast recognition speed and high accuracy. This paper proposes a method by combining YOLOv8 network recognition with a monocular ranging method to achieve target localization and grasping for the NAO robots. By establishing a visual distance error compensation model and applying it to correct the estimation results of the monocular distance measurement model, the accuracy of the NAO robot's long-distance monocular visual positioning is improved. Additionally, a grasping control strategy based on pose interpolation is proposed. Throughout, the proposed method's advantage in measurement accuracy was confirmed via experiments, and the grasping strategy has been implemented to accurately grasp the target object.

With worsening environmental degradation and increasing international demand for human health, plant cell based technology will be more important. The aim of this review is to give an overview regarding key points of current progress and development trend of nature medical and edible plants from the framework of whole plant cell engineering including cell cultures, cell fusion and cell splitting derived biotechnology. Here we sum up three main application trends of medical plants cell cultures covering industrial output, technology upgrading and potential resource development. We also provide classification and typification insights to summarize the development of somatic hybridization in cereal, vegetables crops and other medicinal and edible plants as well as application of artificial polyploidy induction in major medicinal herbs. Development medicinal and edible homologous plants based on modern plant cell engineering will bring us a promising future.

Sepsis is a life-threatening condition caused by the body's overwhelming response to an infection, such as pneumonia or urinary tract infection. It occurs when the immune system releases cytokines into the bloodstream, triggering widespread inflammation. If not treated, it can lead to organ failure and death. Unfortunately, sepsis has a high mortality rate, with studies reporting rates ranging from 20% to over 50%, depending on the severity and promptness of treatment. According to the World Health Organization (WHO), the annual death toll in the world is about 11 million. One of the main toxins responsible for inflammation induction are lipopolysaccharides (LPS, endotoxin) from Gram-negative bacteria, which ranks among the most potent immunostimulants found in nature. Antibiotics are consistently prescribed as a part of anti-sepsis-therapy. However, antibiotic therapy (i) is increasingly ineffective due to resistance development and (ii) most antibiotics are unable to bind and neutralize LPS, a prerequisite to inhibit the interaction of endotoxin with its cellular receptor complex, namely Toll-like receptor 4 (TLR4)/MD-2, responsible for the intracellular cascade leading to pro-inflammatory cytokine secretion. The pandemic virus SARS-CoV-2 has infected hundreds of millions of humans worldwide since its emergence in 2019. The COVID-19 (Coronavirus disease-19) caused by this virus is associated with high lethality, particularly for elderly and immunocompromised people. As of August 2023, nearly 7 million deaths were reported worldwide due to this disease. According to some reported studies, upregulation of TLR4 and the subsequent inflammatory signaling detected in COVID-19 patients “mimics bacterial sepsis”. Furthermore, the immune response to SARS-CoV-2 was described by others as “mirror image of sepsis”. Similarly, the cytokine profile in sera from severe COVID-19 patients was very similar to those suffering from the acute respiratory distress syndrome (ARDS) and sepsis. Finally, the severe COVID-19 infection was frequently accompanied by bacterial co-infections, as well as by the presence of significant LPS concentrations. These data indicate similarity and interdependences of both syndromes, but also significant differences which will be discussed in the present review.

Alternative splicing can produce transcripts that affect cancer development and shows potential for cancer diagnosis and treatment. However, intron retention (IR), a type of alternative splicing, has been less systematically studied in cancer biology research. Here, we generated a pan-cancer IR landscape for more than 10,000 samples across 33 cancer types from The Cancer Genome Atlas (TCGA). We characterized differentially retained introns between tumor and normal samples and identified retained introns associated with survival. We discovered 988 differentially retained introns in 14 cancers, some of which demonstrated diagnostic potential in multiple cancer types. We also inferred a large number of prognosis-related introns in 33 cancer types, and the associated genes included well-known cancer hallmarks such as angiogenesis, metastasis, and DNA mutations. Notably, we discovered a novel intron retention event inside 5′UTR of STN1 that is associated with the survival of lung cancer patients. The retained intron reduces translation efficiency by producing upstream open reading frames (uORFs) and thereby inhibits colony formation and cell migration of lung cancer cells. Besides, the IR-based prognostic model achieved good stratification on certain cancers, as illustrated in acute myeloid leukemia. Taken together, we performed a comprehensive IR survey at a pan-cancer level, and the results implied that IR has the potential to be diagnostic and prognostic cancer biomarkers, as well as new drug targets.

Advanced genomics, transcriptomics and epigenomics techniques are providing unprecedented insights into the understanding of the molecular underpinnings of the central nervous system, including the neuro-sensory cochlea of the inner ear. Here, we report for the first time a comprehensive and updated overview of the most advanced omics techniques for the study of nucleic acids, and their applications in cochlear research. We describe the available in vitro and in vivo models for hearing research, the principles of genomics, transcriptomics and epigenomics, alongside their most advanced technologies (like single cell omics and spatial omics), which allows to investigate the molecular events that occur at single cell resolution retaining the spatial information.

In this work, the nearest neighbor distances and Voronoi cell features of the Cu-Ag deposits were analyzed and fitted with Lognormal, Weibull, and Gamma distributions. The nearest neighbor distance distributions of the samples were compared with those of complete spatially random points, showing spatial inhomogenity due to the nucleation exclusion effect. The radial distribution function was calculated, showing both influences from the grain size and the nucleation exclusion effect. Voronoi cells were generated based on the shape of the grains. The size, occupancy, and coordination of the Voronoi cells were examined and fitted. The results show that despite the Cu-Ag deposits seem to be governed by instantaneous nucleation mode, the spatial distribution of the nuclei is more impacted by the nucleation exclusion effect than the Cu-only samples. This behavior is also justified by the grain size distribution generated with Voronoi cell size and occupancy distributions.

Enamel erosion is a process which happens every time we eat and it may be accelerated by some particular acid foods, drinks or other agents. Dental enamel when damaged by low pH substances becomes chalky, rough, opaque, yellowed and it can be related to dentinal hypersensitivity. To the present day, several possible solutions are available, therefore the aim of this study was to evaluate the effect of a biocompatible minerals serum based on calcium silicate, sodium phosphate and fluoride (Regenerate™) on the damaged enamel by four different acid liquids. 135 ovine teeth were equally divided into 5 groups and submerged for one week into lemon juice, energy drink, coffee, tea and physiologic solution for the negative control. The first 4 groups were evaluated for their color with an analogical color scale (Vita® Scale) and for their surface assigning a qualitative aspect among opaque, rough, chalky or smooth. Then they were treated with hydroxyapatite gels and re-evaluated for the same parameters. Data were checked for the normal distribution with Shapiro-Wilk test and analyzed with dependent t-test or Wilcoxon Signed Rank test, every test with a p≤0.05. Both color and surface aspect showed a strongly significant improvement after the treatment. Biocompatible minerals serum based on hydroxyapatite is able to reverse teeth erosion, improve the color and restore the smoothness of the dental enamel.

Basil (Ocimum basilicum L.) is one of the important medicinal and aromatic plants. Light intensity is an indispensable factor for plants due to its effect on photosynthesis and physiological processes. Here, we investigated the impact of light intensities and harvesting times on the photosynthesis of green and purple basil. The experiment involved subjecting the plants to three different sunlight levels for 12 days: complete – 100%, 50%, and 30% sunlight. In addition, we scrutinize the harvesting time. The highest levels of photosynthetic and protective pigments were detected under full sunlight conditions in the purple basil harvested at noon. The highest levels of soluble and storage carbohydrates were recorded in the purple basil grown under full sunlight and harvested in the early morning. In contrast, their lowest levels were obtained in plants grown under 30% sunlight and harvested at noon time. Under all light treatments, the maximum quantum yield of photosystem II (FV/FM) was detected at 4 a.m. in both basil varieties; it decreased at noon and increased again at 5 p.m. Non-Photochemical Quenching (NPQ) got most elevated in the green variety under all light intensities at noon. However the highest NPQ was detected in the purple variety at 8 a.m. The NPQ was lowest in both basil varieties during the early morning and afternoon. Full sunlight at noon caused temporary photoinhibition and reduced car-bohydrates while enhancing pigment concentration and photo-protective mechanisms in basil plants.

In this communication the concept of functional materials is understood such as real modified substrates for nanomedicine applications. Functional and modified substrates focused on microcapsules and devices for new nanomedicine diagnosis and treatments. Cases of different materials are shown to support the functionality strategy, as in particular chemicals, pharmacophores, and controlled nano-chemistry for the design of nanoplatforms. Recent studies have reported hybrid inorganic/organic compositions for biocompatible, biodegradable, and support materials added to particular physical properties such as conductive, semiconductive, and high electromagnetic fields from the near field within the nanoscale to far-field applications and new nano-pharmacophores and nanomedicine therapeutics. New approaches are shown from the nano-scale to the micro- and higher sizes of substrates for improved therapeutic strategies. Micro-capsules for biosensing and drug delivery applications were developed. In addition, we report recent and novel research centered on implantable, portable, and wearable devices applied to future treatments.

Pediatric chronic pain is an important public health issue given its notable impact on numerous domains of living. Pediatric chronic pain is also often comorbid with emotional, developmental, or behavioral conditions which can lead to more severe negative outcomes and an even greater reduction in positive outcomes compared to those without comorbidities. Flourishing is a positive outcome that chronic pain status has been shown to impact. We explored flourishing in children aged 6-17 years living with chronic pain as well as those with chronic pain and comorbidities using data from the 2018/2019 National Survey of Child Health. There were significant associa-tions between chronic pain condition status and all demographic variables (sex, age, race/ethnicity, poverty level, parental education, health insurance status). Results of hierarchical logistic regression found that chronic pain condition status significantly predicted flourishing. Children with chronic pain were 2.33 times less likely to flourish, and children with chronic pain plus an emotional, developmental, or behavioral comorbidity were 13 times less likely to flourish than typical peers. Given their significantly lower likelihood of flourishing, there is an urgent need for interventions targeted at children experiencing chronic pain and mental health comor-bidities.

This study explores female university students' attitudes and concerns toward pornography, based on their experience watching it and on sexual encounters with men. It used a qualitative descriptive design. Individual semi-structured interviews were conducted with 22 participants between March and April 2020. Thematic data analysis was performed using COREQ reporting guidelines. Three themes emerged from the data: 1) the sexual learning process, 2) the role of pornography in women’s sexuality, and 3) sexual experiences. Participants reported how they learned about sexuality and how pornography influenced sexual experiences. Self-esteem issues and societal norms regarding hair removal, and difficulty saying “no” to unwanted or humiliating sexual practices were found. Young women were not comfortable with women’s representations in mainstream pornography. They blame pornography for negative sexual experiences and claim it influences them and young men. Participants usually assumed submissive roles during sex and permitted aggressive sexual behaviors. The study reveals valuable information on how young women learn about sex, difficulty in refusing unwanted sexual activities, and even aggressive practices. Sexual education programs should include assertiveness training to improve sexual health, consent, and well-being.

Six mode shapes, including bending and torsion, were documented for five different basketball rims and backboards at the United States Military Academy, West Point, New York, USA. The frequency and damping ratio of each mode shape were also determined. The empirical process began with the time-domain excitation and response of each rim-backboard system. The impulse of excitation came from an impact hammer separately applied to sequentially, to each node. The sinusoidal response was gathered from an accelerometer at a fixed location, node 1. Each time-domain excitation-response was then converted to a frequency domain Bode plot for each node by a B&K 2034 Signal Analyzer, giving transfer functions of output/input versus frequency. Structural Measurements System (SMS) Software was used to fit mode shapes to the Bode plots. Each of the six mode shapes were fitted to the Bode plots of each node at a specific modal frequency. Each of the six mode shapes were a function of the locations of the nodes, and the Bode plot gathered at each node. The first and second modes were critical for showing that the Energy Rebound Testing Device statistically correlated with the energy transferred to the rim and backboard. A known perturbation mass was selectively attached to the rim, to help isolate the dynamic masses and spring rates for the rim and backboard, to ascertain the kinetic energy transferred to the rim had a 95.67% inverse correlation with rim stiffness.

This paper examines the relationship between GDP per capita and waste generated in European Union countries, highlighting the importance of this relationship for understanding the environmental consequences of economic growth and formulating waste management policies. The analysis findings demonstrate that, in most cases, higher GDP is associated with higher amounts of waste, although there are exceptions to this trend. A smaller number of countries are also found where no such relationship exists. These are primarily high-income countries in the lower part of the EKC or countries in transition. Cluster analysis reveals regional differences in the relationship between GDP and waste that the economic factors and the level of development in the regions concerned can explain. Bulgaria is among the European countries with the lowest economic growth associated with a large amount of waste. The analysis, therefore, focuses on Bulgaria. The impact of GDP per capita, Human Development Index and Population Density on municipal waste in Bulgaria is studied. The aim is to identify significant relationships and dependencies between these factors and the amount of waste. Based on the results of multiple regression analysis and the findings from municipal waste management data in Bulgaria, specific actions are proposed for municipal waste management in the country. Recommendations are made for developing sustainable waste management policies and sharing best practices between regions.

This paper intends to delve deeply into the current understanding of the ways in which the transition from a central-based economy to an economy relying on free competition, has led to changes in the big urban centres, bringing about a change in the relationships with the suburban areas. The authors take into account the high population density, the lack of space and the elevated price of terrains inside the big cities, hence urban functions migrate beyond the administrative boundaries, thus favouring the process of suburbanization. Within this context, commercial forces are shifted, migrating from the centre to the urban peripheries, or even outside them. This research is based on a comprehensive process of participative investigation (2012-2022) in Bucharest, Ro-mania’s capital city. The research relies on field investigation, statistical and quantitative analyses and bibliographical sources. The conclusions rely primarily on the idea that political changes cannot be separated from economic, cultural and environmental ones, highlighting globalizing flows and the development of big cities. Industrial activities, strongly developed within a central-based economy, have significantly declined, partly compensated for by the development of the tertiary sector and of commercial services, in particular, leading to a functional reconversion of the urban peripheries and of suburban areas. The conclusions suggest that it is very important to be highly careful towards the dilemmas and provocations ensuing from uncontrolled urban growth, therefore several measures of urban planning should be taken with a view to achieving a better co-operation between urban stakeholders and those from the metropolitan areas so as to attain some common objectives in infrastructure in order to reach an integrated regional development.

Recent works have shown that collective single photon spontaneous emission from an ensemble of N resonant two-level atoms is a rich field of study. Superradiance describes emission from a completely symmetric state of N atoms, with a single excited atom prepared with a given phase, for instance imprinted by an external laser. Instead, subradiance is associated with the emission from the remaining N−1 asymmetric states, with a collective decay rate less than the single-atom value. Here, we discuss the properties of the orthonormal basis of symmetric and asymmetric states and the entanglement properties of superradiant and subradiant states.

This study investigated the presence and characteristics of Juglans neotropica in three ecosystems in Southern Ecuador: Montane Evergreen Forest, Evergreen Seasonal Lower Montane Forest, and Semideciduous Foot Montane Forest. The main focus was on the species' multipurpose nature as both a fruit and timber source. Six study sites, totaling at least 0.5 hectares each, were established, with four in Loja province and two in Zamora Chinchipe province.The results showed significant differences in dendrometric variables across the sites, with the most favorable growth recorded in The Tundo, where trees exhibited an average diameter at breast height (DBH) of 45.16 cm, basal area (G) of 1.41 m2, total height (TH) of 19.22 m, canopy height (CH) of 13 m, cubic volume (CV) of 3.55 m3, and total volume (TV) of 5.22 m3. The species displayed a clumped distribution pattern, as indicated by a Morisita index greater than 1. Regarding abundance, the highest density of 297 trees per hectare was found in Argelia, while Victoria had the lowest density of 46 trees per hectare. This research highlights the importance of Juglans neotropica as a multipurpose species, providing both valuable fruits and wood resources in the studied ecosystems of Southern Ecuador.

Why do the eyes remain comparatively large whereas the cornea is reduced in most troglobiont mysids? Are there any important organ size-dependent functions served by non-visual eye rudiments? This issue was approached by measuring eye structures in five troglobiont species of Mysida and two Stygiomysida compared with 14 troglophile and 49 trogloxene Mysida species. The Organ of Bellonci (OB) was found in all Mysida and as first records also in Stygiomysida. The length of OBs increased with individual body length and eye length in four examined species: from postnauplioid larvae to adult stage in a troglophile and a trogloxene mysid species examined; and from juveniles to adults in a troglobiont mysid and a troglobiont stygiomysid. At the interspecific level, eye length was on average 26% shorter at a given body length while the OB was 40% longer at a given body length and 54% longer at a given eye length, respectively, in adult troglobionts compared with trogloxene mysids. The OB is clearly proliferating while the cornea is reduced in troglobionts. This points to sensory functions (possibly together with other functions). The sensory pore organ was found in all 15 Mysida species whose eyes were mounted on slides, and a first record of this organ was also found in Stygiomysida.

As the demand for aromatic and medicinal herbs increases, so does the pressure to intensify production, increasing the risk of overexploitation of these natural resources. Sustainability corresponds to the preservation of something that exists in the present and must be maintained in the future, implying accountability and obligation. However, in order to maintain the conditions and essential goods for the survival of future generations, consumers and businesses must commit to sustainable practices. The circular economy is considered one of the solutions to promote a sustainable system and can be defined as a transition from a linear model, where resources are transformed, used and discarded, to a circular (regenerative) model, where materials are reused whenever possible. An ecologically correct approach to waste reuse avoids the negative impacts associated with improper disposal of agro-industrial wastes, such as mass proliferation of microorganisms, production of greenhouse gases, loss of energy potential, and other negative impacts on the environment or human health. The objective of this study is to provide a compilation of good agricultural practices that promote sustainability in the production of medicinal and aromatic herbs, particularly in the areas of cultivation, harvesting, drying, extraction, and packaging, and to highlight the potential for evaluating processing residues in medicinal and aromatic herbs.

With the continuous improvement and observable benefits of electric vehicles (EVs), major logistic companies are introducing more EVs into their conventional fleets. This gives rise to a new type of vehicle routing problem with mixed vehicles, where heterogeneous internal combustion vehicles (ICVs) and electric vehicles are considered in route planning. In addition, certain deliveries that are not efficient on any type of vehicles, are outsourced to third-party common carriers. In this paper, we define this problem as a mixed vehicle routing problem with common carriers (MVRPC). The objective of such problems is to minimize the transportation costs by considering routes with ICVs and EVs, the possibility of visiting recharging stations, outsourcing options, and drivers’ layover regulations. This variant of the vehicle routing problems has many practical applications, particularly in the design of long-haul transportation and last-mile delivery services. Effective MVRPC solutions play a key role in promoting the going Green image and optimally allocating resources. The problem has received limited attention in the literature likely because addressing all the needed aspects is especially challenging. To solve the large-scale problem, we develop a branch-and-cut pricing framework that relies on strong cuts and customized labeling algorithms. Numerical experiments highlight the effectiveness of our algorithm. This success can be attributed to tailored critical resources, dynamically bounded bidirectional labeling procedures, strong dominance criteria, and implementation strategies.

The connection between marital status and suicidal behavior has been poorly assessed in South Asia. We aimed to see the proportion of marital status in individuals in suicidal behavior in South Asian countries. We followed PRISMA guidelines and registered the protocol in advance (PROSPERO 2023 CRD42023399906). A systematic search was conducted in Medline, Embase, and PsycINFO. Meta-analyses were performed to pool the proportion of married individuals with suicidal behavior (total, suicide, and suicide attempt) in South Asian countries. Our search identified 47 studies for this review from six countries published from 1999 to 2022 with a sample size ranging from 27 to 89178. The proportion of married individuals was 55.4% (95% CI 50.1-60.5) for suicidal behavior, 52.7% (95% CI 44.5 – 60.7) for suicides, and 43.1 (95% CI 32.9 – 53.9) for suicide attempts. The proportion of married persons among suicide attempts varied significantly across countries (p=0.016) which was highest (61.8%; 95% CI: 57.2 – 66.2) in India, followed by Bangladesh (52.5%; 95% CI 41.8% - 62.9%) and Pakistan (45.1%; 95% CI 30.9 – 59.9). As the current study did not assess any cause-and-effect association, a cautious interpretation is warranted while considering married marital status as a risk factor.

In recent years, underwater exploration for deep-sea resource utilization and development has a considerable interest. In an underwater environment, the obtained images and videos undergo several types of quality degradation resulting from light absorption and scattering, low contrast, color deviation, blurred details, and nonuniform illumination. Therefore, the restoration and enhancement of degraded images and videos are critical. Numerous techniques of image processing, pattern recognition and computer vision have been proposed for image restoration and enhancement, but many challenges remain. This survey presents a comparison of the most prominent approaches in underwater image processing and analysis. It also discusses an overview of the underwater environment with a broad classification into enhancement and restoration techniques and introduces the main underwater image degradation reasons in addition to the underwater image model. The existing underwater image analysis techniques, methods, datasets, and evaluation metrics are presented in detail. Furthermore, the existing limitations are analyzed, which are classified into image-related and environment-related categories. In addition, the performance is validated on images from the UIEB dataset for qualitative, quantitative, and computational time assessment. Areas in which underwater images have recently been applied are briefly discussed. Finally, recommendations for future research are provided and the conclusion is presented.

Post-industrial recycling (PIR) and post-consumer recycling (PCR) are measures to sustain re-sources by improving materials’ circularity and sustainability. Currently, circularity is mostly measured as the degree of reutilization of a material from 0 to 100 % at product or company lev-el. This lacks in assessing the resources’ usage over multiple product life cycles. Therefore, we propose to assess circularity as (i) the frequency resources are used in products (effective circu-larity eC) and (ii) a vehicle to reduce virgin resource use and environmental impacts (environ-mentally efficient circularity eeC). Besides, to compare the environmental impacts of using recy-cled materials from PIR or PCR, we analyse their impact reduction potential (IRP) indicating the environmental benefits of recycling in relation to virgin material put onto the market. We demonstrate the suggested indicators for a case study material: polypropylene. For this polymer type, the eC ranges between 0.93 and 9.08 uses of the resource on average depending on collec-tion, sorting, and recycling rates. Likewise, the eeC ranges between 0.31 and 1.50 uses per kg of CO2 equivalents emitted. PCR has a higher IRP regarding climate change impacts than PIR in all analysed scenarios. The results reveal the relevance of PCR and PIR beyond the product life cycle.

Typhulaceae Jülich is one of the cold-adapted fungal families in basidiomycetes. Typhula (Pers.) Fr. and Pistillaria Fr. representing the family are distinguished from the morphology of a stipe to a hymenium (Fries 1821). The hymenium of Typhula is distinguishable from the stipe, but indistinguishable and consecutive in the genus Pistillaria. This taxonomic criterion is ambiguous, and consequently the opinion of Karsten (1882) has been widely accepted; I the genus Typhula, basidiomata develop from sclerotia, while basidiomata develop directly from substrata in the genus Pistillaris. But, Corner (1970) observed basidiomata of Pistillaria petasitis S. Imai in Hokkaido, Japan, from sclerotia. We collected irregular sclerotia of Typhula hyperborea H. Ekstr. from Upernavik, West Greenland. This specimen had a stipe-like structure on a Poaceae plant, and sclerotia developed on its tip. In August, P. petasitis in Hokkaido, Japan, formed basidiomata directly from substrates on the ground. Similar phenomena were found from other Typhula spp. in Japan. All of these fungi had the potential to produce sclerotia in culture, and as well as the capacity of mycelial growth at ambient air temperatures in each locality when samples were collected. These findings suggest that Typhula spp. developed basidiomata not only from the sclerotia dispersed by the basidiospores but also mycelia generated by the spore germination formed basidiomata multiple times depending on their growth environments.

Colombia is noteworthy as a biodiversity hotspot, featuring an extraordinary number of en-demic orchids, birds, and butterflies. This exploratory study examines the perceptions of desti-nation image considering the cognitive and affective image in predicting behavioral intentions of ecotourists through symmetric data analysis. Using Partial Least Squares (PLS), the author(s) analyzed 64 survey responses collected of rural areas, including a new 15 statement scale spe-cialized on birdwatching. The findings support the reliability of the model, symmetric analysis presents the higher influence of emotions and affections in increasing intentions of recommen-dation, considering birdwatching as based on personal relationships. Additionally, the cognitive image for the birders despite representing destination attributes or sets of destination resources of a mental picture does not have the same impact on behavioral intentions. Therefore, manag-ers should develop positioning strategies based on the generation of emotions, because bird-watching tourists seek to have more emotional experiences.

The aim of our study was to assess university students’ sleep quality and fatigue before and during the academic exam period and identify potential associated factors. A Web-based survey was completed by 940 students of 20 different Tertiary Institutions including demographics, sleep habits, exercise, caffeine, tobacco, alcohol use, subjective sleep quality (Pittsburgh Sleep Quality Index - PSQI) and fatigue (Fatigue severity scale – FSS) at the beginning of semester and at examination period. During exam period, PSQI (8.9 vs 6.1, p<0.001) and FSS scores (36.9 vs 32.7, p<0.001) were significantly elevated compared to pre-exam period. Increase of PSQI score was associated with age (β=0.111, p=0.011), presence of chronic disease (β=0.914, p=0.006), and depressive symptoms (β=0.459, p=0.001). Increase of FSS score was associated with female gender (β=1.658, p<0.001), age, (β=0.198, p=0.010), increase in smoking (β=1.7, p=0.029), coffee/energy drinks consumption (β=1.988, p<0.001), decreased levels of physical exercise (β=1.660, p<0.001), and depressive symptoms (β=2.526, p<0.001). In conclusion, our results show that sleep quality and fatigue are affected in university students during exam periods. Potential factors were identified which may lead to development of strategies for better quality of sleep, and wellbeing.

No system nor standardized analytical procedures at commercial laboratories exist to facilitate and accurately measure potential viable virus contamination in feed ingredients and complete feeds globally. As a result, there is high uncertainty of the extent of swine virus contamination in global feed supply chains. Many knowledge gaps need to be addressed to improve our ability to prevent virus contamination and transmission in swine feed. This review summarizes the current state of knowledge involving: 1) the need for biosecurity protocols to identify production, processing, storage, and transportation conditions that may cause virus contamination of feed ingredients and complete feed, 2) challenges of measuring virus inactivation, 3) virus survival in feed ingredients during transportation and storage, 4) minimum infectious doses, 5) differences between using a Food Safety Objective versus a Performance Objective as potential approaches for risk assessment in swine feed, 6) swine virus inactivation from thermal and irradiation processes, and chemical mitigants in feed ingredients and complete feed, 7) efficacy of virus decontamination strategies in feed mills, 9) benefits of functional ingredients, nutrients, and commercial feed additives in pig diets during a viral health challenge, and 10) considerations for improved risk assessment models of virus contamination in feed supply chains.

In globe artichoke both the edible portion and the waste biomass are recognized as valuable sources of bioactive compounds. For this study, heads with 30 cm-long floral stems, including 2-3 leaves, were harvested from five genotypes which included two traditional vegetatively-propagated varietal types (‘Brindisino,’ and ‘Violetto di Foggia,’) and three "seed"-propagated hybrids (‘Tempo,’ ‘Opal,’ and ‘Madrigal’). The study aimed to determine the total and individual polyphenolic concentrations (measured spectrophotometrically and by HPLC) and antioxidant activity (AA) in different artichoke parts, namely the "hearts" (H), head waste (HW), stem waste (SW), and leaf waste (LW). ‘Brindisino’ SW exhibited the highest accumulation of luteolin (26,317 mg kg−1 F.W.), while ‘Tempo’ H displayed the highest cynarin content (190 mg kg−1 F.W.). ‘Tempo’ HW and H showed the highest levels of apigenin (640 mg kg−1 F.W.), and the greatest source of chlorogenic acid was found in the HW of ‘Opal’ and the H of ‘Brindisino’ (4,300 mg kg−1 F.W.). The hybrids generally exhibited lower total polyphenolic concentrations than the traditional genotypes, particularly evident in the LW. The SW demonstrated the highest concentration of total polyphenols (18,000 mg kg−1 F.W.), followed by the edible H and non-edible HW (12,000 mg kg−1 F.W.), while the LW exhibited the lowest concentration (2,000 mg kg−1 F.W.). Interestingly, the AA did not precisely align with the total polyphenolic concentration, showing slight variations between the examined parts and genotypes.

Inspired by nature's examples such as lotus leaves and insect wings, superhydrophobic surfaces have been extensively studied and engineered. However, achieving superoleophobic surfaces, which repel oils, has proven to be more challenging due to the oils' lower surface tension than water. This article presents a novel, cost-effective technique for fabricating superoleophobic surfaces with enhanced durability. We demonstrate the effectiveness of this technique by using Perfluorooctyltriethoxysilane (PFOTES) and silicon dioxide nanoparticles on stainless steel mesh substrate. The resulting surfaces exhibit remarkable superoleophobic properties by incorporating re-entrant structures, low surface energy, and high surface roughness, making them ideal for oil-repellency applications.

All-solid-state lithium batteries (ASSLBs) using argyrodite electrolyte materials have shown promise for applications in electric vehicles (EVs). However, understanding the effects of pro-cessing parameters on the ionic conductivity of these electrolytes is crucial for optimizing battery performance and manufacturing methods. This study investigates the influence of electrolyte op-erating temperature, electrolyte operating pressure, electrolyte pelletization pressure, and electro-lyte pelletizing temperature on the ionic conductivity of Li6PS5Cl0.5Br0.5 argyrodite electrolyte (AmpceraTM, D50=10 µm). A specially designed test cell is employed for the experimental meas-urements, allowing for controlled pelletization and testing within the same tooling. The results demonstrate the significant impact of the four parameters on the ionic conductivity of the argy-rodite electrolyte. The electrolyte operating temperature has a more pronounced effect than oper-ating pressure, and pelletizing temperature exerts a greater influence than pelletizing pressure. This study provides graphs that aid in understanding the interplay between these parameters and achieving desired conductivity values. It also establishes a baseline for the maximum pelletizing temperature before undesirable degradation of electrolyte occurs. By manipulating the pelletizing pressure, operating pressure, and pelletizing temperature, battery engineers can achieve the desired conductivity for specific applications. The findings emphasize the need to consider operating conditions to ensure satisfactory low-temperature performance, particularly for EVs. Overall, this study provides valuable insights into processing and operating conditions for ASSLBs utilizing Li6PS5Cl0.5Br0.5 argyrodite electrolyte.

In this paper, a framework for simultaneous tracking and recognizing drone targets using a low-cost and small-sized millimeter-wave radar is presented. The radar collects the reflected signals of multiple targets in the field of view including drone and non-drone targets. The analysis of the received signals allows multiple targets to be distinguished because of the different reflection patterns. The proposed framework consists of four processes including signal processing, cloud points clustering, target tracking, and target recognition. Signal processing translates the raw signals into spare cloud points. These points are merged into several clusters, each representing a single target. Target tracking estimates the new locations of each detected target. A novel convolutional neural network model is developed for drone and/or non-drone targets feature extraction and recognition. For performance evaluation, a dataset collected with an IWR6843ISK mmWave sensor by Texas Instruments is used for training and testing the convolutional neural network. The proposed recognition model achieves an accuracy of 98.4% for one target and 98.1% for two targets.

This paper proposes an approach for image data extraction and driving behavior analysis using geographic information and driving data. Information derived from geographic and global positioning systems was used for image data extraction. In addition, we used an onboard diagnostic II and a controller area network bus logger to record driving data for driving behavior analysis. Driving behavior was analyzed using sparse automatic encoders and data exploration to detect abnormal and aggressive behavior. A regression analysis was used to derive the relationship between aggressive driving behavior and road facilities. Several traffic improvements were proposed for specific intersections and roads. The results indicate that lane ratios without lane markings and with straight lane markings are important features that affect aggressive driving behaviors.

The contemporary discourse focuses on the fourth industrial revolution and its impact on compa-nies. An explicative, quantitative, questionnaire survey was conducted with managers of 101 companies in Hungary and 54 in Austria. Our study focused on assessing their preparedness for Industry 4.0 and the key factors they take into account when implementing Industry 4.0 initiatives. We also examined whether there is a correlation between the areas in which companies have made improvements to support Industry 4.0. To complement our quantitative analysis, we conducted a series of four semi-structured interviews with two Hungarian and two Austrian companies. The aim of the interviews was to further investigate the digital readiness of companies and to formulate recommendations for companies venturing into the field of digitalisation. A particular focus was put on comparing the digital maturity of these two neighbouring Central European countries, given the significant differences in their digital maturity as shown by the macro indicators of the Digital Economy and Society Index (DESI). Therefore, we conducted a micro-level analysis to investigate the extent to which DESI scores correspond to the digital performance of companies at the orga-nisational level.

Multicomponent reactions (MCRs) have been used for more than a century; since their discovery in 1850 by Strecker. To date, MCRs route is regarded as a beneficial strategy due to its capacity to quickly produce molecular diversity and structural complexity of interest for a variety of applications. Despite having famous MRCs such as the Ugi, Passerini, Biginelli, and Hantzsch, this re-view portrays the importance of MCRs in the synthesis of desired products towards applications such as medicinal purposes, sustainable chemistry, and polymerisation. MCRs provide ad-vantages such as reducing the number of sequential multiple reactions to one step, atom economy, recyclable catalysts, mild conditions, preventing waste and reduce solvent use.

Background. Many anticancer drugs used in clinical practice cause adverse events such as oral mucositis, neurotoxicity, and extravascular leakage. We have reported that two 3-styrylchromone derivatives, 7-methoxy-3-[(1E)-2-phenylethenyl]-4H-1-benzopyran-4-one (compound A) and 3-[(1E)-2-(4-hydroxyphenyl)ethenyl]-7-methoxy-4H-1-benzopyran-4-one (compound B) showed the highest tumor-specificity against human oral squamous cell carcinoma (OSCC) cell lines among 291 related compounds. After confirming their superiority by comparing their tumor specificity with newly synthesized 65 derivatives, we investigated the neurotoxicity of these compounds, in comparison with 4 popular anticancer drugs. Methods: Tumor-specificity (TSM, TSE, TSN) was evaluated as the ratio of mean CC50 for human normal oral mesenchymal (gingival fibroblast, pulp cell), oral epithelial cells (gingival epithelial progenitor), and neuronal cells (PC-12, SH-SY5Y, LY-PPB6, differentiated PC-12) to OSCC cells (Ca9-22, HSC-2), respectively. Results: Compounds A and B showed one-order of magnitude higher TSM as compared with newly synthesized derivatives, confirming its prominent tumor-specificity. Docetaxel showed one order of magnitude higher TSM, but two order of magnitude lower TSE than compounds A and B. Compounds A and B showed higher TSM, TSE and TSN values than doxorubicin, 5-FU and cisplatin, damaging OSCC cells at concentrations that do not affect the viability of normal epithelial and neuronal cells. QSAR prediction based on the Tox21 database suggested that compounds A and B may inhibit the signaling pathway of estrogen-related receptors.

Hydrogel-based wearable electrochemical biosensors (HWEBs) are emerging biomedical devices that have recently received immense interest. The exceptional properties of HWEBs include excellent biocompatibility with hydrophilic nature, high porosity, tailorable permeability, the capability of reliable and accurate detection of disease biomarkers, suitable device-human interface, facile adjustability, and stimuli-responsive to the nanofiller materials. Although the biomimetic three-dimensional hydrogels can immobilize bioreceptors, such as enzymes and aptamers, without any loss in their activities. However, most HWEBs suffer from low mechanical strength and electrical conductivity. Many studies have been performed on emerging electroactive nanofillers, including biomacromolecules, carbon-based materials, and inorganic and organic nanomaterials, to tackle these issues. Non-conductive hydrogels and even conductive hydrogels may be modified by nanofillers as well as redox species. All these modifications have led to the design and development of efficient nanocomposites as electrochemical biosensors. In this review, both conductive-based and non-conductive-based hydrogels derived from natural and synthetic polymers are systematically reviewed. The main synthesis methods and characterization techniques are addressed. The mechanical properties and electrochemical behavior of HWEBs are discussed in detail. Finally, the prospects and potential applications of HWEBs in biosensing, healthcare monitoring, and clinical diagnostics are highlighted.

Compared to other 2D materials, MBenes are at an early stage in both experimental and theoretical approaches. However, the wide range of possible 2D structures leads to novel and challenging properties and their consequent applications. From all the possible stoichiometries, we have performed a theoretical study of orthorhombic and hexagonal M2B2 MBenes in the framework of the Density Functional Theory. We have found that both symmetries of Cr2B2, Fe2B2, and Zr2B2 show a metallic behavior and could be grown under certain conditions, as they are demonstrated to be dynamically stable. Moreover, the values of the magnetic moment, in specific ferromagnetic cases exceeding 2.5 μB/M2B2, make them suitable as robust 2D magnets. All our findings represent an important step in the understanding of MBenes and open several windows to future research in fields like energy conversion and storage, sensing, catalysis, biochemistry, or nanotechnology, among others.

The global trade and transportation sectors heavily rely on the maritime industry. Still, its dependence on fossil energy sources poses significant environmental challenges and leads to unstable fuel prices that affect the cost of goods transported by sea. This paper aims to evaluate the viability of seaports as energy-intensive entities and explore the feasibility of implementing a Nuclear-Renewable Hybrid Energy System (NRHES). The study presents a case study of the Tanjung Priok Port in Indonesia, focusing on estimating energy consumption, emissions, and the potential impact of carbon taxation on seaport operations. By quantifying these factors, the research provides insights into the energy requirements, environmental effects, and potential costs associated with seaport carbon taxation. A comprehensive analysis of the technical and economic feasibility of implementing an NRHES in the seaport case study is conducted, determining the optimal sizing and composition of components, considering the proportion of nuclear and renewable energy sources. Additionally, the economic analysis considers energy costs, net present cost, cash flow, return on investment, and internal rate of return. The findings aim to inform decision-makers about the benefits and challenges of adopting an NRHES, contributing to a cleaner and more sustainable future for the maritime industry.

New analytical solutions of the heat conduction equation are presented in cylindrical and spherical coordinates. Then these solutions are reproduced with high accuracy by recent explicit and unconditionally stable finite difference methods. After this, real experimental data from the literature regarding a heated cylinder are reproduced by the explicit numerical methods as well as by Finite Element Methods (FEM) ANSYS workbench. Convection and nonlinear radiation are also considered on the boundary of the cylinder, and it is shown that the explicit methods are much more accurate than the commercial software.

The fundamental objective is to study the application of multivariate sets of data in Gaussian distribution. This paper examines broad measurements of structure for both Gaussian and non-Gaussian distributions, which shows that they can be described in terms of the infor-mation-theoretic between the given covariance matrix and correlated random variables (in terms of relative entropy). In order to develop the multivariate Gaussian distribution with entropy and mutual information, several significant methodologies are presented through the discussion supported by illustrations, both technically and statistically. The content obtained allows readers to better perceive concepts, comprehend techniques, and properly execute software programs for future study on the topic's science and implementations. It also helps readers grasp the themes' fundamental concepts. Involving the relative entropy and mutual information as well as the potential correlated covariance analysis based on differential equations, a wide range of information is addressed, including basic to application concerns.

Different types of disasters, whether natural or human character, lead to the significant loss of human lives. In the latter case, the quick action of identification of corpses and human remains is mandatory. There are a variety of protocols to identify victims, however, genetics is one of the tools that allow an exact identification of the victim. However, several factors may interfere with this identification, from the biological samples’ degradation not allowing the analysis of nuclear information, to failure to dispose of biological samples from family members. Access to certain family members could be a determinant of the proper choice of genetic markers that allow the identification of the victim, or his/her inclusion in a given genetic maternal or paternal lineage. With the new advances in the genetic field, it is expected to allow soon the identification of victims from disasters only with his/her biological postmortem samples, being possible to draw a robot portrait and its most likely physical characteristics. In all cases, genetics is the only modern tool with universal character and can be used in essentially all biological samples, giving and identification of more or less accurate statistical character, depending on whether nuclear or lineage markers are used.

: Coffee is one of the most consumed beverages in the world; its production is based mainly on varieties of the Coffea arabica species. Mexico stands out for its specialty and organic coffee. In Guerrero the production is given by small indigenous community’s cooperatives that market their product as raw material. Official Mexican Standards stipulate the necessary requirements for its commercialization within the national ter-ritory. In this work, the physical, chemical, and biological characterizations of green, medium, and dark roasted beans from C. arabica varieties were carried out. Analysis of HPLC showed higher chlorogenic acid (55 mg/g) and caffeine (1.8 mg/g) contents in the green beans of the Bourbon and Oro Azteca varieties. The caffeine (3.88 mg/g) and melanoidins (97 and 29 mg/g) contents increased according to the level of roasting; a dissimilar effect was found in the chlorogenic acid content (14.5 mg/g). The adequate nutritional content and the sensory evaluation allowed the classification of dark roasted as premium coffee (84.25 points) and the roasted medium as specialty coffee (86.25 points). The roasted coffees presented antioxidant activity without cytotoxic effect. The results obtained will serve as a basis for making decisions on the improvements of the coffees analyzed.

In the semi-arid region of Brazil, it is common to use saline or brackish water for crop production. However, this practice can negatively affect the soil, nutrient balance, and fruit quality and production. From this perspective, this study aimed to evaluate the effect of fertilization combinations with nitrogen (N), phosphorus (P), and potassium (K) on the production and quality of West Indian cherry grown under salt stress in the second year of production. The study was conducted in a protected environment following a randomized block design with treatments distributed in a 2 x 10 factorial arrangement referring to two levels of electrical conductivity of irrigation water (ECw) (0.6 and 4.0 dS m-1) and 10 NPK fertilization combinations (80-100-100; 100-100-100; 120-100-100; 140-100-100; 100-80-100; 100-120-100; 100-140-100; 100-100-80; 100-100-120 e 100-100-140% of the recommendation in the second year of production), with three replicates and one plant per lysimeter. The results indicate that irrigation of West Indian cherry crop irrigation at the water salinity of 4.0 dS m-1 negatively affected all fruit production variables. The interaction between the ECw of 0.6 dS m-1 and the 100-80-120 NPK fertilization combination increased the total number of fruits and the total fruit weight of West Indian cherry.

A printed Vivaldi antenna that is optically transparent, ultra-wideband (UWB), and reconfigurable has been developed, fabricated, and tested at millimeter wave frequencies. It covers a broad frequency range of 20-30 GHz by using three PIN diodes. The diodes control the current flow to direct the beam of the antenna. The results of numerical simulations and measurements match at millimeter wave frequencies. The design of this antenna is unique as it allows for a reduction in size and ease of integration while also providing the ability to change the radiation pattern by up to 300 degrees, making it suitable for 5G and 6G communications. Additionally, this antenna can also be useful for RF applications that require dynamic switching of radiation patterns and cognitive radio.

The Infectious and Tropical Diseases Department of University of Brescia organized free rapid screening tests for HIV and HCV as part of the Fast Track City commitment. A cross-sectional study was conducted, consisting of an anonymous, multiple-choice questionnaire that was administered to individuals who underwent the screening or consultation. The study aimed to compare knowledge and attitudes towards HIV and HCV between age groups (18-40 vs. >40) and sexual orientations (heterosexual vs. LGBTQ+). Overall, 333 questionnaires were completed. Individuals over the age of 40 and those who identified as heterosexual had the lowest level of knowledge about HIV transmission (7.9% and 30% respectively), undetectable=untransmittable (19.7% and 39.4% respectively) and PrEP (9.2% and 18.2% respectively). They were also less willing to cohabit with people with HIV (PLHIV). Only 9.6% of the population demonstrated high levels of knowledge for both HIV and HCV. People over the age of 40 had the largest gaps in knowledge and would benefit the most from educational and prevention interventions.

Blood testing is a crucial medical application. In this study, we applied Raman spectroscopy to test blood samples and obtained complete biological information, including the main components and compositions in these samples. Short-wavelength (532-nm green light) Raman scattering spectroscopy was conducted on samples of normal blood, abnormal blood in 3 types of preparation including whole blood, plasma, and serum, and the underlying information reflected by the biological characteristics detected in each sample type were analyzed. Raman spectroscopy results indicated that normal blood had high hemoglobin content, which suggests that hemoglobin is a major component of blood. Hemoglobin affects blood oxygen level. The characteristic peaks of hemoglobin were observed at 690, 989, 1015, 1182, 1233, 1315, and 1562–1649 cm−1. Analysis of plasma and serum samples indicated the presence of β-carotene, which exhibited characteristic peaks at 1013, 1172, and 1526 cm−1. In addition, surface-enhanced Raman spectroscopy was used to collect biological signals that are difficult to obtain in conventional Raman spectroscopy, including those of small molecules such as hormones, antibodies, and enzymes. Changes in biological information collected in this manner can be used as a basis for potentially diagnosing clinical diseases.

Internationalization and alternative ways for strategic management have been an objective for stakeholders in cultural industry, especially after COVID-19 pandemic crisis. During the past years “internationalization” has been almost exclusively related with promoting creation or content to larger audiences. Such a strategy seemed sufficient, even if empirical data did not always support such a belief. Technological progress and costs reduction in developing Virtual Reality (VR) and Augmented Reality (AR) applications, provides to cultural industry the opportunity to reach global audiences and to enrich their experience. Current research provides evidence about developing VR and AR tools that can act as internationalization facilitators when it comes to cultural industry. Research conducted during “VARSOCUL” project funded by the European Regional Development Fund (ERDF) as part of the Greek National Scope Action entitled "RESEARCH-CREATE-INNOVATE". The project’s main result, alongside with VR and AR tools developed are presented.

Community-acquired pneumonia (CAP) is among the most common causes of death and one of the leading healthcare concerns worldwide. It can evolve into sepsis and septic shock, which have a high mortality rate, especially in critical patients and comorbidities. The definitions of sepsis were revised in the last decade as “life-threatening organ dysfunction caused by a dysregulated host response to infection”. Procalcitonin (PCT), C-reactive protein (CRP), and complete blood count including white blood cells are among the most commonly analyzed sepsis-specific biomarkers also used in pneumonia in a broad range of studies. It appears to be a reliable diagnostic tool to expedite care of these patients with severe infections in the acute setting. PCT was found superior to most other acute phase reactants and indicators, including CRP as a predictor of pneumonia, bacteremia, sepsis and poor outcome. In addition, PCT use is beneficial to judge timing for cessation of antibiotic treatment in most severe infectious states. The clinicians should be aware of strengts and weaknesses of known and potential biomarkers in expedient recognition and management of severe infections. This manuscript is intended to present an overview of the definitions, complications and outcomes of CAP and sepsis, with special regard to PCT and other important markers.

Curcuma longa is only a rich source of curcumin (1) and its major analogues demethoxycurcumin (2) and bisdemethoxycurcumin (3) among the Curcuma species. The content ratio of these three curcumins in turmeric is depended on the varieties and growing environment. Recently, curcumin (1) has been reported as potential inhibitor of hepatic and enzymatic protein tyrosine phosphatase 1B (PTP1B) and its related disorders such as hypertriglyceridemia, hyperlipidemia and liver steatosis. Thus, we further purified curcumins (1–3) from C. longa and investigated their inhibitory effects against PTP1B and α-glucosidase enzymes. As the result, curcumins (1–3) exhibited potential PTP1B inhibition with IC50 values of 37.8 ± 1.4, 45.3 ± 0.7, and 72.6 ± 1.1 μM, respectively, and α-glucosidase inhibition with similar manner (IC50 values of 78.2 ± 0.2, 82.4 ± 0.6, and 90.6 ± 1.0 μM, respectively). These results reveal a key role of methoxylation in the variation of PTP1B and α-glucosidase inhibitory activity for these curcumins. In addition, density functional theory (DFT) was used accompanying with molecular docking (MD) to analyze the ligand stability and the interaction of curcumins (1–3) with PTP1B and glucoside hydrolase proteins. Assay-based results and the MD data obtained are highly correlation suggesting that the deterioration of the enzyme activity caused by the distortion of structural conformation of PTP1B and glucoside hydrolase may be related to the arrangement of amino acids in protein structure. This reported for the first time that inhibitory effects of curcumins (1–3) against PTP1B and glucoside hydrolase have been examined in vitro and in silico as well.

7α- and 7β-hydroxysteroid dehydrogenases (HSDH) are a pair of enzymes that can catalyze the isomerization of hydroxyl group at site 7 of bile acids. In previous study, we found that the activities of 7α- and 7β-HSDH can be inhibited by bilirubin. In order to clarify the impact, the effects of bilirubin on enzymes were studied by kinetics, spectrum and docking analysis. Relative activity of 7α-HSDH remained less than 40 % under 1 mM bilirubin, for 7β-HSDH, only 18 % activity left at the same condition. Using taurochenodeoxycholic acid (TCDCA) as substrate, the Km of 7α-HSDH was up to 0.63 mM from 0.24 mM after binding with bilirubin, the Km of 7β-HSDH rose from 1.14 mM to 1.87 mM for the catalysis of tauroursodeoxycholic acid (TUDCA). The affinity of 7α- and 7β-HSDH to substrate decreased with the effect of bilirubin. The binding of bilirubin with 7α- or 7β-HSDH were analyzed by UV–Vis spectra, Fluorescence spectra and Circular dichroism (CD) spectra. The results reflected that bilirubin caused a slight change in the secondary structure of 7α- or 7β-HSDH, and the changes were correlated with the ratio of bilirubin to enzyme. 10 candidate molecular docking results were presented to reflect the binding of bilirubin with 7α- or 7β-HSDH and to explore the inhibition mechanism. This research not only provides the more in-depth understanding of 7α- and 7β-HSDH, but also reminds us to avoid the inhibition of bilirubin on hydroxysteroid dehydrogenases.

As a fundamental, overall, and strategic issue facing human society, human migration is a key factor affecting the development of countries and cities given constantly changing population numbers. The fuzziness of the spatiotemporal attributes of human migration limits the pool of open-source data for human migration prediction, leading to a relative lag in human migration prediction algorithm research. This study expands the definition of human migration research, reviews the progress of research into human migration prediction, and classifies and compares human migration algorithms based on open-source data. It also explores the critical uncertainty factors restricting the development of human migration prediction. Given the effect of human migration prediction, in combination with artificial intelligence and big data technology, the paper concludes with specific suggestions and countermeasures aimed at enhancing human migration prediction research results to serve economic and social development and national strategy.

This paper presents the symmetries of differential equations associated with one-variable and Bivariate Hermite polynomials by proposing a representation of Lie algebra for these differential operators. Applying the Baker-Campbell-Hausdorff formula to these algebras, results in new relations and generating functions in one-variable and Bivariate Hermite polynomials. A general form of representation for other orthogonal polynomials such as Laguerre polynomials is introduced.

Preclinical studies have identified glial cells as pivotal players in the genesis and maintenance of neuropathic pain after nerve injury associated with diabetes, chemotherapy, major surgeries, and virus infections. Satellite glial cells (SGCs) in the dorsal root and trigeminal ganglia of the peripheral nervous system (PNS) and astrocytes in the central nervous system (CNS) express similar molecular markers and are protective under physiological conditions. They also serve similar functions in the genesis and maintenance of neuropathic pain, downregulating some of their homeostatic functions and driving pro-inflammatory neuro-glial interactions in the PNS and CNS, i.e. “gliopathy”. However, the role of SGCs in neuropathic pain is not simply as “peripheral astrocytes”. We delineate how these peripheral and central glia participate in neuropathic pain by producing different mediators, engaging different parts of neurons, and becoming active at different stages following nerve injury. Finally, we highlight the recent findings that SGCs are enriched with proteins related to fatty acid metabolism and signaling such as Apo-E, FABP7, and LPAR1. Targeting SGCs and astrocytes may lead to novel therapeutics for the treatment of neuropathic pain.

The contribution of genetic and environmental factors to the pathophysiology of cerebral aneurysms in monozygotic twins is under-reported and presents ambiguous arguments. The morphology and hemodynamics of neurovascular arteries in a pair of monozygotic twins (MTs) were investigated to reveal the underlying mechanisms. Four arterial models were reconstructed for the twin A-right brain and left brain, twin B-left brain, and B-left brain without anterior cerebral arteries based on preclinical scanned information. Subsequently, the dimensions, configurations and outlined curves of the three-perspective geometries were compared between the MTs. Adopting an in-vitro validated numerical cerebral aneurysm model, hemodynamic patterns were investigated and compared in the MT models, respectively. Morphological comparisons of the MTs show the size and shape of cerebral arteries exist significant differences, despite of the expected genetic similarities. These differences can be attributed to variations during embryological development and external environmental influences. Qualitatively and generally, numerical results indicate the MTs have some hemodynamic similarities (e.g., time-averaged pressure (TAP) distributions (~13400 Pa), and oscillatory shear index (0~0.49), but present significant differences in specific local arteries due to morphological variances. Specifically, the difference in the volumetric blood flow rate in corresponding arteries between the MTs is from 16% (smallest) in anterior choroidal artery (AChA) to 221% (largest) in the ophthalmic artery (OphA), varying with specific compared arteries. Also, the registered hemodynamic indicators, such as the maximum time-averaged wall shear stress (TWSS) (53.6 Pa vs. 37.8 Pa), and different local OSI distributions were observed between the MTs. The findings revealed that morphological variations in MTs could be generated by embryological and environmental factors, thus assuming they share the identical morphology in cardiovascular and neurovascular systems may lead to significant misevaluations in hemodynamics quantifications and further lesions.

In recent years, the production of renewable energy represents one of the main challenges of modern and future society. The new cultivation method called Agrivoltaic (hereafter AV), combines and associates agricultural production and renewable energy (photovoltaic) production in a collaborative synergy from which both benefit. In this study, the dry matter and essential oils yield of six medicinal species (Salvia officinalis L., Origanum vulgare L., Rosmarinus officinalis L., Lavendula angustifolia L., Thymus citriodorus L. and Mentha spicata L.) grown underneath a dynamic AV system in comparison to those in full sun (T), were evaluated. In particular, below the dynamic AV system, due to the rotation of the panels, two plot areas on the ground were distinguished: one always covered by the panels (UP), and another one covered alternatively (BP). During the aromatic crop cycles, the solar radiation, infrared leaf temperature and air temperatures in UP, BP and T plot, were measured. In addition, at harvest time, weed survey was carried out. The results showed that, in general, the solar radiation and infrared leaf temperature were lower in UP plot than in either the BP and T plots, while the air temperatures were similar in all compared plots. Also the weed cover percentage was lower in the UP plot than other ones. The essential oils yield in the sage, thyme, mint and rosemary plants were higher in both UP and BP plots than for T plot. Thus, shading and/or less weed infestation may have been the main factors favorably influencing the performance of medicinal crops under a dynamic AV system.

Patients with COVID-19 demonstrate higher rates of cardiovascular complications, including thromboses and thromboembolism. One may suppose that the action of SARS-CoV-2 transforms stable atherosclerotic plaques into unstable status. Cardiovascular complications in COVID-19 may be caused by progressive viral alteration the blood vessels, including vasa vasorum. A lethal case of ischemic brain disease caused by cerebral atherosclerosis and exacerbated with a stroke during COVID-19 infection is briefly described. The results of autopsy showed perivascular lymphocytic infiltration and signs of vasa vasorum vasculitis with thrombi of adventitial microvasculature. The data discussed in the article are interpreted in context of the concept giving the important role in atherogenesis to vasa vasorum.

There is evidence that behavioral risk factors such as western type diet, and life style can predispose to oxidative stress, deficiency in antioxidant status, hyperglycemia, dyslipidemia and increase in inflammation in tissues of various organs: beta cells of the pancreas, LDL receptors in the hepatocytes, endothelium, neurons, osteocytes and gut. Further studies indicate that diets rich in antioxidant flavonoids, omega-3 fatty acids and fiber in foods were inversely associated whereas western-type foods were positively associated with risk of mortality due to cardiovascular diseases (CVDs). One important cause for beneficial effects of diet may be certain foods and nutrients such as vegetables, fruits and whole grains that are rich in fiber and flavonoids, known to produce liters og molecular hydrogen in the gut. It seems that, high-fiber diets, prebiotic and probiotics can produce greater hydrogen, which acts as an antioxidant and may inhibit free radical generation. Recent studies indicate that molecular hydrogen can inhibit hydroxyl and nitrosyl radicals and can directly act as antioxidant in the cells and tissues, which can cause marked decline in oxidative stress and inflammation leading to significant decline in CVDs and metabolic diseases. Clinical and experimental studies indicate that hydrogen therapy such as hydrogen rich water can provide benefits in the management of CVDs and metabolic diseases. Larger studies are necessary to verify the role of hydrogen administration in CVDs.

The population of Bifidobacterium spp in faecal samples from breast-fed and formula-fed infants were investigated and developed antibiogram. The common bacterial growth media such as Man Rogos Sharpe (MRS), Brain Heart Infusion (BHI), Luria Bertani (LB) broth and Bifidobacteria agar were evaluated by the enumeration of Bifidobacterium spp. in faecal material. The results demonstrated that the population of Bifidobacterium spp. in the faecal samples of breast-fed infants is numerically high and, low in formula-fed infants. Phylogenetic analysis of the 16S rRNA, (Xylose/Fructose-6-phosphate phosphoketolase) xfp, and RFLP map of Bifidobacteria isolates suggested a presence of possible new and different Bifidobacterium spp. The intensity of the reddish brown colour formed during the f6ppk (Fructose-6-phosphate phosphoketolase) assay confirms the presence of variable Bifidobacteria. The highest recovery and diversity of Bifidobacteria were obtained from Bifidobacteria agar media. Growth in various media resulted in the formation of small (SCV) and big colony variants (BCV). We understand that the various antibiotic minimum inhibitory concentration (MIC) values obtained by applying different media, growth conditions, after bile salt treatment, and at low pH can vary. This study concludes that the variation of microbiological conditions differentiating resistant and susceptible strains is influenced by the test conditions as well.

In this research, assume a SuperHyperGraph. Then a “SuperHyperForcing” Z(NSHG) for a neutrosophic SuperHyperGraph NSHG : (V,E) is the minimum cardinality of a SuperHyperSet S of black SuperHyperVertices (whereas SuperHyperVertices in V (G) \ S are colored white) such that V (G) is turned black after finitely many applications of “the color-change rule”: a white SuperHyperVertex is converted to a black SuperHyperVertex if it is the only white SuperHyperNeighbor of a black SuperHyperVertex; a “neutrosophic SuperHyperForcing” Zn(NSHG) for a neutrosophic SuperHyperGraph NSHG : (V,E) is the minimum neutrosophic cardinality of a SuperHyperSet S of black SuperHyperVertices (whereas SuperHyperVertices in V (G) \ S are colored white) such that V (G) is turned black after finitely many applications of “the color-change rule”: a white SuperHyperVertex is converted to a black SuperHyperVertex if it is the only white SuperHyperNeighbor of a black SuperHyperVertex. Assume a SuperHyperGraph. Then a “SuperHyperForcing” Z(NSHG) for a neutrosophic SuperHyperGraph NSHG : (V,E) is the minimum cardinality of a SuperHyperSet S of black SuperHyperVertices (whereas SuperHyperVertices in V (G) \ S are colored white) such that V (G) is turned black after finitely many applications of “the color-change rule”: a white SuperHyperVertex is converted to a black SuperHyperVertex if it is the only white SuperHyperNeighbor of a black SuperHyperVertex; a “neutrosophic SuperHyperForcing” Zn(NSHG) for a neutrosophic SuperHyperGraph NSHG : (V,E) is the minimum neutrosophic cardinality of a SuperHyperSet S of black SuperHyperVertices (whereas SuperHyperVertices in V (G) \ S are colored white) such that V (G) is turned black after finitely many applications of “the color-change rule”: a white SuperHyperVertex is converted to a black SuperHyperVertex if it is the only white SuperHyperNeighbor of a black SuperHyperVertex. Assume a SuperHyperGraph. Then an “δ−SuperHyperForcing” is a minimal SuperHyperForcing of SuperHyperVertices with minimum cardinality such that either of the following expressions hold for the (neutrosophic) cardinalities of SuperHyperNeighbors of s ∈ S : |S∩N(s)|>|S∩(V \N(s))|+δ, |S∩N(s)|<|S∩(V \N(s))|+δ.Thefirst Expression, holds if S is an “δ−SuperHyperOffensive”. And the second Expression, holds if S is an “δ−SuperHyperDefensive”; a“neutrosophic δ−SuperHyperForcing” is a minimal neutrosophic SuperHyperForcing of SuperHyperVertices with minimum neutrosophic cardinality such that either of the following expressions hold for the neutrosophic cardinalities of SuperHyperNeighbors of s ∈ S : |S ∩ N(s)|neutrosophic > |S ∩ (V \ N (s))|neutrosophic + δ, |S ∩ N (s)|neutrosophic < |S ∩ (V \ N (s))|neutrosophic + δ. The first Expression, holds if S is a “neutrosophic δ−SuperHyperOffensive”. And the second Expression, holds if S is a “neutrosophic δ−SuperHyperDefensive”. It’s useful to define “neutrosophic” version of SuperHyperForcing. Since there’s more ways to get type-results to make SuperHyperForcing more understandable. For the sake of having neutrosophic SuperHyperForcing, there’s a need to “redefine” the notion of “SuperHyperForcing”. The SuperHyperVertices and the SuperHyperEdges are assigned by the labels from the letters of the alphabets. In this procedure, there’s the usage of the position of labels to assign to the values. A basic familiarity with SuperHyperGraph theory and neutrosophic SuperHyperGraph theory are proposed.

The final assembly of appliances and automotive industries is a rigorous process, that has limited capabilities of full traceability associated with: (1) the parts installed, (2) their fabrication processes, and (3) the assembly work. This is also the case for each of its sub-assemblies The many parts and sub-assemblies that compose the final assembly, make full traceability a challenging fit, that is almost unsurmountable. Such full traceability along the entire supply-chain is not existent today and must be based on documentation of most assembled parts, assembly tasks, and inspection tasks that compose the full assembled product. In addition, security measures are needed to prevent hostile hacking and unauthorized approach to the assembly documentation throughout the entire supply chain. The related documentation and repeated verifications require considerable effort and have many chances for human errors. So, automating these processes has a great value. This article expounds a framework that harnesses block-chain and smart-contract technology to offer traceable and protected documentation of the assembly process. We expand the concept of a Bill-Of-Assembly (BOA) to incorporate data from the bill of materials (BOM), the associated assembly activities, the associated activities’ specification parameters and materials, and the associated assembly resources (machines and/or operators). The paper defines the operation of the BOA with blockchain and smart-contract technology, for attaining full traceability, safety, and security, for the entire assembled product. Future research could extend the proposed approach to facilitate the usage of the BOA data structure in constructing a digital twin of the entire simulated system.

Background: Participation is low (43%) in Australia’s National Bowel Cancer Screening Program which provides a biennial Fecal Immunochemical Test kit mailed to the home of Australians aged 50-74 years. While several factors for non-participation have been identified, the role of mental and physical health on screening behaviour has not been assessed. Methods: Participants of the Australasian Colorectal Cancer Family Registry Cohort were asked to complete a questionnaire on their colorectal cancer screening in the past five years and a validated measure of mental and physical health. The association between mental and physical health and screening was determined for Australian participants aged 45-75 years who had never been diagnosed with colorectal cancer. Multivariable logistic regression was used to adjust for measured potential confounders. Results: Of the 1130 eligible participants, 819 reported colorectal cancer screening in the past five years (72%). After adjusting for potential confounders, there was no evidence that overall mental or physical health was associated with colorectal cancer screening. However, one specific scale, general health, was positively associated with colorectal cancer screening (p=0.014) with those reporting higher levels of general health undergoing screening.Conclusion: We found limited evidence that mental and physical health, as measured by a short questionnaire, are associated with colorectal cancer screening. A potential limitation is reverse causation where previous screening may have impacted mental or physical health. A more detailed study of physical and mental health as barriers or enablers of screening is needed.

The solid particle erosion at room and elevated temperatures of pure and filled hot-curing epoxy resin on anhydride hardener was experimentally tested using accelerated method on special bench. Micro-sized dispersed industrial wastes were used as fillers: fly-ash from a power plant and spent filling material from a copper mining and processing plant. The results showed that the unfilled resin wear significantly decreases with increasing temperature, while the dependence on the temperature of the wear intensity at an impingement angle of 45o is linear inversely proportional, and at an angle of 90o non-linear. The decrease in wear intensity is probably due to an increase in elasticity (an increase in the fracture strain limit) because of heating. Solid particle erosion of the examined filled epoxy compounds is considerably higher than that of unfilled compounds at impingement angles of 90o and 45o. Filled compounds showed ambiguous dependences of intensity of wear from temperature (especially at an angle of attack 45o), probably, character of dependence is defined by a filler share and the structural features of the samples caused by distribution of particles of the filler. Intensity of wear of the considered compounds at impingement angles 90o and 45o has high direct correlation with density and the modulus of elasticity (i.e., increases with their increase), and low correlation with bending strength of the considered materials. The data set for determining the correlation between mechanical properties and wear included characteristics due to both compound filling and test temperature.

The soil and groundwater of Bhagobangola I block of Murshidabad district, West Bengal, India is severely arsenic contaminated. A bacterium was isolated from the garden soil of Mahishasthali village, which could tolerate 36.49 mM arsenic (III), 280.44 mM arsenic (V) and 63 mM chromium (III), which makes it arsenic (III & V) and chromium (III) hyper-tolerant bacterium. The growth pattern of this bacterium does not show much alteration in presence of 10 mM arsenic (III) and chromium (III), emphasizing its resistance to these heavy metals. Scanning electron microscopy depicted the size of this bacterium to be ~1.45 µm. 16S rDNA sequencing followed by subsequent phylogenetic analysis established the identity of this bacterium as Microbacterium paraoxydans. The bacterium is capable of bioremediation of arsenic and showed 30.8% & 22.6%, and 35.2% and 30.5% of bioremediation over a period of 24 and 48 hours in 1 mM and 4 mM arsenite, respectively. Microbacterium paraoxydans also exhibit plant growth promoting properties like nitrogen fixation, phosphate solubilization, indole-3-acetic acid production and production of siderophores. Therefore, the heavy metal resistance, bioremediation potential and plant growth promoting potential of the bacterium could be utilized not only for reduction of arsenic toxicity in soil and groundwater but also for plant growth promotion by using it as a biofertilizer.

Data on helminth parasites and epizoites is presented for the long-beaked and short-beaked common dolphins from the Southeast Pacific. Sampling in 1985-2000 was conducted mainly at six fishing ports in Peru and Ecuador where cetaceans were landed. From a total of 473 common dolphins sampled, we identified helminths including three species of Trematoda: Nasitrema globicephalae, Pholeter gastrophilus and Braunina cordiformis; three species of Nematoda, which includes Anisakis spp., Crassicauda sp. and Halocercus sp.; and two cestodes Tetrabothrius forsteri and Clistobothrium delphini (formerly Phyllobothrium delphini). No acanthocephalans were observed. No statistically significant sexual and ontogenetic variation in helminth prevalence was detected after which samples were pooled. The highest prevalence in the long-beaked common dolphin (n=440) was observed for N. globicephalae (96.3%) in cranial sinuses, Crassicauda sp. (83.3%) in mammary glands, Crassicauda sp. (78.8%) infesting the cranial sinuses, followed by Cl. delphini (28.6%) in the blubber and P. gastrophilus and B. cordiformis (20.4%) in the digestive tract. Although comparative testing was unfeasible due to minimal samples of short-beaked common dolphin (n=33), several of the same helminth species were found, but not N. globicephalae nor B. cordiformis. No cyamids were encountered while pseudo-stalked barnacles Xenobalanus globicipitis were common. No new (global) helminth host records are revealed for common dolphins, but this study presents a first checklist of parasites separately for the Southeast Pacific long-beaked and short-beaked common dolphins. Future work should include exhaustive laboratory-based necropsies, enhanced sampling of the short-beaked form, focus on intermediate hosts and parasitic pathology, including potential human health impact from consumption of small cetaceans.

The study shows that the volumes and surfaces of the $n$-simplices, $n$-orthoplices, $n$-cubes, and $n$-balls are holomorphic functions of $n$, which makes those objects omnidimensional. Furthermore, the volume of an $n$-simplex is shown to be a bivalued function of $n$, and thus the surfaces of $n$-simplices and $n$-orthoplices are also bivalued functions of $n$. Applications of these formulas to the omnidimensional polytopes inscribed in and circumscribed about $n$-balls reveal previously unknown properties of these geometric objects in negative dimensions. In particular, for $0 < n < 1$, the volumes of the omnidimensional polytopes are larger than those of circumscribing $n$-balls, while their volumes and surfaces are smaller than the volumes of inscribed $n$-balls. Reflection relations around $n = 0$ for volumes and surfaces of these polytopes inscribed in and circumscribed about $n$-balls are disclosed. Specific products and quotients of volumes and surfaces of the omnidimensional polytopes and $n$-balls are shown to be independent of the gamma function.

In this review paper, the occurrence in the plant kingdom and the biological activities associated to two specific phenyl-ethanoid glycosides i.e., leucosceptoside A and leucosceptoside B, were shown and discussed. This is the first work ever done on such subject. Analysis of the literature data clearly indicates that leucosceptoside A is much more common in plants and exerts many more biological activities than leucosceptoside B even if this also presents some important elements. All of this was widely discussed in this paper.

Connected and Autonomous Vehicle (CAV) combines technologies of autonomous vehicle (AV) and connected vehicles (CV) to develop quicker, more reliable and safer traffic. Artificial Intelligence (AI) based CAV solutions play significant roles in sustainable city. The convergence imposes stringent security requirements for CAV safety and reliability. In practice, vehicles are developed with increased automation and connectivity. Increased automation increases the reliance on the sensor-based technologies and decreases the reliance on driver; increased connectivity increases the exposures of vehicles vulnerability and increases the risk for an adversary to implement a cyber-attack. Much work has been dedicated to identifying the security vulnerabilities and recommending mitigation techniques associated with different sensors, controllers, and connection mechanisms, respectively. However, there is an absence of comprehensive and in-depth studies to identify how the cyber-attacks exploit the vehicles vulnerabilities to negatively impact the performance and operations of CAV. In this survey, we set out to thoroughly review the security issues introduced by AV and CV technologies, analyze how the cyber-attacks impact the performance of CAV, and summarize the solutions correspondingly. The impact of cyber-attacks on the performance of CAV is elaborated from both viewpoints of intra-vehicle system and inter-vehicle system. We pointed out that securing the perception and operations of CAV would be the top requirement to enable CAV to be applied safely and reliably in practice. Also, we suggested to utilize cloud and new AI methods to defend against smart cyber-attacks on CAV.

Bicycling is a tremendously efficient means of transportation both in socio-economic and environmental sustainability parameters. Therefore, they are fast becoming the primary mode of transportation in some other parts of Africa. Quelimane is a city which is found in Mozambique where bicycle-taxi is a major means of transportation. However, very little is known about the social and economic profiles of these city bicycle-taxi riders. Hence, the aim of this study was to determine the socio demographic and economic profile of bicycle-taxi riders. A cross-sectional study survey using a simple random probabilistic sample (n = 357, α = 0.05) was conducted. The questionnaire consisted of 20 items in five major groups, sociodemographic, economics, riding factors, safety and motivational factors. Pearson Chi square, t test and linear regression tests were carried out to test for statistical analysis. The activity is carried out mostly by males (98.9 %), under the age of 35 years. Their academic records, ranking highest, with secondary education background, bicycles are obtained through rental programs in order to perform taxing. After expenses, daily earnings generate a total revenue of USD 5.75. Sex, marital status, house type, years riding, bicycle make and meal per day, are associated with daily revenue income. Bicycle-taxi activity in Quelimane is an income generating activity. Mainly young citizens are involved due to the high unemployment rate. Nonetheless, bicycle taxing created an untapped market for self-employment, where the majority of youths in Quelimane generate their own revenue, thereby improving their livelihood.

This paper develops a two-layer optimization approach that provides energy-optimal control for vehicles and traffic signal controllers. The optimizer in the first layer computes the traffic signal timings to minimize the total energy consumption levels of approaching vehicles from upstream traffic. The traffic signal optimization can be easily implemented in real-time signal controllers, and it overcomes the issues in the traditional Webster’s method of overestimating the cycle length when the traffic volume-to-capacity ratio exceeds 50 percent. The second layer optimizer is the vehicle speed controller, which calculates the optimal vehicle brake and throttle levels to minimize the energy consumption of individual vehicles. The A-star dynamic programming is used to solve the formulated optimization problem in the second layer to expedite the computation speed so that the optimal vehicle trajectories can be computed in real-time and can be easily implemented in simulation software for testing. The proposed integrated controller is first tested on an isolated signalized intersection, and then an arterial network with multiple intersections to investigate the performance of the proposed controller under various traffic demand levels. The test results demonstrate that the proposed integrated controller can greatly improve energy efficiency with fuel savings up to 17.7%, at the same time enhancing traffic mobility by up to 47.18% reduction in traffic delay and up to 24.84% reduction in vehicle stops.

Due to the digitization and Internet of Things revolutions, the present electronic world has a wealth of cybersecurity data. Efficiently resolving cyber anomalies and attacks is becoming a growing concern in today's cyber security industry all over the world. Traditional security solutions are insufficient to address contemporary security issues due to the rapid proliferation of many sorts of cyber-attacks and threats. Utilizing artificial intelligence knowledge, especially machine learning technology, is essential to providing a dynamically enhanced, automated, and up-to-date security system through analyzing security data. In this paper, we provide an extensive view of machine learning algorithms, emphasizing how they can be employed for intelligent data analysis and automation in cybersecurity through their potential to extract valuable insights from cyber data. We also explore a number of potential real-world use cases where data-driven intelligence, automation, and decision-making enable next-generation cyber protection that is more proactive than traditional approaches. The future prospects of machine learning in cybersecurity are eventually emphasized based on our study, along with relevant research directions. Overall, our goal is to explore not only the current state of machine learning and relevant methodologies but also their applicability for future cybersecurity breakthroughs.

Zingiber cassumunar Roxb. is a powerful medicinal plant that has been used as traditional medicine to cure respiratory problems, pain, and inflammation in China, Indonesia, Thailand and other Asian countries by using the crude extracts. The objective of this research is to identify phytochemical composition of Z. cassumunar Roxb. and to analyze antibacterial activity of crude extract, purified compounds, and their microencapsulated products of Rhizome Z. cassumunar Roxb. Identification of phytochemical composition in crude extract of rhizome Z. cassumunar Roxb. was achieved by chromatography-mass spectrophotometer. The major phytochemical composition in crude extract of Z. cassumunar Roxb. is essential oils, including terpinen4-ol (37.7%), β-pinene (20.8%), and (E)-1-(3,4-dimethoxyphenyl)but-1-ene (13.3%). Crude extract of Z. cassumunar Roxb. was purified with silica gel flash column chromatography, resulting two purified compounds. The antibacterial activity of crude extract, purified compounds, and their microencapsulated products of Rhizome Z. cassumunar Roxb. were evaluated against agricultural and foodborne pathogens by using disc agar diffusion and broth microdilution techniques. All of the samples studied (crude extracts, purified compounds, and microencapsulated of Z. cassumunar Roxb.) were effective against all the bacteria. Based on the results of the disc-diffusion assay suggested that amongst the samples studied, purified compounds (compound 1 and 2) and microencapsulated purified compounds (compound 1 and 2) exhibited more effective against all the bacteria compared to the crude extracts. Antibacterial activity of the rhizome of Z. cassumunar Roxb. was contributed mainly by the essential oils components as the active compounds. Gram-negative bacteria (X. oryzae, X. translucens, Pseudomonas spp, E. coli, and S. typhimurium) appeared to the most resistant to the crude extracts, purified compounds, and microencapsulated of Z. cassumunar Roxb. compared to the gram-positive bacteria (S. aureus, B. cereus, and L. monocytogenes). Microencapsulated of the tested samples (crude extract, purified compound 1, and purified compound 2) of the rhizome Z. cassumunar Roxb. exhibited high antibacterial activity with no significantly different with the tested samples without microencapsulation. These results suggest potential antibacterial properties of Z. cassumunar Roxb., which useful for agricultural plant health, food preservation, natural therapies, and pharmaceuticals.

Self-enhancement (SE) is often overlooked as a fundamental cognitive ability mediated via the Pre-Frontal Cortex (PFC). Here we present research that establishes the relationship between the PFC, SE, and the potential evolved beneficial mechanisms. Specifically, we believe there is now enough evidence to speculate that SE exists to provide significant benefits and should be considered a normal aspect of the self. Whatever the metabolic or social cost, the upside of SE is great enough that it is a core and fundamental psychological construct. Furthermore, though entirely theoretical, we suggest that a critical reason the PFC has evolved so significantly in Homo sapien is to, in part, sustain SE. We therefore elaborate as to its proximate and ultimate mechanisms.

The last few years have witnessed an explosion of research on Sustainable development. Most of this research is concentrated on the developed countries related to the issues not compatible with developing countries. This paper fills the gap and reviews the literature related to developing and emerging economies and their environmental and social constraints under Renewable energy and sustainable development (RESD). It also investigates how RESD can be implemented in the presence of serious issues pertaining to population increase, shortage of energy supply, lack of transportation, shortage of clean water, less food production and bad environmental systems and these are coupled with war, and hunger and political instability. The main contribution of this paper is to present extensive discussion in the context of hypotheses of economic growth and its association with energy consumption, and renewable energy options for sustainable development.

Skin image analysis using artificial intelligence (AI) has recently attracted significant research interest, particularly for analyzing skin images captured by mobile devices. Acne is one of the most common skin conditions with profound effects in severe cases. In this study, we developed an AI system called AcneDet for automatic acne object detection and acne severity grading using facial images captured by smartphones. AcneDet includes two models for conducting two tasks: (1) a Faster R-CNN-based deep learning model for the detection of acne lesion objects of four types including blackheads/whiteheads, papules/pustules, nodules/cysts, and acne scars; and (2) a LightGBM machine learning model for grading acne severity using the Investigator’s Global Assessment (IGA) scale. The output of the Faster R-CNN model, i.e., the counts of each acne type, were used as input for the LightGBM model for acne severity grading. A dataset consisting of 1,572 labeled facial images captured by both iOS and Android smartphones was used for training. The results show that the Faster R-CNN model achieves a mAP of 0.54 for acne object detection. The mean accuracy of acne severity grading by the LightGBM model is 0.85. With this study, we hope to contribute to the development of artificial intelligent systems that are able to help acne patients understand more about their conditions and support doctors in acne diagnosis.

Thunderstorms are among the most common and most dangerous meteorological hazards in the world. They cause lightning and can lead to strong wind gusts, squall lines, hail and heavy precipitation combined with flooding, and therefore pose a threat to health and life, can cause enormous property damage and also endanger flight savety. Monitoring and forecast of thunderstorms are therefore important topics. In this work a novel method for the detection and forecast of thunderstorms and strong convection is presented. The detection is based on the global GLD360 lightning data in combination with satellite information from the satellite series Meteosat, HIMAWAARI and GOES, covering the complete geostationary ring. Three severity levels are defined depending on the occurrence of lightning and the brightness temperature difference of the water vapour channels and the infrared window channel (∼ 10.8 μm). The detection of thunderstorms and strong convection is the basis for the nowcasting up to 2 hours, which is performed with the optical flow method TV-L1. This method provides the needed atmospheric motion vectors for the extrapolation of the thunderstorm movement. Both, the validation results as well as the feedback of the customers show the great value of the new NowCastSat-Aviation (NCS-A) method. For example, the Critical Success Index (CSI) is with 0.64 still quite high for the 60 minute forecast of severe thunderstorms. The method is operated 24/7 by the German Weather Service (DWD) and used to provide thunderstorm information to aviation customers and the central weather forecast unit of DWD.

The RHAPS project was launched in 2019 with the major objective to identify specific properties of the fine atmospheric aerosol from combustion sources that are responsible for toxicological effects and can be used as new metrics for health-related outdoor pollution studies. In this paper, we present the overall methodology of RHAPS, and introduce the phenomenology and the first data observed. A comprehensive physico-chemical aerosol characterization has been achieved by means of high-time resolution measurements (e.g. number size distributions, refractory chemical components, elemental composition,) and low-time resolution analyses (e.g. oxidative potential, toxicological assays, chemical composition,…). Preliminary results show a high complexity in the relations observed, the link between air quality and toxicological endpoints being not obvious. We explore data from different points of view: source apportionment of PM1 and the role of source emissions on aerosol toxicity, the oxidative potential as a predictive variable for PM1 toxicity with focus on the secondary organic aerosol possessing redox-active capacity, exposure-response relationships for PM1, and air quality models to forecast PM1 toxicity. We provide a synthesis of results with the outlook to companion papers where data are analyzed in more detail.

Globally mangrove forests are substantially declining and a globally synthesized database of the drivers of deforestation and drivers’ interaction is scarce. Here we synthesized the key social-ecological drivers of global mangrove deforestation by reviewing about two hundred published scientific studies over the last four decades (from 1980 to 2021). Our focus was on both natural and anthropogenic drivers with gradual and abrupt impacts and their geographic ranges of effects and how these drivers interact. We also summarized the patterns of global mangrove coverage decline between 1990 and 2020 and identified the threatened mangrove species and their geographic ranges. Our consolidated studies reported a 8,600 km2 decline in the global mangrove coverage between 1990 and 2020 with the highest decline occurring in South and Southeast Asia (3870 km2). We could identify 11 threatened mangrove species, two of which are critically endangered (Sonneratia griffithii and Bruguiera hainseii). Our reviewed studies pointed to aquaculture and agriculture as the predominant driver of global mangrove deforestation though the spatial distribution of their impacts varied. Gradual climate variations, i.e. seal-level rise, long-term precipitation and temperature changes and driven coastline erosion, constitute the second major group of drivers. Our findings underline a strong interaction across natural and anthropogenic drivers with the strongest interaction between the driver groups aquaculture and agriculture and industrialization and pollution. Our results suggest prioritizing globally coordinated empirical studies linking drivers and mangrove changes and a global development of policies for mangrove conservation.

We suggest progress regarding the following six physics opportunities. List all elementary particles. Describe dark matter. Explain ratios of dark matter to ordinary matter. Explain eras in the history of the universe. Link properties of objects. Interrelate physics models. We use models based on Diophantine equations.

Artificial Intelligence (AI) is a leading technology of the current age of the Fourth Industrial Revolution (Industry 4.0 or 4IR), with the capability of incorporating human behavior and intelligence into machines or systems. Thus AI-based modeling is the key to building automated, intelligent, and smart systems according to today's needs. To solve real-world issues various types of AI such as analytical, functional, interactive, textual, and visual AI can be applied to enhance the intelligence and capabilities of an application. However, developing an effective AI model is a challenging task due to the dynamic nature and variation in real-world problems and data. In this paper, we present a comprehensive view on "AI-based Modeling" with the principles and capabilities of potential AI techniques that can play an important role in developing intelligent and smart systems in various real-world application areas including business, finance, healthcare, agriculture, smart cities, cybersecurity and many more. We also emphasize and highlight the research issues within the scope of our study. Overall, the goal of this paper is to provide a broad overview of AI-based modeling that can be used as a reference guide by academics and industry people as well as decision-makers in various real-world scenarios and application domains.

The number of artificially ripened pineapples is outnumbered than the naturally ripened pineapples. However, there is a lack of understanding between artificially ripened and naturally ripened pineapples. Thus the inquiry was anticipated to explore the physicochemical changes and organoleptic acceptability of the naturally ripened and artificially ripened pineapples. Farmers used different chemicals such as calcium carbide, ethylene, besides growth hormones to reduce production loss. Here we evaluated the content of moisture, ash, protein, fat, crude fiber, reducing sugar, total sugar, titratable acidity, sucrose, and vitamin C in both naturally ripened and artificially ripened pineapples. Artificially ripened pineapples showed a significantly lower vitamin C than naturally ripened ones, but arsenic content was nil in both samples. In the case of color and appearance, there was no significant difference between the two samples, but in case of the other organoleptic properties, such as flavor, sweetness, sourness, the natural one was more acceptable. Thus naturally ripened pineapples are more beneficial to consumers than artificially ripened ones.

Through a modern derivation of Planck's formula for the entropy of an arbitrary beam of photons we derive a general expression for the entropy production due to the irreversible process of the absorption of an arbitrary incident photon spectrum in material and its dissipation into an infrared-shifted grey-body emitted spectrum, the rest being reflected or transmitted. Employing the framework of Classical Irreversible Thermodynamic theory, we define the generalized thermodynamic flow as the flow of photons from the incident beam into the material and the generalized thermodynamic force is then just the entropy production divided by the photon flow which is the entropy production per unit photon at a given wavelength. We compare the entropy production under sunlight of different inorganic and organic materials (water, desert, leaves and forests) and show that organic materials are the greater entropy producing materials. Intriguingly, plant and phytoplankton pigments (including chlorophyll) have peak absorption exactly where entropy production through photon dissipation is maximal for our solar spectrum $430<\lambda<550$ nm, while photosynthetic efficiency is maximal between 600 and 700 nm. These results suggest that the evolution of pigments, plants and ecosystems has been towards optimizing entropy production rather than photosynthesis. We propose using the wavelength dependence of global entropy production as a biosignature for discovering life on planets of other stars.

Biodiversity conservation questions human practices towards biodiversity and, therefore, largely conflicts with ordinary societal aspirations. Decisions on the location of protected areas, one of the most convincing conservation tools, reflect such a competitive endeavor. Operations Research (OR) brings a set of analytical models and tools capable of resolving the conflicting interests between ecology and economy. Recent technological advances have boosted the size and variety of data available to planners, thus challenging conventional approaches bounded on optimized solutions. New models and methods are requested to use such a massive amount of data in integrative schemes addressing a large variety of concerns. Here, we provide an overview on the past, present and future challenges that characterize spatial conservation models supported by OR. By enlarging the spatial, temporal, taxonomic and societal horizons of biodiversity conservation planners navigate around multiple bio-socioeconomic equilibria and are able to decide on cost-effective strategies to improve biodiversity persistence.

3D Zernike moments based on 3D Zernike polynomials have been successfully applied to the field of voxelized 3D shape retrieval and have attracted more attention in biomedical image processing. As the order of 3D Zernike moments increases, both computational efficiency and numerical accuracy decrease. Due to this phenomenon, a more efficient and stable method for computing high-order 3D Zernike moments was proposed in this study. The proposed recursive formula for computing 3D Zernike radial polynomials combines the recursive calculation of spherical harmonics to develop a voxel-based algorithm for the calculation of 3D Zernike moments. The algorithm was applied to the 3D shape Michelangelo's David with a size of 150×150×150 voxels. As compared to the method without additional acceleration, the proposed method uses a group action of order sixteen orthogonal group and saving unnecessary iterations, the factor of speed-up is 56.783±3.999 when the order of Zernike moments is between 10 and 450. The proposed method also obtained an accurate reconstructed shape with the error rate (normalized mean square error) of 0.00 (4.17×10^-3) when the reconstruction was computed for all moments up to order 450.

(1)Background: Early-age concrete shrinkage induces stress that impact the cost and service life of concrete pavements. (2)Methods: In this study, strain measurements of field slabs were conducted and a methodology was presented that independently derived autogenous, drying, and thermal shrinkages in the initial stages of concrete placement. Total strain was measured according to five different environmental conditions and shrinkage strain was calculated for each condition. (3)Results: By measuring the strain of the slab and the specimen, the drying shrinkage strain was measured to be approximately 54% better than that by the conventional non-stressed cylinder method because it was possible to measure the drying shrinkage strain at the surface rather than in the middle part of the slab along its depth direction. When the water-to-cement ratio increased (35→40%), there was a considerable reduction (317με→82με) of autogenous shrinkage strain for the concrete at 28 days of age. Furthermore, calculation of stress-dependent strain allowed the presentation of more intuitive and accurate results. (4)Conclusion: As the measurement of independent shrinkage occurrence is possible, the consequent calculated result of the stress-dependent strain acting on real slabs will facilitate improvement in the construction quality, reduction in the development of defects in the concrete structure, and increase in the service life.

Fungal infections are more predominant in agricultural and clinical fields. Aspergillosis caused by Aspergillus fumigatus leads to respiratory failure in patients along with various illnesses. Due to the limitation of antifungal therapy and antifungal drugs, there is an emergence to develop efficient antifungal compounds from natural sources to cure and prevent fungal infections. The present study deals with the investigation of the mechanism of active compounds from our candidate agonist Aspergillus giganteus for aspergillosis. The integrity of treated Aspergillus fumigatus cell membrane and nuclear membrane was analyzed by determining the release of cellular materials. The antagonistic potential of antifungal compounds on the pathogen was confirmed by SEM analysis. The effective concentration of antifungal compounds (AFCs) was found to be 250µg/ml. The GC-MS profiling has revealed the bioactive metabolites responsible for the antagonistic nature of Aspergillus giganteus. The bioavailability and toxicological properties of pathogenesis related proteins have proved the efficiency of pharmacokinetic properties of selected compounds. Interaction of sarcin, thionin, chitinase and its derivatives from Aspergillus giganteus with the virulence proteins of UDP-N-acetylglucosamine pyrophosphorylase, N-myristoyl transferase and Chitinase have proved the druggable nature of the antifungal compounds.

Salmonella can cause acute and chronic infections in humans. Salmonella species are known to cause food poisoning and other diseases in developing countries. Their role in the pathogenesis of these diseases has received increased international attention. Despite numerous advances in sanitation, they still can infect humans and cause outbreaks in developed countries. For example, Salmonella causes about 1.2 million illnesses in the US each year with over 450 deaths. Additionally, Salmonella outbreaks cause significant losses to chicken producers globally. The Salmonella species is also prone to acquiring resistance to various classes of antibiotics. Hence, the need for a paradigm shift from antibiotics to bacteriophages to manage, control and treat bacterial infections. The ɛ34 phage belongs to Podoviruses and categorized into the P22-like phages. The P22-like phages include ɛ34, ES18, P22, ST104, and ST64T. In this work, we investigated the antibacterial property of ɛ34 phage tailspike protein against Salmonella newington (S. newington). We demonstrate here that, the phage’s tailspike protein enzymatic property as a LPS hydrolase synergizes with Vero Cell culture supernatant in killing S. newington. Using decellularized cartilage scaffold as an ex vivo tissue model, the ɛ34 TSP protected the scaffold from S. newington biofilm formation. Computational analysis of the ɛ34 TSP interaction with membrane proteins of S. newington demonstrated a higher probability (0.7318) of binding to ompA of S. newington, and when docked to ompA extracellular component, it produced a high free energy of -11.3kcal/mol. We also demonstrate the resistance/sensitivity of the tailspike to the digestive enzyme trypsin. The data obtained in this work indicates that the trypsin resistant tailspike protein of Ɛ34 phage can be formulated as a novel antibacterial agent against S. newington.

Background This paper draws learnings and successes based on field implementation experience spanning four years (2016–2019) of implementing CLTS by Prince of Peace Orphans and Widows Vision, a community-based organization located in Kaberamaido district in eastern Uganda. Methods The study aimed to document, disseminate and inform from an evidence-based point of view how adaptation and collaborative engagements triggers learning from mistakes to inform iterative changes from improvements and success.This is a descriptive paper that used project documents review based on field implementation experience. Existing project reports were synthesised, collated and curated for evidence. Data were drawn from project reports and records to inform narratives in writing. Implementation of the project was executed in homogenous rural communities occupied by people of the same dialect, cultural and social settings. Results We note that success in CLTS implementation can hardly be achieved by merely following prescriptions in handbooks and guidelines but rather by devising innovative community engagement and other participatory and community-driven techniques that foster adaptive management, promote ownership, and buy-in.Having learned from our failures, we used data to inform decisions and transformatively deviated from traditional CLTS implementation and introduced high impact and innovative approaches such as the use of CLTS helpdesks and Situation room, the Pamoja approach, learning labs and iterative feedback loops, innovatively tackling slippage and carefully introducing the follow-up mandona approach. These enhanced experiential learning and ultimately resulted in sustained sanitation behaviour. Conclusions The CLTS approach as outlined in the handbook needs to be flexibly adapted to address contextual needs. Reflective and learning sessions reinforced with routine feedback loops from implementers and beneficiaries yields tremendous results, propagates experiential learning, and ultimately results in a transformative deviation from undesirable to desired sanitation behaviours. These innovative approaches once carefully blended have proved to be sustainable, are adaptable and can work in an even larger scale and in a variety of contexts.

An analysis of the consistency of the Abraham and Minkowski momenta in the determination of the photon trajectory was carried out considering a new principle of conservation of the photon's mechanical energy, in which the photon conserves translational energy in orbital angular momentum when transiting between two media, introducing the relativistic energy wave (REW). The confrontation between REW and the recent theory of space-time waves (ST) was considered, pondering your differences. Throughout this study it was possible to verify that the Abraham momentum appears a relativistic photon ignition device in the transition between two media, acting as the hidden momentum of the Minkowski’s relativistic momentum. The wavy behavior in the matter is relativistic, and the relativistic trajectory appears with delays and advances, with points of synchronization between source-observer. The classical or relativistic trajectories are determined as a function of the angle of incidence and the relative refractive index, by one of two distinct non-additive torques, the classic by Abraham or the relativistic by Minkowski. It was found that the same analysis conducted under the principle of conservation of the mechanical energy of the photon can be treated by an new Doppler, Relativistic Apparent, that can be confused with other Dopplers in the treatment of redshift from distant sources. It was found that the conservation of energy in Orbital Angular Momentum (OAM), in the interaction with matter, explains that the synchronization instants are found in the inversion of the OAM, where the advances and delays of REW occur under negligible variations of the OAM, however, opposites.

This research work describes an architecture for building a system that guide a user from a forecast generated by a machine learning model through a sequence of decision-making steps. The system is demonstrated in manufacturing demand forecasting use case and can be extended to other domains. In addition, the system provides means for knowledge acquisition by gathering data from users. Finally, it implements an active learning component and compares multiple strategies to recommend media news to the user. Such media news aims to provide additional context to demand forecasts and enhance judgment on decision-making.

With the increased use of laterite nickel ore, the impact of high Al2O3 slag on blast furnace smelting has gradually increased. In this paper, the effects of slag basicity and Al2O3 content on slag viscosity and enthalpy change under constant temperature conditions was investigated. The changes in slag structure were analyzed by activation energy and Fourier Transform Infrared (FT-IR) spectroscopy. The relationship between slag components and slag temperature and viscosity when slag heat is reduced was investigated. The results showed that the viscosity first slightly decreased and then significantly increased with increasing basicity at constant temperature. With the addition of Al2O3 content, the viscosity of the slag increases. The activation energy increases with increasing slag basicity and Al2O3. With increasing basicity, the [SiO4]4- tetrahedral unit trough depth becomes shallow, the [AlO4]5- asymmetric stretching band migrates to lower wave numbers, and the slag structure depolymerizes. With the increase of Al2O3 content, the trough of [SiO4]4- tetrahedra deepens and the center of the symmetric stretching band moves to a higher wave number. The [AlO4]5- asymmetric stretching band becomes obvious, indicating the complexity of the slag structure. When the heat decreases, the slag temperature increases as the basicity increases, and the slag thermal stability is better at the basicity of 0.95-1.05. As the Al2O3 content increases, the thermal stability of the slag becomes worse.

The Industrial Internet of things (IIoT) enabled smart system has entered into a golden era of rapid technology growth. IIoT is a concept to make every system interrelated such that they are able to collect and transfer data over a wireless network without human intervention. In this paper, we discuss the development of an IoT enabled system to monitor the vibration signature of equipment as part of prognosis and availability management system (P&AM) that serves to prevent unplanned operation downtime and catastrophic failure of a whole system. In order to simply the complexity of processing video content and performing inference, the Intel OpenVINO platform was selected because of it’s simplicity, portability across Intel AI processors, performance and comprehensiveness of it’s analytical and diagnostics capabilities that can be tested in Intel’s DevCloud. The IIoT system consists of a High Performance Computing (HPC) platform based on Intel’s Xeon processors and Movidius AI accelerator, Intel’s OpenVINO toolkit for AI, a Regul high performance programmable controller capturing vibration data through sensors and a low-latency network connection. Notifications of anomalies are sent to a smartphone. This paper reveals an approach for the features extraction and selection, known as feature engineering, of the equipment component we want to protect. Feature engineering is the first step for the P&AM of these components and extends to the whole system. The broader aim of this paper is to help technical leaders at the exploring or experimenting stages of their AI framework to learn the concepts of implementing algorithms using datasets that have real value to their companies. Datasets generated and referred to in this paper were generated by simulation under various material failure scenarios.

Background: Chronic Obstructive Pulmonary Disease (COPD) and Idiopathic Pulmonary Fibrosis (IPF) are chronic, progressive lung ailments which are characterized by distinct pathologies. Early detection biomarkers and disease mechanisms for these debilitating diseases are lacking. Exosomes are small extracellular vesicles attributed to carry proteins, mRNA, miRNA and sncRNA to facilitate cell-to-cell communication under normal and diseased conditions. Exosomal miRNAs have been studied in relation to many diseases. However, there is little to no knowledge regarding the miRNA population of BALF or the lung tissue derived exosomes in COPD and IPF. Here, we determined and compared the miRNA profiles of BALF and lung tissue-derived exosomes from healthy non-smokers, healthy smokers, and patients with COPD and IPF in independent cohorts. Results: Exosome characterization using NanoSight particle tracking and TEM demonstrated that the BALF-derived exosomes were approximately 89.85 nm in size and ~2.95 X 1010 particles/mL. Lung-derived exosomes were ~146.04 nm in size and ~2.38 X 1011 particles/mL. NGS results identified three differentially expressed miRNAs in the BALF, while one in the lung-derived exosomes from COPD patients as compared to healthy non-smokers. Of these, three- and five-fold downregulation of miR-122-5p amongst the lung tissue-derived exosomes from COPD patients as compared to healthy non-smokers and smokers, respectively. Interestingly, there were key 55 differentially expressed miRNAs in the lung tissue-derived exosomes of IPF patients compared to non-smoking controls. Conclusions: Overall, we identified specific miRNAs to develop as biomarkers or targets for pathogenesis of these chronic lung diseases.

Membrane transporters (MTs) are mainly localized at the plasma membrane (PM), tonoplast and vacuolar membrane (VM) of cells in all plant organs. Their work is to maintain the cellular homeostasis by controlling ionic movements across PM channels from roots to upper plant parts, xylem loading and remobilization of sugar molecules from photosynthesis tissues in the leaf (source) to roots, stem and seeds (sink) via phloem loading. The plant’s whole source-to-sink relationship is regulated by multiple transporting proteins in a highly sophisticated manner and driven based on different stages of plant growth and development (PG&D), and environmental changes. The MTs play a pivotal role in PG&D in terms of increased plant height, branches/tiller numbers, enhanced numbers, length and filled panicles per plant, seed yield and grain quality. Dynamic climatic changes disturbed the ionic balance (salt, drought and heavy metals) and sugar supply (cold and heat stress). Due to poor selectivity, some of the MTs also uptake toxic elements in the roots that negatively impact on PG&D, later on also exported to upper parts and then deteriorate the grain quality. As an adaptive strategy, in response to salt and HMs plants activated PM and VM localized MTs that export toxic elements into vacuole, and also translocate in the root’s tips and shoot. However, in case of drought, cold and heat stresses, MTs increased the water and sugar supply to all organs. In this review, we mainly reviewed recent literature from Arabidopsis, halophytes, and major field crops such as rice, wheat, maize and oilseed rape to argue on the global role of MTs in PG&D and abiotic stress tolerance. We also discussed the gene expression level changes and genomic variations within a species as well as within a family in response to developmental and environmental cues.

Organizing pneumonia (OP) can be diagnosed pathologically, and cryptogenic OP (COP) and secondary OP (SOP) have been classified by cause and underlying context. Because it is clinically difficult to differentiate between COP and SOP, this study investigated characteristics that could distinguish between COP and SOP. The medical records of patients who underwent lung biopsy from 2016 to 2018 were retrospectively reviewed. Eighty-five patients had pathologically proven OP, including 16 diagnosed with COP and 69 diagnosed with SOP. The most common cause of SOP was infectious pneumonia, observed in 57 (82.6%) of the 69 patients. Median time from symptom onset to hospital admission is shorter (P=0.006) and fever was more common (P=0.021) in the SOP. Some laboratory results differed significantly between the two groups. Lymphocyte in bronchoalveolar lavage fluid were higher in the COP (P=0.012). Radiologic findings showed that effusion was more common in the SOP (P=0.043). There were no between-group differences in steroid use, 30 day and in-hospital mortality rates, and rates of OP outcomes and recurrences. Infection is the main cause of SOP. Symptom onset is more rapid in patients with SOP. Pleural effusion was more common in the SOP but there were no differences in clinical course.

Background: Babesiosis and its tick carriers cause serious problems for cattle and are among the common protozoan blood parasites in Ethiopia. Methods: A cross-sectional survey was conducted from September 2019 to August 2020 to identify babesiosis in cattle and its tick vectors in extensively managed livestock in Dasenech and Salamago District South Omo Ethiopia. A total of 470 blood samples were collected for identification of hemoparasite using a thin blood smear followed by the Giemsa staining method and Packed Cell Volume (PCV) determination for detection of anemia. Results: Accordingly, the overall prevalence of bovine babesiosis in the study districts were 21.7% and Babesia bigemina (15.53%) and B. bovis (6.17%) were identified during this study. Factors such as age, sex, body condition score, season, tick burden, and level of tick Infection were considered as risk factors; yet, the season and level of tick Infection were found significantly associated (p< 0.05) with the occurrence of babesiosis. Besides, the mean PCV value of infected cattle (21.49%) was lower than non-infected animals (28.29%) which shows there was a strong correlation (p=0.0001) between anemia and Babesiosis. The prevalence of tick Infection was 86.17% (405/470) and a total of 8040 ticks adult ticks belonging to four tick genera namely Amblyomma (32.34%), Boophilus (18.51%), Hyalomma (18.94%), and Rhipicephalus (16.38%) were identified and all have a significant role (p< 0.05) on the occurrence of babesiosis in cattle. Conclusion: Bovine babesiosis is an important hemoparasitic protozoan disease of cattle in the study areas. To address and manage the problem, nearby veterinary service systems need to diagnose blood parasites and provide alternatives, especially for tick-borne diseases. Also, it is essential to customize appropriate and integrated tick control measures and tactical treatment of overt bovine babesiosis clinical cases.

Little is known about fertility preservation within the TGD community. Few receive adequate counseling placing them at risk for decision regret. The goal of this project was to develop, and pilot test the Transgender Fertility Preservation Knowledge Scale (TFPKS) to support the development and evaluation of health education resources. A community engaged; cross sectional retrospective design was used. Participants (n=189) provided information describing demographics, healthcare decision-making preferences, experiences/knowledge of fertility preservation, and treatment decision regret. The sample included 189 TGD adults. Most were white and aged 26-35 (33.3%) and not offered a consultation (73.0%). Many (41.2%) report they would have participated if offered. Knowledge regarding fertility preservation to support this desire was low. Most participants identified a patient-centered (69.4%) decision making preference. Much remains to address the healthcare inequities within the TGD population regarding fertility preservation. Overall participants had low levels of knowledge to support decision making. Further, healthcare system and individual barriers to fertility preservation remain prevalent. A foundational step towards addressing these disparities, is the identification of a valid and reliable instrument to measure TGD knowledge of fertility preservation.

Our investigations show that electrochemical corrosion of copper is faster than electrochemical corrosion of aluminium at temperatures below 100oC. Literature data analysis shows that the Al atoms diffuse faster than the Cu atoms at temperatures higher than 475oC, Al rich intermetallic compounds (IMCs) are formed faster in the Cu-Al system, and the Kirkendall plane shifts toward Al side. Electrochemical corrosion occurs due to electric current and due to diffusion. An electronic devise working time, for example, depends on initial copper cover thickness on aluminium wire, connected to the electronic devise, temperature, and volume and dislocation pipe diffusion coefficients, so copper, iron, and aluminium electrochemical corrosion rates are investigated experimentally at room temperature and at temperature 100oC. Intrinsic diffusivities ratios of copper and aluminium at different temperatures and diffusion activation energies in the Cu-Al system are calculated by proposed here methods using literature experimental data. Dislocation pipe and volume diffusion activation energies of pure iron are calculated separately by earlier proposed method using literature experimental data. Aluminium dissolved into NaCl solution as the Al3+ ions at room temperature and at temperature 100oC, iron dissolved into NaCl solution as the Fe2+ (not Fe3+) ions at room temperature and at temperature 100oC, copper dissolved into NaCl solution as the Cu+ ions at room temperature and as the Cu+ and the Cu2+ ions at temperature 100oC. It is founded experimentally that copper corrosion is higher than aluminium corrosion, and ratio of electrochemical corrosion rates, kCu/kAl>1, decreases with temperature increasing, although iron electrochemical corrosion rate doesn’t depend on temperature below 100oC. It is obvious, because melting point of iron is more higher then melting point of copper or aluminium. It is calculated that copper electrochemical corrosion rate is approximately equal to aluminium electrochemical corrosion at temperature about 300oC, so copper can dissolve into NaCl solution mostly as the Cu2+ ions at temperature about 300oC. Ratio of intrinsic diffusivities, DCu/DAl <1, increases with temperature increasing, and intrinsic diffusivity of aluminium could be approximately equal to intrinsic diffusivity of copper at temperature about 460oC.

The use of Information Communication Technologies (ICT) in education brings up new possibilities of promoting the learning and health experiences. In this sense, education contexts of 21st century must consider these two areas of knowledge, especially their integration. This article presents learning practices developed with mobile devices and games, in order to improve learning and well-being in children and adolescents undergoing cancer treatment in non-formal educational setting. The methodology is based on qualitative case studies with content-based data analysis, involving informal interviews and observation methods. The study considers data from 5 patients who participated in the research between 2015 and 2019. The results demonstrate a positive influence of the practices with mobile technologies and games in terms of learning and in the well-being feeling of patients during the treatment.

The Covid-19 pandemic has resulted in the closure of schools at every level, globally, forcing education to move online. Meeting the needs of students online for Science Lab classes, in particular, is a challenge since the physical labs are not available to the teachers or students. OLabs is a virtual Science Lab providing a complete learning environment of theory, experimental procedures, videos, animations, simulations, and assessments that capture real lab experiences with the relevant pedagogy. This study looks at the acquisition and behaviors of users, on the OLabs platform, during pre and Covid-19 times. Using Google Analytics, we observe that, during the pandemic time, users increasingly adopted OLabs as a new learning pedagogy for performing experiments as indicated by parameters like the number of users; the number of unique pages viewed per session; time spent on viewing content; bounce rate; and preference for content types such as theory, simulations, videos, and animations.

We addressed the frequent occurrence of mixed-chain lipids in biological membranes and their impact on membrane structure by studying several chain-asymmetric phosphatidylcholines and the highly asymmetric milk sphingomyelin. Specifically, we report trans-membrane structures of the corresponding fluid lamellar phases using small-angle X-ray and neutron scattering, which were jointly analyzed in terms of a membrane composition-specific model, including a headgroup hydration shell. Focusing on terminal methyl groups at the bilayer center we found a linear relation between hydrocarbon chain length mismatch and the methyl-overlap for phosphatidylcholines, and a non-negligible impact of the glycerol backbone-tilting, letting the sn1-chain penetrate deeper into the opposing leaflet by half a CH2 group. That is, penetration-depth differences due to the ester-linked hydrocarbons at the glycerol backbone, reported previously for gel phase structures also extend to the physiological more relevant fluid phase, but are significantly reduced. Moreover, milk sphingomyelin was found to follow the same linear relationship suggesting a similar tilt of the sphingosine backbone. Complementary performed molecular dynamics simulations revealed that there is always a part of the lipid tails bending back, even if there is a high interdigitation with the opposing chains. This suggests that hydrocarbon chain interdigitation plays only a minor role in transbilayer coupling. For both cases of adaption to chain length mismatch, chain-asymmetry has a large impact on hydrocarbon chain ordering, inducing disorder in the longer of the two hydrocarbons.