The stress imposed by ethanol to Saccharomyces cerevisiae cells are one of the most challenging limiting factors in industrial fuel-ethanol production. Consequently, the toxicity and tolerance to high ethanol concentrations has been the subject of extensive research, allowing the identification of several genes important for increasing the tolerance to this stress factor. However, most studies were performed with well characterized laboratory strains, and how the results obtained with these strains work in industrial strains remains unknown. In the present work we have tested three different strategies known to increase ethanol tolerance by laboratory strains in an industrial fuel-ethanol producing strain: overexpression of the TRP1 or MSN2 genes, or overexpression of a truncated version of the MSN2 gene. Our results show that the industrial CAT-1 strain tolerates up to 14% ethanol, and indeed the three strategies increased its tolerance to ethanol. When these strains were subjected to fermentations with high sugar content and cell-recycle, simulating the industrial conditions used in Brazilian distilleries, only the strain with overexpression of the truncated MSN2 gene showed improved fermentation performance, allowing the production of 16% ethanol from 33% of total reducing sugars present in sugarcane molasses. Our results highlight the importance of testing genetic modifications in industrial yeast strains under industrial conditions in order to improve the production of industrial fuel ethanol by S. cerevisiae.

Shot peening has become a well-established technique for the introduction of beneficial compressive Residual Stresses (RS) into the near-surface layers of metallic materials for the purpose of preventing or suppressing fatigue crack nucleation and growth. Ti-alloys are widely used to fabricate compressor blades of aeroengines. Titanium blades that may be susceptible to different modes of damage under cyclic loading (high cycle fatigue, fretting fatigue) are often subjected to shot peening to extend their safe operating time. The control and monitoring of residual stresses in titanium blades is of great importance to assure the safety of aeroengines. The techniques for residual stress evaluation include mechanical methods (material removal) as well as physical methods such as X-ray diffraction. Perhaps the most common and practically accessible form of the latter is the method. Conventional laboratory X-ray diffractometers typically probe samples to the depths up to ~20 µm that correspond to 1x...5x the average grain size for typical metals and alloys. The limitations of the method have been identified and reviewed in the literature, motivating the use of other semi-destructive approaches to evaluate the residual stresses in deeper layers and at more sharply defined locations. In the present report we present a case study of the comparison between non-destructive and semi-destructive evaluation techniques, namely the X-ray diffraction method against the mechanical and FIB-DIC ring-core drilling applied to the samples of VT6 (Russian designation of Ti-6Al-4V) titanium alloy after shot peening with 1 mm steel balls. Mechanical drilling of circular holes of ~2 mm diameter with laser speckle interferometry monitoring of strains gives a rough spatial resolution of a few millimeters, while the Korsunsky FIB-DIC method of Ga-ion beam micro-ring core milling within FIB-SEM with Digital Image Correlation (DIC) deformation analysis delivers spatial resolution down to a few micrometers. Good agreement has been found between the X-ray and FIB-DIC estimates of RS variation profiles as a function of depth in shot peened titanium alloy samples. Some advances in the FIB-DIC method are presented and discussed in terms of the acceleration of data acquisition and interpretation.

Human gut microbiome is associated with various diseases, including autism spectrum disorders (ASD). Variations of the taxonomical composition in the gut microbiome of children with ASD have been observed repeatedly. However, features and parameters of the CRISPR-Cas systems in the gut microbiome of children with ASD have not been investigated yet. Here we demonstrate such an analysis in comparison with the healthy microbiome. For the identification of CRISPR-Cas systems, we used a combination of the publicly available tools suited for completed genomes with subsequent filtrations. In all considered datasets, the microbiomes of children with ASD contained fewer arrays per Gb of assembly, than the control group, but the arrays included more spacers on average. These patterns were observed systematically in our datasets, although their statistical significance hardly matched the thresholds. CRISPR arrays from the microbiomes of children with ASD differed from the control group neither in the fractions of spacers with protospacers from known genomes, nor in the sets of known bacteriophages providing protospacers. The majority of bacterial protospacers of the gut microbiome systems for both children with ASD and the healthy ones was located in the prophage islands.

This study introduces and demonstrates a comprehensive, accurate, unbiased approach to robust quantitative comparison of Electronic Nicotine Delivery Systems (ENDS) appropriate for establishing substantial equivalence (or lack thereof) between tobacco products. The approach is demonstrated across a family of thirteen pen- and pod-style ENDS products. Methods employed consist of formulating a robust emissions surface regression model, quantifying the empirical accuracy of the model as applied to each product, evaluating relationships between product design characteristics and maximum emissions characteristics, and presenting results in formats useful to researchers, regulators, and consumers. Results provide a response surface to characterize emissions (total particulate matter and constituents thereof) from each ENDS appropriate for use in a computer model and for conducting quantitative exposure comparisons between products. Results demonstrate that emissions vary as a function of puff duration, flow rate, E-Liquid composition, and device operating power. Further, results indicate that regulating design characteristics of ENDS devices and consumables may not achieve desired public health outcomes; it is more effective to regulate maximum permissible emissions directly. Three emissions outcome measures (yield per puff, mass concentration and constituent mass ratio) are recommended for adoption as standard quantities for reporting by manufacturers and research laboratories. The approach provides a means of (a) quantifying and comparing maximal emissions from ENDS products spanning their entire operating envelope, (b) comparative evaluation of ENDS devices and consumable design characteristics, and (c) establishing comparative equivalence of maximal emissions from ENDS. A consumer-oriented product emissions dashboard is proposed for comparative evaluation of ENDS exposure potential. Maximum achievable power dissipated in the coil of ENDS is identified as a potentially effective regulatory parameter.

Omics technologies, viz., genomics, transcriptomics, proteomics, metabolomics, and phenomics, are becoming an integral part of virtually every commercial cereal breeding program because they provide substantial dividends per unit time in both pre-breeding and breeding phases. Continuous advances in cereal-omics promise—in combination with time efficiency—the cost benefits. In this review, we provide a comprehensive overview of the established cereal-omics methods in five major cereals, viz., rice, sorghum, maize, barley, and bread wheat. We cover the evolution of technologies in each omics section independently and concentrate on their use to improve economically important agronomic as well as biotic and abiotic stress-related traits. Advancements in the (1) identification, mapping, and sequencing of molecular/structural variants, (2) high-density transcriptomics data to study gene expression patterns, (3) global and targeted proteome profiling to study protein structure and interaction, (4) metabolomic profiling to quantify organ level small-density metabolites and their composition, and (5) high-resolution high-throughput image-based phenomics approaches are surveyed in this review.

Finding new ways for the preparation of cross-linked structures is a significant problem in terms of materials for biomedical application, lithium batteries electrolytes, and etc. Within this work we have studied the possibility to utilize hydrosilylation and Piers-Rubinsztajn reactions to obtain cross-linked model phosphazene compounds, containing eugenoxy and guaiacoxy groups. It was shown that Piers-Rubinsztajn reaction cannot be efficiently used to prepare tailored polymer-matrix, due to the catalyst deactivation by nitrogen atoms of phosphazene units. A number of cross-linked phosphazene-based materials was obtained with the use of hydrosilylation reaction and their properties were studied by NMR spectroscopy, FTIR, DSC, and TGA. This work showed a perspective for the use of eugenoxy functional groups for the preparation of three-dimensional hybrid phosphazene/siloxane-based materials for various applications.

Globally, an approximate of 380,000 patients succumbed to death due to the pandemic COVID-19 which also infected more than six million people since December 2019. Not sparing anyone, COVID-19 infections are widely reported among healthcare professionals, sanitation workers and researchers too while global leaders and various governments are providing their best in defending their citizens against this airborne and contact spread virus. In order to contain the virus and protect millions of lives from this deadly coronavirus, there is a need to have a combination of advanced engineering technology and medical facilities. Application of applied science, engineering and technology diffuse almost every aspect of contemporary living. Grasping the fundamentals to determine humanity's most imperative and forthcoming challenges is essential. Artificial Intelligence, the technology that learns, adapts and reciprocates the actions according to the situations, finds optimum position in the fight against corona virus and acts as a powerful tool against this pandemic. In this research article, the authors discusses how Artificial Intelligence (AI) can be leveraged to fight the deadly virus. The research paper further discusses the efficient utilization of AI across the globe to help in testing, treating and serving the population in these hard times. This manuscript focuses on the potential impact of the process in which AI can be implemented to prevent, test and treat.

The electronic transport stability in nanodevices composed by metal/trans-polyacetylene /metal with different long length has contributed greatly for performance, homogeneity, stability, organization of the chains, reproducibility and higher conductivity. In this paper, we present an analytical study of the electronic transport characteristics from dimerized trans-polyacetylene (trans-PA) molecules containing an odd-even number of sites coupled to metal leads (left and right) in T-shaped geometry using the extended Su-Schrieffer-Heeger (SSH) model based on tight-binding Hamiltonian with the Non-Equilibrium Green´s Function (NEGF) via Heisenberg´s equation of motion and the Keldysh´s formalism. Due to the complexity of the T-shaped odd-even chain, our proposal was to test the effects on the finite-length network for three, four, five sites and furthermore foresee for 17-sites. We show how to tune dimerization strength () coupling to the parameters and T-shaped geometry of the device to which it affects the overlap integral localized at the three endpoints of the T-shaped system, making both the odd and even chains to undergo a metal-insulator transition in their electronic behavior. The results reached through control parity of the chain plane of the parameters governing () the electronic and experimental tunneling allow a better understanding of the subject.

In the last decades, numerous studies indicated the substantial role semiconductors could play in photocatalytic processes for environmental applications. Materials that contain a semi-conductor as a photo-catalyst have a semi-permanent capacity for removing harmful gases from the ambient air. In the present work, the focus is on TiO2. Heterogeneous photo-catalysis using TiO2 leads to the degradation of NO/NO2, benzene, toluene, and other priority air pollutants once in contact with the semiconductor surface. Preliminary evidence indicates that TiO2 containing construction materials and paints efficiently destroy the ozone precursors NO and NO2 up to 80% and 30%, respectively. Therefore, the development of innovative coatings containing TiO2 as a photo-catalyst was in the foreground of research activities with the aim to be used as building and construction materials mainly outdoors, e.g. on building facades in high traffic roads for the degradation of priority air pollutants (NOx and volatile organic compounds) in the polluted urban atmosphere. Though the advantages connected with the application of TiO2 due to its band gap of 3.2 eV are limited. TiO2 is effective only in the UV-region (ca. 5%) of the solar spectrum with wavelengths λ

Braskem is the only company in the world that produces green polyethylenes (HDPE – high density polyethylene and LLDPE – linear low density polyethylene) derived from the dehydration of sugarcane ethanol. Although the performance of green and fossil nominally same polyethylenes are equivalent, commercial clients may use blends of up to 51% of green polyethylenes and 49% of fossil polyethylenes and still have the right to use the I’m greenTM label which appeals to environmental conscious consumers and places these companies in a noticeable position. The Annual Income Statement - AISs from 2010, when Braskem started production of green PE, until 2018, show there was growth of revenues. Despite of the production of polyethylenes have continued stable and the number of green polyethylenes patents have decreased since 2014, the profits with the BRKM5 stocks increased. There is no transparency of how carbon credits were gained and in the AIS. Investments in securities in the Brazilian financial market (BRKM5 and carbon credits) are much more attractive than the investment in new patents, because they generate greater gains (268% increase in the average share price of BRKM5 from 2012 to 2018) and do not require large investments in R&D.

Uncovering hidden mixture correlation among variables have been investigating in the literature using mixture R-vine copula models. These models are hierarchical in nature. They provides a huge flexibility for modelling multivariate data. As the dimensions increases, the number of the model parameters that need to be estimated is increased dramatically, which becomes along with huge computational times and efforts. This situation becomes even much more harder and complicated in the mixture Regular vine models. Incorporating truncation method with mixture Regular vine models will reduce the computation difficulty for the mixture based models. In this paper, tree-by-tree estimation mixture model is joined with the truncation method, in order to reduce the computational time and the number of the parameters that need to be estimated in the mixture vine copula models. A simulation study and a real data applications illustrated the performance of the method. In addition, the real data applications show the affect of the mixture components on the truncation level.

Interpore hydrates are the main occurrence forms of marine gas hydrates. Pore characteristics are a vital factor affecting the thermodynamic properties of hydrates and their distribution in sediments. Currently, the characterization of the pore system for hydrate-bearing reservoirs are little reported. Therefore this paper focus on the Krishna-Godavari Basin, via varies methods to characterize the hydrate-bearing sediments in the region. The results showed that X-ray Diffraction(XRD) combined with Scanning Electron Microscope (SEM)and Cast Thin Section (CTS) can better characterize the mineral composition in the reservoir, High Pressure Mercury Injection (HPMI) focused on the contribution of pore size to permeability, Constant Rate Mercury Injection(CRMI) had the advantage of distinguishing between pore space and pore throat, and Nuclear Magnetic Resonance Cryoporometry (NMRC) technique can not only obtain the pore size distribution of nanopores with a characterization range greater than Nitrogen Gas Adsorption (N2GA), but also quantitatively describe the trend of fluids in the pore system with temperature. As for pore system, Samples 58 and 68 all developed nanopores, the mineral distribution was relatively scattered, and they were rich in paleontological shells such as foraminifera, among which Sample 68 had more pyrite content, and abundant pyrite framboid was observed, which made the intergranular pore develop and provide more nanopores. Sample 58 has a high concentration of pore and throat, high pore connectivity, low pore curvature, and pores with a diameter of 10μm contributing to the main permeability, with an average pore radius of 2.495μm, whereas Sample 68 has poor pore connectivity, high curvature, and pores with a diameter of 1μm contributing to the main permeability, with an average pore diameter of 60 nm, which explains the obvious difference in permeability between the two samples.

Recent discoveries of potential ice particles and ice-cemented regolith on celestial bodies like the Moon and Mars have ushered in new opportunities for developing technologies to extract water, facilitating future space missions and activities on these celestial surfaces. This study delves into the potential for water extraction from regolith through an experiment designed to test water recuperation from regolith simulant under varying gravitational conditions. The resultant water vapor extracted from the regolith is re-condensed on a substrate surface and collected in liquid form. Three types of substrates, hydrophobic, hydrophilic, and grooved, are explored. The system’s functionality was assessed during a parabolic flight campaign simulating three distinct gravity levels: microgravity, lunar gravity, and Martian gravity. Our findings reveal that the hydrophobic surface demonstrates the highest efficiency due to drop-wise condensation, and lower gravity levels result in increased water condensation on the substrates. This experiment aims to provide insights into in-situ water recovery, which is pivotal for establishing economically-sustainable water supplies for future missions.

The present study was aimed at revealing the influence of the mechanical stress induced by water molecules adsorption on the composition of crystalline phases in the ZrO2–3mol%Y2O3-nanoparticles. Three basic methods have been used to determine the phase transition: neutron diffraction, Raman microspectroscopic scanning, and X-ray diffraction. The fact of phase-structural β → α transformation and the simultaneous presence of two polymorphic structural modifications (β is the phase of the tetragonal syngony and α of monoclinic syngony in nanosized particles (9nm)) under normal physical conditions was established by these methods. Satisfactory consistency was achieved between the results obtained using different techniques.

During the peak height velocity, it is crucial to adjust training intensity to optimize performance and minimize injury risk. This cross-sectional study compared external and internal intensities according to the type of training task (i.e., analytical tasks, small-sided games, and training matches). Similarly, the effect of these training tasks on the maturation age of young players was analyzed. Fifty-five U-15 and U-16 boys, representatives of two soccer clubs in southwestern Spain, were monitored using inertial measurement units and heart rate monitors. These devices reported data on training intensities. Their anthropometric data were also taken, along with the date of birth and measurement, to estimate the maturation age. To identify specific differences between groups, the nonparametric Friedman test and pairwise comparisons were performed using the Durbin-Conover post-hoc test. In addition, Spearman's rank correlation coefficients were calculated to better understand the impact of the variables. There were significant differences in favor of training matches in distance covered, maximum and average speed, and maximum and average heart rate compared to small-sided games and analytical tasks. In addition, high intensity actions and sprints were significantly higher during training matches compared to analytical tasks, and during small-sided games compared to analytical tasks. Player Load per minute was significantly higher during training matches compared to small-sided games, and during small-sided games compared to analytical tasks. Maximum speed, and maximum and average heart rate were also significantly higher during small-sided games compared to analytical tasks. Positive correlations between maturational age and high-intensity actions, accelerations, and decelerations were found, indicating higher intensity activities in more mature players. A negative correlation between Player Load per minute and maturational age suggests more efficient load management in mature players. No significant differences were found in distance per minute, sprints, speed, and heart rate, implying other factors influence these variables. These findings underscore the importance of considering biological maturation and the variability of training tasks in the planning and evaluation of the development and performance of youth athletes.

In this systematic review, the PRISMA method was applied to examine publications from the last two decades that have investigated the noxious gaseous emissions from dairy barns. The aim was to analyse the outcomes from literature studies estimating the quantities of polluting gases produced in dairy barns, with specific focus on ammonia (NH₃) emissions. The review also explores proposed methods to reduce the associated effects through mitigation strategies. Estimation of NH₃ emissions is significantly influenced by the complex interactions among several factors, including animal management practices, such as controlling animal behavioral activities; manure management, like utilising practices for floor manure removal; the type of structure housing the animals, whether it is naturally or mechanically ventilated; and environmental conditions, such as the effects of temperature, wind speed, relative humidity, and ventilation rate on NH₃ release in the barn. These influential components have been considered by researchers, identifying targeted mitigation strategies. Despite growing attention to the issue, gaps in the scientific literature were identified and discussed, particularly regarding the analysis of mitigation strategies and their long-term impacts (i.e., environmental, economic and productivity-wise).

The benthic matrix acts as a key natural archive where the memory of long-term timescale environmental changes is recorded. Some ecological and chemical features of fjord sediments were explored during the AREX cruise carried out in the Svalbard archipelago in summer 2021. The activity rates of the enzymes leucine aminopeptidase (LAP), beta-glucosidase (GLU) and alkaline phosphatase (AP) and community-level physiological profiles (CLPP) were studied with the aim of determining the functional diversity of the benthic microbial community, while bacterial isolates were screened for their susceptibility to antibiotic molecules in order to explore the role of these extreme environments as potential reservoirs of antibiotic resistance. Enzyme activity rates were obtained by fluorogenic substrates, CLPP by Biolog Ecoplates; antibiotic susceptibility assays were performed through the standard disk diffusion method. Spatial trends observed in the functional profiles of the microbial community suggested the variability in the microbial community composition, presumably related to the patchy distribution of organic substrates. Complex Carbon sources, carbohydrates and amino acids were the organic polymers preferentially metabolized by the microbial community. Multiple resistance to ampicillin, clindamycin and gentamycin was detected in all the sampled sediments, excepting in the southern Hornsund area, stressing the role of sediments as a potential reservoir of chemical wastes ascribable to antibiotic residuals. This study provides new insights on the health status of fjord sediments of West Spitsbergen applying a dual ecological and biochemical approach. Microbial communities in the fjord sediments showed globally a good functional diversity, suggesting their versatility to rapidly react to changing conditions.

Currently, the textile industry is a poorly automated sector, due in part to problems in the handling of deformable leather and textile parts during production operations. In this work, several problems in the handling process of leather and textile parts are addressed, introducing methods to increase the automation of the process. A pneumatic actuator designed to pick up textile or leather parts avoiding their deformation during transport has been developed. This actuator maximizes the number of gripping points to improve handling, making it more stable and efficient. Additionally, a vision system has been implemented in the part picking task which, in conjunction with the CAD information of the part, sends the modified gripping position of the part to the robot. This allows customized handling of each textile or leather part. Finally, validation tests have been carried out on this development, both in simulations and in laboratory conditions, demonstrating its viability and direct applicability in the production line.

Can the type of implant rehabilitation influence peri-implant bone loss in case of full-arch mandibular prosthesis? The purpose of the study was to assess, by orthopantomograms (OPG), bone loss around implants in different types of implant-supported prosthetic rehabilitations and evaluate potential risk factors associated with the number and location of implants that may have an association with bone defect. A radiographic study was conducted on 22317 OPGs in the time range from 2010 to 2024. All OPGs with implant-supported prosthetic mandibular rehabilitations were included in the study. A total of 155 OPGs were evaluated, with peri-implant bone loss identified in 64 (41.3%). Distal implants (furthest from the center) across various positioning patterns were most susceptible to bone loss, with positions 3.6 and 4.6 demonstrating the most frequent occurrences (25 and 26 cases, respectively). χ² test revealed significant associations between both implant positioning pattern (p < 0.001) and number of implants (p < 0.001) with peri-implant bone loss. Also by updating the sample of OPGs, increased susceptibility to bone resorption was found for implants placed distal to the mental foramen compared to mesial ones in full-arch implant-supported fixed prostheses. Prospective clinical studies will then be useful to investigate this finding further.

Background: Donor shortage limits the utilization of heart transplantation making it available for only a fraction of the patients on the transplant wait list. Continuous flow left ventricular assist devices have therefore risen in importance as a standard of care for end-stage heart failure. Short, mid and long-term survival rates as well as quality of life are now being studied with newer and more sophisticated machines. This study attempts to assess the impact of several commonly associated risk factors on long-term survival of LVAD recipients. Methods The TriNetX dataset comprises de-identified patient information across healthcare organizations. The study assesses the impact of demographics, infections, comorbidities, types of cardiomyopathies, arrhythmias, and end-organ dysfunction on long-term LVAD survival. The Log-rank test was used to assess post-implant survival effects, while Cox regression was used in univariate analysis to obtain Hazard Ratio (HR). Patients with unknown lab results were removed before the univariate analysis and K-M survival curves were generated. Samples with missing values or data errors (e.g., implantation is after recorded death) were excluded. All analyses were conducted using the Python programming language and the lifelines library. This study is IRB-exempt Results This study identified common risk factors that significantly impact survival such as CMV, hepatitis A exposure, atrial fibrillation, paroxysmal ventricular tachycardia, ischemic cardiomyopathy, renal dysfunction, diabetes, COPD, mitral valve disease, and hypertension. Conclusions This is the first report of a detailed long-term survival assessment of several risk factors that impact the LVAD population.

Mechanisms for somatic chromosomal mosaicism (SCM) and chromosomal instability (CIN) are incompletely understood. During SNP-array molecular karyotyping and bioinformatic analyses of children with neurodevelopmental disorders and congenital malformations (n=612), we observed colocalizaion of regular chromosomal imbalances or copy number variations (CNV) with mosaic ones (n=47 or 7.7%). Analyzing molecular karyotyping data and pathways affected by CNV burdens, we proposed a mechanism for SCM/CIN, which had been designated as “chromohelkosis” (from the Greek chromosome ulceration/open wound). Briefly, structural chromosomal imbalances are likely to cause local instability (“wreckage”) at the breakpoints, which results either to partial/whole chromosome loss (e.g. aneuploidy) or elongation of duplicated regions. Accordingly, a function for classical/alpha satellite DNA (protection from the wreckage towards the centromere) has been hypothesized. Since SCM and CIN are ubiquitously involved in development, homeostasis and disease (e.g. prenatal development, cancer, brain diseases, aging), we have metaphorically (ironically) designate the system explaining chromohelkosis contribution to SCM/CIN as the cytogenomic “theory of everything” like the homonymous theory in physics inasmuch as it might explain numerous phenomena in chromosome biology. Recognizing possible empirical and theoretical weaknesses of this “theory”, we nevertheless believe that studies of chromohelkosis-like processes are required to understand structural variability and flexibility of the genome.

The present study aims at deposition of zinc phosphate coatings with the incorporation of nano Titanium dioxide particles by chemical phosphating method. Zinc phosphate coatings were developed on low carbon steel by using nano TiO2 in the standard phosphating bath. The Coated low carbon steel samples were assessed for corrosion studies using electrochemical impedance spectroscopy and potentiodynamic polarisation techniques in 3.5% NaCl solution. Chemical composition of the coatings was analysed by energy dispersive X-ray spectroscopy (EDX). Significant variations in the coating weight, porosity and corrosion resistance were observed with the addition of nano TiO2 in the phosphating bath. Corrosion rate of nano TiO2 incorporated chemical phosphate coated samples was found to be 3.5 mpy which was 4 times less than the bare uncoated low carbon steel (~14 mpy). Electrochemical impedance spectroscopy studies revels in the reduction of porosity in nano TiO2 phosphate coated samples. It was found that nano TiO2 particles in the phosphating solution yielded phosphate coatings of higher coating weight, greater surface coverage and enhanced corrosion resistance than the normal zinc phosphate coatings (developed using normal phosphating bath).

The paper considers the possibility of rotating a small moon by 180 degrees from a dynamic point of view using two rocket engines mounted on the surface of the moon. A thrust control law for the engines which allows to turn the moon over and then stabilize it relative to a new equilibrium position by parrying a gravity gradient torque is proposed. The dynamic aspects of such an experiment are discussed using the example of the Mars satellite Deimos.

An interesting physical phenomenon was recently observed when a fresh-water basin is covered by a thin ice film that has properties similar to that of a rubber membrane. Surface waves can be generated under the action of wind on the air-water interface that contains an ice film. The modulation property of hydro-elastic waves (HEWs) in deep water covered by thin ice film blown by the wind with a uniform vertical profile is studied here in terms of the air-flow velocity versus a wavenumber. The modulation instability of HEWs is studied through the analysis of coefficients of the nonlinear Schrödinger (NLS) equation with the help of the Lighthill criterion. The NLS equation is derived using the multiple scale method in the presence of airflow. It is demonstrated that the potentially unstable hydro-elastic waves with negative energy appear for relatively small wind speeds, whereas the Kelvin–Helmholtz instability arises when the wind speed becomes fairly strong. Estimates of parameters of modulated waves for the typical conditions are given.

We report here the synthesis and characterization of new N-(3-(8-bromoimidazo[1, 2-a]pyridin-2-yl)-4-fluorophenyl)benzamide derivatives. This collection was obtained from 3-(8-bromoimidazo [1,2-a]pyridin-2-yl)-4-fluoroaniline(5). The family of new compounds was characterized by ¹H-NMR, ¹³C-NMR, FT-IR and LC-MS analysis.

Due to its potential harm to space payload, microwave corona breakdown of microstrip circuits has attracted much attention. This work describes an efficient way to suppress corona breakdown. Since corona breakdown threshold is determined by the highest electric field intensity at the surface of microstrip circuits, lacquer coating with thickness of tens of microns is sprayed on the top of microstrip circuits. The applied dielectric coating is used to move the discharge location away from circuit’s surface which is equivalent to reduce the highest electric field intensity on the in-terface of solid/air of the circuit and thus results into higher breakdown threshold. Two designs of classic coupled-line band-pass filter were used for verification. Corona experimental results at 2.5 GHz show that, in the interested low pressure range (100 to 4500 Pa), 5.3 dB improvement of mi-crowave corona breakdown threshold can be achieved for a filter with narrowest gap of 0.2 mm while its electrical performances like insertion loss, Q-factor are still acceptable. A threshold improvement prediction method is also presented and validated.

In polymer-based dental composites, wear is a three-body wear system mainly abrasive, because of the food particles and wear products suspended in the oral cavity, which are transferred to the microcavities of the surface of the replacements. Due to this fact, the incorporation of nanodiamond as reinforcement in these polymer matrix composites, which promotes the creation of a solid lubricant tribofilm surface could be advantageous. When nanodiamond is added in contents of 0.8, 1.6 and 3.2 wt %, an increase in microhardness from 95 up to 420 %, compared to the one of neat BisGMA/TEGDMA, is observed. Additionally, the incorporation of a content of 1.6 wt % is enough to cause a diminution of ~78 % in the friction coefficient and a reduction of the specific wear rate and Archard’s coefficient of ~50 %. Nevertheless, the addition of relatively high contents reduces the effectiveness of photoinitiation and UV-curing, which is related to the scattering and absorption of UV radiation by ND.

The oral administration of (R)-3-hydroxybutyl-(R)-3-hydroxybutyrate, allows inducing a beneficial level of blood ketone bodies without the adverse effects due to the adhesion to a ketogenic diet. Several studies documented the therapeutic effectiveness of the (R)-3-hydroxybutyl (R)-3-hydroxybutyrate in treating neurodegenerative diseases as well as its boosting activity of athletic and cognitive performances during prolonged physical exercises. Further studies considering this ketone body ester for therapy of other pathologies are also underway. In the present work, we describe the synthesis of (R)-3-hydroxybutyl-(R)-3-hydroxybutyrate through the enantioselective transesterification of racemic ethyl 3-hydroxybutyrate with (R)-1,3-butanediol catalyzed by immobilized Candida antarctica lipase B (CAL-B). The enantiopure (R)-1,3-butanediol was in turn obtained from the kinetic resolution of the racemate by CAL-B catalyzed acetylation with vinyl acetate. The economy of the synthetic procedure has been improved by recycling the unreacted (S) enantiomers of the ethyl 3-hydroxybutyrate and 1,3-buatnediol after stereochemical inversion achieved by tosylation and SN2 with ammonium acetate. The overall procedure allows to incorporate up to 70% of the starting racemic reagents into the final product.

A monolayer of endothelial cells (ECs) lines the lumen of blood vessels and as such provides a semi-selective barrier between the blood and the interstitial space. Compromise of the lung EC barrier due to inflammatory or toxic events may results in pulmonary edema, which is a cardinal feature of acute lung injury (ALI) and its more severe form, the acute respiratory distress syndrome (ARDS). The EC functions are controlled, at least in part, via epigenetic mechanisms mediated by histone deacetylases (HDACs). Zinc-dependent HDACs represent the largest group of HDACs and are activated by Zn2+. Members of this HDAC group are involved in the epigenetic regulation primarily via modifying the structure of chromatin upon removal of acetyl groups from histones. In addition, they can deacetylate many non-histone histone proteins, including those located in extra nuclear compartments. Recently, the therapeutic potential of inhibiting zinc-dependent HDACs for EC barrier preservation has gained momentum. However, the role of specific HDAC subtypes in EC barrier regulation remains largely unknown. This review aims to provide an update on the role of zinc-dependent HDACs in endothelial dysfunction and its related diseases. We will broadly focus on biological contributions, signaling pathways and transcriptional roles of HDACs in endothelial pathobiology associated mainly with lung diseases and we will discuss the potential of their inhibitors for lung injury prevention.

Ionizing radiation-induced damage in cancer and normal cells leads to apoptosis and cell death, through the intracellular oxidative stress, DNA damage and disorders of their metabolism. Irradiation doses that do not lead to the death of tumor cells can result in the emergence of radioresistant clones of these cells, due to the rearrangement of metabolism and the emergence of new mutations, including those in the genes responsible for DNA repair. The search for the substances capable of modulating the functioning of the tumor cell repair system is an urgent task. Here we analyzed the effect of cerium(III) fluoride nanoparticles (CeF3 NPs) on normal (human mesenchymal stem cells – hMSCs) and cancer (MCF-7 line) human cells after X-ray radiation. CeF3 NPs effectively prevent the formation of hydrogen peroxide and hydroxyl radicals in an irradiated aqueous solution, showing pronounced antioxidant properties. CeF3 NPs are able to protect hMSCs from radiation-induced proliferation arrest, increasing their viability and mitochondrial membrane potential, and, conversely, inducing the cell death of MCF-7 cancer cells, causing radiation-induced mitochondrial hyperpolarization. CeF3 NPs provided a significant decrease in the number of double-strand breaks (DSBs) in normal cells, while in MCF-7 cells the number of γ-H2AX foci dramatically increased in the presence of CeF3 4 hours after irradiation. In the presence of CeF3 NPs, there was a tendency to modulate the expression of most analyzed genes associated with the development of intracellular oxidative stress, cell redox status and the DNA repair system after X ray irradiation. Cerium-containing nanoparticles are capable of providing selective protection of normal cells from radiation-induced injuries and are considered as a platform for the development of promising clinical radioprotectors.

This research aims to develop an inexpensive ocean observation instrument with a project name is NOBEL (Nusantara Oceanography Backdoor Experiment Laboratory)-BOX. The device can be installed on all types of vessels and placed in a specific area to map the water conditions, providing accurate data for managing a marine area specifically to water quality. The principle of NOBEL-BOX is to attach sensors in a container connected to a microcontroller and then measure directly. The method employed includes experimental design, laboratory and field tests, and data evaluation to produce the necessary system and instruments. The design process involves the construction of the instrument and the fabrication of the device. This process includes creating three-dimensional sketches/drawings, designing microcontrollers and data transmission systems, and power capacity. The sensors attached to this device are surface water temperature, air temperature, salinity, dissolved oxygen, pH, and TDS. The testing phase includes data validation, testing of the device in the laboratory, and field testing. The laboratory and field tests showed that the device worked and provided data that can be used to analyze the seawater condition spatially and over time.

Influenza B virus (IBV) is considered a major respiratory pathogen responsible for seasonal respiratory disease in humans, particularly severe in children and the elderly. Seasonal influenza vaccination is considered the most efficient strategy to prevent and control IBV infections. Live attenuated influenza virus vaccines (LAIVs) are thought to induce both humoral and cellular immune responses by mimicking a natural infection, but their effectiveness have recently come into question. Thus, the opportunity exists to find alternative approaches to improve overall influenza vaccine effectiveness. Two alternative IBV backbones were developed with re-arranged genomes, re-arranged M (FluB-RAM) and a re-arranged NS (FluB-RANS). Both re-arranged viruses showed temperature sensitivity in vitro compared to the WT type B/Bris strain, were genetically stable over multiple passages in embryonated chicken eggs and were attenuated in vivo in mice. In a prime-boost regime in naïve mice, both re-arranged viruses induced antibodies against HA with hemagglutination inhibition titers considered of protective value. In addition, antibodies against NA and NP were readily detected with potential protective value. Upon lethal IBV challenge, mice previously vaccinated with either FluB-RAM or FluB-RANS were completely protected against clinical disease and mortality. In conclusion, genome re-arrangement renders efficacious LAIV candidates to protect mice against IBV.

Survival following Ebola virus (EBOV) infection correlates with the ability to mount an early and robust interferon (IFN) response. The host IFN-induced proteins that contribute to controlling EBOV replication are not fully known. Among the top genes with the strongest early increases in expression after infection in vivo is IFN-induced HERC5. Using a transcription- and replication-competent VLP system, we showed that HERC5 inhibits EBOV virus-like particle (VLP) replication by depleting EBOV mRNAs. The HERC5 RCC1-like domain was necessary and sufficient for this inhibition and did not require zinc finger antiviral protein (ZAP). Moreover, we showed that EBOV (Zaire) glycoprotein (GP) but not Marburg virus GP antagonized HERC5 early during infection. Our data identifies a novel ‘protagonist-antagonistic’ relationship between HERC5 and GP in the early stages of EBOV infection that could be exploited for the development of novel antiviral therapeutics.

Diet influences, and is influenced by, a wide range of socioeconomic, cultural, geographic, and genetic variables. Here we survey a matrix of such interactions as well as their connection to a variety of health outcomes, in a cohort of 689 diverse adults employed at Emory University and enrolled in the Center for Health Discovery and Well-Being (CHDWB) study. Principal component analysis (PCA) of the Block Food Frequency Questionnaire revealed seven PC cumulatively explaining 25.8% and each individually at least 2% of the proportional consumption of 110 food items. PC1 is strongly correlated with the Healthy Eating Index-2015 measure, and accordingly healthier scores associate with multiple measures of physical and mental health. It, as well as PC2 (likely a measure of food expense) and PC3 (carbohydrate versus protein consumption) show significant geographic structure across the Atlanta metropolitan area, correlating with race and ethnicity, income level, age and sex. Notably, a polygenic score for body mass index (BMI) consisting of 281 SNPs explains 2.8% of the variance in PC5, which is as strong as its association with BMI itself. PC5 appears to differentiate participants with respect to conscious eating behavior related to the choice of diet or comfort foods. Our analysis adds to the growing literature on factor analysis of socio-demographic influences on nutrition and health.

The Ti-6Al-4V alloy is widely used in the manufacture of components that should have low density, high corrosion resistance, and fatigue strength. The fatigue strength can be improved by surface modification. The aim of this study was to determine the influence of plasma nitriding on the fatigue behavior of Ti-6Al-4V alloy with a lamellar microstructure (Widmanstätten type). Nitriding was executed at 720 °C for 4 hours in an atmosphere with N₂, Ar and H₂. Samples microstructure characterization was carried out by X-ray diffraction analysis, optical microscopy and scanning electron microscopy. The average roughness of the specimens was determined, and fatigue tests were executed in a bending-rotating machine with reverse tension cycles (R= -1). X-ray diffraction analysis revealed the matrix phases α and β, and the phases Ɛ-Ti₂N and δ-TiN in the nitrided alloy. A nitrogen diffusion layer was formed between the substrate and the titanium nitrides. Plasma nitriding resulted in an increase in low cycle fatigue strength, whereas at high cycles, both conditions exhibit similar behavior. The fracture surface of the fatigue tested specimens clearly revealed the lamellar microstructure. The fracture mechanism appears to be due to cracking at the interface of α and β phases of the lamellar microstructure.

The adsorption of carbon dioxide on amino silanes-functionalized MCM-41 and SBA-15 materials is reported. The functionalization of mesoporous silicas was made by post-synthesis method, by impregnation of 3-aminopropyltriethoxysilane. The obtained materials were characterized by X-ray diffraction, scanning and transmission electron microscopies, nitrogen adsorption-desorption and X-ray photoelectron spectroscopy measurements. The carbon dioxide adsorption capacities for the samples were carried out under ambient pressures. The obtained results evidenced that amino-silanes with a terminal amine (–NH₂) were functionalized through covalent coupling of this group on the surface of the channels in the ordered mesoporous silica, meaning that the amine is anchored on the surface of the bigger pores of the MCM-41 and SBA-15 support. For functionalized materials, the CO₂ adsorption capacity of the AMCM-41 increased from 0.18 to 1.1 mmol·g⁻¹, whereas for ASBA-15, it was from 0.6 to 1.8 mmol·g⁻¹. The Lagergren kinetic algorithms were applied in order to validate the obtained results, evidencing the enhanced carbon dioxide adsorption capacity and stability of the functionalized ordered mesoporous molecular sieves.

The co-occurrence of different arboviruses, through (re)emergence episodes in a particular region, often exacerbates public health crises associated with these pathogens. Considering the Brazilian epidemiological panorama of arboviruses cocirculation, such as Dengue (DENV), Zika (ZIKV), and Chikungunya (CHIKV) viruses, the imminent emergence of Mayaro virus (MAYV) in urban areas, and the presence of susceptible human hosts, we looked into the coinfection and superinfection impact of CHIKV and MAYV replication in Aedes aegypti. Mosquitoes were coinfected and superinfected with CHIKV and MAYV by artificial blood-feeding, and infection (IR), dissemination (DR), transmission (TR) rates, and viral load were evaluated by qRT-PCR. Our findings suggest that, Ae. aegypti can simultaneously transmit CHIKV and MAYV in coinfection scenarios. However, in superinfection assays, the initial infection (either CHIKV or MAYV) adversely affected the transmission capacity of the subsequently acquired virus, indicating replication interference between the viruses. These results have important implications for public health management actions in the country, emphasizing complex arbovirus transmission scenarios and the associated epidemiological risks.

Dengue virus (DENV) and chikungunya virus (CHIKV) are reemergent arboviruses that are transmitted by mosquitoes of the Aedes genus. During the last several decades, these viruses have been responsible for millions of cases of infection and thousands of deaths worldwide. Therefore, several investigations were conducted over the past few years to find antiviral compounds for the treatment of DENV and CHIKV infections. One attractive strategy is the screening of compounds that target enzymes involved in the replication of both DENV and CHIKV. In this review, we describe advances in the evaluation of natural products targeting the enzymes involved in the replication of these viruses.

Hypertension (HT) is a very common risk factor and a frequent cause of morbidity and mortality worldwide mainly due to much increase in overweight (OW) and obesity that manifests in various forms of cardiovascular disease (CVD). There are a number of factors that may cause overweight hypertension (OHT). However, we planned to conduct the present work to study the HT and OHT men for finding the variation, interrelationship and association of important cytokines mainly serum leptin (Lep) and tumor necrosis factor-alpha (TNF-α), serum testosterone (ST), total cholesterol (TC) and inflammatory status by measuring interleukin-6 (IL-6). Three groups of subjects, the normal controls (NC; n:98; age range: 51-60 years), HT (n: 97; age range: 51-60 years) subjects, and OHT (n: 97; age range: 51-60 years) subjects were studied. Comparisons for Lep, ST, TNF-α, IL-6 and TC levels for the subject groups showed significant variations. The ST indicated significant difference only for NC vs. OHT. The IL-6 gave significant difference for NC vs. OHT and HT vs. OHT. The one-way ANOVA showed significant difference among groups for BMI, TC, IL-6, TNF-α, ST and Lep levels. Significant positive linear correlation for all groups among Lep, TNF-α, IL-6 and TC were found. The ST against TC for HT and OHT groups presented non-significant negative linear correlations. The ST showed significant negative linear correlation with other variables. Conclusively, the present study uncovers the interactive impact of serum leptin, TNF-α, testosterone, total cholesterol and IL-6 in hypertensive and overweight-related hypertensive men.

Human T-lymphotropic virus type 1 (HTLV-1) is associated with neurological, degenerative, and inflammatory diseases. Brazil has regions with high prevalence rates. The prevalence among relatives of positive people is high, and intrafamily transmission causes the conservation of the infection for different generations. The investigation of epidemiological and molecular factors may clarify the factors associated with the efficacy of intrafamilial transmission of HTLV-1. Objective: To analyze the epidemiological and molecular factors associated with intrafamilial transmission of HTLV-1 in an endemic area of Brazil. Material and Methods: A cross-sectional study investigated 72 relatives from 14 families with more than one infected. Epidemiological data were collected from all family members, and genetic sequencing was performed, phylogenetic analysis of 22 positive relatives. Results: The prevalence of HTLV-1 in families with infected people was 56.94% (41/72). Twelve vertical transmission routes and ten horizontal transmission routes were identified. Phylogenetic analysis demonstrated the absence of polymorphisms between infected mother and child sequences, while sequences of couples presented nucleotide divergence of up to 3%.among themselves. It was also identified in a family with an intrafamilial transmission with the occurrence of two viral strains. Conclusion: Molecular data confirmed intrafamilial transmission. They also indicated little genetic variability between the sequenced samples of family members and those deposited in GenBank used in this study. The absence of polymorphisms was observed in cases of vertical transmission, indicating a tendency to perpetuate identical sequences regardless of the time of acquisition of the infection.

Silk is a globally renowned abundant biopolymer obtained from various sources of the Lepidoptera family, among which the most commonly used and researched are spider silk and silk worm silk. All varieties of silk have beneficial characteristics such as high tensile strength, biocompatibility, producing a reduced immune response in a biological system, biodegradability, and the ability to withstand environmental stresses as well. These features make silk suitable for a number of applications as a biomaterial. The vast potential of silk and its proteins in cosmetics, oncology, tissue engineering, TOC screenings, for preserving food, cosmetic product as a silk gel and bioremediation makes it a well-sought biopolymer among researchers. Experiments over the years have revealed that biomaterials constituting silk are very potent but are yet to be scaled up for commercial uses, but the various advantageous properties of silk biomaterial far overshadows the impeding problems of production.

Fungal keratitis (FK) is a serious ocular infection that often poses significant diagnostic and therapeutic dilemmas. This study aimed to examine the causes, clinical characteristics, outcomes, and prognostic factors of FK in the UK. All culture-positive and culture-negative presumed FK (with complete data) that presented to Queen’s Medical Centre, Nottingham, and Queen Victoria Hospital, East Grinstead, between 2011 and 2020 were included. A total of 117 patients (n=117 eyes) with FK were included in this study. The mean age was 59.0±19.6 years (range, 4-92 years) and 51.3% patients were female. Fifty-three fungal isolates were identified from 52 (44.4%) culture-positive cases, with Candida spp. (33, 62.3%), Fusarium spp. (9, 17.0%), and Aspergillus spp. (5, 9.4%) being the most common organisms. Ocular surface disease (60, 51.3%), prior corneal surgery (44, 37.6%), and systemic immunosuppression (42, 35.9%) were the three most common risk factors. Hospitalisation for intensive treatment was required for 95 (81.2%) patients, with a duration of 18.9±16.3 days. Sixty-six (56.4%) patients required additional surgical interventions for eradicating the infection. Emergency therapeutic/tectonic keratoplasty was performed in 29 (24.8%) cases, though 13 (44.8%) of them failed at final follow-up. The final corrected-distance-visual-acuity (CDVA) was 1.67±1.08 logMAR. Multivariable logistic regression analyses demonstrated increased age, large infiltrate size (>3mm), and poor presenting CDVA (<1.0 logMAR) as significant negative predictive factors for poor visual outcome (CDVA of <1.0 logMAR) and poor corneal healing (>60 days of healing time or occurrence of corneal perforation requiring emergency keratoplasty; all p<0.05). In conclusion, FK represents a difficult-to-treat ocular infection that often results in poor visual outcome, with a high need for surgical interventions. Innovative treatment strategies are urgently required to tackle this unmet need.

In this work was investigated the potential of Bacillus subtilis UCP 0146 in the bioconversion of the medium containing 100% of cassava flour wastewater to obtain bioemulsifier. The evaluation of the production was carried out by the emulsification index (IE24) and surface tension (TS). The ionic charge, stability (temperature, salinity and pH measured by IE24 and viscosity), ability to remove and disperse oil and textile dye were investigated. B.subtilis produced an anionic bioemulsifier in the medium containing 100% of cassava wastewater in condition 4 of the factorial design (9% of the inoculum, at 35 °C and agitation of 100 rpm) with surface tension of 39mN/m, IE24 of 95.2 % and yield 2.69 g.L-1. Stability at different pH (2-8), temperatures (0-120ºC) and NaCl, dispersed (55.83 cm2-ODA) and reduced the viscosity of the burned engine oil (90.5 cP) , removed 94.4% petroleum and demonstrated efficiency in methylene blue removal (62.2%). The bioemulsifier and its synthesis from bacteria and also emphases on the role of surfactants in oil remediation.

This research investigates the relationship between the long-term orientation of top managers and their strategic decision-making processes, emphasising the comprehensiveness, speed, and inventiveness of decisions. The study employed structural equation modelling to look into the suggested connections using a sample of CEOs. The findings demonstrated a high and positive correlation between long-term orientation and decision comprehensiveness and speed, but not for decision creativity. The study contributes to the growing body of research on how human variations, such as temporal orientation, affect business outcomes and strategic decision-making. Moreover, the fact that a number of the results differed from those of other studies carried out in other contexts highlights how important it is to consider the industry and cultural environment when assessing these connections.

Aquaculture is rapidly becoming one of the pivotal sectors in the farm economy, driven by the increasing demand for high-quality animal protein at an affordable cost, especially with the escalating human population. However, the expansion of high-density fish populations also brings forth a challenge – the rapid transmission and spread of infectious disease agents among them. To combat this, vaccination is emerging as a reliable and standardized method for providing immunity against viral and bacterial outbreaks. The ideal vaccine is expected to be safe, effective, economical, and easily administered. The fish vaccination industry continually publishes new information on fish immunology and vaccinology, contributing to the improvement of vaccine formulation and efficacy. This review aims to offer insights into the current status of bacterial, viral, and parasitic diseases, discuss existing vaccinations, and address potential industry-threatening diseases like infectious edwardsiellosis, motile aeromonas septicemia, TiLV, salmon anemia, vibriosis, and white spot disease. Technological advancements have played a crucial role in enhancing our understanding of fish immunological mechanisms, leading to improved vaccine administration and the development of recombinant live attenuated, subunit, DNA, and RNA vaccines. However, challenges such as oral tolerance, vaccine degradation, and stressful environments persist, impacting vaccine efficacy. Addressing these challenges and gaining a deeper understanding of the fish immune system and host-pathogen interactions will be pivotal for future improvements, contributing to the sustainability of aquaculture and enhancing global food security.

Ultrafast pump-probe spectroscopic studies allow for deep insights into the mechanisms and timescales of photophysical and photochemical processes. Extracting valuable information from these studies, such as reactive intermediates' lifetimes and coherent oscillation frequencies, is an example of the inverse problems of chemical kinetics. This article describes a consistent approach for solving this inverse problem that avoids the common obstacles of simple least-squares fitting that can lead to unreliable results. The presented approach is based on the regularized Markov Chain Monte Carlo sampling for the strongly nonlinear parameters, allowing for a straightforward solution of the ill-posed nonlinear inverse problem. The software to implement the described fitting routine is introduced and the numerical examples of its application are given. We will also touch on critical experimental parameters, such as the temporal overlap of pulses and cross-correlation time and their connection to the minimal reachable time resolution.

A comprehensive review of uncertainties in power systems, covering modeling, impact, and mitigation, is essential to understand and manage the challenges faced by the electric grid. Uncertainties in power systems can arise from various sources and can have significant implications for grid reliability, stability, and economic efficiency. Australia, susceptible to extreme weather such as wildfires and heavy rainfall, faces vulnerabilities in its power network assets. The decentralized distribution of population centers poses economic challenges in supplying power to remote areas, a crucial consideration for emerging technologies emphasized in this paper. In addition, the evolution of modern power grids, facilitated by deploying the advanced metering infrastructure (AMI), has also brought new challenges to the system due to the risk of cyber-attacks via communication link. However, the existing literature lacks a comprehensive review and analysis of uncertainties in modern power systems, encompassing uncertainties related to weather events, cyberattacks, and asset management, as well as the advantages and limitations of various mitigation approaches. To fill this void, this review covers a broad spectrum of uncertainties considering their impacts on the power system and explores conventional robust control, and modern probabilistic and data-driven approaches for modelling and correlating the uncertainty events to the state of the grid for optimal decision making. This article also investigates the development of robust and scenario-based operations, control technologies for microgrids (MGs) and energy storage systems (ESSs), and demand-side frequency control ancillary service (D-FCAS) and reserve provision for frequency regulation to ensure a design of uncertainty-tolerance power system. This review delves into the trade-offs linked with the implementation of mitigation strategies, such as reliability, computational speed, and economic efficiency. It also explores how these strategies may influence the planning and operation of future power grids.

in this article, an ultra-wideband traveling wave antenna with antipodal topology is proposed. The proposed design is realized on an economical substrate with minimum thickness. The proposed design offers an ultra-wide bandwidth of 26 to 40 GHz, translating to 42%. The dimensions of the antenna are 20mm x10mm x 0.5mm indicating an electrically compact structure. The proposed antenna offers high front to back ratio of at least 10dB across the bandwidth of operation. The forward gain of the antenna varies from 4 to 7dBi in the afore-mentioned band. The pattern integrity is maintained throughout the band. The antenna is fabricated using the commercial photolithography process. A mutli-step topology of the antennas is also proposed for wide angular coverage. The coverage is greater than 150º with mutual coupling less than 25dB. These performance metrics is achieved with a very small footprint. Simulated and experimental results are presented in this paper.

An approach based on the OpenFOAM library has been developed to solve a high-speed, multicomponent mixture of a reacting, compressible flow. This work presents comprehensive validation of the newly developed solver called compressibleCentralReactingFoam with different supersonic flows, including shocks, expansion waves, and turbulence-combustion interaction. The comparisons of the simulation results with experimental and computational data confirm the fidelity of this solver for problems involving multicomponent high-speed reactive flows. The gas dynamics of turbulence-chemistry interaction are modeled using a partially-stirred reactor formulation and provide promising results to better understand the complex physics involved in supersonic combustors. A time-scale analysis based on local Damköhler numbers reveals different regimes of turbulent combustion. In the core of the jet flow, the Damköhler number is relatively high indicating that the reaction time scale is smaller than the turbulent mixing time scale. This means that the combustion is controlled by turbulent mixing. In the shear layer, where the heat release rate and the scalar dissipation rate have the highest value, the flame is stabilized due to finite rate chemistry with small Damköhler numbers and a high fraction of fine structure. This solver allows three-dimensional gas dynamic simulation of high-speed multicomponent reactive flows relevant to practical combustion applications.

Introduction: Research studies have shown that workplace stress and physical immobility can have a multi-layered effect on the human body. It causes degrade our physical functioning, and also having negative effect on our performance. Yoga techniques have proved to be effective at various levels, including physical, mental, and emotional health. Objective: This study aimed to determine the efficacy of a short-term Yoga protocol – Y break, for improved well-being and resilience to stress. It is intended to working population at work to de-stress, refresh, and refocus. Methods: This study was conducted as a single-arm, multi-centric, experimental pilot trial. Prominent yoga institutes in six metropolitan cities were engaged in this study. Participants practised specific yoga techniques for 5 minutes, twice a day, for 15 days. Pre & post-intervention data was collected along with feedback about the protocol. A self-report questionnaire, based on the Pancha kosha parameters, was used to record pre- and post-data. Results: The Statistical data analysis shown significant improvement in every parameter selected for the study. Conclusion: A five-minute yoga break can do wonders for the health-related parameters of the working population; therefore, it should be introduced in all organizations to improve the quality of life and work.

Attention deficit hyperactivity disorder (ADHD) results in various functioning impairments in children’s lives and families. Parents of children with ADHD report high levels of parenting stress, low levels of parental self-efficacy and use of more authoritarian and/or permissive parenting practices than parents of typically developing children. Intervention programs need to address both children’s and parents’ needs and multimodal intervention programs could cover this demand. The aim of this study was to examine the efficacy of “Child ViReal Support Program” - a multi-level evidence-based comprehensive program - on parenting stress, parental self-efficacy, parenting practices, and the core symptoms of children’s ADHD. Families with a child diagnosed with ADHD (n = 16) were randomly allocated to two groups (PC and CP; P = parent training, C = child training) and a cross-over design was utilized. Participating parents completed, in four different times during the study, the Parenting Stress Index-Short Form, the Parenting Sense of Competence Scale, the Parenting Styles and Dimensions Questionnaire-Short Version and the parent form of the ADHD Rating Scale-IV. Parents from both groups, after their participation in the parent training, demonstrated reduced parenting stress, enhanced parental self-efficacy and increased the employ of democratic parenting practices. More than that, they reported decreased levels of inattention and impulsivity/hyperactivity for their children. Evidence-based multi-level intervention programs could produce positive effects in parents and children by incorporating effective methods and tools in accordance with the needs and the demands of the family context.

Intestinal parasitic infections pose a grave threat to human health, particularly in tropical and subtropical regions. The traditional manual microscopy system of intestinal parasites detection remains the golden standard procedure for the diagnosis of parasites cyst or eggs, but this approach is costly time-consuming (30min/sample), highly tedious, and also required specialist. However, computer vision based on deep learning has made great stride in recent time. Despite the significant advances in deep convolutional neural network-based architectures, little research has been conducted to explore the potential of these techniques in the field of parasitology, specifically for intestinal parasites. Therefore, the goal of this research is to evaluate the performance of proposed state-of-the-art transfer learning architecture for detecting and classifying intestinal parasite eggs from images. We would ensure that patients receive prompt treatment while also relieving experts of extra work if we used such an architecture. Here, in stage first, we applied image pre-processing and augmentation to the dataset, and in stage second, we utilized the YOLOv5 algorithms for detection and classification and then compared their performance based on different parameters. Our algorithms achieved a mean average precision of 97% approximatiely and 8.5 ms detection time per sample for 5,393 intestinal parasite images. Thus, this approach may form a solid theoretical basis for real-time detection and classification in routine clinical examinations while accelerating the process to satisfy increasing demand.

DNS is a necessary infrastructure for accessing the Internet. Until now, privacy protection in domain name resolution has mainly focused on end user privacy (communication encryption between clients and DNS full-service resolver). For this reason, communication between DNS full-service resolver and authoritative DNS servers is still done in plaintext. A DNS request from a DNS full-service resolver to an authoritative DNS server does not pose a privacy issue because the source IP address that comes from is the DNS full-service resolver. However, in recent years, there have been reports of specific techniques for identifying the privacy of previously unknown institutions by analyzing the logs of authoritative DNS servers. In order to further strengthen privacy in DNS communication, we proposed an architecture to encrypt all DNS communication in DoH, created a prototype environment, and investigated performance evaluation. The main contributions of this paper are threefold. First, we proposed the Full-DoH DNS architecture. This is a domain name resolution framework designed specifically for institutional privacy. Second, we evaluated the proposed architecture through a prototype implementation. Finally, we discussed related issues to the proposed architecture.

This paper introduces extensions H4,p and X8,p of Horn’s double hypergeometric function H4 and Exton’s triple hypergeometric function X8, taking into account recent extensions of Euler’s beta function, hypergeometric function, and confluent hypergeometric function. Among the numerous extended hypergeometric functions, the primary rationale for choosing H4 and X8 is their comparable extension type. Next, we present various integral representations of Euler and Laplace type, Mellin and inverse Mellin transforms, Laguerre polynomial representation, transformation formulae and a recurrence relation for the extended functions. In particular, we provide a generating function for the X8,p and several bounding inequalities for the H4,p and X8,p.

Small and medium-sized enterprises (SMEs) help and support the country in financial and business aspects and employs in the country, overcomes unemployment, and creates job opportunities in different sectors of the country. The study aims to know the entrepreneurial-specific factors like age, gender, education, experience, and skills used as predictors for access to financing of small firms in Khyber Pakhtunkhwa. The questionnaire is used for data collection, and about 204 questionnaires were distributed, of which 192 returned and analyzed through binary logistic regression. The study results reveal that age and level of education have been found significant while gender, experience and skills have insignificant with the access to finance in Khyber Pakhtunkhwa, Pakistan.

Pre-monsoon dust aerosols over Indian regions are closely linked to the monsoon dynamics and Indian summer monsoon rainfall. Past observational studies have shown a decline in dust loading over the Indian landmass potentially caused by changing rainfall patterns over the desert regions. Such changes are expected to have far reaching impact on regional energy balance and monsoon rainfall. Using a regional climate-chemistry model, RegCM4.5 with an updated land module, we have simulated the long-term (2001-2015) changes in dust over the arid and semi-arid dust source regions of the North-Western part of the sub-continent. It is found that the area-averaged dust aerosol optical depth (AOD) over the arid and semi-arid desert regions has declined by 17% since the start of this millennium. The rainfall over these regions exhibits a positive trend of 0.1 mm day^-1year^-1 and a net increase of > 50%. The wet deposition is found to be dominant and ~5 fold larger in magnitude over dry deposition and exhibits total changes of ~ 79 % and 48% in the trends in atmospheric dust. As a response, significant change in the surface (11%), top of the atmosphere radiative forcing (7%), and widespread atmospheric cooling are observed in short wave domain of radiation spectrum, over the Northern part of the Indian landmass. Such quantification and long term change studies are necessary for understanding the regional climate change and the water cycle.

In this paper we provide a highly selected review and synthesis on some of the recent and notable contribution to research in portfolio analysis. A unique perspective on this development in the literature is offered in this paper by judiciously identifying a few sample eigenvalues adjustment patterns in a portfolio that leads to an improvement in the out-of-sample portfolio Sharpe ratio when the population covariance matrix admits a high-dimensional factor model. These patterns unveil a key insight into a portfolio performance improvement and shed an important light on the effectiveness of a few recently introduced ”robust to estimation errors” covariance matrix estimation approaches, which were not originally designed with the goal to improve the out-of-sample portfolio performance.

Carbohydrate and menthol mouth-swilling have been used to enhance exercise performance in the heat. However, these strategies differ in mechanism and subjective experience. Participants (n=12) sat for 60 min in hot conditions (35°C; 15±2%), following a 15 min control period, participants undertook three 15 min testing blocks. A randomised swill (Carbohydrate; Menthol; Water) was administered per testing block (one swill every three minutes within each block). Heart rate, tympanic temperature, thermal comfort, thermal sensation and thirst were recorded every three minutes. Data were analysed by ANOVA, with carbohydrate intake controlled for via ANCOVA. Small elevations in heart rate were observed after carbohydrate (ES: 0.22 ± 90% CI: -0.09 to 0.52) and water swilling (0.26; -0.04 to 0.54). Menthol showed small improvements in thermal comfort relative to carbohydrate (-0.33; -0.63 to 0.03) and water (-0.40; -0.70 to -0.10), and induced moderate reductions in thermal sensation (-0.71; -1.01 to -0.40 and -0.66; -0.97 to -0.35, respectively). Menthol reduced thirst by a small to moderate extent. These effects persisted when controlling for dietary carbohydrate intake. Carbohydrate and water may elevate heart rate, whereas menthol elicits small improvements in thermal comfort, moderately improves thermal sensation and may mitigate thirst; these effects persist when dietary carbohydrate intake is controlled for.

Critically the paper argues that a truly people-centered technology supported chronic care system can only be designed by understanding and responding to the needs, attributes and capabilities of the most vulnerable in society. The paper suggests innovative ways of supporting interactions with these ‘end-users’ and highlights how reflection on these approaches can contribute to emancipating both the health system to move towards more socially inclusive e-health solutions.

Plants are affected by soil environments to the same extent they affect soil functioning through interactions between environmental and genetic factors. Here, five plant species (broad bean, pea, cabbage, fennel, and olive) grown under controlled pot conditions were tested for their ability to differently stimulate the degradation of standard litter. Litter, soil C and N contents and soil microbial abundance were measured. The architecture and morphological traits of roots systems were also evaluated by using specific open-source software (SmartRoot). Soil chemical and microbiological characteristics were significantly influenced by the plant species. Variations in soil C/N dynamics were correlated with the diversity of root traits among species. Early-stage decomposition of the standard litter changed on the basis of the plant species. The results indicated that key soil processes are governed by interactions between plant roots, soil C and N, and the microbial metabolism that stimulate decomposition reactions. This, in turn, can have marked effects on soil chemical and microbiological fertility, both fundamental for sustaining crops, and can promote the development of new approaches for optimizing soil C and N cycling, managing nutrient transport, and sustaining and improving net primary production.

The process model is very essential for the model based control design. The model of the process can be identified using system identification algorithm. The system identification is done through the open loop and closed loop approaches. In this work, the lab scale conical tank setup configured as a non square MIMO system. The conical tank system is identified through the both appraoches, the effectiveness and need of the both approaces are discussed. Based on the open loop identified model the controller designed and the controller implemented in the real time the to record the process data. From this data the closed loop identification are conducted uisng N4SID algorithm. The controller seetings are obtained using the smith predcitor based IMC based PI controller for the obtained model. The proposed identification algorithm and controller tuning show the better reults over the conventional method. Moreover, this method is applicable for all the non square MIMO system.

Background: There are major air pollution monitoring gaps in sub-Saharan Africa. Developing capacity in the region to conduct air monitoring in the region can help estimate exposure to air pollution for epidemiology research. The purpose of our study is to develop a land use regression (LUR) model using low-cost air quality sensors developed by a research group in Uganda (AirQo). Methods: Using these low-cost sensors, we collected continuous measurements of fine particulate matter (PM2.5) between May 1, 2019 and February 29, 2020 at 22 monitoring sites across urban municipalities of Uganda. We compared average monthly PM2.5 concentrations from the AirQo sensors with measurements from a BAM-1020 reference monitor operated at the US Embassy in Kampala. Monthly PM2.5 concentrations were used for LUR modeling. We used eight Machine Learning (ML) algorithms and ensemble modeling; using 10-fold cross validation and root mean squared error (RMSE) to evaluate model performance. Results: Monthly PM2.5 concentration was 60.2 µg/m³ (IQR: 45.4-73.0 µg/m³; median= 57.5 µg/m³). For the ML LUR models, RMSE values ranged between 5.43 µg/m³ - 15.43 µg/m³ and explained between 28% and 92% of monthly PM2.5 variability. Generalized additive models explained the largest amount of PM2.5 variability (R²=0.92) and produced the lowest RMSE (5.43 µg/m³) in the held-out test set. The most important predictors of monthly PM2.5 concentrations included monthly precipitation, major roadway density, population density, latitude, greenness, and percentage of households using solid fuels. Conclusion: To our knowledge, ours is the first study to model the spatial distribution of urban air pollution in sub-Saharan Africa using air monitors developed from the region itself. Non-parametric ML for LUR modeling performed with high accuracy for prediction of monthly PM2.5 levels. Our analysis suggests that locally produced low-cost air quality sensors can help build capacity to conduct air pollution epidemiology research in the region.

Boundary behavior of a given important function or its limit values are essential in the whole spectrum of mathematics and science. We consider some tractable cases of limit values in which either a difference of two ingredients or a difference equation is used coupled with the relevant functional equations to give rise to unexpected results. This involves the expression for the Laurent coefficients including the residue, the Kronecker limit formulas and higher order coefficients as well as the difference formed to cancel the inaccessible part, typically the Clausen functions. We also state Abelian results which yield asymptotic formulas for weighted summatory function from that for the original summatory function

The human antibody response to influenza virus infection or vaccination is as complicated as it is essential for protection against flu. The constant antigenic changes of the virus to escape human herd immunity hinder the yearly selection of vaccine strains since it is hard to predict which virus strains will circulate for the coming flu season. A "universal" influenza vaccine that could induce broad cross-influenza subtype protection would help to alleviate this burden. However, the human antibody response is intricate and often obscure, with factors like antigenic seniority or original antigenic sin "OAS", and back-boosting ensuring that each person mounts a unique immune response to infection or vaccination with any new influenza virus strain. Notably, the effects of existing antibodies on cross-protective immunity after repeated vaccinations are unclear. More research is needed to characterize the mechanisms at play, but traditional assays such as hemagglutinin inhibition (HAI) and microneutralization (MN) are excessively limited in scope and too resource-intensive to effectively meet this challenge. In the past ten years, new multiple dimensional assays (MDAs) have been developed to help overcome these problems by simultaneously measuring antibodies against a large panel of influenza hemagglutinin (HA) proteins with a minimal amount of sample in a high throughput way. MDAs will likely be a powerful tool for accelerating the study of the humoral immune response to influenza vaccination and the development of a universal influenza vaccine.

The diffraction-like process displayed by a spatially localized matter wave is here analyzed in a case where the free evolution is frustrated by the presence of hard-wall-type boundaries (beyond the initial localization region). The phenomenon is investigated in the context of a nonrelativistic, spinless particle with mass m confined in a one-dimensional box, combining the spectral decomposition of the initially localized wave function (treated as a coherent superposition of energy eigenfunctions) with a dynamical analysis based on the hydrodynamic or Bohmian formulation of quantum mechanics. Actually, such a decomposition has been used to devise a simple and efficient analytical algorithm that simplifies the computation of velocity fields (flows) and trajectories. As it is shown, the development of space-time patters inside the cavity depends on three key elements: the shape of the initial wave function, the mass of the particle considered, and the relative extension of the initial state with respect to the total length spanned by the cavity. From the spectral decomposition it is possible to identify how each one of these elements contribute to the localized matter wave and its evolution; the Bohmian analysis, on the other hand, reveals aspects connected to the diffraction dynamics and the subsequent appearance of interference traits, particularly recurrences and full revivals of the initial state, which constitute the source of the characteristic symmetries displayed by these patterns. It is also found that, because of the presence of confining boundaries, even in cases of increasingly large box lengths, no Fraunhofer-like diffraction features can be observed, as happens when the same wave evolves in free space. Although the analysis here is applied to matter waves, its methodology and conclusions are also applicable to confined modes of electromagnetic radiation (e.g., light propagating through optical fibers).

Adenovirus is a family of double stranded DNA viruses that are a significant cause of upper respiratory tract infections in children and adults. Less commonly, the adenovirus family can cause a variety of gastrointestinal, ophthalmologic, genitourinary, and neurologic diseases. Most adenovirus infections are self-limited in the immunocompetent host and are treated with supportive measures. Fatal infections can occur in immunocompromised patients and less frequently in the healthy. Adenoviral vectors are being studied for novel biomedical applications including gene therapy and immunization. In this review we will focus on the spectrum of adenoviral infections in humans.

Clock Network Design (CDN) is a critical step while designing any Integrated-Circuits (ICs). It holds vital importance in the performance of entire circuit. Due to continuous scaling, 3D ICs stacked with TSV are gaining importance, with an objective to continue with the Moore's law. Through-Silicon-Via (TSV) provides the vertical interconnection between two die, which allows the electrical signal to flow through it. 3D ICs has many advantages over conventional 2D planar ICs like reduced power, area, cost, wire-length etc. The proposed work is mainly focused on power reduction and obstacle avoidance for 3D ICs. Various techniques have already been introduced for minimizing clock power within specified clock constraints of the 3D CND network. Proposed 3D Clock Tree Synthesis (CTS) is a combination of various algorithms with an objective to meet reduction in power as well as avoidance of obstacle or blockages while routing the clock signal from one sink to other sink. These blockages like RAM, ROM, PLL etc. are fixed during the placement process. The work is carried out mainly in three steps- first is Generation of 3D Clock tree avoiding the blockages, then Buffering and Embedding and finally validating the results by SPICE simulation. The experimental result shows that our CTS approach results in significant 9% reduction in power as compare to the existing work.

Pigs are a social species and they stablish hierarchies for a better use of resources and to reduce conflicts. However, in pig production, the opportunities for growing can differ in dominant and subordinate animals. In the present study a system was tested to perform a Dominance versus Subordinate test in growing pigs to investigate how the hierarchy affects feeding behaviour, growth and gut microbiota assessed in faeces. 64 animals housed in eight different pens were used, with four castrated males and four females in each one, weighing 18kg at arrival and maintained during the whole growing period, until 140 kg. Three stool samplings were obtained from the animals directly from the anus to avoid contamination of the faeces on 58, 100 and 133 days after the start of the study to investigate the microbiota composition. The dominant animals had higher gains during the growing period that the subordinate. In addition, they were performing more visits to the feeder throughout the day. Differential abundance patterns were observed in five bacterial genera, Oliverpabstia, Peptococcus, and Faecalbacterium being more abundant in dominant animals and Holdemanella and Acetitomaculum being overrepresented in subordinate ones. This microbial biomarker accurately classified dominant versus subordinate groups of samples with an AUC of 0.92.

Cellular aging is considered as one of the main factors leading to female infertility. The process called “inflammaging”, which was proposed by C. Franceschi in 2014 is characterized by chronic asymptomatic inflammation state resulting to whole body aging and age-associated diseases. In this work the inflammaging model was developed; markers expression associated with SASP (senescence associated secretory phenotype) and cell aging were verified in endometrial cells; the correlation analysis with the known inflammaging markers was done; as well as the age dynamic of markers expression in the groups of young reproductive age and late reproductive age was evaluated. For the first time, the comparative study of the expression of the key signalling molecules involved in the mechanisms of the aging was carried out: IL-6, IL-8, IL-1a, MMP3, SIRT1,6, TERF-1, CALR in endometrial cells in the age aspect and under the influence of the genotoxic stress. The SASP phenotype characterizing the phenomenon of inflammaging can be significantly expanded by the including of the studied molecules - SIRT-1, SIRT-6, TERF, CALR, that we demonstrated for the first time. These signalling molecules may be new therapeutic targets for the age-associated female reproductive system diseases treatment.

This paper presents a novel segmentation algorithm specially developed for applications in 3D point clouds with high variability and noise, particularly suitable for heritage building 3D data. The method can be categorized within the segmentation procedures based on edge detection. In addition, it uses a graph-based topo-logical structure generated from the supervoxelization of the 3D point clouds, which is used to make the clo-sure of the edge points and to define the different segments. The algorithm provides a valuable tool for generating results that can be used in subsequent classification tasks and broader computer applications dealing with 3D point clouds. One of the characteristics of this segmentation method is that it is unsupervised, which makes it particularly advantageous for heritage applications where labelled data is scarce. It is also easily adaptable to different edge point detection and supervoxelization algorithms. Finally, the results show that the 3D data can be segmented into different architectural elements, which is important for further classification or recognition. Extensive testing on real data from historic buildings demonstrates the effectiveness of the method. The results show superior performance compared to three other segmentation methods, both globally and in the segmentation of planar and curved zones of historic buildings.

Background: breastfeeding is the optimal nourishment for infants and recommends that children commence breastfeeding within the first hour of birth and be exclusively breastfed for the initial 6 months of life. Our objective was to determine which factors related to mothers could influence the degree of exclusive breastfeeding during hospitalization, as well as to assess breastfeeding mothers' attitudes towards breastfeeding. Methods: A multicenter cross-sectional study was undertaken in the healthcare area of Santiago de Compostela, Spain. The reduced Iowa Infant Feeding Attitude Scale (IIFAS-s) was employed to gauge maternal attitudes toward feeding their baby. Results: 64 women were studied. The overall score of IIFAS-s (mean ± standard deviation) was 36.95 ± 5.17. No use of pacifier by the newborn was associated with a positive attitude for breastfeeding. Having previous children (ORa=6,40; IC95% 1,26 – 32,51) and previous experience with breastfeeding (ORa=6,70; IC95% 1,31 – 34,27) increase the likelihood of exclusive breastfeeding during admission. Conclusions: It is important to identify the factors that contribute to increasing the probability that mothers choose exclusive breastfeeding. We must guide our training efforts to these factors.

Novel freeform optical design methods can be classified in two categories, relevant to the generation of a starting point or to the development of new optimization tools. In this paper, we design a freeform TMA optimized with different surface representations using either a differential ray-tracer as a new optimization tool, or commercial ray tracer (ANSYS-ZEMAX OpticStudio) for comparison. For differential ray tracing, we use FORMIDABLE (Freeform Optics Raytracer with Manufacturable Imaging Design cApaBiLitiEs): an optical design library with differential ray tracing and NURBS optimization capabilities under European Software Community License (ESCL). NURBS allow to represent a freeform surface without needing any prior knowledge on the surface, such as the polynomial degree in polynomial descriptions. However, commercial optical design software are designed to optimize polynomial surfaces, but are not well-suited to optimize NURBS surfaces. This requires to use a custom optical design library. To demonstrate the interest of using NURBS representation, freeform telescopes are independently optimized with NURBS using FORMIDABLE, or XY polynomials with OpticStudio over different iteration cycles. We then compare the resulting systems using their RMS Field Maps to assess the optimization quality of each surface representation. We also provide a full-system comparison, including mirror freeform departures. This study shows that NURBS can be a relevant alternative to XY polynomials for freeform optimization of reflective 3-mirror telescopes.

In this study, we adopt a unique approach by utilizing the responses of human autonomic systems to gauge the abundance of pollutants in inhaled air. Air pollution has numerous impacts on human health on a variety of time scales. This study uses biometric observations of the human autonomic response on the second timescale to investigate how the human body autonomically responds to inhaled pollutants in microenvironments, including particulate matter. PM1 and PM2.5, carbon dioxide (CO2), nitrogen dioxide (NO2), and nitric oxide (NO) on small temporal and spatial scales. These pollutants are exemplars of the wider human exposome. We compare two experimental approaches that use a similar methodology, employing a biometric suite to capture the physiological responses of cyclists and sensors to monitor the pollutants in the air surrounding them. We employ machine learning algorithms to estimate the levels of these pollutants and decipher the body’s automatic reactions to them. We observed high precision in predicting PM1, PM2.5 and CO2 using a limited set of biometrics from participants. Although the predictions for NO2 and NO were reliable at lower concentrations, the precision varied throughout the data range. This discrepancy suggests the potential to improve our models with more comprehensive data collection or advanced machine learning techniques.

In the context of improving aircraft safety, this study focuses on the development and evaluation of a graphene-based ice detection system using an environmental chamber. The research is driven by the need for more accurate and efficient ice detection methods, crucial in mitigating in-flight icing hazards. The methodology employed involves testing flat graphene-based sensors in a controlled environment, simulating a variety of climatic conditions that could be experienced in an aircraft during its entire flight. The environmental chamber enabled precise manipulation of temperature and humidity levels, thereby providing a realistic and comprehensive test bed for sensor performance evaluation. The results were significant, revealing the graphene sensors’ heightened sensitivity and rapid response to the subtle changes in environmental conditions, especially the critical phase transition from water to ice. This sensitivity is the key to detecting ice formation at its onset, a critical requirement for aviation safety. The study concludes that graphene-based sensors, tested under varied and controlled atmospheric conditions, exhibit a remarkable potential in enhancing ice detection systems for aircraft. Their lightweight, efficient and highly responsive nature makes them a superior alternative to traditional ice detection technologies, paving the way for more advanced and reliable aircraft safety solutions.

As part of the Copernicus programme of the European Union (EU), the European Space Agency (ESA) has developed and is currently operating the Sentinel-2 mission that is acquiring high spatial resolution optical imagery. This paper provides a description of the calibration activities and the current status of the mission products validation activities. Measured performances, from the validation activities, cover both Top-Of-Atmosphere (TOA) and Bottom-Of-Atmosphere (BOA) products. Results presented in this paper show the good quality of the mission products both in terms of radiometry and geometry and provide an overview on next mission steps related to data quality aspects.

A biobased and conductive ink composed of elastomeric vinyl acetate-vinyl laurate copolymer (PVAc-VL) and carbon nanofibers (CNF) has been developed to create stretchable and flexible tactile devices (taxels) for robotics and prosthetics applications. The ink can be sprayed onto elastomeric surfaces (Ecoflex) to produce an electronic skin for applications such as the iCub robot and the Hannes prosthetic hand. Electron microscopy analysis confirms good dispersion of the CNF within the ink, and the ink remains conductive even after 150 mechanical cycles of stretching up to 25% and unloading. Compression tests up to 50% deformation show a small influence on the coating, and stretching cycles allow for rearrangement of the CNF, improving the electrical behaviour due to mechanical energy dissipation. The measured electrical performance exhibits a twofold increase in the R/R0 ratio, succeeded by a rapid decline (recovery), and eventually stabilizes near the initial value, indicating enhanced electronic performance.

Background: Peloids are therapeutic agents used in thermal and thalasso centers for curative, preventive, and skin care purposes. Marine peloids are those that include seawater and algae, both macro and/or microalgae. The aim of this study is to investigate the suitability of a marine peloid composed by seawater, clay and microalgae for thalasso-wellness and dermocosmetic uses; Methods: the thermophysical properties of the marine peloid were determined and compared with a non-marine peloid using different techniques as densimetry, conductimetry, calorimetry, and viscometry; skin hydration was also measured by means of Corneometry; Results: marine peloid has been shown to be suitable for thermotherapy and thalaso-wellness treatments as its thermophysical properties were similar to other peloids used for this purpose; marine peloids also showed to improve skin hydration after seven days of treatment; Conclusions: this research provides a comprehensive study of the thermophysical properties of a marine peloid composed by clay, seawater and microalgae for thalasso-wellness and cosmetic uses, as well as its moisturizing properties, highlighting its potential as a valuable natural product for skin care applications as well as for wellness treatments in form of cataplasm, poultices and/or wraps.

Solid polymer electrolytes and composite polymer electrolytes serve as crucial components in all-solid-state energy storage devices. Structural batteries and supercapacitors present a promising alternative for electric vehicles, integrating structural functionality with energy storage capability. However, despite their potential, these applications are hampered by various challenges, particularly in the realm of developing new solid polymer electrolytes that require more investigations. In this study, novel solid polymer electrolytes and composite polymer electrolytes were synthesized using epoxy resin blends, ionic liquid, lithium salt, and alumina nanoparticles, and subsequently characterized. Among the formulations tested, the optimal system, designated as L70P30ILE40Li1MAl2 and containing 40 wt.% of ionic liquid and 5.7 wt.% of lithium salt, exhibited exceptional mechanical properties. It displayed a remarkable storage modulus of 1.2 GPa and reached ionic conductivities of 0.085 mS/cm at 60°C. Furthermore, a proof-of-concept supercapacitor was fabricated, demonstrating the practical application of the developed electrolyte system.

The quest for surgical advancements regarding the enhancement of the submental and cervicofacial regions has witnessed a remarkable upsurge in recent years. Informed patients are actively seeking sophisticated plastic surgery techniques to achieve comprehensive rejuvenation in these specific areas. Common complaints expressed by these patients include sagging of the jawline, the emergence of deep perioral wrinkles, and the formation of "marionette lines" within the lower third of the face. Furthermore, the manifestation of age-related signs, including neck laxity, submental adipose accumulation, "witch's chin" deformity, and weakened platysma musculature, are common within this anatomical region. This literature review aims to summarize the recent technical improvements, historical evolution, indications, postoperative care, and challenges for facial rejuvenation of the lower third of the face and neck. Lastly, the application of minimally invasive procedures as part of a comprehensive approach to an aging face will also be discussed.

There is increased concern that the quality, generalizability, and reproducibility of biomedical research can be influenced by the sex of animals used. We studied the differences between male and female mice in response to invasive pulmonary mucormycosis including susceptibility to infection, host immune reaction, and responses to antifungal therapy. We used diabetic ketoacidotic (DKA) or neutropenic mice infected with either Rhizopus delemar or Mucor circinelloides. The only difference detected was that when DKA mice were infected with M. circinelloides, female mice were more resistant to infection than male mice (median survival time of 5 vs. 2 days for female and male mice, respectively). However, a 100% lethality was detected among infected animals of both sexes. Treatment with either liposomal amphotericin B (L-AMB) or posaconazole (POSA) protected mice from infection and eliminated the difference seen between infected but untreated female and male mice. Treatment with L-AMB consistently outperformed POSA in prolonging survival and reducing tissue fungal burden of DKA and neutropenic mice infected with R. delemar or M. circinelloides, in both mouse sexes. Although little difference was detected in cytokine levels among both sexes, mucormycosis infection in the DKA mouse model induced more inflammatory cytokines/chemokines involved in neutrophil (CXCL1) and macrophage (CXCL2) recruitment vs. uninfected mice. As expected, this inflammatory response was reduced in the neutropenic mouse model. Our studies show that there are few differences between female and male DKA or neutropenic mice infected with mucormycosis with no effect on the outcome of treatment or host immune response.

Thermodynamics of protein-ligand interactions seems to be associated to a narrow range of Gibbs Free Energy. As a consequence, a linear enthalpy-entropy relationship showing an apparent Enthalpy-Entropy compensation (EEC) is frequently observed associated to the study of protein-ligand interactions. This EEC affects negatively the design and discovery of new and more efficient drugs capable of binding protein-targets with a higher affinity. Originally attributed to experimental errors, compensation between H and TS values is a real observable fact, although its molecular origin has remained obscure and controversial. Herein we show the results of a data search of G values of 2558 protein-ligand interactions and 3025 “in vivo” ligand concentrations from the Protein Data Bank bind Database and the Metabolome Data Base (2020). These results, together with the mechano-statistical interpretation of the thermodynamic properties leads to the conclusion that the EEC has no basis in statistical thermodynamics. It can be plausibly explained as a consequence of the narrow range of G associated to protein-ligand interactions. The Gaussian distribution of the G values matches very well with that of ligands. These results suggest the hypothesis that the set of G values for the protein-ligand interactions is the result of the evolution of proteins. The conformation versatility of present proteins and the exchange of thousands (even millions) of minute amounts of energy with the environment may have functioned as a homeostatic mechanism to make G of proteins adaptive to changes in availability of ligands, and therefore achieve the maximum regulatory capacity of the protein function. Finally, a plausible strategy to avoid the EEC is suggested.

Nowadays, one of the greatest challenges in Data Meshes revolves around detecting and creating Data Domains and Data Products for providing the ability to adapt easily and quickly to changing business needs. This requires a disciplined approach to identify, differentiate and prioritize distinct data sources according to their content and diversity. The current paper tackles this highly com-plicated issue and suggests a standardized approach that integrates the concept of Data Blueprints with Data Meshes. In essence, a novel standardization framework is proposed that creates Data Products using a metadata semantic enrichment mechanism, the latter also offering Data Domain readiness and alignment. The approach is demonstrated using real-world data produced by mul-tiple sources in a poultry meat production factory. A set of functional attributes is used to compare qualitatively the proposed approach against existing data structures utilized in storage architectures with quite promising results. Finally, experimentation with different scenarios varying in data product complexity and granularity suggests successful performance.

Entrepreneurial activities in economic and social domains are considered one of the conditional pillars for successful transformation of resource-rich countries to sustainable, knowledge-based and diversified economies. However, there is no, and cannot be, a single recipe for such a transformation as every country or region needs to develop its own strategy, policy toolbox and implementation plan depending on its historical and present socio-economic make up and trajectory. This paper advances the qualitative findings of a previously published work to delve deeper into the complexities of entrepreneurship within resource-based economies, with a particular focus on Qatar. Employing a mixed methodology that blends explanatory and quantitative analysis, this paper aims to validate and refine the entrepreneurship framework proposed previously, ensuring its relevance and adaptability to Qatar's unique economic and cultural context, and its extendibility to similar resource-rich country settings. It systematically focuses on discovering various social, economic, and environmental dimensions critical to fostering entrepreneurship in resource-rich countries. These include examining government policies, cultural and social factors, financial support mechanisms, innovation ecosystem, technology adaptation, and digitization. A primary component of this study is the methodological approach, which includes collecting and analyzing quantitative data through a survey developed based on previous findings on qualitative explorations. This approach allows for an objective assessment of the effectiveness of the proposed recommendations. The paper presents a set of detailed recommendations aimed at various stakeholders, including government bodies, supporting agencies, and entrepreneurs themselves. These recommendations encompass integrating entrepreneurship education into academic curricula, increasing easy access to business and market information, simplifying, unifying and streamlining policies and procedures, and adapting them into the legal system. Other important and unique recommendations include establishing a country-wide entrepreneurship free-zone (Ent-Q) and facilitating its operations though an online digital platform (Ryadah), allocating certain percentage of governmental ministries’, agencies’ as well as large corporations’ budgets into innovative small business development programs and preferred purchasing from small business. These initiatives are validated to become effective tools and avenues to create a conducive entrepreneurial environment, facilitating transformation into a diversified, knowledge-based and sustainable economy. The expected outcomes of implementing these recommendations include an increase in the efficiency of entrepreneurship-related policymaking, a rise in the number, quality and impact of entrepreneurs, and the sustained diversification of the economy into non-oil/gas sectors and actors. In conclusion, this paper provides a comprehensive set of strategies and recommendations expected to significantly contribute to the nurturing and growth of entrepreneurship in resource-based economies.

The limits for recording weak signals for electrochemical seismic sensors are determined by their self-noise. At the same time, the noise nature is complex and not fully understood. In this work, for the first time, in addition to the frequency dependences of the noise amplitude, the difference in the phases of the noise currents of the cathodes of an electrochemical sensor has been studied. It has been established that at low frequencies the cathode currents change in an-tiphase. As the frequency increases, the phase difference becomes random. At the same time, the frequency at which the phase difference changes depend on the interelectrode distance; the clos-er the electrodes are located to each other, the greater it is. Physically, this effect is explained by the transition from noise caused by the integral flow of the working fluid to noise associated with vortex flows, the size of which depends on frequency. Thus, a new way of studying noise makes it possible to identify its physical nature and develop new methods of reduction.

ShK domain-containing proteins are peptides found in different parasitic and venomous organisms. From a previous transcriptomic dataset from Bursaphelenchus xylophilus, a plant-endoparasitic nematode that infects forest tree species, we identified 96 transcripts potentially as ShK domain-containing proteins with unknown function in the nematode genome. This study aimed to characterize and explore the functional role of genes encoding ShK domain-containing proteins in B. xylophilus biology. We selected and functionally analyzed nine candidate genes specific from B. xylophilus. In situ hybridization revealed expression of one B. xylophilus ShK in the pharyngeal gland cells, suggesting their delivery into host cells. Most of the transcripts are highly expressed during infection and showed a significant upregulation in response to peroxide products compared to the nematode catalase enzymes. We reported for the first time, the potential involvement of ShK domain genes in oxidative stress, suggesting that these proteins may have an important role protecting or modulating the reactive oxygen species (ROS) activity of the host plant during parasitism.

Study of differential equation theory has come a long way with applications in the various fields. In 1961, Zygmund and Calderón introduced the notion of derivatives on metric Lr which proved to be better in applications than approximate derivatives. But most of the studies involved are on fuzzy set theory, so it seems likely that intuitionistic fuzzy Lr - norm - based derivatives deserve study. In the study, the fuzzy derivative is extended to intuitionistic fuzzy derivatives with respect.to Lr - norm - based derivatives using intuitionistic fuzzy number valued functions. The efficacy of the proposed method is established by proving the associated theorems along with numerical examples. Further, the Cauchy problem is also studied with respect to intuitionistic fuzzy setting.

In this paper, existence and stability results of non-local integro-differential equation with Hilfer derivative of order ω∈(1,2) have been investigated. In this derivative is applied in RLC circuit equation of various fractional order. To proposed problem the existence solutions are derived using Schaefer’s fixed point theorem and the Banach contraction principle is using for uniqueness results. To demonstrate the effectiveness and applicability of our theoretical conclusions and two-step Lagrange polynomial interpolation were used to solve four numerical results.

The Sakha people have a long history of use of medicinal plants in traditional medicine and healing practices. This article explores the use and naming practices found with 10 plants that grow in far northeastern Russia, in the Arctic and Subarctic zones of the Republic of Sakha (Yakutia). A field survey of 2500 participants was used to identify the most widely used medicinal plants, their names, and uses. Findings were double-checked with published resources. A small set of criteria are used in naming practices. These practices are based on the plant’s appearance, its habit, or in some way are related to their use, indexing the disease, or the diseased organ, or the result of healing. We find robust knowledge and practice of traditional medicine across the Sakha population, and deep knowledge of plants among Sakha herbalists, healers and shamans.

(1) Background: A history of TB is a known risk factor for long-term respiratory impairment affecting lung functions in both restrictive and obstructive lung disease. (2) Methods: We analyzed data from the NHANES 1 Epidemiologic Follow-up Study (NHEFS), a longitudinal study conducted on non-institutionalized adult US population, ages 25-74 years. Approximately 93 percent (n=13,383) of the cohort was successfully traced by the end of the survey period and was available for analysis. The final adjusted model included age groups, gender, family income, lifetime smoking, BMI, and frequency of alcohol consumption as potential confounders. (3) Results: Estimated hazards ratio of developing Emphysema during follow-up in individuals that had a past diagnosis of TB was 54% lower (95% CI = 0.35, 0.61) as compared to individuals with no past TB, after controlling for potential confounders and using proportional hazards regression appropriate to the complex sample design. The association, however, was not statistically significant (HR = 0.862, p-value = 0.38) when only self-reported history of TB was considered as the exposure. (4) Conclusion: Tuberculosis (self-reported or LTBI) was strongly (but inversely) associated with Emphysema incidence. The association was not statistically significant with only self-reported history of TB as exposure.

In this paper a more flexible extension of the Fréchet distribution is introduced. The new distribution is defined by means of the stochastic representation as the quotient of two independent random variables, a Fréchet distribution and the power of a random variable with uniform distribution in the interval (0,1). We will call this new extension the Slash Fréchet distribution and one of its main characteristics is that its tails are heavier than the Fréchet distribution. The general density of this distribution and some basic properties are determined. Its moments, skewness coefficients and kurtosis are calculated. In addition, the estimation of the model parameters is obtained by the method of moments and maximum likelihood. Finally, two applications with real data are performed by fitting the new model and comparing it with the Fréchet distribution.

Egyptians face a significant challenge in meeting the growing population's water needs for agriculture and food production. To address this, policymakers and researchers have implemented the National Great Project for Lining and Rehabilitation of All Open Canals of the Irrigation Network to reduce irrigation water losses through seepage, evaporation, and evapotranspiration. The current field study evaluates water losses from the Al Maanna canal network in Assiut governorate, Middle Egypt, using empirical formulas and field ponding methods. The obtained results indicated that the Moleth-Worth formula is more compatible and gives results that are in good agreement with the field measurements carried out. The estimated seepage losses from the existing, distorted Al Maanna canal network using the Moleth-Worth formula and field ponding method were about 2.07 and 2.20 million m3/month, respectively. Also, the calculated maximum evaporation and evapotranspiration losses were about 0.086 and 1.133 million m3/month, respectively. Consequently, the total water losses might be about 3.42 million m3/month, representing nearly 13.63% of the Al Maanna canal’s total discharge. After completing the lining process, seepage losses from lined canals were determined to be only about 0.472 million m3/month using the ponding method, while evaporation and evapotranspiration losses will be significantly decreased after canal rehabilitation. Hence, lining the Al Maanna canal network can decrease the total water losses by about 84%, which is sufficient to recommend and encourage the lining processes where the value of the gained quantities of water exceeds all the implementation expenses, in addition to other moral, cultural, and environmental gains.

In this review, our goal is to design and test quantum-like algorithms for Artificial Intelligence (AI) in open systems to structure a human-machine team to be able to reach its maximum performance. Unlike the laboratory, in open systems, teams face complexity, uncertainty and conflict. All task domains have complexity levels, some have low, and others high levels. Complexity in this new domain is affected by the environment and the task, which are both affected by uncertainty and conflict. We contrast the individual and interdependence approaches to teams. The traditional and individual approach focuses on building teams and systems by aggregating the best available information for individuals, their thoughts, behaviors and skills. Its concepts are characterized chiefly by one-to-one relations between mind and body, a summation of disembodied individual mental and physical attributes, and degrees of freedom corresponding to the number of members in a team; however, this approach is characterized by the many researchers who have invested in it for almost a century with few effects that can be generalized to human-machine interactions; by the replication crisis of today (e.g., the invalid scales for self-esteem, implicit racism, and honesty); and by its many disembodied concepts. In contrast, our approach is based on the quantum-like nature of interdependence. It allows us to theorize about the bistability of mind and body, but it proposes a measurement problem and a non-factorable nature. Bistability addresses team structure and performance; the measurement problem solves the replication crisis; and the non-factorable aspect of teams reduces the degrees of freedom and the information derivable from teammates to match findings by the National Academies of Science. We begin with a review of the science of teams and a focus on human-machine team research in the laboratory versus the open; justifications for rejecting traditional social science while supporting our approach; a full understand of the complexity of the domain, tasks in the domain, and how teams address both; the mathematics involved; a review of results from our model versus the open field; a discussion of the results; conclusions; and the path forward to successfully advance the science of interdependence and autonomy.

The proliferation of the Internet of Things (IoT) has revolutionized traditional services, giving rise to emerging smart infrastructures by connecting the physical and digital worlds. Sensory data is essential in IoT-based systems for providing context-aware and location-based services. Hence, the accurate localization of IoT devices is paramount. Anchor misplacement can significantly affect location information and coverage services in IoT. We study the effect of anchor misplacement in typical IoT settings where sensors are randomly deployed, can be mobile and may belong to multiple providers. We identify sensing coverage holes formed by anchor misplacement and analyze their presence and impact. To mitigate the impact of anchor misplacement on network reliability, we propose a framework to identify the affected sensor nodes and then identify and remove misplaced anchor nodes. The validity of our approach is verified, and its effectiveness is demonstrated by several experiments with different network topologies and parameters. Our results are promising and can be utilized in multiple coverage applications, such as smart agriculture systems and habitat monitoring, regardless of the sensors or deployment types. It also sheds light on best practices and methods for a reliable design of IoT-based systems.

The composite coatings prepared by mixing the 5 wt.% of polyaniline with commercial alkyd-based paint are applied on carbon steel. The polyaniline emeraldine chloride salt is prepared by procedure recommended by IUPAC, deprotonated by ammonia hydroxide, and reprotonated with the sulfamic, succinic, citric, and acetic acids with different doping degrees or oxidation states. The steel samples with base and composite coatings are immersed in 3% NaCl and the corrosion current density is determined after 96 h in-site using ASTM 1,10-phenanthroline method. The samples are also inspected by the optical microscope. It is shown that composite coatings reduce the possibility of blister formations and delamination. The corrosion current density and the appearance of the corrosion products, which area is determined by ImageJ softer, closely follow the initial oxidation state of the polyaniline. The role of the initial state of the polyaniline is discussed. It is suggested that such behavior could be connected with the oxygen reduction reaction mechanism that proceeds mainly via two electron paths on the polyaniline particles, releasing a much smaller amount of hydroxyl ions, responsible for the delamination and blister formations of the commercial coatings.

The cosmetic industry recognizes the importance of natural sources for functional active constit-uents in meeting consumer expectations for safer and more sustainable beauty care products. Ma-rine macroalgae have emerged as promising resources, offering diverse bioactive constituents with potential applications in cosmetics. In this study, we investigated the biochemical profile of Padina boergesenii, a marine macroalga, using various methods to assess its potential as a cosmetic ingre-dient. The Fourier Transform Infrared (FTIR) analysis revealed the presence of distinct bioactive functional groups associated with numerous skin-beneficial compounds. Furthermore, the ethanolic and methanolic extracts of P. boergesenii were subjected to Gas Chromatography-Mass Spectrom-etry (GC-MS) analysis, which identified a total of six and fifteen significant phytocompounds, re-spectively. Additionally, a comprehensive phytochemical profiling of P. boergesenii was performed using High-Resolution Liquid Chromatography-Mass Spectrometry Quadrupole Time-of-Flight (HRLCMS-Q-TOF), highlighting the presence of various terpenoids, alkaloids, peptides, fatty acids, derivatives, and coumarins with potential cosmetic applications. To further assess its potential as a cosmetic ingredient, P. boergesenii was subjected to several additional estimations. Pigment estima-tion revealed the presence of specific pigments, while the determination of total phenol content and total protein content highlighted the richness of these bioactive components. The antioxidant analysis using the DPPH method demonstrated the antioxidant potential of P. boergesenii extracts, suggesting their ability to combat oxidative stress-related skin damage. Moreover, the tyrosinase inhibition assay indicated the inhibitory effect of P. boergesenii extracts on tyrosinase activity, which is relevant for addressing hyperpigmentation concerns. Furthermore, the elemental composition of P. boergesenii was evaluated using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), revealing that silicon (Si) exhibited the highest concentration among the measured elements, while copper (Cu) displayed the lowest concentration. Additionally, HRLCMS-Q-TOF analysis was employed to quantify 21 amino acids, with aspartic acid exhibiting the highest con-centration (2034.99 nmol/mL), and tyrosine demonstrating the lowest concentration (233.26 nmol/mL). The accuracy of all the measured elements and amino acids was deemed acceptable. Taken together, the findings of this study highlight the potential of P. boergesenii as an effective ingredient for enhancing skin health. The incorporation of seaweed-based bioactive components, such as P. boergesenii, into cosmetic products is increasingly common due to their beneficial effects on the skin. Further exploration of the potential applications of P. boergesenii in the cosmetics in-dustry is warranted to harness its valuable bioactive properties.

We are already more than year away from the pandemic period, followed by a year within a global economic crisis and a war in Ukraine, with the marks and the changes caused in all parameters of life becoming clear now including food choice motives of citizens worldwide. In this study we investigate the changes in food choice motives caused by the pandemic to college students in Greece in the 10 key food motives namely health, convenience, sensory, appeal, nutritional quality, moral concerns, weight control, mood and stress, familiarity, price, and shopping frequency and behavior. A self-response questionnaire survey was carried out in January to February 2023 on a sample of 1017 college students’ participants through the Google platform. Basic statistical tools, combined with cross and Chi-square tests were used in order to analyze the collected data. The results show that students exhibit quiet and very important preferences on health, convenience, weight control, and mood and stress. Food choices related to sensory appeal, nutritional quality, and familiarity is of less importance for the students, similarly to ethical concerns expect the environmental impact of the food which is high to their concern. The motive which continues to have the highest concern for students before and after the pandemic is price looking for value for money food (88.8%), not to be expensive (80.7%), and be cheap (78.7%). The shopping frequency and behavior motives, which were changed during the pandemic, have now returned to the motives of the pre pandemic period, with purchase of foods from supermarket (29%), local grocery (37.6%), and only 12.3% via online, and 20.4% by delivery, weekly or every two weeks. They prefer to cook at home full meals is now very high reaching 74.4%, avoiding eating at a restaurant or fast food (only 27% positives answers). Our findings indicate that students have already returned to their food choice motives of the period before COVID-19 except the home cooking food which is now high in their preference.

Objective: To investigate commonalities and variations in the learning outcomes, curriculum content, assessment methods and competencies in undergraduate orthodontic curricula globally. Methods: This scoping review followed the updated methodological guidance proposed by the Joanna Briggs Institute and reported in accordance with the Preferred Reporting Items for Systematic reviews and Meta-Analyses extension for Scoping Reviews (PRISMA-ScR). A search on electronic databases PubMed, Scopus and Embase was conducted for the last 25 years. Google Scholar was used to identify eligible unpublished and grey literature. Results: The total number of reports identified was 231. After removal of 62 duplicates, 169 reports were included in the title and abstract screening. Finally, 17 studies were included in the review which included 13 cross-sectional surveys, three expert panel proceedings and one discussion paper. Marked variations were reported in undergraduate orthodontic curricula and competency assessments at the level of individual countries, regionally as well as globally. The challenges of imparting competency in orthodontic treatment during undergraduate dental education are also acknowledged. Conclusion: Lack of consistency in undergraduate orthodontic education is evidenced by several Delphi studies to develop consensus on orthodontic teaching in undergraduate programs. A common message emanating from the available studies on undergraduate orthodontic education seems to emphasize a focus on assessment and diagnosis of orthodontic treatment needs of patients and a basic understanding of contemporary treatment options to facilitate patient referral.

Working memory (WM) is a brain system for short-term storage and manipulation of information and plays an important role in complex cognitive tasks. In the synaptic theory of WM memorized elements are stored in the form of short-term potentiated connections in a sample population of neurons. In this paper, we show that such populations can be formed due to the mechanisms of spike-timing-dependent plasticity (STDP) – the phase dependence associated with the ratio of the pulse times of the interacting neurons. We propose a WM model considering two types of plasticity: short-term plasticity and STDP. We have shown formation of neuronal clusters encoding items in the WM model, that can be formed by external stimulation of a group of neurons due to the mechanisms of STDP and hold and reactivated by short-term plasticity mechanisms. The dynamic formation of neuronal clusters instead of pre-formed clusters gives additional flexibility to the model.

In this work, we adapt the fine-tuning algorithm of the Naïve Bayesian (FTNB) classifier to make it more suitable for imbalanced datasets. In particular, we boost misclassified instance probability terms by an amount that is disproportional to the harmonic mean of actual and predicted classes. The intuition is that discriminative attributes when the instance is misclassified would have small probability term pair values in both the actual class due to data scarcity and the predicted class due to weak correlation. Conversely, if both values are relatively high, then the attribute has good data coverage (support) and it should not be a cause for misclassification. Since the harmonic average is dominated by the smaller value and we have an imbalanced dataset, we should enact a large update if both or either term probabilities of actual and predicted classes are small. We used several benchmark datasets (60 different balanced and imbalanced datasets) to determine if the poor performance of the NB classifier is due to the scarcity of data and compared the performance of the proposed algorithm with NB, original FTNB, and other relatively new SOTA Ensemble Imbalanced Classifiers. Our empirical results reveal that the new proposed algorithm significantly outperforms all other classifiers.

COVID-19, caused by the severe acute respiratory syndrome coronavirus 2 (SARS CoV-2), is estimated to have caused over 6.5 million deaths to date worldwide. The emergence of fast-evolving SARS-CoV-2 variants of concern alongside increased transmissibility and/or virulence as well as immune and vaccine escape capabilities highlight the urgent need for more effective antivirals to combat the disease in the long run along with regularly updated vaccine boosters. One of the early risk factors identified during the COVID-19 pandemic was that men are more likely to get infected by the virus, more likely to develop severe disease and exhibit higher likelihood of hospitalisation and mortality rates compared to women. An association exists between SARS-CoV-2 infectiveness and disease severity with sex steroid hormones and in particular androgens. Several studies underlined the importance of the androgen-mediated regulation of the host protease TMPRSS2 and the cell entry protein ACE2 as well as the key role of these factors in the entry of the virus into target cells. In this context, modulating androgen signalling is a promising strategy to block viral infection and antiandrogens could be used as a preventative measure at the pre- or early-hospitalisation stage of COVID-19 disease. Different antiandrogens, including commercial drugs used to treat metastatic castration-sensitive prostate cancer and other conditions, have been tested as antivirals with varying success. In this review, we summarise the most recent updates concerning the use of antiandrogens as prophylactic and therapeutic options for COVID-19.