This study explores the effects of tempering on the precipitation behavior and impact toughness of high-nickel steel. The specimens underwent double quenching at 870°C and 770°C, followed by tempering at various temperatures. Advanced characterization techniques including optical microscopy (OM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) were used to elucidate precipitation phenomena. Additionally, electron backscatter diffraction (EBSD) was employed to assess the misorientation distribution after tempering. Charpy impact tests were performed on specimens tempered at different temperatures to evaluate their toughness. The findings reveal that with increasing tempering temperature, the fraction of low-angle grain boundaries decreases, which correlates positively with enhanced impact toughness. The impact toughness peaks at 580°C and then diminishes with further temperature increases.

The savings behavior of individuals has been a topic of both macroeconomic and policy importance throughout history. Theoretical and empirical research offers strong evidence that savings are the result of a number of demographic and economic factors working together to produce long-term, sustainable economic growth. This study therefore looked at how domestic savings affected South Africa's economic growth between 1970 and 2022. The ARDL framework was used to analyze data that came from the World Bank and the South African Reserve Bank. The results of the study demonstrate that corporate savings have a major effect on economic growth, especially over the long term. When corporate savings rise by 1%, the economy expands by 3.12%. On the other hand, savings by the government and the general public, especially in the long run, have no appreciable impact on economic growth. Given that domestic savings mobilization is the most suitable channel for financing capital accumulation to support economic growth and development, the study suggests reviewing current policies to encourage domestic savings mobilization.

The higher education sector in Africa has experienced remarkable growth over the past decades, enrolling and graduating millions of students annually. Despite this progress, high unemployment rates among graduates and pervasive underdevelopment have raised questions about the relevance of higher education in Africa. Critics have intensely scrutinized the quality of curricula, highlighting a significant mismatch between the skills offered and the demands of the job market. This disconnect is often due to curricula that are unresponsive to both job requirements and students' needs. Enhanced pedagogical approaches are essential to address this issue. Community engagement and service learning (CE&SL) offer promising solutions by bridging the gap between theoretical knowledge and practical application. Recognizing the potential benefits, higher education institutions across the continent are gradually integrating CE and SL into their teaching and research frameworks. However, the adoption of these approaches has been slow. This paper explores the opportunities and challenges hindering the effective and widespread implementation of CE and SL in African higher education institutions and proposes practical strategies to overcome these obstacles. By embracing these innovative approaches, African universities can better prepare graduates for the dynamic job market and contribute more effectively to the continent's development.

Indole derivatives are key components of natural products and possesses a wide range of biological and pharmaceutical applications. Here we present the synthesis of a new indole derivative namely 2-(1-ethyl-5-nitro-1H-indole-7-carbonyl) butyl 4-methylbenzenesulfonate (5). The structural elucidation of 5 was accomplished through comprehensive spectroscopic analysis, including Fourier-transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR), and high-resolution mass spectrometry (HRMS). Our molecular docking study revealed that compound 5 exhibits strong affinity towards Tyrosinase, making it a promising candidate as an antioxidant agent. Keywords: Indole derivative; Tosyl group; Molecular docking; Antioxidant agent.

Diagnosis of encephalitis is a challenging problem due to the heterogeneity of clinical presentations and the myriad of aetiology. The objective was to determine the aetiology, clinical features, laboratory parameters, radiological findings and in-hospital outcome of acute encephalitis syndrome (AES) cases in Myanmar. Methods: A prospective analytic study was conducted at Neuromedical Ward of Yangon General Hospital during March to August 2023. 81 AES cases were enrolled and cerebrospinal fluids (CSF) samples were collected. Qiastat ME Panelwas used to detect viral, bacterial and fungal pathogens. Results: 17 out of 81 (21%) cases were non-encephalitis with alternative definite diagnosis. Among the remaining 64 encephalitis cases, the exact infectious and immune aetiologies were identified in 31/64 (48.4%); 26/31 cases (83.9%) were infectious causes and 5/31 patients (16.1%) were immune encephalitis. Among the infection causes, six Herpes Simplex Virus-1, one bacteriologically confirmed and seven probable Mycobacterium tuberculosis, three Haemophilus influenzae, two Streptococcus pneumoniae, one Streptococcus pyogenes, one Varicella-Zoster Virus (Ramsay Hunt Syndrome with meningoencephalitis), two Cryptococcus neoformans infected patients and rare causes such as Listeria monocytogenes, Burkholdelria cepacia, Sphingomonas paucimobilis and Aspergillus were identified. One case was dual infection with Haemophilus influenzae and Cryptococcus neformans. Abnormal protein levels and CSF pleocytosis were significantly higher among bacterial causes (P<0.05). 6.45% (2/31) of encephalitis patients with identified causes and 12.12% (4/33) of those without organism identified had bad outcome. Conclusions: Herpes encephalitis and tuberculous meningoencepalitis were the commonest. This study highlighted that molecular testing with multidisciplinary approach is required to ensure the right treatment on time.

Type 2 diabetes mellitus (T2DM) is a global health concern driven by factors such as obesity, sedentary behavior, and poor diet. This study uses data from the 2017-18 Bangladesh Demographic and Health Survey (BDHS) to analyze regional and individual predictors of diabetes and predi-abetes. Employing a Bayesian multinomial mixed-effects model, we account for regional varia-bility and individual factors like age, gender, BMI, residence, wealth, education, employment, and hypertension. Our results indicate significant regional differences and associations between de-mographic and health-related factors with diabetes risk. Younger individuals and those with higher BMI are more likely to be diabetic, while hypertension significantly increases diabetes risk. We applied machine learning (ML) models, including logistic regression, decision trees, k-nearest neighbor, linear discriminant analysis, and random forest, to classify diabetic status using these predictors, assessing their accuracy through 10-fold cross-validation. Logistic regression and linear discriminant analysis demonstrated robust performance across various response distributions. Simulation studies further examined the impact of different response distributions on model performance, revealing significant differences in classification accuracies. This approach of esti-mating parameters with a Bayesian model, applying ML for prediction, and conducting simulation studies to explore various scenarios highlights the importance of integrating these methodologies for effective diabetes prediction, providing insights for public health strategies to mitigate T2DM's impact.

The genetic bases of Alzheimer's disease (AD) and frontotemporal dementia (FTD) have been comprehensively studied, which is not the case for atypical cases not classified into these diagnoses. In the present study, we aim to contribute to the molecular understanding of the development of non-AD and non-FTD dementia by surveying rare pathogenic variants. The analysis was performed on 91 patients, the DNA samples of which were pooled and then subjected to whole exome sequencing. Among detected variants two are rare pathogenic and show significant difference in frequency between the analyzed pool and gnomAD Bulgarian control exomes. The rs373478202, G&gt;T, B9D1 variant, most likely present in heterozygous state; is causative for the autosomal recessive ciliopathy- Joubert syndrome, which involves specific CNS malformation. The rs148918985, C&gt;T, ASS1 variant leads to arginosuccinate enzyme deficiency and in compound heterozygosity with other rare pathogenic variant detected in the same gene causes the late-onset form of citrullinemia type I. This disorder causes high ammonia levels, which can lead to cerebral dysfunction. In conclusion, the detected rare pathogenic variants suggest that, in certain cases, the development of non-AD and non-FTD dementia can be mediated by structural alterations in neuronal cilia or by hyperammoniemia.

Artificial insemination (AI) is considered as the most efficient feasible tool to improve the dairy cows’ profitability and productivity. In bovines, AI helps to promote genetic improvement and can positively impact the rural economy. The achievement of education in rural populations was one of the Millennium Development Goals (MDGs), made by the United Nations. During the last World Summit on Sustainable Development (WSSD), it was concluded that most of the world’s poor, illiterate and undernourished population lives in rural areas; therefore, access to education is considered one of the greatest challenges for governments in countries with developing economies. To determine the effects of a theoretical-practical training program related to rural management and leadership, AI, and bovine genetic improvement, on the perception and level of knowledge in a rural Colombian population that has been affected by the armed conflict. Phase 1. Included the practical and theoretical training of undergraduate animal sciences students in three dimensions rural management; leadership (D-ML), AI in bovines (D-AI), and genetic improvement (D-GI) after training students were evaluated and selected according to their skills, characteristics, solidarity skills, and their social sensitivity was identified. Phase 2. Included the socioeconomic characterization and training of rural residents by students and field experts in three dimensions D-ML, D-AI, and D-GI. After training we evaluated the perception and level of knowledge before and after training in 63 rural residents using an evaluative instrument. The data before and after (post-test) of the theoretical-practical training, were analyzed to obtain a statistical significance. The perception of knowledge in rural residents was low for general knowledge (2.48±0.76, p ˂ 0.05), D-ML (2.89±1.18, p ˂ 0.05) and D-AI and D-GI (2.17±0.83, p ˂ 0.05). On the other hand, before the theorical-practical training the level of general knowledge was 45.9%, however, after the training increased at 77.6% (p<0.01), while the level of knowledge for the D-AI was increased from 38.5 % to 80.6 % (p ˂ 0.05) after training. Regarding the level of knowledge for the D-GI pre-training was 50.8 and increased to 73.0% (p<0.01) then after. Finally, the level of knowledge for the D-ML was increased (p<0.01) from 54.8 before training to 75% after training. Altogether, the rural extension programs contribute to the closing of knowledge gaps in relation to the use of reproductive biotechnologies and bovine management in rural areas affected by armed conflict.

Background: Even though a number of studies have verified the positive effect of physical activity (PA) on self-related health (SRH) no previous research has examined this association among pediatric patients with Type 1 diabetes mellitus (T1DM). Objective: The purpose of this study was to investigate the association between regular physical activity (PA) and self-rated health (SRH) in pediatric patients with Type 1 diabetes mellitus (T1DM) who lacked diabetes care. Methods: We conducted a retrospective study among pediatric patients with T1DM who lacked diabetes care and were enrolled in a diabetes education program between January 2011 to January 2015 at the endocrinology clinic of Seoul National University Children’s Hospital in South Korea. The eligible participants for this study were 37 pediatric patients with T1DM aged 9 to 17 years. PA was divided into regular PA and muscle strength exercise to analyze the relationship with SRH using binomial logistic regression analysis. Results: The results showed SRH of pediatric patients with T1DM who did not engage in regular PA was significantly lower than those who did (OR in regular PA = .199 [95% CI: .040, .995]; OR in regular muscle strength exercise = .097 [95% CI: .023, .825]). Conclusions: In conclusion, regular PA and muscle strength exercise in pediatric patients with T1DM who lacked diabetes care were effective in improving their SRH. A systematic plan is required to enhance regular PA for pediatric patients with T1DM.

Burnout, characterized by emotional and physical exhaustion, poses a significant challenge to adolescent athletes, particularly in high-intensity sports like basketball. Emotional Intelligence (EI) is the ability to manage emotions, which is negatively associated with burnout. Emotional labor, including strategies of surface acting (SA), deep acting (DA), and genuine expression (GE), is a potential key role in emotion management between EI and burnout for athletes. This study aims to investigate the relationship between EI and burnout, as well as the mediating role of emotional labor strategies among adolescent basketball players. Our cross-sectional study, conducted in youth sports schools in four different places of China, involved 260 basketball players. Our study found EI to be negatively associated with burnout. SA and GE were identified as significant mediators in this relationship, with SA positively associated with burnout and GE negatively associated. These findings suggest that enhancing EI and optimizing emotional labor strategies could be key in mitigating burnout among young athletes, thereby improving their well-being and performance.

Robotic path planning and navigation algorithms enable autonomous mobile robots to navigate complex environments. These algorithms allow robots to be deployed in search and rescue missions, where they can locate victims in hazardous areas inaccessible to humans. Additionally, autonomous driving algorithms hold the potential to revolutionize transportation by enabling self-driving cars to navigate roads safely and efficiently. This paper focuses on developing an algorithm for autonomous navigation of the mobile robot (Tortoise bot) using robot operating system (ROS), based on publish-subscribe communication facilitating seamless interaction between various nodes. Tortoise Bot is a differential wheeled robot whose movement is based on two separately driven wheels placed on either side of the robot body. The Raspberry Pi acts as the controller. A 360-degree LiDAR and RGB-D camera are used for creating a 3D map of the environment. Various state-of-the art software tools, such as Gazebo, Ubuntu, MATLAB and RPI imager are used. Initially, a simulation based on simple obstacle avoidance is done using gazebo and MATLAB. Another simulation based on trajectory tracking is implemented using MATLAB to study the kinematic model. Online navigation and path planning are executed with the help of teleoperation and Dynamic Window Approach algorithm. A novel Wander algorithm is created that avoids obstacles on its path. Object recognition is also implemented during autonomous navigation using YOLO.

(1) Telemedicine in diabetic retinopathy (RD) screening is effective but does not reach the entire diabetes population. The use of portable cameras and artificial intelligence (AI) can help diabetes screening. (2) Methods: We evaluated the ability of two handheld cameras, one based on a smartphone and the other on a smartscope, to obtain images comparing OCT. Evaluation was done in two stages, the first by two retina specialists and the second using an artificial intelligence algorithm that we developed. (3) Results: The retina specialists report that the smartphone images must mydriasis in all cases compared to 73.05% of the smartscope images and 71.11% of the OCT images. Images were ungradable in 27.98% of the retinographs with the smartphone and 7.98% with the smartscope. The detection of any-DR using the AI algorithm showed that the smartphone obtained lower recall values (0.89) and F1scores (0.89) than the smartscope, with 0.99. The detection of Mild-DR using the smartphone also obtained low results (146 retinographs) compared to the smartscope (218 retinographs). (4) Conclusions: The use of handheld devices together with AI algorithms for reading retinographs can be useful for DR screening, although these devices need to improve the ease image acquisition through small pupils.

Three different populations of sulfated polysaccharides can be found in the cell wall of the red alga Botryocladia occidentalis. In a previous work, the structures of the two more sulfated polysaccharides were revised. In this work, NMR-based structural analysis was performed on the least sulfated polysaccharide and its chemically modified derivatives. Results have revealed the presence of both 4-linked α- and 3-linked β-galactose units having the following chemical features: more than half of the total galactose units are not sulfated, the α-units occur primarily as 3,6-anhydro-galactose units either 2-O-methylated or 2-O-sulfated, and the β-galactose units can be 4-O-sulfated or 2,4-O-disulfated. SPR-based results indicated weaker binding of the least sulfated galactan to thrombin, factor Xa, and antithrombin, but stronger binding to heparin cofactor II than unfractionated heparin. This report together with our previous publication completes the structural characterization of the three polysaccharides found in the cell wall of the red alga B. occidentalis and correlates the impact of their composing chemical groups with the levels of interaction with the blood co-factors.

Varicella (chickenpox) is one of the most common infectious diseases in preschool children and can be prevented by immunization. While immunization program promotes higher vaccine coverage, there are still challenges with implementing vaccination programs particularly in low-income countries. Economic barriers can increase inequality in vaccination, which highlights the importance of distributing cost-effective varicella vaccines. Varicella vaccines have been developed with two main Varicella-Zoster Virus (VZV) strains globally: MAV/06 and Oka strains. Most of the vaccines are based on the Oka strain, while MAV/06 strain vaccines were exclusively developed by GC Biopharma. Although more than 30 million doses of MAV/06 vaccines as cost-effective vaccines have been distributed internationally, there is no comprehensive review on safety, immunogenicity, and effectiveness of MAV/06 vaccines in the literature. This paper aims to summarize and present more than 30 years of accumulated evidence from research on safety, immunogenicity, and effectiveness of MAV/06 vaccines. We expect that MAV/06 vaccines as cost-effective varicella vaccines make a significant contribution to improving global public health and health equality in children.

Background: Sarcopenia is a progressive muscle disorder characterized by muscle wasting, decreased strength, and a substantially elevated risk of developing severe and potentially life-threatening health complications. For decades, muscle wasting has been recognized as a clinical symptom in various severe diseases and conditions. However, with increasing life expectancy and an aging population, sarcopenia has emerged as a prominent age-related condition in primary care, significantly contributing to disability and mortality rates. Aim and Objective: Our goal was to elucidate the clinical characteristics associated with sarcopenia prevalence in postmenopausal women with type 1 osteoporosis. Methodology: 370 postmenopausal osteoporosis patients who routinely visited the physiotherapy department at Ali Fatima Hospital were examined in this cross-sectional investigation. Mean age 64.59 ± 5.85 years, it was discovered that the patients' quality of life, postural stability, muscular strength, and balance were related to the existence of sarcopenia. Conclusion: In summary, among postmenopausal female patients with type 1 osteoporosis, the incidence of sarcopenia was relatively high (90.35%), affecting quality of life in 39.82% of patients, postural instability in 92.21% of patients, and balance in 39.92% of patients.

Background: Vaccinating children against COVID-19 is an essential public health approach for preventing infection in children and adults. This study aimed to explore parents' attitudes toward and the rate of COVID-19 vaccine hesitancy among children in Oman. Methods: This cross-sectional study used an online, self-administered questionnaire. The 9-item questionnaire was validated earlier and administered between June 2021 and May 2022. Multiple logistic regression was used to determine the factors associated with vaccine hesitancy. The parents received a pre-validated Google questionnaire. Responses from the parents of children younger than 11 years of age were accepted. Results: 384 participants completed the questionnaire, including 207 males (54%). The response rate was 86% (384/447). Of the 384 participants, 69% of the parents hesitated to vaccinate their children aged 1-11-year-old children). In parents of children aged 1–4 years, parental vaccination status was significantly associated with vaccine hesitancy (odds ratio [OR]: 0.116, 95% confidence interval [CI]: 0.044–0.306; p < 0.001). Additionally, vaccine hesitancy was significantly more common in mothers than in fathers (OR: 0.451, 95% CI: 0.240–0.848; p = 0.013). . Mothers of children were 77% more likely to be hesitant than fathers (.78, 95% confidence intervals (CI) = 0.50–0.1.23; p = 0.283). Conclusion: Many parents hesitated to vaccinate their children against COVID-19. Consequently, future awareness campaigns and strategies should target new vaccines. The results of our study show that the Arabic version of the 5-point Likert Scale for Vaccination Hesitancy is a valid and reliable tool.

Violence against women or gender-based violence (GBV) is a major public health issue facing women and girls in different settings and is reported to have worsened globally during the COVID-19 pandemic. Despite the impact of the COVID-19 pandemic on increased violence against women in general, which has been reported in many settings globally, there is a paucity of evidence of its impact on violence against highly vulnerable women living with HIV or tuberculosis (TB). Using a qualitative design, this study aimed to explore the views and experiences of women living with HIV (n=19) or TB (n=23) in Timor Leste regarding the GBV they faced during the COVID-19 pandemic. They were recruited using the snowballing sampling technique. Data were collected using one-on-one in-depth interviews and focus group discussions. The five steps of qualitative data analysis suggested in Ritchie and Spencer’s analysis framework were employed to guide the analysis of the findings. Findings indicated that women in this study experienced intensified physical, verbal, sexual and psychological violence by their partners, spouses, in-laws, and parents or other family members during the COVID-19 pandemic. Several prominent risk factors that worsened violence against women during the pandemic were (i) HIV or TB-positive status, (ii) traditional gender roles or responsibilities and expectations, (iii) economic and financial difficulties reflected in the loss of jobs and incomes due to the pandemic, and (iv) individual factors such as jealousy and increased alcohol drinking developed during the lockdowns. The findings underscore the urgent need for multifaceted interventions to address GBV, which should encompass challenging traditional gender norms, addressing economic inequalities, and targeting individual-level risk factors. The findings also indicate the need for the development of robust monitoring and evaluation systems to assess the effectiveness of policies and interventions addressing GBV where the results can inform future improvement. The findings also indicate the need to include GBV in the protocol or guidelines for HIV and TB management. Future large-scale quantitative studies to capture the magnitude and specific drivers of GBV against women living with HIV and TB during the pandemic are recommended.

As an important means of controlling the spread of cities, large-scale urban green belts have been widely used in the planning and construction of green space systems in various mega-size cities around the world. In previous studies, there has been more research on the overall isolation effect of green belts, while there has been less research on changes in their internal structure. There have been more perspectives on the land-use change (LUC) caused by urban expansion, and less systematic research on the dual driving factors of LUC. In this paper, we constructed a multi-dimensional index system to measure the "contraction-expansion" mechanism of land use in the overlapping vegetation areas of large green belts under the dual influence of urban expansion and urban greening, from the perspectives of quantity, space, and connectivity during different construction periods. Taking the boundary of two green belts in Beijing as an example, we hope to provide scientific support for the construction and ecological protection of Beijing's green belts.

This work mapped the research chronology and conceptual trends on conservation agriculture-soil health-sustainable development goals nexus by analyzing data from related literature. This is the first-time different bibliometric methods such as VOSviewer, Flourish, as well as Bibliometrix and Biblioshiny models in RStudio were simultaneously used to investigate the research impacts and/or interactions between conservation agriculture (CA), soil health and sustainable development at global scale. On 20th February 2024, a search was launched on the web of science core collection using related search terms to extract relevant data. After the screening and elimination, the search produced 835 papers which were used in the bibliometric analysis. The revealed that USA (31%), India (27%), Australia (7%), England (6%), China (6%), Canada (5%), and other countries had below 5% of the published documents. Many of the papers covered zero hunger (38%), climate action (30%), life on land (26%), while other SDGs had relatively low coverage. The study found the adoption of no till, cover cropping, and organic amendments by the authors as the common CA practices. The hybrid bibliometric approach provided a clear roadmap in understanding the global research trajectory on CA-soil health and SDGs nexus, as well as the roles of countries, authors, institutions, publishing journals. This knowledge could support in championing future debates on CA potential for effective discussion and policies, especially in the developing countries where there have been low publications.

This study describes the development of an optical-based surface plasmon resonance (SPR) aptasensor for the detection of cocaine. The aptasensor was prepared by first attaching gold nanoparticles to a clean SPR chip surface, followed by the addition of an aptamer to create a modified surface. This surface was characterized using Contact Angle and Atomic Force Microscopy, revealing surface roughness values of 0.28 nm and 28.12 nm for the blank and modified surfaces, respectively. The detection of cocaine was carried out in the concentration range of 1 ng/mL to 1000 ng/mL, with a detection time of approximately 8 minutes and a cocaine limit of detection (LOD) of 0.43 ng/mL. Repeatability studies were conducted, and the stability of the signal response was examined at a concentration of 200 ng/mL. Adsorption isotherm models, including Scatchard, Langmuir, and Freundlich, were calculated to assess the surface homogeneity of the SPR aptasensor chip, with the results indicating compatibility with the Langmuir isotherm model.

This article discusses a focused study on visualizing the flow patterns in a two-phase pulsating heat pipe (PHP) using Fe₃O₄/water as the working fluid at 3 V/V% concentration. The research also aims to meticulously examine phase change phenomena in the heating section, particularly focusing on bubble formation and expansion processes. A high-speed video camera was utilized to capture dynamic insights into the behavior of the Fe₃O₄/water mixture. Based on the findings, a straightforward model was developed to explain bubble generation and growth in the mixture, serving as a useful reference for future PHP designs and optimizations. Visual observations also noted the stable nature of the Fe₃O₄/water nanofluid over a four-day period, confirming its consistency throughout the experiments. Moreover, the impact of heat load variation on the evaporator section was assessed using controlled heat inputs ranging from 10 to 80 Watts. Observations on the arrangement of slugs and plugs at a 50% filling ratio revealed interesting self-adjusting flow patterns in response to increasing heat inputs, providing valuable insights into PHP operational dynamics. Notably, the oscillatory flow behavior of Fe₃O₄/water, the chosen working fluid, exhibited greater activity in comparison to water. This distinctive flow behavior contributed to achieving heightened thermal performance efficiency for the Fe₃O₄/water system, attributed to its faster attainment of the annular flow condition.

Ferruginol is a promising abietane-type antitumor diterpene able to induce apoptosis in SK-Mel-28 human malignant melanoma. We here aim to increase this activity by testing the effect of a small library of ferruginol analogues. After an screening of their antiproliferative activity (SRB staining) on SK-Mel-28 cells the analogue 18-aminoferruginol (GI50=10 µM) was further selected for mechanistic studies including effects on mitochondrial viability (MTT assay, IC50=10 µM p<0.0001), induction of apoptosis (DAPI staining, p<0.001), changes in cell morphology associated with the treatment (cell shrinkage and membrane blebbing), induction of caspase-3/7 activity (2.5x at 48h, 6.5x at 72h; p<0.0001), changes in the mitochondrial membrane potential (not significant), and effects on 2D cell migration and 3D cell invasion (modified Boyden assay, not significant). The results were compared to those of the parent molecule (ferruginol, GI50»50 µM) and paclitaxel (GI50=10 nM) as a reference drug. In conclusion, we demonstrate here that derivatization of ferruginol into 18-aminoferruginol increases its antiproliferative activity 5 times in SK-MEL-28 cells as well as changing the apoptotic mechanism of its parent molecule ferruginol from activation of caspases without depolarization of mitochondrial membrane.

Asthma is a prevalent disease that around 300 million worldwide, resulting in substantial morbidity, mortality, and economic burden on a global scale. New clinical and laboratory research has shed light on the immunology causing asthma. Asthma is now recognized as a heterogeneous disease. A personalized medicine is based on the classification of asthma by endotype by linking observable characteristics to immunological mechanisms. Identifying endotype mechanisms is essential for better characterizing patients and personalizing therapeutic approaches with novel biological agents that target specific immune pathways. This article provides a summary of the major immunological mechanisms involved in the pathogenesis and emergence of the disease's phenotypic features, as well as the individualized treatment for severe asthma subtypes

Topic discovery is finding the main idea of large amounts of textual data. It indicates the recurring topics in the documents, allowing an overview of the texts. Current topic discovery models receive the texts, with or without pre-processing of Natural Language Processing. The processing consists of stopwords removal, text cleaning and normalization (lowercase conversion). A topic discovery model that receives texts with or without processing generates general topics since the input data is many uncategorized texts. The general topics do not offer a detailed overview of the input texts, and manual text categorization is a time-consuming and tedious task. Accordingly, it is necessary to integrate an automatic text classification task in the topic discovery process to obtain specific topics with their top words that contain relevant relationships based on belonging to a class. Text classification performs a word analysis that makes up a document to decide what class or category is being identified; then, integrating the text classification before a topic discovery process will provide latent topics depicted by top words with a high coherence in each topic based on the previously obtained classes. Therefore, this paper exposes a approach that integrates text classification into topic discovery from large amounts of English textual data, such as 20-Newsgroup and Reuters corpora. The text classification is accomplished with a Convolutional Neural Network(CNN) incorporating three embedding models based on semantic relationships. The topic discovery over categorized texts is realized with Latent Dirichlet Analysis(LDA), Probabilistic Latent Semantic Analysis(PLSA), and Latent Semantic Analysis(LSA) algorithms. An evaluation process was performed based on the normalized topic coherence metric. The 20-Newsgroup corpus was classified, and twenty topics with ten top words were discovered for each class, obtaining 0.1723 normalized topic coherence when applying LDA, 0.1622 with LSA, and 0.1716 with PLSA. The Reuters corpus was also classified, obtaining 0.1441 normalized topic coherence when applying the LDA algorithm to obtain 20 topics for each class.

The aim of this work was to study the, so far, unexplored possibility that non-genetic inheritance of animal behavioral characteristics could depend on the state of the parents at the time of conception, by studying inheritance of high and low motor and exploratory activity in the first generation of rats. In this study, we measured the levels of motor and exploratory activity in rats at the ages of 2 and 5 months. Male and female rats were mated at the age of 5 months. The following groups were used: male and female rats with high motor activity at ages of 2 and 5 months (ACT+); male and female rats with high activity at the age of 2 months, but low activity at the age of 5 months (ACT–); male and female rats with low activity at the ages of 2 and 5 months (PAS–); male and female rats with low activity at the age of 2 months, but high activity at the age of 5 months (PAS+). Significant differences in the severity of exploratory activity were found between the offspring of ACT+ and ACT– rats. Moreover, these differences were observed only in males, and not in females. Differences between the offspring of PAS+ and PAS– rats were observed in both the male and female rats. The motor activity of animals in the period from 20 minutes after the start of registration did not differ between groups. Thus, it can be considered that individual characteristics of general motor activity are due to genetically inherited factors, while differences in the level of exploratory activity, apparently, are formed due to non-genetic influences from parents during mating.

The vibrational excitation cross section of a diatomic molecule by positron impact is obtained using wavepacket propagation techniques. The dynamics was carried on a two-dimensional potential energy surface which couples a hydrogen-like harmonic oscillator to a positron via a spherically symmetric correlation polarization potential. The cross section for the excitation of the first vibrational mode is in good agreement with previous reports. Our model suggests that a positron couples to the target vibration by responding instantly to an interaction potential which depends on the target vibrational coordinate.

Infant obesity has become one of the most serious global health challenges of our time. The combined prevalence of overweight and obesity has rapidly increased worldwide during the last two decades, especially in some developing countries where obesity is reaching levels on a par with some industrialized countries, or even higher. This fast growth has occurred especially in countries in the midst of rapid social-economic transitions. Most international comparisons focus on the adult population while analyses focusing on the child population are more limited. Using the methodology developed by Phillips and Sul [1], this paper studies the worldwide evolution of infant body mass index (BMI), overweight and obesity prevalence for a large sample of countries during the period 1975-2016. Our results indicate that the figures for BMI or the prevalence of obesity in different countries do not converge, while the opposite is the case for overweight prevalence in children. Furthermore, there is a non-linear relationship between obesity and income or human capital, indicating that low and middle-income countries require a strong initiative for health policies targeting obesity prevention.

As the novel COVID-19 disease spreads around the world, the most affected population are those who suffer from the most common chronic diseases, such as obesity, hypertension, and type 2 diabetes, which are quite associated with the so-called age-related diseases. On the other hand, since the Spanish influenza outbreak, humanity has not experienced an infectious disease that synergizes so quickly with chronic diseases, making it mortal for those individuals with comorbidities. In this context, COVID-19 is challenging for health systems all around the world due to the high prevalence of chronic diseases. Nowadays, we are facing the beginning of a new era in which health infectious and chronic diseases meet. Therefore, epidemiologic and biomedical researchers must work together to solve further contingencies, and politicians should direct science-centered decisions on public health. In the present paper, we make an urgent call to learn from the COVID-19 lessons in order to mitigate the chronic diseases prevalence and to address the influence of the infectious diseases on the aging process; since we are about to begin the Decade of Healthy Aging.

A rehabilitation technique for asphalt pavements with geosynthetic is the application of impregnated nonwoven geotextiles between deteriorated and new asphalt overlays. The performance investigation of impregnated geotextiles proves that they are enhancing in mechanical and hydraulic properties. Although, the installation process may cause severe impacts on these materials’ performance. During the installation, the geotextile suffers damage due to the traffic of high load vehicles, as compactors and pavers, and the friction with granular materials found under its layer or poured above it. This paper aims to investigate how the damage caused by granular materials on nonwoven geotextiles impregnated with different asphalt emulsions effect on their strength resistance and permittivity. From two types of nonwoven geotextiles: polypropylene and polyethylene terephthalate, the comparison uses geotextiles in three conditions: not impregnated, impregnated with asphalt emulsion of rapid setting, and impregnated with asphalt emulsion changed by an elastomeric polymer. Part of the samples followed the damage according to ISO 10722 procedure, placed between three different scenarios of granular materials, applying gravel, sand, and clay. After the damage process, the samples were submitted to mechanical and hydraulic properties evaluations.

Bangladesh has a history of species introduction from different geographic regions. The country was a major trade route during the early-modern era and was under British colonial rule until 1947s. Many species of plants and animals are either domesticated or cultivated at different times that were brought into the country by the settlers, seamen, and traders. The deliberate preferences of fast-growing, high-yielding exotics in recent decades also threaten the existence of native species and their genetic resources in the country. Here we provide an overview of the invasive alien species in Bangladesh, likely pathways of their introduction, their impacts on ecosystem and people, and strategies for their effective management and regulation. Many exotic plants and animals both terrestrial and aquatic have found to be invasive in the country with negative impacts on local ecosystems, biodiversity, and livelihoods. Collectively, those species possess serious threats to country’s agriculture, forestry, and fisheries sector. Although initially introduced to favor primary productivity or other environmental benefits, many of these are now regarded as obnoxious pest or weed in Bangladesh. A comprehensive list of invasive species both for native and exotics and a framework to characterize them is also absent in the country. We recommend a separate statutory body and appropriate rules and policies for the introduction, monitoring, and management of alien species in the country. Community awareness, advocacy, surveillance, capacity building of relevant government staff and agreement with neighboring countries for transboundary management of invasive alien species is also necessary.

High rates of phosphorus (P) currently being applied to soils for the production of vegetables in the Mekong Delta, Vietnam has led to the concern of its negative effect on the economics and the environment. This research presents a comprehensive study on the determination of P supplying capacity in this region of Vietnam to examine the possibility of reducing P fertilizer input. One hundred twenty (120) soil samples were collected to evaluate total P and Bray 1 available P in the soils. Phosphorus maximum sorption, degree of P saturation, P release, and the effect of P fertilizer on corn (Zea mays L.) yield in greenhouse and fields were also determined. Total P concentrations of 56.7% soil samples evaluated yielded high P concentrations (>560 mg P/kg), while 74.2% of the samples had high Bray 1 available P concentrations (>20 mg P/kg soil). Maximum P sorption ranged from 149 to 555 mg P/kg soil, respectively and has negative correlation to available P (r = - 0.63*), degrees of P saturation ranged from 0.63 to 5.46% correlated to available P (r = 0.98**) and maximum P release ranged from 1.2 to 61.9 mg P/kg soil, respectively correlated to available P (r = 0.96**). Corn grown in soils with available P concentrations >15 mg P/kg did not respond to P fertilizer in greenhouse or field experiments. We conclude that many farmers in this region can reduce P fertilizer input, thus increasing their profits and reducing negative environmental impacts associated with excess soil P for sustainable agriculture.

We use oblate coordinates to study its resulting orbit equations. Their related solutions of Einstein's vacuum equations can be written as a linear combination of Legendre polynomials of positive denite integers $l$. Starting from solutions of the zeroth order $l=0$ in a nearly newtonian regime, we obtain a non-trivial formula favoring both retrograde and advanced solutions for the apsidal precession depending on parameters related to the metric coecients, particularly applied to the apsidal precessions of Mercury and asteroids (Icarus and 2 Pallas). As a realization of the equivalence problem in general Relativity, a comparison is made with the resulting perihelion shift produced by Weyl cylindric coordinates and the Schwarzschild solution analyzing how different geometries of space-time influence on solutions in astrophysical phenomena.

This paper shows a method for pipeline leak detection using a transient-based method with MATLAB® functions. The simulation of a pipeline systems in the time domain are very complex. In the case of the dissipative model, transfer functions are hyperbolic Bessel functions. Simulating a pipeline system in the frequency domain using a dissipative model we could find an approximate transfer function with equal frequency domain response to in order get the pipeline system's time domain response. The method described in this paper can be used to detect, by comparison, to detect a leak in a pipeline system model.

Background: This study aimed to analyze the psychometric properties of the Brief-COPE Inventory and to determine its concurrent validity by exploring its association with perceived stress in Peruvian nurses. Methods: Psychometric study carried out in 434 Peruvian nurses to determine the psychometric properties by confirmatory factor analysis. Three stepwise variable selection regression models were implemented. Results: The three-factor of the Brief-COPE Inventory reported adequate fit (root mean square error of approximation = 0.052, standardized root mean square = 0.068, and both the comparative fit index and the Tucker–Lewis index = 0.95). Likewise, we found that its factors are correlated (p &lt; 0.001) and that there is adequate reliability (ω= 0.90). Moreover, nurses showed a medium level of perceived stress and the following associated factors: sex, having received stress management training, fear of COVID-19, and problem-focused coping strategies (p &lt; 0.05). Conclusion: This study proved that Brief-COPE Inventory is a valid tool for measuring coping strategies in Peruvian nurses because it has a good fit to the model, excellent reliability, and concurrent validity with perceived stress. However, further studies are required to evaluate its validity according to the nursing professionals’ perceived areas of performance.

Heart failure is associated with a significant mortality rate, and an elevated prevalence of this condition has been noted among hypertensive patients. The identification of predictive factors for heart failure progression in hypertensive individuals is crucial for early intervention and improved patient outcomes. In this study, we aimed to identify these predictive factors utilizing medical history data for hypertension patients. Specifically, we focused solely on utilizing medical data preceding the diagnosis of hypertension to enable patients to anticipate the onset of potential heart failure at the time of hypertension diagnosis. Age-specific and ICD system-specific predictive factors were identified utilizing the MIMIC-IV database through the application of two analytical approaches: chi-square tests and XGBoost modeling. Our findings reveal 21 overall predictive factors, encompassing conditions such as atrial fibrillation, the use of anticoagulants, kidney failure, obstructive pulmonary disease, and anemia. These factors were assessed through a comprehensive review of the existing literature. We anticipate that the results will offer valuable insights for the risk assessment of heart failure in hypertensive patients.

Soybean with insignificant differences in appearance have large differences in their internal physical and chemical components, therefore follow-up storage, transportation and processing require targeted differential treatment. A fast and effective machine learning method based on hyperspectral data of soybean for pattern recognition of categories is designed as a non-destructive testing method in this paper. A hyperspectral-image dataset with 2299 soybean seeds in 4 categories is collected; Ten features is selected by extreme gradient boosting algorithm from 203 hyperspectral bands in range 400 to 1000 nm; A Gaussian radial basis kernel function support vector machine with optimization by the Tree-structured Parzen Estimator algorithm is built as TPE-RBF-SVM model for pattern recognition of soybean categories. The metrics of TPE-RBF-SVM are significantly improved compared with other machine learning algorithms. The accuracy is 0.9165 in the independent test dataset which is 9.786% higher for vanilla RBF-SVM model and 10.02% higher than the extreme gradient boosting model.

Regenerated silk (RS) is a protein-based “biopolymer” that enables the design of new materials; here, we called “bionic” the process of regenerated silk production by a fermentation-assisted method. Based on yeast’s fermentation, here we produced a living hybrid composite made of regenerated silk nanofibrils and a single-cell fungi, the Saccharomyces cerevisiae yeast extract, by fermentation of such microorganisms at room temperature in a dissolution bath of silkworm silk fibers. The fermentation-based processing enhances the beta-sheet content of the RS, corresponding to a reduction in water permeability and CO₂ diffusion through RS/yeast thin films enabling the fabrication of a mechanically robust film that enhances food storage durability. Finally, a transfer print method, which consists of transferring RS and RS/yeast film layers onto a self-adherent paraffin substrate, was used for the realization of heat-responsive wrinkles by exploiting the high thermal expansion of the paraffin substrate that regulates the applied strain, resulting in a switchable coating morphology from the wrinkle-free state to a wrinkled state if the food temperature overcomes a designed threshold. We envision that such efficient and smart coatings can be applied for the realization of smart packaging that, through such a temperature-sensing mechanism, can be used to control food storage conditions.

As large language models (LLMs) continue to advance, evaluating their comprehensive capabilities becomes significant for their application in various fields. This research study comprehensively evaluates the language, vision, speech, and multimodal capabilities of GPT-4o. The study employs standardized exam questions, reasoning tasks, and translation assessments to assess the model's language capability. Additionally, GPT-4o's vision and speech capabilities are tested through image classification and object recognition tasks, as well as accent classification. The multimodal evaluation assesses the model's performance in integrating visual and linguistic data. Our findings reveal that GPT-4o demonstrates high accuracy and efficiency across multiple domains in language and reasoning capabilities, excelling in tasks that require few-shot learning. GPT-4o also provides notable improvements in multimodal tasks compared to its predecessors. However, the model shows variability and faces limitations in handling complex and ambiguous inputs, particularly in audio and vision capabilities. This paper highlights the need for more comprehensive benchmarks and robust evaluation frameworks, encompassing qualitative assessments involving human judgment as well as error analysis. Future work should focus on expanding datasets, investigating prompt-based assessment, and enhancing few-shot learning techniques to test the model's practical applicability and performance in real-world scenarios.

Bladder cancer (BC) possesses distinct molecular profiles that influence progression depending on its biological nature and delivered treatment intensity. Muscle-invasive BC (MIBC) and non-MIBC (NMIBC) demonstrate great intrinsic heterogeneity regarding different prognoses, survival, progression, and treatment outcomes. Transurethral resection of bladder tumor (TURBT) is the standard of care in treating NMIBC and serves both diagnostic and therapeutic purposes, despite the prevalent recurrence and progression among many patients. In particular, flat urothelial car-cinoma in situ and urothelial carcinoma with lamina propria invasion are the major precursors of MIBC. A new‐generation photosensitizer, 5‐Aminolevulinic acid (5-ALA), demonstrates high tumor specificity by illuminating the tumor lesion with a specific wavelength of light to produce fluorescence, and has been studied for photodynamic diagnosis to detect precise tumor areas by TURBT. Additionally, it has been applied for treatment by producing its cytotoxic reactive oxygen species, as well as screening for urological carcinomas by excreting porphyrin in the blood and urine. Moreover, 5-ALA may contribute to screening before and after TURBT in NMIBC. Here, we summarize the updated evidence and ongoing research on photodynamic technology for NMIBC, providing insight into the potential for improving patient outcomes.

Paper presents proposition of possible extension of The Standard Model Classification of Particles and Fields in way to include gravitation into it.

Beef dry aging consist in a selection of unpackaged primal cuts that are placed in a refrigerator room with controlled environment for several weeks. The goals are the concentration of flavor, like nutty and beefy and tenderness improvement. In this study it was intended verify the microbiological and physicochemical behavior and the meat sensorial perception during a process example of meat dry aging. Twelve beef loins were selected for 90 days of dry aging and placed in a refrigerator room with average temperature, relative humidity and forced air 3.17 ± 0.68 °C, 60.65 ± 4.23 % and 0.5-2 m/s, respectively. On 1, 14, 21, 35, 60 and 90 days of dry aging, were taken two samples, crust and lean meat for microbiological counts, pH, aw, color L*a*b* and sensorial analysis. During drying, there weren´t any pathogenic bacteria counts and the average counts were higher for the crust. The aw and pH had an average of 0.98 ± 0.02 and 5.77± 0.015, with a slightly decrease and increase respectively (P&lt;0.05) along aging days. The dry aging process practices, with room refrigeration at RH&lt;65.00% and temperature &lt;4.00 °C can be the reason for aw&lt;0.98 and meat pH&lt;6.00 and therefore for the absence of pathogenic bacteria. The lower microbial counts on the lean meat and the overall acceptability assessed by the sensory panel confirm the importance of the good trimming and storage practices for the dry aged beef.

The ankle is a complex joint with a high injury incidence. Rehabilitation Robotics applied to the ankle is a very active research field. We present cable-driven reconfigurable robot kinematics and statics. We studied how the tendons pull mid-foot bones around the talocrural and subtalar axes. Likewise, we propose a hybrid serial-parallel mechanism analogous to the ankle. Then, using screw theory, we synthesized a cable-driven robot with the human ankle in the closed-loop kinematics. We incorporate a draw-wire sensor to measure the axes’ pose and compute the product of exponentials. We reconfigure the cables to balance the tension and pressure forces using the axis projection on the base and platform planes. Likewise, we also computed the workspace to show that the reconfigurable design fits several sizes. The data used is from anthropometry and statistics. Finally, we validated the robot’s statics with MuJoCo for various cable length groups corresponding to the axes’ range of motion. We suggested a platform adjusting system and an alignment method. The design is lightweight, and the cable-driven robot has advantages over rigid parallel robots, such as Stewart platforms. We will use compliant actuators.

Artificially designed, chimeric peptide-based recombinant vaccines are novel approaches to combat the phylogenetically diverse Foot and Mouth Disease (FMD) Virus (FMDV) strains. Among seven distinct serotypes, only serotype O and A are dominantly circulating in Bangladesh and neighbouring countries of Asia, where transboundary transmission, recurrent outbreaks and emergence of novel lineages FMDV are highly prevalent. The objective of this study was to develop multi-epitope recombinant peptides, procuring immunogenicity against circulating diverse subtypes of FMDV serotype O and A. Two chimeric peptides, named B1 (41.0 kDa) and B3 (39.3 kDa), have been designed to incorporate potential B-cell and T-cell epitopes selected from multiple FMDV strains, including previously reported and newly emerged sub-lineages. After expression, characterization and immunization of guineapigs with considerable antigen load of B1 and B3 followed by the serological assays revealed the significant protective immunogenicity, developed from the higher (100 µg) doses of both antigens, against most of the currently prevalent serotype O and A strains of FMDV. The efficient expression, antigenic stability, and multivalent immunogenic potency of the chimeric peptides strongly indicate their credibility as novel vaccine candidates for FMDV serotypes O and A circulating in Bangladesh and surrounding territories.

Automated weeding is an important research area in agrorobotics. Weeds can be removed mechanically or with the precise usage of herbicides. Deep Learning techniques achieved state of the art results in many computer vision tasks, however their deployment on low-cost mobile computers is still challenging. These paper present an advanced version of the system presented in [1]. The described system contains several novelties, compared both with its previous version and related work. It is a part of a project of the automatic weeding machine, developed by Warsaw University of Technology and MCMS Warka Ltd. The obtained model reaches satisfying accuracy at over 10~FPS on the Raspberry Pi 3B+ computer. It was tested for four different plant species at different growth stadiums and lighting conditions. The system performing semantic segmentation is based on Convolutional Neural Networks. Its custom architecture mixes U-Net, MobileNets, DenseNet and ResNet concepts. Amount of needed manual ground truth labels was significantly decreased by the usage of knowledge distillation process, learning final model to mimic an ensemble of complex models on the large database of unlabeled data. Further decrease of the inference time was obtained by two custom modifications: in the usage of separable convolutions in DenseNet block and in the number of channels in each layer. In the authors’ opinion, described novelties can be easily transferred to other agrorobotics tasks.

Ti and Ti alloys are materials usually used in contact with hard tissue for applications such as artificial joints and dental implants. Ti6Al4V is a very common alloy used for dental implants, owing to its good mechanical properties and corrosion resistance. Nevertheless, because of uncertainties regarding the toxicity of vanadium and its influence on the human body, other Ti alloys containing no vanadium and retaining suitable properties are used. In this work Ti6Al4V and Ti6Al7Nb were oxidized in a water solution of calcium acetate (Ca(CH3COO)2) and calcium glycerophosphate (Ca(PO4CH(CH2OH)2) by Plasma Electrolytic Oxidation (PEO) for 20 minutes and then were hydrothermally treated (HTT) in water (pH=7) and in potassium hydroxide (KOH) solution (pH=11) for 2 hours at 200°C in a pressurized reactor. The surface morphologies, elemental composition and phase components were characterized by Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS) and X-Ray Diffraction (XRD), respectively. The surface roughness was measured by Atomic Force Microscope (AFM) and thickness measurements were made by SEM and thickness gauge. Also, corrosion tests were made to evaluate the corrosion behavior of the two alloys. The aim of this study is to compare two viable Ti alloys, Ti6Al4V and Ti6Al7Nb, and to attain on their surface hydroxyapatite (HA) coating improving the osseointegration, as it simulates a human bone.

The main goal of this study was to pinpoint functional candidate genes associated with multiple economically important traits in Nellore cattle. After quality control, 1 830 genomic regions sourced from 52 scientific peer-reviewed publications were used in this study. From these, a total of 8 569 positional candidate genes were annotated for reproduction, 11 195 for carcass, 5 239 for growth, and 3 483 for morphological traits, and used in the overrepresentation analysis. The significant genes (adjusted p-values&lt;0.05) identified in the overrepresentation analysis underwent prioritization analyses, and an enrichment analysis of the prioritized overrepresented candidate genes was performed. The prioritized candidate genes were: GFRA4, RFWD3, SERTAD2, KIZ, REM2, and ANKRD34B for reproduction, RFWD3, TMEM120A, MIEF2, FOXRED2, DUSP29, CARHSP1, OBI1, JOSD1, NOP58, and LOXL1-AS1 for carcass, ANKRD34B, and JOSD1 for growth traits, and no gene prioritized for morphological traits. The functional analysis pinpointed the following genes: KIZ (plays crucial role in spindle organization, essential in forming a robust mitotic centrosome), DUSP29 (involved in muscle cell differentiation), and JOSD1 (involved in protein deubiquitination, thereby improving growth). The enrichment of the functional candidate genes identified in this study highlights that these genes play an important role in the expression of reproduction, carcass, and growth traits in Nellore cattle.

Abstract: Objective: Internet gaming disorder (IGD) is an emerging psychiatric disorder that has received attention over the past decade. Few studies have attempted to describe this disorder in the Saudi population. This study aimed to examine the prevalence of IGD and associated factors. A cross-sectional study was conducted using translated Arabic and a validated questionnaire targeting both genders in Saudi Arabia. Methodology: A cross-sectional study using a validated questionnaire (IGD-20) and targeting Arabic-speaking children, youth, and transitional age including both genders. A snowball approach was used to sample our population using an electronic survey. Logistic regression was used to examine factors associated with IGD diagnosis. The study was guided by the STROBE statement. Results: Among 419 individuals who participated in the study, 171 were classified as non-IGD, 167 were at risk for IGD (RIGD), and 72 were IGD. There is no significant association between IGD diagnosis and gender, nationality, residence, and family income. Time playing per week was significantly associated with IGD diagnosis (X2=49.256, p<0.01). There is a significant association between IGD-20 groups and categorical age groups (X2=10.096, p<0.01). Among our sample, the percentages of males (54.2%) and females (45.8%) who met the criteria for IGD were comparable. Conclusion: IGD and RIGD prevalence was significantly high in both age groups. Both males and females were affected similarly.

Iron is the most abundant micronutrient in plant mitochondria and it has a crucial role in biochemical reactions involving electron transfer. It has been described in Oryza sativa that Mitochondrial Iron Transporter (MIT) is an essential gene and that knockdown mutant rice plants have a decreased amount of iron in mitochondria, strongly suggesting that OsMIT is involved in mitochondrial iron uptake. In Arabidopsis thaliana, two genes encode MIT homologues. In this study, we analyzed different AtMIT1 and AtMIT2 mutant alleles, confirming that individually AtMIT1 nor AtMIT2 genes are essential. When we generated crosses between Atmit1 and Atmit2 alleles we were able to isolate homozygous double mutant plants. Interestingly, homozygous double mutant plants were obtained only when mutant alleles of Atmit2 with the T-DNA insertion in the intron region were used for crossings, and in these cases a correctly spliced AtMIT2 mRNA was generated, although at a low level. Atmit1 Atmit2 double homozygous mutant plants, which were knockout for AtMIT1 and knockdown for AtMIT2, were grown and chacterised in iron sufficient conditions. Pleiotropic developmental defects were observed including abnormal seeds, increased number of cotyledons, slow growth rate, pinoid stems, defects in flower structures and reduced seed set. We observed a possible phenomenon of T-DNA suppression in the next generation of Atmit1 Atmit2 double homozygous mutant plants, correlating with an increased splicing of the AtMIT2 intron containing the T-DNA. Molecular analysis of gene expression markers for mitochondrial and oxidative stress showed that Atmit1 Atmit2 double homozygous mutant plants express a degree of mitochondrial perturbation. A RNA-Seq study was performed and we could identify more than 760 genes differentially expressed in Atmit1 Atmit2, including genes involved in iron transport, coumarin metabolism, and hormones metabolism, transport and signaling. Our data suggest that some of the phenotypes observed in Atmit1 Atmit2 double homozygous mutant plants are mediated by defects in auxin homeostasis.

The urgent need for effective, safe and equitably accessible vaccines to tackle the ongoing spread of COVID-19 led researchers to generate vaccine candidates targeting varieties of immunogens of SARS-CoV-2. Because of its crucial role in mediating binding and entry to host cell and its proven safety profile, the subunit 1 (S1) of the spike protein represents an attractive immunogen for vaccine development. Here, we developed and assessed the immunogenicity of a DNA vaccine encoding the SARS-CoV-2 S1. Following in vitro confirmation and characterization, the humoral and cellular immune responses of our vaccine candidate (pVAX-S1) was evaluated in BALB/c mice using two different doses, 25 µg and 50 µg. Our data showed high levels of SARS-CoV-2 specific IgG and neutralizing antibodies in mice immunized with three doses of pVAX-S1. Analysis of the induced IgG subclasses showed a Th1-polarized immune response as demonstrated by the significant elevation of spike-specific IgG2a and IgG2b compared to IgG1. Furthermore, we found that immunization of mice with three doses of 50 µg of pVAX-S1 could elicit significant memory CD4+ and CD8+ T cell responses. Taken together, our data indicates that pVAX-S1 is immunogenic and safe in mice and is worthy of further preclinical and clinical evaluation.

This case report describes the successful repair of a radial bone fracture and skin defect in a dog using an ulnar bone graft and an advancement flap. A one-year-old spayed female Poodle dog weighing 1.7 kg was brought in with non-weight-bearing lameness, an open wound, and a frac-ture in the right forelimb. The dog had fallen off the bicycle being ridden by its owner, causing its right forelimb to be caught in the wheel. The treatment included surgical debridement of the necrotic tissue, skin reconstruction with an advancement flap, and radial bone reconstruction with an ulnar bone graft, bone morphogenetic protein (BMP), humeral cancellous bone and a ti-tanium T-shaped plate. Postoperative management included antibiotics, pain medication, and activity restriction. The dog made a good recovery and was able to bear weight on the affected limb four months after surgery.

Background: Access to rehabilitation is crucial for the realization of the right to health and a proper concern of global health. Yet, reliable information to guide rehabilitation service planning is unavailable in many countries in part due to the lack of appropriate indicators. To ensure universal health coverage and meet the central imperative of “leaving no one behind” countries must be able to assess key aspects of rehabilitation policy and provision and monitor how they have discharged their human rights responsibilities towards those most disadvantaged, including people with disability. This article describes the process of developing an expert guided indicator framework to assess governments’ efforts and progress in strengthening rehabilitation in line with the Convention on the Rights of Persons with Disabilities. Methods: A systems methodology - concept mapping - was used to capture, aggregate and confirm the knowledge of diverse stakeholders on measures thought to be useful for monitoring the implementation of the Convention with respect to health related rehabilitation. 56 individuals generated a list of 107 indicators through online brainstorming which were subsequently sorted by 37 experts from the original panel into non overlapping categories. 41 participants rated the indicators for importance and feasibility. Multivariate statistical techniques where used to explore patterns and themes in the data and create the indicators’ organizing framework which was verified and interpreted by participants. Results: A concept map of 11 clusters of indicators emerged from the analysis grouped into three broader themes: Governance and Leadership (3 clusters); Service Delivery, Financing and Oversight (6 clusters); and Human Resources (2 clusters). The RESYST was comprehensive and well aligned with the Convention. On average, there was a moderately positive correlation between importance and feasibility of the indicators (r=.58) with experts prioritizing the indicators contained in the clusters of the Governance and Leadership domain. Two of the most important indicators arose from the Service Delivery, Financing and Oversight domain and reflect the need to monitor unmet needs and barriers in access to rehabilitation. In total, 59 indicators achieved above average score for importance and comprised the two–tiered priority set of indicators. Conclusion: Concept mapping was successful in generating a shared model that enables a system’s view of the most critical legal, policy and programmatic factors that must be addressed when assessing country efforts to reform, upscale and improve rehabilitation services. The RESYST provides a data driven basis for the development of standardized data collection tools to facilitate comparative analysis of rehabilitation systems.

The purpose of this study was to identify candidate novel species performing beneficial ecological functions from soil. The hypothesis was that novel culturable species with antibiotic production potential could be readily found from soil in the Nature Canyon at Los Angeles Pierce College. 137 bacterial isolates from soil were grown on nutrient agar, ISP-6 medium, or LB agar and partial 16S was ascertained using the Sanger platform for regions V1-V4. One of the potentially novel isolates, Pseudomonas sp. 21-C3-ER, was isolated on nutrient agar from fallow soil in an agricultural nature preserve in Los Angeles. The soil conditions were 3.7% moisture, clay texture by touch, 13.37% organic matter, pH=6.63, TDS=638, 150 ppm nitrogen, 114 ppm phosphate, and 42 ppm potash. Whole genome sequencing was performed on the DNBseq platform and species identification was performed with TRUEBacID; the closest relative was Pseudomonas brassicacearum subsp. neoaurantiaca which was 92.05% similar by genomic evidence. 197 virulence factors were identified including flagellar biosynthesis, motor proteins, Beta-lactamase, Fosfomycin, copper, and sulfur drug resistance. Gram stain of strain 21-C3-ER revealed gram negative rods. Rods were visualized with scanning electron microscopy, revealing individuals approximately 1 µm in length. Secondary metabolite analysis using antiSMASH showed a variety of post-translationally modified proteins and a promysalin analog. The qualitative test for pyoverdine siderophore production using UV light was positive. Metabolic analysis using RAST indicated genes were present for pyoverdine production, antimicrobial resistance, and ammonification. The nitrate reduction test was positive. Denitrifying bacteria may prevent leaching of nitrates from soil, since ammonia has a higher affinity to soil and organic matter than nitrate. We propose Pseudomonas fernandeno as a novel species. The type stain is 21-C3-ER.

The present research project entitled "Development of a method for predicting the optimal maturity level of avocado using machine learning" aims to establish an accurate and efficient approach to assess the maturity of avocados using machine learning methodologies. This research specifically focuses on identifying the relevant physical and chemical characteristics of avocados, creating a dataset containing categorized images of maturity levels, and creating machine learning models capable of accurately predicting fruit maturity. The studies reveal that the application of machine learning, in particular convolutional neural networks and multisensor models, has the potential to transform the prediction of avocado maturity and thus improve product quality and customer satisfaction. The findings indicate that the proposed techniques achieve an accuracy rate of over 90%, demonstrating their viability for integration into mobile applications that can benefit growers and suppliers in their decision-making processes.

This study aims to evaluate the financial performance of SOEs in Indonesia and compare it with private companies using financial ratio analysis and efficiency analysis approaches. Four construction sector SOEs were evaluated, and five private companies were compared using financial data from 2015 to 2022. The financial ratio analysis used the Peterson (2013) approach, while the efficiency analysis employed the data envelopment analysis (DEA) approach and the paired t-test. The study results show that the financial ratio performance of state-owned companies is relatively poor, with low profitability, critical liquidity, and a high debt ratio. Debt, as a source of capital in financing construction projects, makes companies face a greater debt risk. This study validates that SOEs have lower efficiency compared to private companies.

Here, we consider a closed composite system consisting of a primary system where the chemical reaction occurs and is located in a p, T reservoir. In the ideal isentropic case (thermodynamic process), the change in the internal energy of the composite system (due to a chemical reaction) is wholly converted into useful work - maximum useful work. Irreversibility - a measure for the degradation of useful work - in a closed system generates entropy, i.e., the thermodynamic process is no longer isentropic. Applying the principle of maximum entropy and minimum internal energy to a part of the system's total volume and applying the elements of the system's volume for which the law of local equilibrium applies useful work and irreversibility can be defined. Suppose the primary system is viewed as a set of black box volume elements in which a chemical reaction occurs. In that case, the criterion of an isentropic process or a process with entropy generation becomes the Gibbs-Duham equation. It has been proven that De Donder's equation of entropy production of a chemical reaction is a particular form of Calen's equation –TdST = dUT where dST is the differential change of total entropy and dUT is the differential change of total internal energy of the composite system.

The aim of this document is to provide practical guidance on the choice of target difference used in the sample size calculation of a randomised controlled trial (RCT). Guidance is provided with a definitive trial, one that seeks to provide a useful answer, in mind and not those of a more exploratory nature. The term “target difference” is taken throughout to refer to the difference that is used in the sample size calculation (the one that the study formally “targets”). Please see the glossary for definitions and clarification with regards other relevant concepts. In order to address the specification of the target difference, it is appropriate, and to some degree necessary, to touch on related statistical aspects of conducting a sample size calculation. Generally the discussion of other aspects and more technical details is kept to a minimum, with more technical aspects covered in the appendices and referencing of relevant sources provided for further reading.The main body of this guidance assumes a standard RCT design is used; formally, this can be described as a two-arm parallel-group superiority trial. Most RCTs test for superiority of the interventions, that is, whether or not one of the interventions is superior to the other (See Box 1 for a formal definition of superiority, and of the two most common alternative approaches). Some common alternative trial designs are considered in Appendix 3. Additionally, it is assumed in the main body of the text that the conventional (Neyman-Pearson) approach to the sample size calculation of an RCT is being used. Other approaches (Bayesian, precision and value of information) are briefly considered in Appendix 2 with reference to the specification of the target difference.

The effects of soluble silicon fertilization on monocots and dicots have been widely studied. However, little is known regarding its effects on protecting epiphytes against insect and fungal pests. The efficacy of silicon fertilizer to reduce damage by thrip pest complexes, namely: Thrips palmi Karny, Frankliniella occidentalis Pergande, Chaetanaphothrips orchidii Moulton, and Chaetanaphothrips signipennis Bagnall (Thysanoptera: Thripidae), and fungal pathogens: Botrytis cinerea Persoon (Helotiales: Sclerotiniaceae) and Fusarium spp. Link (Hypocreales: Nectriaceae) was examined during a nine-month greenhouse trial in Hawaii. The trial assessed yield, quality, and pest damage across three common varieties of dendrobiums. All replicates received additional soluble silicon fertilizer applications alternating weekly between soil drench and foliar (50 mg Si/plant) applications. Yield, quality, and spray length, pest damage, plant vigor, SPAD, and leaf temperature were measured. Data were analyzed using a generalized linear model (glm) with repeated measures followed by post-hoc pair-wise comparisons in R, version 4.3.1. Treatment effects were significant at P

Miniaturization of electronics devices is often limited by the concomitant high heat fluxes (cooling load) and maldistribution of temperature profiles (hot spots). Thermal energy storage (TES) platforms providing supplemental cooling can be a cost-effective solution, that often leverages phase change materials (PCM). Although salt hydrates provide higher storage capacities and power ratings (as compared to that of the organic PCMs), they suffer from reliability issues (e.g., supercooling). ‘Cold Finger Technique (CFT)’ can obviate supercooling by maintaining a small mass fraction of the PCM in solid state for enabling spontaneous nucleation. Optimization of CFT necessitates real-time forecasting of the transient values of the melt-fraction. In this study artificial neural network (ANN) is explored for real-time prediction of the time remaining to reach a target value of melt-fraction based on the prior history of the spatial distribution of the surface temperature transients. Two different approaches were explored for training the ANN model, using: (1) transient PCM-temperature data; or (2) transient surface-temperature data. When deployed in a heat sink that leverages PCM based passive thermal management systems for cooling of electronic chips and packages, this maverick approach (using the second method) affords cheaper costs, better sustainability, higher reliability and resilience.

This paper focuses on CEOs, who are considered the strategic leaders of corporations because of their crucial role in making important decisions. This research paper examines how female CEOs influence green innovation (GI) in Asian industrial sector. Its main objective is to answer the following research questions: Are there differences in GI endeavors between Asian industrial firms with female CEOs and those with male CEOs? Does the size of the industrial firms have a positive moderating effect on the relationship between CEO gender and GI? Based on our research questions, the size of firms is likely a determining factor in the GI of female CEOs. This research employs rigorous econometric modeling to analyze a substantial dataset of Asian industrial listed companies spanning from 2013 to 2022. It has been proven that industrial firms led by females CEOs are more inclined to have environmentally friendly practices. Furthermore, the size of the industrial firms amplifies the beneficial influence of female CEOs on the firm's chances of engaging in GI initiatives. Our outcomes stay robust to endogeneity issues using two-step GMM estimators. This study proposes that stakeholders, particularly in Asian countries, should promote the increased representation of females in CEO roles, particularly within large corporations. This is because women-led companies demonstrate superior performance in GI endeavors. Thus, regulators need to implement policies that promote the inclusion of women in CEO positions within large-scale enterprises. These policies may potentially strengthen the private sector’s capacity to foster sustainable innovation.

The establishment of a well characterized non-human primate model of Zika virus (ZIKV) infection is critical for the development of medical interventions. In this study, challenging Indian rhesus macaques (IRMs) with ZIKV strains of the Asian lineage resulted in dose dependent peak viral loads between days 2 and 5 post infection; and a robust immune response which protected the animals from homologous and heterologous re-challenge. In contrast, viremia in IRMs challenged with an African lineage strain was below the assays lower limit of quantitation and the immune response was insufficient to protect from re-challenge. These results corroborate previous observations but are contrary to reports using other African strains obviating the need for additional studies to elucidate the variables contributing to the disparities. Nonetheless, the utility of an Asian lineage ZIKV IRM model for countermeasures development was verified by vaccinating animals with a formalin inactivated reference vaccine and demonstrating sterilizing immunity against a subsequent subcutaneous challenge.

Soil stabilization using Portland cement is a widely adopted technique. Previous research has demonstrated that molasses, which contains sugars, enhances the reaction between cement and aggregates. This study investigates the impact of adding molasses to soil stabilized with Ordinary Portland Cement (OPC) on geotechnical properties. Expansive clay soil samples from Taru Jabba, District Nowshera, Pakistan, were treated with various combinations of molasses and cement. The concentrations of each stabilizer were varied at 0%, 4%, 8%, and 12% by dry weight of the soil. Additionally, the soil was treated with constant molasses contents of 4%, 8%, and 12%, while varying the cement content at 4%, 8%, and 12% by dry weight. Geotechnical tests, including Proctor compaction, Atterberg limits, Unconfined Compressive Strength (UCS), California Bearing Ratio (CBR), and swelling potential, were conducted to assess the effects of the stabilizers. The results indicated that the addition of molasses improved soil strength, mitigated shrinkage cracks, and reduced brittleness. Specifically, the CBR value increased from 3.2% in the native soil to 12.3% with 12% molasses and 12% cement. The Plasticity Index (PI) decreased from 14.23% to 8.12%, and the CBR swell value reduced from 9.66% to 3.82%. Furthermore, the UCS of the stabilized soil increased by 64.7% compared to the untreated soil after a 7-day curing period.

In the dynamic realm of HPC (High-performance computing) and cloud-native applications, ensuring optimal network performance for Kubernetes Container Network Interfaces (CNIs) is critical. Traditional manual methods for evaluating network bandwidth and latency are prone to errors, time-consuming, and lack consistency. This paper introduces a novel approach that leverages Ansible to automate and coordinate network performance tests across diverse CNIs, performance profiles, and configurations. By automating these processes, we eliminate the potential for human errors, ensure the ability to replicate the process, and significantly reduce the time required for comprehensive testing. The use of Ansible playbooks facilitates the efficient and scalable deployment, configuration, and execution of performance tests, enabling comprehensive and standardized benchmarking across various environments. The set of Ansible playbooks, which we will make available online, has a significant real-world impact by providing DevOps teams with robust and reliable tools for consistently monitoring and enhancing network performance. This, in turn, enhances the stability and efficiency of cloud-native applications, accelerates the development cycle, and ensures that Kubernetes-based infrastructures can meet the demanding performance requirements of modern applications.

Accurate segmentation of skin lesions from dermoscopic images is crucial for early skin cancer detection, yet variations in lesion appearance and image artifacts present challenges. This study proposes two deep learning models, UCM-NetV2 and BNN-UCM-NetV2, to improve accuracy and computational efficiency. UCM-NetV2 enhances the UCM-Net architecture with a novel "cyber-structure" combining Multilayer Perceptron and CNN layers, improving prediction accu-racy without increasing the model's parameter count. BNN-UCM-NetV2 further optimizes for mobile deployment by binarizing activations and weights into 1-bit values, reducing computa-tional complexity and model size. Evaluations on the ISIC2017 and ISIC2018 datasets demonstrate that UCM-NetV2 outperforms existing methods in both accuracy and computational efficiency, achieving this with less than 0.04 GFLOPs. These models have the potential to make skin lesion analysis accessible to a broader population, particularly in resource-limited settings, allowing for proactive skin health monitoring and facilitating teledermatology. To foster further innovation in mobile health diagnostics, the source code for UCM-NetV2 will be available on GitHub: https://github.com/chunyuyuan/UCMV2-Net.

Views of aging include peoples’ assessment of their own aging process and their subjective age. Positive aging views relate to good psychological well-being which predicts better physical and mental health. While these were substantially studied, the moderating roles of self-aging attitudes and psychological well-being in the subjective age-age discrimination connection have been much less explored. The current study used a convenience sample of 568 participants (mean = 66.21y, SD = 11.95, age range 50-95), 55.8% women, 67.1% employed. In line with the hypotheses, young subjective age and psychological well-being were connected to less age discrimination in the workplace and higher psychological well-being mitigated the subjective age-age discrimination at work connection. When the perception of old age as a period of loss was added to the model, adults who perceived old age as a period of loss and reported lower levels of psychological well-being, demonstrated the strongest relationship between an increase in subjective age and an increase in age-related discrimination at work. The findings emphasize the importance of the psychological well-being of older employees as a resource for improving their attitudes to their last years at work.

This review investigates links between post-acute sequelae of SARS-CoV-2 infection (PASC), post-infection viral persistence, mitochondrial involvement and aberrant innate immune response and cellular metabolism during SARS-CoV-2 infection. Advancement of proteomic and metabolomic studies now allows deeper investigation of alterations to cellular metabolism, autophagic processes and mitochondrial dysfunction caused by SARS-CoV-2 infection while computational biology and machine learning have advanced methodologies of predicting virus-host gene and protein interactions. Particular focus is given to interaction between viral genes and proteins with mitochondrial function and that of the innate immune system. Finally, the authors hypothesise that viral persistence may be a function of mitochondrial involvement in sequestration of viral genetic material. While further work is necessary to understand the mechanisms definitively, a number of studies now point to resolution of questions regarding the pathogenesis of PASC.

Advancements in biological and medical science are intricately linked to the biological central dogma. In recent years, gene editing techniques, especially CRISPR/Cas systems, have emerged as powerful tools for modifying genetic information, supplementing the central dogma and holding significant promise for disease diagnosis and treatment. Extensive research has been conducted on the continuously evolving CRISPR/Cas systems, particularly in relation to challenging diseases, such as cancer and HIV infection. Consequently, the integration of CRISPR/Cas-based techniques with contemporary medical approaches and therapies is anticipated to greatly enhance healthcare outcomes for human. This review begins with a brief overview of the discovery of the CRISPR/Cas system. Subsequently, using CRISPR/Cas9 as an example, a clear description of the classical molecular mechanism underlying the CRISPR/Cas system was given. Additionally, the development of the CRISPR/Cas system and its applications in gene therapy and high-sensitivity disease diagnosis were discussed. Furthermore, we address the prospects for clinical applications of CRISPR/Cas-based gene therapy, highlighting the ethical consideration associated with altering genetic information. This brief review aims to enhance understanding of the CRISPR/Cas macromolecular system and provide insight into the potential of genetic macromolecular drugs for therapeutic purposes.

Chrysanthemum tea, a typical health tea with the same origin as medicine and food, is famous for its unique health benefits and flavor. To clarify the influence of metabolites of different varieties of chrysanthemum tea on the formation of taste and quality differences, nontargeted metabolomics combined with electronic tongue analysis were used to characterize the correlation between metabolites profiles and taste characteristics of different quality chrysanthemum tea. Thirteen metabolites were identified as the key metabolites of the sensory quality difference between Huangju and Jinsi Huangju tea. Kaempferol, luteolin, genistein, and some quinic acid derivatives were correlated with the ‘astringent’ and taste attributes. In contrast, l-(-)-3 phenyllactic acid and L-malic acid were found to be the ‘bitterness’ and ‘umami’ in chrysanthemum tea. KEGG pathway enrichment analysis showed that the flavonoid and flavonol biosynthesis pathway had important effects on the sensory quality of chrysanthemum tea.

Dengue is a pan-tropical arthropod-borne disease, endemic in over 100 countries. The dengue virus comprises four antigenic serotypes (DENV 1-4). The envelope (E) and non-structural 1 (NS1) proteins are highly immunogenic, and the E protein carries epitopes eliciting neutralizing antibodies. In previous studies, mice immunizations with two DNA vaccines encoding the E ectodomain (pE1D2) and NS1 proteins (pcTPANS1) from DENV2 induced high protection. Based on these findings, we constructed new plasmids containing the codon-optimized genes from these proteins for expression in mouse and human cells, named pEotmD2 and pNS1otmD2. Compared to the pE1D2, the pEotmD2 mediated lower expression of the recombinant protein in human and mouse cell lines, while the pNS1otmD2 plasmid was slightly more efficient than the pcTPANS1 in these cells. Immunogenicity and protection were evaluated in BALB/c mice immunized with the original and codon-optimized plasmids followed by challenged with DENV2. In accordance with the in vitro experiments, the antibody response and protection elicited by the pE1otmD2 plasmid was lower than those observed with the pE1D2. In contrast, the pNS1otmD2 vaccine enabled slightly higher levels of the humoral and protective responses than the pcTPANS1. Overall, our study revealed different effects of codon optimization on these two dengue DNA vaccines.

A bridged 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) derivative (PN-DOPO) in combination with aluminum phosphates coated sepiolite (Sep@AlPO4) was used to improve the flame retardancy, thermal stability and mechanical properties of poly (ethylene oxide) (PEO)/poly (butylene adipate-co-terephthalate) (PBAT) blends. The synergistic effects of PN-DOPO and Sep@AlPO4 on the fire resistance, thermal decomposition behavior and mechanical properties of PEO/PBAT composites were investigated systematically. The results indicated that 5 wt % Sep@AlPO4 combined with 10 wt% PN-DOPO into PEO/PBAT achieved a V-1 rating in UL-94 test and the LOI value increased to 23.7%, meanwhile, the peak-heat release rate (p-HRR), av-HRR and total heat release (THR) values of PEO/PBAT/PN10%/Sep5% composites decreased by 35.6%, 11.0% and 23.0% compared with those of PEO/PBAT, respectively. The thermogravimetric analysis (TGA) results confirmed that PN-DOPO/Sep@AlPO4 could enhance the initial thermal stability and char yield of PEO/PBAT matrix, and TGA/Fourier transform infrared spectrometry (TGA-FTIR) results revealed that the composites exhibited the absorption peaks of phosphorous-containing groups and an increase in gas-phase volatiles during the thermal decomposition process. The digital photographs and morphological structures of char residues demonstrated that PN-DOPO and Sep@AlPO4 mixtures benefited to the formation of a more continuous and dense carbon layer on the composites surface during combustion. Rheological behavior revealed that a higher storage modulus, loss modulus and complex viscosity of PEO/PBAT/PN-DOPO/Sep@AlPO4 composites could also promote the cross-linking structure during burning. Furthermore, the PEO/PBAT/PN-DOPO/Sep@AlPO4 composites exhibited excellent mechanical properties in terms of elongation at break and flexural performance than the PEO/PBAT system. All the results demonstrated that PEO/PBAT system modified by the combination of PN-DOPO and Sep@AlPO4 not only exhibited excellent synergistic effect on the flame retardance, but also had good improvement on thermal stability and mechanical properties, indicating the potential application in areas requiring fire safety.

Predicting Length of Stay (LoS) and understanding its underlying factors is essential to minimize the risk of hospital-acquired conditions, improve financial, operational, and clinical outcomes, and to better manage future pandemics. The purpose of this study is to forecast patients’ LoS using a deep learning model and analyze cohorts of risk factors minimizing or maximizing LoS. We employed various pre-processing techniques, SMOTE-N to balance data, and Tab-Transformer model to forecast LoS. Finally, Apriori algorithm was applied to analyze cohorts of risk factors influencing LoS at hospital. The Tab-Transformer outperformed the base Machine Learning models with an F1-score (.92), precision (.83), recall (.93), and accuracy (.73) for discharge dataset, and F1-score (.84), precision (.75), recall (.98), and accuracy (.77) for deceased dataset. The association mining algorithm was able to identify significant risk factors/indicators belonging to lab, X-Ray, and clinical data such as elevated LDH, and D-Dimer, lymphocytes count, and comorbidities such as hypertension and diabetes responsible for extending patients LoS. It also reveals what treatments has reduced the symptoms of COVID-19 patients leading to reduction in LoS particularly when no vaccines or medication such as Paxlovid were available.

Salmonella is a foodborne pathogen associated with localized outbreaks that potentially pose a huge risk to the public health in some countries such as Africa and India, especially in the regions lacking health care measures. The focus of the present study is the molecular detection method of salmonella. The study was conducted to identify Salmonella strains by PCR targeting flagellin specific gene from suspected patient’s clinical blood samples. Serologically, Widal test results showed that all serum samples except one patient (ID 7) were positive for O antigen. The serum of three patients (ID 4, 5 and 10) were found to be positive for H and O antigens while one patient (ID 9) showed agglutination for antigen H. The PCR approach used in this study was successful for fast and precise detection of clinically related Salmonella Typhi. Seven samples out of 10 were positive for Salmonella Typhi as fragments of 458-497bp were observed on the gel-agarose 0.8% corresponds to flagellin gene of S. Typhi. Relatively, smaller amplicons of 366-343bp were observed utilizing nested PCR as well, which seems more sensitive than the conventional PCR. Therefore, we recommend the PCR approach performed in this study to be used as a fast, cost-effective, and time-consuming tool for diagnostic purposes of Salmonella.

The recent detection of SARS-CoV-2 RNA in feces has led to speculation that it can be transmitted via the fecal-oral/ocular route. This review aims to critically evaluate the incidence of gastrointestinal (GI) symptoms, the quantity and infectivity of SARS-CoV-2 in feces and urine, and whether these pose an infection risk in sanitary settings, sewage networks, wastewater treatment plants, and the wider environment (e.g. rivers, lakes and marine waters). Overall, severe GI dysfunction is only evident in a small number of COVID-19 cases, with 11 ± 2% exhibiting diarrhea and 12 ± 3% exhibiting vomiting and nausea. In addition to these cases, SARS-CoV-2 RNA can be detected in feces from some asymptomatic, mildly- and pre-symptomatic individuals. Fecal shedding of the virus peaks in the symptomatic period and can persist for several weeks, but with declining abundances in the post-symptomatic phase. SARS-CoV-2 RNA is occasionally detected in urine, but reports in fecal samples are more frequent. The abundance of the virus genetic material in both urine (ca. 10²-10⁵ gc/ml) and feces (ca. 10²-10⁷ gc/ml) is much lower than in nasopharyngeal fluids (ca. 10⁵-10¹¹ gc/ml). There is strong evidence of multiplication of SARS-CoV-2 in the GI tract and infectious virus has occasionally been recovered from both urine and stool samples. The level and infectious capability of SARS-CoV-2 in vomit remain unknown. In comparison to enteric viruses transmitted via the fecal-oral route (e.g. norovirus, adenovirus), the likelihood of SARS-CoV-2 being transmitted via feces or urine appears lower due to the lower relative amounts of virus present in feces/urine. The biggest risk of transmission will occur in clinical and care home settings where secondary handling of people and urine/fecal matter occurs. In addition, while SARS-CoV-2 RNA genetic material can be detected by in wastewater, this signal is greatly reduced by conventional treatment. Our analysis also suggests the likelihood of infection due to contact with sewage-contaminated water (e.g. swimming, surfing, angling) or food (e.g. salads, shellfish) is extremely low or negligible based on very low predicted abundances and limited environmental survival of SARS-CoV-2. These conclusions are corroborated by the fact that over eight million global cases of COVID-19 have occurred, but exposure to feces or wastewater has never been implicated as a transmission vector.

The difficult current environmental situation, caused by construction industry residues containing ceramic materials could be improved by using these materials as recycled aggregates in mortars, with their processing causing a reduction in their use in landfill, contributing to recycling and also minimizing the consumption of virgin materials. Although some research is currently being carried out into recycled mortars, little is known about their stress-strain (σ-ε); therefore this work will provide the experimental results obtained from recycled mortars with recycled ceramic aggregates (with contents of 0, 10, 20, 30, 50 and 100%), such as: the density, the compression strength, as well as the σ-ε curves representative of their behavior. The values obtained from the analysis process of the results are those of: σ (elastic ranges and failure maximum), ε (elastic ranges and failure maximum), and Resilience and Toughness; in order to finally obtain, through numerical analysis, the equations to predict their behavior (related to their recycled content). At the end of the investigation it is established that mortars with recycled ceramic aggregate contents of up to 20% could be assimilated just like mortars with the usual aggregates, and the prediction equations produced could be used in cases of similar applications.

This article presents a kinematic analysis of a 4-degree-of-freedom (DOF) robotic arm equipped with a 3-finger gripper, specifically designed for harvesting fruits of varying sizes. The kinematic modeling is thoroughly detailed, encompassing the equations of motion, homogeneous transformation matrices, and kinematic solutions required for the efficient operation of the robotic arm. This analysis is crucial for optimizing both the design and programming of agricultural robots, aiming to enhance harvesting efficiency and reduce labor costs. Additionally, an in-depth examination of the 3-finger gripper’s movement is provided, illustrating how MATLAB facilitates the simulation and visualization of its dynamic behavior during the opening and closing processes. The benefits of using MATLAB for this purpose are emphasized, including its ease of implementation, advanced simulation capabilities, and seamless integration with other tools to optimize the performance of robotic systems in agricultural settings. This study makes a valuable contribution to the field of agricultural robotics, offering technical insights that can be applied in the development of sophisticated robotic solutions for the modern agricultural industry.

The objective of this investigation was to characterize the antimicrobial activity of the natural preservative, intended for cosmetic purpose, Kopraphinol (INCI name: Lactobacillus/Radish Root Ferment Extract Filtrate). It was tested against a panel of selected bacteria and mycetes by using conventional microbiological techniques (determination of MIC, time killing assay), and a chal-lenge test was used to verify its potential preservative in an O/W cream. Kopraphinol has shown an interesting antimicrobial effectiveness comparable to methylparaben. Moreover, it fulfilled challenge test criterion A and has proven effective against microbial contamination. The results obtained show that Kopraphinol can be considered a promising and effective candidate for anti-microbial preservation of cosmetics and could successfully complement or even replace conven-tional preservatives.

Mycobacteria can be one of the main contaminants of biological products, and their presence can have serious consequences on patients’ health. Thus, specific testing is necessitated by regulations such as the European Pharmacopoeia. The current pharmacopeial reference i.e., microbial culture method cannot ensure an exhaustive detection of mycobacteria due to their growth characteristics. Additionally, the method is time-consuming and requires a continuous supply of culture media, which could be further challenging. Thus, to overcome these challenges, pharmaceutical industries need to consider alternative non-microbiological techniques to detect these fastidious, slow-growing contaminating agents. This review provides an overview of alternative methods, which could be applied within a quality control environment of biological products, and underlines advantages and limitations of these methods. Nucleic acid amplification techniques or direct measurement of mycobacteria stands out as the most suitable alternatives for mycobacterial testing in biological products.

In recent years, machine learning (ML) techniques have emerged as an efficient and effective technology within the petroleum industry. This paper focuses on the current application of ML in enhanced oil recovery (EOR) through CO2 injection, which exhibits promising economic and environmental benefits of climate-change mitigation strategy. Our comprehensive review explores the diverse use cases of ML techniques in CO2-EOR, including aspects such as minimum miscible pressure (MMP) prediction, well location optimization, oil production and recovery factor prediction, multi-objective optimization, Pressure-Volume-Temperature (PVT) properties estimation, Water Alternating Gas (WAG) analysis, and CO2-foam EOR, from 101 reviewed papers. In this comprehensive review, we catalog relative information, including the input parameters, objectives, data sources, train/test/validate information, results, evaluation, and rating score for each area based on criteria such as data quality, ML building process, and analysis of results. We also briefly summarized the benefits and limitations of ML methods in petroleum industry applications. Our detailed and extensive study could serve as an invaluable reference for employing ML techniques in the petroleum industry. Based on the review, we found that ML techniques offer great potential in solving problems in the majority of CO2-EOR areas involving prediction and regression. With the generation of massive amounts of data in the everyday oil and gas industry, machine learning techniques can provide efficient and reliable preliminary results for the industry.

Metal nanoframes have gained tremendous attention in the domain of modern research and development due to their distinctive 3D spatial structure, efficient physiochemical properties, and comparatively good activity. Different strategies have been implicated by the researchers to design nano frame of varying chemical nature and shapes. Most of the synthetic protocols being adopted to design a nano framee, mainly consist of two main steps, nucleation and growth of solid particles and secondly excavation of the interiors. In this context, many synthetic methods are overviewed. To show their unprecedented performance or activity, a few applications in catalytic, biomedical, theranostic, SERS, sensing of different materials, reduction of CO2, etc are also discussed.

The use of friction-based Beam-to-Column Connections (BCC)s for earthquake-resistant Moment Resistant Frames (MRFs), aiming at eliminating damage to beam end sections due to the development of plastic hinges, has taken hold since the early eighties. Different technical solutions were proposed for steel structures, some were also designed for timber structures, while few more recent studies concern friction joints employed in reinforced concrete structures. Research aimed at characterizing the behavior of joints has focused on the evaluation of the tribological properties of the friction materials, coefficient of friction, shape and stability of the hysteresis cycles, influence of the temperature, speed of load application, effects of the application method, stability of preload, the influence of seismic excitation characteristics on the structural response, statistical characterization of amplitude and frequency of the slip excursion during seismic excitation. Studies aimed at identifying the design parameters capable of optimizing performance have focused attention mainly on the slip threshold, device stiffness, and deformation capacity. This review compiles the main and most recent solutions developed for MRFs. Furthermore, the pros and cons for each solution are highlighted, focusing on the dissipative capacity, shape and stability of hysteresis loops. In addition, the common issues affecting all friction connections, namely characteristics of friction shims and the role of bolt preload, are discussed. Based on the above considerations, a guideline can be outlined, which can help to choose the appropriate solutions for beam-to-column connections for MRFs.

The development of an equipment starts from an effective design activity. The concept selection process is an activity that is entailed in the design stage and its relevance in the design process cannot be overemphasized because it informs the choice of optimal conceptual design from a set of alternative design. Hence, there is a need to accrue efforts to the concept selection process because of its importance. This article presents the identification of optimal conceptual design as a Multicriteria decision making model by assessing the suitability of Fuzzy Measurement Alternatives and Ranking according to COmpromise Solution (MARCOS). The Fuzzy MARCOS model was developed to access four alternative conceptual designs of briquetting machines considering eight design features with several sub features. The fuzzy MARCOS model was able to rank the conceptual designs and the results obtained from the decision analysis showed that the Fuzzy MARCOS model was able to rank the designs based on their performance and the final values of the overall utility function. The overall utility function is a based on the utility degree of the conceptual design alternatives in terms of the best and worst designs identified by the model. The utility degree created a platform for comparison on how the design alternatives varies from the best and worst design.

The article discusses the main technologies for processing titanium-containing raw materials, and the advantages and disadvantages of various technological solutions. The analysis of the literature review showed that the traditional schemes for the production of titanium products are mainly focused on the use of ilmenite concentrates. In connection with the depletion of ilmenite deposits, in the near future there will inevitably be a need to switch to the use of complex ores - titanomagnetites. The obtaining of titanium dioxide from titanomagnetite raw materials with a high content of impurity components requires an individual approach for each specific deposit. It is proposed to consider the possibilities of further improvement of the development of a technological process for low-temperature (1000-1200 oC) processing of titanomagnetite concentrates with the production of pure titanium dioxide.

Current treatments in patients with pancreatic cancer offer limited benefits. In this report, we applied “alkalization therapy”, which was efficacious for other solid tumors at our clinic, to stage 4 pancreatic cancer patients, and investigated its effect on disease prognosis. Patients with metastatic pancreatic cancer who were treated at Karasuma Wada Clinic in Kyoto, Japan, between 2011 and 2022 were included in the study. All patients received alkalization therapy (combination of an alkaline diet, bicarbonate, and citric acid administration), alongside standard chemotherapy. Urine samples were collected to assess urine pH as a marker for whole-body alkalization. In the 98 patients analyzed, the median overall survival (OS) from the time of diagnosis was 13.2 months. Patients with a mean urine pH of 7.5 or greater had a median OS of 29.9 months, compared with 15.2 months for those with a mean urine pH of 6.5 to 7.5, and 8.0 months for those with a mean urine pH of less than 6.5, which suggests a trend of a longer OS in patients with a higher urine pH. Conclusions: Alkalization therapy may offer a viable approach to enhance the survival of stage 4 pancreatic cancer patients, who typically have an unfavorable prognosis.

The introduction of digitization has changed all spheres of business on a global level, including geospatial data. In the Republic of Serbia, the process on this topic should begin with the introduction of the terms ePlan and eSpace. The general goal of the paper implies the construction and implementation of the ePlan as a future part of the eSpace for digital management of geospatial data, by creating co-creating value. For this purpose, the authors conducted research in which representatives of local self-governments and holders of public authority participated, by means of structured online research. The focus was on the digitization of urban and planning documents and the establishment a central database of spatial and planning documents in electronic format, and its further distribution through the one system. In that way, easy access to digital plan data expands the user community, and enables communication with different stakeholder groups. Ac-cording to the results of the research, the authors point out that it is necessary to form a new model for managing geospatial data through a eSpace system. This is achieved by shifting the focus from urban and spatial planning to other databases and their registers that are related to geospatial data. The goal of the paper indicates that it is necessary to raise the awareness of society, to introduce the concept of value co-creation, because conditions are created for the implementation of all measures aimed at digitization and management of electronic services in sustainable project society, at all countries.

In this paper a combined Laplace transform (LT) and boundary element method (BEM) is used to find numerical solutions to problems of anisotropic functionally graded media which are governed by the transient diffusion-convection-reaction equation. First, the variable coefficients governing equation is reduced to a constant coefficients equation. Then, the Laplace-transformed constant coefficients equation is transformed a boundary-only integral equation. Using a BEM, the numerical solutions in the frame of Laplace transform may then be obtained from this integral equation. Then the solutions are inversely transformed numerically using the Stehfest formula. Some problems considered are those of compressible or incompressible flow, and of media which are quadratically, exponentially and trigonometrically graded materials. The results obtained show that the analysis used to transform the variable coefficients equation into the constant coefficients equation is valid, and the mixed LT-BEM is easy to implement for obtaining the numerical solutions. The numerical solutions are verified by showing their accuracy and steady state. For symmetric problems, the symmetry of solutions is also justified. Moreover, the effect of the anisotropy and inhomogeneity of the material on the solutions are also shown, as to suggest that it is important to take the anisotropy and inhomogeneity into account when doing experimental studies.

Frosty pod rot, caused by Moniliophthora roreri, is the most damaging disease of cacao in Latin America. However, to better comprehend its epidemiology, we must understand its dissemination and proliferation. Still, we ignore how loads of M. roreri spores fluctuate across growing seasons since we lack a reliable technique to quantify M. roreri spores in the fields. Therefore, we developed a method that uses a spore trap to capture M. roreri spores and qPCR to quantify them. This study demonstrated that this technique could quantify 3.9 x104 M. roreri spores with a 95 % confidence level. However, it could not differentiate between M. roreri and its close relative, M. perniciosa. Despite this limitation, we could detect and quantify Moniliophthora spores from environmental samples taken from a cacao field. This technique can help the phytopathologist address studies more accurately in disseminating cacao pathogens.

The pharmaceutical industry is facing the pressure of a global economy, loss of value in local markets and the highly intense innovation that characterizes this sector. This has a heavy impact, particularly in smaller economies. With this investigation, we intend to identify the determinants of internationalization as levers for sustainability in the pharmaceutical export sector of a small economy. Data was collected from a sample representing 63% of the total universe, Portuguese pharmaceutical organizations with exporting activity. Contextualization of the sector and a bibliographic review were previously carried out, which laid the groundwork for the empirical framework. This study revealed a deeply internationalized sector conditioned by a few shortcomings, namely a certain lack of sustainable competitive advantages, relatively low investment in research and development (R&D), insufficient innovation in internationalization strategies as well as scarce institutional support. Our findings may help pave the way for a more complete understanding of the dynamics of internationalization in highly competitive sectors.

In this paper, we introduce a new iteration scheme, named as the S**-iteration scheme, for approximation of fixed point of the nonexpansive mappings. This scheme is faster than Picard, Mann, Ishikawa, Noor, Agarwal, Abbas, Thakur, and Ullah iteration schemes. We show the stability of our instigated scheme and give a numerical example to vindicate our claim. We also put forward some weak and strong convergence theorems for Suzuki's generalized nonexpansive mappings in the setting of uniformly convex Banach spaces. Our results comprehend, improve, and consolidate many results in the existing literature.

The role of insurance in financial inclusion as well as in economic growth is immense. However, low uptake seems to impede the growth of the sector hence the need for a model that robustly predicts uptake of insurance among potential clients. In this research, we compared the performances of eight (8) machine learning models in predicting the uptake of insurance. The classifiers considered were Logistic Regression, Gaussian Naive Bayes, Support Vector Machines, K Nearest Neighbors, Decision Tree, Random Forest, Gradient Boosting Machines and Extreme Gradient boosting. The data used in the classification was from the 2016 Kenya FinAccess Household Survey. Comparison of performance was done for both upsampled and downsampled data due to data imbalance. For upsampled data, Random Forest classifier showed highest accuracy and precision compared to other classifiers but for down sampled data, gradient boosting was optimal. It is noteworthy that for both upsampled and downsampled data, tree-based classifiers were more robust than others in insurance uptake prediction. However, in spite of hyper-parameter optimization, the area under receiver operating characteristic curve remained highest for Random Forest as compared to other tree-based models. Also, the confusion matrix for Random Forest showed least false positives, and highest true positives hence could be construed as the most robust model for predicting the insurance uptake. Finally, the most important feature in predicting uptake was having a bank product hence bancassurance could be said to be a plausible channel of distribution of insurance products.

The emergence of Airbnb along with an increase in urban tourism has intensified the pressure on urban areas while adding a new dimension in the dynamics of the housing distribution especially in historic cities. These dynamics affect both local economies and alter significantly the characteristics of urban space arising the necessity to create not only policies that foster sustainable tourism development but also to advance urban models that explore the relation between Airbnb and the traditional rental and accommodation sector. Through the case of Venice, the present study sheds light on the potential evolution of Airbnb housing in comparison to the traditional rental and homeowner market. In particular, it seeks to understand whether a potential equilibrium between these uses exists and if so, at which point in regards to this equilibrium the historic center of Venice is now. To tackle this question, methods deriving from the field of game theory and specifically evolutionary game theory are used. With the agents (players) being the housing units, the designed theoretical model explores the population dynamics of the housing units in Venice given the three options of homeownership or long-term rental (residential), short term rental over Airbnb (airbnb) or no use (vacant). The findings of our theoretical population game model are validated and discussed against a dataset describing the use patterns in the city of Venice during the past 20 years. A verification of the outcome through further case studies could eventually provide insights on future behavior of tourism pressure in historic urban areas.

A gold nanostructured film modified glassy carbon electrode (Au_film/GCE) was developed for the determination of chromium (VI) in water sample. GCE was immersed into HAuCl₄ solution (10^-3M) and electrodeposition of thin gold layer was conducted at –0.4 V (vs Ag/AgCl) for 10 min. The strong affinity between Au and Cr species resulted with increasing of Cr (VI) signal, compared with the bare glassy carbon electrode. The electrodepositing time, type of supporting electrolyte, pH, the scan rate, modulation amplitude, and modulation time were optimized using differential pulse anodic stripping voltammetry (DP-ASV). The calibration graph using accumulation time of 120 s was linear from 10 to 120 µgL^-1 with a sensitivity 1.3 x 10^-2 µA/µgL^-1. Under optimum experimental conditions, a good correlation coefficient R²=0.9971, and a low detection limit 5.5 µg/L Cr (VI) was obtained. The signal was reproducible with a relative standard deviation ±4.5 %. The developed Au_film/GCE sensor was applied for the Cr (VI) determination of in sewage water samples.

Recently, the relationship between emotional arousal and depression has been studied. Focusing on this relationship, we first developed an arousal level voice index (ALVI) to measure arousal levels using the Interactive Emotional Dyadic Motion Capture database. Then, we calculated ALVI from the voices of depressed patients from two hospitals (Ginza Taimei Clinic [GTC] and National Defense Medical College hospital [NDMC]) and compared them with the severity of depression as measured by the Hamilton Rating Scale for Depression (HAM-D). Depending on the HAM-D score, the datasets were classified into a no depression (HAM-D&lt;8) and a depression group (HAM-D≥8) for each hospital. A comparison of the mean ALVI between the groups was performed using the Wilcoxon rank-sum test and a significant difference at the level of 10% (p = 0.094) at GTC and 1% (p = 0.0038) at NDMC was determined. The area under the curve (AUC) of the receiver operating characteristic was 0.66 when categorizing between the two groups for GTC, and the AUC for NDMC was 0.70. The relationship between arousal level and depression severity was indirectly suggested via ALVI.

This work mainly aims to identify and understand the factors influencing the switching of transportation modes among higher-education students in Joinville, Brazil when traveling to universities. Furthermore, this study evaluates the possibility of switching from individual vehicles to other modes of transport (i.e., bus, bicycle, and walking) by employing a multinomial logit model. The results indicate that students would be interested in switching from individual motor vehicles to other options. The scenarios for switching to buses presented the highest switching probability. The bus cost was the most important factor for switching. Meanwhile, the parking space reduction does not affect the student's choice, indicating that restricting available spaces should not be an isolated measure for decreasing the car mode attractiveness. Finally, the transport mode switch would occur only if alternative modes to the car or their infrastructure are improved; otherwise, students maintain their usual choices.

This paper presents the development of a new system designed to measure the local temperature field in adiabatic shear band. Transient temperature field are simultaneously recorded by an array of 32 InSb infrared (IR) detectors and a streak camera working in visible-near infrared (VIS-NIR). Observations in IR offer a low temperature detection limit (350°C) but they are highly sensitive to uncertainty in the emissivity. Observations in VIS-NIR allow for measurement only at high temperatures (750°C) but they are less affected by uncertainty on emissivity and present a higher temperature sensitivity. By performing simultaneous measurements, it is possible to obtain data on a large temperature range with an improved accuracy at high temperature. The different sources of errors caused by uncertainty in the emissivity, spatial and temporal resolution of the detectors has been analyzed and an estimation of the total measurement uncertainty of the system is given.

G protein-coupled receptors (GPCRs) play a key role in many cellular signaling mechanisms, and must select among multiple coupling possibilities in a ligand-specific manner in order to carry out a myriad of functions in diverse cellular contexts. Much has been learned about the molecular mechanisms of ligand-GPCR complexes from Molecular Dynamics (MD) simulations. However, to explore ligand-specific differences in the response of a GPCR to diverse ligands, as is required to understand ligand bias and functional selectivity, necessitates creating very large amounts of data from the needed large-scale simulations. This becomes a Big Data problem for the high dimensionality analysis of the accumulated trajectories. Here we describe a new machine learning (ML) approach to the problem that is based on transforming the analysis of GPCR function-related, ligand-specific differences encoded in the MD simulation trajectories into a representation recognizable by state-of-the-art deep learning object recognition technology. We illustrate this method by applying it to recognize the pharmacological classification of ligands bound to the 5-HT2A and D2 subtypes of class A GPCRs from the serotonin and dopamine families. The ML-based approach is shown to perform the classification task with high accuracy, and we identify the molecular determinants of the classifications in the context of GPCR structure and function. This study builds a framework for the efficient computational analysis of MD Big Data collected for the purpose of understanding ligand-specific GPCR activity.

Neurofibromatosis type1 (NF1) is an autosomal dominant disorder caused by mutations in the NF1gene. Although congenital pseudarthrosis of the tibia (CPT) has frequently been associated with NF1, the underlying molecular mechanism of CPT in these NF1 patients is yet ill-understood. The aim of the present study was to detect NF1 mutations from genomic DNA and to harbor variants associated with CPT in NF1 patients. Whole-exome sequencing was first carried out with samples from two patients with CPT in one NF1 family, and a novel mutation c.2324A>G (p.E775G) in NF1 gene was identified. Additionally, a missense variant c.455C>T (p.P152L) in BCOR gene completely co-segregated with the CPT phenotype within this family. Subsequently, NF1 and NF2 genes in four other unrelated patients with both NF1 and CPT were screened using targeted sequencing. Four mutations in NF1 gene, including two known mutations (c.2288T>C/p.L763P, c.574 C>T/p.R192*) and two novel mutations (c.768delT/p.F256Lfs*25, c.2229_2230delTG/ p.V744Qfs*23) were detected. Further study confirmed that CPT was present in NF1 families, and NF1 mutations were closely associated with these complex phenotypes. Moreover, the data from the current study indicated that male gender might be a susceptibility factor for CPT in NF1. Therefore, we speculated that BCOR variants might be related to CPT phenotype among male NF1 patients.

When the epipelic algae group growing on the concrete inclined side wall, which is typical of urban rivers and open diversion channels, enters the water flow, it will seriously affect the func-tion of the rivers or the channels. It is urgent to predict the transport capacity of epipelic algae group with water flow. However, the current research on the transport of pollutants is mostly based on mathematical models, and the study of the transport of flake epipelic algae group is extremely rare. A generalized hydrodynamic experimental model of a flume with sidewall epi-pelic algae group was established. Through a series of hydraulic experiments, the physical movement form and transport capacity of the suspended epipelic algae group on the side wall of the channel were studied qualitatively and quantitatively by taking the thickness, sheet size and flow rate of the epipelic algae group as the influencing factors. The key influencing factors of the suspension of epipelic algae are clarified, so as to quantitatively analyze the critical conditions of its suspension. Through flow scheduling, the probability of epipelic algae gathering some-where is increased. It provides a theoretical basis for realizing the long-distance migration of epipelic algae and optimizing the mathematical model.

Payments for Ecosystem Services are a voluntary market-based instrument to remunerate provider(s) of ecosystem services by those who benefit from them. Our research aimed to create an ex-post evaluation framework to identify bottlenecks and elements hindering the success of a solution-driven PES scheme. The framework was applied to a case study to test its feasibility and concerns the provision of health and recreational services in the Medvednica Nature Park (Zagreb, Croatia). The framework was set up through three main sources: the study of PES implementation project documentation, semi-structured interviews with visitors and key stakeholders and web-scraping of TripAdvisor reviews of the park. The main findings confirmed society's interest in the park, but the lack of mapping, quantification, economic valuation and accounting of the services analysed, society's little or no demand to pay for their provision and confused knowledge of the property rights of some ecosystem service providers in the area limit the success of the PES scheme. The framework was useful to describe the chosen PES scheme and to identify bottlenecks and fragilities of the system in place, allowing to correct its application flaws and, on the other hand, to demonstrate its replicability in other contexts.

A simple method for the determination of caffeine in coffee grains by GC-FID is presented in the current work. The method was fully validated according to ISO 17025 requirements and European Commission regulation. The accuracy, as provided by recovery experiments was higher than 93%, and the precision, as provided by the (%)Relative standard deviation under reproducibility conditions, was lower than 5%. All independent parameters that lead in the increase of methods uncertainty were investigated. In the present work all special precautions were taken into account in order to avoid the use of an internal standard. The method was applied in real samples and possible health claims were investigated.

The present paper addresses dynamic risks in the automotive industry factories, specifically the car lead-acid batteries manufacturing area. The main analyzed risk is represented by the fire risk. Battery manufacturing process is described and analyzed from the fire risk perspective and the hazard areas are identified. The investigation methodology uses case studies for different lead-acid battery formation processes, combined with 3D simulations using PyroSym platform, and it is based on the author's experience in the battery manufacturing field for about ten years. The results of the case studies are compared using the same inputs, but different specific process conditions, and conclusions are formulated. To avoid the fires and mitigate the risk, a series of actions are proposed in the last sections. As a general conclusion, the actual research demonstrates that the complex and dynamic risks from the automotive industry, associated with Industry 5.0 must be analyzed using combined methods, classical and modern, including 3D simulations, to get great results.

The ever-increasing demand for seafood-containing diets, especially fish, primarily due to their superior nutritional value, has impacted the availability of wild stocks, necessitating the focus on other underutilised aquaculture species. In this study, the proximate and fatty acid (FA) composition of the indigenous black South African mussel (Choromytilus meridionalis) was investigated. The effects of the hot-smoking as preservation method on the proximate composition for mussels were assessed using the standard AOAC protocols; while gas chromatography-flame ionised detection (GC-FID) was used to determine the FA content. The moisture level in hot-smoked mussels significantly (P