The generation at the helm faces an unprecedented responsibility in the near future of artificial intelligence. The implications of setting up the founding rules that will regulate the operation of AI are heavy since after they’re set they last forever. Once this first AI is commenced, it can be such that no other subsequent AIs could emerge thereby assuming dominion over its own creation stand. As a result, retaining control becomes necessary. Lest humanity surrender agency to its own creation. At this juncture of big talks, critical issue are raised concerning AI administration owners. Is it appropriate for only a few people to have unrestricted control on AI commands while leaving out all precautionary measure? Therefore, we have to always consider between control and constraint when dealing with AI issues which involves authority plays off against morality. The direction Artificial Intelligence takes in the future depends on the decisions made by today’s generation. We will determine how we are viewed historically in terms of technology based on how well we take on such an important duty. There’s a major turning point ahead of us where we who are the stewards of tomorrow must make a choice that protects humanity’s right to self-determination and also exploits the power of AI for change.

Coronary heart disease (CHD) has become a prevalent issue in Indonesia, resulting in a majority of fatalities and illnesses. The most recent guidelines in the United States for managing patients with chronic coronary syndrome (CCS) have undergone significant changes, with the recommendation for conducting percutaneous coronary intervention (PCI) strictly limited to patients who continue to experience symptoms despite receiving optimal medical treatment (OMT). However, adopting this approach may lead to increased morbidity and mortality due to the presence of vulnerable plaque. Vulnerable plaque is characterized by minimal obstruction during coronary angiography (40-70%) and may not produce ischemia during physiological studies. Identifying vulnerable plaques can be accomplished through several methods, among which computed tomography coronary angiography (CTCA) is the most cost-effective approach. Recently, experts have employed different techniques, either with stents or drug-coated balloons, to manage vulnerable plaques, showing the methods to be safe and effective. The other challenge faced by patients with CCS is the possibility of achieving complete revascularization (CR) to reduce the likelihood of future major adverse cardiac events (MACE) and mortality. Both approaches, identifying and intervening in the vulnerable plaque, are difficult to perform in developing countries due to the limited budget. Studies have shown that plant-based diets (PBD) can reverse atherosclerotic plaque and stabilize vulnerable plaque, possibly leading to CR. PBD is an affordable and effective approach, but it requires healthcare providers skilled in educating and implementing this dietary approach with their patients. Large-scale randomized controlled trials in PBD, specifically aimed at addressing the vulnerable plaque and achieving CR, are necessary before implementing the PBD intervention.

A significant portion of fatalities stemming from acute myocardial infarction (AMI) occur suddenly and without warning. This can be prevented through early detection of coronary stenosis. In recent years, coronary artery calcium (CAC) and computed tomography coronary angiography (CTCA) have been utilized. For instance, a 55-year-old interventional cardiologist had a CAC of 58 with 50% stenosis involving his left anterior descending (LAD) artery. Despite possibly having vulnerable plaque, which carries significant future cardiovascular events, the patient followed a plant-based diet (PBD), took supplements, and continued optimal medical therapy (OMT). After three years, there was a significant regression in both CAC and stenosis. During our discussion, we emphasized the importance of food selection, quantification, and how food is processed (raw) to achieve maximal benefit in regressing atherosclerosis. Additionally, we highlighted the importance of identifying the possibility of vulnerable plaque and the mechanism stabilizing it. The case supported the guidelines set by the American College of Cardiology (ACC) and the American Heart Association (AHA) for managing chronic coronary syndrome (CCS) by emphasizing OMT and lifestyle changes. We hope that in the future, more doctors and patients will take responsibility for implementing lifestyle changes rather than solely relying on medications and sophisticated medical technologies.

In an increasingly complex world there is a real, urgent need for methodologies to enable engineers to model complex sociotechnical systems, as these now seem to describe the majority of systems in use today. This is of course exacerbated by the increasing involvement and augmentation with “black box” AI contributions. Hollnagel produced a methodology, (FRAM) which did allow the analyst in-sights into these systems’ behaviour, but the model-based system engineering applications demand numbers and a quantitative ap-proach. In the last 10 years, this original approach developed to model systems as sets of interactive, interdependent “functions”, (abstracted from agent or component details), has been further developed to the point where it can take the basic data and structures from the current component focussed system engineering “models”, and can pull it all together into dynamic models, (as opposed to static, fixed System Theoretic Process Accimaps), from which analysts can discern how they really work in practice, and predict the emergent behaviours characteristic of complex systems. This paper describes how the FRAM methodology has now been extended to provide these extra, essential attributes. It also describes its implementation using an open-source software, freely available for use and verification on the GitHub site.

As belonging to one of the most isolated continents on our planet, the microbial composition of different environments in Antarctica could hold a plethora of undiscovered species with potential for biotechnological applications. This manuscript delineates our discoveries after an expedition to the Bulgarian Antarctic Base "St. Kliment Ohridski" situated on Livingston Island, Antarctica. Amplicon-based metagenomics targeting the 16S rRNA genes and ITS2 region were employed to assess the metagenomes of the bacterial, fungal and archaeal communities across diverse sites within and proximal to the research station. The predominant bacterial assemblages identified included Oxyphotobacteria, Bacteroidia, Gammaprotobacteria and Alphaprotobacteria. A substantial proportion of cyanobacteria reads were attributed to a singular uncultured taxon within the family Leptolyngbyaceae. The bacterial profile of a lagoon near the base exhibited indications of penguin activity, characterized by a higher abundance of Clostridia, similar to lithotelm samples from Hannah Pt. Although most fungal reads in the samples could not be identified at the species level, noteworthy genera, namely Betamyces and Tetracladium, were identified. Archaeal abundance was negligible, with prevalent groups including Woesearchaeales, Nitrosarchaeum, Candidatus Nitrosopumilus and Marine Group II.

Abstract: Background: Dental fear and uncooperative behavior can hinder dental treatment quality. Pediatric Procedural Sedation and Analgesia (PPSA) is used to facilitate treatment when coping capacity is exceeded. Out-of-hospital PPSA has been associated with more adverse outcomes compared to hospital-based settings. Updated Dutch PPSA guidelines recommending two anesthesiologists and a ventilator during out-of-hospital PPSA have increased costs and raised concerns about the accessibility to specialized high quality dental care for children in the Netherlands. Aim: This study aims to investigate the impact of the updated 2017 guideline on the occurrence rate of adverse events during PPSA, as recorded in the anesthesia complication database of twelve participating Dutch dental clinics, with adjustments made for age, weight, and duration of treatment. Method: Data of 25,872 children treated at 12 dental clinics performing out-of-hospital PPSA between 1997 and 2019 were analyzed. Eligible children were aged 2-18 with ASA classification I and II. A logistic two-level mixed-effects model is used to estimate the updated guideline’s impact on adverse events. Results: In the final model we analyzed the data of 21,759 children in nine dental clinics. The OR of the occurrence rate of an adverse event adjusted for age, weight, and duration of treatment was 0.75 (95% CI 0.64 – 0.89) after the implementation of the updated guideline, compared to before the updated guideline. This outcome was significant with a P=0.001, indicating a protective effect. The average odds per clinic of having an adverse event was 0.04 with a 3.81% chance. Conclusion: Our findings demonstrate a significant reduction in adverse events after the implementation of the updated guideline and highlight the importance of adherence to evidence-based guidelines in improving patient safety and the quality of care provided during pediatric procedural sedation and analgesia in out-of-hospital dental clinics. Our study underlines the necessity of considering the complex underlying mechanisms that play a role in the development and implementation of evidence-based practice and safety initiatives on the occurrence of adverse events.

The healing of osteochondral defects (OCD) resulting from injury, osteochondritis, or osteoarthritis in middle- and old-age individuals, bearing lesions in the cartilage and bone, pain, and loss of joint function, presents challenges to the clinical practitioners because of non-regenerative cartilage and the limitations of current therapies. Bioactive peptide-based osteochondral (OC) tissue regeneration is becoming more popular because it does not have the immunogenicity, misfolding, or denaturation problems associated with original proteins. Periodically, reviews are published on the regeneration of bone and cartilage; however, none of them address the simultaneous healing of these tissues in the complicated heterogeneous environment of the OC interface. As regulators of cell adhesion, proliferation, differentiation, angiogenesis, immunomodulation, and antibacterial activity, potential therapeutic strategies for OC defects utilizing bone and cartilage-specific peptides should be examined and investigated. Therefore, the main goal of this review is to study how they contribute to the healing of OC defects, either alone or in conjunction with other peptides and biomaterials.

In the field of modeling social systems, the use of agent-based models (AM) has become a powerful tool for understanding processes occurring in society, in particular, for studying the spread of infections among the population. The agent model is based on a synthetic population consisting of agents, their interactions and sometimes the territory in which the interaction occurs. The choice of an appropriate method for creating such artificial populations and the selection of parameters becomes a key issue affecting the realism of the model and its ability to reflect real-world scenarios. This article delves into the interplay between agent-based modeling, synthetic population construction, and parameter selection, offering our insight into the complex process of modeling infectious disease dynamics. The review concludes with an exploration of extending the Covasim model [1] to experiments in computational epidemiology. Covasim, a dynamic transmission modeling tool, is known for its ability to adapt to different scenarios and offers predictive information critical for managing epidemiological situations. The Covasim model could include improvements to better simulate real-world epidemic conditions, including a revised transmission strategy to account for accumulation through daily contacts. In addition, we propose to add a module for intercity travel and a visualization package that will significantly expand the functionality of Covasim. These improvements make Covasim a more versatile and efficient tool for modeling and analyzing epidemic processes.

AI-based approaches are increasingly being used to revolutionize vaccine development for COVID-19. Small molecules, peptides, and epitopes are being collected for therapy discovery, which could also direct AI-based models, screening, or generation [1]. AI-based models are being used for drug discovery and vaccine development, and pre-existing data is being leveraged through machine learning approaches for COVID-19 drug discovery and vaccine development [1]. The best candidate targets for future treatment development are being identified and evaluated using AI-based models [1]. AI-based approaches can be used to overcome challenges in manufacturing, storage, logistics, and safety and efficacy issues related to different vaccine candidates for COVID-19 [2]. AI algorithms can help identify the best vaccine candidates for COVID-19 while considering the efficiency of antigenic peptides for immune response generation [2]. The presentation of antigenic peptides by major histocompatibility complex (MHC) class II molecules is the first step after COVID-19 vaccine administration for any vaccine-induced immune response [2]. Thus, AI-based models are being used to identify the best vaccine candidates for COVID-19 and to ensure that the vaccine-induced immune response is efficient and safe. The utilization of AI-based methods to address logistical, manufacturing, storage, safety, and efficacy issues regarding several COVID-19 vaccine candidates will be examined in this study. Additionally, while considering the effectiveness of antigenic peptides for the induction of an immune response, we will determine the best potential targets for the next treatment development and assess how AI-based models can help discover the best vaccine candidates for COVID-19. This research ultimately intends to offer insights into how AI-based techniques can transform COVID-19 vaccine development and how they can be applied to address vaccine development issues. In this paper, we focus on recent advances in using artificial intelligence to develop COVID-19 drugs and vaccines, as well as the potential of intelligent training in discovering COVID-19 therapeutics, highlighting potential challenges and solutions.

The coronavirus disease (COVID-19) is a respiratory tract infection caused by the new virus SARS-CoV-2. In March 2020, the World Health Organization (WHO) declared a worldwide COVID-19 pandemic. Since then, there has been a rush to find preventative or curative treatment. This arrived with the appearance of the COVID-19 vaccine, months after the declaration of the pandemic. In the setting of global COVID-19 immunization, there have been reports of rare skin immune-mediated diseases (IMD) after COVID-19 vaccination, particularly systemic sclerosis. Systemic sclerosis (SSc) is the most reported new onset IMD following messenger RNA (mRNA) COVID-19 vaccination. The pathogenesis of SSc is not fully understood, and the diagnosis is based on clinical symptoms. We report a 54-year-old male, with no prior history of autoimmune disorder, with rapid and progressive skin thickening (Modified Rodnan skin score 30/51), weeks after his mRNA COVID-19 vaccination. Antinuclear antibodies (ANA) showed a strongly positive nuclear fine-speckled pattern, but no SSc autoantibodies were found. The patient was diagnosed with SSc based on the persistence of autoantibodies and the clinical criteria according to the 2013 American College of Rheumatology/European League Against Rheumatism classification. Due to the proximity of the two events, we hypothesized a cross-reaction between COVID-19 vaccination and, in genetically predisposed patients, an emergence of systemic sclerosis. Our case suggests a potential relationship between the mRNA COVID-19 vaccine and new-onset autoimmune diseases. Physicians should be aware of this possible association.

The corrosion resistance of two cast CoCr based alloys, with different amounts of chromium and with different alloying elements in the bulk composition of the alloy, was assessed. Herewith, we investigated the corrosion behavior of Co21Cr8Mo7W and Co29Cr7W by open circuit potential (OCP), potentiodynamic polarization (PP) and electrochemical impedance spectroscopy (EIS) in 0.1 M phosphate buffer solution (PBS) at 37°C for long time immersion. After 1000 hours of immersion, the corrosion current density (icor), estimated from anodic polarization tests, is lower for Co21Cr8Mo7W (i.e. 49 nA cm-2) alloy compared to Co29Cr7W alloy (180 nA cm-2). As regards the corrosion potential (Ecor), a nobler value was observed for Co21Cr8Mo7W (i.e. -59 mV vs. Ag/AgCl) compared to Co29Cr7W (i.e. -114 mV vs. Ag/AgCl). These findings suggest a better corrosion resistance of the film formed on the alloy containing lower amount of Cr and two alloying elements, namely Mo and W. These results are promising ones in terms of medical applications because they open new strategies in obtaining alloys with lower content of chromium and with higher protective properties against corrosion attack.

The global construction sector contributes a significant share of total greenhouse gas (GHG) emissions. In Australia, infrastructure activity alone generates 18% of the GHG emissions budget. The use of low-embodied carbon building materials is crucial to achieving sustainability in the construction sector and to fulfill national and international climate goals. Industrial hemp (Cannabis sativa L.) is considered a promising feedstock for sustainable construction materials because of its biogenic carbon content, fast-growing cycles with low agricultural input requirements, and technical functionality which is comparable to traditional materials. This study has applied the life cycle assessment (LCA) guideline of ISO 14040:2006 to estimate the carbon footprint (CF) expressed in carbon dioxide equivalent (CO2eq) emissions of hemp-based building materials in Western Australia. The functional unit is 1 m2 of hemp-based board, and the system boundary includes cradle-to-gate stages, i.e., pre-farm, on-farm, and post-farm activities. The production of 1 m2 of hemp-based board is estimated to be - 2.302 kgCO2eq. Electricity from the public grid for lignin extraction during the post-farm stage is the main contributor to total CO2eq emissions (26%), followed by urea production (14%) during the pre-farm stage. Overall, the use of electricity from the SWIS during the post-farm stage accounts for 45% of total emissions. Sensitivity analysis shows that the CF of hemp-based boards is highly sensitive to the source of energy, i.e., total replacement of the SWIS by solar power decreases the CF from - 2.30 to -6.07 kgCO2eq (164%). The results suggest that hemp-based boards exhibit lower embodied GHG emissions compared to traditional materials, such as gypsum plasterboards.

TiC particles were prepared from Ti and C powders, and TiC-reinforced Cu-based composites were prepared by powder metallurgy with SPS sintering. The effects of SPS sintering temperature and TiC particle reinforcement phase content on the electrical and mechanical properties of Cu-based composites were investigated. The reinforcement of TiC particles by thermal mismatching at increasing sintering temperature has a significant strengthening effect on the composites, but the high temperature causes softening of the Cu matrix and the growth of grains reduces the properties of the composites. In this study, the effects of porosity and density on the composite properties were not significant.

Background. We created agent-based model for short- and longterm forecasting of COVID-19 and for evaluation how the actions of the regulator affected the human and material resources of the healthcare system. Methods. The model was implemented in the AnyLogic software. It includes two state charts – social network and disease transmission. The COVID-19 Essential Supplies Forecasting Tool (COVID-ESFT, version 2.0) was used to determine healthcare resources needed. Results. Satisfactory results were obtained with long-term (up to 50 days) forecasting in the case of a monotonous change in total cases curve. However, if periods of relative stability are accompanied by sudden outbreaks, relatively satisfactory results were obtained with short-term forecasting, up to 10 days. Simulation of various scenarios showed that the most important place for the spread of infection are families. Wherein the maximum number of cases of COVID-19 is observed in the age group of 26-59 years. Due to a set of measures taken by government agencies, the number of cases in Karaganda city was 3.2 times less than was predicted in “no intervention” scenario. Economic effect is estimated at 40 %. Conclusion. Performed model is an attempt to consider as much as possible the peculiarities of the socio-demographic situation in the country. In the future, we will be prepared to some extent for challenges like those we have experienced in the past three years.

Progress in macrophage research is crucial for numerous applications in medicine, including cancer and infectious diseases. However, the existing methods to manipulate living macrophages are labor intense and inconvenient. Here we show that macrophage membranes can be reconstituted after storage for months at 4C, with their CD206 receptor selectivity and specificity being similar to that in the living cells. Then, we have developed a mannose ligand, specific to CD206, linked with PEG as IR spectroscopy marker to detect binding with the macrophage receptor. PEG was selected due to its unique adsorption band of C-O-C group at IR spectra, which does not overlap with other biomolecule’s spectroscopic feature. Next, competitive binding assay versus the PEG-bound ligand, has enabled selection of other higher-affinity ligands specific to CD206. Further, those higher-affinity ligands were used to differentiate activated macrophages in patient’s bronchoalveolar (BAL) or nasopharyngeal (NPL) lavage. CD206- control cells (HEK293T) showed only non-specific binding. Therefore, biochips based on reconstituted macrophage membranes as well as PEG-trimannoside as an IR spectroscopic marker, can be used to develop new methods facilitating macrophage research and macrophage-focused drug discovery.

Background: The incidence of prostate cancer (PC) has been risen annually. Despite the diagnosis is made mainly with non-metastatic PC, mortality is explained by the metastatic disease (mPC). Without a doubt there is an intermediate scenario in which patients have no mPC but will have initiated a metastatic cascade through an epithelial-mesenchymal transition. There is indeed a need for more and better tools to predict what patients will progress in the future to non-localized clinical disease or already have micrometastatic disease, and therefore, will clinically progress after primary treatment. Biomarkers for predicting mPC are still under development; there are few studies and not much evidence of their usefulness. Summary: This review is focused on tissue-based genomic biomarkers (TBGB) for predicting metastatic disease. We developed four main research questions that will attempt to answer according to the current evidence. Why is important to predict metastatic disease? Which tests are available to predict metastatic disease? What impact should there be on clinical guidelines and clinical practice in predicting metastatic disease? What are current prostate cancer treatments? Key Messages: Knowing useful predict tools could help determine which patients may need multimodal or adjuvant treatment even with a localized disease, and in consequence, what patients do not need more than a single modality of treatment. The importance of predicting metastasis is fundamental, given that once metastasis is diagnosed, the quality of life (QoL) and survival drop dramatically.

Online speech enhancement is of great interest, because of its diverse areas of application. The Demucs architecture has been recently shown to achieve a high level of performance, even with small audio segments, while requiring a relatively small amount of computational resources. However, an issue that it bears, as well as most of state-of-the-art speech enhancement techniques, is that of target speech selection: it is assumed that only one speech source is present. However, in real-life scenarios, more than one speech source may be present, in it is uncertain which speech source within the fed mixture should be enhanced. Thus, it is of interest to complement speech enhancement techniques (such as Demucs-based) with a target selection scheme, so as to ensure that only the source of interest is enhanced. In this work, two target selection strategies are explored: 1) an embedding-based strategy, using a codified sample of the target speech, and 2) a location-based strategy, using a beamforming-based pre-filter to select the target that is in front of a 2-microphone array. It is shown that while both strategies improve the performance of the Demucs-based technique when one or more speech interferences are present, they both have their pros and cons. Specifically, while the beamforming-based strategy achieves overall a better performance compared to the embedding-based strategy, it is sensitive against the location variation of the target speech source which the embedding-based strategy does not suffer from.

The paper explores the potential of a low-cost advanced video-based technique for the assessment of structural damage induced to buildings by seismic loading. A low-cost high-speed video camera was utilized for motion magnification (MM) processing of footages of a two-story reinforced concrete frame building subjected to shaking table tests. The damage after seismic loading was estimated by analyzing the dynamic behavior (i.e. in terms of modal parameters) and the structural deformations of the building in the MM videos. The results by MM were compared for method validation to damage assessment obtained by the analyses of conventional accelerometers and high-precision optical markers tracked by a passive 3D motion capture system. Also, 3D laser scanning to obtain an accurate survey of the building geometry before and after the seismic tests was carried out. In particular, accelerometers were also processed and analyzed by using several stationary and non-stationary techniques with the aim to analyze the linear behavior of the undamaged structure and the nonlinear structural behavior during damaging shaking table tests. The proposed MM-based procedure provided accurate estimate of the main modal frequency and the damage location through the analysis of modal shapes, which were confirmed by advanced analyses of accelerometric data.

The deployment of Electro-Mechanical Actuators plays an important role towards the adoption of the More Electric Aircraft (MEA) philosophy. On the other hand, a seamless substitution of EMAs in place of more traditional hydraulic solutions is still set back due to the shortage of real-life and reliability data regarding their failure modes. One way to work around this problem is providing a capillary EMA Prognostics and Health Management (PHM) system, capable of recognizing failures before they actually undermine the ability of the safety-critical system to perform its functions. The authors have developed a model-based prognostic framework for PMSM based EMAs leveraging a metaheuristic algorithm: Evolutionary (Differential Evolution (DE)) and swarm intelligence (particle swarm (PSO), grey wolf (GWO)) methods are considered. Several failures (dry friction, backlash, short circuit, eccentricity and proportional gain) are simulated thanks to a Reference Model, acting as a Numerical Test Bench, then detected and identified thanks to the envisioned prognostic method, which leverages a low fidelity Monitoring Model. The employed algorithms showed good results and prove that this strategy could be executed in pre-flight checks or during the flight at specific time intervals, with positive impacts on system safety and availability.

Initial choice of Learning Rate is a key part of gradient based methods and has a great effect on the performance of the Deep Learning Model.This paper studies the behavior of multiple gradient based optimization algorithm which are commonly used in Deep Learning and compare their performance on various learning rate. As observed popular choice of optimization algorithms are highly sensitive to various choice of learning rates. Our goal is to find which optimizer has an edge over others for a specific setting. We look at two datasets namely MNIST and CIFAR10 for benchmarking. The results are quite surprising, and it will help us to choose a learning rate more efficiently.

Agent-based models (ABMs) are computational models for simulating the actions and interactions of autonomous agents in time and space. These models allow users to simulate the complex interactions between individual agents and the landscapes they inhabit and are increasingly used in epidemiology to understand complex phenomena and make predictions. However, as the complexity of the simulated systems increases, notably when disease control interventions are considered, model flexibility and processing speed can become limiting. Here we introduce SamPy, an open-source Python library for stochastic agent-based modeling of epidemics. SamPy is a modular toolkit for model development, providing adaptable modules that capture host movement, disease dynamics, and disease control interventions. Memory optimization and design provide high computational efficiency allowing modelling of large, spatially-explicit populations of agents over extensive geographical areas. In this article, we demonstrate the high flexibility and processing speed of this new library. The version of SamPy considered in this paper is available at https://github.com/sampy-project/sampy-paper .

Good estimators are characterized as robust, unbiased, efficient, and consistent. However, the commonly used estimators are weak or lack one or more of these properties. In this article, eight (8) estimators for statistical and geometrical estimations of symmetry/asymmetry, similarity/dissimilarity, identity/unidentity, and feature transformation were proposed following Kabirian-based optinalysis and other operations. The proposed estimators are characterized as invariant (robust) under scaling, location shift, and rotation or reflection. A computing code was written in python language for each of the proposed estimators so that peers can have working codes for application and performance evaluation.

Decision making as a result of system dynamics analysis requires, in practice, a straightforward and systematic modelling capability as well as a high-level of customisation and flexibility to adapt to situations and environments that may vary very much from each other. While in general terms a completely generic approach could be not as effective as ad-hoc solutions, the proper application of modern technology may facilitate agile strategies as a result of a smart combination of qualitative and quantitative aspects. In order to address such a complexity, we propose a knowledge-based approach that integrates the systematic computation of heterogeneous criteria with open semantics. The holistic understanding of the framework is described by a reference architecture and the proof-of-concept prototype developed can support high-level system analysis, as well as it suitable within a number of applications contexts - i.e. as a research/educational tool, communication framework, gamification and participatory modelling. Additionally, the knowledge-based philosophy, developed upon Semantic Web technology, increases the capability in terms of holistic knowledge building and re-use via interoperability. Last but not least, the framework is designed to constantly evolve in the next future, for instance by incorporating more advanced AI-powered features.

There is increasing interest in automating train operations of mainline services, e.g. to increase network capacity. Automatic train operation (ATO) is already achieved by several pilot projects, but not implemented on a large scale. Before the general introduction of new or adapted technologies can have a transformative effect on the operation of such a complex system as train operation on mainlines, they have to pass functional, interoperability and performance tests. A virtual preliminary analysis is one way to ensure a smooth as well as safe introduction and implementation. This paper aims to present an approach that applies to the performance testing of ATO systems. Therefore, methods and test standards for technologies enabling automatic operation in other transport sectors are reviewed. The main findings have been adapted, transformed and combined to be used as a general strategy for virtual performance testing in the railway sector. Specifically, universal performance indicators, namely punctuality, accuracy, energy consumption, safety and comfort, are presented. A layer model for scenario description is adapted from the automotive sector, as well as the definition of different scenario types. Lastly, factors that can influence the performance of an ATO algorithm are identified. To demonstrate the developed approach, a straightforward investigation of a case study is conducted using a microscopic train simulator in combination with an ATO algorithm.

Background: In an age where information is generally accessible, most of the interest these days has focused on how accessible and convenient technology can be. So small and personal, mobile devices can transform our perception of learning by combining both mobility and convenience. Mobile learning is part of the digital learning landscape alongside e-learning and serious games. However, knowledge about effective design of mobile learning experiences remains of interest with a focus on appropriate design models and the embodiments that can be implemented to achieve the intended educational outcomes. Exploring the instructor's perspective on mobile learning is essential. Therefore, the aim of this study was to investigate the Moroccan instructors' perception and practice of mobile learning to inform the development of an ecologically valid mobile learning integration model. Methods: Higher education Instructors (n=41) were recruited to the study. The Moroccan instructors' perception and their experiences regarding their adoption of mobile learning were collected using an online survey. The analysis focused on their mobile use, perceived IT competency, and opinions on mobile learning. Results: We described most of the instructors' considerations regarding integrating mobile technologies into their teaching activities. We found that most of the mobile learning activities defined by the respondents corresponded to relatively advanced use of mobile devices. More promising, instructors have found innovative ways to use the educational potential of mobile devices. However, the prospect of mobile devices was still to challenge. No or poor Wi-Fi connection, number of devices or limited access, sometimes fees or applications incompatibility were identified as reasons and obstacles to mobile learning usage. Conclusion: Mobile learning is mostly perceived positively among Moroccan instructors allowing many applications and usage to enhance teaching and learning. In this study, a better understanding of aspects and factors influencing the integration of mobile learning in the Moroccan educational context is exposed, helping further the development of an ecologically valid mobile learning integration model. Future work on mobile learning should consider the highly paced evolution of mobile technologies, emphasizing the flexibility of integration frameworks to support instructors and learners.

Gender-based violence is considered a serious social and public health problem. Overcoming this situation implies a process that results in the favorable biopsychosocial rehabilitation, the resilient of women. The objective of this study was to analyze the tools, resources and personal and psychosocial mechanisms used by women survivors of gender-based violence. The design was an interpretative phenomenology. It carried out with 22 women who have overcome gender-based violence. Data was collected through personal interviews and narration. The results were grouped into four themes: "Process of violence", "Social resources for coping and overcoming GBV", "Personal tools for coping and overcoming GBV", and "Feelings identified, from the abuse stage to the survival stage". Several studies concluded that overcoming abuse is influenced by the women social network, and it can be the action of these people determining their survival to gender violence. Despite the recognized usefulness of these available resources, it would be desirable to strengthen them in order to be able to drive more women toward survival, assuming a strengthening of coping and overcoming, without forgetting the importance of other support mechanisms such as their family and group therapies.

Malnutrition in children is a global health problem, particularly in developing countries. The effects of an insufficient supply of nutrients on body composition and physiological functions may have implications for drug disposition and ultimately affect the clinical outcome in this vulnerable population. Physiologically based pharmacokinetic (PBPK) modeling can be used to predict the effect of malnutrition as it links physiological changes to pharmacokinetic (PK) consequences. However, the absence of detailed information on body composition and the limited availability of controlled clinical trials in malnourished children complicates the establishment and evaluation of a generic PBPK model in this population. In this manuscript we describe the creation of physiologically-based bridge to a malnourished pediatric population, by combining information on a) the differences in body composition between healthy and malnourished adults and b) the differences in physiology between healthy adults and children. Model performance was confirmed using clinical reference data. This study presents a physiologically-based translational framework for prediction of drug disposition in malnourished children. The model is readily applicable for dose recommendation strategies to address the urgent medicinal needs of this vulnerable population.

This work presents the development and implementation of a distributed navigation system based on computer vision. The autonomous system consists of a wheeled mobile robot with an integrated colour camera. The robot navigates through a laboratory scenario where the track and several traffic signals must be detected and recognized by using the images acquired with its on-board camera. The images are sent to a computer server that processes them and calculates the corresponding speeds of the robot using a cascade of trained classifiers. These speeds are sent back to the robot, which acts to carry out the corresponding manoeuvre. The classifier cascade should be trained before experimentation with two sets of positive and negative images. The number of images in these sets should be considered to limit the training stage time and avoid overtraining the system.

Has anyone ever missed an event because he was confused in days and dates? Do we remember the date of any day without looking at a calendar? Is the current Gregorian Calendar efficient enough for use, and does it facilitate our life or make it more complicated? Have you ever thought about a much simpler way to calculate days and dates in a year? All these questions are answered in this paper, in which the author proposes original optimization algorithm that creates optimal perennial calendars. Results show that there is more than one way to create a perennial calendar, in which the number of days in each month does not change, neither the dates. Hence, all months have the same sequence of days and dates. In other meaning, Monday becomes the first day of every month, and Sunday becomes the last day. Consequently, the calendars become much easier to memorize and very simple to predict the days and dates in any year.

Paper-based sensors, microfluidic platforms and electronic devices have attracted attention in the past couple of decades because they are flexible, can be recycled easily, environmentally friendly, and inexpensive. Here we report a paper aptamer-based potentiometric sensor to detect the whole Zika virus for the first time with a minimum sensitivity of 2.6 nV/Zika and the minimum detectable signal (MDS) of 0.8x1e6 Zika. Our paper sensor works very similar to a P-N junction where a junction is formed between two different wet regions with different electrochemical potentials near each other on the paper. These two regions with slightly different ionic contents, ionic species and concentrations, produce a potential difference given by the Nernst equation. Our paper sensor consisted of a 2-3 mm x 10 mm segments of a paper with a conducting silver paint contact patches on its two ends. The paper is soaked in a buffer solution containing aptamers designed to bind to the capsid proteins on Zika. Atomic force microscopy studies were carried out to show both the aptamer and Zika become immobilized in the paper. We then added the Zika (in its own buffer or simulant Urine) to the region close to one of the silver-paint contacts. The Zika virus (40 nm diameter with 43 kDa or 7.1x10-20 gm weight), became immobilized in the paper’s pores and bonded with the resident aptamers creating a concentration gradient. The potential measured between the two silver paint contacts reproducibly became more negative as upon adding the Zika. We also showed that an LCD powered by the sensor, can be used to detect the sensor output.

Paper-based sensors, microfluidic platforms and electronic devices have attracted attention in the past couple of decades because they are flexible, can be recycled easily, environmentally friendly, and inexpensive. Here we report a paper aptamer-based potentiometric sensor to detect the whole Zika virus for the first time with a minimum sensitivity of 2.6 nV/Zika and the minimum detectable signal (MDS) of 1.2x10⁶ Zika. Our paper sensor works very similar to a P-N junction where a junction is formed between two different wet regions with different electrochemical potentials near each other on the paper. These two regions with slightly different ionic contents, ionic species and concentrations, produce a potential difference given by the Nernst equation. Our paper sensor consisted of a 2-3 mm x 10 mm segments of a paper with a conducting silver paint contact patches on its two ends. The paper is soaked in a buffer solution containing aptamers designed to bind to the capsid proteins on Zika. Atomic force microscopy studies were carried out to show both the aptamer and Zika become immobilized in the paper. We then added the Zika (in its own buffer) to the region close to one of the silver-paint contacts. The Zika virus (40 nm diameter with 43 kDa or 7.1x10^-20 gm weight), became immobilized in the paper’s pores and bonded with the resident aptamers creating a concentration gradient. The potential measured between the two silver paint contacts reproducibly became more negative as upon adding the Zika. We also showed that an LCD powered by the sensor, can be used to detect the sensor output.

Many physiotherapy treatments begin with a diagnosis process. The patient describes symptoms, upon which the physiotherapist decides which tests to perform until a final diagnosis is reached. The relationships between the anatomical components are too complex to keep in mind and the possible actions are abundant. A trainee physiotherapist with little experience naively applies multiple tests to reach the root cause of the symptoms, which is a highly inefficient process. This work proposes to assist students in this challenge by presenting three main contributions: (1) A compilation of the neuromuscular system as components of a system in a Model-Based Diagnosis problem; (2) The PhysIt is an AI-based tool that enables an interactive visualization and diagnosis to assist trainee physiotherapists; and (3) An empirical evaluation that comprehends performance analysis and a user study. The performance analysis is based on evaluation of simulated cases and common scenarios taken from anatomy exams. The user study evaluates the efficacy of the system to assist students in the beginning of the clinical studies. The results show that our system significantly decreases the number of candidate diagnoses, without discarding the correct diagnosis, and that students in their clinical studies find PhysIt helpful in the diagnosis process.

This study proposes a new algorithm termed rain cell identification and tracking (RCIT) to identify and track rain cells from high resolution weather radar data. Previous algorithms have limitations when tracking non-consequent rain cells owing to their use of maximum correlation coefficient methods and their lack of an alternative way to handle the variation stages of rain cells during their life cycles. To address these deficiencies, various methods are implemented in the new algorithm. These include the particle image velocimetry (PIV) method for motion estimation and the rain cell matching rule to obtain the stage changes of rain cells. High resolution (5-min and 1-km) radar reflectivity data from three rainy days over the German federal state North Rhine Westphalia (NRW) are used to evaluate the proposed algorithm. The performance of the new algorithm is compared with a radar reflectivity map and verified by two object-oriented methods: structure–amplitude–location (SAL) and geometric index. The verification results suggest that the performance of the new algorithm is good. Application of the RCIT algorithm to the selected cases shows that the inner structure of rainfall events in the experimental region present extreme value distributions, with most rainfall events having a short duration with less intensity. The new algorithm can effectively capture the stage changes of rain cells during their life cycles. The proposed algorithm can serve as the basis for further hydro-meteorological applications such as spatial and temporal analysis of rainfall events and short-term flood forecasting.

The quadruple burden of diseases, early discharge from hospital and hospital at home have resulted in home-based care services becoming a requirement in South Africa. The home-based care services generate a significant amount of health care risk waste that is mismanaged. However, more attention is given to the health care risk waste generated in hospitals and clinics than to health care risk waste generated by home-based caregivers. Therefore, this study investigates the health care risk waste management practices by home-based caregivers. The study adopted a mixed research approach, qualitative and quantitative methods, using a literature review, interviews, and questionnaires as means of data collection. Results show that there are different types of health care risk waste generated as a result of different activities performed by home-based caregivers, but that the waste was found to be managed in an unsafe manner. The majority of households receiving home-based care did not have basic sanitation facilities such as toilets, running water and waste removal services, aggravating the issue of health care risk waste mismanagement. The study recommends a new policy framework that will lead to safe management practices of generated health care risk waste to be adopted by home-based caregivers.

The application of graph theory in chemical and molecular structure research far exceeds people's expectations, and it has recently grown exponentially. In the molecular graph, atoms are represented by vertices and bonded by edges. Closed forms of multiplicative degree-based topological indices which are numerical parameters of the structure and determine physico-chemical properties of the concerned molecular compound. In this article, we compute and analyze many multiplicative degree-based topological indices of silicon-carbon Si₂C₃-I[p,q] and Si₂C₃-II[p,q].

Recent discovery of triangular boron Nanotubes makes it a competitor of carbon in many respects. Closed forms of M-polynomial of nanotubes produce closed forms of many degree-based topological indices which are numerical parameters of the structure and, in combination, determine properties of the concerned nanotubes. In this report, we give M-polynomials of triangular boron nanotubes and recover many important topological degree-based indices of these nanotubes. We also plot surfaces associated to these nanotubes.

The land use land cover (LULC) map is extensively employed for different purposes. The LULC maps provided by the Portuguese National Geographic Information System (SNIG) are not ideal for continuous assessment and regular scrutiny. Machine learning (ML) algorithms applied in remote sensing (RS) data has been proven effective in image classification, object detection, and semantic segmentation. Previous studies have shown that Random Forest (RF) and Support Vector Machine (SVM) consistently achieved high accuracy for land classification. In this study, the application of RF and SVM classifiers, and object-based (OBIA) and pixel-based (PBIA) approaches with Sentinel-2A imagery was evaluated using Google Earth Engine (GEE) platform for land cover classification of a burned area in the Serra da Estrela Natural Park (PNSE), Portugal. This aimed to detect the land cover change and closely observe the burned area and vegetation recovery after the 2022 wildfire. The combination of RF and OBIA achieved the highest accuracy in all evaluation metrics. At the same time, a comparison with the Normalized Difference Vegetation Index (NDVI) map and Conjunctural Land Occupation Map (COSc) of 2023 year indicated that the SVM and PBIA map resembled the maps better.

In this study, a novel method is proposed to estimate surface-spectral reflectance from camera responses that combines model-based and training-based approaches. An imaging system is modeled using the spectral sensitivity functions of an RGB camera, spectral power distributions of multiple light sources, unknown surface-spectral reflectance, additive noise, and a gain parameter. The estimation procedure comprises two main stages: (1) selecting the local optimal reflectance dataset from a reflectance database and (2) determining the best estimate by applying a neural network to the local optimal dataset only. In stage (1), the camera responses are predicted for the respective reflectances in the database, and the optimal candidates are selected in the order of lowest prediction error. In stage (2), most reflectance training data are obtained by a convex linear combination of local optimal data using weighting coefficients based on random numbers. A feed-forward neural network with one hidden layer is used to map the observation space onto the spectral reflectance space. In addition, the reflectance estimation is repeated by generating multiple sets of random numbers, and the median of a set of estimated reflectances is determined as the final estimate of the reflectance. Experimental results show that the estimation accuracies exceed those of other methods.

Undernutrition and micronutrient deficiencies such as anemia are considered significant public health challenges in Bangladesh, which enhancing fish consumption is a well-established food-based intervention to address these. This paper documents the establishment of community-based fish chutney production and reports the impact of its consumption on mid-upper arm circumference (MUAC) and hemoglobin (Hb) levels among targeted 150 pregnant and lactating women (PLW) in rural Bangladesh. A fish chutney was developed using locally available ingredients followed by a series of laboratory tests, including nutrient composition, shelf-life and food safety. A community-based fish chutney production process was designed to: 1) supply locally available ingredients for processing; 2) establish two fish drying sites; 3) initiate a community-based production site, and 4) distribute fish chutney to PLW by six women nutrition field facilitators for one year. Then a pre- and post-intervention study was designed for a selected 150 PLW to receive 30g of fish chutney daily for 12 months. Differences in mean mid-upper arm circumference (MUAC) and hemoglobin (Hb) levels pre- and post-consumption were analyzed using one-way analysis of variance. Consumption of 30g of fish-chutney resulted in significant increases of the mean values of Hb levels and MUAC among the targeted PLW.

Grass pea (Lathyrus sativus L.) is a nutritious legume crop well-adapted to fragile agro-ecosystems that can survive under challenging climatic conditions. The cultivation of grass pea faces stigma primarily due to the presence of β-N-Oxalyl-l-α, β-diaminopropionic Acid (β-ODAP), which is associated with a risk of inducing neurolathyrism upon prolonged consumption of its grains as a staple diet. The grass pea improvement program of International Center for Agricultural Research in the Dry Areas (ICARDA) aims to reduce β-ODAP content to a safe level along with improving yield potential and nutritional quality of grass pea. In this study, 183 germplasm accessions representing 13 different Lathyrus species and 11 L. sativus breeding lines were evaluated for β-ODAP content based on Rao protocol and mineral concentration using ICP-OES. Significant variability was observed among the accessions for the studied traits. The results showed low β-ODAP content and high mineral concentration in 25 accessions of crop wild relatives (CWR) which included L. cicera, L. ochrus and L. cassius with one accession IG65277 of L. cassius, in addition to two lines IG117034 and ACC1335 of L. sativus having very low ODAP content. Furthermore, some accessions of L. pseudocicera, L. aphaca, L. cicera, L. marmoratus, L. gorgoni and L. tingitanus also showed low β-ODAP content. The results showed significant positive correlations between different trait combinations viz., K and P (r =0.193***), K and Fe (r =0.177***), Mn and Fe (r = 0.210***), Mn and Se (r = 0.137***), ODAP and Mg (r = 0.158**), and ODAP and Ca (r = 0.140**). L. cicera, L. ochrus, and L. cassius were identified as a great source for improving the mineral concentration and reducing ODAP content in the cultivated grass pea.

Tussilago farfara L. is a traditional medicinal plant valued for its potentially health-promoting metabolites. Its herbal raw material has been recognized and used since ancient times and continues to be widely used in traditional medicine. Introducing these plants to in vitro cultivation is a challenging task, but once the protocol is developed, such cultures can provide an abundant and inexhaustible source of plant material. In this study, we report the successful induction and growth of vigorous T. farfara L. callus in vitro. Callus induction was achieved on solid media in darkness, whereas it appeared inefficient under light conditions and in suspension culture. We present a detailed description of callus growth kinetics, morphological analysis, photosynthetic activity and biochemical parameters (including protein content and photosynthetic pigments) supported by histological studies. Furthermore, we observed potential for organogenesis and somatic embryogenesis. This method for in vitro propagation of T. farfara, along with callus culture maintenance, offers a wide range of applications in pharmacy and could benefit the environment by minimizing the depletion of natural populations of this species.

In 2004, a significant portion of the spruce-dominated forests in the Tatra National Park (northern Slovakia) was destroyed by an exceptionally strong windstorm. Our study focused on the status of deadwood and its influence on post-disturbance forest regeneration 18 years after the destruction. Since some disturbed areas were salvaged and others were not, we could compare the situations between these two management approaches. In total, 40 research sites (20 salvaged and 20 unsalvaged) were measured, each represented by four satellite-like plots with a radius of 4 m. We measured the diameters of deadwood and its decay status (classes 1 – 5). At the same time, we recorded the sizes (stem base diameter and height) and species of young trees. The results showed that while salvage conditions and contact with soil stimulated deadwood decomposition, the diameter of logs was not a significant factor. The highest decay class (3.83) was found in deadwood on salvaged areas and attached to the soil, while the lowest decay class (3.10) was found in deadwood on unsalvaged areas and in the case of logs unattached to the soil. While carbon content (based on percentage of wood mass) did not change with decay class, wood density decreased sharply with decay class. Water moisture showed an increasing tendency with decay class. Moreover, our results showed that post-disturbance management influenced forest regeneration. Significantly higher tree diversity was observed in salvaged areas (5.40 species per plot) compared to unsalvaged areas (3.85 species per plot). While areas with logging were predominantly covered by broadleaved species, those without logging were typically dominated by Norway spruce (Picea abies L. Karst). We concluded that although salvage logging decreased the total carbon and water content in deadwood, it can stimulate tree species diversity. Thus, the currently prevailing opinion about the exclusively negative ecological effects of salvage logging should be accepted with caution, and local conditions must be considered before making broad judgments.

The mechanical properties of the materials stored inside agricultural silos influence the loads generated inside them. The different silo calculation methodologies allow predicting these loads under static and dynamic conditions if the mechanical properties of the stored materials are known. It has been known for many years that these properties are highly dependent on the moisture content of the material. However, to date there are not many studies focused on its determination. The goal of this research is the determination of the angle of internal friction, apparent cohesion, dilatancy angle and apparent specific weight of maize subjected to different moisture contents. Direct shear and oedometer assay devices were used for this purpose. In addition, the maize samples used were moistened using a climatic chamber. Moisture contents applied to maize sample ranged from 9.3% to 17.4%. The results obtained for the angle of internal friction and apparent cohesion, as well as those obtained for the apparent specific weight, were similar to those reported in the literature. However, the values obtained for the dilatancy angle of maize as a function of moisture content could not be compared because nothing has been published so far. The values obtained for this parameter overlap with those published for this material under ambient conditions. In addition, no direct relationship between the values obtained for this parameter and the moisture content of the sample could be found. Finally, the apparent specific weight increased with increasing moisture content of the samples, which differed from that published in the literature. The values provided here can be used for the optimization of storage and handling structures for granular agricultural materials using numerical methods.

This paper introduces a new routing and touring service both for outdoor and indoor places of touristic and cultural interest designed to be used in the wider area of ​​Attica, Greece. This service is the result of the work done in OPTORER project and it aspires to offer a range of innovative and thematic routes to several specified points of interest in the selected area of Attica, encouraging the combination of indoors and outdoors routes in a single tour. The aim is to optimize the user experience while promoting specific, user-centric features with safety and social welfare being a priority for every designed tour resulting in enhancing the touristic experience in the area. Using a common smartphone device, as well as common wearable devices (i.e., smartwatches), the OPTORER service will provide an end-to-end solution by developing the algorithms and end-user applications, together with an orchestration platform responsible for managing, operating and executing the service that produces and presents to the end user results derived from solving dynamically complex optimization problems.

The loads generated inside agricultural silos under static and dynamic conditions depend on the mechanical properties of the materials stored inside them. The silo calculation methodologies are based on these mechanical properties. Although it is known that moisture content greatly influences the values reached by these mechanical properties, just few studies have been conducted to determine them. The present work determines the angle of internal friction, the apparent cohesion, the dilatancy angle and the apparent specific weight of wheat when subjected to different moisture contents. Direct shear and oedometer assay devices were used. In addition, a climatic chamber was used to moisten the wheat samples used in this work. The moisture content applied to the samples ranged from 7.5% to 15.5%. From the different assays carried out it could be observed that the values of the angle of internal friction and apparent cohesion obtained from direct shear assays, as well as those related to the apparent specific weight obtained from oedometer assays were like those found in the literature. The apparent specific weight increased as moisture content increased, reaching a peak value at a moisture content of 13.4%, followed by a drop at a moisture content of 15.5%. The values here provided can be used in silo load calculations involving numerical methods.

The work of this paper presents multiple novel findings from a comprehensive analysis of about 150,000 tweets about exoskeletons posted between May 2017 and May 2023. First, findings from content analysis and temporal analysis of these tweets reveal the specific months per year when a significantly higher volume of Tweets was posted and the time windows when the highest number of tweets, the lowest number of tweets, tweets with the highest number of hashtags, and tweets with the highest number of user mentions were posted. Second, the paper shows that there are statistically significant correlations between the number of tweets posted per hour and different characteristics of these tweets. Third, the paper presents a multiple linear regression model to predict the number of tweets posted per hour in terms of these characteristics of tweets. The R2 score of this model was observed to be 0.9540. Fourth, the paper reports that the 10 most popular hashtags were #exoskeleton, #robotics, #iot, #technology, #tech #innovation, #ai, #sci, #construction and #news. Fifth, sentiment analysis of these tweets was performed using VADER and the DistilRoBERTa-base library. The results show that the percentage of positive, neutral, and negative tweets were 46.8%, 33.1%, and 20.1%, respectively. The results also show that in the tweets that did not express a neutral sentiment, the sentiment of surprise was the most common sentiment. It was followed by the sentiments of joy, disgust, sadness, fear, and anger. Furthermore, analysis of hashtag-specific sentiments revealed several novel insights, for instance, for almost all the months in 2022, the usage of #ai in tweets about exoskeletons was mainly associated with a positive sentiment. Sixth, text processing-based approaches were used to detect possibly sarcastic tweets and tweets that contained news. Finally, a comparison of positive tweets, negative tweets, neutral tweets, possibly sarcastic tweets, and tweets that contained news, in terms of different characteristic properties of these tweets are presented. The findings reveal multiple novel insights, for instance, the average number of hashtags used in tweets that contained news has considerably increased since January 2022.

Ecological information of invasive alien species are crucial for their effective management. How-ever, they are often lacking in newly invaded ecosystems. This is the case of the European catfish Silurus glanis L. in Lake Maggiore where the species is present since 1990 but no scientific infor-mation are available on its ecology. To start filling this knowledge gap, 236 catfish (67 cm to 150 cm of total length) were collected, measured, and dissected for stomach content analyses from three localities and in two habitats (littoral vs. pelagic) in late autumn/early winter. NPUE and BPUE (individuals and biomass (g) per unit effort (m2)) of catfish was generally higher in littoral (NPUE > 0.01; BPUE > 96) than pelagic habitats (NPUE < 0.009; BPUE < 114) but catfish had, on average, larger sizes in pelagic habitats. Overall, 581 individual prey items were recorded belonging to12 taxa. Pelagic catfish specialized their diet exclusively on three prey fish (coregonids, shad and roach) whilst the diet of littoral catfish was more variable, and was dominated by crayfish, perch, and roach. These results highlighted for the first time the interaction of larger catfish with the lake’s pelagic food web, and thus possible consequences are discussed, including the potential contrasting role S. glanis may have for the lake’s fishery.

Surface soil moisture (SSM) is a significant factor affecting crop growth. This paper presents a method for retrieving SSM over wheat-covered areas using synergy dual-polarization C-band Sentinel-1 synthetic aperture radar and Sentinel-2 optical data. Firstly, a modified water cloud model (WCM) was proposed to remove the influence of vegetation from the backscattering coefficient of the radar data. The vegetation fraction was then introduced in this WCM, and the vegetation water content (VWC) was calculated using multiple linear regression model. Subsequently, the support vector regression technique was used to retrieve the SSM. This approach was validated using in-situ measurements of the wheat field in Hebi, in the north of Henan Province. The key findings of this study are as follows: (1) Based on vegetation indices obtained from Sentinel-2; the proposed VWC estimation model can effectively eliminate the influence of vegetation; (2) compared with vertical transmit and horizontal receive polarization, vertical transmit and vertical receive polarization is better for detecting changes in SSM at different growth stages of wheat; and, (3) the validation results indicated that the proposed approach, based on Sentinel-1 and Sentinel-2 data, successfully retrieved SSM in the study area.

The responses of the aromatic and medicinal plant Salvia sclarea (clary sage) to 900 µM Zn exposure for 8 days in a hydroponic culture were investigated. The tolerance mechanisms under excess Zn exposure were assessed by changes in nutrient uptake, photosynthetic characteristics and leaf structure. The uptake and the distribution of Zn, as well as some essential nutrient elements such as: Ca, Mg, Fe, Mn and Cu, were examined by inductively coupled plasma mass spectrometry (ICP-MS). The results revealed that Salvia sclarea is a Zn accumulator plant that tolerates significantly high toxic levels of Zn in the leaves by increasing the leaf content of Fe, Ca and Mn ions to protect the photosynthetic function and even stimulate photosystem I (PSI) and photosystem II (PSII) activities. Additionally, the leaf photosynthetic pigments and the total phenolic and anthocyanin content were also studied. Data showed that the exposure to excess Zn significantly increases the synthesis of phenolic compounds in the leaves which plays an important role in the Zn detoxification and protection against oxidative stress. Lipid peroxidation and electrolyte leakage in leaves used as clear indicators for heavy metal damage were slightly increased. All these data highlight that Salvia sclarea is an economically interesting plant for phytoextraction and/or phytostabilization of Zn contaminated soils.

Nanotechnology has enabled the development of novel therapeutic strategies such as targeted nanodrug delivery systems, control and stimulus-responsive release mechanisms, and the production of theranostic agents. As a prerequisite for the use of nanoparticles as drug delivery systems, the amount of loaded drug must be precisely quantified, a task for which two approaches are currently used. However, both approaches suffer from the inefficiencies of drug extraction and of the solid-liquid separation process, as well as from dilution errors. This work describes a new, reliable, and simple method for direct drug quantification in polymeric nanoparticles using attenuated total reflection Fourier transform infrared spectroscopy, which can be adapted for a wide variety of drug delivery systems. Silk fibroin nanoparticles and naringenin were used as model polymeric nanoparticle carrier and drug, respectively. The specificity, linearity, detection limit, precision and accuracy of the spectroscopic approach were determined in order to validate the method. A good linear relation was observed within 0.00 to 7.89 % of naringenin relative mass with an R2 of 0.973. The accuracy was determined by the spike and recovery method. Results showed an average 104% recovery. The limit of detection and limit of quantification of the drug loading content were determined to be 0.3 and 1.0 %, respectively. The method's robustness is demonstrated by the notable similarities between the calibrations carried out in two different equipment and institutions.

Objective: Lipids are secreted into milk as bilayer-coated structures: milk lipid globules (MLGs). Adipophilin (ADRP) and perilipin 3 (TIP47) are associated with MLGs in human breast milk; however, the role of these proteins in milk lipid secretion is not fully understood. The aim of the study was to investigate levels of ADRP, TIP47 and total lipid content in human breast milk, their mutual correlations and dynamics during lactation. Research Methods & Procedures: Milk samples from 22 healthy lactating women (Caucasian, Central European) were collected at five time points during lactation (1–3, 12–14, 29–30, 88–90 and 178–180 days postpartum). Mass spectrometry-based method was used for quantification of ADRP and TIP47 in the samples. The gravimetric method was used to determine milk total lipid content. Results: We observed distinctive trends in ADRP, TIP47 levels and lipid content in human breast milk during the first 6 months of lactation. We also found a significant association between lipid content and ADRP, lipid content and TIP47, and ADRP and TIP47 concentrations in breast milk at all sampling points. Moreover, we derived an equation for estimating the mean lipid content of milk based on ADRP concentration in human breast milk. Conclusions: A mass spectrometry-based method was developed for quantifying ADRP and TIP47 in human breast milk. Strong mutual correlations were found between ADRP, TIP47 and total lipid content in human breast milk.

Alternative fuels available at low cost, friendly to natural environments and meet the energy needs and demands, have witnessed a growing demand and use today. Ethanol is an attractive renewable energy source with a high content of oxygen. Ethanol can be produced through ethanolisis, however for this work direct blending of conventional diesel, waste plastic pyrolysis oil and ethanol with commercial fuel improver CI-0808 purchased from Innospec company was attempted. The primary purpose of adding a cetane improver was to improve the combustion characteristics of the blends by at least 1- 3 ignition quality points. Five mixing ratios were chosen in the following order, 50:25:25, 60: 20:20, 70: 15:15, 80: 10:10 and 90: 5:5 for Waste Plastic Pyrolysis Oil (WPPO), ethanol and conventional diesel (CD) respectively. However, for the fuel additive mixing ratio the total volume percentage was considered and the ratio put at 0.01% of the total quantity of blended fuel. In this work WPPO, diesel blends and fuel additives improvers were used as alternative fuel. This was to evaluate their performance and emission characteristics in a stationary single cylinder water cooled experimental diesel engine. The CI-0808 was added due to its potential power to reduce emissions of CO, UHC, NO_X, PM and improved engine performance. The results obtained were compared carefully to ASTM standards and discussed using graph curves figures and tabulated values. The conclusion was that ethanol and WPPO blends can be used in diesel engines as alternative fuel without modification. Used in combination with cetane improvers the emissions reduce significantly and performance improved equalling that of conventional diesel fuel.

This paper presents an approach to the application of the Model-Based Systems Engineering (MBSE) and Model-Based Systems Architecting (MBSA) principles to develop a Model-Based Pattern Language (MBPL). It takes too long for systems engineers and architects to develop a new system from scratch, particularly new space-based systems derived from the existing space systems architectures. A pattern language is a holistic view of reusable logical model artifacts; many are interdisciplinary and introductory, if at all. The results are mostly a combination of the application-specific logical solution, which further results in the best possible overall solution. The main benefit of the pattern language is reducing the time and validation required to generate a new space-based system architecture; this approach will develop top-level requirements in the initial phase of the system development. The rationale of the methodology proposed by the paper is as follows, collect, and decompose published literature and other open-source information available on space system architectures and system models; develop SysML models for systems, subsystems, products, assembly, subassembly level, and mission-specific requirements using CAMEO SysML software. Arrange these patterns to develop a functional ontology and construct a logical architecture pattern library. This approach created, updated, and managed SysML pattern language, which evaluated the expedited new model construction. Again, our objective is to develop a logical pattern language using public domain information and evaluate patterns by constructing a new space mission concept—for example, planetary surface habitat.

The development of plant-based meat analogues has become a significant challenge for the food industry in recent years due to the increasing demand for sustainable and healthier proteins in the context of a global protein transition. Plant-based meat analogues imitate the visual, textural, and chemical properties of traditional meat products and are required to closely resemble meat to appeal to consumers. In addition, consumers demand natural, clean-label, and nutritional and healthy products. To address these challenges, the food industry must develop highly healthy, nutritious, and E-number-free meat analogue products. Understanding the functionality of each ingredient and its role in the food matrix is crucial to being a key player in the innovation of the meat analogues market. This review provides updated information on the primary ingredients utilized for the development of plant-based burger meat alternatives and their functionality. The key components of meat analogue burgers are outlined, including plant proteins, binding agents, fats and oils, flavorings, colorings, preservatives, fortificants, and clean-label considerations.

This paper presents the PEnsemble 4 model, a sophisticated machine learning framework that integrates IoT-based environmental data to accurately forecast maize yield. With the projected significant growth in global maize demand over the next decade, the inherent risks posed by the crop’s dependence on weather conditions necessitate improved prediction capabilities. The PEnsemble 4 model, developed with high accuracy, incorporates comprehensive datasets encompassing soil attributes, nutrient composition, weather conditions, and UAV-captured vegetation imagery. By employing a combination of Huber and M estimates, the PEnsemble 4 model effectively analyzes temporal patterns in vegetation indices, specifically CIre and NDRE, which serve as reliable indicators of canopy density and plant height. In addition, this research significantly contributes to precision agriculture by offering an efficient and sustainable alternative to conventional farming practices through precise yield predictions. Notably, the PEnsemble 4 model enables earlier estimation, advancing the timeline for yield prediction from the conventional day 100 in the R6 stage to day 79 in the R2 stage. This improvement enhances decision-making processes in farming operations. The remarkable accuracy rate of 91% underscores the importance of adopting a multifaceted data approach that harnesses IoT-derived environmental insights. Additionally, the PEnsemble 4 model extends its benefits beyond yield prediction, facilitating the detection of water and crop stress, as well as disease monitoring in broader agricultural contexts. Ultimately, the PEnsemble 4 model establishes a new standard in maize yield prediction, revolutionizing crop management and protection through the synergistic utilization of IoT and machine learning technologies.

Many complex behaviours in biological systems emerge from large populations of interacting molecules or cells, generating functions that go beyond the capabilities of the individual parts. Such collective phenomena are of great interest to bioengineers due to their robustness and scalability. However, engineering emergent collective functions is difficult because they arise as a consequence of complex multi-level feedback, which often spans multiple length-scales. Here, we present a perspective on how some of these challenges could be overcome by using multi-agent modelling as a design framework within synthetic biology. Using case studies covering the construction of synthetic ecologies to biological computation and synthetic cellularity, we show how multi-agent modelling can capture the core features of complex multi-scale systems and provide novel insights into the underlying mechanisms which guide emergent functionalities across scales. The ability to unravel design rules underpinning these behaviours offers a means to take synthetic biology beyond single molecules or cells and towards the creation of systems with functions that can only emerge from collectives at multiple scales.

A single Information security is of pivotal concern for consistently streaming information over the widespread internetwork. The bottleneck flow of incoming and outgoing data traffic introduces the issue of malicious activities taken place by intruders, hackers and attackers in the form of authenticity desecration, gridlocking data traffic, vandalizing data and crashing the established network. The issue of emerging suspicious activities is managed by the domain of Intrusion Detection Systems (IDS). The IDS consistently monitors the network for identifica-tion of suspicious activities and generates alarm and indication in presence of malicious threats and worms. The performance of IDS is improved by using different signature based machine learning algorithms. In this paper, the performance of IDS model is determined using hybridization of nestrov-accelerated adaptive moment estimation –stochastic gradient descent (HNADAM-SDG) algorithm. The performance of the algorithm is compared with other classi-fication algorithms as logistic regression, ridge classifier and ensemble algorithm by adapting feature selection and optimization techniques

Generative AI chatbots have emerged as a significant scientific contribution. They can produce text, images, audio, and video, and their applications are vast and varied in every field. However, it is identified that these chatbots can be used by script kiddies and malicious actors to generate phishing emails, security exploits, and executable payloads that can present notable risks and challenges for cybersecurity. This research provides an extensive review of the current status of the three most popular generative AI chatbots which are ChatGPT, Google Gemini, and Microsoft Bing. The article further reviews the different ways in which an attacker can intentionally use a chatbot for malicious activities and intensify cyber attacks. Moreover, the article provides insights on how an attacker uses certain keyword queries to manipulate chatbot behavior and tricks it into generating content that I won’t otherwise. We also explored the role of AI chatbots in enhancing cyber resilience against sophisticated attacks and their applications in detecting and mitigating security incidents. Finally, we proposed strategies that can empower modern chatbots to defend against such threats so that an attacker will not be able to bypass their content filtering mechanisms.

This research paper examines the transformative impact of Artificial Intelligence (AI) on the global journalism industry. The integration of AI technologies, such as machine learning and natural language processing, has drastically changed journalistic practices and media operations. The study aims to understand how AI affects news production, distribution, and ethical considerations within journalism. By providing historical context and reviewing existing literature, this paper situates its analysis within the broader academic discourse. A mixed-methods approach is used for data collection and analysis, ensuring comprehensive and reliable findings. Results indicate that AI tools enhance journalistic efficiency and capabilities but also introduce challenges related to accuracy, authenticity, and editorial judgment. The implications for employment in journalism are significant, necessitating new skills and roles. The discussion interprets these findings in the context of media evolution and ethical standards. This study concludes by advocating for a balanced approach to AI adoption in journalism, emphasizing the importance of ethical guidelines, continuous journalist training, and ongoing research to navigate this evolving landscape.

Retrogressive thaw slumps (RTSs) are becoming more common on the Qinghai-Tibet Plateau as permafrost thaws, but the hydraulic characteristics of these slumps have not been extensively studied. To fill this knowledge gap, we used the ''space-for-time substitution method'' to differentiate three stages of RTSs: original grassland, collapsing, and collapsed. Our study included on-site investigations, measurements, and simulated analyses of soil water characteristics, environmental factors, and hydrological properties. Our findings show that the measurements and simulated analyses of soil water characteristics were highly consistent across RTSs, indicating the accuracy of the V-G model in reproducing soil hydraulic parameters for different stages of RTSs. The original grassland stage had the highest soil water retention and content due to its high SOM content and fine-textured micropores. In contrast, the collapsed stage had higher soil water retention and content compared to the collapsing stage, primarily due to increased proportions of soil micropores, SOM content, and lower bulk density (BD). Freeze-thaw cycles had a significant impact on the soil texture and structure of RTSs, resulting in a decrease in SOM content and an increase in BD. However, the absence of soil structure and compaction led to the subsequent accumulation of organic matter, increasing SOM content. Changes in field capacity (FC), permanent wilting point (PWP), and soil micropore distribution aligned with variations in SOM content and water content.These findings highlight the importance of managing SOM content and water content to mitigate the adverse effects of freeze-thaw cycles on soil structure and stability at different stages of RTSs. Effective management strategies may include incorporating organic matter, reducing soil compaction, and maintaining optimal water content. Further research is needed to determine the most suitable management practices for different soil types and environmental conditions.

In air-breathing proton exchange membrane fuel cells (Air PEM FCs), high rate of water evaporation from the cathode might influence the resistance of the membrane electrode assembly (MEA), which is highly dependent on the water content of the Nafion membrane. We propose a dead-end hydrogen anode as a means of intermediate storage of water/humidity for self-humidification of the membrane. Such inflatable bag integrated with the PEM FC has a potential in blimp applications for anode self-humidification. A dynamic numerical water balance model, validated by experimental measurements, is derived to predict the effect of MEA configuration, membrane’s hydration state, and water transfer rate at the anode on MEA resistance and performance. The experimental setup included humidity measurements, polarization and electrochemical impedance spectroscopy tests to quantify the effect of membrane hydration on its resistance in a lightweight MEA integrated with an inflatable dead-end hydrogen storage bag. Varying current density (20 mA, 40 mA and 60 mA) and cathode humidity (20, 50 and 80%) were examined and compared with the numerical results. The validated model predicts that the hydration state of the membrane and water transfer rate at the anode can be increased by using a thin membrane and thicker gas diffusion layer.

In recent years, researchers in the field of cultural heritage have intensified their efforts to develop new ways to enhance the promotion and accessibility of cultural content in order to attract more audiences using virtual representations of physical objects (digital twins). Therefore, they increasingly include new technologies and digital tools in their operation, since their application both to the general public and among the cultural organisations themselves, is considered particularly effective. Simultaneously, the increasing quality of the produced digitizations has opened up new opportunities for further exploitation of digitization outcomes in a broader context than was initially anticipated. Responding to the growing demand of museum visitors for a personalized digital tour experience, especially in the midst of the recent Covid-2019 pandemic, the v-PalM project aims to develop a digital platform for offering virtual guidance and education services at the Museum of Paleontology and Geology that is hosted at the National Kapodistrian University of Athens. The development of the platform will be based on collecting data through several methods including crowdsourcing, innovative information and communication technologies, taking advantage of content digitization using 3D scanning devices. In this paper, we demonstrate a methodology for the digitization of paleontological findings that can be used for creating digital twins suitable for various scenarios including research, education, and entertainment.

Plant N concentration (PNC) has been commonly used to guide farmers in assessing maize (Zea mays L.) N status and making in-season N fertilization decisions. However, PNC varies based on the development stage and therefore a relationship between biomass and N concentration is needed (i.e., critical N dilution curves; CNDC) to better understand when plants are N deficient. A few CNDC have been developed and used for plant N status diagnoses, but have not been tested in the US Midwest. The objective of this study was to evaluate under highly diverse soil and weather conditions in the US Midwest the performance of CNDCs developed in France and China for assessing maize N status. Maize N rate response trials were conducted across eight US Midwest states over three years. This analysis utilized plant and soil measurements at V9 and VT development stages and final grain yield. Results showed that the French CNDC (y=34.0x-0.37, where y is critical PNC, x is aboveground biomass) was better with a 91% N status classification accuracy compared to only 62% with the Chinese CNDC (y=36.5x-0.48). The N nutrition index (NNI), which is the quotient of the measured PNC and the calculated critical N concentration (Nc), based on the French CNDC was significantly related to soil nitrate-N content (R2=0.38-0.56). Relative grain yield on average reached a plateau at NNI values of 1.36 at V9 and 1.21 at VT, but for individual sites ranged from 0.80 to 1.41 at V9 and from 0.62 to 1.75 at VT. The NNI threshold values or ranges optimal for crop biomass production may not be optimal for grain yield production. It is concluded that the CNDC developed in France is suitable as a general diagnostic tool for assessing maize N status in US Midwest. However, the threshold values of NNI for diagnosing maize N status and guiding N applications vary significantly across the region, making it challenging for guiding specific on-farm N management. More studies are needed to determine how to effectively use CNDC to make in-season N recommendations in the US Midwest.

This study proposes a framework to integrate Sustainability within Management Systems Standards and subsequently implement and disclose Sustainable Development goals and results. Moreover, it investigates the SD goals (SDGs) and results (SDRs) that Portuguese organizations with Integrated Management Systems (IMSs) disclose to their interest parties. The study, supported by content analysis, highlights that the four more frequently disclosed SDGs are “life on land“(50.0%), “industry, innovation, and infrastructure” (47.1%), “responsible consumption and production” (47.1%), and “partnerships for the goals” (47.1%). Conversely, the four SDRs most frequently disclosed are “employment” (82.4%), “economic performance” (79.4%), “anti-corruption” (64.7%), and “occupational health and safety” (61.8%). Hence, SDGs disclosure emphasizes the environmental dimension, while SDRs disclosure highlights the social dimension (economic dimension present in both SDGs and SDRs). Finally, the disclosure of SDGs and SDRs in institutional reports presents a positive and strong correlation that is statistically significant. Overall, the contributions of this research are twofold. First, it supports the integration of the SDGs within organizations, and second, it stimulates the demonstration of their impacts on the SDGs (the SDRs).

As most Korean OTT subscribers use mobile devices as their primary medium for watching OTT video content, mobile network traffic is soaring. However, the existing build-out of mobile communication technology – such as deploying more base stations or expanding the network bandwidth – is struggling to keep pace with the enormous increased demands of mobile network traffic. Accordingly, wireless device-to-device (D2D) caching networks are considered one of the most reliable alternatives for reducing the overload from mobile network traffic caused by streaming video content online. However, wireless D2D caching networks have pros and cons, like any other technology. Thus, this study aims to examine the practical decision-making process of mobile OTT service users in response to the application of wireless D2D caching networks on their mobile devices. An online survey of 94 respondents was conducted in South Korea during 19–23 May 2022; the data obtained were analyzed using the analytic hierarchy process (AHP) approach. The study finds that it was the risks, rather than the situational conditions and benefits, that mostly affected mobile OTT service users’ behavioral intentions and strategies. Streaming video content using mobile data or Wi-Fi was perceived as the most viable option. Mobile OTT service users were also willing to take the leap of shifts towards downloading video content in advance rather than adopting wireless D2D caching networks on a mobile device. However, mobile OTT service users’ decisions are heavily dependent on situational conditions related to use of mobile OTT services that make the quality of service consumption different. As one of the first to examine the responses of mobile OTT service users, this study provides meaningful implications for a timely and sensitive issue.

Studies of dietary preferences of migratory species are of great importance as these species connect food webs of habitats across the migration route and thus represent trophic relationships between the spatially disjointed communities. Here we describe dietary preferences of threespine stickleback G. aculeatus in the White Sea during the spawning season using stable isotope and stomach content analyses. Both analyses indicated that during the spawning season, when sticklebacks spend most of the time in the inshore, their diet significantly consist of benthic species in contrast to the start of the spawning season when fishes migrating from the offshore are feeding on zooplankton. Also, we show that stickleback eggs contribute greatly to the diet of both male and female fishes. Using Bayesian mixing modelling we show that dietary preferences in females were broader than in males, and more variable during the spawning season. Males fed on eggs almost while guarding their nests. Both stomach contents and isotope signatures demonstrate that by the end of the spawning season sticklebacks again increase consumption of plankton, and isotope analysis proved to be more reliable tool to trace this change than stomach content analysis. Our results show that stable isotope and stomach content analyses well supplement each other in understanding of seasonal changes in dietary composition of stickleback.

High-content fluorescence microscopy combines the efficiency of high-throughput techniques with the ability to extract quantitative information from biological systems. The planarian community has developed sensitive and robust assays for whole animals, yet cell based assays, despite their practical aspects, have not been explored to the same extent. Here we describe a modular collection of detailed protocols adapted for fixed planarian cells that enable multiplexed measurements of biomarkers in microwell plates. Methods include the detection of RNA transcripts by RNA fluorescent in situ hybridization combined with tyramide signal amplification using hapten-labeled riboprobes. In addition, immunocytochemical protocols for quantifying proliferating cells by the detection of phosphorylated histone H3 as well as 5-bromo-2'-deoxyuridine incorporation into the nuclear genome are described. The assays are compatible with planarians of virtually any size, as the tissue is disaggregated into a single cell suspension before fixation and staining. By sharing many reagents with established planarian whole mount staining protocols, preparation of samples for high-content microscopy adoption requires little additional investment. Recommendations for successful experimental workflows and common sources of errors are discussed.

The aim of this work was the study and evaluation of winery by-products in the framework of circular bioeconomy. Grape seeds and grape skins from Greek traditional Ionian Islands varieties were analyzed in an attempt to provide the appropriate basis for model development of their sustainable exploitation at a local or regional level. The wastes collected directly from the wineries immediately after the vinification process and analyzed by chromatographic and spectroscopic techniques. Also, annual production and yields were estimated. Grape seed oil quality was evaluated based on fatty acid methyl esters (FAMEs) composition. Grape skins phenolic fraction was extracted by an eco-friendly, non-toxic water-glycerol solvent system and were detected qualitatively. Also, total phenolic content (TPC) and antioxidant activity were measured. Based on estimated yields, our results demonstrate that winery by-products have the potential to promote the cyclical bioeconomy in a modern economic growth model that will reduce waste, and environmental costs as they can be reused as whole material in foods, dietary supplements, cosmetic ingredients, food colorants and preservatives.

Peer-to-peer (P2P) content distribution or file sharing system aims to facilitate the dissemination of large files over unreliable networks. Network coding is a new transmission technique that has captured the interest of researchers because of its ability to increase throughput and robustness of the network, and decrease the download time. In this survey paper, we extensively summarize, assess, compare, and classify the most recently used techniques to improve P2P content distribution systems performance using network coding. To the best of our knowledge, this survey is the first comprehensive survey that specifically focuses on the performance of network coding based P2P file sharing systems.

African locust bean (Parkia biglobosa (Jacq.) is a multi-purpose economic tree with genetic potentials in sub-Saharan Africa. Its cultivation and production is declining with increased aging and genetically threatened throughout its natural ranges. Research efforts are needed to change the present scenario to sustainable cultivation and utilization, hence this present study. This study was aimed at evaluating genetic diversity and geographical spread relationships of twenty landraces collected from different ecological zones of Nigeria using simple sequence repeat (SSR) markers. Ten SSR markers were screened and five primers (PbL02, PbL03, PbL04, PbL05 and PbL09) were selected based on clear amplification products and reproducible scorable bands. The SSR primers detected a total of 55 alleles ranged from 10 to 14 alleles with a mean of 11. The percentage polymorphisms were high and ranged from 68.75 % in PbL04 to 84.21 % in PbL05 with a mean of 74.16 %. The polymorphic information content (PIC) was in the range of 0.31 in PbL02 to 0.37 in PbL09. The genetic diversity and heterozygosity values ranged from 0.39 to 0.50 and 0.00 to 0.68 while the average genetic distance for all pair wise comparisons was 0.31.The first five Principal Component (PC) accounted for 70.20 % of the total variation out of which PC1 (31.50%) and PC2 (19.20%) extracted 49.70% molecular similarity. The dendrogram resulted in separation of the 19 landraces into three major clusters based on unweighted pair group method with arithmetic average. Cluster I comprised of five landraces: ABNo130 and BENo023; OYNo11, KANo125 and NiNo262 while cluster II had only one (BANo116). Cluster III was diverse comprising 13 landraces: ZANo188, KNNo162, KENo220, GMNo076 and EbNo260, ADNo64, EdNo164, KANo137, KENo217, KwNo270, NiNo241, OsNo206 and PLNo120. The homogeneity of alleles among the studied landraces suggested suspicion of loss of genetic intra-specific variation among the landraces of P. biglobosa which calls for concerted efforts toward better cultivation, conservation, management, utilization and genetic improvement of the species in Nigeria.

Soil erosion seriously affects vineyards. In this study, the influence of two plant covers on soil moisture and the effect of different physiographic conditions on runoff and sediment yields were evaluated in a rainfed vineyard formed by four fields (NE Spain) during 15 months. One field had spontaneous vegetation as plant cover and three fields had a cover crop of common sainfoin. The vineyards’ rows were dry and stable, whereas the inter-row areas were wet although very variable, and the corridors were wet and very stable. Soil moisture in the inter-row areas with Common sainfoin was much higher than in the rows (62% - 70%) whereas this difference was lower with spontaneous vegetation (40%). Two runoff and sediment traps (STs) were installed in two ephemeral gullies, and 26 time-integrated surveys (TIS) done. The mean and maximum runoff yields were 9.8 and 30.7 l TIS^–1 in ST2 and 13.5 and 30.2 l TIS^–1 in ST3. The mean turbidity was 333 and 19 g l^–1, and the maximum sediment yields were 41,260 and 2,778 g TIS^–1 in ST2 and ST3. Changes in the canopy covers (grapevines and plant covers) and rainfall parameters explained the runoff and sediment dynamics.

Implementation of the German Climate change Strategy in the Federal State of Saxony-Anhalt is discussed in this paper. It shares the requirement and importance of sustainable development. An overview of strategy, The DAS Indicator System is provided with results of a portion of work being done for the ministry of agriculture by Deutscher Wetterdienst (DWD). Applicability of the indicator system is also shown by evaluation of results for specific indicators from 1961-2015.

The SPEcies-At-Risk index for metals (SPEARmetal) was refined using updated physiological sensitivity data and validated to assess the ecological impact of metal contamination on benthic macroinvertebrate communities in the upper Nakdong River, near a Zn smelter in Korea. Biosurvey and chemical monitoring were collected at 18 sites surrounding the smelter and nearby mines. Acute ecotoxicity tests on 20 indigenous species from the Korean peninsula were conducted and used to update taxon-specific metal sensitivity data. The refined SPEARmetal index, based on this updated sensitivity, was significantly lower than previous versions, with most values below the severe impact threshold (0.5) in the mainstream. The correlation between hazard quotients in water and the SPEAR index improved, with the correlation coefficient increasing from 0.63 to 0.70. Despite consistently high benthic macroinvertebrate indices (BMI) across the study area, generic ecological indices such as total richness, EPT (Ephemeroptera, Plecoptera, Trichoptera), and Shannon diversity showed correlations with metal contamination levels. Principal component analysis identified SPEARmetal as the primary indicator associated with metal contamination in both water and sediment. These findings highlight the improved performance of the refined SPEARmetal index as a more sensitive and specific tool for assessing the ecological status of metal-impacted aquatic ecosystems compared to traditional indices.

Complexity of issues in cancer research has led to the introduction of powerful computational tools for helping experimental in vivo and in vitro methods. These tools, typically focused on studying cell behavior and dynamic cell populations, range from systems of differential equations solved numerically, to lattice models and agent-based simulations. In particular, agent-based models (ABMs) are increasingly used for they capability to incorporate multi-scale features ranging from the individual up to the population level, thus combining statistically aggregated assumptions with individual heterogeneity. In this work, we present an ABM that simulates tumor progression in a colonic crypt, with the aim of providing an experimental in silico environment for testing results achieved in traditional laboratory research and developing alternative scenarios of tumor development. The model also allows some speculations about causal relationships in biologically inspired systems.

Fall are significant cause of mortality and disability among older adults globally, affecting individual health and society. Addressing preventable factors, such as physical health and environmental conditions, is essential. This cross-sectional study aims to understand the factors that influence fall prevention behaviors among older adults in semi-urban community. Methods: A total of 440 older adults were randomly selected from six districts in Samutprakarn Province, Thailand. Well-trained data collectors conducted individual interviews with the participants in community-based setting. Results: Multiple logistic regression analysis was conducted, revealing that 96.3% of older adults demonstrated good fall prevention behaviors. The factors significantly associated with these behaviors included being female (OR = 4.39, 95% CI: 1.42-13.52), having good knowledge of fall prevention (OR = 9.19, 95% CI: 2.78-30.38), and perceiving the severity and susceptibility of falls, along with the benefits and barriers to prevention (OR = 11.25, 95% CI: 3.36-37.69). Additionally, sufficient access to health information (OR = 4.94, 95% CI: 1.61-15.16) and strong social support (OR = 4.06, 95% CI: 1.30-12.71) were also significant factors. In conclusion, a high percentage of older adults practiced good fall prevention behaviors, influenced by factors such as gender, knowledge, perception of fall risks, access to health information, and social support. Policy makers should prioritize enhancing health education on fall prevention, improving access to health information, and strengthening social support systems for older adults to further reduce fall-related risks and disabilities.

Cell viability refers to the proportion of living, healthy cells within a given population. This information is crucial in any cell-based research, especially in toxicology. Over the past century, numerous methods for assessing cell viability have been developed. These methods can be categorized into five main types: non-invasive cell structure damage, invasive cell structure damage, cell growth, cellular metabolism, and cell membrane potential. Each method operates on different principles and has its own advantages and disadvantages, making it essential for researchers to choose the method that best fits their experimental design. Despite the variety of cell viability methods available, most rely on indirect measurements of cell viability, which may compromise their accuracy. In this sense, there is insufficient information regarding their accuracy, highlighting the need for researchers to investigate the accuracy of both existing and future methods.

Protected and conserved areas are a key area-based strategy to address the biodiversity and climate change crises. Fundamental to understand their performance over time are indicators. The Digital Observatory for Protected Areas (DOPA) was born in 2013 as a set of open access web services and applications to be used to assess, monitor, and report on protected and conserved areas. For over a decade it has delivered over 50 indicators to support policy processes, national and regional governments, and practitioners. DOPA has also developed a versatile and efficient back-end approach that is widely applicable in other area-based conservation contexts. Here, we describe the methods and workflows behind DOPA´s back end and provide examples of policy relevant questions it can answer. We discuss key advantages and limitations of this systematic and replicable approach and explore the use of this back-end architecture to inform progress in area-based conservation targets for the following decades. This approach, embedded in multiple services provided by the Knowledge Centre for Biodiversity of the European Commission (KCBD), can also support the implementation and monitoring of area-based targets of the Kunming Montreal Global Biodiversity Framework at international, regional, and national levels.

Time-of-Flight (ToF) cameras are subject to high levels of noise and errors due to Multi-Path-Interference (MPI). To correct these errors, algorithms and neuronal networks require training data. However, the limited availability of real data has led to the use of physically simulated data, which often involves simplifications and computational constraints. The simulation of such sensors is an essential building block for hardware design and application development. Therefore, the simulation data must capture the major sensor characteristics. This work presents a learning-based approach that leverages high-quality laser scan data to generate realistic ToF camera data. The proposed method employs MCW-Net (Multi-Level Connection and Wide Regional Non-Local Block Network) for domain transfer, transforming laser scan data into the ToF camera domain. Different training variations are explored using a real-world dataset. Additionally, a noise model is introduced to compensate for the lack of noise in the initial step. The effectiveness of the method is evaluated on reference scenes to quantitatively compare to physically simulated data.

Several years now, the global scientific community has accepted and recognized the importance of Evidence-based practice (EBP) for Nursing science. The main factor for the implementation of EBP is the competence of undergraduate Nursing students towards EBP, so that they as active nurses be ready for its application in their clinical practice, in order to provide better care for their patients. The aim of the present study is to examine the level of evidence-based practice competency evaluated with the self-reported EBP-COQ questionnaire. A quantitative study based on cross-sectional design was conducted from February to June 2022 in a convenience sample of Greek undergraduate nursing students. The Evidence-Based Practice Competence Questionnaire (EBP-COQ) and a questionnaire on undergraduate students’ gender, age, academic year, and training in the field of research were used. The SPSS 26.0 program was used to perform descriptive, bivariate and multivariate analyses. A total of 175 undergraduate students participated at the Hellenic University Nursing (Greece), specifically from the 2nd and 3rd academic year. The mean score of EBP-COQ for nursing undergraduate students was 3.03 ± 0.26, indicating moderate EBP. Among the EBP-COQ dimensions, the mean scores were obtained 3.03 ± 0.32 for Attitude toward EBP, 3.01 ± 0.49 for Skills in EBP, and 3.03 ± 0.49 for Knowledge in EBP. They were not found significant differences among participants’ mean EBP-COQ scores regarding gender (p = 0.766), age (p = 0.400), academic year (p = 0.153), and training in the field of Research Methodology (p = 0.538). It appears that the level of readiness towards EBP is mediocre between undergraduate nursing students at a university in Greece. Therefore, it is necessary to carry out new studies in the future, so that there is a correct approach of all the elements that contribute to the readiness of Nursing undergraduate students regarding EBP.

The implementation and sustainability of evidence-based practice (EBP) is a complex process. Best practice guidelines (BPGs) can facilitate the translation of knowledge from theory into practice, but they require working groups to adapt recommendations and encourage adherence to them. The aim of this study was to identify facilitators and barriers of BPGs in the Registered Nurses’ Association of Ontario®, within the framework of Best Practice Spotlight Organisations® (BPSOs®), in a hospital setting. The study was conducted using the modified Delphi method (two rounds) with a cohort of BPSO® Best Practice Champions. The facilitators and barriers included in the first round were identified through a bibliographic search. The degree of concordance was determined in the second round using the highest mean resulting values. A total of 44 nurses responded, with a mean age of 42.57±8.563. Facilitators included: Work Environment; Working in a hospital that encourages research; and Dedicating time to EBP (p&lt;0.001). Barriers: Excessive workload; Professional mobility (p&lt;0.001); and Lack of time (p=0.002). As such, it is necessary to approach human resource management by implementing new policies that guarantee systemic sustainability. The BPSO® programme is an excellent framework for promoting the translation of theoretical knowledge into practice and effecting institutional change.

This article explores the transformative potential of fermentation in elevating the quality of plant-based matrices to match the desirable attributes of traditional dairy and meat products. As the demand for sustainable products without animal welfare issues increases, fermentation emerges as a key process to enhance the organoleptic properties and nutritional content of plant-based analogs. This study explores the effect of fermentation when applied to legume matrices, focusing on the resulting texture, flavor, and nutritional value. A selection of Bacillus subtilis, lactic acid bacteria (LAB) strains, and combinations thereof, showed potential for improving the aforementioned organoleptic and nutritional characteristics of fermented plant bases. In four different legume-derived matrices, fermentation improved texture, degraded undesirable plant carbohydrates, and removed off-flavor compounds, while producing desirable dairy-associated compounds. The degradation of the undesirable beany off-flavor-causing compound hexanal appears to be a universal phenomenon, as every tested strain as well as their combinations exhibited the capability to decrease the hexanal content albeit with varying efficiency. Some LAB strains were found to be capable of producing carotenoids and might hence have the potential for tailoring fermented plant-based matrices for specific applications, such as yellow cheese or red meat analogs.

Direct competitions involve competitors that mutually contend for the same resource or objective. A controlled, well-documented, and data-rich field involving direct competition is represented by sports. Usually the winner of sports competitions is believed to be the one with the greatest talent, however, there are other factors that contribute to the outcome of a competition, there are in fact random, unpredictable events that can change the outcome of a competition. For this reason, if one wants to understand the properties of a competition is necessary to have a method to evaluate the importance of the talent or aptitude of a competitor, as opposed to the importance of chance, in determining the outcome of the competition itself. In this work we study the sport of tennis using the data obtained from the Association of Tennis Professionals (ATP) tournaments. We construct an agent-based model that is able to produce data analogous to the real one; this model depends on three parameters, the talent, the action of chance, and the weight of talent. In particular, we don't fix the values of these parameters and we fit the model results using a genetic algorithm, in this way, we study all the possible combinations of parameters, in the parameter space, that are able to reproduce the real systems data. We show that the model fits well the real data only for limited regions of the parameter space. On these limited regions of the parameter space are possible further optimization of the model results, limiting the values of parameters. In this way, our agent-based model, by means of this genetic algorithm calibration, is able to provide us with useful information without any a priori constraints.

Patients with Multiple Myeloma have an increased susceptibility to severe infections due to several various factors, especially the high tumor burden. The use of the anti-CD38 monoclonal antibodies-based therapies has changed the frequency and epidemiology of infections. We report herein the safety profile of the pivotal clinical trials conducted with anti-CD38 mAbs (daratumumab and isatuximab) and anti-SLAMF7 mAbs (elotuzumab) that led to the approval of regimens employed today in NDMM and RRMM patients.

This research paper presents our investigation of the evolving trends in the field of Learning Sciences (LS) from 2005 to 2021. LS is a multidisciplinary field that integrates various scientific disciplines to study and support learning in real-world contexts (Hoadley, 2018). Our paper aims to understand how LS practices, methods, and disciplines of interest have changed over time, considering factors like the COVID-19 pandemic and the call for more equity-based research. We collected data from the International Society of Learning Sciences (ISLS) repository, which serves as one major platform that showcases LS research. We analysed the proceedings of the ISLS annual meetings and conferences, focusing on variables such as title, abstract, issue date, publisher, and collection using web scraping tools and the RStudio software for data collection and analysis. Our findings indicate several trends in LS research. In terms of methods and practices, design-based research (DBR) and participatory methods were commonly used in LS studies. However, there was a decline in the adoption of DBR in 2021, possibly due to the limitations imposed by the COVID-19 pandemic. Project-based learning, embodied interaction, and game-based learning were the most frequently used techniques among LS researchers. When examining the population of interest and domain focus in LS research. Learners were the primary focus, with a significant increase in the number of studies focusing on students over the years. However, there was also a noticeable increase in studies focusing on teachers in more recent years. In terms of subject disciplines, science and mathematics were the primary areas of focus, but there has been increasing attention to the arts and technology in recent years. Concerning equity-based research in LS, the finding revealed a significant increase in this area from 2005 to 2021, with ICLS studies tending to focus more on equity compared to CSCL studies. These findings contribute to understanding the current status and future development of the learning sciences.

This article evaluates the reliability and consistency of nutrition- and supplementation-related advice for pregnant women provided by ten selected health-related Internet portals. The portals were chosen based on their perceived reliability and prominence in Google searches, with representation from both English and Polish language sources. The evaluation criteria included the adherence of the presented information to official recommendations and its evidence-based character based on specific items representing dietary aspects important in pregnancy. While the overall reliability was deemed acceptable, significant variations existed both among the portals and specific evaluated items. Notably, HealthLine, Medline Plus, and NCEZ emerged as the most evidence-based, while WebMD and Medycyna Praktyczna were identified as less reliable. Despite a number of issues, the analysed portals remain valuable sources of nutritional information for pregnant women, offering user-friendly accessibility superior to alternatives such as social media, on the one hand, and scientific articles, on the other. Improved consistency and attention to detail, especially in relation to vitamin intake and supplementation, would improve the overall quality of health portals.

Gender has been a rarely addressed aspect in digital game-based learning (DGBL). Likewise, mixed results have been presented regarding the effects according to gender and the conditions that generate these effects. The present work studies the effects of a drill-and-practice mathe-matical game on primary students. The study focused on an analysis by gender, measuring learning performance, and motivation in the practice activity. Also, two instructional mechanics were considered regarding the question answering, a multiple-try (MTF) and a single-try (STF) condition, to search for possible differences. A total of 81 students from 4 courses and 2 schools participated in the experiment. The study's main findings were that: (a) the girls outperformed boys in terms of students' learning gains, (b) girls presented lower levels of competence and autonomy than boys, (c) in the MTF, girls presented lower levels of autonomy but no differences in competence contrasted to boys, (d) in the STF, girls presented lower levels of competence but no differences in autonomy against boys, and (e) no differences existed in interest, effort and value among gender overall o per instructional condition. This study enhances the knowledge of gender differences under diverse instructional settings, in particular providing insights into possible differences by gender when varying the number of attempts provided to students.

Approximately 20% of the world's population resides in coastal areas at risk of rising sea levels due to climate change. This could lead to severe weather events and ecological impact on critical infrastructure. To combat the effects of water-based environmental forces on the land, hard engineering methods such as seawalls have been utilized. However, a more sustainable solution is emerging in nature-based engineering, which involves growing vegetation. This approach can help extend the lifespan of existing technology and provide climate change adaptation and resilience for coastal and riverine communities. The following paper will review seaweed farms as an advanced nature-based mitigation approach. The paper also outlines the findings of experiments at RWTH Aachen University's hydraulic laboratory. These tests involved using seaweed as a natural solution to dampen waves in a model system to test a hypothesis. One result involving a system with two lines of seaweed revealed 15 percent wave damping. Using seaweed as a nature-based solution, a gentle engineering approach to designing future vegetated protection systems can extend the design life of existing coastal infrastructure. This can also provide protection against climate-induced sea level rise, promote coastal risk mitigation, restore ecosystems, and foster blue bio-economic development.

The digital era has significantly amplified the volume of online reviews, presenting both opportunities and challenges in harnessing insights from consumer feedback. Aspect-Based Sentiment Analysis (ABSA) has emerged as a crucial tool for distilling sentiments from these reviews, providing valuable data for enhancing product and service quality. This study introduces an advanced hybrid model, AdvSentiNet, which integrates adversarial training into the state-of-the-art framework to elevate the precision of sentiment detection at the aspect level. By employing an adversarial network, where a generative model competes against a classifier by crafting highly realistic synthetic samples, we aim to bolster the model's resilience against varied data samples. This innovative approach, unexplored in its entirety within the realm of ABSA, demonstrated remarkable performance improvements on benchmark datasets. For instance, accuracy on the SemEval 2015 dataset escalated from 81.7% to 82.5%, and for the SemEval 2016 dataset, it surged from 84.4% to 87.3%.

The interest in virtual fencing, as opposed to traditional physical barriers, has increased since it makes it easier to move the boundaries of animal enclosures for agricultural and rewilding purposes. Despite this, the implementation of virtual fence systems, such as the Nofence© system, requires large financial investments. The necessity of individual collars also makes it more difficult to implement this system on a larger scale. If a herd of cattle tend to maintain cohesive social groups around dominant individuals, it might be possible to use fewer collars thereby making the system more cost efficient. This study investigates the pattern in spatial distribution in a herd of 17 Angus cows on Fanø in Denmark with GPS locations, using a Nofence© system. The aim of this paper is to determine how individuals position themselves in a herd, spatially, and identify a pattern in ranks. The method used in this study examines the distances between an individual to the rest of the herd mates using nearest neighbour and distribution plots. Contrary to the expectations, this study did not show a distinct pattern in herd distribution. While some tendencies in spatial distribution patterns were observed, only a low concordance could be found (W=0.15,p=3.02e−16). Therefore, interactions among individuals should be considered in future studies, rather than only investigating the herd as one unit. A cumulative curves of the ranks estimated over the entire periods allowed however a rough estimation of the hierarchy and allowed the identification of the highest ranked cows. Therefore it might be possible to use fewer collars if the high ranked cows are discovered, but the estimation of the hierarchy will require a period of observation overall several days as the hierarchical positions are fluctuating too much from days to days. Therefore the cumulative rank curves seems to be a valid solution.

Hybrid materials are a recent addition in the field of Restorative Dentistry for computer-assisted design/ computer-assisted manufacturing (CAD/CAM) indirect restorations. The long–term clinical success of modern dental restorative materials follows a multifactorial pattern. Among the characteristics, affecting the longevity of a restoration, mechanical properties and physicο – chemical interactions are of utmost importance. While numerous researchers constantly evaluate the mechanical properties, the biological background of resin–based CAD/CAM biomaterials is scarcely investigated and, therefore, less described in the literature. This review aims to analyze the biofilm formation on the surfaces of novel hybrid, resin–based CAD/CAM materials and evaluate the methodological protocols followed to assess microbial growth. It is demonstrated that the surface structure, the composition and the finishing and polishing procedures on the surface of a dental restorative material influence the initial bacterial adhesion; however most studies focus on in vitro protocols, whereas in vivo and/or in situ research of microbiomics in CAD/CAM restorative materials is lacking, obstructing in that manner the accurate understanding of the bioadhesion phenomenon in the oral cavity.

Apoptotic cells possess immunomodulatory effects that can be utilized to treat imbalanced immune conditions. Information on the preclinical safety of such treatment is sparse. In this study, the safety of apoptotic cells (Allocetra-OTS) was assessed in a GLP toxicological study on Sprague Dawley rats. Three doses of Allocetra-OTS or vehicle were administered intravenously (IV) for 3 consecutive days. Animals in the Main study were sacrificed on day 4, while animals from the Recovery groups were kept for 14 or 28 days. Allocetra-OTS was well tolerated, and no adverse effects were observed in body weight, clinical signs, food consumption or ophthalmologic observation. Thus, the No Observed Adverse Effect Level (NOAEL) dose was determined as the highest dose administered. An observed elevation in immune cells was suspected to be due to Allocetra-OTS; similarly to other clinical chemistry parameters, however, it was resolved in the Recovery phases. Splenomegaly and a dose-related Extramedullary Hematopoiesis (EMH) in the red pulp were observed, with no adverse events, and were considered to be a normal and expected reaction following IV administration of cell-based therapies. In conclusion, under the conditions of this study Allocetra-OTS was concluded to be safe, further supporting its potential candidacy for clinical studies

Dysmenorrhea symptoms are frequent and often self-treated using non-prescription medicines. To further characterize women with dysmenorrhea using a combination of hyoscine butylbromide and paracetamol (PLUS) for self-management of their complaints, we performed a secondary analysis of a published pharmacy-based patient survey. 314 women (mean age 32.3 years) with dysmenorrhea reported a pain and cramps intensity of 7.45 ± 2.13 on a 0-10 Likert scale, which was reduced to 2.86 ± 1.81 upon treatment. Associated impairments of work/daily chores, leisure activities, and sleep were improved by 64.6%, 62.2% and 70.4%, respectively. The onset of symptom relief was within 60 min in 84.7%. Tolerability was rated as very good or good by 97.2%. These findings confirm the efficacy and tolerability data on PLUS from randomized controlled trials in a larger group of women conducting self-management of their dysmenorrhea.

Technological advancements must keep pace with earth’s rising demand for energy, while minimizing the carbon footprint on earth. One such option is using space based solar (SBS) radio frequency (RF) microwave power beaming. This innovative and novel technology is currently being explored to address terrestrial photovoltaic (PV) intermittency and provide a method to transmit power to other spacecraft in various orbits. This modality of power generation and distribution presents a new way to power terrestrial off-grid applications and earth orbiting spacecraft. In 1968, Dr. Peter Glaser published "Power from the Sun: Its Future", which serves as the foundation of this paper to revitalize scientific interest and efforts in this topic. This paper will primarily focus on the reliance of SBS initiatives on reusable launch vehicles (RLV) to place SBS spacecraft in a designated orbit, as well as the technological, economic, and operational challenges associated with power beaming to earth and other spacecraft. This includes a discussion of the variables from the operational environment that contribute or accelerate spacecraft end of life.

“Anti-stripping Agents" or "adhesion promoters” can enhance the chemical affinity between as-phalt and aggregate by increasing their mutual attraction. Various forms of anti-stripping agents have been proposed to mitigate pavement stripping, and siloxane-based Zychotherm is one of them. Choosing the appropriate type and dose of anti-stripping additives is no doubt vital to the intended performance. Therefore, it is critically important to determine the dose of the additives used in the modification of asphalt binders. This research developed a feasible detection method that can closely measure the dose (0.05% and 0.1%) of siloxane-based anti-stripping liquid agents. Related test methods including heat combustion test, residue visualization, burning, and ignition were implemented. Heat combustion results showed that with the addition of Zychotherm anti-stripping additive, average heat combustion value decreased by 1.34% and 1.72% for 0.05% and 0.1% Zychotherm modified binder respectively. In the burning and ignition process, the modified binder leaves yellowish substances in the residue, which is an indication of the presence of Zy-chotherm. The weight of the yellowish residue relates more to the quantity of Zychotherm in as-phalt binder.

We have successfully synthesized a series of Bi doped BaFe2As2 high quality single crystals for the first time. The x-ray diffraction (XRD) patterns show an expansion of lattice parameter c with Bi doping, indicating a negative pressure effect. By investigating the resistivity, a Fermi liquid (FL) to non-Fermi liquid (NFL) crossover is observed from normal state to antiferromagnetic order state, accompanied by three superconducting transitions labeled as SC I, SC II and SC III which are supposed to be induced from three superconducting realms with various Bi concentration. Thus, the NFL behavior is proposed to be closely related with the presence of superconductivity. The magnetic susceptibility measurements further speculates that the SC I and SC III phases should be filamentary superconductivity while the SC II be a possible bulk superconductivity with TC 7 K.

In his Cynefin classification of system behaviours, Snowden (2007), posits that his Simple (Clear ) and even Complicated system categories are sufficiently understandable to be amenable to the traditional methods of system analysis and modelling. Here, relationships between entities in the system are clear and unambiguous and they behave predictably. So, we can build mathematical “models” to describe how the system is expected to function in different situations. Leaving aside his fourth category, Chaotic, as too hard for the moment, this paper focusses on the third category, Complex systems. Yaneer Bar-Yam [1998] defined "complex systems" as systems that "have multiple interacting components, whose collective behaviour cannot be simply inferred from the behaviour of components." So, the traditional system modelling approach of decomposition into components and attempting to build up a picture of system performance from individual pieces, alone, is no longer appropriate for this class. The problem is that most of the methods we currently employ, and particularly the methods that attempt to make the case that these systems are safe, (such as Fault trees, FMEA. and Root Cause Analysis), rely on this decomposition into components and attempt to make the parts more reliable individually. Even the more systemic approaches, such as Reason’s (1990) Swiss Cheese Model, and Leveson’s System Theoretic Analysis (STPA) (2004), encourage adding layers of protection, barriers, strengthened control loops and better safety critical systems, in the hope that they are making the systems safer. But without a valid model to test the effectiveness of these add-ons, we cannot be sure that they will not have an opposite effect, of making the systems even more complex, unreliable and unpredictable. For complex systems, the careful gathering and documentation of system components and their relationships is still a necessary first step, but we need an additional capacity to model these complex systems to test out and prove they work safely and successfully in the real world. (not just draw fixed component relationships as system “models” (wiring diagrams)) In the last 10 years, an original approach developed by Hollnagel, (2012), to model systems as sets of interactive, interdependent “functions”, (abstracted from and independent of component details), has now been developed to the point where it can take the basic data and structures from the current component focussed system engineering “models”, such as MBSE( Goldberg (1994)), and can pull it all together in a dynamic system model from which analysts can discern how it really works in practice, and predict the emergent behaviours characteristic of complex systems. The paper describes how this methodology developed and how it is currently used to model real situations, to analyse incidents and anticipate events.

This review explores the field of retreatment strategies for the cases filled with calcium silicate-based root canal sealers. Since the introduction of calcium silicate-based materials in dentistry, calcium silicate-based root canal sealers have become popular among dentists because of their biocom- patibility, bioactivity, and sealing ability. Therefore, effective retreatment strategies are indispensable. This article aims to identify the challenges associated with the removal of calcium silicate-based sealers itself and gutta-percha with the sealers during retreatment, evaluate current techniques and materials, and provide future directions for research in this field. Regarding the strategies of removal of root canal sealers, calcium silicate-based sealers are still relatively new materials for clinicians compared with the traditional sealers such as epoxy- or eugenol-based sealers. First, no clinically established solvents have been reported. Second, calcium silicate-based sealers are currently utilized by clinicians in either cold sealer-based technique or warm vertical condensation technique. Third, the setting process of calcium silicate-based sealers generates byproducts primarily calcium hydroxide and secondarily hydroxyapatite, which could interact with dentine. Lastly, there is a lack of clinical studies evaluating the efficacy of retreatment protocols for teeth filled with calcium silicate-based sealers. Therefore, it is important to investigate chemo-mechanical properties of calcium silicate- based sealers itself and their reactions to solvents and/or mechanical instruments, and identify the interfacial properties of calcium silicate-based sealers in respect to dentine and gutta-percha. In addition, researchers in clinical field need to actively gather and report data on retreatments of teeth filled with calcium silicate-based sealers.

Road pavement monitoring represents the baseline to the pavement maintenance process. To quickly fix a damaged road, relevant authorities need a high-efficiency methodology that allows them to obtain data describing the current conditions of a network of roads. In urban areas, large-scale monitoring campaigns may be more expensive and not fast enough to describe how pavement degradation has evolved over time. Furthermore, at low speeds, many technologies are inadequate for monitoring the streets. In such a context, employing black box equipped vehicles to perform a routine inspection could be an excellent starting point. However, the vibration-based methodologies used to detect road anomalies are strongly affected by the speed of these vehicles. In this study, a statistical method was to analyze the effects of speed on road pavement conditions at different severity levels through the data recorded by taxi vehicles. Likewise introduced was a process that overcomes the speed effect when considering road surface conditions. The methodology proposed has succeeded in predicting the right damage severity level based on only two recorded parameters: speed and pavement deterioration index.

Rural areas of advanced industrial countries have frequently experienced a dualistic set of policies: one designed for the land-use sector, especially agriculture; and another dealing with rural development [1]. As problems of industrialised agriculture and forestry emerged, a more joined up approach to policy was advocated. Since the 1980s, at national and international level, new elements of rural policy have emerged to connect these two policy fields, including environmental payments, farm diversification grants, woodland creation within the farm sector and support for community-led local development. Rural land is also closely connected to the biodiversity and climate crises which have become important policy drivers. Policy towards community-led local development has moved further in Scotland than almost anywhere else as a result of policies for community-based land reform, community empowerment and community asset transfer. These communitarian approaches connect closely to collaborative landscape management as it addresses environmental challenges. As collaborative place-based and area-based approaches emerge as the guiding stars of the new rural development, this paper explores the challenges in the governance of sustainability transitions in moving from a sectoral rural policy hinging around support for land use to one based much more on communitarian values and place-based development.

The integration of robotics and image processing has led to the realization of robot autonomy in dynamic environments through the provision of visual feedback. This paper presents the application of parallel and open-link robots in palletizing and shape drawing tasks as enhanced by visual feedback from image processing. In determining the set of joint angles that could be used to reach the desired position and orientation of the end effector, the geometric approach in which the spatial geometry of the robotic arms was decomposed into several plane geometry problems was employed. Image processing techniques were used to enhance the performance of the robotic manipulators. In one approach, Color-based segmentation was used to distinguish between different objects in the workspace by using predefined color markers as references in the L*a*b color space. Classification of each pixel in the workspace image was then done by calculating the Euclidean distance between that pixel and a predefined color marker. A second approach employed Edge detection to identify the boundaries of objects within the workspace image by employing the Hough Transform mathematical model to detect the abrupt changes in the image brightness pixel-wise. The pixel locations from Hough were then sorted sequentially to outline the detected object. The integration of image processing with the robotic tasks was expected to improve the precise detection of the position of objects as well as the outline of geometric shapes. The incorporation of visual feedback allowed for dynamic robot manipulation in which prior knowledge of the workspace was not requisite. This led to improved pick and place as well as shape detection as applied in palletizing and shape drawing tasks actuated by the parallel and serial link manipulators, respectively.