Reasonable allocation of production plans and saving the overall electricity cost are crucial for large manufacturing conglomerates, which is an effective way for conglomerates to realize open-source and cost-saving. This paper develops an optimization model of off-site industrial production scheduling for enterprises in response to the problems of high electricity costs due to the irrational allocation of production schedules on the demand side of China's electric power and the difficulty of promoting industrial and commercial distributed photovoltaic (PV) projects in China. The model makes full use of the conditions of different PV resources and different electricity prices in different places to optimize the scheduling of industrial production in different places. The model is embedded with two sub-models of the electricity price prediction model and distributed photovoltaic kWh cost model to complete the model parameters, in which the electricity price prediction model utilizes the LSTM neural network. The integrated model is then solved by the particle swarm algorithm. To verify the effectiveness of the model in solving the problem of off-site production scheduling on the demand side of electricity, the research team researched two off-site pharmaceutical factories belonging to the same large pharmaceutical company. Finally, the research data were substituted into the model for solving, and it was concluded that the optimization model could significantly reduce the cost of electricity consumption of the enterprise by about 7.9 %.

The relationship between metabolic changes occurring in the developing internodes of sugarcane and the final yield and sugar characteristics is poorly understood. This is due to the lack of integration between phenotypic and metabolic data. To address this issue, a study was conducted where sugarcane metabolism was modelled based on the measurement of cellular components in the top internodes at two stages of crop development. The study also looked at the effects of Trinexapac-ethyl (Moddus®) on growth inhibition. The metabolome was measured using GC-analysis while LC-MS/MS was used to measure proteome changes in the developing internodes. The data was then integrated with the metabolic rates. The study revealed that the duration of internode growth is independent of the growth rate and is probably controlled by the accumulation of heat units (degree days). In contrast, sucrose and lignin accumulation is sensitive to the growth rate. Sucrose accumulation only occurs once the cell wall synthesis slow down. The data suggest that sucrose accumulation is controlled a reduction in sucrose breakdown for metabolic activity and a reduction in demand for carbon for cell wall polysaccharide synthesis. This study also found that nucleotide sugar metabolism appears to be a key regulator in regulating carbon flow during internode development.

Ocean big data is the scientific practice of using big data technology in the marine field. Data from satellites, manned spacecraft, space stations, airship, unmanned aerial vehicles, shore-based radar and observation stations, exploration platforms, buoys, underwater gliders, submersibles, and submarine observation networks are seamlessly combined into the ocean’s big data. Increasing numbers of scholars have tried to fully analyze the ocean’s big data. To explore the key research technology knowledge graphs related to ocean big data, articles between 1990 and 2020 were collected from the “Web of Science”. By comparing bibliometric software and using the visualization software Cite-Space, the pivotal literature related to ocean big data, as well as countries, institutions, categories, and keywords, were visualized and recognized. Journal co-citation analysis networks can help determine the national distribution of core journals. Co-citation analysis networks for documents show authors who are influential at key technical levels. Key co-occurrence analysis network keywords can determine research hot spots and research frontiers. The three supporting elements of marine big data research are shown in the co-citation network. These elements are author, institution, and country. By examining the co-occurrence of keywords, the key technology research directions for future marine big data were determined.

Agriculture and rural regions in Europe face a number of economic, social and environmental challenges. Rural areas are active players in the EU’s green transitions. Weeding is one of the most important factors of agricultural production. New weeding techniques are being developed to enhance sustainability. Among them laser based weeding seems a promising alternative for use of chemicals. WeLASER technique is a novel technique of weed control. Its successful implementation depends on many factors related to the innovation itself, policy context, farming conditions and users’ attitudes. Survey was carried out to provide the insight on the attitudes toward the innova-tive (laser) weed control tool (device - autonomous robot). The CATI method was selected for the survey of farmers opinion and carried out in three countries: Denmark, Spain and Poland. Statistical methods were applied to analyze the results. The study provided knowledge on how farmers see the barriers and opportunities of implementing the device in practice. Positive attitudes of farmers were observed but with high expectations related to quality of the technique and systemic conditions of its implementation.

Classifying network flow subsequences in an Industrial IoT gateway is an effective method for identifying Industrial IoT faults. This paper proposes a subsequence classification algorithm SSGBUL-IKNN based on unsupervised learning encoding to address the problem of low classification accuracy. Firstly, we built a network module based on unsupervised learning to encode the flow sequence of the Industrial IoT gateway. In the encoding module, a subsequence calibration algorithm controls the increasing error during the coding process. Then, the specific fault type is obtained through an improved KNN classification algorithm based on the indication distance source from the integrated coding sequences converted by multi-dimensional network flow sequences. The test result on three Industrial IoT datasets of a sewage treatment plant shows that the accuracy of SSGBUL-IKNN in this paper exceeds 92%, significantly higher than the algorithm DTW and TSF. It reaches the classification requirements of Industrial IoT fault diagnosis.

The aim of the article is to verify differences in the perception of selected factors of sustainability among small and medium-sized enterprises (SMEs) in Central Europe. The subjects of analysis are factors such as corporate social responsibility (CSR), business risk sources (market, financial, personnel, and operational), reputation and social media, national support, social changes, and crisis events in business. The questionnaire was completed by 1,090 SMEs from the business environments of Visegrad Group countries. Statistical hypotheses were verified using Z-scores for two population properties. The most negatively perceived factors among owners and managers in the SME segment are national support and legislative changes. The most positively perceived factor is reputation and social media. The country of doing business is a significant factor. The perception of crisis events in business is most negative among Czech SMEs. More than 80% of Hungarian SMEs perceive their companies as sustainable. In comparison with Slovak and Polish SMEs, Hungarian perceptions are more positive in the context of sustainability. The country of doing business is the strongest factor in evaluating CSR indicators. The positive perception of CSR in Czech SMEs (43.9%) is lower than in other countries.

George Satayana stated that “those who do not learn from history are doomed to repeat it”. As our UK “good outcome” death toll of 20,000 from coronavirus (SARS CoV -2/ COVID -19) in 2020 has sadly been surpassed; never has a phrase been more pertinent. The last major pandemic on a similar scale to COVID-19 is “Spanish Flu” from 1918. We aim to delineate the timeline of events in response to the 1918 Spanish flu pandemic and compare this to the timeline of COVID 19 response, given that the NHS and WHO have since both been long established. In the last 102 years many changes have occurred. Health services across the world have significantly improved, with the advent of mechanical ventilation and antimicrobial treatments. Vaccination programmes against common pathogens have prevented many large-scale disease threats, however novel illnesses have also emerged. Worldwide communication through the Internet and many agencies including the World Health Organisation has improved, and the awareness and surveillance of disease is more prominent. Despite advances in healthcare and communication, the national and international timeline for public health intervention in the current COVID pandemic in comparison to the Spanish flu pandemic of more than 100 years ago is virtually identical. The World Health Organisation operates to promote global health and prevent spread of disease, with this in mind; should the WHO have intervened earlier?​ We need to learn quickly from this pandemic and improve planning for the future.

Physical-law based models are widely utilized in the aerospace industry. One such use is to provide flight dynamics models for use in flight simulators. For human-in-the-loop use, such simulators must run in real-time. Due to the complex physics of rotorcraft flight, to meet this real-time requirement, simplifications to the underlying physics sometimes have to be applied to the model, leading to model response errors in the predictions compared to the real vehicle. This study investigated whether a machine-learning technique could be employed to provide rotorcraft dynamic response predictions, with the ultimate aim of this model taking over when the physics-based model's accuracy degrades. In the current work, a machine-learning technique was employed to train a model to predict the dynamic response of a rotorcraft. Machine learning was facilitated using a Gaussian Process (GP) non-linear autoregressive model, which predicted the on-axis pitch rate, roll rate, yaw rate and heave responses of a Bo105 rotorcraft. A variational sparse GP model was then developed to reduce the computational cost of implementing the approach on large data sets. It was found that both of the GP models were able to provide accurate on-axis response predictions, particularly when the input contained all four control inceptors and one lagged on-axis response term. The predictions made showed improvement compared to a corresponding physics-based model. The reduction of training data to one-third (rotational axes) or one-half (heave axis) resulted in only minor degradation of the GP model predictions.

The effective macroscopic model describing interactions of a viscous compressible heat-conducting fluid and a two-level fine bristly thermoelastic structure is derived from microstructure by means of the Allaire–Briane multi-scale convergence method. This new model naturally generalizes the isothermal formulation earlier constructed by the authors in 2020, see in Siberian Electronic Mathematical Reports, vol. 17 (https://doi.org/10.33048/semi.2020.17.100). In applications, the established model can be used, for example, in description, with account of heat transfer phenomemon, of airflow near surface of plant’s leaf, in simulation of epithelium surfaces of blood vessels, and in design of biotechnological devices operating in liquids.

Lap joints were friction stir welded in AA 7075-T6 at 1320 rpm and using two welding speeds: 70 mm/min and 120 mm/min. The temperature profiles of the weld zone were registered during the process; furthermore, the microhardness, tensile strength, and microstructure of the joints produced were examined. This study brings new insights into the thermomechanical behavior of the material during the process. The peak temperature obtained with the lower welding speed (70 mm/min) is 10% higher than that obtained with the higher speed (120 mm/min). Moreover, a 5% increase in microhardness and a 6% increase in tensile strength were were observed increasing the welding speed. Addition-ally, the microstructure examination demonstrated that, by decreasing the welding speed, the larger interaction between the tool and the material results in a deeper stir zone due to the increased heat diffusion downwards to the material. This heat flow affects the thermal profile and influences the resulting mechanical properties of the welded joints.

This paper presents laboratory devices on which experimental measurements were carried out to prove the validity of the assumption about the reduction of vibrations transmitted to the conveyor belt structure generated by the impact forces of falling material grains in the places of transfer or on the hoppers of conveyor belts. In order to limit damage to the conveyor belts caused by the impact of the sharp edges of material grains, conveyor belts are supported by impact rollers or impact rubber rods in the places of transfers and on the hoppers of belt conveyors. The flattened ends of the impact rollers are inserted into the grooves of steel brackets installed on the supports of the fixed conveyor idlers of a conventional design. In this paper, a special modification of the fixed conveyor idler is presented, which consists of inserting plastic brackets into the structurally modified roller axle holders of the fixed conveyor idler. Measurements were carried out on the first laboratory device, which showed that the specially modified fixed conveyor idler resulted in a higher damping of up to 15% of the impact forces of the falling weight on the rubberized hoop of the impact roller shell compared to the conventional fixed conveyor idler design. Measurements carried out on the second laboratory device show that the effective vibration velocity values detected at the points where the impact roller axis fits into the fixed roller table holder, i.e. points B and D, are higher than when using plastic brackets, up to 6% for a 108 mm diameter roller, compared to steel impact roller brackets.

Deep Eutectic Solvents (DESs) show promising abilities for the delamination of multilayer packaging films that are used in food packaging and in pharmaceutical blister packs. Due to the complexity of their structure, the recycling of these materials is a challenging task, leading to the easiest or cheapest option, landfilling. Towards the development of ‘green’ solvents for the efficient waste management and recycling, the conducted research focuses on the preparation of a range of hydrophobic and hydrophilic DES based on carboxylic acids. Also, their chemical and physical characterization, such as DSC, rheometer and density measurements, was followed for the determination of their properties. The laminate packaging waste products that were tested were Al/PE, PE/Al/PET, Al/PE/paper and PVC/PE/Al. Different batches of solvent systems were tested based on various naturally derived aliphatic and aromatic organic compounds as well as amino acids. The separated films were collected and studied further for the examination of the delamination extend. Results showed full or partial delamination of some materials as well as challenges of solvent systems. Variables such as temperature, agitation rate, mixing time and solvents ratios were monitored and collected during the design of experimental process. The results showed that the used DESs can offer an efficient, low-energy, affordable and green option for the delamination tested packaging materials.

Session-based recommendations which aim to predict subsequent user-item interaction based on historical user behavior during anonymous sessions can be challenging tasks. Two main challenges need to be addressed and improved: (1) How to analyze these sessions to accurately and completely capture users’ preferences, and (2) how to identify and eliminate any interference caused by noisy behavior. Existing methods have not adequately addressed these issues since they either neglected the valuable insight that can be gained from analyzing consecutive groups of items or failed to take these noisy data in sessions seriously and handled them properly, which can jointly impede recommendation systems from capturing users’ real intentions. To address these two problems, we designed a multi-order semantic denoising (MSD) model for session-based recommendations. Specifically, we grouped items of different lengths as varying multi-order semantic units to mine the user’s primary intention from multiple dimensions. Meanwhile, a novel denoising network was designed to alleviate the interference of noisy behavior and provide a more precise session representation. The result of extensive experiments on three real-world datasets demonstrated that the proposed MSD model exhibited improved performance compared with existing state-of-the-art methods in session-based recommendation.

Understanding whether the long-term follow-up (LTFU) system is working for families is critical to measuring the success of newborn screening (NBS) and understanding why some families are lost to follow-up. Caregivers were recruited from six pediatric specialty care clinics. Data was gathered from caregivers via six focus groups (n=24) and open-ended responses on a survey (n=33). Caregiver participants represented a wide range of NBS-related conditions and children’s ages. While this is not the first study to gather caregivers’ input, it is unique in its breadth of perspectives (e.g., metabolic, endocrine, hemoglobinopathy, etc.) and its focus on LTFU. When asked about goals for their children, caregivers identified health-related goals (i.e., ability for children to care for themselves, not being hindered by diagnosis) and non-health related goals (i.e., defining themselves outside of disease, participating in sports, making friends). In qualifying the LTFU care they want and need for their child and the key factors that influence access and engagement, caregivers identified three themes: communication and relationships with providers; care team roles and factors; and care access and utilization factors. The themes identified are not disjoint; they are intertwined and collectively illustrate the lived experiences of families at the epicenter of LTFU care.

This study examines the environmental challenges faced by Malaysian industries in adhering to industrial effluent regulations with the research question, what are the challenges in complying with environmental legislations from industries? It investigates the primary factors contributing to non-compliance and the perspectives, knowledge, and needs of Malaysian industries regarding environmental compliance. This study recommends the best strategy for promoting self-compliance. Thirteen stakeholders from various industries with environmental management experience were interviewed. Over the past seven years, these industries have shown low com-pliance with the Industrial Effluent Regulation 2009, prompting an exploration of their adaptability to regulations. Challenges identified include cost, employee attitudes, technology, management support, public complaints, and jurisdictional issues. Responses varied from divergent to unified viewpoints, highlighting the complexity of compliance issues. Respondents suggested enhancing compliance through behavioral changes, including incentives, enforcement, awareness, guidance, industry ratings, management commitment, and public disclosure of emissions. Suggestions for improvement and innovative solutions emerged based on participants' experiences, emphasizing the importance of continuous improvement. The study emphasizes the government's crucial role in ensuring regulation adherence but underscores the need for analyzing barriers and exploring alternative approaches. Understanding industry perspectives and strategies is essential for progress. Compliance, however, requires an analysis of the current challenges and adopting adaptive measures. It is important to understand industries' perspectives and strategies to move forward.

The growing threat of antibiotic pollution in water systems demands innovative and sustainable remediation strategies. Nanocellulose-based magnetic metal-organic frameworks (MOFs) represent a cutting-edge solution for the adsorption and removal of antibiotics, leveraging their high porosity, magnetic properties, and environmentally friendly nature. This paper provides an in-depth review of recent advancements in nanocellulose-based MOFs, focusing on their synthesis, adsorption mechanisms, and applications in environmental remediation between 2020 and 2024. By summarizing key studies, we highlight their performance in targeting widely used antibiotics such as tetracyclines and fluoroquinolones. The integration of nanocellulose with MOFs not only enhances adsorption capacity but also offers easy recovery, recyclability, and environmental compatibility. This review explores their adsorption mechanisms, practical applications, and future research directions, contributing to the advancement of scalable and sustainable water treatment technologies.

To better understand effects of agronomic practices on yield-nutrition relationships in wheat (Triticum aestivum L.) grains for Zn biofortification while improving yields simultaneously, effects of different soil fertilization and different drone-based foliar spraying treatments were investigated. The mixture of Zn or increasing N but simultaneously reducing P in compound fertilizers were all practical to increase grain yields and Zn concentrations in calcareous soils tested. However, the overall effects are limited, with a maximal yield increase by only 7.0% and a maximal increase of the grain Zn density from 19.4 to 27.0 mg/kg, which is far below the target biofortification value of 40-50 mg/kg. Unfortunately, there was a negative side effect, which decreased Fe and Mn concentrations and the Fe bioavailability. Notably, grain yields and Zn concentrations were significantly increased by drone-based foliar Zn sprayings from 7.5 to 8.6~8.8 t/ha by 12.0-17.3% and from 33.5 to 41.9~43.6 mg/kg by 25.1~30.1%, respectively, indicating a double-win in yield and nutrition. A spraying of ZnSO4·7H2O increased grain Zn concentrations and accumulation more so than ZnO, indicating the importance of chemical Zn forms in determining the effectiveness of foliar spraying. Moreover, foliar Zn sprayings simultaneously increased grain concentrations and accumulation of Fe, Mn and Cu, demonstrating multiple benefits. There were positive correlations between Zn and Fe, Mn or Cu, indicating synergistic but not antagonistic interactions. Compared to micronutrients, concentrations of grain macro- and medium nutrients (N, P, K, Ca, Mg) were less affected. Thus, a double-win in grain yields and micronutrient (particulaly for Zn) nutrition could be effectively achieved through appropriate soil fertilization and foliar Zn spraying. These results provide a better understanding of the yield-nutrition relationship among wheat grain yields, Zn and other nutrient elements for a better integrated manipulation to achieve a win-win situation in yield and nutrition.

Analysis of immediate effects of the COVID-19 pandemic on SMEs in Rwanda aims to assess and quantify the economic and financial impacts of the pandemic during the lockdown and presents options adopted by SMEs to reopen their business opera-tions. It also seeks to recommend options for sustainable and resilient economic recovery from the scars of COVID-19. This analysis used data collected from nearly 220 SMEs located across the country and applied an Exploratory Data Analysis (EDA) and multivariate linear regression models to measure the pandemic effects. The study revealed that firms downsized employment by 36.4 per cent, but data depict significant deviation within SMEs by their size. The COVID-19 pandemic has had a greater magni-tude of negative effects on sales levels among small businesses. Tax amounts were reduced amidst the crisis however, data do not show any significant variations among SMEs. Additionally, SMEs owners applied various coping mechanisms during re-opening. The study used firm-level data, providing detailed and reliable effects of the shocks on business performance. This analysis recommends establishing the medium-term financing and technical support for SMEs to ensure steady and sustainable recovery from pandemic effects as well as strengthening their resilience to any other socio-economics shocks.

Based on DFT (density functional theory) using B3LYP/6-31G method, theoretical investigations applied to demonstrate the structural, electronic properties and stability of (N,Nˊ-(1,4-phenylene)bis(1,8-naphthalimide)) is more stable than the compound (N-(4-amino phenyl)1,8-naphthalimide) by (-1.2762 eV or -29.4299 Kcal.mol-1) depending on the values of HOMO, synthesis reaction of imide is spontaneous and endothermic at temperature 275˚C according to the values of ∆rS, ∆rG and ∆rH.

Soluble inorganic pyrophosphatase (sPPase), a pyrophosphate hydrolase, has been shown to play an important role in several physiological processes such as plant growth and development, metabolic activities, and response to abiotic stresses, but sPPase has been less studied in woody plants. In order to preliminarily verify whether the soluble inorganic pyrophosphatase in Eucommia ulmoides Oliver (E. ulmoides) has a role in resistance to drought stress, we amplified the EuSIP5 (E. ulmoides soluble inorganic pyrophosphatase 5) cDNA sequence from E. ulmoides by RT-PCR. In order to study the drought resistance of the Eucommia ulmoides soluble inorganic pyrophosphatase 5 (EuSIP5) gene, the cDNA sequence of the EuSIP5 gene was amplified from Eucommia ulmoides Oliver by RT-PCR. Bioinformatic analysis indicated that EuSIP5 might be an unstable amphipathic protein, mainly located in the cytoplasm. E. ulmoides, the highest expression of the EuSIP5 gene was found in male leaves and pericarp from April to October, and in leaves of E. ulmoides in July and September. During drought, the expression of EuSIP5 in seedling E. ulmoides leaves was significantly higher than that of the control. An overexpression vector harboring the EuSIP5 was constructed and introduced into the tobacco (Nicotiana tabacum cv. Xanthi). We found that during drought stress, the appearance of wilting was delayed by 4 days in transgenic tobacco plants (OE) compared with wild type plants (WT), and the expression of drought-related genes DET2, CYP85A1, P5CS, ERF1 and F-box was found to be increased in transgenic tobacco leaves, as well as the enzyme activities of the protective enzymes: peroxidase (POD), superoxide dismutase (SOD) and catalase (CAT) were significantly higher than those of the WT, and the malondialdehyde (MDA) content was lower than the WT. These results indicated that the introduction of EuSIP5 gene into tobacco increased the expression of drought-related genes, enhanced the anti-membrane oxidation ability of tobacco, and reduced the oxidative stress damage, thus improving the drought resistance of tobacco.

Postprandial glucose levels between 4 and 7.9 hours (PPG4–7.9h) correlate with mortality from various diseases including hypertension, diabetes, cardiovascular disease, and cancer. This study aimed to assess if predicted PPG4–7.9h could diagnose diabetes. Two groups of participants were involved: Group 1 (4420 participants) had actual PPG4–7.9h, while Group 2 (8422 participants) lacked this measure but had all the diabetes diagnostic measures. Group 1 underwent multiple linear regression to predict PPG4–7.9h using 30 predictors, achieving accuracy within 11.1 mg/dL in 80% of the participants. Group 2 had PPG4–7.9h predicted using this model. Receiver operating characteristic curve analysis showed that predicted PPG4–7.9h could diagnose diabetes with an accuracy of 87.3% in Group 2, with a sensitivity of 75.1% and specificity of 84.1% at the optimal cutoff of 102.5 mg/dL. Simulation on 10,000 random samples from Group 2 revealed that 175 participants may be needed to investigate PPG4–7.9h as a diabetes diagnostic marker with a power of at least 80%. In conclusion, predicted PPG4–7.9h appears to be a promising diagnostic indicator for diabetes. Future studies seeking to ascertain its definitive diagnostic value might require a minimum sample size of 175 participants.

This paper relies on accounting-based measures of country risk to investigate U.S. global banks' exposure to foreign country risk over the 2017 fiscal year as measured by the sum of cross-border risk, foreign office risk, and derivative risk claims. We achieve this using panel linear modeling methods with country level heterogeneity and time fixed effects, along with a constructed panel data of 284 observations on 71 countries distributed across 6 world regional blocks, and observed over 4 consecutive quarters starting from 4th quarter 2016 and ending with 3rd quarter 2017. The results show that on average, over the four quarters, a 1% increase in foreign banking sector's claims significantly increases U.S. global banks cross border risk exposure by 0.34%, while reducing derivative risk exposure by 0.22%, but have no significant impact on foreign office risk exposure. Similar results are observed with public sector claims which significantly increase banks' exposure to cross border risk by 0.21%, while reducing derivative risk exposure by 0.19%. Conversely however, non-bank financial sector claims are found to have no significant affect on cross-border risk exposure, but significantly reduce foreign office risk exposure by 0.09%, while increasing derivative risk exposure by 0.06%. These results indicate the presence of sectoral heterogeneities in U.S. banks' exposure to foreign counterparties' risk, and also that overall, over the course of 2017 the level of U.S. global banks' cross-border risk exposure increased, while their level of derivative risk exposure decreased, and the level of foreign office risk exposure remained relatively unchanged.

In mining machines with friction discs, but also in multi-rope traction elevators, it is necessary to distribute the applied tensile load, generated by the weight of the cage and counterweight, evenly in all cross-sections of the load-bearing ropes. Hydraulic devices used for this purpose can operate on the principle of Pascal's law. The article presents a structural design, a 3D model and an implemented solution of a laboratory device capable of simulating a practical method of evenly distributing the total weight of the load into partial tensile forces of the same size acting on a selected number of load-bearing ropes. The laboratory equipment uses two pairs of three steel cables of finite length for the simulations. During the experimental measurements, tensile forces derived from the tractive force of the piston rods, pushed into the bodies of the hydraulic cylinders by the pressure of the hydraulic oil supplied through the pipeline under the pistons of the hydraulic cylinders, were detected. The resulting amount of hydraulic oil pressure in the hydraulic circuit influenced by different values of the hydraulic oil pressures in the hydraulic cylinders and by the pressure in the supply pipe was experimentally studied on the laboratory equipment. Simulations were also carried out in order to detect the hydraulic oil pressure in the hydraulic circuit caused by the change in the different magnitudes of the tensile forces in the ropes From the experiments carried out, it follows that with the appropriate choice of hydraulic elements and the design of the hydraulic circuit, the weight of the load, acting as the total pulling force in the ropes, can be evenly distributed (with a deviation of up to 5%) to all cross-sections of the load-bearing ropes. If the exact values of the hydraulic oil volumes under the pistons of all hydraulic cylinders are not known, it is not possible to calculate the pressure values in the hydraulic circuit when the valves of the hydraulic pipes are gradually opened.

Nature-Based Solutions (NBSs) can help to achieve multiple Water-Ecosystem-Food Nexus Do-main Objectives & Nexus Resilience Qualities, facilitating the transition to more resilient agrifood systems and providing an evidence base for a broader Nexus policy dialogue. This paper de-scribes the stepwise methodology developed in the EU-funded LENSES project to carry out a comprehensive analysis of NBSs in 6 pilot areas in 5 Mediterranean countries, and presents the results of NBSs implementation in 4 pilot areas, highlighting obstacles and opportunities. The methodology includes the development of an analytical evaluation framework and of a com-prehensive catalogue of Nexus-related NBSs, whose suitability needs to be assessed at the local level to achieve better use of protected/natural ecosystems, increase the sustainability and mul-tifunctionality of managed ecosystems and design and manage novel ecosystems. Subsequently, in a collective learning process which supported the operationalisation of the WEF Nexus, NBSs were identified that address specific contextual vulnerabilities, improve water distribution and enhance food security, while preserving ecosystems and supporting adaptation to climate change. The added value of the proposed methodology lies in the multi-stakeholder participatory approach to gain in-depth knowledge of local agri-food systems, including their main WEF-related challenges, and to facilitate overcoming barriers to NBS implementation.

This study explores the stability of electrodeposited copper catalysts utilized in electrochemical CO2 reduction (ECR) across various amine media. The focus is on understanding the influence of different amine types, corrosion ramifications, and the efficacy of pulse ECR methodologies. Employing a suite of electrochemical techniques including potentiodynamic polarization, linear resistance polarization, cyclic voltammetry, and chronopotentiometry, the investigation reveals useful insights. The findings show that among the tested amines, CO2-rich monoethanolamine (MEA) exhibits the highest corrosion rate. However, in most cases the rates remain within tolerable limits for ECR operations. Primary amines, notably monoethanolamine (MEA), show enhanced compatibility with ECR processes, attributable to their resistance against carbonate salt precipitation and sustained stability in potential over extended durations. Conversely, tertiary amines such as methyldiethanolamine (MDEA) present challenges due to the formation of carbonate salts during ECR, impeding their effective utilization. The study highlights the effectiveness of pulse ECR strategies in stabilizing ECR. A noticeable shift in cathodic potential and reduced deposit formation on the catalyst surface through periodic oxidation underscores the efficacy of such strategies. These findings offer insights for optimizing ECR in amine media, thereby providing promising pathways for advancements in CO2 emission reduction technologies.

(1) Background: Arrhythmia, or irregular heart rhythms, are a prevalent cardiovascular condition and can be diagnosed using electrocardiogram (ECG) signals. Advances in deep learning have enabled automated analysis of these signals. However, the effectiveness of deep learning models depends heavily on the quality of signal preprocessing. This study evaluates the impact of different windowing techniques applied to Fourier Transform-preprocessed ECG signals on the classification accuracy of deep learning models. (2) Methods: We applied three windowing techniques—Hamming, Hann, and Blackman—to transform ECG signals into the frequency domain. A 1D Convolutional Neural Network (CNN) was employed to classify the ECG signals into five arrhythmia categories based on features extracted from each windowed signal.(3) Results: The Blackman window yielded the highest classification accuracy, with improved signal-to-noise ratio and reduced spectral leakage compared to the Hamming and Hann windows. (4) Conclusions: The choice of windowing technique significantly influences the effectiveness of deep learning models in ECG classification. Future studies should explore additional preprocessing methods and their clinical applications.

This research aims to apply Artificial Intelligence (AI) methods, specifically Artificial Immune Systems (AIS), to design an optimal control strategy for a multivariable control plant. Two specific industrial control approaches are investigated: I-PD (Integral-Proportional Derivative) and PI-D (Proportional-Integral Derivative) control. The motivation for using these variations of PID controllers is that they are functionally implemented in modern industrial controllers, where they provide precise process control. The research results in a novel solution to the control synthesis problem for the industrial system. In particular, the research deals with the synthesis of I-P control for a two-loop system in the technological process of a distillation column. This synthesis is carried out using the AIS algorithm, which is the first application of this technique in this specific context. Methodological approaches are proposed to improve the performance of industrial multivariable control systems by effectively using optimization algorithms and establishing modified quality criteria. The numerical performance index ISE justifies the effectiveness of the AIS-based controllers in comparison with conventional PID controllers (ISE₁ = 1.865, ISE₂ = 1.56). The problem of synthesis of the multi-input multi-output (MIMO) control system is solved, considering the interconnections due to the decoupling procedure.

Energy resources are important sources of social and economic development, human survival and security. However, energy resources are objective and scarce, especially the fossil energy, such as coal, oil, natural gas, etc. Human survival environment is increasingly damaged, and the condition of energy is also gradually becoming deficient, so it is necessary to develop new energy resources to meet the increasing demand of material civilization. Solar energy can meet the needs of human development in the future as a kind of clean resource and it has been concerned by all countries in the world. We analyzed the effectiveness of subsidies to the PV industry of both the price and R&D by the spatial econometric model. In some region, the production capacity of photovoltaic industry has shown a significant spatial agglomeration situation in China since 2012. At the same time, benchmarking price and R&D subsidies played a positive incentive to the photovoltaic industry production capacity. It is a certain degree of inverse correlation between the scale of policy subsidies and the resource endowment of solar resources. Therefore, the countermeasures should be considered from the aspects of institutions, industry, technology and public financial policies.

Estimating ground surface PM2.5 with fine spatiotemporal resolution is a critical technique for exposure assessments in epidemiological studies of its health risks. Previous studies have utilized monitoring, satellite remote sensing or air quality modeling data to evaluate the spatiotemporal variations of PM2.5 concentrations, but such studies rarely combined these data simultaneously. We develop a three-stage model to fuse PM2.5 monitoring data, satellite-derived aerosol optical depth (AOD) and community multi-scale air quality (CMAQ) simulations together and apply it to estimate daily PM2.5 at a spatial resolution of 0.1˚ over China. Performance of the three-stage model is evaluated using a cross-validation (CV) method step by step. CV results show that the finally fused estimator of PM2.5 is in good agreement with the observational data (RMSE = 23.00 μg/m^3 and R2 = 0.72) and outperforms either AOD-retrieved PM2.5 (R2 = 0.62) or CMAQ simulations (R2 = 0.51). According to step-specific CVs, in data fusion, AOD-retrieved PM2.5 plays a key role to reduce mean bias, whereas CMAQ provides all-spacetime-covered predictions, which avoids sampling bias caused by non-random incompleteness in satellite-derived AOD. Our fused products are more capable than either CMAQ simulations or AOD-based estimates in characterizing the polluting procedure during haze episodes and thus can support both chronic and acute exposure assessments of ambient PM2.5. Based on the products, averaged concentration of annual exposure to PM2.5 was 55.75 μg/m3, while averaged count of polluted days (PM2.5 > 75 μg/m3) was 81, across China during 2014. Fused estimates will be publicly available for future health-related studies.

This scientific paper explores the increasingly widespread use of collaborative robots in the industrial environment, highlighting them as a solution to challenges related to the high costs of human labour and the associated management difficulties. The authors focus on the process of defining requirements for the implementation of collaborative robots, providing strategies based on mathematical management models. This approach translates into significant benefits for companies, such as cost reduction, quality improvement, and increased operational efficiency. Additionally, the paper proposes an innovative mathematical model for assessing total costs, budgeting, profitability, and electric power consumption associated with the operation of collaborative robots. This model allows for a comparison between the costs involved in using human labour and those associated with collaborative robots, providing critical information for technological investment decisions. The efficiency of this mathematical model is demonstrated through a practical application, where collaborative robots were integrated into a production environment, and costs and efficiency were evaluated compared to the use of human labour. This scientific paper provides a systematic and efficient approach to implementing collaborative robots in industrial processes, benefiting from strategies based on mathematical management models and an original mathematical model for evaluating performance and associated costs.

Sour waters are one of the main aqueous byproducts generated during petroleum refining and require processing in Sour Water Treatment Units (SWTUs) to remove contaminants such as H₂S and NH₃ in compliance with environmental legislations. Therefore, monitoring the composition of SWTU effluents, including acid gas, ammoniacal gas, and treated water, is essential. This study aims to present an AI (artificial intelligence) hybrid-based methodology to develop soft sensors capable of real-time prediction of H₂S and NH₃ mass fractions in the effluents of SWTUs and validate them using real data from industrial units. Initially, a new database based on the dynamic simulation of a two stripping columns SWTU phenomenological model, developed in Aspen Plus Dynamics® V10, was generated, aiming at non-faulty runs, unlike our previous work [1]. Ensemble methods (Decision Trees), such as Gradient Boosting and Random Forest, and Support Vector Machines were compared for soft sensor creation using these simulated data. The best outcome was the development of six soft sensors based on Random Forest with R² greater than 0.87, MAE less than 0.12, MSE less than 0.17, and RMSE less than 0.41. Variable importance analysis revealed that the temperature of the second stage of Column 1 significantly influences the thermodynamic equilibrium of H₂S and NH₃ separation from sour waters, being critical for five of the six soft sensors. After this initial stage using data from the phenomenological model, data from an industrial-scale SWTU were used to develop real soft sensors. The results proved the effectiveness of the conjugated use of physical model and industrial data approach in the development of soft sensor for two-column SWTUs.

Agriculture is an important sector of European Union in societal , economic and environmental dimensions. Sustainability of the sector require improvements in its key operations. Weeding is one of the crucial operation having impact on farms’ productivity, safety for farmers, food security and environmental state. To achieve EU policy goals of sustainable agriculture there are needed new technical and organizational solutions. One of the advanced techniques are laser based weeding technique. It is important to understand well the impacts of introduction of these tech-niques to the markets and agricultural practice in sustainability context. For that reason Social Life Cycle Assessment was performed. The method was based on participatory approach. The as-sessment was carried in three perspectives: general society, farmers, and business perspective re-lated to agriculture. Expert interviews based on questionnaires and workshops were realized to get the opinions on the impacts of a new laser technique on particular aspects of its implementation. The results show generally positive impact in all perspectives, especially in the perspective of farmers.

Innovation is an essential key factor in the technology development history. Past research on innovation focused more on the innovation behavior of technology, but seldom described knowledge assets which also influence innovation behavior greatly. The effect of knowledge assets attribute and result on disruptive innovation is therefore regarded as the research topic in this study, where disruptive innovation is divided into outbound and inbound to combine combination-embeddednessandmajor business specificityof knowledge assets as the research model. Manufacturing enterprises in China are proceeded the questionnaire survey, and 173 valid copies are collected. The empirical analysis shows that combination-embeddedness of knowledge assets presents significantly positive effects on major business specificity and outbound innovationof an enterprise but reveals remarkably negative effects on inbound innovation. Enterprises are suggested to constantly accumulate knowledge assets with low major business specificity before disruptive innovation in order to reduce ineffective inbound innovation.

The normal growth and development of skeletal muscle is essential for the health of the body. The regulation of skeletal muscle by intestinal microorganisms and their metabolites has been continuously revealed. Acetate is the predominant short-chain fatty acid synthesized by gut microbiota through the fermentation of dietary fiber, however, the underlying molecular mechanisms governing the interaction between acetate and skeletal muscle during rapid growth stage remain to be further elucidated; Here, specific pathogen-free (SPF) mice, germ-free (GF) mice, and germ-free mice supplemented with sodium acetate (GS) were used to evaluate the effects of acetate on skeletal muscle growth and development of young mice with gut microbiota deficiency; We found the concentration of serum acetate, body mass gain, succinate dehydrogenase activity and expression of myogenesis maker gene of skeletal muscle in the GS group was higher than GF group following sodium acetate supplement. Furthermore, the transcriptome analysis revealed that acetate activated biological processes regulating skeletal muscle growth and development in GF group that are inhibited due to gut microbiota deficiency. In vitro experiment, we proved that acetate up-regulated Gm16062 to promote skeletal muscle cell differentiation; Overall, our findings proved that acetate promote skeletal muscle growth and development in young mice via increase Gm16062 expression.

An analysis of the physical and chemical phenomena accompanying the electrical discharges was carried out, principal factors inactivating microorganisms is studied. Characteristic factors of an electric discharge in cavitation mode providing a synergistic effect when disinfecting water with a discharge and chemical reagents are identified in order of importance. As a result of the integral action of cavitation, the inactivation of bacteria is intensified both due to the emergence of chem-ically active particles and due to local shock waves, acoustic currents and ultraviolet radiation in the area of cavitating bubbles. The similarity of cavitation processes in water systems implemented by underwater electric discharges and with the ultrasound has been experimentally proved. The main advantage of electric discharge cavitation in comparison with ultrasonic one is the wide band of ultrasonic frequencies of radiation inherent in electric discharge, high intensity and power of cav-itation processes, and, accordingly, the possibility of a significant increase in the volume of the disinfected liquid. The study enable better understanding and prediction of the effects that occur during a high-voltage underwater electrical discharge and have a bactericidal effect.

Currently, urban renewal activities in China are booming. And promoting the renovation of public buildings is the key due to its large scale, high cost and significant impact to the nature and social environment. To reduce the ambiguity and uncertainty in evaluating the potential for renewal of existing public buildings, a renewal potential evaluation model combining game theory combination weighting method and cloud model theory is proposed. The paper constructs a comprehensive evaluation index system based on relevant standards and literature. Game theory is used to optimize the weights obtained by AHP and entropy weight methods to obtain a combined weight. MATLAB programming is used to calculate the comprehensive cloud parameters of the evaluation index for the potential renewal of existing public buildings and therefore generate cloud Graphs. Through case study in Nanjing of China, it has been demonstrated that the combination empowerment cloud model can objectively reflect the relationship between the fuzziness and randomness of evaluation indicators for public building renewal potential. The expression of cloud Graphs can intuitively reflect the magnitude of renewal and renovation potential and the degree of uncertainty in evaluation results. The research result provides useful references for the sustainable utilization of building resources in the era of building.

Under the development mode of deep blending of emerging technologies, major projects are important for enhancing China's comprehensive national strength and independent innovation capability. Based on the social benefits of major projects, and considering the influence of reputation factors, an evolutionary game model composed of a general contractor and subcontractor of major projects is established. This paper studies the influence of various factors including the income distribution coefficient of collaborative innovation, and MATLAB simulation software is analyzed the influence of factors on an evolutionary path. The results show that a reasonable income distribution coefficient can promote the game behavior of both parties to the direction of active collaborative innovation; The reduction of innovation cost and the improvement of spillover technology absorption capacity can make innovation subjects tend to choose active collaborative innovation strategies. In addition, reputation loss above a specific threshold can effectively inhibit free-riding behavior and encourage innovation subjects to choose active collaborative innovation strategies. The research results provide reference for promoting major projects' technology innovation.

The goal of newborn screening is to improve health outcomes by identifying and treating affected newborns. This manuscript provides an overview of a data tool to facilitate the longitudinal collection of health information on newborns diagnosed with a condition through NBS. The Newborn Screening Translational Research Network (NBSTRN) developed the Longitudinal Pediatric Data Resource (LPDR) to capture, store, analyze, visualize, and share genomic and phenotypic data over the lifespan of NBS identified newborns to facilitate understanding of genetic disease, and to assess the impact of early identification and treatment. NBSTRN developed a consensus-based process using clinical care experts to create, maintain, and evolve question and answer sets organized into common data elements (CDEs). The LPDR contains 24,172 core and disease-specific CDEs for 118 rare genetic diseases, and the CDEs are being made available through the NIH CDE Repository. The number of CDEs for each condition average of 2,200 with a range from 69 to 7,944. The LPDR is used by state NBS programs, clinical researchers, and community-based organizations. Case level, de-identified data sets are available for secondary research and data mining. The development of the LPDR for longitudinal data gathering, sharing, and analysis supports research and facilitates the translation of new discoveries into clinical practice.

Abstract: In the present study, we investigated to what extent the soybean has been used in in-dustrial and homemade sausage produced in Kosovo, as well as its potential impact on the fatty acid profile. In total, 63 samples, 42 industrial and 21 traditional sausages, were collected either from the market or the production site. All samples were tested by means of real-time PCR for the detection and quantification of soy content, as well as the GC-FID to determine the potential re-flection in the fatty acid profile. The presence of soy DNA was detected in 54 out of 63 samples. 41 out of 42 industrial sausage samples were positive for soy DNA, with an average ct value of 22.60 and a standard deviation (SD) of 4.28, whereas 13 out of 21 traditional sausage samples were positive for soy DNA, with a mean ct value of 23.36 and a standard deviation (SD) of 4.56. There was a statistically significant difference in means between industrial sausage and traditional sausage, p≤0.001 based on CT values (ANOVA test). We investigated the correlation between ct values in real-time PCR for soy DNA with each fatty acid content. There is a moderate correlation of soy DNA ct values with C16:0 palmitin (decrease), C18:0 stearic acid (decrease), C18:1 oleic acid (in-crease), and overall saturated fatty acids (decrease). With the exception of C14:0 Myristin, C18:1 Oleic, and C20:0 Arachin acids and monosaturated fats, the ANOVA test reveals a significant dif-ference in means between groups for the majority of the fatty acids between industrial sausages and traditional sausages. The current study demonstrates that the fatty acid composition of sau-sages is influenced by the amount of soy present in them. The extent to which other components affect the fatty acid profile is unknown. However, an increase in oleic acid and a decrease in stearic and overall saturated fatty acids are expected.

Increased norepinephrine (NE) release from the sympathetic nerves during pregnancy in women or animal models, as occurs during stress, modifies the fetal environment and increases flow of NE to the fetus, programing the progeny and affecting its cardiovascular and metabolic function in adulthood. In the present work, gestating rats were exposed to stress during gestation and the female progeny was analyzed for heart and metabolic function. Pregnant Sprague–Dawley rats were exposed to cold stress (4 °C/3 h/day); rats’ female progeny were euthanized at 4, 20 and 60 days old and their hearts evaluated to determine the β-adrenergic receptor (βAR) mRNA, abundance and affinity to agonists and NE concentration. The in vivo response to glucose overload and the arterial pressure response to isoproterenol (ISO, 125 µg/kg weight/day/10 days) were monitored. Results: At 20 and 60 days old, stressed female progeny presented an increase in ventricular weight and no changes in the cardiac NE as compared with their age-matched controls. The β1AR mRNA in control rats decreased between 4 and 20 days of age, but stressed rats maintained 50% higher levels of mRNA as compared with their age-matched controls. This difference was also found in the protein abundance of β1AR. No differences were found at 60 days old. The β2AR mRNA levels were higher than in controls at both 4 and 20 days old, but not expressed in the amount of protein. An increase in the ratio of β1/β2 receptors was found at 20 days old but not at 60 days old. The displacement of 3H-dihydroalprenolol (DHA) from a membrane fraction with propranolol (β antagonist) showed decreased affinity (at 60 days old) but no changes in the βAR number. In vivo exposure to ISO induced a β-adrenergic overload and provoked death in 40% of stressed females by day 3 of ISO treatment. Regarding metabolic function, we found that stressed rats presented insulin resistance when adults. These data suggest permanent changes to the heart’s adrenergic response and metabolic function after rat progeny were stressed in the uterus.

This paper undertakes a comprehensive review to underscore the central role of sustainability in the evaluation and innovation of jet grouting technologies. It meticulously traces the evolution of evaluation methodologies, emphasizing the imperative of sustainable practices throughout history. Traditional evaluation paradigms are examined alongside contemporary trends, with a particular focus on sustainability metrics and visualization techniques. Through an examination of innovative jet grouting technologies, this paper illustrates how sustainability principles have driven advancements aimed at improving the efficiency and environmental impact of jet grouting methods. Central to this review is an assessment of sustainability across multiple dimensions, including method applicability, installation and operational compatibility, and the performance of the resulting jet grouted piles. By emphasizing sustainability considerations, the paper highlights the intrinsic link between environmental integrity and technological innovation in the field of jet grouting. In addition, it discusses analytical evaluation methods designed to proactively address sustainability concerns prior to construction, thereby promoting a more environmentally responsible approach. Finally, this paper presents a pioneering evaluation framework that integrates real-time monitoring and visualization tools, allowing stakeholders to track sustainability milestones throughout the construction process. By emphasizing sustainability as a guiding principle, this review advocates for a paradigm shift toward more ecologically sound and resilient jet grouting practices.

Chronic wounds remain a major challenge in healthcare, with conventional dressings often leading to infections and lacking advanced healing capabilities. This study evaluated the wound healing potential of NIMO-CH, a cellulose hydrogel derived from nipa fronds and enriched with indigenous microorganisms, particularly Lacticaseibacillus paracasei BCRC-16100. Using ICR mice with excisional wounds, three treatments were compared: no treatment, NIMO-CH, and DuoDERM. Results showed that NIMO-CH and DuoDERM both achieved 100% wound closure, with NIMO-CH-treated wounds showing complete healing with hair growth by day 18-20, while untreated wounds healed by day 20. Minimal scarring was observed in both NIMO-CH and DuoDERM groups. Histological analysis confirmed similar healing processes, including granulation tissue formation and moderate inflammatory responses, with no significant differences in collagen fiber orientation. Furthermore, genome sequencing revealed that Lacticaseibacillus paracasei BCRC-16100 contained genes sodA and gsiC, responsible for coding enzymes necessary for the wound healing process. These results suggest that NIMO-CH could be an effective alternative for wound care applications.

Bacterial infections pose a serious threat to human health, and the overuse of antibiotics has led to the rise of multidrug-resistant bacteria. Numerous current wound dressings, which may cause skin irritation or allergies are insufficient in handling large wounds, often leading to infections. This highlights the need for better antibacterial materials. Nypa fruticans (Nipa palm), native to Southeast Asia, has long been utilized for various purposes because of its multiple benefits such as its antimicrobial properties, presence of probiotics, and high cellulose content. This study evaluates the use of cellulose hydrogel from nipa fronds, loaded with probiotics (ProbioGel), as an antimicrobial agent to prevent infections. The study involved an in-vitro assay using the Kirby-Bauer method to evaluate the gel’s antimicrobial properties against common wound pathogens. Additionally, whole genome sequencing and promoter analysis were done to identify genes supporting their biochemical properties. The results showed ProbioGel exhibited significant antimicrobial activity against Staphylococcus aureus, Escherichia coli, Staphylococcus epidermidis, and Candida albicans due to the presence of genes encoding lysozyme, carnobacteriocin B2, and fatty acid ABC transporter ATP binding in the Lacticaseibacillus paracasei BCRC-16100. This study highlighted the potential of ProbioGel as an innovative and effective antimicrobial and anti-infection agent for wound care. The discovery of genes in the probiotic strain responsible for encoding antimicrobial peptides further supports its therapeutic potential.

The editorial explores the realm of emerging translational research in neurology and psychiatry, providing insights into various subjects, including neurodegenerative disorders and innovative therapeutic methods. The main objective is to study neurological and psychiatric disorders, such as Alzheimer's disease, with a particular emphasis on techniques for neural regeneration and repair. The editorial highlights the importance of taking a comprehensive approach to studying and treating complex neurological and psychiatric conditions. This involves thoroughly reviewing research papers on the causes, development, biomarkers, and treatment options for these conditions. The editorial emphasizes the necessity of using multidisciplinary and integrative methods to gain a deeper understanding and improve the treatment of these conditions. The development of an animal model for recurrent primary dysmenorrhea showcases the innovative techniques employed in the investigation of gynecological disorders, illustrating the capacity of translational research to connect fundamental scientific knowledge with practical medical applications. The cooperative endeavors of researchers and clinicians emphasized in this editorial lay the foundation for revolutionary advancements that hold the potential to enhance outcomes for individuals afflicted with neurological and psychiatric disorders globally.

: Background. Delivering bad news is a sensitive and challenging aspect of nursing healthcare, requiring a holistic approach that respects patients' preferences, cultural values, and religious beliefs to promote adaptation to the state's health. Aim: map the evidence of the dimensions present in the communication and management of bad news by nurses, with the person in a palliative situation, their caregivers, and family members. Methods: Based on Joanna Briggs Institute methodology, the search was conducted through MEDLINE Complete (EBSCOhost), CINAHL Complete (EBSCOhost), SciELO, and Open Access Scientific Repository in Portugal. From a total of 756 articles, 14 were included, published between 2018 and 2023. Results: Structure components in bad news are influenced by the characteristics of the palliative patients, their caregivers, family members; nurses; and the organizational environment. Promoting the quality of the communication process is desirable through continuous and advanced training in end-of-life; training in bad news; religiously and culturally sensitive nursing interventions centered on hope and maintaining faith; emotional management; and utilization of a checklist protocol. Conclusions: Honest communication allows people to actively participate in the decision-making process and in the trajectory of the care plan that is focused on themselves and their preferences, which has outcomes in functional capacity and readaptation.

Pepper leaf segmentation plays a crucial role in monitoring pepper leaf diseases in various backgrounds and ensuring the healthy growth of peppers. However, existing transformer-based segmentation methods suffer from computational inefficiency, excessive parameterization, and limited utilization of edge information. To tackle these challenges, we propose an adaptive multi-scale MLP framework, named AMS-MLP, which combines the multi-path aggregation module (MPAM) and the multi-scale context relation mask module (MCRD) to refine the object boundaries in pepper leaf segmentation. AMS-MLP consists of an encoder-based network, an adaptive multi-scale MLP (AM-MLP) module, and a decoder network. In the encoder network, the MPAM module effectively fuses five-scale features to generate a single-channel mask, improving the accuracy of pepper leaf boundary extraction. The AM-MLP module divides the input features into two branches: the global multi-scale MLP branch captures long-range dependencies between image information, while the local multi-scale MLP branch focuses on extracting local feature maps. Adaptive attention mechanism is designed to dynamically adjust the weights of global and local features. The decoder network incorporates the MCRD module into the convolutional layer, enhancing the extraction of boundary features. To verify the performance of the proposed method, we conducted extensive experiments on three pepper leaf datasets with different backgrounds. The results demonstrate mIoU scores of 97.39%, 96.91%, and 97.91%, as well as F1 scores of 98.29%, 97.86%, and 98.51%, respectively. Comparative analysis with U-Net and state-of-the-art models reveals that the proposed method dramatically improves the accuracy and efficiency of pepper leaf image segmentation.

A good approximation for the distribution of an estimate, is vital for statistical inference. Here we give Edgeworth expansions for the conditional density and the conditional distribution of any multivariate standard estimate.

Involving industrial waste into economic circulation, in particular flotation waste from coal enrichment, is an urgent task. The coal preparation waste of ArcelorMittal Temirtau JSC was studied with a view to the possibility of using it as an alternative substitute for coke breeze in the sintering process. During a thermoanalytical study on a synchronous thermal analyzer STA 449 NETZSCH in dynamic mode with a heating rate of 10, 20, 30 °C/min in an air flow of 30 cm³/min in the temperature range 30–1000 °C, we determined the lower heat of combustion of carbon-containing material, change mass during calcination, change and rate of change in the mass of the sample, thermal effect of the process, the temperature of the beginning, end and maximum development of thermal effects. It has been established that the greatest mass loss is observed in the temperature range 580 °C- 610 °C, which is about 65–67% of the total mass of the organic component of coal. The maximum burnout rate corresponds to a temperature of 540–563 °C. The lowest calorific value of the studied waste was 15.9 MJ/kg. The results of thermal analytical research and technical analysis substantiate the possibility of using flotation waste in a mixture of up to 10% with coke breeze for combustion in the sintering layer for the production of sinter. Analysis of the composition of flotation waste showed that they have a high specific surface area (56.8∙10³ m²/kg), are highly dispersible, soggy, and capable of swelling, and the predominant amount of clay substance makes them a plastic material. The possibilities of using coal flotation waste as an alternative substitute for coke breeze have been studied after the regimes of its preparation for sintering have been developed and a rational regime of layer-by-layer combustion in the sintering layer has been established. The optimal ratio of coke and OPC in the fuel mixture of the sintering charge was determined.

Personal protective equipment (P PE) rules must be respected and followed to the letter of healthcare professionals in Cameroon to avoid the transmission of infectious diseases. This research proposes solutions to the problems of non-adherence and non-compliance among healthcare workers in Cameroon towards PPE rules. Inadequate access to suitable PPE, discomfort when wearing PPE during poor quality, and a lack of training on correct PPE use are just a few of these obstacles amongst HCWs in Cameroon. Hospitals and healthcare facilities should prioritize offering thorough instruction on PPE use and pinpoint the need to adhere consistently to PPE rules to remove these obstacles. They should also ensure that all healthcare personnel have access to and a sufficient supply of the proper PPE. Through the organization of impromptu visits by surveillance teams to identify areas of support and training, there is a need for assistance from government bodies and public health groups in creating awareness of the security value of PPE use among healthcare professionals. There is a lack of PPE in health care settings in rural areas in Cameroon, thus a need for an adequate supply. Then can we put appropriate PPE policies and practices for HCWs in Cameroon, as they will keep to it.Healthcare professionals in Cameroon must comprehend that following PPE standards protects not just their selves from diseases but also their patients, coworkers, and communities. We are accountable for ensuring everyone's safety and well-being, and adhering to PPE regulations is an essential first step.

The new digital infrastructure has become an important basis for the green development of agriculture. This paper selects provincial sample data from 2006 to 2022, constructs an indicator system to measure new digital infrastructure and agricultural green total factor productivity, and explores how new digital infrastructure can promote agricultural green development. The results show that: (1) the new digital infrastructure has a significant role in promoting the green development of agriculture, and this conclusion is still valid after processing endogeneity and heteroscedasticity; (2) Technology and land factors play an intermediary role in the promotion of green agricultural development by the new digital infrastructure, that is, the new digital infrastructure helps to improve the quality and technical level of cultivated land and thus promote green agricultural development; (3) Labor force factors optimize the mediating role of technology factors, that is, the higher the quality of labor force, the stronger the role of the new digital infrastructure in promoting the green development of agriculture through the technological path; (4) The effect of new digital infrastructure on the green development of agriculture is obviously heterogeneous, and the effect is more obvious in northwest China and the regions with lower marketization level, higher environmental regulation level. This study is helpful to clarify the relationship between new digital infrastructure and agricultural green development in China, and provide corresponding policy suggestions for promoting regional agricultural green development.

The rapid advancements in the Fourth Industrial Revolution and artificial intelligence (AI) necessitate a transformative approach to leadership in higher education. This paper investigates the current state of leadership in Iraqi universities and proposes strategies to enhance leadership capabilities aligned with technological advancements. Through a comprehensive review of existing literature, qualitative analysis, and quantitative data collection, the study identifies key challenges and opportunities for developing effective university leadership. The findings underscore the importance of strategic human resource management, high-performance work systems, and technological integration in fostering leadership excellence. Practical recommendations for policymakers and educational leaders in Iraq are provided, highlighting the need for strategic investments in leadership development to meet the demands of the evolving educational landscape.

High quantities of biomass produced in greenhouses create environmental problems, as this side stream and its downgraded products are not further used in the production cycle. The aim of our research was the identification and semi-quantification of molecules extracted from vegetative tomato plant residues with sustainable green alternative solvents using vacuum-assisted soxhlet and solid-liquid extraction to evaluate the possibilities for high-value applications. To identify compounds, GC-MS analysis, and the Folin-Cioalteau method was used. In sum, 285 different compounds have been assigned to 383 detected peaks using GC-MS analysis. The solvents 2-MTHF and ethyl acetate, compared to ethanol and hexane, provided better results with a maximum number of 99 ± 8.83 compounds, a maximum total concentration of 5,894.82 ± 586.48 and 3,363.02 ± 71.14 mg NEQ kgdw-1 and a total phenolic content of 2,143.25 ± 155.17 and 1,605.92 ± 66.46 mg GAE kgdw-1, respectively. With 781.2 ± 112.66 and 718.25 ± 54.89 mg NEQ kgdw-1 the compound neophytadiene was the most common terpene in ethyl acetate and 2-MTHF extracts, respectively. It can be concluded that vegetative tomato plant residues contain a high variety of bioactive molecules. Green solvents, such as 2-MTHF and ethyl acetate, enhance the extraction of these molecules from the solid matrix.

Biofilm formation in unicellular eukaryotes, such as Candida albicans and Saccharomyces cerevisiae, represents a significant challenge in various sectors, including healthcare, agriculture, and industry. These biofilms are resistant to conventional antimicrobial treatments due to their protective extracellular matrix and complex regulatory mechanisms, such as quorum sensing (QS) and cyclic AMP (cAMP) signaling. Recent advances in the understanding of biofilm formation pathways have led to the identification of novel compounds that target these regulatory mechanisms. This review highlights breakthroughs from 2024 research, focusing on the inhibition of quorum sensing, disruption of extracellular matrix synthesis, and transcriptional/post-transcriptional regulation of biofilm-related genes. The application of these discoveries in Vietnam is particularly promising, given the country's challenges with biofilm-related infections in healthcare and productivity losses in agriculture and aquaculture. Natural product-based approaches, especially those derived from Vietnam's marine biodiversity, offer environmentally sustainable solutions for biofilm control. However, translating these laboratory findings into scalable, cost-effective applications faces challenges such as resistance development, environmental sustainability, and regulatory constraints. This review provides a comprehensive overview of compounds targeting biofilm regulatory mechanisms, evaluates their potential applications in Vietnam, and discusses future research directions, emphasizing the need for interdisciplinary collaboration to address the complexities of biofilm control.

EIMIs face the challenge of adapting to the Paris Agreement and the European Green Deal to achieve carbon neutrality. This change is being driven by consumer interest in low-carbon products, regulatory requirements from climate agreements and investors prioritizing sustainability. This pressure is pushing companies to go beyond short-term financial gains and integrate sustainability into their business. The growing awareness of the environmental impact of business models (BM) has fueled the development of Sustainable Business Models (SBMs). This study aims to link the discussion on the role of SBMs in the drivers of decarbonization, to improve the understanding of how the drivers can be integrated and enable new BMs for EIMIs. Based on a structured literature review, semi-structured interviews were conducted in the EIMIs. The study identifies BM-components that are influenced by these drivers and require sustainable business model innovation (SBMI). The results show that decarbonization drivers have a significant impact on all BM components. Experts emphasize the importance of collaborative approaches and cooperation throughout the value chain. This research elaborates on the importance of systematic analysis to understand how companies can effectively manage decarbonization drivers and suggests in-depth exploration within BM-research to uncover potential SBM design options.

This study aims to propose a method for constructing basic digital twin data in South Korea by adhering to international standards and utilizing publicly available data. Specifically, the study focuses on designing and proposing a digital twin data model for buildings, which are the most applicable among the basic digital twin data. To achieve this, the first section provides essential background information, introduces concepts and requirements related to digital twin basic data, and offers a brief overview of CityGML. The second section explains the methodology and data used in this study. The third section presents the main findings: the selection of public data (buildings) for constructing digital twin basic data, the mapping process using CityGML, and the creation of UML diagrams. The fourth section discusses these findings. Finally, the conclusion and suggestions for future research are provided. This approach enhances the accuracy of building-related digital twin data and supports the use of digital twin services in both public and private sectors by enabling various spatial analyses.

This paper analyses the application of deep learning techniques for predicting wave overtopping events in port environments using sea state and weather forecasts as inputs. The study was conducted in the outer port of Punta Langosteira, A Coruña, Spain. A video recording infrastructure was installed to monitor overtopping events from 2015 to 2022, identifying 3709 overtopping events. The data collected was merged with actual and predicted data for the sea state and weather conditions during the overtopping events, creating three datasets. We used these datasets to create several machine learning models to predict whether an overtopping event would occur based on sea state and weather conditions. The final models achieved a high accuracy level during the training and testing stages: 0.81, 0.73, and 0.84 average accuracy during training and 0.67, 0.48, and 0.86 average accuracy during testing, respectively. The results of this study have significant implications for port safety and efficiency, as wave overtopping events can cause disruptions and potential damage. Using deep learning techniques for overtopping prediction can help port managers take preventative measures and optimize operations, ultimately improving safety and helping to minimize the economic impact that overtopping events have on the port's activities.

This study involved a comprehensive examination of sensory attributes in Bísaro dry-cured loins, including odor, androsterone, scatol, color, fat color, hardness, juiciness, chewiness, flavor intensity, and flavor persistence. Analysis of 40 samples revealed a wide variation in these attributes, ensuring a robust margin for multivariate calibration purposes. The respective near-infrared (NIR) spectra unveil distinct peaks associated with significant components such as protein, lipid, and water. Support Vector Regression (SVR) models were methodically calibrated for all sensory attributes, with optimal results using multiplicative scattering correction pre-treatment, MinMax normalization, and radial base kernel (non-linear SVR model). The predictive models exhibited acceptable results, characterized by R-squared values close to 1 (0.9616 - 0.9955) and low RMSE values (0.0400 – 0.1031). The prediction set's relative standard deviation (RSD) remained under 5%. Comparisons with prior research revealed significant improvements in prediction accuracy, particularly when considering attributes like pig aroma, hardness, fat color, and flavor intensity. This research underscores the potential of advanced analytical techniques to improve the precision of sensory evaluations in food quality assessment.

— Big Data analytics has come a long way since its inception. This field is growing day by day. With the advent of large handling capacity of computational analysis of modern computing systems as well as Internet of Things (IoT), this field has revolutionized the way we think about data. It has influenced the major domains such as healthcare, automobile, computing, climatology, and space communications. Of late, the health care sector has been largely influenced by this. This communication deals with the areas of healthcare where big data analytics has been largely influential. Encompassing the basics of Big Data Analytics (BDA) driven by IoT, the applications of it in healthcare sector are outlined, accompanied by future expectations. Additionally, it also presents a comprehensive analysis of recent application with special reference to Covid-19 in this sector.

Blockchain technology (BCT) has the potential for sustainable development, enhancing business efficiency, reducing costs, and strengthening data security. Despite its potential, adoption among small and medium-sized enterprises (SMEs) is low due to the need for significant changes in technology infrastructure and the challenge of interoperability. A cross-sectional survey was done with 226 Hong Kong SMEs. The PLS-SEM results highlighted favorable transformation conditions as the most critical factor for SMEs considering the adoption of BCT. These conditions address both internal and external readiness for adopting the disruptive strategy. Other contributing factors to BCT adoption include trust in BCT developers, perceived usefulness and ease of use, government support, and perceived security. The research results contributed to the literature on disruptive technology acceptance, adoption, transformation conditions, technology readiness, and SMEs’ technology adoption. Government-supported policies and initiatives can promote BCT adoption, including educational programs, case studies, and resources for readiness. Financial support and regulatory frameworks can further encourage adoption. BCT developers can demonstrate the value of their systems, effectively communicate potential ROI and cost savings, and provide user-friendly interfaces to increase SMEs’ intention to adopt BCT.

This paper contributes to the debate on the impact of economic diversity and the resource curse on economic growth. We use dynamic panel data models on data on Canadian and US sub-national jurisdictions. We find evidence for a positive relationship between diversity and growth. Based on the Krugman Specialization Index, our analysis shows that the required threshold for not having the resource curse is 0.209. Above this threshold, the marginal contribution of natural resources to economic growth is lower for a more diversified regional economy than a less diversified one. We highlight the policy implications of these findings.

(1) Background: With the global population aging, the demand for effective rehabilitation products for the elderly is increasing. Traditional products often fail to meet the comprehensive needs of elderly users, who require solutions addressing physical, psychological, and social aspects; (2) Methods: Using the Analytic Hierarchy Process, Quality Function Deployment, Axiomatic Design, and the System Usability Scale to identify and prioritize user needs, market research and user interviews were conducted to understand the preferences of the elderly and obtain design specifications. The focus was on multimodal sensory feedback, which was validated through the study; (3) Results: Elderly users have a strong preference for rehabilitation products that are durable, easy to use and have comprehensive sensory feedback. Intelligent rehabilitation bed as the carrier, strengthened structure, high strength material, ergonomic adjustment, integrated health monitoring system. Using digital technology for real-time health monitoring and personalized feedback to provide a comprehensive recovery experience, high user satisfaction was reported in the evaluation; (4) Conclusion: It is important to emphasize user-centered design and integrate multi-modal sensory feedback to meet the comprehensive rehabilitation needs of elderly users. Future studies should expand user samples and expert opinions to refine and validate the design and improve its effectiveness and usability.

Since the beginning of the internet era, there has been an explosion of growth in structured data (such as numbers, symbols, and labels) as well as unstructured data (including images, videos, and text). Efficient and accurate mixed query of these two types of data is a key technology to achieve high-quality information retrieval, and it is also a major challenge that needs to be solved urgently in the industry. In this study, we employ an advanced Transformer model that combines strategies and fine-tuning techniques for multi-task learning. Specifically, the model is first pre-trained on a large-scale, general-purpose dataset to learn different types of data representations and basic language comprehension skills. After that, we fine-tuned the parameters of the model to better suit these specific data processing tasks for specific application scenarios, such as image annotation, video content analysis, and structured data query. At the heart of the model is the self-attention mechanism, which allows the model to automatically emphasize the important parts and ignore irrelevant information when processing the input data. In addition, we have introduced task-specific adaptation layers that are designed to add additional processing power to the original Transformer architecture, such as a semantic analysis layer for unstructured text data and a relational extraction layer for structured data. This combination of general pre-training and task-specific fine-tuning allows the model to flexibly process and integrate information from different data sources, improving processing efficiency and accuracy. Experimental results show that the model performs well in a variety of data processing tasks, significantly improves the accuracy and efficiency of information retrieval, and verifies the strong potential and adaptability of large language models in processing mixed data types.

Neurotensin (NT) is a peptide involved in digestion, neuromodulation, and cancer progression. NT and its receptors (NTR1 and SORT1 mainly) have been widely studied in oncology. Data show NT expression is under the control of sex steroid hormones, in particular estradiol. We focused on its involvement in three main female hormone-sensitive cancers: breast, ovarian, and endometrial cancer in a narrative review. NT, NTR1 and SORT1 are mostly expressed in these three cancers and their involvement in oncologic processes such as proliferation and invasion seems to match, as does their impact on prognosis for most. The development of NT receptor-targeted therapies, including theranostics and radioligand treatments, presents a promising avenue for personalized cancer treatment.

Monitoring of clients living with HIV encompasses a specific array of activities that routinely check on various aspects of ART following its initiation depending on the availability of resources in that particular state, among other factors as per guidelines from the World Health Organisation. This is a significant practice as it promotes positive health outcomes for patients and efficient utilisation of ART regimens to reduce resistance to the medication – hence it is a measure to guard avoidable costs. It also forms a basis on which decisions are made from. It can be done clinically by assessing for signs e.g., skin rash and symptoms e.g., nausea and vomiting, checking vital organ function and measuring weights across all populations, or can be also be done by assessing specimens for their respective viral loads, white blood cell count, pregnancy status or other infections such as hepatitis B. There have not been any special indications required for one to be eligible for monitoring during ART in developing countries; all qualify for routine monitoring even though some may be more frequent than others in cases of comorbidities such as renal failure where medications can be attributed to exacerbating the condition.

This research project aimed to address the growing concern about methane emissions from seaweed by developing a Convolutional Neural Network (CNN) model capable of accurately predicting these emissions. The study used PANDAS to read and analyze the dataset, incorporating statistical measures like mean, median, and standard deviation to understand the dataset. The CNN model was trained using the ReLU activation function and mean absolute error as the loss function. Model performance was evaluated through MAPE graphs, comparing the mean absolute percentage error (MAPE) between training and validation sets and between true and predicted emissions, and analyzing trends in yearly greenhouse gas emissions. The results demonstrated that the CNN model achieved a high level of accuracy in predicting methane emissions, with a low MAPE between the expected and actual values. This approach should enhance our understanding of methane emissions from Sargassum, contributing to more accurate environmental impact assessments and effective mitigation strategies.

This study investigates the fixed-time consensus-based attitude control problem for large telescope on-orbit construction subject to discrete-time communication, unknown tiny disturbance torque, model uncertainty, and actuator saturation under an undirected communication graph. Motivated by the need to save wireless communication resources, the communication scheme was designed to exploit interference, which can save communication resources in proportion to the number of modular unit mirrors. Then, a fixed-time observer with discrete-time communication was proposed, which also handles the unknown channel attenuation problem when exploiting information interference. Moreover, based on the backstepping procedure and the suitably defined adaptive compensation law, the fixed-time attitude consensus control law was proposed to handle unknown tiny disturbance torque, model uncertainty, and actuator saturation. Finally, comparative simulation results were provided to verify the effectiveness of the fixed-time observer and proposed fixed-time control law.

Traumatic Brain Injury represents a significant public health concern due to its role in traumatic death and disability, often caused by head impacts or rapid accelerations. Despite advancements in Finite Element Head Models, existing models primarily represent adult males, neglecting anatomical and physiological differences between genders and age groups. Additionally, the mechanistic roles of specific intracranial tissues, such as the dura mater, have conventionally been overlooked. To better understand the mechanical behavior of the brain and its injured regions in the context of TBI, including the dura mater, this study proposes the development of a Female Finite Element Head Model. This model, representative of a middle-aged female subject, was developed using medical image-derived geometry and finite element modeling techniques. The validation results demonstrate a similarity between the numerical displacement curves and those obtained experimentally. In the model with dura mater, the numerical results show analogous behavior to the experimental results, despite minimal variations in the amplitude of the curves. These advancements highlight the significance of including the dura mater in biomechanical brain modeling. Incorporating the dura mater in Finite Element Head Models produces more realistic results than models without it. This emphasizes the importance of enhancing biomechanical models to better represent anatomical complexity.

A high intake of carbohydrates, associated with obesity, is one of the major causes of fatty liver disease in humans. This study investigated how high carbohydrate intake induces fatty liver disease in Blunt snout bream (Megalobrama amblycephala). Blunt snout bream were fed a high-carbohydrate diet (HCBD) for 60 days. Their growth indices were evaluated, and the transcriptomes, metabolites, biochemistry, and histology of their blood and livers were analyzed. The final weight, weight gain, specific growth rate, and feed conversion ratio were all higher in the HCBD group than in the control group, but not significantly so (P > 0.05). The hepatosomatic index (HSI) differed significantly in the two groups (P < 0.05), and the metabolomics results showed that a high carbohydrate intake induced significant increases in plasma α/β-glucose, succinate, and tyrosine, which could increase hepatic glycogen and triglyceride. Low levels of betaine were also found in the livers of the HCBD group. The histology and blood biochemistry results suggested abnormal liver, with excessive lipid accumulation and liver damage. A transcriptome analysis and quantitative reverse transcription–PCR (RT–qPCR) indicated that the expression of the factors INSR, IRS, PI3K, PDK, AKT, ACC, IL6, AP1, ChREBP-MLX, PEPCK, and FBP in the insulin signaling pathway was significantly upregulated and that of SOCS3, GSK3β, and AMPK significantly downregulated in the HCBD. This pattern is associated with the nonalcoholic fatty liver disease (NAFLD) pathway. This study extends our understanding of how high carbohydrate causes increased fat deposition in the liver, enhanced glycolysis (α/β-glucose) in the plasma, and reduced betaine in the liver. This leads to activation of hepatocyte insulin resistance and lipogenesis by regulating the expression of genes related to fatty liver disease.

This paper proposes a metaphysical framework for distinguishing between human and machine intelligence. It posits two identical deterministic worlds -- one comprising a human agent and the other a machine agent. These agents exhibit different information processing mechanisms despite their apparent sameness in a causal sense. Providing a conceptual modeling of their difference, this paper resolves what it calls “the vantage point problem” – namely, how to justify an omniscient perspective through which a determinist asserts determinism from within the supposedly deterministic universe.

Vaccine hesitancy has emerged as a significant barrier to achieving herd immunity and protecting populations from preventable diseases. Despite the proven effectiveness and safety of vaccines, many individuals remain hesitant or refuse to vaccinate themselves or their children. This review aims to identify the factors contributing to vaccine hesitancy, including misinformation, lack of trust in authorities, cultural beliefs, and access barriers. We also discuss the impact of vaccine hesitancy on public health, including outbreaks of vaccine-preventable diseases and erosion of trust in public health authorities. Furthermore, we present evidence-based communication strategies for addressing vaccine hesitancy, including building trust, providing accurate information, addressing myths and misconceptions, engaging with local influencers, and utilizing social media and digital platforms. By understanding the factors contributing to vaccine hesitancy and implementing effective communication strategies, healthcare providers, public health officials, and community leaders can work towards promoting widespread vaccine acceptance and protecting public health.

It is concerning that Cameroon's urban centers are experiencing an alarming rise in air pollution as a result of urbanization, population growth, industrial activity, and transportation emissions. We examined the causes, health impacts, research methodology, case studies, and government measures to address the urgent issue of air pollution in Cameroon's urban regions. We have emphasized how Cameroon's air pollution levels have significantly increased as a result of causes like population expansion, urbanization, industrial emissions, and automobile exhaust A thorough discussion of the negative health impacts of extended exposure to air pollution is included, with special attention to the sensitivity of the old and young. These effects include respiratory disorders, cardiovascular ailments, and early mortality. We emphasized the pressing need for all-encompassing strategies to address air pollution, such as increased public awareness campaigns, stronger emissions regulations, the development of renewable energy sources, and better waste management. The techniques employed in studies on air pollution, like as epidemiological research and air quality monitoring, are also explained to provide light on the unique health dangers that Cameroonian urban dwellers must contend with. We emphasized in our conclusion the significance of joint efforts by legislators, medical professionals, and the general people to reduce air pollution and protect public health in Cameroon in order to create a cleaner and healthier future. In order to protect public health in the future, it is imperative that Cameroon's air pollution be addressed.

Background: The commonly known assumption that combinations of several herbs in one formulation can have better efficacy due to additive or synergistic effects has not been systematically studied despite some evidence supporting the synergy concept. Study aim: The study aimed to reveal the molecular interactions in situ of host cells in response to the intervention of BHP and justify the benefits of implementing BHP in clinical practice. Results: This overview provides the results of recent clinical and network pharmacology studies of botanical herbal preparations (BHP) of Rhodiola with other plants, including Ashwagandha, Green Tea, Eleutherococcus, Schisandra, Eleutherococcus, Leuzea, Caffeine, Cordyceps, Gingko, Black Cohosh, saffron, and L-carnosine. Conclusions: The most important finding from network pharmacology studies of BHP was the evidence supporting the synergistic interaction of BHP ingredients, revealing unexpected new pharmacological activities unique and specific to the new BHP. Some studies show the superior efficacy of BHP compared with mono-drugs. At the same time, some a priori-designed combinations can fail, presumably due to antagonistic interactions and crosstalk between molecular targets within molecular networks involved in the cellular and overall response of organisms on the intervention. Network pharmacology studies help predict the results of studies to discover new indications and unpredicted adverse events.

Scale drop disease virus (SDDV), a double-stranded DNA virus in the family Iridoviridae, has been reported widely in southeast Asian countries as a causative agent of scale drop syndrome (SDS) in Asian seabass. SDS have resulted in high mortality and significant economic losses to the aquaculture industry. This study demonstrated the use of metagenomic methods to investigate bacterial and viral communities present in infected fish tissues and recovering a complete genome of the causative agent named SDDV TH7_2019. Characterization of the TH7_2019 genome revealed a genome size of 131 kb with 134 putative ORFs encoding viral proteins potentially associated with host apoptosis manipulation. A comparative genome analysis showed a high degree of amino acid identity across SDDV strains, with variations in number of repeat sequences and mutations within core genes. Phylogenetic analyses indicate a close relationship among SDDV genomes. This research enhances our understanding of the genetic diversity and evolutionary relationship of SDDV, contributing valuable insights for further development of effective control strategies of SDDV.

In recent times, the application areas of unmanned aerial vehicles (UAVs) are expanding, and autonomous functions are becoming increasingly prominent, eliminating the need for remote pilot control. Certain applications require the drone to use a docking station autonomously, even for wireless charging. This involves performing autonomous takeoff and landing, where high preci-sion is demanded. These maneuvers can be significantly influenced by environmental factors. The effectiveness of the precision landing function of the DJI Mavic 2 Pro UAV in strong winds is in-vestigated in this article based on experimental measurements conducted outdoors. New findings on the precision landing capabilities of the DJI Mavic 2 Pro UAV are presented in this paper, par-ticularly under windy conditions. The efficiency of precision landing is compared in cases when the precision landing function is enabled versus when it is disabled. It is investigated whether there is a statistically significant difference between the two landing modes in strong winds and it is examined whether the DJI Mavic 2 Pro can perform precision landing on a surface of a specific size in windy conditions. This helps to predict the suitability of the DJI Mavic 2 Pro for precise landing and wireless charging at a docking station in strong winds and high gusts.

The microbial contamination in food packaging have been a major concern that paved the way for the search for natural based new anti-microbial agents, such as modified α-mangostin. In the present work, twelve synthetic analogs were obtained via semi-synthetic modification of α-mangostin by Ritter reaction, reduction by palladium-carbon (Pd-C), alkylation, and acetylation. The evaluation of the anti-microbial potential of the synthetic analogs showed higher therapeutic value than the parent molecule. The anti-microbial studies proved that I E showed higher antibacterial activity whereas I I showed most significant antifungal activity. Due to their microbial properties, modified α-mangostin can be utilized as active anti-microbial agents in food packaging.

The primary objective of this study was to identify a rapid and noninvasive methodology for effectively differentiating various herbal species cultivated in Eastern Poland. Typically, a plant's chemical profile is obtained using chromatographic methods; however, spectroscopic methods can serve as a complementary or independent tool for determining similarities in the analyzed samples. The investigation centered on leaves of plant species from the Lamiaceae family, encompassing basil, lavender, oregano, sage, and thyme. UV-VIS and ATR-FTIR spectra of dried plant samples' powder were recorded and subsequently analyzed using chemometric tools. This paper assesses the relative performance of different discrimination methods, including both traditional methods based on machine learning and those dealing with specimens associated with a specific category. Among the methodologies tested, SIMCA showed the best performance, particularly effective for small training sets.

The importance of bio robotics has been increasing day by day. Researchers are trying to mimic nature in a more creative way so that, the system can easily adopt the complex nature and its environment. Hence, bio robotic gripper plays a role in physical connection between the environment and bio robotics system. While handling the physical world in biorobots gripper, the complexity occurs in feedback system where sensor plays a vital role. Therefore, human centered gripper sensor has a good impact on bio robotics field. But categorical classification and their selection process is not very systematic. This review paper follows PRISMA methodology to summarize the previous works on bio robotics gripper sensor and its selection process.. This paper discusses challenges in soft robotics systems, and the importance of sensing systems to facilitate critical control mechanisms along with their selection considerations. Furthermore, a classification of soft actuation based on gripper has been introduced. Moreover, some unique characteristics for soft robotics sensor are explored namely compliance, flexibility, multifunctionality, sensor nature, surface properties, and material requirements. In addition, a categorization of sensors for soft robotic gripper in terms of modalities has been established ranging from the tactile and force sensor to slippage sensor. Various tactile sensors ranging from piezoelectric sensing to optical sensing are explored as it has utmost importance in soft gripper to effectively address the increasing requirements for intelligence and automation. Finally, taking everything into consideration, a flow diagram has been suggested for selecting sensors specific to soft robotics applications.

In agriculture, the intricate relationship between innovation, productivity, and entrepreneurship is underexplored. Despite the widely recognised role of innovation in driving productivity, concrete indicators and comprehensive farm-level studies are lacking. This research aims to unravel this complexity by exploring the impact of innovation, specifically in agricultural entrepreneurship, on transformative changes in farm productivity. Using a two-stage analysis with the Malmquist Index (MI) of total factor productivity (TFP) on cereal farms from the Farm Business Survey (FBS) over 11 years, the study identifies innovators and, it assesses changes in productivity, technical efficiency, and economic efficiency. The second stage decomposes the MI to understand factors enabling innovation, including changes in technology scale. Objectives include a literature review to map innovation variables, integrating FBS data for validation and assessing productivity impacts from asset enhancements and changes in farming scale. Results reveal significant productivity variation and a moderate overall improvement. Future research directions emphasize expanded data collection on managerial behaviours and technology investments' role in efficiency frontier shifts. The study concludes by emphasising nuanced agricultural policies that leverage farmers' knowledge for innovation through enhanced management efficiency. It advocates for a departure from the 'bigger is better' mentality, proposing educational programs and support services to encourage informed decision-making. This forward-looking approach aims to inform future policies and enhance understanding of the intricate dynamics between agricultural innovation, productivity, and entrepreneurship.

Qatar and other Gulf States have a diverse range of marine vegetation that is adapted to the stressful environmental conditions of seawater. The industrial wastewater produced by oil and gas activities adds further detrimental conditions for marine aquatic photosynthetic organ-isms on the Qatari coastlines. Thus, these organisms experience severe stress from both seawater and industrial wastewater. This review discusses the biodiversity in seawater around Qatar, as well as remediation methods and metabolic pathways to reduce the negative impacts of heavy metals and petroleum hydrocarbons produced during these activities. These methods include phyto-stabilization phyto-accumulation, phyto-volatilization, and phyto-degradation. Phy-to-degradation in particular is discussed in detail, including metabolic pathways such as alkane and aromatic-compound degradation pathways. The role of microorganisms that are adjacent to or associated with these aquatic marine organisms is discussed, including rhizosphere biodeg-radation. In this type of biodegradation, exudates are released by plant roots and supply nutrients to microorganisms in the rhizosphere, which enhances their ability to degrade organic pollutants. Special attention is paid to mangrove forests and their roles in remediating shores polluted by industrial wastewater. Seagrasses (Halodule uninervis, Halophila ovalis, and Thalassia hemprichii) and seaweeds (Chlorophyta, Phaeophyta, and Rhodophyta) around the peninsula of Qatar are also discussed.

One of the efficient data mining tools is density-based clustering, including the density grid-based clustering. However, a common drawback always existing in clusters made by the density grid-based method is the existence of weakly connected grids deriving mainly from noise. Appearing such an unwanted connection with a high frequency reduces the accuracy of the obtained cluster data space (CDS) and its application efficiency. Here, we present an essential improvement to overcome this problem. First, we describe a concept of the weak-connected grid cell (WCG) and present a fuzzy-type approximation to depict the density-based distribution of data points at grid nodes. Then, we propose a strategy of searching WCG for density grid-based clustering (SWCG-DGB) to set up a CDS, filter noise, and tune the created CDS. A buffer is deployed during this phase to collect border points and filter noise, which improves the computational time significantly, especially for noisy datasets. Results from numerical surveys reflected the compared efficiency of this method in clustering validity, including the accuracy of the number of clusters.

Today, with the increase in population, technological developments, industrialization and urbanization, the problems related to waste management (WM) have become increasingly important to sustainably global clean environment. The gradual change in the quality of the elements that make up the environment, increasing environmental problems, and gaining global quality have caused societies to focus more on environmental problems. Waste management is a form of management that includes the prevention, non-prevention, reuse, recovery, and disposal of domestic, medical, hazardous, and non-hazardous wastes. In this study, it is aimed to prioritize critical success factors with the Analytical Hierarchy Process (AHP) in industrial waste management and to determine the most important critical success factor. The four main criteria and 23 sub-criteria were scored by the AHP method by five expert environmental engineers. Accordingly, after critical success factors were determined, survey questions were prepared to make employees rank these factors. While "national/local waste management strategies and policies" factor was the most important critical success factor according to experts, the most important critical success factor for employees was "enterprise waste management strategies and policies". In addition, differences in the priorities of CSFs were found in the opinions of employees in different sectors.

An emissions baseline for a city is the foundation to building an informed clean air action plan. This includes an understanding of the sources and their intensities to device cost-effective measures with the least health impacts. In an urban environment, emissions from road transport is one of the major contributors to the air pollution problem, and accounting for this sector requires a detailed profile of in-use vehicles, covering their age-mix, usage, and fuel economy. In this paper, we present a simplified framework to survey at select fuel stations to establish the necessary inputs and use them to build a localized vehicle emissions inventory. The methodology is illustrated with an application in the city of Patna, India. Here, the FuSS was employed to profile the in-use passenger vehicle characteristics by 19 trained students, over nine days and at ten fuel stations, to collect 9,775 survey points. The methodology outlined in this paper, along with the tools and training framework, is also replicable in settings other than the fuel stations.

This paper investigates a numerical code coupling technique to tackle multi-physics and multi-scale simulations using state-of-the-art software packages that typically address some specific modeling domain. The coupling considers the in-house FEM code, FEMuS, and the FVM code OpenFOAM, by exploiting the MED library from the SALOME platform. The present approach is tested on a buoyancy-driven fluid flow within a square cavity, where the buoyancy force constitutes the coupling term. In uncoupled scenarios, momentum and temperature equations are solved both in FEM and FVM codes without data exchange. In the coupled setting, only the OpenFOAM velocity and the FEMuS temperature fields are solved separately and shared at each time step (or vice versa). The MED library handles the coupling with the addition of suitable ad-hoc data structures that perform the field transfer between codes. Different Rayleigh numbers are investigated, comparing the outcomes of coupled and uncoupled cases with reference literature results. Additionally, a boundary data transfer application is presented to extend the capabilities of the coupling algorithm to coupled applications with separate domains. In this problem, the two domains share interfaces and boundary values on specific fields as fluxes are exchanged between the two numerical codes.

Amphiphilic block copolymers of N-vinyl pyrrolidone (NVP) and various vinyl esters (VEs), PNVP-b-PVEs, namely vinyl butyrate (VBu), vinyl decanoate (VDc) and vinyl stearate (VSt) were synthesized by RAFT polymerization techniques. The sequential addition of monomers methodology was employed starting from the polymerization of NVP followed by the polymerization of the VEs monomer. The reaction was conducted at 80oC in dioxane solutions using AIBN as initiator and O-ethyl S-(phthalimidylmethyl) xanthate as the CTA. The block copolymers were characterized by Size Exclusion Chromatography (SEC) and NMR spectroscopy. The thermal transitions of the copolymers were studied by Differential Scanning Calorimetry (DSC), whereas their thermal stability via Thermogravimetric Analysis (TGA) and Differential Thermogravimetry (DTG).

The application potential of cellulosic materials in natural composites and other fields needs to be explored to develop innovative, sustainable, lightweight, functional biomass materials that are also environmentally friendly. This study investigated Typha augostifolia (Typha sp.) as a potential new raw material for extracting cellulose nanocrystals (CNCs) for application in wastewater treatment composites. Alkaline treatments and bleaching were used to remove cellulose from the stem fibers. The CNCs were then isolated from the recovered cellulose using acid hydrolysis. The study showed a few distinct functional groups (O-H, -C-H, =C-H and C-O, and C-O-C) in the Fourier Transform Infrared (FTIR) spectra. Scanning electron microscope (SEM) revealed the smooth surface of CPC and CNCs that resulted from removing lignin and hemicellulose from powdered Typha augostifolia. Based on the crystalline index, the powdered Typha augostifolia, CPC, and CNCs were 42.86%, 66.94% and 77.41%. The loss of the amorphous section of the Typha sp. fiber resulted in a decrease in particle size. It may be inferred from the features of a Typha sp. CNC that CNCs may be employed as reinforcement in composites for wastewater treatment.

Background: Alzheimer's disease (AD) is a leading cause of dementia, significantly influenced by the Apolipoprotein E4 (APOE4) gene and gender. This study aims to use machine learning (ML) algorithms to predict brain age and assess AD risk by considering the effects of APOE4 genotype and gender. Methods: We collected brain volumetric MRI data and medical records from 1100 cognitively unimpaired individuals and 602 AD patients. We applied three ML regression models—XGBoost, Random Forest (RF), and Linear Regression (LR)—to predict brain age. Additionally, we introduced two novel metrics, Brain Age Difference (BAD) and Integrated Difference (ID), to evaluate model performance and analyze the influence of APOE4 genotype and gender on brain aging. Results: AD patients displayed significantly older brain ages compared to their chronological ages, with BADs ranging from 6.5 to 10 years. The RF model outperformed both XGBoost and LR in terms of accuracy, delivering higher ID values and more precise predictions. Comparing APOE4 carriers with non-carriers, the models showed enhanced ID values and consistent brain age predictions, improving overall performance. Gender-specific analyses indicated slight enhancements, with models performing equally well on both genders. It indicates that APOE4 may be a more robust predictor of brain age than gender. Conclusion: Robust ML models for brain age prediction can be pivotal in the early detection of AD risk via MRI brain structural imaging, especially for APOE4 carriers. Such early identification may facilitate timely preventive interventions for AD.

The COVID-19 pandemic has significantly impacted human health and daily life. Meteorological factors play a crucial role in virus transmission. Understanding these factors is critical for pandemic control, yet debates continue due to variations in research methods and data. This study uses a global dataset and focuses on administrative units smaller than 10,000 km². The relationship between daily COVID-19 incidence rates and meteorological factors—including temperature, relative humidity (RH), ultraviolet radiation (UVR), and diurnal temperature range (DTR)—was analyzed across 173 units in 62 countries. The results revealed significant nonlinear responses and lag effects between incidence rates and the meteorological factors. Key inflection points were observed at 0°C and 24°C for temperature, 63% for RH, 102 KJ/m² for UVR, and 15°C for DTR. Below 0°C, infection risk increased with rising temperatures; from 0°C to 24°C, risk decreased; and above 24°C, risk escalated rapidly. RH below 63% correlated inversely with infection risk, while above 63%, the correlation was positive. Infection risk decreased with UVR below 102 KJ/m² but increased beyond this threshold. These nonlinear responses are primarily driven by the differential effects of these factors on virus survival, transmission, and human immunity. Conditions around 24°C, 63% RH, 102 KJ/m² UVR, and DTR below 15°C appear optimal for human immunity, correlating with lower infection risk. High temperature and low UVR prompted immediate infection responses, while low temperatures, high UVR, and larger DTR showed delayed effects. These findings provide new, more reliable evidence for understanding the mechanisms driving COVID-19 pandemic dynamics and for preventing the future normalization of the epidemic.

In the decarbonization of the steel, cement, and chemical industry in Germany, green hydrogen is expected to play a crucial role. The utilization of green hydrogen in the production processes of said industries requires organizations to modify their business model, requiring sustainable business model innovation (SBMI). Numerous tools and frameworks that support organizations in the process of SBMI have been proposed in the literature in recent years. However, the applicability of these tools and frameworks for steel, cement, and chemical companies that intend to utilize green hydrogen to produce their goods remains unexplored. By conducting a systematic literature review on tools and frameworks for SBMI, a literature and practice review to identify and analyze existing green hydrogen projects of steel, cement, and chemical companies, and an evaluation of the identified tools and frameworks in an evaluation matrix, this paper aims to assess the suitability of SBMI tools and frameworks for steel, cement, and chemical companies that plan to use green hydrogen to produce their goods. Based on the evaluation, the Cambridge Business Model Innovation Process (CBMIP) was identified as the most suitable SBMI framework.

The Internet of Things (IoT) technology connects the real world and the network world by integrating sensors and internet technology, which has greatly changed people's lifestyles, showing its broad application prospects. However, traditional materials for the sensors and power components used in IoT limit its development to high-precision detection, long-term endurance, and multi-scenario applications. Metal halide perovskite, with the unique advantages such as excellent photoelectric properties, adjustable bandgap, flexibility, and mild process, exhibiting enormous potential to meet the requirements for IoT development. This paper provides a comprehensive review of metal halide perovskites' application in sensors and energy supply modules within IoT systems. Advances on perovskite-based sensors were discussed as to gas, humidity, photoelectric, and optical sensors. The application of indoor photovoltaics based on perovskite in IoT systems were also discussed. At last, the application prospects and challenges of perovskite-based devices in IoT are summarized.

This study introduces an integrated method for managing process risks in a Business Process Reengineering (BPR) project, using Robust Data Envelopment Analysis (RDEA) and machine learning (ML). The goal is to prioritize risks based on three standard factors of PFMEA: Severity, Occurrence, and Detection (S-O-D), and incorporating two additional factors (Breakdown Cost and Breakdown Duration) seen as undesirable outputs. The model also accounts for the effect of uncertainty on expert-estimated values by applying disturbance percentages in the linear PFMEA-RDEA model. A machine learning model is proposed to predict new values if partial or total modifications have been made to the processes. The approach was implemented in an au-tomotive sector company, and the results showed the impact of uncertainty on values by com-paring different approaches such as RPN, PFMEA-DEA, and PFMEA-RDEA. A new reduced risk categorization was achieved, who allowed for decision-makers to focus on necessary actions for reengineering.

The direct hydrogenation of greenhouse gas carbon dioxide (CO2) to higher alcohols (C2+OH), as an important research area in C1 chemistry, is one of the most essential approaches to convert CO2 into liquid fuels or other value-added chemicals. The high atom economy and direct pathway make this reaction attractive to convert CO2 to higher alcohols. However, due to the complicated reaction network and the difficulty of C-C coupling, the formation of higher alcohols is more difficult compared with methanol or other compounds containing one carbon. The key issue is development of novel catalysts with high conversion and space time yield. But this is still a huge challenge faced by researchers. In this review, the thermodynamics and reaction pathways of CO2 hydrogenation were firstly clarified. Subsequently, after reviewing single metal-based, bi-and multi-metallic catalysts, the recently progress of tandem catalytic system was emphasized. Finally, we also provided an overview about tandem catalysis for CO2 hydrogenation to higher alcohols.

Technological equipment in quarries that extract and deliver aggregates for different uses operates in a predetermined flow depending on the type of rocks exploited and the dimensional characteristics imposed on the final products. In this context, the interruptions in operation required to replace high-wear parts (such as the teeth of excavators and bucket loaders) must be limited as much as possible through technological solutions to increase their service life. The evolution of the wear of the teeth of the quarry equipment that come into direct contact with the rocks was concretely established in the production process, in parallel with the wear values obtained by simulating the wear phenomenon in laboratory conditions, in order to validate the data collected during the operation of the machines. Preventive-repetitive maintenance, within the activities of reconditioning the worn surfaces of the teeth, through the charging process by manual electric welding with covered electrodes, was applied directly to the machine, which led to the shortening of the interruptions in operation necessary to replace these spare parts.

The undoped and tungsten (W)-doped vanadium dioxide (VO₂) thin films were prepared by electron beam evaporation associated with ion-beam assisted deposition (IAD). The influence of different W-doped contents (3%-5%) on the optical, electrical, structural, and thermos-mechanical properties of VO₂ thin films was investigated experimentally. Spectral transmittance results showed that with the increase of W-doped contents, the transmittance in the visible light range (400-750 nm) decreases from 60.2% to 53.9%, and the transmittance in the infrared wavelength range (2.5 μm to 5.5 μm) drops from 55.8% to 15.4%. As the W-doped content increases, the residual stress in the VO₂ thin film decreases from -0.276 GPa to -0.238 GPa, but the surface roughness increases. For temperature-dependent spectroscopic measurements, heating the VO2 thin films from 30°C to 100°C showed the most significant change in transmittance for the 5% W-doped VO₂ thin film. When the heating temperature exceeds 55°C, the optical transmittance drops significantly, and the visible light transmittance drops by about 11%. Finally, X-ray Diffraction (XRD) and scanning electron microscope (SEM) were used to evaluate the microstructure characteristics of VO₂ thin films.

The innovativeness of nongovernmental organisations, the basic institutions of civil society, is conditioned, among other things, by the endogenous potential of agency of the entities operating within them. The article attempts to answer two research questions regarding the above-mentioned issues: (1) how individual components of binding and bridging social capital (in the area of trust, norms and connections) determine innovative activity in a state of morphostasis, i.e. structural and cultural continuity, selected Silesian NGOs. (2) What type of reflexivity and the related nature of agency of the members of the NGOs surveyed dominates when undertaking innovative activities? At the theoretical level, the study was based on the concept of three components of social capital by James S. Coleman and the assumptions of Margaret Archer's morphogenetic theory of structure and agency, in particular, the types of reflexivity as a factor conditioning social agency. Based on them and using qualitative analysis of data obtained during focus group interviews (FGI) and SWOT questionnaires of surveyed organisations, a diagnosis of intraorganisational barriers to innovation was made. The Atlas.ti computer programme was used. This method allows for the examination of structural elements, cultural features of a given organisation, and the capabilities of individual entities. The dominance of bonding social capital components over bridging social capital components was noted (mainly in the dimension of trust), as the basic bond connecting members of the NGOs studied. It was accompanied by a communicative type of reflexivity of the respondents, with the aim of maintaining the existing organisational and social status quo. These key socio-cultural factors determine the morphostatic nature of the organisations studied, i.e., their focus on maintaining the organisational status quo. Such contexts petrify the existing power structure, but also the level of social tensions and distances, and limit the innovation potential.

Industrial fires at facilities including waste management sites, warehouses, factories, chemical works and fuel storage depots are relatively frequent occurrences. Often, these fires occur adjacent to urban communities and result in ground-level airborne pollutant concentrations that are well above guideline values. Land, water, livestock and crops may also be contaminated by the emissions and by firefighting activities. Moreover, impacted communities tend to have a higher proportion of minority ethnic populations, individuals with underlying health vulnerabilities, as well as those of lower socio-economic status. Nevertheless, this is an aspect of air quality that is under-researched, and so this review aims to highlight the public health hazards associated with industrial fires and the need for an effective, coordinated, public health response. We also review the range of monitoring techniques that have been utilised in such fires and highlight the role of dispersion modelling in predicting plume trajectories and in estimating population exposure. We recommend establishing 1-h guideline values for particulate matter to facilitate timely public health interventions and we highlight the need to review regulatory and technical controls for sites prone to fires, particularly in the waste sector.

Based on the resource-based theory, the current study examines the relationship between competitive strategies and strategic alliance performance. Furthermore, big data predictive analytics is treated as a boundary condition between competitive strategies and strategic alliance performance. Big data of predictive analytics in operations and industrial management has been a focal point in the current era. There has been little attention has about big data predictive analytics influences on competitive strategies and strategic alliance performance, especially in developing countries like Pakistan. A survey instrument was used to record the responses from 331 employees of the telecom sectors companies working in Pakistan. Study findings show that big competitive strategies have a positive and significant relationship with strategic alliances performance. It was also found that big data predictive analytics plays the role of moderator between competitive strategies and strategic alliance performance. The study add a new perspective and contribution to the literature on big data predictive analytics, strategic alliance performance, and competitive strategies in Pakistan's telecom sector companies. Further, the study results explain that big data analytics is just like the companies' lifeblood in the current era. The efficient and effective use of big data analytics, companies can boost their standards in a competitive environment.

Generative artificial intelligence (GenAI) has been developing with many incredible achievements like ChatGPT and Bard. Deep generative model (DGM) is a branch of GenAI, which is preeminent in generating raster data such as image and sound due to strong points of deep neural network (DNN) in inference and recognition. The built-in inference mechanism of DNN, which simulates and aims to synaptic plasticity of human neuron network, fosters generation ability of DGM which produces surprised results with support of statistical flexibility. Two popular approaches in DGM are Variational Autoencoders (VAE) and Generative Adversarial Network (GAN). Both VAE and GAN have their own strong points although they share and imply underline theory of statistics as well as incredible complex via hidden layers of DNN when DNN becomes effective encoding/decoding functions without concrete specifications. In this research, VAE and GAN is unified into a consistent and consolidated model called Adversarial Variational Autoencoders (AVA) in which VAE and GAN complement each other, for instance, VAE is good at generator by encoding data via excellent ideology of Kullback-Leibler divergence and GAN is a significantly important method to assess reliability of data which is realistic or fake. In other words, AVA aims to improve accuracy of generative models, besides AVA extends function of simple generative models. In methodology this research focuses on combination of applied mathematical concepts and skillful techniques of computer programming in order to implement and solve complicated problems as simply as possible.

This paper reviews the requirements for the production, quality, and quality assurance of solid recovered fuels (SRF) that are increasingly used for the substitution of fossil fuels in the indus-trial utilities. The economical, technological and environmental aspects should be considered before using SRF as an alternative fuel. In general, the most important factors determining the commercial production of SRF referred to the calorific values and their available amounts adopted in the starting materials. Furthermore, the low-melting impurities and undesired constituents/elements, including chlorine, sulfur, potassium and sodium, may pose negative impacts on air pollutant emission and slagging & fouling in the process utilities. In this regard, the vent emitted from the industrial utilities must comply with the effluent standards of station-ary sources like particulate, sulfur oxides, nitrogen oxides, heavy metals (e.g., lead, cadmium, and mercury) and dioxins. For these reasons, this work will summarize the legal or regulatory requirements under development in Asian countries (i.e., Japan, South Korea, and Taiwan) and European Union (EU). Finally, the outlook of solid recovered fuel (SRF) in the waste manage-ment and industrial sectors will be addressed to echo the sustainable development goals (SDGs).

Aloe vera is well known for its biological properties as a bioflavonoid-anti-inflammatory, antibacterial agent. It has been used frequently in the food sector as food coating for its hygroscopic properties and as an ingredient in the lucrative industry. Studies have also included Aloe vera as an eco-friendly green solution based on these properties. The current research focuses on the use of Aloe vera gel in printing pastes as an alternative sustainable solution to synthetic thickeners, evaluating its wet performance and ease of fabric stitching, and has been inspired by studies that similarly used this substance measuring its effect on the fabric's coefficient of friction and antimicrobial action. In the current study, printing pastes with natural colourants and Aloe vera gel thickener derived from natural leaves from Crete increased the fabric's mechanical resistance to abrasion compared to the untreated pastes. The measured performance did not differ substantially from prints with traditional synthetic pastes, hence tolerating the substitution with the non-contaminant variant. The enhanced resistance to abrasion and wear prolongates the fabric's serviceable life and resulting garments, decreasing the need for high industry processing volumes and, as a result, reducing pollution. The resistance to wear was evaluated using the dominant method in textile testing of the Martindale apparatus, which measured the cycles to failure, weight loss, and general appearance deterioration using the official photographic standards.

Despite ongoing efforts, the relationship between groin strength and injury remains unclear. The challenge of accurately predicting injuries presents an opportunity for researchers to develop pre-vention strategies to reduce the occurrence of such injuries. Consequently, this issue requires further investigation to obtain insights into effective mitigation strategies. In 120 male soccer players the maximum isometric strength of the hip muscle groups was measured, and the strength ratios were calculated. Previous injury and anthropometric data were registered. Injury data were collected following the FIFA/UEFA consensus. The K- Nearest Neighbour (k-NN), was used to predict the incidence of injury, while the significant predictive variables of the k-NN algorithm were fitted into a multivariate logistic regression model (LR) to analyze the likelihood of players sustaining a groin injury. The LR model determined two variables as significant predictors of groin injury. Players were less likely to sustain a groin injury by 76% for each decrease of the Adductors/Abductors isometric strength ratio in the non-dominant limb (OR = 0.238, CI 95%= [(0.098-0.572]). Players with a history of previous injury had a 67% greater risk of sustaining an injury (OR = 0.333, CI 95%= [(0.1068-1.038]). Isometric hip adductor and abductor strength im-balances of the non-dominant lower limb and a history of previous injury were risk factors for groin injury in soccer players.