Urban planning and transportation policies are vital to creating sustainable and liveable cities. Transit-orientated development (TOD) has emerged as a prominent approach, emphasising the establishment of neighbourhoods with convenient access to public transportation and promoting car-free lifestyles. TOD initiatives aim to improve public transit efficiency, reduce dependence on private vehicles, and encourage walkability and connectivity within communities. By prioritising TOD, cities can effectively address transportation challenges, alleviate congestion, mitigate carbon emissions, and improve residents' overall quality of life. This research paper investigates the connection between proximity to transit stations and local living habits. Specifically, it examines the human mobility of residents living within a 15-minute walk distance of transit stations in Auckland, New Zealand, a car-dependent city striving to transition into a sustainable TOD model. The objective is to determine whether people living near transit stations are more inclined to participate in local activities and exhibit a higher proportion of trips within a radius of 15 minutes. The results illustrate that approximately 54% of the residents show dominant local mobility patterns. However, only about 16 stations out of 34 show their local residents have prominent collective 'local' travel patterns. By understanding the connection between proximity to transit stations and local mobility patterns, urban planners and designers can make informed decisions to improve the built environment and optimise the land use mix. This research offers insights to support the creation of vibrant and people-centric urban environments, facilitating the development of sustainable and liveable cities.

Perfluorohexane sulfonate (PFHxS) is a widely detected replacement for legacy long-chain perfluoroalkyl substances (PFAS) in the environment and human blood samples. Its potential toxicity led to its recent classification as a global regulated persistent organic pollutant. Although animal studies have shown a positive association between PFHxS levels and hepatic steatosis and hepatocellular hypertrophy, the link with liver toxicity, including end-stage liver cancer, remains inconclusive. In this study, we examined the effects of PFHxS on the proliferation of human hepatocellular carcinoma (HCC) cells, Hep3B and SK-Hep1. Cells were exposed to different PFHxS concentrations for 24–48 hr to assess viability and 12–14 days to measure colony formation. Viability of both cell lines increased at PFHxS concentrations <200 μM, decreased at >400 μM, and were highest at 50 μM. Colony formation increased at <300 μM and decreased at 500 μM PFHxS. Consistent with the effect on HCC proliferation, PFHxS increased expression of proliferating cell nuclear antigen (PCNA) and cell-cycle molecules (CDK2, CDK4, cyclin E, and cyclin D1). In summary, PFHxS exhibited a biphasic effect on HCC cell proliferation, promoting survival and proliferation at lower concentrations and being cytotoxic at higher concentrations. This suggests that PFHxS potentially exacerbates HCC progression.

With limited state budget, developed nation public higher education have increased their fees making education expensive for most developing nation students. Some developing nations have set up regional low-cost education hubs to attract developed nation universities to offer their reputable degree programs. However, the intense competition for student enrolment in both has led to the marketisation of education. Students as paying customers need to experience satisfying stress-free teaching and learning to sustain enrolment. With employers increasingly unhappy with the quality of human capital, has the marketisation of higher education led to nominal human capital development? Can substantive human capital be developed in the new normal of marketisation of higher education? An adaptation of randomised control trials was used to measure learning outcomes desired by future employers for two teaching and learning approaches namely students as customers (n=497) and employers as customers (n=355). Findings show both approaches have good learning outcomes with the latter generally more superior. However, the former leads to nominal learning outcomes. This research extends the literature on achieving substantive learning outcomes conducive to employability. Implications for student satisfaction, lecturer professionalism, employability and quality assurance are discussed.

Human disturbance, such as trampling, is an integral component of global change, yet we lack a comprehensive understanding of its effects on alpine ecosystems. Many alpine systems are seeing a rapid increase in recreation, and in understudied regions, such as the Coast Mountains of British Columbia, disturbance impacts on alpine plants remain unclear. We surveyed disturbed (trail-side) and undisturbed (off-trail) transects along elevational gradients of popular hiking trails in the T’aḵ’t’aḵ’múy̓in tl’a In̓inyáx̱a7n region (Garibaldi Provincial Park), Canada, focusing on dominant shrubs (Phyllodoce empetriformis, Cassiope mertensiana, Vaccinium ovalifolium) and graminoids (Carex spp). We used a hierarchical Bayesian framework to test for disturbance by elevation effects on total plant percent cover, maximum plant height and diameter (growth proxies), and buds, flowers, and fruits (reproduction proxies). We found that trampling reduces plant cover and impacts all species, but that effects vary by species and trait, and disturbance effects only vary with elevation for one species’ trait. Growth traits are more sensitive to trampling than reproductive traits, which may lead to differential impacts on population persistence and species level fitness outcomes. Our study highlights that disturbance responses are species-specific, and this knowledge can help land managers minimize disturbance impacts on sensitive vegetation types.

Dogs play an important role in the transmission of Leishmania infantum but epidemiologic and clinical studies of canine tegumentary leishmaniasis (CTL) are scarce. In an endemic area of human American Tegumentary Leishmaniasis (ATL) caused by Leishmania braziliensis, we determine the prevalence and incidence of both CTL and subclinical (SC) L. braziliensis infection in dogs and evaluated if the presence of dogs with the CTL or the SC L. braziliensis infection is associated with the occurrence of human ATL. SC infection in healthy animals and CTL in animals with ulcers was determined by PCR on biopsied healthy skin or on the ulcer or detecting antibodies against soluble leishmania antigen. We compared the occurrence of human ATL in homes with dogs with CTL or SC infection with control homes without dogs or with dogs without CTL or SC infection. The prevalence of SC infection was 35% and of CTL 31%. The incidence of SC infection in dogs was 4.6% and of CTL was 9.3%. The frequency of ATL in humans was 50% in homes with infected dogs and 13% in homes without L. braziliensis infection in dogs. CTL and SC infection is highly prevalent, and dogs may participate in the transmission chain of L. braziliensis.

Periodontal diseases significantly impact about half of the global population, and their treatment often encompasses relieving symptoms as well as regenerating the destroyed tissues. Revolu-tionary research in the management of periodontal disease includes biomaterials, a boon to re-generative dentistry owing to their excellent biological properties, non-toxic, an-ti-inflammatory, biocompatible, biodegradable, and adhesion. This study aimed to fabricate an injectable fucoidan containing chitosan hydrogel and prove its effectiveness in periodontal bone regeneration. The injectable hydrogel was prepared using the sol-gel method and loaded into 2ml syringes. 40 periodontitis patients with bony defects were recruited and randomized into two groups, to re-ceive fucoidan-chitosan hydrogel and concentrated growth factor, respectively. Customized acrylic stents were used to guide the hydrogel placement into the defect site. Post-surgical changes in clinical parameters were assessed at 3, 6 and 9 months to appreciate the soft & hard tissue changes using repeated measures analysis of variance and Bonferroni’s posthoc test. Significance was kept at 5%. The fucoidan-chitosan hydrogel exhibited significantly lower probing depth values and a higher mean reduction in clinical attachment level as compared to the CGF group at the end of 3 and 6 months (p<0.05). The mean defect fills in the fucoidan-chitosan group was 1.20 at the end of 9 months (p<0.001). The presence of fucoidan in the hydrogel significantly contributed to bone re-generation in humans, thus strengthening its potential in tissue engi-neering. Fucoidan- Chitosan will be a promising biomaterial for bone tissue regeneration.

This paper presents ROSGPT, an innovative concept that harnesses the capabilities of large language models (LLMs) to significantly advance human-robot interaction. We develop ROSGPT as a ROS2 package that seamlessly integrates ChatGPT with ROS2-based robotic systems. The core idea is to leverage prompt engineering with LLMs, specifically ChatGPT, utilizing its unique properties such as ability eliciting, chain-of-thought, and instruction tuning. The concept employs ontology development to convert unstructured natural language commands into structured robotic instructions specific to the application context through prompt engineering. We capitalize on LLMs' zero-shots and few-shots learning capabilities by eliciting \textit{structured} robotic commands from \textit{unstructured} human language inputs. To demonstrate the feasibility of this concept, we implemented a proof-of-concept that integrates ChatGPT with ROS2, showcasing the transformation of human language instructions into spatial navigation commands for a ROS2-enabled robot. This versatile concept can be easily adapted to various other robotic missions. ROSGPT serves as a new stride towards Artificial General Intelligence (AGI) and paves the way for the robotics and natural language processing communities to collaborate in creating novel, intuitive human-robot interactions. The open-source implementation of ROSGPT on ROS 2 is available on GitHub.

The ultimate objective of this research work is to design a sensitive and selective electrochemical sensor for efficient detection of ascorbic acid (AA), a vital antioxidant found in blood serum that may serve as a biomarker for oxidative stress. To achieve this, we utilized a novel Yb2O3.CuO@rGO nanocomposite (NC) as the active material to modify the glassy carbon working electrode (GCE). The structural properties and morphological characteristics of the Yb2O3.CuO@rGO NC were investigated using various techniques to ensure their suitability for the sensor. The resulting sensor electrode was able to detect a broad range of AA concentrations (0.5 - 1571 µM) in neutral phosphate buffer solution with a high sensitivity of 0.4341 µAµM-1cm-2 and a reasonable detection limit of 0.062 µM. The sensor's great sensitivity and selectivity allowed it to accurately determine the levels of AA in human blood serum and commercial vitamin C tablets. It demonstrated high levels of reproducibility, repeatability, and stability, making it a reliable and robust sensor for the measurement of AA at low overpotential. Overall, the Yb2O3.CuO@rGO/GCE sensor showed great potential in detecting AA from real samples.

Purpose, This research aimed to examine the effect of green logistics (GL) and green human resource management (GHRM) on the performance of environmentally friendly manufacturing industries oriented towards sustainable development of organizations (SDO) through the role of sustainable production (SP) as a mediating variable. Methodology, A quantitative approach was employed through a standardized questionnaire to obtain data from 110 manufacturing industries in Indonesia that implemented environmentally friendly practices. Advanced statistical techniques, such as Structural Equation Modeling (SEM) and data analysis using Smart PLS (Partial Least Square) version 4 were utilized to analyze the collected data. Findings, The results showed that the model supported the statistical significance of all seven hypotheses and confirmed the direct and mediating effects of GL, GHRM, and SP on SDO. Practical implications, This research added critical insights into the theory and practice of GL and GHRM to realize SDO through the role of SP as a mediator in environmentally friendly manufacturing industries. Originality, This research contributd to the existing literature by adding to the effect of SP mediation on the relationship of GL and GHRM on SDO. There was no previous research that discussed the important role of SP mediation in influencing the relationship between GL and GHRM on SDO.

A pandemic happens when a novel influenza A virus is able to infect and transmit efficiently to a new, distinct host species. Although the exact timing of pandemics is uncertain, it is known that both viral and host factors play a role in their emergence. Species-specific interactions between the virus and the host cell determine the virus tropism. These include binding and entering cells, replicating the viral RNA genome within the host cell nucleus, assembling, maturing, and releasing the virus to neighbouring cells, tissues, or organs before transmitting it between individuals. Influenza has a vast and antigenically varied reservoir. In wild aquatic birds, the infection is typically asymptomatic. Avian influenza virus (AIV) can cross into new species, and occasionally, it can acquire the ability to transmit from human to human. A pandemic might occur if a new influenza virus acquires enough adaptive mutations to maintain transmission between people. This review highlights the key determinants AIV must achieve to initiate a human pandemic and describes how AIV mutates to establish tropism and stable human adaptation. Understanding the tropism of AIV may be crucial in preventing virus transmission in humans and may help design vaccines, antivirals and therapeutic agents against the virus.

As common industrial by-products, airborne engineered nanomaterials are considered important environmental toxicants to monitor due to their potential health risks to humans and animals. The main uptake routes of airborne nanoparticles are nasal and/or oral inhalation, which are known to enable the transfer of nanomaterials into the blood stream resulting in rapid distribution in the body. Consequently, mucosal barriers present in nose, buccal and lung have been identified and intensively studied as the key tissue barrier to nanoparticle translocation. Despite decades of research, surprisingly little is known about the differences among various mucosa tissue types to tolerate nanoparticle exposures. One limitation in comparing nanotoxicological data sets can be linked to a lack of harmonization and standardization of cell-based assays, where a) different cultivation conditions such as air-liquid interface or submerged cultures, b) varying barrier maturity and c) diverse media substitutes have been used. The current comparative nanotoxicological study therefore aims at analyzing the toxic effects of nanomaterials on four human mucosa barrier models including nasal (RPMI2650), buccal (TR146), alveolar (A549), and bronchial (Calu-3) mucosal cell lines to better understand the modulating effects of tissue maturity, cultivation conditions and tissue type using standard Transwell cultivations at liquid-liquid and air-liquid interfaces. Overall, cell size, confluency, tight junction localization, and cell viability as well as barrier formation using 50% and 100% confluency was monitored using trans-epithelial-electrical resistance (TEER) measurements and Presto Blue assays of immature (e.g. 5 days) and mature (e.g. 22 days) cultures in the presence and absence of corticosteroids such as hydrocortisone. Results of our study show that cellular responses to increasing nanoparticle exposures are highly cell type specific, where bronchial mucosal cell barriers models cultivated under ALI conditions showed less tolerance to acute ZnO nanoparticle exposures. Additionally, stronger toxicities are found using early mucosa barriers compared to later barrier models being maturated under air-liquid cultivation conditions.

Cultural practices and development level can influence a population’s household structures and mixing patterns. Within some populations households can be organized across multiple dwellings. This likely affects the spread of infectious disease spreads through these communities, however, current demographic data collection tools do not record these data. Methods: Between June–October 2018, the Contact And Mobility Patterns in remote Aboriginal Australian communities (CAMP-remote) pilot study recruited Aboriginal mothers with infants in a remote northern Australian community to complete a monthly iPad-based contact survey. Results: Thirteen mother-infant pairs (participants) completed 69 study visits between recruitment and the end of May 2019. Participants reported they and their other children slept in 28 dwellings during the study. The median dwelling occupancy, defined as people sleeping in the same dwelling on the previous night, was nine (range: 3.5–25). Participants who completed at least three responses (n=8) slept in a median of three dwellings (range: 2–9). Each month a median of 28% (range: 0%–63%) of the participants travelled out of the community. Including these data in disease transmission models amplified estimates of infectious disease spread in the study community, compared to models parameterized using census data. Conclusions: The lack of data on mixing patterns in populations where households can be organized across dwellings may negatively impact the accuracy of infectious disease models for these communities and the efficacy of public health actions they inform.

Background: Studies have linked bats to outbreaks in human populations such as SARS-CoV-1 and MERS-CoV and the ongoing SARS-CoV-2 pandemic. Method: We carried out a longitudinal survey from August 2020 to July 2021 at two sites in Zimbabwe with bat-human interactions: Magweto cave and Chirundu farm. A total 1732 and 1866 individual bat faecal samples were collected respectively. Coronaviruses and bat species were amplified using PCR systems respectively. Results: Analysis of the coronavirus sequences revealed a high genetic diversity and we identified different sub-viral groups in the Alphacoronavirus and Betacoronavirus genus. The established sub-viral groups fell within the described Alphacoronavirus sub-genera: Decacovirus, Duvinacovirus, Rhinacovirus, Setracovirus and Minunacovirus and for Betacoronavirus sub-genera: Sarbecoviruses, Merbecovirus and Hibecovirus. Our results showed an overall proportion for CoV positive PCR tests of 23.7% at Chirundu site, 16.5% and 38.9% at Magweto site for small insectivorous bats and Macronycteris gigas respectively. Conclusion: The higher risk of bat coronaviruses exposure for humans ranged from December to March in relation to higher viral shedding peaks of coronaviruses in the parturition, lactation and weaning months of the bat populations at both sites. We also highlight the need to further document viral infectious risk in human/domestic animal populations surrounding bat habitats in Zimbabwe.

Anticipating future successional forest trends in the face of ongoing global change is an essential conservation target. Mountain forests are especially sensitive to environmental shifts, and their past responses to climatic and anthropogenic (external) drivers may provide a basis for improving predictions of future developments. This paper uses independent high-resolution palynological and paleoclimatic reconstructions to statistically analyze the long-term effects of external drivers on regional forest succession in the central Iberian Pyrenees during the last 500 years. The dominant taxa of these forests (Quercus, Betula, Pinus) showed significant relationships with summer temperature, summer drought and autumn precipitation. Immediate and delayed (by two or more decades) responses of these trees to climatic drivers were identified. Regional succession showed a closed path, starting at the end points around the attraction domain of pine-dominated forests. This trajectory was determined by a trend toward anthropogenic forest clearing (16th to 18th centuries) and a reverse trend of natural forest recovery (18th to 20th centuries). Forest clearing was due to burning, facilitated by drought, and was followed by the expansion of cropping and grazing lands. Forest recovery was fostered by reduced human pressure and rising temperatures. The statistical approach used in this work has unraveled ecological relationships that remained unnoticed in previous works and would be important for predicting future successional trends under changing climates. The reported response lags of individual taxa to climatic drivers may complicate the establishment of reliable ecological relationships and should be addressed in future studies.

Modularity in the construction of industrial robots is becoming increasingly popular, as the modules can be assembled in different ways so as to obtain various architectures of industrial robots determined by the requirements of specific applications. Such a robot with modular structure is considered in this paper. The tracked mobile robot, with translation – rotation – translation – translation – rotation (TRTTR) modular serial structure, is the subject of national invention patent number RO132301 B1/2021, granted by the State Office for Inventions and Trademarks of Bucharest, to “Nicolae Bălcescu” Land Forces Academy of Sibiu, Romania [1]. The tracked mobile robot has been designed to perform the task of humanitarian demining operations and the mechanical structure, respectively the kinematic analysis were described in detail in papers [1,2]. A first general objective of this paper is to highlight a dynamic-organological method to achieve an architectural structure of mobile robot on tracks, able to replace the human element in areas with high risk for health and life, for detection and demining anti-personnel and anti-armor minefields in countries where military conflicts have taken place. For this scope it was performed the dynamic modeling using the Lagrange’s formalism and to achieve the constructive optimization of the TRTTR mechanical structure, in order to obtain a minimum energy consumption through an optimal arrangement of the modules in its structure. A second objective is to improve the action flexibility of the technological product in humanitarian detection and demining operations, as well as for educational purposes, by training highly educated and specialized human resources in the field of advanced military technologies. The differential equations of motion of the robot has obtained and respectively the mechanical design equations, which lead to the optimal choice of the drive motors of the modules in the robot structure. Also, it is presented the mathematical model for obtaining the driving motor of base translation modulus (MTB SIL) of the modular serial tracked robot and the constructive solution of the MTB SIL module.

One of the major problems caused by repeated subcutaneous insulin injections in diabetic patients is insulin amyloidosis. Understanding the molecular mechanism of amyloid fibril formation of insulin and finding effective compounds to its inhibit or eliminate is very important and extensive research has been done on it. In this study, the anti-amyloidogenic and destabilizing effects of the pyrogallol, as a phenolic compound, on human insulin protein were investigated by CR absorbance, ThT and ANS fluorescence, FTIR spectroscopy and atomic force microscopy. According to the obtained results, the formation of amyloid fibrils at pH 2.0 and 50 °C was confirmed by CR, ThT, ANS, FTIR assays. Microscopic images also showed the twisted and long structures of amyloid fibrils. Simultaneous incubation of the protein with pyrogallol at different concentrations reduced the intensities of CR, ThT and ANS in a dose-dependent manner and no trace of fibrillar structures was observed in the microscopic images. FTIR spectroscopy also showed that the position of amide I band in the spectrum of samples containing pyrogallol was shifted. Based on the findings in this study, it can be concluded that pyrogallol can be effective in preventing and suppressing human insulin amyloid fibrils.

Malnutrition, unhealthy diets, and lifestyle changes have become major risk factors for non-communicable diseases while ad-versely impacting economic growth and sustainable development. Anthocyanins, a group of flavonoids that are rich in fruits and vegetables, contribute positively to human health. This review focuses on genetic variation harnessed through crossbreeding and biotechnology-led approaches for developing anthocyanins-rich fruit and vegetable crops. Significant progress has been made in identifying genes involved in anthocyanin biosynthesis in various crops. Thus, the use of genetics has led to the development and release of anthocyanin-rich crop cultivars in Europe and USA. Such a trend is emerging in the developing world. The purple pota-to “Kufri Neelkanth” has been released for cultivation in northern India, and a few colored grain wheat lines, developed through crossbreeding, are being tested for their productivity and adaptation. Although tomato is deficient in anthocyanins, some of its wild relatives are known to accumulate anthocyanins in their sub-epidermal fruit tissue. In Europe, anthocyanin-rich tomato cul-tivar ‘Sun Black’ developed via the introgression of Aft and atv genes has been released. The development of anthocyanin-rich food crops without any significant yield penalty has been due to the use of genetic engineering involving specific transcription factors or gene editing. The anthocyanin-rich food ingredients have the potential of being more nutritious than those devoid of anthocyanins. The inclusion of anthocyanins as a target characteristic in breeding programs can ensure the development of culti-vars to meet the nutritional needs for human consumption, particularly in the developing world.

The efficacy of the product development process is measured by the ability to launch a project with product and production process specifications that could guarantee that the manufacturing can produce it with the least impact. If a problem is detected late, they bring consequences beyond the high cost of the solution, if related to physical ergonomics, which will influence the well-being of operators, productivity, and quality. Virtual Reality (VR) and Digital Human Modeling (DHM) are ones of the enabling technologies of Industry 4.0 and has already been applied on a large scale in industries such as automotive, construction, and aeronautics. However, even though the huge applications, these technologies are not yet applied by these industries for the analysis of physical ergonomics during product development phases. This study aims to characterize the state of the art and technology about the application of Virtual Reality and Digital Human Modeling for the physical ergonomics analysis in the during product development phases in the industry through a systematic review of the literature and patents. In patent documents recovery, we used Derwent Innovation database. The research is based on searching the selected terms in the title, summary, and claims of the documents through a search strategy containing IPC code and keywords. In articles recovery, we searched ScienceDirect, Springer, and IEEExplore databases for scientific publications. The search resulted in 311 patents documents and 16 articles in the scientific database. This study analyzed the patents to map out the technological progress in this area, where we found in the charts and data an increasing number of publications per year and a spread application with a considerable number of new technologies presented in these recent patents. The literature review indicated that Virtual Reality technology complements the Digital Human Modeling during physical ergonomics analysis for manufacturing process already designed. The majority of research on the use of VR and DHM technologies for physical ergonomics analysis focus on the automotive industry and the ergonomic assessment of workstations and current processes. Further research is needed to investigate how Virtual Reality and Digital Human Modeling might assist in the understanding of physical ergonomics in certain tasks throughout the product development process, such as the simulation of worker posture or effort when assembling parts.

Exisitng studies argue life chances are, in part, vertically reproduced. Such a statement is applicable to the Chinese contexts as, but not limited to, parental hukou status, to some extent, determines the life chances their children receive. In this essay, the author would like to introduce human capital theory (HCT) and educational signalling theory (EST), and assess how the applications of each of these two models can enrich the understanding of vertical reproduction of individuals’ social mobility opportunities. The author would also present the limitations of each of these two models when addressing relevant Chinese contexts.

A foundational model has been developed based on trends built from empirical data of space exploration and computing power through the first six plus decades of the Space Age which projects earliest possible launch dates for human-crewed missions from cis-lunar space to selected Solar System and interstellar destinations. The model uses computational power, expressed as transistors per microprocessor, as a key broadly limiting factor for deep space missions’ reach and complexity. The goal of this analysis is to provide a projected timeframe for humanity to become a multi-world species through off-world colonization, and in so doing all but guarantees the long-term survival of the human race from natural and human-caused calamities that could befall life on Earth. Be-ginning with the development and deployment of the first nuclear weapons near the end of World War II, humanity entered a ‘Window of Peril’ which will not be safely closed until robust off-world colonies become a reality. Our findings suggest the first human-crewed missions to land on Mars, selected Asteroid Belt objects, and selected moons of Jupiter and Saturn can occur before the end of the 21^st century. Launches of human-crewed interstellar missions to exoplanet destinations within roughly 40 lightyears of the Solar System are seen as possible during the 23^rd century and launch of intragalactic missions by the end of the 24^th century. An aggressive and sustained space exploration program, which includes colonization, is thus seen as critical to the long-term survival of the human race.

(1) Background: Mouse-mammary tumor virus (MMTV) might play a role in the etiology of some breast cancers in humans. The purpose of our study was to identify MMTV DNA sequences in breast tissue samples from breast cancer patients operated in our regional center from Romania. (2) Methods: We have selected 75 patients with non-metastatic breast cancer treated with curative intent and searched with PCR the MMTV-like DNA sequence in the breast cancer tissue and normal breast tissue obtained from the same patients. (3) Results: None of the examined samples was positive for MMTV-like target sequences on PCR. (4) Conclusions: We could not prove that MMTV plays a role in the etiology of breast cancer in our patient group. This finding is similar to findings of other geographically related research groups and might be due to the fact that only the Mus musculus domesticus mouse species was proven to carry infectious MMTV, but not the Mus musculus musculus species, which is specific to South-Eastern Europe and some parts of Asia.

This paper describes the use of a new obtrusive light module of the Illumina v2 model to estimate the light that may enter bedroom windows. We used as input to the model, 1- the sources’ flux and spectrum derived from the color images taken by astronauts from the international space station, 2- an association between source spectrum and angular emission, and 3- a per zone inventory of obstacles properties and lamp height. The model calculate the spectral irradiance incident to buildings’ windows taking into account for the orientation of the street. By using the color information from an ISS image, we can classify pixels as a function of their spectra. With the same image, it is also possible to determine the upward photopic radiance for each pixel. Both serve as inputs to the model to calculate the spectral irradiance on any window. By having the spectral irradiance, it is possible to determine the Melatonin Suppression Index and the photopic irradiance on the window. Such information can later be used to perform epidemiological studies. The new methodology is applied to the case of Montréal in Canada for a set of houses’ locations. The computations are made for 2013 (pre-LED era).

Competition over environmental and natural resources characteristically lies at the heart of armed conflicts in Africa. It is also common knowledge that some companies dealing in products such as laptops, smart phones and jewellery; import minerals from conflict-affected areas, thereby indirectly fuelling conflicts in these areas or undermining human rights. For a continent endowed with natural resources including minerals, Africa has suffered the brunt of this predicament. This state of affairs has lent impetus to the adoption of several regulations geared towards curbing irresponsible business practices by companies relying on such minerals, the goal being, amongst others, to guarantee the protection of human rights. In May 2017, the European Union adopted Regulations intended to stop the importation of conflict minerals in Europe, debatably making giant strides in the direction of protection of human rights. These Regulations are to come into force in 2021. However, can these regulations advance the much-desired goal of protection of human rights in Africa on issues pertaining to conflict minerals? By analyzing the 2017 EU Regulations in light of previous regulations of a similar nature, the paper concludes that the said regulations constitute a weak normative framework and could in fact have unintended consequences on the fundamental rights of civilians in natural resource-rich conflict areas of Africa.

Based on the Organizational Support Theory, this study examines the relationship between human resource management practices and service performance of sharing workers by demonstrating the mediation role of work engagement. We tested this theoretical model using an in-person interview questionnaire survey of 318 downwind drivers. Results showed that: (1) the main effect of human resource management practices of sharing workers on service performance was significant; (2) work engagement played a prominent mediation role between human resource management practices and service performance of sharing workers; (3) the mediation role of employee vigor between the platform incentives and the performance of employee services was significant; (4) employee dedication had an obvious and indirectly positive mediating effect between sharing workers' dimensions of human resource management practice and their service performance; (5) employee absorption on the mediation role between the various dimensions of the sharing human resources management practices (platform support, platform incentives and platform constraints) and employee service performance was significant. This study has important value for the study on human resource management practices in the context of sharing economy, and provides practical enlightenment for employee management of the sharing economy platform.

Human activities for exploitation and utilization of coastal zones have transformed coastline morphology and severely changed regional flow fields, underwater topography, and sediment distribution in the sea. In this study, single-beam bathymetry coupled with sediment sampling and analysis was carried out to ascertain submarine topography, geomorphology and sediment distribution patterns and explore sediment provenance in Qinzhou Bay, China. The results show the following. 1) The underwater topography in Qinzhou Bay is complex and variable, with water depths in the range of 0–20 m. It can be divided into four underwater topographic zones: the central (outer Qinzhou Bay), eastern (Sanniang Bay), western (east of Fangcheng Port), and southern (outside of the bay) parts. 2) Based on geomorphological features, the study area comprises four major submarine geomorphological units (i.e., tide-dominated delta, tidal sand ridge group, tidal scour troughs, and underwater slope) and two intertidal geomorphological units (i.e., tidal flat and abrasion platforms). 3) Sandy sediments are widely present in Qinzhou Bay, accounting for 70% of the total sediments. From the mouth of the Maowei Sea to the offshore, the sediments gradually become coarser, shifting from sandy mud to muddy sand, and then to fine sand and medium–coarse sand. The detrital minerals contained in the sediments mainly consist of quartz, feldspar, debris, ilmenite, leucosphenite, and tourmaline, whereas the clay minerals are dominated by kaolinite, followed by illite and smectite. The sediment provenance is mainly terrigenous input from near-source rivers. With sea reclamation and dam construction, outer Qinzhou Bay has experienced enormous morphological variation of its coastline. Together with the channel effect where the velocity of ebb tide is greater than that of flood tide, the underwater topography is characterized by increased scale and height difference of troughs and ridges as well as enhanced offshore deposition.

Human activities for exploitation and utilization of coastal zones have transformed coastline morphology and severely changed regional flow fields, underwater topography, and sediment distribution in the sea. In this study, single-beam bathymetry coupled with sediment sampling and analysis was carried out to ascertain submarine topography, geomorphology and sediment distribution patterns and explore sediment provenance in Qinzhou Bay, China. The results show the following. 1) The underwater topography in Qinzhou Bay is complex and variable, with water depths in the range of 0–20 m. It can be divided into four underwater topographic zones: the central (outer Qinzhou Bay), eastern (Sanniang Bay), western (east of Fangcheng Port), and southern (outside of the bay) parts. 2) Based on geomorphological features, the study area comprises four major submarine geomorphological units (i.e., tide-dominated delta, tidal sand ridge group, tidal scour troughs, and underwater slope) and two intertidal geomorphological units (i.e., tidal flat and abrasion platforms). 3) Sandy sediments are widely present in Qinzhou Bay, accounting for 70% of the total sediments. From the mouth of the Maowei Sea to the offshore, the sediments gradually become coarser, shifting from sandy mud to muddy sand, and then to fine sand and medium–coarse sand. The detrital minerals contained in the sediments mainly consist of quartz, feldspar, debris, ilmenite, leucosphenite, and tourmaline, whereas the clay minerals are dominated by kaolinite, followed by illite and smectite. The sediment provenance is mainly terrigenous input from near-source rivers. With sea reclamation and dam construction, outer Qinzhou Bay has experienced enormous morphological variation of its coastline. Together with the channel effect where the velocity of ebb tide is greater than that of flood tide, the underwater topography is characterized by increased scale and height difference of troughs and ridges as well as enhanced offshore deposition.

Research on urban heat mitigation has been growing in recent years with many of the studies focusing on green infrastructure (GI) as a strategy to mitigate the adverse effects of Urban Heat Island (UHI). This paper aims at presenting a review of the range of findings from GI research for urban heat mitigation through a review of scientific articles published during the years 2009-2019. This research includes a review of the different types of GI and its contribution for urban heat mitigation and human thermal comfort. In addition to analyzing different mitigation strategies, numerical simulation tools that are commonly used are also reviewed. It is seen that ENVI-met is one of the modelling tools that is considered as a reliable tool to simulate different mitigation strategies and hence has been widely used in the recent past. Considering its popularity in urban microclimate studies, this article also provides a review of ENVI-met simulation results that were reported in the reviewed papers. It was observed that the majority of the research was conducted on a limited spatial scale and focused on temperature and human thermal comfort.

A COVID-19 disease threatens the population and the economies of the countries significantly. Till now, this pandemic has affected 215 counties or territories. Unavailability of vaccine is the primary concern for the society. To avoid the spread of this disease, social isolation must be preserved and the inter and intra-population movement must be minimized. To reduce the possibility of transmission, the categorization of regions based on susceptibility to COVID-19 infection is a must.Due to the unavailability of a large amount of paper collection for this novel COVID-19 diseases, we used current literature available on a COVID-19 susceptibility of the diabetic patient, human reproductivity, hemodialysis patient’s, pregnant women and meteorological factors and geographical location. Countries in the cold region are more susceptible to the risk of COVID-19 transmission. There was no evidence of the spread of this disease from non-respiratory bodies. Diabetic patients and pregnant women were found to be more susceptible to COVID-19 infection. Anosmia was observed in the majority of the COVID-19 infected cases in European countries. No evidence indicates COVID-19's impact on the human reproductive system explicitly. No cases of vertical transmission of this disease have been observed until now. All the studies available till now is the small scale study. Correlation with something always does not mean causation. There are certain factor like pollution level, temperature Diurnal temperature range, geographical factor, humidity, pollution level, wind speed, population density, medical healthcare facilities social and political factor plays a critical role in transmitting the SARS-COV-2 virus. Besides the adverse effects, it has taught us to shed our selfish goals and to promote the welfare of all.

The paper presents a conceptual model of the route of macroplastic debris (5 > mm) through a fluvial system, which can support future works on the overlooked processes of macroplastic storage and remobilization in rivers. We divided the macroplastic route into (1) input, (2) transport, (3) storage, (4) remobilization and (5) output phases. Phase 1 is mainly controlled by humans, phases 2–4 by fluvial processes, and phase 5 by both types of controls. We hypothesize that natural characteristics of fluvial systems and their modification by dam reservoirs and flood embankments construction are key controls on macroplastic storage and remobilization in rivers. The zone of macroplastic storage can be defined as a river floodplain inundated since the beginning of widespread disposal of plastic waste to the environment in the 1960s and remobilization zone as a part of the storage zone influenced by floodwaters and bank erosion. The amount of macroplastic in both zones can be estimated using data on the abundance of surface- and subsurface-stored macroplastic and the lateral and vertical extent of the zones. Our model creates the framework for estimation of how much plastic has accumulated in rivers and will be present in future riverscapes.

Since the severe acute respiratory syndrome (SARS) outbreak in 2003, human coronaviruses (hCoVs) have been identified as causative agents of severe acute respiratory tract infections. Two more hCoV outbreaks have since occurred, the most recent being SARS-CoV-2, the causative agent of coronavirus disease 2019 (COVID-19). The clinical presentation of SARS and MERS is remarkably similar to COVID-19, with hyperinflammation causing a severe form of the disease in some patients. Previous studies show that the expression of the SARS-CoV E protein is associated with the hyperinflammatory response that could culminate in acute respiratory distress syndrome (ARDS), a potentially fatal complication. This immune-mediated damage is largely caused by a cytokine storm, which is induced by significantly elevated levels of inflammatory cytokines interleukin (IL)-1beta and IL-6, which are partly mediated by the expression of the SARS-CoV E protein. The interaction between the SARS-CoV E protein and the host protein, syntenin, as well as the viroporin function of SARS-CoV E, are linked to this cytokine dysregulation. This review aims to compare the clinical presentation of virulent hCoVs with a specific focus on the cause of the immunopathology. The review also proposes that inhibition of IL-1beta and IL-6 in severe cases can improve patient outcome.

Regulatory B cells (Bregs) with immunosuppressive function are critical in maintaining immune tolerance. In recent years, Bregs is an essential part of the study due to its therapeutic relevance and function in immune tolerance. The positive and negative regulatory role of human Bregs in immune tolerance is being discussed in several pathologies, including in autoimmune diseases, cancers, chronic infections, strokes in multiple reports. The negative regulatory roles of human Bregs are associated with lesser numbers and functional abnormalities in most of these studies, including myasthenia gravis (MG). In this review, the potential findings regarding human Bregs in MG, and Bregs mediated potential therapeutic strategies with its pros and cons have been discussed based on previous and current reports.

Human Cytomegalovirus (HCMV) infection is a serious complication in hematopoietic stem cell transplant (HSCT) recipients due to virus-induced myelosuppression and impairment of stem cell engraftment. Despite the clear clinical link between myelosuppression and HCMV infection, little is known about the mechanism(s) by which the virus inhibits normal hematopoiesis because of the strict species specificity and the lack of surrogate animal models. In this study, we developed a novel humanized mouse model system that recapitulates the HCMV-mediated engraftment failure after hematopoietic cell transplantation. We observed significant alterations in the hematopoietic populations in peripheral lymphoid tissues following engraftment of a subset of HCMV+ CD34+ HPCs within the transplant suggesting that a small proportion of HCMV-infected CD34+ HPCs can profoundly affect HPC differentiation in the bone marrow microenvironment. This model will be instrumental to gain insight into the fundamental mechanisms of HCMV myelosuppression after HSCT and provides a platform to assess novel treatment strategies.

Less aligned emphasis has been given to naming the 2019 novel coronavirus and pandemic disease. Global profusion of squab names has found their ways in daily communication, and our survey promises to articulate that many of them may have contributed to backlash against Chinese people. Here, based on brief critical reviews on the naming of coronavirus and human coronaviruses, we scrutinize a clear sense of pros and cons of previous multifarious names and punctuate heuristic introspection of naming practices. Our findings suggest that full-fledged official names are duly contribute to the resilience of healthy collective usages in current infodemic scenario.

To prevent, mitigate and treat movement impairments, we need to recognize early signs of decline and understand how to best compensate for limitations. The mechanisms leading to movement impairments are complex, overlapping, and interdependent and the fields of biomechanics, motor control, and physiology must be combined to understand these mechanisms. This article introduces CaReMoOC, a framework incorporating neuromusculoskeletal capacity (accumulation of neuromusculoskeletal resources over the lifespan), reserve (task-specific difference between capacity and task demand), movement objectives (considerations made to plan a movement), and compensation (use of NMSK resources to respond to the task demand). The framework is demonstrated for healthy ageing, providing an overview of age-related capacity decline (neural, skeletal, muscular system) and shifted weighting of movement objectives (energy, pain, stability, speed) relevant for biomechanics and motor control. Two forms of compensation are Compensation for Capacity, when capacity does not meet the task demands, and Compensation for Movement Objectives, when the movement is changed due to for example a fear of falling. Understanding the interrelationships between decline in the variables within capacity and the effect on compensation strategies will provide benefit in preventing mobility impairments and will support clinicians in their rehabilitation practice.

High-frequency near-infrared diode laser provides high peak output, low heat accumulation, and efficient biostimulation. Although these characteristics are considered suitable for osteoarthritis (OA) treatment, the effect of high-frequency near-infrared diode laser in in vitro or in vivo OA models has not yet been reported. Therefore, we aimed to assess the biological effects of high-frequency near-infrared diode laser irradiation on IL-1β-induced chondrocyte inflammation in an in vitro OA model. Normal Human Articular Chondrocyte-Knee (NHAC-Kn) cells were stimulated with human recombinant IL-1β and irradiated with high-frequency near-infrared diode laser (910 nm, 4 or 8 J/cm2). The mRNA and protein expression of relevant inflammation- and cartilage destruction-related proteins was analyzed. IL-1β treatment significantly increased the mRNA levels of IL-1β, IL-6, TNF-α, MMP-1, MMP-3, and MMP-13. High-frequency near-infrared diode laser irradiation significantly reduced the IL-1β-induced expression of IL-1β, IL-6, TNF-α, MMP-1, and MMP-3. Similarly, high-frequency near-infrared diode laser irradiation decreased the IL-1β-induced increase in protein expression and secreted levels of MMP-1 and MMP-3. These results highlight the therapeutic potential of high-frequency near-infrared diode laser in OA.

Vegetation in drylands is sensitive to climatic changes and human activities. Remote sensing and spatial analyses provide us useful tools for monitoring long-term vegetation dynamics over large regional scale. In this study, we analyzed the oasis vegetation cover change of the Tarim Basin using Landsat data sets from six epochs, 1975s, 1990s, 2000s, 2005s, 2010s and 2014. The results show that vegetation cover of oases increases from 34600 km² in 1975s to 101000 km² in 2014, though there was a vegetation coverage decrease from 77600 km² in 2000s to 42680 km² in 2010s. The percentage of annul water consumption has increased from 34% in 1970s to 52% in 2010s in the upper Tarim River, and decreased from 15% in 1970s to 9% in 2010s in the lower Tarim River. The decrease of oases area from 2000s to 2010s probably resulted from the rapid urbanization and large scale land reclamation. Although there is an increasing trend for oases coverage, local degradation of oases especially in the northern part occurred. This may be caused by inadequate water supply of the Tarim River. The results of multiple regression show that human activities contribute 70% of oases area change. Human induced water resources reallocation and heat energy balance is the primary cause of total oasis change.

Background Human parvovirus B19, a human pathogen of the erythroparvovirus genus, is responsible for a variety of diseases. Despite less symptoms caused by B19 infection in healthy individuals, this pathogen can not be neglected in specific groups who exhibit severe anemia. Main body of abstract Transient aplastic crisis and pure red cell aplasia are two kinds of anemic hemogram respectively in acute phase and chronic B19 infection, especially occur in individuals with a shortened red cell survival or immunocompromised patients. In addition, B19 infected pregnant women may suffer risks of hydrops fetalis secondary to severe anemia and fetal loss. B19 possesses high affinity to bone marrow and fetal liver due to its extremely restricted cytotoxicity to erythroid progenitor cells mediated by viral proteins. The nonstructural protein NS1 is considered to be the major pathogenic factor, which takes parts in differentiational inhibition and apoptosis of erythroid progenitor cells through inducing viral DNA damage responses and cell cycle arrest. The time phase property of NS1 activity during DNA replication and conformity to transient change of hemogram are suggestive of its role in regulating differentiation of hematopoietic cells, which is not completely understood. Conclusion In this review, we set up a hypothetic bridge between B19 NS1 and Notch signaling pathway or transcriptional factors GATA which are essential in hematopoiesis, to provide a new insight of the potential mechanism of B19-induced differentiational inhibition of erythroid progenitor cells.

Abstract: Periodontal disease is the main reason for tooth loss in adults. Tissue engineering and regenerative medicine are the advanced technologies used to manage soft and hard tissue defects caused by periodontal disease. We developed a transforming growth factor-β3 chitosan sponge (TGF-β3/CS) to repair periodontal soft and hard tissue defects. We investigated the proliferation and osteogenic differentiation behaviors of primary human periodontal ligament stem cells (hPDLSCs) to discuss the bioactivity and application of TGF-β3 in periodontal disease. We separately used Calcein-AM/PI double-labeling or CM-Dil-labeling coupled with fluorescence microscopy to trace the survival and function of the cells after implantation in vitro or in vivo. The mineralization of osteogenic differentiated hPDLSCs was confirmed by measuring ALP activity and calcium content. The levels of COL I, ALPL, TGF-βRI, TGF-βRII, and Pp38/t-p38 were tested using Western blot to explore the mechanism of bone repair prompted by TGF-β3. When hPDLSCs were inoculated with different concentrations of TGF-β3/CS (62.5–500 ng/mL), ALP activity was the highest in TGF-β3 (250 ng/mL) group after seven days (P < 0.05 vs. control); the calcium content in each group increased significantly after 21 and 28 days (P < 0.001 vs. control). The best result was achieved in the TGF-β3 (500 ng/mL) group. All results showed that TGF-β3/CS can promote osteogenic differentiation of hPDLSC and may be involved in the p38 MAPK signaling pathway. TGF-β3/CS has the potential for application in the repair of incomplete alveolar bone defects.

The cooperation between humans and robots is becoming increasingly important in our society. Consequently, there is a growing interest in the development of models that can enhance the interaction between humans and robots. A key challenge in the Human-Robot Interaction (HRI) field is to provide robots with cognitive and affective capabilities, developing architectures that let them establish empathetic relationships with users. Several models have been proposed in recent years to solve this open-challenge. This work provides a survey of the most relevant attempts/works. In details, it offers an overview of the architectures present in literature focusing on three specific aspects of HRI: the development of adaptive behavioural models, the design of cognitive architectures, and the ability to establish empathy with the user. The research was conducted within two databases: Scopus and Web of Science. Accurate exclusion criteria were applied to screen the 1007 articles found (at the end 30 articles were selected). For each work, an evaluation of the model is made. Pros and cons of each work are detailed by analysing the aspects that can be improved so that an enjoyable interaction between robots and users can be established.

The PI3K-AKT-mTOR signal transduction pathway regulates a variety of biological processes including cell growth, cell cycle progression and proliferation, cellular metabolism and cytoskeleton reorganization. Fine-tuning of the PI3K pathway signaling output is essential for the maintenance of tissue homeostasis and uncontrolled activation of this cascade leads to a number of human pathologies including cancer. Inactivation of the tumour suppressor phosphatase PTEN and/or activating mutations in the proto-typical lipid kinase PI3K have emerged as some of the most frequent events associated with human cancer and as a result the PI3K pathway has become a highly sought-after target for cancer therapies. In this review we summarize the essential role of the PTEN-PI3K axis in controlling cellular behaviors by modulating activation of key proto-oncogenic molecular nodes and functional targets. Further, we highlight important functional redundancies and peculiarities of these two critical enzymes that over the last few decades have become a central part of the cancer research field and have instructed hundreds of pre-clinical and clinical trials to better cancer treatments.

Although current antiretroviral drug therapy can suppress human immunodeficiency virus (HIV) replication, a lifelong prescription is necessary to avoid viral rebound. The problem of persistent and ineradicable viral reservoirs in HIV-infected people continues to be a global threat. In addition, some HIV-infected patients do not experience sufficient T-cell immune restoration despite being aviremic during treatment, and this is likely due to altered hematopoietic potential. To achieve global eradication of HIV disease, a cure is needed. To this end, tremendous efforts have been made in the field of anti-HIV gene therapy. This review will discuss the concepts of HIV cure and relative viral attenuation and provide an overview of various gene therapy approaches aimed at a complete or functional HIV cure and protection of hematopoietic functions.

Research on bidirectional human-machine interfaces will enable the smooth interaction with robotic platforms in contexts ranging from industry to tele-medicine and rescue. This paper introduces a bidirectional communication system to achieve multisensory telepresence during the gestural control of an industrial robotic arm. We complement the gesture-based control by means of a tactile-feedback strategy grounding on a spiking artificial neuron model. Force and motion from the robot are converted in neuromorphic haptic stimuli delivered on the user’s hand through a vibro-tactile glove. Untrained personnel participated in an experimental task benchmarking a pick-and-place operation. The robot end-effector was used to sequentially press six buttons, illuminated according to a random sequence, and comparing the tasks executed without and with tactile feedback. The results demonstrated the reliability of the hand tracking strategy developed for controlling the robotic arm, and the effectiveness of a neuronal spiking model for encoding hand displacement and exerted forces in order to promote a fluid embodiment of the haptic interface and control strategy. The main contribution of this paper is in presenting a robotic arm under gesture-based remote control with multisensory telepresence, demonstrating for the first time that a spiking haptic interface can be used to effectively deliver on the skin surface a sequence of stimuli emulating the neural code of the mechanoreceptors beneath.

As a universal pathogen leading to neonatal defects and transplant failure, Human cytomegalovirus (HCMV) has strict species specificity that the inability to using this virus in animals has hampered its pathogenesis study. However, the mechanism of cross-species barrier remains elusive that no non-human cell model has been established to fill this knowledge gap. We observed that primary dermis fibroblasts (TSDF) isolated from the Chinese tree shrew (Tupaia belangeri chinensis), a small laboratory animal with close affinity to primates, were permissive to HCMV replication. In TSDF infected with GFP-expressing HCMV, the green fluorescence and cytopathic effect were observed and the expression of 3 kinetic genes and replication of viral genome were detected. The cell-free viruses produced in TSDF reached 103 pfu/mL at 96 hpi, which were 10-fold lower than in primary human foreskin fibroblasts. Our results demonstrated that TSDF supported low level of lytic replication of HCMV. The TSDF model provides a useful platform for the mechanism study of species barrier of HCMV.

Cariogenic oral biofilms cause a considerable amount of recurrent dental caries around composite restorations every year, resulting in unprosperous oral health status and expensive restorative treatment for many patients. Quaternary ammonium monomers that can be copolymerized with the current dental resin systems have been increasingly explored for modulation of dental plaque biofilm growth over dental composite surfaces. Here, we investigated the effect of bis(2-methacryloyloxyethyl) dimethylammonium bromide (QADM), against human overlying mature oral biofilms grown intra-orally in human participants for 7 and 14 days, for the first time. Seventeen volunteers wore palatal devices containing composite specimens containing 10% by mass of QADM or a control composite without QADM. After 7 and 14 days, the adherent biofilms were collected for determination of bacterial counts via colony-forming unit (CFU) counts. The biofilm viability, chronological changes, and percentage coverage were also determined by live/dead staining. QADM composites caused a significant inhibition of S. mutans biofilm formation for up to seven days. No difference in the CFU values were found for the 14-day period. Our findings suggest that (1) QADM composite was successful in inhibiting 1-3 day biofilms in the oral environment in vivo; (2) QADM significantly reduced the portion of S.mutans group in a time course where patients at high risk of caries would develop initial enamel carious lesions; and (3) stronger antibiofilm activity is required for the control of mature long-term cariogenic biofilms. These results provide a perspective on the value of integrating bioactive restorative materials with traditional caries management approaches into clinical practice. Contact-killing strategies via dental materials aiming to prevent or at least reduce high numbers of cariogenic bacteria seem to be a promising approach in patients at high risk of recurrence of dental caries around composites.

In this work we report on our effort to design and implement an early introduction to basic robotics principles for children at kindergarten age. The humanoid robot Pepper, which is a great platform for human-robot interaction experiments, was presenting the lecture by reading out the contents to the children making use of its speech synthesis capability. One of the main challenges of this effort was to explain complex robotics contents in a way that pre-school children could follow the basic principles and ideas using examples from their world of experience. A quiz in a Runaround-game-show style after the lecture activated the children to recap the contents they acquired about how mobile robots work in principle. Besides the thrill being exposed to a mobile robot that would also react to the children, they were very excited and at the same time very concentrated. What sets apart our effort from other work is that part of the lecturing is actually done by a robot itself and that a quiz at the end of the lesson is done using robots as well. To the best of our knowledge this is one of only few attempts to use Pepper not as a tele-teaching tool, but as the teacher itself in order to engage pre-school children with complex robotics contents. We got very positive feedback from the children as well as from their educators.

Integration of multi-view datasets which are comprised of heterogeneous sources or different representations is challenging to understand the subtle and complex relationship in data. Such data integration methods attempt to combine efficiently the complementary information of multiple data types to construct a comprehensive view of underlying data. Nonnegative matrix factorization (NMF), an approach that can be used for signal compression and noise reduction, has aroused widespread attention in the last two decades. The Kullback–Leibler divergence (or relative entropy) information distance can be used to measure the loss function of NMF. In this article, we propose a fast and robust framework (RSNMF) based on symmetric nonnegative matrix factorization (SNMF) and similarity network fusion (SNF) for clustering human microbiome data including functional, metabolic and phylogenetic profiles. Many existing methods typically utilize all the information provided by each view to create a consensus representation, which often suffers a lot from noise in data and cannot provide a precise representation of the latent data structures. In contrast, RSNMF combines the strength of SNMF and the advantage of SNF to form a robust clustering indicator matrix thus can reduce the noise influence. We conduct experiments on one synthetic and two real dataset (microbiome data, text data) and the results show that the proposed RSNMF has better performance over the baseline and the state-of-art methods, which demonstrates the potential application of RSNMF for microbiome data analysis.

Video quality assessment (VQA) plays an important role in video applications for quality evaluation and resource allocation. It aims to evaluate the video quality consistent with the human perception. In this letter, a hierarchical gradient similarity based VQA metric is proposed inspired by the structure of the primate visual cortex, in which visual information is processed through sequential visual areas. These areas are modeled with the corresponding measures to evaluate the overall perceptual quality. Experimental results on the LIVE database show that the proposed VQA metric significantly outperforms the state-of-the-art VQA metrics.

Vascular cell adhesion molecule-1 (VCAM-1) is closely associated with tumor progression and metastasis. However, the relevance and role of VCAM-1 in lung cancer have not been clearly elucidated. In this study, we found that VCAM-1 was highly overexpressed in lung cancer tissue compared with that of normal lung, and high VCAM-1 expression correlated with poor survival of lung cancer patients. VCAM-1 knockdown reduced invasion in A549 human lung cancer cells, and competitive blocking experiments targeting the Ig-like domain 6 of VCAM-1 (VCAM-1-D6) demonstrated that the VCAM-1-D6 domain was critical for VCAM-1-mediated A549 cell invasion. Next, we developed a human monoclonal antibody specific to human and mouse VCAM-1-D6 (VCAM-1-D6 huMab), which was isolated from a human synthetic antibody library using phage display technology. Finally, we showed that VCAM-1-D6 huMab had a nanomolar affinity for VCAM-1-D6 and that it potently suppressed invasion in A549 and NCI-H1299 lung cancer cell lines. Taken together, these results suggest that VCAM-1-D6 is a novel therapeutic target in VCAM-1-mediated lung cancer invasion and that our newly developed VCAM-1-D6 huMab will be a useful tool for inhibiting VCAM-1-expressing lung cancer cell invasion.

Mesenchymal Stem Cells derived from bone marrow (hBM-MSCs) are utilized in tendon tissue‐engineering protocols while extra-embryonic cord-derived, including from Wharton’s Jelly (hWJ-MSC), are emerging as useful alternatives. To explore the tenogenic responsiveness of hBM-MSCs and hWJ-MSCs to hGDF-5 we supplemented each at doses of 1, 10, and 100 ng/mL and determined proliferation, morphology and time-dependent expression of tenogenic markers. We evaluated expression of Collagen types 1 (COL1A1) and 3 (COL3A1), Decorin (DCN), Scleraxis A (SCX-A), Tenascin-C (TNC) and Tenomodulin (TNMD) noting the earliest and largest increase with 100 ng/mL. With 100 ng/mL, hBM-MSCs showed upregulation of SCX-A (1.7-fold) at day 1, TNC (1.3-fold) and TNMD (12-fold) at Day 8. hWJ-MSCs, at the same dose, showed up-regulation of COL1A1 (3-fold), DCN (2.7-fold), SCX (3.8-fold) and TNC (2.3-fold) after 3 days of culture. hWJ-MSCs also showed larger proliferation rate and marked aggregation into a tubular shaped system at Day 7 (with 100 ng/mL of hGDF-5). Simultaneous to this we explored expression of pro-inflammatory (IL-6, TNF, IL-12A, IL-1β) and anti-inflammatory (IL-10, TGF-β1) cytokines across for both cell types. hBM-MSCs exhibited a better balance of pro-inflammatory and anti-inflammatory cytokines upregulating IL-1β (11-fold) and IL-10 (10-fold) at Day 8; hWJ-MSCs, had a slight expression of IL-12A (1.5-fold) but a greater up-regulation of IL-10 (2.5-fold). Collagen type I and tenomodulin proteins, detected by immunofluorescence, confirming the greater protein expression when 100 ng/mL were supplemented. In the same conditions, both cell types showed specific alignment and shape modification (fibroblast-like) with a Lenght/Width ratio increase at value higher than 1, suggesting their response in activating tenogenic commitment events, and they both potential use in 3D in vitro tissue engineering protocols.

Gaining insight into tribological systems is crucial for optimizing efficiency and prolonging operational lifespans in technical systems. Experimental investigations are time-consuming and costly, especially for reciprocating seals in fluid power systems. Elastohydrodynamic lubrication (EHL) simulations offer an alternative but demand significant computational resources. Physics-informed neural networks (PINNs) provide a promising solution using physics-based approaches to solve partial differential equations. While PINNs have successfully modeled hydrodynamics with stationary cavitation, they have yet to address transient cavitation with dynamic geometry changes. This contribution applies a PINN framework to predict pressure build-up and transient cavitation in sealing contacts with dynamic geometry changes. The results demonstrate the potential of PINNs for modeling tribological systems and highlight their significance in enhancing computational efficiency.

To make wind power more competitive, it is necessary to reduce turbine downtime and reduce costs associated with wind turbine Operation and Maintenance (O&amp;M). Incorporating machine learning in developing condition-based predictive maintenance methodologies for wind turbines can enhance their efficiency and reliability. This paper presents a monitoring method that utilizes Base Density for the Support Vector Machine (BDSVM) and the evolutionary Fourier spectra of vibrations. This method allows smart monitoring of the function evolution of the turbine. A complex optimal function (FO) for 5-degree order has been developed that will be the boundary function of the BDSVM to timely determine the magnitude, frequency, and place of the failure occurring in wind turbine drive.

Smart farm is a technology that greatly helps improve the productivity and quality of crops and is being actively introduced into indoor environments such as green houses. However, it has not yet been distributed to field-grown crops. The main reason is that, unlike indoor environments, it is very difficult to collect sensor data for monitoring the growth environment of crops in open fields where weather conditions change significantly and power supply is difficult. Additionally, because various sensors are used, the data formats of the devices are different, making it difficult to process. This paper presents a field crop growth environment monitoring and big data analysis system. The proposed system first solves power supply and data communication problems using solar power generation and LPWA technology. Additionally, based on the oneM2M architecture, data from various sensors is transmitted to the server using standardized technology. The transmitted data is stored and managed on the server as big data, and can be used to predict the production and quality of field-grown crops and take appropriate measures. The proposed system is expected to create an environment optimized for the growth of field crops and help prevent and manage diseases.

Advanced machine learning algorithms, have the potential to be successfully applied to many areas of system modelling. In the present study the capability of ten machine learning algorithms in predicting the structural damage of an 8-storey reinforced concrete frame building subjected to single and successive ground motions is examined. From this point of view, the initial damage state of the structural system, as well as 16 well known ground motion intensity measures are adopted as the features of the machine-learning algorithms that aim to predict the structural damage after each seismic event. The structural analyses are performed considering both real and artificial mainshock–aftershock sequences, while the structural damage is expressed in terms of two overall damage indices. The comparative study results in the most efficient damage index, as well as the most promising machine learning algorithm in predicting the structural response of a reinforced concrete building under single or multiple seismic events. Finally, the configured methodology deployed in a user-friendly web-application.

Traffic Inspection (TI) work in this article is positioned as a specific module of road traffic with its primary function oriented towards monitoring and controlling safe traffic and the execution of significant events within a particular geographic area. Exploratory research on the significance of event execution in simple, complicated and complex traffic flow and process situations is related to the activities of monitoring and controlling functional states and performance of categorical variables, which include objects and locations of road infrastructure, communication infrastructure and networks of traffic inspection resources. It is emphasized that the words “work” and “traffic” have the semantic status as synonyms (in one world language), which is explained in the design of the Agent-based model of the complexity of content and contextual structure of TI work at the singular and plural level with 12 points of interest (POI) in the thematic research. An Event Execution Log (EEL) was created for on-site data collection with eight variables, seven of which are independent (event type, activities, objects, locations, host, duration-period and periodicity of the event) and one dependent (significance of the event) variable. The structured data set includes 10,994 input-output vectors in 970 categories collected in the EEL created by 32 human agents (traffic inspectors) over a 30-day period. An algorithmic presentation of the methodological research procedure for preprocessing and final data processing in the ensemble of machine learning models for classification and selection of TI tasks is given. Data cleaning was performed on the available dataset to increase data consistency for further processing. Vector elimination was carried out based on the Location variable, such that the total number of vectors equals the number of unique categories of this variable, which is 636. The main result of this research is the Classification modeling of the significance of events in TI work based on machine learning techniques and the Stacking ensemble. The created machine learning models for event significance classification modeling have high accuracy values. To evaluate the performance metrics of the Stacking ensemble of models, the confusion matrix, Precision, Recall, ND F1-score are used.

The increasing need for autonomy for space exploration missions is becoming more and more relevant in the design of missions to small bodies. The long communication latencies and sensitivity of the system to unplanned environment perturbations pose autonomous methods as a key design block for this type of mission. In this work, a fully autonomous gnc methodology is introduced. This methodolody relies on published cnn-based techniques for surface recognition and pose estimation and on also existing mpc-based techniques for the design of a trajectory to perform a soft landing on an asteroid. Combining hda with relative navigation systems, a gsm is built on-the-fly as images are acquired. These gsms provide the gnc system with information about feasible landing spots and populate a longitude-latitude map with safe/hazardous labels that are later processed to find an optimal landing spot based on mission requirements and a distance-from-hazard metric. The methodology is exemplified using Bennu as the body of interest and a gsm is built for an arbitrary reconnaissance orbit.

Wildfires increasingly threaten ecosystems and infrastructure, making accurate burn severity mapping (BSM) essential for effective disaster response and environmental management. Machine learning (ML) models utilizing satellite-derived vegetation indices are crucial for assessing wildfire damage; however, incorporating many indices can lead to multicollinearity, reducing classification accuracy. While Principal component analysis (PCA) is commonly used to address this issue, its effectiveness relative to other feature extraction (FE) methods in BSM remains un-derexplored. This study aims to enhance ML classifier accuracy in BSM by evaluating various FE techniques that mitigate multicollinearity among vegetation indices. Using composite burn index (CBI) data from the 2014 Carlton Complex fire in the United States as a case study, we extracted 118 vegetation indices from seven Landsat-8 spectral bands. We applied and compared 13 different FE techniques—including linear and nonlinear methods such as PCA, t-distributed stochastic neighbor embedding (t-SNE), linear discriminant analysis (LDA), Isomap, uniform manifold approximation and projection (UMAP), factor analysis (FA), independent component analysis (ICA), multidimensional scaling (MDS), truncated singular value decomposition (TSVD), non-negative matrix factorization (NMF), locally linear embedding (LLE), spectral embedding (SE), and neighborhood components analysis (NCA). The performance of these techniques was benchmarked against six ML classifiers to determine their effectiveness in improving BSM accu-racy. Our results show that alternative FE techniques can outperform PCA, improving classifica-tion accuracy and computational efficiency. Techniques like LDA effectively captured nonlinear relationships critical for accurate BSM. The study contributes to the existing literature by providing a comprehensive comparison of FE methods, highlighting the potential benefits of underutilized techniques in BSM

The revolution of physiotherapy is achieved by the application of artificial intelligence (AI) in medical rehabilitation programs. While the integration of virtual reality (VR) and robotics has already marked significant strides in the industry, AI is taking patient rehabilitation to new heights. The integration of AI, VR and robotics in physiotherapy linked to a significant leap forward in patient rehabilitation. These technologies not only increase the effectiveness of the treatment, but also make it more accessible and attractive. In this article, we propose to study the use of AI in the management of medical rehabilitation programs, and we present a comprehensive survey of the latest empirical studies, highlighting AI-based technologies that facilitate the rehabilitation process, trying to demonstrate that the integration of AI in medical rehabilitation programs offers a transformative approach to patient care.

In Kenya, Rift Valley Fever (RVF) outbreaks pose significant challenges, being one of the most severe climate-sensitive zoonoses. While Machine Learning (ML) techniques have shown superior performance in time series forecasting, their application in predicting disease outbreaks in Africa remains under explored. Leveraging data from the International Livestock Research Institute (ILRI) in Kenya, this study pioneers the use of ML techniques to forecast RVF outbreaks by analysing climate data spanning from 1981 to 2010, including machine learning models. Through a comprehensive analysis of ML model performance and the influence of environmental factors on RVF outbreaks, this study provides valuable insights into the intricate dynamics of disease transmission. The XGB Classifier emerged as the top-performing model, exhibiting remarkable accuracy in identifying RVF outbreak cases, with an accuracy score of 0.997310. Additionally, positive correlations were observed between various environmental variables, including rainfall, humidity, and claypatterns, and RVFcases, underscoring the critical role of climatic conditions in disease spread. These findings have significant implications for public health strategies, particularly in RVF-endemic regions, where targeted surveillance and control measures are imperative. However, the study also acknowledges the limitations in model accuracy, especially in scenarios involving concurrent infections with multiple diseases, highlighting the need for ongoing research and development to address these challenges. Overall, this study contributes valuable insights to the field of disease prediction and management, paving the way for innovative solutions and improved public health outcomes in RVF-endemic areas and beyond.

The valorization and dissolution of lignin using ionic liquids (ILs) is critical for developing sustainable biorefineries and a circular bioeconomy. This review aims to critically assess the current state of computational and machine learning methods for understanding and optimizing IL-based lignin dissolution and valorization processes reported since 2022. The paper examines various computational approaches, from quantum chemistry to machine learning, highlighting their strengths, limitations, and recent advances in predicting and optimizing lignin-IL interactions. Key themes include the challenges in accurately modeling lignin’s complex structure, the development of efficient screening methodologies for ionic liquids to enhance lignin dissolution and valorization processes, and the integration of machine learning with quantum calculations. These computational advances will drive progress in IL-based lignin valorization by providing deeper molecular-level insights and facilitating the rapid screening of novel IL-lignin systems.

One of the most hotly debated topics in technology is the transparency between AI models and humans. As artificial intelligence (AI) continues to permeate various sectors, the demand for transparency in AI decision-making has become increasingly critical. This paper presents a comprehensive review of Explainable Artificial Intelligence (XAI), examining 57 key studies that focusing on various explanation approaches and their impact on the trust and accountability of end-users. Recognizing the obstacles resulting from the black-box nature of AI models, this work focuses on the need for the proper methods that can be used in the explanation process, enabling both people and AI models to work together. The findings highlight the importance of XAI in enhancing trust, particularly in complex environments such as healthcare and finance, and propose directions for future research to further develop reliable and interpretable AI solutions.

Employee turnover is a significant issue for financial institutions, impacting productivity, increasing recruitment costs, and disrupting critical operations. In this project, this study aimed to predict employee turnover using a dataset containing attributes such as employee satisfaction, performance, and tenure. By framing the task as a binary classification problem, this study employed CatBoost and XGBoost, two advanced regression-based algorithms, to develop predictive models. This paper's analysis demonstrated that CatBoost outperformed XGBoost across all evaluation metrics, including MAE, MSE, RMSE, and R², making it the more effective model for predicting turnover in the financial sector. The study highlights key factors contributing to employee attrition, such as job satisfaction, tenure, and promotion opportunities, offering actionable insights for retention strategies. Additionally, by predicting probabilities rather than binary outcomes, this study aims to make more detailed decisions about employee retention. This research provides valuable tools for financial institutions to mitigate the risk of turnover, retain critical talent, and ensure operational continuity.

From some perspective, every natural phenomenon is just a combination of many elementary random events clustering and forming a pattern. Nonetheless, the nature of random events differs from one field of study to another. This research is an attempt to determine whether volatile stock price movement, considered random, accords to the randomness of real world phenomena. To accomplish the task, a deep learning model was built, trained on preprocessed data and evaluated to calculate it's accuracy. The acquired results were then compared, and it turned out that stock prices are very similar in randomness to natural phenomena as the model trained on large amounts of stock data was increasing the accuracy of predictions of all real world parameters.

Class Incremental Learning (CIL) has emerged as a vital machine learning paradigm, particularly suited for environments with continuous data streams, such as those encountered in the financial industry. CIL enables models to progressively acquire and accumulate new knowledge without retraining the entire dataset, making it highly efficient for dynamic financial markets. In this paper, we explore the application of CIL to financial data streams, where high-frequency, high-dimensional data, such as stock prices and cryptocurrency transactions, evolve rapidly. The challenges inherent in CIL, including catastrophic forgetting—where the model loses previously learned knowledge—and intransigence—where it resists learning new classes—are addressed through both regularization-based techniques and dynamic architecture expansion. We present a comprehensive analysis of the algorithms designed to mitigate these challenges and highlight their relevance in financial applications like algorithmic trading, portfolio management, risk assessment, and fraud detection. By demonstrating how CIL enables models to adapt to new market conditions and asset classes while retaining past knowledge, we illustrate its critical role in advancing real-time financial decision-making. Through a detailed examination of the methodologies and their applications, this paper aims to provide insights into the future of adaptive financial models using Class Incremental Learning. We have also summarized methodologies into a model optimization-based class and a data focused class.

Deep-learning-based convection schemes receive wide attention due to its impressive im-provement on precipitation distribution and tropical convections of earth system simulation. But they cannot represent the stochasticity of moist physics, which will degrade the simulation of large-scale circulations, climate mean, and variability. To solve this problem, a stochastic pa-rameterization scheme based on probabilistic diffusion model named DIFF-MP is developed. The cloud-resolving data from GRIST model is coarse-grained into resolved-scale variables and sub-grid contributions due to moist physics to form the training data. DIFF-MP’s performance is compared against generative adversarial network and variational autoencoder. Results show that DIFF-MP is consistently better than the other two models on prediction error, coverage ratio, and spread-skill correlation. The standard deviation, skewness, and kurtosis of subgrid contributions generated by DIFF-MP is also closer to the testing data than the others. Interpretability experiment shows that DIFF-MP’s parameterization of moist physics is physically reasonable.

Objective: Despite long simulation times, recently developed finite element analysis (FEA) models of knee joints have demonstrated their suitability for predicting individual risk of onset and progression of knee osteoarthritis. Therefore, the objective of this study was to assess the feasibility of machine learning (ML) to replicate outcomes obtained from FEA when simulating mechanical responses and predicting cartilage degeneration within knee joint. Design: Two ML models based on the Gaussian Process Regression (GPR) algorithms were developed. The first model (GPR1) utilized age, weight, and anatomical joint dimensions as predictor variables to predict tissue mechanical responses and cartilage degeneration based on FEA data. The second model (GPR2) utilized age, weight, height, and gender to predict anatomical joint dimensions, which were then used as inputs in the GPR1 model. Finally, the GPR1 and combined GPR1+GPR2 models were used to investigate the importance of clinical imaging when making personalized predictions for knees from healthy subjects with no history of knee injuries. Results: In the GPR1 model, R2 of 0.9 was exceeded for most of the predicted mechanical parameters. The GPR2 model was able to predict knee shape with R2 of 0.67 - 0.9. Both GPR1 and combined GPR1+GPR2 models offered equally good performance (AUC = 0.73 - 0.74) at classifying patients at high risk for the onset and development of knee osteoarthritis. Conclusions: In the future, real-time and easy-to-use GPR models may provide a rapid technology to evaluate mechanical responses within knee for researchers or clinicians who have no former knowledge from FEA.

This study explores the industrial property market in Hong Kong, a sector characterized by its unique features and atypical market behaviour. Particularly, this research employs machine learning techniques to predict property prices based on a set of features, including location, square footage, floor level, accessibility to mass transit railway station and the like. To ensure transparency and understanding, the Shapley value is employed to quantify the relative importance of each feature in predicting property prices. Our analysis reveals the existence of non–linear relationships among these features, as demonstrated by the wide distribution of SHAP values for most features, which are illustrated in a beeswarm plot that span both sides of the baseline. This finding indicates a complex interaction among such features as square footage, age, floor level, carpark, proximity to mass transit railway stations, location, and property prices. The results contribute valuable insights into the relationships between industrial property characteristics and their corresponding values, thereby equipping stakeholders with enhanced understanding of the market to support informed decision–making.

The spread of false information can significantly harm public opinion, underscoring the importance of accurately identifying untrustworthy news. This paper presents an innovative machine learning (ML) tool, TMining, designed to evaluate news credibility and facilitate various text-mining tasks. By examining a range of ML methodologies alongside preprocessing techniques, we aim to boost the system's effectiveness. Our research meticulously assesses different datasets, highlights the impact of applying stemming techniques, and employs Local Interpretable Model-Agnostic Explanations (LIMEs) to shed light on the rationale behind model predictions. The outcomes reveal a notable enhancement in both the precision and clarity of the news verification process. The ultimate version of the model has been made available as an Application Program Interface (API), and its source code has been shared openly, encouraging further exploration and collaboration within the scientific community. This initiative advances our ability to discern manipulative context from fictitious content and promotes transparency and understanding in the domain of ML applications.

Streamflow forecasting is of great importance in water resources management and flood warnings. Machine learning techniques can be utilized to assist with river flow forecasting. By analyzing historical time series data on river flows, weather patterns, and other relevant factors, machine-learning models can learn patterns and relationships to present predictions about future river flows. In this study, an Autoregressive Integrated Moving Average (ARIMA) model is constructed to predict the monthly flows of the Athabasca River at three monitoring stations: Hinton, Athabasca, and Fort MacMurray, in Alberta, Canada. The three monitoring stations upstream, midstream, and downstream were selected to represent the different climatological regimes of the Athabasca River. Time series data were used for the model training to identify patterns and correlations using moving averages, exponential smoothing, and Holt-Winters' method. The model's forecasting was compared against the observed data. The results show that the determination coefficients were 0.99 at all three stations, indicating strong correlations. The root mean square errors (RMSEs) were 26.19 at Hinton, 61.1 at Athabasca, and 15.703 at Fort MacMurray, respectively, and the mean absolute percentage errors (MAPEs) were 0.34%, 0.44%, and 0.14%, respectively. Therefore, the ARIMA model captured the seasonality patterns and trends in the stream flows at all three stations and demonstrated a robust performance for hydrological forecasting. This provides insights and predictions for water resources management and flood warnings.

The quality of wine depends upon the quality of the grapes, which, in turn, are affected by different viticulture aspects and the climate during the grape-growing season. Obtaining wine professionals’ judgments of the intrinsic qualities of selected wine products is a time-consuming task. It is also expensive. Instead of waiting for the wine to be produced, it is better to have an idea of the quality before harvesting, so that wine growers and wine manufacturers can use high-quality grapes. The main aim of the present study was to investigate the use of machine learning aspects in predicting wine quality and to develop a pipeline which represents the major steps from vineyards to wine quality indices. This pipeline outputs the predicted yield, values for basic parameters of grape juice composition, values for basic parameters of the wine composition, and quality. We also found that the yield could be predicted because of input data related to the characteristics of the vineyards. Finally, through the creation of a web-based application, we have investigated the balance berry yield and wine quality. Using these tools further developed, vineyard owners should be able to predict the quality of the wine they intend to produce from their vineyards before the grapes are even harvested.

Quantifying methane emissions is essential for meeting near-term climate goals and typically done using methane concentrations measured downwind of the source. One major source of methane that is important to observe and promptly remediate is fugitive emissions from oil and gas productions sites but installing methane sensors at the thousands of sites within a production basin is expensive. In recent years, relatively inexpensive metal oxide sensors have been used to measure methane concentrations at production sites. Current methods used to calibrate metal oxide sensors have been shown to have significant shortcomings resulting in limited confidence in methane concentrations generated by these sensors. To address this, we investigate using machine learning (ML) to generate a model that converts metal oxide sensor output to methane mixing ratios. To generate test data, two metal oxide sensors, TGS2600 and TGS2611, were collocated with a trace methane analyzer downwind of controlled methane releases. Over the duration of the measurements, the trace gas analyzer’s average methane mixing ratio was 2.40 ppm with a maximum of 147.6 ppm. The average calculated methane mixing ratios for the TGS2600 and TGS2611 using the ML algorithm were 2.42 ppm and 2.40 ppm with maximum values of 105.9 ppm and 106.3 ppm, respectively. A comparison of histograms generated using the analyzer and metal oxide sensors mixing ratios show overlap coefficients of 0.95 and 0.94 for the TGS2600 and TGS2611, respectively. Overall, our results showed there was a good agreement between the ML derived metal oxide sensors’ mixing ratios and those generated using the more accurate trace gas analyzer. This suggests that the response of lower-cost sensors calibrated using ML could be used to generate mixing ratios with precision and accuracy comparable to higher price trace methane analyzers. This would improve confidence in low-cost sensors’ response, reduce the cost of sensor deploying, and allow for timely and accurate tracking of methane emissions.

Federated Learning (FL) represents a promising distributed learning methodology, particularly suitable for dynamic and heterogeneous environments characterized by the presence of Internet of Things (IoT) devices and Edge Computing infrastructures. In this context, FL allows you to train machine learning models directly on edge devices, mitigating data privacy concerns and reducing latency due to transmitting data to central servers. However, the heterogeneity of computational resources, the variability of network connections, and the mobility of IoT devices pose significant challenges to the efficient implementation of FL. This work explores advanced techniques for dynamic model adaptation and heterogeneous data management in edge computing scenarios, proposing innovative solutions to improve the robustness and efficiency of federated learning. We present an innovative solution based on Kubernetes which enables the fast application of FL models to Heterogeneous Architectures. Experimental results demonstrate that our proposals can improve the performance of FL in IoT and edge environments, offering new perspectives for the practical implementation of decentralized intelligent systems.

This study investigates the possibility of using machine learning models created in DeepLabCut and Create ML to automate aspects of behavioral coding and aid in behavioral analysis. Two models with different capabilities and complexities were constructed and compared to a manually observed control period. The accuracy of the models was assessed before being applied to 7 nights of footage of the nocturnal behavior of two African elephants (Loxodonta africana). The resulting data was used to draw conclusions regarding behavioral differences between the two elephants and between individually observed nights, thus proving that such models can aid researchers in be-havioral analysis. The models were capable of tracking simple behaviors with high accuracy, but had certain limitations regarding detection of complex behaviors, such as the stereotyped behavior sway, and displayed confusion when deciding between visually similar behaviors. Further expansion of such models may be desired to create a more capable aid with the possibility of automating behavioral coding.

Soil salinization is an essential risk factor for agricultural development as well as for food security, and how to obtain regional soil salinity information more reliably remains a priority problem to be solved. To improve the accuracy of the inversions for soil salinity, a new inversion model for soil salinity based on stacking integrated algorithm for learning was submitted for this work which took the prediction results of several basic models as new features and then trained a secondary model to fuse the prediction results of basic models. We compared and analyzed it against four machine learning regression models, namely, random forest (RF), back propagation neural network, support vector regression, and convolutional neural network. Findings indicated the stacking integrated learning regression model fitted better and had good stability, on the test set, the stacking integrated learning regression model showed a relative increase of 8.16% in R2, a relative decrease of 13.95% in RMSE, and a relative increase of 6.47% in RPD when compared to the RF model, which was the single most effective machine learning regression model, and the stacking model was able to achieve soil salinity inversion more accurately. The soil salinity in the oasis areas of the Manas River Basin tended to decrease from north to south in 2016 to 2020 from a spatial point of view, and it was reduced in April from a temporal point of view. The percentage of pixels with a high soil salinity content of 2.75–2.8 g/kg in the study area had decreased by 19.64% in April 2020 compared to April 2016. The innovatively constructed stacking integrated learning regression model improved the accuracy of soil salinity estimation on the basis of the superior results obtained in the training of the single optimal machine learning regression model. As a consequence, this model can provide technological backup for a fast monitoring and inversion of soil salinity as well as prevention and containment of salinization.

Artificial Intelligence (AI) and Machine Learning (ML) are rapidly advancing. These technologies have significantly impacted the consumer goods market, including the smart footwear industry. AI and ML are extensively utilized in the design and production of smart and agile footwear. There are various methods for manufacturing smart footwear, which can be categorized based on their applications. These include medical and healthcare smart footwear, assistive footwear for individuals with impairments, footwear designed for navigation in unfamiliar areas, foot-wear for studying foot movements and gait analysis, safety footwear, anti-skid footwear, foot-wear for the elderly, army shoes, and energy-harvesting footwear, among others. These smart shoes enable real-time patient monitoring and provide appropriate suggestions for their care. Additionally, smart footwear can be classified based on the tools and techniques used in their production, as well as the sensors and Internet of Things (IoT) devices integrated into them. This paper reviews the various tools and techniques used in the creation of smart footwear for dif-ferent applications.

The continuous expansion of Large Language Models (LLMs) has significantly transformed the fields of artificial intelligence (AI) and natural language processing (NLP). This paper reviews the rapidly evolving domain of language models and introduces the concept of Extremely Large Language Models (XtremeLLMs), a new category defined for models exceeding one trillion parameters. These models are monumental in scale and engineered to enhance performance across a diverse range of language tasks. This study aims to establish a comprehensive framework that explores the significant opportunities and complex challenges presented by such extensive scaling and emphasises the implications for future advancements in the field.

Background: Three-dimensional gait analysis plays a crucial role in the rehabilitation assessment of post-stroke hemiplegic patients. However, the data generated from such analysis is often complex and difficult to interpret in clinical practice, requiring extensive time and complicated procedures. The Gait Deviation Index (GDI) serves as a simplified metric for quantifying the severity of pathological gait. Although isokinetic dynamometry is widely employed in muscle function assessment and rehabilitation, its application in gait analysis remains underexplored. Objective: This study aims to investigate the use of isokinetic muscle strength data obtained from the Biodex system, combined with machine learning techniques, to predict the GDI in hemiplegic patients. Methods: A cohort of 150 post-stroke hemiplegic patients was evaluated. The peak torque, peak torque/body weight, maximum work of repeated actions, coefficient of variation, average power, total work, acceleration time, deceleration time, range of motion, and average peak torque for both flexor and extensor muscles on the affected side were measured at three angular velocities (60°/s, 90°/s, and 120°/s) using the Biodex System 4 Pro. GDI was calculated using data from a Vicon three-dimensional motion capture system. The study employed four machine learning models—Lasso regression, random forest (RF), support vector regression (SVR), and BP neural networks—to model and validate the data. Model performance was evaluated using mean squared error (MSE), the coefficient of determination (R²), and mean absolute error (MAE). SHapley Additive exPlanations (SHAP) analysis was used to enhance model interpretability. Results: The RF model outperformed others in predicting GDI, with an MSE of 16.18, an R² of 0.89, and an MAE of 2.99. In contrast, the Lasso regression model yielded an MSE of 22.29, an R² of 0.85, and an MAE of 3.71. The SVR model had an MSE of 31.58, an R² of 0.82, and an MAE of 7.68, while the BP neural network exhibited the poorest performance with an MSE of 50.38, an R² of 0.79, and an MAE of 9.59. SHAP analysis identified the maximum work of repeated actions of the extensor muscles at 60°/s and 120°/s as the most critical features for predicting GDI, underscoring the importance of muscle strength metrics at varying speeds in rehabilitation assessments. Conclusion: This study highlights the potential of machine learning techniques in analyzing complex clinical data. The developed GDI prediction model, based on isokinetic dynamometry data, offers a novel, streamlined, and effective tool for assessing rehabilitation progress in post-stroke hemiplegic patients, with promising implications for broader clinical application.

Recurrent Neural Networks (RNNs) have significantly advanced the field of machine learning by enabling the effective processing of sequential data. This paper provides a comprehensive review of RNNs and their applications, highlighting advancements in architectures such as Long Short-Term Memory (LSTM) networks, Gated Recurrent Units (GRUs), Bidirectional LSTM (BiLSTM), and stacked LSTM. The study examines the application of RNNs in different domains, including natural language processing (NLP), speech recognition, financial time series forecasting, bioinformatics, autonomous vehicles, and anomaly detection. Additionally, the study discusses recent innovations, such as the integration of attention mechanisms and the development of hybrid models that combine RNNs with convolutional neural networks (CNNs) and transformer architectures. This review aims to provide machine learning researchers and practitioners with a comprehensive overview of the current state and future directions of RNN research.

The Covid19 pandemic and the current wars in some countries have put incredible pressures on the global economy. Challenges for the U.S. include not only economic factors, major disruptions and reorganizations of the supply chains, but also those of national security and global geopolitics. This unprecedented situation makes predicting economic crisis for the coming years crucial yet challenging. In this paper, we propose a method based on various machine-learning models to predict the probability of a recession for the US economy in the next year. We collect the U.S’ monthly macroeconomics indicators and recession data from January of 1983 to December of 2023 to predict the probability of an economic recession in 2024. The performance of the individual economics indicator for the coming year was predicted separately, and then all of the the predicted indicators were used to forecast a possible economic recession. Our results showed that the U.S. will face a high probability of being in a recession period in the last quarter of 2024.

Anxiety in older individuals is understudied despite its prevalence. Investigating its occurrence can be challenging, yet understanding the factors influencing its recurrence is important for improved management. This study aimed to model the recurrence of anxiety symptomatology in an older population within a five-month timeframe. Data included baseline socio-demographic and general health information for older adults aged 60 years or older with at least mild depressive symptoms. A Bayesian network model explored the relationship between baseline data and recurrent anxiety symptomatology. Model evaluation employed the Area Under the Receiver Operating Characteristic Curve (AUC). The Bayesian model was also compared to three machine learning models. The model achieved an AUC of 0.821 on the test data, using a threshold of 0.367. This result surpassed both the Logistic Regression and XGBoost models, but slightly behind SGDClassifier. Key factors associated with recurrence of anxiety symptomatology were: “Not being able to stop or control worrying”; “Becoming easily annoyed or irritable”; “Trouble relaxing”; and “depressive symptomatology severity”. The model demonstrated generalisation abilities and outperformed some machine learning models while being less complex and more explainable. These findings indicate a prioritised sequence of predictors to identify individuals most likely to experience recurrent anxiety symptomatology.

Groundwater is becoming increasingly important in the Pacific Northwest of the USA due to declining snowpack volumes and shifts in precipitation type and timing, all connected with climate change. The Upper Williamson Basin of the Klamath Watershed is a groundwater dominated watershed with massive fluctuations in year-to-year streamflow volumes over the past four decades, including the complete absence of any live flow for several years. The precise relationship between groundwater and streamflow in the basin has been difficult to assess due to a limited number of monitoring wells and significant gaps in the water level time history. To address this challenge, we use a novel imputation technique that leverages Earth observations and machine learning to impute gaps in water level records. We use these more complete datasets to compute a groundwater storage change time series for the basin. We show that groundwater storage is highly correlated to streamflow and that groundwater storage is correlated to rainfall with a three- to four-year delay that appears variable depending on groundwater storage volumes. The tools and relationships we present make it possible for water managers to estimate when streamflows will return to the basin and be more informed to support better management.

This paper presents a repository of image databases where the image features are augmented with embedded vector field (VF) features to enhance the machine learning (ML) and increase classification statistics. Six VFs are formulated and used for the purpose of embedding. Three of them generate real shaped singular points (SPs): springing, sinking and saddle. The other three VFs generate seven kinds of SPs which include the real shaped SPs and four complex shaped SPs: repealing and attracting (out and in) spirals; clockwise and counterclockwise orbits (center). Also, the paper describes the VF singularities, their shapes, and locations according to the image objects. Then, the present work defines the mappings between the SPs’ shapes if the VFs are separately embedded into the same image. Thus, the paper infers which VFs are most appropriate for embedding into a particular image database such that the augmented SPs shapes enhance the ML classification. Examples of images with different embedded VFs are shown, in the text, to support and validate the theoretical conclusions. The contributions of the paper are: a description of the SPs location in an image; the mappings between the SPs of the different VFs; the definition of an imprint of an image in a VF; the generation of databases’ imprints. The advantage of classifying an image database with embedded VFs is that the new database enhances ML and improves the classification statistics if compared to the classification of the original image database with the same ML classifier. Furthermore, images with embedded SPs create a useful augmentation to the original image databases.

The potential of generalized machine learning models developed for crop water estimation was examined in the current study. Extreme Gradient Boosting (XGBoost), Gradient Boosting Machine (GBM), and Random Forest (RF) are three ensembled machine learning models that were developed using all of the data from a single location from 1976 to 2017 and then immediately applied at eleven different locations without the need for any local calibration. For the test period of January 2018 to June 2020, the model's capacity to estimate the numerical values of crop water requirement (Pen-man-Monteith (PM) ETo values) was assessed. In comparison to the GBM and RF models, the XGBoost model outperformed them both marginally and significantly. The estimate's weighted standard error was smaller than 0.85 mm/day, and the model's effectiveness varied from 96% to 99% across various locations. The model's strong performance was indicated by the decreased noise-to-signal ratio. A real-time water management system at the regional level can be seamlessly linked with this type of model due to its accuracy in estimating crop water requirements and its capacity to generalize.

The accurate counting of passengers in public transport systems is crucial for optimizing operations, improving service quality, and planning infrastructure. It can also contribute to reducing the number of public transport lines where a high frequency of vehicles is not needed in certain periods during the year, but also by increasing the number of lines where the need is increased. This paper provides a comprehensive review of current methodologies and technologies used for passenger counting, with a focus on image processing and machine learning techniques and concepts. The paper explores various algorithms, including traditional computer vision methods and advanced deep learning approaches, highlighting their strengths and limitations. Additionally, the paper examines the integration of these technologies with other sensing modalities such as infrared sensors, Wi-Fi, and RFID. By analyzing recent advancements and case studies, this review aims to offer insights into the effectiveness, scalability, and practicality of different passenger counting solutions and offers a solution proposal. The paper also analyzed the current GDPR regulation that applies to the European Union and how it affects the use of systems like this. Future research directions and potential areas for technological innovation are also discussed to guide further developments in this field.

The focus was on developing machine learning models to predict the IC50 values of the compound OTX015 using gene expression levels of cancer cell lines. Through regression-based machine learning models, particularly the SVM model, trained on pre-laboratory data, consistent and generalizable performance with low error scores was achieved. These models underwent enhancement via hyperparameter optimization and were tested on validation data. The results indicate the utility of machine learning in drug discovery processes and personalized medicine, offering rapid and cost-effective predictions of IC50 values. However, for enhanced reliability, further model development, data gathering, and evaluation with diverse compounds are recommended. In conclusion, this research demonstrates the potential of machine learning approaches to optimize experimental processes, reduce costs, and contribute to personalized treatments in healthcare by accurately predicting compound responses.

With the continuous advancement of digital transformation, digital payments are playing an increasingly important role in the financial industry. This study aims to utilize machine learning models to predict and analyze digital payment behavior. Initially, the background and significance of digital payments in the financial sector are introduced. Subsequently, the current status and trends of traditional digital payment distribution are reviewed, alongside related work on digital payment behavior prediction. Methodologically, principles and applications of machine learning models such as logistic regression, decision trees, and random forests are elaborated, along with experimental design and data preprocessing methods. The experimental results and discussion section illustrates the performance of each model in digital payment prediction and explores their impact on credit decisions. This exploration equips financial institutions with more effective user behavior analysis and risk management tools, thereby fostering future development and application of digital payment technologies.

We developed a novel machine learning (ML) algorithm with the goal of producing transparent models (i.e. understandable-by-humans) while also flexibly accounting for nonlinearity and interactions. Our method is based on ranked sparsity, and allows for flexibility and user-control in varying the shade of the opacity of black-box machine learning methods. The main tenet of ranked sparsity is that an algorithm should be more skeptical of higher-order polynomials and interactions \textit{a~priori} compared to main effects, and hence the inclusion of these more complex terms should require a higher level of evidence. In this work, we put our new ranked sparsity algorithm (as implemented in the open-source R package, `sparseR`) to the test in a predictive model "bakeoff" (i.e. a benchmarking study of ML algorithms applied "out-of-the-box," that is, with no special tuning). Algorithms were trained on a diverse set of simulated and real-world data sets from the Penn Machine Learning Benchmarks database, addressing both regression and binary classification problems. We evaluate the extent to which our human-centered algorithm can attain predictive accuracy that rivals popular black-box approaches such as neural networks, random forests, and support vector machines, while also producing more interpretable models. Using out-of-bag error as a meta-outcome, we describe the properties of data sets in which human-centered approaches can perform as well as or better than black-box approaches. We find that interpretable approaches predicted optimally or within 5% of the optimal method in most real-world data sets. We provide a more in-depth comparison of the performances of random forests to interpretable methods for several case studies, including exemplars in which algorithms performed similarly, and several cases when interpretable methods underperformed. This work provides a strong rationale for including human-centered transparent algorithms such as ours in predictive modeling applications.

The following article analyses the relationship between the mental health index and the variables of the Environment, Social and Governance-ESG model in the Italian regions between 2004 and 2023. First of all, a static analysis is proposed aimed at identifying trends relating to mental health in the Italian regions with indication of the regional gaps. Subsequently, a clustering with k-Means algorithm is proposed. Below is a comparison of 11 machine learning algorithms for predicting the performance of the mental health index. Finally, the article offers some economic policy suggestions. The results are critically discussed in light of the scientific literature.

The growing interest in fair AI development is evident. The ''Leave No One Behind'' initiative urges us to address multiple and intersecting forms of inequality in accessing services, resources, and opportunities, emphasising the significance of fairness in AI. This is particularly relevant as an increasing number of AI tools are applied to decision-making processes, such as resource allocation and service scheme development, across various sectors such as health, energy, and housing. Therefore, exploring joint inequalities in these sectors is significant and valuable for thoroughly understanding overall inequality and unfairness. This research introduces an innovative approach to quantify cross-sectoral intersecting discrepancies among user-defined groups using latent class analysis. These discrepancies can be used to approximate inequality and provide valuable insights to fairness issues. We validate our approach using both proprietary and public datasets, including EVENS and Census 2021 (England \& Wales) datasets, to examine cross-sectoral intersecting discrepancies among different ethnic groups. We also verify the reliability of the quantified discrepancy by conducting a correlation analysis with a government public metric. Our findings reveal significant discrepancies between minority ethnic groups, highlighting the need for targeted interventions in real-world AI applications. Additionally, we demonstrate how the proposed approach can be used to provide insights into the fairness of machine learning.

Recent advancements in cognitive neuroscience, particularly in Electroencephalogram (EEG) signal processing, image generation, and brain-computer interfaces (BCI), have opened up new avenues for research. This study introduces a novel framework, Bridging Artificial Intelligence and Neurological Signals (BRAINS), which leverages the power of AI to extract meaningful information from EEG signals and generate images. The BRAINS framework addresses the limitations of traditional EEG analysis techniques, which struggle with nonstationary signals, spectral estimation, and noise sensitivity. Instead, BRAINS employs Long Short-Term Memory (LSTM) networks and contrastive learning, which effectively handle time-series EEG data and recognize intrinsic connections and patterns. The study utilizes the MNIST dataset of handwritten digits as stimuli in EEG experiments, allowing for diverse yet controlled stimuli. The data collected is then processed through an LSTM-based network employing contrastive learning and extracting complex features from EEG data. These features are fed into an image generator model, producing images as close to the original stimuli as possible. This study demonstrates the potential of integrating AI and EEG technology, offering promising implications for the future of brain-computer interfaces.

The need for solvating and encapsulating hydro-sensitive molecules drives noticeable trends in the applications of cyclodextrins in pharmaceutical industry, food, polymer, materials, and agricultural science. Among them, β-cyclodextrin is one of the most used for the entrapment of phenolic acid compounds to mask the bitterness of wheat bran. In this regard, there is still a need for a good predictive model that assesses β-cyclodextrin bitterness masking capabilities for various phenolic compounds. This study uses a dataset of 20 phenolic acids docked to the β-cyclodextrin cavity to generate three different binding constants. The data from docking study were combined with topological, topographical and quantum-chemical features from the ligands in a machine learning-based structure-activity relationship study. Three different models for each binding constant were computed using a combination of Genetic Algorithm (GA) and Multiple Linear Regression (MLR) approaches. The developed ML/QSAR models showed a very good performance, with high predictive ability and correlation coefficients of 0.969 and 0.984, for training and test sets, respectively. The models revealed several factors responsible for a binding with cyclodextrin, showing positive contributions toward the binding affinity values, including such features as presence of six-membered rings in the molecule, branching, electronegativity values, and polar surface area.

In the intersection of the Internet of Things (IoT) and Machine Learning (ML), the choice between high-level and low-level programming libraries presents a significant dilemma for developers, impacting not only the efficiency and effectiveness of ML models but also their environmental footprint. We have proposed a comprehensive framework to aid in this decision-making process, underpinned by a detailed comparative analysis of both types of libraries on one of the key IoT ML task; image classification. We have introduced a novel algorithm designed to calculate the green footprint of ML model training, factoring in execution time, memory utilization, power consumption, and CPU temperature, addressing the urgent need for sustainable ML practices. Through an empirical evaluation of popular libraries such as PyTorch for high-level and Libtorch for low-level development, we have assessed their performance, development efficiency, and hardware compatibility. The culmination of our research is a decision support system that synthesizes the experimental findings to guide developers toward choices that harmonize model performance with environmental sustainability.

This paper presents the formative assessment to implement mobile portable chest X-ray (PDX) machines for Tuberculosis (TB) contact tracing in Oyo and Osun States, Nigeria. This descriptive qualitative study was carried out in 8 Local Government Areas, and 24 FGDs and 33 KIIs were conducted using a 4-stage sampling technique to select participants. Validated transcribed notes were entered and analysed using Nvivo. The respondents' ages ranged from 17-85 years, with a mean age of 42.08±14.9 years, and 4.0% had a postgraduate degree. The majority of the government officials stated that deploying the PDX machine intervention at the community level is the best means as it offers a level of convenience to the community members in the sense that there will be limited disruption to their daily activities as well as zero concerns about the cost of transportation to the health facility. The portable X-ray machine intervention should be implemented at the community level for contact tracing to allow more TB contacts living with the index patient to be screened. However, the PDX machine can also be set up in a special location, and the TB contacts can be invited for the screening.

Drowsiness is a main factor for various costly defects, even fatal accidents in areas such as construction, transportation, industry and medicine, due to the lack of monitoring vigilance in the mentioned areas. The implementation of a drowsiness detection system can greatly help to reduce the defects and accident rates by alerting individuals when they enter a drowsy state. This research proposes an Electroencephalography (EEG) based approach for detecting drowsiness. EEG signals are passed through a preprocessing chain composed of artifact removal and segmentation to ensure accurate detection followed by different feature extraction methods to extract the different features related to drowsiness. This work explores the use of various machine learning algorithms such as Support Vector Machine (SVM) the K Nearest Neighbor (KNN) the Naive Bayes (NB) the Decision Tree (DT) and the Multilayer Perceptron (MLP) to analyze EEG signals sourced from the DROZY database, carefully labeled into two distinct states of alertness (awake, and drowsy). Segmentation into 10-second intervals ensures precise detection, while a relevant feature selection layer enhances accuracy and generalizability. The proposed approach achieves high accuracy rates of 99.84% and 96.4% for intra (subject by subject) and inter (cross-subject) modes, respectively. SVM emerges as the most effective model for drowsiness detection in the intra mode, while MLP demonstrates superior accuracy in the inter mode. This research offers a promising avenue for implementing proactive drowsiness detection systems to enhance occupational safety across various industries.

Accurate forecasting of crop yields holds paramount importance in guiding decision-making processes related to breeding efforts. This study focused on the application of multi-sensor data fusion and machine learning algorithms based on unmanned aerial vehicles (UAVs) in wheat yield prediction. Five machine learning (ML) algorithms namely random forest (RF), partial least squares (PLS), ridge regression (RR), K-Nearest Neighbor (KNN) and eXtreme Gradient Boosting Decision Tree (XGboost) were utilized for multi-sensor data fusion, and three ensemble methods including the second-level ensemble methods (stacking and feature-weighted) and the third-level ensemble method (simple average) for wheat yield prediction. The 270 wheat hybrids were used as planting materials under full and limited irrigation treatments. A cost-effective multi-sensor UAV platform, equipped with red–green–blue (RGB), multispectral (MS), and thermal infrared (TIR) sensors, was utilized to gather remote sensing data. The results revealed that the XGboost algorithm exhibited outstanding performance in multi-sensor data fusion, with the RGB+MS+Texture+TIR combination demonstrating the highest fusion performance (R2=0.660, RMSE= 0.754). Compared with the single ML model, the employment of three ensemble methods significantly enhanced the prediction accuracy of wheat yield. Notably, the third-layer simple average ensemble method demonstrated superior performance (R2 = 0.733, RMSE= 0.668 t ha-1). It significantly outperformed both the second-layer ensemble methods of Stacking (R2= 0.668, RMSE= 0.673 t ha-1) and feature-weighted (R2= 0.667, RMSE= 0.674 t ha-1), thereby exhibiting superior predictive capabilities. This finding demonstrated that the third-layer ensemble method not only augments the predictive ability of the model but also fine-tuned the accuracy of wheat yield prediction through the employment of simple average ensemble learning. Consequently, it offers a novel perspective for crop yield prediction and breeding selection.

Cardiovascular disease (CVD) and obesity are prevalent public health concerns with grave implications for morbidity and mortality, necessitating tailored interventions. This research explores the utility of fuzzy c-means clustering paired with principal component analysis (PCA) in detecting at-risk groups and personalizing health strategies for these conditions. Fuzzy c-means clustering allows for the dynamic classification of individuals into groups based on unique risk factors and intervention outcomes, while PCA aids in distilling complex data sets to uncover underlying patterns. The conjoined use of these methods has shown promise in identifying diverse risk profiles and in forecasting intervention success rates. The study acknowledges limitations, including possible biases stemming from data set composition and analytical parameter selection. Future research aims to refine these tools for clinical application. The results support implementing fuzzy c-means clustering and PCA for delineating specific target populations for health interventions, emphasizing careful use of these analytical approaches. Subsequent studies should focus on correlating these techniques with concrete clinical results to enhance public health measures.

The review aims to assess fifteen (15) academic literature sources, highlighting the application of machine learning algorithms in the maintenance operations of optical fiber networks. It exhibits the collection of data using PRISMA methodology—Preferred Reporting Item for Systems Review and Meta-Analyses. The application, results, and performance metrics are discussed based on the collected observations, computations, and statistics in the studies, which revealed records of high accuracy degrees ranging from 86% to 98% on average and quality ML models including Neural Networks (NNs), Support Vector Machines (SVMs), and LSTM, as well as deep learning models that disclosed effective results of determining challenges and problems within the optical fiber lines. The review mainly centralized on superior machine learning technologies that surpass traditional techniques in fault detection and localization for improved optical fiber networks’ operations while providing insights into the limitations and challenges encountered in real-world applications of these models, offering a comprehensive perspective on the optical fiber network’s domain.

Feature selection is predominantly used in machine learning tasks, such as classification and regression. It selects a subset of features (relevant attributes of data points) from a larger set that contributes as optimally as possible to the informativeness of the model. There are exponentially many subsets of a given set, and thus, the exhaustive search is only practical for problems with at most a few dozen features. In the past, there have been attempts to reduce the search space using dynamic programming. However, models that consider similarity in pairs of features besides the quality of individual features do not provide the required optimal substructure. As a result, algorithms, which we will call suboptimal dynamic programming algorithms, find a solution that may deviate significantly from the optimal one. In this paper, we propose a dynamic programming algorithm with an iterative upgrade where the order of feature processing is inverted in each iteration. Such an alternating approach allows for improving the optimization function by using the score from the previous iteration to estimate the contribution of unprocessed features. The iterative process is proven to converge and terminate when the solution does not change in three successive iterations or when the number of iterations reaches the threshold. Results in more than 90 % of tests align with those of the exhaustive search, being competitive and often superior to the reference greedy approach. The validation was done by comparing the scores of output feature subsets and examining the accuracy of different classifiers learned on these features. In the context of feature selection, the proposed algorithm can be characterized as a filter method. However, we expect that the idea of alternating suboptimal optimization will soon be generalized to tasks beyond feature selection.

In this report, we present a study demonstrating how machine learning methods can reveal the interaction of different risk factors of post-transplant leukemic relapse and obtain robust predictions even with a modest clinical dataset. Using a cohort of 63 pediatric patients with acute lymphocytic leukemia (ALL) and 46 patients with acute myeloid leukemia (AML) who underwent stem cell transplant at a single institution, we built predictive models of leukemic relapse with both pretransplant and posttransplant patient variables (specifically lineage-specific chimerism) using the random forest classifier. The random forest classifier revealed different important predictive factors between ALL and AML in our relapse models consistent with previous knowledge. Furthermore, it also distinguished donor CD34 chimerism as most impactful in relapse prediction compare to donor chimerism of other cellular lineages in our dataset for ALL but CD3 for AML. Our models greatly improved sensitivity and specificity at predicting relapses in cross validation compared to a reference model based on our own institutional incidence of relapse and inferential statistical principles. Local Interpretable Model-Agnostic Explanations, an interpretable machine learning tool, confirmed our Random Forest Classification result and provided an intuitive explanation of how our machine learning models made the relapse prediction for each individual patient.

To address the problems of insufficient semantic fusion between text and questions and the lack of consideration of global semantic information encountered in machine reading comprehension models, we proposed a machine reading comprehension model called BERT_hybrid based on BERT and hybrid attention mechanism. In this model, BERT is utilized to separately map the text and questions into the feature space. Through the integration of Bi-LSTM, attention mechanism, and self-attention mechanism, the proposed model achieves comprehensive semantic fusion between text and questions. The probabilities distribution of answers is computed using Softmax. Experimental results on the public dataset DuReader demonstrate that the proposed model achieves improvements in BLEU-4 and ROUGE-L scores compared to existing models. Furthermore, to validate the effectiveness of the proposed model design, we analyze the factors influencing the model’s performance.

The human voice has the potential to serve as a valuable biomarker for the early detection, diagnosis, and monitoring of pediatric conditions. This scoping review synthesizes the current knowledge on the application of Artificial Intelligence (AI) in analyzing pediatric voice as a biomarker for health. The included studies featured voice recordings from pediatric populations aged 0-17 years, utilized feature extraction methods, and analyzed pathological biomarkers using AI models. Data from 62 studies were extracted, encompassing study and participant characteristics, recording sources, feature extraction methods, and AI models. The review showed a global representation of pediatric voice studies, with a focus on developmental, respiratory, speech, and language conditions. The most frequently studied conditions were Autism Spectrum Disorder, intellectual disabilities, asphyxia, and asthma. Mel-Frequency Cepstral Coefficients were the most utilized feature extraction method, while Support Vector Machines were the predominant AI model. The analysis of pediatric voice using AI demonstrates promise as a non-invasive, cost-effective biomarker for a broad spectrum of pediatric conditions. However, further research and development are crucial to enhance the accuracy and applicability of these tools in clinical settings.