Understanding and preventing the “great obstetrical syndromes” has been the focus of pregnancy research for decades. The combined global impact from these syndromes on maternal and perinatal morbidity and mortality is compounded by increased long-term risk of adverse health effects following pregnancy. Accumulating evidence indicates that conditions such as pre-eclampsia, fetal growth restriction, spontaneous preterm labour, and stillbirth, are syndromes with etiologic heterogeneity that share common pathophysiologic pathways involving placental dysfunction. Recently, the importance of the interaction between fetal and maternal genomes has been extended to include the epigenetic impact of pre-existing maternal pathophysiology on placental development and highlights the importance of nutritional and environmental factors in altered placentation. Validated first-trimester screening algorithms for preeclampsia can identify high-risk women and prophylactic treatment with low-dose aspirin can be initiated. High-risk women can be monitored during the second trimester using clinical assessment, ultrasound, and biochemical markers, that are able to predict complications prior to the development of clinical signs and symptoms. The integration of lifestyle interventions, pregnancy screening, and medical management represents a conceptual advance in pregnancy care. This approach has the potential to significantly reduce pregnancy complications, maternal and perinatal morbidity and mortality, adverse health outcomes later in life, and health-care costs.

(1) Background: Tooth extraction is one of the oldest and most well-known surgical procedures in dental medicine. It is still routinely performed to date by both general practitioners, oral surgeons, and dental undergraduates. The Benex extraction system allows for the extraction of teeth in vertical direction, which avoids most trauma against the surrounding alveolar bone and soft tissues; (2) Methods: The study included 56 patients who were recruited from the department of Oral Surgery at the Faculty of Dental Medicine, Medical University – Plovdiv. Patients were divided into two groups of 28 patients – Group I (control group) and Group II (study group). For each group the success of the extraction, buccal cortical plate preservation, pain experience and early wound healing were assessed; (3) Results: There was no statistical significance between the success of the extractions in both groups. The Benex extractions preserved the buccal cortical plate in 95% of the cases, whereas the forceps extractions only in 71.8%, which shows a statistical significance. On the seventh day patients in group II reported less pain, without a significant difference. There was a significantly bigger number of completely healed extraction wounds on the 10th day; (4) Conclusions: Atraumatic extractions allow for more hard and soft tissues to be preserved in the extraction site. This is all crucial for the successful outcome and aesthetically pleasing results of a following prosthetic or implant restoration.

Video capsule endoscopy (VCE) is increasingly used to decrease the discomfort among patients owing to its small size. However, VCE has a major drawback of not having narrow band imaging (NBI) functionality. The current VCE has the traditional white light imaging (WLI) only, which has poor performance in the computer-aided detection (CAD) of different types of cancer compared with NBI. Specific cancers, such as esophageal cancer (EC), do not exhibit any early biomarkers, making their early detection difficult. In most cases, the symptoms are unnoticeable, and EC is diagnosed only in later stages, making its 5-year survival rate below 20% on an average. NBI filters provide particular wavelengths that increase the contrast and enhance certain features of the mucosa, thereby enabling early identification of EC. However, VCE does not have a slot for NBI functionality because its size cannot be increased. Hence, NBI image conversion from WLI can be achieved only in post-processing at present. In this study, a complete arithmetic assessment of the decorrelated color space was conducted to generate NBI images from WLI images for VCE of the esophagus. Three parameters, namely, structural similarity index metric (SSIM), entropy, and peak-signal-to-noise ratio (PSNR), were used to asses the simulated NBI images. Results show the good performance of the NBI image reproduction method, with SSIM, entropy difference, and PSNR values of 93.215%, 4.360, and 28.064 dB, respectively.

For centuries, humans have relied on natural products to prevent and treat numerous health issues. However, biologically active compounds from natural sources, such as polyphenols, face significant challenges, including low solubility, rapid metabolism, and instability, which hinder their effectiveness. Advances in science and nanotechnology have provided solutions to overcoming these problems through the use of porous silica materials. These materials possess unique properties, such as a high specific surface area, adjustable particle and pore sizes, and a surface that can be easily and selectively modified. In this review, we summarize and discuss findings on how the pore and particle size, structure, and surface modification of silica materials influence the preparation of efficient delivery systems for biologically active polyphenols from natural sources. The available data demonstrate how parameters such as adsorption capacity, release and antioxidant properties, bioavailability, solubility, stability, etc. of the studied delivery systems could be affected by the structural and chemical characteristics of the porous silica carriers.

Rice blast and brown planthopper (BPH) are two of the most destructive diseases and pests in rice (Oryza sativa L.) production in China. The development of multi-resistant varieties is widely recognized as the most efficient and environmentally friendly approach to controlling crop diseases and pests. Functional molecular markers (FMMs) have been developed from functional variants in the genic region associated with trait variation, greatly enhancing the efficiency of identifying and pyramiding valuable genes in crop breeding. In this study, two FMMs and a multiplex PCR amplification system were developed for two major broad-spectrum BPH resistance genes, Bph6 and Bph9. By assistance of FMMs in multi-resistant rice restorer line development pipeline, two lines (Huahui7713 and Huahui3006) with blast and BPH resistance were developed by pyramiding three resistance genes Pigm, Bph6 and Bph9. Huahui7713 and Huahui3006 as male lines, two new hybrid rice varieties (WeiLiangYou7713 and Xuanliangyou3006) were certificated and commercial released in China. WeiLiangYou7713 and Xuanliangyou3006 showed improved blast and BPH resistance, and no penalty on yield and grain-quality. Annual promotion area of WeiLiangYou7713 has exceeded 53.3 thousand hectares, indicating its widespread adoption and success in the market. Huahui7713 and Huahui3006 could have great potential for utilization in blast and BPH resistance rice breeding.

The optimal surgical approach for thymoma resection is still an object of debate. The increasing experience in robotic-assisted thoracic surgery (RATS) has led to the progressive affirmation of this technique as a valid alternative to Video-Assisted Thoracic Surgery (VATS), sternotomy and thoracotomy in this setting. The present study aims to compare the post-operative and short-term results of RATS Thymectomy for thymoma with those of other main surgical approaches (sternotomy, thoracotomy, and VATS) from a high-volume single center.Between May 2021 - September 2023, 40 consecutive patients underwent RATS Thymectomy for I to limited-stage III thymoma in our center. Three homogenous groups of consecutive patients who received thymic surgery by main alternative approaches (sternotomy, thoracotomy, VATS) over the last 5 years, were identified in order to perform a comparative analysis. Data of operative technique, time of surgery, associated resections, conversion rate, overall morbidity, tumor size, radicality, postoperative pain, length of hospital stay, and cosmetic results were recorded and compared between each control group and the RATS group. Tumor size was higher in the sternotomy group, but not significantly. The mean operative time of RATS interventions was significantly lower than that of sternotomy and VATS. It was significantly shorter compared to thoracotomy if excluding docking-undocking time. Higher rate of associated adjacent structures resection was reported in the sternotomy group (p=0.005). Conversion rate was significantly higher in VATS group (p= 0.026) compared to RATS. Postoperative pain at 24 and 48 hours was significantly lower in RATS group compared to the others. Improved cosmetics results were reported after RATS compared to sternotomy (p= 0.0001) and thoracotomy (p= 0.001) groups, with a trend towards better results compared to VATS (p=0.05). Length of hospital stay was shorter in the RATS group with a significant difference vs. the sternotomy group (p<0.001). These results from a single center confirm the safety and effectiveness of RATS for the treatment of limited stage thymoma. Advantage in terms of operative outcomes, post-operative pain, cosmetic results, and hospital stay was observed if compared to the alternative approaches. Short-term oncologic outcome was excellent based on the high complete excision rate of the tumor.

Mango industry played important roles in the economy of tropical and subtropical regions in China. Embryo abortion, flesh rotten, pericarp stain and so on always result in heavy loss. Transgenic breeding is a potential way for solving these problems. However, dependable protocol for mango transgene has not been reported until now. In this research, we found that after mango embryogenic callus were infected by Agrobacterium, most callus necrotized and died. No seedling was differentiated from the survived callus. Contents of 106 compounds in mango callus infected by Agrobacterium were found significantly different from those in control. The top 7 up-regulated compounds were gallic acid, phosphoenolpyruvic acid, dihydrotricetin, ubiquinone, dihydrokaempferol, D-erythrose-4-phosphate and cyanidin. The expressions of ROS-related genes, gallic acid synthesis genes, and defense related genes in callus infected by Agrobacterium were significantly higher than those in control. The growth of Agrobacterium on culturing plate pipetting gallic acid was inhibited. Mango callus infected by Agrobacterium transformed with type III secretion system gene cluster (T3SS) and effector gene AvrPto isolated from Pseudomonas syringae pv. tomato strain DC3000 brown and necrotize slower than those infected by Agrobacterium transformed with net vector (NV). The contents of ROS in callus in-fected by Agrobacterium (T3SS-AvrPto) were less than those in callus infected by Agrobacterium (NV). The expressions of genes participated in immune responses in mango callus infected by Agrobacterium (T3SS-AvrPto) were also less than those in mango callus infected by Agrobacterium (NV). The transformation rate of mango callus infected with Agrobacterium (T3SS-AvrPto-gfp) was 1.6 %. No callus infected with Agrobacterium (NV-gfp) was transformed successfully. The efficiency of mango transformation can be improved by constructing Agrobacterium strains harboring type III secretion system gene cluster and its effector gene.

Beans are the most widely used protein source in the world and their productivity is directly linked to nitrogen (N). The short crop cycle imposes the need for fast methodologies for N quantification. In this work, we evaluated the performance of four machine learning algorithms in nitrogen prediction using NIR spectroscopy. Increasing doses of nitrogen were applied to the plants and leaf reflectance was collected. Weka software was used to test the algorithms. The selection of the most effective spectral zones was made with the VIP. Considering predictions with the whole NIR, the best results were achieved with RF (R2 = 0,84 and RMSE = 2,69 g kg-1) and KNN (R2 = 0,77 and RMSE = 3,86 g kg-1). The intervals of 700-740 nm and 983-995 nm were considered the most important for the study of N. More efficient predictions were verified when only spectral regions screened by VIP were included, increasing the accuracy of the RF, KNN and M5 models by 6%, 4% and 8%, respectively. The efficiency of N prediction based on NIR reflectance combined with machine learning was verified. This approach can optimize the management of nitrogen fertilization, serving as an important tool in precision agriculture.

Based on a constant volume combustion chamber, the initial ambient pressure effect on combustion performance and flame propagation of the active and passive pre-chamber ignition systems were studied. Compared with the passive pre-chamber, the active pre-chamber can significantly expand the lean combustion limit, enhance the ignition and combustion performance, and speed up the combustion of the main combustion chamber. At slightly lean combustion conditions, the heat release performance has a positive correlation with the initial ambient pressure. As the premixed λ increases, the heat release performance and the initial ambient pressure begin to become negatively correlated. Ignition delay can be minimized by controlling the excess air coefficient in the pre-chamber close to the stoichiometric ratio. The high ambient pressure in the constant volume chamber greatly reduces the mixture entrainment ability of the jet flame at lean combustion conditions, thereby reducing the combustion speed and peak heat release rate.

This study investigates the application of frequency augmentation techniques to improve condition-based maintenance (CBM+) systems for airborne weapon systems, focusing on the predictive accuracy of velocity and acceleration parameters. Utilizing MIL-STD-1553B MUX data from 138 sorties of fixed-wing aircraft, we explored six augmentation methods, including traditional interpolations (linear, quadratic, cubic spline) and advanced machine learning models (K-Nearest Neighbor, LSTM, and Bi-LSTM). Our findings indicate that while traditional methods like linear interpolation are more effective for velocity parameters, advanced ML techniques, particularly Bi-LSTM, provide better results for acceleration parameters, which exhibit more complex and rapid variability. The study underscores the necessity of tailoring augmentation approaches to specific parameter characteristics and highlights the potential of ML models in capturing intricate patterns within time-series data. These insights are critical for advancing CBM+ systems in military avionics, enhancing reliability and operational efficiency through improved data processing strategies. Future work should explore more performant augmentation techniques, such as by integrating multi-dimensional datasets, and explore ways to develop automated tools for a more powerful predictive maintenance framework.

Plants can utilize the different forms of nitrogen (N), including inorganic and organic N nutrients, and show the great difference in the utilizing efficiency of N-form among species and genotypes within a species. In our previous study, we found that Tibetan wild barley (XZ16) was better in utilization of organic nitrogen in comparison with cultivated barley (Hua30). In this study, metabolite profiles of the two barley genotypes were comprehensively compared in their response to four N forms, including nitrate (NO3-), ammonium (NH4+), urea and glycine. Macro-and micro-nutrient concentrations in shoots were mostly found higher in nitrate and urea treatments than in ammonium and glycine in both the genotypes. XZ16 had higher concentrations of nutrient ions in glycine treatment, but Hua30 accumulated more nutrients in ammonium treatment. Among the total 163 differentially expressed metabolites, highest up-regulation and highest down-regulation was found in XZ16 in glycine and urea treatments respectively. Some important metabolites such as proline, glutamine, serine, asparagine, L-homoserine, aspartic acid, putrescine, ornithine, 4-aminobutyrate were up-regulated in glycine treatment in both the genotypes with higher fold change in XZ16 than in Hua30. Similarly, fructose-6-PO4, aconitic acid and isocitrate were only up-regulated in XZ16 in glycine treatment. Here, we concluded that the genotype XZ16 exhibited higher response to glycine treatment, while Hua30 showed higher response to NH4+ treatment which is attributed to their better utilization of glycine-N and NH4+-N, respectively. .

The studied area (the Ionian Islands: Paxoi, Lefkas, Kefalonia and Zakynthos), is situated in the western ends of Ionian Basin (IB) in contact with the Apulian Platform (AP) and named as Apulian Platform Margins (APM). The proposed model is based on fieldwork, previously published data and balanced geologic cross-sections. Late Jurassic characterizes Ionian Basin to Early Eocene NNW–SSE extension followed by Middle Eocene to Middle Miocene compression (NNW–SSE directed). The space availability, the distance of Ionian Thrust from the Kefalonia strike-slip fault (KSSF) and the altitude between Apulian platform and Ionian basin that produced during extensional regime were the main factors for the produced structures due to inversion tectonic. In Zakynthos Island, the space availability (far from KFT), and the reactivation of normal bounding faults formed an open geometry anticline (Vrachionas anticline) and a foreland basin (Kalamaki thrust foreland basin). In Kefalonia Island, the space from FKT was limited and the tectonic inversion formed anticline geometries (Aenos Mountain), nappes (within the Aenos Mountain) and small foreland basins (Argostoli gulf), all within the margins (APM). In Lefkas Island, the lack of space, very close to KFT, lead to the movement of the Ionian basin over the margins, attempting to overthrust the Apulian platform. Because the obstacle between basin and platform was very large, the moving part of Ionian Basin strongly deformed producing nappes and anticlines in the external part of the Ionian basin, and a very narrow foreland basin (Ionian Thrust foreland basin).

Amyloid self-assembled from amyloid peptides βΑ40 or βΑ42 is notorious for its neurotoxic effects in plaque and neurofibrillary tangle formations leading to neuron dysfunction and diseases of cognitive decline (e.g. Alzheimer’s, Parkinson’s and Huntington's disease). This contrasts with so-called functional amyloids which are non-toxic ordered template structures amenable to applications in tissue engineering. Amyloid fibrils of variable morphology including long and hollow fibres and flattened tube and spiral ribbon-like structures have been used in engineering applications in nano-biology. Protein assemblies based on amyloid core structures display diverse biological functionalities could be applied in futuristic self-assembling biomaterials in nano-electronics. These possibilities have revolutionized the development of next generation computers and biosensors, ultracapacitors, memristors, actuators, molecular switches and could also be used to develop artificial synapses. Amyloid fibril assemblies have also been used in photoelectric and photon capture light harvesting technologies and been applied in innovative nano-photoelectronics and photovoltaics. Hybrid Aβ(16–22)-α-synuclein amyloid fibrils also exhibit light-harvesting and electron-transfer properties. Engineered amyloid assemblies are thus facilitating innovative futuristic advances in nano-technology. Furthermore, with a better understanding of amyloid fibril assembly processes it may be possible to develop therapeutic methods that prevent the toxic build up of this polymer in brain tissues that leads to diseases of cognitive decline. With the ever-expanding prevalence of these diseases in the ageing general global population, there certainly is a clear and present need to find a remedy for these debilitating conditions.

The application of space robotic manipulators and heightened autonomy for ios represents a paramount pursuit for leading space agencies, given the substantial threat posed by space debris to operational satellites and forthcoming space endeavors. This work presents a guidance algorithm based on drl to solve for the space manipulator path-planning during the motion synchronization phase with the mission target. The goal is the trajectory generation and control of a spacecraft equipped with a 7-dof robotic manipulator, such that its end effector remains stationary with respect to the target point of capture. The ppo drl algorithm is used to optimize the manipulator’s guidance law, and the autonomous agent generates the desired joints rates of the robotic arm, which are then integrated and passed to a model-based feedback linearization controller. The agent is first trained to optimize its guidance policy and then tested extensively to validate the results against a simulated environment representing the motion synchronization scenario of an ios mission.

Background: This study provides a comprehensive analysis of Acinetobacter baumannii in aquatic environments and fish microbiota by integrating culture-dependent methods, 16S metagenomics, and antibiotic resistance profiling. Methods: A total of 83 A. baumannii isolates were recovered using culture-dependent methods from intra-hospital infections (IHI), wastewater (WW) and surface water (SW) samples from two southern Romanian cities in august 2022. The antibiotic susceptibility was screened using disc diffusion, microdilution, PCR and Whole Genome Sequencing assays. Results: The highest microbial load in the analyzed samples was found in Glina, Bucharest for both WW and SW samples across all investigated phenotypes. For Bucharest isolates, the resistance levels corresponded to fluoroquinolones &gt; aminoglycosides &gt; β-lactam antibiotics. In contrast, A. baumannii from upstream SW samples in Targoviste showed the highest resistance to aminoglycosides. The blaOXA-23 gene was frequently detected in IHI, WW, and SW isolates in Bucharest but was absent in Targoviste. Molecular phylogeny revealed presence of ST10 in Târgoviște isolates and ST2 in Bucharest isolates, while other minor STs were not specifically correlated with a sampling point. Using 16S rRNA sequencing, significant differences in microbial populations between the two locations was identified. The low abundance of Alphaproteobacteria and Actinobacteria in both locations suggests environmental pressures or contamination events. Conclusions: These findings indicate significant fecal contamination and potential public health risks, emphasizing the need for improved water quality monitoring and management.

Foot pain related to the plantar fascia is common in adults regardless of athletic background. Many pathologies can lead to the diagnosis of plantar enthesopathy, but the most relevant to this case study is related to structural defects within the plantar fascia. Due to the variety and sometimes unclear etiology of plantar fasciosis, no single standard of care treatment protocol is recognized. Often, patients receive NSAIDs, night splints, taping, physical therapy, foot orthosis, and extracorporeal shock wave therapies. This study presents Wharton Jelly (WJ) tissue allografts as an additional intervention for patients who fail standard-care treatments. WJ allografts are applied to supplement connective tissue defects directly, unlike other therapies, which aim to reduce swelling and symptomatic pain. This retrospective study includes seven patients who have previously failed standard-of-care treatment. Each received extracorporeal pulse-activated therapy (EPAT), WJ, laser therapy, and an orthotic. Patient progress was tracked using a visual analog scale, 0-10 scoring, reported by the patient at the initial visit and approximately thirteen weeks following, reporting an average improvement of 50%. The study's limitations include a small cohort size and a non-blinded retrospective design. These promising results provide evidence for a more extensive, randomized study to define dosage protocols further and confirm safety and efficacy.

This study introduces a novel algorithm tailored for the precise detection of lower outliers in univariate datasets, particularly suited for scenarios with a single cluster. The approach leverages a combination of transformative techniques and advanced filtration methods to efficiently segregate anomalies from normal values. Notably, the algorithm emphasizes high precision, ensuring minimal false positives, and requires only a few parameters for configuration. Its unsupervised nature enables robust anomaly filtering without the need for extensive manual intervention. To validate its efficacy, the algorithm is rigorously tested using real-world data obtained from photovoltaic (PV) module strings with similar DC capacities, containing various anomalies. Results demonstrate the algorithm's capability to accurately identify lower outliers while maintaining computational efficiency and reliability in practical applications.

Quantum nonlocality represents correlation properties between subsystems of a composite quantum system, usually including the four types: Bell nonlocality, steerability, entanglement, and quantum correlation (quantum discord). Given a basis $e_{AB}=\{|e_{ij}\>\}_{i\in[d_A],j\in[d_B]}$ for the Hilbert space $\H_A\otimes \H_B$ of a bipartite system $AB$, a density operator $\rho^{AB}$ (quantum state) of $AB$ can be represented as a $d_Ad_B\times d_Ad_B$ matrix $\hat{\rho}_{e_{AB}}=[\]$, called the density matrix of a density operator $\rho^{AB}$. A natural question is what is the relationship between the quantum nonlocality of a density operator $\rho^{AB}$ and its corresponding density matrix $\hat{\rho}_{e_{AB}}$? In this work, we discuss the relationships between quantum locality and basis, and prove that one type of quantum locality of density operators and that of their density matrices under a basis are the same if and only if the chosen basis is the tensor product of the bases of subsystems. Consequently, different bases define different quantum nonlocality density operators.

The main objective of this investigation was to study the effect of organizational competencies development practices on turnover intentions and whether affective commitment explains this relationship. Another of the study's objectives was to test whether these relationships vary ac-cording to the generation to which the participant belongs. The study sample consisted of 2123 participants working in Portuguese organizations. The results indicate that organizational com-petencies development practices (training, individualized support, and functional rotation) nega-tively and significantly affect turnover intentions and that affective commitment mediates this re-lationship. However, these relationships vary according to the participant's generation. For Gen-eration Y and Generation X, this mediating effect is found in all dimensions of organizational competencies development practices. For the baby boomer generation, there is only a mediating effect of affective commitment in the relationship between individualized support and turnover intentions. These results indicate that human resources should consider the generation to which the participant belongs when implementing competencies development practices.

Sleep disorders have become a public health problem for many reasons. The aim of this systematic review is to describe social, economic, and environmental determinants of sleep disturbances in Australia and New Zealand. A total of 22 studies, 14 from Australia and 8 from New Zealand involving children, adolescents and adults are included in the review. In summary, we found that sleep health disparities among children and adolescents in both countries are strongly associated to parental SES. Overall, lower family SES such as low parental income, low parental education, low SES area index are associated with higher sleep disturbances among children and adolescents. In adults, results revealed that SES determinants such as low income, lower education, unemployment, and night work were associated with sleep disturbances. Specifically, unemployment was associated with poor sleep quality, insomnia, and increased likelihood of suboptimal sleep efficiency. Low income and lower education were associated with high risk of OSA, longer sleep duration, insomnia, higher odds of suboptimal sleep duration and sleep onset latency.

Every finite simple group P can be generated by two of its elements. Pairs of generators forP are available in the Atlas of finite group representations as (not necessarily minimal) permutation representations P . It is unusual but significant to recognize that a P is a Grothendieck’s dessin d’enfant D and that a wealth of standard graphs and finite geometries G - such as near polygons and their generalizations - are stabilized by a D. In our paper, tripods P − D − G of rank larger than two,corresponding to simple groups, are organized into classes, e.g. symplectic, unitary, sporadic, etc (as in the Atlas). An exhaustive search and characterization of non-trivial point-line configurationsdefined from small index representations of simple groups is performed, with the goal to recognize their quantum physical significance. All the defined geometries G's have a contextuality parameterclose to its maximal value 1.

Conditions under which compositions of component systems form a well-defined system-of-systems here are formulated at a fundamental level. Statement of what defines a well-defined composition and sufficient conditions guaranteeing such a result offers insight into exemplars that can be found in special cases such as differential equation and discrete event systems. For any given global state of a composition, two requirements can be stated informally as: 1) the system can leave this state, i.e., there is at least one trajectory defined that starts from the state, and 2) the trajectory evolves over time without getting stuck at a point in time. Considered for every global state, these conditions determine whether the resultant is a well-defined system and if so, whether it is non-deterministic or deterministic. We formulate these questions within the framework of iterative specifications for mathematical system models that are shown to be behaviorally equivalent to the Discrete Event System Specification (DEVS) formalism. This formalization supports definitions and proofs of the afore-mentioned conditions. Implications are drawn at the fundamental level of existence where the emergence of a system from an assemblage of components can be characterized. We focus on systems with feedback coupling where existence and uniqueness of solutions is problematic.

The objective was to compare the color match and color stability behavior of single and multishade resin-based composites (RBCs) used for direct restorations. This review was conducted according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. Randomized clinical trials evaluating the shade performance of single-shade RBCs in direct restorations were included. A search of the scientific literature was performed in 5 databases (April 2024). The meta-analysis was performed using RevMan 5.4, calculating the risk difference (RD) and 95% confidence interval (CI) of the dichotomous outcome using a random effects model. Bias was assessed using the RoB 2.0 tool, and certainty of evidence was assessed using the GRADE tool. Four studies with 263 restorations analyzed were selected. The results showed comparable performance between single-shade RBCs and multishade RBCs in terms of color match and color stability over 12 months. Three studies had a low risk of bias with all expected results, and one study had some concerns. The certainty of evidence for color stability was considered low for all follow-up periods due to the small number of events and sample size. According to the United States Public Health Service Evaluation (USPHS) and the World Dental Federation (FDI), there is comparable clinical color performance between single-shade and multishade RBCs over 12 months.

This work aims to investigate the effect of process temperature and catalyst content by thermochemical degradation of municipal solid waste (MSW) fraction (organic matter + paper + plastic) on the yield of reaction products (bio-oil, biochar, H2O and gas), physi-cochemical properties and chemical composition of bio-oils, as well as on the morphol-ogy and crystalline phases of biochar in laboratory scale. The organic matter, paper and plastic segregated from the gravimetric composition of total waste sample were subject-ed to the pre-treatments of drying, crushing and sieving. Thermal pyrolysis was per-formed at 400, 450 and 475 °C and 1.0 atmosphere, and catalytic pyrolysis at 450°C and 1.0 atmosphere, using 5.0, 10.0 and 15.0% (wt.) of FCC zeolite, bath mode, using a laboratory-scale borosilicate glass reactor. The bio-oil was characterized for acidic val-ue. The chemical functions present in the bio-oil identified by FT-IR and the composi-tion by GC-MS. Biochar was characterized by SEM/EDS and XRD. Thermal pyrolysis of the MSW fraction shows bio-oil yields between 9.44 and 9.24% (wt), aqueous phase yields between 21.93 and 18.78% (wt), solid phase yields between 67.97 and 40.34% (wt) and gas yields between 28.27 and 5.92% (wt). The bio-oil yield decreased with in-creasing process temperature. For the experiments using FCC, the biochar and gas yields slightly increased with increasing FCC content, while that of bio-oil decreased and the H2O phase remained constant. GC-MS of bio-oils identified the presence of hy-drocarbons and oxygenates, as well as nitrogen-containing compounds including am-ides and amines. The acidity of the bio-oil increased with increasing temperature and with the aid of FCC as a catalyst. The presence of hydrocarbons in bio-oil was identified by the addition of FCC catalyst due to the deoxygenation of carboxylic acids, followed by decarboxylation and decarbonylation reactions, producing aliphatic and aromatic hydrocarbons.

Oyster mushroom (Pleurotus ostreatus), nopal (Opuntia ficus-indica) and amaranth (Amaranthus spp.) are pre-hispanic foods widely consumed in Mexico. However, there are no standard products developed with these ingredients as functional cookies. This study evaluated the impact of partial replacement (50%) of whole-wheat flour (WWF) with three formulations of P. ostreatus, nopal and amaranth flours (POF, NF and AF, respectively) in the nutritional/antioxidant properties of fortified cookies. The proportion of flours´ ingredients (WWF:AF:NF:POF) were 100% WWF (traditional cookies), 50:35:10:5 (formulation 1), 50:30:15:5 (formulation 2) and 50:40:5:5 (formulation 3). Proximal composition, phenolic/flavonoid contents, and ABTS+ scavenging activity were determined in flours and cookies. POF, NF and AF possess a high nutritional value comprising polyphenols/flavonoids and a significant antioxidant potential. Total protein, ashes and flavonoids were higher in fortified cookies than controls. Cookies prepared with Formulation 2 -highest nopal level- contained 5.29% of dietary fiber and 5-times higher polyphenol content than control cookies. The ABTS+ scavenging ability was similar in the three enriched cookies (87.73-89.58%) but higher than traditional cookies (75.60%). Applicability of POF/NF/AF for replacing up to 50% of WWF in production of functional cookies was demonstrated. The research promotes renewable local bioresouces for a sustainable agri-food chain, especially edible mushrooms.

Transient conjugate heat transfer measurements under varying temperature and velocity inlet boundary conditions at incompressible flow conditions were performed for flat plate and ribbed channel geometries. Therefrom local adiabatic wall temperatures and heat transfer coefficients are determined. Those data are analyzed using typical heat transfer correlations, e.g. Nu=CRe^mPr^n determining the local distribution of C and m. It is shown that they are closely linked. A relationship lnC=A−mB is observed with A and B as modeling parameters. They could be related to parameters in log law or power law representations for turbulent boundary layer flows. The parameter m is shown to have a close link to local pressure gradients and therewith near wall streamlines as well as friction factor distributions. A normalization of the C parameter allows to derive a Reynolds analogy factor and therefrom local wall shear stresses.

Vaccination is an important method of immunological preventive care required for health management of all animal including fish. More particularly, immunization is important in in-land fisheries for the management of diseases in fish brood stocks and healthy seed production. According to the latest statistics in 2020, 90.3 million tonnes of captured fish production was achieved from the aquaculture sector. Out of the above, 78.8 million tonnes from marine and 11.5 million tonnes from inland waters aquaculture sectors. About 4% decline in fish production was achieved in 2020 than 2018 from inland fisheries sectors. On the other hand, the digestive protein content, healthy fats and nutritional values of fish products are comparitively more affordable as compared to other meat sources. In 2014, about 10% aquatic cultured animals were lost (costing &gt; 10 billion $ global annual loss) due to infectious diseases. Therefore, vaccination in fish especially in brood stocks is one of the most important approaches to stop such losses in the fisheries sector. Fish vaccines consist of either whole killed pathogens, subunit of a protein, a recombinant protein, DNA vaccines or live attenuated vaccines. Challenges existing are adaption of vaccination in fisheries sector, route of administration, use of effective adjuvants and most importantly lack of effective results. Use of autogenous vaccines, vaccination via intramuscular, intraperitoneal or oral routes, and most importantly adding vaccines in feed using top dressing methods or as a constituent in fish feed are now in emerging. These method shall lower the risk of using antibiotics in cultured water which in turn will reduce the environmental contamination.

Among the thermophysical properties, the surface / interfacial tension, viscosity and density / molar volume of liquid alloys are the key properties for the modelling of microstructural evolution during solidification. Therefore, only reliable input data can yield accurate predictions preventing the error propagation in numerical simulations of solidification related processes. Due to experimental difficulties related to reactivity of metallic melts at high temperatures, the measured data are often unreliable or even lacking. The application of containerless processing techniques either leads to a significant improvement of the accuracy or makes the measurement possible at all. On the other side, accurate model predicted property values could be used to compensate the missing data; otherwise, the experimental data are useful for the validation of theoretical models. The choice of models is particularly important for the surface, transport and structural properties of liquid alloys representing the two limiting cases of mixing, i.e. ordered and phase separating alloy systems. To this aim, the thermophysical properties of the Fe-Si and Cu-Pb systems were analysed and the connections with the peculiarities of their mixing behaviours are highlighted.

(1) Background: Alcohol abuse has a high impact on the mortality and morbidity related to a great number of diseases and is responsible for the development of alcoholic liver disease (ALD). It remains challenging to detect and evaluate its severity, which is crucial for prognosis. In this work, we studied if urinary EVs (uEVs) could serve in diagnose and evaluate cirrhosis in ALD. (2) Methods: uEVs characterization by cryo-electron microscopy (Cryo-EM), Nanoparticle Tracking Analysis (NTA) and Western blotting (WB) was performed in a cohort of 21 controls and 21 cirrhotic patients. Then, proteomics of urinary EVs (uEVs) was carried out in a second cohort of 6 controls and 8 patients in order to identify new putative biomarkers for cirrhosis in ALD. (3) Results: uEVs concentration, size and composition were altered in cirrhotic patients. A total of 1304 proteins were identified in uEVs, and 90 of them were found to be altered in cirrhotic patients. (4) Conclusions: uEVs could be considered as a tool and a supplier of new biomarkers for ALD, whose application would be especially relevant in chronic patients. Yet, further research is necessary to obtain more relevant result in clinical terms.

Supramolecular solvent (SUPRAS) has received increasing interest as an innovative, efficient, and green solvent for the effective extraction and separation of bioactive compounds from natural resources. However, studies on the use of SUPRAS for the extraction of phenolic components from plants, which are highly valued in food products due to their excellent antioxidant capacity, are still lacking. The present study developed a green ultrasound-assisted and efficient SU-PRAS method to simultaneously determine three phenolic acids in Prunella vulgaris by high-performance liquid chromatography (HPLC) and the experimental parameters were optimized in detail. The efficiency and antioxidant properties of the phenolic compounds obtained by different extraction methods were also compared. Under the optimal conditions, the extraction efficiency of SUPRAS, prepared with octanoic acid reverse micelles dispersed in ethanol-water, was substantially higher than conventional organic reagents. Moreover, this SUPRAS method also showed more significant antioxidant capacities. The confocal laser scanning microscopy (CLSM) images presented the spherical droplet structure of SUPRAS (A well-defined circle), which coincided with the position of the fluorescence position of phenolic acids. The phenolic acids were encapsulated in the vesicles by the SUPRAS droplets, which indicated the efficient extraction capacities of SUPRAS for the target compounds. Finally, combined with the CLSM method, the mechanism of the proposed method was further clarified, and the superior extraction performance of SUPRAS was theoretically demonstrated through molecular dynamics simulations. In comparison with conventional methods, the higher extraction efficiency of SUPRAS can be illustrated by the larger solvent contact surface area, more types of hydrogen bonds between extractants and supramolecular solvents, and stronger and more stable interaction forces. The results of the theoretical studies are in rational agreement with the experimental outcome.

Introduction: intraocular pressure (IOP) measurement is an essential part glaucoma’s diagnosis and follow-up. Goldmann applanation tonometry (GAT) is the gold standard for IOP measurement but it’s affected by many factors like central corneal thickness (CCT). Racial differences in CCT are reported but the Syrian population was never studied. Research design and methods: 57 subjects with 114 eyes visiting Damascus hospital were examined and 100 eyes were included. IOP was measured using GAT and CCT was measured using OCULUS Pentacam AXL Corneal Topography, demographic data and history of ocular surgery, systemic co-morbidities and history of medications were collected. IOP values were corrected for CCT. Results: 56% were males, the mean age was 48.1. 24% of subjects had hypertension. Males had higher CCT with 557.23± 25.33 compared with 531.34 ± 41.88 for females. There was a moderately positive correlation between CCT and IOP (r=0.232, p-0.02), CCT and IOP values were linearly correlated (ANOVA, p=0.02). Conclusions: This study showed that the correlation between CCT and IOP is present in the Syrian population. Males had a slightly thicker corneas than females and CCT didn’t significantly change with age.

This study propounds a sustainable alternative to petroleum-based polyurethane (PU) foams aiming to curtail this nonrenewable resource's continued and uncontrolled use. Coconut fatty acid distillate (CFAD) and crude glycerol (CG), both wastes from vegetable oil processes, were utilized for bio-based polyol production for rigid PU foam application. The raw materials were subjected to catalyzed glycerolysis with alkaline-alcohol neutralization and bleaching. The resulting polyol possessed properties suitable for rigid foam application with an average OH number of 215 mg KOH/g, acid number of 7.2983 mg KOH/g, and Gardner color value of 18. The polyol was used to prepare rigid PU foam, and its properties were determined using FTIR, TGA/DTA, and UTM. Additionally, the cell foam morphology was investigated by scanning electron microscope (SEM) in which most of its structure revealed an open-celled network and quantified at 92.71% open cell content using pycnometric testing. The PU foam thermal and mechanical analysis results showed an average compressive strength of 70.59 kPa, thermal conductivity of 46.50 mWm-1K-1, and density of 32.79 kgm-3. These properties showed its applicability as thermal insulating foam, thus, demonstrating the potential use of CFAD and CG in commercial polyol and PU foam production.

Literature indicates scarcity of cross-national research on the association between physical fighting and bullying victimisation among adolescents, and the moderating role of perceived social support and education spending on this association. Using multilevel binary logistic regression, this study examined the association of physical fighting with traditional bullying and cyberbullying victimisation, with public education spending and perceived social support from families and teachers as moderators. Country-level data were combined with 2017/18 Health Behaviour in School-aged Children (HBSC) survey data from 162,792 adolescents (11-, 13- and 15-year-olds) in 27 European countries. Results showed that physical fighting was positively and significantly associated with cyberbullying and traditional bullying victimisation. These results signify that physical fighting is a robust predictor of bullying victimisation. The findings demonstrate that perceived social support and education spending buffered the association of physical fighting with traditional bullying and cyberbullying victimisation. The findings imply that social support not only prevents adolescents from engaging in physical fights, but also reduces the risk of bullying victimisation. Accordingly, to deter adolescents from engaging in physical violence and reduce the risk of bullying victimisation, there is need to fully comprehend the influence of physical fighting on bullying victimisation, and the moderating role of social support.

Chronic conditions like type 2 diabetes mellitus (T2DM), arterial hypertension (HTN), and obesity are major global health issues, causing significant morbidity and mortality. In Latin America, these conditions contribute to millions of premature deaths annually, posing challenges exacerbated by limited healthcare access and poor primary care quality, particularly in Mexico. Complementary medicine presents a potential solution, offering minimally invasive techniques to improve physical, mental, and spiritual well-being. Effective treatment adherence, crucial for positive outcomes, is influenced by self-efficacy, the ability to manage one's behavior in response to medical conditions. However, treatment adherence rates remain low, indicating a pressing public health concern. This study aimed to explore how perception of complementary medicine and treatment adherence predict self-efficacy among individuals with chronic conditions in Mexico. Analyzing data from 113 participants revealed significant correlations between variables, with treatment adherence positively associated with self-efficacy and perception of holistic medicine negatively correlated with self-efficacy. Regression analysis showed that incorporating perception of complementary medicine and treatment adherence significantly explained self-efficacy levels, suggesting the potential of complementary therapies in holistic healthcare approaches. However, collinearity between variables highlights the need for further research to better understand these relationships and their implications for improving healthcare outcomes in Mexico. Integrating complementary therapies with conventional treatments could enhance overall well-being and treatment adherence, offering promising avenues for addressing chronic conditions in the region. These findings underscore the importance of comprehensive healthcare approaches that integrate both conventional and complementary modalities to optimize health outcomes and quality of life for individuals with chronic conditions in Mexico and beyond.

The integration of three-dimensional (3D) printed resin denture teeth represents a significant ad-vancement in digital dentistry. This study aimed to assess their ability to withstand chipping and indirect tensile fractures, comparing them with conventionally manufactured resin denture teeth. Four groups, each comprising 30 specimens, were examined: Group 1 featured 3D printed denture teeth (NextDent, 3D Systems, Soesterberg, The Netherlands), while the others included commer-cially obtained Ivostar Shade, SpofaDent Plus, and Major Super Lux teeth. Stereolithography 3D printing was utilized to produce methacrylate-based photopolymerized resin teeth models for Group 1, while the remaining groups were commercially sourced. Chipping and indirect tensile fracture tests were performed at a speed of 1 mm/min until fracture occurred. Statistical analysis was conducted using one-way analysis of variance (ANOVA) with Tukey's honestly significant difference multiple comparisons test (p < 0.05). Results indicated that 3D-printed teeth exhibited higher indirect tensile fracture resistance than Major Super Lux and Ivostar Shade but lower than SpofaDent Plus. Additionally, in the chipping test, buccal chipping occurred in 3D-printed resin teeth without distortion. In the indirect tensile test, the fracture line emerged near the loading point, extending cervically from the inner incline of both cusps. Overall, denture teeth produced via 3D printing with printable resin materials demonstrated sufficient fracture resistance, making them suitable for prosthetic applications.

The primary objective of this current study is to conduct a comprehensive review of existing literature that discusses research on post and core restorations, covering aspects such as their composition, manufacturing methods, and clinical effectiveness. The methodology employed in this review encompasses the implementation of a well-defined search strategy, the establishment of criteria for inclusion and exclusion, and the selection of relevant studies to summarize their findings. To gather relevant literature published between 1993 and 2023, the research team conducted separate searches on PubMed, Scopus, and Embase databases. In total, 165 titles were initially retrieved from these electronic databases. By applying the predefined exclusion criteria, the researchers identified 73 articles that specifically address the conventional and computer-aided design/computer-aided manufacturing (CAD/CAM) technologies employed in post and core restorations. These restorations are frequently utilized procedures for repairing teeth that have undergone endodontic treatment and subsequently lost dental structure. The development of computerized technology for the creation of customized posts and cores has emerged as a straightforward and efficient alternative to traditional methods. The review encompasses a synthesis of papers discussing the various techniques and materials employed in constructing post and cores using CAD/CAM technology. Notably, different strategies for restoring endodontically treated teeth through CAD/CAM post and cores have been documented, revealing both direct and indirect approaches. The most mentioned materials for these restorations include zirconia, composite resin, and hybrid ceramics. While the available literature on CAD/CAM post and core procedures is somewhat limited, the review underscores the need for further research to explore the long-term outcomes and efficacy of this treatment approach.

The rise of antibiotic-resistant strains demands new alternatives in antibacterial treatments. Bacteriophages, with their precise host specificity and ability to target and eliminate bacteria safely, present a valuable option. Meanwhile, hydrogels, known for their excellent biodegradability and biocompatibility, serve as ideal carriers for bacteriophages. The combination of bacteriophages and hydrogels ensures heightened phage activity, concentration, controlled release, and strong antibacterial properties, making it a promising avenue for antibacterial treatment. This article provides a comprehensive review of different cross-linking methods for phage hydrogels and focuses on their application in treating infections caused by various drug-resistant bacteria.

Pomegranate extract has potential benefits for women's reproductive health, including fertility enhancement, menstrual cycle regulation, pregnancy support, and polycystic ovary syndrome (PCOS) treatment. It possesses antioxidant properties, reducing oxidative stress and improving fertility. Phytoestrogens in pomegranate extract may help regulate hormonal imbalances and promote regular menstrual cycles. The extract's rich nutrient profile supports placental development and fetal growth and may reduce the risk of preterm birth. Additionally, pomegranate extract shows promise in improving insulin sensitivity and reducing inflammation and oxidative damage in PCOS. Some studies suggest its potential anticancer properties, particularly against breast cancer. However, further research, including human clinical trials, is necessary to establish its effectiveness and safety. The current evidence is limited and primarily based on in vitro studies, animal studies, and clinical trials. This review provides a comprehensive summary of the benefits of pomegranate extract for women's reproductive health and breast cancer, serving as a reference for future research.

Three patients with severe life-threatening COVID-19 who failed to achieve substantial improvement on tocilizumab, received pulse therapy with corticosteroids (methylprednisolone, 1000 mg/day IV for three consecutive days) and intravenous immunoglobulin (20 g/day IV). This was associated with a prompt resolution of respiratory failure, elimination of cytokine release syndrome, and reversal of pulmonary CT changes. The treatment was generally safe and well tolerated. There was no evidence of protracted persistence of the virus in the patients who received pulse therapy. Randomized controlled trials are necessary to specify the efficacy and safety of high-dose methylprednisolone and intravenous immunoglobulin in the treatment of severe life-threatening COVID-19 separately or in combination.

The world faces two seemingly unrelated challenges—a shortfall in the STEM workforce and increasing antibiotic resistance among bacterial pathogens. We address these two challenges with Tiny Earth, an undergraduate research course that excites students about science and creates a pipeline for antibiotic discovery.

One aspect of reproducibility in preclinical research that is frequently overlooked is the physical condition in which physiological, pharmacological, or behavioural recordings are conducted. In this study, the physical conditions of mice were altered through the attachments of wireless electrophysiological recording devices (Neural Activity Tracker-1, NAT-1). NAT-1 devices are miniaturised multichannel devices with on-board memory for direct high-resolution recording of brain activity for >48 hrs. Such devices may limit the mobility of animals and affect their behavioural performance due to the added weight (total weight of approximately 3.4 g). Mice were additionally treated with saline (control), N-methyl-D-aspartate (NMDA) receptor antagonist MK801 (0.85 mg/kg), or the muscarinic acetylcholine receptor blocker scopolamine (0.65 mg/kg) to allow exploration of the effect of NAT-1 attachments in pharmacologically treated mice. We found only minimal differences in behavioural outcomes with NAT-1 attachments in standard parameters of locomotor activity widely reported for the open field test between drug-treatments. Hypoactivity was globally observed as a consistent outcome in MK801-treated subjects and hyperactivity in scopolamine groups regardless of NAT-1 attachments. These data collectively confirm the reproducibility for combined behavioural, pharmacological and physiological endpoints even in the presence of lightweight wireless data loggers. The NAT-1 therefore constitutes a pertinent tool for investigating brain activity in e.g. drug discovery, models of neuropsychiatric and/or neurodegenerative diseases with minimal effects on pharmacological and behavioural outcomes.

A variational analysis of dispersion medium (electrolytes and surfactants) was carried out for the best nucleotide interactions with the presence of nanoparticles and the ability to formation of homogeneous coatings upon drying / lyophilization. Using UV-spectroscopy and transmission electron microscopy, the processes of immobilization of nucleotides on the surface of nanoparti-cles of the composition ZrO2-3mol% Y2O3 (YSZ) in the presence of various dispersing agents were investigated. Promising dispersing agents were established, the optimal composition of suspen-sions based on DNA nucleotides and YSZ nanoparticles, which is potentially suitable for adaptive technologies of bionanoelectronics, was selected. The aim of the work is to obtain and study functional media for molecular electronics based on heterojunctions biological molecule – wide-gap dielectric.

Parkinson’s disease (PD) is a common multisystem neurodegenerative disorder affecting 1% of the population above 60 years. The main neuropathological features of PD are the loss of dopaminergic neurons in the substantia nigra pars compacta (SNpc) and the presence of alpha synuclein (Syn)-rich Lewy bodies both manifesting with classical motor signs. Syn has emerged as a key protein in PD pathology as it can spread through synaptic networks to reach several anatomical regions of the body contributing to the appearance of non-motor symptoms (NMS) considerate prevalent among individuals before PD diagnosis and persisting throughout the patient’s life. NMS mainly include loss of taste and smell, constipation, psychiatric disorders, dementia, rapid eye movement (REM) sleep behavior impairment, urogenital dysfunction, and cardiovascular impairment. This review summarizes the more recent findings showing the impact of Syn deposits on several prodromal NMS and emphasizes the importance of early detection of Syn toxic species in biofluids and peripheral biopsies as prospective biomarkers in PD.

Sustainable development of our society demands recycling of metallic wastes which may contain a variety of metallic impurities. Thus, it is desirable to develop a ‘universal’ structure, such as an amorphous alloy tolerating high concentrations of metallic pollutants. We performed ab initio molecular dynamics simulations to manufacture a novel multicomponent amorphous alloy of twenty elements (20e-HEAA). Analysis reveals both topological and chemical compositional short-range ordering in the obtained 20e-HEAA and formation of B-B clusters. Electronic structure calculations reveal the metallic nature of the amorphous alloy with its Fermi level falling in a valley in the density of states. Moreover, the Zn 3d and Cd 4d electrons exhibit a localized nature and thus, should be excluded from the valence electron concentration (VEC) analysis in the study of high-entropy alloys. The information obtained here is helpful to get insight into multicomponent high entropy materials, especially multicomponent high-entropy amorphous alloys as potential circular metals.

In this paper, by extending some results of informational genomics, we present a new randomness test based on the empirical entropy of strings and some properties of repeatability and unrepeatability of substrings of certain lengths. We give the theoretical motivations of our method and some experimental results of its application to a wide class of strings: decimal representations of real numbers, roulette outcomes, logistic maps, linear congruential generators, quantum measurements, natural language texts, and genomes. It will be evident that the evaluation of randomness resulting from our tests does not distinguish among the different sources of randomness (natural, or pseudo-casual).

The objective of the paper is to introduce new similarity measure for single valued neutrosophic sets based on logarithm function. We define logarithm similarity measure and their weighted similarity measure for single valued neutrosophic sets. Then we define hybrid logarithm similarity measure and weighted hybrid logarithm similarity measure for single valued neutrosophic sets. We prove the basic properties of the proposed measures. We then define an entropy function using logarithm function to determine unknown attribute weights. We develop a novel multi attribute group decision making strategy for single valued neutrosophic sets based on the weighted hybrid logarithm similarity measure. We address an illustrative example to demonstrate the effectiveness and aptness of the proposed strategies. We conduct a sensitivity analysis of the developed strategy. We also make a comparison between the obtained results from proposed strategies and different existing strategies in the literature.

Neutrosophic cubic set (NCS) is one of the important family members of neutrosophic hybrid sets. Neutrosophic cubic set has more strength than other family members of neutrosophic hybrid sets to express incomplete information due to the presence of interval valued neutrosophic set (IVNS) and single valued neutrosophic set (SVNS) in its structure. Cross entropy measure is one of the best way to calculate the divergence of any variable from the priori one variable. In this paper we first define a new cross entropy measure under NCSs environment which we call NC- cross entropy measure. We investigate the basic properties of NC-cross entropy. We also propose weighted NC-cross entropy and investigate its basic properties. We develop a novel multi attribute decision making (MADM) strategy based on weighted NC-cross entropy. To show the feasibility and applicability, we solve a MADM problem using the proposed strategy.

Background: Although endoscopic submucosal dissection (ESD) can provide a high rate of curative resection, remaining gastric mucosa after ESD is at risk of metachronous recurrence. We investigated risk factors for metachronous superficial gastric epithelial neoplasms (MSGENs) following ESD. Methods: We conducted a retrospective cohort study including 369 patients with 382 lesions that underwent ESD for adenoma/early gastric cancer. The primary endpoint was to identify clinicopathological risk factors for the occurrence of MSGENs. The secondary endpoint was to evaluate the association of Helicobacter pylori (Hp) eradication with the MSGENs. Results: Twenty-seven MSGENs were occurred. The subjects were divided into MSGEN and not-MSGEN groups. There was a significantly higher frequency of histological intestinal metaplasia (HIM) and initial neoplasm location in upper or middle part (INUM) in the MSGEN group. The HIM group and INUM group had significantly higher cumulative incidence of MSGENs. We compared the 27 patients of MSGEN group and 27 patients of matched not-MSGEN (Mnot-MSGEN) group that was matched to the MSGEN group for variables including HIM and INUM. There was a significantly higher frequency of Hp spontaneous eradication in the MSGEN group. Conclusion: HIM, INUM and Hp spontaneous eradication may be clinicopathological risk factors for developing MSGENs after ESD.

In recent years, the advances in sperm morphology and genetic analyses in Perumytilus purpuratus allowed to suggest two evolutionary scenarios for this mussel: 1) the scenario of cryptic species and 2) the scenario of incipient or in progress speciation. To a better understanding of the evolutionary history of P. purpuratus, we performed an extensive sampling effort along a latitudinal gradient of ca. 7,180 km of coastline, from Southern Pacific to Atlantic Oceans and, we have also gone deeper in sperm morphology in P. purpuratus, exploring its association with phylogeny and population genetics to contrast if variability in sperm traits between northern and southern regions are signals of cryptic or incipient species. Overall, our results showed three sperm morphotypes and genetic structure in males of P. purpuratus strongly correlated. Additionally, we found evidence of a genetic admixture between lineages suggesting an introgressive hybridization zone at 38°S. These findings suggest the hypothesis that P. purpuratus is under incomplete reproductive isolation, with the presence of mechanisms of postzygotic isolation between lineages and, therefore, under an incipient or in fraganti speciation process. Finally, we discovered a new long morphotype for this species restricted to southern localities. Overall, our results support the hypothesis of historical events and postglacial recolonization as causal phenomena for the observed divergences.

Most striking observations in COVID-19 patients are the hints on pulmonary edema (also seen on CT scans as ground glass opacities), dry cough, fluid restrictions to prevent more severe hypoxia, the huge PEEP that is needed while lungs are compliant, and the fact that anti-inflammatory therapies are not powerful enough to counter the severity of the disease. We propose that the severity of the disease and many deaths are due to a local vascular problem due to activation of B1 receptors on endothelial cells in the lungs. SARS-CoV-2 enters the cell via ACE2, a cell membrane bound molecule with enzymatic activity that next to its role in RAS is needed to inactivate des-Arg⁹ bradykinin, the potent ligand of the bradykinin receptor type 1 (B1). In contrast to bradykinin receptor 2 (B2), the B1 receptor on endothelial cells is upregulated by proinflammatory cytokines. Without ACE2 acting as a guardian to inactivate the ligands of B1, the lung environment is prone for local vascular leakage leading to angioedema. Angioedema is likely a feature already early in disease, and might explain the typical CT scans and the feeling of people that they drown. In some patients, this is followed by a clinical worsening of disease around day 9 due to the formation antibodies directed against the spike (S)-antigen of the corona-virus that binds to ACE2 that could contribute to disease by enhancement of local immune cell influx and proinflammatory cytokines leading to damage. In parallel, inflammation induces more B1 expression, and possibly via antibody-dependent enhancement of viral infection leading to continued ACE2 dysfunction in the lung because of persistence of the virus. In this viewpoint we propose that a bradykinin-dependent local lung angioedema via B1 and B2 receptors is an important feature of COVID-19, resulting in a very high number of ICU admissions. We propose that blocking the B1 and B2 receptors might have an ameliorating effect on disease caused by COVID-19. This kinin-dependent pulmonary edema is resistant to corticosteroids or adrenaline and should be targeted as long as the virus is present. In addition, this pathway might indirectly be responsive to anti-inflammatory agents or neutralizing strategies for the anti-S-antibody induced effects, but by itself is likely to be insufficient to reverse all the pulmonary edema. Moreover, we provide a suggestion of how to ventilate in the ICU in the context of this hypothesis.

Heterotopic ossification (HO) is most dramatically manifested in the rare and severely debilitating disease, fibrodysplasia ossificans progressiva (FOP), in which heterotopic bone progressively accumulates in skeletal muscles and associated soft tissues. The great majority of FOP cases are caused by a single amino acid substitution in the type 1 bone morphogenetic protein (BMP) receptor ACVR1, a mutation that imparts responsiveness to activin A. Although it is well-established that biological sex is a critical variable in a range of physiological and disease processes, the impact of sex on HO in animal models of FOP has not been explored. We show that female FOP mice exhibit both significantly greater and more variable HO responses after muscle injury. Additionally, the incidence of spontaneous HO was significantly greater in female mice. This sex dimorphism is not dependent on gonadally-derived sex hormones, and reciprocal cell transplantations indicate that apparent differences in osteogenic activity are intrinsic to the sex of the transplanted cells. By circumventing the absolute requirement for activin A using an agonist of mutant ACVR1, we show that the female-specific response to muscle injury or BMP2 implantation is dependent on activin A. These data identify sex as a critical variable in basic and preclinical studies of FOP.

Fabrics comprised of porous fibers could provide effective passive protection against chemical and biological (CB) threats whilst maintaining high air permeability (breathability). Here, we fabricate hierarchically porous fibers consisting of regenerated silk fibroin (RSF) and activated-carbon (AC) prepared through two fiber spinning techniques in combination with ice-templating – namely cryogenic solution blow spinning (Cryo-SBS) and cryogenic wet-spinning (Cryo-WS). The Cryo-WS RSF fibers had exceptionally small macropores (as low as 0.1 µm) and high specific surface areas (SSAs) of up to 79 m2 g-1. The incorporation of AC could further increase the SSA to 210 m2 g-1 (25 wt. % loading) whilst also increasing adsorption capacity for volatile organic compounds (VOCs).

This retrospective study examines 248 test-bolus examinations preceding contrast-enhanced magnetic resonance angiography (CE-MRA) to extract clinically relevant data for critical limb ischemia (CLI) management. Methods involved a retrospective review of test-bolus exams, analysing 60 graphs for time-to-peak (TTP), full-width half-maximum (FWHM) time, and time to continual rise in signal intensity. These values were correlated with heart function parameters (ejection fraction, ASA-Classification, Lee-Index, and MET-Score). Results indicate a mean TTP of 31.2 ± 7.3s, showing a correlation between ejection fraction and ASA classification. Patients with atrial fibrillation exhibited prolonged TTP compared to those without. Despite population heterogeneity, findings facilitate risk stratification for limb-saving interventions in CLI. TTP emerges as a potential clinical cardiovascular parameter and a risk factor for vascular interventions. Given the variation in injection protocols across centres, this study underscores the importance of precise bolus arrival time documentation for future multicentre studies.

Nuclear receptors (NRs) constitute a superfamily of ligand-activated transcription factors with a paramount role in ubiquitous physiological functions such as metabolism, growth, and reproduction. Owing to their physiological role and druggability, NRs are deemed attractive and valid targets for medicinal chemists. Pentacyclic triterpenes (PTs) represent one of the most important phytochemical classes present in higher plants, where oleanolic acid (OA) is the most studied PTs representative owing to its multitude of biological activities against cancer, inflammation, diabetes, and liver injury. PTs possess a lipophilic skeleton that imitates the NRs endogenous ligands. Herein, we report a literature overview on the modulation of metabolic NRs by OA and its semi-synthetic derivatives, highlighting their health benefits and potential therapeutic applications. Indeed, OA exhibited varying pharmacological effects on FXR, PPAR, LXR, RXR, PXR, and ROR in a tissue-specific manner. Owing to those NRs modulation, OA exhibited prominent hepatoprotective properties comparable to ursodeoxycholic acid (UDCA) in a bile duct ligation mice model and antiatherosclerosis effect as simvastatin in a model of New Zealand white (NZW) rabbits. It also demonstrated a great promise in alleviating non-alcoholic steatohepatitis (NASH) and liver fibrosis, attenuated alpha-naphthol isothiocyanate (ANIT)-induced cholestatic liver injury, and controlled blood glucose levels, making it a key player in the therapy of metabolic diseases. We also compiled OA semi-synthetic derivatives and explored their synthetic pathways and pharmacological effects on NRs, showcasing their structure-activity relationship (SAR). To the best of our knowledge, this is the first review article to highlight OA activity in terms of NRs modulation.

Searching for bioactive compounds within the huge chemical space is like trying to find a needle in a haystack. Isatin is a unique natural compound which is endowed with different biopertinent activities specially in cancer therapy. Herein, we envisaged that adopting a hybrid strategy of isatin and α,β-unsaturated ketone would afford new chemical entities with strong chemotherapeutic potential. Of interest, compounds 5b and 5g demonstrated significant antiproliferative activities against different cancer genotypes according to NCI assay. Concomitantly, their IC50 against HL-60 cells were 0.38 ± 0.08 and 0.57 ± 0.05, respectively, demonstrating remarkable apoptosis and mod-erate cell cycle arrest at G1 phase. Intriguingly, an impressive safety profile for 5b was reflected by a 37.2 times selectivity against HL-60 over PBMC from a healthy donor. This provoked us to further explore their mechanism of action by in vitro and in silico tools. Conclusively, 5b and 5g stand out as strong chemotherapeutic agents that hold a clinical promise against acute myeloid leukemia.

Precipitation type is a key parameter used for better retrieval of precipitation characteristics as well as to understand the cloud-convection-precipitation coupling processes. Ice crystals and water droplets inherently exhibit different characteristics in different precipitation regimes (e.g., convection, stratiform), which reflect on satellite remote sensing measurements that help us distinguish them. The Global Precipitation Measurement (GPM) Core Observatory’s Microwave Imager (GMI) and Dual-Frequency Precipitation Radar (DPR) together provide ample information on global precipitation characteristics. As an active sensor, DPR provides an accurate precipitation type assignment, while passive sensors like GMI are traditionally only used for empirical understanding of precipitation regimes. Using collocated precipitation type flags from DPR as the “truth”, this paper employs machine learning (ML) models to train and test the predictability and accuracy of using passive GMI-only observations together with ancillary information from reanalysis and GMI surface emissivity retrieval products. Out of six ML models, four simple ones (Support Vector Machine, Neural Network, Random Forest, and Gradient Boosting) and the 1-D convolutional neural network (CNN) model are identified to produce 90% - 94% prediction accuracy globally for 5 types of precipitation (convective, stratiform, mixture, no precipitation, and other precipitation), which is much more robust than previous similar effort. One novelty of this work is to introduce data augmentation (subsampling and bootstrapping) to handle extremely unbalanced samples in each category. Careful evaluation of Impact matrices demonstrate that polarization difference (PD) and surface emissivity at high-frequency channels dominate the decision process, which are consistent with the physical understanding of polarized microwave radiative transfer over different surface types, as well as in snow and liquid clouds with different microphysical properties. Furthermore, the view-angle dependency artifact that DPR precipitation flag bears with does not propagate into the conical-viewing GMI retrievals. This work provides a new and promising way for future physics-based ML retrieval algorithm development.

Alfalfa, an important legume forage, is an ideal crop for sustainable agriculture and a potential bioenergy plant. Drought, one of the most common environmental stresses, substantially affects plants’ growth, development and productivity. MicroRNAs (miRNAs) are newly discovered gene expression regulators that have been linked to several plant stress responses. To elucidate the role of miRNAs in drought stress regulation of alfalfa, a high-throughput sequencing approach was used to analyze 12 small RNA libraries comprising of 4 samples, each with 3 biological replicates. We identified 348 known miRNAs, belonging to 80 miRNA families, from the 12 libraries and 281 novel miRNAs using Mireap software. 18 known miRNAs in roots and 12 known miRNAs in leaves were screened out as drought-responsive miRNAs. Except for miR319d and miR157a which were upregulated under drought stress, the expression pattern of drought-responsive miRNAs were different between roots and leaves in alfalfa. This is the first study discovering miR157a, miR1507, miR3512, miR3630, miR5213, miR5294, miR5368 and miR6173 are drought-responsive miRNAs. Target transcripts of drought-responsive miRNAs were computationally predicted. All 447 target genes for the known miRNAs were predicted using an online tool. This study provides a significant insight on understanding drought-responsive mechanisms of alfalfa.

Understanding and addressing dehumanization in healthcare is crucial due to its pro-found impact on patient care, ethical implications on patient dignity and autonomy, and its potential to affect the psychological well-being of healthcare professionals. The primary aim of this study was to establish reliable and valid instruments measuring two different types of dehumanization, namely animalistic dehumanization (i.e., stripping one of their uniquely human characteristics) and mechanistic dehumanization (i.e., stripping one of their human nature characteristics) among healthcare professionals. In a cross-sectional validation study among healthcare professionals, we tested measures of both animalistic and mechanistic dehumanization, focusing on dehumanization of patients (hetero-dehumanization) and oneself (self-dehumanization), respectively. All measures were developed and validated based on a concept analysis, a literature review, and an appraisal of pre-existing scales. The research was conducted among 400 nurses and medical doctors employed in Greek public hospitals. Coefficient Validity Ratio re-sults showed that 100% of items were acceptable for both measures. The newly estab-lished and validated hetero-dehumanization scale encompassed two-factors (factor 1: animalistic dehumanization, factor 2: mechanistic dehumanization, Cronbach’s alpha was equal to 0.86 for each measure). The self-dehumanization scale was a mono-factorial measure mechanistic dehumanization (Cronbach’s alpha = 0.97). Two validated measures of (self and hetero-) animalistic and mechanistic dehumanization measures were developed for the assessment of dehumanization among health profes-sionals, which will form the basis for future research in this important scientific field.

Tyrosine kinase fibroblast growth factor receptor (FGFR), which is aberrant in various cancer types, is a promising target for cancer therapy. Here we reported the design, synthesis, and biological evaluation of a new series of 6-(2,6-dichloro-3,5-dimethoxyphenyl)-4-substituted-1H-indazoles derivatives as potent FGFR inhibitors. Compound 10a was first identified as a potent FGFR1 inhibitor, with good enzymatic inhibition. Further structure-based optimization revealed that compound 13a is the most potent FGFR1 inhibitor in this series with the enzyme inhibitory activity about 30.2 nM of IC50 value.

Hydroalcoholic extracts from Malbec and Torrontés wine pomace (Vitis vinifera L.) originating from the high-altitude vineyards of Argentina's Calchaquí Valleys were characterized. Total phenolics, hydroxycinnamic acids, orthodiphenols, anthocyanins, non-flavonoid phenolics, total flavonoids, flavones/flavonols, flavanones/dihydroflavonols, and tannins were quanti-fied through spectrophotometric methods, with Malbec extract exhibiting higher concentra-tions in most of phytochemical groups when compared to Torrontés. HPLC-DAD identified more than 30 phenolic compounds in both extracts. Malbec displayed superior antiradical ac-tivity (ABTS cation, nitric oxide, and superoxide anion radicals), reduction power (iron, copper and phosphomolybdenum), hypochlorite scavenging, and iron chelating ability, compara-tively to Torrontés. The cytotoxicity assessments revealed that Torrontés affected the viability of HT29-MTX and Caco-2 colon cancer cells by 70% and 50%, respectively, at the highest tested concentration (1 mg/mL). At the same time, both extracts did not demonstrate acute toxicity in Artemia salina or in red blood cell assays at 500 µg/mL. Both extracts inhibited the lipoxygen-ase enzyme, with Malbec also reducing the tyrosinase activity and neither inhibited the xan-thine oxidase. The substantial phenolic content and diverse biological activities in Calchaquí Valleys' pomaces underline their potentialities to be valorized for pharmaceutical, cosmetic, and food industries.

Nitroxyl radical catalysts oxidize alcohols under an applied electric potential. It is possible to quantify the alcohol concentration from the resulting oxidation current. In this work, we evaluated the catalytic activity of nitroxyl radicals (or their corresponding hydroxylamines), including 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) as representative nitroxyl radicals, acetoamido-TEMPO, which shows higher oxidation potential than TEMPO owing to the acetoamido group, AZADO, Nor-AZADO, and NNO as less-hindered bicyclic nitroxyl radicals, and NHPI as an N,N-diacyl-type hydroxylamine, in acetonitrile solution. TEMPO, AZADO and NNO were also evaluated for their ability to oxidize alcohols in organic solvents, and their reactivity was compared with the electrochemical response. The most active NNO was used for electrochemical detection of cyclosporin A, a drug with a hydroxyl group.

Abstract: Non-alcoholic fatty liver disease (NAFLD) begins with lipid accumulation within hepatocytes, but the relative contributions of different macronutrients is still unclear. We inves-tigated the impact of fatty acids, glucose and fructose on lipid accumulation in primary human hepatocytes (PHH) and three different hepatoma cell lines: HepG2, Huh7 and McA-RH7777 (McA). Cells were treated for 48 hours with fatty acids (0 or 200μM), glucose (5mM or 11mM) and fructose (0mM, 2mM or 8mM). Lipid accumulation was measured via Nile Red staining. All cell types accumulated lipid in response to fatty acids (P<0.001). PHH and McA, but not HepG2 or Huh7 cells, accumulated more lipid with 11mM glucose plus fatty acids (P=0.004, fatty acid x glucose interaction, for both), but only PHH increased lipid accumulation in response to fructose (P<0.001). Considerable variation was observed between PHH cells from different individuals. Lipid accumulation in PHH was increased by insulin (P=0.003) with inter-individual variability. Similarly, insulin increased lipid accumulation in both HepG2 and McA cells, with a bigger response in McA in the presence of fatty acids (P<0.001 for fatty acid x insulin). McA were more insulin sensitive than either HepG2 or Huh7 cells in terms of AKT phosphorylation (P<0.001 insulin x cell type interaction). Hence glucose and fructose can contribute to the accumulation of lipid in PHH with considerable inter-individual variation, but hepatoma cell lines are not good models of PHH.

The study assessed the impact of different diets on gastrointestinal pH, intestinal microbiota, digestive tract morphometry, and productive performance in guinea pigs. A total of 160 improved genotype guinea pigs were used, distributed into three groups with different diets: alfalfa (T1), alfalfa + concentrate (T2), and concentrate (T3), to which a mixture of probiotics combined with vitamins, minerals was added and amino acids in T2 and T3. Gastrointestinal pH showed significant differences between treatments in the various segments of the digestive tract. The intestinal microbiota varied according to the diet, with Escherichia coli being the predominant bacterium in weaned guinea pigs. Intestinal morphometry was significantly altered with the addition of a reinforced probiotic mixture, improving the length and density of intestinal villi. Productive parameters such as weight gain, feed consumption, and feed conversion were better in guinea pigs fed a mixed diet with 0.5% probiotic mixture. These results indicate that intestinal pH may influence microbial composition, which impacts productive efficiency and immune health, highlighting the importance of balanced nutrition and supplementation to optimize the health and performance of guinea pigs.

Introduction: Signet-ring cells are typically associated with mucin-secreting epithelium thus most commonly found in a gastrointestinal tract, however not exclusively. Primary signet ring cell carcinoma of the prostate is a rare and poorly differentiated, aggressive acinar adenocarcinoma variant with a grim prognosis. Clinical case: In June of 2023 a 54-year-old Caucasian male came to the hospital complaining of lower urinary tract obstructive symptoms with occasional macrohematuria, non-specific body aches, and shortness of breath. A prostate specimen obtained in transurethral resection of the prostate was sent for histopathological examination. After a series of extraprostatic diagnostic workups including fibrogastroduodenoscopy, colonoscopy computed tomography imaging, and immunohistochemical studies, the patient was diagnosed with primary prostatic signet-ring cell adenocarcinoma st. IV. Unfortunately, the patient with the disease this advanced, PE, and third-degree thrombocytopenia was not a candidate for chemotherapy and died of cardiopulmonary insufficiency later that week. Discussion: Prostatic signet-ring cell carcinoma accounts for 0.02% of all prostate adenocarcinoma cases. Due to its nature and epidemiology, a diligent extraprostatic investigation has to be carried out. The disease often presents with unremarkable clinical symptoms and variable serum prostate-specific antigen results which may contribute to its late diagnosis which together with inconsistent immunohistochemical findings and unpredictable response to hormonal treatment pose both diagnostic and therapeutic challenges that negatively affect the prognosis. Conclusion: The study highlights the importance of a multidisciplinary approach and the need for diagnostic and therapeutic consensus within the research community in search of the primary site of the disease which may positively influence the prognosis.

Framed experiments and games are a useful medium to understand how context affects individual and group decision-making. They are particularly relevant for field research in agriculture, where alternative experimental designs can be costly and unfeasible. After a systematic review of the literature, we found that the volume of published studies employing coordination and cooperation games increased during the 2000-2020 period. In recent years, there has been greater attention given to natural resource management, conservation, and ecology areas, especially in strategic regions for agriculture sustainability. Other games, such as trust and risk games, have come to be regarded as standards of framed field experiments in agriculture. Regardless of sectoral focus, most games' results are subject to internal and external validity criticism. In particular, a significant portion of the games showed potential recruitment biases against women and no opportunities for a continued impact assessment. However, games' validity should be judged on a case-by-case basis. Specific cultural aspects of games might reflect the real context, and generalizing games' conclusions to different settings is often constrained by cost and utility. Overall, games in agriculture could benefit from more significant, frequent, and inclusive experiments and data – all possibilities offered by digital technology. Present-day physical distance restrictions may accelerate this shift. New technologies and engaging ways to approach farmers might represent a turning point for games in agriculture in the 21st century.

The severity and invasiveness of clinical outcomes from organic responses to trauma are influenced by individual, surgical and anesthetic factors. A stress response elicits neuroendocrine and immune reactions that may lead to multi-organ dysfunction. The degree of neuroinflammatory reflex activation from trauma can increase pro-inflammatory cytokine production, leading to endothelial dysfunction, glycocalyx damage, neutrophil activation and multisystem tissue destruction. A shift in patient treatment towards a neuroinflammatory perspective has prompted a new evaluation protocol for surgical patients, required to understand surgical pathogenesis and its link to chosen anesthesia-surgical methods. This study aims to provide a description of the mechanisms involved in the immune and neuroendocrine response and below is a summary of the main mediators, focusing on video laparoscopic surgeries, by examining its frequency usage by researchers. We performed a narrative review of data from databases like PubMed, MEDLINE, EMBASE, high-impact journals, and studies from the past decade that used inflammatory mediator analysis to compare anesthetic and surgical strategies. Results showed preference for certain biomarkers more sensitive to tissue trauma. These markers display distinct behaviors, temporal fluctuations and their dosages serve as a tool to measure and validate therapeutic approaches in perioperative systemic inflammation.

Porins are crucial proteins located in the outer membrane that directly influence antimicrobial resistance mechanisms and virulence in bacteria. In this study, a porin gene (Vp-porin) was cloned in V. parahaemolyticus, and the function of Vp-porin on biological characteristics and virulence was investigated. The results of sequence analysis showed that Vp-porin is highly conserved in Vibrio spp. and the predicted 3D structure showed it could form a transmembrane channel with 20 β barrel. Membrane permeabilization provides evidence that membrane integrity of ∆Vp-porin was damaged and the sensitivity to tetracycline, polymyxin B, rifampicin and cephalothin of ∆Vp-porin obvious increased. In addition, loss of Vp-porin damaged motility due to down-regulated flagellar synthesis. Besides, ∆Vp-porin exhibited attenuated cytotoxicity to Tetra-hymena. The relative survival rate of Tetrahymena infection with ∆Vp-porin was 86%, which is much high than that with WT (49%). Take together, Vp-porin in V. parahaemolyticus plays various roles in biological characteristics in membrane integrity, antimicrobial resistance and motility, and contributes to virulence.

Procedural Sedation and Analgesia (PSA) in the Emergency Department (ED) presents a crucial aspect of emergency medicine, enabling the execution of painful or distressing procedures with minimal patient discomfort. This narrative review delineates the pharmacological framework, methodologies, and clinical considerations integral to optimizing PSA, with a particular focus on pediatric and geriatric populations. Through a comprehensive review and analysis of current practices, this work evaluates the pharmacokinetics and pharmacodynamics of widely utilized sedatives and analgesics, including propofol, ketamine, dexmedetomidine, fentanyl, midazolam, etomidate, nitrous oxide, and remimazolam. Special attention is dedicated to the selection criteria based on patient-specific risk factors, procedural requirements, and the management of potential adverse effects. The manuscript also explores innovative sedation techniques and the integration of new pharmacological agents, emphasizing evidence-based approaches to enhance patient safety and outcome. Results underscore the significance of tailored sedation strategies, especially for vulnerable groups such as pediatric and geriatric patients, highlighting the need for meticulous pre-procedural assessment and monitoring to mitigate risks. Conclusions drawn advocate for a nuanced application of PSA, guided by current evidence and clinical guidelines, to improve the quality of care in emergency settings. This research reinforces the imperative for ongoing education, skill development, and adaptation of new evidence into clinical practice to advance procedural sedation and analgesia in the ED.

This study employs Geographic Information System (GIS) techniques to evaluate the walkability of Onaizah City, which serves as a representative model for a Saudi city situated in the Qassim region, north of the capital city, Riyadh. The goal is to evaluate how easily pedestrians can navigate the street network and identify areas that excel or need improvement in terms of walkability. The results offer insights for planning and development supporting sustainable initiatives. Approach; The study involves integrating GIS data, such as street layouts, land use patterns, and demographic information. By analyzing factors like integration values and choice values within the street network the study gauges’ walkability aspects. Furthermore, correlation analysis explores how spatial arrangements, influence walkability. By studying the case of a medium-sized Saudi city, which can then be applied to several Saudi cities. Cost distance analysis and cost-back correlation calculations are employed to determine pedestrian routes. Findings and Discussion; Through GIS techniques the study effectively assesses the walkability of Onaizah City by identifying three walking paths with lengths of (1401m, 1283m, and 1507m). The study reveals pedestrians' actual city distance. Weighted criteria assign 40% to heritage sites, 30% to green spaces, and 15% each to mosques/commercial sites. Preserving access to heritage sites and incorporating areas enhance walkability. Conclusion: Study enhances walkability understanding, offering data-driven planning suggestions. Urban planners prioritize pedestrian connectivity, considering GIS effectiveness and physical environment importance. Findings support walkability research and sustainable urban development.

Addressing the urgent sustainability challenges in the wine industry, this study explores the efficacy of sustainability-oriented innovations (SOIs) and smart farming technologies (SFTs) across wine value chains in Cyprus and Italy. Employing KPIs for a rigorous assessment, the research delves into the environmental, economic, and social impacts of these technologies. In Cyprus (SIP7), the integration of digital labelling and smart farming solutions led to a substantial reduction in pesticide usage by up to 75% and enhanced the perceived quality of wine by an average of 8%. Italy's SIP10 witnessed a 33.4% decrease in greenhouse gas emissions, with an additional benefit of a 5.3% improvement in intrinsic product quality. Notably, SIP10 also introduced a carbon credit system, potentially generating an average annual revenue of €4,140 per farm. These findings highlight the transformative potential of SOIs and SFTs in promoting sustainable practices within the wine industry, demonstrating significant advancements in reducing environmental impact, improving product quality, and enhancing economic viability. The study underscores the critical role of innovative technologies in achieving sustainability goals and provides a compelling case for wider adoption within the agricultural sector.

The “Pay-as-you-throw” scheme, PAYT, is an economic instrument of waste management that implements the “polluter pays” principle by charging inhabitants of municipalities according to the amount of residual, organic and bulky waste they send for third-party waste management. When combined with well-developed infrastructure to collect the different waste fractions (residual waste, paper and cardboard, plastics, bio waste, green cuttings, many recyclables) as well as with a good level of citizen’s awareness, its performance has frequently been linked to high collection rates of recyclables. However, the establishment and operation of PAYT systems can require significant resource inputs from municipalities. In this paper, PAYT is analysed through a case study from the German County of Aschaffenburg, covering nearly 20 years of implementation across 173,000 inhabitants. Key performance indicators applied include temporal trends in the county’s recyclables collection rate, waste treatment fees for residents and municipal waste management costs, benchmarked against German municipalities not implementing PAYT.

This study aims to provide an updated overview of the systematic evaluation and management of Post-Traumatic trigeminal neuropathic pain (PTTN) resulting from dental procedures or trauma. PTTN arises following an injury to the trigeminal nerve, which is responsible for sensory and motor functions in the maxillofacial region. The etiology encompasses various dental procedures and craniofacial trauma, leading to a spectrum of symptoms, from tingling to severe pain. Diagnostic challenges stem from the absence of standardized criteria and the overlap with focal neuralgia, necessitating comprehensive evaluation. Misdiagnosis can result in prolonged suffering and unnecessary procedures. Successful management hinges on prompt diagnosis and interdisciplinary collaboration, with early intervention crucial in mitigating chronicity. While nerve recovery post-trauma is challenging, preventive measures through accurate evaluation and treatment are paramount.  Management for PTTN includes non-invasive and surgical interventions. Non-invasive intervention includes systematic and local pharmacological management. This review enhances uniformity in PTTN evaluation and treatment approaches despite standardized study limitations.

Familial pancreatic cancer (FPC) represents a significant yet underexplored area in pancreatic cancer research. Basic research efforts are notably limited, and when present, they are predominantly centered on BRCA1 and BRCA2 mutations due to the scarcity of other genetic variants associated with FPC, leading to a limited understanding of the broader genetic landscape of FPC. This review examines the current state of FPC research, focusing on the molecular mechanisms driving pancreatic ductal adenocarcinoma (PDAC) progression. It highlights the role of homologous recombination (HR) and its therapeutic exploitation via synthetic lethality with PARP inhibitors in BRCA1/2-deficient tumors. The review discusses various pre-clinical models of FPC, including conventional two-dimensional (2D) cell lines, patient-derived organoids (PDOs), patient-derived xenografts (PDXs), and genetically engineered mouse models (GEMMs) as well as new advancements in FPC research.

For decades, the discoverability and visibility of a paper relied on the readership of the academic journal where the publication was issued. The public's increasing interest in scientific research, particularly in biomedicine, has led news media outlets to play a significant role in disseminating scientific advances. This investigation, which explores the potential impact of news media stories on the citations and altmetrics of a paper, was conducted with thoroughness and rigour. A total of 2020 open access biomedical research papers, all published in the same year, 2015, and in journals with an impact factor between 10 and 14, were investigated. The papers were split into two groups based on the sole criterion of receiving or not receiving news media coverage. Papers with news media coverage accounted for 44% of the total. They received, on average, 60% more citations, 104% more blogs, 150% more X posts, 106% more Facebook reports, 40% more Wikipedia references, 85% more videos, and 51% more Mendeley readers than papers without news media coverage. The correlation between news media outlets and increased citations and altmetrics is evident. However, the broader societal impact of news media coverage, in terms of bringing scientific matters or discoveries to the public eye, appears to be more robust when compared to the reactions of the scientific community.

This article presents an Internet of Things (IoT)-enabled system meticulously engineered for comprehensive environmental assessment, encompassing air quality, temperature, and humidity. Simultaneously, the devised system integrates cutting-edge MQ6 sensors, adept at detecting ambient gases, with a primary focus on monitoring Liquefied Petroleum Gas (LPG) and Butane gases concentrations in the atmosphere. This distinctive feature not only facilitates the identifi-cation of hazardous gases leakages, particularly common in household LPG usage, but also empowers preemptive measures. The environmental parameters, air quality, temperature, and humidity, are precisely gauged through the utilization of MQ135 and DHT11 sensors. The con-trolling and managing of the hardware component of the system (i.e., device) is assured by an Arduino UNO, that orchestrates the collection of sensor data, transmitting it seamlessly to both the ThingSpeak cloud and a Convolutional Neural Network (CNN) model. By interfacing with ThingSpeak, the device ensures the systematic storage and visualization of environmental data, streamlining monitoring and analysis processes. In the event of perilous gases detection, the system promptly triggers an alarm, concurrently dispatching a real-time notification to the device owner via the integrated If-This-Then-That (IFTTT) application programming interface (API). To further enrich environmental awareness, an embedded microphone captures audio recordings, subsequently processed by a CNN-based deep learning model. This model employs advanced techniques such as spectrogram generation, Convolution2D, and MaxPooling2D within a Se-quential Model architecture, to attain elevated levels of accuracy, furnishing insightful interpre-tations of ongoing activities within the environment.

This study innovatively assesses the Mun River flow components in Thailand, integrating Artificial Neural Networks (ANN) and Isotopic (18O) End-Member Mixing Analysis (IEMMA). It quantifies the contributions of the Upper Mun River (UMR) and Chi River (CR) to the overall flow, revealing a discrepancy in their estimated contributions. ANN predicts the UMR and CR contribute approximately 70.1% and 29.5% respectively, while IEMMA indicates a more pronounced disparity with 84% from UMR and 16% from CR. This divergence highlights the distinct perspectives of ANN, focusing on hydrological data patterns, and IEMMA, emphasizing isotopic signatures. Despite discrepancies, both methods validate UMR as a significant contributor to the overall flow, highlighting their utility in hydrological research. The findings underscore the complexity of river systems and advocate for an integrated approach of river flow analysis for a comprehensive understanding, crucial for effective water resource management and planning.

This study investigates the dynamic relationship between leverage and dividend policy in Nigerian manufacturing enterprises. Utilizing panel data from 26 firms between 2016 and 2020, our findings reveal that while dividend payments boost firm value, leverage typically diminishes it. Intriguingly, when leverage interacts with dividend policy, the combined effect on firm value becomes significantly positive. This observation, despite Nigeria's institutional differences from advanced economies, supports modern capital structure theories such as the pecking order and static trade-off theories. Our results suggest that for mature Nigerian companies with limited growth opportunities, high leverage and dividends effectively mitigate the "free cash flow" problem, curbing managerial tendencies to overinvest or underinvest. Thus, leverage and dividends serve as complementary mechanisms for monitoring and controlling managerial discretion. Consequently, firms with high leverage ratios can leverage dividend policies as disciplinary tools, and vice versa. This underscores the necessity for Nigerian manufacturing firms to carefully balance debt and equity to sustain market confidence and investment potential.

Background: There has been a lack of tools to identify listening difficulties in school settings for both hearing and hearing-impaired Italian students. Thus, the present study aimed to realize cross-cultural adaptation and validation of the Listening Inventory for Education-Revised for Italian students (LIFE-R-ITA). Methods: Following the validation of two forward-backward translations by a multidisciplinary committee, the content validation for the LIFE-R-ITA was performed by pre-testing six implanted children (8-18 years old). After minor cross-cultural adaptations, normative data were collected from a sample of 223 hearing students enrolled in different school settings and educational degrees. Results: For the LIFE-R-ITA, hearing students showed an average score of 72.26% (SD=11.93), reflecting some listening difficulties. The subscales (LIFE total, LIFE class, and LIFE social) indicated good internal consistency. All items were shown to be relevant. Most challenging situations happened when listening in large rooms, especially when other students made noise. LIFE social scores were significantly worse than those of LIFE class (p &lt; 0.001). Conclusions: The LIFE-R-ITA may support teachers and clinicians in assessing students’ self-perception of listening at school. Such understanding may help students overcome their listening difficulties, by planning and selecting the most effective strategies among classroom interventions.

Radiotherapy remains a cornerstone in cancer treatment, leveraging ionizing radiation to eradicate malignant cells. Its efficacy, however, is frequently challenged by the heterogeneous sensitivity of tumors and surrounding tissues to radiation. Therefore, understanding the molecular mechanisms underlying radiosensitivity is crucial for improving treatment outcomes. Among the myriad of molecular players involved, the tumor suppressor protein p53 stands out as a central regulator with significant implications for radiosensitivity. Known as the “guardian of the genome,” p53 plays a pivotal role in maintaining genomic stability and orchestrating cellular responses such as cell cycle arrest, DNA repair, apoptosis, and senescence in response to various stress signals, including radiation-induced DNA damage. Activation of p53 triggers the transcription of target genes involved in DNA repair pathways, such as p21, MDM2, and GADD45, facilitating the repair of radiation-induced DNA damage or the elimination of irreparably damaged cells. This, in turn, influences the overall radiosensitivity of tissues. Mutations in the TP53 gene, which encodes p53, are among the most frequent genetic alterations in human cancers. Loss or dysfunction of p53 can compromise the cellular response to radiation, leading to increased resistance to therapy and poorer clinical outcomes. Conversely, intact p53 function is associated with enhanced radiosensitivity due to its ability to promote cell cycle arrest and apoptosis in response to radiation-induced DNA damage. In conclusion, elucidating the molecular mechanisms by which p53 influences radiosensitivity is essential for advancing our understanding of radiation response in cancer cells and developing more effective therapeutic approaches in cancer treatment. This review provides a comprehensive overview of the multifaceted role of p53 in modulating cellular responses to radiation, emphasizing its influence on radiosensitivity.

A theoretical account of development in mesocortical anatomy is derived from the free energy principle, operating in a neural field with both Hebbian and anti-Hebbian neural plasticity. An elementary structural unit is proposed, in which synaptic connections at mesoscale are arranged in paired patterns with mirror symmetry. Exchanges of synaptic flux in each pattern form coupled spatial eigenmodes, and the line of mirror reflection between the paired patterns operates as a Markov blanket, so that prediction errors in exchanges between the pairs are minimized. The theoretical analysis is then compared to the outcomes from a biological model of cortical neurodevelopment, in which neuron precursors are selected by apoptosis for cell body and synaptic connections maximizing synchrony and also minimizing axonal length. It is shown that this model results in patterns of connection with the anticipated mirror symmetries, at micro-, meso- and inter-arial scales, among lateral connections, and in cortical depth, explaining the spatial organization and functional significance of neuron response preferences, and compatible with features of both columnar and noncolumnar cortex. Multi-way interactions of mirrored representations provide a preliminary anatomically realistic model of cortical information processing.

The aim of this study was to analyze the profile of IgG subclasses in COVID-19 convalescent Puerto Rican subjects and compare this profile with those exhibited by no-infected immunocompetent or immunocompromised subjects that received the mRNA vaccine. The most notable find-ngs from this study are: 1) Convalescent subjects that were not hospitalized developed high and long-lasting antibody response. 2) Both, IgG1 and IgG3 are the subclasses more prevalent in the SARS-CoV-2 infected population whereas IgG1 is more prevalent after vaccination. 3) Individuals that first had the infection and further received two doses of mRNA vaccines exhibited more robust neutralizing capacity against Omicron than those that were never infected and received two doses of Pfizer-BioNTech vaccine. 4) A class switch toward the “anti-inflammatory” anti-body isotype IgG4 is induced a few weeks after the third dose, which peaked abruptly and remained at high levels for a long period. Moreover, the high levels of IgG4 are concurrent with high neutralizing percentages against various VOC including Omicron. 5) Subjects with IBD also develop IgG4 after the third dose, although these antibody levels have limited effect on the neutralizing capacity. Knowing that the mRNA vaccines do not prevent reinfections, all Omicron sub-variants that are dominant worldwide have shown to be less pathogenic, and the IgG4 levels have been associated to immunotolerance and causative of numerous negative effects, the recommendations of successive administration of booster vaccinations to people should be revised.

Keywords: Artificial Intelligence in Implantology; AI in Dental Implantology; Machine Learning in Dental Implantology; Deep Learning in Implant Dentistry; Robotics in Dental Implantology; AI-Based Implant Planning.

This study aims to develop low-cost, eco-friendly and circular economy-compliant composite materials by creating three types of magnetorheological suspensions (MRSs) utilizing lard, carbonyl iron (CI) microparticles, and varying quantities of gelatin particles (GP). These MRSs serve as dielectric materials in cylindrical cells used to fabricate electric capacitors. The equivalent electrical capacitance (C) of these capacitors is measured under different magnetic flux densities (B≤160 mT) superimposed on a medium-frequency electric field (f = 1 kHz) over a period of 120 seconds. The results indicate that at high values of B, by increasing the GP content to 20 vol.% decreases the capacitance C up to about one order of magnitude compared to MRS without GP. From the measured data, the average values of capacitance Cm are derived, enabling the calculation of relative dielectric permittivities (ϵr′) and the dynamic viscosities (η) of the MRSs. It is demonstrated that ϵr′ and η can be adjusted by modifying the MRS composition and fine-tuned through the magnetic flux density B. A theoretical model based on the theory of dipolar approximations is used to show that ϵr′, η and the magnetodielectric effect can be coarsely adjusted through the composition of MRSs and finely adjusted through the values B of the magnetic flux density. The ability to fine-tune these properties highlights the versatility of these materials, making them suitable for applications in various industries, including electronics, automotive and aerospace.

In this article, a generalization of the geometry of Grassmannian chain complex of free abelian groups generated by the projective configuration of points and Cathelineau's infinitesimal complex of polylogarithmic groups is proposed. Firstly, homomorphisms for weight n =2 up to weight n=6 will be introduced to connect sub-complexes of Grassmannian and Cathelineau. Lately, generalization of these morphisms will be shown for weight n=N. The associated diagrams will also be proven to be commutative and bi-complex.

Meat serves as a vital component of the human diet, offering a rich source of protein and essential trace elements. China stands as both a significant producer and consumer of meat on a global scale, leading the world in terms of total meat production and consumption. As the standard of living within the country continues to rise, there is a growing emphasis on the nutritional value and safety of meat consumption. The tenderness of meat is a critical factor influencing its overall quality. Traditionally, tenderness has been assessed through shear force testing, a method that is inherently destructive, inefficient, and results in considerable sample wastage. In light of these drawbacks, non-destructive testing techniques have emerged as a preferred alternative, promising greater accuracy, efficiency, and convenience without compromising the integrity of the samples. This paper delves into the application of five advanced non-destructive testing technologies in the realm of meat tenderness assessment. These include near-infrared spectroscopy, hyperspectral imaging, Raman spectroscopy, airflow optical fusion detection, and nuclear magnetic resonance detection. Each technology is scrutinized for its respective strengths and limitations, providing a comprehensive overview of their current utility and potential for future development. Moreover, the integration of these techniques with the latest advancements in artificial intelligence (AI) technology is explored. The fusion of AI with non-destructive testing offers a promising avenue for the development of more sophisticated, rapid, and intelligent systems for meat tenderness evaluation. This integration is anticipated to significantly enhance the efficiency and accuracy of quality assessment in the meat industry, ensuring a higher standard of safety and nutritional value for consumers. The paper concludes with a set of technical recommendations aimed at guiding the future direction of non-destructive, AI-enhanced meat tenderness detection, thereby contributing to the ongoing improvement of the meat industry in China and beyond.

Background: Accidental caustic burns of the esophagus in children represent a significant global health challenge, often necessitating esophageal reconstruction. The aim of this study is to compare the efficacy and morbidity related to esophagus replacement with colonic and gastric tube transplants in a pediatric population followed for caustic stenosis. Method: This retrospective study was conducted at a tertiary pediatric surgery unit for children treated from January 1989 to December 2022. We compared colonic and gastric tube esophageal replacement. Short-term (within 30 days) and mid-term outcomes and complications were reviewed. Statistical evaluation was considered using a Chi-square test for categorical data analysis. Results: A total of 124 children with caustic esophageal burns were included. Among them, 23 (18.5%) had a gastric tube transplant for esophagus replacement and 101 (81.5%) a colonic transplant. During surgical intervention, we found a significantly higher risk of complications when using a colonic transplant (34%, p < 0.001). There was no significant statistical difference in postoperative short-term and mid-term complications between the two techniques. Twenty-six (26%) of the children required a reoperation, with a higher risk in the gastric tube transplant group (p < 0.001). Endoscopic dilatation after surgery was also performed on a higher number of children who had received a gastric tube transplant (p = 0.005). Overall, 97.6% recovered full normal oral feeding. Conclusions: We found that colonic and gastric tube replacement are both good options for pediatric esophageal replacement after a caustic injury and show effectiveness over time. Gastric tube transplants carried a slightly higher risk of reoperations and a higher number of dilatations post-surgery. However, our groups are not really comparable due to the much higher number of colonic transplants. Both surgical options have to be considered during surgery and the choice depends on the anatomy of the patient. Our future research will focus on assessing long-term quality of life and potential risk of neoplastic complications.

In winter sports, the equipment often comes into contact with snow or ice, and this contact generates a force that resists motion. In some sports, such as cross-country skiing, this resistive force can significantly affect the outcome of a race, as a small reduction in this force can give an athlete an advantage. Researchers have examined the contact between skis and snow in detail, and to fully understand this friction, the entire ski must be studied at various scales. At the macro scale, the entire geometry of the ski is considered and the apparent contact between the ski and the snow is considered and at the micro scale the contact between the snow and the ski base ski-base textures. In the present work, a method for characterising contact between the ski-base texture and virtual snow will be presented. Six different ski-base textures will be considered. Five of them are stone-ground ski bases, and three of them have linear longitudinal textures with a varying number of lines and peak-to-valley height, and the other two are factory-ground “universal” ski bases. The sixth ski base has been fabricated by a steel-scraping procedure. In general, the results show that a ski base texture with a higher Spk-value has less real contact area, and that the mutual differences can be large for surfaces with similar Sa-values. The average interfacial separation is, in general, correlated with the Sa-value, where a “rougher” surface exhibits a larger average interfacial separation. The results for the reciprocal average interfacial separation, which is related to the Couette type of viscous friction, were in line with the general consensus that a “rougher” texture performs better at high speed than a “smoother” one, and it was found that a texture with high Sa and Spk values resulted in a low reciprocal average interfacial separation and consequently low viscous friction. The reciprocal average interfacial separation was found to increase with increasing real contact area, indicating a correlation between the real area of contact and the Couette part of viscous friction.

In this paper were analyzed the effects of double reduction and annealing during rolling process on texture evolution in an ultrathin sheet of low carbon steel. Experimental samples were obtained from each process stage. EBSD technique and correlated tools as orientation density functions and pole figures were used to analyze the microstructural changes and the texture. Results show that {111} recrystallized grains were formed during process, reducing dramatically gamma-fibre texture intensity and generating an adequate finished product for deep die stamping.

Predicting anomalies in manufacturing assembly lines is crucial for reducing time and labor costs and improving processes. For instance, in rocket assembly, premature part failures can lead to significant financial losses and labor inefficiencies. With the abundance of sensor data in the Industry 4.0 era, machine learning (ML) offers potential for early anomaly detection. However, current ML methods for anomaly prediction have limitations, with F1-measure scores of only 50% and 66% for prediction and detection, respectively. This is due to challenges like the rarity of anomalous events, scarcity of high-fidelity simulation data (actual data is expensive), and the complex relationships between anomalies not easily captured by traditional ML approaches. Specifically, these challenges relate to two dimensions of anomaly prediction: predicting when anomalies will occur and understanding the dependencies between them. This paper introduces a new method called Robust and Interpretable 2D Anomaly Prediction (RI2AP) designed to address both dimensions effectively. RI2AP is demonstrated on a rocket assembly simulation, showing up to a 30-point improvement in F1 measure compared to current ML methods. This highlights its potential to enhance automated anomaly prediction in manufacturing. Additionally, RI2AP includes a novel interpretation mechanism inspired by a causal-influence framework, providing domain experts with valuable insights into sensor readings and their impact on predictions. Finally, the RI2AP model is deployed in a real manufacturing setting for assembling rocket parts. Results and insights from this deployment demonstrate the promise of RI2AP for anomaly prediction in manufacturing assembly pipelines.

Population growth, climate change, changes to land use, and the advent of emerging infectious disease agents has put our abilities to feed the growing global population at risk, which is of particular concern in low- or middle-income countries. Research to improve the profitability and sustainability of common livestock production systems is key to tackling this issue. However, despite considerable research investment to address this concern, there has been no attention to development of robust methodologies for the synthesis of existing research evidence and its re-use. Syntheses of evidence are critical for fostering best practices, minimising wastage of valuable research resources, and enabling informed decision and policy making. Whilst the use of evidence syntheses is well entrenched in human healthcare, their use within animal sciences is limited and specific methodologies for performing them are underdeveloped. In this call to action, we propose some methodological development activities that should be undertaken within this field of research to increase the potential of evidence syntheses to contribute to tackling pressing societal issues relating to livestock agriculture.

Background/Objectives: Although the role of F-18 FDG PET/CT imaging is well established in oncology, its diagnostic value in routine monitoring for recurrent colorectal cancer (CRC) is still controversial. The aim was to evaluate the diagnostic value of FDG PET/CT in detecting recurrent CRC in correlation with CEA, CA 19-9 levels, and conventional imaging modalities (CIM). Methods: Between 2009 and 2023, we retrospectively studied 134 CRC patients referred for FDG PET/CT imaging on the suspicion of recurrence based on elevated CEA and/or CA 19-9, and/or equivocal radiological findings. According to the Institutional Tumor Board CRC protocol, after initial treatment which was dependent on TNM stage (neoadjuvant therapy, primary resection or adjuvant treatment), patients underwent a standard 5-year surveillance including CEA and CA 19-9 measurements, CIM, and colonoscopy every 6 months. The statistics including univariate and multivariable analyses were conducted using the IBM SPSS 20.0 statistical software. P-values <0.05 were considered statistically significant. Results: Recurrent CRC was confirmed in 54/134 (40.3%) patients with elevated tumor markers. FDG PET/CT shows high diagnostic performance in detecting recurrent CRC with sensitivity, specificity, PPV, NPV, and accuracy of 94.4%, 82.5%, 78.5%, 95.7%, and 87.3%, respectively. The CEA shows a high sensitivity of 98.1%, but both low specificity and accuracy of 15% and 48.5%, respectively. The sensitivity, specificity, and accuracy, for CA 19-9 and CIM for the correct diagnosis in CRC patients were: 44.4%, 67.5%, 58.2%, and 51.9%, 98.8%, 79.9%, respectively. The AUC for FDG PET/CT, elevated CEA levels, CIM, and elevated CA 19-9 levels was 0.885 (95% CI: 0.824-0.946; p<0.001), 0.844 (95% CI: 0.772-0.916; p<0.001), 0.753 (95% CI: 0.612-0.844; p<0.001); and 0.547 (95% CI: 0.442-0.652; p=0.358). Univariate analysis shows that both FDG PET/CT- and CIM-positive results were highly associated with CRC recurrence (p<0.001 and p<0.001, respectively), while gender, mucinous tumor type, presence of initial lymph node metastasis (N+), and presence of initial distant metastasis (M+) have no significance (p=0.211, p=0.158, p=0.583, and p=0.201, respectively). Our multivariate analysis shows that independent predictors for CRC recurrence are: positive FDG PET/CT scans (p<0.001), positive CIM results (p=0.001) and elevated CA19-9 levels (p=0.023). Although CA 19-9 was not detected as a statistically significant predictor in the univariate analysis (p=0.358), in a multivariate analysis it was recognized as a significant predicting factor in detecting CRC recurrence (p=0.023). Conclusions: FDG PET/CT shows a high diagnostic efficacy in CRC recurrence detection, in correlation with CEA levels, CA 19-9 levels, and CIM. This imaging modality should be routinely integrated into the postoperative follow-op in patients with elevated tumor markers.

Hirschsprung disease (HSCR, incidence 1/5000 live births) is caused by failure of neural crest-derived precursors to migrate, survive, proliferate or differentiate during the embryonic development of the Enteric Nervous System (ENS), which could be disrupted by many factors, in-cluding inflammatory processes. The NF-κB family controls several biological processes includ-ing inflammation, neurogenesis and cell migration. With the aim of studying the potential role of NF-κB in HSCR, we have analyzed the expression of the NF-κB main subunits and other NF-κB-related genes by RT-qPCR in HSCR tissue samples (sub-divided in ganglionic and agan-glionic segments). We found a decreased gene expression of the NF-κB main subunit RelA/p65, but also of IkBα, TNF-α, TFGBR2 and ERBB3 in the pathologic distal aganglionic segments com-pared to the proximal ganglionic segments. Moreover, we could also confirm the lower protein expression of RelA/p65 in the aganglionic distal segments by immunofluorescence staining. Fur-ther, we show that the expression of RelA/p65 in the proximal segments concurs with lymphocyte infiltration in the bowel tissue, indicating a pro-inflammatory activation of p65 in the proximal ganglionic HSCR tissue in the patients analyzed. In all, our findings suggest that the modulation of NF-κB signaling in the neuro-enteric system does obviously contribute to the pathological ef-fects in HSCR.

Abstract: More than 40 hypotheses predict associations between features of nest architecture and at least one measure of reproductive success. However, quantitative studies of reproductive consequences of nest characteristics remain scarce. In addition, most studies were conducted on model species of which nests can be easily monitored with artificial nest-boxes. Here we review the replicability of research protocols and findings in model species with many repeat studies focusing mainly on nest-size components, animal-derived nest material, or fresh greenery in blue tits (Cyanistes caeruleus), great tits (Parus major), tree swallows (Tachycineta bicolor), and starlings (Sturnus spp.). The studies looked for correlations between nest traits and aspects of breeding performance that can be easily quantified in the field, such clutch size, brood size at hatching or fledging, the % of eggs that hatch or fledge, or nestling characteristics assumed to reflect qualities associated with survival probabilities (e.g., morphometry, body condition, blood profiles). We discuss the consequences of poor replicability of research methodologies and provide explanations for why many of these studies reported poor associations between nest design and breeding success at different spatiotemporal scales. We also make suggestions for future research. Keywords: Nest design, Breeding success, Nest-box, Cavity-nesting birds, Replicability

As a crucial part of head protection equipment, research on the material and structural application of helmet liners has always been a hot topic in the field of helmet manufacturing. This paper aims to introduce the most common helmet liner materials, including traditional polystyrene, polyethylene, polypropylene, and others, as well as emerging materials such as anisotropic materials, and polymer nanocomposites. In addition, the design principles of helmet liner structure are discussed, including the evolution of multi-layer structure, integration of geometric irregular bubbles, etc., to enhance energy absorption capacity. Advanced manufacturing processes such as additive manufacturing technology are introduced to fabricate complex structures. Finally, the application of biomimetic structures in helmet liner design is explored. For example, the structure of biological tissue can be used to design a helmet liner structure with superior energy absorption performance. On this basis, the idea of bionic structures is extended to the combination of plant stalks and animal skeletal structures, and additive manufacturing technology is used to significantly reduce energy loss during elastic yield energy absorption, thus designing a reusable helmet. This provides a promising research direction for future helmet liner materials and structural applications.

Diffusion Models (DMs) are probabilistic models that create realistic samples by simulating the diffusion process, gradually adding and removing noise from data. These models have gained popularity in domains such as image processing, speech synthesis, and natural language processing due to their ability to produce high-quality samples. As DMs are being adopted in various domains, existing literature reviews that often focus on specific areas like computer vision or medical imaging may not serve a broader audience across multiple fields. Therefore, this review presents a comprehensive overview of DMs, covering their theoretical foundations and algorithmic innovations. We highlight their applications in diverse areas such as media quality, authenticity, synthesis, image transformation, healthcare, and more. By consolidating current knowledge and identifying emerging trends, this review aims to facilitate a deeper understanding and broader adoption of DMs and provide guidelines for future researchers and practitioners across diverse disciplines.

In this paper, we introduce a specialized, fully automated experimental arrangement designed for assessing the effectiveness of augmented and virtual reality technologies in healthcare setting and explore its design principles focusing on depth sensor characterization. The main goal of this project is to establish a robust benchtop platform for the quantitative evaluation of extended reality technologies in a controlled environment, emphasizing the practical assessment of augmented reality head-mounted devices. We outline a design concept and considerations for an experimental configuration aimed at creating a realistic testing environment. This apparatus comprises an observation platform mounted on a three-degree-of-freedom motorized system and a test phantom stage. Focusing on real-case scenarios, we utilized a range of sensors, including readily available range-sensing cameras and commercial augmented reality headsets, such as the Intel RealSense L515 LiDAR camera, mounted on the motion control system. The setup enabled automated data collection and facilitates controlled assessments and validation of various facets of augmented reality technologies, including object, hand, and head tracking, as well as static and dynamic image registration. This paper describes the system architecture, the process of automated data collection, and presents several evaluation studies conducted with this setup, providing insights into the quality and temporal noise associated with static or moving objects or observers in augmented reality applications.

In the process of expanding the application of electronic licenses in the Chinese agricultural sector, challenges such as inconsistent information standards, poor interoperability, significant data barriers, and lack of regulatory basis are encountered. By examining online information and practical data of agricultural electronic licenses in the 31 provincial-level administrative units in mainland China, variations in the reasons for promoting the expanded application of electronic licenses in different regions were identified. It is believed that strategies should be proposed around key factors such as government capacity, economic development, social needs, and intergovernmental relations. Suggestions include enhancing the intensity of information aggregation, diversifying the management entities, advancing the intelligence of underlying technology, and improving the completeness of legal rules. New conceptual proposals, such as constructing a database for agricultural information collection, establishing a multi-entity management authorization mechanism, implementing intelligent applications of electronic licenses at the grassroots level, and developing specialized legal rules, require further validation.

: Rasmussen’s encephalitis (RE) stands as a rare neurological disorder marked by progressive cerebral hemiatrophy and epilepsy resistant to medical treatment. Despite extensive study, the primary cause of RE remains elusive, while its histopathological features encompass cortical inflammation, neuronal degeneration, and gliosis. The underlying molecular mechanisms driving disease progression remain largely unexplored. In this case study, we present a patient with RE who underwent hemispherectomy and has remained seizure-free for over six months, experiencing gradual motor improvement. Further-more, we conducted molecular analysis on the excised brain tissue, unveiling a decrease in the expres-sion of cell cycle-associated genes coupled with elevated levels of BDNF and TNF-α proteins. These findings suggest potential involvement of cell cycle regulators in the progression of RE.

Background: breastfeeding is the optimal nourishment for infants and recommends that children commence breastfeeding within the first hour of birth and be exclusively breastfed for the initial 6 months of life. Our objective was to determine which factors related to mothers could influence the degree of exclusive breastfeeding during hospitalization, as well as to assess breastfeeding mothers' attitudes towards breastfeeding. Methods: A multicenter cross-sectional study was undertaken in the healthcare area of Santiago de Compostela, Spain. The reduced Iowa Infant Feeding Attitude Scale (IIFAS-s) was employed to gauge maternal attitudes toward feeding their baby. Results: 64 women were studied. The overall score of IIFAS-s (mean ± standard deviation) was 36.95 ± 5.17. No use of pacifier by the newborn was associated with a positive attitude for breastfeeding. Having previous children (ORa=6,40; IC95% 1,26 – 32,51) and previous experience with breastfeeding (ORa=6,70; IC95% 1,31 – 34,27) increase the likelihood of exclusive breastfeeding during admission. Conclusions: It is important to identify the factors that contribute to increasing the probability that mothers choose exclusive breastfeeding. We must guide our training efforts to these factors.

We analyzed the interaction of two acceptor materials, reduced graphene oxide (RGO) and [6,6]-phenyl-C6-butyric acid methyl ester (PCBM), and poly(3-hexylthiphene) (P3HT), as well as the dependence of its photophysical properties with the temperature in the range 90 to 300 K. The nanocomposite of the films was analyzed by optical absorption ultraviolet-visible (UV-Vis) and photoluminescence (PL) and emission ellipsometry (EE) in a function of sample temperature. The surface morphology was studied by atomic force microscopy (AFM). We noted that onset levels (Eonset) of the nanocomposite of P3HT and RGO is smaller than the others. The PL spectra showed the presence of anomalies in the emission intensities in the nanocomposite of P3HT and PCBM. It was also possible to determine the electron-phonon coupling by calculating the Huang-Hys parameters and its dependence with the sample’s temperature. Through EE it was possible to analyze the degree of polarization and the anisotropy. We observed a high degree of polarized emission of the P3HT films which varies subtly according to the temperature. For nanocomposites with RGO the polarization degree in the emission decreases and the roughness on the surface increases. As a result, the RGO improves the energy transfer between adjacent polymer chains at the cost of greater surface roughness. Then, the greater energy transfer may favor applications of this type nanocomposite in OPVC's with enhancement in energy conversion efficiency.