Active transportation, such as walking, cycling, and micro-mobility modes, has received a lot of attention in recent years due to its potential benefits to urban residents, such as less traffic, better air quality, more opportunities to get exercise, and an overall higher quality of life. In this study, we used Classification and Regression Trees (CART) to compare and contrast three mobility options: shared micro-mobility, individual micro-mobility, and walking. We surveyed 219 people living in Budapest, Hungary, to learn more about their travel habits and investigate the demographic elements that influence people's mode choice, such as age, gender, ownership of micro-mobility modes, education, job, and income. Results showed that ownership of personal micro-mobility modes, and age as important predictors of active travel mode choice. Males seem to prioritize cost and weather conditions when choosing shared micromobility modes, while females value safety and weather conditions. Our findings can guide policy decisions and urban planning initiatives by identifying the most significant predictors of mode choice and evaluating the possible benefits and drawbacks of each mode.

The perturbation in water balance rather than any change in salt content is the main cause of hyponatremia, the most frequent electrolyte abnormality defined as serum sodium concentration <135 mEq/L. Hyponatremia may be divided as mild (Na>120 mEq/L) or severe (Na<120 mEq/L) hyponatremia, most frequently observed in elderly ICU hospitalized patients. Based on tonicity hyponatremia may be hypotonic (decreased concentration of solute), isotonic, and hypertonic (falsely low sodium). According to the volume of the extracellular fluid (ECF) hyponatremia is further divided as hypovolemic, euvolemic, or hypervolemic hyponatremia. Finally, hyponatremia may develop rapidly as acute (<48 h) with usually severe symptoms, or slowly as chronic hyponatremia, being usually asymptomatic or with mild symptoms. Patient’s medical history and clinical symptoms and signs could point to a certain diagnostic direction. Acute severe hyponatremia is presented with headaches, vomiting, nausea, fatigue, impaired cognition, gait with increased falls symptoms etc., while the severe symptomatology due to hyponatremic encephalopathy is presented as confusion, agitation, seizures, or even coma and death. Nevertheless, an urgent evaluation of the volume and neurological status is essential for prevention of neurological damages. The treatment of hyponatremia should of course be based on the underlying cause, the duration and degree of hyponatremia, the observed symptoms, and volume status of patient.

The current study presents a computational fluid dynamics model designed to simulate the isolation of 2D graphene components from their dispersion using a microfiltration hollow fiber membrane unit. The model utilizes Navier-Stokes and mass conservation equations to predict the flow and concentration behaviors in the system, and it employs the resistance-in-series approach to couple the fouling of the non-exfoliated graphites in the dispersion to the model. Specifically, the model accounts for the effects of the concentration polarization and cake formation of the fouling component, resulting in the increment of the transmembrane pressure (TMP) of the system. Additionally, we assumed the wettability of polymeric membrane’s inner wall enhances upon fouling by the flat layered structure material, leading to the reduction of the transmemrabe pressure. This approach demosntrates accurate reproduction of the exceptional experimental TMP behavior corresponding to the fouling of the graphite.

Malignant neoplasms arising from the gastrointestinal (GI) tract are among the most common cancer types with a high mortality rate. Despite advances in treatment in a small subgroup harboring targetable mutations, the outcome remains poor, accounting for one in three cancer-related deaths observed globally. As a promising therapeutic option in various tumor types, immunotherapy with immune checkpoint inhibitors has also been evaluated in GI cancer, albeit with limited efficacy except for a small subgroup expressing microsatellite instability. In the quest for more effective treatment options, energetic efforts have been placed to evaluate the role of several immunotherapy approaches comprising of cancer vaccines, adoptive cell therapies and immune checkpoint inhibitors. In this review, we report our experience with personalized dendritic cell cancer vaccine and cytokine-induced killer cell therapy in three patients with GI cancers and summarize current clinical data on combined immunotherapy strategies.

Almost 115 million tons of fibers of which almost 90 million tons of chemical fibers were produced in the world in 2021, which are mainly used for the production of clothing and footwear. 30% of textile and apparel products are never sold, which means an extreme waste production. This article points out the possibilities of forecasting the sales of clothing in the case of one relatively large online store. Inadequate stocks of textile products in the company lead to loss and the need to sell products at a discount, which is undesirable for the company. The study in this article points to the calculation of the sales forecast for 2019 for the selected textile products, finding the analogy of the followed product sale. Sales for the years 2017 and 2018 serve as input data. The problem with textile products is that they have a short life cycle, i.e. the length of the life cycle is approximately half a year, and a high seasonality is also presented there. Therefore, the seasonal indices and Holt-Winters methods (multiplication and additional approaches) were used for products forecasting. Ultimately, this model could contribute to reducing the loss of unsold goods and thus reduce the waste of resources and increase the use of goods in other similar companies.

In the last years, various changes and enhancements have been made to the technical structure of the substituted boreholes in comparison to the old boreholes. Increasing production capabilities from an individual borehole and/or a borehole field has engineering significant and economic value. Unfortunately, we are unable to change the composition of the aquifer lithology and its hydraulic properties and therefore, increasing the extraction capabilities from an individual borehole is possible by using technical improvements in drilling methods, in borehole design and in its final structure. This is illustrated through examples from two different aquifer basins, where substituted boreholes were drilled adjusted to the old borehole and in the same yard. The substituted boreholes were drilled to similar depth and to the same lithology as those in the old boreholes. That is, any discrepancies in hydraulic parameters attributable to changes and improvements in the borehole design and structure.

In the continued battle against one of the oldest enemies known to mankind, Mycobacterium tuberculosis (MTB), the emergence of drug resistance among children poses multiple challenges for early detection and treatment. Molecular diagnostics and newer drugs like bedaquiline and delamanid have strengthened the armamentarium and helped design convenient, safe and child-friendly therapeutic regimens against drug-resistant tuberculosis (TB). Preventive strategies like treatment of TB infection among children living in close contact with patients with drug-resistant TB and effective vaccines against TB are currently in the investigative stages of development and implementation. In addition to the implementation of recent novel diagnostics and treatment modalities, effective psychosocial and nutritional support, as well as dedicated monitoring for compliance and adverse effects, are crucial determinants for successful treatment outcomes in these children.

This study investigates the critical success factors (CSFs) of Lean Six Sigma (LSS) implementation and their impact on organizational growth in Nigerian enterprises. The objectives were to identify crucial CSFs for successful LSS deployment and assess their significance in achieving organizational growth. A mixed-method approach was used, including literature analysis, expert judgments, and a survey of 130 participants from various industries. The survey questionnaire employed a 5-point Likert scale to collect data on LSS CSFs and implementation success metrics. Structural equation modeling (SEM) with SmartPLS 4.0 analyzed the data, revealing that LSS CSFs significantly contribute (up to 39.2 percent) to the success of LSS implementations. The study identified 12 critical LSS CSFs, categorized into workers, business, and management, each influencing LSS implementation. Recommendations include creating a supportive environment, providing comprehensive training, and prioritizing continuous improvement efforts for successful LSS deployment. Future research possibilities include longitudinal studies, sector-specific analyses, and qualitative investigations to deepen understanding and enhance LSS implementation outcomes. In conclusion, successful LSS implementation empowers Nigerian organizations with improved productivity, waste reduction, and sustainable production systems, leading to overall growth and success.

The probability distribution of the interevent time between two successive earthquakes has been subject of numerous studies due to its key role in seismic hazard assessment. In recent decades, many distributions have been considered and there has been a long debate about the possible universality of the shape of this distribution when the interevent times are suitably rescaled. In this work we aim to find out if there is a link between the different phases of a seismic cycle and the variations in the distribution that best fits the interevent times. To do this, we consider the seismic activity related to the Mw 6.1 L’Aquila earthquake that occurred on April 6, 2009 in central Italy by analyzing the sequence of events recorded from April 2005 to July 2009, and then the seismic activity linked to the sequence of the Amatrice-Norcia earthquakes of Mw 6 and 6.5 respectively and recorded in the period from January 2009 to June 2018. We take into account some of the most studied distributions in the literature: q-exponential, q-generalized gamma, gamma and exponential distributions and, according to the Bayesian paradigm, we compare the value of their posterior marginal likelihood in shifting time windows with a fixed number of data. The results suggest that the distribution providing the best performance changes over time and its variations may be associated with different phases of the seismic crisis.

We investigate the production of an isolated attosecond pulse (IAP) via the phase-matching gating of high-harmonic generation by intense laser pulses. Our study is based on the integration of the propagation equation for the fundamental and generated fields with nonlinear polarisation found via the numerical solution of the time-dependent Schr\"odinger equation. We study the XUV energy as a function of the propagation distance (or the medium density) and find that the onset of the IAP production corresponds to the change from linear to quadratic dependence of this energy on the propagation distance (or density). Finally, we show that the upper limit of the fundamental pulse duration for which the IAP generation is feasible is defined by the temporal spreading of the fundamental pulse during the propagation. This nonlinear spreading is defined by the difference of the group velocities for the neutral and photoionised medium.

Radiologists refer to any area of cerebral parenchymal loss with or without surrounding gliosis as encephalomalacia. This archaic phrase, which literally translates to "softening of the brain" due to liquefactive necrosis, was coined by pathologists to describe the macroscopic appearance of the brain following a variety of traumas, such as cerebral infarction. The final outcome of brain parenchymal liquefactive necrosis after insult, which typically happens after cerebral ischemia, cerebral infection, hemorrhage, traumatic brain damage, surgery, or other insults. Gliosis, or the growth of glial cells in reaction to injury, is frequently seen around it. The location, size, and number of the lesions as well as the existence of other issues like seizures, hydrocephalus, or infection affect the symptoms and prognosis of encephalomalacia. While some people might not have any symptoms, others might have neurological abnormalities such hemiparesis, aphasia, cognitive decline, or behavioral changes. Depending on the underlying reason and the severity of the problem, treatment options may include medication, surgery, or rehabilitation. This is a case of a young male who reported for rehabilitation his left upper limb weakness, upon investigations Encephalomalacia was diagnosed.

The efficient recognition and classification of personal protective equipment are essential for en-suring the safety of personnel in complex industrial settings. Using the existing methods, manually performing macro-level classification and identification of personnel in intricate spheres is tedious, time-consuming, and inefficient. The availability of several artificial intelligence models in recent times presents a new paradigm shift in object classification and tracking in complex settings. In this study, several compact and efficient deep learning model architectures are explored, and a new efficient model is constructed by fusing the learning capabilities of the individual, efficient models for better object feature learning and optimal inferencing. The new model construct follows the contributory learning theory whereby each fussed model brings its learned features, which are then combined to obtain a more accurate and rapid model using normalized quantization-aware learning. During the investigation, a separable convolutional driven model was constructed as a base model, and then the various efficient architectures combined for the rapid identification and classification of the various hardhat classes used in complex industrial settings. A remarkable rapid classification and accuracy were recorded with the new resultant model.

. The impedance change of an induction coil surrounding a metal tube adapter is investigated by the truncated region eigenfunction expansion (TREE) method. Conventional TREE method is inapplicable to this problem as a consequence of the numerical overflow of eigenfunctions of the air-metal multi-subdomain regions. The difficulty is surmounted by a normalization procedure for the numerical eigenfunctions obtained from the finite element method (FEM). Efficient algorithm is devised by the Clenshaw-Curtis quadrature rule for integrals involving the numerical eigenfunctions. Numerical results of the TREE and FEM simulation coincide very well in all cases, and the efficiency of the proposed method is also confirmed.

As digital technology has become an integral part of urban’s daily operations; the urban landscape is constantly evolving with the needs of its society. This new reality allowed Municipalities to exert a higher influence in the national and local economy. Through deliberate planning and executing initiatives, they can ignite the local financial ecosystem to growth. In line with this, the paper aims to understand the possibilities available to the Greek Municipalities to exploit the smart city benefits to foster economic development. It is essential to understand the role of different factors including the strategy during the planning and implementing phases of initiatives concerning economy and innovation in a smart city. To achieve this, a tailor-made questionnaire and advanced statistical techniques are applied. The main findings highlight the importance to plan initiatives aligned with the needs of the municipality and the business environment. The existence of a smart city strategy has a catalytic effect on the final impact of the implemented initiatives on the urban environment. A systematic analysis of the smart cities’ dynamics and the new state of the urban environment can help the local actors focus on the value creation and public service provision, fostering innovation and profitability.

A full potential all-electron density functional method within generalized gradient approximation is used to investigate the electronic, elastic and transport properties of cubic copper sulphide and copper selenide. The electronic structure suggests metallic behavior with a zero energy band gap for both materials. Elastic property calculations suggest a stiff material with the bulk to shear modulus ratio of 0.35 and 0.44 for Cu2S and Cu2Se respectively. The transport properties were estimated using the Boltzmann transport approach. Seebeck coefficient, electrical conductivity, thermal conductivity, and power factor all suggest a potential p-type conductivity for Cu2S and n-type conductivity for Cu2Se.

Telemedicine, telehealth, e-Health, and other related terms refer to the exchange of medical information or medical care from one site to another through electronic communication between a patient and healthcare provider. As telemedicine infrastructure has changed since the COVID-19 pandemic, this review provides an overview of telemedicine use and effectiveness in cardiology, with emphasis on the post-pandemic context. Pre-pandemic studies tend to report statistically insignificant or modest improvements in cardiovascular disease outcome from telemedicine use to usual care. By contrast, post-pandemic studies tend to report positive outcomes or comparable acceptance of telemedicine use to usual care. Today, telemedicine can effectively replace in person follow-ups to produce comparable (but not necessarily superior) outcomes in cardiovascular disease management. A major benefit of telemedicine is the significant reduction in follow-up time or time-to-intervention which may lead to earlier detection and prevention of adverse events. Nonetheless, there remain barriers to effective telemedicine implementation in the post-pandemic context. Providing accuracy and ease-of-use of telemedicine devices, ensuring adherence to remote rehabilitation procedures, and implementing widespread telemedicine infrastructure are such examples. Current knowledge gaps include the true economic cost of telemedicine infrastructure, feasibility of use in specific cardiology contexts, and sex/gender differences of health outcomes through telemedicine use. Future telemedicine developments will need to address these concerns to achieve widespread acceptance as the new standard of care.

The composition and pattern of ecosystems are important factors determining the overall status and spatial differences of ecosystem service functions. However, under the background of differential land policies and ecological protection policies, research on the trend of ecological system pattern changes in the Fenhe River Basin is insufficient. Taking the upper and middle reaches of the Fenhe River Basin as the study area, based on long-term NDVI index and multi-period LUCC remote sensing images, this study used spatial statistics and time trend analysis methods to analyze the spatio-temporal dynamic changes of vegetation, land use, landscape pattern, and explored the impact of major driving factors on ecosystem changes. The results show that: (1) From 2010 to 2020, the vegetation cover in the upper and middle reaches of the Fenhe River Basin increased, with an annual NDVI increment of 0.003 (P<0.001). NDVI showed an increasing trend spatially, with significant statistics (P<0.001) and significant changes (P<0.05) in vegetation in high-altitude mountain areas, and the vegetation cover was mostly forests or grasslands. There was no significant change in vegetation cover in the low-lying urban agglomeration area. (2) From 2010 to 2020, the area of water bodies or wetlands in the study area significantly decreased, with 51.3% converted to arable land and 33.9% transferred to construction land, while only 2.2% remained as water bodies or wetlands. From 2015 to 2020, the trend of water body changes slowed down, with the proportions of conversion to arable land and construction land being 44.0% and 18.4% respectively, while the area of wetlands or water bodies remained at 16.3%. During the period of 2015-2020, the area of water bodies or wetlands converted to other land types increased by more than 14% compared to 2010-2015. This proportion reached more than 30% compared to the 13th Five-year Plan Period. (3) From 2010 to 2020, the spatial changes of landscape diversity (SHDI) and evenness (SHEI) of LUCC showed heterogeneous characteristics. In the high-altitude areas near the river basin boundary, the values of SHDI and SHEI were below 1.0. While in the low-altitude plain areas and urban areas with relatively frequent human activities, the values of SHDI and SHEI were above 1.0, and the values in urban areas could reach above 1.5. The evolution of ecosystem patterns in the upper and middle reaches of the Fenhe River Basin in the past decade has been clarified, providing a scientific basis for the construction and management of ecological environment governance and restoration projects in the Fenhe River Basin, and providing practical references for ecological protection and high-quality development practice in the Yellow River Basin.

In order to create a smart mine, it is necessary to digitize the existing emulsion pumping station. Existing research does not achieve this task, this paper designs and manufactures a high-pressure, high-flow, high-water-based mining digital controlled unloading valve (abbreviated as HLHMDCUV), which achieves good results in both theoretical analysis and experimental testing. In order to obtain the accurate dynamic characteristics, this valve was analyzed by simulation using AMESim. Based on the dynamic performance analysis and the flow field analysis inside the valve body, the structure has been optimized to improve the performance of HLHMDCUV. The results show that the HLHMDCUV has a better dynamic characteristics, which were also demonstrated in the experiment. At the same time, the HLHMDCUV is easy to disassemble and maintain. This paper provides a theoretical basis for the design of such valves, which is conducive to the subsequent promotion of intelligent mine transformation.

Recent studies suggest that PEBP1/RKIP and YY1, despite having distinct molecular functions, may interact and mutually influence one another's activity. They exhibit reciprocal control over each other's expression through regulatory loops, prompting the hypothesis that their interplay could be pivotal in cancer advancement and resistance to drugs. To delve into this interplay's functional characteristics, we conducted a comprehensive analysis using bioinformatics tools across a range of cancers. Our results confirm the association between elevated YY1 mRNA levels and varying survival outcomes in diverse tumors. Furthermore, we observed differing degrees of inhibitory or stimulatory effects of these two genes in various cancer pathways, along with correlations between their mRNA expression and immune infiltration. Additionally, YY1/PEBP1 expression (or methylation) displayed connections with genomic alterations across cancer types. Notably, we uncovered links between YY1/PEBP1 and different indicators of immunosuppression, such as immune checkpoint blockade response, and T-cell dysfunction/exclusion levels, across different patient groups. Overall, our findings underscore the significant role of the interplay between YY1 and PEBP1 in cancer progression, influencing genomic changes, tumor immunity or the tumor microenvironment. Additionally, these two gene products appear to impact the sensitivity of anticancer drugs, opening new avenues for cancer therapy.

In this study, a novel two-layer control scheme aimed at enhancing the dynamic performance of a nonlinear vehicle through the utilization of an optimal control approach grounded in predictive control principles is presented. The first layer of our control system focuses on the computation of an optimized rotational torque that ensures lateral dynamic stability. This torque is subsequently translated into differential forces acting on the wheels, employing the inverse tire model to derive the desired longitudinal slips. These slip values are then transmitted to the second layer of our control system. In the second layer, the electric motors associated with the vehicle's wheels dynamically adjust the input torque to accurately track the desired slip, thereby ensuring the overall stability of the electric vehicle. In view of the paramount importance of energy consumption in electric vehicles, we adopt optimal control strategies to substantially minimize battery utilization. To this end, careful selection of appropriate weighting coefficients in the control laws enables us to maintain the electric motors within their permissible operational range while simultaneously minimizing battery energy consumption for desired slip tracking. Extensive simulation results validate the effectiveness of our proposed control system in proficiently managing nonlinear effects and safeguarding the vehicle's stability.

Drought is one of the leading abiotic factors limiting morphological and physiological activities in blackberry cultivation. We investigated the effect of silver nanoparticles (AgNPs) on morphological and physiological processes in the boysenberry crop (Rubus ursinus Chamisso &amp; Schlenhtendal) under drought stress. The experiment was performed with three drought stress levels (0% PEG, 4% PEG and 8% PEG) and three AgNPs treatments (0, 0.1, 0.2 mg L−1) invitro conditions. The results showed that drought stress induced by PEG, reduced root and shoot development of boysenberry plants grown invitro. The addition of AgNPs is significantly alleviated the adverse effect of drought stress and increased the plant growth parameters. Antioxidant activity of SOD and CAT enzymes increased in boysenberry leaves when treated with AgNPs under drought conditions, while the amount of MDA decreased. Therefore, the results obtained in this study suggest that 0.1 mg L-1 AgNPs added to the medium improve the growth and development of invitro boysenberry plants under drought stress.

"Metaverse" as a term came to the fore in 2021 when Facebook rebranded its corporate identity to Meta, and signaled its intention to invest at least $10 billion in developing the concepts and related products that year. However, there is still little consensus in defining what constitutes the metaverse, although there is a widespread, though not universal, agreement that it will bring a wide range of benefits across society. More specifically, the advent, and continuing evolution, of the metaverse has strategic and operational implications for, and impacts on, industry and business at large. Adopting an inductive, interpretivist approach, this exploratory research article presents case examples of the guidance on the responsible development of the metaverse provided by two IT business services companies. The article identifies the major risks and responsibilities associated with the metaverse and assesses how companies might address these responsibilities. Very little research has been published in this area and this article attempts to make a small contribution to filling this gap in the literature. The article finds that responsibilities are largely in line with those currently associated with corporate digital responsibility, and concludes that the strategic impact and extent of regulatory change will depend on the nature of the metaverse that materialises in the forthcoming decade.

Keywords: iron deficiency anemia; IDA; anemia; knowledge; awareness.

The intricate relationship between physical and social environments within organizations plays a pivotal role in shaping sustainable innovation endeavors. This paper presents a comprehensive analysis of two key dynamics that have garnered substantial scholarly attention for promoting sustainable innovation: the physical environment and the organizational climate. To elucidate the intricate interplay between these dynamics, we propose a novel three-dimensional framework that guides the modeling of the intricate processes through which the physical environment and innovation climate synergistically influence innovation outcomes. Building on this framework, we delve into an in-depth literature review concerning physical environments that exert a significant impact on innovation. Through this review, we identify and elaborate on four pivotal elements of the physical environment: communality, personalization, comfort, and healthiness. Leveraging insights gleaned from this review, we outline two promising avenues for future research in the realm of the physical environment's interaction with the innovation climate. Furthermore, we underscore the critical importance of adopting an interdisciplinary approach that seamlessly integrates insights from both the physical and social domains to comprehensively understand the sustainable innovation landscape.

In a rapidly evolving global landscape characterized by increased international travel, migration, and ecological shifts, this study sheds light on the emergence of protozoal and helminthic infections targeting the central nervous system (CNS) within Europe. Despite being traditionally associated with tropical regions, these infections are progressively becoming more prevalent in non-endemic areas. By scrutinizing the inherent risks, potential outcomes, and attendant challenges, this study underscores the intricate interplay between diagnostic limitations, susceptibility of specific population subsets, and the profound influence of climate fluctuations. The contemporary interconnectedness of societies serves as a conduit for the introduction and establishment of these infections, warranting comprehensive assessment. This study emphasizes the pivotal role of heightened clinician vigilance, judicious public health interventions, and synergistic research collaborations to mitigate the potential consequences of these infections. Though rare, their profound impact on morbidity and mortality underscores the collective urgency required to safeguard the neurological well-being of the European populace. Through this multifaceted approach, Europe can effectively navigate the complex terrain posed by these emergent infections.

Na⁺/H⁺ exchangers (NHEs) are known to be important regulators of pH in multiple intracellular compartments of eukaryotic cells. Sperm function is especially dependent on changes in pH and thus it has been postulated that NHEs play important roles in regulating the intracellular pH of these cells. For example, in order to achieve fertilization, mature sperm must maintain a basal pH in the male reproductive tract and then alkalize in response to specific signals in the female reproductive tract during the capacitation process. Eight NHE isoforms are expressed in mammalian testis/sperm: NHE1, NHE3, NHE5, NHE8, NHA1, NHA2, NHE10, and NHE11. These NHE isoforms are expressed at varying times during spermatogenesis and localize to different subcellular structures in developing and mature sperm where they contribute to multiple aspects of sperm physiology and male fertility including proper sperm development/morphogenesis, motility, capacitation, and the acrosome reaction. Previous work has provided evidence for NHE3, NHE8, NHA1, NHA2, and NHE10 being critical for male fertility in mice and NHE10 has recently been shown to be essential for male fertility in humans. In this article we review what is known about each NHE isoform expressed in mammalian sperm and discuss the physiological significance of each NHE isoform with respect to male fertility.

Remote sensing methods have the potential to improve lake water quality monitoring and deci-sion-making in water management. This reviews introduces novel findings in the field of opti-cally active water quality parameters using remote sensing. It summarizes existing retrieval methods (analytical, semi-analytical, empirical, semi-empirical, and artificial intelli-gence/machine learning (AI/ML)), examines measurement methods used to determine concen-tration of specific water quality parameters, summarizes satellite systems that enable temporal data for understanding the state of the lake with focus on water quality parameters, and pro-poses enhancements for future research of lake water quality using remote sensing. As part of this review, eight optically active biological and physical water quality parameters were ana-lyzed, including chlorophyll-α (chl-α), transparency (Secchi disk depth (SDD)), colored dis-solved organic matters (CDOM), turbidity (TUR), electrical conductivity (EC), surface salinity (SS), total suspended matter (TSM), and water temperature (WT). The research proposes a shift from point-based data representation to a more reliable raster representation and encourages optimizing grid selection for in situ measurements by combining hydrodynamic model with re-mote sensing methods. This review presents a comprehensive summary of the bands, band combinations, and band equations per sensor for eight optically active water quality parameters as listed in Tables A1-A8. The review’s findings indicate that use of remotely sensed data is an effective method for estimating water quality parameters in lakes, with a significant increase in global utilization. The review highlights potential solutions and limitations to the challenges of remote sensing water quality determination in lakes.

Reconstructing the Tree of Life remains a central goal in biology. Early methods, relying on small numbers of morphological or genetic characters, often yielded conflicting evolutionary histories, undermining confidence in the results. Investigations based on phylogenomics, which use hundreds to thousands of loci for phylogenetic inquiry, have provided a clearer picture of life's history, but certain branches remain problematic. To resolve difficult nodes on the Tree of Life, two recent studies tested the utility of synteny, the conserved collinearity of orthologous genetic loci in two or more organisms, for phylogenetics. Synteny exhibits compelling phylogenomic potential while also raising new challenges. We identify and discuss specific opportunities and challenges that bear on the value of synteny data and other rare genomic changes for phylogenomic studies. Synteny-based analyses of highly contiguous genome assemblies mark a new chapter in the phylogenomic era and the quest to reconstruct the Tree of Life.

The advent of remote work has ushered in a new era of economic transformation, redefining the dynamics of local economies, and unleashing the multiplier effect on a national scale. This abstract explores the profound implications of remote work on local economies, dissecting how the multiplier effect operates within a nation's economic landscape. The multiplier effect is a fundamental economic concept that highlights how changes in spending and investment can create a ripple effect, leading to a magnified impact on an economy. This concept gains new significance in the context of remote work, as it triggers a chain reaction of economic activities that radiate from remote workers to their local communities. The increased flexibility and reduced geographical constraints of remote work have reshaped the allocation of resources. The continued reliance on remote work may lead to a reduction in demand for commercial real estate in urban centers, necessitating adaptive urban planning strategies. In conclusion, the rise of remote work has initiated a transformative era for local economies, driven by the multiplier effect. By amplifying the impacts of spending and investment, remote work fosters job diversification, innovation, and infrastructure development within communities. As remote work continues to reshape the landscape of work and life, understanding and harnessing its multiplier effect remains paramount for policymakers, businesses, and local communities alike. The multiplier effect is a concept in economics that illustrates how changes in spending can lead to larger impacts on a nation's economy through a chain reaction of economic activities. It demonstrates that an initial injection of spending, whether from government expenditure, investment, or consumption, doesn't just have a one-time impact. Instead, it sets off a series of interconnected spending and income-generation processes that result in a larger overall increase in economic activity. t's important to note that the multiplier effect can work in reverse as well. If there's a decrease in spending, it can lead to a decrease in economic activity and income through the same chain reaction process. This concept highlights the interconnected nature of economic activities and emphasizes the significance of changes in spending patterns on a nation's overall economic health. The magnitude of the multiplier effect is influenced by factors such as the marginal propensity to consume (the proportion of additional income that households spend), leakages (savings and taxes that reduce the multiplier effect), and the extent to which additional spending creates additional production capacity within the economy. Understanding the multiplier effect is essential for policymakers, as it helps them gauge the potential impacts of changes in fiscal and monetary policies on the economy.

The feasibility of using zeolites, synthesized from components found in municipal solid waste fly ash (MSW-FA), as sorbents for the recovery of nutrients (nitrate and phosphate) and heavy metals is critically assessed in this review. The inherent drawbacks of utilising a highly contaminated, variable, and relatively Al- and Si-dilute source such as MSW-FA to synthesize zeolites are discussed, and different methods to extract and decontaminate zeolite precursor materials from MSW-FA are considered. Ways to synthesize tailored zeolites and how their properties as well as the operational conditions impact the adsorption of cations such as ammonium and heavy metals are summarized. The use of surface-modified zeolites to adsorb nitrate and phosphate is also reviewed. And subsequently, approaches to utilise directly or recover for reuse the adsorbed compounds are considered, discussing potential challenges and mitigating measures related to leaching of unwanted compounds from the zeolites. Moreover, the possibility to regenerate the adsorption capacity of the zeolites for multiple adsorption cycles is considered. In the final chapter of the review a more general discussion of the main challenges and existing research gaps is provided, giving directions for recommended studies.

This paper introduces the spatial component in cross-section econometric estimations and specifically, the spatial dependence effect inherent in some of the variables involved in the modelling process. First, the spatial structure of the data from thematic maps is observed and Moran's spatial autocorrelation indicators are presented. Subsequently, the spatial weights matrix is built under different specifications. Finally, several modelling specification strategies are shown and the interpretation of the estimated coefficients. The theoretical concepts are illustrated with examples and their corresponding R software codes. This code and databases are available in a freely accessible repository in the BE2SHARE-EUDAT platform so that they can be easily reproduced.

Generally, mineral fillers are added to thermoplastic polymers to reduce cost and improve performance. However, properly selected mineral fillers can also improve thermal conductivity and deformation behavior, shrinkage, impact strength, dimensional stability, and molding cycle time in thermoset polymers. This study focused on the preparation and microscopic and spectroscopic characterization of various hybrid composites using pumice as primary filler and gypsum, kaolin and hollow glass sphere as secondary fillers, as well as examining some of their mechanical properties and thermal conductivities. For this, first of all, surface modification of the clay was carried out by intercalation method from solution using raw Montmorillonite, cationic surfactant and long chain hydrocarbon material, and then organo-clay melamine formaldehyde nanocomposite was prepared by in situ synthesis using organo clay and melamine formaldehyde pre-polymer. Finally, non-ionic surfactant, foaming agent and glycerin were added to the prepared nano-composite at approximately 90°C, mixed mechanically and then pumice was added. The processes at this stage were repeated while preparing hybrid composites with pumice and other mineral additives. For curing and molding, the composite was first subjected to microwave irradiation for 5 minutes followed by thermal treatment at 140°C for 60 min. Fourier transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRD) spectra and Scanning electron microscope (SEM) and High resolution transmission electron microscope (HRTEM) images were taken for morphological and textural characterization for raw clay (MMT), organo clay (OMMT) and pure polymer with prepared hybrid composites. In addition, some mechanical properties such as bending strength, elasticity modulus and screw holding resistance, as well as thermal conductivity coefficients of the hybrid composites were determined according to the relevant standards and the obtained results were evaluated. Spectroscopic and microscopic analyzes have shown that effective adhesion interactions occur between polymer-clay nanocomposite particles and filler grains, thus resulting in textural arrangements with different properties. Mechanical and thermal conductivity test results showed that melamine formaldehyde-organo-clay nano composite foam and hybrid composite containing hollow glass sphere are highly qualified materials in terms of thermal insulation and mechanical strength.

Managing sidelobe levels (SLLs) in metasurface-driven beam-steering antennas poses a significant challenge due to intrinsic factors leading to grating lobes. Our proposed method employs an equivalent model to optimize large periodic metasurfaces efficiently. This model predicts complete metasurface performance, accounting for mutual coupling between patches. We introduce an evolutionary optimization algorithm based on the Cross Entropy (CE) method to enhance PGM-based beam-steering antennas and suppress sidelobes. Two strategies were employed: first is to optimize the patch dimensions for a sidelobe-free pattern and the second is to maintain the PGM dimensions while optimizing feed array amplitudes. Both strategies effectively suppressed sidelobes, offering insights into the CE method's applicability and effectiveness for CPU-intensive electromagnetic optimization challenges. The proposed CE method variant retains its simplicity while improving monitoring capabilities, addressing this limitation. Smaller generations yield better improvements per evaluation

Neutral beam injection (NBI) is used for thermonuclear plasma heating, non-inductive current drive, rotation, operation scenario control, and for plasma diagnostics in nuclear fusion devices. NBI is the main source of fast particles in plasma which transmit energy to thermal plasma during their slow-down. Steady-state tokamak operation is only possible when the sub-thermal particles energy is absorbed and effectively confined in plasma volume. While NBI purposes and applications vary through different fusion systems, the engineering tasks performed during research and development (R&D) stage of neutral beamline design have much in common. The NBI studies, especially addressing long pulse and high-power operation typically include a beam transmission analysis and power loads distribution at the structural components of the beamline. Thermo-structural analysis is applied next to heat removal circuits design. ‘Beam Transmission’ (BTR) code is a dedicated tool, developed by a physicist and used by NBI physicists and engineers. BTR was created and 1^st applied during R&D phase of the world’s largest tokamak ITER. BTR code is intended for public usage and routinely applied for detailed simulations of neutral beam propagation through complex beamlines. BTR is flexible and intuitive in input, user-friendly and fully interactive. Thanks to visualization and high performance BTR looks and feels like a real NB flight simulator. Despite BTR ‘mature’ age, the code is still in evolution. Support is available to all new BTR users.

Various methods including electrochemical purification, chemical precipitation, solvent extraction, and ion-exchange resins, have maturely been used for removal of copper from nickel anolyte. Interestingly, these approaches of copper removal from nickel anolyte by precipitation are well used as the primary industrial method in nickel production again. However, these methods suffer from several severe drawbacks in industrial practices. One is that a small amount of nickel precipitates with copper in slags，resulting in slag treatment difficulties. Second, this process requires an extremely high activity of the sulfide-based copper removal agents which results in high production costs; the short storage period of the copper removal agent is another drawback of this method. These have been the key challenges in the smelting process of nickel. Herein, we present a comprehensive review of the nickel removal methods used for nickel anolyte purification, electrochemical purification, chemical precipitation, solvent extraction, and ionexchange resins. The advantages and feasibilities of each technique in industrial applications are also explored and analyzed. Finally, we demonstrate that ion-exchange resin-based extraction method can pave a new path for metallurgical research on nickel.

Intergenerational integration has given rise to a novel aging paradigm known as all-age communities, which is garnering international attention. In China, the aging population and the implementation of the three-child policy have resulted in increased demand for retirement and childcare services among residents in older neighborhoods. Consequently, there is a pressing need to retrofit these older neighborhoods to accommodate all-age living arrangements given the high demand they generate. Therefore, this study undertakes research interviews with residents and constructs an exploratory theoretical model rooted in established theory. To assess the significance of our model, we employ Smart PLS 3.0 based on 297 empirical data points. Our findings indicate that anxiety has a significant negative effect on payment behavior; objective perception, willingness to pay, and government assistance exert significant positive effects on payment behavior. By comprehensively analyzing the mechanisms underlying residents’ payment behavior, this study provides valuable insights to the government for promoting the aging process within communities and formulating effective transformation policies.

We compare the well known Rayleigh-Ritz variational method (RRVM) with a recently proposed approach based on supersymmetric quantum mechanics and the Gram-Schmidt orthogonalization method (SSQMGS). We apply both procedures to a particular class of double-well harmonic oscillators that had been conveniently chosen for the application of the latter approach. The RRVM eigenvalues converge smoothly from above providing much more accurate results with less computational effort. Present results show that the unproved SSQMGS upper bounds do not hold.

With an increasing concern for global warming, there have been many attempts to reduce greenhouse gas emissions. About 30 % of total energy has been consumed by buildings and much attention has been paid to reducing building energy consumption. While there are many ways of reducing building energy consumption, accurate energy consumption prediction becomes more significant. As mechanical systems are the most energy-consuming components in the building, the present study developed the energy consumption prediction model for a direct-fired absorption chiller by using the ANN technique for the short term. The ANN model was optimized and validated with the actual data collected through a BAS. For the optimization, the numbers of input variables and neurons, and the data size of training were applied. By changing these parameters, the predictive performance was analyzed. In sum, the outcome of the present study can used to predict the energy consumption of the chiller as well as improve the efficiency of the energy management. The outcome of the present study can be used to develop a more accurate prediction model with a few datasets in that it can improve the efficiency of building energy management.

The development of artificial intelligence systems assumes that a machine can independently generate an algorithm of actions or a control system to solve the tasks. To do this, the machine must have a formal description of the problem and possess computational methods for solving it. The article deals with the problem of optimal control, which is the main task in the development of control systems, insofar as all systems being developed must be optimal from the point of view of a certain criterion. However, there are certain difficulties in implementing the resulting optimal control modes. The paper considers an extended formulation of the optimal control problem, which implies the creation of such systems that would have the necessary properties for its practical implementation. To solve it, an adaptive synthesized optimal control approach based on the use of numerical methods of machine learning is proposed. The method moves the control object, optimally changing the position of the stable equilibrium point in the presence of some initial position uncertainty. As a result, from all possible synthesized controls, he chooses one that is less sensitive to changes in the initial states. As an example, the optimal control problem of quadcopter with complex phase constraints is considered. To solve this problem? according to the proposed approach, the control synthesis problem is firstly solved to obtain a stable equilibrium point in the state space by a machine learning method of symbolic regression. After that optimal positions of the stable equilibrium point are searched according to source functional from the optimal control problem by particle swarm optimization algorithm. It is shown that such approach allows generating the control system automatically by computer basing on the formal statement of the problem and then directly implementing it onboard as far as they have already had a stabilization system inserted.

Horseshoe crabs represent the most ancestral chelicerate lineage characterized by marine ecology and the possession of lateral compound eyes. While considered living fossils, recent studies reported an unusual number of Pax6 transcription factor genes in the Atlantic horseshoe crab Limulus polyphemus. Pax genes encode a family of ancient metazoan transcription factors, which comprise seven subfamilies. Among these, the members of the Pax6 subfamily confer critical functions in the development of the head, the visual system, and further body plan components. Arthropods are characterized by two Pax6 subfamily homologs that were discovered in Drosophila and named eyeless (ey) and twin of eyeless (toy). However, whole genome sequence searches uncovered three homologs of ey and two homologs of toy in L. polyphemus. These numbers are explained by the occurrence of three whole genome duplications (WGD) in the lineage to the last common ancestor of L. polyphemus and its closely related three additional members of the extant horseshoe crab species cluster. Here we report comparative sequence evidence for the functional conservation of the five L. polyphemus Pax6 transcription factor homologs. Our analyses reveal that all paralogs are conserved in the approximately 135 million-year-old horseshoe crab species cluster and that they evolve under strong purifying selection. These findings identify subfunctionalization as the likeliest post-WGD outcome for the five Pax6 homologs. While awaiting confirmation by gene expression studies, this scenario would reconcile the discrepancy between the WGD-expanded gene repertoires and phenotypic stasis in the horseshoe crabs.

Comprehensive studies into the various causes of this ubiquitous disease have been prompted by the worldwide increase in cancer incidence. There are many potential causes of cancer, but environmental factors are of particular concern now. This abstract explores the complex link between environmental factors and the growing cancer epidemic, shedding light on the role that our immediate environment plays in the emergence of cancers. The environment can contain carcinogenic agents that gradually influence the course of cancer, including air pollutants, water contaminants, workplace exposures, and industrial activities. The ways through which environmental carcinogens may cause DNA damage and unchecked cell proliferation are discussed in this abstract. Environmental justice and the moral necessity to reduce inequities in exposure and health effects are highlighted to underline the disproportionate impact on vulnerable groups. The study presented here highlights the need for preemptive action to reduce environmental risks. Society can reduce the hidden threat posed by environmental carcinogens through strict legislation, sustainable practices, and community-driven initiatives. In order to lessen the cancer burden and secure a healthier future for all, the authors of this abstract argue that there must be a concerted effort to create surroundings that promote health and well-being.

The main aim of this study is to examine the effects of Total Quality Management (TQM) practices (leadership of management, decision making, continuous improvement, customer focus, employee involvement, process management and relations with suppliers) on the financial and operational performance of hospitals in service industry. The data of the study were collected by the questionnaire prepared in the light of published studies and the suggestions of medical and administrative staff. Medical and administrative staff were chosen as target participants that reflect perspectives of hospitals. 1069 questionnaires were answered in 6 private and 26 public hospitals in the Marmara region in Turkey. The results claim that “customer focus” affects both operational performance as well as the financial performance of hospitals more than other TQM practices. While “process management” and “customer focus” explain the variance of financial performance significantly. “Process management” does not explain variance of operational performance.

Owing to the upsurge in the number of endangered species and understanding animal patterns in general as well as population demographics; the monitoring of wildlife species is an essential for the conservation and safety of animals. In order to organize and manage the reserves, the nature bequeaths to us, we need to have hands-on information of their population and food trends, conditions where they survive and other species in the ecosystem. The paper presents a vision-based approach to monitor wildlife using an aerial platform. A quad-rotor based aerial platform is used for the very first time for this purpose. Field imaging is done using a digital cellphone camera mounted on the platform to acquire video of horses in the field. Two techniques, Lucas-Kanade and Horn-Schunck methods are applied on the acquired set of images and the results are compared. Noise due to fluctuations and light conditions are minimized using Gaussian and HSV filters. Experiments show results with an absolute mean difference of 2.84 pixels and 8.50 pixels for changes in X and Y directions respectively for the two approaches.

PDMS samples may be used in various microfluidic applications by hydrophilizing their surfaces. This study examines the effects of air plasma jet (APJ) and dielectric barrier discharge (DBD) plasma on the surface hydrophilicity of polydimethylsiloxane. In order to increase the hydrophilicity of PDMS sample surfaces, two plasma sources including APJ and DBD were compared. Both DBD and APJ setups were measured for voltage and current, and their respective power was calculated and compared based on their characteristics. It is important to note that the electrical specifications of APJ and DBD were identical, and the source power rates for APJ and DBD plasma were 306W and 300W respectively. UV-vis spectroscopy was used to characterize the plasma, and an electrical characterization of the plasma's power supply was carried out. The effects of parameters such as the distance from the nozzle tip, the duration of the process, and the source voltage on the hydrophilicity of the surfaces during the treatment by APJ were also examined, and samples were then examined for a period of time to determine whether surface hydrophilicity was preserved. On the PDMS surface, a contact angle of about 5.1° was observed using short-term plasma treatments of 10 seconds. In the same conditions, the effect of DBD treatment was superior to that of APJ treatment.

Image registration (IR) is a process that deforms images to align them with respect to a reference space, making it easier for medical practitioners to examine various medical images in a standardized reference frame, such as having the same rotation and scale. This document introduces image registration using a simple numeric example. It provides a definition of image registration along with a space-oriented symbolic representation. This review covers various aspects of image transformations, including affine, deformable, invertible, and bidirectional transformations, as well as medical image registration algorithms such as Voxelmorph, Demons, SyN, Iterative Closest Point, and SynthMorph. It also explores atlas-based registration and multistage image registration techniques, including coarse-fine and pyramid approaches. Furthermore, this survey paper discusses medical image registration taxonomies, datasets, evaluation measures, such as correlation-based metrics, segmentation-based metrics, processing time, and model size. It also explores applications in image-guided surgery, motion tracking, and tumor diagnosis. Finally, the document addresses future research directions, including the further development of transformers.

Brain-derived neurotrophic factor (BDNF) is a key molecule in promoting neurogenesis, dendritic and synaptic health, and neuronal survival, plasticity, and excitability, all of which are disrupted in neurological and cognitive disorders such as Alzheimer’s disease (AD). Extracellular aggregates of amyloid-β (Aβ) in the form of plaques and intracellular aggregates of hyperphosphorylated tau protein have been identified as major pathological insults in AD brain, along with immune dysfunction, oxidative stress, and other toxic stressors. Although aggregated Aβ and tau lead to decreased brain BDNF expression, early losses in BDNF prior to plaque and tangle formation may be due to other insults such as oxidative stress and contribute to early synaptic dysfunction. Physical exercise, on the other hand, protects synaptic and neuronal structure and function, with increased BDNF as a major mediator of exercise-induced enhancements in cognitive function. Here, we review recent literature on mechanisms behind exercise induced BDNF upregulation and its effects on improving learning and memory and on Alzheimer’s disease pathology. Mechanisms include elevations in peripheral BDNF-inducing hormones such as osteocalcin, FNDC5/irisin, and lactate. The fundamental mechanisms of how exercise impacts BDNF and cognition are unclear but are a prerequisite to developing new biomarkers and therapies to delay or prevent cognitive decline.

This research paper aims to unveil the splendor of the diverse architectural heritage of Lahore, one of the most culturally, ethnically and traditionally rich cities in the Indian subcontinent. Lahore is renowned for its Mughal-era grandeurs, British monuments and historic architecture which is meticulously embellished by a unique amalgamation of Islamic, Persian, and Indian architectural styles. The paper discusses some of the most significant historical buildings in Lahore, including the Lahore Fort, Shalimar Gardens, and traces their architectural evolution over time.The research also highlights the unprecedented challenges faced by Lahore’s architectural heritage in terms of preservation and its potential by which Lahore could emerge as a tourist attractive city. Due to less proper maintenance, a plethora of Lahore’s historical buildings are deteriorating rapidly. The paper outlines some of the measures that could be taken by the government and NGOs to restore a myriad of these buildings, including the formation of conservation boards and the enforcement of strict laws.Through a detailed and thorough analysis of the structural heritage of Lahore, this research paper calls on the need for greater restoration awareness and appreciation of the city’s mesmerizing historical marvels. The paper concludes that while there are significant challenges in conserving Lahore’s architectural heritage, concerted efforts by the government and the individuals can aid to safeguard these treasures for future generations.

Plasma generation by means of electrical discharge requires specialized power supply systems. The applicability of plasma for various plasma processes depends on its parameters, and these in turn depend on the parameters of the power supply systems. Arc plasma can be unstable, generating a lot of electromagnetic interference and overvoltage and overcurrent. The power system of a plasma reactor must guarantee good plasma control characteristics, be immune to disturbances and ensure good cooperation with the power grid. The article analyzes the cooperation of a three-phase plasma reactor, with gliding arc discharge, with a power supply system of a new type. This system integrates an AC/DC/AC converter with a five-column transformer of special design in a single device. Using the properties of magnetic circuits, it was possible to integrate the functions of ignition and sustaining the burning of the discharge in the reactor in a single transformer. Proper design of the transformer is crucial to achieve good cooperation of the AC/DC/AC converter with both the plasma reactor and the power supply network. The presented power supply design shows a number of positive features predisposing it to powering arc plasma reactors.

This article explores how digitalisation is impacting the hospitality industry and assesses the evolving role of Information Technology (IT) strategy in the digitalisation process. The research approach is qualitative and inductive, based on six in-depth interviews with senior IT professionals in the hospitality industry. Findings indicate significant differences in the role of IT strategy in guiding digitalisation in the companies studied. The depth of information provided by the interviewees supports the development and application of a model that profiles the companies regarding their degree of digitalisation and technology integration. Analysis of interview material allows the identification of key properties for successful digitalization: process agility, workforce adaptability, and technology manageability, along with a clear data culture and ensured cybersecurity. However, disparate systems and technologies, and a lack of data integrity, are key issues that leave hospitality companies with difficult choices in progressing digitalisation initiatives. The applied model and identification of key properties for successful digitalisation contribute to the development of related theory and can also be used as a reference point for senior IT professionals working in the industry.

In the absence of a holistic view of Landscape Sustainability, credible data and consistent information are needed to help decision making and support adaptive management. However, consolidated tools (system of standards and controls) of assessment exist, but show a complexity of the references on one hand, and are mostly qualitative and environmental indicators based on the other hand. This review article deals with the theme of both environmental and landscape indicators in general, the principles and the fundamental definitions. The main models used, the prerequisites and various fields of application are also taken into consideration. Last but not least, various environmental and landscape indicators are presented and compared.

We obtain some generalised Minkowski-type integral formulas for compact Riemannian (resp. spacelike) hypersurfaces in Riemannian (resp. Lorentzian) manifolds admitting an arbitrary vector field that we assume to be timelike in the case where the ambient space is Lorentzian. Some of these formulas generalize existing formulas in the case of conformal and Killing vector fields. We apply these integral formulas to obtain interesting results concerning the characterization of such hypersurfaces in some particular cases such as when the ambient space is Einstein admitting an arbitrary (in particular, conformal or Killing) vector field, and when the hypersurface has constant mean curvature.

For autonomous driving, perception is a primary and essential element that fundamentally deals with the insight into the ego vehicle’s environment through sensors. Perception is a challenging task suffering from dynamic objects and continuous environmental changes. The issue gets worse due to interrupting the quality of perception by adverse weather like snow, rain, fog, night light, sand storm, strong daylight, etc. In this work, we have tried to improve camera-based perception accuracy, such as autonomous driving-related object detection in adverse weather. We proposed the improvement of YOLOv8-based object detection in adverse weather through transfer learning using merged data from various harsh weather datasets. Two prosperous open-source datasets (ACDC and DAWN) and their merged dataset were used to detect primary objects on the road in harsh weather. A set of training weights were collected from training on the individual datasets, their merged version, and several subsets of those datasets according to their characteristics. A comparison between the training weights also occurred by evaluating the detection performance on the above-mentioned datasets and their subsets. The evaluation revealed that using custom datasets for training significantly improves the detection performance compared to the YOLOv8 base weights. And using more images through the feature-related data merging technique steadily increases the object detection performance.

Motivated by results on the location of zeros of a complex polynomial with monotonicity conditions on the coefficients (such as the classical Eneström-Kakeya Theorem, and its recent generalizations), we impose similar conditions and give bounds on the number of zeros in certain regions. We do so by introducing a reversal in monotonicity conditions on the real and imaginary parts of the coefficients, and also on their moduli. The results presented naturally apply to certain classes of lacunary polynomials.

A remarkable strengths of deep neural networks lies in their ability to discover patterns and representations from complex data. Deep learning models can learn and refine features at different levels of abstraction, enabling them to handle complex tasks in computer vision recognition, natural language processing, and speech recognition. The ability to generalize from examples, coupled with the capacity to process vast amounts of data, empowers deep learning to achieve state-of-the-art results across a wide spectrum of applications. An argument for this ability is based on similarities between deep neural networks and the nervous system. In this report, we argue that despite the remarkable performance of deep learning, there are still gaps between deep learning and the nervous system that needs to be closed to enable deep learning doing tasks that currently only the nervous system can perform

Aluminum matrix nanocomposites have been the subject of much attention due to their extraordinary mechanical properties and thermal stability. This research focuses on producing and characterizing an aluminum matrix reinforced with silicon carbide (SiC) nanometric particles. The conventional powder metallurgy route was used to produce the nanocomposites, and the dispersion and mixing process was carried out by ultrasonication. The conditions of the dispersion and the volume fraction of the SiC were evaluated in the production of the nanocomposites. Microstructural characterization was carried out using optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and electron backscatter diffraction (EBSD). Mechanical characterization was carried out using hardness and tensile tests. The dispersion agent was investigated, and isopropanol leads to better dispersion with fewer agglomerates. Increasing the volume fraction of the reinforcement improves the hardness of the nanocomposites. However, greater agglomeration of the reinforcement is observed for larger volume fractions. The greatest increase in hardness (77% increase compared to the hardness of the Al matrix) is obtained with 1.0 vol % of SiC, corresponding to the sample with the best dispersion. The mechanical characterization through tensile tests attests to the effect of the reinforcement on the Al matrix. The main strengthening mechanisms identified were the load transfer, the texture hardening, Orowan strengthening, and the increase in the density of dislocations in the nanocomposites.

In the present study, linear novel polymer poly(1-(2-((3-amino-2-hydroxypropyl)amino)ethyl)-1'-ethyl-[4,4'-bipyridine]-1,1'-di-ium) (poly(AHAEBD)) and its complex with iron (ΙΙΙ) ([Fe(poly(AHAEBD)2].Na3) were synthesized and then their anticancer effects on A375 human malignant melanoma cells line were evaluated. The structure of the synthesized compounds was confirmed using Fourier transform infrared spectroscopy (FT-IR), nuclear magnetic resonance spectroscopy (1HNMR), field emission scanning electron microscopy (FE-SEM), X-ray energy diffraction analysis (EDS) and gel permeation chromatography (GPC). Also, the cytotoxicity of cisplatin as a reference, on A375 melanoma cell line was tested. The IC50 of polymer-complex [Fe(poly(AHAEBD)2].Na3 (0.71 µg/mL), cisplatin (4.58 µg/mL) and poly(AHAEBD) (1.73 µg/mL) were obtained. Our results revealed that the polymer-complex [Fe(poly(AHAEBD)2].Na3 exhibited better performance compared to cisplatin. Furthermore, the coordination with iron (III) enhanced the cytotoxicity levels of poly(AHAEBD). According to these findings, the synthesized polymer-complex demonstrates remarkable potential as an anti-cancer agent. This study could provide the basis for future research focused on employing this new polymer-complex for in vivo testing, highlighting its potential for therapeutic applications.

With worsening environmental degradation and increasing international demand for human health, plant cell based technology will be more important. The aim of this review is to give an overview regarding key points of current progress and development trend of nature medical and edible plants from the framework of whole plant cell engineering including cell cultures, cell fusion and cell splitting derived biotechnology. Here we sum up three main application trends of medical plants cell cultures covering industrial output, technology upgrading and potential resource development. We also provide classification and typification insights to summarize the development of somatic hybridization in cereal, vegetables crops and other medicinal and edible plants as well as application of artificial polyploidy induction in major medicinal herbs. Development medicinal and edible homologous plants based on modern plant cell engineering will bring us a promising future.

The zero-catch problem is a key issue in CPUE(Catch Per Unit Effort) standardization, and previous studies have treated all zero-catch data uniformly, but this actually loses some correctly-labeled samples. On the other hand, for the main catches with few zero-catch samples, the problem of low performance of fisheries forecasting remains unsolved even though the forecasting model structure is updating constantly, since we cannot know whether the samples are correctly recorded. In this paper, we propose a method based on confident learning theory to detect anomalous samples in the datasets and unify zero-catch and non-zero samples as noise through an overarching framework of learning with noisy labels, which reveals the heterogeneity among zero-catch samples (as well as among non-zero samples) and the homogeneity between zero-catch samples and non-zero samples. Using three species of tuna in the tropical Atlantic Ocean with the spatial resolution of 0.5 ◦ × 0.5 ◦ and time resolution of days from 2016 to 2019 as experimental material, performance on all three classical machine learning models(Random forest, Support Vector Machine and XGBoost) is significantly improved compared to each baseline.This confirms that we propose a self-adaptive, effective method for detecting and repairing anomalous samples in the fishery dataset.

Accretionary and collisional orogeny are often accompanied by the disturbance of the geothermal gradient, leading to high-temperature metamorphism. High-temperature metamorphic rocks are significant in their ability to help the reconstruction of the thermal histories of orogenic belts. The Tianshan Orogenic Belt, at the southwest margin of the Central Asian Orogenic Belt, is a record of the long-term subduction–collision–post-collision orogenic process that has taken place in the Phanerozoic Eon. Here, we report the discovery of mafic granulites in the Muzhaerte area, SW Tianshan. Petrographic observation reveals that the mafic granulites underwent two metamorphic stages. The peak mineral assemblages of the first stage are dominated by clinopyroxene + orthopyroxene + plagioclase + quartz + hornblende ± biotite, and the post-peak mineral assemblages of the second stage are dominated by clinopyroxene + plagioclase + quartz + amphibole + biotite. The calculated results obtained from the two-pyroxene thermobarometers and the Al-in-hornblende barometer for the mafic granulites indicate that the metamorphic conditions of mafic granulites are 760–860 ℃ and < 0.39–0.41 Gpa. The mafic granulites recorded a high-grade granulite facies thermal metamorphic event with the highest temperature limit currently recorded in the Central Tianshan Block.

Minimum housing standards aim to safeguard housing rights and enhance residential conditions. Governments develop housing policies, including provision, preservation, and support for welfare programs, guided by the status of households below these standards. Growing nations commonly utilize this approach to decrease the proportion of households not meeting these criteria. In South Korea, the ratio of households below these standards was 4.5% in 2021, down from 16.6% in 2006, as indicated by the initial Korea Housing Survey. However, this downward trend has stalled over the past decade. With the 2004 and 2011 revisions, the standards have been effective for 12 years, yet no longer mirror current housing realities due to ongoing improvements. This study aimed to propose enhancements to Korea’s minimum housing standards. Through analyzing laws, prior research, present household statuses, international cases, and expert insights, recommendations emerged. Categorizing households by size, we developed precise standards covering area, facility, and location aspects. These new standards led to an 8.4% non-compliance rate in 2021. This research’s findings anticipate aiding the revision of minimum housing standards, formulating pragmatic policies for enhancing residential conditions in line with present situations.

Single-cell RNA sequencing (scRNA-seq) technology has significantly advanced our understanding of the diversity of cells and how this diversity is implicated in diseases. Yet, translating these findings across various scRNA-seq datasets poses challenges due to technical variability and dataset-specific biases. To overcome this, we present a novel approach that employs both an LLM-based framework and explainable machine learning to facilitate generalization across single-cell datasets and identify gene signatures to capture disease-driven transcriptional changes. Our approach uses scBERT, which harnesses shared transcriptomic features among cell types to establish consistent cell-type annotations across multiple scRNA-seq datasets. Additionally, we employ a symbolic regression algorithm to pinpoint highly relevant yet minimally redundant models and features for inferring a cell type’s disease state based on its transcriptomic profile. We ascertain the versatility of these cell-specific gene signatures across datasets, showcasing their resilience as molecular markers to pinpoint and characterize disease-associated cell types. Validation is carried out using four publicly available scRNA-seq datasets from both healthy individuals and those suffering from ulcerative colitis (UC). This demonstrates our approach’s efficacy in bridging disparities specific to different datasets, fostering comparative analyses. Notably, the simplicity and symbolic nature of the retrieved gene signatures facilitate their interpretability, allowing us to elucidate underlying molecular disease mechanisms using these models.

Dementia is a public health priority, in which memory impairments are prevalent and affects an individual’s daily activities. Research has tried to find ways to support memory problems of individuals with dementia. Self reference effect (SRE) has been shown to benefit memory in healthy, non-dementia group. The study aimed to investigate if SRE will improve memory performance of individuals with dementia. We used ecologically valid Ownership Procedure and the Remember/Know Paradigm to examine the Self-Reference Effect (SRE) on memory. It was hypothesised that participants living with dementia will perform differently in the recall of items that were self-referentially encoded compared to items other-referentially encoded and that the memory will be different in control participants than in those that live with dementia. The research found that self-referential processes did not have effect on memory in individuals with dementia. We suggest that impaired self-awareness may have contributed to the lack of this effect. However, we had a small sample size and these findings should be treated with caution.

The accessibility of public transportation is also known as the last mile problem, and it is one of the main obstacles that affect travelers to choose public transport. Although autonomous vehicles (AVs) have made much progress, they have not been officially put into commercial use. This paper adopts stated preference experiments to explore the impact of shared AVs on train trips’ last-mile travel behavior and takes Wuhan as an example for case analysis. First of all, this paper establishes a structural equation model (SEM) based on the theory of planned behavior to explore the latent psychological variables, including travelers’ attitudes (ATTs), subjective norms (SNs), perceived behavior control (PBC), and behavioral intention to use (BIU) toward AVs. These latent psychological variables are incorporated into the latent class (LC) logit model to establish a hybrid model to study the factors and degree of influence on the travel mode choice for the last mile of train trips. The results show that travelers have preference heterogeneity for the travel mode choice of the last mile of train trips. Through the analysis of LCs, education, career, and income significantly impact the classification of LCs. The latent psychological variables towards AVs have a significant impact on the travel behavior of respondents, but the impacts vary among different segments. Elastic analysis results illustrate that a 1% increase in the travel cost for shared AV in segment 1 leads to a 7.598% decrease in the choice probability of shared AV. Respondents from different segments vary significantly in their willingness to pay, and the value of travel time for high-income groups is relatively higher.

The predominance of traffic lights in urban settings often induces fluctuations in traffic patterns and energy utilization among vehicles. To counteract the adverse effects of traffic lights on the energy efficiency of electric vehicles (EVs), a Multi-Intersections-Based Eco-Approach and Departure strategy (M-EAD) is proposed. This strategy aims to enhance vehicle energy efficiency, traffic flow, and battery longevity, all while upholding satisfactory driving comfort. The M-EAD strategy unfolds in two distinct stages: the optimization of an eco-friendly green signal window and the refinement of speed trajectories. The initial stage tackles the optimization of traffic light green signal windows, underpinned by the minimization of travel delays via solving the shortest path problem. In the subsequent stage, a receding horizon framework takes center stage, leveraging an iterative dynamic programming algorithm to tackle the speed optimization challenge. The objective here is to curtail energy consumption and reduce battery wear by finding an optimal speed trajectory. Furthermore, the real-world efficacy of this approach is substantiated through on-road vehicle tests, attesting to its viability in actual road scenarios.

Polymer hydrogels are 3D networks consisting of hydrophilic crosslinked macromolecular chains, able to swell and retain water. Since their invention in the 1960s, they have become an outstanding pillar in the design, development, and application of engineered polymer systems suitable for biomedical and pharmaceutical applications (such as drug or cell delivery, regeneration of hard and soft tissues, wound healing, and bleeding prevention, among others). Despite several well-established synthetic routes of polymer hydrogels based on batch polymerization techniques, about fifteen years ago academia started to look for alternative methods involving simpler reaction paths, shorter reaction times, and lower energy consumption. In this context, frontal polymerization (FP) undoubtedly has become an alternative and efficient reaction model that allows for converting monomers into polymers via a localized and propagating reaction, by exploiting the formation and propagation of a “hot” polymerization front, able to self-sustain and propagate throughout the monomeric mixture. Therefore, the present work aims to summarize the main research outcomes, achieved during the last years, concerning the design, preparation, and application of FP-derived polymeric hydrogels, demonstrating the feasibility of this technique for the obtainment of functional 3D networks, and providing the reader with some perspectives for the forthcoming years.

Numerical simulations and experiments on evaporative condensers in air conditioning systems using R744 were performed. Two configurations were given to study the feasibility of operating the subcritical R744 cycle. It indicated the capable of evaporative cooling condensing R744 to liquify by analyzing the outlet temperature at the end of the condenser reached from 28.7oC to 30.3oC with the operating pressure from 72.6 bar to 68.5 bar. The mass flow rate in the study increases from 14.34 kg/h to 46.08 kg/h, the pressure drop also increases from 0.23 bar to 0.47 bar for the simulation and 0.4 bar to 0.5 bar for the experiment, respectively. This study indicates that a 5-layers of copper tubes configuration causes a higher pressure drop and lower COP when compared to an 8-layers of copper tubes that split into 2 sets for smaller pressure drop. In this study, the evaporative condensers using mini tubes that are flooded in the cooling water tank are suitable for the subcritical R744 air conditioning system. The results obtained from the experimental data are in good agreement with those obtained from the numerical results, with the deviation less than 5%.

We discuss the optimal control formulation for enhancement and denoising of satellite multiband images and propose to take it in the form of an L1-control problem for quasi-linear parabolic equation with non-local p[u]-Laplacian and with a cost functional of a tracking type. The main characteristic feature of the considered class of parabolic problems is the fact that the variable exponent p(t,x) and the anisotropic diffusion tensor D(t,x) are not well predefined a priori, but instead these characteristic non-locally depend on a solution of this problem, i.e., pu=p(t,x,u) and Du=D(t,x,u). We prove the existence of optimal pairs with sparse L1-controls using for that the indirect approach and a special family of approximation problems.

This study identified, analysed, and prioritised significant factors for standardising the Korean smart city project evaluation system. We analysed the efficiency and productivity of companies currently providing smart city services to consider both policy and practical aspects. The prioritisation of smart city planning reflects the latest trends in South Korea, where urban planning is moving towards smart city planning. Furthermore, the capacity building of public-private/private-private partnerships indicate the importance of business scalability. This indicates that smart city services are only stabilised when the private sector is involved and leads the project, rather than focusing on public development. The feasibility of building intelligent facilities indicates that smart city projects should be implemented after securing cost-benefit feasibility. The results were used as the basis for building an evaluation system, showing that in smart city convergence alliances, small- and medium-sized enterprises achieved the highest efficiency by reducing inputs to 81% and 86%, under the assumptions of constant and variable returns to scales, respectively. As the operational aspect is more problematic than the technical aspect, policy alternatives are necessary for smooth business progress, including increased flexibility of laws and institutions and the activation of policies that temporarily relieve regulations to demonstrate smart city projects.

Background: We aimed to investigate the effectiveness of postnatal ultrasonography in determining congenital anomalies of the kidney and urinary tract in term infants with or without a history of congenital anomalies of the kidney and urinary tract in the prenatal period. Methods: In this retrospective cohort study, the records of term infants aged between six weeks and three months undergoing urinary system ultrasonography during routine child care were examined. Results: Congenital anomalies of the kidney and urinary tract was determined in 121 (4.62%) of the 2620 cases included in the study. The most common anomaly was hydronephrosis (in 69.4% of the congenital anomalies of the kidney and urinary tract cases and 3.21% of all cases). Thirty-two of the 84 (38.1%) hydronephrosis cases detected by postnatal ultrasonography, three of the nine (33.3%) renal agenesis cases, four of the seven (57.1%) horseshoe kidneys cases, one of the four (25%) multicystic dysplastic kidney cases and two of the two (100%) duplex system cases could not be detected by prenatal ultrasonography. On the other hand, hydronephrosis was not detected at postnatal ultrasonography in 29 (1.1%) cases which detected mild or moderate hydronephrosis by prenatal ultrasonography scanning. Conclusions: In our study, it was observed that approximately one-third of the cases of hydronephrosis, unilateral renal agenesis, duplex system, horseshoe kidney, and ectopic kidney could not be detected at prenatal ultrasonography screening. We therefore believe that, in addition to prenatal ultrasonography screening, postnatal ultrasonography screening of all children for urinary tract anomalies would be beneficial.

When a suspension passes through a high-frequency standing sound wave, the particles it contains are manipulated by acoustic forces. In a one-dimensional sound field, these forces lead to a planar arrangement of the particles and the formation of agglomerates. It is known that the combination of these forces and depth filtration can be utilized to significantly increase the filter efficiency of coarse-pored media. So far, this concept has only been used in microfluidics. In this paper, we present the results of a scaled-up filtration channel to test the viability of the industrial application of acoustically assisted filtration systems for the removal of microparticles. The influences of acoustic power input, flow rate, and the porosity of the filter media are investigated. In addition to verifying the scalability, a significant decrease in the large particle fraction in the outflow of the channel was observed when a high-power sound field is applied. Furthermore, the formed agglomerates tend to rise to the fluid surface. The floating particles mostly consist of a large particle fraction.

Background: There is a lack of literature specifically examining the workplace bullying of apprentices and trainees in traditional, male-dominated sectors such as the Australian building and construction industry. Using social identity theory (SIT), the aim of this study was to gather the attitudes, thoughts, and feelings of construction industry leaders to better understand how social identification (i.e., group membership) impacts bullying on targets and perpetrators, and the willingness to report bullying for targets and bystanders. Method: One-on-one, semi-structured interviews using a purposive sample of eight leaders from construction and blue-collar industries. Qualitative data were analysed using reflexive thematic analysis. Results: Four overarching themes were identified: difficulties for apprentices transitioning into industry, the need for continued improvement to industry culture, reluctance to report bullying, and rethinking apprenticeships to empower. Each theme provides insight into the psychosocial phenomenon of the bullying of trade apprentices and suggests that an apprentices’ level of social identification with work groups shapes how bullying is identified, interpreted, and prevented. Conclusion: Findings from this study will be important for tailoring evidence-based interventions, human resource policies and initiatives for education and awareness training. Themes also highlight systemic inadequacies impacting apprentices’ mental health and skill development, with implications for the future sustainability of apprenticeship training agreements.

This study was aimed to identify perception, knowledge, attitude and nursing practice toward use of physical restraints among clinical nurses, and further examined the factors associated with nursing practice toward use of physical restraints. The research participants were 180 nurses from a urban general hospital located in Korea. Data were collected using self-report questionnaires and analyzed using t-test, ANOVA, Pearson correlation coefficients, and multiple regression. There were significant negative relationships attitudes towards the use of physical restraints with knowledge (r = -.32, p &lt; .001) and nursing practice (r = -.12, p = .107). Knowledge showed a positive correlation with nursing practice (r = .28, p &lt; .001). Factors affecting nursing practice of clinical nurses were identified as knowledge (β= .23), education experiences (Yes) (β= .18), and work unit (ICU) (β= .43). The explanation power of this regression model was 22% and it was statistically significant (F=7.45, p&lt;.001). The findings from this study suggest that knowledge, education experiences and work unit were the strongest predictor on nursing practice toward use of physical restraints. Thus, we propose that developing and applying evidence-based educational intervention programs by work unit to reduce the inappropriate use of physical restraints in hospitals are required.

This paper presents the case of a 75-year-old female with an extensive lesion located in the hard palate. Intraoral examination revealed an exophytic white lesion that extended from the entire left maxillary alveolar ridge to the palate beyond the midline. A thorough clinical, radiological, and histopathological examination confirmed the diagnosis of oral verrucous carcinoma.

Technology Readiness Levels (TRLs) is a well-established and widely used approach for defining the readiness of new technology. To this extent, it assesses technology maturity against specific benchmarks, ranging from 1 (concept) to 9 (market solution). Although this is a useful classification service, allowing us to establish a common language, there are cases where we find that this conceptual approach fails to adequately highlight the maturity of certain innovative endeavors and effectively steer their development to higher TR levels. We will present an empirical case where the TRL approach presented a critical shortcoming in highlighting the true and effective readiness of a specific technological development and could not suggest the next natural step in ascending the maturity ladder. We will seek to generalize for the case of co-creation at large, analyze why co-creation may be poorly serviced by the current TRL model and suggest an amendment that would allow the observed shortcoming of the traditional TRL approach to be overcome and its use extended also in such co-creative settings.

Data is present in the data sources like Files and Data bases, Retrieval of information from that data sources is one of the important issue nowadays. So for retrieval information from the data sources clustering is used. In the present market different types of clustering algorithms were available. But opting of the clustering is based on user requirements. This paper focuses on the study of hierarchical clustering approach on different conditions or measures or with customer choices like clustering process number of clusters generated at each level, number of levels, attributes range for performing the clustering on the given data set. In brief overview we discuss the hierarchical approach for clustering algorithm with the user opting choices.

PIEZO channels PIEZO1 and PIEZO2 are the newly identified mechanosensitive, non-selective cation channels permeable to Ca2+. In higher vertebrates, PIEZO1 expresses ubiquitously in most of the tissues and cells while PIEZO2 expresses more specifically in the peripheral sensory neurons. PIEZO channels contribute to a wide range of biological behaviors and developmental processes, therefore driving a significant attention in the effort to understand their molecular properties. One prominent property of PIEZO channels is their rapid inactivation, which manifests itself as a decrease of channel open probability in the presence of a sustained mechanical stimulus. Lack of the PIEZO channel inactivation is linked to various mechanopathologies emphasizing the significance of studying this PIEZO channel property and the factors affecting it. In the present review, we discuss the mechanisms underlying the PIEZO channel inactivation, its modulation by interaction of the channels with lipids and/or proteins, and how the changes of PIEZO inactivation by the channel mutations can cause a variety of diseases in animals and humans.

This paper is concerned with developing an efficient numerical algorithm for fast implementation of the sparse grid method for computing the $d$-dimensional integral of a given function. The new algorithm, called the MDI-SG ({\em multilevel dimension iteration sparse grid}) method, implements the sparse grid method based on a dimension iteration/reduction procedure, it does not need to store the integration points, nor does it compute the function values independently at each integration point, instead, it reuses the computation for function evaluations as much as possible by performing the function evaluations at all integration points in a cluster and iteratively along coordinate directions. It is shown numerically that the computational complexity (in terms of CPU time) of the proposed MDI-SG method is of polynomial order $O(Nd^3 )$ or better, compared to the exponential order $O(N(\log N)^{d-1})$ for the standard sparse grid method, where $N$ denotes the maximum number of integration points in each coordinate direction. As a result, the proposed MDI-SG method effectively circumvents the curse of dimensionality suffered by the standard sparse grid method for high-dimensional numerical integration.

Earthworms are iteroparous organisms with indeterminate growth, i.e. they continue to increase in size throughout their life and after completion of sexual development. Terrestrial oligochaetes vary greatly in size. Depending on the species, adult earthworms can reach between 10 mm and 3 m in length and between &lt;1 mm and &gt;25 mm in width, with most being of length 5-15 cm. Among the more than 7000 species described to date, very few (~20) reach lengths greater than 1 m. The longest earthworm on record is Amynthas mekongianus, which is found in the mud banks of the Mekong River in Southeast Asia and which reaches almost 3 m in length. It is about the same size as Megascolides australis, the ‘Giant Gippsland Earthworm’. These atypically giant earthworm species remain a scientific curiosity in terms of their biology, but they cannot be considered cases of gigantism. Gigantism occurs when organisms are much larger than normal or exhibit excessive growth. Earthworms obtain energy from the organic matter on which they feed, and their growth mainly depends on the quality of the resource and on the species, as well as on food availability, environmental factors, which can directly or indirectly affect growth by modifying food availability, and other factors such as competition. This is particularly evident in earthworms, which display indeterminate growth and large species-dependent variations in size. The biology, life cycle and growth and reproduction rates of Eisenia fetida (Savigny 1826) and Eisenia andrei (Bouché 1972), the earthworm species most commonly used in vermicomposting and vermiculture, have been widely reported. Here we present details of the enormous growth of individual specimens of Eisenia andrei and Dendrobaena hortensis reared under particular culture conditions and fed a special diet. Individuals almost 20 times the average weight of individuals of the species have been obtained. Possible explanations for this interesting phenomenon are discussed.

Introduction and Objective: Caudal block has been used in children for many years and is considered the gold standard for multimodal analgesia in the pediatric age group. Caudal block belongs to the category of central neuraxial blocks, which can provide both visceral and somatic analgesia. With the introduction of ultrasound into the clinical practice of anaesthesia, the caudal block is now performed under USG guidance. In our study, we aimed to compare the efficacy of a single caudal block in postoperative acute pain management, the need for additional analgesics, the incidence of side effects, the timing of initial analgesic administration, and the need for rescue analgesic administration (paracetamol 10 mg/kg) in circumcision surgery. Materials and Methods: 120 patients undergoing circumcision surgery were divided into 3 groups. The caudal block was performed in all cases under USG guidance. Only the caudal block was applied for cases in the Caudal group (Group C). The Caudal + paracetamol group (Group CP) received paracetamol 10 mg/kg intravenously (i.v.) and the caudal block. Patients in the Caudal + meperidine group (Group CM) received 1 mg/kg meperidine intravenously. The caudal block was performed in each case with a 0.5 ml/kg volume of 0.125% bupivacaine. Results: As a result of our study, it was found that the least postoperative pain occurred in 12.50% of the CM group (p=0.011). Significant results were obtained when weight and age variables were analyzed according to the groups (p-values p=0.011 and p=0.003, respectively). Significant differences were found between the input pulse values, 5-minute pulse values, 15-minute pulse values, and input SpO2 values (p values p < 0.001, p < 0.001, p=0.011, p=0.037, respectively). Only Wong-Baker pain scores at the 24th hour differed significantly from the periods measured after the groups (p < 0.001). There was no significant difference between the FLACC and Wong-Baker pain scores in the other periods. There was no difference between the groups regarding the time when postoperative analgesics were administered and the total amount of analgesics administered (rescue analgesic 10 mg/kg oral paracetamol) (p=0.408, p=0.238). Conclusion: Caudal block can be safely applied during circumcision. Ultrasound guidance increases the chances of success and reduces the complication rate. Caudal block can be safely used in pediatric surgery since it does not cause serious complications, has low postoperative pain scores, and reduces the number of postoperative analgesics.

In this paper, we investigate the cumulative historical entropy of the lifetime of an n-component coherent system under the assumption that all system components have failed at time t. Using the system signature, we can calculate the cumulative historical entropy of the system’s lifespan, which is an important aspect in determining a system’s predictability. This research produces a number of significant results, including expressions, bounds, and ordering aspects for this measure. In addition, we offer a method for finding a preferred system based on cumulative Kullback-Leibler discriminating information that is closely related to the parallel system. These findings provide important insights into the predictability and dependability of coherent systems, emphasizing the importance of this field.

This review provides an overview of the biotransformation of limonene and α-pinene, which are commonly found in wood residues and citrus fruit by-products, to produce high-value-added products. Essential oils derived from various plant parts contain monoterpene hydrocarbons, such as limonene and pinenes which are often considered waste due to their low sensory activity, poor water solubility, and tendency to autoxidize and polymerise. However, these terpene hydrocarbons serve as ideal starting materials for microbial transformations. Moreover, agro-industrial byproducts can be employed as nutrient and substrate sources, reducing fermentation costs, and enhancing industrial viability. Terpenes, being secondary metabolites of plants, are abundant in byproducts generated during fruit and plant processing. Microbial cells offer advantages over enzymes due to their higher stability, rapid growth rates, and genetic engineering potential. Fermentation parameters can be easily manipulated to enhance strain performance in large-scale processes. The economic advantages of biotransformation are highlighted by comparing the prices of substrates and products. For instance, R-limonene, priced at US$34/L, can be transformed into carveol, valued at around US$530/L. This review emphasises the potential of biotransformation to produce high-value products from limonene and α-pinene molecules, particularly present in wood residues and citrus fruit by-products. The utilisation of microbial transformations, along with agro-industrial byproducts, presents a promising approach to extract value from waste materials and enhance the sustainability of the antimicrobial, the fragrance and flavour industry.

The Earth’s synthetic gravitational and density models can be used to validate numerical procedures applied for a global (or large-scale regional) gravimetric forward and inverse modelling. Since the Earth’s lithospheric structure is better constrained by tomographic surveys than a deep mantle, most of existing 3-D density models describe only a lithospheric density structure, while 1-D density models are typically used to describe a deep mantle density structure below the lithosphere-asthenosphere boundary. The accuracy of currently available lithospheric density models is examined in this study. The error analysis is established to assess the accuracy of modelling the sub-lithospheric mantle geoid, while focusing on the largest errors (according to our estimates) that are attributed to lithospheric thickness and lithospheric mantle density uncertainties. Since a forward modelling of the sub-lithospheric mantle geoid comprises also numerical procedures of adding and subtracting gravitational contributions of similar density structures, the error propagation is derived for actual rather than random errors (that are described by the Gauss’ error propagation law). Possible systematic errors then either lessen or sum up after applying particular corrections to a geoidal geometry that are attributed to individual lithospheric density structures (such as sediments) or density interfaces (such as a Moho density contrast). The analysis indicates that errors in modelling of the sub-lithospheric mantle geoid attributed to lithospheric thickness and lithospheric mantle density uncertainties could reach several hundreds of meters, particularly at locations with the largest lithospheric thickness under cratonic formations. This numerical finding is important for a calibration and further development of synthetic density models of which mass equals the Earth’s total mass (excluding the atmosphere). Consequently, the (long-to-medium wavelength) gravitational field generated by a synthetic density model should closely agree with the Earth’s gravitational field.

This study empirically examines the spatial spillover effect of various environmental regulations on green technology innovation using panel data from 284 county-level cities in China between 2007 and 2019. A geographical-economic spatial weight matrix is constructed, and the spatial Durbin model is employed to identify the specific characteristics of this spillover effect. The findings indicate that the spatial spillover effect of green technology innovation primarily occurs through geographical transmission. However, there is no significant spatial autocorrelation when using the economic distance weight matrix. Various types of environmental regulations influence the spatial spillover effect of green technology innovation in distinct ways. Specifically, Market-motivated environmental regulation exhibits a U-shaped relationship with the spatial spillover effect, while Command-controlled environmental regulation demonstrates an inverted U-shaped relationship, suggesting a complementary effect. Additional research shows that the upgrading of industrial structure acts as a mediator between command environmental regulation and the spatial spillover effect of green technology innovation. Government departments should comprehensively coordinate Market-motivated environmental regulation and Command-controlled environmental regulation, accurately assess the intensity of Command-controlled measures, and prevent the migration of green technology innovation elements caused by excessive regulatory measures within enterprises.

We here investigate the dynamical behavior of a fractional-order predator-prey system with anti-predator behavior and Holling IV type functional response. First we study the non-negativity, existence, uniqueness, and boundedness of solutions to the system from a mathematical analysis perspective. Then, we analyze the stability of its equilibrium points and the possibility of bifurcations using stability analysis methods and bifurcation theory, and prove the existence of a supercritical Hopf bifurcation in the system. After providing numerical simulations to illustrate the conclusions theoretically derived, by summarizing those various analytical results obtained, we finally present three interesting conclusions that can contribute to better understanding and preservation of ecological systems.

Cropland abandonment is a widespread phenomenon with an increasing trend around the world, including China. Cropland abandonment is the result of a multi-scale and multi-factor nested structure, in order to comprehensively identify the individual and background effects, the study explores the causes of the differences in farmland abandonment levels at two levels: farm household and village, based on a hierarchical linear model. The results show that: (1) 83.63% of the differences in farm abandonment rates are differences in farm households while 16.37% are differences in their villages; (2) whether head of household is healthier, per capita cropland area, ratio of transferred farmland, possession of large-scale agricultural production machinery or livestock for agricultural production, ratio of agricultural income, and whether there are village cadres have a significant negative impact on abandonment rates at the farm household level; while at the village level, commuting distance, whether it is a suburb of a large or medium-sized city, topography of the village is plain or not, and ratio of the number of people in agricultural production in the village have a significant positive impact on abandonment rates, while whether it has experienced land expropriation has a significant positive effect on the abandonment rate; (3) commuting distance weakens the negative correlation between the ratio of transferred cropland and the ratio of agricultural income and the abandonment rate; whether it is a suburb of a large or medium-sized city strengthens the negative correlation between whether it owns large-scale agricultural production machinery or livestock and the abandonment rate; whether the topography of the village is plain weakens the negative correlation between the possession of large agricultural production machinery or livestock for agricultural production and the agricultural income ratio and the abandonment rate; ratio of the number of people in agricultural production in the village weakens the negative correlation between the ratio of transferred cropland and abandonment rate; and whether the village has experienced land expropriation strengthens the negative correlation between the ratio of agricultural income and abandonment rate.

Modulating the gut microbiota with probiotics has been identified as a promising therapeutic method for the management of gastrointestinal illnesses. The effectiveness of probiotics in the treatment of gastrointestinal disorders can only be determined by delving into their underlying mechanisms of action. Through an analysis of the underlying processes, this study hopes to provide light on the potential benefits of probiotics for treating a variety of gastrointestinal conditions. The study covers a wide variety of gastrointestinal conditions, such as IBS, IBD, and antibiotic-associated diarrhea. Modifying the gut microbiota composition, strengthening the gut barrier function, modulating the immune system, and producing beneficial metabolites are among mechanisms of action that have been investigated. The strain- and dose-specific variables essential to getting the best treatment results are also highlighted. This review, which synthesizes the current information, gives a thorough overview of the effectiveness of probiotics in treating a variety of gastrointestinal illnesses and illuminates potential avenues for further study and therapeutic use.

Forecasting electricity demand is of utmost importance for ensuring the stability of the entire energy sector. However, predicting the future electricity demand and its value poses a formidable challenge due to the intricate nature of the processes influenced by renewable energy sources. Within this piece, we have meticulously explored the efficacy of fundamental deep-learning models designed for electricity forecasting. Among the deep learning models, we have innovatively crafted recursive neural networks (RNNs) predominantly based on LSTM and combined architectures. The data-set employed was procured from a SolarEdge designer. The data-set encompasses daily records spanning the past year, encompassing an exhaustive collection of parameters extracted from solar farm (based on location in Central Europe (Poland Swietokrzyskie Voivodeship)). The experimental findings unequivocally demonstrated the exceptional superiority of the LSTM models over other counterparts concerning forecasting accuracy. Consequently, we compared multilayer DNN architectures with results provided by the simulator.

The divination function of China's Yijing has led to its circulation for thousands of years. In our exploration of Yijing's characteristics using big data, we have discovered variations in results between the coin toss method and the ancient yarrow-stalk method of divination, known as "the number for the great expansion method of divination(大衍之数)". The yarrow-stalk method serves as the fundamental method of divination in Yijing and continues to hold significance in studying the essential characteristics of Yijing. Despite the complexity of yarrow calculations, advancements in computer technology and big data have simplified its application. By employing the yarrow-stalk method, we simulated changes in the 64 hexagrams, calculated probabilities and proportions of hexagram alterations, and derived fundamental characteristics and patterns of hexagrams. Additionally, we constructed the spatial representation of lines and hexagrams. Through a binary system rearrangement, we created a 64x64 matrix illustrating hexagram transformations. Subsequently, we generated 100 million random hexagrams and analyzed line and hexagram changes accordingly. Our findings indicate the following:(1) Big data analysis reveals evident asymmetry in the hexagrams obtained through the yarrow-stalk method, with a triangular fractal characteristic forming the background.(2) Each of the 64 hexagrams exhibits a distinct probability distribution when transforming into other hexagrams, which can be categorized into five types.(3)The occurrence probabilities of Laoyang, Laoyin, Shaoyang, and Shaoyin are 18.61%, 6.387%, 31.38%, and 43.62% respectively. The probabilities of Yin and Yang occurrences are nearly equal, each close to 50%. However, the probability of Laoyang is approximately three times higher than that of Laoyin.(4) Visualized and analyzed the characteristics of hexagram changes greater than 100000 times using 3D statistical maps and Sankey diagram.These results demonstrate that the yarrow-stalk method effectively unveils the characteristics and underlying patterns of the 64 hexagrams. This study provides a novel approach for scientifically exploring the internal laws governing the 64 hexagrams in Yijing.

As an emerging model, self-service fitness centers are reshaping the consumer fitness experience globally. Given the crucial role of customer loyalty in the sustainable operation and management of fitness service enterprises, this study constructs a structural model incorporating service quality, service convenience, customer satisfaction, word-of-mouth intentions, and repatronage intentions. The model is designed to elucidate the factors and mechanisms impacting customer loyalty at self-service fitness centers and further investigates how these relationships are affected by service methods, either with staff or without staff. The study employs PLS-SEM to empirically analyze 552 customer questionnaires from four self-service fitness centers in first-tier cities in China. The results reveal positive correlations among the constructs in the structural model, emphasizing the important position of raising service quality standards and reducing the time and effort expended by customers in the management of customer loyalty. Concurrently, service convenience was found to play a significant driving role in customers' perceived service quality. Through the chain-mediating effect of service quality and customer satisfaction, service convenience exerts a considerable positive impact on word-of-mouth intentions and repatronage intentions. Moreover, the study reveals significant differences in these relationships when considering service methods, either with staff or without staff.

Hypoxia, associated with abnormal vessel growth, is a characteristic feature of many solid tumors that increases their metastatic potential and resistance to radiotherapy. Carbon ion radiation therapy, alone or in combination with other treatments, is one of the most promising treatments for hypoxic tumors because the oxygen enhancement ratio decreases with increasing particle LET. Nevertheless, the current clinical practice does not yet fully benefit from using carbon ions for tackling hypoxia. Here we give an overview of the existing experimental and clinical evidence supporting the efficacy of C-ion radiotherapy in overcoming hypoxia-induced radioresistance, followed by a discussion of the strategies proposed to enhance it, including different approaches to maximize the LET in the tumors.

In this paper we study a special kind of finite mixture model. The sample drawn from the model consisits of three parts. The first two parts are drawn from specified distributions f1 and f2, while the third one is drawn from the mixture. A problem of interest is whether the two distributions f1 and f2 are the same. To test this hypothesis, we first define the regular location and scale family of distributions and assume that f1 and f2 are regular denisty functions. Then the hypothesis transforms to the equalities of the location and scale parameters, respectively. To utilize the information in the sample, we use Bayes’ theorem to obtain the posterior distribution and give the sampling method. Then we propose the posterior p-value to test the hypothesis. The simulation studies show that our posterior p-value largely improves the power in both normal and logistic cases while nicely controls the Type-I error. A real halibut dataset is used to illustrate the validity of our method.

This paper presents a novel sensor for the detection and characterization of regions of air turbulence that would be of use to improve UAV stability in bad weather. It consists of a combined Schlieren imager and a Radar Acoustic Sounding System (RASS) to produce dual modality “images” of air movement within the measurement volume. The ultrasound modulated Schlieren imager consists of a strobed point light source, parabolic mirror, light-block and camera which are controlled by two laptops. It provides a fine scale projection of the acoustic pulse modulated air turbulence through the measurement volume. The narrow beam 40 kHz/ 17 GHz RASS produces spectra based on Bragg enhanced Doppler radar reflections from the acoustic pulse as it travels. Tests using artificially generated air vortices showed some disruption of the Schlieren image and of the RASS spectrogram. This should allow the higher resolution Schlieren images to identify the turbulence mechanisms that are disrupting the RASS spectra.

The study was conducted to prepare juice blend by using Orange, Carrot and Tiger-nut juices. Fully mature raw Orange, Tiger-nut and Carrot were processed into juice forms and combined in different ratios which were analyzed for their composition and Consumer’s acceptability. The analysis showed that the juice with higher Orange juice content had higher levels of acidity. This implies that they would last longer as they are not susceptible to spoilage by most organisms. The Juice with higher orange juice content was also found to be very rich in Vitamin C, due to inherent high amount of Vitamin C in raw Orange Fruit. However, it scored lowest in terms of general acceptability because the raw fruit was purchased separately and there’s a likelihood some of the Orange used in the Juice preparation were sour. This led to a sour taste in this Juice blend. The Juice blend that contained equal proportions of all three juices was the most acceptable to the consumers in terms of color, taste and Nutritional composition. It gave equal amounts of the unique properties of each fruit and provided a unique color and taste that was very appealing to the panelists. This product makes it possible to properly utilize these fruits, reduce post harvest losses, cater to different health needs of the consumers and ensure food security. It is recommended that further work should be done on antioxidant properties, other fruit blends and storage stability of the beverage to determine the shelf-life.

Solar concentration is the ability to harness solar radiation to increase the temperature of a receiver. The receiver is the component into which a heat transfer fluid can be flowed for an ORC system and produce electricity, or it can be used for high-temperature thermal storage, or even to implement thermochemical cycles. The choice of material is critical to ensure optimal performance and long-lasting operation. It is also essential that such material can operate at high temperatures and high thermal gradients. In short, material identification involves high thermal stresses that result in structural deformation. Different metal alloys were used to verify that the yield strength limit was not exceeded due to thermal stress induced by concentrated solar radiation. The problem was implemented in Matlab starting from the general heat equation. The purpose is to test whether thermal stress exceeds the yield strength, which is the condition in which elastic bonds in the material are changed, causing deformation. The best material identified was Inconel 740H, which had a high yield strength value and the lowest temperature difference. Under extreme working conditions, it can withstand thermally induced shocks.

Abstract: Background: The practice of menstrual hygiene(MH) is a public health issue and depends on various factors. Taboos and incorrect MH practices can lead to health hazards. This study aimed at assessing the Knowledge, Attitude, and Practice of MH among the female students and faculty of Medical and Health Sciences University. Materials and methods: This cross-sectional questionnaire survey between February and June 2023 using consecutive sampling. Univariate analysis and comparisons were done with a significant p-value <.05. Results: A total of 253 women participated in the study. The knowledge and practices of MH were good. There were significantly more irregular and painful periods in younger females (p=.005,.0001). 89% of women used disposable pads and least used menstrual cups. Younger women were unaware of menstrual cloth. The attitude towards menses varied, with younger females feeling annoyed (p=.002), and older females embarrassed (p=.0001) at menarche. About 1/3rd of participants perceived menstrual blood as unhygienic. Younger women were more open about talking about menses (p=.005). Conclusion: There was good knowledge and practices of MH among participants. There were differences in menstrual history and attitude among older and younger women. The attitude and beliefs vary among the participants, due to sociocultural factors and age differences.

In Japan, where the working population is declining, there is a growing expectation that the potential working population will play an active role, and in this context, administrative measures such as the promotion of women's activities have been implemented. However, there is no end to the number of women who leave the workforce after life events such as childbirth or child rearing.　For example, in Fukuoka Prefecture (population 5.1 million) alone, where we are based, it is estimated that there are 43,300 potential female workers. Many of these women have have been employed in the past, but have left the workforce due to childbirth, family care, or other reasons, and still wish to work. However, although this group has potential employment needs, they have not yet engaged in specific job-hunting activities, and thus are on the periphery of the labor market, without access to the current active labor market. There are many promising potential employees there, and support for their career redevelopment and participation in the labor market is required. On the other hand, few studies have been conducted in Japanese prefectures to systematically estimate social value, i.e., to determine the scope of impact on society and the stakeholders. This is an obstacle to the formulation of policies for women's advancement and the establishment of related social projects. This paper is aware of this problem and, based on the support for women seeking to re-enter society (career redevelopment) that the authors are implementing, selects seven prefectures in Kyushu, which is also a wide economic zone, as a support area and estimates the social value to companies and families in these areas by using SROI. As a result, it was derived that if 3,586 individuals were reemployed, the SROI ratio (1:X) X would be 76.1 in the first year of reintegration assistance activities and X would be 313.3 in the fourth year.

Suicide is a global public health concern that has enormous social and psychological 1 implications for individuals, families, and communities affected. While the rate of suicide in the 2 UK has remained steady over the years mainly due to the various approaches to detection and 3 management of suicidal ideation, it is still one of the main causes of mortality amongst people 4 between the age of 20 – 34 years. The recent global events such as the COVID-19 pandemic, global 5 warming, war, and various environmental catastrophes means that suicide and suicidal ideation 6 is expected to increase especially among younger people. Thus, evidence-based, population-wide 7 preventative approach will be needed to ameliorate the predicted increase in suicide. Also, to 8 understand the effects of some of the suicide prevention approaches, objective and universal risk 9 assessment approach is required. However, there is no universally accepted preventative approach 10 or tools of assessment. This review examines current advances in suicide prevention in the United 11 Kingdom. It examines the epidemiology, risk factors, as well as the strengths and limitations of 12 the various suicide risk assessment and prevention tools currently in use. We hope to obtain a 13 deeper understanding of how these approaches have evolved and their impact on enhancing mental 14 health and preventing suicide ideation in the UK. We present an in-depth review of existing suicide 15 prevention research and policies, while proposing areas for future research and improvement.16

This paper presents results from numerical simulations validated by experimental results related to the effects of DSSI on the dynamic response of bridges. An in-service overpass was shaken using the T-Rex, a large-amplitude mobile shaker from the National Hazards Engineering Research Infrastructure (NHERI) facilities. Studies implementing Finite Element Modeling to develop time histories, response spectra, and eigenmodes were conducted in a forward-modeling problem setup. Two models were created to assess the DSSI effects on the dynamic response of the bridge. One model included elements that incorporate DSSI effects, while the other had fixed-base boundary conditions. The response from the DSSI FEM model matched the field results better than the fixed-base model, in terms of the peak response amplitudes and identified natural frequencies and modes. The influence of a series of factors, such as the soil shear wave velocity, bridge height, bridge foundation embedment depth and the corresponding rigidity, slenderness, and embedment ratios, on the bridge response is presented.

Water is one of the most critical factors affecting environmental health. For this reason, estimating and monitoring the behavior of water in nature and preventing water pollution before it occurs are advantageous to avoid problems that may occur in terms of environmental health. In order to predict the behavior of water, the hydrological cycle needs to be evaluated on a basin basis. At this point, hydrological models can be used to make mathematical representations of hydrologi-cal processes. These models play an essential role in predicting and monitoring problems such as poor water quality, pollution, particle and sediment transport, and proliferation of oil and petro-leum derivatives among frequently encountered issues in environmental health. In this study, a 2D surface water model was created using soil and water assessment tool (SWAT) to simulate the lotic ecosystem and existing water quality in Tatlıçay Basin and to propose solutions for im-proving environmental health in Cankiri provincial center in Türkiye. The accuracy of the input data and the validity of the model were checked with the calibration and validation studies by using the monthly or 3-monthly observation data of the General Directorate of State Hydraulic Works’ flow observation & water quality stations from 2016 to 2020. The aim was to provide the opportunity to produce fast, accurate, and practical solutions in the face of negative scenarios with this model. This modelling study obtained successful results in the calibration and valida-tion process with very few observed data. With this study, a significant contribution to the litera-ture on environmental health is made, as there aren't many examples of hydrological modeling from the Middle East.

Diabetes mellitus is a chronic disease that affects millions of people worldwide. Article focuses on detecting the presence of diabetes in patients using microarray gene data obtained from the pancreas. Handle the high-dimensional nature of the data, four different dimensionality reduction techniques, namely Bessel Function, Discrete Cosine Transform (DCT), Least Square Linear Regression (LSLR), and Artificial Algae Algorithm (AAA) are used. After reduced the data, Meta-heuristic algorithms are applied like Dragonfly Optimization Algorithm (DOA) and Elephant Herding Optimization Algorithm (EHO) for feature selection. Ten classification techniques are using to classify the data in both the format like without feature selection method and with feature selection method. The classification techniques are Non-Linear Regression (NLR), Linear Regression (LR), Gaussian Mixture Model (GMM), Expectation Maximum (EM), Bayesian Linear Discriminant Classifier (BLDC), Logistic Regression (LoR), Softmax Discriminant Classifier (SDC), Support Vector Machine (SVM) with linear kernel, Support Vector Machine (SVM) with polynomial kernel, and Support Vector Machine (SVM) with Radial Basis Function (RBF) kernel. Results showed that the AAA with SVM(RBF) achieved an accuracy of 90% without feature selection. However, when feature selection was applied, with EHO of AAA with SVM(RBF) exhibited the highest accuracy of 95.714%, followed closely by with DOA of AAA with SVM (RBF) at 94.28%.