Measurements of temperature and salinity in the Amazon River plume in the open ocean of the western tropical North Atlantic are considered. The measurements were carried out using the AML CTD probe in the upper layer and a flow-through system that measures salinity and turbidity of seawater while the vessel is on the way. Additionally, archive oceanographic data from the WOD18 database, data of satellite altimetry measurements (AVISO), and satellite salinity data from Aquarius and SMOS were used. It is shown that the width of the Amazon plume is about 300–400 km, the depth of desalination is from 50 to 100 m. Surface salinity decreases compared to the background (36 PSU) by 0.5 PSU in February and more than by 3 PSU in September during the period of maximum development of the plume, which is determined from satellite measurements of surface salinity. Lagrangian modeling of the back-in-time advection of passive markers simulating freshwater particles was carried out. It was shown that the source of fresh water in the measurement area is the discharge of the Amazon.

Aim: To analyze a single center's experience with Short Bowel Syndrome/ Chronic Intestinal Failure (SBS/CIF) in adult patients treated with Home Parenteral Nutrition (HPN). Materials and methods: In the last thirty years, 13 patients with SBS/CIF were included in an HPN program. Results: Between 1992 and 2023, 13 patients were included in an HPN program. The primary underlying pathology was acute mesenteric ischemia. The median age of the starting HPN was 44 years old. Most are submitted to several surgeries of extensive intestinal resection with posterior intestinal reconstruction. Five of the 13 patients have died while on HPN for a median of 42 months. The causes of death HPN-related were catheter sepsis, endocarditis with cardiac failure, or hepatic failure. One patient died due to underlying pathology: pelvic abscesses and bleeding related to radiotherapy. Eight patients remain alive with a median time of HPN of 173 months. During the HPN support, the most frequent complications were venous catheter infection and venous territory thrombosis. None of the eight patients alive have hepatic failure. Two patients recently started teduglutide, with good tolerance, and need reduction of HPN support. All these eight patients have a satisfactory quality of life (parenteral support needs range between five to two nutrition bags per week). Conclusion: HPN remains the gold standard of SBS/CIF treatment, although Teduglutide may reduce HPN needs and HPN complications and provide a better quality of life. An HPN multidisciplinary healthcare group support is essential to ensure these patients' survival and quality of life. Keywords Short bowel Syndrome, Chronic Intestinal failure, Home Parenteral Nutrition, Teduglutide, Complications of Parenteral Support.

Amid the swift progression of the global automobile industry, the aspiration for lightweight vehicle design has surfaced as a crucial approach to boost fuel efficiency and curtail environmental impact. The objective of this study revolves around achieving holistic optimization of vehicle structure via detailed scrutiny of vehicle process characteristics, amalgamated with a Back Propagation neural network (BPNN) optimized by a genetic algorithm (GA) and a topology optimization (TO) method.The process initiates with an examination of the vehicle's technical characteristics, succeeded by an optimization protocol that couples GA with BPNN. This exhaustive optimization procedure derives the best-fit values of design parameters and identifies the globally optimal lightweight design approach. Subsequently, a comprehensive structural optimization is actualized by modifying the topological distribution of the structure.A simulation experiment of the conceptual car body beam skeleton is conducted as a conclusive step, and the anti-collision capacity of the car body beam skeleton is assessed by measuring deformation intrusion. The findings reveal that in the vehicle topology optimization, a comparative analysis of pre and post-optimization results indicates an improved topological density across diverse sections. The topological density of the vehicle's frontal structure escalates from 0.75 to 0.8. Following optimization, the stiffness assessment records a marginal increase (within the range of 0.02–0.05), implying that the lightweight design does not compromise the general rigidity of the structure.The optimized body structure manifests superior crashworthiness in the crash test: the deformation intrusion diminishes by 27% in front-end collisions. In side impacts, the deformation and intrusion at critical points are reduced by 13.15% to 10% respectively. The comprehensive method proposed herein proves to be an efficient strategy to actualize the lightweight design of vehicles.

The WORLD3 world model, which served as the basis for The Club of Rome report The Limits to Growth (1972), was criticized, among other things, for not being able to simulate social interactions. In order to remedy this shortcoming, a research group led by Karl Deutsch at the Berlin Science Center developed a far more comprehensive model between 1979 and 1988 entitled GLOBUS, which was supposed to be able to include political developments in the calculation. This article aims to explain the hopes that were attached to the creation of a further world model and the means by which attempts were made to assert its results. To this end, three genealogical lines of the model -I. as part of the world modeling community, II. as part of quantitative international relations research, III. as part of Karl Deutsch's cybernetic-political science research- will be presented. The data basis and the functioning of GLOBUS are then described. Finally, section VI is devoted to the research group's efforts to make the model "effective".

Based on a very fast numerical procedure for the determination of the subsurface stress field beneath frictional contacts of axisymmetric elastic bodies under arbitrary 2D oblique loading, the contact mechanical influences of loading parameters and contact profile geometry on the Smith-Watson-Topper (SWT) fatigue crack initiation parameter in elastic fretting contacts with superimposed normal and tangential oscillations are studied in detail. The efficiency of the stress calculation allows for a comprehensive physical analysis of the multi-dimensional parameter space of influencing variables. It is found that a superimposed normal oscillation of the contact can significantly increase or decrease the SWT parameter, depending on the initial phase difference and frequency ratio between the normal and tangential oscillation. Written in proper non-dimensional variables, the rounded flat punch always exhibits smaller values of the SWT parameter, compared to a full paraboloid with the same curvature, while the truncated paraboloid exhibits larger values. A small superimposed profile waviness also significantly increased or decreased the SWT parameter, depending on the amplitude and wave length of the waviness. While both the load protocol and the profile geometry can significantly alter the SWT parameter, the coupling between both influencing factors is weak.

This research focuses on the computational design and analysis of various winglet Design types on a Boeing 737 aircraft. The idea is to compare the efficiencies of various winglet design types on a Boeing 737 aircraft half wing span and the picking out the best winglet design in respect to the pressure generated at the wing-tip and the lift-to-drag ratio of each winglet designs. The coefficient of lift-drag ratio in this research contribute to the reduction of fuel consumption

Ribosomal proteins (r-proteins) are abundant, highly conserved, and multifaceted cellular proteins in all domains of life. Most r-proteins have RNA-binding properties and are able to form protein-protein contacts. Bacterial r-proteins govern the co-transcriptional rRNA folding during ribosome assembly and participate in formation of the ribosome functional sites such as the mRNA binding site, tRNA binding sites, the peptidyl- transferase center, and the protein exit tunnel. In addition to their primary role in a cell as integral components of the protein synthesis machinery, many of r-proteins can function beyond the ribosome (the phenomenon known as moonlighting), acting either as individual regulatory proteins or in complexes with various cellular components. Extraribosomal activities of r-proteins have been intensively studied over decades (reviewed in [1]). The past decade brought significant advancement in our knowledge of r-protein functions due to expanding studies on ribosomes and gene expression mechanisms not only in model bacteria like Escherichia coli or Bacillus subtilis, but also in previously little-explored bacterial species from various phyla. This review is aimed to update the information on multiple functions of r-proteins in bacteria.

Agarwood, a highly valuable fragrant wood of Aquilaria spp. has been widely used in perfumes, traditional medicine, religious rites and cultural activities. Due to the presence of aromatic and medicinal properties, the Agarwood has gained its economic importance in recent years. It has been providing livelihood and employment facilities to many people who are cultivating those. Owing to high demand and profitability, the people of Assam has started to cultivate Agarwood in a commercial manner in recent days. This study was conducted to examine the economic viability of Agarwood cultivation in Assam and to understand the problems of the cultivators to consider Agarwood cultivation as the primary source of income. The primary data were collected during the months of May and June, 2022 from 210 households using structured questionnaire. The cost-benefit analysis revealed that INR 100 of initial investment yields a net benefit of INR 623 which indicates that the return from the Agarwood cultivation among the cultivators are very high. Thus, the present study argues that the government should encourage the cultivators by providing the necessary support in the form of a legalized market, credit requirement, creating the awareness about the demand of Agarwood and making provision of training.

Weather has significant impact on growth and plants development. It is important to analyze the influence of changing climate conditions on expression of plants agronomical characters. Two flax varieties were grown from 1987 to 2018 in the North-West of Russia. Whether conditions and their influence on flax agronomic characters were analyzed using variance and correlations analyses. Significant influence of year conditions on the manifestation of all evaluated characters was revealed. Starting from June high temperatures accelerate the development of plants at all stages. Prolongation of germination - flowering period is the most important for fiber productivity improvement. Oppositely, for formation of high quality fiber fast ripening in hot weather after flowering is preferable. Such data give possibility to predict the amount and quality of yield. Usage of weather conditions data also permits to compare results obtained in different years. Suggested method of year’s meteorological conditions classification can be used in other genebanks for systematization and analyses of crops field evaluation results. Correlation analyses reviled 3 correlated pleiades: (1) pleiade of productivity, (2) pleiade of fiber quality and yield, (3) pleiade of the growing season phases duration, the sums of active temperatures and precipitation during each period. Great influence of growing conditions on economically valuable traits indicates the necessity of searching for genotypes with stable characters manifestation for breeding new varieties, which will give stable yield and fiber of good quality.

Spectral image analysis has the potential to replace traditional approaches for assessing plant responses to different types of stress including herbicide, through non-destructive and high-throughput screening (HTS). Therefore, this study was conducted to develop a rapid bioassay method using a multi-well plate and spectral image analysis for diagnosis of herbicide activity and mode of action. Crabgrass (Digitaria ciliaris) as a model weed was cultivated in multi-well plates and subsequently treated with 6 herbicides with different modes of action when they reached the 1-leaf stage, using only a quarter of the recommended dose. To detect plant response to herbicides, plant spectral images were acquired after herbicide treatment using RGB, infrared (IR) thermal, and chlorophyll fluorescence (CF) sensors and analyzed for diagnosing herbicide efficacy and mode of action. Principal Component Analysis (PCA) using all spectral data successfully distinguished herbicides and clustered depending on their modes of action. The performed experiments have shown that the multi-well plate assay combined with spectral image analysis can be successfully applied for herbicide bioassay. In addition, the use of spectral image sensors, especially in CF image, would facilitate HTS by enabling rapid observation of herbicide response, as early as 3 hours after herbicide treatment.

This paper maps the causes of the demographic, economic and social decline of a selected border micro-region during the last century. The decline occurred due to the location being remote, lacking natural resources and having an unsuitable industrial structure. Historical events associated with the post-war deportation of the German population and efforts to create a classless society also played a role in the decline. The results are an 87% population decrease, the demise of most companies, a very low level of human capital and unemployment reaching up to 5%. In order to comprehend the current state of the border micro-region and predict future development, it is necessary to understand the development that has occurred since approximately the middle of the nineteenth century. The European countryside is certainly not homogeneous, and different regions have shown unique mixes of positional, natural, economic and political factors. Some hope has been raised in relation to the transition to a post-productive economy, a transition that turns the remoteness of the region into an advantage. This is confirmed by the positive migration balances of the smallest municipalities in the last decade.

This narrative review delves into the evolving landscape of fertility preservation techniques with a particular focus on their use in patients undergoing oncology treatment that carries a risk of ovarian insufficiency. Advances in established methods such as cryopreservation of oocytes and embryos are highlighted and the increasing use of gonadotropin-releasing hormone (GnRH) agonists is discussed. The review also addresses the complexities and controversies associated with these approaches, such as the 'flare-up' effect associated with GnRH agonists and the potential of GnRH antagonists to reduce the risk of ovarian hyperstimulation syndrome. Despite advances in fertility preservation, the report highlights the challenges we face, including the need for personalized treatment protocols and management of associated risks. It calls for continued research and collaboration between healthcare professionals to refine these techniques and ultimately improve reproductive outcomes for patients facing the prospect of fertility-impairing treatment.

Quantification of erythrocytes and leukocytes is an essential aspect of hemogram diagno- 23 sis in Veterinary Medicine. Flow cytometry analysis, laser scattering, and impedance detection are 24 standard laboratory techniques, verified by manual microscopy counting. Although single-cell scat- 25 tering is already used as a standard technology for differentiating cell counts in flow cytometry, it 26 requires capillary cell separation. The current study investigates the scattering characteristics of 27 whole blood to identify correlations with erythrocytes and leukocytes counts. The scattering infor- 28 mation present in blood samples can be classified into three types: i) geometrical scattering, which 29 occurs when non-absorbed light is reflected and scattered, ii) Mie scattering, which happens when 30 light is scattered by particles of a similar size to the wavelength, and iii) Rayleigh scattering, which occurs when light is scattered by particles that are smaller than the incident light wavelength. In 32 this study, we investigate the scattering correction coefficients of dog blood absorption spectra in 33 the visible-near infrared range, to establish direct correlations with erythrocytes and leukocytes 34 counts, using multivariate linear regression. Our findings demonstrate the possibility of using the 35 scattering properties of dog blood, which is a step towards the existence of a portable and miniatur- 36 ized hemogram diagnosis in Veterinary Clinics worldwide.

The widespread use of hydrophilic intraocular lenses (IOL) in eye surgery, fabricated by poly-2- (hydroxyethylmethacrylic acid) (PHEMA), has highlighted their calcification as a serious problem, which implies their surgical explantation a rather risky process. The field of biomaterials has been developing rapidly in recent years with research interest turning to the development of novel ma-terials which involve either copolymers of PHEMA or protective functional coatings. Graphene coatings are particularly attractive because of the respective unique properties. In the present work we present the results of the investigation of the development of graphene coatings on hydrophilic IOLs and their subsequent performance with respect to calcification opacification. Hydrophilic IOL with water content of 18% by weight, were coated with graphene oxide (GO) by equilibration with GO suspensions in water. The concentrations of the suspensions ranged 1x10-4 to 20x10-4 % w/v. The GO suspensions were equilibrated with the IOLs for 5 days at constant temperature, 37°C, rotated in 30 mL tubes end over end. This treatment, resulted in the formation of a uniform coating of GO on the IOLs verified by scanning electron microscopy (SEM) and other physicochemical methods. The contact angle of the GO coated IOLs decreased significantly in comparison with the uncoated. The GO-coated IOLs exhibited higher tendency to calcify in supersaturated solutions simulating aqueous humor (SAH). The growth rate of hydroxyapatite (Ca5(PO4)3OH, HAP) on GO-coated IOLs was higher, in comparison with the respective untreated IOLs. The conversion of the GO coating by reduction with phenyl hydrazine resulted in the formation of reduced graphene (rGO) surface film, identified by Raman and XPS spectroscopy. of the rGO film was hydrophobic (contact angle 100 o) and did not calcify in supersaturated calcium phosphate solutions.

This study considers the values of the credit payments that are made at random values for both payment size and number. The simultaneous existence of the two random variables increases the total value of the volatility of the payment process. The dependence for the simultaneous influence of the two random variables is derived by applying conditional probabilistic formulations. Formal relations apply to animal husbandry credit payments. The credit policy was analyzed for the cases of regular payments and with a stochastic number of payments. A recommendation for the upper level of credit payments is proposed based on a model predictive approach using historical payment data. A credit management algorithm is derived, in which decision-making for credit payments is formally derived and numerically discussed. The application of derived quantitative relations is empirically applied to real data on animal husbandry. The recommendations from the dependencies obtained allow a reduction in the mean values of credit payments, which correspond to a reduction in the credits used for business management, without a change in business policy.

(1) Background If placenta percreta (PP) is suspected, one should take into account ultrasound and MRI data, which allow one to assess not only the depth of invasion of the placenta into the myometrium, but also the degree of involvement of the blood vessels of the uteroplacental region and the pelvis, the formation of adhesions and collaterals between organs as well; (2) Methods: The patient with suspected PP was examined by ultrasound and Magnetic Resonance Imaging (MRI) examination. Histological study was performed on paraffin sections (hematoxylin & eosin, Mallory staining); cytotrophoblast was detected with antibodies to cytokeratin-8; (3) Results MRI and ultrasound examinations showed placental invasion extending beyond the serous lining of the uterus involving the posterior wall of the bladder. Elective abdominal delivery was performed at 37 weeks. Surgical excision of the uterine wall with invaded villi and involved fibrous bladder wall were performed. Histological study revealed invasive cytotrophoblast cells in the uterine wall located up to adventitia of the uterine subserosal vessels only. Thinning of the uterine wall up to the serous membrane was detected; (4) Conclusions: Placental villi and trophoblast extended beyond the uterus is not histology equivalent to placenta percreta. To diagnose PP instrumental visualization methods should be used.

Support effect is an important issue in heterogeneous catalysis while the explicit role of a catalytic support is often unclear for catalytic reactions. A systematic density functional theory computational study is reported in this paper to elucidate the effect of a model boron nitride (BN) support on the first N-H bond activation step of NH3 on Run (n =1, 2, 3) metal clusters. Geometry optimizations and energy calculations were carried out using density functional theory (DFT) calculation for intermediates and transition state from the starting materials undergoing the N-H activation process. The primary findings are summarized as follows. The involvement of the model BN support does not significantly alter the equilibrium structure of intermediates and transition state in the most favorable pathway (MFP). Moreover, the involvement of BN support decreases the free energy of activation, ΔG≠, thus improving the reaction rate constant. This improvement is more obvious at high temperatures like 673 K than low temperatures like 298 K. The BN support effect leading to the ΔG≠ decrease is most significant for the single Ru atom case among all three cases studied. Finally, the involvement of model BN may change the spin transition behavior of the reaction system during the N-H bond activation process. All these findings provide a deeper insight into the support effect on the N-H bond activation of NH3 for supported Ru catalyst in particular and for supported transition metal catalysts in general.

This paper investigates the constructability of angles multiples of 3 within the framework of Euclidean geometry. It makes a significant contribution by presenting the first geometric construction for all such angles, offering a rigorous solution to a longstanding geometric problem. The paper reaffirms the efficacy of Euclidean geometry in providing precise constructions and robust proofs for these angles, demonstrating the enduring strength of Euclidean principles from classical to modern times. The presented workflow goes beyond Euclidean geometry to examine non-Euclidean methods, particularly analytical approaches, revealing misconceptions that compromise the genetic and geometric rigor of Euclidean principles. The paper exposes incongruities when algebraic proofs related to angle constructability are applied to the Euclidean system, emphasizing the misalignment of fundamental geometric concepts. A notable result in the paper is the construction of a angle, introducing the “ angle chord” as a novel geometric property. This property challenges assumptions made by non-Euclidean methods and highlights the nuanced geometric properties crucial for rigorous constructions. The paper refutes the fallacy of relying solely on algebra for solutions to angles multiples of , emphasizing the necessity of embracing Euclidean geometry for geometric discoveries. The paper underscores the merits and resilience of Euclidean geometry, showcasing its independence and depth across historical and modern perspectives. The newly presented geometric construction not only resolves a longstanding question but also emphasizes the intrinsic strength and uniqueness of Euclidean principles in contrast to alternative methodologies.

The prohibitive costs of small-scale solar photovoltaic (PV) racks decreases PV adoption velocity. To overcome these costs challenges, an open hardware design method is used to develop two novel variable tilt racking designs. These are the first stilt mounted racking designs that allow manual change of tilt angle from zero to 90 degrees by varying the length of cables. The racks are designed using the calculated dead, wind and snow loads for Canada as conservative design for most of the rest of the world. Structural capacities of the wooden members are then ascertained and resisting bending moment, shear force, tensile force, and compressive force for them is calculated. A structural and truss analysis is performed to ensure that racking design with-stands the applicable forces. Moreover, implications of changing the tilt angle on the wooden members/cables used to build the system are also determined. The systems offer significant economic savings ranging from 1/3rd to 2/3rd the capital expenses of the commercially available alternatives. In addition, the racking designs are easy-to-build and require minimal manufacturing operations, which increases their accessibility. The stilt-mounted designs can be employed for agrivoltaic settings while allowing farm workers shaded ergonomic access to perform planting, weeding, and harvesting.

The article outlines a creative approach by fusing ideas from fuzzy contractions, graph mappings, and Kannan mappings to create a brand-new notion known as "Kannan-graph-fuzzy contraction." This combination of concepts makes it possible to create a unique framework for resolving real-world issues controlled by nonlinear models. It is anticipated that using Kannan-graph-fuzzy contractions will offer a fresh approach to discussing solution existence in situations where these ideas overlap. This strategy might have a significant impact on a lot of real-world applications, proving how practical multidisciplinary techniques are for tackling issues in the real world originating from technology and engineering. The article includes several illustrated examples based on computer simulations, making the results more explicit.

A paddle wheel aerator is developed in this research, which includes a wireless sensor network for measuring the water quality in the aquaculture of marine shrimp ponds. It can also move to the desired position to fill oxygen and measure water quality. A basic requirement is good standard water quality to prevent shrimp from epidemics and improve production. The water quality paddle wheel aerator applies a microcontroller and sensors to measure eight parameters of water quality. These water quality parameters are observed on the web application via an IoT module. The movement system of the water-quality paddle wheel aerator consists of a LiDAR, GPS, and remote RF signal. Each item of data is recorded immediately on the cloud server while the water-quality paddle wheel moves in the marine shrimp farm. The controlled paddle wheel aerator is harnessed automatically to enhance precisely the spatial monitoring resolution of the measurement system installed, which is needless for a multiple measurement system with high cost of investment. Also, farmers can access real data through the Line application. Hence, they are able to plan and control a good environment for aquaculture, preventing the occurrence of various epidemics and decomposing organic matter in the pond.

Background: Coronavirus disease (COVID-19) has caused one of the worst global pandemics in recent decades. It has disrupted education systems worldwide, leading to a forced shift from traditional face-to-face to blended or fully distanced learning, requiring a higher level of student readiness for self-directed learning (SDL) and a more internal locus of control (LOC). Objective: This study explored the relationship between locus of control and level of readiness for SDL among Saudi nursing students and whether the COVID-19 pandemic has impacted this relation-ship. Methods: a cross-sectional correlational descriptive study was conducted to survey 277 Saudi nursing students enrolled in the bachelor program at one of the reputable universities in Saudi Arabia. An E-questionnaire containing two scales, the Self-Directed Learning Readiness Scale for Nursing Education, and the Locus of Control Scale, was used to collect data in addition to the selected participants’ characteristics. Results: Nursing students had a moderate-to-low level of readiness for SDL (mean = 144.0), and the majority had an external LOC. There was a significant association between the locus of control and level of readiness for self-directed learning (r = 0.19*, p = 0.001), and the internal locus of control was more significantly associated with self-directed learning (r = 0.22*, p = 0.0001) than with external locus of control. Conclusion: The study findings indicate a propensity of respondents towards an external locus of control, whereas most of the respondents’ reported levels of readiness ranged between low and moderate across all dimensions of self-directed learning. This study was not registered.

We discuss the neutron skins of 48Ca and 208Pb. We review and critically examine modern predictions and empirical constraints, with special attention to the dierent interpretations of the ndings from the PREX-II experiment and the recently reported value of the neutron skin in 48Ca extracted from the CREX experiment. We argue that, in the spirit of the ab initio philosophy, the path to understanding the behavior of dense neutron-rich matter must not circumvent fundamental nuclear forces. Based only on that argument, a thick neutron skin in 208Pb is highly unlikely.

The research methods were used to investigate the following questions: Does a mobility training intervention change tissue stiffness, joint range of motion, and compensate for possible imbalances? Do the interventions influence the pressure pain threshold and the overall well-being?

In recent times, models like the Transformer have showcased remarkable prowess in tasks related to natural language processing. However, these models tend to be excessively intricate and demand extensive training. Additionally, while the multi-head self-attention mechanism in the Transformer model aims to capture semantic connections between words in a sequence, it encounters limitations when handling short sequences, thereby limiting its effectiveness in 5-polarity Arabic sentiment analysis tasks. The switch-transformer model has recently emerged as a high-performing alternative. Nevertheless, when these models are trained using single-task learning, they often fall short of achieving exceptional performance and struggle to generate robust latent feature representations, especially when working with compact datasets. This challenge is particularly pronounced in the case of the Arabic dialect, which is considered a low-resource language. Given these constraints, this research introduces a novel approach to sentiment analysis in Arabic text. This method leverages multitask learning in tandem with the switch-transformer shared encoder to enhance model adaptability and refine sentence representation. By introducing a mixture of expert (MoE) mechanism that break down the problem into smaller, more manageable sub-problems, the model becomes adept at handling lengthy sequences and intricate input-output relationships, benefiting both five-point and three-polarity Arabic sentiment analysis tasks. This proposed model effectively discerns sentiment in Arabic dialect sentences. The empirical results highlight the outstanding performance of the suggested model, as evidenced in evaluations on the Hotel Arabic-Reviews Dataset, the Book Reviews Arabic Dataset, and the LARB dataset.

This comprehensive review explores the principles, applications, and future directions of human-powered energy generation technologies. It begins by providing a detailed examination of viable human energy sources, elucidating the physical principles behind various energy harvesting devices. The review then compiles and assesses existing products in the field of human power generation, while also outlining the opportunities and challenges it presents. Finally, an innovative concept of an eco-village system is introduced to demonstrate a future potential application scenario for human-generated electricity. It outlines two developmental stages for this system and underscores its significance in the construction of the harmonious and sustainable communities. This forward-thinking approach could pave the way for broader discussions on sustainable living and eco-friendly energy generation in a world increasingly focused on environmental concerns and social stability.

The aim of this paper is to deep into the dynamic study of the well known Chebyshev-Halley family of iterative methods for solving nonlinear equations. Our objetives are twofold: one the one hand, we are interested in characterize the existence of extraneous attracting fixed points when the methods in the family are applied to polynomial equations. On the other hand, we are also interested in study the free critical points of the methods in the family, as a previous step to determine the existence of attracting cycles. In both cases, we want to identify situations where the methods in the family have a bad behavior from the root-finding point of view. Finally, and joining these two studies, we look for polynomials for which there are methods in the family where this two situations happen simultaneously. That is, the rational map obtained by applying a method in the Chebyshev-Halley family to a polynomial has both super-attracting extraneous fixed point and super-attracting cycles different to the roots of the polynomial.

ABSTRACT(1) Background:. Because of the numerous debates about the training on the use of force provided to police officers, this study intends to evaluate several parameters (Police Ergonomic Parameters, PEP) in connection with such training. (2) Research method: : A smartsuit equipped with a set of 19 wireless sensors including triaxial accelerometers, Inertial Measurement Units (IMU), gyroscopes and geomagnetic sensors has been used. Biomechanics of Body (BoB) software application allowed to evaluate the risks associated to the basic technique number 1 of the Operational Tactical Procedures (OTP) with regard to the established parameters (PEP). The OTP basic technique number 1 was performed by 4 novice police officers. (3) Results: According to the evaluation of a number of specific parameters such as Rapid Entire Body Assessment (REBA), asymmetry over the sagittal plane, compression force at the L5-pelvic junction, shear force at the L5-pelvic junction and total muscle power, it was observed that the measured values clearly varied depending on each individual's performance, although they remained consistent with the values established by Police Ergonomic Parameters, and were significantly different from the values measured when a police officer used a traditional physical intervention procedure, in which case, the values measured were indicative of higher risks. (4) Conclusions: In order to achieve lower and more uniform values in terms of risk, we believe that it is necessary to employ a greater number of hours to the training of police officers on the use of force and also the convenience of conducting further studies on a larger and more representative sample of officers.

Yogurt ice cream (YIC) containing Bifidobacterum longum subsp. longum TISTR 2195 (B. longum) with different fat contents (2 and 10% fat) and prebiotics (galacto-oligosaccharide, GOS and fructo-oligosaccharide, FOS) was investigated for its physicochemical properties, microstructure, and survival of B. longum during storage time and in a simulated gastrointestinal tract. Fat contents affected pH, fat particle size, hardness, melting rate, and solid-like characteristic of ice cream while FOS seemed to enhance the hardness and elasticity of YIC better than GOS due to less solubility and denser microstructure which exhibited more solid-like properties than YIC containing GOS. The interaction effect of fat content at 10% fat and FOS in YIC seemed to promote more sensorial acceptance than the ice cream containing 2% fat and GOS. The fat content, concentration of prebiotics, and type of prebiotics were attributed to the survival of B. longum in YIC. Moreover, the survival number of B. longum in YIC during storage for 180 days and in the simulated gastrointestinal tract was still in 106 CFU g-1, which is considered to benefit human health. Finally, probiotic YIC in this study could be used as a guide for functional ice cream manufacture future.

The analysis of water inflow is a key issue in the construction of subsea tunnels. However, present research on the water inflow of subsea tunnels is predominantly focused on single-bore tunnels. Given the current practices in engineering, it is common to see a parallel configuration of three bores. In such cases, the proximity of tunnels to one another might result in alterations to the water inflow due to the interplay of seepage fields. This paper begins by conducting a numerical simulation to assess the water inflow characteristics of a three-bore parallel subsea tunnel. The study then investigates the impact of many factors, including the permeability coefficient of the surrounding rock, the depth of the seawater, the depth of the tunnel, the spacing between tunnels, and the relative size of the tunnels, on the water inflow phenomenon. Furthermore, based on the principles of the analytic hierarchy process and fuzzy mathematics, a comprehensive assessment framework is developed to evaluate the water inflow of three-bore parallel subsea tunnels. Ultimately, this grade of water inflow is used in practical engineering. The results show that there is mutual influence between the three parallel tunnels, and the predicted water inflow will be too large if the single tunnel model is adopted. The interaction between tunnels should be considered in the water inflow grade evaluation system of the three-hole parallel submarine tunnel. Engineering cases show that using a single-hole tunnel model without considering the interaction between tunnels will lead to higher water inflow grades. The research results of this paper can provide guidance for the waterproofing and drainage design of three parallel subsea tunnels and the stability analysis of surrounding rocks.

We review the main features of the non-local gauge, named the contour gauge. The contour gauge belongs to the axial type of gauges and extends the local gauge used in the most of approaches. The geometry of gluon fields and the path-dependent formalism are the essential tools for the description of non-local gauges. The principle feature of the contour gauge is that there are no the residual gauges which are left in the finite domain of space. In the review, we present the useful correspondence between the contour gauge conception and the Hamiltonian (Lagrangian) formalism. The Hamiltonian formalism is turned out to be a very convenient framework for the understanding of contour gauges. The comprehensive comparison analysis of the local and non-local gauges advocates the advantage of the contour gauge use. As an example of practical worth, we consider the Drell-Yan process and discuss the gauge invariance of the corresponding hadron tensor. We show that the appropriate use the contour gauge leads to the existence of extra diagram contributions. These additional contributions, first, restore the gauge invariance of the hadron tensor and, second, give the important terms for the observable quantities. We also demonstrate the significant role of the additional diagrams to form the relevant contour in the Wilson path-ordered exponential. Ultimately, it leads to the spurious singularity fixing. Moreover, in the present review, we discuss in detail the problem of spin and orbital angular momentum separation. We show that in SU(3) gauge theories the gluon decomposition on the physical and pure gauge components has a strong mathematical evidence provided the contour gauge conception has been used. In addition, we prove that the contour gauge possesses the special kind of residual gauge that manifests at the boundary of space. Besides, the boundary field configurations can be associated with the pure gauge fields.

Sleep-related eating disorder (SRED) is a non-REM parasomnia with potentially significant negative effects on general health (dangerous activities during night eating episodes, obesity, or metabolic syndrome, for example). Although the history of SRED encompasses more than six decades, public awareness and even the awareness of the mental health specialists of this disorder is very limited, a phenomenon that hinders the development of research in this field. Therefore, an updated review, based on a narrative methodology, explored the available evidence for SRED found in four electronic databases (PubMed, Cochrane Collaboration, Google Scholar, and Clarivate/Web of Science). A number of 94 primary and secondary reports were retrieved, investigating aspects regarding the risk factors, epidemiology, clinical data and differential diagnosis, epidemiology, structured evaluation, and treatment of SRED. Based on the results of these reports, Z-drugs, but also certain benzodiazepines, antidepressants, antipsychotics, and psychostimulants may trigger the onset of SRED. Psychiatric and neurologic disorders have also been associated with SRED, either as risk factors or comorbid conditions. Cerebral glucose metabolism dysfunctions, neurotransmitter dysfunctions, and genetic factors have been invoked as pathogenetic contributors. Structured assessment of SRED is possible, but there is a dearth of instruments dedicated to this purpose. Data on the prevalence and treatment of SRED exist, but good-quality epidemiological studies and clinical trials are still missing. In conclusion, future research is expected to address the shortcomings of SRED exploration by creating the conditions for better quality and larger group clinical research. The need for such investigation is granted by the importance of this pathology and its negative functional consequences.

Measles remains a highly contagious and potentially severe infectious disease, necessitating high vaccine coverage. However, misinformation and measles vaccine hesitancy/resistance posed significant challenges to achieving this goal. The COVID-19 pandemic further exacerbated these challenges, leading to a measles outbreak in Jordan in 2023. This study aimed to investigate the acceptance of the Measles-Rubella (MR) vaccine among parents in Jordan and identify its associated determinants. This cross-sectional questionnaire-based study was conducted using a previously Arabic-validated version of the Parental Attitudes towards Childhood Vaccines (PACV) survey instrument. Data collection took place in October 2023, and the final study sample comprised a total of 391 parents, with mothers representing 69.8% of the participants (n = 273). The majority of participating parents expressed either resistance (n = 169, 43.2%) or hesitancy (n = 168, 43.0%) towards MR vaccination, while only 54 participants (13.8%) expressed MR vaccine acceptance. Multivariate analysis revealed that trust in vaccine safety/efficacy, behavior, and having fewer offspring were significantly associated with MR vaccine acceptance. The current study revealed a concerning level of MR vaccine hesitancy/resistance among parents in Jordan. Urgent and targeted interventions are strongly recommended to address this issue, including mass campaigns aimed at building trust in the MR vaccine safety/efficacy. Additionally, there is an urgent need for effective public health initiatives to ensure sufficient measles vaccine coverage to prevent future outbreaks of this serious disease.

The fourth industrial revolution has resulted in the digitalization of projects and operations across all sectors. Accordingly, efforts are being made to utilize advanced technologies to improve the energy efficiency of the building sector. This study has reviewed the current application and limitations of cutting-edge technologies in this regard. An overview of the use of the Internet of Things (IoT), artificial intelligence (AI), digital twin (DT), and building information modeling (BIM) for energy efficiency of buildings has been provided. It has been found that the use of Industry 4.0 technologies, during the construction and operational phase of buildings, has a great potential to reduce energy consumption and emissions of the sector. This study may help stakeholders of the built environment to understand the role of industry 4.0 tools for energy efficiency of the sector.

The Supersymmetry Genetic code (SSyGC) table is based on five physicochemical symmetries: 1) double mirror symmetry on the principle of the horizontal and vertical mirror symmetry axis between all bases (purines [A, G) and pyrimidines (U, C)], and 2) of bases in form of codons 3) direct – complement like codon/anticodon symmetry in the sixteen alternating boxes of the genetic code columns, 4) A+T rich and C+G rich alternate codons in the same row between both columns of the genetic code, 5) the same position between divided and undivided codon boxes in relation to horizontal mirror symmetry axes. The SSyGC table has a unique physicochemical purine – pyrimidine symmetry net which is as the core symmetry common for all, more than thirty different nuclear and mitochondrial genetic codes. This net is present in the SSyGC table of all RNA and DNA living species. None of these symmetries is present in the Standard Genetic Code (SGC) table which is constructed on the alphabetic horizontal and vertical U-C-A-G order of bases. Here we show that the free energy value of each codon incorporated as fundamentally mapping the “energy code” in the SSyGC table is compatible with mirror symmetry. On the other hand, in the SGC table the same free energy values of codons are dispersed and a mirror symmetry between them is not recognizable. At the same time the mirror symmetry of the SSyGC table and the DNA quadruplets together with our classification of codons/trinucleotides are perfectly imbedded in the mirror symmetry energy mapping of codons/trinucleotides and point out in favor of maintaining the integrity of the genetic code and DNA genome. We also argue that physicochemical symmetries of the SSyGC table in the manner of the purine – pyrimidine symmetry net, the quadruplet symmetry of DNA molecule and the free energy of codons have remined unchanged during all of evolution. The unchangeable and universal symmetry properties of the genetic code, DNA molecule and energy code are decreasing disorder between codons/trinucleotides and shed a new light on evolution. Diversity in all living species on Earth is broad, but the symmetries of the Supersymmetry Genetic Code as the code of life and the DNA quadruplets related to the” energy code” are unique, unchangeable and have the power of natural laws.

Sleep-disordered breathing affects the growth and development, mental aspect, and learning ability of affected children. Postoperative scarring causes anteroposterior and vertical develop-mental disorders of the maxilla. Obstructive apnea is likely to occur due to the influence on the maxillofacial and airway morphology. In this study, we investigated the sleep-respiratory dynamics of school-aged children with unilateral cleft lip and palate by performing a simple over-night sleep study, maxillofacial morphology and airway analysis using lateral cranial radiographs, and model analysis. Children with unilateral cleft lip and palate showed a significantly higher respiratory event index (REI) than normal children; the maxilla was located in the posterior position in terms of maxillofacial morphology, and airway morphology showed narrow values for all distance measurement items. Moreover, the width and length of the dental arch and the width of the alveolar base arch were significantly smaller. Furthermore, there was a negative correlation between REI and SNA, ANB, REI, and alveolar base arch width. Children with unilateral cleft lip and palate are more likely than normal children to develop sleep-disordered breathing due to in-creased airway resistance caused by undergrowth of the maxilla and narrowing of the upper airway and oral volume.

Micro-nanoparticles' characteristics in geothermal fluids can be applied to detect of deep hidden geothermal resources. Observations using a nanoparticle tracking analyzer (NTA) indicated that the karst geothermal water collected in the central area of Shandong Province (Jinan and Zibo) contains many natural micro-nanoparticles with sizes primarily ranging between 100 nm and 5 μm. The micro-nanoparticles’ type, shape, crystal form, and chemical composition in the samples were analyzed using transmission electron microscopy (TEM). TEM images and energy dispersive spectroscopy showed that the micro-nanoparticles in geothermal water samples were mostly amorphous, irregular, or nearly spherical, with rough edges. The micro-nanoparticles were mainly carbonates, sulfates, and chlorine-containing Fe, Ca, Na, and Mg. The characteristics of the particles can reveal the properties of the deep, hot reservoirs and aquifers from where they originate. Therefore, we believe that natural micro-nanoparticles can be essential to detecting and studying deep, hidden geothermal resources, which is a novel approach to exploring deep, hidden geothermal resources.

The Savu Sea holds significant importance as a conservation area in Indonesia, providing sustenance and livelihoods for local communities. It is situated within the Coral Triangle, a critical hotspot for marine biodiversity worldwide. However, the Savu Sea is currently facing various threats, including overfishing, pollution, and the impacts of climate change. Effective management of this conservation area relies heavily on the active participation of local communities. Therefore, this study aims to address this issue by analyzing how factors within these communities, such as the socio-economic condition of coastal households, environmental awareness, the existence of community-based conservation areas, attitudes towards activities within the conservation area, and participation in multistakeholder institutions, contribute to a positive perception of the benefits provided by the Savu conservation area. To determine the complex causal conditions that influence the outcome of perception, the study employs the Qualitative Comparative Analysis (QCA) method, specifically using crisp set QCA (csQCA). A survey was conducted among 22 coastal villages surrounding the Savu Sea, resulting in the identification of 14 different combinations of pathways that contribute to varying levels of perception regarding conservation. Valuable lessons can be drawn from this study to enhance the design of policies aimed at effectively managing the Savu conservation area.

Applying the improved social network analysis method and the idea of rolling window regression, this paper explores the impact of HSR network on the quality of urbanization and its dynamics. Based on a sample of 273 cities in China over 2009–2019, we find that the high-speed railway network has an increasing positive effect on the quality of urbanization, which proves the existence of network effect. The empirical results further show that this effect is closely related to the cov-erage rate of high-speed rail network. In addition, heterogeneity analysis reveals that urban ag-glomeration cities are the main beneficiaries. Academically, our study provides a plausible expla-nation and evidence from network size differences for the two conflicting views of the HSR effect. Practically, we also propose some important policy implications for countries in different high-speed rail network construction stages.

Data Extraction is a technique is called as clustering which is used to retrieve data either from the files or data bases or both. This paper focuses on the performance evaluation parameters of the clustering algorithms based on different parameters or conditions or constraints and parameters which are used to perform the clustering process to get the clusters on the data sets. Therefore best clusters are retrieved when best parameters or conditions or constraints or preferences which are applied on the data sources for the clustering process. These parameters or conditions or constraints are opted by the user called as user preferences.

People often make mistakes, so we try to automate every aspect of our lives. Sports is no exception. While just over a decade ago humans were analyzing games, today this is being done by artificial intelligence. Due to rapid development over the past decade, neural networks are now faster, more accurate, and in some areas even better than their human counterparts. In this paper, we present an algorithm that can detect player statistics during an NBA broadcast. It also helps users better understand the game and the use of augmented reality. The algorithm detects players on the court, tracks their movements, and assigns them to their respective teams. Using homography estimation, we transform the players’ positions from a three-dimensional space in the video to a two-dimensional space on the playing field plane. We define a new algorithm that predicts the players’ actions and their statistics. The results show that the proposed method can effectively identify the players, their respective teams, and their positions. It can also analyze their actions with high accuracy.

In this study, a novel two-layer control scheme aimed at enhancing the dynamic performance of a nonlinear vehicle through the utilization of an optimal control approach grounded in predictive control principles is presented. The first layer of our control system focuses on the computation of an optimized rotational torque that ensures lateral dynamic stability. This torque is subsequently translated into differential forces acting on the wheels, employing the inverse tire model to derive the desired longitudinal slips. These slip values are then transmitted to the second layer of our control system. In the second layer, the electric motors associated with the vehicle's wheels dynamically adjust the input torque to accurately track the desired slip, thereby ensuring the overall stability of the electric vehicle. In view of the paramount importance of energy consumption in electric vehicles, we adopt optimal control strategies to substantially minimize battery utilization. To this end, careful selection of appropriate weighting coefficients in the control laws enables us to maintain the electric motors within their permissible operational range while simultaneously minimizing battery energy consumption for desired slip tracking. Extensive simulation results validate the effectiveness of our proposed control system in proficiently managing nonlinear effects and safeguarding the vehicle's stability.

In an ever-evolving landscape of higher education institution, the College of Arts and Sciences at St. Michael's College, Iligan City, Philippines, embarked on a strategic journey to navigate the challenges and opportunities of the post-pandemic era. This study, conducted in August 2022, delves into the multifaceted dimensions of their strategic planning processes. Through qualitative methods that use intensive in-depth reviews of literature, informal interviews, observation, and thematic analysis, this research unveils a narrative of adaptation, innovation, and internationalization. It explores how the institution resiliently adapted to the COVID-19 pandemic, leveraged technological advancements to enhance educational delivery, fostered interdisciplinary collaboration at the nexus of arts and sciences, and embraced internationalization through partnerships and cultural exchange. Anchored in a robust theoretical framework, this study resonates with broader trends in higher education, echoing the global call for agile, student-centric, and forward-thinking institutions. As this institution's journey unfolds, its experiences and lessons resonate with academic leaders, administrators, faculty, students, and stakeholders, inviting reflection and dialogue on the future of higher education.

Considering the aging society and budget constraints, a strategy for reforming public transportation welfare policies is essential for sustainability. Among the various transportation welfare policies, fare discount policies are provided to specific age groups, and most countries offer benefits to several public transportation. South Korea provides a fare-free policy limited to subways, and the need for policy modification is emerging due to sustainability problems caused by an aging society. Hence, the scope of the policy should be expanded to all travel modes, but the discount rate should be reduced, or the target group should be reduced in consideration of the budget. This study proposes a travel mode to focus on by city through the preference of the elderly. The latent class model is employed to classfy stated preference data collected from the survey. The estimation results show a significant preference heterogeneity depending on the level of subway supply by region, and a policy focused on subways would be more reasonable in cities with sufficient subway infrastructure. Hence, regarding sustainability, it may be more appropriate to focus on specific means than to provide the same discount policy for all public transport.

The accessibility of public transportation is also known as the last mile problem, and it is one of the main obstacles that affect travelers to choose public transport. Although autonomous vehicles (AVs) have made much progress, they have not been officially put into commercial use. This paper adopts stated preference experiments to explore the impact of shared AVs on train trips’ last-mile travel behavior and takes Wuhan as an example for case analysis. First of all, this paper establishes a structural equation model (SEM) based on the theory of planned behavior to explore the latent psychological variables, including travelers’ attitudes (ATTs), subjective norms (SNs), perceived behavior control (PBC), and behavioral intention to use (BIU) toward AVs. These latent psychological variables are incorporated into the latent class (LC) logit model to establish a hybrid model to study the factors and degree of influence on the travel mode choice for the last mile of train trips. The results show that travelers have preference heterogeneity for the travel mode choice of the last mile of train trips. Through the analysis of LCs, education, career, and income significantly impact the classification of LCs. The latent psychological variables towards AVs have a significant impact on the travel behavior of respondents, but the impacts vary among different segments. Elastic analysis results illustrate that a 1% increase in the travel cost for shared AV in segment 1 leads to a 7.598% decrease in the choice probability of shared AV. Respondents from different segments vary significantly in their willingness to pay, and the value of travel time for high-income groups is relatively higher.

Modeling and assessing the sustainability of machining systems has been considered to be a crucial approach to improving the environmental performance of the machining processes. As the most common machining system, the computer numerical control (CNC) milling system is a typical man-machine cooperative system where the activities of the machine tool and operator generate material and energy consumption. However, the energy consumption of the operator in the CNC milling system has often been ignored in most existing research. Therefore, existing methods fail to provide a comprehensive understanding of the sustainability of the CNC milling system. To fill this gap, an exergy loss assessment method is proposed to investigate the sustainability of the CNC milling system, where the energy consumption of the operator, the energy consumption of the machine tool, and material consumption are taken into consideration. The key performance indexes of the energy consumption of the operator, the energy consumption of the machine tool, the exergy loss, and the specific exergy loss (SEL) are analyzed and modeled. To demonstrate the feasibility of the proposed method, a case study was carried out on a three-axis machining center (XH714D), in which SEL was found to be 88.04J/mm3. The proposed method is effective to assess the sustainability of the CNC milling system, and the established exergy loss models build a good basis for exergy efficiency optimization.

Activities in the digital economy driven by information technology have rapidly increased in scope and speed in the aftermath of COVID-19. Meanwhile, social isolation accelerated by quarantine measures has increased concerns about individuals’ mental health. However, little is known about the specific consequences of online interactions, especially when applied in online fan community-based relationships where loyal community members are prevalent. Therefore, we examined whether a sense of virtual community (SOVC) can link fans’ online activities with their mental well-being and behavioral loyalty to the platform. For this purpose, we focus on BTS fandom “Adorable Representative MC for Youth” (ARMY) behaviors and attitudes on the fan community platform Weverse. With 202 valid data samples acquired from global ARMY, this study conducted a partial least squares–structural equation modeling analysis. The empirical findings reveal that SOVC in Weverse is significantly influenced by the intensity of online interactions with other fans and parasocial relationships with celebrities. SOVC is found to be the direct predictor of fans’ behavioral loyalty and mental well-being. When considering fans’ perceptions of other social media platforms, dissatisfaction with previous online fan communities enhances the intensity of online interactions with other fans in Weverse.

In these times, consumers mistakenly believe that the terms “expiration date” and “best before” found on packages only convey information about food safety. Consequently, a misunderstanding of these terms contributes to food waste. In this sense, the understanding and behavior of the con-sumer with respect to the two terms were evaluated; in addition, the consumer's perception of the health risks of consuming expired food was analyzed. The research was carried out with the population of the sector of Lurigancho-Chosica, Lima – Peru; sample size was 555 participants. An online survey was sent to consumers over 18 years of age, from different sociodemographic and socioeconomic conditions. In general terms, it was found that 45% (p <0.01) consider that both terms mean the same thing, this result is a problem for food safety. The 67% (p <0.05) and 45% (p <0.05) correctly defined the first and second terms, respectively; however, the behavior is not coherent with the understanding of the terms. In addition, irrational and dangerous behavior toward expired food was evidenced, i.e., they consume expired food - "expiration date", and discard expired food - "best before". Finally, the health risks they perceived from consuming expired foods of both terms were: upset stomach, vomiting, gas, intoxi-cation, and malnutrition; these perceptions are erroneous and unfounded. Sociodemographic and socioeconomic conditions influence the under-standing, behavior, and perception of health risks. Therefore, in general lines, the level of understanding of the terms was low (p<0.01), the be-havior was inappropriate toward expired food (p<0.01), and the percep-tion of the health risk of consuming expired food was incorrect (p<0.01).

In 2020 the world experienced the threat of the COVID-19 epidemic, as seniors and chronic disease patients typically try to reduce their exercise and social activities to avoid increasing the risk of infection, which could lead to increased loneliness and even many diseases. This research combining golf croquet games with AIoT companion robots constructs a home-based intelligent exercise system thus uses the Technology Acceptance Model (TAM), deduces users’ intention to use this system based on perceived usefulness and perceived ease of use, and adds the needs of love and belonging, esteem, cognitive, aesthetic, and self-actualization in Maslow’s needs theory to conduct system needs analysis. The analysis results show that participants have a high level of acceptance of this system, believing that it is easy to learn and operate, can increase interaction with others, also found that this system can improve self-confirmation, satisfying the third for knowledge, feeling happy, and self-actualization needs are easier to fulfill. In the future, we shall collect and record the seniors in the process of use, so as to find out their health problems as soon as possible, expand their daily life through this exercise, and achieve the goal of happy living and health care.

Abstract: The traditional model of closed circuit ball milling systems has been used for several decades, however, if the classifier of the closed circuit ball mill system performs the duties of both pre-classification and check-classification, the characterization error of the traditional model is large. To address this problem, a new model is obtained by modifying and supplementing the traditional one. The most important feature of the new model compared to the traditional model is that the circulating load is considered to be the fresh feed for the entire system rather than the ball mill. The error between the slurry level height calculated using the traditional model and the actual is 52.31%, which is 13.77 times higher than that of the new model. When the relative capacity varies greatly, that of the ball mill calculated by the traditional model fluctuates between 0.95 and 1.15, while the new model is 0.6 to 1.4. The new model has a higher accuracy than the traditional model in characterizing the production status of the grinding system, which is of some significance for industrial production.

Jabulile Ndlovu1 and Kebogile Mokwena1, 2 1 Department of Public Health, Sefako Makgatho Health Sciences University, Pretoria, South Africa 2 Research Chair in Substance abuse and population Mental Health, Sefako Makgatho Health Sciences University, Pretoria, South Africa Corresponding author: [email protected] Abstract An estimated 6% of the world population has serious mental illness, with one in four families having a member with some form of psychiatric disorder, who are mostly cared for by their relatives within a family setting. Although caregiving in a home setting is reported to be associated with significant mental distress, the burden of such distress is rarely measured. The purpose of this study was to quantify the burden of care among family caregivers of relatives with serious mental disorders, as well as to explore possible association between the caregiver burden of care and a range of caregiver and Mental Health Care User (MHCU) variables in a rural district in Kwa-Zulu Natal, South Africa. The Zarit Burden Interview (ZBI) scale was used to collect data from 357 caregivers, and STATA 14 was used to analyze data. The ages of the sample ranged from 18 to 65, with a mean of 50.29, and the majority (86%) were female and unemployed (83%). The ZBI scores ranged from 8 to 85, with a mean of 41.59. The majority (91%) tested positive for caregiver burden of care, which ranged from mild to severe. Using the Pearson Chi-square test of association (p=0.05), variables that were significantly associated with the burden of care were clinically related (caregiver self-reported depression, MHCU diagnosis, recent relapse of the MHCU), socio-economic (caregiver family monthly income, MHCU disability grant status and MHCU employment status) and socio-demographic (MHCU gender and MHCU level of education). The prevalence of burden of care is high and severe, and scarcity of resources in families and communities contribute to the high burden of care in these rural communities.

We assessed the use of Evidence-Based Practice (EBP) among pharmacists working in community pharmacies in France, and the factors linked to this practice. During 3 months in 2018 an online survey was sent to over 7,000 active pharmacists, and posted on pharmacist social media sites. The 40-item questionnaire described four clinical cases reflecting typical situations (conventional med-icine and Complementary and Alternative Medicine) encountered daily by community pharma-cists. Multiple-choice responses were proposed and scored according to whether they reflected EBP. A high total score indicated behavior in line with EBP. Univariate and multivariate analyses were used to evaluate factors that might explain adherence to EPB (pharmacy’s characteristics, the pharmacist’s status, mode of continuing education and sources of information). 595 pharmacists completed the questionnaire. The majority relied on pharmaceutical industry and other biased and/or non-evidence-based sources, particularly concerning information on homeopathic products. The consultation of independent reviews, health agency recommendations, and peer-reviewed scientific journals, was associated with evidence-based decisions. In contrast, reliance on phar-maceutical industry documents, personal experience and informal handbooks was linked to lower EBP scores. The level of EBP use by French community pharmacists needs to be improved to ensure that good quality scientifically-based advice is given to customers.

The recent years various, there huge interest to improve the efficiency of smart electronic and optoelectronic devices via developing emerging materials and printing technologies. However, printing technologies becomes one of the most interesting areas for researcher over a convenient coating method because it not only helps to improve the efficiency of device but also help for rapid, reproducible, and low-cost production which open as a new window for mass production for commercial use. Inkjet printing technology has become the most attractive among various printing technologies due to which it is acceptable in most of scientific and various of industrial applications. This review paper presents an overview of the investigations on formulation of the ink, fabrication, and the applications of conductive polymer via inkjet printing for variety of devices including supercapacitors, sensors, electrochromic devices, and patterning of conductive polymers on flexible substrates. The review covers the different conducting polymer explored for supercapacitors, sensors, electrochromic devices, and patterning of conductive polymers, their ink formulation, inkjet printing process and their keys features. This review also presented future perspectives for inkjet printing technology for advanced electronic, optoelectronic, and other conductive polymer-based devices. We believe this review provides new direction to next generation conductive polymer-based devices for various applications.

Initially introduced almost thirty years ago for the express purpose of providing electronic warfare systems the capabilities to detect, characterize, and identify radar emitters, Specific Emitter Identification (SEI) has recently received a lot of attention within the research community as a physical layer technique for securing Internet of Things (IoT) deployments. This attention is due in large part to SEI’s demonstrated success in passively and uniquely identifying wireless emitters using traditional machine learning and the success of Deep Learning (DL) within the natural language processing and computer vision areas. SEI exploits distinct and unintentional features present within an emitter’s transmitted signals. The existence of these distinctive and unintentional features is attributed to slight manufacturing and assembly variations that exist within and between the components, sub-systems, and systems that comprise an emitter’s Radio Frequency (RF) front end. Although sufficient to facilitate SEI, these features do not hinder normal operations such as detection, channel estimation, timing, and demodulation. However, despite the plethora of SEI publications, it has remained largely a focus of academic endeavors that primarily focus on proof-of-concept demonstration and little to no use in operational networks for various reasons. The focus of this survey is a review of SEI publications from the perspective of its use as a practical, effective, and usable IoT security mechanism, thus we use IoT requirements and constraints (e.g., wireless standard, nature of their deployment) as a lens through which each reviewed paper is analyzed. Previous surveys have not taken such an approach and have only used IoT as motivation, a setting, or a context. In this survey, we consider operating conditions, SEI threats, SEI at scale, publicly available data sets, and SEI considerations that are dictated by the fact that it is to be employed by IoT devices or IoT infrastructure.

Organophosphate pesticides (OPs) are toxic substances that contaminate aquatic environments, interfere with the development of the nervous system, and induce Neurodevelopmental Toxicity (NDT) in animals and humans. The canonical mechanism of OP neurotoxicity involves the inhibi-tion of acetylcholinesterase (AChE), but other mechanisms non-AChE are also involved and not fully understood. We used network toxicology and molecular docking to identify molecular targets and toxicity mechanisms common to OPs. Targets related to diazinon-oxon, chlorpyrifos oxon, and paraoxon OPs were predicted using the Swiss Target Prediction and PharmMapper databases. Targets related to NDT were compiled from GeneCards and OMIM databases. In order to construct the protein-protein interaction (PPI) network, the common targets between OPs and NDT were imported into the STRING. Networks topological analyses identified EGFR, MET, HSP90AA1, and SRC as hub nodes common to the three OPs. Using Reactome pathway and gene ontology we found that signal transduction, axon guidance, cellular responses to stress, and glutamatergic signaling activation play key roles in OP-induced NDT.

The spread of SARS-CoV-2 variants of concern (VOCs), is of great importance to the whole community, since their genetic changes may increase transmissibility, disease severity and reduce effectiveness of vaccines. Moreover, these changes may lead to failure of diagnostic measures, thus variant-specific diagnostic methods are essential. To date, genetic sequencing is the gold standard method to discriminate between variants, however it is time consuming (several days) and expensive. Therefore, the development of rapid diagnostic methods for SARS-CoV-2 in accordance with its genetic modification is of great importance. In this study, we introduce a Mass-Spectrometry (MS)-based methodology for the diagnosis of SARS-CoV-2 in clinical specimens, a methodology which enables universal identification, alongside with variant-specific discrimination. The universal identification of SARS-CoV-2 is based on conserved markers shared by all variants, while the identification of the specific variant relies on variant-specific markers. Determining a specific set of peptides for a given variant consists of a multistep procedure, starting with in-silico search for variant-specific tryptic peptides, followed by tryptic digest of a cell-cultured SARS-CoV-2 variant and identification of these markers by HR-LC-MS/MS analysis. As a proof of concept, this approach was demonstrated for four representative VOCs, in comparison with the wild-type Wuhan reference strain. For each variant, at least two unique markers, derived mainly from the spike (S) and nucleocapsid (N) viral proteins, were identified. This methodology is specific, rapid, easy to perform and inexpensive, therefore can be applied as a general diagnostic tool of pathogenic variants.

Steroid-responsive meningitis-arteritis (SRMA) is a predominantly Th-2 immune-mediated dis-ease, but exact pathomechanism remains still unclear. Interleukin-31 (IL-31) is predominantly produced by T cells with a Th-2 phenotype during proinflammatory conditions. We hypothesize, IL-31 might be involved in the pathogenesis of SRMA. IL-31 was measured in archived samples (49 serum and 52 CSF samples) of dogs with SRMA, Meningoencephalitis of unknown origin (MUO), infectious meningoencephalitis, atopic dermatitis and of healthy control dogs using a competitive canine IL-31 ELISA. Mean serum IL-31 level in dogs with SRMA (n=18) was mildly higher compared to dogs with atopic dermatitis (n=3) and MUO (n=15) and markedly higher than in healthy controls (n=10) and dogs with infectious meningoencephalitis (n=3). Dogs with SRMA in the acute stage of the disease and without any pre-treatment had the highest IL-31 levels. The mean CSF IL-31 value of dogs with SRMA (n=23) was quite similar to healthy controls (n=8) and did not differ significantly from dogs with MUO (n=19) and infectious meningoencephalitis (n=2). Based on this study, an involvement of IL-31 in the pathogenesis of the systemic Th-2 im-mune-mediated immune response in SRMA can be assumed as a further component leading to an aberrant immune reaction.

This paper bases on panel data from 30 provinces and municipalities in China spanning the period of 2010 to 2021 to examine the evolving mechanisms and influencing factors of agricultural product circulation efficiency in the provinces along the Belt and Road Initiative (BRI) within the context of green total factor productivity (TFP). The study research employs various methodologies including the SBM-DDF model, GML index, system GMM, and global Moran's I index. The findings are as follows: Initially, the provinces along the BRI exhibit an overall negative growth trend in the green TFP of agricultural product circulation, with a noticeable decline observed particularly after the initiation of the BRI in 2014. Secondly, foreign investment levels significantly contribute to the positive enhancement of green TFP in agricultural product circulation among the provinces along the BRI. Eventually, environmental regulations, government support, and the level of international trade in agricultural products exert significant negative impacts. Thirdly, the results of spatial effect tests reveal substantial spatial spillover effects in the green TFP of agricultural product circulation among the provinces along the BRI, as demonstrated through examinations utilizing three distinct spatial matrices.

(1)Background:The purpose of the study was conducted to investigate the recovery of heart rate according to the performance level and rest interval conditions during 65%1RM bench press exercise;(2)Methods:The subjects of this study were eight healthy male college studentsin their 20 (years) attending University C. 1RM was measured before theexperiment, and the exercise sequence of six rest intervals (30sec, 1, 2, 3, 4,5min) was randomly selected and cross-distribution experiment. The experimental measurement was conducted a total of six times according to the rest interval condition (six conditions) once every 3 days to minimize the learning effect. The data was verified with repeated measures Two-way ANOVA and Contrast's repeated method was applied for post-comparison;(3)Results: First, the amount of exercise and the number of repetitions statistically substantially dropped (p&lt;.001) as the number of sets rose, and a greater decline was shown when the rest periods got shorter. Second, the heart rate after exercise was increased significantly (p&lt;.01) as the set progressed in the long rest interval conditions (4, 5min), and the heart rate after rest was increased statistically significantly (p&lt;,05) as the set progressed in the short rest interval conditions (30sec, 1min). Third, the heart rate recovery rate (%) was able to perform more repetitions than in the short rest interval condition due to the relatively high physiological recovery of the neuromuscular and circulatory system under the long rest interval condition;(4)Conclusions: Therefore, according to the rest conditionduring the 65%1RM bench press exercise conducted in this study, the restinterval condition of 2~3min may be effective in improving muscular endurance,and the rest interval condition of 4~5min may be effective in improving muscular hypertrophy. As a result of this study, there was a significant difference in exercise performance (repetition) and physiological recovery depending on the rest interval condition according to the set progress during the same intensity resistance exercise. Through this, it is judged that it is possible to adjust the amount of exercise appropriate for the purpose of training by adjusting not only the intensity during resistance exercise but also the rest interval between sets.

Deep brain stimulation (DBS) is an effective and safe medical treatment that improves the lives of patients with a wide range of neurological and psychiatric diseases, and has been consolidated as a first-line tool in the last two decades. Closed loop deep brain stimulation (CLDBS) pushes this tool further by automatically adjusting the stimulation parameters to the brain response in real-time. This paper presents a CLDBS with 2 stimulation channels and 2 acquisition channels. Each channel has a low-noise amplifier (LNA) buffer in differential configuration to eliminate the DC signal component of the input. Energy management is efficiently done by the control and communication unit. The battery supports almost 9 hours with both the acquisition and stimulation circuits active. If only the stimulation circuit is used as an Open Loop DBS (OLDBS), the battery can hold sufficient voltage for 24 hours of operation. The whole system is low-cost and portable and therefore it could be used as a wearable.

Concern about the planet's future has motivated governments around the world to adopt policies that promote more responsible energy consumption. Reducing emissions of the principal cause of climate change man-made greenhouse gases requires greater system efficiency and the utilization of renewable energy sources. The generation of electricity is the single largest source of hazardous pollutants, followed by the transportation sector. This is true due to the extreme reliance on petroleum and its derivatives that these industries have. Electric mobility is receiving more attention from businesses, governments, and academic institutions as a means to reduce the negative impacts of current energy consumption. Without measures to address common technical issues, electric vehicles would strain electrical infrastructure. In order to determine the best strategy for switching operations and feeder reconfiguration, this research presents a helpful hybrid genetic algorithm particle swarm optimization (HGAPSO) method. Meet transmission limits while decreasing real power losses and enhancing the system's bus voltage profile. The effects of HGAPSO on power losses and voltage distributions in the network are analyzed. Then, a report is produced contrasting GA and PSO. This cross-breeding of GA and PSO led to HGAPSO. This important problem can be solved more effectively with the use of new or improved algorithms. To find the optimal reconfiguration and properly rearrange transmission network interconnection, it employs a plethora of heuristic optimization algorithms. The objective is to limit bus voltage variations while maintaining the system's radial topology and minimizing power usage. The reliability and performance of the procedure were evaluated using MATLAB's IEEE 33-bus communication network. The outcomes demonstrate the effectiveness of the proposed technique, which cuts down on power waste during standalone runs and speeds up the processing time.

Euphorbia ingens is traditionally used to treat and manage cancer in Ambeere community of Embu County in Kenya. Whilst research has demonstrated the bioactivities of E. ingens including antimicrobial, antitubercular and antifungal activities, scientific validation of its anticancer properties is limited. This study evaluated the antiproliferative potentials of E. ingens on human prostate cancer cell line (DU-145). The 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide assay was used to assess the antiproliferative activity, chemical constituents were analysed by qualitative colour method and Gas Chromatography-Mass Spectrometry analysis. At the same time, the investigation of putative molecular targets and mechanisms of action of E. ingens was done through network pharmacological analysis. Reverse transcription-quantitative polymerase chain reaction (RT-qPCR) was carried out to validate the network predictions of putative targets. Our result showed E. ingens ethyl acetate inhibited DU-145 growth (IC50 of 9.71 ± 0.4 µg/ml) with a high selectivity index of 8.26. There was the presence of phenols, terpenoids, flavonoids, tannins, sterols, and saponins; additional 18 compounds were identified by the GC-MS approach. ESR1, IL6, MMP9, CDK2, MAP2K1, AR, PRKCD, CDK1, CDC25B, and JAK2 were indicated as key targets of E. ingens against prostate cancer with the PI3K-AKT, MAPK, and p53 signalling pathways identified as the most probable mechanisms of action. There was significant downregulation of AR and BCL2, and upregulation of p53 and caspase-3 in E. ingens-treated DU-145 cells compared to 0.2 % DMSO negative control. Our results suggest that E. ingens has phytochemical compounds efficacious at inhibiting the proliferation of DU-145 cells; therefore, the plant can be considered a potential source of compounds that may be used to manage and treat prostate cancer; however, further in vivo evaluations are needed.

Novel TFN membranes were examined for the removal of heavy metals (Cu and Pb) from synthetic wastewater in forward osmosis (FO) experiments using MgCl2 as a draw solute. The TFN membranes were fabricated on top of a commercial PS35 ultrafiltration membrane by in-situ interfacial polymerization of piperazine (PIP) and 1,3,5-benzenetricarbonyl trichloride (TMC) containing different amounts of dispersed functionalized halloysite nanotubes (HNTs) nanoparticles. The HNTs nanoparticles were functionalized with the first generation of poly(amidoamine) (PAMAM) dendrimers. The TFN and the control TFC membranes showed rejections of Cu2+ and Pb2+, ranging from 94.5% to 98.1%. The presence of heavy metal in the feed solution enhanced the FO performance of all membranes. In particular, the reverse flux of MgCl2 decreased at least 2.5 times compared to the experiments with pure water as a feed. Simultaneously, the water flux also increased. The improved FO performance of the membranes in the presence of heavy metal ions is attributed to their adsorption by the membranes. The adsorption of heavy metals was confirmed by a decrease in the negativity of zeta potential and the results from inductively coupled plasma mass spectrometry (ICP-MS) of the membranes after the FO experiments.

With the spread of compulsory education emerged school management problems continued, and the quality of school management in compulsory education has attracted a great deal of attention in China. However, the application of information technology in the field is not yet detailed and wide, resulting in problems of heavy workload and high difficulty in the whole evaluation process. Accordingly, we use big data technologies such as Apache Spark, Apache Hive, and SPSS to carry out data cleaning, correlation analysis, dynamic factor analysis, principal component analysis, and visual display on 1760 sample data from 40 primary and secondary schools in Q Province in China, and constructs a model school management of quality evaluation in the compulsory education stage, which reduces the 22 management tasks required for previous evaluation to 5, greatly reducing the workload and difficulty of evaluation. It has improved the efficiency and accuracy of evaluation, and further promoted the simultaneous development of education of five domains and education equity in the compulsory education stage.

A balanced diet model, rich in fruits and vegetables and ensuring the intake of natural products, has been shown to reduce or prevent the occurrence of many chronic diseases. However, the choice to consume large quantities of fruits and vegetables leads to an increase in the amount of waste, which can cause the alteration in environmental sustainability. To date, the concept of "by-product" has evolved, understood as a waste product, from which it is still possible obtain useful compounds. Therefore, the by-products in the agricultural sector, are a rich source of bioactive compounds, capable to possess a second life, decreasing the amount of waste products, the disposal costs and the environmental pollution. A promising and well-known citrus of the Mediterranean diet is the bergamot (Citrus bergamia, Risso et Poiteau). The composition of bergamot is known and the rich presence of phenolic compounds and essential oils has justified countless beneficial properties found, including anti-inflammatory, antioxidant, anti-cholesterolemic and protective activity for the immune system, heart failure and coronary heart diseases. The industrial processing of bergamot fruits leads to the formation of bergamot juice and bergamot oil. The solid residues, referred as "pastazzo", are normally used as feed for livestock or pectin production. The fiber of bergamot (BF) can be obtained from pastazzo and could exert an interesting effect thanks to its content of polyphenols. The purpose of this work was to test the effects of BF on an in vitro model of neurotoxicity induced by treatment with amyloid beta protein. In particular, this experimental model included both neurons and oligodendrocytes in order to measure the involvement of the glia and compare it with the neurons one. The results obtained showed a protective activity of BF, although the oligodendrocytes were more sensitive and fragile than neurons. Further experiments are necessary and if the trend was confirmed, solid residues of bergamot could be used in AD, and, at the same time, could help to avoid the accumulation of waste products.

The metro station ridership features are associated significantly with the built environment factors of the pedestrian catchment area surrounding metro stations. The existing studies have focused on the impact on total ridership at metro stations, ignoring the impact on varying patterns of metro station ridership. Therefore, the reasonable identification of metro station categories and built environment factors affecting the varying patterns of ridership in different categories of stations is very important for metro construction. In this study, we developed a data-driven framework to examine the relationship between varying patterns of metro station ridership and built environment factors in these areas. By leveraging smart card data, we extracted the dynamic characteristics of ridership and utilized hierarchical clustering and K-means clustering to identify diverse patterns of metro station ridership, and finally identified six main ridership patterns. We then developed a new built environment measurement framework and adopted multinomial logistic regression analysis to explore the association between ridership patterns and built environment factors. (1) The clustering analysis result revealed that six station types were classified based on varying patterns of passenger flow, representing distinct functional characteristics. (2) The regression analysis indicated that diversity, density, and location factors were significantly associated with most station function types, while destination accessibility was only positively associated with employment-oriented type station, and centrality was only associated with employment-oriented hybrid type station. These results could inform the coordinated development of rail transit and land use, and the renewal and enhancement of the built environment in the pedestrian catchment area surrounding metro stations.

The purpose of this work was to evaluate a novel methodology developed by Digital Blood Corporation (DBC) to calculate critical blood values using four non-invasive measured values as input. The values obtained using a point-of-care testing (POCT) device were utilized for comparison and reference. Radial arterial blood was collected for the POCT comparator analysis using the Abbott i-STAT^® device. The non-invasive methodology from DBC requires four parameters to be directly measured: temperature, hemoglobin, pO2, and pCO2. Subsequently, sodium, potassium, chloride, ionized calcium, total carbon dioxide, pH, bicarbonate, and oxygen saturation are calculated using an algorithm. The agreement between the POCT and DBC’s methodology was analyzed using Bland-Altman difference plots. For a second data set, pO2 and pCO2 values collected with the POCT were used as input for DBC’s algorithm to test its robustness. Data from 37 healthy ambulatory individuals, mean age: 42.4 + 13 years; range: 18-64 years, were included in the primary analysis. In the case of the non-invasive gained four input values the greatest variation between POCT and DBC’s approach was observed for pO2 and consequently for algorithm values that depend upon pO2 precision. Replacing transcutaneous pO2 and pCO2 with POCT values demonstrates the principal ability of DBC’s algorithm to predict the additional 8 blood values in sufficient agreement with a standard POCT device in healthy patients. The algorithm developed by DBC appears to be robust in the case of healthy patients but does need the four measured input values with preciseness comparable to a POCT device to give reliable and clinically relevant results. The present study thus serves as a proof of concept to facilitate future study and further development of this methodology into a non-invasive device.

Coronavirus disease (COVID-19) has had devastating impacts on the global economy and public health. This study aimed to assess the level of COVID-19 vaccine acceptance, hesitancy, and associated factors among staff and students of the Federal University of Health Sciences Otukpo, Benue State, Nigeria. A web-based cross-sectional survey was conducted between November 2021 and April 2022, and data were collected and analyzed using descriptive and inferential statistics. Of the 150 completed and analyzed questionnaires, the majority of respondents (80.0%) were between 16 and 45 years old. The study found that 58.4% of participants indicated vaccine hesitancy, with skepticism about the vaccine's fast production/rollout and fear of vaccine side effects being the most common reasons for hesitation. Respondents' age, religion, and category were significant factors influencing vaccine acceptance and hesitancy (P < 0.05). The university community has a high level of awareness of COVID-19 but low vaccine acceptance, resulting in high levels of vaccine hesitancy. The study recommends that policymakers and public health officials should prioritize testing and vaccination for job categories with higher risk of exposure to COVID-19. They should provide accurate information about COVID-19 testing and vaccination and implement workplace-based testing and vaccination programs. These interventions can help to increase COVID-19 testing and vaccination uptake among the university community and mitigate the spread of COVID-19.

In this review, we aimed to understand the relationship between SARS-CoV-2 infection and preeclampsia severity in infected pregnant women. Pregnant women with SARS- CoV-2 infection have been shown to have a significantly increased risk of maternal death, ICU admission, preterm delivery, and stillbirth compared with those without infection. The risk of preeclampsia also increases in pregnant women infected with SARS-CoV-2, particularly in those with severe symptoms. We emphasize the im-portance of specialized clinical management to prevent poor pregnancy outcomes in this situation. The association between COVID-19 and preeclampsia (PE) is likely due to multiple mechanisms, including the direct effects of the virus on trophoblast function and the arterial wall, acute atherosis, local inflammation leading to pla-cental ischemia, exaggerated inflammatory responses in pregnant women, SARS-CoV-2-related myocardial injury, cytokine storm, and thrombotic microan-giopathy. Emphasis has been placed on the potential impact of COVID-19 on pregnant women, specifically in relation to thrombotic complications, placental dysfunction, and cardiovascular dysfunction. Undoubtedly, one of the diagnostic tools to differentiate between COVID-19-induced preeclampsia-like syndrome and true preeclampsia is the use of biomarkers, such as the sFlt-1/PlGF ratio. We wish to highlight the potential for COVID-19-induced myocardial injury in pregnant women and the associated in-crease in maternal mortality rate. Vaccination against COVID-19 in the general population and in pregnant women in particular, drastically reduced the severity of the disease. There is an urgent need to continue the follow-up of these women and their children to detect the appearance of sequelae of the disease or peristent COVID 19

This study compares the effects of lecture-based instruction and process-oriented guided inquiry learning (POGIL)-based instruction on the self-efficacy performance of Grade 12 students. A quasi-experimental, pretest-posttest design was adopted to investigate and assess the impact of POGIL-based instruction versus lecture-based instruction on students’ performance as measured by three types of cognitive outcomes; Knowing, Applying and Reasoning (KAR). Two government high schools in Alain were selected as research sites, one for the boys and one for the girls. The total number of participants was approximately 110 students (N=110); 54 were assigned to treatment groups (25 girls and 29 boys), and 56 were assigned to control groups (27 girls and 29 boys). The treatment group was taught a circular motion unit in physics using POGIL-based instruction, while the control group was taught the unit using lecture-based instruction. The study's findings showed statistically significant differences between students of the control group and the treatment group in favour of the latter regarding their science performance, self-efficacy and science-related attitudes. Moreover, positive correlations were found between participants’ performance at the KAR test, self-efficacy and scientific attitudes towards scientific inquiry after the intervention. In conclusion, it is recommended to shift teaching towards POGIL-based instruction due to its positive impact on students’ performance and self-efficacy. It is also suggested to replicate the study to include government and private schools, elementary and high schools, teachers and advisors.

Type 1 diabetes (T1D) has shown an increase in the incidence rate of about 3% per year over the last two decades. Continuous Insulin Subcutaneous Therapy (CSII) is widely used in the paediatric population with diabetes; however, it requires more preparation by the treating team and careful selection of potential users. Prescriptive provisions vary from Region to Region and the perspective of health workers still remains an unexplored area. The aim of the research project is to explore the representations of a group of diabetologists and psychologists working in pediatric diabetology on the national territory, regarding roles, functions and activities as part of a multidisciplinary team; their views on the potential benefits of CSII and the types of individuals applying for the use of technology. A socio-anagraphic data sheet was administered and two homogeneous focus groups were conducted by profession; they were audio recorded. The transcripts produced were analysed using the Emotional Text Mining (ETM) methodology. Each of the two corpus generated three clusters and two factors: for diabetologists, a focus on the patient in different levels of care emerged, collaborating both with other health professionals and with the territory, through the proposal of an intervention where the medical aspect is often represented by technology; also for psychologists there was a representation of interdisciplinary networking, with a greater focus on the processes inherent the management of pathology, from acceptance to the elaboration and integration of diabetes in the family narrative. The understanding of the representations of health professionals working in pediatric diabetes about new technologies can contribute to the consolidation of a network of professionals through a targeted work on possible critical issues emerged.

Abstract The severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) was first identified in people in the city of Wuhan at the end of December 2019, and it has since spread to all continents. Global interest has been focused on discovering a treatment and developing a successful coronavirus vaccine as a result of the emergence of this new coronavirus. In this research, we sequenced the whole genome of the SARS-COV-2 virus that were isolated from 40 patients in Duhok, Iraq. 95 different mutations were identified in our isolation when such the whole genome sequence of the SARS-COV-2 isolated from the city of Wuhan, China (Accession number: NC 045512.2) was matched to the virus's sequence using Sequencing technology (Illumina , USA ) and Assembly method (iVar 1.3.1). Sequence analysis revealed that 38 mutations were found at spike glycoprotein (S), 30 of which were found in the ORF1b , 11 mutations were found in ORF1b ,7,3,2,1 mutations were found in ( N,M,ORF6 ,ORF9 /E ) genes which had been linked to structural changes at various places. The conclusion that the cases in Iraq were of different origins of infections and had a close relationship with the isolates from different country and state were further confirmed by phylogenetic analysis and transmission. The whole genome sequence of the SARS-CoV-2 , which were identified from the Iraqi Kurdistan region, and reported as a first study in Kurdistan region.

Smartphone-based point-of-care testing (POCT) is rapidly emerging as an alternative to traditional screening and laboratory testing, particularly in resource-limited settings. In this proof-of-concept study, we present a smartphone- and cloud-based artificial intelligence quantitative analysis system (SCAISY) for relative quantification of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2)-specific IgG antibody lateral flow assays that enables rapid and accurate evaluation of test strips. By capturing an image with a smartphone camera, SCAISY quantitatively analyzes antibody levels and provides results to the user. We analyzed changes in antibody levels over time in over 248 individuals, including vaccine type, number of doses, and infection status, with a standard deviation of less than 10%. We also tracked antibody levels in six participants before and after SARS-CoV-2 infection. Finally, we examined the effects of lighting conditions, camera angle, and smartphone type to ensure consistency and reproducibility. This study suggests that SCAISY is a simple and powerful tool for real-time public health surveillance, enabling the acceleration of quantifying SARS-CoV-2-specific antibodies generated by either vaccination or infection and tracking of personal immunity levels.

According to the eminent scholar, philosopher, and physician Avicenna, "the doctor has three tools: the word, the plant, the knife." The plant kingdom is recognized as humanity's earliest and most ancient healing source, employed for the management and prevention of illnesses. Tracing back through history, the most ancient documented proof of plants' utilization in medicine dates back to a Sumerian clay slab discovered in Nagpur roughly 5000 years ago. This artifact included a compilation of twelve medicinal recipes that involved over 250 diverse plant species. Sumerian healers extracted powders and infusions from plant roots and stems, while also crediting healing properties to pears and figs. Additionally, they utilized dried and ground young shoots of willow and plum trees, pine and fir needles as a component in compresses and poultices. Often, powders from animal and mineral sources were blended with those extracted from dried and crushed plants. Notably, in addition to water, wine and beer served as solvents. Thus, at least 80 centuries ago, people utilized the most uncomplicated medicinal plant-based preparations for treatment [1]. The "Pen T'Sao," an ancient Chinese text on roots and herbs, authored by Emperor Shen Nung approximately 2500 BC, contains descriptions of 900 medicaments (comprising dried components of medicinal plants). Several of these substances are still in use today, including Rhei rhisoma, camphor, Theae folium, Podophyllum, great yellow gentian, ginseng, datura, cinnamon bark, and ephedra [2]. Regarding Kazakh folk medicine, an area that has yet to be fully explicated and substantiated, it can be stated that the traditional medicinal knowledge of the Kazakh people transcends the mere treatment of ailments and rests on robust theoretical underpinnings. Oteiboydak Tleukabyluly (1388-1478), an astute healer and prominent figure in Kazakh folk medicine during the 15th century, comprehensively explicated the secrets of the healing art in his medical and ethnographic work "Medical Narrative," which he composed between 1466 and 1473 at the behest of az-Zhanibek Khan, who held him in high esteem as a great healer. This medical encyclopedia delineates the functions of various organs of the human body and provides a catalogue of the primary diseases associated with them. Furthermore, it includes a meticulous description of the methods used in traditional medicine at present, such as setting bones, listening to the pulse, and incantations. Through practical experimentation and experimentation conducted in the steppe laboratory, the healer formulated a total of 1,108 different medicinal compounds, of which 858 were derived from medicinal plants, 318 were extracted from animal organs, and roughly 60 were sourced from metals. The moniker "Teacher without a teacher" was bestowed on Oteiboydak Tleukabylov, who discovered methods for treating 1,050 different diseases [3]. At present, the employment of phytotherapy has gained widespread acceptance on a global scale. According to the World Health Organization's (WHO) global review of national policies concerning traditional, complementary, and alternative medicine, as well as the regulation of herbal medicines, there is an evident growth in the European and Asian market for herbal medicines [4]. Kazakhstan boasts a natural flora of over 6,000 plant species [5]. The exact number of medicinal plant species present in Kazakhstan remains uncertain, as the list continues to expand annually. More than 150 plant species have been employed in both official and folk medicine for various ailments. This review focuses on a selection of medicinal plants growing within the territory of the Republic of Kazakhstan that have traditionally been used to alleviate skin diseases. In conducting this study (2010-2023), emphasis was placed on the plants' phytochemical composition, with a particular focus on the principal components responsible for their therapeutic effects against inflammatory skin conditions such as dermatitis, atopic dermatitis, and eczema.

Mobile robots can perform tasks on the move, including exploring terrain, discovering landmark features or moving a load from one place to another. This group of robots is characterized by a certain level of intelligence allowing making decisions and responding to stimuli received from the environment. As part of Industry 5.0, such mobile robots and humans are expected to co-exist and work together in a shared environment to make human work less tiring, quicker, and safer. This can only be realized when clean, dense, and economical energy sources are available. The aim of the study is to analyze the state of the art and to identify the most important directions for future developments in robotic power systems based mainly on batteries. The efficiency and performance of the battery depends on the design using different materials. Work environments and performance requirements are considered in this systematic review to classify solutions that help developers choose the best suited power system for specific application. Indirectly, the aim of the work is to generate discussion within the scientific and engineering community. A narrative review of publications from six major bibliographic databases according to preset inclusion criteria was combined with a critical analysis of current and future technologies. The main findings of the review allow answering question what is the role of modern power source technologies, artificial intelligence and ground-breaking research work in global policies related to energy saving, green policies, and sustainable development. The main opportunities and threats are discussed, and a brief feasibility analysis is carried out. Novelty of the article relates not only to the analysis of technologies, but also to approaches and their use under conditions of limited resource availability, when resource usage must be minimized. The article provides an overview of batteries, their specifications, classifications, and their advantages and disadvantages. In addition, we propose: (1) an algorithm for selecting main energy source for robot application, and (2) an algorithm for selecting electrical system power supply. Current mobile robot batteries are, in most cases, their biggest limitation. Progress in batteries development is too slow to catch up with the demand for robot autonomy and range requirements, limiting the development of mobile robots. Further intensive research and implementation work is needed to avoid years of delay in this area.

(1) Background: The issue of human adaptation to the Arctic environmental factors is relevant. The adaptation can be assessed through dynamic monitoring of the functional state of a person during his/her stay there. The vitamin D level in blood is one of the markers of the functional reserves of the human body and can contribute to more successful adaptation in the Arctic. (2) Methods: The study involved 38 participants in the scientific and educational expeditionary project "Arctic Floating University-2021". Blood collection for determination of vitamin D content was carried out at the beginning of the expedition. A dynamic study was carried out for 20 days in the morning and in the evening during a marine scientific expedition to the Arctic. The main parameters of the functional state of the participants were assessed using instrumental psychophysiological, projective and questionnaire methods. Statistical methods: Mann-Whitney U-test, correlation analysis using the Spearman coefficient. (3) Results: It was found that at the beginning of the expedition, the functional state of participants with severe vitamin D deficiency is characterized by a shorter average duration of RR intervals and reduced SDNN values, which may indicate a higher level of regulatory mechanisms tension. The pronounced differences in the nature of the dynamic series of objective and projective working capacity parameters were manifested most clearly. According to the subjective questionnaire characteristics of well-being, activity and mood, no significant features of the participants with vitamin D deficiency were revealed. (4) Conclusion: The participants with vitamin D deficiency in blood are characterized by a reduced adaptive capacity during the expedition to the Arctic.

Variable-DOF (or kinematotropic) mechanisms are a class of reconfigurable mechanisms. The number of variable-DOF multi-loop planar mechanisms proposed so far is very limited. This paper proposes a novel 8-link variable-DOF planar mechanism with five motion modes. Firstly, a description of the 8-link variable-DOF planar mechanism is presented. Reconfiguration analysis of the 8-link mechanism is then carried out using an elimination and algebraic geometry hybrid approach. The analysis shows that the 8-link mechanism has one 2-DOF motion mode and four 1-DOF motion modes and can switch among three motion modes at four transition configurations and between two motion modes at the remaining four transition configurations. Geometric characteristics of the mechanism in different motion modes are also revealed. Unlike the variable-DOF planar mechanisms found in literature, the proposed 8-link mechanism has two inactive joints in one of its 1-DOF motion modes, and both 4R kinematic sub-chains of the mechanism must appear as parallelograms in a pair or anti-parallelograms in a pair in the same motion mode. As a by-product, a method for factoring trigonometric functions in two angles is proposed.

Rational demonstration in favor of God`s existence was a fundamental theme in Indian theism — īçvara-vāda (teaching about Īçvara), original theistic metaphysics in classical Indian Philosophy. Traditionally, Nyāya together with Vaiċeşika and Yoga are regarded as the most theistic Indian systems that assert Īçvara — personal Divine Absolute with such attributes as perfect and supreme consciousness, compassion, etc. Udayana (X-XI cc.), an eminent Indian philosopher of the Nyāya school, performed a highly-sophisticated and elaborated defense of God`s existence, especially in his brilliant opus called “Nyāya-kusumāņjali” (NK), where he presented his famous eight proofs in the severe polemics with opponents (nirīçvara-vādins). By the end of XX century, translators and interpreters of NK started the process of actualization of Udayana`s argumentation in detail. Cosmological proofs in NK present Īçvara as Supreme Cause of the universe, its numerical structure and initial impulse. Udayana`s theism resembles metaphysical principles of ancient, medieval philosophy and contemporary Thomism. Besides comparative analysis, this article undertakes the questions of God`s transcendence and immanence, co-relation between reason and belief in Udayana`s works. Lately, scholars have stressed that Udayana has been deprived of sufficient attention though his heritage and original rational arguments for God`s existence can enrich world theism and theology.

: Polymer single screw extrusion is a major industrial processing technique used to obtain plastics products. To assure high outputs, tight dimensional tolerances, and excellent product performance, extruder screws may show different design characteristics. Barrier screws, which contain a second flight in the compression zone, have become quite popular as they promote and stabilize polymer melting. Therefore, it is important to design efficiently extruder screws and decide whether a conventional screw will do the job efficiently, or a barrier-screw should be considered instead. This work uses multi-objective evolutionary algorithms to design conventional and barrier screws (Maillefer screws will be studied) with optimized geometry. Processing of two polymers, Low Density Polyethylene and Polypropylene, is analyzed. A methodology based on the use of Artificial Intelligence (AI) techniques, namely data mining, decision making and evolutionary algorithms, is presented and utilized to obtain results with practical significance, based on relevant performance measures (objectives) used in the optimization. For the various case studies selected, Maillefer screws were generally advantageous for processing LDPE, while for PP the use of both types of screws would be feasible.

Background Community health workers (CHWs) drawn from the general population are an important human resource in health care systems, preventing non-communicable diseases (NCDs) and contributing to an increase in healthy life expectancy in Japan. Thus, we have developed the COmmunity health workers perceptual and behavioral Competency Scale for preventing Non-communicable diseases (COCS-N) to measure CHWs’ competence in preventing NCDs. The purpose of this study is to examine individual and community factors affecting CHWs’ COCS-N scores. Methods Municipal public health nurses and other public health professionals are responsible for training and supporting CHWs in Japan. Therefore, the existence of CHWs and their willingness to participate in the study were confirmed with the municipalities, who were asked to distribute the self-administered questionnaire to CHWs where consent was obtained (N = 6,480). Variables used included demographic characteristics, COCS-N scores, and individual- and community-related factors. Logistic regression analysis was used to assess associations between variables. Results A total of 3,120 people completed the questionnaire, a valid response rate of 48.1%. The respondents’ mean age was 67.0 years (standard deviation = 9.0), and 88.0% were female. Comparison of the high- and low- competence groups in terms of NCD prevention based on COCS-N scores identified 13 factors associated with significant differences, including years spent working as a CHW (p < 0.001), subjective sense of health (p = 0.005), European Health Literacy Survey Questionnaire (HLS-EU-Q47) scores (p < 0.001), and community commitment scale (CCS) scores (p < 0.001). Logistic regression analysis revealed that HLS-EU-Q47 scores (odds ratio [OR]: 1.02, 95% confidence interval [CI]: 1.02–1.03) were a significant individual factor, while CCS scores (OR: 1.14, 95% CI: 1.11–1.16) were a significant community factor. Conclusions We found that the COCS-N score was associated with the individual factors overall health literacy (HL), perceptions of HL, and subjective sense of health, and with the community factor CCS scores. These results suggest that strengthening individual factors such as HL and subjective sense of health, and community factors such as sense of community is an effective strategy for increasing CHWs’ competence in preventing NCDs.

This paper shows that by applying the Nyquist-Shannon sampling theorem, the spatial and temporal resolution of a simulation can be no more than half the resolution of the simulating reality. This has significant implications for not only the values of the observables in the simulation but also its physical laws. This progressive halving of nested simulations coupled with the minimum resolution compatible with the production of a simulation also sets a limit to the nestedness of a lineage of simulations (it is by no means infinite). The limit of nestedness is then used to calculate the probability that we are living in a simulation assuming a single base reality. This will be shown to be significantly lower than popular expectation. A Kardashev-like scale, with three variants, is also developed to gauge the technological advancement of a civilization in relation to the extent to which it can extract information from space and time.

The factors that determine the relative rates of amino acid substitution during protein evolution are complex and they are known to vary among taxa. We estimated relative exchangeabilities for pairs of amino acids from clades spread across the tree of life and assessed the historical signal in the distances among these clade-specific models. We trained these models separately on collections of arbitrarily selected protein alignments and on ribosomal protein alignments. In both cases we found a clear separation between the models trained using multiple sequence alignments from bacterial clades and the models trained on archaeal and eukaryotic data. We assessed the predictive power of our novel clade-specific models of sequence evolution by asking whether fit to the models could be used to identify the source of multiple sequence alignments. Model fit was generally able to classify protein alignments correctly at the level of domain (bacterial versus archaeal), but the accuracy of classification at finer scales was much lower. The only exceptions to this were the relatively high classification accuracy for two archaeal lineages: Halobacteriaceae and Thermoprotei. Genomic GC content had a modest impact on relative exchangeabilities despite having a large impact on amino acid frequencies. Relative exchangeabilities involving aromatic residues exhibited the largest differences among models. There were a small number of exchangeabilities that exhibited large differences in comparisons among major clades and between generalized models and ribosomal protein models. Taken as a whole, these results reveal that a small number of relative exchangeabilities are responsible for much of the structure of the “model space” for protein sequence evolution. If we look beyond the information that these clade-specific models reveal about protein evolution the models themselves are likely to be useful tools for phylogenomic inference across the tree of life.

The calculation of the exact value of the square root of 2 is requested. In order to obtain its infinite value, A new concept is proposed where the accumulations of the infinitely many of finity is indicated by the change in direction which means that there is a jump from finity to infinity .The meaningless for an infinite number with a decimal point is indicated by this jump because any decimal number only have meanings within a finite range values and there is only an infinite integer quantity that can not be operated by algorithms like operations of multiplication，division,addition, and subtraction . The final result of the change in direction is two quantity where the second quantity and the first quantity extend in parallel line and never intersect and the second quantity represent the size of the first quantity. The first quantity is the infinitely great that can't be talked about anything outside of it and can compress any quantities outside of it to nothing and it is the exact value of the square root of 2 .

The practice of nurse health coaching (NHC) draws from the art and science of nursing, behavioral sciences, and evidence-based health coaching methods. This secondary analysis of the audio-recorded natural language of participants during NHC sessions of our recent 8-week RCT evaluates improvement over time in cognitive-behavioral outcomes: Change Talk, Resiliency, Self-Efficacy/Independent Agency, Insight & Pattern Recognition, and Building Towards Sustainability. We developed a measurement tool for coding, Indicators of Health Behavior Change (IHBC), that was designed to allow trained health coach experts to assess the presence and frequency of the indicators in the natural language content of participants. We used a two-step method for randomly selecting the 20-minute audio-recorded session that was analyzed at each time point. Fifty-six participants had high-quality audio recordings of the NHC sessions. Twelve participants were placed in the social determinants of health (SDH) group based on the following: low income (<$20,000/year), early-onset hypertension, and social disadvantages. Our analyses significantly improved Change Talk and the other four factors over time. Our factor analyses indicated two distinct factors at each measurement point of the study, demonstrating the stability of the outcome measures over time. Our newly developed measurement tool, IHBC, proved stable in structure over time and sensitive to change. This NHC program shows promise in improving cognitive-behavioral indicators associated with health behavior change in both non-SDH and SDH individuals.

Based on the example of wintering waterbirds in the Baltic Sea, we show a method that is useful in setting priorities for species management. The Value Factor (VF) shows which species in the region are the most valuable and on which ones conservation measures need to focus. Every year 4,400,000 waterbirds winter in the Baltic. Among which the highest priority species are velvet scoter Melanitta fusca (VS, VF=153) and long-tailed duck Clangula hyemalis (LTD, VF=204): 74% and 40%, respectively, of the world populations and over 90% of the EU populations of both species spend the winter there. Management plans (MP) regulating the protection of marine Natura 2000 sites (MPA) and dedicated to the protection of VS and LTD have been implemented in 65% and 51%, respectively, of MPAs in the Baltic. Poland, a key country for the survival of these species, has not implemented a single MP despite the existence of documentation confirming their crucial importance for seaducks, and on the pressures occurring there. We suggest using the VF concept to define priority species. On this basis, it will be possible to identify gaps in the protection of the most seriously threatened species and implement conservation measures in the most appropriate sites

In order to reduce the large damage caused by train derailment, protective facilities of various shapes and conditions can be installed on railroad tracks. These protective facilities are referred to as derailment containment provisions (DCPs) and three different types are used worldwide. However, there are no clear standards for DCPs design such as installation location, size, and design load, and performance verification of DCPs installed in the actual railway field is not sufficiently performed. In this paper, the functionality of DCPs is analyzed through the full-scale derailment test. In order to propose a method for estimating the collision load acting on the DCP type I after derailment, the experimental results and simulation results are compared. The function of DCP type I according to the change of the vehicle's center of gravity is identified through comparative analysis of the post derailment behavior.

Taking care of stroke survivors can be taxing, however, it was understudied in Malaysia. This study aims to describe the burden of informal stroke caregivers within three months after hospital discharge. A longitudinal study design was conducted. Acute stroke survivors and their informal caregivers were recruited prior to hospital discharge, and the caregivers were interviewed by phone. Self-reported caregiver burdens were measured with Zarit Caregiver Burden Interview – Malay version (MZBI) and Caregiver Assessment of Function and Upset – Malay version (Malay-CAFU). The MZBI and Malay-CAFU scores were collected four times within three months. A total of 85 stroke survivors and 155 informal caregivers were recruited, with 58.1% of the caregivers were female. The stroke survivors had two caregivers on average. The mean (SD) scores for the three scales show a reduction, from 27.42 (12.73) in the first week to 17.77 (11.20) in the third month for MZBI, from 1.14 (0.94) to 0.62 (0.64) for instrumental activities of daily livings (IADL) of Malay-CAFU upset scale and 1.36 (1.00) to 0.78 (0.65) for activities of daily living (ADL) of Malay-CAFU upset scale in the same period. Stroke survivors may have several caregivers, usually their spouses or children. Within a short period, the caregiver’s burden was reduced. Early psychosocial support to alleviate the caregiver burden may be necessary.

Background: Cyber Security is to protect online data and software from cyber threats. These cyberattacks are typically intended to gain access to, change, or delete sensitive information; extort money from users; or disrupt regular corporate activities. It is difficult to keep up a regular follow up with new technologies so it is necessary to keep the important data safe from cyber threats. There are many types of cyber threats; malware, ransom-ware, social engineering, phishing etc. To prevent cyber-attacks one can use password manager tools like LastPass and others. People also use two factor authentication for double security on their accounts. Methods: Boards such as the National Institute of Standards and Technology (NIST) are developing frameworks to assist firms in understanding their security risks, improving cybersecurity procedures, and preventing cyber assaults. The fight against cybercrimes and attack, rganisations needed a strong base there are 5 types of cyber securities; Critical Infrastructure Security, application security, network security, cloud security and (IoT) Security. In the modern time US is highly based on computers and on different software so it is really important for US to be more conscious about the security as they get many threats almost everyday for hacking their data and accounts.Results and Conclusion: Nowadays, even small businesses rarely recover their loss from the cyber-attacks and many back-off from continuing their businesses after being target of hackers. The first cybercrime attack was recorded on 1988 by a graduate student. Now that large companies and even small businesses are aware of cyber-attacks so they try their best to take every precaution to prevent the hacking with double security and password manager tools.

We assessed true bugs among above-groundand and soil inhabitants of four different biocoenosis of pine forests representing the intra-zone areas of flora and fauna of the Kazakh upland. 15 species of three families were listed for the Central Kazakhstan region for the first time. Species Eremocoris podagricus was not registered for the territory of Kazakhstan earlier. Fifteen species (50 %) were true above-ground inhabitants or ones living on grasses, whereas other species use soil surface and ground litter as temporary habitats. Drymus brunneus and Eremocoris fenestratus play a key role in the structure and function of the true bugs assemblages in the in biotopes studied. The ecological success of typically forest and boreal inhabitants in biotopes of arid region is explained by relict nature of forests and ancient connections with the taiga zone of Western Siberia and mountain forests of the Urals and Altai. The results of a comparative analysis of the similarities and differences of the dominant and ecological structures of Heteroptera complexes of aboriginal studied forests and derived type of forest are presented.

For solving the fractional differential equations in computational fluid dynamics (CFD), it’s complicated and difficult by the Laplace and Fourier transforms. Based on the Caputo fractional derivative, the analytical solutions for unsteady unidirectional flows of a generalized Oldroyd-B fluid are deduced by the separation of variables method. Results show that the analytical solutions are given easily, and have good university. For some specific parameter values, the well-known analytical solutions for the generalized second grade fluid, the generalized Upper-Convected Maxwell (UCM) fluid as well as the ordinary Oldroyd-B fluid can be obtained.

The fear of missing out (FoMO) is characterized in the literature as a fear that others are having rewarding experiences while one is missing out, and a constant need to keep connected with one’s social network. Driven by Social Determination Theory (SDT) FoMO has been linked with Problematic Social Networking Sites use (PSNSU), negative affectivity (NA), self-esteem (SE) and sleep disturbances. The present study reports findings from 512 individuals (79.1% women, mean age 30.5 years, SD= 8.61). Structural equation modelling (SEM) suggests that the duration of SNSs use and the numbers of SNSs platforms actively used partially mediated the relationship between FoMO and PSNSU. In turns, PSNSU partially mediated the relationship between FoMO and NA. Furthermore, the present study has extended the literature by incorporating the Vulnerability Model in the FoMO concept, identifying that SE partially mediated the relationship between FoMO and NA, while NA fully mediated the relationship between FoMO and sleeping disturbances. Accordingly, the present has extended previous research findings in showing exercise as a potential protective factor to prevent against FoMO. Practical and theoretical implications are discussed.

Chinese Taihe Black-bone silky fowl (TBsf) is the homology of medicine and food and has high nutritional and medical value all over the world. However, the nutritional compositions and specific metabolite advantages of Taihe silky fowl muscle are still poorly understood. In this study, we investigated the differences of nutritional components between TBsf and another similar breed (Black Feathered chicken and laid green-shelled eggs, BF-gsc). Meanwhile, we also explored the divergences in muscle characteristics of Taihe silky fowl fed with two different diets, that is normal chicken feed (TBsf-ncf) and Broussonetia papyrifera-fermented feed (TBsf-bpf). Firstly, the growth performance and biochemical index of Taihe silky fowl was significantly different compared with black-feathered chicken. Secondly, we identified the metabolic alterations in Taihe silky fowl by performing an un-targeted UHPLC-Q-TOF-MS/MS analysis. Our results suggested that the whole metabonomic characteristics had obvious separation between TBsf-ncf, TBsf-bpf and BF-gsc groups both in the positive and negative ion mode by PCA analysis. Next, OPLS-DA multivariate analysis revealed that 57 metabolites (in positive mode) and 49 metabolites (in negative mode) were identified as differential metabolites between TBsf-ncf and BF-gsc group. These differential metabolites were mainly enriched to ABC transporters, biosynthesis of amino acids and aminoacyl-tRNA biosynthesis. Besides, there were 47 metabolites (in positive) and 13 metabolites (in negative) were differentially regulated between TBsf-ncf and TBsf-bpf group, which were majorly involved in histidine metabolism and linoleic metabolism. Furthermore, the integrated network analysis suggested that DL-arginine, DL-isoleucine, linoleoylcarnitine, stearoylcarnitine (positive) and ricionleic acid, D-proline, uric acid (negative) were the significantly metabolic biomarkers in Taihe silky fowl. Moreover, the metabolites of primaquine, ticlpoidine, riboflavin, acetylcarnitine (positive) and salicylic acid, acetaminophen sulfate, glutamic acid (negative) were markedly changed in the Taihe silky fowl fed with BP-fermented feed. In summary, a global survey of the nutritional components and metabolite differences were performed in muscle tissues of Taihe silky fowl between various breeds and feeds. The comprehensive expression profiles of the metabolites in Taihe silky fowl affected by genetic and environmental factors were acquired. This study provided valuable evidence fo breed and feed-induced putative biomarkers as well as improved the economic value of Taihe silky fowl through targeted metabolite regulation.

This venture targets giving a correspondence framework that can improve the legal framework execution and cooperation and furthermore make it simple to lead execution audits. This examination depicts restricted admittance to the right legitimate data just as admittance to courts and court administrations as the essential factors that limit admittance to equity. The basic target fundamental for accomplishing the point incorporates planning an online easy to understand data framework that would improve correspondence and association between legal professionals like legal advisors and disputants. The undertaking uses a subjective methodology that zeroed in on the substance investigation of essential information. Key members were court laborers like attorneys and agents, just as court clients like disputants. Pre-plan discoveries uncovered that current legitimate data frameworks – basically court sites – neglect to recognize their crowd by treating all court clients similarly comparative with the correspondence of lawful data. Likewise, the issue of admittance to equity includes the significant expense of equity also, restricted legal data that elevates admittance to equity. Post-plan discoveries from the online overview directed after the turn of events and execution of the IT curio uncovered a powerful and productive legitimate data framework. Exploration discoveries supported the advancement of an IT antiquity that records for huge shortcomings in current legal data frameworks, for example, their failure to pass on fitting legitimate data intelligently and productively. In outline, the investigation prescribes the reception of saw control to work fair and square of certainty of court clients and the differentiation between court clients to convey the right data to the right crowd.

Nowadays, energy saving is considered a key issue worldwide, as it brings a variety of benefits: reducing greenhouse gas emissions, reducing demand for energy imports, and lowering costs on a household and economy-wide level. Researchers and building designers are looking to optimize building efficiency by means of new energy technologies. Changes in existing buildings can also be made to reduce energy consumption and costs. These may include the usage of new heat transfer fluids based on nanofluids. In this work, an extended experimental campaign (from February 2020 to March 2021) has been carried out on an educational building in the Campus of University of Salento, Lecce – Italy, in order to evaluate the increase in performance of the HVAC system, due to the usage of a nanofluid. The results show that, under optimal operating conditions, plant performance improves more than 10%, with average daily peaks of about 15%.

The coronavirus disease of 2019, COVID-19, is caused by an infection with severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). It was recognized in late 2019 and has since spread worldwide leading to a pandemic with unprecedented health and financial consequences. There remains an enormous demand for new diagnostic methods that can deliver fast, low-cost, and easy-to-use confirmation of a SARS-CoV-2 infection. We have developed an affordable electrochemical biosensor for the rapid detection of serological immunoglobulin (Ig) G antibody in sera against the Spike protein. Materials and Methods: A previously identified linear B-cell epitope (EP) specific to SARS-CoV-2 spike glycoprotein and recognized by IgG in patient sera was selected for the target molecule. After synthesis, the EP was immobilized onto the surface of the working electrode of a commercially available screen-printed electrode (SPE). The capture of SARS-CoV-2 specific IgGs allowed the formation of an immunocomples that was measured by square wave voltammetry from its generation of hydroquinone (HQ). Results: An evaluation of the performance of the EP-based biosensor presented a selectivity and specificity for COVID-19 of 93% and 100%, respectively. No cross-reaction was observed to antibodies against other diseases that included Chagas disease, Chikungunya, Leishmaniosis, and Dengue. Differentiation of infected and non-infected individuals was possible even at high dilution factor that decreased the required sample volumes to a few microliters. Conclusion: The final device proved suitable for diagnosing COVID-19 assaying actual serum samples and the results displayed good agreement with the molecular biology diagnoses. The flexibility to conjugate other EPs to SPEs suggests that this technology could be rapidly adapted to diagnose new variants of SARS-CoV-2 or other pathogens.

Since 1974, when Heinz von Foerster made the distinction between “the cybernetics of observed systems” as first-order cybernetics (1oC) and “the cybernetics of observing systems” as second-order cybernetics (2oC), cybernetics has been dominated by this observer-centric paradigm that he claimed cannot be extended meaningfully to a third-order. Rather than attempting to extend his paradigm, we derive an alternative, model-centric paradigm from first principles of regulation that naturally extends to three orders, where the third order is ethical regulation. We thus consider a type of regulator that requires a third model and a third observer: If the third model is a model of acceptable (ethical) situations, then a third observer is a necessary element of the system’s “conscience” that prevents or detects any violations of the model of ethical situations. In this paradigm, the cybernetics of systems that are designed to exhibit ethical behaviour can be characterized as third-order cybernetics (3oC). By being able to extend the paradigm to include ethical systems, the model-centric paradigm brings clarity and utility that is not possible using the philosopher-friendly observer-centric paradigm and its under-specified (abstract) observers. Finally new definitions for cybernetics are proposed that clearly differentiate between the science and the philosophy, of cybernetics.

Low-cost particle sensors are now used worldwide to monitor outdoor air quality. However, they have only been in wide use for a few years. Are they reliable? Does their performance deteriorate over time? Are the algorithms for calculating PM2.5 provided by the Plantower company for PurpleAir monitors accurate? We investigate these questions using continuous measurements of four monitors (8 sensors) under normal conditions inside and outside a home for 1.5-3 years. A recently-developed algorithm (called ALT-CF3) is compared to the two existing Plantower algorithms. The Plantower CF1 algorithm was shown to lose 25-50% of all indoor data due to the questionable practice of assigning zero to all concentrations below a threshold. None of these data were lost using the ALT-CF3 algorithm. About 92% of all data showed precision better than 20% using the ALT-CF3 algorithm, but only about 45-75% of data achieved that level using the Plantower CF1 algorithm. The limits of detection (LODs) using the ALT-CF3 algorithm were mostly under 1 ug/m3, compared to about 3-10 ug/m3 using the Plantower CF1 algorithm. The percent of observations exceeding the LOD was 53-92% for the ALT-CF3 algorithm, but only 16-44% for the Plantower CF1 algorithm. For indoor air in homes, the Plantower algorithms are inappropriate.

Internet of Things (IoT) technologies can greatly benefit from machine learning techniques and Artificial Neural Networks for data mining and vice versa. In the agricultural field, this convergence could result in the development of smart farming systems suitable for use as decision support systems by peasant farmers. This work presents the design of a smart farming system for crop production, which is based on low-cost IoT sensors and popular data storage services and data analytics services on the Cloud. Moreover, a new data mining method exploiting climate data along with crop production data is proposed for the prediction of production volume from heterogeneous data sources. This method was initially validated using traditional machine learning techniques and open historical data of the northeast region of the state of Puebla, Mexico, which were collected from data sources from the National Water Commission and the Agri-food Information Service of the Mexican Government.

We construct a novel family of summation-integral type hybrid operators in terms of shape parameter $\alpha\in \lbrack 0,1]$ in this paper. Basic estimates, rate of convergence, and order of approximation are also studied using the Korovkin theorem and the modulus of smoothness. We investigate the local approximation findings for these sequences of positive linear operators utilising Peetre's K-functional, Lipschitz class, and second-order modulus of smoothness.

Abstract Successful treatment against infectious agents depends on rapid and accurate detection of the causative organisms. Misdiagnosis can hamper such success while leading to improper advising of antibiotics. In Bangladesh, the majority of the diagnostic centers detect and identify pathogens through culture and biochemical test-based methods and suggest antibiotics based solely on the results of disk-diffusion methods. This pilot study tried to validate the identity of the isolates characterized by diagnostic facilities near Dhaka. One hundred and twenty pre-characterized clinical isolates were analyzed biochemically and genotypically. Random Amplification of Polymorphic DNA-PCR, rcsA, and phoA genes-based PCR, and Loop-Mediated Isothermal Amplification (LAMP)-based identification of Klebsiella pneumoniae and Escherichia coli, respectively, followed by 16S rRNA sequencing confirmed misidentification of some clinical pathogens of other genera as Klebsiella spp. and E. coli. According to the antibiotic susceptibility testing guidelines, antibiotic choice, sensitivity pattern, and breakpoint measurement are different for each group of organisms. The lack of adherence to proper standards results in misdiagnosis and may facilitate the development of antibiotic resistance. The pilot study observers misidentification of clinical pathogens identified by the diagnostic centers. Well-characterized rapid molecular techniques like LAMP are suggested in clinical diagnosis to avoid misdiagnosis and subsequently circumvent antibiotic resistance development.