Beginning with the discovery of the BRCA ovarian cancer susceptibility genes and subsequent detailed examination of risk reduction salpingo-oophorectomy (RRSO) specimens, a new paradigm of ovarian carcinogenesis has unfolded with attention to the distal fallopian tube. The primary focus has been an early cancer in the fallopian tube which is seen in virtually all incidentally discovered high-grade serous cancers in asymptomatic women. This high-frequency of tubal involvement in early serous cancer - serous tubal intraepithelial carcinoma or STIC - has galvanized attention to this organ as a primary source of this disease. However, an enduring mystery has been the relatively low frequency of STIC in fallopian tubes of women with advanced malignancy. This paradox, a high-frequency of tubal involvement early and a low-frequency late in the disease process has spurred interest in other potential sources, such as the ovarian surface or secondary Mullerian system. However, because essentially all high-grade serous carcinomas are linked by TP53 mutations, and because fallopian tubes frequently contain early serous proliferations (ESPs) with these mutations, attention has turned to the possibility that nonmalignant but TP53 mutated tubal epithelium could be responsible for an eventual malignancy. Recent data have shown evidence of lineage continuity between ESPs and concurrent serous carcinomas prompting the concept of "precursor escape". This creates a 2nd component of the paradigm by which cells from early lesions can escape the fallopian tube and undergo future malignant transformation later, emerging suddenly as widespread malignancy. This dualistic model thus explains the paradox and opens new questions pertaining to the challenge of both early detection and prevention of this lethal malignancy.

Evaluation of the effects of a high-frequency acceleration (HFA) device on patient pain response to orthodontic forces. A multi-centered trial investigating pain sensitivity to orthodontic forces on 75 subjects at 4 study centers. Subjects underwent clear aligner treatment, with or without adjunctive HFA and documented their pain intensity using the validated NRS10 numeric rating scale. In-Office and At-Home ratings were measured separately for each subject for immediate and extended effect evaluations. Use of HFA devices in conjunction with clear aligner orthodontic treatment demonstrated significant reduction in subjects’ recorded pain ratings vs controls within 5 minutes of aligner exchange, (p = 0.006) and significant reduction in recorded pain ratings vs controls over a 7-day period following aligner exchange (p = 0.018). A 99.6% daily compliance rate with at home use of the HFA device was recorded for all subjects in the study. HFA significantly reduces pain attributed to orthodontic force. HFA delivers clinically significant immediate pain relief, and clinically significant extended pain relief over the 7 days following adjustment.

The photoreduction of CO2 is an intriguing process, which allows the synthesis of fuels and chemicals. One of the limitations for CO2 photoreduction in the liquid phase is its low solubility in water. This point has been here addressed by designing a fully innovative concept of pressurized photoreactor, allowing operation up to 20 bar and applied to improve the productivity of this very challenging process. The photoreduction of CO2 in the liquid phase was performed using commercial TiO2 (Evonink P25), TiO2 obtained by flame spray pyrolysis (FSP) and gold doped P25 (0.2 wt% Au-P25) in the presence of Na2SO3 as hole scavenger (HS). The different reaction parameters (catalyst concentration, pH and amount of HS) have been addressed. The products in liquid phase were formic acid and formaldehyde. Moreover, for longer reaction time and with total consumption of HS, gas phase products formed (H2 and CO) after accumulation of significant amount of organic compounds in the liquid phase, due to their consecutive photoreforming. Enhanced CO2 solubility in water was achieved by adding a base (pH= 12-14). In basic environment, CO2 formed carbonates which further reduced to formaldehyde and formic acid and consequently formed CO/CO2+H2 in the gas phase through photoreforming. The deposition of small Au nanoparticles (3-5 nm) (NPs) onto TiO2 was found to quantitatively influence the products distribution and increase the selectivity towards gas phase products.

We conducted an in-situ crystal structure analysis of ferroselite at non-ambient conditions. The aim is to provide a solid ground to further the understanding of the properties of this material in a broad range of conditions. Ferroselite, marcasite-type FeSe2, was studied under high pressures up to 46 GPa and low temperatures, down to 50 K using single-crystal microdiffraction techniques. High pressure and low temperatures were generated using a diamond anvil cell and a cryostat. We found no evidences of structural instability in the explored P-T space. The deformation of the orthorhombic lattice is slightly anisotropic. As expected, the compressibility of the Se-Se dumbbell, the longer bond in the structure, is larger than that of the Fe-Se bonds. Less obvious is the behavior of the octahedral bonds, the shorter bond is the most compressible determining a small increase in the octahedron distortion with pressure. We also achieved a robust structural analysis of ferroselite at low temperature in the diamond anvil cell. Structural changes upon temperature decrease are small but qualitatively similar to those produced by pressure.

Moisture and thermal are the key factors for influencing methane desorption during CBM exploitation. Using high pressure water injection technology into coalbed, new fractures and pathways are formed to methane transport. It is existed a phenomenon of water inhibiting gas flow. This study is focused on various water pressures impacted on gas adsorbed coal samples, then the desorption capacity could be revealed under different conditions. And the results are shown that methane desorption capacity was decreased with water pressure increased at room temperature and the downtrend would be steady until water pressure was large enough. Heating could promote gas desorption capacity effectively, with the increasing of water injection pressures, the promotion of thermal on desorption became more obvious. These results are expected to provide a clearer understanding of theoretical efficiency of heat water or steam injection into coalbed, they can provide some theoretical and experimental guidance on CBM production and methane control.

This research focuses on developing a Student Performance Evaluation System to enhance effectiveness and oversight in higher education. The system aims to address challenges faced by instructors in evaluating student performance using a distributed system approach. Agile methodology is employed in development, and database replication techniques are applied for data synchronization. System features include registration, assessment form creation, assessment submission, statistical visualization, and access to assessment history. The system is designed to improve efficiency and transparency in the assessment process. Key features of the system include registration process, assessment form creation, assessment submission, statistical visualization, and access to assessment history. Its goal is to enhance efficiency and transparency throughout the assessment process. The article details the system workflow and the roles played by Admins, Instructors, and students in system usage. Additionally, it discusses the back-end development model and pathways, as well as the performance testing results. Performance testing indicates that the system achieves high throughput of up to 21.55 requests per second, with an average response time of only 34 milliseconds and an error rate of zero percent. These results affirm that the system efficiently handles user loads and nearly instantaneously responds to requests, providing an optimal user experience in the context of student performance evaluation in higher education.

This research focuses on developing a Student Performance Evaluation System to enhance effectiveness and oversight in higher education. The system aims to address challenges faced by instructors in evaluating student performance using a distributed system approach. Agile methodology is employed in development, and database replication techniques are applied for data synchronization. System features include registration, assessment form creation, assessment submission, statistical visualization, and access to assessment history. The system is designed to improve efficiency and transparency in the assessment process. Key features of the system include registration process, assessment form creation, assessment submission, statistical visualization, and access to assessment history. Its goal is to enhance efficiency and transparency throughout the assessment process. The article details the system workflow and the roles played by Admins, Instructors, and students in system usage. Additionally, it discusses the back-end development model and pathways, as well as the performance testing results. Performance testing indicates that the system achieves high throughput of up to 21.55 requests per second, with an average response time of only 34 milliseconds and an error rate of zero percent. These results affirm that the system efficiently handles user loads and nearly instantaneously responds to requests, providing an optimal user experience in the context of student performance evaluation in higher education.

Traditional high pressure mechanical compressors account for over half of the car station’s cost, have insufficient reliability and are not feasible for a large-scale fuel cell market. An alternative technology, employing a two-stage, hybrid system based on electrochemical and metal hydride compression technologies, represents an excellent alternative to conventional compressors. The high-pressure stage, operating at 100-875 bar, is based on a metal hydride thermal system. A techno-economic analysis of the metal hydride system is presented and discussed. A model of the metal hydride system was developed, integrating a lumped parameter mass and energy balance model with an economic model. A novel metal hydride heat exchanger configuration is also presented, based on mini-channel heat transfer systems, allowing for effective high-pressure compression. Several metal hydrides were analyzed and screened, demonstrating that one selected material, namely (Ti_0.97Zr_0.03)_1.1Cr_1.6Mn_0.4, is likely the best candidate material to be employed for high-pressure compressors under the specific conditions. System efficiency and costs were assessed based on the properties of currently available materials at industrial levels. Results show that the system can reach pressures on the order of 875 bar with thermal power provided at approximately 150 °C. The system cost is comparable with the current mechanical compressors and can be reduced in several ways as discussed in the paper.

In this study, broilers were selected as the research object to investigate the effects and mechanism action of dietary gallic acid (GA) supplementation on growth performance, meat quality, antioxidant capacity, and muscle fiber-related gene expression. A total of 750 one-day-old healthy 817 male crossbred broiler chickens were divided into five treatment groups, with six replicates per group: control group (CON), basal diet, basal diet with lipopolysaccharide challenge (LPS), basal diet with 150, 300, 450 mg/kg GA supplementation and LPS challenge (GA150, GA300, GA450). On days 14, 17, and 20, chickens in the LPS, GA150, GA300, and GA450 groups received intramuscular injections of LPS, while chickens in the CON group received saline. Compared with the LPS group, adding GA (GA150 and GA300) significantly increased the average daily gain (ADG) of broiler chickens from 1 to 50 days old (p < 0.05), and had the tendency to increase average daily feed intake (ADFI) (p = 0.078). Dietary addition of 450 mg/kg GA significantly reduced the pH value of breast muscle at 45min after slaughter (p < 0.05), and as the level of GA addition increased, the pH value first decreased and then increased. Compared with the LPS group, adding 450mg/kg GA significantly increased the brightness of breast muscles at 45min and 24h after slaughter (p < 0.001). Dietary supplementation of 450 mg/kg GA significantly decreased the total volatile basic nitrogen (TVB-N) content of post-mortem breast muscle (p < 0.05). Adding 450 mg/kg GA could significantly increase C22:6n-3 concentration in breast muscle (p < 0.05). Different GA levels had no significant effect on the intramuscular fat (IMF) content of broiler breast muscle (p > 0.05). Adding GA (GA150 and GA300) significantly increased (p < 0.05) the total superoxide dismutase (T-SOD) activity in the breast muscle after LPS stimulation, significantly increased (p < 0.05) the catalase (CAT) activity, and significantly reduced (p < 0.05) malonic dialdehyde (MDA) production, and had the tendency to increase glutathione peroxidase (GSH-Px) activity (p = 0.066). In addition, dietary supplementation of GA significantly increased the expression levels of myosin heavy chain (MyHC) I and MyHC IIa in breast muscles (p < 0.05), and significantly decreased the expression level of MyHC IIx (p < 0.05). In summary, dietary addition of GA can alleviate the stress response on the growth performance of broiler chickens and improve antioxidant capacity and meat quality. The appropriate amount of dietary GA at each stage was 300 mg/kg.

The dietary proteins are one of the most important factors determining health conditions in human. The sufficient digestion and absorption of dietary proteins in the digestive tract have positive effects on performance and recovery in sportspeople or athletes. Improving of protein digestibility is a strategy for maintaining health status and optimal performance in sport or exercise activities. The hypothesis of the present study is that Weizmannia coagulans BC 99 (BC99) can increase muscle mass and strength. This randomized double-blind, controlled trial assigned 72 male college students to receive probiotics (n = 36, 20.25±1.03 years; 1.79±5.94 cm; 73.55±8.73 kg, protein powder with BC99) or placebo (n = 36, 20.19±0.79 years; 179.25±5.16 cm; 73.61±8.24 kg, protein powder) for 12-week. At the baseline and final stages of the study, strength tests and body composition assessment were performed; Blood and stool samples were taken at the end of the 12-week intervention, digestive enzymatic activity of stool samples, biochemical parameters, amino acids and hormone level of plasma were analyzed. BC99 administration significantly improved strength performance, skeletal muscle mass, activity of pepsin and trypsin, the concentrations of branched chain amino acids and essential amino acids, reduced activities of creatine kinase and lactic dehydrogenase and urea nitrogen (BUN) level, and increased testosterone and glucagon-like peptide-1 level in male college students. Therefore, BC99 supplementation can be an important nutritional strategy to improve strength performance, body composition, protein digestion and body metabolism in various groups of individuals.

The rapid advancement of 5G networks, coupled with the increasing complexity of resource management, traffic handling, and dynamic service demands, has underscored the need for more intelligent network optimization techniques. This paper comprehensively reviews AI-driven methods applied to 5G network optimization, focusing on resource allocation, traffic management, and network slicing. Traditional models face limitations in adapting to the dynamic nature of modern telecommunications, and AI techniques-especially machine learning (ML) and deep reinforcement learning (DRL)-offer scalable, adaptive solutions. These approaches enable real-time optimization by learning from network conditions, predicting traffic patterns, and intelligently managing resources across virtual network slices. AI's integration into 5G networks enhances performance, reduces latency, and ensures efficient bandwidth utilization. It is indispensable for handling the demands of emerging applications such as IoT, autonomous systems, and augmented reality. This paper highlights key AI techniques, their application to 5G challenges, and their potential to drive future innovations in network management, laying the groundwork for autonomous network operations in 6G and beyond.

The numerical algorithm used for the original multi-dimensional non-linear optimization analysis of the marine fixed pitch (screw) propulsion presented herewith, after its invention and publication has been widely used for the analysis and best fit (most probable / less uncertain) solution of over-determined non-linear mathematical problems, where the points of observations (measured data) are more than the unknown parameters in the mathematical formulation expressing the significant aspects of the observed phenomena. Any “local” attainable solution of this formidable and ingenious algorithm, may rely to the set of initial values of the unknown parameters, while not all possible solutions are expected to be physically significant for a specific problem, whereas judgment, bounds and testing are to be practiced for making sure that the attained solution is the best fit (most probable / less uncertain) one, and not necessarily the “global minimum” one. In the present paper the above algorithm is applied for the original analysis of standard ships propulsion, and particularly for the original combined application of thermo-fluid and frictional models of main engines, as well as of fixed pitch propulsion hydrodynamic models, necessary for resolving in an integrated manner the combined marine propulsion problem for standard ships under seagoing conditions.

In the current digital era, Enterprise Data Management (EDM) plays a pivotal role in enhancing business performance by ensuring efficient handling of diverse data sources and enabling real-time applications. However, the complexity of managing vast data streams and integrating various systems presents significant challenges for enterprises. These challenges can be mitigated by incorporating APIs and Middleware, APIs help integrate diverse systems, while middleware solutions facilitate communication between different software environments, Cloud-Based Data Platforms such as AWS, Azure, and Google Cloud to offer scalable data storage and processing capabilities, allowing businesses to expand without compromising on performance. This study proposes a systematic review of business performance improvements driven by various types, sources, and real-time applications, highlighting cost efficiency, reliability, and increase in revenue using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) framework, the inclusion criteria is bounded by (1) publication date between 2014 to 2024, (2) written in English, (3) research focusing on EDM with an emphasis on types, data sources, and real-time applications, and (4) research work that provides a clear framework for the analysis of EDM’s impact on enhancing business performance. Following this process, 136 eligible research studies were included. The cost of implementation can vary significantly based on the size and complexity of the system. Operational and maintenance costs can vary widely depending on the infrastructure, data storage requirements, and the level of real-time application integrations. As EDM systems scale to accommodate more diverse data sources and real-time analytics capabilities, the associated costs increase accordingly.

As the carbon storage capacity of timber is recognized, there is growing interest in timber and wooden structures as a solution to various environmental problems. The use of Korean timber with substantial carbon storage capacity is required to reduce Korean carbon emissions and circulate timber resources. In this study, fire tests were conducted to investigate the charring properties of glued laminated timber columns made of Korean larch. The fire tests were conducted under both load-bearing and non-load-bearing conditions. The fire test results showed that the charring depth was affected by the corners of the section, and that the load ratio had an insignificant influence on the charring depth when the load ratio was 0.9 or less. This study provides data that can be used to compare the charring properties of laminated wood produced using South Korean larch with the charring properties of foreign standards. This provides reference data for developing fire-resistant design standards for timber structures made from South Korean timber.

Self-esteem and student engagement play critical roles in shaping academic performance, particularly in the context of distance education, where direct classroom interaction is limited. This preliminary study examines the relationships between self-esteem, student engagement, and academic performance among 1,479 students at an Indonesia's open university, Universitas Terbuka. Using a cross-sectional survey design, the study employed multiple validated scales, including the Rosenberg Self-Esteem Scale, Student Engagement Scale, and self-reported academic performance measures, to explore how these variables interact. The results show that self-esteem alone does not significantly predict academic performance (F = 2.31, p = 0.071), but student engagement plays a moderating role, significantly enhancing the effect of self-esteem on academic outcomes (interaction term: B = 0.25, p = 0.010). Additionally, students from matrilineal family systems reported significantly higher self-esteem (M = 3.92, SD = 0.569, p = 0.014) and academic engagement (M = 3.93, SD = 0.870, p < 0.001) compared to their patrilineal counterparts. These preliminary findings highlight psychological and cultural factors in online education, with ongoing qualitative analyses in a broader mixed-method study set to deepen insights into technology challenges and further contribute to distance learning research.

Empirical findings support the important role played by prosocial behavior and scholastic per-formance in significantly affecting adolescents’ long term psychosocial adjustment. Furthermore, several studies showed the positive impact of academic self-efficacy in affecting adolescents’ social and academic functioning; however, no studies have investigated the effect of other important personality structures, such as students’ feedback sensitivity. The present study aims at investi-gating the effects of adolescents’ feedback sensitivity (reward sensitivity/punishment sensitivity) on their prosocial behavior and scholastic performance also examining the potential indirect effect of academic self-efficacy on the association between reward/punishment sensitivity and prosocial behavior/scholastic performance. Participants were 132 adolescents (53.1% males; Mage = 16.42, SD) from Rome (Italy). Students’ reward/punishment sensitivity, academic self-efficacy, prosocial behavior and scholastic performance were self-reported. A path analyses model showed a positive and significant effect of academic self-efficacy on scholastic performance, a positive significant ef-fect of punishment sensitivity on prosocial behavior, a positive significant effect of reward sensi-tivity on academic self-efficacy and a significant indirect effect of academic self-efficacy on the association between reward sensitivity and scholastic performance. Results of this study are useful in term of practical implications to promote students’ adjustment.

This study presents the development and evaluation of a Multi-Task Long Short-Term Memory (LSTM) model with an Attention Mechanism designed to predict students' academic performance. The model concurrently addresses two tasks: predicting overall performance (total score) as a regression task and categorizing performance levels (remarks) as a classification task. By processing both tasks simultaneously, the model optimizes computational efficiency and resource use. The dataset includes detailed student performance records across various metrics such as Continuous Assessment, Practical Skills, Demeanor, Presentation Quality, Attendance, and Participation. The model's performance was evaluated using comprehensive metrics. For the regression task, it achieved a Mean Absolute Error (MAE) of 0.0249, Mean Squared Error (MSE) of 0.0012, and Root Mean Squared Error (RMSE) of 0.0346. For the classification task, it attained perfect scores with an accuracy, precision, recall, and F1 score of 1.0. These results highlight the model's high accuracy and robustness in predicting both continuous and categorical outcomes. The Attention Mechanism enhances the model's capabilities by identifying and focusing on the most relevant features. This study demonstrates the effectiveness of the Multi-Task LSTM with Attention Mechanism in educational data analysis, offering a reliable tool for predicting student performance and potential broader applications in similar multi-task learning contexts. Future work will explore further enhancements and wider applications to improve predictive accuracy and efficiency.

Circadian rhythm (CR) influences various physiological functions, including physical and cognitive performance, which fluctuate throughout the day. The present study aimed to investigate the combined and separate effects of CR and physical fatigue on cognitive and physical performance. A sample of 18 amateur athletes was subjected to a series of tests at three different times of the day: morning, afternoon, and evening. Fatigue was induced following isokinetic concentric exercise combined with a 20-minute treadmill run, followed by assessments of selected physical and cognitive tasks. Repeated measures ANOVA did not reveal an interaction between CR and fatigue in cognitive performance (p &gt; 0.05). However, a significant main effect of fatigue was observed in visual reaction time (VisRT) across all three time points. Moreover, peak torque (PT) and peak torque fatigue index (PTFI) showed significant differences between the three times of the day, peaking in the evening. Although we found no interaction between CR and physical fatigue state on selected cognitive parameters at the three times of day, a separate effect of fatigue on cognitive performance was identified. Additionally, physical parameters exhibited peak values occurring in the evening hours. Future research should further explore underlying mechanisms that potentially influence cognitive performance at different times of the day.

Many amateur and professional players start racing at an early age. The aim is to explore the characteristics of heart rate and speed patterns recorded during competition. We investigated the body composition and cardiorespiratory characteristics of three elite adolescent athletes, their heart rate, and speed patterns in the laboratory and competition. There is no difference between the three riders' anthropometric and body composition values, except for training age (TA), where rider (b) started riding three years ago. The intra-race heart rate patterns of the three riders showed similarities in several places and differences in several places. This was also true for the speed patterns. The differences between races were more pronounced in the heart rate pattern.

The current economic and political crisis has brought about a change in the environment in which Non-Governmental Development Organizations (NGDOs) have traditionally operated. This change can be summed up as a reduction in the funds they receive and an increase in the population they must serve. The need then arises to have mechanisms that allow an analysis of the good work performed by the NGDOs. Knowing the efficiency of the NGDOs in the management of their previous projects can contribute towards improving their future achievements. The aim of this research is to establish some objective indicators that allow an evaluation of the efficiency of these organizations. Firstly, a detailed analysis of the regulation of the three Agencies is conducted (Spanish-AECID, European- EuropeAid and American -USAID). This allows us to synthesize the indicators of good performance of the NGDO based on the study of the eligibility criteria of public donors. The research concludes with the study of the efficiency following the Promethee Approach. Our results reveals that 44.6% of the NGDOs (33 out of the 74 studied) operate inefficiently, compared to 29.7% which are efficient.

In the foodservice industry, clients judge not only the product standard but also the service quality they receive during their restaurant experience. Therefore, when the importance of the dining experience is strongly regarded by consumers in terms of intellectual and motivational attributes, they are happier to suggest the establishment to others. The main objective of this research is to study the influence of different service quality factors in restaurants and their impact on customer satisfaction. This research is also undertaken to evaluate the identification of important factors for the restaurant industry and the levels of service quality among customers satisfaction with the services offered by restaurants in India. As factor analysis, correlation, and regression research, this study was conducted using a modified IBM SPSS Statistics 24 and AMOS instrument among the 630 randomly selected customers. A weighted mean was used to describe the levels of service quality and customer satisfaction. Multiple regressions were used to determine the predictors of customer satisfaction. The results reveal the main 12 service quality factors, which are: 1. Process-related factors: system for take-away orders, order tracking system, and time for food preparation 2. People-related factors: focus on customers' special requests, peer group influence, and making you feel special. 3. Physical Environment: Walking Space, Architecture of the Restaurant, and Signals for Direction 4. Performance-related factors: food served at an appropriate temperature; food presentation; portion size of food in the restaurant. The researchers have developed one model on service quality factors that is described in the research paper.

This study investigates cloud cavitation suppression around a model scale NACA66 hydrofoil using active water injection and explores the effect of multiple injection parameters. Numerical simulations and a mixed-level orthogonal test method are employed to systematically analyze the impact of jet angle αjet, jet location Ljet, and jet velocity Ujet on cavitation suppression efficiency and hydrofoil energy performance. The study reveals that jet location has the greatest influence on cavitation suppression, while jet angle has the greatest influence on hydrofoil energy performance. The optimal parameter combination (Ljet = 0.30C, αjet = +60 degrees, Ujet = 3.25 m/s) effectively balances energy performance and cavitation suppression, reducing cavitation volume by 49.34% and improving lift-drag ratio by 8.55%. The study found that the jet's introduction not only enhances vapor condensation and reduces the intensity of the vapor-liquid exchange process but also disrupts the internal structure of cavitation clouds and elevates pressure on the hydrofoil suction surface, thereby effectively suppressing cavitation. Further analysis shows that positive-going horizontal jet components enhance the lift-drag ratio, while negative-going components have a detrimental effect. Jet arrangements near the trailing edge negatively impact both cavitation suppression and energy performance. These findings provide valuable reference for selecting optimal injection parameters to achieve a balance between cavitation suppression and energy performance in hydrodynamic systems.

This study investigates the implementation and performance benefits of using a MongoDB replica set compared to a single node setup. The primary objective was to evaluate the efficiency and reliability improvements provided by replication in a NoSQL database cluster. The research involved configuring a single node and a three-node replica set, followed by conducting performance tests using CRUD operations on both setups. The results indicated that while the single node exhibited faster write operations, the replica set significantly improved read performance and provided high availability and fault tolerance. The findings highlight the advantages of using a replica set for applications requiring robust data access and consistent performance under varying workloads.

The giant octopus caught off the east coast of Korea is an important fishery resource with the largest haul and is mostly caught using net pots. While giant octopus pots have different shapes, drum, rectangular, and cylinder pots are mostly used. However, these pots have not been thoroughly evaluated. Here, we evaluated the fishing performance of three giant octopus pots, their fluid resistance, and underwater movement. Six sea trials were conducted near the Hupo region in Gyeongsangbuk-do. In total, 163 individuals (62,724 g), 190 individuals (49,913 g), and 154 individuals (52,364 g) were caught using drum, rectangular, and cylinder pots, respectively. Drum pots showed significant differences in the amount of catch by weight (ANOVA test, p&lt;0.05). Moreover, the percentage of minimum conservation size was the lowest in cylinder pots (6.5%). Drum pots showed the highest stability in the underwater stability test, while underwater fluid resistance at 2.5 kt fluid speed was in the following order: drum pots (7.66 kgf) &gt; rectangular pots (7.16 kgf) &gt; cylinder pots (7.04 kgf). Therefore, drum pots showed excellent fishing performance. This study provides foundational data for developing managing systems for giant octopus resources and establishing the extent of fishing gear usage.

Daylighting design is not only a stage of dimensioning glazed surfaces to provide sufficient natural light to an occupied space, but also a method of analysing how this matter can be achieved without unwanted effects, such as: gains and losses of heat, glare, and variations of the daylighting intensity, at various indoor distances and levels. According to the international regulations in force, glazed surfaces must be designed with a careful balance between the admission of natural light and thermal performance, such as heat loss in winter and heat gain in summer. In a novel project, it is essential to determine the optimal ratio of window-to-wall surface area. This necessity arises because the materials constituting the glazed surfaces of windows typically exhibit lower insulation properties compared to those of the building's walls. This methodology could be applied to building renovations when envelope modifications are possible and suitable. The case study presented in the paper highlights the energy consumed due to a group of windows with a large glazed area in an existing building, located in a temperate continental climate area. The energy consumption results from supplementary artificial lighting required to maintain adequate illumination for indoor activities and that to counterbalance heat loss during colder periods are evaluated. The analysis performed by modifying the glazed surface led to the identification of an optimum value of windows dimensions for an energy consumed minimum.

This study investigated the effect of replacing part of the dietary soybean meal with either polymer-coated urea or gelatinized starch urea on the performance, nutrient digestibility, blood biochemical indexes, ruminal fermentation and rumen microflora of Angus heifers. The urea release profiles of two kinds of slow-release urea were evaluated in vitro and indicated a superior nitrogen retention with the polymer-coated urea. 210 purebred Angus cattle (BW = 314.26 kg) were divided into three groups: no urea group (CON), polymer-coated urea group (PCU), gelatinized starch urea group (GSU), 20g/kg polymer-coated urea or 25g/kg gelatinized starch urea was used to replace part of soybean meal in the concentrate feed respectively according to the principle of iso-metabolic energy and iso-nitrogenous. During the whole experiment, the ADG of PCU group was higher than both the GSU group and the CON group. The feed-weight ratio of the PCU group was significantly lower than both the GSU group and the CON group during the 90-day feeding period. The ADF apparent digestibility in the PCU group was significantly higher than that of the CON group, and extremely significantly higher than that of the GSU group. On the 86th day, the ALB content in the PCU group was significantly higher than that in the CON group. The contents of acetic acid and butyric acid, total volatile fatty acid and propionic acid were significantly higher in the PCU group than in the CON group. Bacterial diversity analysis found that the abundance of Firmicutes was higher in the PCU group than that in the GSU group and the CON group at the phylum level, and inverse result was observed in Bacteroidetes. The abundance of Paraprevotella was higher in the PCU group, whereas higher abundance of Prevotella was found in the GSU group at the genus level. These results indicate that both polymer-coated urea and gelatinized starch urea can replace part of soybean meal in the diet, and the amount of substitution in this trial had no diverse effect on the performance of Angus heifers, and the effect and economic benefits brought by polymer-coated urea were better than gelatinized starch urea.

This paper explores the utilization of ensemble models and learning analytics techniques to predict student academic performance. With the advent of educational big data, institutions are increasingly leveraging advanced analytics to gain insights into student learning patterns and optimize educational outcomes. Ensemble models, which combine the predictive power of multiple algorithms, offer a robust approach to enhance prediction accuracy. The performance of the ensemble models was analyzed and compared using the Open University Learning Analytics Dataset, which consists of sources such as demographic information, historical performance data, and engagement metrics for 23,344 students. The evaluation of various ensemble models across different classification scenarios revealed that the proposed stacking model consistently emerges as the best-performing model, excelling in both multi-class and binary classification tasks.

Trust plays a pivotal role in supplier-buyer relationships, influencing decision-making, collaboration dynamics, and organizational performance. This qualitative study explores the multifaceted nature of trust in supplier-buyer relationships across diverse industries. Through in-depth interviews and thematic analysis, the study examines how trust develops, evolves, and impacts business interactions. Participants from various organizational settings provided insights into the cognitive, affective, and behavioral dimensions of trust, highlighting its role as a strategic asset in fostering resilience and competitive advantage. Findings underscored the importance of transparency, communication, and shared values in building trust, with emotional bonds and cultural compatibility enhancing partnership longevity and mutual commitment. Challenges such as asymmetrical power dynamics, economic uncertainties, and regulatory pressures were identified as barriers to trust, necessitating proactive strategies and ethical standards to mitigate risks. Practical implications include promoting open communication, aligning incentives, and cultivating a culture of trust within supply chains to enhance operational efficiencies and innovation. Future research could explore the impact of digitalization, technological advancements, and cross-cultural differences on trust dynamics, further enriching our understanding of effective relationship management in global markets. By addressing these complexities and leveraging trust as a foundational element, organizations can navigate uncertainties and capitalize on opportunities for sustainable growth and collaboration in dynamic business environments.

The financial performance of local governments is closely related to the economic growth of a region. Strong financial performance provides a solid foundation for sustainable economic development. This study analyses the relationship between local government financial performance, capital expenditure, and sustainable economic growth in Banten Province. A quantitative approach was employed, using secondary data from Regional Revenue and Expenditure Budgets and economic growth statistics. Purposive sampling was utilised, and data analysis was conducted using Path Analysis. The findings reveal that several financial ratio variables significantly impact economic growth directly and indirectly through capital expenditure as a mediating variable. Directly, the independence ratio, effectiveness ratio, efficiency ratio, fiscal decentralisation ratio, dependency ratio, and capital expenditure significantly influence economic growth. The independence and effectiveness ratios have a positive impact, indicating that improvements in these variables directly foster economic growth. However, the efficiency and fiscal decentralisation ratios have a negative impact, suggesting that increases in these variables may reduce economic growth. Indirectly, through capital expenditure, the independence, effectiveness, dependency, and compatibility ratios significantly affect economic growth, with the independence ratio being the most dominant. Conversely, the fiscal decentralisation and efficiency ratios do not show significant indirect effects, indicating that capital expenditure is not an effective mediator for these variables.

This study aims to evaluate the financial performance of SOEs in Indonesia and compare it with private companies using financial ratio analysis and efficiency analysis approaches. Four construction sector SOEs were evaluated, and five private companies were compared using financial data from 2015 to 2022. The financial ratio analysis used the Peterson (2013) approach, while the efficiency analysis employed the data envelopment analysis (DEA) approach and the paired t-test. The study results show that the financial ratio performance of state-owned companies is relatively poor, with low profitability, critical liquidity, and a high debt ratio. Debt, as a source of capital in financing construction projects, makes companies face a greater debt risk. This study validates that SOEs have lower efficiency compared to private companies.

The inclusion of exogenous phytase in broiler P and Ca deficient diets in response to heightened concerns over excessive P excretion into the environment over the years has remarkably been documented. However, responses among these studies have been inconsistent because of the several factors affecting P utilization. For this reason, a systematic review with meta-analysis of results from forty-one studies published from 2000 to February 2024 was evaluated to: 1) quantitatively summarize the size of phytase effect on growth performance, bone strength, and mineralization in broilers fed P and Ca deficient basal diets and 2) estimate and explore the heterogeneity of the effect sizes of outcomes using sub-group and meta-regression analyses. The quality of the included studies was assessed using the Cochrane Collaboration’s SYRCLE Risk of Bias checklists for animal studies. Additionally, applying the random-effects models, Hedges’ g effect size of supplementation with phytase was calculated using the R software to determine the standardized mean difference (SMD) at a 95% confidence interval. Sub-group analysis and meta-regression further explored heterogeneity (P_SMD ≤ 0.05, I² > 50%, n ≥ 10). The meta-analysis showed that supplemental phytase increases ADFI and BWG and reduces FCR at each time point of growth (< 0.0001). Additionally, phytase supplementation consistently increased tibia ash, P and Ca, and bone strength (< 0.0001) of broilers fed P and Ca deficient diets. Results of the subgroup and meta-regression analyses showed that age and strain of broiler, dietary P source, and duration of phytase exposure significantly influence the effect size of phytase on growth and bone parameters. In conclusion, phytase can attenuate the effect of reducing dietary available phosphorus and calcium and improve ADFI, BWG, and reduced FCR, especially when added to starter diets. It further enhances bone ash, bone mineralization, and bone-breaking strength of broilers, even though the effects of bone ash and strength can be maximized in the starter phase of growth. However, the effect sizes of phytase were related to the age and strain of the broiler, dietary P source, and duration of phytase exposure rather than the dosage.

This work simulates the performance of lithium batteries for electric vehicles under different charge and discharge rates. The simulation is based on similarity factors for power, voltage and current, reproducing the real operation conditions of an electric vehicle at the model scale. Most current driving modes have been analysed corresponding to discharge rates from 0.1C to 0.37C. The simulation has also been applied to determine charging time using charge power in real conditions, from 6.1 kW to 18.3 kW (0.1 C to 0.3C). Driving conditions are obtained using equations for vehicle motion including all forces. Tests have been run under two configurations, continuous and alternate current circuits, to reproduce the two types of engines that electric vehicles use. The simulation shows very good agreement in charge and discharge processes, average deviation of 3% related to real conditions, and 1.6% between them, which proves the validity of the simulation process.

In order to explore the effects of glutamate on the growth performance, antioxidant capacity and protein metabolism of juvenile Chinese mitten crab. 0%, 1% and 2% glutamate were supplemented to low protein (30%) and normal protein (35%) diets respectively. There were 5 parallel tanks in each treatment, and the feeding duration was 8 weeks. The results showed that dietary glutamate did not significantly affect the weight gain of Chinese mitten crab. Diets supplemented with 2% glutamate significantly decreased the crude protein of crabs. The T-AOC of crabs fed the 30% protein diets was significantly lower than crabs fed the 35% protein diets. At 30% protein level, the superoxide dismutase (SOD) activity significantly increased with the increase of glutamate content. Dietary glutamate significantly down-regulated the relative expressions of mTOR, PI3K, S6K1 and 4EBP at 35% protein level. In conclusion, dietary glutamate cannot significantly increase the growth of Chinese mitten crab, but it can improve the antioxidant capacity in Chinese mitten crab under low protein condition.

Real-time data processing and decision-making are increasingly crucial in various applications, driven by the continuous influx of data streams. Event-driven AI workflows within serverless computing environments offer a promising approach to handle these real-time demands efficiently. This paper presents a framework for simulating and analyzing the performance characteristics of such workflows. Our proposed approach utilizes simulated data with varying event rates and durations to investigate the impact on key performance metrics like latency, throughput, and resource utilization. This enables a comprehensive evaluation of the inherent trade-offs within event-driven AI systems. The key findings reveal a trade-off between latency and throughput. As the event rate increases, average processing latency generally increases while average throughput increases. Resource utilization remains relatively stable across different event rates in the simulated scenarios (e.g., 75.55\% at 2 events/second, 74.51\% at 10 events/second). This framework provides a valuable tool for understanding the performance characteristics of event-driven AI workflows and optimizing resource allocation strategies.

This study draws on both the theory of resource-based view and the theory of stakeholders to investigate the effects of Green Human Resource Management (Green HRM) practices on Sustainability and Employee Health Orientation (EHO) through the mediating effect of Environmental Performance (EP). Based on a cross-sectional survey questionnaire, the data were collected from 318 service and manufacturing firms across India. Partial least squares structural equation modeling (PLS-SEM) was applied to determine the link among constructs. The findings of the empirical evidence reveal that Green HRM practices have positive and significant effects on EP, Sustainability and EHO. Also, the findings demonstrate that EP partially mediates the link between Green HRM practices and Sustainability. Similarly, the findings establish that EP partially mediates the link between Green HRM practices and EHO. Finally, the potential implications of this research and future research for practitioners and scholars are addressed.

Dipole antennas, fundamental components in wireless communication systems, have garnered significant attention due to their versatility and efficiency across various applications. This literature review explores the performance analysis of dipole antennas, focusing on recent advancements and methodologies from 2019 to 2024. Employing a systematic approach, the review synthesizes findings from multiple databases, emphasizing peer-reviewed studies that delve into dipole antenna designs and applications. Through meticulous data extraction, key parameters influencing dipole antenna performance, such as material properties and operating frequency, are identified and analyzed. Results highlight the widespread utilization of dipole antennas in wireless communication systems, including indoor positioning, mobile communication, and antenna calibration, among others. Discussions underscore the evolution of dipole antennas in base station environments and their role in filtering applications. The review concludes by emphasizing the continued relevance and evolution of dipole antennas, showcasing their adaptability and potential across diverse wireless communication contexts.

The aim was to identify if surface electromyography (sEMG) parameters are indicative of post-activation potentiation (PAP)/post-activation performance enhancement (PAPE), in terms of twitch potentiation and voluntary performance. Three databases were used in March 2024, with the following inclusion criteria: (a) original research, assessed in healthy human adults, (b) sEMG parameters were measured. The exclusion criteria were: (a) studies with no PAP/PAPE-protocol, (b) non-randomized control trials. The following data were extracted: study characteristics/demographics, PAP/PAPE-protocols, sEMG parameters, twitch/performance outcomes, and study findings. A modified physiotherapy evidence database (PEDro) scale was used for quality assessment. Fifteen randomized controlled trials (RCTs), with a total of 199 subjects were included. The M-wave amplitude (combined with a twitch torque outcome) was shown to generally be indicative of PAP. The sEMG amplitude (in some muscles) were found to be indicative of PAPE during ballistic movements, while a small decrease in the MdF (in certain muscles) were shown to reflect PAPE. Changes in the Hmax/Mmax ratio were found to contribute (temporally) to PAP, while the H-reflex amplitude was shown to be neither indicative of PAP nor PAPE. This review provides preliminarily findings suggesting that certain sEMG parameters could be indicative of PAP/PAPE. However, future research is warranted.

Raw earth bricks made from the soil of the Chalky Champagne region (France) have been used for at least two millennia in construction, a promising heritage in the context of reducing the carbon emissions of buildings. The present experimental study aims at measuring the physical, mechanical, thermal, and hydric properties of adobes collected from a local village barn. Results show a high chalk content estimated at 71%, and a clay content, acting as binder, at 14%. Despite limited load-bearing capacity, these lightweight adobes are suitable for current single-story constructions, while their hydrothermal properties classify them as excellent moisture regulators for occupants. In association with other bio-sourced materials such as starch-beet pulp bricks, Chalky Champagne adobes yield promising insulating properties, and meet the criteria defined by current energy standards.

This study investigates the impact of rotor spacing on the aerodynamic performance of a coaxialcopter. It has been observed that a small distance between two rotors can result in significant interaction between the propellers, consequently affecting the rotor's aerodynamic efficiency. Exploiting this characteristic, the present research introduces a coaxialcopter with variable rotor spacing. Employing finite element numerical simulations, we assess the aerodynamic behavior of this novel configuration. Through comprehensive measurements and analysis of its aerodynamic performance across varying rotor spacings from 0.1R to 1R, we validate the effectiveness of a rotor spacing control strategy for enhancing takeoff maneuvers. Our numerical simulation results reveal that the performance characteristics of both upper and lower rotor converges toward that of a single rotor as pitch ratio increases, along with the reduce of their thrust fluctuations and aerodynamic performance periodicity. Considering stable power consumption patterns and endurance performance, we analysis the interrelations binding of pitch distance of the rotors, rotational speed, and pitch angle, vis-à-vis the thrust coefficient and power coefficient. Through parameter optimization method, we demonstrate that adjusting rotor spacing offers a practical means to enhance payload capacity without increasing power input, thereby improving the efficiency, which validates the practicality and efficacy of the parameter optimization approach. Furthermore, optimizing rotor spacing for specific operational scenarios enhances overall aerodynamic performance, suggesting a viable flight control strategy for takeoff and landing conditions.

The Australian Bureau of Meteorology offers a national operational 7-day ensemble streamflow forecast service covering regions of high environmental, economic and social significance. This semi-automated service generates streamflow forecasts every morning and is seamlessly integrated into the Bureau's Hydrologic Forecasting System (HyFS). Ensemble rainfall forecasts, European Centre for Medium-Range Weather Forecasts (ECMWF) and Poor Man's Ensemble (PME), available in the Numerical Weather Prediction (NWP) suite, are used to generate these streamflow forecasts. The NWP rainfall undergoes pre-processing using the Catchment Hydrologic Pre-Processer (CHyPP) before being fed into the GR4H rainfall-runoff model, which is embedded in the Short-term Water Information Forecasting Tools (SWIFT) hydrological modelling package. The simulated streamflow is then post-processed using the Error Representation and Reduction In Stages (ERRIS). We evaluated the performance of the operational rainfall and streamflow forecasts for 96 catchments using four years of operational data between January 2020 and December 2023. Performance evaluation metrics included CRPS, relative CRPS, CRPSS, and PIT-Alpha for ensemble forecasts and NSE, PCC, MAE, KGE, PBias and RMSE and three categorical metrics CSI, FAR and POD for deterministic forecasts. The skill scores CRPS, relative CRPS, CRPSS and PIT-Alpha, gradually decreased for both rainfall and streamflow as the forecast horizon increased from Day 1 to Day 7. A similar pattern emerged for NSE, KGE, PCC, MAE and RMSE as well as the categorical metrics. Forecast performance also progressively decreased with the higher streamflow regime. Most catchments showed positive performance skills, meaning the ensemble forecast outperformed climatology. Both streamflow and rainfall forecast skills varied spatially across the country – and were generally better in the high runoff generating catchments, and poorer in the drier catchments situated in the western part of the Great Dividing Range, South Australia and mid-west of Western Australia. We did not find any association between model forecast skill and the catchment area. Our findings demonstrate that the 7-day ensemble streamflow forecasting service is robust and draws great confidence from agencies that use these forecasts to support decisions around water resources management.

This article examines the evolution of the most extensively researched subjects in E-mobility during the previous two decades. The objective of this analysis is to identify the lessons that the State of Kuwait, which is falling behind other nations in E-mobility, can absorb in its efforts to embrace adoptions of electric vehicles (EVs). To strengthen the body of knowledge and deter-mine the most effective and efficient route to an "EV-ready" nation, the authors compiled data on the latest developments in the EV industry. A bibliometric analysis was performed on 3,962 articles utilizing the VOSviewer software, which identified six noteworthy clusters that warranted further attention. Additionally, we examine the sequential progression of these clusters as follows: 1. The environmental ramifications of electric mobility; 2. Advancements in electric vehicle technology, including range extension and soundless engines; and capital (CAPEX) and operational (OPEX) expenditures of purchasing and operating EVs. 3. Concerns regarding effectiveness and durability of EV batteries, 4. Availability of EV charging stations and grid integration, 5. Charging time, and finally 6. Origin and source of the energy utilized in the development of e-mobility. We are of the opinion that by delineating the critical aspects of e-mobility development, policymakers and decision-makers in Kuwait will be better equipped to formulate timely and economical choices pertaining to sustainable transportation.

With the application of high-precision, enormous rotating equipment and the addition of harsh working conditions, the advantages of dry gas sealing technology are increasingly obvious. Herein, research on the dynamic stability of dry gas seals is reviewed based on their operating mechanism. The influence of the dry gas seal structure, vibration response, and dynamic followability on the reliability of the shaft end sealing system of rotating machinery is the focus of current dry gas sealing technology. This work reviews the research history; analyzes the key coefficient of instability of the sealing system under external disturbances and the existing research on stability models; discusses the influence of starting and stopping characteristics, working conditions, and groove parameters on the stability of dry gas seals; and points out the shortcomings in the existing research. In addition, potential developments in dynamic stability are proposed, including improving model accuracy, improving experimental techniques, or applying intelligent control and optimization methods to enhance the dynamic stability of the sealing system. Finally, the development prospects for dry gas sealing technology in intelligent monitoring and wide temperature range adaptations are discussed, and theoretical guidance for improving the dry gas seal system is provided.

This research delved into exploring the impact of ladder training on improving the athletic performance of adolescent students, particularly focusing on boosting explosive power and speed. The study involved thirty boys aged 15-17, selected randomly from an Indian school in Doha, Qatar. The variables measured were Explosive Power (EP) and speed (S). EP was assessed using the Standing Broad Jump (SBJ), while Speed (S) was gauged through the 50-yard dash. Divided into two groups - the Experimental Group (EG) and the Control Group (CG), each consisting of fifteen students - the EG underwent dedicated ladder training for 12 weeks while the CG continued their routine. Analysis of pre-test and post-test results indicated significant enhancements in EP and speed within the EG, with notable shifts from 2.15±.27 to 2.40±.24and 7.52±.54to 6.97±.66, respectively, exhibiting significant 't' values (EP: -2.39; speed: 2.23) at P˂.05. Conversely, the CG showed minimal changes in EP (pre: 2.22±.22; post: 2.2±.21) and speed (pre: 7.51±.43; post: 7.58±.72), with 't' values of 0.295 and 0.842, respectively, failing to reach significance at P˂.05. These outcomes highlight the efficacy of ladder training in improving explosive power and speed among adolescent students, suggesting its potential as a safe and advantageous component in athletic training programs.

Software-defined networking (SDN) divides a traditional network into a programmable data plane and a centralized control plane. This technology is expected to transform traditional network companies that provide flexible and intelligent network operations. The core component utilized to oversee every data plane action is the controller in the control plane. In order to achieve optimal performances, the controller’s performance and capabilities are therefore crucial. There are lots of controller research available in existing literature. Nevertheless, no qualitative comparison study of OpenFlow-enabled distributed but logically centralized controllers exists for them. This article also includes a quantitative investigation of the performance of several distributed but logically centralized SDN controllers in custom network scenarios using Mininet, as well as a thorough qualitative comparison of them. More precisely, we give a qualitative evaluation of their attributes and classify and categorize 13 distributed but logically centralized SDN controllers according to their capabilities. Additionally, we offer a comprehensive SDN emulation tool called Mininet-based SDN controller performance assessment in this study. Using six performance metrics—bandwidth, round- trip time, delay, jitter, packet loss, and throughput—this work also assesses five distributed but logically centralized controllers against two custom network scenarios (uniform and non-uniform host distribution). Our investigation shows that the OpenDayLight controller performs the best across all performance criteria, with the exception of delay, packet loss and round trip time, where the Ryu controller excels. In the entire experiment, the HyperFlow and ONOS controller performs the worst in terms of all performance metrics. Finally, we discuss detailed research findings on the performance. These experimental results provide a decision-making guideline when selecting a controller.

1) Background: Patients with neurological disorders are particularly at risk of falling and requiret functional rehabilitation. HUBER® is a motorised rotating platform that allows simultaneous work on balance, stability and strength with continuous adaptation and immediate feedback. This study aimed to measure the impact of rehabilitation with the HUBER® on the physical performance and quality of life of patients with neurological diseases requiring functional rehabilitation. 2) Methods: 32 subjects were enrolled in CHU Liège CNRF and randomly divided into 2 groups. The first group received classical rehabilitation combined with two training sessions per week on the HUBER® for 8 weeks. The second group received their usual treatment. This randomized control trial has been registered on clinicaltrials.gov under the number NCT04687293. Physical performance and quality of life were evaluated at different time. 3) Results: There was no significant difference between the 2 groups after enrolment. In terms of physical performance, an improvement in SPPB chair stand test (p=0.021) and total SPPB (p=0.003) was observed in the HUBER® group. In terms of quality of life, a higher improvement was observed overall in the HUBER® group (p&lt;0.05 between groups). 4) Conclusion: The HUBER® showed promising results in functional rehabilitation of patients with neurological pathologies, as a complement to classical rehabilitation management by physiotherapy.

This study investigates the effect of dividend policy on firm performance and value in the Korean market, taking into account the unique context of Chaebol ownership structures. Analyzing 5,478 observations from the Korean Composite Stock Price Index, the research employs multiple regression models to explore the effects of various dividend policy measures under alignment and entrenchment theories. The key findings reveal significant impacts of cash dividend payment on firm value, while dividend yield and dividend policy exhibit varying associations. In the Chaebol and non-Chaebol context, mixed results suggest complex interactions between dividend policy and business outcomes. Policy recommendations emphasize transparent communication about dividend policy to mitigate information asymmetry and enhance corporate governance in the Korean market.

In this work the seismic resilience of the Emergency Department of a real Hospital complex, located in Tuscany (Italy), has been quantified, with special reference to its nonstructural components and organizational features. Special attention has been paid to the ceilings, whose importance stood out in past earthquakes. A comprehensive meta-model has been set, able to relate all the considered parameters to the assumed response quantity, i.e. the waiting time of the red-code patients arriving to the Emergency Department in the hours immediately after the seismic event. The seismic resilience of the Emergency Department has been measured with reference to earthquakes compatible to the seismic hazard of the area.

The main development direction of energy efficiency technologies in construction is the creation of various materials with a complex structure and unique strength, thermal and other properties. The aerogel is a material with high porosity and excellent thermal insulation properties. This paper provides the state-of-the-art of aerogel applications for the additive manufacturing of energy efficient buildings. This work provides the experimental and numerical assessment results of thermal conductivity of aerogel-enhanced blanket, the experimental assessment results of thermal performance of aerogel-enhanced building structure, the experimental assessment results of the aerogel application as mixture powder component of the concrete mixture to printing building and the experimental assessment results of the aerogel application as parget powder component. Experimental results show the effect of aerogel powder component application: thermal conductivity decreased by 25%.

Spatial regression models have garnered significant attention across several disciplines, including functional magnetic resonance imaging analysis, econometrics, home price analysis, and many other domains. The phenomenon of sparsity is often found in nature, when a limited number of factors contribute significantly to the overall variation. Spatial regression models frequently use sparsity to indicate less complex computational and more superficial covariance structures. The spatial error model is a significant spatial regression model that focuses on the geographical dependence present in the error terms rather than the response variable. This study proposes an effective approach for estimating the vector of regression coefficients in the spatial error model, taking into consideration of the prior knowledge that some coefficients are insignificant and there is multicollinearity among the regressors. It also introduces pretest and shrinkage ridge estimators for spatial error regression models, evaluating their performance compared to traditional maximum likelihood estimators. It also assesses their efficacy using real-world data and bootstrapping techniques for comparison purposes.

While considering the sensitivity over the parameter optimization, it is essential to determine which parameters have the most significant implications on model performance. This study focuses on the baseflow recession constant as one of the independent basin parameters to forecast low flows, perform hydrograph analysis, and calibrate rainfall-runoff models for significant improvement. Prior studies examined that the optimization of data adjustment parameters can improve the hydrological model performance and determine the minimum acceptable data length for data scarce regions using the Xinanjaing model. However, it is essential to pay special attention to the sensitivity of the recession constant, which can also impact the model performance during the data scarcity. Therefore, this study extends the research to comprehend the recession constant sensitivity over data adjustment parameters in the shorter datasets leading to more reliable parameter estimation. In terms of that, this study explores how recession constant affects hydrological parameter estimation on annual scale while keeping data adjustment parameters constant in continuous hydrological modeling, employing the Xinanjiang (XAJ) model as a case study. This study considered two approaches of recession constant (cg); (i) assessing the relationship between cg and the data adjustment parameter (Cep), for the 28-year datasets, (ii) investigating the significant impacts of the sensitivity of cg over Cep in shorter datasets which can affect the estimation of the acceptable minimum data length in the data scarce basins. The study underscores the importance of the recession constant sensitivity for reliable continuous hydrological model predictions, especially in data-scared areas. The study’s outcomes enhance the understanding of the importance of parameter sensitivity and its relationship in conceptual hydrological modeling during the data limitations.

Pt modified BaZr_0.76Y_0.2Ni_0.04O₃ (BZYN) is fabricated and characterized as a stable electrolyte for proton-conducting solid oxide fuel cell (H-SOFC). The utilization of X-ray diffraction method (XRD) and transmission electron microscopy (TEM) enables the identification of the presence of platinum (Pt) in both the crystal lattice sites and the grain interface. This occurrence contributes to a reduction in grain boundary resistance. Consequently, this phenomenon improves the conductivity of the electrolyte. The electrochemical performance of the single cell with Pt modified BZY electrolyte is improved by the reduction of ohmic resistance and enhancement of ion migration. This signifies a noteworthy advancement in the creation of more efficient and durable proton-conducting SOFCs.

In the wake of the rapid deployment of Small Modular Reactors (SMRs), this study aims to enhance the efficiency, reliability, and safety of SMR operations through a deeper understanding of human factors in their interaction within digital control room systems. Recognizing the pivotal role of human understanding in this new era of nuclear power, we employed electroencephalogram (EEG)-based monitoring to provide an unparalleled real-time view into operators' cognitive states. By interfacing detailed human models, informed by EEG metrics, with specific operational tasks, we recreate potential operational scenarios using an SMR simulator and capture intricate human responses therein. Our results elucidated the intricate relationship between EEG-derived data and human performance shaping factors, indicating a marked correlation between certain EEG patterns and operational efficiencies. Conclusively, these findings underscore the potential of EEG monitoring not only as a diagnostic tool but as an instrumental aid in the design and operation of future SMR digital control rooms. The insights derived offer a roadmap for the development of practical strategies, ensuring more effective and safer SMR operations.

The need to carry different items, which become an extra load, is a characteristic of trail running. The aim of this study is to determine physiological-metabolic changes produced by running with extra load. Four male well-trained trail runners completed three treadmill maximal metabolic tests carrying different loads (0% (L0), 5% (L5), and 10% (L10) of their body mass) in a weighted vest. Gasses exchange was monitored to assess ventilatory thresholds 1 (VT1), and 2 (VT2), zone of maximal fat oxidation, and peak oxygen consumption (VO2peak). Heart rate (HR), power and velocity (V) were tracked for comparing their behavior. A repeated measures ANOVA showed significant differences in V (p&lt;.001; ηp2= 0.910) as a limitation for reaching peak velocity (Vpeak) with L10 respect to L0 (p=0.001), and L5 (p=0.011). Power expression showed differences (p=0.068; ηp2= 0.592). It tended to be greater with L10 than L0 (p=0.057), despite achieving lower V. VT2 tended to occur at different %VO2peak (p=0.069; ηp2= 0.591). L5 VT2 was reached at higher %VO2peak than L0 (p=0.062), and L10 (p=0.071). ANOVA also showed a tendency to signification for V at this point (p= 0.098; ηp2= 0.538). In conclusion, L10 seems to limit Vpeak while L5 may delay VT2 expression.

The effects of co-addition CeO2 and SiC particles on the morphology, surface cracks, microstructure, precipitated phases and wear property of plasma beam spraying Fe55-based coatings on 1025 steel were investigated by optical microscopy (OM), scanning electron microscopy (SEM), energy-dispersive X-ray spectrometer (EDS), ultra-deep field microscope and wet sand rubber wheel friction tester, respectively. The results showed that the dendrite exhibited a directional growth pattern perpendicular to the substrate and the transitional states of microstructure with the co-addition CeO2 and SiC particles. With addition of CeO2 or SiC affected the flowability of molten steel at macro level, leading to a reduction in the liquid phase diffusion coefficient DL of Cr and C and resulted in a decrease in the G/R ratio. The dendrites changed into equiaxed grains. The main phase composition of Fe55 welding layer is Cr7C3, γ-Fe. The grain boundaries consisted mainly of a reticular eutectic structure. The worn-out uniformly surface of the Fe55+1.5 wt% SiC+0.01wt% CeO2 with Ra was 0.28 μm was smoother than that of other samples. The sub-wear mechanisms during the friction process were microploughing and microcutting. The hardness and toughness of Fe55+1.5 wt% SiC+0.01wt% CeO2 were well-matched, avoiding excessive microcutting and microplastic deformation.

High-performance insulation and airtight building envelopes are the two most important factors to optimize the building energy efficiency and thermal performance. However, thermal performance of building envelopes can be significantly affected by thermal bridging. Thermal bridges can take place at different locations of the building envelope, causing added transmission losses, increasing heat flow, lower inner surface temperatures. Thermal bridges are regarded in all national regulations for new buildings of all states of European Union (EU) but there are no specifications assessing balconies to wall junctions and the impact on the building thermal performance is not well regulated. In this paper, balcony to wall thermal bridge assessment using infrared thermography is highlighted. The originality is that, infrared thermography, has been applied to a real living latest building in the north east of France showing that there is noncompliance in the national regulations as some exigencies are not met. Thermography of thermal break windows and window doors has also revealed air leakage. The goal, is to illustrate that thermal imaging is a means of quality assurance to new building specifications and should include a clause specifying quality assurance procedure for balconies junction in national building regulations for all states if the EU.

To achieve a fast testing on barrier properties of organic coatings, immersion test, AC-DC-AC test, and coupled test of AC-DC-AC with hydrostatic pressure were conducted in seawater for a glass flake epoxy coating. Electrochemical impedance spectroscopy (EIS) was used to characterize the degradation processes of the coating during the tests, and the surface of the coating was analyzed using optical microscope, scanning electron microscope (SEM) and Fourier transform infrared spectrometer (FTIR). The results show that the periodically cathodic polarization coupled with high hydrostatic pressure can accelerate the degradation of the coating by facilitating the diffusion and uptake of electrolyte and the delamination of the coating. The coupled test method has the largest acceleration due to the synergetic effect of AC-DC-AC and hydrostatic pressure.

Supplements in fish nutrition can help alleviate pressure on the wild stock; however, there is limited information on the benefits of rooibos tea extract in aquafeed. This study aimed to determine the effect of rooibos tea extract inclusion in the commercial diet on the growth performance of larval fish. Fish were reared on three diets: a commercial diet with 30% fermented or green rooibos extract and a commercial tilapia diet (control). Fish (initial weight of 0.54 ± 0.008 g and length of 2.22 ± 0.01 cm) were randomly distributed into recirculating aquaculture systems in triplicates at 100 fish per tank. Fish was hand-fed thrice daily for eight weeks at 2% body weight. After that, samples were withdrawn to measure growth parameters. Fish-fed fermented, and green tea extracts exhibited a significantly (p ˂ 0.05) higher weight gain than the controls. The feed conversion ratio was higher in the control group, fermented (1.50 ± 0.25 cm) and green tea (1.41 ± 0.07 cm). Similarly, the control group exhibited the highest condition factor (K=13.14 ± 4.87). The two treatment groups were comparable (p &gt;0.05) in growth performance. Overall, the evidence indicates that adding rooibos tea extracts to the basal diet can improve fish growth.

Instrumental activities of daily living (IADL) training is critical in clinical practice of occupational therapy (OT) for stroke patients. In the conventional approaches, the therapists simulate various occupational tasks in their healthcare settings or reach their nearby real circumstances for the training. As an alternative technology, immersive virtual reality (IVR) has been used widely in stroke rehabilitation for years; however, limited research has compared occupational performances between virtual and real environments. Our team has established a novel IVR shopping training system for stroke rehabilitation. We recruited 10 stroke patients from our department to test the system. All patients attempted to implement shopping tasks in the virtual and real environments respectively. The Wilcoxon test showed no significant differences between virtual and real environments in memory capacity and time-consuming for implementing tasks, and memory capacities in virtual and real environments presented excellent correlations with the IADL assessment. This study suggests that IVR shopping tasks can be used as an alternative approach in rehabilitation when there is limited resource for implementing shopping training in a real environment, while the psychometric property, clinical effect and the effect transferred to the real environment induced by virtual training require further study.

Background: to know the existing documentation related to exogenous melatonin in the performance of professional soccer players. Methods: critical and systematic review. Data were obtained by looking up the following bibliographic data bases: Web of Science, MEDLINE (via PubMed), Embase, Cochrane Library and Scopus. The used terms were "Soccer Athlete", "Melatonin" and "Soccer Performance", using as a filter: "Humans". The search update was in May 2023. Results: having applied the inclusion and exclusion criteria, 8 articles were selected out of 59 retrieved references. The dose of melatonin administered in the studies ranged between 5 and 8 mg. The outcomes showed a decrease in oxidative stress, muscle damage and inflammatory markers in the melatonin-treated group. Conclusions: Exogenously administered melatonin seems to attenuate some of the effects derived from physical exercise such as oxidative stress, inflammation and muscle damage in professional soccer players, and since it has no potential adverse effects, it could be interesting to apply it in this population. However, the direct effects of melatonin supplementation on physical performance have not been demonstrated, so more research is needed on the intervention period, effective dose and larger participant populations.

To determine the impacts of metabolizable energy levels on the performance indices of geese and to forecast the ideal range of dietary metabolizable energy levels, this study was carried out. Literature on the effects of dietary metabolized energy level on the performance of geese was searched from CNKI, Wanfang, VIP, PubMed, Web of Science, and ScienceDirect databases from January 1, 2000, to December 31, 2022. A dose-response meta-analysis was performed by STATA (14.0), data were calculated by the robust error meta-regression model (REMR), and nonlinear dose-effect curves were plotted by the restricted cubic spline method (RCS). 29 papers were chosen from the 1,475 literatures that fit the criteria and were included in the dose-response meta-analysis. There were 6,079 geese included in the sample. The following production performance indices included average daily gain (ADG), average daily feed intake (ADFI), feed-to-gain ratio (F/G), dressed percentage, percentage of half-eviscerated yield, percentage of eviscerated yield, percentage of breast muscle, percentage of leg muscle and percentage of abdominal fat. The Egger test assessed publication bias, while sensitivity analysis was used to examine the heterogeneity. The verified results are consistent and reliable. The results indicated that for each group, the optimal dietary metabolizable energy level was about 13 to 13.5MJ/kg for medium-sized geese aged 0 to 4 weeks, 12 to 13MJ/kg for medium-sized geese aged above 5 weeks, 12.5 to 13MJ/kg for small-sized geese aged 0 to 4 weeks, and 13 to 13.5MJ/kg for mall-sized geese over 5 weeks of age. Future research should be conducted on related diets of large-sized geese, small-sized geese, and higher metabolizable energy levels.

The study investigated the effect of a multi-strain probiotic compound containing Bacillus coagulans, Enterococcus faecalis, Clostridium butyricum and Bacillus mesentericus as in-feed zinc oxide (ZnO) alterna-tive on growth performance, diarrhea incidence, antioxidant status, lipid profile, stress and immunity in weaned piglets. A total of 72 piglets were randomly divided into 3 groups with four replicates of six piglets each. The details of the groups were as follows; (i) weaned control group (WC) received basal diet, (ii) weaned probiotic group (WB) received basal diet and probiotics and (iii) positive control (PC) group received basal diet with 2500 mg/kg ZnO. The experiment lasted for 28 days. Probiotic supple-mentation improved growth performance and reduced diarrhea rate. Probiotics supplementation im-proved lipid profile; significantly lower levels of total cholesterol and low-density lipoprotein cholesterol and higher level of high-density lipoprotein cholesterol in WB group as compared to those of the control group (WC) were recorded. Probiotic supplementation stimulated antioxidant defense system by in-creasing total antioxidant capacity and decreasing lipid peroxidation. Probiotic supplementation down-regulated the stress biomarkers like serum cortisol and serum heat shock proteins. WB group showed higher serum levels of IgG and IgM throughout the study period and higher IgA at day 28 as compared to WC. These data suggest that supplementation of the probiotic minimizes the weaning stress, thereby improves the growth performance, lipid profile, antioxidant status and systemic as well as mucosal immunity. Therefore, the multi-strain probiotic compound may be used to replace ZnO in weaned piglets.

The purpose of this study was to evaluate the financial performances of the publicly held healthcare companies in crisis periods in Türkiye. The 2018 Economic Crisis and the COVID-19 pandemic crisis were included in the study as the crisis periods. We collected the financial data of the publicly held healthcare companies and calculated three liquidity, three turnover, three leverage and three profitability ratios by ratio analysis to use as financial performance indicators. We then conducted Wilcoxon signed-rank tests and we did separate analyses for the 2018 Economic Crisis and the COVID-19 pandemic crisis. The results of the analyses showed that there were no statistically significant differences between the publicly held healthcare companies’ liquidity, turnover, leverage, profitability ratios and thus their financial performances before the crises and after the crises. While the results are reassuring and give valuable insights to managers and policy makers to determine the areas that needs to be strengthened to be better prepared for possible future crises, our sample was limited. Therefore, this study presents an exploratory foundation for future studies which are needed to make a case of financial stability for the publicly held healthcare companies before and after the crisis periods.

This paper aims to provide a systematic review of the literature on school effectiveness, with a focus on identifying the main factors that contribute to successful educational outcomes. The research question that this paper aims to address is: What are the main factors of school effectiveness? The research was interested in several descriptors such as school, effectiveness/efficiency theories, effectiveness/efficiency research, and factors. Studies were reviewed through two databases: JSTOR and ERIC (published within the 2016-2022 period). The paper defines several categories that are exposed within school effectiveness research. Within these categories, various factors that affect the students’ outcomes and the defined effectiveness at school are listed. As the results show, the issue of school effectiveness is a multifaced challenge as the effectiveness of schools is a complex concept that can be measured through various indicators such as academic achievement, student engagement and teacher satisfaction. The review of school effectiveness has revealed that several factors contribute to effective schools, such as strong leadership, effective teaching practices, a positive school culture and parental involvement. Additionally, school resources, such as funding and facilities, can impact school effectiveness, particularly in under-resourced communities.

This paper introduces a novel approach to addressing the challenge of accurately timing short distance runs, a critical aspect in the assessment of athletic performance. Electronic photoelectric barriers, although recognized for their dependability and accuracy, have remained largely inaccessible to non-professional athletes and smaller sport clubs due to their high costs. A comprehensive review of existing timing systems reveals that claimed accuracies beyond 30 milliseconds lack experimental validation across most available systems.To bridge this gap, a mobile, camera-based timing system is proposed, capitalizing on consumer-grade electronics and smartphones to provide an affordable and easily accessible alternative. By leveraging readily available hardware components, the construction of the proposed system is detailed, ensuring its cost-effectiveness and simplicity. Experiments involving track and field athletes demonstrate the proficiency of the proposed system in accurately timing short distance sprints. Comparative assessments against a professional photoelectric cells timing system reveal a remarkable accuracy of 62 milliseconds, firmly establishing the reliability and effectiveness of the proposed system. This finding places the camera-based approach on par with existing commercial systems, thereby offering non-professional athletes and smaller sport clubs an affordable means to achieve accurate timing.In an effort to foster further research and development, open access to the device's schematics and software is provided. This accessibility encourages collaboration and innovation in the pursuit of enhanced performance assessment tools for athletes.

Although buildings constitute 35% of global energy use and 38% of carbon emissions from energy, the amount of energy and energy-related carbon emissions are increasing rapidly. On the other hand, non-renewable usable energy resources are decreasing on the contrary. New buildings are being built due to the increasing population and the existing building stock not meeting the needs or losing its lifespan. Some of the existing building stock is demolished and renewed for structural reasons and some for reasons such as usage performance. It is possible to reduce both energy consumption and greenhouse gas emissions with strategic energy uses in existing building stocks. There are various techniques to measure the maximum performance of sustainable and energy-efficient use of existing building stocks with which changes. Building Information Modeling (BIM) technology is one of these techniques that provides wide opportunities to users in recent years, and it is almost a virtual laboratory of structures. Building stocks can be modeled with BIM, and alternative shell and system suggestions can be used to measure how building performance has changed and to achieve the best results. In this research study, improvement scenarios that optimize energy use in existing building stocks are investigated on a sample residential building by using the virtual laboratory facilities of BIM. After measuring the current energy performance of the existing building with BIM tools, 192 alternative results were obtained with 6 variables (external walls, roof, insulation layers, transparent surface materials, lighting, and photovoltaic panels). The obtained alternatives were compared with the current state of the existing building. The material expenditures and amortization periods required for these alternative scenarios are also calculated. The results obtained were evaluated according to annual / lifetime energy consumption, fuel, electricity, initial investment costs, energy use intensity, and carbon emission amounts. With the optimization of the current situation of the sample building, annual fuel consumption decreased by 61% and electricity consumption by 64%. The amortization period of the optimum improvement was determined as 12 years.

To prepare an edible coating with a good preservative effect on sweet cherries, carboxymethyl chitosan (CMCS) and gelatin (GL) were selected as the film-forming matrix in this experiment, and CaCl2 and ascorbic acid (AA) were added as crosslinking agents and antioxidants, respectively. First, the film was prepared by the casting method, and the film formula with better mechanical and barrier performance was filtered out by one-factor and response surface optimization test, and the differences in the preservation effect of different film formulations (CMCS-GL, CaCl2- CMCS-GL, AA -CaCl2- CMCS-GL) on sweet cherries were compared. and then the different film formulations were compared. The difference in film formulation on the preservation effect of sweet cherries was investigated. The results showed that the optimal formulation for an edible film based on CMCS-GL with good performance was CMCS: GL (w:w)=2:1, with the additional amount of 1% glycerol, 2% CaCl2, 0.1% Tween-20, 2% AA, the tensile strength, elongation at break, oxygen permeability and water vapor permeability of the film obtained with this formula were: 16.28 MPa, 71.46%, 1.39×10-12 g- cm/(cm2-s-Pa), 5.10×10-11 cm3-cm/(m2-s-Pa), respectively. In the preservation of sweet cherries, all three film formulations effectively reduced the rotting rate and weight loss during storage while preserving the high hardness and skin color of the fruit. Among them, the formulation AA -CaCl2- CMCS-GL showed the best preservation effect and can be used as a new method for postharvest preservation of sweet cherries.

In this dynamic 21st Century global economy, managers of insurance companies cannot afford to ignore the involvement of their employees in strategic change programmes. The employee's voice in strategic change programmes is now a prerequisite for organizational performance. This study seeks to determine the effect of employee involvement in strategic change programmes through participation in decision-making, teamwork, communication, creativity, and innovation. The research approach used was quantitative to collect data from 115 respondents using a 5-point Likert scale questionnaire. The study employed the multiple regression method to analyse data using the IBM SPSS V28 software. All five constructs of employee involvement had a significant effect on the performance of insurance companies in Zimbabwe. The study findings will convince top managerial leaders of the insurance industry to acknowledge and appreciate the importance of involving employees in strategic change programmes. Besides, industry regulatory authorities can advocate for policies that encourage employee involvement in decision-making.

The thermal properties of a building envelope are key indicators of the energy performance of the building. Therefore, methods are needed to determine quantities like U-values or heat capacitance in a fast, reliable way and with as little impact on the use of the building as possible. In this paper a technique is proposed that relies on a simplified electrical analogical model of building envelope components which can cover their dynamic thermal behavior. The parameters of this model are optimized to produce the best fit between simulated and measured outside surface temperatures. As the temperatures can be measured remotely with an infrared camera this approach requires significantly less installation effort and intrusion in the building than other methods. At the same time, a single measurement provides data for a large range of locations on a facade or a roof. The paper describes the method and a first experimental implementation of it. The experiment indicates that this method has the potential to produce results which have an accuracy that is comparable to standardized reference methods.

Single parenting is a social phenomenon that has always been in existence and is as old as mankind, and today the number of single-parent families has been rampantly increasing. As a result, the researcher conducted a study in the Gambella region of Ethiopia to investigate the economic and educational implications of single parenting on female adolescent students. The study employed a qualitative research approach with a case study research design. The researchers used the purposive sampling technique to select the research area and research participants for in-depth interviews and focus group discussions, and eleven interviewees, seventeen participants in focus group discussions within two groups, and seven key informants participated. Interviews were audio-recorded, transcribed, translated, and thematically analyzed. Interviews with research participants revealed that adolescent girl students from single-parent homes experience financial difficulties. The study also explored that students with single parents are more likely to be absent from school, to come late to school, to score low marks, and to drop out of school. Therefore, having an understanding of the benefits of having intact parents for the well-being of adolescents and raising children together should be advocated.

The newly developed friction-interlocking armor unit, called ‘Double cube’ (DC), has been designed to improve the performance of the concrete armor unit used in river/marine structures against currents/waves actions. DC unit, is an octagonal-shaped block, made up of two parts: an upper cube set on a lower base that is either square or octagonal in shape. The innovative design aims to provide a good performance in terms of stability, high tolerance placement with various contact points and ease of placement. DC’s shape and placement enhance the stability by bringing the center of gravity closer to the underlayer and providing a large contact surfaces with surrounding blocks that reduce the chance of extraction and limit movements (rocking, lifting) via "keystone" effect. The characteristics of this new unit provides a relatively high hydraulic stability number for the armor layer (NS=2.9), a favorable hydraulic performance due to energy dissipation from turbulence and aeration, as well as a high roughness coefficient (γf≈0.46) helping to reduce the overtopping.

Injection molding is one of the most common and effective manufacturing processes used to produce plastic products and impacts industries around the world. However, injection molding is a complex process that requires careful consideration of several key control variables. These variables and how they are utilized greatly affect the resulting parts of any molding operation. The bounds of the acceptable values of each control process variable or CPV must be analyzed and delimited to ensure manufacturing success and produce injected molded parts efficiently and effectively. One such method in which the key CPV of an injection molding operation can be delimited is through the development of a process window. Once developed, operating CPV at values inside the boundaries of the window or region will allow for the consistent production of parts that comply with the desired performance measures (PM), promoting a stable manufacturing process. This work proposes a method to experimentally develop process windows and illustrates the methodology with a specific molding operation.

The aim of this study was to verify the effects of blood flow restriction on movement velocity and muscle activity during the back-squat exercise. Methods: Twenty-four university students participated in this study. In two randomized 72-hours apart sessions, participants performed a 4-set protocol consisting of 30-15-15-15 repetitions performed at 30% of their one-repetition maximum in the back-squat exercise. In both sessions, neuromuscular function was monitored by surface electromyography (EMG) and movement velocity (mean propulsive velocity [MPV], peak concentric velocity [Vmax] and the effort index [EI]). Blood flow restriction (BFR) was applied during exercise in one of the experimental sessions with 80% of full arterial occlusion pressure over lower limbs. Results: BFR condition showed higher (p&lt;0.05) EI, peak and rooted mean square normalized EMG in set 1 compared to set 2. Similar MPV and Vmax were observed at each set for both BFR and control conditions. No significant differences were observed between conditions at any set. Conclusions: BFR did not imply changes in neuromuscular performance during low-intensity resistance training, but it might induce greater intra-series velocity loss and less activation of the muscles involved.

The purpose of this study was to see how feeding cotton gin trash (CGT) as an alternative meal affected the growth performance, carcass features, and meat quality of Mecheri ram lambs. A growth performance trial was conducted with thirty-two weaned Mecheri ram lambs from four months to nine months (180 days) of marketing age and assigned into four groups (T1, T2, T3 and T4) of eight animals in each group. The lambs were fed with CGT at 0 (T1), 25 (T2), 50 (T3) and 75 (T4) per cent inclusion levels in the roughage portion at 60:40 roughage: concentrate ratio. All the group of animals were fed on dry matter requirement basis at four per cent of their body weight. The lambs fed with 75 (T4) and 50 (T3) per cent inclusion level of CGT showed signifi-cantly (P<0.01) higher total body weight gain (kg) than T1 (14.54) and T2 (15.05) groups. The av-erage daily gain (g) of lambs in T3 (99.24) and T4 (105.51) were significantly (P<0.01) higher than T1 (80.77) and T2 (83.61) groups. Over the course of the 180-day trial period, there was no statisti-cally significant difference in the average DMI (g) between the groups (P>0.05), however the lambs in T4 demonstrated higher feed efficiency (7.4) than the T1 (9.3) group. The slaughter studies revealed that the lambs in T4 followed by T3 group registered significantly (P<0.01) higher hot carcass weight, dressing percentage and Meat: Bone ratio than T2 and T1 group ani-mals. The weights of the liver, spleen, head, stomach, and intestines empty were considerably (P<0.05) larger in the T3 and T4 groups than in the other groups, although there was no signifi-cant (P>0.05) difference in the weights of edible and inedible offals. Meanwhile, there were no significant variations (P>0.05) in pH, water holding capacity, shear force value, sensory charac-teristics, or proximate composition of meat across treatment groups. In accordance to the find-ings, CGT can be added up to 75% of the roughage component in sheep feed as an effective un-conventional supplementation, as it improves body weight, feed efficiency, and carcass characteristics in Mecheri ram lambs.

Since the early 21st century, the globalization trend and technological innovations have changed the ways and speed of market growth. Rapid market expansion and the pressure for firms to achieve sustainable business growth via mergers and acquisitions have become the norms for acquiring the necessary competencies, expanding market shares and business integrations. This study explains the factors that correlate to the IJM's financial performance based on the market dynamics in recent years. This case study is a qualitative approach employing systematic review and content analysis. As a result, firms begin to diversify or venture into the business segments that might be related to or complement their core businesses, intentionally or unintentionally, which eventually evolved into the conglomerate form. This case study provides a financial performance analysis of IJM Corporation Berhad's success and challenges from its conglomerate business model. The fact that a well-diversified firm will have better risk management in the event of an economic downturn is also a primary driver for firms to embark on a corporate diversification strategy. This case study reveals IJM's conglomerate model has been successful during its rapid business growth; however, it has shown signs of diminishing in recent years.

Development of Halal Tourism in Indonesia is the focus of the Indonesian government and MSMEs have an important role in supporting the development of halal tourism in Indonesia. This study aims to examine the relationship between marketing communication and Islamic financial literacy on Islamic financial inclusion and MSMEs performance in the halal tourism sector. A covariance-based SEM technique utilizing LISREL software was used to analyze the data from this investigation. Non-probability sampling was employed to collect the data, and the sample consists of 152 halal tourism entrepreneurs. We find that positive and significant association between Islamic financial inclusion and business performance. We also find that there are a positive and significant association between Islamic Financial Literacy and Islamic Financial Inclusion. Marketing communication and Islamic financial inlcuon a positive relationship but insignificant. This studi implies that to establish a halal tourist ecosystem for long-term development in Indonesia, commercial actors must lend their full support. This study demonstrates that they can thrive when MSMEs in the halal tourist ecosystem are backed by Islamic banking and Islamic rural banks. As a result, a more accommodating approach from Islamic banking is required to provide access to halal finance for business actors in Indonesia’s halal tourism ecosystem.

The use of isolated supplements to enhance performance is widespread among athletes. The aim of this study was to increase knowledge about the combined effects of caffeine and New Zealand blackcurrant (NZBC) dietary supplements. In this study, two subjects each underwent four phases of four sessions in a double-blind and randomized alternating treatment single-case design. After a 3-week pre-test phase, the supplement combinations of placebo/placebo, caffeine/placebo (5 mg/kg), NZBC/placebo (600 mg), and caffeine/NZBC (5 mg/kg + 600 mg) were taken and weekly performance tests were conducted to examine their effects on relative power (W/kg) during a 20-minute time trial on a bicycle. Data were analyzed descriptively and using the Tau-U calculator from Single Case Research. The ergogenic effect of caffeine was confirmed in both subjects, with increases of 3.3% and 6.5%, while the positive effect of NZBC on performance was only seen in one subject (13.4%). The combination of caffeine and NZBC again increased performance in both subjects (2.2% and 19.2%), but the data only showed an additive effect of the supplements in one subject. Further studies are required to confirm or refute this evidence of the synergistic effects of these supplements.

Pyrolyzed waste biomass, or biochar, has been suggested as a means to increase plant growth and to mitigate soil salinization, which is a widespread agricultural issue and can reach extreme levels in urban soils impacted by de-icing salts. Soil mixing is enhanced by reduced biochar particle size; however, biochar properties vary with particle size and recent studies suggest that plant growth responses may be maximized at intermediate particle sizes. We examined the responses of two plant species (cowpea (Vigna unguiculata) and velvetleaf (Abutilon theophrasti)) to biochar amendments that spanned a wide range of particle sizes obtained by sieving, with and without de-icing salt additions. The smallest size fractions of biochar reduced plant growth relative to unamended controls. Plant biomass production was generally maximized at intermediate biochar particle size treatments, with particles sizes of 0.5-2.0 mm showing the best response. Mitigation of salt effects was also improved at intermediate biochar particle sizes in this particles size range. Our results emphasize the importance of optimizing biochar particle size to best enhance plant responses to biochar, with particular reference to saline soils.

The unique physical demands of soccer necessitate optimal nutrition strategies for enhancing players' performance, recovery, and overall health. However, the effects of nutrition interventions on professional soccer players remain underexplored. This review aims to synthesize the current literature on the impact of nutrition interventions on professional soccer players' performance to inform future research and practical applications. The review will follow the PRISMA guidelines and the Cochrane Handbook of Systematic Reviews. We will employ a four-part search strategy to identify relevant studies, including electronic bibliographic databases, trial registers, the web of clinical trials, and bibliography screening. Inclusion criteria will encompass randomized clinical trials involving professional or semiprofessional soccer players utilizing a nutrition or diet intervention. Quality assessment will be conducted using the Risk of Bias 2 (RoB 2) tool. A narrative synthesis will be provided, detailing the intervention types and their effects on performance. This review will offer a comprehensive understanding of the potential benefits of nutrition interventions for soccer professionals, helping coaches, nutritionists, and players to tailor their approaches for optimal performance and recovery.

The Covid-19 health crisis and its related confinement measures and policies has had a significant impact on the telework adoptions rates, where many businesses were affected abruptly without being prepared, resulting in numerous ad-hoc applications especially while assessing employee’s performance and productivity while working remotely. The difficulties that have emerged with the pandemic have revealed the fragility of the traditional performance appraisal process and the unintentional existence of proximity bias. The Lebanese liquidity crisis is an ongoing financial crisis affecting Lebanon that became fully apparent toward late-2019 when large demonstrations erupted amid acute political instability and economic challenges. In light of the compounded simultaneous occurrence of recurring episodes of COVID-19 outbreaks and the ongoing country’s financial liquidity crisis, the standing of the Lebanese banking sector – who played key roles in the Lebanese economy and were long considered as financially sound and stable – has drastically changed. Faced with such a situation, Lebanese commercial banks started contracting both their branch network and human capital base, and thus they been forced to rethink their human capital strategies by implementing new practices allowing them to adapt to this context of crisis. It is in this perspective that the present research work is inscribed, where we explore the main managerial practices and processes implemented within top Lebanese banks to assess their employee’s performance during the compounded simultaneous crises. A thematic qualitative analysis method of an exploratory nature was adopted, and semi-structured interviews were conducted with senior managers from top Lebanese commercial banks. Results were processed using a deductive approach for themes identifications. Accordingly, it was concluded that in such times of acute crisis, Lebanese banks have altered the purpose of their Performance Appraisal Review (PAR) process and have implicitly or explicitly adopted a Forced Ranking method to primarily focus on retaining just the top performers, while placing those at the bottom on probation with the risk of termination.

The objectives of the research are to investigate the characteristics of the board of directors on the financial performance of the enterprise. Using a sample data from 52 construction and real estate enterprises listed on Vietnam stock exchange in the period 2006-2020. Using typical regression methods such as pooled OLS, FEM, REM and assessing the defects of the research model, the FGLS method is selected. At the same time, due to the existence of endogenous phenomena and the nature of interdependence among enterprises in Vietnam, research using the instrumental variables two-step generalized method of moments (IV-GMM) in order to correct for cross-sectional dependence, autocorrelation, endogeneity, and heteroskedasticity in the analysis. Research results suggest that board size, female board members, meeting frequency, and board members' education have a positive influence on financial performance. Moreover, the independence of the Board of Directors increases, the business efficiency decreases. The research also found a positive relationship of tangible fixed assets, and a negative relationship between capital structure choice, firm size and corporate financial performance.

Magnesium and Aluminum alloys continue to be important in the context of modern and lightweight technologies. With the advancement of additive manufacturing (AM), components can be produced directly in a net shape, widen up the usage of magnesium and aluminum alloys as well as holding new ideas for the application of unique physical structures made feasible by 3D printing. Laser-based approach, one of the metal additive manufacturing (AM) methods, enables the formation of arbitrary 3D structures. With promising findings, research in this area is advancing quickly, bringing up a variety of potential applications in both the scientific and industrial sectors. Complex structures can now be manufactured easily utilizing AM technologies to meet the pre-requisite objectives like reduced part numbers, greater functionality, and lightweight, among others. AM has the ability to meet demands by lowering costs and speeding up the manufacturing process. Due to their popularity in numerous high-value applications, aluminum, and magnesium alloys are one of the key material systems being researched in the laser-based additive manufacturing approaches. The review here aims to comprehensively examine the additive manufacturing of magnesium and aluminum alloys, highlighting the influence of the laser-based additive manufacturing approach on the mechanical characteristics, microstructure, and tribological performance of magnesium and aluminum alloys.

COVID-19 had a significant impact on construction projects due to labor shortages and COVID-19 restrictions, yet little is known about the impact it had on construction safety. To address this gap, an Australian construction project was selected to study the impact of COVID-19 on safety performance, safety climate and safety leadership. The study collected data from safety climate surveys, leading and lagging safety indicators and used linear regression to compare safety performance pre and post the onset of COVID-19. Our results showed after the onset of COVID-19 there was a significant reduction (Pr&gt;F at 0.05%) in incident rate, an improvement in supervisor safety leadership and safety climate, and satisfaction with organisational communication. The study identified the increase level of safety awareness due to COVID-19 did not result in an increase in the level of engagement in safety leadership. Interestingly, participation in the safety leadership activities did not improve until a change of Project Manager occurred. The study determined leaders who establish a positive safety climate within a project could negate the safety performance impact of COVID-19. The study confirms the importance of site safety leadership in maintaining engagement in risk management and the value of focused safety communication.

Objective: One of the major causes of cerebral ventricular shunt failure is proximal catheter occlusion. We describe a novel ventricular cerebrospinal fluid (CSF) flow replicating system that assesses pressure and flow responses to varied degrees of catheter occlusion. Methods: Ventricular catheter performance was assessed during conditions of partial and complete occlusion. The catheters were placed into a three-dimensionally printed phantom ventricular replicating system. Artificial CSF was pumped through the ventricular system at a constant rate of 1 ml/min to mimic CSF flow, with the proximal end of the catheter in the phantom ventricle. Pressure transducer and flow rate sensors were used to measure intra-phantom pressure, outflow pressure and CSF flow rates. The catheters were also inserted into silicone tubing and pressure was measured in the same manner for comparison with the phantom. Results: Pressure measured in the phantom ventricle did not change when the outflow of the ventricular catheter was partially occluded. However, the intraventricular phantom pressure significantly increased when the outflow catheter was 100% occluded. Flow through the catheter showed no significant difference in rate with any degree of partial occlusion of the catheter. At the distal end of the partially occluded catheters, there was less pressure compared with the nonoccluded catheters. This difference in pressure in partially occluded catheters correlated with the percentage of catheter hole occlusion. Conclusions: Our model mimics physiological dynamics of the CSF flow in partially and completely obstructed ventricular catheters. We found that partial occlusion of the catheter had no effect on CSF flow rate, but did reduce outflow pressure of the catheter.

The present study aims to examine the role the social and digital infrastructures might have during the building process of the Smart Regions in the Italian context. Within this framework, it is possible to identify some essential research questions, such as why the same regions are growing faster than the other and which type of effects could be generated from the different connectivity between the regions. Since the Smart Region concept is still composed of technical reports, pilot projects and experiences from a limited number of cities on the international stage, this work it is tried to use a new approach, applying either a neuronal model, the Self-Organizing Maps, and the multivariate regression approach, to extrapolate the existence of possible future conditions for the rising of Smart Regions in Italy, studying the evolution of the used database during the period 2005 – 2016. From the analysis what emerged is that the only bridging social capital dimension, empirically speaking, feed the regional innovation growth because the structure of social relationship facilitates interactions across social, political and economic agents; but there are institutional deficits, most pronounced in Italy and other European countries.

Background: Transcranial direct current stimulation (tDCS) is a neuromodulatory technique that delivers low levels of a constant current via scalp electrodes to specifically targeted areas of the brain. The effects of tDCS on whole-body exercise performance has been of interest in recent literature. The purpose of the current investigation was to investigate if tDCS, administered via Halo Sport, influences time trial performance in trained cyclists, and if changes in exercise performance are associated with prefrontal cortex (PFC) activation and/or muscle oxygenation (SmO2). Methods: Twelve recreationally trained cyclists volunteered to participate in two 10-kilometer time trials following 20 minutes of tDCS or a sham condition. Results: T-tests showed there was no significant difference in performance (time to completion) or physiological measures (BLa-, HR, SmO2, PFC oxygenation) between the Halo and sham conditions. Conclusions: These results indicate that the application of tDCS via Halo Sport does not induce changes in exercise performance or related physiological parameters during a 10-kilometer cycling time trial.

The impact of organizational accreditation and professional certification and the evidence-based measurable impact of those for both academic programs and affiliates is one of specific interest to universities and individuals in the healthcare management field [1]. The authors’ analysis examined the impact of hiring graduates from higher education programs that held external accreditation from the Commission on Accreditation of Healthcare Management Education (CAHME). Graduates’ affiliation with the American College of Healthcare Executives (ACHE) professional healthcare leadership organization was also assessed as an independent variable. Study outcomes focused on these graduates’ respective healthcare organization’s performance measures (cost, quality, and access) to assess the researchers’ inquiry into the perceived value of a CAHME-accredited graduate degree in healthcare administration and a professional ACHE affiliation [2]. The results from this study found no effect of CAHME accreditation or ACHE affiliation on healthcare organization performance outcomes. The study findings support the need for future research surrounding healthcare administration professional graduate degree program characteristics and leader development affiliations, as perceived by various industry stakeholders.

: The purpose of this research was to verify the importance and performance of crisis management in Korean fitness center using Importance-Performance Analysis (IPA). For this study, 304 fitness center executives and managers in Seoul and Gyeonggi region were selected as from March 21 to May 17, 2020. Frequency analysis was performed using SPSS 24.0 and exploratory factor analysis was conducted to verify the validity and reliability. Priority analysis and IPA analysis were performed to compare the mean values, and the following results were obtained. First, in the first quadrant, there were 6 attributes besides keep social distancing between employees and customers. Second, in the second quadrant, there were four attributes in addition to regular disinfection of the gymnasium. Third, in the third quadrant, there were 6 attributes besides maintain furniture clean. Third, there were 6 attributes other than maintaining furniture clean in the third quadrant. Fourth, in the fourth quadrant, there are three attributes in addition to the restriction of face-to-face meetings. The conclusion is as follows. First, equip supplies for prevention of covid19, keep social distance, and check government support policies. Second, analyze of economic support policies, and research on their application methods. Third, Prepare various non-face-to-face communication methods and Untact(non-contact) marketing strategies. Fourth, make a checklist for factors with relatively little importance.

The purpose of this study is to examine the driving model of determinant factors that affects the performance of small and micro enterprises empirical evidence from Amhara Region, Ethiopia. The study used primary and secondary data from manufacturing, construction, urban agriculture, trade, and service entrepreneurs found in Bahirdar, Dessie & Gonder Cities using a purposive sampling technique. It also used the descriptive research design with a self-administered survey questionnaire. The Statistical analysis tools, SPSS and Amos, software were applied to analyze the data. Multiple regression model results revealed that access to credit, initial capital, working premises, industry category, market linkage, ICT adoption have a positive relationship and a major impact on the Amhara region's enterprise performance. Hence, the outcome variable, enterprise performance, is highly affected by all predicted variables. As the study finding shows, a lack of access to credit, , market linkage, working premises), initial capital, and information communication Technology problems are critical challenges of SMEs. The Regional Government, TVED Bureau, Micro Finance Institutions, , should take corrective action to provide sufficient credit and long-term loans to protect inflation. Moreover, this study proposed a sustainable cluster management approach that solves their challenges in an integrated way.

Aquaculture is one of the fastest-growing animal food-producing agricultural industries in the world and proper performance of fish in morphological, physiological and immunological aspects is important for fish production and sustainable expansion of aquaculture. But several inhibitors like disease, pathogen, and adverse environment can overpower these performances. At present, antibiotics in preventing these inhibitors have been seen as becoming favorable to those inhibitors. So, Bacillus, an important group of probiotic bacteria can be an alternative to these antibiotics in aquaculture. Bacillus has been seen used in different experiments, mainly as a supplement in feed at various concentrations. Bacillus showed effective results like improved growth with minimum cost, improvement in reproduction, hematology, improved immune response and disease, and stress resistance as well as better proximate composition in different fish species. Application of Bacillus strains has proven efficient in improving water quality by reducing ammonia and nitrite toxicity, harmful algal blooms and utilization of H⁺ ion. Larger application of probiotic Bacillus instead of the hazardous synthetic chemicals would promote eco-friendly low-input sustainable aquaculture for food and nutritional security of the increasing world population. So many more experiments should be conducted in commercially important fishes for better growth and health of fishes which will certainly increase fish

(1) Background: The aim of the present study was to evaluate the effect of different types of warm-ups on the strength and skin temperature of Paralympic powerlifting athletes; (2) Methods: The participants were 15 male Paralympic powerlifting athletes. It was analyzed the effects of three different types of warm-up (without warm-up (WW), traditional warm-up (TW), or stretching warm-up (SW)) on static and dynamic strength tests as well as in the skin temperature, which was monitored by thermal imaging; (3) Results: show no differences in the dynamic and static indicators of the force in relation to the different types of warm-up. No significant differences were found in relation to the Peak Torque (p = 0.055, F=4.560, η2p= 0.246 medium effect), and 1-Repetition Maximum (p = 0.139, F=3.191, η2p = 0.186, medium effect) between the different types of warm-up. In the thermographic analysis, there was a significant difference only in the Pectoral muscle clavicular portion between the TW (33.04 ± 0.71ºC) and the WW (32.51 ± 0.74ºC) (p = 0.038). The TW method also presented slightly higher values than the SW and WW in the Pectoral Muscles Sternal portion and in the Deltoid anterior portion, but with p-value &gt; 0.05; (4) Conclusions: that the types of warm-up studied do not seem to interfere with the performance of Paralympic Powerlifting athletes. However, the thermal images showed that traditional warm-up best meets the objectives expected for this preparation phase.

The use of principal components analysis provided information about the main characteristics of teams, based on a set of indicators, instead of displaying individualized information for each of these indicators. In this work we have considered reducing an extensive data matrix to improve interpretation, using the principal components analysis. Subsequently, with new components and with a multiple linear regression, we have carried out a comparative analysis between the best and bottom teams of LaLiga. The sample consisted of the matches corresponding to the 2015/16, 2016/17 and 2017/18 seasons. The results showed that the best teams were characterized and differentiated from bottom teams in the realization of a greater number of successful passes and in the execution of a greater number of dynamic offensive transitions. The bottom teams were characterized by executing more defensive than offensive actions and showing a fewer number of goals, a greater ball possession time in the final third of the field. Goals, ball possession time in the final third of the field, number of effective shots and crosses are the main performance factors that influence the offensive success of football. This information allows us to increase knowledge about the key performance indicators in football.

The era of globalization of the industrial revolution 4.0 was also marked by rapid economic, social, scientific, and technological developments. Currently, the company was demanded to maximize all its potential to compete with other companies. For this reason, it was hoped that companies could understand the importance of knowledge management-based intellectual capital through outreach, externalization, internalization, and combinations that had implications for improving employee performance and competency. This study was to identify and describe the enhancement of performance and competency-based on the optimization of the intellectual capital model in terms of critical thinking analysis. This study used a qualitative approach with critical thinking analysis through literature study methods. The findings results of this study were to improve performance and competency were the basic measurement models of intellectual capital, new intellectual capital measurement models in empirical studies, intellectual capital measurement models with bottlenecks, and environmental-based intellectual capital models. This study concluded that intellectual capital measurement should be determined as accumulation and interpretation in the proposed model for a company that was an applied subject with a qualitative intellectual capital index system, to provide a good tool for companies to managed intellectual capital.

Computer vision is considered as an ally to solve business problems that require human intervention, intelligence and criteria. This topic of research has evolved in XXI century at faster peace, delivering various alternatives from open source until commercial platforms. With so many options and market growing, it result difficult to make a decision on which one to use, or even worse, realize it was not suited for different scenarios. In this paper we analyze five options selected arbitrarily and tested on a dataset of 755 images to detect persons in an image, using object detectors. We analyze elapsed time to process an image, error with observations by humans, number of persons detected, correlation of time and person density, object detected size and F1 Score, considering precision and recall. As we found there are score ties and similar behaviors among options available, we introduce a novel index that takes in consideration the number of persons and their pixel size, to propose the Vision Acuity Index of Computer Vision. The results demonstrate this is a good option to serve as indicator to make decisions. Also, this index proposed have a potential to be expanded for different business use cases, and to measure new proposed algorithms in the future along with the traditional metrics used previously.

This paper aimed to use social media impact on student studies in higher education. Apart from enjoyment and academic purposes, many educational practices and processes have been influenced by social networks. This paper highlighted the use of media tools in higher education as well as indicates out some of the factors. Moreover, through a literature review of related articles, we aim to provide insights into the impacts of a social network on educational quality, actual use of social media, and performance impact in higher education. A questionnaire survey on constructivism was circulated among a total of 206 university students as the key method for collecting data. This research hypothesizes educational quality and actual social media use indicates a positive effect in education, all of which also hypothesizes constructivism for educational quality and actual social media that in turn improve students’ satisfaction, and performance impact. Moreover, all research findings were attained through a quantitative method using the Structural Equation Modeling (SEM-AMOS). Findings of this research to indicate a positive effects students on their academic through behavioral intention to utilize social media to actual social media use for teaching and learning on higher education. Moreover, the results mention the use of social media for learning purpose, as well as social media to enables the sharing of knowledge, discussions, and information to enhance students' learning activities, Further studies are recommended which universities educators should take this into consideration when planning their curricula; it comes to the inclusion of technology in the teaching process.

Background: The purpose of this study was to evaluate and compare the performance of health, safety and environmental management of civil, traffic and urban services contractors in the 18th district of Tehran municipality in 2015-2016. Methods: This is an applied, longitudinal, descriptive-comparative study. The statistical population of this study was construction contractors, urban services and traffic in the municipality of district 18 of Tehran in the years 2015-2016. from 52 contractors, 18 construction contractors, 21 utilities contractors and 13 traffic contractors, respectively, were selected using census method. the research instrument consisted of periodic direct observation and completion of the HSE standard checklist by researchers. Data were analyzed using Kruskal-Wallis nonparametric test by SPSS software.Results: The HSE performance of all contractors (civil, utilities and traffic) was acceptable and the results of Kruskal-Wallis test showed that the HSE performance of contractors at the second visit of 2015 and the first visit of 2016 was significantly different in favor of civil contractors )p <0.01), but there was no significant difference between the first and third visits of 2015 and the second and third visits of 2016 (p> 0.05). visits in six periods indicate HSE Civil Contractors status increased from 100% unfavorable to 88.88% acceptable level and 11.11% good level, and in the case of civil service contractors who initially had 95.23% in an unfavorable situation and 4.76% in a favorable situation achieved 100% acceptable performance, and finally, the traffic contractors, who were 100% unfavorable, were upgraded to 100% acceptable. Conclusion: According to the findings of the study, it seems that the supervision of municipality inspectors on HSE performance of contractors can be effective in improving and strengthening the commitment to HSE requirements, therefore, it is suggested that periodical visits be made to the municipal contractors.

Technological innovation has led to the development of increasingly efficient and complex industrial plants. To manage this complexity, it is necessary to define an integrated vision of the socio-technological system that includes: technological, human and organizational component. Petrochemicals can be considered one of the most complex socio-technical systems that deserve special attention to high risk management, especially during the emergency conditions. Traditional safety management models only consider static systems, while new resilience engineering models evaluate the performance variability developed between different actions. One of the recent development methods is the Functional Resonance Analysis Method (FRAM) that identifies the pairs between the functions. FRAM unfortunately is a qualitative model, this research integrates this model with the Performance Shaping Factors (PSFs) and with the Bayesian approach to identify the performance variability of the system. The analysis aims to develop a system that improves safety analysis. The proposed model is applied in a case study of an emergency in a petrochemical company.

The purpose of this case study was to evaluate the benefits that evidence-based nutritional and training recommendations could have on the time course of reconditioning following hip arthroplasty in a competitive master triathlete. Methods: During 38 weeks (from 6 weeks prior to surgery through to the return to competition), the athlete was provided with detailed training and nutritional recommendations based on the latest research evidence. Dietary intake (via the remote food photographic method), body composition (via DXA), peak oxygen uptake (VO2peak), peak power output (PPO) and cycling efficiency (GE) were assessed 6 weeks pre- and 8, 12, 18, 21 and 25-weeks post-surgery. Training load was quantified (TRIMP score) daily during the retraining. Results: Total body mass increased by 8.2 kg (attributable to a 3.5 and 4.6 kg increase in fat mass and lean mass, respectively) between week -6 and week 8 despite a reduction in carbohydrate (CHO) intake post-surgery (<3.0g/kg/day). This was accompanied with a decrease in VO2peak, PPO, and GE due to a drop in training load. From week 7, the athlete resumed training and was advised to gradually increase CHO intake according to the demands of training. Conclusions: Eventually the athlete was able to return to competition in week 32 with a higher PPO, improved VO2peak and GE. Throughout retraining, energy availability was maintained around 30 kcal/kg LBM/day, protein intake was high while CHO intake was periodised. Such dietary conditions allowed the athlete to maintain and even increase lean mass, which represents a major challenge with ageing.

The objective was to model the teams’ style of play (SoP) in elite football and relate them to the match result. For this, the twenty Spanish first division teams in the 2016-17 season were analysed, using nine interaction performance indicators (IRi). A principal component (PC) analysis was applied. From two PCs four SoPs were established: deep or high-pressure defending, and elaborate or direct attack. The SoPs were distributed according to average performance obtained throughout the championship. The connection between the preferred SoP and the final result was estimated. Teams with elaborate offensive styles and teams defensively minded got better results. In addition, most of the teams showed variability in their SoP. The applications of the study are: 1) the IRi have served to identify SoP and can be used as a reference to optimize team performance; 2) teams should have a varied SoP repertoire, as well as being prepared to deal with different SoPs; 3) particular player profiles should be connected with the desired SoP when creating the squad. 4) clubs should develop a varied range of SoPs at their academies.

We assessed the growth performance, physiological traits, and gene expressions in steers fed with dietary rumen-protected L-tryptophan (RPT) under cold environment. Eight Korean native steers were assigned to two dietary groups, no RPT (Control) and RPT (0.1% RPT supplementation on a dry matter basis), 6 wks. Maximum and minimum temperatures throughout the experiment were 6.7°C and -7.0°C, respectively. Supplementation of 0.1% RPT to a total mixed ration did not increase body weight but had positive effects of elevating average daily gain (ADG) and reducing the feed conversion ratio (FCR) at day 27 and 48. Metabolic parameter showed higher glucose level (at day 27) in the 0.1% RPT group compared to the control group. Real-time PCR analysis showed no significant differences in the expression of muscle (MYF6, MyoD, and Desmin) metabolism genes between the two groups, whereas the expression of fat (PPARγ, C/EBPα, and FABP4) metabolism genes was lower in the 0.1% RPT group than in the control group. Thus, we demonstrate that long-term (6 wks) dietary supplementation of 0.1% RPT was beneficial owing to enhanced growth performance by increasing ADG and glucose level, decreasing FCR, and maintaining homeostasis in immune responses in beef steers during cold environment.

The shear failure of surface methane capture borehole (SMCB) is the main cause of shortening life cycle of SMCB but lack of lithological analysis. In order to improve the stability of SMCB and improve efficient drainage period, it is of great significance to investigate the lithology performances for shear failure of SMCB. Based on the direct shear tests and geological method, the results shows that the shear displacement increases as the grain size decreases. Mechanical jump occurs at the lithological boundaries, which is mainly determined by the composition of rock specimens. The cohesion is the mainly possible reason for the step change of shear strength. Lithology with high quartz and low clay may effectively improve shear strength and failure resistance. Boreholes drilled into the weaker siltstone and mudstone sections may potentially experience preferential damage due to the larger shear displacement and shear strength. Protective measures at these sections may improve the stability of the borehole casing. The probing data where it was found that boreholes closure validated the prediction.