The article reveals distinctive features of the interaction between architectural and structural solutions for the design of tall buildings as well as spotlights the most distinctive cases of expression. In the contemporary world, interaction is turning into the antithesis of the formerly dominant utilitarian attitude and standardization of tall buildings architectural solutions. Meanwhile, the search for rational structural solutions leads to new possibilities of architectural expression. This necessitates the transformation of a structural solution and its adaptation to the need of a modern architect to be exceptional and noticed. Interaction covers the current as well as retrospective and perspective periods. SWOT analysis was used by the authors of the article to assess the interaction between architectural and structural solutions in tall buildings design, select the most important criteria that could be used searching for rational architectural and structural solutions in future by applying multi-criteria decision making methods.

High temperature Ni-superalloys are limited by reliance on critical elements and complex processing steps. High entropy alloys (HEAs) have demonstrated stable single/dual phase microstructures with strong ordering tendencies. A dual phase (FCC+BCC) Al0.5Co0.5CrFeNi1.5Ti0.25 alloy (developed using CALPHAD) was tested for room and high temperature compression behavior. The microstructure mainly comprises of coarse ordered FCC(L12) surrounding decomposed lamellae of ordered FCC(L12) and BCC(L21) phases, which coarsened upon annealing at high temperature (1100 °C) into a bi-continuous structure of disordered FCC+BCC(B2). Additionally, cold rollability of the cast alloy increased from <5% to ~40% after annealing, with a corresponding softening observed in room temperature compression mainly due to disordering of FCC and BCC phases. Peak flow stresses of 793.45MPa, 535.12MPa, and 324.40MPa were achieved at 800oC, 900oC, and 1000oC respectively for the high temperature annealed alloy.

This paper analyses the viability of different solutions to passively augment the axial stiffness of a horizontal axis radial levitation passive magnetic bearing (PMB) with topology previously studied. The zero-field cooling (ZFC) of high-temperature superconductor (HTS) bulks promotes higher magnetic impulsion and levitation forces and lower electromagnetic losses than with the field-cooling (FC), but on the other hand, the guiding stability is much lower than with FC. Because of stability reasons, FC was adopted in most superconducting maglev systems. The trend of this research group has been to develop an HTS ZFC horizontal axis radial levitation PMB presenting notable levitation forces with reduced electromagnetic losses, defined by a topology that creates guiding stability. Previous work has shown that even optimizing the bearing geometry to maximize magnetic guidance forces, could not be enough to guarantee the axial stiffness required for many applications. First, the extent to which guidance forces are augmented by increasing the number of HTS bulks in the stator is evaluated. Then, the axial stiffness augmentation by passively adding two limiting permanent magnet (PM) rings is evaluated. Results show that the axial stiffness is highly augmented by adding limiting PM rings with no significant additional investment. This change enables using the studied ZFC superconducting PMB in high-precision axial stability applications, such as precision gyroscopes, horizontal axis propellers and turbines.

A field study was conducted at the Eastern Mediterranean Agricultural Research Institute, Adana, Turkey, during the 2022/23 cropping seasons to examine the impact of Mepiquat chloride dosage applied at different intervals to optimize growth, yield characteristics enhancement and improve fiber quality attributes of cotton. The study employed a split-split plot design with three replications. The results revealed that differences among treatments were not statistically significant for most parameters investigated. The observed discrepancies indicated that all treatments tested in 2012 delayed cotton development, whereas in 2023, they led to premium fibers. In 2023, the fiber percentage was highest in the control treatment, and in 2022, it was highest at 400 mL·ha-1. Across all years, the Selin variety exhibited the highest fiber percentage when Mepiquat chloride was applied at the bolling stage. The shoot-root ratio was highest at 400 mL·ha-1 during harvest in 2022 and at 0 mL·ha-1 during the reproductive stage in 2023. Overall, the results demonstrated that the application of Mepiquat chloride altered the physiological characteristics of the cotton plants, leading to bottom-up effects on cotton performance. This implies that the effectiveness of Mepiquat chloride in cotton production to alleviate drought stress is influenced by weather-related conditions.

Global warming caused by climate change is a challenge for dairy farming, especially in sub-Saharan countries. Under high temperature and relative humidity dairy cows suffer from heat stress. The objective of this study was to investigate the effects and relationship of heat stress (HS) measured by temperature-humidity index (THI) on physiological parameters and milk yield and composition of lactating Holstein Friesian crosses reared in the humid coastal region of Tanzania. A total of 29 lactating Holstein Friesian x Zebu crossbred dairy cattle with 50% (HF50) and 75% (HF75) Holstein Friesian blood levels in their second and third month of lactation were used. Breed composition of Holstein Friesian was determined based on animal recording system used at the Tanzania Livestock Research Institute (TALIRI), Tanga. Data collected included daily temperature, relative humidity, daily milk yield, and physiological parameters (core-body temperature, rectal temperature, respiration rate, and panting score). The THI was calculated using the equation of National Research Council [39]. The THI values were categorized into three classes i.e. low THI (76-78), moderate THI (79-81) and high THI (82-84). The effects of THI on physiological parameters and milk yield and composition were assessed. Also, the effects of genotype, parity, lactation month, and interaction of these parameters with THI i on milk yield, milk composition, and physiological parameters were investigated. The results indicate that THI and its interaction with genotypes, parity, and lactation month had highly significant effect on all the parameters. THI affected (P ˂ 0.05) average daily milk yield and milk fat %, protein %, lactose %, and solids – not – fat %. When THI increased from moderate to high values, average daily milk yield declined from 3.49 ± 0.04 to 3.43 ± 0.05 liters/day while fat % increased from 2.66 ± 0.05% to 3.04 ± 0.06% and protein decreased from 3.15 ± 0.02% to 3.13 ± 0.03%. No decline was observed on lactose % whilst solids – not – fat % declined from 8.56 ± 0.08% to 8.55 ± 0.10%, when the THI values increased from moderate to high. Also, THI affected (P˂0.05) physiological parameters. Core-body temperature (CBT), rectal temperature (RT), respiration rate (RR) and panting score (PS) increased from 35.60 ± 0.01 to 36.00 ± 0.01oC, 38.03 ± 0.02 to 38.3.30 ± 0.02oC, 62.53 ± 0.29 to 72.35 ± 0.28 breaths/min and 1.35 ± 0.01 to 1.47 ± 0.09, respectively, when THI increased from low to high. THI showed a low positive correlation with average daily milk yield and fat percentage whilst protein, lactose, and solids – not - fat percentages showed negative relationships with THI (P ≤ 0.05). The CBT, RT, RR, and PS showed positive relationships (P ≤ 0.05) with THI. These negative relationships indicate that there is an antagonistic correlation between sensitivity to HS and degree of production. It is concluded that the THI, genotype, parity, and lactation month, and their interactions with THI significantly affected milk yield, milk composition, and physiological parameters of lactating Holstein Friesian dairy crosses at THI thresholds ranging from 77 to 84.

The aim of this prospective, randomized, clinical study was to evaluate the use of the pleth variability index (PVi) to guide the rate of intra-operative fluid therapy as compared with a traditional fixed fluid rate approach in ASA 1-2 dogs undergoing surgery. Twenty-seven dogs meet the inclusion criteria and were randomly assigned to conventional fluid management group (CFM, n = 12) or PVi-guided group (PVi, n = 15). The CFM group received a fixed rate of 5 ml kg-1 h-1 of crystalloid solution, while in the PVi group the rate was continuously adjusted based on PVi: PVi < 14% = 3 ml kg-1 h-1; 14% ≤ PVi ≥ 20% = ml kg-1 h-1; PVi > 20% = 15 ml kg-1 h-1. Hypotension (MAP < 65 mmHg) was managed in CFM with maximum two fluid boluses (5 ml kg-1 in 10 minutes) and in case of no response dobutamine (1-3 mcg kg-1 min-1) was administered. In the PVi group treatment of hypotension was similar except when PVi > 14% when dobutamine was directly initiated. The total fluid amount was significantly lower in PVI group (0.056 ± 0.027 ml kg-1 min-1) vs. CFM group (0.132 ± 0.115 ml kg-1 min-1), and hypotension incidence was lower (p = 0.023) in PVi group (0%) vs. CFM group (41%). Mean arterial pressure (MAP) was significantly higher during surgery in the PVi group. Dobutamine was never administered in both groups. Preliminary data suggest that PVi may be considered a potential target to guide fluid therapy in dogs; larger studies are needed, especially in cases of cardiovascular instability.

: This study focuses on optimizing chlorophyll extraction techniques and strategically placing leaf disks to enhance chlorophyll concentration in sesame (Sesamum indicum L.) leaves. Thirty sesame genotypes, categorized into light green (LG), middle green (MG), and deep green (DG) pigment groups based on leaf coloration, were selected from a larger pool of field-grown accessions. The investigation involved determining optimal SPAD value index measurements, quantifying pigment concentrations, exploring extraction solvents, and selecting suitable leaf disk positions. Significant variations in chlorophyll content were observed across genotypes, greenness categories, and leaf disk positions. The categorization of genotypes into DG, MG, and LG groups revealed a correlation between leaf appearance and chlorophyll content. The study highlighted a consistent relationship between carotenoids and chlorophyll, indicating their role in adaptation to warm environments. Examination of leaf disk positions revealed a significant chlorophyll gradient along the leaf blade, emphasizing the need for standardized protocols. Chlorophyll extraction experiments identified DMSO and 96% ethanol, particularly the later incubated for 10 minutes at 85°C, as effective choices. This recommendation considers factors like cost-effectiveness, time efficiency, safety, and environmental regulations, ensuring consistent and simplified extraction processes. For higher chlorophyll extraction, focusing on leaf tips and the 75% position along the sesame leaf blade is suggested, consistently yielding higher chlorophyll content. Our findings therefore, underscores insightful knowledge on chlorophyll gradients and encouraging for standardized protocols, that enabling researchers to refine experimental designs for precise and comparable chlorophyll measurements. Recommended solvent choices ensure reliable outcomes in plant physiology, ecology, and environmental studies.

Effective oral care is important to maintain a high quality of life. Therefore, plaque control can prevent the development and recurrence of periodontitis. Brushing with a toothbrush and toothpaste is a common way to remove plaque; however, excessive brushing or brushing with abrasive toothpaste can cause wear and tear on the dental crown. Hence, we aimed to quantitatively compare the plaque-removal efficiency and tooth wear of toothbrushes using bioelectric effect (BE) with those of mechanical electric toothbrushes. To generate the BE signal, an electronic circuit was developed and embedded in a toothbrush. Further, typodonts were coated with cultured artificial plaques and placed in a brushing simulator. A toothpaste slurry was applied, and the typodonts were eluted with tap water after brushing. The plaques of the typodonts were captured, and the images were quantified. For the tooth wear experiment, polymethyl methacrylate disk resin blocks were brushed twice a day, and the thickness of the samples was measured. Subsequently, statistical differences between the experimental toothbrushes and typical toothbrushes were analyzed. The BE toothbrush had a higher plaque-removal efficiency and could minimize tooth wear. This study suggests that the application of BE may be a new solution for oral care.

Atmospheric turbulence characteristics are essential in determining the quality of astronomical images and implementing adaptive optics systems. In this study, the vertical distributions of optical turbulence at the Peak Terskol observatory (43.27472 ° N 42.50083 ° E, 3127 m a.s.l.) using the Era-5 re-analysis and scintillation measurements are investigated. For the closest reanalysis grid node to the observatory, vertical profiles of the structural constant of the air refractive index turbulent fluctuations Cn2 were obtained. The calculated Cn2(z) vertical profiles are compared with the vertical distribution of turbulence intensity obtained from tomographic measurements with Shack-Hartmann sensor. The atmospheric coherence length at the location of Terskol Peak was estimated. Using combination of atmospheric models and scheme paramaterization of turbulence, Cn2(z) profiles at Mt. Kurapdag were obtained. The values of atmospheric coherence length at the Peak Terskol are compared with estimated values of this length at the ten astronomical sites including Ali, Lenghu and Daocheng.

This analytical cross-sectional study was designed to evaluate the association between glycemic control and peripheral arterial disease in patients with diabetic foot with more than ten years of evolution of diabetes mellitus who attended the diabetic foot outpatient clinic of the Guillermo Almenara National Hospital between June 2015 and February 2017. Glycosylated hemoglobin (HbA1C) and ankle-brachial index (ABI) were used to diagnose glycemic control and peripheral arterial disease, respectively. A generalized Poisson log-linear regression model was used to calculate the crude (cPR) and adjusted (aPR) prevalence ratios, with 95% confidence intervals, and a significance level of p < 0.05. 226 patients were included in the study, finding 23% (n=52) with good glycemic control, and 44.7% (n=101) with peripheral arterial disease. The adjusted model found statistically significant associations for glycemic control, age, and sedentary lifestyle with peripheral arterial disease. Compared with patients with good glycemic control, those with poor glycemic control had a 34% higher probability of presenting peripheral arterial disease (aPR: 1.34, 95%CI: 1.01-1.79, p=0.045). The prevalence of good glycemic control in the population with diabetic foot is low. Poor glycemic control was found to be independently associated with the presence of peripheral arterial disease.

We have studied the stochastic processes A and B concerning fade durations due to rain, by simulating attenuation time series A(t) (dB) in the zenith paths of GeoSurf satellite constellations, at sites located in different climatic regions, with the Synthetic Storm Technique. Process B gives the statistics of outages (occurrences), process A gives the statistics of outage duration (fraction of time), for the same rain attenuation threshold A(t)&gt;S. The two processes are not independent, therefore, we have studied the relationship between their probabilities and defined a uniformity index 0&lt;U(S)≤1. U(S) is useful for comparing real cases – fade durations fragmented in many different intervals, with changing S and site – and the limiting case of all fades lasting the same time. As S increases, U(S) increases, approaching 1 at very large thresholds. These results should guide the designers of future GeoSurf satellite constellations to consider the impact of A(t) on the diverse communications services. Process B (occurrences) impacts on non–real time services, such as data delivery, more disturbed by the number of outages rather than by their duration. Process A (fraction of time) impacts on real–time services such as television, video conference etc., more disturbed by the duration of the outage.

To accurately and non-destructively monitor the growth of spring wheat in the Hetao Irrigation Area, UAV remote sensing was employed during various fertility stages. Digital image indices from diverse fertilization treatments were calculated and compared with physiological indices to identify the most sensitive digital image indices corresponding to these indices. The study underscored the critical importance of the flowering stage in the growth of spring wheat, thus highlighting the necessity of focusing on this stage. This finding reiterated that the flowering stage was pivotal for spring wheat development in the Hetao Irrigation Area. Several digital image indices, such as GLA, R, G, INT, g, GRVI, MGRVI, RGBVI, EXG, and GRRI, exhibited a high frequency of significant correlations with physiological indices during the four primary reproductive stages of wheat. Consequently, these sensitive digital image indices during the flowering stage can more effectively characterize the physiological indices of spring wheat.

Healthcare visits were reduced during COVID-19 pandemic causing the disturbance of the sustainability in NAFLD monitoring. Telemedicine acts to maintain connectivity between patients and healthcare professionals. This review aimed to assess telemedicine helps to monitoring in NAFLD. The database was searched from The PubMedCentral and ScienceDirect from 2020 to 2023. We assessed the Cochrane Risk of Bias (RoB) for randomized controlled trial (RCT) and the Newcastle-Ottawa scale for non-RCTs systematic reviews. Meta-analyses with random-effects model to determine the pooled mean difference (MD) and p-value. There were three RCT and two non-RCT were included (n=239) with 56.9% males and the mean age was 51.3 years. Median intervention lasted 5.5 months. The parameter were body weight (BW), body mass index (BMI), waist circumference, liver function (AST/ALT), lipid profile and HbA1c. Metaanalysis showed telemedicine had a significant effect on improving outcomes for BW (MD -2.81: 95% CI, -4.11, -1.51, P 0.0001) and BMI (MD -1.01: 95% CI, -1.47, -0.55, P 0.0001) compared to standard care, while the AST/ALT were not significantly reduced. Other laboratory parameter were decreased from systematic reviews. Telemedicine through mobile-based applications could be an option for monitoring body weight and BMI in NAFLD patients facing the pandemic.

Nutrition and calorie intake are associated with subtle changes of thyroid function tests in subjects with intact Hypothalamic-Pituitary-Thyroid axis. Iodine deficiency and extreme fluctuations in calorie intake, such as those occurring during periods of starvation or overfeeding could lead to alterations of thyroid hormones. The dietary macronutrient composition could also influence the thyroid function. Recently, Low-Glycemic Load (LGL) diets are very popular and effective in the treatment and/or prevention of several medical conditions, including diabetes, obesity, cardiovascular disease, and epilepsy. In this review, we report the available data from the literature regarding the association between LGL diets and thyroid function or dysfunction. Unfortunately, there are only a few studies in this field, with inconsistent findings.

The European Fish Index EFI+ is the only fish-based multimetric index for the assessment of the ecological status of running waters validated and thus applicable across the European Union. Metrics of the index rely on several attributes of the species present in the fish assemblage, irrespective of their native/alien status. The abundance of alien fish, together with other anthropogenic impacts, is one of the most important threats to the conservation of native fish and ecosystem health and is also an indicator of degraded stream conditions. Therefore, to improve the performance and utility of the EFI+ in regions with high incidence of alien species, the EFI+ was adapted to include the alien fish pressure by averaging the two original metrics with a new metric that reflects the number of alien species as well as the proportional abundance of alien individuals. The application of the adapted index (A-EFI+) is illustrated with data from several Iberian Mediterranean basins and showed similar or stronger correlations than the original EFI+ with anthropogenic pressure (land-use variables) and with other regional fish indices. EFI+ has been invaluable to intercalibrate fish indices across Europe and A-EFI+ is similar but explicitly includes the alien pressure, thus helping to provide a more comprehensive assessment of ecosystem health and to communicate it to society.

Large-scale farms are pivotal sites for the development of the agricultural industry, and the quality of the ecological environment is a significant factor affecting the growth of cereal crops. Consequently, assessing the ecological quality of large-scale farms is of great importance. This paper leverages the advantages of remote sensing imagery for long-term, quantitative, and dynamic monitoring of ecological quality over extensive areas. It develops an ecological assessment procedure suitable for agricultural regions based on an Improved Remote Sensing Ecological Index (IRSEI), which considers the coupling of ecosystem component elements. This procedure introduces a Pan-Salinity Index (PSI) tailored to the characteristics of soil salinization in farming areas and incorporates an ecological greenness index based on the Normalized Difference Vegetation Index (NDVI), an ecological humidity index derived from the K-T transform (WET), an ecological dryness index synthesized from the bare soil index and the built-up index (NDBSI), and an ecological heat index represented by the Land Surface Temperature (LST) calculated from atmospheric parameter models. These five indices are integrated into the ecological assessment system. The experimental results visually demonstrate the development and changes of ecological impact factors in the farm research area over the past decade, as well as the spatiotemporal variations in the quality of the farm's ecological environment. The findings indicate that between 2010 and 2019, the overall trend of IRSEI first declined, then rose, and subsequently experienced a slight decrease. Through differential analysis, regions and areas with declining ecological quality were identified, providing a data reference for the formulation and implementation of future ecological protection and management measures for the farm. The proposed IRSEI method offers a rapid and effective new monitoring approach for agricultural planting areas with a tendency towards soil salinization.

This study employs traditional OLS (ordinary least squares) regression analysis to investigate the influence of various external factors on Bitcoin price fluctuations from January 2014 to March 2023 using a multidimensional approach. We use factors from the traditional financial market, such as economic policy uncertainty (EPU), oil prices, the NASDAQ index, and gold prices, to identify factors contributing to Bitcoin volatility. Considering the unique situation in the Bitcoin market, that is, 24-hour trading and the short duration of its existence, we incorporate the broadest possible data range to achieve alignment between Bitcoin data and other datasets. The findings of the statistical analysis indicate that EPU and the NASDAQ index promote positive fluctuations in Bitcoin volatility, whereas gold prices act as a dampener. However, we find no empirical support for the influence of energy prices on Bitcoin volatility. These results suggest that Bitcoin should not be underestimated; all stakeholders should treat the issue of Bitcoin volatility seriously, including governments, who should actively regulate the Bitcoin market, and investors, who should recognize the dangers of this volatility, making rational decisions based on individual circumstances and employing flexible trading strategies.

Irrigation with water containing a variety of microcystins (MCs) may pose potential threat to normal growth of agricultural plants. The mechanism of microcystin-LR (MC-LR) induced phytotoxicity in rice (Oryza sativa L.) at environmental concentrations is still unknown. Rice seedlings were exposed to MC-LR at concentrations of 0.10, 1.0, 10.0 and 50.0 μg·L−1 in hydroponic nutrient solutions for 7, 15, 20, and 34 days in the current study. The absorption and accumulation in leaf and root tissues, as well as a series of key physio-biochemical process changes in leaves of rice at different exposure time points were measured. Results showed that MC-LR could be detected in rice leaves and roots in all exposure groups, however, a significant accumulation trend of MC-LR in plants (BCF > 1) was only found in the lowest group (0.10 μg·L−1). The time-course study revealed a biphasic response of O2•- levels in rice leaves to the exposure of MC-LR, which was more pronounced in higher concentration groups, which could be attributed to the combined effects of antioxidant and detoxification mechanisms in rice. Exposure to 1.0 - 50.0 μg·L−1 MC-LR resulted in significant depletion of GSH and MDA contents in rice leaves at later exposure times. The changes of nitric oxide synthase (NOS) in rice leaves under MC-LR exposure were firstly investigated in the current study. Low MC-LR concentrations promoted NOS activity, whereas high concentrations inhibited NOS activity during the later exposure times, implying that NO may play a role in MC-LR toxicity in rice. Reduced sucrose synthase (SS) activities in rice exposed to MC-LR can reduce the plant's ability to accumulate carbon and thus may be directly related to the reduction in vegetative growth. These findings suggest that even at low concentrations of MC-LR, terrestrial plants' normal physiological status is disrupted, which, when combined with previous findings, helps reveal the mechanism of MC-LR-induced phytotoxicity.

Plasmonic nanocomposites have the ability to enhance light-matter interaction due to the 1 plasmonic effects leading to promising potential applications. In this paper, we theoretically study the 2 group index of the silver nanoparticle-gold nanoparticle-quantum dot plasmonic hybrid system in 3 the optical region of the electromagnetic spectrum using the density matrix approach. The quantum 4 dot is considered to be a three-level atomic system of a lambda configuration, interacting with strong 5 control and weak probe fields. We find that the plasmonic hybrid system exhibits at near resonance a 6 strong switching between slow and fast light, which can be controlled by the inclination angle of the 7 gold nanoparticle and the size of the metals nanoparticles, in addition to the strength and detuning 8 of the control field. Thus, the silver nanoparticle-gold nanoparticle-quantum dot could potentially be 9 used in optoelectronic devices.10

The UV/Vis absorption energies (νmax) of different solvatochromic probes measured in co-solvent/water mixtures are analysed as a function of the average molar concentration (Nav) of the solvent composition. Nav is discussed in terms of the underlying average molar mass (mol average or mass average) of the mixture. ET(30) of Reichardt`s dye B30 is the focus of the analysis. Methanol, ethanol, 1,2-ethanediol, 2-propanol, 2-methyl-2-propanol, 2-butoxyethanol, formamide, N-methylformamide (NMF), dimethylformamide (DMF), N-formylmorpholine (NFM), 1,4-dioxane and DMSO were used as co-solvents. Significant linear dependencies of ET(30) as a function of Nav can be demonstrated for formamide/water, 1,2-ethanediol/water, NMF/water and DMSO/water mixtures over the whole composition range. These mixtures belong to the group of solvents that do not enhance the water structure according to the Marcus classification. The specifics of the 1,4-dioxane/water mixtures are discussed. For alcohol/water mixtures with enhanced water structure, the influence of the solvent microstructure on ET(30) is particularly evident.

Background The Delta Neutrophil Index (DNI), a prodiagnostic marker for sepsis, utilizes leukocyte count. Platelet activation, similar to leukocytes, plays a crucial role in host defence against pathogens and may serve as a predictor of sepsis outcome. However, the combined evaluation of Mean Platelet Component (MPC) and DNI in assessing sepsis has been rarely used. Methods To assess the prodiagnostic validity of simultaneous utilization of DNI and MPC in cases of human febrile sepsis, we conducted measurements of cellular indices, including DNI and MPC, as well as molecular biomarkers such as procalcitonin (PCT) and C-reactive protein (CRP). This study was carried out on patients admitted to the emergency department with suspected sepsis. Results Using a cutoff value of 2.65%, the sensitivity, specificity, positive predictive value (PPV), and negative predictive value (NPV) of DNI in sepsis were found to be 69%, 73.9%, 77.9%, and 64.1%, respectively. Furthermore, significant differences in DNI and MPC levels were observed between the sepsis and non-sepsis groups (6.7±7.8% versus 2.1±2.2%, P=0.000 and 26.0±1.9 g/dl versus 26.8±1.4 g/dl, P=0.002), respectively. Notably, there was a negative correlation between DNI and MPC, with the strength of the correlation varying based on the cause of sepsis. By setting the cutoff value for DNI at 6.2%, the sensitivity, specificity, and NPV improved to 100%, 80.3%, and 100%, respectively, although the PPV remained at 10.6%. Importantly, the DNI≥6.2 group exhibited a higher incidence of death (10.9%, 5/46) and multiorgan failure (19.6%, 9/46) compared to the DNI<6.2 group (0.0%, 0/46 and 0.0%, 0/167, respectively) (P=0.000 and P=0.000, respectively). Conclusions In our study, DNI demonstrates superior effectiveness compared to other molecular biomarkers such as CRP and procalcitonin in distinguishing febrile septic patients from febrile nonseptic patients and predicting prognosis. Additionally, there exists a negative correlation between MPC and DNI, making MPC a valuable marker for differentiating the etiology of sepsis. These findings hold significant clinical implications as DNI/MPC is a cost-effective and readily applicable approach in various impending sepsis scenarios. Notably, this study represents the first examination of the prodiagnostic validity of simultaneously employing DNI and MPC in human cases of febrile sepsis.

Cognitive reserve is the adaptability of cognitive processes in the face of brain aging and pathology. This study aimed to validate the Arabic version of the Cognitive Reserve Index Questionnaire (CRIq) in a healthy Lebanese sample. CRIq assesses cognitive reserve through three domains: education, working activity, and leisure time. Statistical measures, including descriptive and regression analysis along with structural equation modeling, were utilized to investigate the convergent and discriminant validity of CRIq, incorporating fluid intelligence (Gf) and measures of cognitive function, long-term memory encoding and retrieval (Glr), and processing speed (Gs). Results from 174 participants revealed that the activities assessed by CRIq-Arabic were comparable to the original CRIq study, with slight cultural differences. The internal consistency of CRIq-Arabic was good (Cronbach's α = 0.88), indicating reliability. Convergent validity was confirmed, with moderate to high loadings on the cognitive reserve latent construct. Discriminant validity was supported as correlations between cognitive reserve variables and non-target constructs (Gf, Glr, Gs) were less than 1. The findings provide an initial psychometric validation of the CRIq-Arabic. Further research in clinical samples is needed to enhance its utility in neuropsychological practice.

This paper uses probability method to evaluate the fire safety performance of prestressed steel-concrete beam bridges based on simulation experimental research. Firstly, fire simulation experimental sample analysis was conducted on actual small box girder bridges to obtain the structural response of prestressed steel-concrete structures under fire, which is in line with engineering practice. Next, construct a reliability analysis model for the fire resistance performance of prestressed steel-concrete beam bridges; Combining reliability theory with finite element method, establish a reliability analysis method for the fire resistance performance of prestressed steel-concrete beam bridges. Subsequently, a safety factor evaluation model for the fire resistance performance of prestressed steel-concrete beam bridges was proposed, and a safety factor evaluation method for the fire resistance performance of prestressed steel-concrete beam bridges based on reliability back analysis was established. Finally, based on the analysis of the structural response after a fire in a specific case of a simply supported to continuous prestressed steel-concrete continuous beam bridge project, a structural resistance sample of the prestressed steel-concrete beam bridge is generated through uniform design method, and statistical analysis is conducted. Subsequently, probability methods are used to evaluate the safety of the prestressed steel-concrete beam bridge after a fire. Through analysis, it can be concluded that the time of fire has a significant impact on the structural performance of prestressed steel-concrete beam bridges, and the randomness of parameters has a significant impact on the safety reserve of prestressed steel-concrete beam bridges after fire. It is necessary to pay attention to it in specific engineering practice and strengthen the monitoring and statistics of structural random characteristics.

Soil resilience has become a central theme in research aimed at understanding the impacts of human activities on the environment and mitigating the negative effects of soil disturbance. To evaluate how soil management practices affect soil resilience, 26 small farms were studied in a mountainous district of Lebanon. Farms were categorized into conventional (C), neutral (N), and regenerative (R), based on the practices adopted including tillage, amendments, rotation, cover crops, residues management, and pest control. Common practices included intercropping (85%), residue retention (73%), cover crops (61%), and organic amendments (46%). Qualitative assessment of soil health used indicators from Latin American Society for Agroecology (SOCLA) as well as from ‘Tool for Agroecological Performance Evaluation’ of the FAO. The indicators aligned with the classification of farms into their respective C/N/R groups. The sustainability scores were 4.28 (Low) for conventional, 6.34 (Moderate) for neutral, and 7.88 (Good) for regenerative farms. Quantitative analysis determined for 15 selected farms showed significant differences in soil organic matter (1.86% C, 2.75% N, 3.32% R), soil respiration (156C, 296N, 380R mg C-CO₂. week⁻¹), and earthworm abundance/liter (2.92C, 4.24N, 5.72R). The Soil Quality Index (SQI) provided an accurate representation of the current soil health condition, with increment from 0.05, 0.27 (low), to 0.49 (good) in conventional, neutral, and regenerative farms, respectively. The research highlights that soil resilience is influenced by a combination of intricate factors, encompassing biotic interactions, as well as physical, chemical, and biological processes. Particularly in regions like the Mediterranean basin, adopting sustainable soil management practices contributes to enduring productivity while preserving the functional integrity and resilience characteristics of the soil.

In the realm of power delivery to end-users, transformers are indispensable, with their malfunctions leading to substantial economic, safety, and environmental repercussions. The need for persistent surveillance is accentuated for in-situ oil-filled transformers, given the potential degradation of oil and the emergence of related ageing by-products. As the focus tilts towards online detection methodologies for transformer oil ageing, bypassing challenges associated with traditional offline methods such as sample contamination and misinterpretation, fiber optic sensors are gaining trac-tion due to their compact nature, cost-effectiveness, and resilience to electromagnetic disturbances typical in high-voltage environments. This work delves into the sensitivity analysis of intensi-ty-modulated plastic optical fiber sensors. The investigation encompasses key determinants such as the influence of optical source wavelengths, noise response dynamics, ramifications of varying sensing lengths, and repeatability assessments. Findings underscore that elongating the sensing length detrimentally affects both the linearity response and repeatability, largely attributed to the diminished resistance to external noise. Additionally, the choice of the optical source wavelength proved to be a critical variable in assessing sensor sensitivity.

In this paper for every number field K generated by a root α of a trinomial x⁷ + ax + b ∈ Z[x] and for every prime integer p, we calculate ν_p(i(K)), the highest power of p dividing the index i(K) of the field K. In particular, we calculate the index i(K). As application, when the index of K is not trivial, then K is not monogenic.

Objective: Obstructive sleep apnea syndrome (OSAS) is a common sleep disorder that is caused by the reduction or cessation of airflow in the upper airway. Irisin, retinol-binding protein-4 (RBP-4), and adiponectin are the three significant factors in the metabolic process of the human body. The objective of this study was to investigate whether plasma irisin, RBP-4, and adiponectin levels are associated with the severity of OSAS. Methods: According to inclusion and exclusion criteria, 125 patients with OSAS and 46 healthy, gender matched controls were included to the study. The patients were classified according to the apnea hypopnea index (AHI) as 14 mild cases (5<AHI<15), 23 moderate OSAS cases (15<AHI<30) and 88 severe OSAS cases (AHI>30). The plasma irisin, RBP-4 and adiponectin levels were measured and compared between groups. Results: RBP-4 levels were higher in severe OSAS compared to moderate (p<0.05) and mild (p<0.001) OSAS groups, irisin levels were significantly lower compared to moderate (p<0.05) and mild (p<0.001) OSAS groups. There was a negative correlation between irisin and RBP-4 (r=-0.379; p<0.001) and AHI (r=-0.834; p<0.001) and a positive correlation with minimum oxygen saturation (MOS) (r=0.341; p<0.001) in the patient group. In the patient group, there was a negative correlation between adiponectin and BMI (r=-0.682; p<0.001), RBP-4 (r=-0.292; p<0.01) and AHI (r=-0.179; p<0.05) and a positive correlation with MOS (r=0.397; p<0.001). In the patient group, there was a positive correlation between RBP-4 and BMI (r=0.406; p<0.001) and AHI (r=0.473; p<0.001) and a negative correlation with MOS (r=-0.805; p<0.001). As a predictor of OSAS, adiponectin showed the highest specificity (84.8%) and RBP-4 the highest sensitivity (92.0%). Conclusion: The results of the present study demonstrated that the severity of OSAS causes more metabolic problems, including decreased plasma irisin and adiponectin levels and an increased plasma RBP-4 level. As a result, patients with an AHI score greater than thirty should be closely monitored for metabolic and cardiovascular abnormalities.

Background: The oral health-related quality of life (OHRQoL) assessment evaluated the impact of individual’s oral health on the patient's physical and psychosocial status. We evaluated the association between subjective OHRQoL, measured with the Oral Health Impact Profile-14 (OHIP-14) questionnaire, and unfavorable body mass index (BMI) (i.e., too high or too low) in a large population-based study on older adults from Southern Italy. Moreover, we assessed which of the seven OHIP-14 domains was most strongly associated with an unfavorable BMI. Methods: We used data on a subpopulation of the Salus in Apulia Study, including 216 older adults. BMI &lt;18.4 kg/m2 and &gt;30 kg/m2 were classified as unfavorable, values between 18.5 and 30 kg/m2 were classified as ideal. Results: Higher OHIP-14 total score increased the risk to have an unfavorable BMI [odds ratio (OR):1.08, 95% confidence interval (CI):1.01-1.15]. In the model adjusted for age, sex, education, hypertension, carbohydrate consumption, and alcohol consumption, this finding was confirmed with higher OHIP-14 total score increasing the risk to have an unfavorable BMI (OR:1.10, 95% CI:1.01-1.22), and higher age linked to a decreased risk to have an unfavorable BMI (OR:0.89, 95% CI:0.82-0.97). In a random forest regression model, the most important predictive domains/sub-scales of OHIP-14 in mean decrease Gini for unfavorable BMI were, in order of decreasing importance, physical pain, functional limitation, psychological discomfort, physical disability, social disability, psychological disability, and handicap. Conclusions: In older age, negative OHRQoL, particularly linked to the physical pain domain, increased the risk of underweight or overweight and obesity.

Historically, Physalis physalis massive stranding events have been infrequent and poorly documented. However, their occurrence can have significant impacts on human health and the stability of coastal ecosystems. In this study we analyze the largest P. physalis stranding event historically recorded affected Cuba’s northwestern coast in December 2022. We counted all colonies during the massive event along ~ 3 km coast, within a 5 m stripe. Density, dimorphic form (left/right-handed), and colony size were quantified using 0.25 m2 quadrat placed every 50 m, 10 m from shoreline. Eighty-five people were stung, with 38 having strong allergic reactions, resulting in a health risk. Over ten thousand colonies were recorded, with the highest mean colony density (29.3 per m2) ever reported. The massive stranding coincided with the lowest Arctic Oscillation index (-2.59) in the past 11 years during December, likely linked to climate change. This led to the emergence of northeasterly winds reaching speeds of up to 24 km/h. Wind direction and speed, coupled with the dominance of left-handed colonies (71.4%), suggest the Sargasso Sea as the possible source of the bloom. The high prevalence of juvenile P. physalis colonies (68 %) likely aligns with the autumn breeding season in the northern hemisphere. The potential causes of P. physalis blooms are still poorly understood. Systematic monitoring of the distribution and abundance of this species should be a research priority considering the potential risk to human health and that the blooms could become more frequent and affect other areas in the Atlantic, given climate change and increasing eutrophication of the oceans.

It is found in this paper that ILR-RPCA-back CLR has two problems when dealing with the closure effect of geochemical data. (1) After ilr transformation, RPCA is used for processing. It can be seen from the double-plot diagram that the first principal component and the second principal component transform with the element sequence transformation, and the unique principal component cannot be calculated; (2) the score and the load are transformed into the CLR space through the U matrix. According to the formula CLR=ALR·U, the score result can correspond to the original order of elements. However, the load result obtained by the use of this formula cannot correspond to the original order of elements, and the result can only be obtained through the formula” CLR=UT·ALR”. In order to obtain the best element assemblage of porphyry copper deposit, this paper adopted the mineral assemblage of discovered deposits in Gangdese metallogenic belt for statistical analysis, and obtained that the element assemblage of porphyry copper deposit was Cu, Mo, Au, Ag, W, Bi. Then, by analyzing the singularities of the composite elements, the spatial overlay of the combined element is carried out, and C-A fractal filtering is applied to identify the anomaly and background. In order to facilitate comparison, the different minerals and ore deposit types have been analyzed, the results show that (1) in view of the porphyry copper deposits, recognition effect of combination elements are better than which single element, (2) skarn type copper deposit that it has nothing to do with the porphyry had a high degree of difference, but skarn type copper deposit related to the porphyry had a low degree of difference, (3) This method has a certain advantage over the single element method in porphyry gold deposits, and it can reduce the level of anomalies. Such an advantage is that in the aspect of anomaly evaluation of porphyry copper deposits, the level is reduced at the initial stage of evaluation to reduce the investment in such anomalies, (4) This method has limited ability to distinguish porphyry copper deposit from porphyry molybdenum deposit.

Many applications in agriculture as well as other related fields including natural resources, environment, health, and sustainability, depend on recent and reliable cropland maps. Cropland extent and intensity plays a critical input variable for the study of crop production and food security around the world. However, generating such variables manually is difficult, expensive, and time consuming. In this work, we discuss a cost effective, fast, and simple machine learning based approach to provide reliable cropland mapping model using satellite imagery. The study includes four test regions namely; Iran, Mozambique, Sri-Lanka, and Sudan where Sentinel-2 satellite imagery were obtained with assigned NDVI scores. The solution presented in this paper discusses a complete pipeline including data collection, time series reconstruction , and cropland extent and crop intensity mapping using machine learning models. The approach proposed managed to achieve high accuracy results ranging between 0.92 to 0.98 across the four test regions at hand.

Soil quality is related to food security and human survival and development. In recent years, due to the acceleration of urbanization and the increase of abandoned land, land degradation occurs, poor topsoil quality. In this study, the minimum data set (MDS) was constructed through principal component analysis (PCA) to determine the indicator data set for evaluating topsoil quality in Tieling County, China. In addition, the soil quality index (SQI) was calculated to analyze the spatial distribution characteristics and influencing reasons of topsoil quality in Tieling County. The re-sults showed that MDS included total potassium (TK), Clay, zinc (Zn), soil organic matter (SOM), soil water content (SWC), cation exchange capacity (CEC), pH, and copper (Cu). The MDS indicators can well replace all indicators to evaluate the topsoil quality in the study area. The overall soil quality of Tieling County showed a trend of low in the east and high in the west, and gradually increased from the hilly area to the plain area. The evaluation results are consistent with field research, which can provide reference for other topsoil quality evaluation, and it also provide a basis for the formulation of soil quality improvement measures.

Urban vitality, understood as a key factor for the achievement of cities’ sustainability, shows a strong relationship with urban morphology. The city theorist Jane Jacobs suggested morphologi-cal aspects to promote vital cities already in the 1960s, which remain valid in the present. How-ever, few studies in the Andean region quantitatively exemplify this. This paper aims to test the measurement of urban vitality in a neighborhood of Quito, Ecuador, called La Mariscal, inte-grating Jacobs’ approach. In particular, three urban vitality indexes are evaluated with the appli-cation of GIS software using cadastral data obtained from the municipality and field data col-lection. Results show that the context-based previous knowledge and the scale of analysis are es-sential factors in the configuration of dimensions, indicators, and spatial representation of any urban vitality index. In the study area land use mixture, contact opportunity, and accessibility dimensions are fundamental. Regarding indicators, the incorporation of the informal small-scale commerce, the quality of sidewalks, the street slope, and the good-conditioned street furniture is recommended. Finally, a hybrid representation (raster and vectorial) is suggested to precisely measure urban vitality at a block scale. Altogether, by providing a comparative approach, we in-tend to bring a useful framework for researchers and planners to study urban vitality in Andean cities.

Initially, renal resistive index (RRI) was investigated to improve diagnosis in kidney diseases, but failed to meet this goal. Recently many papers highlighted the prognostic significance of RRI in chronic kidney disease, in the estimation of revascularization success of renal artery stenoses or the evolution of the graft and recipients in renal transplantation. Moreover, RRI gained importance in prediction of acute kidney injury in critically ill patients. Along with RRI study in renal pathology have been revealed correlations of this index with parameters of systemic circulation. The theoretical and experimental premises of this connection were reconsidered, and studies for analyzing the link between RRI and arterial stiffness, central and peripheral pressure or left ventricular flow were conducted with this purpose. A high amount of data is currently indicating that RRI is influenced more by pulse pressure and vascular compliance than by renal vascular resistance – assuming that RRI reflects the complex interplay between systemic circulation and renal microcirculation and should be considered as a marker of systemic cardiovascular risk beyond its prognostic relevance for kidney disease. In this review we will go through clinical research that revealed the implications of RRI in renal and cardiovascular disease.

This study assesses the perception and vulnerability of the farming communities to climate change in the southwestern parts of Ethiopia. Data were collected from 442 households in four districts: Jimma Arjo, Bako Tibe, Chewaka, and Sekoru. The vulnerability of the farming communities was assessed using the households’ livelihood vulnerability index. A total of 40 indicators were applied to calculate household livelihood vulnera-bility to climate change, which were categorized into five major capitals: natural, social, financial, physical, and human. The household percep-tions of climate change results showed that there existed a statistically significant relationship between climate change perceptions and changes in rainfall pattern (75.6%, p<0.001), temperature pattern (69.7%, p<0.001), drought (41.6%, p=0.016), flood (44.1%, p=0.000), and occurrence of early (53.2%, p<0.001) and late rain (55.9%, p<0.001). The results showed that households in Sekoru district were the most vulnerable (0.61), while Jimma Arjo district were less vulnerable (0.47) to the effect of climate change. The vulnerability of the households in the study areas is mainly related to the occurrence of drought, lack of much-needed infrastructure facilities and weak institutional support. Links with the financial organization are also lacking among the household. The findings of this study will support policymakers to design climate change adap-tation strategies to combat climate change impacts. To support disaster risk management on the one hand and increase the resilience of vulnera-ble societies to climate change on the other hand, we recommend a detailed assessment in the remaining districts of the region.

Irrigation and fertilizer are two essential factors affecting rice root traits and yield. In this respect, a pot experiment was performed at the boro (dry season irrigated) season of 2021-22 in the Department of Agronomy of Bangladesh Agricultural University, Mymensingh, Bangladesh. The variety Binadhan-10 was planted at two irrigation conditions i.e. saturation (S) and continuous flooding (CF); two potassium (K) dose e.g. 65 kg ha-1 (K65) and 98 kg ha-1 (K98) and two nitrogen (N) dose i.e. 140 kg ha-1 (N140) and 210 kg ha-1 (N210). The experiment was laid in split plot design and replicated thrice. The findings confirmed the effectiveness of irrigation, K and N on root number (RN), root length (RL), root volume (RV), leaf area index (LAI), total dry matter (TDM), yield attributes and yield. Considering interaction among irrigation, K and N, S condition with K65 and N140 showed best performance. At 80 DAT, the highest RN (373.00), RL (1700.00 cm), RV (8.90 cm3 hill-1), LAI (4.94) and TDM (25.83 g plant-1) was obtained from this combination. Grain yield (GY) and root traits except root porosity, showed a significant positive association. Grain yield (GY) was highest (27.12 g pot-1) in S condition with K65 and N140.

Exploring the relationship between cereal yield and remotely sensed normalized difference vegetation index (NDVI) is of great importance to decision-makers and agricultural stakeholders. In this study, an approach based on the Pearson correlation coefficient and linear regression method is carried out to reveal the relationship between cereal yield and Moderate Resolution Imaging Spectroradiometer (MODIS) NDVI data in the Fez-Meknes region of Morocco. The results obtained show strong correlations reaching 0.70 to 0.89 between NDVI and grain yield. The linear regression model explains 58 to 79% of the variability in yield in regional provinces marked by the importance of cereal cultivation, and 51 to 53% in the mountainous provinces with less agricultural land devoted to major cereals. The regression slopes indicate that a 0.1 increase in NDVI results in an expected increase in grain yield of 4.9 to 8.7 quintals (q) per ha, with an average of 6.8 q/ha throughout the Fez-Meknes region. RMSE ranges from 2.12 to 4.96 q/ha. These results are promising in terms of early yield forecasting based on MODIS NDVI data.

The agro-biodiversity present in agro-ecosystems is fundamental in guaranteeing sustainability and resilience. However, there are very few proposals for evaluating it and, even less, ones that include indicators to analyze the influence of the structural and spatial configuration of a landscape in order to favor agro-biodiversity connectivity to productive systems, management and conservation practices, and the producer (farmer)’s perceptions, awareness and ability to favor it on his farm. The Main Agro-ecological Structure MAS is redefined as an environmental agro-biodiversity index. New indicators are established for a total of 10 criteria and 29 indicators of systems that describe the agro-biodiversity of agro-ecosystems. Methodologies for its evaluation are also described, and the possibility of adapting certain indicators according to the ecological and cultural contexts where the farms are located is discussed.

Impervious surface area (ISA) is a crucial indicator for quantitative urban studies. It is also important for land use land cover classification, groundwater recharge, sustainable development, urban heat island effects, and more. Spectral ISA mapping suffers from mixed pixel problems, especially with bare soil. This study aims to develop an ISA index for spatiotemporal urban mapping from common multispectral bands by reducing soil signature better than in previous studies. This study proposed a global impervious surface area index (GISAI) enhancing ISA mapping accuracy using a temporal parameter of the remote sensing (RS) dataset. Bare soil spectral reflectance shows more fluctuation than urban ISA. Therefore, the study uses minimum composites of earlier urban indices to compile minimum soil signature. It is later improved by removing water, increasing the contrast between bare soil and urban ISA and reducing bright bare soil area. This study maps the ISA of all 12 megacities using the annual RS image collection from 2021. GISAI reduced the bare soil signature and achieved an overall accuracy of 87.29%, F1-score of 0.84, and Kappa coefficient of 0.75. However, it has some limitations with grey bare soil and barren hilly areas. By limiting bare soil signature, GISAI broadens the scope of inter-urban studies globally and lengthens potential urban time-series analysis using common multispectral bands.

Conventional methods of crop mapping need ground truth information to train the classifier. Thanks to the frequent acquisition allowed by recent satellite missions (Sentinel 2), we can identify temporal patterns that depend on both phenology and crop management. Some of these patterns are specific to a given crop and thus can be used to map it. Thus, we can substitute ground truth information used in conventional methods with agronomic knowledge. This approach was applied to identify irrigated permanent grasslands (IPG) in the Crau area (Southern France) which play a crucial role in groundwater recharge. The grassland is managed by making three mows during the May-October period which leads to a specific temporal pattern of leaf area index (LAI). The mowing detection algorithm was designed using the temporal LAI signal derived from Sentinel 2 observations. The algorithm includes some filtering to remove noise in the signal that might lead to false mowing detection. A pixel is considered a grassland if the number of detected mows is greater than 1. A data set covering five years (2016-2020) was used. The detection mowing number was done at the pixel level and then results are aggregated at the plot level. A validation data set including 780 plots was used to assess the performances of the classification. We obtained a Kappa index ranging between 0.94-0.99 according to the year. These results were better than other supervised classification methods that include training data sets. The analysis of land-use changes shows that misclassified plots concern grasslands managed less intensively with strong intra-parcel heterogeneity due to irrigation defects or year-round grazing. Time series analysis, therefore, allows us to understand different management practices. Real land-use change in use can be observed, but long time series are needed to confirm the change and remove ambiguities with heterogeneous grasslands.

More than twenty-five years ago the Global Solar UV index (UVI) has been introduced as a simple means of visualizing the intensity of ultraviolet radiation and to alert people to the need for sun protection. In our survey among directors of 436 kindergartens in southern Germany we investigated the level of awareness and knowledge about the UVI as well as the practical consequences for sun protection in kindergartens. Less than half of the directors (n=208, 47.7%) had ever heard of the UVI, and only a small minority of them (n=34, 8.7%) used the daily UVI information to adapt sun protective measures in their kindergartens. Detailed knowledge about the UVI was a rarity among the respondents. The proportion of respondents with self-perceived detailed UVI knowledge was five times higher than actual knowledge assessed by an in-depth structured interview using open-ended questions about the UVI (14.2% vs. 2.8%). No clear relationship of UVI awareness, knowledge, and use to directors' age and gender was found. The UVI-related variables also showed no association with directors' knowledge of risk factors for skin cancer and their attitudes towards tanned skin. Overall, the results paint a sobering picture regarding the penetration of the UVI into sun protection policies of German kindergartens. Future public health campaigns should target increasing awareness and understanding of the UVI as well as its importance for sun protection of children.

Regular physical activity is a very important factor in the healthy development of an individual and an essential part of a healthy lifestyle. However, today's population still suffers from insufficient amount of exercise caused mainly by technical progress and often inappropriate conditions for practicing sports. In relation to this, we are grappling with a steady increase in obesity. During the COVID-19 pandemic, conditions for regular physical activity became even more unfavourable, with the declaration of a state of emergency and anti-pandemic measures leading to the closure of sports grounds and sporting competitions. In our research survey, we attempted to determine whether there would be changes in physical activity and BMI before and after the situation caused by the COVID-19 disease in upper primary school pupils in the Czech Republic. Using a questionnaire survey of a sample of children (n =1456), we found that already before the pandemic, 69% of the observed sample had not met the recommended amount of physical activity and only 67% of the sample was of normal weight. After the end of the anti-pandemic measures, the observed values deteriorated even more. There was a significant decrease in children with normal weight (by 7.5%) and an increase in children with Class 1 obesity. At the same time, we saw a significant decrease in children doing sports.

Background: Nonalcoholic fatty liver disease (NAFLD) is regarded as a component of metabolic syndrome, which has insulin resistance (IR) as the primary physiopathological event. The aim of study was to establish the association between IR, assessed using triglyceride and glucose index (TyG), and histopathological features of NAFLD lesions. Methods: The study included patients with metabolic syndrome. Fasting plasma glucose (FPG), fasting lipid profiles and liver enzymes were measured. IR was assessed by TyG index. Liver biopsy was performed for assessment steatosis and fibrosis. Results: TyG index had a mean value of 8.93 ± 1.45, with a higher value in the patients with overweight (p=0.002) and obesity (p=0.004) than in the patients with normal weight. TyG index mean value of 8.78 ± 0.65 in subjects without NASH, 8.91 ± 0.57 in patients with borderline NASH and 9.13 ± 0.55 in patients with definite NASH. Significant difference was found between subjects without NASH and the ones with definite NASH (p=0.004). The analysis of the area under the ROC curve proved that TyG index is a predictor for NASH (p=0.043). Conclusion: TyG index is a facile tool used to identify individuals at risk for NAFLD, but not for the progression of liver lesions.

This study will investigate different signals and events/news that determined the stock market's movements. As we know, many factors affect the stock market on a daily, weekly, and monthly basis, e.g., rate of interest, exchange rate, and oil prices, etc. Our research will investigate the impact of daily events/news in the KSE-100 index due to several policies announced and events/news in the country because the daily movements in the stock market can be determined only by different signals and events/news. Time series data is collected daily for particular reasons from "The News" (Daily Newspaper, Sunday edition) from 2010 to 2019. The results of this study show that political and global news affects the stock market index ferociously. For investors, the investment in blue chips is not less than a safe haven. When day-to-day transactions are concerned, there is always a higher panic attack than the herd behaviour in the stock exchange. Investors tend to make prompt responses to negative rather than positive news, which makes them risk averters. Our finding also confirmed that the ARCH/GARCH model is better than the simple OLS method concerning stock market upheaval.

The goal of this study was to analyze the forest degradation in the Reserve for San Rafael National Park, Paraguay, during the period 2005-2019. This Reserve is one of the most important forest remnants of the Upper Paraná Atlantic Forest Ecoregion. A multitemporal analysis of degradation was carried out due to the occurrence of three disturbances: forest fires, a twister and illicit crops, using the Continuous Degradation Detection (CODED) algorithm, for which 3 factors were considered: variations due to pixel in the NDFI index values before, during and after every disturbance registered. In this context, the phenomenon with the greatest impact in terms of magnitude of degradation were the forest fires of 2005, being that year at the same time, the one that reported the highest degradation values. Secondly, there are the illicit crops established until the first semester of 2019, and lastly, the twister that occurred in 2017. Our findings demonstrate that CODED algorithm can detect multi-temporal degradation events in a Subtropical Broadleaf Forest, and the post-disturbance regeneration process after every disturbance tends to occur immediately. The response in terms of degradation-regeneration is highly variable, depending of the nature and severity of each disturbance and the vegetation recovery dynamics.

While appropriate nutrient intake is important for older adults, various oral problems cause de-creased masticatory function. This cross-sectional study aimed to identify the factors associated with decreased masticatory performance in older adults. Oral examinations were performed on 80 participants (mean age: 75.10 ± 5.64 years) to determine the number of functional tooth units (FTUs). Symptoms of periodontal and temporomandibular diseases were evaluated via a ques-tionnaire. The tone, elasticity, and dynamic stiffness of the masseter muscle were measured using the Myoton® PRO device. The mixing ability test was used to assess the masticatory performance and the mixing ability index (MAI) was calculated. The analysis of covariance test was performed to adjust for confounding factors and multiple logistic regression analysis was performed to identify the risk factors affecting MAI. A lower MAI was significantly associated with higher tone (p = 0.006) and lower elasticity (p = 0.013). The number of FTUs (adjusted odds ratio [OR] = 0.724, p = 0.029), tone (adjusted OR = 1.215, p = 0.016), and elasticity (adjusted OR = 4.789, p = 0.038) were independently associated with the MAI. Muscle function training and prosthetic treatments may help increase masticatory performance in older adults, which will improve overall health.

The purpose of this study is to investigate the different types of bricks as a construction material. In this study, monitoring different technical specification or characteristics of the bricks. At the end of study, Brick Quality Index (BQI) evaluated. According to BQI, bricks were classified poor to excellent quality.

Background: Adiposity rebound (AR) refers to the second rise of the BMI curve that usually occurs physiologically between 5 and 7 years of age. AR timing has a great impact on children´s health, being the early adiposity rebound (EAR) associated with the development of metabolic disease later in life. Aim: We aimed to investigate the prevalence of EAR in a cohort of preterm newborns. Secondary outcomes evaluated if some determinants such as (1) gender (male/female), (2) type of delivery (caesarean/vaginal), (3) birth weight (SGA/NGA/LGA), (4) type of feeding (5) duration of breastfeeding, (6) timing of introduction of solid food, (7) parental education and (8) parental pre-pregnancy BMI can influence EAR in this cohort. Tertiary aim was to evaluate the prevalence of obesity or overweight at 7 years of age in children according to early versus timely AR. Methods: This is a perspective, population-based longitudinal study, where infants born preterm were evaluated at birth and at 1, 3, 6, 9, 12, 15, 18, 24 months and 3, 4, 5, 6, 7 years of gestational-corrected age. Weight and height data were analyzed, and BMI was calculated. AR was assessed in the growth trajectory in a body mass index (BMI) plot. Results: Of the 250 preterm newborns included, 100 completed the 7 years follow-up and entered in the final analysis. The prevalence of EAR in our cohort of preterm newborns was 54%. EAR was associated with being LGA at birth. No other factors were associated to EAR. Early adiposity rebounders have a significant higher BMI at 7 years compared to children with timely AR (17.2 ±2.7 vs 15.6 ± 2.05, p=0.021). No significant differences were found in the prevalence of obesity or overweight at 7 years of age in children with early or timely AR (29% vs 14% p=0.202). Conclusions: Clinical management of preterm infants should focus on reducing excess weight gain to prevent long-term metabolic risk. Others neonatal factors are not associated to an higher risk of EAR.

The paper presents the influence of different curing conditions – wet, dry and protection against water evaporation on selected properties of concretes with different amount of recycled concrete aggregate previously subjected to atmospheric CO2 sequestration. Additionally, the eco-efficiency bi and ci indexes as well as eco-durability S-CO2 index were calculated. It was found that dry conditions deteriorate the properties of concrete, especially made of blast furnace slag cement, while protection against evaporation allows to achieve results comparable to wet conditions. Moreover, for series with the highest amount of coarse recycled aggregate and after longer period of curing, the difference between the effects of wet curing and protection against water evaporation disappears. The eco-efficiency and eco-durability indexes approach confirms the beneficial effect of blast-furnace slag cement used as a binder but on condition of proper way of curing.

This work evaluates the surface water quality in terms of physico-chemical parameters of the Brahmani River, Odisha using statistical analysis involving the calculation of correlation coefficient and regression equation. Besides this, the work also highlights and draws attention towards the “Water Quality Index” in a simplified format which may be used at large and could represent the reliable picture of water quality. Surface water quality data is taken from OSPCB of various location i.e. Panposh D/S, Rourkela D/S, Rengali, Talcher U/S, Kamalanga D/S, Bhuban, Pattamundai and was assessed for summer, monsoon, winter for the years 2011, 2012, 2013, 2014 and 2015. Average of values, minimum of values and maximum of values of water quality parameters were obtained seasonally over the above mentioned years. Besides this, the standard deviation for the water quality parameters was also obtained for water quality parameters namely pH, Temperature, DO, TDS, Alkalinity, EC, Na+, Ca2+, Mg2+, K+, F-, Cl-, NO3-, SO42- and PO42-. Seasonal changes in various physical and chemical parameters were analysed.The values obtained were compared with the guideline values for drinking water by Bureau of Indian Standard (BIS). A systematic correlation and regression study is carried out for three seasons, showed linear relationship among different water quality parameters. This provides an easy and rapid method of monitoring water quality. Highly significant (0.8< r <1.0), moderately significant (0.6< r <0.8) and significant (0.5< r <0.6) correlations between the parameters have been worked out. High correlation coefficient has been observed between TDS,EC-Na+, Ca2+, Cl-, SO42- ; Na+- Cl-. From the collected quantities, certain parameters were selected to derive WQI for the variations in water quality of each designated sampling site. WQI of Brahmani River ranged from 36.7 to 44.1 which falls in the range of good quality of water.Panposh D/S and Rourkela D/S showed poor water quality in summer and winter season. It is shown that WQI may be a useful tool for assessing water quality and predicting trend of variation in water quality at differentlocations in the Brahmani River.

Cocoa is an important commodity crop not only to produce one of the most complex products such as chocolate from the sensory perspective, but one that commonly grows in developing countries close to the tropics. This paper presents novel techniques applied using cover photography and a novel computer application (VitiCanopy) to assess the canopy architecture of cocoa trees in a commercial plantation in Queensland, Australia. From the cocoa trees monitored, pod samples were collected, fermented, dried and grinded to obtain the aroma profile per tree using gas chromatography. The canopy architecture data were used as inputs in an artificial neural network (ANN) algorithm and the aroma profile considering six main aromas as targets. The ANN model rendered high accuracy (R = 0.82; MSE = 0.09) with no overfitting. The model was then applied to a satellite image from the whole cocoa field studied to produce canopy vigor and aroma profile maps up to the tree-by-tree scale. The tool developed could aid significantly the canopy management practices in cocoa trees that have a direct effect on cocoa quality.

Cost estimating based on building cost index plays an important role in project planning and management by providing accurate cost information. Recently, tremendous advances in cost estimating has been made but serious inaccuracies in it are still too frequently witnessed. This study aims to improve estimating accuracy for residential building costs in New Zealand. In this study, the New Zealand house prices index is involved in the transfer function models to produce forecasts of building costs for one-storey house, two-storey house, and town house in New Zealand. To demonstrate the effectiveness of the proposed models, this study compares the estimate results of the transfer function models with the univariate ARIMA models. The results indicate that the proposed transfer function models can achieve better outcomes than ARIMA models by considering the causality between building costs and New Zealand house prices. During the modelling process, the better cost estimation approach can be identified, and the movements of building costs are shown.

The objective of this work was to investigate the use of remotely sensed vegetation indices to improve the quality of yield maps. The method was applied to the yield data of twelve cornfields from the Data Intensive Farm Management project. The results revealed the need to time shift the yield values up to three seconds to better match the sensor readings with the geographic coordinates. The residuals of the yield prediction model were used to identify points with unlikely yield values for that location, as an alternative to traditional approaches using local spatial statistics, without any assumption of spatial dependence or stationarity. The temporal and spatial distribution of the standardized coefficients for each experimental unit highlighted the presence of trends in the data. At least five out of the twelve fields presented trends that could have been induced by data collection.

The radial distribution networks are designed for unidirectional power flows and are passive in nature. However, with the penetration of Distributed Generation (DG), the power flow becomes bidirectional and the network becomes active. The integration of DGs into distribution network creates many issues with: system stability, protection coordination, power quality, islanding, proper placement and sizing etc. Among these issues, the two most significant are optimal sizing and placement of DGs and their protection coordination in utility network. The proper coordination of relays with high penetration of DGs placed at optimal location increases the availability and reliability of the network during abnormal operating conditions.This research addresses most of the available methods for efficient sizing and placement of DGs in distribution system (numerical, analytical and heuristic) as well as the developed protection coordination techniques for utility networks in the presence of DGs (Artificial Intelligence (AI), adaptive and non-adaptive, multi-agent, hybrid). This paper indicates the possible research gaps and highlights the applications possibilities and methods’ limitations in the area of DGs.

This article investigates if public investments in rural basic infrastructure represent the best strategy for boosting the local economy of rural communities from Romania. The article focuses on one specific program implemented under the Cohesion policy in the framework of the National Plan for Rural Development called Measure 322. Geographically, the research included a sample of rural communes from the North-Western Region of Romania. Moreover, the study also looks at other determinants of local economic development (LED) than infrastructure investments, with a focus on certain feature characterizing Romanian rural communities such as population size, isolation from urban centers, connection with European and national roads networks, educational stock, etc. The research included three steps, namely the construction of the LED Index, a cvasi-experimental research, and a regression model. Our main findings seem to suggest that while investments in infrastructure help the development gap between beneficiaries and non-beneficiaries remains relatively the same. In terms of determinants of LED, percentage of population with a university degree and connection to a European road are the most significant in the Romanian rural context.

The aim of this report is to evaluate the segmental rib index (RI) from T1-T12 spinal level in mild and moderate idiopathic scoliosis (IS) curves of thoracic, thoracolumbar and lumbar type by gender. The relationship of segmental RI to the frontal plane radiological deformity presented as the Cobb angle and to the posterior truncal surface deformity presented as the scoliometric readings of Angle of Trunk Rotation (ATR) in these patients is also assessed. Any statistical significant rela-tionship of these parameters would be very important for biomechanical relations of the rib cage (RC) deformity presented as the rib hump deformity (RHD) and the deformity in the spine and it would thus provide valuable information about scoliogeny. The segmental rib index (RI) is presented in 83 boys and girls with mild and moderate IS. The measurements include the scoliometric readings for truncal asymmetry (TA), the Cobb angle assessment and the segmental RI from T1-T12. The statistical package SPSS 23 was used for statistical analysis. The TA is documented and the Cobb angle is presented by gender and curve type. The segmental RI of thoracic, thoracolumbar and lumbar curves are presented for the first time. The correlations of the segmental RI to surface deformity presented as the rib hump deformity (RHD) in all IS patients and particularly in thoracic curves, to Cobb angle by gender and age and the comparison of the segmental RI index of asymmetric but not scoliotic children to the scoliotic peers by curve (in thoracic, thoracolumbar, lumbar curves) in boys and girls are presented. The findings emphasize the significant protagonistic role of the thoracic asymmetry in relation to the spinal deformity mainly in girls for the thoracic and in boys for the thoracolumbar curves. The cut-off point of age of the examined scoliotics is 14 years, that is when the RI shows stronger correlation with the spinal deformity, namely when the thoracic deformity is decisively effective to the developing thoracic spinal deformity, in terms of Cobb angle. In summary, the results of this study provide aetiological implications for IS, as far as the role of thorax is con-cerned.

Today electricity is distributed to the individual users via physical Copper connections. From the power stations, the energy is transported through transmission lines where the electricity, sinusoidally modulated at a fixed frequency of about 50 Hz, is raised up to a voltage in a range approximately variating between 30, and 110 kV. When electrons, aligned at this voltage, pass through the transmission lines, they cause coherent vibrations, sometimes even audible in the acoustic frequencies. In the spectrum of movements to which electric cables are subjected, there are also unexpected and sporadic movements caused by winds and rain. The problem of carrying out persistent, precise and spatially distributed monitoring of transmission line health is to use a large number of sensors physically distributed everywhere and somehow transmit the results to a control station. The use of synthetic aperture radar (SAR) data could be a viable solution of persistent and wide-area high-voltage vibration monitoring. In this paper we produce a comprehensive survey on how to monitor both movements in terms of vibrational displacement, due to weathering, and those due to electricity transmission, normally fixed at about 50 Hz. The results demonstrate the technical feasibility of an operational use of SAR for these purposes in the very short term. This would allow the possibility of monitoring malfunctions such as black-outs or other frequency anomalies.

A high-gain broadband circularly polarized crossed dipole antenna is designed. This antenna utilizes two pairs of cross dipoles and a pair of phase delay lines to form circularly polarized radiation. Open-circuit stubs are loaded on the four arms of these two pairs of cross dipoles to introduce new circularly polarized resonating frequency. A rectangular ring patch is introduced directly below the cross dipoles to form the third circularly polarized resonating frequency, thereby broadening the axial ratio bandwidth of the antenna. In addition, metal posts are loaded at the four right angles of the rectangular ring patch to increase the antenna gain. Measurement results show that the antenna achieves a 3dB axial ratio bandwidth of 29.2% (1.9 GHz-2.55 GHz) and maintains a gain of 7.5 dB within the passband, exhibiting good circularly polarized radiation performance.

Background/Objectives: Encouraging results reported of Platelet-Rich Plasma (PRP) treatment for knee osteoarthritis (KOA). The present retrospective study reports the efficacy and safety of a high dose of neutrophile and red blood cell-depleted PRP to treat 212 patients with KOA. Methods: 212 consecutive patients diagnosed with Kellgren-Lawrence (KL) grading 1-3 KOA chronic knee pain for at least 1 year were treated with 3 injections at 15-day intervals with a high dose of neutrophil-depleted PRP (4 billion platelets). Clinical outcomes were retrospectively recorded as a percentage of responders at 3,6, and 12-month follow-up, following the OMERACT-OARSI criteria. Pain through VAS score and WOMAC score have also been recorded. Results: 4ml of PRP containing 4X109 platelets were obtained by single spin centrifugation and injected intra-articular into each patient with no pre-activation. The overall responder rate of patients responding to OMERACT-OARSI criteria at 3,6,12 months was 68.9%, 72,7% and 70,6%. There was a significant improvement in VAS and WOMAC scores at 3-, 6- and 12-month follow-up compared to the pre-treatment value (p&lt; 0.01). The lowest VAS score was observed at 6 months overall and in all three-grade KL groups. KL2 groups showed the best results regarding pain reduction and WOMAC score at 6 months (p&lt; 0.01). Conclusions: a high dose of neutrophil-depleted PRP is an effective treatment for KL1-3 KOA. It provides symptomatic relief, can potentially reduce disease progression, and has sustained effects for up to 12 months.

Aiming at the problems of inaccurate segmentation of long object and information loss of small object in real-time semantic segmentation algorithm, this paper proposes a lightweight multi-branch real-time semantic segmentation network based on BiseNetV2. The new auxiliary branch makes full use of spatial details and context information to cover the long object in the field of view. Meanwhile, in order to ensure the inference speed of the model, the asymmetric convolution is used in each stage of the auxiliary branch to design a structure with low computational complexity. In the multi-branch fusion stage, the alignment and fusion module is designed to provide guidance information for deep and shallow feature mapping, so as to make up for the problem of feature misalignment in the fusion of information at different scales, and thus reduce the loss of small target information. In order to further improve the model’s awareness of key information, a global context module is designed to capture the most important features in the input data. The proposed network uses NVIDIA GeForce RTX 3080 Laptop GPU experiment, on the road street view data set Cityscapes and CamVid average occurring simultaneously ratio reached 77.1% and 78.4% respectively, with running speed of 127 frames/s respectively and 112 frames/s. The experimental results show that the proposed algorithm can achieve real-time segmentation and improve the accuracy significantly, showing good semantic segmentation performance

Utilizing deep learning for semantic segmentation of cropland from remote sensing imagery has become a crucial technique in land surveys. Cropland illustrates diverse morphologies and degrees of fragmentation on the Earth’s surface, underscoring the importance of accurately perceiving the complex boundaries of cropland which are crucial for effective segmentation. This paper introduces a UNet-like boundary-aware compensation model BAFormer. Cropland boundaries typically exhibit rapid transformations in pixel values and texture features, often appearing as high-frequency features in remote-sensing images. To enhance the recognition of these high-frequency features as represented by cropland boundaries, the proposed BAFormer integrates a Feature Adaptive Mixer (FAM) and develops a Deep Wide Large Kernel Multi-Layer Perceptron (DWLK-MLP) to enrich the global and local cropland boundaries features separately. Specifically, FAM adaptively mixes high-frequency and low-frequency features through the advantages of convolution and self-attention; DWLK-MLP expands the convolutional receptive field by deeply decomposing large kernel convolutions. The efficacy of BAFormer has been evaluated on the Vaihingen, Potsdam, and LoveDA public datasets, as well as the Mapcup dataset. It has demonstrated advanced performance, achieving mIoU scores of 84.5%, 87.3%, 53.5%, and 83.1% on these datasets respectively. Notably, BAFormer-T, the lightweight iteration of the model, surpasses other lightweight models on the Vaihingen dataset with scores of 91.3% F1 and 84.1% mIoU. The source code is available at https://github.com/WangYouM1999/BAFormer.

The extensive metabolic diversity of microalgae, coupled with their rapid growth rates and cost-effective production, position these organisms as highly promising resources for a wide range of biotechnological applications. These characteristics allow microalgae to address crucial needs in both the agricultural, medical, and industrial sectors. Microalgae are proving to be val-uable in various fields, including the remediation of diverse wastewater types, the production of biofuels and biofertilizers, and the extraction of various products from their biomass. For decades, the microalga Chlamydomonas has been widely used as a fundamental research model organism in various areas such as photosynthesis, respiration, sulfur and phosphorus metabolism, nitrogen metabolism, and flagella synthesis, among others. However, in recent years, the potential of Chlamydomonas as a biotechnological tool for bioremediation, biofertilization, biomass, and bio-products production has been increasingly recognized. Bioremediation of wastewater using Chlamydomonas presents significant potential for sustainable reduction of contaminants and fa-cilitates resource recovery and valorization of microalgal biomass, offering important economic benefits. Chlamydomonas has also established itself as a platform for the production of a wide va-riety of biotechnologically interesting products, such as different types of biofuels, and high-value-added products. The aim of this review is to achieve a comprehensive understanding of the potential of Chlamydomonas in these aspects, and to explore their interrelationship, which would offer significant environmental and biotechnological advantages.

Previous studies show that women with a history of high-grade CIN have a greater risk of subsequent high-grade anogenital intraepithelial neoplasia or cancer, and the risk is greater for vaginal cancer than for anal and vulvar cancers. It is hypothesized that the laparoscopic hysterectomy procedure may cause a higher incidence of VaIN in hysterectomized women. There are few studies addressing this issue and they show mixed results. This study aimed to investigate the incidence of high-grade or worse VaIN in the population of women undergoing hysterectomy for CIN3 or benign uterine disease, illustrate treatment options and follow-up. Methods: This retrospective study was conducted on 170 women who underwent laparoscopic hysterectomy for high-grade cervical intraepithelial neoplasia (CIN3) or benign gynecological disease. The follow-up strategy included performing a cotest and colposcopy with biopsy if necessary. The median time between primary treatment and diagnosis of high-grade VaIN was 18 months. Results: High grade or worse VaIN was found in 8 patients after hysterectomy (4.7%). All cases of high-grade VaIN occurred in women with persistent HPV infection. The most frequent genotype was 16. Women hysterectomized for CIN3 showed an 8-fold greater risk than women hysterectomized for benign disease of developing high-grade VaIN. The risk of VaIN is low in women hysterectomized for benign disease. The risk of developing VaIN is greater in women with viral persistence Conclusion. All these elements suggest that it is the history of HPV-related disease of the lower genital tract and viral persistence, rather than hysterectomy itself, that should be considered a risk factor for the development of high-grade VaIN. After hysterectomy, patients with a history of CIN should undergo annual screening with vaginal dome cytology and HPV testing.

Thermal expansion of four alkaline-earth borates, namely Ca3B2O6 (0D), CaB2O4 (1D), Sr3B14O24 (2D) and CaB4O7 (3D), have been studied by in situ high-temperature powder X-ray diffraction (HTXRD). Strong anisotropy of thermal expansion is observed for the structures of Ca3B2O6 (0D) and CaB2O4 (1D) built up from BO3 triangles only: these borates exhibit the maximal expansion perpendicular to the BO3 plane, i.e. along the direction of weaker bonding in the crystal structure. Layered Sr3B14O24 (2D) and framework CaB4O7 (3D) built up from various B-O groups expand less anisotropically. Thermal properties of the studied compounds compared to the other alka-line-earth borates are summarized depending on the selected structural characteristics like anion dimensionality, residual charge per one polyhedron (BO3 BO4), cationic size, and structural com-plexity. For the first time these dependencies were established as an average for both types of polyhedra (triangle and tetrahedron) occurring in the same structure at the same time. The most common trends were identified for : (i) Melting temperature decreases as the dimensionality of the borate polyanion, and more precisely, as the residual charge per one polyhedron (triangle or tetrahedron) decreases; (ii) volumetric expansion decreases while the degree of anisotropy in-creases weakly when the residual charge decreases; (iii)both trends (i) and (ii) are most steady within borates built by the triangles only, while the borates built by both triangles and tetrahedra show a larger scatter in values.

The growing interest in benchtop NMR systems is visible in a vast number of applications in science and industry. Low-field nuclear magnetic resonance (LF-NMR) became an instant in technologies that productions are dependent on the reliable structure identification, grade and purity control, chemical process inspection or reaction monitoring. Beyond the benefits of being cost-, space-, maintenance- and user friendly, insufficient sensitivity and low signal resolution are the main drawbacks, due to which the low-field NMR (LF-NMR) in the fields of organic chemistry and synthesis remains limited to solely academic teaching purposes. Herein, we discuss the possibilities of LF-NMR for the needs of organic chemistry and synthesis on a set of compounds 1-4 achieved as the products of student’s laboratory course and organic derivatives 5-8 that are from our research interests. Chemical structure determination of all compounds 1-8 presented herein was performed using the benchtop-type NMR instrument operating at 60 MHz (Pulsar Oxford Ltd.). Structure of novel compounds 5-7 prepared under the aims of our research was characterized by combined 1H/19LF-NMR and compared with an appropriate high-field NMR data from Bruker Ascend Instrument (400 MHz). Finally, possibilities of the low-field NMR as an analytical tool for the research purposes in the fields of organic chemistry and synthesis are documented on a set of 1H and 2D 1H-1H COSY for azomethine 8.

High pathogenicity avian influenza (HPAI) H5N1 clade 2.3.4.4b continues to have a substantial impact on wildlife, globally. A recent study has described the putative detection of HPAI in clinically healthy penguins, and those which were fitted with satellite tags reportedly engaged in apparently normal foraging behaviour in the months following sample collection. Herein we investigate the diagnostic approach utilised, and reveal that while the authors likely did detect subtype H5 influenza A virus, the most parsimonious conclusion is that they detected low pathogenicity H5 rather than HPAI H5N1. In response, we have provided an overview key considerations when selecting a diagnostic and outline published diagnostic assays that should be considered for future studies.

Nanoporous materials, such as Metal-Organic Frameworks (MOFs), are renowned for their high selectivity as gas adsorbents due to their specific surface area, nanoporosity, and active surface chemistry. A significant challenge for their widespread application is their behavior and reduced gas uptake in wet conditions, attributed to competitive adsorption between gas and water. The current understanding of gas adsorption in wet materials is constrained by studies that utilize only small amounts of powdered porous materials (in the milligram range) within very small reactors (1-5 mL). This leaves a significant gap in knowledge about gas adsorption behaviors in larger reactors and when MOF sample sizes are increased (to the gram scale) for scaling up the process. Additionally, there is a notable dearth of experimental research in situations where MOFs are heavily saturated with water. To address these gaps, this study measures CH4 adsorption in MOFs under conditions of high moisture content, using larger samples of MOFs (in grams) and a large volume reactor. We selected commercially available MOFs, including HKUST-1, ZIF-8, MOF-303, and activated carbon. A high-pressure isotherms (at T = 274.15 K) using volumetric approach were measured to qualitatively compare the moles of gas adsorbed under both dry and wet conditions across different MOFs and weights. Experimental results show that the presence of water led to a decrease in total CH4 mmol adsorption in MOFs, with a more significant decrease observed in hydrophilic MOFs compared to hydrophobic ones. For hydrophilic MOFs, presence of crossover isotherms at crossover pressure provided evidence of water's conversion to hydrate and its positive role in enhancing total gas uptake, which varied among different hydrophilic MOFs. Oversaturated MOFs showed a larger deviation between dry and wet cases at higher pressures. The high-pressure isotherm data confirm the positive role of hydrophilic MOFs in the conversion of water to hydrate in oversaturated MOFs when MOFs sample size is large.

We present a study of the radio variability of bright, $S_{1.4}\geq100$ mJy, high-redshift quasars at $z\geq3$ on timescales up to 30--40 years. The study involved simultaneous RATAN-600 measurements at frequencies of 2.3, 4.7, 8.2, 11.2, and 22.3 GHz in 2017--2020. In addition, data from the literature were used. We have found that the variability index $V_S$ of the quasars ranges from 0.02 to 0.96, with about half of the objects in the sample showing a variability index in the range of 0.25--0.50, which is comparable to that of the blazars at lower redshifts. The distribution of $V_S$ at 22.3 GHz is significantly different from that at 2.3--11.2 GHz, which may be attributed to the fact that a compact AGN core dominates at the source's rest frame frequencies greater than 45 GHz, leading to higher variability indices obtained at 22.3 GHz (the $V_S$ distribution peaks around 0.4) compared to the lower frequencies (the $V_S$ distribution peaks around 0.1--0.2). Several source groups with distinctive variability characteristics were found using cluster analysis of quasars. We propose 7 new candidates for gigahertz peaked-spectrum (GPS) sources and 5 new megahertz peaked-spectrum (MPS) sources based on their spectrum shape and variability features. Only 6 out of 23 sources previously reported as GPS demonstrate a low variability level typical of classical GPS sources ($V_{S} < 0.25$) at 4.7--22.3~GHz. When excluding the highly variable peaked-spectrum blazars, we expect no more than 20\% of the sources in the sample to be GPS candidates and no more than 10\% to be MPS candidates.

Most works related to the identification of mathematical nonlinear systems make one suppose that such approaches can always be directly applied to any nonlinear system. This misconception produces a great deal of discouragement when the obtained results are not the expected ones. Thus, the current work hypothesizes that the most information one has about the mathematical structure of the model, the most precise the identification result should be. Therefore, a variant of the Sparse Identification of Nonlinear Dynamics (SINDY) approach is presented to obtain the full mathematical nonlinear model of a high-order system with coupled dynamics, namely, a commercial quadcopter. Furthermore, due to its high sensitivity to inputs, a control system is devised using the identified model to stabilize the quadcopter. This illustrates the effectiveness of the proposed identification method.

A novel process design for damage-free and highly accurate positional integration of an optical multi-axial force sensor into a hollow tube by means of rotary swaging is introduced. Numerical simulations reveal relevant process phenomena of thin disc joining inside a pre-toothed hollow tube and help to find an optimal process design. Experimental trials show a significant effect of axial material flow and the number of tools in a rotary swaging process. By taking these effects into account, a successful form- and force-fit joining of the sensor carrying discs into the tube can be achieved. A successful joining of an optical sensor for bending forces and torque measurement shows hysteresis-free sensory behavior and thus backlash-free joining of the sensor carrier discs. The paper finishes with presenting an approach for closed-loop position controlling during the joining process and numerically investigation of the process design.

Whole genome alignment (WGA) is a critical process in comparative genomics, facilitating the detection of genetic variants and aiding our understanding of evolution. This paper offers a detailed overview and categorization of WGA techniques, encompassing suffix tree-based, anchors-based, and graph-based methods. It elaborates on the algorithmic properties of these tools, focusing on performance and methodological aspects. The paper underscores the latest progress in WGA, emphasizing the increasing capacity to manage the growing intricacy and volume of genomic data. However, the field still grapples with computational and biological hurdles affecting the precision and speed of WGA. We explored these challenges and potential future solutions. This paper aims to provide a comprehensive resource for researchers, deepening our understanding of WGA tools and their applications, constraints, and prospects.

The performance analysis of the internal/external flows around a high speed vehicle in near-space is fundamental and critical to the configuration and structure design for high speed aircraft. In this paper, the two-dimensional coupled implicit Reynolds Average Navier-Stokes (RANS) solver and RNG k–ε turbulence model is employed to numerically simulate the flow field of an integrated high speed vehicle. The flow field are divided three parts to solve separately and compared with that solved by integrated simulation. The flow field are decomposed to save computer storage and simulation time. The first part is inlet/isolator, the second part is combustion chamber and the third is nozzle. In the computation process, the outlet condition of isolator is endowed to the inlet boundary of combustion chamber and the outlet boundary of combustion chamber is endowed to the inlet boundary of nozzle, then the whole flow field of integrated high speed vehicle is solved. Aerodynamic characteristic of fragment-computation and integration-computation is comparatively analyzed at different angles of attack, the results show that the maximum deviation of lift coefficient obtained by fragment-computation is less than 3% compared with that by integration, the maximum deviation of drag coefficient fragment-computation is less than 5% compared with that by integration, while pitching moment coefficient deviation less than 12%. However, for simulation time-consumption, the time used by fragment-computation reduces 45% compared with integration-computation. Meanwhile, by components force analysis, it can be concluded that the aerodynamic property of inlet/isolator can been obtained separately and hardly effected by other parts.

The ratio between blade height and chord, named aspect ratio (AR), plays an important role in compressor aerodynamic design. Once selected, it influences stage performance, blade losses, and the stage stability margin. The choice of the design AR involves both aerodynamic and mechanical considerations, and a reasonable aim is frequently to achieve a desired operating range while maximizing efficiency. For a fixed set of aerodynamic and geometric parameters there will be an optimal choice in AR that achieves a maximum efficiency. However, for a state-of-the-art aero-engine design optimality means multi-objective optimality, that is reaching the highest possible efficiency for a number of operating points while achieving a sufficient stability margin. To this end, the influence of the AR on the performance of the first rotor row of a multistage multi-objective high-speed compressor design is analyzed. A careful setup of the high-speed aerodynamic design problem allows the effect of the AR to be isolated. Close to the optimal AR, only a modest efficiency variation is observed, but a considerable change in compressor stability margin (SM) is noted. Decreasing the AR allows for an increasing efficiency, but at the expense of a reduced surge margin. This allows the designer to trade efficiency for stability. Increasing the AR, however, is shown to reduce both surge margin and efficiency, hence a distinct optimality in stability is observed for the analyzed rotor blade row. In this work, the optimality in surge margin with respect to AR is observed whereas a close to optimal efficiency. The predicted range from AR=1.10 to AR=1.64, is only indicative, considering that the definition of a multi-objective optimality requires balancing efficiency and surge margin and that the choice of balancing these two criteria requires making a design choice along a pareto optimal front.

This study aimed to use biomineralization technology to improve the bond strength of fiber-reinforced lightweight aggregate concrete (LWAC) after exposure to temperatures of 300 °C and 500 °C. The specimens of a control group (Group A) and two experimental groups (Group B and Group C) were prepared. These specimens healed themselves in different ways after exposure to high temperatures and pull-out tests. The self-healing method of Group A involved placing the specimen into an incubator. The self-healing method of Group B was the same as that of Group A. The self-healing method of Group C involved immersing the specimen in a mixed solution of urea and calcium acetate for two days, then taking it out and placing it in an incubator for two days. A cycle of four days was undertaken until the desired age was reached. After the specimens were healed to the planned age, the first and secondary pull-out tests and repair compound identification were carried out. After exposure to a temperature of 300 °C and self-healing for 90 days, compared with the specimens in Group A, the relative bond strength ratios of the secondary pull-out tests of the specimens in Group C increased by 20.3%. This indicates that biomineralization can effectively improve the bond strength of LWAC after high-temperature damage.

In the broader landscape of cryptocurrency risk management, this study delves into the nuanced estimation of Value at Risk (VaR) for a uniformly weighted portfolio of cryptocurrencies, employing the bivariate Normal Inverse Gaussian distribution renowned for its semi-heavy tails. Utilizing high-frequency data spanning from January 1st, 2017, to October 25th, 2022, with a primary focus on Bitcoin and Ethereum, our research seeks to accentuate the resilience of VaR methodology as a paramount risk assessment tool. The essence of our investigation lies in advancing the comprehension of VaR accuracy by quantitatively comparing observed returns of both cryptocurrencies with their corresponding estimated values, with a central theme being the endorsement of the Normal Inverse Gaussian distribution as a potent model for risk measurement, particularly in the domain of high-frequency data. To bolster the statistical reliability of our results, we adopt a forward test methodology, showcasing not only a contribution to the evolution of risk assessment techniques in Finance but also underscoring the practicality of sophisticated distributional models in econometrics. Our findings not only contribute to the refinement of risk assessment methods but also highlight the applicability of such models in precisely modeling and forecasting financial risk within the dynamic realm of cryptocurrencies, epitomized by the case study of Bitcoin and Ethereum.

This study evaluated the effects of high-temperature and high-pressure treatment on the antioxidant and anti-inflammatory activities of carrot extracts. The total polyphenol and flavonoid content of heated carrot extract increased as the heating temperature increased, with 403.93 mg GAE/100 g and 53.14 mg CE/100 g at 150°C. DPPH and ABTs radical scavenging activity (IC50) of heated carrot extract also increased as the heating temperature increased, with 4.65 mg/mL and 7.31 mg/mL, respectively, at 150°C. The reducing power increased with the heating temperature. Heated carrot extract did not exhibit any temperature- or concentration-dependent cytotoxicity. Nitric oxide (NO) generation was suppressed as the heating temperature and NO production increased. The heated carrot extract showed a decrease in the production of dose-dependent TNF-α, IL-1β, and IL-6 compared to the control group. The above results show that heated carrot extract had effective antioxidant and anti-inflammatory activities.

Background: Oscillation and pulmonary expansion (OPE) therapy can decrease postoperative pulmonary complications in a general surgical population, but its effect after cardiac surgery has not been reported, to our knowledge. We hypothesized that using an OPE device after cardiac surgery before extubation would decrease pulmonary complications. Methods: This retrospective cohort study included adults undergoing elective open cardiac surgery at our institution from January 2018 through January 2019, who had an American Society of Anesthesiologists score of 3 or greater. For mechanically ventilated patients after cardiac surgery, a new OPE protocol was adopted July 1, 2019, comprising an initial 10-minute OPE treatment administered in-line with the ventilator circuit, then continued treatments for 48 hours after extubation. Severe postoperative respiratory complications (primary outcome measure) included need for antibiotics, increased supplemental oxygen use, and prolonged hospital length of stay (LOS). Demographic, clinical, and outcomes data were compared for patients before (usual care with postextubation hyperinflation) and after protocol implementation (OPE). Results: Of 104 patients, 54 patients received usual care, and 50 received OPE. Usual-care recipients had more men (74% vs 62%; P=.19) and were older (median, 70 vs 67 years; P=.009) than OPE recipients. The OPE group had a significantly shorter hospital LOS than the usual-care group (mean, 6.2 vs 7.4 days; P=.04). Other measures improved with OPE but did not reach significance: shorter ventilator duration (mean, 0.6 vs 1.1 days with usual care; P=.06) and shorter LOS in the intensive care unit (mean, 2.7 vs 3.4 days; P=.06). On multivariate analysis, intensive care unit LOS was significantly shorter for the OPE group (mean difference, 0.85 days; 95% CI, 1.65 to 0.06; P=.04). The OPE group had a lower percentage of postoperative complications (10% vs 20%). Conclusion: OPE therapy after cardiac surgery is associated with decreased ICU and hospital LOS.

We present a design of electrostatic comb driver to improve and investigate its actuation performance. The proposed electrostatic comb actuator (ECA) is composed of two set of interdigitated comb microstructures, the inner combs are fixed to form the fish-bone microstructures and the outer combs are movable and connected to crab-leg flexure beams microstructures. The ECA is investigated to optimize the actuation performance by changing the comb shape and the intersection angle of crab-leg flexure beams. The comb shapes are compared between the traditional rectangle shape and the trapezoid shape, while the intersection angles of crab-leg flexure beams are compared between 45°, 60°, and 90° on the influences of ECA displacement and stability characteristics. These parameters are investigated for their impacts on the dynamic comb displacement and driving voltage. Under the condition of a driving DC bias voltage of 100 volts, the ECA displacement is firstly increased and then gradually decreased by increasing the comb finger length. The maximum displacement of ECA with trapezoid comb is 47.2 μm while that of ECA with rectangle comb is 22.4 μm. By using trapezoid comb shape to replace the rectangle comb under the same conditions, the ECA displacement is improved 2-fold. To enhance the stability of ECA system, the intersection angle of 90˚ of crab-leg flexure beams shows highest stability that is great better than the intersection angle of 45° and 60° of crab-leg flexure beams by increasing the driving different DC bias voltage to 100 volts on ECA. The stability of the ECA with the intersection angle of 90° of crab-leg flexure beams is enhanced 1.1-fold and 1.4-fold compared to that of 45° and 60° of crab-leg flexure beams, respectively. This design provides an optimized approach to the electrostatic comb actuator that can be used expansively in the gyroscope, motion sensor, position sensor, imaging sensor, optical sensor, and so on.

We discuss how the interaction of electrons with an overdamped optical phonon can give rise to a strange-metal behavior over extended temperature and frequency ranges. Although the mode has a finite frequency, an increasing damping shifts spectral weight to progressively lower energies so that, despite the ultimate Fermi liquid character of the system at the lowest temperatures and frequencies, the transport and optical properties of the electron system mimic a marginal Fermi liquid behavior. Within this shrinking Fermi liquid scenario, we extensively investigate the electron self-energy in all frequency and temperature ranges, emphasizing similarities and differences with respect to the marginal Fermi liquid scenario.

Due to the lack of theoretical research on the amount of spatio-temporal information in the high-speed photography technologies, obtaining an optimized system with a best amount of spatio-temporal information remains a challenge, resulting in insufficient effective information and observation accuracy for ultrafast events. The paper presents an ultrafast raster imaging (URI) system with a large amount of spatio-temporal information based on the all-optical raster principle in single-shot. Specifically, we derive the optimal equation of spatial resolution and the expression for the maximum amount of spatio-temporal information that can achieve excellent performance for an URI system. It serves as a general guideline for getting a large amount of information design in the URI system. Compared to the existing URI systems, the advanced URI system exhibits an improvement of nearly 1 order of magnitude in the amount of spatio-temporal information, and more than twofold in spatial resolution. It shows a great potential for capturing intricate and non-repetitive ultrafast events on the femtosecond time scale.

New ways of generating energy are currently being discussed, with a transition from traditional primary sources to more environmentally friendly options, particularly renewables. Energy storage is also closely related to this transition. Battery storage currently dominates this area. However, flywheel energy storage system (FESS) technology offers an alternative that uses stored kinetic energy to be transformed into mechanical energy and, using a motor-generator, electrical energy. FESS technology is thus flexible and can be applied in different industrial applications. The management of the technology of recycling W-MMC waste material from other products and the subsequent trial production of high-strength W-MMC material with a density of more than 17 500 kg/m3 from recycled powders allowed to test the limits of the so-called "heavy" flywheels used in rotor production. Materials with densities ≥ 7 800 kg/m3, and operating at lower to medium speeds up to 20 000 rpm. The results achieved lead to the conclusion that the developed recycled materials of the W-MMC type with a density ≥ 17 500 kg/m3, with a yield strength of 1 200 - 1 700 MPa depending on the production method, can be used as a substitute for the structural steels used today, without an enforced reduction of the maximum allowed rotor speed due to exceeding the maximum allowed stress.

The processes of hydrogen reduction of silicon and germanium chlorides under the conditions of high-frequency (40.68 MHz) counteracted arc discharge stabilized between two rod electrodes are investigated. The main gas-phase and solid products of plasma-chemical transformations are determined. Thermodynamic analysis of SiCl4 + H2 and GeCl4 + H2 systems for optimal process parameters was carried out. Using the example of hydrogen reduction of SiCl4 by the method of numerical modeling, gas-dynamic and thermal processes for this type of discharge are investigated. The impurity composition of gas-phase and solid reaction products is investigated. The possibility of single-stage production of high-purity Si and Ge mainly in the form of compact ingots, as well as high-purity chlorosilanes and trichlorogermane, is shown.

Implementing High-Performance Computing to solve In-Memory Data Grid (IMDG)-based energy infrastructure resilience research problems in a heterogeneous environment presents a challenge to workflow management systems. Large-scale energy infrastructure needs multi-variant planning and tools to allocate and dispatch resources in IMDG taking into account the subject domain specificity, resource characteristics, and constraints and quotas for resource use. To that end, we propose a workflow management system using our Orlando Tools framework. To scale computing resources, we provide their integration and use corresponding software to determine key application parameters that can significantly impact the processed data size and the required number of allocated resources. We automated the IMDG cluster launch for the workflow executions. To demonstrate the advantage of our solution, we apply it to evaluate the resilience of the existing energy infrastructure model. Compared to similar approaches, our approach explores large infrastructures by modeling many simultaneously failed elements of different types up to the number of network elements. In terms of problem-solving efficiency and resource use, we achieve near-linear speedup with increasing the number of nodes of each resource.

Using numerical software to establish a three-dimensional geological model of shield tunneling through fault fracture zones, considering the synchronous grouting effect at the shield tail, the disturbance of various geotechnical structures in the fault fracture zone under deep burial and high water pressure conditions is studied. According to the comparison between the numerical model analysis results and the on-site inspection results of the entire process of Shiziyang B3 section, synchronous grouting at the shield tail is the main reason for the changes in soil and water pressure in the fault fracture zone area. The soil and water pressure changes strongly during shield tunneling, and the maximum excess pore pressure value occurs when the shield tail passes. When the shield tunneling machine is far away, the soil and water stress shows a downward trend. The impact of synchronous grouting decreases with the increase of tunneling distance. Due to the difference in permeability, the variation law of pore pressure in the fault fracture zone is significantly different from the original rock, leading to a faster increase in pore pressure in the fracture zone area and a wider range of influence.

Machinery degradation assessment can offer meaningful prognosis and health management in-formation. Although numerous machine prediction models based on artificial intelligence have emerged in recent years, they still face a series of challenges: (1) Many models continue to rely on manual feature extraction. (2) Deep learning models still struggle with long sequence prediction tasks. (3) Health indicators are inefficient for remaining useful life (RUL) prediction with cross-operational environments when dealing with high-dimensional datasets as inputs. This research proposes a health indicator construction methodology based on a transformer self-attention transfer network (TSTN). This methodology can directly deal with the high-dimensional raw dataset and keep all the information without missing when the signals are taken as the input of the diagnosis and prognosis model. First, we design an encoder with a long-term and short-term self-attention mechanism to capture crucial time-varying information from a high-dimensional dataset. Second, we propose an estimator that can map the embedding from the encoder output to the estimated degradation trends. Then, we present a domain dis-criminator to extract invariant features from different machine operating conditions. The case studies with the FEMTO-ST bearing dataset and the Monte Carlo method for RUL prediction during the degradation process are conducted. The experiment results fully exhibited the signif-icant advantages of the proposed method compared to other state-of-the-art techniques.

Selecting drought-tolerant and more water-efficient wheat genotypes is a research priority, spe-cifically in regions with irregular rainfall or areas where climate change is expected to result in reduced water availability. The objective of this work was to use high-throughput measurements with morphophysiological traits to characterize wheat genotypes in relation to water stress. Field experiments were conducted from May to September 2018 and 2019, using a sprinkler bar irriga-tion system to control water availability to eighteen wheat genotypes: BRS 254; BRS 264; CPAC 01019; CPAC 01047; CPAC 07258; CPAC 08318; CPAC 9110; BRS 394 (irrigated biotypes) and Aliança; BR 18_Terena; BRS 404; MGS Brilhante; PF 020037; PF 020062; PF 120337; PF 100368; PF 080492; TBIO Sintonia (rainfed biotypes). The water regimes varied from 22 to 100% of the crop evapotranspiration replacement. Water stress negatively affected gas exchange, vegetation indices and grain yield. High throughput variables TCARI, NDVI, OSAVI, SAVI, PRI, NDRE and GNDVI had higher correlation with yield and morphophysiological measurements. The drought re-sistance index indicated that genotypes Aliança BRS 254, BRS 404, CPAC 01019, PF 020062, and PF 080492 were more drought tolerant.

The valley pseudospin properties of electrons in two–dimensional hexagonal materials result in lots of fascinating physical phenomena, which opens up the new field of valleytronics. The valley-contrasting physics aims at distinguishing the valley degree of freedom based on valley–dependent effects. Here, we theoretically demonstrate that both of the valley–selective high harmonic generation and valley–selective electronic excitation can be achieved by using an orthogonal two–color (OTC) laser field in gapped graphene. It is shown that the asymmetry degrees of harmonic yields in the plateaus, cutoff energies of generated harmonics and electron populations from two different valleys can be precisely controlled by the relative phase of the OTC laser field. Thus the selectivity of the dominant valley for the harmonic radiation and electronic polarization can be switched by adjusting the relative phase of the OTC laser field. Our work offers an all–optical route to produce the valley–resolved high harmonic emissions and manipulate the ultrafast valley polarization on a femtosecond timescale in condensed matter.

Mycoviruses are widespread across the major taxa of fungi including yeasts. Mycoviruses in the yeast fungus Geotrichum candidum are not well studied with three G. candidum-associated viral species characterized to date, all of which belong to the Totiviridae genus Totivirus. In this study, we report the molecular characteristics of another two totiviruses co-infecting isolate Gc6 of G. candidum. The two totiviruses were tentatively named Geotrichum candidum totivirus 2 (GcTV2-Gc6) and GcTV4-Gc6). Both viruses have typical genome organization of totiviruses comprising two ORFs encoding capsid protein (CP) and RNA-dependent RNA polymerase (RdRp) at the N and C termini, respectively. Genomes of GcTV2-Gc6 and GcTV4-Gc6 are 4592 and 4530 bp long, respectively. Both viruses contain the -1 frameshifting elements and their proteins could be expressed as a single fusion protein. GcTV2-Gc6 is closely related to a totivirus isolated from the same host whereas GcTV4-Gc6 is related to insect-associated totiviruses. The phylogenetic analysis indicated that GcTV2-Gc6 and GcTV4-Gc6 belong to two different sister clades, I-A and I-B, respectively. It is interesting that all viruses identified from G. candidum belong to the genus Totivirus. It is possible that the RNA interference (RNAi) mechanism is not active to suppress totivirus accumulation in isolate Gc6.

Understanding the thermal cracks of rock caused by high temperature is of great help to the development of underground engineering, such as geothermal mining, underground coal gasification. Although there has been many study on thermal cracking, it is not systematic and in-depth enough. In order to deeply study the thermal crack mechanism of rock, this paper conducted thermal cracking experiments on granite at different temperatures and heating/cooling paths, and qualitative and quantitative analysis was conducted on the crack initiation characteristics, propagation paths, and crack network morphology of rock thermal crack under different test conditions. The thermal crack mechanism was also analyzed from the perspectives of mineral petrology, fracture mechanics, thermodynamics, and other aspects. The research results show that there are two obvious mutation points in the study temperature range for samples with fast cooling paths (SF path: slow heating and fast cooling; FF path: fast heating and fast cooling), around 200-300 ℃ and 600 ℃, respectively, while for samples with slow cooling paths (SS path: slow heating and slow cooling; FS path: fast heating and slow cooling), there is only one mutation point around 600 ℃. The initiation positions of thermal cracking under all temperature paths are relatively similar, with intergranular crack located between particles at the edge of the sample or intercrystalline crack in the middle of feldspar or quartz aggregates. The initiation temperature of SF and FF path specimens is relatively low compared to SS and FS path specimens, and the number and size of cracks is small. The crack network structure formed by the SF path is the most complex, with the largest crack ratio and cumulative crack length; The crack network structure formed by the FF path is relatively complex, with a larger main crack size but relatively fewer secondary cracks; The FS and SS paths do not form a complex network with good connectivity. The process of thermal crack development can be divided into three stages: the development of small cracks, the joint development of main cracks and small cracks, and the connection of cracks into a network structure. The mechanism of thermal crack propagation is that the expansion and thermal conductivity between different crystals are different. The thermal stress caused by temperature gradient and the tension or shear stress caused by the inconsistent deformation of crystals form stress concentration in weak areas such as particles boundary, cleavage, and original cracks. Firstly, it causes some crystals with smaller strength or less rounded shape to crack, and when the combined stress is large, the cracks will gradually expand along the existing fine cracks. This also explains that the most main cracks of the SF and FF path specimens mainly surround some large mineral aggregates or between particles.

The study of velocimetry is important for characterizing and comprehending the effects of fluid flow, and the Particle Image Velocimetry (PIV) technique is one of the primary approaches for understanding the velocity vector field in a test section. Commercial PIV systems are expensive, with one of the main cost factors being high-speed camera equipment capable of capturing images at high frames per second (fps), rendering them impractical for many applications. This study proposes an evaluation of utilizing smartphones as image acquisition systems for PIV technique application. An experimental setup inspired by the known angular displacement of synthetic particles is proposed. A stepper motor rotates a plate containing an image of synthetic particles on its surface. The motion of the plate is captured by the smartphone camera, and the images are processed using PIVlab-MatLab® software. The use of two smartphones is assessed, with acquisition rates of either 240 fps or 960 fps and varying angular velocities. The results were satisfactory for velocities up to 0.7 m/s at an acquisition rate of 240 fps and up to 1.8 m/s at 960 fps, validating the use of smartphones as a cost-effective alternative for the PIV technique.

In this paper, a robust nonlinear dynamic controller is designed for a wind turbine with a permanent magnet synchronous generator. The wind turbine is subject to variations in all the parameters appearing in its mathematical model. Furthermore, the wind velocity is considered unavailable for direct measurement. This situation is of particular interest in practical applications, where only the nominal parameter values are known, and accurate wind velocity measurement is challenging due to perturbations caused by the turbine itself, even with appropriate sensors. The problem addressed in this work involves tracking the reference angular velocity corresponding to the wind velocity. To achieve accurate tracking, appropriate compensation of the perturbation terms resulting from parameter uncertainties and wind estimation errors is required. To address this problem, an estimator of the wind velocity is utilized, along with high–order sliding mode parameter estimators, to ensure high–performance operation of the turbine.

An experimental platform for laser-driven ion (sub-MeV) acceleration and potential applications was recently commissioned at the HiLASE laser facility. The auxiliary beam of the Bivoj laser system operating at GW peak power (~10 J in 5-10 ns) and 1-10 Hz repetition rate enabled a sta-ble production of high-current ion beams of multiple species (Al, Ti, Fe, Si, Cu, Sn). The pro-duced laser-plasma ion sources were fully characterized against the laser intensity on target (1013-1015 W/cm2) by varying the laser energy, focal spot size, and pulse duration. This al-lowed to provide accurate scaling laws of the maximum ion energy for the different target ma-terials investigated. Such experimental scaling laws are presented for the first time in the inves-tigated laser intensity range and for ns-class laser pulses, and allow to provide a qualitative in-terpretation of the laser-plasma interaction underpinning physics, thus to tune the main features of the accelerated ion beams (energy, temperature, and current). Such a detailed study was facil-itated by the large amount of data acquired at high repetition rate (1-10 Hz) provided by the Bivoj laser system. The versatility and tuneability of such high-repetition-rate laser-plasma ion sources are of po-tential interest for multidisciplinary user applications.

Cervical cancer is the most common female reproductive tract tumor and is currently the only cancer that can be prevented by vaccination. Early detection and treatment of cervical cancer can be achieved through regular screening for human papillomavirus (HPV). Therefore, in this paper, an electrochemical sensor was designed to detect HPV 16 using a dual signal amplification technique. APTES modified glassy carbon electrode to improve stability. Combining gold nanoparticles and chain amplification reactions for signal amplification purposes. The limit of detection (LOD) was 1.731×10-16 mol/L, and the detection range of this electrochemical sensor was increased in comparison to previous research, with a linear response range from 1.0×10-13 mol/L to 1.0×10-5 mol/L (R2 = 0.99232) for the target detector.In addition, the sensor showed equally good recovery in sophisticated human serum samples. It shows that it has good interference resistance and the designed biosensor can be a powerful and reliable tool for clinical disease diagnosis.

A conventionally cast CoNiFeMn0.5Cr1.5 alloy and two versions with 0.25C&amp;3.7Ta or 0.25C&amp;3.7Hf were tested in oxidation at 1000°C for 50h with thermogravimetric recording of the oxidation kinetic. In all cases the obtained mass gain curves are parabolic. Their parabolic constants are much lower than the Kp previously determined for the original alloys with an equimolar base (CoNiFeMnCr). However, the post–mortem exploitation of the oxidized samples revealed analogous oxidation features on surface and subsurface, with here too external oxide strata on surface with different Mn and Cr contents, and rather great Mn–depletion in addition to a moderate Cr–depletion, in subsurface. Globally, the oxidation behavior is significantly better than earlier observed for the equimolar version of these alloys.

We consider new insights into the origin and nature of pointer states and their role in wave function collapse in macroscopic quantum coherence. The work includes new theory of quantum coherence underpinned by turbulence, generated by a field of pointer states in the form of recirculating vortices (toroids), interconnected via a vortex cascade. Decoherence occurs when the interconnected field of vortices between pointer states is disrupted by external forces, leading to their localisation. The applicability of this work is considered in addressing unresolved questions in high temperature superconductivity and macroscopic quantum processes in biological systems. We also consider its implications for our understanding of intrinsic spin and pointer states within the standard "point source" representation of a quantum particle, which intuitively requires a more complexed description.

Nowadays, with the development of laser weapons, the primary power supply of laser weapons puts forward more and more high demand for its performance. The pulsed power supply based on conventional homopolar inductor alternator (HIA) cannot meet the requirements any more. In order to improve the power density and efficiency, this paper proposes applying the high-temperature superconducting (HTS) HIA with slotless stator core to this power supply. In this paper, the design considerations of it are presented, and the comparisons between the two power supplies are discussed. The calculation results show that the power supply based on HTS machine has much larger power density than the conventional HIA, and the efficiency is also larger than the conventional HIA. This can improve the performance of laser weapons dramatically.

Kampus Mengajar is a teaching and learning activity in schools as part of the independent campus learning policy (MBKM) initiated by Nadiem Anwar Makarim, B.A., M.B.A. as Minister of Education, Culture, Research, and Technology of the Republic of Indonesia. This article aims to find out the teaching campus, a form of direct student service in the world of education? This article is a qualitative descriptive with a literature study. The result of this article is that all work program designs that have been prepared together can be implemented well at SMP Dhaniswara Surabaya and get quite satisfactory results.

Global warming causes an alarming increase in temperature which negatively affects growth, physiology, and yield of rice. To gain some insights into the impacts of booting HT (at 42°C, 3 h for 7 days), we investigated its effect in three rice genotypes, namely, N22, KDML105 and IR64. Booting HT caused an extended phenology and lower photosynthesis and plant growth rate but an increase in chalkiness. Although, prolonged phenology from dough to physiological maturity led to longer duration of grain filling, the negative effects of its was significantly lower yield components, yield and harvest index in all rice. Among cultivars, N22 presented adapted ability to maintain leaf gas exchange and compensated vegetative part by an increase in tiller numbers resulting in less affected growth rate. It prolonged phenology that caused extended grain filling. Consequence, N22 was the lowest reduction in number of seed panicle^–1, number of filled seeds hill^–1, yield, HI as well as the lowest percentage chalkiness. KDML105 adapted to booting HT by maintaining leaf gas exchange, increasing specific leaf area and prolonging phenology. The longest extended phenology together with the maintenance of high photosynthesis during dough grain were associated with moderate yield reduction and chalkiness. However, IR64 showed dramatic reductions in photosynthesis, growth rate, and yield but highest percentage grain chalkiness. Therefore, in response to booting HT, N22, KDML105 and IR64 could be indicated as being heat tolerant, moderately heat sensitive, and heat sensitive, respectively. This can be applied for crop modelling and rice heat tolerance in breeding program.

This work reports the first nanocrystalline SnON (7.6 % Nitrogen content) n-type nanosheet Field-Effect Transistor (nFET) with transistor’s effective mobility (µeff) as high as 357 and 325 cm2/V-s at electron density (Qe) of 5×1012 cm-2 and ultra-thin body thickness (Tbody) of 7 and 5 nm, respectively. At the same Tbody and Qe, these µeff values are significantly higher than single crystalline Si, InGaAs, thin-body Si-on-Insulator (SOI), two-dimensional (2D) MoS2 and WS2. New discovery of slower µeff decay rate at high Qe than SiO2/bulk-Si universal curve was found, owing to one order of magnitude lower effective field (Eeff) by more than 10 times higher dielectric constant () in channel material, which keeps the electron wave-function away from the gate-oxide/semiconductor interface and lowers the gate-oxide surface scattering. In addition, the high µeff is also due to the overlapped large radius s-orbitals, low 0.29 mo effective mass (me*) and low polar optical phonon scattering. SnON nFETs with record-breaking µeff and quasi-2D thickness enable potential monolithic three-dimensional (3D) integrated circuit (IC) and embedded memory for 3D biological brain-mimicking structures.

Greenery-covered towers are a new generation of tall buildings characterized by substantial integration of vegetation. They aim to improve the quality of urban life by reducing air pollution, enhancing biodiversity, creating microclimates, and providing aesthetic and psychological benefits. This paper examines the innovative design approaches of greenery-covered towers, drawing on examples from different countries and contexts. It analyzes the technical, environmental, social, and economic aspects of these projects, as well as the challenges and opportunities they pose for the future of sustainable architecture. The paper concludes that greenery-covered towers should be further developed and refined to become a potential solution for addressing dense cities’ environmental and health issues.