Abstract In order to solve the problem that it is difficult to obtain the accurate trigger signal moment when using the time difference of UAV flight acoustic signals collected by acoustic sensors arranged in advance to locate the position of UAVs when they cannot be tracked by radar and are difficult to be observed by the human eye, an acoustic source localisation method with improved empirical modal decomposition (REMD) under an adaptive frequency window is proposed. Firstly, the collected UAV flight signals are smoothed and filtered, then the robust empirical modal decomposition (REMD) is used for IMF modal decomposition and spectral analysis of the collected signals, and a panning frequency window with variable bandwidth is introduced for corresponding frequency locking and extracting the IMFs; the GWO optimisation is used and the sliding metrics are set to determine the position of the panning frequency window automatically; finally, the extracted Finally, the extracted IMF components are reconstructed according to the criterion, and the trigger signal moments in the reconstructed IMF components are resolved and recorded, and the algorithm is used to calculate the difference between the reception moments of different sensors; for the traditional sound source localisation algorithms with a small detection range, which are prone to fall into the no-solution or false-solution, i.e., unable to achieve the localisation, a weighted least-squares-based Chan-Taylor algorithm is proposed for the localisation computation, and a weighted least-squares algorithm is proposed for the localisation computation, through the Inputting the sensor delay parameter and solving the linear equation system to get the target position information; finally, this paper verifies the robustness and performance of the design method with simulated and actual signals. The results show that the maximum positioning error is no more than 5% in an area with a side length of 15m in the measurement area. With the improved accuracy of time delay estimation, the positioning simulation results meet the positioning requirements even though the positioning error is further expanded when the measurement area is further expanded.

This experiment aimed to investigate the impact of malic acid (MA) and citric acid (CA) on the nutritional composition, fermentation quality, rumen degradation rate, and microbial diversity of a mixture of apple pomace and corn protein powder during ensiling. The experiment used apple pomace and corn protein powder as raw materials, with four groups: control group (CON), malic acid treatment group (MA, 10g/kg), citric acid treatment group (CA, 10g/kg), and citric acid + malic acid treatment group (MA, 10g/kg + CA, 10g/kg), subjected to mixed ensiling for 60 days. The results indicated: (1) Compared to the CON group, the crude protein content significantly increased in the MA, CA, and MA+CA groups (p < 0.05), with the highest content observed in the MA+CA group. The addition of MA and CA effectively reduced the water-soluble carbohydrate (WSC) content (p < 0.05). Simultaneously, the CA group showed a decreasing trend in NDFom and hemicellulose content (p = 0.08; p = 0.09). (2) Compared to the CON group, the pH significantly decreased in the MA, CA, and MA+CA groups (p < 0.01), and the three treatment groups exhibited a significant increase in lactic acid and acetic acid content (p < 0.01). The quantity of lactic acid bacteria increased significantly (p < 0.01), with the MA+CA group showing a more significant increase than the MA and CA groups (p < 0.05). (3) Compared to the CON group, the in situ dry matter disappearance (ISDMD) significantly increased in the MA, CA, and MA+CA groups (p < 0.05). All three treatment groups showed highly significant differences in in situ crude protein disappearance (ISCPD) compared to the CON group (p < 0.01). (4) Good's Coverage for all experimental groups was greater than 0.99, meeting the conditions for subsequent sequencing. Compared to the CON group, the Shannon index significantly increased in the CA group (P < 0.01), and the Simpson index increased significantly in the MA group (p < 0.05). However, there was no significant difference in the Chao index among the three treatment groups and the CON group (p > 0.05). At the genus level, the abundance of Lentilactobacillus in the MA, CA, and MA+CA groups was significantly higher than in the control group (p < 0.05). PICRUSt prediction results indicated that the metabolic functional microbial groups in the CA and MA treatment groups were significantly higher than in the CON group (p < 0.05), suggesting that the addition of MA or CA could reduce the loss of nutritional components such as protein and carbohydrates in mixed ensilage. In conclusion, the addition of malic acid and citric acid to a mixture of apple pomace and corn protein powder during ensiling reduces nutritional losses, improves fermentation quality and rumen degradation rate, enhances the diversity of the microbial community in ensiled feed, and improves microbial structure. The combined addition of malic acid and citric acid demonstrates a superior effect.

Global agriculture has been forced to increase food production to feed the growing human population, while confronting various environmental obstacles such as global warming, resistance to pathogens, and constraints on arable land caused by soil salinity, drought, rising sea level, saltwater intrusion, and urbanization. Regarding abiotic stresses, salinity is a worldwide problem for agricultural production. Many efforts, therefore, have been made to cope with the environmental challenges, however, the progress of salinization, which is mainly caused and accelerated by anthropogenic activities, is likely faster than our progress in finding ways to deal with this problem. In addition, drought represents a global threat to the production of major crops. In addition, pests and pathogens cause significant crop losses and diminish global food security. Among the various strategies that have been investigated and applied in plant science, antimicrobial peptides derived from plants have caught widespread attention from scientists since these peptides exhibit beneficial biological activities. In agricultural science, there have been reports on the roles of antimicrobial peptides with active properties against biotic and abiotic stresses. Non-specific plant lipid transfer proteins, thionins, systemins, defensins, cyclotides, and heveins-like antimicrobial peptides are common antimicrobial peptides that have been found to be involved in the defense system against fungi and insect pests. Based on their potential ability to protect crops from pests, bacteria, and pathogenic fungi, the use of antimicrobial peptide genes in creating transgenic plants has been largely conducted during the last decades, and these studies have obtained positive results against the growth of fungi and bacteria. This review will focus on the latest progress in studies of antimicrobial peptides related to biotic and abiotic stress tolerance in plants. We will also update the current progress in the development of antimicrobial peptide-based transgenic crops.

With the rapid development of artificial intelligence, machine learning is gradually becoming popular in predictions in all walks of life. In meteorology, It is gradually competing with traditional climate predictions dominated by physical models. This survey aims to consolidate the current understanding of Machine Learning (ML) applications in weather and climate prediction—a field of growing importance across multiple sectors including agriculture and disaster management. Building upon an exhaustive review of more than 20 methods highlighted in existing literature, this survey pinpointed eight techniques that show particular promise for improving the accuracy of both short-term weather and medium-to-long-term climate forecasts. According to the survey, while ML demonstrates significant capabilities in short-term weather prediction, its application in medium-to-long-term climate forecasting remains limited, constrained by factors such as intricate climate variables and data limitations. Current literature tends to focus narrowly on either short-term weather or medium-to-long-term climate forecasting, often neglecting the relationship between the two, as well as general neglect of modelling structure and recent advances. By providing an integrated analysis of models spanning different time scales, this survey aims to bridge these gaps, thereby serving as a meaningful guide for future interdisciplinary research in this rapidly evolving field.

Prosthetic attack is a problem that must be prevented in the current finger vein recognition application. To solve this problem, a finger vein living detection system was established in this article. The system first captures short-term static finger vein video by uniform near-infrared lighting, segments the veins by Gabor filters with current removing, calculates the multi-Scale spatial-Temporal maps(MSTmap) from the selected vein blocks, and trains the MSTmaps in the proposed Light-ViT network for the liveness detection. The MS maps are used to extract the coarse feature and Light-ViT is used to refine the liveness feature and predict the liveness result. Light-ViT, featuring an enhanced L-ViT backbone as its core, is constructed by interleaving multiple MN blocks and L-ViT blocks. This architecture effectively balances the learning of local image features, controls network parameter complexity, and substantially improves the accuracy of liveness detection. The accuracy of the Light-ViT network is verified to be 99.63% on the self-made living / prosthetic finger vein video dataset. This proposed system can also be directly applied to the finger vein recognition terminal after the model lightweighting.

In this study, a composite film was developed for electrochemical sensing of tryptophan (Trp). Porous reduced graphene oxide (PrGO) was utilized as the electron transfer layer, and a C-undecylcalix[4] resorcinarene Langmuir-Blodgett (CUCR-LB) film served as the molecular recognition layer. Atomic force microscopy (AFM), transmission electron microscopy (TEM), Raman spectroscopy, scanning electron microscopy (SEM), and electrochemical experiments were employed to analyze the characteristics of the CUCR-LB/PrGO composite film. The electrochemical behavior of Trp on the CUCR-LB/PrGO composite film was investigated, revealing a linear response range of Trp was 1.0×10-7 to 3.0×10-5 mol L-1 and a detection limit of 3.0×10-8 mol L-1. Furthermore, the developed electroanalytical method successfully determined Trp content in an amino acid injection samples. This study not only introduces a rapid and reliable electrochemical method for determination of Trp but also presents a new strategy for constructing high-performance electrochemical sensing platforms.

Recently, NOAA has included GNSS (Global Navigation Satellite System) Radio Occultation (RO) data as one of the crucial long-term observables for weather and climate applications. To include more GNSS RO data in the numerical weather prediction system, the NOAA Commercial Weather Data Pilot program (CWDP) started to explore the commercial RO data available on the market. After two rounds of pilot studies, the CDWP decided to award the first Indefinite Delivery Indefinite Quantity (IDIQ) contract to GeoOptics and Spire Incs. in 2020. This study examines the quality of Spire data products for weather and climate applications. Spire RO data are collected from commercial CubeSats through careful comparison with the data from Formosa Satellite Mission 7–Constellation Observing System for Meteorology, Ionosphere, and Climate-2 (COSMIC-2), ERA-5, and high-quality radiosonde data. The results demonstrated that although with lower Signal-Noise-Ratio (SNR) in general, the pattern of the lowest penetration height for Spire is similar to those for COSMIC-2. The Spire and COSMIC-2 penetrate heights are between 0.6 and 0.8 km altitude at the tropical oceans. Although using different GNSS RO receivers, the precision of Spire STRASP receivers is of the same quality as those of COSMIC-2 Global Positioning System - GPS, GALILEO, and GLObal NAvigation Satellite System – GLONASS (TGRS) receivers. The retrieval accuracy from Spire is very compatible with those from COSMIC-2. We validated Spire temperature and water vapor profiles by comparing them with collocated radiosonde data. Generally, over the height region between 8 km and 16.5 km, the Spire temperature profiles match those from RS41 RAOB very well with temperature biases &lt; 0.02 K. Over the height range from 17.8 to 26.4 km, the temperature differences are ~-0.034 K with RS41 RAOB being warmer. We also estimated the error covariance matrix for Spire, COSMIC-2, and KOMPSAT-5. Results showed that the COSMIC-2 estimated error covariance values are slightly more significant over the oceans at the mid-latitudes (45oN-30oN and 30oS-45oS), which may also be owing to COSMIC-2 SNR being lower at those latitudinal zones.

Bone Morphogenetic Proteins (BMPs) are a group of structurally and functionally related signaling molecules that comprise a subfamily, belonging to the TGF-β superfamily. Most BMPs play roles in the regulation of embryonic development, stem cell differentiation, tumor growth and some cardiovascular and cerebrovascular diseases. Although evidences are emerging for the antiviral immunity of a few BMPs, more BMPs are needed to determine whether this function is universal. Here we identified the zebrafish bmp4 ortholog, whose expression is up-regulated by challenge with virus or its mimic poly(I:C). Overexpression of bmp4 in EPC cells significantly decreased the viral titer of GCRV-infected cells. Moreover, compared to wild type zebrafish, viral load and mortality were significantly increased in both larvae and adults of bmp4-/- mutant zebrafish infected with GCRV virus. We further demonstrated that Bmp4 promotes the phosphorylation of Tbk1 and Irf3 through p38 MAPK pathway, thereby inducing the production of type I IFNs in response to virus infection. These data suggest that Bmp4 runs an important role in the host defense against virus infection. Our study expands the understanding of BMP protein functions and opens up new targets for the control of viral infection.

The green peach aphid, Myzus persicae (Sulzer) (Hemiptera: Aphididae), is an economically important pest of crops worldwide. A M. persicae (SEF-R) population from a cabbage field in southeastern China was tested for susceptibilities to 13 insecticides. Compared with the susceptible clone (FFJ-S), extremely high and high-resistance to beta-cypermethrin (324-fold) and imidacloprid (106.9-fold) were detected in SEF-R. More importantly, this is the first report of resistance in field M. persicae population to sulfoxaflor, flupyradifurone, pymetrozine, spirotetramat, flonicamid, and broflanilide in China. The resistance factor decayed to a low level to sulfoxaflor and pymetrozine after 15 generations without any selection pressure. The resistance-related mutations (R81T and kdr) were detected in SEF, conferring target-site resistance to neonicotinoids and pyrethroids, respectively. Biochemistry bioassays confirmed the involvement of monooxygenase enzyme, carboxylesterase, superoxide dismutase and peroxidase in multi-insecticide resistance mechanism. The overexpression of P450s, esterases, and a UDP-glycosyltransferase, might be responsible for the multi-insecticide resistance in SEF-R. The knockdown of CYP6CY3 in SEF-R increased its susceptibility to imidacloprid, thiacloprid, and thiamethoxam, which verified that P450s play vital roles in neonicotinoid metabolism. This study will be helpful for chemical control, as well as for resistance monitoring and management of GPA, in China.

: The silicon single crystals for semiconductor application is usually grown by Czochralski (CZ) method. This paper researches 300mm silicon Czochralski (CZ) crystal growth with CUSP magnetic field for IGBTs substrate application. The different positions of Zero-Gauss plane (ZGP) under CUSP magnetic field are simulated and compared to numerical analysis, investigated melt convection, melt flow velocity near to quartz crucible wall, diffusion boundary layer and effect of initial oxygen concentration in the silicon crystal, and the shape of solid/liquid interface was discussed. The results show that the change of the ZGP of the CMF mainly affects the convection in the melt, which leads to the difference of the thickness of the boundary layer near to the wall of the quartz crucible, and was found to be the key to reduce the oxygen dissolution from the crucible wall and oxygen diffuse into the crystal, along with the differences in the shape of the crystal-melt interface. In addition, we have carried out actual industrial single crystal production under the three configurations. The results show that the experimental data of oxygen content and shape of the crystal-melt interfaces in silicon crystal are consistent with the numerical results.

Remote sensing (RS) technology has significantly contributed to geological exploration and mineral resource assessment. However, its effective application in vegetated areas encounters various challenges. This paper aims to provide a comprehensive overview of the challenges and opportunities associated with RS-based lithological identification in vegetated regions. The article begins by introducing the sources and processing methods of RS data, which serve as the foundation for subsequent analysis. Moreover, it highlights the techniques and methodologies employed for lithological classification in vegetated areas. Notably, hyperspectral RS and Synthetic Aperture Radar (SAR) have emerged as prominent tools in lithological identification. In addition, this paper addresses the limitations inherent in RS technology, including issues related to vegetation cover and terrain effects, which significantly impact accurate lithological mapping. To propel further advancements in the field, the paper proposes promising avenues for future research and development. These include the integration of multi-source data to enhance classification accuracy and the exploration of novel RS technologies and algorithms. In summary, this paper presents valuable insights and recommendations for advancing the study of RS-based lithological identification in vegetated areas.

The microenvironment of most tumors is complex, comprising numerous aspects of immunosuppression. Several studies have indicated that the adrenergic system is vital for controlling immunological responses. In the context of tumor microenvironment, Nor-Adrenaline (NA) is poured-in by innervating nerves and tumor tissues itself. The receptors for nor-adrenaline are present on the surface of cancer and immune cells and are often involved in activation of pro-tumoral signaling pathways. β2-adrenergic receptor (β2-AR) is an emerging class of receptors that are capable of modulating the functioning of immune cells. β2-AR is reported to activate the regulatory immune cells and inhibit the effector immune cells. Blocking β2-AR increases activation, proliferation and cytokine release of T lymphocytes. Moreover β2-AR deficiency during metabolic reprograming of T cells increases mitochondrial membrane potential and biogenesis. In the view of available research data, immunosuppressive role of β2-AR in T cells presents it a targetable checkpoint in CAR-T cell therapies. In this review, we have abridged contemporary knowledge about adrenergic stress mediated β2-AR activation on T lymphocytes inside tumor milieu.

The ultrasonic vibration assisted pressing process can improve the fluidity, the uneven distribution of density and particle size of WC-Co powder. However, the microscopic mechanism of ultrasonic vibration on the powder remains unclear. In this paper, WC and Co particles are simulated by three-dimensional spherical models of two particle sizes with the aide of the secondary development of Python. At the same time, the forming process of powder at mesoscale is simulated in the virtue of the finite element analysis software ABAQUS. The influence of vibration amplitude on the fluidity, the filling density and the stress distribution of WC-Co powder is investigated when the ultrasonic vibration is applied to the conventional pressing process. From simulation results, the ultrasonic vibration amplitude has great influences on the density of the compact. With the increase of the ultrasonic amplitude, the compact density also increases gradually. At the initial stage of the compaction, the particles move violently under the action of ultrasonic vibration, the fluidity is obviously enhanced, the arch bridge effect between particles is destroyed, the fine particles quickly fill the pores between the large particles, which increase the density, and the residual stress in the billet decreases after the compaction. From the experimental results, the size distribution of the billet is more uniform, the elastic aftereffect is reduced, the dimensional instability is improved, and the density curves obtained by experiment and simulation are within a reasonable error range.

In this paper, a quick and efficient method for preparation of scopolamine hydrobromide with high purity was introduced, named as magnetic field induced crystallization. Based on the solubility difference between scopolamine and scopolamine hydrobromide, salifying crystallization was selected and then treated with the synergistic effect of magnetic field to achieve the aim of scopolamine purification. The effects of crystallization solvents and magnetic field intensity on the crystallization process of scopolamine hydrobromide, as well as the influnence of magnetic field on the crystal growth direction were investigated. The results revealed that after treatment under magnetic field, the shortened induction time (25.64%-75.46%), the increased purity of crystals (0.95%-2.92%) and the improved recovery rate (4.51%-10.78%) were achieved. Furthermore, we also found that magnetic field could destroy the hydrogen bond in the solution, and change the physical properties of the mother liquid, so as to promote the nucleation formation and crystal growth. The above experiments suggested that the external magnetic field has the potential to be a feasible method for scopolamine preparation.

Influenced by the quasi-stationary Mei-yu front and the development of mesoscale low vortices on the Mei-yu front, a torrential rain event occurred in Suzhou on July 6, 2020. The 24-hour rainfall recorded by the automatic station exceeded 200 millimeters, with the highest hourly intensity surpassing 70 millimeters, accompanied by thunderstorms and strong winds. This heavy precipitation process was characterized by suddenness, extremity, long duration, high precipitation efficiency, and backward propagation. Using various data sources such as the European ERA5 reanalysis data, ground-based automatic stations, sounding, Doppler weather radar, and wind profile radar, this paper analyzed in detail the circulation characteristics and radar echo structures of this torrential rain event, and further studied the triggering, feature evolution, and maintenance mechanisms of the heavy precipitation.The results show: (1) The continuously strengthening low-level jet stream propagates downward forming an ultra-low-level jet stream. Heavy precipitation is located on the left front side of the jet exit area, where strong convergence and lifting in the boundary layer overlap with the ascending branch of the secondary circulation above the shear line, resulting in heavy precipitation. (2) A supercell storm with intense precipitation produced this heavy rainfall event, characterized by a low centroid of strong echo; echo-free vault, bounded weak echo region, and other supercell structural features. During this event, the high reflectivity factor areas corresponded to high KDP value areas, indicating a large amount of liquid water content. Vertically, the KDP column can track the rainwater mixing ratio well, and its location corresponds to the vicinity of the short-term heavy precipitation occurrence. The high KDP value area mainly consists of numerous precipitation particles, and the vertical vortex wind field structure causes rapid growth of precipitation particles through continuous rolling. Furthermore, it can be found through correlation coefficients (CC) that there are always high-value areas for CC since they correspond to areas of intense precipitation. (3) Continuous triggering of mesoscale convective cloud clusters on the east-west ground convergence line leads to new development and forms a "train effect." Strong frontogenesis in both horizontal and vertical directions triggers and sustains this heavy precipitation event. The significant increase in liquid water and water vapor density has indicative significance for the occurrence of heavy precipitation.

Two-dimensional MXene synthesized from MAX phase ceramic has the good electrical conductivity, promising to be used as electrodes. In this study, Nb4C3Tx MXene and low-entropy (Nb0.8Ti0.05V0.05Zr0.05Ta0.05)4C3Tx MXene were prepared by etching Nb4AlC3 and (Nb0.8Ti0.05V0.05Zr0.05Ta0.05)4AlC3 ceramics in the HF acid at 60 oC. By investigating the electrochemical properties of lithium batteries, it was found that the Nb4C3Tx and (Nb0.8Ti0.05V0.05Zr0.05Ta0.05)4C3Tx could provide the specific capacities of 163.7 mAh·g-1 and 130 mAh·g-1 after 50 cycles at a current density of 0.1 A·g-1, respectively, and maintain the coulombic efficiency close to 100%, good for the utilization of electrodes in the lithium batteries.

With the development of health service, animal husbandry, aquaculture and chemical industry, more and more pollutants are discharged into the water environment, including antibiotics and heavy metal ions. These hazard substances pose a great threat to environment safety and human health. As two kinds of new green solvents, ionic liquids (ILs) and deep eutectic solvents (DESs) are widely used in various fields including separation and environmental engineering, which are attracting huge attention from academia and industry. In this study, the optimal ionic liquid and deep eutectic solvent were selected and their complex with β-cyclodextrin (β-CD) were firstly prepared by simple and effective inclusion way. After necessary characterization and analysis, two kinds of complex were applied to prepare a special sorbent disc with two different sides by adding diluent (excipient) and pressing under 5~15 MPa. As the result, the IL and DES could be stably immobilized on the disc and play the key role in selective adsorption for targets. Besides that, the experiments of different hazardous substances achieved the expected results. Based on this study, the complex disc showed a lot of merits in the separation performance, easy preparation and use, simple operation, and good stability. It was believed to be a useful tool for water purification and detection.

The leaves of Ligustrum robustum have been applied as Ku-Ding-Cha, a functional tea to clear heat and remove toxins; and served as a folk medicine to deal with diabetes, obesity, and hypertension. Trans-p-hydroxycinnamic acid and its esters, which were isolated from the leaves of L. robustum, might be a new resource to prevent diabetes and its complications because of their strong -glucosidase and fatty acid synthase (FAS) inhibitory activities and antioxidant effect. However, the quantitative analytical method for trans-p-hydroxycinnamic acid and its esters in the leaves of L. robustum hasn’t been reported so far. In addition, it was difficult and troublesome to analyze no less than 34 trans-p-hydroxycinnamic acid esters by usual HPLC. Therefore, a new HPLC-UV method using hydrolyzation with sodium hydroxide for quantitation of trans-p-hydroxycinnamic acid and its esters in the leaves of L. robustum was developed in the present study. The optimal hydrolyzation conditions were as follows: 1 mL sodium hydroxide aqueous solution (1 M) was added into 1 mL the extract of L. robustum and incubated at 80 °C for 2 h , and then 1 mL hydrochloride (1 M) solution was added. HPLC analysis was performed in reverse phase mode using a C-18 column, eluting with methanol-0.1% acetic acid aqueous solution (40:60, v/v) in isocratic mode at a flow rate of 1.0 mL/min, and detecting at 310 nm. The analytical method was simple and rapid, which simplified greatly the analytical process. The method was validated in terms of linearity, limit of detection (LOD), limit of quantification (LOQ), precision, and accuracy. High linearity was demonstrated with correlation coefficient of 1.000 for trans-p-hydroxycinnamic acid. The LOD and LOQ values were 1.55 and 4.69 μg/mL, respectively. The relative standard deviations (RSD) of intra-day and inter-day variabilities for trans-p-hydroxycinnamic acid were less than 2%. The percentage recovery of trans-p-hydroxycinnamic acid was 101.2% ± 0.8%. Finally, the proposed method was applied successfully to the determination and comparison of the contents of trans-p-hydroxycinnamic acid and its esters in various extracts of the leaves of L. robustum. The 60%-70% ethanol extracts of L. robustum showed the highest contents of free trans-p-hydroxycinnamic acid (3.96-3.99 mg/g), and the 50%-80% ethanol extracts of L. robustum displayed the highest contents of trans-p-hydroxycinnamic acid esters (202.6-210.6 mg/g). The method can be applied also to the quality control of the products of L. robustum.

On the aero-engine combustor liner, a phenomenon of overheating resembling a hot spot exists, accompanied by a preferential peeling of the YSZ thermal barrier coating that will negatively affect the service life of the component. The temperature gradient of the hot spot may affect the YSZ fracture pattern.In this paper, the morphological and property changes of YSZ sintering is investigated experimentally, and a coupled analysis of the YSZ Crack Propagation Mode under the hot spot is performed using ABAQUS. The results show that the pore fractal size D of YSZ increases by 15%. Inside the hot spot region, the coating has a shear stress of 75MPa. By inserting Cohesive units globally in the model to simulate the random crack initiation and propagation, unlike the thinning of YSZ layered peeling caused by uniform superheating, hot spot will cause the crack initiation at the tip of the pores inside the coating and the oblique propagation, eventually forming an oblique crack connection through the pores. When the temperature gradient reaches 30K/mm, the crack propagation is 40% greater than in a uniform temperature field; consequently, the YSZ in the hot spot boundary region with a greater temperature gradient results in more severe bulk peeling.

This paper mainly used database technology, machine learning, thermodynamic calculation, experimental verification, etc., on integrated computational materials engineering. The interaction between different alloying elements and the strengthening effect of precipitated phases are investigated mainly for martensitic ageing steels. Modelling and parameter optimization were performed by machine learning, and the highest prediction accuracy was 98.58%. Investigated the influence of composition fluctuation on performance and correlation tests to analyze the influence of elements from multiple perspectives. Furthermore, screen out the three-component composition process parameters with composition and performance with high contrast. Thermodynamic calculations studied the effect of alloying element content on the nano-precipitation phase, Laves phase, and austenite in the material. The heat treatment process parameters of the new steel grade were also developed based on the phase diagram. A new type of martensitic ageing steel was prepared by selected vacuum arc melting. The sample with the highest overall mechanical properties had a yield strength of 1887 MPa, a tensile strength of 1907 MPa, and a hardness of 58 HRC. The sample with the highest plasticity had an elongation of 7.8%. The machine learning process for the accelerated design of new ultra-high tensile steels was found to be generalizable and reliable.

Effective household and individual disaster preparedness can minimize physical harm and property damage during catastrophic events. To assess the risk and vulnerability of affected areas, it is crucial for relief agencies to understand the level of public preparedness. Traditionally, government agencies have employed nationwide random telephone surveys to gauge the public’s attitudes and actions towards disaster preparedness. However, these surveys may lack generalizability in certain affected locations due to low response rates or areas not covered by the survey. To address this issue and enhance the comprehensiveness of disaster preparedness assessments, we develop a framework that seamlessly integrates machine learning and simulation. Our approach leverages machine learning algorithms to establish relationships between public attitudes towards disaster preparedness and demographic characteristics. Using Monte Carlo simulation, we generate datasets that incorporate demographic information of the affected location based on government-provided demographic distribution data. The generated dataset is then input into the machine learning model to predict the disaster preparedness attitudes of the affected population. We demonstrate the effectiveness of our framework by applying it to Miami-Dade County, where it accurately predicts the level of disaster preparedness. With this innovative approach, relief agencies can have a clearer and more comprehensive understanding of public disaster preparedness.

The heterogeneous structure implies that a few nodes may be crucial in maintaining network structural and functional properties. Identifying these crucial nodes correctly and quickly is a primary issue as contemporarily may face the mushrooming of large-scale datasets. Besides, the ‘weight issue’ is always ignored in this field which edge weight may play a positive/negative role in contributing to the node importance in different weighted networks. This paper provides a novel algorithm, Weighted Expectation Algorithm (WEA), which aims to ensure accuracy and speed of computation by taking advantage of dynamic programming to better handle the task of large-scale networks. Additionally, the weight issue that edge weights may contribute differently is addressed by a simply quantitative definition. Two standard experiments show WEA can maintain the network structure in connectivity well (by the lowest average robustness 0.192) and identify the node importance better in the spreading function test of spreading dynamics (by the highest average Kendall’s tau-b 0.678). In addition, the time complexities of different algo-rithms are evaluated, and their time-consuming are tested, proving that WEA consumes a rela-tively short time.

The current study aimed to investigate the antitumor effects and potent mechanism of cytokine-induced killer (CIK) cells combined with irreversible electroporation (IRE) via an in vitro function assay in an in vivo Panc02 cell–bearing mouse model. We established an in vitro culture assay for CIK cells and determined the proportions of different peripheral lymphocytes. The antitumor effect of the combination of IRE and CIK cells in a Panc02 pancreatic-cancer (PC) subcutaneous-xenograft model was investigated; tumor size and mouse survival rates were recorded. We used flow cytometry (FCM) to analyze the proportion of intratumoral lymphocytes, the expression of chemokine receptors, and the proliferative activity of CIK cells. The proportion of cells that were positive for clusters of differentiation 3 and 8 (CD3+CD8+) and the proportion of CD3+CD56+ cells were both significantly increased after 21 days of in vitro culture. Combined IRE/CIK cell treatment significantly inhibited tumor growth and increased the survival rate of Panc02 cell–bearing mice. Furthermore, infiltration of lymphocytes into tumor tissue was significantly increased by this combination therapy compared with the untreated group or monotherapy group. In addition, IRE significantly enhanced the expression of chemokine receptors elicited by, and the proliferative activity of, CIK cells. In conclusion, IRE combined with CIK cells showed superior antitumor efficacy in a PC subcutaneous-xenograft model, which we attributed to the promotion of lymphocytic infiltration, as well as to upregulation of chemokine receptor expression and of regulators of CIK cell proliferation.

Under the goal of carbon peak and carbon neutrality, the carbon emission reduction of the automobile industry has attracted more and more attention in recent years. Electric vehicle has the dual attributes of power load and energy storage unit. With the increase of the number of electric vehicles, reducing carbon emissions through the collaborative interaction between electric vehicle and power network will become an important way to control carbon emissions in the automotive field. In this study, an optimization model of emission reduction benefits based on integrated development of electric vehicle and power grid is proposed, which explores the best technical way of synergy between power grid and electric vehicle, achieves the best carbon reduction effect and provides a model basis for large-scale demonstration application. Numerical simulations based on the real case in Beijing are conducted to validate the effectiveness of the proposed method.

Given that 3-Phosphoinositide-dependent kinase 1 (PDK1) plays a crucial role in malignant biological behaviors of a wide-range of cancers, we further review the influence of PDK1 in breast cancer (BC). First, we describe the power of PDK1 in cellular behaviors and extensively demonstrate the interacting networks of PDK1 via PI3K-dependent/ PI3K-independent pathway. Then we enlighten the roles of PDK1 in carcinogenesis, growth and survival, metastasis, and chemoresistance in BC cells. More important, we sort the current preclinical or clinical trials of PDK1 targeted therapy in BC and find that even though at present no selective PDK1 inhibitor is available for BC therapy, but the combination trials of PDK1 targeted therapy and other agents have demonstrated some benefit. Thus, there is increasing anticipations that PDK1 targeted therapy will have its space in future therapeutic concepts of BC, and we hope to feature PDK1 in BC to the clinic and bring the new promising to patients for targeted therapies.

Two types of trenches cross-section in conventional vertical and brand new reverse-V-shape have fabricated on SCD substrate by micro-jet water-assist laser, the epitaxial lateral overgrowth technique has applied by microwave plasma chemical vapor deposition system in forming multiple micrometer-size channels. Raman and SEM techniques have applied in analyze both types growth layer characterization. Optical microscope has used to test microchannels hollowness. As a result, with the brand new reverse-V-shape trench, epitaxial lateral overgrowth layer reaches higher SCD surface morphology and crystal quality.

The epidemic of Coronavirus Disease 2019 (Covid-19) has brought many changes to people's life. This study aims to analysis Chinese people's psychological change and life after quarantining Wuhan and explore the influencing factors. Based on data from a web-survey after quarantining Wuhan (N=3268), the principal-component-analysis (PCA), multiple-linear-regression (MLR), propensity-score-matching (PSM) were used to explore the psychological change of people in China and the influencing factors. 83.3% of the respondents said that the impact of the epidemic on their life had increased after quarantining Wuhan. A considerable proportion of people's anxiety increased, being reflected in negative emotion, behavioral response and physiological response. The proportion of people who said their anxiety had increased in Wuhan was higher than that in other regions (p <0.05). The anxiety of people who were in medical isolation increased less than those who were not (p <0.05). All three aspects of people’s anxiety were positively related with time of medical isolation and degree of the attention on the epidemic (p＜0.05) except the effect of attention degree on the physiological response (p＝0.06). The measure of medical isolation at home should be advocated. Yet people should reduce the concern for the epidemic while paying attention to self-protection.

The fluid seepage in local-saturated zone of subgrade promotes the migration of fine particles in the filler, resulting in the change of pore structure and morphology of the filler and the deformation of solid skeleton, which affects the fluid seepage characteristics. Repeatedly, the muddy interlayer, mud pumping and other diseases are finally formed. Based on the theory of two-phase seepage, the theory of porous media seepage, and the principle of effective stress in porous media, a two-phase fluid-solid coupling mathematical model in local-saturated zone of subgrade considering the effect of fine particles migration is established. The mathematical model is numerically calculated with the software COMSOL Multiphysics○R, the two-phase seepage characteristics and the deformation characteristics of the solid skeleton in local-saturated zone of the subgrade are studied. The research results show that due to the continuous erosion and migration of fine particles in local-saturated zone of the subgrade, the volume fraction of fine particles first increases then decreases and finally becomes stable with the increase of time. And the volume fraction of fine particles for the upper part of the subgrade is larger than that for the lower part of the subgrade. The porosity, the velocity of fluid, the velocity of fine particles, and the permeability show a trend of increasing first and then stabilizing with time; the pore water pressure has no significant changes with time. The vertical displacement increase first and then decrease slightly with the increase of time, and finally tend to be stable. For a filler with a larger initial volume fraction of fine particles, the maximum value of the volume fraction of fine particles caused by fluid seepage is larger, and the time required to reach the maximum value is shorter. It can be concluded that in actual engineering, the volume fraction of fine particles in the subgrade filler should be minimized on the premise that the filler gradation meets the requirements of the specification.

In-situ grown C_0.3N_0.7Ti and SiC, which derived from non-oxide additives Ti₃SiC₂, are proposed to densify silicon nitride (Si₃N₄) ceramics with enhanced mechanical performance. Remarkable increase of density from 79.20% to 95.48% could be achieved for Si₃N₄ ceramics with 5vol% Ti₃SiC₂. The capillarity of decomposed Si from Ti₃SiC₂, and in-situ reaction between nonstoichiometric TiC_x and Si₃N₄ were believed to be responsible for densification of Si₃N₄ ceramics. An obvious enhancement of flexural strength and fracture toughness for Ti₃SiC₂ doped Si₃N₄ ceramics was observed. The maximum flexural strength of 795 MPa for Si₃N₄ composites with 5vol% Ti₃SiC₂ and maximum fracture toughness of 6.97 MPa^.m^1/2 for Si₃N₄ composites with 20vol% Ti₃SiC₂ are achieved when mixed powders are hot-press sintered at 1700℃. Pull out of elongated Si₃N₄ grains, crack bridging, crack branching and crack deflection were demonstrated to dominate enhance fracture toughness of Si₃N₄ composites.

The separation and enrichment can be targeted to enrich the rare and precious metals in fly ash and reduce the cost of leaching and recovering of fly ash. Regarding their different properties, the single-component separation was used to obtain uncompleted burned carbon, glass microbeads, minerals, and other characteristic components from the ash. Also, the mineral composition of each component was analyzed by electron microscopy. The metal minerals were mainly concentrated in the mineral components. Besides, the electron probe micro-analysis shows that the Pt content in the minerals of fly ash was significantly correlated with the metal contents of Ni and Cu. After the obtainment of the characteristics of fly ash metal enrichment, the heavy minerals with Cu, Ni, Pt, Pd, and other target metal elements were enriched by gravity separation and flotation. The enrichment coefficients of Cu, Ni, Pt, and Pd were 1.45, 1.33, 1.90 and 1.60, respectively, and the recovery rates were 77%, 81%, 97% and 88% respectively. Since the yield of heavy minerals obtained by separation was 62.24%, it indicated the physical separation method could significantly reduce the cost of leaching and recovering of fly ash metal resources.

Globally, public acceptance of waste-to-energy (WtE) incinerators is a crucial factor in implementing national waste-to-energy policies. This study adds to the literature on anti-incinerator sentiment by drawing upon an extended psychological-emotional model that integrates place-, trust-, and fairness-based pathways. A total of 338 residents in the Asuwei area in North Beijing completed a survey on a proposal to construct a WtE incinerator in the vicinity. Hierarchical regression analyses indicate that place attachment positively enhances anti-incinerator sentiment through direct effects, as well as through moderation and mediation effects between risk perception and opposing willingness. Further, institutional trust negatively moderates the impact of perceived risk on anti-incinerator sentiment, in addition to directly reducing perceived risk. Trust also influences anti-incinerator sentiment via risk perception, attesting to the effectiveness of a casual model of trust. Likewise, fairness perception acts as another determinant of opposing sentiment, similar to trust. We further reveal that procedural fairness plays a more significant role in predicting anti-incinerator sentiment than does distributional fairness. These findings demonstrate the importance of using a range of instrumental and more affective strategies to promote social acceptance of renewable energy infrastructure.

Abstract: Tumor-targeting and blood-brain barrier (BBB)-penetrating are highly desirable for the treatment of glioma. In this study, we developed Pep-1&borneol-bifunctionalized carmustin-loaded micelles (Pep-1/Bor/CMS-M) capable of targeting to IL-13 receptor-overexpressed glioma and penetrating the brain microvascular endothelial cells-associated physiologic barriers. Pep-1/Bor/CMS-M were nearly spherical particles with a dimeter of 32.6 ± 1.1 nm and zeta potential of -21.3 ± 3.1 mV. Carmustine (CMS) released from Pep-1/Bor/CMS-M in pH 7.4 was significantly faster than in acidic environments. In human glioma BT325 cellular studies, Pep-1/Bor/CMS-M remarkably increased the cytotoxicity, notably improved the internalization and effectively induced the cell apoptosis. Likewise, in human brain microvascular endothelial cells (HBMEC) cells, Pep-1/Bor/CMS-M obviously promoted the cellular uptake, rapidly decreased the transepithelial electrical resistance (TEER) and thereby of enhancing the ability of penetration. In orthotopic Luc-BT325 glioma tumor-bearing nude mouse models, the stronger fluorescence signal and longer retention were observed in brain tissues compared with other controls, after single administration of DiD-labelled Pep-1/Bor/M (DiD/Pep-1/Bor/M). Importantly, Pep-1/Bor/CMS-M displayed the strongest inhibition of tumor growth, the longest survival period and low systemic toxicity in treating orthotopic glioma tumor-bearing nude mice. Simultaneous functionalization of Pep-1 and borneol offers a novel strategy for designing CMS-based nanomedicine and precisely treating glioma.

Satellite-based monitoring can retrieve ground-level PM_2.5 concentrations with higher-resolution and continuous spatial coverage to assist in making management strategies and estimating health exposures. The Sichuan Basin has a complex terrain and several city clusters that differ from other regions in China: it has an enclosed air basin with a unique planetary boundary layer dynamic which accumulates air pollution. The spatiotemporal distribution of 1-km resolution Aerosol Optical Depth (AOD) in the Sichuan Basin was retrieved using the improved dark pixel method and Moderate Resolution Imaging Spectroradiometer (MODIS) data in this study. The retrieved seasonal AOD reached its highest values in spring and had the lowest values in autumn. The higher correlation (r = 0.84, N = 171) between the ground-based Lidar AOD and 1-km resolution MODIS AOD indicated that the high-resolution MODIS AOD could be used to retrieve the ground-level PM_2.5 concentration. The Lidar-measured annual average extinction coefficient increased linearly with the Planetary Boundary Layer Height (PBLH) in the range of 100 ~ 670 m, but exponentially decreased between the heights of 670 ~ 1800 m. Both the correlation and the variation tendency of simulated PBLH from WRF_SHIN/CALMET were closer to the Lidar observation than that of three other Planetary Boundary Layer (PBL) schemes (the Grenier-Bretherton-McCaa (GBM) scheme, the he Total Energy-Mass Flux (TEMF) scheme and the University of Washington (UW) scheme), which suggested that the simulated PBLH could be used in the vertical correction of retrieval PM_2.5. Four seasonal fitting functions were also obtained for further humidity correction. The correlation coefficient between the aerosol extinction coefficient and the fitted surface-level PM_2.5 concentration at the benchmark station of Southwest Jiao-tong University was enhanced significantly from 0.62 to 0.76 after vertical and humidity corrections during a whole year. During the evaluation of the retrieved ground-level PM_2.5 with observed values from three cities, Yibin (YB), Dazhou (DZ), and Deyang (DY), our algorithm performed well, resulting in higher correlation coefficients of 0.78 (N = 177), 0.77 (N = 178), and 0.81 (N = 181), respectively.

The chemical industry is an integral part of the world economy and a substantial income source for developing countries. However, existing regulations or the enforcement of these regulations, on controlling atmospheric pollutants sometimes may be insufficient, leading to the deterioration of surrounding ecosystems and to a quality decrease of the atmospheric environment. Previous works in this domain fail to generate executable solutions for inspection agencies due to practical challenges. In addressing these challenges, we introduce a so-called Chemical Plant Environment Protection Game (CPEP) to generate reasonable schedules of high-accuracy air quality monitoring stations for inspection agencies. First, Stackelberg Security Games (SSGs) are incorporated together with source estimation methods into this research. Second, high-accuracy air quality monitoring stations as well as gas sensors are modeled into the CPEP. Third, simplified data analysis on the regularly discharging of chemical plants is utilized to construct the CPEP. Finally, an illustrative case study is used to investigate the effectiveness of the CPEP Game, and a realistic case study is conducted to illustrate how the models and algorithms being proposed in this paper, work. Results show that playing a CPEP Game can reduce operational costs of high-accuracy air quality monitoring stations; moreover, playing the game leads to more compliance from the chemical plants towards the inspection agencies.

The development of new diabetes drugs continues to be explored. Loureirin B, a flavonoid, extracted from Dracaena cochinchinensis, has been confirmed to increase insulin secretion and decrease blood glucose levels. For understanding the mechanism, a series of experiments had been employed based on computational methods and cell experiments. The insulin secretion significantly increased with the incubation of 0.01μM loureirin B for 4 hours. The viability of Ins-1 cells showed no significant difference with the treatment of loureirin B. Through computational methods, we hypothesized that loureirin B could interacts with K_ATP channels to promote insulin secretion. In cell experiments, it could be found that the current of K_ATP channel of Ins-1 cells was inhibited by the effect of loureirin B. After then, the voltage-dependent calcium channels were activated, the increase of Cx43 protein expression might mediate the Ca²⁺ to the intracellular. In summary, it could be concluded that loureirin B promoted insulin secretion mainly through inhibiting K_ATP current, the influx of Ca²⁺ to the Intracellular and the expression of Cx43.

Regarding landscape preferences for highways, there is a dynamic interaction between users and the variety of natural and cultural landscape elements along the roadside, reflecting a balance between the highway and the natural environment. However, the rapid pace of urbanization has accelerated the development of highways, leading to the neglect or destruction of valuable landscapes. This highlights the need for visual preference assessments to protect aesthetic and environmental values. Currently, there is a lack of comprehensive criteria for assessing the visual preference of highway landscapes. Therefore, this study aims to review existing literature and establish complete assessment criteria. This study conducted a systematic literature review by searching for keywords in three databases: Web of Science, Scopus, and Google Scholar. The review included 22 papers published between 2013 and 2023 that met the criteria. An additional four relevant papers were included through a “snowballing” approach to supplement the research and results. The results of the study focused on the relationships between highway landscapes and users, user preferences, preference methods, and related variables. These inter-established relationships were used to complete an assessment framework, which establishes a basic reference standard for professionals.

The Stepped Frequency Waveform (SFW) is commonly employed in radar technology to synthesize wideband signals through the aggregation of narrow-band pulses, thereby achieving high-resolution range profiles without the need to increase the radar's instantaneous bandwidth. However, the inherent large time-bandwidth product of SFW introduces substantial ranging errors and energy dispersion, which significantly hinders its efficacy in detecting high-speed objects. This paper introduces a pioneering velocity estimation technique utilizing the fractional Fourier transform (FrFT) to address these limitations. Leveraging the characteristic of the Doppler signal from a moving target, which manifests as a chirp signal with a rate proportional to the target's velocity, the FrFT is utilized for precise velocity estimation. Subsequent to this, velocity compensation is applied using the deduced metrics, followed by the application of the inverse fast Fourier transform (iFFT) to pinpoint the target's exact location. To optimize the computational efficiency of determining the FrFT's optimal order, we propose an iterative algorithm founded on the golden section search method. The effectiveness of the proposed approach is verified by simulation data, and the results demonstrate that the proposed approach can accurately estimate the velocity and the range of the high-speed targets with a relatively low computational complexity.

The effects of rare earth Y content on the microstructure and high-temperature oxidation properties of 47Fe-36Ni-15Cr-1.5Mn alloy at 1000°C were investigated. The results show that 47Fe-36Ni-15Cr-1.5Mn alloy oxidizes at 1000°C under laboratory atmospheric pressure to form an oxide film layer dominated by Cr2O3 and (Fe, Ni, Mn) Cr2O4 spinel, and the oxidation curve of the alloy follows the parabolic law. After the addition of rare earth Y, rare earth phases precipitated along the grain boundaries in the alloy, and the more Y content, the more precipitated phases in the grain boundaries. The alloy with added rare earths was oxidized at a high temperature of 1000 °C for 2160 min, the oxidation law still followed the parabolic law, while the rare earth phase at the grain boundary reacted with the oxygen atoms infiltrated from the outside to generate a rare earth Y-rich oxide residing at the boundary between the grain boundary and the precipitated phase of the alloy. Add 0.5 wt.% rare earth Y 47Fe-36Ni-15Cr-1.5Mn-0.5Y alloy 1000 ° C high temperature oxidation of the formation of spinel oxide crystalline particles, dense and complete oxide film layer, the surface of the addition of a small amount of (0.5 wt.%) rare earth Y after the refinement of the oxide particles, and in the alloy grain boundaries in the form of oxides reside in the alloy to inhibit the cations in the matrix and the oxygen negative ions. and oxygen-negative ions in the alloy matrix, improving the antioxidant performance of the alloy. With the further increase of rare earth Y, during the oxidation of the alloy at high temperature, the precipitation phase at the grain boundary promotes the inward diffusion of oxygen, resulting in the deterioration of the antioxidant property of the alloy.

Melittin, a natural antimicrobial peptide, displays a broad-spectrum antimicrobial activity, which has caused increasing attention as a potential antibiotic alternative. However, melittin has not been used widely at present due to its high hemolysis and low proteolytic stability. In this study, N-terminal fatty acid was conjugated to melittin to develop new melittin-derived lipopep-tides (MDLs) for improving the limitation of melittin. Our results showed that, the antimicrobial activity of MDLs was increased by 2 to 16 times compared with native melittin, and the stability of these MDLs against trypsin and pepsin degradation was increased by 50 to 80%. Besides, the hemolytic of the MDLs decreased when the length of the carbon chain of fatty acids exceeded 10. Among them, the newly designed analog Mel-C8 showed optimal antimicrobial activity and protease stability. The antimicrobial mechanism studied revealed that the MDLs showed a rapid bactericidal effect by interacting with LPS or LTA and penetrating the bacterial cell membrane. In conclusion, we designed and synthesized a new class of MDLs with potent antimicrobial activity, high proteolytic stability, and low hemolysis through N-terminal fatty acid conjugation.

The COVID-19 pandemic has emphasized the crucial role of ventilation systems in mitigating cross-infections, especially in infectious disease hospitals. This study introduces a dual-design operation ventilation system that can operate under two sets of ventilation conditions for normal and epidemic times. A challenge is optimizing duct diameters for required airflow while maintaining hydraulic balance. We design a genetic algorithm with adaptive penalty factor, the velocity constraint and the improved crossover and mutation probability. The improved genetic algorithm is suitable for ventilation system networks, which can find a better air duct diameters combination to improve the hydraulic balance rate, and reduce the usage of air valves, resulting in efficient hydraulic balancing commissioning. Compared with the traditional genetic algorithm, it has a faster search speed and a better global search ability, which is effective for the optimal design of ventilation system networks.

In order to study the effects of dietary folic acid (FA) supplementation on growth performance and immune status in weanling piglets, a single factorial randomized block design trial with 6 dietary FA levels at 0.35, 0.66, 2.19, 5.18, 7.51 or 10.81 mg/kg was conducted. A total of 108 crossbred (Landrace × Yorkshire) castrated weanling piglets (at 21 d of age) were allocated by body weight into 36 feeding cages (3 piglets/cage), which were allotted randomly into 6 dietary groups (6 cages/group). Piglets were fed ad libitum for 24 days. Blood samples were collected on the 24th day. The growth performance and the immune parameters were measured. Results showed that FA supplementation increased the serum FA level of weaned piglets (p < 0.01), and tended to increase the body weight (BW) at 45 d of age (p < 0.1) and the average daily gain (ADG) from 29 d to 45 d of age (p < 0.1). FA addition improved the feed efficiency (G/F) from 21 d to 45 d of age (p < 0.01), and with significant effects at 21 d to 45 d of age with FA 2.19 or 7.51 mg/kg (p < 0.05). Dietary FA at 0.66 or 2.19 mg/kg increased the serum CD3+CD8+ subset (p < 0.05), decreased the CD3+CD4+ / CD3+CD8+ ratio (p < 0.05); Moreover, FA addition increased the serum IFN-γ level (p < 0.05). In conclusion, the adequate dietary FA is necessary to improve the immunity and growth performance of weaned piglets at 21 d of age. The suitable dietary FA level for immune function from 21 d to 45 d of age was 0.66 mg/kg, while were 6.82 mg/kg from 21 d to 28 d of age and 5.42 mg/kg from 29 d to 45 d of age respectively for feed efficiency.

Objective: To compare the overall survival (OS) and surgical outcomes between open and minimally invasive surgery (MIS) in a large cohort of women with Type II endometrial cancer. Methods: Using the National Cancer Database, we identified a cohort of women who underwent hysterectomy for type II endometrial cancer (serous, clear cell, carcinosarcoma) between January 2010 and December 2014. Primary outcome was the comparison of OS between MIS and the open approach. Secondary outcomes included the length of hospital stay, readmission rate, 30- and 90-day mortality. Multivariable logistic regression and inverse propensity weighting analyses were performed. Results: A total of 12,905 patients with Type II, Stage I-III endometrial cancer who underwent hysterectomy were identified. Among these patients, 7,123 (55.2%) underwent MIS. The utilization of MIS increased from 39% to 64% over the four-year period. In propensity-score-weighted analysis, MIS was associated with superior OS (101.7 vs. 86.7 months, p=0.0003 by the log-rank test), with a hazard ratio of 0.9 (CI 0.857-0.954, p=0.0002). MIS was also associated with improved perioperative outcomes, including a shorter length of stay (1 vs. 4 days, p<0.001), lower 30-day readmission rate (2.5% vs. 5%), and lower 30- and 90-day postoperative mortality (0.5% vs. 1.3% and 1.5% vs. 3.6%, respectively; p<0.001). The time interval between surgery and initiation of chemotherapy was shorter in the MIS group (38 vs. 41 days, p<0.001).The increase in MIS adoption correlated with a decrease in 90-day postoperative mortality (2.8% to 2.2%, r=-0.89; p=0.003) and 12-month overall mortality (51% to 38%, r=-0.95, p=0.006). Conclusions: In an epidemiologic study, MIS is associated with improved overall survival and superior perioperative outcomes compared to open surgery in women with Type II endometrial cancer.

Optical network monitoring and soft failure identification such as optical filter shifting and filter tightening is increasingly significant in the future complex and dynamic optical networks. Center frequency shift of optical filtering device in optical network has a serious impact on the perfor-mance of multi-span transmission, especially in high spectrum efficiency faster-than-Nyquist (FTN) transmission systems with various optical switching and add/drop nodes. Existing moni-toring schemes generally have problem of high cost, high complexity and the inability to realize multi-channel online monitoring, which makes it difficult to be applied in wavelength division multiplexing (WDM) system with numerous nodes. In this paper, a monitoring scheme of fre-quency shift of optical filtering devices based on optical label (OL) is proposed and demonstrated. The signal spectrum of each channel is intentionally divided into many sub-bands with corre-sponding optical labels loading. The characters of spectrum power changing caused by frequency shift can be reflected on labels power changing of each sub-band, which are used to monitor and estimate the value of frequency shift by DSP algorithm. Simulation results shows that the that the monitoring errors of frequency shift can be kept below 0.5GHz reasonably after 10-span WDM transmission in FTN polarization multiplexing m-ary quadrature amplitude modulation (PM-mQAM) systems. In addition, 250km fiber transmission experiments are also carried out and the similar results are obtained, which further verify the feasibility of our proposed scheme. The characters of low cost, high reliability and efficiency make it a better candidate for practical ap-plication in the future FTN WDM networks.

Global climate change, dominated by climate warming, is seriously affecting the balance of global ecosystems, but the risk of species extinction is particularly high in low-altitude mountain areas. To clarify the response of the endemic and critically endangered species Ilex nanchuanensis to climate change, this study used the MaxEnt model to simulate and predict the potential habitat of I. nanchuanensis during the Last Interglacial, Last Glacial Maximum, the current period, and two future periods (the 2050s and 2070s). The results showed that the hottest monthly minimum temperature is the most important climatic factor affecting the geographical distribution of I. nanchuanensis. Furthermore, I. nanchuanensis will be at risk of population shrinkage and extinction in the future, with the center of mass moving further northwest as concentrations of greenhouse gases increase, especially in the 2070s, when its geographical distribution shrinks the most under the RCP6 scenario. Global warming is causing habitat degradation for many species and will continue to migrate to higher altitudes and latitudes in the future, seriously affecting the global ecosystem balance. Therefore, to actively respond to the impacts of climate change, protected areas should be established around the geographical distribution centers of species, and core, buffer, and experimental areas should be scientifically and rationally delineated for the conservation and cultivation of germplasm resources.

Diabetic kidney disease (DKD) is one of the leading causes of end-stage renal disease worldwide and significantly increases the risk of premature death due to cardiovascular diseases. Elevated urinary albumin levels are an important clinical feature of DKD. Effective control of albuminuria not only delays glomerular filtration rate (GFR) decline but also markedly reduces cardiovascular disease risk and all-cause mortality. New drugs for treating DKD proteinuria, including sodium-glucose cotransporter 2 inhibitors (SGLT2i), mineralocorticoid receptor antagonists (MRAs), and endothelin receptor antagonists (REAs), have shown significant efficacy. Auxiliary treatment with proprietary Chinese medicine has also yielded promising results; however, it also faces a broader scope for development. The mechanisms by which these drugs treat albuminuria in patients with DKD should be described more thoroughly. The positive effects of combination therapy with two or more drugs in reducing albuminuria and protecting the kidneys warrant further investigation. Therefore, this review explores the pathophysiological mechanism of albuminuria in patients with DKD, the value of clinical diagnosis and prognosis, new progress and mechanisms of treatment, and multidrug therapy in patients who have type 2 diabetic kidney disease (T2DKD), providing a new perspective on the clinical diagnosis and treatment of DKD.

Genetic adaptation of Hermetia illucens (BSF) to suboptimal single sourced wastes can open new perspectives for insect production. Here, four replicate BSF lines were maintained on a single sourced, low-quality wheat bran diet (WB) or on a high-quality chicken feed diet (CF) for 13 generations. We continuously evaluated evolutionary responses in several performance traits to rearing at the two diets. Subsequently, we tested responses to interchanged diets, i.e. of larvae that had been adapted to low-quality feed and to high quality feed and vice versa to evaluate costs associated with diet adaptation. BSF were found to experience rapid adaptation to the diet composition. While performances on WB diet were always inferior to CF diet, the adaptive re-sponses were stronger to the former diet. This stronger response was likely due to stronger se-lection pressure experienced by BSF fed on the low-quality single sourced diet. The interchanged diet experiment found no costs associated with diet adaptation but confirmed diet adaptation for the larval biomass and insect frass traits for the WB diet treatment. Our results revealed that BSF can rapidly adapt to diet through evolutionary responses, which has potential to be utilized to produce lines tailored to specific diets.

We study the influence of high-order twisting phases on polarization states and optical angular momentum of a vector light field with locally linear polarization and a hybrid state of polarization (SoP). The initial SoP of a twisted vector optical field (TVOF) modulated by the high-order twisting phase possesses various symmetric distributions. The propagating properties of a high-order TVOF with locally linear polarization and hybrid SoP are explored, including the intensity compression, expansion, and conversion between the linear and circular polarization components. In particular, orbital angular momentum (OAM) appears in a high-order TVOF during propagation where no OAM exists in the initial field. The variation of OAM distribution in cross-section becomes more frequent with the increase of the twisting phase order. In addition, a non-symmetric OAM distribution appears in an anisotropic TVOF, leading to the rotation of the beam around the propagation axis during propagation. These results provide a new approach for optical field manipulation in a high-order TVOF.

Phosphorus (P) is an essential plant macronutrient; however, its availability is often limited in soils. Plants have evolved complex mechanisms for efficient phosphate (Pi) absorption, which are responsive to changes in external and internal Pi concentration, and orchestrated through local and systemic responses. To explore these systemic Pi responses, here, we identified AtMYB44 as a phloem-mobile mRNA, an Arabidopsis homolog of Cucumis sativus MYB44, that is responsive to the Pi-starvation stress. qRT-PCR assays revealed that AtMYB44 was up-regulated and expressed in both shoot and root in response to Pi-starvation stress. The atmyb44 mutant displayed higher shoot and root biomass, compared to wild-type plants, under Pi-starvation conditions. Interestingly, the expression of PHOSPHATE TRANSPORTER1;2 (PHT1;2) and PHT1;4 was enhanced in atmyb44 in response to a Pi-starvation treatment. A split-root assay showed that AtMYB44 expression was systemically regulated, under Pi-starvation conditions and, in atmyb44, systemic controls on PHT1;2 and PHT1;4 expression were moderately disrupted. Heterografting assays confirmed graft transmission of AtMYB44 transcripts, and PHT1;2 and PHT1;4 expression was decreased in heterografted atmyb44 rootstocks. Taken together, our findings support the hypothesis that mobile AtMYB44 mRNA serves as a long-distance Pi response signal, which negatively regulates Pi transport and utilization in Arabidopsis.

Current effort with light field displays is mainly concentrated on the widest possible viewing angle, while a single viewer only needs to view the display in a specific viewing direction. To make light field display a practical practice, a super multi-view light field display is proposed to compress the information in the viewing zone of a single user by reducing the redundant viewpoints. A quasi-directional backlight is proposed and a lenticular lens array is applied to achieve the restricted viewing zone. Eye-tracking technique is applied to extend the viewing area. Experimental results show that the proposed scheme can present vivid 3D scene with smooth motion parallax. Only 16.7% conventional light field display data are required to achieve 3D display. Furthermore, an illumination power of 3.5 watt is sufficient to lighten a 31.5-inch light field display，which takes up 1.5% of the illumination power required for planar display of similar configuration.

Management of chronic inflammation and wounds has always been a key issue in the pharmaceutical and healthcare sector. Curcumin (CCM) is an active ingredient extracted from turmeric rhizomes that has antioxidant, anti-inflammatory, and antibacterial activities, thus showing significant effectiveness toward wound healing. However, its shortcomings such as poor water solubility, poor chemical stability and fast metabolic rate limit its bioavailability and long-term use. In this context, hydrogels appear to be a versatile matrix for carrying and stabilizing drugs due to the biomimetic structure, soft porous microarchitecture, and pleasant biomechanical properties. The drug loading/releasing efficiencies can also be controlled by use of highly crystalline and porous metal organic frameworks (MOFs). Here, a flexible hydrogel composed of sodium alginate (SA) matrix and CCM-loaded MOFs was constructed for long-term drug release and antibacterial activity. The morphology and physicochemical properties of composite hydrogels were analyzed by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), ultraviolet visible spectroscopy (UV-Vis), Raman spectroscopy and mechanical property tests. The results showed that the composite hydrogel was highly twistable and bendable to mechanically comply with human skin. The as-prepared hydrogel could capture efficient CCM for slow drug release as well as effective killing of bacteria. Therefore, such composite hydrogel is expected to provide a new management system for chronic wound dressings.

Abstract Background: Parkinson's disease (PD) is a neurodegenerative disorder featured with motor and non-motor deficits. Using 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP) induced dopamine neuron degeneration has been widely used to produce reliable animal models of the PD. However, most of previous preclinical studies focused on the motor dysfunctions, few non-motor symptoms were evaluated. So far there is a lack of comprehensive investigation of the non-motor symptoms in animal models. Objectives: In this study, we aim to use a battery of behavioral methods to evaluate the non-motor symptoms in MPTP-induced non-human primate PD models. Methods: Cognitive functions, sleep and psychiatric behaviors were evaluated in MPTP-treated cynomolgus monkeys. The tests consisted of delayed matching-to-sample (DMTS), physical activity monitor (PAM), apathy feeding task (AFT), human intruder test (HIT), novel fruit test (NFT) and predator confrontation test (PCT). In addition, we tested whether the dopamine receptor agonist pramipexole (PPX) will improve these non-motor symptoms. Results: The present results show that the MPTP-treated monkeys exhibited cognitive deficits, abnormal sleep, and anxiety-like behaviors as compared to the control monkeys. These symptoms were relieved partially by PPX. Conclusions: These results suggest that MPTP-induced PD monkeys displayed non-motor symptoms that were similar to those found in PD patients. PPX treatment showed moderate therapeutic effects on these non-motor symptoms. This battery of behavioral tests may provide a valuable model for future preclinical research.

PEDOT:PSS (polyethylene dioxythiophene:polystyrenesulfonate) is a commonly used hole injec-tion layer (HIL) in optoelectronic devices due to its high conductive properties and work function. However, the acidic and hygroscopic nature of PEDOT:PSS can be problematic for device stability over time. To address this issue, in this study, we have demonstrated the potential of an organic-inorganic hybrid HIL, by incorporating solution-processed WOx nanoparticles (WOx NPs) into the PEDOT:PSS mixture. This hybrid solution was found to have a superior hole transport ability and low Ohmic contact resistance, contributing to higher brightness (~62 000 cd m-2) and current efficiency (13.1 cd A-1) in the manufactured quantum-dot based light-emitting diodes (QLEDs). In addition, the resulting devices achieved a relative operational lifetime of 7,071 hours, or approxi-mately twice that of traditional QLEDs with PEDOT:PSS HILs. The proposed method is an un-complicated, reliable and low-cost way to achieve long operational lifetimes without sacrificing efficiency in optoelectronic devices.

Mulberry leaves are a classic herb commonly used in traditional Chinese medicine, and experience since ancient times has shown that leaves collected after frost have better medicinal properties. However, the characteristics of the changes of critical metabolic components in mulberry leaves, especially Morus nigra L., are still unknown. To further study the influence of harvesting time on the dynamic changes of metabolites, especially DNJ compounds and flavonoids, in mulberry leaves after frost. We used metabolomics technology to select 100+ metabolites as indexes to reflect the dynamic changes of metabolites in mulberry leaves comprehensively. The results showed significant differences in the effects of defrosting on the accumulation of metabolites in the leaves of Morus nigra L. and Morus alba L. The content of DNJ in the leaves of Morus nigra L. showed a decreasing trend after the frost, while flavonoids reached the peak of the second frost. For Morus alba L, DNJ showed an increasing trend after frost, especially reaching its peak one day after the second frost. Flavonoids mainly peak in the week before the frost. In addition, by analyzing the influence of picking time on metabolite accumulation in two mulberry leaves, it was concluded that higher DNJ alkaloids and flavonoids would be obtained in mulberry leaves collected in the morning. This study also provides scientific guidance for the optimum harvesting time of mulberry leaves.

This article presents a state-of-the-art system to extract and synthesize causal statements from company reports into a directed causal graph. The extracted information is organized by the relevance to different stakeholder groups’ benefits (customers, employees, investors, and the community/environment). The presented method of synthesizing extracted data into a knowledge graph comprises a framework that can be used for similar tasks in other domains, e.g. medical information. The current work addresses the problem of finding, organizing, and synthesizing a view of the cause-and-effect relationships based textual data, in order to inform and even prescribe the best actions that may affect target business outcomes related to different stakeholders’ benefits (customers, employees, investors, and the community/environment).

Despite empirical findings that prosociality can prevent children and adolescents from developing psychological maladjustment, little is known about the underlying mechanisms. The goal of the present study was to examine the mediating effects of peer preference and self-perceived social competence on the associations between prosociality and psychological maladjustment (i.e., depressive symptoms and loneliness). Participants were 951 students (Mage = 11 years, 442 girls) in Grades 3~7 from Shanghai, China. They completed peer nominations of prosociality and peer preference, and self-report measures of self-perceived social competence, depressive symptoms, and loneliness. Multiple mediation analyses revealed that: (a) both peer preference and self-perceived social competence mediated the relations between prosociality and psychological maladjustment; and (b) a serial indirect pathway (i.e., prosociality  →  peer preference  →  self-perceived social competence →  psychological maladjustment) emerged when controlling for grade and gender. These findings point to potential targets in the prevention and intervention of adolescent internalizing problems.

The spiral tube heat exchange is widely used in large-scale liquefaction process. However, the research on the friction pressure drop of the two-phase flow in the spiral tube is limited, especially for the offshore sloshing condition. In this paper, an experimental system is designed and built, and the effects of sloshing form (roll, pitch, heave), sloshing period (5-15s), mass flux (200-800 kg/(m2·s)), vapor quality (0.3-0.9) and operating pressure (2-4 MPa) on friction pressure drop of methane/ethane (C1/C2) mixture in spiral tube are studied. The result shows that the growth rate of time-averaged friction pressure drop during condensation under sloshing condition is less than 0, which indicates that sloshing will lead to drag reduction. And under the three sloshing parameters, the growth rate of time-averaged friction pressure drop of C1/C2 is reduced by-5.99%%, 5.97% and -6.70% respectively.

Evaluating the efficacy of the traceability systems (TS) plays an important role not only for planning system implementation before development, but also for analyzing system performance once the system is in use. In the present work, we evaluate the traceability granularity using a comprehensive and quantifiable model and try find its influencing factors via an empirical analysis with 80 vegetable companies in Tianjin city, China. Granularity indicators were collected mostly by the TS platform to ensure the objectivity of the data, and the granularity score was evaluated by using a TS granularity model. The results show a clear imbalance in the distribution of companies as a function of score. The number of companies (21) scoring in the range [50,60] exceeded the number in the other score ranges. Furthermore, the influencing factors on traceability granularity were analyzed by using a rough set method based on nine factors pre-selected by using a published method. The results show that the factor “number of TS operation staff” is deleted because it is unimportant. The remaining factors rank according to importance as follows: Expected revenue &gt; Supply chain (SC) integration degree &gt; Cognition of TS &gt; Certification system &gt; Company sales &gt; Informationization management level &gt; System maintenance investment &gt; Manager education level. Based on these results, the corresponding implications are given with the goal of (i) establishing the market mechanism of high price with high quality, (ii) increasing government investment for constructing the TS, and (iii) enhancing the organization of SC companies.

Abstract: Cancer cells are originated by normal cells and with those share the need to be fed. Metabolic reprogramming in cancer cells is not yet fully understood although there is a vast literature suggesting that huge amounts of both energy and substrates are require for synthesis of components of new neoplastic cells so that any macronutrient may be efficiently utilized. Recently, in vitro data show that EAA supplementation promoted colon cancer cells apoptosis by enhanced autophagy. Therefore, in this study we tested in vivo the effects of matched macronutrients standard laboratory diet (control) versus EAA rich modified diet (EAArmd) in mice injected with colon cancer cells. Results of the first set of 12 animals, 6 controls and 6 EAArmd-fed, showed that controls mice develop cancer volume cancers 5 times larger and heavier than EAArmd-fed. If confirmed, these results would open new scenarios for the cancer integrate therapies.

Cancer cells are originated by normal cells and with those share the need to be fed. Metabolic reprogramming in cancer cells is not yet fully understood, and there is a vast literature suggesting that any macronutrient may be efficiently utilized by cancer for duplication purposes. Metabolic hyperactivity of cancer and continuous duplication requires huge amounts of both energy and substrates for syntheses of components of new cells, and the modifications of metabolism induced by cancer cells to survive and grow damaging lethally, the whole organism. In rodents, we have recently observed that by modifying diet in a way not existent in nature, changing radically the ratios among essential and non-essential amino acids (AA) (usually less than 0.9), largely increasing essential-AA (EAA) percentages, lifespans increased. In vitro, EAA supplementation promoted colon cancer cells (CT116) apoptosis by enhanced autophagy. Therefore, we tested in mice if injection of colon cancer cells would have been followed by unvaried development of cancer volumes in animals fed with standard laboratory diet (controls) versus EAA rich modified diets (EAAmd). Both diets perfectly matched the same total macronutrients and micronutrients contents; only quality of nitrogen was radically different. Results of the first set of 8 animals, 4 controls and 4 EAAmd-fed, showed that controls develop cancers near 5 times larger and heavier than EAAmd-fed (P&lt;0,002) on the same time. We discuss which epigenetic modifications would be involved and worth to be studied, and what kind of scenarios those preliminary findings, if confirmed, would open.

Plant and animal agriculture is a part of a larger system where the environment, soil, water, nutrient management interact. Biochar (a pyrolyzed biomass) has been shown to affect the single components of this complex system positively. Biochar is a soil amendment, which has been documented for its benefits as soil enhancer particularly to increase soil carbon, improve soil fertility, and better nutrient retention. These effects have been documented in the literature. Still, there is a need for a broader examination of these single components and effects that aims at the complementarity and synergy attainable with biochar and the animal and crop production system. Thus, we report a comprehensive dataset documenting the interactions of biochar with manure, soil, and plants. We evaluated three biochars mixed with manure alongside both manure and soil controls for improvement in soil quality, reduction in nutrient movement, and increase in plant nutrient availability. We explain the experiments and the dataset which contains the physicochemical properties of each biochar-manure mixture, the physicochemical properties of soil amended with each biochar-manure mixture, and the biomass and nutrient information of plants grown in biochar-manure mixture amended soil. This dataset is useful for continued research examining both the short and long-term effects of biochar-manure mixtures on both plant and soil systems. In addition, these data will be beneficial to extent the findings to field settings for practical and realized gains.

A general approach to substituted pyrrolidines via [3 + 2] 1,3-dipolar cycloaddition between nonstabilized azomethine ylides and cyanosulfones was developed. The efficient method provides a series of substituted pyrrolidines bearing a quaternary carbon center in high yields (up to 98%) excellent diastereoselectivities (up to &gt;25:1 dr) under ambient reaction conditions.

People living in slums and other deprived areas in low- and middle-income country (LMIC) cities are under-represented in censuses, and subsequently in "top-down" gridded population estimates. Modelled gridded population data are a unique source of disaggregated population information to calculate local development indicators such as the Sustainable Development Goals (SDGs). This study evaluates if, and how, WorldPop-Global (WPG) -Unconstrained and -Constrained “top-down” datasets might be improved in a simulated realistic LMIC urban population by incorporating slum profile population counts into model training. We found that the WPG-Unconstrained model with or without slum training data grossly underestimated population in urban deprived areas while grossly overestimating population in rural areas. SDG 11.1.1, the percent of population living in slums, for example, was estimated to be 20% or less compared to a "true" value of 29.5%. The WPG-Constrained model, which included building auxiliary datasets, far more accurately estimated the population in all grid cells (including rural areas), and the inclusion of slum training data further improved estimates such that SDG 11.1.1 was estimated at 27.1% and 27.0%, respectively. Inclusion of building metrics and slum training data in “top-down” gridded population models can substantially improve grid cell-level accuracy in both urban and rural areas.

Wrist-worn fitness trackers and smartwatches are proliferating with an incessant attention towards health tracking. Given the growing popularity of wrist-worn devices across all age groups, a rigorous evaluation for recognizing hallmark measures of physical activities and estimating energy expenditure is needed to compare their accuracy across the lifespan. The goal of the study was to build machine learning models to recognize physical activity type (sedentary, locomotion, and lifestyle) and intensity (low, light, and moderate), identify individual physical activities, and estimate energy expenditure. The primary aim of this study was to build and compare models for different age groups: young [20-50 years], middle (50-70 years], and old (70-89 years]. Participants (n = 253, 62% women, aged 20-89 years old) performed a battery of 33 daily activities in a standardized laboratory setting while wearing a portable metabolic unit to measure energy expenditure that was used to gauge metabolic intensity. Tri-axial accelerometer collected data at 80-100 Hz from the right wrist that was processed for 49 features. Results from random forests algorithm were quite accurate in recognizing physical activity type, the F1-Score range across age groups was: sedentary [0.955 – 0.973], locomotion [0.942 – 0.964], and lifestyle [0.913 – 0.949]. Recognizing physical activity intensity resulted in lower performance, the F1-Score range across age groups was: sedentary [0.919 – 0.947], light [0.813 – 0.828], and moderate [0.846 – 0.875]. The root mean square error range was [0.835 – 1.009] for the estimation of energy expenditure. The F1-Score range for recognizing individual physical activities was [0.263 – 0.784]. Performances were relatively similar and the accelerometer data features were ranked similarly between age groups. In conclusion, data features derived from wrist worn accelerometers lead to high-moderate accuracy estimating physical activity type, intensity and energy expenditure and are robust to potential age-differences.

Low- and middle-income country cities face unprecedented urbanization and growth in slums. Gridded population data in small grid squares (e.g., 100x100m) derived from demographic and spatial data are a promising source of current population estimates, but face limitations in slums due to the dynamic nature of this population as well as modelling assumptions. The efficacy of using gridded population data in slum areas remains a question mark especially in the context of UN SDG indicator development. In this study, we use field-referenced boundaries and population counts from Slum Dwellers International (SDI) in Lagos (Nigeria), Port Harcourt (Nigeria), and Nairobi (Kenya) to assess the accuracy of nine gridded population datasets in slums. We also use a modelled map of all slums in Lagos to assess use of gridded population dataset for SDG11.1.1 (percent of population living in deprived areas). We found that all gridded population estimates vastly under-estimated population counts in populous slums, and the calculation of SDG11.1.1 in Lagos was impossibly low; gridded population datasets estimated that just 1-3% of the Lagos population lived in slums, compared to 56% using the UN-Habitat approach. We outline specific steps that might be taken to improve each gridded population dataset in deprived urban areas. While gridded population estimates are not yet sufficiently accurate to estimate SDG11.1.1, we are optimistic that some datasets could be following updates to their modelling approaches.

Diffuse intrinsic pontine gliomas (DIPGs) account for ~15% of pediatric brain tumors, which invariably present with poor survival regardless of treatment mode. Several seminal studies have revealed that 80% of DIPGs harbor H3K27M mutation coded by HIST1H3B, HIST1H3C and H3F3A genes. The H3K27M mutation has broad effects on gene expression and is considered a tumor driver. Determination of the effects of H3K27M on posttranslational histone modifications and gene regulations in DIPG is critical for identifying effective therapeutic targets. Advanced animal models play critical roles in translating these cutting-edge findings into clinical trial development. Here, we review current molecular research progress associated with DIPG. We also summarize DIPG animal models, highlighting novel genomic engineered mouse models (GEMMs) and innovative humanized DIPG mouse models. These models will pave the way towards personalized precision medicine for the treatment of DIPGs.

Aiming for the problems emerging in the PWM drive system with long cables, accurate modeling of power cables is the premise to predict and analyze the relevant phenomenon, and a proper filter design is the key solution to these problems. This paper proposes high-frequency cable models to represent the frequency-dependent characteristics, especially for the high-frequency resistance of the cable that is an easily overlooked factor but determines the damping of overvoltage. The proposed models can be used for accurately representing the cable parameters in a wide frequency range, and correctly simulating the differential mode (DM) overvoltage and common mode (CM) current, including the peak value, oscillation frequency and damping of the transient waveform. In addition, improved filter networks are proposed to suppress the DM voltage and CM current, with the merit of low losses, small volume and an excellent ability of suppressing overvoltage. The proposed cable models and the filter design have been validated in a 750W PWM drive system with 200m power cables.

The cytokinins play important roles in plant growth and development by regulating gene expression at genome wide level. DNA methylation is responsive to the external environment, but whether DNA methylation changes in response to cytokinin treatment to regulate gene expression is still unclear. Here, we used bisulfite sequencing and RNA sequencing to examine genome-wide DNA methylation and gene expression patterns in poplar (Populus tomentosa) after treatment with the synthetic cytokinin 6-benzylaminopurine (6-BA). We identified 566 significantly differentially methylated regions (DMRs) in response to 6-BA treatment. Transcriptome analysis showed that 501 protein-coding genes, 262 long non-coding RNAs, and 15,793 24-nt small interfering RNAs were differentially expressed under 6-BA treatment. Among these, 79% were differentially expressed between alleles in P. tomentosa. Combined DNA methylation and gene expression analysis demonstrated that DNA methylation plays an important role in regulating allele-specific gene expression. To further investigate the relationship between these 6-BA-responsive genes and phenotypic variation, we performed SNP analysis of 507 6-BA-responsive DMRs via re-sequencing using a natural population of P. tomentosa and identified 206 SNPs that were significantly associated with growth and wood properties. Association analysis indicated that 53% of loci with allele-specific expression had primarily dominant effects on poplar traits. Our comprehensive analyses of P. tomentosa DNA methylation and the regulation of allele-specific gene expression suggest that DNA methylation is an important regulator of imbalanced expression between allelic loci.

Objective: Pancreatic carcinoma (PANC) is one of the important aggressive cancers, with deficiency in effective therapeutics. Studies have unveiled that miR-139-5p expression is significantly downregulated in other types of cancers. However, the functions and mechanisms of miR-139-5p in PANC remain unclear. Methods: Bioinformatic analysis was performed to analyze the differentially expressed genes in the TCGA database. PANC cell line with overexpressed miR-139-5p and Solute Carrier Family 7, Member 11 (SLC7A11) was established, and has been used to detect cell proliferation, migration, invasion and colony formation in PANC. Subsequently, bioinformatic analysis and luciferase assay were performed to confirm that SLC7A11 was a target gene of miR-139-5p. Xenograft mouse model was used to investigate the role of miR-139-5p in PANC tumorigenicity. Results: Through bioinformatic analysis, miR-139-5p was predicted to regulate phosphatidylinositol signaling pathway by targeting SLC7A11. MiR-139-5p was found to be lowly expressed in PANC tissues, while SLC7A11 was highly expressed. Low expression of miR-139-5p and high expression of SLC7A11 were positively associated with poor clinical outcomes. PANC cell proliferation, migration, and invasion could be inhibited by miR-139-5p overexpression and could be promoted by SLC7A11 overexpression. MiR-139-5p could regulate the protein expression level of PI3K and Akt associated with phosphatidylinositol signaling pathway could be by inhibiting the expression of SLC7A11. MiR-139-5p overexpression could suppress PANC tumor growth and the expression of SLC7A11, p-PI3K, p-Akt in tumor tissues. Therefore, the inhibiting effect of miR-139-5p to PANC cell proliferation, invasion and migration, at least, was partly due to its inhibiting effect on SLC7A11 expression. Conclusion: These results demonstrated a novel role of miR-139-5p/SLC7A11 in PANC and provided potential prognostic predictors for PANC patients.

Organic compounds that contain poly-triazole are very important intermediates in pharmaceutical and chemical industry. Click chemistry is one of essential reactions that can form C-N bond with high atom economy. The research progress in metals catalyzed Click chemistry of azides and alkynes from the perspective of reaction mechanism is categorized and summarized.

Soil microbial fuel cells (sMFC) are a novel technique that use organic matters in soils as an alternative energy source. External resistance (ER) is a key factor influencing sMFC performance and, furthermore, alters the soil’s biological and chemical reactions. However, little information is available on how the microbial community and soil component changes in sMFC with different ER. Therefore, the effects of anodes of sMFC at different ER (2000 Ω, 1000 Ω, 200 Ω, 80 Ω and 50 Ω) were examined by measuring organic matter (OM) removal efficiency, trace elements in porewater and bacterial community structure in contaminated paddy soil. The results indicated that ER has significant effects on sMFC power production, OM removal efficiency and bacterial beta diversity. Moreover ER influences iron, arsenic and nickel concentration as well in soil porewater. In particular, greater current densities were observed at lower ER (2.4mA, 50Ω) compared to a higher ER (0.3mA, 2000Ω). The removal efficiency of OM increased with decreasing ER whereas it decreased with soil distance away from the anode. Furthermore, principal coordinate analysis (PCoA) revealed that ER may shape the bacterial communities that develop in the anode vicinity but have minimal effect on that of the bulk soil. The current study illustrates that lower ER can be used to selectively enhance the relative abundance of electrogenic bacteria and lead to high OM removal.

This research aims to explore and analyze the critical success factors (CSFs) that increase the likelihood of successful implementation of tourism PPP projects in China. As an important step toward developing such a protocol, this study identifies and examines 22 critical success factors for tourism PPPs based on a systematic research approach, which includes a rigorous literature review, and semi-structured interviews. A questionnaire survey was conducted to evaluate the relative importance of these 22 CSF. The results show that the top three critical success factors for China’s tourism PPPs are: adequate project evaluation and demonstration; political support and stability; clear and stable policy documents on PPP. Factor analysis indicated that the 22 CSFs could be grouped into five principal success factor groups. These insights are expected to profoundly influence the development of policies related to tourism PPPs, providing a structured framework to enhance the efficiency and success of these ventures.

This study investigates the transformative impact of ChatGPT, a cutting-edge AI language model developed by OpenAI, on the financial sector. We explore ChatGPT's applications in financial analysis, focusing on its ability to perform tasks traditionally handled by human analysts. By creating a set of multi-step and advanced reasoning financial tasks, and establishing several task-specific evaluation metrics, our experimental results demonstrate that ChatGPT-4o can effectively perform both basic and some complex financial analysis tasks comparable to those executed by humans. However, our empirical evaluation reveals limitations in its performance on complex tasks that require comprehensive understanding and critical thinking. The study highlights the necessity for meticulous task formulation and robust evaluation to achieve consistent functionality. While ChatGPT enhances efficiency in financial analysis, its integration with human expertise remains crucial for effective decision-making. This study contributes to the understanding of AI's role in finance and provides insights into its potential and constraints, guiding future integration of AI technologies in financial practices.

Three-dimensional flexible piezoresistive porous sensors have been used in health diagnosis and wearable devices. By utilizing 3D printed sacrificial mold casting with highly conductive polymer composites, porous sensors with high conductivity and complex structures were achieved. Traditional conductive polymer composites are usually heated using external heat sources, which are time and energy consuming. However, in this study, conductive porous sensors with triply periodic minimal surface (TPMS) structures were manufactured using self-resistance electric heating by utilizing the conductive nature of the polymers. The porous structures were designed based on Diamond (D), Gyroid (G), and I-WP (I) unit cells of the TPMS. The use of self-resistance electric heating has improved the compression performance and piezoresistive response of the structures. Among these structures, the D-based structure exhibited the maximum response strain (61 %), with a corresponding resistance response value of 0.97, which increased by 10.26 % compared to that of the structures heated by using the external heat sources. This study offers a new perspective on designing and optimizing porous materials with specific functionalities, particularly in the realm of flexible and portable piezoresistive sensors.

Recently, the composite materials consisting of ionic liquids (ILs) and metal-organic frameworks (MOFs) have attracted a great of attention due to their fantastic properties. Many theoretical studies have been performed towards its special structures and applications. Yet, the mechanism for the diffusion of ILs inside MOFs channels still remain unclear. Here, the DFT calculations together with frontier orbital analysis, natural charge analysis, and energy decomposition analysis were performed to investigate the diffusion behavior of a typical IL, [C4mim][PF6], into the ZIF-8 SOD cage. The potential energy surface (PES) profiles indicate that it is quite difficult for the cation [C4min]+ to diffuse into the cage of ZIF-8 through the pristine pores because of its large imidazole steric hindrance. Moreover, the PES reveals that a success diffusion could be obtained by the thermal contributions, by which the pore size is enlarged through the swing effects at a higher temperature. Subsequently, electronic structure analyses reveal that the main interactions between [PF6]-or [C4mim]+ and ZIF-8 is the steric repulsion interactions. Finally, the effects of amounts of [C4mim][PF6]on the ZIF-8 were investigated, and the results show that two pairs of [C4mim][PF6] per SOD cage is more reasonable in terms of interaction energies and structural changes.

Surface roughness prediction is a pivotal aspect of the manufacturing industry, as it directly influences product quality and process optimization. This study introduces a predictive model for surface roughness in the turning of complex-structured workpieces, utilizing Gaussian Process Regression (GPR) informed by vibration signals. The model captures parameters from both the time and frequency domains of the turning tool, encompassing the mean, median, standard deviation (STD), and root mean square (RMS) values. The signal is from the time to frequency domain is executed using Welch's method, complemented by time-frequency domain analysis employing three levels of Daubechies Wavelet Packet Transform (WPT). The selected features are then utilized as inputs for the GPR model to forecast surface roughness. Empirical evidence indicates that the GPR model can accurately predict the surface roughness of turned complex-structured workpieces. This predictive strategy has the potential to improve product quality, streamline manufacturing processes, and minimize waste within the industry.

To study the oil and gas distribution law in the slope area of the hydrocarbon-bearing basin, the distribution of the effective dominant path of sand bodies transporting oil and gas is a fundamental subject. In this paper, we introduced an effective way to predict such transport paths and applied the method to study the sand bodies of the lower first member of the Shahejie Formation (E3s1L) in the southern area of the Qikou Depression in the Bohai Bay Basin (Qinan). We first define the dominant hydrocarbon transport paths of the sand body as the superimposed area of the contiguously distributed area of the sand body and the paleotectonic ridges at the top of the formation where the sand body is located. Then we define the oil and gas supply area of the oil source fault as the overlapped area of the favorable transport path of oil source faults and the width of the associated fracture zone. Stacking the two areas, we can delineate the distribution of the effective dominant transport paths of the sand bodies. The results from our case study of the Qinan area show that the effective dominant paths of sand bodies transporting oil and gas in the E3s1L Formation in the Qinan area are distributed throughout the region with better development in the west than in the east. The paths in the eastern part extend from north to south, while the paths in the western part extend from northeast to southwest, which is favorable for the convergence of oil and gas generated from the source rocks of the third member of Shahejie Formation (Es3) in the Northeastern main depression of Qikou and the formation of oil and gas accumulations in the l E3s1L Formation. The results are consistent with the fact that oil and gas discovered in the E3s1L Formation in the Qinan region are mainly distributed in the central and western regions, with a small amount in the southeast. Therefore, the suggested method is feasible to predict the effective dominant path of sand bodies transporting oil and gas.

In recent years, Edge Intelligence (EI) has emerged, combining edge computing with AI, specifically deep learning, to run AI algorithms directly on edge devices. In practical applications, EI faces challenges related to computational power, power consumption, size, and cost, with the primary challenge being the trade-off between computational power and power consumption. This has rendered traditional computing platforms unsustainable, making heterogeneous parallel computing platforms a crucial pathway for implementing EI. In our research, we leveraged the Xilinx Zynq 7000 heterogeneous computing platform, employed High-Level Synthesis (HLS) for design, and implemented two different accelerators for LeNet-5 using loop unrolling and pipelining optimization techniques. The experimental results show that when running at a clock speed of 100 MHz, the PIPELINE accelerator, compared to the UNROLL accelerator, experiences an 8.09% increase in power consumption but speeds up by 14.972 times, making the PIPELINE accelerator superior in performance. Compared to the CPU, the PIPELINE accelerator reduces power consumption by 91.37% and speeds up by 70.387 times, while compared to the GPU, it reduces power consumption by 93.35%.This study provides two different optimization schemes for edge intelligence applications through design and experimentation, and demonstrates the impact of different quantization methods on FPGA resource consumption. These experimental results can provide a reference for practical applications, thereby providing a reference hardware acceleration scheme for edge intelligence applications.

RNA, as an important substance for regulating biological growth and development, has significant implications for visualization research. However, many spontaneously fluorescent substances in plants greatly interfere with the effectiveness of plant bioimaging. Aggregetion- induced emission luminogens (AIEgens), due to their luminescent properties, tunable molecular size, high fluorescence intensity, good photostability, and low cell toxicity, have been widely applied in the animal and medical fields. We have found that AIEgens have great potential as RNA fluorescent probes for efficient imaging in plants. In this review, we first introduce several common RNA labeling forms and point out their pros and cons. We briefly describe the development of AIEgens and the AIE mechanism, and then present various practical applications of AIEgens, including detailed examples of their use as biological markers. To further promote the application of AIE in the field of RNA, we suggest the use of AIEgens to modify target RNA via techniques such as click chemistry or CRISPR/Cas, to achieve RNA visualization in plants. highly possible to modify target RNA with AIEgens in vivo for RNA visualization.

Advanced high-strength steels (AHSS) have a wide range of applications in equipment safety and lightweight design, and enhancing the strength of AHSS to the ultra-high level of 2 GPa is currently a key focus. In this study, a new process of thermo-mechanical control process followed by direct quenching and partitioning (TMCP-DQP) is developed based on Fe-0.4C-1Mn-0.6Si (wt.%) low-alloy steel, and the effects of microstructure evolution on mechanical properties under TMCP-DQP process and conventional hot rolled quenched and tempered process (HR-QT) are comparatively studied. The results show that the TMCP-DQP process not only shortened the processing steps but also achieved outstanding comprehensive mechanical properties. The TMCP-DQP steel exhibits a tensile strength of 2.23 GPa, accompanied by 11.9% elongation and a Brinell hardness of 624 HBW, with an impact toughness of 28.5 J at -20 ℃. In contrast, the HR-QT steel exhibits tensile strengths ranging from 2.16 GPa to 1.7 GPa and elongations between 5.2% and 12.2%. The microstructure of TMCP-DQP steel primarily consists of lath martensite, containing thin-film retained austenite (RA), nanoscale rod-shaped carbides, and a minor number of nanoscale twins. The volume fraction of RA reaches 7.7%, with an average carbon content of 7.1 at.% measured by three-dimensional atom probe tomography (3DAP). Compared to the HR-QT process, the TMCP-DQP process results in finer microstructure, with a prior austenite grain (PAG) size of 11.91 μm, forming packets and blocks with widths of 5.12 μm and 1.63 μm. The TMCP-DQP process achieves the ultra-high strength of low-alloy steel through the synergistic effects of grain refinement, dislocation strengthening, and precipitation strengthening. The dynamic partitioning stage stabilizes the RA through carbon enrichment, while the relaxation stage reduces a small portion of the dislocations generated by thermal deformation, and the self-tempering stage eliminates internal stresses, all guaranteeing considerable ductility and toughness. The TMCP-DQP process may offer a means for industries to streamline their manufacturing processes and provide a technological reference for producing 2.2 GPa grade AHSS.

This research investigates the environmental characteristics of the saline lake in the Jiangling depression, southwestern Jianghan Basin from Paleocene to Eocene using bulk-rock geochemistry. The ratios of FeO/MnO, Al2O3/MgO and C-value indicate a semi-humid to semi-arid climate in the early-middle Paleocene. There was a rapid shift to a humid climate during the late Paleocene to early Eocene, following a short-time intense dryness. The Eocene climate was arid, but experienced intermittent humidity. The variation trend of CIA, CIW and PIA is similar to that of FeO/MnO, Al2O3/MgO and C-value, so the chemical weathering was influenced by climate changes. The redox conditions of lake in the Jiangling depression during Paleocene to Eocene were reconstructed using the ratios of U/Th, Ni/Co, and V/Cr. In the humidity and alternations of aridity and humidity, the lake water received external water input, resulting in weak stratification, so the sediments were in oxidation condition. In the aridity, lakes become a still water environments, leading to sediments formed in reduced condition. The salinity of the lake in Jiangling depression from Paleocene to Eocene was determined through the analysis of sedimentary sequences and the change of Sr/Ba ratio. In the early-middle Paleocene, the salinity of lake varied greatly. From the late Paleocene to the early Eocene, the salinity of lake decreased. In the Eocene, the salinity of the lake increased, and the halite precipitated, and finally the salinity of the lake decreased due to humid climate.

The latest experimental measurements of cosmic rays (CRs) have discovered a series of anomalies, including the hardening of the nuclear spectra at R ∼200 GV followed by softening at R ∼10 TV and complicated energy dependence of anisotropy from GeV to PeV. Recent works have demonstrated nearby sources are crucial for these anomalies of spectra and anisotropy. In this work, we analyze the contributions of five nearby sources within 1 kpc around solar system to the spectra and anisotropy, finally find out which source is the best candidate source. In the calculation process, we also introduce the anisotropic diffusion of CRs induced by the local interstellar magnetic field (LIMF) nearby the solar system based on spatial-dependent propagation (SDP) model. As a result, we find Geminga SNR source can simultaneously account for CR spectra and anisotropy, whereas the other sources can not . Measurements of CR anisotropy and spectra by experiments such as LHAASO and HAWC are expected to test this scenario in the near future.

Due to the low content, few studies are focused on the volatile compounds of Phlomoides rotata (Benth. ex Hook. f.) Mathiesen (PR, syn. Lamiophlomis rotata (Benth.) Kudô). However, such volatile compounds may have important pharmacological activities such as antioxidant, anticancer. In order to identify the chemical markers (CMs) in the essential oils (Es) and explore the potential bioactivities, we first conduct a thoroughly investigation on the volatile compounds and evaluate their anti-oxidant activities (AOAs), to the best of our knowledge. Light yellow Es with a fresh and elegant smell are obtained by hydro-distillation with an average yield of 0.11% (mL/g). After separation through cryoprecipitation, the crystals (Cs) and EOs removed crystals (RCs) were gotten, respectively. A total of 81 components are qualified and quantified in the Es, Cs and RCs, in which 44 ones are first reported from PR. As for content, the main compounds are long-chain fatty acids (LCFAs) and their esters. Among them, palmitic acid (PA), myristic acid (MA), linoleic acid (LA), oleic acid (OA) and methyl palmitate are highlighted, Besides, hexahydrofarnesyl acetone and phytol are also prominent Four kinds of C13-norisoprenoids are first reported from PR, in which, trans-β-damascenone is potent in flavour. In sum, these eight representative compounds can be chosen as the CMs. The AOAs of Es, Cs, RCs and four CMs such as PA, MA, LA and OA are evaluated by in vitro assays. In general, PA and MA present pro-oxidant activities (POAs) or weak AOAs. LA and OA show POAs or weak AOAs in lower concentration group, whereas demonstrate medium or strong AOAs in higher concentration group. Usually, the RCs demonstrate stronger AOAs and the Cs present weaker AOAs compared with those of the corresponding Es, which should be related to their different content of PA. This study can give some hints on the utilization of such Es which are abundant in LCFAs.

Fiber coupling efficiency is one of the key technical indicators of atmospheric laser communication, which directly affects the communication system BER. According to the optical fiber coupling efficiency model, the optical fiber coupling model under atmospheric slant link is established, and the relationship between wavelength, zenith angle, receiving aperture, altitude and coupling efficiency is studied through numerical simulation. Based on the principle of adaptive optics turbulence correction, the relationship between fiber coupling efficiency and adaptive optics order is established. A fast method for estimating the coupling efficiency based on Strehl ratio is proposed. According to the principle of laser communication system, the semi-physical simulation experimental system of atmospheric slant-range channel coupling efficiency is constructed, and the coupling efficiency test and analysis are completed.

In recent years, frequent occurrences of low temperature disasters due to global climate change have significantly impacted the normal growth of crops. Research has indicated that inorganic selenium (which is more toxic) can not only enhance the effects of low temperature stress but also increase selenium content on plants; however, there is a scarcity of studies investigating the impacts of organic selenium and nano-selenium on crops. In order to investigate whether organic selenium and nano-selenium can enhance low-temperature tolerance and increase selenium content in pak choi (Brassica chinensis var. pekinensis. cv. ‘Suzhouqing’), different concentrations (0, 5, 10, 20 mg L-1) of exogenous selenium were applied in this experiment to assess their effects on plant growth, nutritional quality and antioxidant properties. RNA-Seq technology was used to sequence the transcriptome of the leaves. Based on the transcriptome data, a Weighted Gene Co-expression Network Analysis (WGCNA) was employed to construct a network that associates with physiological traits related to stress resistance. Two highly correlated gene co-expression modules were identified, and within them, nine hub genes associated with endocytosis, antioxidant stress, absorption, transport, and metabolism of selenium were discovered. The results indicated that the beneficial effects on yield and total selenium content under low temperature were attributed to (1) protection of photosynthetic pigments for enhancing photosynthetic capacity by the up-regulation of LHca2, LHcb1, LHca1, LHcb4 in KEGG pathway: photosynthesis-antenna proteins; (2) activation of antioxidant system for efficient ROS homeostasis such as SOD, POD and CAT by the genes such as Superoxide dismutase, Monodehydroascorbate and (3) selenium absorption by endocytosis, seleninum transportation by ABC transporter gene family and selenium metabolism related genes such as Cysteine synthase, Glutaredoxin. These findings provide a foundation for further investigation into the molecular mechanisms underlying the effects of organic selenium and nano-selenium on cyanochloride production at low temperatures.

Abstract: In recent years, the concentration of fine particulate matter (PM2.5) in China has decreased significantly, whereas the concentration of surface ozone (O3) has increased. The formation regime of ozone is closely related to the ratio of volatile organic compounds (VOCs) to nitrogen oxides (NOx). To reveal the reasons for this increase in ozone, we determined the sensitivity of ozone generation by determining the regional threshold of the ratio of formaldehyde to nitrogen dioxide (HCHO/NO2) in the satellite troposphere. The different FNR(HCHO/NO2) ratio ranges indicate three formation regimes: VOC-limited, transitional, and NOx-limited. The range of the transitional regime plays a crucial role in identifying the regime of ozone formation. Currently, the key threshold for ozone generation in China remains unclear. Polynomial fitting models were used to determine the threshold range for the transitional regime in the BTH region [2.0,3.1]. The ozone formation regime in the BTH region mainly exhibited a transitional and NOx-limited regime, and the overall concentration changes of the HCHO and NO2 columns in the BTH region showed a fluctuating trend from 2019 to 2022. However, compared to 2019, the ozone precursors and FNR showed varying degrees of decline in 2022. The concentration changes of NO2 were high in winter and low in summer, whereas the trend of HCHO and FNR changes was the opposite to that of NO2, being high in summer and low in winter. The concentrations of HCHO and NO2 in the BTH region showed a trend of urban agglomeration areas>urban expansion areas>non-urban areas in different land types from 2019 to 2022, whereas the FNR showed an opposite trend in urban agglomeration areas<urban expansion areas<non-urban areas.

In the broad context of vulnerability detection, deep learning has achieved considerable progress but faces generalization challenges in multilingual environments . We introduce a novel approach named AST-FMVD, which leverages transfer learning and abstract syntax trees. By employing semantic similarity clustering and context-aware technology, the method constructs node mapping relationships between different languages, enabling zero-shot learning in vulnerability detection. The method was validated by applying Java's vulnerability detection model in the Python domain, successfully demonstrating that AST-FMVD retains the original model's detection capabilities in the target domain. In conclusion, the proposed method offers a promising solution to the inherent problems in multi-language vulnerability detection, signifying a potential leap in the application of deep learning, transfer learning, and abstract syntax trees for improved cross-domain performance.

Due to the low content, few studies are focused on the essential oils (EOs) of Phlomoides rotata (Benth. ex Hook. f.) Mathiesen (syn. Lamiophlomis rotata (Benth.) Kudô. This plant has been used to treat rheumatic arthritis and grasserie in China. However, such EOs may have important pharmacological activities such as anti-cancer. To identify the chemical markers (CM) in the EOs and evaluate their antioxidant activities (AAs), we firstly conduct a thoroughly investigation on their chemicals and AAs, to the best of our knowledge. Light yellow EOs with fresh and elegant smell are obtained by hydro-distillation with average yield 0.11% (volume mL/weight g). The crystals are separated from the EOs through cryoprecipitation, respectively. A total of 81 components are qualified and quantified in the EOs, crystals and EOs removed crystals, in which 44 ones are first reported. As for content, the main compounds are long-chain fatty acids (FAs) and their esters. The most abundant one n-hexadecanoic acid (palmitic acid, PA) accounting for 43.15-54.8%, 58.49-64.57% and 15.9-41.1%, in the EOs, crystals and EOs removed crystals, respectively. Seven compounds including PA, tetradecanoic acid, linoleic acid, oleic acid, methyl hexadecanoate, hexahydrofarnesyl acetone and phytol can be chosen a the CMs in these EOs. The AAs are evaluated through in vitro assays. PA presents pro-oxidant activities in a concentration dependence manner. Usually, the EOs removed crystals demonstrate stronger AAs, and the crystals demonstrate weaker AAs compared with that of the corresponding EOs, which is related to the different content of PA in these samples. This study can give some hints for the utilization of such EOs which are abundant in FAs such as PA.

Cultivated Peanut (Arachis hypogaea L.) is an important oil and cash crop in worldwide. Hundred pod and seed weight are important components for peanut yield. In order to dissect the genetic control of hundred pod weight (HPW) and hundred seed weight (HSW), a RIL population containing 188 individuals was developed from a cross between Jihua 5 (JH5, large pod and seed size) and M130 (small pod and seed size). An integrated genetic linkage map was constructed by using SSR, AhTE, SRAP, TRAP and SNP markers. The map contained 3,130 genetic markers which were assigned to 20 chromosomes and covered 1,998.95 cM with an average distance 0.64 cM. Based on the genetic map, a total of 31 QTLs for HPW and HSW were identified on 7 chromosomes, explaining 3.7-10.8% of the phenotypic variation by each QTL. Among these, seven QTLs were detected under more than two environments, two major QTLs were found on B04 and B08, respectively. A QTL hotspot containing seven QTLs was detected on chromosome A08 spanning a 2.74 cM genetic interval with 0.36 Mb physical map which included 18 candidate genes. Among these, Arahy.D52S1Z, Arahy.IBM9RL, Arahy.W18Y25, Arahy.CPLC2W and Arahy.14EF4H may be involved in regulating peanut pod and seed weight. These results may help further analysis of genetic mechanisms for pod and seed size in cultivated peanut.

The calibration of length is related to the national economy and people's livelihood. The traditional calibration of length value was sent the uncalibrated instrument to the laboratory and the intrinsic error of the tested instrument was obtained in the laboratory. However, calibrating the instrument in the site produced additional error. In this article, a remote calibration method of length measurement based on optical fiber information transmission following with a proof of principle system was studied to reduce the additional error. The 1.0-level displacement guide rail was calibrated according to this method. The results showed that the relative error of guide rail displacement under different lengths was within 0.6%. The expanded uncertainties of 10 μm, 100 μm and 1 mm were analyzed respectively. The calibration results meet the actual standards of the guide rail. This optical method is a good candidate for remote calibration.

In this paper, a sensitivity sensor of dual-core photonic crystal fiber (DC-PCF) filled with magnetic liquid is introduced and investigated by the finite element method (FEM). To regulate the energy coupling involving the two cores, the magnetic fluid is filled into the pore between the two cores. To adjust the coupling between the supermodes in the DC-PCF, the refractive index of the magnetic fluid-filled air hole may change due to the external magnetic field. This specifically created a magnetic fluid-filled DC-PCF, the magnetic fluid-filled hole is not used as the core for energy transmission, thus avoiding transmission loss. The dip wavelength and the magnetic field displayed an excellent linear connection between 80 and 260 Oe, depending on the numerical data. The detection sensitivity of the magnetic field reached 515.75 pm/Oe at a short fiber length of 482 m. The designed magnetic fluid-filled DC-PCF has high sensitivity and small volume and has great application prospects in medical and industrial field magnetic field detection.

Nonalcoholic fatty liver disease (NAFLD) is a liver metabolism-associated steatohepatitis caused by non-alcoholic factors. NAFLD is currently the most prevalent liver disease in the world, affecting one-fourth of the world's population, and its prevalence increases with age. There are no approved drugs specifically for the treatment of NAFLD, and one important reason hindering drug development is the lack of effective biomarkers. C-reactive protein (CRP), a marker of inflammation, has been linked to NAFLD and aging in recent studies. Coincidentally, hepatocytes are responsible for the major CRP production, and the levels of CRP increase with age. Therefore, CRP is not only a potential marker, but also acts as a key factor driving liver aging and NAFLD. Herein, we reviewed the biological function and production mechanism of CRP and the relationship between CRP and NAFLD. We also comprehensively described the potential molecular mechanisms of CRP-mediated signaling in aging-associated NAFLD. Finally, we proposed possible therapeutic approaches based on the mechanism of CRP signaling in the pathogenesis of NAFLD. We hope this study can provide new insights into the development of aging associated NAFLD biomarkers and suggest that modulation of CRP signaling is a potential therapeutic target.

Fusarium species are one of the filamentous fungal taxa with the most pronounced impact on agri-cultural production and human health. The mycotoxins produced by pathogenic Fusarium not on-ly attack various plants including crops, causing various plant diseases that lead to reduced yields and even death, but also penetrate into the food chain of humans and animals to cause food poi-soning and consequent health hazards. Although sporadic studies have revealed some of the bio-synthetic pathways of Fusarium toxins, they are insufficient to satisfy the need for a comprehen-sive understanding of Fusarium toxin production. In this study, we focused on 35 serious patho-genic Fusarium species with available genomes and systematically analyzed the ubiquity of the dis-tribution of identified Fusarium and non-Fusarium derived fungal toxin biosynthesis gene clusters (BGCs) in these species through the mining of core genes and comparative analysis of correspond-ing BGCs. Additionally, novel sesterterpene synthases and PKS_NRPS clusters were discovered and analysed. This work is the first to systematically analyze the distribution of related mycotoxin biosynthesis in pathogenic Fusarium species. These findings enhance the knowledge of mycotoxin production and provide a theoretical grounding for the prevention of fungal toxin production us-ing biotechnological approaches.

In this paper, the quality change of scallop (Patinopecten yessoensis) in the process of anhydrous storage and transportation after cold-acclimation and induced dormancy was studied, and the regulation mechanism of quality degradation in the storage and transportation in the process of gradient chilling stress and drying exposure was further explored. The results show that while being transferred from anhydrous storage and transportation from hydrous storage and transportation, the breathing pattern of scallops were changed from aerobic to anaerobic. Their gill filaments were altered, and the apparent vitality was constantly declining, which was reflected by the edge shrinkage of pallium and the direct proportion between the edge reduction rate and the stimulus response period. After being in the anhydrous state for 4d, the AEC value dropped to 67.59%. At this time, if they were under hydration again, they would resume a nice growth state. By virtue of proteomics, it was revealed from the analysis that cold acclimation and dry exposure mainly led to changes in biological functions and pathways such as mitochondrial inner membrane and ATP hydrolysis activity. In addition, it can be seen from the functional annotation and enrichment analysis of the metabolite KEGG that cold acclimation promoted the purine metabolism of scallops, while dry exposure inhibited the metabolism of saturated fatty acids. Besides, in this study, the infrared sensing mode was used for the first time to record the heart rate changes of the scallops during circulation, which provides feasibility for the nondestructive vitality monitoring of Lamellibranchia.

To predict the remaining useful life (RUL) of proton exchange membrane fuel cell (PEMFC) in advance, a prediction method based on the voltage recovery model and Bayesian optimization of a multi-kernel relevance vector machine (MK-RVM) is proposed in this paper. First, the empirical mode decomposition (EMD) method was used to preprocess the data, and then the MK-RVM was used to train the model. Then, the Bayesian optimization algorithm was used to optimize the weight coefficient of the kernel function to complete the parameter update of the prediction model, and the voltage recovery model was added to the prediction model to realize the rapid and accurate prediction of the RUL of PEMFC. Finally, the method proposed in this paper was applied to the open data set of PEMFC provided by FCLAB, and the prediction accuracy of the RUL of PEMFC was obtained by 95.35%, which showed that the method had good gen-eralization ability and verified the accuracy of the prediction for the RUL of PEMFC.

Sweet pepper is an important vegetable in the world. Bacterial leaf spot caused by the pathogen Xanthomonas perforans, is a limiting factor that significantly reduces the quality and yield of sweet pepper To control this disease, the use of chemical fungicides is currently the main disease control method. Thus, we want to develop an alternative method by using antagonistic microorganisms. Under this demand, Bacillus amyloliquefaciens PMB04 has strong antagonistic effects against pathogens and can inhibit the occurrence of diseases. B. amyloliquefaciens PMB04 has the potential for the development of a disease control product. Primarily, PMB04 revealed to contain a strong inhibitory effect against all isolated X. perforans strains. In the inoculation assay, the severity of bacterial spot disease on sweet peppers was reduced by PMB04 bacterial suspensions. To increase the convenience of field application for future prospects, the development of PMB04 fermentation liquid was carried out with different ratios of brown sugar and yeast extract in a 30-liter fermentation tank subsequently. Results exhibited that the fermentation liquid of 3-1 formula obtained the highest bacterial population in a 30-liter fermentation tank. The fermentation liquid of 0.5-0.5 formula was the most stable formula under two different conditions in terms of consistent bacterial population and sporulation. In addition, the 200-fold dilution of 3-1 and 0.5-0.5 fermentation liquids revealed best control efficacy on bacterial leaf spot of sweet pepper. Additionally, the results of the 0.5-0.5 fermentation liquid (PMB4FL) with different dilution concentrations also showed that the 200- and 500-fold dilutions had the best control efficacy. To understand the effect of commonly used copper-containing fungicides on sweet peppers on the application of microbial agent PMB4FL, the effects of copper hydroxide and tribasic copper sulfate on the growth of X. perforans strains and B. amyloliquefaciens PMB04 were assayed. The results exhibited that the above two fungicides did not have any inhibitory effect on the growth of PMB04, but had a strong inhibitory effect on the X. perforans strain. In the follow-up control experiment, the treatment of copper hydroxide had no synergistic effect with PMB4FL to control bacterial leaf spot. We concluded that the use of PMB4FL fermentation liquid alone on the leaves can effectively control the occurrence of bacterial leaf spot in sweet pepper crops.

The chitin synthase B gene is a key enzyme in the chitin synthesis of insect peritrophic matrix (PM), affecting insects' feeding behavior. The chitin synthase B gene has been cloned from the transcription library of Heortia vitessoides Moore. RT-qPCR showed that HvChsb was highly expressed in the larval stage of H. vitessoides, especially on the first day of the prepupal stage, and in the midgut of larvae and the abdomen of adults. After starvation treatment, HvChsb was found to be significantly inhibited with time. After 48 h of starvation, the feeding experiment showed that HvChsb increased with the prolongation of the refeeding time. The experimental data showed that feeding affected the expression of HvChsb. HvChsb was effectively silenced by RNA interference, so its function was lost, significantly decreasing the survival rate of H. vitessoides. The survival rate from larval-to-pupal stages was only 43.33%, accompanied by abnormal phenotypes. It can be seen that HvChsb plays a key role in the average growth and development of H. vitessoides.

The effects of 1%~5% cold compression on the mechanical properties, microstructure and residual stress of 7050 aluminum alloy were investigated, and the results were applied to the complex die forging with stiffener structure. The results show that with the increase of cold compression, the tensile strength of forging decreases gradually, but the conductivity and fracture toughness of the forging have little change. TEM microstructure shows that with larger cold compression (5%), the dislocation density was relatively higher, which promoted the precipitation and growth of precipitated phases at positions with higher dislocation density during aging process. The ultrasonic tests of residual stress show that with the increase of cold compression, the residual stress in the forging decreases first, and then increases when cold compression reaches 5%. The results of the die forging of 7050 aluminum alloy with bar structure show that the residual stress of the die forging is obviously eliminated after 2-4% cold compression, and the deformation after machining is obviously less than of the uncompressed forgings. The combination of bar and web is more beneficial to the uniform distribution of residual stress of the die forging with bar structure.

Aim: Aging is companied by deteriorations of insulin resistance (IR) and insulin secretion. However, little is known about the roles of aging on different phases of insulin secretion (ISEC); i.e., the first- and second-phase of insulin secretion (FPIS, SPIS) and glucose effectiveness (GE). Methods: Totally 169 individuals (43 men and 126 women) with the similar fasting plasma glucose (FPG: 90 mg/dL) and BMI (men: 23 kg/m2, women 22 kg/m2) were enrolled. IR, FPIS, SPIS, and GE were estimated using our previously developed equations shown below. Pearson correlation analysis was conducted to assess the correlations between age and four diabetes factors (DFs: IR, FPIS, SPIS and GE). The equations that are used to calculate the DF in the present study were built and published by our group. Results: The age of the participants ranged from 18- to 78-year-old. Men had higher FPIS but lower HDL-C levels than women (2.067±0.159, 1.950±0.186 μU/min and 1.130±0.306, 1.348±0.357 mmol/dl, accordingly). The results of Pearson correlation revealed that age was negatively related to IR and GE in both genders (IR: r = -0.39, p < 0.001 for men, r = -0.24, p < 0.003 for women; GE: r = 0.66, p < 0.001 for men, r = 0.78, p < 0.001 for women). In the meanwhile, FPIS was also only found to be negatively correlated with age in female (r = -0.238, p = 0.003). But there was no different with SPIS and age in both of genders. Conclusions: We have found that in Chinese with normal FPG level (90 mg/dl) and body mass index (men: 23 kg/m2, women: 22: kg/m2), age is negatively related to IR and GE in both genders. At the same time, only FPIS was found to be negatively related to age in women. The tightness of their relationships, from the highest to the lowest are, GE, FPIS and IR accordingly. The importance of GE should be re-evaluated. These results should be interpreted with caution because of the small sample size.

In order to reduce the influence of ground vibration generated by tractor during driving and operation on driving stability and driver ride comfort, this paper proposes a control method of tractor active seat suspension based on model predictive control. By establishing a 3-degree of freedom tractor active seat suspension model and a ground excitation input model, a new model predictive controller for the active seat suspension system is designed. The vertical acceleration of the seat center of mass, the seat suspension stroke and the tire dynamic displacement are optimized by limiting the dynamic deflection of the seat suspension and the active force output of the actuator. The control model of MPC tractor active seat suspension system is built and its performance is simulated and verified. The results show that compared with the passive seat suspension and the PID seat suspension, the tractor active seat suspension based on model predictive control (MPC) has better damping characteristics and improves ride comfort.

In this paper, we consider a reconfigurable intelligent surface (RIS)-assisted integrated satellite-high altitude platform-terrestrial networks (IS-HAP-TNs) that can improve network performance by exploiting HAP's stability and RIS's reflection. Specifically, the reflector RIS is installed on the side of HAP to reflect signals from the multiple ground user equipments (UEs) to the satellite. To aim at maximising system sum rate, we jointly optimize the transmit beamforming matrix at the ground UEs and RIS phase shift matrix. Due to the limitation of the unit modulus of the RIS reflective elements constraint, the combinatorial optimization problem is difficult to tackle it effectively by traditional solving methods. Based on this, this paper studies deep reinforcement learning (DRL) algorithm to achieve online decision making for this joint optimization problem. In addition, it is verified through simulation experiments that the proposed DRL algorithm outperforms the standard scheme in terms of system performance and execution time, and higher computing speed, making real-time decision making truly feasible。