This work aimed to develop an anionic cellulose nanofiber (CNF) bio-adsorbent from palm date tree waste and to investigate its removal efficiency against cationic methylene blue dye from contaminated water. Palm date pulp was first prepared from palm date leaves through acid hydrolysis using H2SO4, followed by hydrolysis in a basic medium using KOH, in which the process completely removed the components of hemicellulose, lignin, and silica. To obtain anionic CNF, the resulting pulp was further treated with H2SO4, followed by centrifugation. Biogel formation of the CNF suspension was promoted by sonication, where its removal efficiency of methylene blue dye was studied as a function of dye concentration, temperature, contact time, and pH value. Two equilibrium models, the Langmuir and Freundlich models were employed, and the Langmuir model was found to be consistent with the experimental data. The highest removal efficiency was obtained at 60oC and was 5mg/gm. Furthermore, several kinetic models were used to gain insight into the adsorption mechanism. The pseudo-second-order model provided an accurate description of the adsorption process, while the Elovich equation suggested a chemical reaction between methylene blue dye and CNF. The study’s findings were in agreement with the pseudo-second-order model, indicating general chemical reactions. The study indicates that CNF adsorbents derived from renewable natural waste sources such as palm date leaves can be effective in removing cationic contaminants such as methylene blue dye.

Despite copious research, the methods for assessing upper- and lower-limb motor coordination are limited. We devised a simplified evaluation method based on upper- and lower-limb motor coordination jumping and conducted a practical examination of the characteristics of the motion and applicability of the evaluation method. Overall, 88 high-school athletes with comparable competitive abilities were included in this study. The participants were divided into two groups based on their prior experience with motor coordination training (24 in the experienced group; 64 in the inexperienced group). First, a population proportion test was employed to assess the success rate of the four upper- and lower-limb motions in each task. This revealed significant difference between all tasks, except for the fourth motion, indicating that different motions have varying degrees of difficulty and that the combination of motions with differing difficulty coefficients can result in the creation of entirely new tasks with varying degrees of difficulty. Second, the experienced group demonstrated significantly superior performance compared to the inexperienced group by a t-test. These results confirmed that athletes (with the same level of competitive ability) trained in upper and lower limb motor coordination were able to excel in this evaluation method, confirming its validity.

Mercury contamination in the Amazon is a significant public health concern arising from both natural sources and intensive mining activities in the region. This metal is used to separate Au from sediments, forming an amalgam that facilitates the extraction of precious metals. Accordingly, this study aimed to address the following question: What is the impact of mining on mercury contamination in the animal and human populations of the Amazon? The overall objective of this study was to conduct a systematic review of the existing literature to identify gaps in geographic coverage and assess the impact of Hg contamination on human and animal populations in the Amazon region. Our hypothesis was that higher mercury concentrations in tissue samples would be found closer to the mining areas. We employed the PECO and PRISMA-ScR protocols to collect articles published between 2017 and 2023, selected based on criteria representing projected points on a map within the biogeographic boundaries of the Amazon. Mercury concentrations increase with trophic levels, reaching high values of 3.7 µg/g in the muscles of predatory fish and 34.9 µg/g in human hair. The average level of mercury in humans exceeds 6 µg/g, surpassing tolerance levels. Although mining regions show high concentrations of Hg, the highest incidence was observed among populations with fish-based diets. Research on fish is crucial for assessing the risk to human health, given that fish are the main source of protein in the region.

This study empirically analyzes the effectiveness of resource optimization utilizing artificial intelligence (AI) within cloud computing environments. It compares systems that have been transitioned from a Monolithic structure to Microservices Architecture (MSA) with those adopting a simple Rehost strategy, to validate the operational efficiency of two systems whose resource efficiency has been enhanced compared to traditional legacy systems. The research is based on systems that determined resource efficiency post-cloud migration using APM tools. It points out the limitations of traditional heuristic operation methods in resource optimization, which lead to issues such as application performance degradation, resource over-allocation, and increased operational costs. This study aims to overcome the conventional resource optimization standards that depended on the average peak usage of CPU and memory infrastructure, by introducing AI-based optimization tools, and applying on-premise standards to cloud and container environments to achieve resource optimization. The paper emphasizes the importance of resource optimization through AI-based automation tools, exploring the possibilities of resolving real-world application performance issues in cloud environments, reducing unnecessary resource usage costs, and cutting down on labor risks and operational expenses. Through this, it presents strategic directions on how AI technology can offer financial and operational advantages in managing cloud resources.

This study investigated changes in the average BMI of 5th and 6th grade elementary school students in Korea and provided foundational data to suggest the role of physical education for student health and set future directions. The 2019–2021 Physical Activity Promotion System (PAPS) of the Korean Ministry of Education was used. Data corresponding to 5th and 6th grade students (124,693 from 2019, 126,226 from 2020, and 117,809 from 2021) in 1,208 elementary schools in Korea were collected. The BMI was obtained by dividing weight by the square of height (㎏/m2). Repeated measures ANOVA was conducted for data analysis, and confidence intervals were modified through the Bonferroni correction for multiple comparisons. The Greenhouse-Geisser correction was used for effects test. The study findings are: First, the average BMI of 5th and 6th grade elementary school students in Korea increased significantly in 2021 compared to 2019 and 2020. Second, changes in the yearly average BMI showed a significant difference depending on gender and grade. Obesity among 5th and 6th grade elementary school students in Korea increased steadily in 2019–2021, which may be due to a decrease in students’ physical activity. Male students showed a steeper increase, regardless of grade.

The teaching and learning environment have changed significantly over the last decade with the integration of an increasing amount of information and communication technologies, especially in distance education due to global pandemics, total lockdowns, isolation, and quarantine periods. The number of numerous virtual and non-virtual tools involved in educational processes is growing day by day. In terms of technological innovations used in learning environments, many researchers and educators are trying their best to bring more creative ideas into the technology- based learning environments. Although higher educational institutions have greatly benefited from the growing number of hardware and software resources in the educational process, they have also faced some setbacks that have harmed the learning processes. These technologies have in turn complicated some of the processes in the learning atmosphere. Therefore, we take Spanish teaching course as an example to present the challenging smarter teaching and learning systems that higher educational institutions face today.

The performance of tax administrations (TAs) is usually described as their capacity to complete activities with the minimum of resources engaged. Accordingly, tax administration performance is a multifaceted phenomenon, and measuring and benchmarking its performance against other countries or regions remains a puzzle for researchers and practitioners. This paper introduces a new approach for measuring tax administration performance using the Composite I-Distance Indicator based on 11 individual performance measures from 35 European tax administrations over two consecutive years (2018-2019). The findings highlight Denmark and the Netherlands as exemplary models for tax administration, with “Revenue Collection” being identified as a crucial driver of excellence and “Operational Performance” (such as “e-filing” and “on-time filing”) forming critical aspects of TA efficiency. This approach can be valuable for policymakers, public administration analysts, and other stakeholders interested in assessing tax administration efficiency across countries or similar problem areas requiring integrated performance indicators.

In order to improve the yield of the therapeutic agent N-methylsansalvamide (SA), optimization of stationary liquid fermentation conditions was carried out on an endophytic strain, Fusarium sp. R1, at flask level. Using a One-Factor-At-a-Time approach, the fermentation conditions for SA production were determined as follows: fermentation time of 13 d, 24 oC, initial pH of 6.5, seed age of 24 h, inoculum size of 5.0% (v/v), loading volume of 50% (v/v), 20.0 g/L salinity, and sucrose, tryptone, and yeast extract were found to be the best sources of carbon and nitrogen. Using response surface methodology, the optimal medium compositions consist of 22.5 g/L sucrose, 16.5 g/L tryptone, and 0.024 g/L yeast extract. Verification tests suggested that the SA yield under these optimal conditions reached up to 536.77 ± 2.67 mg/L, which was increased by almost ten times the initial yield (54.05 ± 3.45 mg/L). The findings indicate that a high SA production yield can be achieved by static culture of strain R1 under the proper fermentation conditions using a low-cost medium. This study paves the way towards industrial-scale SA production by strain R1 for new drug development.

The voltage-gated potassium channel KV1.3 has been recognized as a tumor marker and represents a promising new target for the discovery of new anticancer drugs. We designed a novel structural class of KV1.3 inhibitors through structural optimization of benzamide-based hit compounds and structure-activity relationship studies. The potency, and selectivity of the new KV1.3 inhibitors were investigated using whole-cell patch- and voltage-clamp experiments. 2D and 3D cell models were used to determine antiproliferative activity. Structural optimization resulted in the most potent and selective KV1.3 inhibitor 44 in the series with an IC50 value of 470 nM in oocytes and 950 nM in Ltk cells. Kv1.3 inhibitor 4 induced significant apoptosis in Colo-357 spheroids, while 14, 37, 43, and 44 significantly inhibited Panc-1 proliferation.

The article presents the results of the technical-economical study regarding the optimization of the FDM parameters (Lh – the height of the layer deposited in one pass and Id – the filling percentage) for the manufacture of PETG and ASA parts. To carry out the technical-economical study, we used the fundamental principle of value analysis, which consists in maximizing the ratio between Vi/Cp, where Vi - represents the mechanical characteristic, and Cp - represents the production cost. The results of the study show that for the tensile specimens made of PETG, the parameter that significantly influences the results of the Vi/Cp ratios is Lh, and in the case of the compression specimens made of PETG, the parameter that significantly influences the results of the Vi/Cp ratios is Id. In the case of specimens manufactured by FDM from ASA, the parameter that decisively influences the results of the Vi/Cp ratios of the tensile and compression specimens is Id – the filling percentage. By performing optimization of the process parameters with multiple responses, we identified the optimal parameters for FDM manufacturing of parts from PETG and ASA: Lh = 0.20 mm and Id = 100%.

We investigate perovskite oxides from different aspects, namely their pseudoharmonic dynamical properties, their dynamical properties when strong anharmonicity exists and the intriguing functionalities arising from domain walls. Taking these viewpoints together yields a rather complex picture of this material class which was not anticipated in previous approaches. It opens pathways to novel applications and reveals the rich ground states beyond the fictitious belief in ‘simplicity of perovskites and such structures’.

This systematic literature review meticulously explores the complexities of technological innovation and entrepreneurship, with a particular focus on the strategies and management practices involved in new product development from an interdisciplinary standpoint. By conducting an extensive analysis of 323 key articles from 11 top-tier journals published between 2020 and 2023, the review delineates the current research trajectories within these fields, underscoring significant scholarly interest and development. The study particularly emphasizes the emergence of artificial intelligence-generated content technology since 2022 and critically assesses its influence on innovation processes and product development practices among both nascent entrepreneurs and well-established corporations. This emergent technology's role in shaping the competitive landscape and its potential to drive significant shifts in market dynamics are thoroughly examined.

In the extended malfatti problem, the numbers of circles in the triangle are triangle numbers, because the tangency properties among the internal circles and 3 sides of the triangle have special type of structure. That is, the corner circle tangent to two sides of the triangle and two boundary circles, the boundary circles tangent to one side of the triangle and 4 other circles, and the inner circles always tangent to 6 other circles. The circles we find in extended general Malfatti’s problem has the property that the smallest radius and the largest radius for the circle has big difference. In this paper, we proposed algorithms to solve the problem that the tangency properties among circles and sides of triangle is not fixed, so that the number of circles in the triangle is not necessary a triangle numbers. The purpose of this change is try to find the radii of the circles in the triangle is within a small range.

This paper investigates an Energy Neutral System using Micro Energy Harvesters for a Health Monitoring Wireless Sensor Node (HM-WSN). We have implemented HM-WSN consisting of a solar cell energy harvester, a Power Management Unit (PMU) and the ucontroller, sensor and transmitter acting as load. A battery extender and a switching logic circuit for sensor node is designed to evaluate the efficiency of the proposed system. The HM-WSN senses body temperature with improvement in lifetime of coincell. The HM-WSN is built using commercially available off the shelf (COTS components and consumes 47.2uW for data being updated every 134s. It can be operated for approximately 1.32 years only on a coincell. Furthermore, the HM-WSN can be operated with solar energy at 200lux, achieving 96.36 years with a combination of a coincell with an additional capacitor of 2.2mF. It attains 4.07 years to 16.87 years lifetime with the load capacitor varying from 1mF to 1.5mF at 350lux lighting condition. With the same ambient condition and a 2mF load capacitor, HM-WSN attains complete energy autonomy.

Globally, rotavirus group A (RVA) remains a major cause of severe childhood diarrhea, despite the use of vaccines in > 100 countries. RVA sequencing for local outbreaks facilitates investigation into strain composition, origins, spread, and vaccine failure. In 2018, we collected 248 stool samples from children aged <13 years admitted with diarrheal illness to Kilifi County Hospital, coastal Kenya. Antigen screening detected RVA in 55 samples (22.2%). Of these, VP7 (G) and VP4 (P) segments were successfully sequenced in 48 (87.3%) and phylogenetic analysis based on the VP7 sequences identified seven genetic clusters with six different GP combinations; G3P[8], G1P[8], G2P[4], G2P[8], G9P[8] and G12P[8]. The G3P[8] strains predominated the season (n=37, 67.2%) and comprised three G3 genetic clusters that fell within Lineage I and IX (the latter also known as equine-like G3 lineage). Both two G3 lineages have been recently detected in several countries. Our study is the first to document African children infection with G3 lineage IX. These data highlight the global nature of RVA transmission and the importance of increasing global rotavirus vaccine coverage.

Background: Breast cancer is the most common cancer among women worldwide and remains the leading cause of death among Italian women. Despite increased breast cancer awareness and improved diagnostic techniques, mortality rates remains high globally. In Italy, despite the availability of screening programs by the National Health System (NHS) for all Italian women aged 50-69 every two years, the participation rate remains relatively low. The low uptake of screening may be attributed to a lack of general cancer knowledge among women, including awareness of risk factors, symptoms, and prevention measures. This study investigates the knowledge and misinformation in a population of Italian women regarding breast cancer risk factors, symptoms, and prevention. Methods: From March 2021 to January 2022, we conducted a survey targeting the female population in Italy, with a total of 2375 participants willingly participating in the study. To investigate factors linked to variations in attitudes toward breast cancer, the participants were categorized into two groups: the general population (Group A, n=2235) and women who have had or currently have breast cancer (Group B, n=140). Statistically significant differences were identified between these two groups. Results: The findings revealed considerable confusion regarding both the symptoms and causes associated with cancer, as well as prevention measures. This confusion was particularly prominent among women in the general population and those with lower levels of education. Conclusions: Given these insights, it remains crucial to promote accurate health information concerning risk factors, symptoms, and prevention strategies related to this devastating disease, emphasizing the ongoing importance of disseminating correct health information.

There has recently been discussion regarding how heritage rural areas are culturally affected by recent urban – rural migration. However, little research has been done into the form this process takes in post-communist contexts. Taking a geography approach to some Romanian heritage sites, this study foregrounds narratives based on interviews with local people in two villages in southern Transylvania that were formerly inhabited by different ethnicities. The results point to quite different perceptions of cultural landscape change in the two villages. Although both communities consciously seek to preserve and maintain a sense of place that is rooted in history, those who migrate from urban areas to these rural heritage places represent a catalyst for community resilience and development in areas such as acquisition of buildings, development of facilities, modern social services, and seeking new funding for landscape transformation. As NGOs function as a link between government, local people, newcomers to the community, and investors, we contend that more attention could be paid to channelling their funds towards investment in rural heritage. The greatest challenges to heritage are those posed by tourism, while NGOs and small investors are the driving force that helps to preserve and save cultural heritage.

Recent studies in rural heritage tourism have highlighted that an evolutionary economic geography perspective could be helpful in determining whether cultural heritage tourism could stand as a branching-innovating trajectory. Its evolution can be understood by presenting specific mechanisms of layering, recombination and conversion that leads to path development. We contribute to rural heritage tourism by basing our study on perceptions of tourists and local officials on the Rudăria Watermills, Romania. Based on survey and interview data, we document the strengths and limits of local watermills for tourism and describe the entrepreneurial agents involved in path development. Our findings point to the important role played by a local NGO in developing a path for tourism for the watermills, as well as the active involvement of local authorities and other local cultural leaders for including the mills in national and international tourism circuits.

The management of vision-threatening retinal diseases remains challenging due to the lack of an effective drug delivery system. Encapsulated cell therapy (ECT) offers a promising approach for the continuous delivery of therapeutic agents without the need for immunosuppressants. In this context, an injectable and terminable collagen-alginate composite (CAC) ECT gel, designed with a Tet-on pro-caspase-8 system, was developed as a safe intraocular drug delivery platform for the sustained release of glial cell line-derived neurotrophic factor (GDNF) to treat retinal degenerative diseases (RDDs). This study examined the potential clinical application of the CAC ECT gel, focusing on its safety, performance, and termination through doxycycline (Dox) administration in the eyes of healthy New Zealand White rabbits, as well as its therapeutic efficacy in rabbits with sodium iodate (SI)-induced retinal degeneration. The findings indicated that CAC ECT gel can be safely implanted without harming the retina or lens, displaying resistance to degradation, facilitating cell attachment, and secreting bioactive GDNF. Furthermore, the GDNF levels could be modulated by the number of implants. Moreover, Dox administration was effective in terminating gel function without causing retinal damage. Notably, rabbits with retinal degeneration treated with the gels exhibited significant functional recovery in both a-wave and b-wave amplitudes and showed remarkable efficacy in reducing photoreceptor apoptosis. Given its biocompatibility, mechanical stability, controlled drug release, terminability, and therapeutic effectiveness, our CAC ECT gel presents a promising therapeutic strategy for various retinal diseases in a clinical setting, eliminating the need for immunosuppressants.

This study is a retrospective analysis aimed to understand the incidence and risk factors of proximal junctional kyphosis (PJK) following long instrumented spinal fusion from L1 to the sacrum in patients with mild to moderate sagittal imbalance. It recruited consecutive patient undergone instrumented fusion from L1 to the sacrum for degenerative lumbar disease between June 2006 and November 2019 in a single institution. The patients’ preoperative clinical data, muscle status at T12-L1 on magnetic resonance images, and sagittal spinopelvic parameters were analyzed. Univariate analysis was used to compare clinical and radiographic data between PJK and non-PJK patients. Logistic regression analysis was used to investigate the independent risk factors for PJK. A total of 56 patients were included in the study. The mean age at surgery was 67.3 years and mean follow-up period was 37.3 months. Seven were male and 34 were female. PJK developed in 23 (41.1%) out of 56; of these patients, 20 (87.0%) developed PJK within postoperative 1 year. On univariate analysis between PJK and non-PJK patients, PJK group showed more frequent osteoporosis, lower body mass index, smaller cross-sectional area (CSA) and more fat infiltration (FI) in erector spinae muscle at T12-L1, larger preoperative TLK and PT with statistical significance (p<0.05). On logistic regression analysis, severe (>50%) FI in erector spinae muscle (OR=43.60, CI 4.10-463.06, R2N =0.730, p=0.002) and osteoporosis (OR=20.49, CI 1.58-264.99, R2N =0.730, p=0.021) were statistically significant. Preexisting severe (>50%) fat infiltration in erector spinae muscle and osteoporosis were significant independent risk factors associated with PJK following instrumented fusion from L1 to the sacrum, but age was not a risk factor.

This study focuses on examining various approaches for Tensor Decompositions (TDs) and their potential applications in satellite imaging (SI) and deep learning (DL). The research highlights how these decompositions can contribute to the advancement of SI and DL, providing valuable insights for future utilization of TDs in research. It explores how these techniques contribute to the advancement of SI and DL methods, providing insights into their potential applications and suggesting future research directions. The study aims to enhance the use of TDs techniques to further advance research efforts in these fields. More importantly, the current investigation offers a thorough analysis of the potential advantages and reasons for employing TDs techniques in different domains, including satellite imaging and deep learning. The aim is to enhance research outcomes by utilizing TDs. The review also identifies unresolved issues and proposes future directions for further investigation in this field. Fundamentally, these proposed open problems will open new grounds to the research community to articulate, innovate, and provide more real-life applications to improve the current state of the art by delving into a wider vision for a higher-level performance of both satellite imaging (SI) and deep learning (DL). Looking at the bigger scenario, this also suggests that TDs could be potentially employed to revolutionize existing machine learning technologies as well as the current space AI industry.

Clostridioides difficile is a Gram-positive pathogen known for its toxin production and spore formation. It is primarily responsible for most cases of antibiotic-associated diarrhea. Bacterial persisters are a small subset of the population that exhibits transient tolerance to bactericidal substances, and they are of significant medical concern due to their association with the emergence of antibiotic resistance and difficult-to-treat chronic or recurrent infections. Vancomycin, the predominant antibiotic utilized in the management of C. difficile infection, is extensively applied in the realm of clinical practice. Previous studies have demonstrated a persister-like phenotype with treatments involving this antibiotic. However, the mechanism in C. difficile remains largely unknown, primarily due to the challenge of isolating this small population at any given time. To better characterize C. difficile persister cells, we present a study that enables the enrichment and characterization of persister cells from bacterial cultures in both exponential and stationary phases. Moreover, we could differentiate between triggered (induced by antibiotics, such as vancomycin) and spontaneous (stochastic) persister cells. Additionally, we observed the involvement of toxin-antitoxin systems and Clp proteases in persister cell formation.

The assessment of Photovoltaic (PV) systems, a key component of sustainable energy solutions, is of paramount importance in the pursuit of a greener future. This abstract provides an overview of environmental assessments associated with PV systems, considering their life cycle, energy production, and ecological impact. The study explores various methodologies and tools employed in the evaluation of PV systems’ environmental performance, addressing issues such as material sourcing, manufacturing, installation, and end-of-life disposal. Additionally, it delves into the trade-offs and challenges in achieving sustainability objectives in the solar energy sector. By critically examining the environmental implications of PV systems, this research contributes to informed decision-making and the sustainable integration of solar power into our energy landscape.

Landslides, resulting from disturbances in slope equilibrium, pose a significant threat to landscapes, infrastructure, and human life. Triggered by factors such as intense precipitation, seismic activities, or volcanic eruptions, these events can cause extensive damage and endanger nearby communities. A comprehensive understanding of landslide characteristics, including spatio-temporal patterns, dimensions, and morphology, is vital for effective landslide-disaster management. Existing Remote Sensing approaches mostly use either optical or Synthetic Aperture Radar (SAR) sensors. Integrating information from both these types of sensors promises greater accuracy for identifying and locating landslides. This study proposes a novel approach, the ML-LaDeCORsat (Machine Learning-based coseismic Landslide Detection using Combined Optical and Radar Satellite Imagery), that integrates freely available Sentinel-1, Palsar-2, and Sentinel-2 imagery data, along with relevant spectral indices and suitable bands using machine-learning-based classification for coseismic landslide detection implemented in Google Earth Engine (GEE). The approach includes a robust and reproducible training and validation strategy. Using landslides from four different earthquake case studies, we demonstrate the superiority of our approach over existing solutions in coseismic landslide iden-tification and localization, providing a detection accuracy of 87-92%. ML-LaDeCORsat can be adapted to other landslide events (GEE script is provided). Transfer learning experiments proofed that our model can be applied to other coseismic landslide events without the need for additional training data. Our novel approach therefore facilitates quick and reliable identification of co-seismic landslides, highlighting its potential to contribute towards more effective disaster management.

Acrylates and methacrylates are widely used, especially in the dental industry, but can cause adverse skin reactions. These compounds, including 2-hydroxyethyl methacrylate, triethylene glycol dimethacrylate, and bisphenol A-glycidyl methacrylate, are strong contact irritants or allergens. Found in dental prostheses, composite resins, dentin bonding materials, and glass ionomers, they pose a higher risk of exposure for dental personnel. Clinically, acrylate allergies manifest as facial rashes, eczema with cracked skin on fingers (pulpitis), nail dystrophy, and periungual dermatitis. Recently, the highest frequency of allergic reactions to acrylates has shifted from dentistry to the beauty industry due to increased use in artificial nails, eyelashes, and hair extensions. This has led to greater sensitization. Acrylates are also used in medical applications, such as bone cement for orthopedic endoprostheses, soft contact lenses, hearing aids, histological preparations, and wound dressings, which can also cause allergic reactions. Severe dermatitis from surgical glue containing acrylates has been documented, and diabetic medical devices are potential sources of allergic contact dermatitis. Given the extensive use and prolonged skin contact of products containing acrylates and methacrylates, this review aims to present current knowledge and literature on reactions to these compounds across different industries.

The number of XLPE cables being used near or beyond their designed lifespan is increasing. The importance of timely cable replacement is increasing. Therefore, research is actively being conducted using VLF Tan δ diagnostic technology to assess the insulation condition of cables. There is a lack of studies measuring and analyzing VLF Tan δ of service aged XLPE cables. Additionally, there is a lack of research considering the operating environment. Therefore, research is needed to diagnose and analyze the insulation condition of the same serviced aged cable when it is operated in a different environment. This paper evaluates and analyzes the insulation condition of cables installed in the BFP, cooling tower, and deaerator booster pump of a combined heat and power plant. Each cable was analyzed by measuring VLF Tan δ, dielectric breakdown test of the cable, and tensile strength, elongation at break, crystallinity, and dielectric strength of XLPE specimens. Additionally, the correlation between VLF Tan δ and other characteristics was also analyzed. It was found that degradation progressed in the order of BFP, cooling tower, and deaerator booster pump. Therefore, it was confirmed that even for the same cable, deterioration varies depending on the installation location.

Concrete contributes 8% of all global carbon emissions making the need to find substitute critical for environmental sustainability. Research has indicated the potential for recycled plastics to be used as concrete substitutes. This study extends existing research by investigating the use of polycarbonate (PC) in plastic sand bricks as a mechanical equivalent to concrete. PC has high compressive strength, durability, impact strength, thermal resistivity, clarity, fatigue resistance, and UV resistance. This work provides a method and mold to produce a matrix of sand-plastic sample compositions with dimensions adhering to ASTM D695 standard for compressive properties of rigid-plastic. Compositions of 0% (control), 20%, 30%, 40%, and 50% sand by weight were tested. Samples were tested for compressive strength until yield and stress-strain behaviors plotted. The results for 100% PC demonstrated an average and maximum compressive strength of 71 MPa and 72 MPa, respectively. The 50% PC and 50% sand composition yielded an average and maximum compressive strength of 71 MPa and 73 MPa respectively with an increase in compressive stiffness, and transition to shear failure resembling cement. With a composite density of 1.86 g/cm3 against concrete’s average 2.4 g/cm3, and a compressive strength exceeding commercial concrete demands of 23.3 MPa to 30.2 MPa, this lightweight alternative meets the strength demands of concrete, reduces the need for new construction materials, and provides an additional recycling opportunity for nonbiodegradable waste plastic.

In this work is proposed a new unsupervised method to evaluate the behavior of urban green areas in presence of heatwave scenarios analyzing the NDVI, NDMI and LST satellite data. To evaluate how these three indices characterize urban green areas during periods of heat waves, a reclassification of the data raster of each index is carried out. Rather than using standard classifications of the three indices, an unsupervised classification approach is proposed that uses the Elbow method to determine the optimal number of classes and the Jenks thematic classification method. Each class is assigned a Gaussian fuzzy set with means and standard deviations equal to that of the associated thematic class. The green urban areas are classified using zonal statistics operators and the degree of membership in the corresponding fuzzy set is used to assess the reliability of the classification. Finally, for each type of greenery the frequencies of belonging to the NDVI, NDMI and LST classes are analyzed to evaluate the behavior of the type of urban greenery during heatwaves. The framework was tested in an urban area consisting of the city of Naples (Italy). The results show that some types of greenery, such as deciduous forests and olive groves, are not very vulnerable to heatwave scenarios, unlike uncultivated areas which, instead, show critical behaviors during heatwaves.

The recent consecutive economic and social crises impose sustainable “form farm to fork” food chain management to feed the global population. In this study we investigate young consumers (Gen Z) price perceptions in purchasing foods in Greece to find out the determinants ensuring sustainable, future food consumption. We used 8 overall price perceptions determinants, 5 with negative roles namely value & price consciousness, coupon & sales proneness, price mavenism and 3 with positive roles namely price-quality, price-value, and prestige-sensitivity for the formation of the study’s questionnaire. A total of 514 students (Gen Z by 85%) answered the questionnaire, promoted through the Google platform during September and October 2023. Data was analyzed with statistical tools, combining cross and chi-square tests. Between the negative determinants the “value consciousness” price perceptions (71.02%) were the most important parameters in purchasing food, followed by “price consciousness” (55.02%) parameters. “Coupon proneness” by 48.4% and “sales proneness” by 49% parameters were equally lower to the participants’ references, while “price mavenism” parameters were minimally preferred by only 26.4% by the participants. Participants exhibited major preference for “value to price” interconnection (66.7%) such as for good value for money, value exceeding its price, overvalued low priced foods, while their preference for “quality to price” interconnection was significantly lower (48.8%) such as for getting what you pay, more money for better quality, priced quality foods. The “prestige- sensitivity” price perception was out of their preference for food purchase (only 7.1%). Our findings indicate that young consumers (Gen Z) pay more attention to the value negative and positive parameters concerning price perceptions for food purchase rather than quality, coupons & sales, low price, and mavenism or even prestige of the foods. This means that value issues such as the perceived environmental impact (green value), the climate crisis, the social signaling potential and others are high in their concerns for their future including their price perceptions for food purchase.

Abstract: Background: With the growing trends in recreational marijuana use, our study aims at analyzing the association between Acute coronary syndromes (ACS) and Ventricular Fibrillation (Vfib) and cannabis use disorder in young adults (18 – 45) Methods: National In-patient Sample was used for population analysis. Probit logistic regression was used for analyzing the associations between diagnosis of ACS/ Vfib and documented cannabis use disorder. Propensity Score matched samples were made from the ACS/Vfib admissions with Cannabis use disorder to analyze the in-hospital outcomes. Results: Statistically significant association was found between admission diagnosis of ACS/ vfib, and documented cannabis use disorder in the study population. The association remained sig-nificant after accounting for potential confounders. Documented race as black, documented di-agnosis of uncontrolled hypertension and diabetes were found to have significant association with admissions for ACS among the population with documented Cannabis use disorder. No difference in mortality were found between ACS admissions with and without documented cannabis use disorder in the propensity matched cohorts. Conclusions: Documented diagnosis of Cannabis use disorder has statistically significant associ-ation with admission diagnosis of ACS/Vfib even after accounting for confounders. Documented race as black, and co existing diagnosis of uncontrolled hypertension and diabetes had significant association with admission diagnosis of ACS in population with documented cannabis use dis-order. Keywords: Cannabis use disorder; ACS; Ventricular fibrillation

The design of a mixed-mode proportional-integral-derivative (PID) controller circuit using current-feedback operational amplifiers (CFOAs) as active components is proposed. With the same circuit topology, the proposed configuration of three CFOAs, four resistors, and two capacitors is capable of performing the PID controller in all four operation modes: namely voltage mode, trans-admittance mode, current mode, and trans-impedance mode. Numerous mathematical analyses are conducted to determine the controller performance under ideal and non-ideal conditions. Additionally, the mixed-mode second-order lowpass filter is suggested, and also used to examine the workability of the proposed mixed-mode PID controller in a feedback control structure. The proposed PID controller is implemented with the commercially available IC-type CFOA AD844, and the simulation results are presented to illustrate the functionality of the controller and its closed-loop control system.

Abstract: Exercise has been repeatedly shown to be safe and beneficial for cancer survivors. However, there is no normative guideline for exercise prescription, and it is under exploration. Therefore, this literature review aims to provide some advice for the formulation of exercise prescriptions for patients with breast cancer-related lymphedema (BCRL) from the perspective of reducing lymphedema severity. A review of relevant studies published before November 2023 was conducted using three scientific databases PubMed, Embase, and Scopus. A total of 2696 articles were found. Eventually, 13 studies fulfilled the inclusion criteria and were included in this literature review. We concluded daily, or nearly daily exercise at home can be recommended. Moreover, reduced lymphedema severity may not be maintained after ceasing the exercise program, so exercise should be a lifelong practice.

Natural hazards such as earthquakes take place around the world and when combined with humans create natural disasters. Earthquakes, a form of natural hazard, have, in recent years, caused damage and destruction in many rural areas due to the lack of sustainability in political, economic, social, physical and operational criteria. Thus, to overcome the damage caused by earthquakes in rural areas, an assessment of sustainability status seems necessary to plan and strengthen in relation to the status of sustainability indicators. Data collection was performed through field methods and questionnaires. To test the hypothesis, T statistical methods, correlation method and F-test were performed using SPSS software (V22.0, IBM Corporation, Armonk, NY, USA). The results of the study showed that villages were at a low and undesirable level for all aspects, except social index in terms of sustainability. Comparisons showed that there was a significant mean difference among villages in terms of sustainability. The multi-criteria decision-making analysis has been considered and applied to a ranking of villages in terms of sustainability against the hazard of earthquakes. Finally, in order to improve the sustainability indicators of villages, some strategies have been presented.

Automatic garments design class identification for recommending the fashion trends is important nowadays because of the rapid growth of online shopping. By learning the properties of images efficiently, a machine can give better accuracy of classification. Several methods, based on Hand-Engineered feature coding exist for identifying garments design classes. But, most of the time, those methods do not help to achieve better results. Recently, Deep Convolutional Neural Networks (CNNs) have shown better performances for different object recognition. Deep CNN uses multiple levels of representation and abstraction that helps a machine to understand the types of data (images, sound, and text) more accurately. In this paper, we have applied deep CNN for identifying garments design classes. To evaluate the performances, we used two well-known CNN models AlexNet and VGGNet on two different datasets. We also propose a new CNN model based on AlexNet and found better results than existing state-of-the-art by a significant margin.

Headache is considered to be one of the most common causes of medical treatment and evaluation worldwide in both acute and outpatient settings. It is the most common neurological symptom seen worldwide affecting all genders, ages, ethnicities, and socioeconomic levels. It’s impact is noted in educational decline in school-aged children and decreased productivity through sick leave in adults. Its overall burden is well documented in well-resourced countries but limited data is seen low resourced countries. While many underlying causes bring about secondary headaches, primary headaches and more specifically migraines have been more widely explored. Migraines have a distinct criterion that is inclusive of one day duration (4 hours to 7 days, unilateral distribution, nausea and vomiting and disability as a few examples. However, migraines can vary and proper documentation through a migraine diary can help to guide treatment. Management of migraines can vary. Lifestyle modification is a key factor in the overall prevention and reduction of triggers in migraines. In addition to this, pharmacotherapy can be given in a tier-based approach based on overall severity and frequency of the migraine. Interventions have progressed from botox injection and have seen the advent of new medications such as nasal sprays to novel formulations of pre-existing drug formulations. Nonetheless, there is great room for further studies of headaches and migraines. Research specifically in low-resource countries can prove to beneficial.

The management of brain tumors presents numerous challenges, despite the employment of multimodal therapies including surgical intervention, radiotherapy, chemotherapy, and immunotherapy. Owing to the distinct location of brain tumors and the presence of the blood-brain barrier (BBB), these tumors exhibit considerable heterogeneity and invasiveness at a histological level. Recent advancements in hydrogel research for the local treatment of brain tumors have sought to overcome the primary challenge of delivering therapeutics past the BBB, thereby ensuring efficient accumulation within brain tumor tissues. This article elaborates on various hydrogel-based delivery vectors, examining their efficacy in the local treatment of brain tumors. Additionally, it reviews the fundamental principles involved in designing intelligent hydrogels that can circumvent the BBB and penetrate larger tumor areas, thereby facilitating precise, controlled drug release. Hydrogel-based drug delivery systems (DDSs) are posited to offer a groundbreaking approach in addressing the challenges and limitations inherent in traditional oncological therapies, which are significantly impeded by the unique structural and pathological characteristics of brain tumors.

We propose a novel moving median estimator specifically designed for online detection of threshold crossings in multi-channel signals, such as extracellular neural recordings. This estimator offers two key advantages: a reduced sensitivity to outliers and the elimination of memory requirements for storing arrival times. Furthermore, its design facilitates parallel implementation on FPGAs, making it ideal for real-time processing of multi-channel recordings.

Objective: This study aims to investigate the relationship between sports psychological capital, coach leadership behavior, and satisfaction among middle school students in the 2023 sports college entrance examination in Chongqing. Methods: Using the structural questionnaire design, this paper carries out a questionnaire survey on the candidates who come to participate in the volleyball specialty college entrance examination in Chongqing, the corresponding database was established and the data were statistically processed by spss21.0 and amos18.0. Results: 1) there was a significant positive correlation between sports psychological capital, coach leadership behavior and examinees satisfaction; 2) sports psychological capital and coach leadership behavior had a certain influence on five dimensions of examinees' personal treatment, personal performance, team integration, team interaction and support from relatives and friends; 3) The sense of self-efficacy in sports psychological capital and coach's leading behavior are the most important to examinees' satisfaction; 4) Both coaches' leadership behavior and sports psychological capital can directly affect examinees' satisfaction, but sports psychological capital is the most important. It can not only directly affect examinees' satisfaction, but also act as an intermediary between coaches' leadership behavior and examinees' satisfaction. Conclusion: Sports College Entrance Examination Students can improve training satisfaction and sports performance by strengthening sports psychological capital training and perceiving coach's leadership behavior; In the leadership behavior of coaches, we should emphasize training and appropriately weaken authoritative teaching, while the training of sense of hope and toughness should be highlighted in sports psychological capital.

Multilayered metallic sheets fabricated by hot metal forming processes are attractive structural components in the aerospace and automobile industry. The strength of the mechanical bond between the different layers is critical to the applicability of such components in load bearing applications. While it is well understood that the process conditions such as temperature, deformation and rate of deformation influence the bond strength, a clear functional relationship between these conditions and the bond strength has yet to be established. The objective of the current study is to investigate the joining of Aluminum-6061 alloy specimens by hot compression bonding. Hot compression tests of beam specimen pairs were conducted at different temperatures (300-500℃), with different strains and strain rates (10-2-10-1 [1sec]). Coupled thermo-mechanical finite element models were utilized to compute the time dependent thermo-mechanical fields that develop along the specimen interface. The computed values were used to map the spatial distribution of a scalar parameter J which is hypothesized to govern bond formation. Mechanical tensile tests were used to determine the bond strength and expose the bonded surfaces. It is demonstrated that the computed J distribution can be correlated well with SEM observations of the debonded surface. It is also shown that the actual bonded area can be predicted from the computations for a certain range of critical J values.

Background: Limited data exist on postoperative acute kidney injury (AKI) in patients underwent esophageal cancer surgery. The purpose of the study was to evaluate the incidence, risk factors and consequences of postoperative acute kidney after esophagectomy. Methods: This was a retrospective cohort study. The study was conducted in a tertiary specialized cancer center in Italy. All patients undergoing elective esophageal cancer surgery between 2016 and 2021 were included in the study. AKI was defined according to Kidney Disease: Improving Global Outcomes criteria (both serum creatinine and urine output), within 48 hours after surgery. Preoperative and intraoperative data were registered. We also collected data concerning progression of AKI, need for kidney replacement therapy, mortality, medical (pulmonary, cardiovascular, septic) and surgical complications within 30 days from surgery, as well as length of hospital stay. Results: Incidence of postoperative AKI was 32%. The independent risk factors were body mass index and the invasive surgical approach. Persistent AKI accounted for 15% of the cases and it was associated with increased risk of major cardiovascular events (odds ratio 4.14, 95% CI 1.05-15.8, p-value 0.036), pulmonary complications (OR 3.67, 95% CI 1.04-14.9, p-value 0.050) and increased length of hospital stay (AME 7.2, 0.5-13.9, p-value 0.035). Conclusions: Postoperative AKI is common after esophageal cancer surgery. BMI and totally invasive surgical approach are independent risk factors. Persistent AKI lasting more than 48 hours increased the risk for cardiovascular and pulmonary complications, with prolonged length of hospital stay.

To decrease oral pathogens and increase the number of beneficial bacteria, probiotics and bioactive compounds made via microbial bioconversion are recently used. In addition, the interest regarding probiotics-mediated bioconversion with popular medicinal plants is increasing. These compounds produced during the process exhibit synergistic effect and enhance a variety of biological activities including pathogen inhibition in host. Therefore, we developed bioconverted milk with high inhibitory activity against oral pathogens and α-glucosidase. Lactiplantibacillus plantarum SMFM2016-RK was chosen as the probiotic due to its beneficial characteristics such as high acid and bile tolerance, antioxidant activity, and α-glucosidase inhibition. Based on the minimal bactericidal concentration against three oral pathogens, the following appropriate concentrations of Artemisia herba-alba extract were added to milk: 5 mg/mL of A. herba-alba ethanol extract and 25 mg/mL of A. herba-alba hot-water extract. Four bioconverted milks (BM), BM1, BM2, BM3, and BM4, were produced by combining L. plantarum SMFM2016-RK alone, L. plantarum SMFM2016-RK and ethanol extract, L. plantarum SMFM2016-RK and hot-water extract, and L. plantarum SMFM2016-RK with both extracts. As a result of antimicrobial activity, BM3 inhibited the growth of Aggregatibacter actinomycetemcomitans and Porphyromonas gingivalis the most, and BM4 suppressed the growth of Fusobacterium nucleatum the most. In addition, bioconverted milk containing A. herba-alba (BM2, BM3, and BM4) inhibited α-glucosidase more effectively than BM1. In conclusion, A. herba-alba-added milk bioconverted by L. plantarum SMFM2016-RK displayed the growth inhibitory effect on oral pathogens and the α-glucosidase inhibitory activity, thus it necessitates to evaluate the effects on the alleviation of oral diseases and glycemic control through future animal experiments.

Cronbach’s (1957) famous division of scientific psychology into two disciplines is still actual for the fields of cognition (general mechanisms) and intelligence (dimensionality of individual differences). The welcome integration of the two fields requires the construction of mechanistic models of cognition and cognitive development that explain key phenomena in individual differences research. In this paper we argue that network modeling is a promising approach to integrate the processes of cognitive development and (developing) intelligence into one unified theory. Network models are defined mathematically, describe mechanisms on the level of the individual, and are able to explain positive correlations among intelligence subtest scores - the empirical basis for the well-known g-factor - as well as more complex factorial structures. Links between network modeling, factor modeling and item response theory allow for a common metric, encompassing both discrete and continuous characteristics, for cognitive development and intelligence.

This qualitative study explores the pivotal roles of trust and communication in supplier relationship management (SRM) within the e-commerce sector. Drawing on interviews and thematic analysis, the study examines how trust, comprising dimensions of competence, benevolence, integrity, and reliability, underpins collaborative partnerships and operational resilience between e-commerce platforms and suppliers. Effective communication strategies, including proactive engagement, transparent feedback mechanisms, and real-time updates via digital platforms, are identified as critical enablers for enhancing information exchange and fostering mutual understanding in SRM. Challenges such as cultural differences, technological complexities, and regulatory compliance requirements are also discussed, highlighting the need for strategic management and investment to mitigate risks and maintain trust in supplier engagements. Relational competencies such as empathy, active listening, conflict resolution, and trust-building skills are recognized as essential for navigating interpersonal dynamics and fostering collaborative relationships in e-commerce SRM. Strategically, integrating these findings into comprehensive SRM frameworks is emphasized to cultivate a positive organizational culture characterized by openness, ethical integrity, collaboration, and adaptability. This approach aims to enhance supplier relationships, drive innovation, and achieve sustainable growth in a competitive marketplace.

This qualitative study explores the intricacies of building sustainable supplier relationships in the e-commerce sector, focusing on best practices and strategic approaches. Through in-depth interviews with procurement managers, supply chain experts, and supplier representatives, the research identifies four critical themes: trust, technology integration, ethical practices, and performance measurement. Trust is found to be the foundation of effective supplier relationships, fostering open communication and collaboration, which are essential for addressing challenges and co-creating solutions. The integration of digital technologies such as supply chain management software, blockchain, and the Internet of Things significantly enhances transparency, decision-making, and operational efficiency, providing a competitive edge. Ethical practices, including adherence to fair labor standards and environmental sustainability, are increasingly crucial as consumer and regulatory expectations evolve, necessitating alignment between e-commerce companies and their suppliers. Performance measurement and continuous improvement are vital for maintaining quality and efficiency, with clear metrics and regular evaluations driving constructive feedback and optimization of supply chain processes. The study underscores the interdependence of these elements in fostering resilient and adaptable supplier relationships. The findings offer practical guidance for e-commerce businesses and suppliers, emphasizing the need for a holistic approach to supplier management that balances trust, technology, ethics, and performance. This approach not only enhances operational effectiveness but also ensures the long-term sustainability of supplier relationships in the dynamic e-commerce landscape. The research contributes to the theoretical understanding of supplier relationship management, providing a comprehensive framework for future studies and practical applications in the e-commerce industry.

This qualitative study explores the relationship between supply chain responsiveness (SCR) and customer loyalty within the e-commerce sector. E-commerce has revolutionized global commerce, driven by technological advancements and shifting consumer behaviors. Central to e-commerce success is the ability to meet customer expectations swiftly and reliably, necessitating agile supply chain management (SCM) practices. SCR in e-commerce encompasses the capacity to adapt to dynamic market demands, minimize disruptions, and enhance customer satisfaction through efficient logistics, inventory management, and last-mile delivery. Through in-depth interviews with customers, e-commerce platform managers, and supply chain practitioners, this study investigates key themes, challenges, strategies, and impacts associated with SCR and customer loyalty. Findings reveal that customers prioritize fast order fulfillment, reliable service quality, personalized experiences, and trustworthy interactions, all of which significantly influence their loyalty and advocacy behaviors. Challenges identified include inventory management complexities, logistical hurdles in last-mile delivery, and the need for effective supplier communication. Strategic approaches to enhance SCR include leveraging data analytics for demand forecasting, adopting agile SCM practices, integrating customer feedback into service improvements, and fostering collaborative relationships with suppliers. These strategies not only optimize operational efficiency but also cultivate enduring customer relationships based on satisfaction, trust, and loyalty. The study concludes that improved SCR practices lead to increased customer satisfaction, repeat purchases, and positive word-of-mouth, thereby strengthening competitive advantage and sustainability in the e-commerce marketplace.

This study explores the role of stakeholder engagement in enhancing supply chain sustainability within the renewable energy sector. Through a qualitative research approach, including in-depth interviews with key stakeholders such as government agencies, industry associations, renewable energy companies, community groups, and environmental organizations, the research reveals the complexity and significance of effective stakeholder engagement. Stakeholders highlighted diverse motivations, including environmental, social, economic, and regulatory concerns, driving their participation. The study underscores the importance of tailored engagement strategies that recognize stakeholder heterogeneity and address specific needs and expectations. Collaborative approaches, such as public-private partnerships and multi-stakeholder initiatives, were identified as crucial for pooling resources, sharing knowledge, and addressing common challenges. However, challenges related to power imbalances, conflicting interests, and communication barriers were also noted. Government policies and regulatory frameworks were found to play a pivotal role in shaping stakeholder engagement practices and sustainability outcomes. Regulatory uncertainty and inconsistency were cited as significant concerns that could undermine sustainability initiatives. Community engagement emerged as a critical factor, with local communities often directly impacted by renewable energy projects. Meaningful engagement, including consultation and benefit-sharing mechanisms, is essential for building trust and securing social acceptance. Emotional intelligence and marketing strategies were recognized as important tools for effective stakeholder engagement, emphasizing the role of empathy, active listening, and clear communication. The findings of this study highlight the need for a holistic and integrated approach to stakeholder engagement and supply chain sustainability in the renewable energy sector. By addressing diverse stakeholder needs, fostering collaboration, and aligning policies with sustainability goals, stakeholders can work together to accelerate the transition towards a more sustainable energy future.

The space exploration landscape has transformed dramatically over the past several decades, with a significant rise in the number of annual launches. Key factors driving this increase include technological advancements, the miniaturization of satellites, and the surge in commercial satellite deployments for communication, Earth observation, and remote sensing. This paper examines the evolution of space activities from the launch of Sputnik 1 in 1957 to recent developments in commercial spaceflight and international collaborations. The paper discusses notable milestones in space exploration history, including early space missions, Apollo Moon landings, and the development of space stations like the International Space Station. It highlights the shift from state-led space programs to a more diverse landscape, characterized by private sector involvement and international partnerships. The "Space 4.0" phase, beginning around 2006, has seen the entry of commercial players like SpaceX, leading to a significant upsurge in orbital launches. Statistical data reveals an upward trend in launch activity, with over 200 launches in 2023 alone, driven by large satellite constellations like SpaceX's Starlink and the steady growth of China's space program. The increasing launch rate poses challenges such as space debris, emphasizing the need for mitigation strategies. Looking ahead, the paper projects a continued increase in launch activity, with over 150 launches expected annually by 2026 and 200-300 launches by 2040. Commercial space ventures, deep space exploration, lunar activities, and space tourism drive this growth. The paper concludes by emphasizing the importance of addressing space debris and promoting the long-term sustainability of space activities, which is crucial as humanity's presence in space continues to expand.

Concrete cracks and local damage can affect the bond performance between concrete and steel bars, thereby reducing the durability of reinforced concrete structures. Compared with general concrete crack repair methods, biomineralization repair not only has effective bonding capabilities but is also particularly environmentally friendly. In view of this, this study aimed to apply biomineralization technology to repair damaged fiber-reinforced lightweight aggregate concrete (LWAC). Two groups of LWAC specimens were prepared. The control group used lightweight aggregates (LWAs) without bacterial spores and nutrient sources, and the experimental group used LWAs containing bacterial spores and nutrient sources. These specimens were first subjected to compression tests and pull-out tests, respectively, and thus were damaged. After the damaged specimen healed itself in different ways for 28 days, secondary compression and pull-out tests were conducted. The self-healing method of the control group involved placing the specimens in an incubator. The experimental group was further divided into experimental group I and experimental group II. The self-healing method of experimental group I was the same as that of the control group. The self-healing method of experimental group II involved soaking the specimen in a mixed solution of urea and calcium acetate for two days, and then taking it out and placing it in an incubator for two days, with a cycle of four days. The test results showed that, compared with the control group specimens, the relative bond strength ratio of the experimental group II specimens increased by 17.9%. Moreover, the EDS and XRD analysis results confirmed that the precipitate formed at the crack was calcium carbonate, which improved the compressive strength and bond strength after self-healing. This indicates that the biomineralization maintenance method used in experimental group II is more effective.

Fatigue is a recognized concern in air traffic management, prompting international bodies like ICAO and EASA to advocate for Fatigue Risk Management Systems (FRMS). EU Regulation 2017/373, effective since January 2020, imposes specific requirements on air traffic service providers regarding controllers' fatigue, stress, and rostering systems, as part of safety management protocols. Despite active campaigns promoting fatigue awareness in air traffic control (ATC), there remains a need for standardized operational requirements. Eurocontrol recently published "Guidelines on fatigue management in ATC rostering systems" (April 23), aiming to facilitate the adoption of common fatigue operational standards. However, neither EU Regulation 2017/373 nor existing documentation specifies exact rostering criteria. Air Navigation Service Providers (ANSPs) typically derive these criteria from scientific literature, best practices, historical data, and legal and operational necessities. Yet, assessing and monitoring fatigue in operational settings can be complex and require long-term studies due to its multifaceted nature, spanning factors such as sleep quality, circadian rhythms, psychosocial influences, individual traits, and environmental conditions. The case studies reported in this paper represent an attempt to create an evidence-based protocol for fatigue risk monitoring in ATC operations, utilizing a non-invasive approach and collecting multidimensional data. The two case studies involved en-route and tower controllers from different ATC Centers, and the results underscore the importance of fatigue assessment in ATC and elucidates challenges in implementing fatigue monitoring within operational contexts.

In India, particularly within its North-Eastern territories, the occurrence of landslides triggered by post-dry period rainfall events is a significant concern, with the phenomena persistently causing extensive damage to both life and infrastructure. Despite the inevitability of such natural disasters, it is understood that the impact they exert can be substantially mitigated through the implementation of pre-emptive measures. Critical to the endeavour of landslide prevention is the application of a spectrum of mitigation strategies, predicated upon a foundational analysis of slope stability to ascertain critical surfaces for intervention. This investigation delves into the dynamics of partially saturated soils, a condition commonly resultant from the prolonged dry periods preceding the monsoonal rains. The study's focal point is an experimental examination conducted on soil samples to assess parameters such as soil matric suction and unconfined compressive strength across varying degrees of saturation and density, alongside performing analyses of slope failure incidents after dry period during the 2017 monsoon in the Lunglei district, Mizoram based on some established data. The Soil-Water Characteristic Curve (SWCC), derived from soil suction measurements employing the ASTM D5298-10 standard, utilizes a contact filter paper method and serves to delineate the moisture transition phases of the slope. To replicate the desiccation of the soil slope after monsoonal rains, a microwave drying technique based on the ASTM standard was employed to prepare unsaturated soil samples for Unconfined Compressive Strength (UCS) testing. The integrity of the slope was evaluated in a temporal context, before and after rainfall events of varied intensities throughout the calendar year, utilizing a blend of numerical modeling and empirical laboratory investigations. The persistence of real onsite slope failures underscores the necessity for a numerical analysis approach to unravel the underlying factors causing slope instability, especially given the absence of prior stability assessments for the landslide in question. An evaluation of SWCC curves, UCS tests on partially saturated soil at different densities and saturation and the utilization of the benchmark data collected in 2017 on the shallow transitional landslide in Lunglei, Mizoram caused by intense monsoonal precipitation, are central key data and information used to carry out this research. Rainfall data for Lunglei, sourced from the Mizoram Meteorological Department, facilitated a real-time monsoonal data-driven numerical analysis. This analysis elucidated the pivotal role of rainfall in inducing slope failure, indicating a marked destabilization of the slope after precipitation events. The implications of these findings are far-reaching, suggesting a foundational basis for the development of an advanced landslide early warning system, thereby enhancing disaster preparedness, and mitigating potential damages.

Many young people are reluctant to seek support for mental health concerns and a preference for self-reliance has been identified as a key barrier. Yet, the conceptualisation and measurement of self-reliance is not well understood. This study examines the meaning of self-reliance as it affects young people’s help-seeking, with an emphasis on the role of trust (both in self and in others). 30 Australian young people aged 18-25 years were interviewed. Reflexive thematic analysis, using both inductive and deductive approaches, was used to construct themes about the relationships between trust, self-reliance, and help-seeking for young people. Participants identified that both self-reliance and help-seeking exist on a continuum from insufficient self-reliance to extreme self-reliance and excessive help-seeking to unwillingness to seek help. Trust was a key component of self-reliance, and a balance between trust in self and trust in others is necessary for self-reliance to be adaptive and appropriate help-seeking to occur. To maintain this balance, young people felt that a level of self-awareness was necessary. A high level of trust in self is considered to increase self-reliance, whereas a high level of trust in others increases help-seeking behaviours. Understanding the role of trust in self-reliance informs developmentally appropriate ways to address self-reliance as a barrier to mental health help-seeking for young people.

Nicotinamide is an important functional compound and, in the form of nicotinamide adenine dinucleotide (NAD), is used as a cofactor by protein-based enzymes to catalyze redox reactions. In the context of the RNA world hypothesis, it is therefore reasonable to assume that ancestral ribozymes could have used cofactors such as NAD or its simpler analog nicotinamide riboside (NAR) to catalyze redox reactions. The only described example of such an engineered ribozyme uses a nicotinamide moiety bound to the ribozyme through non-covalent interactions. Covalent attachment of NAR to RNA could be advantageous, but the demonstration of such scenarios to date has suffered from the chemical instability of both NAR and its reduced form NARH, making their use in oligonucleotide synthesis less straightforward. Here, we review the literature describing the chemical properties of the oxidized and reduced species of NAR, their synthesis, and previous attempts to incorporate either species into RNA. We discuss how to overcome the stability problem and succeed in generating RNA structures incorporating NAR.

Hazelnut (Corylus avellana L.) is of great agroeconomic importance, prized for its nutritional value and antioxidant properties. Its yield and quality may differ due to factors such as season (S), locality (L) and cultivar (C). Our objective was to determine the dynamics of morphological features and antioxidant properties in nuts of Barcelona and Tonda di Giffoni (TDG) cultivars planted at two localities (Cunco and Perquenco) during three productive seasons (S1, S2 and S3). Barcelona grown in Perquenco in S1 and S3 (less precipitation, more solar radiation), performed better than in Cunco with respect to most morphological nut, kernel and shell features, and the same parameters generally had the same trends for TDG in S2 and S3. Among the seasons at the same localities, the differences between the predominant condition defects for both cultivars were in the decreasing order wrinkled/deformed kernels, double kernels, blank and mold ker-nels, with about 75% of hazelnuts without defect. In both cultivars, the shell had higher antioxi-dant properties that increased in S1 and S3 at both localities, and were consistently higher than in the kernels. Lipid peroxidation was higher in the kernel than shell in both cultivars and local-ities for S1 and S3. The results of this study suggest that the different hazelnut cultivar features including physical and chemical components depend on season and locality, which offers im-portant clues for all those interested in the hazelnut industry.

Acoustic focusing of particle flow in microfluidics has been shown to be an efficient tool for particle separation for various chemical and biomedical applications. The mechanism behind the method is the selective effect of the acoustic radiation force on distinct particles. In this way, they can be selectively focused and separated. The technique can also be applied under stationary conditions, i.e., in the absence of fluid flows. In this study, the manipulation of self-propelled particles, such as Janus particles, in an acoustofluidic setup is investigated. In experiments with self-propelled Janus particles and passive beads, we explore the interplay between self-propulsion and the acoustic radiation force. Our results demonstrate unusual and potentially useful effects such as selective trapping, escape and assisted escape in binary mixtures of active and passive particles. We also analyze various aspects related to the behavior of Janus particles in acoustic traps in the presence and absence of flows.

Bio-absorbable stents are a novel tool which relieve stenosis and then resorb as the patient grows, avoiding obligatory re-intervention. This case describes the novel use of an iron bio-absorbable stent in a child with surgically repaired Tetralogy of Fallot who post-operatively developed a severely stenotic right ventricular outflow tract.

Furazolidone (FZD) is a synthetic nitrofuran with the antiprotozoal and antibacterial activity. The proper mechanism of FZD induced toxicity is still unclear. This study aimed to investigate the protective effect of curcumin on FZD induced oxidative stress, DNA injury and apoptosis in human hepatocyte L02 cells. The results showed that curcumin treatment significantly ameliorated FZD induced cytotoxicity, characterized by decreasing the production of reactive oxygen species (ROS) and malondialdehyde, as well as increasing superoxide dismutase, catalase activities and glutathione contents. Moreover, curcumin pretreatment significantly inhibited FZD induced the loss of mitochondrial membrane potential, the activation caspase-9 and -3 and apoptosis. Comet assay showed that curcumin attenuated FZD induced DNA injury in a dose-dependent manner. Correspondingly, curcumin markedly reversed the up-regulation of p53, Bax, caspase-9 and -3 mRNA expressions and the down-regulation of Bcl-2 mRNA (all p<0.05 or 0.01). These results reveal that curcumin protects against FZD induced oxidative stress, DNA injury and cell apoptosis via inhibiting oxidative stress and mitochondrial pathway, which may be attributed to ROS scavenging and anti-oxidative ability of curcumin. Importantly, our study highlights that curcumin may be a potential way to prevent FZD-mediated oxidative DNA injury and apoptosis in human or animals.

(1) Background: BRCA mutation and homologous recombination deficiency (HRD) are used to administrate PARP inhibitors (PARPi) maintenance therapy. It is known that PARPi efficacy is related to platinum sensitivity and that the latter can be demonstrated from the CA-125 elimination rate constant (KELIM). This study aims to investigate if KELIM can be another tool in the identification of patients that could be benefit from PARPi therapy.; (2) Methods: Retrospective analysis of patients with high-grade serous advanced ovarian cancer that underwent cytoreduction and was further tested for HRD status. The HRD status was tested either by myChoice HRD CDx assay or by RediScore assay. KELIM score was measured in both neoadjuvant and adjuvant settings with the online tool biomarker-kinetics.org.; (3) Results: Thirty-nine patients had available data for estimating both HRD status and KELIM score. When assuming KELIM as a binary index test with the value 1 as the cut-off point, the sensitivity was 0.86, 95% CI (0.64-0.97), and the specificity 0.83, 95% CI (0.59-0.96). On the other hand, when assuming KELIM as a continuous index test, the AUC was 81% and the optimal threshold, using the Youden index, was identified as 1.03 with a sensitivity of 85.7% and a specificity of 83.3%; (4) Conclusions: KELIM score seems to be a new, cheaper and faster tool to identify patients that can benefit from PARPi maintenance therapy.

Melanoma is the most aggressive form of skin cancer. In the advanced stage of development it is resistant to currently available therapeutic modalities. Increased invasiveness and metastatic potential depend on a number of proteins involved in various signal transduction pathways. Hippo signaling plays an important role in malignant transformation. Dysfunctions of the Hippo pathway initiate the expression of tumor growth factors and is associated with tumor growth and metastasis formation. This review summarizes the recent achievements in studying the role of the Hippo pathway in melanoma pathogenesis and points to the potential specific targets for anti-melanoma therapy.

The vaccines have to undergo independent testing at National Control laboratory (NCL) for various quality control tests to ensure safety, purity, and potency before market authorization and surveillance testing. In this study, five different inactivated cell culture rabies vaccine preparations (Aluminum adjuvanted and non-adjuvanted) marketed in India were evaluated using compendial safety test of mouse inoculation test (MIT) for residual live virus. Investigations were done to see the interference of aluminum adjuvant in rabies vaccine preparation to ensure safety as per the in-vivo compendial test for virus inactivation. After intracerebral injections, mice received the aluminum phosphate adjuvanted inactivated rabies vaccine (ARV) had neurological complications that resulted in their deaths between days 4 and 10. Further investigations were carried out to find out the root cause for mice death including fluorescent antibody test (FAT), rabies virus amplification test. Additionally, alamar blue based cell cytoxicity assay was carried out using BHK-21 cells to estimate the cell toxicity of aluminum phosphate adjuvanted inactivated rabies vaccine. The present study highlighted the challenges in ensuring the safety of adjuvated inactivated rabies vaccine at level of NCL. Further, study demonstrated the toxicity of aluminum under both in vitro and in vivo settings, sparking controversy regarding the safety of aluminum adjuvants in vaccines at the suggested compendial limit of 1.25 mg/single human dosage.

Despite the progress achieved regarding survival rates in childhood B-acute lymphoblastic leukemia, relapsed and/or refractory disease still poses a therapeutic challenge. Inotuzumab ozogamicin is a CD22-directed monoclonal antibody conjugated to calicheamicin, which has been approved for adults with CD22+ refractory/relapsed B lineage acute lymphoblastic leukemia and has already demonstrated promising results in the pediatric setting. The Food and Drug Administration approved inotuzumab ozogamicin (Besponsa, Pfizer) for pediatric patients 1 year and older with relapsed or refractory CD22-positive B-cell precursor acute lymphoblastic leukemia. Herein, we present the case of a 23-month-old girl with high-risk B-acute lymphoblastic leukemia, who experienced very early isolated medullary relapse and invasive pulmonary aspergillosis. She was finally successfully transplanted upon achieving remission and minimal residual disease negativity with two cycles of inotuzumab ozogamicin after failure of three lines salvage treatment with conventional chemotherapy, blinatumomab and bortezomid.

With the development of Global Navigation Satellite Systems (GNSS), the quality and anti-jamming capability of satellite navigation signals are crucial. Binary Offset Carrier (BOC) modulation faces issues of false locking due to multi-peak ambiguity in its autocorrelation function, limiting its application. This paper examines FH-BOC modulation, which integrates BOC with frequency hopping technology, significantly improving anti-jamming, anti-multipath performance, and spectral efficiency. To meet the high dynamic tracking demands of FH-BOC signals, this study explores three types of carrier tracking loops: the traditional second-order frequency-locked loop assisted a third-order phase-locked loop, a linear Kalman filter-based tracking algorithm, and an adaptive Kalman filter-based tracking algorithm. A composite code tracking loop is also proposed. Simulations show that the adaptive Kalman filter algorithm achieves high-precision carrier tracking in dynamic environments and quickly converges during transitions. The composite code tracking loop, aided by the carrier loop, ensures precise synchronization of pseudocode and frequency-hopping subcarrier phases, demonstrating the superior performance of FH-BOC modulation in dynamic environments.

A novel investigation into the structure-function relationship was undertaken to enhance understanding of the mechanism of action of the vasoactive peptide angiotensin II (AngII) using unconventional substitutions such as AIB (α-aminobutyric acid), CHA (cyclohexylalanine acid), IAP (isonipecotic acid), TOAC (2,2,6,6-tetramethylpiperidine-1-oxyl-4-amine-4-carboxylic acid) at position 3, and DMT (2,6-dimethyl-Tyrosine) at position 4. Biological potency assays were conducted on guinea pig ileum, and structural features were analyzed using circular dichroism (CD) and molecular dynamics (MD). CHA3-AngII and AIB3-AngII analogs retained some agonistic activity, whereas IAP3-AngII and TOAC3-AngII derivatives were inactive. CD results indicated low conformational flexibility for AIB3-AngII and CHA3-AngII, and greater conformational restrictions for IAP3-AngII and TOAC3-AngII, consistent with computational modeling analyses. DMT4-AngII exhibited significant agonistic activity compared to the inactive Phe4AngII. Molecular modeling suggested a potential interaction between the hydroxyl group of Tyr4 and the amide bond between positions 7 and 8. AngII showed greater conformational restriction compared to DMT4-AngII and Phe4-AngII, underscoring the importance of tyrosine at position 4.

TTF1-NP(5,2′,4′-trihydroxy-6,7,5′-trimethoxyflavone nanoparticles), derived from the traditional Changbai Mountain medicinal plant Sorbaria sorbifolia (SS), has been showedits anti-cancer effect in various liver cancer cell types and tissues. The present study was designed to evaluate the antitumor mechanism of the TTF1-NP against HepG2 hepatoma cells and HepG2 cells-induced hepatocarcinoma (HCC) in nude mouse model. Here we demonstrated that TTF1-NP inhibits tube formation of HUVECs and HepG2 cell migration and invasion, and inhibits tumor growth in nude mice implanted with HepG2 cells through the downregulation of STAT3 protein and activation, along with VEGF, KDR, bFGF, MMP2 and MMP9 levels. We further revealed that TTF1-NP decreased the DNA-binding capacity of STAT3. Together our results provide a mechanism by which TTF1-NP suppresses cancer cell migration, invasion and angiogenesis through the action of STAT3 and suggests TTF1-NP as a potential therapy for hepatocellular cancer treatment.

This article aims to analyze the problem of the identity and persistence of objects based on the hylomorphic doctrine, that is, the doctrine according to which objects are mereological compositions of the elements of form and matter. After introducing the contemporary discussion on the problem of identity and persistence and identity of objects, we propose a brief formalism of the logic of the relationship between part and whole or mereology to define the solution to the problem under study that defines a possible solution for it.

Wellbeing is a multifaceted concept that involves various facets of human condition and experience, including individual and communal spiritual, emotional, intellectual, physical, and social dimensions. To explore the complex facets of sustainable wellbeing, this study utilized an interpretive qualitative research approach, looking at round table (focus group) discussion data obtained from a diverse group of public and private sector representatives, including education, government, non-governmental organizations, and businesses in Qatar. The purpose of this study was to gain a contextualized understanding of how participants perceive and experience wellbeing. A purposive sampling technique was employed to recruit participants representing different sectors of society. To elicit participants’ perspectives on wellbeing, thematic analysis was used to identify recurring themes and patterns that emerged from the focus groups, viewed through the lens of Bronfenbrenner’ Ecological Systems Theory. Findings reveal that wellbeing is a very personal and subjective experience. Key themes extracted from the data include challenges to sustainable wellbeing in Qatar, including technological disruptions and socio-cultural influences. These challenges require proactive measures that reflect educational priorities, promote cultural preservation, and foster resilient communities while emphasizing individual and collective sustainable wellbeing. This research also identified opportunities for enhancing sustainable wellbeing in Qatar.

This paper addresses the approach of fully automated intelligent control systems in production organizations, focusing on intelligent production systems research. The overview highlights a gap in control operations ahead of assembly as single-purpose control machines are frequently employed, which is precisely their drawback. Conversely, there are accurate multipurpose measurement centers that do not provide total quality control over the manufactured parts because of the cost and length of the measuring procedure. The study's primary objective was to create an intelligent modular control system, whose concept enables it to control various components. The purpose of the modular intelligent control system is to keep an eye on each module's quality during the pre-assembly phase. This system ensures exact control over the production process of modules by integrating sophisticated sensors, diagnostic tools, and intelligent control mechanisms. The technology makes it possible to monitor several parameters and important quality features. Integrated sensors and diagnostic technologies identify possible inaccuracies and disparities, guaranteeing prompt diagnosis of issues in specific modules. The system's intelligent control algorithms streamline the production process and guarantee synchronization between individual modules to achieve consistent quality and performance. One advantage of implementing the solution is that, on average, inspection time is reduced by 40 to 60% as compared to the prior manual inspection approach. In addition, full measurement data archiving was made available, and finally, the human element—which introduced a substantial error rate into this process—was removed. This system also helps to increase the project's overall efficiency, predictability, and safety while allowing for quick adjustments by standards and requirements.

The next future using machine tools will be dominated by highly flexible and interconnected systems, in order to achieve the required productivity, accuracy and reliability. Nowadays, distortion and vibration problems are easily solved for the most common cases by sing models based on equations describing the physical laws dominating the machining process; however additional efforts are needed to overcome the gap between scientific research and the real manufacturing problems. In fact, there is an increasing interest in developing simulation packages based on “deep knowledge and models” that aid the machine designer, the production engineer, or machinists to get the best of their machines. This article proposes a systematic methodology to reduce problems in machining by means of a simulation utility, which recognizes, collects and uses the main variables of the system/process as input data, and generates objective results that help in the proper decision-making. Direct benefits by such an application are found in a) the fixture/clamping optimal design, b) the machine tool configuration, c) the definition of chatter free optimum cutting conditions and the right programming of cutting tool path at the Computer Aided Manufacturing (CAM) stage. The information and knowledge-based approach showed successful results in several local manufacturing companies.

The primary objective of this paper is to establish connections between two well-known but previously independently developed theories: the theory of violator spaces and the theory of greedoids. Violator spaces were introduced by Matoušek et al. in 2008 as a generalization of linear programming problems. Greedoids were introduced by Korte and Lovász in 1981 in an effort to characterize combinatorial structures where greedy algorithms yield optimal solutions. In this work, we explore the relationships between violator spaces and greedoids, demonstrating that greedoids can be defined using a variant of a violator operator. These interrelations provide a new characterization of antimatroids.

Background: In this secondary analysis of the Supporting the Modification of Lifestyle In Lowered Emotional States (SMILES) randomised controlled trial, we investigated if the beneficial effects of a dietary intervention on clinical depression were driven, in part, by reducing the consumption of foods classified as ultra-processed.Methods: The SMILES trial enrolled 67 adults with major depressive disorder, randomly assigning them to either a 12-week modified Mediterranean dietary intervention or a social support control. Our analysis included 44 participants with non-missing dietary data and at least one valid Montgomery–Åsberg Depression Rating Scale (MADRS) assessment at 12 weeks of follow-up. The Nova food classification system was used to estimate the proportion of ultra-processed foods in the overall diet (percentage of grams) based on data from seven-day food diaries. We fitted linear regression models under blinded conditions to determine whether ultra-processed food intake-change from baseline to 12 weeks moderated the dietary intervention effects on depressive symptoms. We estimated mean differences in depressive symptoms along with ninety-five per cent confidence intervals (95%CIs).Results: For participants in the dietary intervention, there was an additional 2.5-point improvement in MADRS scores for each 10% reduction in the dietary share of ultra-processed foods compared to participants in the control group (between-group mean differences in depressive symptoms: −2.46, 95%CIs −4.71 to −0.20, p=0.039, η _p ² of 0.10).Conclusions: These preliminary findings suggest that the therapeutic benefit of a dietary intervention for depression may stem, at least in part, from reductions in the dietary share of ultra-processed foods.

Nano- and micro-sized CeO2 surface layers based on titanium alloy TiAl6V4 were obtained by magnetron sputtering with or without subsequent annealing. The structure of the samples was determined using scanning electron microscopy, Auger electron spectroscopy, energy dispersive spectroscopy, and X-ray diffraction. Hardness was measured by sclerometry. A direct linear dependence of the thickness of the surface layers on the deposition time and an extreme dependence, passing through a maximum, on the power are shown. A decrease in hardness with an increase in the thickness of the cerium oxide coating was noted. An increase in surface roughness, delamination and loosening of the surface layer, presumably associated with annealing, were noted. In samples with a surface layer thinner than 715 nm without annealing and 750 nm after annealing, the formation of a sublayer of TiO2, Al2O3, and Ce(VO4) was found, and in annealed samples with a layer length of less than 300 nm, all cerium dioxide reacted with vanadium dioxide to form vanadate.

The presence of copper in distilled sugar cane spirits, especially cachaça produced in alembics, has impeded the marketing of this product. Red mud (RM) is a residue obtained from alumina production. It contains a high concentration of metal oxides and is very alkaline. The RM was dried at 100 oC and sifted through a 150-micron sieve. The sample was characterized by B.E.T. nitrogen adsorption, scanning electron microscopy-energy-dispersive X-ray (SEM-EDX) and Atomic Absorption Spectrometry (A.A.S.). The textural parameters indicate that the total surface area (S.T.) was 21.9 m2g-1, and the total volume pore (V.T.) was 0.09 cm3g-1. The RM (1 g) was stirred for two hours with a 1.0 L cachaça sample containing 9.39 mg of copper L-1 and filtered under atmospheric pressure. The concentration of copper ions detected in the filtrate was 0.00 mg L-1. No copper ions were retained when the cachaça was filtered through the RM under high pressure without stirring prior to filtration.

In bone tissue engineering, ceramics have been the choice due to their excellent biological properties. But the paradigm changed with the discovery of bioactive glasses (BGs) in 1969 by Larry Hench and co-workers, due to their ability to bond to living tissues through the formation of an interfacial bone-like hydroxyapatite layer when the bioglass was put in contact with biological fluids in vivo. Among a number of tested compositions, the one exhibiting the highest bioactivity index is the well-known trademarked 45S5 Bioglass®. The topic received increasing attention particularly after 1985 when this material entered in the market of biomedical devices, inspiring many other investigations aiming at further exploring the in vitro and in vivo performances of this BG, or developing other related BG compositions. The research efforts gradually revealed a number of shortcomings of 45S5 Bioglass®, mostly derived from its high sodium content, initially intended to decrease the melting temperature and accelerating the degradation of the silicate network over time. But the extensive release of sodium from 45S5 Bioglass® in the biological fluids creates a high pH cytotoxic environment. Other serious drawbacks include a fast degradation rate, and a poor sintering ability, which hinders the reliable fabrication of porous scaffolds. Therefore, sol-gel was regarded as an attractive alternative to prepare alkali-free BG compositions. The process uses inorganic and/or organic precursors, which undergo hydrolysis and condensation at room-temperature, being less costly. When properly conducted, the sol-gel process might result in amorphous structures with all the components intimately mixed at the atomic scale. Moreover, developing new better performing materials for bone tissue engineering is a growing concern, as the ageing of the world’s population leads to lower bone density and osteoporosis. This work describes the sol-gel synthesis of a novel quaternary silicate-based BG with the composition 60 SiO2 – 34 CaO – 4 MgO – 2 P2O5 (mol%) was prepared using acidified distilled water as single solvent. By controlling the kinetics of the hydrolysis and condensation steps, an amorphous glass structure could be obtained. The results of XRD of samples calcined within the temperature range from 600-900 ºC demonstrated that amorphous nature was maintained until 800 ºC, followed by partial crystallization at 900 ºC. The specific surface area, an important factor in osteoconduction, was also evaluated over different temperatures, ranging from 160.6 ± 0.8 m2/g at 600 ºC down to 2.2 ± 0.1 m2/g at 900 ºC, being accompanied consistent changes in average pore size and agreeing pore size distribution. The immersion of the BG particles in simulated body fluid (SBF) led to the formation of an extensive apatite layer on its surface. These overall results indicate the proposed material is very promising for biomedical applications in bone regeneration and tissue engineering.

Directed energy deposition (DED) parameters were determined for near-β alloy Ti-55511 by employing statistical design of experiments (DOE) methods. Parameters resulting in fully dense freeform deposits were identified using two sequential DOEs. Single laser tracks were printed with several laser power, traverse rate, and powder feed rate settings in an initial DOE to identify promising build parameters. Capture efficiency and effective deposition rate were used to characterize and rank the single track deposits. The best parameters were then used to print solid cube with various X-Y and Z-overlaps (different hatch spacing, HS, and layer thickness, ZS) in a second DOE. Suitable deposition parameters were selected based on cube density and microstructure and were used to fabricate larger tensile samples for mechanical testing. Multiple parameter sets were found to provide dense Ti-55511 deposits with acceptable mechanical properties and parametric models showed statistical significance.

Natural products have a significant role in the development of new drugs, being relevant the pentacyclic triterpenes extracted from Olea europaea. Anticancer effect of uvaol, a natural triterpene, has been scarcely studied. The aim of this study was to understand the anticancer mechanism of uvaol in HepG2 cell line. Cytotoxicity results showed a selectivity effect of uvaol with higher influence in HepG2 than WRL68 cells used as control. Uvaol presented anti-migratory capacity in HepG2, supported by the morphological changes and higher HSP-60 expression. This compound also induced arrest in G0/G1 phase and an increase in apoptosis rate. These results are supported by decreased Bcl-2 expression and down-regulation of AKT/PI3K signaling pathway. A reduction in reactive oxygen species levels in HepG2 cells was observed. Altogether, results showed anti-proliferative and pro-apoptotic effect of uvaol on hepatocellular carcinoma, constituting an interesting challenge in the development of new treatments against this type of cancer.

This study employs a comprehensive computational approach to identify and evaluate potential inhibitors of gamma D crystallin (CRYGD), a key protein implicated in cataract formation. A library of compounds, including natural products and FDA-approved drugs, was screened using molecular docking simulations and binding energy calculations. The top-scoring compounds were further assessed for drug-likeness properties and potential toxicity. Molecular dynamics simulations were conducted on the most promising candidates to investigate their interactions with CRYGD at the atomic level. The study identified CNP0185903, CID 3741, and CNP0151361 as the most promising compounds, with CNP0151361 demonstrating the most favorable combination of binding affinity, structural stabilization, and conformational modulation of CRYGD. These findings provide a foundation for the development of novel pharmacological interventions for cataract treatment, potentially offering alternatives or complements to current surgical approaches.

This study investigates the landscape of public funding for Adult Education for Sustainable Development (AESD) in Slovenia, focusing on the distribution, types of funding, and their impact on accessibility and quality. Using a mixed methods approach to understand the distribution, types of funding, and their impacts on accessibility and quality. Data were collected through an online questionnaire completed by 59 organizations providing non-formal AESD, alongside semi-structured interviews conducted with 12 representatives. Key findings reveal a significant disparity between operational funding and that designated for AESD implementation, with non-governmental organizations (NGOs) emerging as the primary recipients of public funds. Notably, project-based funding predominates, raising concerns about the sustainability of AESD programs due to its typically time-limited nature. Public funding is essential for ensuring program accessibility and quality, as it enables organizations to hire experts and enhance curricula. However, the reliance on project-based grants creates instability, complicating long-term planning and program effectiveness. The study underscores the need for systematic and continuous funding strategies to support AESD, highlighting the importance of a cross-sectoral approach to policymaking. Overall, the research elucidates the intricate relationship between funding distribution, program effectiveness, and the advancement of sustainable development education.

In the plot under study, rice is grown under anaerobic conditions by means of flood irrigation that maintains a constant water depth during most of the crop cycle. Thus, water requirements reach a very high volume of about 12,000 m3/ha. At the outlet there is a drainage channel where there are no measuring devices. Its control will allow us to establish practices to reduce the high water consumption. We have designed a long-throated flume that can cover the entire range of flow rates to measure, between 0.02 and 0.05 m3/s in this case. Since the drainage channel has a trapezoidal cross section and is built on land, the throat of the flume will also be trapezoidal to ease the transition between the two sections and reduce head losses. A new procedure has been developed that allows to directly design the dimensions of the narrowed section, side slope and bottom width, by previ-ously choosing the modular limit, the sill height and the length of the throat more in accordance with the characteristics of the channel where the flume is to be installed. The analysis of the obtained results demonstrates the accuracy and feasibility of the presented procedure.

Cerebral aneurysms come in a wide range of shapes and sizes, they can evolve over time and present significant changes. It is generally accepted that large aneurysms are more prone to rupture, but the rupture of small aneurysms has also been observed, indicating the presence of additional risks factors. The aim of this study is to assess the effects of the aneurysm size and wall thickness on its rupture risk by using fluid-structure interaction simulations. Six patient-specific geometries were chosen, four were used for studying the size effect and two for studying the thickness effect. Additional cases where the aneurysm was removed were included. It was found that thinner walls suffer from significantly greater stresses, whereas an increment in size means, in general, lower wall shear stress and greater equivalent stress. By removing the aneurysm, it could be noted that at the rupture point, the reduction in the time-averaged wall shear stress was 75%. Although the size of an aneurysm has a great impact in its rupture risk, its wall thickness needs to be considered, since even maintaining its size, the aneurysm could suffer from a thin-ning of its walls that can lead to structural failure.

The Duffy protein, a transmembrane molecule, functions as a receptor for various chemokines and facilitates attachment between the reticulocyte and the Plasmodium Duffy antigen-binding protein. Duffy expression correlates with the Duffy receptor gene for the chemokine, located on chromosome 1, and exhibits geographical variability worldwide. Traditionally, researchers have described the Duffy negative genotype as a protective factor against phenotypic malaria expression. However, recent studies suggest this microorganism's evolution potentially diminishes this protective effect. Nevertheless, there is currently insufficient global data to demonstrate this phenomenon. This study aimed to evaluate the relationship between the Duffy genotype/phenotype and the prevalence of Plasmodium vivax infection. The protocol for the systematic review was registered in PROSPERO as CRD42022353427 and involved reviewing published studies from 2012 to 2022. Medline, Web of Science, Scopus, and Scielo databases were consulted. Assessments of study quality were conducted using the STROBE and GRADE tools. A total of 34 studies were included, with Africa accounting for most recorded studies. The results varied significantly regarding the relationship between the Duffy genotype/phenotype and Plasmodium vivax invasion. Some studies predominantly featured the negative Duffy genotype yet reported no malaria cases. Other studies identified minor percentages of infections. Conversely, certain studies observed a higher prevalence (99%) of Duffy-negative individuals infected with Plasmodium vivax. In conclusion, no evidence of a gender-specific distribution of malaria between Duffy-negative men and women was found. However, evidence supports that the homozygous Duffy genotype positive for the A allele (FY*A/*A) is associated with a higher incidence of Plasmodium infection. Furthermore, the negative Duffy genotype does not confer protection against this disease.

Ulcerative colitis has a significant impact on the quality of life for the patients, and can substantially increase the risk of colon cancer in patients suffering long-term. Conventional treatments provide only modest relief paired with a high risk of side effects, while complementary and alternative medicines can offer safe and effective options. Over the past decade, we have shown that American ginseng has anti-oxidant and anti-inflammatory properties that can suppress mouse colitis and prevent colitis associated colon cancer. With the goal of isolating a single active compound, we further fractionated the hexane fraction, and found the most abundant molecule in this fraction was the polyacetylene, Panaxynol. After isolating and characterizing Panaxynol, we tested the efficacy of Panaxynol in the treatment and prevention of colitis in mice and studied the mechanism of action. We demonstrate here that Panaxynol effectively treats colitis in a Dextran Sulfate Sodium mouse model by targeting macrophages for DNA damage and apoptosis. Positive outcomes from this study could take American ginseng one-step further towards becoming a conventional drug for the treatment of colitis, and possibility exploring other autoimmune diseases associated with macrophage dysfunction.

Caudal type homeobox transcription factor 2 (CDX2) is a gastrointestinal cancer biomarker that regulates epithelial development and differentiation. Absence or low levels of CDX2 have been associated with poor prognosis and proposed as a chemotherapy response predictor. Tumour tissue of 668 patients with stage I-IV colorectal cancer were stained for CDX2 and stratified into two subgroups according to expression levels. Statistical tests evaluated CDX2 relationship with survival and chemotherapy response. Of 646 samples successfully stained, 51 (7.9%) had low and 595 (92.1%) had high CDX2 levels. Low CDX2 staining was associated with poor differentiation, presence of lymphovascular or perineural invasion, and more common in colon and right sided tumours. Overall survival (p&lt;0.001) and disease-free survival (p=0.009) was lower in low CDX2 expressing patients. Multivariable analysis validated CDX2 as an independent poor prognostic factor after excluding confounding variables. There was no statistically significant improvement in survival with adjuvant chemotherapy in stage II colon cancer (p=0.11). In the rectal cohort, there was no relationship between CDX2 levels and therapy response. While confirming the prognostic utility of CDX2 in colorectal cancer, our study highlights larger studies are required to confirm utility as a predictive chemotherapy biomarker, especially in left sided and rectal cancers.

Stable suspensions of metal/metalloid oxide nanoparticles (Me-NPs) obtained by laser ablation of 99.99% pure elemental aluminum, titanium or silicon under a layer of deionized water were used separately, or in three binary combinations, or in a ternary combination to induce subchronic intoxications in rats. To this end, the Me-NPs were repeatedly injected intraperitoneally (i.p.) 18 times during 6 weeks before measuring a large number of functional, biochemical, morphological and cytological indices for the organism’s status. In many respects, the Al₂O₃-NP was found to be the most toxic species alone and the most dangerous component of the combinations studied. Mathematical modeling with the help of the Response Surface Methodology showed that, as well as in the case of any other binary toxic combinations previously investigated by us, the organism’s response to a simultaneous exposure to any two of the Me-NP species under study was characterized by a complex interaction between all possible types of combined toxicity (additivity, subadditivity or superadditivity of unidirectional action and different variants of opposite effects) depending on which outcome a given type was estimated for and on effect and dose levels. With any third MeO-NP species acting in the background, the type of combined toxicity displayed by the other two remained virtually the same or changed significantly, becoming either more or less unfavorable. Various harmful effects produced by the [Al₂O₃-NP+TiO₂-NP+SiO₂-NP]-combination, including its genotoxicity, were substantially attenuated by giving the rats per os during the entire exposure period a complex of innocuous bioactive substances expected to increase the organism’s antitoxic resistance.

This study describes KPC-204, a novel variant of Klebsiella Pneumoniae carbapenemase, characterized by a KDD amino acid insertion at Ambler position 269 deviates from KPC-2. This variant was identified in an ST11-type clinical isolate of carbapenem-resistant Klebsiella Pneumoniae from China. Notably, KPC-204 exhibits resistance to both ceftazidime-avibactam and carbapenems. Genetic analysis revealed that blaKPC-204 was located on a highly mobile IncFII/IncR plasmid within a complex genetic structure that facilitates its spread. Functional analysis, achieved through cloning into E. coli DH5α, validates KPC-204's contribution to increased resistance to ceftazidime-avibactam. The kinetic parameters showed that KPC-204 exhibited similar affinity to KPC-2 toward ceftazidime and reduced sensitivity to avibactam. Mating experiments demonstrated the resistance's transmissibility. This investigation underscores the evolving diversity of KPC variants affecting ceftazidime-avibactam resistance, highlighting the necessity for continuous monitoring.

Background: Surveys conducted in different regions of the world showed that the prevalence rates of health risk behaviors (HRBs) in university students are sometimes higher than those found in non-university populations. This study aims to identify the prevalence rates and demographic and academic environment correlates associated with HRBs among Brazilian university students. Methods: In a cross-sectional epidemiological study, a random sample of 5,310 university students answered an online questionnaire with demographic (sex, age, skin color, marital status, and paid work) and academic setting information (housing type, size of campus, year and shift of study), as well as items clustered in four HRB domains: personal safety and violence, sexual behavior and contraception, addictive substance use, and eating habits, physical activity, and sleep. The data were analyzed statistically using bivariate analysis and hierarchical multiple regression. Results: The highest prevalence rates occurred in HRBs clustered in the domain of eating habits, physical activity, and sleep (> 60%), while HRBs for personal security and violence were less prevalent (

Geochemical mapping of river sands in the Manufahi area of Timor-Leste revealed potential areas for future mineral exploration. River sand samples from the study area were collected and geochemically analyzed to identify anomalous concentration distributions of several valuable elements and locate potential target areas and geological formations that may host mineral deposits. The 26 major and minor elements were identified using wavelength-dispersive X-ray fluorescence. The river sands exhibited varying elemental concentrations, with Cr, Cu, Zn, and Ba showing deviations from the normal distribution patterns. Identification of geochemical anomalies is an important task in mineral exploration geochemistry. The mean + 2 standard deviations (mean+2STD), median + 2 median absolute deviations (median+2MAD), and Tukeyâs inner fence (TIF) methods were used to determine the geochemical thresholds. This study shows that TIF and principal component analysis (PCA) methods are highly effective in calculating appropriate threshold values and identifying relevant elemental associations. These approaches have proven useful for delineating target areas for mineral deposits, resulting in reliable outcomes. Four predicted target areas with high potential for deposits and mineralization anomalies of Cr, Cu, Ni, and Ba were delineated in the study area.

For broadcast spawning invertebrates such as the crown-of-thorns starfish, early life history stages (from spawning to settlement) may be exposed to a wide range of environmental conditions, and could have a major bearing on reproductive success and population replenishment. Arrested development in response to multiple environmental stressors at the earliest stages can be used to define lower and upper limits for normal development. Here, we compared sperm swimming speeds and proportion of motile sperm and rates of fertilization and early development under a range of environmental variables (temperature: 20-36°C, salinity: 20-34 psu, and pH: 7.6-8.2) to identify environmental tipping points and thresholds for reproductive success. We also tested the effects of water-soluble compounds derived from eggs on sperm activity. Our results demonstrate that gametes, fertilization, and early development are robust to a wide range of temperature, salinity, and pH levels that are outside the range found at the geographical limits of adult distribution and can tolerate environmental conditions that exceed expected anomalies as a result of climate change. Water-soluble compounds associated with eggs also enhance sperm activity, particularly in environmental conditions where sperm motility is initially limited. These findings suggest that fertilization and embryonic development of crown-of-thorns starfish are tolerant to a wide range of environmental conditions, though environmental constraints on recruitment success may occur at later ontogenic stages.

The application possibilities of austenitic stainless steels in high friction, abrasion and sliding wear conditions are limited by their inadequate hardness and tribological characteristics. In order to improve these properties, thermochemical treatment of their surface by plasma nitriding is suitable. This article is focused on corrosion resistance of the conventionally plasma nitrided AISI 304 stainless steel (530 °C, 24 hours) in 0.05 M and 0.5 M sodium chloride solutions at room temperature (20 ± 3 °C), tested by potentiodynamic polarization and electrochemical impedance spectroscopy. The optical microscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy are used for the nitrided layer characterization. The experiment results point to a significant reduction in corrosion resistance after performed plasma nitriding even in a solution with a very low chloride concentration (0.05 mol/L).

The oxidative stress is one of the main cause for cardiovascular diseases (like Hypertension) also one of the results of these diseases. This study involved 56 subjects matched ages and sex divided into two groups; 28 hypertensive subject and 28 healthy subject as control group. The following analysis was done: 4-Hydroxy-2-nonenal(4HNE) and albumin. The results show that there is a significant increase in (4HNE) between patients group and control group. The increase in 4HNE which is a product of lipid peroxidation is attributed to destruction in body cell caused by due to the increase in stress events. It has been concluded that is important nappy on ideal weight, because obesity considered main factors for heart disease and hardening of the arteries. The aim of this study was to investigate the relationship between of some oxidative stress markers and cardiovascular diseases.

Severe acute respiratory syndrome coronavirus type 2 (SARS-CoV-2) utilizes Angiotensin Converting Enzyme 2 (ACE2) as its main receptor for cell entry. We have bioengineered a soluble ACE2 protein termed ACE2 618-DDC-ABD that has increased binding to SARS-CoV-2 and prolonged duration of action. Here we investigated the protective effect of this protein when administered intranasally to k18-hACE2 mice infected with the aggressive SARS-CoV-2 delta variant. k18-hACE2 mice were infected with the SARS-CoV-2 delta variant by inoculation of a lethal dose (2x104 PFU) and followed for up to 14 days. ACE2-618-DDC-ABD (10mg/kg) or PBS was administered intranasally six hours prior and 24 and 48 hours post viral inoculation. All animals in the PBS-control group had succumbed to the disease on day 7 post infection (0% survival) whereas, by contrast, there was only one casualty in the group that received ACE2-618-DDC-ABD (90% survival). Mice in the ACE2-618-DDC-ABD group had minimal disease as assessed by a clinical score and stable weight and both brain and lung viral titers were markedly reduced. These findings demonstrate the efficacy of a bioengineered soluble ACE2 decoy with extended duration of action in protecting against the aggressive delta SARS-CoV-2 variant. Together with previous work these findings demonstrate the universal protective potential against current and future emerging SARS-CoV-2 variants.

The digital age has ushered in unprecedented connectivity and convenience, but it has also given rise to escalating cyber threats and privacy concerns. This study examines the intricate balance between technological advancement and personal privacy in the face of evolving cyber risks. A comprehensive literature review was conducted, analyzing peer-reviewed articles, government reports, and industry white papers from the past decade. Additionally, case studies of major data breaches and privacy violations were examined. Surveys and interviews with cybersecurity experts, policymakers, and privacy advocates were conducted to gather diverse perspectives. The research reveals a significant increase in both the frequency and sophistication of cyber-attacks, coupled with a growing public awareness of privacy issues. However, there is a notable disconnect between individuals' stated privacy concerns and their online behaviors. Regulatory efforts to protect privacy often lag behind technological advancements and cyber threats. Maintaining equilibrium between technological progress and privacy protection requires a multifaceted approach involving enhanced cybersecurity measures, updated regulations, and improved digital literacy. The study underscores the need for ongoing collaboration between government, industry, and academia to address this complex challenge.

HER2/neu positive breast tumors predict a high mortality and comprise 25-30% of breast cancer. We have shown that Flavokawain A (FKA) preferentially reduces the viabilities of HER2 overexpressing breast cancer cell lines (i.e. SKBR3 and MCF7/HER2) versus those with less HER2 expression (i.e. MCF7 and MDA-MB-468). FKA at cytotoxic concentrations to breast cancer cell lines also has minimal effect on the growth of non-malignant breast epithelial MCF10 cells. FKA induces G2M arrest in cell cycle progression of HER2 overexpressing breast cancer cell lines through inhibition of Cdc2 and Cdc25C phosphorylation and down-regulation of Myt1 and Wee1expression leading to increased Cdc2 kinase activities. In addition, FKA induces apoptosis in SKBR3 cells by increasing the protein expression of Bim and BAX and decreasing expression of Bcl₂, Bcl_x/L , XIAP and survivin. FKA also down-regulates the protein expression of HER-2 and inhibits AKT phosphorylation. Herceptin plus FKA treatment leads to enhanced growth inhibitory effect on HER-2 overexpressing breast cancer cell lines through down-regulation of Myt1, Wee1, Skp2, Survivin and XIAP. Our results suggest the promise of FKA as a novel apoptosis inducer and G2 checkpoint abrogating agent in combination with Herceptin for treatment of HER2 overexpressing breast cancer.

Recent findings support an association between childhood maltreatment and the presence of elevated psychopathic traits in adulthood. Using a community sample recruited online (N = 210), we sought to (1) confirm the relationship between childhood traumas and psychopathic traits, and (2) investigate the role of parenting styles in psychopathic traits. Consistent with our predictions, we found an association between all types of childhood traumas and disinhibition. Age and gender moderated the relations between psychopathic traits and childhood maltreatments. Parental rejection and overprotection were positively correlated with the presence of psychopathic traits, while parental emotional warmth was negative correlated. Although our results converge with previous findings, the strength of the correlations observed was not as compelling as in research on undergraduate students. We discuss the numerous interpretations for our findings, and highlight the limitations of research in the field of psychopathy and childhood trauma in the general population.

A common problem in education has always been to get students to achieve an adequate level of motivation and engagement. Many evidences show that gamification has the potential to make learning more engaging, motivating and effective. However, it is essential to design gamified experiences thoughtfully, ensuring that they align with educational objectives and promote meaningful learning outcomes, and so the lack of established design methodologies can lead to unintended consequences.

In this study, we evaluate the nonlinear dynamics of convection flow using the thermodynamic variational principle, focusing on scenarios where multiple external forces, such as a thermal gradient and rotational field, are applied to a shallow annular pool. We observed that with the increase in the thermal gradient, the flow changed from an axial flow to a rotational oscillatory flow with the wave amplitudes aligned. Further increasing the temperature difference led to a rotational oscillatory flow characterized by alternating wave generation and annihilation. Our analysis of the flow, considering heat fluxes orthogonal to the thermal gradient, allowed us to describe the flow state as a phase at equilibrium. The state transition of the flow was accompanied by a discontinuous jump in the heat flux, which occurred at the intersection of the entropy production curves.

The electrical percolation of alternating current through two-phase polyethylene/graphite composite electrodes with different contents of graphite microparticles immersed in aqueous KCl solutions has been studied. Above the graphite content of the first percolation threshold, the electrochemical impedance response of this electrode is associated with an equivalent circuit of resistance Ru in series with a constant phase element CPE. An insulator material+conductive filler model is proposed in which the electroactive surface is considered as the intersection of the percolation cluster through the solid and the cluster associated with the interfacial region. CPE is analyzed assuming a distribution of micro-capacitors of the graphite particles in contact with the dielectric solution and inside the dielectric polymeric phase.

Smart Dental Materials refer to materials used in dentistry with additional functionality to enhance treatment outcomes, which may improve oral health. Smart materials for dental restorations can react to stimuli such as a specific temperature, a different pH, or mechanical stress, repair small cracks or damage by themselves, and interact beneficially with biological surroundings. For example, they might release ions and promote tooth remineralization or have antibacterial properties to prevent bacterial growth. Others can have enhanced mechanical properties like strength and wear resistance to ensure these materials can withstand the daily masticatory forces. This review presents our current comprehension of smart dental materials designed for tooth restoration. We focused on what these materials need to be effective, like durability, biocompatibility, and aesthetic requests, besides identifying new ideas for their design. A detailed analysis of the current challenges faced in formulating these materials, such as the balance between enough ions released with proper physicochemical properties and achieving the desired biological response, was discussed. We also discussed how these cutting-edge technologies are being leveraged to overcome existing limitations, creating more dental materials with potential clinical translation. The review also discusses the practical challenges in implementation and the prospects for these materials in dentistry.

This work focuses on the well-known issue of mass conservation in the context of the finite element technique for computational fluid dynamic simulations. Specifically, non-conventional finite element families for solving Navier-Stokes equations are investigated to address the mathematical constraint of incompressible flows. Raviart-Thomas finite elements are employed for the achievement of a discrete free-divergence velocity. In particular, the proposed algorithm projects the velocity field into the discrete free-divergence space by using the lowest-order Raviart-Thomas element. This decomposition is applied in the context of the projection method, a numerical algorithm employed for solving Navier-Stokes equations. Numerical examples validate the approach’s effectiveness, considering different types of computational grids. Additionally, the presented paper considers an interface advection problem using marker approximation, in the context of multiphase flow simulations. Numerical tests, equipped with an analytical velocity field for the surface advection, are presented to compare exact and non-exact divergence-free velocity interpolation.

Artificial intelligence (AI) refers to computer algorithms that replicate the cognitive function of humans. Machine learning is widely applicable using structured and unstructured data, while deep learning is derived from the neural networks of the human brain that process and interpret information. During the last decades, AI has been introduced in several aspects of healthcare. In this review, we aim to present the current application of AI in the neonatal intensive care unit. AI-based models have been applied to neurocritical care, including automated seizure detection algorithms and electroencephalogram-based hypoxic-ischemic encephalopathy severity grading systems. Moreover, AI models evaluating magnetic resonance imaging contributed to the progress of the evaluation of the neonatal developing brain and the understanding of how prenatal events affect both structural and functional network topologies. Furthermore, AI algorithms have been applied to predict the development of bronchopulmonary dysplasia and assess the extubation readiness of preterm neonates. Automated models have been also used for the detection of retinopathy of prematurity and the need for treatment. Among others, AI algorithms have been utilized for the detection of sepsis, the need for patent ductus arteriosus treatmnet, the evaluation of jaundice, and the detection of gastrointestinal morbidities. Finally, AI prediction models have been constructed for the evaluation of the neurodevelopmental outcome and the overall mortality of neonates. Although the application of AI in neonatology is encouraging, further research in AI models is warranted in the future including retraining clinical trials, validating the outcomes, and addressing serious ethics issues.

Mobile health technologies enable continuous, quantitative assessment of mobility and gait in real-world environments, facilitating early diagnosis of gait disorders, disease progression monitoring, and prediction of adverse events like falls. Traditionally, mobile gait assessment predominantly relied on body-fixed sensors positioned at the feet or lower trunk. Here, we investigate the potential of an algorithm utilizing an ear-worn motion sensor for spatiotemporal segmentation of gait patterns. We collected 3D acceleration profiles from the ear-worn sensor during varied walking speeds in 53 healthy adults. Temporal convolutional networks were trained to detect stepping sequences and predict spatial relations between steps. The resulting algorithm, mEar, accurately detects initial and final ground contacts (F1 score of 99% and 91%, respectively). It enables determination of temporal and spatial gait cycle characteristics (among others stride time and stride length) with good to excellent validity at a precision sufficient to monitor clinically relevant changes in walking speed, stride-to-stride variability, and side asymmetry. This study highlights the ear as a viable site for monitoring gait and proposes its potential integration with in-ear vital sign monitoring. Such integration offers a practical approach to comprehensive health monitoring and telemedical applications, by integrating multiple sensors in a single anatomical location.

(1) Background: TNF inhibitors (TNFi) have revolutionized the treatment of rheumatoid arthritis (RA). However, 30-40 % of RA patients do not respond adequately to those biologics. In addition to neutralizing soluble TNF, TNFi have the ability to bind the transmembrane form of TNF, tmTNF. Importantly, tmTNF can act itself as a receptor that induces a “Reverse Signaling” (RS) in cells. We previously showed that certolizumab, a Fab’ TNFi, activates RS in human primary monocytes, at least in part through the transcription factor NRF2 that is known to regulate the expression of genes involved in anti-inflammatory response and oxidative stress. (2) Methods: Here, we have developed an assay for the prediction of clinical response of RA patients to TNF inhibitors. This assay is based on mRNA quantitation of CD36 activation and of 6 genes induced by NRF2 following tmTNF RS in fresh monocytes. (3) Results: We could predict the response to anti-TNF monoclonal antibodies (mAbs) with 93.3 % accuracy. However, our method was not suitable for the prediction of the response to TNF soluble receptor etanercept. (4) Conclusions: We have developed a rather simple, short-term, test that can be standardized. Predicting the response to TNF mAbs will help physicians offer the best available treatment and provide patients with personalized medicine.