Root crops grow in the soil deeply and bond with soil closely, which results in that the process of the separation between soil and root becomes the most difficult during the harvesting processes. In order to harvest root crops efficiently, the mechanical harvesting has become the main developing trend. However, high power and high damage rate are still occurred when mechanical harvester gets in touch with the roots. In this paper, we review the research of the development and evaluation of the mechanical harvesting of root crops and its performance optimization on the past years. The process of soil separation mainly consists in the initial separation between root and the ground and further separation between root and adhered soil. In general, the soil-cutting operation in the initial separation and the sieving mechanism in the further separation require high draught and power. And the dramatic friction, impact, pressure and so on, which happen in the components and soil-roots, are the key reasons to lead to root damage. The optimization of harvesting methods and parameters, including the digging shovel shape, working conditions, vibration, and screening way, is more significant in improving the harvesting performance. But there are still some limitations in the research and application of the mechanical harvester for root crops. Future research is suggested to focus on the development of the soil break-up when the digging shovel cutting soil, the insight into the interaction between soil and roots by different external compression loads, and the long-term studies to verify the high-efficiency and low-damage performances of mechanical harvester in practical application.

On the basis of the force and safety factor analysis of traditional retaining wall, a new analytical method of force and displacement of slope is suggested, the numerical theoretical solution of the stress distribution of the sliding body can be obtained under the conditions, which the stresses distribution are satisfied with the differential equilibrium equations, the boundary conditions, the compatibility equation and the macroscopic equilibrium equations. The interface stresses between the sliding body and the retaining wall are continuous, the theoretical solution of retaining wall stress distributions can be gotten, while the stress differential equilibrium equation, the compatibility equation, macroscopic force and moment balance equations are satisfied. The strain and displacement solutions can be obtained by using Duncan Chang and Hooke constitutive equations for the slope and the retaining wall respectively. The transfer station of landfill in the Guandukou Town of Badong County is taken as an example, the results of the sliding body and retaining wall analysis show: The stress and strain solutions of a slope and a retaining wall can be obtained by the proposed method, the forces between the retaining wall and the sliding body include shear stress and normal stress, and the stress distributions change with the deformation of the sliding body, the shape and material of retaining wall can be optimized according to the calculation results，it is feasible for the proposed analysis method of slope with retaining wall design to be run many years.

In recent years, the FDA has approved numerous antitumor drugs that are mutation-based for clinical use. These drugs have improved the precision of treatment and reduced adverse effects and side effects. Personalized therapy is a prominent and hot topic of current medicine and also represents the future direction of development. With the continuous advancements in gene sequencing and high-throughput screening, research and development strategies for personalized clinical drugs have developed rapidly. This review elaborated the recent personalized treatment strategies, which include artificial intelligence, multi-omics analysis, chemical proteomics, and computation aided drug design. These technologies rely on the molecular classification of diseases, the global signaling network within organisms, and new models for all targets, which significantly support the development of personalized medicine. Meanwhile, we summarized chemical drugs such as lorlatinib, osimertinib, and other natural products that deliver personalized therapeutic effects based on genetic mutations. This review also highlights potential challenges in interpreting genetic mutations and combining drugs, while providing new ideas for the development of personalized medicine and pharmacogenomics in cancer study.

The CuCrSn alloy is promising as high-strength and high-conductivity Cu alloy due to its relative low smelting requirement, while thus far reports on the CuCrSn alloy is still quite lacked. In this study, the microstructure and properties of Cu-0.20Cr-0.25Sn (wt%) specimens prepared under different rolling and aging combinations were comprehensively characterized, in order to reveal the effects of cold rolling and aging on the CuCrSn alloy. The results show that increasing the aging temperature from 400 ºC to 450 ºC can obviously accelerates the precipitation, and the cold rolling before aging significantly increases the initial microhardness and promotes the precipitation. Whereas, the deformation hardening will be eliminated during the aging process, making the microhardness even decrease monotonically when the aging temperature and the rolling ratio before aging are high. Performing the cold rolling after the aging can maximize the effects of precipitation strengthening and deformation strengthening, and its adverse impact on the conductivity is not serious. A tensile strength of 506.5 MPa and a conductivity of 70.33% IACS were obtained with such a treatment, only the elongation decreases. Different strength-conductivity combinations of the CuCrSn alloy can be achieved through appropriate combinations of the aging and post aging cold rolling conditions.

Using number theory, a formula is obtained that describes the thermal conductivities of ZrC, UC, UN, ThN, ZrN and Th_xU_1-xN at x = 0.2 and 0.5 with temperature change. This formula contains the atomic numbers of the elements, the thermal conductivities of the individual elements of the substance, and the structural parameter. There is no direct dependence on temperature in the formula, since it is hidden in the thermal conductivities of each element and in the structure parameter. In some temperature ranges, the structural parameter is constant; therefore, the thermal conductivity of some carbides and nitrides is expressed through summing the thermal conductivities of individual elements.

The vulcanization of rubber compounds is an exothermal process. A carbon black-filled and natural rubber-based (NR) formulation was mixed with different levels of sulfur (0.5, 1.0, 2.0, 4.0 and 6.0 phr) and studied with Differential Scanning Calorimetry (DSC) for the determination of the vulcanization enthalpy. It was found that the vulcanization enthalpy is dependent from the amount of sulfur present in the compound and the vulcanization heat released was -18.4 kJ/mol S if referred to the entire rubber compound formulation or -46.0 kJ/mol S if the heat released is referred only to the NR present in the compound. The activation energy for the vulcanization of the rubber compounds was also determined by a DSC study at 49 kJ/mol and found quite independent from the sulfur content of the compounds under study. A simplified thermochemical model is proposed to explain the main reactions occurring during the vulcanization. The model correctly predicts that the vulcanization is an exothermal process although it gives an overestimation of the vulcanization enthalpy which is larger for the EV vulcanization package and smaller for the conventional vulcanization system. If the devulcanization is conducted mechanochemically in order to break selectively the sulfur-based crosslinks, then the natural rubber compounds recovered from used tires can be re-vulcanized again and the exothermicity of such process can be measured satisfactorily with DSC analysis. This paper not only proposes a simplified mechanism of vulcanization and devulcanization but also proposes an analytical method to check the devulcanization status of the recycled rubber compound in order to distinguish truly devulcanized rubber from reclaimed rubber.

Mining is an important industry, accounting for 6.9% of global GDP. However, global development promotes accelerated demand, resulting in the accumulation of hazardous waste in land, sea, and air environments. It reached 7 billion tonnes of mine tailings generated yearly worldwide, and 19 billion solid tailings will be accumulated by 2025. Adding to this, the legacy of environmental damage from abandoned mines is worrying; in Canada there are around 10,000 abandoned mines, 50,000 in Australia, 6,000 in South Africa, and 9,500 coal mines in China, reaching 15,000 by 2050. In this scenario, restoration techniques from mining tailing have become increasingly discussed among scholars due to their potential to offer benefits towards reducing tailings levels, thereby reducing environmental pressure for the correct management and adding value to previously discarded waste. This review paper explores available literature on the main techniques of mining tailing recycling and reuse and discusses leading technologies, including the benefits and limitations, as well as emerging prospects. The findings of this review serve as a supporting reference for decision-makers concerning the related sustainability issues associated with mining, mineral processing, and solid waste management.

The bacterial flagellum is a motility organelle, consisting of a long helical filament as a propeller and a rotary motor that drives rapid filament rotation to produce thrust. Salmonella enterica serovar Typhimurium has two genes of flagellin, fljB and fliC, for flagellar filament formation and autonomously switches their expression at a frequency of 10^-3–10^-4 per cell per generation. We report here differences in their structures and motility functions under high viscosity conditions. A Salmonella strain expressing FljB showed a higher motility than the one expressing FliC under high viscousity. To examine the reasons for this motility difference, we carried out structural analyses of the FljB filament by electron cryomicroscopy and found that the structure is nearly identical to that of the FliC filament except for the position and orientation of the outermost domain D3 of flagellin. The density of domain D3 was much lower in FljB than FliC, suggesting that domain D3 of FljB is more flexible and mobile than that of FliC. These differences suggest that domain D3 plays an important role not only in changing antigenicity of the filament but also in optimizing motility function of the filament as a propeller under different conditions.

The purpose of this work is to define optimal growth conditions for batch culture of the cyanobacterium Arthrospira maxima and the microalgae Chlorella vulgaris, Isochrysis galbana and Nannochloropsis gaditana. Thus, we study the effect of three variables on algae growth: i.e., inoculum:culture medium ratio, light:darkness photoperiod and type of culture medium, including both synthetic media and wastewaters. The results showed that the initial inoculum volume did not affect the amount of biomass at the end of the growth (14 days), whereas an excess (18 h) or defect (6 h) in the number of hours of light is determinant for its development. The contribution of nutrients from different culture media modified the growth of the different species. A. maxima was favoured in seawater enriched with Guillard's F/2 as well as C. vulgaris and N. gaditana but in fresh water medium. I. galbana had the greatest growth in the marine environment enriched with Walne’s media. Nitrate was the limiting growth reagent at the end of the exponential phase of growth for C. vulgaris and N. gaditana, while iron was for A. maxima and I. galbana. All species demonstrated their capability to grow in effluents from a wastewater treatment plant and they efficiently consume nitrogen, especially the three microalgae species.

Infant foods and formulae may contain toxic substances and elements which can be neo-formed contaminants or derived from raw materials or processing. The content of minerals, toxic elements and hydroxymethylfurfural in infant foods and formulae were evaluated. The effect of storage temperature on HMF formation in infant formulae and its potential as a quality parameter was also evaluated. Prune-based foods contained the highest HMF content. HMF significantly increased when storage temperature was elevated to 30 ℃ for 21 days. All trace elements were present in adequate amounts while the concentration of nickel was higher when compared to those of other studies. The study indicates that HMF can be used as quality indicator for product shelf-life and that the concentrations of minerals and toxic elements vary greatly due to the diverse compositions of foods and formulae. Such contaminants need to be monitored as infants represent a vulnerable group compared to adults.

Spatial data conflation plays a fundamental role in in many aspects of modern Geographic Information Systems (GIS) research and development such as geospatial data visualization, incremental updating of databases and disaster evaluation. The primary objective of conflation is to derive valuable information based on the comparison of multiple spatial data sources of homogeneous or heterogeneous nature. This paper reviews the state of art of the concept of conflation, feature matching, the most important progresses of conflation between image and road network data, and the complexity of spatial conflation.

Co-integration and Causality was built to conduct studies on causality relation between carbon intensity and coal consumption leading to providing important basis for the transition to a low carbon economy. The EG two-step method was performed to study the relation between carbon intensity and coal consumption of China during 1990-2015 and the co-integration and Granger test was constructed to build up the co-integration and error correction models for analysis of the interaction between carbon intensity and coal consumption. The results showed that in long term there is a stable co-integration relation and a positive correlation between carbon intensity and coal consumption; whereas fluctuations exist in short term and there is a one-way Granger causality of carbon intensity with respect to coal consumption.

Background: Poisoning constitutes an important part of morbidity and mortality among environmental emergencies that can be prevented, frequent in childhood, requiring rapid diagnosis and treatment. This study aimed was to examine the epidemiological, clinical and therapeutic characteristics of drug and corrosive poisonings in terms of children. Materials and Methods: Between January 2010 and December 2018, 1678 patients between the ages of 1-16 who applied to the emergency department with drug and corrosive poisoning were included in the study. The patients were divided into three groups as 1-5, 6-11 and over 12 years of age, and the substances with known pharmacological agents were divided into 10 groups. The Zargar Classification (7) was used to determine the degree of damage caused by corrosive substances in the esophagus. Results: The mean age of the patients was 8.32 ± 3.23 years (1-15 years). The girl/boy ratio of the cases was 1.18 / 1 and 54.3% were girls. 18.9% of the cases were under five years of age, 61% were between 6-11 years and 20% were older than 12 years. 94.6% of the patients were poisoned by drugs and 5.4% of them were poisoned due to non-drug reasons. Accidental poisoning was most commonly seen in children aged 6-11 and suicides were seen in children older than 12 years. It was found that 62.2% of the poisonings were accidental and 37.8% were suicidal. The most common causes of poisoning were analgesics and paracetamol exposure as a pharmacological agent. Mortality was found to be most common in 1-5 years age group and accidental poisonings. Accidental poisoning was common in girls and suicidal poisoning was common in boys. Grade 3 damage was found endoscopically in all of the mortalities due to corrosive substances. Conclusion: It was found that accidental poisoning was observed in children under five years of age, suicides were observed in children older than 12 years and the most important cause of mortality was due to corrosive substances. Cause-specific rapid diagnosis and treatment will contribute to the reduction of morbidity and mortality.

The paper presents new data on mineralogical-geochemical peculiarities of the granites and pegmatites of the Baikal area (Olkhon Region) with implications for the age, generation conditions and geodynamic settings of magmatism. The early Paleozoic granitoids of the Olkhon region are syncollisional formations produced from the gneiss-schistose substratum of the Olkhon metamorphic sequences. Pegmatoid granites and pegmatites of the Region were generated within a wide age range (458-390 Ma) and include different mineralogical and geochemical types. Amongst the Early Paleozoic granitoids, pegmatoid rocks are products of the collisional magmatism evolution and are similar to granites in terms of the mineral composition and distribution patterns of rare and rare earth elements. On the Olkhon island (Baikal lake) the pegmatite of the Tashkiney vein belong to the Be-Nb-Ta mineralogical-geochemical type demonstrating high contents of W, Sn U, Th and very low concentrations of Li and volatile components (F, B). In the Pryolkhonye area, vein pegmatite Iliksin is with Li, Be, Nb, Ta mineralization (lepidolite, vorobyevite, samarskite et al). The studied pegmatite veins are similar both by the profound negative Ba, Sr, Eu, and Zr anomalies. The zircons from the Tashkiney vein (390±5.0 Ma) and of the Iliksin vein (430.1±2.2 Ma, U-Pb isotope LA ICP MS metod) indicate the formation of pegmatite at the late post-collisional stage of magmatism in the Olkhon Region. As regard to mineralogical and geochemical characteristics, vein pegmatites with amazonite (Ainsky and Ulan-Nur) belong to the Li-F type. The tantalum mineralization, represented by microlites and minerals of the columbite-tantalite group is associated with the Ainsky amazonite pegmatite. As opposed to the Early Paleozoic syncollisional granitoids and pegmatoid formations, the middle Paleozoic vein bodies of pegmatites (Tashkiney, Iliksin, Ainsky, Ulan-Nur) are regarded as rare-metal pegmatites. In terms of geochemical characteristics, they are similar to the rare-metal pegmatoid granites and pegmatites of the intra-plate setting widespread in Mongolia and Transbaikalia. The rare-metal mineralization in the Olkhon region may be genetically related to the evolution of Be-Nb-Ta and Li-F types of the post-collisional granites and pegmatites.

Toxoplasmosis is a zoonosis of warm-blooded animals, affecting also humans, caused by Toxo-plasma gondii, an obligate intracellular parasite with a complex biological cycle. Toxoplasmosis is considered a re-emerging zoonosis and an important public health threat, also for the absence, up to now, of efficient vaccines and preventive measures. Sources of transmission to humans are environmental or food-borne, mainly through the consumption of raw and undercooked meat, predominantly of Sus scrofa, considered highly susceptible to T. gondii. Mainly in the last dec-ades, an effective strategy to counter animal infectious diseases was based on the discovery of resistance immuno-genetic markers, possibly to be used for association studies between geno-typic and phenotypic traits and consequently in Marker Assisted Selection. Until now, this gen-otyping approach has never been adopted for T. gondii infection, so this study aimed, for the first time, to fill this gap. In particular, pigs, reared in different farms of Central Italy, were serologically characterized by an ELISA assay performed on diaphragm meat juice. Out of 179 tested animals, 98 resulted seropositive (54.74%), 57 seronegative (31.84%) and 24 doubtful (10.6%), underlining a possible re-emerging diffusion of this protozoan in the investigated areas. Atten-tion was firstly focused on IL-18 gene, encoding for a pro-inflammatory cytokine that plays a key role starting from the upstream steps of the immunity pathway towards T. gondii. A RT-PCR assay followed by Sanger sequencing of IL-18 cDNA was de novo developed. For this interleukin, at this stage, genetic analysis has not highlighted significant polymorphic variations compared to the reference sequence, except for a seropositive animal. However, the outcomes of this pre-liminary innovative study will be investigated in depth analyzing other relevant genetic re-gions and other target genes.

This paper delves into the comprehensive analysis and investigation of thermodynamic enhancement and exergy optimization of turbofan engines through the integration of fuzzy logic and newest meta-heuristic optimizers, like the Artificial Bee Colony (ABC) and Particle Swarm Optimization (PSO). In contemporary engineering practices, exergy analysis stands out as a crucial and indispensable tool utilized by numerous engineers and researchers in the design, operation, and performance evaluation of energy systems. Its multifaceted advantages include the precise determination of location, types, and quantification of exergy losses and production. By augmenting exergy efficiency while concurrently curbing exergy destruction, substantial enhancements in engine performance and cost reduction can be achieved. The study focuses on the CF6-80A and CFM56 turbofan engines, scrutinizing individual components such as the fan, low-pressure compressor, high-pressure compressor, combustion chamber, high-pressure turbine, and low-pressure turbine. Key parameters for engine evaluation encompass exergy efficiency, recovery potential, relative exergy destruction, fuel depletion rate, and inefficiency. To conduct a rigorous exergy analysis, engine modeling is imperative, particularly during the cruise phase, which predominantly characterizes engine operation. Subsequently, exergy analysis is executed in accordance with established thermodynamic principles, leveraging equations governing mass conservation, energy conservation, and exergy conservation for each engine component. Further optimization of exergy destruction is achieved through the application of meta-heuristic optimizers and fuzzy logic, facilitating informed decision-making processes.

Diarrhea and fever are prevalent childhood illnesses with potentially severe consequences, especially when they co-occur. This study investigates the prevalence and determinants of diarrhea, fever, and their coexistence among children under-five in Bangladesh. Data from the 2017-18 Bangladesh Demography and Health Survey (BDHS) were analyzed using multivariable stepwise logistic regression with backward selection. This study found that 5.0% for diarrhea, 34.0% for fever, and 3.0% for the coexistence of both illnesses. Common factors associated with childhood diarrhea and fever included the mother's education, her attitude toward wife-beating, and the child’s age (12-23 months). Diarrhea was associated with households with improved water sources and children in the Barisal division, while fever was linked to underweight children and those from more affluent backgrounds. The coexistence of both was significantly linked to underweight children, higher birth orders, and children from the Rajshahi division. Notably, child illnesses were associated with parental education, higher socio-economic status, and access to improved drinking water sources. Diarrhea affects one in 20 children, fever affects one in three, and the coexistence of both conditions affects one in 35 children in Bangladesh. The findings need further research and policy reviews to develop effective interventions and improve child health in Bangladesh.

The functional capacity of the cervical spine plays a central role in healthy living. This study evaluated and created a comprehensive strength, range of motion (ROM), and musculoskeletal pain profile of the cervical spine in young adults. 60 physically active individuals (30 males/30 females; 19-24 year-old) participated in the study. Cervical ROM (forward flexion, extension, lateral flexion, and rotation), maximal isometric strength (forward flexion, extension, lateral flexion), and musculoskeletal pains were assessed using an electronic goniometer, a handheld dynamometer, and the Nordic questionnaire, respectively. Data analysis revealed that: a) fe-males had higher ROM values, during extension and lateral flexion, than males (p<0.05), b) males had higher absolute strength values than females in all movement directions, higher rela-tive strength values/body mass (at forward flexion) and flexion/extension ratio values (p<0.05), c) ROM and strength values were not significantly different between right-left sides (p>0.05), d) a great proportion (43.3%) of the participants had cervical pains (no sex-related differences) and e) cervical strength showed significant small negative correlation with pains (p<0.05; r=-0.225 to -0.345). The reference values created may be used by health and fitness professionals to exten-sively evaluate the cervical spine and to design specific exercise programs for injury prevention and rehabilitation.

This article is a commentary on the publication Guo J, Hai H, Ma Y. Application of extracorporeal shock wave therapy in nervous system diseases: A review. Front Neurol. (2022) 13:963849. doi: 10.3389/fneur.2022.963849 (1). In the opinion of the authors of this commentary the information provided in the Section "Principles of ESWT" in (1) is partly incorrect and misleading. This is due to the fact that important, published knowledge regarding focused extracorporeal shock wave therapy (fESWT) and radial extracorporeal shock wave therapy (rESWT) was disregarded in (1).

Abstract: Background: The practice of menstrual hygiene(MH) is a public health issue and depends on various factors. Taboos and incorrect MH practices can lead to health hazards. This study aimed at assessing the Knowledge, Attitude, and Practice of MH among the female students and faculty of Medical and Health Sciences University. Materials and methods: This cross-sectional questionnaire survey between February and June 2023 using consecutive sampling. Univariate analysis and comparisons were done with a significant p-value <.05. Results: A total of 253 women participated in the study. The knowledge and practices of MH were good. There were significantly more irregular and painful periods in younger females (p=.005,.0001). 89% of women used disposable pads and least used menstrual cups. Younger women were unaware of menstrual cloth. The attitude towards menses varied, with younger females feeling annoyed (p=.002), and older females embarrassed (p=.0001) at menarche. About 1/3rd of participants perceived menstrual blood as unhygienic. Younger women were more open about talking about menses (p=.005). Conclusion: There was good knowledge and practices of MH among participants. There were differences in menstrual history and attitude among older and younger women. The attitude and beliefs vary among the participants, due to sociocultural factors and age differences.

This study was to determine the effects of different irrigation, fertigation and mulching applications on the yield and quality parameters of strawberries. The study was conducted at the Bursa Uludağ University Yenişehir Ibrahim Orhan Vocational School Agricultural Research Field in 2019-2020. In the research, four different irrigation topics, three different fertigation and three different mulching topics were selected The maximum and minimum yield values of the study years were calculated as 5.05-18.70 t ha-1 and 1.20-8.7 t ha-1, respectively, from I100F100M1 and I25F50M0 treatments. As a result, a three-factor study determined that irrigation, fertigation, and mulching had a significant effect on the yield and quality characteristics of strawberries. However, when the reductions in yield and quality losses are evaluated together, despite the reductions in irrigation water and fertigation levels, I75 and F75 topics can be recommended. Also, in mulching treatments, black mulch material (M1) should be chosen over clear mulch material (M1) and no mulch (M0).

Silver in different forms is used for medical purposes from ancient times. It is not yet well known, which form of silver is more biocompatible and less toxic. Here we considered silver nanoparticles and silver citrate. Also, the relationships of neurotoxicity of silver compaunds with ageing factor is not yet described. To assess the role of nanoform in neurotoxicity of silver and role of ageing a long-term experiment was conducted. We had four control groups of intact mice and four experimental groups which were exposed to silver nanoparticles and silver citrate for two months. Four groups of mice were introduced into the experiment since the age of five months to assess ageing factors. It was shown that the nanoform does play a certain role in neurotoxicity of silver. Silver citrate seems to be a more preferable silver compound. Ageing can be regarded as a positive factor that neutralizes toxic action of silver compounds. It may be due to the development of physiological/cognitive functions with the age as well as adaptation to unnatural content in the individual cages that is definitely stressful for mice.

To date, most people prefer softer and stickier rice with high glycaemic index, which has led to the study of the association between the dietary fibre profile and the textural properties to balance between the eating quality, and health benefits. A slight variation was observed in the dietary fibre composition among rice varieties with different amylose content. The percentage of insoluble dietary fibre (IDF) in whole grain rice varied from 1.65–4.32 while the percentage of soluble dietary fibre (SDF) ranged from 0.26–1.37. We demonstrated that the SDF/IDF ratio was higher in soft texture rice with low amylose and it shared a negative correlation with hardness and chewiness of cooked whole grain rice determined by a texture analyser, which suggested that the distribution of SDF throughout the rice endosperm influences the reduction of the hardness of cooked rice. According to the importance of dietary fibre, we proposed a simple linear regression method to estimate the amount of IDF and total dietary fibre with r = 0.97 and 0.92, respectively, of whole grain rice based on its bran layer, determined by the alternative alkaline method. Furthermore, low amylose rice has higher content of -glucan and pectin, which are classified as soluble dietary fibre, than high amylose rice. The percentage of -glucan and pectin in whole grain rice ranged from 0.03 and 0.07 respectively, for high amylose rice to 0.14 and 0.27 respectively for low amylose rice,

This paper aims to establish a current relationship between pharmaceutical sciences and the development of perfumes and fragrances, which bring significant economic benefits and whose added value is among other professionals, the one made by professionals in Pharmacy. For this purpose, historical data are used as a starting point and galenic, chemical and botanical aspects are discussed in a transversal way. In this sense, it must be taken into account that in the case of Spanish pharmacy, it is closely linked to the knowledge and use of plants. Sources such as Web of Science (WOS) and databases such as Scopus, monographs and various web pages (where scientific-technical documents appear) have been used. The results and discussion are based on the selection of the 50 plant species most commonly used in high quality fragrances. Therefore, this publication should be considered as an approach to this subject based on an analysis of a representative sample of data. Some characteristics of perfumes (classification according to the concentration of essential oils and combination of plant extracts) are presented beforehand. They also briefly compile the traditional and modern ways in the treatment of these extracts. The main focus of this work is the botanical and chemical analysis of these described plants, pointing out their common name, correct botanical name, geographical place of origin, used part of the plant and main molecules. The 50 botanical species belong to 27 families of angiosperms and are represented in a large part of the phylogenetic tree of botanical systematics. The most significant families are aromatic: Rutaceae (16.7%), Lamiaceae (16.7%) and Apiaceae (6.5%). The most represented genus is Citrus (with seven species or hybrids). However, it should be noted that natural extracts of good quality natural fragrances may be supplemented with chemically synthesized molecules. Of the 50 botanical species selected, 84% of the extracts have their origin in Tropical Asia, the Middle East and the Mediterranean region. This figure generally coincides with the percentage of medicinal plants (or their extracts) admitted by the European Pharmacopoeia. All parts of a plant (depending on which one it is) can be a source of molecules for the elaboration of these products. The most commonly used parts to obtain extracts are flowers (34%) and leaves (30%), a biological circumstance that is explained in this work. On the opposite side are the resins (10%), rhizomes and roots (8%). In this work, 110 molecules have been found that are part of the essences of perfumes and fragrances, the most frequent are: linalool, limonene, 1,8-cineole, eugenol and derivatives, geraniol, vanillin and derivatives, β-cariophyllene, p-cmene and farnesene and derivatives (3.64%). However, in order to elaborate a quality perfume, many other molecules must be taken into account, according to the creative experience of the perfumer, which is subject to confidentiality and chemical analysis according to current legislation, which would avoid fraud, allergy and dermatitis problems.

Trigonella foenum is one of the oldest medicinal plants that grow in many parts of Iran with the diverse ecological situation. Employing this plant for treating diabetes and high cholesterol has a long history, because of some metabolites. Due to the habitat of fenugreek is a wide range of climatic conditions, it may have power to cope with climate variation. The main intention of this inquiry was to understand the effect of the environmental variables on this therapeutic plant features. It was also interesting for us to understand which environment variables are more impressive for enhancing of trigonelline and 4-hydroxy isoleucine content as the most important metabolites of this plant. For achieving this goal, environmental information and vegetal data were analyzed to discover the role of nature on the seed part of fenugreek life in 50 different regions of Iran. Canonical correspondence analysis (CCA) displayed that high content of metabolites and some morphological characteristics happened in high temperature and solar irradiation. Partial least squares regression (PLSR) and path analysis used to find the best predictors and direct and indirect effect of all variables on 4-hydroxy isoleucine and trigonelline. Ecological condition were the best predictors and had the highest direct and indirect impact on 4-hydroxy isoleucine. However, for trigonelline, the environment did not play a senior role. It seems that the reaction of components of fenugreek does not follow the same way. Studying on morphological, primary and secondary metabolites, and surrounding environment of fenugreek, helped us to have a more precise judgment about the life of this plant.

This work addresses the challenge of EEG visual multiclass classification into 40 classes for Brain-Computer interface applications, by using deep learning architectures. The visual multiclass classification approach offers BCI applications a significant advantage, since it allows the supervision of more than one BCI interaction, considering that each class label supervises a BCI task. However, because of the nonlinearity and nonstationarity of EEG signals, performing multiclassifiers based on EEG features remains a significant challenge for BCI systems. In the present work, mutual information-based discriminant channel selection and Minimum-Norm Estimate algorithms are implemented to select discriminant channels and enhance EEG data. Hence, deep EEGNet and Convolutional-recurrent neural networks are implemented separately to classify EEG data of image visualization into 40 labels. By using the k-fold cross-validation approach, average classification accuracies of 94.8% and 89.8% were obtained by implementing the aforementioned network architectures, respectively. Satisfactory results obtained with this method offer a new implementation opportunity for multi-task BCI applications by utilizing a reduced number of channels (&lt;50%), compared to those presented in the related literature where the whole set of channels is used.

This review explores the transformative role of artificial intelligence (AI) in the entire winemaking process, from viticulture to bottling, with a particular focus on enhancing food safety and traceability. It discusses AI’s applications in optimizing grape cultivation, fermentation, bottling, and quality control, while emphasizing its critical role in managing microbiological risks such as mycotoxins. The review aims to show how AI technologies not only refine operational efficiencies but also raise safety standards and ensure traceability from vineyard to consumer. Challenges in AI implementation and future directions for integrating more advanced AI solutions into the winemaking industry will also be discussed, providing a comprehensive overview of AI's potential to revolutionize traditional practices.

Historical and Endowment Properties are different from Heritage and cultural Properties, as Historical and Endowment properties are governed by a unique set of laws that Waqf recipients must abide by. Property that is entrusted is usually in the form of buildings, land or valuables which in preservation is not limited to time as long as the property can be utilized. Reliable information technology is needed to ensure data security both digitally and physically, while the rapid development of information technology demands information openness and this will be a challenge in itself. The objectives of this study include examining the collection of historical databases and endowments, the relationship between digital data and physical data and management organizations. The method of how to design a query model to display data is then analyzed whether the data conforms to the rules in waqf management. The results are expected to bring up accurate data between digital data and physical data and if there are differences into findings for the next analysis.

This study compared the mineral content and bioactive properties of flowers and fruit coming from wild elderberry plants with those of flowers and fruit harvested from elderberry cultivars grown in an orchard. Elderberry fruit and flowers were analysed for the content of selected minerals, phenolic compounds and anthocyanins and for antioxidant activity. Mineral content was determined by atomic absorption spectrometry method, while antioxidant activity and the content of polyphenols and anthocyanins were determined by spectrophotometric methods. Flowers were found to contain more total ash and to have much higher content of most of minerals, except magnesium, which was present in high concentrations in fruit. Fruit showed significantly higher antioxidant activity than flowers, whereas the total phenolic content varied depending on the growing location / cultivar. The material obtained from selected cultivars growing in an orchard had higher antioxidant activity and polyphenol and anthocyanin content than the material obtained from wild plants. Fruit of the ‘Haschberg’ cultivar and flowers of the ‘Sampo’ cultivar had the best bioactive properties of the studied samples.

This paper contextualises the common queries of "why is crypto crashing?" and "why is crypto down?", the research transcends beyond the frequent market fluctuations to unravel how cryptocurrencies fundamentally work and the step-by-step process on how to create a cryptocurrency. The study examines blockchain technologies and their pivotal role in the evolving Metaverse, shedding light on topics such as how to invest in cryptocurrency, the mechanics behind crypto mining, and strategies to effectively buy and trade cryptocurrencies. Through an interdisciplinary approach, the research transitions from the fundamental principles of fintech investment strategies to the overarching implications of blockchain within the Metaverse. Alongside exploring machine learning potentials in financial sectors and risk assessment methodologies, the study critically assesses whether developed or developing nations are poised to reap greater benefits from these technologies. Moreover, it probes into both enduring and dubious crypto projects, drawing a distinct line between genuine blockchain applications and Ponzi-like schemes. The conclusion resolutely affirms the continuing dominance of blockchain technologies, underlined by a profound exploration of their intrinsic value and a reflective commentary by the author on the potential risks confronting individual investors.

The study on the sustainable utilization capacity of water resources is of great significance for the realization of sustainable water resources management and development in the water-scarce regions of Northwest China. It provides insights into the potential for sustainable utilization of these resources. To evaluate the sustainable utilization capacity of the Huangshui Basin, a comprehensive evaluation index system was constructed based on three aspects: climate factors, water resources systems, and socio-economic factors. The evaluation was conducted using two methods: the fuzzy comprehensive evaluation model and the ELECTRE III evaluation method. The results indicate that the Huangshui Basin's water resources, as a whole, exhibit a medium sustainable utilization capacity. Climatic factors and socio-economic characteristics are the main factors affecting the sustainable utilization of water resources in the Huangshui Basin. Based on the results, measures such as strengthening the introduction of external water resources, enhancing water resources management, and implementing comprehensive remediation efforts in the basin can improve the level of sustainable use of water resources. The research results can provide a reference for decision-making regarding the evaluation of sustainable utilization capacity of water resources in water-scarce areas and the optimization of water resources management in the Huangshui Basin.

This study examines the integration of Environmental, Social, and Governance (ESG) factors into global banking practices and their impact on financial stability, measured by the Bank to Capital Asset Ratio. Through a comprehensive literature review and data analysis, the paper highlights the dual role of banks as catalysts for ESG investment and risk managers. It discusses the challenges and opportunities in transitioning to ESG-aligned business models, emphasizing the importance of regulatory frameworks and risk management approaches. The findings suggest that ESG integration enhances bank stability and competitiveness, contributing to sustainable economic development. The paper concludes with policy implications and recommendations for further integration of ESG factors into banking governance.

This paper explores the critical role of the banking sector in facilitating the ecological transition through the integration of ESG (Environmental, Social, and Governance) factors. By analyzing the intersection of ESG considerations and access to credit globally, the study highlights how banks can catalyze sustainable investments while balancing financial risks. Using a systematic literature review and k-Means clustering analysis, we assess the global landscape of credit access, emphasizing the implications of ESG adoption on financial stability and economic growth. The findings suggest that while ESG integration presents challenges, it offers significant opportunities for banks to enhance their competitiveness and foster resilient financial systems. The paper concludes by proposing policy recommendations aimed at improving the incorporation of ESG factors within credit risk management and promoting sustainable finance.

The combination of different wood modification technologies to obtain improved performance is increasingly receiving attention in research. In this study, Scots Pine (Pinus sylvestris) sapwood was impregnated with furfuryl alcohol (FFA) in pure aqueous 20, 40 and 60% solution strength without adding any catalyst. In a second step, the FFA was polymerized while simultaneously performing thermal modification in a closed system at 130, 150 or 180 °C. After leaching and ageing tests, the 9 different combinations were tested for use class 4 applications according to CEN/TS 15083-2 (2005) decay lab test. It was noted that even the minimum intensity combination of 20% FFA at 130 °C resulted in maximum durability class (DC) 1 performance. On the contrary, DC 4 was assigned to thermally modified control samples, even at the maximum intensity of thermal modification. Similarly, for FFA modifications, previous research has suggested that an uptake of 35% solution strength is required to obtain an adequate durability performance for use class 4 applications. High levels of resistance against termites were also noted by corresponding termite lab tests. Moisture studies showed the combined treatments resulted in improved stability and reduced moisture uptakes. Thus, the results obtained by this study revealed synergistic performance effects which originate from the combined thermo-chemical modification approach and which were higher than simple accumulation of the individual performance of purely thermally or chemically modified wood. Thus, the presented findings have provided positive implications for industrial applications of thermo-chemical modification techniques and offers an array of new research opportunities.

To determine the influence of child abuse on academic performance from the perspective of teachers of a private school from Piura, 2024. Method: The present study is an applied, non-experimental design with a continuous qualitative approach. The technique used was the survey and as an instrument the questionnaire on knowledge of child abuse with 12 questions, with a population of 20 teachers. Results: For the statistical analysis was used through Microsoft Excel 2023 and IBM SPSS software, in addition the Shapiro Wilks statistical test was used, the results show that 85% of respondents, from their perspective, neglect has a high level of influence on academic performance, 65% of respondents, from their perspective, state that psychological maltreatment has a high level of influence on academic performance and 50% of respondents, from their perspective, determine that physical maltreatment has a high level on academic performance. Conclusions: The value of p=0.553 &gt; 0.05, therefore, it is concluded that according to the perspective of the teachers of a private school from Piura, there are no significant changes in the academic performance of students who suffer from child maltreatment.

Purpose: Glyphosate and glyphosate-based herbicides (GBH), extensively utilized as herbicides worldwide, have been associated with numerous health issues. Previous experimental studies have indicated their potential to disrupt selenium homeostasis by either interfering with uptake or increasing oxidative stress. However, there is a significant research gap concerning the connection between glyphosate exposure and selenium status in epidemiological studies, particularly within nationally representative samples. Methods: In this study, we examined data from the 2013-2018 National Health and Nutrition Examination Survey (NHANES), involving 3011 participants aged 3 and above. Our main objective was to examine the connection between urinary glyphosate levels, whole blood selenium, and selenium intake. Results: Our analysis did not uncover an association between urinary glyphosate and selenium intake. Nevertheless, we observed a negative correlation between urinary glyphosate levels and whole blood selenium, with a ß coefficient of -1.984, S.E. = 0.639, and P = 0.003 in the final model. We also reported a notable decrease in the average concentrations of whole blood selenium as glyphosate tertiles increased, with P-values for trend of 0.033. Furthermore, the association was particularly prominent among females, non-Hispanic whites, and individuals with lower selenium intake. Conclusions: In this thorough examination of NHANES data, our study uncovers a possible detrimental connection between glyphosate exposure and whole blood selenium levels. These findings underscore the importance of further investigation into the health consequences of glyphosate exposure and its potential influence on selenium status, thereby raising awareness of potential implications for public health.

Trichoderma has been widely studied for its potential as a biocontrol agent against plant pathogenic organisms. Trichoderma's biological control mechanisms include competition, modification of environmental conditions, antibiosis, induction of plant defensive mechanisms, and mycoparasitism. Trichoderma species are known to produce a variety of secondary metabolites that have antifungal activity. These metabolites include peptaibols, gliotoxin, and trichokonins. Trichoderma also produces chitinases and β-1,3-glucanases that can degrade the cell walls of fungal pathogens. In addition to direct antagonism against fungal pathogens, Trichoderma can also induce systemic or localised resistance in plants, which is achieved through the production of elicitors such as chitin oligosaccharides and β-glucans that activate plant defence responses. Trichoderma can also form mutualistic associations with plants. In these associations, Trichoderma colonises the roots of plants and promotes plant growth by increasing nutrient uptake and inducing systemic resistance. Using Trichoderma as a biocontrol agent has several advantages over conventional crop protection techniques based on applying synthetic pesticides.

.Vitamin A (retinol) and its derivatives (retinoids) assume critical roles in neural development, cellular differentiation, axon elongation, programmed cell apoptosis and various fundamental cellular processes. Retinoids function by binding to specific nuclear receptors, such as retinoic acid receptors (RARs) and retinoid X receptors (RXRs), activating specific signaling pathways in the cells. Disruption of the retinoic acid signaling pathway can result in neuroinflammation, ox-idative stress, mitochondrial dysfunction and neurodegenerative processes, and has been asso-ciated with a range of neurodegenerative diseases. The present study explores the potential therapeutic application of our innovative synthetic retinoid, Ellorarxine, also known as DC645 and NVG0645, for the treatment of neurodegenerative disorders in vitro. MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) tetrazolium assay, lactate dehy-drogenase (LDH) assay, enzyme-linked immunosorbent assay (ELISA), senescence-associated (SA) β-galactosidase (β-gal) staining and immunofluorescence staining were performed. The re-sults showed that no cytotoxicity was detected at the experimental concentrations of Ellorarxine. Ellorarxine significantly reduced cell death, increased mitochondrial viability, reduced the num-ber of senescent cells, modulated cytokine release and regulated cellular autophagy. Furthermore, Ellorarxine also increased Cyp26 and selectively RARβ expression. These results make Ellorarxine a promising drug candidate that should be further investigated in the treatment of neurodegenerative diseases. .

Previous work has shown that perturbation analysis in algorithmic information dynamics can uncover generative causal processes of finite objects and quantify each of its element's information contribution to computably constructing the objects. One of the challenges for defining emergence is that the dependency on the observer's previous knowledge may cause a phenomenon to present itself as emergent for one observer at the same time that reducible for another observer. Thus, in order to quantify emergence of algorithmic information in computable generative processes, perturbation analyses may inherit such a problem of the dependency on the observer's previous formal knowledge. In this sense, by formalizing the act of observing as mutual perturbations, the emergence of algorithmic information becomes invariant, minimal, and robust to information costs and distortions, while it indeed depends on the observer. Then, we demonstrate that the unbounded increase of emergent algorithmic information implies asymptotically observer-independent emergence, which eventually overcomes any formal theory that any observer might devise. In addition, we discuss weak and strong emergence and analyze the concepts of observer-dependent emergence and asymptotically observer-independent emergence found in previous definitions and models in the literature of deterministic dynamical and computable systems.

It was aimed evaluate the nutritive value of three foods (Cecropia sp., Pterodon sp., and Inga sp.), for sloths (Bradypus variegatus), based on in vitro gas production. After a 14-day adaptation period to these foods, approximately 500g of gastric contents were collected from three female sloths, processed, and incubated with food samples to evaluate digestibility and in vitro degradation kinetics. The neutral detergent fiber (NDFcp) was greater (P&lt;0,05) in the leaves of Cecropia sp. The non-fibrous carbohydrate contents were greater in Pterodon sp. The greatest cellulose content was found in the leaves of C. pachystachya, as well as lowest value for hemicellulose. There were differences in the in vitro digestibility of crude protein (P&lt;0.05), higher for Inga sp. In terms of kinetic parameters, Pterodon sp. demonstrated higher production of total gases (Vt) and digestion rates of fibrous carbohydrates (kdNFC) (P&lt;0.05), possibly related to the lower NDF content and higher values of soluble carbohydrates, which favored fermentative processes. The leaves of Pterodon sp. and Inga sp. demonstrated potential for feeding B. variegatus. Feeding B. variegatus with Cecropia sp., due to the NDF content, can cause negative effects on dry matter consumption.

The main objective of this study was to study the effect of occupational stress on turnover intentions, as well as whether this relationship is mediated by burnout levels and moderated by motivation. The sample of this study consisted of 603 participants, all employees of the Portuguese Tax and Customs Authority, which is part of the Ministry of Finance and belongs to the Direct State Administration. The results indicate that occupational stress (with managers, with career and remuneration and with work overload) has a positive and significant effect on turnover intentions and that this relationship is mediated by burnout. Motivation (intrinsic and identified) has a negative and significant effect on turnover intentions. Intrinsic motivation moderates the rela-tionship between occupational stress (with managers, with colleagues, with career and pay and with family problems) and turnover intentions. These results indicate that among the dimensions of occupational stress, the most critical are stress with managers, work overload and career and pay. These are factors that the Direct State Administration should be concerned about in trying to minimize their causes.

This paper gives both a general canonical quantum gravity theory and the general canonical quantum gravity theories of the Universe and general black hole, and discovers the relations reflecting symmetric properties of the standard nonlinear gravitational Lagrangian, which are not relevant to any concrete metric models. This paper concretely shows the general commutation relations of the general gravitational field operators and their zeroth, first, second and third style, respectively, of high order canonical momentum operators for the general nonlinear system of the standard gravitational Lagrangian, and then has finished all the four styles of the canonical quantization of the standard gravity.

The sustainability of grazing lands lies in the nexus of human consumption behavior, livestock productivity, and environmental sustainability. Due to fast growing global food demands, many grazing lands have suffered from overgrazing, leading to soil degradation, air and water pollution, and biodiversity losses. Multidisciplinary efforts are required to understand how grazing lands can be better monitored, assessed and managed to attain predictable outcomes of optimal benefit to society. This paper synthesizes our understanding based on previous work done on impacts of grazing on ecosystem goods and services, identifies current knowledge gaps, and formulates a plan forward. We review the impacts of two contrasting grazing systems, continuous and multi-paddock rotational grazing, on soil carbon (C), nutrient cycling and greenhouse gas emissions (GHGs). We then extend our review to explore challenges of incorporating spatial heterogeneity and temporal variability into monitoring and modelling C and nutrient cycling in grazing lands. We revisit two process-based models (i.e., DNDC and DayCent) and two watershed models (i.e., SWAT and VIC) widely used to simulate C, nutrient and water cycles of these lands. Finally we identify research directions for improving the knowledge base which is essential to conserve grazing lands and maintain their ecosystem goods and services.

Dryland winter wheat in Loess Plateau is facing yield reduction due to shortage of soil moisture and delayed sowing time. Field experiment was conducted at Loess Plateau in Shanxi Province, China from 2012 to 2014, to study the effect of subsoiling and conventional tillage and different sowing dates on the soil water storage and contribution of N accumulation and remobilization to yield of winter wheat. The results showed that subsoiling significantly improved the soil water storage at 0-300 cm depth, improved the number of tillers and pre-anthesis N translocation in various organs of wheat and post-anthesis N accumulation, eventually increased the yield up to 17-36%. Delaying sowing time had reduced the soil water storage at sowing and winter accumulated temperature by about 180˚C. The contribution of N translocation to grain yield was maximum in glume+spike followed by in leaves and minimum by stem+sheath. In addition a close relationship was found between the N accumulation and translocation and the soil moisture in the 20-300 cm. Subsoiling during the fallow period and the medium sowing date was beneficial for improving the soil water storage and increased the N translocation to grain, thereby increasing the yield of wheat, especially in dry year.

Porcine reproductive and respiratory syndrome virus (PRRSV) infections cause significant economic losses to swine producers every year. Aerosols containing infectious PRRSV are an important route of transmission, and proper treatment of air could mitigate the airborne spread of the virus within and between barns. Previous bioaerosol studies focused on the microbiology of PRRSV aerosols; thus, the current study addressed the engineering aspects of virus aerosolization and collection. Specific objectives were to (1) build and test a virus aerosolization system, (2) achieve a uniform and repeatable aerosol generation and collection throughout all replicates, (3) identify and minimize sources of variation, (4) verify that the collection system (impingers) performed similarly. The system for virus aerosolization was built and tested (Obj. 1). The uniform airflow distribution was confirmed using a physical tracer (<12% relative standard deviation) for all treatments and sound engineering control of flow rates (Obj. 2). Theoretical uncertainty analyses and mass balance calculations showed <3% loss of air mass flow rate between the inlet and outlet (Obj. 3). A comparison of TCID₅₀ values among impinger fluids showed no statistical difference between any two of the three trials (p-value = 0.148, 0.357, 0.846) (Obj. 4). These results showed that the readiness of the system for research on virus aerosolization and treatment (e.g., by ultraviolet light), as well as its potential use for research on other types of airborne pathogens and their mitigation on a laboratory scale.

Litchi (Litchi chinensis Sonn.) is considered as one of the most important sub-tropical fruits of the World. Under western part of Odisha, India, the litchi growers are facing problem of unstable and lower marketable yield and inferior quality due to higher incidence of fruit cracking, fruit drop, low sugar content and higher fruit acidity. Keeping in mind the positive effects of nutrients and bioregulators, the current study was conducted to elucidate their impact on fruit yield, and quality in the farmers field of Jamankira block in Sambalpur district of Odisha under Odisha University of Agriculture and Technology, India. For the studies, eight years old litchi trees were selected. With 12 treatments, the experiment was set up in a randomized block design replicated thrice viz, T₁: Spray treatment of Borax @ 0.5%; T₂: Spray treatment of Borax @ 0.3%; T₃: Spray treatment of ZnSO₄ @ 0.75% ; T₄: Spray treatment of ZnSO₄ @ 0.5%; T₅: Spray treatment of CaCl₂ @ 0.5%; T₆: Spray treatment of CaCl₂ @ 0.1%; T₇: Spray treatment of Humic acid @ 1.5%; T₈: Spray treatment of Humic acid @ 1%; T₉: Spray treatment of Seaweed extract @ 0.5%; T₁₀: Spray treatment of Seaweed extract @ 0.1 %; T₁₁: Foliar spray of NAA @ 20 ppm and T₁₂ : Control (water spray).The current study compared foliar feeding of different nutrient and bioregulators treatments, which were applied during the first week of December, just after completion of new leaf formation and untreated control. The total number of fruits per plant was recorded highest in plants sprayed with ZnSO4 @ 0.5% (T₄) followed by those treated with humic acid @ 1% (T₈). The highest total fruit yield was recorded in plants with foliar feeding of 0.3% Borax (T₂) which was found to be statistically similar to plants treated with seaweed extract @ 0.1% (T₁₀)and seaweed extract @ 0.5% (T₉).Among the treatments better response for higher number of marketable fruits and marketable yield was recorded in plants treated with both 0.3% Borax (T₂) followed by 0.5% Zinc sulphate (T₄), 1% Humic acid (T₈) and 0.1% CaCl₂ (T₆) in litchi. Application of 1% Humic acid (T₈) followed by 1.5% Humic acid (T₉) enhanced the fruit set (%) and fruit retention (%) along with reduction in fruit drop (%). The enhanced fruit size (fruit length and fruit breadth) and higher fruit weight was obtained in plants treated with 0.3% Borax in litchi. The foliar application of 0.3% Borax (T₂) had also resulted in higher TSS, total sugars, reducing sugar, lower acidity, highest aril weight and lower seed weight in litchi cv. Bombai.

Background: Caring for individuals with mental disorders poses significant challenges for caregivers, often leading to compromised quality of life and mental health issues such as stress, anxiety, and depression. This study aims to assess the extent of these challenges among caregivers in Greece, identifying which demographic factors influence their well-being. Method: A total of 157 caregivers were surveyed using the SF-12 Health Survey for quality of life assessment and the DASS-21 questionnaire for evaluating stress, anxiety, and depression symptoms. T-tests, Kruskal-Wallis tests, Pearson correlation coefficients, and regression analyses were applied to understand the associations between demographics, quality of life, and mental health outcomes. Results: The study found that caregivers, especially women and younger individuals, faced high levels of mental health challenges. Marital status, educational level, and employment status also significantly influenced caregivers' well-being. Depression was the most significant factor negatively correlating with the mental component of quality of life. The magnitude of burden experienced by caregivers highlighted the urgency for targeted social and financial support, as well as strategic treatment programs that consider caregiver well-being. Conclusions: Caregivers of individuals with mental disorders endure significant stress, anxiety, and depression, influencing their quality of life. Demographic factors such as age, gender, marital status, education, and employment status have notable impacts. Findings emphasize the need for society-wide recognition of caregivers' roles and the creation of comprehensive support and intervention programs to alleviate their burden, particularly in the context of the COVID-19 pandemic.

Cardiovascular and cerebrovascular disease incidence has risen mainly due to poor control of preventable risk factors and still constitutes a significant financial and health burden worldwide. ChatGPT is an artificial intelligence language-based model developed by OpenAI. Due to the model’s unique cognitive capabilities beyond data processing and the production of high-quality text, there has been a surge of research interest concerning its role in the scientific community and contemporary clinical practice. To fully exploit ChatGPT's potential benefits and reduce its possi-ble misuse, extreme caution must be taken to ensure its implications ethically and equitably. In this article, we explore the language model's possible applications and limitations while empha-sizing its potential value for diagnosing, managing, and prognosis cardiovascular and cerebro-vascular disease.

Quality of life (QOL) is based on their perception of their position in life in respect to their goals, expectations, standards, and concerns, as well as their culture and value systems, their workflow and workplace situations while it influences quality of services. In this study we aim to report on dental and nursing academians’ QOL and well-being at the end of the third year of the COVID-19 pandemic. The World Health Organization Quality of Life-BREF Scale (WHOQOL-BREF) tool, recording Physical, Psychological, Social and Environmental dimensions of QOL, was used. The WHOQOL-BREF was modified on a spiritual, coaching/mentoring approach in a two-step designing and validated procedure. The modified SHQOL-BREF (Spiritual Healthcare version) designed for this study, was uploaded, and filled in online during April-June 2023. Staff (N=120, 75% female) of both departments of Dentistry (44.2%) and Nursing (55.8%) of the National and Kapodistrian university of Athens, participated in anonymity. QOL in terms of physical health was reported at a higher level (M=72.2 points) compared to social relationships (M=69 points), psychological health (M=65 points) and environment (M=59 points) (scores reported in 0-100 score). Overall QOL was rated at 66 points while satisfaction from health at 72 points. Job satisfaction (M1=3.2) and spirituality (M2=3.0) were reported at a medium level in a 5-point scale, while personal beliefs and values were reported at a high level (M3=4.0). Participants age presented a significant, moderate to strong effect on physical health [F(3,97)=2.89, p&lt;.05, η2p=.08] and on environment [F(3,97)=2.80, p&lt;.05, η2p=.08] and marital status on social relationships [F(1,97)=9.66, p&lt;.05, η2p=.09]. Married participants reported consistently higher levels of QOL compared to single participants, for all age groups. Department had a significant moderate effect on social relationships (F(1,97)=5.10, p&lt;.05, η2p=.05) and education a significant moderate to strong effect on psychological health (F(2,97)=3.74, p&lt;.05, η2p=.07). PhD level participants in both departments presented higher levels of psychological health compared to lower educational levels. Also, participants from the department of Dentistry reported higher levels of social relationships QOL in all educational groups, compared to the department of Nursing. Strategic planning on sustainability and QOL initiatives should be introduced after the COVID-19 pandemic for dental and nursing academic personnel to promote resilience and QOL scores.

This article presents a harmonic analysis of the stator currents of a squirrel-cage in-15 duction motor fed by a voltage source inverter with PWM space vector control (SV-PWM). The 16 influence of PWM switching frequency and dead time (dead-band) of controlled transistors on 17 THD and electromagnetic torque ripple is shown. The aim is to determine the lowest switching 18 frequency of the transistors for which the drive will operate correctly. Characteristics were de-19 termined as functions in the form of THD ( ), where the least square approximation was 20 used for stator current measurements when the PWM switching frequency is changed. The ap-21 proximations were realized for simulation and experimental results. To clarify the results, the 22 operation of hardware PWM circuits in microcontrollers was analyzed.

Abstract: The aim of this study was to identify and quantify polyphenolic compounds in skin extracts from four Bulgarian grape varieties and compare to those of seed extracts. The values of total phenolic contents (TPC), flavonoids, anthocyanins, procyanidins, ascorbic acid in grape skin extracts were determined. The antioxidant capacities of skin extracts were evaluated by DPPH, ABTS, FRAP and CUPRAC methods. The TPC values of skin extracts were 2-3 times lower than those of seed extracts. The significant difference between total parameters values of individual grape varieties were also found. According to the TPC and antioxidant capacity of skin extracts the different grape varieties were in the following order: Marselan ≥ Pinot Noir ˃ Cabernet Sauvignon ˃ Tamyanka. The individual compounds in the grape skin extracts were determined by RP-HPLC and compared with those of seed extracts. The determined composition of skin extracts was significant different from seed extracts composition. Qualitative and quantitative evaluation of the procyanidins and catechins in the skins were carried out. A correlation between phenolic contents, individual composition and antioxidant capacity of different extracts was found. The studied grape extracts have a potential to be applied as natural antioxidants in the pharmaceutical and food industries.

China promotes nature-based solutions (NbS) as key approaches to addressing climate change, ecosystem damage, and biodiversity loss. However, indigenous and local knowledge (ILK), which is recognized by international scholars as an essential element of successful NbS, has not been thoroughly studied in the Chinese context. By conducting a comprehensive review of Chinese central governmental policies and semi-structured interviews with typical cases, this study finds out diversified sources of ILK and five pathways of ILK integration, including education, supervision, participation, knowledge preservation, and knowledge adoption. An increasing emphasis on community engagement has been driven by central policies such as the ecological civilization, carbon peaking and carbon neutrality goals. From a practical perspective, consistent core ideas of ILK exist in selected typical Chinese cases and studies in other countries, namely co-existence and reciprocity with nature. While supportive central policies can set the scene, ILK integration could not be realized without local governmental endorsement, context-based implementation, and long-term multi-stakeholder participation. Furthermore, this study also figures out a potential deficiency in terms of realizing effective ILK integration in mainstream and conventional practices, which can be further investigated by future studies.

Erosion caused by the repeated impact of particles on a substance surface is a usual wear method resulting in gradual and continual loss of objects. It is a crucial problem in several modern industries because their surfaces are frequently subjected to destructive erosive situations. Polymers and their hybrid materials include several applications to be used as a coating in the form of powder for different applications. This review paper aims to provide extensive information on the erosion behavior of thermoset and thermoplastic neat resin and their hybrid materials composites. Focus is specifically paid to highlight the influence of properties of selected materials, impingnation parameters such as incident Angle of erodent, impact velocity of erodent, erodent nature, and the erosion mechanism. The review further extends the information about the erosion techniques and numerical simulation methods used for wear studies of surfaces. An investigation has been carried out for researchers to explore the selection of materials and methods in terms of conditions and parameters to meet the current and future needs and challenges for the protection of surfaces of the advanced industries. During review according to the findings achieved from the literature of the past fifty years, it has been noted that the thermoplastic nature of the composite is a key component to determine the anti-wear properties, the composites with lower glass transition, higher ductility, and greater crystallinity can provide better protection to erosion in advance surface applications.

In 1922, Albert Einstein visited Paris and interacted extensively with an illustrious section of the French academia. In overfilled sessions at the Coll\`{e}ge de France and the Sorbonne, Einstein explained his theories of relativity, and prominent physicists, mathematicians and philosophers listened, debated, questioned and explored facets of relativity. The 1922 visit had its echoes in the life and works of many who participated, particularly decisive for Einstein and the philosopher Henri Bergson. This essay examines that eventful visit, focusing on the physical and logical aspects of Bergson's critique, with physics commentaries, linking prominent French physicists and mathematicians Langevin, Painlev\'{e}, Hadamard, Becquerel, Sagnac, and Kastler. I give particular attention to the logical and empirical accuracy of the physics issues involved, delineating Bergson's exact reasoning for his philosophical enthusiasm in Einstein's theory and for the ensuing critique. Bergson's philosophical stand on duration and simultaneity is reassessed in the context of later developments in cosmological physics as well as the wealth of empirical data involving comparison of atomic clocks. Finally we are led naturally to a surprising completion of the philosopher's program on universal time, duration and simultaneity, in harmony with the time of the physicist. In the appendices after the main text I also give the physics background and easily verifiable proofs for the assertions made in the text, pertaining to relativity, simultaneity and time dilation, clearly distinguishing beliefs and facts.

To build a representation of what we see, the human brain recruits regions throughout the visual cortex in cascading sequence. Recently, an approach was proposed to evaluate the dynamics of visual perception in high spatiotemporal resolution at the scale of the whole brain. This method combined functional magnetic resonance imaging (fMRI) data with magnetoencephalography (MEG) data using representational similarity analysis and revealed a hierarchical progression from primary visual cortex through the dorsal and ventral streams. To assess the replicability of this method, here we present results of a visual recognition neuro-imaging fusion experiment, and compare them within and across experimental settings. We evaluated the reliability of this method by assessing the consistency of the results under similar test conditions, showing high agreement within participants. We then generalized these results to a separate group of individuals and visual input by comparing them to the fMRI-MEG fusion data of Cichy et al. (2016), revealing a highly similar temporal progression recruiting both the dorsal and ventral streams. Together these results are a testament to the reproducibility of the fMRI-MEG fusion approach and allows for the interpretation of these spatiotemporal dynamic in a broader context.

The manufacturing method influences the properties of the produced components. This work investigates the influence of manufacturing methods such as fused filament fabrication (3D printing) and injection molding on water absorption, mechanical and thermal properties of the specimens produced from neat biobased poly(lactic acid) (PLA) polymer and poly(lactic acid)/wood composites. Acrylonitrile butadiene styrene (ABS) acts as the reference material due to its low water absorption and good functional properties. The printing layer thickness is one of the factors that affects the properties of a 3D printed specimen. The investigation includes two different layer thicknesses (0.2 mm and 0.3 mm) while maintaining uniform overall thickness of the specimens across two manufacturing methods. 3D printed specimens absorb significantly higher amounts of water than the injection molded specimens, and the increase in the layer thickness of the 3D printed specimens contributes to further increased water absorption. However, the swelling due to water absorption in 3D printed specimens decreases on increased layer thickness. Tensile, flexural and impact properties of all the specimens decrease after water absorption while the properties improve on decreasing the layer thickness. Higher porosity on increasing the layer thickness is the predominant factor. The results from dynamic mechanical analysis and microscopy validate the outcomes.

Background: Spinal schwannomas and meningiomas are the most common spinal cord benign tumors in adults and total excision is the goal of the treatment. The traditional surgical approach is performed by total laminectomy, but recently unilateral hemilaminectomy has been recognized as a valuable surgical alternative. We report the clinical results of patients affected by spinal schwannoma and meningioma in whom total laminectomy or unilateral hemilaminectomy were performed. Material and Methods: A retrospective study of patients who underwent resection of spinal meningioma or schwannoma by laminectomy or unilateral hemilaminectomy approaches in our Institute from January 2013 to January 2023 was made. The baseline data of these patients, operative approach and postoperative outcome were compared. Results: The study was performed on 41 patients with mean age of 62.5 ±14.6 years. Our series included 24 (59%) cases of schwannomas and 17 (41%) cases of meningiomas, with a prevalent location in the thoracic spine. The average schwannomas volume was 3,6 ±2,7 cm3, whereas the average meningiomas volume was 1.1 ±0.5 cm3. Total excision was achieved in all cases. Operative time of schwannomas was longer (p=0.001) respect to meningiomas with higher intra-operative blood loss (p=0.000). Total laminectomy approach was performed in 24 out of 41 patients (59%) and unilateral hemilaminectomy approach in 17 out of 41 (41%) patients. Unilateral hemilaminectomy was associated with shorter postoperative bed rest (p=0.003), shorter hospitalization (p=0.028) and lower postoperative pain (p=0.02) respect to total laminectomy. Conclusions: Both spinal schwannomas and spinal meningiomas in various size can be safely and effectively treated with unilateral hemilaminectomy approach. This approach grants more advantages compared with standard total laminectomy, including shorter postoperative bed rest, shorter hospitalization and reduced postoperative pain.

After the ban on tributyltin-based antifouling paints, DCOIT (4,5-Dichloro-2-octylisothiazol-3(2H)-one) became one of the most used antifouling biocides. DCOIT is a pseudo-persistent contaminant in port areas and is toxic to non-target species, but its ability to bioaccumulate and be transferred along the trophic chain remains unknown. This study aimed to preliminarily investigate the bioaccumulation, trophic transfer, and biomagnification of DCOIT and SiNC-DCOIT (DCOIT immobilized in silica mesoporous nanocapsules) from the microalga Tetraselmis chuii to the mussel Mytilus galloprovincialis during exposure experiments considering 24 h of uptake followed by 72 h depuration. Mussels rapidly internalized and metabolized both DCOIT and SiNC-DCOIT. The predator-prey biomagnification factors (BMFTL) suggested that both forms of the biocide can be trophically transferred, with higher concentrations of DCOIT and SiNC-DCOIT in mussels than in microalgae (BMFTL &gt; 1). However, the bioaccumulation and bioconcentration factors indicated a low bioaccumulation capability in the short term, suggesting that the depuration rate overcomes the uptake. Our findings contribute to the development of environmental risk assessments for DCOIT and SiNC-DCOIT, but do not exclude the possibility of DCOIT bioaccumulation in the long-term in areas with constant input of DCOIT. Further studies are needed to understand these processes under continuous exposure scenarios to DCOIT.

(1) Background: The aim of study was to investigate the salt consumption by children and adolescents from the Silesian Province (Poland), taking into account the region’s dietary traditions and number of years of school education. (2) Methods : 300 students aged 10–18 from different types of schools, were enrolled in the study and divided into groups in terms of: school, sex, the state of nutrition. The survey questionnaire about dietary habits, including the frequency and serving size with respect to 12 salty products was used. On the basis of the frequency and the amount of consumed products, as well as the data on salt content, the amount of total daily intake of salt was estimated.; (3) Results: The mean daily intake of salt by children and adolescents was 1.083 g ( 0.433 g of sodium); children aged 10–12 consumed the highest amount of salt (1.296 g/day) compared to pupils aged 13–15 (1.131 g of sodium) and adolescents aged 16–18 (0.863 g/day); (4) Conclusions: With age, as a result of various factors, the consumption of salt declines. The parents impact and the familial socio-environmental factors begin to wane, and other factors start to have influence, e.g. school education of healthy lifestyle, health behavior of peers.

Portugal’s EPAC silo network, initially planned in the 1930s but constructed and utilized primarily in the 1970s, consisted of 31 silos with a total capacity of 841,100 t. The network’s usage declined, however, due to market liberalization and Portugal’s accession to the European Economic Community in 1985. This study focuses on adapting a methodology to inventory and analyse the 31 silos in the EPAC network considering their general features, construction, technological facilities, and socioeconomic aspects. The silos are situated in 30 cities and towns, predominantly in the country’s key grain-growing regions, particularly the Alentejo region. While there are variations in design and construction, most EPAC silos contain two or three rows of circular reinforced-concrete cells and use the spaces between cells for storage. Their capacities range from 6,000 to 35,000 t. Some are inland grain reception and storage silos, while others are larger-capacity port silos designed to unload grain rapidly onto ships using mechanical or pneumatic unloaders. These structures are a significant part of Portugal’s agro-industrial heritage and have in some cases been repurposed as museums or event venues. Compared to other agro-industrial buildings, silos pose unique conversion challenges due to their height and design complexities. Examples of successful reuse in countries like Spain and Italy may provide insights for potential silo projects in Portugal. However, analysis suggests that such proposals and similar initiatives may be viable only in the more highly populated towns.

In this study, alfalfa silage with different packing densities (500 kg/m3, 600 kg/m3 and 700 kg/m3) were set up under outdoor high temperature and indoor normal temperature. The chemical composition, fermentation quality and microbial community of alfalfa silage were analyzed. The results showed that DM and WAC content decreased with the increase of density. When the density is 600kg/m3, CP content reaches the maximum and ADF content is the lowest. Temperature has a certain effect on alfalfa silage. The content of Lactobacillus plantarum fermented at high temperature is lower than that fermented at normal temperature. At the same time, the content of Lactobacillus plantarum decreased with the increase of packing density. However, the content of Lactobacillus plantarum was the lowest when the packing density was 600 kg/m3 at high temperature. In summary, this study explained the effects of different temperature and density on alfalfa fermentation quality and microbial community, and clarified that the density should be reasonably controlled within 600 kg/m3 during alfalfa silage, providing theoretical support for production practice.

Arginine shows Jekyll and Hyde behavior in several respects. It participates in protein folding via ionic and H-bonds and cation-pi interactions; the charge and hydrophobicity of its side chain makes it a disorder-promoting amino acid. Its methylation in histones; RNA binding proteins; chaperones regulates several cellular processes. The arginine-centric modifications are important in oncogenesis and as biomarkers in several cardiovascular diseases. The cross-links involving arginine in collagen and cornea are involved in pathogenesis of tissues but have also been useful in tissue engineering and wound-dressing materials. Arginine is a part of active site of several enzymes such as GTPases, peroxidases, and sulfotransferases. Its metabolic importance is obvious as it is involved in production of urea, NO, ornithine and citrulline. It can form unusual functional structures such as molecular tweezers in vitro and sprockets which engage DNA chains as part of histones in vivo. It has been used in design of cell-penetrating peptides as drugs. Arginine has been used as an excipient in both solid and injectable drug formulations; its role in suppressing opalescence due to liquid-liquid phase separation is particularly very promising. It has been known as a suppressor of protein aggregation during protein refolding. It has proved its usefulness in protein bioseparation processes like ion-exchange, hydrophobic and affinity chromatographies. Arginine is an amino acid, whose importance in biological sciences and biotechnology continues to grow in diverse ways.

Background: Informal caregivers' own quality of life, health status, and determinants are poorly understood despite their concerns for the health of the individuals they assist. Objectives: To compare the quality of life and the health determinants of older informal caregivers with those of older adults without caregiving responsibilities. Methods: An online survey was designed to investigate the quality of life and the health determinants of people aged 65 years and over, with a focus on informal caregivers. In addition to socio-demographic data, the number of informal caregiver and the Zarit scale of caregiver burden were collected. Quality of life (SF-12) and health determinants (access to technology and level of physical activity (IPAQ)) were assessed and compared between informal caregivers and the others. Results: A total of 111 participants (70 ± 3.83 years, 71.2% of women). The majority of respondents (91.8%) were Belgian. One third of the respondents identified themselves as informal caregiver and declared to have severe burden (61.9±15.2/88). Socio-demographic characteristics and access to technology were similar between informal caregivers and non-caregivers (p>0.05). However, informal caregivers have a lower SF-12 score in the mental score domain (44.3±10.2 vs; 50.7±7.0; p=0.004) and a lower level of physical activity (434±312 METS/min/week vs.1126±815 METS/min/week; p=0.01) than their peers. Conclusions: Informal caregivers reported lower quality of life and lower level of physical activity than their peers. Given the recognized importance of physical activity for overall health, this survey highlights the need to promote physical activity among older informal caregivers.

A full potential all-electron density functional method within generalized gradient approximation is used to investigate the electronic, elastic and transport properties of cubic copper sulphide and copper selenide. The electronic structure suggests metallic behavior with a zero energy band gap for both materials. Elastic property calculations suggest a stiff material with the bulk to shear modulus ratio of 0.35 and 0.44 for Cu2S and Cu2Se respectively. The transport properties were estimated using the Boltzmann transport approach. Seebeck coefficient, electrical conductivity, thermal conductivity, and power factor all suggest a potential p-type conductivity for Cu2S and n-type conductivity for Cu2Se.

Regulation at the level of translation plays an essential role in modulating gene expression. Given the importance of knowledge about translationally active mRNAs as an indicator of translation efficiency, it is crucial for researchers to have at their disposal organised sources of functional information on translation - plant translatomic maps similar to transcription maps. The development of a general experimental and computational methodology for constructing translatome maps is essential to address this challenge. In this manuscript, we discuss what researchers can do to design plant translatome maps, namely, we review: (i) experimental methods to obtain translationally active mRNA fractions, considering their advantages and limitations; (ii) additional methodological approaches to obtain complete pools of translationally active mRNAs; (iii) sequencing methods to qualitatively and quantitatively assess different mRNA fractions; and (iv) multivariate analyses of sequencing results by bioinformatics methods, including metrics for assessing mRNA translational activity.

The contribution of genetic and environmental factors to the pathophysiology of cerebral aneurysms in monozygotic twins is under-reported and presents ambiguous arguments. The morphology and hemodynamics of neurovascular arteries in a pair of monozygotic twins (MTs) were investigated to reveal the underlying mechanisms. Four arterial models were reconstructed for the twin A-right brain and left brain, twin B-left brain, and B-left brain without anterior cerebral arteries based on preclinical scanned information. Subsequently, the dimensions, configurations and outlined curves of the three-perspective geometries were compared between the MTs. Adopting an in-vitro validated numerical cerebral aneurysm model, hemodynamic patterns were investigated and compared in the MT models, respectively. Morphological comparisons of the MTs show the size and shape of cerebral arteries exist significant differences, despite of the expected genetic similarities. These differences can be attributed to variations during embryological development and external environmental influences. Qualitatively and generally, numerical results indicate the MTs have some hemodynamic similarities (e.g., time-averaged pressure (TAP) distributions (~13400 Pa), and oscillatory shear index (0~0.49), but present significant differences in specific local arteries due to morphological variances. Specifically, the difference in the volumetric blood flow rate in corresponding arteries between the MTs is from 16% (smallest) in anterior choroidal artery (AChA) to 221% (largest) in the ophthalmic artery (OphA), varying with specific compared arteries. Also, the registered hemodynamic indicators, such as the maximum time-averaged wall shear stress (TWSS) (53.6 Pa vs. 37.8 Pa), and different local OSI distributions were observed between the MTs. The findings revealed that morphological variations in MTs could be generated by embryological and environmental factors, thus assuming they share the identical morphology in cardiovascular and neurovascular systems may lead to significant misevaluations in hemodynamics quantifications and further lesions.

(1)Background: Early-age concrete shrinkage induces stress that impact the cost and service life of concrete pavements. (2)Methods: In this study, strain measurements of field slabs were conducted and a methodology was presented that independently derived autogenous, drying, and thermal shrinkages in the initial stages of concrete placement. Total strain was measured according to five different environmental conditions and shrinkage strain was calculated for each condition. (3)Results: By measuring the strain of the slab and the specimen, the drying shrinkage strain was measured to be approximately 54% better than that by the conventional non-stressed cylinder method because it was possible to measure the drying shrinkage strain at the surface rather than in the middle part of the slab along its depth direction. When the water-to-cement ratio increased (35→40%), there was a considerable reduction (317με→82με) of autogenous shrinkage strain for the concrete at 28 days of age. Furthermore, calculation of stress-dependent strain allowed the presentation of more intuitive and accurate results. (4)Conclusion: As the measurement of independent shrinkage occurrence is possible, the consequent calculated result of the stress-dependent strain acting on real slabs will facilitate improvement in the construction quality, reduction in the development of defects in the concrete structure, and increase in the service life.

With the increased use of laterite nickel ore, the impact of high Al2O3 slag on blast furnace smelting has gradually increased. In this paper, the effects of slag basicity and Al2O3 content on slag viscosity and enthalpy change under constant temperature conditions was investigated. The changes in slag structure were analyzed by activation energy and Fourier Transform Infrared (FT-IR) spectroscopy. The relationship between slag components and slag temperature and viscosity when slag heat is reduced was investigated. The results showed that the viscosity first slightly decreased and then significantly increased with increasing basicity at constant temperature. With the addition of Al2O3 content, the viscosity of the slag increases. The activation energy increases with increasing slag basicity and Al2O3. With increasing basicity, the [SiO4]4- tetrahedral unit trough depth becomes shallow, the [AlO4]5- asymmetric stretching band migrates to lower wave numbers, and the slag structure depolymerizes. With the increase of Al2O3 content, the trough of [SiO4]4- tetrahedra deepens and the center of the symmetric stretching band moves to a higher wave number. The [AlO4]5- asymmetric stretching band becomes obvious, indicating the complexity of the slag structure. When the heat decreases, the slag temperature increases as the basicity increases, and the slag thermal stability is better at the basicity of 0.95-1.05. As the Al2O3 content increases, the thermal stability of the slag becomes worse.

There is a growing consensus that culture influences the perception of facial expressions of emotion. However, little is known about whether and how culture shapes the production of emotional facial expressions, and even less so about whether culture differentially shapes the production of posed versus spontaneous expressions. Drawing on prior work on cultural differences in emotional communication, we tested the prediction that people from the Netherlands (a historically heterogeneous culture where people are prone to low-context communication) produce facial expressions that are more distinct across emotions compared to people from China (a historically homogeneous culture where people are prone to high-context communication). Furthermore, we examined whether the degree of distinctiveness varies across posed and spontaneous expressions. Dutch and Chinese participants were instructed to either pose facial expressions of anger and disgust, or to share autobiographical events that elicited spontaneous expressions of anger or disgust. Using the complementary approaches of supervised machine learning and information-theoretic analysis of facial muscle movements, we show that posed and spontaneous facial expressions of anger and disgust were more distinct when produced by Dutch compared to Chinese participants. These findings shed new light on the role of culture in emotional communication by demonstrating, for the first time, effects on the distinctiveness of production of facial expressions.

The purpose of this study is to determine the equilibrium conditions for the formation of a mixture of propane and normal butane hydrates including temperature, pressure and mole fraction. In order to prevent the formation of hydrates in the cooling path, it is necessary to examine the conditions of hydrate formation and provide solutions. Modeling of hydrate formation conditions was performed using Hydoff software and compared with experimental results in this field, which obtained an acceptable error percentage. The range of temperature is between 267-276 °C and the molar percentage of propane is 0.7,0.8 and 0.9 and the mathematical equation was presented to predict hydrate formation. By analyzing the results, it was found that by increasing the concentration of ethane in the presence of other compounds, hydrate growth increased and hydrates formed more stable, also by increasing the concentration of propane and normal butane the amount of equilibrium pressure will decrease.

ASTM A743 CA6NM alloy is a martensitic stainless steel typically used in energy industry -runners and hydraulic turbine components- due to its superior toughness, yield and fatigue properties. In both the manufacturing, shielded metal arc welding is applied to join for this grade steels. However, weldability of the steels is limited due to formation of hard and brittle phases such as untempered martensite during welding and post weld heat treatment processes. The formation causes a reduction in toughness. In this study, influence of post-weld heat treatment procedure (single tempering and double tempering) and parameters on microstructure and hardness of AWS410NiMo all weld metal. Hardness tests were conducted from weld metal. Microstructures of the all weld metals subjected to different heat treatment process were characterized.

The aim of this study was to examine the post-injury psychological impact looking for to avoid sources of health issues. We have analyzed differences in the stress, anxiety and depression levels between male and female football players who have suffered at least one injury during the last season played respect to similar players who have not been injured. A descriptive cross-sectional design was used. The participants were 187 football players and data on the player’s injuries were collected. A Self-reported Questionnaire collected number, type and severity of injuries sustained during the previous sports season (twelve months), and also the player’s current situation being injured or not injured. To evaluate the psychological variables, the DASS-21 questionnaire was used. Results indicated that the male injured players presented anxiety levels higher than those who were non-injured. When we observe the female players’ data, the stress levels of the non-injured ones are higher than those of the injured players. Regarding the non-injured athletes, results showed that the female non-injured players presented values in anxiety higher than those corresponding to the non-injured male players. Thus, sport injury affects mental health issues such as anxiety and stress, and in a different way regarding gender.

Is it true that the nuclear technology applied to electric energy generation offers a clean, safe, reliable and affordable i.e. sustainable alternative? Yes it is, but its impact on the environment strongly depends on the implementation bearing residual risks due to a human factor, technical failures or natural catastrophes. A full response is therefore difficult and can first be given when the wicked multi-disciplinary problems get well formulated and “solved”. These problems have multi-dimensional nature lying at the interface between: necessary R&D effort, the industrial deployment and the technology impact in view of the environmental sustainability including the management of produced hazardous waste. This enormous complexity indicates that just a description of the problem might represent a problem. The paper proposes a holistic approach to assess the nuclear energy systems potential with respect to sustainable performance applying Multi-criteria decision analysis with a suitable objective tree and a multi-level criteria structure and examines the trading-off techniques for ranking of the alternatives. The framework proposes a multi-criteria and multi-stakeholders treatment which can be used as a pre-decisional support towards an implementation of nuclear fuel cycles adapted to national preferences and priorities. Proposed approach addresses some aspects of the environmental footprint of nuclear energy systems. Advanced nuclear fuel cycles, previously investigated by the NEA/OECD expert group WASTEMAN, are analyzed as a case study. Sustainability facets of waste management, resource utilization and economics are in focus.

Carbon nanotubes (CNTs) possess unique mechanical, physical, electrical and absorbability properties coupled with their nanometer dimensional scale that renders them extremely valuable for applications in many fields including nanotechnology and chromatographic separation. The aim of this review is to provide an updated overview about the applications of CNTs in chiral and achiral separations of pharmaceuticals, biologics and chemicals. Chiral SWCNTs and MWCNTs have been directly applied for the enantioseparation of pharmaceuticals and biologicals by using them as stationary or pseudostationary phases in chromatographic separation techniques such as high-performance liquid chromatography (HPLC), capillary electrophoresis (CE) and gas chromatography (GC). Achiral MWCNTs have been used for achiral separations as efficient sorbent objects in solid-phase extraction techniques of biochemicals and drugs. Achiral SWCNTs have been applied in achiral separation of biological samples. Achiral SWCNTs and MWCNTs have been also successfully used to separate achiral mixtures of pharmaceuticals and chemicals. Collectively, functionalized CNTs have been indirectly applied in separation science by enhancing the enantioseparation of different chiral selectors whereas, non-functionalized CNTs have shown efficient capabilities for chiral separations by using techniques such as encapsulation or immobilization in polymer monolithic columns.

Severe acute respiratory infection (SARI) is mainly caused by viral pathogens, with a high prevalence in high-risk populations such as infants and older adults. Co-infections by different viruses are frequent and, in some cases, associated with severe disease outcomes. Purpose: The main purpose of this study was to identify respiratory viruses circulating in Barranquilla during the COVID-19 pandemic peaks and estimate the prevalence of viral co-infections in samples from individuals with different degrees of respiratory infection. Methods: Between August and October 2021, 101 samples were collected from individuals with influenza-like illness (ILI) by the District Health Laboratory of Barranquilla and four local health care institutions and analyzed at Universidad Simón Bolívar. Eighteen respiratory viruses, including SARS-CoV-2, were analyzed via qRT-PCR using nasal swabs or nasopharyngeal aspirate samples. Results: Of the 101 study individuals, 56 were male and 45 were female (55.5% and 44.5%, respectively); 25.7% of individuals were infected with at least one of the evaluated viruses. Respiratory syncytial virus (RSV) and human rhinovirus (HRV) were the two most frequently detected viruses (30.7% and 15.4% of total positives, respectively). Co-infections with two or more respiratory viruses accounted for 42% of the total positive cases. Conclusion: Our findings indicate the presence of different respiratory viruses in swab or nasopharyngeal aspirate samples from individuals with ILI, including coinfection. These results reveal the circulation of several respiratory viruses in the city of Barranquilla, confirming their importance as potential causes of SARI in Colombia and the need for their active surveillance.

The aim of this study was to identify the differentially expressed genes (DEG) from the skeletal muscle and liver samples of animal model for metabolic diseases in human. To perform the study, the fatty acid (FA) profile and RNA sequencing (RNA-Seq) data of 35 samples of liver tissue (SOY1.5, n=17 and SOY3.0, n=18) and 36 samples of skeletal muscle (SOY1.5, n=18 and SOY3.0, n=18) of Large White pigs were analyzed. The FA profile of the tissues was modified by the diet, mainly those related to monounsaturated (MUFA) and polyunsaturated (PUFA) FA. The skeletal muscle transcriptome analysis revealed 45 DEG (FDR 10%), and the functional enrichment analysis identified network maps related to inflammation, immune process, and pathways associated with the oxidative stress, type 2 diabetes and metabolic dysfunction. For the liver tissue, the transcriptome profile analysis revealed 281 DEG, which participate in network maps related to neurodegenerative diseases. With this nutrigenomics study, we verified that different levels of soybean oil in the pig diet, an animal model for metabolic diseases in humans, affected the transcriptome profile of skeletal muscle and liver tissue. These findings may help to better understand the biological mechanisms that can be modulated by the diet.

The rising incidence of complex illnesses and their costs have revolutionized basic research, patient management, and societal needs. Between 70 to 90% of the risk of developing a disease is due to the air we breathe, the water we drink, and the surroundings in which we work and live. Visibly polluted, infectious or not, the fact remains that we are more than ever exposed to environmental risks. Air pollution is the fourth most prevalent deadly risk factor worldwide and by far the leading risk factor for hundreds of diseases, including respiratory infections, inflammatory illness, and cancer. Thus, an unhealthy environment can be considered as a pandemic, affecting 280 million people and claiming 12 million deaths every year. Although critical for identifying of the people at risk, the causal environment components (pollutants and/or the microbiome), and the affected physiological mechanisms are not well understood. Herein, we consider the dysregulation of macroautophagy (hereafter referred to as ‘autophagy’), as the mechanism at the heart of an immediate response to environmental stress. We discuss the missing link between the autophagy gene variations, and the exposome in the susceptibility, prognosis, and management of complex diseases when embracing personalized medicine.

In an era of rapid global change, our ability to understand and predict Earth's natural systems is lagging behind our ability to monitor and measure changes in the biosphere. Bottlenecks in our ability to process information have reduced our capacity to fully exploit the growing volume and variety of data. Here, we take a critical look at the information infrastructure that connects modeling and measurement efforts, and propose a roadmap that accelerates production of new knowledge. We propose that community cyberinfrastructure tools can help mend the divisions between empirical research and modeling, and accelerate the pace of discovery. A new era of data-model integration requires investment in accessible, scalable, transparent tools that integrate the expertise of the whole community, not just a clique of ‘modelers’. This roadmap focuses on five key opportunities for community tools: the underlying backbone to community cyberinfrastructure; data ingest; calibration of models to data; model-data benchmarking; and data assimilation and ecological forecasting. This community-driven approach is key to meeting the pressing needs of science and society in the 21st century.

Reducing levels of low-density-lipoprotein-cholesterol (LDL-C) below recommended thresholds is a core component of cardiovascular prevention strategies. We hypothesized that the addition of bempedoic acid to patients already on statin-ezetimibe therapy was more effective than titrating the statin dose in reducing LDL-C. The study enrolled 120 patients at high cardiovascular risk, and with LDL-C above 70 mg/dl. They were randomly divided in two groups: bempedoic acid (BA) group, taking bempedoic acid in addition to statin plus ezitimibe, and the statin titration (ST) group including patients who doubled the dose of statin. At 12-weeks, BA group presented a greater significant decrease of LDL-C compared to ST group (-22.9% vs 7.5% p 0.002). Total-cholesterol decreased significantly in the BA group compared to ST (-14.8% vs-4.7% ; p 0.013) No significant between-groups changes in HDL and triglycerides occurred. At 12 weeks the number of patients who reached LDL-C lower than 70 mg/dl was 38 (63%) in the BA group versus 22 (37%) in the ST group (between group p 0.034). In the BA group the LDL lowering effect of bempedoic acid was similar between patients taking atorvastatin and rosuvastatin. No side effects occurred during the follow up period. In conclusion, the addition of Bempedoic acid to statin/ezetimibe combined treatment was more effective than doubling the dose of statin in reducing LDL-C. levels and increased the number of patients reaching the LDL-C goal.

Pathogens that adapt to environmental stress can develop an increased tolerance to some physical or chemical antimicrobial treatments. The main objective of this study was to determine if acid adaptation increased the tolerance of Escherichia coli O157:H7 to high voltage atmospheric cold plasma (HVACP) in raw pineapple juice. Samples (10 ml) of juice were inoculated with non-acid-adapted (NAA) or acid adapted (AA) E. coli to obtain a viable count of ~ 7.00 log10 CFU/ml. The samples were exposed to HVACP (70 kV) for 1 to 7 min with inoculated non-HVACP-treated juice serving as control. Juice samples were analyzed for survivors at 0.1 h, and after 24 h of refrigeration (4 °C). Samples analyzed after 24 h exhibited significant decreases in viable NAA cells with sub-lethal injury detected in both NAA and AA survivors (P&lt;0.05). No NAA survivor in juice exposed to HVACP for 5 or 7 min was detected after 24h. However, numbers of AA survivors were 3.33 and 3.09 log10 CFU/ml in juice treated for 5 and 7 min, respectively (P&lt;0.05). These results indicate that acid adaptation increases the tolerance of E. coli to HVACP in pineapple juice. The potentially higher tolerance of AA E. coli O157:H7 to HVACP should be considered in developing safe juice processing parameters for this novel non-thermal technology.

Macadamia nut plantings in China are expanding year by year. In order to further promote the superior varieties, this study analyzed the effects of different varieties of rootstock and scion on the survival rate as well as the effects of 18 different ratios of substrate composition on seedling growth were analyzed. The results showed that: The survival rate of HAES788 varieties as rootstock and Guire No.1 as scion was the highest, reaching 96%. The optimal grafting time in December was better than that in March. Substrate formulations 12, 13, 15 and 16 had agglomerated soil and well-developed root systems compared to the controls. Plant height, stem diameter, leaf length, leaf width, and dry weight of aboveground and underground parts were significantly higher than those of the control. In addition, the substrate formulations 12, 13, 15 and 16 significantly improved the organic matter, total nitrogen, and total potassium content of the substrate soils, but little on total phosphorus content. All in all, macadamia grafting times are best in December, with HAES788 and Guire No.1 being the best rootstock and scion. Substrate formulations 12, 13, 15 and 16 are the optimal formula. This study provides a solid foundation to produce high-quality macadamia seedlings.

. In this work, two types of nanoporous alumina membranes were prepared using different acids and were tested. Structural features of the samples were investigated by scanning electron spectroscopy and further by different types of fractal dimension estimation methods. Transmission and scattering of accelerated He+ ions were studied in experiments on ion irradiation of dielectric channels based on porous alumina. Ion accelerator was used as a source of the He+ beam with an energy of 1.7 MeV. A scattering of ions was studied by Rutherford backscattering spectrometry. Helium transition through nanoporous alumina at various angles between the normal to the sample and the beam direction were observed. It is shown that the porous structure of anodic aluminum oxide is excellent as a dielectric matrix of nanocapillaries. Owing to the small angle scattering, it allows the transportation of the accelerated charged particles through the dielectric capillaries, and, as a result, localization of high energy ion irradiation effects. Additionally, according to the transmission UV-Vis spectra the energy gaps of samples obtained were calculated.

The Tisza River is the longest tributary of the Danube, draining the eastern part of the Carpathian Basin (Central Europe). Five countries share its catchment with different waste production and management practices. Large amounts of waste, including macroplastics (MaPs), are washed into the river. Some of the litter is trapped by the riparian vegetation forming litter accumulations. The study aimed to map the amount of litter by a citizen science program and remote sensing data and to compare the MaP data to the amount of microplastic fragments in sediments. Volunteers reported 3216 riverine litter accumulations from five countries along the entire length of the Tisza (2016–2022). The results suggest that low flow conditions (e.g., impoundment by dams) support litter and MaP trapping. The volume of large accumulations registered by the citizens showed a good correlation with the area of drifting litter revealed on Sentinel-2 images (2015–2021) using machine learning algorithms. Though the MaPs probably fragmentate during their fluvial transport, no clear connection was found between the volume of litter accumulations and the mean microplastic fragment content of sediments (2019–2022). The “Clean Tisza Map“ reveals the high degree of stranded pollutants along rivers and supports public cleanup activities.

As part of the Fabaceae project of northeastern Mexico, today we present the compendium of legumes of the subfamilies Caesalpinioideae, Cercidoideae and Detarioideae from this region. As in our previous work on the Mimosoideae Clade, new nomenclatural changes and retypification of genera of the subfamily Caesalpinioideae are included. Also, based on new scientific information published, the taxonomic changes in new genera, recently segregated from the genus Caesalpinia (Conzattia, Coulteria, Denisophytum, Erythrostemon, Guilandina, Hoffmannseggia, and Pomaria) are included. Based on field work, collection of botanical samples over the past 37 years, and reviewing botanical materials in national and international herbaria, the diversity of legumes of the subfamilies Caesalpinioideae, Cercidoideae, and Detarioideae in northeastern Mexico has been recorded. The subfamily Caesalpinioideae includes two tribes, the tribe Caesalpinieae with 12 genera (Caesalpinia, Ceratonia, Coulteria, Delonix, Denisophytum, Erythrostemon, Gleditsia, Guilandina, Hoffmannseggia, Haematoxylum, Parkinsonia, and Pomaria), and 26 species and the tribe Cassieae, which includes three genera (Cassia, Chamaecrita, and Senna) and 28 species. The subfamily Cercidoideae include two genera (Bauhinia and Cercis), and eight species and the subfamily Detarioideae, includes only one genus and one species (Tamarindus indicus). The total flora of these three subfamilies comprize 18 genera and 63 species, it includes 56 native species and seven exotic ones: Bauhinia variegata, Cassia fistula, Ceratonia siliqua, Delonix regia, Erythrostemon gilliesii, Senna alata, and, Tamarindus indicus. The endemism of both subfamilies includes a total of 20 species and 10 infraspecific categories.

Rich biodiversity is one of the Philippines’ greatest assets. Unfortunately, there is a continuous decline in the diversity of flora and fauna across the world. This calls for the need to educate people, especially younger generations, to value and protect biodiversity and natural resources. The study aimed to assess the students’ extent of knowledge and identify their perspectives towards biodiversity and its protection and conservation. A total of 268 randomly selected students at Aurora State College of Technology Zabali Campus were involved in the study. Survey questionnaires were used to obtain data and information which were subjected to statistical tests. The students had a moderate knowledge level on biodiversity with a mean score of 6.65 out of 10 items (SD = 1.50). Their perspective on biodiversity was leaning toward its protection and conservation, with a mean score of 7.2 out of 10 items (SD = 1.29). Factors affecting the students’ knowledge were gender (p = .003) and academic department (p = 0.003). Females and those associated with the Department of Forestry and Environmental Sciences and Department of Industrial technology were found to have more knowledge than the others. Males, on the other hand, were found to have a more positive perspective towards biodiversity. Knowledge and perspective had a weak correlation with r = 0.39. Students were not well-aware, but were in support of the Philippines’ biodiversity-related laws, which could help shape their mindset and actions towards biodiversity conservation and protection. As an implication, the college administration must revisit the curricula of all degree programs and ensure that students from each degree program are environmentally educated, emphasizing biodiversity conservation.

In this paper we will provide a new equation that explains why there are three generations or families of leptons and quarks, respectively. We will also explain why all those particles have the known mass ratios amongst their three respective generations and flavors. We will also tackle the problem of Yukawa couplings being arbitrary parameters in the Standard Model Higgs mechanism, which is a long standing problem do to their formulaic dependence on the Higgs Vacuum Expectation Value (VEV). We will attempt to solve this problem and provide a strong argument through an equation for Yukawa couplings of all leptons and quarks via a new methodology that depends on the running of the fine-structure constant on the Q scale, quantum numbers and the Weinberg angle (also on the Q scale). We will also make predictions for all three left-chiral neutrino mass eigenstates and we will provide upper limits for the three right-chiral neutrino mass eigenstates

The present study focuses on the investigation of fatigue, social support and quality of life that characterizes social workers. Furthermore, the study aims to highlight the effect of demographic and occupational characteristics on the above factors. A total of 400 social workers with an average age of 39.05 years took part in the research. Most were women, single, residents of cities of more than 100,000, and health care workers. Participants were asked to answer online questionnaires (FAS for fatigue, MSPSS for social support and GHQ-28 for quality of life). From the analysis of the data, it was found that the level of fatigue of the social workers is at low levels. At the same time, the level of occurrence of negative symptoms is also low, with physical symptoms appearing more often than the rest. Participants receive a high level of support from their environment, and more so from the "significant other" in their life. Finally, it was found that the fatigue, social support and quality of life of social workers is affected by the age of the social workers, the total years of service, gender, marital status, place of residence, employer and position of responsibility.

The production of photovoltaic modules is increasing to reduce greenhouse gas emissions. However, this results in a significant amount of waste at the end of their lifespan. Therefore, recycling these solar panels is important for environmental and economic reasons. However, collecting and separating Crystalline silicon, Cadmium Telluride, and Copper indium gallium selenide panels can be challenging, especially in underdeveloped countries. The innovation of this work is to develop a process to recycle all solar panel waste. The dissolution of all metals is studied through the leaching process as the main step of the flowchart. In the first step of leaching, silver can be recovered 98% by 0.5 nitric acid. Then, the second and third step involves the use of glycine for base metals dissolution, followed by the leaching of valuable metals with hydrochloric acid. The effect of parameters such as initial pH, acid concentration, solid/liquid ratio, and Hydrogen peroxide concentration are studied. The results show that Cu, Pb, Sn, Zn, Cd, In, Ga, and Se can be recovered until about 100% under optimal conditions. The optimal conditions for the dissolution of Cu, Zn, and Cd were the glycine concentration of 0.5 M, Temperature of 25 ˚C, the solid/liquid ratio of 10 gr/l, and 1% of Hydrogen peroxide. The optimized glycine concentration for the leaching of lead and tin was 1.5M. Indium and gallium were recovered to 100% by the use of 5M Hydrochloric acid, S/L=10gr/l, and T=45 ˚C. Separation of selenium and tellurium occurred by 0.5 M HCl at a temperature of 60 ˚C. Additionally, for the first time, a general outlook for the recycling of various end-of-life solar panels is suggested.

The concentration of total suspended particles (TSP) and nanoparticles (PM0.1) over Hat Yai city, Songkhla province, southern Thailand was measured in 2019. Organic carbon (OC) and elemental carbon (EC) were evaluated by carbon aerosol analyzer (IMPROVE-TOR) method. Thirteen trace elements including Al, Ba, K, Cu, Cr, Fe, Mg, Mn, Na, Ni, Ti, Pb, and Zn were evaluated by ICP-OES. Annual average TSP and PM0.1 mass concentrations were determined to be 58.3 ± 7.8 and 10.4 ± 1.2 µg/m3, respectively. The highest levels of PM occurred in the wet season with the corresponding values for the dry seasons being lower. The annual average OC/EC ratio ranged from 3.8 - 4.2 (TSP) and 2.5 - 2.7 (PM0.1). The char to soot ratios were constantly less than 1.0 for both TSP and PM0.1, indicating that land transportation is the main emission source. A principal component analysis (PCA) revealed that road transportation, industry, and biomass burning are the key sources of these particles. However, PM arising from Indonesian peatland fires causes an increase in the carbon and trace element concentrations in southern Thailand. The findings make useful information for air quality management and strategies for controlling this problem, based on a source apportionment analysis.

Between 11 to 15 February 2019, a dust storm originating from Central Australia with persistent westerly and south westerly winds caused high particles concentration at many sites in the state of New South Wales (NSW), both inland and along the coast. The dust continued on to New Zealand and to Antarctica in the south east. This study uses observed data from air quality monitoring stations in NSW and New Zealand, MODIS 3km AOD (Aerosol Optical Depth) product from Terra/Aqua and lidar aerosol profile from CALIPSO (Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations) satellite data, and the Weather Research Forecast WRF-Chem model based on GOCART-AFWA (Goddard Chemistry Aerosol Radiation and Transport – Air Force and Weather Agency) dust scheme and GOCART aerosol and gas-phase MOZART (Model for Ozone And Related chemical Tracers) chemistry model to study the long-range transport of aerosols for the period 11 to 15 February 2019 across eastern Australia and onto New Zealand and Antarctica. Wild fires also happened in northern NSW at the same time and their emissions are taken into account in WRF-Chem model by using Fire Inventory from NCAR (FINN) as emission input. Modelling results by the WRF-Chem model show that for the Canterbury region of South Island of New Zealand, peak concentration of PM10 (and PM2.5) as measured on 14 February 2019 at 05:00 UTC at the monitoring stations of Geraldine, Ashburton, Timaru and Woolston (Christchurch), which are more than 100km from each other and at Rangiora, Kaiapoi about 2 hours later, correspond to the prediction of high PM10 due to intrusion of dust to ground level from transported dust layer above. The Aerosol Optical Depth (AOD) observation data from MODIS Terra/Aqua and CALIOP lidar measurements on board CALIPSO satellite also indicate that high altitude of dust, originated from this dust storm event in Australia, was located above Antarctica. This study suggests that at present dust storms in Australia can transport dust from sources in Central Australia to the Tasman sea, New Zealand and Antarctica. This process has been going on for at least the last 170k years as indicated by dust found in ice cores from Antarctica and sediment records in the Tasman Sea.

When dealing with complex models in real situations, many optimization problems require using more than one objective function to represent the relevant characteristics of the system under consideration adequately. This is why multiobjective optimization algorithms that can deal with several objective functions are required in order to obtain reasonable results in an adequate processing time. This paper presents the multiobjective version of a recent metaheuristic algorithm that optimizes a single objective function, known as the Majority-minority Cellular Automata Algorithm (MmCAA), inspired by cellular automata operation. The algorithm presented here will be known as the Multiobjective Majority-minority Cellular Automata Algorithm (MOMmCAA). The MOMmCAA adds repository management and multiobjective search space density control to complement the performance of the MmCAA and make it capable of optimizing multiobjective problems. To evaluate the performance of the MOMmCAA, benchmark test sets are taken (DTLZ, quadratic, and CEC-2020), along with real-world engineering design problems, compared against other multiobjective algorithms recognized for their performance (MOLAPO, GS, MOPSO, NSGA-II, and MNMA). The results obtained in this work show that MOMmCA produces comparable performance with the other metaheuristic methods, which shows it as a competitive algorithm to be used for multiobjective problems. MOMmCAA was implemented in MATLAB, and its source code can be consulted in GitHub. https://github.com/juanseck/MOMmCAA

Medicago sativa L. (Alfalfa) is a globally recognized forage legume that has recently gained attention for its high protein content, making it suitable for both human and animal consumption. However, due to its perennial nature and autotetraploid genetics, conventional plant breeding requires a longer timeframe compared to other crops. Therefore, genetic engineering offers a faster route for trait modification and improvement. Here, we describe a protocol for achieving efficient transient gene expression in alfalfa through genetic transformation with the Agrobacterium tumefaciens pCAMBIA1304 vector. This vector contains the reporter genes β-glucuronidase (GUS) and green fluorescent protein (GFP), along with a selectable hygromycin B phosphotransferase gene, all driven by the CaMV 35s promoter. Various transformation parameters—such as different explant types, leaf ages, leaf sizes, wounding types, bacterial concentrations (OD600nm), tissue preculture periods, incubation periods, co-cultivation periods, and different concentrations of acetosyringone, silver nitrate, and calcium chloride—were optimized using 3-week-old plantlets raised in vitro. Results were attained from data based on the semi-quantitative observation of the percentage and number of GUS spots on different days of agro-infection in alfalfa explants. The highest percentage (76.2%) of GUS-positive alfalfa leaf explants was observed after 3 days of agroinfection at a bacterial concentration of 0.6, 2 days of preculture, 30 min of infection time, 150 µM acetosyringone, 4 mM calcium chloride, and 75 µM silver nitrate. The transient expression of genes of interest was confirmed via histochemical GUS and GFP assays. The results based on transient reporter gene expression suggest that various factors influence T-DNA delivery in the Agrobacterium-mediated transformation of alfalfa.

Traditional urban design often overlooks the synchronisation of human and ecological connectivities, typically favouring corridors for ecological continuity. Our study challenges this convention by introducing a computational design approach, Meta-Connectivity, leveraging the deep generative models performing cross-domain translation to integrate human-wildlife landscape connectivity in urban morphology amidst the planetary urbanisation. Utilising chained Pix2Pix models, our research illustrates a novel meta-connectivity design reasoning framework, combining landscape connectivity modelling with conditional reasoning based on deep generative models. This framework enables the adjustment of both human and wildlife landscape connectivities based on their correlative patterns in one single design process, guiding the re-materialisation of urban landscapes without the need for explicit prior ecological or urban data. Our empirical study in East London demonstrated the framework's efficacy in suggesting wildlife connectivity adjustments based on human connectivity metrics. The results demonstrate the feasibility of creating an innovative urban form in which the land cover guided by the connectivity gradients replaces the corridors based on simple geometries. This research thus presents a methodology shift in urban design, proposing a symbiotic approach to integrating disparate yet interrelated landscape connectivities within urban contexts.

The development of solar energy on a regional scale necessitates a thorough understanding of available resources. Cuba, facing prolonged economic, environmental, and energy crises, urgently needs to enhance its sustainability through solar energy. While solar resource mapping is widespread, Cuba lacks extensive field measurements, often relying on models that may not be ideally suited for large regions like Matanzas province. Spanning over 12,000 km² with nearly 150 km between its northern and southern extremes, Matanzas presents challenges for high-resolution solar mapping. This study introduces a methodology that integrates various methods and databases to achieve maximum resolution in the resulting solar map. The approach is designed for large areas where conventional high-resolution models fall short. By optimizing calculation times and parameterizing the entire surface latitudinally, a high-resolution solar resource map for Matanzas has been developed. This map significantly enhances the understanding of solar resources in Cuba and proposes new methodologies for analyzing solar potential in similarly large regions.

The extracellular matrix of most bacterial biofilms contains polysaccharides, proteins, and nucleic acids. These biopolymers have been shown to mediate fundamental biofilm-related phenotypes including surface attachment, intercellular adhesion, and biocide resistance. Enzymes that degrade polymeric biofilm matrix components, including glycoside hydrolases, proteases, and nucleases, are useful tools for studying the structure and function of biofilm matrix components and are also being investigated as potential antibiofilm agents for clinical use. Dispersin B is a well-studied, broad spectrum antibiofilm glycoside hydrolase produced by Aggregatibacter actinomycetemcomitans. Dispersin B degrades poly-N-acetylglucosamine, a biofilm matrix polysaccharide that mediates biofilm formation, stress tolerance, and biocide resistance in numerous Gram-negative and Gram-positive pathogens. Dispersin B has been shown to inhibit biofilm and pellicle formation; detach pre-formed biofilms; disaggregate bacterial flocs; sensitize pre-formed biofilms to detachment by enzymes, detergents, and metal chelators; and sensitize pre-formed biofilms to killing by antiseptics, antibiotics, bacteriophages, macrophages, and predatory bacteria. This review summarizes the results of nearly 100 in vitro and in vivo studies that have been carried out on dispersin B since it’s discovery 20 years ago. These include investigations into the biological function of the enzyme, it’s structure and mechanism of action, and its in vitro and in vivo antibiofilm activities against numerous bacterial species. Also discussed are potential clinical applications of dispersin B.

In order to obtain stable and reliable configuration transformation ability, reliability optimization design is regarded as an effective way to reduce the probability of kinematic function failure for the constrained metamorphic mechanism. Based on the structural composition principle of multi-configuration source metamorphic mechanism that can operate in an under-actuated state, the modularized calculation methods are established for the force analysis of augmented Assur groups including metamorphic kinematic joints. According to the equivalent resistance gradient model of metamorphic mechanisms, with considering the uncertainties in the link dimensions, masses, and compliance parameters et al, a probabilistic evaluation method for describing the configuration transformation ability of the constrained metamorphic mechanism is established. Based on reliability evaluation and reliability sensitivity analysis, a reliability optimization design method for improving the configuration transformation ability is proposed, and then the optimization design is carried out for tolerances of random variables focusing on those structural parameters with higher reliability sensitivity, so that the optimized results can satisfy the requirements of both reliability and economic simultaneously. Finally, the feasibility and effectiveness of the proposed method is verified by the illustration of a paper folding metamorphic mechanism. The research provides the foundation of reliability design of metamorphic mechanisms to obtain the high-probability repeated execution ability of configuration transformation, it also has theoretical and practical significance to promote the engineering application of metamorphic mechanisms.

There is increasing evidence that myocarditis starts as a patchy process, accordingly, the detection of segmental affection is important for early recognition of the disease and proper initiation of anti-inflammatory treatment. We present our first experience here with using speckle-tracking echocardiography to detect subtle segmental involvement of the left ventricle in two cases with suspected myocarditis. STE consolidated the diagnosis and helped with the early initiation of intravenous immunoglobulins and subsequent control of the disease. STE was also able to show the specific topography of distribution, of each pathogen linked to inflammation.

Abstract The of this study was to analyze the variation between within-week and between-playing positions on the locomotor and mechanical demands of soccer players. 19 elite soccer players of a team competing in the Turkish First League were included in the research. 86 training sessions of this team were evaluated. The differences between training performance metrics among microcycles for each position are revealed with repeated ANOVA and the differences between training performance metrics among positions in each microcycle are revealed with ANOVA. All the number of deceleration and acceleration per minute variables show statistical differences among the cycles for the defenders and midfielders but not for the forwards. These data suggested that there is a need to plan for different position-specific training stimuli in elite soccer teams for high performance outputs. We believe that these results can be used to determine positional demands by sports scientists and data analysts. Keywords: Soccer, TRIMP, Workload, Players, Heart Rate, GPS, Microcycles.

Violence against paramedics is increasingly recognized as an important occupational health problem, but pervasive and institutionalized underreporting hinders efforts at risk mitigation. Earlier research has shown that the organizational culture within paramedicine may contribute to underreporting and researchers have recommended involving paramedics in the development of violence prevention policies, including reporting systems. Eighteen months after the launch of a new comprehensive violence reporting system in Peel Region, Ontario, Canada, we surveyed paramedics about their willingness to report violent encounters. A total of 204 (33% of eligible) paramedics chose to participate, of whom 67% (N=137) had experienced violence since the launch of the new reporting process, with 83% (N=114) reporting the incidents at least some of the time. In choosing to report, participants cited the accessibility of the new reporting process and the desire to promote accountability among perpetrators while contributing to a safer workplace as motivating factors. Their decisions to file a report, however, could be influenced by the perceived ‘volitionality’ and severity of the violent encounters, particularly in the context of (un)supportive co-workers and supervisors. Ultimately, the participants’ belief that the report would lead to meaningful change within the service was a key driver of reporting behavior.

Leukemia, contributing to 3% of all cancer cases in the United States, presents a significant challenge in treatment due to its diverse subtypes, each dis-playing unique genetic and molecular abnormalities. The aggressive growth of ab-normal blood cells compromises immune function and poses challenges in developing effective therapeutic approaches. Unlike solid tumors, surgical resection is not an option, limiting treatment strategies to chemotherapy, immunotherapy, and radiation therapy, which may be nonspecific and lead to organ damage and toxicity. Anthracyclines, widely used in hematological tumors, face limitations due to severe cardiotoxicity, causing progressive cardiomyopathy and, in severe cases, congestive heart failure. Heart failure incidence is significantly higher in cancer patients treated with anthracyclines over 5, 10, and 15 years. Early detection of left ventricular dysfunction and cardiotoxicity is crucial to mitigate progression to congestive heart failure (CHF) in this population. Recent research by Bayrón-Marrero et al. reveals that lower levels of plasma soluble TREM-Like Transcript-1 (s-TLT-1), a platelet-specific receptor, correlate with left ven-tricular dysfunction in cardiovascular disease patients. Those with s-TLT-1 levels ex-ceeding 544 pg/mL exhibit a significant association with congestive heart failure. These findings suggest the potential use of s-TLT-1 as a diagnostic screening tool for early detection and treatment of anthracycline-induced CHF in leukemia patients.